Sherwood | CD-980 | Operating instructions | Sherwood CD-980 Operating instructions

Sherwood CD-980 Operating instructions
OPERATING INSTRUCTIONS
NEWCASTLE
COMPACT DISC PLAYER CD-980
PROGRAM
INTRO A.SPACE AUTO
TRACE
POWER
INDEX
A B
EDIT
MIN
SEC
(ON/OFF)
DELETE
1
2
3
4
RANDOM
5
REPEAT
6
ALL 1
A
B
7
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19
8
EDIT
T.SIZE
PEAK SEARCH
RANDOM
9
0
PHONES
20-bit DUAL D.A CONVERTER SYSTEM/DIGITAL SERVO
PHONES LEVEL
(LINE OUT)
REPEAT
ALL/1
A
B
CD-980
Compact Disc Player
NEWCASTLE
TIME
PROG/REV
R
ENGLISH
Unpacking and installation
Congratulations on your purchase!
Your new high fidelity Compact Disc Player is designed to deliver maximum enjoyment and years of trouble free service.
Please take a few moments to read this manual thoroughly. It will explain the features and operation of your System and help
ensure a trouble free installation.
Please unpack your System carefully. We recommend that you save the carton and packing material. They will be helpful if you
ever need to move your unit and may be required if you ever need to return it for service. Your System is designed to be placed
in a horizontal position and it is important to allow at least two inches of space behind your System for adequate ventilation and
cabling convenience.
To avoid early damage, never place the System in direct sunlight, in excessively humid or dusty locations, in very low or high
temperature (below 40°F ; 5°C or over 100°F ; 40°C) or near sources of strong magnetic fields. Connect your complementary
components as illustrated in the following section.
This symbol is intended to alert the user to
the presence of uninsulated "dangerous
voltage" within the product's enclosure that
may be of sufficient magnitude to constitute
a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
WARNING
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION
CLASS 1
LASER PRODUCT
Invisible laser radiation when the unit is open. Do
not stare into beam.
CAUTION:USE OF ANY CONTROLS, ADJUSTMENTS,OR
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
2
Read this Before Operating Your Unit
FOR YOUR SAFETY
FOR YOUR SAFETY
Units shipped to the U.S.A. and Canada are designed for
operation on 120 V AC only.
Units shipped to Australia are designed for operation on
240 V AC only.
To ensure safe operation the three-pin plug supplied
must be inserted only into a standard three-pin power
point which is effectively earthed through the normal
household wiring. Extension cords used with the
equipment must be three-core and be correctly wired to
provide connection to earth.
Improper extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily does
not imply that the power point is earthed and that the
installation is completely safe. For your safety, if in any
doubt about the effective earthing of the power point,
consult a qualified electrician.
PAN-EUROPEAN UNIFIED VOLTAGE
All units are suitable for use on supplies 230-240 V AC.
Safety precaution with use of a polarized AC plug.
However, some products may be supplied with a
nonpolarized plug.
CAUTION : To prevent electric shock, match wide blade
of plug to wide slot, fully insert.
ATTENTION : Pour eviter les choc electriques, introduire
la lame la plus large de la borne correspondante de la
prise et poussre jusqu'au fond.
FOR U.S.A.
FCC INFORMATION
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio TV technician for
help.
CAUTION: Any changes or modifications in construction of this
device which are not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
FOR OTHER COUNTRIES ................... 110 V/220 V
FOR YOUR SAFETY
Units shipped to countries other than the above
countries are equipped with an AC voltage selector
switch on the rear panel. Refer to the following
paragraph for the proper setting of this switch.
AC VOLTAGE SELECTION
This unit operates on 110-220 V AC. The AC voltage
selector switch on the rear panel is set to the voltage
that prevails in the area to which the unit is shipped.
Before connecting the power cord to your AC outlet,
make sure that the setting position of this switch
matches your line voltage. If not, it must be set to your
voltage in accordance with the following direction.
AC voltage selector switch
AC 110 V
AC 220 V
Move switch lever to match your line voltage with a small
screwdriver or other pointed tool.
3
ENGLISH
FOR AUSTRALIA AND EUROPE ............ 230 V/240 V
FOR U.S.A. AND CANADA ............................... 120 V
Rear Panel Connections
ENGLISH
·Do not plug the AC input cord into the AC outlet when making connections.
·Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections.
■ OUTPUT
CD input in Amplifier
or Receiver
Power Amplifier
■ AC INPUT CORD
When reducing signal path by connecting power amplifier to
variable output of this unit directly, you can listen to high
quality music.
It is possible to control volume with Headphone Level
Control Knob.
In general, fixed output is connected to CD input in amplifier
or receiver.
Dolby noise reduction and HX Pro headroom
extension manufactured under license from Dolby
Laboratories Licensing Corporation. HX Pro
originated by Bang & Olufsen. "Dolby", the
double-D symbol and "HX PRO" are trademarks
of Dolby Labor atories Licensing Corporation.
Plug this cord into a wall AC
outlet.
"SHOCK HAZARD-DO NOT OPEN"
"RISQUE DE CHOC-ELECTRIQUE-NE PAS OUVRIR"
NEWCASTLE
MODEL NO. CD-980
CAUTION
COMPACT DISC PLAYER
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AC INPUT
120V~60Hz
13W
MADE IN KOREA
DESIGNED IN USA
E85649
T h i s d e v i c ec o m p l i e s w i t h P a r t 1 5 o f t h e F C C R u l e s .
Operation is subject to the following two conditions:
( 1 ) T h i s d e v i c e m a y n o tc a u s e h a r m f u l i n t e r f e r e n c e , a n d
29Z3
LISTED
AUDIO EQUIPMENT
R
OPTICAL
COAXIAL
DIGITAL OUTPUT
C
R
(2)this device must accept any interference received,
i n c l u d i n g i n t e r f e r e n c e t h a t m a y c a u s eu n d e s i r e d o p e r a t i o n .
SER. NO.
■ DIGI LINK
■ DIGITAL OUTPUT
OPTICAL
COAXIAL
DIGITAL OUTPUT
Amplifier or Receiver by
SHERWOOD
COAXIAL Digital Input in
Amplifier or Receiver
OPTICAL Digital Input in
Amplifier or Receiver
Connect this jack to the DIGI LINK jack of
Sherwood amplifier or receiver bearing the
DIGI LINK III or II mark to control this unit
remotely by DIGI LINK system.
Digital output should be connected to digital
input of amplifier or receiver to enjoy live
digital sound.
You can record digital sound by connecting
digital input of Mini Disc Recorder to these
jacks.
When making the COAXIAL DIGITAL
connection. be sure to use 75Ω COAXIAL
cord. not a conventional AUDIO cord.
When making OPTICAL DIGITAL
connection, do it after removing tap.
Insert tap when not using the OPTICAL
DIGITAL jack.
4
POWER BUTTON
DISC TRAY
ENGLISH
Front Panel Controls
TAPE SIZE BUTTON
EDIT BUTTON
TIME BUTTON
REMOTE SENSOR
OPEN/CLOSE BUTTON
FLUORESCENT DISPLAY
NEWCASTLE
COMPACT DISC PLAYER CD-980
PROGRAM
INTRO
A.SPACE AUTO
TRACE
POWER
INDEX
A B
EDIT
MIN
SEC
(ON/OFF)
DELETE
1
20-bit DUAL D.A
2
3
4
RANDOM
5
REPEAT
6
ALL 1
B
A
7
1
6
11
16
2
7
12
17
8
3
8
13
18
4 5
9 10
14 15
19
TIME
EDIT
T.SIZE
PROG/REV
PEAK SEARCH
RANDOM
R
9
0
PHONES
CONVERTER SYSTEM/DIGITAL SERVO
PLAY/PAUSE BUTTON
STOP BUTTON
BACKWARD SEARCH/SKIP BUTTON
FORWARD SEARCH/SKIP BUTTON
ALL/1 REPEAT BUTTON
PASSAGE REPEAT BUTTON
NUMERIC BUTTONS
PROGRAM/REVIEW BUTTON
HEADPHONE JACK
PEAK SEARCH BUTTON
(HEADPHONE) LEVEL CONTROL KNOB
RANDOM BUTTON
5
PHONES LEVEL
(LINE OUT)
REPEAT
ALL/1
A
B
ENGLISH
FLUORESCENT DISPLAY
AUTO SPACE
INDICATOR
INTROSCAN
PLAY
INDICATOR
PROGRAM
INDICATOR
AUTO INDICATOR
EDIT
INDICATOR
PROGRAM
INTRO
A.SPACE
AUTO
TRACK
MIN
INDEX
PLAY(
A
EDIT
B
SEC
)/PAUSE( )
INDICATOR
DELETE
RANDOM
REPEAT
ALL
DELETE
INDICATOR
RANDOM
PLAY
INDICATOR
1
A
B
1
2
3
4
5
6
7
8
9
10
11
12
13 14 15
16
17
18 19
PASSAGE REPEAT INDICATOR
ALL/1 REPEAT INDICATOR
REPEAT PLAY
INDICATOR
6
MUSIC
CALENDAR
ENGLISH
REMOTE CONTROL UNIT
DISPLAY
DISPLAY BUTTON
1
2
3
4
5
7
8
9
0
NUMERIC BUTTONS
6
SKIP
BACKWARD SKIP BUTTON
FORWARD SKIP BUTTON
BACKWARD SEARCH BUTTON
FORWARD SEARCH BUTTON
EDIT BUTTON
TAPE SIZE BUTTON
PEAK SEARCH BUTTON
TIME BUTTON
ALL/1 REPEAT BUTTON
PASSAGE REPEAT BUTTON
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
STOP BUTTON
PAUSE BUTTON
PLAY BUTTON
INDEX BUTTON
PROGRAM/REVIEW BUTTON
DELETE/REVIEW BUTTON
RANDOM BUTTON
INTROSCAN BUTTON
VOLUME
+
SPEED DOWN BUTTON
NORMAL SPEED BUTTON
SPEED UP BUTTON
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
Note: The NORMAL SPEED BUTTON is not used for this unit.
7
(HEADPHONE) VOLUME
DOWN/UP BUTTON
ENGLISH
REMOTE CONTROL OPERATION RANGE
NEWCASTLE
COMPACT DISC PLAYER CD-980
PROGRAM
INTRO A.SPACE AUTO
TRACE
POWER
INDEX
A B
EDIT
MIN
SEC
(ON/OFF)
DELETE
1
20-bit DUAL D.A
2
3
4
RANDOM
5
REPEAT
6
ALL 1
A
B
7
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19
8
TIME
EDIT
T.SIZE
PROG/REV
PEAK SEARCH
RANDOM
R
9
0
PHONES
CONVERTER SYSTEM/DIGITAL SERVO
PHONES LEVEL
(LINE OUT)
REPEAT
ALL/1
A
B
7m
30
30
DISPLAY
1
6
2
3
4
7
8
9
5
Use the remote control unit within a range of
about 7 meters (23 feet) and angles of up to 30
degrees aiming of the remote sensor.
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
LOADING BATTERIES
1. Remove the cover.
2. Load two size “AAA” matching the polarity.
Remove the batteries when they are not used for a
long time.
Do not use the rechargeable batteries (Ni-Cd type).
8
Before Operation
NEWCASTLE
COMPACT DISC PLAYER CD-980
PROGRAM
INTRO
A.SPACE AUTO
TRACE
POWER
INDEX
A B
EDIT
MIN
SEC
(ON/OFF)
DELETE
1
In handling a disc, hold it carefully with edges.
2
3
4
RANDOM
5
REPEAT
6
ALL 1
A
B
7
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19
8
DIGITAL SERVO
20BIT D.A CONVERTER SYSTEM
TIME
EDIT
T.SIZE
PROG/REV
PEAK SEARCH
RANDOM
R
9
0
PHONES
PHONES LEVEL
(LINE OUT)
REPEAT
ALL/1
Do not stick paper or write anything on the printed
surface.
ENGLISH
Do not expose discs to direct sunlight, high
humidity or high temperature for a long time.
When loading or unloading a disc in the disc
tray, always place it with the printed side up.
Only compact discs bearing this mark can be
reproduced.
A
B
The DTS logo on the front means that the CD encoded
with the DTS signal can be heard in DTS mode when
this digital out is connected to the digital input of the
amplifier with the DTS decoder, etc.
Fingermarks and dust on the recorded surface should be
carefully wiped off with a soft cloth. Wipe straight
from the inside to the outside of the disc.
“DTS” and DTS Digital Surround are trademarks of
Digital Theater Systems, Inc.
Always keep the discs in their cases after use to protect
them from dust and scratches.
9
ENGLISH
PLAYING A DISC
1
Load a disc.
2
To start play.
DISPLAY
1
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
or
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
TRACK
1
2
3
4
5
6
7
8
9
10
-
VOLUME
NORM
+
-
MIN
SEC
NEWCASTLE
-
11
12
13 14 15
16
17
18 19
REMOTE CONTROL UNIT RM-CD80
-
Stop mode
3
To interrupt play temporarily.
4
To stop play.
DISPLAY
1
6
2
3
4
7
8
9
5
0
DISPLAY
SKIP
SEARCH
INDEX
1
2
3
4
7
8
9
5
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
6
SEARCH
or
REPEAT
ALL/1 A<->B RANDOM INTRO
TIME
SEARCH
INDEX
-
PITCH
-
0
SKIP
-
-
NORM
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
VOLUME
SEARCH
-
+
or
-
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
-
PITCH
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
-
-
NORM
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
Press again to restart play.
SEARCH AND SKIP PLAY
-
-
-
-
-
-
-
-
-
-
-
-
Searching for a passage during play
Selecting a track during play
Press and hold down the button until the desired
passage is reached.
Press the button momentarily and repeatedly until
the desired track is selected.
DISPLAY
1
6
DISPLAY
2
3
4
7
8
9
5
0
SKIP
1
6
2
3
4
7
8
9
SKIP
5
0
SEARCH
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
SKIP
SEARCH
or
SEARCH
or
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
TIME
SEARCH
TIME
NORM
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
INDEX
-
NORM
VOLUME
+
VOLUME
-
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
You can select the desired track directly using the
numeric buttons on the remote control unit or on
the front panel.
10
ENGLISH
PLAYING A DISC IN RANDOM SEQUENCE
DISPLAY
RANDOM
1
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
RANDOM
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
or
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
The unit automatically selects and plays tracks
on the current disc in random sequence.
Press again to cancel random play.
VOLUME
+
-
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
-
PLAYING THE FIRST 10 SECONDS OF EACH TRACK
Introscan play
DISPLAY
1
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
REPEAT
ALL/1 A<->B RANDOM INTRO
TIME
NORM
The unit plays the first 10 seconds of each track.
Press again to cancel the introscan play.
INTRO
PITCH
-
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
-
PLAYING THE DESIRED INDEX
This function is available only on the CD in which tracks are divided into INDEXes.
DISPLAY
1
-6
2
3
4
5
7
8
9
0
-
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
INDEX
When playing the track you want, select the
desired INDEX.
If you select the INDEX higher than the contained
one, the unit will play the first INDEX.
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
11
ENGLISH
REPEATING PLAY
Repeating a disc during play
If this button is pressed once, all tracks are played repeatedly.
DISPLAY
REPEAT
1
A
ALL/1
B
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
Each time this button is pressed, the repeat mode
changes as follows;
SEARCH
or
REPEAT
ALL/1 A<->B RANDOM INTRO
TIME
REPEAT
ALL/1 A<->B
PITCH
-
VOLUME
NORM
+
NEWCASTLE
→ REPEAT ALL → REPEAT 1 → OFF
REMOTE CONTROL UNIT RM-CD80
Repeating a single track during play
If this button is pressed once more, current track is played repeatedly.
-
DISPLAY
REPEAT
1
A
ALL/1
B
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
or
REPEAT
ALL/1 A<->B RANDOM INTRO
TIME
REPEAT
ALL/1 A<->B
PITCH
-
VOLUME
NORM
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
Press again to cancel the repeat play.
Repeating a specific passage during play
-
At the beginning of the desired passage,
press this button.
-
1
2
At the end of the desired passage, press
again, then the desired passage is played
repeatedly.
Press again to cancel the repeat play.
DISPLAY
REPEAT
1
ALL/1
A
B
2
7
6
3
4
8
9
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
or
TIME
REPEAT
ALL/1 A<->B
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
12
ENGLISH
PLAYING TRACKS IN ANY SEQUENCE
·Up to 20 selections can be programmed to play in any desired sequence.
Programming the tracks on a CD
1
In the stop mode.
PROGRAM
TRACK
MIN
DISPLAY
SEC
PROG/REV
1
2
3
4
5
6
7
8
9
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
TIME
-
REPEAT
ALL/1 A<->B RANDOM INTRO
PROG/REV.
or
PITCH
-
NORM
VOLUME
-
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
2
Select the desired track.
Example: When selection track 4.
or
DISPLAY
1
6
-
2
3
4
5
7
8
9
0
PROGRAM
4
TRACK
SKIP
SEARCH
SKIP
4
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
or
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
-
-
PITCH
-
NORM
VOLUME
+
You can select the desired track directly using the
NUMERIC buttons in the front panel.
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
3
Store the selected track in the memory.
PROGRAM
PROGRAM
4
TRACK
4
TRACK
MIN
SEC
DISPLAY
1
PROG/REV
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
TIME
or
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
PROG/REV.
VOLUME
+
When selecting a track with the NUMERIC buttons,
the selected track is stored automatically without the
PROGRAM/REVIEW button.
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
-
-
4
Repeat steps 2 and 3 until the desired
program is completed.
5
Start play.
DISPLAY
1
2
3
4
7
8
9
5
-
6
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
or
SEARCH
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
13
ENGLISH
Checking the programmed selections
DISPLAY
PROG/REV
1
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
Each time the PROGRAM/REVIEW button is
pressed in the stop mode, the programmed
selections will appear in the programmed sequence.
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
REPEAT
ALL/1 A<->B RANDOM INTRO
TIME
or
PITCH
-
PROG/REV.
VOLUME
NORM
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
Rectifying any wrong programmed selection
DISPLAY
PROG/REV
1
1
Find track 9.
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
REPEAT
TIME ALL/1 A<->B RANDOM INTRO
or
-
PROG/REV.
+
PITCH
VOLUME
NORM
NEWCASTLE
Example: When track 5, 9 and 7 are programmed, and
you want to replace track 9 with track 10.
REMOTE CONTROL UNIT RM-CD80
-
2
Select track 10.
3
-
1
2
3
4
5
6
7
8
9
0
PROG/REV
1
INDEX
1
SEARCH
or
DISPLAY
within 2 seconds
SKIP
SEARCH
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
TIME
-
or
DISPLAY
-
SKIP
Store the desired track in the memory.
0
6
2
3
4
7
8
9
5
-
0
SKIP
REPEAT
ALL/1 A<->B RANDOM INTRO
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
PITCH
-
VOLUME
NORM
TIME
+
or
REPEAT
ALL/1 A<->B RANDOM INTRO
PROG/REV.
-
PITCH
-
VOLUME
NORM
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
You can select the desired track directly using the
NUMERIC buttons in the front panel.
-
-
-
■To clear all programmed selections.
Press this button for more than 4 seconds.
Clearing the programmed selections
■To clear one by one
Each time this button is pressed, the programmed
selections are cleared one by one in the opposite
sequence.
-
-
-
-
DISPLAY
1
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
INDEX
DISPLAY
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
1
6
2
3
4
5
7
8
9
0
or
SKIP
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
SEARCH
INDEX
-
NORM
VOLUME
+
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
or
TIME
-
REPEAT
ALL/1 A<->B RANDOM INTRO
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
PITCH
-
NORM
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
-
Or press OPEN/CLOSE button(▲).
-
-
■To clear a specific selection.
Find the desired selection and clear it.
-
DISPLAY
DISPLAY
PROG/REV
1
2
3
4
5
1
6
7
8
9
0
6
2
3
4
7
8
9
SEARCH
INDEX
SEARCH
SEARCH
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
or
5
0
SKIP
SKIP
SEARCH
PROG/REV.
or
-
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
VOLUME
-
+
NORM
VOLUME
+
-
-
NEWCASTLE
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
REMOTE CONTROL UNIT RM-CD80
14
-
ENGLISH
DELETING UNDESIRED TRACKS
When there are undesired tracks, you can delete.
Up to 20 tracks can be deleted.
-
To delete
In the stop mode.
1
DISPLAY
1
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
DEL/REV.
VOLUME
NORM
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
-
1
TRACK
MIN
SEC
-
DELETE
Select undesired tracks.
Example: When deleting the 3rd track.
2
3
2
3
4
5
9
10
6
7
8
11
12
13 14 15
16
17
18 19
Delete the selected track.
-
DISPLAY
1
2
3
4
7
8
9
5
DISPLAY
6
0
SKIP
SKIP
SEARCH
3
INDEX
1
6
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
2
3
4
7
8
9
5
0
SKIP
SEARCH
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
or
PITCH
-
VOLUME
NORM
TIME
+
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
DEL/REV.
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
1
TRACK
DELETE
3
4
5
6
7
8
9
10
11
12
2
13 14 15
16
17
18 19
TRACK
You can select the desired track directly using the
NUMERIC buttons in the front panel.
When selecting a track with the NUMERIC buttons,
the selected track is stored automatically without the
PROGRAM/REVIEW button.
-
TRACK
-
15
MIN
SEC
1
2
6
7
8
4
5
9
10
11
12
13 14 15
16
17
18 19
1
2
6
7
8
11
12
13 14 15
16
17
18 19
4
5
9
10
ENGLISH
4
Repeat the step 2 and 3 to delete the
undesired tracks.
Start play.
5
DISPLAY
1
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
or
SEARCH
REPEAT
ALL/1 A<->B RANDOM INTRO
TIME
PITCH
-
VOLUME
NORM
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
-
Checking the deleted selections
DISPLAY
-
Each time the DELETE/REVIEW button is pressed,
the deleted selections will appear in the deleted
sequence.
1
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
REPEAT
ALL/1 A<->B RANDOM INTRO
TIME
DEL/REV.
-
PITCH
-
NORM
VOLUME
+
-
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
-
Recovering the deleted selections
■When recovering all deleted tracks.
Press and hold down this button for more than 4
seconds.
-
■When recovering one by one.
Each time this button is pressed in the delete mode,
the deleted selections are recovered one by one in
the opposite sequence.
-
DISPLAY
1
6
2
3
4
7
8
9
2
3
4
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
or
DISPLAY
1
SEARCH
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
5
PITCH
7
6
8
5
0
SKIP
SEARCH
9
-
0
NORM
VOLUME
+
SKIP
SEARCH
INDEX
NEWCASTLE
or
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
REMOTE CONTROL UNIT RM-CD80
SEARCH
REPEAT
ALL/1 A<->B RANDOM INTRO
TIME
PITCH
-
NORM
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
Or press OPEN/CLOSE button.
-
-
-
-
■When recovering a specific selection.
Find the desired selection and recover it.
-
-
DISPLAY
DISPLAY
1
2
3
4
5
6
7
8
9
0
1
2
3
4
7
8
9
5
-
-
6
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
or
SEARCH
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
0
SKIP
SKIP
SEARCH
NORM
DEL/REV.
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
VOLUME
-
+
NEWCASTLE
NORM
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
REMOTE CONTROL UNIT RM-CD80
16
ENGLISH
EDITING FOR RECORDING
Up to 20 tracks for auto and manual edit can be edited according to the tape length.
Making auto edit
In the stop mode, select the auto edit mode.
1
A.SPACE
AUTO
EDIT
3
4
5
6
7
8
9
10
11
1
12
2
13 14 15
16
17
18 19
DISPLAY
EDIT
1
2
3
4
5
6
7
8
9
0
SKIP
or
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
EDIT
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
VOLUME
NORM
+
Each time this button is pressed, the edit mode
changes as follows;
→ AUTO EDIT → MANUAL EDIT → OFF
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
-
2
Select the desired tape length.
Example: When the tape length is 46
minutes.
T.SIZE
A.SPACE
AUTO
EDIT
or
A.SPACE
DISPLAY
1
2
3
4
5
6
7
8
9
0
AUTO
3
4
5
7
8
9
10
11
12
13 14 15
16
17
18 19
EDIT
MIN
SKIP
SEARCH
2
6
SEC
2
3
4
5
6
7
8
9
10
11
12
13 14 15
16
17
18 19
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
-
SEARCH
T.SIZE
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
VOLUME
+
Each time this button is pressed, the tape length
changes as follows;
→ C-46 → C-54 → C-60 → C-74 → C-90 → C-120
-
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
Edit the tracks to be recorded.
3
A.SPACE
PROGRAM
AUTO
EDIT
A
B
1
2
3
4
5
TRACK
The edited tracks on the
side A.
DISPLAY
1
EDIT
6
2
3
4
7
8
9
5
-
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
A.SPACE
PROGRAM
-
AUTO
EDIT
A
B
SEARCH
or
EDIT
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
VOLUME
TRACK
MIN
SEC
6
7
8
9
The edited tracks on the
side B.
-
+
17
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
A.SPACE
PROGRAM
TRACK
AUTO
EDIT
MIN
A
B
SEC
1
2
3
4
6
7
8
9
17
17
5
The auto edit is
completed.
ENGLISH
-
Making manual edit
In the stop mode, select the manual edit
mode.
1
Select the tape length.
2
DISPLAY
DISPLAY
1
EDIT
2
3
4
7
8
9
T.SIZE
5
1
6
6
0
2
3
4
7
8
9
5
0
SKIP
SKIP
SEARCH
SEARCH
INDEX
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
T.SIZE
SEARCH
EDIT
-
TIME
or
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
or
VOLUME
NORM
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
VOLUME
+
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
A.SPACE
EDIT
1
2
3
4
5
6
7
8
9
10
A.SPACE
1
SEC
3
4
5
6
7
8
9
10
12
13 14 15
17
18 19
11
12
13 14 15
11
16
17
18 19
16
Press the PROGRAM/REVIEW button to
manually edit the tracks to be recorded.
3
EDIT
MIN
4
2
Edit the tracks for the side A repeating
steps 2 and 3 of programming procedure on
page 13.
DISPLAY
PROG/REV
1
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
or
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
PROG/REV.
·During manual edit, if the “-” indicator in the time
display disappears and arrow mark blinks, it means
that the total time of the edited tracks exceeds the
tape length.
-
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
A.SPACE
PROGRAM
EDIT
A
B
1
2
3
4
5
6
7
8
9
10
11
12
13 14 15
16
17
18 19
-
Press the EDIT button to start editing for
the side B.
5
6
DISPLAY
1
EDIT
6
2
3
4
7
8
9
Edit the tracks for the side B in the same
manner.
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
EDIT
TIME
or
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
A.SPACE
PROGRAM
EDIT
A
B
TRACK
18
ENGLISH
Checking the edited tracks
Check as you do the programmed tracks.
DISPLAY
PROG/REV
1
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
or
REPEAT
ALL/1 A<->B RANDOM INTRO
TIME
PITCH
-
PROG/REV.
VOLUME
NORM
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
-
Clearing all edited tracks
Press the STOP/CLEAR button for more than 4 seconds or open the tray.
-
DISPLAY
1
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
or
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
or
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
In the manual edit mode, you can clear or rectify the tracks like programming.
SEARCHING FOR A PEAK LEVEL
·In the stop mode.
DISPLAY
1
PEAK SEARCH
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
or
INDEX
It will play the peak level passage repeatedly for 5
seconds.
Press “ ” button to cancel.
If you do this again and again, the peak level
passage may be changeable on the same CD.
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
PEAK
SEARCH
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
19
ENGLISH
SETTING A DESIRED PITCH CONTROL
When connecting amp or receiver to digital output
and using “PITCH CONTROL” function, noise or
abnormal sound can be heard.
In this case, don’t use “PITCH CONTROL”
function.
Each time PITCH + or - button is pressed, +13,
-18 speeds are selected step by step.
NORMAL SPEED BUTTON does not operate.
DISPLAY
1
6
2
3
4
7
8
9
5
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
TIME
REPEAT
ALl/1 A<->B RANDOM INTRO
PITCH
-
NORM
VOLUME
+
PITCH
+
-
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
-
SELECTING A BRIGHTNESS OF THE DISPLAY
-
Each time this button is pressed, the brightness of
the display changes as follows;
DISPLAY
DISPLAY
1
2
3
4
5
6
7
8
9
0
SKIP
SEARCH
INDEX
→ ON → DIM → OFF
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
TIME
REPEAT
ALl/1 A<->B RANDOM INTRO
PITCH
-
NORM
VOLUME
+
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
-
SELECTING A TIME DISPLAY
Each time this button is pressed during play, time display changes as follows;
TRACK
MIN
SEC
7
8
9
Elapsed playing time of
the current track.
TIME
DISPLAY
-
1
TIME
or
6
2
3
4
5
7
8
9
0
SKIP
SEARCH
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
PITCH
-
NORM
TRACK
MIN
SEC
7
8
9
MIN
SEC
7
8
9
VOLUME
+
Remaining playing time of
the current track.
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
During random play, the remaining playing time of the disc shows “--:--”.
20
Remaining playing time of
the disc.
ENGLISH
1
ENGLISH
USING THE HEADPHONES
For private listening, insert a 1/4 inch plug
of the headphone into the PHONES jack.
PHONES
2
Adjust the PHONES LEVEL.
DISPLAY
1
6
2
3
4
7
8
9
5
0
SKIP
PHONES LEVEL
SEARCH
(LINE OUT)
INDEX
EDIT T.SIZE PEAK PROG/REV. DEL/REV.
SEARCH
TIME
REPEAT
ALL/1 A<->B RANDOM INTRO
-
or
PITCH
-
NORM
VOLUME
+
VOLUME
When connecting this unit to power amp directly
using variable output, you can control the volume
with this.
NEWCASTLE
REMOTE CONTROL UNIT RM-CD80
21
ENGLISH
Troubleshooting Guide
If your unit should not perform as expected, consult the table below to see if the problem can be corrected
before seeking help from your dealer or our service organization.
PROBLEM
No power
REMEDY
POSSIBLE CAUSE
The AC input cord is disconnected.
Connect the cord securely.
The POWER button is not pressed
Press the POWER button to ON.
correctly.
No play
The disc is loaded upside down.
Reload the disc with the printed side
up.
No sound
Dirty disc.
Clean the disc.
Defective or deeply scratched disc.
Load another disc.
Incorrect connections.
Make connections correctly.
Incorrect operation of the amplifier.
Operate the amplifier correctly.
The "■■" indicator lights up.
Press the ▶/■■ button to cancel the
pause mode.
Poor or distorted sound
The unit is connected to the PHONO
Make connections correctly.
input jacks of the amplifier.
Check the connections and connect
Poor connections.
all cords securely.
Sound skips
Defective or deeply scratched disc.
Play another disc.
This unit is placed on a surface that
Place this unit on a stable surface.
is subject to vibration or physical
shock.
Programming or deleting
The disc is dirty or badly scratched.
Try again with a scratch-free disc.
does not perform.
The programming or deleting
Try again.
procedure is not correct.
The number of the programmed or
Check the number of the
deleted selections is 20.
programmed deleted selections.
22
Specifications
TYPICAL AUDIO PERFORMANCES
Number of Channels ........................................................................................................................................... 2
Frequency Range................................................................................................................. 20-20,000 Hz 0.5 dB
Signal To Noise Ratio (A Wtd.) .............................................................................................. More than 110 dB
Dynamic Range ......................................................................................................................... More than 93 dB
Total Harmonic Distortion........................................................................................ Less than 0.001 % at 1 kHz
Wow and Flutter ............................................................................................................. Quartz crystal precision
Audio Output Level ............................................................................................................................... 2 V RMS
Digital Output
Coaxial....................................................................................................................................... 0.5 Vp-p/75 Ω
Optical (Wavelength 660 nm) ................................................................................................... -15 ~ -20 dBm
OPTICAL READOUT SYSTEM
LASER............................................................................................................................ Semiconductor AlGaAs
Wavelength........................................................................................................................................ 760-800 nm
Numerical Aperture ....................................................................................................................................... 0.45
SIGNAL FORMAT
Sampling Frequency............................................................................................................................... 44.1 kHz
D/A Conversion ...................................................................................................... Twin 20 bit D/A Conversion
Oversampling ............................................................................................................................................ 8 times
GENERAL
Power Requirement
U.S.A and Canada........................................................................................................................ 120 V, 60 Hz
Power Consumption ..................................................................................................................................... 13 W
Dimension (W×H×D)......................................................................................................... 440×95×245 mm
.......................................................................................................(17-5/16×3-3/4×9-5/8 inches)
Weight(NET) .............................................................................................................................. 5.5 kg (12.1 lbs)
Note: Specifications and design subject to change without notice for improvements.
23
ENGLISH
SYSTEM .......................................................................................................... Compact Disc Digital Audio
5707-04694-005-0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising