Azden | 100UPR | User manual | Azden 100UPR User manual

AUDIO FOR VIDEO
800.947.9923 ( 212.444.5023
WIRELESS SYSTEMS
100 Series
VIDEO QUICK
DIAL
91 (
EW112P/122P G2
Evolution G2 100 Series
UHF Wireless Systems
ENG UHF Wireless Bundle
UHF Lavalier Wireless System
• 100 Phase Lock Looped channels
• 300’ operating range typical
• True Diversity operation
• Balanced XLR output
with level control
• 5-7 hour life using a single
9 volt battery
• Headphone jack with
volume control
• ATW-T101 Body-pack Transmitter
Available with AT831 cardioid or MT830
Omni-Directional Lav mics
• ATW-T102 Plug-on Transmitter
3-pin XLR input for use with all dynamic
and most self powered mics
Bundle includes: Camera Mountable Receiver,
Bodypack Transmitter,
Clip-On Mic & Plug-On Transmitter
EW112P Kit includes: SK100 G2 Bodypack Transmitter,
EK100G2 Camera-Mountable Receiver, ME2 Lavalier
Microphone (EW112P G2 includes ME4 Lavalier
Microphone)
Any System ...........................................$499.95
# SEEW100ENG2 .....................................$599.95
• 30% smaller than original
• “AA” Battery Power
• 1440 Frequency Auto Scanning
• Camera Shoe Mountable
• 4 preset channels
• 1,440 tunable frequencies with
auto scanning
• LCD Display: Audio Level with
Peak Hold, Channel and Low
Battery Warning
• Rugged metal design
• Camera shoe mountable receiver
ME 2 clip-on mic.
SK 100 G2 bodypack transmitter
SKP 100 G2 plug-on transmitter
EK 100 G2 camera receiver
Connecting cables & Batteries included
100LT
®
®
# SEEW112PG2.......................................$499.99
# SEEW122PG2.......................................$499.95
200U
Micro 32 Series
Affordable UHF Wireless System
Dual Channel Wireless Microphone System
32 Channel Diversity Wireless
• 63 user-selectable channels in the
794-806MHz band.
• The 100UPR crystal-controlled, PLL
synthesized UHF receiver offers dual
antennas, 1/8” balanced mic level and
headphone monitor output jacks, signal
status LED and a channel selector.
• The receiver comes with mounting Velcro
and a 1/8” – 1/8” output cable (Azden’s
MX-1 1/8” to XLR cable is optional).
• The 10BT bodypack transmitter features
a Standby switch for audio muting
and frequency selector switches and includes the EX-503
omnidirectional lapel micr and a metal belt-clip
• Both the 100UPR and 10BT operate for better than 8 hours on a
single 9V battery and are housed in small cases (3 7/8 x 2 3/8 x
13/16) that are ideal for compact digital cameras.
Includes:
200UPR Receiver
NEW!
(2) 10BT Bodypack Transmitters
• Camera mountable receiver
• UHF 63-Channel Selectable
• 2-Channel Receiver
• Operates for better than 8 hours
on 6 “AA” batteries
# AZ200ULT ......................$679.95
• UM-32 receiver with 32 UHF channels
• Advanced diversity wireless circuitry
• Channel and group selectors
• Systems include the
PLL-synthesized T32 body pack
or H32 handheld transmitter
Complete UM-32 Systems
Also Available with additional 51XT Plug-In Transmitter
# AZ200ULX...........................................$719.95
# AZ100LT .............................................$339.95
Also Available with additional 10HT Handheld Transmitter
# AZ200ULH ..........................................$699.95
UM-32 Receiver w/ T32 Body Pack Transmitter and MT350 Lav
# SAUM32L350 ....................................................$349.95
UM-32 Receiver w/ T32 Body Pack Transmitter and AT831 Lav
# SAUM32L831 ....................................................$399.95
UM-32 Receiver w/ T32 Body Pack Transmitter and ECM44 Lav
# SAUM32L44 .....................................................$449.95
UM-32 Receiver w/ H32 Handheld Transmitter and Q Mic Capsule
# SAUM32HHQ7 ...................................................$389.95
UCR-401
100 Series
SM
Wideband UHF Wireless Systems
Digital Hybrid Diversity Receiver
Miniature Digital Hybrid Transmitter
• 256 selectable frequencies • Dual-band compandors
• Rugged machined aluminum construction with ultra
rugged tempered alloy antennas
• 9 Volt alkaline and lithium battery operation
UCR100 Compact Receiver –
• Output level control
• High sensitivity for extended range
• Unbalanced 1/8” output
UM100 Beltpack Transmitter –
• Over 30dB input limiting range
• TA5F 5-pin locking audio input jack
• Dual LEDs for accurate gain adjustment
• Variable low frequency roll-off
• Slim, spring-wire contoured belt clip
• Digital Hybrid Wireless
• LCD with spectrum scanner
• Powers via two AA batteries or DC power
• SmartSquelch and SmartDiversity
• 256 selectable UHF frequencies
• Compatibility with analog transmitters
• DSP-based pilot tone suelch
• Balanced XLR output
• Super Miniature Transmitter
• Digital Hybrid Wireless Technology
• LCD and membrane switch control panel
• 256 synthesized UHF frequencies
• 100 mW output power
• Wide input dynamic range
• Four-level audio metering
• DSP based pilot-tone signal
• Circulator/Isolator output stage
• Water-resistant, machined aluminum housing
• Compatible with all Lectrosonics Digital Hybrid
Wireless receivers, plus Lectrosonics 100 / 200 Series
analog products
# LEUCR100 ............................................... CALL
# LEUM100 ................................................ CALL
NEW!
# LEUCR401A ............................................. CALL
LM
# LESM .................................................... CALL
UH400
400 Series
Digital Hybrid Transmitter
Plug On Transmitter
Digital Hybrid Wireless System
The new LM transmitter incorporates the new Digital Hybrid
Wireless™ design that combines 24-bit digital audio with an
analog FM radio link to provide outstanding audio quality and
the extended operating range.
The LM transmitter brings this advanced technology to
a moderate cost level while preserving superb
performance and maximum flexibility.
Digital Hybrid design has multi-mode compatibility
with several different hybrid and analog receivers and
can be used with the 100, 200 and 400 receivers.
The UH400 is a digital hybrid synthesized UHF plug-on
transmitter compatible with all receivers in the 400, 200
and 100 Series product groups.
Digital Hybrid Wireless™
combines digital audio with
an analog FM radio link to provide
outstanding audio quality and the
extended operating range
of the finest analog wireless
systems. The 400 series product
group includes the UCR411A
compact receiver for field
production and location recording.
Transmitters include the UM400 belt-pack,
MM400B miniature aluminum model,
and the UH400 plug-on.
• 256 synthesized frequencies • 50 mW output power
• DSP based pilot-tone signal • DSP controlled, dual envelope
input limiter • 5-pin input jack for mic and line level signals
• Rugged machined aluminum construction
# LELM .................................................... CALL
• Digital Hybrid Wireless™
Technology
• 5, 15 and 48 volt
phantom power
• 256 UHF frequencies
• 100 mW output power
• DSP based pilot-tone signal Isolator
# LEUH400 ................................................ CALL
MARCH 2006
216
AUDIO FOR VIDEO
www.bhphotovideo.com
VIDEO QUICK
DIAL
91 (
WIRELESS SYSTEMS & ACCESSORIES
WRR-861B / WRR-862B
WRT-822B
Portable UHF Diversity Receiver
UHF Transmitter
Camera Mount UHF Wireless System
• Space Diversity Tuner
• 188 tunable frequencies
• Switchable RF squelch
• 8 hrs of continuous operation
w/ 4 “AA” batteries
UWP-C1 – Lavalier Wireless System
• Features 188 selectable UHF frequencies
• Diversity camera-mountable Receiver
• Durable body-pack transmitter with belt clip
• Omni-directional lavalier microphone
• Supplied with camera shoe mount
# SOUWPC1................. $499.95
• Two UHF-synthesized dual diversity
tuners built in to a single camera
mountable unit
• 188 tunable frequencies
• 5 hrs of continuous operation w/ 4 “AA” batteries
• UHF body-pack transmitter with PLL synthesized
control transmission
• Transmits battery alarm to compatible Sony receivers
• 188 frequencies covering
4 TV channels (24mHz)
• Compatible with all Sony 800 Series model
receivers in the 770-806mHz range.
• Sturdy and lightweight
magnesium-alloy casing
• Lavalier microphone compatibility
• 8 hours continuous operation with
2 “AA”-size (LR6) alkaline batteries
• Easy-to-read LCD display • 100Hz-15kHz frequency response
• Accepts all Sony BC Series lavalier mics including the
ECM-44SC/BC, 55 SC/BC, 66 SC/BC and 77 SC/BC.
Use for wireless guitar applications, with optional K-1161 cable.
# SOWRR862B ........................................... CALL
# SOWRT822B ............................................ CALL
# SOWRR861B .......... CALL
Portable Dual UHF Receiver
500 Series
®
®
Pro UHF Wireless Systems
Pro UHF Wireless Systems
Wireless audio receiver
camera mount designed
to work with compact
professional digital
video cameras.
• Mounts under the
camcorder allowing
connection to tripods
and shoulder braces.
• Soft Velcro interior protects Wireless Receiver
• Support arm keeps the camera stable
500UDR Features
• UHF receiver with 63 user-selectable channels
• XLR output with level control
• LED indicators for AF Peak and Power on/Reception
• Supplied w/ heavy duty velcro. Runs on 4 “AA”
batteries or 12V DC input w/ 4-pin XLR connector
51BT Bodypack Transmitter
• Available w/ EX503H and Sony ECM44H
lavalier mics • Input level control
• Standby switch • Hiroshi 4-pin connector
51XT Plug-In Transmitter
• Allows you to use your favorite dynamic
or phantom powered mic
• Output level control • Audio mute switches
• LED AF Peak and Power indicators
1000URX Diversity Receiver
• 121 UHF Channel wireless system
• Ideally suited for mounting to pro cameras
with the optional Anton Bauer “Gold Mount”
which also supplies the Receiver with power
• Optional 4-pin XLR power cables available
for Canon, JVC, Panasonic, Sony cameras
• LCD status displays on receiver
and transmitters
1000BT Bodypack Transmitter
• Available with choice of omni-directional lav mic
including the EX-503H, Sony ECM-44H/ECM-55H
1000XT Plug-In Transmitter
• Works with dynamic or phantom powered mics
# JIWRB ............................................... $149.95
# AZ500UDR .... 500UDR .................................... $356.95
# AZ51BT ......... 51BT .......................................... $149.95
# AZ51XT ......... 51XT .......................................... $199.95
FREE!
$50
Gift Card!
w/purchase
of UWP-C1
UWP-C3 – Handheld Plug-On System
• Features 188 selectable
UHF frequencies
• Diversity camera-mountable Receiver
• UTX-P1 Plug-On Transmitter
• Supplied with camera shoe mount
# SOUWPC3................. $499.95
Wireless Receiver Holder w/Support Handle
# JIWRBNG .... Box only, no support arm .......... $109.95
1000 Series
# AZ1000URX .... 1000URX ...................................... $539.95
# AZ1000BT ...... 1000BT ......................................... $229.95
# AZ1000XT ...... 1000XT ......................................... $229.95
Mounting Brackets
Wireless Bracket
Wireless Mounting System
A-LWR- Side-mount System
(All camera brands except
Sony- IDX Lock Plate required)
• Wireless microphone receiver bracket provides a practical
solution for videographers in need of suitable mounting
hardware for wireless microphone receivers.
• Camera can be used standalone or with a tripod.
• Works with your existing receiver mounting hardware
• Mounting boxes attach to any camera with the Sony
screw configuration that is most commonly found
on the NP/1 battery holder and the IDX NP/1battery
system as well as a variety of other systems using
optional side plates or brackets.
• Manufactured using powder-coated plate aluminum,
formed and welded to the exact size of your receiver.
• A felt lining protects receivers from the bangs and
bumps of everyday use • Includes all screws
Mounting Boxes
# BE500........ for Sennheiser EW Series ............................ $69.95
# BEAT100..... for Audio Technica 100................................ $69.95
# BESAM1 ..... for Samson UM-1 or UM-32 ....................... $52.95
# BE100........ for Lectrosonics UCR-100 ........................... $69.95
# BE201........ for Lectrosonics UCR-201 ........................... $74.95
# BE195........ for Lectrosonics UCR-211/411.................... $74.95
# BEAZ500 .... for Azden UDR-500 ..................................... $74.95
# BEAZ1000 ... for Azden UDR-1000 ................................... $74.95
# IDALWR ............................ $109.95
A-EWR- Rear-mount V-Lock Plate (All camera brandsIDX Powerlink battery required)
# IDAEWR ............................................. $109.95
A-SWR- Rear-mount System
(Sony cameras only- IDX
Battery not required)
A-UWR- Rear-mount System
(All camera brands except
Sony- IDX V-Lock Plate required)
#BRB1A ................................................................. $59.95
#BRB1C ................................................................. $59.95
# IDAUWR ............................ $109.95
MTO
Bracket 1a
Fits the Panasonic AGDVX100, Sony DSR-PD170,
DSR-PDX10, DCR-VX2100 and other cameras
with a similar size. Weighs only 8.2 oz.
Bracket 1c
Fits Canon XL Series Cameras.
Weighs Only 9.2 oz.
# IDASWR ................ $109.95
Straddlebag
DVCAM Bracket
Brick Battery Wireless Mounting Case
Side Mount Wireless Receiver Bracket
• Saddle bag type holder fits
over brick battery.
The BEC DVCAM Bracket is
designed to be used with
cameras the size of the Sony
PD-170 & DSR-PD150
digital cameras. It attaches
to the tripod screw mount
on the bottom of the camera,
and allows a wireless receiver
to be mounted away from the
camera in the vertical position.
Tripod mounting threads are
provided on the bottom of the bracket.
• Pockets can accommodate a
variety of brands of camera
mountable wireless receivers
on each side
MARCH 2006
UWP-C1 / UWP-C3
• Netting on the underside for
holding heat packs (Heat
Packs are available from
PORTA BRACE)
# MTSB ...... Straddlebag ...................................... $59.95
# MTSBS .... Single Wireless Straddlebag.............. $34.95
# PHP-2...... Polar Heat Pack (Pack of 24) ............ $22.95
# BEDVCAMB ......................................... $169.95
Side Plates and Brackets for Mounting Boxes
Side Plate For Anton Bauer Gold Mount
• Mounts with two thumb- screws to the Anton
Bauer Gold Mount system.
• Allows a BEC Receiver Holder to be
mounted high or low.
# BEABSPU............................ $39.95
Right Angle Bracket for mounting 2 Side
Plates
• The BEC Right Angle Attachment can be used for
a second Plate to be mounted behind the battery.
# BERAA ......................................... $13.95
VLock Bracket
• Provides all Sony cameras manufactured with the VLock for
the Lithium Ion battery system with two mounting surfaces for
Wireless Receiver Holders (one behind the battery and one on the
cameras right side).
# BEVLABSY .................................................$74.95
217
AUDIO FOR VIDEO
800.947.9923 ( 212.444.5023
LAVALIER MICROPHONES & ACCESSORIES
Pin-Mic
VIDEO QUICK
DIAL
91 (
COS-11
Micro-Cat
Concealable Lavalier Mic
Lavalier Microphone
Miniature Windscreen
The Pin-Mic is a professional
Omni-Directional lavalier microphone
with a revolutionary design to be entirely
hidden via Brooches or Buttons etc.
Cable runs are also completely invisible.
Available for indoor use or with built-in
wind protection for outdoor use.
The SANKEN COS-11’s ultra-small
design and superior sonic
characteristics make it the lavalier
microphone of choice for TV news
and other critical broadcast
applications. Available Hardwired
or pre-wired with a TA5F connector
for use with Lectrosonics
wireless systems.
• Ultra-linear, Omni-directional pattern
• Resistant to cosmetics and moisture
• Frequency Response 50HZ - 20kHz
• Max SPL 136dB
• Allows the use of lavalier microphones in extreme
wind conditions that would otherwisecause unwanted
wind interference
• Hand-made from a fuzzy outer layer plus two additional
inner layers of open weave fabric
• Substantially reduces wind noise while remaining
sonically transparent
• The elastic opening easily fits over most lav
microphones with diameters of up to 12mm
– even works with subminiature and supernarrow lav mics
• The supplied miniature screwdrivers are a
convenient way of storing the Micro-Cat, aiding in finding the opening
and keeping them from blowing away during those windy shoots
Available Colors: neutral white, gray, black and tan.
Designed for use outside clothing and often go completely unnoticed
• Wired for Sennheiser EW
& Lectrosonics
• Frequency Response 20Hz - 20KHz
• Max SPL 130dB
# PIIPMTA5B for interior use w/TA5 connector (black) ........$269.00
# PIIPMEWB for interior use w/EW connector (black) ..........$265.00
# PIEPMTA5B for exterior use w/TA5 connector (black) .......$289.00
# PIEPMEWB for exterior use w/EW connector (black) ........$289.00
Tram
TR-50
# SAC0S11SBPB Hardwired with XLR ....................... $399.95
# SAC0S11TA5B Pre-Wired with TA5F connector ...... $324.95
Voice Technologies
VT500/VT506
Omni-Directional Lavalier Microphone
Miniature Lavalier Microphones
• Mini electret condenser with minimum sound coloration
• Includes windscreen, tie clip, tie tac,
vampire mic and cable clip
• Available with a large range of connectors
for direct use with wireless transmitters
• Also available with the TR79 power
supply which has an XLR output
connector and which can be
powered externally or via an internal battery
VT 500- Flat Frequency Omni-Directional
VT 506- 6dB Rising Frequency Omni-Directional
# TRTR50SETP for Sennheiser EW wireless ..........................$229.95
# TRTR50BMLP with Switchcraft TA5F connector .................$229.95
# TRTR50BSOM with Sony 4-Pin Hirose connector...............$268.95
# TRTR50BPS with TR79 hard-wired power supply...............$314.95
# TRTR79SETP Power Supply for Sennheiser EW wireless ...$169.95
# TRTR79MLP Power Supply with Switchcraft TA5M connector .. $167.95
Replacement Windscreens
and Tie Clips for Lavalier Mics
• Ultra-Rugged Design
• Connector Options Include:
TA4F, TA5 or EW
• Includes: 5 clips, windscreen
and waterproof VTO box
• Integral Noise Filter
• Provides Excellent Isolation
# VT0012 with TA5 connector .............................. $230.95
# VT0015 with EW connector............................... $234.95
# VT0035 with TA5 connector .............................. $230.95
# VT0038 with EW connector............................... $234.95
ECM-88BC/ECM-88B
ECM-44B / 77B
Miniature Lavalier Microphone
Lavalier Mics
• Omni-Directional Polar Pattern
• Ultra-Low Handling Noise
• Flat 20Hz-20kHz
Frequency Range
• Includes: Tie Clip,
Double-Pin Clip,
Windscreen, Case
ECM-44B
A Small omni-directional lav
microphone.
Low cost and great sounding.
Ideal for interview, deposition, documentary and other audio/
video applications. Runs on single “AA” battery
• Frequency Response 20Hz - 20kHz • Max SPL 122dB
# SOECM44B..........................................$194.95
ECM-88BC- With 4-pin Hirose Connector
# SOECM88BC ........................................$339.95
ECM-88B- With DC-78 Power Supply & XLR Output
Connector
# SOECM88B..........................................$495.00
ECM-77B
One of the most popular omnidirectional lavalier microphones,
features an ultra-miniature design
for inconspicuous use.
Phantom power or “AA” battery operation
• Frequency Response 40Hz - 20kHz • Max SPL 120dB
# SOECM77B..........................................$319.95
AT-899
Subminiature Lavalier Condenser Mic
• Designed to deliver high sonic performance
in a low-profile, easily Congealable package.
• Ideal for interviews, documentary, film, theater,
and stage applications.
• Maximum intelligibility and low-noise
• Miniature low-profile design
• Omni-directional polar pattern
• Supplied with a large array
of accessories
• Available hardwired or pre-wired
with Sennheiser, Lectrosonics
& Shure Connectors
• Frequency Response 20 Hz - 20 kHz • Max SPL 116dB
# AUAT899 ............................................$199.95
# REMCAT(single) .......................................... $25.00
Audio Technica
# AT8130 ........... miniature foam windscreen f/MT830 (3pk) .....$4.95
# AT8420 .......... metal tie clip f/MT830....................................$6.50
# AT8116 .......... miniature foam windscreen
f/MT803 & MT831 .........................................$9.50
# AT8417 .......... wire tie clip f/MT803 & MT831 ......................$9.50
# AT8411 .......... plastic tie clip f/MT803 & MT831 ..................$9.50
Lectrosonics
# C150 .............. Mic Clip for M150..........................................$5.49
# RK150 ........... Windscreen for M150 ....................................$3.20
Rycote
#RYUC ............. Rycote Undercovers-Disposable
mounting and windshield system for
lavalier mics (30pak) ...................................$24.95
#RYOC ............. Rycote Overcovers-Semi-Disposable
mounting and windshield system for
lavalier mics (30pak) ...................................$34.95
Shure
# RK355WS ...... windscreen f/ SM93/WL93 ..........................$17.95
# RK183T1 ....... f/ MX183/184/185 (2pk) ..............................$32.95
# RK354SB .......single bar tie clips f/SM93/WL93 (2pk) ........$12.95
# RK307DB....... double tie clips f/SM93/WL93 (2pk) ............$17.95
# RK203TC ....... tie clasp f/SM11 ..........................................$12.95
Sony Mics
# SOWS44 ........ black urethane windscreen f/ECM-44 ..........$17.95
# SOWSU77S ....black urethane windscreen f/ECM-77 .............$9.99
# SOWSM77S ... black metal windscreen f/ECM-77 ...............$19.95
# SOADR77B ....blk metal windscreen f/ECM-77 (6pk) ..........$94.95
# SOSC44......... Tie clip f/ECM-44 .........................................$16.95
# SOSC77......... Tie clip f/ECM-77 .........................................$14.95
Sennheiser
# SEMZW-2EW . metal windscreen f/ME2 ..............................$10.00
# SEMZW-2F..... foam windscreen f/ME...................................$4.95
# SEMZQ2EW ... tie clip f/ME ...................................................$5.50
Tram
# TRMC2........... Vampire mic cage
(isolates mic from clothing/tie) ...................$21.95
# TRBWS .......... Windscreen .................................................$12.49
# TRBCOH ........ Vampire clip-on holder ..................................$8.49
# TRBCH .......... Vampire cable holder .....................................$6.95
# TRBTB ........... Tie bar ...........................................................$7.49
EMW
B6
Lavalier Microphone
Moisture-Resistant Lavalier Mirophone
The EMW Omni-Directional mic is
highly water resistant and has very low
rubbing noise, making it the ideal mic for
hiding under clothing in motion picture
and TV production and a good general
purpose lavalier for churches, schools,
interviews, news etc.
The B6 is an ultra-miniature
condenser mic measuring only 1/10
of an inch (2.5mm) in diameter.
The rugged B6 features replaceable
protective caps that can change its
frequency response and color to
match your application.
Available in five colors,
hardwired or wireless.
• Frequency Response 20Hz - 20KHz
• Max SPL 130dB
• Makeup and Sweat Resistant
• Available in Five Colors
• Includes: Tie clip, Wind Screen and (3) H.F Response
Control Protective Caps
• A Wide Variety of Connector Options are Available
MARCH 2006
218
AUDIO FOR VIDEO
www.bhphotovideo.com
VIDEO QUICK
DIAL
91 (
AT-3031
Neumann
KM184
NT3
Small Diaphragm Cardioid Condenser
Compact Small Diaphragm
Small Diaphragm Super-Cardiod
The AT3031 is a versatile small-diaphragm condenser
microphone great for critical dialog and ambiance recording
at a very affordable price.
• Cardioid pickup pattern
• Frequency response: 30Hz to 20kHz
• High max SPL and wide dynamic range
• Very low self noise
• Lo-cut switch and 10dB pad
• Includes: AT8405 stand clamp,
foam windscreen, protective case
# AUAT3031 ...........................................$169.95
The KM 184 is a compact, small diaphragm cardioid
condenser microphone that provides a high-quality
alternative to shotgun microphones; when recording
critical dialog, ambience, and sound
effects in controlled location sound environments.
• Cardioid pickup pattern
• Sold individually or in matched pairs
• Available in non-reflective black or nickel finish
• Frequency response: 20Hz to 20kHz
• Includes: Wooden jewel box, windshield,
stand and cable mount
The NT3 is an affordable small diaphragm supercardioid condenser microphone ideal for location
sound applications like: dialog recording, sound effects
acquisition, and general ambience recordings.
• Hypercardioid pickup pattern
• 48-Volt phantom powered with optional 9-volt
battery operation • Internal capsule shock mounting
• High immunity to R.F. interference
• Battery status indicator
• Frequency response: 20Hz to 20kHz
• Includes: Zipper pouch, windscreen, and stand mount
# NEKM184MT........................................$729.95
AT-4041
# RONT3 ...............................................$179.95
MKH-30
C1000S
Small Diaphragm Cardioid Condenser
Bi-Directional Small Diaphragm
Battery Powered Small Diaphragm
The AT4041 is a small-diaphragm cardioid condenser
microphone ideal for dialog and sound effects
recording in controlled environments with minimal
background noise interference.
• Cardioid pickup pattern
• Frequency response: 20Hz to 20kHz
• Smooth, extended response
with slight high-end emphasis
• Switchable hi-pass filter • Rugged brass housing
• Includes: Stand clamp, windscreen, protective case
The MKH30 is a small diaphragm figure-of eight condenser
microphone that is designed for bi-directional recording
applications, and can serve as an “S” (side microphone) in
M/S stereo setups.
• Figure-of eight pickup pattern
• High rejection of lateral sounds
• Switchable roll-off filter
• Switchable pre-attenuation
• Frequency response: 40Hz to 20kHz
• Includes: Shock mount, windscreen, and stand adapter
The C1000S is a small diaphragm cardioid condenser
microphone that includes the PPC 1000 converter, allowing
it to be easily switched to a hypercardioid pattern. Phantom
or 9-Volt battery powering make this versatile mic ideal for
mobile recording applications.
• Cardiod pick pattern (switchable to hypercardiod)
• Versatile mobile recording microphone
• 9-volt battery or 48-volt phantom powering
• LED Battery status indicator • Frequency response: 50Hz
to 20kHz • Includes: Windscreen, Stand Adapter, Pattern
Converter, and Carrying Case
# AUAT4041 ...........................................$279.95
# SEMKH30 ........................................ $1,429.95
# AKC1000S...........................................$199.95
NT5
CMC641 Set & Accessories
MKH-50
Small Diaphragm Matched Pair
Colette Modular Microphone System
Small Diaphragm Super-Cardiod
The NT5 (matched pair) are a set of small-diaphragm
cardioid condenser microphones designed for single
or stereo X/Y miking. Great for location sound, spot
miking, and stereo ambience recordings.
• Cardiod pickup pattern
• 2-externally polarized, pressure gradient condensers
• Gold sputtered capsule
• Heavy duty satin-nickel-plated body
• Frequency response: 20Hz to 20kHz
• Includes: Dual wind screens, stand mounts,
and durable road case
The Colette Modular Microphone System is an
established high-end standard for Broadcast
and location sound recording. It is comprised
of a CMC Amplifier(microphone body) and a
Single-Diaphragm Capsule (twenty capsules are
available for this system). Individual components
or complete sets (including: Microphone bodies,
Capsules, and accessories) are available.
The MKH50 is a small-diaphragm super-cardioid microphone with a
high degree of lateral sound rejection; making it an excellent choice
for location sound, spot miking, and high quality dialog recording.
• Super cardioid pickup pattern
• High rejection of lateral sounds
• Exceptionally low inherent noise
• Switchable low frequency roll-off
• Switchable 10dB pad
• Frequency response: 40Hz to 20kHz
• Black anodized light metal body
• Includes: Shock mount, windscreen, and stand adapter
# RONT5 ................................................... CALL
AT-4051a / AT-4053a
40 Series Modular Small Diaphragm
AT4051a
The modular AT4051a is a professional small-diaphragm
cardioid condenser microphone recommended for high-quality
dialog recording and location sound applications.
• Cardioid pickup pattern
• Frequency response: 20Hz to 20kHz
• Exceptionally low self-noise
• Accepts optional interchangeable capsules
• Built-in 80Hz filter for reduced low-end rumble
• Turned brass housing with black chrome plating
• Includes: AT8405 stand clamp, foam windscreen,
protective case
# AUAT4051A ............................................. CALL
MARCH 2006
SMALL DIAPHRAGM MICROPHONES
AT4053a
The modular AT4053a is a professional small-diaphragm
hypercardioid condenser microphone well-suited for critical
broadcast recording applications.
• Hypercarioid pickup pattern
• Frequency response: 20Hz to 20kHz
• Exceptionally low self-noise
• Accepts optional interchangeable capsules
• Built-in 80Hz filter for reduced low-end rumble
• Turned brass housing with black chrome plating
• Includes: AT8405 stand clamp, foam windscreen,
protective case
# AUAT4053A ............................................. CALL
*Interchangeable Capsules and Accessories available separately
CMC641 Set Includes: CMC6 Amplifier,
MK41Super-Cardioid Capsule, SG20 Stand
Clamp, B5 Popscreen and Custom Wooden Case
# SCMC641SA ......................... $1,475.95
Single-Diaphragm Capsules
The Colette Modular Microphone system has
20 different capsules available for a variety of
applications.
MK 41 – Supercardioid, very directional with smooth
off axis response
MK 4 – Cardiod, classic unidirectional pattern
MK 8 – Bi-directional (figure-eight)
Scheops Active Accessories
GVC Capsule Swivel – Allows the
angle of a capsule to be adjusted
on all microphone amplifiers of
the Colette Modular System
# SCGVCG .............. $262.00
Cut 1– Fixed low-cut 60Hz at 24dB
/oct, User adjustable variable rolloff
6dB/oct 70 to 600Hz
# SCCUT1 .............. $535.00
Hollow Foam-Type Windscreens
W5D – For use especially on
pressure-gradient transducers in
windy environments
# SCW5D ................ $82.00
B5D- For use especially on pressuregradient transducers in light wind
and as a close-speech guard.
# SCB5D .................. $54.00
# SEMKH50 ........................................ $1,329.95
SE300B w/CK93 Capsule
Blue Line Modular Microphone System
The Blue line modular microphone system is comprised
of the SE 300 B power supply module and a family of
specialized condenser capsules. The Blue Line microphones
exhibit accurate axial response and uniform pattern control.
Self noise and maximum operating levels are exemplary,
creating a very wide usable dynamic range for the most
demanding operations. This flexible modular system is ideal
for both studio broadcast and location sound applications.
SE 300 B
The compact SE 300 B powering /output assembly
provides for 10 dB of attenuation for operation at high
sound pressure levels and a transformer less output
stage ensures pristine, full-range audio without
low-frequency distortion
• 12dB/oct low cut filter at 75 Hz for to eliminate rumble
• Positive-action Modulock bayonet capsule mounting system
• Stand adapter included
SE 300 B with CK93 capsule
The SE 300 B/CK 93 combo matches the low noise, high
output SE 300 B powering unit with the CK 93
hypercardioid condenser capsule. Particularly well-suited for location
sound, the CK 93 provides excellent off-axis rejection and has a
virtually ruler-flat frequency response.
Blue Line Series Capsules
• Capsule designs employ gold sputtered diaphragms
• High sensitivity
• High acoustic level capability
CK 91- Cardioid condenser capsule
CK 94- Bi-directional (figure-of-eight) condenser capsule
CK 98- Shotgun capsule, high directivity
# AKC480BCK63 .......................................... CALL
*Additional capsules and accessories available
219
AUDIO FOR VIDEO
800.947.9923 ( 212.444.5023
SHOTGUN MICROPHONES
SGM-1X
®
Shotgun Microphone
Features
• 11.8” supercardioid • Low noise (-65db)
• Wide frequency response (80Hz-18kHz)
• Balanced low impedance (680ohm) XLR output
• Switchable low-cut filter
• Integrated shockmount attaches to
camera shoe or mic stand
• Plug into the 41XT transmitter to make
a wireless shotgun mic
• Includes foam windscreen
• 1 “AAA” battery (lasts approx. 1000 hours)
AT-897
Modular Condenser Mic System
Short Shotgun Mic
K6 Modular Microphone Handgrip and Power Supply - designed
to power any capsule in the K6 line. Runs on 12-48 volts phantom
power or up to 150 hours with an AA battery. Integrated bass roll-off
and on/off switches with battery status LED. Matte black, anodized,
scratch-resistant finish.
The AT-897 is a wide range Short shotgun mic with a narrow
acceptance angle desirable for long distance sound pickup.
Uniquely suited for both On-Camera and boom use
in TV and film production, ENG, recording
and similar applications requiring
excellent sound rejection from
the sides and rear.
ME66 Short Shotgun Capsule - is ideal for interviews in crowded
situations, as a camera microphone for electronic news gathering.
Frequency Response 50 - 20KHz (±2.5 dB)
SGM-2X
®
91 (
K6 Series
ME67 Long Gun Shotgun Capsule - designed to be used where the
mic must be placed at a distance from the sound source.
Frequency Response 40 - 20KHz (±2.5 dB)
# AZSGM1X ...........................................$149.95
VIDEO QUICK
DIAL
• Frequency response 40 - 20 kHz
• Low-Frequency Roll Off • Phantom or Battery operation
• 1200 hours on a single AA • Only 11.02” long
• Supplied with Windscreen and Mic Clip
# AUAT897 ............................................$279.95
MKH-416 P48
AT815b
Shotgun Microphone
Shotgun Microphone
Long Shotgun Microphone
Features
• 2 barrels - an 8 1/8˝ omni-directional barrel and an
extension barrel to make it a 15 3/4˝ super-cardioid
• Integrated shockmount attaches
to camera shoe or mic stand
• Switchable 6dB/Octave low-cut filter @ 200Hz
• 1000 Hours w/Alkaline AAA Battery
• XLR-balanced output
• Includes 2 foam windscreens
• AAA battery and cable not included
• 100Hz-18kHz frequency response
A high-end shotgun microphone offering highly accurate sound
reproduction and a rugged weather-proof design. The pressure
gradient and short interference tube principals allow a wide frequency
response with a hypercardioid polar pattern in the low and mid
frequencies while an even tighter lobar pattern is achieved above
2kHz. Ideal for long distance miking for film and video or as an ENG
or lecture microphone.
Features
• High sensitivity, low self-noise • 128dB @ 1kHz maximum SPL
• 48 V phantom power required • Optional MZA-14P48U 48V battery
power supply • 40Hz - 20kHZ frequency response
• Designed for professional recording,
broadcast and film/TV/video with a
narrow acceptance angle and excellent
sound rejection from the sides and rear of mic.
• Condenser element • Line & Gradient polar pattern
• 115 dB maximum SPL w/ battery power
• 130 dB maximum SPL w/ phantom power
• Bass roll-off switch • 16.5” long • Powered by 9 - 52 V
phantom power or single “AA” battery
Includes Mic clip, “AA” battery, windscreen & protective case
# SEMKH416P48 .................................. $1,099.95
# AUAT815B...........................................$279.95
# AZSGM2X ...........................................$149.95
®
SGM-1000
AT4073A
ENG-618
Shotgun Microphone
Integrated Boom Pole/Shotgun Microphone
Short Shotgun Mic
Features
• Phantom Powered 12 - 48 volts
or 1.5 battery
• High performance
mic element
• Small size - 12.2 inches
• Highly directional pickup pattern • XLR Output
• Switchable low cut filter
• New shock mount with integrated shoe mount
• Foam widescreen included.
# AZSGM1000 ........................................$299.95
The ENG-618 is an integrated boom pole/
shotgun microphone (with preamp), designed
for broadcast news gathering and remote
applications.
• Designed for critical long-distance pickup in broadcasting,
film/TV production and theater sound reinforcement
applications
• Direct-coupled, balanced output ensures a
clean signal even in high-output conditions
• Patented acoustic design provides same
directivity as mics up to 50% longer
• Switchable 150 Hz hi-pass filter
• Rugged housing made of lightweight structural-grade
aluminum alloy • 30Hz - 20kHz frequency response
• 9.1” long
• Balanced, Lightweight Design
• Powers via Phantom or 9V Battery
• Boom extension From 18” inches to 6 ft.
• Includes Custom Designed Carrying Case
# ELENG618................................. CALL
CMIT5U
# AUAT4073A .........................................$549.95
MKH-60
AT4071A
Shotgun Microphone
Short Shotgun Mic
Long Shotgun Mic
• Supercardioid polar pattern
• Superior RF immunity
• Low colorization of off-axis sound
• (3) pushbutton-activated filters with LEDs
• Lightweight, blue anodized all metal housing
• Includes: SG 20 swivel joint, W 140
windscreen and wooden carrying case
• Frequency response: 40Hz-20kHz
• Interference tube (short gun)
microphone with super-cardioid/lobar
pick-up pattern provides high directivity
throughout the whole frequency range
• RF condenser element offers high sensitivity with exceptionally
low inherent self-noise–requires 48V phantom power (±4V)
• Very lightweight, rugged and weather-proof
• Switchable 10 dB pad • Switchable roll-off filter (5 dB at 100 Hz) and
treble emphasis (5 dB at 10 kHz) • Infrasonic cut-off filter (-18 dB/oct.)
• 60Hz - 20kHz frequency response
• 125 dB Max SPL (142 dB with pad)
• Ideal for film and news gathering applications
• Designed for critical long-distance
pickup in broadcasting, film/TV production
and theater sound reinforcement applications
• Direct-coupled, balanced output ensures a clean
signal even in high-output conditions
• Exclusive acoustic design provides
same directivity as mics up to 50% longer
• Switchable 150 Hz hi-pass filter
• Rugged housing made of lightweight structural-grade
aluminum alloy • 30Hz - 20kHz frequency response
• AT4071A- (15.5” long)
NEW!
# SCCMIT5U ........................................ $1795.00
Neumann
# SEMKH60 ........................................ $1,499.95
KMR-81i
# AUAT4071A ............................................. CALL
MKH-70
Short Shotgun Mic
Long Shotgun Mic
• Interference tube with super-cardioid/Lobe polar pattern
• Frequency independent directivity within a pickup angle of 90°
• Very high output capability and a remarkably low self-noise
• Balanced center of gravity for easy handling
• Requires 48 V phantom power (±4 V)
• Switchable 10 dB pad • Switchable 200Hz high-pass fi lter
attenuates low frequency signals15 dB at 50 Hz.
• 20Hz to 20kHz frequency response
• 128 dB Max SPL (138 dB with pad)
• Highly directive interference tube
(long gun) mic with lobar pick-up pattern
• RF condenser element offers high sensitivity
with exceptionally low inherent self-noise
requires 48V phantom power (±4V)
• Very lightweight, rugged and weather-proof
• Switchable 10 dB pad • Switchable roll-off filter (5 dB at 100 Hz)
and treble emphasis (5 dB at 10 kHz) • Infrasonic cut-off filter
(-18 dB/oct.) • 60Hz - 20kHz frequency response
• 125 dB Max SPL (142 dB with pad)
• Ideal for boom-mounting in film and news gathering applications
# NEKMR81I .............................................. CALL
# SEMKH70 ........................................ $1,659.95
SM89
Shotgun Condenser Microphone
The SM89 is a highly-directional shotgun microphone
designed for location film/TV production, theater sound
reinforcement, and spot pickup applications.
• Highly-directional polar pattern
• Two low-cut frequencies
• Extremely Lightweight Design
• Frequency Response: 60Hz-20kHz
# SHSM89 .............................................$707.95
MARCH 2006
220
AUDIO FOR VIDEO
www.bhphotovideo.com
VIDEO QUICK
DIAL
91 (
AT-835B
SHOTGUN MICROPHONES & ACCESSORIES
Shotgun Condenser Microphone
Stereo Shotgun Condenser Microphone
M/S Stereo Shotgun Microphone
The AT835b is a wide-range
condenser microphone with a line
+ gradient polar pattern, designed
for video production and
broadcast applications.
• Operates on Battery or Phantom Power
• Switchable Low-frequency Roll-off
• Frequency Response: 40Hz-20kHz
• Includes: Stand Clamp, Windscreen and Carrying Case
The AT835ST is a stereo shotgun mic with a
switch-selectable, non-matrixed
M-S mode and two internally
matrixed modes.
• Independent Line-Cardioid
and Figure-of-Eight
Condenser Elements
• Switchable Low-frequency Roll-off • Frequency Response:
40Hz-20kHz • Includes: Stand Clamp, Windscreen, 5-pin XLR
to (2) 3-pin XLR Cable and Carrying Case
The MKH 418 S is an M-S stereo shotgun
microphone using Sennheiser’s exclusive RF
condenser technology. It is ideally suited for film,
radio, television and reporting applications.
# AUAT835B...........................................$239.95
# AUAT835ST .........................................$599.95
# SEMKH418S ..................................... $1,199.95
NTG-1
• Very low noise, high SNR
• Polar Pattern-M: Supercardioid/lobar, S: Figure 8
• Dual Channel 5-pin XLR Output
• 130dB SPL
• Frequency Response: 40 - 20,000 Hz
NTG-2
SGM 1
Shotgun Condenser Microphone
Shotgun Condenser Microphone
Short Shotgun Microphone Kit
The RODE NTG-1 is a
lightweight condenser shotgun
microphone, specifically designed
for professional film, video,
television and voice-over applications.
• Super-Cardioid Polar Pattern
• Ideal for Camera mounting
• Frequency Response: 20Hz-20kHz
• Includes: Stand Mount, Windscreen and Zippered Pouch
The NTG-2 is a lightweight
condenser shotgun microphone
that operates either from an
internal 1.5 V battery (“AA”) or
phantom power.
• Ideal for Mounting Directly to Video Cameras
or On Boom Poles • Super-Cardioid Polar Pattern
• Frequency Response: 20Hz-20kHz
• Includes: Stand Mount, Windscreen and Zippered Pouch
The PSC shotgun microphone
kit includes everything needed for
professional audio reproduction
on video shoots or general field
audio capturing applications.
Includes: • SGM1 Microphone
• Foam Windscreen • Koala MiniMax High Wind Fur Cover
• Special SGM1 Shockmount • Offset, High-rise Camera
Shoe Adapter • Boom Pole Adapter
# RONTG1 .............................................$229.00
# RONTG2 .............................................$249.00
# PSSGM1.............................................$299.00
ECM-674
ECM-672
ECM-678
Short Shotgun Condenser Microphone
Shotgun Microphone
Short Shotgun Condenser Microphone
The ECM-674 is a compact, lightweight shotgun condenser
microphone designed for use with camcoders. It is ideal for
Sony’s HDV, DVCAM and XDCAM camcorder lines.
• Powers via external DC power (40 to 52V)
or internal “AA” battery
• Built-In Two Position
Low-Cut Filter
• Frequency Response:
60Hz-18kHz
The ECM-672 is a lightweight, short shotgun microphone
designed for use on today’s full size video cameras.
Features
• Lightweight, compact, and high
performance electret condenser
• Approx. 3000 hours of consecutive
operation with an AA-size battery.
• 2-way powering
• Built-in 2-position low-cut switch
• Frequency Response 50Hz - 16kHz
The ECM-678 is a camera short shotgun microphone
designed for use in broadcast, professional video, film,
and field audio applications.
• Camera and Boom
Pole Mountable
• Super-Cardioid
Polar Pattern
• Two Position Low-Cut filter Switch
• Frequency Response: 40Hz-20kHz
• Compact Design only 9.9” Long
# SOECM674 ..........................................$299.95
# SOECM672 ..........................................$485.95
# SOECM678 ..........................................$599.95
CS-3E
CS-1
Short Shotgun Condenser Mic
Short Shotgun Microphone
The CS-1 employs the same technology as previous
Sanken mics in a new, smaller, ultra-compact housing.
Measures only 7 inches in length and weighs only
3.5 ounces, making it ideal for on camera or boom
pole operation.
• Very sharp directivity in a compact 7” body
• Narrow angle directivity in all frequency ranges
• High SPL - greater than 137dB SPL with no distortion
• Flat frequency on-axis response beyond 20kHz
• Sanken original square-type DC-biased condenser capsule
• Supercardiod pattern
• Ideal for field recording
• Eliminates proximity effect and
maintains sharp directivity
• Switchable Low frequency
rolloff -3dB at 100Hz
• Compact, lightweight design
• Standard 19mm diameter
• Lusterless black finish
• Frequency response: 50Hz-20kHz
# SACS3E............................................ $1349.95
# SACS1 ...............................................$795.00
Shotgun Windscreens
MARCH 2006
MKH-418 S
AT-835ST
SG Series
Hi quality replacement wind screens for shotgun mics. Made from
acoustical hypo-alergenic SonicFoam. It is washable, long lasting
and keeps original shape.
SG-1 – For mics up to a .75” diameter x 7.5” long
(Audio Technica 4073a, Neumann KMR81I,
Sennheiser MKH416, ME66) ...................................................... $24.95
SG-2 – For mics up to a .75” diameter x 11.5” long
(Audio Technica 4071a, 835b Neumann KMR82I,
Sennheiser ME67, ME80) .......................................................... $29.95
SG-60 – For mics up to a 1” diameter x 6” long
Sennheiser MKH-60, Sony ECM-672 ......................................... $24.95
SG-70 – For mics up to a 1” diameter x 6” length
(Sennheiser MKH-70) ................................................................ $29.95
SG-200 – For mics up to a 1” diameter x 4.75” long
(most on-camera shotgun microphones) .................................. $19.95
BG Series
The BG Series windscreen is a High Quality,
cost effective windscreen for High Wind/Harsh
Environment applications. Made from extra
thick acoustical hypo-alergenic SonicFoam.
BG-1 – For mics up to a .75” diameter x 7.5” long
(Audio Technica 4073a, Neumann KMR81I, Sennheiser
MKH416, ME66) ........................................................................ $26.95
BG-2 – For mics up to a .75” diameter x 11.5” long
(Audio Technica 4071a, 835b Neumann KMR82I,
Sennheiser ME67, ME80) .......................................................... $31.95
BG-60 – For mics up to a 1” diameter x 6” long
Sennheiser MKH-60, Sony ECM-672 ......................................... $26.95
BG-70 – For mics up to a 1” diameter x 6” length
(Sennheiser MKH-70) ................................................................ $31.95
Shotgun Windscreens
# MZW-64 for ME-62 & ME-64 ............................... $22.95
# MZW-66 for ME-66 .............................................. $36.95
# MZW-67 for ME-67 .............................................. $42.50
# MZW-415 for MKH-416 ....................................... $42.95
Pro Series Windscreens
Black velour coated foam windscreens
offer even greater protection for reducing
wind and popping noise.
# MZW-64P for ME-62 & ME-64 Black ................... $29.95
# MZW-66P for ME-66, Black ................................. $64.95
# MZW-67P for ME-67, Black ................................. $96.50
Equalizer
• Low cost version of the Lightwave Miniscreen
• Features the same hollow shell interior and
fabric mesh design and front and rear mic
gripping disk system as the Miniscreen
• The outer construction is made with a 25mm
length ultra fine synthetic fur as is used to make the Super and
Miniscreen Windmaster covers. • Delivers excellent dialog recording
in all ENG and EFP applications, with superlative wind protection even under extreme wind conditions.
EQ-102 – for Canon XL-1S................................................ $120.95
EQ-104 – for Sony PD-150, Audio Technica AT-4073,
Neuman KMR-81............................................... $120.95
EQ-106 – for Azden SGM-1X, Sennheiser ME66-K6,
MKH-416, MKH-60............................................ $120.95
EQ-107 – for Azden SGM-2X, Audio Technica AT-835B .... $130.95
221
AUDIO FOR VIDEO
800.947.9923 ( 212.444.5023
WIND PROTECTION & SHOCK MOUNTS
Miniscreen
High Performance Windscreen System
• Fabric/mesh slip-on windscreen for professional film and
video applications. • Patented dead air space design with a
small slip on screen provides far superior wind protection
over standard windscreens (20 dB or more) and a sweetened
mid-range that delivers enhanced dialog clarity
• Mini Windmaster – (optional) deep pile 1 fur zipped cover
for the miniscreen provides maximum wind blocking
• MiniSock – (optional) is a Miniscreen zipped cover that affords
high wind protection while maintaining sound transparency.
102 – for Canon XL-1S..........................................................................$140.00
104 – for Sony PD-150, Audio Technica AT-4073, Neuman KMR-81 ...$140.00
106 – for Azden SGM-1X, Sennheiser ME66-K6, MKH-416, MKH-60 ..$140.00
107 – for Azden SGM-2X, Audio Technica AT-835B..............................$150.00
• Softie windshield and shock mount designed to
offer wind attenuation comparable to a standard
Rycote windshield.
• The Softie windshield consists of an acoustic foam
base covered with a specially designed synthetic fur
• Shock mount has its own bracket & can be used as
a pistol grip or boom mounted.
• Softie fronts, without the pistol grip and shockmount, are
also available for use with camera-mounted microphones
• A Softie Mount with Pistol Grip, Boom Adapter or Shoe Mount can also
be purchased seperatey (Available with Small, Medium or Large hole)
• The optional XLR Clamp helps secure loose XLR connections to the
boom pole when used with Boom Adapter
• Available in 12, 18, 24, 29 and 32 cm lengths with three
diameters to fit most popular mics
Long Hair Wind Muffs
Long hair wind muffs greatly reduce high velocity windnoise when used with MZW series blimp windshields and
MZS-20-1 pistol grip/shock mount
MZH60-1(for ME-66, MKH-416/MKH-60) ........$189.95
MZH70-1 Requires MZW70-1 “blimp” windscreen.
(for ME-66/ME-67 and MKH-70 ..... $199.95
WindBoss
Windshield System
The WindBoss is a universal
Shockmount/Windshield
system made of a lightweight,
rugged aircraft aluminum frame,
an open cell foam shell and a synthetic fur cover. End caps
allow easy mic access at both ends of the windshield.
Available in 2 sizes (13” & 16”) providing wind/shock
protection for a multitude of microphones.
# PSWSWBS ..........................................$294.95
# PSWSWBM .........................................$309.95
Blimp System
The blimp system is available in 8 sizes and
consists of three components resulting in the
best shock isolation & wind protection
Modular suspension
• Lightweight suspension with a high precision
modular frame
• Includes both pistol grip and boom adapter
Windshield
• Up to 25dB exterior wind attenuation • Lightweight and durable
• Slide-on / slide-off system for easy removal of mic and suspension
Windjammers
• Provides an extra 10-12dB protection over a standard windshield
• Specially designed materials with virtually no adverse effects on
sound level or quality
Rigid Blimp Windshields
MZW60-1 f/ME66/MKH-416/MKH-60 .................. $294.95
MZW70-1 for ME-67/MKH-70.............................. $329.95
91 (
Softie Windshields
Blimp System
Shockmount Pistol Grip
MZS20-1 shock mount, pistol grip and stand adapter
for K6 and MKH Series Mics ...... $329.95
VIDEO QUICK
DIAL
Windpac
Lightweight Blimp System w/Shock Mount
The DPA Windpac is an ultra-lightweight,
multi-mic compatible, collapsible wind proofing
solution for professional location recording.
• Ultra-Lightweight, Weighs Just 9.5oz
• Blocks Wind Noise in Gusts of
Up to 38 m/s (85 mph)
• Supplied with a Mono Cable
and Belt Pouch
WINDPAC-M-Mics up to 11.8” in length
WINDPAC-L-Mics up to 16” in length
# DPWINDPACM......................................$799.95
# DPWINDPACL ......................................$799.95
Multi Mount v2
Rycote Hot Shoe Extender
Zeppelin
Camera Shock Mount
Lightweight and durable, the new K-Tek
Zeppelin Fuzzy windscreen/shock mount
is ideal for ENG and EFP production.
Pole Mount and Shoe Mount models
are available
Internal bore: Short-6 1/4”, Medium-8 1/4”, Long-11 1/2”
• Multi Mount is a modified Softie Mount
with An integral accessory shoe that
allows for camera hot-shoe mounting
and includes a female 3/8” threaded brass
insert suitable for stand and pole mounting
• Isolates your camera-mounted microhpone
from vibration and movement
• Available in three sizes to fit 19/20mm,
21/22mm and 25mm diameter microphones
The Hot Shoe Extension allows
you to fit multiple attachments
to your single hot shoe on
your camera/camcorder.
The Hot shoe Extension
allows you to rotate the
attachment 360°
around the shoe
fixture on the camera.
• Length of bar: 4”
• Weight: 1.7oz
• Thread used: 3/8”
Whitworth male (brass)
# RYMM ................................................ $85.00
# RYHSE ................................................ $24.95
Pole Mount - Shock Mount/Windscreen
Short # KTZFZS, Medium # KTZFZM, Long # KTZFZL
$249.95 each
Shoe Mount - Shock Mount/Windscreen
Short # KTZCAMFZS, Medium # KTZCAMFZM, Long # KTZCAMFZL
$185.95 each
Minimount
Microphone Mount Systems
• Low profile and lightweight microphone mounts
available for a variety of mounting applications
• Top cradle section constructed of
anodized aluminum
• Isolation design allows the microphone float
without ‘flopping’ around
• Holds any light to medium weight
microphone in the 19mm to 30mm diameter
range using a screw down arm clamp that
allows fast changeover between mics
• Modular design allows the mic isolation assembly
to be detached and adapted to any of the available
lower section mounts
SM3
Suspension Shock Mount
MM-XL
MM-USC
Available Minimount Systems
• MM-USC
For camcorder shoe. Fitted with universal
shoe carriage for camcorders with a hot shoe
attachment ................................................. $165.95
• MM-XL
For the Canon XL-1 or Sony cameras with a round
27mm mic mount/clamp .......................... $125.95
• MM-PGC
With pistol grip handle
Fitted for hand-held use ............................. $165.95
• MM-BSC
For mic boom. Fitted with swivel assembly carriage
w/ 3/8” threaded base. ............................... $165.95
• MM-500
With special screw-on attachment for use with the
JVC GY DV500 camcorder ........................ $125.95
• MM-25
For camcorder split clamp. Fitted with a 25mm
x 45mm camcorder clamp carriage for use on
camcorders that have 25mm diameter microphone
clamps ......................................................... $85.95
The SM3 shock mount is designed
with a 2-way mounting system with
1/4”x 20 and 3/8” 16 internal threads
for boom pole and a standard hot
shoe adaptor for direct camera
mounting.
• 4-way Rubber Suspension System
• Quick Release Tilt mechanism
• Very Small Profile
NEW!
# ROSM3 ............................................... $49.95
®
NEW!
SMH-1
Camera Shoe Shockmount
The SMH-1 features a single piece
housing with flexible bands to hold
the shotgun securely and isolate it
from unwanted vibration and noise.
It has a built-in shoe mount and
standard 3/8” threads on the bottom
of the holder for mounting to a boom pole or tripod.
• Universal, works with most all cameras and shotgun microphones.
• Easy to use, simple, compact, one piece, sturdy construction.
• Isolates microphone from vibration and noise.
• Built-in (male) shoe mount adapter.
# AZSMH1 .............................................. $29.95
Camera Mic Mounts
Mic Mount 1- Camera Mic Mount
with Threading for Sony BVW
and SX Cameras
Off-Set Shoe Extender
Mic Mount 2- Camera Mic Mount
with Threading for Sony DXC
and Dockable Cameras
The Off-Set Shoe Extender is designed to
relocate the shoe mount backward or
forward, while at the same time raising
its height to better accommodate
shotgun microphones and wireless
transmitters. Locks into cameras
shoe with an adjustable
thumb screw.
# GBMICMNT2 ....................... $59.95
# KTKOSE .............................................. $58.95
# GBMICMNT1 .........................$59.95
MARCH 2006
222
AUDIO FOR VIDEO
www.bhphotovideo.com
VIDEO QUICK
DIAL
91 (
BOOMPOLES & ACCESSORIES
BoomPoles
Beyerdynamic
Beyerdynamic
Gitzo
Gitzo
K-Tek
K-Tek
K-Tek
K-Tek
K-Tek
K-Tek
K-Tek
K-Tek
K-Tek
K-Tek
K-Tek
K-Tek
K-Tek
K-Tek
K-Tek
Lightwave
Lightwave
Cavision
PSC
PSC
PSC
PSC
Model
MZA717
MZA718
G556C
G557C
K-56
K-56CC
KE-69CC
KE-79
KE-79CC
K-81
KE-89CC
KE100
KE-100CC
KE-102CCR
KE110CC
KE110CCR
K-152CC
K-152CCR
K-202CC
GT-10
GT-10C
SCPN-525R
FBPSCC
FBPMCC
FBPLCC
FBPXLSC
KA-113
Material
Aluminum
Aluminum
Fiber
Fiber
Fiber
Fiber
Aluminum
Aluminum
Aluminum
Fiber
Aluminum
Fiber
Fiber
Fiber
Aluminum
Aluminum
Fiber
Fiber
Fiber
Aluminum
Aluminum
Fiber
Fiber
Fiber
Fiber
Fiber
Max
60”
126”
83.4”
108.2”
49”
49”
69”
78”
78”
83”
89”
105”
105”
105”
110”
110”
153”
153”
193”
116”
116”
98”
73”
100”
149”
207”
Min
24”
36”
31.9”
32.7”
17”
17”
29”
19.2”
19.2”
36”
29”
26”
26”
26”
31”
31”
36”
36”
37”
30”
30”
26”
20”
26”
36”
51”
Sections
3
6
3
4
5
5
3
6
6
5
4
5
5
5
5
5
5
5
5
5
5
6
5
5
5
5
Cabled
–
–
–
–
–
Bottom exit
Bottom exit
–
Bottom exit
Side exit
Bottom exit
–
Bottom exit
Side exit
Bottom exit
Side exit
Bottom exit
Side exit
Bottom exit
–
Bottom exit
Side exit
Bottom exit
Bottom exit
Bottom exit
Bottom exit
Weight
.77 lb.
1.90 lb.
.79 lb.
1.15 lb.
1.0 lb
1.0 lb
1.1 lb
1.4 lb
1.18 lb
1.2 lb
1.0 lb
1.3 lb
1.6 lb
1.8 lb
1.46 lb
1.8 lb
2.0 lb
2.2 lb
1.87 lb
1.87 lb
N/A
.687 lb
.875 lb
1.2 lb
1.7 lb
Articulated Boom Pole
Price
108.95
163.95
149.95
179.95
344.95
474.95
149.95
174.95
209.95
509.95
179.95
309.95
408.95
408.95
229.95
239.95
659.95
689.95
804.95
175.95
229.95
309.95
454.95
498.95
618.95
755.95
• Hybrid composite, high density graphite fiber
for maximum strength and minimum weight
• 4 telescoping sections before the joint and
two more after providing a reach of nearly 9 1/2”
• 5 locking positions provide articulation at
90, 112.5, 135, 157.5, and 180 degrees
• A two person interview can be done with the boom
pole base on the floor (or operators toe) and the
articulated section positioned above the talent
# KTKA113 .......... without cable................................. $639.95
# KTKA113CCR ... with coiled cable ........................... $799.95
Boompole Holders
Boom pole holders attach to
Avenger/Mathews grip heads
and conveniently mount boom-poles
to lighting or C-stands. This allows
hands-free use of boom poles which
are particularly useful in a single man
operation or where microphone
placement will remain stationary.
# GBBPH..................................................... $29.95
# BOBPH..................................................... $64.95
Size and Weight Approximate
Boom-Audio
Kit Cool
Boom Support System
The Kit Cool is a unique device that allows a
boompole to be supported by one hand
reducing arm/back strain and fatigue, as well
as leaving the other hand free to operate the
controls of a mixer etc. It features a cradle
made of foam-covered rollers, allowing the
boom to be positioned and moved in all directions
without vibration.
# BOKCS ...............................................$384.95
K-HGW
Universal Pistol Grip
# REGRIP ............................................... $34.95
Adjustable Boom Cradle
• The lightweight K-HGW Wired Handgrip consists
of a K-Tek boom pole head, six inches of K-Tek
boom pole graphite covered with foam, and
a male XLR connecter with
two female 3/8x16 mounting threads.
• Internally wired with soft cloth covered quiet
cable fitted with the K-Tek short profile Female
XLR microphone connecter.
• Provides six inches more reach and hardly weighs anything.
• Mechanically isolates the pole from the mount
and provides the soft cloth covered wire pig tail
The Boom Pole Cradle attaches to
standard light stands with a 5/8” stud,
and allows hands free boom operation.
Position of the boom can be adjusted via
the Double Ball Joint.
No additional hardware is required to
mount it on the stand.
(C-Stands are recommended)
# KTKHGW ............................................. $92.95
W!
MARCH 2006
Boom Tube cases are made from an impact- NE
resistant shell that is seal tightly when closed,
and include carrying straps and lockable clasps
• Boom Tube for Poles 16”-32”
# BO10032BTL.......................... $59.95
• Boom Tube for Poles 16”-36”
# BO10036BTL.......................... $59.95
• Boom Tube for Poles 37”-46”
# BO10046BTL.......................... $69.95
• Boom Tube for Poles 47”-55”
# BO10055BTL.......................... $69.95
# ATBPC ................................................ $74.95
Right Angle XLR Cables
• High grade professional XLR cables with
Neutrik connectors.
• Male to 90º right angle female connectors
designed for professional boom poles
or on-camera microphones.
Straight Cables
# AUAT83141.5R . 18” ................................................. $17.48
# AUAT831420R .. 20’ .................................................. $20.95
Coiled Cables
# RECAXJCOIL2 ... 4”-18”............................................. $35.00
# KTK18NK .......... 1.5’-9’ w/K-TEK Right Angle Connector ... $49.95
# KTK36NK .......... 3’-18’ w/K-TEK Right Angle Connector ... $64.95
BoomTube
Lockable Boom Pole Cases
Boompole Cradle
Wired Handgrip
Grip
• Universal hand grip adapts to any standard
microphone suspension
• Foam padded handle comes with a 3/8˝ threaded
adapter (boom pole standard) and is also threaded
at the base so it can attach it to a boompole.
• Allows you to hand-hold a PSC mount, AudioTechnica AT8415 etc., with increased isolation.
• Made from machined Delrin, stainless steel, and
expanded polyurethane to provide significant
additional shock isolation.
ATS-RAM
AT8415 / AT8415 Deluxe
Shock Mount
• Lightweight, low-profile design.
• Deluxe version features the K-Tek K-SUS
Suspenders that are made from a special
polymer and are designed to be very high quality
replacements for the standard rubber bands
• Will fit 19 – 25mm diameter microphones
AT8415 Deluxe
# AUAT8415D ............................................... $64.95
AT8415 Standard
# AUAT8415S ............................................... $49.95
Camera “Hot Shoe” thread adapter
# 3760057 ..................................................... $9.95
PM50sOB
Personal Monitor
The PM50sOB is a perfect device for
boompole operators who need to
monitor their own signal. It also has
a stereo line input that allows you to
monitor the entire mix. It features
Separate level controls for Line and
Mic, two headphone jacks and
operates on a single 9V.
# ROPM50SOB ........................................ $64.95
Universal Shockmount
• The “One Size Fits All” K-SM Shock Mount uses
two specially formulated polymer mounts to hold
onto the microphone.
• Accommodates mics with 19 to 25mm diameters.
• The mounts are attached to rugged, thin machined
aluminum arms for use with boom poles
• The optional K-BWC allows you to mount the
K-SM to the Canon XL-1 or Sony cameras with a round 27mm mic
mount/clamp
• The K-WA Windshield Adapter adapts the K-SM to mount inside
Rycote windshields.
• The K-SF Windshield Adapter adapts the K-SM to mount inside the
Sennheiser MZW60-1 windshield when used with K-WA.
# KTKSM ..............................................$119.95
223
AUDIO FOR VIDEO
800.947.9923 ( 212.444.5023
BROADCAST, STEREO & HEADSET MICS
Neumann
BCM-104
VIDEO QUICK
DIAL
91 (
Broadcaster
SM7B
Broadcast Condenser Mic
Condenser Microphone
Broadcast Dynamic Microphone
The BCM 104 large-diaphragm condenser
microphone is especially tailored to the
demands of professional radio announcing.
The has a cardioid pattern with internally
switchable proximity effect compensation.
A second switch allows the sensitivity
to be reduced by 14 dB.
• Flat frequency response up to 3 kHz
• Very low self-noise of 7dB • High SPL up to 138Db
• Dynamic range of 131dB • Integrated pop screen
#NEBCM104 ...................................................... $829.95
#NEBCM104K BCM 104 Voice-Over Kit ........... $899.95
The Broadcaster is a large diaphragm
end-addressed condenser mic designed
to deliver a warm on-air vocal sound.
Features
• Cardioid polar pattern with high 180° rear rejection
• Externally polarized 1” internally shock- mounted condenser
capsule • 20Hz - 20kHz frequency response • Ultra low noise
with a >114dB dynamic range • Fine mesh pop shield eliminates
plosives • Voice tailored low cut filter • Unique On-Air indicator
• Rugged and reliable • Includes: BM1 mic holder, ZP1 zip pouch
The Shure SM7B is a large diaphragm
dynamic microphone designed for
studio broadcast applications.
• Selectable Tone Controls
• Internal Suspension Shock Mount
• Improved Bracket Design
• Highly Effective Pop Filter
• Rugged Steel Construction
• Frequency Response: 40Hz -16kHz
Neumann
#ROB ........................................................................ CALL
#ROBK Broadcaster Voice-Over Kit .......................... $399.95
#SHSM7B ................................................ $349.95
#SHSM7BK SM7B Voice-Over Kit ............ $499.95
C4500B-BC
BCM-705
RE-20
Broadcast Dynamic Microphone
Broadcast Mic
Variable-D Dynamic Cardioid Mic
The BCM 705 is Neuman’s first
ever dynamic microphone, and its
second in the Neuman broadcast line.
• Super-Cardioid Polar Pattern
• Removable Integrated Wire
Mesh Pop Screen
• Frequency Response: 20 Hz -20 kHz
• Integrated Elastic Suspension
Features
• Large-diaphragm condenser microphone
designed for on-air radio announcers.
• Front-end firing capsule for clean line of sight
• 2˝ to 3˝ working distance with minimal proximity effect
• Multi-layer pop filter between the front grille and the capsule
• Superior electro-magnetic shielding
• 120 Hz roll-off and -20 dB pre-attenuation pad
• Voice Friendly — Requires no further processing after
the microphone • Greater than 135 dB dynamic range
• Superior electro-magnetic screening
• Includes H-100 spider suspension and foam wind screen
One of the world-standard
dynamic mics. A favorite among
broadcasters and engineers worldwide.
#NEBCM705 ............................................................ CALL
#NEBCM705K BCM 705 Voice-Over Kit ................... $699.95
Features
• Variable-D design and heavy-duty, internal P-pop
filter reduces proximity effect
• Internal element shock mount reduces vibration-induced noise
• Bass roll-off switch • Includes stand adapter
• Frequency response 45Hz to 18kHz
# AKC4500BBC ........................................... CALL
#ELRE20 ...............................................$399.95
#ELRE20K RE-20 Voice-Over Kit .....................$649.95
61900BG
Commentator Cough Drop
Microphone Muting Switch
VAC RE20
ProBoom Elite Microphone Arm & Riser
Pop Filter System
The Commentator is a multi
feed headphone junction
box and microphone
muting switch with status
indicator showing green for
“on air” and red for “off air”.
Output A is the live broadcast
feed. Output B allows the broadcaster to talk to his crew/
producer live, without being heard by the audience.
The 61900BG is an easily adjustable heavy-duty
microphone boom arm mounting system
designed for on-air broadcast or voice
over applications.It is equipped with
gold springs and an integrated XLR Connector
• Noise-Free Retracting/Expanding
Spring Loaded Arm
• Integrated Wire Extension/Connector
• 15” Riser that Secures to
Any Desk-top Surface Using the Mounting Flange
The Popless Voice Screens VAC-RE20 is
a pop filter designed for the Electro Voice
RE20 & RE27 broadcast microphones.
It attaches to the Electro Voice 309/A
shock mount (required) and features
a ball & socket joint for easy positioning.
Pop screens easily snap in and out,
allowing each DJ can have their own set
for their air time.
# PRCDCO .............................................$194.95
#OC61900BG ....................................................... $159.95
# POVACRE20.......................................... $35.95
AT822 & AT825
VP88
NT4
Stereo Microphones
Stereo Microphone
Stereo Condenser Microphone
These X/Y stereo condenser mics provide full, natural stereo
ambience in a compact, lightweight package. They are
equally suited for studio and field applications with a
portable DAT or mounted on a camcorder. The
AT822 is an unbalanced mic that runs on a AA
battery and the AT825 has a balanced outputand
runs on a AA battery or external phantom power.
Features:
• Dual cardioid mic elements • Switchable low-frequency roll-off
• 125 dB max SPL • Excellent channel separation • Full mono compatibility
AT822 includes a 1.7’ cable with stereo mini-plug connector, a 10´ cable with
two mono 1/4˝ connectors, gun-grip/stand clamp, camera shoe-mount adapter,
windscreen, battery and case #AUAT822 .....................................................$249.00
AT825 includes a 16.5´ cable with two standard 3-pin XLR connectors, stand clamp,
windscreen, battery & case. #AUAT825 .......................................................$349.95
A single point mid-side stereo microphone made to withstand
rigorous production environments. Phase accurate and natural
sounding for any stereo miking situation such as drum
overheads, sound effects gathering and live music recording.
Features
• Time-coherent Mid-side stereo condenser • Adjustable stereo
spread controls the amount of stereo effect • Mono compatible
• Switch selectable phantom or 6 V battery • Low-cut filter
• Includes windscreen, swivel adapter and Y cable
• 40Hz to 20kHz frequency response
Optional Accessories • A88SM isolation shock mount
• C110 25 ft. 5 conductor, long life extension cable
The Rode NT4 is a fixed; 90-degree X/Y
configuration stereo microphone designed
both professional studio and location
recording applications
• Phantom or 9V Battery Powered
• 143dB SPL
• Frequency Response: 20Hz -20kHz
• Custom Mini Stereo Jack and XLR Cables Included
• Custom Case, Shock Mount, Windshield and
Stand Mount Supplied
# SHVP88 .............................................$689.95
AT-892
# RONT4 ......................................... CALL
E6
NB-2
Headworn Omni Condenser Mic
EarSet Microphone
Headmic Adapter
The AT-892 is an ultra-lightweight headset condenser
microphone with an ergonomic under-ear design, and tiny
2.5mm capsule for minimum visibility. This low profile, high
performance mic provides extremely intelligible, natural audio
for stage and broadcast talent, lecturers, and houses of worship.
The E6 is an omni-directional EarSet
microphone designed to offer the highest
possible sound quality without the bulk
or appearance of conventional headsets.
Its wide frequency response choice of
colors make the virtually invisible E6 the
perfect solution for stage, house of
worship and presentation.
• Easily clips onto ear without making
adjustments or interfering with hairstyles
• Hardwired or Wireless connectors • Resistant to make-up and
moisture • Frequency Response 50Hz - 20kHz • Max SPL 135dB
A flexible adjustable
headset that allows
any lavalier mic to
be used as a headset mic.
The mic cable hides
into the construction
of the headband to
avoid access cable runs. The unobtrusive, flexible design
ensures a firm, comfortable fit.
• Available in multiple termination configurations and colors
• Industry-standard
sound quality
• Ideal for applications
requiring minimum visibility
# SENB2 ................................................ $57.95
MARCH 2006
224
AUDIO FOR VIDEO
www.bhphotovideo.com
VIDEO QUICK
DIAL
91 (
ENG MICROPHONES & ACCESSORIES
D230
635A & 635N/DB
Dynamic ENG Microphone
Dynamic ENG Microphone
Dynamic ENG Mics
The AKG D230 is an omni-directional hand-held dynamic
microphone designed for rough outdoor use — specifically
Electronic News Gathering.
Features
• Specially tuned frequency response
• Omni-directionalpolar pattern eliminates proximity effect
• Integral pop filter • Very robust metal housing
• 40Hz to 20kHz frequency response
• Extended length handle to accommodate StationID flag
• Internal shockmount for low handling noise
INCLUDES: SA44 stand adapter and integral windscreen
Nicknamed “The Hammer”, the 635A is the world’s
mostpopular ENG microphone – compact and rugged!!
Features
• Omnidirectional polar pattern eliminates plosives
and provides wide acceptance angle
• Four-stage pop and dust filter • Internal shock absorber
• Available in beige or flat black finishes
• 80Hz - 13kHz frequency response
# EL635A ...... Biege ........................................ $109.95
# EL635A/B ... Black ........................................ $109.95
Also available with neodymium magnet
with greater output and sensitivity
# EL635NDB ............. Black .......................................... $129.95
RE50B Features
• Omnidirectional polar pattern • Nearly indestructible
• Dyna-Damp shock mount offers extremely effective
handling noise isolation • Acoustalloy diaphragm material
for very smooth response over a wide frequency range
• Designed to withstand high humidity, extreme temperatures
and corrosive salt air
• Integrated four-stage pop-filter, windscreen and blast filter
Includes stand adapter, zippered vinyl, carrying pouch and
hard-shell case • 80Hz - 13kHz frequency responset
# AKD230.................................................. CALL
# ELRE50B ................................................ $159.95
RE50N/DB adds higher output neodymium element
# ELE50BND .............................................. $179.95
RE-16
AT-804
SM63 & SM63L
ENG Mics
Omnidirectional ENG mic
Dynamic Super-Cardioid Microphone
Compact, lightweight, durable mics with
a professional sound and appearance.
Patented mechanical isolation system
for low handling noise.
• Omnidriectional dynamic capsule
• 80 Hz to 20 kHz frequency response tailored
for optimum speech intelligibility
• Rugged VERAFLEX grille resists damage from drops and corrosion
• Built-in pop filter • Available with a 23cm extended handle
The AT804 is a wide range
dynamic microphone with
an omnidirectional pickup
pattern designed for use in
professional recording and
broadcasting. Its hardened
steel grille and die cast
case make the AT804 especially useful in field applications
where rugged construction is essential.
Frequency Response 50 Hz - 15 kHz
# AUAT804 ............................................. $89.95
The Electro-Voice RE16 is a dynamic supercardioid microphone designed to meet the exacting
demands of professional broadcast use. It features
a unique blast filter and exclusive non-metallic
diaphragm.
• Dynamic Super-Cardioid Microphone
• Bass-Tilt Switch
• Superior Noise Rejection
• Frequency Response: 80Hz-15kHz
# SHSM63..... champagne finish ............................. $118.95
# SHSM63L ... extended handle, champagne finish . $132.95
# SHSM63LB . extended handle, black finish ........... $132.95
Lenny’s
# LEMSQ ..............................................$114.95
MFTW
MF2W
2.25” Round Mic Flag .....................................................$26.95
2.5” Round Mic Flag .......................................................$29.95
2” Square Mic Flag..........................................................$24.95
2.25” Square Mic Flag.....................................................$24.95
2.5” Square Mic Flag.......................................................$29.95
Triangle Mic Flag .............................................................$29.95
MY-700
4104B
Commentator’s Lip Microphone
MF2B
• These blank microphone flags
will accept your graphics beautifully.
• High-Impact news grade construction
• High density foam inserts
• Available in Black or White
The Lenny’s Media Stand is
a multi-microphone holder
designed to hold up to
seventeen microphones with
flags for press conferences
applications. It fits onto the
top of any light stand, and no
mic clips are required.
# ELRE16 ..............................................$194.95
Microphone Flags
Media Stand
Press Conference Mic Holder
PIG-E-BAK
The Coles 4104B ribbon microphone has
emerged as an indispensable tool in mobile
news satellite units because of its unique
noise canceling characteristics.
• Special Lip Positioning Bar
• Cardioid Polar Pattern
• Low-Frequency Rolloff
• Removable Plastic Hygiene Shield
• Frequency Response: 60Hz-12kHz
# CO4104B ............................... $759.95
®
Press Boxes
6-Mic Pressbar (Black)
Double Microphone Clamp
PressPower2 Active Press Box
• Holds up to 6 microphones
(7 with center mic stand thread)
• Cost effective design for Press
Conference applications
• Side bars are notched at 45
and 90 degrees in either direction
• Main bar- (4) 5/8”-27 Male mounts
• Side bars- (1) 5/8”-27 Male mounts
The Mic-Eze PIG-E-BAK double
mic clamp, mounts mics to mics
for dual feed and adjusts for phase
cancellation. Dual vertical in-line
clamp set with a swing type center
attachment.
• Ideal for Press Conferences and ENG applications
• Securely Holds Mic in place
• Clamp Interior Padded with Rubber
# ONMY700 ............................................ $19.95
# MIPB .................................................. $34.95
The PRESSPOWER 2 is a
high-performance press
conference standard. It
features two mic/line inputs
with individual gain controls
and 16 transformer isolated
outputs that are individually switchable
for mic or line level operation. The unit can be powered
by 115/230VAC, (4) 9V batteries, or external DC supply
(12 - 36VDC) Case Included
CO1B
MARCH 2006
RE-50 B & RE50N/DB
MA12 & MPC10
Clamp-On Microphone Swivel (Ebony)
Microphone Mounting Clamps
Connect-on swivel adapter/clamp facilitates
installation of a second microphone with
standard 5⁄8”–27 threads to any floor or desk
stand with 5⁄8” or 7⁄8” dia. tubing. Adapter
piece can be removed and fastened to mic
mount for fast, easy set-up and take-down.
MA12 -The clamp is ideal for mounting
microphones to percussion instruments,
drums, brass and hard to reach areas.
#WIMA12 ..................................... $9.95
# ATCO1B...................................... $18.50
MPC10-”C” type, multi-position clamp,
fits 1.25” diameter tube or flat surface.
The thread insert rotates 90 degrees in
three positions. Soft rubber insert
prevents scratching.
#WIMPC10 ................................$14.95
# WHPP2 ........................................... $1,599.95
PB Series Passive Press Boxes
The PB Series are passive units that
distribute one line level input to
multiple mic level outputs. Each
output is transformer isolated,
provides excellent inter-channel
isolation, and is ground lifted to
help eliminate noise problems.
Available with 6, 12, or 24 outputs
# WHPB06 ..... PB 6- 6 outputs ............................ $289.95
# WHPB12 ... PB 12- 12 outputs ........................ $414.95
# WHPB24 ... PB 24- 24 outputs ........................ $688.95
225
AUDIO FOR VIDEO
800.947.9923 ( 212.444.5023
ENG/EFP FIELD MIXERS
91 (
MixPre
FMX-20
®
VIDEO QUICK
DIAL
FP-24
2 Channel Stereo Field Mixer
2 Channel Compact Field Mixer
2 Channel Stereo Field Mixer
• Two electronically balanced
XLR mic/line inputs
• Left/Center/Right
switches for inputs
• Two electronically balanced
XLR mic/line outputs for use
with pro cameras plus a stereo
3.5mm mini output for use with mini DV cameras
• 3.5mm stereo headphone output with level control
• Small rugged compact design
• Six hours of operation using a single 9V battery
• Two mic inputs with L/C/R panning
• 48 volts or 15 volts
phantom power
• Seven-segment, sunlightreadable LED meters
• “Unclippable” input peak
limiters with adjustable
limiter threshold (per input) and
dual mono or linked stereo limiter operation
• Dynamic range exceeding 110 dB; 10 Hz to 50 kHz audio bandwidth
• High-power headphone monitoring • Operates on two internal AA
batteries or external 5-17 VDC power • extruded aluminum chassis
• Two transformerbalanced mic
ins with L/C/R
mix positioning
• Headphone output
• 7-segment peak
output meters are readable even in direct sunlight
• “Unclippable” input peak limiters with adjustable threshold per input
• 11-12 hours using two AA alkaline batteries or 4-14Vdc power (PS40)
• 6dB per/oct low-cut filters at 80 & 160 Hz
• Selectable 15 and 48 volt Phantom Power
# AZFMX20............................................$269.95
# SHFP24..............................................$665.95
# SHFP24.................................................. CALL
302
DV PROMIX 3
FP-33
3-Channel Stereo DV Mixer
3 Channel Compact Field Mixer
Portable 3 Channel Stereo Mixer
The DV PROMIX 3
is a 3-channel stereo
mixer designed for
the DV Cam market.
• Balanced XLR Mic/Line
input/output connectors
• +48v Phantom power, switchable on each input
• Low Frequency roll off reduces wind noise
• Bright sunlight readable, LED meters
• Output limiters for camera overload protection
• Dedicated Microphone level output jack
• Convenient carry case and strap included
• 3 transformer-balanced mic or
line level inputs on XLR
connectors with input
trim, L/C/R panning
2-position HPF, phantom
power (48V or 12V)
• Limiters on inputs and outputs
• Sunlight-viewable LED meters
• Stereo & MS linking of channel 1&2 and on-board MS stereo matrix
• Active-balanced line/tape/mic level outputs on XLR connectors;
• Return input for monitoring • Powered by three AA batteries or
external 5 - 18 VDC • Durable extruded aluminum chassis
• Three XLR-balanced
mic/line inputs
w/ 48V/12V
phantom and 12V
T (A-B) power
• Two outputs
• Built-in oscillator
• Center detented pan pots for each input channel
• Two headphone jacks
• Tape out jack, and a monitor input for the headphone circuit
• Exceptionally low noise design and wide dynamic range
# PSDVPM3 ...........................................$469.95
# SO302 ............................................ $1,195.95
# SHFP33........................................... $1,274.95
X3
442
DMXP-01
3-Channel Mixer
Four Channel Field Mixer
Portable Digital Mixer
The Wendt X3 is a
3-channel field audio
mixer designed for
ENG/EFP broadcast and
remote audio recording
on location. (feature identical to the renowned Wendt X4
and X5 in a smaller, lighter 3-channel Package)
• 3 XLR Mic/Line Inputs • Balanced & Unbalanced Outputs
• Low-Cut Filter Switches • Tape Return Inputs
• Built In Limiter • Slate Microphone
# WEX3 ................................................$995.95
• 4 balanced XLR
mic/line switchable
inputs with variable
input trim, pan
and HPF; selectable
48v or 15v phantom
or “12T” power • Balanced line/tape/mic level output on XLR
connectors and Hirose connector • Peak limiters per channel • Onboard MS stereo matrix • Direct outputs and balanced line or tape
level output on TA3 locking connectors • 1/8 stereo tape level and 1/8
mono mic level outputs • Sunlight-viewable LED meters
• 2 return inputs for monitoring two-camera productions • Powered by
4 AA batteries or external 5 - 18 VDC
• 4 electrically balanced mic/line
inputs with switchable
48V phantom power
• 32-bit DSP, 24-bit A/D/A
with sample rates of
48 kHz or 96kHz
• Fully editable limiters on inputs and
outputs; compressors on outputs • 10 Scene Memory Recall locations
• Backlit LCD • XLR master outputs • AES/EBU and coaxial S/PDIF digital outs
• 12-pin camera send/return connector • Variable low cut filter
• 1/4 and 3.5mm headphone outputs • DC 12 V XLR 4-pin power connector or
up to 5 hours operation via eight AA-size alkaline batteries
# SO442 ............................................ $2,495.95
# SODMXP01 ...................................... $2,495.95
Alpha Mix
X4
MX-422
Four Channel Field Mixer
4 Channel ENG Mixer
Four Channel Field Mixer
• 4 electronically
balanced mic
inputs
• External power
(9-18v) or 15 hours
use with 8 x AA alkaline • Right and left VU meters
• Master fader control • Mixer Mode allows channels 1&2 to be
ganged for full stereo operation using channel 1 fader and the
channel 2 fader as a balance control.
• An accessory multi-pin connector provides balanced line outputs,
monitor returns and external power via an optional breakaway cable
• line/mic switchable XLR inputs
• 12T and 48V phantom power
• Individual balanced outputs,
PFL & 3 LED meters per input
• Two 3.5mm stereo line/mic
switchable auxiliary outs
• Two XLR balanced outputs
plus a balanced mono feed
• 4 pin Hirose external power
input; internal NP-1 battery support
• Provides power for up to 4 wireless microphone receivers
• Two Hirose 10 pin connectors • Individual or ganged output limiters
• Includes Porta Brace Case
The MX422 Field
Mixer is a 4-channel,
microphone/line
mixer with
balanced XLR
inputs and outputs.
• 4 XLR Mic/Line Inputs • Level and Pan control per channel
• 100 Hz Low Cut filters • 30dB pad switch
• Slate Mic & 20Hz slate tone button • Illuminated VU meters
• Auxiliary battery compartments, Never lose Power
# WEX4 ............................................. $1,699.95
# PSAM ............................................. $1,866.95
# ROMX422 ...........................................$499.95
DV PROMIX 6
X5
M367
Two Channel Field Mixer
Portable 6 Channel Stereo Mixer
6 Channel Microphone Mixer
• Two channel, low
noise mixer with
pan switches
(R/C/L), preamp
attenuation (10dB,
20dB and 0dB),
switchable limiter, and stereo LED VU display
• External power (9-18v) or 12 hours use with 6 x AA alkaline
• Cut Filter 6/6 • 48v PH, Dynamic, 12T mic powering
• Built-in tone oscillator and slate mic
• 1/4 & 3.5mm headphone outputs with volume control
• Mic/Line switchable XLR outputs • 3.5mm stereo tape return jack
The DV ProMix 6 is a
versatile, cost effective
six-channel ENG
& EFP mixer that
provides superquiet
pre-amplifiers, true
dual camera support,
dedicated individual line outputs, & switchable output levels.
• 6- XLR inputs w/dedicated individual line outputs
• Sun-light readable peak program meters • Powered via: 8x “AA”
Alkaline batteries or external power (10 to 18Vdc) • Weight: 3.5 lbs
• Designed for ENG
& EFP applications
• 6 XLR-balanced
switchable mic/line inputs
• Two XLR-balanced outputs; one selectable
mic/line output and one dedicated line output
• Low-noise circuitry
• Metal XLR connectors on both inputs and outputs
• Operates via AC or optional 9V batteries
# WEX5 .............................................. $2799.95
# PSDVP6 ..........................................................$1379.95
# SHM367 .............................................$599.95
MARCH 2006
226
AUDIO FOR VIDEO
www.bhphotovideo.com
VIDEO QUICK
DIAL
91 (
MM-1
ENG/EFP FIELD ACCESSORIES
DV PROMIX 1
HX-3
Mic Preamp w/ Headphone Monitoring
Mic Preamp w/Headphone Monitoring
Portable Headphone Amplifier
• Transformer-balanced input and output
• Maximum of 66 dB of gain, in eleven
discrete steps • Selectable 48-volt /
12-volt phantom power or “12T” power
• 6 dB/octave High-pass filter @ 80 or 160 Hz
• Headphone monitoring of mic, monitor, or both
• 1/4 TRS balanced monitor input • Dynamic range exceeding
120 dB; 10 Hz to 50 kHz audio bandwidth • Extended range
peak limiter via dual opto-isolators makes preamplifier virtually
“unclippable”• Excellent battery life with two AA alkaline or NiMH
rechargeablebatteries; External 5-17VDC powering (plug included)
• High-strength aluminum chassis with durable belt clip
The DV PROMIX 1 is a
flexible Mic preamp/
monitoring system
designed for location
sound professionals.
• Switchable 12T/48
phantom power
• Switchable limiters on
preamps and line inputs
• Power options: 2-9V batteries or external 7-16VDC
• Can be operated by optional Boom Pole Remote
• Three isolated 1/4 headphone outputs
with individual volume controls
• 125 dB dynamic range with flat
frequency response.
• Durable, All-metal, panel mounted connectors
• Stereo or mono monitoring • Peak LED indicates headphone
overload • Two balanced XLR line inputs or unbalanced 1/4 and 1/8
stereo inputs • Loop Output to connect additional HX-3’s in series
• Up to 18 hours from two AA alkaline batteries or access external
power (5 to 17 VDC)
• High strength, extruded aluminum chassis with protective metal
end panels
# SOMM1..............................................$349.95
# PSDVPM1 ...........................................$365.95
# PSBRCFDV1 boom pole remote ....................... $68.95
# SOHX3 ...............................................$285.95
BDS
Battery Bud
NP-1
Battery Adapter Cups
Battery Distribution Box
Battery Distribution
RENPADCL33
RENPADM4
Compact, Lightweight 1x3 DC Distribution Box with A Large
Assortment of Input and Output
Cables is Available for Various
Powering Configurations.
• (1) Input & (3) Outputs on
4-pin
Hirose Connectors
• Recessed On/Off Switch
• Detachable Belt-Clip
• 2.4” x 2” x 1.25”/ 3.7 oz.
NEW!
The Battery Distribution System allows you to use
a single Power Source/Rechargeable Battery
to power up to six devices like Mixers,
Wireless receivers and recorders.
• Locking connectors • LED power ON
indicator • Chassis mounted hardware
and circuit board assembly for strength
• Recessed master switch controls the power for your entire rig
• Benefits include: super quick battery changes; longer battery
run-time; save a fortune on disposable batteries
• Includes heavy duty belt clip
Single Pin for Shure FP33 and FP32A ............. $60.00
Single Pin for Shure FP32, FP31, Wendt X4,
Wendt X2, PSC M4, and PSC M4A+................ $60.00
RENPADCSD Single Pin for Sound Devices 442 with
serial numbers lower than 0303 and MixPre with
serial numbers lower than 0506...................... $60.00
RENPADCSQN 4-Pin Hirose for Wendt X5, PSC M4mkII, PSC M3,
PSC Alphamix, Sound Devices HX3, MM1, MixPre’s
with s/n greater than 0506, and Sound Devices 442’s
with s/n greater than 0303. ............................. $75.00
RENPADDAP1 NP-1 to DA-P1 power adapter cable. Allows powering
of Tascam DAP-1 with NP-1 style battery ..... $159.00
RENPADWX4 NP-1 to 4 pin XLR Female Power Adaptor ...... $60.00
# CABB001 ............................................$250.00
A Wide Variety of Power Input and Output Cables are available for this system
# REBDS ...............................................$170.00
HN-7506
Audio Adapter Kit
Noise Reduction Headset Monitor
Circumaural Closed-Back Headphones
This audio adapter kit
consists of a select group
of 46 adapters (22 types)
in one case for convenient
field use. The kit includes
a sturdy plastic storage
case with 10 compartments
created by a set of adjustable
dividers.
• Sony MDR-7506 drivers with special baffling
provide extreme isolation from high noise
environments such as helicopters, raceways,
rock concerts, etc. • Accurate, full-range
monitoring in loud environments and adds a
high degree of protection from hearing damage
while giving the user the familiar sound of the
industry standard Sony headphones
HN-7506 Headphones – Recommended for most situations. Lighter
clamping force makes the Standard Duty version more comfortable.
Boom Mic Option – Broadcast quality miniature dynamic boom mic
installed on headphones (terminates with 3-pin male XLR).
MDR7506s are an industry standard
headphone for ENG/EFP, broadcast and
professional recording applications.
• 40mm Neodymium Driver
• Compact, Foldable Design
• 1/4” Stereo and 1/8” stereo connectors
# SOMDR7506 ........................................$204.95
# COAAK ...............................................$149.95
Barrel Adapters / Problem Solvers
Mixer cables
# PSAPR .......Phase Reversal Adapter........................ $28.95
# PSA4812 .....48 Volt to 12T phantom power converter ... $38.95
# PSAGL .......Ground Lift Adapter .............................. $28.95
# PSALMP ....Line to Mic level Pad Adapter ............... $28.95
# PSALPF .....Low Pass Filter Adapter ........................ $37.95
# PSAHPF .....High Pass Filter Adapter ....................... $37.95
# PSA600......600 Ohm Transformer Adapter............. $39.95
Accessory - Cables and Interconnects
XL-1
TA3-F to TA3-F link cable for 442/302 to 442/302
linking; 6-inch; 442-specific. .................................... $21.00
XL-2
TA3-F to XLR cable; 15-inch; connects balanced TA3 to
XLR inputs; package of two cables; 442-specific. .... $45.00
XL-3
3.5 mm to TA3-F link cable for MixPre/MP-2 Tape Output
to 442/302 Mix In; 12-inch. ...................................... $21.00
XL-4
Bag of four (4) TA3-F (type) connectors ................... $21.00
Accessory - Power
XL-H
Bare Hirose HR10-7P-4P connector to mate with late
model MixPre, 442, and 302 DC inputs. ................... $18.00
XL-NPH NP-type battery cup with 12-inch cable terminated
in Hirose 4-pin locking DC connector (HR10-7P-4P)
at equipment end.For use with MixPre (s/n >0506)
and 442 (sn >0303).................................................. $62.00
Problem Solvers
Breakaway Cables (Harness)
PSAGL
PSAHPF
PSALPF
A15LA
PSALMP
PSAPR
A85F
A96F
A15BT
A15AS
MARCH 2006
MDR 7506
A15PRS
A15HP
# A96F .......Low- to Medium- Impedance Matching Transformer. $36.50
# A85F .......Low- to High- Impedance Mic Matching Transformer $17.50
# A95UF ....Low- to Med- Impedance Mic Transformer ................ $34.95
# A95U ......Low- to Med- Impedance Mic Transformer ................ $32.50
# A15LA.....Line Adapter ................................................................ $34.95
# A15BT.....Bridging Transformer .................................................. $39.95
# A15AS ....Mic Attenuator............................................................. $38.50
# A15PRS ..Phase Reverser .......................................................... $38.50
# A15HP ....High-Pass Filter .......................................................$38.50
• Special multi-pin breakway design allows mixer to be easily
detatched from camera
• 2 XLR Male (at camera end), Mini Stereo Male & Female
• Mixer end is available with 2 XLRs or multi-pin Hiroshi
# RECABCCS104 .. 20ft. breakaway cable with multi-pin Hiroshi
for the Sound Devices 442 PSC M3 and
AlphaMix ............................................ $215.00
# RECABCM4 ....... 20ft. breakaway cable with multi-pin Hiroshi
forthe Wendt X4 and X5 .................. $239.00
Breakaway cable with 2 XLRs for Sound Devices 302 and
MixPre, Shure FP-33, Wendt X2 and Rolls MX442 Mixers
# CABACX15 ........ 15ft. ................................................. $189.95
# CABACX25 ........ 25ft. ................................................. $199.95
Garfield Headphone Softie slip-on soft Rayon Chenille
fabric earpad covers designed for comfort
# GAHS Pair ............................................ $15.95
Versa-Flex
Professional Audio Harness
• Carry your portable mixer or recorder with
greater ease, comfort and accessibility
using this over the shoulder harness
• Wide shoulder pads provides better
weight distribution
• Weather proof durable construction
• Room for mixer/recorder with additional
clips for carrying extra equipment
and cables
• Compatible with cases from Porta-Brace, Kata, Petrol and more
# VEPAH ...............................................$149.95
Compak
Universal Telephone Audio Interface
Allows you to get audio in an
out of analog phone lines,
PBX systems, even cell phones.
Perfect for Remote Broadcasts,
IFB feeds, or interviews over
any phone connection.
# JKCOMP .............................................$499.95
227
AUDIO FOR VIDEO
800.947.9923 ( 212.444.5023
PORTABLE RECORDERS & ACC.
VIDEO QUICK
DIAL
91 (
Ares-M
PCM-D1
FlashMic
Digital Field Recorder
Mobile Digital Recorder
Professional Portable MiniDisc Recorder
High-quality portable recorder designed for
a wide variety of mobile recording applications
including: broadcast, live sound, house of
worship and sound design.
• 24bit/96kHz mobile digital recorder
• Built-in condenser microphones
• 4GB internal memory
• (4) “AA” rechargeable batteries
& charger (supplied)
• USB 2.0 port for file transfers to Mac & PC
The Ares-M is a lightweight hand-held digital
recorder equipped with one gigabyte of
internal memory, a built-in stereo microphone
and a Zminiature USB port. Designed for
broadcast applications, it the offers instant
start-up, one button recording, automatic level
control and an internal loudspeaker. This
compact, high quality audio recorder is
powered by two “AA” batteries, offering up
to 10 hours of continuous operation.
The HHB FlashMic is a professional microphone/
digital recorder that combines a high-quality
Sennheiser omni-directional condenser
capsule with a broadcast-quality,
1gigabyte Flash recorder.
• Integrated condenser microphone/digital recorder
• Built-in USB port for Drag and drop file transfer
• Maximum record time of over 18 hours
• (2) “AA” batteries provide more than 6
hours continuous power
# SOPCMD1 .......................................................... $1849.95
# NAARESM ...........................................$975.00
# HHFM ............................................. $1,249.95
PMD670
PMD-660
R4
2 Channel Solid State Recorder
Compact Flash Recorder
4-Track Digital Recorder
Based around the design of the popular
PMD-670, the PMD-660 is a full
featured easy to use, 2-channel solid
state recorder, yet small enough to
fit in the palm of your hand.
• Records on Compact Flash Media
• Records .wav files at 44.1 kHz or 48 kHz (over 1hr stereo) or
mp3 at 128 kbps (over 17hrs stereo) • 4 AA Batteries (4hrs) •
2 XLR inputs w/Phantom Power • Stereo line I/O
• Built-in USB port for easy file transfer
• Audio recorder captures high-quality
digital audio files to Compact
flash or IBM Microdrive
(Supports up to 10GB)
• Selectable file formats include compressed
MP2, MP3 & uncompressed recording in WAV file format.
• 2-Second Pre-Record Buffer • Built-in Mic and Speaker
• Backlit LCD Display • Two XLR and 1/4 Mic Inputs as well as
+48V phantom power for use with condenser mics
• AA will record for 6 hours
A compact portable recorder that
will record 4 tracks of
24-bit/96-kHz on a 40GB
Hard Drive. It features 4
XLR inputs with phantom
power, Limiter, EQ Compressor,
DeEsser and more. The Lanc Terminal
synchronizes to the cameras start/stop,
USB 2.0 for High-Speed computer transfer.
# MAPMD660 .........................................$499.95
# MAPMD670 .........................................$699.95
# EDR4..................................................... CALL
HD-P2
FR-2
744T
Portable High-Definition Stereo Recorder
Field Recorder w/Time Code
4-Channel Time Code Recorder
The HD-P2 is a 24-bit/192kHz Compact Flash recorder designed for
broadcast and location sound applications. It features SMPTE time
code input, professional connectivity, a large, angled LCD, and a
FireWire port for fast data transfers to computer editing systems.
• (2) XLR Mic Inputs w/Phantom Power & Analog Peak Limiter
• Unbalanced Stereo RCA I/O
NEW!
• Built-In Mono Mic and Speaker
• SMPTE Input on Locking XLR Jack
• BNC Video Clock Input
• S/PDIF Digital I/O
• PS/2 Keyboard Input
The FR-2 is a professional two-track 24-bit/192kHz field
memory recorder designed for location sound recording,
broadcast, & high-quality Sound FX acquisition. It is available
with or without the time code card option preinstalled.
• Industry-standard BWF format.
• Easy file transfer to PC/Mac via USB
• File per Take system
• 132 x 65 dot matrix LCD
• Powered via AA or optional AC adapter
#FOFR2 w/o time code ....................................... $1,299.95
#FOFR2TC w/ time code..................................... $1,898.00
The 744T is a super-compact,
high-resolution
24 bit / 192 kHz
four-track digital
audio recorder with
full read/write time code. It records to its internal 40GB
hard drive or Compact Flash medium. It is the perfect tool
for any critical recording environment from over-theshoulder to cart-based production
#TAHDP2 ............................................................. $999.00
# SO744T ........................................... $3,950.95
MZ-M100
MicroTrack 24/96
MZ-M10
Mobile Digital Recorder
Hi-MD Mini Disc Recorder
Hi-MD Mini Disc Recorder
The MICROTRACK 24/96 is a high-fidelity 2channel digital recorder that utilizes balanced
mic/line inputs and a dedicated stereo 1/8”
mini electret mic input for recording .WAV and
MP3 files to CompactFlash or microdrives.
• 2-channel .WAV and MP3 recording
(24-bit/96kHz)
• Dual Mic Preamps with 48V Phantom Power
• File Transfer to PC and MAC via USB 2.0
Connector
The Sony MZ-M100 is a Hi-MD portable
Mini-disc ideal for journalists and
musicians who need to make high-quality,
longer-length stereo audio recordings using
cost-effective removable storage media.
• Large 6-Line Organic EL Display
• Multi-Function Remote Control
• Ni-MH Rechargeable Battery Included
• Inputs: USB, Mic, Line (Analog & Digital)
• Upload files via USB to Mac & PC
The Sony MZ-M10 is a Hi-MD portable
Mini-disc ideal for field recording using
cost-effective removable storage media.
• Large 5-Line LCD Display
• 1 GB Data File Storage
• Ni-MH Rechargeable Battery Included
• Inputs: USB, Mic, Line (Analog & Digital)
• Ideal for Journalists and Musicians
• Upload files via USB to Mac & PC
# MAMTQ .............................................$399.00
# SOMZM100 ............................................. CALL
# SOMZM10............................................... CALL
EC90
PMD201/PMD222
Pro Portable Cassette Recorders
PMD201/PMD222 mono cassette
recorders feature RCA line
inputs and outputs, a
built-in telephone jack
and heavy duty construction.
• 1/2 speed recording
• Built-in mic and automatic level
• Built-in mic and speaker
• Powers via (3) “D” batteries
# PMD-201 2-heads, mini plug mic input ............... $349.95
# PMD-222 3-heads, mini plug/XLR mic input ....... $449.95
Rechargeable Battery Systems
• Powers up to two portable devices such as a DAT
recorder and mic preamp
• Three versions are available to power
today’s most popular devices.
Choose from standard 12 volt or dual
voltage models that make it possible to
provide two different voltages from the same battery
• Battery level meter • Dual rate charger eliminates the need for
expensive outboard charger units. Instead, charging is done by
connecting the battery to an inexpensive power supply.
• On board battery monitor circuit prevents the sealed lead acid
batteries to become fully drained
Audio Recorder Cases
# AR-DAP1....... For Tascam
DA-P1........ $173.95
# AR-PD4 ......... For Fostex PD-4
(Special pocket no RM-Multi) .... $193.50
# AR-FR2 ......... For Fostex FR-2 .......................... $209.95
# AR-222.......... For Marantz PMD-201, 221,
222, 420, 430 ............................. $173.95
# AR-PMD650 .. For Marantz PMD-650, 670 ........ $134.95
# AR-MDP500 .. For HHB MDP-500 ..................... $136.95
MARCH 2006
228
COMMUNICATION
www.bhphotovideo.com
VIDEO QUICK
DIAL
91 (
INTERCOM & IFB
COM-40/60 FC
TD902VS
PRO
4 Person Wired Intercom System
2 Person Wireless Intercom System
Full Duplex Wireless Intercom System
The COM-40FC is a four person, two channel wired intercom
system consisting of: four H-200 headsets, four BP-200
beltpacks, and one PC-100 power console.
Easily expandable with
the B3-100 branch box
and additional headsets,
the COM-40FC is a
versatile, low-cost communication
solution ideal for broadcasters,
videographers, houses of worship, and educational
institutions.
The TD902VS is a two-person wireless intercom system
designed to allow videographers
to monitor incoming camera
audio in one earpiece while
maintaining continuous wireless
voice contact with remote crew
members. Consisting of two TD 900
full-duplexing radios, a Cyber single-sided
headset, and a Monarch dual-sided headset, the TD902VS is
an ideal lightweight solution for hands-free communication in
the field.
• 1/4 mile operating range
• Standby and Continuous Talk switching
• Independent volume control knob for each user
• Battery Life: 12 hours standby and 5 hours communication
• Includes: plastic hard-shell carrying case, 4.8 V NICad
rechargeable battery and chargers
PortaCom PRO The PortaCom PRO is a 4 headset, full duplex
wireless intercom system designed for videographers, location
sound professionals, and houses of worship. PortaCom’s patent
pending O.P.E.N (Omni Point Expandable Network), allows an
unlimited number of users to share the system simultaneously
(without the need for base station repeaters or active antennae).
U.S.E. (User Selectable Encryption), the easy to use encryption
selection feature makes the system ultra secure from unwanted
interference
• (4) or (6) HW300 Headsets
• (4) or (6) BPW-300 Wireless Belt Packs
• Omni Point Expandable Network
• 2.4 GHz world wide range
• 16 User selectable channels
• User selectable encryption
• 2 High-powered antennas
for extended range
• Includes: Deluxe Carrying
Case, AC power adapter
• 4-Dual-earpiece headset with Lo-Z. noise-canceling mic
• 4-Lightweight aluminum belt packs with volume control,
A/B channel switch, mic on/off, and call button with LED
• Rack mountable power console with 4 outputs, includes
AC Adapter
• Optional PBS-100 portable battery supply
• Systems Available with or Without Cables
• Includes: CC-125F deluxe carrying case with foam inserts
• Requires Interconnect Cables
(standard shielded XLR mic cables)
# POCOM40FC ............................................ CALL
COM-60FC Six person, 2 channel wired intercom system
# POCOM60FC ........................................... CALL
Other Configurations Available
# EATD902VS .........................................$374.95
TD902- Same as TD902VS but Includes two
Cyber headsets (No camera monitoring)
Eartec TD-900 Add-On Transceiver
The TD 900R is the full duplexing portable
transceiver component of the Eartec TD-900
series wireless intercoms.
• Hands-free wireless radio intercom transceiver
• UHF frequency range with 40-channel access, 1/4 mile
operating range • Standby (listen only) and Continuous Talk
switching • Independent volume control knob
• LED status indicators for signal monitoring
(4) Person Systems
NEW!
With Single-Sided Headsets
# POPC40S ................................................ CALL
With Dual-Sided Headsets
# POPC40 ................................................. CALL
(6) Person Systems
With Single-Sided Headsets
# POPC60S ................................................ CALL
With Dual-Sided Headsets
# POPC60 ................................................. CALL
TD 904 Pro Series
Wired Intercom Components
4 Person Wireless Intercom System
Wireless Intercom Accessories
H-200
The 904PRO is a portable, four station
full-duplexing wireless intercom
system operating in the UHF frequency
range. The system allows 1 Headset
(director) to continuously transmit to
all, 1 headset to continuously transmit
to the director, and 2 headsets to continuously monitor the director.
The 904Pro system is ideal for professional ENG, event, and houses
of worship video crews.
• 4-TD900 full duplexing radios • 4-single-sided headsets w/ noisecanceling microphones • UHF frequency range with 40-channel
access, 1/4 mile operating range • Independent volume control knob
SL-Slimline Single-sided medium-weight headset
# EASL ...................................... $74.95
SLD-SlimLine Dual-sided medium-weight headset
# EASLD ..................................... $94.95
TDX4EX-Extended life NIMH battery
with charger
# EATDX4EX............................................ $31.95
TDX4N-Standard NiCad replacement battery
# EATDX4N ............................................. $14.95
TDX9W-9 Volt battery adapter
# EATDX9W ............................................ $14.95
H-200S
BP200
B3-100
PC100
Dual-earpiece headset headset with
Lo-Z, noise-canceling mic
# POH200 ............... $167.00
Single-earpiece headset with Lo-Z,
noise-canceling mic
# POH200S ............. $169.00
Shown H-200S
Lightweight wired intercom beltpack w/ metal casing and beltclip
# POBP200....................................... $167.00
Channel expander (branch box) 1 XLR in/3XLR out
# POB31003 ..................................... $100.00
Channel powering console for COM series wired intercom systems
# POPC1002 ..................................... $265.00
# EATD904 ............................................$779.95
BST-25/PR-216 TV 5/6
IFB Wireless Monitoring System
Wireless Cueing System
The RC-216 Receive-A-Cue system is
a professional quality, digitally synthesized
wireless cueing system (with mic muting
switch) designed for broadcast and film
cueing applications. It Includes: M-216
wireless microphone transmitter, PR-216
personal receiver, IR-230 inductor receiver,
NTC-102 neck-loop transductor , CM-183
lapel mic, SM-N earphone assembly and
C-216 carrying case
AP-230
IFB Kit
RC-216 Option 1
BST-25 Base Station Transmitter
• 119 user-selectable channels in the
TV-5/6 band (76.2 to 87.8MHz)
• Balanced mic or line level input
• Switchable EQ circuit for superb speech intelligibility
PR-216 TV 5/6 Personal Receiver
• For use with the BST-25 base station transmitter
• Designed for TV and Film production
remote program monitoring
• Operates in TV-5/6 band (76.2 to 87.8 MHz)
# COBST25 .......................................... $1099.95
# COPR216TV56 .....................................$279.95
MARCH 2006
TD 904 Pro Series
IFB System used for a wide
variety of applications including:
film and television production,
live sound, theater, tour guides
and language interpretation.
Includes:
• IFB Beltpack Receiver
• LM Wireless Belt-Pack Transmitter
• M152 - Omnidirectional Lavalier Microphone
• Otto Engineering - Single IFB Earphone with 1/8” Miniplug (Beige)
# CORC216O1 ........................................$949.95
PSC
# LEIFBK................................................... CALL
# LEIFBR1A IFB Beltpack Receiver only.................... $465.00
V110611
IFB Earphones
Auto-Prompter Kit
Wireless Ear Receiver w/squelch
Otto Engineering Lightweight Earphone
Auto-Prompter Kit
The AP-230 is designed for discrete cueing
applications used in conjunction with
COMTEK personal receivers, miniature
tape recorders, dat recorders,
MP-3 players, etc.
The complete system includes: IR-230
universal-fit ear canal inductor receiver,
NTC-102 neck-loop transductor with two 32” down-lead cords
(one 1/8” and one 3/32” plug) and P-11 storage pouch.
The Wireless Ear Receiver fits
securely in your ear canal.
Used in conjunction with either
the OTTO Flat Pack Inductor or
Neck Loop style Inductor to create
the invisible inductive field that
transmits the radio’s sound to the
Wireless Ear Receiver. Squelch version
mutes the amplifier when no signal is present.
(Includes neck loop)
# OTV110611K........................................$244.95
• Ideal for Applications Requiring Discrete Communications
• Low-Profile, Flexible Transparent Acoustic Tube
• Right Angle 1/8”(3.5mm) Mini Connector
• Replacment parts available
# COAP230 ............................................$249.95
# OTV110437 ................ $44.95
Voice Technologies VT600
• Interfaces w/ Any Wireless or Hardwired
Receiver f/ Discrete Monitoring
• Universal Fit w/Replaceable Foam Tips
• 1/8”(3.5mm) Mini Connector
# VT0085 ..............................................$110.00
229

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project