BELGACOM | Twist 408 | User manual | BELGACOM Twist 408 User manual

BELGACOM Twist 408 User manual
Belgacom Twist 408
TM
User manual
472_Cover_Twist408 4
18/07/07 10:17:23
7893 – Philips Twist 408 – 07 – 16.03.07
7893 – Philips Twist 408 – 07 – 16.03.07
Table of contents
1
1.1
1.2
1.3
1.4
Important
Power requirements
Using GAP standard compliance
Recycling and disposal
Environmental information
4
4
4
5
5
2
Your Twist 408 Digital Cordless
Telephone
What’s in the box?
What you will also need
Overview of the handset
Handset display
Overview of the base
Menu navigation
6
6
6
7
8
9
9
2.1
2.2
2.3
2.4
2.5
2.6
3
3.1
3.2
3.3
10
10
10
3.4
Getting started
Position the base
Connect the base
Install and charge the handset
batteries
Using multipacks
4
4.1
4.1.1
4.1.2
4.1.3
4.1.4
4.1.5
4.1.6
4.1.7
4.1.8
4.1.9
4.1.10
Using your Twist 408
Calls
Make a call
Pre-dial
Dial one touch numbers 1 to 9
Call from the phonebook
Call from the call log
Answer a call
Adjust volume
Mute
End a call
Switch handset on/off
12
12
12
12
12
12
12
12
12
12
12
13
Table of contents
11
11
4.2
4.3
4.3.1
4.3.2
4.3.3
4.3.4
4.4
4.4.1
5
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
5.10.1
5.10.2
5.10.3
5.10.4
6
6.1
6.1.1
6.1.2
6.1.3
6.1.4
6.1.5
Call a second external number
Intercom
Call another handset
Transfer an external call to another
handset
Switch between an internal and
external call
Three-party conference call
PhoneMail
Dial your PhoneMail service
13
13
13
13
13
13
13
13
Phonebook
14
View and dial phonebook entries
14
Store an entry
14
Entering names
14
Character map
14
Enter a pause
15
View an entry
15
Edit an entry
15
Delete an entry
15
Delete all entries
15
Copy phonebook to another handset 15
One touch keys
15
Dial a one touch number
16
Store a phonebook entry as aone
touch number
16
Delete a one touch number
16
Caller ID and Call log
17
Call log
17
View the call log
17
Dial from the call log
17
Save a number from the call log to the
phonebook
17
Delete a call log entry
18
Delete entire call log
18
1
7893 – Philips Twist 408 – 07 – 16.03.07
18
18
18
9.4
9.5
9.6
9.7
9.8
9.9
9.10
9.11
Registration
Register a handset
Select a base
Unregister a handset
PIN
Reset
Default settings
Intrusion
Clock & Alarm
Set date and time
Set alarm
Set alarm melody
19
19
19
19
10
10.1
10.1.1
10.1.2
8
8.1
8.1.1
8.1.2
8.1.3
8.1.4
8.1.5
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
Personal settings
Handset tones
Ring volume
Ring melody
Group melody
Key tones on/off
First ring
Handset name
Auto pick up
Auto hang up
Display language
Babysit mode on/off
Babysit
Backlight on/off
Keypad lock
20
20
20
20
20
20
20
20
21
21
21
21
21
21
21
10.2
10.2.1
10.4
10.5
10.6
Network Services
25
Call forward for all calls
25
Set call forward number
25
Activate/Deactivate call forward for all
calls
25
Call forward when busy
25
Activate/Deactivate call forward when
busy
25
Set call forward when busy
25
Call forward when unanswered
25
Set call forward number
25
Activate/Deactivate call forward when
unanswered
25
PhoneMail
25
Ringback
26
Cancel Ringback
26
11
11.1
11.2
Maintenance and replacement
Cleaning
How to replace the batteries
9
9.1
9.2
9.2.1
9.2.2
9.3
9.3.1
9.3.2
9.3.3
Advanced settings
Recall time
Call barring
Switch call barring on/off
Set a number to be barred
Baby call
Switch baby call on/off
Set the baby call number
Dial a baby number
22
22
22
22
22
22
22
22
23
12
Technical data
Battery life and range
Low battery warning
Battery type
Out of range warning
6.2
6.2.1
6.2.2
6.2.4
6.2.5
Redial
Redial the last number
View and dial a number in the redial l
ist
Copy a redial number to the
phonebook
Delete a redial list entry
Delete entire redial list
7
7.1
7.2
7.3
6.2.3
2
18
18
18
10.2.2
10.3
10.3.1
10.3.2
23
23
23
23
23
24
24
24
27
27
27
28
28
28
28
28
Table of contents
7893 – Philips Twist 408 – 07 – 16.03.07
13
Frequently asked questions
Charging
Calls
Caller Line Identification (CLI) service does
not work
Phonebook
Display
Registration
Interference
29
29
29
14
32
Index
Table of contents
29
29
29
29
29
3
7893 – Philips Twist 408 – 07 – 16.03.07
1
Important
Take time to read this user manual before
you use your telephone. It contains important
information and notes regarding operating
your telephone.
1.1
Power requirements
• This product requires an electrical supply
of 220–240 volts, alternating monophased
power, excluding IT installations defined in
standard EN 60-950. In case of power
failure, the communication can be lost.
• The electrical network is classified as
hazardous according to criteria in the
standard EN 60-950. The only way to power
down this product is to unplug the power
supply unit from the electrical outlet.
Ensure the electrical outlet is located close to
the apparatus and is always easily accessible.
• The voltage on the network is classified
as TNV-3 (Telecommunication Network
Voltages), as defined in the standard
EN 60-950.
w Warning
• This equipment is not designed to make
emergency calls in the event of a power
failure. An alternative has to be made available
to allow emergency calls.
• High voltage. Never open the product or
attempt any repair.
• Keep the product away from liquid.
• Never use any battery type other than the
one supplied. There is a risk of explosion if the
batteries are replaced by an incorrect type.
• When the phone is ringing avoid holding
the earpiece too close to your ear as it may
damage your hearing.
• Do not use the product in places where there
are explosive hazards.
• Do not let small metal objects come into
contact with the product. This can deteriorate
audio quality and damage the product.
4
• Handsfree activation could suddenly increase
the volume in the earpiece to a very high level:
make sure the handset is not too close to
your ear.
• Refer also to the Cautions in chapters and
subchapter sections.
1.2
Using GAP standard compliance
The GAP standard guarantees that all DECT
GAP handsets and base stations comply with
a minimum operating standard irrespective of
their make.Your handset and base station are
GAP compliant, which means the minimum
guaranteed functions are: register a handset,
take the line, receive a call and dial.
The advanced features may not be available if
you use another handset than a Twist 408 with
your base station. To register and use
your Twist 408 handset with a GAP standard
base station of a different make, first follow
the procedure described in the manufacturer’s
instructions, then follow the procedure
described on page 23.
To register a handset of another make to
the Twist 408 base station, place the base
station into registration mode, then follow the
procedure in the manufacturer’s instructions.
Important
7893 – Philips Twist 408 – 07 – 16.03.07
1.3
Recycling and disposal
Disposal instructions for old products
The WEEE directive (Waste Electrical and
Electronic Equipment; 2002/96/EC) has been put
in place to ensure that products are recycled
using best available treatment, recovery and
recycling techniques to ensure human health and
high environmental protection.
Your product is designed and manufactured with
high quality materials and components, which
can be recycled and reused. Do not dispose of
your old product in your general household
waste bin.
Inform yourself about the local
separate collection system for
electrical and electronic products
marked by this symbol:
Use one of the following disposal options:
1 Dispose of the complete product (including its
cables, plugs and accessories) in the designated
WEEE collection facilities.
1.4
Environmental information
• The equipment that you bought has
required the extraction and use of natural
resources for its production. It may content
hazardous substances for the health and the
environment.
• In order to avoid the dissemination of
those substances in our environment and
to diminish the pressure on the natural
resources, we encourage you to use the
appropriate take-back systems. Those systems
will reuse or recycle most of the materials of
your end life equipment in a sound way.
• The crossed-bin symbol invites you to use
those systems.
• If you need more information on the
collection, reuse and recycling systems,
please contact your local or regional waste
administration.
• You can also contact us for more information
on the environmental performances of our
products.
2 If you purchase a replacement product, hand
your complete old product back to the retailer.
He should accept it as required by the WEEE
directive.
Disposal instructions for batteries
Batteries should not be disposed of with
general household waste.
Packaging information
Belgacom has marked the packaging with standard
symbols designed to promote the recycling and
appropriate disposal of your eventual waste.
A financial contribution has been paid
to the associated national recovery and
recycling system.
The labelled packaging material is
recyclable.
Important
5
7893 – Philips Twist 408 – 07 – 16.03.07
2
Your Twist 408 Digital Cordless Telephone
2.1
What’s in the box?
Twist 408 handset
Power adaptor
Battery door
Line cord*
Belgian plug
������������������������������������
�����
�����������������������
�� � ���������
� �������
��������������������������������
�������������������������������������������
7893 SE440 UG [web].indd 1
2x AAA rechargeable
batteries
Twist 408 base
2/4/07 10:25:39
User manual
2.2
What you will also need
• For the call log to function, subscribe to Belgacom Caller Line Identification service.
• For PhoneMail to function, subscribe to Belgacom PhoneMail service.
n Note
* The line adaptor may not be attached to the line cord. If this is the case, please connect the line cord
to the line adaptor before plugging it into the line socket.
w Warning
Always use the cables and batteries supplied.
6
Your Twist 408 Digital Cordless Telephone
7893 – Philips Twist 408 – 07 – 16.03.07
2.3
Overview of the handset
1
2
3
4
14
5
13
6
12
7
8
11
9
10
Your Twist 408 Digital Cordless Telephone
1 Earpiece
2 LED
If you have subscribed to Caller Line
Identification, the event LED also blinks when
there is a new call or a new PhoneMail message.
3 Display
See page 8 for an overview of the display icons.
4 Menu key
Enter the main menu. Select the option displayed
on screen. Confirm menu option –
OK is displayed on screen.
5 Call log / Scroll Up / Volume up
Open the calls log.
Scroll up through lists and settings.
Increase the earpiece volume during a call.
6 Talk / Recall
Make or answer a call.
Use recall (R) functions.
7 Keypad
Press to dial number in during a call
or in predial.
Press and hold a key 1- 9 for one touch dialling
of pre-set numbers.
8
/ Keypad lock
Press and hold to lock/unlock the keypad.
Dial a star.
9 Loudspeaker key
Activate and deactivate the loudspeaker during
a call.
w Warning
Handsfree activation can suddenly increase the
volume in the earpiece to a very high level. Make
sure the handset is not too close to your ear.
10 Intercom (at least 2 handsets needed)
In standby mode, use to make an internal call.
During a call, use to transfer an external call to
another handset.
11 # / Ringer off / Pause
Press and hold to switch handset ringer on or off.
When dialling or storing a number, press and hold to
enter a pause (P).
Dial a #.
*
7
7893 – Philips Twist 408 – 07 – 16.03.07
12 End / Exit / Switch handset on/off
End a call.
When in a menu, go back to standby mode.
Press and hold to switch handset off (when in
standby) or on.
13 Phonebook / Scroll Down / Volume down
Open the phonebook.
Scroll down through lists and menus.
Decrease the earpiece volume.
14 Redial / Scroll right / Clear / Mute
Open the redial list. Scroll to the right.
Delete characters on screen when entering
names and numbers. Mute / unmute the
microphone during a call.
Go back to previous menu level –
BACK displayed on screen.
2.4
1
Status icons
f Battery status
P
E
L
b
C
S
M
N
On when the line is in use.
Flashes when there is an incoming call.
Flashes when you have new PhoneMail
messages.
Off when you have no PhoneMail messages.
On when you have missed calls and new
number(s) in the call log.
Phonebook is open.
The alarm clock has been set.
Handsfree mode.
Handset ringer is off.
Steady when the handset is registered and
within range of the base.
Flashes when the handset is out of range or
searching for base.
Handset display
2 OK displayed
Press the m key to select and validate a setting
1
3 A displayed
Press u or d to scroll through the options
in a menu, to open the phonebook or call list
when in standby.
4 BACK displayed
Press > to go back to the previous menu
option, to cancel an action or to delete
a character.
OK
2
8
BACK
3
4
Your Twist 408 Digital Cordless Telephone
7893 – Philips Twist 408 – 07 – 16.03.07
2.5
Overview of the base
1
1
Paging
Paging is a useful way of finding lost handsets.
1 Press p on the base.
All handsets ring.
2 Press p again to cancel the paging call or
press any key on the handset to stop the
paging call.
Standby mode
If you do not press any button on the handset
for 15 seconds the display will automatically
return to standby. It will also return to standby
when the handset is placed on the base
or charger.
2.6
Menu navigation
The basic steps of navigating through the menu
and on-screen options.
1 From the standby screen, press m.
The main menu is opened.
2 Use the u or d keys to scroll through
the menu.
3 Soft key options OK and BACK are
displayed. Press m to select OK and open
a sub-menu or validate an option.
Press >` to select BACK and go back to
previous menu level, correct a character or
cancel an action.
4 Press e to return to standby.
Your Twist 408 Digital Cordless Telephone
9
7893 – Philips Twist 408 – 07 – 16.03.07
3
Getting started
1
Plug the line cord and the power cable into
the sockets at the back of the base.
2
Plug the other ends of the line cord and
power cable into the telephone socket and
mains power socket.
3.1
Position the base
Place the base within reach of the telephone line
and electricity sockets.
t Tip
The position in which you place the base can
have an effect on the range and performance of
your product. Avoid placing the base too close
to large metal objects such as filing cabinets,
radiators or electrical appliances. This can impair
the range and sound quality. Buildings with
thick internal and external walls may impair
transmission of signals to and from the base.
3.2
Connect the base
w Warning
• Make sure you connect the power adaptor
and telephone line cord correctly as incorrect
connection could damage the product.
• Always use the telephone line cord supplied
with the unit. Otherwise you may not get a
dial tone.
10
Getting started
7893 – Philips Twist 408 – 07 – 16.03.07
3.3
Install and charge the handset
batteries
w Warning
• The handset must be charged for at least 24
hours before using it for the first time.
• Never use any battery type other than the
one supplied. There is a risk of explosion if the
batteries are replaced by an incorrect type.
Your Twist 408 is supplied with two
rechargeable batteries.
1
2
3
4
Slide off the battery door (if fitted).
Insert the batteries as indicated and slide the
door back on.
Place the handset face up on the base
to charge.
A beep confirms the handset is placed correctly
and charging will begin.
When there is enough power in the
batteries, the handset will automatically
register with the base.
The standby screen is displayed. Or if the display
shows WELCOME: you must select the language.
Getting started
• WELCOME is displayed and scrolls in
different languages.
• Press m.
Scroll u or d to select your language and
press m. CONFIRM? is displayed.
• Press OK to confirm.
n Note
• If you receive a call before the language is set,
you can take the call. When the call is ended
the display returns to language setting mode.
• If you make a mistake when choosing your
language, please refer to ‘Display language’
on page 21.
5 Leave the handset until the batteries are fully
charged (at least 24 hours).
The handset batteries are fully charged when
the charging animation stops and the f
(battery charged) icon is displayed.
w Warning
If you insert alkaline batteries instead of
the NiMH batteries WARNING BATT will
appear on the display. Replace imediately
with batteries supplied.
3.4
Using multipacks
If you have purchased a multipack you will have
additional handsets, chargers, power adaptors
and AAA rechargeable batteries.
1 Plug the chargers into a power socket.
2 Install the batteries supplied into the
other handsets.
3 Place the handsets on the chargers to fully
charge the batteries for at least 24 hours.
11
7893 – Philips Twist 408 – 07 – 16.03.07
4
Using your Twist 408
4.1
Calls
4.1.1 Make a call
1 Press r.
2 Dial the telephone number.
4.1.2 Pre-dial
Enter the phone number (maximum 24
digits). If you make a mistake press >.
2 Press r to dial the phone number entered.
1
4.1.3 Dial one touch numbers 1 to 9
1 Press and hold a key from 1 to 9 until
the number is displayed and dialled.
If no number is stored, you hear a beep.
4.1.4 Call from the phonebook
Press d.
The first entry in the phonebook is displayed.
2 Scroll u or d to the entry you want.
3 Press r to dial the number.
t Tip
Instead of scrolling to browse the phonebook
entries, press the numeric key corresponding to
the first letter of the entry you wish to locate.
For example, pressing 2 will show the entries
starting with A. Pressing 2 again will show the
entries starting with B, etc...
1
4.1.5
You need to subscribe to Belgacom Caller Line
Identification service to be able to see the
caller’s number in the call log. See ‘Call log’ on
page 17 for more details.
2
3
Press u to enter CALL LOG menu.
The first entry in the call list is displayed.
Scroll u or d to the entry you want.
Press r to dial the number.
4.1.6 Answer a call
1 When the phone rings and flashes in the
display, press r or press v to answer
the call via the loudspeaker.
P
12
When the phone is ringing, avoid holding the
earpiece too close to your ear as it may damage
your hearing. Handsfree activation can suddenly
increase the volume in the earpiece to a very
high level. Make sure the handset is not too
close to your ear.
n Note
If you have subscribed to your Belgacom
Caller Identity service and assigned a VIP Group
to the caller’s number, the caller’s details are
displayed before the phone starts ringing (see
‘Store an entry’ on page 14 and ‘Group melody’
on page 20).You can set your phone to give the
default ringtone as soon as the call is received
then once the caller’s identity is displayed, the
assigned ringtone will start. See ‘First ring’, page 20.
t Tip
If Auto Pick up mode (see page 21) is on, simply
lift up the handset from its base to answer the
call. The default setting is off, in which case you
will need to press r to answer a call.
n Note
An incoming call has priority over other events.
Whenever there is an incoming call, other
operations in progress such as phone settings,
menu navigation, etc. will be ended.
4.1.7 Adjust volume
During a call, press u or d to adjust
the earpiece or loudspeaker volume.
The level is shown in the handset display.
1
Call from the call log
n Note
1
w Warning
4.1.8 Mute
1 During a call, press >.
The microphone is muted.
2 Press > again to turn the microphone
back on.
4.1.9 End a call
Press e.
After you hang up, the duration of your call is
displayed for 5 seconds.
n Note
If auto hang-up is on (see page 21) simply
replace the handset on the base to end the call.
The default setting is ON.
1
Using your Twist 408
7893 – Philips Twist 408 – 07 – 16.03.07
4.1.10 Switch handset on/off
1 Press and hold e until the handset
switches off.
2 Press and hold e again to switch the
handset back on.
4.2
Call a second external number
Put an external caller on hold to make a second
external call.You can then switch between both
callers or hold a 3-way conference call.
1
2
3
4
During your call, press m. Scroll d to
INIT 2ND CALL.
Press m.
Display shows CALLING R
Enter the second number.
When your second caller answers, press
m to open the option menu:
CONFERENCE – press m to initiate a 3-way
with an external caller and internal caller.
SWITCH CALLS – press m to switch
between the two callers.
4.3
Intercom
This feature is only available when there are
at least 2 registered handsets. It allows you to
make internal calls, transfer external calls from
one handset to another and use the conference
option.
4.3.1 Call another handset
1 Press c.
• If you have two handsets, the other handset is
called automatically.
• If more than two handsets are registered
to the base, their numbers are displayed,
e.g. 2345*. Enter the number of the handset
you want to call or press * to ring all
handsets.
2 Press e to hang up.
n Note
If the handset does not belong to Twist 408
range, this function may not be available.
4.3.2
1
Transfer an external call to
another handset
During an external call, press c.
Your caller is put on hold.
Using your Twist 408
2
3
Enter the number of the handset you want to
call or press * to ring all handsets.
If there are only two handsets, the other handset
is called automatically.
When the other handset answers, announce
the caller then press e to transfer the call.
If the other handset does not answer, press
c to talk to your caller again.
4.3.3
1
2
3
4
5
Switch between an internal and
external call
During an external call, press c.
Your caller is put on hold.
Enter the number of the handset you want to
call or press * to ring all handsets.
If there are only two handsets, the other handset
is called automatically.
When the other handset answers you can
speak privately to your internal caller.
Press c to switch between both callers.
Press e to hang up.
4.3.4 Three-party conference call
1 During an external call, press c.
Your caller is put on hold.
2 Enter the number of the handset you want to
call or press * to ring all handsets.
If there are only two handsets, the other handset
is called automatically.
3 When the other handset answers, announce
the call then press and hold c to connect
both calls. If the other handset does not
answer, press c to talk to your caller again.
4 Press e to hang up.
4.4
PhoneMail
If you have subscribed to Belgacom PhoneMail
service, your Twist 408 displays
when you
have a new PhoneMail.
E
4.4.1 Dial your PhoneMail service
1 Press and hold 1.
The number is displayed and dialed. Follow the voice
prompts to play, save and delete your messages.
n Note
You can turn off the
icon. When viewing the
Calls log, press and hold 5.
E
13
7893 – Philips Twist 408 – 07 – 16.03.07
5
Phonebook
The Twist 408 handset phonebook can store up
to 100 names and numbers.
n Note
Numbers can be up to 24 digits long and names
up to 12 characters long. Entries are stored in
alphabetical order.
5.1
1
2
3
5.2
View and dial phonebook entries
Press d. Display shows the first entry.
Scroll u or d to the entry you want.
Or
To search alphabetically, press d then
press the key with the first letter of the
name, e.g. if the name begins with N, press
6 twice. The display shows the first entry
beginning with N. If required, press u or d
to scroll to the exact entry.
Press r to dial the entry displayed.
Store an entry
1 Press m. PHONEBOOK is displayed.
2 Press m. NEW ENTRY is displayed.
3 Press m. ENTER NAME is displayed.
4 Enter a name and press m.
5 Enter a number. Press m to save. Press
u or d to select NO GROUP, GROUP A,
B or C and press m to confirm.
6 Press e to return to standby.
n Note
You can assign individual contacts to specific
groups of your choice. For example, Group A
contains phone numbers of all your co-workers.
You can also assign a specific ring melody to
that group (see ‘Group Melody’ on page 20).
You can benefit from this feature only if you have
subscribed to Caller Line Identification service
from Belgacom. If it is the case, every time
someone from that group calls you, you will hear
the designated ringtone for that group.
n Note
Cancel storing an entry by pressing e at any
time during the process.
14
5.3
Entering names
Use the alphanumeric keypad to enter names in
the phonebook.
For instance to enter the name Paul
P Press 7 once
A Press 2 once
U Press 8 twice
L Press 5 three times
To enter a space press 1
Press > to delete a character or press and
hold > to delete all characters.
5.4
Character map
Use the keypad to enter names and characters.
1
2
3
4
5
6
7
8
9
0
Space
1
-
A
B
C
2
D
E
F
3
G
H
I
4
J
K
L
5
M
N
O
6
P
Q
R
S
7
T
U
V
8
?
W
X
Y
Z
9
0
-
/
\
#
<
> *
+
Using your Twist 408
7893 – Philips Twist 408 – 07 – 16.03.07
5.5
Enter a pause
If your Twist 408 is connected to a switchboard,
you may need to enter a pause in a stored
number. This gives the switchboard time to get
an outside line. A Pause is normally stored after
the switchboard access code
1
5.8
1
2
3
4
5
Delete an entry
Press d.
Scroll to the entry you want to delete and
press m.
Scroll d to DELETE ENTRY and press m.
Display shows CONFIRM?. Press m.
Press e to return to standby.
When storing a number, press and hold
# until the display shows P. You can then
5.9
continue storing the phone number.
1
2
3
4
5.6
View an entry
In standby:
1 Press d.
2 Enter the first letter of the name to search
alphabetically then scroll u or d to the
exact entry. The name is displayed.
3 Press > to display the number. If there are
more than 12 digits, press > again to see
the rest of the number.
4 Press e to return to standby.
During a call:
1 Press m twice to open the
phonebook menu.
2 Enter the first letter of the name you want
then scroll u or d if necessary to
the exact name. Press > to display the
number. If there are more than 12 digits,
press > again to see the rest of the
number.
3 Press e to cancel the phonebook display.
4 Press e again to end the call.
5.7
Edit an entry
d.
2 Scroll u or d to the entry you want to
edit and press m. EDIT ENTRY is dsplayed.
Press m again.
3 Edit the name and press m to confirm.
Use > to delete characters.
4 Press m and edit the number.
5 Press m to confirm.
6 Scroll u or d to select NO GROUP,
GROUP A, B or C and press m to confirm.
7 Press e to return to standby.
1 Press
Using your Twist 408
Delete all entries
Press m twice.
Scroll d to DELETE ALL and press
Display shows CONFIRM?. Press m.
Press e to return to standby.
m.
5.10
Copy phonebook to another
handset
1 Press m twice.
2 Scroll d to PB TRANSFER and press m.
3 Scroll u or d to the number of the
handset you want the phonebook copied to.
Press m.
4 On the destination handset, press m. The
phonebook is transferred.
5 Press e to return to standby.
n Note
If an entry with the same name and number is
already stored in the receiving handset, it will
not be copied across.
5.10.1 One touch keys
The keys 1 to 9 enable one touch dialling
of entries stored in the phonebook.
n Note
Key 1 is prestored with 1230 (PhoneMail
number).
15
7893 – Philips Twist 408 – 07 – 16.03.07
5.10.2 Dial a one touch number
1 Press and hold a number key 1 to 9.
The number is displayed and dialled.
2 Press e to cancel the dialling and return
to standby.
5.10.3 Store a phonebook entry as a
one touch number
1 Press m twice.
2 Scroll d to DIRECT MEM and press m.
3 Press u or d to select KEY 1 - 9
and press m. The current entry, if any, is
displayed.
4 Press m again to open the options menu.
5 Press m to ADD an entry from the
phonebook.
6 Scroll u or d to the entry you want.
Press m to confirm or e to return to
standby.
5.10.4 Delete a one touch number
1 Press m twice then scroll u or d to
DIRECT MEM and press m.
2 Scroll u or d to select KEY 1- 9.
3 Press m to display the current entry.
Press m again to open the options menu.
4 Scroll d to DELETE and press m
5 Display shows CONFIRM?. Press m.
6 Press e to return to standby.
16
Using your Twist 408
7893 – Philips Twist 408 – 07 – 16.03.07
6
Caller ID and Call log
If you have subscribed to Caller Line
Identification (CLI), and provided the identity
of the caller is not withheld, the number of the
caller will be displayed together with the date
and time of the call.
n Note
• If the caller’s number is stored in your
phonebook along with a name, the name will
also be displayed.
• If the telephone number is not available
for incoming calls, the handset will
display UNKNOWN.
6.1
Call log
The call log contains details of missed and
received call. Details include the date and time
of the call. Entries are displayed in chronological
order with the most recent call at the top of
the list.
n Note
• When the call log is full, a new call replaces
the oldest in the list.
• The received and missed calls log holds details
of up to 50 calls.
• If you receive more than one call from the
same number, only the most recent call is kept
in the call log.
When you have missed calls (incoming calls
that you haven’t answered) the
icon will be
displayed in the display on all handsets registered
to the base.
If one handset is used to view the calls log, the
icon on the other handsets continue to flash
(Multipack user only).
L
Using your Twist 408
6.1.1 View the call log
1 Press u to enter the CALL LOG option
menu.
The most recent number - or name if stored in
the phonebook - is displayed. New calls are
marked with
icon flashing.
2 Scroll u or d through the calls log.
At the end of the log, you will hear a beep.
Press > to see the number. If the number
has more than 12 digits, press > to see
the rest of the number.
3 Press e to return to standby.
L
n Note
L
The
icon stops flashing once all new calls
have been viewed.
6.1.2 Dial from the call log
Press u to enter the CALL LOG option
menu.
2 Scroll u or d to the entry you want.
3 Press r or v to dial.
1
6.1.3
1
2
3
4
5
6
Save a number from the call log to
the phonebook
Press u. Press m.
Scroll u or d to the number you want.
Press m. SAVE NUMBER is displayed.
Press m. ENTER NAME is displayed. Use the
keypad to enter the name.
Press m then the number is displayed, the
user can then edit the number if required
and must press m to save the number
(even if has not been edited).
Press u or d to select NO GROUP,
GROUP A, B or C and press m to confirm.
17
7893 – Philips Twist 408 – 07 – 16.03.07
6.1.4 Delete a call log entry
1 Press u. The most recent call is displayed.
2 Scroll u or d to the number you want.
3 Press m then scroll d to DELETE and
press m.
4 Display shows CONFIRM?. Press m to
confirm.
5 Press e to return to standby.
6.1.5 Delete entire call log
Press u then m.
Scroll d to DELETE ALL and press m.
Display shows CONFIRM?. Press m to
confirm. Press e to return to standby.
1
2
3
6.2
Redial
The Twist 408 lets you redial any of the last 10
numbers called. Numbers can be up to 24
digits long.
6.2.1 Redial the last number
1 Press >. The last number dialled is displayed.
If the number has more than 12 digits, the
display shows and the cursor blinks.
Press > to display the rest. If the number
is stored in the Phonebook, the name is
displayed as well.
2 Press r to dial.
6.2.3
1
2
3
4
5
6
7
Copy a redial number to the
phonebook
Press > and scroll u or d to the
entry you want.
Press m.
Display shows SAVE NUMBER. Press m.
Enter the name and press m.
Edit the number if required and press m.
Press u or d to select NO GROUP,
GROUP A, B or C and press m to confirm.
Press e to return to standby.
6.2.4 Delete a redial list entry
Press >. Scroll u or d to display the
number you want.
2 Press m and scroll d to DELETE then
press m.
3 Display shows CONFIRM?. Press m to
confirm, then e to return to standby.
1
6.2.5 Delete entire redial list
1 Press > then press m.
2 Scroll d to DELETE ALL and press m.
3 Display shows CONFIRM?. Press m to
confirm. Press e to return to standby.
6.2.2
1
2
18
View and dial a number in the
redial list
Press >. The last number dialled is
displayed. If required, scroll u or d to
display the number you want.
Press r to dial the number.
Using your Twist 408
7893 – Philips Twist 408 – 07 – 16.03.07
7
Clock & Alarm
If you subscribe to Belgacom Caller
Identification service, the time on your Twist 408
may be set automatically each time you receive
a call.
You can also set or adjust the time using the
Clock & Alarm menu.
7.1
1
2
3
4
5
Set date and time
Press m and scroll d to CLOCK/ALARM.
Press m. Display shows DATE & TIME, then
press m.
Enter the date using the format DD-MM
e.g. 04/08 for 4th August.
Press m and enter the time using the 24
hour format HH – MM, e.g. 14:45 for 2.45pm.
Press m to confirm.
Press e to return to standby.
7.2
Set alarm
Press m, scroll d to CLOCK/ALARM and
press m.
2 Scroll d to SET ALARM and press m.
3 Scroll u or d to OFF, ON ONCE or
ON DAILY and press m.
4 If you select ON ONCE or ON DAILY, enter the
time using the 24 hour format HH - MM e.g
14:45 for 2:45pm and press m.
5 Press e to return to standby. When the
alarm goes off, press any key to stop the ring.
n Note
• Once the alarm is set to on, the
icon is
displayed.
• The alarm will ring at the medium level. ALARM
ON and the
will flash on the display.
1
C
C
7.3
Set alarm melody
There are three alarm ringtones.
1 Press m and scroll d to CLOCK/ALARM.
Press m.
2 Scroll d to ALARM TONE and press m.
Melodies are played.
3 Scroll u or d and press m.
Using your Twist 408
19
7893 – Philips Twist 408 – 07 – 16.03.07
8
Personal settings
8.1
Handset tones
1
2
3
w Warning
Press m, scroll d to PERSONAL SET and
press m.
HANDSET TONE is displayed. Press m and
scroll d to GROUP MELODY. Press m.
Scroll u or d to select: GROUP A, B or
C, then press m.
Press u or d to select the ringtone
you want for the group and press m.
Press e to return to standby.
When the phone is ringing, avoid holding the
earpiece too close to your ear as it may damage
your hearing.
4
8.1.1 Ring volume
Choose from: Ringer Off, Low, Medium, High,
Boost and Progressive (increasing ring volume).
n Note
The default setting is Medium.
1 Press m, scroll d to PERSONAL SET and
press m.
2 HANDSET TONE is displayed. Press m.
3 RING VOLUME is displayed. Press m.
4 Scroll u or d to adjust the ringer
volume level.
5 Press m to save the settings.
6 Press e to return to standby.
8.1.4 Key tones on/off
When you press a key on the handset you hear
a beep.You can switch these beeps on or off.
1 Press m, scroll d to PERSONAL SET and
press m.
2 HANDSET TONE is displayed. Press m and
scroll d to KEY TONE. Press m.
3 Scroll u or d to select ON or OFF.
4 Press m to confirm.
5 Press e to return to standby.
8.1.2 Ring melody
Choose from 10 ringer melodies.
1 Press m, scroll d to PERSONAL SET and
press m.
2 HANDSET TONE is displayed. Press m and
scroll d to RING MELODY. Press m.
3 Press u or d to select the ringtone.
A sample of the ringtone is played.
4 Press m to confirm.
5 Press e to return to standby.
8.1.3 Group melody
To benefit from this feature, you must subscribe
to the Caller Line ldentification service.This
menu enables you to select and set the melodies
to be played when there is an external incoming
call from a contact whose name is stored in
your phonebook and is part of a group.You can
associate 1 ring melody to each group.There
are three phonebook groups (Group A, B, C)
available for you to organize your contacts. Each
group can be assigned a unique melody.
20
5
8.1.5 First ring
Your Twist 408 will automatically detect the
Caller identification (Subscription dependent).
Your phone will not ring until this information is
displayed. If you wish to hear the ring before the
caller identification is displayed you can manually
set FIRST RING to ON.
1 Press m, scroll d to PERSONAL SET and
press m.
2 HANDSET TONE is displayed. Press m and
scroll d to FIRST RING. Press m.
3 Scroll u or d to select ON or OFF.
4 Press m to confirm.
5 Press e to return to standby.
8.2
Handset name
Personalise your handset, with a name or
location for example Lisa or Bedroom. Maximum
10 characters.
1 Press m, scroll d to PERSONAL SET and
press m.
2 Scroll d to HANDSET NAME and press m.
The current name is displayed.
3 Press > to delete the current name.
Personal settings
7893 – Philips Twist 408 – 07 – 16.03.07
4
5
Enter the name you want – maximum 10
characters and press m to save.
Press e to return to standby.
8.3
Auto pick up
With Auto pick up switched on, you can answer
a call just by lifting the handset off the base or
charger. If switched off, you will have to press
r to answer a call. The default setting is Off.
1 Press m, scroll d to PERSONAL SET and
press m.
2 Scroll d to AUTO PICK UP. Press m.
3 Scroll u or d to select ON or OFF.
4 Press m to confirm.
5 Press e to return to standby.
8.4
Auto hang up
With Auto hang up switched on, you can end a
call just by replacing the handset on the base or
charger. If switched off, you have to press e to
hang up. The default setting is On.
1 Press m, scroll d to PERSONAL SET and
press m.
2 Scroll d to AUTO HANG UP. Press m.
3 Scroll u or d to select ON or OFF.
4 Press m to confirm.
5 Press e to return to standby.
8.5
Display language
You can change the display language.
1 Press m, scroll d to PERSONAL SET and
press m.
2 Scroll d to LANGUAGE. Press m.
3 Scroll u or d to select the language
you want.
4 Press m to confirm.
5 Press e to return to standby.
When switched On, you can leave this handset
in the room you wish to monitor. Only the
microphone is on. Anyone in the room cannot
hear you.
8.7
Babysit
Switch a handset’s babysit mode setting On
and place that handset in the room.
2 At a second handset, press c and enter
the number of the handset you are using as
a room monitor.You can now hear sounds
coming from the room.
t Tip
To stop room monitoring at any time, press e
1
8.8
1
2
3
4
Backlight on/off
Press m, scroll d to PERSONAL SET and
press m.
Scroll d to BACKLIGHT. Press m.
Press u or d to select ON or OFF.
Press m to confirm.
8.9
Keypad lock
Prevent accidental dialling while carrying the
handset by locking the keypad.
1 Press and hold *.
The display shows KEYS LOCKED.
2 To unlock the handset, press and hold *
again.
n Note
While the keypad is locked, you can answer
incoming calls as normal.
8.6
Babysit mode on/off
Leave one handset in a room and use another
handset to hear sounds in that room.
1 Press m, scroll d to PERSONAL SET and
press m.
2 Scroll d to BABYSIT MODE. Press m.
3 Press u or d to select ON or OFF.
4 Press m to confirm.
Personal settings
21
7893 – Philips Twist 408 – 07 – 16.03.07
9
Advanced settings
This setting is useful to access certain network
and PABX/switchboard services.
9.1
Recall time
The default Twist 408 recall time is suitable for
your country and network operator. It is unlikely
that you should need to change this setting
unless advised to do so.
1 Press m, scroll d to ADVANCED SET and
press m.
2 RECALL TIME is displayed. Press m.
3 Press u or d to select the setting you
want: SHORT, MEDIUM, LONG.
4 Press m to confirm.
5 Press e to return to standby.
9.2
Call barring
Prevent certain numbers from being dialled
from your Twist 408. Store up to four specific
numbers, each up to 4 digits – for example,
international or local prefixes.
Bypass call barring by switching the setting Off
or On.
n Note
If you switch Call barring on, BARR MODE ON will
be displayed on your screen in standby mode.
9.2.1 Switch call barring on/off
Press m, scroll d to ADVANCED SET and
press m.
2 Scroll d to CALL BARRING. Press m.
3 Enter the master PIN (default setting 0000)
and press m.
4 MODE is displayed. Press m.
5 Press u or d to select ON or OFF.
Press m to confirm.
6 Press e to return to standby.You can now
set the number (See below).
1
22
9.2.2 Set a number to be barred
1 Press m, scroll d to ADVANCED SET and
press m.
2 Scroll d to CALL BARRING. Press m.
3 Enter the master PIN (default setting 0000)
and press m.
4 Scroll d to NUMBER. Press m.
5 If necessary, scroll u or d to the next
available slot.
6 Press m and enter the number or prefix
you want to bar. Press m to confirm.
7 Press e to return to standby.
9.3
Baby call
When activated, this feature allows you to dial
a number by pressing any key on your handset
(except e).
9.3.1 Switch baby call on/off
1 Press m, scroll d to ADVANCED SET and
press m.
2 Scroll d to BABY CALL. Press m.
3 Enter the master PIN (default setting 0000)
and press m.
4 MODE is displayed. Press m then press u
or d to select ON or OFF. Press m
to confirm.
5 Press e to return to standby.
n Note
If you switch Baby call on, BABY CALL ON will be
displayed on your screen in standby mode.
To switch Baby call off again:
1 Press e.
2 OFF? is displayed. Press m to confirm.
9.3.2 Set the baby call number
1 Press m, scroll d to ADVANCED SET and
press m.
2 Scroll d to BABY CALL. Press m.
3 Enter the master PIN (Default setting 0000)
and press menu.
4 Scroll d to NUMBER. Press m.
5 Enter the number. Press m to confirm
6 Press e to return to standby.
Advanced settings
7893 – Philips Twist 408 – 07 – 16.03.07
9.3.3 Dial a baby number
1 When a baby call number has been stored
and the baby call setting switched on, press
any key (apart from e), to dial a number.
n Note
When baby call is switched on, you can still
answer any incoming call as normal.
9.4
Registration
Up to 5 handsets can be registered to one base
station. Additional handsets must be registered
to the base before you can use them.
• The instructions described below apply
specifically to your Twist 408 handset.
If you wish to register another manufacturer’s
handset, the instructions may vary. In this
case, please refer to the manufacturer of the
additional handset.
• The Master PIN is required before you can
register or unregister handsets. The default
PIN is 0000.
9.5
Register a handset
At the base:
1 Press and hold the p button on the
base station for at least 3 seconds.You have 90
seconds in which to register a handset.
At the handset:
1 Press m and scroll d to
ADVANCED SET and press m.
2 Scroll d to REGISTRATION and press m.
3 If necessary, scroll u or d to display
REGIST. BASE and press m.
BASE 1 2 3 4 is displayed and the registered
base number is flashing.
Enter the number of the base on which you
wish to register your handset.
4 When the display shows PIN----, enter the
base PIN.
When the handset registers with the base, it is
assigned a handset number.
Advanced settings
9.6
Select a base
You can register your Twist 408 handset with
up to 4 bases. Once registered, you can switch
between bases, for example, bases at home and
at work.
1 Press m and scroll d to ADVANCED SET
and press m.
2 Scroll d to REGISTRATION and press m.
3 SELECT BASE is displayed. Press m.
The available bases are displayed with the
current base number flashing.
4 Enter the number of the base you want
– 1,2,3 or 4 and press m.
When the base is found you hear a beep. If not
found, the display shows UNREGISTERED.
9.7
1
2
3
4
Unregister a handset
Press m and scroll d to ADVANCED SET
and press m.
Scroll d to UNREGISTER and press m.
Enter the 4 digit master PIN and press m.
Display shows the registered handset numbers.
Scroll u or d to select the handset
you want to delete and press m.
UNREGISTERED is displayed on the handset
screen.
9.8
PIN
The 4-digit master PIN is used when registering or
unregistering a handset and when changing some
settings on your Twist 408.The default setting is
0000.You can change this PIN for more security.
1 Press m, scroll d to ADVANCED SET and
press m.
2 Scroll d to PIN. Press m.
3 Enter the current 4 digit master PIN and
press m. (Default setting 0000).
4 Enter the new PIN and press m.
n Note
Make a note of your PIN. If you forget your PIN
you will need to reset your product.
23
7893 – Philips Twist 408 – 07 – 16.03.07
9.9
Reset
This will reset your Twist 408 to its default settings.
n Note
Entries stored in the phonebook are retained.
1 Press m, scroll d to ADVANCED SET and
press m.
2 Scroll d to RESET UNIT. Press m.
3 CONFIRM? is displayed. Press m.
9.10
Default settings
Handset name
Key tone
Auto pick up
Auto hang up
Ringer melody
Ringer volume
Earpiece volume
Phonebook
Call log
Redial list
Master PIN
Keypad lock
Clock
Alarm
BELGACOM
On
Off
On
Ring 1
Medium
3
Unchanged
Empty
Empty
0000
Off
00:00
Off
9.11
Intrusion
When an external call is taking place, another
handset registered to the base can join in,
making the call a 3-way conference, just by
pressing r.
To enable this, Intrusion must be switched On.
1 Press m, scroll d to ADVANCED SET and
press m.
2 Scroll d to INTRUSION. Press m.
3 Scroll u or d to ON or OFF.
4 Press m to confirm.
24
Advanced settings
7893 – Philips Twist 408 – 07 – 16.03.07
10
Network Services
Your Twist 408 gives you easy access to a range
of Belgacom services.
10.1
Call forward for all calls
Set your phone to forward all incoming calls to
another number.
10.1.1 Set call forward number
1 Press m and scroll d to NET. SERVICE
and press m.
2 CALL FORWARD is displayed. Press m.
3 Scroll u or d to SETTINGS to set the
number you wish to transfer the calls to and
press m.
4 Press e to return to standby.
10.1.2 Activate/Deactivate call forward
for all calls
1 Press m and scroll d to NET. SERVICE
and press m.
2 CALL FORWARD is displayed. Press m.
3 Scroll u or d to ACTIVATED or
DEACTIVATED and press m.
4 Press e to return to standby.
10.2
Call forward when busy
Set your phone to forward incoming calls to
another number only if your line is busy.
10.2.1 Set call forward number
1 Press m and scroll d to NET. SERVICE
and press m.
2 Scroll d to CALL FWDBUSY and press m.
3 Scroll u or d to SETTINGS to set the
number you wish to transfer the calls to and
press m.
4 Press e to return to standby.
Network Services
10.2.2 Activate/Deactivate call forward
when busy
1 Press m and scroll d to NET. SERVICE
and press m.
2 Scroll d to CALL FWDBUSY and press m.
3 Scroll u or d to ACTIVATED or
DEACTIVATED and press m.
4 Press e to return to standby.
10.3
Call forward when unanswered
Set your phone to forward incoming calls to
another number only if your line does not
answer.
10.3.1 Set call forward number
Press m and scroll d to NET. SERVICE
and press m.
2 Scroll d to CALL FWUNANS and press m.
3 Scroll u or d to SETTINGS to set the
number you wish to transfer the calls to and
press m.
4 Press e to return to standby.
1
10.3.2 Activate/Deactivate call forward
when unanswered
1 Press m and scroll d to NET. SERVICE
and press m.
2 Scroll d to CALL FWUNANS and press m.
3 Scroll u or d to ACTIVATED or
DEACTIVATED and press m.
4 Press e to return to standby.
10.4
PhoneMail
Switch your PhoneMail service on or off.
1 Press m and scroll d to NET. SERVICE
and press m.
2 Scroll d to PHONEMAIL and press m.
3 Scroll u or d to CALL and press m
to call the PhoneMail number, or scroll to
SETTINGS to set a PhoneMail number and
press m.
4 Press e to return to standby.
25
7893 – Philips Twist 408 – 07 – 16.03.07
10.5
Ringback
To find out who called you last.
1 Press m and scroll d to NET. SERVICE
and press m.
2 Scroll d to RINGBACK and press m.
3 Scroll u or d to CALL and press m
to call the number or scroll to SETTINGS to
set a ringback number and press m.
4 Press e to return to standby.
10.6
Cancel Ringback
Dials the service number for your country to
deactivate the ringback service.
1 Press m and scroll d to NET. SERVICE
and press m.
2 Scroll d to CANCEL RB and press m.
3 Scroll u or d to CALL and press m to
dial the service number that will deactivate
the ringback service, or scroll to SETTINGS
to set or modify the cancel ringback service
number and press m.
4 Press e to return to standby.
26
Network Services
7893 – Philips Twist 408 – 07 – 16.03.07
11
Maintenance and
replacement
3
Place the new batteries in the handset.
4
Replace the battery cover.
11.1
Cleaning
• Simply clean the handset and base with a
damp (not wet) cloth, or an anti-static wipe.
• Never use household polish as this will
damage the product.
• Never use a dry cloth as this may cause a
static shock.
11.2
How to replace the batteries
w Warning
Always use AAA rechargeable batteries.
1 Slide off the battery cover.
2
Remove the old batteries.
Maintenance and replacement
27
7893 – Philips Twist 408 – 07 – 16.03.07
12
Technical data
Battery life and range
When the battery is fully charged, the talk time
of your Twist 408 is approximately 12 hours and
the stand-by time is approximately 150 hours.
Low battery warning
The battery level is shown in the top left of the
handset display.
When the battery level becomes low, you hear
a beep once every minute (during a call) and
the e icon flashes. If the battery level becomes
exceedingly low, the phone automatically
switches off shortly after the alert.
The approximate power levels of your battery
are:
f Fully charged.
g Partially charged.
e Running low.
Battery type
The batteries that are used on your Twist 408
are AAA NiMh 550mAh.
Out of range warning
In ideal conditions the range of the phone is up
to 50 metres indoors and 300 metres outdoors.
When you are getting close to being out of
range during a call, the handset gives a
warning beep.
If the handset moves outside this range, the
handset gives and error beep, the call is lost and
some other functions will not be available.
28
Technical data
7893 – Philips Twist 408 – 07 – 16.03.07
13
Frequently asked questions
Caller Line Identification (CLI) service
does not work
Check your subscription with Belgacom
Charging
Phonebook
The f icon is not blinking when the
handset is placed on the base
• Bad battery contact – move the handset
slightly
• Dirty contact – Clean the battery contact
with a cloth moistened with alcohol
• Battery is full – no need to charge
A phonebook entry cannot be stored
The phonebook is full. Delete an entry to free
memory
Calls
No dialling tone
• No power – check the connections. Reset the
phone: unplug and plug back in the mains
• Batteries are empty – charge the batteries for
at least 24 hours
• You are too far from the base – move closer
to the base
• Wrong line cable – use the line cable provided
• Line adaptor (when needed) is not connected
to the line cord – connect the line adaptor
(when needed) to the line cord
Poor audio quality
The base is too close to electrical appliances,
reinforced concrete walls or metal doorframes
– move the base at least one metre away from
any electrical appliances
Display
No display
• Try recharging or replacing the batteries.
• Try disconnecting and connecting the base
power supply.
Registration
Unable to register another handset
Maximum number of 5 handsets has been
reached.
The display shows SEARCHING.You must
unregister a handset in order to register a new
one.
Interference
Noise interference on your radio or
television
Your base or charger may be too close. Move it
as far away as possible.
N
The
icon is blinking
• Handset is not registered to the base
– register the handset to the base
• You are too far from the base – move closer
to the base
No ring tone
The ring tone is deactivated.
Increase the volume.
Frequently asked questions
29
7893 – Philips Twist 408 – 07 – 16.03.07
DECLARATION OF CONFORMITY
We,
PCE
9, rue Maurice Trintignant
72081 Le Mans Cedex 9
France
Declare that the products TwistTM408 are in compliance with ANNEX IV of the R&TTE-Directive
1999/5/EC and then with the following essential requirements :
Article 3.1 a : (protection of the health & the safety of the user)
Safety : EN 60950-1 (2001) / A11 (2004)
Article 3.1 b : (protection requirements with respect to electromagnetic compatibility)
EMC : ETSI EN 301 489-6 V1.2.1 (2002) & ETSI EN 301 489-1 V1.6.1 (2005)
Article 3.2 : (effective use of the radio spectrum)
Radio : EN 301 406 V1.5.1 (2003)
The presumption of conformity with the essential requirements regarding Council Directive 1999/5/EC
is ensured.
Date : 05/04/2007 Le Mans
Product Quality Manager
Home Communication
30
7893 – Philips Twist 408 – 07 – 16.03.07
Guarantee terms
The Equipment you have bought has been carefully selected by Belgacom and is covered by a twoyear warranty on spare parts and labor in the event of any material or manufacturing defect, unless
otherwise specified. The warranty shall be valid from the date on which the equipment is collected
or delivered.
If you have any problems with the equipment, you should take it to a Teleboutique or to one of our
authorized agents, in its entirety and in its original packaging, or in packaging providing the same
degree of protection, together with the original receipt. The addresses for our Teleboutiques and
authorized agents are given in the Information Section of the White Pages.
Your equipment will be repaired or replaced free of charge, on presentation of the receipt, in the
event of any material or manufacturing defect.
Belgacom alone shall determine what repairs and/or replacements are necessary.
The warranty on the repaired or replaced equipment shall end on the date on which the original
warranty on the purchased equipment expires, but shall not be less than 3 months.
The warranty shall not cover:
- damage of any kind that does not predate the sale;
- any damage, faults or defects attributable to the Customer or to causes unrelated to the
Equipment: lightning, power surges, humidity, accidental damage, improper use or poor maintenance,
failure to comply with the instructions in the user manual, and force majeure;
- the repair or replacement of movable parts (cords, wires, plugs, aerials, etc.), consumables (cells,
batteries, paper, ink, etc.) needing regular replacement and the supply of cleaning products.
The warranty shall not apply:
- to any changes or repairs to the terminal Equipment undertaken by the Customer himself/herself
or through the services of persons not designated by Belgacom;
- if the Customer removes or tampers with the manufacturer’s serial numbers and/or brand names
on the terminal Equipment.
Belgacom shall not be liable for any indirect or immaterial loss sustained by the Customer as a
result of the malfunctioning of the terminal Equipment, such as any loss of production, revenue or
contracts.
The General Terms and Conditions for the Sale of Terminal Equipment can be obtained on request
from any Belgacom service available to the public or at www.belgacom.be
Belgacom SA under public law,
Bd. du Roi Albert II 27, B-1030 Brussels VAT BE 0202.239.951, Brussels Register of Legal Entities
31
7893 – Philips Twist 408 – 07 – 16.03.07
14
Index
A
Access the redial list 18
Add entry to phonebook 14
Adjust earpiece volume 12
Alarm clock 19
Answer a call 12
Auto hang up 21
Auto pick up 21
B
Babysitter call 22
Base station overview 9
Box contents 6
C
E
Earpiece volume 12
Edit a phonebook entry 15
End a call 12
Enter a name in the phonebook 14
F
First ring 20
H
Handset keys 7
Handset name 20
Handset overview 7
Handset registration 23
I
Identify your caller 17
Install batteries 11
Call barring 22
Call from the phonebook 12
Call a number from the call log 12
Call another handset 13
Call PhoneMail 13
Caller identification 17
Change handset ringtone 20
Change one touch phone numbers 16
Change ringer volume 20
Change master PIN 24
Charge batteries 11
Conference call 13
Connect the base 10
L
D
P
Default settings 24
Delete a call log entry 18
Delete a one touch number 16
Delete a phonebook entry 15
Delete all phonebook entries 15
Delete an entry in the call log 18
Delete a redial list number 18
Display icons and symbols 8
32
Lock the keypad 21
M
Make a call 12
Menu navigation 9
Master reset 24
N
Navigate the menu 9
O
One touch keys 15
Page a handset 9
Pause in a stored number 15
Pre-dial a call 12
Put a caller on hold to answer a second caller 13
R
Recall time 22
Recycle your phone 5
Register a handset to a base 23
Reset 24
Index
7893 – Philips Twist 408 – 07 – 16.03.07
S
Safety information 4
Save a call log number to the phonebook 17
Save a redial number to the phonebook 18
Secrecy 13
Set alarm 19
Set date and time 19
Set alarm melody 19
Set display language 21
Set handset melody 20
Set first ring 20
Set recall (flash) mode 22
Store a one touch number 16
Switch between internal and external calls 13
Switch handset on/off 13
Switch key beeps on/off 20
T
Transfer an external call to another handset 13
U
Unregister a handset 23
V
View phonebook entries 15
View a call log 17
Index
33
7893 – Philips Twist 408 – 07 – 16.03.07
Copyright © 2007 Koninklijke Philips Electronics N.V. All rights reserved.
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
Specifications are subject to change without notice.
Document order number: xxxx xxx xxxxx (XX)
Printed in P.R.C.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising