Bissell Steam Mop User`s guide

Add to my manuals
20 Pages

advertisement

Bissell Steam Mop User`s guide | Manualzz

USER'S GUIDE

94Y2, 27F6, 35K3, 73H5 SERIES

2 Thank You

3 Safety Instructions

4-5 Product View

6 Assembly

7-12 Operations

13-15 Maintenance and Care

16 Troubleshooting

17 Accessories

18 Replacement Parts

19 Warranty

20 Product Registration

20 Consumer Services

Earn BISSELL Rewards!

R egister your product today!

See details on back page

T hanks for buying a BISSELL Deep Cleaner

We’re glad you purchased a BISSELL deep cleaner. Everything we know about floor care went into the innovative design and construction of this complete, high-tech home cleaning system.

Your BISSELL deep cleaner is well made, and we back it with a limited two year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today,

BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL deep cleaner.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

Chairman, President & CEO

DETACHABLE INNOVATION

Complete Line of BISSELL Lift-Off ® Products

Lift-Off ®

Steam Mop

Lift-Off ®

Deep Cleaner

Lift-Off ® Lift-Off ®

Multi Cyclonic

Vacuum

Floors & More

Cordless Stick Vacuum

For more information visit www.bissell.com

2 w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

I

MPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the following:

Read all instRuctions befoRe using youR deeP cleaneR.

WARNING:

To reduce the risk of fire, electric shock, or injury:

■ Do not immerse.

■ Use only on surfaces moistened by the cleaning process.

■ Always connect to a properly grounded outlet.

■ See Grounding Instructions.

■ Unplug from outlet when not in use and before conducting maintenance or troubleshooting.

■ Do not leave machine when it is plugged in.

■ Do not service machine when it is plugged in.

■ Do not use with damaged cord or plug.

■ If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized Service Center.

■ Do not expose to rain, store indoors.

■ Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces.

■ Unplug by grasping the plug, not the cord.

■ Do not handle plug or appliance with wet hands.

■ Do not put any object into appliance openings, use with blocked opening, or restrict air flow.

■ Do not expose hair, loose clothing, fingers or body parts to openings or moving parts.

■ Do not pick up hot or burning objects.

■ Do not pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapor.

■ Do not use appliance in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.

■ Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, gasoline, etc.).

■ Do not modify the 3-prong grounded plug.

■ Do not allow to be used as a toy.

■ Do not use for any purpose other than described in this User’s Guide.

■ Do not unplug by pulling on the cord.

■ Use only manufacturer’s recommended attachments.

■ Use only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage. See the cleaning fluid section of this guide.

■ Keep openings free of dust, lint, hair, etc.

■ Do not point attachment nozzle at people or animals

■ Keep appliance on a level surface.

■ Turn off all controls before unplugging.

■ Unplug before attaching the TurboBrush ® .

■ Be extra careful when cleaning stairs.

■ Close attention is necessary when used by or near children.

SAVE THESE

INSTRUCTIONS.

this model is foR household use only.

GROUNDING

INSTRUCTIONS

this appliance must be connected to a grounded wiring system. if it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. the cord for this appliance has an equipment-grounding conductor and a grounding plug. it must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Grounded

Outlets

Grounding Pin

WARNING: improper connection of the equipmentgrounding conductor can result in a risk of electrical shock. check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. do not modify the Plug. if it will not fit the outlet, have a proper outlet installed by a qualified electrician. this appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the drawing above. make certain that the appliance is connected to an outlet having the same configuration as the plug. no plug adapter should be used with this appliance.

3 w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

P roduct view

Upper Handle

Carry Handle

Heat

Indicator Light

Formula &

Water Tank

Power Button

Power Cord

Quick Release™

Cord Wrap

Flex Hose

Dirty Tank

Portable Spot

Cleaning Release

Pedal

Edge Sweep ®

Brushes

Removeable

Nozzle

4 w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

P roduct view

Spray Trigger

Cord Clip

Tool Storage

Support Handle

Tool Storage

(some models)

Hose Secure

Latch

Recline Pedal

WARNING:

to reduce the risk of fire and electric shock due to internal component damage, use only bissell cleaning fluids intended for use with the deep cleaner.

Cleaning fluid

Keep plenty of genuine bissell 2X formula on hand so you can clean and protect whenever it fits your schedule. always use genuine bissell deep cleaning formulas. non-bissell cleaning solutions may harm the machine and will void the warranty.

bissell

2X

Professional deep cleaning formula with bissell

2X fiber cleansing formula with scotchgard ™

Protection bissell

2X Pet stain and odor formula with scotchgard

Protection

™ bissell

2X allergen cleansing formula bissell

2X natural orange formula bissell

2X lavender essence formula bissell tough stain

Precleaner scotchgard ™

Protection w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

5

A ssembly

Your deep cleaner comes in two easy to assemble components:

1. upper handle

2. Portable spot cleaner/base

The only tool you will need to assemble your cleaner is a Phillips screwdriver.

1. slide upper handle onto base

2. screw the four included screws into the marked holes.

Note: two of the holes are located underneath the support handle indicated by graphics. Angle screwdriver to secure into place.

1.

3. Wrap power cord around Quick Release cord Wrap.

2.

4. Wrap flex hose around the hose wrap and secure with hose secure latch.

5. snap attachment(s) into the back of unit.

1.

2.

Screw Holes

Warning:

Do not plug in your cleaner until you have completely assembled it per the above instructions and are familiar with all instructions and operating procedures.

6 w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

O

perations

Special features

Innovative cleaning technology

This innovative deep cleaner offers two machines in one. The upright deep cleaner uses the power of heat, brushes and cleaning formula to get deep down dirt for a maximum clean. The portable spot cleaner detaches to clean tough spots and stains and hard to reach areas.

Hot water heater

This deep cleaner features a patented built-in hot water heater which will heat the hot tap water you put in to safely optimize cleaning effectiveness. The heater temperature is limited to prevent carpet damage. The heater automatically turns on when you turn the machine on. This operates only in upright cleaning mode.

Scotchgard™ Protector

Carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. To help restore this important protection, only BISSELL offers deep cleaning formulas with Scotchgard protector. This offers extra protection against dirt and tough stains to keep your carpets looking good longer.

To maintain your Scotchgard 5-year limited stain warranty, you do not need to hire a professional. By using your BISSELL deep cleaner with BISSELL 2X formulas containing

Scotchgard protector every 12 months, your carpet warranty from 3M remains in effect.

No other home deep cleaning system can do this for you. Refer to the Scotchgard Protector warranty for details.

Pedal graphic

Tip: for easy carrying, grab the carry handle portable spot cleaner and balance with the handle on the back of the machine.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

7

O

perations

Before you clean

1. move furniture to another area if cleaning an entire room (optional).

2. Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning.

3. Pretreating (optional):

3a. Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryway and hallways.

3b. BISSELL Tough Stain precleaner spray the bissell tough stain precleaner formula onto heavy traffic areas, soiled areas or stains. allow to penetrate for at least 3 minutes. clean as normal, using the deep cleaner in upright mode, following the instructions below.

Upright cleaning mode

Filling formula & water tank

1. Remove tank from the base of the machine by lifting up tank carry handle.

Note: This tank was designed with a flat bottom so it can be easily filled.

2. unscrew the black cap and remove bottle insert.

3. fill tank with hot tap water to the water fill line. add two ounces of bissell 2X formula to the tank.

4. Replace the bottle insert in the tank and tighten the black cap. Replace the tank on the deep cleaner.

Cleaning

1. Plug into a proper outlet and press the power button. allow 1 minute for the hot water heater to warm-up before cleaning.

2. While pressing the trigger, make one slow forward wet pass and another one back.

1.

ATTENTION:

some berber carpets have a tendency to fuzz with wear.

Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition.

3b.

2.

8 w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

O

perations

Upright cleaning mode continued

Cleaning continued

3. Release the trigger and make one slow forward and backward pass over the same area. Repeated passes will help aid in dry time.

4. continue passes until cleaning area is complete.

Note: Your machine may be equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll. If that happens, be sure to unplug your machine, remove the foreign object, and then plug the machine back in to reset the circuit breaker.

Empty dirty tank

1. When the dirty tank reaches the

“FULL” line on the tank it is time to empty.

2. Remove dirty tank and carry to a utility sink, toilet or outside (where you will dispose of the dirty water).

3. to unlock the dirty tank lid, rotate handle over the back of the tank. Remove lid and pour out dirty water. Rinse out dirty tank to remove any debris.

4. Replace top of tank, and rotate the handle forward to lock in place on front of tank.

Cleaning your machine

1. flush out machine of any remaining residual solution. fill the formula & water tank with hot tap water and turn on your machine.

Recline handle and press the spray trigger for about 15 seconds while making forward and backward passes on carpet. continue without pressing the trigger until there is no more water being suctioned up. turn off the machine and wrap the powercord. make sure the dirty tank and the formula & water tank are emptied, rinsed, and dried before the next use.

before you replace tank, clean all debris from red filter screen.

2.

CAUTION:

Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure.

Tip: make only one trip to the sink by removing the entire portable cleaner. fill and empty in the same trip.

WARNING:

to reduce the risk of fire, electric shock, or injury, turn power off and disconnect plug from electrical outlet before performing maintenance or troubleshooting.

Tip:

3.

4.

for best results empty, rinse and dry both tanks before storing. w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

9

O

perations

Upright cleaning mode continued

Cleaning your machine continued

2. Rinse front nozzle of any dirt and debris.

Remove portable spot cleaner from the base of the machine. unscrew three screws with Phillips screw driver and remove nozzle.

Rinse nozzle out at the faucet.

Place back onto the machine by hooking the tabs into the holes on the bottom sides of the machine. secure with screws.

2.

3. the inside of the end caps can be wiped out with a clean paper towel, or for a more thorough clean, the end caps can be taken off and rinsed clean.

4. any loose hair or debris can be pulled from the brush rolls and thrown away. for a more thorough clean, follow directions on page 15 for removal of brush rolls.

your machine is now ready to be stored.

Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing.

Freezing will damage internal components and void the warranty.

WARNING:

to reduce the risk of fire, electric shock or injury unplug from outlet before servicing.

Tip: let all parts dry completely and replace onto machine.

10 w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

O

perations

Portable spot cleaning mode

Preparing the machine

1. step on the portable spot cleaning pedal to release the portable spot cleaner.

2. Release flex hose by twisting the hose secure latch clockwise. unwrap flex hose completely.

3. attach the desired tool to the hose grip until it snaps together. make certain the tool is securely attached.

4. twist the Quick Release cord wrap clockwise to unwrap the power cord completely and plug into grounded outlet.

Filling tank

1. follow the instructions for filling the tank in the upright cleaning mode section on page 8

Cleaning with Tools:

ImPORTANT! If using to clean upholstery, check upholstery tags. Check manufacturer’s tag before cleaning.

“W” or “WS” on the tag means you can use your Lift off Deep Cleaner if the tag is coded with an “X” or an

“S”(with a diagonal stripe through it), or says “Dry Clean Only”, do not proceed with any deep cleaning machine.

Do not use on velvet or silk. If manufacturer’s tag is missing or not coded, check with your furniture dealer.”)

1. hold the tool approximately 1" above the soiled surface. Press the spray trigger to apply the cleaning solution to the soiled area.

Note: Hold end of hose below the tank water level to help prime the portable spot cleaner.

2. using the brush on the tool, gently scrub the area to be cleaned.

3. apply downward pressure on the tool and pull it toward you. the suction will remove the dirt and cleaning solution. continue until no more dirt can be removed.

Adsdfdd ghg bvh lgh

Manufacturer’s tag

ImPORTANT

Check for colorfastness in an inconspicuous place. If possible, check upholstery stuffing.

Colored stuffing may bleed through fabric w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

11

O

perations

Portable spot cleaning mode continued

Cleaning with Deep Reach™ Tool

1. set tool on soiled surfaces and press the trigger to spray solution onto the soiled area to be cleaned.

2. slowly move the tool back and forth over the soiled surface, keeping the tool in contact with the carpet.

Release trigger and move tool slowly over the soiled area to suction up water and dirt.

4. continue to clean the area, working in small sections, until no more dirt can be removed.

1.

Empty dirty tank

Follow the instructions under Empty dirty tank section on page 9 of the

Upright cleaning mode section. 1.

Replacing portable machine on base

1. align the product as the graphic shows, with the cord side on the left and hose side on the right.

2. Push down the portable spot cleaner until you hear it click securely into place. test the fit by pulling up on the carry handle to make sure it is secure.

Cleaning portable machine

1. Remove and rinse the tools in clean, running water. dry and replace in the tool storage provided.

2. it is recommended that you suction clean water from a bowl to rinse out the hose. then lift end of hose and stretch out to ensure all water is cleared from hose.

3. coil flex hose around the hose wrap and secure with latch.

4. check suction gate and if it appears dirty, follow steps 1-4 under cleaning suction gate on page 13.

3.

graphic

12

M

aintenance and care machine care (check regularly)

Cleaning suction gate

The suction gate automatically diverts air when the portable deep cleaner is detached. This should be checked and cleaned regularly for any dirt and debris.

1. step on the pedal and remove the portable spot cleaner.

Remove dirty tank.

2. Remove two screws and pull off suction gate door.

3. Wipe suction gate clean and rinse suction gate door.

4. Replace suction gate door and two screws.

Cleaning spray tips

1. step on the pedal and remove the portable spot cleaner. to remove, push in tab and pull it out.

2. clean by rinsing under hot water.

3. Replace by snapping back in.

4. Repeat steps on second spray tip.

Suction gate

Spray

Tips

1.

2.

WARNING:

to reduce the risk of fire, electric shock, or injury, turn power off and disconnect plug from electrical outlet before performing maintenance or troubleshooting.

Cleaning solution filter

1. step on the pedal and remove the portable spot cleaner. Remove the red solution filter cap on the base of the machine by inserting a coin or a flat head screw driver into the slot on the top.

2. turn counter clockwise to unscrew. set aside.

3. Remove the white filter by the post.

Rinse the filter under water.

4. Replace the white filter back into the filter area.

Note: make sure the white filter is seated properly before replacing the red solution filter cap.

2.

Solution

Filter Cap

3.

5. Replace the red solution filter cap and turn clockwise to tighten.

5.

Filter w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

13

M

aintenance and care

Small belt removal and replacement (as needed)

Occasional replacement of one or both belts may become necessary.

If that is needed, please follow the instructions below.

1. turn off the machine, and unplug it from the outlet. Remove portable spot cleaner.

2. Remove the nozzle by unscrewing three screws on the nozzle cover.

3. turn the machine on its side.

ImPORTANT: with portable spot cleaning pedal facing down.

4. Remove end cap by unscrewing the

3 screws. take care not to drop the screws into the unit.

5. Remove 1 silver screw from the pivot arm.

6. Remove pivot arm by gently lifting up.

7. Remove small brush belt.

8. Replace small brush belt, and reverse steps above.

9. manually rotate brushes by hand to make sure they move freely. may notice a slight resistance from the motor.

2.

4.

6.

WARNING:

to reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing.

5.

7.

8.

14 w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

M

aintenance and care

Brush removal and large belt replacement (as needed)

Brushes can be removed for cleaning or replacement as needed.

1. follow small belt removal instructions on page 14 items 1-7.

2. Remove brush rolls by pulling them off of the metal rods. Be careful not to lose the small washer at each end of the brush rolls.

WARNING:

to reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing.

2.

3.

3. Re-attach the large belt to the grooves on the end of the new brush rolls. if the belt is damaged, replace with a new belt.

4. Place cleaned or new brush rolls back onto the rods. make sure one washer is on each end of the rollers prior to sliding onto the rod. be sure the brush is seated completely on the rod.

5. Replace small belt over grooves in back roller and metal cog.

6. Replace pivot arm and secure with silver screw.

7. Re-attach end cap by tightening with the

(3) black screws.

8. Return front nozzle to front of unit, by latching from underneath and then securing with 3 screws.

9. follow step number 8 & 9 on page 14.

if you have any questions or are having trouble installing or replacing your belt(s) or brushes, please call

BISSELL Consumer Services.

4.

6.

8.

5.

7.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

15

T

roubleshooting

Built-in heater ready light does not illuminate

Possible causes Remedies

1. The power is not turned ON 1. The power must be ON to activate the heater ready light

2. The portable spot cleaner is not attached completely

Reduced Spray or No Spray

Possible causes

1. Formula & water tank may be empty

2. Formula & water tank may not be seated completely

3. Pump may have lost prime in portable spot cleaning mode

4. The portable spot cleaner is not attached completely

5. Solution filter may be clogged

DirtLifter ® PowerBrush does not turn

Possible causes

1. The portable spot cleaner is not attached completely

2. The unit is in the upright position

3. Circuit breaker on machine (if equipped) may have tripped

4. The belt is off or broken

Loss of suction power

Possible causes

1. Tanks may not be seated properly

2. Nozzles may not be assembled properly

3. The portable spot cleaner is not attached completely

4. Dirty tank has picked up maximum amount of

dirty water and has reached full line

5. Formula & water tank is empty

2. Make sure the portable spot cleaner is attached

Push down firmly to check

Remedies

1. Refill tank

2. Turn power OFF. Remove and reseat tank

3. Hold end of hose below water level in tank to prime

4. Push down firmly to check connection

5. Follow steps under cleaning filter on page 13

Remedies

1. Make sure the portable spot cleaner is attached.

Push down firmly to check

2. Brushes only rotate when unit is reclined using the recline pedal

3. Turn the machine OFF and unplug from outlet. Check

to see if foreign object is caught in brush roll. Remove

object. Plug machine in to reset circuit breaker

4. Turn power OFF and unplug unit from outlet. Follow

instructions on pages 14 and 15

Remedies

1. Pick up both tanks and reseat them so it they fit snugly on the unit

2. Unplug the unit. Check to make sure the "lip" of the

nozzle is securely hooked into the groove on bottom of

Tank (see page 10)

3. Make sure the portable spot cleaner is attached.

Push down firmly to check

4. Empty dirty tank

5. Check fluid levels in formula & water tank

6. Suction Gate is open. 6. Check to make sure the suction gate is closed. Follow

“Cleaning Suction Gate” instructions on page 13.

Other maintenance or service not included in the manual should be performed by an authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store.

16

For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

6

11

16

1

A

ccessories - BISSELL deep cleaner

Item Part No. Part Name

9

10

11

12

13

14

15

16

5

6

7

8

1

2

3

4

203-6651 3” tough stain tool

203-6652 Powered turbobrush ® hand tool

203-6653 4” upholstery tool

203-6654 6” stair tool

203-7885 spraying crevice tool

203-7412 deep Reach Pet tool

62e5-2

99K5-2

89Q5-2

83P3-2

34b5-2

78h6-3

26V2

0790

4001

2X fiber cleansing formula with scotchgard

2X Pet stain and odor formula with scotchgard

2X allergen cleansing formula 60 oz.

2X natural orange formula 60 oz.

2X lavender essence formula 60 oz.

2X Professional deep cleaning formula with scotchgard ™ Protection 48 oz.

2X spring breeze formula 60oz.

Pet stain and odor Remover ™ 16 oz.

tough stain Precleaner 22 oz.

310-3040 mesh bag

™ Protection 60 oz.

™ Protection 60 oz.

*not all parts are included with every model.

2 3 4 5

7

12

8

13

9

14

10

15 w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

17

R

eplacement parts - BISSELL deep cleaner

Below please find a list of common replacement parts. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired.

Item Part No. Part Name

1

10.

11.

12.

13.

14.

15.

16.

6.

7.

8.

9.

2.

3.

4.

5.

17.

203-7893 formula & Water tank assembly (includes cap and insert)

203-6675 cap and insert for formula & Water tank

203-7894 dirty tank assembly (includes entire tank)

203-7904 cord Wrap

203-7896 end caps with edge brushes (2 pack, includes screws)

203-7897 spray tips assembly (includes two spray tips)

203-7898 in-line filter assembly (includes cap and filter)

203-7901 nozzle gasket

203-7906 nozzle cover assembly (includes gasket, nozzle cover, and front nozzle cover)

203-7907 front nozzle

203-7915 brush assembly (includes 2 brush rolls, 2 axles, and 2 swivel arms)

203-7916 brush single Pack (includes 1 brush roll, and 1 axle)

203-7900 small brush belt

203-7899 large brush belt

203-6689 hose secure latch

203-7918 dirty tank gasket assembly (include both gaskets )

203-7917 diverter cover assembly (includes cover and screws)

*Not all parts are included with every model.

1 2 3 4 5

6 7 8 9 10

11 12 13 14 15

16 17

18 w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

W

arranty -

A

ccessories - BISSELL deep cleaner

this warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. if you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact bissell consumer services by e-mail, telephone, or regular mail as described below.

Limited Two Year Warranty subject to the *eXcePtions and eXclusions identified below, upon receipt of the product bissell homecare, inc. will repair or replace (with new or remanufactured components or products), at bissell’s option, free of charge from the date of purchase by the original purchaser, for two year any defective or malfunctioning part.

see information below on "if your bissell product should require service".

this warranty applies to product used for personal, and not commercial or rental service. this warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the user's guide is not covered.

If your BISSELL product should require service: contact bissell consumer services to locate a bissell authorized service center in your area. if you need information about repairs or replacement parts, or if you have questions about your warranty, contact bissell consumer services.

Website or E-mail: www.bissell.com

Or Call: bissell consumer services

1-800-237-7691 monday - friday 8 a.m. - 10 p.m. et saturday 9 a.m. - 8 p.m. et

Or Write: bissell homecare, inc.

Po box 3606 grand Rapids, mi 49501 attn: consumer services bissell homecaRe, inc. is not liable foR incidental oR conseQuential damages of any natuRe associated With the use of this PRoduct. bissell’s liability Will not eXceed the PuRchase PRice of the PRoduct.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

*EXCEPTIONS AND EXCLUSIONS FROm THE TERmS OF THE LImITED WARRANTY this WaRRanty is eXclusiVe and in lieu of any otheR WaRRanties eitheR oRal oR

WRitten. any imPlied WaRRanties Which may aRise by oPeRation of laW, including the imPlied WaRRanties of meRchantability and fitness foR a PaRticulaR PuRPose, aRe limited to the tWo yeaR duRation fRom the date of PuRchase as descRibed aboVe.

some states do not allow limitations on how long an implied warranty last so the above limitation may not apply to you.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

19

D on't forget to register your product!

Registering is quick, easy and offers you benefits over the lifetime of your product. you’ll receive:

BISSELL Rewards Points automatically earn points for discounts and free shipping on future purchases.

Faster Service supplying your information now saves you time should you need to contact us with questions regarding your product.

Product Support Reminders and Alerts

We’ll contact you with any important product maintenance reminders and alerts.

Special Promotions optional: Register your email to receive notice of offers, contests, cleaning tips and more!

Visit www.bissell.com/registration now!

B

ISSELL consumer services

For information about repairs or replacement parts, or questions about your warranty, call:

BISSELL Consumer Services

1-800-237-7691

Monday - Friday 8 a.m. — 10 p.m. ET

Saturday 9 a.m. — 8 p.m. ET

Or write:

BISSELL Homecare, Inc.

PO Box 3606

Grand Rapids MI 49501

ATTN: Consumer Services

Or visit the BISSELL website - www.bissell.com

When contacting BISSELL, have model number of cleaner available.

Please record your Model Number: ___________________

Please record your Purchase Date: ___________________

NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim. See Warranty on page 19 for details.

20

©2011 bissell homecare, inc grand Rapids, michigan all rights reserved. Printed in china

Part number 120-4346

Rev 5/11

Visit our website at: www.bissell.com

scotchgard is a trademark of 3m w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement