PRODUCT GUIDE
TERMS AND CONDITIONS
2015
PRODUCT GUIDE
WITH LIST PRICING
FOR ORDERS:
FAX (818) 206-6190
TOLL-FREE (877) 850-3449
E-mail: orders@securakey.com
20301 Nordhoff Street, Chatsworth, CA 91311
PHONE (818) 882-0020 • FAX (818) 882-7052
TOLL-FREE (800) 891-0020
www.securakey.com
mail@securakey.com
Pricing and Specifications subject to change without notice
Smart­. Reliable. Secure.
©COPYRIGHT 2014
PRODUCT GUIDE
2015 - LIST PRICING
MULTI-DOOR ACCESS CONTROL SYSTEMS
2-DOOR ACCESS CONTROL PANELS SK-ACPE-LE
2-Door Control Panel, w/Ethernet, 10” X 11” Enclosure, Circuit Board and Connectors SK-ACPE-NE
2-Door Control Panel, w/Ethernet, No Enclosure, Circuit Board and Connectors
SK-ACPE-PCBA
Board only for SK-ACPE, No Enclosure, no connectors (order as replacement for control panel board)
Complete 2-Door Kits with e*Tag Technology (Just Add Locks and Cable)
951.72
887.26
854.40
e*ACCESS1
Starter Kit w/ SK-ACPE, Two e*Tag Mullion Readers (ET8-RO-W-M), Software, RS-232E cable, DC Supply, 25 ETCI04 Cards
e*ACCESS2
Starter Kit w/ SK-ACPE, Two e*Tag switchplate Readers (ET4-WXS), Software, RS-232E cable, DC Supply, 25 ETCI04 Cards
e*ACCESS3
Add-On Kit w/ SK-ACPE, Two e*Tag Mullion Readers (ET8-RO-W-M), DC Supply
e*ACCESS4
Add-On Kit w/ SK-ACPE, Two e*Tag switchplate Readers (ET4-WXS), DC Supply
e*ACCESS5
Starter Kit w/ SK-ACPE, Two e*Tag Mullion Readers (ET8-RO-W-M), Software, RS-232E cable, DC Supply (no cards)
e*ACCESS6
Starter Kit w/ SK-ACPE, Two e*Tag switchplate Readers (ET4-WXS), Software, RS-232E cable, DC Supply (no cards)
Complete 2-Door Kits with Radio Key® Technology (Just Add Locks and Cable)
1,195.42
1,263.90
1,026.95
1,081.83
1,090.61
1,170.11
SYSKIT-1
SYSKIT-2
SYSKIT-3
SYSKIT-4
SYSKIT-5
SYSKIT-6
1,287.48
1,325.67
1,052.85
1,107.62
1,111.83
1,216.72
Starter Kit w/ SK-ACPE, Two RK-WM Readers, Software, RS-232E cable, DC Supply, 25 RKCM02 Cards
Starter Kit w SK-ACPE, Two RK-WS Readers, Software, RS-232E cable, DC Supply, 25 RKCM02 Cards
Add-On Kit w/ SK-ACPE, Two RK-WM Readers, DC Supply,
Add-On Kit w/ SK-ACPE, Two RK-WS Readers, DC Supply,
Starter Kit w/ SK-ACPE, Two RK-WM Readers, Software, RS-232E cable, DC Supply (no cards)
Starter Kit w/ SK-ACPE, Two RK-WS Readers, Software, RS-232E cable, DC Supply (no cards)
MULTI-DOOR ACCESS CONTROL PANELS - Expand up to 16 doors
SK-MRCP-LE
NOVA.16 Multi-Reader Control Panel, 10” x 11” Enclosure, PCBA and connectors
SK-MRCP-NE
NOVA.16 Multi-Reader Control Panel, No Enclosure, PCBA and connectors
SK-MRCP-PCBA
NOVA.16 Multi-Reader Control Panel, No Enclosure, PCBA, no connectors
Complete 4-Door Kits with Radio Key® Technology (Just Add Locks and Cable and Cards)
1,514.28
1,439.27
1,407.36
SK-MRCP-4RKDT-M
NOVA.16 4-door Kit, Panel, Software, Power Supply, 4 RKDT-SR (mullion) dual-tech prox smart readers (cards not incl). SK-MRCP-4RKDT-S
NOVA.16 4-door Kit, Panel, Software, Power Supply, 4 RKDT-SR (wall switch) dual-tech prox smart readers (cards not incl). Complete 4-Door Kits with e*Tag Technology (Just Add Locks and Cable and Cards)
2,466.67
2,619.05
SK-MRCP-4ET8SR-M
SK-MRCP-4ET8SR-S
2,466.67
2,619.05
NOVA.16 4-door Kit, Panel, Software, Power Supply, 4 e*Tag (mullion) contactless smart readers (cards not incl). NOVA.16 4-door Kit, Panel, Software, Power Supply, 4 e*Tag (wall switch) contactless smart readers (cards not incl). SMART READERS - Use with NOVA.16 (SK-MRCP) - e*Tag® (ET-x) Technology
ET8-SR-X-M
Single-door Controller, RS485, e*Tag® Contactless Technology, mullion, black ET8-SR-X-D-I
Single-door Controller, RS485, e*Tag® Contactless Technology, switchplate, Decorator (indoor), Ivory
ET8-SR-X-D-W
Single-door Controller, RS485, e*Tag® Contactless Technology, switchplate, Decorator (indoor), white
Accessories for e*Tag® Smart Readers
SK-SR1
SecuRelay™ Intelligent Relay Module- Use with Smart Readers for Exterior Applications
333.34
371.43
371.43
86.66
Cards / Key Tags for e*Tag® Smart Readers and e*Access Kits (see above) ETCI04
ETCI04-PK25
ETCI04-1000+
ETST03
ETST03-PK25
ETST03-1000+
ETKT03
ETKT03-1000+
ETAT03
2
C
C
C
C
C
C
C
Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code, Card ID Number range
Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces, unless buying a prepackaged set. Prepackaged card/tag sets do not allow choice of facility code or card ID numbers. All Cards must be ordered in increments of 25 (i.e.: 50, 75, 100, etc)
(For custom graphics a minimum of 250 cards is required, see page 8 for further details). ISO Cards, Encrypted Wiegand Data. Secura Key logo standard, plain white/glossy is available. Options: Slot (Portrait/Landscape), Photo Flap, Mag Stripe (1/2”, 2750 Oerstad), Custom Artwork,
Signature Panel (Requires SK-SIGSETUP), Barcode (requires complete technical specification)
Pack of 25 e*Tag® cards, pre-encoded facility code and sequential numbers
LOT card orders of 1000 or more, one facility code, sequentially numbered with no gaps
Compact Key Tag, Encrypted Wiegand Data
Options: Barcode (requires complete technical specification), Custom Artwork
Pack of 25 e*Tag® key tags, pre-encoded facility code and sequential numbers
LOT card orders of 1000 or more, one facility code, sequentially numbered with no gaps
Bullnose Key Tag, Encrypted Wiegand Data
LOT orders of 1000 or more, one facility code, sequentially numbered with no gaps
Options: Punch (Hole/Moon), Eyelet, Barcode (requires complete technical specification) Custom Artwork
Adhesive Tag, Encrypted Wiegand Data
Minimum order is $50.00. Minimum card/tag order is 50 pieces, unless buying a prepackaged set.
Additional cards must be ordered in increments of 25 pieces (50,75,100, etc.)
Prepackaged card/tag sets do not allow choice of facility code or card ID numbers.
FED-EX PICK UP CHARGE: $12.00 - DROP SHIP CHARGE: $7.00 - ALL SHIPMENTS ARE F.O.B. FACTORY
C = CUSTOM ORDER. CALL FOR DETAILS. ALL OTHER PRODUCTS ARE IN STOCK.
4.63
115.75
3.93
5.00
125.00
4.25
5.08
4.32
2.44
PRODUCT GUIDE
2015 - LIST PRICING
SMART READERS - Use with NOVA.16 (SK-MRCP)- Radio Key® (RK-x) Technology
RKDT-SR-M
Single-door Controller, RS485, Radio Key® & HID Proximity, mullion, black
RKDT-SR-S
Single-door Controller, RS485, Radio Key® & HID Proximity, switchplate, black
Accessories For Smart Readers
SK-SR1
SecuRelay™ Intelligent Relay Module for Exterior Applications
RKCI02
RKCI-02-1000+
RKCM02
RKCM-02-1000+
RKCM-02-PK25
RKKT02
RKKT-02-PK25
RKKT-02-1000+
Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code, Card ID Number range
Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces, unless buying a prepackaged set. Prepackaged card/tag sets do not allow choice of facility code or card ID numbers. All Cards must be ordered in increments of 25 (i.e.: 50, 75, 100, etc)
(For custom graphics a minimum of 250 cards is required, see page 8 for further details). ISO Cards, Field Printable, Sequentially Numbered w/ Facility Code
LOT card orders of 1000 or more, one facility code, sequentially numbered with no gaps
Options: Slot (Portrait/Landscape), Photo Flap, Mag Stripe (1/2”, 2750 Oerstad), Custom Artwork
Signature Panel (Requires SK-SIGSETUP), Barcode (requires complete technical specification)
Molded “Clamshell” Cards, Sequentially Numbered w/ Facility Code Lot card orders of 1000 or more. One facility code and sequential numbers, with no gaps.
Pack of 25 molded cards, 26-bit, pre-encoded facility code and sequential numbers
Key Tags, Black Plastic, Sequentially Numbered w/ Facility Code Pack of 25 key tags, 26-bit, pre-encoded facility code and sequential numbers
Lot tag orders of 1000 or more. One facility code and sequential numbers, with no gaps. 333.34
371.43
86.66
Cards / Key Tags for Radio Key® Smart Readers & SYS-KITS (see above)
C
C
C
C
C
C
4.69
3.98
2.94
2.49
73.50
5.08
127.00
4.32
SOFTWARE
SKNETDM
Basic SK-NET™ Software w/ Disk & Manual (allows 1 TCP/IP connection)
SKNETMLD
SK-NET™ w/ Multi-Location, Dial-Up and multiple TCP/IP connections
For 1 User, includes ID Badge Printing Capability
SK-NET-MLD-UPGRADE Upgrade an existing SK-NET-MLD to latest version (must include serial number from customer’s current software)
SK-NET-MLD-CS2
C SK-NET™ Multi-Location Client/Server License For 2 Users, includes ID Badge Printing Capability
SK-NET-MLD-CS5
C SK-NET™ Multi-Location Client/Server License For 5 Users, includes ID Badge Printing Capability
SK-NET-MLD-CS10
C SK-NET™ Multi-Location Client/Server License For 10 Users, includes ID Badge Printing Capability
SK-NET-MLD-CS15
C SK-NET™ Multi-Location Client/Server License For 15 Users, includes ID Badge Printing Capability
Client/Server Database (ADS) Version Upgrade 9-to-11 (to add clients to older versions SK-NET-MLD)* (call factory for details)
82.22
433.50
186.38
1,004.34
1,812.86
3,273.16
4,655.60
SK-ADS-VUP9-11/2
C Upgrade ADS from Version 9 to 11 for 2 users
SK-ADS-VUP9-11/5
C Upgrade ADS from Version 9 to 11 for 5 users
SK-ADS-VUP9-11/10
C Upgrade ADS from Version 9 to 11 for 10 users
SK-ADS-VUP9-11/15
C Upgrade ADS from Version 9 to 11 for 15 users
Client/Server Database (ADS) Version Upgrade 10-to-11 (to add clients to older versions SK-NET-MLD)* (call factory for details)
702.55
747.87
1,382.43
2,084.98
SK-ADS-VUP10-11/2
C Upgrade ADS from Version 10 to 11 for 2 users
SK-ADS-VUP10-11/5
C Upgrade ADS from Version 10 to 11 for 5 users
SK-ADS-VUP10-11/10
C Upgrade ADS from Version 10 to 11 for 10 users
SK-ADS-VUP10-11/15
C Upgrade ADS from Version 10 to 11 for 15 users
*Consult Technical Support Before Ordering
System Expansion for Existing SK-NET-MLD CS software
351.28
373.94
691.22
1,042.50
SK-ADS-EXP1-2
SK-ADS-EXP2-5
SK-ADS-EXP2-10
SK-ADS-EXP2-15
SK-ADS-EXP5-10
SK-ADS-EXP5-15
SK-ADS-EXP10-15
609.63
951.84
2,538.24
4,124.64
1,586.40
2,946.17
1,586.40
C
C
C
C
C
C
C
Expand Existing SK-NET-MLD to 2 Users
Expand Existing SK-NET-MLD CS2 from 2 Users to 5 Users
Expand Existing SK-NET-MLD CS2 from 2 Users to 10 Users
Expand Existing SK-NET-MLD CS2 from 2 Users to 15 Users
Expand Existing SK-NET-MLD CS5 from 5 Users to 10 Users
Expand Existing SK-NET-MLD CS5 from 5 Users to 15 Users
Expand Existing SK-NET-MLD CS10 from 10 Users to 15 Users
Minimum order is $50.00. Minimum card/tag order is 50 pieces, unless buying a prepackaged set.
Additional cards must be ordered in increments of 25 pieces (50,75,100, etc.)
Prepackaged card/tag sets do not allow choice of facility code or card ID numbers.
FED-EX PICK UP CHARGE: $12.00 - DROP SHIP CHARGE: $7.00 - ALL SHIPMENTS ARE F.O.B. FACTORY
C = CUSTOM ORDER. CALL FOR DETAILS. ALL OTHER PRODUCTS ARE IN STOCK.
3
PRODUCT GUIDE
2015 - LIST PRICING
Communications Accessories SK-PLUG9
SKQUICKCONN
NETCONVP
NETCONV
SKMDM
SK-LAN
SK-LAN-MOD
SK-USB
SK-WLSE-MOD SK-WLS-MOD
SK-ACP-CON
SK-WIO-1
Other Accessories
DB9 Pigtail Computer Connector (for computers with COM port or SK-USB)
DB9 to RJ11 6’ cable - Laptop to SK-ACP or 28SA+ (not used with SK-ACPE)
RS-485 Converter with Power Supply (Required When Computer Is >100’ From SK-ACPE, SK-MRCP or 28SA+)
RS-485 Converter without Power Supply
56K Baud External Modem with Power Supply (Requires SK-NET-MLD software) Use with SK-ACPE or SK-MRCP.
TCP/IP External Device Server with Power Supply 1 (not used with SK-ACPE). Use with older SK-ACPs.
Serial-to-Ethernet adapter, plugs into SK-ACP New Revision. 1,2 (not used with SK-ACPE)
USB-to-Serial Converter (For Computers w/o a COM Port)
802.11 b/g LAN interface, plugs into CPU board at J12, use with SK-MRCP or SK-ACPE
Serial-to-Wireless LAN adapter (802.11), plugs into SK-ACP New Revision. 1, 2 (not used with SK-ACPE)
Complete set of connectors for SK-ACP(E)-PCBA
Single-door interface, RS-485, Wiegand Input, use with SK-MRCP, fits in US J-Box
1
More than one TCP/IP connection requires SK-NET-MLD software
2
LAN adapters do not work with older SK-ACPs or SK-ACPEs- call Factory for details.
New Revision SK-ACP has larger 5A strike relays.
When using LAN/WLS modules SK-ACP requires 1 Amp Power Supply.
36.61
28.29
333.68
304.50
467.37
521.37
270.57
137.36
309.00
572.37
30.31
238.13
SK-ACP-ENC
SK-ACP-PS
SK-24VDC
SK-BAT
SK-DCPWR
SK-XFRMR
SKLOCK
DTK-XR
DTK-CR
SK-TS-CP
RS-232E
10 x 11” Enclosure for SK-ACPE, MRCP etc, beige, no lock, no tamper switch.
24 VDC Plug-In Power Supply & 4.0 AH Standby Battery. Use with SK-ACPE or SK-MRCP.
24 VDC Plug-In Power Supply, 1 Amp. Use with SK-ACPE or SK-MRCP.
4.0 AH, 12 VDC Battery. Use with SK-ACPE or SK-MRCP.
12VDC 1.2 A Power Supply Board (Use w/ SK-XFRMR)
16.5 VAC, 40 VA Plug-In Transformer (Use w/ SK-DCPWR, or connect directly to SK-MRCP or SK-ACPE)
Lock & Key Set For SK-ACP(E) - (included with SK-MRCP)
Surge Suppressor, Power & Communication Lines. Use with SK-ACPE or SK-MRCP.
Surge Suppressor, Card Reader or Keypad. Use with SK-ACPE only. Enclosure Tamper Switch, use with SK-ACPE (included with SK-MRCP)
Connects 4-Pin J11 MTA connector to DB9, 6 ft long, use with SK-MRCP, SK-ACPE
101.05
75.55
24.98
34.34
34.34
24.04
13.74
162.20
120.77
20.21
19.62
READERS WITH WIEGAND OUTPUT (Use with SK-ACPE only) e*Tag® HIGH FREQUENCY CONTACTLESS SMART CARD READERS
ET4-WXM
e*Tag® Contactless Smart Card Reader/Writer, 13.56 MHz ISO 15693, Mullion, S-shaped, Black
ET4-WXS
e*Tag® Contactless Smart Card Reader/Writer, 13.56 MHz ISO 15693, Switchplate, Beige
ET8-RO-W-D-W
e*Tag® Contactless Smart Card Reader, 13.56 MHz, Decorator Style-White
ET8-RO-W-D-I
e*Tag® Contactless Smart Card Reader, 13.56 MHz, Decorator Style-Ivory
ET8-RO-W-M
e*Tag® Contactless Smart Card Reader, 13.56 MHz, Mullion, Rectangular, Black
ET9-RO-W-MR
e*Tag® Contactless Smart Card Reader, 13.56 MHz, Mid-range, Black *** REDUCED PRICING***
Accessories for ET4-WXS
RK-BB
RK-GM
Back box / Spacer for ET4-WXS, Beige Glass-Mount Kit for ET4-WXS
168.03
190.64
122.79
122.79
128.27
156.21
21.95
10.66
Cards / Key Tags for e*Tag® Contactless Smart Card Readers ETCI04
ETCI04-PK25
ETCI04-1000+
ETST03
ETST03-PK25
ETST03-1000+
ETKT03
ETKT03-1000+
ETAT03
4
C
C
C
C
C
C
C
Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code, Card ID Number range
Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces, unless buying a prepackaged set. Prepackaged card/tag sets do not allow choice of facility code or card ID numbers. All Cards must be ordered in increments of 25 (i.e.: 50, 75, 100, etc)
(For custom graphics a minimum of 250 cards is required, see page 8 for further details). ISO Cards, Encrypted Wiegand Data. Secura Key logo standard, plain white/glossy is available. Options: Slot (Portrait/Landscape), Photo Flap, Mag Stripe (1/2”, 2750 Oerstad), Custom Artwork, Signature Panel (Requires SK-SIGSETUP), Barcode (requires complete technical specification)
Pack of 25 e*Tag® cards, pre-encoded facility code and sequential numbers
LOT card orders of 1000 or more, one facility code, sequentially numbered with no gaps
Compact Key Tag, Encrypted Wiegand Data
Options: Barcode (requires complete technical specification), Custom Artwork
Pack of 25 e*Tag® key tags, pre-encoded facility code and sequential numbers
LOT card orders of 1000 or more, one facility code, sequentially numbered with no gaps
Bullnose Key Tag, Encrypted Wiegand Data
LOT orders of 1000 or more, one facility code, sequentially numbered with no gaps
Options: Punch (Hole/Moon), Eyelet, Barcode (requires complete technical specification)
Adhesive Tag, Encrypted Wiegand Data
Minimum order is $50.00. Minimum card/tag order is 50 pieces, unless buying a prepackaged set.
Additional cards must be ordered in increments of 25 pieces (50,75,100, etc.)
Prepackaged card/tag sets do not allow choice of facility code or card ID numbers.
FED-EX PICK UP CHARGE: $12.00 - DROP SHIP CHARGE: $7.00 - ALL SHIPMENTS ARE F.O.B. FACTORY
C = CUSTOM ORDER. CALL FOR DETAILS. ALL OTHER PRODUCTS ARE IN STOCK.
4.63
115.75
3.93
5.00
125.00
4.25
5.08
4.32
2.44
PRODUCT GUIDE
2015 - LIST PRICING
RADIO KEY® LOW FREQUENCY PROXIMITY READERS
RKWM
Proximity Reader, Mullion, 125 KHz, Black
RKWS
Proximity Reader, Switchplate, 125 KHz, Beige
RKWL
Proximity Reader, 12” X 12”, 125 KHz, Extended Range, Black
RKDT-WM
Proximity Reader (Dual Technology), Mullion, 125 KHz, Black1
RKDT-WS
Proximity Reader (Dual Technology), Switchplate, 125 KHz, Beige1
1
Reads Secura Key 26 or 32-bit cards and HID 26 bit and other HID non-proprietary formats up to 37 bits. Accessories For RK-WS and RK-WL
RK-BB
RK-GM
SK-DCPWR
SK-XFRMR
159.95
181.49
635.48
175.09
198.66
Backbox / Spacer For RK-WS, Beige
Glass-Mount Kit For RK-WS
12VDC 1.2 A Power Supply Board for RK-WL (Use w/SK-XFRMR)
16.5 VAC, 40 VA Plug-In Transformer (Use w/ SK-DCPWR)
21.95
10.66
34.34
24.04
Cards / Key Tags For RK-WM, RK-WS & RK-WL
RKCM02
C
RKCM-02-1000+
C
RKCM-02-PK25
RKCMH02
C
SK-IDL-100
C
RKCI02
C
RKCI-02-1000+
C
RKCIH02
C
RKKT02
C
RKKT-02-PK25
RKKT-02-1000+
C
RKKTH02
C
Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code, Card ID Number range
Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces, unless buying a prepackaged set. Prepackaged card/tag sets do not allow choice of facility code or card ID numbers. All Cards must be ordered in increments of 25 (i.e.: 50, 75, 100, etc)
(For custom graphics a minimum of 250 cards is required, see page 8 for further details). Molded “Clamshell” Cards, Sequentially Numbered w/ Facility Code Lot card orders of 1000 or more. One facility code and sequential numbers, with no gaps. Pack of 25 molded cards, 26-bit, pre-encoded facility code and sequential numbers
Same as RKCM-02, encoded with HID Format 1 Pack of 100 - 20 mil PVC Field Printable Adhesive Labels (Dye-sub printable, use with RKCM01, RKCM02)
ISO Cards, Field Printable, Sequentially Numbered w/ Facility Code
LOT card orders of 1000 or more, one facility code, sequentially numbered with no gaps
Options: Slot (Portrait/Landscape), Photo Flap, Mag Stripe (1/2”, 2750 Oerstad), Custom Artwork
Signature Panel (Requires SK-SIGSETUP), Barcode (requires complete technical specification)
Same as RKCI-02, encoded with HID Format 1
Key Tags, Black Plastic, Sequentially Numbered w/ Facility Code Pack of 25 key tags, 26-bit, pre-encoded facility code and sequential numbers
LOT key tag orders of 1000 or more, one facility code, sequentially numbered with no gaps
Same as RKKT-02, encoded with HID Format 1
1
RKCM, RKCI AND RKKT credentials are all available in HID formats:
SK Format No. HID® Format No. Description
Format 701 H10301 SIA Standard 26-bit Wiegand
Format 702 N10002 Honeywell/Northern 34-bit Wiegand
Format 703 H10304 HID® 37-bit Wiegand with Facility Code *
Format 704 H10302 HID® 37-bit Wiegand, no Facility Code *
* HID 37-bit format is not compatible with Secura Key systems
SK-KPM
SK-KPS
Piezo Keypad, Mullion, 26-bit Wiegand Output
Piezo Keypad, Switchplate, 26-bit Wiegand Output
RK-65K
RK-65KS
RK65KS-KIT1
Proximity, 65,000 User Access Control Unit, Mullion Size Reader, Black Proximity, 65,000 User Access Control Unit, Switchplate Reader, Beige Kit Includes RK65KS switchplate reader, beige
RK-HHP hand-held programmer, RK-PS 12 VDC power supply and 10 RKKT02 keytags
2.94
2.49
73.50
2.94
114.47
4.69
3.98
4.69
5.08
127.00
4.32
5.08
Piezo Keypads - Use with SK-ACPE or SK-MRCP with SK-WIO-1
STAND ALONE PROXIMITY ACCESS CONTROL PRODUCTS
410.07
410.07
125 kHz Proximity Technology- Standard Wiegand Output
214.66
241.29
391.47
Dual Technology Standalone Proximity Readers
RKDT-SA-S
Access Control Unit reads Radio Key® 26/32-bit or HID® 26-bit proximity cards/tags, Black switch plate size RKDT-SA-M
Access Control Unit reads Radio Key® 26/32-bit or HID® 26-bit proximity cards/tags, Black mullion size
Accessories For RK-65K/ RKDT-SA
226.19
222.38
RK-HHP
DTK-CR
RK-PS
SK-SR1
97.74
120.77
39.09
86.66
Hand-Held Programmer Surge Suppressor, Card Reader or Keypad 12VDC 500 mA Plug-in Power Supply
SecuRelay™ Intelligent Relay Module for Exterior Applications
Minimum order is $50.00. Minimum card/tag order is 50 pieces, unless buying a prepackaged set.
Additional cards must be ordered in increments of 25 pieces (50,75,100, etc.)
Prepackaged card/tag sets do not allow choice of facility code or card ID numbers.
FED-EX PICK UP CHARGE: $12.00 - DROP SHIP CHARGE: $7.00 - ALL SHIPMENTS ARE F.O.B. FACTORY
C = CUSTOM ORDER. CALL FOR DETAILS. ALL OTHER PRODUCTS ARE IN STOCK.
5
PRODUCT GUIDE
2015 - LIST PRICING
Cards / Key Tags For RK-65K / RKDT-SA
RKCM02
RKCM-02-1000+
RKCM-02-PK25
SK-IDL-100
RKCI02
RKKT02
RKKT-02-1000+
RKKT-02-PK25
C
C
C
C
C
C
Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code, Card ID Number range
Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces, unless buying a prepackaged set. Prepackaged card/tag sets do not allow choice of facility code or card ID numbers. All Cards must be ordered in increments of 25 (i.e.: 50, 75, 100, etc)
(For custom graphics a minimum of 250 cards is required, see page 8 for further details). Proximity Molded Card, Sequentially Numbered w/ Fac.Code
LOT card orders of 1000 or more, one facility code, sequentially numbered with no gaps Pack of 25 molded cards, 26-bit, pre-encoded facility code and sequential numbers
Pack of 100 - 20 mil PVC Field Printable Adhesive Labels (Dye-sub printable, use with RKCM-01, RKCM02)
ISO Cards, Field Printable, Sequentially Numbered w/ Facility Code
Options: Slot (Portrait/Landscape), Photo Flap, Magstripe (1/2”, 2750 Oerstad), Custom Artwork,
Signature Panel (Requires SK-SIGSETUP), Barcode (requires complete technical specification)
Proximity Key Tag, Sequentially Numbered w/ Fac.Code
LOT key tag orders of 1000 or more, one facility code, sequentially numbered with no gaps
Pack of 25 key tags, 26-bit, pre-encoded facility code and sequential numbers
2.94
2.49
73.50
114.47
4.69
5.08
4.32
127.00
RK600 / RK600E STANDALONE WITH AUDIT TRAIL
RK-600
Proximity, 600 Users, Access Control Unit with Keypad, Beige
RK600e
Proximity, 600 User, Access Control Unit (without Keypad), Beige
RK-600T
RK-600 with 10 Key Tags, Beige
Accessories For RK600/RK600e
297.32
274.02
374.98
RKAR
RKAT
RK-HHP
SK-USB
RK-GM
RK-BB
ST-2
RK-PS
DTK-CR
164.14
135.46
97.74
137.36
10.66
21.95
13.56
39.09
120.77
Auxiliary Reader for Connection to RK600 & RK600e
Audit Trail & Computer Programming Upgrade for RK600 & RK600e
Hand-Held Programmer for RK600e
USB-to-Serial Converter For Computers Without a COM Port
Glass-Mount Kit for Installing RK600 on Inside of Window
Back Box / Spacer for RK600 & RK600e
Security Tool for Tamper-Resistant Screw
12VDC 500 mA Plug-in Power Supply
Surge Suppressor, Card Reader or Keypad Cards / Keytags For RK600, RK600e
RKCM-01
RKCM-01-25
RKCM-01-50
SK-IDL-100
RKCI01
RKKT-01
RKKT-01-25
RKKT-01-50
Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code, Card ID Number range
Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces, unless buying a prepackaged set. Prepackaged card/tag sets do not allow choice of facility code or card ID numbers. All Cards must be ordered in increments of 25 (i.e.: 50, 75, 100, etc)
(For custom graphics a minimum of 250 cards is required, see page 8 for further details). Proximity Molded Card, Random Numbering
Proximity Molded Card, Random Numbering, Bag of 25
Proximity Molded Card, Random Numbering, Bag of 50
Pack of 100 - 20 mil PVC Field Printable Adhesive Labels (Dye-sub printable, use with RKCM01, RKCM02)
Proximity ISO Card, Random Numbering
Options: Slot (Portrait/Landscape), Photo Flap, Magstripe (1/2”, 2750 Oerstad), Custom Artwork,
Signature Panel (Requires SK-SIGSETUP), Barcode (requires complete technical specification) Proximity Key Tag, Random Numbering
Proximity Key Tag, Random Numbering, Bag of 25
Proximity Key Tag, Random Numbering, Bag of 50
STAND ALONE TOUCHCARD™ PRODUCTS
2.94
73.50
147.00
114.47
4.69
5.08
127.00
254.00
26SASM
Accessories For 26SA
Touchcard™, Single-door, Standalone Access Control Unit, 65,500 User, Surface Lexan Housing
838.10
PD-26
SK-DCPWR
SK-XFRMR
SK-24VDC
PMA
FMA
SK-SR1
TS
ST-1
DTK-CR
Program Card Deck (Specify Facility Code)
12 VDC Power Supply Board (Use with SK-XFRMR)
Plug-In 16.5 VAC Transformer (Use alone or with SK-DCPWR)
24VDC Plug-In Power Supply, 1 Amp Post-Mount Adapter Plate
Flange-Mount Adapter Plate
SecuRelay™ Intelligent Relay Module (Prevents intrusion by external tampering).
Tamper Switch
Security Tool for Tamper-Resistant Screws
Surge Suppressor, Card Reader or Keypad 94.90
34.34
24.04
24.98
166.47
101.90
86.66
15.62
81.35
120.77
6
C
Minimum order is $50.00. Minimum card/tag order is 50 pieces, unless buying a prepackaged set.
Additional cards must be ordered in increments of 25 pieces (50,75,100, etc.)
Prepackaged card/tag sets do not allow choice of facility code or card ID numbers.
FED-EX PICK UP CHARGE: $12.00 - DROP SHIP CHARGE: $7.00 - ALL SHIPMENTS ARE F.O.B. FACTORY
C = CUSTOM ORDER. CALL FOR DETAILS. ALL OTHER PRODUCTS ARE IN STOCK.
PRODUCT GUIDE
2015 - LIST PRICING
Cards / Key Tags For 26SA
SKC-06
SKC-06-1000+
SKK-06-6
SKK-06-6-1000+
PDC50
PDC100
PDC200
PDC250
PDC300
PDC500
PDC1000
C
C
C
C
C
C
C
C
Specify Personalization when ordering: Facility Code, Card ID Number range
Important: Custom Printed and Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces. All Cards must be ordered in increments of 25 (i.e.: 50, 75, 100, etc)
(For custom graphics a minimum of 250 cards is required, see page 8 for further details). Barium Ferrite Card, Sequential Numbering w/ Fac.Code
LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps
Options: Slot (Portrait), Photo flap, Magstripe (1/2”, 2750 Oerstad), Custom Artwork,
Signature Panel (Requires SK-SIGSETUP), Barcode (requires complete technical specification)
Barium Ferrite Key Tag, Sequential Numbering w/ Fac.Code with Eyelet
LOT key tag order of 1000 or more, one facility code, sequntially numbered with no gaps
Program Deck with 50 Matching SKC-06 Cards - Sequentially Numbered 1-50
Program Deck with 100 Matching SKC-06 Cards - Sequentially Numbered 1-100
Program Deck with 200 Matching SKC-06 Cards - Sequentially Numbered 1-200
Program Deck with 250 Matching SKC-06 Cards - Sequentially Numbered 1-250
Program Deck with 300 Matching SKC-06 Cards - Sequentially Numbered 1-300
Program Deck with 500 Matching SKC-06 Cards - Sequentially Numbered 1-500
Program Deck with 1000 Matching SKC-06 Cards - Sequentially Numbered 1-1000
5.14
3.59
6.33
4.54
367.11
639.35
1,183.80
1,456.03
1,728.27
2,817.18
3,896.29
STAND ALONE AND MULTI-DOOR TOUCHCARD™ ACCESS CONTROL PRODUCTS
28SASMP
Touchcard™, Single-door, Standalone Access Control Unit, 65,000 User, Networkable, Surface Housing
NOTE: SK-NC485, RS485 Network Cable INCLUDED with all 28SA-Plus Readers
Accessories For 28SA-PLUS
SK-NM485
PD-26
SK-DCPWR
SK-XFRMR
SK-24VDC
PMA
FMA
TS
ST-1
SKQUICKCONN
SK-PLUG9
SK-USB
NETCONVP
NETCONV
SKMDM
SK-LAN
SK-029WSM34
DTK-CR
C
Network Module with RS485 transceiver
(One Per Reader Required When Networking legacy 28SA-PLUS with serial numbers 5xx-xxxx)
Program Card Deck (Specify Facility Code)
12VDC 1.2 A Power Supply Board (Use with SK-XFRMR)
16.5 VAC, 40 VA Plug-In Transformer (Use alone or with SK-DCPWR)
24VDC Plug-In Power Supply, 1 Amp Post-Mount Adapter Plate
Flange-Mount Adapter Plate
Tamper Switch
Security Tool for Tamper-Resistant Screws
DB9 to RJ11 6’ cable - Laptop to SK-ACP or 28SA+ DB9 Pigtail Computer Connector
USB-to-Serial Converter For Computers Without a COM Port
RS-485 Converter w/Power Supply (Required When Computer Is >100’ Away From SK-ACP or 28SA+)
RS-485 Converter w/Out Power Supply
56K Baud External Modem w/ Power Supply (Requires SK-NET-MLD software)
TCP/IP External Device Server w/ Power Supply (More than one TCP/IP connection requires SK-NET-MLD software)
Exit Reader For 28SA-PLUS, Surface Housing
Surge Suppressor, Card Reader or Keypad 1,154.30
60.43
94.90
34.34
24.04
24.98
166.47
101.90
15.62
81.35
28.29
36.61
137.36
333.68
304.50
467.37
521.37
574.55
120.77
Cards / Key Tags For 28SA
SKC-06
SKC-06-1000+
SKK-06-6
SKK-06-6-1000+
PDC50
PDC100
PDC200
PDC250
PDC300
PDC500
PDC1000
C
C
C
C
C
C
C
C
C
Specify Personalization when ordering: Facility Code, Card ID Number range
Important: Custom Printed and Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces. All Cards must be ordered in increments of 25 (i.e.: 50, 75, 100, etc)
(For custom graphics a minimum of 250 cards is required, see page 8 for further details). Barium Ferrite Card, Sequential Numbering w/ Fac.Code
LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps
Options: Slot (Portrait), Photo flap, Magstripe (1/2”, 2750 Oerstad), Custom Artwork
Signature Panel (Requires SK-SIGSETUP), Barcode (requires complete technical specification)
Barium Ferrite Key Tag, Sequential Numbering w/ Fac.Code with Eyelet
LOT key tag order of 1000 or more, one facility code, sequentially numbered with no gaps with Eyelet
Program Deck with 50 Matching SKC-06 Cards - Sequentially Numbered 1-50
Program Deck with 100 Matching SKC-06 Cards - Sequentially Numbered 1-100
Program Deck with 200 Matching SKC-06 Cards - Sequentially Numbered 1-200
Program Deck with 250 Matching SKC-06 Cards - Sequentially Numbered 1-250
Program Deck with 300 Matching SKC-06 Cards - Sequentially Numbered 1-300
Program Deck with 500 Matching SKC-06 Cards - Sequentially Numbered 1-500
Program Deck with 1000 Matching SKC-06 Cards - Sequentially Numbered 1-1000
Minimum order is $50.00. Minimum card/tag order is 50 pieces, unless buying a prepackaged set.
Additional cards must be ordered in increments of 25 pieces (50,75,100, etc.)
Prepackaged card/tag sets do not allow choice of facility code or card ID numbers.
FED-EX PICK UP CHARGE: $12.00 - DROP SHIP CHARGE: $7.00 - ALL SHIPMENTS ARE F.O.B. FACTORY
C = CUSTOM ORDER. CALL FOR DETAILS. ALL OTHER PRODUCTS ARE IN STOCK.
5.14
3.59
6.33
4.54
367.11
639.35
1,183.80
1,456.03
1,728.27
2,817.18
3,896.29
7
PRODUCT GUIDE
2015 - LIST PRICING
SOFTWARE
SKNETDM
Basic SK-NET™ Software w/ Disk & Manual (allows single TCP/IP connection)
SKNETMLD
SK-NET™ w/ Multi-Location, Dial-Up and multiple TCP/IP Connections, For 1 User,
includes ID Badge Printing Capability
SK-NET-MLD-CS2
C SK-NET™ Multi-Location Client/Server License For 2 Users, includes ID Badge Printing Capability
SK-NET-MLD-CS5
C SK-NET™ Multi-Location Client/Server License For 5 Users, includes ID Badge Printing Capability
SK-NET-MLD-CS10
C SK-NET™ Multi-Location Client/Server License For 10 Users, includes ID Badge Printing Capability
SK-NET-MLD-CS15
C SK-NET™ Multi-Location Client/Server License For 15 Users, includes ID Badge Printing Capability
System Expansion for Existing SK-NET-MLD CS software- Note that ADS Version upgrade may be required – see page 2 for part numbers
82.22
433.50
1,004.34
1,812.86
3,273.16
4,655.60
SK-ADS-EXP1-2
SK-ADS-EXP2-5
SK-ADS-EXP2-10
SK-ADS-EXP2-15
SK-ADS-EXP5-10
SK-ADS-EXP5-15
SK-ADS-EXP10-15
C
C
C
C
C
C
C
Expand Existing SK-NET-MLD to 2 Users
Expand Existing SK-NET-MLD CS2 from 2 Users to 5 Users
Expand Existing SK-NET-MLD CS2 from 2 Users to 10 Users
Expand Existing SK-NET-MLD CS2 from 2 Users to 15 Users
Expand Existing SK-NET-MLD CS5 from 5 Users to 10 Users
Expand Existing SK-NET-MLD CS5 from 5 Users to 15 Users
Expand Existing SK-NET-MLD CS10 from 10 Users to 15 Users
609.63
951.84
2,538.24
4,124.64
1,586.40
2,946.17
1,586.40
GRAPHIC-SETUP
SK-SIGSETUP
SK-NUM
SK-CLIP
C
C
C
C
Important: Custom Printed and Custom Programmed cards are NOT RETURNABLE. Custom Printing- Minimum Order Quantity 250
Custom Artwork Setup - one-time setup charge, 1-4 color 2-sided printing included with cost of cards
GRAPHIC-SETUP is required for non-standard mag stripe configurations, and custom numbering locations
Setup Of Signature Panels, Per Order
Non-Sequential Numbering, Per Card
Strap Clips, Each
SKL-03P
SKP-03
SKC-03
SKC-03-1000+
C
C
C
Common Code Insert Reader - SKP-03 Program Cartridge Required
Program Cartridge for SKL-03P Reader (Specify Facility Code)
Cards For SKL-03P
Specify Personalization when ordering: Facility Code
Important: Custom Printed and Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces. For custom graphics a minimum of 250 cards is required, see page 8 for further details). All Cards must be ordered in increments of 25 (i.e.: 50, 75, 100, etc)
Standard Card
LOT card order of 1000 or more, one facility code
Important: Custom Printed and Custom Programmed cards are NOT RETURNABLE. Options: Slot (Portrait), Photo flap, Magstripe (1/2”, 2750 Oerstad), Custom Artwork,
Signature Panel (Requires SK-SIGSETUP), Barcode (requires complete technical specification)
302.74
64.30
SK-029WSM34
SK-029WSM69
SK-034WSM1
SK-034WSM2
SK-034WSM7
SK028WOGV-FMT19
SK-028WSM22
SK-028WSM30
SKC-08
SKC-08-1000+
SKC-04
SKC-04-1000+
C
C
C
C
C
C
C
Reads SKC-06 Cards, Use as Exit Reader For 28SA-PLUS, Surface Housing
Reads SKC-06 Cards, 26-Bit Wiegand Output, Surface Housing (Use with SK-ACPE-LE)
OEM Surface Mount Touchcard™ reader – reads SKC-04 FMT1 cards, outputs standard 26-bit Wiegand Data
OEM Surface Mount TouchCard™ reader – reads SKC-04 FMT2 cards, outputs “Sentex” 30-bit Wiegand Data
For Select Engineered Systems, Surface Housing
For Casi-Rusco Systems, Reads Casi-Rusco Barium Ferrite Cards
For Mosler Linx Systems, Surface Housing, Reads Casi-Rusco Barium Ferrite Cards
For Mosler Linx Systems, Surface Housing, Reads Casi-Rusco Barium Ferrite Cards
Cards For Modern Electronics Systems
Standard Cards For Modern
LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps
Options: Slot (Portrait), Photo flap, Magstripe (1/2”, 2750 Oerstad). Custom Artwork
Signature Panel (Requires SK-SIGSETUP), Barcode (requires complete technical specification)
Facility Code and Numbering is assigned by Secura Key and can not be requested.
Cards For Sentex/Chamberlain, Door King, and Select Engineered Systems
Must specify Format Number, OEM code, facility code and sequential numbering when ordering
LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps
Options: Slot (Portrait), Photo flap, Magstripe (1/2”, 2750 Oerstad), Custom Artwork
Signature Panel (Requires SK-SIGSETUP), Barcode (requires complete technical specification)
574.55
574.55
609.06
609.06
609.06
724.11
724.11
724.11
CUSTOM CARD OPTIONS FOR TOUCHCARD™ , RADIO KEY® AND e*TAG® PRODUCTS
260.00
170.85
1.20
0.63
COMMON CODE READERS
5.14
3.59
SPECIALTY READERS
8
C
C
Minimum order is $50.00. Minimum card/tag order is 50 pieces, unless buying a prepackaged set.
Additional cards must be ordered in increments of 25 pieces (50,75,100, etc.)
Prepackaged card/tag sets do not allow choice of facility code or card ID numbers.
FED-EX PICK UP CHARGE: $12.00 - DROP SHIP CHARGE: $7.00 - ALL SHIPMENTS ARE F.O.B. FACTORY
C = CUSTOM ORDER. CALL FOR DETAILS. ALL OTHER PRODUCTS ARE IN STOCK.
5.14
3.59
5.14
3.59
PRODUCT GUIDE
2015 - LIST PRICING
Photo I.D. Printers – use with SK-NET-MLD Badge Printing Feature
SK-IDPTR-1
SK-IDPTR-2
SK-IDPTR-3
SK-IDPTR-4
SK-IDPTR-5
SK-IDPTR-6
SK-IDPTR-7
SK-DF-1
SK-DF-2
SK-RXF-3
SK-DF-4
SK-DF-5
SK-DF-6
SK-CK1
SK-CK2
SK-CK3
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Ultra Magicard Pronto, single-sided hand-fed low volume printer (dye film not included)
Ultra Magicard Enduro+, single-sided, auto-feed, low volume printer (dye film not included)
Ultra Magicard Enduro+ Duo, two-sided, auto-feed, low volume printer (dye film not included)
Ultra Magicard Rio Pro, single-sided, auto-feed, high volume printer (dye film not included)
Ultra Magicard Rio Pro Duo, two-sided, auto-feed, high volume printer (dye film not included)
Ultra Magicard Prima4 Uno, single-sided, auto-feed, high volume retransfer printer (dye film not included)
Ultra Magicard Prima4 Duo, two-sided, auto-feed, high volume retransfer printer (dye film not included)
Prima 431 Dye/Retransfer film, 1000 images, complete set
Prima 433 Dye Film, order with Prima 436, 750 images, double sided
Prima 436, Retransfer film ,order with Prima 433 dye film, 1000 images
MA100 YMCKO, Dye film, Color, 100 images- for Rio Pro, Pronto, Enduro
MA250 YMCKOK Dye film, Color, 100 images (Black on back) for Rio ProDuo, EnduroDuo
MA300 YMCKO, Dye film, Color, 300 images for RioPro, Pronto, Enduro
Cleaning Kit, 5 T-cards, 1 pen for Pronto Printer
Cleaning Kit, 10 cards, 1 pen for Enduro and Rio Pro Printers
Prima 491 Prima 4 Cleaning Kit
1,942.03
2,981.25
3,500.86
6,115.63
6,858.05
7,785.46
9,517.48
846.29
793.88
225.97
80.28
193.27
163.54
22.29
51.74
154.63
Wiegand Cards (Sensor/HID Compatible for Wiegand Swipe Readers)*
WCCI-10-XXXXXXXX
WCCI-10-xxxxxxxx-1000+
WCCI-11-XXXXXXXX
WCCI-11-xxxxxxxx-1000+
WCCI-14-XXXXXXXX
WCCI-14-xxxxxxxx-1000+
WCCI-16-XXXXXXXX
WCCI-16-xxxxxxxx-1000+
WCCI-20-XXXXXXXX
WCCI-20-xxxxxxxx-1000+
C
C
C
C
C
C
C
C
C
C
6.72
6.04
6.34
5.70
7.92
7.12
14.44
12.99
11.50
10.35
30-mil Wiegand Card
LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps
37-mil Wiegand Card
LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps
47-Mil Wiegand Tuffcard
LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps
47-Mil Wiegand/Prox Card
LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps
37-mil Wiegand/HF Card - specify inlay (DESFire, Mifare, etc - iCLASS® not available)
LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps
Options include Magstripe, Slot. Refer to Wiegand Card Ordering Guide or Contact Factory for assistance
*NOTE: Secura Key does not offer “zero-gap” Wiegand card encoding; if gaps in number sequence occur due to production fallout, additional cards will be supplied to fulfill the quantity ordered. Minimum card/tag order is 100 pieces. Cards must be ordered in increments of 25 (i.e.: 100, 125, 150, etc)
2011130
2011374
3321876
7994995
7997200
7997278
8220448
8220449
SKNC485
Wire harness, 28SA-PLUS
Medeco lock and 2 keys for 26SA & 28SA-PLUS
Spiral-bound manual, SK-NET™
Connector from “Exit Reader” to 28SA-PLUS Cable from SK-MDM or SK-LAN to SK-ACP or 28SA-PLUS
WIRE HARNESS 26SA-10PIN (JACKETED)
Door, SK-ACPE-LE 10”X11” (Mates w/ #8220449)
Housing, SK-ACPE-LE (10”X11”) (Mates W/8220448)
RS-485 communications cable for 28SA-PLUS
29.23
38.25
10.93
10.39
16.39
8.47
10.82
26.78
2.19
COMMON REPAIR PARTS
Minimum order is $50.00. Minimum card/tag order is 50 pieces, unless buying a prepackaged set.
Additional cards must be ordered in increments of 25 pieces (50,75,100, etc.)
Prepackaged card/tag sets do not allow choice of facility code or card ID numbers.
FED-EX PICK UP CHARGE: $12.00 - DROP SHIP CHARGE: $7.00 - ALL SHIPMENTS ARE F.O.B. FACTORY
C = CUSTOM ORDER. CALL FOR DETAILS. ALL OTHER PRODUCTS ARE IN STOCK.
9
LIST PRICES 2015
TERMS AND CONDITIONS
CONDITIONS AGREED BY BOTH PARTIES
A. Acceptance, Modification.
Acceptance by Buyer of delivery of the goods indicates acceptance by Seller and Buyer of the Warranty and Terms and Conditions
herein. Any additional or different terms proposed by Buyer shall be deemed objected to by Seller without need of further notice of
objection and shall be of no effect nor in any circumstances binding upon Seller. No provision of these Terms and Conditions shall
be deemed waived, amended or modified by either party unless such waiver, amendment or modification be in writing signed by
a duly authorized signatory of the party against whom it is sought to enforce the waiver, amendment or modification.
B. Cancellation.
This sale cannot be canceled except upon terms that will compensate Seller against loss and not unless written approval of said
cancellation has been obtained from Seller.
C. Claims.
(1) Buyer is deemed to have accepted the Products unless written notice of rejection is given within a reasonable time, which
is agreed to be within three (3) business days after receipt. Failure to make such claim within the stated period shall
constitute irrevocable acceptance and an admission that the goods fully comply with terms, conditions and specifications.
(2) Claims of late delivery are barred unless made prior to receipt of Products and the receipt of any Products shall constitute
a waiver of any claim that they were received late.
(3) No return of Products will be accepted by Seller without a Return Material Authorization number (RMA#), which will be
issued at Seller’s sole discretion. Returned Products should be in original shipping cartons and be complete with all
packing materials. A complete description regarding the nature of the returned goods must be included with all returned
Products.
(4) Custom programmed or custom printed cards or tags are not returnable. Stock items returned for credit must be
pre-approved by Seller and must be assigned a return material authorization number. These Products must be in their
original packaging.
D. Delivery and Title.
Subject to Seller’s right of stoppage in transit, delivery of the Products to a carrier shall constitute delivery to Buyer, and risk of
loss shall thereupon pass to Buyer, however title shall remain with Seller until Buyer makes payment in full under the contract.
Products invoiced and held by Seller for any reason shall be at Buyer’s risk and expense. Delivery route shall be at the discretion
of Seller unless specifically designated by Buyer.
E. Price Fluctuations and Product Specifications.
Prices quoted are in effect for thirty (30) days from date of quotation after which time they are subject to labor and/or material cost
fluctuations. Prices and product specifications are subject to change without notice.
F. Governing Law.
This sale shall be governed by the laws of the State of California.
G. Taxes/Freight.
Unless otherwise agreed in writing, the amount of all transportation charges from Seller’s location and all taxes or other charges
now or hereafter imposed by any governmental authority upon the sale, purchase, resale, delivery, manufacture, production or
possession of the Products specified herein, which may be paid by Seller or for which Seller is liable, shall be paid to Seller by
Buyer in addition to the purchase price of the Products.
H. Payment of Invoices.
When Secura Key grants an open account, payment is due within the terms set for the account. If payment is not received within
that term, a finance charge of 1.5% per month will be assessed on the unpaid delinquent balance. In the event payment is not
made in a timely manner and additional orders are received or are in process, Secura Key may place the account on hold pending
receipt of all amounts due.
I. Advice.
If technical advice is offered or given in connection with the use of any Products it will be given as an accommodation to Buyer
and without charge and Seller shall have no responsibilities or liabilities whatsoever for the content or use of such advice.
J. Installation/Training.
Buyer acknowledges that no installation, training or contracted education is contracted for or purchased under the terms of this
contract unless specifically agreed in writing. In the event that Buyer receives any training from Seller with respect to the Products,
then, in that event, such training is personal to the person receiving such training, and Buyer acknowledges that any person
receiving such training may not be capable of operating the Products.
K. General.
(1) This contract contains the entire agreement between the parties and supercedes any prior or contemporaneous oral or
written agreements or communications between them relating to the subject matter hereof.
(2) This contract may not be assigned, modified or cancelled without Seller’s prior written consent, and any attempt to
assign, modify or cancel it without such consent shall be absolutely void
(3) No delay or omission to exercise any right, power or remedy accruing to Seller upon breach or default by Buyer under
this contract shall impair any such right, power or remedy of Seller, or shall be construed as a waiver of any such breach
or default. All waivers must be in writing.
(4) In the event any of the provisions hereof shall, for any reason, be held void or unenforceable, the remaining provisions
shall remain in full force and effect and shall control.
(5) Any provisions of this contract prohibited by the law of any state shall, as to said state, be ineffective to the extent of
such prohibition without invalidating the remaining provisions of this contract.
(6) It is agreed that in the event of a dispute between the parties, for any reason connected with the purchase of the items
mentioned in this contract, or in any way related thereto, the parties agree to submit the controversy for decision to the
American Arbitration Association to the office located in Los Angeles County, CA.
LIST PRICES
2015
MODEL #
26SASM
PRICE
MODEL #
G
838.10
28SASMP
1,154.30
GRAPHIC-SETUP
DTK-XR
260.00
N
D
DTK-CR
PRICE
MODEL #
PRICE
RKDT-WS
198.66
RKDT-SA-M
222.38
RKDT-SA-S
226.19
120.77
NETCONV
304.50
RKDT-SR-M
333.34
162.20
NETCONVP
333.68
RKDT-SR-S
371.43
E
P
RK-GM
10.66
94.90
RK-HHP
97.74
eACCESS1
1,195.42
PD-26
eACCESS2
1,263.90
PDC50
367.11
RKKT-01
eACCESS3
1,026.95
PDC100
639.35
RKKT-01-25
127.O0
eACCESS4
1,081.83
PDC200
1,183.80
RKKT-01-50
254.00
eACCESS5
1,090.61
PDC250
1,456.03
RKKT02
eACCESS6
1,170.11
PDC300
1,728.27
RKKTH02
ET4-WXM
168.03
PDC500
2,817.18
RKKT-02-PK25
ET4-WXS
190.64
PDC1000
3,896.29
RKKT-02-1000+
ET8-RO-W-D-W
122.79
PMA
ET8-RO-W-D-I
122.79
ET8-RO-W-M
128.27
RK-BB
21.95
ET8-SR-X-M
333.34
RK-600
ET8-SR-X-D-I
371.43
ET8-SR-X-D-W
ET9-RO-W-MR
635.48
RKWM
159.95
297.32
RKWS
181.49
RK600E
274.02
RS-232E
371.43
RK-600T
374.98
156.21
R
19.62
S
RK-65K
214.66
SK028WOGV-FMT19
724.11
2.44
RK-65KS
241.29
SK-028WSM22
724.11
4.63
RK65KS-KIT1
391.47
SK-028WSM30
724.11
115.75
RKAR
164.14
SK-029WSM34
574.55
3.93
RKAT
135.46
Options for ETCI04 Cards:
SLOT, PORTRAIT/
LANDSCAPE
0.24
PHOTO FLAP
1.55
MAG STRIPE
0.48
BARCODE
0.33
SIGNATURE PANEL
SK-029WSM69
574.55
RKCI01
4.69
SK-034WSM1
609.06
RKCI02
4.69
SK-034WSM2
609.06
RKCIH02
4.69
SK-034WSM7
609.06
RKCI-02-1000+
3.98
SK-24VDC
Options for RKCI01/02 Cards:
0.24
SLOT, PORTRAIT/
LANDSCAPE
ETKT03
5.08
PHOTO FLAP
1.55
ETKT03-1000+
4.32
MAG STRIPE, HICO/LOCO
0.48
BARCODE
0.33
SIGNATURE PANEL
0.24
Options for ETKT03 Keytags
EYELET
0.63
BARCODE
0.33
RKCM-01
0.24
2.94
5.00
RKCM-01-25
73.50
125.00
RKCM-01-50
147.00
ETST03
ETST03-1000+
4.25
Options for ETST03 Keytags
0.33
F
FMA
4.32
RKWL
ETCI04-1000+
BARCODE
5.08
127.00
39.09
ETCI04
ETST03-PK25
5.08
RK-PS
ETAT03
ETCI04-PK25
166.47
5.08
101.90
RKCM02
2.94
RKCMH02
2.94
RKCM-02-PK25
73.50
RKCM-02-1000+
2.49
RKDT-WM
175.09
24.98
SK-ACP-CON
30.31
SK-ACPE-LE
951.72
SK-ACPE-NE
887.26
SK-ACPE-PCBA
854.40
SK-ACP-PS
75.55
SK-ACP-ENC
101.05
SK-ADS-VUP9-11/2
702.55
SK-ADS-VUP9-11/5
747.87
SK-ADS-VUP9-11/10
1,382.43
SK-ADS-VUP9-11/15
2,084.98
SK-ADS-VUP10-11/2
351.28
SK-ADS-VUP10-11/5
373.94
SK-ADS-VUP10-11/10
691.22
SK-ADS-VUP10-11/15
1,042.50
Minimum order is $50.00. Minimum card/tag order is 50 pieces, unless buying a prepackaged set.
Additional cards must be ordered in increments of 25 pieces (50,75,100, etc.)
Prepackaged card/tag sets do not allow choice of facility code or card ID numbers.
FED-EX PICK UP CHARGE: $12.00 - DROP SHIP CHARGE: $7.00 - ALL SHIPMENTS ARE F.O.B. FACTORY
P-1
LIST PRICES
2015
MODEL
MODEL ##
PRICE
PRICE
MODEL
MODEL ##
PRICE
PRICE
MODEL
MODEL ##
PRICE
PRICE
W
SK-ADS-EXP1-2
609.63
SK-KPS
410.07
SK-ADS-EXP2-5
951.84
SKL-03P
302.74
WCCI-10-xxxxxxxx
6.72
SK-ADS-EXP2-10
2,538.24
SK-LAN
521.37
WCCI-10-xxxxxxxx-1000+
6.04
SK-ADS-EXP2-15
4,124.64
SK-LAN-MOD
270.57
WCCI-11-xxxxxxxx
6.34
SK-ADS-EXP5-10
1,586.40
SKLOCK
13.74
WCCI-11-xxxxxxxx-1000+
5.70
SK-ADS-EXP5-15
2,946.17
SKMDM
467.37
WCCI-14-xxxxxxxx
7.92
7.12
1,586.40
SK-MRCP-LE
1,514.28
WCCI-14-xxxxxxxx-1000+
SK-BAT
34.34
SK-MRCP-NE
1,439.27
WCCI-16-xxxxxxxx
14.44
SKC-03
5.14
SK-MRCP-PCBA
1,407.36
WCCI-16-xxxxxxxx-1000+
12.99
SKC-03-1000+
3.59
SK-MRCP-4RKDT-M
2,466.67
WCCI-20-xxxxxxxx
11.50
SKC-04
5.14
SK-MRCP-4RKDT-S
2,619.05
WCCI-20-xxxxxxxx-1000+
10.35
SKC-04-1000+
3.59
SK-MRCP-4ET8SR-M
2,466.67
MAG STRIPE
0.49
SKC-06
5.14
SK-MRCP-4ET8SR-S
2,619.05
SLOT, LANDSCAPE
0.25
SKC-06-1000+
3.59
SKNETDM
82.22
SKC-08
5.14
SKNETMLD
433.50
SKC-08-1000+
3.59
SK-NET-MLD-UPGRADE
SK-ADS-EXP10-15
Options for SKC-03, -06 Cards:
186.38
SK-NET-MLD-CS2
1,004.34
SLOT, PORTRAIT
0.27
SK-NET-MLD-CS5
1,812.86
PHOTO FLAP
1.71
SK-NET-MLD-CS10
3,273.16
MAG STRIPE
0.52
SK-NET-MLD-CS15
4,655.60
BARCODE
0.37
SK-NM485
SIGNATURE PANEL
0.28
SK-NUM
1.20
SK-CK1
22.29
SKP-03
64.30
SK-CK2
51.74
SK-PLUG9
36.61
SK-CK3
154.63
SKQUICKCONN
28.29
SK-CLIP
0.63
SK-DCPWR
34.34
SK-IDL-100
114.47
60.43
SK-SIGSETUP
SK-SR1
86.66
SK-TS-CP
20.21
1,942.03
SK-USB
137.36
SK-IDPTR-2
2,981.25
SK-WIO-1
238.13
SK-IDPTR-3
3,500.86
SK-WLS-MOD
572.37
SK-IDPTR-4
6,115.63
SK-WLSE-MOD
309.00
SK-IDPTR-5
6,858.05
SK-XFRMR
24.04
SK-IDPTR-6
7,785.46
ST-1
81.35
SK-IDPTR-7
9,517.48
ST-2
13.56
SK-DF-1
846.29
SYSKIT-1
1,287.48
SK-DF-2
793.88
SYSKIT-2
1,325.67
SK-RXF-3
225.97
SYSKIT-3
1,052.85
SK-DF-4
80.28
SYSKIT-4
1,107.62
SK-DF-5
193.27
SYSKIT-5
1,111.83
SK-DF-6
163.54
SYSKIT-6
1,216.72
6.33
SKK-06-6-1000+
4.54
SK-KPM
P-2
410.07
29.23
2011374-Medeco lock & keys
38.25
3321876-SK-NET manual
10.93
7994995-Connector to 28SAP
10.39
7997200Cable SK-MDM to SK-LAN
16.39
7997278-Wire Harness-26SA
10.82
8220449-SK-ACP/E Housing
26.78
SKNC485RS-485 Cable - 28SAP
T
TS
15.62
SK-TS
20.21
8.47
8220448-SK-ACP/E Door
170.85
SK-IDPTR-1
SKK-06-6
Parts
2011130Wire Harness-28SAP
Minimum order is $50.00. Minimum card/tag order is 50 pieces, unless buying a prepackaged set.
Additional cards must be ordered in increments of 25 pieces (50,75,100, etc.)
Prepackaged card/tag sets do not allow choice of facility code or card ID numbers.
FED-EX PICK UP CHARGE: $12.00 - DROP SHIP CHARGE: $7.00 - ALL SHIPMENTS ARE F.O.B. FACTORY
2.19
TERMS AND CONDITIONS
LIMITED WARRANTY
Introduction
This Return and Warranty Policy Statement applies to Secura Key manufactured equipment purchased directly from Secura Key. For other
manufacturer’s products supplied by Secura Key, refer to those manufacturers’ Warranty Policy for details. If you have acquired Secura Key
equipment through a distributor, contact them to return the equipment to the place of purchase. The terms of Secura Key’s Return and Warranty
Policy have changed significantly for 2015, so please read this document carefully. As all statements herein are subject to change, please
check our website at www.securakey.com for the latest policy. If you have questions about this policy, contact Secura Key Customer Service
(800) 891-0020. Effective date of this policy: January 1, 2015
Secura Key Limited Warranty (United States and Canada)
Secura Key products are warranted against defects in materials and assembly for three (3) years. In the event that any Secura Key
manufactured product fails to perform as intended during the warranty period, Secura Key will replace the defective product with a new or refurbished
product. This is subject to the equipment being installed in accordance with the instructions and used appropriately in suitable conditions. The
warranty period begins on the date of shipment from our factory, or if sold through a Distributor, on the date of sale (original receipt
or documentation is required). This warranty does not include your cost for taxes, duties, or installation expenses.
Warranty claims require a Return Material Authorization (RMA). Simply call our Technical Support Department at 877-850-3452 for help in evaluating
your problem. If no resolution is achieved over the phone, Tech Support will give you a "ticket number", then you can request an RMA Request form,
and then complete and submit the form to Secura Key to initiate the Warranty process. Refer to Secura Key’s website for a downloadable RMA form.
Return of E*TAG® AND RADIO KEY® READER AND ANY CARD defective products shall be at the discretion of Secura Key. Customer must retain
the defective product for a thirty (30) day period following the issuance of the RMA, during which time Secura Key reserves the right to request
return of the defective product. Products must be returned if requested, freight prepaid. If requested defective products are not returned within
30 days, the customer account is subject to full cost of the replacement unit. Return of Touchcard™ and Control Panel defective product is
always required, and must be done within 30 days or customer account is subject to full cost of the replacement unit.
Warranty Exclusions
• Products which have failed due to vandalism, willful damage, installation errors, inappropriate electrical loading, mis-use and “Acts of
God” such as lightning, fire, flood, hurricane, etc.
• Cards that have been modified by third parties after sale in a manner that affects performance of the card.
• Reader Modules, Code Strips, Tags or Inserts that are embedded into other products - these are covered by a separate warranty – check with factory.
• Products where the serial number has been defaced or removed.
• Products not manufactured by Secura Key are covered by their own original manufacturers’ warranty. These include but are not limited
to SK-KPM/S (Barantec), NETCONV (B&B Electronics), SK-LAN (Lantronix), SK-MDM (U.S. Robotics), SK-IDPTR-1-7 (Ultra Magicard),
SK-BAT (Union Battery), SK-USB (Belkin), DTK-XR/CR (Ditek). Please contact SECURA KEY Customer Service for warranty, repair or
replacement instructions.
• Software – all software is provided on an as-is basis without warranty, and it is non-returnable once the packaging is opened. Software
media (memory stick or CD-ROM) is warranted against defects for 90 days. Telephone Technical Support will be provided at no charge
during normal business hours, and software updates will be available at no charge at Secura Key’s sole discretion. Secura Key does
not grant any warranty with respect to any Software Program, and no warranties of any kind, whether written or oral, implied or statutory,
including warranties of merchantability or fitness for a particular purpose, shall apply.
Warranty Limitations
THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR
IMPLIED. SECURA KEY SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. The remedies provided herein are the buyers’ sole and exclusive remedies. In no event shall Secura Key be liable for damages in
excess of the purchase price of the product, for direct, indirect, special, incidental or consequential damages (including loss of profits) arising
out of the installation, use, or inability to use such product, or loss resulting from the operation or performance of any third party product or any
systems in which a Secura Key product is incorporated, whether based on contract, tort or any other legal theory.
Export Warranty (All countries except U.S and Canada)
“Secura Key products are warranted against defects in materials and workmanship for a period of three (3) years from the date of
purchase. Secura Key shall replace products which prove to be defective and are sent to Secura Key freight prepaid within the warranty period.
Return freight will be charged to customer. This warranty does not include freight, taxes, duties, or installation expenses. The foregoing warranty
shall not apply to defects resulting from abuse, misuse, accident, alteration, neglect, unauthorized repair or installation, and “Acts of God”, such
as lightning, fire, flood, hurricane, etc. Secura Key shall have the right of final determination as to the existence and cause of the defect. THE
WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR
IMPLIED. SECURA KEY SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. The remedies provided herein are the buyers’ sole and exclusive remedies. In no event shall Secura Key be liable for direct, indirect,
special, incidental or consequential damages (including loss of profits), whether based on contract, tort or any other legal theory.”
Warranty replacements
Subject to the terms of the limited warranty in effect at the time of purchase, Secura Key will replace a product that fails to operate as intended
within the product’s warranty period. Products will be replaced with new or reconditioned products at Secura Key’s sole discretion. For all warranty
replacements, Secura Key will ship replacement equipment via UPS Ground at no additional charge. If you request expedited return shipping, we
will charge for the shipping cost. In most cases, E*TAG® AND RADIO KEY® READER AND CARD defective products will be replaced as soon
as the RMA is acknowledged, subject to standard lead times. Return of the defective products may be required at Secura Key’s sole discretion
within 30 days of the RMA, so the customer must retain the defective product for 30 days.
TERMS AND CONDITIONS
LIMITED WARRANTY
Touchcard™ and Control Panel defective product must be returned to the factory within 30 days of the issuance of the RMA, or the customer
account will be charged the full cost of the replacement product.
If Secura Key agrees to replace a defective product under the terms of this warranty, no extension of the original warranty period will occur.
Non-warranty replacements have been discontinued as of July 2014.
Credit returns
At its sole discretion, Secura Key will issue the Customer a credit equal to the purchase price, minus a fifteen percent (15%) restocking charge,
for all Secura Key approved returns for Standard Products (excluding Software Products). Standard Products may only be returned for credit
within 90 days of the date of purchase from Secura Key. The Standard Product must be new and in complete original factory packaging with the
unbroken original seal. Credit will not be issued for damaged, shop worn or previously installed Standard Products, or for Standard Products
which have missing parts or which have defaced or damaged packaging. Freight to Secura Key’s facility will be at Customer’s expense. No
Custom Products (including, without limitation, custom cards, standard cards, tags, keys, or transponders that have been programmed, encoded
or marked to customer specifications, or custom-built readers with customer-specified hardware or firmware) can be returned to Secura Key for
credit for any reason other than for a warranted Product defect.
Procedures For Replacement or Return of SECURA KEY products
Before you can return any product to Secura Key and/or obtain a warranty replacement, you must request a return material authorization (RMA)
number. This applies to all product returns, including:
• Warranty repair/replacements
• Credit returns.
To obtain an RMA
1. Contact Secura Key Technical Support at 877-850-3452. Tech Support will help you to correct the problem or quickly confirm that the
product is defective. Tech Support will issue a Ticket Number (not the same as an RMA Number) which must be included on the RMA
form (This is not necessary for credit returns). If the product is defective, you will need to submit an RMA Request Form to receive an RMA
number. (Our RMA department will gladly assist you with this process – contact them at rma@securakey.com.)
You MUST have an account with Secura Key to obtain an RMA. If you purchased the product through a Dealer or Distributor, it must
be returned through the Dealer or Distributor.
2. Submit the RMA Request Form to Secura Key RMA Department. We can fax or email a copy of the blank form to you, or you may obtain a
downloadable form from the Secura Key website (click on Support, Sales & Service, RMA Policy).
To complete the RMA Request form you will need the following information:
• Ticket Number from Tech Support
• Original Invoice Number and/or Product Serial Number
• Model number or part number
• Reason the product is being returned
3. We will fax or e-mail the RMA acknowledgment form to you, which confirms your request and provides you with an RMA Number.
4. If you need to return product(s) to Secura Key under an RMA:
a) Repackage the product appropriately to cushion and protect the product from damage, and include a copy of the RMA acknowledgement
form. Print the RMA Number on the outside of the package. Packages received without the RMA number written on the outside
of the package may be refused and returned to you at your expense.
b) Send the product to Secura Key RMA Department, 20301 Nordhoff St., Chatsworth, CA 91311
c) All products must be returned freight prepaid within 30 days of obtaining an RMA. We will not accept unauthorized returns or
freight collect returns; we will return these to you at your expense.
If a returned product contains parts that are no longer available or repairable, we will contact you to discuss resolution and return of the material.
If the customer returns defective products to Secura Key and those products are replaced, credit is issued, or the products are determined to be
unrepairable, those products will become the property of Secura Key.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising