Advantech | Data Acquisition Modules ADAM 4000 | 13 Remote DA&C Modules ADAM-4000 Series

13 Remote DA&C Modules ADAM-4000 Series
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Remote DA&C Modules
ADAM-4000 Series
13
ADAM-4000 Series
Remote Data Acquisition and Control Modules Overview
13-2
ADAM-4000 Series
Modbus I/O Solution
13-4
ADAMView
Data Acquisition Software
13-5
ADAM-4000 Series
Total Solution for Analog and Digital I/O
13-6
ADAM-4000 Series
Modules Selection Chart
13-8
ADAM-4000 Series
Communication Modules Selection Guide
13-9
ADAM-4000 Series
I/O Modules Selection Guide
13-10
Selection Guide
Communication & Controller Modules Specifications
ADAM-4501/TCP (new)
Ethernet-enabled Communication Controller with 8 Digital I/O
13-12
ADAM-4500
PC-based Communication Controller
13-14
ADAM-4570
2-port RS-232/485/422 to Ethernet Data Gateway
13-14
ADAM-4571
1-port RS-232/485/422 to Ethernet Data Gateway
13-14
ADAM-4510/4510S
RS-422/485 Repeater
13-15
ADAM-4520
RS-232 to RS-422/485 Converter
13-15
ADAM-4521
Addressable RS-422/485 to RS-232 Converter
13-15
ADAM-4522
Isolated RS-232 to RS-422/485 Converter
13-16
ADAM-4541
Multi-mode Fiber Optic to RS-232/422/485 Converter
13-16
ADAM-4542+
Single-mode Fiber Optic to RS-232/422/485 Converter
13-16
I/O Modules Specifications
Analog Input
ADAM-4011/4011D
Thermocouple Input Module / with LED Display
13-17
ADAM-4012
Analog Input Module (mV, V, mA)
13-17
ADAM-4013
RTD Input Module (Pt or Ni RTD)
13-17
ADAM-4015
6-channel RTD Module with Modbus®
13-18
ADAM-4015T
6-channel Thermistor Module with Modbus®
13-18
ADAM-4016
Analog Input/Output Module
13-18
ADAM-4017/4017+
8-channel Analog Input Module with Modbus®
13-19
ADAM-4018/4018+
8-channel Thermocouple Input Module with Modbus®
13-19
ADAM-4018M
8-channel Analog Input Data Logger
13-19
ADAM-4019+ (new)
8-channel Universal Analog Input Module
13-20
ADAM-4021
Analog Output Module
13-20
ADAM-4022T
Serial-based Dual-loop PID Controller
13-20
ADAM-4024
4-channel Analog Output Module with Modbus®
13-21
ADAM-4050
15-channel Digital I/O Module
13-21
ADAM-4051
16-channel Isolated Digital Input with LED Module and Modbus®
13-21
ADAM-4052
8-channel Isolated Digital Input Module
13-22
ADAM-4053
16-channel Digital Input Module
13-22
ADAM-4055
16-channel Isolated Digital I/O w/LED Module
13-22
ADAM-4056S/SO
12-channel Sink/Source Type Isolation Digital Output Module
13-23
ADAM-4060
4-channel Relay Output Module
13-23
ADAM-4068
8-channel Relay Output Module
13-23
ADAM-4069(new)
8-channel Power Relay Output Module
13-24
ADAM-4080/4080D
2-channel Counter/Frequency Module / with LED Display
13-24
ADAM-4914V
4-channel Voltage Input Surge Protection Module
13-24
ADAM-4950-ENC
IP66 Industrial Enclosure for ADAM-4000
13-25
Analog Output
Digital I/O
Counter/Frequency
ADAM-4000 Series Common Specifications
13-26
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
13-2
ADAM-4000 Series
Applications
 Remote data acquisition
 Process monitoring
 Industrial process control
 Energy management
 Supervisory control
 Security systems
 Laboratory automation
 Building automation
 Product testing
 Direct digital control
 Relay control
Introduction
The ADAM-4000 series modules are compact, versatile
sensor-to-computer interface units designed specifically
for reliable operation in harsh environments. Their
built-in microprocessors, encased in rugged industrial
grade plastic, independently provide intelligent signal
conditioning, analog I/O, digital I/O, data display and
RS-485 communication.
Remotely Programmable Input Ranges
Alternative Standalone Control Solution
The ADAM-4000 series modules stand out because of
their ability to accommodate multiple types and ranges
of analog input. The type and range can be remotely
selected by issuing commands from a host computer.
One type of module satisfies many different tasks, which
greatly simplifies design and maintenance. A single kind
of module can handle the measurement needs of a whole
plant. Since all modules are remotely configured by the
host computer, physical adjustments are unnecessary.
A stand-alone control solution is made possible when
the ADAM-4000 series modules are controlled by the
ADAM-4500 or ADAM-4501 PC-based communication
controller. The ADAM-4500 or ADAM-4501 allows
users to download an application (written in a high-level
programming language) into its Flash ROM. This allows
customization for your applications.
Modular Industrial Design
A watchdog timer supervisory function will automatically
reset the ADAM-4000 series modules if required, which
reduces the need for maintenance.
You can easily mount modules on a DIN-rail, a panel or
modules can piggyback on top of each other. You make
signal connections through plug-in screw-terminal
blocks, ensuring simple installation, modification and
maintenance.
Flexible Networking
Ready for the Industrial Environment
The ADAM-4000 series modules need just two wires to
communicate with their controlling host computer over a
multidrop RS-485 network. Their ASCII-based command/
response protocol ensures compatibility with virtually any
computer system.
The ADAM-4000 series modules accept any unregulated
power source between +10 and +30 VDC. They are protected
from accidental power supply reversals and can be safely
connected or disconnected without disturbing a running
network.
Watchdog Timer Inside
Class I, Div. 2 Groups ABCD
(NI / I / 2 / ABCD / T*)
Remote DA&C Modules
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Remote Data Acquisition and Control Modules
ADAM-4000 Remote
DA&C System
The ADAM-4000 remote DA&C system encompasses a full
product line integrating HMI platforms and numerous I/O
modules such as DI/O, AI/O, relay and counter modules.
In addition, we offer many communication models for data
transfer: Ethernet wireless, Modbus, RS-485, and fiber
optics. Users can choose among specific modes according
to their specific application purposes. Data transfer can be
uploaded to HMI platforms via a safe Ethernet channel for
monitoring and controlling. All this can be done using an
existing data bus without investing in extra hardware.
Modbus Communication
Protocol
Since Modbus® is one of the most popular communication
standards in the world, Advantech has applied it as the
major communication protocol for eAutomation product
development. The new-generation ADAM-4000 modules
now also support the Modbus/RTU protocol as the
remote data transmission mechanism. These modules
(ADAM-4015/4017+/4018+/4019+/4024/4051/4055/40
56S/4056SO/4068/4069), include analog I/O and digital
I/O, needed in a data acquisition system. Featuring the
Modbus-support capacity, the new ADAM-4000 series
becomes universal remote I/O modules, which work with
any Modbus systems. The HMI server or controller can
read/write data via standard Modbus command instead of
complex ASCII code.
Ethernet
ADAM-4570 and ADAM-4571 are designed for the
connection between serial devices (RS-232/485/422)
and Ethernet. With ADAM-4570 or ADAM-4571, you can
use graphical control software to monitor and control
I/O modules. With existing devices, you can connect to
an Ethernet network with the benefits of enhanced host
performance and convenience.
RS-485
The ADAM-4000 series of modules use the EIA RS-485
communication protocol, the industry’s most widely used
bi-directional, balanced transmission line standard. The
EIA RS-485 was specifically developed for industrial
applications. It lets ADAM-4000 modules transmit and
receive data at high rates over long distances. All modules
use optical isolators to prevent ground loop problems and
reduce damages caused by power surges.
GSM Communication
Module
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Software
The ADAM-4581 1-port GSM to RS-232/485 Wireless Data
Gateway product provides GSM CSD data communication IPPC
as well as SMS service through the interface with the Dualband GSM (900/1800) module for applications in facility
management systems, water/wastewater monitoring,
TPC
pipeline monitoring, unmanned telecommunication
facility monitoring, surveillance, as well as others. The
ADAM-4581’s interface uses the industrial device standard
FPM
RS-232/485 with auto-flow control.
ATM & AWS
DA&C
Fiber Optics
cPCI
If users need to transmit over long distances without noise
interference, ADAM-4541 and ADAM-4542+ are designed
for this task. The ADAM-4541 is a multi-mode converter,
which carries signals from fiber optics to RS-232/485. It
offers a transmission distance of up to 2500 m with a total
immunity to electromagnetic noise.
ADAM-3000
Motion Control
ICOM
eConnectivity
UNO
ADAM-4000
ADAM-5000
ADAM-6000
ADAM-8000
BAS
Online Download www.advantech.com/products
All product specifications are subject to change without notice
Last updated : January 2005
13-3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
13-4
ADAM-4000 Series
Modbus I/O Solution
Dual Protocol Support
To satisfy both current ADAM users and Modbus users, these ADAM-4000 Modules
support both the ADAM protocol and Modbus/RTU protocol. You can select the
communication mode you want through the Windows Utility Software. If users apply the
ADAM protocol, the ASCII command/response will remain the same as usual. In RTU
mode, data is sent as two four-bit, hexadecimal characters, providing for higher throughput
than in ASCII mode for the same baud rate.
Complete I/O Series
We are proud to offer a complete I/O series, which includes Analog Input (ADAM-4017+/
ADAM-4019+), T/C Input (ADAM-4018+), RTD Input (ADAM-4015), Analog Output
(ADAM-4024), Digital Input/Output (ADAM-4051/4055/4056S/4056SO), and Relay
Output (ADAM-4068/4069) Modules.
Robust Design
The Advanced I/O Solution for any
Modbus System Integration
The ADAM-ADAM/4015/4017+/ADAM-4018+/ADAM-4019+/4024 are designed with
Channel differential, 3000VDC system isolation. Moreover, ADAM-4017+/4018+/4019+
offer 4~20 mA input range without the use of an additional resistor. The ADAM4051/4055/4056S/4056SO, built with 2500VDC isolation, are a robust & high density
DI/O solutions.
Intelligent Function
Introduction
The ADAM-4000 Series is a complete I/O solution, featuring Modbus Network Support,
with a robust and intelligent design. It is the easiest to use, and a cost-effective choice
for your system I/O needs.
Modbus Network Support
The Modbus® protocol has become a de facto standard for data exchange and information
communication in industrial network applications. The Modbus® devices communicate
over a serial network in a master/slave (request/response) type relationship using one of
two transmission modes: ASCII (American Standard Code for Information Interchange)
mode or RTU (Remote Terminal Unit) mode. The ADAM-4000 Modbus I/O modules are
designed to operate as slave devices on a Modbus network, which communicates in
Modbus/RTU transmission mode.
Easy Plug-in System Integration
With the ADAM-4000 Modbus I/O Built-in Modbus/RTU protocol, any controller bearing
Modbus/RTU standard can be integrated as part of a control system. Any Modbus
Ethernet data gateway can upgrade these I/O Modules up to the Modbus/TCP Ethernet
layer. Most HMI software are bundled with a Modbus driver, and can access the ADAM4000 I/O directly. Moreover, Advantech provides Modbus OPC Server & Modbus/TCP
OPC Server as data exchange interfaces between the ADAM-4000 Modbus I/O and any
Windows Applications.
Different from other ADAM AI/O modules, the ADAM-4015/4017+/4018+/4019+/4024+
can be set in different ranges, and in different channels. The ADAM-4015/4018+/4019+
are even designed with a burned-out diagnostic function to inform users of problems
with wire openings. When the alarm triggers, the ADAM-4024 provides 4 alarm DI points
to interlock with individual AO channels. The intelligent function consists of the built-in
LED indicator. From the front panel of the ADAM-4051/4055/4056S/4056SO/4068, users
ADAM
4572
Modbus/TCP
Modbus Ethernet
Data Gateway
Modbus/RTU
Modbus
Controller
HMI Server
(Modbus/RTU)
ADAM
ADAM-4000
Modbus I/O
Remote DA&C Modules
All product specifications are subject to change without notice
Last updated : January 2005
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
ADAMView
Data Acquisition Software
Modularized and Prioritized Task
Design
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Software
ADAMView development environment allows you to decompose your system into several
smaller modules or tasks. The modular design is very useful to develop, and facilitate IPPC
large and complicated system maintenance. Each module or task has its own properties,
such as scan rate, start/stop method, and priority etc. With 32-bit Windows’ multi-tasking
capability, all tasks run simultaneously. Moreover, ADAMView software allows you to
TPC
prioritize your tasks to increase overall performance.
Powerful BasicScript Scripting
Language to Customize Your Needs
FPM
ADAMView is easy to use. It fully integrates BasicScript language in its kernel to meet
your specific needs. Over 600 commands are available to perform almost any function ATM & AWS
you can imagine, including calculations, reading and writing files, DDE, and ODBC. It
allows you to access and share data with other applications, such as Microsoft Access
and Microsoft Excel. With BasicScript scripting language, you can reuse existing code DA&C
and build your applications faster and easier.
Plug-and-Play Connect with ADAM
I/O series
The Operation Interface Software
designed for ADAM
We have noticed that many users apply the ADAM Data Acquisition modules in small
base projects. Because the cost ran higher than system hardware, Human Machine
Interface software were never suitable for these projects. ADAMView, the ADAM Data
Acquisition software, is especially designed for low-volume ADAM projects. It provides
a 150 physical points database, ADAM Drivers, and OPC Server for all monitoring and
control functions. In brief, ADAMView is a cost-effective and simple SCADA software for
the ADAM I/O series.
Complete Software Package
Once you install the ADAMView software, you can immediately connect with ADAM- ADAM-3000
4000/5000 I/O as a complete Data Acquisition System. Current ADAM users can apply
direct driver to access all ADAM-4000 modules and ADAM-5000/485 I/O system. Modbus
users can link ADAM-5511, ADAM-4000 Modbus I/O, and ADAM-6000 through the
Motion Control
Modbus OPC server and Modbus/TCP OPC Server.
Hardware Supported
 ADAM-4000/5000 Series Modules: Link through DLL Driver (Device Manager)
 ADAM-4000 Modbus Series Modules: Link through Modbus® OPC Server
ADAMView takes advantage of Microsoft’s Windows graphical interface, offering fast and
intuitive configuration for human-machine interface and data acquisition applications. This
application software combines easy-to-use graphical development and the flexibility of
BasicScript, a powerful programming tool. With ADAMView, you can easily design both
simple and complex applications, such as factory processes and utility monitoring, Lab
testing, or environmental monitoring.
Graphical Panel Configuration
ADAMView provides a wide variety of graphical wizards, allowing users to quickly
create an intuitive operator interface. Built-in display objects include bar graph, button,
indicator, real time/historical trending, knob, gauge, slider, imported bitmap, numeric
display and control.
cPCI
 ADAM-5511 Modbus Controller: Link through Modbus® OPC Server
 ADAM-5000/TCP, ADAM-6000 I/O Modules: Link through Modbus/TCP OPC
Server
 ADAM-4501 Controller: Link through Modbus/TCP OPC Server
 ADAM-5510 Series Controller: Link through Modbus® OPC Server
 ADAM-5510KW Series Controller: Link through Modbus® OPC Server
Ordering Information




PCLS-ADAMVIEW32
PCLS-OPC/ADM
PCLS-OPC/MOD
PCLS-OPC/MTP
ADAMView Data Acquisition Software
OPC Server for ADAM-4000/5000 Series (RS-485)
Modbus® OPC Server
Modbus®/TCP OPC Server
ICOM
eConnectivity
UNO
ADAM-4000
ADAM-5000
ADAM-6000
ADAM-8000
BAS
Online Download www.advantech.com/products
All product specifications are subject to change without notice
Last updated : January 2005
13-5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
13-6
ADAM-4000 Series
Analog Input Modules
The ADAM-4000 series of analog input modules use
microprocessor-controlled, high-resolution, 16-bit,
sigma-delta A/D converters to acquire sensor signals such
as voltage, current, thermocouple or RTD. They translate
analog data into one of the following formats: engineering
units, % of FSR, two’s complement or ohms. After the
modules receive a request from the host, the data is sent
in the desired format over the RS-485 network.
The ADAM 4000 series analog input modules protect
your equipment from ground loops by providing 3000
VDC isolation.
The ADAM-4011/4011D/4012 modules feature digital
inputs and outputs which may be used for alarms and
event counting.
The analog input module’s two digital output channels are
open-collector transistor switches that you can control
from the host computer. By switching solid state relays,
the output channels can control heaters, pumps and other
power equipment. The module can use its digital input
channel to sense the state of a remote digital signal.
Analog Input/Output
Modules
Analog Input Module
with LED Display
The ADAM-4016 is an analog input/output module with
3000 VDC isolation for load cell and stress measurement.
It accepts voltage and current input signals. The module
includes two digital outputs for programmable alarm
output and another two digital outputs for individual use.
This enables the ADAM-4016 to control a device's on/off
control independently of a host PC.
The 4½ -digit LED display on the face of the ADAM-4011D
lets you monitor process readings right at their source. The
module displays readings in a wide variety of data formats
as well as high-low alarm messages. The ADAM-4011D
offers flexibility, ease of installation and direct availability
of process data. This module is the ideal choice for critical
process monitoring.
Eight-channel Analog
Input Modules
Eight-channel Analog
Input Data Logger
The ADAM-4017+/4018+/4019+ are 16-bit, 8-channel
analog input modules that provide programmable input
ranges on all channels. These modules are an extremely
cost-effective solution for industrial measurement and
monitoring applications. 3000 VDC optical isolation
between the analog input and the modules protects the
modules and peripherals from damages caused by high
input-line voltages.
The ADAM-4018M features six differential and two
single-ended channels. Its 128 KB of Flash memory
can accommodate up to about 38,000 data samples and
will write until the memory is exhausted. Featuring a
remotely configurable sampling interval of 2 seconds to
18 hours, the ADAM-4018M is the perfect link between
industrial processes and your PC, enabling remote process
monitoring from virtually any kind of computer.
Programmable Alarm Output
Analog input modules include high and low alarm signals
with remotely configurable limit values. After every A/D
conversion, the digital value is compared with the high
and low limit. The module can change the state of a
digital output depending on the result of this comparison.
This allows the on/off control of a device to perform
independently of its host PC.
Event Counter
The onboard event counter can count up to 65,535
transitions occurring on the digital input. The counter
can be read and cleared by the host computer. The counter
can be used in production line applications to record
repetitive operations.
Block Diagram of the ADAM-4011 Analog Input Module
Remote DA&C Modules
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Analog and Digital I/O Total Solution
RTD Input Modules
An RTD module is popular for temperature measurement.
Unlike traditional designs, the ADAM-4015 provides six
RTD input channels for different types of RTD signals
as a cost-effective solution for industrial and building
automation. Occasionally, broken external wiring can lead
to inaccurate current values. The ADAM-4015 provides
a broken wiring detection function so users can easily
troubleshoot this.
Analog Output Modules
The ADAM-4021 analog output module supplies
single-channel analog output in a range of
voltages and currents. In order to fully fit
multi-channel analog output modules, the ADAM-4024
provides 4 universal type output channels. Moreover, it is
designed with 4 digital inputs for integrating applications,
such as emergency latch outputs or users default triggers.
It uses optical isolators to prevent ground loop effects and
limit damage from power surges. You can specify slew
rates and start-up currents.
Analog Readback (ADAM-4021 Only)
The analog output module's ADC (Analog to Digital
Converter) is independent of the DAC, so it provides true
readback of the analog output signal to the microprocessor.
While the ADC is not intended to provide highly accurate
measurement of the output data, it indicates that analog
output is being produced as intended. It also lets you easily
detect output fault conditions due to improper wiring or
unexpected loads.
Digital Input and
Output Modules
The ADAM-4050 features seven digital input channels
and eight digital output channels. The outputs are
open-collector transistor switches that you can control
from the host computer. You can also use the switches
to control solid-state relays, which in turn can control
heaters, pumps or other power equipment. The host
computer can use the module's digital inputs to determine
the state of limit switches, safety switches or remote
digital signals.
The ADAM-4051 is a 16-ch. digital input module, built
with 3000 VDC optical isolation, suitable for critical
applications. Different from other modules, the ADAM4051 accepts 10 ~ 50 V input voltage to fit various digital
signals, such as 12 VDC, 24 VDC, 48 VDC. Moreover, users
can read the current status from the LED indicators on
the front panel.
damage from power surges on the input lines.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
The ADAM-4053 provides 16 digital input channels for dry
or wet contact signals signals. For dry contact, the effective
distance from DI to contact point is up to 500 m.
Software
The ADAM-4055 offers 8-ch. isolated digital inputs and
8-ch. isolated digital outputs for critical applications. The
inputs accept 10 ~ 50 V voltage, and the outputs supply
5 ~ 40 VDC open collector. Considered to be very userfriendly, the ADAM-4055 is also built with LED indicator
for easy status reading.
IPPC
Counter/Frequency
Module
TPC
DIN-rail Mounting
Streamline your system with industry standard
DIN-rails
ATM & AWS
The ADAM-4080/4080D isolated counter/frequency
modules have two 32-bit counter channels and a built-in
programmable timer for frequency measurement.
DA&C
Programmable Alarm Output
The ADAM-4080/4080D modules include digital alarm
functions. You can set alarm values (32-bit) into the module
from your host computer.
cPCI
Programmable Digital Filter and Threshold
The ADAM-4080/4080D modules include a unique
programmable digital filter to reject noise on the input
signal. You can specify separate time constants to provide
stable output readings.
ADAM-3000
Panel/Wall Mounting
Use this special bracket to mount modules on
any flat surface
Programmable Preset Value
eConnectivity
Front Panel Display
The ADAM-4080D module's 5-digit LED displays the
data being sent over an RS-485 line to the host computer.
The module can be programmed to show either channel
0 or channel 1.
As with other ADAM modules, the ADAM-4060/4068 relay
modules are controlled remotely and store configuration
data in EEPROM. The ADAM-4060/4068 provide 4/8
channels, half being Form A and the rest being Form
C. These modules are excellent for on/off control or
low-power switching applications.
Motion Control
ICOM
The ADAM-4080 module includes a programmable
preset mode. You can preset the value of a counter into
the module from your host computer.
Relay Output Modules
FPM
UNO
Piggybacking
Save space by stacking the modules, one on top
of the other
ADAM-4000
ADAM-5000
ADAM-6000
ADAM-8000
The ADAM-4052 provides eight digital input channels:
six fully independent isolated channels and two isolated
channels with a common ground. All have 5000 VRMS
isolation to prevent ground loop effects and prevent
BAS
Plug-in Terminal Block
Save time by leaving wiring intact while
connecting or disconnecting modules
Online Download www.advantech.com/products
All product specifications are subject to change without notice
Last updated : January 2005
13-7
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
13-8
ADAM-4000 Series
Controllers
Module
Selection Chart
4500 PC-based Communication Controller (P.13-14)
4501 Ethernet-enabled Communication Controller with
8 Digital I/O (P.13-12)
4022T Serial based Dual Loop PID Controller (P.13-20)
Ethernet
4570 2-port Ethernet Data Gateway (P.13-14)
4571 1-port Ethernet Data Gateway (P.13-14)
Serial
4510 RS-422/485 Repeater (P.13-15)
4510S Isolated RS-422/485 Repeater (P.13-15)
4520 Isolated RS-232 to RS-422/485 Converter (P.13-15)
4521 RS-422/485 to RS-232 Converter (P.13-15)
Communication
Modules
4522 RS-232 to RS-422/485 Converter (P.13-16)
4531 Modbus/RTU to BACnet MS/TP Converter
Fiber Optic
4541 Multi-Mode Fiber Optic to Serial Converter (P.13-16)
4542+ Single Mode Fiber Optic to Serial Converter (P.13-16)
Wireless
Digital Input
4581 Wireless GSM Module
4051 Isolated DI Module (P.13-21)
4052 Isolated DI Module (P.13-22)
4053 Digital Input Module (P.13-22)
Digital Output
4060/4068 Relay Output Module (P.13-23)
4069 Power Relay Output Module (P.13-24)
4056S/4056SO 12-channel Sink/Source Type Digital Output
Module (P.13-23)
Analog Input
4012 Analog Input Module (P.13-17)
4017/4017+ 8-channel Analog Input Module (P.13-19)
4011 T/C Input Module (P.13-17)
4011D T/C Input Module with Display (P.13-17)
I/O Modules
4018/4018+ 8-channel T/C Input Module (P.13-19)
4018M Analog Input Data Logger (P.13-19)
4019+ 8-channel Universal AI Module (P.13-20)
4013 RTD Input Module (P.13-17)
4015 6-channel RTD Input Module (P.13-18)
4015T 6-channel Thermistor Input Module (P.13-18)
Analog Output
4021 Analog Output Module (P.13-20)
4024 4-channel Analog Output Module (P.13-21)
Counter
4080 Counter/Frequency Module (P.13-24)
4080D Counter/Frequency Module (P.13-24)
Mixed I/O
4016 Analog I/O Module (P.13-18)
4050 Digital I/O Module (P.13-21)
4055 Isolated Digital I/O Module (P.13-22)
Accessory
Remote DA&C Modules
4914V 4-channel Voltage Input Surge Protection
Module (P.13-24)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Communication Modules Selection Guide
Controllers
Repeaters
Converters & Data Gateways
Module
ADAM-4500
ADAM-4501
ADAM-4022T
ADAM-4510
ADAM-4510S
Network
RS-232
RS-485
Ethernet, RS-485
RS-485
RS-422
RS-485
Comm. Protocol
ADAM
Modbus/RTU,
Modbus/TCP
ADAM/Modbus
Comm. Speed (bps)
From 1200 to
115.2 k
Ethernet: 10/100M
Serial: From 1200
to 115.2 kbps
From 1200 to
115.2 k
From 1200 to
115.2 k
From 1200 to
115.2 k
From 1200 to
115.2 k
From 1200 to
115.2 k
Comm. Distance
Serial: 1.2 km
Ethernet: 100 m
Serial: 1.2 Km
Serial: 1.2 km
Serial: 1.2 km
Serial: 1.2 km
Serial: 1.2 km
ADAM-4541: 2.5 km
ADAM-4542+:
15 km
RS-232: female
DB9 RS-485:
Interface Connectors
plug-in screw
terminal
Ehternet: RJ45
RS-485: plug-in
screw terminal
RS-232:RJ48
RS-485: plug-in
screw terminal
RS-422/485:
plug-in screw
terminal
RS-232: female
DB9
RS-422/485:
plug-in screw
terminal
RS-232: female
DB9
RS-422/485:
plug-in screw
terminal
Fiber: ST
RS-232/422/485:
plug-in screw
terminal
RS-232/485:
plug-in screw
terminal
Ethernet: RJ-45
RS-232/422/485:
RJ-48
Power
Comm. & Power
Comm. & Power
Comm. & Power
Comm. & Power
Comm. & Power
Network: Tx/Rx
Link, Speed, Power
LED Indicators
Comm. & Power Comm. & Power
ADAM-4520
ADAM-4522
ADAM-4521
ADAM4541/4542+
RS-232 to RS-422 RS-232 to RS-422 Fiber Optic to RSRS-485
RS-485
232/422/485
ADAM-4581
ADAM-4570
ADAM-4571
GSM to RS232/485
Ethernet to RS232/422/485
900/1800 Band Ethernet: 10/100 M
Serial: from 1200
Serial: up to
to 9600 bps
230.4 k
LAN: 100 m
Serial: 1.2 km
Data FlowControl
Yes
Yes
Yes
Yes
Yes
Yes
Watchdog Timer
Yes
Yes
Yes
Yes
Yes
Yes
+10 ~ +30 VDC
Isolation Voltage
3000 VDC
3000 VDC
(ADAM-4510S)
3000 VDC
(ADAM-4520)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Software
Power Requirement
+10 ~ +30 VDC
+10 ~ +30 VDC
+10 ~ +30 VDC
+10 ~ +30 VDC
+10 ~ +30 VDC
+10 ~ +30 VDC
+10 ~ +30 VDC
+10 ~ +30 VDC
Operating
Temperature
-10 ~ 70° C
-10 ~ 70° C
-10 ~ 70° C
-10 ~ 70° C
-10 ~ 70° C
-10 ~ 70° C
-10 ~ 70° C
-10 ~ 70° C
0 ~ 60° C
Humidity
5 ~ 95 %
5 ~ 95 %
5 ~ 95 %
5 ~ 95 %
5 ~ 95 %
5 ~ 95 %
5 ~ 95 %
5 ~ 95 %
20 ~ 95 %
Power Consumption
2.0 W
4W
4W
1.4 W
1.2 W
1W
1 W (typical)
1.5 W (max.)
1W
4W
Page
13-14
13-12
13-20
13-15
13-15, 13-16
13-15
13-16
13-14
IPPC
TPC
FPM
ATM & AWS
DA&C
cPCI
ADAM-3000
Motion Control
ICOM
eConnectivity
UNO
ADAM-4000
ADAM-5000
ADAM-6000
ADAM-8000
BAS
Online Download www.advantech.com/products
All product specifications are subject to change without notice
Last updated : January 2005
13-9
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
13-10
I/O Modules Selection Guide
Analog Input
Module
ADAM-4011/
ADAM-4011D
ADAM-4012
ADAM-4013
ADAM-4015
ADAM-4015T
ADAM-4016
ADAM-4017/
ADAM-4017+
Resolution
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
ADAM-4018/
ADAM-4018+
ADAM-4018M
ADAM-4019+
16 bit
16 bit
16 bit
8 differential
(ADAM-4018+)
6 differential
2 S. E.*
8 differential
Input Channels
1 differential
1 differential
1 differential
6 differential
6 differential
1 differential
8 differential
(ADAM-4017+)
Sampling Rate
10 Hz
10 Hz
10 Hz
10 Hz (total)
12 Hz (total)
10 Hz (total)
10 Hz (total)
10 Hz (total)
10 Hz (total)
10 Hz (total)
Voltage Input
±15 mV
±50 mV
±100 mV
±500 mV
±1 V
±2.5 V
±150 mV
±500 mV
±1 V
±5 V
±10 V
-
-
-
±15 mV
±50 mV
±100 mV
±500 mV
±150 mV
±500 mV
±1 V
±5 V
±10 V
±50 mV
±100 mV
±500 mV
±1 V
±2.5 V (4018)
±50 mV
±100 mV
±500 mV
±1 V
±2.5 V
± 100 mV
± 500 mV
±1V
± 2.5 V
±5V
± 10 V
Current Input
±20 mA
±20 mA
-
-
-
±20 mA
4~20 mA (4017+)
4~20 mA
±20 mA
±20 mA
4 ~ 20 mA
± 20 mA
Direct Sensor
Input
J, K, T, E, R, S, B
Thermocouple
-
RTD
Pt, Ni
RTD
Pt, Ni, Balco
Thermistor
3K, 10 K
-
-
J, K, T, E, R, S, B
Thermocouple
J, K, T, E, R, S, B
Thermocouple
J, K, T, E, R, S, B
Thermocouple
Burn-out
Detection
Yes
-
-
Yes
Yes
-
-
Yes
(4018+)
-
Yes
+4 ~ 20 mA &
All T/C
Channel
Independant
Configuration
-
-
-
Yes
Yes
-
Yes
(4017+)
Yes
(4018+)
-
Yes
Storage
Capacity
-
-
-
-
-
-
-
-
128 KB Flash
Memory
-
Output
Channels
-
-
-
-
-
1
-
-
-
-
Voltage Output
-
-
-
-
-
0 - 10 V
-
-
-
-
Current Output
-
-
-
-
-
30 mA
-
-
-
-
Digital Input
Channels
1
1
-
-
-
-
-
-
-
-
Digital Output
Channels
2
2
-
-
-
4
-
-
-
-
Isolation
3000 VDC
3000 VDC
3000 VDC
3000 VDC
3000 VDC
3000 VDC
3000 VDC
3000 VDC
3000 VDC
3000 VDC
Digital LED Indicator
Yes (4011D)
-
-
-
-
-
-
-
-
-
Yes (System)
Yes (System &
Comm.)
Yes (System &
Comm.)
Yes (System)
Yes (System &
Comm.)
Yes (System &
Comm.)
Yes (System)
Yes (System &
Comm.)
Analog Input
Analog
Output
Digital Input
and Output
Alarm Settings
Counter
(32-bit)
Channels
Input Frequency
Watchdog Timer
Yes (System)
Yes (System)
Safety Setting
Modbus Support
-
-
-
Yes
Yes
-
Yes (4017+)
Yes (4018+)
-
Yes
Page
13-17
13-17
13-17
13-18
13-18
13-18
13-19
13-19
13-19
13-20
Remote DA&C Modules
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Software
Analog Output
Digital Input/Output
Relay Output
Counter
ADAM-4021
ADAM-4024
ADAM-4050
ADAM-4051
ADAM-4052
ADAM-4053
ADAM-4056S/
ADAM-4056SO
12 bit
12 bit
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Yes
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
4
-
-
-
-
-
-
-
-
-
-
0 - 10 V
0 - 10 V
+/-10V
-
-
-
-
-
-
-
-
-
-
0 - 20 mA
4 - 20 mA
0 - 20 mA
4 - 20 mA
-
-
-
-
-
-
-
-
-
-
-
4
7
16
8
16
-
8
-
-
-
-
8
4-channel relay
8-channel relay
8-channel power
relay
2
-
-
-
-
Yes
-
-
8
-
-
-
12 (Sink): ADAM4056S
12 (Source):
ADAM-4056SO
-
Yes
-
-
-
-
-
-
-
ADAM-4055
ADAM-4060
ADAM-4068
ADAM-4069
ADAM-4080/
ADAM-4080D
-
-
-
-
-
-
2
-
-
-
-
-
-
-
-
-
-
50 kHz
3,000 VDC
3,000 VDC
-
2,500 VDC
5,000 VRMS
-
2,500 VDC
2,500 VDC
-
-
-
2,500 VRMS
-
-
Yes
Yes
-
-
-
5-digit (4080D)
(System &
Comm.)
(System &
Comm.)
(System &
Comm.)
(System &
Comm.)
Yes (System)
Yes
Yes
Yes
Yes
-
-
-
Yes
Yes (System)
Yes (System &
Comm.)
(System &
Comm.)
(System &
Comm.)
Yes (System)
Yes (System)
(System &
Comm.)
-
Yes
Yes
-
-
-
Yes
TPC
FPM
ATM & AWS
DA&C
cPCI
ADAM-3000
Motion Control
ICOM
eConnectivity
UNO
-
IPPC
-
Yes
-
Yes
-
-
Yes
Yes
-
Yes
Yes
-
13-20
13-21
13-21
13-21
13-22
13-22
13-23
13-22
13-23
13-23
13-24
13-24
ADAM-4000
ADAM-5000
ADAM-6000
ADAM-8000
BAS
Online Download www.advantech.com/products
All product specifications are subject to change without notice
Last updated : January 2005
13-11
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
13-12
ADAM-4501
Ethernet-enabled Communication
Controller with 8 Digital I/O
Features
NEW
 10/100Base-T Ethernet Interface
 Email alarm function
 Built-in Web Server
 Built-in FTP Server and Client
 Supports 4 Digital Input and 4 Digital Output
 Full Functions of Standard TCP and UDP Sockets
 Optional 4 digit 7-segment LED display
 Supports Modbus/RTU and Modbus/TCP function libraries
 1.5 MB Flash ROM/640 KB SRAM
 Four Serial Ports Available
 Integrated All Operations in Windows Utility
Introduction
The ADAM-4501 is a compact-sized Ethernet-enabled communication controller under x-86 CPU architecture. It supports not only Ethernet interface but also 4 serial ports, which
let ADAM-4501 be very suitable for industrial communication and control applications. The Ethernet-enabled features include built-in HTTP Server, FTP Server and Email Alarm
functions. The modularized I/O design provides high flexibility for versatile application requirements. ADAM-4501 also supports rich Modbus function libraries including Modbus/RTU
Master/Slave and Modbus/TCP Server/Client function libraries.
Specifications
Digital Output
 Channel
System
 CPU
 Memory








Operating System
Timer BIOS
Real-time Clock
Watchdog Timer
COM1
COM2
COM3
Programming
Port/COM4
 Status Display
 CPU Power
Consumption
16-bit microprocessor
1.5 MB flash memory:
- 256 KB system flash
- 256 KB flash memory
- 1024 KB file system, 960 KB for user applications
640 KB SRAM, up to 384 KB with battery backup
ROM-DOS(MOS-DOS)
Yes
Yes
Yes
RS-232 (Full Modem Signals)
RS-485
RS-485
RS-232/485
RS-232 Interface (TX, RX, GND)
RS-485
Power, CPU, communication and battery
4W
Digital Input
 Channel
4
Dry Contact:
Logic level : Open
Logic level 1 : Close to GND
Wet Contact:
Logic level : +2 V max.
Logic level : 4 V ~ 30 V
Remote DA&C Modules
4
Open Collector to +40 V, 200 mA max. Load
Network
 Ethernet
 RS-485
Speed: 10/100 Mbps
Speed: 1200 up to 115.2 kbps
Maximum Nodes: up to 256 multi-drop system per
serial port
Software Support
 C Library
Borland C++ 3.0 for DOS
Power
 Unregulated + 10 to + 30 VDC
 Protected against Power Reversal
Mechanical
 Case
 Plug-in Screw
Terminal Block
KJW with captive mounting hardware
Accepts 0.5 mm2 to 2.5 mm2, 1 - #12 or 2 - #14 to
#22 AWG
Environment
 Operating Temperature - 10 ~ 70° C (14 ~ 158° F)
 Storage Temperature - 25 ~ 85° C (-13 ~ 185° F)
 Humidity
5 ~ 95%, non-condensing
Ordering Information
 ADAM-4501
 ADAM-4501D
Ethernet-enabled Communication Controller with 8
Digital I/O
Ethernet-enabled Communication Controller with LED
and 8 Digital I/O
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
ADAM-4501
ADAM-4501 System Architecture
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Software
IPPC
TPC
FPM
ATM & AWS
DA&C
cPCI
ADAM-3000
Designed for Ethernet Connectivity
Compact Size and Modularized I/O Design
ADAM-4501 is designed with a 10/100 Mbps Ethernet port. The Ethernet-enabled features
include built-in HTTP Server, FTP Server, FTP Client function, Email Alarm function and
TCP/UDP connection functions. The HTTP Server will let authorized users to monitor
ADAM-4501 I/O status by Internet Explorer via Internet. The FTP Server and Client can be
used for remote maintenance. The Email Alarm function of ADAM-4501 can send email to
pre-defined users for alarm message. All features are very easy to use and ready-to-use
sample programs are available.
The ADAM-4501 modularized I/O expansion board provides high flexibility for versatile
application requirements. The compact size and modularized design let ADAM4501 can
fit to any places with limited space. Advantech will offer versatile I/O expansion modules
ICOM
in the future for different application needs.
Versatile Protocols of Communication Function Libraries
The communication protocol of the ADAM-4501 is user-defined and there are library
functions of Modbus/RTU protocol and Modbus/TCP protocol available for users. The
function libraries include following protocols.
 Modbus/RTU Master Function for connecting to remote I/O modules via RS-485
port
 Modbus/RTU Slave Function for connecting to HMI/SCADA software via RS-485
port
Motion Control
More Data Memory to Support Versatile Applications
ADAM-4501 is designed with 640 KB SRAM, 512KB flash memory and 1MB flash disk. So eConnectivity
it offers a good supply of memory for developing complex control program or data storage
applications, such as data recording, which is difficult for traditional controllers.
Supports 4 Communication Ports
UNO
Not only equips with an Ethernet interface, ADAM-4501 also has 4 RS-485 communication
ports for system networks. The COM1 features RS-232 port with full modem signals.
Both COM2 and COM3 are RS-485 ports which can connect to remote I/O modules or ADAM-4000
control devices. The COM4 is RS-232/485 selectable which is used for downloading
application program by default.
ADAM-5000
 Modbus/TCP Server Function for connecting to HMI/SCADA software via Ethernet
port
 Modbus/TCP Client Function for connecting to Ethernet-enabled remote I/O
modules via Ethernet port
ADAM-6000
ADAM-8000
BAS
Online Download www.advantech.com/products
All product specifications are subject to change without notice
Last updated : January 2005
13-13
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
13-14
ADAM-4500
ADAM-4570
ADAM-4571
ADAM-4500
 CPU
1-port Ethernet to Serial Data Gateway
 Operating System
 Timer BIOS
 SRAM
Real-time Clock
Watchdog Timer
COM1
COM2
Program Download
Port (RS-232)
Communication
 RS-232/485
Up to 115.2 kbps
Transmission Speed
 RS-232 Interface
Female DB-9
Connector
 RS-485 Interface
Plug-in screw terminal
Connector
 RS-485 Auto Flow Control
Power
 Power Requirement
 Power Consumption
ADAM-4571
Specifications
80188, 16-bit
microprocessor
256 KB (170 KB free
memory for the user)
Boot ROM-DOS
Yes
256 KB (234 KB free
memory for the user)
Yes
Yes
RS-232/485
RS-485
Tx, Rx, GND
 Flash ROM
Unregulated
+10 ~ +30 VDC
2.0 W @ 24 VDC
Ordering Information
 ADAM-4500
2-port Ethernet to Serial Data Gateway
ADAM-4570
Specifications





PC-based Communication Controller
PC-based Communication
Controller
 Protocol
 Network Ports
Specifications
TCP, UDP, IP, ARP
10Base-T (IEEE 802.3)
100Base-TX (IEEE
802.3u)
RJ-45 connector
RS-232/485/422
 Protocol
 Network Ports
TCP, UDP, IP, ARP
10Base-T (IEEE 802.3)
100Base-TX (IEEE
802.3u)
RJ-45 connector
RS-232/485/422
 Serial Port
Connector: DTE, DCE
Transmission speeds:
RS-232: 300 bps to 115.2 kbps
RS-485/422: 300 bps to 230.4 kbps
Format: parity bit: odd, even, none
Data bit: 5, 6, 7, 8
Stop bit: 1, 1.5, 2
Modem control: Full, RS-232
 Compatibility
Ethernet: version 2.0/
IEEE 802.3, IEEE 802.3u
 Diagnostic LEDs
Network: Tx/Rx, Link,
Speed (10/100 Mbps),
Power
Serial: Tx/Rx, Status
 Utility Software
Windows-based,
auto-search for device
Device Setting: name,
description, serial port
 Driver
Windows NT 4.0 driver
to redirect the standard
Win32 API
 Power Requirement
Unregulated 10~
30 VDC with protection
from power surge
 Power Consumption
4.0 W @ 24 VDC
 Case
ABS with captive
mounting hardware
 Accessories
nylon DIN-rail mounting
adapter SECC panel
mounting bracket
 Operating Temperature 0 ~ 60° C (32~140° F)
 Storage Temperature -20 ~ 80° C (-4~176° F)
 Operating Humidity
20~95%
(non-condensing)
 Storage Humidity
0~ 95%
(non-condensing)
 Serial Port
Connector: DTE, DCE
Transmission speeds:
RS-232: 300 bps to 115.2 kbps
RS-485/422: 300 bps to 230.4 kbps
Format: parity bit: odd, even, none
Data bit: 5, 6, 7, 8
Stop bit: 1, 1.5, 2
Modem control: Full, RS-232
 Compatibility
Ethernet: version 2.0/
IEEE 802.3, IEEE 802.3u
 Diagnostic LEDs
Network: Tx/Rx, Link,
Speed (10/100 Mbps),
Power
Serial: Tx/Rx, Status
 Utility Software
Windows-based,
auto-search for device
Device Setting: name,
description, serial port
 Driver
Windows NT 4.0 driver
to redirect the standard
Win32 API
 Power Requirement
Unregulated 10 to
30 VDC with protection
from power surge
 Power Consumption
4.0 W @ 24 VDC
 Case
ABS with captive
mounting hardware
 Accessories
Nylon DIN-rail mounting
adapter SECC panel
mounting bracket
 Operating Temperature 0~ 60° C (32~ 140° F)
 Storage Temperature -20~ 80° C (-4 ~176° F)
 Operating Humidity
20 ~ 95%
(non-condensing)
 Storage Humidity
0~ 95%
(non-condensing)
Ordering Information
Ordering Information
 ADAM-4570
 ADAM-4571
2-port Ethernet to RS232/422/485 Data Gateway
1-port Ethernet to RS232/422/485 Data Gateway
Remote DA&C Modules
All product specifications are subject to change without notice
Last updated : January 2005
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
ADAM-4510
ADAM-4520
ADAM-4521
RS-422/485 Repeater
Isolated RS-232 to RS-422/485 Converter
Addressable RS-422/485 to RS-232 Converter
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Software
IPPC
TPC
FPM
ADAM-4510/4510S
ADAM-4520
ADAM-4521
ATM & AWS
Specifications
 Input
 Output
 RS-422/485
Interface Connector
 Isolation Voltage
 Power Consumption
RS-485 (2-wire) or
RS-422 (4-wire)
RS-485 (2-wire) or
RS-422 (4-wire).
Speed (bps): 1200,
2400, 4800, 9600,
19.2 k, 38.4 k, 57.6 k,
115.2 k, RTS control
and RS-422 mode
(switchable)
Plug-in screw terminal
3000 VDC
(ADAM-4510S only)
1.4 W @ 24 VDC
Specifications
Specifications
 Input
RS-232 (4-wire)
 RS-232 Interface Connector
female DB-9
 Output
RS-485 (2-wire) or
RS-422 (4-wire).
Speed (bps): 1200,
2400, 4800, 9600,
19.2 k, 38.4 k, 57.6 k,
115.2 k, RTS control
and RS-422 mode
(switchable)
 RS-422/485
Plug-in screw terminal
Interface Connector
 Isolation Voltage
3000 VDC
 Power Consumption
1.2 W @ 24 VDC
 Built-in microprocessor and watchdog timer
Ordering Information
Ordering Information
 ADAM-4510
 ADAM-4510S
 ADAM-4520
RS-422/RS-485 Repeater
Isolated RS-422/RS-485
Repeater
Isolated RS-232 to RS-422/
RS-485 Converter
 RS-232 and 485 can be set to different
baudrates
 RS-485 surge protection and automatic RS485 data flow control
 Software configurable to either addressable
or non-addressable mode
 Transmission Speed
(bps)
 RS-232 Interface
Connector
 RS-422/RS-485
Interface Connector
 Power Consumption
300, 600, 1200, 2400,
4800, 9600, 19.2 k,
38.4 k, 57.6 k, 115.2 k
(software configurable)
Female DB9
Plug-in screw terminal
1.0 W @ 24 VDC
Ordering Information
 ADAM-4521
Addressable RS-422/485 to
RS-232 Converter
DA&C
cPCI
ADAM-3000
Motion Control
ICOM
eConnectivity
UNO
ADAM-4000
ADAM-5000
ADAM-6000
ADAM-8000
BAS
Online Download www.advantech.com/products
All product specifications are subject to change without notice
Last updated : January 2005
13-15
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
13-16
ADAM-4522
ADAM-4541
ADAM-4542+
RS-232 to RS-422/485 Converter
Fiber Optic to RS-232/422/485 Converter
Fiber Optic to RS-232/422/485 Converter
NEW
ADAM-4522
ADAM-4541
ADAM-4542+
Specifications
Specifications
Specifications
 Input
RS-232 (4-wire)
 RS-232 Interface Connector
Female DB-9
 Output
RS-485 (2-wire) or
RS-422 (4-wire).
Speed (bps): 1200,
2400, 4800, 9600,
19.2 k, 38.4 k, 57.6 k,
115.2 k, RTS control
and RS-422 mode
(switchable)
 RS-422/485 Interface Plug-in screw terminal
Connector
 Power Consumption
1.2 W
Communication
Communication
 Fiber Optic Input or Output
 RS-232/422/485 Output 1200, 2400, 4800,
9600, 19.2 k, 38.4 k,
Transmission Speed
(bps)
57.6 k, 115.2 k and
RS-232/422 mode
(switchable)
 Communication Mode Asynchronous
 Transmission Mode
Full/half duplex,
bidirectional
 RS-232/422/485
Plug-in screw terminal
Interface Connector
 Fiber Connector
ST
 Fiber Optic Input or Output
 RS-232/422/485 Output 1200, 2400, 4800,
9600, 19.2 k, 38.4 k,
Transmission Speed
(bps)
57.6 k, 115.2 k
 Communication Mode Asynchronous
 Transmission Mode
Full/half duplex,
bidirectional
 RS-232/422/485
Plug-in screw terminal
Interface Connector
 Fiber Connector
SC
Ordering Information
ADAM-4541
 ADAM-4522
RS-232 to RS-422/485
Converter
 Transmission Distance
 Optical Power Budget
(attenuation)
 Fiber Optical Type
 Wavelength
2.5 km
12.5 db (measured with
62.5/125 mm)
Multimode
820 nm
 Transmission Distance: 15 km
 Optical Power Budget
(attenuation)
 Fiber Optical Type
 Wavelength
 Power Requirement
 Power Consumption
Unregulated +10 ~
+30 VDC
1 W (typical)
1.5 W (max)
Ordering Information
Fiber Optics to RS-232/422
Converter
9 dB
Singlemode
1310 nm
Power
 Power Requirement
Power
 ADAM-4541
ADAM-4542+
 Power Consumption
Unregulated
+10 ~ +30 VDC
1 W (typical)
1.5 W (max)
Ordering Information
 ADAM-4542+
Single-mode Fiber Optics to
Serial Converter
Remote DA&C Modules
All product specifications are subject to change without notice
Last updated : January 2005
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
ADAM-4011
ADAM-4012
ADAM-4013
Thermocouple Input Module
Analog Input Module
RTD Input Module
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Software
IPPC
TPC
FPM
ADAM-4011/4011D
ADAM-4012
ADAM-4013
ATM & AWS
Specifications
 LED Indicator
Specifications
5-digit (ADAM-4011D)
 Built-in Watchdog Timer
Analog Input
 Effective Resolution
 Input Types
 Input Range
16-bit
Th.couple., mV, V or mA
±15 mV, ±50 mV, ±100
mV, ±500 mV, ±1 V, ±2.5
V, ±20 mA
 T/C Type and Temperature Range
J
K
T
E










R
S
B
0 ~ 760° C
0 ~ 1370° C
-100 ~ 400° C
0 ~ 1000° C
Isolation Voltage
Input Surge Protection
Sampling Rate
Input Impedance
Bandwidth
Accuracy
Zero Drift
Span Drift
CMR @ 50/60 Hz
NMR @ 50/60 Hz
500 ~1750° C
500 ~1750° C
500 ~1800° C
3000 VDC
Yes
10 samples/sec.
2 MΩ
2.62 Hz
±0.05 % for V input
±3 mV/° C
±25 ppm/° C
150 dB
100 dB
Analog Input
Analog Input
 Effective Resolution
 Input Type
 Input Range









Isolation Voltage
Sampling Rate
Input Impedance
Bandwidth
Accuracy
Zero Drift
Span Drift
CMR @ 50/60 Hz
NMR @ 50/60 Hz
 Channels
1
logic level 0: +1 V max.
logic level 1: +3.5 V ~
+30 V
pull up current: 0.5 mA,
10 kΩ resistor to +5 V
Max. input frequency:
50 Hz
Min. input pulse width:
1 msec.
 Event Counter
Digital Output
 Channels
 Power Dissipation
 Power Consumption
2, open collector to 30
V, 30 mA max. load
300 mW
1.2 W @ 24 VDC
Ordering Information
Thermocouple Input Module
Thermocouple Input Module
w/ LED Display
DA&C
 Effective Resolution
16-bit
 Input Type
Pt or Ni RTD
 RTD Types and Temperature Ranges
IEC RTD 100 ohms
Pt
-100° C
to
+100° C a = 0.00385
Pt
0° C
to
+100° C a = 0.00385
Pt
0° C
to
+200° C a = 0.00385
Pt
0° C
to
+600° C a = 0.00385
JIS RTD 100 ohms
Pt
-100° C
to
+100° C a = 0.003916
Pt
0° C
to
+100° C a = 0.003916
Pt
0° C
to
+200° C a = 0.003916
Pt
0° C
to
+600° C a = 0.003916
Ni RTD
Ni
-80° C
to
+100° C
Ni
0° C
to
+100° C
 Isolation Voltage
3000 VDC
 Sampling Rate
10 samples/sec.
 Input Impedance
2 MΩ
 Bandwidth
2.62 Hz
 Input Connections
2, 3 or 4 wire
 Accuracy
±0.05% or better
 Zero Drift
±3 mV/° C
 Span Drift
±25 ppm/° C
 CMR @ 50/60 Hz
150 dB
 NMR @ 50/60 Hz
100 dB
Built-in Watchdog Timer
 Channels
2, open collector to 30
V, 30 mA max. load
300 mW
 Power Dissipation
Built-in Watchdog Timer
Digital Output
 ADAM-4011
 ADAM-4011D
16-bit
mV, V or mA
±150 mV, ±500 mV, ±1
V, ±5 V, ±10 V and ±20
mA
3000 VDC
10 samples/sec.
2 MΩ
2.62 Hz
±0.05% or better
±6 mV/° C
±25 ppm/° C
150 dB
100 dB
Digital Input
Digital Input
 Channels
1
Logic levels 0: 1 V max.
1: 3.5~30 V
Pull up current: 0.5 mA, 10 kΩ resistor to +5 V
 Event Counter
Max. input freq.: 50 Hz
Min. input pulse width:
1 msec.
Specifications
Power
 Power Requirements
 Power Consumption
Unregulated 10~30 VDC
1.2 W @ 24 VDC
Power
 Power Requirements
 Power Consumption
Unregulated 10~30 VDC
0.7 W @ 24 VDC
Ordering Information
 ADAM-4013
RTD Input Module – RTD
ADAM-3000
Motion Control
ICOM
eConnectivity
UNO
ADAM-4000
ADAM-5000
ADAM-6000
ADAM-8000
BAS
Ordering Information
 ADAM-4012
Analog Input Module – mV,
mA, or high voltage
Online Download www.advantech.com/products
All product specifications are subject to change without notice
cPCI
Last updated : January 2005
13-17
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
13-18
ADAM-4015
ADAM-4015T
ADAM-4016
6-channel RTD Module with Modbus®
6-channel Thermistor Module with Modbus®
Analog Input/Output Module
NEW
ADAM-4015
ADAM-4015T
ADAM-4016
Specifications
Specifications
Specifications
Analog Input
Analog Input
Analog Input














Effective Resolution
16-bit
Channels
6 differential
Input Type
Pt, Balco and Ni RTD
RTD Types and Temperature Ranges
Pt100 RTD:
Pt -50° C
to
150° C
Pt 0° C
to
100° C
Pt 0° C
to
200° C
Pt 0° C
to
400° C
Pt -200° C
to
200° C
IEC RTD 100 ohms (a = 0.00385)
JIS RTD 100 ohms (a = 0.00392)
Pt 1000 RTD
Pt -40° C
to
160° C
Balco 500 RTD
-30° C
to
120° C
Ni 50 RTD
Ni -80° C
to
100° C
Ni 508 RTD
Ni 0° C
to
100° C
Isolation Voltage
3000 VDC
Sampling Rate
10 samples / sec.
Input Impedance
10 MΩ
Bandwidth
2.62 Hz
Input Connections
2 or 3 wire
Accuracy
± 0.05 % or better
Zero Drift
± 3 µV/° C
Span Drift
± 25 ppm/° C
CMR @ 50/60 Hz
150 dB
NMR @ 50/60 Hz
100 dB
Built-in Watchdog Timer and Individual wire
burned-out detection
Power
 Power Requirements
 Power Consumption
Unregulated
+10 ~ +30 VDC
1.2 W @ 24 VDC
Ordering Information
 ADAM-4015














Effective Resolution
16-bit
Channels
6 differential
Input Type
Thermistor
Thermistor Types and Temperature Ranges
Thermistor 3K
0 ~ 100° C
Thermistor 10K
0 ~ 100° C
Isolation Voltage
3000 VDC
Sampling Rate
10 samples / sec.
Input Impedance
10 MΩ
Bandwidth
2.62 Hz
Input Connections
2 or 3 wires
Accuracy
± 0.05% or better
Zero Drift
± 3 µV/° C
Span Drift
± 25 ppm/° C
CMR @ 50/60 Hz
150 dB
NMR @ 50/60 Hz
100 dB
 Built-in Watchdog Timer
 Individual Wire Burned-out Detection
Power
 Power Requirement
 Power Consumption
Unregulated 10~30 VDC
1.2 W @ 24 VDC
Ordering Information
 ADAM-4015T
6-channel Thermistor Input
Module w/Modbus®




Effective Resolution
Channels
lnput Type
lnput Range









Isolation Voltage
Sampling Rate
Input Impedance
Bandwidth
Accuracy
Zero Drift
Span Ddrift
CMR @ 50/60 Hz
NMR @ 50/60 Hz
16-bit
1 differential
mV and mA
±15 mV, ±50 mV, ±100
mV, ±500 mV, ±20 mA
3000 VDC
10 samples/sec.
2 MΩ
2.62 Hz
±0.05% or better
±6 µV/° C
±25 ppm/° C
150 dB
100 dB
Analog Output







Channel
Output Type
Output Range
Drive Current
Isolation Voltage
Accuracy
Drift
1
V
0 ~ 10 V
30 mA
3000 VDC
0.05% of FSR
±50 ppm/° C
Digital Output
 Channels
2, open collector to 30
V, 30 mA max. load
 Built-in Watchdog Timer
 Built-in TVS/ESD Protection
Power
 Power Requirements
 Power Consumption
Unregulated +10 ~
+30 VDC
2.2 W @ 24 VDC
Ordering Information
 ADAM-4016-A2
Analog Input/Output Module
6-channel RTD Input Module
w/Modbus®
Remote DA&C Modules
All product specifications are subject to change without notice
Last updated : January 2005
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
ADAM-4017+
ADAM-4018+
ADAM-4018M
8-channel Analog Input Module
with Modbus®
8-channel Thermocouple Input
Module with Modbus®
8-channel Analog Input Data
Logger
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Software
IPPC
TPC
FPM
ADAM-4017/4017+
ADAM-4018/4018+
ADAM-4018M
ATM & AWS
Specifications
Analog Input
 Effective Resolution
 Channels
 Channel Independent
Configuration
 Modbus®
 lnput Type
 lnput Range
16-bit
Six differential, two
single-ended (4017)
eight differential (4017+)
ADAM-4017+ only
ADAM-4017+ only
mV, V, mA
±150 mV, ±500 mV, ±1
V, ±5 V, ±10 V, ±20 mA,
4~20mA (4017+ only)
 Isolation Voltage
3000 VDC
 Fault and Overvoltage Withstands overvoltage
Protection
up to ±35 V
 Sampling Rate
10 samples/sec. (total)
 Input Impedance
20 MΩ
 Bandwidth
13.1 Hz @ 50 Hz,
15.72 Hz @ 60 Hz
 Accuracy
±0.1% or better
 Zero Drift
±6 µV/° C
 Span Drift
±25 ppm/° C
 CMR @ 50/60 Hz
92 dB min.
Built-in Watchdog Timer
 Power Requirements
Unregulated +10 ~
+30 VDC
 Power Consumption
1.2 W @ 24 VDC
 Built-in TVS/ESD Protection
Ordering Information
 ADAM-4017-D2
 ADAM-4017+
8-channel Analog Input
Module
8-channel Differential Analog
Input Module w/Modbus®
Specifications
Specifications
Analog Input
Analog Input
 Effective Resolution
 Channels
 Effective Resolution
 Channels





16-bit
Six differential, two
single-ended (4018)
eight differential (4018+)
Ch. Independent Conf. ADAM-4018+ only
Modbus®
ADAM-4018+ only
lnput Type
Thermocouple, mV,
V, mA (4018) (4018+
Supports T/C & 4~20
mA only)
lnput Range
±15 mV, ±50 mV, ±100
mV, ±500 mV, ±1 V, ±2.5
V, ±20 mA (4018);
4~20 mA (4018+)
T/C Type and Temperature Ranges



J 0 ~ 760° C
K 0 ~ 1370° C
T -100 ~ 400° C
E 0 ~ 1000° C
Isolation Voltage
Fault and Overvoltage
Protection
Sampling Rate
Input Impedance
Bandwidth




Accuracy
Zero Drift
Span Drift
CMR @ 50/60 Hz


R
S
B
500 ~1750° C
500 ~1750° C
500 ~1800° C
3000 VDC
Resists overvoltage up
to ±35 V
10 samples/sec. (total)
20 MΩ
13.1 Hz @ 50 Hz,
15.72 Hz @ 60 Hz
±0.1% for voltage input
±3 µV/° C
±25 ppm/° C
92 dB min.
Built-in Watchdog Timer and Individual wire
burned-out detection (4018+ only)
 Power Requirements
Unregulated +10 ~
+30 VDC
 Power Consumption
0.8 W @ 24 VDC
 Built-in TVS/ESD Protection
Ordering Information
 ADAM-4018-D2
 ADAM-4018+
DA&C
16-bit
Six differential, two
single-ended
cPCI
 lnput Type
Thermocouple, mV, V,
mA
 lnput Range
±15 mV, ±50 mV, ±100 ADAM-3000
mV, ±500 mV, ±1 V, ±2.5
V, ±20 mA
 T/C Type and Temperature Range
J
K
T
E
R
S
B
0 ~ 760° C
0 ~ 1370° C
-100 ~ 400° C
0 ~ 1000° C




Isolation Voltage
Sampling Rate
Input Impedance
Bandwidth




Accuracy
Zero Drift
Span Drift
CMR @ 50/60 Hz
500 ~1750° C
500 ~1750° C
500 ~1800° C
3000 VDC
10 samples/sec. (total)
1.8 MΩ
13.1 Hz @ 50 Hz,
15.72 Hz @ 60 Hz
±0.1% for voltage input
±3 µV/° C
±25 ppm/° C
92 dB min.
Storage
 Capacity
38,000 samples (total)
(128 KB flash memory)
 Storage Mode
Write to end of memory
& cyclic
 Logging Mode
Internal log or event log
(high/low)
 Sampling Interval
2 secs. ~ 18 hours
Built-in Watchdog Timer
 Power Requirements
 Power Consumption
Unregulated +10 ~
+30 VDC
1.8 W @ 24 VDC
ICOM
eConnectivity
UNO
ADAM-4000
ADAM-5000
ADAM-6000
ADAM-8000
BAS
Ordering Information
 ADAM-4018M
8-ch. Th.couple Input Module
8-ch. Differential, mA and
Thermocouple Input Module
w/Modbus®
8-channel Analog Input
Data logger – mV, V, mA, or
thermocouple
Online Download www.advantech.com/products
All product specifications are subject to change without notice
Motion Control
Last updated : January 2005
13-19
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
13-20
ADAM-4019+
ADAM-4021
ADAM-4022T
8-channel Universal Analog Input Module with Modbus®
Analog Output Module
Serial Based Dual Loop PID Controller
NEW
ADAM-4019+
ADAM-4021
ADAM-4022T
Specifications
Specifications
Specifications
Analog Input
Analog Output
Analog Input
 Effective Resolution
 Channels
 Effective Resolution
 Output Type
 Output Range












16-bit
8 differential channels
for individual input type
Input Type
Thermocouple, mV,
V,mA
Input Range
+/-1V, +/-2.5V, +/-5V,
+/-10V,
+/- 100mV, +/-500mV,
+/-20mA, +4~20mA
T/C Type and Temperature Range
J
0 ~ 760 °C
K
0 ~ 1370 °C
T
-100 ~ 400 °C
E
0 ~ 1000 °C
R
500 ~ 1750 °C
S
500 ~ 1750 °C
B
500 ~ 1800 °C
Burn-out Detection
+4~20mA & All T/C
Isolation Voltage
3000 VDC
Fault and Over-voltage Protection
Resists over-voltage up
to 35 V
Input Impedance
20 M Ω
Bandwidth
13.1 Hz @ 50 Hz, 15.72
Hz @ 60 Hz
Accuracy
±0.1% of voltage input
Zero Drift
±3 µV/°C
Span Drift
±25 ppm/°C
CMR @ 50/60 Hz
92 dB min.
Built-in Watchdog Timer
Power
 Power Requirements
 Power Consumption
Unregulated
+10 ~ +30 VDC
1.0 W @ 24 VDC
Ordering Information
 ADAM-4019+
8-channel Universal
Analog Input module
with Modbus®









12-bit
mA, V
0 to 20 mA, 4 to 20 mA,
and 0 to 10 V
Isolation Voltage
3000 VDC
Output Impedance
0.5 Ω
Accuracy
±0.1% of FSR for
current output
±0.2% of FSR for
voltage output
Readback Accuracy
±1% of FSR
Resolution
±0.015% of FSR
Zero Drift
Voltage output:
±30 µV/° C
current output:
±0.2 µA/° C
Span Temperature Coefficient
±25 ppm/° C
Programmable
0.125 ~ 128 mA/sec.
0.0625 ~ 64.0 V/sec.
Output Slope
Current Load Resistor 0 to 500 Ω (source)
 Channels
 Input Type
 Input Range
4
mA, V, Thermistor, RTD
0 to 20 mA, 4 to 20 mA,
0 to 10 V
 Thermistor Type and Temperature Ranges
Thermistor 3K:
0 ~ 100° C
Thermistor 10K:
0 ~ 100° C
 RTD Type and Temperature Ranges
Pt 100 RTD
Pt -100 ~ 100° C
Pt 0 ~ 100° C
Pt 0 ~ 200° C
Pt 0 ~ 600° C
IEC RTD 100 ohms (a = 0.00385)
JIS RTD 100 ohms (a = 0.00392)
Pt 1000 RTD
Pt -40 ~ 160° C
Analog Output
 Channels
 Output Type
 Output Range
Built-in Watchdog Timer
Digital Input
Power
 Channels
 Dry Contact
 Power Requirement
 Power Consumption
Unregulated
|+10 ~ +30 VDC
1.4 W @ 24 VDC
Ordering Information
 ADAM-4021
Analog Output Module – V or
mA
2
mA,V
0 to 20 mA, 4 to 20 mA,
0 to 10 V
2
Logic level 0-close to
GND
Logic level 1-open
Digital Output
 Channels
2
Open Collector to 30 V,
100 mA max. load
3,000 VDC
Surge Protection
(Power)
Built-in Watchdog Timer
 Power Requirements
 Power Consumption
Unregulated 10 ~ 30 VDC
4 W @ 24 VDC
Ordering Information
 ADAM-4022T
Serial Based Dual Loop PID
Controller
Remote DA&C Modules
All product specifications are subject to change without notice
Last updated : January 2005
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
ADAM-4024
ADAM-4050
ADAM-4051
4-channel Analog Output Module with Modbus®
Digital I/O Module
16-channel Isolated Digital Input Module with LED & Modbus®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Software
IPPC
TPC
FPM
ADAM-4024
ADAM-4050
ADAM-4051
ATM & AWS
Specifications
Specifications
Specifications
Analog Output
Digital Input
Digital Input




Effective Resolution
Channels
Output Type
Output Range
 Isolated Voltage
 Output Impedance
 Accuracy
 Resolution
 Zero Drift
12-bit
4
mA, V
0 to 20 mA, 4 to 20 mA,
±10 V
3000 VDC
0.5 Ω
±0.1 % of FSR for
current output
±0.1 % of FSR for
voltage output
±0.015 % of FSR
Voltage output: ±30
µV/° C
current output: ±0.2
µA/° C
±25 ppm/° C
 Span Temperature
Coefficient
 Programmable Output 0.125 ~ 128 mA/sec.
0.0625 ~ 64.0 V/sec.
Slope
 Current Load Resistor 0 to 500 Ω (source)
Built-in Watchdog Timer
 Isolated Digital Input
 Channels
7
logic level 0: +1 V max.
logic level 1: +3.5 V ~
+30 V
pull up current: 0.5 mA,
10 kΩ resistor to +5 V
Digital Output
 Channels
8
open collector to 30 V,
30 mA max. load
power dissipation: 300
mΩ
Built-in Watchdog Timer
Power
 Power Requirements
 Power Consumption
Unregulated +10 ~
+30 VDC
0.4 W @ 24 VDC
Ordering Information
 ADAM-4050
Digital I/O Module
DA&C
 Channels
 Input Voltage
 Input Voltage level
16
50 V max
(Configurable)
Dry contact:
logic level 0: close to
GND
logic level 1: open
wet contact:
logic level 0: +3 V max
logic level 1: +10 to
50 V
 Optical Isolation
2,500 VDC
 Over Voltage Protection 70 VDC
Built-in Watchdog Timer
 Power Consumption
 LED Indicator
1 W @ 24 VDC (Typical)
On: Active
Off: Non-active
Ordering Information
 ADAM-4051
Channel: 4
level 0: +1 V max
level 1: 10 ~ 30 VDC
16-channel Isolated Digital
Input Module with LED and
Modbus®
ADAM-3000
Motion Control
ICOM
eConnectivity
UNO
ADAM-4000
ADAM-5000
Built-in Watchdog Timer
 Power Requirement
cPCI
Unregulated +10 ~
+30 VDC
3 W @ 24 VDC
ADAM-6000
Ordering Information
ADAM-8000
 Power Consumption
 ADAM-4024
4-channel Analog Output
Module w/Modbus® V or mA
BAS
Online Download www.advantech.com/products
All product specifications are subject to change without notice
Last updated : January 2005
13-21
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
13-22
ADAM-4052
ADAM-4053
ADAM-4055
ADAM-4052
Isolated Digital Input Module
16-channel Digital Input Module
16-channel Isolated Digital I/O Module with LED & Modbus
ADAM-4053
Specifications
ADAM-4055
Specifications
Digital Input
Specifications
Digital Input
 Channels
8
six fully independent
isolated channels.
two isolated channels
with common ground
Logic level 0: +1 V max.
Logic level 1: +3 ~
+30 V
5,000 VRMS
3 kΩ/0.5 W
 Digital Input Level
 Isolation Voltage
 Input Resistance
Built-in Watchdog Timer
Power
 Power Requirements
 Power Consumption
Unregulated +10 ~
+30 VDC
0.4 W @ 24 VDC
Digital Input/Output
 Channels
 Digital Input Level
16
Dry contact
Logic level 0: close to
GND
Logic level 1: open
Wet contact
Logic level 0: +2 V max.
Logic level 1: +4 V ~
+30 V
500 m max.
 Effective Distance
(dry contact only)
Built-in Watchdog Timer
Power
 Power Requirements
Unregulated +10 ~
+30 VDC
1.0 W @ 24 VDC
Ordering Information
 Power Consumption
 ADAM-4052
Ordering Information
Isolated Digital Input Module
 ADAM-4053
16-channel Digital Input
Module
 Channels
 I/O Type
 Digital Output
16
8 DO & 8 DI
Open collector to 40 V
(200 mA max. load)
 Digital Input
(Configurable)
Dry Contact:
Logic level 0: open
Logic level 1: close to
GND
Wet Contact:
Logic level 0: +3 Vmax
Logic level 1: +10 to
50 V
 Optical Isolation
2500 VDC
 Over Voltage Protection 70 VDC
Built-in Watchdog Timer
 Power Consumption
 LED Indicator
1 W @ 24 VDC (Typical)
On: Active
Off: Inactive
Ordering Information
 ADAM-4055
16-channel Digital I/O Module
with LED and Modbus®
Remote DA&C Modules
All product specifications are subject to change without notice
Last updated : January 2005
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
ADAM-4056S
ADAM-4056SO
ADAM-4060
ADAM-4068
12-channel Sink Type Isolated Digital Output Module
12-channel Source Type Isolated Digital Output Module
4-channel Relay Output Module
8-channel Relay Output Module with Modbus® and LED
NEW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Software
IPPC
TPC
FPM
ADAM-4060
ADAM-4056S/4056SO
ADAM-4068
ATM & AWS
Specifications
Specifications
Specifications
ADAM-4056S and ADAM-4056SO
Relay Output
Relay Output
 Channels
 Channels







Channels
12
Optical Isolation
5,000 VDC
Power Requirement
Unregulated 10~30 VDC
Power Consumption
1 W @ 24 VDC
Built-in Watchdog Timer
ADAM-4056S
 Digital Output Type
 I/O Type
 Digital Output
 Certifications
Sink
Sink Type Output
Open collector to 40V
(200mA max. load)
CE, FCC





4-channels relay, two
Form A and two Form C
Contact Rating
AC: 125 V @ 0.6 A
250 V @ 0.3 A
DC: 30 V @ 2 A
110 V @ 0.6 A
Breakdown Voltage
500 VAC (50/60 Hz)
Relay on Time (typical) 3 ms
Relay off Time (typical) 1 ms
Total Switching Time 10 ms
Insulation Resistance 1,000 MΩ minimum at
500 VDC
Built-in Watchdog Timer
ADAM-4056SO
 Digital Output Type
 I/O Type
 Digital Output
Source
Source Type Output
VCC: 10 ~ 35 VDC
Current: 1A (per ch.)
 Certifications
CE, FCC
 Over Current Detection and Protection
Ordering Information
 ADAM-4056S
 ADAM-4056SO
Four form A and four
form C
Contact Rating
AC: 125 V @ 0.6 A
250 V @ 0.3 A
DC: 30 V @ 2 A
110 V @ 0.6 A
Breakdown Voltage
500 VAC (50/60 Hz)
Relay on Time (typical) 2 ms
Relay off Time (typical) 4 ms
Insulation Resistance 1,000 MΩ minimum at
500 VDC
Built-in Watchdog Timer
 System and Comm. Watchdog
Power
Power
 Power Requirements
 Power Consumption
Unregulated 10~30 VDC
0.8 W @ 24 VDC
Ordering Information
 ADAM-4060




DA&C
4-channel Relay Output
Module
ADAM-3000
Motion Control
ICOM
eConnectivity
 Power Requirements
 Power Consumption
Unregulated 10 ~30 VDC
0.6 W @ 24 VDC
Ordering Information
 ADAM-4068
cPCI
8-channel Relay Output
Module with Modbus® and
LED
12-channel Sink Type Isolated
Digital Output Module
12-channel Source Type
Isolated Digital Output
Module
UNO
ADAM-4000
ADAM-5000
ADAM-6000
ADAM-8000
BAS
Online Download www.advantech.com/products
All product specifications are subject to change without notice
Last updated : January 2005
13-23
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
13-24
ADAM-4069
ADAM-4080
ADAM-4080D
ADAM-4914V
8-channel Power Relay Output Module with Modbus®
Counter/Frequency Module
Counter/Frequency Module with LED Display
4-channel Voltage Input Surge Protection Module
NEW
ADAM-4069
ADAM-4080/4080D
ADAM-4914V
Specifications
Specifications
Specifications
Relay Output
Counter Input
Input
 Channels
 Contact Rating
 Channels
 Channels





8 form A
AC: 250 V @ 5 A
DC: 30 V @ 5 A
Breakdown Voltage
1000 VAC (50/60 Hz)
Relay on Time (typical) 5 ms
Relay off Time (typical) 5.6 ms
Insulation Resistance 1,000 MΩ minimum at
500 VDC
Built-in Watchdog
System and Comm.
Timer
Watchdog





Power
 Power Requirements
 Power Consumption
Unregulated
+10 ~ +30 VDC
0.6 W @ 24 VDC
Ordering Information
 ADAM-4069
8-channel Power Relay
Output Module with
Modbus®





Two independent 32-bit
counters
Input Frequency
50 kHz max.
Input Mode
lsolated or non-isolated
Isolation Input Level
Logic level 0: +1 V max.
Logic level 1: +3.5 V ~
+30 V
Isolation Voltage
2500 VRMS
Non-isolated
Programmable
threshold:
Input Level
Logic level 0: 0 to +5 V
(default = 0.8 V)
Logic level 1: 0 to +5 V
(default = 2.4 V)
Input Pulse Width
>10 ms.
Maximum Count
4,294,967,295 (32 bits)
Programmable Digital 2 ~ 65 ms
Noise Filter
Alarm
Alarm comparator on
each counter
Preset Type
Absolute or relative
Frequency Measurement
4 differential voltage
input and thermocouple
Performance
 Discharge Voltage
 Max. Surge Voltage
BETWEEN LINES: 18 V
min
LINE TO GND: 350 V
max.
BETWEEN LINES: 23 V
min
LINE TO GND: +4,000 V
max.
BETWEEN LINES: ≤
10µA @ 7.5 VDC
 Leakage Current
LINE TO GND: ≤ 5µA @
+140 VDC
 Response Time
 Discharge Current
 Internal Series
Resistance
 Maximum Line Voltage
≤ 0.1 µsec.
5,000 A (8/20 µsec.)
Approx. 20Ω including
return
10 V
 Range
5 Hz ~ 50 kHz
 Programmable Built-in 1.0/0.1 sec.
Gate Time
Display (ADAM-4080D Only)
 LED Indicator
5-digit readout,
CH 0 or CH 1
(programmable)
Digital Output
 Channels
2
Open collector to 30 V,
30 mA max. load
power dissipation: 300
mW for each channel
Built-in Watchdog Timer
Power
 Power Requirements
 Power Consumption
Ordering Information
 ADAM-4914V
 ADAM-4080
 ADAM-4080D
4-channel Voltage Input
Surge Protection Module
Counter/Frequency Module
Counter/Frequency Module
with LED Display
Unregulated 10~30 VDC
2.0 W @ 24 VDC
Remote DA&C Modules
All product specifications are subject to change without notice
Last updated : January 2005
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
ADAM-4950-ENC
IP66 Industrial
Enclosure
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Software
 Resists temperatures up to 115° C (239° F)
 Sidewall knockouts provide factory molded openings that are
conveniently positioned for wire, cable or conduit feeders.
 Groove-and-lip type seal design provides the highest degree of protection
 Built-in DIN-rail for easy mounting of ADAM modules
 Cable glands included
IPPC
TPC
FPM
ATM & AWS
Introduction
The ADAM-4950-ENC IP66 Industrial Enclosure is designed for use in harsh environments. It offers space for 1 to 3 ADAM modules. Its rugged protective housing guards modules DA&C
from UV radiation, corrosive materials, moisture and extreme temperatures.
cPCI
ADAM-3000
Motion Control
Mounts in any position
Several screw options let you fasten the box in
almost any position.
IP66 protection
Resists dust, water jets and even temporary
flooding.
Lip-groove seal
Non-aging polyurethane seal. Cannot fall out
or loosen.
ICOM
eConnectivity
Dimensions
UNO
Unit: mm
ADAM-4000
ADAM-5000
DIN-rail installation
No screws; just snap the module in place.
Offers space for three modules.
Enclosure Components
 Case
Glass filled
polycarbonate (PC),
transparent cover
 Accessories (included) 1 x DIN-rail (21.5 cm)
2 x Polyamide cable
glands (seal from 10
- 14 mm)
4 x Captive lid screws
ADAM-6000
ADAM-8000
BAS
Ordering Information
 ADAM-4950-ENC
IP66 Industrial Enclosure
Online Download www.advantech.com/products
All product specifications are subject to change without notice
Last updated : January 2005
13-25
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
13-26
ADAM 4000 Series
Common Specifications
Common
Information
Dimensions
Unit: mm
Communication
 RS-485 (2-wire) to host
 Speeds: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps (ADAM-4080,
ADAM-4080D only support up to 38400 bps)
 Max. communication distance: 4000 feet (1.2 km)
 Power and communication LED indicator
 ASCII command/response protocol
 Communication error checking with checksum
 Asynchronous data format: 1 start bit, 8 data bits, 1 stop bit, no parity
 Up to 256 multidrop modules per serial port
 Online module insertion and removal
 Transient suppression on RS-485 communication lines
Power Requirements
 Unregulated +10 ~ +30 VDC
 Protected against power reversal
Mechanical
 Case
 Plug-in screw
terminal block
ABS with captive mounting hardware
Accepts 0.5 mm2 to 2.5 mm2,
1 - #12 or 2 - #14 to #22 AWG
Environment




Operating Temperature
EMI
Storage Temperature
Humidity
-10 ~ 70° C (14 ~ 158° F)
Meets FCC Class A
-25 ~ 85° C (-13 ~ 185° F)
5 ~ 95%, non-condensing
Remote DA&C Modules
All product specifications are subject to change without notice
Last updated : January 2005
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising