Blaupunkt | IVMR-1542 | Operating instructions | Blaupunkt IVMR-1542 Operating instructions

Blaupunkt IVMR-1542 Operating instructions
In Car Video
IVMR-1542
7 607 004 510
Operating and installation instructions
http://www.blaupunkt.com
DEVICE OVERVIEW
4 1
?
>
DEUTSCH
3
ENGLISH
12
=
ITALIANO
FRANÇAIS
5
@
ESPAÑOL
SVENSKA
NEDERLANDS
6
PORTUGUÊS
<
: 8
; 9 7
DANSK
A
15
IVMR_1542_gb.pmd
15
22.07.2005, 13:26 Uhr
DEVICE OVERVIEW
Ceiling-mounted monitor
1
2
3
4
5
6
Lights on the main unit
Light switch ON
Monitor latch
Vehicle interior lighting switch
Loudspeaker
Infrared receiver for IR remote
control IVRC-06
Infrared transmitter for IR
headphones IVHS-01 (accessory)
7 Control button
Increase the monitor volume /
navigate in the OSD menu
8 Control button
Decrease the monitor volume /
navigate in the OSD menu
9 On/off button for the monitor
: Control button MENU
See Instructions / OSD menu.
; Control button CH
Channel selection if the monitor is
connected to a signal controller
IVSC-3302 or IVSC-5502.
< LCD screen
= Signal cable (13 pin)
> System cable (13 pin)
? Adapter cable RCA/jack (13 pin)
@ Cable for the interior lighting
(3 pin)
Red = Electrical power supply
(+12V)
White = To the door switch
(Door open = Earth)
Black = Earth
A AUX sockets
Red RCA = Audio IN (R)
White RCA = Audio IN (L)
Yellow RCA = Video IN
16
IVMR_1542_gb.pmd
16
22.07.2005, 13:26 Uhr
J
ENGLISH
FRANÇAIS
DANSK
PORTUGUÊS
I MENU
See Instructions / OSD menu.
J Battery compartment
ITALIANO
I
NEDERLANDS
H
SVENSKA
D E F G
D POWER
On/off button for the monitor.
E TV/VIDEO
Input selector: switch between
AV1 and AV2.
F VOL • arrow button
Increase the volume for the
selected monitor.
VOL • arrow button
Decrease the volume for the
selected monitor.
G MUTE
Mute the volume of the
loudspeaker inside the monitor.
H CH • arrow button /
Channel selection if the monitor is
connected to a signal controller
IVSC-3302 or IVSC-5502.
Caution:
The way the CH / buttons
function depends on the monitor
selection, which is made using
the signal controller’s remote
control.
ESPAÑOL
IR remote control
DEUTSCH
DEVICE OVERVIEW
17
IVMR_1542_gb.pmd
17
22.07.2005, 13:26 Uhr
CONTENTS
Device overview ..................... 15
Ceiling-mounted monitor ................ 16
IR remote control ........................... 17
Contents ................................. 18
Notes for the user .................. 19
Precautionary measures ................ 19
Safety notices ........................ 20
Supplied parts ........................ 20
Installing the monitor ............. 21
Installing the monitor (mechanical) . 21
Cables .......................................... 22
Operation ............................... 23
Controlling the interior lighting
(monitor) ....................................... 23
Opening the monitor ...................... 23
Closing the monitor ....................... 23
Switching on the monitor ............... 24
OSD menu .................................... 25
IR headphones IVHS-01
(accessory) ................................... 25
Changing the light bulb ................. 26
Changing the battery in the
remote control ............................... 26
Specifcations ......................... 27
IVMR-1542 .................................... 27
18
IVMR_1542_gb.pmd
18
22.07.2005, 13:26 Uhr
Blaupunkt GmbH
Hotline
Robert-Bosch-Str. 200
31139 Hildesheim
Germany
We should like to point out that the right
to make a claim under the guarantee
could be forfeited if the device is
changed or modified in any way without
the express authorization of the
manufacturer.
Long-term operation or storage outside
the specific temperature range can lead
to a shortening of the useful life of the
LC display.
1. Positions in which it could
restrict the driver’s view.
2. Positions in which it could
become a danger to safety
(e.g. handbrake, steering wheel,
gearshift lever and airbag).
●
Only operate the device with the
recommended voltage supply of
12 V direct current.
●
Do not attempt to open or
dismantle the monitor, since you
could suffer an electric shock as a
result.
●
If the monitor’s housing is
damaged or broken, take it to your
local specialist dealer or send it in
to our customer service centre.
●
Avoid using the monitor in
environments where it is subjected
to dust, dirt or moisture.
●
Do not install the monitor in places
where it is subjected to direct
sunlight or extreme temperatures.
19
IVMR_1542_gb.pmd
19
22.07.2005, 13:26 Uhr
ENGLISH
FRANÇAIS
Do not place the monitor in the
following positions:
ITALIANO
●
NEDERLANDS
If you are the driver you must never
use the monitor during the journey
in order to avoid causing a road
accident.
SVENSKA
We provide a manufacturer guarantee
for our products bought within the
European Union. You can view the
guarantee
conditions
at
www.blaupunkt.de or ask for them
directly at:
●
ESPAÑOL
The Blaupunkt editors are constantly
working on making the operating
instructions clearer and easier to
understand. However, if you still have
any questions on how to operate the
device, please contact your dealer or
the telephone hotline for your country.
You will find the telephone number
printed at the back of this booklet.
Please observe all the warning notices,
precautionary
measures
and
maintenance tips contained in these
operating instructions so as to extend
the life of your monitor.
PORTUGUÊS
Please read these operating
instructions before using the
equipment for the first time.
Precautionary measures
DANSK
Thank you for choosing a Blaupunkt
product. We hope you enjoy using this
new piece of equipment.
DEUTSCH
NOTES FOR THE USER
NOTES FOR THE USER
Note
We recommend that you allow a
specialist workshop to carry out the
installation.
Safety notices
Please observe the following safety
notices during installation and whilst
making the connections.
SUPPLIED PARTS
Supplied parts
The monitor is supplied with all the parts
listed below. Please check that the
range of parts supplied with your device
is complete. If one of the listed parts is
missing, please contact your dealer
immediately.
●
Monitor (including mounting fixture
and screws)
- Disconnect the negative and
positive terminals of the battery.
●
Remote control IVRC-06 with
battery
- When doing so, please observe the
safety notices provided by the
vehicle manufacturer.
●
5 m long 13-pin system cable
(for signal controller IVSC-3302 or
IVSC-5502)
- Before drilling the holes necessary
for mounting the equipment and for
laying cables, please make sure
that concealed cables, the fuel tank
and fuel lines cannot be damaged
in the process!
●
Connection adapter (13-pin RCA/
jack)
●
Operating instructions
20
IVMR_1542_gb.pmd
20
22.07.2005, 13:26 Uhr
INSTALLING THE MONITOR
DEUTSCH
Installing the monitor
(mechanical)
Select a suitable position for secure
installation of the monitor:
Make sure that the device is
installed in a safe and secure
position and that it cannot become
detached in the event of an
emergency stop.
●
Do not attach the device merely to
the roof liner.
●
If you need to drill additional holes,
make sure you do not drill through
the sheet metal of the vehicle’s
roof.
●
Avoid using the monitor over a
longer period of time whilst the
engine is off in order to prevent the
battery from becoming discharged.
ENGLISH
●
FRANÇAIS
The device must not be installed in
such a way that could prevent the
other vehicle components from
functioning properly (e.g. sliding
sunroof).
ITALIANO
●
NEDERLANDS
The ability to enter and get out of
the vehicle must not be impeded.
Screws for securing the
ceiling-mounted monitor
SVENSKA
●
Screws for securing the
mounting plate
ESPAÑOL
The device must not distract the
driver or restrict the driver’s view.
DANSK
PORTUGUÊS
●
21
IVMR_1542_gb.pmd
21
22.07.2005, 13:26 Uhr
INSTALLING THE MONITOR
Cables
>
?
To avoid discharging the battery, we
recommend you use a switched
operating voltage (ignition).
Warning notice: The operating voltage
cable must be protected with at least a
1.5 A fuse.
Monitor connection (13 pin)
Adapter cable
System cable
(13 pin)
Connect the system cable (13 pin) >
to a signal controller (IVSC-3302 or
IVSC-5502). (The voltage supply is
provided by these devices. Operating
instructions are supplied with the
devices).
Or
Signal cable
(monitor housing) (13 pin)
=
Cable for the
interior lighting
(3 pin)
@
Use the plug-in adapter cable ? to
connect to the 12 V supply voltage and
an external video/DVD device:
Red
= ACC+12V
Yellow
= +12 V direct current
Black
= Earth
Red RCA
= Audio IN (R)
White RCA
= Audio IN (L)
Yellow RCA = Video IN
Jack (blue)
= Infrared loop-through
for connection to the
IR-sensor input of
DVD-ME2 / DVD-ME3.
Attention: To be used only in conjunction
with DVD-MEx series products!
Interior lighting connection (3 pin)
Red
White
Black
= Operating voltage (+12 V)
= To the door switch
(Door open = Earth)
= Earth
22
IVMR_1542_gb.pmd
22
22.07.2005, 13:26 Uhr
ON
:
This button is used to switch the lights
on/off.
Interior lighting
:
If activated, the lights only come on
when the vehicle’s doors are opened.
➮ To watch television, lower the
monitor until it is at an angle of
approx. 90° to the monitor’s base
unit.
3
4
Closing the monitor
➮ Push the monitor back into its main
DANSK
PORTUGUÊS
unit so that it clips back into the
releasing/locking mechanism.
ESPAÑOL
SVENSKA
NEDERLANDS
ITALIANO
2
3 to flip down the LCD display.
ENGLISH
There are two switches for the lights:
2 and interior lighting
4.
ON
Opening the monitor
➮ Pull back the monitor release latch
FRANÇAIS
Controlling the interior lighting
(monitor)
DEUTSCH
OPERATION
23
IVMR_1542_gb.pmd
23
22.07.2005, 13:26 Uhr
OPERATION
Switching on the monitor
Press the power-on button 9 on the
main unit or the button D on the remote
control to switch the monitor on/off.
Note:
The button 9 lights up blue before the
monitor is switched on. This means that
the monitor is connected to the 12 V
voltage supply.
: 8
; 9 7
D E F G
H
I
J
24
IVMR_1542_gb.pmd
24
22.07.2005, 13:26 Uhr
OSD menu
●
Operation
➮ Press the MENU button : on the
TV/VIDEO (AUX):
Switching to TV or VIDEO (AUX)
●
ZOOM (picture size)
Change the picture height/width
CONTRAST:
To adjust the contrast
●
COLOR:
To adjust the colour
●
TINT:
To adjust the picture shade (only
for NTSC)
●
SHARPNESS (sharpness setting):
Setting the picture sharpness
●
RESET PICTURE:
To reset the configured parameters
to the factory default settings.
●
EXIT:
To close the OSD menu
●
SPEAKER ON
Switch the internal loudspeaker on/
off (same function as the MUTE
button G on the remote control).
IR headphones IVHS-01
(accessory)
The IR transmitter window 6 must not
be covered up when using the IR
headphones IVHS-01 (accessory).
DANSK
The sound then continues to be
outputted over the IR headphones
IVHS-01 (accessory).
ITALIANO
the OSD menu again.
SPEAKER ON
TV/VIDEO
ZOOM
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
RESET - PICTURE
EXIT
ENGLISH
●
FRANÇAIS
BRIGHTNESS:
To adjust the brightness
NEDERLANDS
➮ Select the “EXIT” option to close
●
SVENSKA
Use the arrow buttons 7 / 8 or
I / to select the options. After
you press the MENU button : or
I you can use the arrow buttons
to change the settings.
ESPAÑOL
●
- FULL
- NORMAL
- WIDE
PORTUGUÊS
display or the MENU button I on
the remote control to open the
OSD menu.
DEUTSCH
OPERATION
25
IVMR_1542_gb.pmd
25
22.07.2005, 13:26 Uhr
OPERATION
Changing the light bulb
➮ Detach the monitor from the ceiling
plate (4 screws).
Light bulb specifications
Diameter: 8 mm
Length:
28 mm
Voltage:
12 V, 3 W
Changing the battery in the
remote control
➮ Push the button on the battery
compartment J to the right (see A
below).
➮ Pull the battery compartment J
Screws for securing the
ceiling-mounted monitor
out of the remote control (see B
below).
➮ Change the 3 V battery (CR 2025).
➮ Remove the 8 screws from the
rear.
➮ Carefully lift off the rear wall.
➮ Take out the old bulb (see picture
below).
➮ Fit a new bulb (12 V, 3 W).
➮ Refit the monitor.
A
B
J
Bulb
26
IVMR_1542_gb.pmd
26
22.07.2005, 13:26 Uhr
SPECIFICATIONS
1280 (H) x 3 (RGB) x 800(V)
Active area:
331,02 (H) x 207,0 (V)
Signal system:
Dual system NTSC/PAL
Brightness:
220 cd/m2
Contrast ratio:
400:1
Viewing angle:
Left/right: 70/70 degrees
Up/down: 60/60 degrees
Video input level:
1.0 Vpp ± 10 %
Audio input level:
0.3 Vrms
Carrier frequency for IR sensor:
L-CH: 2.3 MHz
R-CH: 2.8 MHz
Operating voltage (direct current):
10-16V
Current consumption: IVMR “On”
1,0 A (at +12V)
Current consumption: IVMR “Off”
105 mA (at +12V)
ENGLISH
Screen resolution:
FRANÇAIS
15,4" Monitor
SVENSKA
NEDERLANDS
ITALIANO
Screen size:
DEUTSCH
IVMR-1542
15 uA (at +12 V)
Operating temperature:
0 - 50 °C
Storage temperature:
- 40°C to +85°C
Dimensions:
443 x 356 x 60 mm
Weight:
≤ 3350 g
DANSK
PORTUGUÊS
“Ignition off”
ESPAÑOL
Quiescent current consumption:
Subject to changes!
27
IVMR_1542_gb.pmd
27
22.07.2005, 13:26 Uhr
Service-Nummern / Service numbers / Numéros du service aprèsvente / Numeri del servizio di assistenza / Servicenummers /
Telefonnummer för service / Números de servicio / Números de
serviço / Servicenumre
Country:
Phone:
Fax:
Germany
(D)
0180-5000225
05121-49 4002
Austria
Belgium
Denmark
Finland
France
Great Britain
Greece
Ireland
Italy
Luxembourg
Netherlands
Norway
Portugal
Spain
Sweden
Switzerland
(A)
(B)
(DK)
(FIN)
(F)
(GB)
(GR)
(IRL)
(I)
(L)
(NL)
(N)
(P)
(E)
(S)
(CH)
01-610 39 0
02-525 5444
44 898 360
09-435 991
01-4010 7007
01-89583 8880
210 94 27 337
01-46 66 700
02-369 6331
40 4078
0800 400 1010
66-817 000
2185 00144
902 52 77 70
08-7501850
01-8471644
01-610 393 91
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
210 94 12 711
01-46 66 706
02-369 62464
40 2085
0800 400 1040
66-817 157
2185 00165
91 410 4078
08-7501810
01-8471650
Czech. Rep.
Hungary
Poland
(CZ)
(H)
(PL)
02-6130 0446
76 511 803
0800-118922
02-6130 0514
76 511 809
022-8771260
Turkey
(TR)
0212-335 06 71
0212-3460040
USA
(USA)
800-2662528
708-6817188
Brasil
(Mercosur)
(BR)
0800 7045446
+55-19 3745 2773
Malaysia
(Asia Pacific)
(MAL)
+604-6382 474
+604-6413 640
Blaupunkt GmbH
Robert-Bosch-Str. 200
D-31139 Hildesheim
07/05
CM/ASA2 - 8 622 404 487
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising