CENTRIFUGAL PUMPS Gear Driven, Cast Iron Series 9000C-O Kynar™ is a registered trademark of Arkema, Inc. Desmopan® is a registered trademark of Bayer Aktiengesellschaft, Farbenfabriken. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. a Table of Contents Pumps and Engines......................................................................................................................................1-128 Selecting the Right Pump............................................................................................................................................................................................................... 2-10 Centrifugal Pumps........................................................................................................................................................................................................................ 11-54 Life Guard Silicon Carbide Pump Seals...................................................................................................................................................................................52 Self-Priming Adaptor (SPA).....................................................................................................................................................................................................53 Centrifugal Pump Accessories................................................................................................................................................................................................54 Transfer Pumps............................................................................................................................................................................................................................. 55-62 Roller Pumps................................................................................................................................................................................................................................ 63-73 Roller Pump Kits & Accessories........................................................................................................................................................................................ 71-72 Other Pump Accessories.........................................................................................................................................................................................................73 Diaphragm Pumps......................................................................................................................................................................................................................... 74-88 Diaphragm Pump Accessories, Kits and Control Units....................................................................................................................................................... 86-88 Shurflo Pumps............................................................................................................................................................................................................................ 89-104 Shurflo Diaphragm Pumps................................................................................................................................................................................................ 89-99 Shurflo Diaphragm Pump Accessories and Fittings........................................................................................................................................................100-101 Shurflo Mini-Bulk Chemical Transfer Systems and Accessories.....................................................................................................................................102-104 Piston / Plunger Pumps and Hydraulically-Driven Pressure Washers..........................................................................................................................................105-121 Specialty Pumps (Versa-Twin, Noryl, Hydraulic-Driven Gear Pump and Aqua-Tiger).....................................................................................................................122-126 Pump Cutaways................................................................................................................................................................................................................................127 PowerPro Gasoline Engines...............................................................................................................................................................................................................128 Spray Nozzles............................................................................................................................................129-214 Selecting the Right Spray Nozzles..............................................................................................................................................................................................130-133 Broadcast Spray Nozzles............................................................................................................................................................................................................134-165 Steaming Spray Nozzles.............................................................................................................................................................................................................166-171 Banding and Directed Spray Nozzles...........................................................................................................................................................................................172-187 Specialty Spray Nozzles..............................................................................................................................................................................................................188-200 Caps, Filters and Training Tools..................................................................................................................................................................................................201-203 Technical Information – Spray Nozzles.......................................................................................................................................................................................204-214 Accessories..............................................................................................................................................215-262 ProStop-E and Fence Row Control..............................................................................................................................................................................................216-217 Express Boom Assembly.............................................................................................................................................................................................................218-219 Duo React.........................................................................................................................................................................................................................................220 ProFlo Nozzle Bodies, Accessories, Boom Clamps and Foam Marker .........................................................................................................................................221-228 ProCap Tank Lids and Tank Accessories (ProClean)....................................................................................................................................................................229-233 Cleanload Chemical Eductor, Poly or Stainless Steel Eductor.....................................................................................................................................................234-235 Line Strainers............................................................................................................................................................................................................................236-237 Spray Guns & Lances.................................................................................................................................................................................................................238-242 Flowmeters.......................................................................................................................................................................................................................................243 Sprayer Control Valves...............................................................................................................................................................................................................244-247 Ball Valves.................................................................................................................................................................................................................................248-249 Gauges ......................................................................................................................................................................................................................................249-251 Universal Flange Clamps, Gaskets and Fittings..........................................................................................................................................................................252-253 Fittings, Cable Ties, Hose Clamps and Sealant...........................................................................................................................................................................254-264 Index.........................................................................................................................................................265-280 Limited Warranty on Hypro/SHURflo Pumps and Other Hypro Products......................................................... 281 Pumps and Engines Centrifugal Pumps.................................................................................... Page 11 • Commonly used with self-propelled sprayers, large-trailed sprayers, and construction equipment – Material Options: Cast Iron, Polypropylene, 316 Stainless Steel – Pressure Range: 0-150 psi (0- 10 bar) – Flow Range: 0-1078 gpm (0-4080 lpm) Transfer Pumps........................................................................................ Page 55 • Commonly used with tender trailers and fluid transfer stations – Material Options: Polypropylene, Aluminum, Cast Iron – Pressure Range: 0-55 psi (0- 3.8 bar) – Flow Range: 0-460 gpm (0-1740 lpm) Roller Pumps............................................................................................ Page 63 • Commonly used with 3-point sprayers, pest control, and de-icing skids – Material Options: Cast Iron, Ni-Resist, Silver Series XL – Pressure Range: 0-300 psi (0- 20 bar) – Flow Range: 0-60 gpm (0-227 lpm) Diaphragm Pumps.................................................................................... Page 74 • Commonly used with nutrient application systems, fruit & vegetable sprayers, and pressure cleaning system – Material Options: Aluminum, Brass, Polypropylene – Pressure Range: 0-725 psi (0- 50 bar) – Flow Range: 0-66 gpm (0-250 lpm) Shurflo Diaphragm Pumps....................................................................... Page 89 • Commonly used with ATV sprayers and nutrient application systems – Material Options: Polypropylene, Nylon – Pressure Range: 0-150 psi (0- 10 bar) – Flow Range: 0-5 gpm (0-19 lpm) Piston & Plunger Pumps......................................................................... Page 105 • Commonly used with pressure-cleaning and car wash systems –Material Options: Cast Iron, 316 Stainless Steel, Brass – Pressure Range: 0-3600 psi (0- 248 bar) –Flow Range: 0-45 gpm (0-170 lpm) Specialty Pumps..................................................................................... Page 122 – Versa-Twin: transferring liquids in carpet cleaning, pest control, and turf spraying – Noryl: bulk transfer of fertilizer and agricultural chemicals – Aqua-Tiger: general pumping applications where a flooded intake is provided PowerPro Engines.................................................................................. Page 128 1 Selecting the Right Pump Because the pump is the “heart of the liquid system” on equipment, careful consideration must be made in selecting the right pump. Seldom is there only one pump that will do the job. To make a wise choice, you will need to know about pump types, how the pump is driven, and the flow and pressure requirements for your specific spraying system and application. 1. Pump Types To ensure you can closely match the pump to your needs, Pentair manufactures six different types of pumps under the Hypro and SHUflo brands: centrifugal, transfer, roller, diaphragm, piston and plunger pumps. “Positive displacement” vs. “Non-positive displacement” Pumps can be divided into two general categories: “positive displacement” and “non-positive displacement.” Positive Displacement – In a positive displacement pump the flow from the pump is directly proportional to the pump speed. Liquid is captured and discharged as a fixed volume per revolution of the pump shaft. This positive flow is why all positive displacement pump installations must include a relief valve and bypass line between the pump outlet and the nozzle shut-off valve. Roller, diaphragm, piston and plunger pumps are positive displacement pumps. Non-positive Displacement – In a non-positive displacement pump a rotating impeller creates a centrifugal force that overcomes the restriction of liquid flow through the system. If the outlet is closed, the impeller continues to rotate harmlessly without damaging system components. Centrifugal and transfer pumps are non-positive displacement pumps. Centrifugal Pumps -Spray & Transfer Applications (non-positive displacement) In centrifugal pumps, liquid enters through the center of a rotating impeller that is driven at speeds up to 6000 RPM. Liquid is forced to the outer edge of the housing; this centrifugal force is what delivers the liquid to the nozzle. Traditionally thought of as low to medium pressure pumps, the Hypro line of centrifugal pumps can deliver from 0-150 psi (0-10 bar) and flow rates up to 440 gpm (1760 lpm). Centrifugal pumps have minimum surfaces to wear and no poppet valves, making them very durable, easy to maintain and well suited for pumping abrasive and corrosive materials. Because centrifugal pumps operate at higher speeds then the RPMs of a tractor PTO, the speed must be increased through a gear drive, belt drive, gas engine drive, or high-speed hydraulic motor drive. Pump models are specifically designed for each of these drive applications. The broad, versatile line includes models with rugged housings and components of cast iron, polypropylene, engineered plastics and stainless steel that endure the wide variety of agricultural chemicals. 2 Diaphragm Pumps (positive displacement) Diaphragm pumps are designed to isolate abrasive and corrosive solutions being pumped from its mechanical drive components through the use of synthetic diaphragms. Diaphragm pumps are compact, self-priming and produce low-to-high pressures 0 to 725 psi (0-50 bar) with flow rates of 3.8 to 65.7 gpm (14.5 -260 lpm). Driven by 540 rpm PTO, gas engine, or hydraulic motor, diaphragm pumps are used for a variety of agricultural, horticultural and pest control spraying applications. Shurflo pumps are efficient, 12 VDC electric motor driven low pressure diaphragm pumps designed for smaller spray applications with pressures 0-150 psi (0-10 bar) and flows 0-5.3 gpm (0-20 lpm). Shurflo pumps fit uniquely into mobile applications on ATV, home lawn care, fertilizer and pesticide equipment. Roller Pumps (positive displacement) The Hypro line of roller pumps are an economical choice by farmers throughout the world. The rollers revolve inside the pump housing on an eccentric profile to force spray solution through the pump which then develops pressure and flow. The roller pump offers a compact design with mechanical simplicity to provide a low initial cost pump that is extremely versatile. They operate efficiently at PTO speeds of 540 and 1000 rpm and have a wide pressure range of up to 300 psi (20 bar) and flow rates of 2 to 62 gpm (7 to 235 lpm). Roller pumps are self-priming and easily adapt to PTO or gas engine drives. Specific seal, roller and casting materials can be selected for compatibility with certain herbicides, pesticides, fungicides and fertilizers. Piston and Plunger Pumps (positive displacement) Piston/Plunger pumps have a shaft, pistons or plungers and “inlet” and “outlet” poppet valves. The design of the pump converts the rotational drive into a oscillating vertical motion. On the downstroke, the inlet valve opens, filling the chamber with solution. On the up-stroke, the outlet valve opens, and the piston forces the solution to the nozzle. Piston pumps deliver relatively low flow rate, less than 10 gpm (40 lpm), at pressures up to 1000 psi (69 bar). Plunger pumps are designed with ceramic plungers which can operate at higher pressures up to 3600 psi (248 bar) at flows up to 45 gpm (170 lpm). The main difference of construction is in a piston pump the sealing material moves with the piston while in a plunger pump the sealing material (u-cups) are stationary with only the plunger in motion. The replaceable piston cups can be of leather, fabric or Buna-N rubber, depending on the type of solution to be sprayed. They can be driven by 540 rpm PTO, gas engine, hydraulic or electric motor. Their low volume/ high pressure capability permits use in general spraying as well as task-oriented applications such as spraying fence rows and ditches, and hydrostatic testing. Plunger pumps are used primarily for cleaning operations. 3 SELECTING THE RIGHT PUMP Selecting the Right Pump Selecting the Right Pump 2. Pump Drives How a pump is to be driven is often a primary consideration in selecting the proper type of pump. If the power source has already been determined, the following chart may be of further help in selecting the type of pump that is best suited to your needs. How do you plan to drive the pump? If your power source is: Roller direct coupled: 540 rpm PTO X through gear drive: X through belt/pulley: X direct coupled: 1000 rpm PTO Centrifugal and Transfer X X X X X X X X X X X X X X through belt/pulley: X 12 Volt DC Motor X Electric Motor Piston/Plunger X through gear drive: Hydraulic Motor Gas Engine Diaphragm X direct coupled: X through gear reduction: X X through belt/pulley: X X direct coupled: X X through belt/pulley: X X 4 3. Flow and Pressure Requirements Pump pressure required is often dependent on the application. Whether it be low pressure band spraying or high pressure tree spraying, it is the application that dictates what pressure is needed to get the right performance at the spray nozzle. Once you know what pressure is desired choose a pump with extra pressure capacity due to losses in pressure as it goes through the system components (strainer, valves, elbows, hose, etc.) out to the nozzle. How Much Pressure Do You Need? Pressure Flow 0-150 psi (0-10 bar) Pump 0-1078 gpm (0-4080 lpm) 0-150 psi (0-10 bar) 0-5 gpm (0-20 lpm) 0-300 psi (0-20 bar) 0-60 gpm (0-225 lpm) Roller 0-725 psi (0-50 bar) 0-60 gpm (0-225 lpm) HYPRO Diaphragm 0-1000 psi (0-69 bar) 0-10 gpm (0-38 lpm) Piston/Plunger 0-3600 psi (0-248 bar) 0-45 gpm (0-170 lpm) Plunger Centrifugal Shurflo Diaphragm Pump flow required is dependent on several factors. Application rate, width of boom or size of nozzle, speed of travel and agitation. To review your pump flow requirements follow through the calculations presented on the following pages. As with pressure you will want to choose a pump that has additional flow so that it meets your application needs over time as performance drops due to component wear. How Much Flow Do You Need? Flow Pressure 0-5 gpm (0-20 lpm) 0-150 psi (0-10 bar) Shurflo Diaphragm 0-10 gpm (0-38 lpm) 0-1000 psi (0-70 bar) Piston/Plunger 0-45 gpm (0-170 lpm) 0-3600+ psi (248+ bar) 0-60 gpm (0-225 lpm) 0-300 psi (0-20 bar) Roller 0-60 gpm (0-225 lpm) 0-725 psi (0-50 bar) HYPRO Diaphragm 0-1078 gpm (0-4080 lpm) 0-150 psi (0-10 bar) 5 Pump Plunger Centrifugal SELECTING THE RIGHT PUMP Selecting the Right Pump Selecting the Right Pump Determining Pump Flow and Pressure Requirements Every pumping task has an optimum volume and pressure requirement. Determining that optimum (and selecting the pump that delivers it) is key to an efficient and economical spraying system operation. Pressure requirements for agricultural pumps are dependent on both the material to be applied and application targets. Soilapplied herbicides generally require a relatively low pressure pump rating of 30-60 psi with foliar-applied herbicides at the top end of that range and slightly higher. Insecticides and fungicides can require higher pressure ratings of 100 to 500 psi. Pressure must be sufficient, in the case of heavy foliage field crops and orchard crops, to penetrate the leaf foliage. In the case of orchard crops, pressure must also be sufficient to carry material up and over as well as into the canopy. A number of factors must be considered to properly determine the total flow you will need from your pump. They include: - Type of spray operation (broadcast, banding, low-level, etc.) - The chemical’s application rate, ground speed, boom width, hose length, tank agitation, etc. The spray task is the first consideration in determining flow rate and pressure needs. The following formulas and calculations may help. Calculating Agitation Requirements The pump must produce enough flow for both the application rate and tank agitation requirements. Too little agitation will not keep the solution in proper suspension and too much agitation may cause foaming. Here are rule of thumb formulas for calculating how much additional pump flow you will need for agitation. Liquids: Tank volume (gallons) x .05 = total agitation in gpm or Tank volume (litres) x .05 = total agitation in lpm Wetable Powders and Flowables: Tank volume (gallons) x .125 = total agitation in gpm or Tank volume (litres) x .125 = total agitation in lpm EXAMPLE: If you will be spraying a wettable powder from a 100-gallon tank, proper agitation will require 12.5 gpm additional flow from the pump. Reducing Agitation Flow Requirements Agitation flow requirements can be reduced by using jet agitation in the tank. Jet agitators use a venturi design to multiply agitation output. Depending on the jet agitator model and pressure, one gallon per minute input can provide two to ten gallons per minute agitation output. If your sprayer is equipped with a jet agitator, consult the operator’s manual or documentation to find the output to input ratio and adjust your flow required for agitation accordingly. Agitation Flow with Jet Agitation: required gpm x input or output required lpm x input output For example: If you calculate a requirement of 63 gpm of agitation and your jet agitator produces 3 to 1 output to input ratio, your pump would only need 1⁄3 of 63 gpm, or 21 gpm. 6 Factor in an “Excess Flow” Requirement It is wise to have some excess flow capacity so you will not end up with an undersized pump because actual operation conditions may cause changes in spray system performance (such as normal pump wear, operating at less than rated speeds, etc.). Hypro recommends you add an additional 20% to your calculated total pump flow requirement to compensate for these variables. Plumbing systems have a number of restrictions that will result in a pressure drop from the pump to the actual spray point. These must be taken into account and minimized. Calculating Pump Flow for Broadcast Boom Sprayers Chemical application is measured in gallons per acre (gpa) or litres per heactres (l/ha), whereas pump flow is stated in gallons per minute (gpm) or litres per minute (lpm). To calculate the pump flow required by a broadcast boom sprayer, multiply the application rate (from the chemical label) by the sprayer ground speed. Multiply the sum by the boom width on your sprayer. Then, divide that number by 495 for US units or by 600 for metric units. As a formula, it is written like this: Flow required for boom: gpm = gpa x mph x boom width (ft.) or 495 lpm = l/ha x km/hr x boom width (m) 600 The result will be the pump flow required to deliver the proper application rate at the boom’s nozzles. Then calculate your total pump flow requirement (broadcast): Flow required for boom: gpm Flow required for boom: lpm Flow required for agitation: + gpm Flow required for agitation: + lpm Sub-total = gpm = lpm Excess flow requirement: x TOTAL PUMP FLOW NEEDED:= or Sub-total 1.20 Excess flow requirement: gpm TOTAL PUMP FLOW NEEDED: x 1.20 = lpm Calculating Pump Flow for Banding Sprayers First, multiply the band width by the number of rows to determine the total width (w). Then, multiply the application rate (from the chemical label) by the ground speed. Multiply that result by the total width (w) calculated earlier, then divide the result by 5940 for US units or 60,000 for metric units. Here’s how the formula appears: Total band width of sprayer: w = rows x band width (inches) or w = rows x band width (cm) Flow required for banding nozzles: gpm = gpa x mph x w or 5940 lpm = l/ha x km/hr x w 60,000 The result will be the pump flow required to deliver the proper application rate at the boom’s nozzles. Then calculate your total pump flow requirement (banding): Flow required for boom: gpm Flow required for boom: lpm Flow required for agitation: + gpm Flow required for agitation: + lpm Sub-total = gpm or Sub-total = lpm Excess flow requirement: x TOTAL PUMP FLOW NEEDED: = 1.20 Excess flow requirement: gpm TOTAL PUMP FLOW NEEDED: 7 x 1.20 =lpm SELECTING THE RIGHT PUMP Selecting the Right Pump Selecting the Right Pump Calculating Pump Flow for Hand Gun Spraying For low-level spraying with a hand gun, such as for lawn and turf care, professional applicators typically “walk” the lawn at about 1,000 sq. ft. per minute or 100 sq. m per minute. That means the “gpm” or “lpm” rate of the hand gun will generally be the same as “gallons per 1,000 sq. ft.” or “litres per 100 sq. m.” To Determine Your Total Pump Flow Requirement: Flow required for gun/nozzle: Litres per 1,000ft2 (same as gpm) Flow required for agitation: + gpm Flow required for gun/nozzle: Litres per 1,000ft2 (same as gpm) Flow required for agitation: + lpm Sub-total = Sub-total = Excess flow requirement: x Excess flow requirement: x gpm 1.20 TOTAL PUMP FLOW NEEDED: = lpm 1.20 TOTAL PUMP FLOW NEEDED: = gpm lpm Use this same method for calculating the pump flow requirement for high pressure spraying, such as trees. Even though the application “rate” is usually a visual saturation of the tree, the known gpm or lpm factor will be the hand gun nozzle output, which is the rate you use for the calculation. Calculating Pump Pressure for Hand Gun Spraying For most hand gun chemical spraying, 40 psi (3 bar) at the nozzle is typical. To properly select a pump that can deliver the right nozzle pressure, you must consider the normal “pressure drop” that occurs within the length of hose. The amount of pressure drop through the hose depends on hose length, hose diameter and flow rate. For example, 300’ (90 m) of 1⁄2” hose spraying at 6 gpm (23 lpm), will have a pressure drop of approximately 120 psi (8 bar). That means you need a pump delivering at least 160 psi (12 bar) in order to ensure 40 psi (3 bar) at the nozzle. Desired pressure at gun nozzle: psi Hose pressure loss: + psi TOTAL PUMP PRESSURE NEEDED: = psi or Desired pressure at gun nozzle: bar Hose pressure loss: bar + TOTAL PUMP PRESSURE NEEDED: = bar NOTE: When determining the total pump pressure requirement for high tree spraying, you must also consider the spray height (or reach) you need to attain. Generally, pumps of up to 700 psi (50 bar) are used for this purpose. Pressure Loss at Various Rates of Flow of Water Through Hose* at temperature of 68° Fahrenheit (20°C.) *1⁄4-inch to 1-inch inside diameter FLOW Gallons per Minute Inside diameter hose size Pressure Loss, psi per 100 feet of hose, without couplings 8 SELECTING THE RIGHT PUMP System Hook-Ups Centrifugal Pumps ProClean Tank Rinse Nozzle Vent Line Agitation Line Rinse Valve Relief Valve Section Control Valves UF Clamps & Gaskets Line Strainer Electro Magnetic Flow Meter Cleanload Express End Cap Cleanload Chemical Induction System Hook-Ups Roller, Diaphragm Pumps ProCap Tank Lid ProClean Tank Rinse Nozzle Rate Controller Console Jet Agitator Suction Strainer Section Control Valves Ball Valve Pump Bypass Control Valve Tank Rinse UF Clamps & Gaskets Line Strainer Express End Cap Proportional ControlValve Pressure Relief Valve Electro-Magnetic Flowmeter ProFlo Nozzle Bodies & Nozzles Hypro carries all parts labeled above. Please contact your local Hypro dealer by using the "Where to Buy" function on our website at www.hypropumps.com, or call 1-800-424-9776 for more information. 9 System Hook-Ups Diaphragm Pumps, High Pressure Applications ProCap Tank Lid Spray Gun Line from Relief Valve Vented to Top of Tank to Atmospheric Pressure (Bypass Port) Jet Agitator Line Strainer Shut-off Ball Valve Outlet to Hose Reel and Spray Gun (High Pressure Port) Outlet to Jet Agitator (High Pressure Port) System Hook-Ups Small Twin® Piston Pumps Spray Gun Compound Gauge Filled Pressure Gauge Pulsation Dampener Pump Line Strainer Pressure Regulator attaches here Unloader Valve Bypass back to inlet Hypro carries all parts labeled above. Please contact your local Hypro dealer by using the "Where to Buy" function on our website at www.hypropumps.com, or call 1-800-424-9776 for more information. 10 CENTRIFUGAL PUMPS Gear Driven, Cast Iron Series 9000C-O Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Planetary oil-bath gear drive • Port sizes: 1-1/2" NPT inlet, 1-1⁄4" NPT outlet • Max. fluid temperature: 140°F/60°C • Housing: Cast iron • Impeller: Nylon • Pump shaft rotation: Counter clockwise when looking at the shaft end • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide (B) available • Life Guard seals are the industry standard on OEM equipment • Weight: 44 lbs./20 kg Order Information 9006C-O 9008C-O Max GPM 117 110 Max LPM 443 416 Max PSI 78 75 Max BAR 5.4 5.2 9016C-O 117 443 78 9018C-O 110 416 75 9028C-O 110 416 90029 110 416 Model Number Max RPM 600 1000 PTO Output Locking Collar and Mounting Clip 1-3⁄8" 6 spline (SAE) 540 rpm female 1-3⁄8" 21 spline (SAE) 1000 rpm female x x 5.4 600 1" ( 25.4 mm) Solid Shaft 5.2 1000 1" ( 25.4 mm) Solid Shaft 75 5.2 1000 1-3⁄4" 20 spline (SAE) 1000 rpm female x 75 5.2 1000 38mm 8 spline 1000 rpm female x 3430-0334 Seal and o-ring repair kit 3430-0591 Life Guard silicon carbide seal kit Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9006C-O-B) 9006C-O, 9016C-O U.S. Units GPM at 30 PSI 86 GPM at 40 PSI 71 GPM at 50 PSI 47 GPM at 60 PSI 500 GPM at 20 PSI 97 540 106 96 87 70 47 600 117 113 104 96 82 LPM at 2.1 BAR 326 LPM at 2.8 BAR 269 LPM at 3.4 BAR 178 LPM at 4.1 BAR 500 LPM at 1.4 BAR 367 540 401 363 329 265 178 600 443 428 394 363 310 RPM 9006C-O, 9016C-O RPM 9008C-O, 9018C-O, 9028C-O, 90029 GPM at 70 PSI RPM 800 63 Metric Units GPM at 20 PSI 82 GPM at 30 PSI 70 GPM at 40 PSI 53 U.S. Units GPM at 50 PSI 900 96 88 76 60 24 1000 110 102 96 86 70 LPM at 3.4 BAR LPM at 4.1 BAR 9008C-O, 9018C-O, 9028C-O, 90029 LPM at 4.8 BAR RPM 800 238 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 11 GPM at 60 PSI LPM at 1.4 BAR 310 LPM at 2.1 BAR 265 LPM at 2.8 BAR 201 GPM at 70 PSI 46 Metric Units 900 363 333 288 227 91 1000 416 386 363 326 265 LPM at 4.8 BAR 174 Gear Driven, Cast Iron, Self-Priming Series 9000C-O-SP Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Planetary oil-bath gear drive • Port sizes: 1-1⁄2" NPT inlet, 1-1⁄4" NPT outlet • Max. fluid temperature: 140°F/60°C • Housing: Cast iron • Impeller: Nylon • Pump shaft rotation: Counter clockwise when looking at the shaft end • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide (B) available • Life Guard seals are the industry standard on OEM equipment • Weight: 62 lbs./28.2 kg Order Information Max LPM 450 Max PSI 77 Max BAR 5.3 Max RPM 600 PTO Output Locking Collar and Mounting Clip 9006C-O-SP Max GPM 119 1-3⁄8" 6 spline (SAE) 540 rpm x 9016C-O-SP 119 450 77 5.3 600 1" (25.4 mm) solid shaft 9028C-O-SP 117 443 69 4.35 1000 1-3⁄4" 20 spline (SAE) 1000 rpm Model Number 3430-0334 Seal and o-ring repair kit 3430-0591 Life Guard silicon carbide seal kit 3430-0480SP Self priming chamber kit x Life Guard silicon carbide seal - Available upon request 9006C-O-SP, 9016C-O-SP GPM at 30 PSI 77 GPM at 40 PSI 51 GPM at 50 PSI 12 GPM at 60 PSI 500 GPM at 20 PSI 95 540 111 109 94 74 47 11 600 119 118 112 97 79 54 RPM 9006C-O-SP, 9016C-O-SP RPM 500 9028C-O-SP U.S. Units GPM at 10 PSI 101 GPM at 70 PSI 420 413 356 280 178 42 600 450 447 424 367 299 204 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. GPM at 30 PSI 57 GPM at 40 PSI 19 GPM at 50 PSI 940 105 1000 117 101 84 60 25 114 104 87 65 LPM at 1.4 BAR 307 LPM at 2.1 BAR 216 LPM at 2.8 BAR 72 LPM at 3.4 BAR 800 LPM at .07 BAR 344 940 397 382 318 227 95 1000 443 432 394 329 246 9028C-O-SP Metric Units LPM at LPM at LPM at LPM at LPM at LPM at LPM at 0.7 BAR 1.4 BAR 2.1 BAR 2.8 BAR 3.4 BAR 4.1 BAR 4.8 BAR 382 360 291 193 45 540 800 GPM at 20 PSI 81 RPM 23 U.S. Units GPM at 10 PSI 91 RPM 87 12 GPM at 60 PSI 33 Metric Units LPM at 4.1 BAR 125 CENTRIFUGAL PUMPS Gear Driven, Polypropylene Series 9000P-O Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Planetary oil-bath gear drive • Port sizes: 1-1⁄2" NPT inlet, 1-1⁄4" NPT outlet • Max. fluid temperature: 140°F/60°C • Housing: Polypropylene • Impeller: Polypropylene • Pump shaft rotation: Counter clockwise when looking at the shaft end • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide (B) available • Life Guard seals are the industry standard on OEM equipment • Weight: 37 lbs./16.8 kg Order Information Max GPM 97 94 97 94 Model Number 9006P-O 9008P-O 9016P-O 9018P-O 3430-0333 3430-0590 Max LPM 367 355 367 355 Max PSI 83 67 83 67 Max BAR 5.7 4.6 5.7 4.6 Max RPM 600 1000 600 1000 GPM at 60 PSI PTO Output Locking Collar Kit 1 3⁄8" 6 spline (SAE) 540 rpm female 1 3⁄8" 21 spline (SAE) 1000 rpm female 1" (25.4 mm) solid shaft 1" (25.4 mm) solid shaft Seal and o-ring repair kit Life Guard silicon carbide seal kit x x Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9006P-O-B) 9006P-O, 9016P-O 450 GPM at 10 PSI 73 GPM at 20 PSI 63 GPM at 30 PSI 52 GPM at 40 PSI 34 GPM at 50 PSI 500 81 77 67 55 37 550 88 85 78 68 56 RPM 600 97 97 93 85 76 9006P-O, 9016P-O GPM at 70 PSI 36 66 52 Metric Units 450 LPM at 0.7 BAR 276 LPM at 1.4 BAR 239 LPM at 2.1 BAR 196 LPM at 2.8 BAR 129 LPM at 3.4 BAR 500 307 291 255 208 142 550 333 323 295 257 210 137 600 367 367 354 323 288 249 RPM 9008P-O, 9018P-O U.S. Units LPM at 4.1 BAR RPM GPM at 20 PSI GPM at 30 PSI GPM at 40 PSI 800 70 64 53 34 900 83 79 70 58 42 1000 96 92 86 78 67 LPM at 1.4 BAR LPM at 2.1 BAR LPM at 2.8 BAR LPM at 3.4 BAR 9008P-O, 9018P-O LPM at 4.8 BAR Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. U.S. Units GPM at 10 PSI RPM 198 13 LPM at 0.7 BAR GPM at 50 PSI GPM at 60 PSI 52 Metric Units 800 314 243 200 128 900 363 299 265 220 161 1000 327 348 327 296 254 LPM at 4.1 BAR 198 Gear Driven, Cast Iron Series 9047C Features • Parallel oil-bath gear drive • Max. fluid temperature: 140º F/60º C • Impeller: Nylon • Pump shaft rotation: Counter clockwise when looking at the shaft end • Life Guard silicon carbide seal standard for increased life and dry-run protection • Life Guard seals are the industry standard on OEM equipment • Available in NPT and BSP self-priming versions Order Information Max GPM 213 195 195 Model Number 9047C 9047C-SP 9047C-BSP 3430-0779 9047C Max LPM 805 740 740 Max PSI 180 170 170 Max BAR 12.4 11.7 11.7 Max RPM 540 540 540 PTO Output Port Sizes 1-3/8" (SAE) 540 RPM Male 1-3/8" (SAE) 540 RPM Male 1-3/8" (SAE) 540 RPM Male Seal & O-ring repair kit 2" NPT inlet x 1-1/2" NPT outlet 2" NPT inlet x 2" NPT outlet 2" BSP inlet x 2" BSP outlet GPM at 150 PSI - GPM at 160 PSI - U.S. Units 450 GPM at 20 PSI 189 GPM at 30 PSI 189 GPM at 40 PSI 188 GPM at 50 PSI 188 GPM at 60 PSI 186 GPM at 70 PSI 184 GPM at 80 PSI 176 GPM at 90 PSI 168 GPM at 100 PSI 140 GPM at 110 PSI 119 GPM at 120 PSI 66 GPM at 130 PSI - GPM at 140 PSI - 500 199 199 199 198 197 196 195 194 193 186 172 145 106 - - - - 540 213 211 211 210 209 209 208 207 206 205 201 195 192 174 148 116 66 RPM LPM at 1.4 BAR LPM at 2.1 BAR LPM at 2.8 BAR LPM at 3.4 BAR LPM at 4.1 BAR LPM at 4.8 BAR LPM at 5.5 BAR LPM at 6.2 BAR LPM at 6.9 BAR LPM at 7.6 BAR LPM at 8.3 BAR LPM at 8.9 BAR LPM at 9.7 BAR LPMat 10.3BAR LPMat 11.0BAR LPMat 11.7BAR LPMat 12.4BAR 450 715 715 712 710 705 695 665 635 530 450 250 - - - - - - 500 755 755 755 750 745 742 740 735 730 705 650 550 400 - - - - 540 805 800 800 795 790 790 789 785 778 775 760 740 725 660 560 440 250 RPM 9047C GPM at 180 PSI - Metric Units 9047C-SP, 9047C-BSP 450 GPM at 20 PSI 174 GPM at 30 PSI 173 GPM at 40 PSI 169 GPM at 50 PSI 166 GPM at 60 PSI 157 GPM at 70 PSI 140 GPM at 80 PSI 119 GPM at 90 PSI 92 GPM at 100 PSI 61 GPM at 110 PSI 26 500 185 182 180 178 174 172 164 153 132 119 540 195 194 194 193 190 186 184 181 174 162 RPM GPM at 170 PSI - 9047C-SP, 9047C-BSP GPM at 120 PSI - U.S. Units GPM at 130 PSI - GPM at 140 PSI - GPM at 150 PSI - GPM at 160 PSI - 95 69 20 - - 148 127 99 79 53 LPM at 9.7 BAR - LPM at 10.3 BAR - Metric Units 450 LPM at 1.4 BAR 660 LPM at 2.1 BAR 655 LPM at 2.8 BAR 640 LPM at 3.4 BAR 630 LPM at 4.1 BAR 595 LPM at 4.8 BAR 530 LPM at 5.5 BAR 450 LPM at 6.2 BAR 350 LPM at 6.9 BAR 230 LPM at 7.6 BAR 100 LPM at 8.3 BAR - LPM at 8.9 BAR - 500 700 690 680 675 660 650 620 580 500 450 360 260 75 - - 540 740 735 735 730 720 705 695 685 660 615 560 480 375 300 200 RPM 14 LPM at 11.0 BAR - Series 9202C and 9202S Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard • Extend pump life with Stainess Steel – Fact: Chemical corrosion, pump cavitation, and abrasive wear are key factors in pump life – 316 Stainless Steel pumps provide superior chemical corrosion resistance, while maintaining material strength to prolong the life against abrasive wear – 316 Stainless Steel resists cavitation pitting of pumps, extending the wear life – Drop in replacements for cast iron pumps Features • Available in cast iron and 316 stainless steel for extended pump life • Pedestal mount, direct drive • Port sizes: 1-1⁄4" NPT inlet, 1" NPT outlet • Max. fluid temperature: 140°F/60°C • Impeller: Nylon (cast iron standard); polypropylene (stainless standard) • Pump shaft rotation: Counter clockwise when looking at the shaft end, 9202S-R is Clockwise • Pump seals: Viton®/ceramic standard (Life Guard silicon carbide (B) available); Life Guard silicon carbide standard in stainless steel pumps • Life Guard seals are the industry standard on OEM equipment • Weight: 18 lbs./8.2 kg Order Information Max GPM 103 103 103 Model Number 9202C 9202S 9202S-R 3430-0332 3430-0589 Max LPM 390 390 390 Max PSI 170 170 170 Max BAR 11.7 11.7 11.7 Max RPM 6000 6000 6000 Shaft Output 5⁄8" (15.9 mm) solid shaft 5⁄8" (15.9 mm) stainless steel shaft 5⁄8" (15.9 mm) stainless steel shaft Seal and o-ring repair kit Life Guard silicon carbide seal kit Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9202C-B) 9202C, 9202S, 9202S-R RPM 10 PSI GPM HP U.S. Units 20 PSI GPM HP 40 PSI GPM HP 60 PSI GPM HP 80 PSI GPM HP 100 PSI GPM HP 120 PSI GPM HP 2400 50 1.3 46 1.2 3600 67 3.7 66 3.7 62 3.5 34 2.6 4200 75 5.7 75 5.7 75 5.7 66 5.3 44 4.2 5000 88 9.3 88 9.3 88 9.3 88 9.3 77 8.6 60 7.5 24 6.4 6000 103 15.6 103 15.6 103 15.6 103 15.6 103 15.6 100 15.5 91 14.8 9202C, 9202S, 9202S-R RPM 0.7 BAR LPM HP 1.4 BAR LPM HP 2.8 BAR LPM HP 4.1 BAR LPM HP 5.5 BAR LPM HP 6.9 BAR LPM HP 8.3 BAR LPM HP 2400 189 1.3 174 1.2 3600 254 3.7 250 3.7 235 3.5 129 2.6 4200 284 5.7 284 5.7 284 5.7 250 5.3 167 4.2 5000 333 9.3 333 9.3 333 9.3 333 9.3 291 8.6 227 7.5 91 6.4 6000 390 15.6 390 15.6 390 15.6 390 15.6 390 15.6 379 15.5 344 14.8 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 15 140 PSI GPM HP 75 14 Metric Units 9.7 BAR LPM HP 284 14 CENTRIFUGAL PUMPS Pedestal Mount, Cast Iron & Stainless Steel Pedestal Mount, Cast Iron & Stainless Steel Series 9203C and 9203S Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard • Extend pump life with Stainess Steel – Fact: Chemical corrosion, pump cavitation, and abrasive wear are key factors in pump life – 316 Stainless Steel pumps provide superior chemical corrosion resistance, while maintaining material strength to prolong the life against abrasive wear – 316 Stainless Steel resists cavitation pitting of pumps, extending the wear life – Drop in replacements for cast iron pumps Features • Available in cast iron and 316 stainless steel for extended pump life • Pedestal mount, direct drive • Port sizes: 1-1⁄2" NPT inlet, 1-1⁄4" NPT outlet • 220 x 200 Universal flange available (U) • Max. fluid temperature: 140°F/60°C • Impeller: Nylon (cast iron standard); polypropylene (stainless standard); GTX available • Pump shaft rotation: Counter clockwise when looking at the shaft end; 9203C-R is clockwise • Pump seals: Cast Iron models – Viton®/ceramic standard; Life Guard silicon carbide (B) available; Stainless Steel models – Life Guard silicon carbide standard • Life Guard seals are the industry standard on OEM equipment • Stainless steel models now available with universal flanges • Weight: 19 lbs./8.6 kg For Flanged Connections You Will Also Need: Universal Flange Gasket Universal Flange Clamp See 250 for details Order Information Max GPM 140 140 140 140 Model Number 9203C † 9203C-R (CW) 9203S † 9203S-R (CW) 3430-0332 3430-0589 Max LPM 530 530 530 530 Max PSI 170 170 170 170 Max PSI Max RPM (BAR) 11.7 6000 11.7 6000 11.7 6000 11.7 6000 † Universal Flange (220 x 200) - Add Suffix “U” (i.e.: 9203C-U Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9203C-B) 9203C, 9203S, 9203C-R, 9203S-R RPM 10 PSI GPM HP 20 PSI GPM HP 40 PSI GPM HP Shaft Output 5⁄8" (15.9 mm) solid shaft 5⁄8" (15.9 mm) solid shaft 5⁄8" (15.9 mm) stainless steel shaft 5⁄8" (15.9 mm) stainless steel shaft Seal and o-ring repair kit Life Guard silicon carbide seal kit 60 PSI GPM HP 80 PSI GPM HP 100 PSI GPM HP 120 PSI GPM HP U.S. Units 140 PSI GPM HP 2400 80 1.9 65 1.8 3600 105 5.3 105 5.3 92 5.0 50 4200 122 8.2 120 7.9 115 7.7 98 7.1 56 5.3 5000 140 12.6 140 12.6 138 12.6 130 12.2 118 11.6 88 9.9 45 7.2 5500 140 14.9 140 14.9 138 14.9 135 15.2 130 15.2 118 14.4 90 12.5 60 9.8 6000 140 17.1 140 17.1 140 17.5 140 18.0 135 18.2 132 18 125 18.2 103 16.3 3.7 9203C, 9203S, 9203C-R, 9203S-R RPM 0.7 BAR LPM HP 1.4 BAR LPM HP 2400 303 1.9 246 1.8 3600 397 5.3 397 4200 462 8.2 454 5000 530 12.6 5500 530 6000 530 Metric Units 2.8 BAR LPM HP 4.1 BAR LPM HP 5.3 348 5.0 189 7.9 435 7.7 371 7.1 212 5.3 530 12.6 522 12.6 492 12.2 447 14.9 530 14.9 522 14.9 511 15.2 17.1 530 17.1 530 17.5 530 18.0 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 5.5 BAR LPM HP 6.9 BAR LPM HP 8.3 BAR LPM HP 9.7 BAR LPM HP 11.6 333 9.9 170 7.2 492 15.2 447 14.4 341 12.5 227 9.8 511 18.2 500 18 473 18.2 409 16.3 3.7 16 Series 9203C-SP and 9203S-SP Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard • Extend pump life with Stainess Steel – Fact: Chemical corrosion, pump cavitation, and abrasive wear are key factors in pump life – 316 Stainless Steel pumps provide superior chemical corrosion resistance, while maintaining material strength to prolong the life against abrasive wear – 316 Stainless Steel resists cavitation pitting of pumps, extending the wear life – Drop in replacements for cast iron pumps Features • Available in cast iron and 316 stainless steel for extended pump life • Pedestal mount, direct drive • Port sizes: 1-1⁄2" NPT inlet, 1-1⁄4" NPT outlet (9203C-SP, 9203S-SP); 2" NPT inlet, 2" NPT outlet (9203C-R-SP) • Max. fluid temperature: 140°F/60°C • Impeller: Nylon (cast iron standard); polypropylene (stainless steel); GTX available Order Information Max GPM 120 140 120 Model Number 9203C-SP 9203C-R-SP (CW) 9203S-SP 3430-0332 3430-0589 3430-0480SP 3430-0482SP Max LPM 454 530 454 • Pump shaft rotation: Counter clockwise when looking at the shaft end; 9203C-R-SP is clockwise • Pump seals: Cast Iron models – Viton®/ceramic standard; Life Guard silicon carbide (B) available; Stainless Steel models – Life Guard silicon carbide standard • Life Guard seals are the industry standard on OEM equipment • Weight: 31.7 lbs./14.4 kg – Stainless Steel; 29 lbs./13.2 kg - Cast Iron Max BAR 10.8 10.7 10.8 Max PSI 157 155 157 Max RPM Shaft Output 6000 6000 6000 5⁄8" (15.9 mm) solid shaft 5⁄8" (15.9 mm) solid shaft 5⁄8" (15.9 mm) stainless steel shaft Seal and o-ring repair kit Life Guard silicon carbide seal kit Self priming chamber kit Self priming chamber kit for reverse rotation ONLY Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9203C-SP-B) 9203C-R-SP 20 PSI RPM 3600 4200 5000 5500 6000 GPM 80 102 127 135 138 RPM 4200 5000 5500 6000 1.4 BAR LPM HP 386 6.1 481 10.5 511 13.5 522 15.7 9203C-R-SP HP 3.8 6.1 10.5 13.5 15.7 GPM 43 76 109 125 132 GPM 101 118 120 120 120 20 PSI HP 4.2 6.7 10.1 12.1 14.3 9203C-SP, 9203S-SP RPM 3600 4200 5000 5500 6000 1.4 BAR LPM HP 382 4.2 447 6.7 458 10.1 458 12.1 458 14.3 HP 2.9 5.4 9.8 13.1 15.7 2.8 BAR LPM HP 288 5.4 413 9.8 473 13.1 500 15.7 9203C-SP, 9203S-SP RPM 3600 4200 5000 5500 6000 40 PSI GPM 60 97 119 119 119 40 PSI HP 3.4 6.1 10.3 12.7 15.0 2.8 BAR LPM HP 227 3.4 367 6.1 450 10.3 450 12.7 450 15.0 GPM 60 PSI 38 86 110 122 HP GPM 4 8.7 12.3 15.1 55 83 111 4.1 BAR LPM HP 144 4 326 8.7 416 12.3 462 15.1 GPM 54 110 116 116 60 PSI ® HP 7.2 10.9 14.1 100 PSI GPM HP 18 57 93 5.5 BAR LPM HP LPM 208 314 420 68 216 352 HP GPM 4.7 10.1 13.2 15.7 78 110 114 7.2 10.9 14.1 80 PSI 295 416 432 95 299 416 8.7 12.8 16.0 21 67 6.9 12.2 U.S. Units 140 PSI GPM HP 32 9.5 Metric Units 8.3 BAR LPM HP 9.7 BAR LPM HP 5.4 9.3 13.2 79 254 121 25 79 110 204 416 439 439 120 PSI GPM HP HP 8.7 12.8 16.0 LPM 17 6.9 BAR 100 PSI GPM HP 5.5 BAR LPM HP 4.7 10.1 13.2 15.7 5.4 9.3 13.2 HP 4.1 BAR LPM HP Viton is a registered trademark of DuPont. Hypro is a registered trademark of Pentair. ® 80 PSI 5.8 11.0 16.0 6.9 BAR GPM 29 82 6.9 12.2 120PSI 9.5 U.S. Units HP 7.6 14.0 140 PSI GPM HP 40 10.6 Metric Units HP 8.3 BAR LPM HP 9.7 BAR LPM HP 5.8 11.0 16.0 110 310 157 7.6 14.0 10.6 CENTRIFUGAL PUMPS Pedestal Mount, Cast Iron & Stainless Steel, Self-Priming Pedestal Mount, Cast Iron Series 9205C Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Pedestal mount, direct drive • Port sizes: 2" NPT inlet, 1-1⁄2" NPT outlet • Max. fluid temperature: 140°F/60°C • Housing: Cast iron • Impeller: Nylon • Pump shaft rotation: Counter clockwise when looking at the shaft end • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide (B) available • Life Guard seals are the industry standard on OEM equipment • Weight: 47 lbs./21.4 kg Order Information Model Number 9205C Max GPM 180 Max LPM 681 Max PSI 196 Max BAR 13.5 Max RPM 4200 Shaft Output 7⁄8" (22.2 mm) solid keyed shaft 3430-0537 Seal and o-ring repair kit 3430-0646 Life Guard silicon carbide seal kit Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9205C-B) 9205C RPM 20 PSI GPM HP 40 PSI GPM HP 60 PSI GPM HP 80 PSI GPM HP 100 PSI GPM HP 120 PSI GPM HP 140 PSI GPM HP 3000 165 11.4 164 11.7 154 11.6 104 9.5 3400 175 14.8 175 15.5 173 16.3 168 16.3 127 14.2 43 8.7 3800 180 18.2 180 18.8 180 19.8 178 21.1 173 21.8 156 20.7 112 17.5 4200 180 21.9 180 22.0 180 24.0 180 25.3 180 26.9 177 27.9 173 28.1 9205C RPM 3000 3400 3800 4200 1.4 BAR LPM HP 625 11.4 662 14.8 681 18.2 681 21.9 2.8 BAR LPM HP 621 11.7 662 15.5 681 18.8 681 22.0 4.1 BAR LPM HP 583 11.6 655 16.3 681 19.8 681 24.0 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 5.5 BAR LPM HP 394 9.5 636 16.3 674 21.1 681 25.3 18 6.9 BAR LPM HP 8.3 BAR LPM HP 9.7 BAR LPM HP 481 655 681 163 591 670 424 655 14.2 21.8 26.9 8.7 20.7 27.9 17.5 28.1 U.S. Units 160 PSI GPM HP 157 26.4 Metric Units 11.0 BAR LPM HP 594 26.4 CENTRIFUGAL PUMPS Pedestal Mount, Cast Iron, Self-Priming Series 9205C-SP Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Pedestal mount, direct drive • Port sizes: 2" NPT inlet, 2" NPT outlet (9205C-SP) 2" BSP inlet, 2" BSP outlet (9205C-BSP) • Max. fluid temperature: 140°F/60°C • Housing: Cast iron • Impeller: Nylon • Pump shaft rotation: Counter clockwise when looking at the shaft end • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide (B) available • Life Guard seals are the industry standard on OEM equipment • Weight: 48 lbs./21.8 kg Order Information 9205C-SP Max GPM 160 Max LPM 606 Max PSI 145 Max BAR 10.0 Max RPM 3800 7⁄8" (22.2 mm) solid keyed shaft 9205C-BSP 160 606 145 10.0 3800 7⁄8" (22.2 mm) solid keyed shaft Model Number Shaft Output 3430-0537 Seal and o-ring repair kit 3430-0646 Life Guard silicon carbide seal kit 3430-0481SP Self priming chamber kit Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9205C-SP-B) 9205C-SP, 9205C-BSP RPM 3400 GPM at 40 PSI 155 U.S. Units GPM at 50 PSI 154 GPM at 60 PSI 153 GPM at 70 PSI 150 GPM at 80 PSI 131 GPM at 90 PSI 110 GPM at 100 PSI 84 GPM at 110 PSI 35 GPM at 120 PSI GPM at 130 PSI GPM at 140 PSI 28 3600 158 157 156 155 153 137 114 88 58 3800 160 159 158 157 156 155 142 123 102 74 LPM at 3.4 BAR 583 LPM at 4.1 BAR 579 LPM at 4.8 BAR 568 LPM at 5.5 BAR 496 LPM at 6.2 BAR 416 LPM at 6.9 BAR 318 LPM at 7.6 BAR 132 LPM at 8.3 BAR LPM at 8.9 BAR 9205C-SP, 9205C-BSP RPM 3400 LPM at 2.8 BAR 587 3600 598 594 591 587 579 518 432 333 220 3800 606 602 598 594 591 587 538 466 383 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 19 280 Metric Units LPM at 9.7 BAR 106 Pedestal Mount, Cast Iron & Stainless Steel Series 9206C and 9206S Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard • Extend pump life with Stainess Steel – Fact: Chemical corrosion, pump cavitation, and abrasive wear are key factors in pump life – 316 Stainless Steel pumps provide superior chemical corrosion resistance, while maintaining material strength to prolong the life against abrasive wear – 316 Stainless Steel resists cavitation pitting of pumps, extending the wear life – Drop in replacements for cast iron pumps Features • Available in cast iron and 316 stainless steel for extended pump life • Pump shaft rotation: Counter clockwise when looking at the shaft end • Pedestal mount, direct drive • Pump seals: Cast Iron models – Viton®/ceramic standard; Life Guard silicon carbide (B) available; Stainless Steel models – Life Guard silicon carbide standard • Port sizes: 2" NPT inlet, 1-1⁄2" NPT outlet • 220 x 220 (U) and 300 x 220 (-3U models) universal flange available • Life Guard seals are the industry standard on OEM equipment • Weight: 23 lbs./10.5 kg • Max. fluid temperature: 140°F/60°C • Impeller: Nylon (standard in cast iron); polypropylene (standard in stainless steel); GTX available For Flanged Connections You Will Also Need: Universal Flange Gasket Universal Flange Clamp Order Information See page 252 for details 9206C* Max GPM 225 Max LPM 852 Max PSI 80 Max BAR 5.5 Max RPM 4200 5⁄8" ( 15.9 mm) solid shaft 9206S 225 852 80 5.5 4200 5⁄8" ( 15.9 mm) stainless steel shaft Model Number Shaft Output 3430-0332 Seal and o-ring repair kit 3430-0589 Life Guard silicon carbide seal kit *Universal Flange (220 x 220) - Add Suffix “U” (i.e.: 9206C-U), Universal Flange (300 x 220) - Add Suffix “3U” (i.e.: 9206C-3U), Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9206C-B) 9206C, 9206S, 9206C-U, 9206S-3U RPM 10 PSI GPM HP 20 PSI GPM HP 30 PSI GPM HP 40 PSI GPM HP 50 PSI GPM HP 2400 171 2.3 114 2.0 3600 225 7.0 225 7.1 225 7.5 196 7.3 143 6.1 4200 225 9.2 225 9.4 225 10.7 225 11.0 225 11.3 9206C, 9206S, 9206C-U, 9206S-3U RPM 0.7 BAR LPM HP 1.4 BAR LPM HP 2.1 BAR LPM HP 2.8 BAR LPM HP 3.4 BAR LPM HP 2400 647 2.3 432 2.0 3600 852 7.0 852 7.1 852 7.5 742 7.3 541 6.1 4200 852 9.2 852 9.4 852 10.7 852 11.0 852 11.3 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 20 60 PSI GPM HP 70 PSI GPM HP 202 158 10.9 9.5 U.S. Units 80 PSI GPM HP 80 6.4 Metric Units 4.1 BAR LPM HP 4.8 BAR LPM HP 5.5 BAR LPM HP 765 598 303 10.9 9.5 6.4 CENTRIFUGAL PUMPS Pedestal Mount, Cast Iron Series 9208 Features • 5” ANSI-flanged inlet x 4” ANSI-flanged outlet • 316 stainless steel impeller for superior corrosion resistance • 9208 version includes a solid 416 stainless steel shaft for corrosion resistance • The 9208 shaft diameter is 1.63” (41.3 mm) to allow direct coupling to electric motors • Life Guard silicon carbide seal for premium abrasion resistance and dry run protection • Life Guard seals are the industry standard on OEM equipment • Pump shaft rotation: Counter clockwise when looking at the shaft end Order Information Model Number 9208C Max GPM 1400 Max LPM 5300 Max PSI 85 Max BAR 5.9 Max RPM 3000 Shaft Output 1-5⁄8" (41.3 mm) solid keyed Stainless Steel shaft 3430-0604 9208C Life Guard silicon carbide seal kit 9208C U.S. Units 40 PSI GPM HP GPM 1750 2500 1071 32.3 852 31.0 474 24.4 2500 4054 32.3 3225 31.0 1794 24.4 2750 1052 38.5 1027 42.0 788 38.2 2750 3982 38.5 3888 42.0 2983 38.2 RPM 60 PSI Metric Units 20 PSI GPM HP 607 10.8 RPM HP 1750 21 1.4 BAR LPM HP 2298 10.8 2.8 BAR LPM HP 4.1 BAR LPM HP Pedestal Mount, Polypropylene Series 9203P-S Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Pedestal mount • For belt and pulley drive • Port sizes: 1-1⁄2" NPT inlet, 1-1⁄4" NPT outlet • Max. fluid temperature: 140°F/60°C • Housing: Polypropylene • Impeller: Polypropylene • Pump shaft rotation: Counter clockwise 9203P-S, when looking at the shaft end; 9203P-SR is clockwise • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide (B) available • Life Guard seals are the industry standard on OEM equipment • Weight: 14 lbs./6.4 kg Order Information 9203P-S Max GPM 100 Max LPM 379 Max PSI 82 Max BAR 5.7 Max RPM 4200 9203P-SR 100 379 82 5.7 4200 Model Number Shaft Output 7⁄8" (22.2 mm) solid keyed stainless steel shaft 7⁄8" (22.2 mm) solid keyed stainless steel shaft 3430-0333 Seal and o-ring repair kit 3430-0590 Life Guard silicon carbide seal kit Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9203P-S-B) 9203P-S, 9203P-SR RPM 10 PSI GPM HP U.S. Units 20 PSI GPM HP 30 PSI GPM HP 40 PSI GPM HP 50 PSI GPM HP 60 PSI GPM HP 2400 55 1.5 49 1.4 32 1.1 3600 89 4.4 87 4.3 81 4.1 71 3.9 58 3.6 37 3.1 4200 100 6.7 100 6.6 97 6.5 90 6.3 82 6.0 71 5.7 9203P-S, 9203P-SR RPM 0.7 BAR LPM HP 1.4 BAR LPM HP 2.1 BAR LPM HP 2.8 BAR LPM HP 3.4 BAR LPM HP 4.1 BAR LPM HP 2400 208 1.5 185 1.4 121 1.1 3600 337 4.4 329 4.3 307 4.1 269 3.9 220 3.6 140 3.1 4200 379 6.7 379 6.6 367 6.5 341 6.3 310 6.0 269 5.7 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 22 70 PSI GPM HP 60 5.2 80 PSI GPM HP 39 4.4 Metric Units 4.8 BAR LPM HP 5.5 BAR LPM HP 227 148 5.2 4.4 CENTRIFUGAL PUMPS Flange Mount, Polypropylene Series 9213P Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Mounts clockwise rotation (when looking at the shaft end) — for direct mount to gasoline engines • Shaft: 3⁄4" (19 mm) hollow, 416 stainless steel • Port size: 1-1/2" NPT inlet, 1-1/4" NPT outlet • Max. fluid temperature: 140°F/60°C • Housing: Polypropylene • Impeller: Polypropylene • Flange bolt pattern for 5 hp gas engine • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide (B) available • Life Guard seals are the industry standard on OEM equipment • Weight: 19 lbs./8.6 kg Order Information Model Number 9213P Max GPM 91 Max LPM 344 Max PSI 65 Max BAR 4.5 Max RPM 3600 PTO Output 3⁄4" hollow keyed stainless steel shaft for direct coupling to 5hp engine 3430-0333 Seal and o-ring repair kit 3430-0590 Life Guard silicon carbide seal kit Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9213P-B) 9213P — Based on 5.5 HP HONDA® Engine GPM at 0 PSI 92 GPM at 10 PSI 91 GPM at 20 PSI 88 GPM at 30 PSI 81 GPM at 40 PSI 70 U.S. Units GPM at 50 PSI 58 9213P — Based on 5.5 HP HONDA® Engine GPM at 60 PSI 42 LPM at 0.0 BAR 348 Honda® is a registered trademark of Honda Motor Co., Ltd. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair ltd. 23 LPM at 0.7 BAR 344 LPM at 1.4 BAR 333 LPM at 2.1 BAR 307 LPM at 2.8 BAR 265 Metric Units LPM at 3.4 BAR 220 LPM at 4.1 BAR 159 Pedestal Mount, Clutch-Driven, Polypropylene Series 9260P Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Pedestal mount with DC clutch drive • Port sizes: 1-1⁄2" NPT inlet, 1-1⁄4" NPT outlet • Max. fluid temperature: 140°F/60°C • Housing: Polypropylene • Impeller: Polypropylene • Pump shaft rotation: Counter clockwise 9260P, when looking at the shaft end; 9260P-R is clockwise • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide (B) available • Life Guard seals are the industry standard on OEM equipment • Clutch: 12 volt with 5-1⁄2” (140 mm) diameter A-section pulley (part # 2526-0011) • Weight: 19 lbs./8.6 kg Order Information 9260P Max GPM 100 Max LPM 379 Max PSI 82 Max BAR 5.7 9260P-R 100 379 82 5.7 Model Number 3430-0333 Seal and o-ring repair kit 3430-0590 Life Guard silicon carbide seal kit Max RPM Rotation 4200 CCW 4200 CW Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9260P-B) 9260P, 9260P-R RPM 10 PSI GPM HP 20 PSI GPM HP 30 PSI GPM HP 40 PSI GPM HP 50 PSI GPM HP 60 PSI GPM HP 2400 55 1.5 49 1.4 32 1.1 3600 89 4.4 87 4.3 81 4.1 71 3.9 58 3.6 37 3.1 4200 100 6.7 100 6.6 97 6.5 90 6.3 82 6.0 71 5.7 9260P, 9260P-R RPM 0.7 BAR LPM HP 1.4 BAR LPM HP 2.1 BAR LPM HP 2.8 BAR LPM HP 3.4 BAR LPM HP 4.1 BAR LPM HP 2400 208 1.5 185 1.4 121 1.1 3600 337 4.4 329 4.3 307 4.1 269 3.9 220 3.6 140 3.1 4200 379 6.7 379 6.6 367 6.5 341 6.3 310 6.0 269 5.7 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 24 70 PSI GPM HP 60 5.2 U.S. Units 80 PSI GPM HP 39 4.4 Metric Units 4.8 BAR LPM HP 5.5 BAR LPM HP 227 148 5.2 4.4 Series 9262C-C and 9262S-C Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard • Extend pump life with Stainess Steel – Fact: Chemical corrosion, pump cavitation, and abrasive wear are key factors in pump life – 316 Stainless Steel pumps provide superior chemical corrosion resistance, while maintaining material strength to prolong the life against abrasive wear – 316 Stainless Steel resists cavitation pitting of pumps, extending the wear life – Drop in replacements for cast iron pumps Features • Pump shaft rotation: Counter clockwise when looking at the shaft end; Clockwise for -CR models • Pedestal mount with DC clutch drive • Double “A” groove pulley (5”/125 mm diameter) • Port sizes: 1-1/4" NPT inlet, 1” NPT outlet • Max. fluid temperature: 140°F/60°C • Available in cast iron and 316 stainless steel for extended pump life • Impeller: Nylon (standard in cast iron); polypropylene (standard in stainless steel); GTX available • Pump seals: Cast Iron models – Viton®/ceramic standard; Life Guard silicon carbide (B) available; Stainless Steel models – Life Guard silicon carbide standard • Life Guard seals are the industry standard on OEM equipment • Amp draw: 45 watts at 12 volts • Weight: 23 lbs./10.5 kg Order Information Max GPM 88 145 145 Model Number 9262C-C 9262S-C 9262S-CR 3430-0332 3430-0589 Max LPM 333 549 549 Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9262C-CB) Max Max PSI PSI 114 7.9 114 7.9 114 7.9 Seal and o-ring repair kit Life Guard silicon carbide seal kit Max RPM Rotation 5000 5000 5000 CCW* CCW* CW* *CCW (counterclockwise) CW (clockwise) are determined when looking at the shaft end. 9262C-C RPM 2400 3600 4200 5000 U.S. Units GPM 50 67 75 88 9262C-C RPM 2400 3600 4200 5000 LPM 189 254 284 333 10 PSI 0.7 BAR HP 1.3 3.7 5.7 9.3 GPM 46 66 75 88 HP 1.3 3.7 5.7 9.3 LPM 174 250 284 333 9262S-C, 9262S-CR RPM 2400 3600 4200 5000 GPM 73 112 128 145 10 PSI HP 1.4 4.5 7.1 11.8 GPM 55 109 127 145 20 PSI 1.4 BAR 20 PSI HP 1.2 3.7 5.7 9.3 HP 1.2 3.7 5.7 9.3 HP 1.2 4.5 7.1 11.8 GPM 40 PSI 62 75 88 LPM 2.8 BAR 235 284 333 GPM 40 PSI 86 116 143 HP GPM 3.5 5.7 9.3 25 66 88 HP LPM 3.5 5.7 9.3 95 250 333 HP GPM 4.0 6.8 11.7 25 92 133 60 PSI 4.1 BAR 60 PSI HP GPM 2.8 5.3 9.3 40 77 HP LPM 2.8 5.3 9.3 151 291 HP GPM 2.8 6.1 11.3 40 115 80 PSI 5.5 BAR 80 PSI HP GPM 4.6 8.6 60 RPM HP 1.4 4.5 7.1 11.8 LPM 208 413 481 549 326 439 541 4.0 6.8 11.7 95 348 503 Viton is a registered trademark of DuPont. Hypro is a registered trademark of Pentair. 25 ® HP 1.2 4.5 7.1 11.8 LPM 2.8 BAR LPM ® LPM 276 424 484 549 7.5 HP LPM 4.6 8.6 227 6.9 BAR HP 7.5 U.S. Units HP GPM 4.6 10.4 86 100 PSI HP 9.1 Metric Units 1.4 BAR HP 2400 3600 4200 5000 HP Metric Units 9262S-C, 9262S-CR 0.7 BAR 100 PSI 4.1 BAR HP LPM 2.8 6.1 11.3 151 435 5.5 BAR HP LPM 4.6 10.4 326 6.9 BAR HP 9.1 CENTRIFUGAL PUMPS Pedestal Mount, Clutch-Driven, Cast Iron & Stainless Steel Pedestal Mount, Clutch-Driven, Cast Iron & Stainless Steel, Self-Priming Series 9263C-SP and 9263S-SP Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard • Extend pump life with Stainess Steel – Fact: Chemical corrosion, pump cavitation, and abrasive wear are key factors in pump life – 316 Stainless Steel pumps provide superior chemical corrosion resistance, while maintaining material strength to prolong the life against abrasive wear – 316 Stainless Steel resists cavitation pitting of pumps, extending the wear life – Drop in replacements for cast iron pumps Features • Available in cast iron and 316 stainless steel for extended pump life • Pump seals: Cast Iron models - Viton®/ceramic standard; Life Guard silicon carbide (B) available; Stainless Steel models - Life Guard silicon carbide standard • Double “A” groove pulley (5”/125 mm diameter) • Life Guard seals are the industry standard on OEM equipment • Pedestal mount with DC clutch drive • Amp draw: 45 watts at 12 volts • Max fluid temperature: 140º F/60º C • Impeller: Nylon (standard in cast iron); polypropylene (standard in stainless steel); GTX available Order Information 9263C-CR-SP Max GPM 127 Max LPM 481 Max PSI 110 Max BAR 7.6 9263C-CR-SP-B 127 481 110 7.6 9263C-C-SP 120 454 110 9263S-C-SP 120 454 110 Model Number Max RPM Rotation Port Sizes 5000 CW* 2" NPT inlet x 2" NPT outlet 5000 CW* 2" NPT inlet x 2" NPT outlet 7.6 5000 CCW* 1-1/2" NPT inlet x 1-1/4" NPT outlet 7.6 5000 CCW* 1-1/2" NPT inlet x 1-1/4" NPT outlet 3430-0332 Seal and o-ring repair kit 3430-0589 Life Guard silicon carbide seal kit Life Guard silicon carbide seal - Add suffix "B" (i.e.: 9263-CR-SP-B) *CCW (counterclockwise) CW (clockwise) are determined when looking at the shaft end. 9263C-CR-SP, 9263C-CR-SP-B RPM 3600 4200 5000 20 PSI GPM HP 80 3.8 102 6.1 127 10.5 30 PSI GPM HP 64 3.4 90 5.8 119 10.2 U.S. Units 40 PSI GPM HP 43 2.9 76 5.4 109 9.8 50 PSI GPM HP 17 2.6 59 4.7 99 9.3 60 PSI GPM HP 2.8 BAR LPM HP 163 2.9 288 5.4 413 9.8 3.4 BAR LPM HP 64 2.6 223 4.7 375 9.3 4.1 BAR LPM HP 4.8 BAR LPM HP 5.5 BAR LPM HP 6.2 BAR LPM HP 144 326 61 265 208 140 40 PSI GPM HP 60 3.4 97 6.1 119 10.3 50 PSI GPM HP 25 2.6 79 5.5 117 10.2 60 PSI GPM HP 38 86 4.0 8.7 70 PSI GPM HP 16 70 3.7 7.9 80 PSI GPM HP 55 7.2 90 PSI GPM HP 37 6.2 9263C-CR-SP, 9263C-CR-SP-B RPM 3600 4200 5000 1.4 BAR LPM HP 303 3.8 386 6.1 481 10.5 2.1 BAR LPM HP 242 3.4 341 5.8 450 10.2 3600 4200 5000 20 PSI GPM HP 101 4.2 118 6.7 120 10.1 30 PSI GPM HP 84 3.9 112 6.7 120 10.3 4.0 8.7 3.7 7.9 7.2 6.2 3600 4200 5000 1.4 BAR LPM HP 382 4.2 447 6.7 454 10.1 2.1 BAR LPM HP 318 3.9 424 6.7 454 10.3 5.4 6.9 BAR LPM HP 68 5.4 U.S. Units 54 110 4.7 10.1 70 PSI GPM HP 23 96 4.0 9.6 80 PSI GPM HP 78 8.7 90 PSI GPM HP 52 7.2 9263C-C-SP, 9263S-C-SP RPM 18 Metric Units 9263C-C-SP, 9263S-C-SP RPM 100 PSI GPM HP 100 PSI GPM HP 25 5.8 Metric Units 2.8 BAR LPM HP 227 3.4 367 6.1 450 10.3 3.4 BAR LPM HP 95 2.6 299 5.5 443 10.2 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 4.1 BAR LPM HP 4.8 BAR LPM HP 5.5 BAR LPM HP 6.2 BAR LPM HP 204 416 87 363 295 197 26 4.7 10.1 4.0 9.6 8.7 7.2 6.9 BAR LPM HP 95 5.8 Series 9263C-C and 9263S-C Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard • Extend pump life with Stainess Steel – Fact: Chemical corrosion, pump cavitation, and abrasive wear are key factors in pump life – 316 Stainless Steel pumps provide superior chemical corrosion resistance, while maintaining material strength to prolong the life against abrasive wear – 316 Stainless Steel resists cavitation pitting of pumps, extending the wear life – Drop in replacements for cast iron pumps Features • Available in cast iron and 316 stainless steel for extended pump life For Flanged Connections You Will Also Need: Universal Flange Gasket Universal Flange Clamp • Pedestal mount with DC clutch drive • Double “A” groove pulley (5“/125 mm diameter) • Port sizes: 1-1/2" NPT inlet, 1-1/4" NPT outlet (BSP available on 9263C) See page 252 for details • 220 x 200 universal flange available (U) • Stainless steel models now available with universal flanges • Max. fluid temperature: 140°F/60°C • Impeller: Nylon (standard in cast iron); polypropylene (standard in stainless steel); GTX available • Pump seals: Cast Iron models – Viton®/ceramic standard; Life Guard silicon carbide (B) available; Stainless Steel models – Life Guard silicon carbide standard • Life Guard seals are the industry standard on OEM equipment • Amp draw: 45 watts at 12 volts • Weight: 23 lbs./10.5 kg Order Information Max GPM 140 140 140 140 Model Number 9263C-C † (BSP Version - 9263C-BT) 9263C-CR 9263S-C † 9263S-CR 3430-0332 3430-0589 Max LPM 530 530 530 530 Max Max PSI BAR 114 7.9 114 7.9 114 7.9 114 7.9 Seal and o-ring repair kit Life Guard silicon carbide seal kit † Universal Flange (220 x 200) - Add Suffix “U” (i.e.: 9263C-C-U) Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9263C-CB) *CCW (counterclockwise) CW (clockwise) are determined when looking at the shaft end. 9263C-C, 9263S-C, 9263C-CR, 9263S-CR, 9263C-C-U, 9263S-C-U RPM 2400 GPM 10 PSI 80 HP GPM 1.9 65 20 PSI HP GPM 40 PSI HP GPM 60 PSI HP GPM 80 PSI HP 105 5.3 105 5.3 92 5.0 50 3.7 122 8.2 120 7.9 115 7.7 98 7.1 56 5.3 5000 140 12.6 140 12.6 138 12.6 130 12.2 118 11.6 9263C-C, 9263S-C, 9263C-CR, 9263S-CR, 9263C-C-U, 9263S-C-U 2400 LPM 303 HP LPM 1.9 246 1.4 BAR HP LPM 2.8 BAR HP LPM 4.1 BAR HP LPM 5.5 BAR HP 88 9.9 HP LPM 6.9 BAR HP 1.8 3600 397 5.3 397 5.3 348 5.0 189 3.7 462 8.2 454 7.9 435 7.7 371 7.1 212 5.3 5000 530 12.6 530 12.6 522 12.6 492 12.2 447 11.6 Viton is a registered trademark of DuPont. Hypro is a registered trademark of Pentair. 27 ® GPM 100 PSI Metric Units 4200 ® CCW* CW* CCW* CW* 1.8 3600 RPM Rotation 5000 5000 5000 5000 U.S. Units 4200 0.7 BAR Max RPM 333 9.9 CENTRIFUGAL PUMPS Pedestal Mount, Clutch-Driven, Cast Iron & Stainless Steel Hydraulically-Driven, Cast Iron and Stainless Steel Series 9302C and 9302S Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard • Extend pump life with Stainess Steel – Fact: Chemical corrosion, pump cavitation, and abrasive wear are key factors in pump life – 316 Stainless Steel pumps provide superior chemical corrosion resistance, while maintaining material strength to prolong the life against abrasive wear – 316 Stainless Steel resists cavitation pitting of pumps, extending the wear life – Drop in replacements for cast iron pumps Features • Available in cast iron and 316 stainless steel for extended pump life • Hydraulic motor drive (for open center, closed center and load-sensing systems) • Port sizes: 1-1⁄4" NPT inlet, 1" NPT outlet • Max. fluid temperature: 140°F/60°C • Impeller: Cast Iron models – Nylon; Stainless Steel models – Polypropylene • Motor: internal gear gerotor • Hydraulic ports: 1⁄2" NPT inlet, 3⁄4" NPT outlet-HM Series • Hydraulic ports on GM1 Series: 7⁄8" 14 UNF #10 SAE • Pump seals: Cast Iron models – Viton®/ceramic standard; Life Guard silicon carbide (B) available; Stainless Steel models – Life Guard silicon carbide standard • Life Guard seals are the industry standard on OEM equipment • Hydraulic motor seal: double-lip Teflon® and case drain available • Max. motor psi: 3000 (bar: 207) • Weight: 26 lbs./11.8 kg Order Information 9302CT-GM1 Max GPM 63 Max LPM 238 Max PSI 90 Max BAR 6.2 9302C-HM1C 72 273 150 10.3 13 49.2 Open/Closed 9302C-HM2C 65 246 96 6.6 6 22.7 Open/Closed 9302C-HM4C 72 273 120 8.3 7 26.5 Open/Closed 9302ST-GM1 63 238 90 6.2 3 11.4 Open/Closed 9302S-HM1C 72 273 150 10.3 13 49.2 Open/Closed 9302S-HM2C 65 246 96 6.6 6 22.7 Open/Closed 9302S-HM4C 72 273 120 8.3 7 26.5 Open/Closed Model Number Max Hyd. Max Hyd. GPM LPM 3 11.4 3430-0332 Seal and o-ring repair kit 3430-0589 Life Guard silicon carbide seal kit Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9302CT-GM1-B) Teflon® is a registered trademark of E.I. DuPont de Nemours and Co. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 28 Hydraulic Selection System Open/Closed U.S. Units GPM at 20 PSI 48 GPM at 30 PSI 39 GPM at 40 PSI 21 GPM at 50 PSI GPM at 60 PSI 2.0 GPM at 10 PSI 51 2.5 60 59 56 48 37 23 3.0 63 63 62 61 58 7.6 LPM at 0.7 BAR 193 LPM at 1.4 BAR 182 LPM at 2.1 BAR 148 LPM at 2.8 BAR 79 LPM at 3.5 BAR 9.5 227 223 212 182 140 87 11.4 238 238 235 231 220 189 Hyd. Flow GPM GPM at 70 PSI GPM at 80 PSI GPM at 90 PSI 50 39 25 0 LPM at 4.2 BAR LPM at 4.9 BAR LPM at 5.6 BAR LPM at 6.3 BAR 148 95 0 9302CT-GM1, 9302ST-GM1 Hyd. Flow LPM Metric Units 9302C-HM1C, 9302S-HM1C Hyd. Flow GPM 11 GPM at 40 PSI 72 U.S. Units GPM at 50 PSI 72 GPM at 60 PSI 71 GPM at 70 PSI 65 GPM at 80 PSI 56 GPM at 90 PSI 45 GPM at 100 PSI 29 GPM at 110 PSI GPM at 120 PSI GPM at 130 PSI GPM at 140 PSI 35 12 72 72 72 72 70 63 53 40 13 72 72 72 72 72 71 68 63 56 48 LPM at 4.1 BAR 269 LPM at 4.8 BAR 246 LPM at 5.5 BAR 212 LPM at 6.2 BAR 170 LPM at 6.9 BAR 110 LPM at 7.6 BAR LPM at 8.3 BAR LPM at 9.0 BAR LPM at 9.7 BAR 212 182 132 9302C-HM1C, 9302S-HM1C Hyd. Flow LPM 41.6 LPM at 2.8 BAR 273 Metric Units LPM at 3.4 BAR 273 45.4 273 273 273 273 265 238 201 151 49.2 273 273 273 273 273 269 257 238 9302C-HM2C, 9302S-HM2C U.S. Units Hyd. Flow GPM 4 GPM at 10 PSI 54 GPM at 20 PSI 49 GPM at 30 PSI 42 GPM at 40 PSI 34 GPM at 50 PSI 19 GPM at 60 PSI GPM at 70 PSI GPM at 80 PSI GPM at 90 PSI 5 59 57 50 42 34 25 11 6 64 63 60 52 44 36 27 18 9 LPM at 4.1 BAR LPM at 4.8 BAR LPM at 5.5 BAR LPM at 6.2 BAR 68 34 9302C-HM2C, 9302S-HM2C Metric Units Hyd. Flow LPM 15.1 LPM at 0.7 BAR 204 LPM at 1.4 BAR 185 LPM at 2.1 BAR 159 LPM at 2.8 BAR 129 LPM at 3.4 BAR 72 18.9 223 216 189 159 129 95 42 22.7 244 238 227 197 167 136 102 9302C-HM4C, 9302S-HM4C Hyd. Flow GPM 6 GPM at 10 PSI 65 GPM at 20 PSI 63 U.S. Units GPM at 30 PSI 59 GPM at 40 PSI 51 GPM at 50 PSI 41 GPM at 60 PSI 29 GPM at 70 PSI 12 GPM at 80 PSI GPM at 90 PSI GPM at 100 PSI GPM at 110 PSI 16 7 72 72 71 67 60 51 42 31 17 8 72 72 72 72 70 64 57 50 42 32 LPM at 2.1 BAR 223 LPM at 2.8 BAR 193 LPM at 3.4 BAR 155 LPM at 4.1 BAR 110 LPM at 4.8 BAR 45 LPM at 5.5 BAR LPM at 6.2 BAR LPM at 6.9 BAR LPM at 7.6 BAR 121 61 9302C-HM4C, 9302S-HM4C Hyd. Flow LPM 22.7 LPM at 0.7 BAR 246 LPM at 1.4 BAR 238 Metric Units 26.5 273 273 269 254 227 193 159 117 64 30.3 273 273 273 273 265 242 216 189 159 29 CENTRIFUGAL PUMPS 9302CT-GM1, 9302ST-GM1 Hydraulically-Driven, Cast Iron & Stainless Steel Series 9303C and 9303S Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard • Extend pump life with Stainess Steel – Fact: Chemical corrosion, pump cavitation, and abrasive wear are key factors in pump life – 316 Stainless Steel pumps provide superior chemical corrosion resistance, while maintaining material strength to prolong the life against abrasive wear – 316 Stainless Steel resists cavitation pitting of pumps, extending the wear life – Drop in replacements for cast iron pumps Features • Available in cast iron and 316 stainless steel for extended pump life • Hydraulic motor drive (for open center, closed center and load-sensing systems) • Port sizes: 1-1⁄2" NPT inlet, 1-1⁄4" NPT outlet For Flanged Connections You Will Also Need: Universal Flange Gasket Universal Flange Clamp • 220 x 200 universal flange available (U) See page 252 for details • Max. fluid temperature: 140°F/60°C • Impeller: Cast Iron models – Nylon; (GTX available) Stainless Steel models – Polypropylene • Motor: internal gear gerotor • Hydraulic ports: 1⁄2" NPT inlet, 3⁄4" NPT outlet • Pump seals: Cast Iron models – Viton®/ceramic standard; Life Guard silicon carbide (B) available; Stainless Steel models – Life Guard silicon carbide standard • Life Guard seals are the industry standard on OEM equipment • Hydraulic motor seal: double-lip Teflon® and case drain available • Max. motor psi: 3000 (bar: 207) • Stainless steel models now available with universal flanges • Weight: 26 lbs./11.8 kg Order Information 9303C-HM1C Max GPM 114 Max LPM 432) Max PSI 130 9303C-HM2C 97 367 95 6.5 6 22.7 Open/Closed 9303C-HM3C 125 473 98 6.8 24 90.8 Open/Closed 9303C-HM4C 115 435 93 6.4 7 26.5 Open/Closed 9303C-HM5C 147 556 145 10.0 16 60.6 Open/Closed 9303S-HM1C 114 432) 130 9.0 13 49.2 Open/Closed 9303S-HM2C 97 367 95 6.5 6 22.7 Open/Closed 9303S-HM3C 125 473 98 6.8 24 90.8 Open/Closed 9303S-HM4C 115 435 93 6.4 7 26.5 Open/Closed 9303S-HM5C 147 556 145 10.0 16 60.6 Open/Closed Model Number Max BAR 9.0 Max Hyd. Max Hyd. GPM LPM 13 49.2 3430-0332 Seal and o-ring repair kit 3430-0589 Life Guard silicon carbide seal kit Universal Flange (220 x 200) - Add suffix “U” (i.e.: 9303C-HM3C-U) Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9303C-HM1C-B) Teflon® is a registered trademark of E.I. DuPont de Nemours and Co. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 30 Hydraulic Selection System Open/Closed Hyd. Flow GPM 11 12 13 GPM at 20 PSI 104 110 112 U.S. Units GPM at 30 PSI 101 109 111 GPM at 40 PSI 96 107 109 GPM at 50 PSI 90 105 107 GPM at 60 PSI 82 101 104 GPM at 70 PSI 71 92 102 GPM at 80 PSI 60 81 96 GPM at 90 PSI 47 67 85 GPM at 100 PSI 31 53 76 GPM at 110 PSI GPM at 120 PSI 36 63 9 33 LPM at 2.8 BAR 363 405 413 LPM at 3.4 BAR 341 397 405 LPM at 4.1 BAR 310 382 394 LPM at 4.8 BAR 269 348 386 LPM at 5.5 BAR 227 307 363 LPM at 6.2 BAR 178 254 322 LPM at 6.9 BAR 117 201 288 LPM at 7.6 BAR LPM at 8.3 BAR 136 238 34 125 9303C-HM1C, 9303S-HM1C Hyd. Flow LPM 41.6 45.4 49.2 LPM at 1.4 BAR 394 416 424 Metric Units LPM at 2.1 BAR 382 413 420 9303C-HM2C, 9303S-HM2C Hyd. Flow GPM 4 5 6 U.S. Units GPM at 10 PSI 70 83 94 GPM at 20 PSI 60 74 86 GPM at 30 PSI 45 65 80 GPM at 40 PSI 25 50 72 GPM at 50 PSI GPM at 60 PSI GPM at 70 PSI GPM at 80 PSI GPM at 90 PSI 37 62 22 50 4 37 22 7 LPM at 1.4 BAR 227 280 326 LPM at 2.1 BAR 170 246 303 LPM at 2.8 BAR 95 189 273 LPM at 3.4 BAR LPM at 4.1 BAR LPM at 4.8 BAR LPM at 5.5 BAR LPM at 6.2 BAR 140 235 83 189 15 140 83 26 GPM at 20 PSI 92 114 123 GPM at 30 PSI 83 108 120 GPM at 40 PSI 69 100 114 GPM at 50 PSI 47 90 107 GPM at 60 PSI GPM at 70 PSI GPM at 80 PSI GPM at 90 PSI 76 96 55 85 33 71 50 LPM at 1.4 BAR 348 432 466 LPM at 2.1 BAR 314 409 454 LPM at 2.8 BAR 261 379 432 LPM at 3.4 BAR 178 341 405 LPM at 4.1 BAR LPM at 4.8 BAR LPM at 5.5 BAR LPM at 6.2 BAR 288 363 208 322 125 269 189 GPM at 20 PSI 76 92 104 GPM at 30 PSI 66 86 98 GPM at 40 PSI 52 78 91 GPM at 50 PSI 34 67 82 GPM at 60 PSI GPM at 70 PSI GPM at 80 PSI GPM at 90 PSI 50 69 25 55 38 14 LPM at 1.4 BAR 288 348 394 LPM at 2.1 BAR 250 326 371 LPM at 2.8 BAR 197 295 344 LPM at 3.4 BAR 129 254 310 LPM at 4.1 BAR LPM at 4.8 BAR LPM at 5.5 BAR LPM at 6.2 BAR 189 261 95 208 144 53 9303C-HM2C, 9303S-HM2C Hyd. Flow LPM 15.1 18.9 22.7 LPM at 0.7 BAR 265 314 356 Metric Units 9303C-HM3C, 9303S-HM3C Hyd. Flow GPM 15 18 20 U.S. Units GPM at 10 PSI 100 116 125 9303C-HM3C, 9303S-HM3C Hyd. Flow LPM 56.8 68.1 75.7 LPM at 0.7 BAR 379 439 473 Metric Units 9303C-HM4C, 9303S-HM4C Hyd. Flow GPM 5 6 7 U.S. Units GPM at 10 PSI 84 97 110 9303C-HM4C, 9303S-HM4C Hyd. Flow LPM 18.9 22.7 26.5 LPM at 0.7 BAR 318 367 416 Metric Units 9303C-HM5C, 9303S-HM5C Hyd. Flow GPM 13 14 15 16 GPM at 30 PSI 113 128 135 145 GPM at 40 PSI 105 123 132 142 9303C-HM5C, 9303S-HM5C Hyd. Flow LPM 49.2 53.0 56.8 60.6 LPM at 2.1 BAR 428 485 511 549 LPM at 2.8 BAR 397 466 500 538 U.S. Units GPM at 50 PSI 97 116 126 137 GPM at 60 PSI 86 108 119 132 GPM at 70 PSI 73 98 110 126 GPM at 80 PSI 59 88 100 117 GPM at 90 PSI 44 74 89 107 GPM at 100 PSI GPM at 110 PSI GPM at 120 PSI GPM at 130 PSI 61 77 95 44 66 83 50 70 20 55 LPM at 3.4 BAR 367 439 477 519 LPM at 4.1 BAR 326 409 450 500 LPM at 4.8 BAR 276 371 416 477 LPM at 5.5 BAR 223 333 379 443 LPM at 6.2 BAR 167 280 337 405 LPM at 6.9 BAR 31 231 291 360 LPM at 7.6 BAR 167 250 314 Metric Units LPM at 8.3 BAR 189 265 LPM at 9.0 BAR 76 208 CENTRIFUGAL PUMPS 9303C-HM1C, 9303S-HM1C Hydraulically-Driven, Cast Iron & Stainless Steel, Self-Priming Series 9303C-SP and 9303S-SP Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard • Extend pump life with Stainess Steel – Fact: Chemical corrosion, pump cavitation, and abrasive wear are key factors in pump life – 316 Stainless Steel pumps provide superior chemical corrosion resistance, while maintaining material strength to prolong the life against abrasive wear – 316 Stainless Steel resists cavitation pitting of pumps, extending the wear life – Drop in replacements for cast iron pumps Features • Available in cast iron and 316 stainless steel for extended pump life • Hydraulic motor drive (for open center, closed center and load-sensing systems) • Port sizes: 1-1⁄2" NPT inlet, 1-1⁄4" NPT outlet • Max. fluid temperature: 140°F/60°C • Impeller: Cast Iron models – Nylon; (GTX available) Stainless Steel models – Polypropylene • Motor: internal gear gerotor • Hydraulic ports: 1⁄2" NPT inlet, 3⁄4" NPT outlet • Max. motor psi: 3000 (bar: 207) • Pump seals: Cast Iron models – Viton®/ceramic standard; Life Guard silicon carbide (B) available; Stainless Steel models – Life Guard silicon carbide standard • Life Guard seals are the industry standard on OEM equipment • Hydraulic motor seal: double-lip Teflon® and case drain available • Weight: 38 lbs./17.3 kg Order Information 9303C-HM1C-SP Max GPM 122 Max LPM 462 Max PSI 130 9303C-HM2C-SP 104 398 80 5.5 6 22.7 Open/Closed 9303C-HM3C-SP 120 454 95 6.5 24 90.8 Open/Closed 9303C-HM4C-SP 99 375 97 6.7 7 26.5 Open/Closed 9303C-HM5C-SP 140 530 140 9.7 16 60.5 Open/Closed 9303S-HM1C-SP 114 432 130 9.0 13 49.2 Open/Closed 9303S-HM2C-SP 97 361 95 6.5 6 22.7 Open/Closed 9303S-HM3C-SP 125 473 98 6.8 20 75.7 Open/Closed 9303S-HM4C-SP 115 435 93 6.4 7 26.5 Open/Closed 9303S-HM5C-SP 147 556 145 9.9 16 60.5 Open/Closed Model Number Max BAR 9.0 Max Hyd. Max Hyd. GPM LPM 13 49.2 3430-0589 Life Guard silicon carbide seal kit 3430-0480SP Self priming chamber kit Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9303C-HM1C-SP-B) Teflon® is a registered trademark of E.I. DuPont de Nemours and Co. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 32 Hydraulic Selection System Open/Closed Hyd. Flow GPM 11 12 13 GPM at 10 PSI 119 122 122 GPM at 20 PSI 111 120 121 U.S. Units GPM at 30 PSI 102 113 119 GPM at 40 PSI 89 104 111 GPM at 50 PSI 75 94 102 GPM at 60 PSI 58 81 90 GPM at 70 PSI 42 69 78 GPM at 80 PSI 25 55 65 GPM at 90 PSI GPM at 100 PSI GPM at 110 PSI 39 52 24 39 26 LPM at 2.8 BAR 337 394 420 LPM at 3.4 BAR 284 356 386 LPM at 4.1 BAR 220 307 341 LPM at 4.8 BAR 159 261 295 LPM at 5.5 BAR 95 208 246 LPM at 6.2 BAR LPM at 6.9 BAR LPM at 7.6 BAR 148 197 91 148 98 9303C-HM1C-SP, 9303S-HM1C-SP Hyd. Flow LPM 41.6 45.4 49.2 LPM at 0.7 BAR 450 462 462 LPM at 1.4 BAR 420 454 458 Metric Units LPM at 2.1 BAR 386 428 450 9303C-HM2C-SP, 9303S-HM2C-SP U.S. Units Hyd. Flow GPM GPM at 10 PSI GPM at 20 PSI GPM at 30 PSI GPM at 40 PSI GPM at 50 PSI GPM at 60 PSI GPM at 70 PSI 4 5 6 57 80 98 43 67 88 26 53 78 39 67 23 55 42 29 9303C-HM2C-SP, 9303S-HM2C-SP Metric Units Hyd. Flow LPM LPM at 0.7 BAR LPM at 1.4 BAR LPM at 2.1 BAR LPM at 2.8 BAR LPM at 3.4 BAR LPM at 4.1 BAR LPM at 4.8 BAR 15.1 18.9 22.7 216 303 371 163 254 333 98 201 295 148 254 87 208 159 110 9303C-HM3C-SP, 9303S-HM3C-SP U.S. Units Hyd. Flow GPM GPM at 10 PSI GPM at 20 PSI GPM at 30 PSI GPM at 40 PSI GPM at 50 PSI GPM at 60 PSI GPM at 70 PSI GPM at 80 PSI 15 18 20 104 119 120 90 113 119 74 102 114 55 87 106 23 69 91 46 74 55 33 9303C-HM3C-SP, 9303S-HM3C-SP Metric Units Hyd. Flow LPM LPM at 0.7 BAR LPM at 1.4 BAR LPM at 2.1 BAR LPM at 2.8 BAR LPM at 3.4 BAR LPM at 4.1 BAR LPM at 4.8 BAR LPM at 5.5 BAR 56.8 68.1 75.7 394 450 454 341 428 450 280 386 432 208 329 401 87 261 344 174 280 208 125 9303C-HM4C-SP, 9303S-HM4C-SP U.S. Units Hyd. Flow GPM GPM at 10 PSI GPM at 20 PSI GPM at 30 PSI GPM at 40 PSI GPM at 50 PSI GPM at 60 PSI GPM at 70 PSI GPM at 80 PSI 5 6 7 72 87 95 60 79 91 46 66 84 30 52 71 15 38 58 27 42 13 30 16 9303C-HM4C-SP, 9303S-HM4C-SP Metric Units Hyd. Flow LPM LPM at 0.7 BAR LPM at 1.4 BAR LPM at 2.1 BAR LPM at 2.8 BAR LPM at 3.4 BAR LPM at 4.1 BAR LPM at 4.8 BAR LPM at 5.5 BAR 18.9 22.7 26.5 273 329 360 227 299 344 174 250 318 114 197 269 57 144 220 102 159 49 114 61 9303C-HM5C-SP, 9303S-HM5C-SP Hyd. Flow GPM 13 14 15 GPM at 10 PSI 114 118 122 GPM at 20 PSI 111 117 121 GPM at 30 PSI 102 113 119 GPM at 40 PSI 89 104 111 GPM at 50 PSI 75 94 102 9303C-HM5C-SP, 9303S-HM5C-SP Hyd. Flow LPM 49.2 53.0 56.8 LPM at 0.7 BAR 432 447 462 LPM at 1.4 BAR 420 443 458 LPM at 2.1 BAR 386 428 450 LPM at 2.8 BAR 337 394 420 LPM at 3.4 BAR 284 356 386 33 GPM at 60 PSI 58 81 90 GPM at 70 PSI 42 69 78 GPM at 80 PSI 25 55 65 GPM at 90 PSI GPM at 100 PSI 39 52 24 39 LPM at 4.1 BAR 220 307 341 LPM at 4.8 BAR 159 261 295 LPM at 5.5 BAR 95 208 246 LPM at 6.2 BAR LPM at 6.9 BAR 148 197 91 148 U.S. Units GPM at 110 PSI 26 Metric Units LPM at 7.6 BAR 98 CENTRIFUGAL PUMPS 9303C-HM1C-SP, 9303S-HM1C-SP Hydraulically-Driven, Polyproplene Series 9303P Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Hydraulic motor drive (for open center, closed center and load-sensing systems) • Port sizes: 1-1⁄2" NPT inlet, 1-1⁄4" NPT outlet • Max. fluid temperature: 140°F/60°C • Housing: Polypropylene • Impeller: Polypropylene • Motor: internal gear gerotor • Hydraulic ports: 1⁄2" NPT inlet, 3⁄4" NPT outlet • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide (B) available • Life Guard seals are the industry standard on OEM equipment • Hydraulic motor seal: double-lip Teflon® and case drain available • Max. motor psi: 3000 (bar: 207) • Weight: 21 lbs./9.5 kg Order Information Model Number 9303P-HM1C 9303P-HM2C 9303P-HM3C 9303P-HM4C 9303P-HM5C 3430-0445 3430-0593 Max GPM 110 82 110 82 113 Max LPM 416 310 416 310 427 Max PSI 130 95 93 84 120 Max BAR 9.0 6.5 6.4 5.3 8.3 Max Hyd. Max Hyd. Hydraulic Selection System GPM LPM 13 49.2 Open/Closed 6 22.7 Open/Closed 24 90.8 Open/Closed 7 26.5 Open/Closed 16 60.5 Open/Closed Seal and o-ring repair kit Life Guard silicon carbide seal kit Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9303P-HM1C-B) Teflon® is a registered trademark of E.I. DuPont de Nemours and Co. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 34 Hyd. Flow GPM 11 12 13 U.S. Units GPM at 20 PSI 90 99 106 GPM at 30 PSI 86 95 103 GPM at 40 PSI 80 91 99 GPM at 50 PSI 74 87 94 GPM at 60 PSI 67 81 88 GPM at 70 PSI 59 74 82 GPM at 80 PSI 49 66 74 GPM at 90 PSI 36 55 65 GPM at 100 PSI 18 39 54 GPM at 110 PSI GPM at 120 PSI 19 42 28 LPM at 1.4 BAR 341 375 401 LPM at 2.1 BAR 326 360 390 LPM at 2.8 BAR 303 344 375 LPM at 3.4 BAR 280 329 356 LPM at 4.1 BAR 254 307 333 LPM at 4.8 BAR 223 280 310 LPM at 5.5 BAR 185 250 280 LPM at 6.2 BAR 136 208 246 LPM at 6.9 BAR 68 148 204 LPM at 7.6 BAR LPM at 8.3 BAR 72 159 106 GPM at 10 PSI 93 102 109 9303P-HM1C Hyd. Flow LPM 41.6 45.4 49.2 Metric Units LPM at 0.7 BAR 352 386 413 9303P-HM2C Hyd. Flow GPM 5 6 7 9303P-HM2C Hyd. Flow LPM 18.9 22.7 26.5 GPM at 20 PSI 56 72 75 GPM at 30 PSI 46 64 70 GPM at 40 PSI 38 56 62 GPM at 50 PSI 20 48 57 GPM at 60 PSI GPM at 70 PSI GPM at 80 PSI 38 48 21 40 28 LPM at 0.7 BAR 246 280 303 LPM at 1.4 BAR 212 273 284 LPM at 2.1 BAR 174 242 265 LPM at 2.8 BAR 144 212 235 LPM at 3.4 BAR 76 182 216 LPM at 4.1 BAR LPM at 4.8 BAR LPM at 5.5 BAR 144 182 79 151 106 GPM at 10 PSI 85 100 109 GPM at 20 PSI 80 97 108 GPM at 30 PSI 70 92 104 GPM at 40 PSI 60 84 99 GPM at 50 PSI 44 76 90 GPM at 60 PSI GPM at 70 PSI GPM at 80 PSI GPM at 90 PSI 63 82 48 71 60 39 LPM at 0.7 BAR 322 379 413 LPM at 1.4 BAR 303 367 409 LPM at 2.1 BAR 265 348 394 LPM at 2.8 BAR 227 318 375 LPM at 3.4 BAR 167 288 341 LPM at 4.1 BAR LPM at 4.8 BAR LPM at 5.5 BAR LPM at 6.2 BAR 238 310 182 269 227 148 Metric Units LPM at 6.2 BAR 34 U.S. Units 9303P-HM3C Hyd. Flow LPM 56.8 68.1 75.7 GPM at 90 PSI 9 9303P-HM3C Hyd. Flow GPM 15 18 20 U.S. Units GPM at 10 PSI 65 74 80 Metric Units 9303P-HM4C U.S. Units Hyd. Flow GPM GPM at 10 PSI GPM at 20 PSI GPM at 30 PSI GPM at 40 PSI GPM at 50 PSI GPM at 60 PSI GPM at 70 PSI GPM at 80 PSI 5 6 7 60 70 80 52 66 76 41 58 70 26 48 63 37 55 21 45 32 15 9303P-HM4C Metric Units Hyd. Flow LPM LPM at 0.7 BAR LPM at 1.4 BAR LPM at 2.1 BAR LPM at 2.8 BAR LPM at 3.4 BAR LPM at 4.1 BAR LPM at 4.8 BAR LPM at 5.5 BAR 18.9 22.7 26.5 227 265 303 197 250 288 155 220 265 98 182 238 140 208 79 170 121 57 9303P-HM5C Hyd. Flow GPM 12 13 14 15 GPM at 10 PSI 94 100 108 113 U.S. Units GPM at 20 PSI 92 98 107 112 GPM at 30 PSI 86 94 104 110 GPM at 40 PSI 78 88 100 106 GPM at 50 PSI 68 79 94 100 GPM at 60 PSI 58 70 86 93 GPM at 70 PSI 44 60 77 86 GPM at 80 PSI 15 48 68 78 GPM at 90 PSI GPM at 100 PSI GPM at 110 PSI 25 57 68 42 56 40 LPM at 1.4 BAR 348 371 405 424 LPM at 2.1 BAR 326 356 394 416 LPM at 2.8 BAR 295 333 379 401 LPM at 3.4 BAR 257 299 356 379 LPM at 4.1 BAR 220 265 326 352 LPM at 4.8 BAR 167 227 291 326 LPM at 5.5 BAR 57 182 257 295 LPM at 6.2 BAR LPM at 6.9 BAR LPM at 7.6 BAR 95 216 257 159 212 151 9303P-HM5C Hyd. Flow LPM 45.4 49.2 53.0 56.8 LPM at 0.7 BAR 356 379 409 428 Metric Units 35 CENTRIFUGAL PUMPS 9303P-HM1C Hydraulically-Driven, Cast Iron Series 9305C Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Available in cast iron • Hydraulic motor drive (for open center, closed center and load-sensing systems) • Port sizes: 2" NPT inlet, 1-1⁄2" NPT outlet • Max. fluid temperature: 140°F/60°C • Impeller: Nylon • Motor: internal gear gerotor • Hydraulic ports: 1⁄2" NPT inlet, 3⁄4" NPT outlet • Max. motor psi: 3000 (bar: 207) • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide (B) available • Life Guard seals are the industry standard on OEM equipment • Hydraulic motor seal: double-lip Teflon® and case drain available • Weight: 48 lbs./21.8 kg Order Information Model Number 9305C-HM3C Max GPM 182 Max LPM 689 Max PSI 156 Max BAR 10.8 Max Hyd. Max Hyd. GPM LPM 19 72 Hydraulic Selection System Open/Closed 3430-0500 Seal and o-ring repair kit 3430-0601 Life Guard silicon carbide seal kit Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9305C-HM3C-B) 9305C-HM3C Hyd. Flow GPM 17 GPM at 50 PSI 173 GPM at 60 PSI 164 GPM at 70 PSI 148 GPM at 80 PSI 127 GPM at 90 PSI 97 U.S. Units GPM at 100 PSI 70 GPM at 110 PSI 44 GPM at 120 PSI 14 GPM at 130 PSI 18 177 175 168 154 135 109 87 62 34 19 180 179 177 167 151 134 115 95 72 LPM at 6.9 BAR 265 LPM at 7.6 BAR 167 LPM at 8.3 BAR 53 LPM at 9.0 BAR 9305C-HM3C Hyd. Flow LPM 64.4 LPM at 3.4 BAR 655 LPM at 4.1 BAR 621 LPM at 4.8 BAR 560 LPM at 5.5 BAR 481 LPM at 6.2 BAR 367 68.1 670 662 636 583 511 413 329 235 129 685 678 670 632 572 507 435 360 273 36 44 Metric Units 71.9 Teflon® is a registered trademark of E.I. DuPont de Nemours and Co. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. GPM at 140 PSI LPM at 9.7 BAR 167 CENTRIFUGAL PUMPS Hydraulically-Driven, Cast Iron, Self-Priming Series 9305C-SP and 9305C-BSP Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Available in cast iron • Hydraulic motor drive (for open center, closed center and load-sensing systems) • Port sizes: 2" NPT inlet, 2" NPT outlet (Model 9305C-HM3C-SP), 2" BSP inlet, 2" BSP outlet (Model 9305C-HM3C-BSP) • Max. fluid temperature: 140°F/60°C • Impeller: Nylon • Motor: internal gear gerotor • Hydraulic ports: 1⁄2" NPT inlet, 3⁄4" NPT outlet • Max. motor psi: 3000 (bar: 207) • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide (B) available • Life Guard seals are the industry standard on OEM equipment • Hydraulic motor seal: double-lip Teflon® and case drain available • Weight: 59 lbs./26.8 kg Order Information 9305C-HM3C-SP Max GPM 155 Max LPM 587 Max PSI 143 Max BAR 9.9 9305C-HM3C-BSP 155 587 143 9.9 Model Number Max Hyd. Max Hyd GPM LPM 19 72 19 Hydraulic Selection System Open/Closed 72 Open/Closed 3430-0601 Life Guard silicon carbide seal kit 3430-0481SP Self priming chamber kit Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9305C-HM3C-B-SP) 9305C-HM3C-SP, 9305C-HM3C-BSP Hyd. Flow GPM 17 GPM at 30 PSI 148 GPM at 40 PSI 145 GPM at 50 PSI 135 GPM at 60 PSI 118 GPM at 70 PSI 100 U.S. Units GPM at 80 PSI 81 GPM at 90 PSI 60 GPM at 100 PSI 37 GPM at 110 PSI 17 GPM at 120 PSI 18 150 149 147 138 120 102 81 60 38 14 19 153 152 150 147 140 120 104 85 66 45 LPM at 5.5 BAR 307 LPM at 6.2 BAR 227 LPM at 6.9 BAR 140 LPM at 7.6 BAR 64 LPM at 8.3 BAR 9305C-HM3C-SP, 9305C-HM3C-BSP Hyd. Flow LPM 64.4 LPM at 2.1 BAR 560 LPM at 2.8 BAR 549 LPM at 3.4 BAR 511 LPM at 4.1 BAR 447 LPM at 4.8 BAR 379 68.1 568 564 556 522 454 386 307 227 144 53 579 575 568 556 553 454 394 322 250 170 37 28 Metric Units 71.9 Teflon® is a registered trademark of E.I. DuPont de Nemours and Co. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. GPM at 130 PSI LPM at 9.0 BAR 106 Hydraulically-Driven, Cast Iron & Stainless Steel Series 9306C and 9306S Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard • Extend pump life with Stainess Steel – Fact: Chemical corrosion, pump cavitation, and abrasive wear are key factors in pump life – 316 Stainless Steel pumps provide superior chemical corrosion resistance, while maintaining material strength to prolong the life against abrasive wear – 316 Stainless Steel resists cavitation pitting of pumps, extending the wear life – Drop in replacements for cast iron pumps Features • Max. motor psi: 3000 (bar: 207) • Hydraulic motor drive (for open center, closed center and load-sensing systems) • Port sizes: 2" NPT inlet, 1-1⁄2" NPT outlet; 220 x 220 (U) Universal flange available • Max. fluid temperature: 140°F/60°C • Available in cast iron and 316 stainless steel for extended pump life • Impeller: Nylon (cast iron models); polypropylene (stainless steel models); (GTX available) • Motor: internal gear gerotor • Hydraulic ports: 1⁄2" NPT inlet, 3⁄4" NPT outlet • Pump seals: Cast Iron models – Viton®/ceramic standard; Life Guard silicon carbide (B) available; Stainless Steel models – Life Guard silicon carbide standard • Life Guard seals are the industry standard on OEM equipment • Hydraulic motor seal: double-lip Teflon® and case drain available • Weight: 33 lbs./15 kg For Flanged Connections You Will Also Need: Universal Flange Gasket Universal Flange Clamp See page 252 for details Order Information Model Number 9306C-HM1C* 9306C-HM3C* 9306C-HM5C* 9306S-HM1C 9306S-HM3C 9306S-HM5C 3430-0332 3430-0589 Max GPM 207 214 212 207 214 212 Max LPM 784 810 803 784 810 803 Max PSI 127 128 140 127 128 140 Max BAR 8.8 8.8 9.6 8.8 8.8 9.6 Max Hyd. Max Hyd. Hydraulic Selection System GPM LPM 13 49.2 Open/Closed 24 90.8 Open/Closed 17 64.4 Open/Closed 13 49.2 Open/Closed 24 90.8 Open/Closed 17 64.4 Open/Closed Seal and o-ring repair kit Life Guard silicon carbide seal kit *Universal Flange (220 x 220) - Add Suffix “U” (i.e.: 9306C-HM3C-U) - Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9306C-HM3C-B) 9306C-HM1C, 9306S-HM1C, 9306C-HM1C-U, 9306S-HM1C-U Hyd. Flow GPM 11 12 13 GPM at 30 PSI 207 207 207 GPM at 40 PSI 200 207 207 GPM at 50 PSI 186 196 207 GPM at 60 PSI 155 179 195 GPM at 70 PSI 122 149 171 GPM at 80 PSI 88 119 144 GPM at 90 PSI 44 88 115 GPM at 100 PSI GPM at 110 PSI 53 85 53 Hyd. Flow LPM 41.6 45.4 49.2 LPM at 2.1 BAR 784 784 784 LPM at 2.8 BAR 757 784 784 LPM at 3.4 BAR 704 742 784 LPM at 4.1 BAR 587 678 738 LPM at 4.8 BAR 462 564 647 LPM at 5.5 BAR 333 450 545 LPM at 6.2 BAR 167 333 435 LPM at 6.9 BAR LPM at 7.6 BAR 201 322 201 9306C-HM1C, 9306S-HM1C, 9306C-HM1C-U, 9306S-HM1C-U 9306C-HM3C, 9306S-HM3C, 9306C-HM3C-U, 9306S-HM3C-U Hyd. Flow GPM 18 20 22 24 GPM at 40 PSI 190 214 214 214 GPM at 50 PSI 179 203 214 214 GPM at 60 PSI 159 199 214 214 GPM at 70 PSI 90 181 210 214 GPM at 80 PSI GPM at 90 PSI GPM at 100 PSI GPM at 110 PSI 139 198 214 49 176 210 127 190 16 154 LPM at 2.8 BAR 719 810 810 810 LPM at 3.4 BAR 678 768 810 810 LPM at 4.1 BAR 602 753 810 810 LPM at 4.8 BAR 341 685 795 810 LPM at 5.5 BAR LPM at 6.2 BAR LPM at 6.9 BAR LPM at 7.6 BAR 526 750 810 185 666 795 481 719 61 583 9306C-HM3C, 9306S-HM3C, 9306C-HM3C-U, 9306S-HM3C-U Hyd. Flow LPM 68.1 75.7 83.3 90.8 9306C-HM5C, 9306S-HM5C, 9306C-HM5C-U, 9306S-HM5C-U Hyd. Flow GPM 15 16 17 GPM at 40 PSI 212 212 212 GPM at 50 PSI 212 212 212 GPM at 60 PSI 212 212 212 GPM at 70 PSI 187 212 212 GPM at 80 PSI 150 189 212 GPM at 90 PSI 114 158 189 GPM at 100 PSI 65 125 162 GPM at 110 PSI 19 87 133 GPM at 120 PSI Hyd. Flow LPM 56.8 60.6 64.4 LPM at 2.8 BAR 803 803 803 LPM at 3.4 BAR 803 803 803 LPM at 4.1 BAR 803 803 803 LPM at 4.8 BAR 708 803 803 LPM at 5.5 BAR 568 715 803 LPM at 6.2 BAR 432 598 715 LPM at 6.9 BAR 246 473 613 LPM at 7.6 BAR 72 329 503 LPM at 8.3 BAR 9306C-HM5C, 9306S-HM5C, 9306C-HM5C-U, 9306S-HM5C-U Teflon is a registered trademark of E.I. DuPont de Nemours and Co. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. ® 38 42 102 159 386 U.S. Units GPM at 120 PSI 20 Metric Units LPM at 8.3 BAR 76 U.S. Units GPM at 120 PSI 101 Metric Units LPM at 8.3 BAR 382 U.S. Units GPM at 130 PSI 58 Metric Units LPM at 9.0 BAR 220 Series 9306C-3U and 9306S-3U Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard • Extend pump life with Stainess Steel – Fact: Chemical corrosion, pump cavitation, and abrasive wear are key factors in pump life – 316 Stainless Steel pumps provide superior chemical corrosion resistance, while maintaining material strength to prolong the life against abrasive wear – 316 Stainless Steel resists cavitation pitting of pumps, extending the wear life – Drop in replacements for cast iron pumps Features • Hydraulic motor drive (for open center, closed center and load-sensing systems) • Port Sizes: 300 x 220 (3U) Universal flange • Max. fluid temperature: 140°F/60°C • Available in cast iron and 316 stainless steel for extended pump life • Impeller: Nylon (cast iron models); polypropylene (stainless steel models); (GTX available) • Motor: internal gear gerotor • Hydraulic ports: 1⁄2" NPT inlet, 3⁄4" NPT outlet Order Information Model Number 9306C-HM1C-3U 9306C-HM3C-3U 9306C-HM5C-3U 9306S-HM1C-3U 9306S-HM3C-3U 9306S-HM5C-3U 3430-0332 3430-0589 • Max. motor psi: 3000 (bar: 207) • Pump seals: Cast Iron models – Viton®/ceramic standard; Life Guard silicon carbide (B) available; Stainless Steel models – Life Guard silicon carbide • Life Guard seals are the industry standard on OEM equipment • Hydraulic motor seal: double-lip Teflon® and case drain available • Weight: 33 lbs./15 kg For Flanged Connections You Will Also Need: Universal Flange Gasket Universal Flange Clamp See page 252 for details Max GPM 283 322 312 283 322 312 Max LPM 1071 1219 1181 1071 1219 1181 Max PSI 127 128 140 127 128 140 Max BAR 8.8 8.8 9.6 8.8 8.8 9.6 Max Hyd. Max Hyd. Hydraulic Selection System GPM LPM 13 49.2 Open/Closed 24 90.3 Open/Closed 17 64.4 Open/Closed 13 49.2 Open/Closed 24 90.3 Open/Closed 17 64.4 Open/Closed Seal and o-ring repair kit Life Guard silicon carbide seal kit Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9306C-HM1C-B3U) 9306C-HM1C-3U, 9306S-HM1C-3U Hyd. Flow GPM 11 12 13 GPM at 30 PSI 255 271 283 GPM at 40 PSI 225 242 258 GPM at 50 PSI 190 211 226 GPM at 60 PSI 155 179 199 GPM at 70 PSI 122 149 171 GPM at 80 PSI 88 119 144 GPM at 90 PSI 44 88 115 GPM at 100 PSI 5 53 85 GPM at 110 PSI Hyd. Flow LPM 41.6 45.4 49.2 LPM at 2.1 BAR 965 1026 1071 LPM at 2.8 BAR 852 916 977 LPM at 3.4 BAR 719 799 856 LPM at 4.1 BAR 587 678 753 LPM at 4.8 BAR 462 564 647 LPM at 5.5 BAR 333 450 545 LPM at 6.2 BAR 167 333 435 LPM at 6.9 BAR 19 201 322 LPM at 7.6 BAR Hyd. Flow GPM 18 20 22 24 GPM at 30 PSI 285 308 312 322 GPM at 40 PSI 256 297 312 322 GPM at 50 PSI 213 268 308 320 GPM at 60 PSI 165 233 288 316 GPM at 70 PSI 90 192 255 298 GPM at 80 PSI GPM at 90 PSI GPM at 100 PSI GPM at 110 PSI 139 219 265 49 176 231 127 196 16 154 Hyd. Flow LPM 68.1 75.7 83.3 90.8 LPM at 2.1 BAR 1079 1166 1181 1219 LPM at 2.8 BAR 969 1124 1181 1219 LPM at 3.4 BAR 806 1014 1166 1211 LPM at 4.1 BAR 624 882 1090 1196 LPM at 4.8 BAR 341 727 965 1128 LPM at 5.5 BAR LPM at 6.2 BAR LPM at 6.9 BAR LPM at 7.6 BAR 526 829 1003 185 666 874 481 742 61 583 9306C-HM1C-3U, 9306S-HM1C-3U 9306C-HM3C-3U, 9306S-HM3C-3U 9306C-HM3C-3U, 9306S-HM3C-3U 9306C-HM5C-3U, 9306S-HM5C-3U Hyd. Flow GPM 15 16 17 GPM at 30 PSI 285 308 312 GPM at 40 PSI 269 291 312 GPM at 50 PSI 242 269 297 GPM at 60 PSI 212 242 270 Hyd. Flow LPM 56.8 60.6 64.4 LPM at 2.1 BAR 1079 1166 1181 LPM at 2.8 BAR 1018 1101 1181 LPM at 3.4 BAR 916 1018 1124 LPM at 4.1 BAR 802 916 1022 9306C-HM5C-3U, 9306S-HM5C-3U Teflon is a registered trademark of E.I. DuPont de Nemours and Co. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. ® 19 53 72 201 U.S. Units GPM at 120 PSI 24 Metric Units LPM at 8.3 BAR 91 U.S. Units GPM at 120 PSI 101 Metric Units LPM at 8.3 BAR 382 U.S. Units GPM at 70 PSI 182 212 242 GPM at 80 PSI 149 179 214 GPM at 90 PSI 112 149 187 GPM at 100 PSI 68 115 154 GPM at 110 PSI 19 78 122 GPM at 120 PSI LPM at 4.8 BAR 689 802 916 LPM at 5.5 BAR 564 677 810 LPM at 6.2 BAR 424 564 708 LPM at 6.9 BAR 257 435 583 LPM at 7.6 BAR 72 307 462 LPM at 8.3 BAR LPM at 8.9 BAR 159 310 167 39 37 82 GPM at 130 PSI 44 Metric Units CENTRIFUGAL PUMPS Hydraulically-Driven, Cast Iron & Stainless Steel-3U Flanged Hydraulically-Driven, Cast Iron Series 9307C For Flanged Connections You Will Also Need: Universal Flange Gasket Universal Flange Clamp Features See page 252 for details • Hydraulic motor drive (for open center, closed center and load-sensing systems) • Motor: external gear • Port sizes: 3" NPT inlet, 2" NPT outlet • Max. motor psi: 3000 (bar: 207) • Hydraulic ports: -10 SAE inlet and -12 SAE outlet • 300 x 220 universal flange available (U) • Pump seals: Life Guard silicon carbide standard • Max. fluid temperature: 140°F/60°C • Life Guard seals are the industry standard on OEM equipment • Impeller: stainless steel • Weight: 86 lbs./39 kg Order Information Model Number 9307C-GM10 9307C-GM12 3430-0604 Max GPM 370 370 Max LPM 1400 1400 Max PSI 135 135 Max BAR 9.3 9.3 Max Hyd. Max Hyd. Hydraulic Selection System GPM LPM 20 75.7 Open/Closed 23 87.1 Open/Closed Life Guard silicon carbide seal kit *Universal Flange (300 x 220) - Add Suffix “U” (i.e.: 9307C-GM10-U) 9307C-GM10, 9307C-GM10-U Hyd. Flow GPM 16 17 18 19 20 GPM at 30 PSI 282 318 346 361 370 GPM at 40 PSI 253 288 318 361 370 GPM at 50 PSI 219 258 291 338 351 GPM at 60 PSI 168 222 258 311 328 GPM at 70 PSI 73 174 222 281 301 GPM at 80 PSI GPM at 90 PSI GPM at 100 PSI 95 166 250 275 90 201 241 137 184 9307C-GM10, 9307C-GM10-U Hyd. Flow LPM 60.6 64.4 68.1 71.9 75.7 LPM at 2.1 BAR 1067 1204 1310 1366 1400 LPM at 2.8 BAR 958 1090 1204 1366 1400 LPM at 3.4 BAR 829 977 1101 1279 1329 LPM at 4.1 BAR 636 840 977 1177 1241 Hyd. Flow GPM 16 17 18 19 20 21 22 23 GPM at 30 PSI 222 246 274 302 326 345 60.6 64.4 68.1 71.9 75.7 79.5 83.3 87.1 LPM at 2.1 BAR 840 931 1037 1143 1234 1306 106 LPM at 5.5 BAR LPM at 6.2 BAR LPM at 6.9 BAR 360 628 946 1041 341 761 912 519 696 LPM at 7.6 BAR 401 U.S. Units GPM at 40 PSI 180 212 245 272 298 324 345 370 GPM at 50 PSI 115 166 209 242 271 297 322 344 GPM at 60 PSI GPM at 70 PSI GPM at 80 PSI GPM at 90 PSI GPM at 100 PSI 92 157 203 240 269 297 323 58 150 196 238 270 299 142 194 236 273 140 193 235 138 194 LPM at 2.8 BAR 681 802 927 1030 1128 1226 1306 1400 LPM at 3.4 BAR 435 628 791 916 1026 1124 1219 1302 LPM at 4.1 BAR LPM at 4.8 BAR LPM at 5.5 BAR LPM at 6.2 BAR LPM at 6.9 BAR LPM at 7.6 BAR 348 594 768 908 1018 1124 1223 220 568 742 901 1022 1132 537 734 893 1033 530 731 889 522 734 519 9307C-GM12, 9307C-GM12-U Hyd. Flow LPM GPM at 110 PSI Metric Units LPM at 4.8 BAR 276 659 840 1064 1139 9307C-GM12, 9307C-GM12-U U.S. Units 40 GPM at 110 PSI 137 Metric Units CENTRIFUGAL PUMPS Hydraulically-Driven, Cast Iron with ForceField Technology Series 9307CWS • ForceField seal technology to protect your pump against today’s harshest application environments: – Eliminates dry run failures – Eliminates chemical and fertilizer bonding failures – Prevents costly in-season downtime – Maintenance-free operation – Self-regulating chamber designed to provide pressure when needed and safe serviceability when it is not needed – Direct drop-in for current 9307 designs • Components designed for today’s high volume liquid fertilizer application on large capacity sprayers: – Hydraulic motor includes a case drain for maximum motor life – 316 stainless steel impeller – Two-piece shaft design includes 416 stainless steel wet end and 8620 hardened steel drive end – Bearings designed to handle continuous high volume pump loading For Flanged Connections You Will Also Need: Universal Flange Gasket Universal Flange Clamp • Capable of flows over 370 GPM (1400 LPM) at 40 PSI (2.8 BAR) • 300 universal flange inlet x 220 universal flange outlet See page 252 for details • One-year warranty that includes pump, motor and seals Order Information Model Number Max GPM Max LPM Max PSI Max BAR Max Hyd. GPM Max Hyd. LPM Hydraulic Selection System 9307CWS-GM12 370 1400 135 9.8 23 87.1 Open/Closed 9307CWS-GM12: Performance in water Hyd. Flow GPM 16 17 18 19 20 21 22 23 GPM at 30 PSI 222 246 274 302 326 345 345 370 GPM at 40 PSI 180 212 245 272 298 324 345 370 GPM at 50 PSI 115 166 209 242 271 297 322 344 GPM at 60 PSI GPM at 70 PSI GPM at 80 PSI GPM at 90 PSI GPM at 100 PSI 92 157 203 240 269 297 323 58 150 196 238 270 299 142 194 236 273 140 193 235 138 194 LPM at 2.1 BAR 840 931 1037 1143 1234 1306 1306 1400 LPM at 2.8 BAR 681 802 927 1030 1128 1226 1306 1400 LPM at 3.4 BAR 435 628 791 916 1026 1124 1219 1302 LPM at 4.1 BAR LPM at 4.8 BAR LPM at 5.5 BAR LPM at 6.2 BAR LPM at 6.9 BAR 348 594 768 908 1018 1124 1223 220 568 742 901 1022 1132 537 734 893 1033 530 731 889 522 734 9307CWS-GM12: Performance in water Hyd. Flow LPM 60.6 64.4 68.1 71.9 75.7 79.5 83.3 87.1 9307CWS-GM12: Performance in 28% liquid fertilizer Hyd. Flow GPM 16 17 18 19 20 21 22 23 GPM at 40 PSI 228 234 247 255 260 260 260 260 GPM at 50 PSI 204 219 247 255 260 260 260 260 GPM at 60 PSI 159 190 223 239 252 254 254 254 GPM at 70 PSI 100 147 194 221 240 248 248 249 Hyd. Flow LPM 60.6 64.4 68.1 71.9 75.7 79.5 83.3 87.1 LPM at 2.8 BAR 863 886 935 965 984 984 984 984 LPM at 3.4 BAR 772 829 935 965 984 984 984 984 LPM at 4.1 BAR 602 719 844 905 954 961 961 961 LPM at 4.8 BAR 379 556 734 836 908 939 939 942 GPM at 100 PSI GPM at 110 PSI GPM at 120 PSI GPM at 130 PSI 49 146 191 220 237 240 249 49 151 191 224 230 242 55 150 196 214 237 63 159 194 227 87 159 211 101 174 LPM at 6.2 BAR LPM at 6.9 BAR LPM at 7.6 BAR LPM at 8.3 BAR LPM at 9.0 BAR 185 572 723 848 871 916 208 568 742 810 897 238 602 734 859 329 602 799 382 659 41 Metric Units LPM at 7.6 BAR 519 GPM at 90 PSI LPM at 5.5 BAR 185 553 723 833 897 908 942 GPM at 110 PSI 137 GPM at 80 PSI 9307CWS-GM12: Performance in 28% liquid fertilizer U.S. Units U.S. Units GPM at 140 PSI 133 Metric Units LPM at 9.7 BAR 503 Hydraulically-Driven, Cast Iron Series 9308C Features • 5” ANSI-flanged inlet x 4” ANSI-flanged outlet • 316 stainless steel impeller for superior corrosion resistance • 9308 versions include a two-piece shaft design with a 416 stainless steel wet end and hardened 8620 drive end for extended life • Life Guard silicon carbide seal for premium abrasion resistance and dry-run protection • Life Guard seals are the industry standard on OEM equipment Order Information Model Number Max GPM Max LPM Max PSI Max BAR 9308C-PM15 9308C-GM25 9308CX 3430-0604 900 1078 3407 4081 58 72 4.0 5.0 9308C-PM15 Hyd. Flow GPM 8 GPM at 10 PSI 430 GPM at 20 PSI GPM at 30 PSI 12 656 656 416 16 900 900 900 9308C-GM25 Hyd. Flow GPM 17 23 28 GPM at 20 PSI 520 828 1078 Max Hyd GPM Max Hyd LPM Hydraulic Selection System 16 60.6 28 106 Pump head only Life Guard silicon carbide seal kit U.S. Units GPM at 40 PSI GPM at 50 PSI 778 607 9308C-PM15 Hyd. Flow LPM 30.3 U.S. Units GPM at 30 PSI GPM at 40 PSI GPM at 50 PSI GPM at 60 PSI GPM at 70 PSI 828 1078 667 965 296 845 667 380 LPM at 0.7 BAR 1628 LPM at 1.4 BAR LPM at 2.1 BAR 45.7 2483 2483 1575 60.6 3407 3407 3407 9308C-GM25 Hyd. Flow LPM 64.3 87.1 106 42 Open/Closed Open/Closed LPM at 1.4 BAR 1968 3134 4081 Metric Units LPM at 2.8 BAR LPM at 3.5 BAR 2945 2298 Metric Units LPM at 2.1 BAR LPM at 2.8 BAR LPM at 3.5 BAR LPM at 4.1 BAR LPM at 4.8 BAR 3134 4081 2525 3653 1120 3199 2525 1438 CENTRIFUGAL PUMPS Belt-Driven, Cast Iron, Self-Priming Series 9400C-SP Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Drive: 12-groove belt • Spring-loaded belt tensioner • Stainless steel wear ring • Stainless steel pump shaft, standard • Port sizes: 1-1⁄2" NPT inlet, 1-1⁄4" NPT outlet • Max. fluid temperature: 140°F/60°C • Housing: Cast iron • Impeller: Nylon • Pump shaft rotation: Counter clockwise when looking at shaft end • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide (B) available • Life Guard seals are the industry standard on OEM equipment • Weight: 57 lbs./25.9 kg Order Information Model Number Max GPM Max LPM Max PSI 9403C-540-SP 9403C-540Q-SP 9403C-540S-SP 9403C-1000-SP 9403C-1000L-SP 3430-0332 3430-0589 3430-0480SP 120 120 120 120 120 454 454 454 454 454 99 99 99 99 99 Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9403C-540-SP-B) 9403C-540-SP 500 540 600 GPM at 30 PSI 101 116 120 GPM at 40 PSI 83 102 119 GPM at 50 PSI 60 85 110 GPM at 60 PSI 27 62 97 GPM at 70 PSI GPM at 80 PSI 32 78 54 LPM at 0.7 BAR 432 454 454 LPM at 1.4 BAR 428 450 454 LPM at 2.1 BAR 382 439 454 LPM at 2.8 BAR 314 386 450 LPM at 3.4 BAR 227 322 416 LPM at 4.1 BAR 102 235 367 LPM at 4.8 BAR LPM at 5.5 BAR 121 295 204 GPM at 10 PSI 111 120 120 GPM at 20 PSI 109 119 120 GPM at 30 PSI 94 116 120 GPM at 40 PSI 74 102 119 GPM at 50 PSI 47 85 110 GPM at 60 PSI 21 62 97 GPM at 70 PSI GPM at 80 PSI 32 78 54 LPM at 0.7 BAR 420 454 454 LPM at 1.4 BAR 413 450 454 LPM at 2.1 BAR 356 439 454 LPM at 2.8 BAR 280 386 450 LPM at 3.4 BAR 178 322 416 LPM at 4.1 BAR 79 235 367 LPM at 4.8 BAR LPM at 5.5 BAR 121 295 204 9403C-1000-SP RPM 800 900 1000 9403C-1000-SP RPM 800 900 1000 PTO Output 1-3⁄8" female, 6 spline shaft 1-3⁄8" 6 spline quick coupler 1” (25.4 mm) solid shaft 1-3⁄8" female, 21-spline shaft 1-3⁄4" female, 20-spline shaft GPM at 20 PSI 113 119 120 500 540 600 RPM Max RPM 6.8 600 6.8 600 6.8 600 6.8 1000 6.8 1000 Seal kit standard Life Guard silicon carbide seal kit Self priming chamber kit GPM at 10 PSI 114 120 120 RPM 9403C-540-SP Max BAR Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 43 U.S. Units GPM at 90 PSI 24 Metric Units LPM at 6.2 BAR 91 U.S. Units GPM at 90 PSI 24 Metric Units LPM at 6.2 BAR 91 Belt-Driven, Cast Iron, Polpropylene & Stainless Steel Series 9400 Belt Drive Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard • Extend pump life with Stainess Steel – Fact: Chemical corrosion, pump cavitation, and abrasive wear are key factors in pump life – 316 Stainless Steel pumps provide superior chemical corrosion resistance, while maintaining material strength to prolong the life against abrasive wear – 316 Stainless Steel resists cavitation pitting of pumps, extending the wear life – Drop in replacements for cast iron pumps Features • Available in cast iron, polypropylene and 316 stainless steel for extended pump life • Drive: 12-groove belt For Flanged Connections You Will Also Need: • Spring-loaded belt tensioner Universal Flange Gasket Universal Flange Clamp • Stainless steel wear ring See page 252 for details • Stainless steel pump shaft, standard • Port sizes: 9402 models – 1-1⁄4" NPT inlet, 1" NPT outlet; 9403 models – 1-1⁄2" NPT inlet, 1-1⁄4" NPT outlet • 220 x 200 universal flange available (U) • Max. fluid temperature: 140°F/60°C • Impeller: Cast Iron models – Nylon; Poly & Stainless Steel models – Polypropylene • Pump shaft rotation: Counter clockwise when looking at shaft end • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide (B) available • Life Guard seals are the industry standard on OEM equipment • Weight: 40-45 lbs./18.2-20.5 kg Order Information Model Number Max GPM Max LPM Max PSI 9402C-540 9402C-540Q 9402C-540S 9402C-1000 9402C-1000L 9402C-1000S 9403C-540† 9403C-540Q† 9403C-540S† 9403C-1000† 9403C-1000L† 9403C-1000-MTZ* 9403C-1000-MTZ-KIT* 9403C-1000S† 9403P-540 9403P-540Q 9403P-540S 9403P-1000 9403P-1000L 9403P-1000S 9403S-540 9403S-540Q 9403S-540S 9403S-1000 9403S-1000L 9403S-1000S 3430-0332 3430-0476 3430-0477 3430-0589 3430-0333 3430-0478 3430-0479 3430-0590 3430-0796* 76 76 76 76 76 76 140 140 140 140 140 164 283 283 283 283 283 283 530 530 530 530 530 617 95 95 95 95 95 95 104 104 104 104 104 113 140 91 91 91 86 86 86 140 140 140 140 140 140 530 344 344 344 326 326 326 530 530 530 530 530 530 †Universal Flange (220 x 200) - Add Suffix “U” (i.e.: 9403C-1000S-U) Life Guard silicon carbide seal - Add suffix “B” (i.e.: 9402C-540-B) Available for order through Hypro-EU only (Cambridge, UK) Max BAR Max RPM PTO Output 6.5 600 1-3⁄8" female, 6-spline shaft 6.5 600 1-3⁄8" 6-spline quick coupler 6.5 600 1" (25.4 mm) solid shaft 6.5 1000 1-3⁄8" female, 21-spline shaft 6.5 1000 1-3⁄4" female, 20-spline shaft 6.5 1000 1" (25.4 mm) solid shaft 7.2 600 1-3⁄8" female, 6-spline shaft 7.2 600 1-3⁄8" 6-spline quick coupler 7.2 600 1" (25.4 mm) solid shaft 7.2 1000 1-3⁄8" female, 21-spline shaft 7.2 1000 1-3⁄4" female, 20-spline shaft 7.8 1000 38 mm female, 8-spline shaft Includes pump, Anti-rotation Kit and Vent Line kit 104 7.2 1000 1" (25.4 mm) solid shaft 83 5.7 600 1-3⁄8" female, 6-spline shaft 83 5.7 600 1-3⁄8" 6-spline quick coupler 83 5.7 600 1" (25.4 mm) solid shaft 83 5.7 1000 1-3⁄8" female, 21-spline shaft 83 5.7 1000 1-3⁄4" female, 20-spline shaft 83 5.7 1000 1" (25.4 mm) solid shaft 104 7.2 540 1-3⁄8" female, 6-spline shaft 104 7.2 540 1-3⁄8"" 6-spline quick coupler 104 7.2 540 1" (25.4 mm) solid shaft 104 7.2 1000 1-3⁄8" female, 21-spline shaft 104 7.2 1000 1-3⁄4" female, 20-spline shaft 104 7.2 1000 1" (25.4 mm) solid shaft Seal and o-ring repair kit Seal, o-ring, belt and gasket repair kit for 540 rpm drives Seal, o-ring, belt and gasket repair kit for 1000 rpm drives Life Guard silicon carbide seal kit Seal and o-ring repair kit (polypropylene) Seal, o-ring, belt and gasket repair kit for 540 rpm drives (polypropylene) Seal, o-ring, belt and gasket repair kit for 1000 rpm drives (polypropylene) Life Guard silicon carbide seal kit (polypropylene) Anti-Rotation Kit for MTZ pump Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. * For tractors MTZ 80 and 82. 44 U.S. Units 450 500 540 600 9402C-540 450 500 540 600 800 900 1000 RPM 450 500 540 600 U.S. Units RPM 800 900 1000 Metric Units RPM 450 500 540 600 GPM at 40 PSI 86 106 120 135 RPM 800 900 1000 GPM at 50 PSI 50 93 111 130 9403C-540, 9403S-540 RPM 450 500 540 600 LPM at 1.4 BAR 405 458 488 530 LPM at 2.1 BAR 375 439 481 522 LPM at 2.8 BAR 326 401 454 511 LPM at 3.4 BAR 189 352 420 492 9403C-1000, 9403S-1000 RPM 800 900 1000 GPM at 20 PSI 115 129 140 GPM at 30 PSI 106 127 139 GPM at 40 PSI 96 120 137 GPM at 50 PSI 80 111 133 9403C-1000, 9403S-1000 RPM 800 900 1000 LPM at 1.4 BAR 435 488 530 LPM at 2.1 BAR 401 481 526 LPM at 2.8 BAR 363 454 519 LPM at 3.4 BAR 303 420 503 9403C-1000-MTZ RPM 800 900 1000 GPM at 10 PSI 136 150 163 GPM at 20 PSI 132 149 162 GPM at 30 PSI 123 145 160 GPM at 40 PSI 112 135 155 GPM at 50 PSI 98 125 150 9403C-1000-MTZ RPM 800 900 1000 LPM at 0.7 Bar 515 568 617 LPM at 1.4 Bar 500 564 613 LPM at 2.1 Bar 466 549 606 LPM at 2.8 Bar 424 511 587 GPM at 40 PSI 46 60 70 79 GPM at 50 PSI 20 48 60 72 U.S. Units GPM at 60 PSI GPM at 70 PSI GPM at 80 PSI 22 46 64 58 38 Metric Units GPM at 20 PSI 73 82 86 GPM at 30 PSI 66 78 86 GPM at 40 PSI 58 70 79 GPM at 50 PSI 42 60 72 GPM at 70 PSI GPM at 80 PSI 46 64 58 38 LPM at 3.4 Bar 371 473 568 45 Metric Units LPM at LPM at LPM at LPM at LPM at LPM at LPM at 1.4 BAR 2.1 BAR 2.8 BAR 3.4 BAR 4.1 BAR 4.8 BAR 5.5 BAR 276 250 220 159 310 295 265 227 174 326 326 299 273 242 220 144 GPM at 60 PSI GPM at 70 PSI GPM at 80 PSI GPM at 90 PSI 76 98 121 42 80 112 50 94 73 LPM at 4.1 BAR LPM at 4.8 BAR LPM at 5.5 BAR LPM at 6.2 BAR 288 371 458 159 303 424 189 356 276 GPM at 60 PSI 56 98 128 GPM at 70 PSI GPM at 80 PSI GPM at 90 PSI 80 119 50 100 76 LPM at 4.1 BAR 212 371 485 LPM at 4.8 BAR LPM at 5.5 BAR LPM at 6.2 BAR 303 450 189 379 288 GPM at 60 PSI 70 115 140 LPM at 4.1 Bar 265 435 530 U.S. Units GPM at 60 PSI 9403P-1000 9403C-540, 9403S-540 GPM at 30 PSI 99 116 127 138 GPM at 30 PSI 60 70 78 88 LPM at LPM at LPM at LPM at LPM at LPM at LPM at 1.4 BAR 2.1 BAR 2.8 BAR 3.4 BAR 4.1 BAR 4.8 BAR 5.5 BAR 257 227 174 76 280 265 227 182 83 310 295 265 227 174 344 333 299 273 242 220 144 9403P-1000 LPM at LPM at LPM at LPM at LPM at LPM at LPM at LPM at LPM at 1.4 BAR 2.1 BAR 2.8 BAR 3.4 BAR 4.1 BAR 4.8 BAR 5.5 BAR 6.8 BAR 6.9 BAR 257 254 242 216 155 280 280 276 269 242 204 155 288 288 288 288 288 273 246 212 163 GPM at 20 PSI 107 121 129 140 GPM at 20 PSI 68 74 82 91 9403P-540 GPM at GPM at GPM at GPM at GPM at GPM at GPM at GPM at GPM at 20 PSI 30 PSI 40 PSI 50 PSI 60 PSI 70 PSI 80 PSI 90 PSI 100 PSI 68 67 64 57 41 74 74 73 71 64 54 41 76 76 76 76 76 72 65 56 43 9402C-1000 RPM 450 500 540 600 Metric Units 9402C-1000 800 900 1000 RPM LPM at LPM at LPM at LPM at LPM at LPM at LPM at LPM at 1.4 BAR 2.1 BAR 2.8 BAR 3.4 BAR 4.1 BAR 4.8 BAR 5.5 BAR 6.2 BAR 231 220 189 136 254 250 235 212 159 269 269 265 246 220 167 288 288 288 284 276 250 212 159 RPM RPM 9403P-540 GPM at GPM at GPM at GPM at GPM at GPM at GPM at GPM at 20 PSI 30 PSI 40 PSI 50 PSI 60 PSI 70 PSI 80 PSI 90 PSI 61 58 50 36 67 66 62 56 42 71 71 70 65 58 44 76 76 76 75 73 66 56 42 RPM GPM at 70 PSI 45 97 130 LPM at 4.8 Bar 170 367 492 U.S. Units GPM at 100 PSI 40 Metric Units LPM at 6.9 BAR 151 U.S. Units GPM at 100 PSI 46 Metric Units LPM at 6.9 BAR 174 GPM at 80 PSI GPM at 90 PSI GPM at 100 PSI 72 115 35 95 75 LPM at 5.5 Bar LPM at 6.2 Bar LPM at 6.9 Bar 273 435 132 360 284 U.S. Units GPM at 110 PSI 45 Metric Units LPM at 7.6 Bar 170 CENTRIFUGAL PUMPS 9402C-540 Gas Engine-Driven PowerPro, Cast Iron Models 1521C-65, 1521C-65M Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • PowerPro Engine (EPA & CARB certified) • Closed coupled, gas engine-driven • Max. fluid temperature: 140°F/60°C • Housing: cast iron • Impeller: Nylon • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide available • Life Guard seals are the industry standard on OEM equipment • Weight: 65 lbs./29.4kg Order Information Model Number Max GPM Max LPM Max PSI Max BAR Port Size Engine Mfgr. & HP 1521C-65 110 416 80 5.5 1-1⁄2" x 1-1⁄4" PowerPro 6.5 hp Same as 1521C-65 with mounting base 1521C-65M 1-1⁄2" x 1-1⁄4" centrifugal pump. DOES NOT include Engine. (Must use 5/8” threaded shaft engine) 1538 Seal and o-ring repair kit 3430-0332 Life Guard silicon carbide seal kit 3430-0589 1521C-65, 1521C-65M GPM at 10 PSI 110 GPM at 20 PSI 106 GPM at 30 PSI 96 GPM at 40 PSI 88 GPM at 50 PSI 80 1521C-65, 1521C-65M U.S. Units GPM at 60 PSI 60 GPM at 70 PSI 30 LPM at 0.7 BAR 416 LPM at 1.4 BAR 401 LPM at 2.1 BAR 363 LPM at 2.8 BAR 333 LPM at 3.4 BAR 303 Metric Units LPM at 4.1 BAR 227 LPM at 4.8 BAR 114 Gas Engine-Driven PowerPro, Cast Iron Models 1552C-130, 1522C-130E Features • PowerPro Engine (EPA & CARB certified) • Closed coupled, gas engine-driven • Max. fluid temperature: 140°F/60°C • Housing: cast iron • Impeller: Nylon • Pump seals: Viton®/ceramic standard • Weight: 110 lbs./50kg Order Information Model Number Max GPM Max (LPM) 1552C-130 1552C-130E 1551 3430-0464 170 170 644 644 1552C-130, 1552C-130E GPM at 20 PSI 170 GPM at 40 PSI 166 GPM at 60 PSI 148 GPM at 80 PSI 120 Max PSI Max BAR Port Size Engine Mfgr. & HP 150 10.3 2" x 1-1⁄2" PowerPro 13 hp 150 10.3 2" x 1-1⁄2" PowerPro 13 hp w/ electric start 2" x 1-1⁄2" centrifugal pump kit. DOES NOT include engine. (Must use 1” threaded shaft engine) Seal and o-ring repair kit GPM at 100 PSI 92 1552C-130, 1552C-130E U.S. Units GPM at 120 PSI 65 GPM at 140 PSI 35 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 46 LPM at 1.4 BAR 644 LPM at 2.8 BAR 628 LPM at 4.1 BAR 560 LPM at 5.5 BAR 454 LPM at 6.9 BAR 348 Metric Units LPM at 8.3 BAR 246 LPM at 9.7 BAR 132 CENTRIFUGAL PUMPS Gas Engine-Driven PowerPro, Cast Iron, Self-Priming Models 1522C-65SP Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • PowerPro Engine (EPA & CARB certified) • Closed coupled, gas engine-driven • Max. fluid temperature: 140°F/60°C • Housing: cast iron • Impeller: Nylon • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide available • Life Guard seals are the industry standard on OEM equipment • Fill Port 3/4" NPT Order Information Model Number Max GPM Max LPM Max PSI 1522C-65SP 130 492 65 Max BAR Port Size Engine Mfgr. & HP 4.5 2" x 2" PowerPro 6.5 hp 1538-SP* 2" x 2" centrifugal pump kit. does not include engine. 3430-0332 Seal and o-ring repair kit 3430-0589 Life Guard silicon carbide seal kit * Must use threaded-shaft engine. 1522C-65SP U.S. Units 1522C-65SP Metric Units LPM at LPM at LPM at LPM at LPM at LPM at LPM at LPM at LPM at 0 BAR 0.7. BAR 1.4 BAR 2.1 BAR 2.4 BAR 2.8 BAR 3.4 BAR 4.1 BAR 4.5 BAR 492 458 409 352 322 288 212 129 0 GPM at GPM at GPM at GPM at GPM at GPM at GPM at GPM at GPM at 0 PSI 10 PSI 20 PSI 30 PSI 35 PSI 40 PSI 50 PSI 60 PSI 65 PSI 130 121 108 93 85 76 56 34 0 Gas Engine-Driven PowerPro, Cast Iron, Self-Priming Models 1552C-130SP, 1552C-130ESP Features • PowerPro Engine (EPA & CARB certified) • Closed coupled, gas engine-driven • Max. fluid temperature: 140°F/60°C • Housing: cast iron • Impeller: Nylon • Pump seals: Viton®/ceramic standard • Fill Port 1" NPT Order Information Model Number Max GPM Max LPM Max PSI 1552C-130SP 1552C-130ESP 1551-SP* 1551-BSP* 3430-0464 163 163 617 617 147 147 * Must use threaded-shaft engine. 1552C-130SP, 1552C-130ESP Max BAR Port Size Engine Mfg. & HP 10.1 2" x 2" PowerPro 13 hp 10.1 2" x 2" PowerPro 13 hp w/ electric start 2" x 2" centrifugal pump kit. Does not include engine. 2" x 2" centrifugal pump kit. (BSP threads) Does not include engine. Seal and o-ring repair kit U.S. Units GPM at GPM at GPM at GPM at GPM at GPM at GPM at GPM at 0 PSI 20 PSI 40 PSI 60 PSI 80 PSI 100 PSI 120 PSI 140 PSI 163 161 148 122 100 75 51 27 1552C-130SP, 1552C-130ESP GPM at 147 PSI 0 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. LPMat 0BAR 617 47 LPMat LPMat LPMat 1.4BAR 12.8BAR 4.1BAR 609 560 462 Metric Units LPMat 5.5BAR 379 LPMat 6.9BAR 284 LPMat 8.3BAR 193 LPMat LPMat 9.7BAR 10.1BAR 102 0 Gas Engine-Driven, Cast Iron Models 1536 and 1539 Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Briggs & Stratton® engine (EPA & CARB certified) • Close-coupled, gas engine-driven • Max. fluid temperature: 140°F/60°C • Housing: cast iron • Impeller: Nylon • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide available • Life Guard seals are the industry standard on OEM equipment • Weight: 53 lbs./24.1 kg Order Information Model Number Max GPM Max LPM Max PSI Max BAR 1536 1539 1538* 3430-0332 3430-0589 110 416 75 5.2 GPM at 30 PSI 96 GPM at 40 PSI 87 GPM at 50 PSI 73 Port Size Engine Mfg. & HP 1-1⁄2" x 1-1/4” Briggs & Stratton® 5.5 hp Same as model 1536 without mounting base 1-1⁄2" x 1-1⁄4 " centrifugal pump kit. DOES NOT include engine. Seal and o-ring repair kit Life Guard silicon carbide seal kit * Must use threaded shaft engine. 1536, 1539 GPM at 10 PSI 110 GPM at 20 PSI 106 U.S. Units 1536, 1539 GPM at 60 PSI 50 LPM at 0.7 BAR 416 LPM at 1.4 BAR 401 LPM at 2.1 BAR 363 LPM at 2.8 BAR 329 Metric Units LPM at 3.4 BAR 276 LPM at 4.1 BAR 189 Briggs & Stratton® is a registered trademark of Briggs & Stratton Corporation. Gas Engine-Driven, Cast Iron Models 1537 and 1540 Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Honda® engine (EPA & CARB certified) • Close-coupled, gas engine-driven • Max. fluid temperature: 140°F/60°C • Housing: cast iron • Impeller: Nylon • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide available • Life Guard seals are the industry standard on OEM equipment • Weight: 53 lbs./24.1 kg Order Information Model Number Max GPM Max LPM Max PSI Max BAR 1537 1540 1538* 3430-0332 3420-0589 110 416 80 5.5 * Must use threaded shaft engine. 1537, 1540 GPM at 10 PSI 110 GPM at 20 PSI 106 GPM at 30 PSI 96 Viton® is a registered trademark of DuPont. GPM at 40 PSI 88 GPM at 50 PSI 80 Port Size Engine Mfg. & HP 1-1⁄2" x 1-1/4" Same as model 1537 without mounting base 1-1⁄2” x 1-1/4” centrifugal pump kit. DOES NOT include engine. Seal and o-ring repair kit Life Guard silicon carbide seal kit 1537, 1540 U.S. Units GPM at 60 PSI 60 GPM at 70 PSI 30 48 LPM at 0.7 BAR 416 LPM at 1.4 BAR 401 LPM at 2.1 BAR 363 Honda® 5.5 hp LPM at 2.8 BAR 333 LPM at 3.4 BAR 303 Metric Units LPM at 4.1 BAR 227 LPM at 4.8 BAR 114 Honda® is a registered trademark of Honda Motor Co., Ltd. Hypro is a registered trademark of Pentair Ltd. CENTRIFUGAL PUMPS Gas Engine-Driven, Cast Iron, Self-Priming Models 1536-SP and 1539-SP Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Briggs & Stratton® engine (EPA & CARB certified) • Max. fluid temperature: 140°F/60°C • Housing: cast iron • Impeller: Nylon • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide available • Life Guard seals are the industry standard on OEM equipment • Fill Port 3/4" NPT • Weight: 72 lbs./32.7 kg Order Information Model Number Max GPM Max LPM Max PSI 1536-SP 1539-SP 1538-SP* 3430-0332 3430-0482SP 3430-0589 100 379 65 Max BAR Port Size Engine Mfgr. & HP 4.5 2" x 2" Briggs & Stratton® 5.5 hp Same as model 1536-SP without mounting base 2" x 2" centrifugal pump kit. DOES NOT include engine. Seal kit standard Self-primer conversion kit Life Guard silicon carbide seal kit * Must use threaded shaft engine. 1536-SP, 1539-SP GPM at 10 PSI 92 GPM at 20 PSI 81 GPM at 30 PSI 67 GPM at 40 PSI 55 GPM at 50 PSI 40 1536-SP, 1539-SP U.S. Units LPM at 0.7 BAR 348 GPM at 60 PSI 15 LPM at 1.4 BAR 307 LPM at 2.1 BAR 254 LPM at 2.8 BAR 208 Metric Units LPM at 3.4 BAR 151 LPM at 4.1 BAR 57 Briggs & Stratton® is a registered trademark of Briggs & Stratton Corporation. Gas Engine-Driven, Cast Iron, Self-Priming Models 1537-SP and 1540-SP Upgrade Options: • Increase dry-run and abrasive resistance with Life Guard Seals – Life Guard seals are the OEM standard Features • Honda® engine (EPA & CARB certified) • Max. fluid temperature: 140°F/60°C • Housing: cast iron • Impeller: Nylon • Pump seals: Viton®/ceramic standard; Life Guard silicon carbide available • Life Guard seals are the industry standard on OEM equipment • Fill Port 3/4" NPT • Weight: 78 lbs./35 kg Order Information Model Number Max GPM Max LPM Max PSI 1537-SP 1540-SP 1538-SP* 3430-0332 3430-0482SP 3430-0589 106 401 75 GPM at 30 PSI 73 GPM at 40 PSI 60 GPM at 50 PSI 44 Max BAR Port Size Engine Mfgr. & HP 5.2 2" x 2" Same as model 1537-SP without mounting base 2" x 2" centrifugal pump kit. DOES NOT include engine. Seal kit standard Self-primer conversion kit Life Guard silicon carbide seal kit Honda® 5.5 hp * Must use threaded shaft engine. 1537-SP, 1540-SP GPM at 10 PSI 98 GPM at 20 PSI 87 Viton® is a registered trademark of DuPont. U.S. Units GPM at 60 PSI 21 1537-SP, 1540-SP 49 LPM at 0.7 BAR 371 LPM at 1.4 BAR 329 LPM at 2.1 BAR 276 LPM at 2.8 BAR 227 Metric Units LPM at 3.4 BAR 167 LPM at 4.1 BAR 79 Honda® is a registered trademark of Honda Motor Co., Ltd. Hypro is a registered trademark of Pentair. Gas Engine-Driven, Cast Iron Series 1550 • Honda® engine (EPA & CARB certified) • Close-coupled, gas engine-driven • Max. fluid temperature: 140°F/60°C • Housing: cast iron • Pump seals: Viton®/ceramic • Impeller: Nylon • Weight: 1 05 lbs./47.7 kg; SP and BSP: 125 lbs./56.8 kg Order Information Model Number Max GPM Max LPM Max PSI Max BAR Port Size Engine Mfgr. & HP Self Priming 1550 150 568 140 9.7 2" x 1-1⁄2" Honda 9 hp No 1550-SP 155 587 135 9.3 2" x 2" Honda® 9 hp Yes 1550-BSP† 155 587 135 9.3 2" x 2" Honda® 9 hp Yes ® 1551* 2" x 1-1⁄2"centrifugal pump kit. DOES NOT include engine. 1551-SP* 2" x 2" centrifugal pump kit. DOES NOT include engine. 3430-0464 Seal, o-ring, and gasket repair kit 3430-0779 Life Guard silicon carbide seal kit * Must use threaded shaft engine. † BSP Threads 1550 GPM at 20 PSI 145 U.S. Units GPM at 40 PSI 130 GPM at 60 PSI 107 GPM at 80 PSI 87 GPM at 100 PSI 69 GPM at 120 PSI 45 LPM at 2.8 BAR 492 LPM at 4.1 BAR 405 LPM at 5.5 BAR 329 LPM at 6.9 BAR 261 LPM at 8.3 BAR 170 1550 LPM at 1.4 BAR 549 1550-SP, 1550-BSP GPM at 140 PSI 16 GPM at 10 PSI 145 Metric Units GPM at 20 PSI 141 GPM at 40 PSI 118 1550-SP, 1550-BSP LPM at 9.7 BAR 61 LPM at 0.7 BAR 549 Viton® is a registered trademark of DuPont. LPM at 1.4 BAR 534 LPM at 2.1 BAR 447 U.S. Units GPM at 60 PSI 93 GPM at 80 PSI 71 GPM at 100 PSI 49 LPM at 2.8 BAR 352 LPM at 3.4 BAR 269 LPM at 4.1 BAR 185 GPM at 120 PSI 28 Metric Units LPM at 4.8 BAR 106 Honda® is a registered trademark of Honda Motor Co., Ltd. Hypro is a registered trademark of Pentair. 50 Standard Life Guard ForceField Technology Common Uses: Less demanding applications; minimal dry run or abrasive solution Common Uses: Suited for broad spraying applications including abrasive solutions Common Uses: Applications where downtime must be avoided. Material: Carbon on Ceramic Material: Silicon Carbide Material: Carbon on Silicon How it Works: Mechanical seals depend on their seal face conditions of flatness and finish tomaintain their sealing function while allowing the shaft to rotate. A spring ensures the seal faces stay in contact to prevent leaking. Elastomers are mated with adjacent shaft and housing components to complete the sealing system. Advantages over Standard: The hardness of Silicon Carbide approaches that of diamond and allows the seal to have outstanding service life when pumping abrasive solutions. Carbon graphite flakes are embedded into the silicon carbide faces to increase lubricity and provide survivability against incidental dry run and thermal shock. Advantages over Life Guard: ForceField wet seal technology protects seals by using a barrier fluid to keep them cool and lubricated, even while the pump is running dry. ForceField technology actively maintains a positive pressure differential between the chamber barrier fluid and the pumping solution,which prevents chemical bonding of the seal faces. The result is increased life and maintenance free operation. Industry tested and proven Pro: • Dependable life when protected • from dry run and abrasives • Least expensive option Con: • Minimal dry run resistance • Limited service life in abrasive solutions • Susceptible to chemical & fertilizer bonding failures The OEM standard Pro: • Extended service life in abrasive solutions • Enhanced dry run resistance • Drop-in replacement for standard seal Con: • Does not eliminate dry run failure • Susceptible to chemical & fertilizer bonding failures • Increased cost 4951 The premium choice Pro: • Eliminates dry run failure • Prevents chemical & fertilizer bonding failures • Maintenance-free operation • Warranted for one full year Con: • Not a drop-in replacement for standard or Life Guard seals • Increased cost CENTRIFUGAL PUMPS PUMPS CENTRIFUGAL Understanding Mechanical Seal Options Life Guard Silicon Carbide Pump Seals Specially designed to prolong seal life Side by Side Comparison The drawing to the right represents a cross sectional view of a Life Guard Premium Silicon Carbide Seal (top) and a standard seal (bottom). There are three key differences shown in the drawing: material, mating rings and balance. Material: The Life Guard seal utilizes silicon carbide (SiC) for its seal surfaces (primary ring and mating ring). This is more abrasion resistant than the carbon graphite and ceramic used in standard seals. SiC also runs cooler if the pump is run dry, improving the life of the seal. Mating Rings: The O-ring style of the Life Guard seal mating ring allows heat to dissipate into the pump casting. This keeps the seal at a lower temperature and dramatically improves the chances of the seal to survive a dry-run episode. Balance: The bellows and primary ring of the Life Guard seal are pressure balanced. This results in cooler operation at higher pressures. Life Guard silicon carbide seals are available in the following models: Pedestal mount, Flange mount, Clutch-driven, Hydraulically-driven, Belt-driven, and Gas Engine-driven. Life Guard Silicon Carbide Seal Kits Part Number Pump Series/Model # 3430-0589 9200, 9300 and 9400 Cast and Stainless US 5⁄8” Size Metric 15.9 mm Description Estimated Weight Ea. 4 oz./114 g 3430-0590 All Poly Models 3⁄4” 19 mm 3430-0604 9307 Series 1-3⁄8” 35 mm Mechanical seal and o-ring Mechanical seal, o-ring, gasket and washer for under acorn nut Mechanical seal and o-ring Mechanical seal, o-ring, gasket and washer for under acorn nut Mechanical seal, o-ring and gasket 3430-0646 9205 Models 3⁄4” 19 mm Mechanical seal and o-ring 4 oz./114 g 3430-0591 9000C-O and 9000C-O-SP 3⁄4” 19 mm Mechanical seal and o-ring 4 oz./114 g 3430-0593 9303P 5⁄8” 15.9 mm 3430-0601 9305C and 9305C-SP 5⁄8” 15.9 mm 52 4 oz./114 g 4 oz./114 g 4 oz./114 g 4 oz/114 g Provides Fast Self-Priming for Closed Impeller Cenrifugal Pumps • Creates self-priming capability for all standard centrifugal pump models • Increases priming efficiency over open impeller transfer pumps and self-priming centrifugal pumps • Allows the use of a single, high efficiency pump for both tank filling and spraying • Constructed out of 304 stainless steel for corrosion resistance • Protects the pump’s mechanical seal from dry-run during priming operations for on-board loading • Guards against unexpected dry-run conditions during spraying application, if system were to function automatically • Allows centrifugal pumps to be mounted in tight-fitting configurations while maintaining priming and flow performance capabilities • SPA can be mounted in nearby remote location up to 10 ft (3 m) from pump Order Information Model Number Description 1530-0024S 2" NPT Self-Priming Adaptor 1530-0028S 2" NPT High Volume Self-Priming Adaptor 3430-0700 Mounting Kit Self-Priming Adaptor Configuration Circulation Line Pump Tank Vent Line to Tank Product Line On-board Fill Line SPA Return Line Air/Water Mixture Air Only Water Only How the Self-Priming Adaptor Works To facilitate pump priming, liquid is circulated through the pump and eye of the impeller. The attached SelfPriming Adaptor (SPA) stores an initial amount of liquid for the priming operation. The SPA, when activated with two ball valves, separates the air from the liquid being circulated and releases it back to the atmosphere through the vent line. Only liquid returns back to the pump inlet, thereby eliminating the inlet suction line of air. Once the pump is primed, pump pressure and flow increases. Flow is directed to the tank. The operator then closes the two ball valves, shutting off the circulation path between the pump and SPA. 53 CENTRIFUGAL PUMPS Self-Priming Adaptor (SPA) Centrifugal Pump Accessories 12 Volt Clutch Part Number Shaft Size Pulley Type Max. HP 5.25" 2526-0011 7⁄8" (19 mm) (140 mm)-A 3430-0592 5⁄8" (15.9 mm) 5.00" (125 mm) Double Groove-A Max. RPM Max. AMPS @ 12V 30 5000 4.85 30 5000 3.75 Pump Model 9203P, 9253P-C, 9500P-S, 9205C, 9205C-SP 9202C, 9203C, 9206C, 9203C-R, 9262C-C, 9263C-C, 9263C-CR, 9203C-SP, 9262S-C, 9263S-C, 9263S-CR, 9263C-C-SP, 9263C-CR-SP Est. Weight Ea. 8 lbs./3.6kg 9 lbs./4.1kg Vent Line Kit Part Number Description Est. Weight Ea. Vent line kit with 25’ (6.3 m) long, 1⁄4" ID vinyl hose, 1⁄8" NPT x 1⁄4" HB 90˚ nylon elbow 3430-0456 fitting, 1⁄8" NPT x 1/4" HB straight polypropylene fitting, plastic hose clamp and plastic cable tie. Works with all Hypro centrifugals. Push-to-connect vent line kit with 25’ (6.3 m) long, 1⁄4” polyethylene tubing, 1/8” MNPT x 3430-0797 1⁄4” push-to-connect straight, 1/8” MNPT x 1⁄4” push-to-connect 90º elbow, and plastic cable ties. Works with all Hypro centrifugal pumps. 14 oz./397g 14 oz./397g PTO Mounting Clips Part Number 1520-0034 Pump Series Est. Weight Ea. 9000C-O (not for 9040 Series) 4 lbs./1.8 kg Hydraulic Test Kit Part Number Description Est. Weight Ea. 3430-0650 Hydraulic test kit with pressure and tank fixtures with flow meter and digital pressure gauges. Works with all Hypro HM series motors. 20 lbs./9.1 kg Centrifugal Pump Repair Tools Part Number Pump Series Description 3010-0061 9000 Main bearing suppport tool 3010-0064 9000, 9200, 9300 Support bar/sleeve extractor 3010-0066 9200, 9300 Wire brush 3010-0067 9200, 9300 Wire brush holder 3010-0084 9000, 9200, 9300 Internal/external retaining ring pliers 3010-0167 9000, 9300 Internal/external retaining ring pliers 3010-0168 9000, 9200, 9300 Tool box 3020-0008 9300 Allen wrench; 1/4" hex 3020-0009 9200, 9300 Allen wrench; 1/16" hex 3430-0650 9300 Hydraulic test kit 54 TRANSFER PUMPS Transfer Pump Selection Material Options: Aluminum Cast Iron Polypropylene Typical Use: Water Transfer Typical Use: Liquid Fertilizer Transfer Typical Use: Chemical Transfer The aluminum construction does not lend itself well to chemical transfer. Cast iron transfer pumps have thicker castings and stand up well to high density liquid fertilizers. Polypropylene has excellent corrosion resistance to virtually all Agricultural chemicals. Options include: 2” and 3” semi-trash and 3” trash Options include: 2” and 3” models available Options include: 2” and 3” models available Drive Options: Gas Engine Typical Use: Outdoor applications in a mobile environment such as on a sprayer nurse/tender trailer. Hydraulic Motor Typical Use: Applications where a smaller footprint is desired and hydraulic power is available. 55 Electric Motor Typical Use: Indoor and outdoor stationary applications where electrical power is available. Polypropylene, Gas Engine-Driven, 2 in. & 3 in. 1542P and1543P • Multiple gas engine options, including field proven Hypro PowerPro, Honda® and Briggs & Stratton® engines (EPA & CARB certified – North America; EC/CE Listed - Europe) • Housings: 2” x 2” Polypropylene or 3” x 3” polypropylene – highest performance available in a 3” transfer pump with highest efficiency and horsepower on the market • Pump Seals: EPDM Mechanical • Suction Lift: 25 ft./7.62 m • Poly impeller with stainless steel insert (3”); Nylon impeller (2”) 1542P-65SP • 2” versions available with or without frame 1543P-130SP Order Information 2" Gas Engine-Driven Model Number Max GPM Max LPM Max PSI Max BAR Port Size 1542P-65SP 200 757 58 4.0 2" x 2" NPT Impeller Profile 5 vane 1542P-65SPM 200 757 58 4.0 2" x 2" NPT 5 vane PowerPro 6.5 hp with frame 1542P-65ESP 200 757 58 4.0 2" x 2" NPT 5 vane PowerPro 6.5 hp w/ elec. start 1442P-65SP 200 757 58 4.0 2" x 2" NPT 5 vane 6.5 HP EC/CE listed 1542P-160HSP 200 757 58 4.0 2" x 2" NPT 5 vane Honda® GX160 1542P-200HSP 200 757 58 4.0 2" x 2" NPT 5 vane Honda® GX200 1542P-950BSP 200 757 58 4.0 2" x 2" NPT 5 vane Briggs & Stratton® 950 1542P-55SP 150 568 58 4.0 2" x 2" NPT 3 vane PowerPro 6.5 hp 1542P-550BSP 150 568 58 4.0 2" x 2" NPT 3 vane Briggs & Stratton® 550 3410-0041 Cam lock kit 3430-0690 Pump head kit for 1542P-55SP with EPDM seal 3430-0691 Pump head kit for 1542P-65SP with EPDM seal 3430-0635 EPDM seal kit 3430-0659 Viton seal kit GPM at 10 PSI 147 GPM at 20 PSI 131 GPM at 30 PSI 108 GPM at 40 PSI 80 GPM at 50 PSI 48 GPM at 10 PSI 182 GPM at 20 PSI 162 GPM at 30 PSI 136 GPM at 40 PSI 106 GPM at 58 PSI 0 LPM at 0 BAR 568 LPM at 0.7 BAR 556 LPM at 1.4 BAR 496 Metric Units LPM at 2.1 BAR 409 LPM at 2.8 BAR 303 LPM at 3.4 BAR 182 U.S. Units 1542P-65SP , 1542P-200HSP, 1542P-950BSP 1542P-65SP , 1542P-200HSP, 1542P-950BSP GPM at 0 PSI 200 PowerPro 6.5 hp U.S. Units 1542P-55SP , 1542P-550BSP 1542P-55SP , 1542P-550BSP GPM at 0 PSI 150 Engine Mfgr. & HP GPM at 50 PSI 65 LPM at 0 BAR 757 GPM at 58 PSI 0 LPM at 0.7 BAR 689 LPM at 1.4 BAR 613 LPM at 2.1 BAR 515 LPM at 4.0 BAR 0 Metric Units LPM at 2.8 BAR 401 LPM at 3.4 BAR 246 LPM at 4.0 BAR 0 Order Information 3" Gas Engine-Driven 1543P-130SP 440 1666 54 3.7 3"x 3" NPT Impeller Profile 5 vane 1543P-130ESP 440 1666 54 3.7 3"x 3" NPT 5 vane 1543P-130ESP-01 440 1666 54 3.7 300 x 300 UF 5 vane PowerPro 13 HP w/ elec. start 1543-390EHSP 440 1666 54 3.7 3"x3"NPT 5 vane Honda® GX390 w/ elec. start Model Number Max GPM Max LPM Max PSI Max BAR Port Size 3410-0042 Cam lock kit 3430-0692 Pump head kit with EPDM seal 3430-0692-02 Pump head kit with EPDM seal and 3" UF Fittings 3430-0757 EPDM seal kit 3430-0838 Viton seal kit Engine Mfgr. & HP PowerPro 13 HP PowerPro 13 HP w/ elec. start 1543P-130SP, 1543P-130ESP, 1543P-390EHSP, 1543P-130ESP-01 U.S. Units 1543P-130SP, 1543P-130ESP, 1543P-390EHSP,1543P-130ESP-01 Metric Units GPM at 0 PSI 440 GPM at 10 PSI 400 GPM at 20 PSI 338 GPM at 30 PSI 269 GPM at 40 PSI 184 GPM at 50 PSI 68 LPM at 0 BAR 1666 GPM at 58 PSI 0 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. LPM at 0.7 BAR 1514 LPM at 1.4 BAR 1279 LPM at 2.1 BAR 1018 LPM at 2.8 BAR 697 LPM at 3.4 BAR 257 LPM at 4.0 BAR 0 Honda® is a registered trademark of Honda Motor Co., Ltd. Briggs & Stratton® is a registered trademark of Briggs & Stratton Corporation. 56 TRANSFER PUMPS Polypropylene, Hydraulically-Driven, 2 in & 3 in. Series 9342P and 9343P • Housing: 2"x2" or 3" X 3" Polypropylene • Pump Seals: EPDM Mechancial • Suction lift: 25 ft./7.62 m • Poly impeller with stainless steel insert 9343P-GM6-SP 9342P-HM_C-5SP Order Information 2" Hydraulically-Driven Order Information 3" Hydraulically-Driven 9342P-HM1C-5SP Max GPM 200 Max LPM 757 Max PSI 58 Max BAR t40 2" x 2" NPT Motor Capacity 10 gpm 9342P-HM5C-5SP 206 780 60 41 2" x 2" NPT 11 gpm Model Number Port Size 3430-0690 Pump head kit for HM1C with EPDM seal 3430-0691 Pump head kit for HM5C with EPDM seal 3430-0635 EPDM seal kit 3430-0659 Viton seal kit 3410-0041 Cam lock kit Model Engine Mfg. Max GPM Max LPM Max PSI Max BAR Port Size Number & HP 450 1703 52 3.6 3”x 3” NPT Hydraulic 9343P-GM6-SP 9343P-GM6Y-SP* 450 1703 52 3.6 3”x 3” NPT Hydraulic 9343P-GM10-SP 484 1832 58 4.0 3”x 3” NPT Hydraulic 9343P-GM10Y-SP* 484 1832 58 4.0 3”x 3” NPT Hydraulic 3430-0692 Pump head kit with EPDM seal 3430-0692-02 Pump head kit with EPDM seal and 3" UF fittings 3430-0757 EDPM seal kit 3430-0838 Viton seal kit 3410-0042 Cam lock kit * Y= case drain motor U.S. Units 9342P-HM1C-5SP 9342P-HM1C-5SP Hyd. Flow GPM at GPM 0 PSI 8 165 9 185 10 200 GPM at 10 PSI 145 166 184 GPM at 20 PSI 122 144 164 GPM at 30 PSI 95 119 141 GPM at 40 PSI 57 86 114 GPM at 50 PSI GPM at 58 PSI 0 80 0 GPM at 20 PSI 123 149 169 GPM at 30 PSI 84 118 145 GPM at 40 PSI 0 76 117 GPM at 50 PSI GPM at 60 PSI 0 79 0 9342P-HM5C-5SP Hyd. Flow GPM at GPM 0 PSI 9 175 10 192 11 206 9343P-GM6-SP Performance 8 gal/min 9 gal/min 10 gal/min 11 gal/min Feet PSI GPM GPM GPM GPM 0 0 342 378 414 450 9343P-GM10-SP Feet Performance PSI 12 gal/min GPM 13 gal/min GPM 14 gal/min GPM 15 gal/min GPM 16 gal/min GPM U.S. Units GPM at 10 PSI 154 174 189 0 0 364 391 415 445 484 US Units 12 5 316 355 394 433 23 10 284 327 371 414 35 15 240 294 345 392 46 20 176 252 314 368 58 25 67 194 276 340 69 30 103 227 307 81 35 155 265 92 104 116 127 40 45 50 55 52 210 128 28 - 12 5 340 368 395 426 466 23 10 310 342 373 406 446 35 15 274 312 348 383 425 46 20 227 275 318 357 401 58 25 157 227 282 327 374 69 30 46 158 236 292 344 81 35 55 170 247 309 92 40 74 187 266 Hyd.Flow LPM 30.3 34.1 37.9 LPM at 0 BAR 625 700 757 LPM at 0.7 BAR 549 630 695 LPM at 2.1 BAR 358 449 534 LPM at 2.8 BAR 215 325 433 9342P-HM5C-5SP Hyd. Flow LPM 34.1 37.9 41.6 9343P-GM6-SP m Performance BAR 30 l/min LPM 35 l/min LPM 40 l/min LPM at 4.0 BAR 0 301 0 Metric Units 5.1 0.50 1110 1335 10.2 1.00 885 1180 12.8 1.25 730 1085 15.3 1.50 495 970 17.9 1.75 145 825 5.1 0.50 1225 1390 1535 1730 10.2 1.00 1045 1240 1405 1610 12.8 1.25 925 1150 1335 1540 15.3 1.50 775 1045 1255 1470 17.9 1.75 560 920 1165 1390 LPM at 4.1 BAR 0 Metric Units 20.4 23.0 25.5 28.1 30.6 33.2 35.7 2.00 2.25 2.50 2.75 3.00 3.25 3.50 165 630 345 35 - LPM 1545 1425 1355 1270 1185 1080 960 805 600 325 m Performance BAR 45 l/min LPM 50 l/min LPM 55 l/min LPM LPM 60 l/min 57 LPM at 3.4 BAR LPM at 0.7 LPM at 1.4 LPM at 2.1 LPM at 2.8 LPM at 3.4 BAR BAR BAR BAR BAR 582 467 316 0 658 562 446 288 0 717 639 550 442 299 LPM at 0 BAR 662 727 780 US Units 9343P-GM10-SP 104 116 127 45 50 55 102 7 211 139 47 Metric Units LPM at 1.4 BAR 463 547 620 20.4 2.00 250 760 1060 1305 23.0 2.25 43 540 935 1215 25.5 2.50 255 780 1105 28.1 2.75 -24 575 985 45 - Metric Units 30.6 3.00 310 840 33.2 35.7 3.25 3.50 35 665 445 Polypropylene, Pedestal Mount, 3 in. Series 9243P Order Information • Housing: 3" X 3" Polypropylene Model Number 9243P-SP 3430-0692 3430-0692-02 3430-0757 3430-0838 3410-0042 • Pump Seals: EPDM Mechancial • Suction lift: 25 ft./7.62 m • Poly impeller with stainless steel insert 9243P-SP 2900 RPM 3200 RPM 3500 RPM Feet PSI GPM HP GPM HP GPM HP 0 12 23 35 46 58 69 0 5 10 15 20 25 30 380 358 342 312 275 224 160 7.1 6.8 6.5 6.3 6.0 5.6 5.0 424 405 384 359 331 297 251 9.1 8.9 8.7 8.5 8.3 8.0 7.5 460 445 425 404 379 353 321 12.2 11.8 11.4 11.1 10.9 10.6 10.2 Max GPM 92 40 103 6.2 227 9.2 104 45 0 5.3 159 8.5 116 50 70 7.5 2900 RPM 3200 RPM 3500 RPM m BAR LPM kW LPM kW LPM kW Max PSI Max BAR Port Size 460 1741 54 3.7 3”x 3” NPT Pump head kit with EPDM seal Pump head kit with EPDM seal and 3" UF Fittings EDPM seal kit Viton seal kit Cam lock kit U.S. Units 9243P-SP 81 35 50 4.2 193 7.0 280 9.8 Max LPM 5.1 0.50 1325 5.0 1497 6.6 1650 8.7 10.2 1.00 1193 4.7 1378 6.4 1537 8.3 12.8 1.25 1097 4.6 1301 6.3 1471 8.2 Metric Units 15.3 1.50 980 4.4 1215 6.1 1403 8.0 17.9 20.4 23.0 25.5 28.1 30.6 33.2 35.7 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 830 637 376 46 4.1 3.8 3.4 2.9 1118 996 853 660 403 154 6.0 5.7 5.5 5.2 4.7 4.3 1328 1242 1139 1016 866 685 467 208 7.9 7.7 7.5 7.2 6.9 6.5 6.0 5.5 Polypropylene, Electric-Driven, 2 in. Series 9742P •A vailable with either 5 hp or 7.5 hp 50/60 hz TEFC Baldor electric motor -Three phase 230/460 volt motors in both 5 hp & 7.5 hp -Single phase 230 volt motor available in 5 hp • Housing: 2” x 2” Polypropylene •P ump Seals: EPDM Mechanical •S uction Lift: 25ft/7.62m •N ylon impeller Order Information 50 Hz Order Information 60 Hz Model Number Max GPM Max LPM Max PSI Max BAR Port Size Engine Mfg. & HP Mounting Bolts Model Number Max GPM Max LPM Max PSI Max BAR Port Size Engine Mfg. & HP Mounting Bolts 9742P-050SPT 120 454 32 2.2 2”x 2” NPT Polypropylene 5/16" or M8 9742P-050SPT 150 568 47 3.2 2”x 2” NPT Polypropylene 5/16" or M8 9742P-050SPT3 120 454 32 2.2 2”x 2” NPT Polypropylene 5/16" or M8 9742P-050SPT3 150 568 47 3.2 2”x 2” NPT Polypropylene 5/16" or M8 9742P-075SPT3 160 606 37 2.6 2”x 2” NPT Polypropylene 5/16" or M8 9742P-075SPT3 188 712 54 3.7 2”x 2” NPT Polypropylene 5/16" or M8 US 9742P-050SPT & 9742P-050SPT3 9742P-050SPT & 9742P-050SPT3 60 Hz 50 Hz 0 20 25 30 35 40 45 47 GPM 150 142 133 123 111 97 84 66 43 9 0 PSI 5 0 15 10 15 20 25 30 32 - - - GPM 120 110 100 85 67 42 10 0 - - - PSI 5 10 50 Hz 45 50 54 GPM 188 185 181 173 163 151 136 120 102 76 PSI 0 5 10 15 20 25 30 35 40 44 0 25 30 35 37 - - - GPM 160 155 143 129 112 90 65 20 0 - - - PSI 0 5 50 Hz 3.1 3.2 LPM 568 538 503 466 420 367 318 250 163 34 0 0.3 0.7 0.7 1 1 10 15 20 58 60 Hz 50 Hz 1.4 2.1 2.4 2.1 2.2 - - - LPM 454 416 379 322 254 159 38 0 - - - BAR 0 0.3 0.7 1.4 1.7 1.7 BAR 0 0.3 US 9742P-075SPT3 9742P-075SPT3 60 Hz 60 Hz 0 Metric 2.8 BAR 1 Metric 1.4 1.7 2.1 2.4 2.8 3.1 3.4 3.7 LPM 712 700 685 655 617 572 515 454 386 288 167 BAR 0 0.3 0.7 1 1.4 1.7 2.1 2.4 2.6 LPM 606 587 541 488 424 341 246 76 0 0 - - - - - - Series 1530 • Gas engine driven (EPA & CARB certified) • Pump seals: fluoroelastomer (viton) TRANSFER PUMPS Cast Iron Gas, Engine-Driven, 2 in. & 3 in. • Suction lift: 20 ft. (6 m) • Flapper valve: EPDM Order Information Mode Number 1532C-6SP 1532C-160HSP 1533C-13SP 1533C-13ESP 1533C-390EHSP 3430-0673CSP 3430-0674CSP 1532C-6SP with PowerPro Engine 1532C-6SP, 1532C-160HSP GPM at 0 PSI 170 GPM at 5 PSI 155 GPM at 10 PSI 140 GPM at 15 PSI 123 GPM at 20 PSI 106 GPM at 25 PSI 87 GPM at 30 PSI 65 GPM at 35 PSI 42 Max GPM 170 170 330 330 330 170 330 Max LPM 644 644 1249 1249 1249 644 1249 Max PSI 42 42 60 60 60 42 60 Max BAR 2.9 2.9 4.1 4.1 4.1 2.9 4.1 Port Size Engine Mfgr. & HP 2" x 2" NPT PowerPro 6.5 hp 2” x 2” NPT Honda GX160 3" x 3" NPT PowerPro 13 hp 3" x 3" NPT PowerPro 13 hp w/ electric start 3" x 3" NPT Honda GX390 w/ electric start Pump head kit for 2" NPT self-priming cast iron transfer pump Pump head kit for 3" NPT self-priming cast iron transfer pump U.S. Units 1532C-6SP, 1532-160HSP GPM at 40 PSI 14 GPM at 42 PSI 0 LPM at 0.0 BAR 644 LPM at 0.3 BAR 587 LPM at 0.7 BAR 530 LPM at 1.0 BAR 466 LPM at 1.4 BAR 401 LPM at 1.7 BAR 329 LPM at 2.1 BAR 246 LPM at 2.4 BAR 159 Metric Units LPM at LPM at 2.8 BAR 2.9 BAR 53 0 1533C-13SP, 1533C-13ESP, 1533C-390EHSP GPM at 0 PSI 330 GPM at 5 PSI 325 GPM at 10 PSI 321 GPM at 15 PSI 315 GPM at 20 PSI 296 U.S. Units GPM at 25 PSI 273 GPM at 30 PSI 248 1533C-13SP, 1533C-13ESP, 1533C-390EHSP LPM at 0.0 BAR 1249 LPM at 0.3 BAR 1230 LPM at 0.7 BAR 1215 LPM at 1.0 BAR 1192 LPM at 1.4 BAR 1120 LPM at 1.7 BAR 1033 LPM at 2.1 BAR 938 GPM at 35 PSI 221 GPM at 40 PSI 192 GPM at 45 PSI 161 GPM at 50 PSI 129 GPM at 60 PSI 48 LPM at 2.4 BAR 836 LPM at 2.8 BAR 726 LPM at 3.1 BAR 609 LPM at 3.4 BAR 488 LPM at 4.1 BAR 181 GPM at 66 PSI 0 Metric Units LPM at 4.6 BAR 0 Cast Iron, Pedesal-Mount, 2 in. & 3 in. Order Information Max GPM Max LPM Max PSI Max BAR 9232C-SP 170 644 42 2.9 9233C-SP 330 1249 60 4.1 3430-0673CSP 170 644 42 2.9 3430-0674CSP 330 1249 60 4.1 Model Number 3430-0674CSP 9232C-SP 3430-0675 Replacement pedestal for 2" NPT self-priming cast iron transfer pump 3430-0676 Replacement pedestal for 3" NPT self-priming cast iron transfer pump 9232C-SP, 3430-0673CSP GPM at 0 PSI 170 GPM at 5 PSI 155 GPM at 10 PSI 140 GPM at 15 PSI 123 GPM at 20 PSI 106 9232C-SP, 3430-0673CSP LPM at 0.0 BAR 644 LPM at 0.3 BAR 587 LPM at 0.7 BAR 530 LPM at 1.0 BAR 466 LPM at 1.4 BAR 401 9233C-SP, 3430-0674CSP GPM at 0 PSI 330 GPM at 5 PSI 325 GPM at 10 PSI 321 GPM at 15 PSI 315 GPM at 20 PSI 296 GPM at 25 PSI 273 GPM at 30 PSI 248 9233C-SP, 3430-0674CSP LPM at 0.0 BAR 1249 LPM at 0.3 BAR 1230 LPM at 0.7 BAR 1215 LPM at 1.0 BAR 1192 LPM at 1.4 BAR 1120 Description 2" x 2" NPT self priming pedestal-mount cast iron transfer pump 3" x 3" NPT self priming pedestal-mount cast iron transfer pump Pump head kit for 2" NPT self-priming cast iron transfer pump Pump head kit for 3" NPT self-priming cast iron transfer pump LPM at 1.7 BAR 1033 LPM at 2.1 BAR 938 59 GPM at 25 PSI 87 GPM at 30 PSI 65 GPM at 35 PSI 42 GPM at 40 PSI 14 LPM at 1.7 BAR 329 LPM at 2.1 BAR 246 LPM at 2.4 BAR 159 LPM at 2.8 BAR 53 U.S. Units GPM at 42 PSI 0 Metric Units LPM at 2.9 BAR 0 GPM at 35 PSI 221 GPM at 40 PSI 192 GPM at 45 PSI 161 GPM at 50 PSI 129 GPM at 60 PSI 48 LPM at 2.4 BAR 836 LPM at 2.8 BAR 726 LPM at 3.1 BAR 609 LPM at 3.4 BAR 488 LPM at 4.1 BAR 181 U.S. Units GPM at 66 PSI 0 Metric Units LPM at 4.6 BAR 0 Cast Iron, Hydraulically-Driven, 2 in. • Housing: cast iron • Pump seals: fluoroelastomer (viton) • Suction lift: 20 ft. (6 m) • Flapper valve: EPDM Order Information Model Number Max GPM Max LPM 9332C-HM1C-SP 9332C-HM5C-SP 9332C-HM_C-SP 170 170 644 644 Max PSI Max BAR Hyd. Flow GPM Hyd. Flow LPM 60 60 4.1 4.1 13 16 49 60 Port Size 2” x 2” NPT 2” x 2” NPT 9332C-HM1C-SP U.S. Units 9332C-HM1C-SP Metric Units 9332C-HM5C-SP U.S. Units 9332C-HM5C-SP Metric Units Hyd. Flow GPM at GPM at GPM at GPM at GPM at GPM at GPM at GPM at GPM 0 PSI 5 PSI 10 PSI 20 PSI 30 PSI 40 PSI 50 PSI 60 PSI 8 150 138 124 88 53 0 9 160 150 140 113 79 48 0 10 170 163 155 135 108 77 42 0 Hyd. Flow LPM at LPM at LPM at LPM at LPM at LPM at LPM at LPM at LPM 0.0 BAR 0.3 BAR 0.7 BAR 1.4 BAR 2.1 BAR 2.8 BAR 3.4 BAR 4.1 BAR 30 568 522 469 333 201 0 34 606 567 530 428 229 182 0 38 643 617 587 511 409 291 159 0 Hyd. Flow LPM at LPM at LPM at LPM at LPM at LPM at LPM at LPM at LPM 0.0 BAR 0.3 BAR 0.7 BAR 1.4 BAR 2.1 BAR 2.8 BAR 3.4 BAR 4.1 BAR 38 568 522 466 341 208 0 42 606 568 530 428 299 182 0 45 644 617 587 511 409 291 158 0 Hyd. Flow GPM at GPM at GPM at GPM at GPM at GPM at GPM at GPM at GPM 0 PSI 5 PSI 10 PSI 20 PSI 30 PSI 40 PSI 50 PSI 60 PSI 10 150 138 123 90 55 0 11 160 150 140 113 79 48 0 12 170 163 155 135 108 77 42 0 Cast Iron, Electric Motor Mount, 2 in. & 3 in. • Housing: cast iron • Pump seals: fluoroelastomer (viton) • Suction lift: 20 ft. (6 m) • Flapper valve: EPDM Order Information Model Number Max GPM Max LPM Max PSI Max BAR Port Size NEMA Frame 9732C-SPX* 9733C-SPX* 170 330 644 1249 42 60 2.9 4.1 2" x 2" NPT 3" x 3" NPT 182⁄184TC 215TC * Electric Motor not included 9732C-SPX U.S. Units GPM at GPM at GPM at GPM at GPM at GPM at GPM at GPM at GPM at 0 PSI 5 PSI 10 PSI 15 PSI 20 PSI 25 PSI 30 PSI 35 PSI 40 PSI 170 151 133 113 94 74 52 25 0 9732C-SPX LPM at 0.0 BAR 644 LPM at 0.3 BAR 572 LPM at 0.7 BAR 503 LPM at 1.0 BAR 428 LPM at 1.4 BAR 356 LPM at 1.7 BAR 280 LPM at 2.1 BAR 197 Metric Units LPM at LPM at 2.8 2.4 BAR BAR 95 0 9733C-SPX GPM at 0 PSI 330 GPM at 5 PSI 325 U.S. Units GPM at 10 PSI 320 GPM at 15 PSI 310 GPM at 20 PSI 290 GPM at 25 PSI 265 GPM at 30 PSI 230 9733C-SPX LPM at 0.0 BAR 1249 LPM at 0.3 BAR 1230 LPM at 0.7 BAR 1211 LPM at 1.0 BAR 1173 LPM at 1.4 BAR 1098 LPM at 1.7 BAR 1003 LPM at 2.1 BAR 871 60 GPM at 35 PSI 195 GPM at 40 PSI 163 GPM at 45 PSI 133 GPM at 50 PSI 95 GPM at 55 PSI 50 GPM at 60 PSI 11 LPM at 2.4 BAR 738 LPM at 2.8 BAR 617 LPM at 3.1 BAR 503 LPM at 3.4 BAR 360 LPM at 3.8 BAR 190 LPM at 4.1 BAR 42 GPM at 61 PSI 0 Metric Units LPM at 4.2 BAR 0 TRANSFER PUMPS Aluminum Gas Engine-Driven, 2 in. & 3 in. Series 1540A • PowerPro Gas engine driven (EPA & CARB certified) • Housing: Aluminum • Pump seals: EPDM Mechanical • Suction lift: -13 ft./4m (1541A) -23 ft./7.01m (1542A & 1543A) • Trash pumps will handle 1-1/8” (29 mm) solids • Transfer pumps will handle 3/8” (9.5mm) solids 1541A-SP • Framed: 1542A &1543A versions only 1543A-65TSP Order Information Model Number 1543A-65SP 1541A-SP GPM at 0 PSI 40 GPM at 10 PSI 28 GPM at 15 PSI 21 GPM at 20 PSI 14 GPM at 25 PSI 7 1542A-65SP , 1542A-160HSP, 1542P-550BSP GPM at 5 PSI 147 GPM at 10 PSI 144 GPM at 15 PSI 136.6 GPM at 20 PSI 124.7 Max GPM Max LPM Max PSI Max BAR LPM at 0.7 BAR 545.1 LPM at 1.0 BAR 517.1 LPM at 1.4 BAR 472 1541A-SP 40 151 28 1.9 2" x 2" BSP PowerPro 2.5 hp 147 556 50 3.4 2" x 2" NPT PowerPro 6.5 hp 1542A-160HSP 147 556 50 3.4 2" x 2" NPT Honda® GX160 1542A-550BSP 147 556 50 3.4 2" x 2" NPT Briggs & Stratton® 550 PowerPro 6.5 hp 1543A-65SP 259 980 50 3.4 3" x 3" NPT 1543A-160HSP 259 980 50 3.4 3" x 3" NPT Honda® GX160 1543A-65TSP (Trash) 272 1030 50 3.4 3" x 3" NPT PowerPro 6.5 hp 1543A-160HTS P 272 1030 50 3.4 3" x 3" NPT Honda® GX160 3430-0791 3" Trash Kit (NPT ports, SAE 3/4” keyed shaft mount) 3430-0792 2" Transfer Kit (NPT ports, SAE 3/4” keyed shaft mount) 3430-0793 3" Transfer Kit (NPT ports, SAE 3/4” keyed shaft mount) U.S. Units 1541A-SP GPM at 28 PSI 0 LPM at 0 BAR 151.4 GPM at 25 PSI 110.2 LPM at 1.7 BAR 417.2 1543A-65SP, 1543A-160HSP GPM at 5 PSI 259 GPM at 10 PSI 251.6 GPM at 15 PSI 233.7 GPM at 20 PSI 213.6 GPM at 25 PSI 190.9 1543A-65SP, 1543A-160HSP LPM at 0.3 BAR 980.4 LPM at 0.7 BAR 952.4 LPM at 1.0 BAR 884.6 LPM at 1.4 BAR 808.6 LPM at 1.7 BAR 722.6 1543A-65TSP, 1543A-160HTSP GPM at 5 PSI 272 GPM at 10 PSI 269.8 GPM at 15 PSI 241 GPM at 20 PSI 207.6 GPM at 25 PSI 179.3 1543A-65TSP, 1543A-160HTSP LPM at 0.3 BAR 1029.6 LPM at 0.7 BAR 1021.3 LPM at 1.0 BAR 912.3 LPM at 1.4 BAR 785.8 Engine Mfgr. & HP 1542A-65SP 1542A-65SP, 1542A-160HSP, 1542P-550BSP LPM at 0.3 BAR 556.5 Port Size LPM at 1.7 BAR 678.7 LPM at 0.7 BAR 106.0 LPM at 1.4 BAR 53.0 Metric Units LPM at 1.7 BAR 26.5 GPM at 30 PSI 94.1 GPM at 35 PSI 78.3 GPM at 40 PSI 57.1 GPM at 45 PSI 19.2 LPM at 2.1 BAR 356.2 LPM at 2.4 BAR 296.4 LPM at 2.8 BAR 216.1 LPM at 3.1 BAR 72.7 GPM at 30 PSI 162.2 GPM at 35 PSI 135.8 GPM at 40 PSI 99.3 GPM at 45 PSI 56.1 LPM at 2.1 BAR 614 LPM at 2.4 BAR 514.1 LPM at 2.8 BAR 375.9 LPM at 3.1 BAR 212.4 GPM at 30 PSI 140.4 GPM at 35 PSI 98.1 GPM at 40 PSI 50.7 GPM at 45 PSI 5.4 LPM at 2.1 BAR 531.5 LPM at 2.4 BAR 371.3 LPM at 2.8 BAR 191.9 LPM at 3.1 BAR 20.4 Honda® is a registered trademark of Honda Motor Co., Ltd. Briggs & Stratton® is a registered trademark of Briggs & Stratton Corporation. Hypro® is a registered trademark of Pentair ltd. 61 LPM at 1.0 BAR 79.5 LPM at 1.9 BAR 0 U.S. Units GPM at 50 PSI 0 Metric Units LPM at 3.4 BAR 0 U.S. Units GPM at 50 PSI 8.7 Metric Units LPM at 3.4 BAR 32.9 U.S. Units GPM at 50 PSI 0 Metric Units LPM at 3.4 BAR 0 Aluminum, Gas Engine-Driven, 2 in. & 3 in. Series 1570 • Honda® engine (EPA & CARB certified) • Close-coupled, gas engine driven 1572-SPX • Housing: Aluminum • Pump seals: Buna-N/ceramic • Inlet valve: Buna-N • Suction lift: 28 ft./8.53m 1573-SPX Order Information Model Number Max GPM Max LPM Max PSI Max BAR Port Size Engine Mfgr. & HP 1572-SPX 145 549 50 3.4 2" x 2" NPT Honda® 4 hp 1573-SPX 280 1060 50 3.4 3" x 3" NPT Honda® 5.5 hp 1572-SPX GPM at 0 PSI 145 GPM at 5 PSI 141 GPM at 10 PSI 133 GPM at 15 PSI 125 GPM at 20 PSI 114 GPM at 25 PSI 102 GPM at 30 PSI 87 GPM at 35 PSI 70 GPM at 40 PSI 51 GPM at 45 PSI 24 LPM at 2.1 BAR 329 LPM at 2.4 BAR 265 LPM at 2.8 BAR 193 LPM at 3.1 BAR 91 GPM at 30 PSI 149 GPM at 35 PSI 115 GPM at 40 PSI 77 GPM at 45 PSI 46 LPM at 2.1 BAR 564 LPM at 2.4 BAR 435 LPM at 2.8 BAR 291 LPM at 3.1 BAR 174 1572-SPX LPM at 0.0 BAR 549 LPM at 0.3 BAR 534 LPM at 0.7 BAR 503 LPM at 1.0 BAR 473 LPM at 1.4 BAR 432 LPM at 1.7 BAR 386 1573-SPX GPM at 0 PSI 280 GPM at 5 PSI 268 GPM at 10 PSI 255 GPM at 15 PSI 233 GPM at 20 PSI 211 GPM at 25 PSI 181 1573-SPX LPM at 0.0 BAR 1060 LPM at 0.3 BAR 1014 LPM at 0.7 BAR 965 LPM at 1.0 BAR 882 LPM at 1.4 BAR 799 LPM at 1.7 BAR 685 U.S. Units GPM at 50 PSI 0 Metric Units LPM at 3.4 BAR U.S. Units GPM at 50 PSI 0 Metric Units LPM at 3.4 BAR Transfer Pumps Accessories Transfer Pump Cam Lock Kit Hypro cam lock kits easily add heavy-duty male cam lock connections to the NPT ports of 2" and 3" polypropylene pumps. • Includes one male cam lock adapter for pump inlet • Includes one heavy-duty 90º elbow and one male cam lock adapter for the pump outlet • Prepares transfer pumps for the most common means of quick coupling a hose • Interchangeable with other cam lock fittings made to MIL-C-27487 specifications Order Information Size 2" NPT 3" NPT Honda® is a registered trademark of Honda Motor Co., Ltd. Hypro® is a registered trademark of Pentair. 62 Model Number 3410-0041 3410-0042 ROLLER PUMPS Roller Pump Comparisons Get up to 10 times longer pump life with Hypro Silver Series XL Roller pumps! These three pump housings were photographed after being tested with a 30:1 mix of water and Roundup® herbicide. The Ni-Resist and Cast Iron indicate damage from pitting and corrosion, but the Silver Series XL is in like-new condition after more than 1000 hours of use. Silver Series XL Ni-Resist Cast Iron 100% PUMP OUTPUT Herbicide Users: Get up to 10 times longer pump life! • Cast Iron pumps lasted to 140 hours before failure. • Ni-Resist pumps lasted to 332 hours before failure. • Silver Series X pumps ran over 1000 hours and still met new pump specs! • Silver Series XL • Ni-Resist • Cast Iron 50% 0% 63 150 300450600850 1000 HOURS Floating PTFE Coated Rotors • Floating rotor design and black PTFE coating on metal rotors increases performance and extends pump life • Standard production in 4001, 4101, 6500, & 7560 Silver Series XL and Ni-Resist pumps Clear Coat Finish • Offers increased protection from chemical attack and from the elements Floating Design, PTFE Coating • Included on all Ni-Resist roller pumpse Ni-Resist Pumps Roundup® is a registered trademark of Monsanto Co. 63 Pump Recommendations for Applications Which Roller Pump, Rollers and Seals Should You Use? Material options for rollers and seals are listed in the order of recommendations for usage. These recommendations are only a general guide. For suggestions on specific chemicals or applications, call Pentair’s Technical/Applications Department at (800) 445-8360. Suggestions Housing Materials Application Specific Chemicals Roller Materials Silver Series Ni-Resist Cast Iron XL X Poly Teflon® Rollers Rollers* X Viton® Buna-N Emulsions, soluble powders, sodium arsenate. X Chemicals containing glyphosate (such as Roundup®) or other acidics X INSECT CONTROL Emulsions not containing aromatic solvents. X X X X X BRUSH CONTROL Heavy-duty sprays using diesel oil for carrier. X X X X X PEST CONTROL CHEMICALS, FUMIGANTS, ETC. This category or use includes mosquito sprays, termite control liquids, nematocides, soil and grain fumigants where any of the following chemicals with aromatic solvents are present: Pentachlorophenol, xylene, xylol, benzene, high sulphur fuel or diesel oil. Fumigants containing: ethylene dichloride, ethylene dibromide, carbon tetrachloride, perchlorethylene, trighlorethylene, methyl bromide, and other aromatic solvents. X X X X X LIQUID FERTILIZERS Up to 32% nitrogen content, or others if the liquid is atmospheric pressure and the temperature is handled. X X POWDERED FERTILIZERS Fertilizers dissolved in water (greenhouse plant food). X X X X X X X PUMPING Large quantities of plain water. X X X X X X X SPRAYING Wettable powder sprays. X X X X X X X MATERIAL HANDLING Heavy abrasive powders in suspension. X X X X X X X ACIDS Mild sulfuric acid for spraying. Mild muriatic acid, inhibited muriatic, etc. X WEED CONTROL CHEMICALS X Super Roller Seal Materials X X X X* X X X X X* X *Note: Limit Pressure at 100 psi (6.9 bar) when using Teflon® Rollers. Teflon® is a registered trademark of E.I. DuPont de Nemours and Co. Hypro® is a registered trademark of Pentair. Roundup® is a registered trademark of Monsanto Company. Viton® is a registered trademark of DuPont. 64 ROLLER PUMPS Cast Iron, Ni-Resist or Silver Series XL Series 4001 4 Roller • Port size: 3⁄4" NPT • Max. fluid temperature: 140°F/60°C • Housing: Cast Iron (C), Ni-Resist (N) or Silvercast (XL) • Pump shaft rotation: Clockwise when looking at the shaft end (counter clockwise available) • Rollers: Super Rollers standard [Poly (T3) and Teflon® (T2)] • Shaft Seals: Viton® standard • Available shaft adapters: See page 72 Pressure in PSI and BAR 0 PSI 0 BAR 25 PSI 1.7 BAR 50 PSI 3.4 BAR 75 PSI 5.2 BAR 100 PSI 6.9 BAR 125 PSI 8.6 BAR 150 PSI 10.3 BAR GPM HP LPM HP @1100 RPM 5.5 .06 20.8 .06 4.9 .14 18.5 .14 4.4 .24 16.6 .24 4.1 .34 15.5 .34 3.8 .41 14.4 .41 3.5 .50 13.2 .50 3.3 .62 12.5 .62 GPM HP LPM HP @1400 RPM 7.1 .10 26.9 .10 6.4 .20 24.2 .20 5.9 .32 22.3 .32 5.6 .44 21.2 .44 5.3 .56 20.1 .56 5.0 .68 18.9 .68 4.8 .78 18.2 .78 GPM HP LPM HP @1800 RPM 9.1 .14 34.4 .14 8.5 .30 32.2 .30 8.0 .46 30.3 .46 7.6 .62 28.7 .62 7.3 .78 27.6 .78 7.0 .95 26.5 .95 6.7 1.1 25.4 1.1 • Special torque arm and base kit is available for gas engines • Rotor: Cast Iron, Ni-Resist or Silvercast • Weight: 5 lbs./2.3 kg Order Information Model Number Max GPM Max LPM Max PSI Max BAR Max RPM 4001C 4001C-H 4001 4001N-H 4001XL 4001XL-H 9.1 9.1 9.1 9.1 9.1 9.1 34.4 34.4 34.4 34.4 34.4 34.4 150 150 150 150 150 150 10.3 10.3 10.3 10.3 10.3 10.3 1800 1800 1800 1800 1800 1800 U.S 5⁄8” 1⁄2” 5⁄8” 1⁄2” 5⁄8” 1⁄2” Shaft Output Metric Shaft 15.9 mm solid 12.7 mm hollow 15.9 mm solid 12.7 mm hollow 15.9 mm solid 12.7 mm hollow Teflon® rollers - Add Suffix “T2” - (i.e.: 4001C-T2). Polypropylene rollers - Add Suffix “T3” - (i.e.: 4001C-T3). Reverse rotation* - Add Suffix “R” - (i.e.: 4001C-R). Cast Iron, Ni-Resist or Silver Series XL Series 4101 4 Roller • Port size: 3⁄4" NPT • Max. fluid temperature: 140°F/60°C • Housing: Cast Iron (C), Ni-Resist (N) or Silvercast (XL) • Pump shaft rotation: Clockwise when looking at the shaft end (counter clockwise available) • Rollers: Super Rollers standard [Poly (T3) and Teflon® (T2)] • Shaft Seals: Viton® standard • Available shaft adapters: See page 72 Pressure in PSI and BAR 0 PSI 0 BAR 25 PSI 1.7 BAR 50 PSI 3.4 BAR 75 PSI 5.2 BAR 100 PSI 6.9 BAR 125 PSI 8.6 BAR 150 PSI 10.3 BAR GPM HP LPM HP @1800 RPM 5.0 .11 18.9 .11 4.8 .21 18.1 .21 4.5 .34 17.0 .34 4.2 .45 15.9 .45 3.9 .56 14.8 .56 3.7 .68 14.0 .68 3.4 .78 12.9 .78 GPM HP LPM HP @2200 RPM 6.2 .14 23.5 .14 5.8 .27 21.9 .27 5.6 .40 21.2 .40 5.4 .55 20.4 .55 5.0 .68 18.9 .68 4.7 .82 17.8 .82 4.4 .96 16.6 .96 GPM HP LPM HP @2600 RPM 7.2 .16 27.3 .16 6.9 .30 26.1 .30 6.6 .46 25.0 .46 6.4 .62 24.2 .62 6.0 .76 22.7 .76 5.7 .92 21.6 .92 5.4 1.08 20.4 1.08 Teflon® is a registered trademark of E.I. DuPont de Nemours and Co. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. • Special torque arm and base kit is available for gas engines • Rotor: Cast Iron, Ni-Resist or Silvercast • Weight: 5 lbs./2.27 kg Order Information Model Number Max GPM Max LPM Max PSI Max BAR Max RPM 4101C 4101C-H 4101N 4101N-H 4101XL 4101XL-H 7.2 7.2 7.2 7.2 7.2 7.2 27.3 27.3 27.3 27.3 27.3 27.3 150 150 150 150 150 150 Teflon® rollers - Add Suffix “T2” - (i.e.: 4101C-T2). Polypropylene rollers - Add Suffix “T3” - (i.e.: 4101C-T3). Reverse rotation* -Add Suffix “R” - (i.e.: 4101C-R). 65 10.3 10.3 10.3 10.3 10.3 10.3 2600 2600 2600 2600 2600 2600 U.S 5⁄8” 1⁄2” 5⁄8” 1⁄2” 5⁄8” 1⁄2” Shaft Output Metric Shaft 15.9 mm solid 12.7 mm hollow 15.9 mm solid 12.7 mm hollow 15.9 mm solid 12.7 mm hollow Ni-Resist or Silver Series XL Series 4001 and 4101 12 volt DC 4 Roller • Super Rollers and Viton® seals standard • Locking collar and torque arm come in each package • Rotor: Ni-Resist (N) or Silvercast (XL) • Weight: 16-18 lbs./7.3-8.2 kg Note: A ll models come in either Ni-Resist or Silver Series XL housings. Order Information Model Number Max GPM Max LPM Max PSI Max BAR Max RPM 4001N-EH 4001N-E2H 4001XL-EH 4001XL-E2H 4101N-EH 4101N-E2H 4101XL-EH 4101XL-E2H 10.4 9.9 10.4 9.9 7.5 5.9 7.5 5.9 39.4 37.5 39.4 37.5 28.4 22.3 28.4 22.3 30 50 30 50 50 90 50 90 2.1 3.4 2.1 3.4 3.4 6.2 3.4 6.2 1900 1600 1900 1600 1900 1600 1900 1600 Series 4101-EH and 4101-E2H Model 4101N-EH & 4101XL-EH Volts PSI AMPS 0 10.0 5 11.3 10 12.5 15 13.7 20 15.1 12.0 25 16.7 (Battery) Engine Off 30 18.6 35 20.3 40 22.3 45 24.1 50 25.7 0 10.4 5 11.7 10 13.0 15 14.2 13.5 20 15.8 (Alternator) 25 17.4 Engine 30 19.6 Running 35 20.9 40 22.5 45 24.3 50 26.1 Series 4001-EH and 4001-E2H Teflon® rollers - Add Suffix “T2” - (i.e.: 4001N-EHT2). Polypropylene rollers - Add Suffix “T3” - (i.e.: 4001N-EHT3). Model 4001N-EH & 4001XL-EH Volts PSI AMPS 0 12.6 5 14.1 10 15.2 12.0 15 17.3 (Battery) Engine Off 20 19.7 25 22.1 30 24.8 0 13.4 5 14.8 13.5 10 16.2 (Alternator) 15 18.2 Engine 20 20.5 Running 25 22.5 30 24.9 Shaft Output Metric 12.7 mm 12.7 mm 12.7 mm 12.7 mm 12.7 mm 12.7 mm 12.7 mm 12.7 mm U.S 1⁄2” 1⁄2” 1⁄2” 1⁄2” 1⁄2” 1⁄2” 1⁄2” 1⁄2” Shaft hollow hollow hollow hollow hollow hollow hollow hollow Metric Units U.S. Units GPM 6.3 6.0 5.8 5.6 5.4 5.2 5.0 4.8 4.6 4.4 4.2 7.5 7.0 6.6 6.4 6.2 6.0 5.8 5.6 5.4 5.2 5.0 Model 4101N-E2H & 4101XL-E2H PSI AMPS GPM 0 ––– ––– 10 8.4 5.3 20 11.8 4.8 30 13.7 4.65 40 16.4 4.4 50 19.6 4.05 60 22.8 3.65 70 25.8 3.20 80 28.9 3.00 90 31.5 2.75 100 34.2 2.60 0 ––– ––– 10 9.1 5.9 20 11.2 5.6 30 13.9 5.25 40 16.9 5.0 50 19.5 4.7 60 22.7 4.35 70 25.7 4.0 80 29.2 3.6 90 31.9 3.4 100 34.8 3.2 Model 4101N-EH & 4101XL-EH Volts BAR AMPS 0 10.0 .3 11.3 .7 12.5 1.0 13.7 1.4 15.1 12.0 1.7 16.7 (Battery) Engine Off 2.1 18.6 2.4 20.3 2.8 22.3 3.1 24.1 3.4 25.7 0 10.4 .3 11.7 .7 13.0 1.0 14.2 13.5 1.4 15.8 (Alternator) 1.7 17.4 Engine 2.1 19.6 Running 2.4 20.9 2.8 22.5 3.1 24.3 3.4 26.1 GPM 9.0 8.3 8.1 7.8 7.2 6.7 6.2 10.4 9.9 9.4 8.9 8.5 8.2 7.7 Model 4001N-E2H & 4001XL-E2H PSI AMPS GPM 10 13.9 8.4 20 18.0 7.9 30 22.2 7.2 35 25.0 6.9 40 27.0 6.5 50 31.6 5.9 60 36.2 5.4 10 14.4 9.9 20 18.3 9.1 30 22.3 8.5 35 24.5 8.3 40 27.0 8.0 50 31.0 7.3 60 36.1 6.8 Model 4001N-EH & 4001XL-EH Volts BAR AMPS 0 12.6 .3 14.1 .7 15.2 12.0 1.0 17.3 (Battery) Engine 1.4 19.7 Off 1.7 22.1 2.1 24.8 0 13.4 .3 14.8 .7 16.2 13.5 1.0 18.2 (Alternator) Engine 1.4 20.5 Running 1.7 22.5 2.1 24.9 Teflon® is a registered trademark of E.I. DuPont de Nemours and Co. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 66 LPM 23.8 22.7 22.0 21.2 20.4 19.7 18.9 18.2 17.4 16.7 15.9 28.4 26.5 25.0 24.2 23.5 22.7 22.0 21.2 20.4 19.7 18.9 Model 4101N-E2H & 4101XL-E2H BAR AMPS LPM 0 ––– ––– .7 8.4 20.0 1.4 11.8 18.2 2.1 13.7 17.6 2.8 16.4 16.7 3.4 19.6 15.3 4.1 22.8 13.8 4.8 25.8 12.1 5.5 28.9 11.4 6.2 31.5 10.4 6.9 34.2 9.84 0 ––– ––– .7 9.1 22.3 1.4 11.2 21.2 2.1 13.9 19.9 2.8 16.9 18.9 3.4 19.5 17.8 4.1 22.7 16.5 4.8 25.7 15.1 5.5 29.2 13.6 6.2 31.9 12.9 6.9 34.8 12.1 LPM 34.1 31.4 30.7 29.5 27.3 25.4 23.5 39.4 37.5 35.6 33.7 32.2 31.0 29.1 Model 4001N-E2H & 4001XL-E2H BAR AMPS LPM .7 13.9 31.8 1.4 18.0 29.9 2.1 22.2 27.3 2.4 25.0 26.1 2.8 27.0 24.6 3.5 31.6 22.3 4.1 36.2 20.4 .7 14.4 37.5 1.4 18.3 34.4 2.1 22.3 32.2 2.4 24.5 31.4 2.8 27.0 30.3 3.5 31.0 27.6 4.1 36.1 25.7 ROLLER PUMPS Cast Iron, Ni-Resist or Silver Series XL Series 6500 6-Roller • Port size: 3⁄4" NPT • 1" hose barb inlet fitting for 1000 rpm operation • Max. fluid temperature: 140°F/60°C • Housing: Cast Iron (C), Ni-Resist (N) or Silvercast (XL) • Shaft rotation: Counter clockwise when lookng at the shaft end (clockwise available) • Rollers: Super Rollers standard [Poly (T3) and Teflon® (T2)] • Shaft Seals: Viton® standard GPM HP LPM HP @1000 RPM 18.2 .20 GPM HP LPM HP @1200 RPM 21.8 .30 • Available PTO adapters: See Page 72 0 PSI GPM HP LPM HP @540 RPM 9.7 .08 0 BAR 36.7 .08 68.9 .20 82.5 .30 50 PSI 8.0 .38 16.5 .71 20.1 .90 • Weight: 9 lbs./4.1 kg 3.4 BAR 30.3 .38 62.4 .71 76.1 .90 100 PSI 7.2 .68 15.4 1.26 19.1 1.51 6.9 BAR 27.3 .68 58.3 1.26 72.3 1.51 150 PSI 6.6 .97 14.7 1.80 18.2 2.14 10.3 BAR 25 .97 55.6 1.80 68.9 2.14 200 PSI 5.6 1.29 14.0 2.34 17.3 2.84 13.8 BAR 21.2 1.29 53 2.34 65.5 2.84 Pressure in PSI and BAR 250 PSI 4.9 1.65 13.4 2.91 16.5 3.48 17.2 BAR 18.5 1.65 50.7 2.91 62.4 3.48 300 PSI 4.3 1.91 12.7 3.47 15.7 4.17 20.7 BAR 16.3 1.91 48.1 3.47 59.4 4.17 • Recommended PTO torque arm kit 3430-0540 • Rotor: Cast Iron, Ni-Resist or Silvercast Order Information Model Number Max GPM Max LPM Max PSI Max BAR Max RPM 6500C 6500N 6500XL 21.8 21.8 21.8 82.5 82.5 82.5 300 300 300 Teflon® rollers - Add Suffix “T2” - (i.e.: 6500C-T2). Polypropylene rollers - Add Suffix “T3” - (i.e.: 6500C-T3) . Reverse rotation*- Add Suffix “R” - (i.e.: 6500C-R). 20.7 20.7 20.7 1200 1200 1200 Shaft Output U.S Metric Shaft 5⁄8” 15.9 mm solid 5⁄8” 15.9 mm solid 5⁄8” 15.9 mm solid Cast Iron, Ni-Resist or Silver Series XL Series 7560 8-Roller • Max. fluid temperature: 140°F/60°C • Port sizes: 3⁄4" NPT • 1" hose barb inlet fitting for 1000 rpm operation • Housing: Cast Iron (C), Ni-Resist (N) or Silvercast (XL) • Shaft rotation: Counter clockwise when looking at the shaft end (clockwise available) • Rollers: Super Rollers standard [Poly (T3) and Teflon® (T2)] • Shaft Seals: Viton® standard Pressure in PSI and BAR 0 PSI 0 BAR 50 PSI 3.4 BAR 100 PSI 6.9 BAR 150 PSI 10.3 BAR 200 PSI 13.8 BAR 250 PSI 17.2 BAR 300 PSI 20.7 BAR GPM HP LPM HP @540 RPM 12 .33 45.4 .33 11.1 .74 42 .74 10.3 1.25 39 1.25 9.5 1.77 36 1.77 8.6 2.26 32.5 2.26 7.0 2.78 29.5 2.78 7.1 3.3 26.9 3.3 GPM HP LPM HP @800 RPM 18.3 .89 69.3 .89 17.5 1.26 66.2 1.26 16.9 1.95 64 1.95 16.1 2.65 60.9 2.65 15.5 3.4 58.7 3.4 14.5 4.2 54.9 4.2 18.9 5.3 51.9 5.3 GPM HP LPM HP @1000 RPM 22.5 1.56 85.2 1.56 22 1.78 83.3 1.78 21.3 2.53 80.6 2.53 20.6 3.5 78 3.5 20 4.2 75.7 4.2 18.9 5.3 71.5 5.3 18.0 6.1 68.1 6.1 • Available PTO adapters: See Page 72 • Recommended PTO torque arm kit 3430-0540 • Rotor: Cast Iron, Ni-Resist or Silvercast • Weight: 13 lbs./5.89 kg Order Information Model Number Max GPM Max LPM Max PSI 7560C 7560N 7560XL 22.5 22.5 22.5 85.2 85.2 85.2 300 300 300 Teflon® rollers - Add Suffix “T2” - (i.e.: 7560C-T2). Polypropylene rollers - Add Suffix “T3” - (i.e.: 7560C-T3). Reverse rotation*- Add Suffix “R” - (i.e.: 7560C-R). Teflon® is a registered trademark of E.I. DuPont de Nemours and Co. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 67 Max BAR 26.7 26.7 26.7 Max RPM 1000 1000 1000 Shaft Output U.S Metric 15⁄16” 23.8 mm 15⁄16” 23.8 mm 15⁄16” 23.8 mm Shaft solid solid solid Hydraulically-Driven Cast Iron, Ni-Resist or Silver Series Series 7560-GM30, 7560-GM15 8-Roller • Hydraulic motor drive (for open center, closed center and load-sensing systems) • Max. fluid temperature: 140°F/60°C • Pump port size: 3⁄4" NPT • 1" hose barb inlet fitting for 1000 rpm operation • Housing: Cast Iron (C), Ni-Resist (N) or Silvercast (XL) • Rollers: Super Rollers standard [Poly (T3) and Teflon® (T2)] • Shaft Seals: Viton® standard • Rotor: Cast Iron, Ni-Resist or Silvercast • Motor port size: -10 SAE (7⁄8"- 14" UNF) Order Information Model Number Max GPM Max LPM Max PSI Max BAR Max RPM 1000 Motor Capacity Hydraulic Flow Max US Metric 12 gpm 45 lpm 7560C-GM30 20.8 78.7 300 20.7 7560N-GM30 20.8 78.7 300 20.7 1000 12 gpm 45 lpm 7560XL-GM30 20.8 78.7 300 20.7 1000 12 gpm 45 lpm 23 lpm 7560C-GM15 20.1 76.1 300 20.7 1000 6 gpm 7560N-GM15 20.1 76.1 300 20.7 1000 6 gpm 23 lpm 7560XL-GM15 20.1 76.1 300 20.7 1000 6 gpm 23 lpm Teflon® rollers - Add Suffix “T2” - (i.e.: 7560C-GM30-T2). Polypropylene rollers - Add Suffix “T3” - (i.e.: 7560C-GM30-T3). 7560C,N,XL-GM15 Hyd.GPM 3 4 5 6 0 PSI 10.6 14.1 17.4 20.8 25 PSI 9.4 13.1 16.6 20.1 50 PSI 8.5 12.0 15.7 19.4 75 PSI 7.7 11.3 15.0 18.6 GPM at 100 PSI 125 PSI 7.1 6.5 10.6 10.0 14.4 13.5 17.9 17.1 U.S. Units 150 PSI 5.8 9.3 13.2 16.5 200 PSI 4.8 8.3 11.8 14.9 250 PSI 3.2 6.9 10.3 13.3 7560C,N,XL-GM15 Hyd.LPM 11.4 15.1 18.9 22.7 0 Bar 40.1 53.4 65.9 78.7 1.7 Bar 35.6 49.6 62.8 76.1 3.5 Bar 32.2 45.4 59.4 73.4 5.2 Bar 29.1 42.8 56.8 70.4 6.9 Bar 26.9 40.1 54.5 67.8 LPM at 300 PSI 1.6 5.2 8.7 11.8 Metric Units 8.6 Bar 24.6 37.9 51.1 64.7 10.3 Bar 22.0 35.2 50.0 62.5 13.8 Bar 18.2 31.4 44.7 56.4 17.2 Bar 12.1 26.1 39.0 50.3 20.7 Bar 6.1 19.7 32.9 44.7 7560C,N,XL-GM30 Hyd. GPM 5 6 7 8 9 10 11 12 0 PSI 9.0 10.5 11.9 13.7 15.2 16.9 18.6 20.1 25 PSI 8.5 10.0 11.5 13.1 14.6 16.5 18.2 19.6 50 PSI 7.8 9.5 11.0 12.5 14.1 15.9 17.6 19.1 77 PSI 7.3 8.9 10.4 12.0 13.6 15.4 17.1 18.6 GPM at 100 PSI 125 PSI 6.7 6.1 8.4 7.8 9.9 9.4 11.5 10.9 13.1 12.6 14.9 14.3 16.6 16.1 18.1 17.6 U.S. Units 150 PSI 5.5 7.3 8.9 10.4 12.1 13.9 15.6 17.1 200 PSI 4.4 6.2 7.8 9.4 11.1 12.9 14.7 16.3 7560C,N,XL-GM30 Hyd. LPM 20 25 30 35 40 45 0 BAR 35.8 42.8 51.8 58.1 67.6 75.3 2 BAR 33.2 39.5 49.0 55.8 64.8 72.7 4 BAR 30.5 36.8 45.8 52.7 62.4 70.4 6 BAR 28.1 34.0 43.0 50.1 60.0 68.1 8 BAR 25.6 31.8 40.3 47.7 57.7 66.0 LPM at 10 BAR 23.4 29.2 37.9 45.5 55.8 63.8 Teflon® is a registered trademark of E.I. DuPont de Nemours and Co. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair Ltd. 68 250 PSI 3.3 5.2 6.8 8.4 10.0 11.9 13.8 15.3 300 PSI 2.2 4.1 5.7 7.3 9.1 11.0 12.9 14.5 Metric Units 12 BAR 20.9 26.2 35.3 43.1 53.4 61.8 14 BAR 18.5 23.7 33.3 40.9 51.3 59.8 16 BAR 15.8 21.6 31.1 38.8 48.8 57.8 18 BAR 12.6 18.9 28.9 36.3 46.6 55.7 20 BAR 10.0 16.4 26.2 33.5 44.1 53.3 ROLLER PUMPS Cast Iron, Ni-Resist or Silver Series XL Series 7700 7-Roller • Max. fluid temperature: 140°F/60°C • Port size: 3⁄4" NPT • Housing: Cast Iron (C), Ni-Resist (N) or Silvercast (XL) • Shaft rotation: Counter clockwise when looking at the shaft end (Clockwise available) • Rollers: Super Rollers standard [Poly (T3) and Teflon® (T2)] • Shaft Seals: Viton® standard • Available PTO adapters: See Page 72 • Recommended PTO torque arm kit 3430-0540 • Rotor: Cast Iron, Ni-Resist or Silvercast • Weight: 14 lbs./6.36 kg Pressure in PSI and BAR 0 PSI 0 BAR 50 PSI 3.4 BAR 100 PSI 6.9 BAR 150 PSI 10.3 BAR 200 PSI 13.8 BAR GPM HP LPM HP @540 RPM 14.2 .23 53.7 .23 12.9 .56 48.8 .56 11.9 1.10 45 1.10 11.2 1.64 42.4 1.64 10.3 2.22 39 2.22 GPM HP LPM HP @600 RPM 15.3 .28 57.9 .28 14.0 .62 53 .62 13.0 1.20 49.2 1.20 12.3 1.80 46.6 1.80 11.6 2.44 43.9 2.44 GPM HP LPM HP @800 RPM 22.1 .37 83.6 .37 20.7 .86 78.3 .86 19.5 1.66 73.8 1.66 18.6 2.40 70.4 2.40 17.8 3.26 67.4 3.26 Order Information Model Number Max GPM Max LPM Max PSI Max BAR Max RPM 7700C 7700N 7700XL 22.1 22.1 22.1 83.7 83.7 83.7 200 200 200 13.8 13.8 13.8 800 800 800 Shaft Output U.S Metric 15⁄16” 23.8 mm 15⁄16” 23.8 mm 15⁄16” 23.8 mm Shaft solid solid solid Teflon® rollers - Add Suffix “T2” - (i.e.: 7700C-T2). Polypropylene rollers - Add Suffix “T3” - (i.e.: 7700C-T3). Reverse rotation* - Add Suffix “R” - (i.e.: 7700C-R). Cast Iron, Ni-Resist or Silver Series XL Series 1700 5-Roller • Max. fluid temperature: 140°F/60°C • Port size: 1" NPT (BSP available on 1700C) • Housing: Cast Iron (C), Ni-Resist (N) or Silvercast (XL) • Shaft rotation: Counter clockwise when looking at the shaft end (Clockwise available) • Rollers: Super Rollers standard [Poly (T3) and Teflon® (T2) available] • Shaft Seals: Viton® standard • Available PTO adapters (forged steel recommended): See Page 72 Pressure in PSI and BAR 0 PSI 0 BAR 50 PSI 3.4 BAR 100 PSI 6.9 BAR 150 PSI 10.3 BAR 200 PSI 13.8 BAR GPM HP LPM HP @540 RPM 25.0 2.7 94.6 2.7 21.0 1.18 79.5 1.18 19.0 2.13 71.9 2.13 17.0 2.89 64.3 2.89 15.0 3.85 56.8 3.85 GPM HP LPM HP @600 RPM 28.0 .34 106 .34 24.5 1.39 92.7 1.39 22.0 2.36 83.3 2.36 20.0 3.34 75.7 3.34 18.0 4.39 681 4.39 GPM HP LPM HP @1000 RPM 45.0 1.42 170 1.42 43.0 3.0 163 3.0 41.0 4.67 155 4.67 39.0 6.07 148 6.07 –––– –––– –––– –––– Teflon® is a registered trademark of E.I. DuPont de Nemours and Co. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. • Recommended PTO torque arm kit 3430-0540 • Rotor: Cast Iron, Ni-Resist or Silvercast • Weight: 19 lbs./8.6 kg Order Information Model Number Max GPM Max LPM Max PSI Max BAR Max RPM 1700C* 1700N 1700XL 45 45 45 170 170 170 200 200 200 * BSP Version - 1700C-BT Teflon® rollers - Add Suffix “T2” - (i.e.: 1700C-T2). Polypropylene rollers - Add Suffix “T3” - (i.e.: 1700C-T3). Reverse rotation*- Add Suffix “R” - (i.e.: 1700C-R). 69 13.8 13.8 13.8 1000 1000 1000 Shaft Output U.S Metric 15⁄16” 23.8 mm 15⁄16” 23.8 mm 15⁄16” 23.8 mm Shaft solid solid solid Cast Iron, Ni-Resist or Silver Series XL Series 1502 6-Roller • Max. fluid temperature: 140°F/60°C • Port size: 1-1⁄2" NPT (BSP available on 1502C) • Housing: Cast Iron (C), Ni-Resist (N) or Silvercast (XL) • Shaft rotation: Counter clockwise when looking at the shaft end (Clockwise available) • Rollers: Super rollers standard [Poly (T3) available] • Shaft Seals: Buna-N standard on Cast Iron and Ni-Resist [Viton (Q) available]; Viton® standard on Silver Series XL • Available PTO adapters (forged steel recommended): See Page 72 • Recommended PTO Torque Arm Kit 3430-0540 • Rotor: Cast Iron, Ni-Resist or Silvercast • Weight: 30 lbs./13.6 kg Pressure in PSI and BAR 0 PSI 0 BAR 25 PSI 1.7 BAR 50 PSI 3.4 BAR 100 PSI 6.9 BAR 150 PSI 10.3 BAR GPM HP LPM HP @540 RPM 33.1 .51 125 .51 29.7 1.02 112 1.02 27.8 1.45 105 1.45 24.3 2.46 92 2.46 21.0 3.54 79.5 3.54 GPM HP LPM HP @600 RPM 36.8 .66 139 .66 33.6 1.15 127 1.15 31.7 1.68 120 1.68 28.3 2.78 107 2.78 25.0 3.95 94.6 3.95 GPM HP LPM HP @1000 RPM 62.1 2.02 235 2.02 58.5 3.04 221 3.04 56.9 3.69 215 3.69 53.9 5.31 204 5.31 50.9 7.12 193 7.12 Order Information Model Number Max GPM Max LPM Max PSI Max BAR Max RPM 1502C* 1502N 1502XL 62 62 62 235 235 235 200 200 200 13.8 13.8 13.8 1000 1000 1000 Shaft Output U.S Metric 15⁄16” 23.8 mm 15⁄16” 23.8 mm 15⁄16” 23.8 mm Shaft solid solid solid *BSP Version - 1502C-BT Teflon® rollers - Add Suffix “T2” - (i.e.: 1502C-T2). Polypropylene rollers - Add Suffix “T3” - (i.e.: 1502C-T3). Reverse rotation* - Add Suffix “R” - (i.e.: 1502C-R). Cast Iron or Silver Series XL, Gas Engine Driven Models: 4101C-25, 4101XL-25 • 2.5 HP PowerPro Engine (CARB/EPA approved) • Port size: 3⁄4" NPT • Housing: Cast Iron (C) or Silvercast (XL) • Rollers: Super rollers standard [Poly (T3) and Teflon® (T2)] • Shaft Seals: Viton® standard • Rotor: Cast Iron (C) or Silvercast (XL) • Weight: 29 lbs./13.1 kg Pressure in PSI and BAR BAR 0 PSI 0 BAR 50 PSI 3.4 BAR 100 PSI 6.9 BAR 150 PSI 10.3 BAR Order Information GPM LPM 8.9 34 8.6 33 8.3 31 8.0 30 Teflon® is a registered trademark of E.I. DuPont de Nemours and Co. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 70 Model Number Max GPM Max LPM Max PSI Max BAR Engine Mfgr. & HP 4101C-25 8.9 34.7 4101XL-25 8.9 34.7 100 6.9 PowerPro 2.5 hp 150 10.3 PowerPro 2.5 hp Roller Pump Accessory Selection Guide Description Series 1500 Series 1700 Series 6500 Series 7560 Series 7700 Series 4000 Series 5200 540 rpm 1-3⁄8" Forged Steel PTO Adapter 1000 rpm 1-3⁄8" Forged Steel PTO Adapter 1000 rpm 1-3⁄4" Forged Steel PTO Adapter 540 rpm 1-3⁄8" Forged Steel Quick Coupler 1000 rpm 1-3⁄8" Forged Steel Quick Coupler Multi-Speed 1-3⁄8" Forged Steel Quick Coupler Steel Shaft Adapter 3⁄4" x 5⁄8 Steel Shaft Adapter 5⁄8" x 5⁄8 1320-0076 1320-0078 1320-0080 1323-0072 1323-0073 1323-0076 ––––––– ––––––– 1320-0077 1320-0079 ––––––– 1323-0074 1323-0075 1323-0077 1320-0015 1320-0016 1320-0076 1320-0078 1320-0080 1323-0072 1323-0073 1323-0076 ––––––– ––––––– 1320-0076 ––––––– ––––––– 1323-0072 ––––––– 1323-0076 ––––––– ––––––– ––––––– 1320-0079 ––––––– ––––––– ––––––– 1323-0077 1320-0015 1320-0016 1320-0081 ––––––– ––––––– ––––––– ––––––– ––––––– ––––––– ––––––– 3430-0437 3430-0380 3430-0381 3430-0384 3430-0390 ––––––– Torque Arm Kit 1320-0076 1320-0078 1320-0080 1323-0072 1323-0073 1323-0076 ––––––– ––––––– 3430-0387 3430-0386 ––––––– 3430-0540 3430-0540 3430-0540 3430-0540 ––––––– Base Kits 3420-0004 3420-0010 3420-0023 3420-0003 3420-0010 Hydraulic Flange Kit ––––––– ––––––– ––––––– 3430-0636 ––––––– ––––––– 3420-0024* 3420-0025** ––––––– Repair Kits ––––––– ––––––– * For electric motor drive 3 1⁄2" shaft centerline (4001, 4101). ** For gas engine drive 43⁄16" shaft centerline (4101 only). Roller Repair Kits Estimated Weight Ea. US Units Metric Units 1 lb. 7 oz. 652 g Kit Number Pump Series Description 3430-0387 1502C and 1502N Roller kit includes: 6 Super Rollers, 1 o-ring gasket, and 2 Buna-N seals 3430-0386 1502XL Roller kit includes: 6 Super Rollers, 1 o-ring gasket, and 2 Viton® seals 1 lb. 8 oz. 680 g 3430-0437 1700 Roller kit includes: 5 Super Rollers, 1 o-ring gasket, and 2 Viton® seals 1 lb. 5 oz. 595 g 3430-0380 6500 Roller kit includes: 6 Super Rollers, 1 o-ring gasket, and 2 Viton® seals 8 oz. 227 g 3430-0381 7560⁄7700 Roller kit includes: 8 Super Rollers, 1 o-ring gasket, and 2 Viton® seals 12 oz. 340 g 3430-0390 4001⁄4101 Roller kit includes: 4 Super Rollers, 1 o-ring gasket, and 2 Viton® seals 3 oz. 85 g Kit Number Pump Series Description 3420-0025 4101 3420-0024 4001⁄4101 3420-0023 3420-0003 3420-0010 3420-0004 6500 7560 7700⁄1700 1500 Base Kits Base kit for mounting to gas engine, 4-3⁄16" shaft centerline. Base kit includes: 1 Base, 2 Bolts and 2 Lock washers Base kit for mounting to an electric motor, 3-1⁄2" shaft centerline. Base kit includes: 1 Base, 2 Bolts and 2 Lock washers Base kit includes: 1 Base, 2 Bolts and 2 Lock washers Base kit includes: 1 Base, 3 Bolts and 3 Lock washers Base kit includes: 1 Base and 4 Bolts Base kit includes: 1 Base and 4 Bolts Estimated Weight Ea. US Units Metric Units 12 oz. 340 g 7 oz. 198 g 12 oz. 1 lb. 10 oz. 14 oz. 6 lbs. 340 g 737 g 397 g 2.7 kg Roller Pump Repair Tools and Tool Kits Kit Number Pump Series Description 3011-0006 6500 Tool Kit 3011-0021 4001/4101 Tool Kit 3010-0001† 1700, 6500, 7560, 7700 Support fixture 3010-0002† 1700, 6500, 7560, 7700 Support fixture 3010-0003† 4001/4101, 6500 Bearing and seal assembly tool 3010-0004† 4001/4101, 6500 Bearing disassembly tool 3010-0005 1500, 1700, 7560, 7700 Bearing and seal assembly tool Bearing disassembly tool 3010-0006 1500, 1700, 7560, 7700 3010-0010*† 4001/4101, 6500 Bearing support tool 3010-0014*† 4001/4101, 6500 Bearing race support tool Bearing support tool 3010-0020 1500, 1700, 7560, 7700 3010-0066*† 1500, 1700, 4001/4101, 6500, 7560, 7700 Wire brush 3010-0067*† 1500, 1700, 4001/4101, 6500, 7560, 7700 Wire brush holder 3010-0068*† 1500, 1700, 4001/4101, 6500, 7560, 7700 Tool Box 3020-0009*† 1500, 1700, 4001/4101, 6500, 7560, 7700 Allen wrench; 1/16" hex * Included in 3011-0006 - Tool kit for 6500 series roller pumps. † Included in 3011-0021 - Tool kit for 4001/4101 series roller pumps. 71 ROLLER PUMPS Roller Pump Kits & Accessories Roller Pump Kits & Accessories PTO and Shaft Adapters (Female to Female) US Metric US Metric PTO (I.D.) PTO (I.D.) Pump End (I.D.) Pump End (I.D.) 3⁄4" 19 mm 5⁄8" 19 mm 1320-0016 5⁄8" 15.9 mm 5⁄8" 1320-0054 3/4" 19 mm 15/16" 1320-0076 1-3⁄8" (6 spline) 34.9 mm (6 spline) 15⁄16" Part Number 1320-0015 Material RPM Pump Model steel * 4000, 6500 15.9 mm steel * 4000, 6500 23.8 mm die cast * 1500, 1700, 7560, 7700 23.8 mm forged steel 540 1500, 1700, 7560, 7700 1320-0077 1-3⁄8" (6 spline) 34.9 mm (6 spline) 5⁄8 34.9 mm forged steel 540 6500 1320-0078 1-3⁄8" (21 spline) 34.9 mm (21 spline) 15⁄16" 23.8 mm forged steel 1000 1500, 1700, 7560 1320-0079 1-3⁄8" (21 spline) 34.9 mm (21 spline) 5⁄8" 34.9 mm forged steel 1000 4000, 6500 1320-0080 1-3⁄4" (20 spline) 44.5 mm (20 spline) 15⁄16" 23.8 mm forged steel 1000 1500, 1700, 7560 1320-0081 1-3⁄8" (6 spline) 34.9 mm (6 spline) 1" 34.9 mm forged steel 540 5200 1320-0082 1-1/2" (8 spline) 38 mm (8 spline) 15/16" 23.8 mm forged steel 1000 1500, 1700, 7560 1320-0083 1-1/2" (8 spline) 38 mm (8 spline) 5/8" 34.9 mm forged steel 1000 4000, 6500 * Refer to recommended pump rpm. Quick Couplers (Female to Female) PTO (I.D.) Part Number US Pump End (I.D.) Metric US Metric Material RPM Pump Model 1323-0072 1-3⁄8" (6 spline) 34.9 mm (6 spline) 15⁄16 23.8 mm forged steel 540 1500,1700, 7560, 7700 1323-0073 1-3⁄8" (21 spline) 34.9 mm (21 spline) 15⁄16" 23.8 mm forged steel 1000 1500, 1700, 7560 1323-0074 1-3⁄8" (6 spline) 34.9 mm (6 spline) 5⁄8" 15.9 mm forged steel 540 6500 1323-0075 1-3⁄8" (21 spline) 34.9 mm (21 spline) 5⁄8" 15.9 mm forged steel 1000 4000, 6500 1323-0076* 1-3⁄8" (multi-speed) 34.9 mm (multi-speed) 15⁄16" 23.8 mm forged steel 540⁄1000 1500, 1700, 7560, 7700 1323-0077* 1-3⁄8" (multi-speed) 34.9 mm (multi-speed) 5⁄8" 15.9 mm forged steel 540⁄1000 4000, 6500 1323-0078 1-1/2" (8 spline) 38 mm (8 spline) 5/8" 15.9 mm forged steel 1000 4000, 6500 1323-0079 1-1/2" (8 spline) 38 mm (8 spline) 15/16" 23.8 mm forged steel 1000 1500, 1700, 7560 * Multi-speed couplers are compatable with both 6 and 21 spline PTO shafts. Torque Arm Kit (pump not included) Part Number Material RPM For Pump Series 3430-0540 steel 540/1000 1502, 1700, 6500, 7560, and 7700 72 Estimated Weight Each US Units Metric 2 lbs. 4 oz. 1.02 kg ROLLER PUMPS Other Pump Accessories Couplers Series 2738 (2.0 hp limit)* Replaces L-075 Inches mm 1/8” 3/16” 1/4” 1/2” 5/8” 3/4” 7/8” 3.2 mm 4.7 mm 6.4 mm 13 mm 15.9 mm 19 mm 22.2 mm 15/16” 1” 1-1/8” 23.8 mm 25.4 mm 28.6 mm Note: These couplers are designed for inch dimensional shafts and keys. Metric dimensions are for reference only (except for 2739-1009). 2739 (5.0 hp limit)* Replaces L-095 2741 (10.5 hp limit)* Replaces L-100 2740 (18.0 hp limit)* Replaces L-110 Part Number Description 2738-1001 2738-1002 2738-1003 2738-1004 2728-1001 2739-1001 2739-1002 Estimated Weight Each US Units Metric 1⁄2” coupling end, with 1⁄8” keyway 5⁄8” coupling end, with 3⁄16” keyway 3⁄4” coupling end, with 3⁄16” keyway 7⁄8” coupling end, with 3⁄16” keyway Center disc 5⁄8” coupling end, with 3⁄16” keyway 3⁄4” coupling end, with 3⁄16” keyway 6 oz. 6 oz. 6 oz. 6 oz. 1 oz. 11 oz. 11 oz. 170 g 170 g 170 g 170 g 28 g 312 g 312 g 2739-1003 2739-1004 2739-1005 2739-1006 2739-1009 2729-1001 7⁄8” coupling end, with 3⁄16” keyway 15⁄16” coupling end, with 1⁄4” keyway 1” coupling end, with 1⁄4” keyway 1-1⁄8” coupling end, with 1⁄4” keyway 24 mm coupling end, with 8mm keyway Center disc 11 oz. 11 oz. 11 oz. 11 oz. 11 oz. 1 oz. 312 g 312 g 312 g 312 g 312 g 28 g 2729-1005 2741-1001 2741-1004 2741-1002 2741-1005 2741-1007 2741-1003 2729-1002 2729-1006 2740-1001 Heavy-duty center disc, urethane material 3⁄4” coupling end, with 3⁄16” keyway 15⁄16” coupling end, with 1⁄4” keyway 1” coupling end, with 1⁄4” keyway 1-1⁄4” coupling end, with 1⁄4” keyway 1-3⁄8” coupling end, with 5⁄16” keyway 1-1⁄8” coupling end, with 1⁄4” keyway Center disc heavy-duty center disc, urethane material 3⁄4” coupling end, with 3⁄16” keyway 1 oz. 1 lb. 5 oz. 1 lb. 5 oz. 1 lb. 5 oz. 1 lb. 5 oz. 1 lb. 5 oz. 1 lb. 5 oz. 1 oz. 1 oz. 3 lbs. 11 oz. 28 g 595 g 595 g 595 g 595 g 595 g 595 g 28 g 28g 1.67 kg 2740-1002 2740-1005 2740-1007 2729-1003 1” coupling end, with 1⁄4” keyway 1-3⁄8” coupling end, with 5⁄16” keyway 1-1⁄8” coupling end, with 1⁄4” keyway Center disc 3 lbs. 8 oz. 3 lbs. 2 lbs. 15 oz. 3 oz. 1.59 kg 1.4 kg 1.33 kg 85 g * HP limit is electric motor hp at 1725 rpm for driving a steady uniform load. For an uneven load, stop-start and moderate shock loads, divide hp by a 1.5 service factor. Ordering Instructions: To order one 1⁄2” x 3⁄4” Series 2738 coupling, specify the following: Note: It is not necessary to order in complete sets, parts can be ordered individually. Quantity Part Number Description 1 2738-1001 1⁄2” coupling end 1 2738-1003 3⁄4” coupling end 1 2728-1001 Center disc Relief Valves Estimated Weight Each Part Number Ports-NPT Inlet (M) Oultet (F) Max. PSI Max. BAR Body Material Valve Material 3300-0002 1⁄2” M x 1⁄2” F 200 14 cast bronze stainless steel ball 3300-0001 3⁄4” M x 3⁄4” F 400 28 cast bronze stainless steel ball 1 lb. 1 oz. 482 g 3301-0001 3⁄4” M x 3⁄4” F 400 28 cast bronze flat neoprene 1 lb. 2 oz. 510 g 3300-0093 3⁄4” M x 3⁄4” F 300 20 cast bronze stainless steel ball 1 lb. 2 oz. 510 g 3300-0094 1” M x 3⁄4” F 150 10 cast bronze stainless steel ball 1 lb. 4 oz. 567 g 3316-0002 1-1⁄4” 200 14 cast iron stainless steel cone 2 lbs. 14 oz. 1.3 kg 3300-0015 3⁄4” M - 3⁄4” F 150 10 nylon nylon 6 oz. 170 g 3300-0016 3⁄4” M - 3⁄4” F 250 17 nylon nylon 6 oz. 170 g 3300-0098 3⁄4” M - 3⁄4” F 400 28 nylon nylon 6 oz. 170 g 73 US Units Metric 10 oz. 283 g Poly Diaphragm Pump Series Series 9910-DP423, DP573, and DP763 • Glass-filled polypropylene construction of head, manifold and control components for the maximum in chemical resistance • Flow rate up to 11.5 gpm (43.3 lpm), 15.6 gpm (59 lpm) and 20.2 gpm (76.5 lpm) pressure up to 290 psi (20 bar) • 3 cylinder design eliminates the need for pulsation dampening devices and lengthens the life of the entire pumping system • Kynar™ and 300 series stainless steel valve design for higher flow and better corrosion resistance • The external inlet and outlet manifold design vs. an internal manifold design allows for easy valve replacement and lower cost repairs Order Information Model Number Max GPM Max LPM Max PSI Max BAR Port Size Description 1 1/4" Inlet 1" Outlet Poly Diaphragm Pump with Gearbox and Control Unit 1 1/2" Inlet 1" outlet Poly Diaphragm Pump with Gearbox and Control Unit 1 1/2" Inlet 1" outlet Poly Diaphragm Pump with Gearbox and Control Unit 9910-DP423 11.5 43.3 290 20 9910-DP423GRGI 11.5 43.3 290 20 9910-DP573 15.6 59.1 290 20 9910-DP573GRGI 15.6 59.1 290 20 9910-DP763 20.2 76.4 290 20 9910-DP763GRGI 20.2 76.4 290 20 Poly Diaphragm Pump Poly Diaphragm Pump Poly Diaphragm Pump 9910-GS25 Control Unit (DP 423) 9910-GS35S Control Unit (DP573 & DP763) DP423 Pressure in PSI and BAR GPM HP LPM HP @350 RPM GPM HP LPM HP @400 RPM GPM HP LPM HP @450 RPM GPM HP LPM HP @500 RPM DP573 GPM HP LPM HP @550 RPM Pressure in PSI and BAR GPM HP LPM HP @350 RPM GPM HP LPM HP @400 RPM GPM HP LPM HP @450 RPM GPM HP LPM HP @500 RPM GPM HP LPM HP @550 RPM 0 PSI 7.5 0.18 8.5 0.20 9.4 0.29 10.5 0.35 11.5 0.42 0 PSI 10.4 0.14 11.7 0.17 13.0 0.24 14.3 0.32 15.6 0.43 0 BAR 28.3 0.18 32.2 0.20 35.6 0.29 39.5 0.35 43.3 0.42 0 BAR 39.5 0.10 44.3 0.13 49.1 0.18 54.3 0.24 59.1 0.32 72 PSI 7.3 0.46 8.3 0.53 9.2 0.61 10.2 0.68 11.0 0.77 72 PSI 10.3 0.54 11.6 0.62 12.6 0.67 14.2 0.77 15.5 0.83 5 BAR 27.4 0.46 31.2 0.53 34.6 0.61 38.5 0.68 41.5 0.77 5 BAR 39.0 0.40 43.8 0.46 47.7 0.50 53.9 0.57 58.6 0.62 145 PSI 7.2 0.77 8.2 0.87 9.1 0.98 10.1 1.11 11.0 1.21 145 PSI 10.1 0.95 11.4 1.09 12.6 1.22 14.1 1.28 15.2 1.41 10 BAR 27.3 0.77 31.1 0.87 34.5 0.98 38.2 1.11 41.4 1.21 10 BAR 38.4 0.71 43.0 0.81 47.6 0.91 53.3 0.95 57.5 1.05 217 PSI 7.0 1.06 8.1 1.21 9.1 1.37 10.0 1.51 10.8 1.68 217 PSI 9.9 1.33 11.1 1.50 12.5 1.71 13.9 1.89 14.9 2.07 15 BAR 26.5 1.06 30.5 1.21 34.5 1.37 37.7 1.51 40.7 1.68 15 BAR 37.3 0.99 41.9 1.12 47.4 1.28 52.7 1.41 56.4 1.54 290 PSI 6.9 1.33 7.8 1.53 9.1 1.74 9.8 1.93 10.6 2.14 290 PSI 9.7 1.60 10.8 1.88 12.5 2.14 13.8 2.43 14.8 2.64 20 BAR 26.0 1.33 29.5 1.53 34.2 1.74 37.0 1.93 40.1 2.14 20 BAR 36.8 1.19 40.9 1.40 47.3 1.60 52.3 1.81 56.1 1.97 DP763 Pressure in PSI and BAR GPM HP LPM HP @350 RPM GPM HP LPM HP @400 RPM GPM HP LPM HP @450 RPM GPM HP LPM HP @500 RPM GPM HP LPM HP @550 RPM 0 PSI 13.7 0.20 15.3 0.29 17.1 0.39 18.8 0.51 20.2 0.63 0 BAR 51.8 0.15 57.8 0.22 64.9 0.29 71.0 0.38 76.4 0.47 72 PSI 13.4 0.71 15.2 0.77 16.8 0.90 18.4 0.98 20.1 1.11 5 BAR 50.9 0.53 57.6 0.57 63.5 0.67 69.8 0.73 76.0 0.83 145 PSI 13.3 1.21 15.0 1.39 16.7 1.58 18.4 1.76 19.9 1.93 10 BAR 50.5 0.90 56.8 1.04 63.4 1.18 69.7 1.31 75.4 1.44 217 PSI 12.8 1.76 14.9 2.02 16.7 2.25 18.1 2.50 19.5 2.75 15 BAR 48.5 1.31 56.3 1.51 63.1 1.68 68.6 1.86 73.9 2.05 290 PSI 12.7 2.12 14.6 2.49 16.5 2.77 18.0 3.12 19.4 3.45 20 BAR 48.0 1.58 55.4 1.86 62.3 2.07 68.2 2.33 73.4 2.57 Kynar™ is a registered trademark of Arkema, Inc. Hypro® is a registered trademark of Pentair. 74 DIAPHRAGM PUMPS Low Pressure, 2 Diaphragm Model 9910-D70 and D70GR • Max. fluid temperature: 140°F/60°C • Port sizes: 1-1⁄4" inlet, 1" outlet, hose barb • Diaphragms: 2, semi-hydraulic, Desmopan standard,Buna available ® • Housing components for liquid handling: epoxy-coated • Pump shaft rotation: CW and CCW • For shaft kits and other drive options, see pages 86-87. • Recommended control unit: 3300-0087 or 3300-0088, see page 88. • Weight: 22 lbs./10 kg (D70); 31 lbs./14 kg (D70GR) Pressure in PSI and BAR 0 PSI 0 BAR 72 PSI 5 BAR 145 PSI 10 BAR 217 PSI 15 BAR 290 PSI 20 BAR GPM HP LPM HP @350 RPM 13.6 0.33 51.2 0.33 11.2 0.73 42.3 0.73 11.0 1.20 41.4 1.20 10.7 1.71 40.4 1.71 10.6 2.18 40.0 2.18 GPM HP LPM HP @400 RPM 15.1 0.40 57.1 0.40 12.7 0.79 47.9 0.79 12.4 1.39 46.9 1.39 12.3 2.10 46.3 2.10 12.1 2.46 45.7 2.46 GPM HP LPM HP @450 RPM 16.9 0.48 63.7 0.48 14.1 0.91 53.2 0.91 13.9 1.63 52.6 1.63 13.8 2.19 52.2 2.19 13.7 2.77 51.8 2.77 GPM HP LPM HP @500 RPM 18.4 0.58 69.4 0.58 15.6 1.01 58.8 1.01 15.2 1.66 57.3 1.66 15.1 2.36 57.1 2.36 15.0 3.12 56.7 3.12 GPM HP LPM HP @550 RPM 19.6 0.80 74.1 0.80 17.0 1.09 64.3 1.09 16.6 1.91 62.7 1.91 16.3 2.63 61.6 2.63 16.1 3.39 60.6 3.39 Order Information Model Number Max GPM Max LPM Max PSI Max BAR Max RPM Shaft Output 9910-D70 19.6 74.2 290 20 550 Select shaft kit for desired drive 9910-D70GR 19.6 74.2 290 20 3600 3⁄4" hollow shaft w/ gear reduction for 5 hp gas engine All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. Low Pressure, 3 Diaphragm Model 9910-D115 and D115GR34 • Max. fluid temperature: 140°F/60°C • Port sizes: 1-1⁄2" inlet, 1" outlet, hose barb • Diaphragms: 3, semi-hydraulic, Desmopan standard,Buna available ® • Housing components for liquid handling: epoxy-coated • Pump shaft rotation: CW and CCW • For shaft kits and other drive options, see pages 86-87. • Recommended control unit: 3300-0087 or 3300-0088, see page 88. • Weight: 35 lbs./15.9 kg (D115); 44 lbs. /20 kg (D115GR34) Order Information Pressure in PSI and BAR 0 PSI 0 BAR 72 PSI 5 BAR 145 PSI 10 BAR 217 PSI 15 BAR 290 PSI 20 BAR GPM HP LPM HP @350 RPM 18.9 0.33 71.5 0.33 18.6 1.13 70.0 1.13 18.3 1.89 69.0 1.89 18.2 2.72 68.6 2.72 18.0 3.45 68.0 3.45 GPM HP LPM HP @400 RPM 21.4 0.40 80.9 0.40 20.7 1.18 78.2 1.18 20.5 2.13 77.4 2.13 20.4 3.11 77.0 3.11 20.3 3.98 76.7 3.98 GPM HP LPM HP @450 RPM 23.9 0.45 90.1 0.45 23.4 1.40 88.5 1.40 23.2 2.47 87.5 2.47 23.1 3.51 87.0 3.51 22.9 4.54 86.2 4.54 GPM HP LPM HP @500 RPM 26.4 0.69 99.7 0.69 25.5 1.62 96.1 1.62 25.3 2.82 95.6 2.82 25.1 3.88 94.7 3.88 25.0 5.09 94.2 5.09 GPM HP LPM HP @550 RPM 28.6 0.91 107.9 0.91 27.9 1.83 105.3 1.83 27.7 2.99 104.4 2.99 27.6 4.33 104.0 4.33 27.5 5.51 103.8 5.51 Model Number Max LPM Max PSI Max BAR Max RPM Shaft Output 9910-D115 28.6 108.3 290 20 550 Select shaft kit for desired drive 9910-D115GR34 28.6 108.3 290 20 3600 3⁄4" hollow shaft w/ gear reduction for 5 hp gas engine All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. Desmopan® is a registered trademark of Bayer Aktiengesellschaft, Farbenfabriken. Hypro® is a registered trademark of Pentair. 75 Max GPM Low Pressure, 3 Diaphragm Model 9910-D135 • Max. fluid temperature: 140°F/60°C • Port sizes: 1-1⁄2" inlet, 1" outlet, hose barb • Diaphragms: 3, semi-hydraulic, Desmopan standard, Buna available ® • Housing components for liquid handling: epoxy-coated • Pump shaft rotation: CW and CCW • Recommended control unit: 3300-0087 or 3300-0088, see page 88. • Weight: 38 lbs./17.2 kg Pressure in PSI and BAR 0 PSI 0 BAR 72 PSI 5 BAR 145 PSI 10 BAR 217 PSI 15 BAR 290 PSI 20 BAR GPM HP LPM HP @350 RPM 22.6 0.51 85.4 0.51 22.2 1.31 83.8 1.31 22.1 2.29 83.4 2.29 22.0 3.21 83.0 3.21 21.7 4.23 81.9 4.23 GPM HP LPM HP @400 RPM 25.8 0.69 97.3 0.69 25.3 1.64 95.6 1.64 25.2 2.65 95.2 2.65 25.1 3.80 94.6 3.80 24.8 4.88 93.4 4.88 GPM HP LPM HP @450 RPM 28.8 0.92 108.8 0.92 28.3 1.84 106.7 1.84 28.2 2.97 106.3 2.97 28.0 4.31 105.7 4.31 27.9 5.45 105.3 5.45 GPM HP LPM HP @500 RPM 31.5 1.22 118.8 1.22 31.2 2.09 117.6 2.09 31.1 3.45 117.2 3.45 30.8 4.80 116.3 4.80 30.7 6.21 115.7 6.21 GPM HP LPM HP @550 RPM 33.9 1.45 128.0 1.45 33.3 2.44 125.8 2.44 33.2 3.88 125.3 3.88 33.1 5.32 124.9 5.32 33.0 6.84 124.6 6.84 Order Information Model Max Max Max Number GPM LPM PSI 9910-D135 33.9 128.3 290 Max BAR 20 Max RPM 550 Shaft Output 1-3⁄8"- 6 splined male shaft All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. Low Pressure, 4 Diaphragm Model 9910-D160 • Max. fluid temperature: 140°F/60°C • Port sizes: 2" inlet, 1-1⁄2" outlet, hose barb • Diaphragms: 4, semi-hydraulic, Desmopan standard, Buna available ® • Housing components for liquid handling: epoxy-coated • Pump shaft rotation: CW and CCW • For hydraulic drive adaption, see page 87. • Recommended control unit: 3300-0087 or 3300-0088, see page 88. • Weight: 66 lbs./30 kg Pressure in PSI and BAR 0 PSI 0 BAR 72 PSI 5 BAR 145 PSI 10 BAR 217 PSI 15 BAR 290 PSI 20 BAR GPM HP LPM HP @350 RPM 27.9 0.61 105.3 0.61 26.4 1.51 99.7 1.51 25.4 2.48 95.7 2.48 24.3 3.45 91.8 3.45 23.6 4.50 89.1 4.50 GPM HP LPM HP @400 RPM 32.1 0.80 121.0 0.80 30.0 1.73 113.1 1.73 28.7 2.91 108.5 2.91 27.7 4.06 104.5 4.06 26.9 5.18 101.6 5.18 GPM HP LPM HP @450 RPM 35.1 1.03 132.3 1.03 33.6 2.01 127.0 2.01 32.6 3.28 122.9 3.28 31.0 4.58 117.0 4.58 30.2 5.86 114.1 5.86 GPM HP LPM HP @500 RPM 38.9 1.33 146.6 1.33 37.1 2.18 139.9 2.18 35.7 3.74 134.8 3.74 34.4 5.13 129.8 5.13 33.7 6.45 127.0 6.45 GPM HP LPM HP @550 RPM 41.9 1.68 158.1 1.68 40.9 2.50 154.2 2.50 38.9 4.13 146.8 4.13 37.6 5.73 141.9 5.73 36.8 7.26 138.9 7.26 Order Information Model Number 9910-D160 Max GPM Max LPM Max PSI Max BAR Max RPM Shaft Output 41.9 155.1 290 20 550 1-3⁄8"- 6 splined male shaft All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. Desmopan® is a registered trademark of Bayer Aktiengesellschaft, Farbenfabriken. Hypro® is a registered trademark of Pentair. 76 DIAPHRAGM PUMPS Low Pressure, 6 Diaphragm Model 9910-D250 • Max. fluid temperature: 140°F/60°C • Port sizes: 2" inlet, 1-1⁄2" outlet, hose barb • Diaphragms: 6, semi-hydraulic, Desmopan standard, Buna available ® • Housing components for liquid handling: epoxy-coated • Mounting base: included • Pump shaft rotation: CW and CCW • For hydraulic drive adaption, see page 87. • Recommended control unit: 3300-0082, see page 88. • Weight: 92 lbs./41.7 kg Pressure in PSI and BAR 0 PSI 0 BAR 72 PSI 5 BAR 145 PSI 10 BAR 217 PSI 15 BAR 290 PSI 20 BAR GPM HP LPM HP @350 RPM 42.7 0.71 161.2 0.71 41.4 2.33 156.1 2.33 40.1 4.09 151.4 4.09 39.3 5.70 148.5 5.70 38.8 7.52 146.4 7.52 GPM HP LPM HP @400 RPM 48.3 0.90 182.5 0.90 47.2 2.73 178.2 2.73 45.9 4.73 173.1 4.73 45.1 6.58 170.0 6.58 44.5 8.45 167.9 8.45 GPM HP LPM HP @450 RPM 54.3 1.22 204.8 1.22 52.7 3.10 198.9 3.10 52.1 5.27 196.4 5.27 50.7 7.45 191.5 7.45 50.1 9.66 189.0 9.66 GPM HP LPM HP @500 RPM 59.8 1.60 225.7 1.60 58.1 3.45 219.4 3.45 56.6 6.02 213.8 6.02 55.5 8.32 209.5 8.32 54.8 10.89 206.9 10.89 GPM HP LPM HP @550 RPM 65.7 2.01 248.1 2.01 63.3 3.88 239.0 3.88 61.3 6.45 231.2 6.45 60.2 9.22 227.1 9.22 59.2 11.54 223.4 11.54 Order Information Model Number Max GPM Max LPM Max PSI Max BAR Max RPM Shaft Output 9910-D250 65.7 248.7 290 20 550 1-3⁄8"- 6 splined male shaft All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. Medium Pressure, 2 Diaphragm Model 9910-D252, D252GRGI, D252GRGI58 and D252GRGIAP • Max. fluid temperature: 140°F/60°C • Diaphragms: 2, semi-hydraulic, Desmopan standard, Buna available ® • Housing: anodized aluminum • Mounting base: included • Recommended control unit: 9910-KIT1990, see page 88. • Weight: 14 lbs./6.4 kg (GRGI models); 12 lbs./5.4 kg (D252) Order Information Pressure GPM HP in PSI LPM HP and BAR @450 RPM 0 PSI 4.8 0.15 0 BAR 18.0 0.15 72 PSI 4.1 0.33 5 BAR 15.3 0.33 145 PSI 4.0 0.49 10 BAR 14.9 0.49 217 PSI 3.9 0.66 15 BAR 14.7 0.66 290 PSI 3.8 0.84 20 BAR 14.5 0.84 GPM HP LPM HP @500 RPM 5.4 0.19 20.5 0.19 4.6 0.37 17.3 0.37 4.4 0.57 16.6 0.57 4.3 0.76 16.4 0.76 4.2 0.94 16.0 0.94 GPM HP LPM HP @550 RPM 5.9 0.23 22.4 0.23 5.0 0.42 18.7 0.42 4.8 0.64 18.1 0.64 4.7 0.82 17.9 0.82 4.6 1.02 17.4 1.02 GPM HP GPM HP LPM HP LPM HP @600 RPM @650 RPM 6.1 0.25 6.5 0.27 23.1 0.25 24.6 0.27 5.5 0.45 5.9 0.46 20.8 0.45 22.2 0.46 5.3 0.65 5.6 0.72 19.8 0.65 21.3 0.72 5.2 0.89 5.5 0.97 19.6 0.89 20.9 0.97 5.1 1.12 5.4 1.21 19.4 1.12 20.5 1.21 Model Number Max Max Max Max Max GPM LPM PSI BAR RPM 9910-D252 6.5 24.6 290 20 650 9910-D252GRGI 6.5 24.6 290 20 3600 9910-D252GRGI58 5.5 20.8 290 20 3600 9910-D252GRGIAP All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. Desmopan® is a registered trademark of Bayer Aktiengesellschaft, Farbenfabriken. Hypro® is a registered trademark of Pentair. 77 6.5 24.6 290 20 3600 Port Size Shaft Output 3⁄4" HB inlet, 1⁄2" HB outlet 3⁄4" HB inlet, 3⁄8" HB outlet 3⁄4" HB inlet, 3⁄8" HB outlet 3⁄4" solid keyed shaft 3⁄4" HB inlet, 3⁄8" HB outlet 3⁄4" hollow shaft 5⁄8" hollow shaft 3⁄4" hollow input shaft with 5⁄8" output solid shaft Medium Pressure, 2 Diaphragm Model 9910-D30, D30AP-A, D30GRGI and D30-B-GRGI • Max. fluid temperature: 140°F/60°C • Shaft: flanged for shaft kit (D30); flanged w/ 3⁄4" shaft ext. (D30AP-A); 3⁄4" hollow shaft for gas engine mount (D30GRGI) • Diaphragms: 2, semi-hydraulic, Desmopan standard, Buna available ® • Housing components for liquid handling: epoxy-coated • Pump shaft rotation: CW and CCW • For shaft kits and other drive options, see pages 86-87. • Recommended control unit: 9910-GS40GI, see page 87. • Weight: 23 lbs./10.4 kg (D30); 33 lbs./15.0 kg (D30GRGI and D30-B-GRGI); 24 lbs./10.9 kg (D30AP-A) Order Information Pressure in PSI and BAR 0 PSI 0 BAR 145 PSI 10 BAR 290 PSI 20 BAR 465 PSI 30 BAR 580 PSI 40 BAR GPM HP LPM HP @350 RPM 6.1 0.13 23.0 0.13 5.7 0.55 21.4 0.55 5.6 1.00 21.0 1.00 5.5 1.46 20.6 1.46 5.2 1.90 19.5 1.90 GPM HP LPM HP @400 RPM 6.9 0.16 26.1 0.16 6.6 0.66 24.9 0.66 6.3 1.14 23.7 1.14 5.9 1.67 22.4 1.67 5.8 2.11 22.1 2.11 GPM HP LPM HP @450 RPM 7.8 0.19 29.5 0.19 7.2 0.76 27.3 0.76 7.1 1.29 26.7 1.29 6.9 1.89 26.0 1.89 6.8 2.41 25.8 2.41 GPM HP GPM LPM HP @500 RPM 8.7 0.24 32.8 0.24 8.1 0.85 30.6 0.85 7.8 1.47 29.5 1.47 7.7 2.06 29.0 2.06 7.5 2.71 28.2 2.71 HP LPM HP @550 RPM 9.6 0.28 36.2 0.28 9.3 0.90 34.9 0.90 8.8 1.64 33.4 1.64 8.6 2.27 32.5 2.27 8.3 2.94 31.4 2.94 Model Number 9910-D30 9910-D30AP-A 9910-D30GRGI 9910-D30-B-GRGI D30HRGI Max GPM 9.6 Max Max Max Max Port Size LPM PSI BAR RPM 36.3 580 40 550 1" HB inlet, 1⁄2" HB outlet Same pump as 9910-D30 with 3⁄4" solid thru shaft Assembled with gearbox 9910-KIT1640 and control 9.6 36.3 580 40 3600 9910-GS40GI for mounting on 5 hp gas engine Same pump as 9910-D30GRGI with Buna-N diaphragms Assembled with gearbox 8000-0056 and control 9.6 36.3 580 40 3600 9910-GS40GI for mounting on 5 hp gas engine All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. Medium Pressure, 3 Diaphragm Model 9910-D403, and D403GRGI • Max. fluid temperature: 140°F/60°C • Shaft: flanged for kit attachment (D403); 3⁄4" hollow shaft for gas engine mount (D403GRGI) • Diaphragms: 3, semi-hydraulic, Desmopan standard, Buna available ® • Housing: anodized aluminum • Mounting base: included • For shaft kits and other drive options, see pages 86-87. • Recommended control unit: 9910-GR40, see page 88. • Weight: 23 lbs./10.4 kg (D403); 32 lbs./14.5 kg (D403GRGI) Pressure in PSI and BAR 0 PSI 0 BAR 145 PSI 10 BAR 290 PSI 20 BAR 465 PSI 30 BAR 580 PSI 40 BAR GPM HP LPM HP @350 RPM 6.3 0.22 23.9 0.22 6.2 0.73 23.2 0.73 6.1 1.21 23.0 1.21 6.0 1.80 22.7 1.80 5.9 2.36 22.3 2.36 GPM HP LPM HP @400 RPM 7.3 0.33 27.6 0.33 7.1 0.91 26.7 0.91 7.0 1.41 26.4 1.41 6.8 2.02 25.8 2.02 6.7 2.65 25.5 2.65 GPM HP LPM HP @450 RPM 8.0 0.41 30.3 0.41 7.9 1.07 29.9 1.07 7.8 1.63 29.5 1.63 7.7 2.34 29.2 2.34 7.6 2.91 28.9 2.91 GPM HP LPM HP @500 RPM 8.9 0.54 33.6 0.54 8.8 1.12 33.4 1.12 8.7 1.82 32.8 1.82 8.6 2.61 32.3 2.61 8.4 3.30 31.7 3.30 GPM HP LPM HP @550 RPM 9.9 0.61 37.5 0.61 9.8 1.21 37.1 1.21 9.7 2.03 36.7 2.03 9.6 2.84 36.4 2.84 9.5 3.62 35.9 3.62 Order Information Model Number Max GPM Max LPM Max PSI Max BAR Max RPM Drive and Control Unit 9910-D403 9.9 37.5 580 40 550 1" HB inlet, 1⁄2" HB outlet 9910-D403GRGI 9.9 37.5 580 40 3600 Assembled with gearbox 9910-KIT1640 and control 9910-GR40 for mounting on 5-6 hp gas engines All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. Desmopan® is a registered trademark of Bayer Aktiengesellschaft, Farbenfabriken. Hypro® is a registered trademark of Pentair. 78 TRANSFER PUMPS DIAPHRAGM PUMPS Medium Pressure, 2 Diaphragm Model 9910-D50, D50AP-A and D50-B • Max. fluid temperature: 140°F/60°C • Shaft: flanged for shaft kit (D50); flange w/1" shaft ext. (D50AP-A) • Diaphragms: 2, full-hydraulic, Desmopan standard, Buna available (D50-B has Buna diaphragms) ® • Housing components for liquid handling: epoxy coated • Pump shaft rotation: CW and CCW • For shaft kits and other drive options, see pages 86-87. • Recommended control unit: 9910-GS40GI, see page 87. • Weight: 35 lbs./15.9 kg Pressure GPM HP in PSI LPM HP and BAR @350 RPM 0 PSI 9.7 0.36 0 BAR 36.8 0.36 145 PSI 9.3 1.08 10 BAR 35.1 1.08 290 PSI 9.1 1.85 20 BAR 34.4 1.85 465 PSI 8.8 2.61 30 BAR 33.2 2.61 580 PSI 8.6 3.44 40 BAR 32.5 3.44 GPM HP LPM HP @400 RPM 11.9 0.49 45.0 0.49 11.5 1.25 43.3 1.25 11.0 2.09 41.5 2.09 10.8 3.00 40.6 3.00 10.3 3.77 38.9 3.77 GPM HP LPM HP @450 RPM 12.3 0.64 46.6 0.64 11.9 1.49 44.9 1.49 11.7 2.40 44.1 2.40 11.6 3.41 43.6 3.41 11.4 4.38 42.9 4.38 GPM HP GPM HP LPM HP LPM HP @500 RPM @550 RPM 13.2 0.77 14.8 0.94 49.9 0.77 55.8 0.94 12.9 1.59 14.6 1.76 48.6 1.59 55.1 1.76 12.6 2.72 14.5 2.97 47.4 2.72 54.9 2.97 12.0 3.80 14.4 4.03 45.3 3.80 54.4 4.03 11.9 4.92 14.1 5.17 44.7 4.92 53.3 5.17 Order Information Model Number 9910-D50 9910-D50-B 9910-D50AP-A Max GPM 14.8 Max Max Max Max Port Size LPM PSI BARI RPM 56.0 580 40 550 1-1⁄4" HB inlet, 1⁄2" HB outlet Same pump as 9910-D50 w/Buna-N diaphragms Same pump as 9910-D50 w/solid 1" thru shaft All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. Medium Pressure, 3 Diaphragm Model 9910-D503, D503GRGI and D503GRGI34 • Max. fluid temperature: 140°F/60°C • Shaft: flanged adapter (D503); 1" hollow shaft for gas engine mount (D503GRGI) • Diaphragms: 3, semi-hydraulic, Desmopan standard, Buna available • Housing: anodized aluminum • Mounting base: included • Pump shaft rotation: CW and CCW • For shaft kits and other drive options, see pages 86-87. • Recommended control unit: 9910-RM40, see page 88. ® • Weight: 28 lbs./12.7 kg Pressure GPM HP in PSI LPM HP and BAR @350 RPM 0 PSI 9.4 0.52 0 BAR 35.4 0.52 145 PSI 9.0 1.24 10 BAR 34.1 1.24 290 PSI 8.9 2.05 20 BAR 33.6 2.05 465 PSI 8.7 2.78 30 BAR 33.0 2.78 580 PSI 8.5 3.56 40 BAR 32.2 3.56 GPM HP LPM HP @400 RPM 12.1 0.86 45.5 0.86 11.6 1.68 44.0 1.68 11.4 2.67 43.2 2.67 11.3 3.72 42.5 3.72 11.0 4.67 41.7 4.67 GPM HP LPM HP @450 RPM 12.6 0.91 47.6 0.91 11.9 1.72 44.9 1.72 11.7 2.74 44.1 2.74 11.6 3.90 43.6 3.90 11.4 4.83 42.9 4.83 GPM HP LPM HP @500 RPM 13.4 1.09 50.5 1.09 13.2 1.85 49.7 1.85 12.8 3.01 48.4 3.01 12.6 4.14 47.4 4.14 12.2 5.37 46.0 5.37 GPM HP LPM HP @550 RPM 14.3 1.32 54.1 1.32 14.1 2.09 53.3 2.09 13.8 3.30 51.9 3.30 13.6 4.41 51.4 4.41 13.4 5.49 50.5 5.49 Order Information Model Number Max GPM Max LPM Max PSI Max BAR Max RPM Drive and Control Unit 9910-D503 14.3 54.1 580 40 550 – 9910-D503GRGI 14.3 54.1 580 40 9910-D503GRGI34 14.3 54.1 290 20 All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. Desmopan® is a registered trademark of Bayer Aktiengesellschaft, Farbenfabriken. Hypro® is a registered trademark of Pentair. 79 Assembled with gearbox 9910-KIT1642 and control 3600 9910-RM40 for mounting on 8 hp gas engine Assembled with gearbox 9910-KIT1640 and control 3600 9910-RM40 for mounting on 5-6.5 hp gas engines High Pressure, 3 Diaphragm Model 9910-D813 and D813GRGI • Max. fluid temperature: 140°F/60°C • Shaft: Flanged adapter and 1-3⁄8"- 6 splined male shaft ext. (D813); 1" hollow shaft for gas engine mount (D813GRGI) • Diaphragms: 3, semi-hydraulic, Desmopan standard Buna available ® • Housing: anodized aluminum • Mounting base: included • Pump shaft rotation: CW and CCW • For shaft kits and other drive options, see pages 86-87. • Recommended control unit: 9910-VDR50 or 9910-GS50GI, see page 88. • Weight: 50 lbs./22.7 kg (D813); 66 lbs./30 kg (D813GRGI) Order Information Pressure GPM HP in PSI LPM HP and BAR @350 RPM 0 PSI 14.7 0.41 0 BAR 55.6 0.41 217 PSI 13.9 2.23 15 BAR 52.3 2.23 435 PSI 13.6 4.06 30 BAR 51.2 4.06 580 PSI 13.5 5.22 40 BAR 50.8 5.22 725 PSI 13.4 6.30 50 BAR 50.4 6.30 GPM HP LPM HP @400 RPM 17.0 0.64 64.3 0.64 16.1 2.51 60.8 2.51 15.6 4.65 58.7 4.65 15.3 6.03 57.7 6.03 15.0 7.31 56.5 7.31 GPM HP LPM HP @450 RPM 18.2 0.74 68.7 0.74 17.8 2.93 67.1 2.93 17.4 5.26 65.5 5.26 17.2 6.81 64.8 6.81 16.9 8.33 63.9 8.33 GPM HP GPM HP LPM HP LPM HP @500 RPM @550 RPM 19.8 0.93 20.8 1.12 74.7 0.93 78.6 1.12 19.5 3.40 19.9 3.61 73.7 3.40 75.0 3.61 19.1 5.80 19.7 6.23 71.9 5.80 74.3 6.23 18.4 7.51 19.2 8.01 69.4 7.51 72.6 8.01 17.9 9.23 19.0 9.82 67.5 9.23 71.8 9.82 Model Number Max GPM Max LPM Max PSI Max BAR Max RPM 9910-D813 20.8 78.7 725 50 550 9910-D813GRGI 20.8 78.7 725 50 3600 Port Size Shaft Output 1-1⁄4" 6 splined HB inlet, 1-3⁄8"male shaft 3⁄4" NPT extension outlet Assembled with gearbox 9910-KIT1642 and control 9910-VDR50 for mounting on 13 hp gas engine All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. High Pressure, 4 Diaphragm Model 9910-D1064 and D1064GRGI • Max. fluid temperature: 140°F/60°C • Shaft: Flanged adapter and 1-3⁄8"- 6 splined male shaft ext. (D1064); 1" hollow shaft for gas engine mount (D1064GRGI) • Diaphragms: 4, semi-hydraulic, Desmopan standard, Buna available • Housing: anodized aluminum • Mounting base: included • Pump shaft rotation: CW and CCW ® • For shaft kits and other drive options, see pages 86-87. • Recommended control unit: 9910-VDR50 or 9910-GS50GI, see page 88. • Weight: 54 lbs./24.5 kg (D1064); 76 lbs./34.5 kg (D1064GRGI) Pressure GPM HP in PSI LPM HP and BAR @350 RPM 0 PSI 19.6 0.75 0 BAR 74.0 0.75 217 PSI 18.8 2.95 15 BAR 70.8 2.95 435 PSI 18.4 5.40 30 BAR 69.4 5.40 580 PSI 18.2 7.01 40 BAR 68.8 7.01 725 PSI 18.0 8.65 50 BAR 67.9 8.65 GPM HP LPM HP @400 RPM 22.4 1.04 84.6 1.04 21.6 3.41 81.6 3.41 21.1 6.20 79.5 6.20 21.0 8.05 79.2 8.05 20.8 9.88 78.4 9.88 GPM HP LPM HP @450 RPM 25.2 1.33 95.1 1.33 24.5 3.92 92.3 3.92 23.9 7.01 90.3 7.01 23.7 9.12 89.3 9.12 23.3 11.18 87.9 11.18 GPM HP LPM HP @500 RPM 27.1 1.59 102.4 1.59 26.8 4.33 101.1 4.33 26.2 7.77 98.8 7.77 26.0 10.06 98.1 10.06 25.9 12.38 97.6 12.38 GPM HP LPM HP @550 RPM 28.7 1.90 108.5 1.90 28.5 4.71 107.6 4.71 28.3 8.28 106.7 8.28 28.0 10.79 105.8 10.79 27.8 13.13 104.7 13.13 Order Information Max LPM Max PSI Max BAR 9910-D1064 28.7 108.6 725 50 9910-D1064GRGI 28.7 108.6 725 50 Model Number All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. Desmopan® is a registered trademark of Bayer Aktiengesellschaft, Farbenfabriken. Hypro® is a registered trademark of Pentair. 80 Max GPM Max RPM Port Size Shaft Output 1-3⁄8"- 6 splined 550 1-1⁄4" HB inlet, male shaft 3⁄4" NPT outlet extension Assembled with 3600 gearbox 9910-KIT1642 and control 9910-VDR50 for mounting on 18 hp gas engine TRANSFER PUMPS DIAPHRAGM PUMPS High Pressure, 5 Diaphragm Model 9910-D1265 • Max. fluid temperature: 140°F/60°C • Shaft: flanged adapter and 1-3⁄8"- 6 splined male shaft ext. • Diaphragms: 5, semi-hydraulic, Desmopan standard, Buna available ® • Housing: anodized aluminum • Mounting base: included • Pump shaft rotation: CW and CCW • For shaft kits and other drive options, see pages 86-87. • Recommended control unit: 9910-VDR50 or 9910-GS50GI, see page 88. • Weight: 67 lbs./30.4 kg Order Information Pressure GPM HP in PSI LPM HP and BAR @350 RPM 0 PSI 23.9 1.23 0 BAR 90.0 1.23 217 PSI 22.8 3.80 15 BAR 86.0 3.80 435 PSI 22.5 6.91 30 BAR 84.8 6.91 580 PSI 22.3 9.03 40 BAR 84.3 9.03 725 PSI 22.2 11.12 50 BAR 83.7 11.12 GPM HP LPM HP @400 RPM 26.9 1.62 101.6 1.62 26.1 4.44 98.3 4.44 25.6 7.93 96.7 7.93 25.4 10.30 95.7 10.30 25.1 12.61 94.8 12.61 GPM HP LPM HP @450 RPM 29.8 2.10 112.6 2.10 29.2 5.14 110.3 5.14 28.8 9.06 108.5 9.06 28.5 11.61 107.5 11.61 28.3 14.44 106.8 14.44 GPM HP LPM HP @500 RPM 32.0 2.62 120.8 2.62 31.7 5.50 119.6 5.50 31.5 9.64 118.9 9.64 31.2 12.33 117.7 12.33 30.9 15.31 116.4 15.31 GPM HP LPM HP @550 RPM 33.4 2.95 126.1 2.95 33.1 5.81 124.9 5.81 32.8 10.03 123.9 10.03 32.7 12.60 123.4 12.60 31.5 15.41 118.7 15.41 Model Number Max GPM Max LPM Max PSI Max BAR Max RPM 9910-D1265 33.4 126.4 725 50 550 Port Size Shaft Output 6 splined 1-1⁄2" HB inlet, 1-3⁄8"male shaft 3⁄4" NPT outlet extension All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. High Pressure, 3 Diaphragm Model 9910-DBS110 and DBA110 • Max fluid temp: 140°F/60°C • Diaphragms: 3, semi-hydraulic, Buna standard • Housing components for liquid handling: - DBS – external bronze manifolds and brass heads - DBA – external manifolds and heads in anodized aluminum • Pump shaft rotation: CW and CCW • Recommended control unit: 9910-BMH50 or 9910-GH50, see page 88. • Weight: 114 lbs./51.7 kg (DBS110); 88 lbs./40 kg (DBA110) Pressure in PSI and BAR 0 PSI 0 BAR 217 PSI 15 BAR 435 PSI 30 BAR 580 PSI 40 BAR 725 PSI 50 BAR GPM HP LPM HP @350 RPM 19.2 0.53 72.6 0.53 18.7 2.91 70.7 2.91 18.5 5.19 69.9 5.19 18.4 6.87 69.5 6.87 18.2 8.43 68.7 8.43 GPM HP LPM HP @400 RPM 21.9 0.60 82.8 0.60 21.5 3.18 81.2 3.18 21.2 5.91 79.9 5.91 20.9 7.66 78.9 7.66 20.8 9.60 78.5 9.60 GPM HP LPM HP @450 RPM 24.6 0.78 93.0 0.78 24.2 3.74 91.4 3.74 24.0 6.51 90.7 6.51 23.7 8.69 89.3 8.69 23.5 10.73 88.5 10.73 GPM HP LPM HP @500 RPM 27.3 0.89 103.2 0.89 27.1 4.02 102.1 4.02 26.9 7.51 101.4 7.51 26.4 9.67 99.8 9.67 25.9 11.90 97.7 11.90 GPM HP LPM HP @550 RPM 30.0 1.12 113.1 1.12 29.3 4.50 110.6 4.50 29.0 8.29 109.4 8.29 28.7 10.71 108.2 10.71 28.6 13.11 108.0 13.11 Order Information Max GPM Max LPM Max PSI Max BAR Max RPM 9910-DBS110 30.0 113.6 725 50 550 9910-DBA110 30.0 113.6 725 50 550 Model Number All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. Desmopan® is a registered trademark of Bayer Aktiengesellschaft, Farbenfabriken. Hypro® is a registered trademark of Pentair. 81 Port Size Shaft Output 1-1⁄2" HB inlet, 3⁄4" NPT outlet 1-1⁄2" HB inlet, 3⁄4" NPT outlet 1-3⁄8"- 6 splined male doubleended shaft 1-3⁄8"- 6 splined male doubleended shaft High Pressure, 3 Diaphragm Model 9910-DBS140 and DBA140 • Max fluid temp: 140°F/60°C • Diaphragms: 3, semi-hydraulic, Buna standard • Housing components for liquid handling: - DBS – external bronze manifolds and brass heads - DBA – external manifolds and heads in anodized aluminum • Weight: 114 lbs./51.7 kg (DBS140); 88 lbs./40 kg (DBA140) • Pump shaft rotation: CW and CCW • Recommended control unit: 9910-BMH50 or 9910-GH50, see page 88. • Weight: 114 lbs./51.7 kg (DBS140); 88 lbs./40 kg (DBA140) Order Information Pressure GPM HP in PSI LPM HP and BAR @350 RPM 0 PSI 25.1 0.82 0 BAR 94.6 0.82 217 PSI 24.1 3.47 15 BAR 91.1 3.47 435 PSI 23.8 6.53 30 BAR 89.9 6.53 580 PSI 23.6 8.53 40 BAR 89.1 8.53 725 PSI 23.3 10.47 50 BAR 88.1 10.47 GPM HP LPM HP @400 RPM 28.5 1.11 107.5 1.11 27.5 4.01 103.8 4.01 27.2 7.69 102.8 7.69 26.8 9.73 101.0 9.73 26.5 11.88 100.0 11.88 GPM HP LPM HP @450 RPM 31.5 1.50 119.0 1.50 30.7 4.51 115.9 4.51 30.2 8.39 114.1 8.39 29.8 10.82 112.6 10.82 29.7 13.28 112.2 13.28 GPM HP LPM HP @500 RPM 34.8 2.02 131.5 2.02 33.2 5.01 125.3 5.01 32.6 9.28 123.1 9.28 32.2 12.02 121.5 12.02 31.9 14.67 120.4 14.67 GPM HP LPM HP @550 RPM 37.8 2.58 142.6 2.58 37.3 5.61 140.9 5.61 36.7 10.34 138.7 10.34 36.5 13.33 137.6 13.33 36.3 16.28 137.0 16.28 Model Number Max GPM Max LPM Max PSI Max BAR Max RPM 9910-DBS140 37.8 143.1 725 50 550 9910-DBA140 37.8 143.1 725 50 550 Port Size Shaft Output 6 splined 1-1⁄2" HB inlet, 1-3⁄8"double3⁄4" NPT outlet male ended shaft 6 splined 1-1⁄2" HB inlet, 1-3⁄8"double3⁄4" NPT outlet male ended shaft All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. High Pressure, 4 Diaphragm Model 9910-DBS160 and DBA160 • Max fluid temp: 140°F/60°C • Diaphragms: 4, semi-hydraulic, Buna standard • Housing components for liquid handling: - DBS – external bronze manifolds and brass heads - DBA – external manifolds and heads in anodized aluminum • Pump shaft rotation: CW and CCW • Recommended control unit: 9910-BMH50 or 9910-GH50, see page 88. • Weight: 143 lbs./64.9 kg (DBS160); 112 lbs./50.9 kg (DBA160) Pressure in PSI and BAR 0 PSI 0 BAR 217 PSI 15 BAR 435 PSI 30 BAR 580 PSI 40 BAR 725 PSI 50 BAR GPM HP LPM HP @350 RPM 25.5 1.12 96.3 1.12 24.9 3.72 94.1 3.72 24.6 6.90 93.0 6.90 24.5 8.88 92.4 8.88 24.2 10.91 91.4 10.91 GPM HP LPM HP @400 RPM 29.3 1.52 110.4 1.52 28.7 4.39 108.4 4.39 28.3 8.01 106.6 8.01 28.1 10.22 106.1 10.22 27.9 12.46 105.3 12.46 GPM HP LPM HP @450 RPM 32.6 1.83 122.9 1.83 32.1 4.83 121.3 4.83 31.9 8.89 120.5 8.89 31.5 11.49 118.9 11.49 31.3 14.01 118.2 14.01 GPM HP LPM HP @500 RPM 36.1 2.23 136.3 2.23 35.7 5.27 134.8 5.27 35.3 9.80 133.4 9.80 35.0 12.77 132.2 12.77 34.8 15.64 131.5 15.64 GPM HP LPM HP @550 RPM 39.6 2.62 149.4 2.62 39.1 5.91 147.5 5.91 38.5 10.75 145.3 10.75 38.4 14.12 144.9 14.12 38.2 17.28 144.2 17.28 Order Information Max LPM Max PSI Max BAR Max RPM 9910-DBS160 39.6 149.9 725 50 550 9910-DBA160 39.6 149.9 725 50 550 Model Number All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. 82 Max GPM Port Size Shaft Output 6 splined 1-1⁄2" HB inlet, 1-3⁄8"male double3⁄4" NPT outlet ended shaft 6 splined 1-1⁄2" HB inlet, 1-3⁄8"male double3⁄4" NPT outlet ended shaft TRANSFER PUMPS DIAPHRAGM PUMPS High Pressure, 4 Diaphragm Model 9910-DBS200 and DBA200 • Max fluid temp: 140°F/60°C • Diaphragms: 4, semi-hydraulic, Buna standard • Housing components for liquid handling: - DBS – external bronze manifolds and brass heads - DBA – external manifolds and heads in anodized aluminum • Pump shaft rotation: CW and CCW • Recommended control unit: 9910-GH50, see page 88. • Weight: 143 lbs./64.9 kg (DBS200); 112 lbs./50.9 kg (DBA200) Order Information Pressure GPM HP in PSI LPM HP and BAR @350 RPM 0 PSI 33.0 1.44 0 BAR 124.5 1.44 217 PSI 32.0 4.68 15 BAR 120.8 4.68 435 PSI 31.4 8.79 30 BAR 118.4 8.79 580 PSI 31.3 11.35 40 BAR 118.2 11.35 725 PSI 31.1 14.01 50 BAR 117.2 14.01 GPM HP LPM HP @400 RPM 37.3 1.92 140.7 1.92 36.7 5.38 138.5 5.38 36.1 10.24 136.2 10.24 35.8 13.01 135.0 13.01 35.3 15.96 133.1 15.96 GPM HP LPM HP @450 RPM 41.6 2.74 156.9 2.74 41.0 6.13 154.8 6.13 40.4 11.44 152.6 11.44 40.0 14.69 151.1 14.69 39.9 18.12 150.5 18.12 GPM HP LPM HP @500 RPM 45.9 3.03 173.1 3.03 45.3 6.91 170.8 6.91 44.8 12.71 169.0 12.71 44.6 16.45 168.3 16.45 44.4 20.21 167.5 20.21 GPM HP LPM HP @550 RPM 49.7 3.67 187.6 3.67 49.1 7.64 185.4 7.64 48.7 13.92 183.9 13.92 48.3 17.98 182.5 17.98 48.2 22.21 182.1 22.21 Model Number Max Max Max Max Max GPM LPM PSI BAR RPM 9910-DBS200 49.7 188.1 725 50 550 9910-DBA200 49.7 188.1 725 50 550 Port Size Shaft Output 1-1⁄2" HB inlet, 1-3⁄8"- 6 splined male 3⁄4" NPT outlet double-ended shaft 1-1⁄2" HB inlet, 1-3⁄8"- 6 splined male 3⁄4" NPT outlet double-ended shaft All HP requirements listed in the table are electrical. For approximate gasoline equivalent, multiply by 1.3. Gas Engine-Driven, Medium Pressure, 2 Diaphragm Models: D252GRGI-25, D252GRGI-55, 1534 • Closed-coupled, gas engine driven (EPA & CARB certified) • Max. fluid temperature: 140°F/60°C • Diaphragms: 2, semi-hydraulic, Desmopan standard, Buna available ® • Housing: anodized aluminum • Mounting base: included Pressure in PSI and BAR BAR 0 PSI 0 BAR 50 PSI 3.4 BAR 100 PSI 6.9 BAR 150 PSI 10.3 BAR 200 PSI 13.6 BAR 250 PSI 17.0 BAR 290 PSI 20 BAR GPM LPM 5.9 22.3 5.3 20.0 5.2 19.5 5.1 19.3 5.0 18.9 4.9 18.5 4.9 18.5 Order Information Model Number D252GRGI-25 D252GRGI-55 1534 Max GPM 5.9 5.9 5.9 Max LPM 22.3 22.3 22.3 Max PSI 290 290 290 Max BAR 20 20 20 Desmopan® is a registered trademark of Bayer Aktiengesellschaft, Farbenfabriken. Hypro® is a registered trademark of Pentair. 83 Max RPM 3600 2800 2800 Control Unit and Gearbox 9910-KIT1990 9910-KIT1990 9910-KIT1990 Engine Mfgr. and hp PowerPro 2.5 hp PowerPro 6.5 hp Briggs and Stratton® 3.5 hp Gas Engine-Driven, Medium Pressure, 2 Diaphragm Model: D30HRGI-65, D30HRGI-65E, D30GRGI-65, 1535, D30HRGI • Closed-coupled, gas engine driven (EPA & CARB certified) • Max. fluid temperature: 140°F/60°C • Diaphragms: 2, semi-hydraulic, Desmopan® standard, Buna available • Housing components for liquid handling: epoxy-coated Order Information Pressure in PSI and BAR 0 PSI 0 BAR 290 PSI 20 BAR 435 PSI 30 BAR 580 PSI 40 BAR D30HRGI-65,65E GPM LPM @550 RPM 9.6 36 8.8 33 8.6 33 8.3 31 D30GRGI-65,1535 GPM LPM @550 RPM 9.3 35 9.3 34 8.7 33 8.2 31 Model Number D30HRGI-65 Max Max Max Max Max Control Unit and Gearbox GPM LPM PSI BAR RPM 9.6 36.3 580 40 3600 GS40GI and 8000-0056 D30HRGI-65E 9.6 36.3 580 40 3600 GS40GI and 8000-0056 D30GRGI-65 9.6 36.3 580 40 3600 1535 9.3 35.2 580 40 3600 D30HRGI 9.3 35.2 580 40 3600 GS40GI and KIT1640 (gearbox) GS40GI and KIT1640 (gearbox) GS40GI and KIT1640 (gearbox) Engine Mfgr. and hp PowerPro 6.5 HP PowerPro 6.5 HP w/ electric start PowerPro 6.5 hp Industrial Plus Briggs & Stratton® 6.5 hp Less engine Gas Engine-Driven, Medium Pressure, 3 Diaphragm Model: D403HRGI-65, D403HRGI-65E, D403GRGI-65, D403HRGI • Closed-coupled, gas engine driven (EPA & CARB certified) • Max. fluid temperature: 140°F/60°C • Diaphragms: 3, semi-hydraulic, Desmopan® standard, Buna available • Housing: anodized aluminum • Mounting base: included Order Information Pressure in PSI and BAR 0 PSI 0 BAR 290 PSI 20 BAR 435 PSI 30 BAR 580 PSI 40 BAR D403HRGI-65,65E GPM LPM @550 RPM 9.9 38 9.7 37 9.6 36 9.5 36 D403GRGI-65 GPM LPM @550 RPM 10.6 40 9.8 37 9.7 37 9.5 36 D403HRGI-65 Max GPM 9.9 Max lPM 37.5 Max PSI 580 Max BAR 40 Max RPM 3600 D403HRGI-65E 9.9 37.5 580 40 3600 GR40 and 8000-0056 D403HRGI 9.9 37.5 580 40 3600 GR40 and 8000-0056 D403GRGI-65 10.6 40.1 580 40 3600 GR40 and KIT1640 (gearbox) Model Number Desmopan® is a registered trademark of Bayer Aktiengesellschaft, Farbenfabriken. Hypro® is a registered trademark of Pentair. 84 Control Unit and Gearbox Engine Mfgr. and hp GR40 and 8000-0056 PowerPro 6.5 HP PowerPro 6.5 HP w/ electric start Less engine PowerPro 6.5 hp Model: D503HRGI-65, D503HRGI • Hypro quality diaphragm pumps powered by field-proven PowerPro certified engines (EPA & CARB certified) • Oil-bath design and premium quality synthetic diaphragms provides longer life and greater reliability • Oil-bath design also allows pump to be run dry • Self-priming operation • Corrosive, abrasive and general use chemical compatibility • Visual oil-level sight glass • Supported with a one-year Hypro warranty on both pump and PowerPro engine • Diaphragms: 3, semi-hydraulic, Desmopan® standard, Buna available Order Information Pressure in PSI and BAR 0 PSI 0 BAR 145 PSI 10 BAR 290 PSI 20 BAR D503HRGI-65,65E GPM LPM @550 RPM 14.3 54 14.1 53 13.8 52 D503HRGI-65 Max GPM 14.3 Max Max Max Max Control Unit & GPM PSI BAR RPM Gearbox 54.1 290 20 3600 RM40 and 8000-0056 D503HRGI-65E 14.3 54.1 290 20 3600 RM40 and 8000-0056 D503HRGI 14.3 54.1 290 20 3600 RM40 and 8000-0056 Model Number Desmopan® is a registered trademark of Bayer Aktiengesellschaft, Farbenfabriken. Hypro® is a registered trademark of Pentair. 85 Engine Mfgr. & HP PowerPro 6.5 HP PowerPro 6.5 HP w/ electric start Less engine DIAPHRAGM PUMPS Gas Engine-Driven, Heavy-Duty Medium Pressure, 3 Diaphragm Diaphragm Kits and Applications Hypro Pump Oil Part Number Description 2160-0038 2160-0047 2160-0048 1 quart of specially-formulated pump oil 1 gallon of specially-formulated pump oil 2 ½ gallons of specially-formulated pump oil Weight US Units Metric 2 lbs. 907 g 9 lbs. 4.1 kg 22 lbs. 9.98 kg All Hypro Plunger Pumps are shipped with oil. To optimize pump life, Hypro recommends an oil change after 40 hours of break-in operation and every three months or 500 hour intervals thereafter. Use only Hypro oil. 1-3⁄8"-6 Spline Female PTO Shaft Kits Kit Number Description 9910-KIT1704 9910-KIT1708 9910-KIT2204 For Model 9910-D50, D30, D303 and D403 pumps For Model 9910-D70 and D115 pumps For Model 9910-D503, D813, D1064 and D1265 pumps Weight US Units Metric 7 lbs. 3.2 kg 5.25 lbs. 2.4 kg 7 lbs. 3.2 kg Kit includes a female PTO coupler and retaining clamp, torque arm and mounting bracket, chains and necessary hardware. 1-3⁄8"-6 Spline Male PTO Shaft Kits Kit Number Description 9910-KIT1702 9910-KIT1706 *9910-KIT1710 9910-KIT2200 9910-KIT2201 For Model 9910-D30 pump For Model 9910-D50 pump For Model 9910-D70 and D115 pumps For Model 9910-D503, D303 and D403 pumps For Model 9910-D813, D1064 and D1265 pumps Weight US Units Metric 3 lbs. 1.4 kg 4.25 lbs. 1.9 kg 5.5 lbs. 2.5 kg 4.25 lbs. 1.9 kg 4.25 lbs. 1.9 kg *Kit includes a male PTO shaft adapter, mounting bracket and necessary hardware. 1" Solid Shaft Kits Kit Number Description 9910-KIT1703 9910-KIT1707 *9910-KIT1711 9910-KIT2202 9910-KIT2203 For Model 9910-D30 pump For Model 9910-D50 pump For Model 9910-D70 and D115 pumps For Model 9910-D503, D303 and D403 pumps For Model 9910-D813, D1064 and D1265 pumps Weight US Units Metric 2.5 lbs. 1.7 kg 3.75 lbs. 1.7 kg 5 lbs. 2.3 kg 3.75 lbs. 1.7 kg 3.75 lbs. 1.7 kg *Kit includes a male PTO shaft adapter, mounting bracket and necessary hardware. Base Plates and Carrying Handles A C B Part Number Description 1510-0005 1510-0002 1510-0001 1510-0016 1510-0075 2801-0001 2801-0002 8" x 15" with 12 gauge 9 1⁄2" x 18" with 10 gauge 12" x 21" with 7 gauge 14" x 26" with 7 gauge 9-1⁄2" x 4-1⁄2" with 14 gauge (for 3 and 5 hp Briggs® or Honda® and 56 frame electric) Two handles, mounting bolts and nuts for #1510-0016 base Two handles, mounting bolts and nuts for #1510-0001 base Diaphragm Pump Repair Kits For Pump Model 9910-D70 9910-D115 and D135 9910-D160 9910-D250 9910-D12GRGI 9910-D503 9910-D252 (all versions) 9910-D30 (all versions) 9910-D50 9910-DBS110, DBS140, DBA110 and DBA140 9910-DBS160, DBS200, DBA160 and DBA200 9910-D303 9910-D403 9910-D813 9910-D1064 9910-D1265 9910-D1554 9910-D1516 Honda® is a registered trademark of Honda Motor Co., Ltd. Briggs & Stratton® is a registered trademark of Briggs & Stratton Corporation. Hypro® is a registered trademark of Pentair Ltd. 86 Diaphragm Kit (Desmopan® ) 9910-KIT1720 9910-KIT1721 9910-KIT1730 9910-KIT1722 9910-KIT1882 9910-KIT1881 9910-KIT1723 9910-KIT1724 9910-KIT1725 –––––––– –––––––– 9910-KIT2423 9910-KIT2423 9910-KIT2479 9910-KIT2480 9910-KIT2100 9910-KIT1734 9910-KIT2113 Diaphragm Kit (Buna-N) –––––––– –––––––– –––––––– –––––––– –––––––– –––––––– –––––––– 9910-KIT2110 9910-KIT2111 9910-KIT2444 9910-KIT2456 –––––––– –––––––– –––––––– –––––––– –––––––– –––––––– –––––––– Est. Weight Ea. Ref. US Units Metric A 6 lbs. 2.7 kg A 8 lbs. 3.6 kg A 16 lbs. 7.3 kg A 21 lbs. 9.5 kg B 11 lbs. 5 kg C 3 lbs. 4 oz. 1.5 kg C 3 lbs. 3 oz. 1.4 kg Valve Kit O-ring Kit 9910-KIT2364 9910-KIT2370 9910-KIT2374 9910-KIT2114 9910-KIT1992 9910-KIT1987 9910-KIT2408 9910-KIT1917 9910-KIT1920 9910-KIT2445 9910-KIT2374 9910-KIT2388 9910-KIT2388 9910-KIT1963 9910-KIT1964 9910-KIT2024 9910-KIT1965 9910-KIT2053 9910-KIT2365 9910-KIT2026 9910-KIT1908 9910-KIT1904 9910-KIT1984 9910-KIT2409 9910-KIT1916 9910-KIT1919 9910-KIT2446 9910-KIT2457 9910-KIT2389 9910-KIT2389 9910-KIT2376 9910-KIT2378 9910-KIT2347 9910-KIT1972 9910-KIT2349 Model 9910-KIT1640 • For Pump Models 9910-D30, D303 and D403 • 6:1 gear box • For standard 5.5 hp gas engine with 3⁄4" shaft • Can be used with 9910-D50, D503 and D813, providing that pumps are operated at lower pressures that do not exceed 5 hp gas engine compatibility. • Weight: 6.5 lbs./2.9 kg Model 9910-KIT1642 • For Pump Models 9910-D50, D503, D813, D1064 and D1265 • 6:1 gear box • For standard 8-18 hp gas engine with 1" shaft • Weight: 8.5 lbs./3.9 kg Model 8000-0056 • For Pump Models 9910-D30, D403, D50, and D503 • New and improved bolt-through pinion gear to help prevent keyway fretting and seizing • Engine mounting flange designed for ease of assembly with standard tools • Robust 6:1 gear design for increases longevity • Increased oil capacity • Made for use on gas engines with 3/4” shaft • Available pre-assembled on HRGI models Hydraulic Flange Kits Model 9910-HYD5312 • Fits Diaphragm Pump Models 9910-D30, D50, D303, D403, D503, D813, D1064 and D1265 • Includes: one flange with SAE “A" 2 bolt, one 1" hollow shaft and two bolts Model 9910-HYD1570 • Fits Diaphragm Pump Models 9910-D160 and D250 • Includes: one flange with SAE “A" 2 bolt, one 1" coupling and hardware for mounting Model 9910-HYD2495 • Fits Diaphragm Pump Models 9910-D70, D115 • Includes: one flange with SAE “A" 2 bolt, one 1" coupling, two pins, spacer and hardware for mounting Model 9910-KIT55357 • Fits Diaphragm Pump Models 9910-DP423, DP573 & DP763 • Includes: one flange with SAE “A" 2 bolt, one 1" coupling and hardware for mounting 87 DIAPHRAGM PUMPS Pump and Gear Reduction Kits Diaphragm Control Units 1 2 7 8 Ref # Model For Pump Model 1 9910-GS25 9910-DP423 2 9910-GS35S 9910-DP573 & 9910-DP763 3 9910-KIT1990 9910-D252 4 9910-GS40GI 9910-D30 & 9910-D50 5 9910-GR40 9910-D303 & 9910-D403 6 9910-RM40 9910-D503 7 9910-GS50GI 9910-D813, 9910-D1064, 9910-D1265 & 9910-D1516 8 9910-VDR50 9910-D813, 9910-D1064 & 9910-D1265 3300-0087 3 4 9 10 5 6 11 12 Includes Max Flow Max Pressure Weight Pressure gauge, adjustable high pressure relief valve, 1⁄2" HB outlet with ball valve shutoff, bypass lever, 3⁄4” HB bypass, 1” HB inlet Pressure gauge, adjustable high pressure relief valve, two 1/2” HB outlet with ball valve shutoff, bypass lever, 3/4” HB bypass, 1” HB inlet One adjustable relief valve, one pressure/bypass selector, 5⁄8" HB bypass port and 3⁄8" HB outlet Pressure gauge, one adjustable high pressure relief valve, one complete bypass lever, two 1⁄2"" HB outlets with individual shut-offs, and 3⁄4"" hose barb bypass; Remote mounting kit: 9910-KIT1741 Pressure gauge, adjustable high pressure relief valve, complete bypass lever, 2-1⁄2"" pressure gauge, two 1⁄2"" hose barb outlets with individual shut-offs, and 5 ⁄8"" hose barb bypass; Remote mounting kit: 9910-KIT1741 Pressure gauge, one adjustable high pressure relief valve, one complete bypass knob, two 1⁄2" HB outlets with individual shut-offs, and 1" hose barb bypass; Remote mounting kit: 9910-KIT1897 (Includes: mounting bracket, bolts, and hose barb) Pressure gauge, one adjustable high pressure relief valve, one complete bypass lever, three 1⁄2" HB outlets with individual shut-offs, and 1" hose barb bypass; Remote mounting kit: 9910-KIT1742 (Includes: mounting bracket, bolts, and hose barb) Pressure gauge, one adjustable high pressure relief valve, one complete bypass lever, two 1⁄2" HB outlets with individual shut-offs, and 1" hose barb bypass; For additional ball valve, order Part Number 9910-130491 11 gpm (42 lpm) 24 gpm (90.8 lpm) 6 gpm (22.7 lpm) 290 psi (20 bar) 290 psi (20 bar) 290 psi (20 bar) 2 lbs. (0.9 kg) 3 lbs. (1.4 kg) 1 lb. (0.5 kg) 21 gpm (79.5 lpm) 580 psi (40 bar) 3.5 lbs. (1.6 kg) 11 gpm (42 lpm) 580 psi (40 bar) 2 lbs. (0.9 kg) 24 gpm (90.8 lpm) 580 psi (40.0 bar) 3.5 lbs. (1.6 kg) 48 gpm (181.7 lpm) 725 psi (50 bar) 8.5 lbs. (3.6 kg) 35 gpm (132.5 lpm) 725 psi (50 bar) 3.5 lbs. (1.6 kg) 7 lbs. (3.2 kg) One built-in relief valve, one 1" HB inlet, three 3 ⁄4", 1⁄2" and 3 ⁄8" HB outlets with individual shut-offs; Model-0088 includes a main bypass lever 42.5 gpm (160.9 lpm) 290 psi (20 bar) 3300-0088 9910-D70, 9910-D115, 9910-D135 & 9910-D160 10 3300-0082 9910-D250 Pressure gauge, one built-in adjustable relief valve, one main shut-off and complete bypass lever, four 3⁄4" HB outlets with individual shut-offs, and 1-1⁄2" hose barb bypass 66 gpm (249.8 lpm) 290 psi (20 bar) 18 lbs. (8.2 kg) 11 9910-BMH50 Directional control unit with working pressure regulating valve, single lever for partial or total closure and discharge and glycerine-bath pressure gauge with colored dial 41 gpm (155.2 lpm) 725 psi (50 bar) 6.6 lbs. (3.0 kg) 12 9910-GH50 Working pressure regulating valve, bypass control lever and glycerine-bath pressure gauge with colored dial 52.8 gpm (200 lpm) 725 psi (50 bar) 8.25 lbs. (3.7 kg) 9 9910-DBS110 9910-DBA110, 9910-DBS140 9910-DBA140, 9910-DBS160 9910-DBA160, 9910-DBS200, & 9910-DBA200 88 7.75 lbs. (3.5 kg) Bypass Pump Demand Pump Demand Switch Assembly Bypass Assembly Pressure Adjust Screw Pressure Adjust Screw Bypass Spring and Check No Bypass No Pressure Switch Discharge Check Valve Only Discharge Check Valve Common Uses: Applications with a set flow and pressure requirement. Example: Spray wands on spot sprayers. Common Uses: Applications where a wide range of flows and pressures may be required. Example: Spray bar with multiple nozzles, all controlled independently. How it Works: When the operator shuts off the wand, pressure in the line increases to a set point and the pressure switch shuts off the motor. A check valve inside the pump keeps trapped pressure in the line. When the wand is turned back on, pressure in the line decreases. The pressure falls below the set point that then restarts the pump. How it Works: The pump continues to run regardless of pressure in the system. For the spray bar example, the flow rate is different when one nozzle is turned on as opposed to having two or more turned on. As nozzles are turned off, excess flow is bypassed within the pump. Sizing the Pump: Select a pump with a pressure and flow point that is matched to the orifice size in the wand. Sizing the Pump: Size the pump for the maximum flow rate required with all nozzles spraying. Pros: Saves wear and tear on the pump Pros: Prevents on/off cycling of pump which can lead to early failure Extends the service life of the battery Cons: If the discharge valve is closed for too long, overheating and damage can occur Cons: Can be difficult to use with variable rate hand operated spray wands & guns Constant amp draw can reduce battery power life 89 49 SHURFLO PUMPS Demand vs Bypass BypassPump Pump Shurflo 5000 Series Diaphragm Pump ® 5 GPM Bypass and Automatic-Demand Pumps 12 VDC The field-proven Shurflo 5.3 gpm [20.1 L/min] pump delivers 3.8 gpm at 40 psi [14.4 L/min at 2.75 bar] with current draw of 14 amps. This pump is designed with a Santoprene® diaphragm for chemical resistance and maximum life, as well as Viton® valves for maximum chemical resistance. Also included is a built-in pressure switch, set at 60 PSI [4.14 bar], which protects the pump in the event of dead-heading. The pump is available in the same footprint as other Shurflo pumps, allowing users to upgrade to a higher performance on existing installations. Bypass • Field-proven pump head design • Driven by a 12-volt, sealed motor • Self-priming up to 8 feet [2.4 m] • Santoprene® diaphragm for chemical resistance and maximum life • Viton® valves provide maximum chemical resistance • Automatic demand versions with built-in pressure switch, set at 60 psi [4.14 bar], protects the pump in the event of dead-heading • Bypass versions set at 90 psi (5.86 bar), protects the pump in the event of dead heading Demand • Available in the same footprint as other Shurflo pumps, allowing users to upgrade to a higher performance on existing installations Order Information - Bypass 12VDC Bypass 12VDC Max LPM 20.1 Max PSI 90 Max BAR 6.2 Port Size Max Draw 5059-3611-D011 Max GPM 5.3 1/2” npsm* 20.9 5059-3610-D011 5.3 20.1 90 6.2 1/2” NPTF 20.9 Part Number * 1/2" -14 American National Standard Straight Pipe Thread ** For retail box: change "-D011" to "-D012" Order Information - Demand 12VDC PSI GPM BAR L /min 5059-3611-D011 5059-3610-D011 0 10 20 30 40 50 60 70 80 90 5.3 4.7 4.3 4.1 3.4 2.6 1.8 1.1 0.4 0.0 0 .7 1.4 2.1 2.8 3.4 4.1 4.8 5.5 6.2 20.1 17.8 16.3 15.5 12.9 9.8 6.8 4.2 1.5 0.0 Amps Model PSI GPM BAR L /min Amps 5059-1311-D011 5059-1310-D011 0 10 20 30 40 50 60 5.3 4.7 4.3 4.1 3.8 3.6 3.4 0 .69 1.38 2.07 2.75 3.45 4.14 20.1 17.8 16.3 15.5 14.4 13.6 12.9 6.5 9.0 11.8 12.4 14.0 15.4 17.0 6.5 9.0 10.2 12.0 13.5 15.2 16.9 18.5 20.1 20.9 Demand 12VDC Max LPM 20.1 Max PSI 60 Max BAR 3.4 Port Size Max Draw 5059-1311-D011 Max GPM 5.3 1/2" npsm* 17.0 5059-1310-D011 5.3 20.1 60 3.4 1/2" NPTF 17.0 Part Number Model * 1/2" -14 American National Standard Straight Pipe Thread ** For retail box: change "-D011" to "-D012" Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair Ltd. 90 Automatic-Demand Pumps 12 VDC The 8000 Series diaphragm pump is Shurflo’s most widely used agriculture pump. Viton® valve material assures maximum chemical resistance. The unique conical valve design delivers high flow rates at maximum discharge pressures, making the 8000 Series the pump of choice for sprayers used on the farm or around the yard. These 12 VDC pumps deliver up to 1.8 GPM [6.8 L/min] providing maximum performance in a wide range of applications. 8000-543-236 • Self-priming up to 8 vertical feet [2.4m] • Chemical-resistant materials • Designed for heavy-duty spraying and fluid transfer applications • Can run dry without damage 8000-543-936 Order Information Part Number Max Max Max Max GPM LPM PSI BAR Port Size • Built-in check valve Max Draw Description Model ® All Viton Pump: 8000-343-236 1.2 4.5 60 4.1 3⁄8" NPTFemale 5.8 Viton valves, Viton diaphragm, 60 PSI (4.1 bar) demand switch 8000-541-236* 1.0 3.8 60 4.1 3⁄8" NPTFemale 3.8 Viton® valves, Santoprene® diaphragm, 60 PSI (4.1 bar) demand switch 8000-542-136 1.2 4.5 60 4.1 1⁄2" MSPTMale 6.0 Viton® valves, Santoprene® diaphragm, 60 PSI (4.1 bar) demand switch 8000-543-136 1.8 6.8 60 4.1 1⁄2" MSPTMale 7.3 Viton® valves, Santoprene® diaphragm, 60 PSI (4.1 bar) demand switch 8000-543-236* 1.8 6.8 50 3.4 3⁄8" NPTFemale 6.4 Viton® valves, Santoprene® diaphragm, 60 PSI (4.1 bar) demand switch 8000-543-238 1.8 6.8 100 6.9 3⁄8" NPTFemale 8.7 Viton® valves, Santoprene® diaphragm, 100 PSI (6.9 bar) demand switch 8000-543-138 1.8 6.8 100 6.9 1⁄2" MSPTMale 8.7 Viton® valves, Santoprene® diaphragm, 100 PSI (6.9 bar) demand switch 8000-543-936* 1.8 6.8 50 3.4 3⁄8" NPTFemale 6.4 7.0 Santoprene® diaphragm, 100 PSI (6.9 bar) demand switch with internal bypass 6.8 Buna valves, Geolast® diaphragm, 60 PSI (4.1 bar) demand switch 8000-547-189 1.8 6.8 107 7.4 1/2" MSPT Male 8000-643-236 1.8 6.8 60 4.1 3⁄8" NPTFemale 8030-813-239 1.6 6.1 150 9.5 3⁄8" NPT- 12.0 Female ® ® Lawn and Garden Pump: Low Flow Standard Pump: Standard Pump: Standard Pump: High Pressure Pump: High Pressure Pump: 8000-343-236 8000-541-236 8000-542-136 8000-543-136 8000-543-236 8000-543-238 8000-543-138 Standard Pump w/Wire Harness: 8000-543-936 Viton® valves, Santoprene® diaphragm, prewired with two wire molded connectors, 60 PSI (4.1 bar) demand switch 8000-643-236 High Pressure Pump: Viton®valves, Transfer Pump: High Pressure Pump: Viton® valves, Santoprene® diaphragm, 150 PSI (10.3 bar) demand switch * Packaged in quantities of 6. For single packs, replace "8000-" with "8009." Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair Ltd. 91 8030-813-239 PSI BAR GPM L/min Amps 20 40 50 60 20 30 40 60 20 40 50 60 20 40 50 60 30 40 50 20 40 60 100 20 40 60 100 30 40 50 20 40 50 60 20 30 40 80 100 150 1.4 2.8 3.4 4.1 1.4 2.1 2.8 4.1 1.4 2.8 3.4 4.1 1.4 2.8 3.4 4.1 1.4 2.8 3.4 1.4 2.8 4.1 6.9 1.4 2.8 4.1 6.9 1.4 2.8 3.4 1.4 2.8 3.4 4.1 1.4 2.1 2.8 5.4 6.9 9.5 0.93 0.84 0.80 0.76 0.79 0.75 0.70 0.62 1.11 0.98 0.93 0.90 1.26 1.14 1.08 1.02 1.47 1.41 1.36 1.45 1.31 1.22 0.96 1.45 1.31 1.22 0.96 1.47 1.41 1.36 1.44 1.33 1.27 1.22 1.55 1.49 1.43 1.20 1.10 0.83 3.5 3.2 3.0 2.9 3.0 2.8 2.6 2.3 4.2 3.7 3.5 3.4 4.7 4.3 4.1 3.9 5.5 5.3 5.1 5.5 5.0 4.6 3.6 5.5 5.0 4.6 3.6 5.5 5.3 5.1 5.4 5.0 4.8 4.6 5.9 5.6 5.4 4.5 4.2 3.1 3.9 4.9 5.3 5.8 2.3 2.8 3.2 3.8 4.1 5.1 5.6 6.0 5.0 6.2 6.8 7.3 5.7 5.8 6.4 4.2 5.5 6.5 8.7 4.2 5.5 6.5 8.7 5.7 5.8 6.4 4.1 5.4 6.1 6.8 5.5 6.2 6.8 9.1 10.1 12.0 SHURFLO PUMPS Shurflo 8000 Series Diaphragm Pump ® Shurflo 8000 Series Diaphragm Pumps ® Bypass Pumps 12 VDC 8000 Series internal bypass pumps are ideal for applications where an automatic demand switch is not desired. Pumps with bypass will continue to run without damage once the bypass pressure is reached. They incorporate a triple chamber design with Viton® elastomers to withstand the toughest applications. Perfect for spot sprayers, foam markers and transfer applications where smooth, consistent flow is needed. • Self-priming up to 8 vertical feet [2.4m] 8000-543-250 • Chemical-resistant materials • Internal bypass • Can run dry without damage Order Information Part Number Max Max Max Max GPM LPM PSI BAR 8000-543-250* 1.8 6.8 50 3.4 8000-543-210 1.3 4.9 40 2.8 8000-543-220 1.5 5.7 60 4.1 8006-543-250 1.4 5.3 50 3.4 Port Max Size Draw 3⁄8" NPT5.5 Female 3⁄8" NPT5.5 Female 3⁄8" NPT7.1 Female 3⁄8" NPTFemale 5.5 Description Standard Bypass Pump: Viton® valves, Santoprene® diaphragm, 45 PSI (3.1 BAR) internal bypass Standard Bypass Pump: Viton® valves, Santoprene® diaphragm, 35 PSI (2.4 BAR) internal bypass Standard Bypass Pump: Viton® valves, Santoprene® diaphragm, 60 PSI (4.1 BAR) internal bypass Bypass Pump with Reversed Pumphead: Viton® valves, Santoprene® diaphragm, 45 PSI (3.1 BAR) internal bypass Model 8000-543-250 8000-543-210 8000-543-220 * Packaged in quantities of 6. For single packs, replace "8000-" with "8009." 8006-543-250 PSI BAR GPM L/min Amps 20 30 40 50 10 20 30 40 10 20 30 60 10 20 40 50 1.4 2.1 2.8 4.1 0.7 1.4 2.1 2.8 0.7 1.4 2.1 4.1 0.7 1.4 2.8 4.1 1.30 1.11 0.69 0.18 1.28 1.19 1.07 0.05 1.52 1.45 1.39 1.12 1.40 1.30 0.69 0.18 4.9 4.2 2.6 0.7 4.8 4.5 4.0 0.19 5.7 5.5 5.3 4.2 5.3 4.9 2.6 0.7 4.0 4.7 5.2 5.5 3.8 4.4 5.0 5.5 3.8 4.5 5.2 7.1 3.4 4.0 5.2 5.5 Shurflo 8000 Series Diaphragm Pumps Bypass Pumps 12 VDC Designed to accommodate applications that have external pressure valves plumbed into the system. • Self-priming up to 8 vertical feet [2.4m] • Chemical-resistant materials • 1⁄4” adapter for external bypass hook-up • Can run dry without damage 8000-543-290 Order Information Part Number 8000-543-290 Max Max Max Max GPM LPM PSI BAR 1.8 6.8 100 6.9 Port Size Max Draw Description 3⁄8" NPTFemale 8.8 Front Adapter Pump: Viton® valves, Santoprene® diaphragm, 1⁄4" FNPT adapter mounted on switch ports Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair Ltd. 92 Model PSI BAR GPM L/min Amps 8000-543-290 20 40 60 80 100 1.4 2.8 4.1 5.5 6.9 1.26 1.14 1.02 0.93 0.84 4.7 4.3 3.9 3.5 3.2 5.0 6.2 7.3 8.0 8.8 Bypass and Automatic-Demand Pumps 115 VAC and 230 VAC These Shurflo 8000, 8090 and 8020 Series bypass and demand pumps provide the same reliability as the 12 VDC version, except in a 115 VACor 230 VAC capacity. They are ideal in agricultural applications that require high pressure with flow rates up to 1.6 GPM [6.1 L/min] and low amp draw. They can be mounted in any position, are compact, and are designed for easy maintenance. • Self-priming up to 8 vertical feet [2.4m] 8020-833-238 • Built-in check valve • Chemical-resistant materials 8000-533-250 • Corded pump optional • Can run dry without damage Order Information - Bypass 115 VAC Max GPM Max LPM Max PSI Max BAR Max Port Size Draw 8000-533-250 1.4 5.3 50 3.4 3⁄8" NPT0.54 Female 8020-503-250 1.5 5.7 40 2.8 3⁄8" NPT0.56 Female Part Number Order Information - Demand 115 VAC Part Numbers Max GPM Max LPM Max PSI Max BAR Port Size Bypass 115 VAC Description Bypass Pump: Viton® valves, Santoprene® diaphragm, 45 PSI (3.1 bar) Internal Bypass Bypass Pump with 6’ Power Cord: Viton® valves, Santoprene® diaphragm, 45 PSI (3.1 bar) Internal Bypass Max Draw Description 8000-533-236 1.4 5.3 60 4.1 Standard Demand Pump: 3⁄8" NPT0.64 Viton® valves, Santoprene® diaphragm, 60 PSI Female (4.1 bar) demand switch 8020-513-236 1.5 5.7 60 4.1 3⁄8" NPT0.57 Female 8020-833-238 1.6 6.1 100 6.9 3⁄8" NPT0.95 Female 8030-863-239 1.5 5.7 150 9.7 3⁄8" NPTFemale Standard Demand Pump: Viton® valves, Santoprene® diaphragm, 60 PSI (4.1 bar) demand switch with 6 ft (1.8 m) power cord High Pressure Pump with 6 ft. Power Cord: Viton® valves, Santoprene® diaphragm, 100 PSI (6.9 bar) demand switch 1 High Pressure Pump: Viton® valves, Santoprene® diaphragm,150 PSI (10.3bar) demand switch Order Information - Bypass 230 VAC Part Numbers Max GPM Max LPM Max PSI Max Bar Port Size Max Draw Description 8090-802-289 1.2 4.5 80 5.5 3/8" NPT Female 0.56 Bypass Pump: Viton® valves, Santoprene® diaphragm, 80 PSI (5.5 bar) Internal Bypass 8095-902-260 1.5 5.7 100 6.9 3/8" NPT Female 0.56 Bypass Pump: EPDM valves, Santoprene® diaphragm, 100 PSI (6.9 bar) Internal Bypass Order Information - Demand & Demand/Bypass 230 VAC Part Numbers Max GPM Max LPM Max PSI Max BAR Port Size Max Draw Description 8090-212-246 1.2 4.5 60 4.1 3/8" NPT Female 0.34 Standard Demand Pump: EPDM valves, Santoprene® diaphragm, 60 PSI (4.1 bar) demand switch 8090-801-278 1.3 4.9 100 6.9 3/8" NPT Female 0.56 8090-902-278 1.4 5.3 100 5.5 3/8" NPT Female 0.56 Demand/Bypass Pump: Viton® valves, Santoprene® diaphragm, 80 PSI (5.5 bar) Internal Bypass, 100 PSI (6.9 bar) demand switch Demand/Bypass Pump: EPDM valves, Santoprene® diaphragm, 80 PSI (5.5 bar) Internal Bypass, 100 PSI (6.9 bar) demand switch Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair Ltd. 93 Model 8000-533-250 8020-503-250 PSI BAR GPM L/min Amps 10 30 40 50 10 20 30 40 0.7 2.1 2.8 3.4 0.7 1.4 2.1 2.8 1.36 1.05 0.65 0.19 1.40 1.30 1.10 0.80 5.1 4.0 2.5 0.7 5.3 4.9 4.2 3.0 0.34 0.46 0.51 0.54 0.37 0.44 0.50 0.56 Demand 115 VAC Model 8000-533-236 8020-513-236 8020-833-238 8030-863-239 PSI BAR GPM L/min Amps 20 40 50 60 20 40 50 60 20 40 60 100 20 60 120 150 1.4 2.8 3.4 4.1 1.4 2.8 3.4 4.1 1.4 2.8 4.1 6.9 1.4 4.1 8.3 9.7 1.15 0.97 0.91 0.85 1.15 0.96 0.90 0.84 1.32 1.14 1.07 0.91 1.24 1.04 0.77 0.63 4.3 3.7 3.4 3.2 4.8 4.1 3.6 3.5 5.0 4.3 4.0 3.4 4.7 3.9 2.9 2.4 0.46 0.55 0.60 0.64 0.40 0.49 0.54 0.57 0.45 0.58 0.70 0.95 0.45 0.66 0.92 1.00 SHURFLO PUMPS Shurflo 8000, 8090 and 8020 Series Diaphragm Pumps ® Shurflo 8007 Series Diaphragm Pumps ® Bypass and Automatic-Demand 12 VDC with Electrical Package These models include an aesthetically-pleasing molded assembly, housing a rocker-type manual switch with international on/off switch symbols. Wiring is neatly routed into the molded assembly through form fitting entries and strain relieved inside the housing. Fused versions come with an automotive-type fuse housed under a snug fitting cap marked “fuse.” Nonfused versions have a raised section. • Self-priming up to 8 vertical feet [2.4m] • Chemical-resistant materials • Internal bypass option • Can run dry without damage 8007-543-850 (Front and Back Shown) • Built-in on/off switch included • 2 pin connector on power leads • Available with or without integral fuse • Rocker switch protected from the elements by a clear boot Bypass 12VDC Order Information -Bypass 12VDC Part Number 8007-543-850 Max Max Max Max GPM LPM PSI BAR 1.8 6.8 50 Port Size Max Draw 3⁄8" 3.4 NPT- 5.5 Female Description Bypass Pump w/Electrical Package: Viton® valves, Santoprene® diaphragm, 45 PSI (3.1 bar) bypass, Manual on/off switch 2 pin connector and fuse Order Information -Demand 12VDC Max Max Max Max Part Number GPM LPM PSI BAR 8007-591-236 1.0 3.8 50 3.4 8007-593-836 1.8 6.8 50 3.4 8007-543-836 1.8 6.8 50 3.4 Port Max Description Size Draw 3⁄8" NPT- 3.7 Female Demand Pump w/Electrical Package: Viton® valves, Santoprene® diaphragm, 3⁄8" 60 PSI (4.1 bar) Demand Switch NPT- 6.4 Manual on/off switch 2 pin connector Female (8007-543-836 includes fuse) 3⁄8" NPT- 6.4 Female Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair Ltd. 94 Model PSI BAR GPM L/min Amps 8007-543-850 10 20 30 40 50 0.7 1.4 2.1 2.8 3.4 1.40 1.30 1.11 0.69 0.18 5.3 4.9 4.2 2.6 0.7 3.4 4.0 4.7 5.2 5.5 PSI BAR GPM L/min Amps 30 40 50 30 40 50 30 40 50 2.1 2.8 3.4 2.1 2.8 3.4 2.1 2.8 3.4 0.74 0.69 0.65 1.47 1.41 1.36 1.47 1.41 1.36 2.8 2.6 2.5 5.5 5.3 5.1 5.5 5.3 5.1 2.9 3.2 3.7 5.3 5.8 6.4 5.3 5.8 6.4 Demand 12VDC Model 8007-591-236 8007-593-836 8007-543-836 Automatic-Demand Pump 12 VDC with Electrical Package These models include an aesthetically-pleasing molded assembly, housing a rocker-type manual switch with international on/off switch symbols. Wiring is neatly routed into the molded assembly through form fitted entries and strain relieved inside the housing. • Self-priming up to 12 vertical feet [3.7m] • Chemical-resistant materials • Can run dry without damage • Rocker switch protected from the elements by a clear boot • Built-in on/off switch included • 2 pin connector on power lead 2087-593-135 (Front and Back Shown) Order Information Max Max Max Max GPM LPM PSI BAR Part Number 2087-593-135 † 3 11.4 50 3.4 Port Size 1⁄2" MSPT* Male Max Draw Description 8 Standard Demand Pump: Viton® valves, Santoprene® diaphragm, 45 PSI (3.1 bar) demand switch Model PSI BAR GPM L/min Amps 2087-593-135 10 20 30 40 50 0.7 1.4 2.1 2.8 3.4 2.80 2.69 2.36 2.05 1.42 10.6 10.2 8.9 7.8 5.4 5.3 5.5 6.7 7.7 8.0 * 1⁄2" - 14 National American Straight Pipe Thread † Packaged in quantities of 6. For single pack, replace "135" with "435." Shurflo 2088 Series Diaphragm Pumps Automatic-Demand Pump 12 VDC Shurflo 2088 Series diaphragm pumps deliver reliable performance in high flow, moderate pressure applications. They are used in a variety of spot spraying, multinozzle spraying and fertilizer drip applications that require flows of up to 3.6 GPM [13.6 L/min]. They are available in a variety of chemical-resistant materials. • Self-priming up to 12 vertical feet [3.7m] • Chemical-resistant materials • Can run dry without damage • Automatic demand 2088-343-135 • Built-in check valve (varies by model) prevents back flow of fluid into the solution tank • Continuous duty motor on fin-cooled version Order Information Part Number Max Max Max Max GPM LPM PSI PSI Port Size Max Draw Description Model 2088-313-145 3.6 13.6 40 2.8 1⁄2" MSPT* Male 9.5 Standard Pump: with fin cooled motor Viton® valves, Santoprene® diaphragm, 45 PSI ( 3.1 bar) demand switch 2088-313-145 2088-443-144 3.5 13.2 45 3.1 1⁄2" MSPT* Male 9.1 Standard Pump: Santoprene® valves, Santoprene® diaphragm, 45 PSI ( 3.1 bar) demand switch 2088-443-144 2088-343-135† 3 11.4 40 2.8 1⁄2" MSPT* Male 7.7 Standard Pump: Viton® valves, Santoprene® diaphragm, 45 PSI ( 3.1 bar) demand switch * ⁄2" - 14 National American Straight Pipe Thread † Packaged in quantities of 6. For single pack, replace "135" with "435." Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair Ltd. 1 95 2088-343-135 PSI BAR GPM L/min Amps 10 20 30 40 10 20 30 40 10 20 30 40 0.7 1.4 2.1 2.8 0.7 1.4 2.1 2.8 0.7 1.4 2.1 2.8 3.09 2.82 2.49 2.15 2.83 2.56 2.31 2.02 2.80 2.69 2.36 2.05 11.7 10.7 9.4 8.1 10.7 9.7 8.7 7.6 10.6 10.2 8.9 7.8 6.4 7.6 8.7 9.5 5.8 7.0 8.0 9.1 5.3 5.5 6.7 7.7 SHURFLO PUMPS Shurflo 2087 Series Diaphragm Pumps ® Shurflo 2088 Series Diaphragm Pumps ® No Control Pumps 12 VDC Shurflo 2088 Series diaphragm pumps deliver reliable performance in high flow, moderate pressure applications. They are used in a variety of spraying and transferring applications that require flows of up to 3.3 GPM [12.5 L/min]. They are available in a variety of chemical-resistant materials. They can be mounted in any position and are designed for easy maintenance. • Self-priming up to 12 vertical feet [3.7m] 2088-343-500 • Chemical-resistant materials • Can run dry without damage • Built-in check valve (may vary by models) prevents back flow of fluid through the pump Order Information Part Number Max Max Max Max GPM LPM PSI BAR Port Size Max Draw Model Description Front Adapter Pump with Electrical Package: Viton® valves, Santoprene® diaphragm, 1⁄4" FPT adapter mounted on switch port, built-in on/off power switch, fuse holder pre-wired w/2-wire molded connector, no demand switch 2088-343-170 3.3 12.5 50 3.4 1⁄2" MSPT* Male 2088-343-500 3.3 12.5 50 3.4 1⁄2" Front Adapter Pump: Viton® valves, Santoprene® MSPT* 10.1 diaphragm, 1⁄4" FPT adapter mounted on switch port, no demand switch Male 9.1 2088-343-170 2088-343-500 PSI BAR GPM L/min Amps 10 30 40 50 10 30 40 50 0.7 2.1 2.8 3.4 0.7 2.1 2.8 3.4 3.00 2.38 2.14 1.86 2.79 2.26 1.99 1.69 11.3 9.0 8.1 7.0 10.6 8.6 7.5 6.4 5.0 7.5 8.3 9.1 5.8 8.3 9.3 10.1 * 1⁄2" - 14 National American Straight Pipe Thread Shurflo 2088 Series Diaphragm Pumps Automatic-Demand Pumps 115 & 230 VAC These Shurflo 2088 Series pumps offer the same reliability as the 12 VDC version except in 115 or 230 VAC capacity. They are used in a variety of spot spraying, mini-bulk transfer and fertilizer applications that require flows of up to 3.2 GPM [12.1 L/min]. They are available in a variety of chemical-resistant materials. • Self-priming up to 12 vertical feet [3.7m] • Chemical-resistant materials 2088-394-144 • Automatic demand • Built-in check valve (may vary by model) prevents back flow of fluid into the solution tank Order Information Part Number • Can run dry without damage Max Max Max Max GPM LPM PSI BAR Port Size Max Draw Description Model 2088-394-144 3 11.4 40 2.8 1⁄2" MSPT* Male 0.7 115 VACPump with 6' power cord: Viton® valves, Santoprene® diaphragm, 45 PSI (3.1 bar) demand switch 2088-394-144 2088-394-154 3.2 12.1 40 2.8 1⁄2" MSPT* Male 0.98 115 VAC Pump: Viton® valves, Santoprene® diaphragm, 45 PSI (3.1 bar) demand switch 2088-394-154 2088-564-144 3.0 11.3 50 3.4 1/2" MSPT* Male 0.6 230 VAC Pump: Santoprene® valves, Santoprene® diaphragm, 45 PSI (3.1 bar) demand switch * 1⁄2" - 14 National American Straight Pipe Thread Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair Ltd. 96 2088-564-144 PSI BAR GPM L/min Amps 10 20 30 40 10 20 30 40 10 20 30 40 50 0.7 1.4 2.1 2.8 0.7 1.4 2.1 2.8 0.7 1.4 2.1 2.8 3.4 2.40 2.20 1.90 1.60 2.71 2.41 2.10 1.84 2.80 2.50 2.20 2.00 1.70 9.1 8.3 7.2 6.0 10.2 9.1 8.0 7.0 10.6 9.5 8.3 7.6 6.4 .55 .60 .65 .70 .65 .77 .89 .98 0.35 0.45 0.50 0.55 0.60 Air-Driven Pumps The Shurflo 166 air-operated demand pumps employ a dual diaphragm design, with a patented fast action switching mechanism allowing for consistent flow and pressure. They are built for the toughest pumping applications and are available in a variety of elastomers that allow them to be compatible with most caustic or acidic fluids. Ideal for chemical transfer, liquid fertilizer injection and agricultural spraying. 2 chamber dual diaphragm • Positive displacement • On-demand operation 166-200-36 • Chemical-resistant polypropylene body • 30 to 60 PSI [2.1-4.1 bar] Order Information 166-200-36 Max GPM 0.6 Max LPM 2.3 Max Max PSI BAR 30-60 2.1-4.1 166-200-46 0.6 2.3 30-60 2.1-4.1 Buna valves and diaphragm 166-200-56 0.6 2.3 30-60 2.1-4.1 EPDM valves and diaphragm 166-200-57 0.6 2.3 30-60 2.1-4.1 Santoprene® valves and diaphragm Part Number Description Viton valves and diaphragm ® Shurflo Power Twin Pump Demand Pumps 12VDC Take all the performance and features of the time-tested 2088 series, double it, and the result is the high-flow Power Twin. Delivers an open flow of 6.25 GPM [23.7 L/min] at a mere 8.7 amps. At 40 PSI [2.8 bar], it delivers 3.5 GPM [13.2 L/min] and draws only 17.2 amps. One of the most efficient high-flow self-priming pumps available today, the Power Twin is excellent for transferring, light-duty spraying, and use as a 1:1 proportioning pump. • Up to 6.25 GPM [23.7 L/min] • Thermally-protected motor with heat sink • Self-priming up to 7 vertical feet (2.13 m) 4211-035 Max Max Max Max Port Max GPM LPM PSI BAR Size Draw 4111-035 6.25 23.7 40 4211-035 6.25 23.7 40 94-389-00 94-389-01 • Long-life pressure switch • Intake/Discharge manifold optional Order Information Part Number • Quiet, balanced operation Description Model Viton® valves, Santoprene® diaphragm, 1⁄2" 2.8 17.2 45 PSI ( 3.1 bar) demand switch, MPT manifold with 5⁄8" barb ports 1⁄2" Viton® valves, Santoprene® diaphragm, 2.8 17.2 MPT 45 PSI ( 3.1 bar) demand switch Manifold Kit 5⁄8” barb (2) per pump Manifold Kit 3⁄4” barb (2) per pump Viton is a registered trademark of DuPont. Hypro is a registered trademark of Pentair Ltd. ® ® 97 4111-035 4211-035 PSI BAR GPM L/min Amps 0 10 20 30 40 0 10 20 30 40 0 0.7 1.4 2.1 2.8 0 0.7 1.4 2.1 2.8 6.25 5.7 5.0 4.3 3.5 6.25 5.7 5.0 4.3 3.5 23.5 21.6 19.0 16.2 13.2 23.5 21.6 19.0 16.2 13.2 8.7 12.2 14.5 16.1 17.2 8.7 12.2 14.5 16.1 17.2 SHURFLO PUMPS Shurflo 166 Series Diaphragm Pumps ® Shurflo 9300 Series Submersible Pumps ® 24 VDC The Shurflo 9300 series pump offers a solution to your remote water pumping needs. It’s rugged, durable and built to last. This pump delivers a steady 1.0 GPM [3.8 L/min] operating at 100 PSI [6.9 bar] maximum at 230 feet [70.1m]. It incorporates a unique, waterblocked cable connector that is impervious to water leakage and condensation problems preventing waterwicking. Great for applications in livestock watering, irrigation, ponds, islands, remote homes and cabins • Fits wells 4 inches [10.2 cm] in diameter and larger 902-100 Controller Features: • Accepts a variety of jacketed cables from your power source Boost your DC solar pump’s performance by up to 30%. Controller optimizes your solar water pumping system by translating the current and voltage available from your photovoltaic panels, into a combination that is better matched to that needed by the pump. With the optional float switch installed, the controller will automatically stop pumping when the reservoir is full. * Operates on 24 VDC * Increases daily water output up to 30% * System starts pumping earlier in the morning * System stops pumping later in the evening * Protects pump from low or high volume conditions * Terminals for float switch • Runs dry without damage • Corrosion-proof housing with stainless steel fasteners • Long-life, 24 VDC operation • Quick disconnect for easy installation and service 902-200 Controller Features: Includes all 902-100 features plus: * Switch selectable for 12 VDC or 24 VDC operation * Manual Pump On / Off switch for easy pump maintentance * Watertight enclosure and cable inlets * Includes high/low water level monitor mode with probes and cable so the pump will not run when the well water is too low Order Information Max Max Max GPM LPM Draw Part Number 9325-043-101 1.8 6.8 Model 4.1 Description EPDM valves, Santoprene® diaphragm Max. Min. Startup Array Max. Shutdown Input Voltage Output Voltage Voltage Current 12V 24V 12V 24V Description 902-100 (LCB-GO) 902-200 (LCB-G) 9300 DC Pump Controller 45 V 9300 DC Pump Controller 45 V N/A N/A 25 V N/A 28 V 5 Amps 25 V 12.5 V 28 V 7 Amps Model 9325-043-101 Shurflo 3000 Series Submersible Pumps 12 VDC Vertical Lift Feet 20 60 100 140 180 230 Meters 6.1 18.3 30.5 42.7 54.9 70.1 GPH 117 109 103 99 93 82 LPH 443 413 390 375 352 310 Solar Array Watts 58 78 99 115 135 155 Current Amps 1.5 2.1 2.6 3.1 3.6 4.1 The 3000 Series is suitable for a variety of uses from pumping water to changing oil in cars, trucks and farm equipment. Pumps incorporate thermal overload protection. Not intended for use with flammable liquids or in flammable environments. Order Information Part Number 3000-350 Model 3000-350 PSI BAR 0 5 10 0.0 0.3 0.7 Max GPM 2.5 Max LPM 9.5 Dischg. Ft of Head 0.0 11.5 23.0 Max PSI 10 Max BAR 0.7 Max Draw 7.4 GPM L/min Amps 3.8 3.4 2.5 14.4 12.9 9.5 6.5 7.1 7.4 • Self-priming to 7.5 feet [2.3m] vertical • Maximum head of 28 feet [8.5m] (12 PSI [.83 bar]) • Liquid temps from 40° F to 185° F [4.4°C to 85°C] • Thermal overload protection • Stainless steel shaft • BUNA-N impeller and lip seal • Built-in reverse switch and 8 foot [2.4m] cable with battery clips 98 12 and 24 VDC Demand Pumps The Shurflo SLV is ideal for low volume, intermittent-duty applications requiring a compact pump with low power consumption. Unique design has no metals in the fluid path for maximum chemical resistance. Pump features include automatic demand operation and elastomers that handle a wide variety of chemicals. Perfect for low volume spraying and transfer. Cost effective yet with high performance and reliability; the SLV offers tremendous value. • Automatic demand; 25 PSI [1.72 bar] on/40 PSI [2.8 bar] • Self-priming up to 2.5 vertical feet [.76 m] • Long-life pressure switch SLV10-AA48 (Front and Back Shown) • Thermally-protected ball bearing motor with splash-proof housing • Internal fan radiates heat; external heat sink not required • Integral on/off switch optional Order Information - Automatic Demand Pumps 12 VDC Max Max Max Max GPM LPM PSI BAR Part Number Port Size Automatic Demand Pumps 12 VDC Max Draw Description Model SLV10-AA40 1 3.8 30 2.1 3⁄8" Barb 2.5 Viton valves, Santoprene diaphragm, 40 PSI ( 2.8 bar) demand switch, Integral on/off switch included SLV10-AA40 SLV10-AA41 1 3.8 30 2.1 3⁄8" Barb 2.5 Viton® valves, Santoprene® diaphragm, 40 PSI ( 2.8 bar) demand switch SLV10-AA41 SLV10-AA48* 1 3.8 30 2.1 3⁄8" Barb 2.5 Viton® valves, Santoprene® diaphragm, 40 PSI ( 2.8 bar) demand switch, Manual switch and 2 pin connector 12VDC SLV10-AA48 ® ® PSI BAR GPM L/min Amps 3 10 20 30 3 10 20 30 3 10 20 30 0.2 0.7 1.4 2.1 0.2 0.7 1.4 2.1 0.2 0.7 1.4 2.1 0.90 0.73 0.62 0.49 0.90 0.73 0.62 0.49 0.90 0.73 0.62 0.49 3.4 2.8 2.3 1.9 3.4 2.8 2.3 1.9 3.4 2.8 2.3 1.9 1.8 2.1 2.3 2.5 1.8 2.1 2.3 2.5 1.8 2.1 2.3 2.5 L/min 3.4 2.8 2.3 1.9 Amps 0.89 1.00 1.15 1.23 * Packaged in quantities of 6, for single pack, add suffix "AB" (i.e.: SLV10-AA48-AB). Order Information - Automatic Demand Pump 24 VDC Automatic Demand Pump 24 VDC Max Max Max Max Part Number GPM LPM PSI BAR Port Size Max Draw Description SLV10-AB41 3⁄8" Barb 1.23 Viton® valves, Santoprene® diaphragm, 40 PSI ( 2.8 bar) demand switch 1 3.8 30 2.1 Part # SLV10-HA01 1 3.8 30 2.1 Port Max Size Draw 3⁄8" Barb 2.5 SLV10-AB41 PSI 3 10 20 30 BAR 0.2 0.7 1.4 2.1 GPM 0.90 0.73 0.62 0.49 No Control Transfer Pump 12 VDC Order Information - No Control Transfer Pump 12 VDC Max Max Max Max GPM LPM PSI BAR Model Description Model PSI BAR GPM L/min Amps Viton® valves, Geolast® diaphragm, No demand switch SLV10-HA01 3 10 20 30 0.2 0.7 1.4 2.1 0.90 0.73 0.62 0.49 3.4 2.8 2.3 1.9 1.8 2.1 2.3 2.5 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair Ltd. 99 SHURFLO PUMPS Shurflo SLV Series Diaphragm Pumps ® Shurflo Accessories ® Drill Pump Attaches to any standard 1⁄4” [6.35 mm] drill motor. Ideal for pumping water from appliances, aquariums, water beds, sinks, toilets or drums. Includes a 1⁄4” [6.35 mm] oil probe that easily allows the transfer of oil from cars, trucks, lawn and garden equipment. Not intended for use with flammable liquids or in flammable environments. • Self-priming to 8 feet [2.4m] vertical • Pumps liquids 40° F to 120° F [4.4° C to 48.8° C] • BUNA impeller and seals • 1⁄4” [6.35 mm] shaft fits standard drills Order Information Part Number Max GPH Max LPH Port Size Shaft Size 3010-000 200 757 3⁄4" (M) GHT 1⁄4" Oil Change System Makes a messy job clean and easy. Simply install the oil probe in the engine oil dipstick tube, attach the battery clips, and flip the switch. Oil is safely removed and stored in the easy to carry container. Oil should be heated to 140°F for maximum pump efficiency. • Complete with necessary tubing and oil storage container • 8 foot cable with battery clips • Thermal overload protection Order Information Model Description 8050-305-426 Oil Change System Heat Sink Bowl-Style Strainers Order Information Model Description 34-007 5" [12.7 cm] Heat Sink to assist cooling in Continuous-duty applications 34-006 3" [7.6 cm] Heat Sink to assist cooling in Continuous-duty applications 100 Model Description 255-223 255-313 255-323 255-646 255-568 255-613 255-623 255-413 50 Mesh screen, 1⁄2" Barb Inlet x 1⁄2 NPSM Female Outlet 50 Mesh screen, 1⁄2" NPSM Male Inlet x 1⁄2 NPSM Female Outlet, EPDM O-ring 50 Mesh screen, 1⁄2" Barb Inlet x 1⁄2 NPSM Female Outlet, EPDM O-ring 50 Mesh screen, 3⁄8" x 3⁄8" MNPT Poly/Nylon, Viton® O-ring 50 Mesh screen, 3⁄8" x 3⁄8" MNPT Poly/Nylon, EPDM O-ring 50 Mesh screen, 1⁄2" NPSM Male Inlet x 1⁄2 NPSM Female Outlet, Viton® O-ring 50 Mesh screen, 1⁄2" Barb Inlet x 1⁄2 NPSM Female Outlet, Viton® O-ring 50 Mesh screen, 1⁄2" NPSM Male Inlet x 1⁄2 NPSM Female Outlet, Buna O-ring Shurflo Fittings SHURFLO PUMPS ® Barb Tee Part Number Description 8-126-00 1⁄2" [12mm] Barb Tee - Polypro Barb Tee X Pipe Part Number Description T3812T 3⁄8" [10mm] MNPT-Male x 1⁄2" Barb Tee - Nylon 3T3812T 3⁄8" [10mm] MNPT-Male x 1⁄2" Barb Tee - Poly Swivel Hex Wingnut Straight Part Number Description 234-2916 234-2926 234-2936 234-2946 1⁄2" [12mm] NPT-Female 1⁄2" [12mm] NPT-Female 1⁄2" [12mm] NPT-Female 1⁄2" [12mm] NPT-Female x x x x 3⁄8" [10 mm] Barb - Polypro 1⁄2" [12 mm] Barb - Polypro 5⁄8" [16 mm] Barb - Polypro 3⁄4" [19 mm] Barb - Polypro Swivel Hexnut Elbow Part Number Description 234-3926 244-3366 234-3916 234-3946 234-3936 1⁄2" [12mm] NPT-Female x 1⁄2" [12 mm] Barb Swivel Hexnut Elbow - Polypro 1⁄2" [12mm] NPT-Female x 1⁄2" [12 mm] NPT Male Swivel Hexnut Elbow Adaptor - Nylon 1⁄2" [12mm] NPT-Female x 3⁄8" [10 mm] Barb Swivel Hexnut Elbow - Polypro 1⁄2" [12mm] NPT-Female x 3⁄4" [19 mm] Barb Swivel - Polypro 1⁄2" [12mm] NPT-Female x 5⁄8" [16 mm] Barb Swivel - Polypro *Fitting available only in nylon – CHECK COMPATIBILITY. Barbed X Pipe Straight Part Number Description 8-005-01 8-007-01 244-5126 3⁄8" [10mm] NPT-Male x 3⁄8" [10 mm] Barb - Polypro 3⁄8" [10mm] NPT-Male x 1⁄2" [12 mm] Barb - Polypro 1⁄2" [12mm] NPT-Male x 1⁄2" [12 mm] Barb - Nylon Barbed X Pipe Elbow Part Number Description 8-006-01 244-6128 3⁄8" [10mm] NPT-Male x 3⁄8" [10 mm] Barb - Poly 3⁄8" [10mm] NPT-Male x 1⁄2" [12 mm] Barb - Poly Adapters Part Number 8-145-00 8-150-01* 8-205-00 8-145-00 Description 3⁄8" [10mm] NPT-Male x 1⁄2" [12 mm] NPT-Male - Polypro 1⁄2" [12mm] NPT-Female x 3⁄4" [19 mm] GHT (M) - Nylon 1⁄2" [12mm] NPT-Female x 1⁄2" [12 mm] NPT-Male - Aceryl *Fitting available only in nylon – CHECK COMPATIBILITY. 8-150-01 8-205-00 101 Shurflo AG Runner ® The Shurflo AG Runner Transfer Pump System is designed to safely and accurately transfer bulk chemicals to the point of use. Features include: • Industry leading pump • Portable • Can be used with a variety of bulk containers • Built for rugged service with a heavy-duty welded frame • Simple and accurate flow indicator Order Information Part Number Flow Meter Type SF-1100-PTS Pump-mounted (FM-1100) SF-1100-PTSi Inline (FM-1100i) SF-1100-PTSi-00 No Flow Meter SF-1105-PTS Pump-mounted (FM-1100) SF-1105-PTSi Inline (FM-1100i) Description Chemical Transfer Pump with 12 VDC motor, 20 ft. (6 m) cable, alligator clips and in-line fuse (Part # SF-1100 - EPDM valves or SF-1105 - Viton® valves), electronic flow meter, 1-in. NPT x 12 ft. (3.7 m) EPDM discharge hose with ball valve/spout, and 1-in. NPT x 12 ft. (3.7 m) EPDM inlet hose with 1-in. elbow/ ball valve/fitting assembly with locking cam arms See Mini-Bulk Pump (pg. 103) for performance information. Shurflo Mini-Bulk Chemical Transfer System Shurflo Mini-Bulk Chemical Transfer Pumps and Systems are designed specifically for chemical company tanks where the pump is integral to the tank. The SF-1100-REC system is mounted to any tank with a 9-inch, threaded opening. This system allows the pump to recirculate the suspended chemical components prior to transferring to the point of use. Order Information Part Number SF-1100-REC-DT SF-1105-REC* Description Chemical Transfer Pump with 12 VDC motor, 20 ft. (6 m) cable, alligator clips & in-line fuse (Part # SF-1100 - EPDM valves or SF-1105 - Viton® valves), in-line electronic flow meter (Part # FM-1100i), 1-in. NPT x 12 ft. (3.7 m) EPDM discharge hose with ball valve/spout, 3-way valve, tubing and fittings to allow tank recirculation, and 28" ( 71 cm) dip tube. (SF-1100-REC-DT only) See Mini-Bulk Pump (pg. 103) for performance information. * Does not come with 28” dip tube. To order dip tube separately use part number 2407-0002 Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair Ltd. 102 The SF-1100 Series Bulk Chemical Pumps are the industry leader. They are designed for efficiency and power to handle highly viscous fluids. Servicing the SF-1100 series pump is a rare event, but if needed, it can be serviced quickly and easily with only a few hand tools. • Specialized EPDM elastics or Viton® option • 12 volt DC or 110 volt AC motor option • 20 foot (6 m) cord with alligator clips and in-line fuse (DC version), 6 foot (1.8) cord (AC version) • Weather protected on/off switch • Internal bypass to protect the pump at shut-off • 2" MNPT inlet, 1" FNPT outlet • Capable of priming up to 12 feet (3.7 m) • Max Viscosity: 600-880 Centipoise Order Information Part Number Valves Motor SF-1100 EPDM 12 VDC SF-1100-110V EPDM 110 VAC SF-1105 Viton® 12 VDC Model SF-1100 and SF-1105 PSI BAR GPM L/min 0 0.0 10.7 40 Amps 9.3 5 0.3 10.1 38 10.3 10 0.7 8.7 33 12.3 15 1.0 7.6 29 13.9 Shurflo Mini-Bulk Flow Meters The FM-1100 Series Electronic Flow Meter is designed for accurate and easy measuring of transferred chemicals. The FM-1100 Series Flow Meter is an integral component for a complete bulk chemical transfer system. • Max. flow of 20 gpm (76 lpm) (.5% accruacy after calibration) • Max pressure of 120 psi (8.3 bar) • Accurate nutating disk design • Large LCD display makes meter reading easy from a distance • Simple calibration steps and control button layout • Long-life lithium battery • Easy-to-service electronics and batteries • Available in pump-mounted and hose-end configurations • Max Viscosity: 600-880 Centipoise Order Information Part Number Max GPM Max LPM FM-1100 FM-1100i 20 20 76 76 Max PSI 120 120 Max BAR Description 8.3 8.3 Pump-mounted meter kit- 1" MNPT inlet & outlet Inline meter kit -1" FNPT inlet & outlet Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair Ltd. 103 SHURFLO PUMPS Shurflo Mini-Bulk Pumps ® Shurflo Mini-Bulk Kits, Parts, & Accessories ® Part# 94-718-00 Part# 94-720-00 & 94-720-05 Part# 94-719-00 Mini-Bulk Pump Kits for SF-1100 Series Part Number Part# 94-721-00 Description Motor assembly kit used in any SF-1100 series pumps. Kit includes a 12 VDC motor with integrated pump lower housing, built-in on-off switch, 20 foot (6 m) cable, alligator clips and in-line fuse ( Support bracket part # 84-1038-08) Santoprene® diaphragm/lower housing/drive assembly - ready for installation 94-718-00 94-719-00 94-720-00 EPDM valve housing kits include a complete fully-assembled valve housing with o-ring seal* - ready for installation 94-720-05 Viton® valve housing kits include a complete fully-assembled valve housing with o-ring seal* - ready for installation 94-721-00 Polypropylene upper housing - includes o-ring seal* and pump head screws * Manufacturer recommends replacing the O-ring seal whenever the pump has been dismantled. Part# 94-732-00 Part# 94-733-00 Part# 94-735-00 Part# 94-734-00 Part# 94-736-00 Mini-Bulk Flow Meter Kits for FM-1100 Series Part Number Description 94-733-00 Flow meter electronics kit includes the front cover assembly and the electronic display with o-ring and batteries. Kit fits both pump-mounted and in-line meters (O-ring part # 5-040-154) Flow meter housing seal cover kit includes the seal cover, o-ring and screws. Kit fits both pump-mounted and in-line meters. (O-ring part # 5-040-154) 94-734-00 Nutating chamber assembly, including o-ring seal. Kit fits both pump-mounted and in-line meters 94-735-00 90° meter housing with o-ring seal for pump-mounted flow meter. (O-ring part # 5-043-240) 94-736-00 Meter housing with o-ring seal for in-line flow meter. (O-ring part # 5-043-240) 94-732-00 Part# 3320-0064 Part# 8-727-00 Part# 94-724-00 Part# 94-716-00 Part# 94-712-00 Part# 94-725-00 Part# 94-717-00 Part# 94-737-00 Part# 94-723-00 Part# 94-738-00 Other Mini-Bulk Parts & Accessories Part Number Description 3320-0064 Anti-flow back valve for EPA compliance 8-727-00 2 inch FNPT by 1 Inch FNPT polypropylene reducer coupling 94-712-00 2 inch male NPT by 2 inch female NPT street elbow fitting 94-716-00 1 inch NPT ball valve with spout 94-717-00 1 inch NPT x 12 foot EPDM discharge hose kit 94-723-00 Set of red and black alligator clips, including fuse holder 94-724-00 Replacement recirculation lid (Gasket part # 7-155-00) 94-725-00 Replacement recirculation cap 94-737-00 Recirculation system return hose kit - includes return hose and two hose clamps 94-738-00 Elbow, valve and coupling assembly - includes a 1 inch street elbow, 1 inch ball valve, and 1 inch bayonet tank coupling 104 Model 2535S and 2545S HEAD • 100% 316 stainless steel head and two-piece manifold resists washout and corrosion • Stainless steel fasteners provide additional • protection against environmental elements • Heavy-duty, high pressure seals and back-up washers are included to guard against corrosion and continuous duty fatigue • Precision-machined, stainless steel valve and seats provide higher resistance to chemical attack • Self-adjusting, spring-loaded, double V-packings maintain constant high pressure seal compression and extend seal and plunger life • High density ceramic plungers increase the high pressure seal life • Lifetime warranty on the stainless steel head Shown with optional mounting kit (kit P/N 3430-0645) BODY Order Information Model Number Max. GPM Max. PSI 2535S 38 1200 2545S 47 1200 Max. RPM Inlet Port Outlet Port 800 1-1/2” NPT 1” NPT 800 1-1/2” NPT 1” NPT 3430-0645 Base Rail Kit 3430-0699 2535S Mobile Repair Kit (See below for details) U.S. Units 2535S PSI 800 1000 • Oversized crankshaft, bearings and bronze • connecting rod can handle the abuse of cold start-ups and intermittent operation • Forged stainless steel plunger rod stepped between plunger guide and oil seal eliminates seal failure due to plunger rod wear • Heavy-duty oil seals for longer life • 5-year warranty on material & workmanship 2535S 1200 sdfasdfMetric Units BAR 55 69 83 RPM GPM HP GPM HP GPM HP 400 RPM L/m Kw L/m Kw L/m Kw 19.8 11.2 19.7 13.0 19.5 15.2 500 400 75.0 8.4 74.6 9.7 73.8 11.3 24.3 13.1 24.2 15.8 24.1 18.8 600 500 92.0 9.8 91.6 11.8 91.2 14.0 29.2 15.3 29.2 18.8 29.0 22.2 700 600 110.5 11.4 110.5 14.0 109.8 16.6 33.6 18.1 33.5 22.2 33.5 25.8 800 700 127.2 13.5 126.8 16.6 126.8 19.2 38.1 20.0 38.0 25.0 38.0 29.8 800 144.2 14.9 143.8 18.6 143.8 22.2 2545S 2545S PSI 800 1000 1200 BAR 55 69 83 RPM GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw 400 24.4 13.2 24.2 16.0 24.1 18.9 400 92.4 9.8 91.6 11.9 91.2 14.1 500 30.4 16.1 30.3 19.6 30.2 23.1 500 115.1 12.0 114.7 14.6 114.3 17.2 600 36.5 19.2 36.5 23.2 36.4 27.5 600 138.2 14.3 138.2 17.3 137.8 20.5 700 42.1 22.1 42.1 27.1 42.0 32.3 700 159.4 16.5 159.4 20.2 159.0 24.1 800 46.8 25.1 46.8 30.4 46.7 36.1 800 177.2 18.7 177.2 22.7 176.8 26.9 2535S Mobile Repair Kit (Model Number: 3430-0699) • Complete kit to rebuild the wet-end of the 2535S plunger pump • Replace individual parts as needed or the entire wet-end • As parts are used, reorder to keep mobile kit fully stocked • Save time and money by having all the parts at your finger tips in an easy-to-carry case 105 Contains: • 3010-0168 Tool Box • 3430-0640 Valve Kit • 3430-0641 Packing Kit • 3430-0643 Plunger Seal Kit • 3430-0644 Rod Oil Seal Kit • 9910-621010 Bolt to Remove Valves • 2160-0061 Anti-Seize Tube • 3010-0250 Tool for Installing Cups • L-1500 Repair Manual PISTON AND PLUNGER PUMPS Stainless Steel, Triplex Plunger Pumps Forged Brass Head, Triplex Plunger Pumps Series 2400B-P HEAD • Single-piece forged brass heads • Quick and easy pump packing replacement • Precision-machined stainless steel valve and seats provide higher resistance to chemical attack • 100% ceramic plungers • Dual low pressure packing design for improved priming capabilities • Lifetime warranty on single-piece forged brass heads BODY • Hypro’s state-of-the-art, patented cartridge technology allows the crankcase oil seals and all wet-end seals to be easily serviced by removing only the pump head • Hardened stainless steel lower plungers offer superior corrosion and wear resistance • Longer lasting drive system with heavy-duty ball bearings • Bronze piston guides give you larger bearing surface for extended life on oil seals and plungers • 1” OD Solid Shaft • Heavy-duty oil seals • O-ring sealed dipstick • Includes rail mounting kit • 5-year warranty on material & workmanship Order Information - 2410B-P Series Order Information - 2430B-P Series Model Number Max. GPM Max. PSI Max. RPM Inlet Port Outlet Port 2410B-P 4.4 2500 1725 3/4” 1/2” 2430B-P 4.3 3600 1725 3/4” 1/2” 2411B-P 5.3 2500 1725 3/4” 1/2” 2431B-P 5.1 3600 1725 3/4” 1/2” 2412B-P 5.9/4.0 2500 1725/1100 3/4” 1/2” 2432B-P 5.8 3600 1725 3/4” 1/2” 2413B-P 7.2 1800 1725 3/4” 1/2” 2433B-P 7.1 2500 1725 3/4” 1/2” 2414B-P 8.0/4.0 1800 1725/1100 3/4” 1/2” 2434B-P 7.9 2500 1725 3/4” 1/2” PSI RPM 1000 1150 1450 1725 1000 GPM HP 2.7 1.9 3.1 2.1 3.9 2.6 4.6 3.1 2411B-P PSI RPM 1000 1150 1450 1725 1000 GPM HP 3.2 2.4 3.7 2.5 4.6 3.1 5.3 3.7 U.S. Units 1500 GPM HP 2.7 2.7 3.1 3.0 3.9 3.7 4.5 4.4 2000 GPM HP 2.6 3.4 3.0 3.8 3.8 4.8 4.4 5.7 2500 GPM HP 2.6 4.1 3.0 4.6 3.7 5.8 4.4 6.9 1500 GPM HP 3.2 3.3 3.7 3.6 4.6 4.4 5.3 5.2 2000 GPM HP 3.1 4.2 3.6 4.6 4.5 5.7 5.2 6.7 2500 GPM HP 3.1 5.1 3.6 5.6 4.5 7.0 5.1 8.1 1500 GPM HP 3.5 3.6 4.1 4.1 5.1 5.1 5.9 5.9 2000 GPM HP 3.5 4.6 4.0 5.2 5.0 6.6 5.8 7.7 2500 GPM HP 3.5 5.6 4.0 6.4 5.0 8.0 5.7 9.4 2410B-P BAR RPM 1000 1150 1450 1725 1000 GPM HP 3.6 2.7 4.1 2.9 5.1 3.7 5.9 4.2 L/m 10.2 11.7 14.8 17.4 2411B-P BAR RPM 1000 1150 1450 1725 2412B-P PSI RPM 1000 1150 1450 1725 Max. GPM Max. PSI Max. RPM Inlet Port Outlet Port Left-hand shaft extension - add suffix “L” - (i.e. 2430B-LP) Left-hand shaft extension - add suffix “L” - (i.e. 2410B-LP) 2410B-P Model Number L/m 12.1 14.0 17.4 20.1 Metric Units 69 69 Kw 1.4 1.6 1.9 2.3 L/m 10.0 11.5 14.6 17.0 Kw 1.8 1.9 2.3 2.8 L/m 11.9 13.8 17.2 19.9 Kw 2.0 2.2 2.8 3.1 L/m 13.2 15.5 19.3 22.3 103 103 Kw 2.0 2.2 2.8 3.3 L/m 9.8 11.4 14.4 16.7 Kw 2.5 2.6 3.3 3.9 L/m 11.7 13.6 17.0 19.7 Kw 2.7 3.1 3.8 4.4 L/m 13.2 15.1 18.9 22.0 138 138 Kw 2.5 2.8 3.6 4.3 L/m 9.7 11.2 14.0 16.5 Kw 3.1 3.4 4.3 5.0 L/m 11.7 13.4 16.8 19.3 Kw 3.4 3.9 4.9 5.7 L/m 13.2 15.1 18.9 21.6 172 172 Kw 3.1 3.4 4.3 5.1 Kw 3.8 4.2 5.2 6.0 2412B-P BAR RPM 1000 1150 1450 1725 106 L/m 13.6 15.5 19.3 22.3 69 103 138 172 Kw 4.2 4.8 6.0 7.0 PSI RPM 1000 1150 1450 1725 500 GPM 4.4 5.1 6.3 7.2 HP 1.8 1.9 2.5 2.9 1500 GPM HP 4.3 4.2 5.0 4.8 6.1 5.9 7.0 6.8 1800 GPM HP 4.3 5.0 4.9 5.7 6.1 7.0 7.0 8.1 HP 1.9 2.0 2.5 3.0 1000 GPM HP 4.9 3.3 5.6 3.7 6.9 4.6 7.8 5.3 1500 GPM HP 4.9 4.7 5.6 5.3 6.9 6.6 7.7 7.6 1800 GPM HP 4.9 5.5 5.6 6.3 6.8 7.8 7.7 8.8 1000 GPM HP 2.7 1.9 3.1 2.1 3.9 2.6 4.6 3.1 2000 GPM HP 2.6 3.4 3.0 3.8 3.8 4.8 4.4 5.7 3000 GPM HP 2.5 4.8 2.9 5.4 3.6 6.8 4.3 8.1 3600 GPM HP 2.5 5.6 2.8 6.4 3.6 8.0 4.2 9.5 2000 GPM HP 3.1 4.2 3.6 4.6 4.5 5.7 5.2 6.7 3000 GPM HP 3.1 5.9 3.5 6.6 4.4 8.2 5.0 9.5 3600 GPM HP 3.0 6.8 3.5 7.7 4.3 9.8 5.0 11.2 1500 GPM HP 3.5 4.7 4.0 5.3 5.0 6.6 5.8 7.6 3000 GPM HP 3.4 6.9 4.0 7.5 4.9 9.4 5.7 10.9 3600 GPM HP 3.4 7.8 3.9 8.8 4.8 11.0 5.6 12.8 1500 GPM HP 4.3 4.2 5.0 4.8 6.1 5.9 7.0 6.8 2000 GPM HP 4.3 5.5 4.9 6.2 6.1 7.7 7.0 8.9 2500 GPM HP 4.3 6.7 4.9 7.6 6.0 9.4 6.9 10.8 1500 GPM HP 4.9 4.8 5.6 5.4 6.9 6.5 7.8 7.7 2000 GPM HP 4.8 6.2 5.5 7.1 6.8 8.6 7.8 10.0 2500 GPM HP 4.8 7.6 5.5 8.5 6.8 10.5 7.7 12.1 2414B-P PSI RPM 1000 1150 1450 1725 500 GPM 5.0 5.7 7.0 7.9 2430B-P PSI RPM 1000 1150 1450 1725 2431B-P PSI RPM 1000 1150 1450 1725 1000 GPM HP 3.2 2.4 3.7 2.5 4.6 3.1 5.3 3.7 2432B-P PSI RPM 1000 1150 1450 1725 1000 GPM HP 3.6 2.6 4.1 2.9 5.2 3.6 6.0 4.2 2433B-P PSI RPM 1000 1150 1450 1725 1000 GPM HP 4.4 3.0 5.0 3.3 6.2 4.2 7.1 4.9 2434B-P PSI RPM 1000 1150 1450 1725 1000 GPM HP 4.9 3.4 5.6 3.8 7.0 4.5 7.9 5.3 2413B-P U.S. Units 1000 GPM HP 4.4 3.0 5.0 3.3 6.2 4.2 7.1 4.9 BAR RPM 1000 1150 1450 1725 Metric Units L/m 16.7 19.1 23.7 27.1 34 Kw 1.3 1.4 1.8 2.2 L/m 16.7 18.9 23.5 26.9 Kw 1.4 1.5 1.9 2.2 L/m 18.5 21.2 26.1 29.5 Kw 1.4 1.6 1.9 2.3 L/m 9.8 11.4 14.4 16.7 Kw 1.8 1.9 2.3 2.8 L/m 11.7 13.6 17.0 19.7 69 Kw 2.2 2.5 3.1 3.7 L/m 16.3 18.9 23.1 26.5 Kw 2.5 2.8 3.4 4.0 L/m 18.5 21.2 26.1 29.1 Kw 2.5 2.8 3.6 4.3 L/m 9.5 11.0 13.6 16.3 Kw 3.1 3.4 4.3 5.0 L/m 11.7 13.2 16.7 18.9 103 Kw 3.1 3.6 4.4 5.1 L/m 16.4 18.7 23.2 26.6 Kw 3.5 4.0 4.9 5.7 L/m 18.5 21.2 25.7 29.1 Kw 3.6 4.0 5.1 6.0 L/m 9.5 10.6 13.6 15.9 Kw 4.4 4.9 6.1 7.1 L/m 11.4 13.2 16.3 18.9 124 Kw 3.7 4.2 5.2 6.1 2414B-P BAR RPM 1000 1150 1450 1725 L/m 18.9 21.6 26.5 29.9 2430B-P BAR RPM 1000 1150 1450 1725 L/m 10.2 11.7 14.8 17.4 2431B-P BAR RPM 1000 1150 1450 1725 L/m 12.1 14.0 17.4 20.1 34 69 69 69 138 138 103 207 207 124 248 248 Kw 4.1 4.7 5.8 6.6 Kw 4.2 4.8 6.0 7.1 Kw 5.1 5.7 7.3 8.4 2432B-P BAR RPM 1000 1150 1450 1725 L/m 13.6 15.5 19.7 22.7 69 Kw 1.9 2.2 2.7 3.1 L/m 13.2 15.1 18.9 22.0 Kw 2.2 2.5 3.1 3.7 L/m 16.3 18.9 23.1 26.5 Kw 2.5 2.8 3.4 4.0 L/m 18.5 21.2 26.1 29.5 138 Kw 3.5 4.0 4.9 5.7 L/m 12.9 15.1 18.5 21.6 Kw 3.1 3.6 4.4 5.1 L/m 16.3 18.5 23.1 26.5 Kw 3.6 4.0 4.8 5.7 L/m 18.2 20.8 25.7 29.5 207 Kw 5.1 5.6 7.0 8.1 L/m 12.9 14.8 18.2 21.2 Kw 4.1 4.6 5.7 6.6 L/m 16.3 18.5 22.7 26.1 Kw 4.6 5.3 6.4 7.5 L/m 18.2 20.8 25.7 29.1 248 Kw 5.8 6.6 8.2 9.5 2433B-P BAR RPM 1000 1150 1450 1725 L/m 16.7 18.9 23.5 26.9 2434B-P BAR RPM 1000 1150 1450 1725 107 L/m 18.5 21.2 26.5 29.9 69 69 103 103 138 138 172 172 Kw 5.0 5.7 7.0 8.1 Kw 5.7 6.3 7.8 9.0 PISTON AND PLUNGER PUMPS 2413B-P Forged Brass Head, Triplex Plunger Pumps Series 2300B-P HEAD • Single-piece forged brass heads • Quick and easy pump packing replacement • Precision-machined stainless steel valve and seats provide higher resistance to chemical attack • 100% ceramic plungers • Dual low pressure packing design for improved priming capabilities • Lifetime warranty on single-piece forged brass heads BODY • Hypro’s state-of-the-art, patented cartridge technology allows the crankcase oil seals and all wet-end seals to be easily serviced by removing only the pump head • Hardened stainless steel lower plungers offer superior corrosion and wear resistance • Shafts Output: • ¾” OD Solid Shaft – 2303B-P, 2304B-P, 2314B-P, 2330B-P, 2351B-P & 2345B-P • ¾” OD Solid Shaft with M6 x 1” Tapped Thread for clutch installation – 2359B-P & 2340B-P • ¾” OD Solid Shaft with 6” electric clutch assembly – 2359B-PY • ¾” ID Hollow Shaft Flanged for direct couple to gasoline engines – 2354B-CP & 2331B-CP • Heavy-duty oil seals • O-ring sealed dipstick • Includes rail mounting kit • 5-year warranty on material & workmanship Order Information - 2330B-P, 2359B-P, 2351B-P, 2340B-P, 2354B-P Order Information - 2303-P, 2304B-P, 2314B-P Model Number Max. GPM Max. PSI Max. RPM Inlet Port Outlet Port 3/8” 2330B-P 3.1 2500 1725 1/2” 3/8” 2359B-P* 3.5 3000 1725 1/2” 3/8” Model Number Max. GPM Max. PSI Max. RPM Inlet Port Outlet Port 2303B-P 3.1 1200 1725 1/2” 2304B-P 4.2 1200 1725 1/2” 3/8” 2314B-P 4.0/3.0 1200 1450/1100 1/2” 3/8” Left-hand shaft extension - add suffix “L” - (i.e. 2303B-LP) 2351B-P 4.0 3000 1725 1/2” 3/8” 2340B-P* 4.2 2500 1725 1/2” 3/8” 2345B-P 4.8 2500 1725 1/2” 3/8” Left-hand shaft extension - add suffix “L” - (i.e. 2330B-LP) *With m6 x 1" threaded shaft for Clutch installation Order Information - 2354B-CP, 2331B-CP Model Number Max. GPM Max. PSI Max. RPM Inlet Port Outlet Port 2354B-CP 2.7 2000 3450 1/2” 3/8” 2331B-CP 3.0 1500 3450 1/2” 3/8” Order Information - 2359B-PY U.S. Units 2303B-P, 2304B-P, 2314B-P RPM 1100 1450* 500 GPM 3.1 4.1 700 HP GPM 1.3 1.5 3.1 4.0 1000 HP 1.6 2.0 Max. GPM Max. PSI Max. RPM Inlet Port Outlet Port 2359B-PY 3.5 3000 1725 1/2” 3/8” Left-hand shaft extension - add suffix “L” - (i.e. 2359B-LPY) Left-hand shaft extension - add suffix “L” - (i.e. 2354B-CLP) PSI Model Number GPM 3.1 4.0 HP 2.1 2.7 GPM 3.1 4.0 Metric Units 2303B-P, 2304B-P, 2314B-P BAR 1200 RPM 34 48 69 83 L/m Kw L/m Kw L/m Kw L/m Kw 2.4 1100 11.7 1.0 11.7 1.2 11.7 1.6 11.7 1.8 3.2 1450* 15.5 1.1 15.1 1.5 15.1 2.0 15.1 2.4 1725** 11.7 0.9 11.7 1.3 11.7 1.6 11.7 1.9 1725*** 16.3 1.2 16.3 1.5 15.9 2.2 15.9 2.5 HP 1725** 3.1 1.2 3.1 1.7 3.1 2.2 3.1 2.6 1725*** 4.3 1.6 4.3 2.0 4.2 2.9 4.2 3.4 * 2314 only, ** 2303 only, *** 2304 only * 2314 only, ** 2303 only, *** 2304 only 108 PSI 2330B-P U.S. Units 500 700 1000 1300 1500 2000 BAR Metric Units 34 48 69 90 103 172 RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw 1000 1.8 1000 6.8 0.7 1.8 1.0 1.8 1.3 1.8 1.6 1.8 1.9 1.8 2.9 0.5 6.8 0.7 6.8 1.0 6.8 1.2 6.8 1.4 6.8 2.2 9.8 1.4 9.8 1.7 9.8 2.0 9.5 3.1 1450 2.7 1.0 2.7 1.4 2.6 1.9 2.6 2.3 2.6 2.7 2.5 4.2 1450 10.2 0.7 10.2 1.0 1600 2.9 1.1 2.9 1.5 2.9 2.0 2.9 2.5 2.8 2.8 2.8 4.6 1600 11.0 0.8 11.0 1.1 11.0 1.5 11.0 1.9 10.6 2.1 10.6 3.4 1725 3.1 1.2 3.1 1.7 3.1 2.2 3.1 2.8 3.1 3.2 3.0 5.0 1725 11.7 0.9 11.7 1.3 11.7 1.6 11.7 2.1 11.7 2.4 11.4 3.7 2340B-P 2340B-P PSI 500 700 1000 1300 1500 2000 BAR 34 48 69 90 103 172 RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw 1000 2.5 1000 9.5 1.0 2.5 1.3 2.5 1.8 2.5 2.2 2.5 2.5 2.4 4.0 0.7 9.5 1.0 9.5 1.3 9.5 1.6 9.5 1.9 9.1 3.0 1450 3.6 1.3 3.6 1.8 3.6 2.4 3.6 3.1 3.5 3.6 3.5 5.6 1450 13.6 1.0 13.6 1.3 13.6 1.8 13.6 2.3 13.2 2.7 13.2 4.2 1600 4.0 1.5 4.0 1.9 3.9 2.7 3.9 3.3 3.9 3.8 3.8 6.2 1600 15.1 1.1 15.1 1.4 14.8 2.0 14.8 2.5 14.8 2.8 14.4 4.6 1725 4.3 1.6 4.3 2.0 4.2 2.9 4.2 3.6 4.2 4.1 4.1 6.6 1725 16.3 1.2 16.3 1.5 15.9 2.2 15.9 2.7 15.9 3.1 15.5 4.9 2345B-P 2345B-P PSI 500 700 1000 1300 1500 2000 BAR RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP 34 48 69 90 103 172 RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw 1000 2.8 1.2 2.8 1.5 2.8 2.0 2.8 2.5 2.8 2.8 2.7 4.5 1000 10.6 0.9 10.6 1.1 10.6 1.5 10.6 1.9 10.6 2.1 10.2 3.4 1450 4.1 1.7 4.1 2.2 4.0 2.9 4.0 3.7 4.0 4.1 4.0 6.5 1450 15.5 1.3 15.5 1.6 15.1 2.2 15.1 2.8 15.1 3.1 15.1 4.8 1600 4.5 1.8 4.4 2.4 4.4 3.2 4.4 4.1 4.4 4.6 4.3 7.2 1600 17.0 1.3 16.7 1.8 16.7 2.4 16.7 3.1 16.7 3.4 16.3 5.4 1725 4.8 2.0 4.7 2.6 4.7 3.4 4.7 4.4 4.7 4.9 4.6 7.6 1725 18.2 1.5 17.8 1.9 17.8 2.5 17.8 3.3 17.8 3.7 17.4 5.7 2359B-P, 2359B-PY PSI 500 700 1000 1300 2000 2359B-P, 2359B-PY 3000 BAR RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP 34 48 69 90 138 207 RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw 1000 2.1 1.0 2.1 1.6 2.1 2.0 2.1 2.3 2.0 2.8 2.0 4.0 1000 7.9 1450 3.0 1.4 3.0 2.3 3.0 2.8 2.9 3.2 2.9 4.1 2.9 5.6 1450 11.4 1.0 11.4 1.7 11.4 2.1 11.0 2.4 11.0 3.1 11.0 4.2 0.7 7.9 1.2 7.9 1.5 7.9 1.7 7.6 2.1 7.6 3.0 1600 3.3 1.6 3.3 2.6 3.3 3.2 3.3 3.4 3.2 4.4 3.2 6.2 1600 12.5 1.2 12.5 1.9 12.5 2.4 12.5 2.5 12.1 3.3 12.1 4.6 1725 3.6 1.6 3.6 2.7 3.5 3.3 3.5 3.8 3.5 4.8 3.4 6.8 1725 13.6 1.2 13.6 2.0 13.2 2.5 13.2 2.8 13.2 3.6 12.9 5.1 2351B-P PSI 2351B-P 500 700 1000 1300 2000 3000 BAR RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP 34 48 69 90 138 207 RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw 1000 2.4 0.9 2.3 1.7 2.3 2.1 2.3 2.4 2.3 3.1 2.3 4.3 1000 9.1 1450 3.4 1.4 3.4 2.4 3.4 3.0 3.3 3.4 3.3 4.4 3.2 6.3 1450 12.9 1.0 12.9 1.8 12.9 2.2 12.5 2.5 12.5 3.3 12.1 4.7 0.7 8.7 1.3 8.7 1.6 8.7 1.8 8.7 2.3 8.7 3.2 1600 3.8 1.6 3.7 2.7 3.7 3.3 3.7 3.7 3.6 4.8 3.6 7.0 1600 14.4 1.2 14.0 2.0 14.0 2.5 14.0 2.8 13.6 3.6 13.6 5.2 1725 4.0 1.7 4.0 2.9 4.0 3.5 4.0 4.0 3.9 5.1 3.8 7.4 1725 15.1 1.3 15.1 2.2 15.1 2.6 15.1 3.0 14.8 3.8 14.4 5.5 2331B-CP PSI 500 2331B-CP 700 1000 1300 1500 BAR RPM GPM HP GPM HP GPM HP GPM HP GPM HP 34 48 69 90 103 RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw 1800 1.9 1.0 1.9 1.2 1.8 1.5 1.8 1.8 1.8 2.1 1800 7.2 0.7 7.2 0.9 6.8 1.1 6.8 1.3 6.8 1.6 2600 2.7 1.4 2.6 1.7 2.6 2.2 2.6 2.7 2.5 3.0 2600 10.2 1.0 9.8 1.3 9.8 1.6 9.8 2.0 9.5 2.2 2875 2.9 1.5 2.9 1.9 2.8 2.4 2.8 2.8 2.8 3.2 2875 11.0 1.1 11.0 1.4 10.6 1.8 10.6 2.1 10.6 2.4 3450 3.4 1.9 3.4 2.2 3.3 2.8 3.3 3.4 3.3 3.8 3450 12.9 1.4 12.9 1.6 12.5 2.1 12.5 2.5 12.5 2.8 2354B-CP PSI 500 2354B-CP 1000 1500 2000 BAR RPM GPM HP GPM HP GPM HP GPM HP 34 69 90 103 RPM L/m Kw L/m Kw L/m Kw L/m Kw 2800 2.4 1.3 2.3 2.0 2.3 2.7 2.2 3.4 2800 9.1 1.0 8.7 1.5 8.7 2.0 8.3 2.5 3000 2.6 1.4 2.5 2.2 2.4 2.9 2.3 3.7 3000 9.8 1.0 9.5 1.6 9.1 2.2 8.7 2.8 9.8 1.8 9.8 3200 2.7 1.6 2.6 2.4 2.6 3.2 2.5 3.9 3200 10.2 1.2 2.4 9.5 2.9 3400 2.9 1.6 2.8 2.4 2.7 3.3 2.6 4.0 3400 11.0 1.2 10.6 1.8 10.2 2.5 9.8 3.0 109 PISTON AND PLUNGER PUMPS 2330B-P Forged Brass Head, Duplex Plunger Pumps Series 2200B-P HEAD • Single-piece forged brass heads • Quick and easy pump packing replacement • Precision-machined stainless steel valve and seats provide higher resistance to chemical attack • 100% ceramic plungers • Dual low pressure packing design for improved priming capabilities • Lifetime warranty on single-piece forged brass heads BODY • Hypro’s state-of-the-art, patented cartridge technology allows the crankcase oil seals and all wet-end seals to be easily serviced by removing only the pump head • Hardened stainless steel lower plungers offer superior corrosion and wear resistance • Shafts Output: • ¾” OD Solid Shaft – 2220B-P, 2221B-P, 2230B-P, 2231B-P • 5/8” ID Hollow Shaft with Torque Arm – 2220B-HP, 2221B-HP, 2230B-HP, 2231B-HP • 5/8” ID Hollow Shaft for direct couple to electric motors (NEMA 56C) – 2220B-AP, 2221B-AP, 2230B-AP, 2231B-AP • ¾” ID Hollow Shaft Flanged for direct couple to gasoline engines – 2231B-CP • Heavy-duty oil seals • O-ring sealed dipstick • Includes rail mounting kit • 5-year warranty on material & workmanship Order Information 2220B-P, 2221B-P, 2230B-P, 2231B-P Order Information 2220B-HP, 2221B-HP, 2230B-HP, 2231B-HP Model Number Max. GPM Max. PSI Max. RPM Inlet Port Outlet Port Model Number Max. GPM Max. PSI Max. RPM Inlet Port Outlet Port 2220B-P 2.1 2000 1725 1/2” 3/8” 2220B-HP 2.1 2000 1725 1/2” 3/8” 2221B-P 2.1 1500 3450 1/2” 3/8” 2221B-HP 2.1 1500 3450 1/2” 3/8” 2230B-P 3.0 2000 1725 1/2” 3/8” 2230B-HP 3.0 2000 1725 1/2” 3/8” 2231B-P 3.0 1500 3450 1/2” 3/8” 2231B-HP 3.0 1500 3450 1/2” 3/8” Left-hand shaft extension - add suffix “L” - (i.e. 2220B-LP) Left-hand shaft extension - add suffix “L” - (i.e. 2220B-HLP) Order Information 2220B-AP, 2221B-AP, 2230B-AP,2231B-AP Order Information 2231B-CP Model Number Max. GPM Max. PSI Max. RPM Inlet Port Outlet Port 2220B-AP 2.1 2000 1725 1/2” 3/8” 2221B-AP 2.1 1500 3450 1/2” 3/8” 2230B-AP 3.0 2000 1725 1/2” 3/8” 2231B-AP 3.0 1500 3450 1/2” 3/8” Model Number Max. GPM Max. PSI Max. RPM Inlet Port Outlet Port 2231B-CP 3.0 1500 3450 1/2” 3/8” Left-hand shaft extension - add suffix “L” - (i.e. 2231-CLP) Left-hand shaft extension - add suffix “L” - (i.e. 2220B-ALP) 110 PSI 500 700 1000 1300 1500 Metric Units 2220B-P, 2220B-AP, 2220B-HP BAR 2000 34 48 69 90 103 138 RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw 1000 1.2 0.5 1.2 0.7 1.2 0.9 1.2 1.1 1.2 1.2 1.2 1.6 1000 4.5 0.4 4.5 0.5 4.5 0.7 4.5 0.8 4.5 0.9 4.5 1.2 1450 1.7 0.8 1.7 1.0 1.7 1.4 1.7 1.6 1.7 1.8 1.7 2.3 1450 6.4 0.6 6.4 0.7 6.4 1.0 6.4 1.2 6.4 1.3 6.4 1.7 1600 1.9 0.9 1.9 1.1 1.9 1.5 1.9 1.8 1.9 2.1 1.9 2.7 1600 7.2 0.7 7.2 0.8 7.2 1.1 7.2 1.3 7.2 1.6 7.2 2.0 1725 2.1 0.8 2.1 1.1 2.1 1.5 2.0 1.9 2.0 2.1 2.0 2.9 1725 7.9 0.6 7.9 0.8 7.9 1.1 7.6 1.4 7.6 1.6 7.6 2.2 2221B-P, 2221B-AP, 2221B-HP PSI 500 700 1000 1300 2221B-P, 2221B-AP, 2221B-HP 1500 BAR 34 48 69 90 103 RPM GPM HP GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw 1800 1.2 1800 4.5 0.8 1.2 0.9 1.1 1.1 1.1 1.3 1.1 1.5 0.6 4.5 0.7 4.2 0.8 4.2 1.0 4.2 1.1 2600 1.7 1.1 1.7 1.4 1.6 1.5 1.6 1.9 1.6 2.2 2600 6.4 0.8 6.4 1.0 6.1 1.1 6.1 1.4 6.1 1.6 2875 1.8 1.3 1.8 1.5 1.8 1.8 1.8 2.3 1.7 2.5 2875 6.8 1.0 6.8 1.1 6.8 1.3 6.8 1.7 6.4 1.9 3450 2.1 1.6 2.1 1.9 2.1 2.1 2.1 2.6 2.0 2.9 3450 7.9 1.2 7.9 1.4 7.9 1.6 7.9 1.9 7.6 2.2 2230B-P, 2230B-AP, 2230B-HP PSI 500 700 1000 2230B-P, 2230B-AP, 2230B-HP 1300 1500 2000 BAR RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP 34 48 69 90 103 138 RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw 1000 1.9 0.8 1.9 1.0 1.9 1.3 1.8 1.7 1.8 1.9 1.8 2.4 1000 7.2 1450 2.7 1.1 2.7 1.4 2.7 2.0 2.7 2.4 2.7 2.8 2.7 3.6 1450 10.2 0.8 10.2 1.0 10.2 1.5 10.2 1.8 10.2 2.1 10.2 2.7 0.6 7.2 0.7 7.2 1.0 6.8 1.3 6.8 1.4 6.8 1.8 1600 3.0 1.2 3.0 1.6 3.0 2.3 3.0 2.8 2.9 3.1 2.9 4.1 1600 11.4 0.9 11.4 1.2 11.4 1.7 11.4 2.1 11.0 2.3 11.0 3.1 1725 3.2 1.4 3.2 1.9 3.2 2.4 3.1 3.0 3.1 3.4 3.1 4.4 1725 12.1 1.0 12.1 1.4 12.1 1.8 11.7 2.2 11.7 2.5 11.7 3.3 2231B-P, 2231B-AP, 2231B-HP, 2231B-CP PSI 500 700 1000 1300 2231B-P, 2231B-AP, 2231B-HP, 2231B-CP 1500 BAR RPM GPM HP GPM HP GPM HP GPM HP GPM HP 34 48 69 90 103 RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw 1800 1.8 0.8 1.8 1.0 1.8 1.4 1.7 1.7 1.7 1.9 1800 6.8 0.6 6.8 0.7 6.8 1.0 6.4 1.3 6.4 1.4 2600 2.5 1.2 2.5 1.5 2.5 2.0 2.5 2.4 2.5 2.7 2600 9.5 0.9 9.5 1.1 9.5 1.5 9.5 1.8 9.5 2.0 2875 2.8 1.2 2.8 1.6 2.7 2.1 2.7 2.7 2.7 2.9 2875 10.6 0.9 10.6 1.2 10.2 1.6 10.2 2.0 10.2 2.2 3450 3.2 1.5 3.2 1.9 3.2 2.5 3.2 3.2 3.1 3.5 3450 12.1 1.1 12.1 1.4 12.1 1.9 12.1 2.4 11.7 2.6 111 PISTON AND PLUNGER PUMPS U.S. Units 2220B-P, 2220B-AP, 2220B-HP Big Twin Models 5206C and 5206C-H • Port sizes: 3⁄4" inlet, 3⁄4" outlet • Max. fluid temperature: 140°F/60°C • Pump shaft rotation: bi-rotational • Cups: Leather standard [fabric-reinforced (F) and Buna-N (R) available] • Recommended to be used with Pulsation Dampener 3375-0017-2 • Weight: 18 lbs./8.2 kg Order Information Model Number 5206C 5206C-H 3430-0037 Max GPM 8 8 Max LPM 30.3 30.3 Max PSI 400 400 Max Max Shaft Output BAR RPM 27.6 800 1" solid shaft w/base 27.6 800 1-3⁄8" hollow shaft w/base Leather cup kit Fabric Cups - Add Suffix “F” - (ie.: 5206C-F). Buna-N Cups - Add Suffix “R” - (ie.: 5206C-R). Pressure in PSI and BAR 25 PSI 1.7 BAR 100 PSI 6.9 BAR 200 PSI 13.8 BAR 300 PSI 20.9 BAR 400 PSI 27.6 BAR GPM HP LPM HP @400 RPM 3.9 .26 14.8 .26 3.9 .40 14.8 .40 4.0 .66 15.1 .66 3.9 .89 14.8 .89 3.9 1.1 14.8 1.1 GPM HP LPM HP @500 RPM 4.9 .29 18.5 .29 5.0 .46 189 .46 5.0 .75 18.9 .75 5.0 1.1 18.9 1.1 4.9 1.4 18.5 1.4 GPM HP LPM HP @540 RPM 5.4 .31 20.4 .31 5.4 .50 20.4 .50 5.4 .81 20.4 .81 5.3 1.2 20.1 1.2 5.3 1.5 20.1 1.5 GPM HP LPM HP @600 RPM 6.0 .34 22.7 .34 6.0 .56 22.7 .56 6.0 .90 22.7 .90 5.9 1.3 22.3 1.3 5.9 1.6 22.3 1.6 GPM HP LPM HP @700 RPM 7.0 .40 26.5 .40 7.0 .65 26.5 .65 6.9 1.1 26.1 1.1 6.9 1.5 26.1 1.5 6.9 1.9 26.1 1.9 GPM HP LPM HP @800 RPM 8.0 .46 30.3 .46 7.9 .74 29.9 .74 7.8 1.2 29.5 1.2 7.7 1.7 29.1 1.7 7.7 2.2 29.1 2.2 Big Twin Models 5210C and 5210C-H • Port sizes: 3⁄4" inlet, 3⁄4" outlet • Max. fluid temperature: 140°F/60°C • Pump shaft rotation: bi-rotational • Cups: Leather standard [fabric-reinforced (F) and Buna-N (R) available] • Recommended to be used with Pulsation Dampener 3375-0015-2 • Weight: 18 lbs./8.2 kg Pressure in PSI and BAR Order Information Model Number 5210C 5210C-H 3430-0037 Max GPM 10 10 Max LPM 37.5 37.5 Max PSI 400 400 Max Max Shaft Output BAR RPM 27.6 600 1" solid shaft w/base 27.6 600 1-3⁄8" hollow shaft w/base Leather cup kit 25 PSI 1.7 BAR 100 PSI 6.9 BAR 200 PSI 13.8 BAR 300 PSI 20.7 BAR 400 PSI 27.6 BAR Fabric Cups - Add Suffix “F” - (ie.: 5210C-F). Buna-N Cups - Add Suffix “R” - (ie.: 5210C-R). 112 GPM HP LPM HP @400 RPM 7.3 .39 27.6 .39 7.3 .69 27.6 .69 7.2 1.2 27.2 1.2 7.2 1.7 27.2 1.7 7.2 2.1 27.2 2.1 GPM HP LPM HP @500 RPM 8.9 .57 33.7 .57 8.9 .87 33.7 .87 8.8 1.5 33.3 1.5 8.8 2.0 33.3 2.0 8.7 2.6 32.9 2.6 GPM HP LPM HP @540 RPM 9.4 .66 35.6 .66 9.4 .94 35.6 .94 9.3 1.6 35.2 1.6 9.3 2.2 35.2 2.2 9.2 2.7 34.8 2.7 GPM HP LPM HP @600 RPM 10.0 .73 37.9 .73 9.9 1.10 37.5 1.10 9.9 1.7 37.5 1.7 9.8 2.3 37.1 2.3 9.8 3.0 37.1 3.0 Series 5315, 5320, 5325 and 5330 • Port sizes: 1⁄2" inlet, 1⁄2" outlet • Max. fluid temperature: 140°F/60°C • Pump shaft rotation: bi-rotational • Cups: Leather (-X) standard for 5300 Series [Buna-N (-RX), Teflon (-CX) available] • Models require a pulsation dampener (such as a 3375-0012 pulse hose) on the discharge side • Injector head available (sold separately part number 3396-0014) • Weight: 10 lbs./4.5 kg Order Information Model Number 5315C-X 5320C-X 5325C-X 5330C-X 5315C-HX 5320C-HX 5325C-HX 5330C-HX Max GPM 1.5 2.2 2.5 3 1.5 2.2 2.5 3 Max LPM 5.7 8.3 9.5 11.4 5.7 8.3 9.5 11.4 Max PSI 500 500 500 500 500 500 500 500 Max BAR 34.5 34.5 34.5 34.5 34.5 34.5 34.5 34.5 Max RPM 1800 1800 1800 1800 1800 1800 1800 1800 Shaft Output 5⁄8" OD solid shaft 5⁄8" OD solid shaft 5⁄8" OD solid shaft 5⁄8" OD solid shaft 5⁄8" ID hollow shaft 5⁄8" ID hollow shaft 5⁄8" ID hollow shaft 5⁄8" ID hollow shaft Buna-N - add suffix "R" - ( i.e :5320C-RX) Teflon - add suffix "C" - ( i.e :5320C-CX) Small Twin Models 5324C and 5324C-H Model Pressure in PSI and BAR 50 PSI 3.4 BAR 100 PSI 6.9 BAR 200 PSI 13.8 BAR 300 PSI 20.7 BAR 400 PSI 27.6 BAR 500 PSI 34.5 BAR 5315 GPM HP LPM HP @1725 RPM 1.56 .12 5.9 .12 1.52 .15 5.8 .15 1.50 .28 5.7 .28 1.47 .35 5.6 .35 1.45 .43 5.5 .43 1.44 .56 5.5 .56 5320 GPM HP LPM HP @1725 RPM 2.22 .21 8.4 .21 2.18 .28 8.3 .28 2.16 .43 8.2 .43 2.12 .57 8.0 .57 2.11 .71 8.0 .71 2.10 .83 7.9 .83 5325 GPM HP LPM HP @1725 RPM 2.56 .25 9.7 .25 2.54 .37 9.6 .37 2.52 .52 9.3 .52 2.50 .68 9.5 .68 2.10 .82 7.9 .82 2.44 .96 9.9 .96 5330 GPM HP LPM HP @1725 RPM 3.02 .37 11.4 .37 3.01 .49 11.4 .49 3.00 .74 11.4 .74 2.98 .92 11.3 .92 2.96 1.11 11.2 1.11 2.94 1.23 11.1 1.23 • Port sizes: 1⁄2" inlet, 1⁄2" outlet • Max. fluid temperature: 140°F/60°C • Pump shaft rotation: bi-rotational • Cups: Buna-N standard • Model 5324 requires a pulsation dampener (such as a 3375-0012 pulse hose) on the discharge side • Injector head available 3396-0006 • Weight: 11 lbs./5 kg Order Information Model Number 5324C 5324C-H Max GPM 2.9 2.9 Max LPM 11.0 11.0 Max PSI 800 800 Max BAR 55.2 55.2 Max RPM 1800 1800 Shaft Output 5⁄8" OD solid shaft 5⁄8" ID hollow shaft Pressure in PSI and BAR 100 PSI 6.9 BAR 200 PSI 13.8 BAR 300 PSI 20.7 BAR 400 PSI 27.6 BAR 500 PSI 34.5 BAR 600 PSI 41.4 BAR 700 PSI 48.3 BAR 800 PSI 55.2 BAR 113 GPM HP LPM HP @600 RPM .96 .12 3.6 .12 .94 .19 3.6 .19 .94 .26 3.6 .26 .95 .33 3.6 .33 .94 .39 3.6 .39 .93 .45 3.5 .45 .93 .52 3.5 .52 .93 .58 3.5 .58 GPM HP LPM HP @900 RPM 1.51 .19 5.7 .19 1.49 .30 5.6 .30 1.48 .41 5.6 .41 1.47 .50 5.6 .50 1.47 .60 5.6 .60 1.46 .69 5.5 .69 1.46 .78 5.5 .78 1.45 .87 5.5 .87 GPM HP LPM HP @1200 RPM 2.00 .28 7.6 .28 1.98 .41 7.5 .41 1.97 .55 7.5 .55 1.96 .67 7.4 .67 1.96 .81 7.4 .81 1.95 .93 7.4 .93 1.94 1.06 7.3 1.06 1.93 1.16 7.3 1.16 GPM HP LPM HP @1450 RPM 2.42 .34 9.2 .34 2.40 .50 9.1 .50 2.38 .67 9.0 .67 2.37 .83 9.0 .83 2.36 .97 8.9 .97 2.35 1.13 8.9 1.13 2.33 1.27 8.8 1.27 2.32 1.42 8.8 1.42 GPM HP LPM HP @1725 RPM 2.90 .40 11.0 .40 2.89 .59 10.9 .59 2.87 .80 10.9 .80 2.85 1.00 10.8 1.00 2.83 1.19 10.7 1.19 2.81 1.38 10.6 1.38 2.80 1.54 10.6 1.54 2.79 1.69 10.6 1.69 PISTON AND PUMPS PLUNGER PUMPS Small Twin Small Twin Models 5321C, 5322C, 5321C-H and 5322C-H • Port sizes: 1⁄2" inlet, 1⁄2" outlet • Max. fluid temperature: 180°F/82°C • Pump shaft rotation: bi-rotational • Injector head available 3396-0006 • Models 5321 and 5322 require a pulsation dampener (such as a 3375-0012 pulse hose) on the discharge side • Weight: 11 lbs./5 kg Order Information Model Number 5321C 5322C 5321C-H 5322C-H Max Max Max Max Max Shaft Output GPM LPM PSI BAR RPM 2.2 8.3 1000 68.9 1800 5⁄8" OD solid shaft 2.2 8.3 1000 68.9 1800 5⁄8" OD solid shaft 2.2 8.3 1000 68.9 1800 5⁄8" ID hollow shaft 2.2 8.3 1000 68.9 1800 5⁄8" ID hollow shaft Plunger Material Stainless Steel Ceramic Stainless Steel Ceramic Pressure in PSI and BAR 100 PSI 6.9 BAR 300 PSI 20.7 BAR 500 PSI 34.5 BAR 700 PSI 48.3 BAR 1000 PSI 69.0 BAR GPM HP LPM HP @900 RPM 1.1 0.2 4.2 0.2 1.1 .4 4.2 .4 1.1 .5 4.2 .5 1.1 .6 4.2 .6 1.1 .8 4.2 .8 GPM HP LPM HP @1200 RPM 1.5 .3 5.7 .3 1.5 .5 5.7 .5 1.5 .6 5.7 .6 1.5 .8 5.7 .8 1.4 1.0 5.3 1.0 GPM HP LPM HP @1450 RPM 1.8 .4 6.8 .4 1.8 .6 6.8 .6 1.8 .7 6.8 .7 1.8 .9 6.8 .9 1.8 1.2 6.8 1.2 GPM HP LPM HP @1725 RPM 2.2 .4 8.3 .4 2.1 .7 7.9 .7 2.1 .8 7.9 .8 2.1 1.1 7.9 1.1 2.1 1.4 7.9 1.4 Small Twin Model 53702 • Port sizes: 1⁄2" inlet, 1⁄2" outlet • Max. fluid temperature: 180°F/82°C • Pump shaft rotation: bi-rotational • Plungers: polished ceramic • Model 53702 requires a pulsation dampener (such as a 3375-0012 pulse hose) on the discharge side • Inlet requirements: pressure feed 20-100 psi (1.4-6.9 bar) • Weight: 11 lbs./5 kg Order Information Model Number 53702 Max GPM 2.2 Max LPM 8.3 Max PSI 1000 Max BAR 68.9 Max RPM 3450 Shaft Output 5⁄8" ID hollow shaft 114 Pressure in PSI and BAR GPM LPM 100 PSI 6.9 BAR 300 PSI 20.7 BAR 500 PSI 34.5 BAR 700 PSI 48.3 BAR 1000 PSI 69 BAR 2.3 8.7 2.2 8.3 2.1 8.0 2.1 8.0 2.0 7.6 @3450 RPM HP HP .4 .4 .7 .7 .9 .9 1.2 1.2 1.5 1.5 Model 53703 • Max. fluid temperature: 180°F/82°C • Port sizes: 1⁄2" inlet, 1⁄2" outlet • Pump shaft rotation: bi-rotational • Plungers: polished ceramic • Model 53703 requires a pulsation dampener (such as a 3375-0012 pulse hose) on the discharge side • Inlet requirements: pressure feed 20-100 psi (1.3 - 6.9 bar) • Weight: 11 lbs./5 kg Order Information Model Number 53703 Max GPM 2.3 Max LPM 8.7 Max PSI 1000 Max BAR 68.9 Max RPM 3100 Shaft Output 5⁄8" ID hollow shaft Requires a Special Order Gas Engine With 5⁄8” Shaft Pressure in PSI and BAR GPM LPM 100 PSI 6.9 BAR 300 PSI 20.7 BAR 500 PSI 34.5 BAR 700 PSI 48.3 BAR 1000 PSI 69.0 BAR 2.3 8.7 2.2 8.3 2.1 7.9 2.1 7.9 2.0 7.6 @3100 RPM HP HP 0.4 0.4 .7 .7 .9 .9 1.2 1.2 1.5 1.5 Hydraulically-Driven Pressure Washers Offering 3-4 gpm (11-15 lpm) Cleaning Power • Anodized, die-cast aluminum crankcase • Heavy-duty, corrosion-resistant brass manifold • One-piece, forged-bronze connecting rods • Stainless steel valves • Hardened, stainless steel piston guides • Solid ceramic plungers • High pressure and low pressure packings of high-quality buna textile • Heavy-duty, ball bearing supported crankshaft • Sight glass and oil-level dipstick • Hydraulic ports: 1⁄2" NPT inlet, 3⁄4" NPT outlet The hydraulically-driven pressure washers are ideally suited for remote and explosion-proof environments where electricity cannot be used. These models are equipped with a hydraulic motor-driven, triplex plunger pump; and include an unloader, gauge, and quick disconnect. Some models include a chemical injector, 50’ (15 m) pressure wash hose, trigger gun and insulated wand with adjustable Hi-Lo and Variable-Angle cleaning nozzle. Certain models are also equipped with a chemical injector. Model Number 1802C* 1803C 1804C* 1805C 1806C* 1807C 1824C* 1825C 1826C* 1827C Max GPM 3 3 3 3 3 3 4 4 4 4 Max LPM 11.4 11.4 11.4 11.4 11.4 11.4 15.1 15.1 15.1 15.1 Max PSI 1000 1000 1500 1500 2000 2000 1500 1500 2000 2000 * Includes 50 ft (15 m) hose and gun assembly Max BAR 68.9 68.9 103.4 103.4 137.9 137.9 103.4 103.4 137.9 137.9 Hydraulic Motor Requirements GPM LPM PSI BAR 5 18.9 1300 89.6 5 18.9 1300 89.6 8 30.3 1900 131 8 30.3 1900 131 11 41.6 1300 89.6 11 41.6 1300 89.6 8.5 32.2 2000 137.9 8.5 32.2 2000 137.9 8.5 32.2 2000 137.9 8.5 32.2 2000 137.9 Description Forged Brass Head Triplex Pumps with hydraulic motor, adjustable unloader, gauge, 1/2” NPT input, 3/8” quick disconnect output Forged Brass Head Triplex Pumps with hydraulic motor, chemical injector, adjustable unloader, gauge, 3/4” GH input, 3/8” quick disconnect output 115 Weight LBS KG 38 17.2 28 12.7 41 18.6 26 11.8 41 18.6 26 11.8 49 22.2 33 14.9 49 22.2 33 14.9 PISTON AND PUMPS PLUNGER PUMPS Small Twin Piston/Plunger Accessories Pressure-Activated 3 Port Unloaders Model Number Inlet/ Outlet PSI Bar 3390-0062D* 200-600 14-41 3390-0063D* 400-1000 28-69 3390-0071D* 1 3/8” (M) NPT Max LPM Max Temp Max Temp Cup Material Ref # 5 19 180° F 82° C Buna-N 1 160° F 71° C Leather 28-69 800-1500 55-103 3390-0072D*T 800-1500 55-103 3390-0006 200-500 14-34 5 19 200-500 14-34 5 19 300-1000 21-69 6 23 1000-2000 69-138 15 57 3390-0007 3390-0037 3390-0053 3 1/4” (F) NPT Max GPM 400-1000 T 3390-0067D* 2 Pressure Range Bypass 1/2” (F) NPT 1/2” (F) NPT 3/4” (F) NPT 3/4” (F) NPT Buna-N 2 Buna-N/Teflon 200° F 93° C Buna-N 3 * Recommended for use with 5300 Series pumps T For close-coupled bypass operation with Hypro 2200 and 2300 Series PowerLine Plus pumps, bypass not NPT. Use only with 8000-0007 and 80000-0008. Pressure-Activated 3 or 5 Port Unloaders with Adjustment Knob 1 2 3 Model Number # of Ports Inlet/ Outlet 3390-0079 3 3/8” (M)NPT 3390-0102 3 3/8” (M)NPT Max PSI Max Bar 2000 138 2600 179 Bypass 3/8” (F) NPT 1/4” (F)NPT 3390-0076 3 3/8” (F)NPT 1/4” (F)NPT 3390-0081 5 (2) 3/8” (F)NPT x 3/8” (F)NPT (2) 1/4” (F)NPT 3600 248 3600 248 Max GPM Max LPM Max Temp Max Temp Cup Material Ref # 1 2 8 30 200° F 93° C Buna-N 3 4 4 Pressure-Activated Unloader/Bypass Kits Model Number 8000-0007 8000-0008 Pressure Range Inlet/Outlet 1/2” (F)NPT x 3/8” (M)NPT PSI Bar 400-1000 28-69 800-1500 55-103 Max GPM Max LPM Max Temp Max Temp Description 5 19 200° F 93° C 3 port unloader/bypass system with adjustable knob for 2200 and 2300 series PowerLine Plus Pumps. Closed-Coupled Unloaders Model Number 33900104/3A Inlet/Outlet Max PSI 1/2” (F)NPT x 2600 3/8” (M)NPT Injector Orifice Range Max Max Max Bar GPM LPM 180 8 30 GPM LPM 2.0-3.2 7.6-12.1 Max Temp Max Temp Description 2 port unloader/bypass system 200° F 93° C with built-in chemical injector and adjustable knob. For 2200 & 2300 series PowerLine Plus pumps. Adjustable & Fixed Chemical Injectors Model Number 1 2 3396-0034/1.8 3396-0031/2.1 3396-0033/2.3 Inlet/Outlet Max PSI Max Bar GPM Range 3/8” (F)NPT x 3/8” (M)NPT 0-2.9 0-11 3200 220 3.0-4.0 11-15 4.0-5.0 15-19 116 LPM Range Max Temp Max Temp Type 200° F 93° C Adjustable Fixed Fixed Materials Forged brass body; Stainless Steel Ball & Spring Ref # 1 2 1 Power Adjustable Injector for 2200/2300 Pumps Model Number 3396-0011 3396-0025 Inlet 1/8” (F) NPT Max PSI Max Bar 1500 103 3000 207 GPM Range LPM Range 2.0-4.8 7.5-18 Max Temp Max Temp 140° F 60° C 160° F 71° C Materials For Models Description 2200 & 2300 Brass & Stainless Steel 9-step calibrated metering 2200B-P & 2300B-P Power Adjustable Injector for 5300 Pump Model Number 3396-0014 Max PSI Inlet 500 1/8” (F) NPT 3396-0006 1000 Max GPM Bar Range 34 LPM Range Max Temp Max Temp 140° F 60° C 1.5-3.0 5.7-11 69 2 7.5 Description For Models Materials Cast iron cylinder 9-step adjustable, head; brass needle-type mettering and stainless assembly for precise steel internal metering of soaps and components liquids 5300CX 5321 & 5342C Replaces standard head on Series 5300 and 5321 pumps Regulator/Relief Valve - Provides smooth, constant pressure regulation Model Number Inlet/Outlet Max PSI Max Bar 3300-0084 3/8” (F)NPT 2000 138 Balanced Pressure PSI Bar 200-2000 14-138 Max GPM Max LPM Max Temp Max Temp Materials 7 26 160° F 71° C Brass Body; Stainless Steel plunger & seat High Flow Pressure Regulator/Relief Valve for 2535S & 2545S Pumps 1 Model Number Inlet/Outlet 3300-0102 3/4” x 1/2” 3300-0103 1” x 1” Max PSI Max Bar 2000 138 Balanced Pressure PSI Bar 260-2000 18-138 Max GPM Max LPM 53 200 55 208 2 Thermal Relief Valve Easy mount valve to safeguard pumps from damaging heat generaged within recirculating water systems. Easy to service without removing. Model Number 3312-0004 3312-0005* Inlet Max PSI Max Bar Relief Temp Relief Temp Materials 1/2” (M) NPT 200 14 145° F 63° C Brass, Stainless Steel & Buna-N Dimensions 1-1/16” Hex x 1-11/16” 1-1/16” Hex x 2-1/2” * 3/16" barb fittings Screw Couplings & Connecting Nipples Model Number Screw Couplings Connecting Nipples Screw Couplings Connecting Nipples Inlet 3341-0001 3341-0005 3/8” (F)NPT 3341-0002 3341-0006 1/4” (F)NPT 3341-0003 3341-0007 3/8” (M)NPT 3341-0004 3341-0008 1/4” (M)NPT 117 Max PSI Max Bar Max GPM Max LPM Max Temp Max Temp 3500 241 12 45 300° F 149° C CENTRIFUGAL PUMPS PISTON AND PLUNGER PUMPS Piston/Plunger Accessories Piston/Plunger Accessories C-Flange Kits Model Number Fits Motor For Models 8000-0003 NEMA 56C, 143TC and 145TC 2200, 2300, 2350 8000-0010 NEMA 182TC and 184TC 2200, 2300, 2350 8000-0043 NEMA 213TC and 215TC 2200B-P & 2300B-P 8000-0017 NEMA 213TC and 215TC 2400 & 2430 8000-0018 NEMA 182TC and 184TC 2400 & 2430 Pulsation Dampeners These quality-built pulsation dampeners protect your system from damage due to pulsation and vibration. Choose the size and capacity that meets your system’s needs. In most applications, the recommended dampener charge is 1/2 of the operating pressure with a 2-piston pump and 2/3 of the operating pressure with a 3-piston pump. Model Number 1 2 Charge PSI Charge Bar 200-1000 14-69 Inlet 3375-0015-x 1” (F)NPT 3375-0017-x 1/2” (F)NPT Max GPM Max LPM 35 132 2500 Series 1 6 23 2000 Series 2 For Models Ref # Note: Replace 'x' with maximum charge designation; Example: 3375-0015-8 = 800 psi, 3375-0017-7 = 700 psi Available in 100 psi increments from 200 psi to 1000 psi. Pulsation Dampener Checker For testing the charge pressure in pulsation dampeners. The proper charge will ensure maximum life and performance of pressure systems. Model Number Connection 2642-0001 5/16” 32 UNEF (F) Thread Max PSI Max Bar 2000 138 Pulse Hoses Quality pulsation dampener hoses constructed of special Hi-Flex horizontally-braided hose. Model Number Length 3375-0008 24” (61 cm) 3375-0012 24” (61 cm) 3375-0021 25” (63.5 cm) Max PSI Max Bar Connection 3/8” (F)NPT x 3/8” (M)NPT 1500 103 3/8” (F)NPT x plugged end 1/4” (M)NPT x plugged end Gear Boxes Model Number Inlet/Outlet Max Max PSI Bar Max Max Temp Temp 8000-0015 3/8” (F)NPT x 3200 220 3/8” (M)NPT 8000-0021 118 200° F 93° C Description 1.8:1 gearbox kit for mounting 10 hp-18 hp gas engines with 1-1/8” solid shaft (Kohler engines) Materials Forged brass body; Stainless steel ball and 1.8:1 gearbox kit for mounting spring 8 hp-18 hp gas engines with 1” solid shaft (B&S and Honda engines) Zinc-Plated Steel Port Adapters Port Openings Model Number 1 - End 2 - Gauge Port 3 - Side 4 - End 2404-0030 1/2” (M)NPT 1/4” (F)NPT 1/2” (F)NPT 1/2” (F)NPT 2404-0019 3/4” (M)NPT 1/4” (F)NPT 1/2” (F)NPT 3/4” (F)NPT Float Tank Strainer Model Number Tank Outlet Filter Outlet 3800-0074 1/2” 1/2” (M)NPT Vacuum Switches Model Number Performance 2510-0001 VAC-ON: 1.5 Hg vac. 2510-0007 VAC-ON: 2.5 Hg vac. 2510-0017 VAC-ON: 4.5 Hg vac. Max Temp Max Temp 140° F 60° C Pump Oil v Model Number Size Decriptions 2160-0038 1 qt. (12 per carton) 2160-0047 1 gallon (bulk) 2160-0048 2-1/2 gallon (bulk) Speciallyformulated pump oil Features • Switches can be used with either AC or DC motors in the ratings shown • DC (32-115-230V): up to 1/2 hp • Single or 3 Phase at 110V: up to 2 hp 220V: up to 2 hp • VAC-ON switch automatically shuts off motor when liquid is depleted or vacuum drops to a specific level Features • • • • • Reduces scuff and wear in piston and plunger pumps Inhibits moisture that causes damage Prevents oxidation that could lead to sludge formation Resists foaming and aeration that can cause equipment to operate erratically and oil to oxidize Provides smooth pump operation in a variety of temperatures Pressure Switch Model Number Inlet Max PSI Max Bar Max Temp Max Temp Voltage Max Amp Vertical and Horizontal Mount 2510-0029 3/8” (M)NPT 3500 241 200° F 93° C 12-250V 15A 119 CENTRIFUGAL PUMPS PISTON AND PLUNGER PUMPS Piston/Plunger Accessories Piston/Plunger Accessories Float Switch Max PSI Model Number Inlet/Outlet 2510-0030 3/8” (F)NPT x 3/8” (F)NPT 2510-0031 3/8” (M)NPT x 3/8” (M)NPT Max Bar Max GPM Max LPM Max Temp Max Temp Voltage Mount Vertical 3500 241 7.8 30 180° F 82° C 12-250V Horizontal Aluminum Line Strainer Model Number Inlet/Outlet Max PSI Max Bar Max GPM Max LPM Housing Material Screen Mesh Bypass Hose Port 3350-0134 1/2” (F)BPS x 1/2” (M)BPS 100 7 8 30 Aluminum 50 G 1/4” Screen Mesh Material 50 Stainless Steel Screen Suction Strainer Model Number Opening Overall Size (ID) Diameter Size 3350-0021 1.25” 1/4” (ID) plastic tubing .330” 3350-0033 5/8” (ID) x 61/64” (OD) garden hose .940” 2.187” 3800-0035 (F) garden hose end .57” 1.016” 3350-0022 1” Chemical Injector Strainer Model Number 3350-0126 3350-0127 3350-0128 Hose Barb Material Check Valve 1/4” & 3/8” Chemical-resistant plastic body and components Yes 1/4” Corrosion-resistant stainless steel and brass construction Yes 120 No Couplers Series 2738 (2.0 hp limit)* Replaces L-075 Inches mm 1/8” 3/16” 1/4” 1/2” 5/8” 3/4” 7/8” 3.2 mm 4.7 mm 6.4 mm 13 mm 15.9 mm 19 mm 22.2 mm 15/16” 1” 1-1/8” 23.8 mm 25.4 mm 28.6 mm Note: These couplers are designed for inch dimensional shafts and keys. Metric dimensions are for reference only (except for 2739-1009). 2739 (5.0 hp limit)* Replaces L-095 2741 (10.5 hp limit)* Replaces L-100 2740 (18.0 hp limit)* Replaces L-110 Part Number Description 2738-1001 2738-1002 2738-1003 2738-1004 2728-1001 2739-1001 2739-1002 Estimated Weight Each US Units Metric 1⁄2” coupling end, with 1⁄8” keyway 5⁄8” coupling end, with 3⁄16” keyway 3⁄4” coupling end, with 3⁄16” keyway 7⁄8” coupling end, with 3⁄16” keyway Center disc 5⁄8” coupling end, with 3⁄16” keyway 3⁄4” coupling end, with 3⁄16” keyway 6 oz. 6 oz. 6 oz. 6 oz. 1 oz. 11 oz. 11 oz. 170 g 170 g 170 g 170 g 28 g 312 g 312 g 2739-1003 2739-1004 2739-1005 2739-1006 2739-1009 2729-1001 7⁄8” coupling end, with 3⁄16” keyway 15⁄16” coupling end, with 1⁄4” keyway 1” coupling end, with 1⁄4” keyway 1-1⁄8” coupling end, with 1⁄4” keyway 24 mm coupling end, with 8mm keyway Center disc 11 oz. 11 oz. 11 oz. 11 oz. 11 oz. 1 oz. 312 g 312 g 312 g 312 g 312 g 28 g 2729-1005 2741-1001 2741-1004 2741-1002 2741-1005 2741-1007 2741-1003 2729-1002 2729-1006 2740-1001 Heavy-duty center disc, urethane material 3⁄4” coupling end, with 3⁄16” keyway 15⁄16” coupling end, with 1⁄4” keyway 1” coupling end, with 1⁄4” keyway 1-1⁄4” coupling end, with 1⁄4” keyway 1-3⁄8” coupling end, with 5⁄16” keyway 1-1⁄8” coupling end, with 1⁄4” keyway Center disc heavy-duty center disc, urethane material 3⁄4” coupling end, with 3⁄16” keyway 1 oz. 1 lb. 5 oz. 1 lb. 5 oz. 1 lb. 5 oz. 1 lb. 5 oz. 1 lb. 5 oz. 1 lb. 5 oz. 1 oz. 1 oz. 3 lbs. 11 oz. 28 g 595 g 595 g 595 g 595 g 595 g 595 g 28 g 28g 1.67 kg 2740-1002 2740-1005 2740-1007 2729-1003 1” coupling end, with 1⁄4” keyway 1-3⁄8” coupling end, with 5⁄16” keyway 1-1⁄8” coupling end, with 1⁄4” keyway Center disc 3 lbs. 8 oz. 3 lbs. 2 lbs. 15 oz. 3 oz. 1.59 kg 1.4 kg 1.33 kg 85 g * HP limit is electric motor hp at 1725 rpm for driving a steady uniform load. For an uneven load, stop-start and moderate shock loads, divide hp by a 1.5 service factor. Ordering Instructions: To order one 1⁄2” x 3⁄4” Series 2738 coupling, specify the following: Note: It is not necessary to order in complete sets, parts can be ordered individually. 121 Quantity Part Number Description 1 2738-1001 1⁄2” coupling end 1 2738-1003 3⁄4” coupling end 1 2728-1001 Center disc PISTON AND PLUNGER PUMPS Piston/Plunger Accessories VERSA-TWIN 2130 Series Plunger Pumps • Molded from Noryl GTX for chemical resistance against fertilizers, insecticides, chlorides, acids, and bleach • Robust motor, ceramic plunger, and crank drive provide market-leading long life without servicing 2130P-D183 • 4-point 1” NPT flynut-ready connections allow for greater flexibility in plumbing, easy installation and servicing, draining and maintenance 2130P-A055 • 1” ports allow for single-sided inlet plumbing 2130P-D355 • Available in standard models up to 4.0 GPM (15.1 L/min) & 300 PSI (20.7 BAR) 2130P-D395 Order Information Model Number Max GPM Max L/min Max PSI Max BAR Max RPM Motor Type Ports 2130P-D183 2.5 9.5 150 10.3 2200 ¼ HP 12V DC Motor, 20 amps 2130P-D355 2.8 10.6 300 20.7 2000 ½ HP 12V DC Motor, 35 amps 2130P-D359 3.9 14.8 200 13.8 2000 ½ HP 12V DC Motor, 35 amps 2130P-D395 2.9 11.0 300 20.7 2000 ½ HP 12V DC Motor, 56C, 39 amps 2130P-D399 4.0 15.1 200 13.8 2000 ½ HP 12V DC Motor, 56C, 39 amps 1" MNPT 2130P-A055 2.4 9.1 300 20.7 1750 ½ HP 115-208/230V AC Motor, 1 PH 50/60 Hz 2130P-A079 3.9 14.8 300 20.7 1750 ¾ HP 115-208/230V AC Motor, 1 PH 50/60 Hz 2130PX Replacement pump head Performance 0 PSI / 0 BAR Model Number GPM L / min 2130P-D183 ¹ 2130P-D355 ¹ 2130P-D359 ¹ 2130P-D395 ¹ 2130P-D399 ¹ 2130P-A055 ² 2130P-A079 ² 2.5 9.5 2.8 10.6 3.9 14.8 2.9 11.0 4.0 15.1 2.4 9.1 3.9 14.8 * indicates intermittent duty only AMPS 50 PSI / 3.5 BAR GPM L / min 5.2 9.1 11.6 8.3 11.0 6.5 8.9 ¹ Tested at 13.5 VDC 2.2 8.3 2.5 9.5 3.2 12.1 2.5 9.5 3.5 13.2 2.2 8.3 3.4 12.9 AMPS 9.8 13.4 17.2 13.0 17.2 6.6 9.0 100 PSI / 6.9 BAR GPM L / min 2.0 7.6 2.4 9.1 3.1 11.7 2.4 9.1 3.3 12.5 2.1 7.9 3.3 12.5 AMPS 150 PSI / 10.3 BAR GPM L / min 1.8 14.6 * 6.8 2.3 18.9 8.7 3.0 21.5 * 11.4 2.3 19.0 8.7 3.1 24.0 11.7 2.1 6.7 7.9 3.2 9.1 12.1 ² Tested at 110 VAC 122 AMPS 19.3 * 23.5 26.2 * 23.5 29.3 6.8 9.5 200 PSI / 13.8 BAR GPM L / min 2.2 8.3 2.8 10.6 2.2 8.3 3.0 11.4 2.0 7.6 3.1 11.7 AMPS 27.5 * 31.8 * 27.2 34.2 7.0 9.8 250 PSI / 17.2 BAR GPM L / min 2.1 7.9 2.1 7.9 1.9 7.2 3.0 11.4 AMPS 30.9 * 30.7 7.2 10.1 300 PSI/ 20.7 BAR GPM L / min 2.0 7.6 2.0 7.6 1.9 7.2 2.9 11.0 AMPS 34.8 * 33.9 7.3 10.6 the industry-first integrated automatic-demand pressure switch SPECIALTY PUMPS VERSA-TWIN 2130 Series Plunger Pumps with Pressure Switch • Integrated pressure switch designed for the pump to work as a demand pump • Extends the life of the pump when the duty cycle is less than 100%, for example, a 50% duty cycle extends the life of the system two times and a 25% duty cycle extends the life four times • Reduces end-user installation charges by allowing a system to be set up for overnight charging versus continuous charging through a custom, high-amp vehicle alternator and heavy-gage wiring system 2132P-D355 2132P-D359 2132P-D395 2132P-D399 2132P-D183 Order Information Model Number Max GPM Max L/min Max PSI Max BAR Max RPM Motor Type Pressure Switch 2132P-D183 2.5 9.5 150 10.3 2200 1/4 HP 12V DC Motor, 20 amps 150-250 PSI (10.3-17.2 BAR) Ports 2132P-D355 2.8 10.6 250 17.2 2000 1/2 HP 12V DC Motor, 35 amps 150-250 PSI (10.3-17.2 BAR) 2132P-D359 2132P-D395 3.9 2.9 14.8 11.0 200 250 13.8 17.2 2000 2000 1/2 HP 12V DC Motor, 35 amps 1/2 HP 12V DC Motor, 39 amps 150-250 PSI (10.3-17.2 BAR) 150-250 PSI (10.3-17.2 BAR) 2132P-D399 4.0 15.1 200 13.8 2000 1/2 HP 12V DC Motor, 39 amps 150-250 PSI (10.3-17.2 BAR) 2133P-D355 2.8 10.6 300 20.7 2000 1/2 HP 12V DC Motor, 35 amps 250-350 PSI (17.2-24.1 BAR) 2133P-D395 2.9 11.0 300 20.7 2000 1/2 HP 12V DC Motor, 56C, 39 amps 250-350 PSI (17.2-24.1 BAR) 2132PX 2133PX Replacement pump head & switch Replacement pump head & switch 1" MNPT 150-250 PSI (10.3-17.2 BAR) 250-350 PSI (17.2-24.1 BAR) Performance 0 PSI / 0 BAR Model Number GPM L / min 2132P-D183 ¹ 2132P-D355 ¹ 2133P-D355 ¹ 2132P-D359 ¹ 2132P-D395 ¹ 2133P-D395 ¹ 2132P-D399 ¹ 2.5 9.5 2.8 10.6 3.9 14.8 2.9 11.0 4.0 15.1 * indicates intermittent duty only AMPS 5.2 9.1 11.6 8.3 11.0 50 PSI / 3.5 BAR GPM L / min 2.2 8.3 2.5 9.5 3.2 12.1 2.5 9.5 3.5 13.2 ¹ Tested at 13.5 VDC AMPS 9.8 13.4 17.2 13.0 17.2 100 PSI / 6.9 BAR GPM L / min 2.0 7.6 2.4 9.1 3.1 11.7 2.4 9.1 3.3 12.5 AMPS 14.6 * 18.9 21.5 19.0 24.0 150 PSI / 10.3 BAR GPM L / min 1.8 6.8 2.3 8.7 3.0 11.4 2.3 8.7 3.1 11.7 ² Tested at 110 VAC 123 AMPS 19.3 * 23.5 26.2 * 23.5 29.3 200 PSI / 13.8 BAR GPM L / min 2.2 8.3 2.8 10.6 2.2 8.3 3.0 11.4 AMPS 250 PSI / 17.2 BAR GPM L / min AMPS 300 PSI/ 20.7 BAR GPM L / min AMPS - - - - - 27.5 * 2.1 7.9 30.9 * 2.0 7.6 34.8 * 31.8 * - - - - 27.2 2.1 7.9 30.7 2.0 7.6 33.9 34.2 - - - - VERSA-TWIN 2150 Series Diaphragm Pumps Order Information 2150P-D35DC Max GPM 7 Max LPM 26.5 Max PSI 100 Max BAR 6.9 Max RPM 1800 1/2 HP 12V DC Motor, 35 amps 2150P-D39DC 8.3 31.4 100 6.9 1800 1/2 HP 12V DC Motor, 56C, 39 amps 2150P-D05AC 6.7 25.4 100 6.9 Model Number Model 2150P-D35DC¹ 2150P-D39DC¹ 2150P-D05AC2 GPM AMPS LPM AMPS 0 PSI/0 BAR 7.0 12.9 26.5 8.3 15.7 31.4 6.7 7.6 25.4 Motor Type 1750 1/2 HP 115-208/230 VAC Motor,1 PH, 50/60 Hz 2150PX Replacement pump head 3430-0633 Diaphragm repair kit 3430-0634 Diaphragm valve kit GPM AMPS LPM AMPS 20 PSI/1.4 BAR 6.6 17.2 25.0 7.6 19.7 28.8 6.4 7.7 24.2 GPM AMPS LPM AMPS 40 PSI/2.8 BAR 6.0 22.3 22.7 6.7 23.8 25.4 6.0 7.8 22.7 * Indicates intermittent duty only ¹ Tested at 13.5 VDC ² Tested at 110 VAC Ports GPM AMPS LPM AMPS 60 PSI/4.1 BAR 5.6 26.8* 21.2 6.1 27.8 23.1 5.7 7.9 21.6 GPM AMPS LPM AMPS 80 PSI/5.5 BAR 5.2 31.2* 19.7 5.7 31.9 21.6 5.3 8.0 20.1 3/4" MNPT GPM AMPS LPM AMPS 100 PSI/6.9 BAR 5.0 35.3* 18.9 5.3 35.9 20.1 5.0 8.2 18.9 Versa-Twin Accessories Hosebarb Fly Nut Fittings O-ring Groove x Hose Barb Fitting Part Number 1" x 1" straight FNS-100100 1" x 3/4" straight FNS-10034 1" x 1/2" straight FNS-10012 1" x 1" elbow FNE-100100 1" x 3/4" elbow FNE-10034 NPT Fly Nut Fittings Fly nut Part Number 3B100 O-ring Part Number 1721-0010 Part Number 3390-0062D 200-600 Fitting Part Number 1" x ¾" MNPT * 2404-0427 1" x ½" MNPT 2404-0419 Fly nut Part Number O-ring Part Number 3B100 1721-0010 * Compatible with other fly-nut fittings in catalog Fly Nut Cap Unloader Valve Operating PSI Fly Nut connection X NPT O-ring Groove x NPT Description Part Number 1" NPT with gasket FNCAP-100N Replacement gasket 01WSHR13 Pulse Hose Operating BAR Use With Material 13.8-41.4 35 & 39 amp DC, and all AC motors Brass, Buna-N Cup Part Number Max PSI Max BAR 3375-0025* 1500 183.4 Description 9 ft Pulse Hose, 3/8” (M)NPT w/ one plugged end *Used with all pressure switch models when using rigid pipe, rigid or semi-rigid hose (working pressure greater than 600 psi) or any hose less than 150 ft. Relief Valve Part Number Operating PSI Operating BAR Material Ports (Inlet x Outlet) Use With 3300-0001 400 27.6 Bronze 3/4" MNPT x 3/4” FNPT 35 & 39 amp DC, and all AC motors 3300-0002 200 13.8 Bronze 1/2" MNPT x 1/2" FNPT 18 amp DC motors 3300-0015 150 10.3 Nylon 3/4” MNPT x 3/4” FNPT 18 amp DC motors 3300-0016 250 17.2 Nylon 3/4” MNPT x 3/4” FNPT 35 & 39 amp DC, and all AC motors 3300-0098 400 27.6 Nylon 3/4” MNPT x 3/4” FNPT 18 amp DC motors 3301-0001 400 27.6 Bronze 3/4” MNPT x 3/4” FNPT 35 & 39 amp DC, and all AC motors 124 Electric-Driven Centrifugal Pumps – Noryl ® SPECIALTY PUMPS Model 9940-9750NRL, 9940-9751NRL, 9940-9753NRL Model 9940-9750NRL Model 9940-9751NRL Model 9940-9753NRL • Noryl, pedestal mount, direct drive • Noryl, close-coupled, AC motordriven (60 Hz), centrifugal pump • Noryl, close-coupled, AC motor-driven (60 Hz), centrifugal pump • Max. fluid temperature: 140°F/60°C • Port sizes: • Port sizes: • Housing: Noryl (chemical-resistant, coated, cast iron bearing housing) • Max. fluid temperature: 140°F/60°C • Max. fluid temperature: 140°F/60°C • Housing: Noryl • Housing: Noryl • Impeller: Noryl • Impeller: Noryl • Impeller: Noryl • Pump shaft rotation: CW* • Motor: 3⁄4 hp, 115 ⁄ 208-230V AC • Motor: 1-1⁄2 hp, 115 ⁄ 208-230V AC • Shaft seals: Viton®/ceramic with polypropylene case • Shaft seals: Viton®/ceramic with polypropylene case • Shaft seals: Viton®/ceramic with polypropylene case • Weight: 12 lbs./5.4 kg • Weight: 34 lbs./15.4 kg • Weight: 39 lbs./17.7 kg • Port sizes: 1-1⁄2" NPT inlet 1-1⁄2" NPT outlet 1-1⁄2" NPT inlet 1-1⁄2" NPT outlet 1-1⁄2" NPT inlet, 1-1⁄2" NPT outlet Order Information Max GPM 140 47 91 Model Number 9940-9750NRL 9940-9751NRL 9940-9753NRL Max LPM 530 178 344 Max PSI 39 30 35 Max BAR 2.7 2.1 2.4 Max RPM 3600 3450 3450 9940-9750NRL RPM 3000 3450 3600 GPM 103 126 132 9940-9750NRL RPM 3000 3450 3600 LPM 390 477 500 10 PSI HP 1.5 2.4 2.7 0.7 BAR HP 1.5 2.4 2.7 GPM 90 114 121 LPM 341 432 458 15 PSI HP 1.4 2.4 2.6 1.0 BAR GPM 72 101 110 20 PSI HP 1.4 2.2 2.5 GPM 38 86 97 HP 1.4 2.4 2.6 LPM 273 382 416 1.4 BAR HP 1.4 2.2 2.5 LPM 144 326 367 9940-9751NRL, 9940-9753NRL MODEL 9751 9753 GPM 44 88 5 PSI AMPS 7.9 14.1 GPM 39 82 10 PSI AMPS 8.0 14.0 GPM 32 74 15 PSI AMPS 8.3 14.0 9940-9751NRL, 9940-9753NRL MODEL 9751 9753 0.3 BAR LPM AMPS 167 7.9 333 14.1 0.7 BAR LPM AMPS 148 8.0 310 14.0 1.0 BAR LPM AMPS 121 8.3 280 14.0 GPM 25 66 HP 1.0 2.2 2.5 1.7 BAR 20 PSI HP 1.0 2.2 2.5 AMPS 8.5 14.4 1.4 BAR LPM AMPS 95 8.5 250 14.4 Noryl® is a registered trademark of of Sabic Innovative Plastics Holding BV. Hypro® is a registered trademark of Pentair. 125 25 PSI GPM 30 PSI 64 80 LPM 2.1 BAR 242 303 GPM 15 55 25 PSI HP GPM 1.9 2.3 14 52 U.S. Units 35 PSI HP 1.4 2.0 Metric Units HP LPM 1.9 2.3 53 197 2.4 BAR HP 1.4 2.0 U.S. Units AMPS 8.5 14.4 1.7 BAR LPM AMPS 57 8.5 208 14.4 GPM 2 37 30 PSI AMPS 8.4 13.6 Metric Units 2.1 BAR LPM AMPS 8 8.4 140 13.6 Hydraulic-Driven Gear Pump Model 8304B-HM5C This positive-displacement pump is ideal for de-icing/anti-icing (pre-wet). Combining the pump and motor as a single unit eliminates the need for shaft alignment or Love-Joy® coupling. The unit’s compact size allows it to be used in a wide variety of locations and makes it especially attractive for quick, easy retrofit installations. Pump • Optional pressure relief valve safeguards against pressure buildup • Industry-proven gear pump design, minimal moving parts for longevity • Brass material not corroded by salt solutions Motor Order Information Model Number 8304B-HM5C 8304B 8304BV Max GPM 10.4 10.4 10.4 Max LPM 39.4 39.4 39.4 Max PSI 100 100 100 Max BAR 6.9 6.9 6.9 Max Hyd Max Hyd GPM LPM 4.5 17 4.5 17 4.5 17 • State-of-the-art internal gear gerotor motor maximum service for any application • Bypass adjustment allows fine tuning of flow control • 1⁄2" NPT ports with anti-reverse check safeguards against change in flow direction Hydraulic Flow (GPM) GPM at 0 PSI GPM at 10 PSI GPM at 20 PSI GPM at 30 PSI GPM at 40 PSI GPM at 50 PSI GPM at 60 PSI GPM at 70 PSI GPM at 80 PSI GPM at 90 PSI GPM at 100 PSI 3.0 3.5 4.0 4.5 6.9 8.1 9.2 10.4 6.5 7.7 8.9 10.1 6.1 7.3 8.5 9.7 5.7 6.9 8.1 9.3 5.3 6.6 7.8 9.0 4.9 6.2 7.4 8.6 4.5 5.8 7.0 8.2 4.1 5.4 6.7 7.9 3.7 5.0 6.2 7.5 3.3 4.6 5.9 7.1 2.9 4.2 5.5 6.8 This data was generated using water as the pumping media. Performance will vary with different viscosity fluids. Hydraulic pressures vary from 200 to 850 PSI for the performance chart above. * Product is to be run above 2.0 GPM hydraulic flow. Aqua-Tiger - 12-Volt Centrifugal Pump Model 9700B and 9700S • 12-volt DC motor drive • Port sizes: 3⁄4" NPT inlet, 3⁄4" NPT outlet • Max. fluid temperature: 140°F/60°C • Housing: bronze or stainless steel • Impeller: bronze (9700B) or stainless steel (9700S) • Seal: lip-type Viton (9700B); mechanical (9700S) • Weight: 6 lbs./2.7 kg Order Information Model Number 9700B 9700S Max GPM 19 19 9700B, 9700S – 13.5 VDC (Alternator Engine Running) Max LPM 72 72 Max PSI 7 7 Max BAR 0.48 0.48 Max Draw 11 Amps 11 Amps 2 PSI GPM AMPS 16.9 5.3 3 PSI GPM AMPS 14.0 5.0 4 PSI GPM AMPS 12.5 4.9 5 PSI GPM AMPS 10 4.9 6 PSI GPM AMPS 6.5 4.1 9700B, 9700S – 13.5 VDC (Alternator Engine Running) 0.14 BAR LPM AMPS 62 5.3 0.21 BAR LPM AMPS 53 5.0 126 0.28 BAR LPM AMPS 47 4.9 0.34 BAR LPM AMPS 38 4.9 0.41 BAR LPM AMPS 25 4.1 U.S. Units 7 PSI GPM AMPS 2.7 3.7 Metric Units 0.48 BAR LPM AMPS 10 3.7 Hypro Cutaway Policy If you would like to borrow a cutaway, order your cutaway and then return it to Hypro (with Return Materials Authorization – RMA – number) before 60 days from your date of receipt. When Hypro receives the cutaway, full credit will be issued. Due to the increase in demand of Hypro cutaways for effective sales promotions, Hypro is offering pump cutaways on a purchase or loan basis. To purchase a cutaway, follow the normal procedure for ordering a pump. If you would like a pump or accessory that is not listed on this page, please call the Hypro factory at 800-424-9776 (US) or +44 1954 260097 (Europe) Roller Pump Cutaways Model Number Description Estimated Weight Ea. US Units Metric Units 8 lbs. 3.6 kg CA6500C Standard 6-roller cast iron pump CA6500N Standard 6-roller Ni-resist pump 8 lbs. 3.6 kg CA6500XL Standard 6-roller Silver Series XL pump 8 lbs. 3.6 kg CA7560C Standard 8-roller cast iron pump 13 lbs. 5.9 kg CA7560N Standard 8-roller Ni-resist pump 13 lbs. 5.9 kg CA7560XL Standard 8-roller Silver Series XL pump 13 lbs. 5.9 kg Centrifugal Pump Cutaways Model Number Description CA9006C-O Standard 540 rpm gear drive cast iron pump Estimated Weight Ea. US Units Metric Units 44 lbs. 20.0 kg CA9006P-O Standard gear drive polypropylene pump 37 lbs. 16.8 kg CA9202C Standard pedestal mount cast iron pump 18 lbs. 8.2 kg CA9203P-S Standard pedestal mount polypropylene pump 14 lbs. 6.4 kg CA9303C-HM4C Standard hydraulic motor cast iron pump 22 lbs. 10.0 kg CA9303P-HM4C Standard hydraulic motor polypropylene pump 15 lbs. 6.8 kg Diaphragm Pump Cutaways Model Number Description Estimated Weight Ea. US Units Metric Units 23 lbs. 10.4 kg CA9910-D30 Standard 2 diaphragm pump CA9910-D30GRGI Standard 2 diaphragm pump with GS40GI control unit 33 lbs. 15.0 kg CA9910-D70 Standard 2 diaphragm pump 25 lbs. 11.3 kg CA9910-D115 Standard 3 diaphragm pump 35 lbs. 15.9 kg CA9910-KIT1640 Gear Reduction Kit 6 lbs. 8oz. 2.9 kg Piston/Plunger Pump Cutaways Model Number Description CA5210C Standard 5200 series cast iron piston pump Estimated Weight Ea. US Units Metric Units 18 lbs. 8.2 kg CA5320C-HRX Standard 5300 series cast iron piston pump 10 lbs. 4.5 kg CA5321C-H Standard 5321 series cast iron plunger pump 11 lbs. 5.0 kg CA5324C Standard 5324 series cast iron piston pump 11 lbs. 5.0 kg 127 SPECIALTY PUMPS Pump Cutaways POWERPRO Gasoline Engines High Quality, Field-Proven Engine • Available in multiple horsepower options to suit a diverse range of agricultural, industrial, and lawn & garden applications 6.5 HP • Electric-start option available for quick start-up • Dual-element air filter provides highest degree of filtering • Cast iron cylinder sleeve for commercial use • Overhead valve for cleaner operation on all models • Equipped with a robust low-oil sensor to prevent engine damage • CARB/EPA certified engines • Engines can be configured to various Hypro pump models or purchased individually • Supported with a one-year warranty from Hypro; repair parts available for easy servicing 2.5 HP 13 HP Electric Start PowerPro Gasoline Engines, Recoil Start CARB & EPA Part Number 2549-0043 2549-0042 2541-0045 2541-0046 2541-0048 2541-0050 EC Part Number --2541-0065 ---- PowerPro Gasoline Engines, Electric Start HP Shaft Size 2.5 2.5 6.5 6.5 13 13 5⁄8" Keyed 1⁄2" with Flat 3⁄4" Keyed 5⁄8" Threaded 1" Keyed 1" Threaded CARB & EPA Part Number HP 2541-0053 6.5 3⁄4" Keyed 2541-0054* 6.5 2:1 reduced 3⁄4" Shaft 2541-0055 6.5 5⁄8" Threaded 2541-0049 13 1" Keyed 2541-0051 13 1" Threaded * Special order only, 100 pc. Minimum Order 128 Shaft Size Spray Nozzles Broadcast Spray Nozzles ....................................................................... Page 134 • Commonly used for herbicide, insecticide, and fungicides – Most effective with a tapered fan, designed for spray overlap, ensuring uniformity Broadcast Wide-Angle Spray Nozzles..................................................... Page 160 • Commonly used with fertilizers and specialty applications – Wide spray pattern will overlap with adjacent patterns and improve uniformity Streaming Spray Nozzles........................................................................ Page 166 • Commonly used for fertilizer applications – Single streams are good for heavy crop residues and tilled fields. – Multiple streams are good for crops like wheat, where minimal plant burn is required Banding & Directed Spray Nozzles ......................................................... Page 172 • Used for various applications including agricultural spraying and orchard/vineyard spraying – Even spray nozzles are designed to eliminate spray pattern overlap; used for spraying between crop rows or specific targeted areas Specialty Spray Nozzles.......................................................................... Page 188 • Includes boomless nozzles, car wash/pressure cleaning nozzles, specialty crops, acid-resistant nozzles for harsh defoliants, misting nozzles, and more 129 Selecting the Right Spray Nozzle Visit sprayit.hypropumps.com for Hypro's online nozzle calculator or download the FREE SprayIT app for Apple or Android devices. Spray nozzles are often the smallest and most overlooked piece of equipment on a machine. However, they have the greatest effect on the accuracy and efficiency of each application. Hypro offers spray nozzles for a variety of pressure ranges, flow rates and spray patterns to fit any spray application. To be effective, a pesticide must be applied properly. To select the correct spray nozzle for the job, first fully read the pesticide label and look for information on nozzle type, application rate, spray quality, and environmental restrictions. Then… 1) Check which type of spraying technique you will be using – broadcast or banding. (pg 130) 2) Check your sprayer speed. (pg 130) 3) Select the application rate from the pesticide label. (pg 130) 4) Determine the flow rate (GPM) needed for the spray nozzle, or use the application rate (GPA) chart for the desired nozzle. (pg 130) 5) Select the pattern type and nozzle technology. (pg 131) 6) Select nozzle size and pressure that provides the desired flow rate and application rate. (pg 131) 7) Check the spray quality tables to be sure the spray nozzle and pressure create the droplet spectrum you require. (pg 132) 1) Spraying Technique: Broadcast spraying is when the entire field is to be treated. The width that each nozzle sprays, adjusted for spray overlap, is the distance between nozzles on the spray boom. Band spraying is when planted rows or unplanted gaps are treated. The width that each nozzle sprays is the width of the treated band. 2) Sprayer Speed: Forward speed of the spraying machine should be measured accurately. Radar or ultrasound speed sensors should be calibrated after installation or servicing. Wheel-driven speedometers should be calibrated whenever the driving surface changes, such as after cultivation. Speed can be determined if it is known how long it takes to drive a measured distance: distance (m) x 3.6 distance (feet) x 60 or speed in Kmph = speed in MPH = time (seconds) time (seconds) x 88 Improved vehicle design means that speeds up to 20 MPH are now possible. Higher speeds (10-20 MPH) improve work rates and timeliness; lower speeds (5-10 MPH) give improved canopy penetration and make spray drift control simpler. 3) Application Rate: Read the pesticide label closely to determine an appropriate spray application rate. If a range of acceptable application rates is listed, choose a rate that best matches your situation. 4) Flow Rate: Determine the exact flow required from each nozzle by calculating: GPM = GPA x MPH x w 5,940 LPM = or ‘W’ changes depending on the type of applications: -Nozzle spacing (in/m) for broadcast spraying -Spray width (in/m) for single-nozzle band spraying or boomless spraying -Row spacing (in/m) divided by the number of nozzles per row for directed spraying Or you can read the application tables throughout this guide. 130 L/ha x Kmph x w 600 5) Spray Pattern Type: Flat Fan pattern – Available as a tapered spray for boom applications or an even spray for single nozzle applications. Even spray nozzles produce a narrow pattern, where spray is evenly deposited across the spray’s width. Tapered spray nozzles produce an elliptical spray pattern where more of the spray is deposited immediately under the nozzle. By overlapping tapered sprays, an even distribution across the entire boom can be obtained. Even Tapered Deflect pattern – Also known as anvil or flood nozzles, deflect nozzles produce a wide-angled flat pattern when operated at low pressures (10-40 PSI/1-3 BAR), The nozzles generally produce a coarse, even spray. Deflect/Anvil/Flood Cone pattern – These spray nozzles produce either a soild circular (full cone nozzles) or a hollow circular footprint (hollow cone nozzles). Full cones are ideal for spot spraying, whereas hollow cones are used on air-assisted sprayers and directed sprays. Full Cone Hollow Cone Other patterns – Specialty sprays call for specialty patterns, such as off-center or streaming sprays. An off-center pattern is used to extend spray patterns past the boom structure and streaming patterns are commonly used for fertilizer applications. Off- Center Streaming Nozzle Technology: Standard Hydraulic (Total Range-TR) Pre-Orifice (Guardian-GRD) Air Induction (GuardianAIR Twin-GAT) Flow Flow Orifice & Pattern Creation • Pro - Low Cost • Con - Increased drift potential Flow Air Orifice Induction Orifice Pattern Creation • Pro - Reduced drift potential • Con - Multiple pieces to clean Pattern Creation • Pro - Increased coverage and Reduced Drift • Con - Reduced performance with thick suspension based solutions 6) Nozzle Size and Pressure: Use the flow rate tables provided throughout this guide to select the nozzle and pressure that provides the flow needed for the application. 131 SELECTING THE RIGHT SPRAY NOZZLE Selecting the Right Spray Nozzle Selecting the Right Spray Nozzle 7) Spray Quality: The size and the variation of droplets determine the spray quality that a nozzle produces. To apply a spray solution safely and with the most agronomic value, it must be delivered with the appropriate droplet size spectrum. ASABE S 572.1 Droplet Size Classification The American Society of Agricultural and Biological Engineers (ASABE) developed the ASABE S572.1 standard to measure and interpret spray quality from nozzles. Spray Quality* Size of Droplets VMD Range (Microns**) Color Code Retention on Difficult to Wet Leaves Drift Potential Extremely Fine Small <60 Purple Excellent High Very Fine 61-105 Red Excellent Fine 106-235 Orange Very Good Medium 236-340 Yellow Good Coarse 341-403 Blue Moderate Very Coarse 404-502 Green Poor Extremely Coarse 503-665 White Very Poor >665 Black Very Poor Ultra Coarse Large Low *Always read the pesticide label to determine which spray quality is required. ** Estimated from sample reference graph in ASABE/ANSI/ASAE Standard S572.1. The ASABE S572.1 standard uses eight droplet classification categories, six of which are common for agriculture and horticulture: Very Fine, Fine, Medium, Coarse, Very Coarse and Extremely Coarse. Most agrochemical applications recommend a fine, medium, or coarse spray. Fine sprays provide enhanced retention for directed spraying on the target including: • Foliar-acting weed control • Contact-acting fungicides and insecticides Medium sprays are used with systemic, sprays are the most widely used Coarse spray type. residual, and soil-applied • Used by default by most applicators herbicides. when spray quality is not defined by the label. • Systemic-acting fungicides, insecticides and herbicides. BCPC Nozzle Classification The British Crop Protection Council (BCPC) develop a standard for classifying nozzle droplet size. The standard is based on relative comparisons of droplet size using a set of agreed upon reference nozzles. For conventional hydraulic nozzles, spray quality varies according to nozzle size (defined by nozzle flow in l/min) and with pressure, larger sizes and lower pressures produce larger droplets. Spray quality is defined by Volume Median Diameter (VMD) which is the mid-droplet size where half of the volume of spray is in larger and half in smaller droplets. The BCPC International Spray Classification System, groups nozzles into five categories: VERY FINE, FINE, MEDIUM, COARSE AND VERY COARSE, each category covering a range of VMDs. Air Induction (AI) nozzles incorporate air as well as fluid in the droplets. As a result they are not classified by BCPC in the same way as standard hydraulic nozzles. AI nozzles tend to have a more uniform droplets size and less of the driftable fines. Those at the finer end of the spectrum can be successfully used in place of conventional ‘medium’ spray quality whilst at the same time reducing spray drift. 132 Special Banding & Directed Stream Wide Broadcast Section The following chart has been designed to simplify selection of the correct spray nozzle type for the agrochemical to be applied. It is based on having good conditions for spraying and should be used in conjunction with the agrochemical manufacturer’s label. Increased carrier rates may allow for coarser sprays to reduce risk of drift. Always follow the agrochemical label exactly. Code Spray Nozzle Common Use Pattern Technology Orifice Material Nominal Spray Angle ULD GAT ATW GA AVI GRD LD ADI VP TR AXI VPT F HF DT APM ESI CM DC AMT DC/CR DCC/CRC HCX ATR TVI AVI AXI DCC/CRC FCX E OC OCI AVI-OC XT ACID LD TUR Ultra Lo-Drift GuardianAIR Twin Air Injected Twin Fan GuardianAIR Air Injected Anti-Drift Guardian Lo-Drift Drift Reduction Variable Pressure Total Range Wide Range Fan VPTech FanTip Hi-Flow DeflecTip Wide Angle Flood Six Stream Fanjet 0° Flow Regulating Disc Flow Regulating Disc SwirlTip Disc/Core Disc and Core HollowTip Hollow Cone Hollow Cone Hollow Cone Air Injected Anti-Drift Wide Range Fan Disc and Core Full Cone FanTip Even Flat Off-Center Flat Off-Center Ceramic Air Injected Off-Center Boom X Tender Lo-Drift Sudden Impact Weeds Plant Health Plant Health Plant Health Weeds Plant Health Plant Health Plant Health General General General General General Fertilizer Weeds & Fertilizer Weeds & Fertilizer Fertilizer Fertilizer Fertilizer Fertilizer Plant Health Plant Health Plant Health Plant Health Plant Health Plant Health Plant Health Plant Health Plant Health Weeds Unspecialized Unspecialized Weeds Weeds Acid Defoliants Car Wash Tapered Flat Fan Tapered Flat Fan Tapered Flat Fan Tapered Flat Fan Tapered Flat Fan Tapered Flat Fan Tapered Flat Fan Tapered Flat Fan Tapered Flat Fan Tapered Flat Fan Tapered Flat Fan Tapered Flat Fan Tapered Flat Fan Tapered Flat Fan Flood Flood Streams Stream Stream Stream Hollow Cone Hollow Cone Hollow Cone Hollow Cone Hollow Cone Tapered Flat Fan Tapered Flat Fan Full Cone Full Cone Even Flat Fan Off-Center Fan Off-Center Fan Off-Center Fan Boomless Fan Tapered Flat Fan 0° Rotation Air Induction Air Induction Air Induction Air Induction Air Induction Pre-Orifice Pre-Orifice Air Induction Elliptical Orifice Elliptical Orifice Elliptical Orifice Elliptical Orifice Elliptical Orifice Pre-Orifice Deflection Deflection Pre-Orifice Round Orifice Round Orifice Round Orifice Swirl Swirl Swirl Swirl Air Induction Air Induction Elliptical Orifice Swirl Swirl Elliptical Orifice Elliptical Orifice Elliptical Orifice Air Induction Pre-Orifice Pre-Orifice Turbo Polyacetal Polyacetal Ceramic Polyacetal Ceramic Polyacetal Polyacetal Ceramic Polyacetal Stainless Steel Ceramic Polyacetal Polyacetal Polyacetal Polyacetal Ceramic Ceramic or Polyacetal PVDF Polyacetal Ceramic Polyacetal Ceramic Polyacetal Ceramic Ceramic Ceramic Ceramic Ceramic Polyacetal Polyacetal Brass Ceramic Ceramic Stainless or Polyacetal PVDF Stainless or Brass UAS High Impact Car Wash Flat Fan High Pressure Ceramic HP High Pressure Car Wash Flat Fan High Pressure UAS/HP Car Wash Nozzle Kits Car Wash Flat Fan High Pressure FP CM FulcoJet FanJet Full Cone Flat Fan Fan or Hollow Cone Even Flat Fan Flood Swirl Eliptical Orfice Elliptical Orifice or Swirl Elliptical Orifice Deflection Car Wash Car Wash Cooling & MISTING F, HAF, PF, AFD, AF Humidification E Even Knapsack DT/AN Deflect Nozzle/PoliJet Knapsack S These nozzles produce streams to minimize atomization Understanding Droplet VMD Total Volume VMD VMD is the droplet size at which 50% of the spray volume is in droplets larger than the VMD and 50% of the volume is in droplets smaller than the VMD (adapted from Matthews 1992). Pressure Range PSI BAR 120° 110° 110° 110° 80°, 110° 120° 80°, 110° 110° 80°, 110° 80°, 110° 80°, 110° 80°, 110° 80°, 110° 140° 80°-160° 80°-160° 110° Equivalent 0° 0° 0° 25°-110° 13°-93° 80° 80° 80° 80° 80° 14°-71° 80° 80° 80° 80° 80° 105° 110° 24° or 30° 20-115 30-115 40-100 20-115 30-100 20-115 20-70 30-70 20-70 20-70 20-70 20-70 30-60 20-80 10-60 10-60 15-60 15-60 10-150 10-725 10-150 10-300 40-150 40-350 70-360 40-350 40-350 10-300 15-150 30-60 30-60 30-60 40-100 30-60 30-60 800-3000 1-8 2-8 3-7 1-8 2-7 1-8 1-5 2-5 1-5 1-5 1-5 1-5 2-4 1.5-6 1-4 1-4 1-4 1-4 1-10 1-50 1-10 1-20 3-10 3-24 5-25 3-24 3-24 1-20 1-10 2-4 2-4 2-4 3-7 2-5 2-4 55-207 0°, 15°, 25°, 40° 800-5000 55-345 Hardened Stainless Steel 0°, 5°, 15°, 25°, 40° 300-4000 21-276 Ceramic or Hardened Stainless Steel PVDF PVDF 0°, 5°, 15°, 25°, 40° 300-5000 10-150 30-500 .7-10 2-35 Polyacetal 65°-110° 40-150 3-10 Polyacetal Polyacetal 80° 53.-127° 15-45 15-45 1-3 1-3 Degree of Atomization Droplet Size (Microns) Fog Up to 25 Fine Mist 20-100 Fine Drizzle 100-250 Heavy Drizzle 250-500 Light Rain 500-800 Heavy Rain 800-1000 Thunderstorm Rain 1000-4000 133 Relative Size Related to Common Objects Point of a Needle (25 Microns) Human Hair (100 Microns) Sewing Thread (150 Microns) Toothbrush Bristle (300 Microns) Staple (550 Microns) Paper Clip (850 Microns) #2 Pencil Lead (2000 Microns) F M C VC XC UC S S S S 21-345 45°-80° 0°-110° Understanding Micron Size ASABE Droplet Classificcation XF VF • Droplet sizes are usually expressed in microns (micrometers). • One micron equals one thousandth of a millimeter. • Lower spraying pressures provide larger droplet sizes, while higher spraying pressures yield smaller droplet sizes. • The smallest droplet sizes are achieved by air atomizing nozzles. • Generally speaking, the largest spray droplets are produced by wide-angle, flat hydraulic spray nozzles. SELECTING THE RIGHT SPRAY NOZZLE Selecting the Right Spray Nozzle Ultra Lo-Drift 120 o The ULD – Ultra Lo-Drift is the ideal spray nozzle for use where drift reduction is paramount. The nozzle produces large air-filled droplets, which cut drift dramatically compared with a standard fan and conventional lowdrift spray nozzles. Ideal for use with pre-emergence and broad spectrum products. • Creates air-filled droplets which significantly reduce spray drift • Wide spray angle (120°) enables boom height to be lowered to further decrease drift • Small, compact size reduces the chances of accidental breakage • FastCap complete includes nozzle, cap, gasket and integrated strainers US Units Nozzle Droplet Pressure Flow Rate Size Size (PSI) (GPM) 015 02 025 03 04 05 06 08 UC XC VC VC C C C M M M UC XC C C C M M M M M XC XC C C C M M M M M XC XC C C C M M M M M UC UC UC XC XC XC VC VC C C UC UC XC XC XC VC VC VC C C UC UC XC XC VC C C C C M UC XC VC VC C C C M M M 20 30 40 50 60 70 80 90 100 115 20 30 40 50 60 70 80 90 100 115 20 30 40 50 60 70 80 90 100 115 20 30 40 50 60 70 80 90 100 115 20 30 40 50 60 70 80 90 100 115 20 30 40 50 60 70 80 90 100 115 20 30 40 50 60 70 80 90 100 115 20 30 40 50 60 70 80 90 100 115 0.11 0.13 0.15 0.17 0.18 0.20 0.21 0.23 0.24 0.25 0.14 0.17 0.20 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.18 0.22 0.25 0.28 0.31 0.33 0.35 0.38 0.40 0.42 0.21 0.26 0.30 0.34 0.37 0.40 0.42 0.45 0.47 0.51 0.28 0.35 0.40 0.45 0.49 0.53 0.57 0.60 0.63 0.68 0.35 0.43 0.50 0.56 0.61 0.66 0.71 0.75 0.79 0.85 0.42 0.52 0.60 0.67 0.73 0.79 0.85 0.90 0.95 1.02 0.57 0.69 0.80 0.89 0.98 1.06 1.13 1.20 1.26 1.36 4 8.2 9.7 11.1 12.6 13.4 14.9 15.6 17.1 17.8 18.6 10.4 12.6 14.9 16.3 17.8 19.3 20.8 22.3 23.8 25.2 13.4 16.3 18.6 20.8 23.0 24.5 26.0 28.2 29.7 31.2 15.6 19.3 22.3 25.2 27.5 29.7 31.2 33.4 34.9 37.9 20.8 26.0 29.7 33.4 36.4 39.4 42.3 44.6 46.8 50.5 26.0 31.9 37.1 41.6 45.3 49.0 52.7 55.7 58.7 63.1 31.2 38.6 44.6 49.7 54.2 58.7 63.1 66.8 70.5 75.7 42.3 51.2 59.4 66.1 72.8 78.7 83.9 89.1 93.6 101 Droplet size based on ASABE S572.1 standard 5 6.5 7.7 8.9 10.1 10.7 11.9 12.5 13.7 14.3 14.9 8.3 10.1 11.9 13.1 14.3 15.4 16.6 17.8 19.0 20.2 10.7 13.1 14.9 16.6 18.4 19.6 20.8 22.6 23.8 24.9 12.5 15.4 17.8 20.2 22.0 23.8 24.9 26.7 27.9 30.3 16.6 20.8 23.8 26.7 29.1 31.5 33.9 35.6 37.4 40.4 20.8 25.5 29.7 33.3 36.2 39.2 42.2 44.6 46.9 50.5 24.9 30.9 35.6 39.8 43.4 46.9 50.5 53.5 56.4 60.6 33.9 41.0 47.5 52.9 58.2 63.0 67.1 71.3 74.8 80.8 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 5.4 6.4 7.4 8.4 8.9 9.9 10.4 11.4 11.9 12.4 6.9 8.4 9.9 10.9 11.9 12.9 13.9 14.9 15.8 16.8 8.9 10.9 12.4 13.9 15.3 16.3 17.3 18.8 19.8 20.8 10.4 12.9 14.9 16.8 18.3 19.8 20.8 22.3 23.3 25.2 13.9 17.3 19.8 22.3 24.3 26.2 28.2 29.7 31.2 33.7 17.3 21.3 24.8 27.7 30.2 32.7 35.1 37.1 39.1 42.1 20.8 25.7 29.7 33.2 36.1 39.1 42.1 44.6 47.0 50.5 28.2 34.2 39.6 44.1 48.5 52.5 55.9 59.4 62.4 67.3 4.1 4.8 5.6 6.3 6.7 7.4 7.8 8.5 8.9 9.3 5.2 6.3 7.4 8.2 8.9 9.7 10.4 11.1 11.9 12.6 6.7 8.2 9.3 10.4 11.5 12.3 13.0 14.1 14.9 15.6 7.8 9.7 11.1 12.6 13.7 14.9 15.6 16.7 17.4 18.9 10.4 13.0 14.9 16.7 18.2 19.7 21.2 22.3 23.4 25.2 13.0 16.0 18.6 20.8 22.6 24.5 26.4 27.8 29.3 31.6 15.6 19.3 22.3 24.9 27.1 29.3 31.6 33.4 35.3 37.9 21.2 25.6 29.7 33.0 36.4 39.4 42.0 44.6 46.8 50.5 3.3 3.9 4.5 5.0 5.3 5.9 6.2 6.8 7.1 7.4 4.2 5.0 5.9 6.5 7.1 7.7 8.3 8.9 9.5 10.1 5.3 6.5 7.4 8.3 9.2 9.8 10.4 11.3 11.9 12.5 6.2 7.7 8.9 10.1 11.0 11.9 12.5 13.4 14.0 15.1 8.3 10.4 11.9 13.4 14.6 15.7 16.9 17.8 18.7 20.2 10.4 12.8 14.9 16.6 18.1 19.6 21.1 22.3 23.5 25.2 12.5 15.4 17.8 19.9 21.7 23.5 25.2 26.7 28.2 30.3 16.9 20.5 23.8 26.4 29.1 31.5 33.6 35.6 37.4 40.4 2.7 3.2 3.7 4.2 4.5 5.0 5.2 5.7 5.9 6.2 3.5 4.2 5.0 5.4 5.9 6.4 6.9 7.4 7.9 8.4 4.5 5.4 6.2 6.9 7.7 8.2 8.7 9.4 9.9 10.4 5.2 6.4 7.4 8.4 9.2 9.9 10.4 11.1 11.6 12.6 6.9 8.7 9.9 11.1 12.1 13.1 14.1 14.9 15.6 16.8 8.7 10.6 12.4 13.9 15.1 16.3 17.6 18.6 19.6 21.0 10.4 12.9 14.9 16.6 18.1 19.6 21.0 22.3 23.5 25.2 14.1 17.1 19.8 22.0 24.3 26.2 28.0 29.7 31.2 33.7 GAL/1000 Ft 20 inch nozzle spacing 3 4 2 15 2.2 2.6 3.0 3.4 3.6 4.0 4.2 4.6 4.8 5.0 2.8 3.4 4.0 4.4 4.8 5.1 5.5 5.9 6.3 6.7 3.6 4.4 5.0 5.5 6.1 6.5 6.9 7.5 7.9 8.3 4.2 5.1 5.9 6.7 7.3 7.9 8.3 8.9 9.3 10.1 5.5 6.9 7.9 8.9 9.7 10.5 11.3 11.9 12.5 13.5 6.9 8.5 9.9 11.1 12.1 13.1 14.1 14.9 15.6 16.8 8.3 10.3 11.9 13.3 14.5 15.6 16.8 17.8 18.8 20.2 11.3 13.7 15.8 17.6 19.4 21.0 22.4 23.8 24.9 26.9 134 20 1.6 1.9 2.2 2.5 2.7 3.0 3.1 3.4 3.6 3.7 2.1 2.5 3.0 3.3 3.6 3.9 4.2 4.5 4.8 5.0 2.7 3.3 3.7 4.2 4.6 4.9 5.2 5.6 5.9 6.2 3.1 3.9 4.5 5.0 5.5 5.9 6.2 6.7 7.0 7.6 4.2 5.2 5.9 6.7 7.3 7.9 8.5 8.9 9.4 10.1 5.2 6.4 7.4 8.3 9.1 9.8 10.5 11.1 11.7 12.6 6.2 7.7 8.9 9.9 10.8 11.7 12.6 13.4 14.1 15.1 8.5 10.2 11.9 13.2 14.6 15.7 16.8 17.8 18.7 20.2 2 0.38 0.44 0.51 0.58 0.61 0.68 0.72 0.78 0.82 0.85 0.48 0.58 0.68 0.75 0.82 0.89 0.95 1.02 1.09 1.16 0.61 0.75 0.85 0.95 1.06 1.13 1.19 1.30 1.36 1.43 0.72 0.89 1.02 1.16 1.26 1.36 1.43 1.53 1.60 1.74 0.95 1.19 1.36 1.53 1.67 1.81 1.94 2.05 2.15 2.32 1.19 1.47 1.71 1.91 2.08 2.25 2.42 2.56 2.69 2.90 1.43 1.77 2.05 2.28 2.49 2.69 2.90 3.07 3.24 3.48 1.94 2.35 2.73 3.03 3.34 3.61 3.85 4.09 4.30 4.64 0.25 0.30 0.34 0.39 0.41 0.45 0.48 0.52 0.55 0.57 0.32 0.39 0.45 0.50 0.55 0.59 0.64 0.68 0.73 0.77 0.41 0.50 0.57 0.64 0.70 0.75 0.80 0.86 0.91 0.95 0.48 0.59 0.68 0.77 0.84 0.91 0.95 1.02 1.07 1.16 0.64 0.80 0.91 1.02 1.11 1.20 1.30 1.36 1.43 1.55 0.80 0.98 1.14 1.27 1.39 1.50 1.61 1.71 1.80 1.93 0.95 1.18 1.36 1.52 1.66 1.80 1.93 2.05 2.16 2.32 1.30 1.57 1.82 2.02 2.23 2.41 2.57 2.73 2.86 3.09 0.19 0.22 0.26 0.29 0.31 0.34 0.36 0.39 0.41 0.43 0.24 0.29 0.34 0.38 0.41 0.44 0.48 0.51 0.55 0.58 0.31 0.38 0.43 0.48 0.53 0.56 0.60 0.65 0.68 0.72 0.36 0.44 0.51 0.58 0.63 0.68 0.72 0.77 0.80 0.87 0.48 0.60 0.68 0.77 0.84 0.90 0.97 1.02 1.07 1.16 0.60 0.73 0.85 0.95 1.04 1.13 1.21 1.28 1.35 1.45 0.72 0.89 1.02 1.14 1.24 1.35 1.45 1.53 1.62 1.74 0.97 1.18 1.36 1.52 1.67 1.81 1.93 2.05 2.15 2.32 5 0.15 0.18 0.20 0.23 0.25 0.27 0.29 0.31 0.33 0.34 0.19 0.23 0.27 0.30 0.33 0.35 0.38 0.41 0.44 0.46 0.25 0.30 0.34 0.38 0.42 0.45 0.48 0.52 0.55 0.57 0.29 0.35 0.41 0.46 0.50 0.55 0.57 0.61 0.64 0.70 0.38 0.48 0.55 0.61 0.67 0.72 0.78 0.82 0.86 0.93 0.48 0.59 0.68 0.76 0.83 0.90 0.97 1.02 1.08 1.16 0.57 0.71 0.82 0.91 1.00 1.08 1.16 1.23 1.30 1.39 0.78 0.94 1.09 1.21 1.34 1.45 1.54 1.64 1.72 1.86 3 1 2 1. Twin inlet; Air Induction Technology 2. Available in a Fastcap option for easy installation 3. Configured with or without a filter BROADCAST SPRAY NOZZLES See www.hyprospraytips.com/certifications for the latest drift reduction standard information. Maximum drift control in a 120° wide spray pattern for even coverage in broadcast applications Metric Units Metric Units Nozzle Droplet Pressure Size Size (BAR) Flow Rate (LPM) 7 UC 1 0,35 60 UC 1,5 0,42 72 XC 2 0,49 84 VC 3 0,60 103 C 4 0,69 118 015 C 5 0,77 132 M 6 0,85 146 M 7 0,92 158 M 8 0,98 168 UC 1 0,46 79 UC 1,5 0,57 98 XC 2 0,65 111 C 3 0,80 137 C 4 0,92 158 02 M 5 1,03 177 M 6 1,13 194 M 7 1,22 209 M 8 1,31 225 UC 1 0,58 99 XC 1,5 0,71 122 XC 2 0,82 141 C 3 1,00 171 C 4 1,15 197 025 M 5 1,29 221 M 6 1,41 242 M 7 1,53 262 M 8 1,63 279 UC 1 0,69 118 XC 1,5 0,85 146 XC 2 0,98 168 C 3 1,20 206 C 4 1,39 238 03 M 5 1,55 266 M 6 1,70 291 M 7 1,83 314 M 8 1,96 336 UC 1 0,92 158 UC 1,5 1,13 194 UC 2 1,31 225 UC 3 1,60 274 04 XC 4 1,85 317 XC 5 2,07 355 VC 6 2,26 387 C 7 2,44 418 C 8 2,61 447 UC 1 1,15 197 UC 1,5 1,41 242 UC 2 1,63 279 XC 3 2,00 343 XC 4 2,31 396 05 VC 5 2,58 442 VC 6 2,83 485 C 7 3,06 525 C 8 3,27 561 UC 1 1,39 238 UC 1,5 1,70 291 UC 2 1,96 336 XC 3 2,40 411 VC 4 2,77 475 06 C 5 3,10 531 C 6 3,39 581 C 7 3,67 629 M 8 3,92 672 UC 1 1,85 317 UC 1,5 2,26 387 XC 2 2,61 447 VC 3 3,20 549 08 C 4 3,70 634 C 5 4,13 708 M 6 4,53 777 M 7 4,89 838 M 8 5,23 897 Droplet size based on ASABE S572.1 standard 8 53 63 74 90 104 116 128 138 147 69 86 98 120 138 155 170 183 197 87 107 123 150 173 194 212 230 245 104 128 147 180 209 233 255 275 294 138 170 197 240 278 311 339 366 392 173 212 245 300 347 387 425 459 491 209 255 294 360 416 465 509 551 588 278 339 392 480 555 620 680 734 785 Unique 60° thick spray pattern for a wider coverage area. 120° wide by 60° thick pattern. Application Rate L/Ha - 50cm spacing KM/H 10 12 15 20 42 50 59 72 83 92 102 110 118 55 68 78 96 110 124 136 146 157 70 85 98 120 138 155 169 184 196 83 102 118 144 167 186 204 220 235 110 136 157 192 222 248 271 293 313 138 169 196 240 277 310 340 367 392 167 204 235 288 332 372 407 440 470 222 271 313 384 444 496 544 587 628 35 42 49 60 69 77 85 92 98 46 57 65 80 92 103 113 122 131 58 71 82 100 115 129 141 153 163 69 85 98 120 139 155 170 183 196 92 113 131 160 185 207 226 244 261 115 141 163 200 231 258 283 306 327 139 170 196 240 277 310 339 367 392 185 226 261 320 370 413 453 489 523 28 34 39 48 55 62 68 74 78 37 46 52 64 74 82 90 98 105 46 57 66 80 92 103 113 122 130 55 68 78 96 111 124 136 146 157 74 90 105 128 148 166 181 195 209 92 113 130 160 185 206 226 245 262 111 136 157 192 222 248 271 294 314 148 181 209 256 296 330 362 391 418 21 25 29 36 41 46 51 55 59 28 34 39 48 55 62 68 73 79 35 43 49 60 69 77 85 92 98 41 51 59 72 83 93 102 110 118 55 68 79 96 111 124 136 146 157 69 85 98 120 139 155 170 184 196 83 102 118 144 166 186 203 220 235 111 136 157 192 222 248 272 293 314 25 17 20 24 29 33 37 41 44 47 22 27 31 38 44 49 54 59 63 28 34 39 48 55 62 68 73 78 33 41 47 58 67 74 82 88 94 44 54 63 77 89 99 108 117 125 55 68 78 96 111 124 136 147 157 67 82 94 115 133 149 163 176 188 89 108 125 154 178 198 217 235 251 135 30 14 17 20 24 28 31 34 37 39 18 23 26 32 37 41 45 49 52 23 28 33 40 46 52 56 61 65 28 34 39 48 56 62 68 73 78 37 45 52 64 74 83 90 98 104 46 56 65 80 92 103 113 122 131 56 68 78 96 111 124 136 147 157 74 90 104 128 148 165 181 196 209 Drift Reduction Standards JKI Features Common Use Weeds Pattern Tapered Flat Fan Technology Air Induction Material Polyacetal Spray Angle 120º Pressure Range 20-115 PSI (1-8 BAR) Configuration Nozzles, FastCap Complete Optimum Boom Height 15" (35 cm) Spacing 13" (33 cm) 20" (50 cm) Spacing 18" (46 cm) Part Numbers 50% 2.5-8.0 BAR Ref # G-1778 Nozzles 120º FastCap 120º ULD120-015 FC-ULD120-015* ULD120-02 FC-ULD120-02* ULD120-025 FC-ULD120-025* 90% 2.5-3.0 BAR ULD120-03 FC-ULD120-03* ULD120-04 FC-ULD120-04* 75% 3.1-8.0 BAR ULD120-05 FC-ULD120-05* ULD120-06 FC-ULD120-06* ULD120-08 FC-ULD120-08* Ref # G-1779 90% 2.5-8.0 BAR Ref # G-1780 Replacement Strainers TS01-100 100 mesh strainer TS01-50 50 mesh strainer Replacement FastCap Gasket 1700-0255 * FastCap version contain nozzle filters GuardianAIR Twin 110 o GuardianAIR Twin spray nozzles are the best choice for high coverage applications where on-target spray delivery is important. They are ideal for low crops with complex canopies, such as vegetables, where thorough coverage of the target and protection of the surroundings are of high importance. • High-coverage forward and rear facing fans help penetrate complex canopies • Engineered to provide better coverage with more drops per gallon or litre compared to other air-induced sprays • Easy-to-install, patent-pending locking ring and o-ring seal design • FastCap complete includes nozzle, cap, gasket and is available with or without a filter US Units Nozzle Droplet Pressure Flow Rate Size Size (PSI) (GPM) 4 C 30 0.17 12.6 M 40 0.20 14.9 M 50 0.22 16.3 M 60 0.24 17.8 M 70 0.26 19.3 02 M 80 0.28 20.8 M 90 0.30 22.3 F 100 0.32 23.8 115 0.34 25.2 F UC 30 0.22 16.3 40 0.25 18.6 VC C 50 0.28 20.8 M 60 0.31 23.0 M 70 0.33 24.5 025 M 80 0.35 26.0 M 90 0.38 28.2 M 100 0.40 29.7 M 115 0.42 31.2 VC 30 0.26 19.3 C 40 0.30 22.3 M 50 0.34 25.2 M 60 0.37 27.5 M 70 0.40 29.7 03 M 80 0.42 31.2 M 90 0.45 33.4 M 100 0.47 34.9 115 0.51 37.9 M XC 30 0.30 22.3 C 40 0.35 26.0 C 50 0.39 29.0 M 60 0.43 31.9 M 70 0.46 34.2 035 M 80 0.49 36.4 M 90 0.53 39.4 M 100 0.55 40.8 M 43.8 115 0.59 VC 30 0.35 26.0 C 40 0.40 29.7 C 50 0.45 33.4 M 60 0.49 36.4 M 70 0.53 39.4 04 M 80 0.57 42.3 M 90 0.60 44.6 M 100 0.63 46.8 M 115 0.68 50.5 VC 30 0.43 31.9 C 40 0.50 37.1 C 50 0.56 41.6 M 60 0.61 45.3 M 70 0.66 49.0 05 M 80 0.71 52.7 M 90 0.75 55.7 M 100 0.79 58.7 115 0.85 63.1 M XC 30 0.52 38.6 C 40 0.60 44.6 C 50 0.67 49.7 C 60 0.73 54.2 M 70 0.79 58.7 06 M 80 0.85 63.1 M 90 0.90 66.8 M 100 0.95 70.5 M 115 1.02 75.7 VC 30 0.69 51.2 C 40 0.80 59.4 C 50 0.89 66.1 C 60 0.98 72.8 M 70 1.06 78.7 08 M 80 1.13 83.9 M 90 1.20 89.1 M 100 1.26 93.6 M 115 1.36 101 Droplet size based on ASABE S572.1 standard. 5 10.1 11.9 13.1 14.3 15.4 16.6 17.8 19.0 20.2 13.1 14.9 16.6 18.4 19.6 20.8 22.6 23.8 24.9 15.4 17.8 20.2 22.0 23.8 24.9 26.7 27.9 30.3 17.8 20.8 23.2 25.5 27.3 29.1 31.5 32.7 35.0 20.8 23.8 26.7 29.1 31.5 33.9 35.6 37.4 40.4 25.5 29.7 33.3 36.2 39.2 42.2 44.6 46.9 50.5 30.9 35.6 39.8 43.4 46.9 50.5 53.5 56.4 60.6 41.0 47.5 52.9 58.2 63.0 67.1 71.3 74.8 80.8 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 8.4 9.9 10.9 11.9 12.9 13.9 14.9 15.8 16.8 10.9 12.4 13.9 15.3 16.3 17.3 18.8 19.8 20.8 12.9 14.9 16.8 18.3 19.8 20.8 22.3 23.3 25.2 14.9 17.3 19.3 21.3 22.8 24.3 26.2 27.2 29.2 17.3 19.8 22.3 24.3 26.2 28.2 29.7 31.2 33.7 21.3 24.8 27.7 30.2 32.7 35.1 37.1 39.1 42.1 25.7 29.7 33.2 36.1 39.1 42.1 44.6 47.0 50.5 34.2 39.6 44.1 48.5 52.5 55.9 59.4 62.4 67.3 6.3 7.4 8.2 8.9 9.7 10.4 11.1 11.9 12.6 8.2 9.3 10.4 11.5 12.3 13.0 14.1 14.9 15.6 9.7 11.1 12.6 13.7 14.9 15.6 16.7 17.4 18.9 11.1 13.0 14.5 16.0 17.1 18.2 19.7 20.4 21.9 13.0 14.9 16.7 18.2 19.7 21.2 22.3 23.4 25.2 16.0 18.6 20.8 22.6 24.5 26.4 27.8 29.3 31.6 19.3 22.3 24.9 27.1 29.3 31.6 33.4 35.3 37.9 25.6 29.7 33.0 36.4 39.4 42.0 44.6 46.8 50.5 5.0 5.9 6.5 7.1 7.7 8.3 8.9 9.5 10.1 6.5 7.4 8.3 9.2 9.8 10.4 11.3 11.9 12.5 7.7 8.9 10.1 11.0 11.9 12.5 13.4 14.0 15.1 8.9 10.4 11.6 12.8 13.7 14.6 15.7 16.3 17.5 10.4 11.9 13.4 14.6 15.7 16.9 17.8 18.7 20.2 12.8 14.9 16.6 18.1 19.6 21.1 22.3 23.5 25.2 15.4 17.8 19.9 21.7 23.5 25.2 26.7 28.2 30.3 20.5 23.8 26.4 29.1 31.5 33.6 35.6 37.4 40.4 4.2 5.0 5.4 5.9 6.4 6.9 7.4 7.9 8.4 5.4 6.2 6.9 7.7 8.2 8.7 9.4 9.9 10.4 6.4 7.4 8.4 9.2 9.9 10.4 11.1 11.6 12.6 7.4 8.7 9.7 10.6 11.4 12.1 13.1 13.6 14.6 8.7 9.9 11.1 12.1 13.1 14.1 14.9 15.6 16.8 10.6 12.4 13.9 15.1 16.3 17.6 18.6 19.6 21.0 12.9 14.9 16.6 18.1 19.6 21.0 22.3 23.5 25.2 17.1 19.8 22.0 24.3 26.2 28.0 29.7 31.2 33.7 GAL/1000Ft 15 3.4 4.0 4.4 4.8 5.1 5.5 5.9 6.3 6.7 4.4 5.0 5.5 6.1 6.5 6.9 7.5 7.9 8.3 5.1 5.9 6.7 7.3 7.9 8.3 8.9 9.3 10.1 5.9 6.9 7.7 8.5 9.1 9.7 10.5 10.9 11.7 6.9 7.9 8.9 9.7 10.5 11.3 11.9 12.5 13.5 8.5 9.9 11.1 12.1 13.1 14.1 14.9 15.6 16.8 10.3 11.9 13.3 14.5 15.6 16.8 17.8 18.8 20.2 13.7 15.8 17.6 19.4 21.0 22.4 23.8 24.9 26.9 136 20 2.5 3.0 3.3 3.6 3.9 4.2 4.5 4.8 5.0 3.3 3.7 4.2 4.6 4.9 5.2 5.6 5.9 6.2 3.9 4.5 5.0 5.5 5.9 6.2 6.7 7.0 7.6 4.5 5.2 5.8 6.4 6.8 7.3 7.9 8.2 8.8 5.2 5.9 6.7 7.3 7.9 8.5 8.9 9.4 10.1 6.4 7.4 8.3 9.1 9.8 10.5 11.1 11.7 12.6 7.7 8.9 9.9 10.8 11.7 12.6 13.4 14.1 15.1 10.2 11.9 13.2 14.6 15.7 16.8 17.8 18.7 20.2 2 0.58 0.68 0.75 0.82 0.89 0.95 1.02 1.09 1.16 0.75 0.85 0.95 1.06 1.13 1.19 1.30 1.36 1.43 0.89 1.02 1.16 1.26 1.36 1.43 1.53 1.60 1.74 1.02 1.19 1.33 1.47 1.57 1.67 1.81 1.88 2.01 1.19 1.36 1.53 1.67 1.81 1.94 2.05 2.15 2.32 1.47 1.71 1.91 2.08 2.25 2.42 2.56 2.69 2.90 1.77 2.05 2.28 2.49 2.69 2.90 3.07 3.24 3.48 2.35 2.73 3.03 3.34 3.61 3.85 4.09 4.30 4.64 2 20 inch nozzle spacing 3 0.39 0.45 0.50 0.55 0.59 0.64 0.68 0.73 0.77 0.50 0.57 0.64 0.70 0.75 0.80 0.86 0.91 0.95 0.59 0.68 0.77 0.84 0.91 0.95 1.02 1.07 1.16 0.68 0.80 0.89 0.98 1.05 1.11 1.20 1.25 1.34 0.80 0.91 1.02 1.11 1.20 1.30 1.36 1.43 1.55 0.98 1.14 1.27 1.39 1.50 1.61 1.71 1.80 1.93 1.18 1.36 1.52 1.66 1.80 1.93 2.05 2.16 2.32 1.57 1.82 2.02 2.23 2.41 2.57 2.73 2.86 3.09 4 0.29 0.34 0.38 0.41 0.44 0.48 0.51 0.55 0.58 0.38 0.43 0.48 0.53 0.56 0.60 0.65 0.68 0.72 0.44 0.51 0.58 0.63 0.68 0.72 0.77 0.80 0.87 0.51 0.60 0.66 0.73 0.78 0.84 0.90 0.94 1.01 0.60 0.68 0.77 0.84 0.90 0.97 1.02 1.07 1.16 0.73 0.85 0.95 1.04 1.13 1.21 1.28 1.35 1.45 0.89 1.02 1.14 1.24 1.35 1.45 1.53 1.62 1.74 1.18 1.36 1.52 1.67 1.81 1.93 2.05 2.15 2.32 3 5 0.23 0.27 0.30 0.33 0.35 0.38 0.41 0.44 0.46 0.30 0.34 0.38 0.42 0.45 0.48 0.52 0.55 0.57 0.35 0.41 0.46 0.50 0.55 0.57 0.61 0.64 0.70 0.41 0.48 0.53 0.59 0.63 0.67 0.72 0.75 0.80 0.48 0.55 0.61 0.67 0.72 0.78 0.82 0.86 0.93 0.59 0.68 0.76 0.83 0.90 0.97 1.02 1.08 1.16 0.71 0.82 0.91 1.00 1.08 1.16 1.23 1.30 1.39 0.94 1.09 1.21 1.34 1.45 1.54 1.64 1.72 1.86 1 2 2 1. Integrated Locking Collar allows for precise and easy installation 2. Twin Air Inducted spray patterns (30° offset) for superior coverage 3. Available with or without filter options BROADCAST SPRAY NOZZLES Z.N.T. See www.hyprospraytips.com/certifications for the latest drift reduction standard information. 110° air inducted spray pattern for class leading coverage on a variety of targets. Metric Units Nozzle Droplet Pressure Flow Rate Size Size (BAR) (LPM) 7 C 2 0,65 111 M 3 0,80 137 M 4 0,92 158 M 5 1,03 177 02 M 6 1,13 194 F 7 1,22 209 8 1,31 225 F UC 2 0,82 141 VC 3 1,00 171 M 4 1,15 197 M 5 1,29 221 025 M 6 1,41 242 M 7 1,53 262 M 8 1,63 279 VC 2 0,98 168 C 3 1,20 206 M 4 1,39 238 M 5 1,55 266 03 M 6 1,70 291 M 7 1,83 314 8 1,96 336 M XC 2 1,14 195 C 3 1,40 240 M 4 1,62 278 M 5 1,81 310 035 M 6 1,98 339 M 7 2,14 367 M 8 2,29 393 VC 2 1,31 225 C 3 1,60 274 M 4 1,85 317 M 5 2,07 355 04 M 6 2,26 387 M 7 2,44 418 M 8 2,61 447 VC 2 1,63 279 C 3 2,00 343 M 4 2,31 396 M 5 2,58 442 05 M 6 2,83 485 M 7 3,06 525 8 3,27 561 M XC 2 1,96 336 C 3 2,40 411 C 4 2,77 475 M 5 3,10 531 06 M 6 3,39 581 M 7 3,67 629 M 8 3,92 672 VC 2 2,61 447 C 3 3,20 549 C 4 3,70 634 M 5 4,13 708 08 M 6 4,53 777 M 7 4,89 838 M 8 5,23 897 Droplet size based on ASABE S572.1 standard. Use at 3 bar for optimum coverage. Sturdy twin 30° incline/decline patterns provide superior canopy penetration through pattern integrity. Application Rate L/Ha - 50 cm Spacing KM/H 8 10 12 15 20 98 120 138 155 170 183 197 123 150 173 194 212 230 245 147 180 209 233 255 275 294 171 210 243 272 297 321 344 197 240 278 311 339 366 392 245 300 347 387 425 459 491 294 360 416 465 509 551 588 392 480 555 620 680 734 785 78 96 110 124 136 146 157 98 120 138 155 169 184 196 118 144 167 186 204 220 235 137 168 194 217 238 257 275 157 192 222 248 271 293 313 196 240 277 310 340 367 392 235 288 332 372 407 440 470 313 384 444 496 544 587 628 65 80 92 103 113 122 131 82 100 115 129 141 153 163 98 120 139 155 170 183 196 114 140 162 181 198 214 229 131 160 185 207 226 244 261 163 200 231 258 283 306 327 196 240 277 310 339 367 392 261 320 370 413 453 489 523 52 64 74 82 90 98 105 66 80 92 103 113 122 130 78 96 111 124 136 146 157 91 112 130 145 158 171 183 105 128 148 166 181 195 209 130 160 185 206 226 245 262 157 192 222 248 271 294 314 209 256 296 330 362 391 418 39 48 55 62 68 73 79 49 60 69 77 85 92 98 59 72 83 93 102 110 118 68 84 97 109 119 128 137 79 96 111 124 136 146 157 98 120 139 155 170 184 196 118 144 166 186 203 220 235 157 192 222 248 272 293 314 Features Drift Reduction Standards 25 31 38 44 49 54 59 63 39 48 55 62 68 73 78 47 58 67 74 82 88 94 55 67 78 87 95 103 110 63 77 89 99 108 117 125 78 96 111 124 136 147 157 94 115 133 149 163 176 188 125 154 178 198 217 235 251 30 26 32 37 41 45 49 52 33 40 46 52 56 61 65 39 48 56 62 68 73 78 46 56 65 72 79 86 92 52 64 74 83 90 98 104 65 80 92 103 113 122 131 78 96 111 124 136 147 157 104 128 148 165 181 196 209 137 LERAP JKI Z.N.T. Common Use Plant Health Pattern Tapered Flat Fan 66% 2.0-2.5 BAR Technology Air Induction Material Polyacetal Spray Angle 110º Pressure Range 30-115 PSI (2-8 BAR) Configuration FastCap Complete 50-75% 2.0-2.25 BAR 25-50% 2.25-2.5 BAR 50-75% 50% 2.0-2.25 BAR 2.0-2.5 BAR 66% 2.0-2.5 BAR Ref # G-1872 25-50% 2.25-2.5BAR 50-75% 50% 2.0-3.0 BAR 2.0-3.0 BAR 66% 2.0-3.0 BAR Ref # G-1874 25-50% 3.0-4.0 BAR 75% 1.5-2.0 BAR 50% 50-75% 2.0-2.5 BAR 2.1-3.0 BAR Ref # G-1988 50% 66% 2.0-2.5 BAR 25-50% 2.0-3.0 BAR 2.0-3.0 BAR Ref # G-1875 50-75% 2.0-3.0 BAR 25-50% 3.0-3.5 BAR 50% 66% 2.0-3.0 BAR 2.0-3.0 BAR Ref # G-1876 50-75% 50% 2.0-3.0 BAR 2.0-4.0 BAR 66% 2.0-3.0 BAR Ref # G-1877 25-50% 3.0-3.5 BAR 50-75% 2.0-3.0 BAR 25-50% 3.0-4.0 BAR 50% 66% 2.0-6.0 BAR 2.0-3.0 BAR Ref # G-1878 Optimum Boom Height 15" (35 cm) Spacing 13" (33 cm) 20" (50 cm) Spacing 18" (46 cm) Part Numbers FastCaps 110º with filter FastCaps 110º without filter GAT110-02 GAT110-02A GAT110-025 GAT110-025A GAT110-03 GAT110-03A GAT110-035 GAT110-035A GAT110-04 GAT110-04A GAT110-05 GAT110-05A GAT110-06 GAT110-06A GAT110-08 GAT110-08A Replacement Parts TS02-50 50 mesh strainer for all sizes 65-BS205 O-Ring 30Q3579A Replaceable cage for non-filter versions Ceramic AVI Twin 110 o The Albuz® AVI Twin (ATW) brings drift control and coverage together. Using proven AVI technology, the AVI Twin draws air into the nozzle, mixing it with the spray to create a twin spray of drift resistant air-filled droplets. Drift is greatly reduced, spraying the canopy with dual trajectories to improve coverage. • Coverage-enhancing twin patterns from a single nozzle • Drift-reducing AVI venturi technology • 60-degrees of separation between fans • Pressures from 40 to 100 psi (3-7 bar) • Wear-resistant Albuz ceramic orifices US Units Nozzle Droplet Pressure Flow Rate Size Size (PSI) (GPM) 01 015 02 03 04 05 XC XC XC C C C C XC XC XC C C C C XC XC XC C C C C XC XC XC VC VC C C XC XC XC VC VC C C XC XC XC VC VC C C 40 50 60 70 80 90 100 40 50 60 70 80 90 100 40 50 60 70 80 90 100 40 50 60 70 80 90 100 40 50 60 70 80 90 100 40 50 60 70 80 90 100 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.15 0.17 0.18 0.20 0.21 0.23 0.24 0.20 0.22 0.24 0.26 0.28 0.30 0.32 0.30 0.34 0.37 0.40 0.42 0.45 0.47 0.40 0.45 0.49 0.53 0.57 0.60 0.63 0.50 0.56 0.61 0.66 0.71 0.75 0.79 4 7.4 8.2 8.9 9.7 10.4 11.1 11.9 11.1 12.6 13.4 14.9 15.6 17.1 17.8 14.9 16.3 17.8 19.3 20.8 22.3 23.8 22.3 25.2 27.5 29.7 31.2 33.4 34.9 29.7 33.4 36.4 39.4 42.3 44.6 46.8 37.1 41.6 45.3 49.0 52.7 55.7 58.7 5 5.9 6.5 7.1 7.7 8.3 8.9 9.5 8.9 10.1 10.7 11.9 12.5 13.7 14.3 11.9 13.1 14.3 15.4 16.6 17.8 19.0 17.8 20.2 22.0 23.8 24.9 26.7 27.9 23.8 26.7 29.1 31.5 33.9 35.6 37.4 29.7 33.3 36.2 39.2 42.2 44.6 46.9 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 15 5.0 5.4 5.9 6.4 6.9 7.4 7.9 7.4 8.4 8.9 9.9 10.4 11.4 11.9 9.9 10.9 11.9 12.9 13.9 14.9 15.8 14.9 16.8 18.3 19.8 20.8 22.3 23.3 19.8 22.3 24.3 26.2 28.2 29.7 31.2 24.8 27.7 30.2 32.7 35.1 37.1 39.1 3.7 4.1 4.5 4.8 5.2 5.6 5.9 5.6 6.3 6.7 7.4 7.8 8.5 8.9 7.4 8.2 8.9 9.7 10.4 11.1 11.9 11.1 12.6 13.7 14.9 15.6 16.7 17.4 14.9 16.7 18.2 19.7 21.2 22.3 23.4 18.6 20.8 22.6 24.5 26.4 27.8 29.3 3.0 3.3 3.6 3.9 4.2 4.5 4.8 4.5 5.0 5.3 5.9 6.2 6.8 7.1 5.9 6.5 7.1 7.7 8.3 8.9 9.5 8.9 10.1 11.0 11.9 12.5 13.4 14.0 11.9 13.4 14.6 15.7 16.9 17.8 18.7 14.9 16.6 18.1 19.6 21.1 22.3 23.5 2.5 2.7 3.0 3.2 3.5 3.7 4.0 3.7 4.2 4.5 5.0 5.2 5.7 5.9 5.0 5.4 5.9 6.4 6.9 7.4 7.9 7.4 8.4 9.2 9.9 10.4 11.1 11.6 9.9 11.1 12.1 13.1 14.1 14.9 15.6 12.4 13.9 15.1 16.3 17.6 18.6 19.6 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.0 3.4 3.6 4.0 4.2 4.6 4.8 4.0 4.4 4.8 5.1 5.5 5.9 6.3 5.9 6.7 7.3 7.9 8.3 8.9 9.3 7.9 8.9 9.7 10.5 11.3 11.9 12.5 9.9 11.1 12.1 13.1 14.1 14.9 15.6 GAL/1000 Ft 20 1.5 1.6 1.8 1.9 2.1 2.2 2.4 2.2 2.5 2.7 3.0 3.1 3.4 3.6 3.0 3.3 3.6 3.9 4.2 4.5 4.8 4.5 5.0 5.5 5.9 6.2 6.7 7.0 5.9 6.7 7.3 7.9 8.5 8.9 9.4 7.4 8.3 9.1 9.8 10.5 11.1 11.7 2 0.34 0.38 0.41 0.44 0.48 0.51 0.55 0.51 0.58 0.61 0.68 0.72 0.78 0.82 0.68 0.75 0.82 0.89 0.95 1.02 1.09 1.02 1.16 1.26 1.36 1.43 1.53 1.60 1.36 1.53 1.67 1.81 1.94 2.05 2.15 1.71 1.91 2.08 2.25 2.42 2.56 2.69 2 20 inch nozzle spacing 3 0.23 0.25 0.27 0.30 0.32 0.34 0.36 0.34 0.39 0.41 0.45 0.48 0.52 0.55 0.45 0.50 0.55 0.59 0.64 0.68 0.73 0.68 0.77 0.84 0.91 0.95 1.02 1.07 0.91 1.02 1.11 1.20 1.30 1.36 1.43 1.14 1.27 1.39 1.50 1.61 1.71 1.80 4 0.17 0.19 0.20 0.22 0.24 0.26 0.27 0.26 0.29 0.31 0.34 0.36 0.39 0.41 0.34 0.38 0.41 0.44 0.48 0.51 0.55 0.51 0.58 0.63 0.68 0.72 0.77 0.80 0.68 0.77 0.84 0.90 0.97 1.02 1.07 0.85 0.95 1.04 1.13 1.21 1.28 1.35 5 0.14 0.15 0.16 0.18 0.19 0.20 0.22 0.20 0.23 0.25 0.27 0.29 0.31 0.33 0.27 0.30 0.33 0.35 0.38 0.41 0.44 0.41 0.46 0.50 0.55 0.57 0.61 0.64 0.55 0.61 0.67 0.72 0.78 0.82 0.86 0.68 0.76 0.83 0.90 0.97 1.02 1.08 Droplet size based on ASABE S572.1 standard. Albuz® is a registered trademark of SAINT-GOBAIN SOLCERA, SAINT GOBAIN CERAMIQUES AVANCEES DESMARQUEST, CERAMIQUES TECHNIQUES DESMARQUEST, and SOCIETE DESMARQUEST ET CEC.. Hypro® is a registered trademark of Pentair. 138 CENTRIFUGAL PUMPS BROADCAST SPRAY NOZZLES Metric Units Nozzle Size Droplet Size Pressure Flow 110o (bar) (L/min) 6 105 121 137 150 158 182 203 224 211 242 271 297 316 366 408 447 421 487 545 595 8 79 91 103 113 118 136 152 168 158 182 203 223 237 274 306 336 316 365 409 446 10 63 73 82 90 95 109 122 134 126 145 163 178 189 219 245 268 253 292 327 357 XC 3 2.00 526 XC 4 2.31 608 VC 5 2.58 679 2.83 745 6 C Droplet size based on ASABE S572.1 standard. 395 456 509 559 316 365 407 447 01 015 02 03 04 05 XC XC C C XC XC C C XC XC C C XC XC VC C XC XC VC C 3 4 5 6 3 4 5 6 3 4 5 6 3 4 5 6 3 4 5 6 0.40 0.46 0.52 0.57 0.60 0.69 0.77 0.85 0.80 0.92 1.03 1.13 1.20 1.39 1.55 1.70 1.60 1.85 2.07 2.26 Application Rate L/Ha- 50 cm Spacing KM/H Features 12 53 61 68 75 79 91 101 112 105 121 136 149 158 183 204 224 211 243 272 297 14 45 52 59 64 68 78 87 96 90 104 116 127 135 157 175 192 180 209 233 255 16 39 45 51 56 59 68 76 84 79 91 102 112 118 137 153 168 158 183 204 223 18 35 40 46 50 53 61 68 75 70 81 90 99 105 122 136 149 140 162 182 198 20 32 36 41 45 47 54 61 67 63 73 81 89 95 110 122 134 126 146 163 178 25 25 29 33 36 38 44 49 54 51 58 65 71 76 88 98 107 101 117 131 143 30 21 24 27 30 32 36 41 45 42 48 54 59 63 73 82 89 84 97 109 119 263 304 339 372 226 261 291 319 197 228 255 279 175 203 226 248 158 182 204 223 126 146 163 179 105 122 136 149 Common Use Plant Health Pattern Tapered Flat Fan Technology Air Induction Material Ceramic Spray Angle 110º Pressure Range 40-100 PSI (3-7 BAR) Configuration Nozzles Optimum Boom Height 80° - 15" (35 cm) Spacing 20" (51 cm) 80° - 20" (50 cm) Spacing 28" (71 cm) 110° - 15" (35 cm) Spacing 13" (33 cm) 110° - 20" (50 cm) Spacing 18" (46 cm) Part Numbers Nozzles 110º 139 Caps (25 Pack) ATW-11001 CAP01-01 ATW-110015 CAP01-015 ATW-11002 CAP01-02 ATW-11003 CAP01-03 ATW-11004 CAP01-04 ATW-11005 CAP01-05 GuardianAIR 110 o The Hypro GuardianAIR spray nozzle has a unique rearward spray incline provides more uniform coverage. Higher flow nozzles used at faster speeds have a greater spray incline. • Air-induced sprays reduce drift while increasing droplet deposition and retention on foliage • Provides better coverage with more drops per gallon or litre compared to other common air-induced spray nozzles • Speed-optimized spray incline allows more uniform coverage • Specifically engineered nozzle to maintain droplet spectrum regardless of orifice size • FastCap includes nozzle, cap and gasket US Units Nozzle Droplet Pressure Flow Rate Size Size (PSI) (GPM) 4 20 0.11 UC 8.2 XC 30 0.13 9.7 C 40 0.15 11.1 C 50 0.17 12.6 M 60 0.18 13.4 015 M 70 0.20 14.9 M 80 0.21 15.6 M 90 0.23 17.1 M 100 0.24 17.8 M 18.6 115 0.25 20 0.14 10.4 XC VC 30 0.17 12.6 M 40 0.20 14.9 M 50 0.22 16.3 M 60 0.24 17.8 02 M 70 0.26 19.3 M 80 0.28 20.8 M 90 0.30 22.3 M 100 0.32 23.8 M 25.2 115 0.34 20 0.18 XC 13.4 VC 30 0.22 16.3 C 40 0.25 18.6 M 50 0.28 20.8 M 60 0.31 23.0 025 M 70 0.33 24.5 M 80 0.35 26.0 M 90 0.38 28.2 M 100 0.40 29.7 M 31.2 115 0.42 20 0.21 UC 15.6 XC 30 0.26 19.3 VC 40 0.30 22.3 C 50 0.34 25.2 C 60 0.37 27.5 03 M 70 0.40 29.7 M 80 0.42 31.2 M 90 0.45 33.4 M 100 0.47 34.9 37.9 115 0.51 M XC 20 0.25 18.6 VC 30 0.30 22.3 C 40 0.35 26.0 M 50 0.39 29.0 M 60 0.43 31.9 035 M 70 0.46 34.2 M 80 0.49 36.4 M 90 0.53 39.4 M 100 0.55 40.8 M 43.8 115 0.59 20 0.28 XC 20.8 VC 30 0.35 26.0 C 40 0.40 29.7 C 50 0.45 33.4 M 60 0.49 36.4 04 M 70 0.53 39.4 M 80 0.57 42.3 M 90 0.60 44.6 M 100 0.63 46.8 M 50.5 115 0.68 20 0.35 XC 26.0 XC 30 0.43 31.9 C 40 0.50 37.1 C 50 0.56 41.6 C 60 0.61 45.3 05 M 70 0.66 49.0 M 80 0.71 52.7 M 90 0.75 55.7 M 100 0.79 58.7 M 63.1 115 0.85 Droplet size based on ASABE S572.1 standard. 5 6.5 7.7 8.9 10.1 10.7 11.9 12.5 13.7 14.3 14.9 8.3 10.1 11.9 13.1 14.3 15.4 16.6 17.8 19.0 20.2 10.7 13.1 14.9 16.6 18.4 19.6 20.8 22.6 23.8 24.9 12.5 15.4 17.8 20.2 22.0 23.8 24.9 26.7 27.9 30.3 14.9 17.8 20.8 23.2 25.5 27.3 29.1 31.5 32.7 35.0 16.6 20.8 23.8 26.7 29.1 31.5 33.9 35.6 37.4 40.4 20.8 25.5 29.7 33.3 36.2 39.2 42.2 44.6 46.9 50.5 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 5.4 6.4 7.4 8.4 8.9 9.9 10.4 11.4 11.9 12.4 6.9 8.4 9.9 10.9 11.9 12.9 13.9 14.9 15.8 16.8 8.9 10.9 12.4 13.9 15.3 16.3 17.3 18.8 19.8 20.8 10.4 12.9 14.9 16.8 18.3 19.8 20.8 22.3 23.3 25.2 12.4 14.9 17.3 19.3 21.3 22.8 24.3 26.2 27.2 29.2 13.9 17.3 19.8 22.3 24.3 26.2 28.2 29.7 31.2 33.7 17.3 21.3 24.8 27.7 30.2 32.7 35.1 37.1 39.1 42.1 4.1 4.8 5.6 6.3 6.7 7.4 7.8 8.5 8.9 9.3 5.2 6.3 7.4 8.2 8.9 9.7 10.4 11.1 11.9 12.6 6.7 8.2 9.3 10.4 11.5 12.3 13.0 14.1 14.9 15.6 7.8 9.7 11.1 12.6 13.7 14.9 15.6 16.7 17.4 18.9 9.3 11.1 13.0 14.5 16.0 17.1 18.2 19.7 20.4 21.9 10.4 13.0 14.9 16.7 18.2 19.7 21.2 22.3 23.4 25.2 13.0 16.0 18.6 20.8 22.6 24.5 26.4 27.8 29.3 31.6 3.3 3.9 4.5 5.0 5.3 5.9 6.2 6.8 7.1 7.4 4.2 5.0 5.9 6.5 7.1 7.7 8.3 8.9 9.5 10.1 5.3 6.5 7.4 8.3 9.2 9.8 10.4 11.3 11.9 12.5 6.2 7.7 8.9 10.1 11.0 11.9 12.5 13.4 14.0 15.1 7.4 8.9 10.4 11.6 12.8 13.7 14.6 15.7 16.3 17.5 8.3 10.4 11.9 13.4 14.6 15.7 16.9 17.8 18.7 20.2 10.4 12.8 14.9 16.6 18.1 19.6 21.1 22.3 23.5 25.2 2.7 3.2 3.7 4.2 4.5 5.0 5.2 5.7 5.9 6.2 3.5 4.2 5.0 5.4 5.9 6.4 6.9 7.4 7.9 8.4 4.5 5.4 6.2 6.9 7.7 8.2 8.7 9.4 9.9 10.4 5.2 6.4 7.4 8.4 9.2 9.9 10.4 11.1 11.6 12.6 6.2 7.4 8.7 9.7 10.6 11.4 12.1 13.1 13.6 14.6 6.9 8.7 9.9 11.1 12.1 13.1 14.1 14.9 15.6 16.8 8.7 10.6 12.4 13.9 15.1 16.3 17.6 18.6 19.6 21.0 GAL/1000 Ft 15 2.2 2.6 3.0 3.4 3.6 4.0 4.2 4.6 4.8 5.0 2.8 3.4 4.0 4.4 4.8 5.1 5.5 5.9 6.3 6.7 3.6 4.4 5.0 5.5 6.1 6.5 6.9 7.5 7.9 8.3 4.2 5.1 5.9 6.7 7.3 7.9 8.3 8.9 9.3 10.1 5.0 5.9 6.9 7.7 8.5 9.1 9.7 10.5 10.9 11.7 5.5 6.9 7.9 8.9 9.7 10.5 11.3 11.9 12.5 13.5 6.9 8.5 9.9 11.1 12.1 13.1 14.1 14.9 15.6 16.8 140 20 1.6 1.9 2.2 2.5 2.7 3.0 3.1 3.4 3.6 3.7 2.1 2.5 3.0 3.3 3.6 3.9 4.2 4.5 4.8 5.0 2.7 3.3 3.7 4.2 4.6 4.9 5.2 5.6 5.9 6.2 3.1 3.9 4.5 5.0 5.5 5.9 6.2 6.7 7.0 7.6 3.7 4.5 5.2 5.8 6.4 6.8 7.3 7.9 8.2 8.8 4.2 5.2 5.9 6.7 7.3 7.9 8.5 8.9 9.4 10.1 5.2 6.4 7.4 8.3 9.1 9.8 10.5 11.1 11.7 12.6 2 0.38 0.44 0.51 0.58 0.61 0.68 0.72 0.78 0.82 0.85 0.48 0.58 0.68 0.75 0.82 0.89 0.95 1.02 1.09 1.16 0.61 0.75 0.85 0.95 1.06 1.13 1.19 1.30 1.36 1.43 0.72 0.89 1.02 1.16 1.26 1.36 1.43 1.53 1.60 1.74 0.85 1.02 1.19 1.33 1.47 1.57 1.67 1.81 1.88 2.01 0.95 1.19 1.36 1.53 1.67 1.81 1.94 2.05 2.15 2.32 1.19 1.47 1.71 1.91 2.08 2.25 2.42 2.56 2.69 2.90 2 20 inch nozzle spacing 3 0.25 0.30 0.34 0.39 0.41 0.45 0.48 0.52 0.55 0.57 0.32 0.39 0.45 0.50 0.55 0.59 0.64 0.68 0.73 0.77 0.41 0.50 0.57 0.64 0.70 0.75 0.80 0.86 0.91 0.95 0.48 0.59 0.68 0.77 0.84 0.91 0.95 1.02 1.07 1.16 0.57 0.68 0.80 0.89 0.98 1.05 1.11 1.20 1.25 1.34 0.64 0.80 0.91 1.02 1.11 1.20 1.30 1.36 1.43 1.55 0.80 0.98 1.14 1.27 1.39 1.50 1.61 1.71 1.80 1.93 4 0.19 0.22 0.26 0.29 0.31 0.34 0.36 0.39 0.41 0.43 0.24 0.29 0.34 0.38 0.41 0.44 0.48 0.51 0.55 0.58 0.31 0.38 0.43 0.48 0.53 0.56 0.60 0.65 0.68 0.72 0.36 0.44 0.51 0.58 0.63 0.68 0.72 0.77 0.80 0.87 0.43 0.51 0.60 0.66 0.73 0.78 0.84 0.90 0.94 1.01 0.48 0.60 0.68 0.77 0.84 0.90 0.97 1.02 1.07 1.16 0.60 0.73 0.85 0.95 1.04 1.13 1.21 1.28 1.35 1.45 5 0.15 0.18 0.20 0.23 0.25 0.27 0.29 0.31 0.33 0.34 0.19 0.23 0.27 0.30 0.33 0.35 0.38 0.41 0.44 0.46 0.25 0.30 0.34 0.38 0.42 0.45 0.48 0.52 0.55 0.57 0.29 0.35 0.41 0.46 0.50 0.55 0.57 0.61 0.64 0.70 0.34 0.41 0.48 0.53 0.59 0.63 0.67 0.72 0.75 0.80 0.38 0.48 0.55 0.61 0.67 0.72 0.78 0.82 0.86 0.93 0.48 0.59 0.68 0.76 0.83 0.90 0.97 1.02 1.08 1.16 1 3 2 1. Single Inlet; Air Inducted Technology 2. Inclined spray pattern provides more uniform coverage 3. Available in a Fastcap option for easy installation BROADCAST SPRAY NOZZLES Z.N.T. See www.hyprospraytips.com/certifications for the latest drift reduction standard information. Flexible 110° air inducted spray pattern capable of meeting many spraying situations. Unique angle of incline specifically engineered to maximize droplet deposition on vertical targets. Metric Units Nozzle Droplet Pressure Flow Rate Size Size (BAR) (LPM) 7 Application Rate L/Ha -50 cm Spacing KM/H 8 10 12 15 20 25 UC 1 0,35 60 53 UC 1,5 0,42 72 63 XC 2 0,49 84 74 015 C 3 0,60 103 90 M 4 0,69 118 104 M 5 0,77 132 116 M 6 0,85 146 128 M 7 0,92 158 138 M 8 0,98 168 147 UC 1 0,46 79 69 XC 1,5 0,57 98 86 VC 2 0,65 111 98 M 3 0,80 137 120 M 4 0,92 158 138 02 M 5 1,03 177 155 M 6 1,13 194 170 M 7 1,22 209 183 M 8 1,31 225 197 UC 1 0,58 99 87 XC 1,5 0,71 122 107 VC 2 0,82 141 123 C 3 1,00 171 150 M 4 1,15 197 173 025 M 5 1,29 221 194 M 6 1,41 242 212 M 7 1,53 262 230 M 8 1,63 279 245 UC 1 0,69 118 104 UC 1,5 0,85 146 128 XC 2 0,98 168 147 VC 3 1,20 206 180 03 C 4 1,39 238 209 M 5 1,55 266 233 M 6 1,70 291 255 M 7 1,83 314 275 M 8 1,96 336 294 UC 1 0,81 139 122 XC 1,5 0,99 170 149 VC 2 1,14 195 171 C 3 1,40 240 210 M 4 1,62 278 243 035 M 5 1,81 310 272 M 6 1,98 339 297 M 7 2,14 367 321 M 8 2,29 393 344 UC 1 0,92 158 138 XC 1,5 1,13 194 170 VC 2 1,31 225 197 C 3 1,60 274 240 M 4 1,85 317 278 04 M 5 2,07 355 311 M 6 2,26 387 339 M 7 2,44 418 366 M 8 2,61 447 392 UC 1 1,15 197 173 XC 1,5 1,41 242 212 XC 2 1,63 279 245 C 3 2,00 343 300 C 4 2,31 396 347 05 M 5 2,58 442 387 2,83 485 425 M 6 M 7 3,06 525 459 8 3,27 561 491 M Droplet size based on ASABE S572.1 standard. Use at 3 bar for optimum coverage. 42 50 59 72 83 92 102 110 118 55 68 78 96 110 124 136 146 157 70 85 98 120 138 155 169 184 196 83 102 118 144 167 186 204 220 235 97 119 137 168 194 217 238 257 275 110 136 157 192 222 248 271 293 313 138 169 196 240 277 310 340 367 392 35 42 49 60 69 77 85 92 98 46 57 65 80 92 103 113 122 131 58 71 82 100 115 129 141 153 163 69 85 98 120 139 155 170 183 196 81 99 114 140 162 181 198 214 229 92 113 131 160 185 207 226 244 261 115 141 163 200 231 258 283 306 327 28 34 39 48 55 62 68 74 78 37 46 52 64 74 82 90 98 105 46 57 66 80 92 103 113 122 130 55 68 78 96 111 124 136 146 157 65 79 91 112 130 145 158 171 183 74 90 105 128 148 166 181 195 209 92 113 130 160 185 206 226 245 262 21 25 29 36 41 46 51 55 59 28 34 39 48 55 62 68 73 79 35 43 49 60 69 77 85 92 98 41 51 59 72 83 93 102 110 118 49 59 68 84 97 109 119 128 137 55 68 79 96 111 124 136 146 157 69 85 98 120 139 155 170 184 196 17 20 24 29 33 37 41 44 47 22 27 31 38 44 49 54 59 63 28 34 39 48 55 62 68 73 78 33 41 47 58 67 74 82 88 94 39 48 55 67 78 87 95 103 110 44 54 63 77 89 99 108 117 125 55 68 78 96 111 124 136 147 157 Features Drift Reduction Standards 30 LERAP JKI 14 17 20 75% + 24 1.0-1.25 BAR 28 31 50-75% 34 37 1.3-2.0 BAR 39 18 23 26 75% + 50% 32 1.0-1.25 BAR 1.0-2.0 BAR 37 41 Ref # G-1812 50-75% 45 49 1.3-2.0 BAR 52 23 28 33 75% + 50% 40 1.0-1.5 BAR 1.0-2.5 BAR 46 52 Ref # G-1817 50-75% 56 1.6-2.5 BAR 61 65 28 34 75% 39 75% + 1.5 BAR 48 1.0-1.5 BAR 56 50% 1.6-2.5 BAR 62 50-75% 68 1.6-2.5 BAR Ref # G-1813 73 78 32 40 75% 46 75% + 56 1.0-1.5 BAR 1.0-1.5 BAR 65 50% 1.6-2.5 BAR 72 50-75% 79 1.6-4.0 BAR Ref # G-1811 86 92 37 45 75% 52 75% + 64 1.0-1.5 BAR 1.0-1.5 BAR 50% 74 1.6-2.5 BAR 83 50-75% 90 1.6-4.0 BAR Ref # G-1814 98 104 46 56 75% 65 75% + 80 1.0-1.5 BAR 1.0-1.5 BAR 50% 92 1.6-2.5 BAR 103 50-75% 113 1.6-4.0 BAR Ref # G-1815 122 131 141 Z.N.T. 66% 1.0-2.0 BAR 66% 1.0-3.0 BAR 66% 1.0-3.0 BAR 66% 1.0-4.0 BAR TCT 50% 1.3-2.0 BAR 50% 1.3-2.0 BAR 75% 1.0-1.5 BAR 50% 1.6-2.5 BAR 75% 1.0-1.5 BAR 50% 1.6-2.5 BAR Common Use Plant Health Pattern Tapered Flat Fan Technology Air Induction Material Polyacetal Spray Angle 110º Pressure Range 20-115 PSI (1-8 BAR) Configuration Nozzles, FastCap Optimum Boom Height 15" (35 cm) Spacing 15" (35 cm) 20" (50 cm) Spacing 20" (50 cm) Part Numbers Nozzles 110º FastCaps 110º GA110-015 FC-GA110-015 GA110-02 FC-GA110-02 GA110-025 FC-GA110-025 GA110-03 FC-GA110-03 GA110-035 FC-GA110-035 GA110-04 FC-GA110-04 GA110-05 FC-GA110-05 Replacement Cap Gasket 66% 1.0-4.0 BAR 75% 1.0-1.5 BAR 50% 1.6-4.0 BAR 66% 1.0-4.0 BAR 75% 1.0-1.5 BAR 50% 1.6-4.0 BAR 66% 1.0-4.0 BAR 75% 1.0-1.5 BAR 50% 1.6-4.0 BAR 22W11MF64 Ceramic AVI 110 o The Albuz® AVI draws air into the nozzle and mixes it with the spray to create very coarse droplets that minimize spray drift. The air-filled droplets have a larger footprint on the leaf than similar non-air droplets and hold to the leaf for better control. Durable Albuz ceramic orifice create the longest wearing spray nozzle of its kind. • Excellent drift reduction with large air-filled droplets • Large passages resist plugging • Wear-resistant Albuz ceramic orifice • 80º fan models ideal for use in directed spray applications (See page 179 for more information) • FastCap includes nozzle, cap and gasket US Units Flow NozzleDroplet Size Pressure Rate Size 110º (PSI) (GPM) 4 5 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 15 GAL/1000 Ft 20 inch nozzle spacing 2 3 4 5 2 20 30 0.09 6.7 5.3 4.5 3.3 2.7 2.2 1.8 1.3 0.31 0.20 0.15 0.12 VC VC 40 0.10 7.4 5.9 5.0 3.7 3.0 2.5 2.0 1.5 0.34 0.23 0.17 0.14 VC 50 0.11 8.2 6.5 5.4 4.1 3.3 2.7 2.2 1.6 0.38 0.25 0.19 0.15 01 C 60 0.12 8.9 7.1 5.9 4.5 3.6 3.0 2.4 1.8 0.41 0.27 0.20 0.16 C 70 0.13 9.7 7.7 6.4 4.8 3.9 3.2 2.6 1.9 0.44 0.30 0.22 0.18 C 80 0.14 10.4 8.3 6.9 5.2 4.2 3.5 2.8 2.1 0.48 0.32 0.24 0.19 C 90 0.15 11.1 8.9 7.4 5.6 4.5 3.7 3.0 2.2 0.51 0.34 0.26 0.20 C 100 0.16 11.9 9.5 7.9 5.9 4.8 4.0 3.2 2.4 0.55 0.36 0.27 0.22 VC 30 0.13 9.7 7.7 6.4 4.8 3.9 3.2 2.6 1.9 0.44 0.30 0.22 0.18 VC 40 0.15 11.1 8.9 7.4 5.6 4.5 3.7 3.0 2.2 0.51 0.34 0.26 0.20 50 0.17 12.6 10.1 8.4 6.3 5.0 4.2 3.4 2.5 0.58 0.39 0.29 0.23 015 VC C 60 0.18 13.4 10.7 8.9 6.7 5.3 4.5 3.6 2.7 0.61 0.41 0.31 0.25 C 70 0.20 14.9 11.9 9.9 7.4 5.9 5.0 4.0 3.0 0.68 0.45 0.34 0.27 C 80 0.21 15.6 12.5 10.4 7.8 6.2 5.2 4.2 3.1 0.72 0.48 0.36 0.29 C 90 0.23 17.1 13.7 11.4 8.5 6.8 5.7 4.6 3.4 0.78 0.52 0.39 0.31 C 100 0.24 17.8 14.3 11.9 8.9 7.1 5.9 4.8 3.6 0.82 0.55 0.41 0.33 VC 30 0.17 12.6 10.1 8.4 6.3 5.0 4.2 3.4 2.5 0.58 0.39 0.29 0.23 VC 40 0.20 14.9 11.9 9.9 7.4 5.9 5.0 4.0 3.0 0.68 0.45 0.34 0.27 VC 50 0.22 16.3 13.1 10.9 8.2 6.5 5.4 4.4 3.3 0.75 0.50 0.38 0.30 02 C 60 0.24 17.8 14.3 11.9 8.9 7.1 5.9 4.8 3.6 0.82 0.55 0.41 0.33 C 70 0.26 19.3 15.4 12.9 9.7 7.7 6.4 5.1 3.9 0.89 0.59 0.44 0.35 C 80 0.28 20.8 16.6 13.9 10.4 8.3 6.9 5.5 4.2 0.95 0.64 0.48 0.38 C 90 0.30 22.3 17.8 14.9 11.1 8.9 7.4 5.9 4.5 1.02 0.68 0.51 0.41 C 100 0.32 23.8 19.0 15.8 11.9 9.5 7.9 6.3 4.8 1.09 0.73 0.55 0.44 6.5 5.4 4.4 3.3 0.75 0.50 0.38 0.30 XC 30 0.22 16.3 13.1 10.9 8.2 VC 40 0.25 18.6 14.9 12.4 9.3 7.4 6.2 5.0 3.7 0.85 0.57 0.43 0.34 50 0.28 20.8 16.6 13.9 10.4 8.3 6.9 5.5 4.2 0.95 0.64 0.48 0.38 025 VC C 60 0.31 23.0 18.4 15.3 11.5 9.2 7.7 6.1 4.6 1.06 0.70 0.53 0.42 C 70 0.33 24.5 19.6 16.3 12.3 9.8 8.2 6.5 4.9 1.13 0.75 0.56 0.45 C 80 0.35 26.0 20.8 17.3 13.0 10.4 8.7 6.9 5.2 1.19 0.80 0.60 0.48 C 90 0.38 28.2 22.6 18.8 14.1 11.3 9.4 7.5 5.6 1.30 0.86 0.65 0.52 C 100 0.40 29.7 23.8 19.8 14.9 11.9 9.9 7.9 5.9 1.36 0.91 0.68 0.55 XC 30 0.26 19.3 15.4 12.9 9.7 7.7 6.4 5.1 3.9 0.89 0.59 0.44 0.35 XC 40 0.30 22.3 17.8 14.9 11.1 8.9 7.4 5.9 4.5 1.02 0.68 0.51 0.41 VC 50 0.34 25.2 20.2 16.8 12.6 10.1 8.4 6.7 5.0 1.16 0.77 0.58 0.46 03 C 60 0.37 27.5 22.0 18.3 13.7 11.0 9.2 7.3 5.5 1.26 0.84 0.63 0.50 C 70 0.40 29.7 23.8 19.8 14.9 11.9 9.9 7.9 5.9 1.36 0.91 0.68 0.55 C 80 0.42 31.2 24.9 20.8 15.6 12.5 10.4 8.3 6.2 1.43 0.95 0.72 0.57 C 90 0.45 33.4 26.7 22.3 16.7 13.4 11.1 8.9 6.7 1.53 1.02 0.77 0.61 C 100 0.47 34.9 27.9 23.3 17.4 14.0 11.6 9.3 7.0 1.60 1.07 0.80 0.64 XC 30 0.35 26.0 20.8 17.3 13.0 10.4 8.7 6.9 5.2 1.19 0.80 0.60 0.48 XC 40 0.40 29.7 23.8 19.8 14.9 11.9 9.9 7.9 5.9 1.36 0.91 0.68 0.55 XC 50 0.45 33.4 26.7 22.3 16.7 13.4 11.1 8.9 6.7 1.53 1.02 0.77 0.61 VC 60 0.49 36.4 29.1 24.3 18.2 14.6 12.1 9.7 7.3 1.67 1.11 0.84 0.67 04 VC 70 0.53 39.4 31.5 26.2 19.7 15.7 13.1 10.5 7.9 1.81 1.20 0.90 0.72 VC 80 0.57 42.3 33.9 28.2 21.2 16.9 14.1 11.3 8.5 1.94 1.30 0.97 0.78 VC 90 0.60 44.6 35.6 29.7 22.3 17.8 14.9 11.9 8.9 2.05 1.36 1.02 0.82 VC 100 0.63 46.8 37.4 31.2 23.4 18.7 15.6 12.5 9.4 2.15 1.43 1.07 0.86 XC 30 0.43 31.9 25.5 21.3 16.0 12.8 10.6 8.5 6.4 1.47 0.98 0.73 0.59 XC 40 0.50 37.1 29.7 24.8 18.6 14.9 12.4 9.9 7.4 1.71 1.14 0.85 0.68 XC 50 0.56 41.6 33.3 27.7 20.8 16.6 13.9 11.1 8.3 1.91 1.27 0.95 0.76 XC 60 0.61 45.3 36.2 30.2 22.6 18.1 15.1 12.1 9.1 2.08 1.39 1.04 0.83 05 VC 70 0.66 49.0 39.2 32.7 24.5 19.6 16.3 13.1 9.8 2.25 1.50 1.13 0.90 VC 80 0.71 52.7 42.2 35.1 26.4 21.1 17.6 14.1 10.5 2.42 1.61 1.21 0.97 VC 90 0.75 55.7 44.6 37.1 27.8 22.3 18.6 14.9 11.1 2.56 1.71 1.28 1.02 VC 100 0.79 58.7 46.9 39.1 29.3 23.5 19.6 15.6 11.7 2.69 1.80 1.35 1.08 XC 30 0.52 38.6 30.9 25.7 19.3 15.4 12.9 10.3 7.7 1.77 1.18 0.89 0.71 XC 40 0.60 44.6 35.6 29.7 22.3 17.8 14.9 11.9 8.9 2.05 1.36 1.02 0.82 XC 50 0.67 49.7 39.8 33.2 24.9 19.9 16.6 13.3 9.9 2.28 1.52 1.14 0.91 XC 60 0.73 54.2 43.4 36.1 27.1 21.7 18.1 14.5 10.8 2.49 1.66 1.24 1.00 06 XC 70 0.79 58.7 46.9 39.1 29.3 23.5 19.6 15.6 11.7 2.69 1.80 1.35 1.08 VC 80 0.85 63.1 50.5 42.1 31.6 25.2 21.0 16.8 12.6 2.90 1.93 1.45 1.16 VC 90 0.90 66.8 53.5 44.6 33.4 26.7 22.3 17.8 13.4 3.07 2.05 1.53 1.23 VC 100 0.95 70.5 56.4 47.0 35.3 28.2 23.5 18.8 14.1 3.24 2.16 1.62 1.30 XC 30 0.69 51.2 41.0 34.2 25.6 20.5 17.1 13.7 10.2 2.35 1.57 1.18 0.94 XC 40 0.80 59.4 47.5 39.6 29.7 23.8 19.8 15.8 11.9 2.73 1.82 1.36 1.09 XC 50 0.89 66.1 52.9 44.1 33.0 26.4 22.0 17.6 13.2 3.03 2.02 1.52 1.21 XC 60 0.98 72.8 58.2 48.5 36.4 29.1 24.3 19.4 14.6 3.34 2.23 1.67 1.34 08 XC 70 1.06 78.7 63.0 52.5 39.4 31.5 26.2 21.0 15.7 3.61 2.41 1.81 1.45 XC 80 1.13 83.9 67.1 55.9 42.0 33.6 28.0 22.4 16.8 3.85 2.57 1.93 1.54 XC 90 1.20 89.1 71.3 59.4 44.6 35.6 29.7 23.8 17.8 4.09 2.73 2.05 1.64 XC 100 1.26 93.6 74.8 62.4 46.8 37.4 31.2 24.9 18.7 4.30 2.86 2.15 1.72 XC 30 0.87 64.6 51.7 43.1 32.3 25.8 21.5 17.2 12.9 2.97 1.98 1.48 1.19 XC 40 1.00 74.3 59.4 49.5 37.1 29.7 24.8 19.8 14.9 3.41 2.27 1.71 1.36 XC 50 1.12 83.2 66.5 55.4 41.6 33.3 27.7 22.2 16.6 3.82 2.55 1.91 1.53 XC 60 1.22 90.6 72.5 60.4 45.3 36.2 30.2 24.2 18.1 4.16 2.77 2.08 1.66 XC 70 1.32 98.0 78.4 65.3 49.0 39.2 32.7 26.1 19.6 4.50 3.00 2.25 1.80 10 XC 80 1.41 105 83.8 69.8 52.3 41.9 34.9 27.9 20.9 4.81 3.21 2.40 1.92 XC 90 1.50 111 89.1 74.3 55.7 44.6 37.1 29.7 22.3 5.12 3.41 2.56 2.05 XC 100 1.58 117 93.9 78.2 58.7 46.9 39.1 31.3 23.5 5.39 3.59 2.69 2.16 Albuz® is a registered trademark of SAINT-GOBAIN SOLCERA, SAINT GOBAIN CERAMIQUES AVANCEES DESMARQUEST, CERAMIQUES TECHNIQUES DESMARQUEST, and SOCIETE DESMARQUEST ET CEC.. ® Hypro is a registered trademark of Pentair. Droplet size based on ASABE S572.1 standard. 142 CENTRIFUGAL PUMPS BROADCAST SPRAY NOZZLES Metric Units Nozzle Size 01 015 02 025 03 04 05 06 08 10 Droplet Size Pressure Flow 110o (bar) (L/min) VC VC VC C C C VC VC VC VC C C VC VC VC VC VC C XC VC VC VC VC VC XC XC VC VC VC VC XC XC VC VC VC VC XC XC XC VC VC VC XC XC XC VC VC VC XC XC XC XC XC XC XC XC XC XC XC XC 2 3 4 5 6 7 2 3 4 5 6 7 2 3 4 5 6 7 2 3 4 5 6 7 2 3 4 5 6 7 2 3 4 5 6 7 2 3 4 5 6 7 2 3 4 5 6 7 2 3 4 5 6 7 2 3 4 5 6 7 0.33 0.40 0.46 0.52 0.57 0.61 0.49 0.60 0.69 0.77 0.85 0.92 0.65 0.80 0.92 1.03 1.13 1.22 0.82 1.00 1.15 1.29 1.41 1.53 0.98 1.20 1.39 1.55 1.70 1.83 1.31 1.60 1.85 2.07 2.26 2.44 1.63 2.00 2.31 2.58 2.83 3.06 1.96 2.40 2.77 3.10 3.39 3.67 2.61 3.20 3.70 4.13 4.53 4.89 3.27 4.00 4.62 5.16 5.66 6.11 6 87 105 121 137 150 161 129 158 182 203 224 242 171 211 242 271 297 321 216 263 303 339 371 403 258 316 366 408 447 482 345 421 487 545 595 642 429 526 608 679 745 805 516 632 729 816 892 966 687 842 974 1087 1192 1287 861 1053 1216 1358 1489 1608 8 65 79 91 103 113 120 97 118 136 152 168 182 128 158 182 203 223 241 162 197 227 255 278 302 193 237 274 306 336 361 259 316 365 409 446 482 322 395 456 509 559 604 387 474 547 612 669 724 515 632 730 815 894 965 645 789 912 1018 1117 1206 10 52 63 73 82 90 96 77 95 109 122 134 145 103 126 145 163 178 193 129 158 182 204 223 242 155 189 219 245 268 289 207 253 292 327 357 385 257 316 365 407 447 483 309 379 437 489 535 579 412 505 584 652 715 772 516 632 729 815 894 965 Application Rate L/Ha- 50 cm Spacing KM/H 12 43 53 61 68 75 80 64 79 91 101 112 121 86 105 121 136 149 161 108 132 151 170 186 201 129 158 183 204 224 241 172 211 243 272 297 321 214 263 304 339 372 403 258 316 364 408 446 483 343 421 487 543 596 643 430 526 608 679 745 804 14 37 45 52 59 64 69 55 68 78 87 96 104 73 90 104 116 127 138 92 113 130 145 159 173 111 135 157 175 192 206 148 180 209 233 255 275 184 226 261 291 319 345 221 271 312 350 382 414 294 361 417 466 511 552 369 451 521 582 638 689 16 33 39 45 51 56 60 48 59 68 76 84 91 64 79 91 102 112 120 81 99 113 127 139 151 97 118 137 153 168 181 129 158 183 204 223 241 161 197 228 255 279 302 193 237 273 306 335 362 258 316 365 408 447 483 323 395 456 509 559 603 18 29 35 40 46 50 54 43 53 61 68 75 81 57 70 81 90 99 107 72 88 101 113 124 134 86 105 122 136 149 161 115 140 162 182 198 214 143 175 203 226 248 268 172 211 243 272 297 322 229 281 325 362 397 429 287 351 405 453 496 536 Droplet size based on ASABE S572.1 standard. 143 Features 20 26 32 36 41 45 48 39 47 54 61 67 73 51 63 73 81 89 96 65 79 91 102 111 121 77 95 110 122 134 144 103 126 146 163 178 193 129 158 182 204 223 242 155 189 219 245 268 290 206 253 292 326 358 386 258 316 365 407 447 482 25 21 25 29 33 36 39 31 38 44 49 54 58 41 51 58 65 71 77 52 63 73 81 89 97 62 76 88 98 107 116 83 101 117 131 143 154 103 126 146 163 179 193 124 152 175 196 214 232 165 202 234 261 286 309 207 253 292 326 357 386 30 17 21 24 27 30 32 26 32 36 41 45 48 34 42 48 54 59 64 43 53 61 68 74 81 52 63 73 82 89 96 69 84 97 109 119 128 86 105 122 136 149 161 103 126 146 163 178 193 137 168 195 217 238 257 172 211 243 272 298 322 Common Use Weeds Pattern Tapered Flat Fan Technology Air Induction Material Ceramic Spray Angle 110º Pressure Range 30-100 PSI (2-7 BAR) Configuration Nozzles, FastCap Complete Optimum Boom Height 80° - 15" (35 cm) Spacing 22" (56 cm) 80° - 20" (50 cm) Spacing 30" (76 cm) 110° - 15" (35 cm) Spacing 15" (35 cm) 110° - 20" (50 cm) Spacing 20" (50 cm) Nozzles FastCaps AVI-11001 FC-AVI-11001 AVI-110015 FC-AVI-110015 AVI-11002 FC-AVI-11002 AVI-110025 FC-AVI-110025 AVI-11003 FC-AVI-11003 AVI-11004 FC-AVI-11004 AVI-11005 FC-AVI-11005 AVI-11006 FC-AVI-11006 AVI-11008 FC-AVI-11008 AVI-11010 FC-AVI-11010 Replacement Cap Gasket 22W11MF64 Guardian 120 o Guardian spray nozzles are ideal for insecticide and fungicide applications especially when used with suspension based adjuvants. The Guardian’s unique 20° inclined spray pattern allows users to aim the spray rearward for general spraying, forward for vertical targets, or alternate nozzles to create a twin spray. • Pre-orifice design for courser spray availability the flat fans • Delivers a consistent droplet and spray pattern • A bold arrow indicates incline direction for easy installation • FastCap complete includes nozzle, cap, gasket and integrated strainers Nozzle Droplet Pressure Flow Rate Size Size (PSI) (GPM) 015 02 025 03 04 05 06 08 M M M M F F F F F M M M M M M M M F M M M M M M M M M C M M M M M M M M M VC VC C C C M M M M M XC XC VC VC C M M M M F XC XC VC VC C M M M M M XC VC C M M M M M F F 20 30 40 50 60 70 80 90 100 115 20 30 40 50 60 70 80 90 100 115 20 30 40 50 60 70 80 90 100 115 20 30 40 50 60 70 80 90 100 115 20 30 40 50 60 70 80 90 100 115 20 30 40 50 60 70 80 90 100 115 20 30 40 50 60 70 80 90 100 115 20 30 40 50 60 70 80 90 100 115 0.11 0.13 0.15 0.17 0.18 0.20 0.21 0.23 0.24 0.25 0.14 0.17 0.20 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.18 0.22 0.25 0.28 0.31 0.33 0.35 0.38 0.40 0.42 0.21 0.26 0.30 0.34 0.37 0.40 0.42 0.45 0.47 0.51 0.28 0.35 0.40 0.45 0.49 0.53 0.57 0.60 0.63 0.68 0.35 0.43 0.50 0.56 0.61 0.66 0.71 0.75 0.79 0.85 0.42 0.52 0.60 0.67 0.73 0.79 0.85 0.90 0.95 1.02 0.57 0.69 0.80 0.89 0.98 1.06 1.13 1.20 1.26 1.36 4 8.2 9.7 11.1 12.6 13.4 14.9 15.6 17.1 17.8 18.6 10.4 12.6 14.9 16.3 17.8 19.3 20.8 22.3 23.8 25.2 13.4 16.3 18.6 20.8 23.0 24.5 26.0 28.2 29.7 31.2 15.6 19.3 22.3 25.2 27.5 29.7 31.2 33.4 34.9 37.9 20.8 26.0 29.7 33.4 36.4 39.4 42.3 44.6 46.8 50.5 26.0 31.9 37.1 41.6 45.3 49.0 52.7 55.7 58.7 63.1 31.2 38.6 44.6 49.7 54.2 58.7 63.1 66.8 70.5 75.7 42.3 51.2 59.4 66.1 72.8 78.7 83.9 89.1 93.6 101 5 6.5 7.7 8.9 10.1 10.7 11.9 12.5 13.7 14.3 14.9 8.3 10.1 11.9 13.1 14.3 15.4 16.6 17.8 19.0 20.2 10.7 13.1 14.9 16.6 18.4 19.6 20.8 22.6 23.8 24.9 12.5 15.4 17.8 20.2 22.0 23.8 24.9 26.7 27.9 30.3 16.6 20.8 23.8 26.7 29.1 31.5 33.9 35.6 37.4 40.4 20.8 25.5 29.7 33.3 36.2 39.2 42.2 44.6 46.9 50.5 24.9 30.9 35.6 39.8 43.4 46.9 50.5 53.5 56.4 60.6 33.9 41.0 47.5 52.9 58.2 63.0 67.1 71.3 74.8 80.8 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 5.4 6.4 7.4 8.4 8.9 9.9 10.4 11.4 11.9 12.4 6.9 8.4 9.9 10.9 11.9 12.9 13.9 14.9 15.8 16.8 8.9 10.9 12.4 13.9 15.3 16.3 17.3 18.8 19.8 20.8 10.4 12.9 14.9 16.8 18.3 19.8 20.8 22.3 23.3 25.2 13.9 17.3 19.8 22.3 24.3 26.2 28.2 29.7 31.2 33.7 17.3 21.3 24.8 27.7 30.2 32.7 35.1 37.1 39.1 42.1 20.8 25.7 29.7 33.2 36.1 39.1 42.1 44.6 47.0 50.5 28.2 34.2 39.6 44.1 48.5 52.5 55.9 59.4 62.4 67.3 4.1 4.8 5.6 6.3 6.7 7.4 7.8 8.5 8.9 9.3 5.2 6.3 7.4 8.2 8.9 9.7 10.4 11.1 11.9 12.6 6.7 8.2 9.3 10.4 11.5 12.3 13.0 14.1 14.9 15.6 7.8 9.7 11.1 12.6 13.7 14.9 15.6 16.7 17.4 18.9 10.4 13.0 14.9 16.7 18.2 19.7 21.2 22.3 23.4 25.2 13.0 16.0 18.6 20.8 22.6 24.5 26.4 27.8 29.3 31.6 15.6 19.3 22.3 24.9 27.1 29.3 31.6 33.4 35.3 37.9 21.2 25.6 29.7 33.0 36.4 39.4 42.0 44.6 46.8 50.5 3.3 3.9 4.5 5.0 5.3 5.9 6.2 6.8 7.1 7.4 4.2 5.0 5.9 6.5 7.1 7.7 8.3 8.9 9.5 10.1 5.3 6.5 7.4 8.3 9.2 9.8 10.4 11.3 11.9 12.5 6.2 7.7 8.9 10.1 11.0 11.9 12.5 13.4 14.0 15.1 8.3 10.4 11.9 13.4 14.6 15.7 16.9 17.8 18.7 20.2 10.4 12.8 14.9 16.6 18.1 19.6 21.1 22.3 23.5 25.2 12.5 15.4 17.8 19.9 21.7 23.5 25.2 26.7 28.2 30.3 16.9 20.5 23.8 26.4 29.1 31.5 33.6 35.6 37.4 40.4 2.7 3.2 3.7 4.2 4.5 5.0 5.2 5.7 5.9 6.2 3.5 4.2 5.0 5.4 5.9 6.4 6.9 7.4 7.9 8.4 4.5 5.4 6.2 6.9 7.7 8.2 8.7 9.4 9.9 10.4 5.2 6.4 7.4 8.4 9.2 9.9 10.4 11.1 11.6 12.6 6.9 8.7 9.9 11.1 12.1 13.1 14.1 14.9 15.6 16.8 8.7 10.6 12.4 13.9 15.1 16.3 17.6 18.6 19.6 21.0 10.4 12.9 14.9 16.6 18.1 19.6 21.0 22.3 23.5 25.2 14.1 17.1 19.8 22.0 24.3 26.2 28.0 29.7 31.2 33.7 GAL/1000 Ft 15 2.2 2.6 3.0 3.4 3.6 4.0 4.2 4.6 4.8 5.0 2.8 3.4 4.0 4.4 4.8 5.1 5.5 5.9 6.3 6.7 3.6 4.4 5.0 5.5 6.1 6.5 6.9 7.5 7.9 8.3 4.2 5.1 5.9 6.7 7.3 7.9 8.3 8.9 9.3 10.1 5.5 6.9 7.9 8.9 9.7 10.5 11.3 11.9 12.5 13.5 6.9 8.5 9.9 11.1 12.1 13.1 14.1 14.9 15.6 16.8 8.3 10.3 11.9 13.3 14.5 15.6 16.8 17.8 18.8 20.2 11.3 13.7 15.8 17.6 19.4 21.0 22.4 23.8 24.9 26.9 Droplet size based on ASABE S572.1 standard. 144 20 1.6 1.9 2.2 2.5 2.7 3.0 3.1 3.4 3.6 3.7 2.1 2.5 3.0 3.3 3.6 3.9 4.2 4.5 4.8 5.0 2.7 3.3 3.7 4.2 4.6 4.9 5.2 5.6 5.9 6.2 3.1 3.9 4.5 5.0 5.5 5.9 6.2 6.7 7.0 7.6 4.2 5.2 5.9 6.7 7.3 7.9 8.5 8.9 9.4 10.1 5.2 6.4 7.4 8.3 9.1 9.8 10.5 11.1 11.7 12.6 6.2 7.7 8.9 9.9 10.8 11.7 12.6 13.4 14.1 15.1 8.5 10.2 11.9 13.2 14.6 15.7 16.8 17.8 18.7 20.2 2 0.38 0.44 0.51 0.58 0.61 0.68 0.72 0.78 0.82 0.85 0.48 0.58 0.68 0.75 0.82 0.89 0.95 1.02 1.09 1.16 0.61 0.75 0.85 0.95 1.06 1.13 1.19 1.30 1.36 1.43 0.72 0.89 1.02 1.16 1.26 1.36 1.43 1.53 1.60 1.74 0.95 1.19 1.36 1.53 1.67 1.81 1.94 2.05 2.15 2.32 1.19 1.47 1.71 1.91 2.08 2.25 2.42 2.56 2.69 2.90 1.43 1.77 2.05 2.28 2.49 2.69 2.90 3.07 3.24 3.48 1.94 2.35 2.73 3.03 3.34 3.61 3.85 4.09 4.30 4.64 3 0.25 0.30 0.34 0.39 0.41 0.45 0.48 0.52 0.55 0.57 0.32 0.39 0.45 0.50 0.55 0.59 0.64 0.68 0.73 0.77 0.41 0.50 0.57 0.64 0.70 0.75 0.80 0.86 0.91 0.95 0.48 0.59 0.68 0.77 0.84 0.91 0.95 1.02 1.07 1.16 0.64 0.80 0.91 1.02 1.11 1.20 1.30 1.36 1.43 1.55 0.80 0.98 1.14 1.27 1.39 1.50 1.61 1.71 1.80 1.93 0.95 1.18 1.36 1.52 1.66 1.80 1.93 2.05 2.16 2.32 1.30 1.57 1.82 2.02 2.23 2.41 2.57 2.73 2.86 3.09 1 2 20 inch nozzle spacing 4 0.19 0.22 0.26 0.29 0.31 0.34 0.36 0.39 0.41 0.43 0.24 0.29 0.34 0.38 0.41 0.44 0.48 0.51 0.55 0.58 0.31 0.38 0.43 0.48 0.53 0.56 0.60 0.65 0.68 0.72 0.36 0.44 0.51 0.58 0.63 0.68 0.72 0.77 0.80 0.87 0.48 0.60 0.68 0.77 0.84 0.90 0.97 1.02 1.07 1.16 0.60 0.73 0.85 0.95 1.04 1.13 1.21 1.28 1.35 1.45 0.72 0.89 1.02 1.14 1.24 1.35 1.45 1.53 1.62 1.74 0.97 1.18 1.36 1.52 1.67 1.81 1.93 2.05 2.15 2.32 5 0.15 0.18 0.20 0.23 0.25 0.27 0.29 0.31 0.33 0.34 0.19 0.23 0.27 0.30 0.33 0.35 0.38 0.41 0.44 0.46 0.25 0.30 0.34 0.38 0.42 0.45 0.48 0.52 0.55 0.57 0.29 0.35 0.41 0.46 0.50 0.55 0.57 0.61 0.64 0.70 0.38 0.48 0.55 0.61 0.67 0.72 0.78 0.82 0.86 0.93 0.48 0.59 0.68 0.76 0.83 0.90 0.97 1.02 1.08 1.16 0.57 0.71 0.82 0.91 1.00 1.08 1.16 1.23 1.30 1.39 0.78 0.94 1.09 1.21 1.34 1.45 1.54 1.64 1.72 1.86 3 2 1. Unitized spray nozzle design for easy single piece operation 2. 20° spray incline for canopy penetration 3. Non-Air Inducted; Pre-orifice design for excellent performance with suspension solutions BROADCAST SPRAY NOZZLES 120° wide, non-air inducted spray pattern for superior coverage in many spraying applications. Metric Units Noz- Droplet Pressure Flow Rate zle Size (BAR) (LPM) Size 7 1,5 0,42 72 M 2 0,49 84 M 3 0,60 103 M 4 0,69 118 015 F 5 0,77 132 F 6 0,85 146 F 7 0,92 158 F 8 0,98 168 1,5 0,57 98 M 2 0,65 111 M 3 0,80 137 M 4 0,92 158 02 M 5 1,03 177 M 6 1,13 194 M 7 1,22 209 F 8 1,31 225 1,5 0,71 122 M 2 0,82 141 M 3 1,00 171 M 4 1,15 197 025 M 5 1,29 221 M 6 1,41 242 M 7 1,53 262 8 1,63 279 M C 1,5 0,85 146 M 2 0,98 168 M 3 1,20 206 M 4 1,39 238 03 M 5 1,55 266 M 6 1,70 291 M 7 1,83 314 8 1,96 336 M VC 1,5 1,13 194 VC 2 1,31 225 C 3 1,60 274 C 4 1,85 317 04 M 5 2,07 355 M 6 2,26 387 M 7 2,44 418 M 8 2,61 447 XC 1,5 1,41 242 XC 2 1,63 279 VC 3 2,00 343 C 4 2,31 396 05 M 5 2,58 442 M 6 2,83 485 M 7 3,06 525 F 8 3,27 561 XC 1,5 1,70 291 XC 2 1,96 336 VC 3 2,40 411 C 4 2,77 475 06 M 5 3,10 531 M 6 3,39 581 M 7 3,67 629 M 8 3,92 672 XC 1,5 2,26 387 VC 2 2,61 447 C 3 3,20 549 M 4 3,70 634 08 M 5 4,13 708 M 6 4,53 777 F 7 4,89 838 F 8 5,23 897 Droplet size based on ASABE S572.1 standard. 8 63 74 90 104 116 128 138 147 86 98 120 138 155 170 183 197 107 123 150 173 194 212 230 245 128 147 180 209 233 255 275 294 170 197 240 278 311 339 366 392 212 245 300 347 387 425 459 491 255 294 360 416 465 509 551 588 339 392 480 555 620 680 734 785 20° pattern incline; alternate nozzles for a twin spray pattern, excellent for suspension based tank mixes. Application Rate L/Ha -50 cm Spacing KM/H 10 12 15 20 50 59 72 83 92 102 110 118 68 78 96 110 124 136 146 157 85 98 120 138 155 169 184 196 102 118 144 167 186 204 220 235 136 157 192 222 248 271 293 313 169 196 240 277 310 340 367 392 204 235 288 332 372 407 440 470 271 313 384 444 496 544 587 628 42 49 60 69 77 85 92 98 57 65 80 92 103 113 122 131 71 82 100 115 129 141 153 163 85 98 120 139 155 170 183 196 113 131 160 185 207 226 244 261 141 163 200 231 258 283 306 327 170 196 240 277 310 339 367 392 226 261 320 370 413 453 489 523 34 39 48 55 62 68 74 78 46 52 64 74 82 90 98 105 57 66 80 92 103 113 122 130 68 78 96 111 124 136 146 157 90 105 128 148 166 181 195 209 113 130 160 185 206 226 245 262 136 157 192 222 248 271 294 314 181 209 256 296 330 362 391 418 25 29 36 41 46 51 55 59 34 39 48 55 62 68 73 79 43 49 60 69 77 85 92 98 51 59 72 83 93 102 110 118 68 79 96 111 124 136 146 157 85 98 120 139 155 170 184 196 102 118 144 166 186 203 220 235 136 157 192 222 248 272 293 314 145 Features 25 20 24 29 33 37 41 44 47 27 31 38 44 49 54 59 63 34 39 48 55 62 68 73 78 41 47 58 67 74 82 88 94 54 63 77 89 99 108 117 125 68 78 96 111 124 136 147 157 82 94 115 133 149 163 176 188 108 125 154 178 198 217 235 251 30 17 20 24 28 31 34 37 39 23 26 32 37 41 45 49 52 28 33 40 46 52 56 61 65 34 39 48 56 62 68 73 78 45 52 64 74 83 90 98 104 56 65 80 92 103 113 122 131 68 78 96 111 124 136 147 157 90 104 128 148 165 181 196 209 Common Use Plant Health Pattern Tapered Flat Fan Technology Pre-Orifice Material Polyacetal Spray Angle 120º Pressure Range 20-115 PSI (1-8 BAR) Configuration FastCap Complete Optimum Boom Height 15" (35 cm) Spacing 13" (33 cm) 20" (50 cm) Spacing 18" (46 cm) Part Numbers FastCaps® 120º GRD120-015 GRD120-02 GRD120-025 GRD120-03 GRD120-04 GRD120-05 GRD120-06 GRD120-08 Replacement Nozzle Strainer TS02-100 100 mesh strainer for size 015-03 TS02-50 50 mesh strainer for size 04-08 Replacement Cap Gasket 22W11MF64 Lo-Drift 80 & 110 o o The Lo-Drift is the original drift-reducing nozzle. The special two-part construction includes a pre-orifice, which reduces the number of drift prone droplets. • Significantly reduces spray drift, widening the operational window • Balanced droplet size for effective, on-target spray • Available in acid-resistant PVDF (See page 190) US Units Droplet Nozzle Pressure Flow Size Rate Size 80º 110º (PSI) (GPM) M M 20 0.11 M M 30 0.13 M M 40 0.15 M F 50 0.17 M F 60 0.18 M F 70 0.20 C M 20 0.14 C M 30 0.17 02 M F 40 0.20 M F 50 0.22 M F 60 0.24 M F 70 0.26 M 20 0.18 M 30 0.22 025 M 40 0.25 M 50 0.28 M 60 0.31 M 70 0.33 C C 20 0.21 C M 30 0.26 03 C M 40 0.30 M M 50 0.34 M M 60 0.37 M M 70 0.40 C C 20 0.28 C M 30 0.35 04 C M 40 0.40 M M 50 0.45 M M 60 0.49 M M 70 0.53 C C 20 0.35 C C 30 0.43 05 C M 40 0.50 C M 50 0.56 C M 60 0.61 M F 70 0.66 VC VC 20 0.42 VC C 30 0.52 06 C M 40 0.60 C M 50 0.67 C M 60 0.73 C M 70 0.79 XC VC 20 0.57 VC C 30 0.69 08 VC C 40 0.80 C M 50 0.89 C M 60 0.98 M C 70 1.06 Droplet size based on ASABE S572.1 standard. 015 4 8.2 9.7 11.1 12.6 13.4 14.9 10.4 12.6 14.9 16.3 17.8 19.3 13.4 16.3 18.6 20.8 23.0 24.5 15.6 19.3 22.3 25.2 27.5 29.7 20.8 26.0 29.7 33.4 36.4 39.4 26.0 31.9 37.1 41.6 45.3 49.0 31.2 38.6 44.6 49.7 54.2 58.7 42.3 51.2 59.4 66.1 72.8 78.7 5 6.5 7.7 8.9 10.1 10.7 11.9 8.3 10.1 11.9 13.1 14.3 15.4 10.7 13.1 14.9 16.6 18.4 19.6 12.5 15.4 17.8 20.2 22.0 23.8 16.6 20.8 23.8 26.7 29.1 31.5 20.8 25.5 29.7 33.3 36.2 39.2 24.9 30.9 35.6 39.8 43.4 46.9 33.9 41.0 47.5 52.9 58.2 63.0 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 5.4 6.4 7.4 8.4 8.9 9.9 6.9 8.4 9.9 10.9 11.9 12.9 8.9 10.9 12.4 13.9 15.3 16.3 10.4 12.9 14.9 16.8 18.3 19.8 13.9 17.3 19.8 22.3 24.3 26.2 17.3 21.3 24.8 27.7 30.2 32.7 20.8 25.7 29.7 33.2 36.1 39.1 28.2 34.2 39.6 44.1 48.5 52.5 4.1 4.8 5.6 6.3 6.7 7.4 5.2 6.3 7.4 8.2 8.9 9.7 6.7 8.2 9.3 10.4 11.5 12.3 7.8 9.7 11.1 12.6 13.7 14.9 10.4 13.0 14.9 16.7 18.2 19.7 13.0 16.0 18.6 20.8 22.6 24.5 15.6 19.3 22.3 24.9 27.1 29.3 21.2 25.6 29.7 33.0 36.4 39.4 3.3 3.9 4.5 5.0 5.3 5.9 4.2 5.0 5.9 6.5 7.1 7.7 5.3 6.5 7.4 8.3 9.2 9.8 6.2 7.7 8.9 10.1 11.0 11.9 8.3 10.4 11.9 13.4 14.6 15.7 10.4 12.8 14.9 16.6 18.1 19.6 12.5 15.4 17.8 19.9 21.7 23.5 16.9 20.5 23.8 26.4 29.1 31.5 2.7 3.2 3.7 4.2 4.5 5.0 3.5 4.2 5.0 5.4 5.9 6.4 4.5 5.4 6.2 6.9 7.7 8.2 5.2 6.4 7.4 8.4 9.2 9.9 6.9 8.7 9.9 11.1 12.1 13.1 8.7 10.6 12.4 13.9 15.1 16.3 10.4 12.9 14.9 16.6 18.1 19.6 14.1 17.1 19.8 22.0 24.3 26.2 146 GAL/1000 Ft 15 2.2 2.6 3.0 3.4 3.6 4.0 2.8 3.4 4.0 4.4 4.8 5.1 3.6 4.4 5.0 5.5 6.1 6.5 4.2 5.1 5.9 6.7 7.3 7.9 5.5 6.9 7.9 8.9 9.7 10.5 6.9 8.5 9.9 11.1 12.1 13.1 8.3 10.3 11.9 13.3 14.5 15.6 11.3 13.7 15.8 17.6 19.4 21.0 20 1.6 1.9 2.2 2.5 2.7 3.0 2.1 2.5 3.0 3.3 3.6 3.9 2.7 3.3 3.7 4.2 4.6 4.9 3.1 3.9 4.5 5.0 5.5 5.9 4.2 5.2 5.9 6.7 7.3 7.9 5.2 6.4 7.4 8.3 9.1 9.8 6.2 7.7 8.9 9.9 10.8 11.7 8.5 10.2 11.9 13.2 14.6 15.7 2 0.38 0.44 0.51 0.58 0.61 0.68 0.48 0.58 0.68 0.75 0.82 0.89 0.61 0.75 0.85 0.95 1.06 1.13 0.72 0.89 1.02 1.16 1.26 1.36 0.95 1.19 1.36 1.53 1.67 1.81 1.19 1.47 1.71 1.91 2.08 2.25 1.43 1.77 2.05 2.28 2.49 2.69 1.94 2.35 2.73 3.03 3.34 3.61 20 inch nozzle spacing 3 0.25 0.30 0.34 0.39 0.41 0.45 0.32 0.39 0.45 0.50 0.55 0.59 0.41 0.50 0.57 0.64 0.70 0.75 0.48 0.59 0.68 0.77 0.84 0.91 0.64 0.80 0.91 1.02 1.11 1.20 0.80 0.98 1.14 1.27 1.39 1.50 0.95 1.18 1.36 1.52 1.66 1.80 1.30 1.57 1.82 2.02 2.23 2.41 4 0.19 0.22 0.26 0.29 0.31 0.34 0.24 0.29 0.34 0.38 0.41 0.44 0.31 0.38 0.43 0.48 0.53 0.56 0.36 0.44 0.51 0.58 0.63 0.68 0.48 0.60 0.68 0.77 0.84 0.90 0.60 0.73 0.85 0.95 1.04 1.13 0.72 0.89 1.02 1.14 1.24 1.35 0.97 1.18 1.36 1.52 1.67 1.81 2 1 2 5 0.15 0.18 0.20 0.23 0.25 0.27 0.19 0.23 0.27 0.30 0.33 0.35 0.25 0.30 0.34 0.38 0.42 0.45 0.29 0.35 0.41 0.46 0.50 0.55 0.38 0.48 0.55 0.61 0.67 0.72 0.48 0.59 0.68 0.76 0.83 0.90 0.57 0.71 0.82 0.91 1.00 1.08 0.78 0.94 1.09 1.21 1.34 1.45 3 1. Non-Air Inducted; Pre-orifice design for excellent performance with suspension solutions 2. Dual component construction 3. Material: Polyacetal or PVDF BROADCAST SPRAY NOZZLES See www.hyprospraytips.com/certifications for the latest drift reduction standard information. 110° wide, drift reducing design that is excellent for suspension based tank mixes. Pre-orifice design limits the formation of small droplets; reducing drift potential with a medium droplet spectrum. Metric Units ASABE Nozzle Droplet Size Pressure Flow Rate Size (BAR) (LPM) 80º 110º M M 2 0,49 M M 015 3 0,60 F M 4 0,69 C M 2 0,65 02 M F 3 0,80 F M 4 0,92 M 2 0,82 M 025 3 1,00 F 4 1,15 C M 2 0,98 C M 03 3 1,20 M M 4 1,39 C M 2 1,31 C M 04 3 1,60 M M 4 1,85 C C 2 1,63 C M 05 3 2,00 C M 4 2,31 VC C 2 1,96 C M 3 2,40 06 C M 4 2,77 VC C 2 2,61 C VC 08 3 3,20 C M 4 3,70 Droplet size based on ASABE S572.1 standard. Application Rate L/Ha - 50 cm spacing KM/H 7 84 103 118 111 137 158 141 171 197 168 206 238 225 274 317 279 343 396 336 411 475 447 549 634 8 74 90 104 98 120 138 123 150 173 147 180 209 197 240 278 245 300 347 294 360 416 392 480 555 10 59 72 83 78 96 110 98 120 138 118 144 167 157 192 222 196 240 277 235 288 332 313 384 444 12 49 60 69 65 80 92 82 100 115 98 120 139 131 160 185 163 200 231 196 240 277 261 320 370 15 39 48 55 52 64 74 66 80 92 78 96 111 105 128 148 130 160 185 157 192 222 209 256 296 20 29 36 41 39 48 55 49 60 69 59 72 83 79 96 111 98 120 139 118 144 166 157 192 222 Drift Reduction Standards 25 24 29 33 31 38 44 39 48 55 47 58 67 63 77 89 78 96 111 94 115 133 125 154 178 30 20 24 28 26 32 37 33 40 46 39 48 56 52 64 74 65 80 92 78 96 111 104 128 148 LERAP Features Common Use Plant Health Pattern Tapered Flat Fan Technology Pre-Orifice Material Polyacetal Spray Angle 80º & 110º Pressure Range 20-70 PSI (1-5 BAR) Configuration Nozzles, FastCap Optimum Boom Height 75% + 2.0-3.0 BAR 80° - 15" (35 cm) Spacing 22" (56 cm) 80° - 20" (50 cm) Spacing 30" (76 cm) 110° - 15" (35 cm) Spacing 15" (35 cm) 110° - 20" (50 cm) Spacing 20" (50 cm) Part Numbers Nozzles 80º Caps (25 Packs) LD80-015 CAP00-015 LD80-02 CAP00-02 LD80-03 CAP00-03 LD80-04 CAP00-04 LD80-05 CAP00-05 LD80-06 CAP00-06 LD80-08 CAP00-08 Nozzles 110º Caps (25 Packs) LD110-015 CAP00-015 LD110-02 CAP00-02 LD110-025* CAP00-025 LD110-03 CAP00-03 LD110-04* CAP00-04 LD110-05* CAP00-05 LD110-06* CAP00-06 LD110-08 CAP00-08 *Approved by JKI 147 Ceramic ADI 110 o The Albuz® ADI anti-drift spray nozzle provides a versatile balance of drift reduction and target coverage. The proven pre-orifice design creates droplets that are well suited for a wide range of spray applications. The ceramic orifice resists wear better than other materials and will provide acre after acre of service. • Droplet size balances drift reduction and target coverage • Simple and effective pre-orifice design • Versatile and long-lasting nozzle US Units Nozzle Droplet Pressure Flow Rate Size Size (PSI) (GPM) 01 015 02 03 04 M M F F F M M M M M M M M M M C M M M M VC C C C M 30 40 50 60 70 30 40 50 60 70 30 40 50 60 70 30 40 50 60 70 30 40 50 60 70 0.09 0.10 0.11 0.12 0.13 0.13 0.15 0.17 0.18 0.20 0.17 0.20 0.22 0.24 0.26 0.26 0.30 0.34 0.37 0.40 0.35 0.40 0.45 0.49 0.53 4 6.7 7.4 8.2 8.9 9.7 9.7 11.1 12.6 13.4 14.9 12.6 14.9 16.3 17.8 19.3 19.3 22.3 25.2 27.5 29.7 26.0 29.7 33.4 36.4 39.4 5 5.3 5.9 6.5 7.1 7.7 7.7 8.9 10.1 10.7 11.9 10.1 11.9 13.1 14.3 15.4 15.4 17.8 20.2 22.0 23.8 20.8 23.8 26.7 29.1 31.5 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 15 4.5 5.0 5.4 5.9 6.4 6.4 7.4 8.4 8.9 9.9 8.4 9.9 10.9 11.9 12.9 12.9 14.9 16.8 18.3 19.8 17.3 19.8 22.3 24.3 26.2 3.3 3.7 4.1 4.5 4.8 4.8 5.6 6.3 6.7 7.4 6.3 7.4 8.2 8.9 9.7 9.7 11.1 12.6 13.7 14.9 13.0 14.9 16.7 18.2 19.7 2.7 3.0 3.3 3.6 3.9 3.9 4.5 5.0 5.3 5.9 5.0 5.9 6.5 7.1 7.7 7.7 8.9 10.1 11.0 11.9 10.4 11.9 13.4 14.6 15.7 2.2 2.5 2.7 3.0 3.2 3.2 3.7 4.2 4.5 5.0 4.2 5.0 5.4 5.9 6.4 6.4 7.4 8.4 9.2 9.9 8.7 9.9 11.1 12.1 13.1 GAL/1000 Ft 1.8 2.0 2.2 2.4 2.6 2.6 3.0 3.4 3.6 4.0 3.4 4.0 4.4 4.8 5.1 5.1 5.9 6.7 7.3 7.9 6.9 7.9 8.9 9.7 10.5 20 1.3 1.5 1.6 1.8 1.9 1.9 2.2 2.5 2.7 3.0 2.5 3.0 3.3 3.6 3.9 3.9 4.5 5.0 5.5 5.9 5.2 5.9 6.7 7.3 7.9 2 0.31 0.34 0.38 0.41 0.44 0.44 0.51 0.58 0.61 0.68 0.58 0.68 0.75 0.82 0.89 0.89 1.02 1.16 1.26 1.36 1.19 1.36 1.53 1.67 1.81 3 0.20 0.23 0.25 0.27 0.30 0.30 0.34 0.39 0.41 0.45 0.39 0.45 0.50 0.55 0.59 0.59 0.68 0.77 0.84 0.91 0.80 0.91 1.02 1.11 1.20 Droplet size based on ASABE S572.1 standard. Metric Units Nozzle Droplet Pressure Flow Rate Size Size (PSI) (L/min) 6 F 2 0.33 87 F 3 0.40 105 01 F 4 0.46 121 VF 5 0.52 137 F 2 0.49 129 F 3 0.60 158 02 F 4 0.69 182 F 5 0.77 203 M 2 0.65 171 M 3 0.80 211 03 F 4 0.92 242 F 5 1.03 271 M 2 0.98 258 M 3 1.20 316 04 M 4 1.39 366 F 5 1.55 408 M 2 1.31 345 M 3 1.60 421 05 M 4 1.85 487 M 5 2.07 545 M 2 1.96 516 M 3 2.40 632 06 M 4 2.77 729 M 5 3.10 816 Droplet size based on ASABE S572.1 standard. 8 65 79 91 103 97 118 136 152 128 158 182 203 193 237 274 306 259 316 365 409 387 474 547 612 Gallons per Acre 20 inch nozzle spacing MPH 10 12 14 16 18 20 52 63 73 82 77 95 109 122 103 126 145 163 155 189 219 245 207 253 292 327 309 379 437 489 43 53 61 68 64 79 91 101 86 105 121 136 129 158 183 204 172 211 243 272 258 316 364 408 37 45 52 59 55 68 78 87 73 90 104 116 111 135 157 175 148 180 209 233 221 271 312 350 33 39 45 51 48 59 68 76 64 79 91 102 97 118 137 153 129 158 183 204 193 237 273 306 29 35 40 46 43 53 61 68 57 70 81 90 86 105 122 136 115 140 162 182 172 211 243 272 26 32 36 41 39 47 54 61 51 63 73 81 77 95 110 122 103 126 146 163 155 189 219 245 25 21 25 29 33 31 38 44 49 41 51 58 65 62 76 88 98 83 101 117 131 124 152 175 196 2 20 inch nozzle spacing 30 17 21 24 27 26 32 36 41 34 42 48 54 52 63 73 82 69 84 97 109 103 126 146 163 4 0.15 0.17 0.19 0.20 0.22 0.22 0.26 0.29 0.31 0.34 0.29 0.34 0.38 0.41 0.44 0.44 0.51 0.58 0.63 0.68 0.60 0.68 0.77 0.84 0.90 Features 5 0.12 0.14 0.15 0.16 0.18 0.18 0.20 0.23 0.25 0.27 0.23 0.27 0.30 0.33 0.35 0.35 0.41 0.46 0.50 0.55 0.48 0.55 0.61 0.67 0.72 Common Use Plant Health Pattern Tapered Flat Fan Technology Air Induction Material Ceramic Pressure Range 30-70 PSI (2-5 BAR) Configuration Nozzles 110º Optimum Boom Height 15" (35 cm) Spacing 15" (35 cm) 20" (50 cm) Spacing 20" (50 cm) Part Numbers Nozzles 110º Caps (25 Pack) ADI-11001 CAP00-01 ADI-110015 CAP00-015 ADI-11002 CAP00-02 ADI-11003 CAP00-03 ADI-11004 CAP00-04 Albuz® is a registered trademark of SAINT-GOBAIN SOLCERA, SAINT GOBAIN CERAMIQUES AVANCEES DESMARQUEST, CERAMIQUES TECHNIQUES DESMARQUEST, and SOCIETE DESMARQUEST ET CEC.. Hypro® is a registered trademark of Pentair. 148 Select the right nozzle sized for your application • Choose ‘Select by Application’ for a full list of nozzles that fit your application requirements • Choose ‘Select by Chemical’ (US only) for a recommended nozzle family based on the chemical you are using • Search for a specific nozzle or chemical directly from the home screen • Integrated Where to Buy tool makes purchasing easy • Available in US and Metric Units and multiple languages Search ‘SprayIT’ on the Apple Store or Android Market SprayIt Online Calculator The SprayIT Calculator is an easy-to-use tool that will help you find the right spray nozzle for your desired application. Simply answer a few questions about your specific application and we’ll supply you the best nozzles for that application. This tool is available on the Hypro website or as a mobile app available for both Apple and Android devices. sprayit.hyprospraytips.com 149 BROADCAST SPRAY NOZZLES SprayIT Mobile App Variable Pressure 80 & 110 o o Variable Pressure nozzle maintain a consistent spray angle over a wide pressure range down to 20 PSI (1 BAR) and are available in 80° and 110° versions to work with different boom heights. • Adjustable droplet size according to pressure • Maintains good spray distribution and makes larger droplets at low pressures • FastCap includes nozzle, cap and gasket • Excellent nozzle for a wide variety of herbicide and insecticide applications US Units Nozzle Droplet Size Pressure Flow Rate Size 80º 110º (PSI) (GPM) 20 0.11 F F 30 0.13 F F 40 0.15 015 F F 50 0.17 F F 60 0.18 VF VF 70 0.20 20 0.14 F F 30 0.17 F F 40 0.20 02 F F 50 0.22 F F 60 0.24 F F 70 0.26 M 20 0.18 F 30 0.22 F 40 0.25 025 F 50 0.28 F 60 0.31 F 70 0.33 M M 20 0.21 M F 30 0.26 F F 40 0.30 03 F F 50 0.34 F F 60 0.37 F F 70 0.40 20 0.25 M M 30 0.30 F 40 0.35 035 F 50 0.39 F 60 0.43 F 70 0.46 C M 20 0.28 M M 30 0.35 M F 40 0.40 04 F F 50 0.45 F F 60 0.49 F F 70 0.53 C M 20 0.35 C M 30 0.43 M F 40 0.50 05 M F 50 0.56 M F 60 0.61 F 70 0.66 M C 20 0.42 M C M 30 0.52 M M 40 0.60 06 M F 50 0.67 M F 60 0.73 M F 70 0.79 C 20 0.57 M 30 0.69 M 40 0.80 08 M 50 0.89 M 60 0.98 F 70 1.06 C 20 0.71 M 30 0.87 M 40 1.00 10 M 50 1.12 M 60 1.22 F 70 1.32 C 20 1.06 C 30 1.30 M 40 1.50 15 M 50 1.68 M 60 1.84 M 70 1.98 Droplet size based on ASABE S572.1 standard. 4 8.2 9.7 11.1 12.6 13.4 14.9 10.4 12.6 14.9 16.3 17.8 19.3 13.4 16.3 18.6 20.8 23.0 24.5 15.6 19.3 22.3 25.2 27.5 29.7 18.6 22.3 26.0 29.0 31.9 34.2 20.8 26.0 29.7 33.4 36.4 39.4 26.0 31.9 37.1 41.6 45.3 49.0 31.2 38.6 44.6 49.7 54.2 58.7 42.3 51.2 59.4 66.1 72.8 78.7 52.7 64.6 74.3 83.2 90.6 98.0 78.7 96.5 111 125 137 147 5 6.5 7.7 8.9 10.1 10.7 11.9 8.3 10.1 11.9 13.1 14.3 15.4 10.7 13.1 14.9 16.6 18.4 19.6 12.5 15.4 17.8 20.2 22.0 23.8 14.9 17.8 20.8 23.2 25.5 27.3 16.6 20.8 23.8 26.7 29.1 31.5 20.8 25.5 29.7 33.3 36.2 39.2 24.9 30.9 35.6 39.8 43.4 46.9 33.9 41.0 47.5 52.9 58.2 63.0 42.2 51.7 59.4 66.5 72.5 78.4 63.0 77.2 89.1 99.8 109 118 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 5.4 6.4 7.4 8.4 8.9 9.9 6.9 8.4 9.9 10.9 11.9 12.9 8.9 10.9 12.4 13.9 15.3 16.3 10.4 12.9 14.9 16.8 18.3 19.8 12.4 14.9 17.3 19.3 21.3 22.8 13.9 17.3 19.8 22.3 24.3 26.2 17.3 21.3 24.8 27.7 30.2 32.7 20.8 25.7 29.7 33.2 36.1 39.1 28.2 34.2 39.6 44.1 48.5 52.5 35.1 43.1 49.5 55.4 60.4 65.3 52.5 64.4 74.3 83.2 91.1 98.0 4.1 4.8 5.6 6.3 6.7 7.4 5.2 6.3 7.4 8.2 8.9 9.7 6.7 8.2 9.3 10.4 11.5 12.3 7.8 9.7 11.1 12.6 13.7 14.9 9.3 11.1 13.0 14.5 16.0 17.1 10.4 13.0 14.9 16.7 18.2 19.7 13.0 16.0 18.6 20.8 22.6 24.5 15.6 19.3 22.3 24.9 27.1 29.3 21.2 25.6 29.7 33.0 36.4 39.4 26.4 32.3 37.1 41.6 45.3 49.0 39.4 48.3 55.7 62.4 68.3 73.5 3.3 3.9 4.5 5.0 5.3 5.9 4.2 5.0 5.9 6.5 7.1 7.7 5.3 6.5 7.4 8.3 9.2 9.8 6.2 7.7 8.9 10.1 11.0 11.9 7.4 8.9 10.4 11.6 12.8 13.7 8.3 10.4 11.9 13.4 14.6 15.7 10.4 12.8 14.9 16.6 18.1 19.6 12.5 15.4 17.8 19.9 21.7 23.5 16.9 20.5 23.8 26.4 29.1 31.5 21.1 25.8 29.7 33.3 36.2 39.2 31.5 38.6 44.6 49.9 54.6 58.8 2.7 3.2 3.7 4.2 4.5 5.0 3.5 4.2 5.0 5.4 5.9 6.4 4.5 5.4 6.2 6.9 7.7 8.2 5.2 6.4 7.4 8.4 9.2 9.9 6.2 7.4 8.7 9.7 10.6 11.4 6.9 8.7 9.9 11.1 12.1 13.1 8.7 10.6 12.4 13.9 15.1 16.3 10.4 12.9 14.9 16.6 18.1 19.6 14.1 17.1 19.8 22.0 24.3 26.2 17.6 21.5 24.8 27.7 30.2 32.7 26.2 32.2 37.1 41.6 45.5 49.0 150 GAL/1000Ft 20 inch nozzle spacing 2 3 4 5 2 15 2.2 2.6 3.0 3.4 3.6 4.0 2.8 3.4 4.0 4.4 4.8 5.1 3.6 4.4 5.0 5.5 6.1 6.5 4.2 5.1 5.9 6.7 7.3 7.9 5.0 5.9 6.9 7.7 8.5 9.1 5.5 6.9 7.9 8.9 9.7 10.5 6.9 8.5 9.9 11.1 12.1 13.1 8.3 10.3 11.9 13.3 14.5 15.6 11.3 13.7 15.8 17.6 19.4 21.0 14.1 17.2 19.8 22.2 24.2 26.1 21.0 25.7 29.7 33.3 36.4 39.2 20 1.6 1.9 2.2 2.5 2.7 3.0 2.1 2.5 3.0 3.3 3.6 3.9 2.7 3.3 3.7 4.2 4.6 4.9 3.1 3.9 4.5 5.0 5.5 5.9 3.7 4.5 5.2 5.8 6.4 6.8 4.2 5.2 5.9 6.7 7.3 7.9 5.2 6.4 7.4 8.3 9.1 9.8 6.2 7.7 8.9 9.9 10.8 11.7 8.5 10.2 11.9 13.2 14.6 15.7 10.5 12.9 14.9 16.6 18.1 19.6 15.7 19.3 22.3 24.9 27.3 29.4 0.38 0.44 0.51 0.58 0.61 0.68 0.48 0.58 0.68 0.75 0.82 0.89 0.61 0.75 0.85 0.95 1.06 1.13 0.72 0.89 1.02 1.16 1.26 1.36 0.85 1.02 1.19 1.33 1.47 1.57 0.95 1.19 1.36 1.53 1.67 1.81 1.19 1.47 1.71 1.91 2.08 2.25 1.43 1.77 2.05 2.28 2.49 2.69 1.94 2.35 2.73 3.03 3.34 3.61 2.42 2.97 3.41 3.82 4.16 4.50 3.61 4.43 5.12 5.73 6.27 6.75 0.25 0.30 0.34 0.39 0.41 0.45 0.32 0.39 0.45 0.50 0.55 0.59 0.41 0.50 0.57 0.64 0.70 0.75 0.48 0.59 0.68 0.77 0.84 0.91 0.57 0.68 0.80 0.89 0.98 1.05 0.64 0.80 0.91 1.02 1.11 1.20 0.80 0.98 1.14 1.27 1.39 1.50 0.95 1.18 1.36 1.52 1.66 1.80 1.30 1.57 1.82 2.02 2.23 2.41 1.61 1.98 2.27 2.55 2.77 3.00 2.41 2.96 3.41 3.82 4.18 4.50 0.19 0.22 0.26 0.29 0.31 0.34 0.24 0.29 0.34 0.38 0.41 0.44 0.31 0.38 0.43 0.48 0.53 0.56 0.36 0.44 0.51 0.58 0.63 0.68 0.43 0.51 0.60 0.66 0.73 0.78 0.48 0.60 0.68 0.77 0.84 0.90 0.60 0.73 0.85 0.95 1.04 1.13 0.72 0.89 1.02 1.14 1.24 1.35 0.97 1.18 1.36 1.52 1.67 1.81 1.21 1.48 1.71 1.91 2.08 2.25 1.81 2.22 2.56 2.86 3.14 3.38 0.15 0.18 0.20 0.23 0.25 0.27 0.19 0.23 0.27 0.30 0.33 0.35 0.25 0.30 0.34 0.38 0.42 0.45 0.29 0.35 0.41 0.46 0.50 0.55 0.34 0.41 0.48 0.53 0.59 0.63 0.38 0.48 0.55 0.61 0.67 0.72 0.48 0.59 0.68 0.76 0.83 0.90 0.57 0.71 0.82 0.91 1.00 1.08 0.78 0.94 1.09 1.21 1.34 1.45 0.97 1.19 1.36 1.53 1.66 1.80 1.45 1.77 2.05 2.29 2.51 2.70 3 1 2 1. Non-Air Inducted; single inlet/ outlet design 2. Fully formed spray pattern at low pressures 3. Enhanced polyacetal for superior product life BROADCAST SPRAY NOZZLES Low pressure performance allows for complete pattern formation and even coverage down to 15 psi (1 BAR). Dense spray pattern of medium to fine droplets provides superior coverage. Metric Units Nozzle Size 015 02 025 03 035 04 05 06 08 10 15 ASEBE Droplet Size 80º 110º F F F VF F F F F C M M F F F C C M M F F C C C M M M C C C M M M - F F F VF F F F F M M F F F F M M F F F F M M M F F F M M M F F F M M M F F F C M M M F F C C M M M F C C M M M F VC C C M M M Pressure Flow Rate (BAR) (LPM) 1 1,5 2 3 4 5 1 1,5 2 3 4 5 1 1,5 2 3 4 5 1 1,5 2 3 4 5 1 1,5 2 3 4 5 1 1,5 2 3 4 5 1 1,5 2 3 4 5 1 1,5 2 3 4 5 1 1,5 2 3 4 5 1 1,5 2 3 4 5 1 1,5 2 3 4 5 0,35 0,42 0,49 0,60 0,69 0,77 0,46 0,57 0,65 0,80 0,92 1,03 0,58 0,71 0,82 1,00 1,15 1,29 0,69 0,85 0,98 1,20 1,39 1,55 0,81 0,99 1,14 1,40 1,62 1,81 0,92 1,13 1,31 1,60 1,85 2,07 1,15 1,41 1,63 2,00 2,31 2,58 1,39 1,70 1,96 2,40 2,77 3,10 1,85 2,26 2,61 3,20 3,70 4,13 2,31 2,83 3,27 4,00 4,62 5,16 3,46 4,24 4,90 6,00 6,93 7,75 7 60 72 84 103 118 132 79 98 111 137 158 177 99 122 141 171 197 221 118 146 168 206 238 266 139 170 195 240 278 310 158 194 225 274 317 355 197 242 279 343 396 442 238 291 336 411 475 531 317 387 447 549 634 708 396 485 561 686 792 885 593 727 840 1029 1188 1329 8 53 63 74 90 104 116 69 86 98 120 138 155 87 107 123 150 173 194 104 128 147 180 209 233 122 149 171 210 243 272 138 170 197 240 278 311 173 212 245 300 347 387 209 255 294 360 416 465 278 339 392 480 555 620 347 425 491 600 693 774 519 636 735 900 1040 1163 Application Rate L/Ha -50 cm spacing KM/H 10 12 15 20 42 50 59 72 83 92 55 68 78 96 110 124 70 85 98 120 138 155 83 102 118 144 167 186 97 119 137 168 194 217 110 136 157 192 222 248 138 169 196 240 277 310 167 204 235 288 332 372 222 271 313 384 444 496 277 340 392 480 554 619 415 509 588 720 832 930 35 42 49 60 69 77 46 57 65 80 92 103 58 71 82 100 115 129 69 85 98 120 139 155 81 99 114 140 162 181 92 113 131 160 185 207 115 141 163 200 231 258 139 170 196 240 277 310 185 226 261 320 370 413 231 283 327 400 462 516 346 424 490 600 693 775 28 34 39 48 55 62 37 46 52 64 74 82 46 57 66 80 92 103 55 68 78 96 111 124 65 79 91 112 130 145 74 90 105 128 148 166 92 113 130 160 185 206 111 136 157 192 222 248 148 181 209 256 296 330 185 226 262 320 370 413 277 339 392 480 554 620 21 25 29 36 41 46 28 34 39 48 55 62 35 43 49 60 69 77 41 51 59 72 83 93 49 59 68 84 97 109 55 68 79 96 111 124 69 85 98 120 139 155 83 102 118 144 166 186 111 136 157 192 222 248 139 170 196 240 277 310 208 254 294 360 416 465 Droplet size based on ASABE S572.1 standard. Features 25 17 20 24 29 33 37 22 27 31 38 44 49 28 34 39 48 55 62 33 41 47 58 67 74 39 48 55 67 78 87 44 54 63 77 89 99 55 68 78 96 111 124 67 82 94 115 133 149 89 108 125 154 178 198 111 136 157 192 222 248 166 204 235 288 333 372 30 14 17 20 24 28 31 18 23 26 32 37 41 23 28 33 40 46 52 28 34 39 48 56 62 32 40 46 56 65 72 37 45 52 64 74 83 46 56 65 80 92 103 56 68 78 96 111 124 74 90 104 128 148 165 92 113 131 160 185 206 138 170 196 240 277 310 Common Use General Pattern Tapered Flat Fan Technology Elliptical Orifice Material Polyacetal Spray Angle 80º & 110º Pressure Range 20-70 PSI (1-5 BAR) Configuration Nozzles, FastCap Optimum Boom Height 80° - 15" (35 cm) Spacing 22" (56 cm) 80° - 20" (50 cm) Spacing 30" (76 cm) 110° - 15" (35 cm) Spacing 15" (35 cm) 110° - 20" (50 cm) Spacing 20" (50 cm) Part Numbers Nozzles 80º FastCaps 80º VP80-015 FC-VP80-015 VP80-02 FC-VP80-02 VP80-03 FC-VP80-03 VP80-04 FC-VP80-04 VP80-05 FC-VP80-05 VP80-06 FC-VP80-06 Nozzles 110º FastCaps 110º VP110-015 FC-VP110-015 VP110-02 FC-VP110-02 VP110-025 FC-VP110-025 VP110-03* FC-VP110-03 VP110-035 FC-VP110-035 VP110-04* FC-VP110-04 VP110-05* FC-VP110-05 VP110-06 FC-VP110-06 VP110-08 FC-VP110-08 VP110-10 FC-VP110-10 VP110-15 FC-VP110-15 Replacement Cap Gasket 22W11MF64 *Approved by JKI 151 Total Range 80 & 110 o o The TR (Total Range) nozzle series consists of a metal insert that is held in a plastic carrier. The nozzles are able to maintain a constant spray angle over a wide pressure range down to 20 psi (1 bar). • Adjustable droplet size according to pressure • Insert is precision-machined stainless steel and carrier is molded in tough and durable polyacetal • Maintains good spray distribution and makes larger droplets at low pressures • FastCap includes nozzle, cap and gasket • Excellent nozzle for insecticide and fungicide applications US Units Nozzle Size 01 015 02 03 04 05 06 08 10 15 Droplet Pressure Flow Size Rate (PSI) (GPM) 80º 110º F F VF VF VF VF F F F F VF VF M F F F F VF M M F F F F C M M M F F C C M M M F C C M M M M C C C C M M VC VC C C C M VC VC C C C C F F VF VF VF VF F F F F F VF M F F F F F M M F F F F M M F F F F C M F F F F C C M M M F C C M M M M VC C M M M M VC VC C C M M 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 0.07 0.09 0.10 0.11 0.12 0.13 0.11 0.13 0.15 0.17 0.18 0.20 0.14 0.17 0.20 0.22 0.24 0.26 0.21 0.26 0.30 0.34 0.37 0.40 0.28 0.35 0.40 0.45 0.49 0.53 0.35 0.43 0.50 0.56 0.61 0.66 0.42 0.52 0.60 0.67 0.73 0.79 0.57 0.69 0.80 0.89 0.98 1.06 0.71 0.87 1.00 1.12 1.22 1.32 1.06 1.30 1.50 1.68 1.84 1.98 4 5.2 6.7 7.4 8.2 8.9 9.7 8.2 9.7 11.1 12.6 13.4 14.9 10.4 12.6 14.9 16.3 17.8 19.3 15.6 19.3 22.3 25.2 27.5 29.7 20.8 26.0 29.7 33.4 36.4 39.4 26.0 31.9 37.1 41.6 45.3 49.0 31.2 38.6 44.6 49.7 54.2 58.7 42.3 51.2 59.4 66.1 72.8 78.7 52.7 64.6 74.3 83.2 90.6 98.0 78.7 96.5 111 125 137 147 5 4.2 5.3 5.9 6.5 7.1 7.7 6.5 7.7 8.9 10.1 10.7 11.9 8.3 10.1 11.9 13.1 14.3 15.4 12.5 15.4 17.8 20.2 22.0 23.8 16.6 20.8 23.8 26.7 29.1 31.5 20.8 25.5 29.7 33.3 36.2 39.2 24.9 30.9 35.6 39.8 43.4 46.9 33.9 41.0 47.5 52.9 58.2 63.0 42.2 51.7 59.4 66.5 72.5 78.4 63.0 77.2 89.1 99.8 109 118 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 15 3.5 4.5 5.0 5.4 5.9 6.4 5.4 6.4 7.4 8.4 8.9 9.9 6.9 8.4 9.9 10.9 11.9 12.9 10.4 12.9 14.9 16.8 18.3 19.8 13.9 17.3 19.8 22.3 24.3 26.2 17.3 21.3 24.8 27.7 30.2 32.7 20.8 25.7 29.7 33.2 36.1 39.1 28.2 34.2 39.6 44.1 48.5 52.5 35.1 43.1 49.5 55.4 60.4 65.3 52.5 64.4 74.3 83.2 91.1 98.0 2.6 3.3 3.7 4.1 4.5 4.8 4.1 4.8 5.6 6.3 6.7 7.4 5.2 6.3 7.4 8.2 8.9 9.7 7.8 9.7 11.1 12.6 13.7 14.9 10.4 13.0 14.9 16.7 18.2 19.7 13.0 16.0 18.6 20.8 22.6 24.5 15.6 19.3 22.3 24.9 27.1 29.3 21.2 25.6 29.7 33.0 36.4 39.4 26.4 32.3 37.1 41.6 45.3 49.0 39.4 48.3 55.7 62.4 68.3 73.5 2.1 2.7 3.0 3.3 3.6 3.9 3.3 3.9 4.5 5.0 5.3 5.9 4.2 5.0 5.9 6.5 7.1 7.7 6.2 7.7 8.9 10.1 11.0 11.9 8.3 10.4 11.9 13.4 14.6 15.7 10.4 12.8 14.9 16.6 18.1 19.6 12.5 15.4 17.8 19.9 21.7 23.5 16.9 20.5 23.8 26.4 29.1 31.5 21.1 25.8 29.7 33.3 36.2 39.2 31.5 38.6 44.6 49.9 54.6 58.8 1.7 2.2 2.5 2.7 3.0 3.2 2.7 3.2 3.7 4.2 4.5 5.0 3.5 4.2 5.0 5.4 5.9 6.4 5.2 6.4 7.4 8.4 9.2 9.9 6.9 8.7 9.9 11.1 12.1 13.1 8.7 10.6 12.4 13.9 15.1 16.3 10.4 12.9 14.9 16.6 18.1 19.6 14.1 17.1 19.8 22.0 24.3 26.2 17.6 21.5 24.8 27.7 30.2 32.7 26.2 32.2 37.1 41.6 45.5 49.0 Droplet size based on ASABE S572.1 standard. 152 1.4 1.8 2.0 2.2 2.4 2.6 2.2 2.6 3.0 3.4 3.6 4.0 2.8 3.4 4.0 4.4 4.8 5.1 4.2 5.1 5.9 6.7 7.3 7.9 5.5 6.9 7.9 8.9 9.7 10.5 6.9 8.5 9.9 11.1 12.1 13.1 8.3 10.3 11.9 13.3 14.5 15.6 11.3 13.7 15.8 17.6 19.4 21.0 14.1 17.2 19.8 22.2 24.2 26.1 21.0 25.7 29.7 33.3 36.4 39.2 GAL/1000 Ft 20 inch nozzle spacing 2 3 4 5 2 20 1.0 1.3 1.5 1.6 1.8 1.9 1.6 1.9 2.2 2.5 2.7 3.0 2.1 2.5 3.0 3.3 3.6 3.9 3.1 3.9 4.5 5.0 5.5 5.9 4.2 5.2 5.9 6.7 7.3 7.9 5.2 6.4 7.4 8.3 9.1 9.8 6.2 7.7 8.9 9.9 10.8 11.7 8.5 10.2 11.9 13.2 14.6 15.7 10.5 12.9 14.9 16.6 18.1 19.6 15.7 19.3 22.3 24.9 27.3 29.4 0.24 0.31 0.34 0.38 0.41 0.44 0.38 0.44 0.51 0.58 0.61 0.68 0.48 0.58 0.68 0.75 0.82 0.89 0.72 0.89 1.02 1.16 1.26 1.36 0.95 1.19 1.36 1.53 1.67 1.81 1.19 1.47 1.71 1.91 2.08 2.25 1.43 1.77 2.05 2.28 2.49 2.69 1.94 2.35 2.73 3.03 3.34 3.61 2.42 2.97 3.41 3.82 4.16 4.50 3.61 4.43 5.12 5.73 6.27 6.75 0.16 0.20 0.23 0.25 0.27 0.30 0.25 0.30 0.34 0.39 0.41 0.45 0.32 0.39 0.45 0.50 0.55 0.59 0.48 0.59 0.68 0.77 0.84 0.91 0.64 0.80 0.91 1.02 1.11 1.20 0.80 0.98 1.14 1.27 1.39 1.50 0.95 1.18 1.36 1.52 1.66 1.80 1.30 1.57 1.82 2.02 2.23 2.41 1.61 1.98 2.27 2.55 2.77 3.00 2.41 2.96 3.41 3.82 4.18 4.50 0.12 0.15 0.17 0.19 0.20 0.22 0.19 0.22 0.26 0.29 0.31 0.34 0.24 0.29 0.34 0.38 0.41 0.44 0.36 0.44 0.51 0.58 0.63 0.68 0.48 0.60 0.68 0.77 0.84 0.90 0.60 0.73 0.85 0.95 1.04 1.13 0.72 0.89 1.02 1.14 1.24 1.35 0.97 1.18 1.36 1.52 1.67 1.81 1.21 1.48 1.71 1.91 2.08 2.25 1.81 2.22 2.56 2.86 3.14 3.38 0.10 0.12 0.14 0.15 0.16 0.18 0.15 0.18 0.20 0.23 0.25 0.27 0.19 0.23 0.27 0.30 0.33 0.35 0.29 0.35 0.41 0.46 0.50 0.55 0.38 0.48 0.55 0.61 0.67 0.72 0.48 0.59 0.68 0.76 0.83 0.90 0.57 0.71 0.82 0.91 1.00 1.08 0.78 0.94 1.09 1.21 1.34 1.45 0.97 1.19 1.36 1.53 1.66 1.80 1.45 1.77 2.05 2.29 2.51 2.70 2 1 3 3 1. Non-Air Inducted; single inlet/ outlet design 2. Stainless Steel insert available in a wide flow range 3. Available in a Fastcap option for easy installation BROADCAST SPRAY NOZZLES 80° or 110° wide spray pattern producing a smaller droplet spectrum with a stainless steel orifice. Dense spray pattern of smaller droplets to match many insecticide and fungicide applications. Metric Units Nozzle Size 01 015 02 03 04 05 06 08 10 15 Droplet Size 80º 110º M F F VF VF VF M F F F VF VF M F F F F VF C M M F F F C M M M F F C C C M M F C C C M M M VC C C C M M VC VC VC C C M XC VC VC C C C F F F VF VF VF M F F F F VF M F F F F F M M M F F F C M M F F F C M M F F F C C C M M F C C C M M M VC C C M M M VC VC VC C M M Pressure Flow Rate (BAR) (LPM) 1 1.5 2 3 4 5 1 1.5 2 3 4 5 1 1.5 2 3 4 5 1 1.5 2 3 4 5 1 1.5 2 3 4 5 1 1.5 2 3 4 5 1 1.5 2 3 4 5 1 1.5 2 3 4 5 1 1.5 2 3 4 5 1 1.5 2 3 4 5 0.23 0.28 0.33 0.40 0.46 0.52 0.35 0.42 0.49 0.60 0.69 0.77 0.46 0.57 0.65 0.80 0.92 1.03 0.69 0.85 0.98 1.20 1.39 1.55 0.92 1.13 1.31 1.60 1.85 2.07 1.15 1.41 1.63 2.00 2.31 2.58 1.39 1.70 1.96 2.40 2.77 3.10 1.85 2.26 2.61 3.20 3.70 4.13 2.31 2.83 3.27 4.00 4.62 5.16 3.46 4.24 4.90 6.00 6.93 7.75 7 39 48 57 69 79 89 60 72 84 103 118 132 79 98 111 137 158 177 118 146 168 206 238 266 158 194 225 274 317 355 197 242 279 343 396 442 238 291 336 411 475 531 317 387 447 549 634 708 396 485 561 686 792 885 593 727 840 1029 1188 1329 8 35 42 50 60 69 78 53 63 74 90 104 116 69 86 98 120 138 155 104 128 147 180 209 233 138 170 197 240 278 311 173 212 245 300 347 387 209 255 294 360 416 465 278 339 392 480 555 620 347 425 491 600 693 774 519 636 735 900 1040 1163 Application Rate L/Ha - 50 cm spacing KM/H 10 12 15 20 28 34 40 48 55 62 42 50 59 72 83 92 55 68 78 96 110 124 83 102 118 144 167 186 110 136 157 192 222 248 138 169 196 240 277 310 167 204 235 288 332 372 222 271 313 384 444 496 277 340 392 480 554 619 415 509 588 720 832 930 23 28 33 40 46 52 35 42 49 60 69 77 46 57 65 80 92 103 69 85 98 120 139 155 92 113 131 160 185 207 115 141 163 200 231 258 139 170 196 240 277 310 185 226 261 320 370 413 231 283 327 400 462 516 346 424 490 600 693 775 18 22 26 32 37 42 28 34 39 48 55 62 37 46 52 64 74 82 55 68 78 96 111 124 74 90 105 128 148 166 92 113 130 160 185 206 111 136 157 192 222 248 148 181 209 256 296 330 185 226 262 320 370 413 277 339 392 480 554 620 14 17 20 24 28 31 21 25 29 36 41 46 28 34 39 48 55 62 41 51 59 72 83 93 55 68 79 96 111 124 69 85 98 120 139 155 83 102 118 144 166 186 111 136 157 192 222 248 139 170 196 240 277 310 208 254 294 360 416 465 Droplet size based on ASABE S572.1 standard. Features 25 11 13 16 19 22 25 17 20 24 29 33 37 22 27 31 38 44 49 33 41 47 58 67 74 44 54 63 77 89 99 55 68 78 96 111 124 67 82 94 115 133 149 89 108 125 154 178 198 111 136 157 192 222 248 166 204 235 288 333 372 30 9 11 13 16 18 21 14 17 20 24 28 31 18 23 26 32 37 41 28 34 39 48 56 62 37 45 52 64 74 83 46 56 65 80 92 103 56 68 78 96 111 124 74 90 104 128 148 165 92 113 131 160 185 206 138 170 196 240 277 310 Common Use General Pattern Tapered Flat Fan Technology Elliptical Orifice Material Stainless Steel Spray Angle 80º & 110º Pressure Range 20-70 PSI (1-5 BAR) Configuration Nozzles, FastCap Optimum Boom Height 80° - 15" (35 cm) Spacing 22" (56 cm) 80° - 20" (50 cm) Spacing 30" (76 cm) 110° - 15" (35 cm) Spacing 15" (35 cm) 110° - 20" (50 cm) Spacing 20" (50 cm) Part Numbers Nozzles 80º FastCaps 80º TR80-01 FC-TR80-01 TR80-015 FC-TR80-015 TR80-02 FC-TR80-02 TR80-03 FC-TR80-03 TR80-04 FC-TR80-04 TR80-05 FC-TR80-05 TR80-06 FC-TR80-06 TR80-08 FC-TR80-08 TR80-10* FC-TR80-10* TR80-15* FC-TR80-15* Nozzles 110º FastCaps 110º TR110-01 FC-TR110-01 TR110-015 FC-TR110-015 TR110-02 FC-TR110-02 TR110-03 FC-TR110-03 TR110-04 FC-TR110-04 TR110-05 FC-TR110-05 TR110-06 FC-TR110-06 TR110-08 FC-TR110-08 TR110-10* FC-TR110-10* TR110-15* FC-TR110-15* Replacement Cap Gasket 22W11MF64 * All stainless steel nozzles 153 Ceramic AXI 80 & 110 o o The Albuz® AXI wide pressure range ceramic spray nozzles are suited for creating numerous fine to medium droplets. The ceramic orifice of the AXI will provide long service life even when spraying abrasive chemicals. • Adjustable droplet size according to pressure • Maintains good spray distribution and makes larger droplets at low pressures • FastCap includes nozzle, cap and gasket • 80º fan models ideal for use in directed spray applications (See page 180 for more information) US Units Nozzle Size 015 02 03 04 05 06 Droplet Pressure Flow Size Rate (PSI) (GPM) 80º 110º F F F F VF VF F F F F F F M M M F F F M M M M F F M M M M M M M M M M M M F F F F F F F F F F F F M F F F F F M M F F F F M M F F F F M M M F F F 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 0.11 0.13 0.15 0.17 0.18 0.20 0.14 0.17 0.20 0.22 0.24 0.26 0.21 0.26 0.30 0.34 0.37 0.40 0.28 0.35 0.40 0.45 0.49 0.53 0.35 0.43 0.50 0.56 0.61 0.66 0.42 0.52 0.60 0.67 0.73 0.79 4 8.2 9.7 11.1 12.6 13.4 14.9 10.4 12.6 14.9 16.3 17.8 19.3 15.6 19.3 22.3 25.2 27.5 29.7 20.8 26.0 29.7 33.4 36.4 39.4 26.0 31.9 37.1 41.6 45.3 49.0 31.2 38.6 44.6 49.7 54.2 58.7 Gallons per Acre 20 inch nozzle spacing MPH 5 6 8 10 12 15 6.5 7.7 8.9 10.1 10.7 11.9 8.3 10.1 11.9 13.1 14.3 15.4 12.5 15.4 17.8 20.2 22.0 23.8 16.6 20.8 23.8 26.7 29.1 31.5 20.8 25.5 29.7 33.3 36.2 39.2 24.9 30.9 35.6 39.8 43.4 46.9 5.4 6.4 7.4 8.4 8.9 9.9 6.9 8.4 9.9 10.9 11.9 12.9 10.4 12.9 14.9 16.8 18.3 19.8 13.9 17.3 19.8 22.3 24.3 26.2 17.3 21.3 24.8 27.7 30.2 32.7 20.8 25.7 29.7 33.2 36.1 39.1 4.1 4.8 5.6 6.3 6.7 7.4 5.2 6.3 7.4 8.2 8.9 9.7 7.8 9.7 11.1 12.6 13.7 14.9 10.4 13.0 14.9 16.7 18.2 19.7 13.0 16.0 18.6 20.8 22.6 24.5 15.6 19.3 22.3 24.9 27.1 29.3 3.3 3.9 4.5 5.0 5.3 5.9 4.2 5.0 5.9 6.5 7.1 7.7 6.2 7.7 8.9 10.1 11.0 11.9 8.3 10.4 11.9 13.4 14.6 15.7 10.4 12.8 14.9 16.6 18.1 19.6 12.5 15.4 17.8 19.9 21.7 23.5 2.7 3.2 3.7 4.2 4.5 5.0 3.5 4.2 5.0 5.4 5.9 6.4 5.2 6.4 7.4 8.4 9.2 9.9 6.9 8.7 9.9 11.1 12.1 13.1 8.7 10.6 12.4 13.9 15.1 16.3 10.4 12.9 14.9 16.6 18.1 19.6 2.2 2.6 3.0 3.4 3.6 4.0 2.8 3.4 4.0 4.4 4.8 5.1 4.2 5.1 5.9 6.7 7.3 7.9 5.5 6.9 7.9 8.9 9.7 10.5 6.9 8.5 9.9 11.1 12.1 13.1 8.3 10.3 11.9 13.3 14.5 15.6 GAL/1000 Ft 2 20 1.6 1.9 2.2 2.5 2.7 3.0 2.1 2.5 3.0 3.3 3.6 3.9 3.1 3.9 4.5 5.0 5.5 5.9 4.2 5.2 5.9 6.7 7.3 7.9 5.2 6.4 7.4 8.3 9.1 9.8 6.2 7.7 8.9 9.9 10.8 11.7 2 0.38 0.44 0.51 0.58 0.61 0.68 0.48 0.58 0.68 0.75 0.82 0.89 0.72 0.89 1.02 1.16 1.26 1.36 0.95 1.19 1.36 1.53 1.67 1.81 1.19 1.47 1.71 1.91 2.08 2.25 1.43 1.77 2.05 2.28 2.49 2.69 20 inch nozzle spacing 3 0.25 0.30 0.34 0.39 0.41 0.45 0.32 0.39 0.45 0.50 0.55 0.59 0.48 0.59 0.68 0.77 0.84 0.91 0.64 0.80 0.91 1.02 1.11 1.20 0.80 0.98 1.14 1.27 1.39 1.50 0.95 1.18 1.36 1.52 1.66 1.80 4 0.19 0.22 0.26 0.29 0.31 0.34 0.24 0.29 0.34 0.38 0.41 0.44 0.36 0.44 0.51 0.58 0.63 0.68 0.48 0.60 0.68 0.77 0.84 0.90 0.60 0.73 0.85 0.95 1.04 1.13 0.72 0.89 1.02 1.14 1.24 1.35 5 0.15 0.18 0.20 0.23 0.25 0.27 0.19 0.23 0.27 0.30 0.33 0.35 0.29 0.35 0.41 0.46 0.50 0.55 0.38 0.48 0.55 0.61 0.67 0.72 0.48 0.59 0.68 0.76 0.83 0.90 0.57 0.71 0.82 0.91 1.00 1.08 Droplet size based on ASABE S572.1 standard. Albuz® is a registered trademark of SAINT-GOBAIN SOLCERA, SAINT GOBAIN CERAMIQUES AVANCEES DESMARQUEST, CERAMIQUES TECHNIQUES DESMARQUEST, and SOCIETE DESMARQUEST ET CEC.. Hypro® is a registered trademark of Pentair. 154 BROADCAST SPRAY NOZZLES Metric Units Nozzle Size 015 02 03 04 05 06 Droplet Size 80º 110º F F F VF M F F F M M F F M M M F M M M M M M M M F F F F F F F F F F F F M F F F M F F F M M F F Pres- Flow sure Rate (BAR) (LPM) 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 0.49 0.60 0.69 0.77 0.65 0.80 0.92 1.03 0.98 1.20 1.39 1.55 1.31 1.60 1.85 2.07 1.63 2.00 2.31 2.58 1.96 2.40 2.77 3.10 6 129 158 182 203 171 211 242 271 258 316 366 408 345 421 487 545 429 526 608 679 516 632 729 816 8 97 118 136 152 128 158 182 203 193 237 274 306 259 316 365 409 322 395 456 509 387 474 547 612 Application Rate L/Ha - 50 cm spacing KM/H 10 12 14 16 18 20 77 95 109 122 103 126 145 163 155 189 219 245 207 253 292 327 257 316 365 407 309 379 437 489 64 79 91 101 86 105 121 136 129 158 183 204 172 211 243 272 214 263 304 339 258 316 364 408 55 68 78 87 73 90 104 116 111 135 157 175 148 180 209 233 184 226 261 291 221 271 312 350 48 59 68 76 64 79 91 102 97 118 137 153 129 158 183 204 161 197 228 255 193 237 273 306 43 53 61 68 57 70 81 90 86 105 122 136 115 140 162 182 143 175 203 226 172 211 243 272 Droplet size based on ASABE S572.1 standard. 39 47 54 61 51 63 73 81 77 95 110 122 103 126 146 163 129 158 182 204 155 189 219 245 Features 25 31 38 44 49 41 51 58 65 62 76 88 98 83 101 117 131 103 126 146 163 124 152 175 196 30 26 32 36 41 34 42 48 54 52 63 73 82 69 84 97 109 86 105 122 136 103 126 146 163 Common Use General Pattern Tapered Flat Fan Technology Elliptical Orifice Material Ceramic Spray Angle 80º & 110º Pressure Range 20-70 PSI (1.5-5 BAR) Configuration Nozzles, FastCap Optimum Boom Height 80° - 15" (35 cm) Spacing 22" (56 cm) 80° - 20" (50 cm) Spacing 30" (76 cm) 110° - 15" (35 cm) Spacing 15" (35 cm) 110° - 20" (50 cm) Spacing 20" (50 cm) Part Numbers Nozzles 80º FastCaps 80º AXI-80015 FC-AXI-80015 AXI-8002 FC-AXI-8002 AXI-8003 FC-AXI-8003 AXI-8004 FC-AXI-8004 AXI-8005 FC-AXI-8005 AXI-8006 FC-AXI-8006 Nozzles 110º FastCaps 110º AXI-110015 FC-AXI-110015 AXI-11002 FC-AXI-11002 AXI-110025 – AXI-11003 FC-AXI-11003 AXI-11004 FC-AXI-11004 AXI-11005 FC-AXI-11005 AXI-11006 FC-AXI-11006 Replacement Cap Gasket 22W11MF64 155 VPTech 80 & 110 o o One VP nozzle and a removable blanking insert in a standard TwinCap for 30º inclined spray. • Variable pressure nozzles maintain consistant spray angle over a wide pressure range down to 20 psi (1 bar) • Available in 80º and 110º versions to work at different boom heights • Alternate the direction of the incline along the boom for optimum coverage of vertical targets US Units Nozzle Droplet Size Pressure Flow Rate Size (PSI) (GPM) 80º 110º 02 025 03 035 04 05 06 F F F F F M M F F F F C M M F F F C C M M M M C C M M M M F F F F F M F F F F F M F F F F F M M F F F F M M F F F F M M F F F F M M M F F F 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 20 30 40 50 60 70 0.14 0.17 0.20 0.22 0.24 0.26 0.18 0.22 0.25 0.28 0.31 0.33 0.21 0.26 0.30 0.34 0.37 0.40 0.25 0.30 0.35 0.39 0.43 0.46 0.28 0.35 0.40 0.45 0.49 0.53 0.35 0.43 0.50 0.56 0.61 0.66 0.42 0.52 0.60 0.67 0.73 0.79 4 10.4 12.6 14.9 16.3 17.8 19.3 13.4 16.3 18.6 20.8 23.0 24.5 15.6 19.3 22.3 25.2 27.5 29.7 18.6 22.3 26.0 29.0 31.9 34.2 20.8 26.0 29.7 33.4 36.4 39.4 26.0 31.9 37.1 41.6 45.3 49.0 31.2 38.6 44.6 49.7 54.2 58.7 5 8.3 10.1 11.9 13.1 14.3 15.4 10.7 13.1 14.9 16.6 18.4 19.6 12.5 15.4 17.8 20.2 22.0 23.8 14.9 17.8 20.8 23.2 25.5 27.3 16.6 20.8 23.8 26.7 29.1 31.5 20.8 25.5 29.7 33.3 36.2 39.2 24.9 30.9 35.6 39.8 43.4 46.9 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 6.9 8.4 9.9 10.9 11.9 12.9 8.9 10.9 12.4 13.9 15.3 16.3 10.4 12.9 14.9 16.8 18.3 19.8 12.4 14.9 17.3 19.3 21.3 22.8 13.9 17.3 19.8 22.3 24.3 26.2 17.3 21.3 24.8 27.7 30.2 32.7 20.8 25.7 29.7 33.2 36.1 39.1 5.2 6.3 7.4 8.2 8.9 9.7 6.7 8.2 9.3 10.4 11.5 12.3 7.8 9.7 11.1 12.6 13.7 14.9 9.3 11.1 13.0 14.5 16.0 17.1 10.4 13.0 14.9 16.7 18.2 19.7 13.0 16.0 18.6 20.8 22.6 24.5 15.6 19.3 22.3 24.9 27.1 29.3 4.2 5.0 5.9 6.5 7.1 7.7 5.3 6.5 7.4 8.3 9.2 9.8 6.2 7.7 8.9 10.1 11.0 11.9 7.4 8.9 10.4 11.6 12.8 13.7 8.3 10.4 11.9 13.4 14.6 15.7 10.4 12.8 14.9 16.6 18.1 19.6 12.5 15.4 17.8 19.9 21.7 23.5 3.5 4.2 5.0 5.4 5.9 6.4 4.5 5.4 6.2 6.9 7.7 8.2 5.2 6.4 7.4 8.4 9.2 9.9 6.2 7.4 8.7 9.7 10.6 11.4 6.9 8.7 9.9 11.1 12.1 13.1 8.7 10.6 12.4 13.9 15.1 16.3 10.4 12.9 14.9 16.6 18.1 19.6 Droplet size based on ASABE S572.1 standard. 156 GAL/1000Ft 20 inch nozzle spacing 2 3 4 5 2 15 2.8 3.4 4.0 4.4 4.8 5.1 3.6 4.4 5.0 5.5 6.1 6.5 4.2 5.1 5.9 6.7 7.3 7.9 5.0 5.9 6.9 7.7 8.5 9.1 5.5 6.9 7.9 8.9 9.7 10.5 6.9 8.5 9.9 11.1 12.1 13.1 8.3 10.3 11.9 13.3 14.5 15.6 20 2.1 2.5 3.0 3.3 3.6 3.9 2.7 3.3 3.7 4.2 4.6 4.9 3.1 3.9 4.5 5.0 5.5 5.9 3.7 4.5 5.2 5.8 6.4 6.8 4.2 5.2 5.9 6.7 7.3 7.9 5.2 6.4 7.4 8.3 9.1 9.8 6.2 7.7 8.9 9.9 10.8 11.7 0.48 0.58 0.68 0.75 0.82 0.89 0.61 0.75 0.85 0.95 1.06 1.13 0.72 0.89 1.02 1.16 1.26 1.36 0.85 1.02 1.19 1.33 1.47 1.57 0.95 1.19 1.36 1.53 1.67 1.81 1.19 1.47 1.71 1.91 2.08 2.25 1.43 1.77 2.05 2.28 2.49 2.69 0.32 0.39 0.45 0.50 0.55 0.59 0.41 0.50 0.57 0.64 0.70 0.75 0.48 0.59 0.68 0.77 0.84 0.91 0.57 0.68 0.80 0.89 0.98 1.05 0.64 0.80 0.91 1.02 1.11 1.20 0.80 0.98 1.14 1.27 1.39 1.50 0.95 1.18 1.36 1.52 1.66 1.80 0.24 0.29 0.34 0.38 0.41 0.44 0.31 0.38 0.43 0.48 0.53 0.56 0.36 0.44 0.51 0.58 0.63 0.68 0.43 0.51 0.60 0.66 0.73 0.78 0.48 0.60 0.68 0.77 0.84 0.90 0.60 0.73 0.85 0.95 1.04 1.13 0.72 0.89 1.02 1.14 1.24 1.35 0.19 0.23 0.27 0.30 0.33 0.35 0.25 0.30 0.34 0.38 0.42 0.45 0.29 0.35 0.41 0.46 0.50 0.55 0.34 0.41 0.48 0.53 0.59 0.63 0.38 0.48 0.55 0.61 0.67 0.72 0.48 0.59 0.68 0.76 0.83 0.90 0.57 0.71 0.82 0.91 1.00 1.08 1 2 3 1. Inclined spray for vertical targets 2. Removable blanking insert 3. Fully formed spray pattern at low pressures BROADCAST SPRAY NOZZLES Low pressure performance allows for complete pattern formation and even coverage down to 15 psi (1 BAR). Inclined 30° spray pattern of medium to fine droplets provides superior coverage and canopy penetration. Metric Units Nozzle Size ASABE Flow Droplet Size Pressure Rate (BAR) (LPM) 80º 110º 1 0,46 1,5 0,57 02 F F 2 0,65 F F 3 0,80 F F 4 0,92 F F 5 1,03 M 1 0,58 M 1,5 0,71 025 F 2 0,82 F 3 1,00 F 4 1,15 F 5 1,29 C M 1 0,69 M M 1,5 0,85 03 M F 2 0,98 F F 3 1,20 F F 4 1,39 F F 5 1,55 M 1 0,81 M 1,5 0,99 035 M 2 1,14 F 3 1,40 F 4 1,62 F 5 1,81 C M 1 0,92 C M 1,5 1,13 04 M M 2 1,31 M F 3 1,60 F F 4 1,85 F F 5 2,07 C M 1 1,15 C M 1,5 1,41 05 C M 2 1,63 M F 3 2,00 M F 4 2,31 F 5 2,58 M C 1 1,39 C C M 1,5 1,70 06 C M 2 1,96 M M 3 2,40 M F 4 2,77 M F 5 3,10 Droplet size based on ASABE S572.1 standard. Application Rate L/Ha - 50 cm spacing KM/H 7 79 98 111 137 158 177 99 122 141 171 197 221 118 146 168 206 238 266 139 170 195 240 278 310 158 194 225 274 317 355 197 242 279 343 396 442 238 291 336 411 475 531 8 69 86 98 120 138 155 87 107 123 150 173 194 104 128 147 180 209 233 122 149 171 210 243 272 138 170 197 240 278 311 173 212 245 300 347 387 209 255 294 360 416 465 10 55 68 78 96 110 124 70 85 98 120 138 155 83 102 118 144 167 186 97 119 137 168 194 217 110 136 157 192 222 248 138 169 196 240 277 310 167 204 235 288 332 372 12 46 57 65 80 92 103 58 71 82 100 115 129 69 85 98 120 139 155 81 99 114 140 162 181 92 113 131 160 185 207 115 141 163 200 231 258 139 170 196 240 277 310 15 37 46 52 64 74 82 46 57 66 80 92 103 55 68 78 96 111 124 65 79 91 112 130 145 74 90 105 128 148 166 92 113 130 160 185 206 111 136 157 192 222 248 20 28 34 39 48 55 62 35 43 49 60 69 77 41 51 59 72 83 93 49 59 68 84 97 109 55 68 79 96 111 124 69 85 98 120 139 155 83 102 118 144 166 186 Features 25 22 27 31 38 44 49 28 34 39 48 55 62 33 41 47 58 67 74 39 48 55 67 78 87 44 54 63 77 89 99 55 68 78 96 111 124 67 82 94 115 133 149 30 18 23 26 32 37 41 23 28 33 40 46 52 28 34 39 48 56 62 32 40 46 56 65 72 37 45 52 64 74 83 46 56 65 80 92 103 56 68 78 96 111 124 Common Use General Pattern Tapered Flat Fan Technology Elliptical Orifice Material Polyacetal Spray Angle 80º & 110º Pressure Range 20-70 PSI (1-5 BAR) Configuration TwinCap Optimum Boom Height 80° - 15" (35 cm) Spacing 20" (51 cm) 80° - 20" (50 cm) Spacing 28" (71 cm) 110° - 15" (35 cm) Spacing 13" (33 cm) 110° - 20" (50 cm) Spacing 18" (46 cm) Part Numbers TwinCap 80º TwinCap 110º VPT80-02 VPT110-02 - VPT110-025 VPT80-03 VPT110-03 - VPT110-035 VPT80-04 VPT110-04 VPT80-05 VPT110-05 VPT80-06 VPT110-06 Replacement Parts VPTCAP Cap & Blanking Insert 30Q3834 Blanking Insert 22W11MF64 Cap Gasket Add suffix “-H” for Hardi compatible products 157 FanTip 80 & 110 o o The FanTip is a general spray nozzle that produces a mixed droplet spectrum over the 30-60 psi (2-4 bar) operational pressure range. It is good for broadcast applications. • Economical option for general spraying • Simple one-piece design • Polyacetal construction for superior product life compared to stainless steel or brass US Units Nozzle Droplet Size Pressure Flow Rate Size (PSI) (GPM) 80º 110º 0067 01 015 02 03 04 05 06 08 10 15 20 F VF VF VF VF VF VF VF F F F VF M F F F C M M F C M M M C M M M C C C C VC C C C VC C C C VC VC C C VC VC VC VC F F F VF F F F F F F F F F F F F M F F F M F F F M M F F M M M M C C C C C C C C C C C C 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 0.058 0.067 0.075 0.082 0.09 0.10 0.11 0.12 0.13 0.15 0.17 0.18 0.17 0.20 0.22 0.24 0.26 0.30 0.34 0.37 0.35 0.40 0.45 0.49 0.43 0.50 0.56 0.61 0.52 0.60 0.67 0.73 0.69 0.80 0.89 0.98 0.87 1.00 1.12 1.22 1.30 1.50 1.68 1.84 1.73 2.00 2.24 2.45 4 4.3 5.0 5.6 6.1 6.7 7.4 8.2 8.9 9.7 11.1 12.6 13.4 12.6 14.9 16.3 17.8 19.3 22.3 25.2 27.5 26.0 29.7 33.4 36.4 31.9 37.1 41.6 45.3 38.6 44.6 49.7 54.2 51.2 59.4 66.1 72.8 64.6 74.3 83.2 90.6 96.5 111 125 137 128 149 166 182 5 3.4 4.0 4.5 4.9 5.3 5.9 6.5 7.1 7.7 8.9 10.1 10.7 10.1 11.9 13.1 14.3 15.4 17.8 20.2 22.0 20.8 23.8 26.7 29.1 25.5 29.7 33.3 36.2 30.9 35.6 39.8 43.4 41.0 47.5 52.9 58.2 51.7 59.4 66.5 72.5 77.2 89.1 99.8 109 103 119 133 146 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 15 2.9 3.3 3.7 4.1 4.5 5.0 5.4 5.9 6.4 7.4 8.4 8.9 8.4 9.9 10.9 11.9 12.9 14.9 16.8 18.3 17.3 19.8 22.3 24.3 21.3 24.8 27.7 30.2 25.7 29.7 33.2 36.1 34.2 39.6 44.1 48.5 43.1 49.5 55.4 60.4 64.4 74.3 83.2 91.1 85.6 99.0 111 121 2.2 2.5 2.8 3.0 3.3 3.7 4.1 4.5 4.8 5.6 6.3 6.7 6.3 7.4 8.2 8.9 9.7 11.1 12.6 13.7 13.0 14.9 16.7 18.2 16.0 18.6 20.8 22.6 19.3 22.3 24.9 27.1 25.6 29.7 33.0 36.4 32.3 37.1 41.6 45.3 48.3 55.7 62.4 68.3 64.2 74.3 83.2 91.0 1.7 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.5 5.0 5.3 5.0 5.9 6.5 7.1 7.7 8.9 10.1 11.0 10.4 11.9 13.4 14.6 12.8 14.9 16.6 18.1 15.4 17.8 19.9 21.7 20.5 23.8 26.4 29.1 25.8 29.7 33.3 36.2 38.6 44.6 49.9 54.6 51.4 59.4 66.5 72.8 1.4 1.7 1.9 2.0 2.2 2.5 2.7 3.0 3.2 3.7 4.2 4.5 4.2 5.0 5.4 5.9 6.4 7.4 8.4 9.2 8.7 9.9 11.1 12.1 10.6 12.4 13.9 15.1 12.9 14.9 16.6 18.1 17.1 19.8 22.0 24.3 21.5 24.8 27.7 30.2 32.2 37.1 41.6 45.5 42.8 49.5 55.4 60.6 Droplet size based on ASABE S572.1 standard. 158 1.1 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.6 3.0 3.4 3.6 3.4 4.0 4.4 4.8 5.1 5.9 6.7 7.3 6.9 7.9 8.9 9.7 8.5 9.9 11.1 12.1 10.3 11.9 13.3 14.5 13.7 15.8 17.6 19.4 17.2 19.8 22.2 24.2 25.7 29.7 33.3 36.4 34.3 39.6 44.4 48.5 GAL/1000 Ft 20 0.9 1.0 1.1 1.2 1.3 1.5 1.6 1.8 1.9 2.2 2.5 2.7 2.5 3.0 3.3 3.6 3.9 4.5 5.0 5.5 5.2 5.9 6.7 7.3 6.4 7.4 8.3 9.1 7.7 8.9 9.9 10.8 10.2 11.9 13.2 14.6 12.9 14.9 16.6 18.1 19.3 22.3 24.9 27.3 25.7 29.7 33.3 36.4 2 0.20 0.23 0.26 0.28 0.31 0.34 0.38 0.41 0.44 0.51 0.58 0.61 0.58 0.68 0.75 0.82 0.89 1.02 1.16 1.26 1.19 1.36 1.53 1.67 1.47 1.71 1.91 2.08 1.77 2.05 2.28 2.49 2.35 2.73 3.03 3.34 2.97 3.41 3.82 4.16 4.43 5.12 5.73 6.27 5.90 6.82 7.64 8.35 2 20 inch nozzle spacing 3 0.13 0.15 0.17 0.19 0.20 0.23 0.25 0.27 0.30 0.34 0.39 0.41 0.39 0.45 0.50 0.55 0.59 0.68 0.77 0.84 0.80 0.91 1.02 1.11 0.98 1.14 1.27 1.39 1.18 1.36 1.52 1.66 1.57 1.82 2.02 2.23 1.98 2.27 2.55 2.77 2.96 3.41 3.82 4.18 3.93 4.55 5.09 5.57 4 0.10 0.11 0.13 0.14 0.15 0.17 0.19 0.20 0.22 0.26 0.29 0.31 0.29 0.34 0.38 0.41 0.44 0.51 0.58 0.63 0.60 0.68 0.77 0.84 0.73 0.85 0.95 1.04 0.89 1.02 1.14 1.24 1.18 1.36 1.52 1.67 1.48 1.71 1.91 2.08 2.22 2.56 2.86 3.14 2.95 3.41 3.82 4.18 5 0.08 0.09 0.10 0.11 0.12 0.14 0.15 0.16 0.18 0.20 0.23 0.25 0.23 0.27 0.30 0.33 0.35 0.41 0.46 0.50 0.48 0.55 0.61 0.67 0.59 0.68 0.76 0.83 0.71 0.82 0.91 1.00 0.94 1.09 1.21 1.34 1.19 1.36 1.53 1.66 1.77 2.05 2.29 2.51 2.36 2.73 3.06 3.34 1 2 3 1. Simple; Non-Air Inducted technology 2. Polyacetal; single piece design 3. Available in many sizes to meet your flow rate needs BROADCAST SPRAY NOZZLES 80° or 110° wide spray patterns; broad flow range and droplet spectrum to fit many spraying applications. Metric Units Nozzle Size ASABE Droplet Size 80º 110º Pressure Flow Rate (BAR) (LPM) 2 0,22 F VF 2,5 0,25 VF 3 0,27 VF 4 0,31 2 0,33 VF F VF F 2,5 0,37 01 VF F 3 0,40 VF VF 4 0,46 2 0,49 F F F F 2,5 0,55 015 F F 3 0,60 VF F 4 0,69 2 0,65 M F F F 2,5 0,73 02 F F 3 0,80 F F 4 0,92 2 0,98 C F M F 2,5 1,10 03 M F 3 1,20 F F 4 1,39 2 1,31 C M M F 2,5 1,46 04 M F 3 1,60 M F 4 1,85 2 1,63 C M M M 2,5 1,83 05 M F 3 2,00 M F 4 2,31 2 1,96 C M C M 2,5 2,19 06 C M 3 2,40 C 4 2,77 F M 2 2,61 VC C M 2,5 2,92 08 C M 3 3,20 C M 4 3,70 2 3,27 VC C C C 2,5 3,65 10 C C 3 4,00 C C 4 4,62 2 4,90 VC C VC C 2,5 5,48 15 VC C 3 6,00 C C 4 6,93 2 6,53 VC C VC C 2,5 7,30 20 VC C 3 8,00 VC C 4 9,24 Droplet size based on ASABE S572.1 standard. 0067 7 38 43 46 53 57 63 69 79 84 94 103 118 111 125 137 158 168 189 206 238 225 250 274 317 279 314 343 396 336 375 411 475 447 501 549 634 561 626 686 792 840 939 1029 1188 1119 1251 1371 1584 Polyacetal construction provides a wear resistant orifice to ensure pattern integrity. 8 33 38 41 47 50 56 60 69 74 83 90 104 98 110 120 138 147 165 180 209 197 219 240 278 245 275 300 347 294 329 360 416 392 438 480 555 491 548 600 693 735 822 900 1040 980 1095 1200 1386 Application Rate L/Ha- 50 cm Spacing KM/H 10 12 15 20 25 26 30 32 37 40 44 48 55 59 66 72 83 78 88 96 110 118 132 144 167 157 175 192 222 196 220 240 277 235 263 288 332 313 350 384 444 392 438 480 554 588 658 720 832 784 876 960 1109 22 25 27 31 33 37 40 46 49 55 60 69 65 73 80 92 98 110 120 139 131 146 160 185 163 183 200 231 196 219 240 277 261 292 320 370 327 365 400 462 490 548 600 693 653 730 800 924 18 20 22 25 26 30 32 37 39 44 48 55 52 58 64 74 78 88 96 111 105 117 128 148 130 146 160 185 157 175 192 222 209 234 256 296 262 292 320 370 392 438 480 554 522 584 640 739 13 15 16 19 20 22 24 28 29 33 36 41 39 44 48 55 59 66 72 83 79 88 96 111 98 110 120 139 118 131 144 166 157 175 192 222 196 219 240 277 294 329 360 416 392 438 480 554 159 11 12 13 15 16 18 19 22 24 26 29 33 31 35 38 44 47 53 58 67 63 70 77 89 78 88 96 111 94 105 115 133 125 140 154 178 157 175 192 222 235 263 288 333 313 350 384 444 Features 30 9 10 11 12 13 15 16 18 20 22 24 28 26 29 32 37 39 44 48 56 52 58 64 74 65 73 80 92 78 88 96 111 104 117 128 148 131 146 160 185 196 219 240 277 261 292 320 370 Common Use General Pattern Tapered Flat Fan Technology Elliptical Orifice Material Polyacetal Spray Angle 80º & 110º Pressure Range 30-60 PSI (2-4 BAR) Configuration Nozzle Optimum Boom Height 80° - 15" (35 cm) Spacing 22" (56 cm) 80° - 20" (50 cm) Spacing 30" (76 cm) 110° - 15" (35 cm) Spacing 15" (35 cm) 110° - 20" (50 cm) Spacing 20" (50 cm) Part Numbers Nozzles 80º Nozzles 110º Caps (25 Pack) F80-0067 - CAP00-20 F80-01 F110-01 CAP00-01 F80-015 F110-015 CAP00-015 F80-02 F110-02 CAP00-02 F80-03 F110-03 CAP00-03 F80-04 F110-04 CAP00-04 F80-05 F110-05 CAP00-05 F80-06 F110-06 CAP00-06 F80-08 F110-08 CAP00-08 F80-10 F110-10 CAP00-10 F80-15 F110-15 CAP00-15 F80-20 F110-20 CAP00-20 Hi-Flow 140 o The Hypro® Hi-Flow nozzle is the best way to outfit a sprayer to achieve wide-angle coverage plus drift control. The 140° pattern ensures unmatched uniformity across the spray boom and allows lower spray heights to reduce the risk of drift during sensitive applications. • Frequently used with fertilizer/herbicide mixtures for early season weed control • Straight-through design to reduce clogging and drift • Incredibly uniform application across the boom • Lower spray heights and pre-orifice technology reduce drift • PWM compatable 1 US Units Nozzle Droplet Pressure Flow Rate Size Size (PSI) (GPM) 08 10 15 20 30 40 50 60 UC UC UC UC XC XC XC UC UC UC UC XC XC XC UC UC UC UC XC XC XC UC UC UC UC XC XC XC UC UC UC UC XC XC XC UC UC UC UC XC XC XC UC UC UC UC XC XC XC UC UC UC UC XC XC XC 20 30 40 50 60 70 80 20 30 40 50 60 70 80 20 30 40 50 60 70 80 20 30 40 50 60 70 80 20 30 40 50 60 70 80 20 30 40 50 60 70 80 20 30 40 50 60 70 80 20 30 40 50 60 70 80 0.57 0.69 0.80 0.89 0.98 1.06 1.13 0.71 0.87 1.00 1.12 1.22 1.32 1.41 1.06 1.30 1.50 1.68 1.84 1.98 2.12 1.41 1.73 2.00 2.24 2.45 2.65 2.83 2.12 2.60 3.00 3.35 3.67 3.97 4.24 2.83 3.46 4.00 4.47 4.90 5.29 5.66 3.54 4.33 5.00 5.59 6.12 6.61 7.07 4.24 5.20 6.00 6.71 7.35 7.94 8.49 4 42.3 51.2 59.4 66.1 72.8 78.7 83.9 52.7 64.6 74.3 83.2 90.6 98.0 105 78.7 96.5 111 125 137 147 157 105 128 149 166 182 197 210 157 193 223 249 272 295 315 210 257 297 332 364 393 420 263 322 371 415 454 491 525 315 386 446 498 546 590 630 5 33.9 41.0 47.5 52.9 58.2 63.0 67.1 42.2 51.7 59.4 66.5 72.5 78.4 83.8 63.0 77.2 89.1 99.8 109 118 126 83.8 103 119 133 146 157 168 126 154 178 199 218 236 252 168 206 238 266 291 314 336 210 257 297 332 364 393 420 252 309 356 399 437 472 504 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 15 28.2 34.2 39.6 44.1 48.5 52.5 55.9 35.1 43.1 49.5 55.4 60.4 65.3 69.8 52.5 64.4 74.3 83.2 91.1 98.0 105 69.8 85.6 99.0 111 121 131 140 105 129 149 166 182 197 210 140 171 198 221 243 262 280 175 214 248 277 303 327 350 210 257 297 332 364 393 420 21.2 25.6 29.7 33.0 36.4 39.4 42.0 26.4 32.3 37.1 41.6 45.3 49.0 52.3 39.4 48.3 55.7 62.4 68.3 73.5 78.7 52.3 64.2 74.3 83.2 91.0 98.4 105 78.7 96.5 111 124 136 147 157 105 128 149 166 182 196 210 131 161 186 208 227 245 262 157 193 223 249 273 295 315 16.9 20.5 23.8 26.4 29.1 31.5 33.6 21.1 25.8 29.7 33.3 36.2 39.2 41.9 31.5 38.6 44.6 49.9 54.6 58.8 63.0 41.9 51.4 59.4 66.5 72.8 78.7 84.1 63.0 77.2 89.1 99.5 109 118 126 84.1 103 119 133 146 157 168 105 129 149 166 182 196 210 126 154 178 199 218 236 252 14.1 17.1 19.8 22.0 24.3 26.2 28.0 17.6 21.5 24.8 27.7 30.2 32.7 34.9 26.2 32.2 37.1 41.6 45.5 49.0 52.5 34.9 42.8 49.5 55.4 60.6 65.6 70.0 52.5 64.4 74.3 82.9 90.8 98.3 105 70.0 85.6 99.0 111 121 131 140 87.6 107 124 138 151 164 175 105 129 149 166 182 197 210 11.3 13.7 15.8 17.6 19.4 21.0 22.4 14.1 17.2 19.8 22.2 24.2 26.1 27.9 21.0 25.7 29.7 33.3 36.4 39.2 42.0 27.9 34.3 39.6 44.4 48.5 52.5 56.0 42.0 51.5 59.4 66.3 72.7 78.6 84.0 56.0 68.5 79.2 88.5 97.0 105 112 70.1 85.7 99.0 111 121 131 140 84.0 103 119 133 146 157 168 GAL/1000Ft 20 8.5 10.2 11.9 13.2 14.6 15.7 16.8 10.5 12.9 14.9 16.6 18.1 19.6 20.9 15.7 19.3 22.3 24.9 27.3 29.4 31.5 20.9 25.7 29.7 33.3 36.4 39.4 42.0 31.5 38.6 44.6 49.7 54.5 59.0 63.0 42.0 51.4 59.4 66.4 72.8 78.6 84.1 52.6 64.3 74.3 83.0 90.9 98.2 105 63.0 77.2 89.1 99.6 109 118 126 2 1.94 2.35 2.73 3.03 3.34 3.61 3.85 2.42 2.97 3.41 3.82 4.16 4.50 4.81 3.61 4.43 5.12 5.73 6.27 6.75 7.23 4.81 5.90 6.82 7.64 8.35 9.04 9.65 7.23 8.87 10.2 11.4 12.5 13.5 14.5 9.65 11.8 13.6 15.2 16.7 18.0 19.3 12.1 14.8 17.1 19.1 20.9 22.5 24.1 14.5 17.7 20.5 22.9 25.1 27.1 29.0 2 20 inch nozzle spacing 3 1.30 1.57 1.82 2.02 2.23 2.41 2.57 1.61 1.98 2.27 2.55 2.77 3.00 3.21 2.41 2.96 3.41 3.82 4.18 4.50 4.82 3.21 3.93 4.55 5.09 5.57 6.02 6.43 4.82 5.91 6.82 7.62 8.34 9.03 9.64 6.43 7.87 9.09 10.2 11.1 12.0 12.9 8.05 9.84 11.4 12.7 13.9 15.0 16.1 9.64 11.8 13.6 15.3 16.7 18.1 19.3 4 0.97 1.18 1.36 1.52 1.67 1.81 1.93 1.21 1.48 1.71 1.91 2.08 2.25 2.40 1.81 2.22 2.56 2.86 3.14 3.38 3.61 2.40 2.95 3.41 3.82 4.18 4.52 4.83 3.61 4.43 5.12 5.71 6.26 6.77 7.23 4.83 5.90 6.82 7.62 8.35 9.02 9.65 6.04 7.38 8.53 9.53 10.4 11.3 12.1 7.23 8.87 10.2 11.4 12.5 13.5 14.5 5 0.78 0.94 1.09 1.21 1.34 1.45 1.54 0.97 1.19 1.36 1.53 1.66 1.80 1.92 1.45 1.77 2.05 2.29 2.51 2.70 2.89 1.92 2.36 2.73 3.06 3.34 3.61 3.86 2.89 3.55 4.09 4.57 5.01 5.42 5.78 3.86 4.72 5.46 6.10 6.68 7.22 7.72 4.83 5.91 6.82 7.62 8.35 9.02 9.64 5.78 7.09 8.18 9.15 10.0 10.8 11.6 3 1. Straight flow design for superior resistance to plugging and creation of driftable droplets 2. Unitized spray nozzle design for easy single piece operation 3. Removable pre-orifice for easy cleaning Droplet size based on ASABE S572.1 standard. Floater Adapter for Hi-Flow Nozzles Part Number Description 9950-0001 Floater Adapter Kit for Hi-Flow Nozzles (3/4" Cam Lock to Bayonet) 160 2 Metric Units Nozzle Droplet Pressure Flow Rate Size Size (BAR) (LPM) 08 10 15 20 30 40 50 60 UC UC UC UC XC XC XC UC UC UC UC XC XC XC UC UC UC UC XC XC XC UC UC UC UC XC XC XC UC UC UC UC XC XC XC UC UC UC UC XC XC XC UC UC UC UC XC XC XC UC UC UC UC XC XC XC 1,5 2 2,5 3 4 5 6 1,5 2 2,5 3 4 5 6 1,5 2 2,5 3 4 5 6 1,5 2 2,5 3 4 5 6 1,5 2 2,5 3 4 5 6 1,5 2 2,5 3 4 5 6 1,5 2 2,5 3 4 5 6 1,5 2 2,5 3 4 5 6 2,26 2,61 2,92 3,20 3,70 4,13 4,53 2,8 3,3 3,7 4,0 4,6 5,2 5,7 4,2 4,9 5,5 6,0 6,9 7,7 8,5 5,7 6,5 7,3 8,0 9,2 10,3 11,3 8,5 9,8 11,0 12,0 13,9 15,5 17,0 11,3 13,1 14,6 16,0 18,5 20,7 22,6 14,1 16,3 18,3 20,0 23,1 25,8 28,3 17,0 19,6 21,9 24,0 27,7 31,0 33,9 7 387 447 501 549 634 708 777 480 566 634 686 789 891 977 720 840 943 1029 1183 1320 1457 977 1114 1251 1371 1577 1766 1937 1457 1680 1886 2057 2383 2657 2914 1937 2246 2503 2743 3171 3549 3874 2417 2794 3137 3429 3960 4423 4851 2914 3360 3754 4114 4749 5314 5811 8 339 392 438 480 555 620 680 420 495 555 600 690 780 855 630 735 825 900 1035 1155 1275 855 975 1095 1200 1380 1545 1695 1275 1470 1650 1800 2085 2325 2550 1695 1965 2190 2400 2775 3105 3390 2115 2445 2745 3000 3465 3870 4245 2550 2940 3285 3600 4155 4650 5085 BROADCAST WIDE-ANGLE SPRAY NOZZLES 140° wide, large droplet spray pattern for industry leading coverage of liquid fertilizers. Straight through design squeezes fluid flow to create the spray pattern versus deflecting fluid flow and creating un-needed spray drift. Application Rate L/Ha - 50 cm Spacing KM/H 10 12 15 20 271 313 350 384 444 496 544 336 396 444 480 552 624 684 504 588 660 720 828 924 1020 684 780 876 960 1104 1236 1356 1020 1176 1320 1440 1668 1860 2040 1356 1572 1752 1920 2220 2484 2712 1692 1956 2196 2400 2772 3096 3396 2040 2352 2628 2880 3324 3720 4068 226 261 292 320 370 413 453 280 330 370 400 460 520 570 420 490 550 600 690 770 850 570 650 730 800 920 1030 1130 850 980 1100 1200 1390 1550 1700 1130 1310 1460 1600 1850 2070 2260 1410 1630 1830 2000 2310 2580 2830 1700 1960 2190 2400 2770 3100 3390 181 209 234 256 296 330 362 224 264 296 320 368 416 456 336 392 440 480 552 616 680 456 520 584 640 736 824 904 680 784 880 960 1112 1240 1360 904 1048 1168 1280 1480 1656 1808 1128 1304 1464 1600 1848 2064 2264 1360 1568 1752 1920 2216 2480 2712 136 157 175 192 222 248 272 168 198 222 240 276 312 342 252 294 330 360 414 462 510 342 390 438 480 552 618 678 510 588 660 720 834 930 1020 678 786 876 960 1110 1242 1356 846 978 1098 1200 1386 1548 1698 1020 1176 1314 1440 1662 1860 2034 Droplet size based on ASABE S572.1 standard. 161 Features 25 108 125 140 154 178 198 217 134 158 178 192 221 250 274 202 235 264 288 331 370 408 274 312 350 384 442 494 542 408 470 528 576 667 744 816 542 629 701 768 888 994 1085 677 782 878 960 1109 1238 1358 816 941 1051 1152 1330 1488 1627 30 90 104 117 128 148 165 181 112 132 148 160 184 208 228 168 196 220 240 276 308 340 228 260 292 320 368 412 452 340 392 440 480 556 620 680 452 524 584 640 740 828 904 564 652 732 800 924 1032 1132 680 784 876 960 1108 1240 1356 Common Use Fertilizer Pattern Tapered Flat Fan Technology Pre-Orifice Material Polyacetal Spray Angle 140º Pressure Range 20-80 PSI (1.5-6 BAR) Configuration FastCap Optimum Boom Height 15" (35 cm) Spacing 10" (25 cm) 20" (50 cm) Spacing 12" (30 cm) Part Numbers FastCaps 140º HF140-08 HF140-10 HF140-15 HF140-20 HF140-30 HF140-40 HF140-50 HF140-60 Replacement Cap Gasket 65-BS205 DeflecTip 80 -160 o o The DeflecTip wide-angle flood fan nozzle creates a wide pattern at very low pressures while creating mainly medium and coarse droplets. It is well suited for mounting on machinery where a wide angle or a low spray height is desired and on sprayers using very low pressures, including manual sprayers. • Sprays at very low pressures • Medium to coarse spray is suited for a variety of applications • Larger sizes are suitable for liquid fertilizer applications • Large circular orifice reduces the chances of blocking • For use of single nozzles with knapsack/backpack sprayers (See page 200) US Units Nozzle Droplet Spray Pressure Flow Rate Size Size Angle (PSI) (GPM) @45 psi 0.5 0.75 1.0 1.5 2.0 2.5 3.0 4.0 5.0 7.5 10 15 20 VC M F F F F XC M M F F F C M F F F F VC M M F F F M M M F F F C M M M F F C M M M M M M M M M M F M M M M F F C C C C C M C M M M M M C C C C C M VC C C C C C 80º 95º 105º 105º 105º 110º 110º 120º 125º 145º 160º 145º 140º 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 0.05 0.07 0.09 0.10 0.11 0.12 0.08 0.11 0.13 0.15 0.17 0.18 0.10 0.14 0.17 0.20 0.22 0.24 0.15 0.21 0.26 0.30 0.34 0.37 0.20 0.28 0.35 0.40 0.45 0.49 0.25 0.35 0.43 0.50 0.56 0.61 0.30 0.42 0.52 0.60 0.67 0.73 0.40 0.57 0.69 0.80 0.89 0.98 0.50 0.71 0.87 1.00 1.12 1.22 0.75 1.06 1.30 1.50 1.68 1.84 1.00 1.41 1.73 2.00 2.24 2.45 1.50 2.12 2.60 3.00 3.35 3.67 2.00 2.83 3.46 4.00 4.47 4.90 Droplet size based on ASABE S572.1 standard. 4 3.7 5.3 6.4 7.4 8.3 9.1 5.6 7.9 9.6 11.1 12.5 13.6 7.4 10.5 12.9 14.9 16.6 18.2 11.1 15.8 19.3 22.3 24.9 27.3 14.9 21.0 25.7 29.7 33.2 36.4 18.6 26.3 32.2 37.1 41.5 45.5 22.3 31.5 38.6 44.6 49.8 54.6 29.7 42.0 51.4 59.4 66.4 72.7 37.1 52.5 64.3 74.3 83.0 90.9 55.7 78.8 96.5 111.4 124.5 136.4 74.3 105.0 128.6 148.5 166.0 181.9 111.4 157.5 192.9 222.8 249.0 272.8 148.5 210.0 257.2 297.0 332.1 363.7 5 3.0 4.2 5.1 5.9 6.6 7.3 4.5 6.3 7.7 8.9 10.0 10.9 5.9 8.4 10.3 11.9 13.3 14.5 8.9 12.6 15.4 17.8 19.9 21.8 11.9 16.8 20.6 23.8 26.6 29.1 14.9 21.0 25.7 29.7 33.2 36.4 17.8 25.2 30.9 35.6 39.8 43.6 23.8 33.6 41.2 47.5 53.1 58.2 29.7 42.0 51.4 59.4 66.4 72.7 44.6 63.0 77.2 89.1 99.6 109.1 59.4 84.0 102.9 118.8 132.8 145.5 89.1 126.0 154.3 178.2 199.2 218.2 118.8 168.0 205.8 237.6 265.6 291.0 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 15 2.5 3.5 4.3 5.0 5.5 6.1 3.7 5.3 6.4 7.4 8.3 9.1 5.0 7.0 8.6 9.9 11.1 12.1 7.4 10.5 12.9 14.9 16.6 18.2 9.9 14.0 17.1 19.8 22.1 24.2 12.4 17.5 21.4 24.8 27.7 30.3 14.9 21.0 25.7 29.7 33.2 36.4 19.8 28.0 34.3 39.6 44.3 48.5 24.8 35.0 42.9 49.5 55.3 60.6 37.1 52.5 64.3 74.3 83.0 90.9 49.5 70.0 85.7 99.0 110.7 121.2 74.3 105.0 128.6 148.5 166.0 181.9 99.0 140.0 171.5 198.0 221.4 242.5 1.9 2.6 3.2 3.7 4.2 4.5 2.8 3.9 4.8 5.6 6.2 6.8 3.7 5.3 6.4 7.4 8.3 9.1 5.6 7.9 9.6 11.1 12.5 13.6 7.4 10.5 12.9 14.9 16.6 18.2 9.3 13.1 16.1 18.6 20.8 22.7 11.1 15.8 19.3 22.3 24.9 27.3 14.9 21.0 25.7 29.7 33.2 36.4 18.6 26.3 32.2 37.1 41.5 45.5 27.8 39.4 48.2 55.7 62.3 68.2 37.1 52.5 64.3 74.3 83.0 90.9 55.7 78.8 96.5 111.4 124.5 136.4 74.3 105.0 128.6 148.5 166.0 181.9 1.5 2.1 2.6 3.0 3.3 3.6 2.2 3.2 3.9 4.5 5.0 5.5 3.0 4.2 5.1 5.9 6.6 7.3 4.5 6.3 7.7 8.9 10.0 10.9 5.9 8.4 10.3 11.9 13.3 14.5 7.4 10.5 12.9 14.9 16.6 18.2 8.9 12.6 15.4 17.8 19.9 21.8 11.9 16.8 20.6 23.8 26.6 29.1 14.9 21.0 25.7 29.7 33.2 36.4 22.3 31.5 38.6 44.6 49.8 54.6 29.7 42.0 51.4 59.4 66.4 72.7 44.6 63.0 77.2 89.1 99.6 109.1 59.4 84.0 102.9 118.8 132.8 145.5 1.2 1.8 2.1 2.5 2.8 3.0 1.9 2.6 3.2 3.7 4.2 4.5 2.5 3.5 4.3 5.0 5.5 6.1 3.7 5.3 6.4 7.4 8.3 9.1 5.0 7.0 8.6 9.9 11.1 12.1 6.2 8.8 10.7 12.4 13.8 15.2 7.4 10.5 12.9 14.9 16.6 18.2 9.9 14.0 17.1 19.8 22.1 24.2 12.4 17.5 21.4 24.8 27.7 30.3 18.6 26.3 32.2 37.1 41.5 45.5 24.8 35.0 42.9 49.5 55.3 60.6 37.1 52.5 64.3 74.3 83.0 90.9 49.5 70.0 85.7 99.0 110.7 121.2 162 1.0 1.4 1.7 2.0 2.2 2.4 1.5 2.1 2.6 3.0 3.3 3.6 2.0 2.8 3.4 4.0 4.4 4.8 3.0 4.2 5.1 5.9 6.6 7.3 4.0 5.6 6.9 7.9 8.9 9.7 5.0 7.0 8.6 9.9 11.1 12.1 5.9 8.4 10.3 11.9 13.3 14.5 7.9 11.2 13.7 15.8 17.7 19.4 9.9 14.0 17.1 19.8 22.1 24.2 14.9 21.0 25.7 29.7 33.2 36.4 19.8 28.0 34.3 39.6 44.3 48.5 29.7 42.0 51.4 59.4 66.4 72.7 39.6 56.0 68.6 79.2 88.5 97.0 GAL/1000Ft 20 0.7 1.1 1.3 1.5 1.7 1.8 1.1 1.6 1.9 2.2 2.5 2.7 1.5 2.1 2.6 3.0 3.3 3.6 2.2 3.2 3.9 4.5 5.0 5.5 3.0 4.2 5.1 5.9 6.6 7.3 3.7 5.3 6.4 7.4 8.3 9.1 4.5 6.3 7.7 8.9 10.0 10.9 5.9 8.4 10.3 11.9 13.3 14.5 7.4 10.5 12.9 14.9 16.6 18.2 11.1 15.8 19.3 22.3 24.9 27.3 14.9 21.0 25.7 29.7 33.2 36.4 22.3 31.5 38.6 44.6 49.8 54.6 29.7 42.0 51.4 59.4 66.4 72.7 2 0.17 0.24 0.30 0.34 0.38 0.42 0.26 0.36 0.44 0.51 0.57 0.63 0.34 0.48 0.59 0.68 0.76 0.84 0.51 0.72 0.89 1.02 1.14 1.25 0.68 0.96 1.18 1.36 1.52 1.67 0.85 1.21 1.48 1.70 1.91 2.09 1.02 1.45 1.77 2.05 2.29 2.51 1.36 1.93 2.36 2.73 3.05 3.34 1.70 2.41 2.95 3.41 3.81 4.18 2.56 3.62 4.43 5.11 5.72 6.26 3.41 4.82 5.90 6.82 7.62 8.35 5.11 7.23 8.86 10.23 11.43 12.53 6.82 9.64 11.81 13.64 15.25 16.70 2 20 inch nozzle spacing 3 0.11 0.16 0.20 0.23 0.25 0.28 0.17 0.24 0.30 0.34 0.38 0.42 0.23 0.32 0.39 0.45 0.51 0.56 0.34 0.48 0.59 0.68 0.76 0.84 0.45 0.64 0.79 0.91 1.02 1.11 0.57 0.80 0.98 1.14 1.27 1.39 0.68 0.96 1.18 1.36 1.52 1.67 0.91 1.29 1.57 1.82 2.03 2.23 1.14 1.61 1.97 2.27 2.54 2.78 1.70 2.41 2.95 3.41 3.81 4.18 2.27 3.21 3.94 4.55 5.08 5.57 3.41 4.82 5.90 6.82 7.62 8.35 4.55 6.43 7.87 9.09 10.16 11.13 4 0.09 0.12 0.15 0.17 0.19 0.21 0.13 0.18 0.22 0.26 0.29 0.31 0.17 0.24 0.30 0.34 0.38 0.42 0.26 0.36 0.44 0.51 0.57 0.63 0.34 0.48 0.59 0.68 0.76 0.84 0.43 0.60 0.74 0.85 0.95 1.04 0.51 0.72 0.89 1.02 1.14 1.25 0.68 0.96 1.18 1.36 1.52 1.67 0.85 1.21 1.48 1.70 1.91 2.09 1.28 1.81 2.21 2.56 2.86 3.13 1.70 2.41 2.95 3.41 3.81 4.18 2.56 3.62 4.43 5.11 5.72 6.26 3.41 4.82 5.90 6.82 7.62 8.35 5 0.07 0.10 0.12 0.14 0.15 0.17 0.10 0.14 0.18 0.20 0.23 0.25 0.14 0.19 0.24 0.27 0.30 0.33 0.20 0.29 0.35 0.41 0.46 0.50 0.27 0.39 0.47 0.55 0.61 0.67 0.34 0.48 0.59 0.68 0.76 0.84 0.41 0.58 0.71 0.82 0.91 1.00 0.55 0.77 0.94 1.09 1.22 1.34 0.68 0.96 1.18 1.36 1.52 1.67 1.02 1.45 1.77 2.05 2.29 2.51 1.36 1.93 2.36 2.73 3.05 3.34 2.05 2.89 3.54 4.09 4.57 5.01 2.73 3.86 4.72 5.45 6.10 6.68 2 1 3 1. Simple; deflecting spray pattern 2. Polyacetal; single piece design 3. Available in many sizes to meet your flow rate needs BROADCAST WIDE-ANGLE SPRAY NOZZLES Metric Units Nozzle Droplet Spray Pressure Flow Rate Size Size Angle (BAR) @ 3 bar (LPM) 0.5 0.75 1.0 1.5 2.0 2.5 3.0 4.0 5.0 7.5 10 15 20 VC M F F F F XC M M F F F C M F F F F VC M M F F F M M M F F F C M M M F F C M M M M M M M M M M F M M M M M F C C C C C M C M M M M M C C C C C M VC C C C C C 80º 95º 105º 105º 105º 110º 110º 120º 125º 145º 160º 145º 140º 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 4.0 0.23 0.28 0.32 0.36 0.39 0.46 0.34 0.42 0.48 0.54 0.59 0.68 0.46 0.56 0.64 0.72 0.79 0.91 0.68 0.84 0.97 1.08 1.18 1.37 0.91 1.12 1.29 1.44 1.58 1.82 1.14 1.40 1.61 1.80 1.97 2.28 1.37 1.68 1.93 2.16 2.37 2.74 1.82 2.23 2.58 2.88 3.16 3.65 2.3 2.8 3.2 3.6 3.9 4.6 3.4 4.2 4.8 5.4 5.9 6.8 4.6 5.6 6.4 7.2 7.9 9.1 6.8 8.4 9.7 10.8 11.8 13.7 9.1 11.2 12.9 14.4 15.8 18.2 7 39 48 55 62 68 78 59 72 83 93 102 117 78 96 111 124 135 156 117 144 166 185 203 234 156 191 221 247 271 313 195 239 276 309 338 391 234 287 332 371 406 469 313 383 442 494 541 625 391 479 553 618 677 782 586 718 829 927 1015 1172 782 957 1105 1236 1354 1563 1172 1436 1658 1854 2030 2345 1563 1914 2210 2471 2707 3126 8 34 42 48 54 59 68 51 63 73 81 89 103 68 84 97 108 118 137 103 126 145 162 178 205 137 168 193 216 237 274 171 209 242 270 296 342 205 251 290 324 355 410 274 335 387 432 474 547 342 419 484 541 592 684 513 628 725 811 888 1026 684 838 967 1081 1184 1368 1026 1256 1451 1622 1777 2051 1368 1675 1934 2162 2369 2735 Application Rate L/Ha - 50 cm Spacing KM/H 10 12 15 20 27 34 39 43 47 55 41 50 58 65 71 82 55 67 77 86 95 109 82 101 116 130 142 164 109 134 155 173 190 219 137 168 193 216 237 274 164 201 232 259 284 328 219 268 309 346 379 438 274 335 387 432 474 547 410 503 580 649 711 821 547 670 774 865 948 1094 821 1005 1160 1297 1421 1641 1094 1340 1547 1730 1895 2188 23 28 32 36 39 46 34 42 48 54 59 68 46 56 64 72 79 91 68 84 97 108 118 137 91 112 129 144 158 182 114 140 161 180 197 228 137 168 193 216 237 274 182 223 258 288 316 365 228 279 322 360 395 456 342 419 484 541 592 684 456 558 645 721 790 912 684 838 967 1081 1184 1368 912 1117 1289 1442 1579 1824 18 22 26 29 32 36 27 34 39 43 47 55 36 45 52 58 63 73 55 67 77 86 95 109 73 89 103 115 126 146 91 112 129 144 158 182 109 134 155 173 190 219 146 179 206 231 253 292 182 223 258 288 316 365 274 335 387 432 474 547 365 447 516 577 632 729 547 670 774 865 948 1094 729 893 1032 1153 1263 1459 14 17 19 22 24 27 21 25 29 32 36 41 27 34 39 43 47 55 41 50 58 65 71 82 55 67 77 86 95 109 68 84 97 108 118 137 82 101 116 130 142 164 109 134 155 173 190 219 137 168 193 216 237 274 205 251 290 324 355 410 274 335 387 432 474 547 410 503 580 649 711 821 547 670 774 865 948 1094 Droplet size based on ASABE S572.1 standard. 163 Features 25 11 13 15 17 19 22 16 20 23 26 28 33 22 27 31 35 38 44 33 40 46 52 57 66 44 54 62 69 76 88 55 67 77 86 95 109 66 80 93 104 114 131 88 107 124 138 152 175 109 134 155 173 190 219 164 201 232 259 284 328 219 268 309 346 379 438 328 402 464 519 569 656 438 536 619 692 758 875 30 9 11 13 14 16 18 14 17 19 22 24 27 18 22 26 29 32 36 27 34 39 43 47 55 36 45 52 58 63 73 46 56 64 72 79 91 55 67 77 86 95 109 73 89 103 115 126 146 91 112 129 144 158 182 137 168 193 216 237 274 182 223 258 288 316 365 274 335 387 432 474 547 365 447 516 577 632 729 Common Use Weeds & Fertilizer Pattern Flood Technology Deflection Material Polyacetal Spray Angle 80º-160º Pressure Range 10-60 PSI (1-3 BAR) Configuration Nozzle Part Numbers Nozzles Caps (25 Pack) 30DT0.5 CAP30-20 30DT0.75 CAP30-20 30DT1.0 CAP30-20 30DT1.5 CAP30-20 30DT2.0 CAP30-20 30DT2.5 CAP30-20 30DT3.0 CAP30-20 30DT4.0 CAP30-20 30DT5.0 CAP30-20 30DT7.5 CAP30-20 30DT10 CAP30-20 30DT15 CAP30-20 30DT20 CAP30-20 Ceramic APM 80 -160 o o The Albuz® APM wide-angle flood fan nozzle creates a wide pattern at very low pressures while creating mainly medium and coarse droplets. It is well suited for mounting on machinery where a wide angle or a low spray height is desired and on sprayers using very low pressures, including manual sprayers. The ceramic orifice and deflector make the APM the longest-wearing flood nozzle. • Sprays at very low pressures • Medium to coarse spray is suited for a variety of applications • Large round orifice resists plugging • Wear-resistant Albuz® ceramic orifice and deflector US Units Spray Pressure Flow Rate Nozzle Droplet Angle Size Size @ 30 PSI (PSI) (GPM) 0.12 0.2 0.3 0.4 0.5 0.74 0.94 M M M M M M M M M M M M C C M M M M C C M M M M C C C M M M VC C C C C C VC C C C C C 80º 110º 125º 135º 140º 160º 160º 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 0.12 0.17 0.21 0.24 0.27 0.29 0.20 0.28 0.35 0.40 0.45 0.49 0.30 0.42 0.52 0.60 0.67 0.73 0.40 0.57 0.69 0.80 0.89 0.98 0.50 0.71 0.87 1.00 1.12 1.22 0.70 0.99 1.21 1.40 1.57 1.71 0.91 1.29 1.58 1.82 2.03 2.23 4 4.5 6.3 7.8 8.9 10.0 10.8 7.4 10.4 13.0 14.9 16.7 18.2 11.1 15.6 19.3 22.3 24.9 27.1 14.9 21.2 25.6 29.7 33.0 36.4 18.6 26.4 32.3 37.1 41.6 45.3 26.0 36.8 44.9 52.0 58.3 63.5 33.8 47.9 58.7 67.6 75.4 82.8 Gallons per Acre 20 inch nozzle spacing MPH 5 6 8 10 12 15 3.6 5.0 6.2 7.1 8.0 8.6 5.9 8.3 10.4 11.9 13.4 14.6 8.9 12.5 15.4 17.8 19.9 21.7 11.9 16.9 20.5 23.8 26.4 29.1 14.9 21.1 25.8 29.7 33.3 36.2 20.8 29.4 35.9 41.6 46.6 50.8 27.0 38.3 46.9 54.1 60.3 66.2 3.0 4.2 5.2 5.9 6.7 7.2 5.0 6.9 8.7 9.9 11.1 12.1 7.4 10.4 12.9 14.9 16.6 18.1 9.9 14.1 17.1 19.8 22.0 24.3 12.4 17.6 21.5 24.8 27.7 30.2 17.3 24.5 29.9 34.7 38.9 42.3 22.5 31.9 39.1 45.0 50.2 55.2 2.2 3.2 3.9 4.5 5.0 5.4 3.7 5.2 6.5 7.4 8.4 9.1 5.6 7.8 9.7 11.1 12.4 13.6 7.4 10.6 12.8 14.9 16.5 18.2 9.3 13.2 16.1 18.6 20.8 22.6 13.0 18.4 22.5 26.0 29.1 31.7 16.9 23.9 29.3 33.8 37.7 41.4 1.8 2.5 3.1 3.6 4.0 4.3 3.0 4.2 5.2 5.9 6.7 7.3 4.5 6.2 7.7 8.9 9.9 10.8 5.9 8.5 10.2 11.9 13.2 14.6 7.4 10.5 12.9 14.9 16.6 18.1 10.4 14.7 18.0 20.8 23.3 25.4 13.5 19.2 23.5 27.0 30.1 33.1 1.5 2.1 2.6 3.0 3.3 3.6 2.5 3.5 4.3 5.0 5.6 6.1 3.7 5.2 6.4 7.4 8.3 9.0 5.0 7.1 8.5 9.9 11.0 12.1 6.2 8.8 10.8 12.4 13.9 15.1 8.7 12.3 15.0 17.3 19.4 21.2 11.3 16.0 19.6 22.5 25.1 27.6 1.2 1.7 2.1 2.4 2.7 2.9 2.0 2.8 3.5 4.0 4.5 4.9 3.0 4.2 5.1 5.9 6.6 7.2 4.0 5.6 6.8 7.9 8.8 9.7 5.0 7.0 8.6 9.9 11.1 12.1 6.9 9.8 12.0 13.9 15.5 16.9 9.0 12.8 15.6 18.0 20.1 22.1 GAL/1000Ft 20 0.9 1.3 1.6 1.8 2.0 2.2 1.5 2.1 2.6 3.0 3.3 3.6 2.2 3.1 3.9 4.5 5.0 5.4 3.0 4.2 5.1 5.9 6.6 7.3 3.7 5.3 6.5 7.4 8.3 9.1 5.2 7.4 9.0 10.4 11.7 12.7 6.8 9.6 11.7 13.5 15.1 16.6 2 0.41 0.58 0.72 0.82 0.92 0.99 0.68 0.95 1.19 1.36 1.53 1.67 1.02 1.43 1.77 2.05 2.28 2.49 1.36 1.94 2.35 2.73 3.03 3.34 1.71 2.42 2.97 3.41 3.82 4.16 2.39 3.38 4.13 4.77 5.35 5.83 3.10 4.40 5.39 6.21 6.92 7.60 2 20 inch nozzle spacing 3 0.27 0.39 0.48 0.55 0.61 0.66 0.45 0.64 0.80 0.91 1.02 1.11 0.68 0.95 1.18 1.36 1.52 1.66 0.91 1.30 1.57 1.82 2.02 2.23 1.14 1.61 1.98 2.27 2.55 2.77 1.59 2.25 2.75 3.18 3.57 3.89 2.07 2.93 3.59 4.14 4.61 5.07 4 0.20 0.29 0.36 0.41 0.46 0.49 0.34 0.48 0.60 0.68 0.77 0.84 0.51 0.72 0.89 1.02 1.14 1.24 0.68 0.97 1.18 1.36 1.52 1.67 0.85 1.21 1.48 1.71 1.91 2.08 1.19 1.69 2.06 2.39 2.68 2.92 1.55 2.20 2.69 3.10 3.46 3.80 5 0.16 0.23 0.29 0.33 0.37 0.40 0.27 0.38 0.48 0.55 0.61 0.67 0.41 0.57 0.71 0.82 0.91 1.00 0.55 0.78 0.94 1.09 1.21 1.34 0.68 0.97 1.19 1.36 1.53 1.66 0.95 1.35 1.65 1.91 2.14 2.33 1.24 1.76 2.16 2.48 2.77 3.04 Droplet size based on ASABE S572.1 standard. Albuz® is a registered trademark of SAINT-GOBAIN SOLCERA, SAINT GOBAIN CERAMIQUES AVANCEES DESMARQUEST, CERAMIQUES TECHNIQUES DESMARQUEST, and SOCIETE DESMARQUEST ET CEC.. Hypro® is a registered trademark of Pentair. 164 BROADCAST WIDE-ANGLE SPRAY NOZZLES Metric Units Spray Pressure Flow Nozzle Droplet Angle Rate Size Size @ 2 bar (Bar) (LPM) M 0.5 0.39 M 1 0.55 M 1.5 0.67 0.12 M 2 0.78 80º M 2.5 0.87 M 3 0.95 M 3.5 1.03 M 4 1.1 M 0.5 0.64 M 1 0.91 M 1.5 1.12 M 2 1.29 110º 0.2 M 2.5 1.44 M 3 1.58 M 3.5 1.71 M 4 1.82 C 0.5 0.97 C 1 1.37 C 1.5 1.68 M 2 1.94 125º 0.3 M 2.5 2.17 M 3 2.38 M 3.5 2.57 M 4 2.74 C 0.5 1.3 C 1 1.84 C 1.5 2.25 M 2 2.6 135º 0.4 M 2.5 2.9 M 3 3.18 M 3.5 3.43 M 4 3.68 C 0.5 1.62 C 1 2.29 C 1.5 2.8 C 2 3.23 140º 0.5 M 2.5 3.61 M 3 3.96 M 3.5 4.28 M 4 4.58 VC 0.5 2.3 C 1 3.25 C 1.5 3.98 C 2 4.6 160º 0.7 C 2.5 5.14 C 3 5.63 C 3.5 6.08 C 4 6.5 VC 0.5 3 C 1 4.24 C 1.5 5.19 C 2 6 160º 0.91 C 2.5 6.7 C 3 7.35 C 3.5 7.93 C 4 8.48 Droplet size based on ASABE S572.1 standard. 6 39.0 55.0 67.0 78.0 87.0 95.0 103.0 110.0 64.0 91.0 112.0 129.0 144.0 158.0 171.0 182.0 97.0 137.0 168.0 194.0 217.0 238.0 257.0 274.0 130.0 184.0 225.0 260.0 290.0 318.0 343.0 368.0 162.0 229.0 280.0 323.0 361.0 396.0 428.0 458.0 230.0 325.0 398.0 460.0 514.0 563.0 608.0 650.0 300.0 424.0 519.0 600.0 670.0 735.0 793.0 848.0 8 29.3 41.3 50.3 58.5 65.3 71.3 77.3 82.5 48.0 68.3 84.0 96.8 108.0 118.5 128.3 136.5 72.8 102.8 126.0 145.5 162.8 178.5 192.8 205.5 97.5 138.0 168.8 195.0 217.5 238.5 257.3 276.0 121.5 171.8 210.0 242.3 270.8 297.0 321.0 343.5 172.5 243.8 298.5 345.0 385.5 422.3 456.0 487.5 225.0 318.0 389.3 450.0 502.5 551.3 594.8 636.0 10 23.4 33.0 40.2 46.8 52.2 57.0 61.8 66.0 38.4 54.6 67.2 77.4 86.4 94.8 102.6 109.2 58.2 82.2 100.8 116.4 130.2 142.8 154.2 164.4 78.0 110.4 135.0 156.0 174.0 190.8 205.8 220.8 97.2 137.4 168.0 193.8 216.6 237.6 256.8 274.8 138.0 195.0 238.8 276.0 308.4 337.8 364.8 390.0 180.0 254.4 311.4 360.0 402.0 441.0 475.8 508.8 Liters/Hectare 100 cm nozzle spacing 12 14 16 17 19.5 27.5 33.5 39.0 43.5 47.5 51.5 55.0 32.0 45.5 56.0 64.5 72.0 79.0 85.5 91.0 48.5 68.5 84.0 97.0 108.5 119.0 128.5 137.0 65.0 92.0 112.5 130.0 145.0 159.0 171.5 184.0 81.0 114.5 140.0 161.5 180.5 198.0 214.0 229.0 115.0 162.5 199.0 230.0 257.0 281.5 304.0 325.0 150.0 212.0 259.5 300.0 335.0 367.5 396.5 424.0 16.7 23.6 28.7 33.4 37.3 40.7 44.1 47.1 27.4 39.0 48.0 55.3 61.7 67.7 73.3 78.0 41.6 58.7 72.0 83.1 93.0 102.0 110.1 117.4 55.7 78.9 96.4 111.4 124.3 136.3 147.0 157.7 69.4 98.1 120.0 138.4 154.7 169.7 183.4 196.3 98.6 139.3 170.6 197.1 220.3 241.3 260.6 278.6 128.6 181.7 222.4 257.1 287.1 315.0 339.9 363.4 14.6 20.6 25.1 29.3 32.6 35.6 38.6 41.3 24.0 34.1 42.0 48.4 54.0 59.3 64.1 68.3 36.4 51.4 63.0 72.8 81.4 89.3 96.4 102.8 48.8 69.0 84.4 97.5 108.8 119.3 128.6 138.0 60.8 85.9 105.0 121.1 135.4 148.5 160.5 171.8 86.3 121.9 149.3 172.5 192.8 211.1 228.0 243.8 112.5 159.0 194.6 225.0 251.3 275.6 297.4 318.0 165 13.0 18.3 22.3 26.0 29.0 31.7 34.3 36.7 21.3 30.3 37.3 43.0 48.0 52.7 57.0 60.7 32.3 45.7 56.0 64.7 72.3 79.3 85.7 91.3 43.3 61.3 75.0 86.7 96.7 106.0 114.3 122.7 54.0 76.3 93.3 107.7 120.3 132.0 142.7 152.7 76.7 108.3 132.7 153.3 171.3 187.7 202.7 216.7 100.0 141.3 173.0 200.0 223.3 245.0 264.3 282.7 Features 20 11.7 16.5 20.1 23.4 26.1 28.5 30.9 33.0 19.2 27.3 33.6 38.7 43.2 47.4 51.3 54.6 29.1 41.1 50.4 58.2 65.1 71.4 77.1 82.2 39.0 55.2 67.5 78.0 87.0 95.4 102.9 110.4 48.6 68.7 84.0 96.9 108.3 118.8 128.4 137.4 69.0 97.5 119.4 138.0 154.2 168.9 182.4 195.0 90.0 127.2 155.7 180.0 201.0 220.5 237.9 254.4 25 9.4 13.2 16.1 18.7 20.9 22.8 24.7 26.4 15.4 21.8 26.9 31.0 34.6 37.9 41.0 43.7 23.3 32.9 40.3 46.6 52.1 57.1 61.7 65.8 31.2 44.2 54.0 62.4 69.6 76.3 82.3 88.3 38.9 55.0 67.2 77.5 86.6 95.0 102.7 109.9 55.2 78.0 95.5 110.4 123.4 135.1 145.9 156.0 72.0 101.8 124.6 144.0 160.8 176.4 190.3 203.5 30 7.8 11.0 13.4 15.6 17.4 19.0 20.6 22.0 12.8 18.2 22.4 25.8 28.8 31.6 34.2 36.4 19.4 27.4 33.6 38.8 43.4 47.6 51.4 54.8 26.0 36.8 45.0 52.0 58.0 63.6 68.6 73.6 32.4 45.8 56.0 64.6 72.2 79.2 85.6 91.6 46.0 65.0 79.6 92.0 102.8 112.6 121.6 130.0 60.0 84.8 103.8 120.0 134.0 147.0 158.6 169.6 Common Use Weeds & Fertilizer Pattern Flood Technology Deflection Material Ceramic Spray Angle 80º - 160º Pressure Range 10-60 PSI (1-4 BAR) Configuration Nozzles Part Numbers Nozzles Caps (25 Pack) APM-YELLOW CAP04-20 APM-ORANGE CAP04-20 APM-RED CAP04-20 APM-GREEN CAP04-20 APM-BLUE CAP04-20 APM-GRAY CAP04-20 APM-BLACK CAP04-20 ESI Six Stream The ESI six stream nozzle is designed for applying liquid fertilizer. It creates six individual streams that distribute the fertilizer on the soil while getting less on the crop. The wear resistant metering orifice and unique low pressure distribution chamber keep the streams stable to reduce atomization and prevent leaf burn and scorching. Spacing and spray height is similar to 110° broadcast nozzles. • Six streams distribute fertilizer more evenly than one single stream • Wear-resistant orifice for long product life • FastCap includes nozzle, cap and gasket US Units Nozzle Pressure Flow Rate Size (PSI) (GPM) 015 02 025 03 04 05 06 08 10 15 20 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 0.09 0.11 0.13 0.15 0.17 0.18 0.12 0.14 0.17 0.20 0.22 0.24 0.15 0.18 0.22 0.25 0.28 0.31 0.18 0.21 0.26 0.30 0.34 0.37 0.24 0.28 0.35 0.40 0.45 0.49 0.31 0.35 0.43 0.50 0.56 0.61 0.37 0.42 0.52 0.60 0.67 0.73 0.49 0.57 0.69 0.80 0.89 0.98 0.61 0.71 0.87 1.00 1.12 1.22 0.92 1.06 1.30 1.50 1.68 1.84 1.22 1.41 1.73 2.00 2.24 2.45 4 8.2 9.7 11.1 12.6 13.4 8.9 10.4 12.6 14.9 16.3 17.8 11.1 13.4 16.3 18.6 20.8 23.0 13.4 15.6 19.3 22.3 25.2 27.5 17.8 20.8 26.0 29.7 33.4 36.4 23.0 26.0 31.9 37.1 41.6 45.3 27.5 31.2 38.6 44.6 49.7 54.2 36.4 42.3 51.2 59.4 66.1 72.8 45.3 52.7 64.6 74.3 83.2 90.6 68.3 78.7 96.5 111 125 137 90.6 105 128 149 166 182 5 5.3 6.5 7.7 8.9 10.1 10.7 7.1 8.3 10.1 11.9 13.1 14.3 8.9 10.7 13.1 14.9 16.6 18.4 10.7 12.5 15.4 17.8 20.2 22.0 14.3 16.6 20.8 23.8 26.7 29.1 18.4 20.8 25.5 29.7 33.3 36.2 22.0 24.9 30.9 35.6 39.8 43.4 29.1 33.9 41.0 47.5 52.9 58.2 36.2 42.2 51.7 59.4 66.5 72.5 54.6 63.0 77.2 89.1 99.8 109 72.5 83.8 103 119 133 146 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 4.5 5.4 6.4 7.4 8.4 8.9 5.9 6.9 8.4 9.9 10.9 11.9 7.4 8.9 10.9 12.4 13.9 15.3 8.9 10.4 12.9 14.9 16.8 18.3 11.9 13.9 17.3 19.8 22.3 24.3 15.3 17.3 21.3 24.8 27.7 30.2 18.3 20.8 25.7 29.7 33.2 36.1 24.3 28.2 34.2 39.6 44.1 48.5 30.2 35.1 43.1 49.5 55.4 60.4 45.5 52.5 64.4 74.3 83.2 91.1 60.4 69.8 85.6 99.0 111 121 3.3 4.1 4.8 5.6 6.3 6.7 4.5 5.2 6.3 7.4 8.2 8.9 5.6 6.7 8.2 9.3 10.4 11.5 6.7 7.8 9.7 11.1 12.6 13.7 8.9 10.4 13.0 14.9 16.7 18.2 11.5 13.0 16.0 18.6 20.8 22.6 13.7 15.6 19.3 22.3 24.9 27.1 18.2 21.2 25.6 29.7 33.0 36.4 22.6 26.4 32.3 37.1 41.6 45.3 34.2 39.4 48.3 55.7 62.4 68.3 45.3 52.3 64.2 74.3 83.2 91.0 2.7 3.3 3.9 4.5 5.0 5.3 3.6 4.2 5.0 5.9 6.5 7.1 4.5 5.3 6.5 7.4 8.3 9.2 5.3 6.2 7.7 8.9 10.1 11.0 7.1 8.3 10.4 11.9 13.4 14.6 9.2 10.4 12.8 14.9 16.6 18.1 11.0 12.5 15.4 17.8 19.9 21.7 14.6 16.9 20.5 23.8 26.4 29.1 18.1 21.1 25.8 29.7 33.3 36.2 27.3 31.5 38.6 44.6 49.9 54.6 36.2 41.9 51.4 59.4 66.5 72.8 2.2 2.7 3.2 3.7 4.2 4.5 3.0 3.5 4.2 5.0 5.4 5.9 3.7 4.5 5.4 6.2 6.9 7.7 4.5 5.2 6.4 7.4 8.4 9.2 5.9 6.9 8.7 9.9 11.1 12.1 7.7 8.7 10.6 12.4 13.9 15.1 9.2 10.4 12.9 14.9 16.6 18.1 12.1 14.1 17.1 19.8 22.0 24.3 15.1 17.6 21.5 24.8 27.7 30.2 22.8 26.2 32.2 37.1 41.6 45.5 30.2 34.9 42.8 49.5 55.4 60.6 GAL/1000Ft 15 1.8 2.2 2.6 3.0 3.4 3.6 2.4 2.8 3.4 4.0 4.4 4.8 3.0 3.6 4.4 5.0 5.5 6.1 3.6 4.2 5.1 5.9 6.7 7.3 4.8 5.5 6.9 7.9 8.9 9.7 6.1 6.9 8.5 9.9 11.1 12.1 7.3 8.3 10.3 11.9 13.3 14.5 9.7 11.3 13.7 15.8 17.6 19.4 12.1 14.1 17.2 19.8 22.2 24.2 18.2 21.0 25.7 29.7 33.3 36.4 24.2 27.9 34.3 39.6 44.4 48.5 20 1.3 1.6 1.9 2.2 2.5 2.7 1.8 2.1 2.5 3.0 3.3 3.6 2.2 2.7 3.3 3.7 4.2 4.6 2.7 3.1 3.9 4.5 5.0 5.5 3.6 4.2 5.2 5.9 6.7 7.3 4.6 5.2 6.4 7.4 8.3 9.1 5.5 6.2 7.7 8.9 9.9 10.8 7.3 8.5 10.2 11.9 13.2 14.6 9.1 10.5 12.9 14.9 16.6 18.1 13.7 15.7 19.3 22.3 24.9 27.3 18.1 20.9 25.7 29.7 33.3 36.4 166 2 0.31 0.38 0.44 0.51 0.58 0.61 0.41 0.48 0.58 0.68 0.75 0.82 0.51 0.61 0.75 0.85 0.95 1.06 0.61 0.72 0.89 1.02 1.16 1.26 0.82 0.95 1.19 1.36 1.53 1.67 1.06 1.19 1.47 1.71 1.91 2.08 1.26 1.43 1.77 2.05 2.28 2.49 1.67 1.94 2.35 2.73 3.03 3.34 2.08 2.42 2.97 3.41 3.82 4.16 3.14 3.61 4.43 5.12 5.73 6.27 4.16 4.81 5.90 6.82 7.64 8.35 2 20 inch nozzle spacing 3 0.20 0.25 0.30 0.34 0.39 0.41 0.27 0.32 0.39 0.45 0.50 0.55 0.34 0.41 0.50 0.57 0.64 0.70 0.41 0.48 0.59 0.68 0.77 0.84 0.55 0.64 0.80 0.91 1.02 1.11 0.70 0.80 0.98 1.14 1.27 1.39 0.84 0.95 1.18 1.36 1.52 1.66 1.11 1.30 1.57 1.82 2.02 2.23 1.39 1.61 1.98 2.27 2.55 2.77 2.09 2.41 2.96 3.41 3.82 4.18 2.77 3.21 3.93 4.55 5.09 5.57 4 0.15 0.19 0.22 0.26 0.29 0.31 0.20 0.24 0.29 0.34 0.38 0.41 0.26 0.31 0.38 0.43 0.48 0.53 0.31 0.36 0.44 0.51 0.58 0.63 0.41 0.48 0.60 0.68 0.77 0.84 0.53 0.60 0.73 0.85 0.95 1.04 0.63 0.72 0.89 1.02 1.14 1.24 0.84 0.97 1.18 1.36 1.52 1.67 1.04 1.21 1.48 1.71 1.91 2.08 1.57 1.81 2.22 2.56 2.86 3.14 2.08 2.40 2.95 3.41 3.82 4.18 5 0.12 0.15 0.18 0.20 0.23 0.25 0.16 0.19 0.23 0.27 0.30 0.33 0.20 0.25 0.30 0.34 0.38 0.42 0.25 0.29 0.35 0.41 0.46 0.50 0.33 0.38 0.48 0.55 0.61 0.67 0.42 0.48 0.59 0.68 0.76 0.83 0.50 0.57 0.71 0.82 0.91 1.00 0.67 0.78 0.94 1.09 1.21 1.34 0.83 0.97 1.19 1.36 1.53 1.66 1.25 1.45 1.77 2.05 2.29 2.51 1.66 1.92 2.36 2.73 3.06 3.34 1 2 3 1. Single inlet; Six outlet design for uniform application 2. Pre-orifice; superior product life 3. Available in a FastCap option for easy installation of a streaming nozzle STREAMING SPRAY NOZZLES 110° wide pattern consisting of 6 equally spaced streams providing uniform deposition of liquid fertilizers. Each individual stream was engineered to hold stream integrity and not break apart to avoid unwanted fertilizer burn on post emerge applications. Metric Units Nozzle Pressure Flow Rate Size (BAR) (LPM) 015 02 025 03 04 05 06 08 10 15 20 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 0,35 0,42 0,49 0,55 0,60 0,69 0,46 0,57 0,65 0,73 0,80 0,92 0,58 0,71 0,82 0,91 1,00 1,15 0,69 0,85 0,98 1,10 1,20 1,39 0,92 1,13 1,31 1,46 1,60 1,85 1,15 1,41 1,63 1,83 2,00 2,31 1,39 1,70 1,96 2,19 2,40 2,77 1,85 2,26 2,61 2,92 3,20 3,70 2,3 2,8 3,3 3,7 4,0 4,6 3,5 4,2 4,9 5,5 6,0 6,9 4,6 5,7 6,5 7,3 8,0 9,2 7 60 72 84 94 103 118 79 98 111 125 137 158 99 122 141 156 171 197 118 146 168 189 206 238 158 194 225 250 274 317 197 242 279 314 343 396 238 291 336 375 411 475 317 387 447 501 549 634 394 480 566 634 686 789 600 720 840 943 1029 1183 789 977 1114 1251 1371 1577 8 53 63 74 83 90 104 69 86 98 110 120 138 87 107 123 137 150 173 104 128 147 165 180 209 138 170 197 219 240 278 173 212 245 275 300 347 209 255 294 329 360 416 278 339 392 438 480 555 345 420 495 555 600 690 525 630 735 825 900 1035 690 855 975 1095 1200 1380 Application Rate L/Ha -50 cm Spacing KM/H 10 12 15 20 42 50 59 66 72 83 55 68 78 88 96 110 70 85 98 109 120 138 83 102 118 132 144 167 110 136 157 175 192 222 138 169 196 220 240 277 167 204 235 263 288 332 222 271 313 350 384 444 276 336 396 444 480 552 420 504 588 660 720 828 552 684 780 876 960 1104 35 42 49 55 60 69 46 57 65 73 80 92 58 71 82 91 100 115 69 85 98 110 120 139 92 113 131 146 160 185 115 141 163 183 200 231 139 170 196 219 240 277 185 226 261 292 320 370 230 280 330 370 400 460 350 420 490 550 600 690 460 570 650 730 800 920 28 34 39 44 48 55 37 46 52 58 64 74 46 57 66 73 80 92 55 68 78 88 96 111 74 90 105 117 128 148 92 113 130 146 160 185 111 136 157 175 192 222 148 181 209 234 256 296 184 224 264 296 320 368 280 336 392 440 480 552 368 456 520 584 640 736 21 25 29 33 36 41 28 34 39 44 48 55 35 43 49 55 60 69 41 51 59 66 72 83 55 68 79 88 96 111 69 85 98 110 120 139 83 102 118 131 144 166 111 136 157 175 192 222 138 168 198 222 240 276 210 252 294 330 360 414 276 342 390 438 480 552 Features 25 17 20 24 26 29 33 22 27 31 35 38 44 28 34 39 44 48 55 33 41 47 53 58 67 44 54 63 70 77 89 55 68 78 88 96 111 67 82 94 105 115 133 89 108 125 140 154 178 110 134 158 178 192 221 168 202 235 264 288 331 221 274 312 350 384 442 167 30 14 17 20 22 24 28 18 23 26 29 32 37 23 28 33 36 40 46 28 34 39 44 48 56 37 45 52 58 64 74 46 56 65 73 80 92 56 68 78 88 96 111 74 90 104 117 128 148 92 112 132 148 160 184 140 168 196 220 240 276 184 228 260 292 320 368 Common Use Fertilizer Pattern Streams Technology Pre-Orifice Material Ceramic or Polyacetal Spray Angle 110º Equivalent Pressure Range 15-60 PSI (1-4 BAR) Configuration Nozzle, FastCap Optimum Boom Height 15" (35 cm) Spacing 15" (35 cm) 20" (50 cm) Spacing 20" (50 cm) Part Numbers Nozzles 110º FastCaps 110º FastCaps 110º Ceramic Orifice Ceramic Orifice Polyacetal Orifice ESI-110015 FC-ESI-110015* FC-ESI-110015P ESI-11002 FC-ESI-11002* FC-ESI-11002P ESI-110025 FC-ESI-110025* – ESI-11003 FC-ESI-11003* FC-ESI-11003P ESI-11004 FC-ESI-11004* FC-ESI-11004P ESI-11005 FC-ESI-11005* FC-ESI-11005P ESI-11006 FC-ESI-11006* FC-ESI-11006P – FC-ESI-11008 – – FC-ESI-11010 – – FC-ESI-11015 – – – FC-ESI-11020P Replacement Cap Gasket 22W11MF64 Flat seal (sizes 015-06) 65-BS205 O-ring (sizes 08-15) * Uses flat sealing gasket. Fanjet 0 o The 0-degree Fanjet regulates flow, then produces a straight stream pattern. Precision-molded in polyvinylidene fluoride (PVDF) for excellent resistance to acids and many agricultural chemicals. • 0-degree nozzles provide a single jet of spray for streaming or injecting liquid fertilizer • Precision-molded using chemically-resistant PVDF material • Superior resistance to orifice wear compared to brass or stainless steel • Part number is molded into front of nozzle US Units Flow Nozzle Pressure Rate (PSI) Size (GPM) 02 03 04 05 06 07 10 15 20 30 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 15 20 30 40 50 60 0.12 0.14 0.17 0.20 0.22 0.24 0.18 0.21 0.26 0.30 0.34 0.37 0.24 0.28 0.35 0.40 0.45 0.49 0.31 0.35 0.43 0.50 0.56 0.61 0.37 0.42 0.52 0.60 0.67 0.73 0.43 0.49 0.61 0.70 0.78 0.86 0.61 0.71 0.87 1.00 1.12 1.22 0.92 1.06 1.30 1.50 1.68 1.84 1.22 1.41 1.73 2.00 2.24 2.45 1.84 2.12 2.60 3.00 3.35 3.67 4 8.9 10.4 12.6 14.9 16.3 17.8 13.4 15.6 19.3 22.3 25.2 27.5 17.8 20.8 26.0 29.7 33.4 36.4 23.0 26.0 31.9 37.1 41.6 45.3 27.5 31.2 38.6 44.6 49.7 54.2 31.9 36.4 45.3 52.0 57.9 63.9 45.3 52.7 64.6 74.3 83.2 90.6 68.3 78.7 96.5 111 125 137 90.6 105 128 149 166 182 137 157 193 223 249 272 5 7.1 8.3 10.1 11.9 13.1 14.3 10.7 12.5 15.4 17.8 20.2 22.0 14.3 16.6 20.8 23.8 26.7 29.1 18.4 20.8 25.5 29.7 33.3 36.2 22.0 24.9 30.9 35.6 39.8 43.4 25.5 29.1 36.2 41.6 46.3 51.1 36.2 42.2 51.7 59.4 66.5 72.5 54.6 63.0 77.2 89.1 99.8 109 72.5 83.8 103 119 133 146 109 126 154 178 199 218 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 5.9 6.9 8.4 9.9 10.9 11.9 8.9 10.4 12.9 14.9 16.8 18.3 11.9 13.9 17.3 19.8 22.3 24.3 15.3 17.3 21.3 24.8 27.7 30.2 18.3 20.8 25.7 29.7 33.2 36.1 21.3 24.3 30.2 34.7 38.6 42.6 30.2 35.1 43.1 49.5 55.4 60.4 45.5 52.5 64.4 74.3 83.2 91.1 60.4 69.8 85.6 99.0 111 121 91.1 105 129 149 166 182 4.5 5.2 6.3 7.4 8.2 8.9 6.7 7.8 9.7 11.1 12.6 13.7 8.9 10.4 13.0 14.9 16.7 18.2 11.5 13.0 16.0 18.6 20.8 22.6 13.7 15.6 19.3 22.3 24.9 27.1 16.0 18.2 22.6 26.0 29.0 31.9 22.6 26.4 32.3 37.1 41.6 45.3 34.2 39.4 48.3 55.7 62.4 68.3 45.3 52.3 64.2 74.3 83.2 91.0 68.3 78.7 96.5 111 124 136 3.6 4.2 5.0 5.9 6.5 7.1 5.3 6.2 7.7 8.9 10.1 11.0 7.1 8.3 10.4 11.9 13.4 14.6 9.2 10.4 12.8 14.9 16.6 18.1 11.0 12.5 15.4 17.8 19.9 21.7 12.8 14.6 18.1 20.8 23.2 25.5 18.1 21.1 25.8 29.7 33.3 36.2 27.3 31.5 38.6 44.6 49.9 54.6 36.2 41.9 51.4 59.4 66.5 72.8 54.6 63.0 77.2 89.1 99.5 109 3.0 3.5 4.2 5.0 5.4 5.9 4.5 5.2 6.4 7.4 8.4 9.2 5.9 6.9 8.7 9.9 11.1 12.1 7.7 8.7 10.6 12.4 13.9 15.1 9.2 10.4 12.9 14.9 16.6 18.1 10.6 12.1 15.1 17.3 19.3 21.3 15.1 17.6 21.5 24.8 27.7 30.2 22.8 26.2 32.2 37.1 41.6 45.5 30.2 34.9 42.8 49.5 55.4 60.6 45.5 52.5 64.4 74.3 82.9 90.8 GAL/1000Ft 15 2.4 2.8 3.4 4.0 4.4 4.8 3.6 4.2 5.1 5.9 6.7 7.3 4.8 5.5 6.9 7.9 8.9 9.7 6.1 6.9 8.5 9.9 11.1 12.1 7.3 8.3 10.3 11.9 13.3 14.5 8.5 9.7 12.1 13.9 15.4 17.0 12.1 14.1 17.2 19.8 22.2 24.2 18.2 21.0 25.7 29.7 33.3 36.4 24.2 27.9 34.3 39.6 44.4 48.5 36.4 42.0 51.5 59.4 66.3 72.7 20 1.8 2.1 2.5 3.0 3.3 3.6 2.7 3.1 3.9 4.5 5.0 5.5 3.6 4.2 5.2 5.9 6.7 7.3 4.6 5.2 6.4 7.4 8.3 9.1 5.5 6.2 7.7 8.9 9.9 10.8 6.4 7.3 9.1 10.4 11.6 12.8 9.1 10.5 12.9 14.9 16.6 18.1 13.7 15.7 19.3 22.3 24.9 27.3 18.1 20.9 25.7 29.7 33.3 36.4 27.3 31.5 38.6 44.6 49.7 54.5 168 2 0.41 0.48 0.58 0.68 0.75 0.82 0.61 0.72 0.89 1.02 1.16 1.26 0.82 0.95 1.19 1.36 1.53 1.67 1.06 1.19 1.47 1.71 1.91 2.08 1.26 1.43 1.77 2.05 2.28 2.49 1.47 1.67 2.08 2.39 2.66 2.93 2.08 2.42 2.97 3.41 3.82 4.16 3.14 3.61 4.43 5.12 5.73 6.27 4.16 4.81 5.90 6.82 7.64 8.35 6.27 7.23 8.87 10.2 11.4 12.5 2 20 inch nozzle spacing 3 0.27 0.32 0.39 0.45 0.50 0.55 0.41 0.48 0.59 0.68 0.77 0.84 0.55 0.64 0.80 0.91 1.02 1.11 0.70 0.80 0.98 1.14 1.27 1.39 0.84 0.95 1.18 1.36 1.52 1.66 0.98 1.11 1.39 1.59 1.77 1.96 1.39 1.61 1.98 2.27 2.55 2.77 2.09 2.41 2.96 3.41 3.82 4.18 2.77 3.21 3.93 4.55 5.09 5.57 4.18 4.82 5.91 6.82 7.62 8.34 4 0.20 0.24 0.29 0.34 0.38 0.41 0.31 0.36 0.44 0.51 0.58 0.63 0.41 0.48 0.60 0.68 0.77 0.84 0.53 0.60 0.73 0.85 0.95 1.04 0.63 0.72 0.89 1.02 1.14 1.24 0.73 0.84 1.04 1.19 1.33 1.47 1.04 1.21 1.48 1.71 1.91 2.08 1.57 1.81 2.22 2.56 2.86 3.14 2.08 2.40 2.95 3.41 3.82 4.18 3.14 3.61 4.43 5.12 5.71 6.26 5 0.16 0.19 0.23 0.27 0.30 0.33 0.25 0.29 0.35 0.41 0.46 0.50 0.33 0.38 0.48 0.55 0.61 0.67 0.42 0.48 0.59 0.68 0.76 0.83 0.50 0.57 0.71 0.82 0.91 1.00 0.59 0.67 0.83 0.95 1.06 1.17 0.83 0.97 1.19 1.36 1.53 1.66 1.25 1.45 1.77 2.05 2.29 2.51 1.66 1.92 2.36 2.73 3.06 3.34 2.51 2.89 3.55 4.09 4.57 5.01 STREAMING SPRAY NOZZLES Metric Units Nozzle Pressure Flow Rate Size (BAR) (LPM) 02 03 04 05 06 07 10 15 20 30 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 1 1,5 2 2,5 3 4 0,46 0,57 0,65 0,73 0,80 0,92 0,69 0,85 0,98 1,10 1,20 1,39 0,92 1,13 1,31 1,46 1,60 1,85 1,15 1,41 1,63 1,83 2,00 2,31 1,39 1,70 1,96 2,19 2,40 2,77 1,62 1,98 2,29 2,56 2,80 3,23 2,3 2,8 3,3 3,7 4,0 4,6 3,5 4,2 4,9 5,5 6,0 6,9 4,6 5,7 6,5 7,3 8,0 9,2 6,9 8,5 9,8 11,0 12,0 13,9 7 79 98 111 125 137 158 118 146 168 189 206 238 158 194 225 250 274 317 197 242 279 314 343 396 238 291 336 375 411 475 278 339 393 439 480 554 394 480 566 634 686 789 600 720 840 943 1029 1183 789 977 1114 1251 1371 1577 1183 1457 1680 1886 2057 2383 8 69 86 98 110 120 138 104 128 147 165 180 209 138 170 197 219 240 278 173 212 245 275 300 347 209 255 294 329 360 416 243 297 344 384 420 485 345 420 495 555 600 690 525 630 735 825 900 1035 690 855 975 1095 1200 1380 1035 1275 1470 1650 1800 2085 Application Rate L/Ha - 50 cm Spacing KM/H 10 12 15 20 55 68 78 88 96 110 83 102 118 132 144 167 110 136 157 175 192 222 138 169 196 220 240 277 167 204 235 263 288 332 194 238 275 307 336 388 276 336 396 444 480 552 420 504 588 660 720 828 552 684 780 876 960 1104 828 1020 1176 1320 1440 1668 46 57 65 73 80 92 69 85 98 110 120 139 92 113 131 146 160 185 115 141 163 183 200 231 139 170 196 219 240 277 162 198 229 256 280 323 230 280 330 370 400 460 350 420 490 550 600 690 460 570 650 730 800 920 690 850 980 1100 1200 1390 37 46 52 58 64 74 55 68 78 88 96 111 74 90 105 117 128 148 92 113 130 146 160 185 111 136 157 175 192 222 130 158 183 205 224 258 184 224 264 296 320 368 280 336 392 440 480 552 368 456 520 584 640 736 552 680 784 880 960 1112 28 34 39 44 48 55 41 51 59 66 72 83 55 68 79 88 96 111 69 85 98 110 120 139 83 102 118 131 144 166 97 119 137 154 168 194 138 168 198 222 240 276 210 252 294 330 360 414 276 342 390 438 480 552 414 510 588 660 720 834 Features 25 22 27 31 35 38 44 33 41 47 53 58 67 44 54 63 70 77 89 55 68 78 88 96 111 67 82 94 105 115 133 78 95 110 123 134 155 110 134 158 178 192 221 168 202 235 264 288 331 221 274 312 350 384 442 331 408 470 528 576 667 30 18 23 26 29 32 37 28 34 39 44 48 56 37 45 52 58 64 74 46 56 65 73 80 92 56 68 78 88 96 111 65 79 92 102 112 129 92 112 132 148 160 184 140 168 196 220 240 276 184 228 260 292 320 368 276 340 392 440 480 556 169 Common Use Fertilizer Pattern Stream Technology Round Orifice Material PVDF Spray Angle 0º Pressure Range 15-60 PSI (1-4 BAR) Configuration 1/4” MNPT or BSP Part Numbers NPT BSP 90A2CM02E00 90B2CM02E00 90A2CM03E00 90B2CM03E00 90A2CM04E00 90B2CM04E00 90A2CM05E00 90B2CM05E00 90A2CM06E00 90B2CM06E00 90A2CM07E00 90B2CM07E00 90A2CM10E00 90B2CM10E00 90A2CM15E00 90B2CM15E00 90A2CM20E00 90B2CM20E00 90A2CM30E00 90B2CM30E00 Flow Regulating Disc DC The Hypro Flow Regulating Disc – DC is commonly paired with push-toconnect products in liquid fertilizer systems onboard planting equipment. • Regulates flow and produces a straight stream pattern • Precision-molded in polyacetal for reliable performance • Conveniently packaged in a quantity of ten US Units Disc 10 15 20 US Gallon/Min PSI 30 35 40 25 Features 60 80 100 150 30-DC-00 30-DC010 30-DC018 30-DC023 0-DC-01 30-DC-015 30-DC-02 30-DC-03 30-DC-035 30-DC-04 30-DC-05 30-DC-06 30-DC-07 30-DC-08 30-DC-10 0 0.008 0.030 0.038 0.057 0.078 0.105 0.133 0.175 0.242 0.392 0.570 0.760 0.960 1.55 0 0.010 0.037 0.047 0.070 0.096 0.129 0.163 0.214 0.296 0.480 0.698 0.931 1.18 1.90 0 0.011 0.042 0.054 0.081 0.110 0.148 0.188 0.247 0.342 0.554 0.806 1.07 1.36 2.19 0 0.013 0.047 0.060 0.090 0.123 0.166 0.210 0.277 0.383 0.620 0.901 1.20 1.52 2.45 0 0.014 0.052 0.066 0.099 0.135 0.182 0.230 0.303 0.419 0.679 0.987 1.32 1.66 2.68 0 0.015 0.056 0.071 0.107 0.146 0.196 0.249 0.327 0.453 0.733 1.07 1.42 1.80 2.90 0 0.016 0.060 0.076 0.114 0.156 0.210 0.266 0.350 0.484 0.784 1.14 1.52 1.92 3.10 0 0.020 0.073 0.093 0.140 0.191 0.257 0.326 0.429 0.593 0.960 1.40 1.86 2.35 3.80 0 0.023 0.085 0.107 0.161 0.221 0.297 0.376 0.495 0.684 1.11 1.61 2.15 2.72 4.38 0 0.025 0.095 0.120 0.180 0.247 0.332 0.421 0.553 0.765 1.24 1.80 2.40 3.04 4.90 0 0.031 0.116 0.147 0.221 0.302 0.407 0.515 0.678 0.937 1.52 2.21 2.94 3.72 6.00 30-DC-12 2.20 2.69 3.11 3.48 3.81 4.12 4.40 5.39 6.22 6.96 8.52 Metric Units Disc 30-DC010 30-DC018 30-DC023 30-DC-01 30-DC015 30-DC-02 30-DC-03 30-DC-04 30-DC-05 30-DC-06 30-DC-07 30-DC-08 30-DC-10 30-DC-12 1 0,037 0,14 0,18 0,26 0,36 0,48 0,61 1,10 1,79 2,61 3,49 4,39 7,35 9,93 2 0,052 0,20 0,25 0,37 0,51 0,68 0,86 1,56 2,53 3,69 4,94 6,21 10,39 14,04 3 0,064 0,24 0,31 0,45 0,62 0,83 1,05 1,91 3,10 4,52 6,05 7,60 12,73 17,20 4 0,074 0,28 0,36 0,52 0,72 0,96 1,21 2,21 3,58 5,22 6,99 8,78 14,70 19,86 Flow L/min Pressure BAR 5 6 0,083 0,31 0,40 0,58 0,80 1,07 1,36 2,47 4,00 5,84 7,81 9,81 16,43 22,21 0,091 0,34 0,44 0,64 0,88 1,17 1,48 2,70 4,38 6,39 8,56 10,75 18,00 24,32 7 8 0,098 0,37 0,47 0,69 0,95 1,27 1,60 2,92 4,74 6,90 9,24 11,61 19,45 26,27 0,105 0,39 0,51 0,73 1,01 1,36 1,71 3,12 5,06 7,38 9,88 12,41 20,79 28,09 170 9 0,111 0,42 0,54 0,78 1,07 1,44 1,82 3,31 5,37 7,83 10,48 13,16 22,05 29,79 10 0,117 0,44 0,57 0,82 1,13 1,52 1,92 3,49 5,66 8,25 11,05 13,88 23,24 31,40 Common Use Fertilizer Pattern Stream Technology Round Orifice Material Polyacetal Spray Angle 0º Pressure Range 10-150 PSI (1-10 BAR) Configuration Disc Part Numbers Nozzles Nozzles (10 per bag) 30-DC-00 10BG-30-DC-00 30-DC010 10BG-30-DC010 30-DC018 10BG-30-DC018 30-DC023 10BG-30-DC023 30-DC-01 10BG-30-DC-01 30-DC-015 10BG-30-DC-015 30-DC-02 10BG-30-DC-02 30-DC-03 10BG-30-DC-03 30-DC-035 10BG-30-DC-035 30-DC-04 10BG-30-DC-04 30-DC-05 10BG-30-DC-05 30-DC-06 10BG-30-DC-06 30-DC-07 10BG-30-DC-07 30-DC-08 10BG-30-DC-08 30-DC-10 10BG-30-DC-10 30-DC-12 10BG-30-DC-12 Split Gasket (10 per bag) 10BG-1700-0255 The Albuz® ceramic disc regulates flow and produces a straight stream pattern. • Precision-molded in ceramic • Flexibility of flow rate is achieved through changing disc orientation “w” “n” US Units Disc AMT-15007 (n) AMT-15007 (w) AMT-15008 (n) AMT-15008 (w) AMT-15010 (n) AMT-15010 (w) AMT-15012 (n) AMT-15012 (w) AMT-15015 (n) AMT-15015 (w) AMT-15018 (n) AMT-15020 (n) AMT-15018 (w) AMT-15020 (w) AMT-15023 (n) AMT-15023 (w) 10 0.063 0.064 0.066 0.083 0.099 0.139 0.144 0.174 0.217 0.287 0.302 0.375 0.388 0.472 0.485 0.605 15 0.077 0.078 0.080 0.101 0.121 0.170 0.176 0.213 0.265 0.351 0.370 0.459 0.475 0.577 0.594 0.741 20 0.088 0.091 0.093 0.117 0.140 0.197 0.203 0.246 0.306 0.405 0.427 0.530 0.548 0.667 0.686 0.856 25 0.099 0.101 0.104 0.130 0.157 0.220 0.227 0.275 0.342 0.453 0.478 0.593 0.613 0.746 0.767 0.957 30 0.108 0.111 0.113 0.143 0.171 0.241 0.249 0.301 0.375 0.496 0.523 0.650 0.671 0.817 0.840 1.05 PSI 35 0.117 0.120 0.123 0.154 0.185 0.260 0.268 0.326 0.405 0.536 0.565 0.702 0.725 0.882 0.907 1.13 AMT-15007 (n) AMT-15007 (w) AMT-15008 (n) AMT-15008 (w) AMT-15010 (n) AMT-15010 (w) AMT-15012 (n) AMT-15012 (w) AMT-15015 (n) AMT-15015 (w) AMT-15018 (n) AMT-15020 (n) AMT-15018 (w) AMT-15020 (w) AMT-15023 (n) AMT-15023 (w) 40 0.125 0.128 0.131 0.165 0.198 0.278 0.287 0.348 0.433 0.573 0.604 0.750 0.775 0.943 0.970 1.21 60 0.153 0.157 0.160 0.202 0.242 0.340 0.352 0.426 0.530 0.702 0.740 0.919 0.949 1.15 1.19 1.48 Features 80 0.177 0.181 0.185 0.233 0.280 0.393 0.406 0.492 0.612 0.810 0.854 1.06 1.10 1.33 1.37 1.71 100 0.198 0.202 0.207 0.261 0.313 0.440 0.454 0.550 0.685 0.906 0.955 1.19 1.23 1.49 1.53 1.91 150 0.242 0.248 0.254 0.320 0.383 0.538 0.556 0.674 0.839 1.11 1.17 1.45 1.50 1.83 1.88 2.34 200 0.280 0.286 0.293 0.369 0.443 0.622 0.642 0.778 0.968 1.28 1.35 1.68 1.73 2.11 2.17 2.71 300 0.342 0.351 0.359 0.452 0.542 0.761 0.786 0.953 1.19 1.57 1.65 2.05 2.12 2.58 2.66 3.31 725 0.532 0.545 0.558 0.702 0.843 1.18 1.22 1.48 1.84 2.44 2.57 3.19 3.30 4.01 4.13 5.15 Common Use Fertilizer Pattern Stream Technology Round Orifice Material Ceramic Spray Angle 0º Pressure Range 10-725 PSI (1-50 BAR) Configuration Disc Part Numbers Nozzles AMT-15007 AMT-15008 Metric Units Disc US Gallon/Min 0.7 0.238 0.242 0.250 0.314 0.375 0.526 0.545 0.659 0.821 1.086 1.143 1.420 1.469 1.787 1.836 2.290 1.0 0.291 0.295 0.303 0.382 0.458 0.644 0.666 0.806 1.003 1.329 1.401 1.738 1.798 2.184 2.249 2.805 1.4 0.333 0.344 0.352 0.443 0.530 0.746 0.768 0.931 1.158 1.533 1.616 2.006 2.074 2.525 2.597 3.240 1.7 0.375 0.382 0.394 0.492 0.594 0.833 0.859 1.041 1.295 1.715 1.809 2.245 2.320 2.824 2.903 3.623 2.1 0.409 0.420 0.428 0.541 0.647 0.912 0.943 1.139 1.420 1.878 1.980 2.461 2.540 3.093 3.180 3.975 2.4 0.443 0.454 0.466 0.583 0.700 0.984 1.014 1.234 1.533 2.029 2.139 2.657 2.744 3.339 3.433 4.278 Liters/Min Bar 2.8 4.1 0.473 0.485 0.496 0.625 0.750 1.052 1.086 1.317 1.639 2.169 2.286 2.839 2.934 3.570 3.672 4.580 0.579 0.594 0.606 0.765 0.916 1.287 1.332 1.613 2.006 2.657 2.801 3.479 3.592 4.353 4.505 5.602 AMT-15010 5.5 0.670 0.685 0.700 0.882 1.060 1.488 1.537 1.862 2.317 3.066 3.233 4.013 4.164 5.035 5.186 6.473 6.9 0.750 0.765 0.784 0.988 1.185 1.666 1.719 2.082 2.593 3.430 3.615 4.505 4.656 5.640 5.792 7.230 10.3 0.916 0.939 0.961 1.211 1.450 2.037 2.105 2.551 3.176 4.202 4.429 5.489 5.678 6.927 7.117 8.858 13.8 1.060 1.083 1.109 1.397 1.677 2.355 2.430 2.945 3.664 4.845 5.110 6.359 6.549 7.987 8.214 10.258 20.7 1.295 1.329 1.359 1.711 2.052 2.881 2.975 3.607 4.505 5.943 6.246 7.760 8.025 9.766 10.069 12.530 50.0 2.014 2.063 2.112 2.657 3.191 4.467 4.618 5.602 6.965 9.236 9.729 12.075 12.492 15.180 15.634 19.495 AMT-15012 AMT-15015 AMT-15018 AMT-15020 AMT-15023 w - Numbers can be read on face of disc when installed in cap n - Numbers on disc cannot be read when installed in cap Photos above show the disc exit side. Albuz® is a registered trademark of SAINT-GOBAIN SOLCERA, SAINT GOBAIN CERAMIQUES AVANCEES DESMARQUEST, CERAMIQUES TECHNIQUES DESMARQUEST, and SOCIETE DESMARQUEST ET CEC.. Hypro® is a registered trademark of Pentair. 171 STREAMING SPRAY NOZZLES Flow Regulating Disc AMT 0 o Hollow Cone - SwirlTip Disc & Cores 25 -110 o o The Hypro SwirlTip disc and core hollow-cone spray nozzles produce finely atomized droplets. • Hollow cone pattern in a variety of spray pattern widths Disc • Discs conveniently packaged in a quantity of ten Core US Units Disc Core Spray Angle Color Disc/Core at 40 PSI 50 Gray/Red 55 Black/Red 65 Brown/Red 70 Orange/Red 80 Red/Red 45 Gray/LightBlue 50 Black/LightBlue 70 Brown/LightBlue 70 Orange/LightBlue 80 Red/LightBlue 90 Blue/LightBlue 90 Yellow/LightBlue 25 Gray/Yellow 40 Black/Yellow 50 Brown/Yellow 60 Orange/Yellow 75 Red/Yellow 80 Blue/Yellow 85 Yellow/Yellow 90 Green/Yellow 95 White/Yellow 100 LimeGreen/Yellow 110 RoyalBlue/Yellow 25 Gray/Green 35 Black/Green 45 Brown/Green 55 Orange/Green 70 Red/Green 75 Blue/Green 80 Yellow/Green 85 Green/Green 90 White/Green 95 LimeGreen/Green 100 RoyalBlue/Green 30-DC-01 30-DC-015 30-DC-02 30-DC-03 30-DC-04 30-DC-01 30-DC-015 30-DC-02 30-DC-03 30-DC-04 30-DC-05 30-DC-06 30-DC-01 30-DC-015 30-DC-02 30-DC-03 30-DC-04 30-DC-05 30-DC-06 30-DC-07 30-DC-08 30-DC-10 30-DC-12 30-DC-01 30-DC-015 30-DC-02 30-DC-03 30-DC-04 30-DC-05 30-DC-06 30-DC-07 30-DC-08 30-DC-10 30-DC-12 30-CR-13 30-CR-13 30-CR-13 30-CR-13 30-CR-13 30-CR-23 30-CR-23 30-CR-23 30-CR-23 30-CR-23 30-CR-23 30-CR-23 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-45 30-CR-45 30-CR-45 30-CR-45 30-CR-45 30-CR-45 30-CR-45 30-CR-45 30-CR-45 30-CR-45 30-CR-45 DC/CR Disc Core 40 PSI 50 PSI 60 PSI 70 PSI 80 PSI F F F F F F M F F F F M M M M C C F M M M M M C C C F F F F F F F F F F F F M M M C C F F M M M M M C C VF VF F F F F F F F F F F M M M C C F F F M M M M M C VF VF VF F F F F VF F F F F F M M C C VF F F F M M M M M VF VF VF VF F F F VF VF VF F F F M M M C VF VF F F F M M M M 30-DC-01/30-CR-23 30-DC-015/30-CR-23 30-DC-02/30-CR-23 30-DC-03/30-CR-23 30-DC-04/30-CR-23 30-DC-05/30-CR-23 30-DC-06/30-CR-23 30-DC-01/30-CR-25 30-DC-015/30-CR-25 30-DC-02/30-CR-25 30-DC-03/30-CR-25 30-DC-04/30-CR-25 30-DC-05/30-CR-25 30-DC-06/30-CR-25 30-DC-07/30-CR-25 30-DC-08/30-CR-25 30-DC-10/30-CR-25 30-DC-01/30-CR-45 30-DC-015/30-CR-45 30-DC-02/30-CR-45 30-DC-03/30-CR-45 30-DC-04/30-CR-45 30-DC-05/30-CR-45 30-DC-06/30-CR-45 30-DC-07/30-CR-45 30-DC-081/30-CR-45 US Gallon/Min 10 0.06 0.06 0.08 0.09 0.10 0.09 0.14 0.18 0.23 0.25 0.30 0.38 0.46 0.18 0.23 0.29 0.34 0.41 0.55 0.67 20 0.06 0.06 0.08 0.08 0.08 0.11 0.13 0.15 0.11 0.13 0.19 0.25 0.32 0.35 0.42 0.53 0.65 0.14 0.16 0.25 0.32 0.41 0.48 0.58 0.78 0.95 30 40 0.06 0.06 0.07 0.08 0.10 0.06 0.07 0.09 0.10 0.13 0.16 0.18 0.09 0.11 0.13 0.16 0.24 0.30 0.39 0.43 0.52 0.65 0.80 0.14 0.17 0.20 0.30 0.39 0.50 0.58 0.71 0.95 1.16 0.07 0.07 0.08 0.09 0.12 0.07 0.09 0.11 0.12 0.15 0.18 0.21 0.10 0.13 0.16 0.19 0.28 0.35 0.45 0.50 0.60 0.75 0.93 0.12 0.16 0.20 0.23 0.35 0.45 0.58 0.68 0.83 1.10 1.34 90 PSI 100 PSI 125 PSI VF VF VF VF F F F VF VF VF VF F F M M M M VF VF VF F F F M M M VF VF VF VF VF F F VF VF VF VF F F F M M M VF VF VF VF F F M M M VF VF VF VF VF VF F VF VF VF VF VF VF F F M M VF VF VF VF VF F F M M 150 PSI VF VF VF VF VF VF VF VF VF VF VF VF VF F F M M VF VF VF VF VF VF F F M Droplet size based on ASABE S572.1 standard. 172 PSI 60 0.08 0.09 0.10 0.11 0.14 0.09 0.10 0.13 0.14 0.19 0.22 0.25 0.12 0.16 0.19 0.23 0.34 0.43 0.55 0.61 0.73 0.92 1.13 0.15 0.20 0.24 0.28 0.43 0.55 0.70 0.83 1.01 1.35 1.64 80 0.09 0.10 0.12 0.12 0.17 0.10 0.12 0.15 0.16 0.22 0.25 0.29 0.14 0.19 0.22 0.27 0.39 0.49 0.64 0.71 0.85 1.06 1.31 0.17 0.23 0.28 0.32 0.49 0.64 0.81 0.95 1.17 1.56 1.90 100 0.10 0.11 0.13 0.14 0.19 0.11 0.13 0.17 0.18 0.24 0.28 0.33 0.16 0.21 0.25 0.30 0.43 0.55 0.71 0.79 0.95 1.19 1.46 0.19 0.25 0.32 0.36 0.55 0.71 0.91 1.07 1.30 1.74 2.12 150 0.13 0.14 0.16 0.17 0.23 0.14 0.16 0.21 0.22 0.30 0.35 0.40 0.19 0.26 0.30 0.36 0.53 0.68 0.87 0.97 1.16 1.45 1.79 0.23 0.31 0.39 0.44 0.68 0.87 1.11 1.31 1.60 2.13 2.60 BANDING AND DIRECTED SPRAY NOZZLES Metric Units Disc 30-DC-01 30-DC-015 30-DC-02 30-DC-03 30-DC-04 30-DC-01 30-DC-015 30-DC-02 30-DC-03 30-DC-04 30-DC-05 30-DC-06 30-DC-01 30-DC-015 30-DC-02 30-DC-03 30-DC-04 30-DC-05 30-DC-06 30-DC-07 30-DC-08 30-DC-10 30-DC-12 30-DC-01 30-DC-015 30-DC-02 30-DC-03 30-DC-04 30-DC-05 30-DC-06 30-DC-07 30-DC-08 30-DC-10 30-DC-12 DC/CR Disc Core 30-DC-01/30-CR-23 30-DC-02/30-CR-23 30-DC-03/30-CR-23 30-DC-04/30-CR-23 30-DC-05/30-CR-23 30-DC-06/30-CR-23 30-DC-01/30-CR-25 30-DC-015/30-CR-25 30-DC-02/30-CR-25 30-DC-03/30-CR-25 30-DC-04/30-CR-25 30-DC-05/30-CR-25 30-DC-06/30-CR-25 30-DC-07/30-CR-25 30-DC-08/30-CR-25 30-DC-10/30-CR-25 30-DC-01/30-CR-45 30-DC-015/30-CR-45 30-DC-02/30-CR-45 30-DC-03/30-CR-45 30-DC-04/30-CR-45 30-DC-05/30-CR-45 30-DC-06/30-CR-45 30-DC-07/30-CR-45 30-DC-081/30-CR-45 Core 30-CR-13 30-CR-13 30-CR-13 30-CR-13 30-CR-13 30-CR-23 30-CR-23 30-CR-23 30-CR-23 30-CR-23 30-CR-23 30-CR-23 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-25 30-CR-45 30-CR-45 30-CR-45 30-CR-45 30-CR-45 30-CR-45 30-CR-45 30-CR-45 30-CR-45 30-CR-45 30-CR-45 Color Disc/Core Spray Angle at 2,75 BAR 50 55 65 70 80 45 50 70 70 80 90 90 25 40 50 60 75 80 85 90 95 100 110 25 35 45 55 70 75 80 85 90 95 100 1 Gray/Red Black/Red Brown/Red Orange/Red Red/Red Gray/LightBlue Black/LightBlue Brown/LightBlue Orange/LightBlue Red/LightBlue Blue/LightBlue Yellow/LightBlue Gray/Yellow Black/Yellow Brown/Yellow Orange/Yellow Red/Yellow Blue/Yellow Yellow/Yellow Green/Yellow White/Yellow LimeGreen/Yellow RoyalBlue/Yellow Gray/Green Black/Green Brown/Green Orange/Green Red/Green Blue/Green Yellow/Green Green/Green White/Green LimeGreen/Green RoyalBlue/Green 0,16 0,17 0,18 0,21 0,27 0,16 0,21 0,23 0,27 0,34 0,41 0,48 0,23 0,30 0,36 0,43 0,66 0,80 1,00 1,18 1,39 1,73 2,12 0,28 0,37 0,46 0,53 0,82 1,03 1,32 1,55 1,92 2,54 3,10 2 0,22 0,24 0,26 0,29 0,38 0,23 0,29 0,32 0,38 0,48 0,58 0,68 0,33 0,42 0,51 0,61 0,93 1,13 1,42 1,67 1,97 2,45 3,00 0,39 0,52 0,65 0,74 1,16 1,45 1,87 2,19 2,71 3,59 4,38 3 0,27 0,29 0,32 0,36 0,47 0,28 0,36 0,39 0,47 0,59 0,71 0,83 0,40 0,52 0,63 0,75 1,14 1,38 1,74 2,05 2,41 3,00 3,67 0,48 0,64 0,80 0,91 1,42 1,78 2,29 2,68 3,32 4,40 5,37 Flow L/min Pressure BAR 4 5 0,31 0,33 0,37 0,42 0,54 0,32 0,42 0,45 0,54 0,68 0,82 0,96 0,46 0,60 0,73 0,87 1,32 1,59 2,01 2,37 2,78 3,46 4,24 0,55 0,74 0,92 1,05 1,64 2,06 2,64 3,09 3,83 5,08 6,20 2.5 BAR 3 BAR 3.5 BAR 4 BAR 4.5 BAR 5 BAR 5.5 BAR 6 BAR F F F F M M F F F M M M M M C C M M M M M M C C C F F F F F M F F F F M M M M C C F M M M M M M C C F F F F F F F F F F F M M M C C F F M M M M M C C VF F F F F F F F F F F M M M C C F F F M M M M M C VF VF F F F F VF F F F F M M M C C F F F F M M M M C VF VF F F F F VF VF F F F M M M C C VF F F F M M M M M VF VF VF F F F VF VF VF F F F M M M C VF VF F F M M M M M VF VF VF F F F VF VF VF VF F F M M M M VF VF VF F F M F M M Droplet size based on ASABE S572.1 standard. 173 0,35 0,37 0,41 0,46 0,61 0,36 0,46 0,50 0,61 0,76 0,92 1,07 0,52 0,67 0,81 0,97 1,47 1,78 2,25 2,65 3,11 3,87 4,74 0,62 0,83 1,03 1,17 1,83 2,30 2,96 3,46 4,29 5,68 6,93 Features 6 0,38 0,41 0,45 0,51 0,66 0,40 0,51 0,55 0,66 0,83 1,00 1,17 0,57 0,74 0,89 1,06 1,61 1,95 2,46 2,90 3,41 4,24 5,19 0,68 0,91 1,13 1,29 2,01 2,52 3,24 3,79 4,70 6,22 7,59 8 0,44 0,47 0,52 0,59 0,77 0,46 0,59 0,64 0,77 0,96 1,16 1,36 0,65 0,85 1,03 1,22 1,86 2,25 2,84 3,35 3,94 4,90 5,99 0,78 1,05 1,31 1,49 2,32 2,91 3,74 4,38 5,42 7,19 8,77 10 0,49 0,53 0,58 0,66 0,86 0,51 0,66 0,71 0,86 1,08 1,30 1,52 0,73 0,95 1,15 1,37 2,08 2,52 3,18 3,74 4,40 5,48 6,70 0,88 1,17 1,46 1,66 2,59 3,25 4,18 4,89 6,06 8,03 9,80 Common Use Plant Health Pattern Hollow Cone Technology Swirl Material Polyacetal Spray Angle 25º - 110º Pressure Range 10-150 PSI (1-10 BAR) Configuration Nozzle Part Numbers Discs Discs (10 per Bag) Cores 30-DC-01 10BG-30-DC-01 30-CR-13 30-DC-015 10BG-30-DC-015 30-CR-23 30-DC-02 10BG-30-DC-02 30-CR-25 30-DC-03 10BG-30-DC-03 30-CR-45 30-DC-04 10BG-30-DC-04 – 30-DC-05 10BG-30-DC-05 – 30-DC-06 10BG- 30-DC-06 – 30-DC-07 10BG-30-DC-07 – 30-DC-08 10BG-30-DC-08 – 30-DC-10 10BG-30-DC-10 – 30-DC-12 10BG-30-DC-12 – Hollow Cone - Ceramic Disc & Cores 13 - 93 o o Albuz® ceramic discs and cores are the longest lasting disc-core nozzles, making them ideal for abrasive agricultural and horticultural sprays. DCC/ CRC nozzles will outlast stainless steel disc-core nozzles by up to 10 times and perform superbly at high pressures, common on many air-blast and directed sprayers. US Units DISC DCC-01 DCC-02 DCC-03 DCC-04 DCC-01 DCC-02 DCC-03 DCC-04 DCC-05 DCC-06 DCC-01 DCC-02 DCC-03 DCC-04 DCC-05 DCC-06 DCC-07 DCC-01 DCC-02 DCC-03 DCC-04 DCC-05 DCC-06 DCC-07 DCC-01 DCC-02 DCC-03 DCC-04 DCC-05 DCC-06 DCC-07 Hollow Cone CORE CRC-13 CRC-13 CRC-13 CRC-13 CRC-23 CRC-23 CRC-23 CRC-23 CRC-23 CRC-23 CRC-25 CRC-25 CRC-25 CRC-25 CRC-25 CRC-25 CRC-25 CRC-45 CRC-45 CRC-45 CRC-45 CRC-45 CRC-45 CRC-45 CRC-46 CRC-46 CRC-46 CRC-46 CRC-46 CRC-46 CRC-46 10 0.07 0.065 0.082 0.095 0.112 0.10 0.15 0.18 0.23 0.26 0.18 0.23 0.29 0.33 0.28 0.38 0.55 - 20 0.064 0.071 0.09 0.078 0.087 0.113 0.13 0.15 0.12 0.14 0.21 0.25 0.32 0.37 0.14 0.17 0.25 0.32 0.41 0.48 0.23 0.39 0.54 0.78 0.98 30 0.059 0.075 0.08 0.11 0.064 0.092 0.10 0.14 0.16 0.19 0.088 0.14 0.17 0.25 0.30 0.39 0.45 0.18 0.20 0.31 0.39 0.50 0.59 0.24 0.28 0.48 0.66 0.95 1.22 Flow Rate GPM at Pressure, PSI 40 60 80 100 0.066 0.08 0.09 0.12 0.072 0.10 0.12 0.15 0.18 0.21 0.101 0.16 0.19 0.29 0.35 0.44 0.52 0.125 0.20 0.23 0.36 0.45 0.58 0.68 0.145 0.27 0.32 0.56 0.77 1.10 1.39 0.078 0.10 0.11 0.14 0.080 0.13 0.14 0.19 0.22 0.26 0.122 0.19 0.23 0.35 0.42 0.54 0.63 0.148 0.25 0.28 0.43 0.55 0.72 0.84 0.178 0.33 0.39 0.68 0.94 1.35 1.72 0.088 0.11 0.12 0.16 0.096 0.14 0.16 0.21 0.25 0.29 0.138 0.22 0.26 0.40 0.48 0.62 0.73 0.170 0.28 0.33 0.50 0.64 0.83 0.97 0.205 0.37 0.45 0.78 1.10 1.58 1.97 0.097 0.12 0.13 0.17 0.107 0.16 0.18 0.23 0.28 0.32 0.156 0.25 0.29 0.45 0.54 0.70 0.81 0.190 0.32 0.36 0.56 0.71 0.93 1.11 0.23 0.42 0.51 0.88 1.25 1.73 2.22 150 0.115 0.14 0.16 0.20 0.124 0.19 0.21 0.28 0.34 0.39 0.185 0.29 0.35 0.54 0.65 0.85 0.98 0.225 0.38 0.44 0.68 0.86 1.15 0.14 0.28 0.50 0.61 1.07 1.50 2.16 2.73 200 0.128 0.16 0.18 0.23 0.139 0.21 0.24 0.32 0.38 0.45 0.210 0.34 0.40 0.62 0.75 0.97 1.18 0.257 0.44 0.51 0.78 0.99 1.33 1.57 0.32 0.57 0.70 1.23 1.73 2.50 3.15 300 0.152 0.18 0.20 0.27 0.164 0.25 0.28 0.38 0.46 0.54 0.255 0.41 0.48 0.75 0.90 1.19 1.37 0.310 0.53 0.62 0.95 1.22 1.64 1.94 0.39 0.68 0.86 1.52 2.13 3.06 3.85 Spray Angle Degrees Pressure, PSI 20 40 80 49 53 69 51 58 68 79 84 39 52 67 73 79 85 32 40 62 67 73 81 14 23 33 42 48 51 67 70 79 47 63 69 82 89 93 27 51 61 74 79 85 91 22 46 53 69 73 79 86 13 18 20 29 39 48 53 62 72 75 83 58 70 75 87 94 98 43 58 67 80 84 89 93 34 55 60 72 76 81 87 15 21 24 33 42 50 56 Albuz® is a registered trademark of SAINT-GOBAIN SOLCERA, SAINT GOBAIN CERAMIQUES AVANCEES DESMARQUEST, CERAMIQUES TECHNIQUES DESMARQUEST, and SOCIETE DESMARQUEST ET CEC. Hypro® is a registered trademark of Pentair. 174 BANDING AND DIRECTED SPRAY NOZZLES Metric Units DISC DCC-01 DCC-02 DCC-03 DCC-04 DCC-01 DCC-02 DCC-03 DCC-04 DCC-05 DCC-06 DCC-01 DCC-02 DCC-03 DCC-04 DCC-05 DCC-06 DCC-07 DCC-01 DCC-02 DCC-03 DCC-04 DCC-05 DCC-06 DCC-07 DCC-01 DCC-02 DCC-03 DCC-04 DCC-05 DCC-06 DCC-07 Hollow Cone CORE CRC-13 CRC-13 CRC-13 CRC-13 CRC-23 CRC-23 CRC-23 CRC-23 CRC-23 CRC-23 CRC-25 CRC-25 CRC-25 CRC-25 CRC-25 CRC-25 CRC-25 CRC-45 CRC-45 CRC-45 CRC-45 CRC-45 CRC-45 CRC-45 CRC-46 CRC-46 CRC-46 CRC-46 CRC-46 CRC-46 CRC-46 Flow Rate, LPM 3 4 0.280 0.320 0.360 0.47 0.280 0.390 0.470 0.590 0.710 0.830 0.400 0.63 0.75 1.14 1.36 1.74 2.05 0.490 0.79 0.91 1.42 1.78 2.29 2.68 0.570 1.07 1.26 2.21 3.04 4.34 5.49 0.290 0.370 0.410 0.52 0.300 0.480 0.520 0.710 0.82 0.97 0.420 0.71 0.86 1.30 1.56 2.01 2.34 0.550 0.93 1.04 1.60 2.05 2.68 3.13 0.660 1.23 1.45 2.53 3.50 5.02 6.40 at Pressure BAR 5 6 10 0.320 0.400 0.43 0.58 0.350 0.500 0.58 0.76 0.90 1.04 0.500 0.79 0.94 1.44 1.73 2.23 2.63 0.610 1.01 1.19 1.80 2.31 2.99 3.50 0.740 1.33 1.62 2.81 3.96 5.69 7.10 0.340 0.42 0.48 0.60 0.380 0.56 0.64 0.81 0.99 1.13 0.550 0.88 1.02 1.59 1.91 2.47 2.86 0.670 1.13 1.27 1.98 2.51 3.28 3.92 0.810 1.48 1.80 3.11 4.41 6.11 7.84 0.430 0.52 0.60 0.74 0.480 0.71 0.78 1.04 1.27 1.45 0.690 1.08 1.30 2.01 2.42 3.16 3.85 0.840 1.41 1.84 2.53 3.20 4.28 5.02 1.040 1.86 2.27 3.98 5.58 8.04 10.16 15 20 0.510 0.63 0.71 0.91 0.550 0.83 0.95 1.26 1.50 1.78 0.830 1.34 1.58 2.45 2.96 3.83 4.66 1.010 1.74 2.01 3.08 3.91 5.25 6.20 1.260 2.25 2.76 4.85 6.83 9.87 12.43 0.570 0.67 0.74 1.00 0.610 0.93 1.04 1.41 1.71 2.01 0.950 1.53 1.79 2.79 3.35 4.43 5.10 1.150 1.97 2.31 3.54 4.54 6.10 7.22 1.45 2.53 3.20 5.86 7.93 11.39 14.33 Spray Angle Degrees Pressure, BAR 10 20 66 74 77 84 63 72 77 88 96 100 49 61 69 82 85 89 92 39 58 62 73 76 80 86 17 20 23 32 41 49 55 175 68 75 78 85 65 72 77 87 95 99 51 61 69 82 84 88 91 40 58 62 72 75 79 85 17 18 21 31 40 47 53 Features Common Use Plant Heath Pattern Hollow Cone Technology Swirl Material Ceramic Spray Angle 13º-93º Pressure Range 10-300 PSI (1-20 BAR) Configuration Nozzle Part Numbers Discs Cores Caps (25 Pack) DCC-01 CRC-13 CAP05-20 DCC-02 CRC-23 CAP05-20 DCC-03 CRC-45 CAP05-20 DCC-04 CRC-46 CAP05-20 DCC-05 – CAP05-20 DCC-06 – CAP05-20 DCC-07 – CAP05-20 Hollow Cone - HCX 80 o The Hypro Hollow-Cone spray nozzles are excellent for fungicide and insecticide application. The HCX produces finely atomized droplets in a hollow-cone, 80-degree pattern. • Precision-molded in polyacetal for durable product life • Wide operating pressure US Units Spray Nozzle 40 30HCX2 30HCX3 30HCX4 30HCX6 30HCX8 30HCX9 30HCX10 30HCX12 30HCX18 0.030 0.050 0.070 0.102 0.133 0.148 0.164 0.203 0.300 50 0.034 0.056 0.078 0.114 0.149 0.165 0.183 0.227 0.335 HCX80º - Hollow Cone 60 70 0.037 0.061 0.086 0.125 0.163 0.181 0.201 0.249 0.367 80 0.040 0.066 0.093 0.135 0.176 0.196 0.217 0.269 0.397 0.042 0.071 0.099 0.144 0.188 0.209 0.232 0.287 0.424 Flow Rate, GPM at Pressure,PSI 90 100 0.045 0.075 0.105 0.153 0.200 0.222 0.246 0.305 0.450 0.047 0.079 0.111 0.161 0.210 0.234 0.259 0.321 0.474 Features 110 0.050 0.083 0.116 0.169 0.221 0.245 0.272 0.337 0.497 0.052 0.087 0.121 0.177 0.230 0.256 0.284 0.352 0.520 130 0.054 0.090 0.126 0.184 0.240 0.267 0.296 0.366 0.541 140 0.056 0.094 0.131 0.191 0.249 0.277 0.307 0.380 0.561 150 0.058 0.097 0.136 0.198 0.258 0.287 0.318 0.393 0.581 Common Use Plant Health Pattern Hollow Cone Technology Swirl Material Polyacetal Spray Angle 80º Pressure Range 40-150 PSI (3-10 BAR) Configuration Nozzle Part Numbers 40 PSI 50 PSI 60 PSI 70 PSI 80 PSI 90 PSI 100 PSI 125 PSI 150 PSI F F F M F F F F F F F F F VF F F F F F F F F VF F VF F F F F F F VF VF VF VF F VF F F F VF VF VF VF F VF F F F VF VF VF VF F VF F F F VF VF VF VF F VF VF F F VF VF VF VF VF VF VF VF F VF VF VF VF VF 30HCX2 30HCX3 30HCX4 30HCX6 30HCX8 30HCX9 30HCX10 30HCX12 30HCX18 120 Nozzles 80º Caps (25 Pack) 30HCX2 CAP04-20 30HCX3 CAP04-20 30HCX4 CAP04-20 30HCX6 CAP04-20 30HCX8 CAP04-20 Droplet size based on ASABE S572.1 standard. 30HCX9 CAP04-20 Metric Units 30HCX10 CAP04-20 30HCX12 CAP04-20 30HCX18 CAP04-20 Spray Nozzle 30HCX2 30HCX3 30HCX4 30HCX6 30HCX8 30HCX9 30HCX10 30HCX12 30HCX18 3 0,132 0,199 0,265 0,397 0,530 0,596 0,662 0,750 1,180 3,5 0,143 0,215 0,286 0,429 0,572 0,644 0,715 0,810 1,275 HCX80º - Hollow Cone 30HCX2 30HCX3 30HCX4 30HCX6 30HCX8 30HCX9 30HCX10 30HCX12 30HCX18 4 4,5 0,152 0,230 0,306 0,458 0,612 0,688 0,764 0,866 1,363 5 0,162 0,244 0,325 0,486 0,649 0,730 0,811 0,919 1,445 0,170 0,257 0,342 0,513 0,684 0,769 0,855 0,968 1,523 Flow L/min Pressure BAR 5,5 6 0,179 0,269 0,359 0,538 0,718 0,807 0,896 1,016 1,598 3 BAR 4 BAR 5 BAR 6 BAR 7 BAR 8 BAR 9 BAR F F F M F F F F F F F F F F F VF F F F F F F VF VF VF VF F VF F F F VF VF VF VF F VF F F F VF VF VF VF F VF VF F F VF VF VF VF VF VF VF VF F VF VF VF VF VF 0,187 0,281 0,375 0,561 0,750 0,843 0,936 1,061 1,669 6,5 0,194 0,293 0,390 0,584 0,780 0,877 0,974 1,104 1,737 10 BAR 11 BAR VF VF VF F VF VF VF VF VF VF VF VF F VF VF VF VF VF Droplet size based on ASABE S572.1 standard. 176 7 0,202 0,304 0,405 0,606 0,810 0,910 1,011 1,146 1,802 8 0,216 0,325 0,433 0,648 0,865 0,973 1,081 1,225 1,927 9 0,229 0,345 0,459 0,688 0,918 1,032 1,147 1,299 2,044 10 0,241 0,363 0,484 0,725 0,968 1,088 1,209 1,369 2,154 The Albuz® hollow-cone ceramic spray nozzles produce finely atomized droplets in a hollow-cone, 80-degree pattern. • Easily separated, two-piece construction for simple cleaning • Wide operating pressure range suitable for many applications • Commonly used in airblast and other high pressure spraying applications US Units Spray Nozzle 40 ATR-WHITE ATR-LILAC ATR-BROWN ATR-YELLOW ATR-ORANGE ATR-RED ATR-GRAY ATR-GREEN ATR-BLACK ATR-BLUE 0.053 0.071 0.095 0.144 0.196 0.275 0.299 0.356 0.399 0.488 ATR 80º - Hollow Cone 50 60 0.060 0.079 0.106 0.161 0.218 0.306 0.333 0.395 0.443 0.542 0.065 0.087 0.116 0.176 0.239 0.333 0.362 0.430 0.483 0.591 70 80 0.070 0.093 0.125 0.189 0.257 0.359 0.390 0.463 0.520 0.636 0.075 0.099 0.133 0.202 0.274 0.382 0.415 0.493 0.554 0.678 Flow Rate, GPM at Pressure,PSI 90 100 0.079 0.105 0.141 0.214 0.290 0.404 0.439 0.521 0.585 0.716 0.083 0.111 0.148 0.226 0.306 0.425 0.461 0.547 0.615 0.753 Features 120 150 0.091 0.121 0.161 0.247 0.334 0.463 0.502 0.596 0.671 0.821 0.101 0.134 0.180 0.275 0.372 0.515 0.558 0.662 0.745 0.913 200 250 0.116 0.154 0.206 0.317 0.428 0.591 0.638 0.758 0.854 1.046 0.129 0.171 0.230 0.354 0.477 0.657 0.709 0.842 0.949 1.163 300 350 0.141 0.187 0.250 0.387 0.521 0.716 0.773 0.918 1.034 1.268 0.152 0.201 0.270 0.417 0.561 0.771 0.831 0.987 1.113 1.364 Technology Swirl Material Ceramic Spray Angle 80º Pressure Range 40-350 PSI (3-24 BAR) Configuration Nozzle Part Numbers ATR 80° Caps (25 Pack) 50 PSI 60 PSI 70 PSI 80 PSI 90 PSI 100 PSI 125 PSI 150 PSI 350 PSI ATR-WHITE CAP05-20 VF VF VF VF F F F F F M VF VF VF VF VF F F F F M VF VF VF VF VF F F F F M VF VF VF VF VF VF F F F F VF VF VF VF VF VF VF VF F F VF VF VF VF VF VF VF VF F F VF VF VF VF VF VF VF VF F F VF VF VF VF VF VF VF VF F F VF VF VF VF VF VF VF VF VF F ATR-LILAC CAP05-20 ATR-BROWN CAP05-20 ATR-YELLOW CAP05-20 ATR-ORANGE CAP05-20 ATR-RED CAP05-20 ATR-GRAY CAP05-20 ATR-GREEN CAP05-20 ATR-BLACK CAP05-20 ATR-BLUE CAP05-20 Metric Units 5 0.27 0.36 0.48 0.73 0.99 1.38 1.50 1.78 2.00 2.45 6 0.29 0.39 0.52 0.80 1.08 1.51 1.63 1.94 2.18 2.67 7 0.32 0.42 0.56 0.86 1.17 1.62 1.76 2.09 2.35 1.87 ATR 80º - Hollow Cone ATR- White ATR- Lilac ATR- Brown ATR- Yellow ATR- Orange ATR- Red ATR- Gray ATR- Green ATR-Black ATR- Blue Hollow Cone VF VF VF F F F F F F M Droplet size based on ASABE S572.1 standard. ATR-WHITE ATR-LILAC ATR-BROWN ATR-YELLOW ATR-ORANGE ATR-RED ATR-GRAY ATR-GREEN ATR-BLACK ATR-BLUE Plant Health Pattern 40 PSI ATR- White ATR- Lilac ATR- Brown ATR- Yellow ATR- Orange ATR- Red ATR- Gray ATR- Green ATR-Black ATR- Blue Spray Nozzle Common Use 8 0.34 0.45 0.60 0.92 1.24 1.73 1.87 2.22 2.50 3.06 9 0.36 0.48 0.64 0.97 1.32 1.83 1.98 2.35 2.64 3.24 10 0.38 0.50 0.67 1.03 1.39 1.92 2.08 2.47 2.80 3.40 11 0.39 0.52 0.70 1.07 1.45 2.01 2.17 2.58 2.90 3.56 12 0.41 0.55 0.73 1.12 1.51 2.09 2.26 2.69 3.03 3.71 Flow Rate, LPM at Pressure, Bar 13 14 15 16 17 0.43 0.57 0.76 1.17 2.57 2.17 2.35 2.79 3.14 3.85 3 Bar 5 Bar 7 Bar 10 Bar 15 Bar 20 Bar VF VF VF F F F F F F M VF VF VF VF VF F F F F M VF VF VF VF VF VF F F F F VF VF VF VF VF VF VF VF F F VF VF VF VF VF VF VF VF VF F VF VF VF VF VF VF VF VF VF F 0.44 0.59 0.79 1.21 1.63 2.25 2.43 2.89 3.26 3.99 0.46 0.61 0.81 1.25 1.69 2.33 2.51 2.99 3.36 4.12 0.47 0.63 0.84 1.29 1.74 2.40 2.59 3.08 3.47 4.25 0.48 0.64 0.86 1.33 1.79 2.47 2.67 3.17 3.57 4.37 18 0.50 0.66 0.89 1.37 1.84 2.54 2.74 3.25 3.67 4.49 19 0.51 0.68 0.91 1.40 1.89 2.60 2.81 3.34 3.76 4.61 20 0.52 0.70 0.93 1.44 1.94 2.67 2.88 3.42 3.85 4.72 21 0.54 0.71 0.95 1.48 1.99 2.73 2.95 3.50 3.94 4.84 22 0.55 0.73 0.98 1.51 2.03 2.79 3.01 3.57 4.03 4.94 23 0.56 0.74 1.00 1.54 2.07 2.85 3.07 3.65 4.12 5.05 24 0.57 0.76 1.02 1.58 2.12 2.91 3.14 3.72 4.20 5.15 25 0.58 0.77 1.04 1.61 2.16 2.97 3.20 3.80 4.28 5.25 Droplet size based on ASABE S572.1 standard. Albuz® is a registered trademark of SAINT-GOBAIN SOLCERA, SAINT GOBAIN CERAMIQUES AVANCEES DESMARQUEST, CERAMIQUES TECHNIQUES DESMARQUEST, and SOCIETE DESMARQUEST ET CEC Hypro® is a registered trademark of Pentair.. 177 BANDING AND DIRECTED SPRAY NOZZLES Hollow Cone - Ceramic ATR 80 o Hollow Cone - Ceramic TVI 80 o The Albuz® TVI drastically reduces the potential for spray drift in broadcast, directed, and air-blast applications. The air-induced hollow-cone pattern stays on target, saving chemical and reducing environmental impact. • All ceramic orifice creates extremely long life • Air-filled droplets control drift and reduce chemical waste US Units Spray Nozzle 70 TVI-80005 TVI-800075 TVI-80015 TVI-8002 TVI-80025 TVI-8003 0.066 0.099 0.198 0.265 0.331 0.397 80 0.071 0.106 0.212 0.283 0.354 0.424 100 120 0.079 0.119 0.237 0.316 0.395 0.474 0.087 0.130 0.260 0.346 0.433 0.520 140 0.094 0.140 0.281 0.374 0.468 0.561 160 0.100 0.150 0.300 0.400 0.500 0.600 Flow Rate, GPM at Pressure,PSI 180 200 220 240 0.106 0.159 0.318 0.424 0.530 0.636 0.112 0.168 0.335 0.447 0.559 0.671 0.117 0.176 0.352 0.469 0.586 0.704 Features 260 0.122 0.184 0.367 0.490 0.612 0.735 0.127 0.191 0.382 0.510 0.637 0.765 280 0.132 0.198 0.397 0.529 0.661 0.794 300 0.137 0.205 0.411 0.548 0.685 0.822 320 0.141 0.212 0.424 0.566 0.707 0.849 340 0.146 0.219 0.437 0.583 0.729 0.875 360 0.150 0.225 0.450 0.600 0.750 0.900 TVI 80º - Hollow Cone 70 PSI 150 PSI 200 PSI XC XC XC XC XC TVI-80005 TVI-800075 TVI-80015 TVI-8002 TVI-80025 C C C XC XC C C C VC VC Metric Units TVI-80005 TVI-800075 TVI-80015 TVI-8002 TVI-80025 TVI-8003 5 6 7 0.39 0.77 1.03 1.03 1.55 0.42 0.85 1.13 1.41 1.70 TVI 80º - Hollow Cone TVI-80005 TVI-800075 TVI-80015 TVI-8002 TVI-80025 0.31 0.46 0.92 1.22 1.53 1.83 8 0.33 0.49 0.98 1.31 1.63 1.96 5 Bar 10 Bar 15 Bar XC XC XC XC XC C C C XC XC C C C VC VC Plant Health Pattern Hollow Cone Technology Air Induction Material Ceramic Spray Angle 80º Pressure Range 70-360 PSI (5-25 BAR) Configuration Nozzle Part Numbers Droplet size based on ASABE S572.1 standard. Spray Nozzle Common Use 9 0.35 0.52 1.04 1.39 1.73 2.03 10 0.37 0.55 1.10 1.46 1.83 2.19 11 0.38 0.57 1.15 1.53 1.91 2.30 12 0.40 0.60 1.20 1.60 2.00 2.40 Flow Rate, LPM at Pressure, Bar 13 14 15 16 17 0.42 0.62 1.25 1.67 2.08 2.50 0.43 0.65 1.30 1.73 2.16 2.59 0.45 0.67 1.34 1.79 2.24 2.68 0.46 0.69 1.39 1.85 2.31 2.77 0.48 0.71 1.43 1.90 2.38 2.86 18 0.49 0.73 1.47 1.96 2.45 2.94 19 0.50 0.75 1.51 2.01 2.52 3.02 20 0.52 1.03 1.55 2.07 2.58 3.10 21 0.53 0.79 1.59 2.12 2.65 3.17 22 0.54 0.81 1.62 2.17 2.71 3.25 23 0.55 0.83 1.66 2.22 2.77 3.32 24 0.57 0.85 1.70 2.26 2.83 3.39 25 0.58 0.87 1.73 2.31 2.89 3.46 Nozzles 80º Caps (25 Pack) TVI-80005 CAP05-20 TVI-800075 CAP05-20 TVI-80015 CAP05-20 TVI-8002 CAP05-20 TVI-80025 CAP05-20 TVI-8003 CAP05-20 Albuz® is a registered trademark of SAINT-GOBAIN SOLCERA, SAINT GOBAIN CERAMIQUES AVANCEES DESMARQUEST, CERAMIQUES TECHNIQUES DESMARQUEST, and SOCIETE DESMARQUEST ET CEC. Hypro® is a registered trademark of Pentair.. 178 The AVI 80º air-inducing fan pattern spray nozzle is ideal for use in directed spray applications and on air-blast sprayers. Research shows AVI spray nozzles can be used to deliver more spray on target with less loss to airborne drift and to the ground than conventional applications. • Ceramic orifice for extra long life and accuracy • Venturi design delivers more spray on-target • Color coded for simple selection • 110º fan model ideal for broadcast spraying (See page 142 for more info.) US Units Spray Nozzle 01 015 02 025 03 04 40 0.100 0.150 0.200 0.250 0.300 0.400 50 0.112 0.168 0.224 0.280 0.335 0.447 60 0.122 0.184 0.245 0.306 0.367 0.490 70 0.132 0.198 0.265 0.331 0.397 0.529 Metric Units Spray Nozzle 01 015 02 025 03 04 2.1 2.8 3.4 4.1 0.329 0.492 0.655 0.821 0.984 1.310 0.379 0.568 0.757 0.946 1.136 1.514 0.424 0.636 0.848 1.060 1.268 1.692 0.462 0.697 0.927 1.158 1.389 1.855 Flow Rate, GPM at Pressure,PSI 80 90 100 120 0.141 0.212 0.283 0.354 0.424 0.566 0.150 0.225 0.300 0.375 0.450 0.600 0.158 0.237 0.316 0.395 0.474 0.632 0.173 0.260 0.346 0.433 0.520 0.693 Flow Rate, LPM at Pressure, Bar 4.8 5.5 6.9 8.3 0.500 0.750 1.003 1.253 1.503 2.002 0.534 0.803 1.071 1.340 1.605 2.143 0.598 0.897 1.196 1.495 1.794 2.392 0.655 0.984 1.310 1.639 1.968 2.623 Features 150 0.194 0.290 0.387 0.484 0.581 0.775 200 0.224 0.335 0.447 0.559 0.671 0.894 250 0.250 0.375 0.500 0.625 0.750 1.000 300 0.274 0.411 0.548 0.685 0.822 1.095 350 0.296 0.444 0.592 0.740 0.887 1.183 Common Use Plant Health Pattern Tapered Flat Fan Technology Air Induction Material Ceramic Spray Angle 80º Pressure Range 40-350 PSI (3-24 BAR) Configuration Nozzle AVI-8001 AVI-80015 AVI-8002 AVI-80025 AVI-8003 AVI-8004 CAP01-01 CAP01-015 CAP01-02 CAP01-025 CAP01-03 CAP01-04 Part Numbers Nozzles 80º Caps (25 Pack) 10.3 13.8 17.2 20.7 24.1 0.734 1.098 1.465 1.832 2.199 2.934 0.848 1.268 1.692 2.116 2.540 3.384 0.946 1.420 1.893 2.366 2.839 3.785 1.037 1.556 2.074 2.593 3.112 4.145 1.120 1.681 2.241 2.801 3.358 4.478 179 BANDING AND DIRECTED SPRAY NOZZLES Flat Fans - Ceramic AVI 80 o Flat Fan - Ceramic AXI 80 o The AXI 80º extended range fan pattern nozzle can be used for directed applications of a variety of chemistries and products. They are well suited to applications where smaller droplets are favored. They are equipped with a ceramic orifice to provide long-lasting performance. • Ceramic orifice for extra long life • Simple, reliable design • Color coded for simple selection • FastCap includes nozzle, cap and gasket • 110º fan model ideal for broadcast spraying (See page 154 for more info.) US Units Spray Nozzle 01 015 02 025 03 04 05 06 40 0.100 0.150 0.200 0.250 0.300 0.400 0.500 0.600 50 0.112 0.168 0.224 0.280 0.335 0.447 0.559 0.671 60 0.122 0.184 0.245 0.306 0.367 0.490 0.612 0.735 70 0.132 0.198 0.265 0.331 0.397 0.529 0.661 0.794 Metric Units Spray Nozzle 01 015 02 025 03 04 05 06 1.4 2.8 3.4 4.1 0.269 0.401 0.534 0.670 0.803 1.071 1.340 1.605 0.379 0.568 0.757 0.946 1.136 1.514 1.893 2.271 0.424 0.636 0.848 1.060 1.268 1.692 2.116 2.540 0.462 0.697 0.927 1.158 1.389 1.855 2.317 2.782 Flow Rate, GPM at Pressure,PSI 80 90 100 120 0.141 0.212 0.283 0.354 0.424 0.566 0.707 0.849 0.150 0.225 0.300 0.375 0.450 0.600 0.750 0.900 0.158 0.237 0.316 0.395 0.474 0.632 0.791 0.949 0.173 0.260 0.346 0.433 0.520 0.693 0.866 1.039 Flow Rate, LPM at Pressure,B ar 4.8 5.5 6.9 8.3 0.500 0.750 1.003 1.253 1.503 2.002 2.502 3.006 0.534 0.803 1.071 1.340 1.605 2.143 2.676 3.214 0.598 0.897 1.196 1.495 1.794 2.392 2.994 3.592 0.655 0.984 1.310 1.639 1.968 2.623 3.278 3.933 Features 150 0.194 0.290 0.387 0.484 0.581 0.775 0.968 1.162 200 0.224 0.335 0.447 0.559 0.671 0.894 1.118 1.342 250 0.250 0.375 0.500 0.625 0.750 1.000 1.250 1.500 300 0.274 0.411 0.548 0.685 0.822 1.095 1.369 1.643 350 0.296 0.444 0.592 0.740 0.887 1.183 1.479 1.775 10.3 13.8 17.2 20.7 24.1 0.734 1.098 1.465 1.832 2.199 2.934 3.664 4.399 0.848 1.268 1.692 2.116 2.540 3.384 4.232 5.080 0.946 1.420 1.893 2.366 2.839 3.785 4.732 5.678 1.037 1.556 2.074 2.593 3.112 4.145 5.182 6.219 1.120 1.681 2.241 2.801 3.358 4.478 5.599 6.719 180 Common Use Plant Health Pattern Tapered Flat Fan Technology Elliptical Orifice Material Ceramic Spray Angle 80º Pressure Range 40-350 PSI (3-24 BAR) Configuration Nozzle, Fast Cap Part Numbers Nozzles 80º FastCaps 80º AXI-80015 AXI-8002 AXI-8003 AXI-8004 AXI-8005 AXI-8006 FC-AXI-80015 FC-AXI-8002 FC-AXI-8003 FC-AXI-8004 FC-AXI-8005 FC-AXI-8006 o Albuz® Ceramic discs and cores are the longest lasting disc-core nozzles, making them ideal for abrasive agricultural and horticultural sprays. DCC/ CRC nozzles will outlast stainless steel disc-core nozzles by up to 10 times and perform superbly at high pressures common on many air-blast and directed sprayers. US Units DISC Full Cone CORE DCC-01 DCC-02 DCC-03 DCC-01 DCC-02 DCC-03 DCC-04 DCC-05 DCC-02 DCC-03 DCC-04 DCC-05 DCC-06 DCC-07 CRC-31 CRC-31 CRC-31 CRC-35 CRC-35 CRC-35 CRC-35 CRC-35 CRC-56 CRC-56 CRC-56 CRC-56 CRC-56 CRC-56 Metric Units DISC DCC-01 DCC-02 DCC-03 DCC-01 DCC-02 DCC-03 DCC-04 DCC-05 DCC-02 DCC-03 DCC-04 DCC-05 DCC-06 DCC-07 Full Cone CORE CRC-31 CRC-31 CRC-31 CRC-35 CRC-35 CRC-35 CRC-35 CRC-35 CRC-56 CRC-56 CRC-56 CRC-56 CRC-56 CRC-56 10 0.08 0.12 0.13 0.08 0.14 0.16 0.27 0.34 0.38 0.55 0.76 3 - 2.6 1.0 1.3 2.2 3.0 4.5 6.0 20 0.11 0.16 0.18 0.11 0.18 0.22 0.37 0.48 0.39 0.54 0.78 1.10 4 - 3.0 1.1 1.6 2.5 3.5 5.3 6.9 30 0.13 0.19 0.21 0.13 0.24 0.26 0.44 0.58 0.21 0.29 0.48 0.66 0.95 1.30 40 0.15 0.22 0.24 0.14 0.25 0.30 0.50 0.66 0.25 0.34 0.55 0.76 1.10 1.50 Flow Rate GPM at Pressure, PSI 60 80 100 0.18 0.26 0.29 0.17 0.3 0.36 0.60 0.8 0.3 0.41 0.67 0.93 1.40 1.90 Flow Rate GPM at Pressure, Bar 5 6 10 - - 3.3 1.2 1.7 2.8 3.9 5.9 7.7 3.6 1.4 1.9 3.1 4.3 6.5 8.5 1.0 1.5 1.6 1.0 1.7 2.0 3.5 4.5 1.8 2.4 4.0 5.5 8.5 11.0 0.20 0.30 0.33 0.2 0.34 0.41 0.70 0.92 0.35 0.48 0.78 1.10 1.60 2.20 0.23 0.33 0.37 0.22 0.37 0.45 0.79 1.00 0.39 0.53 0.87 1.20 1.70 2.40 15 20 1.2 1.8 1.9 1.2 2.0 2.4 4.2 5.5 2.2 3.0 4.8 6.7 10.2 13.5 1.4 2.0 2.2 1.3 2.2 2.8 4.8 6.3 2.5 3.4 5.6 7.8 11.9 15.6 150 0.27 0.40 0.44 0.26 0.45 0.55 0.93 1.20 0.47 0.65 1.10 1.50 2.10 2.90 200 0.31 0.45 0.50 0.29 0.51 0.62 1.10 1.40 5.50 7.50 1.20 1.70 2.50 3.40 300 0.37 0.55 0.6 0.35 0.60 0.74 1.30 1.70 0.67 0.92 1.50 2.10 3.00 4.20 Spray Angle Degrees Pressure, Bar 10 20 38 49 58 27 40 42 60 62 16 22 28 33 38 51 40 54 67 27 45 48 68 69 18 24 30 35 40 53 Spray Angle Degrees Pressure, PSI 20 40 80 49 62 63 19 40 45 68 67 20 26 34 45 47 63 65 23 44 50 70 69 14 20 26 32 39 52 43 61 63 26 47 52 71 71 17 23 29 34 41 54 Features Common Use Plant Health Pattern Full Cone Technology Swirl Material Ceramic Spray Angle 14º-71º Pressure Range 10-300 PSI (1-20 BAR) Configuration Nozzle Part Numbers Discs Cores Caps (25 Pack) DCC-01 CRC-31 CAP05-20 DCC-02 CRC-35 CAP05-20 DCC-03 CRC-56 CAP05-20 DCC-04 – CAP05-20 DCC-05 – CAP05-20 DCC-06 – CAP05-20 DCC-07 – CAP05-20 Albuz® is a registered trademark of SAINT-GOBAIN SOLCERA, SAINT GOBAIN CERAMIQUES AVANCEES DESMARQUEST, CERAMIQUES TECHNIQUES DESMARQUEST, and SOCIETE DESMARQUEST ET CEC. Hypro® is a registered trademark of Pentair.. 181 BANDING AND DIRECTED SPRAY NOZZLES Full Cone - Ceramic Discs & Cores 14 -71 o Full Cone Directed - FCX 80 o The FCX full-cone spray nozzle is especially suited for coverage sensitive applications of insecticide/fungicides. • Full cone pattern to give superior coverage with non-air inducted droplets • 80° spray angle makes the product easy to direct for spot applications • Broad operating range for application flexibility US Units Nozzle Pressure Flow Rate Size (PSI) (GPM) 02 03 04 05 06 15 20 30 40 50 60 70 80 100 125 150 15 20 30 40 50 60 70 80 100 125 150 15 20 30 40 50 60 70 80 100 125 150 15 20 30 40 50 60 70 80 100 125 150 15 20 30 40 50 60 70 80 100 125 150 0.20 0.23 0.28 0.33 0.37 0.40 0.43 0.46 0.52 0.58 0.63 0.30 0.35 0.42 0.49 0.55 0.60 0.65 0.69 0.77 0.87 0.95 0.40 0.46 0.57 0.65 0.73 0.80 0.86 0.92 1.03 1.15 1.26 0.50 0.58 0.71 0.82 0.91 1.00 1.08 1.15 1.29 1.44 1.58 0.60 0.69 0.85 0.98 1.10 1.20 1.30 1.39 1.55 1.73 1.90 4 14.9 17.1 20.8 24.5 27.5 29.7 31.9 34.2 38.6 43.1 46.8 22.3 26.0 31.2 36.4 40.8 44.6 48.3 51.2 57.2 64.6 70.5 29.7 34.2 42.3 48.3 54.2 59.4 63.9 68.3 76.5 85.4 93.6 37.1 43.1 52.7 60.9 67.6 74.3 80.2 85.4 95.8 107 117 44.6 51.2 63.1 72.8 81.7 89.1 96.5 103 115 128 141 5 11.9 13.7 16.6 19.6 22.0 23.8 25.5 27.3 30.9 34.5 37.4 17.8 20.8 24.9 29.1 32.7 35.6 38.6 41.0 45.7 51.7 56.4 23.8 27.3 33.9 38.6 43.4 47.5 51.1 54.6 61.2 68.3 74.8 29.7 34.5 42.2 48.7 54.1 59.4 64.2 68.3 76.6 85.5 93.9 35.6 41.0 50.5 58.2 65.3 71.3 77.2 82.6 92.1 103 113 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 9.9 11.4 13.9 16.3 18.3 19.8 21.3 22.8 25.7 28.7 31.2 14.9 17.3 20.8 24.3 27.2 29.7 32.2 34.2 38.1 43.1 47.0 19.8 22.8 28.2 32.2 36.1 39.6 42.6 45.5 51.0 56.9 62.4 24.8 28.7 35.1 40.6 45.0 49.5 53.5 56.9 63.9 71.3 78.2 29.7 34.2 42.1 48.5 54.5 59.4 64.4 68.8 76.7 85.6 94.1 7.4 8.5 10.4 12.3 13.7 14.9 16.0 17.1 19.3 21.5 23.4 11.1 13.0 15.6 18.2 20.4 22.3 24.1 25.6 28.6 32.3 35.3 14.9 17.1 21.2 24.1 27.1 29.7 31.9 34.2 38.2 42.7 46.8 18.6 21.5 26.4 30.4 33.8 37.1 40.1 42.7 47.9 53.5 58.7 22.3 25.6 31.6 36.4 40.8 44.6 48.3 51.6 57.5 64.2 70.5 5.9 6.8 8.3 9.8 11.0 11.9 12.8 13.7 15.4 17.2 18.7 8.9 10.4 12.5 14.6 16.3 17.8 19.3 20.5 22.9 25.8 28.2 11.9 13.7 16.9 19.3 21.7 23.8 25.5 27.3 30.6 34.2 37.4 14.9 17.2 21.1 24.4 27.0 29.7 32.1 34.2 38.3 42.8 46.9 17.8 20.5 25.2 29.1 32.7 35.6 38.6 41.3 46.0 51.4 56.4 5.0 5.7 6.9 8.2 9.2 9.9 10.6 11.4 12.9 14.4 15.6 7.4 8.7 10.4 12.1 13.6 14.9 16.1 17.1 19.1 21.5 23.5 9.9 11.4 14.1 16.1 18.1 19.8 21.3 22.8 25.5 28.5 31.2 12.4 14.4 17.6 20.3 22.5 24.8 26.7 28.5 31.9 35.6 39.1 14.9 17.1 21.0 24.3 27.2 29.7 32.2 34.4 38.4 42.8 47.0 GAL/1000Ft 15 4.0 4.6 5.5 6.5 7.3 7.9 8.5 9.1 10.3 11.5 12.5 5.9 6.9 8.3 9.7 10.9 11.9 12.9 13.7 15.2 17.2 18.8 7.9 9.1 11.3 12.9 14.5 15.8 17.0 18.2 20.4 22.8 24.9 9.9 11.5 14.1 16.2 18.0 19.8 21.4 22.8 25.5 28.5 31.3 11.9 13.7 16.8 19.4 21.8 23.8 25.7 27.5 30.7 34.3 37.6 182 20 3.0 3.4 4.2 4.9 5.5 5.9 6.4 6.8 7.7 8.6 9.4 4.5 5.2 6.2 7.3 8.2 8.9 9.7 10.2 11.4 12.9 14.1 5.9 6.8 8.5 9.7 10.8 11.9 12.8 13.7 15.3 17.1 18.7 7.4 8.6 10.5 12.2 13.5 14.9 16.0 17.1 19.2 21.4 23.5 8.9 10.2 12.6 14.6 16.3 17.8 19.3 20.6 23.0 25.7 28.2 2 0.68 0.78 0.95 1.13 1.26 1.36 1.47 1.57 1.77 1.98 2.15 1.02 1.19 1.43 1.67 1.88 2.05 2.22 2.35 2.63 2.97 3.24 1.36 1.57 1.94 2.22 2.49 2.73 2.93 3.14 3.51 3.92 4.30 1.71 1.98 2.42 2.80 3.10 3.41 3.68 3.92 4.40 4.91 5.39 2.05 2.35 2.90 3.34 3.75 4.09 4.43 4.74 5.29 5.90 6.48 2 20 inch nozzle spacing 3 0.45 0.52 0.64 0.75 0.84 0.91 0.98 1.05 1.18 1.32 1.43 0.68 0.80 0.95 1.11 1.25 1.36 1.48 1.57 1.75 1.98 2.16 0.91 1.05 1.30 1.48 1.66 1.82 1.96 2.09 2.34 2.61 2.86 1.14 1.32 1.61 1.86 2.07 2.27 2.46 2.61 2.93 3.27 3.59 1.36 1.57 1.93 2.23 2.50 2.73 2.96 3.16 3.52 3.93 4.32 4 0.34 0.39 0.48 0.56 0.63 0.68 0.73 0.78 0.89 0.99 1.07 0.51 0.60 0.72 0.84 0.94 1.02 1.11 1.18 1.31 1.48 1.62 0.68 0.78 0.97 1.11 1.24 1.36 1.47 1.57 1.76 1.96 2.15 0.85 0.99 1.21 1.40 1.55 1.71 1.84 1.96 2.20 2.46 2.69 1.02 1.18 1.45 1.67 1.88 2.05 2.22 2.37 2.64 2.95 3.24 5 0.27 0.31 0.38 0.45 0.50 0.55 0.59 0.63 0.71 0.79 0.86 0.41 0.48 0.57 0.67 0.75 0.82 0.89 0.94 1.05 1.19 1.30 0.55 0.63 0.78 0.89 1.00 1.09 1.17 1.25 1.40 1.57 1.72 0.68 0.79 0.97 1.12 1.24 1.36 1.47 1.57 1.76 1.96 2.16 0.82 0.94 1.16 1.34 1.50 1.64 1.77 1.90 2.11 2.36 2.59 BANDING AND DIRECTED SPRAY NOZZLES Metric Units Nozzle Size 02 03 04 05 06 Pressure (BAR) Flow Rate (LPM) 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 0,74 1,05 1,28 1,48 1,65 1,81 1,96 2,09 2,22 2,34 1,12 1,58 1,94 2,23 2,50 2,73 2,96 3,17 3,36 3,54 1,49 2,11 2,58 2,98 3,33 3,65 3,94 4,21 4,47 4,71 1,86 2,63 3,22 3,72 4,16 4,56 4,92 5,26 5,58 5,88 2,23 3,15 3,86 4,45 4,98 5,45 5,89 6,29 6,69 7,05 7 127 180 219 254 283 310 336 358 381 401 192 271 333 382 429 468 507 543 576 607 255 362 442 511 571 626 675 722 766 807 319 451 552 638 713 782 843 902 957 1008 382 540 662 763 854 934 1010 1078 1147 1209 8 111 158 192 222 248 272 294 314 333 351 168 237 291 335 375 410 444 476 504 531 224 317 387 447 500 548 591 632 671 707 279 395 483 558 624 684 738 789 837 882 335 473 579 668 747 818 884 944 1004 1058 10 89 126 154 178 198 217 235 251 266 281 134 190 233 268 300 328 355 380 403 425 179 253 310 358 400 438 473 505 536 565 223 316 386 446 499 547 590 631 670 706 268 378 463 534 598 654 707 755 803 846 Flow L/min- 50 cm Spacing KMH 12 15 74 105 128 148 165 181 196 209 222 234 112 158 194 223 250 273 296 317 336 354 149 211 258 298 333 365 394 421 447 471 186 263 322 372 416 456 492 526 558 588 223 315 386 445 498 545 589 629 669 705 59 84 102 118 132 145 157 167 178 187 90 126 155 178 200 218 237 254 269 283 119 169 206 238 266 292 315 337 358 377 149 210 258 298 333 365 394 421 446 470 178 252 309 356 398 436 471 503 535 564 183 Features 20 44 63 77 89 99 109 118 125 133 140 67 95 116 134 150 164 178 190 202 212 89 127 155 179 200 219 236 253 268 283 112 158 193 223 250 274 295 316 335 353 134 189 232 267 299 327 353 377 401 423 25 36 50 61 71 79 87 94 100 107 112 54 76 93 107 120 131 142 152 161 170 72 101 124 143 160 175 189 202 215 226 89 126 155 179 200 219 236 252 268 282 107 151 185 214 239 262 283 302 321 338 30 30 42 51 59 66 72 78 84 89 94 45 63 78 89 100 109 118 127 134 142 60 84 103 119 133 146 158 168 179 188 74 105 129 149 166 182 197 210 223 235 89 126 154 178 199 218 236 252 268 282 Common Use Plant Health Pattern Full Cone Technology Swirl Material Polyacetal Spray Angle 80º Pressure Range 15-150 PSI (1-10 BAR) Configuration Nozzle Part Numbers Nozzles 80º Caps (25 Pack) 30FCX02 CAP04-02 30FCX03 CAP04-03 30FCX04 CAP04-04 30FCX05 CAP04-05 30FCX06 CAP04-06 Even 80 o The Hypro® Even Flat Fan spray nozzle is an excellent choice for banding and directed post application. An even spray pattern should be used when banding chemicals. • Commonly used in hand-held applications • Even spray pattern provides a precise application rate where no spray overlap is desired • Large range of flow rates available to meet your application requirements US Units Pressure (PSI) Nozzle Droplet Size Size Flow Rate (GPM) Gallons per Acre 10 inch band 4 13.4 F 30 0.09 F 40 0.10 14.9 01 VF 50 0.11 16.3 VF 60 0.12 17.8 F 30 0.13 19.3 F 40 0.15 22.3 015 F 50 0.17 25.2 VF 60 0.18 26.7 M 30 0.17 25.2 F 40 0.20 29.7 02 F 50 0.22 32.7 F 60 0.24 35.6 M 30 0.26 38.6 F 40 0.30 44.6 03 F 50 0.34 50.5 F 60 0.37 54.9 M 30 0.35 52.0 M 40 0.40 59.4 04 F 50 0.45 66.8 F 60 0.49 72.8 M 30 0.43 63.9 M 40 0.50 74.3 05 M 50 0.56 83.2 F 60 0.61 90.6 C 30 0.52 77.2 C 40 0.60 89.1 06 C 50 0.67 99.5 C 60 0.73 108 VC 30 0.69 102 C 40 0.80 119 08 C 50 0.89 132 C 60 0.98 146 Droplet size based on ASABE S572.1 standard. Metric Units Nozzle Droplet Pressure Size Size (BAR) 01 015 02 03 04 05 06 08 F F F VF F F F VF M F F F M M F F M M M F M M M F C C C C VC C C C 2 2,5 3 4 2 2,5 3 4 2 2,5 3 4 2 2,5 3 4 2 2,5 3 4 2 2,5 3 4 2 2,5 3 4 2 2,5 3 4 Flow Rate (LPM) 0,33 0,37 0,40 0,46 0,49 0,55 0,60 0,69 0,65 0,73 0,80 0,92 0,98 1,10 1,20 1,39 1,31 1,46 1,60 1,85 1,63 1,83 2,00 2,31 1,96 2,19 2,40 2,77 2,61 2,92 3,20 3,70 5 10.7 11.9 13.1 14.3 15.4 17.8 20.2 21.4 20.2 23.8 26.1 28.5 30.9 35.6 40.4 44.0 41.6 47.5 53.5 58.2 51.1 59.4 66.5 72.5 61.8 71.3 79.6 86.7 82.0 95.0 106 116 MPH 6 8.9 9.9 10.9 11.9 12.9 14.9 16.8 17.8 16.8 19.8 21.8 23.8 25.7 29.7 33.7 36.6 34.7 39.6 44.6 48.5 42.6 49.5 55.4 60.4 51.5 59.4 66.3 72.3 68.3 79.2 88.1 97.0 Gallons per Acre 12 inch band 7 7.6 8.5 9.3 10.2 11.0 12.7 14.4 15.3 14.4 17.0 18.7 20.4 22.1 25.5 28.9 31.4 29.7 33.9 38.2 41.6 36.5 42.4 47.5 51.8 44.1 50.9 56.9 61.9 58.6 67.9 75.5 83.2 In-Band Application Rate (L/Ha) 25 cm 6 132 148 160 184 196 220 240 276 260 292 320 368 392 440 480 556 524 584 640 740 652 732 800 924 784 876 960 1108 1044 1168 1280 1480 (km/h) 8 10 99 111 120 138 147 165 180 207 195 219 240 276 294 330 360 417 393 438 480 555 489 549 600 693 588 657 720 831 783 876 960 1110 79 89 96 110 118 132 144 166 156 175 192 221 235 264 288 334 314 350 384 444 391 439 480 554 470 526 576 665 626 701 768 888 4 12 66 74 80 92 98 110 120 138 130 146 160 184 196 220 240 278 262 292 320 370 326 366 400 462 392 438 480 554 522 584 640 740 11.1 12.4 13.6 14.9 16.1 18.6 21.0 22.3 21.0 24.8 27.2 29.7 32.2 37.1 42.1 45.8 43.3 49.5 55.7 60.6 53.2 61.9 69.3 75.5 64.4 74.3 82.9 90.3 85.4 99.0 110 121 5 8.9 9.9 10.9 11.9 12.9 14.9 16.8 17.8 16.8 19.8 21.8 23.8 25.7 29.7 33.7 36.6 34.7 39.6 44.6 48.5 42.6 49.5 55.4 60.4 51.5 59.4 66.3 72.3 68.3 79.2 88.1 97.0 MPH 6 7.4 8.3 9.1 9.9 10.7 12.4 14.0 14.9 14.0 16.5 18.2 19.8 21.5 24.8 28.1 30.5 28.9 33.0 37.1 40.4 35.5 41.3 46.2 50.3 42.9 49.5 55.3 60.2 56.9 66.0 73.4 80.9 Gallons per Acre 15 inch band 7 6.4 7.1 7.8 8.5 9.2 10.6 12.0 12.7 12.0 14.1 15.6 17.0 18.4 21.2 24.0 26.2 24.8 28.3 31.8 34.7 30.4 35.4 39.6 43.1 36.8 42.4 47.4 51.6 48.8 56.6 62.9 69.3 In-Band Application Rate (L/Ha) 30 cm 6 110 123 133 153 163 183 200 230 217 243 267 307 327 367 400 463 437 487 533 617 543 610 667 770 653 730 800 923 870 973 1067 1233 (km/h) 8 10 83 93 100 115 123 138 150 173 163 183 200 230 245 275 300 348 328 365 400 463 408 458 500 578 490 548 600 693 653 730 800 925 66 74 80 92 98 110 120 138 130 146 160 184 196 220 240 278 262 292 320 370 326 366 400 462 392 438 480 554 522 584 640 740 Droplet size based on ASABE S572.1 standard. 184 12 55 62 67 77 82 92 100 115 108 122 133 153 163 183 200 232 218 243 267 308 272 305 333 385 327 365 400 462 435 487 533 617 4 8.9 9.9 10.9 11.9 12.9 14.9 16.8 17.8 16.8 19.8 21.8 23.8 25.7 29.7 33.7 36.6 34.7 39.6 44.6 48.5 42.6 49.5 55.4 60.4 51.5 59.4 66.3 72.3 68.3 79.2 88.1 97.0 5 7.1 7.9 8.7 9.5 10.3 11.9 13.5 14.3 13.5 15.8 17.4 19.0 20.6 23.8 26.9 29.3 27.7 31.7 35.6 38.8 34.1 39.6 44.4 48.3 41.2 47.5 53.1 57.8 54.6 63.4 70.5 77.6 MPH 6 5.9 6.6 7.3 7.9 8.6 9.9 11.2 11.9 11.2 13.2 14.5 15.8 17.2 19.8 22.4 24.4 23.1 26.4 29.7 32.3 28.4 33.0 37.0 40.3 34.3 39.6 44.2 48.2 45.5 52.8 58.7 64.7 Features 7 5.1 5.7 6.2 6.8 7.4 8.5 9.6 10.2 9.6 11.3 12.4 13.6 14.7 17.0 19.2 20.9 19.8 22.6 25.5 27.7 24.3 28.3 31.7 34.5 29.4 33.9 37.9 41.3 39.0 45.3 50.3 55.4 In-Band Application Rate (L/Ha) 40 cm 6 83 93 100 115 123 138 150 173 163 183 200 230 245 275 300 348 328 365 400 463 408 458 500 578 490 548 600 693 653 730 800 925 8 62 69 75 86 92 103 113 129 122 137 150 173 184 206 225 261 246 274 300 347 306 343 375 433 368 411 450 519 489 548 600 694 (km/h) 10 50 56 60 69 74 83 90 104 98 110 120 138 147 165 180 209 197 219 240 278 245 275 300 347 294 329 360 416 392 438 480 555 12 41 46 50 58 61 69 75 86 81 91 100 115 123 138 150 174 164 183 200 231 204 229 250 289 245 274 300 346 326 365 400 463 Common Use Weeds Pattern Even Flat Fan Technology Elliptical Orifice Material Polyacetal Spray Angle 80º Pressure Range 30-60 PSI (2-4 BAR) Configuration Nozzle E80-01 E80-015 E80-02 E80-03 E80-04 E80-05 E80-06 E80-08 CAP00-01 CAP00-015 CAP00-02 CAP00-03 CAP00-04 CAP00-05 CAP00-06 CAP00-08 Part Numbers Nozzles 80º Caps (25 Pack) The Hypro® OC flat fan off-center brass spray nozzle is an economical nozzle for spraying around obstacles or defining the edge of a spray swath. • Creates half of a broadcast pattern • Generally positioned at the end of a boom • Designed for use with overlapping broadcast patterns to provide precise width control US Units Flow Nozzle Droplet Size Pressure Rate Size (PSI) 80º (GPM) 02 03 04 06 08 12 16 M F F F M F F F M M M F C M M M C M M M C C C M C C C C 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 0.17 0.20 0.22 0.24 0.26 0.30 0.34 0.37 0.35 0.40 0.45 0.49 0.52 0.60 0.67 0.73 0.69 0.80 0.89 0.98 1.04 1.20 1.34 1.47 1.39 1.60 1.79 1.96 4 12.6 14.9 16.3 17.8 19.3 22.3 25.2 27.5 26.0 29.7 33.4 36.4 38.6 44.6 49.7 54.2 51.2 59.4 66.1 72.8 77.2 89.1 99.5 109 103 119 133 146 Gallons per Acre 20 inch nozzle spacing MPH 5 6 8 10 12 15 10.1 11.9 13.1 14.3 15.4 17.8 20.2 22.0 20.8 23.8 26.7 29.1 30.9 35.6 39.8 43.4 41.0 47.5 52.9 58.2 61.8 71.3 79.6 87.3 82.6 95.0 106 116 8.4 9.9 10.9 11.9 12.9 14.9 16.8 18.3 17.3 19.8 22.3 24.3 25.7 29.7 33.2 36.1 34.2 39.6 44.1 48.5 51.5 59.4 66.3 72.8 68.8 79.2 88.6 97.0 6.3 7.4 8.2 8.9 9.7 11.1 12.6 13.7 13.0 14.9 16.7 18.2 19.3 22.3 24.9 27.1 25.6 29.7 33.0 36.4 38.6 44.6 49.7 54.6 51.6 59.4 66.5 72.8 5.0 5.9 6.5 7.1 7.7 8.9 10.1 11.0 10.4 11.9 13.4 14.6 15.4 17.8 19.9 21.7 20.5 23.8 26.4 29.1 30.9 35.6 39.8 43.7 41.3 47.5 53.2 58.2 4.2 5.0 5.4 5.9 6.4 7.4 8.4 9.2 8.7 9.9 11.1 12.1 12.9 14.9 16.6 18.1 17.1 19.8 22.0 24.3 25.7 29.7 33.2 36.4 34.4 39.6 44.3 48.5 20 3.4 4.0 4.4 4.8 5.1 5.9 6.7 7.3 6.9 7.9 8.9 9.7 10.3 11.9 13.3 14.5 13.7 15.8 17.6 19.4 20.6 23.8 26.5 29.1 27.5 31.7 35.4 38.8 2.5 3.0 3.3 3.6 3.9 4.5 5.0 5.5 5.2 5.9 6.7 7.3 7.7 8.9 9.9 10.8 10.2 11.9 13.2 14.6 15.4 17.8 19.9 21.8 20.6 23.8 26.6 29.1 Application Rate L/Ha - 50 cm Spacing KM/H 10 12 15 20 25 30 Droplet size based on ASABE S572.1 standard. Metric Units Flow Nozzle Droplet Size Pressure Rate Size (BAR) (LPM) 80º 02 03 04 06 08 12 16 M F F F M M F F M M M F C M M M C C M M C C C M C C C C 2 2,5 3 4 2 2,5 3 4 2 2,5 3 4 2 2,5 3 4 2 2,5 3 4 2 2,5 3 4 2 2,5 3 4 0,65 0,73 0,80 0,92 0,98 1,10 1,20 1,39 1,31 1,46 1,60 1,85 1,96 2,19 2,40 2,77 2,61 2,92 3,20 3,70 3,92 4,38 4,80 5,54 5,23 5,84 6,40 7,39 7 130 146 160 184 196 220 240 278 262 292 320 370 392 438 480 554 522 584 640 740 784 876 960 1108 1046 1168 1280 1478 8 98 110 120 138 147 165 180 209 197 219 240 278 294 329 360 416 392 438 480 555 588 657 720 831 785 876 960 1109 78 88 96 110 118 132 144 167 157 175 192 222 235 263 288 332 313 350 384 444 470 526 576 665 628 701 768 887 65 73 80 92 98 110 120 139 131 146 160 185 196 219 240 277 261 292 320 370 392 438 480 554 523 584 640 739 52 58 64 74 78 88 96 111 105 117 128 148 157 175 192 222 209 234 256 296 314 350 384 443 418 467 512 591 39 44 48 55 59 66 72 83 79 88 96 111 118 131 144 166 157 175 192 222 235 263 288 332 314 350 384 443 31 35 38 44 47 53 58 67 63 70 77 89 94 105 115 133 125 140 154 178 188 210 230 266 251 280 307 355 Droplet size based on ASABE S572.1 standard. 185 26 29 32 37 39 44 48 56 52 58 64 74 78 88 96 111 104 117 128 148 157 175 192 222 209 234 256 296 GAL/1000Ft 2 20 inch nozzle spacing 2 3 4 5 0.58 0.68 0.75 0.82 0.89 1.02 1.16 1.26 1.19 1.36 1.53 1.67 1.77 2.05 2.28 2.49 2.35 2.73 3.03 3.34 3.55 4.09 4.57 5.01 4.74 5.46 6.10 6.68 0.39 0.45 0.50 0.55 0.59 0.68 0.77 0.84 0.80 0.91 1.02 1.11 1.18 1.36 1.52 1.66 1.57 1.82 2.02 2.23 2.36 2.73 3.05 3.34 3.16 3.64 4.07 4.46 0.29 0.34 0.38 0.41 0.44 0.51 0.58 0.63 0.60 0.68 0.77 0.84 0.89 1.02 1.14 1.24 1.18 1.36 1.52 1.67 1.77 2.05 2.28 2.51 2.37 2.73 3.05 3.34 0.23 0.27 0.30 0.33 0.35 0.41 0.46 0.50 0.48 0.55 0.61 0.67 0.71 0.82 0.91 1.00 0.94 1.09 1.21 1.34 1.42 1.64 1.83 2.01 1.90 2.18 2.44 2.67 Features Common Use Unspecialized Pattern Off-Center Fan Technology Elliptical Orifice Material Brass Spray Angle 80º Pressure Range 30-60 PSI (2-4 BAR) Configuration Nozzle Part Numbers Nozzles 80º Caps (25 Pack) 28OC02 28OC03 28OC04 28OC06 28OC08 28OC12 28OC16 CAP00-20 CAP00-20 CAP00-20 CAP00-20 CAP00-20 CAP00-20 CAP00-20 BANDING AND DIRECTED SPRAY NOZZLES Brass Off-Center OC 80 o Ceramic Off-Center OCI 80 o The Albuz® OCI off-center flat fan ceramic spray nozzle provides excellent wear life for spraying around obstacles or defining the edge of a spraying swath. US Units Nozzle Droplet Pressure Flow Rate Size Size (PSI) 80º (GPM) 02 03 04 M M M F M M M M M M M M 30 40 50 60 30 40 50 60 30 40 50 60 0.17 0.20 0.22 0.24 0.26 0.30 0.34 0.37 0.35 0.40 0.45 0.49 4 12.6 14.9 16.3 17.8 19.3 22.3 25.2 27.5 26.0 29.7 33.4 36.4 5 10.1 11.9 13.1 14.3 15.4 17.8 20.2 22.0 20.8 23.8 26.7 29.1 Gallons per Acre 20 inch nozzle spacing MPH 6 8.4 9.9 10.9 11.9 12.9 14.9 16.8 18.3 17.3 19.8 22.3 24.3 8 10 6.3 7.4 8.2 8.9 9.7 11.1 12.6 13.7 13.0 14.9 16.7 18.2 Pressure Flow Nozzle Droplet Rate (Bar) (LPM) Size Size 80º 02 03 04 M M F M M M M M M 2 3 4 2 3 4 2 3 4 0.65 0.80 0.91 0.98 1.20 1.39 1.31 1.60 1.85 4 195 240 273 294 360 417 393 480 555 5 156 192 218 235 288 334 314 384 444 6 130 160 182 196 240 278 262 320 370 7 111 137 156 168 206 238 225 274 317 12 5.0 5.9 6.5 7.1 7.7 8.9 10.1 11.0 10.4 11.9 13.4 14.6 Metric Units 8 98 120 137 147 180 209 197 240 278 GAL/1000Ft 2 15 4.2 5.0 5.4 5.9 6.4 7.4 8.4 9.2 8.7 9.9 11.1 12.1 87 107 121 131 160 185 175 213 247 20 3.4 4.0 4.4 4.8 5.1 5.9 6.7 7.3 6.9 7.9 8.9 9.7 Liters/Hectare km/h 9 Features 20 inch nozzle spacing 10 78v 96 109 118 144 167 157 192 222 2 2.5 3.0 3.3 3.6 3.9 4.5 5.0 5.5 5.2 5.9 6.7 7.3 12 65 80 91 98 120 139 131 160 185 0.58 0.68 0.75 0.82 0.89 1.02 1.16 1.26 1.19 1.36 1.53 1.67 14 56 69 78 84 103 119 112 137 159 3 0.39 0.45 0.50 0.55 0.59 0.68 0.77 0.84 0.80 0.91 1.02 1.11 16 49 60 68 74 90 104 98 120 139 4 0.29 0.34 0.38 0.41 0.44 0.51 0.58 0.63 0.60 0.68 0.77 0.84 18 43 53 61 65 80 93 87 107 123 5 0.23 0.27 0.30 0.33 0.35 0.41 0.46 0.50 0.48 0.55 0.61 0.67 20 39 48 55 59 72 83 79 96 111 Common Use Unspecialized Pattern Off-Centered Fan Technology Elliptical Orifice Material Ceramic Spray Angle 80º Pressure Range 30-60 PSI (2-4 BAR) Configuration Nozzle Part Numbers Nozzles 80º Caps (25 Pack) OCI-8002 CAP00-02 OCI-8003 CAP00-03 OCI-8004 CAP00-04 Albuz® is a registered trademark of SAINT-GOBAIN SOLCERA, SAINT GOBAIN CERAMIQUES AVANCEES DESMARQUEST, CERAMIQUES TECHNIQUES DESMARQUEST, and SOCIETE DESMARQUEST ET CEC. 186 The Albuz® AVI-OC air-inducing Venturi off-center ceramic spray nozzle with air suction provides large, air-filled droplets that burst on impact with target. US Units Nozzle Droplet Pressure Flow Rate Size Size (PSI) 80º (GPM) 015 02 025 03 04 VC VC VC VC VC C C XC VC VC VC VC VC VC XC XC VC VC VC VC VC XC XC XC VC VC VC VC XC XC XC XC VC VC VC 40 50 60 70 80 90 100 40 50 60 70 80 90 100 40 50 60 70 80 90 100 40 50 60 70 80 90 100 40 50 60 70 80 90 100 0.15 0.17 0.18 0.20 0.21 0.23 0.24 0.20 0.22 0.24 0.26 0.28 0.30 0.32 0.25 0.28 0.31 0.33 0.35 0.38 0.40 0.30 0.34 0.37 0.40 0.42 0.45 0.47 0.40 0.45 0.49 0.53 0.57 0.60 0.63 4 11.1 12.6 13.4 14.9 15.6 17.1 17.8 14.9 16.3 17.8 19.3 20.8 22.3 23.8 18.6 20.8 23.0 24.5 26.0 28.2 29.7 22.3 25.2 27.5 29.7 31.2 33.4 34.9 29.7 33.4 36.4 39.4 42.3 44.6 46.8 5 8.9 10.1 10.7 11.9 12.5 13.7 14.3 11.9 13.1 14.3 15.4 16.6 17.8 19.0 14.9 16.6 18.4 19.6 20.8 22.6 23.8 17.8 20.2 22.0 23.8 24.9 26.7 27.9 23.8 26.7 29.1 31.5 33.9 35.6 37.4 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 7.4 8.4 8.9 9.9 10.4 11.4 11.9 9.9 10.9 11.9 12.9 13.9 14.9 15.8 12.4 13.9 15.3 16.3 17.3 18.8 19.8 14.9 16.8 18.3 19.8 20.8 22.3 23.3 19.8 22.3 24.3 26.2 28.2 29.7 31.2 5.6 6.3 6.7 7.4 7.8 8.5 8.9 7.4 8.2 8.9 9.7 10.4 11.1 11.9 9.3 10.4 11.5 12.3 13.0 14.1 14.9 11.1 12.6 13.7 14.9 15.6 16.7 17.4 14.9 16.7 18.2 19.7 21.2 22.3 23.4 Metric Units Nozzle Droplet Pressure Flow Rate Size Size (Bar) (LPM) 80º 015 02 025 03 04 VC VC VC XC VC VC XC VC VC XC XC VC XC XC XC 3 4 5 3 4 5 3 4 5 3 4 5 3 4 5 0.15 0.05 0.05 0.20 0.06 0.07 0.25 0.08 0.09 0.30 0.09 0.11 0.40 0.13 0.14 4 180 207 231 240 273 309 300 345 387 360 417 465 480 555 621 5 144 166 185 192 218 247 240 276 310 288 334 372 384 444 497 6 120 138 154 160 182 206 200 230 258 240 278 310 320 370 414 7 103 118 132 137 156 177 171 197 221 206 238 266 274 317 355 4.5 5.0 5.3 5.9 6.2 6.8 7.1 5.9 6.5 7.1 7.7 8.3 8.9 9.5 7.4 8.3 9.2 9.8 10.4 11.3 11.9 8.9 10.1 11.0 11.9 12.5 13.4 14.0 11.9 13.4 14.6 15.7 16.9 17.8 18.7 3.7 4.2 4.5 5.0 5.2 5.7 5.9 5.0 5.4 5.9 6.4 6.9 7.4 7.9 6.2 6.9 7.7 8.2 8.7 9.4 9.9 7.4 8.4 9.2 9.9 10.4 11.1 11.6 9.9 11.1 12.1 13.1 14.1 14.9 15.6 GAL/1000Ft 15 20 3.0 3.4 3.6 4.0 4.2 4.6 4.8 4.0 4.4 4.8 5.1 5.5 5.9 6.3 5.0 5.5 6.1 6.5 6.9 7.5 7.9 5.9 6.7 7.3 7.9 8.3 8.9 9.3 7.9 8.9 9.7 10.5 11.3 11.9 12.5 2.2 2.5 2.7 3.0 3.1 3.4 3.6 3.0 3.3 3.6 3.9 4.2 4.5 4.8 3.7 4.2 4.6 4.9 5.2 5.6 5.9 4.5 5.0 5.5 5.9 6.2 6.7 7.0 5.9 6.7 7.3 7.9 8.5 8.9 9.4 Liters/Hectare 50cm Spacing km/h 8 9 10 12 90 104 116 120 137 155 150 173 194 180 209 233 240 278 311 80 92 103 107 121 137 133 153 172 160 185 207 213 247 276 72 83 92 96 109 124 120 138 155 144 167 186 192 222 248 2 60 69 77 80 91 103 100 115 129 120 139 155 160 185 207 0.51 0.58 0.61 0.68 0.72 0.78 0.82 0.68 0.75 0.82 0.89 0.95 1.02 1.09 0.85 0.95 1.06 1.13 1.19 1.30 1.36 1.02 1.16 1.26 1.36 1.43 1.53 1.60 1.36 1.53 1.67 1.81 1.94 2.05 2.15 14 51 59 66 69 78 88 86 99 111 103 119 133 137 159 177 2 20 inch nozzle spacing 3 0.34 0.39 0.41 0.45 0.48 0.52 0.55 0.45 0.50 0.55 0.59 0.64 0.68 0.73 0.57 0.64 0.70 0.75 0.80 0.86 0.91 0.68 0.77 0.84 0.91 0.95 1.02 1.07 0.91 1.02 1.11 1.20 1.30 1.36 1.43 16 45 52 58 60 68 77 75 86 97 90 104 116 120 139 155 4 0.26 0.29 0.31 0.34 0.36 0.39 0.41 0.34 0.38 0.41 0.44 0.48 0.51 0.55 0.43 0.48 0.53 0.56 0.60 0.65 0.68 0.51 0.58 0.63 0.68 0.72 0.77 0.80 0.68 0.77 0.84 0.90 0.97 1.02 1.07 18 40 46 51 53 61 9 67 77 86 80 93 103 107 123 138 Features 5 0.20 0.23 0.25 0.27 0.29 0.31 0.33 0.27 0.30 0.33 0.35 0.38 0.41 0.44 0.34 0.38 0.42 0.45 0.48 0.52 0.55 0.41 0.46 0.50 0.55 0.57 0.61 0.64 0.55 0.61 0.67 0.72 0.78 0.82 0.86 Common Use Weeds Pattern Off-Center Fan Technology Air Induction Material Ceramic Spray Angle 80º Pressure Range 40-100 PSI (3-7 BAR) Configuration Nozzle AVI-OC-80015 CAP01-015 Part Numbers Nozzles 80º Caps (25 Pack) AVI-OC-8002 CAP01-02 AVI-OC-80025 CAP01-025 AVI-OC-8003 CAP01-03 AVI-OC-8004 CAP01-04 20 36 41 46 48 55 62 60 69 77 92 83 93 96 111 124 Albuz® is a registered trademark of SAINT-GOBAIN SOLCERA, SAINT GOBAIN CERAMIQUES AVANCEES DESMARQUEST, CERAMIQUES TECHNIQUES DESMARQUEST, and SOCIETE DESMARQUEST ET CEC. Hypro® is a registered trademark of Pentair.. 187 CENTRIFUGAL PUMPS BANDING AND DIRECTED SPRAY NOZZLES Flat Fan - Ceramic AVI-OC 80o Boomless Flat Fan Nozzles - XT-Boom X Tender The XT introduces boomless spray technology, enabling spray to be targeted into places that conventional booms and other nozzles cannot reach. XT delivers a uniform spray pattern over a distance of up to 16 feet (4.9 m). Ideal for weed control in forests and pastureland. • Ideal for applications where a conventional boom cannot be used due to obstacles • Common uses include orchard, vineyard, forestry, pasture, turf and golf course spraying, as well as maintaining rights-of-way and fence rows • Excellent low-drift option while extending spray reach • Large droplet size reduces spray drift and promotes spray penetration • Maintains a consistent spray swath over a pressure range of 30-60 psi (2-5 bar) • Standard models with precision-molded polyacetal nozzle and threaded stainless steel body provide excellent durability and low maintenance US Units Nozzle Pressure Flow Size Rate (MNPT) (PSI) (GPM) 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 30 40 50 60 10 (1/4") 15 (1/4") 20 (1/4") 24 (1/4") 43 (3/8") 80 (1/2") 167 (3/4") 215 (3/4") 0.9 1.0 1.1 1.2 1.3 1.5 1.7 1.8 1.7 2.0 2.2 2.4 2.1 2.4 2.7 2.9 3.7 4.3 4.8 5.3 6.9 8.0 8.9 9.8 14.5 16.7 18.7 20.5 18.6 21.5 24.0 26.3 4 5 8.9 9.9 10.9 11.9 10.9 12.5 13.7 15.0 13.6 16.0 17.6 19.2 16.2 18.6 20.9 22.4 31.6 36.7 41.0 45.2 68.3 79.2 88.1 97.0 128 148 165 181 144 166 186 203 7.1 7.9 8.7 9.5 8.7 10.0 11.0 12.0 10.9 12.8 14.1 15.3 13.0 14.9 16.7 17.9 25.3 29.4 32.8 36.2 54.6 63.4 70.5 77.6 103 118 132 145 115 133 149 163 Gallons per Acre at swath shown MPH 6 8 10 12 5.9 6.6 7.3 7.9 7.3 8.3 9.2 10.0 9.0 10.6 11.7 12.8 10.8 12.4 13.9 15.0 21.1 24.5 27.3 30.2 45.5 52.8 58.7 64.7 85.4 98.4 110 121 95.9 111 124 136 4.5 5.0 5.4 5.9 5.4 6.3 6.9 7.5 6.8 8.0 8.8 9.6 8.1 9.3 10.4 11.2 15.8 18.3 20.5 22.6 34.2 39.6 44.1 48.5 64.1 73.8 82.6 90.6 71.9 83.1 92.8 102 3.6 4.0 4.4 4.8 4.4 5.0 5.5 6.0 5.4 6.4 7.0 7.7 6.5 7.4 8.4 9.0 12.6 14.7 16.4 18.1 27.3 31.7 35.2 38.8 51.3 59.0 66.1 72.5 57.5 66.5 74.3 81.4 Typical Spray Pattern Produced by XT Series 3.0 3.3 3.6 4.0 3.6 4.2 4.6 5.0 4.5 5.3 5.9 6.4 5.4 6.2 7.0 7.5 10.5 12.2 13.7 15.1 22.8 26.4 29.4 32.3 42.7 49.2 55.1 60.4 48.0 55.4 61.9 67.8 GAL/1000Ft 15 2.4 2.6 2.9 3.2 2.9 3.4 3.7 4.0 3.6 4.3 4.7 5.1 4.3 5.0 5.6 6.0 8.4 9.8 10.9 12.1 18.2 21.1 23.5 25.9 34.2 39.4 44.1 48.3 38.4 44.3 49.5 54.2 20 1.8 2.0 2.2 2.4 2.2 2.5 2.8 3.0 2.7 3.2 3.5 3.8 3.2 3.7 4.2 4.5 6.3 7.3 8.2 9.0 13.7 15.8 17.6 19.4 25.6 29.5 33.1 36.2 28.8 33.3 37.1 40.7 2 0.41 0.45 0.50 0.55 0.53 0.61 0.67 0.73 0.62 0.73 0.81 0.88 0.75 0.85 0.96 1.03 1.45 1.68 1.88 2.08 3.14 3.64 4.04 4.45 5.88 6.78 7.59 8.32 6.60 7.63 8.52 9.34 3 0.27 0.30 0.33 0.36 0.35 0.41 0.45 0.49 0.42 0.49 0.54 0.59 0.50 0.57 0.64 0.69 0.97 1.12 1.25 1.38 2.09 2.42 2.70 2.97 3.92 4.52 5.06 5.54 4.40 5.09 5.68 6.22 2 4 0.20 0.23 0.25 0.27 0.26 0.30 0.33 0.37 0.31 0.37 0.40 0.44 0.37 0.43 0.48 0.51 0.72 0.84 0.94 1.04 1.57 1.82 2.02 2.23 2.94 3.39 3.79 4.16 3.30 3.82 4.26 4.67 5 0.16 0.18 0.20 0.22 0.21 0.24 0.27 0.29 0.25 0.29 0.32 0.35 0.30 0.34 0.38 0.41 0.58 0.67 0.75 0.83 1.25 1.45 1.62 1.78 2.35 2.71 3.03 3.33 2.64 3.05 3.41 3.73 Swath (Ft) at 40 PSI 48 in high 13 14 15 16 14 13 15 16 Common Uses of the Boom X Tender Spray Nozzles Boom X Tender Spraying (last nozzle on the boom) Adjustable Swath Width Swath width can be increased or decreased by adjusting the angle of the nozzle +/- 18˚. Boomless Spraying +/- 18˚ 95˚ 15˚ Boomless Spraying with Center Nozzle 188 SPECIALTY SPRAY NOZZLES Boom X Tender nozzles are ideal for boomless spraying or as the last nozzle on a boom. Hypro’s Boom X Tender nozzles provide excellent coverage throughout the swath width for superior results. Gasket, insert and o-ring kits available to rebuild MNPT versions. Metric Units Nozzle Pressure Flow Rate Size (LPM) (MNPT) (BAR) 10 (1/4 inch) 15 (1/4 inch) 20 (1/4 inch) 24 (1/4 inch) 43 (3/8 inch) 80 (1/2 inch) 167 (3/4 inch) 215 (3/4 inch) 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 3.2 3.9 4.6 4.6 5.7 6.6 6.4 7.9 9.1 7.7 9.5 10.9 13.9 17 19.6 25.8 31.6 36.5 53.8 65.9 76.1 69.3 84.9 98 Application Rate L/Ha - at swath shown KM/H Features Swath Width 4 5 6 7 8 10 12 14 16 18 20 124 152 175 162 198 229 201 247 285 237 290 335 473 579 668 992 1215 1403 1878 2300 2656 2122 2598 3000 99 121 140 129 159 183 161 197 228 189 232 268 378 463 535 793 972 1122 1502 1840 2125 1697 2079 2400 83 101 117 108 132 153 134 165 190 158 193 223 315 386 446 661 810 935 1252 1533 1771 1414 1732 2000 71 87 100 92 113 131 115 141 163 135 166 191 270 331 382 567 694 802 1073 1314 1518 1212 1485 1715 62 76 88 81 99 114 101 123 142 118 145 167 236 289 334 496 607 701 939 1150 1328 1061 1299 1500 50 61 70 65 79 92 81 99 114 95 116 134 189 232 267 397 486 561 751 920 1062 849 1039 1200 41 51 58 54 66 76 67 82 95 79 97 112 158 193 223 331 405 468 626 767 885 707 866 1000 35 43 50 46 57 65 58 71 81 68 83 96 135 165 191 283 347 401 537 657 759 606 742 857 31 38 44 40 50 57 50 62 71 59 73 84 118 145 167 248 304 351 469 575 664 530 650 750 28 34 39 36 44 51 45 55 63 53 64 74 105 129 149 220 270 312 417 511 590 471 577 667 25 30 35 32 40 46 40 49 57 47 58 67 95 116 134 198 243 281 376 460 531 424 520 600 (M) @ 2.76 BAR 1.22 meters high 3.9 4.3 4.8 Common Use Weeds Pattern Boomless Fan Technology Pre-Orifice Material Stainless or Polyacetal Spray Angle 105º Pressure Range 30-60 PSI (2-5 BAR) Configuration MNPT & FastCap Part Numbers 4.9 4.4 FastCaps MNPT (Thread) Parts Kits for MNPT version 3.9 FC-XT010 XT010 (1/4") XT010-GIOKIT FC-XT015 - - FC-XT020 XT020 (1/4") XT020-GIOKIT FC-XT024 XT024 (1/4") XT024-GIOKIT FC-XT043 XT043 (3/8") XT043-GIOKIT - XT080 (1/2") XT080-GIOKIT - XT167 (3/4") XT167-GIOKIT XT215 (3/4") XT215-GIOKIT 4.3 4.9 Swath widths and application rates in charts are based on height of 48 inches (1.2 metres), a different height will give different swath widths - Replacement FastCap Seal GPM = GPA x MPH x swath width (in) 5,940 LPM = L/ha x Kmph x swath width (m) 600 GPM = L/ha = 22W11MF64 GPA x 5,940 MPH x swath width (in) LPM x 600 Kmph x swath width (m) 189 Model Description 9950-0033 Boom X Tender Tee/ Swivel Kit for use with 1/4" NPT or Fastcap XT Nozzles Acid-Resistant Lo-Drift 110 o The Lo-Drift’s two-part construction includes a pre-orifice, which reduces the number of drift prone droplets and makes it ideal for broadcast application of acidic defoliants. • Acid-resistant material construction • Significantly reduces spray drift, widening the operational window • Balanced droplet size for effective, on-target spray US Units Nozzle Droplet Pressure Flow Rate Size Size (PSI) (GPM) 4 5 13.4 C 15 0.18 C 20 0.21 15.6 C 30 0.26 19.3 M 40 0.30 22.3 03 M 50 0.34 25.2 M 60 0.37 27.5 M 70 0.40 29.7 C 15 0.24 17.8 C 20 0.28 20.8 C 30 0.35 26.0 M 40 0.40 29.7 04 M 50 0.45 33.4 M 60 0.49 36.4 M 70 0.53 39.4 C 15 0.31 23.0 C 20 0.35 26.0 C 30 0.43 31.9 C 40 0.50 37.1 05 M 50 0.56 41.6 M 60 0.61 45.3 M 70 0.66 49.0 VC 15 0.37 27.5 C 20 0.42 31.2 C 30 0.52 38.6 C 40 0.60 44.6 06 C 50 0.67 49.7 C 60 0.73 54.2 C 70 0.79 58.7 Droplet size based on ASABE S572.1 standard. 10.7 12.5 15.4 17.8 20.2 22.0 23.8 14.3 16.6 20.8 23.8 26.7 29.1 31.5 18.4 20.8 25.5 29.7 33.3 36.2 39.2 22.0 24.9 30.9 35.6 39.8 43.4 46.9 Gallons per Acre 20 inch nozzle spacing MPH 6 8 10 12 15 8.9 10.4 12.9 14.9 16.8 18.3 19.8 11.9 13.9 17.3 19.8 22.3 24.3 26.2 15.3 17.3 21.3 24.8 27.7 30.2 32.7 18.3 20.8 25.7 29.7 33.2 36.1 39.1 Metric Units Nozzle Droplet Pressure Flow Rate (BAR) (LPM) Size Size 03 04 05 06 C C C M M M C C C M M M C C C C M M VC C C C C C 1 1,5 2 3 4 5 1 1,5 2 3 4 5 1 1,5 2 3 4 5 1 1,5 2 3 4 5 0,69 0,85 0,98 1,20 1,39 1,55 0,92 1,13 1,31 1,60 1,85 2,07 1,15 1,41 1,63 2,00 2,31 2,58 1,39 1,70 1,96 2,40 2,77 3,10 7 118 146 168 206 238 266 158 194 225 274 317 355 197 242 279 343 396 442 238 291 336 411 475 531 8 104 128 147 180 209 233 138 170 197 240 278 311 173 212 245 300 347 387 209 255 294 360 416 465 6.7 7.8 9.7 11.1 12.6 13.7 14.9 8.9 10.4 13.0 14.9 16.7 18.2 19.7 11.5 13.0 16.0 18.6 20.8 22.6 24.5 13.7 15.6 19.3 22.3 24.9 27.1 29.3 5.3 6.2 7.7 8.9 10.1 11.0 11.9 7.1 8.3 10.4 11.9 13.4 14.6 15.7 9.2 10.4 12.8 14.9 16.6 18.1 19.6 11.0 12.5 15.4 17.8 19.9 21.7 23.5 4.5 5.2 6.4 7.4 8.4 9.2 9.9 5.9 6.9 8.7 9.9 11.1 12.1 13.1 7.7 8.7 10.6 12.4 13.9 15.1 16.3 9.2 10.4 12.9 14.9 16.6 18.1 19.6 GAL/1000Ft 20 3.6 4.2 5.1 5.9 6.7 7.3 7.9 4.8 5.5 6.9 7.9 8.9 9.7 10.5 6.1 6.9 8.5 9.9 11.1 12.1 13.1 7.3 8.3 10.3 11.9 13.3 14.5 15.6 2.7 3.1 3.9 4.5 5.0 5.5 5.9 3.6 4.2 5.2 5.9 6.7 7.3 7.9 4.6 5.2 6.4 7.4 8.3 9.1 9.8 5.5 6.2 7.7 8.9 9.9 10.8 11.7 4 0.61 0.72 0.89 1.02 1.16 1.26 1.36 0.82 0.95 1.19 1.36 1.53 1.67 1.81 1.06 1.19 1.47 1.71 1.91 2.08 2.25 1.26 1.43 1.77 2.05 2.28 2.49 2.69 Application Rate L/Ha - 50 cm Spacing KMH 10 12 15 20 83 102 118 144 167 186 110 136 157 192 222 248 138 169 196 240 277 310 167 204 235 288 332 372 69 85 98 120 139 155 92 113 131 160 185 207 115 141 163 200 231 258 139 170 196 240 277 310 55 68 78 96 111 124 74 90 105 128 148 166 92 113 130 160 185 206 111 136 157 192 222 248 Droplet size based on ASABE S572.1 standard. 190 41 51 59 72 83 93 55 68 79 96 111 124 69 85 98 120 139 155 83 102 118 144 166 186 2 20 inch nozzle spacing 5 6 0.41 0.48 0.59 0.68 0.77 0.84 0.91 0.55 0.64 0.80 0.91 1.02 1.11 1.20 0.70 0.80 0.98 1.14 1.27 1.39 1.50 0.84 0.95 1.18 1.36 1.52 1.66 1.80 0.31 0.36 0.44 0.51 0.58 0.63 0.68 0.41 0.48 0.60 0.68 0.77 0.84 0.90 0.53 0.60 0.73 0.85 0.95 1.04 1.13 0.63 0.72 0.89 1.02 1.14 1.24 1.35 25 33 41 47 58 67 74 44 54 63 77 89 99 55 68 78 96 111 124 67 82 94 115 133 149 Features 7 0.25 0.29 0.35 0.41 0.46 0.50 0.55 0.33 0.38 0.48 0.55 0.61 0.67 0.72 0.42 0.48 0.59 0.68 0.76 0.83 0.90 0.50 0.57 0.71 0.82 0.91 1.00 1.08 30 28 34 39 48 56 62 37 45 52 64 74 83 46 56 65 80 92 103 56 68 78 96 111 124 Common Use Acid Defoliants Pattern Tapered Flat Fan Technology Pre-Orifice Material PVDF Spray Angle 110º Pressure Range 15-70 PSI (1-5 BAR) Configuration Nozzles Part Numbers Nozzles 110º 90LD03F110 90LD04F110 90LD05F110 90LD06F110 High Impact Car Wash Nozzle TER A W % 25 S! SAVING 5X’S ! FE THE LI • Provides a high impact, controlled rotation 0° water stream with much greater impact and cleaning efficiency than other nozzles which reduces wash time & increases thru-put • Lasts up to five times longer than other rotating nozzles on the market, reducing operating costs over the life of the car wash • Improved cleaning efficiency over other rotating nozzles reduces water consumption by up to 25% • Tungsten carbide seat and nozzle provide unmatched wear and shatter resistance over ceramic material commonly utilized in other nozzles • High strength, forged housing available in economical brass or corrosion-resistant 304 stainless steel • Elastomer cover protects vehicles and nozzles • Precision-machined bearing in rotor offers very high wear resistance and optimal impact • Available with 24° pattern for maximum impact or 30° pattern for extra coverage • BSP-style connection available in 24° brass (sizes 2.0, 3.5, 4.5) for use in Mark VII® washes Sample Part Number: TUR324B-2.0 Breakdown: TUR 324 B series material brass - 2.0 size 2.0 Nozzle Specifications Material Angle Temperature 1750 PSI (120 bar) Ideal Impact Distance 20”-30” (51-76cm) Brass 24° 180° F (82º C) TUR324B-x.x-BSP 1750 PSI (120 bar) 20"-30" (51-76cm) Brass 24º 180º F (82º C) TUR324S-x.x 3000 PSI (207 bar) 20”-30” (51-76cm) Stainless 24° 180° F (82º C) TUR330B-x.x 1300 PSI (90 bar) 15”-25” (38-63cm) Brass 30° 180° F (82º C) TUR330S-x.x 3000 PSI (207 bar) 15”-25” (38-63cm) Stainless 30° 180° F (82º C) Series Pressure* TUR324B-x.x *See rate chart below for specific information 1/4” FNPT or 1/4" BSP Dimensional Chart Series A (in) A (mm) B (in) B (mm) 324 3.05 77.5 1.49 37.8 330 2.96 75.6 1.69 42.9 A B Spray Nozzle Size 2.0 3.0 3.5 4.0 4.5 5.0 5.5 6.0 800 Flow Rate (US GPM) Pressure (PSI) 900 1000 1100 1200 1500 2000 2250 2500 2750 3000 70 Flow Rate (L/min) Pressure (BAR) 80 90 100 120 140 50 60 0.89 0.95 1.00 1.05 1.10 1.22 1.41 1.50 1.58 1.66 1.73 3.21 3.51 160 180 200 3.80 4.06 4.30 4.54 4.97 5.37 5.74 6.09 6.42 1.34 1.42 1.50 1.57 1.64 1.84 2.12 2.25 2.37 2.49 2.60 4.83 1.57 1.66 1.75 1.84 1.92 2.14 2.47 2.63 2.77 2.90 3.03 5.66 5.29 5.71 6.11 6.48 6.83 7.48 8.08 8.64 9.16 9.66 6.20 6.70 7.16 7.59 8.00 8.77 9.47 10.10 10.70 11.30 1.79 1.90 2.00 2.10 2.19 2.45 2.83 3.00 3.16 3.32 3.46 2.01 2.13 2.25 2.36 2.46 2.76 3.18 3.38 3.56 3.73 3.90 6.45 7.07 7.63 8.16 8.66 9.12 9.99 10.80 11.50 12.20 12.90 7.24 7.94 8.57 9.16 9.72 10.20 11.20 12.10 12.90 13.70 14.40 2.24 2.37 2.50 2.62 2.74 3.06 3.54 3.75 3.95 4.15 2.46 2.61 2.75 2.88 3.01 3.37 3.89 4.13 4.35 4.56 4.33 8.07 8.84 9.55 10.20 10.80 11.40 12.50 13.50 14.40 15.30 16.10 4.76 8.87 9.71 10.40 11.20 11.80 12.50 13.70 14.80 15.80 16.80 17.70 2.68 2.85 3.00 3.15 3.29 3.67 4.24 4.50 4.74 4.97 5.20 9.66 10.50 11.40 12.20 12.90 13.60 14.90 16.10 17.20 18.30 19.30 Sample Part Number TUR Model 3 Size 3 Turbo (BSP) for Mark VII® Washes* 3 Turbo (NPT) 24 Angle 24° or 30° B Material “B” Brass or “S” Stainless – Dash – 2.0, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0 24° “B” Brass – 2.0, 3.5, 4.5 Note: BSP Models: Add suffix “BSP” -example TUR324B-2.0BSP 191 2.0 Nozzle Number SPECIALTY SPRAY NOZZLES Sudden Impact UAS - Ceramic Nozzle High Impact Car Wash Nozzle LIFE E H T S 10X’ VER O ESS! L N I A T S • Ceramic inserts provide up to 10 times the life of hardened stainless steel, maximizing your return on investment and decreasing downtime for nozzle replacement • Extra long-life ceramic orifice is nearly diamond-hard to resist wear • Molded ceramic virtually eliminates chemical and mineral buildup in the orifice area • Wear characteristics make the UAS nozzle ideal for reclaim systems • The U-shaped outlet provides a high-impact spray without additional inserts • Wedge-shaped orifice insert seats tightly as spray pressures increase • Precision-machined stainless steel carriers resist corrosion and damage • High quality components easily withstand wash pressures of 800 to 5000 psi (55-345 BAR) • 1/4” NPT connection fits all common applications • Permanent laser-etched part number markings ease identification • Comes in spray angles of 0°, 15°, 25°, 40° Sample Part Number: UAS1/4-25-04 Breakdown: UAS 1/4 model UAS connection 1/4” NPT 25 spray angle 25º - 04 size 04 Flow Rate (US GPM) Spray Nozzle Size 800 900 1000 1200 1500 1800 2000 2500 3000 3500 4000 4500 5000 015 0.67 0.71 0.75 0.82 0.92 1.01 1.06 1.19 1.30 1.40 1.50 1.59 1.68 Pressure (PSI) 02 0.89 0.95 1.00 1.10 1.22 1.34 1.41 1.58 1.73 1.87 2.00 2.12 2.24 025 1.12 1.19 1.25 1.37 1.53 1.68 1.77 1.98 2.17 2.34 2.50 2.65 2.80 03 1.34 1.42 1.50 1.64 1.84 2.01 2.12 2.37 2.60 2.81 3.00 3.18 3.35 035 1.57 1.66 1.75 1.92 2.14 2.35 2.47 2.77 3.03 3.27 3.50 3.71 3.91 04 1.79 1.90 2.00 2.19 2.45 2.68 2.83 3.16 3.46 3.74 4.00 4.24 4.47 045 2.01 2.13 2.25 2.46 2.76 3.02 3.18 3.56 3.90 4.21 4.50 4.77 5.03 05 2.24 2.37 2.50 2.74 3.06 3.35 3.54 3.95 4.33 4.68 5.00 5.30 5.59 055 2.46 2.61 2.75 3.01 3.37 3.69 3.89 4.35 4.76 5.14 5.50 5.83 6.15 06 2.68 2.85 3.00 3.29 3.67 4.02 4.24 4.74 5.20 5.61 6.00 6.36 6.71 065 2.91 3.08 3.25 3.56 3.98 4.36 4.60 5.14 5.63 6.08 6.50 6.89 7.27 07 3.13 3.32 3.50 3.83 4.29 4.70 4.95 5.53 6.06 6.55 7.00 7.42 7.83 08 3.58 3.79 4.00 4.38 4.90 5.37 5.66 6.32 6.93 7.48 8.00 8.49 8.94 09 4.02 4.27 4.50 4.93 5.51 6.04 6.36 7.12 7.79 8.42 9.00 9.55 10.06 10 4.47 4.74 5.00 5.48 6.12 6.71 7.07 7.91 8.66 9.35 10.00 10.61 11.18 12 5.37 5.69 6.00 6.57 7.35 8.05 8.49 9.49 10.39 11.22 12.00 12.73 13.42 192 Hardened Stainless Steel • Achieves up to 16%* greater impact than competitive high pressure nozzles, making them the best value on the market today • Hardened 416 stainless steel, the industry standard for long‑life • Reliable performance in high pressure applications up to 4000 psi (276 BAR) • High impact spray in a tightly formed fan pattern • Consistent, even distribution provides uniform cleaning without overlapping • Protected outlet design guards the orifice during installation and use • Versatile 1/4” and 1/8” NPT connections suit a variety of applications • Comes in spray angles of 0º, 5º, 15º, 25º, 40º • Improved marking for easy identification and replacement *Commissioned with an independent tester Available Spray Angles** 1/4” NPT 1/8” NPT Degree 02 0˚ 5˚ 15˚ 25˚ 40˚ 0˚ 5˚ 15˚ 25˚ 40˚ X X X X X X X X X X In Stock X Available Contact Factory Sample Part Number: HP1/4-2504 Size 03 035 04 045 05 055 06 065 07 075 08 085 09 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Breakdown: HP model HP X 1/4 - connection 1/4” NPT 25 spray angle 25º - 04 size 04 X **For additional sizes, please contact Technical/Applications at 1-800-445-8360 US Units Spray Nozzle Size 02 03 035 04 045 05 055 06 065 07 075 08 085 09 1/8” NPT 1/4” NPT X X X X X X X X X X X X X X X X X X X X X X X X X X 300 0.55 0.82 0.96 1.10 1.23 1.37 1.51 1.64 1.78 1.92 2.05 2.19 2.33 2.46 400 0.63 0.95 1.11 1.26 1.42 1.58 1.74 1.90 2.06 2.21 2.37 2.53 2.69 2.85 500 0.71 1.60 1.24 1.41 1.59 1.77 1.94 2.12 2.30 2.47 2.65 2.83 3.01 3.18 600 700 40 Flow Rate (L/min) Pressure (BAR) 50 60 70 0.77 1.16 1.36 1.55 1.74 1.94 2.13 2.32 2.52 2.71 2.90 3.10 3.29 3.49 Metric Units Spray Nozzle Size 02 03 035 04 045 05 055 06 065 07 075 08 085 09 1/8” NPT 1/4” NPT X X X X X X X X X X X X X X X X X X X X X X X X X X 15 1.77 2.65 3.09 3.53 3.97 4.41 4.86 5.30 5.74 6.18 6.62 7.06 7.50 7.95 20 2.04 3.06 3.57 4.08 4.59 5.10 5.61 6.12 6.63 7.14 7.65 8.16 8.66 9.17 30 2.50 3.75 4.37 4.99 5.62 6.24 6.87 7.49 8.12 8.74 9.36 9.99 10.60 11.20 Flow Rate (US GPM) Pressure (PSI) 800 1000 1250 1500 2.88 4.32 5.05 5.77 6.49 7.21 7.93 8.65 9.37 10.00 10.80 11.50 12.20 12.90 0.84 1.25 1.46 1.67 1.88 2.09 2.30 2.51 2.72 2.93 3.14 3.35 3.56 3.76 3.22 4.84 5.64 6.45 7.25 8.06 8.86 9.67 10.40 11.20 12.00 12.80 13.70 14.50 0.89 1.34 1.57 1.79 2.01 2.24 2.46 2.68 2.91 3.13 3.35 3.58 3.80 4.02 3.53 5.30 6.18 7.06 7.95 8.83 9.71 10.50 11.40 12.30 13.20 14.10 15.00 15.80 193 1.00 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 4.50 3.81 5.72 6.67 7.63 8.58 9.54 10.40 11.40 12.40 13.30 14.30 15.20 16.20 17.10 1.12 1.68 1.96 2.24 2.52 2.80 3.07 3.35 3.68 3.91 4.19 4.47 4.75 5.03 1.22 1.84 2.14 2.45 2.76 3.06 3.37 3.67 3.98 4.29 4.59 4.90 5.21 5.51 80 100 4.08 6.12 7.14 8.16 9.17 10.10 11.20 12.20 13.20 14.20 15.20 16.30 17.30 18.30 4.56 6.84 7.98 9.12 10.20 11.40 12.50 13.60 14.80 15.90 17.10 18.20 19.30 20.50 2000 2500 150 200 1.41 2.12 2.47 2.83 3.18 3.54 3.89 4.24 4.60 4.95 5.30 5.66 6.01 6.36 5.58 8.38 9.77 11.10 12.50 13.90 15.30 16.70 18.10 19.50 20.90 22.30 23.70 25.10 1.58 2.37 2.77 3.16 3.56 3.95 4.35 4.74 5.14 5.53 5.93 6.32 6.72 7.12 6.45 9.67 11.20 12.80 14.50 16.10 17.70 19.30 20.90 22.50 24.10 25.70 27.40 29.00 3000 1.73 2.06 3.03 3.46 3.90 4.33 4.76 5.20 5.63 6.06 6.50 6.93 7.36 7.79 3500 1.87 2.81 3.27 3.74 4.21 4.68 5.14 5.61 6.08 6.55 7.02 7.48 7.95 8.42 4000 2.00 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 SPECIALTY SPRAY NOZZLES HP-High Pressure Nozzle Car Wash Nozzle Kits Save time by not having to order each replacement tip individually, just order one part number for your model of car wash to receive the entire replacement kit. When you install Hypro spray tips, your wash will be brought back to life with increased performance, making your car wash better than new! Washworld High Velocity® Arch & Under Carriage Kits Car Wash Kits HPWWHV HPWWHVUC UASWWHV UASWWHVUC Kit Description Wash World High Velocity Arch Nozzles, Hardened Stainless Steel Wash World High Velocity Under-Carriage Nozzles, Hardened Stainless Steel Wash World High Velocity Arch Nozzles, Premium Ceramic Orifice Wash World High Velocity Under-Carriage Nozzles, Premium Ceramic Orifice PDQ® Laser 4000 Kits Car Wash Kits Quantity Contains: 1 HP1/4-4003 1 HP1/4-2503 14 HP1/4-1504 2 HP1/4-1505 1 HP1/4-4004 7 HP1/4-1508 4 HP1/4-4003 1 UAS1/4-40-03 1 UAS1/4-25-03 14 UAS1/4-15-04 2 UAS1/4-15-05 1 UAS1/4-40-04 7 UAS1/4-15-08 4 UAS1/4-40-03 UASPDQ4000 HPPDQ4000 PDQ Laser 4000 Stainless/ Ceramic Nozzles PDQ Laser 4000 Arch 1/4” Hardened Stainless Steel Nozzles Quantity Contains: 11 UAS1/4-15-04 5 UAS1/4-15-05 1 UAS1/4-25-03 1 UAS1/4-40-03 11 HP1/4-1504 5 HP1/4-1505 1 HP1/4-2503 1 HP1/4-4003 D&S 5000TM, Super 5000 & Quicksilver, Arch & Wheel Blaster Kits Car Wash Kits HPDS5000 HPDSQ20WB 194 Kit Description Kit Description D&S 5000, Super 5000, Quicksilver 38 GPM Arch Nozzles D&S Quicksilver Wheel Blaster Option Nozzles Quantity Contains: 4 HP1/4-0508 4 HP1/4-0509 4 HP1/4-1502 4 HP1/4-2504 6 HP1/4-2507 6 HP1/4-4006 4 HP1/8-00065 4 HP1/8-0504 • Precision-molded orifice provides accurate and consistent full cone spray pattern • Widely used 1/8” and 1/4” NPT or 1/8" and 1/4" BSP connections • Available in a variety of standard flow and cone angle options to fit application requirements • Color coded by flow rate to simplify nozzle installation and replacement • Excellent wear and chemically-resistant Solef® Polyvinylidene Fluoride (PVDF) polymer • Ideal for low pressure rinsing, washing, coating, cooling, and additive application US Units Nozzle Thread Flow Rate (Gallons per Minute) of Water at 68ºF Cone Angle Color Sample Part Number: 90A1FP2.0 Pressure (PSI) 10 20 30 40 50 60 70 Breakdown: 80 90 100 125 150 90A1FP1.0 1/8” NPT Orange 45º 0.10 0.14 0.16 0.19 0.21 0.22 0.24 0.25 0.27 0.28 0.31 0.34 90A1FP1.5 1/8” NPT Red 55º 0.15 0.20 0.25 0.28 0.31 0.34 0.36 0.38 0.40 0.42 0.47 0.51 90A1FP2.0 1/8” NPT Light Blue 60º 0.20 0.27 0.33 0.37 0.41 0.45 0.48 0.51 0.54 0.56 0.62 0.68 90A1FP3.0 1/8” NPT Lime Green 50º 0.30 0 .41 0.49 0.56 0.62 0.67 0.72 0.76 0.81 0.85 0.93 1.01 90A1FP3.5 1/8” NPT Terracotta 60º 0.35 0.48 0.57 0.65 0.72 0.78 0.84 0.89 0.94 0.99 1.09 1.18 90A1FP5.0 1/8” NPT Blue 80º 0.50 0.68 0.82 0.93 1.03 1.12 1.20 1.27 1.34 1.41 1.56 1.69 90A2FP6.5 1/4” NPT Purple 50º 0.65 0.89 1.07 1.21 1.34 1.46 1.56 1.66 1.75 1.83 2.03 2.20 70º 1.00 1.37 1.64 1.87 2.06 2.24 2.40 2.55 2.69 2.82 3.12 3.38 90A2FP10 1/4” NPT Olive Green Metric Units Nozzle Thread Color Cone Angle @ 1 Bar Flow Rate (L/min) of Water at 20°C Pressure (BAR 0.5 1 2 3 4 5 7 10 90B1FP1 1/8” BSP Orange 45° 0.32 0.46 0.64 0.79 0.91 1.02 1.21 1.44 90B1FP1.3W 1/8” BSP Natural 90° 0.42 0.59 0.84 1.03 1.19 1.33 1.57 1.87 90B1FP1.5 1/8” BSP Red 55° 0.48 0.68 0.97 1.18 1.37 1.53 1.81 2.16 90B1FP2 1/8” BSP Light Blue 60° 0.64 0.91 1.29 1.58 1.82 2.04 2.41 2.88 90B1FP2W 1/8” BSP Light Blue 90° 0.64 0.91 1.29 1.58 1.82 2.04 2.41 2.88 90B1FP3 1/8” BSP Lime Green 50° 0.97 1.37 1.93 2.37 2.74 3.06 3.62 4.32 90B1FP3.5 1/8” BSP Terracotta 60° 1.13 1.60 2.26 2.76 3.19 3.57 4.22 5.05 90B1FP3.7W 1/8” BSP Gray 120° 1.19 1.69 2.39 2.92 3.37 3.77 4.46 5.33 90B1FP5 1/8” BSP Blue 80° 1.61 2.28 3.22 3.95 4.56 5.10 6.03 7.21 90B2FP6.5 1/4” BSP Purple 50° 2.10 2.96 4.19 5.13 5.93 6.63 7.84 9.37 90B2FP10 1/4” BSP Olive Green 70° 3.22 4.56 6.45 7.90 9.12 10.1 12.0 14.4 195 90 material 90 = PVDF A1 FP 2.0 thread family nozzle size A1 = 1/8” NPT FP see table A2 = 1/4” NPT B1 = 1/8” BSP B2 = 1/4” BSP SPECIALTY SPRAY NOZZLES FP-FulcoJet™ Full Cone Nozzle FanJet™ - Flat Fan PVDF Nozzle • Most popular selling nozzle for lower pressure car wash applications • Chemically-resistant Polyvinylidene Fluoride (PVDF) polymer • Pressures up to 500 PSI • Available spray angles ranging from 0, 25, 40, 65, 80 • One-piece male 1/4” NPT and 1/4" or 1/8" BSP • Hex body prevents distortion of the orifice and provides quick and easy installation • Part number is molded into front of nozzle Available Spray Angles* Degree Size 06 07 01 015 02 025 03 04 05 X X X X X X 0º 1/4” NPT X Available 08 Contact Factory 10 15 20 30 X X X X 40 25º X X X X X X X X X X X X X 40º X X X X X X X X X X X X X X 65º X X X X X X X X X X X X X X 80º X X X X X X X X X X X X X X Sample Part Number: 90A2CM04E80 Breakdown: 50 X 90 A2 CM 04 E 80 material thread model nozzle pattern fan angle size degrees 90 = PVDF A1 = 1/8” NPT NPT even fan A1 = 1/8” NPT B1 = 1/8" BSP B2 = 1/4" BSP *For additional sizes, please contact Technical/Applications at 1-800-445-8360 Flow Rate, (US GPM) Spray Nozzle Size Color 01 Gray Flow rate, (L/min) Spray Nozzle Size Color 0.5 0.09 0.10 0.11 0.12 0.13 0.14 0.16 0.19 0.22 0.27 0.32 0.35 02 Gray 0.33 0.46 0.65 0.80 0.92 1.03 1.22 Pressure (PSI) 30 40 50 60 70 80 100 150 200 300 400 500 Pressure (BAR) 1 2 3 4 5 7 015 Gray 0.13 0.15 0.17 0.18 0.20 0.21 0.24 0.29 0.34 0.41 0.47 0.53 03 Gray 0.49 0.69 0.98 1.20 1.39 1.55 1.83 02 Gray 0.17 0.20 0.22 0.24 0.26 0.28 0.32 0.39 0.45 0.55 0.63 0.71 04 Gray 0.65 0.92 1.31 1.60 1.85 2.07 2.44 025 Gray 0.22 0.25 0.28 0.31 0.33 0.35 0.40 0.48 0.56 0.68 0.79 0.88 05 Gray 0.82 1.15 1.63 2.00 2.31 2.58 3.06 03 Gray 0.26 0.30 0.34 0.37 0.40 0.42 0.47 0.58 0.67 0.82 0.95 1.06 06 Gray 0.98 1.39 1.96 2.40 2.77 3.10 3.67 04 Gray 0.35 0.40 0.45 0.49 0.53 0.57 0.63 0.77 0.89 1.10 1.26 1.41 08 Gray 1.31 1.85 2.61 3.20 3.70 4.13 4.89 05 Gray 0.43 0.50 0.56 0.61 0.66 0.71 0.79 0.97 1.12 1.37 1.58 1.77 10 Gray 1.63 2.31 3.27 4.00 4.62 5.16 6.11 06 Gray 0.52 0.60 0.67 0.73 0.79 0.85 0.95 1.16 1.34 1.64 1.90 2.12 15 Gray 2.45 3.46 4.90 6.00 6.93 7.75 9.17 07 Gray 0.61 0.70 0.78 0.86 0.93 0.99 1.11 1.36 1.57 1.92 2.21 2.47 20 Gray 3.27 4.62 6.53 8.00 9.24 10.3 12.2 08 Gray 0.69 0.80 0.89 0.98 1.06 1.13 1.26 1.55 1.79 2.19 2.53 2.83 30 Gray 4.90 6.93 9.80 12.0 13.8 15.4 18.3 10 Gray 0.87 1.00 1.12 1.22 1.32 1.41 1.58 1.94 2.24 2.74 3.16 3.54 40 Gray 6.53 9.24 13.0 16.0 18.4 20.6 24.4 15 Gray 1.30 1.50 1.68 1.84 1.98 2.12 2.37 2.90 3.35 4.11 4.74 5.30 50 Gray 8.16 11.5 16.3 20.0 23.0 25.8 30.5 20 Gray 1.73 2.00 2.24 2.45 2.65 2.83 3.16 3.87 4.47 5.48 6.32 7.07 30 Gray 2.60 3.00 3.35 3.67 3.97 4.24 4.74 5.81 6.71 8.22 9.49 10.61 40 Gray 3.46 4.00 4.47 4.90 5.29 5.66 6.32 7.75 8.94 10.95 12.65 14.14 50 Gray 4.33 5.00 5.59 6.12 6.61 7.07 7.91 9.68 11.18 13.69 15.81 17.68 196 The Hypro® range of misting nozzles produce a high percentage of droplets smaller than 50 microns making the sprays suitable for humidification and evaporative cooling. They are chemically resistant to also allow use with pesticides, disinfectants, and odor control agents as well as dust suppression. • A variety of connection options match most applications • Corrosion-resistant construction • Strainers are included on many models to extend service life • Anti-drip checks are standard in PF and AFD models Flanged Nozzles: F-Flat Fan US gal/hr @ pressure (PSI) L/[email protected] pressure (bar) Color Spray Angle White 65 2.89 3.54 3.96 4.57 5.60 11,59 13,38 16,39 18,93 21,16 F65-005 Olive Green 80 4.00 4.90 5.48 6.32 7.75 16,04 18,52 22,68 26,19 29,28 F80-0067 40 60 75 100 150 3 4 6 8 10 Common Use Cooling & Humidification Pattern Fan or Hollow Cone Technology Elliptical Orifice or Swirl Part Number Nozzle Only Material Polyacetal 30HAF01110 30HAF01-65 30HAF01480 30HAF01570 Spray Angle 65-110º Pressure Range 40-150 PSI (3-10 BAR) Configuration Nozzles, Push-fit, or MNPT Flanged Nozzles: HAF-Hollow Cone Spray Angle Color White Cream Mint Green White 110 65 80 70 US gal/hr @ pressure (PSI) L/[email protected] pressure (bar) 40 60 75 100 150 3 4 6 1.00 1.00 1.43 1.51 1.22 1.22 1.75 1.85 1.37 1.37 1.96 2.07 1.58 1.58 2.26 2.39 1.94 1.94 2.77 2.92 4,01 4,01 5,73 6,05 4,63 4,63 6,62 6,99 5,67 5,67 8,10 8,56 8 10 6,55 7,32 6,55 7,32 9,36 10,46 9,88 11,05 Retaining Nuts for Flanged Tips Part Number Description 251032WH 3/8 inch BSP Retaining Nut White Polypropylene 251032GY 3/8 inch BSP Retaining Nut Gray Polypropylene 251032BL 3/8 inch BSP Retaining Nut Black Polypropylene 197 Features Part Number Nozzle Only SPECIALTY SPRAY NOZZLES Misting Nozzles - F, HAF, PF, AFD, AF Misting Nozzle Accessories Push-fit Anti-drip Nozzle: PF-Hollow Cone 3/8” US gal/hr @ pressure (PSI) L/[email protected] pressure (bar) Color Spray Angle 40 60 75 100 150 3 4 6 8 10 Part Number with Cup Strainer White Black White Black 80 80 105 105 0.91 0.91 1.27 1.27 1.11 1.11 1.56 1.56 1.25 1.25 1.74 1.74 1.44 1.44 2.01 2.01 1.76 1.76 2.46 2.46 3,65 3,65 5,09 5,09 4,21 4,21 5,88 5,88 5,16 5,16 7,20 7,20 5,96 5,96 8,31 8,31 6,66 6,66 9,29 9,29 30PFAF008-80 30PFAF008-80BL 30PFAF013-105 30PFAF013-105BL 1 2 3 Misting Nozzle Accessories for Push-Fit Anti-drip Nozzles Reference Number Part Number Description 1 32195Q3269 Push-in Porous Plastic 250 Mesh Post Filter 2 141418 Barbed Tee 1⁄8 inch FNPT x 1⁄4 inch Barbs Black (6 mm) 2 10AEE930003 Barbed Tee 1⁄8 inch FNPT x 1⁄4 inch Barbs White (6 mm) 2 383818 Barbed Tee 1⁄8 inch FNPT x 3⁄8 inch Barbs Black (6 mm) 3 1212S18 Push-in Tee 1⁄2 inch SLIP x 1⁄2 inch SLIP x 1⁄8 inch (F) 1/8”MNPT Anti-drip Nozzle: AFD-Hollow Cone Color Spray Angle Gray Cream Blue 80 105 100 US gal/hr @ pressure (PSI) L/[email protected] pressure (bar) 40 60 75 100 150 3 4 6 8 10 0.72 1.20 1.68 0.88 1.47 2.06 0.99 1.64 2.30 1.14 1.90 2.66 1.39 2.32 3.25 2,89 4,81 6,74 3,34 5,55 7,78 4,09 6,80 9,53 4,72 7,85 11,01 5,28 8,78 12,31 Part Number Nozzle Only Part Number with Cup Strainer 301AFD0.7-80 301AFD1.2-105 301AFD1.6-100 CS301AFD0.7-80 CS301AFD1.2-105 - 1/8” MNPT Nozzle: AF-Hollow Cone US gal/hr @ pressure (PSI) L/[email protected] pressure (bar) Color Spray Angle 40 60 75 100 150 White Gray White Cream Blue Yellow 65 80 80 105 100 70 0.48 0.72 0.72 1.20 1.68 5.00 0.59 0.88 0.88 1.47 2.06 6.12 0.66 0.99 0.99 1.64 2.30 6.85 0.76 1.14 1.14 1.90 2.66 7.91 0.93 1,92 1.39 2,89 1.39 2,89 2.32 4,81 3.25 6,74 9.68 20,05 1 3 4 6 8 2,22 3,34 3,34 5,55 7,78 23,15 2,72 4,09 4,09 6,80 9,53 28,35 3,14 4,72 4,72 7,85 11,01 32,74 2 10 Part Number Nozzle Only 3,51 301AF0.4-65 5,28 301AF0.7-80 5,28 301AF0.7-80W 8,78 301AF1.2-105C 12,31 301AF1.6-100 36,61 301AF5.0-70 Part Number with SS Cup Strainer Part Number with SS Post Strainer Part Number with Plastic Filter CS301AF0.4-65 CS301AF0.7-80 CS301MNF-W CS301AF1.2-105C CS301AF1.6-100 - 301AFUSA0.5 301AFUSA1.0 301MNF-W 301AFUSA2.0 301AFUSA3.0 - PP301AF0.4-65 PP301AF0.7-80 PP301AF0.7-80W PP301AF1.2-105C PP301AF1.6-100 - 3 Misting Nozzle Accessories for 1/8” MNPT Nozzle Reference Number Part Number Description 1 32100200 Cup Strainer 200 Mesh (Fits Rear of Threaded Misting Nozzles) 2 32PIFA250 Push-in 200 Mesh Post Strainer 3 27101612 3⁄8 inch BSP x 1⁄2 inch Wet Boom Body 198 For Knapsack/Backpack Sprayers The Hypro Even Flat Fan spray nozzle creates a consistent pattern that is ideal for single nozzle applications. • Commonly used with knapsack sprayers for precise control • 80º angle distributes a medium fine spray evenly across the swath • Mixed droplet spectrum is ideal for all targets • One piece design US Units Nozzle Droplet Size Size Spray Angle Spray Width 20 in height (in) Pressure Flow Rate (PSI) (GPM) F 20.0 0.086 F 80 34 01 30.0 0.098 F 40.0 0.106 F 20.0 0.129 F 80 34 015 30.0 0.145 F 40.0 0.159 M 20.0 0.173 F 80 34 02 30.0 0.193 F 40.0 0.211 20.0 0.259 M M 80 34 30.0 0.291 03 F 40.0 0.317 Droplet size based on ASABE S572.1 standard. Application rates shown reflect single nozzle applications at walking speeds. Metric Units Nozzle Droplet Spray Angle Size Size Spray Width 50 cm height (m) Pressure (BAR) Flow Rate (LPM) F 2 F 2.5 80 0.8 01 F 3 F 2 F 2.5 015 80 0.8 F 3 M 2 F 2.5 02 80 0.8 F 3 M 2 M 2.5 03 80 0.8 3 F Droplet size based on ASABE S572.1 standard. Application rates shown reflect single nozzle applications at walking speeds. 0.327 0.370 0.400 0.490 0.550 0.600 0.653 0.730 0.800 0.980 1.100 1.200 Gallons per Acre (Single Nozzle Applications) 1 2 15.3 17.3 18.7 22.9 25.7 28.1 30.5 34.1 37.4 45.8 51.4 56.1 MPH 7.6 8.7 9.4 11.5 12.9 14.0 15.3 17.1 18.7 22.9 25.7 28.1 3 5.1 5.8 6.2 7.6 8.6 9.4 10.2 11.4 12.5 15.3 17.1 18.7 Features 4 3.8 4.3 4.7 5.7 6.4 7.0 7.6 8.5 9.4 11.5 12.9 14.0 Application Rate L/ha (Single Nozzle Applications) 2 3 117 132 143 175 197 215 234 261 286 350 393 429 78 88 95 117 131 143 156 174 191 234 262 286 199 KM/H 4 58 66 72 88 98 107 117 130 143 175 197 215 5 47 53 57 70 79 86 93 104 114 140 157 172 Common Use Knapsack Pattern Even Flat Fan Technology Elliptical Orifice Material Polyacetal Spray Angle 80º Pressure Range 20-40 PSI (2-3 BAR) Configuration Nozzle E80-01 E80-015 E80-02 E80-03 CAP00-01 CAP00-015 CAP00-02 CAP00-03 Part Numbers Nozzles 80º Caps (25 Pack) SPECIALTY SPRAY NOZZLES Flat Fan Spray Nozzles - Even 80 o DeflecTip and PoliJet 53 -127 o o For Knapsack/Backpack Sprayers The DeflecTip and PoliJet wide-angle flood fan nozzle creates a wide pattern at very low pressures while creating mainly medium and coarse droplets. It is well suited for sprayers using very low pressures, including manual sprayers. • Different spray angles offer a choice of swath widths • PoliJet nozzles are designed for knapsack applications, giving a low drift, course, even spray • Circular orifice reduces the chances of blocking US Units: DeflectTip Nozzle Droplet Size Spray Angle Size Spray Width 20 in height (in) VC M 80º 34 @ 40 PSI F F XC M 95º 44 @ 40 PSI DT0.75 M F C M 105º 52 @ 40 PSI DT1.0 M F C M 105º 52 @ 40 PSI DT1.5 M M Droplet size is based on ASABE S572.1 standard. DT0.5 Pressure (PSI) Flow Rate (GPM) 10.0 20.0 30.0 40.0 10.0 20.0 30.0 40.0 10.0 20.0 30.0 40.0 10.0 20.0 30.0 40.0 0.05 0.07 0.09 0.10 0.08 0.11 0.13 0.15 0.10 0.14 0.17 0.20 0.15 0.21 0.26 0.30 Metric Units: DeflectTip Nozzle Droplet Size Spray Angle Size Spray Width 50 cm height (m) C F 80º 0.8 @ 3 BAR DT0.5 F C M 95º 1.1 @ 3 BAR DT0.75 F M M 105º 1.3 @ 3 BAR DT1.0 F M M 105º 1.3 @ 3 BAR DT1.5 M Droplet size is based on ASABE S572.1 standard. Pressure (BAR) Flow Rate (LPM) 1 2 3 1 2 3 1 2 3 1 2 3 0.23 0.32 0.39 0.34 0.48 0.59 0.46 0.64 0.79 0.68 0.97 1.18 Gallons per Acre (Single Nozzle Application) 1 8.8 12.4 15.9 17.7 10.9 15.0 17.7 20.4 11.4 16.0 19.4 22.8 17.1 23.9 29.6 34.2 ASABE Droplet Size Spray Angle Spray Width 20 in height (in) C M 53º 20 @ 40 PSI M C M 90º 40 @ 40 PSI AN1.2 M C C 113º 60 @ 40 PSI AN1.8 C C C 127º 80 @ 40 PSI AN2.4 C Droplet size is based on ASABE S572.1 standard. AN0.6 Pressure (PSI) Flow Rate (GPM) 10.0 20.0 40.0 10.0 20.0 40.0 10.0 20.0 40.0 10.0 20.0 40.0 0.16 0.22 0.27 0.32 0.45 0.55 0.48 0.67 0.82 0.63 0.90 1.10 Metric Units: PoliJet BCPC Nozzle Droplet Spray Angle Size Size AN0.6 AN1.2 AN1.8 AN2.4 C M M C M M C C C C C C BCPC CODING FINE Spray Width 50 cm height (m) 53º 0.5 @ 3 BAR 90º 1.0 @ 3 BAR 113º 1.5 @ 3 BAR 127º 2.0 @ 3 BAR MEDIUM Pressure (BAR) Flow Rate (LPM) 1 2 3 1 2 3 1 2 3 1 2 3 0.60 0.85 1.04 1.20 1.70 2.08 1.80 2.55 3.12 2.40 3.39 4.16 MPH 4.4 6.2 8.0 8.8 5.4 7.5 8.8 10.2 5.7 8.0 9.7 11.4 8.5 12.0 14.8 17.1 3 2.9 4.1 5.3 5.9 3.6 5.0 5.9 6.8 3.8 5.3 6.5 7.6 5.7 8.0 9.9 11.4 Features 4 2.2 3.1 4.0 4.4 2.7 3.7 4.4 5.1 2.8 4.0 4.8 5.7 4.3 6.0 7.4 8.5 Application Rate L/ha (Single Nozzle Application) 2 3 81 115 141 94 133 163 105 148 182 157 223 273 US Units: PoliJet Nozzle Size 2 KM/H 54 77 94 63 89 109 70 99 121 105 148 182 4 41 58 71 47 66 81 52 74 91 79 111 136 5 33 46 56 38 53 65 42 59 73 63 89 109 Gallons per Acre (Single Nozzle Application) 1 47.2 66.7 81.7 47.0 66.5 81.5 47.2 66.7 81.7 46.9 66.3 81.3 2 MPH 23.6 33.4 40.9 23.5 33.3 40.7 23.6 33.3 40.8 23.5 33.2 40.6 3 15.7 22.2 27.2 15.7 22.2 27.2 15.7 22.2 27.2 15.6 22.1 27.1 4 11.8 16.7 20.4 11.8 16.6 20.4 11.8 16.7 20.4 11.7 16.6 20.3 Application Rate L/ha (Single Nozzle Application) 2 361 511 625 360 509 624 361 510 625 359 508 622 COARSE BCPC droplet size based on BCPC standard. Application rates shown reflect single nozzle applications at walking speeds. 200 3 241 340 417 240 339 416 241 340 417 239 338 415 KM/H 4 181 255 313 180 255 312 180 255 312 179 254 312 5 144 204 250 144 204 249 144 204 250 144 203 249 Common Use Knapsack Pattern Flood Technology Deflection Material Polyacetal Spray Angle 53º-127º Pressure Range 15-45 PSI (1-3 BAR) Configuration Nozzle DT Part Numbers Nozzles Caps (25 Pack) 30DT0.5 CAP30-20 30DT0.75 CAP30-20 30DT1.0 CAP30-20 30DT1.5 CAP30-20 AN Part Numbers Nozzles Caps (25 Pack) 30AN0.6 CAP30-20 30AN01.2 CAP30-20 30AN01.8 CAP30-20 30AN02.4 CAP30-20 CAPS, FILTERS AND TRAINING TOOLS Spray Nozzle Caps and Adapters Hypro® caps provide trouble-free spray nozzle installation and sealing on Hypro ProFlo nozzle bodies and several other common makes. • Color-coded to ISO standards for nozzle flow to simplify nozzle selection and identification in the field • Available in configurations optimized to fit a variety of spray nozzle geometries • Caps for fan pattern nozzles automatically align nozzles for enhanced spray uniformity ISO Standard Fan Hardi ® Deflect Nozzle No-offset European Fan (Thick body) Standard Round (Non-aligning) Albuz® Round (Thick flange) HCX, FCX DC/CR, HAF, APM flanged hose barbs Ceramic Disc, ATR, HCA, TVI CAP04-20 Shut-off Threaded Blank 1/4”FNPT Std. Pack CAP09-20 CAP10-20 25 Fits: ULD, GA, LD, VP, TR, OC, F, E, AXI, ADI, OCI ULD, GA, LD, VP, TR, OC, F, E, AXI, ADI, OCI DT, PoliJet AVI, AVITWIN, ESI, APG, APE Black CAP00-20 16842490 CAP30-20 CAP01-20 Orange CAP00-01 - - CAP01-01 CAP04-01 CAP05-01 - - 25 Green CAP00-015 - - CAP01-015 CAP04-015 CAP05-015 - - 25 Yellow CAP00-02 - - CAP01-02 CAP04-02 CAP05-02 - - 25 Lilac CAP00-025 - - CAP01-025 CAP04-025 CAP05-025 - - 25 Blue CAP00-03 - - CAP01-03 CAP04-03 CAP05-03 - - 25 Brown Red CAP00-035 - - - - - - - 25 CAP05-20 30Q2603-20 Red CAP00-04 - - CAP01-04 CAP04-04 CAP05-04 - - 25 Brown CAP00-05 - - CAP01-05 CAP04-05 CAP05-05 - - 25 Gray CAP00-06 - - CAP01-06 CAP04-06 CAP05-06 - - 25 White CAP00-08 - - CAP01-08 CAP04-08 CAP05-08 - - 25 Light Blue CAP00-10 - - CAP01-10 CAP04-10 - - - 25 - - CAP01-15 CAP04-15 - - - 25 16842491 22W11MF64 22W11MF64 22W11MF64 22W11MF64 - 22W11MF64 - CAP00-15 Lime Green Included EPDM seal 22W11MF64 Included EPDM o-ring Included Nitrile seal Separate Viton® seal 22W11MF64V 402105-030 - Available for order through HYPRO-EU only (Cambridge,UK) - - - - 65-BS205 - - 22W11MF64V 22W11MF64V 22W11MF64V 22W11MF64V 65-VBS205 22W11MF64V - Push-to-Connect Spray Caps Size 1/4" 3/8” 1/4” 3/8” Push-to-Connect (PTC) Cap Part Numbers 25 Std. Pack 4200-0060 4200-0061 4200-0062 4200-0063 1 Per Bag BG-4200-0060 BG-4200-0061 BG-4200-0062 BG-4200-0063 Gasket part Number 22W11MF64 22W11MF64 10BG-1700-0255 10BG-1700-0255 Gasket Type Std Std Split Split Elbow and Double Adapters for Spray Nozzle Cap Part number Description 4200N-0017 45 Double w/ Gasket 4200N-0018 90 Elbow w/ Gasket 2270-0136 Cap Filler Disk Hardi® and Jacto® Adapters Part Number Adapters For Description 9950-0024 Hardi 9950-0027 Jacto 10 pack of adapters for converting nozzle body to accept Hypro cap Hardi is a registered trademark of Hardi International A/S. Jacto is a registered trademark of Jacto Inc. All other brand or product names are trademarks or registered trademarks of Pentair Ltd. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 201 Spray Nozzle Cap – TwinCap The Hypro® TwinCap is a simple, compact way of accommodating two spray nozzles back to back. This design allows you to apply the volume per acre you want, at the speed you want, without compromising spray quality. • Improve control of plant diseases, insects, and difficult weeds • Twin 30° angles improve canopy penetration • Combined forward and backward angles enhance coverage on stems and leaves • Holds any two standard dimension nozzles, including Hypro ULD, GA, LD, ADI, VP, TR, AXI, Flat, and Even nozzles • User can select nozzles for the most effective spray • Available in standard Polyacetal or in Gray PVDF for acid sprays Part Numbers TwinCaps, less nozzles Standard TwinCap for agrochemicals Gray Acid-resistant Twin cap for defoliants Standard TwinCap with one exit blanked for a single angled spray Hardi TwinCap 152607TC 15Q2530TC VPTCAP 16Q2530TC Replacement Parts 22W11MF64 22W11MF64V 65MN011X1.3 65VBS0113-13 30Q3834 Standard cap seal (A) Viton cap seal for Acid (A) Standard nozzle o-ring seal (B) Viton nozzle o-ring seal for Acid (B) Replacement VPTCAP plug Nozzle Strainers 1 2 Ref # 1 1 2 2 3 4 4 4 4 4 Part Number TS01-50 TS01-100 TS02-50 TS02-100 TS03-25 32100530 32100550 32100510 32100050 32100010 General Strainer Recommendations Nozzle Flow Rate at 40 PSI (2.8 BAR) Less than 0.10 0.10-0.39 0.40-0.79 0.80-2.00 ISO Color Blue Green Blue Green Black White Blue Green Blue Green 3 Mesh 50 100 50 100 25 30 50 100 50 100 Material Polypropylene Nylon Stainless Steel 4 Description Premium flow nozzle strainer Premium flow nozzle strainer for Guardian & GuardianAIR Twin Slotted nozzle strainer Nozzle filter with check Nozzle filter without check Strainer Mesh 200 100 50 25 202 Example Fan Nozzle Size 005-0067 01-035 04-06 08-20 • Plastic molded portable demonstration table with open see-through design. • Clear 1” boom featuring three 5-way ProFlo nozzle bodies and Express End Caps and Express Tee. • Lightweight design for easy transportation and storage. • Powered by 115 VAC or 220 VAC SHURflo pump with filter. • Standard Boom Addition - Clear 1” boom featuring three 5-way ProFlo nozzle bodies with standard boom ends. • Use with Express End Cap boom (provided with table) & standard boom (3430-0017) for visual demonstration of Express End Cap benefits. Part Number Description 3040-0015 3040-0016 3040-0017 3040-0018 3040-0019 3040-0020 Standard spray table 115VAC, comes with express fittings boom and spray nozzle kit. Standard Spray table 220VAC, comes with express fittings boom and spray nozzle kit. Addition boom with dead end – to allow demonstration of that along with express end cap boom. ProStop-E Boom Addition DuoReact Boom Addition Carrying Case Spray Nozzle Calibration Tools Reference Number Part Number 1 9950-0022 34 oz. Calibration Jug 1 9950-0023 100 oz. Calibration Jug 2 9950-0031 Spray Nozzle Calibration pressure gauge 3 9950-0028 Water Sensitive paper (50 pack) 76x26mm (instructions included) 1 2 Description 3 Kynar™ is a registered trademark of Arkema, Inc. Desmopan® is a registered trademark of Bayer Aktiengesellschaft, Farbenfabriken. Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 203 CAPS, FILTERS AND TRAINING TOOLS Spray Demonstration Tables Broadcast and Turf Application Chart-20” Spacing Nozzle Size 01 015 02 025 03 035 04 05 06 08 10 15 Pressure (PSI) Flow Rate (GPM) 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 0.06 0.09 0.10 0.12 0.14 0.16 0.17 0.09 0.13 0.15 0.18 0.21 0.24 0.25 0.12 0.17 0.20 0.24 0.28 0.32 0.34 0.15 0.22 0.25 0.31 0.35 0.40 0.42 0.18 0.26 0.30 0.37 0.42 0.47 0.51 0.21 0.30 0.35 0.43 0.49 0.55 0.59 0.24 0.35 0.40 0.49 0.57 0.63 0.68 0.31 0.43 0.50 0.61 0.71 0.79 0.85 0.37 0.52 0.60 0.73 0.85 0.95 1.02 0.49 0.69 0.80 0.98 1.13 1.26 1.36 0.61 0.87 1.00 1.22 1.41 1.58 1.70 0.92 1.30 1.50 1.84 2.12 2.37 2.54 4 4.5 6.7 7.4 8.9 10.4 11.9 12.6 6.7 9.7 11.1 13.4 15.6 17.8 18.6 8.9 12.6 14.9 17.8 20.8 23.8 25.2 11.1 16.3 18.6 23.0 26.0 29.7 31.2 13.4 19.3 22.3 27.5 31.2 34.9 37.9 15.6 22.3 26.0 31.9 36.4 40.8 43.8 17.8 26.0 29.7 36.4 42.3 46.8 50.5 23.0 31.9 37.1 45.3 52.7 58.7 63.1 27.5 38.6 44.6 54.2 63.1 70.5 75.7 36.4 51.2 59.4 72.8 83.9 93.6 101.0 45.3 64.6 74.3 90.6 104.7 117.3 126.2 68.3 96.5 111.4 136.6 157.4 176.0 188.6 5 3.6 5.3 5.9 7.1 8.3 9.5 10.1 5.3 7.7 8.9 10.7 12.5 14.3 14.9 7.1 10.1 11.9 14.3 16.6 19.0 20.2 8.9 13.1 14.9 18.4 20.8 23.8 24.9 10.7 15.4 17.8 22.0 24.9 27.9 30.3 12.5 17.8 20.8 25.5 29.1 32.7 35.0 14.3 20.8 23.8 29.1 33.9 37.4 40.4 18.4 25.5 29.7 36.2 42.2 46.9 50.5 22.0 30.9 35.6 43.4 50.5 56.4 60.6 29.1 41.0 47.5 58.2 67.1 74.8 80.8 36.2 51.7 59.4 72.5 83.8 93.9 101.0 54.6 77.2 89.1 109.3 125.9 140.8 150.9 6 3.0 4.5 5.0 5.9 6.9 7.9 8.4 4.5 6.4 7.4 8.9 10.4 11.9 12.4 5.9 8.4 9.9 11.9 13.9 15.8 16.8 7.4 10.9 12.4 15.3 17.3 19.8 20.8 8.9 12.9 14.9 18.3 20.8 23.3 25.2 10.4 14.9 17.3 21.3 24.3 27.2 29.2 11.9 17.3 19.8 24.3 28.2 31.2 33.7 15.3 21.3 24.8 30.2 35.1 39.1 42.1 18.3 25.7 29.7 36.1 42.1 47.0 50.5 24.3 34.2 39.6 48.5 55.9 62.4 67.3 30.2 43.1 49.5 60.4 69.8 78.2 84.2 45.5 64.4 74.3 91.1 104.9 117.3 125.7 7 2.5 3.8 4.2 5.1 5.9 6.8 7.2 3.8 5.5 6.4 7.6 8.9 10.2 10.6 5.1 7.2 8.5 10.2 11.9 13.6 14.4 6.4 9.3 10.6 13.2 14.9 17.0 17.8 7.6 11.0 12.7 15.7 17.8 19.9 21.6 8.9 12.7 14.9 18.2 20.8 23.3 25.0 10.2 14.9 17.0 20.8 24.2 26.7 28.9 13.2 18.2 21.2 25.9 30.1 33.5 36.1 15.7 22.1 25.5 31.0 36.1 40.3 43.3 20.8 29.3 33.9 41.6 47.9 53.5 57.7 25.9 36.9 42.4 51.8 59.8 67.0 72.1 39.0 55.2 63.6 78.1 89.9 100.6 107.8 Gallons per Acre 20-inch Nozzle Spacing MPH 8 10 12 2.2 3.3 3.7 4.5 5.2 5.9 6.3 3.3 4.8 5.6 6.7 7.8 8.9 9.3 4.5 6.3 7.4 8.9 10.4 11.9 12.6 5.6 8.2 9.3 11.5 13.0 14.9 15.6 6.7 9.7 11.1 13.7 15.6 17.4 18.9 7.8 11.1 13.0 16.0 18.2 20.4 21.9 8.9 13.0 14.9 18.2 21.2 23.4 25.2 11.5 16.0 18.6 22.6 26.4 29.3 31.6 13.7 19.3 22.3 27.1 31.6 35.3 37.9 18.2 25.6 29.7 36.4 42.0 46.8 50.5 22.6 32.3 37.1 45.3 52.3 58.7 63.1 34.2 48.3 55.7 68.3 78.7 88.0 94.3 1.8 2.7 3.0 3.6 4.2 4.8 5.0 2.7 3.9 4.5 5.3 6.2 7.1 7.4 3.6 5.0 5.9 7.1 8.3 9.5 10.1 4.5 6.5 7.4 9.2 10.4 11.9 12.5 5.3 7.7 8.9 11.0 12.5 14.0 15.1 6.2 8.9 10.4 12.8 14.6 16.3 17.5 7.1 10.4 11.9 14.6 16.9 18.7 20.2 9.2 12.8 14.9 18.1 21.1 23.5 25.2 11.0 15.4 17.8 21.7 25.2 28.2 30.3 14.6 20.5 23.8 29.1 33.6 37.4 40.4 18.1 25.8 29.7 36.2 41.9 46.9 50.5 27.3 38.6 44.6 54.6 63.0 70.4 75.4 204 1.5 2.2 2.5 3.0 3.5 4.0 4.2 2.2 3.2 3.7 4.5 5.2 5.9 6.2 3.0 4.2 5.0 5.9 6.9 7.9 8.4 3.7 5.4 6.2 7.7 8.7 9.9 10.4 4.5 6.4 7.4 9.2 10.4 11.6 12.6 5.2 7.4 8.7 10.6 12.1 13.6 14.6 5.9 8.7 9.9 12.1 14.1 15.6 16.8 7.7 10.6 12.4 15.1 17.6 19.6 21.0 9.2 12.9 14.9 18.1 21.0 23.5 25.2 12.1 17.1 19.8 24.3 28.0 31.2 33.7 15.1 21.5 24.8 30.2 34.9 39.1 42.1 22.8 32.2 37.1 45.5 52.5 58.7 62.9 GAL/1000 Ft 20-inch Nozzle Spacing MPH 3 4 2 14 1.3 1.9 2.1 2.5 3.0 3.4 3.6 1.9 2.8 3.2 3.8 4.5 5.1 5.3 2.5 3.6 4.2 5.1 5.9 6.8 7.2 3.2 4.7 5.3 6.6 7.4 8.5 8.9 3.8 5.5 6.4 7.8 8.9 10.0 10.8 4.5 6.4 7.4 9.1 10.4 11.7 12.5 5.1 7.4 8.5 10.4 12.1 13.4 14.4 6.6 9.1 10.6 12.9 15.1 16.8 18.0 7.8 11.0 12.7 15.5 18.0 20.2 21.6 10.4 14.6 17.0 20.8 24.0 26.7 28.9 12.9 18.5 21.2 25.9 29.9 33.5 36.1 19.5 27.6 31.8 39.0 45.0 50.3 53.9 16 1.1 1.7 1.9 2.2 2.6 3.0 3.2 1.7 2.4 2.8 3.3 3.9 4.5 4.6 2.2 3.2 3.7 4.5 5.2 5.9 6.3 2.8 4.1 4.6 5.8 6.5 7.4 7.8 3.3 4.8 5.6 6.9 7.8 8.7 9.5 3.9 5.6 6.5 8.0 9.1 10.2 11.0 4.5 6.5 7.4 9.1 10.6 11.7 12.6 5.8 8.0 9.3 11.3 13.2 14.7 15.8 6.9 9.7 11.1 13.6 15.8 17.6 18.9 9.1 12.8 14.9 18.2 21.0 23.4 25.2 11.3 16.1 18.6 22.6 26.2 29.3 31.6 17.1 24.1 27.8 34.2 39.4 44.0 47.1 18 1.0 1.5 1.7 2.0 2.3 2.6 2.8 1.5 2.1 2.5 3.0 3.5 4.0 4.1 2.0 2.8 3.3 4.0 4.6 5.3 5.6 2.5 3.6 4.1 5.1 5.8 6.6 6.9 3.0 4.3 5.0 6.1 6.9 7.8 8.4 3.5 5.0 5.8 7.1 8.1 9.1 9.7 4.0 5.8 6.6 8.1 9.4 10.4 11.2 5.1 7.1 8.3 10.1 11.7 13.0 14.0 6.1 8.6 9.9 12.0 14.0 15.7 16.8 8.1 11.4 13.2 16.2 18.6 20.8 22.4 10.1 14.4 16.5 20.1 23.3 26.1 28.1 15.2 21.5 24.8 30.4 35.0 39.1 41.9 20 0.9 1.3 1.5 1.8 2.1 2.4 2.5 1.3 1.9 2.2 2.7 3.1 3.6 3.7 1.8 2.5 3.0 3.6 4.2 4.8 5.0 2.2 3.3 3.7 4.6 5.2 5.9 6.2 2.7 3.9 4.5 5.5 6.2 7.0 7.6 3.1 4.5 5.2 6.4 7.3 8.2 8.8 3.6 5.2 5.9 7.3 8.5 9.4 10.1 4.6 6.4 7.4 9.1 10.5 11.7 12.6 5.5 7.7 8.9 10.8 12.6 14.1 15.1 7.3 10.2 11.9 14.6 16.8 18.7 20.2 9.1 12.9 14.9 18.1 20.9 23.5 25.2 13.7 19.3 22.3 27.3 31.5 35.2 37.7 2 0.20 0.31 0.34 0.41 0.48 0.55 0.58 0.31 0.44 0.51 0.61 0.72 0.82 0.85 0.41 0.58 0.68 0.82 0.95 1.09 1.16 0.51 0.75 0.85 1.06 1.19 1.36 1.43 0.61 0.89 1.02 1.26 1.43 1.60 1.74 0.72 1.02 1.19 1.47 1.67 1.88 2.01 0.82 1.19 1.36 1.67 1.94 2.15 2.32 1.06 1.47 1.71 2.08 2.42 2.69 2.90 1.26 1.77 2.05 2.49 2.90 3.24 3.48 1.67 2.35 2.73 3.34 3.85 4.30 4.64 2.08 2.97 3.41 4.16 4.81 5.39 5.80 3.14 4.43 5.12 6.27 7.23 8.08 8.66 0.14 0.20 0.23 0.27 0.32 0.36 0.39 0.20 0.30 0.34 0.41 0.48 0.55 0.57 0.27 0.39 0.45 0.55 0.64 0.73 0.77 0.34 0.50 0.57 0.70 0.80 0.91 0.95 0.41 0.59 0.68 0.84 0.95 1.07 1.16 0.48 0.68 0.80 0.98 1.11 1.25 1.34 0.55 0.80 0.91 1.11 1.30 1.43 1.55 0.70 0.98 1.14 1.39 1.61 1.80 1.93 0.84 1.18 1.36 1.66 1.93 2.16 2.32 1.11 1.57 1.82 2.23 2.57 2.86 3.09 1.39 1.98 2.27 2.77 3.21 3.59 3.86 2.09 2.96 3.41 4.18 4.82 5.39 5.77 0.10 0.15 0.17 0.20 0.24 0.27 0.29 0.15 0.22 0.26 0.31 0.36 0.41 0.43 0.20 0.29 0.34 0.41 0.48 0.55 0.58 0.26 0.38 0.43 0.53 0.60 0.68 0.72 0.31 0.44 0.51 0.63 0.72 0.80 0.87 0.36 0.51 0.60 0.73 0.84 0.94 1.01 0.41 0.60 0.68 0.84 0.97 1.07 1.16 0.53 0.73 0.85 1.04 1.21 1.35 1.45 0.63 0.89 1.02 1.24 1.45 1.62 1.74 0.84 1.18 1.36 1.67 1.93 2.15 2.32 1.04 1.48 1.71 2.08 2.40 2.69 2.90 1.57 2.22 2.56 3.14 3.61 4.04 4.33 5 0.08 0.12 0.14 0.16 0.19 0.22 0.23 0.12 0.18 0.20 0.25 0.29 0.33 0.34 0.16 0.23 0.27 0.33 0.38 0.44 0.46 0.20 0.30 0.34 0.42 0.48 0.55 0.57 0.25 0.35 0.41 0.50 0.57 0.64 0.70 0.29 0.41 0.48 0.59 0.67 0.75 0.80 0.33 0.48 0.55 0.67 0.78 0.86 0.93 0.42 0.59 0.68 0.83 0.97 1.08 1.16 0.50 0.71 0.82 1.00 1.16 1.30 1.39 0.67 0.94 1.09 1.34 1.54 1.72 1.86 0.83 1.19 1.36 1.66 1.92 2.16 2.32 1.25 1.77 2.05 2.51 2.89 3.23 3.46 Nozzle Size 08 10 15 20 30 40 50 60 Application Rate (GPA) 20 inch spacing Application Rate (GPA) 40 inch spacing Application Rate (GPA) 60 inch spacing MPH MPH MPH PSI GPM 5 6 8 10 12 14 16 5 6 8 10 12 14 16 5 6 8 10 12 14 16 20 0.57 34 28 21 17 14 12 11 17 14 11 8 7 6 5 11 9 7 6 5 4 4 30 0.69 41 34 26 20 17 15 13 20 17 13 10 9 7 6 14 11 9 7 6 5 4 40 0.80 48 40 30 24 20 17 15 24 20 15 12 10 8 7 16 13 10 8 7 6 5 50 0.89 53 44 33 26 22 19 17 26 22 17 13 11 9 8 18 15 11 9 7 6 6 60 0.98 58 49 36 29 24 21 18 29 24 18 15 12 10 9 19 16 12 10 8 7 6 70 1.06 63 52 39 31 26 22 20 31 26 20 16 13 11 10 21 17 13 10 9 7 7 80 1.13 67 56 42 34 28 24 21 34 28 21 17 14 12 10 22 19 14 11 9 8 7 20 0.71 42 35 26 21 18 15 13 21 18 13 11 9 8 7 14 12 9 7 6 5 4 30 0.87 52 43 32 26 22 18 16 26 22 16 13 11 9 8 17 14 11 9 7 6 5 40 1.00 59 50 37 30 25 21 19 30 25 19 15 12 11 9 20 17 12 10 8 7 6 50 1.12 67 55 42 33 28 24 21 33 28 21 17 14 12 10 22 18 14 11 9 8 7 60 1.22 72 60 45 36 30 26 23 36 30 23 18 15 13 11 24 20 15 12 10 9 8 70 1.32 78 65 49 39 33 28 25 39 33 25 20 16 14 12 26 22 16 13 11 9 8 80 1.41 84 70 52 42 35 30 26 42 35 26 21 17 15 13 28 23 17 14 12 10 9 20 1.06 63 52 39 31 26 22 20 31 26 20 16 13 11 10 21 17 13 10 9 7 7 8 30 1.30 77 64 48 39 32 28 24 39 32 24 19 16 14 12 26 21 16 13 11 9 40 1.50 89 74 56 45 37 32 28 45 37 28 22 19 16 14 30 25 19 15 12 11 9 50 1.68 100 83 62 50 42 36 31 50 42 31 25 21 18 16 33 28 21 17 14 12 10 60 1.84 109 91 68 55 46 39 34 55 46 34 27 23 20 17 36 30 23 18 15 13 11 70 2.0 119 99 74 59 50 42 37 59 50 37 30 25 21 19 40 33 25 20 17 14 12 80 2.1 125 104 78 62 52 45 39 62 52 39 31 26 22 19 42 35 26 21 17 15 13 20 1.41 84 70 52 42 35 30 26 42 35 26 21 17 15 13 28 23 17 14 12 10 9 30 1.73 103 86 64 51 43 37 32 51 43 32 26 21 18 16 34 29 21 17 14 12 11 40 2.0 119 99 74 59 50 42 37 59 50 37 30 25 21 19 40 33 25 20 17 14 12 50 2.2 131 109 82 65 54 47 41 65 54 41 33 27 23 20 44 36 27 22 18 16 14 60 2.4 143 119 89 71 59 51 45 71 59 45 36 30 25 22 48 40 30 24 20 17 15 70 2.6 154 129 97 77 64 55 48 77 64 48 39 32 28 24 51 43 32 26 21 18 16 80 2.8 166 139 104 83 69 59 52 83 69 52 42 35 30 26 55 46 35 28 23 20 17 20 2.1 125 104 78 62 52 45 39 62 52 39 31 26 22 19 42 35 26 21 17 15 13 30 2.6 154 129 97 77 64 55 48 77 64 48 39 32 28 24 51 43 32 26 21 18 16 40 3.0 178 149 111 89 74 64 56 89 74 56 45 37 32 28 59 50 37 30 25 21 19 50 3.4 202 168 126 101 84 72 63 101 84 63 50 42 36 32 67 56 42 34 28 24 21 60 3.7 220 183 137 110 92 78 69 110 92 69 55 46 39 34 73 61 46 37 31 26 23 70 4.0 238 198 149 119 99 85 74 119 99 74 59 50 42 37 79 66 50 40 33 28 25 80 4.2 249 208 156 125 104 89 78 125 104 78 62 52 45 39 83 69 52 42 35 30 26 20 2.8 166 139 104 83 69 59 52 83 69 52 42 35 30 26 55 46 35 28 23 20 17 30 3.5 208 173 130 104 87 74 65 104 87 65 52 43 37 32 69 58 43 35 29 25 22 40 4.0 238 198 149 119 99 85 74 119 99 74 59 50 42 37 79 66 50 40 33 28 25 50 4.5 267 223 167 134 111 95 84 134 111 84 67 56 48 42 89 74 56 45 37 32 28 60 4.9 291 243 182 146 121 104 91 146 121 91 73 61 52 45 97 81 61 49 40 35 30 70 5.3 315 262 197 157 131 112 98 157 131 98 79 66 56 49 105 87 66 52 44 37 33 80 5.7 339 282 212 169 141 121 106 169 141 106 85 71 60 53 113 94 71 56 47 40 35 20 3.5 208 173 130 104 87 74 65 104 87 65 52 43 37 32 69 58 43 35 29 25 22 30 4.3 255 213 160 128 106 91 80 128 106 80 64 53 46 40 85 71 53 43 35 30 27 40 5.0 297 248 186 149 124 106 93 149 124 93 74 62 53 46 99 83 62 50 41 35 31 50 5.6 333 277 208 166 139 119 104 166 139 104 83 69 59 52 111 92 69 55 46 40 35 60 6.1 362 302 226 181 151 129 113 181 151 113 91 75 65 57 121 101 75 60 50 43 38 70 6.6 392 327 245 196 163 140 123 196 163 123 98 82 70 61 131 109 82 65 54 47 41 80 7.1 422 351 264 211 176 151 132 211 176 132 105 88 75 66 141 117 88 70 59 50 44 20 4.2 249 208 156 125 104 89 78 125 104 78 62 52 45 39 83 69 52 42 35 30 26 30 5.2 309 257 193 154 129 110 97 154 129 97 77 64 55 48 103 86 64 51 43 37 32 40 6.0 356 297 223 178 149 127 111 178 149 111 89 74 64 56 119 99 74 59 50 42 37 50 6.7 398 332 249 199 166 142 124 199 166 124 99 83 71 62 133 111 83 66 55 47 41 60 7.3 434 361 271 217 181 155 136 217 181 136 108 90 77 68 145 120 90 72 60 52 45 70 7.9 469 391 293 235 196 168 147 235 196 147 117 98 84 73 156 130 98 78 65 56 49 80 8.5 505 421 316 252 210 180 158 252 210 158 126 105 90 79 168 140 105 84 70 60 53 205 TECHNICAL INFORMATION Hi-Flow Application Chart - 20”, 40” & 60” Spacing Broadcast and Turf Application Chart-15” Spacing Nozzle Size 01 015 02 025 03 035 04 05 06 08 10 15 Pressure (PSI) Flow Rate (GPM) 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 15 30 40 60 80 100 115 0.06 0.09 0.10 0.12 0.14 0.16 0.17 0.09 0.13 0.15 0.18 0.21 0.24 0.25 0.12 0.17 0.20 0.24 0.28 0.32 0.34 0.15 0.22 0.25 0.31 0.35 0.40 0.42 0.18 0.26 0.30 0.37 0.42 0.47 0.51 0.21 0.30 0.35 0.43 0.49 0.55 0.59 0.24 0.35 0.40 0.49 0.57 0.63 0.68 0.31 0.43 0.50 0.61 0.71 0.79 0.85 0.37 0.52 0.60 0.73 0.85 0.95 1.02 0.49 0.69 0.80 0.98 1.13 1.26 1.36 0.61 0.87 1.00 1.22 1.41 1.58 1.70 0.92 1.30 1.50 1.84 2.12 2.37 2.54 4 6.1 8.6 9.9 12.1 14.0 15.7 16.8 9.1 12.9 14.9 18.2 21.0 23.5 25.2 12.1 17.1 19.8 24.2 28.0 31.3 33.6 15.2 21.4 24.8 30.3 35.0 39.1 42.0 18.2 25.7 29.7 36.4 42.0 47.0 50.4 21.2 30.0 34.6 42.4 49.0 54.8 58.8 24.2 34.3 39.6 48.5 56.0 62.6 67.1 30.3 42.9 49.5 60.6 70.0 78.3 83.9 36.4 51.4 59.4 72.7 84.0 93.9 100.7 48.5 68.6 79.2 97.0 112.0 125.2 134.3 60.6 85.7 99.0 121.2 140.0 156.5 167.9 90.9 128.6 148.5 181.9 210.0 234.8 251.8 5 4.8 6.9 7.9 9.7 11.2 12.5 13.4 7.3 10.3 11.9 14.5 16.8 18.8 20.1 9.7 13.7 15.8 19.4 22.4 25.1 26.9 12.1 17.1 19.8 24.2 28.0 31.3 33.6 14.5 20.6 23.8 29.1 33.6 37.6 40.3 17.0 24.0 27.7 33.9 39.2 43.8 47.0 19.4 27.4 31.7 38.8 44.8 50.1 53.7 24.2 34.3 39.6 48.5 56.0 62.6 67.1 29.1 41.2 47.5 58.2 67.2 75.1 80.6 38.8 54.9 63.4 77.6 89.6 100.2 107.4 48.5 68.6 79.2 97.0 112.0 125.2 134.3 72.7 102.9 118.8 145.5 168.0 187.8 201.4 6 4.0 5.7 6.6 8.1 9.3 10.4 11.2 6.1 8.6 9.9 12.1 14.0 15.7 16.8 8.1 11.4 13.2 16.2 18.7 20.9 22.4 10.1 14.3 16.5 20.2 23.3 26.1 28.0 12.1 17.1 19.8 24.2 28.0 31.3 33.6 14.1 20.0 23.1 28.3 32.7 36.5 39.2 16.2 22.9 26.4 32.3 37.3 41.7 44.8 20.2 28.6 33.0 40.4 46.7 52.2 56.0 24.2 34.3 39.6 48.5 56.0 62.6 67.1 32.3 45.7 52.8 64.7 74.7 83.5 89.5 40.4 57.2 66.0 80.8 93.3 104.4 111.9 60.6 85.7 99.0 121.2 140.0 156.5 167.9 7 3.5 4.9 5.7 6.9 8.0 8.9 9.6 5.2 7.3 8.5 10.4 12.0 13.4 14.4 6.9 9.8 11.3 13.9 16.0 17.9 19.2 8.7 12.2 14.1 17.3 20.0 22.4 24.0 10.4 14.7 17.0 20.8 24.0 26.8 28.8 12.1 17.1 19.8 24.2 28.0 31.3 33.6 13.9 19.6 22.6 27.7 32.0 35.8 38.4 17.3 24.5 28.3 34.6 40.0 44.7 48.0 20.8 29.4 33.9 41.6 48.0 53.7 57.6 27.7 39.2 45.3 55.4 64.0 71.6 76.7 34.6 49.0 56.6 69.3 80.0 89.4 95.9 52.0 73.5 84.9 103.9 120.0 134.2 143.9 Gallons per Acre 15-inch Nozzle Spacing MPH 8 10 12 3.0 4.3 5.0 6.1 7.0 7.8 8.4 4.5 6.4 7.4 9.1 10.5 11.7 12.6 6.1 8.6 9.9 12.1 14.0 15.7 16.8 7.6 10.7 12.4 15.2 17.5 19.6 21.0 9.1 12.9 14.9 18.2 21.0 23.5 25.2 10.6 15.0 17.3 21.2 24.5 27.4 29.4 12.1 17.1 19.8 24.2 28.0 31.3 33.6 15.2 21.4 24.8 30.3 35.0 39.1 42.0 18.2 25.7 29.7 36.4 42.0 47.0 50.4 24.2 34.3 39.6 48.5 56.0 62.6 67.1 30.3 42.9 49.5 60.6 70.0 78.3 83.9 45.5 64.3 74.2 90.9 105.0 117.4 125.9 2.4 3.4 4.0 4.8 5.6 6.3 6.7 3.6 5.1 5.9 7.3 8.4 9.4 10.1 4.8 6.9 7.9 9.7 11.2 12.5 13.4 6.1 8.6 9.9 12.1 14.0 15.7 16.8 7.3 10.3 11.9 14.5 16.8 18.8 20.1 8.5 12.0 13.9 17.0 19.6 21.9 23.5 9.7 13.7 15.8 19.4 22.4 25.1 26.9 12.1 17.1 19.8 24.2 28.0 31.3 33.6 14.5 20.6 23.8 29.1 33.6 37.6 40.3 19.4 27.4 31.7 38.8 44.8 50.1 53.7 24.2 34.3 39.6 48.5 56.0 62.6 67.1 36.4 51.4 59.4 72.7 84.0 93.9 100.7 *Nozzles used on 30” spacing will provide half the GPA shown in this table. 206 2.0 2.9 3.3 4.0 4.7 5.2 5.6 3.0 4.3 5.0 6.1 7.0 7.8 8.4 4.0 5.7 6.6 8.1 9.3 10.4 11.2 5.1 7.1 8.3 10.1 11.7 13.0 14.0 6.1 8.6 9.9 12.1 14.0 15.7 16.8 7.1 10.0 11.6 14.1 16.3 18.3 19.6 8.1 11.4 13.2 16.2 18.7 20.9 22.4 10.1 14.3 16.5 20.2 23.3 26.1 28.0 12.1 17.1 19.8 24.2 28.0 31.3 33.6 16.2 22.9 26.4 32.3 37.3 41.7 44.8 20.2 28.6 33.0 40.4 46.7 52.2 56.0 30.3 42.9 49.5 60.6 70.0 78.3 83.9 GAL/1000Ft 15-inch Nozzle Spacing MPH 3 4 2 14 1.7 2.4 2.8 3.5 4.0 4.5 4.8 2.6 3.7 4.2 5.2 6.0 6.7 7.2 3.5 4.9 5.7 6.9 8.0 8.9 9.6 4.3 6.1 7.1 8.7 10.0 11.2 12.0 5.2 7.3 8.5 10.4 12.0 13.4 14.4 6.1 8.6 9.9 12.1 14.0 15.7 16.8 6.9 9.8 11.3 13.9 16.0 17.9 19.2 8.7 12.2 14.1 17.3 20.0 22.4 24.0 10.4 14.7 17.0 20.8 24.0 26.8 28.8 13.9 19.6 22.6 27.7 32.0 35.8 38.4 17.3 24.5 28.3 34.6 40.0 44.7 48.0 26.0 36.7 42.4 52.0 60.0 67.1 71.9 16 1.5 2.1 2.5 3.0 3.5 3.9 4.2 2.3 3.2 3.7 4.5 5.3 5.9 6.3 3.0 4.3 5.0 6.1 7.0 7.8 8.4 3.8 5.4 6.2 7.6 8.8 9.8 10.5 4.5 6.4 7.4 9.1 10.5 11.7 12.6 5.3 7.5 8.7 10.6 12.3 13.7 14.7 6.1 8.6 9.9 12.1 14.0 15.7 16.8 7.6 10.7 12.4 15.2 17.5 19.6 21.0 9.1 12.9 14.9 18.2 21.0 23.5 25.2 12.1 17.1 19.8 24.2 28.0 31.3 33.6 15.2 21.4 24.8 30.3 35.0 39.1 42.0 22.7 32.2 37.1 45.5 52.5 58.7 62.9 18 1.3 1.9 2.2 2.7 3.1 3.5 3.7 2.0 2.9 3.3 4.0 4.7 5.2 5.6 2.7 3.8 4.4 5.4 6.2 7.0 7.5 3.4 4.8 5.5 6.7 7.8 8.7 9.3 4.0 5.7 6.6 8.1 9.3 10.4 11.2 4.7 6.7 7.7 9.4 10.9 12.2 13.1 5.4 7.6 8.8 10.8 12.4 13.9 14.9 6.7 9.5 11.0 13.5 15.6 17.4 18.7 8.1 11.4 13.2 16.2 18.7 20.9 22.4 10.8 15.2 17.6 21.6 24.9 27.8 29.8 13.5 19.1 22.0 26.9 31.1 34.8 37.3 20.2 28.6 33.0 40.4 46.7 52.2 56.0 20 1.2 1.7 2.0 2.4 2.8 3.1 3.4 1.8 2.6 3.0 3.6 4.2 4.7 5.0 2.4 3.4 4.0 4.8 5.6 6.3 6.7 3.0 4.3 5.0 6.1 7.0 7.8 8.4 3.6 5.1 5.9 7.3 8.4 9.4 10.1 4.2 6.0 6.9 8.5 9.8 11.0 11.8 4.8 6.9 7.9 9.7 11.2 12.5 13.4 6.1 8.6 9.9 12.1 14.0 15.7 16.8 7.3 10.3 11.9 14.5 16.8 18.8 20.1 9.7 13.7 15.8 19.4 22.4 25.1 26.9 12.1 17.1 19.8 24.2 28.0 31.3 33.6 18.2 25.7 29.7 36.4 42.0 47.0 50.4 2 0.28 0.39 0.45 0.56 0.64 0.72 0.77 0.42 0.59 0.68 0.84 0.96 1.08 1.16 0.56 0.79 0.91 1.11 1.29 1.44 1.54 0.70 0.98 1.14 1.39 1.61 1.80 1.93 0.84 1.18 1.36 1.67 1.93 2.16 2.31 0.97 1.38 1.59 1.95 2.25 2.52 2.70 1.11 1.58 1.82 2.23 2.57 2.88 3.08 1.39 1.97 2.27 2.78 3.21 3.59 3.85 1.67 2.36 2.73 3.34 3.86 4.31 4.63 2.23 3.15 3.64 4.45 5.14 5.75 6.17 2.78 3.94 4.55 5.57 6.43 7.19 7.71 4.18 5.91 6.82 8.35 9.64 10.78 11.56 0.19 0.26 0.30 0.37 0.43 0.48 0.51 0.28 0.39 0.45 0.56 0.64 0.72 0.77 0.37 0.53 0.61 0.74 0.86 0.96 1.03 0.46 0.66 0.76 0.93 1.07 1.20 1.28 0.56 0.79 0.91 1.11 1.29 1.44 1.54 0.65 0.92 1.06 1.30 1.50 1.68 1.80 0.74 1.05 1.21 1.48 1.71 1.92 2.06 0.93 1.31 1.52 1.86 2.14 2.40 2.57 1.11 1.58 1.82 2.23 2.57 2.88 3.08 1.48 2.10 2.42 2.97 3.43 3.83 4.11 1.86 2.63 3.03 3.71 4.29 4.79 5.14 2.78 3.94 4.55 5.57 6.43 7.19 7.71 0.14 0.20 0.23 0.28 0.32 0.36 0.39 0.21 0.30 0.34 0.42 0.48 0.54 0.58 0.28 0.39 0.45 0.56 0.64 0.72 0.77 0.35 0.49 0.57 0.70 0.80 0.90 0.96 0.42 0.59 0.68 0.84 0.96 1.08 1.16 0.49 0.69 0.80 0.97 1.13 1.26 1.35 0.56 0.79 0.91 1.11 1.29 1.44 1.54 0.70 0.98 1.14 1.39 1.61 1.80 1.93 0.84 1.18 1.36 1.67 1.93 2.16 2.31 1.11 1.58 1.82 2.23 2.57 2.88 3.08 1.39 1.97 2.27 2.78 3.21 3.59 3.85 2.09 2.95 3.41 4.18 4.82 5.39 5.78 5 0.11 0.16 0.18 0.22 0.26 0.29 0.31 0.17 0.24 0.27 0.33 0.39 0.43 0.46 0.22 0.32 0.36 0.45 0.51 0.58 0.62 0.28 0.39 0.45 0.56 0.64 0.72 0.77 0.33 0.47 0.55 0.67 0.77 0.86 0.93 0.39 0.55 0.64 0.78 0.90 1.01 1.08 0.45 0.63 0.73 0.89 1.03 1.15 1.23 0.56 0.79 0.91 1.11 1.29 1.44 1.54 0.67 0.95 1.09 1.34 1.54 1.73 1.85 0.89 1.26 1.45 1.78 2.06 2.30 2.47 1.11 1.58 1.82 2.23 2.57 2.88 3.08 1.67 2.36 2.73 3.34 3.86 4.31 4.63 Nozzle Size 08 10 15 20 30 40 50 60 PSI Application Rate (GPA) 15 inch spacing GPM Application Rate (GPA) 30 inch spacing MPH Application Rate (GPA) 45 inch spacing MPH MPH 5 6 8 10 12 14 16 5 6 8 10 12 14 16 5 6 8 10 12 14 16 20 0.57 45 38 28 23 19 16 14 23 19 14 11 9 8 7 15 13 9 8 6 5 5 30 0.69 55 46 34 27 23 20 17 27 23 17 14 11 10 9 18 15 11 9 8 7 6 40 0.80 63 53 40 32 26 23 20 32 26 20 16 13 11 10 21 18 13 11 9 8 7 50 0.89 70 59 44 35 29 25 22 35 29 22 18 15 13 11 23 20 15 12 10 8 7 60 0.98 78 65 49 39 32 28 24 39 32 24 19 16 14 12 26 22 16 13 11 9 8 70 1.06 84 70 52 42 35 30 26 42 35 26 21 17 15 13 28 23 17 14 12 10 9 80 1.13 89 75 56 45 37 32 28 45 37 28 22 19 16 14 30 25 19 15 12 11 9 20 0.71 56 47 35 28 23 20 18 28 23 18 14 12 10 9 19 16 12 9 8 7 6 30 0.87 69 57 43 34 29 25 22 34 29 22 17 14 12 11 23 19 14 11 10 8 7 40 1.00 79 66 50 40 33 28 25 40 33 25 20 17 14 12 26 22 17 13 11 9 8 50 1.12 89 74 55 44 37 32 28 44 37 28 22 18 16 14 30 25 18 15 12 11 9 60 1.22 97 81 60 48 40 35 30 48 40 30 24 20 17 15 32 27 20 16 13 12 10 70 1.32 105 87 65 52 44 37 33 52 44 33 26 22 19 16 35 29 22 17 15 12 11 80 1.41 112 93 70 56 47 40 35 56 47 35 28 23 20 17 37 31 23 19 16 13 12 20 1.06 84 70 52 42 35 30 26 42 35 26 21 17 15 13 28 23 17 14 12 10 9 30 1.30 103 86 64 51 43 37 32 51 43 32 26 21 18 16 34 29 21 17 14 12 11 40 1.50 119 99 74 59 50 42 37 59 50 37 30 25 21 19 40 33 25 20 17 14 12 50 1.68 133 111 83 67 55 48 42 67 55 42 33 28 24 21 44 37 28 22 18 16 14 60 1.84 146 121 91 73 61 52 46 73 61 46 36 30 26 23 49 40 30 24 20 17 15 70 2.0 158 132 99 79 66 57 50 79 66 50 40 33 28 25 53 44 33 26 22 19 17 80 2.1 166 139 104 83 69 59 52 83 69 52 42 35 30 26 55 46 35 28 23 20 17 20 1.41 112 93 70 56 47 40 35 56 47 35 28 23 20 17 37 31 23 19 16 13 12 30 1.73 137 114 86 69 57 49 43 69 57 43 34 29 24 21 46 38 29 23 19 16 14 40 2.0 158 132 99 79 66 57 50 79 66 50 40 33 28 25 53 44 33 26 22 19 17 50 2.2 174 145 109 87 73 62 54 87 73 54 44 36 31 27 58 48 36 29 24 21 18 60 2.4 190 158 119 95 79 68 59 95 79 59 48 40 34 30 63 53 40 32 26 23 20 70 2.6 206 172 129 103 86 74 64 103 86 64 51 43 37 32 69 57 43 34 29 25 21 80 2.8 222 185 139 111 92 79 69 111 92 69 55 46 40 35 74 62 46 37 31 26 23 20 2.1 166 139 104 83 69 59 52 83 69 52 42 35 30 26 55 46 35 28 23 20 17 30 2.6 206 172 129 103 86 74 64 103 86 64 51 43 37 32 69 57 43 34 29 25 21 40 3.0 238 198 149 119 99 85 74 119 99 74 59 50 42 37 79 66 50 40 33 28 25 50 3.4 269 224 168 135 112 96 84 135 112 84 67 56 48 42 90 75 56 45 37 32 28 60 3.7 293 244 183 147 122 105 92 147 122 92 73 61 52 46 98 81 61 49 41 35 31 70 4.0 317 264 198 158 132 113 99 158 132 99 79 66 57 50 106 88 66 53 44 38 33 80 4.2 333 277 208 166 139 119 104 166 139 104 83 69 59 52 111 92 69 55 46 40 35 20 2.8 222 185 139 111 92 79 69 111 92 69 55 46 40 35 74 62 46 37 31 26 23 30 3.5 277 231 173 139 116 99 87 139 116 87 69 58 50 43 92 77 58 46 39 33 29 40 4.0 317 264 198 158 132 113 99 158 132 99 79 66 57 50 106 88 66 53 44 38 33 50 4.5 356 297 223 178 149 127 111 178 149 111 89 74 64 56 119 99 74 59 50 42 37 60 4.9 388 323 243 194 162 139 121 194 162 121 97 81 69 61 129 108 81 65 54 46 40 70 5.3 420 350 262 210 175 150 131 210 175 131 105 87 75 66 140 117 87 70 58 50 44 80 5.7 451 376 282 226 188 161 141 226 188 141 113 94 81 71 150 125 94 75 63 54 47 20 3.5 277 231 173 139 116 99 87 139 116 87 69 58 50 43 92 77 58 46 39 33 29 30 4.3 341 284 213 170 142 122 106 170 142 106 85 71 61 53 114 95 71 57 47 41 35 40 5.0 396 330 248 198 165 141 124 198 165 124 99 83 71 62 132 110 83 66 55 47 41 50 5.6 444 370 277 222 185 158 139 222 185 139 111 92 79 69 148 123 92 74 62 53 46 60 6.1 483 403 302 242 201 173 151 242 201 151 121 101 86 75 161 134 101 81 67 58 50 70 6.6 523 436 327 261 218 187 163 261 218 163 131 109 93 82 174 145 109 87 73 62 54 80 7.1 562 469 351 281 234 201 176 281 234 176 141 117 100 88 187 156 117 94 78 67 59 20 4.2 333 277 208 166 139 119 104 166 139 104 83 69 59 52 111 92 69 55 46 40 35 30 5.2 412 343 257 206 172 147 129 206 172 129 103 86 74 64 137 114 86 69 57 49 43 40 6.0 475 396 297 238 198 170 149 238 198 149 119 99 85 74 158 132 99 79 66 57 50 50 6.7 531 442 332 265 221 190 166 265 221 166 133 111 95 83 177 147 111 88 74 63 55 60 7.3 578 482 361 289 241 206 181 289 241 181 145 120 103 90 193 161 120 96 80 69 60 70 7.9 626 521 391 313 261 223 196 313 261 196 156 130 112 98 209 174 130 104 87 74 65 80 8.5 673 561 421 337 281 240 210 337 281 210 168 140 120 105 224 187 140 112 94 80 70 207 TECHNICAL INFORMATION Hi-Flow Application Chart - 15”, 30” & 45” Spacing Broadcast Application Chart-50 cm Spacing Nozzle Size 01 015 02 025 03 035 04 05 06 08 10 Pressure (BAR) 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Flow Rate (L/min) 0.23 0.33 0.40 0.46 0.52 0.57 0.61 0.65 0.35 0.49 0.60 0.69 0.77 0.85 0.92 0.98 0.46 0.65 0.80 0.92 1.03 1.13 1.22 1.31 0.58 0.82 1.00 1.15 1.29 1.41 1.53 1.63 0.69 0.98 1.20 1.39 1.55 1.70 1.83 1.96 0.81 1.14 1.40 1.62 1.81 1.98 2.14 2.29 0.92 1.31 1.60 1.85 2.07 2.26 2.44 2.61 1.15 1.63 2.00 2.31 2.58 2.83 3.06 3.27 1.39 1.96 2.40 2.77 3.10 3.39 3.67 3.92 1.85 2.61 3.20 3.70 4.13 4.53 4.89 5.23 2.31 3.27 4.00 4.62 5.16 5.66 6.11 6.53 6 46 66 80 92 104 114 122 130 70 98 120 138 154 170 184 196 92 130 160 184 206 226 244 262 116 164 200 230 258 282 306 326 138 196 240 278 310 340 366 392 162 228 280 324 362 396 428 458 184 262 320 370 414 452 488 522 230 326 400 462 516 566 612 654 278 392 480 554 620 678 734 784 370 522 640 740 826 906 978 1046 462 654 800 924 1032 1132 1222 1306 8 35 50 60 69 78 86 92 98 53 74 90 104 116 128 138 147 69 98 120 138 155 170 183 197 87 123 150 173 194 212 230 245 104 147 180 209 233 255 275 294 122 171 210 243 272 297 321 344 138 197 240 278 311 339 366 392 173 245 300 347 387 425 459 491 209 294 360 416 465 509 551 588 278 392 480 555 620 680 734 785 347 491 600 693 774 849 917 980 10 28 40 48 55 62 68 73 78 42 59 72 83 92 102 110 118 55 78 96 110 124 136 146 157 70 98 120 138 155 169 184 196 83 118 144 167 186 204 220 235 97 137 168 194 217 238 257 275 110 157 192 222 248 271 293 313 138 196 240 277 310 340 367 392 167 235 288 332 372 407 440 470 222 313 384 444 496 544 587 628 277 392 480 554 619 679 733 784 L/ha 50cm Nozzle Spacing km/H 12 14 16 18 23 33 40 46 52 57 61 65 35 49 60 69 77 85 92 98 46 65 80 92 103 113 122 131 58 82 100 115 129 141 153 163 69 98 120 139 155 170 183 196 81 114 140 162 181 198 214 229 92 131 160 185 207 226 244 261 115 163 200 231 258 283 306 327 139 196 240 277 310 339 367 392 185 261 320 370 413 453 489 523 231 327 400 462 516 566 611 653 20 28 34 39 45 49 52 56 30 42 51 59 66 73 79 84 39 56 69 79 88 97 105 112 50 70 86 99 111 121 131 140 59 84 103 119 133 146 157 168 69 98 120 139 155 170 183 196 79 112 137 159 177 194 209 224 99 140 171 198 221 243 262 280 119 168 206 237 266 291 315 336 159 224 274 317 354 388 419 448 198 280 343 396 442 485 524 560 17 25 30 35 39 43 46 49 26 37 45 52 58 64 69 74 35 49 60 69 77 85 92 98 44 62 75 86 97 106 115 122 52 74 90 104 116 128 137 147 61 86 105 122 136 149 161 172 69 98 120 139 155 170 183 196 86 122 150 173 194 212 230 245 104 147 180 208 233 254 275 294 139 196 240 278 310 340 367 392 173 245 300 347 387 425 458 490 208 15 22 27 31 35 38 41 43 23 33 40 46 51 57 61 65 31 43 53 61 69 75 81 87 39 55 67 77 86 94 102 109 46 65 80 93 103 113 122 131 54 76 93 108 121 132 143 153 61 87 107 123 138 151 163 174 77 109 133 154 172 189 204 218 93 131 160 185 207 226 245 261 123 174 213 247 275 302 326 349 154 218 267 308 344 377 407 435 20 14 20 24 28 31 34 37 39 21 29 36 41 46 51 55 59 28 39 48 55 62 68 73 79 35 49 60 69 77 85 92 98 41 59 72 83 93 102 110 118 49 68 84 97 109 119 128 137 55 79 96 111 124 136 146 157 69 98 120 139 155 170 184 196 83 118 144 166 186 203 220 235 111 157 192 222 248 272 293 314 139 196 240 277 310 340 367 392 25 11 16 19 22 25 27 29 31 17 24 29 33 37 41 44 47 22 31 38 44 49 54 59 63 28 39 48 55 62 68 73 78 33 47 58 67 74 82 88 94 39 55 67 78 87 95 103 110 44 63 77 89 99 108 117 125 55 78 96 111 124 136 147 157 67 94 115 133 149 163 176 188 89 125 154 178 198 217 235 251 111 157 192 222 248 272 293 313 30 9 13 16 18 21 23 24 26 14 20 24 28 31 34 37 39 18 26 32 37 41 45 49 52 23 33 40 46 52 56 61 65 28 39 48 56 62 68 73 78 32 46 56 65 72 79 86 92 37 52 64 74 83 90 98 104 46 65 80 92 103 113 122 131 56 78 96 111 124 136 147 157 74 104 128 148 165 181 196 209 92 131 160 185 206 226 244 261 Rates for Nozzle sizes 15, 20, 30, 40, 50 and 60 are available: contact Tech Services at 800-445-8360. Nozzle BAR Size 08 10 15 20 30 40 50 60 Application Rate (L/ha) 50 cm spacing LPM Application Rate (L/ha) 100 cm spacing KPH Application Rate (L/ha) 150 cm spacing KPH KPH 7 8 10 12 15 20 25 30 7 8 10 12 15 20 25 30 7 8 10 12 15 20 25 30 1.5 2.26 387 339 271 226 181 136 108 90 194 170 136 113 90 68 54 45 129 113 90 75 60 45 36 30 2.0 2.61 447 392 313 261 209 157 125 104 224 196 157 131 104 78 63 52 149 131 104 87 70 52 42 35 2.5 2.92 501 438 350 292 234 175 140 117 250 219 175 146 117 88 70 58 167 146 117 97 78 58 47 39 3.0 3.20 549 480 384 320 256 192 154 128 274 240 192 160 128 96 77 64 183 160 128 107 85 64 51 43 4.0 3.70 634 555 444 370 296 222 178 148 317 278 222 185 148 111 89 74 211 185 148 123 99 74 59 49 5.0 4.00 686 600 480 400 320 240 192 160 343 300 240 200 160 120 96 80 229 200 160 133 107 80 64 53 6.0 4.53 777 680 544 453 362 272 217 181 388 340 272 227 181 136 109 91 259 227 181 151 121 91 72 60 1.5 2.80 480 420 336 280 224 168 134 112 240 210 168 140 112 84 67 56 160 140 112 93 75 56 45 37 2.0 3.30 566 495 396 330 264 198 158 132 283 248 198 165 132 99 79 66 189 165 132 110 88 66 53 44 2.5 3.70 634 555 444 370 296 222 178 148 317 278 222 185 148 111 89 74 211 185 148 123 99 74 59 49 3.0 4.00 686 600 480 400 320 240 192 160 343 300 240 200 160 120 96 80 229 200 160 133 107 80 64 53 4.0 4.60 789 690 552 460 368 276 221 184 394 345 276 230 184 138 110 92 263 230 184 153 123 92 74 61 5.0 5.20 891 780 624 520 416 312 250 208 446 390 312 260 208 156 125 104 297 260 208 173 139 104 83 69 6.0 5.70 977 855 684 570 456 342 274 228 489 428 342 285 228 171 137 114 326 285 228 190 152 114 91 76 1.5 4.20 720 630 504 420 336 252 202 168 360 315 252 210 168 126 101 84 240 210 168 140 112 84 67 56 2.0 4.90 840 735 588 490 392 294 235 196 420 368 294 245 196 147 118 98 280 245 196 163 131 98 78 65 2.5 5.50 943 825 660 550 440 330 264 220 471 413 330 275 220 165 132 110 314 275 220 183 147 110 88 73 3.0 6.00 1029 900 720 600 480 360 288 240 514 450 360 300 240 180 144 120 343 300 240 200 160 120 96 80 4.0 6.90 1183 1035 828 690 552 414 331 276 591 518 414 345 276 207 166 138 394 345 276 230 184 138 110 92 5.0 7.7 1320 1155 924 770 616 462 370 308 660 578 462 385 308 231 185 154 440 385 308 257 205 154 123 103 6.0 8.5 1457 1275 1020 850 680 510 408 340 729 638 510 425 340 255 204 170 486 425 340 283 227 170 136 113 1.5 5.70 977 855 684 570 456 342 274 228 489 428 342 285 228 171 137 114 326 285 228 190 152 114 91 76 2.0 6.50 1114 975 780 650 520 390 312 260 557 488 390 325 260 195 156 130 371 325 260 217 173 130 104 87 2.5 7.3 1251 1095 876 730 584 438 350 292 626 548 438 365 292 219 175 146 417 365 292 243 195 146 117 97 3.0 8.0 1371 1200 960 800 640 480 384 320 686 600 480 400 320 240 192 160 457 400 320 267 213 160 128 107 4.0 9.2 1577 1380 1104 920 736 552 442 368 789 690 552 460 368 276 221 184 526 460 368 307 245 184 147 123 5.0 10.3 1766 1545 1236 1030 824 618 494 412 883 773 618 515 412 309 247 206 589 515 412 343 275 206 165 137 6.0 11.3 1937 1695 1356 1130 904 678 542 452 969 848 678 565 452 339 271 226 646 565 452 377 301 226 181 151 1.5 8.5 1457 1275 1020 850 680 510 408 340 729 638 510 425 340 255 204 170 486 425 340 283 227 170 136 113 2.0 9.8 1680 1470 1176 980 784 588 470 392 840 735 588 490 392 294 235 196 560 490 392 327 261 196 157 131 2.5 11.0 1886 1650 1320 1100 880 660 528 440 943 825 660 550 440 330 264 220 629 550 440 367 293 220 176 147 3.0 12.0 2057 1800 1440 1200 960 720 576 480 1029 900 720 600 480 360 288 240 686 600 480 400 320 240 192 160 4.0 13.9 2383 2085 1668 1390 1112 834 667 556 1191 1043 834 695 556 417 334 278 794 695 556 463 371 278 222 185 5.0 15.5 2657 2325 1860 1550 1240 930 744 620 1329 1163 930 775 620 465 372 310 886 775 620 517 413 310 248 207 6.0 17.0 2914 2550 2040 1700 1360 1020 816 680 1457 1275 1020 850 680 510 408 340 971 850 680 567 453 340 272 227 1.5 11.3 1937 1695 1356 1130 904 678 542 452 969 848 678 565 452 339 271 226 646 565 452 377 301 226 181 151 2.0 13.1 2246 1965 1572 1310 1048 786 629 524 1123 983 786 655 524 393 314 262 749 655 524 437 349 262 210 175 2.5 14.6 2503 2190 1752 1460 1168 876 701 584 1251 1095 876 730 584 438 350 292 834 730 584 487 389 292 234 195 3.0 16.0 2743 2400 1920 1600 1280 960 768 640 1371 1200 960 800 640 480 384 320 914 800 640 533 427 320 256 213 4.0 18.5 3171 2775 2220 1850 1480 1110 888 740 1586 1388 1110 925 740 555 444 370 1057 925 740 617 493 370 296 247 5.0 20.7 3549 3105 2484 2070 1656 1242 994 828 1774 1553 1242 1035 828 621 497 414 1183 1035 828 690 552 414 331 276 6.0 22.6 3874 3390 2712 2260 1808 1356 1085 904 1937 1695 1356 1130 904 678 542 452 1291 1130 904 753 603 452 362 301 1.5 14.1 2417 2115 1692 1410 1128 846 677 564 1209 1058 846 705 564 423 338 282 806 705 564 470 376 282 226 188 2.0 16.3 2794 2445 1956 1630 1304 978 782 652 1397 1223 978 815 652 489 391 326 931 815 652 543 435 326 261 217 2.5 18.3 3137 2745 2196 1830 1464 1098 878 732 1569 1373 1098 915 732 549 439 366 1046 915 732 610 488 366 293 244 3.0 20.0 3429 3000 2400 2000 1600 1200 960 800 1714 1500 1200 1000 800 600 480 400 1143 1000 800 667 533 400 320 267 4.0 23.1 3960 3465 2772 2310 1848 1386 1109 924 1980 1733 1386 1155 924 693 554 462 1320 1155 924 770 616 462 370 308 5.0 25.8 4423 3870 3096 2580 2064 1548 1238 1032 2211 1935 1548 1290 1032 774 619 516 1474 1290 1032 860 688 516 413 344 6.0 28.3 4851 4245 3396 2830 2264 1698 1358 1132 2426 2123 1698 1415 1132 849 679 566 1617 1415 1132 943 755 566 453 377 1.5 17.0 2914 2550 2040 1700 1360 1020 816 680 1457 1275 1020 850 680 510 408 340 971 850 680 567 453 340 272 227 2.0 19.6 3360 2940 2352 1960 1568 1176 941 784 1680 1470 1176 980 784 588 470 392 1120 980 784 653 523 392 314 261 2.5 21.9 3754 3285 2628 2190 1752 1314 1051 876 1877 1643 1314 1095 876 657 526 438 1251 1095 876 730 584 438 350 292 3.0 24.0 4114 3600 2880 2400 1920 1440 1152 960 2057 1800 1440 1200 960 720 576 480 1371 1200 960 800 640 480 384 320 4.0 27.7 4749 4155 3324 2770 2216 1662 1330 1108 2374 2078 1662 1385 1108 831 665 554 1583 1385 1108 923 739 554 443 369 5.0 31.0 5314 4650 3720 3100 2480 1860 1488 1240 2657 2325 1860 1550 1240 930 744 620 1771 1550 1240 1033 827 620 496 413 6.0 33.9 5811 5085 4068 3390 2712 2034 1627 1356 2906 2543 2034 1695 1356 1017 814 678 1937 1695 1356 1130 904 678 542 452 209 TECHNICAL INFORMATION Hi-Flow Application Chart - 50cm, 100cm & 150cm Spacing Spacing, Height, & Conversion Tables Suggested Minimum Broadcast Spray Heights (Flat Fan Spray Nozzles) Optimum Broadcast Spray Heights (Flat Fan Spray Nozzles) * Not Recommended ** 40” nozzle spacing is prone to off-target trespass under certain conditions that affect drift. Nozzle Spacing If your nozzle spacing differs from the spacing used in spray nozzle application rate tables, multiply the tabulated GPA by the conversion factor to find your actual application rate. Example: If your nozzle spacing is actually 36-inches (90cm), your application rate will be 0.56 times what is shown in tables for nozzles spaced 20-inches (50cm). To calculate a conversion factor for spacing not listed below, use the following formula: Standard Conversion Factor = Nozzle Spacing in Table (inches) Your Nozzle Spacing (inches) Metric Conversion Factor = Nozzle Spacing in Table (cm) Your Nozzle Spacing (cm) Standard U.S. Your Spacing 8 in 10 in 12 in 14 in 15 in 16 in 18 in 20 in 22 in 24 in 26 in 28 in 30 in 32 in 34 in 36 in 38 in 40 in 42 in 44 in 48 in Metric Conversion from Charts 20 in 30 in 40 in 2.50 2.00 1.67 1.43 1.33 1.25 1.11 1.00 0.91 0.83 0.77 0.71 0.67 0.63 0.59 0.56 0.53 0.50 0.48 0.45 0.42 3.75 3.00 2.50 2.14 2.00 1.88 1.67 1.50 1.36 1.25 1.15 1.07 1.00 0.94 0.88 0.83 0.79 0.75 0.71 0.68 0.63 Your Spacing 10 cm 15 cm 20 cm 25 cm 30 cm 33 cm 40 cm 45 cm 50 cm 55 cm 60 cm 65 cm 70 cm 75 cm 80 cm 85 cm 90 cm 95 cm 100 cm 110 cm 120 cm 5.00 4.00 3.33 2.86 2.67 2.50 2.22 2.00 1.82 1.67 1.54 1.43 1.33 1.25 1.18 1.11 1.05 1.00 0.95 0.91 0.83 210 Conversion from Charts 50 cm 75 cm 100 cm 5.00 3.33 2.50 2.00 1.67 1.52 1.25 1.11 1.00 0.91 0.83 0.77 0.71 0.67 0.63 0.59 0.56 0.53 0.50 0.45 0.42 7.50 5.00 3.75 3.00 2.50 2.27 1.88 1.67 1.50 1.36 1.25 1.15 1.07 1.00 0.94 0.88 0.83 0.79 0.75 0.68 0.63 10.00 6.67 5.00 4.00 3.33 3.03 2.50 2.22 2.00 1.82 1.67 1.54 1.43 1.33 1.25 1.18 1.11 1.05 1.00 0.91 0.83 Liquids that are more dense than water will flow through a spray nozzle more slowly than water. Solutions that are less dense than water will flow through a spray nozzle more quickly than water. Unless otherwise indicated, the performance tables in the spray nozzle section of this catalog show flow and application rates for water-based sprays. To use those tables when selecting nozzles to apply non-water sprays you must calculate an intermediate "look-up" application rate. To do this you will multiply your actual desired application rate by a conversion factor and then use the resulting "look-up" figure to select a nozzle from the water-based performance tables. The conversion factors listed on this page are based on typical values for common fertilizer solutions. For other spray solutions, you can calculate the conversion factor by taking the square root of the solution's specific gravity. For easier nozzle selection using water and non-water sprays, use the SprayIT calculator online at: http://SprayIT.hypropumps.com. U.S. Units Density (lb/us gal) 7.00 8.00 8.34 9.00 10.00 10.30 10.65 11.00 11.05 11.20 11.65 12.00 Material water 4-10-10 28-0-0 32-0-0 7-21-7 10-34-0 Specific Gravity 0.84 0.96 1.00 1.08 1.20 1.24 1.28 1.32 1.32 1.34 1.40 1.44 Conversion Factor 0.92 0.98 1.00 1.04 1.10 1.11 1.13 1.15 1.15 1.16 1.18 1.20 Metric Density (kg/L) 0.80 0.90 1.00 1.10 1.20 1.24 1.28 1.30 1.32 1.34 1.40 1.50 Material water 4-10-10 28-0-0 32-0-0 7-21-7 10-34-0 Conversion Factor 0.89 0.95 1.00 1.05 1.10 1.11 1.13 1.14 1.15 1.16 1.18 1.22 Example: Your desired application rate of 28% Nitrogen fertilizer (28-0-0) is 30 US GPA. Multiply 30 GPA by Conversion Factor 1.13 to find the converted look-up application rate of 33.9 GPA. Select a spray nozzle that will apply 33.9 GPA of water-based spray. A spray nozzle that will apply 33.9 GPA of water will apply 30 GPA of 28-0-0 fertilizer solution. Example: Your desired application rate of 28% Nitrogen fertilizer (28-0-0) is 300 L/ha. Multiply 300 L/ha X Conversion Factor 1.13 to find the converted look-up application rate of 339 L/ha. Select a spray nozzle that will apply 339 L/ha of water-based spray. A spray nozzle that will apply 339 L/ha of water will apply 300 L/ha of 28-0-0 fertilizer solution. Broadcast Application Formulas US Standard GPA x MPH x W GPM = Application Formulas – US Standard 5,940 GPM – Gallons per minute (per spray nozzle) GPA – Gallons per acre GAL/1000FT2 x MPH x W GPM = 2 GAL/1000FT – Gallons per 1000 square feet 136 MPH – Miles per hour W - Nozzle spacing (inches) for broadcast spraying 5,940 x GPM GPA = - Spray width (inches) for single-nozzle band MPH x W spraying or boomless spraying - Row spacing (inches) divided by the number of 136 x GPM GAL/1000FT2 = nozzles per row for directed spraying MPH x W Metric Application Formulas – Metric L/ha x Kmph x W LPM = LPM – Litres per minute (per spray nozzle) 600 L/ha – Litres per hectare Kmph – Kilometres per hour W - Nozzle spacing (m) for broadcast spraying 600 x LPM L/ha = - Spray width (m) for single-nozzle band spraying Kmph x W or boomless spraying - Row spacing (m) divided by the number of nozzles per row for directed spraying 211 TECHNICAL INFORMATION Spraying Solutions other than Water Band Spraying Application Formulas US Standard Volume of Chemical Solution = Required in Gallons Band Width (inches) [Band Width + Spacing between Bands] (inches) (inches) Height Requirement – Band Spraying Band Width 8" Height over Target 80° 5" Height over Target 110° 3" 10" 6" 4" 12" 7" 4" 15" 9" 5" 18" 11" 6" 20" 12" 7" 30" 18" 11" 8" 10" 12" 20" 0.350 0.400 0.500 22" 0.318 0.363 0.454 30" 0.233 0.266 36" 0.194 40" 48" Field Area (Acres) X 5940 x GPM x N MPH x W Band GPA = GPM needed per Nozzle: GPA x MPH x W 5940 x N GPM = GPA = Gallons per acre GPM = Gallons per minute MPH = Speed in miles per hour W = Band width in inches N = Number of nozzles spraying each band Band Width 7" Label Rate of Carrier (GPA) To find GPA in the band, use the following equation: Treated Area Per Field For Banding Applications Row Spacing in Inches X 15" 20" 24" 0.600 0.75 1.000 0.545 0.681 0.909 0.333 0.400 0.500 0.666 0.800 0.222 0.278 0.333 0.416 0.555 0.666 0.175 0.200 0.250 0.300 0.375 0.500 0.600 0.145 0.166 0.208 0.250 0.321 0.417 0.500 Metric Volume of Chemical Solution = Required in Litres Band Width (m) Band Width + Spacing between Bands] (m) (m) Height Requirement – Band Spraying X Field Area (ha) To find the L/ha in the band, use the following equation: Band Width 20 cm Height over Target 80° 12 cm Height over Target 110° 7 cm 25 cm 15 cm 9 cm 30 cm 18 cm 11 cm 40 cm 24 cm 14 cm 45 cm 27 cm 16 cm 50 cm 30 cm 18 cm 75 cm 45 cm 26 cm Band L/ha = 18 cm 20 cm Band Width 25 cm 30 cm 38 cm 50 cm 60 cm 50 cm 0.360 0.400 0.500 0.600 0.760 1.000 60 cm 0.300 0.333 0.417 0.500 0.633 0.833 1.000 75 cm 0.240 0.267 0.333 0.400 0.507 0.667 0.800 90 cm 0.200 0.222 0.278 0.333 0.422 0.556 0.667 100 cm 0.180 0.200 0.250 0.300 0.380 0.500 0.600 120 cm 0.150 0.167 0.208 0.250 0.317 0.417 0.500 600 x LPM x N Kmph x W LPM needed per Nozzle: LPM = Treated Area Per Field For Banding Applications Row Spacing in cm Label Rate X of Carrier (L/ha) L/ha x Kmph x W 600 x N L/ha = Litres per hectare LPM = Litres per minute Kmph = Speed in kilometres per hour W = Band width in metres N = Number of nozzles spraying each band 212 Ceramic – Highly resistant to abrasive and corrosive chemistry and provides superior wear resistance in abrasive applications and high pressures. Albuz nozzle orifices are made of pink inserted ceramic, reinforced by special oxides, and specially designed by Saint-Gobain for spraying applications. Polyacetal – Provides good resistance to most chemicals and superior wear resistance to most agricultural chemistry. Susceptible to strong mineral acids and a few organic solvents. Resistance to most alkalis is excellent. Organic solvents usually cause slight swelling without any other harmful effect.* Polyvinylidene Fluoride (PVDF) – Should be used with acid-based agricultural defoliation chemistry. Good resistance to wear.* Resists many reagents and high temperatures (up to 300°F). Susceptible to high temperatures above water boiling (210°F) in combination with concentrated sulfuric and nitric acids. Preferred in industrial spraying applications. Stainless Steel – Good resistance to chemicals and provides average wear resistance. Brass – Average resistance to most chemistry and poor wear resistance. Susceptible to corrosion, especially with fertilizers. Hypro’s Technical/Application Department is available to answer chemical compatibility issues and assist in choosing the correct spray nozzle for your application. Call 1-800-445-8360 (US) or +44 1954 260097 (Europe). * A list of resistant reagents, acids and alkaline is available from the Hypro Technical/Application Department. Comparative Accelerated Wear Test % Increase in Flow Brass 26% (worst) Stainless Steel 15% (fair) PVDF 12% (good) Polyacetal 8% (better) Ceramic 5% (best) Source: SGS UK LTD. Saint-Gobain AC France Test Medium: 2.5% Kaolin in water Test Pressure: 40 psi Time (Hours) Temperature Tolerance Nozzle Material Maximum Temperature PVC 58° C 136º F Polyacetal 85° C 185º F PVDF 150° C 302º F Brass 234° C 453º F Stainless Steel 430° C 806º F 213 TECHNICAL INFORMATION Wear and Chemical Compatibility Spray Nozzle Maintenance and Information Guide Spraying with a worn nozzle will have consequences for precision. Firstly, droplet size will be larger risking compromised spray coverage and uneven spray across the boom. If the sprayer is not fitted with a rate controller it will also mean uneven over application, this can be costly. Examples: Just 10% increase in flow from worn nozzles represent a loss of $2,000 to $10,000 on a twice-sprayed 1,000 acre farm (based on $10-$50/acre chemical cost). or A 10% increase in flow rate would cost as much as €15/ha in on the average high yielding wheat crop, a loss of over €6,000 on a 400 hectare farm. The good news is, monitoring and maintaining nozzle performance is one of the easiest ways to help keep a sprayer operating accurately and efficiently. 1. As a rule, replace nozzles worn (10% or more) or damaged at the beginning of each spraying season. 2. Only use the nozzle type that is recommended for your particular spraying application. 3. Calibrate your sprayer regularly to compensate for normal nozzle wear. 4. Monitor spray performance to catch worn, damaged, or plugged nozzles. Hypro spray nozzles are precision-engineered components that should be regularly maintained to ensure that they give trouble-free service. To clear blocked nozzles, soak in water and clean with a brush and airline. For stubborn deposits, soak in warm water and detergent, agitating occasionally. Never blow through a nozzle or poke with wires or pins – damage to the orifice will alter flow rate, spray angle, and spray distribution. Factors Affecting Spray Nozzle Performance The information in the chart below applies to most spray applications. However, because there are so many different types and sizes of spray nozzles, the effects may vary in a specific application. Hypro is glad to assist you with any specific application questions. Increase In Capacity (Flow Rate) Spray Angle Droplet Size Pattern Quality Wear Impact Velocity Operating Pressure Increases Increases then Decreases Decreases Improves Increases Increases Increases Specific Gravity Decreases Negligible Negligible Negligible Negligible Decreases Decreases • Full cone and hollow cone increases, flat fan spray decreases • • Depends on fluid being sprayed and spray nozzle used 214 Viscosity • Decreases Increases Deteriorates Decreases Decreases Decreases Fluid Temperature •• Increases Decreases Improves Increases Increases Increases Surface Tension No Effect Decreases Increases Negligible –– Negligible Negligible Accessories ProStop-E and Fence Row Control ......................................................... Page 216 Express Boom Assembly ........................................................................ Page 218 Duo React................................................................................................ Page 220 ProFlo Nozzle Bodies and Accessories .................................................. Page 221 ProCap™ Tank Lids and Tank Accessories .............................................. Page 229 Cleanload™ Chemical Eductor................................................................. Page 234 Line Strainers ........................................................................................ Page 236 Spray Guns............................................................................................. Page 238 Flowmeters ............................................................................................ Page 243 Sprayer Control Valves........................................................................... Page 244 Ball Valves.............................................................................................. Page 248 Gauges ................................................................................................... Page 249 Universal Flange Clamps, Gaskets and Fittings...................................... Page 252 Fittings, Cable Ties, Hose Clamps & Sealant.......................................... Page 254 215 ProStop-E Individual Nozzle Control for Precision Agriculture • Control spray activation directly on Hypro ProFlo nozzle bodies • Instantaneous on-off control with 12 volt actuation eliminates misapplication and waste • Eliminates the need for centralized valve banks allowing on/off control at the nozzle body for individual or small section control • Two actuation mode options: - Simple, 3-wire, 12 volt on/off actuation - Operate as an individually addressed valve on a CAN bus/ISO bus system • Robust, quarter-turn electric ball valves are highly reliable as compared to solenoid and plunger valves • Innovative locking collar mechanism allows for easy adjustments to valve orientation on the nozzle body • Extremely low continuous power consumption • High flow capacity in a compact valve design ProStop-E Valve Part Number Qty Description 3305-0011 1 ProStop-E valve assembly fits all Hypro ProFlo nozzle bodies in place of the check valve. 4213-0504V 36 PK-4223N-B524PSE 1 5-way ProFlo nozzle body with ProStop-E valve pre-assembled ProStop-E Valve easily adapts directly to ProFlo single drop, 3-way/5-way and push-to-connect nozzle bodies in place of the traditional check valve. Valve and nozzle body must be ordered separately. Part # 4213-0504V Order valve and nozzle body separately to create these or other configurations for testing/ development purposes. ProStop-E Cordsets Part Number Description 2520-0209 2520-0210 2520-0211 2300-0067 2520-0213 2520-0214 2520-0215 25" overmolded cordset with ultralock right angle connectors 25" overmolded cordset with threaded plastic right angle M12 connectors – Left Boom* 25" overmolded cordset with threaded plastic right angle M12 connectors – Right Boom* Termination Plug 1 meter, threaded ends 2 meter, threaded ends 3 meter, threaded ends Black-in; Grey-out, Other custom length cord sets available upon request. * Left and right boom are defined as the operator is sitting in the driver’s seat of the equipment. In In In Out 2520-0209 2520-0210 Left Boom 216 Out Out 2520-0211 Right Boom 2300-0067 Features & Benefits of Control Box: • Control one or two Hypro ProStop-E valves with easy on-off switch • Allows for retrofit of sprayers for adding fence/end row control • Simple M12 wiring to battery and valves for plug and play • Easy to mount bracket provided • Cable options for up to 120” boom length • LED light indicator on each switch Control Box Description Connection Amp Rating 2850-0027 End Row Switch Box Male 3-pin for Battery, Female 4-pin for Control 4A Cable Part Numbers: Description Connection Amp Rating 2520-0218 7M (23 ft) backbone cable Threaded, M12 A-code by M12 A-Code 4A 2520-0217 Single end row control 27M (88.5 ft) cable Threaded, Male 4-pin M12 by female 4-pin M12 4A 2520-0219 Y-cable with two 20M (65 ft) segments Threaded, Male 4-pin by two Female 3-pin M12 A-Code 4A 2520-0216 7M (23 ft) battery cable Threaded, Female 3-pin A-Code by flying leads 4A Control Box 2850-0027 2520-0216 2520-0218 2520-0217 ProStop-E Valve 2520-0219 Step-by-Step Guide: See Hypro’s Step-by-Step Guide to build your End/Fence Row Kit. www.hyprospraytips.com/stepbystep 217 ACCESSORIES–PROSTOP-E AND FENCE ROW CONTROL Fence Row Control Box Express Boom Assembly Modular Boom Sections 15” or 20” nozzle spacing Quick shutoff and easy cleanout with Express End Cap Equipped with express fittings 1” schedule 5 stainless steel pipe Performance tested to 150 psi rating UF Clamp & Gasket Included 5-way ProFlo nozzle bodies w/ EPDM 8psi DCV Express Boom Assembly Benefits Express End Cap Benefits • Eliminates trapped air from the boom by allowing air to escape through the nozzle body, reducing nozzle turn-off time by 85% • Convert 20” nozzle spacing to 15” or 15” to 20” • Eliminates “dead-ends” of pipe where chemical residue can build-up • Cleanout port for easy boom flushing • Creates a cleaner looking plumbing system by eliminating the need for an extra fitting at the end of the boom • Greatly reduces assembly time 1 Boom Configuration Instructions: • Easily convert your boom from polypropylene to stainless steel • Tested as a complete assembly to eliminate any potential assembly defects • Single and bulk pack options that allow for standard shipping methods (i.e. FedEx®, UPS®, etc.) • Improve sprayer performance with Express fittings and optimized design Complete boom assembly configuration sheet (visit www.hypropumps.com/express for configuration worksheet). Note sprayer model, number of sections, desired spacing’s and boom length. Walk boom from left breakaway to right* (Note all feeds, section controls, breakaways, etc.). If you run into configurations larger than 6 nozzles bodies with 15” spacing or 5 nozzles bodies with 20” spacing, break section into two to fit express boom system. If you have any questions, please contact your local Hypro representative or Hypro technical team. Review ‘Quote’ tab on configuration worksheet. Re-evaluate boom configuration to insure proper assembly. Look specifically at where the tee fitting will be plumbed to the feed line. If there are interference issues with the boom structure look at alternative horizontal fittings that allow feed lines to mate up to express boom. Print ‘Quote’ sheet and submit to your local Hypro sales representative or email to [email protected] for pricing and availability. 3 2 *When converting from 20” to 15” its suggested to start at center of boom and work left. Mark each 15” and note all feeds. Then begin Step 1. Hypro Quote Review: Hypro will review boom assembly quote sheet submitted. If local dealer is not listed on sheet, Hypro will contact you for final ordering procedures. Example Configuration w/15” Spacing: Section Sequence Boom Pipe Part Number Configuration B Section 2 C Section 3 D Section 4 E F 2410-0055 2410-0068 2410-0075 2410-0068 2410-0075 2410-0068 2410-0060 2X3 4X4 5X5 4X4 5X5 4X4 3X2 A Section 1 (A) (B, D, F,) (C, F,) (G,) 218 Section 5 G Modular Boom Sections Hypro’s Express Boom Assembly allows you to CUSTOMIZE each boom section by choosing the quantity of nozzle bodies either left or right of the tee for each section. Express Boom Assembly has the FLEXIBILITY to meet any boom design. These single section CUSTOM configurations can range from one nozzle body on the left and/or right branch, to six (15” spacing’s) nozzle bodies on each branch. Review the chart below for all configuration options. Tee Choose Left Branch Choose Right Branch 1 1 2 2 3 3 4 4 5 5 6* 6* * Only available in 15” spacings. Product Configurations Configuration 15" Spacing Part Number 20" Spacing Part Number Configuration 15" Spacing Part Number 20" Spacing Part Number 1X1 2410-0047 2410-0021 5X1 2410-0071 2410-0041 1X2 2410-0048 2410-0022 5X2 2410-0072 2410-0042 1X3 2410-0049 2410-0023 5X3 2410-0073 2410-0043 1X4 2410-0050 2410-0024 5X4 2410-0074 2410-0044 1X5 2410-0051 2410-0025 5X5 2410-0075 2410-0045 1X6 2410-0052 - 5X6 2410-0076 - 2X1 2410-0053 2410-0026 6X1 2410-0077 - 2X2 2410-0054 2410-0027 6X2 2410-0078 - 2X3 2410-0055 2410-0028 6X3 2410-0079 - 2X4 2410-0056 2410-0029 6X4 2410-0080 - 2X5 2410-0057 2410-0030 6X5 2410-0081 - 2X6 2410-0058 - 6X6 2410-0082 - 3X1 2410-0059 2410-0031 1XHB 2410-0086 2410-0086 3X2 2410-0060 2410-0032 2XHB 2410-0087 2410-0091 3X3 2410-0061 2410-0033 3XHB 2410-0088 2410-0092 3X4 2410-0062 2410-0034 4XHB 2410-0097 2410-0093 3X5 2410-0063 2410-0035 5XHB 2410-0098 2410-0094 3X6 2410-0064 - HBX1 2410-0083 2410-0083 4X1 2410-0065 2410-0036 HBX2 2410-0084 2410-0089 4X2 2410-0066 2410-0037 HBX3 2410-0085 2410-0090 4X3 2410-0067 2410-0038 HBX4 2410-0099 2410-0095 4X4 2410-0068 2410-0039 HBX5 2410-0100 2410-0096 4X5 2410-0069 2410-0040 4X6 2410-0070 - 219 ACCESSORIES–EXPRESS BOOM ASSEMBLY Express Boom Assembly DUO REACT Nozzle Bodies Compact and Economical Twin Valve Nozzle Body Duo ReactElectro-Pneumatic Nozzle Body Duo ReactPneumatic Duo ReactPneumatic Duo ReactPneumatic Duo ReactPneumatic • A single and 4-way nozzle body incorporated into one compact unit – Eliminates the need for twin lines or “back to back” configurations – Simple operation, twin valves allow either or both nozzles to spray • Allows the operator to select different nozzle combinations from the cab with a controller • Compact design allows for easy integration into many boom designs • Pneumatic only or electro-pneumatic actuated valve options – Electro-pneumatic body can be used in place of a section control valve to control up to 7 pneumatic Duo React nozzle bodies • Available with hinged clamps 1/2”, 3/4”, 1”, 20mm and 25mm Duo React Electro-Pneumatic Twin Valve Nozzle Bodies for Wet Boom Seal Options/ Housing Reference Viton®/Green 1/2” 4214-2502V 3/4” 4214-2503V (to clamp on) Pipe Size 1” 4214-2504V 20 mm 4214-2507V 25 mm 4214-2508V 20 mm 4214-1507V 25 mm 4214-1508V Duo React Pneumatic Twin Valve Nozzle Bodies for Wet Boom Seal Options/ Housing Reference Viton®/Green 1/2” 4214-1502V 3/4” 4214-1503V (to clamp on) Pipe Size 1” 4214-1504V Duo React Spare Parts and Tool Part Number Description 3430-0840V 3021-0006 O-ring and piston sub-assembly kit Cap removal service wrench 220 Nozzle Bodies with the Highest Flow Rates in the Industry BENEFITS • Designed to deliver the highest flow rates across the spraying pressure range – Unique DCV (diaphragm check valve) design reduces restrictions in the flow path, enabling 2.6 gpm (9.8 lpm) with a 5 psi (0.34 bar) pressure drop through the nozzle – Supports faster field speeds with the same coverage and supports direct fertilizer application through the nozzle body DCV flow path • Turret-indexing design provides improved consistency and reliability throughout the life of the nozzle body – eliminating free spinning and seizing problems seen on competitive nozzle bodies • Bayonet style attachment allows for automatic spray alignment using flat fan spray nozzles • Compact design makes mounting easier with less potential interference with the spray boom structure • ProFlo nozzle bodies come standard with an 8 psi (.55 bar) diaphragm check valve. 4 psi (.27 bar), 12 psi (.82 bar), 20 psi (1.37 bar), and 25 psi (1.72 bar)checks are available as options ProFlo Nozzle Body Performance Curve • Three turret styles for an easy change of spray nozzles: single, 3-way, and 5-way 5.0 0.0 Pressure drop (bar) 0.2 0.4 0.6 0.8 1.0 16.0 4.0 Flow (gal/min) • Provides lowest pressure drop at any given flow in the industry • 2.6 gpm (9.84 LPM) with a 5 psi (.345 BAR) pressure drop • Available in wet or dry boom versions • Positive shutoff between each spray position • Custom logos available upon request (minimum quantities apply) 12.0 3.0 2.0 8.0 1.0 4.0 0.0 0 5 10 15 Flow (l/min) FEATURES 0.0 Pressure drop (psi) 3 and 5-Way Nozzle Bodies for Wet Boom (no tab for boom clamp) Turret Options 3 5 3 5 Seal Option/ Housing Reference EPDM/Red Viton®/Green 1⁄2" 4223N-B322 4223N-B522 4223N-B322V 4223N-B522V 3⁄4" 4223N-B323 4223N-B523 4223N-B323V 4223N-B523V (to clamp on) Pipe Size 1" 20mm 4223N-B324 4223N-B327 4223N-B524 4223N-B527 4223N-B324V 4223N-B327V 4223N-B524V 4223N-B527V 25mm 4223N-B328 4223N-B528 4223N-B328V 4223N-B528V Sold in Quantities of 100; Sold as single units through HYPRO-EU only (Cambridge,UK) For Individual Bags, Add Suffix -00 (i.e.: 4223N-B322-00) ProStop Valve in place of DCV - Add sufix “PS” (ie. 4223N-B322PS) Triple Nozzle Bodies for Wet Boom Seal Option/ Housing Reference EPDM/Red Part Number Description 4222N-B322 4222N-B323 4222N-B324 1⁄2" split clamp 3⁄4" split clamp 1" split clamp Single Drop Nozzle Body for Wet Boom Seal Option/ Housing Reference EPDM/Red Viton®/Green 1⁄2" 4221N-B122 4221N-B122V 3⁄4" 4221N-B123 4221N-B123V (to clamp on) Pipe Size 1" 4221N-B124 4221N-B124V Acid resistant polypropylene available with 1” clamp and EPDM Seal. part number: 402265P 1⁄4” FNPT Outlet- Substitute B with F (i.e.: 4221N-F122) Sold in Quantities of 300; Sold as single units through HYPRO-EU only (Cambridge,UK) For Individual Bags, Add Suffix -00 (i.e.: 4221N-B122-00) ProStop Valve in place of DCV - Add sufix “PS” (ie. 4221N-B122PS 221 20mm 4221N-B127 4221N-B127V 25mm 4221N-B128 4221N-B128V ACCESSORIES–DUO REACT AND NOZZLE BODIES PROFLO Nozzle Bodies PROFLO Nozzle Bodies 3 & 5-way Nozzle Bodies with Tab for Boom Clamp Seal Option/ Housing Reference EPDM/Red Viton®/Green Turret Options 3 5 3 5 1⁄2" 4243N-B322 4243N-B522 4243N-B322V 4243N-B522V 3⁄4" 4243N-B323 4243N-B523 4243N-B323V 4243N-B523V (to clamp on) Pipe Size 1" 20mm 4243N-B324 4243N-B327 4243N-B524 4243N-B527 4243N-B324V 4243N-B327V 4243N-B524V 4243N-B527V 25mm 4243N-B328 4243N-B528 4243N-B328V 4243N-B528V Sold in Quantities of 100; Sold as single units through HYPRO-EU only (Cambridge,UK) For Individual Bags, Add Suffix -00 (i.e.: 4243N-B322-00). ProStop Valve in place of DCV - Add sufix “PS” (ie. 4243N-B322PS) 3 & 5-way Nozzle Bodies with Tab for Boom Clamp and Hose Barb for Dry Boom Seal Option/ Housing Reference EPDM/Red Viton®/Green Turret Options 3 5 3 5 3⁄4 " (19 mm) Single Ended HB 4263N-B323S 4263N-B523S 4263N-B323SV 4263N-B523SV Sold in Quantities of 100. For Individual Bags, Add Suffix -00 (i.e.: 4263N-B323S-00). 3⁄4 " (19 mm) Double Ended HB 4263N-B323D 4263N-B523D 4263N-B323DV 4263N-B523DV 1" (25 mm) Single Ended HB 4263N-B324S 4263N-B524S 4263N-B324SV 4263N-B524SV 1" (25 mm) Double Ended HB 4263N-B324D 4263N-B524D 4263N-B324DV 4263N-B524DV Dry Boom Adapters for Wet Boom Nozzle Bodies Part Number Type Clamp Size 4200-0111N 4200-0112N 4200-0113N 4200-0114N 4200-0115N 4200-0211N 4200-0212N 4200-0213N 4200-0214N 4200-0215N Single Single Single Single Single Double Double Double Double Double 1⁄2" Pipe 3⁄4" Pipe 3⁄4" Pipe 1" Pipe 1" Pipe 1⁄2" Pipe 3⁄4" Pipe 3⁄4" Pipe 1" Pipe 1" Pipe US Units 1⁄2" 3⁄4" 1" 3⁄4" 1" 1⁄2" 3⁄4" 1" 3⁄4" 1" Hose Barb Metric Units 13 mm 19 mm 25 mm 19 mm 25 mm 13 mm 19 mm 25 mm 19 mm 25 mm Hose Barb Triple Nozzle Bodies-with DCV Seal Options/ Housing Reference Single hose barb P/N EPDM/Red 4242N-B322S 4242N-B323S Double hose barb P/N 4242N-B322D 4242N-B323D Triple hose barb P/N 4242N-B322T 4242N-B323T US Units 1⁄2" 3⁄4" Hose ID Metric Units 13 mm 19 mm 4242N-B300-Provides 1/4” MNPT Inlet Hose Barb Dry Boom Nozzle Bodies-with DCV Seal Options/ Housing Reference Single hose barb P/N Double hose barb P/N Triple hose barb P/N EPDM/Red 4241N-B121S 4241N-B122S 4241N-B123S 4241N-B121D 4241N-B122D 4241N-B123D 4241N-B121T 4241N-B122T 4241N-B123T Add Prefix ''BG-" for 1 part per retail bag. 222 US Units 3⁄8" 1⁄2" 3⁄4" Hose ID Metric Units 10 mm 13 mm 19 mm Hose Barb Dry Boom Nozzle Bodies-with Top-Mounted DCV Seal Options/ Housing Reference Single hose barb P/N Double hose barb P/N EPDM/Red 4240N-B121S 4240N-B122S 4240N-B123S 4240N-B121D 4240N-B122D 4240N-B123D US Units 3⁄8" 1⁄2" 3⁄4" Hose ID Metric Units 10 mm 13 mm 19 mm Add Prefix ''BG-" for 1 part per retail bag. Single Nozzle Bodies with DCV Seal Options/ Housing Reference 1/4" MNPT x 1/4" FNPT 4 PSI (.28 BAR) 8 PSI (.55 BAR) 8 PSI (.55 BAR) 11/16" UNF x Bayonet 8 PSI (.55 BAR) 3/8” (10 mm) HB x Bayonet 8 PSI (.55 BAR) 1/4" MNPT x Bayonet 25 PSI (1.72 BAR) 4 PSI (.28 BAR) EPDM/Red 4240N-F110 4240N-F120 4240N-F150 4240N-B010 4240N-B020 4241N-B120U QT14-1-NDC Viton®/Green 4240N-F110V 4240N-F120V 4240N-F150V 4240N-B010V 4240N-B020V - - Push-to-Connect Nozzle Bodies DCV Size 1/4" 3/8” 1/4" 3/8” Type PTC to Bayonet PTC to PTC Push-to-Connect (PTC) Nozzle Body Part Numbers 4 PSI (.28 BAR) 25 Std. Pack 1 Per Bag 4247N-B119 BG-4247N-B119 4247N-B111 BG-4247N-B111 4247N-C119 BG-4247N-C119 4247N-C111 BG-4247N-C111 8PSI (.55 BAR) 25 Std. Pack 1 Per Bag 4247N-B129 BG-4247N-B129 4247N-B121 BG-4247N-B121 4247N-C129 BG-4247N-C129 4247N-C121 BG-4247N-C121 Hose Barb Dry Boom Nozzle Bodies-No DCV Single hose barb P/N Double hose barb P/N Triple hose barb P/N 4231N-B101S 4231N-B102S 4231N-B103S 4231N-B101D 4231N-B102D 4231N-B103D 4231N-B101T 4231N-B102T 4231N-B103T Wet Boom Single Nozzle Bodies-No DCV US Units 3⁄8" 1⁄2" 3⁄4" Hose ID Metric Units 10 mm 13 mm 19 mm Replacement Nozzle Body Stem Seals Single hose barb P/N Hose ID Part Number Description/Material 4201N-B102 1⁄2" clamp 1723-0142 10 mm Wet Boom Stem Seal-EPDM 4201N-B103 3⁄4" clamp 1721-0220 10 mm Wet Boom Stem Seal-Viton 4201N-B104 1" clamp Add Suffix ''-00" for 1 part per retail bag. Replacement Seal/O-ring Kit ProFlo Body Part Number Description/Material 3430-0754 Contains all internal seals/EPDM 3430-0754V Contains all internal seals/Viton® Screw, Nut & Stem O-ring Kit Part Number 223 3430-0755 3430-0755V Description/Material Contains replacement screw, nut and stem o-ring/EPDM Contains replacement screw, nut and stem o-ring/Viton ACCESSORIES–NOZZLE BODIES Nozzle Bodies EXPRESS Nozzle Body End Caps and Fittings Terminates the pipe at the last nozzle body, eliminating six inches of dead-ends from each pipe end for better boom hygiene. Creates a cleaner looking plumbing system by eliminating the need for an extra fitting at the end of the boom Eliminates trapped air from the boom by allowing air to escape through the nozzle body, reducing nozzle turn-off time by 85% Optional cleanout port for easy boom flushing Express Nozzle Body End Cap Part Number (Carton Qty: 100) Part Number (1 per Bag) 7433-3316 BG-7433-3316 7433-3314 BG-7433-3314 Description Nozzle Body Type 1" Express fitting with nozzle body end cap allows trapped air to escape through the nozzle body and includes removable plug for boom cleanout. 10 mm Stem ™ 13 mm Stem Express Nozzle Body End Cap Retrofit Kit Part Number Description Cutting Jig Material Nozzle Body Type 3410-0044 Kit includes machinist-quality drill bit, drilling and cutting jig for 1" pipe, Emery cloth, and instructions to retrofit conventional wet boom spray pipe for Express nozzle body end caps. Aluminum 10 mm Stem Aluminum 13 mm Stem 3410-0043 We recomend using a Ridgid Pipe Cutter. Available at any hardware store. Express Wet Boom Fittings Part Number (Carton Qty: 50) 7433-2502 7433-2503 7433-2515 7433-2608 7433-2610 7433-2601 7433-2613 -2910-0026 3430-0790 Part Number (1 per Bag) BG-7433-2502 BG-7433-2503 BG-7433-2515 BG-7433-2608 BG-7433-2610 BG-7433-2601 BG-7433-2613 UFG0100E-A BG-2910-0026 BG-3430-0790 For high quality sealing to flange fitting, use Hypro's Universal Flange Gasket. 1 2 3 4 Description Ref # Express Fitting X 1” Universal Flange Straight 2 Express Fitting X 1” Universal Flange Tee (Vertical) 2 Express Fitting X 1" Universal Flange Tee (Horizontal) Express Fitting X 1” Hose Barb Straight Express Fitting X 1” Hose Barb Elbow Vertical Express Fitting X 1” Hose Barb Elbow Horizontal Express Fitting X 1” Male Cam Lock Straight 1” EPDM Universal Flange Gasket provides high quality sealing for flanged fittings Express Clamps & Hardware Kit Express Clamps & Hardware Kit with Pipe O-rings 1 2 3 4 5 6 7 8 9 10 5 7 6 8 224 9 10 ProStop-E • C ontrol spray activation directly on Hypro ProFlo nozzle bodies • Instantaneous on-off control with 12 volt actuation eliminates misapplication and waste • Eliminates the need for centralized valve banks allowing on/off control at the nozzle body for individual or small section control • Two actuation mode options: - Simple, 3-wire, 12 volt on/off actuation - Operate as an individually addressed valve on a CAN bus/ISO bus system • Robust, quarter-turn electric ball valves are highly reliable as compared to solenoid and plunger valves • Innovative locking collar mechanism allows for easy adjustments to valve orientation on the nozzle body • Extremely low continuous power consumption • High flow capacity in a compact valve design ProStop-E - 12 Volt Actuated On/Off Nozzle Control Part Number Description 3305-0011 ProStop-E valve assembly fits all Hypro ProFlow nozzle bodies in place of the check valve ProStop • Rapidly and accurately start and stop nozzle flow • Compatible with convenient push-connect air fittings and tube • Connect one air circuit per boom section • Air pressure activates spray, spring closure provides positive shut-off for transport and storage • Durable and chemically-resistant polypropylene, PVDF, and EPDM components • A 40 psi (3 bar) pneumatic signal controls a maximum spray pressure of 150 psi (10 bar) • Operational temperature range: 41°F to 113°F (5°C to 45°C) • ProStop can be specified in place of the diaphragm check valve (DCV) on select ProFlo nozzle bodies. Add suffix “PS” to nozzle body part number shown. ProStop-Air-Actuated On/Off Nozzle Control Control Part Number Description PS3/4F-PN PROSTOP valve assembly Replacement Check Valve (DCV) includes Flynut, Housing and Spring Housing Reference Red Green 4 PSI (.28 BAR) Orange 4200-0010 4200-0010V Spring Pressure Plunger Reference Color 8 PSI (.55 BAR) 12 PSI (.83 BAR) 20 PSI (1.38 BAR) Black Yellow Gray 4200-0020 4200-0030 4200-0040 4200-0020V 4200-0030V 4200-0040V 25 PSI (1.72 BAR) Blue 4200-0050 4200-0050V Red housing indicates for use with EPDM Seals. Green housing indicates for use with Viton Seals. Note: Diaphragms are sold separately. Replacement Diaphragm Seal Options for check valves Option Part Number Color Reference EPDM Viton® 4200-0004E 4200-0004V Black Green Positive Shut-off Part Number Description 4200-0025 8 PSI (.55 bar) DCV with positive shut-off Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 225 ACCESSORIES–NOZZLE BODIES Nozzle Body Shut-Off Controls Nozzle Body Accessories Wet Boom Blanks Part Number Material Description 400059 400069 400059P* 400069P* Nylon Nylon Polypropylene Polypropylene 3⁄4” Pipe 1” Pipe 3⁄4” Pipe 1” Pipe *Comes standard with Viton® o-ring. Series 404 Swivel and Threaded-Swivel Nozzle Bodies Part Number Description 4200N-0020 4200N-0021 4200N-0023 4200N-0024 4200N-0025 4200N-0026 Single Swivel 1⁄4” FNPT X Quick Attach Double Swivel 1⁄4” FNPT X 2 Quick Attach Single 1⁄4” FNPT X 11⁄16” - 16UN(M) Double 1⁄4” FNPT X 11⁄16” - 16UN(M) Red Retaining Cap 11⁄16” - 16UN(F) Black Retaining Cap 11⁄16” - 16UN(F) Hose Drops Part Number 430001 430002 430201 430202 430201V 430202V US Units 15” 24” 15” 24” 15” 24” Length Metric Units 38.1 cm 60.9 cm 38.1 cm 60.9 cm 38.1 cm 60.9 cm Description Outlet, Inlet 1⁄4” NPT, 11⁄16” - 16UN(M) 1⁄4” NPT, 11⁄16” - 16UN(M) 1⁄4” NPT, Quick Attach Fitting 1⁄4” NPT, Quick Attach Fitting 1⁄4” NPT, Quick Attach Fitting with Viton 1⁄4” NPT, Quick Attach Fitting with Viton Ball Nozzle Holders Part Number Ball Thread Attach Method 40867BN 40868BN 4081B0N 1/4” FNPT 1/4” FNPT 1/4” FNPT Handlock Clamp 1” pipe Handlock Clamp 1-1⁄4” pipe Threaded 1⁄4” MNPT Viton® is a registered trademark of DuPont. Hypro® is a registered trademark of Pentair. 226 11⁄16" UN Nozzle Bodies 1 2 4 3 6 5 Reference Number 1 1 1 1 1 2 2 2 2 3 3 3 4 4 5 6 6 7 Standard Pack 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 Description US Units 11⁄16" - 16UN(M) X 1⁄4" (6 mm) HB Elbows 11⁄16" - 16UN(M) X 3⁄8" (10 mm) HB Elbows 11⁄16" - 16UN(M) X 1⁄2" (13 mm) HB Elbows 11⁄16" - 16UN(M) X 5⁄8" (16 mm) HB Elbows 11⁄16" - 16UN(M) X 3⁄4" (19 mm) HB Elbows 11⁄16" - 16UN(M) X 3⁄8" (10 mm) HB Tees 11⁄16" - 16UN(M) X 1⁄2" (13 mm) HB Tees 11⁄16" - 16UN(M) X 5⁄8" (16 mm) HB Tees 11⁄16" - 16UN(M) X 3⁄4" (19 mm) HB Tees 11⁄16" - 16UN(M) X 3⁄8" (10 mm) HB Crosses 11⁄16" - 16UN(M) X 1⁄2" (13 mm) HB Crosses 11⁄16" - 16UN(M) X 3⁄4" (19 mm) HB Crosses 11⁄16" - 16UN(M) X 3⁄8" (10 mm) HB Nozzle Shanks Straight 11⁄16" - 16UN(M) X 1⁄2" (13 mm) HB Nozzle Shanks Straight 11⁄16" - 16UN(F) X 1⁄4" (6 mm) FNPT Female Spray Nozzle Adapter 11⁄16" - 16UN(M) X 1⁄4" (6 mm) MNPT Nipples 11⁄16" - 16UN(M) X 1⁄2" (16 mm) MNPT Nipples 3⁄8" FNPT X 11⁄16" - 16UN(M) Ball Check Valve for nozzle fittings (10 PSI/ .69 BAR) Includes B12/3B12 nut. Add Prefix "BG-" for 1 part per retail bag. Add Prefix "5BG-" for 5 parts per retail bag. 7 Nylon Part Number NTL14 NTL38 NTL12 NTL58 NTL34 NTT38 NTT12 NTT58 NTT34 T38C T12C T34C 38D 3812D NF1614 NB1614 NB1612 NBC10 Poly Part Number 3NTL14 3NTL38 3NTL12 3NTL58 3NTL34 3NTT38 3NTT12 3NTT58 3NTT34 3T38C 3T12C 3T34C 338D 33812D 3NF1614 3NB1614 3NB1612 ––––––– 11⁄16” UN Nozzle Body Cap and Nut 1 2 3 4 Reference Number Standard Pack Description Nylon Part Number Poly Part Number 1 2 3 3 3 4 25 25 25 25 25 25 11⁄16" - 16UN(F) Nozzle blank cap 11⁄16" - 16UN(F) Nozzle cap for nozzle/barb 1⁄4" (6 mm) HB for 8027⁄38027 cap 3⁄8" (10 mm) HB for 8027⁄38027 cap 1⁄2" (13 mm) HB for 8027⁄38027 cap 11⁄16" - 16UN jamb nut 3942* 8027* K8414 K8438 K8412 B12* 33942* 38027* 3K8414 3K8438 3K8412 3B12* *Fits all nozzle fittings with 11⁄16” male straight thread. 1" Boom Clamp Part Number Standard Pack 2910-0037 25 sets Material Description Polypropylene 1" Boom Clamp to hold 1" pipe on a boom structure Fastners not included Cobra Clip Boom Pipe Mounts B Part Number 0113434307 0113434308 01134343010 A Ref. A B B Description 3⁄4” or 25mm nominal boom pipe mount 1” or 32mm nominal boom pipe mount w/ keep strap 1-1⁄2” or 40mm nominal boom pipe mount w/ keep strap Black Polypropylene Boom Pipe (Undrilled) - Schedule 80 - 20 ft Sections Part Number Nominal Pipe Size 8034-F-00PP 801-F-00PP 80112-F-00PP 3⁄4” 1” 1-1⁄2” Pipe Length US Units 20 ft 20 ft 20 ft Metric Units 6.1 m 6.1 m 6.1 m 227 Wall Thickness Wall Tolerance 0.154 0.179 0.220 +0.020 +0.021 +0.021 Outside Diameter US Units 1.050 1.315 1.905 Metric Units 26.7 mm 33.4 mm 48.4 mm Max. Operating Pressure @ 73º F/22.8º C PSI BAR 270 250 200 18.6 17.2 13.8 ACCESSORIES–NOZZLE BODIES Nozzle Body Accessories Nozzle Body Accessories & Foam Marker 1 3 5 7 2 Quick Fitting Adapters 4 6 8 Reference # Part # Description Packaging 1 2 3 4 5 6 7 8 4200-0015N 4200-0016N 4200N-0017 4200N-0018 4200-0019 9950-0024 9950-0027 CPV007 BG-400275N 1⁄4" BSP x Quick Attach 1⁄4" MNPT x Quick Attach 45º Double Elbow w/Gasket 90º Elbow x Quick Attach 1⁄4" FNPT x Quick Attach Hardi* Adapter Jacto** Adapter 3/8” HB x 1/4” FNPT w/ Boom clamp 1⁄4" FNPT x Quick Attach None None 10/ Bag, Priced Individually 10/ Bag, Priced Individually None 10/ Bag, Priced Per Bag 10/ Bag, Priced Per Bag None 1/Bag * Hardi is a registered trademark of Hardi International A/S ** Jacto is a registered trademark of Jacto, Inc. Vari-Spacing Clamps Part Number Material Piping/Tubing O.D. 413003* 413004* 413005* 413013 413014 413015 413016 413018 Steel Steel Steel Steel Steel Steel Steel 304 Stainless Steel 3⁄4” (26.7 mm) Round Pipe (1.050”) 1” (33.5 mm) Round Pipe (1.315”) 1-1⁄4” (42 mm) Round Pipe (1.660”) 3⁄4” (19 mm) Square Tubing 1” (25 mm) Square Tubing 1-1⁄4” (32 mm) Square Tubing 1-1⁄2” (38 mm) Square Tubing 1-1⁄2” (38 mm) Square Tubing * By pipe, dimensions refer to I.D. (inner diameter). Add Prefix ''BG-" for 1 part per retail bag ProFlo Dry Boom Clamps with Slot for Easy Assembly- Boxes of 100 Part Number Material Piping/Tubing O.D. 1520-1075 1520-1100 1520-1125 1520-1150 1520-1075SS 1520-1100SS 1520-1125SS 1520-1150SS zinc plated steel zinc plated steel zinc plated steel zinc plated steel 304 stainless steel 304 stainless steel 304 stainless steel 304 stainless steel 3/4" (14 mm) square tubing 1" (25 mm) square tubing 1-1⁄4” (32 mm) square tubing 1-1⁄2" (38 mm) square tubing 3/4" (19 mm) square tubing 1" (25 mm) square tubing 1-1⁄4” (32 mm) square tubing 1-1⁄2"(38 mm) square tubing Add Prefix ''BG-" for 1 part per retail bag Steel Boom Clamps for use with 11/16” Nozzle Bodies Part Number Description BC34R* BC100R* BC100 BC114 3⁄4”(26.7 mm) Round Pipe 1” (33.4 mm) Round Pipe 1” (25 mm) Square 1-1⁄4” (32 mm) Square * Dimensions refer to I.D. (inner diameter). Foam Marker Part Number Part Number Description 520005 52520005 Foam Marker System Available for order through HYPRO -EU only (Cambridge, UK) • • • • • • Save money and increase efficiency by avoiding costly misses and overlaps while spraying Covers up to 500 acres (200 hectares) with only a 5-gallon (19 litre) tank No pre-mixing required - foam is made in the drop assembly at the end of the boom Fits any crop sprayer, turf sprayer or seeding machine (extra hose required for booms longer than 60 feet (18 m)– part # 520000-751) Electro-pneumatically operated, requiring a 12-volt DC 6 Amp power supply 108’ (33 m) dual liquid/air hose with thermoformed polystyrene covering for UV protection 228 ProCap tank lids feature a rugged design that is easy to use and provides a safe and secure cover for a variety of tanks. All lids are made from sturdy polypropylene material to withstand harsh chemicals and ultraviolet rays. Increased Labyrinth Breather capacity supports higher tank filling rates Labyrinth Breather As depicted in the graph above, the Hypro Labyrinth Breather consistently performs at a higher fill rate and lower pressure than the typical competitor. Female-Threaded Lids with Gasket Lid Size Breather Type Thread Type Part Number 4” 6” 6” Diaphragm None Spring Universal Universal Universal 354230 TL06-0003 TL06-0004 • Easily replaces an old or lost lid • Available as a solid lid or with a breather • Universal thread has larger diameter to fit any tank thread Female-Threaded Tank Lid Dimensions Part Number A IN(MM) B IN(MM) C IN(MM) 354230 TL06-0003 TL06-0004 1.44 (36.5) 1.85 (47) 1.85 (47) 4.17 (106) 5.66 (144) 5.66 (144) 4.8 (122) 6.35 (161) 6.35 (161) 229 ACCESSORIES–NOZZLE BODIES AND TANK LIDS PROCAP Tank Lids PROCAP Tank Lids • Easily mounted on a flat surface, the ProCap tank lids are available as a solid lid, with a labyrinth breather, or a bullet breather • ProCap lid and ring assembly features DuraLok technology, a unique twist and lock closing system • DuraLok gasket sold separately. Tank Lids and Ring Assemblies with DuraLok™ Technology G = Inside diameter for leak content H = Outside diameter I = Screw hole diameter Breather Type 8" 12" 16" Solid Lid/Ring Labyrinth Lid/Ring Bullet Breather Lid/Ring Solid Lid Labyrinth Lid Only Bullet Breather Lid Ring Only Gasket TL08-0001 TL08-0002 TL08-0003 TL08-0011 TL08-0012 TL08-0013 TL08-0014 TLP-0007 TL12-0001 TL12-0002 TL12-0003 TL12-0011 TL12-0012 TL12-0013 TL12-0014 TLP-0018 TL16-0001 TL16-0002 TL16-0003 TL16-0011 TL16-0012 TL16-0013 TL16-0014 TLP-0023 DuraLok Lid Dimensions Lid Size D IN(MM) E IN(MM) F IN(MM) 8" 16" 10(254) 18.1(460) 8.3(210) 16.2(411) .96(24) .96(24) DuraLok Ring Dimensions Lid Size I IN (mm) G IN (mm) H IN (mm) 8" 16" 9.2 (284) 17.4 (442) 8.25 (210) 16.3 (414) 10.1 (257) 18.3 (465) 180º Hinged Tank Lids with DuraLok Technology • Easily mounted on a flat surface, the ProCap tank lids are available with a labyrinth breather or a bullet breather • ProCap hinged tank lids feature DuraLok technology, a unique twist and lock closing system • Lids come standard with a locking hasp for added security • The 180° hinged design allows the lid to open completely for easy tank access • EPDM lid gasket is included Breather Type Labyrinth Bullet Gasket 230 12" TL12-0006 TL12-0007 TLP-0018 Lid Size 16" TL16-0006 TL16-0007 TLP-0023 ARAG® Male-Threaded Tank Lids and Ring Assemblies • Available as a solid lid or with a labyrinth breather Breather Type 6" 8" 12" 16" 22" Solid Lid/Ring Labyrinth Lid/Ring Solid Lid Lid with Labyrinth Ring - Standard Ring with C Gasket Sealing Gasket Between Tank & Ring Wiper Gasket Between Lid & Ring C Gasket 3522100-1 – 3522100 3522000 350401 – – 352000-020 – 3522120-1 3522221-1 3522120 3522221 3502420 TLP-0046 350420-020 3522120-020 350620-020 3522140-1 3522040-1 3522140 3522040 3502440 350640 350440-020 3522140-020 350640-020 3522160-1 3522060-1 3522160 3522060 3502460 350660 350460-020 3522160-020 TLP-0050 352180-1 352080-1 352180 352080 350480 350680 350480-020 – 350680-020 Male-Threaded Tank Lid Dimensions Lid Size 6" 8" 12" 16" 22" D IN/MM 5.5/140 9.8/250 14.0/355 17.9/454 24.4/620 F IN/MM 4.3/110 8.3/210 12.3/313 16.1/410 22.3/567 H IN/MM 1.2/31 1.2/31 1.0/25 1.2/30 Standard Ring Dimensions A Lid Size 6" 8" 12" 16" 22" L C B A IN/MM 6.3/159 10.0/255 14.2/360 18.2/462 24.4/620 B IN/MM 4.9/125 8.5/215 12.6/320 16.3/415 22.6/575 C IN/MM 4.4/112 7.6/192 11.4/290 15.0/382 21.3/540 L IN/MM 0.7/17 1.5/38 1.5/38 1.4/35 1.6/41 Ring with "C" Gasket Dimensions A Lid Size 8" 12" 16" 22" L C B A IN/MM 10.0/255 14.0/355 18.1/460 24.4/620 B IN/MM 8.5/215 12.6/320 16.3/415 22.6/575 C IN/MM 7.6/192 11.4/290 15.0/382 21.3/540 L IN/MM 1.5/38 1.5/38 1.4/35 1.6/41 Hinged Tank Lids Part Number Part Number Size Description 356040 356041 356240 356241 356060 356061 356260 356261 Y01356040 0135606H Y01356061 - 12" 12" 12" 12" 16" 16" 16" 16" Hinged Lid/Ring with Bullet Breather Hinged Lid/Ring with Bullet Breather and Locking Lid Hinged Lid/Ring with Labyrinth Breather Hinged Lid/Ring with Labyrinth Breather and Locking Lid Hinged Lid/Ring with Bullet Breather Hinged Lid/Ring with Bullet Breather and Locking Lid Hinged Lid/Ring with Labyrinth Breather Hinged Lid/Ring with Labyrinth Breather Available for order through HYPRO-EU only (Cambridge, UK) Gaskets for Hinged Tank Lids S D M Description 12" Wiper Gasket between Lid and Ring 16" Wiper Gasket between Lid and Ring Arag Hinged Dimensions L B Part Number 356640-020NB 356660-020NB Lid Size 12" 16" D-IN (mm) B-IN (mm) L-IN (mm) M-IN (mm) S-IN (mm) 14.45 (367) 18.19 (462) 12.60 (320) 16.34 (415) 3.98 (101) 3.98 (101) 1.04 (26) 1.04 (26) 15.35 (390) 19.13 (486) ARAG®is a registered trademark of ARAG. Hypro® is a registered trademark of Pentair. 231 ACCESSORIES– TANK LIDS Tank Lids Tank Accessories ProClean High Performance Tank and Container Wash Nozzles A C B Part Number Photo Reference Description PC1/2F-36075 A ProClean container nozzle ProClean Plus nozzle 30B48NF70E35 B PC1/2F-235120 C ProClean tank nozzle PV1/2F1/2M-MA D ProClean push-valve assembly PC1/2F-36075-PV A&D ProClean container nozzle and valve D • ProClean tank and container nozzles are designed for better and faster cleaning of empty agrochemical containers and the inside of sprayer tanks • Chemically-resistant and durable PVDF polymer construction • ProClean Rotating Container Nozzle utilizes four fluid-driven rotating jets that target all corners of the container • ProClean Plus Static Blade Container Nozzle has a powerful single blade jet that is directed upwards at 35°; Cuts through residues at the base of containers ProClean Container Nozzle • ProClean Rotating Tank Nozzle utilizes eight fluid-driven rotating jets that cover upper tank surfaces for complete rinsing • Easy operation push-valve is activated with the same force regardless of liquid pressure Pressure (PSI) 0 29 58 87 116 145 26.4 23.8 21.1 18.5 15.9 13.2 10.5 7.9 5.3 2.6 0 ProClean Tank Nozzle Basket Filters Part Number Size Basket Height mm(in) Mesh 9950-55203 9950-08050 9950-08120 9950-08240 9950-12060 9950-12240 9950-16180 9950-16280 9950-16320 5.5" 8" 8" 8" 12" 12" 16" 16" 16" 203 (8") 50 (2.0") 120 (4.7") 240 (9.4") 60 (2.4") 240 (9.4") 180 (7.1") 280 (11.0") 320 (12.6") 18 18 18 18 18 18 18 18 18 232 Flow (GPM) ProClean Plus Nozzle Bulkhead Fitting Part Number A B C D Material 1⁄2” NPT WBH12/34GAS Santoprene 3⁄4” NPT 2-3/4” (70 mm) 2-3/4” (70 mm) 2-7/8” (73 mm) 3-3/8” (86 mm) 3-3/8” (86 mm) 4-1/4” (108 mm) 5-1/2” (140 mm) 7” (178 mm) Polypropylene WBH34 1-5/8” (41 mm) 1-5/8” (41 mm) 2-1/16” (52 mm) 2-1/2” (64 mm) 2-1/2” (64 mm) 3-1/8” (79 mm) 4-1/4” (108 mm) 5-1/2” (140 mm) Gasket Material WBH12 1-3/16” (30 mm) 1-3/16” (30 mm) 1-7/8” (48 mm) 1-7/16” (37 mm) 1-7/16” (37 mm) 1-5/8” (41 mm) 1-3/4” (44 mm) 4-3/16” (106 mm) Gasket Part Number Polypropylene WBH12/34GAS Santoprene Polypropylene WBH100GAS Santoprene WBH100 1” NPT WBH114 1-1⁄4” NPT WBH112 1-1⁄2” NPT WBH200 2” NPT WBH300 3” NPT WBH400 4” NPT Polypropylene WBH114/112GAS Santoprene Polypropylene WBH114/112GAS Santoprene Polypropylene WBH200GAS Santoprene Polypropylene - - Polypropylene - - Add Prefix ''BG-" for 1 part per retail bag. 2 3 1 4 5 Jet Agitators Part Number Ref. Number Thread Max. Input: Output Ration Material 3371-0019 1 3⁄4” NPT (M) x 3⁄4” NPT (M) 3:9 Polypropylene 3371 2 1⁄2” NPT (F) in, 3⁄4” NPT (M) out 3:4 Polypropylene 3371-0028 3 3⁄4” NPT (M) (high volume) 5:1 Polypropylene 3R12 4 1⁄2” NPT (M) Tee — Polypropylene 502069 5 1⁄2” NPT 9 mm Nozzle with Swivel — Polypropylene 52169 5 1⁄2” NPT 9 mm Nozzle — Polypropylene Labyrinth Air Valve Part Number Description 504203-HYP Polypropylene Labyrinth Air Valve with 1” male connection G40004 Gasket for installation in tank Floating Ball Vent Valve Part Number Description 504210* 500615-060 Polypropylene Floating Ball Vent Valve Optional Spring for no-spill applications *2.35” tank hole dimension required for installation. 233 ACCESSORIES– TANK LIDS Tank Accessories Cleanload Chemical Eductor For Safe Loading of Chemicals into Spray Tanks • The Cleanload is a self-contained eduction system which allows the operator to mix liquid and dry chemicals safely and quickly • All crop protection chemistry is mixed at ground level, ensuring the safety of both the operator and the environment • Equipped with tank rinse, designed to completely wash the Cleanload hopper • ProClean™ bottle rinse (see page 232 for more information) allows operator to triple rinse chemical containers on-site Order Information Part Number Tank Size 3376-0870 7 Gallon (26 Litre) 3376-0871 7 Gallon (26 Litre) 3376-1170 7 Gallon (26 Litre) 3376-1171 7 Gallon (26 Litre) 3376-1670 7 Gallon (26 Litre) 3376-1671 7 Gallon (26 Litre) • Optional suction lance allows the operator to educt bulk liquid and dry chemicals (wettable powders, dry flowables and water-dispersible granules) from large containers without secondary handling 3376 Series Right hand flow shown. • See page 235 for performance information on all Cleanload models and Eductors Eductor Turf/Diaphragm Poly - (08mm) High Pressure/Low Flow Turf/Diaphragm Poly - (08mm) High Pressure/Low Flow On-Board Sprayer Poly - (11mm) High Pressure/High Flow On-Board Sprayer Poly - (11mm) High Pressure/High Flow Transfer Pump Poly - (16mm) Low Pressure/High Flow Transfer Pump Poly - (16mm) Low Pressure/High Flow Flow Tank Rinse Style Inlet/Outlet Connection Size Bottle Rinse Assy ISO Outlet Screen Suction Lance Right Hand Premium Sidewall Rinse System 220 Universal Flange Yes Yes Optional Accessory Left Hand Premium Sidewall Rinse System 220 Universal Flange Yes Yes Optional Accessory Right Hand Premium Sidewall Rinse System 220 Universal Flange Yes Yes Optional Accessory Left Hand Premium Sidewall Rinse System 220 Universal Flange Yes Yes Optional Accessory Right Hand Premium Sidewall Rinse System 220 Universal Flange Yes Yes Optional Accessory Left Hand Premium Sidewall Rinse System 220 Universal Flange Yes Yes Optional Accessory 3430-0823 Suction Lance snaps into tank outlet for remote loading of bulk chemical containers 3430-0807 16” Replacement tank lid Closed System Cleanload Safe, Fast, & Simple Chemical Loading System • Chemical loading system that is compliant with Closed System Regulation • Enclosure accommodates many container sizes and fits up to two 2.5 gallon containers at one time • Allows operator to re-seal partially used containers with the original chemical container cap • Easily measure both large and small volumes of chemicals inside enclosure Order Information: Part Number 3377-1170 3377-1171 3377-1670 3377-1671 Application: Nozzle Sprayer Pump High Pressure/High Flow 11 mm Transfer Pump Low Pressure/High Flow 234 16 mm Frame Yes No Yes No Poly Eductor: • Market leading eduction rates designed for real world applications • Optimizes system plumbing costs with an integrated ½” push-toconnect port for tank rinse • One-piece polypropylene educator assembly with mounting bosses and 220 Universal Flange ports • Choose from three nozzle sizes along with right or left-hand pushto-connect orientation to fit your specific application • Rinse port shown in right-hand configuration. Left-hand configuration is 180° from shown. 316 Stainless Steel Eductor: • Inlet and outlet ports are flynut-ready, offering a wrench-free connection of hoses for easy installation and servicing • Dual-ported to accommodate rinse port for either left-hand or right-hand flow orientation Order Information Part Number Application 3371-0036 Nozzle Turf & Diaphragm: High Pressure/Low Flow 3371-0036R Rinse Port Orientation Description Right Hand Includes three 220 Universal Flange Gaskets and a 1/2" Push-to-Connect plug Right Hand Eductor Only Left Hand Eductor Only Right Hand Includes three 220 Universal Flange Gaskets and a 1/2" Push-to-Connect plug Right Hand Eductor Only Left Hand Eductor Only Right Hand Includes three 220 Universal Flange Gaskets and a 1/2" Push-to-Connect plug Right Hand Eductor Only Left Hand Eductor Only Dual Ported 316 Stainless Steel Eductor 8mm 3371-0037R 3371-0038 3371-0038R 3371-0039R 3371-0040 3371-0040R 3371-0041R 3371-0034S On-Board Sprayer: High Pressure/High Flow 11mm Transfer Pump: Low Pressure/High Flow 16mm On-Board Sprayer: High Pressure/High Flow 12mm Performance for all Cleanload Models and Eductors: Eductor Material: Poly Stainless Steel Application: Turf / Diaphragm Pump: High Pressure - Low Flow On-Board Sprayer Pump: High Pressure - High Flow Transfer Pump: Low Pressure - High Flow On-Board Sprayer Pump: High Pressure - High Flow Cleanload Part #: 3376-0870 & 3376-0871 3376-1170 & 3376-1171 3376-1670 & 3376-1671 3375 Models Eductor Part #: 3371-0036, -0036R & -0037R 3371-0038, -0038R & -0039R 3371-0040, -0040R & -0041R 3371-0034S Inlet Pressure PSI BAR Req. Flow GPM LPM Eduction Rate GPM LPM Max Outlet Press GPM LPM Req. Flow GPM LPM Eduction Rate GPM LPM Max Outlet Press PSI LPM Req. Flow GPM LPM Eduction Rate GPM LPM Max Outlet Press PSI LPM Req. Flow GPM LPM Eduction Rate GPM LPM Max Outlet Press PSI LPM 10 0.7 - - - - - - - - - - - - 46.0 174 24.6 93 5.9 0.4 - - - - - - 20 1.4 - - - - - - 26.9 102 35.0 133 6.1 0.4 61.4 233 47.8 181 11.5 0.8 29.5 112 16.5 62 4.9 0.3 30 2.1 16.1 61 31.5 119 5.2 0.4 33.5 127 52.2 198 9.2 0.6 73.5 278 61.2 231 16.9 1.2 35.2 133 26.0 98 7.0 0.5 40 2.8 19.1 72 47.0 178 6.6 0.5 38.0 144 64.4 244 12.3 0.8 82.9 314 67.2 254 22.4 1.5 40.4 153 32.9 125 9.0 0.6 50 3.4 21.4 81 54.5 206 8.1 0.6 41.3 157 72.6 275 15.3 1.1 90.3 342 68.3 258 27.8 1.9 45.3 171 39.1 148 11.0 0.8 60 4.1 23.3 88 61.5 233 9.7 0.7 44.4 168 77.7 294 18.2 1.3 96.2 364 66.8 253 33.1 2.3 49.8 189 45.9 174 13.3 0.9 70 4.8 24.9 94 68.0 258 11.2 0.8 47.5 180 80.5 305 21.1 1.5 101.3 384 65.1 247 38.4 2.6 53.8 204 52.4 198 15.5 1.1 80 5.5 26.4 100 74.1 280 12.7 0.9 50.9 193 82.1 311 23.9 1.6 - - - - - - 57.5 218 58.0 220 17.8 1.2 90 6.2 28.0 106 79.7 302 14.2 1.0 53.9 204 83.3 315 26.6 1.8 - - - - - - 60.7 230 62.0 235 20.0 1.4 100 6.9 29.7 112 84.8 321 15.8 1.1 56.6 214 85.0 322 29.3 2.0 - - - - - - 63.6 241 65.0 246 22.3 1.5 235 ACCESSORIES–CLEANLOAD Cleanload Poly or Stainless Steel Eductor Polypropylene Line Strainers Rated for 80 psi at 70ºF / 5.5 bar at 21ºC Part Number 3350-0085A 3350-0079A 3350-0082A 3350-0056A 3350-0046A 3350-0043A 3350-0040A 3350-0034A 3350-0035A 3350-0057A 3350-0058A 3350-0059A 3350-0071A 3350-0072A 3350-0073A 3350-0112A 3350-0113A 3350-0114A NPT Threads 1⁄4" I.D. (F) & 1⁄2" O.D. (M) 1⁄2" 3⁄4" 1" 1-1⁄4" 1-1⁄2" Replacement Parts for Polypropylene Line Strainers Bowl Screen Mesh O-ring 3351-0036 3800-0048 20 s.s. 1700-0090 EPDM 3351-0036 3800-0046 50 s.s. 1700-0090 EPDM 3351-0036 3800-0047 80 s.s. 1700-0090 EPDM 3351-0039 3800-0029 20 s.s. 1700-0091 EPDM 3351-0039 3800-0025 50 s.s. 1700-0091 EPDM 3351-0039 3800-0026 80 on 20 s.s 1700-0091 EPDM 3351-0039 3800-0029 20 s.s. 1700-0091 EPDM 3351-0039 3800-0025 50 s.s. 1700-0091 EPDM 3351-0039 3800-0026 80 on 20 s.s 1700-0091 EPDM 3351-0043 3800-0040 20 s.s. 1700-0092 EPDM 3351-0043 3800-0041 50 s.s. 1700-0092 EPDM 3351-0043 3800-0042 80 on 20 s.s 1700-0092 EPDM 3351-0043 3800-0043 20 s.s. 1700-0092 EPDM 3351-0043 3800-0044 50 s.s. 1700-0092 EPDM 3351-0043 3800-0045 80 on 20 s.s 1700-0092 EPDM 3351-0043 3800-0065 20 s.s. 1700-0092 EPDM 3351-0043 3800-0066 50 s.s. 1700-0092 EPDM 3351-0043 3800-0067 80 on 20 s.s. 1700-0092 EPDM Cap 3351-0035 3351-0035 3351-0035 3351-0037 3351-0037 3351-0037 3351-0038 3351-0038 3351-0038 3351-0040 3351-0040 3351-0040 3351-0041 3351-0041 3351-0041 3351-0042 3351-0042 3351-0042 All 1⁄2", 3⁄4", 1-1⁄4" and 1-1⁄2" have internal (NPT) female ports, polypropylene cap and bowl. Polypropylene Line Strainers Rated for 200 psi at 70ºF / 14 bar at 21ºC NPT Part Number 3350-0142N 3350-0143N 3350-0144N 3350-0145N 3350-0146N 3350-0147N 3350-0148N 3350-0149N 3350-0150N 3350-0151N 3350-0152N 3350-0153N 3350-0162N** 3350-0163N** 3350-0164N** 3350-0165N** 3350-0154N 3350-0155N 3350-0156N 3350-0157N 3350-0166N** 3350-0167N** 3350-0168N** 3350-0169N** 3350-0158N 3350-0159N 3350-0160N 3350-0161N 3350-0170N** 3350-0171N** 3350-0172N** 3350-0173N** BSP Part BSP Part Number Number* 3350-0142B 20N62230 3350-0143B 20N62250 3350-0144B 20N62280 3350-0145B – 3350-0146B 20N62330 3350-0147B 20N62350 3350-0148B 20N62380 3350-0149B – 3350-0150B 20N62430 3350-0151B 20N62450 3350-0152B 20N62480 3350-0153B – 3350-0162B** – 3350-0163B** – 3350-0164B** – 3350-0165B** – 3350-0154B 20N62530 3350-0155B 20N62550 3350-0156B 20N62580 3350-0157B – 3350-0166B** 203282152** 3350-0167B** 203282153** 3350-0168B** 2032821535** 3350-0169B** – 3350-0158B 20N62630 3350-0159B 20N62650 3350-0160B 20N62680 3350-0161B – 3350-0170B** 203282162** 3350-0171B** 203282163** 3350-0172B** 2032821635** 3350-0173B** – Max. PSI Max. BAR Threads 290 20 1⁄2" FNPT 290 20 3⁄4" FNPT 290 20 1" FNPT 290 20 1" FNPT 250 17 1-1⁄4" FNPT 250 17 1-1⁄4" FNPT 250 17 1-1⁄2" FNPT 250 17 1-1⁄2" FNPT *Available for order through HYPRO-EU only (Cambridge, UK) **Self-cleaning model. 236 Previous Color White Blue Gray Red White Blue Gray Red White Blue Gray Red White Blue Gray Red White Blue Gray Red White Blue Gray Red White Blue Gray Red White Blue Gray Red Screen Size/ Ref. Color 32 Mesh/White 50 Mesh/Blue 80 Mesh/Gray 100 Mesh/Red 32 Mesh/White 50 Mesh/Blue 80 Mesh/Gray 100 Mesh/Red 32 Mesh/White 50 Mesh/Blue 80 Mesh/Gray 100 Mesh/Red 32 Mesh/White 50 Mesh/Blue 80 Mesh/Gray 100 Mesh/Red 32 Mesh/White 50 Mesh/Blue 80 Mesh/Gray 100 Mesh/Red 32 Mesh/White 50 Mesh/Blue 80 Mesh/Gray 100 Mesh/Red 32 Mesh/White 50 Mesh/Blue 80 Mesh/Gray 100 Mesh/Red 32 Mesh/White 50 Mesh/Blue 80 Mesh/Gray 100 Mesh/Red New ISO Color Red Blue Yellow Green Red Blue Yellow Green Red Blue Yellow Green Red Blue Yellow Green Red Blue Yellow Green Red Blue Yellow Green Red Blue Yellow Green Red Blue Yellow Green Screen 3800-0086 3800-0087 3800-0088 3800-0089 3800-0086 3800-0087 3800-0088 3800-0089 3800-0090 3800-0091 3800-0092 3800-0093 3800-0090 3800-0091 3800-0092 3800-0093 3800-0094 3800-0095 3800-0096 3800-0097 3800-0094 3800-0095 3800-0096 3800-0097 3800-0094 3800-0095 3800-0096 3800-0097 3800-0094 3800-0095 3800-0096 3800-0097 Rated for 150 psi at 70ºF / 10.34 bar at 21ºC Rated for 100 psi at 125ºF / 6.9 bar at 51.6ºC 140ºF max./ 60ºC max. Part Number 3350-0085 3350-0085F 3350-0079 3350-0079F 3350-0082 3350-0082F 3350-0056 3350-0131 3350-0046 3350-0042 3350-0043 3350-0068 3350-0040 3350-0132 3350-0034 3350-0044 3350-0035 3350-0045 3350-0057 3350-0060 3350-0058 3350-0061 3350-0059 3350-0062 3350-0071 3350-0074 3350-0072 3350-0075 3350-0073 3350-0076 3350-0112 3350-0115 3350-0113 3350-0116 3350-0114 3350-0117 NPT Threads 1⁄4” I.D. (F) & 1⁄2” O.D. (M) 1⁄2" (F) 3⁄4" (F) 1" (F) 1-1⁄4” (F) 1-1⁄2” (F) Replacement Parts for Nylon Line Strainers Bowl Screen Mesh 3800-0048 20 s.s. 3800-0048 20 s.s. 3800-0046 50 s.s. 3351-0020 (Clear) 3800-0046 50 s.s. 3800-0047 80 s.s. 3800-0047 80 s.s. 3800-0029 20 s.s. 3800-0029 20 s.s. 3351-0005 3800-0025 50 s.s. (White) or 3351-0015* 3800-0025 50 s.s. (Clear) 3800-0026 80 on 20 s.s. 3800-0026 80 on 20 s.s. 3800-0029 20 s.s. 3800-0029 20 s.s. 3351-0005 3800-0025 50 s.s. (White) or 3351-0015* 3800-0025 50 s.s. (Clear) 3800-0026 80 on 20 s.s. 3800-0026 80 on 20 s.s. 3800-0040 20 s.s. 3800-0040 20 s.s. 3351-0013 3800-0041 50 s.s. (White) or 3351-0024* 3800-0041 50 s.s. (Clear) 3800-0042 80 on 20 s.s. 3800-0042 80 on 20 s.s. 3800-0043 20 s.s. 3800-0043 20 s.s. 3351-0013 3800-0044 50 s.s. (White) or 3351-0024* 3800-0044 50 s.s. (Clear) 3800-0045 80 on 20 s.s. 3800-0045 80 on 20 s.s. 3800-0065 20 s.s. 3800-0065 20 s.s. 3351-0013 3800-0066 50 s.s. (White) or 3351-0024* 3800-0066 50 s.s. (Clear) 3800-0067 80 on 20 s.s. 3800-0067 80 on 20 s.s. Cap 3351-0022 3351-0022 3351-0022 3351-0022 3351-0022 3351-0022 3351-0007 3351-0007 3351-0007 3351-0007 3351-0007 3351-0007 3351-0006 3351-0006 3351-0006 3351-0006 3351-0006 3351-0006 3351-0014 3351-0014 3351-0014 3351-0014 3351-0014 3351-0014 3351-0016 3351-0016 3351-0016 3351-0016 3351-0016 3351-0016 3351-0026 3351-0026 3351-0026 3351-0026 3351-0026 3351-0026 O-ring 1700-0064 Buna-N 1700-0065 Viton 1700-0064 Buna-N 1700-0065 Viton 1700-0064 Buna-N 1700-0065 Viton 1700-0044 Buna-N 1700-0045 Viton 1700-0044 Buna-N 1700-0045 Viton 1700-0044 Buna-N 1700-0045 Viton 1700-0044 Buna-N 1700-0045 Viton 1700-0044 Buna-N 1700-0045 Viton 1700-0044 Buna-N 1700-0045 Viton 1700-0057 Buna-N 1700-0058 Viton 1700-0057 Buna-N 1700-0058 Viton 1700-0057 Buna-N 1700-0058 Viton 1700-0057 Buna-N 1700-0058 Viton 1700-0057 Buna-N 1700-0058 Viton 1700-0057 Buna-N 1700-0058 Viton 1700-0057 Buna-N 1700-0058 Viton 1700-0057 Buna-N 1700-0058 Viton 1700-0057 Buna-N 1700-0058 Viton * Clear Polyimide Bowl - Add Suffix “P" - (ie.: 3350-0057P) - 1⁄2", 3⁄4", 1", 1-1⁄4" and 1-1⁄2". 1⁄2", 3⁄4",1",1-1⁄4" and 1-1⁄2" have internal (NPT) Female Ports, Type 6 nylon cap bowl. Nylon Suction Strainers Estimated Weight Ea. US Units Metric Units 4 oz. 114 g Part Number Thread Screen 3350-0069 3⁄4" NPT (M) 3⁄4" (19 mm) hose barb (all nylon) garden hose (M) 50-mesh nylon 4 oz. 114 g 50-mesh nylon 4 oz. 114 g 3350-0032 3350-0077 237 50-mesh nylon ACCESSORIES–STRAINERS Nylon Line Strainers Adjustable Pattern Spray Guns 3381-0016 3381-0021 • Adjustable pattern spray gun • Adjustable pattern spray gun • 15" (38 cm) barrel • 21" (53 cm) barrel • 3mm nozzle • 3mm nozzle • 3⁄8" (10 mm) MNPT inlet • 3⁄8" (10 mm) and 1⁄2” (13 mm) hose barb • Sized for spot spraying • Sized for spot spraying Order Information Order Information Part Number Max PSI Max BAR Max GPM Max LPM Part Number Max PSI Max BAR Max GPM Max LPM 3381-0016 120 8 1 4 3381-0021 60 4 1 4 3381-0036 3381-0043 & 3381-0043L • Adjustable pattern spray gun • Adjustable pattern spray gun • 19" (48 cm) barrel • 7-1/4" (18 cm) or 18" (45 cm) barrel • 3mm nozzle • 2.3mm nozzle • 3⁄8" (10 mm) hose barb • 3⁄8" (10 mm) and 1⁄2" (13 mm) hose barb Order Information Order Information Part Number Max PSI Max BAR Max GPM Max LPM 3381-0036 120 8 2.5 10 Barrel Length Max PSI Max BAR Max GPM Max LPM US Units Metric Units 7-1/4” 18 cm 600 40 11 18 Part Number 3381-0043 3381-0043L Spray Gun Nozzles for 3381-0043 and 3381-0043L Guns Part Number Orifice Performance AMT-15010 replaces 9920-61.1802.45 1.0 mm GPM spray angle throw, ft AMT-15012 replaces 9920-61.1802.46 1.2 mm GPM spray angle throw, ft AMT-15015 replaces 9920-61.1802.47 1.5 mm GPM spray angle throw, ft AMT-15018 replaces 9920-61.1802.48 1.8 mm GPM spray angle throw, ft AMT-15020 replaces 9920-61.1802.55 2.0 mm GPM spray angle throw, ft AMT-15023 replaces 9920-61.1802.68 2.3 mm GPM spray angle throw, ft 9920-61.1802.45 4.0 mm GPM throw, ft 45 PSI Cone Straight 0.24 0.24 30º 3.2 8.2 0.35 0.38 32º 3.9 9.8 0.40 0.50 32º 3.9 11.5 0.50 0.75 40º 4.9 13.0 0.73 1.10 40º 3.9 14.5 0.90 1.40 40º 4.9 16.5 - - 100 PSI Cone Straight 0.35 0.37 30º 4.9 13.0 0.55 0.55 35º 5.5 14.5 0.62 0.80 35º 6.5 14.5 0.73 1.20 42º 6.5 16.5 1.05 1.60 42º 6.0 19.5 1.30 1.90 42º 6.5 24.5 - - 18" 45 cm 600 40 11 9920-261703-69 Replacement Barrel for 3381-0043 9920-35.1703.67 Replacement Barrel for 3381-0043L 3430-0768 Replacement nozzle kit 150 PSI Cone Straight 0.40 0.45 40º 6.5 18.0 0.60 0.65 45º 7.2 20.0 0.62 0.93 45º 8.2 23.0 0.85 1.35 50º 8.2 26.0 1.30 1.90 55º 8.2 29.5 1.50 2.30 55º 10.0 32.0 1.9 10 238 3.4 36 200 PSI Cone Straight 0.53 0.60 40º 6.5 18.5 0.80 0.93 42º 7.2 21.0 0.95 1.25 45º 8.2 24.0 1.15 1.75 45º 8.2 27.0 1.50 2.40 55º 8.2 30.5 2.00 3.20 55º 10.0 35.0 - - 300 PSI Cone Straight 0.57 0.60 40º 6.5 19.5 0.88 0.90 42º 7.2 22.0 1.00 1.30 42º 8.2 24.5 1.20 1.90 50º 8.2 28.0 1.60 2.50 55º 8.2 31.0 2.10 3.30 55º 10.0 36.0 4.6 10 8.0 38 450 PSI Cone Straight 0.70 0.75 40º 7.2 21.0 1.10 1.20 40º 8.2 23.5 1.30 1.70 42º 8.2 26.0 1.60 2.30 48º 9.8 31.0 1.90 3.00 53º 9.8 34.0 2.70 4.10 53º 9.8 38.0 5.5 10 9.5 40 18 600 PSI Cone Straight 0.83 0.90 38º 8.2 23.0 1.30 1.40 40º 8.2 25.5 1.50 1.95 42º 10.0 28.0 1.75 2.80 48º 10.0 33.0 2.20 3.50 50º 10.0 36.0 3.10 4.80 51º 10.5 39.0 6.3 12 11.0 40 3381-0010 and 3381-0011 3381-0013 • Adjustable pattern spray gun • Adjustable pattern spray gun • 17" (43 cm) or 21" (53 cm) barrel • 7" (18 cm) barrel • 3mm or 4mm nozzle • 3mm nozzle • 1⁄2” (13 mm) MNPT inlet • 1⁄2” (13 mm) MNPT inlet Order Information Part Number 3381-0010 Barrel Length US Units Metric Units 17" 43 cm 3381-0011 21" 53 cm ACCESSORIES–SPRAY GUNS Adjustable Pattern Spray Guns Order Information Nozzle Max PSI Max BAR Max GPM Max LPM 3mm 1200 83 25 95 4mm 1200 83 30 114 9920-KIT10/11 Repair Kit 9920-248 Swivel Kit Part Number Max PSI Max BAR 3381-0013 9920-248 700 40 Max GPM Max LPM 19 Swivel Kit 72 Tree Spraying Guide Hypro Diaphragm Pump Gas Engine Applications Spray Height Pump/Engine Model Engine Shaft 30-35 ft. 9910-D252GRGI58 (w/o engine) 9910-D252GRGI (w/o engine) D252GRGI-25 (w/2.5 hp PowerPro™) D252GRGI-55 (w/5.5 hp PowerPro™) 6 GPM; 290 PSI 9910-D30GRGI (w/o engine) D30GRGI-65 (w/6.5 hp PowerPro™) D30HRGI-65 (w/6.5 hp PowerPro™) D30HRGI-65E (w/6.5 hp PowerPro™) 9.5 GPM; 580 PSI 9910-D50 (w/o engine, controller or gearbox) 14 gpm; 580 psi 9910-D503GRGI (w/o engine) 15 gpm; 580 psi 9910-D813GRGI (w/o engine) 21 gpm; 725 psi 9910-D1064GRGI (w/o engine) 28 gpm; 725 psi Min. 2.5 hp SAE j609a flange mount 5/8" 3/4" 5/8" 3/4" 3381-0010 or 3381-0013 Min. 5.0 hp SAE j609a flange mount 3/4" 3/4" 3/4" 3/4" 3381-0010 or 3381-0013 Min 8.0 hp SAE j609a flange mount 1" 3381-0011 3385-4000 Min 8.0 hp SAE j609a flange mount 1" 3381-0011 3385-4000 Min 14.0 hp SAE j609a flange mount 1" 3381-0011 3385-4500 Min 18.0 hp SAE j609a flange mount 1" 3381-0011 3385-6000 35-40 ft. 45-50 ft. 45-50 ft. 50-57 ft. 60-68 ft. Spray Gun Nozzle 3385-3000 3385-3000 All GRGI pump models come complete with gear reduction and control valve. Performance Chart for Models 3381-0010, 3381-0011 and 3381-0013 Spray Guns Orifice Hypro Model Pressure In PSI** Diameter Number Performance In MM 200 PSI Setting 350 PSI Setting 500 PSI Setting 600 PSI Setting 650 PSI Setting 700 PSI Setting 850 PSI Setting Cone Straight Cone Straight Cone Straight Cone Straight Cone Straight Cone Straight Cone Straight 3385-1500 1.5 capacity in gpm max throw (ft)* 1.14 9.2 1.26 21.5 1.48 10.3 1.7 25.2 1.8 11.2 2 28 1.9 12.1 2.2 31.8 2 12.1 2.3 32 2.1 12.3 2.4 32.3 2.2 13.1 2.5 34.3 3385-2300 2.3 capacity in gpm max throw (ft)* 2.1 11.4 2.7 29 2.7 12.9 3.7 33.9 3.4 14.8 4.5 37.9 3.8 16.6 4.9 41.5 3.8 17 5 41.7 3.9 17.7 5.1 42 4.2 19 5.8 45.7 3385-3000 3 3385-3500 3.5 3385-4000 4 3385-4500 4.5 3385-5000 5 3385-5500 5.5 3385-6000 6 3385-7000 7 capacity in gpm max throw (ft)* capacity in gpm max throw (ft)* capacity in gpm max throw (ft)* capacity in gpm max throw (ft)* capacity in gpm max throw (ft)* capacity in gpm max throw (ft)* capacity in gpm max throw (ft)* capacity in gpm max throw (ft)* 2.9 11.7 5.8 13.6 7 15.1 8.2 18.1 9.8 19.6 10.7 19.6 11.5 21.1 11.5 21.1 4.6 29.2 6 36.2 7.3 37.7 8.9 39.2 10.2 40.7 11.5 42.2 12.6 43.7 13.5 46.8 3.7 12.9 7.9 19 9.6 20.6 11.1 22.2 13.3 23.8 14.4 23.8 15.6 25.3 15.6 25.3 6.3 33.9 8.2 41.2 9.9 42.8 12 44.3 13.8 47 15.6 50.7 17.1 54 18.4 57 4.8 13.8 9.6 22.6 11.6 24.3 13.4 26 16 27.5 17.4 29 18.8 30.7 18.8 30.7 7.5 36.2 9.9 45.3 12 47 14.5 50.1 16.7 53.3 18.8 57 20.6 60 22.2 63 5.2 15.6 10.7 25.5 12.9 27.2 15 30.6 18 32.3 19.6 34 21 35.6 21 37.4 8.4 40.8 11.1 50 13.5 53 16.3 54 18.7 59 21 63 23.2 66 25 70 5.3 16 11 25.5 13.2 27.2 15.4 30.6 18.4 32.3 20 34 21.5 35.6 21.5 37.4 8.5 40.7 11.3 51 13.8 54 16.6 56 19.1 61 21.5 64 23.7 67 25.4 71 5.4 16.2 11.2 27 13.6 28.5 15.7 31 18.9 32.8 20.4 34.5 22 36 22 38 8.6 42 11.6 51.5 14.1 55 17 57 19.5 62 22 65 24.2 68 26 72 6 17 12.4 28.8 15 29 17.4 31.5 20.8 32.8 22.6 34.5 24.4 36 24.4 38 9.6 44.1 12.8 54 15.6 59 18.9 62 21.6 67 24.4 70 26. 9 74 29 77 * Figures shown are guidelines for vertical throw. ** Pressures based on relief valve settings at straight throw. 239 Adjustable Pattern Spray Guns Long range high pressure spray gun • Brass body • Stainless steel pipe • Handle and nozzle protection in high-resistance polymer • Ergonomic handgrip • Quick-release trigger lock • Swivel inlet port • Adjustable spray pattern from hollow cone to solid stream Top Gun 003430 Connection Metric Units 1⁄2” HB 13 mm Estimated Weight Ea. Metric US Units Units 3 lbs. 8 oz. 13 kg 003440 1⁄2” HB 13 mm 3 lbs. 8 oz. 13 kg 003460 1⁄2” HB 13 mm 3 lbs. 8 oz. 13 kg 003470 1⁄2” HB 13 mm 3 lbs. 8 oz. 13 kg Part Number Max.PSI Max.BAR Max.GPM Max.LPM Nozzle Size Nozzle Number 002201-3430 850 60 35.0 130 3.0 mm 002201-3440 850 60 35.0 130 4.0 mm 002201-3460 850 60 35.0 130 6.0 mm 002201-3470 850 60 35.0 130 7.0 mm US Units Hose barb and nut kit (sold separately): 3⁄8” - 006320; 1⁄2” - 006330. Pressure (PSI) 200 PSI 3 4 6 7 350 PSI 500 PSI 600 PSI 720 PSI Cone Straight Cone Straight Cone Straight Cone Straight Cone Straight Flow GPM 3.8 5.2 5.6 6.8 6.6 8.5 7 9.2 7.3 10 Max. throw ft. 12 36 13 37 15 41 16 44 21 46 15.9 Flow GPM 6 8.2 7.3 12.7 8.6 13.2 10.2 14.5 11.4 Max. throw ft. 14 42 15 44 16 49 19 52 23 57 Flow GPM 9 16 11.5 22.2 14 25.8 15.5 26.7 16.2 27.5 Max. throw ft. 19 59 21 62 25 66 26 68 31 72 Flow GPM 10.5 17.5 13.8 25.7 16.8 30.6 18.2 33.2 20.3 34.3 Max. throw ft. 21 60 23 67 26 72 27 77 31 82 Part Number Max.PSI Max.BAR Max.GPM Max.LPM 506532V 150 10 40.0 150 US Units 1⁄2” HB 506530V 150 10 40.0 150 3⁄4” HB 19 mm 506531V 150 10 40.0 150 1” HB 25 mm Econo Gun 240 Connection Metric Units 13 mm 47 Gun 18 Gun • Stainless steel ball and seat • Lightweight, yet durable • Front entry; Thumb set safety • Fast, easy servicing • Stainless steel ball, seat, spring and glands • Durable insulated handle; Rear entry • Reduced trigger pressure; Less operator fatigue • Consistent weep control at 1/4 gpm (+/-15%) on “W” version 3381-0017 3381-0018W Part Number Inlet/Outlet Max. Max. PSI BAR 3381-0047 3/8” (F)NPT x 1/4” (F)NPT 2150 150 Max. GPM Max. LPM Max Temp Max Temp 7.0 27 210° F 100° C Part Number Inlet/Outlet Max. Max. PSI BAR 3381-0018 3/8” (F)NPT x 1/4” (F)NPT 4000 3381-0018W* 280 Max. GPM Max. LPM Max Temp Max Temp 9.0 34 300° F 150° C * Weep Version Dual Lance 32 Gun 3381-0032W Part Number Inlet/Outlet Max. Max. PSI BAR 3381-0032 3/8” (F)NPT x1/4” (F)NPT 4000 3381-0032W* • Insulated lance; insulated selector handle • Dual-molded nozzle protectors • 40” length, rotating handle for proper hi/lo nozzle control “W” version • Chrome plated • Stainless steel ball, seat, spring and glands • Durable insulated handle; Rear entry • Reduced trigger pressure; Less operator fatigue • Consistent weep control at 1/4 gpm (+/-15%) on “W” version 280 Max. GPM Max. LPM Max Temp Max Temp Part Number Inlet/Outlet Max. PSI Max. BAR Max. GPM Max. LPM Max Temp Max Temp 7.0 27 300° F 150° C 3365-0002 1/4” (M)NPT x Dual 1/4” (M) 3000 210 10.5 40 300° F 150° C * Weep Version Zinc-Plated Bent Single Lances with Insulated Handle Length Part Number Inlet/Outlet 24" 61 cm 3365-0004/24 36" 91 cm 3365-0004/36 47" 119 cm 3365-0004/47 1/4" (M) NPT Zinc-Plated Straight Single Lances with Insulated Handle Max. Max. Max. Max. Max PSI BAR GPM LPM Temp Max Temp 3600 150° C 250 10.5 40 300° F • Stainless steel ball, seat, spring and glands • Durable insulated handle • Reduce trigger pressure; Less operator fatigue • 16” Insulated lance length w/screw coupling Rear Entry Spray Gun with Black Lances & Coupler Part Number Inlet/Outlet 3381-0034 3/8” (F)NPT x Quick Coupling (screw type) Max. Max. PSI BAR 3500 240 Max. GPM 7.0 Max. LPM 27 Max Temp 300° F Max Temp 150° C Length Part Number 24" 61 cm 3365-0005/24 36" 91 cm 3365-0005/36 47" 119 cm 3365-0005/47 Inlet/Outlet Max. Max. Max. Max. PSI BAR GPM LPM 3/8” (M)NPT x 3600 1/4” (F)NPT 250 10.5 40 Max Temp Max Temp 300° F 150° C Zinc-Plated Lance Extensions for 3381-0034 Gun Length Part Number 14" 36 cm 3365-0007/14 24" 61 cm 3365-0007/24 36" 91 cm 3365-0007/36 241 Inlet/Outlet Max. Max. Max. Max. PSI BAR GPM LPM Max Temp Max Temp Quick Coupling x 1/4" (M)NPT 3500 300° F 150° C 240 10.5 40 ACCESSORIES–SPRAY GUNS Spray Guns & Lances Nozzles Hi-Lo Variable Nozzle Part Number Variable Hi-Lo Variable Nozzle No. - 3324-2000.85 2.0 3324-1001.05 3324-2001.05 3.0 3324-1001.1 3324-2001.1 3.5 3324-1001.15 3324-2001.15 3.7 3324-1001.2 3324-2001.2 4.0 3324-1001.25 3324-2001.25 4.3 • Variable fan pattern, 0˚ to 80˚ 3324-1001.3 3324-2001.3 4.6 3324-1001.35 3324-2001.35 5.0 • Push/Pull for pressure adjustment to draw soap • Twist for fan adjustment 3324-1001.4 3324-2001.4 5.3 3324-1001.45 3324-2001.45 5.6 3324-1001.5 3324-2001.5 6.0 Hypro Part Number Inlet (NPT) Max PSI Max Bar Max GPM Max LPM Max Temp Max Temp 1/4” (F) 3000 210 8.0 30 300° F 150° C Nozzle Capacity (GPM) at Pump Pressure (PSI) Orifice Diameter PSI Variable Hi-Lo Variable Nozzle No. 3324-1000.85 3324-2000.85 2.0 3324-1001.05 3324-2001.05 3.0 1.05 .041 1.22 1.30 1.37 1.45 1.52 1.66 1.86 2.04 2.16 2.42 2.64 3324-1001.1 3324-2001.1 3.5 1.10 .043 1.35 1.43 1.52 1.60 1.68 1.84 2.06 2.26 2.39 2.67 2.91 3324-1001.15 3324-2001.15 3.7 1.15 .045 1.55 1.63 1.72 1.80 1.88 2.03 2.25 2.46 2.59 2.90 3.17 mm inches 600 700 800 900 1000 1200 1500 1800 2000 2500 3000 .085 .077 0.80 .089 .095 1.00 1.10 1.20 1.35 1.40 1.40 .033 .033 3324-2001.2 4.0 1.20 .047 1.60 1.70 1.80 1.90 2.00 2.19 2.45 2.69 2.84 3.17 3.44 3324-2001.25 4.3 1.25 .049 1.72 1.83 1.94 2.05 2.16 2.36 2.64 2.90 3.06 3.41 3.70 3324-1001.3 3324-2001.3 4.6 1.30 .051 1.85 1.97 2..09 2.21 2.32 2.54 2.84 3.12 3.29 3.66 3.96 3324-1001.35 3324-2001.35 5.0 1.35 .053 1.97 2.10 2.23 2.36 2.48 2.71 3.04 3.34 3.52 3.92 4.23 3324-1001.4 3324-2001.4 5.3 1.40 .055 2.09 2.23 2.37 2.50 2.63 2.89 3.23 3.55 3.74 4.16 4.49 3324-1001.45 3324-2001.45 5.6 1.45 .057 2.22 2.37 2.52 2.66 2.80 3.06 3.43 3.77 3.97 4.41 4.79 3324-1001.5 3324-2001.5 6.0 1.50 .059 2.34 2.50 2.66 2.81 2.96 3.24 3.63 3.99 4.20 4.66 5.02 Note: Capacity figures shown are with water at 70°F. There may be variations due to power supply, temperature, viscosity, additives, etc. 242 GPM 3324-1001.2 3324-1001.25 Orion® Flowmeters New digital technology converts fluid ion flow into gpm/lpm, virtually making mechanical flowmeters obsolete.These precise flowmeters work by utilizing sensors to relay pulse signals and converting them into gpm/lpm readings.The Visual-Flow flowmeter, with touch pad, displays instant flow reading for quantity of fluid filled. 2 3 1 1-Visual-Flow Flowmeter With Male Thread Adapters • No mechanical moving parts • Advanced technology at an affordable price • Performance independent from fluid density and viscosity • Low sensitivity to turbulence • Wide variety of flows for use in diverse applications • High precision, typical error is 0.5% • Pulse output is 0-12 volts, max. consumption of 300 mA (milliamps) • Accuracy and precision saves chemical throughout the life of the system • Working pressure up to 580 psi (40 bar) • Integrates with existing rate controllers • AMP® Super Seal™ connection Part Number Part Number Flow (GPM) Flow (L/min) Size Max PSI Max BAR 4621BA01313 4621BA11313 4621BA41414 4622BA51616 4622BA61717 464622BA51616 464622BA61717 0.13 -2.6 0.3 - 5 2.6 - 53 5 - 106 8 - 158 .5-10 1-20 10-200 20-400 30-600 3/4" 3/4" 1" 1-1/2" 2" 290 290 290 290 290 20 20 20 20 20 Available for order through HYPRO-EU only (Cambridge, UK) 2-Orion Flowmeter With Male Thread Adapters Part Number Part Number Flow (GPM) Flow (L/min) Size Max PSI Max BAR 4621AA11313 4621AA31414 4621AA41414 4621AA41515 4622AA51616 4622AA61717 464622AA51616 464622AA61717 .3 - 5 1.4 - 26 2.6 - 53 2.6 - 53 5 - 106 8 - 158 1-20 5-100 10-200 10-200 20-400 30-600 3⁄4" 1" 1" 1-1⁄4" 1-1⁄2" 2" 290 290 290 290 290 290 20 20 20 20 20 20 Available for order through HYPRO-EU only (Cambridge, UK) 3-Orion Flowmeter Only Part Number Part Number Flow (GPM) Flow (L/min) Max PSI Max BAR Adapter Series 4621AA10000 4621AA20000 4621AA30000 4621AA40000 4622AA40000 4622AA50000 464621AA10000 464621AA20000 464621AA30000 464621AA4000 - 0.3 - 5 0.6 - 13 1.3 - 26 2.6 - 53 2.6 - 53 5 - 106 1-20 2-50 5-100 10-200 10-200 20-400 580 580 580 580 580 580 40 40 40 40 40 40 463 463 463 463 473 473 Bolt Kit, V1M258-FM, includes stainless steel bolts, washers and lock nuts. Available for order through HYPRO-EU only (Cambridge, UK) Adapter Cables AE2650 AE2651 AE2652 AE2654 Reference Number A B C D 4622BA50000-100 * 4 pin, 10’ extension cable (Visual-Flow)* 4622BA50000-200 * 4 pin cable w/pump stop unit (Visual-Flow)* 4621AA10000-100 * 3 pin, 10’ extension cable (Orion)* Part Number A Description Orion to Raven® (Conxall®) Orion to TeeJet® (Deutsch®) Orion to John Deere (Packard®) Orion to MidTech (Packard Weather Pack®) B C *Not shown. Orion® is a registered trademark of ARAG. Raven® is a registered trademark of Raven Industry Conxall® is a registered trademark of Conxall Corp. TeeJet® is a registered trademark of Spraying Systems Co. Packard® is a registered trademark of Delphi Packard Weather Pack® is a registered trademark of Delphi D 243 ACCESSORIES–MEASUREMENT COMPONENTS Measurement Components ARAG Sprayer Control Valves ® Electric Proportional Spray Control Valves Part Number Part Number Series Max.GPM* Max.PSI* 463020 8630020S 8630024S 8630D24S 46463020 46463024 - 863 863 863 863 12 12 12 12 580 580 580 580 Open to Close 14 seconds 7 seconds 14 seconds 14 seconds Outlet Size ¾" HB ¾" HB ¾" HB ¾" HB * Max GPM per valve section. Available for order through HYPRO-EU only (Cambridge, UK) Electric 3-Wire Boom Section Valve Part Number Series Max.GPM* Max.PSI* 8630001 8630011** 463/863 463/863 12 12 290 290 Open to Close 0.6 seconds 0.6 seconds Outlet Size 1/2" HB ¾" HB * Max GPM per valve section. **Includes bypass port. Part Number Part Number Series Max.GPM* Max.PSI* Outlet Size 473070 46473070 473 31 580 1¼" HB * Max GPM per valve section. Available for order through HYPRO-EU only (Cambridge, UK) Manual Pressure Regulating Valves Part Number Series Max.GPM* Max.PSI* Outlet Size 463080N 463 12 290 ¾" HB * Max GPM per valve section. Manual Boom Section Valves Part Number Part Number Series Max.GPM* Max.PSI* Metered Bypass Outlet Size 463051 463061 46463051 46463061 463 463 12 12 290 290 No Yes ¾" HB ¾" HB Outlet Size 1⁄2” HB 3⁄4” HB 1⁄2” HB 1⁄2” HB 1⁄2” HB ** Regulator No No No Yes No Yes * Max GPM per valve section. Available for order through HYPRO-EU only (Cambridge, UK) Series 461 - Economic Manual Valve Assemblies Part Number 461031-1 461031-2 461031-3 461031-4 461021-1 9950-0030 Valves* 3 3 3 3 2 3 Max.GPM* 12 12 12 12 12 12 Max.PSI* 290 290 290 290 290 290 Inlet Size 1” HB 1” HB 1⁄2” HB 1” HB 1” HB ** *Includes flynut inlet and hose barb outlets in sizes indicated. **Supplied with 3/4” elbow HB, 3/4” straight HB and 1/2” straight HB inlets and 3/4” FNPT, 3/4” HB, 1/2” HB and 3/8” HB outlets. Arag® is a registered trademark of ARAG. Hypro® is a registered trademark of Pentair. 244 Electric Proportional Spray Control Valves Part Number Max.GPM Max.PSI 3470-0104 26 580 Open to Close 7 seconds Outlet Size Outlet port sold separately (See below) Electric 3-Wire Boom Section Valves Part Number Max.GPM Max.PSI 3470-0106 12 290 Open to Close 0.2 seconds 3470-0101 12 290 0.2 seconds Metered Bypass Outlet Size Yes Outlet port sold separately (See below) No Outlet port sold separately (See below) Manual Proportional Spray Control Valves Part Number Max.GPM Max.PSI Outlet Size 3470-0103 26 580 3/4" HB Manual Pressure Regulating Valves Part Number Max.GPM Max.PSI Outlet Size 3470-0102 26 290 Outlet port sold separately (See below) Part Number Max.GPM Max.PSI Outlet Size 3470-0107 12 290 Outlet port sold separately (See below) Manual Boom Section Valves Outlet Ports for Valves Part Number Max.GPM Max.PSI Outlet Size 3470-0206 12 290 3/8" HB 3470-0201 12 290 1/2" HB 3470-0202 12 290 3/4" HB 3470-0204 12 290 1" HB 3470-0203 12 290 3/4" FNPT 3470-0207 12 290 1/2" HB-90º Elbow 245 ACCESSORIES–SPRAYER CONTROLS HYPRO Sprayer Control Valves ® HYPRO Sprayer Control Valves ® Replacement Clips & O-rings 1 2 3 Part Number Description 3470-0208 Replacement O-ring 3470-0209 Replacement clip Valve Inlet Male Adapters Part Number Description Ref # 3470-0305 Adapter Female Side Male 3/4" BSP - 3470-0306 Adapter Female Side Male 1" BSP - 3470-0307 Adapter Male Side Male 3/4" BSP - 3470-0308 Adapter Male Side Male 1" BSP - 3470-0301 Adapter Female Side Female 3/4" NPT 1 3470-0302 Adapter Female Side Female 1" NPT 1 3470-0401 Adapter Male Side Female 3/4" NPT 2 3470-0402 Adapter Male Side Female 1" NPT 2 3470-0403 Male End Cap 3 3470-0303 Female End Cap 3 Bolts, Kits and Mounting Brackets Part Number Description 3470-0601 3470-0605 3470-0603 3470-0602 3470-0604 1 Section stainless steel 2 Section stainless steel 3 Section stainless steel 4 Section stainless steel 5 Section stainless steel 246 Metered Bypass Manifolds Part Number Description 3470-0500 3 Section Metered Bypass Parts Part Number Description 3470-0900 Cap 3470-0901 Clip Flanged Line Strainer Part Number Description 3470-0800 Self Cleaning, 50 Mesh Replacement Screens for Flanged Line Strainer Part Number Description 3470-0801 50 Mesh Part Number Description 3470-0700 3470-0708 3470-0702 2 wire- 4' cable w/ gasket and screw 3 wire- 4' cable w/ gasket and screw Din connector w/ gasket and screw Cables 247 ACCESSORIES–SPRAYER CONTROLS HYPRO Sprayer Control Valves ® Ball Valves • Fiberglass-reinforced polypropylene body for strength and chemical resistance • Teflon seats for smooth operation and proper sealing characteristics • EPDM O-rings to handle most fertilizers and chemicals • Max. operating pressure for sizes up to 1-1⁄4" – 232 PSI (16 bar). For 1-1⁄2" and 2" – 145 PSI (10 bar). Single Union Ball Valves - 2 Way NPT Part Number BSP Part Number 9951-2050N 9951-2075N 9951-2100N 9951-2125N 9951-2150N 9951-2200N 9951-2050B 9951-2075B 9951-2100B 9951-2125B 9951-2150B 9951-2200B Part Number Size Mounting Inserts Max PSI Max BAR 56454132 56454133 56454134 56454135 56454136 56454137 1⁄2" 3⁄4" 1" 1-1⁄4" 1-1⁄2" 2" None None None 8 mm 8 mm 8 mm 232 232 232 145 145 145 16 16 16 10 10 10 Part Number Size Mounting Inserts Max PSI Max BAR 56454232 56454233 56454234 56454235 56454236 56454237 1⁄2" 3⁄4" 1" 1-1⁄4" 1-1⁄2" 2" None None None 8 mm 8 mm 8 mm 232 232 232 145 145 145 16 16 16 10 10 10 Available for order through HYPRO-EU only (Cambridge, UK) Single Union Ball Valves - 3 Way NPT Part Number BSP Part Number 9951-3050N 9951-3075N 9951-3100N 9951-3125N 9951-3150N 9951-3200N 9951-3050B 9951-3075B 9951-3100B 9951-3125B 9951-3150B 9951-3200B Available for order through HYPRO-EU only (Cambridge, UK) Anti-Backflow Valves Part Number MBSP x MBSP Length 5042015 5042016 5042017 5042019 1-1/4" x 1-1/4" 1-1/2" x 1-1/2" 2" x 2" 3" x 3" 4.13" / 105 mm 4.37" / 111 mm 4.96" / 126 mm 6.02" / 153 mm Check Valves Part Number MNPT x MNPT Material Cracking Pressure PSI Cracking Pressure BAR 3320-0065 1⁄2" X 1⁄2"" Polypropylene 3 .20 Shut-Off Valves Part Number MGHT (inlet) x MGHT Material 3305-0112 1⁄2" X 1⁄2"" Polypropylene Garden Hose Shut-Off Valve Part Number LA5 LA24 FGHT (inlet) x MGHT 3/4" X 3/4" 3/4" X (2) 3/4" Type Description Max. PSI Max BAR 1-Way 2-Way Cycolac body and ball with Buna-N seals suitable for outdoor use 75 75 5 5 Polypropylene Ball Valve Part Number Size Max. PSI* Max. BAR Material 15-14 1/4" X 1/4" 25 3.4 Polypropylene *Max psi for liquids compatible with polypropylene and EPDM. 248 O-ring Material EPDM Series 90 – Plated Brass Ball Valve Part Number Size Handle Type 90FFB18 90FFB14 90FMB14 90FFB38 90FMB38 90FFB12 90FMB12 90FFL18 90FFL14 90FML14 90FFL38 90FML38 90FFL12 90FML12 90-HBF RI167 1⁄8" FNPT X 1⁄8" FNPT 1⁄4" FNPT X 1⁄4" FNPT 1⁄4" FNPT X 1⁄4" MNPT 3⁄8" FNPT X 3⁄8" FNPT 3⁄8" FNPT X 3⁄8" MNPT 1⁄2" FNPT X 1⁄2" FNPT 1⁄2" FNPT X 1⁄2" MNPT 1⁄8" FNPT X 1⁄8" FNPT 1⁄4" FNPT X 1⁄4" FNPT 1⁄4" FNPT X 1⁄4" MNPT 3⁄8" FNPT X 3⁄8" FNPT 3⁄8" FNPT X 3⁄8" MNPT 1⁄2" FNPT X 1⁄2" FNPT 1⁄2" FNPT X 1⁄2" MNPT Max PSI Max BAR Butterfly 300 20 Butterfly 300 20 Butterfly 300 20 Butterfly 300 20 Butterfly 300 20 Butterfly 300 20 Butterfly 300 20 Lever 300 20 Lever 300 20 Lever 300 20 Lever 300 20 Lever 300 20 Lever 300 20 Lever 300 20 Replacement nylon butterfly handle Replacement nylon lever handle Max. Temp US Units Metric Units 212° F 100º C 212° F 100º C 212° F 100º C 212° F 100º C 212° F 100º C 212° F 100º C 212° F 100º C 212° F 100º C 212° F 100º C 212° F 100º C 212° F 100º C 212° F 100º C 212° F 100º C 212° F 100º C Full Port Brass and 316 Stainless Steel Ball Valves Gauges Part Number Material Size Max PSI Max Bar 171N-14 171N-38 171N-12 171N-34 171N-100 171N-114 171N-112 171N-200 78-14 78-38 78-12 78-34 78-100 78-114 78-112 78-200 78-300 Brass Brass Brass Brass Brass Brass Brass Brass 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 1⁄4" FNPT 3⁄8" FNPT 1⁄2" FNPT 3⁄4" FNPT 1" FNPT 11⁄4" FNPT 11⁄2" FNPT 2" FNPT 1⁄4" FNPT 3⁄8" FNPT 1⁄2" FNPT 3⁄4" FNPT 1" FNPT 11⁄4" FNPT 11⁄2" FNPT 2" FNPT 3" FNPT 600 600 600 600 600 600 600 600 1000 1000 1000 1000 1000 1000 1000 1000 1000 41 41 41 41 41 41 41 41 69 69 69 69 69 69 69 69 69 Max. Temp. US Units Metric Units 320° F 160º C 320° F 160º C 320° F 160º C 320° F 160º C 320° F 160º C 320° F 160º C 320° F 160º C 320° F 160º C 320° F 160º C 320° F 160º C 320° F 160º C 320° F 160º C 320° F 160º C 320° F 160º C 320° F 160º C 320° F 160º C 320° F 160º C 10-32 threaded mounting holes. Teflon seals and o-rings. Dual-Scale Glycerin-Filled 2-1/2" Gauges (Stainless Steel Case) This series is designed for use with air, gas, oil, and water or any medium not corrosive to brass or bronze. Liquid-filled gauges are recommended for reducing shock waves caused by pressure or vibration fluctuations. Order Information • Movement: Brass • Bourdon Tube: Phosphor bronze • Pointer: Black-enameled aluminum • Dial: White background • Window: Acrylic • Liquid Fill: 99.5% pure virgin Glycerin • Connection: 1⁄4" NPT Brass connection • Accuracy: ASME/ANSI B40.1 Grade B (3-2-3%) Part Number Pressure Reading Range 2640-0009 2640-0010 2640-0011 2640-0007 2640-0008 2640-0001 2640-0002 2640-0003 2640-0004 2640-0005 2640-0014 0-60 psi/4 BAR 0-100 psi/7 BAR 0-200 psi/14 BAR 0-300 psi/21 BAR 0-600 psi/42 BAR 0-1000 psi/70 BAR 0-1500 psi/105 BAR 0-2000 psi/140 BAR 0-3000 psi/210 BAR 0-5000 psi/350 BAR 0-10000 psi/700 BAR 249 Face Size US Units Metric Units 2-1⁄2" 65 mm Stem Size 1⁄4" NPT (M) Estimated Weight Ea. US Units Metric Units 7.5 oz. 213 g ACCESSORIES–VALVES/GAUGES Ball Valves Gauges SG Series Dry 1-1⁄2", 2", 2-1⁄2" and 4" Gauges Order Information Part Number SG601.58C SG1001.58C SG1601.58C SG2001.58C SG602C SG1002C SG1602C SG2002C SG3002C SG152 SG302 SG602 SG1002 SG1602 SG2002 SG3002 SG15 SG30 SG60 SG100 SG160 SG200 SG300 SG400 SG600 SG1000 SG2000 SG3000 SG5000 SG604 SG1004 SG2004 PSI only Plastic case This series is designed for use with air, gas, oil, and water or any medium not corrosive to brass or bronze. • Movement: Brass • Bourdon Tube: C Shaped in copper alloy up to 600 psi and Helical in phosphor bronze over 600 psi • Pointer: Black-enameled aluminum • Dial: White aluminum • Window: Acrylic • Connection: 1⁄8" NPT male standard on 1-1⁄2" size 1⁄4" NPT standard on 2", 2-1⁄2", & 4" sizes • Accuracy: ASME/ANSI B40.1 Grade B (3-2-3%) GG Series Glycerin-Filled 2-1⁄2" and 4" Gauges PSI Range 0-60 0-100 0-160 0-200 0-60 0-100 0-160 0-200 0-300 0-15 0-30 0-60 0-100 0-160 0-200 0-300 0-15 0-30 0-60 0-100 0-160 0-200 0-300 0-400 0-600 0-1000 0-2000 0-3000 0-5000 0-60 0-100 0-200 Dial Size Stem Size 1-1⁄2" 1 2" 1 ⁄8" CBM ⁄4" CBM 2" 1 ⁄4" LM 2-1⁄2" 1 ⁄4" LM 4" 1 ⁄4" LM Order Information PSI only 304 Stainless Steel Case This series is designed for use with air, gas, oil, and water or any medium not corrosive to brass or bronze. Liquid-filled gauges are recommended for reducing shock waves caused by pressure or vibration fluctuations. • Movement: Brass • Bourdon Tube: Phosphor bronze • Pointer: Black-enameled aluminum • Dial: White background • Window: Acrylic • Liquid Fill: 99.5% pure virgin Glycerin • Connection: 1⁄4" NPT Brass connection • Accuracy: ASME/ANSI B40.1 Grade B (3-2-3%) 250 Part Number PSI Range WGG60C WGG100C WGG160C WGG200C WGG300C WGG400C WGG600C WGG1000C WGG1500C WGG2000C WGG3000C WGG5000C WGG6000C GG30 GG60 GG100 GG160 GG200 GG300 GG400 GG600 GG1000 GG1500 GG2000 GG3000 GG4000 GG5000 GG6000 GG10000 GG15000 VGG30 VGG3030 VGG3060 VGG30160 GG604 GG1004 VGG30604 0-60 0-100 0-160 0-200 0-300 0-400 0-600 0-1000 0-1500 0-2000 0-3000 0-5000 0-6000 0-30 0-60 0-100 0-160 0-200 0-300 0-400 0-600 0-1000 0-1500 0-2000 0-3000 0-4000 0-5000 0-6000 0-10000 0-15000 VAC / 30 Hg 0-30 psi / 30 Hg 0-60 psi / 30 Hg 0-160 psi / 30 Hg 0-60 0-100 0-60 psi / 30 Hg Dial Size Stem Size 2-1⁄2" 1⁄4" CBM & U-clamp 2-1⁄2" 1⁄4" LM 2-1⁄2" 1⁄4" LM 2-1⁄2" 1⁄4" LM 4" 1⁄4" LM 4" 1⁄4" LM ASG Series Dry 2-1⁄2" and 4" Gauges for Ammonia 2-1/2" and 4" Gauges Single Scale - PSI only Enameled steel case Order Information Part Number PSI Range Dial Size Stem Size ASG60 ASG160 ASG400 ASG604 ASG1604 ASG4004 0-60 0-160 0-400 0-60 0-160 0-400 2-1⁄2" 2-1⁄2" 2-1⁄2" 4" 4" 4" 1⁄4" LM 1⁄4" LM 1⁄4" LM 1⁄4" LM 1⁄4" LM 1⁄4" LM Part Number PSI Range Dial Size Stem Size WGGSS100C WGGSS400C WGGSS60 WGGSS100 WGGSS160 WGGSS400 WGGSS600 WGGSS1000 WGGSS3000 WGGSS5000 0-100 0-400 0-60 0-100 0-160 0-400 0-600 0-1000 0-3000 0-5000 2-1⁄2" 1⁄4" CBM 2-1⁄2" 1⁄4" LM Replacement lens AF available. This series is designed especially for use with ammonia. • Movement: Stainless Steel tube • Bourdon Tube: 316 Stainless Steel • Pointer: Black-enameled aluminum • Dial: White background • Window: Polycarbonate • Connection: 1⁄4" NPT Standard • Accuracy: ASME/ANSI B40.1 Grade B (3-2-3 %) WGGSS Series Glycerin-Filled 2-1⁄2" Gauges Order Information PSI only This series is designed for use with air, gas, oil, and water or any medium not corrosive to stainless steel. Liquid-filled gauges are recommended for reducing shock waves caused by pressure or vibration fluctuations. • Movement: Stainless Steel • Bourdon Tube: 316 Stainless Steel • Pointer: Black-enameled aluminum • Dial: White background • Window: Polycarbonate • Liquid Fill: 99.5% pure virgin Glycerin • Connection:1⁄4" NPT Stainless Steel connection 2-1⁄2" gauges • Accuracy: 2-1⁄2" - ASME/ANSI B40.1 Grade A (2-1-2 %) Accessories 1 Order Information 2 3 Reference Number Part Number Description 1 2 3 MF1814B B301AB 3470-0205 Reducing Coupler 1⁄4" FNPT x 1⁄8" MNPT 1⁄4" Gauge Dampener Universal Isolator Kit 251 ACCESSORIES–GAUGES Gauges Universal Flanged Clamps • Clamshell designed delivers superior durability and sealing capability through an even clamping pressure around Universal Flange joints • GTX polymer delivers superior chemical resistance and strength • Captured bolt and nut design allows for ease of assembly and maintenance, with 10mm socket or nut driver • Servicable design eliminates areas prone to collecting debris and excessive corrosion Size US Units Metric Units Fits Series Max. Operating Pressure at 70ºF at 21ºC 1” 25 mm 100 150 PSI 10 BAR 1.5” 38 mm 200 150 PSI 10 BAR 2” 51 mm 220 150 PSI 10 BAR 3” 76 mm 300 125 PSI 8.6 BAR UF Clamps w/ Stainless Steel Hardware Packaging Part Number 1 Clamp & 1 Gasket Clamp only 1 Clamp & 1 Gasket Clamp only 1 Clamp & 1 Gasket Clamp only 1 Clamp & 1 Gasket Clamp only Universal Flanged Gaskets BG-UFC0100E-A-S UFC0100-S BG-UFC0150E-A-S UFC0150-S BG-UFC0200E-A-S UFC0200-S BG-UFC0300E-A-S UFC0300-S • The gasket wraparound feature provides positive alignment of the adjoining fittings and allows visual inspection to be conducted during assembly • Provides sealing areas between fitting faces and outside diameter of flanged surfaces which increases the maximum pressure the joint can manage without leaks • Flow can be increased by as much as 16% as the new universal flanged gasket reduces protrusion into the joint Part Number Size US Units 1" 1.5" 2" 3" UFG0100E-A UFG0150E-A UFG0200E-A UFG0300E-A Fits Series 100 200 220 300 Metric Units 25 mm 38 mm 51 mm 76 mm Gasket Type EPDM EPDM EPDM EPDM Universal Flange Fittings and Valves Universal Flange Size Reference Hypro Part Number Series UF100 Not Available UF200 UF300 UF Series 100 200 220 300 US Units 1" 1.5" 2" 3" Metric Units 25 mm 38 mm 51 mm 76 mm Maximum Operating Pressure @ 70º F (21º C) 150 PSI (10 BAR) N/A 150 PSI (10 BAR) 125 PSI (8.5 BAR) Universal Flange Couplings Part Number Size Fit Series Description UF100 UF200 UF300 1" 2" 3" 100 220 300 Coupling, Flange Coupling, Flange Coupling, Flange Part Number Size Fit Series Description UF100L UF200L UF300L 1" 2" 3" 100 220 300 Elbow, Flange Elbow, Flange Elbow, Flange Part Number Size Fit Series Description UF100T UF200T UF300T 1" 2" 3" 100 220 300 Tee, Flange Tee, Flange Tee, Flange Max. Operating Pressure at 70ºF at 21ºC 150 PSI 10 BAR 150 PSI 10 BAR 125 PSI 8.6 BAR Universal Flange Elbows Universal Flange Tees 252 Max. Operating Pressure at 70ºF at 21ºC 150 PSI 10 BAR 150 PSI 10 BAR 125 PSI 8.6 BAR Max. Operating Pressure at 70ºF at 21ºC 150 PSI 10 BAR 150 PSI 10 BAR 125 PSI 8.6 BAR Universal Flange Crosses Part Number Size Fit Series Description UF100X UF200X UF300X 1" 2" 3" 100 220 300 Cross, Flange Cross, Flange Cross, Flange Max. Operating Pressure at 70ºF at 21ºC 150 PSI 10 BAR 150 PSI 10 BAR 125 PSI 8.6 BAR Universal Flange Reducing Coupling Part Number Size Fit Series Description UF200-RC100 UF300-RC200 2” x 1” 3” x 2” 220 x100 300 x220 Reducing Coupling Flange x Flange Reducing Coupling Flange x Flange Max. Operating Pressure at 70ºF at 21ºC 150 PSI 10 BAR 125 PSI 8.6 BAR Universal Flange x Hose Bar Part Number Size (UF X HB) Fit Series Description UF100-HB075 UF100-HB100 UF100-HB125 UF200-HB150 UF200-HB200 UF300-HB200 UF300-HB300 1" x 3/4" 1" x 1" 1" x 1-1/4" 2" x 1-1/2" 2" x 2" 3" x 2" 3" x 3" 100 100 100 220 220 300 300 Flange x HB Flange x HB Flange x HB Flange x HB Flange x HB Flange x HB Flange x HB Max. Operating Pressure at 70ºF at 21ºC 150 PSI 10 BAR 150 PSI 10 BAR 150 PSI 10 BAR 150 PSI 10 BAR 150 PSI 10 BAR 125 PSI 8.6 BAR 125 PSI 8.6 BAR Universal Flange Elbow x Hose Barbs Part Number Size (UF X HB) Fit Series Description UF100L-HB075 UF100L-HB100 UF100L-HB125 UF150L-HB125 UF200L-HB150 UF200L-HB200 UF300L-HB200 UF300L-HB300 1" x 3/4" 1" x 1" 1" x 1-1/4" 1" x 1.25" 2" x 1-1/2" 2" x 2" 3" x 2" 3" x 3" 100 100 100 150 220 220 300 300 Elbow, Flange x HB Elbow, Flange x HB Elbow, Flange x HB Elbow, Flange x HB Elbow, Flange x HB Elbow, Flange x HB Elbow, Flange x HB Elbow, Flange x HB Max. Operating Pressure at 70ºF at 21ºC 150 PSI 10 BAR 150 PSI 10 BAR 150 PSI 10 BAR 150 PSI 10 BAR 150 PSI 10 BAR 150 PSI 10 BAR 125 PSI 8.6 BAR 125 PSI 8.6 BAR Universal Flange x Hose Barb Tee Part Number Size (UF x FNPT) Fit Series Description UF100-HBT100 1" x 1" 100 Flange x HBT Max. Operating Pressure at 70ºF at 21ºC 150 PSI 10 BAR Universal Flange x Male Pipe Thread Part Number Size (UF X MNPT) Fit Series Description UF100-MN075 UF100-MN100 UF100-MN125 UF200-MN200 UF300-MN300 1" x 3/4" 1" x 1" 1" x 1-1/4" 2" x 2" 3" x 3" 100 100 100 220 300 Flange x MNPT Flange x MNPT Flange x MNPT Flange x MNPT Flange x MNPT Max. Operating Pressure at 70ºF at 21ºC 150 PSI 10 BAR 150 PSI 10 BAR 150 PSI 10 BAR 150 PSI 10 BAR 125 PSI 8.6 BAR Universal Flange x Female Pipe Thread Part Number Size (UF x FNPT) Fit Series Description UF100-FN100 UF200-FN200 1" x 1" 2" x 2" 100 220 Flange x FNPT Flange x FNPT Max. Operating Pressure at 70ºF at 21ºC 150 PSI 10 BAR 150 PSI 10 BAR Universal Flange x Male Camlock Adapter Part Number Size Fit Series Description UF200-MA200 UF300-MA300 2" x 2" 3" x 3" 220 300 Flange x Male Coupler Camlock Flange x Male Coupler Camlock Max. Operating Pressure at 70ºF at 21ºC 150 PSI 10 BAR 125 PSI 8.6 BAR Universal Flange Plug x Flange Part Number Size Fit Series Description UF100P UF200P UF300P UF100-FN025P 1" x 1" 2" x 2" 3" x 3" 1" w/ 1/4" FPT 100 220 300 100 Plug, Flange Plug, Flange Plug, Flange Plug, Flange w/FPT Max. Operating Pressure at 70ºF at 21ºC 150 PSI 10 BAR 150 PSI 10 BAR 125 PSI 8.6 BAR 150 PSI 10 BAR Universal Flange Bolted Ball Valves Part Number Size Fit Series Description 9951-2100UF 9951-2200UF 9951-2300UF 1" 2" 3" 100 220 300 Bolted Ball Valve with flange connections Bolted Ball Valve with flange connections Bolted Ball Valve with flange connections 253 Max. Operating Pressure at 70ºF at 21ºC 150 PSI 10 BAR 150 PSI 10 BAR 125 PSI 8.6 BAR ACCESSORIES–UNIVERSAL FLANGE PRODUCTS Universal Flange Fittings and Valves Hose Barb with Fly Nut & O-Ring Straight Hose Barb with Fly Nut and O-Ring Part Number FNAS-1212 FNAS-3412 FNAS-3458 FNAS-3434 FNAS-10012 FNAS-10034 FNAS-100100 FNAS-114100 FNAS-114114 FNAS-112100 FNAS-112114 FNAS-112112 FNAS-200200 O-Ring Groove x Hose Barb US Units 1⁄2 inch x 1⁄2 inch 3⁄4 inch x 1⁄2 inch 3⁄4 inch x 5⁄8 inch 3⁄4 inch x 3⁄4 inch 1 inch x 1⁄2 inch 1 inch x 3⁄4 inch 1 inch x 1 inch 1-1⁄4 inch x 1 inch 1-1⁄4 inch x 1-1⁄4 inch 1-1⁄2 inch x 1 inch 1-1⁄2 inch x 1- 1⁄4 inch 1-1⁄2 inch x 1-1/2 inch 2 inch x 2 inch Metric Units 13 mm x 13 mm 19 mm x 13 mm 19 mm x 16 mm 19 mm x 19 mm 25 mm x 13 mm 25 mm x 19 mm 25 mm x 25 mm 32 mm x 25 mm 32 mm x 32 mm 38 mm x 25 mm 38 mm x 32 mm 38 mm x 38 mm 50 mm x 50 mm O-Ring Groove x Hose Barb US Units 3⁄4 inch x 1⁄2 inch 3⁄4 inch x 5⁄8 inch 3⁄4 inch x 3⁄4 inch 1 inch x 3⁄4 inch 1 inch x 1 inch 1-1⁄4 inch x 1 inch 1-1⁄4 inch x 1-1⁄4 inch 1-1⁄2 inch x 1 inch 1-1⁄2 inch x 1-1⁄4 inch 1-1⁄2 inch x 1-1/2 inch 2 inch x 2 inch Metric Units 19 mm x 13 mm 19 mm x 16 mm 19 mm x 19 mm 25 mm x 19 mm 25 mm x 25 mm 32 mm x 25 mm 32 mm x 32 mm 38 mm x 25 mm 38 mm x 32 mm 38 mm x 38 mm 50 mm x 50 mm Elbow Hose Barb with Fly Nut and 0-Ring Part Number FNAE-3412 FNAE-3458 FNAE-3434 FNAE-10034 FNAE-100100 FNAE-114100 FNAE-114114 FNAE-112100 FNAE-112114 FNAE-112112 FNAE-200200 All assemblies include same size fly nut and o-ring. Blanking CAPS Fittings - Cam Locks Part Number CAP-BPS Threads 2102020 2102030 FNCAP-100 1⁄2" 3⁄4" 1" Stainless Steel and Polypropylene Cam Lock Couplings A. Male Adapter / Female Thread A Stainless Steel Coupling Size Thread Size NPT Poly BSP Poly BSP Poly A-750SS A-100SS A-150SS A-200SS A-300SS 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 2 inch 3 inch 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 2 inch 3 inch 9950-075NA 9950-100NA 9950-125NA 9950-150NA 9950-200NA 9950-300NA 9950-075BA 9950-100BA 9950-125BA 9950-150BA 9950-200BA 9950-300BA 02075A34 02100A10 02125A54 02150A64 02200A20 02300A30 A Available for order through HYPRO-EU only (Cambridge, UK) B. Female Coupler / Male Thread B Stainless Steel Coupling Size Thread Size NPT Poly BSP Poly BSP Poly B-750SS B-100SS B-150SS B-200SS B-300SS 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 2 inch 3 inch 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 2 inch 3 inch 9950-075NB 9950-100NB 9950-125NB 9950-150NB 9950-200NB 9950-300NB 9950-075BB 9950-100BB 9950-125BB 9950-150BB 9950-200BB 9950-300BB 02075B34 02100B10 02125B54 02150B64 02200B20 02300B30 B Available for order through HYPRO-EU only (Cambridge, UK) C. Female Coupler / Hose Fitting C Stainless Steel Coupling Size Barb Size Poly Poly C-750SS C-100SS C-150SS C-200SS C-300SS 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 2 inch 3 inch 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 2 inch 3 inch 9950-075C 9950-100C 9950-125C 9950-150C 9950-200C 9950-300C 02075C34 02100C10 02125C54 02150C64 02200C20 02300C30 Available for order through HYPRO-EU only (Cambridge, UK) 254 C ACCESSORIES–FITTINGS Fittings - Cam Locks Stainless Steel and Polypropylene Cam Lock Couplings D. Female Coupler / Female Thread D Stainless Steel Coupling Size Thread Size Poly BSP Poly BSP Poly D-750SS D-100SS D-150SS D-200SS D-300SS 3⁄4 inch 3⁄4 inch 1 inch 1-1/4 inch 1-1⁄2 inch 2 inch 3 inch 1⁄2 inch 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 2 inch 3 inch 18103D2N 9950-075ND 9950-100ND 9950-125ND 9950-150ND 9950-200ND 9950-300ND ––––––– 9950-075BD 9950-100BD 9950-125BD 9950-150BD 9950-200BD 9950-300BD 02050D12 02075D34 02100D10 02125D54 02150D64 02200D20 02300D30 D Available for order through HYPRO-EU only (Cambridge, UK) E. Male Adapter / Hose Fitting E Stainless Steel Coupling Size Hose Size Poly Poly E-750SS E-100SS E-150SS E-200SS E-300SS 3⁄4 inch 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 2 inch 3 inch 1⁄2 inch 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 2 inch 3 inch 18103E2 9950-075E 9950-100E 9950-125E 9950-150E 9950-200E 9950-300E 02050E12 02075E34 02100E10 02125E54 02150E64 02200E20 02300E30 E Available for order through HYPRO-EU only (Cambridge, UK) F. Male Adapter / Male Thread F Stainless Steel Coupling Size Thread Size Poly BSP Poly BSP Poly F-750SS F-100SS F-150SS F-200SS F-300SS 3⁄4 inch 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 2 inch 3 inch 1⁄2 inch 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 2 inch 3 inch 18103F2N 9950-075NF 9950-100NF 9950-125NF 9950-150NF 9950-200NF 9950-300NF ––––––– 9950-075BF 9950-100BF 9950-125BF 9950-150BF 9950-200BF 9950-300BF 02050F12 02075F34 02100F10 02125F54 02150F64 02200F20 02300F30 F Available for order through HYPRO-EU only (Cambridge, UK) G. Plug G Stainless Steel Coupling Size Poly Poly DP-750SS DP-100SS DP-150SS DP-200SS DP-300SS 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 2 inch 3 inch 9950-075G 9950-100G 9950-125G 9950-150G 9950-200G 9950-300G 02075G34 02100G10 02150G64 02200G20 02300G30 G Available for order through HYPRO-EU only (Cambridge, UK) H. Cap H Stainless Steel Coupling Size Poly Poly DC-750SS DC-100SS DC-150SS DC-200SS DC-300SS 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 2 inch 3 inch 9950-075H 9950-100H 9950-125H 9950-150H 9950-200H 9950-300H 02075P34 02100P10 02150P64 02200P20 02300P30 Available for order through HYPRO-EU only (Cambridge, UK) Cam Lock Replacement Gasket Size EPDM Part Number EPDM Part Number Viton Part Number 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 2 inch 3 inch 18103B-050 18104B-050 18105B-050 18106B-050 18107B-050 18109B-050 02--050G 02--100G – 02--150G 02--200G 02--300G 18123B-050 18124B-050 18125B-050 18126B-050 18127B-050 18129B-050 Available for order through HYPRO-EU only (Cambridge, UK) 255 ® H Nylon and Polypropylene Fittings ® Supplemental Technical Information on Nylon and Polypropylene Fittings NYLON FITTINGS POLYPROPYLENE FITTINGS Working Pressure: Working Pressure: At very low pressures, temperatures can approach 175ºF (80º C) with no degradation in the performance of the nylon fitting. As with all thermoplastics, an increase in working temperature is accompanied by a decrease in acceptable operating pressure. At 140ºF (60ºC), the working pressure limit is 90 psi (6 bar). Recommended: • For physical or structural strength • For broad temperature range • With PTFE tape Recommended: • Hand tight, plus 1 turn • For normal ag growing season conditions • For acid resistance • For Sunlight/UV resistance • For cosmetic appearance Not Recommended: • Acid-based fertilizers/defoliants • Prolonged sunlight/UV exposure Not Recommended: • Impact wrench, other over tightening • For temperature extremes • With PTFE tape • For toluene or xylene-based compounds up to 150 psi (10 bar) at ambient temperatures. up to 150 psi (10 bar) at ambient temperatures Chemical Resistance Chemical Most Agricultural Chemicals Acidic Fertilizers Ammonium Compounds Aromatic Hydrocarbons Bromine Calcium Carbonate Carbon Tetrachloride Chlorine Detergents Diesel Fuel Ethanol Fluorine Gasoline Hexane Hydrochloric Acid Iodine Kerosene Nylon Chemical Polypropylene Magnesium Sulfate Nitric Acid Oxalic Acid Phosphoric Acid Propionic Acid Most Sodium Compounds Sodium Hypochlorite Sulfuric Acid Toluene Trichloroethylene Xylene Zinc Sulfate Key Chemical Resistance: Consult Factory: Not Recomended: Nylon® is a registered trademark of Dupont Co. Hypro® is a registered trademark of Pentair. 256 Nylon Polypropylene Elbows: Male Pipe Thread By Hose Barb Male MNPT Pipe Thread By Hose Barb Std Pack MPT X HB Nylon Poly Std Pack MPT X HB 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 1 1 1 1 1 1 1 1 1⁄8 inch X 3⁄16 inch (4,7 mm) 1⁄8 inch X 1⁄4 inch (6,4 mm) 1⁄8 inch X 5⁄16 inch (8 mm) 1⁄8 inch X 3⁄8 inch (10 mm) 1⁄4 inch X 3⁄16 inch (4,7 mm) 1⁄4 inch X 1⁄4 inch (6,4 mm) 1⁄4 inch X 5⁄16 inch (8 mm) 1⁄4 inch X 3⁄8 inch (8 mm) 1⁄4 inch X 1⁄2 inch (13 mm) 3⁄8 inch X 1⁄4 inch (6,4 mm) 3⁄8 inch X 5⁄16 inch (8 mm) 3⁄8 inch X 3⁄8 inch (10 mm) 3⁄8 inch X 1⁄2 inch (13 mm) 3⁄8 inch X 5⁄8 inch (16 mm) 1⁄2 inch X 3⁄16 inch (4,7 mm) 1⁄2 inch X 1⁄4 inch (6,4 mm) 1⁄2 inch X 3⁄8 inch (10 mm) 1⁄2 inch X 1⁄2 inch (13 mm) 1⁄2 inch X 5⁄8 inch (16 mm) 1⁄2 inch X 3⁄4 inch (19 mm) 1⁄2 inch X 1 inch (25 mm) 3⁄4 inch X 1⁄4 inch (6,4 mm) 3⁄4 inch X 3⁄8 inch (10 mm) 3⁄4 inch X 1⁄2 inch (13 mm) 3⁄4 inch X 5⁄8 inch (16 mm) 3⁄4 inch X 3⁄4 inch (19 mm) 3⁄4 inch X 1 inch (25 mm) 1 inch X 3⁄4 inch (19 mm) 1 inch X 1 inch (25 mm) 1 inch X 11⁄4 inch (32 mm) 1-1⁄4 inch X 3⁄4 inch (19 mm) 1-1⁄4 inch X 1 inch (25 mm) 1-1⁄4 inch X 1-1⁄4 inch (32 mm) 1-1⁄4 inch X 1-1⁄2 inch (38 mm) 1-1⁄2 inch X 1-1⁄4 inch (32 mm) 1-1⁄2 inch X 1-1⁄2 inch (38 mm) 2 inch X 2 inch (50 mm) 3 inch X 3 inch (76mm) A18316 A1814 A18516 A1838 A14316 A14 A14516 A1438 A1412 A3814 A38516 A38 A3812 A3858 A12316 A1214 A1238 A12 A1258 A1234 A12100 A3414 A3438 A3412 A3458 A34 A34100 A10034 A100 A100114 A11434 A114100 A114 A114112 A112114 A112 A200 -- 3A18316 3A1814 – 3A1838 – 3A14 – 3A1438 3A1412 3A3814 3A38516 3A38 3A3812 3A3858 – 3A1214 3A1238 3A12 3A1258 3A1234 – 3A3414 3A3438 3A3412 3A3458 3A34 3A34100 3A10034 3A100 3A100114 3A11434 3A114100 3A114 3A114112 3A112114 3A112 3A200 3A300 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 1 1 1 1 1 1 1 1 1⁄8 inch X 3⁄16 inch (4,7 mm) 1⁄8 inch X 1⁄4 inch (6,4 mm) 1⁄8 inch X 5⁄16 inch (8 mm) 1⁄8 inch X 3⁄8 inch (10 mm) 1⁄4 inch X 3⁄16 inch (4,7 mm) 1⁄4 inch X 1⁄4 inch (6,4 mm) 1⁄4 inch X 5⁄16 inch (8 mm) 1⁄4 inch X 3⁄8 inch (10 mm) 1⁄4 inch X 1⁄2 inch (13 mm) 1⁄4 inch X 5⁄8 inch (8 mm) 3⁄8 inch X 1⁄4 inch (6,4 mm) 3⁄8 inch X 5⁄16 inch (8 mm) 3⁄8 inch X 3⁄8 inch (10 mm) 3⁄8 inch X 1⁄2 inch (13 mm) 3⁄8 inch X 5⁄8 inch (16 mm) 1⁄2 inch X 1⁄4 inch (6,4 mm) 1⁄2 inch X 3⁄8 inch (10 mm) 1⁄2 inch X 1⁄2 inch) (13 mm) 1⁄2 inch X 5⁄8 inch (16 mm) 1⁄2 inch X 3⁄4 inch (19 mm) 1⁄2 inch X 1 inch (25 mm) 3⁄4 inch X 1⁄4 inch (6,4 mm) 3⁄4 inch X 3⁄8 inch (10 mm) 3⁄4 inch X 1⁄2 inch (13 mm) 3⁄4 inch X 5⁄8 inch (16 mm) 3⁄4 inch X 3⁄4 inch (19 mm) 3⁄4 inch X 1 inch (25 mm) 1 inch X 1⁄2 inch (13 mm) 1 inch X 3⁄4 inch (19 mm) 1 inch X 1 inch (25 mm) 1 inch X 1 1/4 inch (32 mm) 1-1⁄4 inch X 3⁄4 inch (19 mm) 1-1⁄4 inch X 1 inch (25 mm) 1-1⁄4 inch X 11⁄4 inch (32 mm) 1-1⁄4 inch X 11⁄2 inch (38 mm) 1-1⁄2 inch X 11⁄2 inch (38 mm) 2 inch X 2 inch (50 mm) 3 inch X 3 inch (76mm) Nylon Poly EL18316 – EL1814 3EL1814 EL18516 – EL1838 3EL1838 – 3EL14316 EL14 3EL14 EL14516 – EL1438 3EL1438 EL1412 3EL1412 EL1458 – EL3814 3EL3814 EL38516 – EL38 3EL38 EL3812 3EL3812 EL3858 3EL3858 EL1214 3EL1214 EL1238 3EL1238 EL12 3EL12 EL1258 3EL1258 EL1234 3EL1234 EL12100 – EL3414 3EL3414 EL3438 3EL3438 EL3412 3EL3412 EL3458 3EL3458 EL34 3EL34 EL34100 3EL34100 EL10012 3EL10012 EL10034 3EL10034 EL100 3EL100 -3EL100114 EL11434 3EL11434 EL114100 3EL114100 EL114 3EL114 EL114112 3EL114112 EL112 3EL112 EL200 3EL200 -3EL300 Add Prefix “BG” for 1 part per retail bag. Elbows: Female Pipe Thread By Hose Barb Add Prefix “BG” for 1 part per retail bag. Female Pipe Thread By Hose Barb Std Pack FPT X HB Nylon Poly 25 25 25 25 25 25 25 25 25 25 25 25 25 25 1⁄4 inch X 1⁄4 inch (6,4 mm) 1⁄4 inch X 3⁄8 inch (10 mm) 3⁄8 inch X 1⁄4 inch (6,4 mm) 3⁄8 inch X 3⁄8 inch (10 mm) 3⁄8 inch X 1⁄2 inch (13 mm) 1⁄2 inch X 1⁄4 inch (6,4 mm) 1⁄2 inch X 3⁄8 inch (10 mm) 1⁄2 inch X 1⁄2 inch (13 mm) 1⁄2 inch X 5⁄8 inch (16 mm) 1⁄2 inch X 3⁄4 inch (19 mm) 3⁄4 inch X 3⁄8 inch (10 mm) 3⁄4 inch X 1⁄2 inch (13 mm) 3⁄4 inch X 5⁄8 inch (16 mm) 3⁄4 inch X 3⁄4 inch (19 mm) AF14 AF1438 AF3814 AF38 AF3812 AF1214 AF1238 AF12 AF1258 AF1234 AF3438 AF3412 – AF34 3AF14 3AF1438 3AF3814 3AF38 3AF3812 3AF1214 3AF1238 3AF12 3AF1258 3AF1234 3AF3438 3AF3412 3AF3458 3AF34 Std Pack FPT X HB Nylon Poly 25 25 25 25 25 25 25 25 25 25 25 25 1⁄4 inch X 3⁄16 inch (4,7 mm) 1⁄4 inch X 1⁄4 inch (6,4 mm) 1⁄4 inch X 3⁄8 inch (10 mm) 3⁄8 inch X 1⁄4 inch (6,4 mm) 3⁄8 inch X 3⁄8 inch (10 mm) 3⁄8 inch X 1⁄2 inch (13 mm) 1/2"inch X 1/2 inch (13mm) 1⁄2 inch X 5⁄8 inch (16 mm) 1⁄2 inch X 3⁄4 inch (19 mm) 3⁄4 inch X 1⁄2 inch (13 mm) 3⁄4 inch X 5⁄8 inch (16 mm) 3⁄4 inch X 3⁄4 inch (19 mm) – EL14F EL1438F EL3814F EL38F EL3812F -EL1258F EL1234F EL3412F EL3458F EL34F 3EL14316F 3EL14F 3EL1438F 3EL3814F 3EL38F 3EL3812F 3EL12F 3EL1258F 3EL1234F 3EL3412F 3EL3458F 3EL34F Street Elbows: Female Pipe Thread By Male Pipe Thread 257 Std Pack FPT X MPT Nylon Poly 25 25 25 25 10 1 1 1 1⁄4 inch X 1⁄4 inch 3⁄8 inch X 3⁄8 inch 1⁄2 inch X 1⁄2 inch 3⁄4 inch X 3⁄4 inch 1 inch X 1 inch 11⁄4 inch X 11⁄4 inch 11⁄2 inch X 11⁄2 inch 2 inch X 2 inch SE14 SE38 SE12 SE34 SE100 SE114 SE112 SE200 3SE14 3SE38 3SE12 3SE34 3SE100 3SE114 3SE112 3SE200 Add Prefix “BG” for 1 part per retail bag. Add Prefix “5BG” for 5 parts per retail bag. ACCESSORIES–FITTINGS Fittings - Plastic Street Elbows – 45° Std Pack MPT X FPT Nylon Poly 25 10 3⁄4 inch X 3⁄4 inch 1⁄4 inch X 1⁄4 inch SE3445 SE1445 3SE3445 – Nipples: Male Pipe Thread By Male Pipe Thread Elbows: Female Pipe Thread – 90° Std Pack FPT X FPT Nylon Poly 25 10 1 1 1 1 1⁄2 inch X 1⁄2 inch 3⁄4 inch X 3⁄4 inch 1 inch X 1 inch 11⁄4 inch X 11⁄4 inch 11⁄2 inch X 11⁄2 inch 2 inch X 2 inch LL12 LL34 LL100 LL114 LL112 LL200 3LL12 3LL34 3LL100 3LL114 3LL112 3LL200 Tees: Female Pipe Thread Std Pack FPT X FPT X FPT Nylon Poly 25 10 10 1 1 1 1 1⁄4 inch 1⁄2 inch 3⁄4 inch 1 inch 11⁄4 inch 11⁄2 inch 2 inch TT14 TT12 TT34 TT100 TT114 TT112 TT200 3TT14 3TT12 3TT34 3TT100 3TT114 3TT112 3TT200 FPT X FPT X FPT Nylon Poly 25 1 1⁄2 inch 3⁄4 inch GTT1214 GTT3414 3GTT1214 3GTT3414 Reducer Bushings MPT X FPT Nylon Poly 25 25 25 25 25 25 25 25 25 25 25 25 1 1 1 1 1 1 1 1 1 1 1 1⁄4 inch X 1⁄8 inch 3⁄8 inch X 1⁄8 inch 3⁄8 inch X 1⁄4 inch 1⁄2 inch X 1⁄8 inch 1⁄2 inch X 1⁄4 inch 1⁄2 inch X 3⁄8 inch 3⁄4 inch X 1⁄8 inch 3⁄4 inch X 1⁄4 inch 3⁄4 inch X 3⁄8 inch 3⁄4 inch X 1⁄2 inch 1 inch X 1⁄2 inch 1 inch X 3⁄4 inch 1-1⁄4 inch X 3⁄4 inch 1-1⁄4 inch X 1 inch 1-1⁄2 inch X 3⁄4 inch 1-1⁄2 inch X 1 inch 1-1⁄2 inch X 1-1⁄4 inch 2 inch X 3⁄4 inch 2 inch X 1 inch 2 inch X 1-1⁄4 inch 2 inch X 1-1⁄2 inch 2-1⁄2 inch X 2 inch 3 inch X 2 inch — RB3818 RB3814 RB1218 RB1214 RB1238 RB3418 RB3414 RB3438 RB3412 RB10012 RB10034 RB11434 RB114100 RB11234 RB112100 RB112114 RB20034 RB200100 RB200114 RB200112 RB212200 RB300200 3RB1418 3RB3818 3RB3814 3RB1218 3RB1214 3RB1238 3RB3418 3RB3414 3RB3438 3RB3412 3RB10012 3RB10034 3RB11434 3RB114100 3RB11234 3RB112100 3RB112114 3RB20034 3RB200100 3RB200114 3RB200112 — 3RB300200 Nylon Poly 1⁄8" X 1⁄8" 1⁄4" X 1⁄4" 3⁄8" X 3⁄8" 1⁄2" X 1⁄2" 3⁄4" X 3⁄4" 1" X 1" 1-1⁄4" X 1-1⁄4" 1-1⁄2" X 1-1⁄2" 2" X 2" 1⁄4" X 1⁄8" 3⁄8" X 1⁄8" 3⁄8" X 1⁄4" 1⁄2" X 1⁄8" 1⁄2" X 1⁄4" 1⁄2" X 3⁄8" 3⁄4" X 3⁄8" 3⁄4" X 1⁄2" 1" X 3/4" M18 M14 M38 M12 M34 M100 M114 M112 M200 M1418 M3818 M3814 M1218 M1214 M1238 M3438 M3412 -- 3M18 3M14 3M38 3M12 3M34 3M100 3M114 3M112 3M200 3M1418 3M3818 3M3814 – 3M1214 3M1238 3M3438 3M3412 3M10034 Std Pack FPT X FPT Nylon Poly 25 25 25 1 1 1 1⁄2" X 1⁄2" 3⁄4" X 3⁄4" 1" X 1" 1-1⁄4" X 1-1⁄4" 1-1⁄2" X 1-1⁄2" 2" X 2" FC12 FC34 FC100 FC114 FC112 FC200 3FC12 3FC34 3FC100 3FC114 3FC112 3FC200 Hex Plug with Male Pipe Thread Add Prefix “BG” for 1 part per retail bag. Std Pack MPT X MPT 25 25 25 25 25 25 1 1 1 25 25 25 25 25 25 25 25 1 Female Coupler Tees: Female Pipe Thread with 1⁄4 inch Gauge Port Std Pack Std Pack Std Pack MPT Nylon Poly 25 25 25 25 25 25 1 1 1 1⁄8" 1⁄4" 3⁄8" 1⁄2" 3⁄4" 1" 1-1⁄4" 1-1⁄2" 2" F18 F14 F38 F12 F34 F100 F114 F112 F200 3F18 3F14 3F38 3F12 3F34 3F100 3F114 3F112 3F200 Hose Barb Fittings Std Pack 25 25 25 25 25 25 25 25 25 25 1 1 1 Add Prefix “BG” for 1 part per retail bag. Add Prefix “5BG” for 5 parts per retail bag. 258 HB X HB US Units Metric Units 1⁄4”X 1⁄4“ 6,4 x 6,4 mm 3⁄8”X 1⁄4“ 10 x 6,4 mm 3⁄8”X 3⁄8“ 10 x 10 mm 1⁄2”X 1⁄4” 13 x 6,4 mm 1⁄2”X 3⁄4” 10 x 19 mm 1⁄2”X 1⁄2” 10 x 10 mm 5⁄8”X 5⁄8” 16 x 16 mm 3⁄4”X 5⁄8” 19 x 16 mm 3⁄4“X 3⁄4” 19 x 19 mm 1” X 1” 25 x 25 mm 1-1⁄4” X 1-1⁄4” 32 x 32 mm 1-1⁄2” X 1-1⁄2” 38 x 38 mm 2” X 2” 50 x 50 mm Nylon Poly EL14HB EL3814HB EL38HB EL1214HB EL1238HB EL12HB EL58HB EL3458HB EL34HB EL100HB EL114HB EL112HB EL200HB 3EL14HB 3EL3814HB 3EL38HB 3EL1214HB 3EL1238HB 3EL12HB 3EL58HB 3EL3458HB 3EL34HB – 3EL114HB 3EL112HB 3EL200HB Std Pack 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 1 1 1 HB X HB US Units Metric Units 1⁄8” x 1⁄8” 3,2 x 3,2 mm 1⁄4” x 3⁄16” 6,4 x 4,7 mm 1⁄4” x 1⁄4” 6,4 x 6,4 mm 1⁄4” x 1⁄4” 6,4 x 6,4 mm 5⁄16” x 5⁄16” 8 x 8 mm 3⁄8” x 1⁄4” 10 x 6,4 mm 3⁄8” x 3⁄8” 10 x 10 mm 1⁄2” x 1⁄4” 13 x 6,4 mm 1⁄2” x 3⁄8” 13 x 10 mm 1⁄2” x 3⁄8” 13 x 10 mm 1⁄2” x 1⁄2“ 13 x 13 mm 1⁄2” x 5⁄8” 13 x 16 mm 5⁄8” x 3⁄8” 16 x 10 mm 5⁄8” x 5⁄8” 16 x 16 mm 5⁄8” x 5⁄8” 16 x 16 mm 3⁄4” x 3⁄4” 19 x 19 mm 1”x 1” 25 x 25 mm 1-1⁄4” x 1-1⁄4” 32 x 32 mm 1-1⁄2” x 1-1⁄2” 38 x 38 mm 2” x 2” 50 x 50 mm Nylon Poly HM18* HM14316* SHM14 HM14* HM516* HM3814* SHM38 HM1214* SHM1238 HM1238* SHM12 SHM1258 HM5838* SHM58 HM58* SHM34 SHM100 SHM114 SHM112 SHM200 – – 3SHM14 3HM14* 3HM516* 3HM3814* 3SHM38 3HM1214* 3SHM1238 3HM1238* 3SHM12 3SHM1258 3HM5838* 3SHM58 — 3SHM34 3SHM100 3SHM114 3SHM112 3SHM200 *No centre stop as pictured, Tees: Hose Barbs Std Pack 2 3 1 25 25 25 25 25 25 25 25 25 25 25 25 1 1 1 HB X HB (1 X 2,3) US Units Metric Units 1⁄8” X 1⁄8” 3,2 x 3,2 mm 1⁄4” X 1⁄4” 6,4 x 6,4 mm 1⁄4” X 3⁄8” 6,4 x 10 mm 3⁄8” X 3⁄8” 10 x 10 mm 3⁄8” X 1⁄2” 10 x 13 mm 3⁄8“ X 5⁄8” 10 x 16 mm 1⁄2” X 3⁄8” 13 x 10 mm 1⁄2” X 1⁄2” 13 x 13 mm 5⁄8” X 5⁄8” 16 x 16 mm 3⁄4” X 1⁄2” 19 x 13 mm 3⁄4” X 3⁄4” 19 x 19 mm 1” X 1” 25 x 25 mm 1-1⁄4” X 1-1⁄4” 32 x 32 mm 1-1⁄2” X 1-1⁄2” 38 x 38 mm 2 “ X 2” 50 x 50 mm Nylon Poly T18 T14 T1438 T38 T3812 T3858 T1238 T12 T58 T3412 T34 T100 T114 T112 T200 – 3T14 3T1438 3T38 3T3812 – 3T1238 3T12 3T58 3T3412 3T34 3T100 3T114 3T112 3T200 2 3 1 MPT X HB (1 X 2,3) Nylon Poly 1⁄8 “ X 1⁄4 “ (6.4 mm) 1⁄4 “ X 1⁄4 “ (6.4 mm) 1⁄4” X 3⁄8” (16 mm) 1⁄4” X 1⁄2” (13 mm) 3⁄8” X 1⁄4” (6.4 mm) 3⁄8” X 3⁄8 ” (10 mm) 3⁄8” X 1⁄2” (13 mm) 1⁄2” X 3⁄8” (10 mm) 1⁄2” X 1⁄2” (13 mm) 1⁄2” X 5⁄8” (16 mm) 1⁄2” X 3⁄8 ” (19 mm) 3⁄4” X 3⁄8 ” (10 mm) 3⁄4” X 1⁄2” (13 mm) 3⁄4” X 5⁄8” (16 mm) 3⁄4” X 3⁄4” (19 mm) 3⁄4” X 1” (25 mm) T1814T T14T T1438T T1412T T3814T T38T T3812T T1238T T12T T1258T T1234T – T3412T – T34T T34100T – 3T14T 3T1438T – – 3T38T 3T3812T 3T1238T 3T12T – 3T1234T 3T3438T 3T3412T 3T3458T 3T34T – 3 Std Pack 25 FPT X HB (1 x 2 & 3) Nylon Poly 3⁄4" X 3⁄4" (19 mm) T34F 3T34F 1 Male Garden Hose Thread By Hose Barb Std Pack 25 25 25 25 25 25 MGHT X HB Nylon Poly 3⁄4" X 1⁄4" (6.4 mm) 3⁄4" X 3⁄8" (10 mm) 3⁄4" X 1⁄2" (13 mm) 3⁄4" X 5⁄8" (16 mm) 3⁄4" X 3⁄4" (19 mm) 3⁄4" X 1" (25 mm) D3414 D3438 D3412 D3458 D34 D34100 – 3D3438 3D3412 3D3458 3D34 – Add Prefix ''BG-" for 1 part per retail bag Elbows: Male Garden Hose Thread By Hose Barb Std Pack 25 25 25 25 25 MGHT X HB Nylon Poly 3⁄4" X 1⁄4" (6.4 mm) 3⁄4" X 3⁄8" (10 mm) 3⁄4" X 1⁄2" (13 mm) 3⁄4" X 5⁄8" (16 mm) 3⁄4" X 3⁄4" (19 mm) ELD3414 ELD3438 ELD3412 ELD3458 ELD34 3ELD3414 3ELD3438 3ELD3412 – 3ELD34 Adapters: Male Garden Hose Thread By Male Pipe Thread Std Pack MGHT X MPT Nylon Poly 25 25 25 3⁄4" X 3⁄8" 3⁄4" X 1⁄2" 3⁄4" X 3⁄4" E3438 E3412 E34 3E3438 3E3412 3E34 Adapter Couplings: Female Garden Hose Thread By Female Pipe Thread Std Pack 25 Tees: Male Pipe Thread By Hose Barbs Std Pack 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 Tees: Hose Barb By Female Pipe Thread 2 FGHT X FPT Nylon Poly 3⁄4" X 1⁄2" J3412 3J3412 Adapters: Female Garden Hose Thread By Male Pipe Thread Std Pack 25 FGHT X MPT Nylon Poly 3⁄4" X 3⁄4" H34 3H34 Adapters: Male Garden Hose Thread By Female Pipe Thread Std Pack 25 25 25 259 MGHT X FPT Nylon Poly 3⁄4" X 1⁄2" 3⁄4" X 1⁄4" 3⁄4" X 3⁄4" G3412 G3414 G34 3G3412 3G3414 3G34 ACCESSORIES–FITTINGS Hose Mender Washers Adapters: Flat Seat by Male Pipe Thread Std Pack MPT Nylon Poly 25 1⁄2" C12NPT 3C12NPT 1 FGHT X MGHT Nylon Poly 25 3⁄4" X 3⁄4" I34 3I34 Female Garden Hose Cap Knurled FGHT Nylon Poly 25 3⁄4" N34 3N34 2 100 3 100 OD X ID Description Part Number 1" X 3⁄4" Black Vinyl S.S. Filter 50/60 1" X 5⁄8" Mesh Natural 1" X 1⁄2" Polypropylene t W160M W405P 3 A/C Std Pack Std Pack 100 2 Adapters: Female Garden Hose Thread By Male Garden Hose Thread Std Pack Reference # 1 Rope Wick Parts Unassembled Std Pack 25 25 25 Description Nylon Poly 3⁄4" MGHT X 3⁄4" MPT (A) 3⁄4" FGHT Nut with 1⁄2" hole (B) 3⁄4" MGHT X 1⁄2" MPT (C) E34 B3412 E3412 3E34 3B3412 3E3412 Female Pipe Thread By Hose Barb Fitting Std Pack FPT X HB Nylon Poly 25 50 1/2” X 1/2” (13 mm) 1⁄4” X 1⁄4” (6,4 mm) Q12 Q14 3Q12 3Q14 A B Female Pipe Straight Swivel Nut–Hex Std Pack FPS Nylon Poly 25 1" B100 3B100 C D Female Garden Hose and Female Pipe Straight Swivel Nut–Knurled Rope Wick Parts Unassembled Ref. Letter A B C D E F Std Pack 100 50 100 100 25 25 Description Nylon Poly Nylon Washer Main Body O-ring Black EPDM Grommet Black EPDM 1-1⁄16" - 16 UN (Lock) Nut 1-1⁄16" - 16 UN Swivel Nut RW1116A RW1116B RW1116C RW1116D B12 8027 3RW1116A – RW1116C RW1116D 3B12 38027 E F Hose-Saver Straight Assembly – Nylon Std Pack FGHT FPS Nylon Poly MPT X HB Part Number Cap Part Number 25 3⁄4" - B34 3B34 25 - 3⁄4" B35 3B35 Nylon Poly C14 C38 C12 C58 C34 C100 3C14 3C38 3C12 3C58 3C34 3C100 3⁄4" X 3⁄4" (19 mm) 3⁄4" X 1" (25 mm) 1" X 1" (25 mm) 1-1⁄4" X 1" (25 mm) 1-1⁄4" X 1-1⁄4" (32 mm) 1-1⁄2" X 1-1⁄4" (32 mm) 1-1⁄2" X 1-1⁄2" (38 mm) 1-1⁄2" X 2" (50 mm) 2" X 2" (50 mm) 626320N 626325N 626425N 626525N 626532N 626632N 626638N 626651N 626751N 626012 626014 626014 626014 626014 626014 – – – Flat Seat Hose Barb Std Pack 25 25 25 25 25 25 US Units 1⁄4" 3⁄8" 1⁄2" 5⁄8" 3⁄4" 1" HB Metric Units 6.4 mm 10 mm 13 mm 16 mm 19 mm 25 mm Female Thread Swivel Hex Nut, Barb Insert with Ball Seat Std Pack BARB ONLY 50 50 50 NUT ONLY 50 50 50 50 US Units Size Metric Units Hose-Saver Elbow Assembly – Nylon Nylon 1⁄4" HB 6.4 mm NC14 3⁄8" HB 1⁄2" HB 10 mm 13 mm NC38 NC12 1⁄4" 3⁄8" 1⁄2" 1⁄2" with 1⁄4" HB 13 mm 10 mm 13 mm 13 mm with 6.4 mm HB NC14N NC38N NC12N NC1214 260 MPT X HB Part Number Cap Part Number 3⁄4" X 3⁄4" (19 mm) 3⁄4" X 1" (19 mm) 1" X 3⁄4" (19 mm) 1" X 1" (19 mm) 1" X 1-1⁄4" (19 mm) 1-1⁄4" X 1" (19 mm) 1-1⁄4" X 1-1⁄4" (19 mm) 1-1⁄2" X 1-1⁄4" (19 mm) 1-1⁄2" X 1-1⁄2" (19 mm) 2" X 2" (19 mm) 627320N 627325N 627420N 627425N 627432N 627525N 627532N 627632N 627638N 627751N 626012 626014 626012 626014 626014 626014 626014 626014 – – Street Elbow: Female Pipe Thread By Male Pipe Thread Male Pipe Thread By Hose Barb MPT x HB 316 Stainless Steel MPT X FPT 304 Stainless Steel 1⁄4" X 1⁄4" (6.4 mm) 1⁄4" X 3⁄8" (10 mm) 1⁄4" X 1⁄2" (13 mm) 3⁄8” X 3⁄8” (10 mm) 3⁄8” X 1⁄2” (13 mm) 1⁄2" X 1⁄2" (13 mm) 3⁄4" X 3⁄4" (19 mm) 1" X 1" (25 mm) 1-1⁄4" X 1-1⁄4" (32 mm) 1-1⁄2" X 1-1⁄2" (38 mm) 2" X 2" (50 mm) 3" X 3" (75 mm) 9A14 9A1438 9A1412 9A38 9A3812 9A12 9A34 9A100 9A114 9A112 9A200 9A300 1⁄4" X 1⁄4" 3⁄8" X 3⁄8" 1⁄2" X 1⁄2" 3⁄4" X 3⁄4" 1" X 1" 1-1⁄2" X 1-1⁄2" 1-1⁄4" X 1-1⁄4" 2" X 2" 3" X 3" 7SE14 7SE38 7SE12 7SE34 7SE100 7SE112 7SE114 7SE200 7SE300 Tee: Female Pipe Thread Coupling: Female Pipe Thread FPT X FPT 304 Stainless Steel 1⁄4" X 1⁄4" 1⁄2" X 1⁄2" 3⁄4" X 3⁄4" 1" X 1" 1-1⁄2" X 1-1⁄2" 2" X 2" 3" X 3" 7FC14 7FC12 7FC34 7FC100 7FC112 7FC200 7FC300 304 Stainless Steel 1⁄4" X 1⁄4" 1⁄2" X 1⁄2" 3⁄4" X 3⁄4" 1" X 1" 1-1⁄2" X 1-1⁄2" 1-1⁄4" X 1-1⁄4" 2" X 2" 3" X 3" 7LL14 7LL12 7LL34 7LL100 7LL112 7LL114 7LL200 7LL300 Reducer Bushing MPT X FPT 304 Stainless Steel 1⁄4" X 3⁄8" 3⁄8" X 1⁄4" 1⁄2" X 1⁄4" 1⁄2" X 3⁄8" 3⁄4" X 1⁄4" 3⁄4" X 1⁄2" 1" X 1⁄2" 1" X 3⁄4" 2" X 1-1⁄2" 7RB1418 7RB3814 7RB1214 7RB1238 7RB3414 7RB3412 7RB10012 7RB10034 7RB200112 304 Stainless Steel 1⁄4" 1⁄2" 3⁄4" 1" 1-1⁄4" 1-1⁄2" 2" 3" 7TT14 7TT12 7TT34 7TT100 7TT114 7TT112 7TT200 7TT300 Nipple Elbow: Female Pipe Thread – 90° FPT X FPT FPT X FPT X FPT MPT X Length 304 Stainless Steel 1⁄4" X 1-1⁄2" 1⁄4" X 3" 1⁄4" X 4" 1⁄4" X 6" 1⁄4 X 12" 3⁄8" X 1" 3⁄8" X 1-1⁄2" 1⁄2" X 1-1⁄8" 1⁄2" X 1-1⁄2" 1⁄2" X 2" 3⁄4" X 1-3⁄8" 3⁄4" X 4" 1" X 1-1⁄2" 1" X 4" 1-1⁄4" X 1-5⁄8" 1-1⁄2" X 1-3⁄4" 2" X 2" 2" X 2-1⁄2" 2" X 4" 2" X 6" 2" X 3" 2" X 3-1⁄2" 2" X 5" 714112 714300 714400 714600 7141200 738100 738112 712118 712112 712200 734138 734400 7100112 7100400 7114158 7112134 7200200 7200212 7200400 7200600 7200300 7200312 7200500 Hex Plugs 261 Part Number Size 7F18 7F14 7F38 7F12 7F34 7F100 7F200 1⁄8" 1⁄4" 3⁄8" 1⁄2" 3⁄4" 1" 2" ACCESSORIES–FITTINGS FITTINGS - STAINLESS STEEL Fittings - Steel Fittings - Brass Male Pipe Thread By Hose Barb Male Pipe Thread By Hose Barb MPT X HB Steel MPT X HB Brass 1⁄8" X 1⁄4" (6.4 mm) 1⁄8" X 3⁄8" (10 mm) 1⁄4" X 1⁄4" (6.4 mm) 1⁄4" X 3⁄8" (10 mm) 1⁄4" X 1⁄2" (13 mm) 3⁄8" X 1⁄4" (6.4 mm) 3⁄8" X 3⁄8" (10 mm) 3⁄8" X 1⁄2" (13 mm) 1⁄2" X 1⁄4" (6.4 mm) 1⁄2" X 3⁄8" (10 mm) 1⁄2" X 1⁄2" (13 mm) 1⁄2" X 5⁄8" (16 mm) 1⁄2" X 3⁄4" (19 mm) 3⁄4" X 3⁄8" (10 mm) 3⁄4" X 1⁄2" (13 mm) 3⁄4" X 5⁄8" (16 mm) 3⁄4" X 3⁄4" (19 mm) 3⁄4" X 1" (25 mm) 1" X 1" (25 mm) A1814S A1838S A14S A1438S A1412S A3814S A38S A3812S A1214S A1238S A12S A1258S A1234S A3438S A3412S A3458S A34S A34100S A100S 1⁄8" X 1⁄4" (6.4 mm) 1⁄8" X 3⁄8" (10 mm) 1⁄4" X 1⁄4" (6.4 mm) 1⁄4" X 3⁄8" (10 mm) 1⁄4" X 1⁄2" (13 mm) 3⁄8" X 1⁄4" (6.4 mm) 3⁄8" X 3⁄8" (10 mm) 3⁄8" X 1⁄2" (13 mm) 1⁄2" X 1⁄4" (6.4 mm) 1⁄2" X 3⁄8" (10 mm) 1⁄2" X 1⁄2" (13 mm) 1⁄2" X 5⁄8" (16 mm) 1⁄2" X 3⁄4" (19 mm) 3⁄4" X 3⁄8" (10 mm) 3⁄4" X 1⁄2" (13 mm) 3⁄4" X 5⁄8" (16 mm) 3⁄4" X 3⁄4" (19 mm) 3⁄4" X 1" (25 mm) 1" X 1" (25 mm) A1814B A1838B A14B A1438B A1412B A3814B A38B A3812B A1214B A1238B A12B A1258B A1234B A3438B A3412B A3458B A34B A34100B A100B Add Prefix "BG-" for 1 part per retail bag. King Nipple Female Pipe Thread By Hose Barb MPT X HB Plated Steel FPT X HB Brass 3⁄4” (19 mm) 1" X 3⁄4” (19 mm) 1" (25 mm) 1-1⁄4” (32 mm) 1-1/2” (38 mm) 2" (50 mm) AA34P AA10034P AA100P AA114P AA112P AA200P 1⁄4" X 3⁄8" (10 mm) AF1438B Add Prefix "BG-" for 1 part per retail bag. Street Elbows: Female Pipe Thread By Male Pipe Thread Female Pipe Straight Swivel Nut – Hex FPS Steel MPT X FPT Brass 3⁄4" B35S 1⁄4" X 1⁄4" 3⁄8" X 3⁄8" 1⁄2" X 1⁄2" SE14B SE38B SE12B NOTE: For use with steel flat hose barbs 1⁄4" to 3⁄4". Hose Mender Flat Seat Hose Barb HB Steel HB Brass 1⁄2" (12 mm) 3⁄4" (19 mm) C12S C34S 1⁄4" (6.4 mm) X 1⁄4" (6.4 mm) 3⁄8" (10 mm) X 3⁄8" (10 mm) 1⁄2" (12 mm) X 1⁄2" (12 mm) 5⁄8" (16 mm) X 5⁄8" (16 mm) 3⁄4" (19 mm) X 3⁄4" (19 mm) SHM14B SHM38B SHM12B SHM58B SHM34B 262 HB Brass FGHT Brass 3⁄8" (10 mm) 1⁄2"(13 mm) 5⁄8" (16 mm) 3⁄4" (19 mm) C38B C12B C58B C34B 3⁄4" B33B Couplings: Female Pipe Thread Male Garden Hose Thread By Hose Barb FPT X FPT Brass MGHT X HB Brass 1⁄4" X 1⁄4" 1⁄2" X 1⁄2" FC14B FC12B 3⁄4" X 3⁄8" (10 mm) 3⁄4" X 1⁄2" (13 mm) 3⁄4" X 5⁄8" (16 mm) 3⁄4" X 3⁄4" (19 mm) D3438B D3412B D3458B D34B Adapters: Male Garden Hose Thread By Male Pipe Thread Swivel Adapter MPT Brass MGHT X MPT Brass 3⁄8" 1⁄2" SA38B SA12B 3⁄4" X 1⁄2" 3⁄4" X 3⁄4" E3412B E34B Elbows: Female Pipe Thread – 90° Hex Plug with Male Pipe Thread FPT X FPT Brass MPT Brass 1⁄4” X 1⁄4” LL14B 1⁄8" X 1⁄8" LL18B 1⁄4" 3⁄8" 1⁄2" F14B F38B F12B Female Garden Hose Swivel Nut – Knurled Reducer Bushings MPT X FPT Brass 1⁄4" X 1⁄8" 1⁄2" X 1⁄4" 1⁄2" X 3⁄8" 3⁄4" X 1⁄2" RB1418B RB1214B RB1238B RB3412B FGHT Brass 3⁄4" B34B NOTE: For use with flat seat hose barbs 1⁄4" to 3⁄4". 263 ACCESSORIES–FITTINGS Swivel Nut Hex Female Garden Hose Thread Flat Seat Hose Barb Cable Ties and Clamps Cable Ties Standard Pack Length Metric Units 102 mm Part Number White Nylon NS4 Part Number Black UV Nylon 3NS4 3NS7 100 US Units 4 inch 100 6-1⁄8 inch 156 mm NS7 100 7-1⁄2 inch 170 mm NS8 3NS8 100 11-1⁄2 inch 292 mm NS12 3NS12 100 17-3⁄4 inch 450 mm NS17 3NS17 100 21-3⁄4 inch 552 mm NS21 3NS21 100 28-3⁄8 inch 720 mm NS28 3NS28 100 37-1⁄4 inch 946 mm NS32 3NS32 Hose Clamps Fits Hose Min Part Number NOTE: 10 per box – order in box multiples Sealant 4JM 6JM 8JM 10JM 12JM 16JM 7⁄32 inch 5⁄16 inch 7⁄16 inch 1⁄2 inch 9⁄16 inch 11⁄16 inch 6J 8J 10J 12J 16J 20J 24J 28J 32J 36J 40J 44J 48J 52J 56J 64J 104J 3⁄8 inch 7⁄16 inch 9⁄16 inch 9⁄16 inch 11⁄16 inch 3⁄4 inch 1-1⁄16 inch 1-5⁄16 inch 1-9⁄16 inch 1-13⁄16 inch 2-1⁄16 inch 2-5⁄16 inch 2-9⁄16 inch 2-13⁄16 inch 3-1⁄16 inch 3-1⁄2 inch 5 inch Fits Hose Max 5/16 inch BAND 5,6 mm 5⁄8 inch 8 mm 7⁄8 inch 11 mm 1 inch 13 mm 11⁄16 inch 14 mm 11⁄4 inch 18 mm 11⁄2 inch 1/2 inch BAND 10 mm 7⁄8 inch 11 mm 1 inch 14 mm 1-1⁄16 inch 14 mm 1-1⁄4 inch 18 mm 1-1⁄2 inch 19 mm 1-3⁄4 inch 27 mm 2 inch 33 mm 2-1⁄4 inch 40 mm 2-1⁄2 inch 46 mm 2-3⁄4 inch 52 mm 3 inch 59 mm 3-1⁄4 inch 65 mm 3-1⁄2 inch 71 mm 3-3⁄4 inch 78 mm 4 inch 89 mm 4-1⁄2 inch 127 mm 7 inch Normal Hose Size* 16 mm 22 mm 25 mm 27 mm 32 mm 38 mm 1⁄4 inch 3⁄8 inch 1⁄2 inch 5⁄8 inch 3⁄4 inch 1 inch 6,4 mm 10 mm 13 mm 16 mm 19 mm 25 mm 22 mm 25 mm 27 mm 32 mm 38 mm 44 mm 50 mm 57 mm 64 mm 70 mm 76 mm 83 mm 89 mm 95 mm 102 mm 114 mm 178 mm 3⁄8 inch 1⁄2 inch 5⁄8 inch 3⁄4 inch 1 inch 1-1⁄4 inch 1-1⁄2 inch 1-3⁄4 inch 2 inch 2-1⁄4 inch 2-1⁄2 inch 2-3⁄4 inch 3 inch 3-1⁄4 inch 3-1⁄2 inch 4 inch 6-1⁄2 inch 10 mm 13 mm 16 mm 19 mm 25 mm 32 mm 38 mm 44 mm 50 mm 57 mm 64 mm 70 mm 76 mm 83 mm 89 mm 102 mm 165 mm * Hose sizes are based on inside I.D. Rector Seal 28651 21 Black Jack Container US Units Metric Units 1/2 Pint Can .24 Litre 28541 21 Black Jack 1 Pint Can Part Number Type Liquid Teflon Sealant Part Number LT2 US Units 2 oz. Size Metric Units 59 mL .47 Litre Container Tube LT4 4 oz. 118 mL Can LT8 8 oz. 237 mL Can Teflon Tape Part Number 1252 264 US Units 1/2” Size Metric Units 13 mm Container 520" Index Part Number Page Part Number Page Part Number Page Part Number Page 002201-3470 240 02300G30 255 1510-0075 86 1552C-130E 46 002201-3460 240 02300P30 255 1520-0034 54 1552C-130ESP 47 002201-3440 240 02--050G 255 1520-1075 228 1552C-130SP 47 002201-3430 240 02--100G 255 1520-1100 228 1572-SPX 62 003430 240 02--150G 255 1520-1125 228 1573-SPX 62 003440 240 02--200G 255 1520-1150 228 15-14 248 003460 240 02--300G 255 1520-1075SS 228 15Q2530TC 202 003470 240 104J 264 1520-1100SS 228 166-200-36 97 0113434307 227 10AEE930003 198 1520-1125SS 228 166-200-46 97 0113434308 227 10BG-1700-0255 170, 201 1520-1150SS 228 166-200-56 97 01134343010 227 10BG-30-DC-00 170 1521C-65 46 166-200-57 97 0135606H 231 10BG-30-DC-01 170, 173 1521C-65M 46 16842490 201 01WSHR13 124 10BG-30-DC010 170 1522C-65SP 47 16842491 201 02050D12 255 10BG-30-DC-015 170, 173 152607TC 202 16JM 264 02050E12 255 10BG-30-DC018 170 1530-0024S 53 16J 264 02050F12 255 10BG-30-DC-02 170, 173 1530-0028S 53 16Q2530TC 202 02075A34 254 10BG-30-DC023 170 1532C-160HSP 59 1700-0044 237 02075B34 254 10BG-30-DC-03 170, 173 1532C-6SP 59 1700-0045 237 02075C34 254 10BG-30-DC-035 170 1533C-13ESP 59 1700-0057 237 02075D34 255 10BG-30-DC-04 170, 173 1533C-13SP 59 1700-0058 237 02075E34 255 10BG-30-DC-05 170, 173 1533C-390EHSP 59 1700-0064 237 02075F34 255 10BG-30-DC-06 170, 173 1534 83 1700-0065 237 02075G34 255 10BG-30-DC-07 170, 173 1535 84 1700-0090 236 02075P34 255 10BG-30-DC-08 170, 173 1536-SP 49 1700-0091 236 02100A10 254 10BG-30-DC-10 170, 173 1536 48 1700-0092 236 02100B10 254 10BG-30-DC-12 170, 173 1537-SP 49 1700-0255 135 02100C10 254 10JM 264 1537 48 1700C 69 02100D10 255 10J 264 1538-SP 47, 49 1700N 69 02100E10 255 1212S18 198 1538 46, 48 1700XL 69 02100F10 255 1252 264 1539-SP 49 171N-100 249 02100G10 255 12JM 264 1539 48 171N-12 249 02100P10 255 12J 264 1540-SP 49 171N-14 249 02125A54 254 1320-0015 71, 72 1540 48 171N-112 249 02125B54 254 1320-0016 71, 72 1541A-SP 61 171N-114 249 02125C54 254 1320-0054 72 1542A-160HSP 61 171N-200 249 02125D54 255 1320-0076 71, 72 1542A-550BSP 61 171N-34 249 02125E54 255 1320-0077 71, 72 1542A-65SP 61 171N-38 249 02125F54 255 1320-0078 71, 72 1542P-160HSP 56 1721-0010 124 02150A64 254 1320-0079 71, 72 1542P-200HSP 56 1721-0220 223 02150B64 254 1320-0080 71, 72 1542P-550BSP 56 1723-0142 223 02150C64 254 1320-0081 71, 72 1542P-55SP 56 1802C 115 02150D64 255 1320-0082 72 1542P-65ESP 56 1803C 115 02150E64 255 1320-0083 72 1542P-65SP 56 1804C 115 02150F64 255 1323-0072 71, 72 1542P-65SPM 56 1805C 115 02150G64 255 1323-0073 71, 72 1542P-950BSP 56 1806C 115 02150P64 255 1323-0074 71, 72 1543A-160HSP 61 1807C 115 02200A20 254 1323-0075 71, 72 1543A-160HTSP 61 18103B-050 255 02200B20 254 1323-0076 71, 72 1543A-65SP 61 18103D2N 255 02200C20 254 1323-0077 71, 72 1543A-65TSP 61 18103E2 255 02200D20 255 1323-0078 72 1543P-130ESP 56 18103F2N 255 02200E20 255 1323-0079 72 1543P-130ESP-01 56 18104B-050 255 02200F20 255 141418 198 1543P-130SP 56 18105B-050 255 02200G20 255 1442P-65SP 56 1543P-390EHSP 56 18106B-050 255 02200P20 255 1502C 70 1550-BSP 50 18107B-050 255 02300A30 254 1502N 70 1550-SP 50 18109B-050 255 02300B30 254 1502XL 70 1550 50 18123B-050 255 02300C30 254 1510-0001 86 1551-BSP 47 18124B-050 255 02300D30 255 1510-0002 86 1551-SP 47, 50 18125B-050 255 02300E30 255 1510-0005 86 1551 46, 50 18126B-050 255 02300F30 255 1510-0016 86 1552C-130 46 18127B-050 255 265 Index Part Number Page Part Number Page Part Number Page Part Number Page 18129B-050 255 2160-0047 86, 119 2410-0038 219 2410-0099 219 1824C 115 2160-0048 86, 119 2410-0039 219 2410-0100 219 1825C 115 2220B-AP 110 2410-0040 219 2410B-P 106 1826C 115 2220B-HP 110 2410-0041 219 2411B-P 106 1827C 115 2220B-P 110 2410-0042 219 2412B-P 106 203282152 236 2221B-AP 110 2410-0043 219 2413B-P 106 203282153 236 2221B-HP 110 2410-0044 219 2414B-P 106 203282162 236 2221B-P 110 2410-0045 219 2430B-P 106 203282163 236 2230B-AP 110 2410-0047 219 2431B-P 106 2032821535 236 2230B-HP 110 2410-0048 219 2432B-P 106 2032821635 236 2230B-P 110 2410-0049 219 2433B-P 106 2087-593-135 95 2231B-AP 110 2410-0050 219 2434B-P 106 2088-313-145 95 2231B-CP 110 2410-0051 219 244-3366 101 2088-343-135 95 2231B-HP 110 2410-0052 219 244-5126 101 2088-343-170 96 2231B-P 110 2410-0053 219 244-6128 101 2088-343-500 96 2270-0136 201 2410-0054 219 24J 264 2088-394-144 96 22W11MF64 2410-0055 219 251032BL 197 2088-394-154 96 2410-0056 219 251032GY 197 2088-443-144 95 141, 143, 145, 151, 153, 155, 157, 167, 189, 201, 202 2410-0057 219 251032WH 197 2088-562-144 96 2410-0058 219 2510-0001 119 2088-564-144 96 2410-0059 219 2510-0007 119 20J 264 2410-0060 219 2510-0017 119 20N62230 236 2410-0061 219 2510-0029 119 20N62250 236 2410-0062 219 2510-0030 120 20N62280 236 2410-0063 219 2510-0031 120 20N62330 236 2410-0064 219 2520-0209 216 20N62350 236 2410-0065 219 2520-0210 216 20N62380 236 2410-0066 219 2520-0211 216 20N62430 236 2410-0067 219 2520-0213 216 20N62450 236 2410-0068 219 2520-0214 216 20N62480 236 2410-0069 219 2520-0215 216 20N62530 236 2410-0070 219 2520-0216 217 20N62550 236 2410-0071 219 2520-0217 217 20N62580 236 2410-0072 219 2520-0218 217 20N62630 236 2410-0073 219 2520-0219 217 20N62650 236 2410-0074 219 2526-0011 54 20N62680 236 2410-0075 219 2535S 105 2102020 254 2410-0076 219 2541-0045 128 2102030 254 2410-0077 219 2541-0046 128 2130P-A055 122 2410-0078 219 2541-0048 128 2130P-A079 122 2410-0079 219 2541-0049 128 2130P-D183 122 2410-0080 219 2541-0050 128 2130P-D355 122 2410-0081 219 2541-0051 128 2130P-D359 122 2410-0082 219 2541-0053 128 2130P-D395 122 2410-0083 219 2541-0054 128 2130P-D399 122 2410-0084 219 2541-0055 128 2130PX 122 2410-0085 219 2541-0065 128 2132P-D183 123 2410-0086 219 2545S 105 2132P-D355 123 2410-0087 219 2549-0042 128 2132P-D359 123 2410-0088 219 2549-0043 128 2132P-D395 123 2410-0089 219 255-223 100 2132P-D399 123 2410-0090 219 255-313 100 2132PX 123 2410-0091 219 255-323 100 2133P-D355 123 2410-0092 219 255-413 100 2133P-D395 123 2410-0093 219 255-568 100 2133PX 123 2410-0094 219 255-613 100 2150P-D05AC 124 2410-0095 219 255-623 100 2150P-D35DC 124 2410-0096 219 255-646 100 2150P-D39DC 124 2410-0097 219 2640-0001 249 2150PX 124 2410-0098 219 2640-0002 249 2160-0038 86, 119 22W11MF64V 202 2300-0067 216 2303B-P 108 2304B-P 108 2314B-P 108 2330B-P 108 2331B-CP 108 2340B-P 108 2345B-P 108 234-2916 101 234-2926 101 234-2936 101 234-2946 101 234-3916 101 234-3926 101 234-3936 101 234-3946 101 2351B-P 108 2354B-CP 108 2359B-P 108 2359B-PY 108 2404-0019 119 2404-0030 119 2404-0419 124 2404-0427 124 2410-0021 219 2410-0022 219 2410-0023 219 2410-0024 219 2410-0025 219 2410-0026 219 2410-0027 219 2410-0028 219 2410-0029 219 2410-0030 219 2410-0031 219 2410-0032 219 2410-0033 219 2410-0034 219 2410-0035 219 2410-0036 219 2410-0037 219 266 Index Part Number Page Part Number Page Part Number Page Part Number Page 2640-0003 249 3010-0004 71 30AN1.2 200 3300-0093 73 2640-0004 249 3010-0005 71 30AN1.8 200 3300-0094 73 2640-0005 249 3010-0006 71 30AN2.4 200 3300-0098 73, 124 2640-0007 249 3010-0010 71 30B4SNF70E35 232 3300-0102 117 2640-0008 249 3010-0014 71 30DT0.5 163, 200 3300-0103 117 2640-0009 249 3010-0020 71 30DT0.75 163, 200 3301-0001 73, 124 2640-0010 249 3010-0061 54 30DT10 163 3305-0011 216, 225 2640-0011 249 3010-0064 54 30DT15 163 3305-0112 248 2640-0014 249 3010-0066 54, 71 30DT1.0 163, 200 3312-0004 117 2642-0001 118 3010-0067 54, 71 30DT1.5 163, 200 3312-0005 117 27101612 198 3010-0068 71 30DT20 163 3316-0002 73 2728-1001 73, 121 3010-0084 54 30DT2.0 163 3320-0064 104 2729-1001 73, 121 3010-0167 54 30DT2.5 163 3320-0065 248 2729-1002 73, 121 3010-0168 54 30DT3.0 163 3324-1001.05 242 2729-1003 73, 121 3011-0006 71 30DT4.0 163 3324-1001.1 242 2729-1005 73, 121 3011-0021 71 30DT5.0 163 3324-1001.15 242 2729-1006 73, 121 301AF0.4-65 198 30DT7.5 163 3324-1001.2 242 27302489 197 301AF0.7-80 198 30FCX02 182 3324-1001.25 242 27302492 197 301AF0.7-80W 198 30FCX03 182 3324-1001.3 242 2738-1001 73, 121 301AF1.2-105C 198 30FCX04 182 3324-1001.35 242 2738-1002 73, 121 301AF1.6-100 198 30FCX05 182 3324-1001.4 242 2738-1003 73, 121 301AF5.0-70 198 30FCX06 182 3324-1001.45 242 2738-1004 73, 121 301AFD0.7-80 198 30HAF01110 197 3324-1001.5 242 2739-1001 73, 121 301AFD1.2-105 198 30HAF01480 197 3324-2000.85 242 2739-1002 73, 121 301AFD1.6-100 198 30HAF01570 197 3324-2001.05 242 2739-1003 73, 121 301AFUSA0.5 198 30HAF01-65 197 3324-2001.1 242 2739-1004 73, 121 301AFUSA1.0 198 30HAF007-80 197 3324-2001.15 242 2739-1005 73, 121 301AFUSA2.0 198 30HCX10 176 3324-2001.2 242 2739-1006 73, 121 301AFUSA3.0 198 30HCX12 176 3324-2001.25 242 2739-1009 73, 121 301MNF-W 198 30HCX18 176 3324-2001.3 242 2740-1001 73, 121 3020-0008 54 30HCX2 176 3324-2001.35 242 2740-1002 73, 121 3020-0009 54, 71 30HCX3 176 3324-2001.4 242 2740-1005 73, 121 3021-0006 220 30HCX4 176 3324-2001.45 242 2740-1007 73, 121 3040-0015 203 30HCX6 176 3324-2001.5 242 2741-1001 73, 121 3040-0016 203 30HCX8 176 3341-0001 117 2741-1002 73, 121 3040-0017 203 30HCX9 176 3341-0002 117 2741-1003 73, 121 3040-0018 203 30PFAF008-80 198 3341-0003 117 2741-1004 73, 121 3040-0019 203 30PFAF008-80BL 198 3341-0004 117 2741-1005 73, 121 3040-0020 203 30PFAF013-105 198 3350-0021 120 2741-1007 73, 121 30-CR-13 173 30PFAF013-105BL 198 3350-0022 120 2801-0001 86 30-CR-23 173 30Q2603-20 201 3350-0032 237 2801-0002 86 30-CR-25 173 30Q3579A 137 3350-0033 120 2850-0027 217 30-CR-45 173 30Q3834 157, 202 3350-0034 237 28541 264 30-DC010 170 32100010 202 3350-0035 237 28651 264 30-DC018 170 32100050 202 3350-0040 237 28J 264 30-DC023 170 32100200 198 3350-0042 237 28OC02 185 30-DC-00 170 32100510 202 3350-0043 237 28OC03 185 30-DC-01 170, 173 32100530 202 3350-0044 237 28OC04 185 30-DC-02 170, 173 32100550 202 3350-0045 237 28OC06 185 30-DC-03 170, 173 32195Q3269 198 3350-0046 237 28OC08 185 30-DC-04 170, 173 32J 264 3350-0056 237 28OC12 185 30-DC-05 170, 173 32PIFA250 198 3350-0057 237 28OC16 185 30-DC-06 170, 173 3300-0001 73, 124 3350-0058 237 2910-0026 224 30-DC-07 170, 173 3300-0002 73, 124 3350-0059 237 2910-0037 227 30-DC-08 170, 173 3300-0015 73, 124 3350-0060 237 3000-350 98 30-DC-10 170, 173 3300-0016 73, 124 3350-0061 237 3010-000 100 30-DC-12 170, 173 3300-0082 88 3350-0062 237 3010-0001 71 30-DC-015 170, 173 3300-0084 117 3350-0068 237 3010-0002 71 30-DC-035 170 3300-0087 88 3350-0069 237 3010-0003 71 30AN0.6 200 3300-0088 88 3350-0071 237 267 Index Part Number Page Part Number Page Part Number Page Part Number Page 3350-0072 237 3350-0151B 236 3351-0039 236 33812D 227 3350-0073 237 3350-0151N 236 3351-0040 236 3381-0010 239 3350-0074 237 3350-0152B 236 3351-0041 236 3381-0011 239 3350-0075 237 3350-0152N 236 3351-0042 236 3381-0013 239 3350-0076 237 3350-0153B 236 3351-0043 236 3381-0016 238 3350-0077 237 3350-0153N 236 3365-0002 241 3381-0018 241 3350-0079 237 3350-0154B 236 3365-0004/24 241 3381-0021 238 3350-0082 237 3350-0154N 236 3365-0004/36 241 3381-0032 241 3350-0085 237 3350-0155B 236 3365-0004/47 241 3381-0034 241 3350-0112 237 3350-0155N 236 3365-0005/24 241 3381-0036 238 3350-0113 237 3350-0156B 236 3365-0005/36 241 3381-0043 238 3350-0114 237 3350-0156N 236 3365-0005/47 241 3381-0047 241 3350-0115 237 3350-0157B 236 3365-0007/14 241 3381-0018W 241 3350-0116 237 3350-0157N 236 3365-0007/24 241 3381-0032W 241 3350-0117 237 3350-0158B 236 3365-0007/36 241 3381-0043L 238 3350-0126 120 3350-0158N 236 3371-0019 233 3385-1500 239 3350-0127 120 3350-0159B 236 3371-0028 233 3385-2300 239 3350-0128 120 3350-0159N 236 3371-0036 235 3385-3000 239 3350-0131 237 3350-0160B 236 3371-0038 235 3385-3500 239 3350-0132 237 3350-0160N 236 3371-0040 235 3385-4000 239 3350-0134 120 3350-0161B 236 3371-0034S 235 3385-4500 239 3350-0034A 236 3350-0161N 236 3371-0036R 235 3385-5000 239 3350-0035A 236 3350-0162B 236 3371-0037R 235 3385-5500 239 3350-0040A 236 3350-0162N 236 3371-0038R 235 3385-6000 239 3350-0043A 236 3350-0163B 236 3371-0039R 235 3385-7000 239 3350-0046A 236 3350-0163N 236 3371-0040R 235 338D 227 3350-0056A 236 3350-0164B 236 3371-0041R 235 3390-0006 116 3350-0057A 236 3350-0164N 236 3371 233 3390-0007 116 3350-0058A 236 3350-0165B 236 3375-0008 118 3390-0037 116 3350-0059A 236 3350-0165N 236 3375-0012 118 3390-0053 116 3350-0071A 236 3350-0166B 236 3375-0021 118 3390-0076 116 3350-0072A 236 3350-0166N 236 3375-0025 124 3390-0079 116 3350-0073A 236 3350-0167B 236 3375-0015-10 118 3390-0081 116 3350-0079A 236 3350-0167N 236 3375-0015-2 118 3390-0102 116 3350-0079F 237 3350-0168B 236 3375-0015-3 118 3390-0062D 116, 124 3350-0082A 236 3350-0168N 236 3375-0015-4 118 3390-0063D 116 3350-0082F 237 3350-0169B 236 3375-0015-5 118 3390-0067D 116 3350-0085A 236 3350-0169N 236 3375-0015-6 118 3390-0071D 116 3350-0085F 237 3350-0170B 236 3375-0015-7 118 3390-0072D 116 3350-0112A 236 3350-0170N 236 3375-0015-8 118 3390-0104/3A 116 3350-0113A 236 3350-0171B 236 3375-0015-9 118 33942 227 3350-0114A 236 3350-0171N 236 3375-0017-10 118 3396-0006 117 3350-0142B 236 3350-0172B 236 3375-0017-2 118 3396-0011 117 3350-0142N 236 3350-0172N 236 3375-0017-3 118 3396-0014 117 3350-0143B 236 3350-0173B 236 3375-0017-4 118 3396-0025 117 3350-0143N 236 3350-0173N 236 3375-0017-5 118 3396-0031/2.1 116 3350-0144B 236 3351-0005 237 3375-0017-6 118 3396-0033/2.3 116 3350-0144N 236 3351-0006 237 3375-0017-7 118 3396-0034/1.8 116 3350-0145B 236 3351-0007 237 3375-0017-8 118 3410-0041 56, 57, 62 3350-0145N 236 3351-0013 237 3375-0017-9 118 3410-0042 56, 57, 58, 62 3350-0146B 236 3351-0014 237 3376-0870 234 3410-0043 224 3350-0146N 236 3351-0015 237 3376-0871 234 3410-0044 224 3350-0147B 236 3351-0016 237 3376-1170 234 3420-0003 71 3350-0147N 236 3351-0020 237 3376-1171 234 3420-0004 71 3350-0148B 236 3351-0022 237 3376-1670 234 3420-0010 71 3350-0148N 236 3351-0024 237 3376-1671 234 3420-0023 71 3350-0149B 236 3351-0026 237 3377-1170 234 3420-0024 71 3350-0149N 236 3351-0035 236 3377-1171 234 3420-0025 71 3350-0150B 236 3351-0036 236 3377-1670 234 3430-0037 112 3350-0150N 236 3351-0037 236 3377-1671 234 3351-0038 236 268 Index Part Number 3430-0332 Page 15, 16, 17, 20, 25, 26, 27, 28, 30, 38, 39, 43, 44, 46, 47, 48, 49 3430-0333 13, 22, 23, 24, 44 3430-0334 11, 12 3430-0380 71 3430-0381 71 3430-0384 71 3430-0386 71 3430-0387 71 3430-0390 71 3430-0437 71 3430-0445 34 3430-0456 54 3430-0464 46, 47, 50 3430-0476 44 3430-0477 44 3430-0478 44 3430-0479 44 3430-0500 36 3430-0537 18, 19 3430-0540 71, 72 3430-0589 15, 16, 17, 20, 25, 26, 27, 28, 30, 32, 38, 39, 43, 44, 46, 47, 48, 49, 52 3430-0590 13, 22, 23, 24, 44, 52 3430-0591 11, 12, 52 3430-0592 54 3430-0593 34, 52 3430-0601 36, 37, 52 3430-0604 21, 40, 42, 52 3430-0633 124 3430-0634 124 3430-0635 56, 57 3430-0636 71 3430-0645 105 3430-0646 18, 19, 52 3430-0650 54 3430-0659 56, 57 3430-0675 59 3430-0676 59 3430-0690 56, 57 3430-0691 56, 57 3430-0692 56, 57, 58 3430-0699 105 3430-0700 53 3430-0754 223 3430-0755 223 3430-0757 56, 57, 58 3430-0768 238 3430-0779 14, 50 3430-0790 224 3430-0791 61 3430-0792 61 3430-0793 61 3430-0796 44 3430-0797 54 3430-0807 234 3430-0823 234 Part Number Page Part Number Page Part Number Page 3430-0838 56, 57, 58 350640-020 231 3800-0089 236 3430-0480SP 12, 17, 32, 43 350640 231 3800-0090 236 3430-0481SP 19, 37 350660 231 3800-0091 236 3430-0482SP 17, 49 350680-020 231 3800-0092 236 3430-0673CSP 59 350680 231 3800-0093 236 3430-0674CSP 59 352000-020 231 3800-0094 236 3430-0692-02 56, 57, 58 352080-1 231 3800-0095 236 3430-0754V 223 352080 231 3800-0096 236 3430-0755V 223 352180-1 231 3800-0097 236 3430-0840V 220 352180 231 38027 227, 260 3470-0101 245 3522000 231 3812D 227 3470-0102 245 3522040 231 383818 198 3470-0103 245 3522040-1 231 38D 227 3470-0104 245 3522060 231 3942 227 3470-0106 245 3522060-1 231 3A100114 257 3470-0107 245 3522100 231 3A10034 257 3470-0201 245 3522100-1 231 3A100 257 3470-0202 245 3522120 231 3A112114 257 3470-0203 245 3522120-020 231 3A112 257 3470-0204 245 3522120-1 231 3A114100 257 3470-0205 251 3522140 231 3A114112 257 3470-0206 245 3522140-020 231 3A11434 257 3470-0207 245 3522140-1 231 3A114 257 3470-0208 246 3522160 231 3A1214 257 3470-0209 246 3522160-020 231 3A1234 257 3470-0301 246 3522160-1 231 3A1238 257 3470-0302 246 3522221 231 3A1258 257 3470-0303 246 3522221-1 231 3A12 257 3470-0305 246 354230 229 3A1412 257 3470-0306 246 356040 231 3A1438 257 3470-0307 246 356041 231 3A14 257 3470-0308 246 356060 231 3A1814 257 3470-0401 246 356061 231 3A18316 257 3470-0402 246 356240 231 3A1838 257 3470-0403 246 356241 231 3A200 257 3470-0500 247 356260 231 3A34100 257 3470-0601 246 356261 231 3A3412 257 3470-0602 246 356640-020NB 231 3A3414 257 3470-0603 246 356660-020NB 231 3A3438 257 3470-0604 246 36J 264 3A3458 257 3470-0605 246 3800-0025 236, 237 3A34 257 3470-0700 247 3800-0026 236, 237 3A3812 257 3470-0702 247 3800-0029 236, 237 3A3814 257 3470-0708 247 3800-0035 120 3A38516 257 3470-0800 247 3800-0040 236, 237 3A3858 257 3470-0801 247 3800-0041 236, 237 3A38 257 3470-0900 247 3800-0042 236, 237 3AF1214 257 3470-0901 247 3800-0043 236, 237 3AF1234 257 34-006 100 3800-0044 236, 237 3AF1238 257 34-007 100 3800-0045 236, 237 3AF1258 257 3502420 231 3800-0046 236, 237 3AF12 257 3502440 231 3800-0047 236, 237 3AF1438 257 3502460 231 3800-0048 236, 237 3AF14 257 350401 231 3800-0065 236, 237 3AF3412 257 350420-020 231 3800-0066 236, 237 3AF3438 257 350440-020 231 3800-0067 236, 237 3AF3458 257 350460-020 231 3800-0074 119 3AF34 257 350480-020 231 3800-0086 236 3AF3812 257 350480 231 3800-0087 236 3AF3814 257 350620-020 231 3800-0088 236 3AF38 257 269 Index Part Number Page Part Number Page Part Number Page Part Number Page 3B100 124, 260 3EL34HB 258 3M1418 258 3SE12 257 3B12 227, 260 3EL34 257 3M14 258 3SE14 257 3B3412 260 3EL3812 257 3M18 258 3SE200 257 3B34 260 3EL3814 257 3M200 258 3SE3445 258 3B35 260 3EL3812F 257 3M3412 258 3SE34 257 3C100 260 3EL3814F 257 3M3438 258 3SE38 257 3C12NPT 260 3EL3814HB 258 3M34 258 3SHM100 259 3C12 260 3EL3858 257 3M3814 258 3SHM112 259 3C14 260 3EL38F 257 3M3818 258 3SHM114 259 3C34 260 3EL38HB 258 3M38 258 3SHM1238 259 3C38 260 3EL38 257 3N34 260 3SHM1258 259 3C58 260 3EL58HB 258 3NB1612 227 3SHM12 259 3D3412 259 3ELD3412 259 3NB1614 227 3SHM14 259 3D3438 259 3ELD3414 259 3NF1614 227 3SHM200 259 3D3458 259 3ELD3438 259 3NS12 264 3SHM34 259 3D34 259 3ELD34 259 3NS17 264 3SHM38 259 3E3412 259, 260 3F100 258 3NS21 264 3SHM58 259 3E3438 259 3F112 258 3NS28 264 3T100 259 3E34 259, 260 3F114 258 3NS32 264 3T112 259 3EL10012 257 3F12 258 3NS4 264 3T114 259 3EL10034 257 3F14 258 3NS7 264 3T1234T 259 3EL100 257 3F18 258 3NS8 264 3T1238T 259 3EL112HB 258 3F200 258 3NTL12 227 3T1238 259 3EL112 257 3F34 258 3NTL14 227 3T12C 227 3EL11434 257 3F38 258 3NTL34 227 3T12T 259 3EL114100 257 3FC100 258 3NTL38 227 3T12 259 3EL114112 257 3FC112 258 3NTL58 227 3T1438T 259 3EL114HB 258 3FC114 258 3NTT12 227 3T1438 259 3EL114 257 3FC12 258 3NTT34 227 3T14T 259 3EL1214 257 3FC200 258 3NTT38 227 3T14 259 3EL1214HB 258 3FC34 258 3NTT58 227 3T200 259 3EL1234 257 3G3412 259 3Q12 260 3T3412T 259 3EL1238 257 3G3414 259 3Q14 260 3T3412 259 3EL1234F 257 3G34 259 3R12 233 3T3438T 259 3EL1238HB 258 3GTT1214 258 3RB10012 258 3T3458T 259 3EL1258 257 3GTT3414 258 3RB10034 258 3T34C 227 3EL1258F 257 3H34 259 3RB11234 258 3T34F 259 3EL12HB 258 3HM1214 259 3RB112100 258 3T34T 259 3EL12 257 3HM1238 259 3RB112114 258 3T34 259 3EL1412 257 3HM14 259 3RB11434 258 3T3812T 101, 259 3EL1438 257 3HM3814 259 3RB114100 258 3T3812 259 3EL14316 257 3HM516 259 3RB1214 258 3T38C 227 3EL14316F 257 3HM5838 259 3RB1218 258 3T38T 259 3EL1438F 257 3I34 260 3RB1238 258 3T38 259 3EL14F 257 3J3412 259 3RB1418 258 3T58 259 3EL14HB 258 3K8412 227 3RB20034 258 3TT100 258 3EL14 257 3K8414 227 3RB200100 258 3TT112 258 3EL1814 257 3K8438 227 3RB200112 258 3TT114 258 3EL1838 257 3LL100 258 3RB200114 258 3TT12 258 3EL200HB 258 3LL112 258 3RB300200 258 3TT14 258 3EL200 257 3LL114 258 3RB3412 258 3TT200 258 3EL34100 257 3LL12 258 3RB3414 258 3TT34 258 3EL3412 257 3LL200 258 3RB3418 258 400059P 226 3EL3414 257 3LL34 258 3RB3438 258 400059 226 3EL3412F 257 3M100 258 3RB3814 258 400069P 226 3EL3438 257 3M112 258 3RB3818 258 400069 226 3EL3458 257 3M114 258 3RW1116A 260 4001C-H 65 3EL3458F 257 3M1214 258 3SE100 257 4001C 65 3EL3458HB 258 3M1238 258 3SE112 257 4001N-E2H 66 3EL34F 257 3M12 258 3SE114 257 4001N-EH 66 270 Index Part Number Page Part Number Page Part Number Page Part Number Page 4001N-H 65 4200-0213N 222 4231N-B101S 223 4243N-B528V 222 4001N 65 4200-0214N 222 4231N-B101T 223 4247N-B111 223 4001XL-E2H 66 4200-0215N 222 4231N-B102D 223 4247N-B119 223 4001XL-EH 66 4200N-0017 201, 228 4231N-B102S 223 4247N-B121 223 4001XL-H 65 4200N-0018 201, 228 4231N-B102T 223 4247N-B129 223 4001XL 65 4200N-0020 226 4231N-B103D 223 4247N-C111 223 402105-030 201 4200N-0021 226 4231N-B103S 223 4247N-C119 223 402265P 221 4200N-0023 226 4231N-B103T 223 4247N-C121 223 4081B0N 226 4200N-0024 226 4240N-B010 223 4247N-C129 223 40867BN 226 4200N-0025 226 4240N-B010V 223 4263N-B323D 222 40868BN 226 4200N-0026 226 4240N-B020 223 4263N-B323DV 222 40J 264 4201N-B102 223 4240N-B020V 223 4263N-B323S 222 4101C-25 70 4201N-B103 223 4240N-B121D 223 4263N-B323SV 222 4101C-H 65 4201N-B104 223 4240N-B121S 223 4263N-B324D 222 4101C 65 4211-035 97 4240N-B122D 223 4263N-B324DV 222 4101N-E2H 66 4213-0504V 216 4240N-B122S 223 4263N-B324S 222 4101N-EH 66 4214-1502V 220 4240N-B123D 223 4263N-B324SV 222 4101N-H 65 4214-1503V 220 4240N-B123S 223 4263N-B523D 222 4101N 65 4214-1504V 220 4240N-F110 223 4263N-B523DV 222 4101XL-25 70 4214-1507V 220 4240N-F110V 223 4263N-B523S 222 4101XL-E2H 66 4214-1508V 220 4240N-F120 223 4263N-B523SV 222 4101XL-EH 66 4214-2502V 220 4240N-F120V 223 4263N-B524D 222 4101XL-H 65 4214-2503V 220 4240N-F150 223 4263N-B524DV 222 4101XL 65 4214-2504V 220 4240N-F150V 223 4263N-B524S 222 4111-035 97 4214-2507V 220 4241N-B120U 223 4263N-B524SV 222 413003 228 4214-2508V 220 4241N-B121D 222 430001 226 413004 228 4221N-B122 221 4241N-B121S 222 430002 226 413005 228 4221N-B122V 221 4241N-B121T 222 430201V 226 413013 228 4221N-B123 221 4241N-B122D 222 430201 226 413014 228 4221N-B123V 221 4241N-B122S 222 430202V 226 413015 228 4221N-B124 221 4241N-B122T 222 430202 226 413016 228 4221N-B124V 221 4241N-B123D 222 44J 264 413018 228 4221N-B127 221 4241N-B123S 222 461021-1 244 4200-0010 225 4221N-B127V 221 4241N-B123T 222 461031-4 244 4200-0019 228 4221N-B128 221 4242N-B300 222 461031-3 244 4200-0020 225 4221N-B128V 221 4242N-B322D 222 461031-2 244 4200-0025 225 4222N-B322 221 4242N-B322S 222 461031-1 244 4200-0030 225 4222N-B323 221 4242N-B322T 222 4621AA10000 243 4200-0040 225 4222N-B324 221 4242N-B323D 222 4621AA11313 243 4200-0050 225 4223N-B322 221 4242N-B323S 222 4621AA20000 243 4200-0060 201 4223N-B322V 221 4242N-B323T 222 4621AA30000 243 4200-0061 201 4223N-B323 221 4243N-B322 222 4621AA31414 243 4200-0062 201 4223N-B323V 221 4243N-B322V 222 4621AA40000 243 4200-0063 201 4223N-B324 221 4243N-B323 222 4621AA41414 243 4200-0004E 225 4223N-B324V 221 4243N-B323V 222 4621AA41515 243 4200-0004V 225 4223N-B327 221 4243N-B324 222 4621AA10000-100 243 4200-0010V 225 4223N-B327V 221 4243N-B324V 222 4621BA01313 243 4200-0015N 228 4223N-B328 221 4243N-B327 222 4621BA11313 243 4200-0016N 228 4223N-B328V 221 4243N-B327V 222 4621BA41414 243 4200-0020V 225 4223N-B522 221 4243N-B328 222 4622AA40000 243 4200-0030V 225 4223N-B522V 221 4243N-B328V 222 4622AA50000 243 4200-0040V 225 4223N-B523 221 4243N-B522 222 4622AA51616 243 4200-0050V 225 4223N-B523V 221 4243N-B522V 222 4622AA61717 243 4200-0111N 222 4223N-B524 221 4243N-B523 222 4622BA51616 243 4200-0112N 222 4223N-B524V 221 4243N-B523V 222 4622BA61717 243 4200-0113N 222 4223N-B527 221 4243N-B524 222 4622BA50000-100 243 4200-0114N 222 4223N-B527V 221 4243N-B524V 222 4622BA50000-200 243 4200-0115N 222 4223N-B528 221 4243N-B527 222 463020 244 4200-0211N 222 4223N-B528V 221 4243N-B527V 222 463051 244 4200-0212N 222 4231N-B101D 223 4243N-B528 222 463061 244 271 Index Part Number Page Part Number Page Part Number Page Part Number Page 463080N 244 56454136 248 738100 261 7RB3412 261 464621AA10000 243 56454137 248 738112 261 7RB3414 261 464621AA20000 243 56454232 248 7433-2502 224 7RB3814 261 464621AA30000 243 56454233 248 7433-2503 224 7SE100 261 464621AA4000 243 56454234 248 7433-2515 224 7SE112 261 464622AA51616 243 56454235 248 7433-2601 224 7SE114 261 464622AA61717 243 56454236 248 7433-2608 224 7SE12 261 464622BA51616 243 56454237 248 7433-2610 224 7SE14 261 464622BA61717 243 56J 264 7433-2613 224 7SE200 261 46463020 244 626012 260 7433-3314 224 7SE300 261 46463024 244 626014 260 7433-3316 224 7SE34 261 46463051 244 626320N 260 7560C-GM15 68 7SE38 261 46463061 244 626325N 260 7560C-GM30 68 7TT100 261 46473070 244 626425N 260 7560C 67 7TT112 261 473070 244 626525N 260 7560N-GM15 68 7TT114 261 48J 264 626532N 260 7560N-GM30 68 7TT12 261 4JM 264 626632N 260 7560N 67 7TT14 261 500615-060 233 626638N 260 7560XL-GM15 68 7TT200 261 502069 233 626651N 260 7560XL-GM30 68 7TT300 261 5042015 248 626751N 260 7560XL 67 7TT34 261 5042016 248 627320N 260 7700C 69 8000-0003 118 5042017 248 627325N 260 7700N 69 8000-0007 116 5042019 248 627420N 260 7700XL 69 8000-0008 116 504203-HYP 233 627425N 260 78-100 249 8000-0010 118 504210 233 627432N 260 78-112 249 8000-0015 118 5059-1310-D011 90 627525N 260 78-114 249 8000-0017 118 5059-1311-D011 90 627532N 260 78-12 249 8000-0018 118 5059-3610-D011 90 627632N 260 78-14 249 8000-0021 118 5059-3611-D011 90 627638N 260 78-200 249 8000-0043 118 506530V 240 627751N 260 78-300 249 8000-0056 87 506531V 240 64J 264 78-34 249 8000-343-236 91 506532V 240 6500C 67 78-38 249 8000-533-236 93 520005 228 6500N 67 7F100 261 8000-533-250 93 5206C-H 112 6500XL 67 7F12 261 8000-541-236 91 5206C 112 65-BS205 137, 161, 167, 201 7F14 261 8000-542-136 91 5210C-H 112 65MN011X1.3 202 7F18 261 8000-543-136 91 5210C 112 65VBS0113-13 202 7F200 261 8000-543-138 91 52169 233 6JM 264 7F34 261 8000-543-210 92 52520005 228 6J 264 7F38 261 8000-543-220 92 52J 264 7100112 261 7FC100 261 8000-543-236 91 5315C-HX 113 7100400 261 7FC112 261 8000-543-238 91 5315C-X 113 7112134 261 7FC12 261 8000-543-250 92 5320C-HX 113 7114158 261 7FC14 261 8000-543-290 92 5320C-X 113 712112 261 7FC200 261 8000-543-936 91 5321C-H 114 712118 261 7FC300 261 8000-547-189 91 5321C 114 712200 261 7FC34 261 8000-643-236 91 5322C-H 114 714112 261 7LL100 261 8006-543-250 92 5322C 114 7141200 261 7LL112 261 8007-543-836 94 5324C-H 113 714300 261 7LL114 261 8007-543-850 94 5324C 113 714400 261 7LL12 261 8007-591-236 94 5325C-HX 113 714600 261 7LL14 261 8007-593-836 94 5325C-X 113 7200200 261 7LL200 261 8007-593-850 94 5330C-HX 113 7200212 261 7LL300 261 80112-F-00PP 227 5330C-X 113 7200300 261 7LL34 261 801-F-00PP 227 53702 114 7200312 261 7RB10012 261 8020-503-250 93 53703 115 7200400 261 7RB10034 261 8020-513-236 93 56454132 248 7200500 261 7RB1214 261 8020-833-238 93 56454133 248 7200600 261 7RB1238 261 8027 227, 260 56454134 248 734138 261 7RB1418 261 8030-813-239 91 56454135 248 734400 261 7RB200112 261 8030-863-239 93 272 Index Part Number Page Part Number Page Part Number Page Part Number Page 8034-F-00PP 227 90A2CMxxE00 196 9205C 18 9306C-HM3C 38 8050-305-426 100 90A2CMxxE25 196 9206C 20 9306C-HM3C-3U 39 8090-212-246 93 90A2CMxxE40 196 9206S 20 9306C-HM5C 38 8090-801-278 93 90A2CMxxE65 196 9208C 21 9306C-HM5C-3U 39 8090-802-289 93 90A2CMxxE80 196 9213P 23 9306S-HM1C 38 8090-902-278 93 90A2FPx.x 195 9232C-SP 59 9306S-HM1C-3U 39 8095-902-260 93 90B1CMxxE00 196 9233C-SP 59 9306S-HM3C 38 8304B-HM5C 126 90B1CMxxE25 196 9243P-SP 58 9306S-HM3C-3U 39 8304BV 126 90B1CMxxE40 196 9260P-R 24 9306S-HM5C 38 8304B 126 90B1CMxxE65 196 9260P 24 9306S-HM5C-3U 39 8630001 244 90B1CMxxE80 196 9262C-C 25 9307C-GM10 40 8630011 244 90B1FPx.x 195 9262S-C 25 9307C-GM12 40 8630020S 244 90B2CM02E00 169 9262S-CR 25 9307CWS-GM12 41 8630024S 244 90B2CM03E00 169 9263C-BT 27 9308C-GM25 42 8630D24S 244 90B2CM04E00 169 9263C-C 27 9308C-PM15 42 8-005-01 101 90B2CM05E00 169 9263C-CR 27 9308CX 42 8-006-01 101 90B2CM06E00 169 9263C-CR-SP 26 9325-043-101 98 8-007-01 101 90B2CM07E00 169 9263C-CR-SP-B 26 9332C-HM1C-SP 60 8-126-00 101 90B2CM10E00 169 9263C-C-SP 26 9332C-HM5C-SP 60 8-145-00 101 90B2CM15E00 169 9263S-C 27 9342P-HM1C-5SP 57 8-150-01 101 90B2CM20E00 169 9263S-CR 27 9342P-HM5C-5SP 57 8-205-00 101 90B2CM30E00 169 9263S-C-SP 26 9343P-GM10-SP 57 8-727-00 104 90B2CMxxE00 196 9302C-HM1C 28 9343P-GM10Y-SP 57 8JM 264 90B2CMxxE25 196 9302C-HM2C 28 9343P-GM6-SP 57 8J 264 90B2CMxxE40 196 9302C-HM4C 28 9343P-GM6Y-SP 57 90029 11 90B2CMxxE65 196 9302CT-GM1 28 9402C-540 44 9006C-O 11 90B2CMxxE80 196 9302S-HM1C 28 9402C-1000 44 9006C-O-SP 12 90B2FPx.x 195 9302S-HM2C 28 9402C-1000L 44 9006P-O 13 90FFB12 249 9302S-HM4C 28 9402C-1000S 44 9008C-O 11 90FFB14 249 9302ST-GM1 28 9402C-540Q 44 9008P-O 13 90FFB18 249 9303C-HM1C 30 9402C-540S 44 9016C-O 11 90FFB38 249 9303C-HM1C-SP 32 9403C-540 44 9016C-O-SP 12 90FFL12 249 9303C-HM2C 30 9403C-1000 44 9016P-O 13 90FFL14 249 9303C-HM2C-SP 32 9403C-1000L 44 9018C-O 11 90FFL18 249 9303C-HM3C 30 9403C-1000L-SP 43 9018P-O 13 90FFL38 249 9303C-HM3C-SP 32 9403C-1000-MTZ 44 9028C-O 11 90FMB12 249 9303C-HM4C 30 44 9028C-O-SP 12 90FMB14 249 9303C-HM4C-SP 32 9403C-1000-MTZKIT 902-100 98 90FMB38 249 9303C-HM5C 30 9403C-1000S 44 902-200 98 90FML12 249 9303C-HM5C-SP 32 9403C-1000-SP 43 9047C-BSP 14 90FML14 249 9303P-HM1C 34 9403C-540Q 44 9047C-SP 14 90FML38 249 9303P-HM2C 34 9403C-540Q-SP 43 9047C 14 90LD03F110 190 9303P-HM3C 34 9403C-540S 44 90-HBF 249 90LD04F110 190 9303P-HM4C 34 9403C-540-SP 43 90A1CMxxE00 196 90LD05F110 190 9303P-HM5C 34 9403C-540S-SP 43 90A1CMxxE25 196 90LD06F110 190 9303S-HM1C 30 9403P-540 44 90A1CMxxE40 196 9202C 15 9303S-HM1C-SP 32 9403P-1000 44 90A1CMxxE65 196 9202S-R 15 9303S-HM2C 30 9403P-1000L 44 90A1CMxxE80 196 9202S 15 9303S-HM2C-SP 32 9403P-1000S 44 90A1FPx.x 195 9203C-R 16 9303S-HM3C 30 9403P-540Q 44 90A2CM02E00 169 9203C-R-SP 17 9303S-HM3C-SP 32 9403P-540S 44 90A2CM03E00 169 9203C-SP 17 9303S-HM4C 30 9403S-540 44 90A2CM04E00 169 9203C 16 9303S-HM4C-SP 32 9403S-1000 44 90A2CM05E00 169 9203P-S 22 9303S-HM5C 30 9403S-1000L 44 90A2CM06E00 169 9203P-SR 22 9303S-HM5C-SP 32 9403S-1000S 44 90A2CM07E00 169 9203S-R 16 9305C-HM3C 36 9403S-540Q 44 90A2CM10E00 169 9203S-SP 17 9305C-HM3C-BSP 37 9403S-540S 44 90A2CM15E00 169 9203S 16 9305C-HM3C-SP 37 94-389-01 97 90A2CM20E00 169 9205C-BSP 19 9306C-HM1C 38 94-389-00 97 90A2CM30E00 169 9205C-SP 19 9306C-HM1C-3U 39 94-712-00 104 273 Index Part Number Page Part Number Page Part Number Page Part Number Page 94-716-00 104 9910-DBS200 83 9910-KIT2202 86 9950-16180 232 94-717-00 104 9910-DP423 74 9910-KIT2203 86 9950-16280 232 94-718-00 104 9910-DP423GRGI 74 9910-KIT2204 86 9950-16320 232 94-719-00 104 9910-DP573 74 9910-KIT2347 86 9950-100BA 254 94-720-05 104 9910-DP573GRGI 74 9910-KIT2349 86 9950-100BB 254 94-720-00 104 9910-DP763 74 9910-KIT2364 86 9950-100BD 255 94-721-00 104 9910-DP763GRGI 74 9910-KIT2365 86 9950-100BF 255 94-723-00 104 9910-GH50 88 9910-KIT2370 86 9950-100C 254 94-724-00 104 9910-GR40 88 9910-KIT2374 86 9950-100E 255 94-725-00 104 9910-GS25 74, 88 9910-KIT2376 86 9950-100G 255 94-732-00 104 9910-GS35S 74, 88 9910-KIT2378 86 9950-100H 255 94-733-00 104 9910-GS40GI 88 9910-KIT2388 86 9950-100NA 254 94-734-00 104 9910-GS50GI 88 9910-KIT2389 86 9950-100NB 254 94-735-00 104 9910-HYD1570 87 9910-KIT2408 86 9950-100ND 255 94-736-00 104 9910-HYD2495 87 9910-KIT2409 86 9950-100NF 255 94-737-00 104 9910-HYD5312 87 9910-KIT2423 86 9950-125BA 254 94-738-00 104 9910-KIT1640 87 9910-KIT2444 86 9950-125BB 254 9700B 126 9910-KIT1642 87 9910-KIT2445 86 9950-125BD 255 9700S 126 9910-KIT1702 86 9910-KIT2446 86 9950-125BF 255 9732C-SPX 60 9910-KIT1703 86 9910-KIT2456 86 9950-125C 254 9733C-SPX 60 9910-KIT1704 86 9910-KIT2457 86 9950-125E 255 9742P-050SPT 58 9910-KIT1706 86 9910-KIT2479 86 9950-125G 255 9742P-050SPT3 58 9910-KIT1707 86 9910-KIT2480 86 9950-125H 255 9742P-075SPT3 58 9910-KIT1708 86 9910-KIT55357 87 9950-125NA 254 9910-BMH50 88 9910-KIT1710 86 9910-RM40 88 9950-125NB 254 9910-D30 78 9910-KIT1711 86 9910-VDR50 88 9950-125ND 255 9910-D50 79 9910-KIT1720 86 9920-248 239 9950-125NF 255 9910-D70 75 9910-KIT1721 86 9920-261703-69 238 9950-150BA 254 9910-D115 75 9910-KIT1722 86 9920-35.1703.67 238 9950-150BB 254 9910-D135 76 9910-KIT1723 86 9920-35.1802.56 238 9950-150BD 255 9910-D160 76 9910-KIT1724 86 9920-KIT10/11 239 9950-150BF 255 9910-D250 77 9910-KIT1725 86 9940-9750NRL 125 9950-150C 254 9910-D252 77 9910-KIT1730 86 9940-9751NRL 125 9950-150E 255 9910-D403 78 9910-KIT1734 86 9940-9753NRL 125 9950-150G 255 9910-D503 79 9910-KIT1881 86 9950-0001 160 9950-150H 255 9910-D813 80 9910-KIT1882 86 9950-0022 203 9950-150NA 254 9910-D1064 80 9910-KIT1904 86 9950-0023 203 9950-150NB 254 9910-D1265 81 9910-KIT1908 86 9950-0024 201, 228 9950-150ND 255 9910-D1064GRGI 80 9910-KIT1916 86 9950-0027 201, 228 9950-150NF 255 9910-D115GR34 75 9910-KIT1917 86 9950-0028 203 9950-200BA 254 9910-D252GRGI 77 9910-KIT1919 86 9950-0030 244 9950-200BB 254 9910-D252GRGI58 77 9910-KIT1920 86 9950-0031 203 9950-200BD 255 9910-D252GRGIAP 77 9910-KIT1963 86 9950-0033 189 9950-200BF 255 9910-D30AP-A 78 9910-KIT1964 86 9950-08050 232 9950-200C 254 9910-D30-B-GRGI 78 9910-KIT1965 86 9950-08120 232 9950-200E 255 9910-D30GRGI 78 9910-KIT1972 86 9950-08240 232 9950-200G 255 9910-D403GRGI 78 9910-KIT1984 86 9950-075BA 254 9950-200H 255 9910-D503GRGI 79 9910-KIT1987 86 9950-075BB 254 9950-200NA 254 9910-D503GRGI34 79 9910-KIT1990 88 9950-075BD 255 9950-200NB 254 9910-D50AP-A 79 9910-KIT1992 86 9950-075BF 255 9950-200ND 255 9910-D50-B 79 9910-KIT2024 86 9950-075C 254 9950-200NF 255 9910-D70GR 75 9910-KIT2026 86 9950-075E 255 9950-300BA 254 9910-D813GRGI 80 9910-KIT2053 86 9950-075G 255 9950-300BB 254 9910-DBA110 81 9910-KIT2100 86 9950-075H 255 9950-300BD 255 9910-DBA140 82 9910-KIT2110 86 9950-075NA 254 9950-300BF 255 9910-DBA160 82 9910-KIT2111 86 9950-075NB 254 9950-300C 254 9910-DBA200 83 9910-KIT2113 86 9950-075ND 255 9950-300E 255 9910-DBS110 81 9910-KIT2114 86 9950-075NF 255 9950-300G 255 9910-DBS140 82 9910-KIT2200 86 9950-12060 232 9950-300H 255 9910-DBS160 82 9910-KIT2201 86 9950-12240 232 9950-300NA 254 274 Index Part Number Page Part Number Page Part Number Page Part Number Page 9950-300NB 254 A1234S 262 A-200SS 254 ATR-RED 177 9950-300ND 255 A1234 257 A-300SS 254 ATR-WHITE 177 9950-300NF 255 A1238B 262 A-750SS 254 ATR-YELLOW 177 9950-55203 232 A1238S 262 AA10034P 262 ATW-11001 139 9951-2050B 248 A1238 257 AA100P 262 ATW-11002 139 9951-2050N 248 A1258B 262 AA112P 262 ATW-11003 139 9951-2075B 248 A1258S 262 AA114P 262 ATW-11004 139 9951-2075N 248 A1258 257 AA200P 262 ATW-11005 139 9951-2100B 248 A12B 262 AA34P 262 ATW-110015 139 9951-2100N 248 A12S 262 ADI-11001 149 AVI-11001 143 9951-2100UF 253 A12 257 ADI-11002 149 AVI-11002 143 9951-2125B 248 A1412B 262 ADI-11003 149 AVI-11003 143 9951-2125N 248 A1412S 262 ADI-11004 149 AVI-11004 143 9951-2150B 248 A1412 257 ADI-110015 149 AVI-11005 143 9951-2150N 248 A14316 257 AE2650 243 AVI-11006 143 9951-2200B 248 A1438B 262 AE2651 243 AVI-11008 143 9951-2200N 248 A1438S 262 AE2652 243 AVI-11010 143 9951-2200UF 253 A1438 257 AE2654 243 AVI-110015 143 9951-2300UF 253 A14516 257 AF1214 257 AVI-110025 143 9951-3050B 248 A14B 262 AF1234 257 AVI-8001 179 9951-3050N 248 A14S 262 AF1238 257 AVI-8002 179 9951-3075B 248 A14 257 AF1258 257 AVI-8003 179 9951-3075N 248 A1814B 262 AF12 257 AVI-8004 179 9951-3100B 248 A1814S 262 AF1438B 262 AVI-80015 179 9951-3100N 248 A1814 257 AF1438 257 AVI-80025 179 9951-3125B 248 A18316 257 AF14 257 AVI-OC-80025 187 9951-3125N 248 A1838B 262 AF3412 257 AVI-OC-80015 187 9951-3150B 248 A1838S 262 AF3438 257 AVI-OC-8004 187 9951-3150N 248 A1838 257 AF34 257 AVI-OC-8003 187 9951-3200B 248 A18516 257 AF3812 257 AVI-OC-8002 187 9951-3200N 248 A200 257 AF3814 257 AXI-11002 155 9A100 261 A34100B 262 AF38 257 AXI-11003 155 9A112 261 A34100S 262 AMT-15007 171 AXI-11004 155 9A114 261 A34100 257 AMT-15008 171 AXI-11005 155 9A12 261 A3412B 262 AMT-15010 171, 238 AXI-11006 155 9A1412 261 A3412S 262 AMT-15012 171, 238 AXI-110015 155 9A1438 261 A3412 257 AMT-15015 171, 238 AXI-110025 155 9A14 261 A3414 257 AMT-15018 171, 238 AXI-8002 155, 180 9A200 261 A3438B 262 AMT-15020 171, 238 AXI-8003 155, 180 9A300 261 A3438S 262 AMT-15023 171, 238 AXI-8004 155, 180 9A34 261 A3438 257 APM-BLACK 165 AXI-8005 155, 180 9A3812 261 A3458B 262 APM-BLUE 165 AXI-8006 155, 180 9A38 261 A3458S 262 APM-GRAY 165 AXI-80015 155, 180 A100114 257 A3458 257 APM-GREEN 165 B100 260 A10034 257 A34B 262 APM-ORANGE 165 B12 227, 260 A100B 262 A34S 262 APM-RED 165 B301AB 251 A100S 262 A34 257 APM-YELLOW 165 B33B 263 A100 257 A3812B 262 ASG1604 251 B3412 260 A112114 257 A3812S 262 ASG160 251 B34B 263 A112 257 A3812 257 ASG4004 251 B34 260 A114100 257 A3814B 262 ASG400 251 B35S 262 A114112 257 A3814S 262 ASG604 251 B35 260 A11434 257 A3814 257 ASG60 251 B-100SS 254 A114 257 A38516 257 ATR-BLACK 177 B-150SS 254 A12100 257 A3858 257 ATR-BLUE 177 B-200SS 254 A1214B 262 A38B 262 ATR-BROWN 177 B-300SS 254 A1214S 262 A38S 262 ATR-GRAY 177 B-750SS 254 A1214 257 A38 257 ATR-GREEN 177 BC100R 228 A12316 257 A-100SS 254 ATR-LILAC 177 BC100 228 A1234B 262 A-150SS 254 ATR-ORANGE 177 BC114 228 275 Index Part Number Page Part Number Page Part Number Page Part Number Page BC34R 228 CA9203P-S 127 CAP09-20 201 DP-200SS 255 BG-2910-0026 224 CA9303C-HM4C 127 CAP10-20 201 DP-300SS 255 BG-3430-0790 224 CA9303P-HM4C 127 CAP30-20 163, 200, 201 DP-750SS 255 BG-400275N 228 CA9910-D115 127 CPV007 228 E3412B 263 BG-4200-0060 201 CA9910-D30 127 CRC-13 175 E3412 259, 260 BG-4200-0061 201 CA9910-D30GRGI 127 CRC-23 175 E3438 259 BG-4200-0062 201 CA9910-D70 127 CRC-31 181 E34B 263 BG-4200-0063 201 CA9910-KIT1640 127 CRC-35 181 E34 259, 260 BG-4247N-B111 223 CAP00-01 CRC-45 175 E80-015 184, 199 BG-4247N-B119 223 149, 159, 184, 199, 201 175 E80-01 184, 199 BG-4247N-B121 223 CRC-56 181 E80-02 184, 199 BG-4247N-B129 223 147, 149, 159, 184, 186, 199, 201 CRC-46 CS301AF0.4-65 198 E80-03 184, 199 BG-4247N-C111 223 CS301AF0.7-80 198 E80-04 184 BG-4247N-C119 223 BG-4247N-C121 223 BG-4247N-C129 CAP00-02 CAP00-03 147, 149, 159, 184, 186, 199, 201 CAP00-04 147, 149, 159, 184, 186, 201 CS301AF1.2-105C 198 E80-05 184 CS301AF1.6-100 198 E80-06 184 223 CAP00-05 147, 159, 184, 201 CS301AFD0.7-80 198 E80-08 184 BG-7433-2502 224 CAP00-06 147, 159, 184, 201 CS301AFD1.2-105 198 E-100SS 255 BG-7433-2503 224 CAP00-08 147, 159, 184, 201 CS301MNF-W 198 E-150SS 255 BG-7433-2515 224 CAP00-10 159, 201 D252GRGI-25 83 E-200SS 255 BG-7433-2601 224 CAP00-015 D252GRGI-55 83 E-300SS 255 BG-7433-2608 224 147, 149, 159, 184, 199, 201 E-750SS 255 224 159, 201 84 BG-7433-2610 CAP00-15 D30GRGI-65 EL10012 257 224 159, 185, 201 78, 84 BG-7433-2613 CAP00-20 D30HRGI EL10034 257 224 147, 201 84 BG-7433-3314 CAP00-025 D30HRGI-65 EL100HB 258 224 201 84 BG-7433-3316 CAP00-035 D30HRGI-65E EL100 257 252 139, 179, 201 259 BG-UFC0100E-A-S CAP01-01 D34100 EL112HB 258 252 139, 179, 187, 201 263 BG-UFC0150E-A-S CAP01-02 D3412B EL112 257 252 139, 179, 187, 201 259 BG-UFC0200E-A-S CAP01-03 D3412 EL114100 257 252 139, 179, 187, 201 259 BG-UFC0300E-A-S CAP01-04 D3414 EL114112 257 260 139, 201 263 C100 CAP01-05 D3438B EL11434 257 263 201 259 C12B CAP01-06 D3438 EL114HB 258 260 201 263 C12NPT CAP01-08 D3458B EL114 257 262 201 259 C12S CAP01-10 D3458 EL12100 257 260 139, 179, 187, 201 263 C12 CAP01-015 D34B EL1214HB 258 260 201 259 C14 CAP01-15 D34 EL1214 257 263 201 84 C34B CAP01-20 D403GRGI-65 EL1234F 257 262 179, 187, 201 84 C34S CAP01-025 D403HRGI EL1234 257 260 201 84 C34 CAP04-01 D403HRGI-65 EL1238HB 258 263 182, 201 84 C38B CAP04-02 D403HRGI-65E EL1238 257 260 182, 201 85 C38 CAP04-03 D503HRGI EL1258F 257 263 182, 201 85 C58B CAP04-04 D503HRGI-65 EL1258 257 260 182, 201 85 C58 CAP04-05 D503HRGI-65E EL12HB 258 254 182, 201 255 C-100SS CAP04-06 D-100SS EL12 257 254 201 255 C-150SS CAP04-08 D-150SS EL1412 257 254 201 255 C-200SS CAP04-10 D-200SS EL1438F 257 254 201 255 C-300SS CAP04-015 D-300SS EL1438 257 254 201 255 C-750SS CAP04-15 D-750SS EL14516 257 127 165, 176, 201 255 CA5210C CAP04-20 DC-100SS EL1458 257 127 201 255 CA5320C-HRX CAP04-025 DC-150SS EL14F 257 127 201 255 CA5321C-H CAP05-01 DC-200SS EL14HB 258 127 201 255 CA5324C CAP05-02 DC-300SS EL14 257 127 201 255 CA6500C CAP05-03 DC-750SS EL1814 257 127 201 175, 181 CA6500N CAP05-04 DCC-01 EL18316 257 127 201 175, 181 CA6500XL CAP05-05 DCC-02 EL1838 257 127 201 175, 181 CA7560C CAP05-06 DCC-03 EL18516 257 127 201 175, 181 CA7560N CAP05-08 DCC-04 EL200HB 258 127 201 175, 181 CA7560XL CAP05-015 DCC-05 EL200 257 127 DCC-07 175, 181 EL34100 257 CA9006P-O 127 175, 177, 178, 181, 201 175, 181 CA9006C-O CAP05-20 DCC-06 DP-100SS 255 EL3412F 257 CA9202C 127 DP-150SS 255 EL3412 257 CAP05-025 201 276 Index Part Number Page Part Number Page Part Number Page Part Number Page EL3414 257 F80-04 159 FC-GA110-03 141 FNAE-112100 254 EL3438 257 F80-05 159 FC-GA110-04 141 FNAE-112112 254 EL3458F 257 F80-06 159 FC-GA110-05 141 FNAE-112114 254 EL3458HB 258 F80-08 159 FC-GA110-015 141 FNAE-114100 254 EL3458 257 F80-10 159 FC-GA110-025 141 FNAE-114114 254 EL34F 257 F80-15 159 FC-GA110-035 141 FNAE-200200 254 EL34HB 258 F80-20 159 FC-TR110-01 153 FNAE-3412 254 EL34 257 F-100SS 255 FC-TR110-02 153 FNAE-3434 254 EL3812F 257 F-150SS 255 FC-TR110-03 153 FNAE-3458 254 EL3812 257 F-200SS 255 FC-TR110-04 153 FNAS-10012 254 EL3814F 257 F-300SS 255 FC-TR110-05 153 FNAS-10034 254 EL3814HB 258 F-750SS 255 FC-TR110-06 153 FNAS-100100 254 EL3814 257 FC100 258 FC-TR110-08 153 FNAS-1212 254 EL38516 257 FC112 258 FC-TR110-10 153 FNAS-112100 254 EL3858 257 FC114 258 FC-TR110-15 153 FNAS-112112 254 EL38F 257 FC12B 263 FC-TR110-015 153 FNAS-112114 254 EL38HB 258 FC12 258 FC-TR80-01 153 FNAS-114100 254 EL38 257 FC14B 263 FC-TR80-015 153 FNAS-114114 254 EL58HB 258 FC200 258 FC-TR80-02 153 FNAS-200200 254 ELD3412 259 FC34 258 FC-TR80-03 153 FNAS-3412 254 ELD3414 259 FC-AVI-110025 143 FC-TR80-04 153 FNAS-3434 254 ELD3438 259 FC-AVI-110015 143 FC-TR80-05 153 FNAS-3458 254 ELD3458 259 FC-AVI-11010 143 FC-TR80-06 153 FNCAP-100 254 ELD34 259 FC-AVI-11008 143 FC-TR80-08 153 FNCAP-100N 124 ESI-11002 167 FC-AVI-11006 143 FC-TR80-10 153 FNE-10034 124 ESI-11003 167 FC-AVI-11005 143 FC-TR80-15 153 FNE-100100 124 ESI-11004 167 FC-AVI-11004 143 FC-ULD120-015 135 FNS-10012 124 ESI-11005 167 FC-AVI-11003 143 FC-ULD120-02 135 FNS-10034 124 ESI-11006 167 FC-AVI-11002 143 FC-ULD120-025 135 FNS-100100 124 ESI-110015 167 FC-AVI-11001 143 FC-ULD120-03 135 G3412 259 ESI-110025 167 FC-AXI-110015 155 FC-ULD120-04 135 G3414 259 F100 258 FC-AXI-80015 155, 180 FC-ULD120-05 135 G34 259 F110-01 159 FC-AXI-11006 155 FC-ULD120-06 135 G40004 233 F110-02 159 FC-AXI-11005 155 FC-ULD120-08 135 GA110-02 141 F110-03 159 FC-AXI-11004 155 FC-VP110-02 151 GA110-03 141 F110-04 159 FC-AXI-11003 155 FC-VP110-03 151 GA110-04 141 F110-05 159 FC-AXI-11002 155 FC-VP110-04 151 GA110-05 141 F110-06 159 FC-AXI-8006 155, 180 FC-VP110-05 151 GA110-015 141 F110-08 159 FC-AXI-8005 155, 180 FC-VP110-06 151 GA110-025 141 F110-015 159 FC-AXI-8004 155, 180 FC-VP110-08 151 GA110-035 141 F110-10 159 FC-AXI-8003 155, 180 FC-VP110-10 151 GAT110-035 137 F110-15 159 FC-AXI-8002 155, 180 FC-VP110-15 151 GAT110-025 137 F110-20 159 FC-ESI-110025 167 FC-VP110-015 151 GAT110-08 137 F112 258 FC-ESI-110015 167 FC-VP110-025 151 GAT110-06 137 F114 258 FC-ESI-11015 167 FC-VP110-035 151 GAT110-05 137 F12B 263 FC-ESI-11010 167 FC-VP80-015 151 GAT110-04 137 F12 258 FC-ESI-11008 167 FC-VP80-02 151 GAT110-03 137 F14B 263 FC-ESI-11006 167 FC-VP80-03 151 GAT110-02 137 F14 258 FC-ESI-11005 167 FC-VP80-04 151 GAT110-025A 137 F18 258 FC-ESI-11004 167 FC-VP80-05 151 GAT110-02A 137 F200 258 FC-ESI-11003 167 FC-VP80-06 151 GAT110-035A 137 F34 258 FC-ESI-11002 167 FC-XT010 189 GAT110-03A 137 F38B 263 FC-ESI-110015P 167 FC-XT015 189 GAT110-04A 137 F38 258 FC-ESI-11002P 167 FC-XT020 189 GAT110-05A 137 F65-005 197 FC-ESI-11003P 167 FC-XT024 189 GAT110-06A 137 F80-0067 159, 197 FC-ESI-11004P 167 FC-XT043 189 GAT110-08A 137 F80-015 159 FC-ESI-11005P 167 FM-1100 103 GG10000 250 F80-01 159 FC-ESI-11006P 167 FM-1100i 103 GG1000 250 F80-02 159 FC-ESI-11020P 167 FNAE-10034 254 GG1004 250 F80-03 159 FC-GA110-02 141 FNAE-100100 254 GG100 250 277 Index Part Number Page Part Number Page Part Number Page Part Number Page GG15000 250 J3412 259 NF1614 227 RB3814 258 GG1500 250 K8412 227 NS12 264 RB3818 258 GG160 250 K8414 227 NS17 264 RI167 249 GG2000 250 K8438 227 NS21 264 RW1116A 260 GG200 250 LA24 248 NS28 264 RW1116B 260 GG3000 250 LA5 248 NS32 264 RW1116C 260 GG300 250 LD110-02 147 NS4 264 RW1116D 260 GG30 250 LD110-03 147 NS7 264 SA12B 263 GG4000 250 LD110-04 147 NS8 264 SA38B 263 GG400 250 LD110-05 147 NTL12 227 SE100 257 GG5000 250 LD110-06 147 NTL14 227 SE112 257 GG6000 250 LD110-08 147 NTL34 227 SE114 257 GG600 250 LD110-015 147 NTL38 227 SE12B 262 GG604 250 LD110-025 147 NTL58 227 SE12 257 GG60 250 LD80-02 147 NTT12 227 SE1445 258 GRD120-025 145 LD80-03 147 NTT34 227 SE14B 262 GRD120-015 145 LD80-04 147 NTT38 227 SE14 257 GRD120-08 145 LD80-05 147 NTT58 227 SE200 257 GRD120-06 145 LD80-06 147 OCI-8002 186 SE3445 258 GRD120-05 145 LD80-08 147 OCI-8003 186 SE34 257 GRD120-04 145 LD80-015 147 OCI-8004 186 SE38B 262 GRD120-03 145 LL100 258 PC1/2F-235120 232 SE38 257 GRD120-02 145 LL112 258 PC1/2F-36075 232 SF-1100 103 GRD120-01 145 LL114 258 PC1/2F-36075-PV 232 SF-1105 103 GTT1214 258 LL12 258 216 SF-1100-110V 103 GTT3414 258 LL14B 263 PK-4223NB524PSE 259 LL18B 263 198 102 H34 PP301AF0.4-65 SF-1100-PTS 161 LL200 258 198 102 HF140-08 PP301AF0.7-80 SF-1100-PTSi 161 LL34 258 198 102 HF140-10 PP301AF0.7-80W SF-1100-PTSi-00 161 LT2 264 198 102 HF140-15 PP301AF1.2-105C SF-1100-REC-DT 161 LT4 264 198 102 HF140-20 PP301AF1.6-100 SF-1105-PTS 161 M100 258 225 102 HF140-30 PS3/4F-PN SF-1105-PTSi 161 M112 258 232 102 HF140-40 PV1/2F1/2M-MA SF-1105-REC 161 M114 258 260 250 HF140-50 Q12 SG1000 161 M1214 258 260 250 HF140-60 Q14 SG1001.58C 259 M1218 258 223 250 HM1214 QT14-1-NDC SG1002C 259 M1238 258 258 250 HM1238 RB10012 SG1002 259 M12 258 258 250 HM14316 RB10034 SG1004 259 M1418 258 258 250 HM14 RB112100 SG100 259 M14 258 258 250 HM18 RB112114 SG152 259 M18 258 258 250 HM3814 RB11234 SG15 259 M200 258 258 250 HM516 RB114100 SG1601.58C 259 M3412 258 258 250 HM5838 RB11434 SG1602C 259 M3438 258 263 250 HM58 RB1214B SG1602 193 M34 258 258 250 HP1/4-00xx RB1214 SG160 193 M3814 258 258 250 HP1/4-05xx RB1218 SG2000 193 M3818 258 263 250 HP1/4-15xx RB1238B SG2001.58C 193 M38 258 258 250 HP1/4-25xx RB1238 SG2002C 193 MF1814B 251 263 250 HP1/4-40xx RB1418B SG2002 193 N34 260 258 250 HP1/8-00xx RB200100 SG2004 193 NB1612 227 258 250 HP1/8-05xx RB200112 SG200 193 NB1614 227 258 250 HP1/8-15xx RB200114 SG3000 193 NBC10 227 258 250 HP1/8-25xx RB20034 SG3002C 193 NC1214 260 258 250 HP1/8-40xx RB212200 SG3002 194 NC12N 260 258 250 HPDS5000 RB300200 SG300 194 NC12 260 263 250 HPDSQ20WB RB3412B SG302 194 NC14N 260 258 250 HPPDQ4000 RB3412 SG30 194 NC14 260 258 250 HPWWHVUC RB3414 SG400 194 NC38N 260 258 250 HPWWHV RB3418 SG5000 260 NC38 260 258 250 I34 RB3438 SG600 SG601.58C 250 278 Index Part Number Page Part Number Page Part Number Page Part Number Page SG602C 250 TL08-0001 230 TT200 258 UF300X 253 SG602 250 TL08-0002 230 TT34 258 UF300 252 SG604 250 TL08-0003 230 TUR324B-x.x 191 UFC0100-S 252 SG60 250 TL08-0011 230 TUR324B-x.x-BSP 191 UFC0150-S 252 SHM100 259 TL08-0012 230 TUR324S-x.x 191 UFC0200-S 252 SHM112 259 TL08-0013 230 TUR330B-x.x 191 UFC0300-S 252 SHM114 259 TL08-0014 230 TUR330S-x.x 191 UFG0100E-A 224, 252 SHM1238 259 TL12-0001 230 TVI-8002 178 UFG0150E-A 252 SHM1258 259 TL12-0002 230 TVI-8003 178 UFG0200E-A 252 SHM12B 262 TL12-0003 230 TVI-80005 178 UFG0300E-A 252 SHM12 259 TL12-0006 230 TVI-80015 178 ULD120-025 135 SHM14B 262 TL12-0007 230 TVI-80025 178 ULD120-015 135 SHM14 259 TL12-0011 230 TVI-800075 178 ULD120-08 135 SHM200 259 TL12-0012 230 UAS1/4-00-xx 192 ULD120-06 135 SHM34B 262 TL12-0013 230 UAS1/4-15-xx 192 ULD120-05 135 SHM34 259 TL12-0014 230 UAS1/4-25-xx 192 ULD120-04 135 SHM38B 262 TL16-0001 230 UAS1/4-40-xx 192 ULD120-03 135 SHM38 259 TL16-0002 230 UASPDQ4000 194 ULD120-02 135 SHM58B 262 TL16-0003 230 UASWWHV 194 VGG30160 250 SHM58 259 TL16-0006 230 UASWWHVUC 194 VGG3030 250 SLV10-AA40 99 TL16-0007 230 UF100-FN025P 253 VGG3060 250 SLV10-AA41 99 TL16-0011 230 UF100-FN100 253 VGG30604 250 SLV10-AA48 99 TL16-0012 230 UF100-HB075 253 VGG30 250 SLV10-AB41 99 TL16-0013 230 UF100-HB100 253 VP110-02 151 SLV10-HA01 99 TL16-0014 230 UF100-HB125 253 VP110-03 151 T100 259 TLP-0007 230 UF100-HBT100 253 VP110-04 151 T112 259 TLP-0018 230 UF100-MN075 253 VP110-05 151 T114 259 TLP-0023 230 UF100-MN100 253 VP110-06 151 T1234T 259 TLP-0046 231 UF100-MN125 253 VP110-08 151 T1238T 259 TLP-0050 231 UF100L-HB075 253 VP110-10 151 T1238 259 TR110-01 153 UF100L-HB100 253 VP110-015 151 T1258T 259 TR110-02 153 UF100L-HB125 253 VP110-15 151 T12C 227 TR110-03 153 UF100L 252 VP110-025 151 T12T 259 TR110-04 153 UF100P 253 VP110-035 151 T12 259 TR110-05 153 UF100T 252 VP80-02 151 T1412T 259 TR110-06 153 UF100X 253 VP80-03 151 T1438T 259 TR110-08 153 UF100 252 VP80-04 151 T1438 259 TR110-10 153 UF200-FN200 253 VP80-05 151 T14T 259 TR110-015 153 UF200-HB150 253 VP80-06 151 T14 259 TR110-15 153 UF200-HB200 253 VP80-015 151 T1814T 259 TR80-01 153 UF200-MA200 253 VPT110-035 157 T18 259 TR80-02 153 UF200-MN200 253 VPT110-025 157 T200 259 TR80-03 153 UF200-RC100 253 VPT110-06 157 T34100T 259 TR80-04 153 UF200L-HB150 253 VPT110-05 157 T3412T 259 TR80-05 153 UF200L-HB200 253 VPT110-04 157 T3412 259 TR80-06 153 UF200L 252 VPT110-03 157 T34C 227 TR80-08 153 UF200P 253 VPT110-02 157 T34F 259 TR80-015 153 UF200T 252 VPT80-02 157 T34T 259 TR80-10 153 UF200X 253 VPT80-03 157 T34 259 TR80-15 153 UF200 252 VPT80-04 157 T3812T 101, 259 TS01-100 135, 202 UF300-HB200 253 VPT80-05 157 T3812 259 TS01-50 135, 202 UF300-HB300 253 VPT80-06 157 T3814T 259 TS02-100 145, 202 UF300-MA300 253 VPTCAP 157, 202 T3858 259 TS02-50 137, 145, 202 UF300-MN300 253 W160M 260 T38C 227 TS03-25 202 UF300-RC200 253 W405P 260 T38T 259 TT100 258 UF300L-HB200 253 W406V 260 T38 259 TT112 258 UF300L-HB300 253 WBH100GAS 233 T58 259 TT114 258 UF300L 252 WBH100 233 TL06-0003 229 TT12 258 UF300P 253 WBH112 233 TL06-0004 229 TT14 258 UF300T 252 WBH114/112GAS 233 279 Index Part Number Page Part Number Page Part Number Page Part Number Page WBH114 233 WGG2000C 250 WGGSS100C 251 XT024 189 WBH12/34GAS 233 WGG200C 250 WGGSS3000 251 XT043-GIOKIT 189 WBH12 233 WGG3000C 250 WGGSS400 251 XT043 189 WBH200GAS 233 WGG300C 250 WGGSS400C 251 XT080-GIOKIT 189 WBH200 233 WGG400C 250 WGGSS5000 251 XT080 189 WBH300 233 WGG5000C 250 WGGSS60 251 XT167-GIOKIT 189 WBH34 233 WGG6000C 250 WGGSS600 251 XT167 189 WBH400 233 WGG600C 250 XT010-GIOKIT 189 XT215-GIOKIT 189 WGG1000C 250 WGG60C 250 XT010 189 XT215 189 WGG100C 250 WGGSS100 251 XT020-GIOKIT 189 Y01356040 231 WGG1500C 250 WGGSS1000 251 XT020 189 Y01356061 231 WGG160C 250 WGGSS160 251 XT024-GIOKIT 189 280 Limited Warranty on HYPRO/SHURFLO Agricultural Pumps & Accessories Hypro/SHURflo (hereafter, “Hypro”) agricultural products are warranted to be free of defects in material and workmanship under normal use for the time periods listed below, with proof of purchase. - Pumps: one (1) year from the date of manufacture, or one (1) year of use. This limited warranty will not exceed two (2) years, in any event. - Accessories: ninety (90) days of use. This limited warranty will not apply to products that were improperly installed, misapplied, damaged, altered, or incompatible with fluids or components not manufactured by Hypro. All warranty considerations are governed by Hypro’s written return policy. Hypro’s obligation under this limited warranty policy is limited to the repair or replacement of the product. All returns will be tested per Hypro’s factory criteria. Products found not defective (under the terms of this limited warranty) are subject to charges paid by the returnee for the testing and packaging of “tested good” non-warranty returns. No credit or labor allowances will be given for products returned as defective. Warranty replacement will be shipped on a freight allowed basis. Hypro reserves the right to choose the method of transportation. This limited warranty is in lieu of all other warranties, expressed or implied, and no other person is authorized to give any other warranty or assume obligation or liability on Hypro’s behalf. Hypro shall not be liable for any labor, damage or other expense, nor shall Hypro be liable for any indirect, incidental or consequential damages of any kind incurred by the reason of the use or sale of any defective product. Return Procedures All products must be flushed of any chemical (ref. OSHA section 1910.1200 (d) (e) (f) (g) (h)) and hazardous chemicals must be labeled/tagged before being shipped* to Hypro for service or warranty consideration. Hypro reserves the right to request a Material Safety Data Sheet from the returnee for any pump/product it deems necessary. Hypro reserves the right to “disposition as scrap” products returned which contain unknown fluids. Hypro reserves the right to charge the returnee for any and all costs incurred for chemical testing, and proper disposal of components containing unknown fluids. Hypro requests this in order to protect the environment and personnel from the hazards of handling unknown fluids. Be prepared to give Hypro full details of the problem, including the model number, date of purchase, and from whom you purchased your product. Hypro may request additional information, and may require a sketch to illustrate the problem. Contact the appropriate Hypro Service Department to receive a Return Merchandise Authorization number (RMA#). Returns are to be shipped with the RMA number clearly marked on the outside of the package. Hypro shall not be liable for freight damage incurred during shipping. Please package all returns carefully. All products returned for warranty work should be sent shipping charges prepaid: US/Canada HYPRO / PENTAIR Attention: Service Department 375 Fifth Avenue NW New Brighton, MN 55112 Service: 800-468-3428 Fax: 651-766-6618 Technical: 800-445-8360 [email protected] Europe HYPRO EU Ltd. Station Road Longstanton Cambridge CB24 3DS UK Service/Technical: +44 1954 260097 Fax: +44 1954 260245 [email protected] South America & Central America Pentair Water do Brasil LTDA Av. Marginal Norte da Via Anhanguera, 53.700 Jundiaí/SP - Brasil CEP 13206-245 Tel: (11) 3378-5400 [email protected] All Other Regions HYPRO / PENTAIR Attention: Service Department 375 Fifth Avenue NW New Brighton, MN 55112 Service: 800-468-3428 Fax: 651-766-6618 Technical: 800-445-8360 [email protected] *Carriers, including U.S.P.S., airlines, UPS, ground freight, etc., require specific identification of any hazardous material being shipped. Failure to do so may result in a substantial fine and/or prison term. Check with your shipping company for specific instructions. Hypro LLC, 375 Fifth Avenue NW, New Brighton, MN 55112, USA Tel: 651-766-6300 Fax: 651-766-6600 E-mail: [email protected] Online: www.hypropumps.com Technical: 800-445-8360 Order Department: 800-42-HYPRO (800-424-9776) FAX for fast delivery: 800-323-6496 Europe: Hypro EU LTD. Station Road, Longstanton, Cambridge CB24 3DS, UK Tel: +44 1954 260097 Fax: +44 1954 260245 E-mail: [email protected] Order E-mail: [email protected] Online: www.hypro-eu.co m Central & South America: Pentair Water do Brasil LTDA Av. Marginal Norte da Via Anhanguera, 53.700 Jundiaí/SP - Brasil CEP 13206-245 Tel: (11) 3378-5400 E-mail: [email protected] Form HYP01 (Rev B) 03/16 Printed in USA
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021