ETS-Lindgren | 1052 | Full Line Product Brochure - ETS

Full Line Product Brochure - ETS
TEST AND
MEASUREMENT
SOLUTIONS
TEST SYSTEMS
TEST CHAMBERS
COMPONENTS
ENGINEERING SERVICES
THE SUREST SOLUTION BY ANY MEASURE™
ets-lindgren.com
ABOUT US
If you use a cell phone, drive a car, listen to
music, or had an MRI scan, chances are
ETS-Lindgren made those experiences possible.
We design, manufacture, and provide:
● Systems and Components for Radio
Frequency (RF) Test and Measurement
● RF Isolated Environments for
Electromagnetic Compliance (EMC)
Measurement, Wireless and Microwave
Compliance and Performance Testing
● Acoustically Isolated Environments for
Sound Level Measurements, Audiology
Diagnostics, Broadcasting, and Security
Applications
● RF Shielding and Safety Solutions for
Magnetic-Resonance Imaging (MRI) Rooms
● RF Shielding for Electromagnetic Pulse
(EMP) and Tempest Defense Applications
● Systems to Measure Human Exposure to
Electromagnetic and Magnetic Sources
● Product Testing and Instrument Calibration
in Labs Accredited with A2LA, NVLAP, and
the CTIA
● Engineering, Consulting and Educational
Services
BEIJING CEDAR PARK EURA STEVENAGE TAUFKIRCHEN
AC C R E D I T ED
AC C R E D I TED
Calibration Laboratory
Certificate 1207.01
From our inception in 1995, ETS-Lindgren
has continuously grown in size, revenue, and
capability. We now employ more than 800
professionals at locations in the Americas,
Europe and the Middle East, and Asia.
In addition, we have a global network of
independent representatives and distributors
reaching into almost every corner of the world.
Our customers benefit with local support
from specialists who are backed by the global
resources of ETS-Lindgren.
ETS-Lindgren is a subsidiary of ESCO
Technologies Corporation (NYSE symbol ESE).
PRODUCT QUICK FINDER
PRODUCT
PAGE
Absorber . . . . 22
Accessories .
.
.
. 34
Amplifiers .
.
.
. 30
Antennas .
.
.
. 4
Chambers .
.
.
. 24
Doors .
.
.
. 14
Enclosures .
.
.
. 10
Power Line . . .
EMP . . .
Telephone, Communication,
Control and Signal Line .
. 16
. 18
GTEM Filters
. 20
.
.
.
. 26
Positioners .
Probes
and Monitors .
.
.
. 6
.
.
. 8
Services .
.
.
. 36
Shielding .
.
.
. 12
Software .
.
.
. 32
System Solutions .
.
. 28
ETS-Lindgren’s antennas are designed with the latest
computational modeling tools, manufactured with exacting
precision, and individually tested, characterized and/or
calibrated in our A2LA accredited lab.
www.ets-lindgren.com/antennas
4
ANTENNAS
Biconical and
MiniBicon Series
Omnidirectional broadband
antennas for EMC measurement
and spectrum monitoring.
Standard Gain, Octave,
and Conical Horn Series
High gain and linearly polarized. Ideal as reference antennas for immunity testing and
sources for tapered chambers.
Tuned Dipole Series
The “original” EMC antenna.
Accepted by many as the most
precise for EMC measurements.
Electric Monopole
(Rod) Series
Active and passive short
monopole-type antennas for
ELF to HF ranges. Ideal for
MIL-STD 461 and CISPR 25.
BiConiLogTM Series
Extremely broadband EMC
antennas for pre-scan and
compliance measurements.
Log Periodic Series
High gain, low VSWR broadband antennas. For EMC measurements and applications where
directivity is required.
Double-Ridged
Waveguide Horn Series
Open Boundary
Quadridge Horn Series
Multi-octave linearly polarized
horns with high gain.
Multi-octave dual linearly
polarized horns with high gain.
For sensing two orthogonal
field components.
Fixed Length,
Balanced Dipole Series
Precision Sleeve Dipole
& Resonant Loop Series
Reference dipole antennas for
wireless testing including GPS
and RFID characterization.
Designed to meet the CTIA
0.2 dB azimuth symmetry requirements for the ripple test and
calibration.
Pre-Amps
The most popular EMC emission antennas are available
with pre-amplifiers. These
units are calibrated as a single
active antenna system.
Custom Antenna
Solutions
We can custom design, test,
manufacture, and calibrate the
antenna solution that best fits
your needs.
Conical Log Spiral
A broadband circularly polarized antenna for sensing or
generating circularly
polarized waves.
Field Generating
Pyramidal Horn Series
Optimized to generate the
highest power density in the
near field.
Loop & Magnetic
Field Coil Series
Shielded and unshielded,
active and passive coils and
loop antennas, for ELF to HF
ranges.
Individually Calibrated
We calibrate each of our
EMC antennas at our A2LA
accredited lab in accordance
with the appropriate
standards.
5
ETS-Lindgren’s antenna towers and turntables
were the first commercially available units for EMC
measurement applications.
In addition to a being a leader in positioners for
EMC testing, we provide positioners for antenna
pattern measurement and wireless testing.
www.ets-lindgren.com/positioners
6
POSITIONERS
EMCenter with Optional
EMControl Module
Model 2170B
Antenna Tower
Model 2171B
Antenna Tower
Model 2175 MiniMastTM
Antenna Tower
*Shown with optional plug-in card modules
The EMCenterTM with the
optional EMControlTM module
allows for operation of up to
two ETS-Lindgren positioners.
Features centerline air polarization and variable speed operation
for enhanced positioning precision. 1 to 4 meter scan range.
A reduced footprint tower with
bore site capability, which keeps
the EUT within the beam of the
measurement antenna.
Model 1052
Manual Antenna Tower
4-TR Tripod Positioner
7-TR Tripod Positioner
Space-saving design allows for
use in compact chambers.
Model 1062
Manual Turntable
(optional cross boom shown)
Manually operated, portable
positioner where quick
measurements or pre-scans
are needed.
2165 LoProTM
Turntable
Indoor/outdoor use. This portable
turntable sits virtually flush with
the floor. 1.2 m diameter. Load
capacity: 272 kg (600 lb).
Model 2005
Single Axis Light-Duty
Positioning System
Economical solution for basic
azimuth (polar) pattern measurements of active and passive devices.
Features a low dielectric EUT
platform, variable speed operation. Load rating: 11.3 kg (25 lb).
Portable and collapsible tripod
for small to medium sized
antennas and probes.
2181 Series
Heavy-Duty Turntable
Wide footprint with increased
stability for physically large
antennas. Air polarization and
optional cross booms available.
2187 Series
Medium-Duty Turntable
Variable speed, indoor/outdoor
use: 2 to 6 m diameters, custom
units available. Standard model
load rating: 9,000 kg (19,841 lb).
Variable speed, indoor/outdoor
use: 2 to 3 m diameters, custom
units available. Standard model
load rating: 1,200 kg (2,645 lb).
Model 2020
Multi-Axis Heavy-Duty
Positioning System
Model 2115
Multi-Axis Medium-Duty
Positioning System
Custom heights available,
dependant upon measurement
requirements. Positioner
accommodates up to 35 kg
(75 lb) combined phantom and
DUT weight.
Custom heights available,
dependant upon measurement
requirements. Positioner for
DUTs weighing up to 11.3 kg
(25 lb).
Low profile, manually operated,
wood-topped turntable for pre-scan
measurements. 1.2 m diameter.
Load rating: 450 kg (1,000 lb).
2188 EuroProTM Series
Light-Duty Turntable
Variable speed, indoor use for height
critical installs: 1.2 to 2 m diameters,
custom units available. Standard
model load rating: 1,000 kg (2,200 lb).
Model 2110
Multi-Axis Light-Duty
Positioning System
Custom heights available,
dependant upon measurement
requirements. Positioner for
testing wireless handsets up to
.45 kg (1 lb).
7
ETS-Lindgren’s HI Series of Broadband E-Field probes meet or
exceed the requirements of today’s automotive, MIL-STD and
commercial EMC RF immunity standards.
The high level of performance offered by these probes meets today’s
requirements as well as tomorrow’s challenges.
www.ets-lindgren.com/probes
8
PROBES AND MONITORS
Field Monitors
Allows quick and easy gathering and
processing of data from all ETS-Lindgren
E-field probes.
Fiber Optic Converters
Allows a PC to be used for quick processing of data from ETS-Lindgren EMF
probes. See page 28 for ProbeViewTM EMF
Software.
Electric Field
Health and Safety Probes
Broadband electric probes for making RF
exposure measurements in the vicinity of
broadcast facilities and industrial RF sources.
Bulk Current
Injection Probes
Used to inject RF current into conductors
and cables of electrical and electronic equipment during susceptibility testing.
E-Field Probes
Either battery or laser powered, these
E-Field field probes enable fast and
accurate EMF measurements with industryleading performance specifications.
Low Frequency
Health and Safety Meters
Provides accurate measurements of
electromagnetic fields in low frequency
applications.
Magnetic Field
Health and Safety Probes
Broadband magnetic probes for making RF
exposure measurements in the vicinity of
broadcast facilities and industrial RF sources.
Current Probes
Accurately measures current flowing on a
wire or bundle of wires without requiring
a direct connection to the conductor(s).
Probe Stand
Designed for accurate and repeatable
probe positioning when performing field
uniformity calibrations.
Health and Safety Meters
Compact RF Survey Meters designed for
basic safety measurements in broadcast and
healthcare facilities.
Microwave Oven
Survey Meters
Provides accurate microwave oven leakage
measurements. Models include handheld,
bench top models and area monitors.
E & H Near Field
“Sniffer” Probe Set
Passive near field probe set designed as a
diagnostic aid for locating and characterizing sources of E and H field emissions.
9
The design and manufacture of our test enclosures is approached with a complete
understanding of every component part, the scientific principles of each, and the
ability to successfully integrate them for optimal performance.
www.ets-lindgren.com/enclosures
10
9
ENCLOSURES
Bench Top
Test Enclosures
Upright bench top system for general
RF testing of small to medium sized
DUTs. Can be customized with filter and
feedthrough options.
Access Point
Test Enclosure
Allows for Over-The-Air (OTA) testing
of transmit and receive functionality and
throughput performance.
Mini-Reverb
Test Enclosure
Convenient and affordable test
environment for product design and
development applications.
Copper Bench Top
Test Enclosure
A high performance, copper shielded
enclosure designed for fast, convenient
EMI/RFI testing and verification.
Shielded
Test Enclosures
Portable enclosures for making wireless
device OTA performance measurements.
For design verification, pre-certification,
and production line measurements.
Small Device
Acoustic Test Enclosures
Affordable option when critical measurements are not required. Utilized for testing
acoustic levels of small mechanical and
electronic assemblies.
Wireless Interface
Test Enclosure
For testing cell phone transmit and
receive functionality with or without
direct cable connection to the RF or data
ports.
Antenna Measurement
Test Enclosures
Fully anechoic RF enclosures for antenna
pattern measurements. Self-contained,
moveable, compact cart design.
Audiometric
Test Booths
ETS-Lindgren makes a variety of test
booths for the audiometric market. For
more information, please visit our website
at www.ets-lindgren.com/acoustics.
11
ETS-Lindgren is the proven leader with thousands of shielded
enclosures installed worldwide. We offer solutions for some
of the most demanding industrial, medical and government
shielding challenges.
www.ets-lindgren.com/shielding
12
RF SHIELDING
Series 71
Screen Rooms
Provides RF shielding in a
“hear-through, see-through” test
environment.
DEI Copper Screen
Shielded Enclosures
Provides high shielding performance in a “hear-through,
see-through” structure.
MRI
RF Shielding
High performance, verticallysupported modular enclosure in
copper, cell-type, or pan type
material options.
EMI/RFI Shielded
Waveguide Air Vents
Improve airflow and maintain
RF shielding effectiveness in
industrial and government test
environments.
Series 81 Shielded
Rooms/Government
Shielded Rooms
High performance modular
steel shielding system for the
best attenuation of magnetic and
electric fields, and plane waves.
DEI Government
Shielded Enclosures
Provides high shielding performance using various combinations of steel and copper.
MRI
Magnetic Shielding
Added to an RF shield to contain
portions of the MRI-generated
magnetic field. Silicon steel or
steel plate material options.
Waveguide
Feedthrough
(Pipe Penetrations)
Designed as a waveguide
penetration for signal lines
while maintaining RF shield
integrity.
Series 101 Pan-Type
Shielded Rooms
High performance modular
steel shielding system for the
best attenuation of magnetic and
electric fields, and plane waves.
Welded Shielded
Enclosures
Welded construction for the
most reliable and highest
performance available.
RF Floors
Available in monolithic and
modular cell-type, these RF
floors are the ideal foundation
for all RF shielded rooms.
Waveguide Filter
(Fiber Optic
Applications)
Designed to provide a means of
bringing fiber optic cables into a
shielded enclosure while maintaining the enclosures’ radio
frequency isolation integrity.
Series 101 Pan-Type
Anechoic Chamber
Shielding
Pan-type panel shielding for all
test & measurement applications.
TEMPEST/Government
Secure Applications
For high threat, classified applications, including TEMPEST/
government secure applications.
Magnetic Active
Compensation System
(MACS)
Cost-effective, maintenance-free
environmental magnetic field
cancellation solutions for high
resolution EM instrumentation.
EMP Shielding
Pulse Protected Systems (PPS)
with “Red Edge” technology,
provide protection against EMP
events.
13
ETS-Lindgren is the leading manufacturer of
RF shielded doors and windows for the test and
measurement, industrial shield and medical markets.
Automatic and manual swing and sliding doors are
available in both standard and custom configurations.
www.ets-lindgren.com/doors
14
RF DOORS AND WINDOWS
Single Knife Edge
Shielded Door
Double Knife Edge
Shielded Door
Single knife edge door with
proven performance and
reliability.
Double knife edge door with
proven performance and
reliability.
PHD Pneumatic
Shielded Hinged Door
PSD Pneumatic
Shielded Sliding Door
Pneumatically operated RF
shielded, hinged leaf door.
RFD-F/A-100
Shielded Swing Door
Excellent performance at
low magnetic field and up to
40 GHz (>100 dB). Can be
equipped with absorbers.
Pneumatic Shielded
Sliding Door for
Government Applications
Pneumatically operated allwelded access door for RF
shielded enclosures.
SRFSD-F/A-100
Shielded Door
For both chambers and rooms
where very large openings are
required.
Auto-SealTM II Fire Rated
Pneumatic Shielded Door
All-welded access door for RF
High performance shielded
shielded enclosures, secure
doors with RF-shielding, fire
facilities, or anechoic chambers. rating or acoustic treatment.
Auto-Latching
Shielded Door System
Maintains the high level of RF
shielding effectiveness with
auto latching convenience.
ASDS
Shielded Door
Economical, stainless-steel door,
designed for easy operation.
RFD-60
Shielded Swing Door
RFD-100
Shielded Swing Door
High performance swing door
with internal-type recessed
hardware and special hinges.
High performance swing door
with internal-type recessed
hardware and special hinges.
RFSD-100
Shielded Sliding Door
RFSD-F/A-100
Shielded Sliding Door
Shielding performance up to
40 GHz. Can be equipped with
ferrite/pyramid absorbers for
anechoic chamber requirements.
High performance sliding door
for anechoic chambers. Up to
3 m x 3 m size. Pneumatic
operation available.
SSD
Shielded Sliding Door
MRDS
Shielded Swing Door
Ideal when the maximum door
opening is required but limited
space prevents a swing door
from being used.
Designed to provide a reliable,
economical and lightweight
shielded door.
15
ETS-Lindgren manufactures a wide selection of general requirement,
special application, and custom power line filters in a broad range of
configurations, performances, and power levels.
All filters may be ordered with transient suppressors for improved
protection against voltage transients.
www.ets-lindgren.com/filters
16
FILTERS - POWER LINE
LRX Series Single Line
(US)
Individual circuit filters with
superior performance for
stringent requirements.
LRW Series Single Line
(US)
LRX Series Dual Line
(US)
Dual line single phase filters
with superior performance for
stringent requirements.
LRW Series Dual Line
(US)
LPRX Series Wall Mount
(US)
LFPRX Series Floor Stand
(US)
Multiple circuit wall mounted
panel filters with superior
performance for stringent
requirements.
Multiple circuit floor standing
panel filters with superior
performance for stringent
requirements.
LRE Series Multi Line
(US)
N192X Series Single Line
(European)
Single line filters providing
mid-performance for standard
requirements.
Dual line filters providing
mid-performance for standard
requirements.
Multiple circuit commercial
filters for moderate requirements. Available in two, three
and four circuits.
Very high performance single
line power filters.
N2510 Series Single Line
(European)
N182X Series Dual or
Multi Line (European)
N242X Series Dual Line
(European)
N500X Series Dual Line
(European)
Economical and compact high
current filters.
Compact, high performance
RFI/EMI filters offer high
protection for EMC. Dual or
quad line.
N502X and N503X Series
Dual Line (European)
High performance EMP and
EMI control filters for TEMPEST, EMP and EMC.
Low earth leakage, high
performance RFI/EMI filters
have extremely low current
leakage.
N255X Series Dual Line
(European)
N258X Series Multi Line
(European)
Very high performance RFI/EMI
filters for maximum protection in
TEMPEST, government secure
and EMP applications.
High current RFI/EMP filters
for use on main incoming three
phase and neutral supplies.
Ideal for EMP systems.
High performance EMI power
filters for a variety of EMC,
TEMPEST and government
secure applications.
N600X Series Dual Line
(European)
Very high performance EMC,
TEMPEST and government
secure application filters with
low power dissipation.
17
ETS-Lindgren’s pulse protected powerline filters with Red EdgeTM Technology protects
against damage to electronic equipment and loss of data caused by a sudden and
intense electromagnetic pulse (EMP). The filters provide excellent multi-stage, overvoltage and EMI/ RFI protection. ETS-Lindgren is the only manufacturer to have their
filters acceptance tested to the requirements of MIL-STD-188-125 by Little Mountain Test
Facility at Hill Air Force Base, in Ogden, Utah and are also listed by ETL to UL 1283.
www.ets-lindgren.com/EMPfilters
18
15
FILTERS - EMP
HEMP-2010
EMP powerline pulse protection filter.
10 Amp, 480V maximum voltage with
two wires.
HEMP-2060
EMP powerline pulse protection filter.
60 Amp, 480V maximum voltage with
two wires.
HEMP-4100
EMP powerline pulse protection filter.
100 Amp, 480V maximum voltage with
four wires.
HEMP-4x600
EMP powerline pulse protection filter.
600 Amp, 480V maximum voltage with
four wires.
HEMP-2030
EMP powerline pulse protection filter.
30 Amp, 480V maximum voltage with
two wires.
HEMP-4060
EMP powerline pulse protection filter.
60 Amp, 480V maximum voltage with
four wires.
HEMP-4250
EMP powerline pulse protection filter.
250 Amp, 480V maximum voltage with
four wires.
HEMP-4x800
EMP powerline pulse protection filter.
800 Amp, 480V maximum voltage with
four wires.
HEMP-4030
EMP powerline pulse protection filter.
30 Amp, 480V maximum voltage with
four wires.
HEMP-2100
EMP powerline pulse protection filter.
100 Amp, 480V maximum voltage with
two wires.
HEMP-4x400
EMP powerline pulse protection filter.
400 Amp, 480V maximum voltage with
four wires.
HEMP-4x1200
EMP powerline pulse protection filter.
1200 Amp, 480V maximum voltage with
four wires.
19
ETS-Lindgren manufactures the widest variety of telephone, communication,
data, control and signal line filters for an extensive range of applications.
All filters may be ordered with transient suppressors for improved protection
against voltage transients.
www.ets-lindgren.com/filters
17
20
COMMUNICATION,
FILTERS- TELEPHONE,
CONTROL AND SIGNAL FILTERS
LTC Series Dual or
Multi Line:
Control Systems (US)
Two to 12 line LTC filters for
in and outbound signal, sensor,
voice and data communication.
LTC Series Dual or
Multi Line:
Signal and Sensor (US)
LTC Series Dual or
Multi Line:
Digital Systems (US)
Two to 12 line LTC filters for
in and outbound signal, sensor,
voice and data communication.
LTC Series Dual or
Multi Line:
Telephone Line (US)
LTC Series Dual or
Multi Line:
P.A./Alarm Systems (US)
Two to 12 line LTC filters for
P.A. systems or alarm systems.
Signal, sensor, voice and data
communication.
LTC Series Dual or
Multi Line:
Specialty (US)
Two to 12 line LTC filters for
in and outbound signal, sensor,
voice and data communication.
LPTC Series Panels
and Cabinets for Filters
(US)
Two to 12 line LTC filters for
signal, sensor, voice and data
communication.
Two to 12 line LTC filters for
either digital or voice/analog
POTS.
N296X and N2972 Series
Single or Multi Line
(European)
N2460 Series Dual and
Multi Line (European)
N24X and N29X Series
(European)
L265X Series Capacitors
(European)
RFI/EMI digital analog data
filters for EMI, TEMPEST and
government secure applications.
RFI/EMI telephone filters for
EMI, EMP, TEMPEST and
government secure applications.
RFI/EMI feed through capacitors for use on mains supply
circuits and other DC and AC
supplies.
EMP and EMI control for
various circuits. N296X is
single line, N2972 is 10 line.
For communication lines entering and/or leaving shielded,
computer, communication terminal, and information facilities.
LTC Series Dual or
Multi Line:
Security Systems (US)
Panels and cabinets for dual
circuit LTC filters.
21
ETS-Lindgren’s anechoic absorber manufacturing plant is the largest in the
world and can produce more than 10.5 million board feet per year.
More importantly, we have the ability to create customized absorber with
special formulations and physical geometries to meet unique requirements.
Workstations running advanced numerical modeling software are used to
develop the right solution, which is then prototyped and tested to confirm
predicted results.
www.ets-lindgren.com/absorber
22
ABSORBER
Ferrite Tile
EMC Absorber
Precision machined ferrite tile
with a tuned dielectric backing
layer creates high performance
results.
EHP Pyramidal Series
Microwave Absorber
Designed for use over a
wide frequency for several
test applications.
Wedge Cut
Microwave Absorber
Used where pyramidal absorbers would provide too much
backscatter.
FlexSorbTM
Flexible Absorber
FlexSorb provides increased flexibility without affecting reflective
performance, power handling,
or fire retardant properties.
EHP Convoluted Series
Microwave Absorber
Convoluted front surface creates
a gradual transition from freespace to loaded substrate.
Walkway
Microwave Absorber
A walking surface for personnel, that is compatible with
anechoic chamber reflection
requirements.
DuraSorbTM Series
EMC Absorber
Hybrid polystyrene anechoic
absorber combining broadband
performance with rigid, closed
cell construction.
CRV Series
Microwave Absorber
Critical region curvilinear
absorber, optimized for broadband reflection suppression.
Flat Laminate
Microwave Absorber
Moderate performance. Flexible, easy to cut for placement
around positioners, nearfield
scanners, etc.
PCL Series EMC and
Microwave Absorber
Ultra broadband EMC/microwave absorber, optimized for
MIL-STD 461 applications.
HP Series
Microwave Absorber
High powered, low flammability absorber for high
vacuum applications.
Filter Foam
EMC Absorber
Suitable for outdoor use.
Available in pyramidal and
wedge and wedge-type cuts.
FerroSorbTM FS Series
EMC Absorber
Combines high performance
carbon-loaded foam absorber
with precision-manufactured
ferrite tile.
23
ETS-Lindgren has designed and installed
thousands of acoustic, EMC, RF microwave,
and wireless chambers and enclosures
worldwide. We have more than 75 patents in
shielding, absorber and related technologies.
www.ets-lindgren.com/chambers
24
CHAMBERS
FACTTM Series
EMC Chambers
An EMC test environment ideal
for most international commercial EMC testing, available in
3, 5 and 10 m sizes.
Antenna
Measurement Chambers
Rectangular or Tapered Chambers with a 360° degree phi/theta
Multi-Axis Positioning System.
Fully Anechoic
Acoustic Chambers
Precision-grade free-field
chambers, measuring sound
source directivity, frequency
response, and noise emissions.
Satellite, HiL and
Microwave Chambers
Specialty chambers for
hardware performance testing of
Aerospace and Defense systems.
Automotive
EMC Chambers
A specialized version of our
FACT family designed for
whole vehicle testing.
MIMO OTA
Measurement Chambers
A MIMO OTA system for
measurement of wireless
devices in a simulated multipath environment.
Hemi-Anechoic
Acoustic Chambers
A precise free-field environment used to measure sound
sources over a reflecting plane.
Near Field
Microwave Systems
Anechoic rooms for the
housing of Near-Field Scanners
used in the measurement of
electrically large antennas.
SpaceSaverTM Series
EMC Chambers
Small and compact chambers
for pre-compliance measurements and fully compliant
immunity testing.
SMARTTM Series
EMC Chambers
Reverberation chambers for
generating high fields over
large volumes. For immunity
measurement of large equipment.
Spherical Scanning
Measurement Chambers
Multi-Sensor Array
Measurement Chambers
Rectangular chamber with a
theta rotational arm for spherical
scanning of wireless devices.
Multi-sensor system providing
high speed testing of wireless
devices.
Reverberation
Acoustic Chambers
Designed to produce a nondirectional or diffused sound
field within the chamber.
RCS and Antenna
Compact Ranges
Chambers with specially
designed anechoic material
layouts to integrate reflectors
for radar and large antenna
measurements.
Predictable Field
Acoustic Chambers
An economical solution for
engineering or survey grade
tests allowed by many standards.
MIL-STD
EMC Chambers
A MIL-STD test environment,
specifically for MIL-STD 461
and RTCA DO-160
measurements.
25
GTEMs enable users to perform emissions and radiated immunity tests
in less time than an OATS or an anechoic chamber.
More than 400 GTEMs have been installed worldwide since 1989.
Attempts have been made to imitate the technology, but nothing has
achieved the success or acceptance of the GTEM.
www.ets-lindgren.com/gtem
26
GTEM!TM TEST CELLS
Model 5402
GTEM Test Cell
Compact, bench top sized, portable GTEM for smaller DUTs.
Model 5407
GTEM Test Cell
GTEM for testing medium to large DUTs.
Model 5405
GTEM Test Cell
GTEM for testing small to medium sized DUTs.
Model 5411
GTEM Test Cell
GTEM for testing large DUTs.
27
With full integration including test environments, instrumentation, and software,
we are the solutions providers for Wireless OTA and EMC test systems. With both
anechoic and reverberation options, ETS-Lindgren offers the ideal environment for
any testing requirement.
www.ets-lindgren.com/systems
28
SYSTEM SOLUTIONS
AMS-7000 Portable
Test System (Reverb)
Portable test system designed to
perform accurate and repeatable
SISO TRP, TIS and Throughput
measurements.
AMS-8055 Portable
Test System (Anechoic)
AMS-8040 Portable
Test System (Anechoic)
AMS-8041 Portable
Test System (Anechoic)
AMS-8050 Portable
Test System (Anechoic)
Portable test system including
an anechoic RF enclosure and
2-axis positioner; performs active
measurements.
Portable test system including an
anechoic RF enclosure and 2-axis
positioner; performs active and
passive measurements.
Portable test system including
an anechoic RF enclosure;
designed for wireless
pre-compliance measurements.
AMS-7200
Test System (Reverb)
A portable MIMO OTA system
for measurement of wireless
devices in a simulated multipath environment.
Test system designed to perform
accurate and repeatable SISO
TRP, TIS and Throughput measurements.
AMS-8600 Wireless APM
Test System (Anechoic)
AMS-8700 Wireless APM
Test System (Anechoic)
Test system including a compact
tapered chamber with a 360°
degree phi/theta Multi-Axis
Positioning System.
EMC Chamber
Test Systems
A MIMO OTA system for
measurement of wireless
devices in a simulated multipath environment.
GTEM
Test Systems
AMS-8100 APM
Test System (Anechoic)
Test system including a compact, rectangular chamber.
Designed for testing general
antenna devices.
AMS-8500 Wireless APM
Test System (Anechoic)
Test system including a full-size
rectangular chambers with a
360° degree phi/theta MultiAxis Positioning System.
AMS-8800 Wireless APM
Test System (Anechoic)
AMS-8900 Multi-sensor
Test System (Anechoic)
Rectangular chamber test system
with a theta rotational arm for
spherical scanning of wireless
devices.
Multi-sensor system providing
high speed testing of wireless
devices. Above shown with
MIMO test system option.
EMCenter™
Modular RF Platform
Shown with optional plug-in card modules
Complete EMC system integration that simplifies testing in
anechoic chambers, including
management of towers and
turntables.
Complete systems integration that simplifies testing in
GTEM cells, including TEM
and EUT coupling functions.
Flexible measuring platform with an integral microcontroller, touch
screen control, and a backplane that accepts up to seven plug-in
card modules; each one a specialized RF instrument. Everything is
contained in a 3U high chassis that can be used alone on a desktop
or mounted in a rack.
29
ETS-Lindgren offers a wide range of RF power amplifiers for any EMC
test application. These amplifiers produce excellent output power
levels, while maintaining an efficient performance level.
www.ets-lindgren.com/amplifiers
30
AMPLIFIER SOLUTIONS
Automotive Amplifier Solutions
ETS-Lindgren’s automotive power amplifiers are designed
primarily for automotive applications that include ISO 11452-2
testing requirements.
DO-160 Amplifier Solutions
ETS-Lindgren’s DO-160 power amplifiers are designed
primarily for DO-160 testing requirements.
Commercial EMC Amplifier Solutions
ETS-Lindgren commercial EMC power amplifiers are
designed primarily for commercial applications that include
IEC/EN 61000-4-3 and IEC/EN 61000-4-6 test requirements.
MIL-STD Amplifier Solutions
ETS-Lindgren’s MIL-STD power amplifiers are designed
primarily for military applications that include MIL-STD 461
CS114 testing requirements.
EMField™ Generator
The EMField is a unique, integrated solution for Radiated Immunity
testing including IEC/EN 61000‑4‑3. It combines an amplifier, directional couplers, and an antenna array into one remarkable, simplified
design. Almost all of the generated power is converted into usable
field strength.
31
ETS-Lindgren products are developed by software
professionals with the know-how gained from designing,
installing and supporting EMC, EMF and wireless test
software applications for hundreds of customers worldwide.
www.ets-lindgren.com/software
32
SOFTWARE
EMQuestTM
Antenna Measurement
Software
Antenna measurement software offering a wide range of fully parameterized test methods for measuring basic antenna performance
metrics as well as testing both radiated and conducted performance
of various wireless devices.
ProbeViewTM EMF
Probe Software
TILE!TM
Totally Integrated Laboratory Environment
Software
Lets you manage complex test sequences with drag-n-drop
simplicity. TILE! software is an integrated approach to designing,
performing, reporting and archiving complex electromagnetic
compatibility (EMC) tests.
Software
Maintenance Support Program
ADD IN THE
MAINTENANCE
PROGRAM INFO?
Windows-based graphical analysis tool for real-time or postmeasurement data sets. ProbeView reads data from EMF Probes
and offers user-selectable viewing options (numeric or graphical),
selectable logging, simultaneous display of peak-hold and current field strength data, and graphical representations of field
strength versus time.
ETS-Lindgren offers a maintenance support program for both
TILE and EMQuest software. Maintenance program features
support, software updates, enhancements, and online user group
access, based on software product.
33
ETS-Lindgren provides engineers with test and
measurement accessories for EMC, wireless,
microwave, acoustic and medical markets.
www.ets-lindgren.com/accessories
34
ACCESSORIES
Product Cases
Provides a safe way to store and ship delicate equipment. Designed to have
uniform wall strength and thick, reinforced
corners. Moisture and chemical resistant.
Model 4330 (Pinhole)
Model 4340 (CCTV)
Camera Systems
Choice of pinhole, mounted on a bulkhead
feedthrough panel (Model 4330) or shielded
camera designed for both emission and
immunity testing conditions (Model 4340).
LED Chamber Lighting
Offers RF noise-free operation, low heat
displacement and long life. Usable in new
or existing EMC, Microwave, Wireless, and
Acoustic test chambers.
Phantom Heads
Simulating the average human head, these
measurement phantom heads are designed
for Over-the-Air (OTA) performance testing within a chamber.
RF Attenuation Meter
Designed for shielded effectiveness
measurements of shielded enclosures.
Makes measurements at four selectable
frequencies.
Line Impedance Stabilization
Networks (LISN)
Line Impedance Stabilization Networks
(LISN) are low pass filter networks used to
measure common mode conducted emissions
from power lines. Several models are offered.
Fiber Optic Chamber Lighting
Cost effective solution for illuminating
the interior of anechoic chambers with
cool white light.
Phantom Head and Hand Kits
These kits combine phantom head and
phantom hands to provide a CTIA 3.1 compliant grip. Available hand designs include
grips for mono block and slide for voice,
fold for voice, data mode and PDA devices.
Measurement spacers also available.
Universal Spherical
Dipole Source
Assists in maintaining the integrity of a
chamber or OATS environment by allowing
a radiated emissions field profile to be created and compared with previous profiles.
6400 Series Helmholtz Coils
Helmholtz Coils create an extremely uniform
low frequency magnetic field between and in
the center of the coils. Standard models and
custom configurations available.
Low Reflection EUT Tables
Lightweight EUT table designed to
produce low reflection in EMC test
environments. Available in two designs
(special order product, call for details).
Phantom Hand Only Kits
These hands are made of the same dielectric materials as in our head and hand kits,
however these hands mount directly to the
positioning device. Available grips include
mono block and slide for voice, fold for
voice, data mode and PDA devices.
35
ETS-Lindgren offers a wide breadth of services. From education to
consulting, calibration to testing, our dedicated experts are committed
to the success of the projects we work on.
www.ets-lindgren.com/services
36
SERVICES
Engineering and Consulting
ETS-Lindgren has the in-house experts that can design integrated
systems, manufacture custom components, perform site surveys
(including EMI and vibration), and oversee project management.
Product Calibration
Our A2LA accredited calibration facility can perform calibrations
on most manufacturers’ EMC antennas, current clamps, probes,
LISNs, cables, and attenuators. All calibrations include actual
measured data and a signed Certificate of Calibration.
Maintenance
ETS-Lindgren offers Calibration Services Plus!TM maintenance
program for most test and measurement components. Additionally,
on-site maintenance and repair of chambers, doors, and positioners
can be performed to ensure equipment operates properly.
Educational Programs
From basics to more advanced topics, three-day hands-on classes are
available for EMC, MIL-STD, and Wireless OTA testing.
Product Repair
ETS-Lindgren offers repair of most components, including
antennas, probes, and current clamps. On-site repair is also
available for positioners, doors, and chambers.
Testing Services
Acoustic and wireless product testing is available at ETS-Lindgren.
Acoustic testing is performed in our NVLAP accredited laboratory
(NVLAP lab code 100286-0). In 2002, we became the first CTIA
Authorized Test Lab (CATL) for mobile station OTA performance
testing. We also offer A-GPS and MIMO testing.
37
38
GLOBAL PRESENCE, LOCAL SUPPORT
Corporate Headquarters
Regional Sales Office
Manufacturing Facility
39
SALES AND SUPPORT OFFICES
UNITED STATES – TEXAS
FRANCE
Cedar Park, TX
Boulogne Billancourt
+1.512.531.6400 Phone
+33 (0) 1 74 31 10 21 Phone
+1.512.531.6500 Fax
france@ets-lindgren.com
info@ets-lindgren.com
UNITED ARAB EMIRATES
UNITED STATES – ILLINOIS
Dubai
Wood Dale, IL
+971.55.610.4055 Phone
+1.630.307.7200 Phone
uae@ets-lindgren.com
+1.630.307.7571 Fax
INDIA
info@ets-lindgren.com
Bangalore
UNITED STATES – WISCONSIN
+91.80.4341.8600 Phone
Minocqua, WI
+91.80.4341.8611 Fax
+1.715.356.2022 Phone
indiainfo@ets-lindgren.com
+1.715.356.2023 Fax
JAPAN
info@ets-lindgren.com
Tokyo
BRAZIL
+81.3.3813.7100 Phone
São Paulo
+81.3.3813.8068 Fax
+55(11)3123.9700 Phone
japan@ets-lindgren.com
+55(11)3123-9078 Fax
SINGAPORE
info@ets-lindgren.com
Singapore
GERMANY
+65.6391.0912 Phone
Taufkirchen
+65.6298.9509 Fax
+49.89.614171.0 Phone
singapore@ets-lindgren.com
+49.89.614171.71 Fax
CHINA
germany@ets-lindgren.com
Beijing
FINLAND
+86(10)8273.0877 Phone
Eura
+86(10)8273.0880 Fax
+358.2.8383.300 Phone
china@ets-lindgren.com
+358.2.8651.233 Fax
TAIWAN
euinfo@ets-lindgren.com
Taipei
UNITED KINGDOM
+886.2.27023389 Phone
Stevenage, Hertfordshire
+886.2.27023055 Fax
+44.1438.730.700 Phone
taiwan@ets-lindgren.com
+44.1438.730.751 Fax
uk@ets-lindgren.com
THE SUREST SOLUTION BY ANY MEASURE™
ets-lindgren.com
Information presented is subject to change. Actual product appearance may vary from representational photographs and
illustrations shown. Contact the ETS-Lindgren Sales Department for current specifications.
2/15 100/RR © 2015 ETS-Lindgren Rev. G
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising