Datalogic | QuickScan Lite QW2100 | Technical data | Datalogic QuickScan Lite QW2100 Technical data

Datalogic QuickScan Lite QW2100 Technical data
QuickScanTM Lite QW2100
General Purpose Corded
Handheld Linear Imager Bar Code Reader
Quick Reference Guide
Datalogic ADC, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted
in any form or by any means without prior written permission of Datalogic ADC, Inc.
or its subsidiaries or affiliates ("Datalogic" or "Datalogic ADC"). Owners of Datalogic
products are hereby granted a non-exclusive, revocable license to reproduce and
transmit this documentation for the purchaser's own internal business purposes.
Purchaser shall not remove or alter any proprietary notices, including copyright
notices, contained in this documentation and shall ensure that all notices appear
on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either
be downloadable from the Datalogic website (www.datalogic.com) or provided on
appropriate media. If you visit our website and would like to make comments or
suggestions about this or other Datalogic publications, please let us know via the
"Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual
that is complete and accurate, however, Datalogic reserves the right to change any
specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in
many countries, including the U.S.A. and the E.U. All other brand and product
names may be trademarks of their respective owners.
QuickScan is a registered trademark of Datalogic ADC, Inc. in many countries,
including the U.S.A. and the E.U. Autosense is a registered trademark of Datalogic
ADC, Inc. in the U.S.
This product may be covered by one or more of the following patents:
Design Patents: CN ZL201230049587.7; EP1987843; USD677258.
Utility Patents: EP0789315B1; EP1128315B1; EP1396811B1; EP1413971B1; US5481098; US5992740;
US6098883; US6454168; US6561427; US6758403; US6808114; US6997385; US7387246; US7506816.
Additional patents pending
Datalogic ADC, Inc.
QUICKSCAN
TM
PRODUCT SERIES END USER LICENSE AGREEMENT
Notice to End User: The Datalogic Product you have acquired contains embedded Software,
which is integral to the product's operation. This Software is being provided to you under license, subject to the terms and conditions of this Agreement. If you use the Datalogic Product, you will be deemed to have accepted the terms and conditions of this Agreement. If you
do not intend to be bound to the terms of this Agreement, Datalogic is not willing to license
the Software to you, you may not use the Datalogic Product or the Software, and you must
contact the party from whom you acquired the Datalogic Product for instructions.
This End User Software License Agreement ("Agreement") is a legally binding agreement governing
the licensing of the Software and Documentation by Datalogic ADC, Inc. and its Affiliates ("Datalogic") to the entity or person who has purchased or otherwise acquired a Datalogic Product ("End User"). For purposes of this Agreement, any software that is associated with a separate end-user
license agreement is licensed to you under the terms of that license agreement. Datalogic and End
User hereby agree as follows:
1. Definitions.
1.1 "Affiliate" means a business entity currently existing or later acquired that controls, is controlled
by, or is under common control with Datalogic S.p.A.
1.2 "Documentation" means materials such as user's guides, program reference guides, quick reference guides, manuals, or similar materials associated with or related to the Datalogic Product,
whether in printed, "online", or other form.
1.3 "Proprietary Information" means: (a) source code, object code, software, documentation, and any
related internal design, system design, data base design, algorithms, technology, technical data
or information, implementation techniques, and trade secrets related to the Software, (b) any
other trade secrets marked appropriately or identified as proprietary or confidential, and (c) any
information that End User, under the circumstances, should recognize as confidential. Proprietary Information does not include any information that the receiving party can establish was (1)
in the public domain, (2) already in the receiving party's possession or rightfully known prior to
receipt, (3) rightfully learned from a third party not in violation of any other's proprietary rights,
or (4) independently developed without access to Proprietary Information.
1.4 "Datalogic Product" means the DatalogicTM QuickscanTM series scanner product, including all
embedded Software in and all Documentation related to such product, which has been purchased
or otherwise acquired by End User, whether obtained directly or indirectly from Datalogic.
1.5 "Software" means any software or computer programs of Datalogic or its third party licensors in
machine readable form which is embedded in the Datalogic Product, whether obtained directly
or indirectly from Datalogic, including any replacement, update, upgrade, enhancement or modification.
2. Scope Of License Granted.
2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license to use the Software, solely on the Datalogic Product in which it is embedded ("designated Datalogic Product"),
in machine-readable form only, solely for End User's internal business purposes. This Agreement does not convey ownership of the Software to End User. Title to the Software shall be and
remain with Datalogic or the third party from whom Datalogic has obtained a licensed right. As
used in this Agreement, the term "purchase" or its equivalents when applied to the Software
shall mean "acquire under license." End User is not entitled to receipt or use of the source code
to any Software.
2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise reproduce or remanufacture the Software, whether modified or unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Software to any other person or
organization, for purposes other than as expressly provided in this Agreement, without Datalogic's prior written consent.
3. Transfers, Support.
3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer,
or other use of the Software on other than the designated Datalogic Product will be a material
breach of this Agreement. However, Datalogic may elect not to terminate this Agreement or the
granted licenses, but instead may elect to notify End User that End User is deemed to have
ordered and accepted a license for each breaching use. End User shall pay Datalogic the applicable list price for such licenses as of the date of such breach.
3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the
Datalogic Product to any third party unless such third party agrees with Datalogic in writing to
be bound by the terms and conditions of this Agreement. Any such transfer of the Datalogic
Product absent such agreement shall be null and void.
3.3 End User may obtain support for Software from Datalogic at Datalogic's standard support fees
and under Datalogic's standard support terms and conditions in effect at the time the support is
requested.
4. Intellectual Property.
Quick Reference Guide
1
End User acknowledges that the Software constitutes valuable trade secrets of Datalogic or Datalogic's third party licensors and that the Software is protected by intellectual property laws and
treaties. The license set forth in this Agreement does not transfer to End User any ownership of Datalogic's or its third party licensors' copyrights, patents, trademarks, service marks, trade secrets, or
other intellectual property rights and End User shall have no right to commence any legal actions
to obtain such rights. End User shall not remove, modify, or take any other action that would obscure any copyright, trademark, patent marking, or other intellectual property notices contained in
or on the Datalogic Product.
5. Proprietary Information.
5.1 End User acknowledges that Proprietary Information is the confidential, proprietary, and trade
secret property of Datalogic and Datalogic's third party licensors and End User acquires no right
or interest in any Proprietary Information.
5.2 End User shall not disclose, provide, or otherwise make available the Proprietary Information of
Datalogic or its third party licensors to any person other than End User's authorized employees
or agents who are under confidentiality agreement, and End User shall not use the Proprietary
Information other than in conjunction with use of the Datalogic Product exclusively for End
User's internal business purposes. End User shall take steps to protect the Proprietary Information no less securely than if it were End User's own intellectual property.
5.3 The provisions of this Proprietary Information Section shall survive and continue for five (5)
years after the termination of this Agreement.
6. Limited Warranty.
6.1 Datalogic warrants that, under normal use and operation, the Datalogic Product will conform
substantially to the applicable Documentation for the period specified in the Documentation.
During this period, for all reproducible nonconformities for which Datalogic has been given
written notice, Datalogic will use commercially reasonable efforts to remedy nonconformities
verified by Datalogic. End User agrees to supply Datalogic with all reasonably requested information and assistance necessary to help Datalogic in remedying such nonconformities. For all
defects reported to Datalogic within the warranty period, Datalogic's liability is limited to providing End User with one copy of corrections or responding to End User's problem reports
according to Datalogic's standard assistance practices. Datalogic does not warrant that the product will meet End User's requirements or that use of the product will be uninterrupted or error
free, or that Datalogic's remedial efforts will correct any nonconformance. This limited warranty
does not cover any product that have been subjected to damage or abuse, whether intentionally,
accidentally, or by neglect, or to unauthorized repair or unauthorized installation, and shall be
void if End User modifies the product, uses the product in any manner other than as established
in the Documentation, or if End User breaches any of the provisions of this Agreement.
6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PROVIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND, EXPRESS
OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
7. Infringement.
7.1 Datalogic will defend End User against any claim in a lawsuit that the Datalogic Product furnished hereunder infringe a United States patent or copyright of a third party and Datalogic will
pay any damages finally awarded against End User by a court of competent jurisdiction that are
attributable to such claim or will pay End User's part of any settlement that is attributable to such
claim, provided, that 1) End User notifies Datalogic promptly in writing of the claim, 2) Datalogic controls the defense or settlement of the claim, and 3) End User cooperates fully with Datalogic in such defense or settlement. All notices of a claim should be sent to Datalogic ADC,
Inc., Legal Department, 959 Terry Street, Eugene, OR 97402.
7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1) procure for End
User the right to continue using the Datalogic Product, 2) modify the Datalogic Product so that it
becomes non-infringing, 3) replace the Datalogic Product with an equivalent product not subject
to such claim, or 4) provide End User an opportunity to return the Datalogic Product and receive
a refund of the purchase price paid, less a reasonable allowance for use.
7.3 Datalogic shall have no liability to End User for claims of infringement based upon 1) the use of
any Datalogic Product in combination with any product which Datalogic has not either furnished
or authorized for use with such Datalogic Product 2) the use of any Datalogic Product designed,
manufactured, or modified to the specifications of End User, or 3) End User's modification of
the Datalogic Product without written authorization from Datalogic.
2
TM
QuickScan
Lite QW2100
7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION
CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY INFRINGEMENT, CANCELS AND SUPERCEDES ANY PRIOR AGREEMENTS,
WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING SUCH
CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CONTEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PARTIES,
WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE WRITING
SIGNED BY BOTH PARTIES.
8. Limitation Of Liability.
EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS AGAINST
END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S LIABILITY FOR DAMAGES, IF
ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER
FOR THE DATALOGIC PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO
END USER OR ANY THIRD PARTY FOR LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR
SERVICE, OR FOR ANY OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL,
PUNITIVE, EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
9. Government Restricted Rights; International Use.
9.1 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions for computer software developed at private expense as set forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical Data and
Computer Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.
9.2 If End User is using the Datalogic Product outside of the United States, End User must comply
with the applicable local laws of the country in which the Datalogic Product is used, with U.S.
export control laws, and with the English language version of this Agreement. The provisions of
the "United Nations Convention on International Sale of Goods" shall not apply to this Agreement.
10. Termination.
10.1 Either party may terminate this Agreement or any license granted under this Agreement at any
time upon written notice if the other party breaches any provision of this Agreement.
10.2 Upon termination of this Agreement, End User immediately shall cease using any nonembedded
software and shall return to Datalogic or destroy all non-embedded software covered by this
Agreement, and shall furnish Datalogic with a certificate of compliance with this provision
signed by an officer or authorized representative of End User. For embedded software, End User
agrees to sign a waiver prepared by Datalogic concerning further use of the embedded Software.
End User's resumed or continued use of the embedded Software after termination shall constitute End User's agreement to be bound by the terms and conditions of this Agreement for such
use.
11. General Provisions.
11.1 Entire Agreement; Amendment. This document contains the entire agreement between the parties relating to the licensing of the Software and supersedes all prior or contemporaneous agreements, written or oral, between the parties concerning the licensing of the Software. This
Agreement may not be changed, amended, or modified except by written document signed by
Datalogic.
11.2 Notice. All notices required or authorized under this Agreement shall be given in writing, and
shall be effective when received, with evidence of receipt. Notices to Datalogic shall be sent to
the attention of Contract Administration, Datalogic ADC, Inc., 959 Terry Street, Eugene, OR
97402, or such other address as may be specified by Datalogic in writing.
11.3 Waiver. A party's failure to enforce any of the terms and conditions of this Agreement shall not
prevent the party's later enforcement of such terms and conditions.
11.4 Governing Law; Venue: This Agreement and the rights of the parties hereunder shall be governed by and construed in accordance with the laws of the State of Oregon U.S.A, without
regard to the rules governing conflicts of law. The state or federal courts of the State of Oregon
located in either Multnomah or Lane counties shall have exclusive jurisdiction over all matters
regarding this Agreement, except that Datalogic shall have the right, at its absolute discretion, to
initiate proceedings in the courts of any other state, country, or territory in which End User
resides, or in which any of End User's assets are located.
11.5 Attorneys' Fees. In the event an action is brought to enforce the terms and conditions of this
Agreement, the prevailing party shall be entitled to reasonable attorneys' fees, both at trial and
on appeal.
- END -
Quick Reference Guide
3
Software Product Policy
Datalogic reserves the right to ship its products with the latest
version of software/firmware available. This provides our customers with the very latest in Datalogic software technology.
The only exception to this policy is when the buyer has a signed
contract with Datalogic that clearly defines the terms and conditions for making software/firmware changes in products
shipped to the buyer.
Customers Under Software Support
Customers that elect to subscribe to Datalogic Software Maintenance and Support Agreement will receive 30 days advance
notification of: (1) the release of a new software version; and/or
(2) discontinuation of any prior software version that will no
longer be supported. Datalogic will provide maintenance for a
fee that will assist customers in transitioning to the next software version. If a customer is currently using
the software version being discontinued, the
customer may elect to transition to any one of
the newer versions, depending on the hardware
in use.
To arrange for a Software Maintenance and
Support Agreement please contact your Datalogic sales person.
Optional Wall
Mount Holder
Hands Free Stand/Holder
An accessory is available which holds the reader at a convenient
angle, allowing hands free scanning of items. It can also be used
as a holder. Always press in on the release buttons on both sides
of the stand to raise the arm of the stand as shown in the inset
of Figure 1, otherwise you could damage the locking mechanism. The holder “cup” can be positioned in any of the three
angles shown in the figure.
Refer to Scanning Modes on page 13 for information about programming the reader for use with the stand.
4
TM
QuickScan
Lite QW2100
Hands Free Stand/Holder
Figure 1. Adjusting the Stand
Quick Reference Guide
5
1
2
Connect/Disconnect Cable
Connect Host Interface
Keyboard Wedge Interface
Key
bo
ard
23
2
RS-232 Interface
RS
-
B
USB Interface
US
6
TM
QuickScan
Lite QW2100
Aim and Scan
3
Aim and Scan
012345
012345
65°
65°
Quick Reference Guide
7
Parts of the Reader
1
3
2
4
8
1. LED
3. Scan Window
2. Cable Release Hole
4. Trigger
TM
QuickScan
Lite QW2100
Programming Bar Codes
Programming Bar Codes
For your convenience, this guide includes the programming bar
codes required to configure the reader for use with different interface (terminal/host) types.
See the Product Reference Guide (PRG) for more complete information about programming and configurable features. You
can download the latest version of the PRG and any other available publications for the reader from the website listed on the
back cover of this manual.
Resetting the Standard Product Defaults
If you aren’t sure what programming options are in your reader,
or you’ve changed some options and want the factory settings
restored, scan the Factory Default Settings bar code below. This
will copy the factory configuration for the currently active interface to the current configuration.
Factory Default Settings
Host Interfaces
Cables may vary depending upon system configuration.
NOTE
Quick Reference Guide
Some interfaces require the reader to
start in the disabled state when powered on. If additional reader configuration is desired while in this state, pull
the trigger and hold it for five seconds.
The reader will change to a state that
allows programming with bar codes.
9
RS-232 Interface
To use an RS-232 interface, scan the bar code for the desired
RS-232 host type.
Select RS-232 Standard
Select RS-232 Wincor Nixdorf
Select RS-232 OPOS (for use with OPOS/UPOS/JavaPOS)
10
TM
QuickScan
Lite QW2100
Programming Bar Codes
USB Interface
The reader attaches directly to a USB host, or a powered USB
hub, and is powered by it. No additional power supply is required. When using a USB interface, the reader auto-detects
the USB and defaults to the USB Keyboard interface.
Select USB-COM-STD1 (simulates RS-232 standard interface)
Select USB Keyboard (with standard key encoding)
Select USB Alternate Keyboard (with alternate key encoding)
Select USB OEM
1.
Download the correct USB Com driver from www.datalogic.com.
Quick Reference Guide
11
Keyboard Wedge Interface
To use a Keyboard Wedge interface, scan the bar code for the
desired keyboard type.
Select KBD-AT
(AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95
w/Standard Key Encoding)
Select KBD-AT-NK
(IBM AT PS2 with standard key encoding but without external
kbd.)
Select KBD-AT-ALT
(AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95
w/Alternate Key)
Select KBD-AT-ALT-NK (for IBM AT PS2 with alternate key
encoding but without external keyboard)
Select KBD-XT (PC/XT w/Standard Key Encoding)
12
TM
QuickScan
Lite QW2100
Scanning Modes
Scanning Modes
If the interface type is changed, scanner configuration may be automatically reset to a different
Scanning Mode.
NOTE
The reader can operate in one of several scanning modes:
Trigger Single — When the trigger is pulled, scanning is activated
until one of the following occurs:
- a programmable duration1 has elapsed
- a label has been read
- the trigger is released
This mode is associated with typical handheld reader operation:
when the trigger is pulled, scanning starts and the product scans
until the trigger is released, or a label is read, or the maximum
programmable duration1 has elapsed.
Trigger Hold Multiple — When the trigger is pulled, scanning starts
and the product scans until the trigger is released or a programmable duration1 has elapsed. Reading a label does not disable
scanning. Double Read Timeout2 prevents undesired multiple
reads while in this mode.
Trigger Pulse Multiple — When the trigger is pulled and released,
scanning is activated until programmable duration1 has elapsed
or the trigger has been pulled again to transition to another
state. Double Read Timeout2 prevents undesired multiple reads
while in this mode.
Flashing — The reader flashes3 on and off regardless of the trigger
status.
Always On — No trigger pull is required to read a bar code. Scan-
ning is continually on. Double Read Timeout4 prevents undesired multiple reads while in this mode.
Autosense® Stand Mode — No trigger pull is required to read a bar
code. Scanning is turned on automatically when an item is
placed in reader’s field of view. If the trigger is pulled, the reader
acts as if it in Trigger Single mode. Double Read Timeout5 prevents undesired multiple reads while in this mode.
Trigger Object Sense — This mode is similar to Autosense® Stand
1.
2.
3.
4.
5.
See the Product Reference Guide (PRG) for additional programmable
features, in this case: Scanning Active Time.
Double Read Timeout is also programmed using the PRG.
Controlled by Flash On Time and Flash Off Time. Use the PRG to program these options.
Double Read Timeout is programmed using the PRG.
Double Read Timeout is programmed using the PRG.
Quick Reference Guide
13
Mode, except that a trigger pull is required to activate the decod-
er.
Scan Mode = Trigger Single
Scan Mode = Trigger Hold Multiple
Scan Mode = Trigger Pulse Multiple
Scan Mode = Flashing
Scan Mode = Always On
Scan Mode = Autosense® Stand Mode
Scan Mode = Trigger Object Sense
14
TM
QuickScan
Lite QW2100
Troubleshooting
Troubleshooting
Problem
Possible Cause
Possible Solutions
No power to the
reader.
Check system power.
Ensure power supply is
connected.
Interface or power
cables are loose.
Ensure all cable connections are secure.
Reader not programmed for correct
bar code type.
Ensure reader is programmed to read the
type of bar code
scanned. Refer to the
Product Reference Guide
(PRG) for more information.
Bar code label is
unreadable.
Check the label to ensure
it is not defaced. Try
scanning another bar
code type.
Distance between
reader and bar code
is incorrect.
Move reader closer to or
further from the bar code.
Bar code reading ability has degraded.
Scan Window has
become dirty.
Clean window using a
soft, lint-free cloth dampened with water.
Bar code is decoded
but not transmitted to
the host.
Reader not programmed for the correct host type.
Scan the appropriate
host type bar code. Refer
to the Product Reference Guide (PRG) for
more information.
Nothing happens when
the trigger is pulled.
LED comes on, but bar
code does not decode.
For detailed troubleshooting, refer
to the Product Reference Guide.
NOTE
Quick Reference Guide
15
LED and Beeper Indications
The reader’s beeper sounds and its LED illuminates to indicate
various functions or errors on the reader. A “Green Spot” also
lights to indicate a good read. The tables below list these indications. One exception to the behaviors listed in the tables is
that the reader’s functions are programmable, and may or may
not be turned on. For example, certain indications, such as the
power-up beep can be disabled using programming bar code labels. Reference the PRG for a more detailed list.
Indication
LED
Beeper
Power-up
LED flashes/blinks on
power-up, however, this
may be too rapid to view.
With a USB interface, the
LED blinks until enumeration with the host is completed.
Reader beeps four times
at highest frequency and
volume upon power-up.
Good Read
LED behavior for this indication is configurable using
the PRG.
One beep at current frequency, volume,
mono/bi-tonal setting
and duration upon a successful label scan.
ROM Failure
200ms on / 200ms off
Reader sounds one error
beep at highest volume
for 200 mS.
Limited Scanning Label Read
Reader Disabled
16
N/A
Reader 'chirps' six times
at the highest frequency
and current volume.
The LED blinks continuously 100mS on / 900 mS
off
N/A
TM
QuickScan
Lite QW2100
Ergonomic Recommendations
Ergonomic Recommendations
CAUTION
•
•
•
•
•
•
•
•
•
•
•
In order to avoid or minimize the
potential risk of ergonomic injury follow the recommendations below.
Consult with your local Health &
Safety Manager to ensure that you
are adhering to your company’s
safety
programs
to
prevent
employee injury.
Reduce or eliminate repetitive motion
Maintain a natural position
Reduce or eliminate excessive force
Keep objects that are used frequently within easy reach
Perform tasks at correct heights
Reduce or eliminate vibration
Reduce or eliminate direct pressure
Provide adjustable workstations
Provide adequate clearance
Provide a suitable working environment
Improve work procedures.
Regulatory Information
All models are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required.
Any changes or modifications to equipment, not expressly approved by Datalogic could void the user's authority to operate
the equipment.
Power Supply
Use only a power supply approved by Datalogic for this product and model. Models require either a Listed class II or class
III with a Limited Power Source(LPS) which supplies power directly to the reader. For the safety certification to be valid, class
III input power sources must be IEC/EN60950-1 (EN
60335-series, EN 60065 or relevant) approved.
Input: 100 - 240 VACOutput: 5 VDC
Max Current: 0.35 AmpsPower Out: 12.5 Watts
NOTE
Quick Reference Guide
For USB Power Off Terminal applications, attach to USB 1.0, 1.1 or
2.0 host device only.
17
Radio Frequency Interference Requirements
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However there is no guarantee
that interference will not occur in a particular installation. If the
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Tested to comply
with FCC Standards
FOR HOME OR OFFICE USE
CAUTION
The user is cautioned that
changes or modifications not
expressly approved by the party
responsible for compliance could
void the user’s authority to operate the equipment.
Radio Frequency Interference Requirements - Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Reader Labeling
The label is shown here to illustrate its location only. Please
view the labels on your product for actual details.
18
TM
QuickScan
Lite QW2100
Reader Labeling
Warranty
Datalogic warrants to Customer that Datalogic's products will be free from defects in materials and workmanship for a period of 3 years from product shipment.
Datalogic ADC Limited Factory
Warranty
Warranty Coverage
Datalogic ADC (“Datalogic”) hardware products are warranted against defects in
material and workmanship under normal and proper use. The liability of Datalogic under this warranty is limited to furnishing the labor and parts necessary to
remedy any defect covered by this warranty and restore the product to its normal
operating condition. Repair or replacement of product during the warranty does
not extend the original warranty term. Products are sold on the basis of specifications applicable at the time of manufacture and Datalogic has no obligation to
modify or update products once sold.
If Datalogic determines that a product has defects in material or workmanship,
Datalogic shall, at its sole option repair or replace the product without additional
charge for parts and labor, or credit or refund the defective products duly returned
to Datalogic. To perform repairs, Datalogic may use new or reconditioned parts,
components, subassemblies or products that have been tested as meeting applicable specifications for equivalent new material and products. Customer will allow
Datalogic to scrap all parts removed from the repaired product. The warranty period shall extend from the date of shipment from Datalogic for the duration published by Datalogic for the product at the time of purchase (Warranty period).
Datalogic warrants repaired hardware devices against defects in workmanship
and materials on the repaired assembly for a 90 day period starting from the date
of shipment of the repaired product from Datalogic or until the expiration of the
original warranty period, whichever is longer. Datalogic does not guarantee, and
it is not responsible for, the maintenance of, damage to, or loss of configurations,
data, and applications on the repaired units and at its sole discretion can return the
units in the “factory default” configuration or with any software or firmware update available at the time of the repair (other than the firmware or software installed during the manufacture of the product). Customer accepts responsibility
to maintain a back up copy of its software and data.
Warranty Claims Process
In order to obtain service under the Factory Warranty, Customer must notify Datalogic of the claimed defect before the expiration of the applicable Warranty period and obtain from Datalogic a return authorization number (RMA) for return
of the product to a designated Datalogic service center. If Datalogic determines
Customer’s claim is valid, Datalogic will repair or replace product without additional charge for parts and labor. Customer shall be responsible for packaging and
shipping the product to the designated Datalogic service center, with shipping
charges prepaid. Datalogic shall pay for the return of the product to Customer if
the shipment is to a location within the country in which the Datalogic service
center is located. Customer shall be responsible for paying all shipping charges,
duties, taxes, and any other charges for products returned to any other locations.
Failure to follow the applicable RMA policy, may result in a processing fee. Customer shall be responsible for return shipment expenses for products which Datalogic, at its sole discretion, determines are not defective or eligible for warranty
repair.
Warranty Exclusions
The Datalogic Factory Warranty shall not apply to:
(i)
any product which has been damaged, modified, altered, repaired or
upgraded by other than Datalogic service personnel or its authorized representatives;
Quick Reference Guide
19
(ii)
any claimed defect, failure or damage which Datalogic determines was
caused by faulty operations, improper use, abuse, misuse, wear and tear,
negligence, improper storage or use of parts or accessories not approved
or supplied by Datalogic;
(iii) any claimed defect or damage caused by the use of product with any other
instrument, equipment or apparatus;
(iv)
any claimed defect or damage caused by the failure to provide proper
maintenance, including but not limited to cleaning the upper window in
accordance with product manual;
(v)
any defect or damage caused by natural or man-made disaster such as but
not limited to fire, water damage, floods, other natural disasters, vandalism or abusive events that would cause internal and external component
damage or destruction of the whole unit, consumable items;
(vi)
any damage or malfunctioning caused by non-restoring action as for
example firmware or software upgrades, software or hardware reconfigurations etc.;
(vii) the replacement of upper window/cartridge due to scratching, stains or
other degradation and/or
(viii) any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch screen, triggers etc.).
No Assignment
Customer may not assign or otherwise transfer its rights or obligations under this
warranty except to a purchaser or transferee of product. No attempted assignment
or transfer in violation of this provision shall be valid or binding upon Datalogic.
DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR
OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM
DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER
THE ABOVE. THE REMEDY SET FORTH IN THIS WARRANTY STATEMENT IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR
WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST
PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGES.
Risk of Loss
Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall assume risk of loss or damage for product in Datalogic’s possession.
In the absence of specific written instructions for the return of product to Customer, Datalogic will select the carrier, but Datalogic shall not thereby assume any
liability in connection with the return shipment.
20
TM
QuickScan
Lite QW2100
WEEE Statement
WEEE Statement
Waste Electrical and Electronic Equipment (WEEE) Statement.
English
For information about the disposal of Waste Electrical and Electronic Equipment (WEEE), please refer to the website at www.datalogic.com.
Italian
Per informazioni sullo smaltimento delle apparecchiature elettriche
ed elettroniche consultare il sito Web www.datalogic.com.
French
Pour toute information relative à l’élimination des déchets électroniques (WEEE), veuillez consulter le site internet www.datalogic.com.
German
Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE) erhalten Sie auf der Webseite www.datalogic.com.
Spanish
Si desea información acerca de los procedimientos para el desecho
de los residuos del equipo eléctrico y electrónico (WEEE), visite la
página Web www.datalogic.com.
Portuguese
Para informações sobre a disposição de Sucatagem de Equipamentos Elétricos e Eletrônicos (WEEE -Waste Electrical and Electronic
Equipment), consultar o site web www.datalogic.com.
Chinese
有关处理废弃电气电子设备 (WEEE) 的信息,请参考 Datalogic 公
司的网站 www.datalogic.com/。
Japanese
廃電気電⼦機器 (WEEE) の処理についての関連事項は
Datalogic のサイト www.datalogic.com をご参照下さい。
Quick Reference Guide
21
China RoHS
22
TM
QuickScan
Lite QW2100
China RoHS — Power Supply
China RoHS — Power Supply
Quick Reference Guide
23
Cleaning
When needed, gently clean the scan window using a lens cloth
or lint-free cleaning tissues dampened with a nonabrasive, mild,
water-based glass cleaner. The other surfaces can also be cleaned
using the same cleaning agents. Do not allow fluids to flow into
the internal parts of the scanner.
DO NOT use abrasive
pads or cleaning agents.
CAUTION
24
TM
QuickScan
Lite QW2100
DECLARATION OF CONFORMITY
EC-67
Rev.: 3
Pag.: 1 di 1
Datalogic ADC, Inc.
959 Terry St.
Eugene, OR 97402 USA
14
La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Datalogic ADC, Inc. per:
This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC, Inc. for:
Cette déclaration de conformité est établie sous la seule responsabilité de Datalogic ADC, Inc:
Diese Konformitätserklärung wird unter der alleinigen Verantwortung des Datalogic ADC, Inc. erteilt für:
Esta declaración de conformidad se expide bajo la exclusiva responsabilidad de Datalogic ADC, Inc. para:
QuickScan Lite QW2100 Barcode Reader
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
2004/108/EC EMC Directive
2011/65/EU RoHS Directive (8 June 2011)
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety.
Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und
Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y
las Medidas de seguridad relativas al producto.
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
EN 55022:2010 (CLASS B ITE),
DECEMBER 2010
LIMITS AND METHODS OF MEASUREMENTS OF RADIO DISTURBANCE
EN 55024:2010, NOVEMBER 2010
INFORMATION TECHNOLOGY EQUIPMENT- IMMUNITY CHARACTERISTICS LIMITS AND METHODS OF MEASUREMENT
EN 60950-1, APRIL 2006
+A11:2009+A1:2010+A12:2011
INFORMATION TECHNOLOGY EQUIPMENT - SAFETY PART 1: GENERAL REQUIREMENTS
EN 50581, SEPT 2012
TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL
CHARACTERISTICS OF INFORMATION TECHNOLOGY EQUIPMENT
AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF
HAZARDOUS SUBSTANCES
LIPPO DI CALDERARA, MARCH, 2014
RUGGERO CACIOPPO
QUALITY & RELIABILITY MGR-EUROPE
www.datalogic.com
© 2011-2014 Datalogic ADC, Inc. • All rights reserved. •
Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.
Datalogic ADC, Inc.
959 Terry Street | Eugene |OR 97402 | USA
Telephone: (1) 541-683-5700 | Fax: (1) 541-345-7140
820036314 (Rev. C)
April 2014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising