Catalogue Sheet: CNESTU Series
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
• Metal construction using Canadian
cold-rolled steel with baked enamel
finish – will not yellow
• Metal legend panel with red letter panel
• Universal mounting – end, wall
or ceiling
• Easy access to wiring entry for all
mounting options
• Canopy mounting system designed
specifically for ease of installation
• Standard field-selectable directional
knockout chevrons
• Long life, energy efficient ALINGAP
technology light source
• Energy efficient – consumes less than
3W
• Normal AC and emergency DC
operation – 120V to 347VAC
and 6V to 24VDC input
• CSA certified, meets or exceeds
CSA 22.2 No. 141. requirements
• Long-life, energy-efficient ALINGAP
technology LED light source completely
enclosed in acrylic module
• Also available with power pack; see
R-SN catalogue sheet
WIRE GUARDS
460.0057-RL
wall mount
460.0048-RL
end mount
460.0058-RL
ceiling mount
DIMENSIONS
Dimensions are approximate and subject to change.
4-5/8” [11.7 cm]
18” [45.7 cm]
8-3/4” [22.3 cm]
FEATURES
7-1/2” [19.1 cm]
All Metal “Sortie” Sign
7-1/2” [19.1 cm]
CNESTU SERIES
Supply and install the Ready-Lite® CNESTU Series LED “SORTIE’’ Exit Signs. The equipment shall operate with
universal two-wire AC input voltage of 120VAC to 347VAC at less than 1.5W and universal two-wire DC input
voltage from 6VDC to 24VDC at less than 1.5W for single or double face signs.
The sign shall be suitable for wall, end or ceiling mount. The faceplates shall be constructed of steel and
shall come standard with knockout chevrons. The frame shall be of a one-piece steel construction.The light
source shall be light emitting diodes (LED). The LED lamps shall provide illumination in normal and emergency
operation and shall be mounted inside the exit housing. Red LED technology shall be ALINGAP. An LED-sensitive
diffuser shall be mounted behind the legend to provide the 6” high by 3/4” stroke letters with even illumination.
The Exit Sign in a Self-powered configuration shall stay illuminated during emergency operation for at least
60 minutes upon AC failure.
The Exit Sign shall be CSA-C860 approved and meets CSA 22.2 No. 141.
The equipment shall be Ready-Lite® Model:
.
2-1/8” [5.3 cm]
19-1/8” [48.5 cm]
POWER CONSUMPTION AND UNIT RATING
MODEL
AC SPECS
DC SPECS
AC/DC standard
120 to 347VAC
less than 1.5W
6 to 24VDC
AC/special DC
120/277/347VAC
less than 2.5W
36 or 48 or 120VDC
less than 1.5W
less than 2.5W
Self-powered
120 to 347VAC
less than 3W
nickel-cadmium battery
minimum 60 minutes
ORDERING INFORMATION
SERIES
CNEST= LED sortie
MOUNTING
U= universal mount and face
VOLTAGE
COLOUR
-LU= 120 to 347VAC, 6 to 24VDC
-ISP= self-powered, 120 to 347VAC
-L120-2W= 120VAC, 120VDC 2 wires
-LU36= 120/277/347VAC, 36VDC
-LU48= 120/277/347VAC, 48VDC
-LU120= 120/347VAC, 120VDC
EXAMPLE: CNESTU-LU
44
OPTIONS
Blank= factory white
BK= black
GY= textured grey
TP= tamper-proof screws*
VRTP1= vandal resistant shield with tamper-proof
screws, single face*
VRTP2= vandal resistant shield with tamper-proof
screws, double face*
Other colours available
*990.0119-RL= T
amper-proof bit (sold separately)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement