Asus | M4A79 DELUXE - Motherboard - ATX | Specifications | Asus M4A79 DELUXE - Motherboard - ATX Specifications

Asus M4A79 DELUXE - Motherboard - ATX Specifications
Motherboard
M4A79
Deluxe
E4418
Second Edition (V2)
December 2008
Copyright © 2008 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
ii
Contents
Contents....................................................................................................................... iii
Notices....................................................................................................................... vii
Safety information..................................................................................................... viii
About this guide.......................................................................................................... ix
M4A79 Deluxe specifications summary.................................................................... xi
Chapter 1:
1.1
1.2
1.3
Package contents....................................................................................... 1-1
Special features.......................................................................................... 1-2
1.3.1
Product highlights........................................................................ 1-2
1.3.3
ASUS intelligent performance and overclocking features............ 1-5
1.3.2
Chapter 2:
2.1
2.2
2.4
2.2.1
Motherboard layout...................................................................... 2-2
2.2.3
Placement direction..................................................................... 2-4
2.2.4
2.3.1
2.3.2
2.8
Screw holes................................................................................. 2-4
Installing the CPU........................................................................ 2-5
Installing the CPU heatsink and fan............................................. 2-7
System memory........................................................................................ 2-10
2.4.1
Overview.................................................................................... 2-10
2.4.3
Installing a DIMM....................................................................... 2-16
2.4.4
Memory configurations............................................................... 2-11
Removing a DIMM..................................................................... 2-16
Expansion slots........................................................................................ 2-17
2.5.1
Installing an expansion card...................................................... 2-17
2.5.3
Interrupt assignments................................................................ 2-18
2.5.4
2.7
Layout contents............................................................................ 2-3
Central Processing Unit (CPU).................................................................. 2-5
2.5.2
2.6
Hardware information
Motherboard overview................................................................................ 2-2
2.4.2
2.5
ASUS unique features................................................................. 1-3
Before you proceed.................................................................................... 2-1
2.2.2
2.3
Product introduction
Welcome!..................................................................................................... 1-1
2.5.5
Configuring an expansion card.................................................. 2-17
PCI slots..................................................................................... 2-19
Four PCI Express 2.0 x16 slots................................................. 2-19
Jumpers..................................................................................................... 2-21
Onboard switches..................................................................................... 2-23
Connectors................................................................................................ 2-24
2.8.1
Rear panel connectors............................................................... 2-24
iii
Contents
2.8.2
2.9
2.10
2.8.3
Starting up for the first time..................................................................... 2-39
Turning off the computer.......................................................................... 2-39
Chapter 3:
3.1
3.2
Updating BIOS............................................................................................. 3-1
3.2.1
ASUS Update utility..................................................................... 3-2
3.2.3
ASUS EZ Flash 2 utility................................................................ 3-5
3.2.4
BIOS menu screen....................................................................... 3-7
3.3.3
Navigation keys............................................................................ 3-8
3.3.5
3.3.6
3.3.7
3.3.8
3.3.9
Menu bar...................................................................................... 3-7
Menu items.................................................................................. 3-8
Submenu items............................................................................ 3-8
Configuration fields...................................................................... 3-8
Pop-up window............................................................................ 3-8
Scroll bar...................................................................................... 3-8
General help................................................................................ 3-8
Main menu................................................................................................... 3-9
3.4.1
3.4.2
3.4.3
Primary IDE Master/Slave; SATA 1-5; ESATA.............................. 3-9
Storage Configuration................................................................ 3-11
System Information.................................................................... 3-12
Ai Tweaker menu....................................................................................... 3-12
3.5.1
AI Overclocking Tuner [Auto]..................................................... 3-12
3.5.3
FSB Frequency [XXX]................................................................ 3-13
3.5.2
3.5.4
CPU Ratio [Auto]........................................................................ 3-13
PCIE Frequency [XXX].............................................................. 3-13
3.5.5
DRAM Frequency Control [Auto]............................................... 3-13
3.5.8
Memory Configuration................................................................ 3-14
3.5.6
3.5.7
3.5.9
3.5.10
3.5.11
3.5.12
iv
ASUS CrashFree BIOS 2 utility................................................... 3-6
3.3.1
3.3.4
3.5
Creating a bootable floppy disk.................................................... 3-4
BIOS setup program................................................................................... 3-7
3.3.2
3.4
BIOS setup
Knowing BIOS............................................................................................. 3-1
3.2.2
3.3
Audio I/O connections................................................................ 2-25
Internal connectors.................................................................... 2-28
CPU/NB Frequency [Auto]......................................................... 3-13
HT Link Speed [Auto]................................................................. 3-14
DRAM Timing Configuration...................................................... 3-15
CPU Voltage [Auto].................................................................... 3-16
CPU/NB Voltage [Auto].............................................................. 3-16
CPU VDDA Voltage [Auto]......................................................... 3-16
Contents
3.5.13
HT Voltage [Auto]....................................................................... 3-16
3.5.16
NB 1.8V Voltage [Auto].............................................................. 3-16
3.5.15
3.5.17
3.5.18
3.5.19
3.6
3.5.20
3.6.5
USB Configuration..................................................................... 3-23
PCIPnP...................................................................................... 3-24
3.7.1
Suspend Mode [Auto]................................................................ 3-25
3.7.3
ACPI 2.0 Support [Disabled]...................................................... 3-25
3.7.6
Repost Video on S3 Resume [No]............................................. 3-25
ACPI APIC Support [Enabled].................................................... 3-25
APM Configuration..................................................................... 3-26
Hardware Monitor...................................................................... 3-27
Boot menu................................................................................................. 3-28
3.8.1
Boot Device Priority................................................................... 3-28
3.8.3
Security...................................................................................... 3-30
Boot Settings Configuration....................................................... 3-29
Tools menu................................................................................................ 3-32
3.9.1
ASUS EZ Flash 2....................................................................... 3-32
3.9.3
ASUS O.C. Profile...................................................................... 3-34
3.9.2
3.9.4
Express Gate............................................................................. 3-33
AI NET 2..................................................................................... 3-35
Exit menu................................................................................................... 3-36
Chapter 4:
4.3
Chipset....................................................................................... 3-20
Power menu............................................................................................... 3-25
3.8.2
4.2
AI Clock Skew for Channel A/B [Auto]....................................... 3-17
Onboard Devices Configuration................................................. 3-22
3.7.5
4.1
PCIE Spread Spectrum [Enabled]............................................. 3-17
3.6.3
3.7.4
3.10
CPU Spread Spectrum [Enabled].............................................. 3-17
CPU Configuration..................................................................... 3-19
3.7.2
3.9
SB Voltage [Auto]....................................................................... 3-16
3.6.1
3.6.4
3.8
NB Voltage [Auto]....................................................................... 3-16
Advanced menu........................................................................................ 3-18
3.6.2
3.7
DRAM Voltage [Auto]................................................................. 3-16
3.5.14
Software support
Installing an operating system.................................................................. 4-1
Support DVD information........................................................................... 4-1
4.2.1
4.2.2
Running the support DVD............................................................ 4-1
Obtaining the software manuals.................................................. 4-2
Software information.................................................................................. 4-3
4.3.1
Cool ‘n’ Quiet!™ Technology........................................................ 4-3
Contents
4.3.2
4.3.3
ASUS PC Probe II........................................................................ 4-5
4.3.5 ASUS AI Suite.............................................................................. 4-7
4.3.4
4.3.6
4.3.7
4.3.8
4.3.9
4.4
4.3.10
ASUS TurboV............................................................................. 4-11
ASUS Turbo Key........................................................................ 4-12
AMD® RAID configurations......................................................... 4-14
Installing Serial ATA hard disks.................................................. 4-14
Creating a RAID driver disk..................................................................... 4-20
4.5.1
Creating a RAID driver disk without entering the OS................. 4-20
Creating a RAID/SATA driver disk in Windows®. ....................... 4-20
ATI® CrossFireX™ technology support
ATI CrossFireX™ technology................................................................... 5-1
®
5.1.1
5.1.2
Requirements............................................................................... 5-1
Before you begin.......................................................................... 5-1
Installing CrossFireX™ graphics cards.................................................... 5-2
5.2.1
Dual CrossFireX installation......................................................... 5-2
5.2.3
Quad CrossFireX installation....................................................... 5-4
Triple CrossFireX installation....................................................... 5-3
Software information.................................................................................. 5-5
5.3.1
5.3.2
vi
ASUS AI Nap............................................................................. 4-10
4.4.3
5.2.2
5.3
ASUS Q-Fan 2............................................................................. 4-9
RAID definitions......................................................................... 4-13
Chapter 5:
5.2
ASUS EPU................................................................................... 4-8
4.4.1
4.5.2
5.1
ASUS Express Gate SSD / ASUS Express Gate......................... 4-6
RAID configurations................................................................................. 4-13
4.4.2
4.5
Audio configurations.................................................................... 4-4
Installing the device drivers.......................................................... 5-5
Enabling the ATI® CrossFireX™ technology................................ 5-5
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•
•
Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
This class B digital apparatus complies with Canadian ICES-003.
vii
Safety information
Electrical safety
•
•
•
•
•
•
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
Make sure that your power supply is set to the correct voltage in your area. If you are
not sure about the voltage of the electrical outlet you are using, contact your local power
company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
•
•
•
•
•
•
Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
Before using the product, make sure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.
viii
About this guide
This user guide contains the information you need when installing and configuring the
motherboard.
How this guide is organized
This guide contains the following parts:
•
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it
supports.
•
Chapter 2: Hardware information
•
Chapter 3: BIOS setup
•
Chapter 4: Software support
•
Chapter 5: ATI® CrossFireX™ support
This chapter lists the hardware setup procedures that you have to perform when
installing system components. It includes description of the switches, jumpers, and
connectors on the motherboard.
This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.
This chapter describes the contents of the support DVD that comes with the
motherboard package and the software.
This chapter describes the ATI® CrossFireX™ feature and shows the graphics card
installation procedures.
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1.
2.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.
ix
Conventions used in this guide
To make sure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text
Indicates a menu or an item to select.
Italics
Used to emphasize a word or a phrase.
<Key>
Keys enclosed in the less-than and greater-than sign means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or Return key.
<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key names are linked with a plus sign (+).
Command
Example: <Ctrl> + <Alt> + <Del>
Means that you must type the command exactly as shown, then supply the required item or value enclosed in brackets.
Example: At the DOS prompt, type the command line:
afudos /iM4A79D.ROM
M4A79 Deluxe specifications summary
CPU
Phenom™ X4 / Phenom™ X3 / Athlon™ X2 / Athlon™ /
Sempron™ processors (socket AM2+/AM2)
Compatible with Phenom™ II / Athlon™ X4 / Athlon™ X3 /
Athlon™ X2 (AM3 CPU)
Supports 45nm CPU
AMD® Cool ‘n’ Quiet™ Technology
Chipset
AMD® 790FX / SB750
System bus
Up to 5200 MT/s; HyperTransport™ 3.0 interface for
AM3 / AM2+ CPU
2000 / 1600 MT/s for AM2 CPU
Memory
4 x DIMM, max. 16 GB, DDR2 1066* / 800 / 667 MHz,
ECC / non-ECC, un-buffered memory
Dual-channel memory architecture
* Due to AMD® CPU limitation, DDR2 1066 MHz is supported
by AM2+ / AM3 CPU for one DIMM per channel only. Refer to
www.asus.com for the memory QVL (Qualified Vendors Lists).
** Due to OS limitation, when installing total memory of 4 GB
capacity or more, Windows® 32-bit operation system may only
recognize less than 3 GB. Hence, a total installed memory of
less than 3 GB is recommended.
Expansion slots
4 x PCI Express 2.0 x16 slots, support ATI® CrossFireX™ technology
(@ dual x16, triple x16 / x8 / x8, or quad x8 link)
2 x PCI 2.2 slots
Storage
SB750 chipset:
- 1 x Ultra DMA 133 / 100 / 66 for up to 2 PATA devices
- 5 x SATA 3.0 Gb/s ports with RAID 0, 1, 5 ,10 and JBOD support
-1 x External SATA 3.0 Gb/s port
LAN
Realtek® 8112 Gigabit LAN controller featuring AI NET 2
Audio
Realtek® ALC1200 8-channel High Definition Audio CODEC
- Supports Jack-Detection, Multi-Streaming, and Front Panel Jack-Retasking
- Coaxial / Optical S/PDIF Out ports at back I/O
- ASUS Noise Filtering
IEEE 1394
VIA® VT6315N controller supports 2 x IEEE 1394a ports (one at midboard; one at back panel)
USB
12 x USB 2.0/1.1 ports (6 ports at midboard; 6 ports at back panel)
(continued on the next page)
xi
M4A79 Deluxe specifications summary
ASUS unique features
ASUS Power Solutions:
- 8+2 Phase Power Design
- ASUS Anti-Surge Protection
ASUS Green Design:
- EPU
- ASUS AI Nap
Express Gate
ASUS Quiet Thermal Solutions:
- ASUS Fanless Design: Heat pipe solution
- ASUS Fanless Design: Stack Cool 2
- ASUS Q-Fan 2
ASUS EZ DIY
- ASUS Q-Shield
- ASUS Q-Connector
- ASUS O.C. Profile
- ASUS CrashFree BIOS 2
- ASUS EZ Flash 2
- Onboard Switch
Special features
100% High-quality Japan-made conductive polymer capacitors
(5000hrs VRM, over 57 years operation lifespan at 65ºC)
ASUS MyLogo 2™
AMD® OverDrive (AOD) support*
* Advanced cooling system is required when advanced
overclocking functions of AMD® OverDrive are enabled.
ASUS exclusive
overclocking features
Intelligent overclocking tools:
- AI Overclocking (intelligent CPU frequency tuner)
- TurboV
- Turbo Key
Precision Tweaker 2:
- vCore: Adjustable CPU voltage at 0.0125V increment
- vChipset (N.B.): 16-step chipset voltage control
- vDIMM: 36-step DRAM voltage control
SFS (Stepless Frequency Selection):
- FSB tuning from 200 MHz up to 600 MHz at 1 MHz increment
- PCI Express frequency tuning from 100 MHz to
150 MHz at 1 MHz increment
Overclocking protection:
- ASUS C.P.R. (CPU Parameter Recall)
(continued on the next page)
xii
M4A79 Deluxe specifications summary
Back panel I/O ports
1 x PS/2 keyboard port (purple)
1 x PS/2 mouse port (green)
1 x S/PDIF Out port (coaxial)
1 x S/PDIF Out port (optical)
1 x External SATA port
1 x IEEE 1394a port
1 x LAN (RJ-45) port
6 x USB 2.0/1.1 ports
8-channel Audio I/O ports
Internal I/O connectors
3 x USB connectors support additional 6 USB ports
1 x Floppy disk drive connector
1 x IDE connector
1 x COM connector
5 x SATA connectors
1 x CPU Fan connector
2 x Chassis Fan connectors
1 x Power Fan connector
1 x IEEE1394a connector
Front panel audio connector
1 x S/PDIF Out header
Chassis Intrusion connector
CD audio in
24-pin ATX Power connector
System Panel (Q-Connector)
8-pin ATX 12V Power connector
1 x Power on switch
1 x Reset switch
BIOS features
8 Mb Flash ROM, AMI BIOS, PnP, DMI 2.0, SM BIOS 2.5, ACPI 2.0a, ASUS EZ Flash 2, ASUS CrashFree BIOS 2
Manageability
WOL by PME, WOR by PME, WOR by Ring, PXE,
Chassis Intrusion
Support DVD contents
Drivers
Express Gate
ASUS PC Probe II
ASUS Update
ASUS AI Suite
AMD OverDrive (AOD) utility
Anti-virus software (OEM version)
Form factor
ATX form factor: 12 in x 9.6 in (30.5 cm x 24.4 cm)
*Specifications are subject to change without notice.
xiii
xiv
Chapter 1
1.1
Product introduction
Welcome!
Thank you for buying an ASUS® M4A79 Deluxe motherboard!
The motherboard delivers a host of new features and latest technologies, making it another
standout in the long line of ASUS quality motherboards!
Chapter 1
Chapter 1:
Before you start installing the motherboard, and hardware devices on it, check the items in
your package with the list below.
1.2
Package contents
Check your motherboard package for the following items.
nual
User Ma
ASUS M4A79 Deluxe
motherboard
User guide
Support DVD
2 x ASUS CrossFire™
bridge cables
5 x Serial ATA signal cables
1 x Ultra DMA 133/
100/66 cable
1 x ASUS Q-Shield
1 x 2-port USB 2.0 and 1-port
IEEE 1394a module
1 x ASUS Q-Connector kit
•
If any of the above items is damaged or missing, contact your retailer.
•
The illustrated items above are for reference only. Actual product specifications may
vary with different models.
ASUS M4A79 Deluxe
1-1
1.3
Special features
1.3.1
Product highlights
Chapter 1
AMD® Phenom™ X4 / Phenom™ X3 / Athlon™ X2 / Athlon™ / Sempron™
processors (socket AM2+/AM2)
This motherboard supports AMD® Socket AM2+ multi-core processors. It features
dual-channel DDR2 1066 memory support, data transfer rate up to 5200MT/s via
HyperTransport™ 3.0 based system bus, and AMD® Cool ‘n’ Quiet™ Technology.
AMD® Phenom™ II / Athlon™ X4 / Athlon™ X3 / Athlon™ X2 (AM3 CPU)
This motherboard supports AMD® AM3 multi-core processors with unique L3 cache and
delivers better overclocking capabilities with less power consumption. It features dualchannel DDR2 1066 memory support and accelerates data transfer rate up to 5200MT/s via
HyperTransport™ 3.0 based system bus. This motherboard also supports AMD® CPUs in the
new 45nm manufacturing process.
AMD® 790FX Chipset
AMD 790FX Chipset is designed to support up to 5200MT/s HyperTransport™ 3.0 (HT 3.0)
interface speed and quad PCI Express™ 2.0 x16 graphics. It is optimized with AMD®’s
latest AM3 and multi-core CPUs to provide excellent system performance and overclocking
capabilities.
ATI® CrossFireX™ Technology
ATI’s CrossFireX™ boosts image quality along with rendering speed, eliminating the
need to scale down screen resolution to get high quality images. CrossFireX™ allows
higher antialiasing, anisotropic filtering, shading, and texture settings. Adjust your display
configurations, experiment with the advanced 3D settings, and check the effects with a realtime 3D-rendered previews within ATI Catalyst™ Control Center.
100% high-quality Japan-made conductive polymer capacitors
(5000hrs VRM, over 57 years operation lifespan at 65ºC)
This motherboard uses all high-quality conductive polymer capacitors for durability, improved
lifespan and enhanced thermal capacity.
Green ASUS
This motherboard and its packaging comply with the European Union’s Restriction on the
use of Hazardous Substances (RoHS). This is in line with the ASUS vision of creating
environment-friendly and recyclable products/packaging to safeguard consumers’ health
while minimizing the impact on the environment.
1-2
Chapter 1: Product Introduction
1.3.2
ASUS unique features
ASUS Power Solutions
Chapter 1
ASUS Power solutions intelligently and automatically provide balanced computing power and
energy consumption.
8+2 Phase Power Design
To fully unleash the next-generation AM3 CPU’s potential, the ASUS M4 Series
motherboards have adopted a brand new 8-phase VRM power design. It delivers high
power efficiency and supreme overclocking ability. Furthermore, high quality power
components can effectively lower system temperature to ensure longer component
lifespan. This series also features an extra 2 (or 1) phase power dedicated to integrated
memory/HT controller.
ASUS Anti-Surge Protection
This special design prevents expensive devices and the motherboard from damage
caused by power surges from switching power supply (PSU).
ASUS Green Design
This motherboard and its packaging comply with the European Union’s Restriction on the
use of Hazardous Substances (RoHS) to safeguard consumers’ health while minimizing the
impact of the environment.
ASUS EPU
The ASUS EPU (Energy Processing Unit) provides total system power management by
detecting current PC loadings and intelligently moderating power usage for critical PC
components in real-time–helping save power and money!
AI Nap
With AI Nap, the system can continue running at minimum power and noise when you
are temporarily away. To wake the system and return to the OS environment, simply
click the mouse or press a key.
Express Gate
Taking only 5 seconds to bootup, Express Gate is the one-stop gateway to instant fun! It’s a
unique motherboard built-in OS. You can utilize the most popular Instant Messengers (IM)
like MSN, Skype, Google talk, QQ, and Yahoo! Messenger to keep in touch with friends,
or quickly check on the weather and e-mails just before leaving your house. What’s more,
the user-friendly picture manager lets you view your pictures without entering Windows at
anytime!
The actual boot time is subject to hardware configurations and product models.
ASUS M4A79 Deluxe
1-3
ASUS Quiet Thermal Solutions
Chapter 1
ASUS Quiet Thermal solutions make the system more stable and enhance the overclocking
capability.
Fanless Design—Heat pipe solution
The aesthetic heat pipe design effectively directs the heat generated by the chipsets
to the heatsink near the back IO ports, where it can be carried away by existing airflow
from CPU fan. This innovative and groundbreaking fanless heat pipe design effectively
lowers temperatures by up to 10ºC without having lifetime problems that a normal
chipset fan has. Furthermore, it provides options for users to install side-flow fan or
passive cooler. The heat pipe design is the most reliable fanless thermal solution to
date.
DO NOT uninstall the heat pipe by yourself. Doing so may bend the tubing and affect the
heat dissipation performance.
Fanless Design—Stack Cool 2
ASUS Stack Cool 2 is a fanless and zero-noise cooling solution that lowers the
temperature of critical heat generating components. The motherboard uses a special
design on the printed circuit board (PCB) to dissipate heat generated by these critical
components.
ASUS Q-Fan 2
ASUS Q-Fan 2 technology intelligently adjusts both CPU fan and chassis fan speeds
according to system loading to ensure quiet, cool and efficient operation.
ASUS EZ DIY
ASUS EZ DIY feature collection provides you with easy ways to install computer components,
update the BIOS, or back up your favorite settings.
ASUS Q-Shield
The specially designed ASUS Q-Shield does without the usual “fingers”—making
it convenient and easy to install. With better electric conductivity, it ideally protects
your motherboard against static electricity and shields it against Electronic Magnetic
Interference (EMI).
ASUS Q-Connector
ASUS Q-Connector allows you to easily connect or disconnect the chassis front panel
cables to the motherboard. This unique module eliminates the trouble of connecting the
system panel cables one at a time and avoiding wrong cable connections.
ASUS O.C. Profile
The motherboard features the ASUS O.C. Profile that allows users to conveniently
store or load multiple BIOS settings. The BIOS settings can be stored in the CMOS or
a separate file, giving users freedom to share and distribute their favorite settings.
1-4
Chapter 1: Product Introduction
ASUS CrashFree BIOS 2
Chapter 1
This feature allows you to restore the original BIOS data from the support DVD in case
when the BIOS codes and the data are corrupted. This protection eliminates the need
to buy a replacement ROM chip.
ASUS EZ Flash 2
ASUS EZ Flash 2 is a user-friendly BIOS update utility. Simply press the predefined
hotkey to launch the utility and update the BIOS without entering the OS. Update your
BIOS easily without preparing a bootable diskette or using an OS-based flash utility.
Onboard Switch
With an easy press during overclock, this exclusive onboard switch allows gamer to
effortless fine-tune the performance without having to short the pins or moving jumpers!
1.3.3
ASUS intelligent performance and overclocking features
TurboV
Feel the adrenaline rush of real-time OC—now a reality with the ASUS TurboV. This easy OC
tool allows you to overclock without exiting or rebooting the OS; and its user-friendly interface
makes overclock with just a few clicks away. Moreover, the ASUS OC profiles in TurboV
provides the best O.C. settings in different scenarios.
Turbo Key
ASUS Turbo Key allows the user to turn the PC power button into a physical overclocking
button. After the easy setup, Turbo Key can boost performances without interrupting ongoing
work or games—with just one touch!
Precision Tweaker 2
Allows you to adjust the CPU voltage in 0.0125v steps and NB/DRAM voltage in 0.02v
steps to finetune voltage to achieve the most precise setting for the ultimate overclocking
configuration.
C.P.R. (CPU Parameter Recall)
The C.P.R. feature of the motherboard BIOS allows automatic re-setting to the BIOS default
settings in case the system hangs due to overclocking. When the system hangs due to
overclocking, C.P.R. eliminates the need to open the system chassis and clear the RTC data.
Simply shut down and reboot the system, and the BIOS automatically restores the CPU
default setting for each parameter.
ASUS M4A79 Deluxe
1-5
Chapter 1
1-6
Chapter 1: Product Introduction
Chapter 2
2.1
Before you proceed
Hardware information
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
•
Unplug the power cord from the wall socket before touching any component.
•
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
•
Hold components by the edges to avoid touching the ICs on them.
•
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
Chapter 2
Chapter 2:
ASUS M4A79 Deluxe
2-1
2.2
Motherboard overview
2.2.1
Motherboard layout
Chapter 2
Refer to 2.8 Connectors for more information about rear panel connectors and internal
connectors.
2-2
Chapter 2: Hardware information
Layout contents
Connectors/Jumpers/Slots
Page
1.
ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
2-35
2.
AM2/AM2+ CPU socket
2-5
3.
CPU, chassis, and power fan connectors
(4-pin CPU_FAN, 3-pin CHA_FAN1–2, 3-pin PWR_FAN)
2-33
4.
DDR2 DIMM slots
2-11
5.
IDE connector (40-1 pin PRI_IDE)
2-29
6.
CPU overvoltage setting (3-pin OV_CPU)
2-22
7.
AMD® SB750 Serial ATA connectors (7-pin SATA1–5)
2-30
8.
Clear RTC RAM (3-pin CLRTC)
2-21
9.
System panel connector (20-8 pin PANEL)
2-37
10.
Chassis intrusion connector (4-1 pin CHASSIS)
2-34
11.
Reset switch
2-23
12.
Power-on switch
2-23
13.
USB connectors (10-1 pin USB78, USB910, USB1112)
2-31
14.
Serial port connector (10-1 pin COM1)
2-32
15.
Floppy disk drive connector (34-1 pin FLOPPY)
2-28
16.
IEEE 1394a port connector (10-1 pin IE1394_2)
2-32
17.
Digital audio connector (4-1 pin SPDIF_OUT)
2-28
18.
Optical drive audio connector (4-pin CD)
2-31
19.
Front panel audio connector (10-1 pin AAFP)
2-36
ASUS M4A79 Deluxe
Chapter 2
2.2.2
2-3
2.2.3
Placement direction
When installing the motherboard, ensure that you place it into the chassis in the correct
orientation. The edge with external ports goes to the rear part of the chassis as indicated in
the image below.
2.2.4
Screw holes
Place nine screws into the holes indicated by circles to secure the motherboard to the
chassis.
DO NOT overtighten the screws! Doing so can damage the motherboard.
Chapter 2
Place this side towards
the rear of the chassis
2-4
Chapter 2: Hardware information
2.3
Central Processing Unit (CPU)
The motherboard comes with an AM2+/AM2 socket designed for Phenom™ X4 /
Phenom™ X3 / Athlon™ X2 / Athlon™/ Sempron™ processors (socket AM2+/AM2). It is also
compatible with AMD® Phenom™ II / Athlon™ X4 / Athlon™ X3 / Athlon™ X2 (AM3 CPU).
The AM2+/AM2 socket has a different pinout from the 940-pin socket designed for the AMD
Opteron processor. Ensure that you use a CPU designed for the AM2+/AM2 socket. The
CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent
bending the connectors on the socket and damaging the CPU!
2.3.1
Installing the CPU
To install a CPU:
Locate the CPU socket on the motherboard.
2.
Unlock the socket by pressing the lever
sideways, then lift it up to a 90º angle.
Chapter 2
1.
Ensure that the socket lever is lifted
up to a 90º angle; otherwise, the CPU
will not fit in completely.
ASUS M4A79 Deluxe
Socket lever
2-5
3.
Position the CPU above the socket
such that the CPU corner with the gold
triangle matches the socket corner with
a small triangle.
4.
Carefully insert the CPU into the socket
until it fits in place.
Gold triangle
Small triangle
Chapter 2
5.
When the CPU is in place, push down
the socket lever to secure the CPU. The
lever clicks on the side tab to indicate
that it is locked.
6.
Apply some Thermal Interface Material
to the exposed area of the CPU that the
heatsink will be in contact with, ensuring
that it is spread in an even thin layer.
Some heatsinks come with pre-applied
thermal paste. If so, skip this step.
The Thermal Interface Material is
toxic and inedible. If it gets into your
eyes or touches your skin, wash it off
immediately, and seek professional
medical help.
To prevent contaminating the paste, DO NOT spread the paste with your finger.
2-6
Chapter 2: Hardware information
2.3.2
Installing the CPU heatsink and fan
The AMD AM3/AM2+/AM2 processor requires a specially designed heatsink and fan
assembly to ensure optimum thermal condition and performance.
®
Ensure that you use only AMD-certified heatsink and fan assembly.
To install the CPU heatsink and fan:
Place the heatsink on top of the installed CPU, ensuring that the heatsink fits properly
on the retention module base.
•
The retention module base is already installed on the motherboard upon purchase.
•
You do not have to remove the retention module base when installing the CPU or
installing other motherboard components.
•
If you purchased a separate CPU heatsink and fan assembly, ensure that a Thermal
Interface Material is properly applied to the CPU heatsink or CPU before you install
the heatsink and fan assembly.
Chapter 2
1.
CPU fan
Retention bracket
lock
Retention bracket
CPU heatsink
Retention module
base
Your boxed CPU heatsink and fan assembly should come with installation instructions for
the CPU, heatsink, and the retention mechanism. If the instructions in this section do not
match the CPU documentation, follow the latter.
ASUS M4A79 Deluxe
2-7
Chapter 2
2.
Attach one end of the retention bracket
to the retention module base.
3.
Align the other end of the retention
bracket (near the retention bracket lock)
to the retention module base. A clicking
sound denotes that the retention bracket
is in place.
Ensure that the fan and heatsink
assembly perfectly fits the retention
mechanism module base, otherwise
you cannot snap the retention bracket
in place.
4.
2-8
Push down the retention bracket lock on
the retention mechanism to secure the
heatsink and fan to the module base.
Chapter 2: Hardware information
When the fan and heatsink assembly is in place, connect the CPU fan cable to the
connector on the motherboard labeled CPU_FAN.
•
Do not forget to connect the CPU fan connector! Hardware monitoring errors can
occur if you fail to plug this connector.
•
This connector is backward compatible with old 3-pin CPU fan.
ASUS M4A79 Deluxe
Chapter 2
5.
2-9
2.4
System memory
2.4.1
Overview
The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules
(DIMM) sockets.
A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin
footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched differently to
prevent installation on a DDR DIMM socket.
The figure illustrates the location of the DDR2 DIMM sockets:
Chapter 2
2-10
Chapter 2: Hardware information
2.4.2
Memory configurations
•
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
•
Due to CPU limitation, DDR2 1066 MHz is supported by AM3/AM2+ CPU for one
DIMM per channel only. For system stability, when four DIMMs are installed, all DIMMs
run at DDR2 800 MHz as the default setting.
•
We recommend that you install the memory modules from the yellow slots for better
overclocking capability.
•
Always install DIMMs with the same CAS latency. For optimum compatibility, it is
recommended that you obtain memory modules from the same vendor.
•
Due to the memory address limitation on 32-bit Windows OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
- Use a maximum of 3GB system memory if you are using a 32-bit Windows OS.
- Install a 64-bit Windows OS when you want to install 4GB or more on the
motherboard.
•
This motherboard does not support DIMMs made up of 256 megabit (Mb) chips or
less.
•
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked or at
a higher frequency, see section 3.6 Advanced menu for manual memory frequency
adjustment.
•
For system stability, use a more efficient memory cooling system to support a full
memory load (4 DIMMs) or overclocking condition.
ASUS M4A79 Deluxe
Chapter 2
You may install 512MB, 1GB, 2GB and 4GB unbuffered ECC and non‑ECC DDR2 DIMMs
into the DIMM sockets.
2-11
M4A79 Deluxe Motherboard Qualified Vendors Lists (QVL)
DDR2-1066 MHz capability
Vendor
Part No.
Size
SS/ Chip
DS Brand
Chip NO.
DIMM socket
Timing
support (Optional)
Dimm (Bios) Voltage
A*
B*
C*
A-DATA
ADQYE1A08
1024MB
SS
Heat-Sink Package
5
A-DATA
ADQYE1B16
BoxP/N:CH.02GAF.C0KK2
(78.0AG9S.9KF)
BoxP/N:CH.04GAF.F0KK2
Apacer
(78.AAGAL.9KF)
CORSAIR BoxP/N:TWIN2X4096-8500C5DF
(CM2X2048-8500C5D)(EPP)
Apacer
DS
N/A
N/A
Heat-Sink Package
Heat-Sink Package
5-5-5-15
V
V
V
N/A
Heat-Sink Package
5-5-5-15
V
V
V
4096MB (Kit of 2) DS
N/A
Heat-Sink Package
5-5-5-15
2.1
V
V
2.0
V
V
V
V
V
V
1024MB
SS
N/A
Heat-Sink Package
5-5-5-15
1024MB
DS
N/A
Heat-Sink Package
5
G.SKILL
GEIL
GEIL
F2-8500CL5D-4GBPK
GB22GB8500C5DC
GE24GB1066C5QC
1024MB
DS
2048MB (Kit of 2) DS
4096MB (Kit of 2) DS
2048MB (Kit of 2) SS
4096MB (Kitof4)
SS
N/A
N/A
N/A
GEIL
N/A
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
5-5-5-15
2.0-2.1
5-5-5-15
2.0-2.1
5-5-5-15
GL2L128M88BA25AB 5-5-5-15
Heat-Sink Package
5-5-5-15
2.0-2.1
2.2-2.4
2.2-2.4
Chapter 2
GEIL
GB24GB8500C5DC
4096MB (Kit of 2) DS
GEIL
GL2L128M88BA25AB 5-5-5-15
Heat-Sink Package
5-5-5-15
2.2-2.4
GEIL
GX24GB8500C5UDC
4096MB (Kit of 2) DS
N/A
Heat-Sink Package
5-5-5-15
2.2-2.4
GEIL
GEIL
Hynix
Hynix
GE24GB1066C5DC
GB24GB8500C5QC
HYMP564U64FP8-G7
HYMP 512U64FP8-G7
KINGMAX KLEC28F-A8KI5-EGAS
4096MB (Kit of 2) DS
4096MB (Kitof4)
DS
512MB
SS
1024MB
DS
N/A
GEIL
HYNIX
HYNIX
GL2L128M88BA25AB 5-5-5-15
HY5PS12821FFP-G7
HY5PS12821FFP-G7
KINGMAX KLED48F-A8KI5-EPA
512MB
1024MB
SS
KINGMAX KKA8FEIBF-HJK-18E
KINGMAX KLEE88F-B8KB5
2048MB
DS
KINGMAX KKB8FFBXF-CFP-18A
KINGSTON KHX8500D2/ 512
KINGSTON KVR1066D2N7/ 512
KINGSTON KHX8500D2K2/1G
KINGSTON KHX8500D2/1G
KINGSTON KVR1066D2N7/1G
KINGSTON KHX8500D2K2/2G
KINGSTON KHX8500D2K2/2GN(EPP)
MICRON
MICRON
OCZ
OCZ
OCZ
Qimonda
Qimonda
Qimonda
MT8HTF12864AY-1GAE1
MT16HTF25664AY-1GAE1
OCZ2N10662GK(EPP)
OCZ2N1066SR2GK(EPP)
OCZ2RPR10664GK
HYS64T64000EU-19F-C
HYS64T128020EU-1.9-C
HYS64T128020EU-19F-C
SAMSUNG M378T2953GZ3-CF8
Transcend TX1066QLU-4GK
512MB
512MB
DS
SS
SS
1024MB (Kit of 2) SS
1024MB
1024MB
DS
DS
2048MB (Kit of 2) DS
2048MB (Kit of 2) DS
1024MB
2048MB
SS
DS
2048MB (Kit of 2) DS
2048MB (Kit of 2) DS
4096MB (Kit of 2) DS
512MB
1024MB
1024MB
1024MB
SS
DS
DS
DS
N/A
N/A
ELPIDA
N/A
N/A
MICRON
MICRON
N/A
N/A
Qimonda
Qimonda
Qimonda
Heat-Sink Package
2.2
Heat-Sink Package
2.2
E5108AJBG-1J-E
1.8
Heat-Sink Package
D9JKH
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
2.2
7
5
5
2048MB
DS
N/A
Heat-Sink Package
6
BUFFALO FSX1066D2C-1G
1024MB
DS
N/A
Heat-Sink Package
BUFFALO FSX1066D2C-K4G
2048MB
DS
N/A
Heat-Sink Package
Kingbox
Mushkin
Mushkin
Mushkin
Team
Team
Team
N/A
996535
996612
996619
1024MB
1024MB
DS
DS
2048MB (Kit of 2) DS
2048MB (Kit of 2) DS
4096MB (Kit of 2) DS
BoxP/N:TXDD2048M1066HC5DC 2048MB (Kit of 2) DS
(TXDD1024M1066HC5)
BoxP/N:TXDD2048M1066HC5DC-D 2048MB (Kit of 2) DS
(TXDD1024M1066HC5-D)
BoxP/N:TXDD4096M1066HC5DC-D 4096MB (Kit of 2) DS
(TXDD2048M1066HC5-D)
Elixir
MICRON
N/A
N/A
N/A
2.2
N2TU 51280CE-BD
7YDI2
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
6
V
V
V
V
5-5-5-15
5-5-5-15
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
5-5-5-15
Heat-Sink Package
V
V
5-5-5-15
(800-5-5-5-15)
5-5-4-12
V
V
V
V
V
V
V
V
V
V
V
V
5
Heat-Sink Package
Heat-Sink Package
V
V
7
5
M2Y1G64TU8HC4B-BD
2.10
HYB18T 512800CF19F 6
Heat-Sink Package
Elixir
V
V
V
HYB18T 512800CF19 7
N/A
AXT860UD20-19E
2.2
7
HYB18T 512800CF19F 6
SAMSUNG K4T51083QG
V
V
1.8
E5108AJBG-1J-E
D9JKH
V
V
Heat-Sink Package
Heat-Sink Package
V
V
KINGMAX KKA8FEIBF-HJK-18A
ELPIDA
V
V
2048MB (Kit of 2) DS
Aeneon
2.2-2.4
7-7-7-12
Heat-Sink Package
BoxP/N:AXT760UD00-19D-K-2G
(AXT760UD00-19D)
4096MB (Kit of 2) DS
2.2-2.4
7
N/A
Aeneon
V
N/A
BL12864AA1065.16FD5(EPP)
F2-8500CL5D-2GBPK
V
4096MB (Kit of 2) DS
BL12864AA106A.8FE5(EPP)
G.SKILL
V
2048MB (Kit of 2) DS
Crucial
F2-8500CL5S-1GBPK
V
5
Crucial
G.SKILL
2-12
2048MB
1.8
2.1
V
V
2.0-2.1
V
V
V
N/A
Heat-Sink Package
5-5-5-15
2.2-2.3
V
N/A
Heat-Sink Package
5-5-5-15
2.2-2.3
V
N/A
Heat-Sink Package
5-5-5-15
2.2-2.3
Chapter 2: Hardware information
V
V
V
V
V
V
V
V
M4A79 Deluxe Motherboard Qualified Vendors Lists (QVL)
DDR2-800 MHz capability
Part No.
Size
SS/ Chip
DS Brand
Chip NO.
A-DATA
M2OAD6H3J4171Q1E52
2048MB
DS A-DATA
AD20908A8A-25EG
Apacer
78.01GA0.9K5
1024MB
SS APACER
AM4B5808CQJS8E
CM2X1024-6400C4
1024MB
Apacer
Apacer
CORSAIR
CORSAIR
CORSAIR
CORSAIR
Crucial
Crucial
Crucial
Crucial
Crucial
ELPIDA
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
Hynix
Hynix
Hynix
KINGMAX
KINGMAX
78.91G9I.9K5
78.A1GA0.9K4
512MB
2048MB
DS APACER
DS N/A
BoxP/N:TWIN2X4096-6400C4DHX 4096MB(Kit of 2) DS N/A
(CM2X2048-6400C4DHX)
BoxP/N:TWIN2X4096-6400C5
(CM2X2048-6400C5)
BL12864AA80A.8FE5(EPP)
1024MB
BL12864AA804.16FD
1024MB
AM4B5708JQJS8E
5
AM4B5808CQJS8E
5
Heat-Sink Package
Heat-Sink Package
V
V
V
V
V
V
5
4
1.9
4-4-4-12
V
2.10
V
V
V
V
V
V
V
V
V
V
V
4096MB(Kit of 2) DS N/A
Heat-Sink Package
5-5-5-18
1.80
V
V
V
BoxP/N:TWIN2X4096-6400C5DHX 4096MB(Kit of 2) DS N/A
(CM2X2048-6400C5DHX)
Heat-Sink Package
5-5-5-18
1.80
V
V
V
BL12864AA804.16FD3
SS N/A
Heat-Sink Package
2.0
V
V
V
DS N/A
Heat-Sink Package
4-4-4-12
Heat-Sink Package
4
2.2
V
V
V
2.0
V
BL12864AL804.16FD3
BL25664AA80A.16FE5(EPP)
EBE10EE8ABFA-8E-E
F2-6400CL5D-1GBNQ
F2-6400CL4D-2GBHK
F2-6400CL4D-2GBPK
F2-6400CL5D-2GBNQ
F2-6400PHU2-2GBNR
F2-6400CL4D-4GBPK
F2-6400CL5D-4GBPQ
F2-6400CL6D-4GBMQ
F2-6400CL6D-8GBMQ
GB22GB6400C4DC
GB22GB6400C5DC
GE22GB800C4DC
GE22GB800C5DC
GX22GB6400DC
GX22GB6400UDC
GX22GB6400C4USC
GX22GB6400LX
GB24GB6400C4DC
GB24GB6400C5DC
GB24GB6400C5QC
GE24GB800C4DC
GE24GB800C5DC
GX24GB6400DC
GB24GB6400C4QC
GE24GB800C5QC
GB28GB6400C4QC
GB28GB6400C5QC
GE28GB800C4QC
GE28GB800C5QC
HYMP564U64CP8-S5
1024MB
1024MB
2048MB
1024MB
DS
1024MB
DS
DS
4096MB(Kit of 2) DS N/A
4096MB(Kit of 2) DS N/A
4096MB(Kit of 2) DS N/A
8192MB(Kit of 2) DS N/A
2048MB(Kit of 2) DS GEIL
2048MB(Kit of 2) DS GEIL
2048MB(Kit of 2) DS N/A
2048MB(Kit of 2) DS N/A
2048MB(Kit of 2) DS N/A
2048MB(Kit of 2) DS N/A
2048MB
2048MB
DS N/A
DS N/A
4096MB(Kit of 2) DS GEIL
4096MB(Kit of 2) DS GEIL
4096MB(Kit of 2) DS GEIL
4096MB(Kit of 2) DS N/A
4096MB(Kit of 2) DS N/A
4096MB(Kit of 2) DS N/A
4096MB(Kitof4)
DS GEIL
8192MB(Kitof4)
DS GEIL
4096MB(Kitof4)
8192MB(Kitof4)
8192MB(Kitof4)
8192MB(Kitof4)
512MB
512MB
1024MB
1024MB
KINGSTON KHX6400D2/ 512
512MB
KINGSTON KVR800D2N6/ 512
SS ELPIDA
1024MB
1024MB
KLDC28F-A8KI5
KINGSTON KVR800D2N5/ 512
DS N/A
DS
1024MB
KLDE88F-B8KB5
DS N/A
1024MB
HYMP112U64CP8-S6
HYMP 512U64CP8-S5
DS N/A
1024MB(Kit of 2) SS N/A
KLDD48F-ABKI5
KINGMAX
SS APACER
DIMM socket
Timing
support (Optional)
Dimm (Bios) Voltage
A*
B*
C*
2048MB
512MB
512MB
DS N/A
DS GEIL
DS N/A
DS N/A
SS HYNIX
SS HYNIX
DS
Heat-Sink Package
Heat-Sink Package
4-4-4-12
5
5-5-5-15
2.2
1.7-1.9
1.8-2.0
Heat-Sink Package
5
V
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
GL2L64M088BA30EB
GL2L64M088BA30EB
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
5
4
2.0-2.1
6
1.8-1.9
5
6-6-6-18
4-4-4-12
5-5-5-15
4-4-4-12
5-5-5-15
5-5-5-15
4-4-4-12
Heat-Sink Package
5-5-5-15
GL2L128M88BA25AB
5-5-5-15
GL2L128M88BA25AB
GL2L64M088BA30EB
Heat-Sink Package
Heat-Sink Package
Heat-Sink Package
GL2L64M088BA30EB
Heat-Sink Package
GL2L128M88BA25AB
GL2L128M88BA25AB
Heat-Sink Package
Heat-Sink Package
HY5PS12821CFP-S5
HY5PS1G831CFP-S6
HY5PS12821CFP-S5
1.8-1.9
1.8
2.0
1.8
2.0
1.8
1.8
2.1
4-4-4-12
2.0
5-5-5-15
1.8
4-4-4-12
5-5-5-15
5-5-5-15
4-4-4-12
5-5-5-15
4-4-4-12
5-5-5-15
4-4-4-12
5-5-5-15
5
6
1.8
2.0
1.8
2.0
1.8
2.0
1.8
1.8
Heat-Sink Package
4
V
V
V
V
V
V
V
V
V
V
V
V
V
1.8
DS N/A
V
V
E5108AJBG-8E-E
HY5PS1GB31CFP-S5
V
V
SS ELPIDA
4
V
1.8
1.8
Heat-Sink Package
V
V
2.0
5
E5108AJBG-8E-E
V
1.8
1.95
1024MB
V
V
Heat-Sink Package
SS HYNIX
V
4
SS N/A
SS ELPIDA
V
Heat-Sink Package
DS KINGMAX KKB8FFBXF-CFA-25A
KINGSTON KHX6400D2LL/1G
ASUS M4A79 Deluxe
E1108AB-8E-E(ECC)
4
2.2
DS KINGMAX KKA8FEIBF-HJK-25A
1024MB(Kit of 2) SS N/A
1024MB
Heat-Sink Package
SS KINGMAX KKA8FEIBF-HJK-25A
KINGSTON KHX6400D2LLK2/1GN(EPP)
KINGSTON KVR800D2N5/1G
Heat-Sink Package
4
2.0
1.8
2.0
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
v
V
V
V
V
V
V
Chapter 2
Vendor
v
V
V
V
V
V
V
V
V
V
V
V
V
V
2-13
M4A79 Deluxe Motherboard Qualified Vendors Lists (QVL)
DDR2-800 MHz capability (cont.)
Size
SS/ Chip
DS Brand
Chip NO.
KINGSTON KVR800D2N5/1G
1024MB
DS ELPIDA
E5108AJBG-8E-E
KINGSTON KVR800D2N6/1G
1024MB
DS ELPIDA
E5108AJBG-8E-E
Vendor
Part No.
KINGSTON KVR800D2N5/1G
KINGSTON KHX6400D2LLK2/2GN(EPP)
KINGSTON KHX6400D2ULK2/2G
KINGSTON KHX6400D2/2G
KINGSTON KVR800D2N5/2G
KINGSTON KVR800D2N6/4G
NANYA
NT 512T64U88B0BY-25C
NANYA
NT1GT64U8HCOBY-25D
NANYA
NANYA
OCZ
OCZ
OCZ
Chapter 2
PSC
Qimonda
Qimonda
Qimonda
Qimonda
2048MB(Kit of 2) DS N/A
2048MB
DS N/A
4096MB
DS ELPIDA
2048MB
512MB
1024MB
NT2GT64U8HC0BY-AC
2048MB
OCZ2T8002GK(EPP)
OCZ2P8004GK
OCZ2G8008GK
AL8E8F73C-8E1
HYS64T256020EU-2.5-C2
HYS64T256020EU-25F-C2
HYS64T 512020EU-2.5-A
HYS64T 512020EU-25F-A
1024MB
1024MB
Super Talent T800UA12C4
4096MB
4096MB
512MB
1024MB
2048MB
2048MB
4096MB
512MB
Transcend
1024MB
Transcend
JM800QLU-2G
Transcend
TS128MLQ64V8U
TS256MLQ64V8P
DS N/A
DS Qimonda
1024MB
JM800QLU-1G
DS NANYA
2048MB
2048MB
Super Talent T800UB1GC4
Transcend
DS NANYA
DS PSC
1024MB
SAMSUNG M378T5263AZ3-CF7
DS
2048MB
SAMSUNG M378T2953GZ3-CF7
SAMSUNG M391T5663QZ3-CF7
SS
8192MB(Kit of 2) DS N/A
1024MB
SAMSUNG M378T5663QZ3-CF7
DS ELPIDA
4096MB(Kit of 2) DS N/A
SAMSUNG M378T2863QZS-CF7
SAMSUNG M391T2863QZ3-CF7
DS
2048MB(Kit of 2) DS N/A
NT1GT64U8HB0BY-25C
SAMSUNG M378T6553GZS-CF7
1024MB
2048MB
2048MB
DS Qimonda
DS Qimonda
DS Qimonda
V
V
Heat-Sink Package
2.3-2.35 V
V
E1108ACBG-8E-E
1.8
V
V59C1 512804QBF25
Heat-Sink Package
E2108ABSE-8G-E
NT5TU64M8BE-25C
NT5TU64M8BE-25C
NT5TU64M8CE-25D
2.0
5
5
Heat-Sink Package
5-4-4
Heat-Sink Package
Heat-Sink Package
1.8
5
1.80
SS SAMSUNG K4T1G084QQ(ECC)
DS SAMSUNG K4T51083QG
DS SAMSUNG K4T1G084QQ(ECC)
DS SAMSUNG K4T1G084QQ
DS SAMSUNG K4T2G084QA-HCF7
Heat-Sink Package
Heat-Sink Package
5
E1108ACBG-8E-E
DS ELPIDA
E1108ACBG-BE-E
V
Aeneon
AET760UD00-25DC08X
1024MB
SS AENEON
AET03R25DC
5
AET03R25DC
5
Aeneon
Aeneon
Asint
Asint
CENTURY
Elixir
Elixir
Elixir
Kingbox
Kingbox
Mushkin
Oci
Patriot
Patriot
Patriot
Patriot
Silicon
Power
Silicon
Power
Team
AET760UD00-25DB97X
AET860UD00-25DC08X
SLY2128M8-JGE
SLZ2128M8-JGE
28V2H8
1024MB
2048MB
1024MB
2048MB
512MB
M2Y1G64TU88D4B-AC
1024MB
M2Y2G64TU8HD4B-AC
2048MB
M2Y1G64TU8HB0B-25C
N/A
N/A
XP2-6400
04701G16CZ5D2A
PSD2 51280081
1024MB
2048MB
2048MB
1024MB
1024MB
512MB
DS AENEON
DS AENEON
SS Asint
DS Asint
SS HYNIX
SS Elixir
DS Elixir
DS Elixir
DS MICRON
4096MB(Kit of 2) DS N/A
SP001GBLRU800S02
DS PATRIOT
V
V
1.8
DDRII1208-GE
HY5PS12821BFP-S5
5
N2TU1G80DE-AC
5
N2TU 51280BE-25C
D9HNL
64M8PC6400
5
1.8
Heat-Sink Package
4-4-4-12
5
V
V
V
V
2.2
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
2048MB
DS S-POWER 10YR9N3
5(5-5-5-15)
V
TEDD1024M800HC5
1024MB
DS N/A
5-5-5-15
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
v
V
V
V
V
V
V
V
V
V
V
SP002GBLRU800S02
V
V
V
SS S-POWER 10YR9N3
V
V
V
V
V
V
V
V
1024MB
Heat-Sink Package
5(5-5-5-15)
V
V
5
5
V
V
4
PM64M8D2BU-25PAC
PM128M8D2BU-25KC
V
V
N2TU1G80DE-AC
PM64M8D2BU-25EC
PDC24G6400LLK
2048MB
DDRII1208-GE
SS PATRIOT
DS PATRIOT
5
5
Heat-Sink Package
1024MB
PSD22GB002
AET93R25DB
SS
PSD21G8002
V
E1108ACBG-8E-E(ECC) 5
DS KINGBOX EPD2128082200E-3
DS Jnfinity
V
6-6-6(800-5-5-5-15)
E1108ACBG-8E-E
DS ELPIDA
V
V
DS ELPIDA
2048MB
V
5
2048MB
V
V
V
V
V
6
V
V
V
6
V
V
V
6
V
V
V
6
V
v
V
V
6
V
V
V
6
DS Transcend TQ243PCF8
SS ELPIDA
V
V
6
5
V
V
5
SS Transcend TQ243ECF8
V
V
6
TS256MLQ64V8U
TS256MLQ72V8U
1.8
HYB18T1G800C2F-25F 5
HYB18T2G800AF-25F
V
V
HYB18T1G800C2F-2.5 6
HYB18T2G800AF-2.5
V
V
5
A3R1GE3CFF734MAA0E 5
V
V
5
NT5TU128M8CE-AC
SS SAMSUNG K4T1G084QQ
DS
1.8
Heat-Sink Package
SS SAMSUNG K4T51083QG
SS
1.8
Transcend
Transcend
2-14
1024MB
DIMM socket
Timing
support (Optional)
Dimm (Bios) Voltage
A*
B*
C*
1.8
V
V
V
V
Chapter 2: Hardware information
V
V
V
V
V
V
V
V
V
V
V
V
M4A79 Deluxe Motherboard Qualified Vendors Lists (QVL)
DDR2-667 MHz capability
Part No.
Size
SS/ Chip Brand Chip NO.
DS
Apacer
78.01G9O.9K5
1024MB
SS APACER
AM4B5808CQJS7E
CORSAIR
VS 512MB667D2
512MB
SS N/A
64M8CFEG
Apacer
CORSAIR
Crucial
Crucial
ELPIDA
G.SKILL
GEIL
GEIL
Hynix
Hynix
78.A1G9O.9K4
2048MB
VS1GB667D2
1024MB
BL12864AL664.16FD
1024MB
BL12864AA663.16FD
EBE51UD8AEFA-6E-E
1024MB
512MB
DS APACER
DS N/A
DS N/A
DS N/A
SS ELPIDA
F2-5400PHU2-2GBNT 2048MB(Kit of 2) DS G.Skill
AM4B5808CQJS7E
64M8CFEG
Heat-Sink Package
Heat-Sink Package
E5108AE-6E-E
D264M8GCF
GX22GB5300LX
2048MB
DS N/A
HYMP112U64CP8-Y5
1024MB
SS HYNIX
512MB
SS KINGSTON D6408TEBGGL3U
GX24GB5300LDC
4096MB(Kit of 2) DS N/A
HYMP 512U64CP8-Y5 1024MB
KINGSTON KVR667D2N5/ 512
KINGSTON KVR667D2E5/1G
1024MB
KINGSTON KVR667D2N5/1G
1024MB
KINGSTON KVR667D2N5/1G
1024MB
DS HYNIX
Heat-Sink Package
Heat-Sink Package
HY5PS1G831CFP-Y5
HY5PS12821CFP-Y5
DS ELPIDA
E5108AGBG-6E-E(ECC)
DS ELPIDA
E5108AJBG-8E-E
DIMM socket
Timing
support (Optional)
Dimm (Bios) Voltage
A*
B*
C*
5
5
N/A
N/A
3
2.2
N/A
V
N/A
V
2.2
V
1.8
V
5-5-5-15
1.8
V
5
1.8
V
3
5
5-5-5-15
5-5-5-15
5
5
DS KINGSTON E5108AGBG-6E-E
1.7-1.9
1.7-1.9
V
1.8
V
1.8
V
1.8
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
Chapter 2
Vendor
SS - Single-sided DS - Double-sided
DIMM support:
•
A*: S
upports one module inserted in any slot as single-channel
memory configuration.
•
B*: S
upports one pair of modules inserted into either the yellow slots or
the black slots as one pair of dual-channel memory configuration.
•
C*: S
upports four modules inserted into both the yellow and black slots as
two pairs of dual‑channel memory configuration.
Visit the ASUS website at www.asus.com for the latest QVL.
ASUS M4A79 Deluxe
2-15
2.4.3
Installing a DIMM
Ensure to unplug the power supply before adding or removing DIMMs or other system
components. Failure to do so may cause severe damage to both the motherboard and the
components.
2
To install a DIMM:
1.
2.
DIMM notch
Press the retaining clips outward to
unlock a DIMM socket.
Align a DIMM on the socket such that
the notch on the DIMM matches the
break on the socket.
1
1
Chapter 2
Unlocked retaining clip
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into
a socket to avoid damaging the DIMM.
3.
Firmly insert the DIMM into the socket
until the retaining clips snap back in
place and the DIMM is properly seated.
3
Locked Retaining Clip
2.4.4
Removing a DIMM
2
To remove a DIMM:
1.
Simultaneously press the retaining
clips outward to unlock the DIMM.
1
1
DIMM notch
Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM
might get damaged when it flips out with extra force.
2.
2-16
Remove the DIMM from the socket.
Chapter 2: Hardware information
2.5
Expansion slots
In the future, you may need to install expansion cards. The following subsections describe the
slots and the expansion cards that they support.
Ensure to unplug the power cord before adding or removing expansion cards. Failure to do
so may cause you physical injury and damage motherboard components.
2.5.1
Installing an expansion card
To install an expansion card:
2.
3.
4.
5.
6.
Before installing the expansion card, read the documentation that came with it and
make the necessary hardware settings for the card.
Remove the system unit cover (if your motherboard is already installed in a chassis).
Remove the bracket opposite the slot that you intend to use. Keep the screw for later
use.
Chapter 2
1.
Align the card connector with the slot and press firmly until the card is completely
seated on the slot.
Secure the card to the chassis with the screw you removed earlier.
Replace the system cover.
2.5.2
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software settings.
1.
2.
3.
Turn on the system and change the necessary BIOS settings, if any. See Chapter 3 for
information on BIOS setup.
Assign an IRQ to the card. Refer to the tables on the next page.
Install the software drivers for the expansion card.
When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that
the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI
groups, making the system unstable and the card inoperable. Refer to the table on the next
page for details.
ASUS M4A79 Deluxe
2-17
2.5.3
Interrupt assignments
Standard interrupt assignments
IRQ
0
1
2
Priority Standard function
1
System Timer
–
Redirect to IRQ#9
2
4
12
6
14
5
7
8
9
Chapter 2
10
11
12
13
14
13
15
3
4
5
6
7
8
9
Keyboard Controller
Communications Port (COM1)*
IRQ Holder for PCI Steering*
Floppy Disk Controller
Reserved
System CMOS/Real Time Clock
IRQ Holder for PCI Steering*
IRQ Holder for PCI Steering*
IRQ Holder for PCI Steering*
Reserved
Numeric Data Processor
Primary IDE Channel
* These IRQs are usually available for ISA or PCI devices.
IRQ assignments for this motherboard
PCIE x16_1
PCIE x16_2
PCIE x16_3
PCIE x16_4
USB controller 1
USB controller 2
USB controller 3
USB controller 4
USB 2.0 controller
HD audio
Onboard SATA
2-18
A
shared
shared
shared
shared
–
–
–
–
–
shared
–
B
shared
shared
shared
shared
–
–
–
–
–
–
–
C
shared
shared
shared
shared
–
–
–
–
–
–
–
D
shared
shared
shared
shared
shared
shared
shared
shared
shared
–
–
E
–
–
–
–
–
–
–
–
–
–
F
–
–
–
–
–
–
–
–
–
–
shared
G
–
–
–
–
–
–
–
–
–
–
–
H
–
–
–
–
–
–
–
–
–
–
–
Chapter 2: Hardware information
2.5.4
PCI slots
The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that
comply with PCI specifications. Refer to the figure below for the location of the slots.
2.5.5
Four PCI Express 2.0 x16 slots
Chapter 2
This motherboard supports four ATI CrossFireX™ PCI Express x16 graphics cards
that comply with the PCI Express specifications. With four graphics cards installed, the
motherboard can enable quad‑display. Refer to the figure below for the location of the slots.
Primary PCI Express x16_1 slot
(blue, at max. x16 link)
PCI slot
PCI Express x 16_4 slot (black, at max. x8 link)
Primary PCI Express x16_3 slot (blue, at max. x16 link)
PCI slot
PCI Express x 16_2 slot (black, at max. x8 link)
Before installing a graphics card on PCI Express x 16_4 slot, we recommend that you
connect the necessary cables to the connectors beside the slot first
ASUS M4A79 Deluxe
2-19
Primary PCI Express x16 slots
The primary PCI Express x16 slots support PCI Express x16 graphics cards that comply with
the PCI Express specifications.
Universal PCI Express x16 slots (max. x8 mode)
This motherboard also supports universal PCI Express x16 slots with a maximum speed of
8 GB/s. The operating frequency of this slot changes, depending on the type of PCI Express
card you install. Refer to the table below for details.
If you install multiple graphics cards, we recommend that you plug the rear chassis fan
cable to the motherboard connector labeled CHA_FAN1/2 for better thermal environment.
See page 2-33 for the connector location.
Chapter 2
PCIex16_1
(Blue)
PCIex16_2
(Black)
PCIex16_3
(Blue)
PCIex16_4
(Black)
Single VGA/PCIe card
x16
x1
x16
x1
Dual VGA/PCIe card
x16
x1
x16
x1
x16
x1
x8
x8
x8
x8
x16
x1
x8
x8
x8
x8
Triple VGA/PCIe card
Quad VGA card
2-20
PCI Express operating mode
VGA configuration
•
When using one graphics card and a x4 PCIe card at the same time, install them to
the blue slots.
•
When using two graphics card, install them to the blue slots.
•
If you install two graphics cards to the blue slots and use other x4 PCIe cards
simultaneously, the x4 PCIe cards will downgrade to x1 mode for optimum VGA
performance. You may reassign PCIe width in BIOS settings. Refer to page 3-21 for
details.
Chapter 2: Hardware information
2.6
Clear RTC RAM (3-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
clear the CMOS memory of date, time, and system setup parameters by erasing
the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in
CMOS, which include system setup information such as system passwords.
Chapter 2
1.
Jumpers
To erase the RTC RAM
1.
Turn OFF the computer and unplug the power cord.
3.
Plug the power cord and turn ON the computer.
2.
4.
Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3
for about 5–10 seconds, then move the cap back to pins 1-2.
Hold down the <Del> key during the boot process and enter BIOS setup to re-enter
data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
•
If the steps above do not help, remove the onboard battery and move the jumper again
to clear the CMOS RTC RAM data. After the CMOS clearance, reinstall the battery.
•
You do not need to clear the RTC when the system hangs due to overclocking. For
system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature.
Shut down and reboot the system so the BIOS can automatically reset parameter
settings to default values.
•
Due to the chipset behavior, AC power off is required to enable C.P.R. function. You
must turn off and on the power supply or unplug and plug the power cord before
rebooting the system.
ASUS M4A79 Deluxe
2-21
2.
CPU overvoltage setting (3-pin OV_CPU)
This jumper allows you to enable or disable the advanced CPU overvoltage setting in
BIOS. Read the following information before you change the jumper setting. Set to pins
1-2 to activate the advanced CPU overvoltage feature.
Chapter 2
OV_CPU
2-22
Pins 2-3 (Default)
0.80V – 1.70V
Pins 1-2 (OV Enabled)
up to 1.90V
•
Before you change the jumper setting for extra-high overvoltage ability, use the BIOS
items introduced in 3.5 Ai Tweaker menu first to adjust the desired CPU performance.
Ensure that your system functions well under the highest BIOS voltage setting before
you change the setting of this jumper.
•
Refer to 3.5 Ai Tweaker menu for more information about the CPU overvoltage
setting.
•
DO NOT set the OV_CPU jumper to pins 1-2 when you install a new CPU and have
not booted for the first time. Doing so may cause the system to halt. For system failure
due to the wrong setting of the OV_CPU jumper, shut down the computer and move
the cap back to pins 2-3.
•
The system may need a better cooling system (for example, a water-cooling system)
to work stably under high voltage settings.
Chapter 2: Hardware information
2.7
Onboard switches
Onboard switches allow you to power on or reboot the system quickly and conveniently on a
bare or open-case system.
2.
Power-on switch
Press the power-on switch to wake/power up the system.
Chapter 2
1.
Reset switch
Press the reset switch to reboot the system.
ASUS M4A79 Deluxe
2-23
2.8
Connectors
2.8.1
Rear panel connectors
Chapter 2
Rear panel connectors
1. PS/2 mouse port (green)
7. Optical S/PDIF Out port
2. Coaxial S/PDIF Out port
8. External SATA port*
3. IEEE 1394a port
9. USB 2.0 ports 3 and 4
4. LAN (RJ-45) port**
10. USB 2.0 ports 1 and 2
5. PS/2 keyboard port (purple)
11. Audio I/O ports***
6. USB 2.0 ports 5 and 6
* To use hot-plug, set the OnChip SATA Type in the BIOS settings to [AHCI] mode. See
section 3.4.2 Storage Configuration for details.
2-24
Chapter 2: Hardware information
** LAN port LED indications
Status
OFF
10 Mbps
connection
100 Mbps
connection
Left LED
OFF
Orange (blinking during
data activity)
1 Gbps connection
OFF
OFF
Left
LED
Right LED
OFF
Right
LED
OFF
Orange (blinking during
data activity)
Green (blinking during
data activity)
LAN port
*** Audio 2, 4, 6, or 8-channel configuration
Light Blue
Lime
Pink
Orange
Headset
2-channel
4-channel
Line Out
Front Speaker Out
Front Speaker Out
Front Speaker Out
–
–
Center/Subwoofer
Center/Subwoofer
–
–
Line In
Mic In
Black
–
Gray
2.8.2
–
Line In
Mic In
Rear Speaker Out
6-channel
Line In
Mic In
Rear Speaker Out
8-channel
Line In
Chapter 2
Port
Mic In
Rear Speaker Out
Side Speaker Out
Audio I/O connections
Audio I/O ports
Connect to Headphone and Mic
ASUS M4A79 Deluxe
2-25
Connect to Stereo Speakers
Chapter 2
Connect to 2.1 channel Speakers
Connect to 4.1 channel Speakers
2-26
Chapter 2: Hardware information
Chapter 2
Connect to 5.1 channel Speakers
Connect to 7.1 channel Speakers
ASUS M4A79 Deluxe
2-27
2.8.3
1.
Chapter 2
2.
Internal connectors
Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end
of the cable to this connector, then connect the other end to the signal connector at the
back of the floppy disk drive.
•
Pin 5 on the connector is removed to prevent incorrect cable connection when using
an FDD cable with a covered Pin 5.
•
The floppy disk drive cable is purchased separately.
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s).
Connect the S/PDIF Out module cable to this connector, then install the module to a
slot opening at the back of the system chassis.
The S/PDIF module is purchased separately.
2-28
Chapter 2: Hardware information
IDE connector (40-1 pin PRI_IDE)
The onboard IDE connector is for the Ultra DMA 133/100/66 signal cable. There are
three connectors on each Ultra DMA 133/100/66 signal cable: blue, black, and gray.
Connect the blue connector to the motherboard’s IDE connector, then select one of the
following modes to configure your device.
Chapter 2
3.
Drive jumper setting
Single device
Two devices
Cable-Select or Master
Mode of
device(s)
Cable connector
Cable-Select
Master
-
Black
Black
Master
Master
Slave
Gray
Black or gray
Slave
Slave
•
Pin 20 on the IDE connector is removed to match the covered hole on the Ultra DMA
cable connector. This prevents incorrect insertion when you connect the IDE cable.
•
Use the 80-conductor IDE cable for Ultra DMA 133/100/66 IDE devices.
If any device jumper is set as “Cable-Select”, ensure that all other device jumpers have the
same setting.
ASUS M4A79 Deluxe
2-29
4.
AMD® SB750 Southbridge Serial ATA connectors (7-pin SATA1–5)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk and
optical disk drives.
If you install SATA hard disk drives to the SATA1–5 connectors, you can create a RAID
0, RAID 1, RAID 5, RAID 10 or JBOD configuration through the onboard AMD® SB750
controller.
These connectors are set to [IDE] by default. If you intend to create a Serial ATA RAID set
using these connectors, set the Onchip SATA Type item in the BIOS to [RAID].
Chapter 2
Important note on Serial ATA
Install the Windows® XP Service Pack 1 before using Serial ATA.
2-30
•
For detailed instructions on how to configure RAID 0, RAID 1, RAID 5 and RAID 10,
refer to the RAID manual in the support DVD.
•
If you intend to create a Serial ATA RAID set using these connectors, set the Onchip
SATA Type item in the BIOS to [RAID].
Chapter 2: Hardware information
USB connectors (10-1 pin USB 78; USB910; USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
Chapter 2
5.
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and
then install the Q-Connector (USB) to the USB connector onboard if your chassis supports
front panel USB ports.
6.
Optical drive audio connector (4-pin CD)
These connectors allow you to receive stereo audio input from sound sources such as
a CD-ROM, TV tuner, or MPEG card.
ASUS M4A79 Deluxe
2-31
7.
IEEE 1394a port connector (10-1 pin IE1394_2)
This connector is for an IEEE 1394a port. Connect the IEEE 1394a module cable
to this connector, then install the module to a slot opening at the back of the system
chassis.
Chapter 2
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage the
motherboard!
8.
Serial port connector (10-1 pin COM1)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
The COM module is purchased separately.
2-32
Chapter 2: Hardware information
9.
CPU, chassis, and power fan connectors
(4-pin CPU_FAN; 3-pin CHA_FAN1; 3-pin CHA_FAN2; 3-pin PWR_FAN)
Chapter 2
The fan connectors support cooling fans of 350 mA~2000 mA (24 W max.) or a total
of 1 A~7 A (84 W max.) at +12V. Connect the fan cables to the fan connectors on the
motherboard, making sure that the black wire of each cable matches the ground pin of
the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
•
•
Only the CPU_FAN, CHA_FAN 1 and CHA_FAN 2 connectors support the
ASUS Q FAN 2 feature.
If you install two VGA cards, we recommend that you plug the rear chassis
fan cable to the motherboard connector labled CHA_FAN1 or CHA_FAN2
for better themal environment.
ASUS M4A79 Deluxe
2-33
10. Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch. Connect
one end of the chassis intrusion sensor or switch cable to this connector. The chassis
intrusion sensor or switch sends a high-level signal to this connector when a chassis
component is removed or replaced. The signal is then generated as a chassis intrusion
event.
By default , the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper
cap. Remove the jumper caps only when you intend to use the chassis intrusion
detection feature.
Chapter 2
2-34
Chapter 2: Hardware information
ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
•
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 600 W.
•
Do not forget to connect the 8-pin EATX +12 V power plug. Otherwise, the system will
not boot.
•
We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
•
If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.
asus.com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
•
The ATX 12 V Specification 2.0-compliant (1000W) PSU has been tested to support
the motherboard power requirements with the following configuration:
CPU: AMD Phenom 9950
Memory: 1024 MB DDR2 (x4)
Graphics card: PCI Express x16 Radeon 4870 X2 (x2)
Serial ATA device: SATA hard disk drive (x2)
Optical drive: DVD-RW (x1)
ASUS M4A79 Deluxe
Chapter 2
11.
2-35
12. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
Chapter 2
2-36
•
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
•
If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Type item in the BIOS setup to [HD]; if you want to connect an AC'97
front panel audio module to this connector, set the item to [AC97]. By default, this
connector is set to [HD].
Chapter 2: Hardware information
13. System panel connector (20-8 pin PANEL)
•
This connector supports several chassis-mounted functions.
Chapter 2
System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
•
Hard disk drive activity LED (2-pin IDE_LED)
•
System warning speaker (4-pin SPEAKER)
•
ATX power button/soft-off button (2-pin PWRSW)
•
Reset button (2-pin RESET)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The IDE LED lights up or flashes when data is read from or written to
the HDD.
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
This connector is for the system power button. Pressing the power button turns the
system on or puts the system in sleep or soft-off mode depending on the BIOS settings.
Pressing the power switch for more than four seconds while the system is ON turns the
system OFF.
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
ASUS M4A79 Deluxe
2-37
14. ASUS Q-Connector (system panel)
Use the ASUS Q-Connector to connect/disconnect the chassis front panel cables. Refer to
the following instructions to install the ASUS Q-Connector.
1.
Connect the front panel cables to the ASUS
Q-Connector.
Refer to the labels on the Q-Connector to
know the detailed pin definitions, and then
match them to their respective front panel
cable labels.
The labels on the front panel cables
may vary depending on the chassis
model.
IDE_LED+
IDE_LED-
PWR
Ground
Reset
Chapter 2
Ground
2-38
2.
Install the ASUS Q-Connector to the system
panel connector, making sure the orientation
matches the labels on the motherboard.
3.
The front panel functions are now enabled.
The figure shows the Q-Connector is properly
installed on the motherboard.
IDE_LED
R SW
POWE
RESET
SW
Chapter 2: Hardware information
2.9
Starting up for the first time
1.
After making all the connections, replace the system case cover.
3.
Connect the power cord to the power connector at the back of the system chassis.
4.
5.
6.
Be sure that all switches are off.
Connect the power cord to a power outlet that is equipped with a surge protector.
Turn on the devices in the following order:
a.
Monitor
c.
System power
b.
External SCSI devices (starting with the last device on the chain)
After applying power, the system power LED on the system front panel case lights up.
For systems with ATX power supplies, the system LED lights up when you press the
ATX power button. If your monitor complies with the “green” standards or if it has a
“power standby” feature, the monitor LED may light up or change from orange to green
after the system LED turns on.
The system then runs the power-on self tests or POST. While the tests are running, the
BIOS beeps (see the BIOS beep codes table below) or additional messages appear on
the screen. If you do not see anything within 30 seconds from the time you turned on
the power, the system may have failed a power-on test. Check the jumper settings and
connections or call your retailer for assistance.
BIOS Beep
One short beep
One continuous beep followed by two
short beeps then a pause (repeated)
One continuous beep followed by three
short beeps
One continuous beep followed by four
short beeps
7.
Chapter 2
2.
Description
VGA detected
Quick boot set to disabled
No keyboard detected
No memory detected
No VGA detected
Hardware component failure
At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the
instructions in Chapter 3.
2.10 Turning off the computer
While the system is ON, pressing the power switch for less than four seconds puts the system
on sleep mode or soft-off mode, depending on the BIOS setting. Pressing the power switch
for more than four seconds lets the system enter the soft-off mode regardless of the BIOS
setting. Refer to section 3.7 Power Menu in Chapter 3 for details.
ASUS M4A79 Deluxe
2-39
Chapter 2
2-40
Chapter 2: Hardware information
Chapter 3
Chapter 3:
3.1
Knowing BIOS
BIOS setup
BIOS (Basic Input and Output System) stores system hardware settings such as storage
device configuration, overclocking settings, advanced power management, and boot device
configuration that are needed for system startup in the motherboard CMOS. In normal
circumstances, the default BIOS settings apply to most conditions to ensure optimum
performance. We recommend that you not change the default BIOS settings except in
the following circumstances:
•
•
An error message appears on the screen during the system bootup and requests you to
run the BIOS Setup.
You have installed a new system component that requires further BIOS settings or
update.
Inappropriate settings of the BIOS may result to instability or failure to boot. We strongly
recommend that you change the BIOS settings only with the help of a trained service
personnel.
3.2
Updating BIOS
The ASUS website publishes the latest BIOS versions to provide enhancements on system
stability, compatibility, or performance. However, BIOS updating is potentially risky. If there
is no problem using the current version of BIOS, DO NOT manually update the BIOS.
Inappropriate BIOS updating may result in the system’s failure to boot. Carefully follow the
instructions of this chapter to update your BIOS if necessary.
Chapter 3
Visit the ASUS website (www.asus.com) to download the latest BIOS file for this
motherboard.
The following utilities allow you to manage and update the motherboard BIOS setup program.
1.
ASUS Update: Updates the BIOS in Windows® environment.
3.
ASUS CrashFree BIOS 2: Updates the BIOS using a bootable floppy disk or the
motherboard support DVD when the BIOS file fails or gets corrupted.
2.
ASUS EZ Flash 2: Updates the BIOS using a floppy disk or USB flash disk.
Refer to the corresponding sections for details on these utilities.
Save a copy of the original motherboard BIOS file to a bootable floppy disk or USB flash
disk in case you need to restore the BIOS in the future. Copy the original motherboard
BIOS using the ASUS Update utility.
ASUS M4A79 Deluxe
3-1
3.2.1
ASUS Update utility
The ASUS Update is a utility that allows you to manage, save, and update the motherboard
BIOS in Windows® environment. The ASUS Update utility allows you to:
•
Save the current BIOS file
•
Update the BIOS from an updated BIOS file
•
•
•
Download the latest BIOS file from the Internet
Update the BIOS directly from the Internet
View the BIOS version information
This utility is available in the support DVD that comes with the motherboard package.
ASUS Update requires an Internet connection either through a network or an Internet
Service Provider (ISP).
Installing ASUS Update
To install ASUS Update:
1.
Place the support DVD in the optical drive.
3.
The ASUS Update utility is copied to your system.
2.
From the Main menu, click the Utilities tab, then click Install ASUS Update VX.XX.XX.
Quit all Windows® applications before you update the BIOS using this utility.
Updating the BIOS through the Internet
Chapter 3
To update the BIOS through the Internet:
1.
3-2
From the Windows® desktop, click
Start > Programs > ASUS >
ASUSUpdate > ASUSUpdate. The
ASUS Update main window appears.
2.
Select Update BIOS from the
Internet from the drop‑down menu,
and then click Next.
Chapter 3: BIOS setup
3.
Select the ASUS FTP site nearest
you to avoid network traffic, or click
Auto Select. Click Next.
4.
From the FTP site, select the BIOS
version that you wish to download. Click
Next.
5.
Follow the onscreen instructions to complete the update process.
The ASUS Update utility is capable of updating itself through the Internet. Always update
the utility to avail all its features.
Updating the BIOS through a BIOS file
To update the BIOS through a BIOS file:
2.
Fom the Windows® desktop, click
Start > Programs > ASUS >
ASUSUpdate > ASUSUpdate. The
ASUS Update main window appears.
Select Update BIOS from a file
from the dropdown menu, then click
Next.
3.
4.
Locate the BIOS file from the Open
window, then click Open.
Chapter 3
1.
Follow the onscreen instructions to
complete the update process.
M4a79dlx.ROM
M4a79dlx
Ensure to load the BIOS default
settings to ensure system
compatibility and stability. Select the
Load Setup Defaults item under
the Exit menu. See section 3.10 Exit
Menu for details.
ASUS M4A79 Deluxe
3-3
3.2.2
1.
Creating a bootable floppy disk
Do either one of the following to create a bootable floppy disk.
DOS environment
a. Insert a 1.44MB floppy disk into the drive.
b. At the DOS prompt, type format A:/S then press <Enter>.
Windows® XP environment
a. Insert a 1.44 MB floppy disk to the floppy disk drive.
b. Click Start from the Windows® desktop, then select My Computer.
c. Select the 3 1/2 Floppy Drive icon.
d. Click File from the menu, then select Format. A Format 3 1/2 Floppy Disk
window appears.
e. Select Create an MS-DOS startup disk from the format options field, then click
Start.
Windows® Vista environment
a. Insert a formatted, high density 1.44 MB floppy disk to the floppy disk drive.
b. Click
from the Windows® desktop, then select Computer.
c. Right-click Floppy Disk Drive then click Format to display the Format 3 1/2
Floppy dialog box .
d. Select the Create an MS-DOS startup disk check box.
e. Click Start.
Chapter 3
2.
3-4
Copy the original or the latest motherboard BIOS file to the bootable floppy disk.
Chapter 3: BIOS setup
3.2.3
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a
bootable floppy disk or a DOS‑based utility. The EZ Flash 2 utility is built-in the BIOS chip so
it is accessible by pressing <Alt> + <F2> during the Power-On Self Tests (POST).
Before you start using this utility, download the latest BIOS from the ASUS website at www.
asus.com.
To update the BIOS using EZ Flash 2:
1.
Insert the floppy/USB flash disk that contains the latest BIOS file to the floppy disk
drive or the USB port, then launch EZ Flash 2 in any of these two ways:
•
•
Press <Alt> + <F2> during POST to display the following.
Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and
press <Enter> to enable it.
Press Tab to switch between drives until the correct BIOS file is found.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.34
FLASH TYPE: MXIC 25L8005
Current ROM
BOARD: M4A79 Deluxe
VER: 0302
DATE: 12/19/2008
PATH: A:\
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
Chapter 3
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
2.
When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process
and automatically reboots the system when done.
•
This function can support devices such as a USB flash disk or a floppy disk with
FAT 32/16 format and single partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Setup Defaults item under the Exit menu. See section 3.10 Exit Menu for
details.
ASUS M4A79 Deluxe
3-5
3.2.4
ASUS CrashFree BIOS 2 utility
The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS file
when it fails or gets corrupted during the updating process. You can update a corrupted BIOS
file using the motherboard support DVD or the floppy disk that contains the updated BIOS file.
Prepare the motherboard support DVD or the floppy disk containing the updated
motherboard BIOS before using this utility.
Recovering the BIOS from the support DVD
To recover the BIOS from the support DVD:
1.
Turn on the system.
3.
The utility displays the following message and automatically checks the DVD for the
BIOS file.
2.
Insert the motherboard support DVD to the optical drive.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
When found, the utility reads the BIOS file and starts flashing the corrupted BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy found!
Reading file “M4A79DLX.ROM”. Completed.
Start flashing...
Chapter 3
4.
Restart the system after the utility completes the updating process.
Recovering the BIOS from a floppy disk
To recover the BIOS from a floppy disk:
1.
Insert the floppy disk that contains BIOS file to the floppy disk drive.
3.
The utility automatically checks the devices for the BIOS file. When found, the utility
reads the BIOS file and starts flashing the corrupted BIOS file.
2.
4.
Turn on the system.
Restart the system after the utility completes the updating process.
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Setup Defaults item under the Exit menu. See section 3.10 Exit Menu for
details.
3-6
Chapter 3: BIOS setup
3.3
BIOS setup program
A BIOS Setup program is provided for BIOS item modification. When you start up the
computer, the system provides you with the opportunity to run this program. Press <Del>
during the Power-On Self-Test (POST) to enter the Setup utility. Otherwise, POST continues
with its test routines.
If you wish to enter Setup after POST, restart the system by pressing <Ctrl> + <Alt> + <Delete>,
or by pressing the reset button on the system chassis. You can also restart by turning the
system off and then back on. Do this last option only if the first two failed.
The Setup program is designed to make it as easy to use as possible. Being a menu-driven
program, it lets you scroll through the various submenus and select from the available options
using the navigation keys.
3.3.1
•
The BIOS setup screens shown in this section are for reference purposes only, and
may not exactly match what you see on your screen.
•
If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Setup Defaults
item under the Exit menu. See section 3.10 Exit Menu for details.
•
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value. See section 2.6 Jumpers for details.
BIOS menu screen
Menu items
Menu bar Configuration fields
General help
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
Primary IDE Master
Primary IDE Slave
SATA1
SATA2
SATA3
SATA4
SATA5
ESATA
Storage Configuration
[13:51:25]
[Mon 12/22/2008]
[1.44M, 3.5 in.]
[English]
[Not Detected]
[Not Detected]
[HDT722516DLA380]
[Not Detected]
[ATAPI DVD DH1]
[Not Detected]
[Not Detected]
[Not Detected]
System Information
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure the System
Time.
Chapter 3
System Time
System Date
Legacy Diskette A
Language
Select Screen
Select Item
Field
Tab Select Field
F1 General Help
F10
Save and Exit
ESC
Exit
+- Change
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Submenu items
3.3.2
Navigation keys
Menu bar
The menu bar on top of the screen has the following main items:
Main
For changing the basic system configuration
Advanced
For changing the advanced system settings
Ai Tweaker
Power
Boot
Tools
Exit
For changing the overclocking settings
For changing the advanced power management (APM) configuration
For changing the system boot configuration
For configuring options for special functions
For selecting the exit options and loading default settings
ASUS M4A79 Deluxe
3-7
3.3.3
Navigation keys
At the bottom right corner of a menu screen are the navigation keys for that particular menu.
Use the navigation keys to select items in the menu and change the settings.
The navigation keys may differ from one screen to another.
3.3.4
Menu items
The highlighted item on the menu bar displays the specific items for that menu. For example,
selecting Main shows the Main menu items.
The other items (Advanced, Power, Boot, and Exit) on the menu bar have their respective
menu items.
3.3.5
Submenu items
A solid triangle before each item on any menu screen means that the iteam has a submenu.
To display the submenu, select the item and press <Enter>.
3.3.6
Configuration fields
These fields show the values for the menu items. If an item is user-configurable, you can
change the value of the field opposite the item. You cannot select an item that is not userconfigurable.
A configurable field is enclosed in brackets, and is highlighted when selected. To change the
value of a field, select it then press <Enter> to display a list of options. Refer to 3.3.7 Pop-up
window.
Chapter 3
3.3.7
Pop-up window
Select a menu item then press <Enter> to
display a pop-up window with the configuration
options for that item.
3.3.8
Scroll bar
A scroll bar appears on the right side of a menu
screen when there are items that do not fit on
the screen. Press the Up/Down arrow keys or
<Page Up> / <Page Down> keys to display the
other items on the screen.
3.3.9
Pop-up window
Scroll bar
General help
At the top right corner of the menu screen is a brief description of the selected item.
3-8
Chapter 3: BIOS setup
3.4
Main menu
When you enter the BIOS Setup program, the Main menu screen appears, giving you an
overview of the basic system information. You can set the system time and date, BIOS
language, and the type of floppy drive installed.
Refer to 3.3.1 BIOS menu screen for information on the menu screen items and how to
navigate through them.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
System Time
System Date
Legacy Diskette A
Language
Primary IDE Master
Primary IDE Slave
SATA1
SATA2
SATA3
SATA4
SATA5
ESATA
Storage Configuration
[10:55:25]
[Mon 12/22/2008] [1.44M, 3.5 in.]
[English]
[Not Detected]
[Not Detected]
[HDT722516DLA380]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
System Information
Use [ENTER], [TAB] or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure System Time.
Select Screen
Select Item
Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
+- Change
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
3.4.1
Primary IDE Master/Slave; SATA 1-5; ESATA
Chapter 3
While entering Setup, the BIOS automatically detects the presence of IDE/SATA devices.
There is a separate submenu for each IDE/SATA device. Select a device item then press
<Enter> to display the SATA device information.
BIOS SETUP UTILITY
Main
Primary IDE Master
Device : Hard Disk
Vendor : WDC WD800JD-00LSA0
Size : 80.0GB
LBA Mode : Supported
Block Mode : 16 Sectors
PIO Mode : 4
Async DMA : MultiWord DMA-2
Ultra DMA : Ultra DMA-5
SMART Monitoring: Supported
Type
[Auto]
LBA/Large Mode
[Auto]
Block(Multi-sector Transfer)M
[Auto]
PIO Mode
[Auto]
DMA Mode
[Auto]
SMART Monitoring
[Auto]
32Bit Data Transfer
[Enabled]
Select the type of
device connected to
the system.
Select Screen
Select Item
+- Change Option
F1 General Help
F10
Save and Exit
ESC
Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size,
LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring). These
values are not user-configurable. These items show N/A if no IDE device is installed in the
system.
ASUS M4A79 Deluxe
3-9
Type [Auto]
Allows you to select the type of IDE drive installed.
[Not Installed]
[Auto]
[CDROM]
[ARMD]
Select this option if no IDE drive is installed.
Allows automatic selection of the appropriate IDE device type.
Select this option if you are specifically configuring a CD-ROM drive.
Select [ARMD] (ATAPI Removable Media Device) if your device is either a
ZIP, LS-120, or MO drive.
This item appears in Primary IDE Master/Slave and ESATA only.
LBA/Large Mode [Auto]
Enables or disables the LBA (Logical Block Addressing) mode.
[Auto]
[Disabled]
Select [Auto] to enable the LBA mode (Logical Block Addressing mode)
if the device supports this mode, and if the device was not previously
formatted with LBA mode disabled.
Disables this function.
Block (Multi-Sector Transfer) M [Auto]
Enables or disables data multi-sectors transfers.
[Auto]
[Disabled]
When set to [Auto], the data transfer from and to the device occurs in
multiple sectors at a time if the device supports multi-sector transfer feature.
When set to [Disabled], the data transfer from and to the device occurs one
sector at a time.
Chapter 3
PIO Mode [Auto]
[Auto]Allows automatic selection of the PIO (Programmed input/output) modes,
which correspond to different data transfer rates.
[0] [1] [2] [3] [4]Set the PIO mode to Mode 0, 1, 2, 3, or 4.
DMA Mode [Auto]
DMA (Direct Memory Access) allows your computer to transfer data to and from the hardware
devices installed with much less CPU overhead.
The DMA mode consists of SDMA (single-word DMA), MDMA (multi-word DMA), and UDMA
(Ultra DMA). Setting to [Auto] allows automatic selection of the DMA mode.
SMART Monitoring [Auto]
[Auto]Allows automatic selection of the S.M.A.R.T (Smart Monitoring, Analysis,
and Reporting Technology).
[Enabled]Enables the S.M.A.R.T feature.
[Disabled]Disables the S.M.A.R.T feature.
3-10
Chapter 3: BIOS setup
32Bit Data Transfer [Enabled]
[Enabled]Sets the IDE controller to combine two 16-bit reads from the hard disk
into a single 32-bit double word transfer to the processor. This makes
more efficient use of the PCI bus as fewer transactions are needed for the
transfer of a particular amount of data.
[Disabled]Disables this function.
3.4.2
Storage Configuration
The Storage Configuration menu allows you to configure your storage devices. Select an item
then press <Enter> to display the submenu.
BIOS SETUP UTILITY
Main
Storage Configuration
OnChip SATA Channel
OnChip SATA Type
Options
[Enabled]
[IDE]
Disabled
Enabled
OnChip SATA Channel [Enabled]
[Enabled]
[Disabled]
Enables the onboard channel SATA port.
Disables the onboard channel SATA port.
Chapter 3
The following item appears only when you enable Onchip SATA Channel.
OnChip SATA Type [IDE]
Allows you to set the SATA configuration. This item appears only when you enable the
OnChip SATA Channel item.
[IDE]
[RAID]
[AHCI]
Set to [IDE] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
Set to [RAID] when you want to create a RAID configuration from the SATA
hard disk drives.
Set to [AHCI] mode when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the onboard
storage driver to enable advanced Serial ATA features that increases
storage performance on random workloads by allowing the drive to
internally optimize the order of commands.
When this item is set to [AHCI], only SATA connectors 1–4 can be detected. Ensure that
you’ve installed the AHCI driver, so that you could use SATA connectors 1–5 and E-SATA
connector in AHCI mode under OS.
ASUS M4A79 Deluxe
3-11
3.4.3
System Information
This menu gives you an overview of the general system specifications. The BIOS automatically
detects the BIOS information, CPU specification, and system memory in this menu.
BIOS SETUP UTILITY
Main
BIOS Information
Version : 0302
Build Date: 12/19/08
Processor
Type : AMD Phenom(tm) 8600 Triple-Core
Processor
Speed : 2300MHz
System Memory
Usable Size : 1024MB
3.5
Ai Tweaker menu
The Ai (Extreme) Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this chapter vary depending on the CPU and DIMM model you
installed on the motherboard.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
Configure System Frequency/Voltage
Chapter 3
AI Overclocking Tuner
[Auto]
DRAM Frequency Control
[Auto]
HT Link Speed
[Auto]
******* Please key in numbers directly! *******
CPU Voltage
[Auto]
CPU/NB Voltage
[Auto]
CPU VDDA Voltage
[Auto]
DRAM Voltage
[Auto]
HT Voltage
[Auto]
NB Voltage
[Auto]
NB 1.8V Voltage
[Auto]
SB Voltage
[Auto]
***********************************************
CPU Spread Spectrum
[Enabled]
PCIE Spread Spectrum
[Enabled]
Select the target CPU
frequency, and the
relevant parameters
will be auto-adjusted.
Frequencies higher
than CPU manufacturer
recommends are not
guaranteed to be
stable. If the system
becomes unstable,
return to the default.
Select Screen
Select Item
+- Change Option
F1 General Help
F10
Save and Exit
ESC
Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
3.5.1
AI Overclocking Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking configuration options:
3-12
Manual
Allows you to individually set overclocking parameters.
Auto
Loads the optimal settings for the system.
Chapter 3: BIOS setup
The following three items appear only when you set the AI Overclocking Tuner item to
[Manual].
3.5.2
CPU Ratio [Auto]
Allows you to set the ratio between the CPU Core Clock and the FSB Frequency. Use <+>
and <-> to adjust the ratio. The valid value ranges vary according to your CPU model.
3.5.3
FSB Frequency [XXX]
Displays the frequency sent by the clock generator to the system bus and PCI bus. Use
the <+> and <-> keys to adjust the FSB frequency. You can also key in the desired FSB
frequency using the numeric keypad. The values range from 200 to 600.
3.5.4
PCIE Frequency [XXX]
Use the <+> and <-> keys to adjust the PCIE frequency. You can also key in the desired
value using the numeric keypad. The values range from 100 to 150.
3.5.5
DRAM Frequency Control [Auto]
Allows you to select the DRAM frequency programming method.
[Auto]
[Manual]
Allows the BIOS to set DRAM frequency automatically.
Allows you to select the DRAM frequency from any of the standard values.
The following item appears only when you set the DRAM Frequncy Control item to
[Manual].
Chapter 3
DRAM Frequency [667MHz]
Allows you to set the DDR2 operating frequency.
Configuration options: [667MHz] [800MHz] [1066MHz]
The DRAM Frequency configuration options vary with the FSB Frequency settings.
Selecting a very high DRAM frequency may cause the system to become unstable! If this
happens, revert to the default setting.
The following item appears only when you set the AI Overclocking Tuner item to [Manual].
3.5.6
CPU/NB Frequency [Auto]
Allows you to select the CPU/NB frequency.
Configuration options: [Auto] [800MHz] [1000MHz] [1200MHz] [1400MHz] [1600MHz]
[1800MHz]
ASUS M4A79 Deluxe
3-13
3.5.7
HT Link Speed [Auto]
Allows you to select the HyperTransport link speed.
Configuration options: [Auto] [200MHz] [400MHz] [600MHz] [800MHz] [1 GHz] [1.2 GHz]
[1.4 GHz] [1.6 GHz] [1.8 GHz]
The following two items appear only when you set the AI Overclocking Tuner item to
[Manual].
3.5.8
Memory Configuration
Ai Tweaker
Memory Configuration
Bank Interleaving
Channel Interleaving
MemClk Tristate C3/ATLVID
Memory Hole Remapping
DCT Unganged Mode
Power Down Enable
[Auto]
[XOR of Address bit]
[Disabled]
[Enabled]
[Auto]
[Disabled]
Enable Bank Memory
Interleavng.
Bank Interleaving [Auto]
Configuration options: [Disabled] [Auto]
Channel Interleaving [XOR of Address bit]
Configuration options: [Disabled] [Address bits 6] [Address bits 12]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]
Chapter 3
MemClk Tristate C3/ATLVID [Disabled]
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Configuration options: [Disabled] [Enabled]
DRAM Unganged Mode [Auto]
Configuration options: [Auto] [Enabled] [Disabled]
Power Down Enable [Disabled]
Enables or disables the DDR power down mode.
Configuration options: [Disabled] [Enabled]
Power Down Mode [Channel]
Allows you to set the DDR power down mode. This item appears only when you enable
the previous item. Configuration options: [Channel] [Chip Select]
3-14
Chapter 3: BIOS setup
3.5.9
DRAM Timing Configuration
Ai Tweaker
DRAM Timing Configuration
DRAM Command Rate
DRAM Timing Mode
[Auto]
[Auto]
DCT0/DCT1 Strength Config.
[Auto]
DRAM Command Rate:
1T: DRAM address and
control signals are
driven for one MEMCLK
cycle.
The configuration options for some of the following items vary depending on the DIMMs
you install on the motherboard.
DRAM Command Rate [Auto]
Configuration options: [Auto] [1T] [2T]
DRAM Timing Mode [Auto]
Configuration options: [Auto] [Both]
The following sub-items appear only when you set the DRAM Timing Mode item to [Both].
TCL [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] [7 CLK DH_Only]
TRCD [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRP [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
Chapter 3
TRTP [Auto]
Specifies the read CAS# to precharge time.
Configuration options: [Auto] [2-4 CLK] [3-5 CLK]
TRAS [Auto]
Configuration options: [Auto] [5 CLK] [6 CLK] – [17 CLK] [18 CLK]
TRC [Auto]
Configuration options: [Auto]
TWR [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRRD [Auto]
Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK]
TWTR [Auto]
Specifies the write to read delay when accessing the same DIMM.
Configuration options: [Auto] [1 CLK] [2 CLK] [3 CLK]
TRFC0/TRFC1 [Auto]
Configuration options: [Auto] [75ns] [105ns] [127.5ns] [195ns] [327.5ns]
DCT0/DCT1 Strength Config. [Auto]
Configuration options: [Auto] [DCT 0] [DCT 1] [Both]
ASUS M4A79 Deluxe
3-15
3.5.10
CPU Voltage [Auto]
Allows selection of the processor Voltage. The values range from 0.8000V to 1.90V* with a
0.0125V interval.
3.5.11
CPU/NB Voltage [Auto]
Allows selection of the CPU/NB Voltage. The values range from 0.8000V to 1.90V* with a
0.0125V interval.
3.5.12
•
The value [1.90V] is supported only if the OV_CPU jumper is enabled. Otherwise,
the maximum voltage supported is [1.70V]. See 2. CPU overvoltage setting on page
2-22 for details.
•
The supported voltage may vary by CPU models.
CPU VDDA Voltage [Auto]
Allows you to select the CPU VDDA voltage.
Configuration options: [Auto] [2.50V] [2.60V] [2.70V] [2.80V]
3.5.13
DRAM Voltage [Auto]
Allows you to select the DDR2 reference voltage. The values range from 1.80V to 2.50V with
a 0.02V interval.
3.5.14
HT Voltage [Auto]
Chapter 3
Allows you to select the HyperTransport voltage. The values range from 1.20V to 1.50V with
a 0.02V interval.
3.5.15
NB Voltage [Auto]
Allows you to select the Northbridge voltage. The values range from 1.10V to 1.40V with a
0.02V interval.
3.5.16
NB 1.8V Voltage [Auto]
Allows you to select the Northbridge 1.8V voltage using the numeric keypad.
Configuration options: [Auto] [1.80V] [2.00V]
3.5.17
SB Voltage [Auto]
Allows you to select the Southbridge voltage using the numeric keypad.
Configuration options: [Auto] [1.20V] [1.35V]
3-16
•
Setting the above voltages to a high level may damage the CPU, memory module,
and chipset permanently. Proceed with caution.
•
The system may require a better cooling system to work stably under high voltage
settings.
Chapter 3: BIOS setup
3.5.18
[Disabled]
[Enabled]
3.5.19
[Disabled]
[Enabled]
CPU Spread Spectrum [Enabled]
Enhances the CPU overclocking ability.
Sets to [Enabled] for EMI control.
PCIE Spread Spectrum [Enabled]
Enhances the PCIE overclocking ability.
Sets to [Enabled] for EMI control.
The following item appears only when you set the Ai Overclocking item to [Manual].
3.5.20
AI Clock Skew for Channel A/B [Auto]
Configuration options: [Auto] [Advance 900ps] [Advance 750ps] [Advance 600ps] [Advance
450ps] [Advance 300ps] [Advance 150ps] [Normal] [Delay 150ps]
[Delay 300ps] [Delay 450ps] [Delay 600ps] [Delay 750ps] [Delay 900ps]
Chapter 3
Current Clock Skew [Advance300ps]
This item shows the current clock skew for channel A/B.
ASUS M4A79 Deluxe
3-17
3.6
Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system
devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect field values
can cause the system to malfunction.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
CPU Configuration
Chipset
Onboard Devices Configuration
USB Configuration
PCIPnP
Configure CPU.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Chapter 3
3-18
Chapter 3: BIOS setup
3.6.1
CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
The items shown in this screen may be different due to the CPU you installed.
BIOS SETUP UTILITY
Advanced
CPU Configuration
Module Version: 13.40
AGESA Version:3.3.1.0
AMD Phenom(tm) 8600 Triple-Core Processor
Revision: B2
Cache L1: 384KB
Cache L2: 1536KB
Cache L3: 2MB
Speed : 2300MHz, NB Clk: 1800MHz
Able to Change Freq. : Yes
uCode Patch Level : 0x100008D
GART Error Reporting
[Disabled]
Microcode Updation
[Enabled]
Secure Virtual Machine Mode [Enabled]
Cool ‘n’ Quiet
[Disabled]
ACPI SRAT Table
[Enabled]
CPU Prefetching
[Enabled]
C1E Support
[Disabled]
This option should
remain disabled for
the normal operation.
The driver developer
may enable it for
testing purpose.
GART Error Reporting [Disabled]
[Disabled]
[Enabled]
Disables the GART Error Reporting function.
Enables the GART Error Reporting function.
Microcode Updation [Enabled]
Disables the Microcode Updation function.
Allows the system to update the Microcode automatically, enhancing
system performance.
Chapter 3
[Disabled]
[Enabled]
Secure Virtual Machine Mode [Enabled]
[Disabled]
[Enabled]
Disables the AMD Secure Virtual Machine mode.
Enables the AMD Secure Virtual Machine mode.
Cool‘n’Quiet [Disabled]
[Disabled]
[Enabled]
Disables the AMD Cool’n’Quiet function.
Enables the AMD Cool’n’Quiet function.
ACPI SRAT Table [Enabled]
[Disabled]
[Enabled]
Disables the building of ACPI SRAT Table.
Enables the building of ACPI SRAT Table.
CPU Prefetching [Enabled]
[Disabled]
[Enabled]
Disables the CPU prefetching.
Enables the CPU prefetching.
C1E Support [Disabled]
[Disabled]
[Enabled]
Disables the the Enhanced Halt State support.
Enables the the Enhanced Halt State support.
ASUS M4A79 Deluxe
3-19
3.6.2
Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then
press <Enter> to display the submenu.
BIOS SETUP UTILITY
Advanced
Advanced Chipset Settings
Options for NB
NorthBridge Configuration
RD790 Configuration
North Bridge Chipset Configuration
BIOS SETUP UTILITY
Advanced
NorthBridge Chipset Configuration
ECC Configuration
Set the ECC options
for cache and dram
scrubbing.
ECC Configuration
BIOS SETUP UTILITY
Advanced
ECC Configuration
ECC Mode
DRAM ECC Enable
DRAM SCRUB REDIRECT
4-Bit ECC Mode
DRAM BG Scrub
Data Cache BG Scrub
L2 Cache BG Scrub
L3 Cache BG Scrub
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Set the level of ECC
protection. Note: The ‘Super’ ECC mode
dynamically sets the DRAM scrub rate so
all of memory is
scrubbed in 8 hours.
Chapter 3
ECC Mode [Disabled]
Disables or sets the DRAM ECC mode that allows the hardware to report and correct
memory errors.
[Disabled]
[Basic]
[Good]
[Super]
[Max]
[User]
3-20
Disables the DRAM ECC mode.
Set to [Basic] to adjust ECC mode automatically.
Set to [Good] to adjust ECC mode automatically.
Set to [Super] to adjust the DRAM BG Scrub sub-item manually.
Set to [Max] to adjust ECC mode automatically.
Set to [User] to adjust all the subitems manually.
Chapter 3: BIOS setup
RD790 Configuration
BIOS SETUP UTILITY
Advanced
RD790 Configuration
PCI Express Configuration
PCI Express
Configuration
PCI Express Configuration
BIOS SETUP UTILITY
Advanced
PCI Express Configuration
GFX Dual Slot Configuration
[Auto]
GFX2 Dual Slot Configuration
[Auto]
Peer-to-Peer among GFX/GFX2 [Disabled]
GPP Slots Power Limit, W [25]
Options
Auto
Enable
Disabled
ASUS M4A79 Deluxe
Chapter 3
GFX Dual Slot Configuration [Auto]
[Auto]
Switches the PCIe lane of the PCIEX16_1 and PCIEX16_2 slots
automatically.
[Enable] Sets the PCIe lane of the PCIEX16_1 and PCIEX16_2 slots to x8/x8 links.
[Disabled] Sets the PCIe lane of the PCIEX16_1 and PCIEX16_2 slots to x16/x1
links.
GFX2 Dual Slot Configuration [Auto]
[Auto]
Switches the PCIe lane of the PCIEX16_3 and PCIEX16_4 slots
automatically.
[Enable] Sets the PCIe lane of the PCIEX16_3 and PCIEX16_4 slots to x8/x8 links.
[Disabled] Sets the PCIe lane of the PCIEX16_3 and PCIEX16_4 slots to x16/x1
links.
Peer-to-Peer among GFX/GFX2 [Disabled]
[Enable] Enhances the link speed between GFX and GFX2 slots when two or more
PCIe devices are installed.
[Disabled] Disables this function.
GPP Slots Power Limit, W [25]
Use the <+> and <-> keys to change the value or type the desired value using the
numeric keypad. The values range from 0 to 255.
3-21
3.6.3
Onboard Devices Configuration
BIOS SETUP UTILITY
Advanced
On Board Devices Configuration
High Definition Audio
Front Panel Type
SPDIF_OUT Mode Setting
[Enabled]
[HD]
[SPDIF Output]
Onboard LAN
OnBoard LAN Boot ROM
Firewire 1394
Serial Port1 Address
[Enabled]
[Disabled]
[Enabled]
[3F8/IRQ4]
Options
Disabled
Enabled
High Definition Audio [Enabled]
[Enabled]
[Disabled]
Enables the High Definition Audio Controller.
Disables the controller.
The following two items appear only when you set the High Definition Audio item to
[Enabled].
Front Panel Type [HD]
[AC 97]
[HD]
Sets the front panel audio connector (AAFP) mode to legacy AC’97.
Sets the front panel audio connector (AAFP) mode to high definition audio.
SPDIF_OUT Mode Setting [SPDIF Output]
If your graphics card has HDMI output and needs to use SPDIF signal from the SPDIF_Out
header, you need to set to HDMI Output for HDMI audio output.
Chapter 3
[SPDIF Output] Sets [SPDIF Output] for SPDIF audio output.
[HDMI Output] Sets to [HDMI Output] for HDMI audio output.
Onboard LAN [Enabled]
[Enabled]
[Disabled]
Enables the onboard LAN controller.
Disables the onboard controller.
The following item appears only when you set the Onboard LAN item to [Enabled].
Onboard LAN Boot ROM [Disabled]
[Enabled] Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.
Firewire 1394 [Enabled]
[Enabled]
[Disabled]
Enables the onboard 1394 device support.
Disables the onboard 1394 device support.
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
3-22
Chapter 3: BIOS setup
3.6.4
USB Configuration
The items in this menu allows you to change the USB-related features. Select an item then
press <Enter> to display the configuration options.
BIOS SETUP UTILITY
Advanced
USB Configuration
Module Version - 2.24.3-13.4
Enable support for
all
USB ports.
Enable
support for
all USB ports
USB Devices Enabled:
None
USB Support
Legacy USB Support USB 2.0 Controller
USB 2.0 Controller Mode
BIOS EHCI Hand-Off [Enabled]
[Enabled]
[Enabled]
[HiSpeed]
[Enabled]
The USB Devices Enabled item shows the auto-detected values. If no USB device is
detected, the item shows None.
USB Support [Enabled]
[Enabled]
[Disabled]
Enables the USB Host Controllers.
Disables the controllers.
The following items appear only when you set USB Support to [Enabled].
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Enables the support for USB devices on legacy operating systems (OS).
Disables the function.
Chapter 3
[Auto]
USB 2.0 Controller [Enabled]
[Enabled]
[Disabled]
Enables the USB 2.0 controller.
Disables the controller.
The following two items appear only when you set the USB 2.0 Controller item to
[Enabled].
USB 2.0 Controller Mode [HiSpeed]
[FullSpeed]
[HiSpeed]
Sets the USB 2.0 controller mode to FullSpeed (12 Mbps).
Sets the USB 2.0 controller mode to HiSpeed (480 Mbps).
BIOS EHCI Hand-off [Enabled]
[Enabled]
[Disabled]
Enables the support for operating systems without an EHCI hand‑off
feature.
Disables the function.
ASUS M4A79 Deluxe
3-23
3.6.5
PCIPnP
The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.
BIOS SETUP UTILITY
Advanced
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug And Play O/S
[No]
NO: lets the BIOS
configure all the
devices in the system.
YES: lets the
operating system
configure Plug and Play (PnP) devices not
required for boot if
your system has a Plug
and Play operating
system.
Plug And Play O/S [No]
[Yes]
[No]
When set to [Yes] and if you install a Plug and Play operating system, the
operating system configures the Plug and Play devices not required for
boot.
When set to [No], BIOS configures all the devices in the system.
Chapter 3
3-24
Chapter 3: BIOS setup
3.7
Power menu
The Power menu items allow you to change the settings for the Advanced Power
Management (APM). Select an item then press <Enter> to display the configuration options.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
Suspend Mode
Repost Video on S3 Resume
ACPI 2.0 Support
ACPI APIC Support
[Auto]
[No]
[Disabled]
[Enabled]
Select the ACPI state
used for System
Suspend.
APM Configuration
Hardware Monitor
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
3.7.1
Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend.
[Auto]The system automatically configures the ACPI suspend mode.
[S1 (POS) only] Sets the APCI suspend mode to S1/POS (Power On Suspend).
[S3 only]
Sets the APCI suspend mode to S3/STR (Suspend To RAM).
3.7.2
Repost Video on S3 Resume [No]
Chapter 3
Determines whether to invoke VGA BIOS POST on S3/STR resume.
[No]When set to [No], the system will not invoke VGA BIOS POST on S3/STR
resume.
[Yes]When set to [Yes], the system invokes VGA BIOS POST on S3/STR
resume.
3.7.3
[Disabled]
[Enabled]
3.7.4
ACPI 2.0 Support [Disabled]
When set to [Disabled], the system will not add additional tables as per
ACPI 2.0 specifications.
When set to [Enabled], the system adds additional tables as per ACPI 2.0
specifications.
ACPI APIC Support [Enabled]
[Disabled]When set to [Disabled], the system disable the Advanced Configuration and
Power Interface (ACPI) support in the Advanced Programmable Interrupt
Controller (APIC).
[Enabled]When set to [Enabled], the ACPI APIC table pointer is included in the RSDT
pointer list.
ASUS M4A79 Deluxe
3-25
3.7.5
APM Configuration
BIOS SETUP UTILITY
Power
APM Configuration
Restore on AC Power Loss Power On By PME
Power On By PS/2 Keyboard
Power On By PS/2 Mouse
Power On By Ring
Power On By RTC Alarm
Options
[Power Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Power On
Power Off
Last State
Restore On AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By PME [Disabled]
[Disabled]
[Enabled]
Disables the PME to wake up from S5 by PCI/PCIE/onboard LAN devices.
Allows you to turn on the system through a PCI/PCIE/onboard LAN device.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Power On By PS/2 Keyboard [Disabled]
[Disabled]Disables the Power On by a PS/2 keyboard.
[Enabled]Sets specific keys on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Chapter 3
Power On By PS/2 Mouse [Disabled]
[Disabled]
[Enabled]
Disables the Power On by a PS/2 mouse.
Enables the Power On by a PS/2 mouse. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead.
Power On By Ring [Disabled]
[Disabled]
[Enabled]
The computer could not be powered up when the external modem receives
a call while the computer is in Soft-off mode.
The computer could be powered up when the external modem receives a
call while the computer is in Soft-off mode.
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power On By RTC Alarm [Disabled]
[Disabled]
[Enabled]
3-26
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date/ RTC Alarm Time will
become user-configurable with set values.
Chapter 3: BIOS setup
3.7.6
Hardware Monitor
BIOS SETUP UTILITY
Power
Hardware Monitor
CPU Temperature
CPU Temperature
MB Temperature
[42ºC/107.5ºF]
[33ºC/91ºF]
CPU Fan Speed
Chassis Fan 1 Speed
Chassis Fan 2 Speed
[4856RPM]
[N/A]
[N/A]
VCORE Voltage
3.3V Voltage
5V Voltage
12V Voltage
[ 1.234V]
[ 3.320V]
[ 5.026V]
[11.787V]
CPU Q-Fan Function
Chassis Q-Fan Function
[Disabled]
[Disabled]
CPU/MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select Ignored if you do not wish to display the detected temperatures.
CPU Fan /Chassis Fan 1 and 2 Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU and chassis fan
speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the field
shows N/A. Select Ignored if you do not wish to display the detected speed.
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignored if you do not want to detect this item.
[Disabled]
[Enabled]
Chapter 3
CPU Q-Fan Function [Disabled]
Disables the CPU Q-Fan control feature.
Enables the CPU Q-Fan control feature.
The following two items appear only when you set CPU Q-Fan Function to [Enabled].
Select Fan Type: [PWR Fan]
[PWR Fan]Sets to [PWR Fan] when using a 4-pin CPU fan.
[DC Fan]Sets to [DC Fan] when using a 3-pin CPU fan.
Quiet CPU Fan Mode [Silent]
[Performance]
Sets to [Performance] to achieve maximum CPU fan speed.
[Optimal]Sets to [Optimal] to make the CPU fan automatically adjust
depending on the CPU temperature.
[Silent]Sets to [Silent] to minimize the fan speed for quiet CPU fan
operation.
ASUS M4A79 Deluxe
3-27
Chassis Q-Fan Function [Disabled]
[Disabled]
[Enabled]
Disables the Chassis Q-Fan control feature.
Enables the Chassis Q-Fan control feature.
The following item appears only when you set Chassis Q-Fan Function to [Enabled].
Quiet Chassis Fan Mode [Silent]
[Performance]
Sets to [Performance] to achieve maximum chassis fan speed.
[Optimal]Sets to [Optimal] to make the chassis fan automatically adjust
depending on the chassis temperature.
[Silent]
Sets to [Silent] to minimize fan speed for quiet chassis fan operation.
3.8
Boot menu
The Boot menu items allow you to change the system boot options. Select an item then press
<Enter> to display the submenu.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
Specifies the Boot
Device Boot Priority
sequence.
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
A virtual floppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the first boot
device.
Chapter 3
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
3.8.1
Boot Device Priority
BIOS SETUP UTILITY
Boot
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
[1st FLOPPY DRIVE]
[Hard Drive]
[ATAPI DVD-ROM]
1st ~ xxth Boot Device [1st FlOPPY DRIVE]
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
Configuration options: [1st FlOPPY DRIVE] [Hard Drive] [ATAPI CD-ROM] [Disabled]
3-28
Chapter 3: BIOS setup
3.8.2
Boot Settings Configuration
BIOS SETUP UTILITY
Boot
Boot Settings Configuration
Quick Boot Full Screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
Wait For ‘F1’ If Error
Hit ‘DEL’ Message Display
[Enabled]
[Enabled]
[Force BIOS]
[On]
[Enabled]
[Enabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Quick Boot [Enabled]
[Disabled]When set to [Disabled], BIOS performs all the POST items.
[Enabled]When set to [Enabled], BIOS skips some power on self tests (POST) while
booting to decrease the time needed to boot the system.
Full Screen Logo [Enabled]
[Enabled]Enables the full screen logo display feature.
[Disabled]Disables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
AddOn ROM Display Mode [Force BIOS]
[Force BIOS]
The third-party ROM messages will be forced to display during the boot
sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
[Off]
[On]
Chapter 3
Bootup Num-Lock [On]
Sets the power-on state of the NumLock to [Off].
Sets the power-on state of the NumLock to [On].
Wait For ‘F1’ If Error [Enabled]
[Disabled]
[Enabled]
Disables this function.
The system waits for the <F1> key to be pressed when error occurs.
Hit ‘DEL’ Message Display [Enabled]
[Disabled]
[Enabled]
Disables this function.
The system displays the message “Press DEL to run Setup” during POST.
ASUS M4A79 Deluxe
3-29
3.8.3
Security
The Security menu items allow you to change the system security settings. Select an item
then press <Enter> to display the configuration options.
BIOS SETUP UTILITY
Boot
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
<Enter> to change
password.
<Enter> again to
disable password.
Change Supervisor Password
Change User Passward
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor Password item
on top of the screen shows the default Not Installed. After you set a password, this item
shows Installed.
To set a Supervisor Password:
1.
2.
3.
Select the Change Supervisor Password item and press <Enter>.
From the password box, type a password composed of at least six letters and/or
numbers, then press <Enter>.
Confirm the password when prompted.
The message Password Installed appears after you successfully set your password.
To change the supervisor password, follow the same steps as in setting a user password.
To clear the supervisor password, select the Change Supervisor Password then press
<Enter>. The message Password Uninstalled appears.
Chapter 3
If you forget your BIOS password, you can clear clear it by erasing the CMOS Real Time
Clock (RTC) RAM. See section 2.6 Jumpers for information on how to erase the RTC
RAM.
After you have set a supervisor password, the other items appear to allow you to change
other security settings.
3-30
Chapter 3: BIOS setup
BIOS SETUP UTILITY
Boot
Security Settings
Supervisor Password : Installed
User Password : Installed
Change Supervisor Password
User Access Level
Change User Password
Clear User Password
Password Check
<Enter> to change
password.
<Enter> again to
disabled password.
[Full Access]
[Setup]
User Access Level [Full Access]
This item allows you to select the access restriction to the Setup items.
[No Access]
Prevents user access to the Setup utility.
[View Only]Allows access but does not allow change to any field.
[Limited]Allows changes only to selected fields, such as Date and Time.
[Full Access]
Allows viewing and changing all the fields in the Setup utility.
Change User Password
Select this item to set or change the user password. The User Password item on top of the
screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a User Password:
1.
2.
3.
Select the Change User Password item and press <Enter>.
On the password box that appears, type a password composed of at least six letters
and/or numbers, then press <Enter>.
Confirm the password when prompted.
Chapter 3
The message Password Installed appears after you set your password successfully.
To change the user password, follow the same steps as in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
[Setup]
[Always]
BIOS checks for user password when accessing the Setup utility.
BIOS checks for user password both when accessing Setup and booting
the system.
ASUS M4A79 Deluxe
3-31
3.9
Tools menu
The Tools menu items allow you to configure options for special functions. Select an item
then press <Enter> to display the submenu.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
ASUS EZ Flash 2
Express Gate Enter OS Timer
Reset User Data
Press ENTER to run the
utility to select and
update BIOS.
This utility supports:
1.FAT 12/16/32 (r/w)
2.NTFS (read only)
3.CD-DISC (read only)
[Enabled]
[10 Seconds]
[No]
ASUS O.C. Profile
AI NET 2
Select Screen
Select Item
+- Change Field
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
3.9.1
ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
confirm your choice. Check page 3-5, section 3.2.3 for details.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.34
Chapter 3
FLASH TYPE: MXIC 25L8005
Current ROM
BOARD: M4A79 Deluxe
VER: 0302
DATE: 12/19/2008
PATH: A:\
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
3-32
Chapter 3: BIOS setup
3.9.2
Express Gate
Allows you to enable or disable the ASUS Express Gate feature. The ASUS Express Gate
feature is a unique instant-on environment that provides quick access to the Internet browser
and Skype. Configuration options: [Enabled] [Disabled]
Enter OS Timer [10 Seconds]
Sets countdown duration that the system waits at the Express Gate’s first screen
before starting Windows or other installed OS. Choose [Prompt User] to stay at the first
screen of Express Gate for user action.
Configuration options: [Prompt User] [1 second] [3 seconds] [5 seconds] [10 seconds]
[15 seconds] [20 seconds] [30 seconds]
Reset User Data [No]
Allows you to clear Express Gate’s user data.
[Reset]When setting this item to [Reset], ensure that you save the setting to the
BIOS so that the user data will be cleared the next time you enter the
Express Gate. User data includes the Express Gate’s settings as well as
any personal information stored by the web browser such as bookmarks,
cookies, browsing history. This is useful in the rare case where corrupt
settings prevent the Express Gate environment from launching properly.
[No]Set to [No] to disable the Reset User Data function when entering the
Express Gate.
Chapter 3
The first time wizard will run again when you enter the Express Gate environment after
clearing its settings.
ASUS M4A79 Deluxe
3-33
3.9.3
ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
BIOS SETUP UTILITY
Tools
O.C. PROFILE Configuration
O.C.
O.C.
O.C.
O.C.
O.C.
O.C.
O.C.
O.C.
Profile
Profile
Profile
Profile
Profile
Profile
Profile
Profile
1
2
3
4
5
6
7
8
Status
Status
Status
Status
Status
Status
Status
Status
:
:
:
:
:
:
:
:
Add Your CMOS Profile.
Name:
Save To:
Load CMOS Profiles.
Load From:
Start O.C. Profile
Not
Not
Not
Not
Not
Not
Not
Not
Typing your profile
name, [0-9][a-z][AZ] are acceptable.
Installed
Installed
Installed
Installed
Installed
Installed
Installed
Installed
Select Screen
Select Item
+- Change Field
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
[Default-Profile]
[Uninstalled]
[Blank]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Add Your CMOS Profile
Allows you to save the current BIOS file to the BIOS Flash. In the Name sub-item, type your
profile name and press <Enter>, and then choose a profile number to save your CMOS
settings in the Save to sub-item.
Load CMOS Profiles
Allows you to load the previous BIOS settings saved in the BIOS Flash. Press <Enter>, and
choose a profile to load.
Start O.C. Profile
Chapter 3
Allows you to run the utility to save and load CMOS. Press <Enter> to run the utility.
ASUSTek O.C. Profile Utility V1.34
Current CMOS
BOARD: M4A79 Deluxe
VER: 0115
DATE: 12/08/2008
PATH: A:\
Restore CMOS
BOARD: Unknown
VER: Unknown
DATE: Unknown
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
3-34
Chapter 3: BIOS setup
3.9.4
•
This function can support devices such as a USB flash disk or a floppy disk with FAT
32/16 format and single partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
•
We recommend that you update the BIOS file only coming from the same memory/CPU
configuration and BIOS version.
•
Only the CMO file can be loaded.
AI NET 2
BIOS SETUP UTILITY
Tools
Check Realtek LAN
cable during POST.
AI NET 2
Pair Status Length
Check Realtek LAN cable
[Disabled]
It will take 3 to 10
seconds to diagnose
LAN cable.
Check Realtek LAN Cable [Disabled]
[Disabled]
Chapter 3
[Enabled]
BIOS will not check the Realtek LAN cable during the Power-On Self-Test
(POST).
BIOS checks the Realtek LAN cable during the Power-On Self-Test
(POST).
ASUS M4A79 Deluxe
3-35
3.10 Exit menu
The Exit menu items allow you to load the optimal or failsafe default values for the BIOS
items, and save or discard your changes to the BIOS items.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Pressing <Esc> does not immediately exit this menu. Select one of the options from this
menu or <F10> from the legend bar to exit.
Exit & Save Changes
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved to the CMOS RAM. An onboard backup battery
sustains the CMOS RAM so it stays on even when the PC is turned off. When you select this
option, a confirmation window appears. Select Ok to save changes and exit.
Chapter 3
If you attempt to exit the Setup program without saving your changes, the program prompts
you with a message asking if you want to save your changes before exiting. Press <Enter>
to save the changes while exiting.
Exit & Discard Changes
Select this option only if you do not want to save the changes that you made to the
Setup program. If you made changes to fields other than System Date, System Time, and
Password, the BIOS asks for a confirmation before exiting.
Discard Changes
This option allows you to discard the selections you made and restore the previously saved
values. After selecting this option, a confirmation appears. Select Ok to discard any changes
and load the previously saved values.
Load Setup Defaults
This option allows you to load the default values for each of the parameters on the Setup
menus. When you select this option or if you press <F5>, a confirmation window appears.
Select Ok to load default values. Select Exit & Save Changes or make other changes before
saving the values to the non-volatile RAM.
3-36
Chapter 3: BIOS setup
Chapter 4
Chapter 4:
4.1
Software support
Installing an operating system
This motherboard supports Windows® XP/ 64-bit XP/ Vista™ operating systems (OS). Always
install the latest OS version and corresponding updates to maximize the features of your
hardware.
4.2
•
Motherboard settings and hardware options vary. Use the setup procedures presented
in this chapter for reference only. Refer to your OS documentation for detailed
information.
•
Ensure that you install the Windows® XP Service Pack 2 or later versions before
installing the drivers for better compatibility and system stability.
Support DVD information
The support DVD that comes with the motherboard package contains the drivers, software
applications, and utilities that you can install to avail all motherboard features.
The contents of the support DVD are subject to change at any time without notice. Visit the
ASUS website at www.asus.com for updates.
4.2.1
Running the support DVD
Place the support DVD into the optical drive. The DVD automatically displays the Drivers menu if
Autorun is enabled in your computer. Click each menu tab and select the items you want to install.
The Drivers menu shows the
available device drivers if the
system detects installed devices.
Install the necessary drivers to
use the devices.
The Utilities
menu shows the
applications and
other software that
the motherboard
supports.
The Make disk menu
contains items to create
the ATI® RAID/AHCI
driver disk.
The Manual menu contains
the list of supplementary
user manuals. Click an item
to open the folder of the user
manual.
Click the Contact tab
to display the ASUS
contact information.
Click an icon
to display DVD/
motherboard
information
Chapter 4
Click an item to
install
If Autorun is NOT enabled in your computer, browse the contents of the support DVD to
locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run
the DVD.
ASUS M4A79 Deluxe
4-1
4.2.2
Obtaining the software manuals
The software manuals are included in the support DVD. Follow the instructions below to get
the necessary software manuals.
The software manual files are in Portable Document Format (PDF). Install the Adobe®
Acrobat® Reader from the Utilities menu before opening the files.
1.
Click the support DVD icon.
2.
The support DVD contents are
displayed in graphical format.
Double-click the Manual folder.
3.
Double-click the folder of your
selected manual.
Chapter 4
The screenshots in this section are for reference only. The actual software manuals
containing in the support DVD vary by models.
4-2
Chapter 4: Software support
4.3
Software information
Most of the applications in the support DVD have wizards that will conveniently guide you
through the installation. View the online help or readme file that came with the software
application for more information.
4.3.1
Cool ‘n’ Quiet!™ Technology
The motherboard supports the AMD Cool ‘n’ Quiet!™ Technology that dynamically and
automatically change the CPU speed, voltage, and amount of power depending on the task
the CPU performs.
Enabling Cool ‘n’ Quiet!™ Technology
1.
2.
3.
4.
Turn on the system and enter BIOS by pressing the <Del> key during the Power On
Self-Tests (POST).
Go to Advanced > CPU Configuration > Cool ‘n’Quiet and set it to [Enabled]. See
section 3.6 Advanced menu.
Save your changes and exit BIOS Setup.
Reboot your computer and set your Power Option Properties depending on your
operating system.
Launching the Cool ‘n’ Quiet!™ software
1.
Install Cool ‘n’ Quiet!™ software from the motherboard support DVD.
3.
The Cool ‘n’ Quiet!™ technology screen appears and displays the current CPU
Frequency and CPU Voltage.
Click Start > All Programs > ASUS > Cool & Quiet > Cool & Quiet.
Chapter 4
2.
Refer to the software manual in the support DVD or visit the ASUS website
at www.asus.com for detailed software configuration.
ASUS M4A79 Deluxe
4-3
4.3.2
Audio configurations
The Realtek audio CODEC provides 8-channel audio capability to deliver the ultimate audio
experience on your computer. The software provides Jack-Sensing function, S/PDIF Out
support, and interrupt capability. The CODEC also includes the Realtek® proprietary UAJ®
(Universal Audio Jack) technology for all audio ports, eliminating cable connection errors and
giving users plug and play convenience.
®
Follow the installation wizard to install the Realtek® Audio Driver from the support CD/DVD
that came with the motherboard package.
If the Realtek audio software is correctly installed, you will find
the Realtek HD Audio Manager icon on the taskbar. Doubleclick on the icon to display the Realtek HD Audio Manager.
A.
Realtek HD Audio Manager
Realtek HD Audio Manager for Windows Vista™
®
Set default device button
Configuration
option tabs
Minimize button Exit button
Device
advanced
settings
Connector
settings
Analog
and digital
connector
status
Control
settings
window
Information
button
B.
Realtek HD Audio Manager for Windows XP
Configuration
options
Control settings
window
Exit button
Minimize button
Chapter 4
Information button
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
4-4
Chapter 4: Software support
4.3.3
ASUS PC Probe II
PC Probe II is a utility that monitors the computer’s vital components, and detects and
alerts you of any problem with these components. PC Probe II senses fan rotations, CPU
temperature, and system voltages, among others. Because PC Probe II is software-based,
you can start monitoring your computer the moment you turn it on. With this utility, you are
assured that your computer is always at a healthy operating condition.
Launching PC Probe II
1.
2.
3.
Install PC Probe II from the motherboard support DVD.
Launch PC Probe II by clicking Start > All Programs > ASUS > PC Probe II > PC
Probe II v1.xx.xx. The PC Probe II main window appears.
The PC Probe II icon appears in the Windows® notification area. Click this icon to close
or restore the application.
PC Probe II main window
Button
Function
Opens the Configuration window
Opens the Report window
Opens the Desktop Management Interface window
Opens the Peripheral Component Interconnect window
Opens the Windows Management Instrumentation window
Opens the hard disk drive, memory, CPU usage window
Shows/Hides the Preference section
Chapter 4
Minimizes the application
Closes the application
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
ASUS M4A79 Deluxe
4-5
4.3.4
ASUS Express Gate SSD / ASUS Express Gate
ASUS Express Gate SSD / ASUS Express Gate is an instant-on environment that gives you
quick access to the Internet, Skype, and your pictures. Within a few seconds of powering on
your computer, you will be at the Express Gate SSD / Express Gate menu where you can
start the web browser, Skype, or other Express Gate SSD / Express Gate applications.
•
ASUS Express Gate SSD / ASUS Expess Gate supports SATA devices in IDE or SATA
mode only. See chapter 3 for the BIOS setup details.
•
ASUS Express Gate SSD / ASUS Express Gate supports SATA devices connected
to the motherboard chipset-controlled onboard SATA ports only. All onboard
extended SATA ports and external SATA ports are NOT supported. See chapter 2 for
the exact location of the onboard SATA ports.
•
Ensure to install ASUS Express Gate from the motherboard support DVD before you
start using the utility. ASUS Express Gate SSD requires no installation.
•
ASUS Express Gate supports installation on SATA HDDs, USB HDDs, and Flash
drives. When installed on USB HDDs and Flash drives, connect the drives to the
motherboard USB port before turning on the computer.
The First Screen
Express Gate’s first screen appears within a few seconds after you power on the computer.
Click any of the application
icons to enter Express Gate
environment and launch the
selected application
Turn off the computer
Enter the motherboard BIOS setup
Continue booting to existing OS
when timer counts down to zero
(0); click to immediately enter
existing OS
Chapter 4
Refer to the software manual in the support DVD or click
environment for detailed software instructions.
4-6
in the Express Gate
Chapter 4: Software support
4.3.5 ASUS AI Suite
ASUS AI Suite allows you to launch several ASUS utilities easily.
Launching AI Suite
1.
Install AI Suite from the motherboard support DVD.
2.
Launch AI Suite by clicking Start > All Programs > ASUS > AI Suite > AI Suite v1.xx.
xx. The AI Suite main window appears.
3.
The AI Suite icon
appears in the Windows® notification area. If you minimize the
application main window, click this icon to restore the window.
Using AI Suite
Click each utility button to launch the utility, or click the Normal button to restore system
default settings.
Click to open the monitor window that displays
system information such as CPU temperature,
CPU voltage, fan speed, and CPU/FSB frequency
Click to restore
default settings
•
The screenshots in this section are for reference only. The actual utility buttons vary
by models.
•
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
ASUS M4A79 Deluxe
Chapter 4
Click to launch
each utility
4-7
4.3.6
ASUS EPU
ASUS EPU is an energy-efficient tool that provides you with a total system power-saving
solution. It detects the current computer loading and intelligently adjusts the power in realtime. With auto phase switching for components, the EPU automatically provides the most
appropriate power usage via intelligent acceleration and overclocking
ASUS EPU provides you with these modes to choose from:
•
Turbo Mode
•
High Performance Mode
•
Maximum Power Saving Mode
When you select Auto Mode
, the system shifts modes automatically according to the
current system status. You can also configure advanced settings for each mode.
Launching EPU
After installing EPU from the motherboard support
DVD, double-click the EPU tray icon to launch the
program.
EPU main menu
Chapter 4
Refer to the software manual in the support DVD or visit the ASUS website
at www.asus.com for detailed software configuration.
4-8
Chapter 4: Software support
4.3.7
ASUS Q-Fan 2
This ASUS Q-Fan 2 Control feature allows you to set the appropriate performance level of the
CPU Q-Fan 2 or the Chassis Q-Fan 2 for more efficient system operation. After enabling the
Q-Fan 2 function, the fans can be set to automatically adjust depending on the temperature,
to decrease fan speed, or to achieve the maximum fan speed.
After installing AI Suite from the bundled support DVD, you can launch the utility by doubleclicking the AI Suite icon on the Windows® OS taskbar and click the Q-Fan 2 button on the
AI Suite maIn window.
Click the drop-down menu button and display the fan names. Select CPU Q-Fan 2 or
CHASSIS Q-Fan 2. Click the box of Enable Q-Fan 2 to activate this function.
Enable Q-Fan 2 box
drop-down list
button
Profile list appears after clicking the Enable Q-Fan 2 box. Click the drop-down list button and
select a profile. Optimal mode makes the fans adjust speed with the temperature; Silent mode
minimizes fan speed for quiet fan operation; Performance mode boosts the fan to achieve
maximal fan speed for the best cooling effect.
Chapter 4
click to display the
drop-down list and
select a Q-Fan 2 mode
Click Apply at the bottom to save the setup.
ASUS M4A79 Deluxe
4-9
4.3.8
ASUS AI Nap
ASUS AI Nap allows you to minimize the power consumption of your computer whenever
you are away. Enable this feature for minimum power consumption and a more quiet system
operation.
Using ASUS AI Nap
1.
2.
3.
After installing ASUS AI Suite from the
motherboard support DVD, double-click the
ASUS Q-Button icon in the Windows notification
area to launch the Q-Button user interface.
Select AI Nap, then click Apply to enable AI Nap function.
Press the power button to enter AI Nap mode.
Press the power button again to exit AI Nap mode.
Chapter 4
4-10
Chapter 4: Software support
4.3.9
ASUS TurboV
ASUS TurboV allows you to overclock the CPU frequency, CPU voltage, DRAM voltage, and
CPU/NB voltage in WIndows® environment and takes effect in real-time without exiting and
rebooting the OS.
Refer to the CPU documentation before adjusting CPU voltage settings. Setting a high
voltage may damage the CPU permanently, and setting a low voltage may make the
system unstable.
•
For system stability, all changes made in ASUS TurboV will not be saved to BIOS
settings and will not be kept on the next system boot. Use the Save Profile function
to save your customized overclocking settings and manually load the profile after
Windows starts.
•
For system stability, set ASUS EPU to High Performance Mode while using ASUS
TurboV.
Launching ASUS TurboV
1.
2.
Install the ASUS TurboV utility from the motherboard support DVD.
Click Start > All Programs > ASUS > TurboV > TurboV.
Load existing ASUS Turbo profiles. Three pre-defined profiles are
provided: “Race Car”, “Jet Plane”, and “Rocket”.
Save the current settings as a new profile
Target settings
Default
settings
Voltage
Adjustment
bars
Click to show
more settings
Adjusts CPU
core ratio
Advanced
CPU and
chipset voltage
settings
Undoes all changes
without applying
•
For advanced overclock ability, adjust first the BIOS items, and then proceed more
detailed adjustments using TurboV.
•
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
•
Only AMD® Black Edition processors support the CPU Ratio function.
•
Set the CPU Ratio item in BIOS to [Auto] before using the CPU Ratio function in
TurboV. See your motherboard manual for details.
ASUS M4A79 Deluxe
Chapter 4
Applies all changes
immediately
4-11
4.3.10
ASUS Turbo Key
ASUS Turbo Key allows the user to turn the PC power button into a physical overclocking
button. After the easy setup, Turbo Key can boost performances without interrupting ongoing
work or games—with just one touch!
Launching ASUS Turbo Key
1.
Install ASUS AI Suite from the motherboard support DVD.
3.
Double-click the ASUS Q-Button icon in the
Windows notification area to launch the Q-Button
user interface.
2.
Restart your computer. ASUS Q-Button automatically starts after Windows start-up.
Configuring ASUS Turbo Key
1
2
3
4
1.
2.
3.
4.
Select your desired power button action. Select Power to keep the power button as a
common switch. Select AI Nap to enter ASUS AI Nap mode after pressing the power
button. Select Turbo Key to boost system performance after pressing the power button.
You can choose whether to show Q-Button OSD and status by clicking the check
boxes in the Setting section.
You can decide the performance boost level by selecting Turbo Key Profile. You can
also load personal profiles saved in the ASUS TurboV utility. The default is “Rocket
Mode”. See your motherboard manual for ASUS TurboV configurations.
Click Apply for all settings to take effect.
Chapter 4
Using ASUS Turbo Key
Press the power button on your computer chassis to use the Turbo Key function defined in
the Q-Button user interface. Press the power button again to turn off the Turbo Key function.
Press and hold the power button for 4 seconds will turn off your computer.
Refer to the software manual in the support DVD or visit the ASUS website
at www.asus.com for detailed software configuration.
4-12
Chapter 4: Software support
4.4
RAID configurations
The motherboard comes with the AMD SB750 chipset that allows you to configure Serial ATA
hard disk drives as RAID sets. The motherboard supports the following RAID configurations:
RAID 0, RAID 1, RAID 5, and RAID 10.
4.4.1
RAID definitions
RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in
parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a
sustained data transfer rate, double that of a single disk alone, thus improving data access
and storage. Use of two new identical hard disk drives is required for this setup.
RAID 1 (Data mirroring) copies and maintains an identical image of data from one drive to
a second drive. If one drive fails, the disk array management software directs all applications
to the surviving drive as it contains a complete copy of the data in the other drive. This RAID
configuration provides data protection and increases fault tolerance to the entire system. Use
two new drives or use an existing drive and a new drive for this setup. The new drive must be
of the same size or larger than the existing drive.
RAID 5 stripes both data and parity information across three or more hard disk drives. Among
the advantages of RAID 5 configuration include better HDD performance, fault tolerance, and
higher storage capacity. The RAID 5 configuration is best suited for transaction processing,
relational database applications, enterprise resource planning, and other business systems.
Use a minimum of three identical hard disk drives for this setup.
RAID 10 is data striping and data mirroring combined without parity (redundancy data) having
to be calculated and written. With the RAID 0+1 configuration you get all the benefits of both
RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive
and three new drives for this setup.
Chapter 4
For Windows XP, If you want to boot the system from a hard disk drive included in a RAID
set, first copy the RAID driver from the support DVD to a floppy disk before you install an
operating system to a selected hard disk drive. Refer to section 4.4 Creating a RAID driver
disk for details.
ASUS M4A79 Deluxe
4-13
4.4.2
Installing Serial ATA hard disks
The motherboard supports Serial ATA hard disk drives. For optimal performance, install
identical drives of the same model and capacity when creating a disk array.
To install the SATA hard disks for a RAID configuration:
1.
Install the SATA hard disks into the drive bays.
3.
Connect a SATA power cable to the power connector on each drive.
2.
Connect the SATA signal cables.
4.4.3
AMD® RAID configurations
This motherboard supports RAID 0, RAID 1, RAID 5, and RAID 10 configurations for Serial
ATA hard disks drives through the AMD SB750 chip.
Setting the RAID item in BIOS
You must set the RAID item in the BIOS Setup before you can create a RAID set. To do this:
1.
2. 3.
3.
Install the internal Serial ATA hard disk drives to the SATA connectors labeled
SATA_1/2/3/4/5/.
Boot up your computer, and press <Del> during POST to enter the BIOS setup.
In the Main Menu, go to Storage Configuration, and set the OnChip SATA Type item
to [RAID].
Press <F10> to save the changes and exit.
The RAID BIOS setup screens shown in this section are for reference only, and may not
exactly match the items on your screen.
Chapter 4
4-14
Chapter 4: Software support
AMD® FastBuild™ Utility
To enter the AMD® FastBuild™ utility:
1.
2.
Boot up your computer.
Press <Ctrl> + <F> during POST to display the main menu of the utility.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[ Main Menu ]
View Drive Assignments........[1]
Define LD.....................[2]
Delete LD.....................[3]
Controller Configuration......[4]
[ Keys Available ]
Press 1..4 to Select Option
[ESC] Exit
The Main Menu above allows you to select an operation to perform. The Main Menu options
include:
•
View Drive Assignments: shows the status of the hard disk drives.
•
Delete LD: deletes a selected RAID set and partition.
•
•
Define LD: creates a RAID 0, RAID 1, RAID 5 or RAID 10 configuration.
Controller Configuration: Shows the system resources configuration.
Chapter 4
Press <1>, <2>, <3>, or <4> to enter the option you need; press <ESC> to exit the utility.
ASUS M4A79 Deluxe
4-15
Creating a RAID 0 configuration
To create a RAID 0 set:
1. 2.
In the Main Menu, press <2> to enter the “Define LD” function.
Press <Enter>, and the following screen appears.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[ Define LD Menu ]
LD No RAID Mode Total Drv LD 1 RAID 0
2 Strip Block: 64 KB Gigabyte Boundary: ON Channel:ID
Assignment
1:Mas
2:Mas
3:Mas
4:Mas
Fast Init: OFF
Cache Mode: WriteThru
[ Define LD Menu ]
Drive Model
Capacity (MB) xxxxxxxxx
xxxxxxxxx
xxxxxxxxx
xxxxxxxxx
xxxxxx
xxxxxx
xxxxxx
xxxxxx
Y
Y
N
N
[ Keys Available ]
[↑]Up [↓]Down [ESC]Exit [Space] Change Option [Ctrl-Y]Save
3.
4.
5.
Highlight the LD1 item and press <Space> to select RAID 0.
Move to the Assignment item by using the down arrow key and set Y to any two of the
drives.
Press <Ctrl> + <Y> to save the setting. The utility prompts the following messages:
Press Ctrl-Y if you are sure to erase MBR! Press any other
key to ignore this option...
Press <Ctrl> + <Y> to erase MBR or press any key to continue.
Press Ctrl-Y to Modify Array Capacity or press any other key
to use maxinum capacity...
6.
Press <Ctrl> + <Y> to key in the desired capacity or press any key to continue.
The utility displays the following screen.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[ Define LD Menu ]
Chapter 4
LD
LD
LD
LD
LD
LD
LD
LD
LD
No RAID Mode Total Drv Capacity(MB)
Status
1 RAID 0
2 xxxxxx
Functional
2 ----
---- ----
---3 ----
---- ----
---4 ----
---- ----
---5 ----
---- ----
---6 ----
---- ----
---7 ----
---- ----
---8 ----
---- ----
----
[ Keys Available ]
[↑]Up [↓]Down [ESC]Exit [Enter] Select
4-16
Chapter 4: Software support
Creating a RAID 1 configuration
To create a RAID 1 set:
1. 2.
In the Main Menu, press <2> to enter the “Define LD” function.
Press <Enter>, and the following screen appears.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[ Define LD Menu ]
LD No RAID Mode Total Drv LD 1 RAID 1
2 Strip Block: 64 KB Gigabyte Boundary: ON Channel:ID
Assignment
1:Mas
2:Mas
3:Mas
4:Mas
Fast Init: OFF
Cache Mode: WriteThru
[ Define LD Menu ]
Drive Model
Capacity (MB) xxxxxxxxx
xxxxxxxxx
xxxxxxxxx
xxxxxxxxx
xxxxxx
xxxxxx
xxxxxx
xxxxxx
Y
Y
N
N
[ Keys Available ]
[↑]Up [↓]Down [ESC]Exit [Space] Change Option [Ctrl-Y]Save
3.
4.
5.
Highlight the LD1 item and press <Space> to select RAID 1.
Move to the Assignment item by using the down arrow key and set Y to any two of the
drives.
Press <Ctrl> + <Y> to save the setting. The utility prompts the following messages:
Press Ctrl-Y if you are sure to erase MBR! Press any other
key to ignore this option...
Press <Ctrl> + <Y> to erase MBR or press any key to continue.
Press Ctrl-Y to Modify Array Capacity or press any other key
to use maxinum capacity...
6.
Press <Ctrl> + <Y> to key in the desired capacity or press any key to continue.
The utility displays the following screen.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[ Define LD Menu ]
No RAID Mode Total Drv Capacity(MB)
Status
1 RAID 1
2 xxxxxx
Functional
2 ----
---- ----
---3 ----
---- ----
---4 ----
---- ----
---5 ----
---- ----
---6 ----
---- ----
---7 ----
---- ----
---8 ----
---- ----
----
Chapter 4
LD
LD
LD
LD
LD
LD
LD
LD
LD
[ Keys Available ]
[↑]Up [↓]Down [ESC]Exit [Enter] Select
ASUS M4A79 Deluxe
4-17
Creating a RAID 10 configuration
To create a RAID 10 set:
1. 2.
In the Main Menu, press <2> to enter the “Define LD” function.
Press <Enter>, and the following screen appears.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[ Define LD Menu ]
LD No RAID Mode Total Drv LD 1 RAID 10
4 Strip Block: 64 KB Gigabyte Boundary: ON Channel:ID
Assignment
1:Mas
2:Mas
3:Mas
4:Mas
Fast Init: OFF
Cache Mode: WriteThru
[ Define LD Menu ]
Drive Model
Capacity (MB) xxxxxxxxx
xxxxxxxxx
xxxxxxxxx
xxxxxxxxx
xxxxxx
xxxxxx
xxxxxx
xxxxxx
Y
Y
Y
Y
[ Keys Available ]
[↑]Up [↓]Down [ESC]Exit [Space] Change Option [Ctrl-Y]Save
3.
4.
5.
Highlight the LD1 item and press <Space> to select RAID 10.
Move to the Assignment item by using the down arrow key and set Y to any four of
the drives.
Press <Ctrl> + <Y> to save the setting. The utility prompts the following messages:
Press Ctrl-Y if you are sure to erase MBR! Press any other
key to ignore this option...
Press <Ctrl> + <Y> to erase MBR or press any key to continue.
Press Ctrl-Y to Modify Array Capacity or press any other key
to use maxinum capacity...
6.
Press <Ctrl> + <Y> to key in the desired capacity or press any key to continue.
The utility displays the following screen.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[ Define LD Menu ]
Chapter 4
LD
LD
LD
LD
LD
LD
LD
LD
LD
No RAID Mode Total Drv Capacity(MB)
Status
1 RAID 10 4 xxxxxx
Functional
2 ----
---- ----
---3 ----
---- ----
---4 ----
---- ----
---5 ----
---- ----
---6 ----
---- ----
---7 ----
---- ----
---8 ----
---- ----
----
[ Keys Available ]
[↑]Up [↓]Down [ESC]Exit [Enter] Select
4-18
Chapter 4: Software support
Deleting a RAID configuration
To create a RAID set:
1. 2.
In the Main Menu, press <3> to enter the “Delete LD” function.
Select the RAID item you want to delete and press <Del> or <Alt> + <D>.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[ Delete LD Menu ]
LD No
RAID Mode
Total Drv Capacity(MB)
LD 1
RAID 10 4 xxxxxx
LD 2
----
---- ----
LD 3
----
---- ----
LD 4
----
---- ----
LD 5
----
---- ----
LD 6
----
---- ----
LD 7
----
---- ----
LD 8
----
---- ----
Status
Functional
--- --- --- --- --- --- ----
[ Keys Available ]
Chapter 4
[↑]Up [↓]Down [ESC]Exit [Del or Alt+D] Delete
ASUS M4A79 Deluxe
4-19
4.5
Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing Windows® XP operating system
on a hard disk drive that is included in a RAID set.
For Windows® Vista™ operating system, use either the motherboard support DVD or a USB
device with the RAID driver.
4.5.1
Creating a RAID driver disk without entering the OS
To create a RAID/SATA driver disk without entering the OS:
1.
Boot your computer.
3. Set the optical drive as the primary boot device.
2.
4. 5.
6. 7. 8. 9. Press <Del> during POST to enter the BIOS setup utility.
Insert the support DVD into the optical drive.
Save changes and exit BIOS.
Press any key when the system prompts “Press any key to boot from the optical drive.”
When the menu appears, press <1> to create a RAID driver disk.
Insert a formatted floppy disk into the floppy drive then press <Enter>.
Follow the succeeding screen instructions to complete the process.
4.5.2
Creating a RAID/SATA driver disk in Windows®
To create a RAID driver disk in Windows®:
1.
Start Windows®.
2. Place the motherboard support DVD into the optical drive.
4. Insert a floppy disk/USB device into the floppy disk drive/USB port.
3. 5. Go to the Make Disk menu, then click ATI RAID/AHCI 32/64bit WinXP/Vista Driver to
create a RAID driver disk.
Follow the succeeding screen instructions to complete the process.
Write-protect the floppy disk to avoid a computer virus infection.
To install the RAID driver in Windows® XP:
1. 2. Chapter 4
3.
4. During the OS installation, the system prompts you to press the F6 key to install thirdparty SCSI or RAID driver.
Press <F6> then insert the floppy disk with RAID driver into the floppy disk drive.
When prompted to select the SCSI adapter to install, ensure that you select SB 750.
Follow the succeeding screen instructions to complete the installation.
To install the RAID driver in Windows® Vista™:
1. 2. 3. 4-20
Insert the floppy disk/USB device with RAID driver into the floppy disk drive/USB port.
During the OS installation, select SB 750.
Follow the succeeding screen instructions to complete the installation.
Chapter 4: Software support
Chapter 5
Chapter 5:
5.1
ATI® CrossFireX™ technology support
ATI CrossFireX™ technology
®
The motherboard supports the ATI® CrossFireX™ technology that allows you to install
multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in
this section.
•
•
•
•
•
Requirements
Chapter 5
5.1.1
In Dual CrossFireX mode, prepare two identical CrossFireX-ready graphics cards or
one CrossFireX-ready dual-GPU graphics card that are ATI® certified.
In Triple CrossFireX mode, prepare three identical CrossFireX-ready graphics cards
that are ATI® certified.
In Quad CrossFireX mode, prepare four identical CrossFireX-ready graphics cards or
two CrossFireX-ready dual-GPU graphics cards that are ATI® certified.
Ensure that your graphics card driver supports the ATI CrossFireX technology.
Download the latest driver from the AMD website at www.amd.com.
Ensure that your power supply unit (PSU) can provide at least the minimum power
required by your system. See page 2-35 for details.
5.1.2
•
The ATI Triple CrossFireX and Quad CrossFireX technology are currently supported
by Windows® Vista operating system only.
•
Visit the ATI Game website at http://game.amd.com for the latest certified graphics
card and the supported 3D application list.
Before you begin
For ATI CrossFireX to work properly, you have to uninstall all existing graphics card drivers
before installing ATI CrossFireX graphics cards to your system.
To uninstall all existing graphics card drivers:
1.
2.
Close all current applications.
For Windows XP, go to Control Panel > Add/Remove Programs.
For Windows Vista, go to Control Panel > Programs and Features.
3.
Select your current graphics card drivers.
5.
Turn off your computer.
4.
For Windows XP, select Add/Remove.
For Windows Vista, select Uninstall.
ASUS M4A79 Deluxe
5-1
5.2
Chapter 5
5.2.1
1.
2.
3.
4.
Installing CrossFireX™ graphics cards
•
Ensure that your power supply unit (PSU) can provide at least the minimum power
required by your system.
•
We recommend that you install additional chassis fans for better thermal environment.
•
Install only the identical CrossFireX-ready graphics cards that are ATI®-certified.
Different types of graphics cards will not work together properly.
•
The motherboard layout of this chapter is for reference purpose only and may not
exactly match your motherboard.
Dual CrossFireX installation
Prepare two CrossFireX-ready graphics
cards.
Insert the two graphics card into the
PCIEX16 slots. If your motherboard has
more than two PCIEX16 slots, refer to
its user manual for the locations of the
PCIEX16 slots recommended for
multi-graphics card installation.
Ensure that the cards are properly
seated on the slots.
Align and firmly insert the CrossFireX
bridge connector to the goldfingers on
each graphics card. Ensure that the
connector is firmly in place.
CrossFireX bridge
5-2
CrossFireX
goldfingers
Chapter 5: ATI® CrossFireX™ technology support
6.
Connect two independent auxiliary power
sources from the power supply to the two
graphics cards separately.
Connect a VGA or a DVI cable to the
graphics card.
5.2.2
1.
2.
3.
Triple CrossFireX installation
Prepare three CrossFireX-ready graphics cards.
Insert the three graphics card into the PCIEX16 slots. If your motherboard has more
than three PCIEX16 slots, refer to its user manual for the locations of the PCIEX16
slots recommended for multi-graphics card installation.
Ensure that the cards are properly seated on the slots.
4.
Align and firmly insert the two CrossFireX
bridge connectors to the goldfingers
on each graphics card. Ensure that the
connectors are firmly in place.
5. Connect three independent auxiliary
power sources from the power supply to
the three graphics cards separately.
6.
Chapter 5
5. Connect a VGA or a DVI cable to the
graphics card.
ASUS M4A79 Deluxe
5-3
5.2.3
1.
Prepare four CrossFireX-ready graphics cards.
3.
Ensure that the cards are properly seated on the slots.
2.
Insert the four graphics card into the PCIEX16 slots.
Chapter 5
4.
Align and firmly insert the three
CrossFireX bridge connectors to the
goldfingers on each graphics card.
Ensure that the connectors are firmly in
place.
5. Connect four independent auxiliary
power sources from the power supply to
the four graphics cards separately.
6.
5-4
Quad CrossFireX installation
Connect a VGA or a DVI cable to the
graphics card.
Chapter 5: ATI® CrossFireX™ technology support
5.3
Software information
5.3.1
Installing the device drivers
5.3.2
•
Ensure that your PCI Express graphics card driver supports the ATI® CrossFireX™
technology. Download the latest driver from the AMD website at www.amd.com.
•
If you are using a Triple or Quad CrossFireX system, ensure to install the ATI Catalyst®
driver under Windows® Vista™ OS. The ATI Triple or Quad CrossFireX technology is
currently supported by Windows® Vista™ only.
Chapter 5
Refer to the documentation that came with your graphics card package to install the device
drivers.
Enabling the ATI® CrossFireX™ technology
After installing your graphics cards and the device drivers, enable the CrossFireX™ feature
through the ATI Catalyst™ Control Center in Windows environment.
Launching the ATI Catalyst Control Center
To launch the ATI Catalyst Control Center
1.
Right-click on the Windows® desktop and select
Catalyst(TM) Control Center. You can also rightclick the ATI icon in the Windows notification area
and select Cayalyst Control Center.
2.
The Catalyst Control Center Setup
Assistant appears when the system
detects the existance of multi-graphics
cards. Click Go to continue to the
Catalyst Control Center Advanced
View window.
ASUS M4A79 Deluxe
5-5
Enabling Dual CrossFireX technology
1.
Chapter 5
2.
3.
4.
In the Catalyst Control Center window,
click Graphics Settings > CrossFireX >
Configure.
From the Graphics Adapter list, select
the graphics card to act as the display
GPU.
Select Enable CrossFireX.
Click Apply, and then click OK to exit
the window.
2
3
1
4
Enabling Triple or Quad CrossFireX technology
1.
2.
3.
4.
5.
5-6
In the Catalyst Control Center window,
click Graphics Settings > CrossFireX >
Configure.
From the Graphics Adapter list, select
the graphics card to act as the display
GPU.
Select Enable CrossFireX.
From the list, select the appropriate GPU
combination to apply the CrossFireX
technology.
Click Apply, and then click OK to exit
the window.
2
3
1
4
5
Chapter 5: ATI® CrossFireX™ technology support
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising