Delton | PC-80D | User manual | Delton PC-80D User manual

Delton PC-80D User manual
ECG Viewer Manager
User Manual
User manual for ECG Viewer Manager
Introductions to User
Dear Users,
Thank you very much for purchasing our Easy ECG Monitor series products. This manual is intended to assist the
user in uploading ECG Data from Easy ECG Monitor to PC in a safe and effective manner. Please read this
manual carefully before running the system, and follow it to operate.
The Manual is published in English and we have the ultimate right to explain the Manual. No part of this manual
may be photocopied or modified without the prior written consent. We reserve the right to improve and amend it
at any time without prior notice.
ECG Viewer Manager is application software running on a personal computer with Microsoft Windows operating
system, so the user should be acquainted with some knowledge to operate computer.
Version of the Manual: Ver1.1
All Rights Reserved.
The version of this user manual is applicable to the PC software “ECG Viewer Manage” with version V4.1 or
higher which can be used to connect the “Easy ECG Monitor” device with version V4.0-10-10 or higher..
3502-3430016
I
User manual for ECG Viewer Manager
Information for Operation
¾ Please
make sure the well connection of the data cable between PC and Easy ECG Monitor before uploading
data, do not pull out the data cable arbitrarily during the data upload.
¾ Data
transmission may be interrupted during uploading the data in case of low battery voltage for Easy ECG
monitor.
¾ Do
not do the key operation on Easy ECG Monitor during the data upload.
¾ While
installing printer driver on PC, please quit “ECG Viewer Manager” software firstly if it's running.
Notes:
¾ 1.
Connect/Disconnect the data cable to Easy ECG Monitor gently and carefully, do not bring or shake the data
cable plug with force to insert into or unplug from data interface port.
¾ 2.
Before updating the software “ECG Viewer Manager”, please uninstall the previous version if there is and
manually delete all the files in the default installation folder (“C: \ECG Viewer Manager\”) or your customized
installation folder.
For example: “ECG Viewer Manager” is installed under the file folder of “C:\ECG Viewer Manager”. At first,
uninstall the “ECG Viewer Manager” software from “Control Panel→Add/Uninstall Programs”, and then
manually delete the all files under the directory “C:\ECG Viewer Manager”. Next, install the new version of
“ECG Viewer Manager”.
II
User manual for ECG Viewer Manager
Table of Contents
1 Overview .......................................................................................................................................... 1 1.1 Features............................................................................................................................................................ 1 1.2 Operating Condition ........................................................................................................................................ 1 1.3 Procedure of Data Uploading .......................................................................................................................... 1 2 Installation, Connection and Settings ........................................................................................... 2 2.1 Installation of ECG Viewer Manager .............................................................................................................. 2 2.2 Display Setting for PC ..................................................................................................................................... 5 2.3 Device Connection .......................................................................................................................................... 6 2.4 Easy ECG Monitor Setting .............................................................................................................................. 6 3 Operations........................................................................................................................................ 6 3.1 Main Menu ...................................................................................................................................................... 6 3.2 User Archive Management .............................................................................................................................. 8 3.2.1 Create New User ....................................................................................................................................... 8 3.2.2 Modify the User Info ................................................................................................................................ 9 3.2.3 Find User .................................................................................................................................................. 9 3.2.4 Delete User ............................................................................................................................................. 10 3.3 Device Management ...................................................................................................................................... 10 3.3.1 Import Disk Data .................................................................................................................................... 10 3.3.2 Import Device Data................................................................................................................................. 13 3.3.3 Wireless Reception ................................................................................................................................. 13 3.3.4 Backup, Restore and Delete the ECG Records ....................................................................................... 14 3.4 Review ECG Waveform Records, All ECG Waveforms, Statistical Result and Irregular Rhythm Event Plot
............................................................................................................................................................................. 15 3.4.1 Review ECG Waveform Records ........................................................................................................... 16 3.4.2 Browse All ECG Waveforms for a Given Record .................................................................................. 17 3.4.3 Statistical Result ..................................................................................................................................... 18 4.4.4 Irregular Rhythm Event Plot ................................................................................................................... 18 3.5 Delete and Print ECG Waveform Records ..................................................................................................... 19 3.5.1 Delete the ECG Waveform Records ....................................................................................................... 19 3.5.2 Print the ECG Waveform Records and Statistical Analysis .................................................................... 19 3.6 About ............................................................................................................................................................. 22 3.7 Exit the System .............................................................................................................................................. 23 3.8 Troubleshooting ............................................................................................................................................. 23 III
User manual for ECG Viewer Manager
1 Overview
1.1 Features
The waveforms and data saved in Easy ECG Monitor which have been uploaded to PC through ECG data cable
can be archived and reviewed by ECG Viewer Manager. It is convenient for user to browse the stored data records,
review the ECG waveforms and back up the uploaded data.
1.2 Operating Condition
Computer Hardware Requirement:
PC with Intel Pentium Ⅲ CPU, 800MHz speed or higher; 256MB or higher memory; CD-ROM drive; at least
1GB space available in the hard disk to install “ECG Viewer Manager” software.
Requirement for Operating System:
Microsoft Windows XP, Windows 2000 or Windows Vista and Windows 7
1.3 Procedure of Data Uploading
1. Install “ECG Viewer Manager” software and “USB Driver”.
2. Set the resolution of screen display as “1024×768” pixel or higher.
3. Connecting the Easy ECG monitor to PC with the data cable provided. ( As shown in the figure 2-8);
4. Double-click the icon “
” on desktop to start running “ECG Viewer Manager” Software and click “
”
(button for user info) on the main menu screen to add a new user.
5. Click “
” (button for data import) on the main menu screen to preview the ECG records to be uploaded, select
the record needed to upload, click the “
” button to load the data into PC. After that the user can
do further review and analysis on those records dumped into PC.
Notes: The software “ECG Viewer Manager” described in this manual supports wireless transmission
function. More information about the operation refers to the following sections in detail.
1
User manual for ECG Viewer Manager
2 Installation, Connection and Settings
2.1 Installation of ECG Viewer Manager
Insert the CD-ROM which contains the installation software into CD-ROM drive, the software installation will be
automatically running or directly running the program "setup.exe" in the root directory of CD-ROM drive, then
the window of "ECG Viewer Manager Setup" will be prompted on the screen as shown in Figure 2-1A. Selecting
the installation equipment of PC-80 B/Prince 180 B (Wireless, V4.1) to enter into the installation screen, as shown
in Figure 2-1B.
Note:
The model name of PC-80A B/Prince 180A B (V2.4) is applied to the device with the software version V2.4 and
the model of PC-80A, PC-80B, Prince 180A and Prince 180B.
The model name of PC-80D/ Prince 180D (V3.5) is applied to the device with the software version V3.5 the
model of PC-80D and Prince 180D.
The model name of PC-80 B/Prince 180 B (Wireless, V4.1) is applied to the device with the software version
V4.1, the model of PC-80B and Prince 180B as well as the wireless transmission function.
Figure 2-1 ECG Viewer Manager Setup Screen
Figure 2-1B ECG Viewer Manager Setup Screen
2
User manual for ECG Viewer Manager
According to the prompts of installation of ECG Viewer Manager to operation, as shown in figure 2-2—figure
2-6;
Figure 2-2
Figure 2-3
3
User manual for ECG Viewer Manager
Figure 2-4
Figure 2-5
4
User manual for ECG Viewer Manager
Figure 2-6
Note: If “Complete” (default) installation is selected,the installed program files will be located in the disk path
“C: \Ecg Data Manager” If user doesn’t want to use default installation, please select "Custom" and click "Next"
to choose the root directory for locating the program files as shown in Figure 2-3.
2.2 Display Setting for PC
1. Setting Display Properties
On desktop screen of Windows operating system, click the right button of the mouse, it will bring up a quick
menu, then move the cursor to select "Properties". Choose "Settings" on the "Display Properties" window, then set
the "Screen resolution" option as "1024 by 768 pixels", and set the "Color quality" option as 16bit or higher, as
shown in Figure 2-7.
.
Figure 2-7 Display Properties Setup
5
User manual for ECG Viewer Manager
2.3 Device Connection
After “ECG Viewer Manager” software is installed, refer to Figure 2-11 to perform cable connection:
Figure 2-8
Note: connect the device at first time, the system prompts that “Found New Hardware Your new hardware is
installed and ready to use.” on the right side of task bar,as shown in Figure 2-12, it means that USB Driver is
installed successfully.
Figure 2-9
2.4 Easy ECG Monitor Setting
Please power on the Easy ECG Monitor before uploading data.
3 Operations
3.1 Main Menu
Double-click the icon “
” of “ECG Viewer Manager” on the desktop with the Mouse, then ECG Viewer
Manager will run automatically and the main menu screen pops up on the desktop, as shown in Figure 3-1.
6
User manual for ECG Viewer Manager
Figure 3-1 Main Menu Screen
Description of menu bar:
— Menu items
Menu name
pull-down menu
Function description
Import device data
Directly upload the data to PC from the device through
provided USB data cable.
Import disk data
ECG Device
User info
PC.
Wireless data
Upload or transmit the data to PC by wireless.
Exit
Exit the manager system
Create a new user
Create a new user archives
Delete user
For deleting the archives
Find user
For browsing the user archives
Delete ECG info
For deleting the ECG records
Print
Print the ECG records, statistical result and irregular rhythm
ECG record
event plot.
Print all ECG
Help
Copy data from the disk which contains the ECG records to
About
Print all ECG waveforms
Display the ECG view manager version, the disk space
information and so on.
7
User manual for ECG Viewer Manager
— Menu operations:
Select the functional buttons from the pull-down menu to enter the corresponding operation screen.
Description of tool bar:
— The Tool bar contains shortcuts for menu selection, the user can operate from the menu bar or shortcut keys for
quick operation. Click “Exit” to exit the manager system.
3.2 User Archive Management
On user archive management screen, the operations: adding new user ID, modifying, finding and deleting archive
can be performed. On the left of screen is the list of user name.
3.2.1 Create New User
Click the submenu “Create a new user” in the pull-down menu of the "User info" button, or click the Tool bar icon
“
”, and then the window appears on the desktop, as shown in the figure 3-2.
Figure 3-2 Create a new user
Screen Description:
— Name:User name; display or enter user name; length of name is less than 30 bytes or 15 characters.
— ID:Identification number; display or enter ID number; length of ID is less than 30 bytes.
— Sex:Choose Male/Female in submenu “▼”
— Age: display or enter user’s age. Please enter Arabic numerals.
— Blood type: Display or enter user’s blood type in the submenu “▼”, you can also enter manually.
— Telephone:Display or enter User’s telephone number.
— Height: User’s height; display or enter user’s height. Please enter Arabic numerals.
— Weight: User’s weight; display or enter user’s weight. Please enter Arabic numerals.
— Remark: Display or enter the contents of the note; the length of the contents is less than 160 bytes or
8
User manual for ECG Viewer Manager
80 characters.
3.2.2 Modify the User Info
After enter the information of the selected user, click the “Ok” button. The user name list is on the left side of
window, the detail of User Info and ECG Info is on the right side of window, as shown in figure 3-3, in this screen,
you can modify the user information, finally click the “update” buttons.
Note:ID and name cannot be modified.
Figure 3-3 User info
3.2.3 Find User
On main menu screen, click the submenu “find user” in the pull-down menu of the "User info" button, or click the
Tool bar icon “
”, then window appears on the desktop, as shown in the figure 3-4 .
Figure 3-4 Find User
9
User manual for ECG Viewer Manager
Figure 3-5 Found User
Screen Description:
— Field: “ID” and “Name” are optional: you can search user by ID or by name.
— String: Key word to be searched. Enter the ID and the full name or the first alphabet or character of the name
or the first ID number to search the user. If no key word is entered into the “String” field, all the user info will
be displayed after clicking “Find”.
— Result: Click the “find” after enter the Search criteria, if the user exists, it will prompt “Found the user” and
spring the information of the archive in the screen as shown in the figure 3-5. If the user does not exist, it will
prompt “the user information is not being found”.
3.2.4 Delete User
On the left of main menu screen is user name list, click the user information which you want to delete. On main
menu screen, click the submenu “Delete” in the pull-down menu of the “User info”, or click the Tool bar icon
“
”, then a window appears on the desktop, as shown in the figure 3-6.
Note: this operation will delete all records under this user and can not be recovered.
Figure 3-6 Delete User
3.3 Device Management
3.3.1 Import Disk Data
Method 1: Ensure correct connection between the device and PC via USB data cable, select the ECG record you
want to upload from the user name list, click the submenu “Import disk data” in the pull-down menu of the “ECG
device”, or click the Tool bar icon “
”, the system will add a disk named “ECG Viewer Manager” after it
performs automatic scanning as shown in Figure 3-7. Click the root directory “ECG Viewer Manager” and “OK”
10
User manual for ECG Viewer Manager
button, then a window appears on the desktop, as shown in the figure 3-8, figure 3-9, select the record you want to
read, click the “
” button to read the data on PC. After that you can review these data
records in the user name list.
Figure 3-7 Read
Figure 3-8 Read
Note: The scanning time of ECG information will be different depending on the data size and computer speed; it
would last for 6 minutes at most if the device contains large amounts of data. Please wait for a moment!
Figure 3-9 Read
11
User manual for ECG Viewer Manager
Method 2: After the device is connected to PC via USB data cable, the operating system of PC will add a
removable disk named “EASY ECG” after it performs automatic scanning as shown in Figure 3-10. Double click
this disk name, you will find there four file folders and one text file: ECG0, ECG1, ECG2, ECG3 and
README.TXT” which can be copied to PC directly. After uploading, the data memory can be cleared at device
side, meanwhile, the user can use software “ECG Data Manager” to review and analyze the imported data records
while the device isn’t connected to PC.
For example, copy these four file folders and the text file to a local file folder named “ September ECG” in disk D
with volume DATA, then click the submenu “Import disk data” in the pull-down menu of the “ECG device”, or
click the Tool bar icon “
” to import the data records as shown in Figure 3-11. Click the root directory
“ September ECG” and “OK” button, then a window appears on the desktop, as shown in the figure 3-8, figure
” button to read the data on PC. After that
3-9, select the record you want to read, click the “
you can review these data records in the user name list.
Figure 3-10
Figure 3-11
12
User manual for ECG Viewer Manager
3.3.2 Import Device Data
Ensure correct connection between the device and PC via USB data cable, select the ECG records you want to
upload from the user name list, click the submenu “Import device data” in the pull-down menu of the “ECG
device” or click the Tool bar icon “
”, then a window appears on the desktop, as shown in the figure 3-8, figure
” button to load the data into PC. After
3-9, select the records needed to upload, click the “
that the user can review the records in the user name list.
3.3.3 Wireless Reception
If the wireless transmission function is needed, plug the provided wireless adapter to PC firstly, then restart the
ECG monitor. The PC prompts that “Found New Hardware. Your new hardware is installed and ready to use” (as
shown in Figure 3-12) on the right lower corner, which indicates that the wireless device is found and being
connected to PC. The icon “
“
” reminds the user of a successful connection, and the gray icon “
” will change into “
” and “
” and
”.
Figure 3-12
3.3.3.1. Real-time wireless transmission
When the device is in continuous measurement mode, after click the icon “
” or “
”, the
screen of real-time wireless reception displays on the interface, meanwhile, it dynamically draws the real-time
ECG waveform (As shown in Figure 3-13).
Figure 3-13
13
User manual for ECG Viewer Manager
3.3.3.2 Non-real-time wireless uploading
When the ECG monitor is under “Review” → “Measurement result” status, press the “■ OK” button, the device
” or “
will display “Sending…….” Click the icon “
” on PC side, the non-real-time wireless
reception screen appears on the interface with a display of “user (sb) is receiving the wireless data” as shown in
Figure 3-14. The appearance of Figure 3-15 means the data record has been received and saved in PC successfully.
The user can review it later in the user name list.
NOTE: 1.After the device is switched off, the window “Receiving wireless data…”should be closed, or the next
operation of non-real-time wireless transmission cannot be performed.
2. If the Bluetooth driver is damaged or the simplified GOHOST Bluetooth driver is being used, it may result in
inoperable wireless reception.
Figure 3-14
Figure 3-15
3.3.4 Backup, Restore and Delete the ECG Records
Select the corresponding user ID in the user name list and click the “
” icon to review the ECG record
list, delete the selected record, backup the record to the data file and restore the data file as shown in Figure 3-16.
Select the “ECG Backup” path on the left corner, click the “
” to back up the selected
record to the corresponding path under the computer.
Click “
” to delete the selected record.
” to restore the selected record in the
Select data file in the backup file list, click the “
current list.
14
User manual for ECG Viewer Manager
Figure 3-16
3.4 Review ECG Waveform Records, All ECG Waveforms, Statistical Result and
Irregular Rhythm Event Plot
Select the ECG record you want to review in user name list on the left of main menu, and then you can not only
review this record in detail, but also enter some remarks and store them. On the left of main menu is user name list
and the detail of ECG record information. The information such as ECG waveform record, all ECG waveforms,
statistical result, irregular rhythm event plot zoom of QRS complex ect. is displayed on the right of the main
menu.
15
User manual for ECG Viewer Manager
3.4.1 Review ECG Waveform Records
Click the icon “
” to view the ECG waveform as shown in Figure 3-17
Waveform area
The new movable
window
The upside-down
The
triangle
triangle
Waveform zooming area
Figure 3-17 the ECG Waveform Screen
According to different measurement modes, there are two display modes for ECG waveform record: Quick
measurement by built-in electrodes and continuous measurement by lead wire. Corresponding specifications are
as follows:
① Select the waveform gain through the pull-down submenu “
” above the right corner of
waveform area.
② Click any point within the ECG waveform area, a dashed box will display on waveform area, and the zoomed
signal within this box will show on the waveform zooming area. Right click this dashed box, the waveform within
it can be fixedly displayed on a new movable window. The doctor or professionals can observe the detail of the
ECG waveform by moving two vertical lines.
Vertical (amplitude in mV): the vertical distance between the cross point of two vertical lines and the waveform;
Horizontal (time interval in ms): the horizontal distance of two vertical lines.
The heart rate value will be displayed for the records of continuous measurement;
HR: the average heart rate value of ECG waveform in waveform zooming area.
Irregular Rhythm List: the type of irregular rhythm of ECG waveform in waveform zooming area.
If the waveform on this dashed box is identified with any irregularity, Irregular Rhythm List will show the type of
irregularity. The segment of irregular ECG waveform will be displayed in striking red and marked by an
upside-down triangle above it. If you want to cancel this mark, click the button “Cancel”, then a dialog box pops
up on the screen and reminds you that “Are you sure to cancel the irregular rhythm mark?”, finally, click the
“OK” button to cancel this mark and corresponding event. After that a normal triangle will be shown beside the
upside-down triangle as shown in figure 3-17, and the statistical result and irregular rhythm event plot will skip
16
normal
User manual for ECG Viewer Manager
this event. If you want to re-mark the cancelled irregular rhythm event, click the “Cancel” button, then a dialog
box pops up on the screen and reminds you that “Are you sure to restore this irregular rhythm mark?”, finally,
click the “OK” button to remark this event. After that the normal triangle will disappear, and this irregular rhythm
event will be taken into account in the statistical result and irregular rhythm event plot again.
If the waveform is normal, only the heart rate value will be shown and the display area of Irregular Rhythm List is
blank.
③ Enter remarks on the remark area, click “update” to save.
④ On the lower left corner of the ECG info screen displays the record time, period, measurement mode, filter
mode and device type. (No HR calculation and measurement interpretation during real-time wireless ECG data
transmission)
⑤ Below the ECG waveform record screen, display the record time, average HR value, total pages and the current
” button can turn the page up and down. One page contains
page number. Click the “
30-second ECG waveform.
3.4.2 Browse All ECG Waveforms for a Given Record
Click the icon “
” to browse all signal waveforms for this ECG record as shown in figure 3-18.
Each page contains 15 segments of ECG waveform. If there are more than 15 segments for display, you can
review other segments on the next page by moving the slid “
” to turn the page up and
down. The number “1” on this bar indicates the first page, and the “2” is the number of total pages. Double click
any segment of ECG waveform on this screen to return to its corresponding ECG waveform screen for a particular
review.
Figure 3-18
All ECG Waveforms
17
User manual for ECG Viewer Manager
3.4.3 Statistical Result
The statistical result is for ECG records which are uploaded by the method of non-real-time wireless reception and
measured by mode of continuous measurement. Click the icon “
” to get the statistical result for
this ECG record as shown in Figure 3-19.
In the statistical result screen, you can not only browse the HR trend graph and the irregular rhythm event list, but
also read the maximal, minimal and average heart rate value which is displayed within the time in current trend
graph.
Move the blue line to browse the HR value measured in different time. The number “87” is the current HR value.
Right click the mouse at this time to shift the screen to the corresponding ECG waveform screen. Click the
pull-down button of “Scale” to select the time scale of horizontal coordinate, move the slide “
” to
turn the page up and down so as to view the HR trend graph.
The irregular rhythm event list displays all irregular rhythm events and whether the listed events occur or not.
Figure 3-19 Statistical Result
4.4.4 Irregular Rhythm Event Plot
Click the icon “
” to enter the irregular rhythm event plot screen where the distribution
and types of irregular rhythm event can be reviewed as shown in Figure 3-20.
Move the blue line to browse the irregular rhythm event occurring in different time, “Type No: 4” in the screen
indicates the irregular rhythm type “Suspected a little slow beat” which is displayed with yellow background in
the list. Right click any point in the event plot at this time, the screen will be shifted to ECG waveform screen
whose measuring time is corresponded with that the blue line pointed. Meanwhile, click the pull-down button of
“Scale” to select the time scale of horizontal coordinate, move the slide “
down so as to view the HR trend graph.
18
” to turn the page up and
User manual for ECG Viewer Manager
Figure 2-20 Irregular Rhythm Trend Graph Screen
3.5 Delete and Print ECG Waveform Records
3.5.1 Delete the ECG Waveform Records
Select the corresponding record, click the submenu “Delete” in the pull-down menu of the “ECG record” or click
the Tool bar icon “
”, then a window appears on the desktop, as shown in the Figure 3-21. Please follow the
prompts to operate.
Figure 3-21 Delete the Records
3.5.2 Print the ECG Waveform Records and Statistical Analysis
At first, select a record, then if you want to print the ECG waveform record, statistical result or irregular rhythm
event plot, the next step you should take is clicking the submenu “print record” in the pull-down menu of “ECG
record” or click the Tool bar icon “
”. But if your choice is to print the all ECG waveforms for this record, the
next step is clicking the submenu “Print all ECG” in the pull-down menu of “ECG record” or click the Tool bar
icon “
”, finally, their preview screen windows will appear on the desktop, as shown in the Figure 3-22, Figure
3-23, Figure 3-24 and Figure 3-25.
Operation Description:
“
”: Actual Size: Preview the report in actual size
19
User manual for ECG Viewer Manager
“
”: Full screen displays the records.
“
”: Print the current report displayed. If the content of records is more than one page, click this button to set
the start, end page and the printing copies according to your need.
“
“
”: Save. Click this button can save the ECG records in picture format on PC.
”: If the content of records is more than one page, click this button to turn the page up and down so as
to preview all records.
“
”: Close. Close the current preview.
Figure 3-22 Print Preview (ECG Waveform)
20
User manual for ECG Viewer Manager
Figure 3-23 Print Preview (ECG Statistical Result)
Figure 3-24 Print Preview (Irregular Rhythm Event Plot)
21
User manual for ECG Viewer Manager
Figure 3-25 Print Preview (All ECG Waveforms)
3.6 About
Click the submenu “About” in the pull-down menu of the “Help”, or t or click the Tool bar icon “ ”, and then the
dialog box about the system appears, as shown in the figure 3-26.
Figure 3-26 About System
22
User manual for ECG Viewer Manager
3.7 Exit the System
Click the submenu “Exit” in the pull-down menu of the “ECG device”, or click the Tool bar icon “
”, and then
the dialog box about the system appears, as shown in the figure 3-27.
Figure 3-27 Exit the System
3.8 Troubleshooting
No.
Misinformation
1
Failing to search the device!
2
No searched ECG information!
3
4
5 (for
wireless
reception)
No searched the ECG device!
No found printer in the system,
Possible Reason
Solution
1. The ECG monitor and the PC
USB interface dose not contact
well!
2. The device isn’t switched on!
3. The PC USB interface is
damaged.
4. The provided PC USB cable is
damaged!
5. The device is in trouble.
1. Please try again to check whether the
USB cable is well contacted with the PC
and the unit.
2. Please switch on the device.
3. Please upload the data again after
replacing a USB interface
4. Please contact the local dealer in case
of any problems.
5. Please contact the local dealer in case
of any problems.
No ECG waveform record is
detected in the device.
Please upload the data after the device
detects the ECG waveforms.
1. The USB cable is damaged.
2. The device is in trouble!
3. The PC USB interface
damaged.
1. Please contact the local dealer in case
of any problems.
2. Please contact the local dealer in case
of any problems.
3. Please upload the data again after
replacing the USB in interface.
is
The system does not install the
printer.
Please install a printer.
1. The device is not switched on
2. Plug or unplug the wireless
adapter while the software
“ECG Viewer Manager” is
being used.
3. The USB interface is damaged
1. Please switch on the device
2. Please restart the computer
3. Please restart the computer after
replacing the interface.
please try again after installing!
Please check whether the device
is in communication status
23
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising