datasheet for 5305 by Pomona Electronics

datasheet for 5305 by Pomona Electronics
Model 5305
Breakout: BNC (Female) To SMD
Grabber Test Clips
FEATURES:
Converts BNC (male) cables / connectors to SMD test clips for test versatility.
Grabber pincer and BNC center contact are gold plated excellent corrosion resistance and low contact resistance to
ensure test signal integrity.
BNC connector is molded directly to the wire for pull strength durability and dust and moisture resistance.
SMD clips attach to terminals up to .040” (1,0mm) diameter.
Black wire is connected to BNC shell, red wire to BNC center contact.
MATERIALS:
BNC: Nickel Plated Brass, Center Contact: Gold Plated Beryllium Copper
Dielectric: PTFE
Wire: 22 AWG, PVC Insulated
Grabber Pincer: Stainless Steel, Gold Plated, Spring: Stainless Steel
Insulation: Glass Filled Nylon, color matches color of wire
RATINGS:
Operating Voltage: Hands free testing in controlled voltage environments: 150 VRMS Max.
Operating Temperature: +131°F (+55°C) Max.
ORDERING INFORMATION: Model 5305*
* Custom lengths are available, contact Pomona Product Support at: 1-800-241-2060
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 100
D1094366
Page 1 of 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement