Catalogue Sheet: EX10 Series

Catalogue Sheet: EX10 Series
Project/Location:
Contractor:
EX10 Series
Date:
Prepared by:
All Metal Exit Sign
Features
Typical specifications
• Two-wire universal AC input
Supply and install the Emergi-Lite® EX10 Series Exit Signs. The
equipment shall operate with universal 2-wire AC input voltage
of 120 to 347VAC at less than 1.5W and universal 2-wire DC input
voltage from 6 to 24VDC at less than 1.5W for single and double face
signs. The sign shall be suitable for wall, end, or ceiling mount. The
faceplates shall be constructed of steel and shall come standard
with knockout chevrons. The frame shall be of one-piece steel
construction.
• Pre-assembled for quick, easy installation
• Universal mounting – end, wall or ceiling
• Supplied with two stencil plates, red diffusing lenses and
backplate
• Easy access to wiring entry for all mounting options
• Canopy mounting system designed specifically for ease of
installation
The light source shall be light-emitting diodes (LED). The LED lamps
shall provide illumination in normal and emergency operation and
shall be mounted inside the exit housing, not on the face. Red LEDs
shall be of ALINGAP technology.
• Universal, field-selectable chevrons (knockout)
• Energy efficient – consumes less than 3W in AC or DC mode
• Normal AC and emergency DC operation – 120 to 347V AC input;
6 to 24V DC input
An LED-sensitive diffuser shall be mounted behind the legend to
provide the 6” high by 3/4” stroke letters with even illumination.
• Long life energy-efficient ALINGAP technology LED light source
• Also available with power pack; see EX10-P catalogue sheet
The Exit Sign in a Self-Powered configuration shall stay illuminated
during emergency operation for at least 90 minutes upon AC failure.
• CSA certified, meets or exceeds CSA 22.2 No. 141. requirements
The Exit Sign shall be CSA-C860 approved and meets CSA 22.2 No.141.
The equipment shall be Emergi-Lite® Model:
POwer consumption
Dimensions
Dimensions are approximate and subject to change.
Model
AC Specs
73/8” [18.7 cm]
75/8” [19.2 cm]
87/8” [22.4 cm]
45/8” [11.7 cm]
121/8” [30.7 cm]
21/8” [5.3 cm]
133/8” [33.9 cm]
Wire guards
460.0079-E
DC Specs
AC-only, red
120 to 347VAC
Less than
1.5W
AC/DC
standard, red
120 to 347VAC
Less than
1.5W
6 to 24VDC
Less than
1.5W
AC/special DC,
Less than
120/277/ 347VAC
red
3W
36 or 48 or
120VDC
Less than
2.5W
-
-
Self-Powered
red
120 to 347VAC
Less than Nickel-Cadmium
3W
battery
AC-only, green
120 to 347VAC
Less than
1.5W
-
-
AC/DC
standard, green
120 to 347VAC
Less than
1.5W
6 to 24VDC
Less than
2.5W
Self-Powered
green
120 to 347VAC
Less than Nickel-Cadmium
3W
battery
Min. 60
minutes
Min. 90
minutes
Wall Mount
460.0027-E
End Mount
460.0028-E
Ceiling Mount
ordering information
Series
EX10= LED EXIT sign / Universal
mount
Colour
power source and voltage
options
W= factory white
B= black
TA= textured aluminum
-U= u
niversal voltage 120 to 347VAC
6 to 24VDC
-U00= 120 to 347Vac, no DC**
-U36= 120/277/347Vac - 36Vdc*
-U48= 120/277/347Vac, 48Vdc*
-U120= 120/347Vac, 120Vdc*
-EM120-2W= 120Vac, 120Vdc 2 wires*
-I= Self-Powered 120 to 347Vac
-TP= tamper-proof screws
-VRTP= v andal resistant shield with tamper-proof
screws**
-G= green legend
990.0119-E= tamper-proof bit*
Other colours available,
please contact your sales
representative.
*For green legend, consult your sales representative.
** Supply as single face
*One bit per order.
EXAMPLE: EX10W-U
45
**Indicate single or double face
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement