Atlantis Land A02-PSU-W54 Product information

Atlantis Land A02-PSU-W54 Product information
NetServer Pro
Wireless USB 2.0 Print Server
A02-PSU-W54
MANUAL
A02-PSU-W54_ME01
Where solutions begin
Company certified ISO 9001:2000
ITALIANO
Questo prodotto è coperto da garanzia Atlantis Land
Fast-Swap
della durata di 3 anni. Per maggiori dettagli in merito o per accedere alla
documentazione completa in Italiano fare riferimento al sito
www.atlantis-land.com.
ENGLISH
This product is covered by Atlantis Land 3 years Fast-Swap warranty.
For more detailed informations please refer to the web site
www.atlantis-land.com.
For more detailed instructions on configuring and using this device,
please refer to the online manual.
FRANCAIS
Ce produit est couvert par une garantie Atlantis Land
FastSwap 3 ans. Pour des informations plus détaillées, référez-vous svp au
site Web www.atlantis-land.com.
DEUTSCH
Dieses Produkt ist durch die Atlantis Land 3 Jahre Fast-Swap Garantie
gedeckt. Für weitere Informationen, beziehen Sie sich bitte auf Web Site
www.atlantis-land.com.
ESPAÑOL
Este producto està cubierto de garantía Atlantis Land
Fast-Swap
por 3 años. Para una información más detallada, se refiera por favor al
Web site www.atlantis-land.com.
The award of the information is facultative, but its lack will prevent
ATLANTIS LAND® from starting the Guarantee process requested.
R
R
g
o
u
p
o
d
u
Reeeg
giiisssttteeerrr yyyo
ou
urrr p
prrro
od
du
ucccttt!!!
w
w
w
w
n
n
d
o
m
ww
ww
w...aaatttlllaaan
ntttiiisss---lllaaan
nd
d...ccco
om
m
Registration
on
the
web
site
www.atlantis-land.com within 15 days
from the purchase of the product dismiss
the customer from showing a valid proof of
purchase (Sale Receipt or Invoice) in case
of the request of intervention. For further
information we invite you to look at our
web site at the section WARRANTY.
Copyright
The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All
other names mentioned mat be trademarks or registered trademarks of
their respective owners. Subject to change without notice. No liability for
technical errors and/or omissions.
INDEX
INDEX
1.1 About this Guide................................................................................ 10
1.2 Package contents.............................................................................. 11
1.3 System Requirements....................................................................... 11
1.4 General Features .............................................................................. 11
1.5 The Front Panel LEDs ...................................................................... 13
1.6 The Rear Ports.................................................................................. 14
1.7 Default Settings................................................................................. 14
1.8 Cabling .............................................................................................. 15
1.9 Using The Utilities ............................................................................. 16
1.9.1 Installing PS-Utility..................................................................... 17
1.9.2 Launching PS-Utility .................................................................. 17
1.9.3 Setting Up Windows XP TCP/IP Printing................................... 19
1.10 Web Configuration .......................................................................... 20
1.10.1 Management............................................................................ 21
1.10.2 Configuration ........................................................................... 26
1.10.3 Tools ........................................................................................ 35
1.10.4 Help ......................................................................................... 40
1.11 Printing in Windows 98SE/ME ........................................................ 41
1.11.1 Installing the LPR for TCP/IP Printing Client ........................... 41
1.11.2 Adding LPR Printer Ports ........................................................ 43
1.11.3 Printing from Windows 98SE/Me............................................ 45
1.11.4 Setting TCP/IP Printing Settings.............................................. 49
1.12 Printing in Windows 2000/XP.......................................................... 51
1.12.1 Setting Up Windows 2000 TCP/IP Printing ............................. 51
1.12.2 Setting Up Windows XP TCP/IP Printing ................................ 58
1.13 Printing in MAC OS......................................................................... 65
1.13.1 Rendezvous Uses in MAC OS 10.2 ........................................ 65
1.14 Technical Features ......................................................................... 68
1.15 Support............................................................................................ 70
A02-PSU-W54_ME01(V1.0 January 2007)
5
NetServer Pro
Copyright Statement
No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, whether electronic,
mechanical, photocopying, recording or otherwise without the prior writing
of the publisher. Windows™ 98SE/2000/ME/XP are trademarks of
Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved.
The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All
other names mentioned mat be trademarks or registered trademarks of
their respective owners. Subject to change without notice. No liability for
technical errors and/or omissions.
Wireless LAN, Health and Authorization for use
Radio frequency electromagnetic energy is emitted from Wireless LAN
devices. The energy levels of these emissions however are far much less
than the electromagnetic energy emissions from wireless devices like for
example mobile phones. Wireless LAN devices are safe for use frequency
safety standards and recommendations. The use of Wireless LAN
devices may be restricted in some situations or environments for
example:
·On board of airplanes, or
·In an explosive environment, or
·In case the interference risk to other devices or services is perceived or
identified as harmful
In case the policy regarding the use of Wireless LAN devices in specific
organizations or environments (e.g. airports, hospitals, chemical/oil/gas
industrial plants, private buildings etc.) is not clear, please ask for
authorization to use these devices prior to operating the equipment.
Regulatory Information/disclaimers
Installation and use of this Wireless LAN device must be in strict
accordance with the instructions included in the user documentation
provided with the product. Any changes or modifications made to this
device that are not expressly approved by the manufacturer may void the
user’s authority to operate the equipment. The Manufacturer is not
responsible for any radio or television interference caused by
unauthorized modification of this device, of the substitution or attachment.
7
NetServer Pro
Manufacturer and its authorized resellers or distributors will assume no
liability for any damage or violation of government regulations arising from
failing to comply with these guidelines.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures.
CE in which Countries where the product may be used freely:
Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece,
Ireland, Denmark, Luxembourg, Austria, Finland, Sweden, Norway and
Iceland.
France: except the channel 10 through 13, law prohibits the use of other
channels.
CE/EMC Restriction of Liability
The product described in this handbook was designed, produced and
approved according to the EMC-regulations and is certified to be within
EMC limitations.
If the product is used in an uncertified PC, the manufacturer undertakes
no warranty in respect to the EMC limits. The described product in this
handbook was constructed, produced and certified so that the measured
values are within EMC limitations. In practice and under special
circumstances, it may be possible, that the product may be outside of the
given limits if it is used in a PC that is not produced under EMC
certification. It is also possible in certain cases and under special
circumstances, which the given EMC peak values will become out of
tolerance. In these cases, the user himself is responsible for compliance
with the EMC limits.
Declaration of Conformity
This equipment has been tested and found to comply with Directive
1999/5/CE of the European Parliament and of the Council on radio
equipment and telecommunications terminal equipment and the mutual
recognition of their conformity. After assessment, the equipment has been
found to comply with the following standards: EN 300.328 (radio), EN 301
489-1, EN 301 489-17 (electromagnetic compatibility) and EN 60950
8
NetServer Pro
(safety). This equipment may be used in all European Union contries and
in all countries applying Directive 1999/5/CE, without restriction, with the
exception of the following countries:
France:
When this equipment is used outdoors, output power is limited to within
the frequency bans listed on the chart. For more info, consult the website
www.art-telecom.fr.
Location
Indoor (no restriction)
Outdoor
Frequency Band
(MHz)
2400-2483,5
2400-2454
2454-2483,5
Power (EIRP)
100mW(20dBm)
100mW(20dBm)
10mW(10dBm)
Italy:
For more info, consult the website www.comunicazioni.it
9
NetServer Pro
Congratulations on purchasing Atlantis Land NetServer Pro, the easiest
and fastest way to deploy printers on your network.
This compact print server can connect your network through an Access
Point under the infrastructure mode, or can be used in ad-hoc mode for
direct communication between PC/Notebook and print server anywhere
you wish to locate wireless printer services.
It manages the flow of print files from your workstation or file server to its
connected printers, delivering print jobs to high-performance printers
much faster than a file server or a PC acting as a print server can.
NetServer Pro features a Web-based Configuration Utility, which allows
you to set up the print server through the web browser easily and quickly.
It also includes a simple software utility PS-Utility, a user-friendly
program that allows you to complete settings for the print server.
1.1 About this Guide
This manual provides instructions and illustrations on how to use your
NetServer Pro, including:
ƒ
Hardware Installation, describes the hardware installation
procedure for the product.
ƒ
Using the Utilities, helps you to install and use the software.
ƒ
Web Configuration, completes the configuration using the web
browser.
ƒ
Printing in Windows XP, lets you complete printing task through
your print server in Windows XP environment.
ƒ
Printing in MAC OS, lets you complete printing task through your
print server in MAC OS environment.
10
NetServer Pro
Illustrations or setting values in this manual are FOR
YOUR REFERENCE ONLY. The actual settings and
values depend on your system and network. If you
are not sure about the respective information, please
ask your net work administrator or MIS staff for help.
1.2 Package contents
Unpack the package and check all the items carefully, and be certain that
you have:
Atlantis Land NetServer Pro, CDRom with manual and PS-Utility,
Quick Start Guide, Power Adapter AC-DC (5V, 2.5A)
If any item contained is damaged or missing, please contact your local
dealer immediately. Also, keep the box and packing materials in case
you need to ship the unit in the future.
1.3 System Requirements
Operating System:
ƒ
ƒ
Microsoft Windows® 98SE/ME/NT/2000/XP/2003
Apple Mac OS X or above (with Apple Talk support)
For Web Configuration:
ƒ
Java-enabled web browser, such as Microsoft® Internet Explorer
5.0 and Netscape Navigator 6.0.
1.4 General Features
ƒ
ƒ
ƒ
ƒ
Compact pocket size
Compliant with USB 2.0 high-speed printing
Fast 54Mbps WLAN connectivity based on IEEE 802.11g
wireless high-speed standard
Multi protocol support is ideal for shared printing in mixed-LAN
environments
11
NetServer Pro
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Windows-based administrative program makes it possible to set
up in a few steps
Latest MIB-II (RFC 1213) for SNMP standard management
Offer LPR program for TCP/IP printing in Windows 95/98/ME
IP assignment support for DHCP, BOOTP and RARP
Support Web configuration
Provide Flash memory for easy firmware upgrade
Auto fallback data rate under noisy environment or longer range
distance
Printing Access control and display
E-mail notification for printer error messages; Support E-Mail
printing and FTP printing
Ability to save print server configuration into hard drive for easy
access and backup without the hassle to reconfigure if setting is
altered
Support IPP printing for Windows 2000/XP
Support second http port for remote web configuration and IPP
printing
Support UPnP (Universal Plug and Play) for Windows XP/2003
Support Mac OS 10.2 “Rendezvous” – Zero-configuration feature
12
NetServer Pro
1.5 The Front Panel LEDs
LED
1
Meaning
Power
2
USB
3
LAN
A steady light confirms that the NetServer
Pro is powered on.
Steady light confirms that the print server
has a good connection to a printer.
When it blinks, the printer connected is
printing.
Steady light confirms that the print server
has a good connection to your network.
When it blinks (briefly dark), the print
server is receiving/ transmitting data
from/to the network.
13
NetServer Pro
4
WLAN
Steady light confirms that the print server
has a good connection to your wireless
network.
When it blinks (briefly dark), the print
server is receiving/ transmitting data
from/to the wireless network.
1.6 The Rear Ports
Port
Meaning
1
LAN
2
USB
3
POWER (jack)
4
RESET
The NetServer’s Pro rear panel features
an RJ-45 connector for connections to
10Base-T Ethernet cabling or 100BaseTX Fast Ethernet cabling.
There is a fast USB connector located on
the rear panel of the NetServer Pro,
providing connection for one Printer.
Connect the supplied power adapter to
this jack.
Press this button for 10 seconds to
restore factory default setting.
1.7 Default Settings
Before you configure the NetServer Pro, you need to know the following
default settings:
ƒ
ƒ
ƒ
Username:
Password :
IP address : 192.168.0.1
14
NetServer Pro
1.8 Cabling
Follow these steps for a trouble-free start of the print server operations
with NetServer Pro.
1. Confirm proper operation of the printer to be connected to the print
server.
2. When you have confirmed proper operation of the printer, turn off its
power.
3. Confirm that your network is operating normally.
4. Connect the print server to the network (through the RJ-45 connector
of the print server or its IEEE802.11g wireless interface).
Configuration problems may result if the print server is
powered up without first establishing its network
connection. Please follow this procedure to avoid
complications at the configuration stage.
5. While the printer is powered off, plug NetServer Pro to the printer
(USB interface).
6. Turn on the printer’s power.
7. Connect the DC end of the AC Power adapter to the DC power input
socket of NetServer Pro and the AC end to the wall outlet. This will
supply power to the print server immediately.
NetServer Pro is built with a default IP Address. To
prevent from any conflict in your network, it is
recommended to use the PS-Utility program to
change the IP setting when there is some other
device’s IP Address is the same as the print server’s
default IP Address.
15
NetServer Pro
The following diagram explains the application of NetServer Pro.
1.9 Using The Utilities
This section describes the software utilities for the NetServer Pro:
ƒ
ƒ
PS-Utility
PS Wizard
16
NetServer Pro
1.9.1 Installing PS-Utility
Follow the procedure outlined below to install PS-Utility:
1. Insert the NetServer Pro’s Installation CD into the CD-Rom drive.
2. Click Install Utility from the Auto-Run menu screen.
3. Once executed, the Setup program will extract files to launch the
InstallShield Wizard; then, follow it step by step to complete the
installation process
After installing the utility, the application program for NetServer Pro is
automatically installed to your computer, and creates a folder in
Start\Programs\PS-Utility. Now, you can begin using PS-Utility.
To avoid the conflict in your network, you can use PSUtility to change the related settings of your print
server (such as the IP address) after finishing the
installation.
1.9.2 Launching PS-Utility
To launch PS Utility:
1. Click Start -> Programs -> PS-Utility, and then click the PS-Utility
v3.11 item.
2. The main screen will appear as below, and it starts to search the
connected print server within the network.
17
NetServer Pro
1. Device List: Display the connected print server within the network.
2. Control Buttons: Setup Wizard, Change IP Address, Update
Firmware, Show Web Setup, Factory Reset, Print Test, Discover
Device, About, and Close.
3. Information Field: Display the basic information of the selected print
server in the Device List.
4. Status Bar: Display the system status.
Before you can print over the network using your print server, you may
need to perform some basic setup tasks through PS-Utility. These
settings include:
ƒ
ƒ
Change the print server’s IP Address: clicking the Change IP
Address button will bring up a dialog box that allows you to
change the IP Address of selected print server.
Perform web configuration: click the Show Web Setup button
to open your web browser and launch the Configuration Utility;
alternately, you can double-click the selected print server in the
Device List to launch the Configuration Utility.
18
NetServer Pro
ƒ
ƒ
ƒ
Search the available devices: click the Discover Device button
to re-search the connected print server within the network.
Resume the default settings: click the Factory Reset button to
reload the factory settings of NetServer Pro.
Update Firmware: click the Update Firmware button to update
the firmware of NetServer Pro.
1.9.3 Setting Up Windows XP TCP/IP Printing
Following is the correct procedure for setting up TCP/IP LPR printing
under Windows XP:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Click Start -> Printer and Faxes.
Double Click Add a Printer then click Next.
In the next windows, select Local Printer.
Create a new Standard TCP/IP Port then click Next.
Input the IP Address of NetServer Pro, and the Port name of the Port
that will be printed to, then click Next.
In the next page Select Custom, and click Settings.
Select LPR, and put the Port name in the field labeled Queue Name.
Then Click OK.
Click Next.
Click Finish
The Printer Install Wizard will now prompt for drivers. Select the
correct Make and Model, or click Have Disk, to provide the
Manufacturer’s Driver Disk.
19
NetServer Pro
1.10 Web Configuration
You can access and manage the NetServer Pro through: 1) the enclosed
software PS-Utility, and 2) a web browser. This chapter describes the
second method – the Web Configuration Utility, and explains how to set
up your print server with the web browser.
First, launch your web browser (such as the Internet Explorer 6.0 used in
this manual). Then, type http://192.168.0.1 (the default IP address) in the
Address bar and press [Enter] to enter the Management screen of the
Configuration Utility.
The computer’s IP address must correspond with
the print server’s IP address in the same
segment for the two devices to communicate.
Extensive knowledge of LAN will be helpful in
configuring the print server.
20
NetServer Pro
1.10.1 Management
System
As shown above, the System displays the status of your print server and
network.
Device Status: The information about the print server, including the
firmware version, MAC/IP address, and up time, can be found in this field.
Printer Status: The items in this field display the information of the
printer, such as the given name for the printer, speed, printer status, and
status of your printing tasks, etc.
21
NetServer Pro
Ethernet Status: You can monitor the networking status in this field,
including the network connection, speed, and the packets status.
Clicking Refresh will update the information.
Wireless
Click the Wireless item in the left column to display the information of the
wireless LAN.
Wireless Status: The items in this field display the information of the
wireless LAN, such as the connection mode (Infrastructure or Ad-Hoc),
SSID, channel, data transfer rate, WEP encryption, and the packets
status.
Clicking Refresh will update the information.
22
NetServer Pro
Network
Click the Network item to display the information of the LAN.
Auto IP: This field contains the current settings of TCP/IP, including
DHCP/BOOTP, UPnP, and MAC Rendezvous. The items in this field are
configured in Configuration -> Network -> TCP/IP.
TCP/IP Printing: In this field, you can monitor the status of your printing
tasks through TCP/IP.
23
NetServer Pro
Microsoft Network Printing: In this field, you can monitor the status of
your printing tasks through Microsoft Network.
MAC AppleTalk Printing: In this field, you can monitor the status of your
printing tasks through MAC AppleTalk.
Clicking Refresh will update the information.
24
NetServer Pro
User
Click the User item in the left column to display the user(s) information.
Users Printing Log: The items in this field display the user(s)
information, which include the user(s) MAC address, IP address, name,
and status of printing tasks.
25
NetServer Pro
1.10.2 Configuration
System
Click the System item to set the NetServer Pro’s system information.
System Device: In this field, you can configure the basic information of
your print server.
ƒ Server Name: Assign a name to the print server.
ƒ Location (optional): Assign a location for the print server
ƒ Admin Contact (optional): Assign the Admin Username for the
print server.
ƒ Password: Enter the Administrator password (3-8 characters).
To set up the password, please enter the password in the New
Password box, and then enter the same one again in the
Confirm Again box.
Port Setting: In this field, you can assign the Port Name for the print
server, and the description for the USB port. It also allows you to select
the PJL Printer setting (Yes or No).
Clicking Save will save settings.
26
NetServer Pro
PJL (Print Job Language) has certain job
requirements that must be met to work correctly.
For more information, please refer to your
printer’s manual.
Wireless
Click the Wireless item to set the NetServer Pro’s wireless interface and
his security methods.
Wireless Interface: In this field, you can configure the basic information
of NetMaster Pro’s wireless interface.
27
NetServer Pro
Connection Mode: You can select two connection mode:
¾ Infrastructure: Connects to compatibly configured
wireless AP or router in a WLAN.
¾ Ad-Hoc: Connect to compatibly configured wireless
clients in the peer-to-peer mode.
ƒ SSID: Assign the SSID in this box. You can manually input the
name or select one from the pull-down menu. To search the
available wireless AP within the network, click the Site Survey
button.
ƒ Wireless Channel: Select the channel from the pull-down menu.
The default setting is 11. (Enable only in Ad-Hoc connection
mode).
ƒ Transmission Rate: Select the data transmit rate from the pulldown menu. The default setting is Fully Automatic.
Encryption: This field allows you to configure the settings of data
encryption for NetServer Pro’s wireless interface; it support WEP (64 or
128 bits) and WPA-PSK.
ƒ Disable: Disable wireless network security
ƒ WEP Encryption: This option allows you to select WEP
alghorithm for data encryption.
¾ Length: Select the length of WEP keys (64 bits or 128
bits).
¾ Format: You can decide the network key to be encoded
by ASCII (ASCII characters) or HEX (hexadecimal
digitals).
¾ Key 1-4: Insert WEP keys.
¾ Encrypt Data Transmissions Using: Select which key
will be use by NetServer Pro for data encryption.
¾ Authentication Type: Select authentication type for
wireless interface (Open System, Shared Key or Both)
ƒ WPA-PSK: This option allows you to select WPA-PSK alghorithm
for data encryption.
¾ Preshared Key: Insert WPA-PSK Preshared Key.
ƒ
28
NetServer Pro
Advanced Setting: This field allows you to configure more settings,
including:
ƒ Beacon Interval: Enter the number of beacon interval time in
millisecond.
ƒ Preamble: This option allows you to set the length of preamble.
¾ Long: it is set to 144 bits
¾ Short: it is set to 72 bits.
Clicking Save will save settings.
Network
Click the Network item to set the NetServer Pro’s LAN settings.
TCP/IP: This field contains some options that allow you to configure the
TCP/IP setting.
ƒ IP Address: You can select two IP Assignement mode:
29
NetServer Pro
Manually Assign: This option allows you to set the IP
address manually; you should enter the related
information in the following boxes, including IP Address,
Subnet Mask, and Default Gateway.
¾ Automatically Assign: This option allow NetServer Pro
to give an IP address automatically from a DHCP Server
existing on your network.
ƒ DNS Server Address: Insert DNS Server address (it will be
necessary if you select Manualy Assign).
ƒ UPnP: This option allows you to enable or disable UPnP mode
(Enable or Disable).
ƒ MAC Rendezvous: This option allows you to enable or disable
MAC Rendezvous mode (Enable or Disable).
ƒ Second HTTP Port: This option allows you to enable or disable
Second HTTP Port; you should use it for Remote Web
Management or for IPP Printing (Enable or Disable).
ƒ Port Number: Insert the number of port to use like secondary
HTTP Port.
Microsoft Network: Enter the name of the Workgroup that you want the
NetServer
Pro
associated
with
in
this
field.
¾
Apple Talk: This fields contain some options that allow you to configure
AppleTalk’s setting.
30
NetServer Pro
ƒ
ƒ
AppleTalk Zone: Enter the AppleTalk Zone name in the box.
USB: In the following options, enter the related configuration,
such as the printer type.
¾ Chooser Name: Display the NetServer Pro’s Port name.
¾ Printer Type: Enter the printer’s type in this box.
¾ PostScript Level: Select from the pull-down menu
(Level 1 or Level 2).
¾ Font Group: Select from the pull-down menu.
Clicking Save will save settings.
User
Click the User item to set printing access and permission for each user.
Printing Control:
ƒ Enable User Printing Control: Users in the User List is
permitted to access the print server or not (Yes or No).
ƒ Allow Undefined Users Printing: For the user(s) who is not in
the User List, you can also limit the access right by setting this
31
NetServer Pro
option (Yes or No).
Clicking Save will save settings.
Define User: You can add/delete the user(s) to/from the User List. The
User List at the bottom of the screen displays the current defined user
and related information for the print server
ƒ Add User: This fields contain some options that allow you to
configure User setting. Clicking Add to add users.
¾ Username: Insert Username to identify the user.
¾ MAC Address: Insert the MAC Address of Ethernet (or
wireless device) that you want to add to the list.
¾ Printing Access: Select if user can have printing access
(Yes or No).
ƒ Delete User: Select an User from the list and press this button to
delete this user from User list.
ƒ User List: Show User list with his permission.
32
NetServer Pro
E-Mail
Click the E-Mail item to set parameters to use E-Mail Notifications system
and for E-mail printing.
E-mail Account: You can assign an E-mail address to the print server, so
that your mail of the account can be printed out directly through the printer
(ASCII text only). To enable this function, enter the E-mail account in the
Print Server E-mail Address box.
ƒ Incoming E-mail (POP3) Server Address: Enter the server
address that is used to receive your E-mail in this box.
ƒ Outgoing E-mail (SMTP) Server Address: Enter the server
address that is used to send your E-mail in this box.
If your mail server needs to verify the user when sending E-mail, you
have to input the Account Name and Password.
33
NetServer Pro
E-Mail Notification: You can set the print server to send an alter
message when the printer status changes through E-mail. To enable this
function, set the Enable e-mail notification for printer status changing
option to Yes. Then, input the administrator’s E-mail address in the
Admin E-mail Address box.
E-Mail Printing:
ƒ E-mail Printing (ASCII Text Only): Select Enable to enable the
E-mail printing function.
ƒ Receive E-mail Interval: Enter the number in this box to set up
the time (in minute) to check/receive E-mail regularly.
Clicking Save will save settings.
SNMP
Click the SNMP item to set parameters for SNMP communications.
SNMP Management: SNMP (Simple Network Management Protocol) is a
set of protocols for managing complex networks.
34
NetServer Pro
ƒ
Community 1/2/3: Enter a name in the Name box, and configure
the Access Right by selecting Read Only or Read/Write from
the pull-down menu.
Clicking Save will save settings.
1.10.3 Tools
Print Test
Print Test: Click Test to print a test page.
35
NetServer Pro
E-Mail
Test E-Mail Account: Click Test to send a test E-mail to the given
administrator’s E-mail address.
To use Test E-Mail Account you have to enable
E-Mail Notifications functions in Configuration
-> E-mail -> E-Mail Notifications
Receive E-Mail: Click Yes to immediately check and receive E-mail, and
then print out the mail when available.
36
NetServer Pro
Reset
Reset: Click Yes to immediately restart the NetServer Pro.
Factory Reset
37
NetServer Pro
Factory Reset: Click Yes to reload the factory settings of the NetServer
Pro.
Fimrware Upgrade
Firmware Upgrade: When a new version of firmware is available (e.g.
downloading from Atlantis Land website www.atlantis-land.com), you can
upgrade the firmware of your NetServer Pro. Click Browse to point to the
firmware file, and then click Upgrade.
Do NOT upgrade firmware on any Atlantis Land
product over a wireless
connection. Failure of the device may result. Use only
hard-wired network connections.
After upgrading you must reset the NetServer Pro to
factory default settings, then manually re-enter your
settings.
Please pay attention. In case electrical shutdown,
during this procedure, this product could be not
usable.
38
NetServer Pro
When uploading software to the NetServer, it is
important not to interrupt the Web browser by closing
the window or loading a new page. If the browser is
interrupted, it may corrupt the software
Backup
Backup Device Configuration to File: Click Backup to backup your
current configuration of NetServer Pro to file and then save in the
computer.
Restore Device Configuration from File: You can reload a configuration
that you saved before. Click Browse to point to the backup file, and then
click Restore.
Restore Device Configuration will restore all
configuration of NetServer Pro, except IP Address.
39
NetServer Pro
1.10.4 Help
This screen displays the information of NetServer Pro.
40
NetServer Pro
1.11 Printing in Windows 98SE/ME
The NetServer Pro can provide print services to TCP/IP networks using
the lpr/lpd network printing protocol. Most UNIX systems are capable of
supporting lpd, as is Windows NT/2000.
This LPR for TCP/IP Printing client gives Windows 98SE/Me workstations
the ability to print using the lpr/lpd printing protocol. Though it is possible
to print to Print Servers from Windows 98SE/Me, this capability is useful if
primarily administer your network from UNIX systems, or if you want to
print from workstations that are only accessible through IP routing.
1.11.1 Installing the LPR for TCP/IP Printing Client
Before your Windows 98SE/Me workstation can print using the lpr
protocol, you will need to install the client program, as follows:
1. Make sure that you have installed the TCP/IP protocol, and have
properly configured the Windows 98SE/Me TCP/IP settings. You can
install the protocol from the Network control panel if necessary.
2. From the Start menu, choose the Settings submenu, then the
Control Panel item within it. Windows will display the Control Panel
folder.
3. Double-click on the Network icon in the Control Panel folder.
4. Click on the Add... button on the Configuration tab.
5. Windows will ask for the type of component to add. Select Client and
click Add... to continue.
41
NetServer Pro
6. When Windows asks you to select a network client, click the Have
Disk... button.
7. Insert the NetServer Pro CD in your computer’s CD-Rom, enter the
proper pathname (for example , D:\lpr), and click OK.
8. Select the LPR for TCP/IP
Printing client and click OK
9. Windows will copy the necessary
files, and return to the Network
dialog. Click OK to let Windows
restart.
42
NetServer Pro
1.11.2 Adding LPR Printer Ports
Once you have installed the client, and have enabled TCP/IP printing for
NetServer Pro, then you need to add a printer port for each printer you
will be printing to using the lpr/lpd protocol. To add a printer port:
1. From the Start menu, choose the Settings submenu, then the
Control Panel item within it. Windows will display the Control Panel
folder.
2. Double-click on the Network icon in the Control Panel folder.
3. Choose the LPR for TCP/IP Printing client and click the Properties
button.
43
NetServer Pro
4. Click the Add Port... button to add a new lpd-accessible printer port.
5. Enter the IP address of NetServer Pro and the name of the printer
port that you will be printing to, then press OK.
6. Click OK to leave the LPR for TCP/IP Printing Properties window.
44
NetServer Pro
1.11.3 Printing from Windows 98SE/Me
After you have added the necessary printer ports, you can add a printer
device for printing to the port. To enable printing to an lpr-accessible
printer port from Windows 98SE/Me:
From the Start menu, choose the Settings submenu, then the Printers
item within it. Windows will display the Printers folder.
1. Double-click on the Add Printer icon in the Printers folder.
2. Windows will start the Add Printer Wizard.
3. Click the Next button to continue to the next screen.
4. Choose the Network Printer selection and click the Next button to
continue.
45
NetServer Pro
5. Enter the name of the port, as displayed in the LPR for TCP/IP
Printing Port List.
46
NetServer Pro
6. Alternatively, you can click Browse... and locate the printer port.
TCP/IP printing ports are located under the Entire Network icon,
within the Print Servers - TCP/IP LPR icon.
7. Press OK when you have located the proper printer port.
8. Click Next to continue to the next step.
9. At this point Windows will ask you to choose the correct printer driver
for the printer. Choose you printer’s make and model from the list, or
use the driver disk included with the printer. When you have chosen
the correct printer, click Next to continue.
47
NetServer Pro
10. Windows will then ask for a name for the new printer, and ask
whether or not you want to set the printer as the Windows default
printer. Click Finish (or Next) to continue.
11. Windows may ask you whether or not you wish to print a test page to
make sure that the printer will work correctly. When the test page is
done printing, you will be asked whether or not the test page printed.
48
NetServer Pro
1.11.4 Setting TCP/IP Printing Settings
The lpr client’s Properties dialog allows you to change several of the
client’s settings. To change these settings:
1. From the Start menu, choose the Settings submenu, then the
Control Panel item within it. Windows will display the Control Panel
folder.
2. Double-click on the Network icon in the Control Panel folder.
3. Choose the LPR for TCP/IP Printing client and click the Properties
button.
49
NetServer Pro
4. Click on the Settings tab to access the lpr client settings. Change the
settings as necessary, and press OK to let the changes take effect.
5. The parameters are as follows:
ƒ Communication Timeout: Determines how long, in seconds, the
system will wait before determining that it has lost connection with
lpr/lpd print servers.
ƒ Retry Interval: Determines how long, in seconds, the system will
wait before retrying a lost connection.
ƒ Retry Times: Determines how many times the system will retry a
lost connection with an lpr/lpd print server. If Infinite is checked,
it will retry indefinitely.
ƒ Spool Path: Gives the directory path where the system will
temporarily store lpr/lpd print server job files.
50
NetServer Pro
1.12 Printing in Windows 2000/XP
1.12.1 Setting Up Windows 2000 TCP/IP Printing
Following is the correct procedure for setting up TCP/IP LPR printing
under Windows 2000.
1. Click Start > Settings
> Printers.
2. Double Click Add
Printer
3. Select Local Printer
4. Create
a
new
Standard TCP/IP
Port
51
NetServer Pro
5. Click Next
6. Input the IP Address of the NetServer Pro, and the Port name of the
Port that will be printed to, then click Next.
52
NetServer Pro
7. Select Custom, and click Settings.
8. Select LPR, and put
the Port name in the
field labeled Queue
Name.
9. Then Click OK.
53
NetServer Pro
10. Click Finish
11. The Printer Install Wizard will now prompt for drivers. Select the
correct Make and Model, or click Have Disk, to provide the
Manufacturer’s Driver Disk.
54
NetServer Pro
12. Click Next.
13. Select a Printer Name.
55
NetServer Pro
14. Sharing can be enabled here.
15. Also, a Test Page can be printed to confirm proper configuration.
56
NetServer Pro
16. When the Test Page has been printed, click Finish to complete the
installation.
57
NetServer Pro
1.12.2 Setting Up Windows XP TCP/IP Printing
Following is the correct procedure for setting up TCP/IP LPR printing
under Windows XP.
1. Click Start -> Printer and Faxes
2. Double Click Add a Printer
3. Click Next
58
NetServer Pro
4. Select Local Printer
5. Create a new Standard TCP/IP Port
59
NetServer Pro
6. Click Next
7. Input the IP Address of the Print Server, and the Port name of the
Port that will be printed to, then click Next.
60
NetServer Pro
8. Select Custom, and click Settings.
9. Select LPR, and put the
Port name in the field
labeled Queue Name.
Then Click OK.
10. Click Next.
61
NetServer Pro
11. Click Finish
12. The Printer Install Wizard will now prompt for drivers. Select the
correct Make and Model, or click Have Disk, to provide the
Manufacturer’s Driver Disk.
62
NetServer Pro
13. Click Next.
14. Select a Printer Name.
63
NetServer Pro
15. A Test Page can be printed to confirm proper configuration.
16. When the test page has been printed, click Finish to complete the
installation.
64
NetServer Pro
1.13 Printing in MAC OS
1.13.1 Rendezvous Uses in MAC OS 10.2
The latest version of MAC OS provides a new feature that is called
Rendezvous. Rendezvous is a revolutionary networking technology
standard that lets you create an instant network of computers and
devices, which can be used throughout Mac OS 10.2 to provide
innovative ways to share files and printers and even contact other people
on the network.
For the printer connection, the Mac OS 10.2 Print Center application uses
Rendezvous to discover Rendezvous-enabled printers on the network.
When you add your computer to a network, Print Center automatically
discovers the available printers. All you have to do is selecting the one
you want to use and then start printing. You can add a new printer to the
network and all the users on the network will see the new printer
automatically appear in their Print Center, without any configuration.
The following instructions provide a common procedure of installing the
printer:
1. Launch Print Center. Press and hold the Option key, click the Add
button.
65
NetServer Pro
2. Select Rendezvous from the pop-up menu.
3. When clicking the Rendezvous item, the following window appears to
display the connected Rendezvous-enabled printers
Connected
66
NetServer Pro
4. Select the desired printer, and the following pop-up menu displays the
printer’s manufacturer. Select Generic.
5. The printer is installed into the system successfully.
67
NetServer Pro
1.14 Technical Features
Advanced Features
ƒ Compact pocket size.
ƒ Compliant with USB 2.0 high-speed printing.
ƒ Fast 54Mbps WLAN connectivity based on IEEE 802.11g
wireless high-speed standard.
ƒ Multi protocol support is ideal for shared printing in mixed-LAN
environments.
ƒ Windows-based administrative program makes it possible to set
up in a few steps.
ƒ Latest MIB-II (RFC 1213) for SNMP standard management.
ƒ Offer LPR program for TCP/IP printing in Windows 95/98/ME.
ƒ IP assignment support for DHCP, BOOTP and RARP.
ƒ Support Web configuration.
ƒ Provide Flash memory for easy firmware upgrade.
ƒ Auto fallback data rate under noisy environment or longer range
distance.
ƒ Printing Access control and display.
ƒ E-mail notification for printer error messages; Support E-Mail
printing and FTP printing.
ƒ Ability to save print server configuration into hard drive for easy
access and backup without the hassle to reconfigure if setting is
altered.
ƒ Support IPP printing for Windows 2000/XP.
ƒ Support second http port for remote web configuration and IPP
printing.
ƒ Support UPnP (Universal Plug and Play) for Windows XP/2003.
ƒ Support Mac OS 10.2 “Rendezvous” – Zero-configuration feature.
68
NetServer Pro
System Hardware:
ƒ SDRAM: 8M Byte
ƒ Flash ROM: 2M Byte
ƒ 5V DC power adapter
ƒ LED Indicator: Power, USB, LAN, WLAN
Wireless Networking
ƒ Network Standards: Wireless LAN standard IEEE802.11g.
ƒ Network Data Transfer Rate: 54Mbps with fallback to 48, 36, 24,
18, 12, 11, 9, 6, 5.5, 2, and 1Mbps.
ƒ Network Mode: Support both Infrastructure and Ad-hoc mode.
Wired Networking
ƒ Network Interface: One 10/100 Fast Ethernet port (RJ-45
connector).
ƒ Network Data Transfer Rate: 100Mbps.
System Software:
ƒ Real-time OS
ƒ Transport Protocols : TCP/IP, SMB, NetBEUI, and AppleTalk.
ƒ TCP/IP Protocols Supported : BOOTP, SNMP, Telnet, FTP, LPD,
DHCP, and IPP.
Support OS:
ƒ Windows 95/98/ME, Windows NT, Windows 2000/XP/2003
ƒ NetWare 5.x (NDPS LPR remote printing)
ƒ HP-UX Unix, Sun O.S, Solaris, SCO Unix, AIX
ƒ Unixware and Linux
ƒ Mac OS, AppleTalk
Management
ƒ Standard: SNMP
ƒ MIBs: MIB-II (RFC 1213).
ƒ Utilities: PS-Utility, PS Wizard.
69
NetServer Pro
Operating environment
ƒ Operating temperature: 0°C ~ 50°C
ƒ Storage temperature: -25°C ~ 55°C
ƒ Humidity: 5% ~ 95% non-condensing
Minimum System Requirements
ƒ Operating System: Microsoft Windows® 98SE/ME/2000/XP
ƒ For Web Configuration: Java-enabled web browser, such as
Microsoft® Internet Explorer 5.0 and Netscape Navigator 6.0
1.15 Support
If you have any problems with this device, please consult the full manual
on CDRom. If you continue to have problems you should contact the
dealer where you bought this device. If you have any other questions you
can contact the Atlantis Land company directly at the following address:
Atlantis Land SpA
Viale De Gasperi, 122
20017 Mazzo di Rho(MI)
Tel: +39. 02.93906085, +39. 02.93907634(help desk)
Fax: +39. 02.93906161
Email: [email protected] or [email protected]
WWW: http://www.atlantis-land.com
70
NetServer Pro
71
NOTE
72
Atlantis Land S.p.A.
Viale De Gasperi, 122
Mazzo di Rho – MI – Italy
[email protected]
[email protected]
www.atlantis-land.com
Where solutions begin
Company certified ISO 9001:2000
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Languages