Secrétariat général de la défense et de la sécurité nationale

Secrétariat général de la défense et de la sécurité nationale
PREMIER MINISTRE
Secrétariat général de la défense et de la sécurité nationale
Agence nationale de la sécurité des systèmes d’information
Certification Report ANSSI-CC-2010/57
CC IDeal Citiz SmartCard (on
SB23YR48B), version 1.4.5
IAS ECC application with PIN or MOC
authentication
Paris, 17th September 2010
Courtesy Translation
Certification report ANSSI-CC-2010/57
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
Warning
This report is designed to provide sponsors with a document enabling them to assess the
security level of a product under the conditions of use and operation defined in this report for
the evaluated version. It is also designed to provide the potential purchaser of the product with
the conditions under which he may operate or use the product so as to meet the conditions of
use for which the product has been evaluated and certified; that is why this certification report
must be read alongside the evaluated user and administration guidance, as well as with the
product security target, which presents threats, environmental assumptions and the supposed
conditions of use so that the user can judge for himself whether the product meets his needs in
terms of security objectives.
Certification does not, however, constitute a recommendation product from ANSSI (French
Network and Information Security Agency), and does not guarantee that the certified product
is totally free of all exploitable vulnerabilities.
Any correspondence about this report has to be addressed to:
Secrétariat général de la défense et de la sécurité nationale
Agence nationale de la sécurité des systèmes d'information
Centre de certification
51, boulevard de la Tour Maubourg
75700 PARIS cedex 07 SP
France
[email protected]
Reproduction of this document without any change or cut is authorised.
Page 2 out 18
CER/F/07.5
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
Certification report ANSSI-CC-2010/57
Certification report reference
ANSSI-CC-2010/57
Product name
CC IDeal Citiz SmartCard (on SB23YR48B)IAS ECC application with PIN or MOC authentication
Product reference, version
IDEALMOC/SB23YR48/1.4.5, Version 1.4.5
Protection profile conformity
[PP0005], Secure Signature-Creation Device Type 2,
version 1.04
[PP0006], Secure Signature-Creation Device Type 3,
version 1.05
Evaluation criteria and version
Common Criteria version 3.1
Evaluation level
EAL 5 augmented
ALC_DVS.2, AVA_VAN.5
Developers
SAGEM Sécurité
ST Microelectronics
Etablissement d’Osny, 18 Chaussée Jules
César, 95520 Osny, France
29 Boulevard Romain Rolland, 75669 Paris
cedex 14, France
Sponsor
SAGEM Sécurité
Etablissement d’Osny, 18 Chaussée Jules César, 95520 Osny, France
Evaluation facility
CEA - LETI
17 rue des martyrs, 38054 Grenoble Cedex 9, France
Phone: +33 (0)4 38 78 40 87, email : [email protected]
Recognition arrangements
CCRA
SOG-IS
The product is recognised at EAL4 level.
Page 3 out 18
Certification report ANSSI-CC-2010/57
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
Introduction
The Certification
Security certification for information technology products and systems is governed by decree
number 2002-535 dated April, 18th 2002, modified. This decree stipulates that:
• The French Network and Information Security Agency draws up certification
reports. These reports indicate the features of the proposed security targets. They may
include any warnings that the authors feel the need to mention for security reasons.
They may or may not be transmitted to third parties or made public, as the sponsors
desire (article 7).
•
The certificates issued by the Prime Minister certify that the copies of the products or
systems submitted for evaluation fulfil the specified security features. They also
certify that the evaluations have been carried out in compliance with applicable rules
and standards, with the required degrees of skill and impartiality (article 8).
The procedures are available on the Internet site www.ssi.gouv.fr.
Page 4 out 18
CER/F/07.5
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
Certification report ANSSI-CC-2010/57
Contents
1.
THE PRODUCT ........................................................................................................................... 6
1.1.
PRESENTATION OF THE PRODUCT........................................................................................... 6
1.2.
EVALUATED PRODUCT DESCRIPTION ..................................................................................... 6
1.2.1.
Product identification.................................................................................................... 6
1.2.2.
Security services............................................................................................................ 7
1.2.3.
Architecture................................................................................................................... 7
1.2.4.
Life cycle ....................................................................................................................... 8
1.2.5.
Evaluated configuration................................................................................................ 9
2.
THE EVALUATION.................................................................................................................. 10
2.1.
2.2.
2.3.
2.4.
3.
EVALUATION REFERENTIAL ................................................................................................. 10
EVALUATION WORK ............................................................................................................. 10
CRYPTOGRAPHIC MECHANISMS ROBUSTNESS ANALYSIS..................................................... 10
RANDOM NUMBER GENERATOR ANALYSIS .......................................................................... 11
CERTIFICATION...................................................................................................................... 12
3.1.
CONCLUSION ........................................................................................................................ 12
3.2.
RESTRICTIONS ...................................................................................................................... 12
3.3.
RECOGNITION OF THE CERTIFICATE ..................................................................................... 12
3.3.1.
European recognition (SOG-IS).................................................................................. 12
3.3.2.
International common criteria recognition (CCRA) ................................................... 13
ANNEX 1.
EVALUATION LEVEL OF THE PRODUCT.......................................................... 14
ANNEX 2.
EVALUATED PRODUCT REFERENCES .............................................................. 16
ANNEX 3.
CERTIFICATION REFERENCES ........................................................................... 18
Page 5 out 18
Certification report ANSSI-CC-2010/57
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
1. The product
1.1.
Presentation of the product
The evaluated product is the « CC IDeal Citiz smartcard (on SB23YR48B),
IDEALMOC/SB23YR48/1.4.5, Version 1.4.5 » developed by SAGEM Sécurité and ST
Microelectronics.
The evaluated product is a dual smartcard (contact and contactless). It is composed of:
- three applications :
o the AIP application which performs the pre-personalization and the
personalization operations of the smartcard. This application is not accessible
once in Operational Use phase,
o the ICAO application which implements the machine readable travel document
features and which may be instantiated several times on the product,
o the IAS (Identity Authentication Signature) application which allows to
generate, destroy and load keys to generate digital signature.
- and an opened JacaCard System which allows to load applets on the product during its
Operational Use phase.
1.2.
Evaluated product description
The security target [ST] defines the evaluated product, its evaluated security functionalities
and its operational environment.
The security target is conformant to the[PP0005] and [PP0006] protection profiles, adapted to
the CC version 3.1 (as those PP has been written according to the CC version 2.1)
1.2.1. Product identification
The configuration list [CONF] identifies the product’s constituent elements.
The certified version of the product can be identified by the following elements:
- product’s name and version : CC Ideal Citiz, version 1.4.5;
- microcontroller’s name and version: SB23YR48B;
- commercial reference (SAGEM) : IDEALMOC/SB23YR48/1.4.5;
- whole
embededd
software
reference
(SAGEM
OFFICIEL_IDEAL_ST23YR80_1_4_50;
- ST Microelectronics reference: SB23YR48 QPX (masked chip).
ORGA)
Every version of the software components of the certified version of the product can be
checked according to the command and responses identified in the installation guidance of the
product (see [GUIDES]).
Page 6 out 18
CER/F/07.5
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
Certification report ANSSI-CC-2010/57
1.2.2. Security services
The TOE provides mainly the following evaluated security services:
o generation of private and public signing keys ;
o destruction of the private and public signing keys ;
o import of private signing key;
o signature creation (based on RSA or elliptic curves mechanisms);
o PIN or biometric fingerprint (Match On Card method) authentication of the
signatory.
1.2.3. Architecture
The product consists of
- the SB23YR48B microcontroller, developed and produced by ST Microelectronics ;
- software parts, developed by SAGEM Sécurité, which CVS reference is
OFFICIEL_IDEAL_ST23YR80_1_4_00, masked in the microcontroller’s ROM,
composed of:
o the OPUCE operating system;
o the HAL hardware abtract layer;
o the JacaCard System;
o the AIP card initialization and personalization application;
o and the IAS and ICAO applications ;
- the IAS application patch, version 5.0, developed by SAGEM Sécurité, loaded into the
microcontroller’s EEPROM.
AIP Data
ICAO Data
IAS Data 1
IAS Data n
AIP Instance
ICAO instance
IAS
instance 1
IAS
instance n
AIP application
ICAO application
IAS application
JCS
(VM JCRE)
Application manager
AIP Specific
ICAO specific
VGP
IAS Specific
Operating System
Operating System
HAL
Deactivated in user phase
TOE
The TOE is the IAS Application, together with the functions/services provided by the
operating system and the microcontroller IC required to support the applet functionalities.
Page 7 out 18
Certification report ANSSI-CC-2010/57
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
The evaluation facility verified the isolation between the various applications, notably
between those in the TOE with those not included in the TOE. The evaluation facility verified
that a Java applet could only access to its own data and not to those belonging to another
applet.
1.2.4. Life cycle
The product’s life cycle is organised as follow:
Phase 1 Step 1
Development
SAGEM (Osny)
Patch development
Step 2
IC design and dedicated
software development
STM (Rousset,
Singapour, Zaventem)
Step 3
STM (Rousset)
DPE Agrape
DPE Tokyo
Manufacturing
Phase 2
Personalization
Embedded software
development
STM (Rousset)
Integration
Photomask fabrication
IC manufacturing, test and
possible pre personalization
-
Step 4
IC packaging and initialization
Step 5
Phase 3
IC pre-personalization:
Create application/
Create LDS File System
Step 6
Personalization
Usage
Phase 4
Legend
Step 7
Usage
End of life
Trusted delivery and
verification procedures
Delivery supposed to
be done within
secure environment
Patch loading is protected by the AIP application.
Page 8 out 18
CER/F/07.5
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
Certification report ANSSI-CC-2010/57
The embedded software has been developed on the following site:
SAGEM Sécurité - Etablissement d’Osny
18 Chaussée Jules César
95520 Osny
France
The microcontroller development sites are identified in the [2010/02] certification report.
1.2.5. Evaluated configuration
The certificate applies to the opened configuration of this product (applets can be loaded on
the product in operational phase, phase 7).
The product tested by the evaluation facility is typical to the final product.
The signatory’s authentication method, PIN or MOC, is decided in the personalization phase
of the smartcard. Administration guidance of this product provides description of the objects
that need to be created to use one of those two authentication methods. User guidance
describes the services allowing to use those objects as well as the security measures that have
to be applied to meet the [ST] security objectives.
Page 9 out 18
Certification report ANSSI-CC-2010/57
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
2. The evaluation
2.1.
Evaluation referential
The evaluation has been performed in compliance with Common Criteria version 3.1 [CC]
and with the Common Evaluation Methodology [CEM]
In order to meet the specificities of smart cards, the [CC AP] and [COMP] guides have been
applied.
2.2.
Evaluation work
The evaluation has been performed according to the composition scheme as defined in the
guide [COMP] in order to assess that no weakness comes from the integration of the software
in the microcontroller already certified.
Therefore, the results of the evaluation of the microcontroller “SB23YR48B with Neslib
version 3.0” at EAL6 level augmented with ALC_FLR.1, compliant with the [PP0035]
protection profile, have been used. This microcontroller has been certified the 10 February
2010 under the reference ANSSI-CC-2010/02. The maintenance report ANSSI-2010/02-M01
has also been issued the 19th March 2010 for this product.
The evaluation relies on the evaluation results of the « CC IDeal Citiz SmartCard (on
SB23YR48B), version 1.4.5 » product certified, according to [PP0005] and [PP0006], under
the reference ANSSI-CC-2010/22.
The evaluation technical report [ETR], delivered to ANSSI the 10th September 2010, provides
details on the work performed by the evaluation facility and assesses that all evaluation tasks
are “pass”.
2.3.
Cryptographic mechanisms robustness analysis
The robustness of cryptographic mechanisms has been analysed by ANSSI according to
[REF-CRY]. The results are stated in the cryptographic analysis report [ANA-CRY] which
concludes that:
- the ECDSA signature schema offered by this product does not conform to the
referential;
- signature must be generated using the SHA-224 or SHA-256 functions;
- RSA modules and elliptic curves must be sized according to the referential rules;
- for the RSA signature schema, it is recommended to use a public exponent higher than
216.
Those results have been taken into account in the evaluator independent vulnerability analysis
and had not leaded to the identification of exploitable vulnerability for the aimed AVA_VAN
level.
Page 10 out 18
CER/F/07.5
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
2.4.
Certification report ANSSI-CC-2010/57
Random number generator analysis
The random number generator used by this product is the one provided by the microcontroller
(see [2010/02] certification report).
Page 11 out 18
Certification report ANSSI-CC-2010/57
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
3. Certification
3.1.
Conclusion
The evaluation was carried out according to the current rules and standards, with the required
competency and impartiality of a licensed evaluation facility. All the work performed permits
the release of a certificate in conformance with the decree 2002-535.
This certificate testifies that the “CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5”
submitted for evaluation fulfils the security features specified in its security target [ST] for the
evaluation level EAL 5 augmented.
3.2.
Restrictions
This certificate only applies on the product specified in chapter 1.2 of this certification report.
The user of the certified product shall respect the security objectives for the operational
environment specified in the security target [ST] at the 4.2 and 4.3 chapters, and shall respect
the recommendations in the guidance [GUIDES].
As the sensors are note included in the considered evaluation perimeter the evaluated product
do not prevent against false fingerprint.
3.3.
Recognition of the certificate
3.3.1. European recognition (SOG-IS)
This certificate is released in accordance with the provisions of the SOG-IS agreement [SOGIS].
Page 12 out 18
CER/F/07.5
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
Certification report ANSSI-CC-2010/57
The European Recognition Agreement made by SOG-IS in 2010 allows recognition from
Signatory States of the agreement1, of ITSEC and Common Criteria certificates. The
European recognition is applicable, for smart cards and similar devices, up to ITSEC E6 High
and CC EAL7 levels. The certificates that are recognized in the agreement scope are released
with the following marking:
3.3.2. International common criteria recognition (CCRA)
This certificate is released in accordance with the provisions of the CCRA [CC RA].
The Common Criteria Recognition Arrangement allows the recognition, by signatory
countries2, of the Common Criteria certificates. The mutual recognition is applicable up to the
assurance components of CC EAL4 level and also to ALC_FLR family. The certificates that
are recognized in the agreement scope are released with the following marking:
1 The signatory countries of the SOG-IS agreement are: Finland, France, Germany, The Netherlands, Norway,
Spain, Sweden and United Kingdom.
2 The signatory countries of the CCRA arrangement are: Australia, Austria, Canada, Czech Republic, Denmark,
Finland, France, Germany, Greece, Hungary, India, Israel, Italy, Japan, the Republic of Korea, Malaysia,
Netherlands, New-Zealand, Norway, Pakistan, Singapore, Spain, Sweden, Turkey, the United Kingdom and the
United States of America.
Page 13 out 18
Certification report ANSSI-CC-2010/57
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
Annex 1. Evaluation level of the product
Class
Family
Components by assurance level Assurance level of the product
EAL EAL EAL EAL EAL EAL EAL EAL
1
2
3
4
5
6
7
5+
ADV_ARC
ADV_FSP
ADV
Developmentt
1
1
1
1
1
1
1
1
2
3
4
5
5
6
5
1
1
2
2
1
2
3
3
2
Well-structured internals
1
1
ADV_IMP
ADV_INT
ADV_SPM
ADV_TDS
AGD
Guidance
ALC
Life-cycle
support
3
4
5
6
4
Semiformal modular design
AGD_OPE
1
1
1
1
1
1
1
1
Operational user guidance
AGD_PRE
1
1
1
1
1
1
1
1
Preparative procedures
ALC_CMC
1
2
3
4
4
5
5
4
ALC_CMS
1
2
3
4
5
5
5
5
1
1
1
1
1
1
1
Delivery procedures
1
1
1
2
2
2
Sufficiency of security measures
1
1
1
1
2
1
1
2
3
3
2
ALC_DEL
ALC_DVS
Production support, acceptance
procedures and automation
Development tools CM
coverage
ALC_FLR
Developer defined life-cycle
model
Compliance with
implementation standards
ASE_CCL
1
1
1
1
1
1
1
1
Conformance claims
ASE_ECD
1
1
1
1
1
1
1
1
Extended components definition
ASE_INT
1
1
1
1
1
1
1
1
ST introduction
ASE_OBJ
1
2
2
2
2
2
2
2
Security objectives
ASE_REQ
1
2
2
2
2
2
2
2
Derived security requirements
1
1
1
1
1
1
1
Security problem definition
1
1
1
1
1
1
1
TOE summary specification
1
2
2
2
3
3
2
Analysis of coverage
1
1
3
3
4
3
Testing: modular design
1
1
1
1
2
2
1
Functional testing
2
2
2
2
2
3
2
Independent testing: sample
ASE_SPD
ASE_TSS
1
ATE_COV
ATE_DPT
ATE_FUN
ATE_IND
Page 14 out 18
Complete semi-formal
functional specification with
additional error information
Implementation representation
of the TSF
2
ALC_TAT
ATE
Tests
Security architecture description
1
ALC_LCD
ASE
Security
Target
Evaluation
Name of the component
1
CER/F/07.5
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
Class
Family
Certification report ANSSI-CC-2010/57
Components by assurance level Assurance level of the product
EAL EAL EAL EAL EAL EAL EAL EAL
1
2
3
4
5
6
7
5+
AVA
Vulnerability
assessment
AVA_VAN
1
2
2
3
4
5
5
5
Name of the component
Focused vulnerability analysis
Page 15 out 18
Certification report ANSSI-CC-2010/57
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
Annex 2. Evaluated product references
[ST]
Reference security target for the evaluation:
- « Common Criteria security target – IAS ECC – Secure
Signature Creation Device – CC IDeal Citiz », reference SSE0000078723, révision 01,,
For the needs of publication, the following security target has been
provided and validated in the evaluation:
- « Common Criteria security target lite – IAS ECC – Secure
Signature Creation Device – CC IDeal Citiz », reference SSE0000078793, révision 02.
[ETR]
Evaluation technical report :
- « Réévaluation EOS - Rapport Technique d’Evaluation »,
reference LETI.CESTI.EOS.RTE.002, édition 3.2,
- « Réévaluation EOS (avec MOC) - Rapport Technique
d’Evaluation », reference LETI.CESTI.EOS.RTE.003, édition
1.1.
[ANA-CRY] « Cotation de mécanismes cryptographiques- Qualification EOS »,
n° 805/ANSSI/ACE/LCC du 2 avril 2010.
[CONF]
« IDEAL_– Software Release Sheet – V1.4.50», reference SSE0000075528, révision 22.
[GUIDES]
Installation guidance:
- «« IDEAL 1.4 procédure d’installation », reference SSE0000076822, version 01,
Administration guidance:
- « IDEAL – IAS ECC Functionnal specification », reference
SSE-0000067235, version 02,
- « ICAO Application Pre-personalization manual - Project : CC
Ideal Pass », reference SSE-0000074722, version 02,
- « IDEAL IAS ECC Personalization Guidance », reference: SSE0000064845, version 03,
- « ICAO Application Personalization manual - Project : CC Ideal
Pass », reference SSE-0000074723, version 04,
User guidance:
- « ICAO Application User manual - Project : CC Ideal Pass »,
reference SSE-0000074862, version 01,
- « IDEAL IAS ECC Operational User Guidance », reference:
SSE-0000065958, version 02.
[PP0005]
Protection Profile — Secure Signature-Creation Device Type 2,
Version: 1.04, 25 July 2001. Certified by BSI (Bundesamt für Sicherheit
in der Informationstechnik) under the referenc BSI-PP-0005-2002.
Page 16 out 18
CER/F/07.5
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
Certification report ANSSI-CC-2010/57
[PP0006]
Protection Profile — Secure Signature-Creation Device Type 3,
Version: 1.05, 25 July 2001. Certified by BSI (Bundesamt für Sicherheit
in der Informationstechnik) under the reference BSI-PP-0006-2002.
[PP0035]
Protection Profile, Security IC Platform Protection Profile Version 1.0
June 2007. Certified by BSI (Bundesamt für Sicherheit in der
Informationstechnik) under the reference BSI-PP-0035-2007.
[2010/02]
Certification report ANSSI-CC-2010/02, issued the 10th February 2010
for the “SA23YR48/80B and SB23YR48/80B, secured microcontrollers
including the cryptographic libray NesLib v2.0 or v3.0 in SA or SB
configuration”.
[2010/02M01]
Maintenance report ANSSI-2010/02-M01, issued the 19th March 2010,
related to the ANSSI-CC-2010/02 certificate.
Page 17 out 18
Certification report ANSSI-CC-2010/57
CC IDeal Citiz SmartCard (on SB23YR48B), version 1.4.5
Annex 3. Certification references
Decree number 2002-535, 18th April 2002, modified related to the security evaluations
and certifications for information technology products and systems.
[CER/P/01] Procedure CER/P/01 - Certification of the security provided by IT
products and systems, DCSSI.
[CC]
Common Criteria for Information Technology Security Evaluation :
Part 1: Introduction and general model,
September 2006, version 3.1, revision 1, ref CCMB-2006-09-001,
Part 2: Security functional components,
September 2007, version 3.1, revision 2, ref CCMB-2007-09-002,
Part 3: Security assurance components,
September 2007, version 3.1, revision 2, ref CCMB-2007-09-003.
[CEM]
Common Methodology for Information Technology Security Evaluation :
Evaluation Methodology,
September 2007, version 3.1, revision 2, ref CCMB-2007-09-004.
[CC AP]
Common Criteria Supporting Document - Mandatory Technical
Document - Application of attack potential to smart-cards, reference
CCDB-2009-03-001 version 2.7 revision 1, March 2009
[COMP]
Common Criteria Supporting Document - Mandatory Technical
Document - Composite product evaluation for smart cards and similar
devices, reference CCDB-2007-09-001 version 1.0, revision 1, September
2007.
[CC RA]
Arrangement on the Recognition of Common criteria certificates in the
field of information Technology Security, May 2000.
[SOG-IS]
« Mutual Recognition Agreement of Information Technology Security
Evaluation Certificates », version 3.0, 8th January 2010, Management
Committee.
[REF-CRY] Cryptographic mechanisms - Rules and recommendations about the
choice and parameters sizes of cryptographic mechanisms with standard
robustness level version 1.11, 24th of October 2008, see www.ssi.gouv.fr
Page 18 out 18
CER/F/07.5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement