Clarion | RMX465D | Owner`s manual | Clarion RMX465D Owner`s manual

Clarion RMX465D Owner`s manual
Owner’s manual
Mode d’emploi
Manual de instrucciones
RMX465D
AM/FM MD PLAYER WITH CD
CHANGER CONTROL
•
LECTEUR MD AM/FM AVEC
COMMANDE DE CHANGEUR CD
•
RADIO DE AM/FM Y REPRODUCTOR DE
MINIDISCOS CON CONTROL DE CAMBIADOR
DE DISCOS COMPACTOS
6
Clarion Co., Ltd.
1999/12 (A·C)
All Rights Reserved. Copyright © 1999: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Inpreso en China
PE-4026B
280-7434-00
Thank you for purchasing this Clarion product.
Memorándum
∗ Please read this owner’s manual in its entirety before operating this equipment.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
∗ This manual includes the operating procedures of the CD changer. The CD changer has its own
manual, but no explanations for operating it are described.
Contents
1. FEATURES ..................................................................................................................................... 2
2. PRECAUTIONS .............................................................................................................................. 3
Handling MD .................................................................................................................................... 4
3. CONTROLS .................................................................................................................................... 5
4. NOMENCLATURE .......................................................................................................................... 6
Names of Buttons ............................................................................................................................ 6
Display Items ................................................................................................................................... 6
5. DCP ................................................................................................................................................. 7
6. REMOTE CONTROL ...................................................................................................................... 8
Inserting the Batteries ..................................................................................................................... 8
Functions of Remote Control Unit Buttons ..................................................................................... 9
7. OPERATIONS ............................................................................................................................... 10
Basic Operations ........................................................................................................................... 10
Radio Operations .......................................................................................................................... 12
MD Operations .............................................................................................................................. 13
8. OPERATIONS OF ACCESSORIES ............................................................................................. 15
CD Changer Operations ............................................................................................................... 15
9. TROUBLESHOOTING .................................................................................................................. 17
10. ERROR DISPLAYS ....................................................................................................................... 18
11. SPECIFICATIONS ........................................................................................................................ 19
1. FEATURES
■
■
■
■
■
■
■
■
■
■
■
■
2
DIN Chassis with Detachable Control Panel
Z-Enhancer with 3 Mode Sound Selector
®
FM Reception System
AM/FM Bands - 1AM, 3FM / 18FM/6AM Touchbutton Memory
8-Times Oversampling Digital Filter and Dual 1-Bit D/A Converters
16M Bit Read Ahead Memory (Approximately 40 Seconds) for Shock Resistance
Zero-Bit DetectorTM Mute Circuit
Repeat/Random Play / Intro Music Scan
Multi-Color LC Display
2-Channel RCA Line Level Output with Fader Control
180W (45W×4) Maximum Power Output
Infrared Remote Control
RMX465D
RMX465D
57
11. ESPECIFICACIONES
Sintonizador de FM
Audio
Gama de frecuencias:
87,9 a 107,9 MHz
Sensibilidad útil:
11 dBf
Sensibilidad a 50 dB de silenciamiento:
17 dBf
Selectividad de canal alternativo:
75 dB
Separación entre canales (1 kHz):
35 dB
Respuesta en frecuencia (±3 dB):
30 Hz a 15 kHz
Salida máxima de potencia:
180 W (45 W × 4 canales) (EIAJ)
Salida media continua de potencia:
16 W × 4, con 4 Ω, de 20 Hz a 20 kHz, 1% de
distorsión armónica total
Acción de control de graves (30 Hz):
±13 dB
Acción de control de agudos (10 kHz):
±10 dB
Salida de línea (reproductor de minidiscos 1 kHz):
1,8 V
Sintonizador de AM
Gama de frecuencias:
530 a 1710 kHz
Sensibilidad útil:
25 µ V
Reproductor de minidiscos
Respuesta en frecuencia (±2 dB):
20 Hz a 20 kHz
Relación señal-ruido (1 kHz):
90 dB
Gama dinámica (1 kHz):
85 dB
Distorsión armónica:
0,01%
Generales
Tensión de alimentación:
14,4 V CC (permisible de 10,8 a 15,6 V),
negativo a masa
Consumo de corriente:
Menos de 15 A
Impedancia de los altavoces:
4 Ω (permisible de 4 a 8 Ω)
Peso / Unidad fuente:
3,3 lb. (1,5 kg)
Peso / Controlador remoto:
1 oz. (30 g) (incluyendo la pila)
Dimensiones / Unidad fuente:
7" (An) × 2" (Al) × 6-1/8" (Prf)
[178 (An) × 50 (Al) × 155 (Prf) mm]
Dimensiones / Controlador remoto:
1-3/4" (An) × 4-5/16" (Al) × 1-1/8" (Prf)
[44 (An) × 110 (Al) × 27 (Prf) mm]
Notas:
• Las especificaciones están de acuerdo con las normas de la EIA.
• Licencia de patentes en EE.UU y otros países por parte de Dolby Laboratories Licensing Corporation.
• Las especificaciones y el diseño están sujetos a cambio sin previo aviso por motivo de mejoras.
Handling MD
2. PRECAUTIONS
1. When the inside of the car is very cold and
the player is used soon after switching on
the heater moisture may form on the disc or
the optical parts of the player and proper
playback may not be possible. If moisture
forms on the disc, wipe it off with a soft cloth.
If moisture forms on the optical parts of the
player, do not use the player for about one
hour. The condensation will disappear naturally allowing normal operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and
on, the user is encouraged to consult the dealer
or an experienced radio technician for help.
Use only MDs bearing the
2. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
3. This unit uses a precision mechanism. Even
in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.
mark.
Handling
Storage
• Never open the shutter on the MD cartridge.
• Do not expose minidiscs to direct sunlignt or
any heat source.
• Do not expose minidiscs to excess humidity or
dust.
• Do not expose minidiscs to direct heat from
heaters.
Cleaning
• If the MD cartridge is dirty, wipe off the dirt
with a soft dry cloth.
CAUTION
USE OF CONTROLS, ADJUSTMENTS, OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER and MINI DISC
PLAYER SHOULD NOT BE ADJUSTED OR
REPAIRED BY ANYONE EXCEPT PROPERLY
QUALIFIED SERVICE PERSONNEL.
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID
THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
INFORMATION FOR USERS:.
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY
AND WILL VIOLATE FCC APPROVAL.
Shutter
• Discs recorded in monaural mode cannot be
played on this unit.
Cartridge
• Never play a minidisc with an index label that
is peeling off .
If you try to play such a minidisc, you may not
be able to get it back out of the MD player or it
may damage the MD player.
MODEL
12V
GROUND
AM 530-1710kHz/FM 87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES.OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS PRODUCTION COMPLIES DHHS RULES 21 CFR
SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE.
US AND FOREIGN PATENTS LICENSED FROM DOLBY
LABORATORIES LICENSING CORPORATION
CLARION CO.,LTD.
50 KAMITODA,TODA-SHI,SAITAMA-KEN,JAPAN
MANUFACTURED:
SERIAL No.
PE-
286Clarion Co.,Ltd.
MADE IN
Bottom View of Source Unit
Be sure to unfold and read the next page.
Veuillez déplier et vous référer à la page suivante.
Cerciórese de desplegar y de leer la página siguiente.
56
RMX465D
RMX465D
3
RMX465D
4
4. NOMENCLATURE
3. CONTROLS / LES COMMANDES / CONTROLES
10. INDICACIONES DE ERROR
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).
Source unit / Appareil pilote / Unidad fuente
Cuando ocurra un error, se visualizará el tipo del mismo.
Tome las medidas descritas a continuación para solucionar el problema.
Names of Buttons
2
3
4
5
2 A-M (audio mode) button
SCN (scan) button
LD (loudness) button
0 Preset buttons (1 to 6)
3 POWER button
FNC (function) button
4 Eject button
5 DISP (display) button
6
6 ISR (instant station recall) button
7 RDM (random) button
8 RPT (repeat) button
Direct buttons (1 to 6)
! Z-EHCR (z-enhancer) button
#
@ !
0
987
6
Display Items
1 Operation status indication
Display / Afficheur / Visualizador
∗ The frequency, play time, clock, etc. are
displayed.
1
2
3
ERROR 2
En el interior del deck de minidiscos
está atascado un minidisco y no puede
extraerse.
Ésta es una avería del mecanismo del
deck de minidiscos, y usted tendrá que
consultar al establecimiento de
adquisición.
ERROR 3
No es posible reproducir un minidisco
debido a ralladuras, etc.
Reemplace el minidisco por otro no
rallado ni alabeado.
ERROR 6
En el deck de minidiscos está cargado
un minidisco al revés y no puede
reproducirse.
Extraiga el minidisco y vuelva a
cargarlo adecuadamente.
Se visualizará cuando cargue un minidisco
no grabado en el deck de minidiscos.
Cargue un minidisco grabado en el deck de
minidiscos.
ERROR 2
No hay discos cargados en el interior
del cambiador de discos compactos.
Éste es un problema del cambiador de
discos compactos. Póngase en contacto con
el comercio en el que adquirió la unidad.
ERROR 3
El disco compacto del cambiador de
discos compactos no puede
reproducirse debido a ralladuras, etc.
Reemplace el disco compacto por otro
que no esté rayado ni alabeado.
ERROR 6
Extraiga el disco y cárguelo
El disco compacto del cambiador de
adecuadamente.
discos compactos no puede
reproducirse debido a que está cargado
al revés.
TOP button
# SRCH (Search) buttons
Left and Right (a and d) buttons
$ Rotary volume knob
Play/pause button
$
Solución
@ BND (band) button
% Mute button
%
MD
1
MD Insertion Slot
Fente d’insertion de la MD
Ranura de inserción de MD
9 PS/AS (preset scan/auto store) button
Cambiador de discos compactos
1 Release button
Causa
Indicación de error
Si aparece una indicación de error no descrita arriba, presione el botón de reposición. Si el problema continúa,
desconecte la alimentación y póngase en contacto con el comercio en el que adquirió la unidad.
2 DISC indication
3 Z-EHCR (z-enhancer) indication
4 RDM (random) indication
5 Preset channel indication (1 to 6)
Disc number indication (1 to 6)
9
8
∗ The disc numbers corresponding to the discs
in the CD changer light.
76 5 4
6 RPT (repeat) indication
7 SCN (scan) indication
8 Disc in indication
9 MANU (manual) indication
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
5
RMX465D
6
RMX465D
RMX465D
55
5. DCP
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the included DCP case to prevent scratches.
We recommend taking the control panel with you
when leaving the car.
Storing the DCP in the DCP Case
Hold the DCP, in the orientation as shown in the
figure below, and put it into the supplied DCP
case. (Ensure the DCP is in the correct orientation.)
Removing the DCP
1. Hold down POWER button 3 for 1 second or
longer to turn off the power.
2. Press the DCP Release button 1.
∗ The DCP is unlocked
3. Remove the DCP.
Attaching the DCP
Insert the DCP into the right side of the source
unit and press the left side to lock it.
Do not insert the DCP from the left side. Doing so may damage it.
• The DCP can easily be damaged by shocks.
After removing it, place it in a protective
case and be careful not to drop it or subject
it to strong shocks.
• When the Release button is pressed and the
DCP is unlocked, the car’s vibrations may
cause it to fall. To prevent damage to the
DCP, always store it in its case after detaching it.
• The rear connector connecting the main unit
and the DCP is an extremely important part.
Be careful not to damage it by pressing on
it with fingernails, pens, screwdrivers, etc.
DCP Rear Panel
Source Unit Front
DCP
connector
Source unit connector
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
clothonly.
RMX465D
7
6. REMOTE CONTROL
Receiver for remote control unit
6
Operating range: 30° in all directions
Remote control unit
Signal transmitter
¥
)
*
(
&
™
¡
£
¢
§
∞
Inserting the Batteries
1. Turn the remote control unit over, then slide
the rear cover in the direction of the arrow.
2. Insert the AA (UM-3/1.5V) batteries that came
with the remote control unit facing in the
directions shown in the figure, then close the
rear cover.
AA (UM-3/1.5V)
Batteries
Notes:
Using batteries improperly can cause them to explode. Take note of the following points:
• When replacing batteries, replace both batteries
with new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or water.
• Dispose of spent batteries properly.
8
RMX465D
Rear cover
Rear side
Functions of Remote Control Unit Buttons
Button
Mode
Radio
MD
CD changer
¥ FUNC
Turns power on and off. When pressed and held for 1 second: Turns power off.
Switches among radio, MD and CD changer.
& BAND
DISC UP
PROG
TOP
Switches reception band.
* VOLUME
Increases and decreases volume (in all modes).
( SEARCH
Moves preset channels up
and down.
Moves tracks up and down.
When pressed and held for
1 second:
Fast-forward/
fast-backward.
) PLAY/PAUSE
Turns mute on and off.
Switches between playback Switches between
and pause.
playback and pause.
¡ MUTE
Turns mute on and off.
Switches between playback Switches between
and pause.
playback and pause.
™ ISR
Recalls ISR radio station in memory.
Press and hold for 2 seconds or longer: Stores current station into ISR memory (radio
mode only).
£ DISP
Switches among main display, sub display and clock display.
¢ SCN
PS/AS
Preset scan.
When pressed and held for
2 seconds: Auto store.
Scan play.
Scan play.
When pressed and held for
2 seconds: Disc scan play.
∞ RPT
BLS
No function.
Repeat play.
Repeat play.
When pressed and held for
2 seconds: Disc repeat
play.
§ RDM
DOLBY NR
MONI
No function.
Random play.
Random play.
When pressed and held for
2 seconds: Disc random
play.
Plays the first track.
Top play.
Moves the next disc in
increasing order.
Moves tracks up and
down.
When pressed and held for
1 second:
Fast-forward/
fast-backward.
* Some of the corresponding buttons on the source unit and remote control unit have different functions.
RMX465D
9
7. OPERATIONS
Basic Operations
Note: Be sure to read this chapter referring to the front diagrams of
chapter “3. CONTROLS” on page 5 (unfold).
CAUTION
Turning the Rotary volume knob $ clockwise
increases the volume; turning it counterclockwise
decreases the volume.
∗ The volume level is from 0 (minimum) to 33 (maximum).
Switching the display
Press DISP button 5 to select the desired display.
Each time you press DISP button 5, the display
switches in the following order:
Main display
➜
Be sure to lower the volume before switching off the unit power or the ignition key. The
unit remembers its last volume setting. If you
switch the power off with the volume up, when
you switch the power back on, the sudden
loud volume may hurt your hearing and damage the unit.
The clock is displayed when the ignition key
is turned to the ACC (accessory) or IGN (ignition-on) position even when the unit power
is off. In some cars, the clock may momentarily disappear when the ignition key is
turned to the START position. The clock will
reappear after the engine has started and the
ignition key is released to the IGN (ignitionon) position.
Adjusting the volume
Clock display
Turning on/off the power
Note:
• Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the
battery.
1. Press POWER button 3.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold POWER button 3 for 1 second or longer to turn off the power for the unit.
Selecting a mode
1. Press FNC button 3 to change the mode of
operation.
2. Each time you press FNC button 3, the mode
of operation changes in the following order:
Radio mode ➜ MD mode ➜ CD changer
mode ➜ TV mode ➜ Radio mode...
∗ External equipment not connected with C-BUS
is not displayed.
∗ Once selected, the preferred display becomes
the display default. When a function adjustment
such as volume is made, the screen will
momentarily switch to that function’s display,
then revert back to the preferred display several seconds after the adjustment.
Setting the Z-enhancer
This unit comes with 3 types of sound tone effects
stored in memory. Select the one you prefer.
∗ The factory default setting is “Z-EHCR OFF”.
Each time you press Z-EHCR button !, the tone
effect changes in the following order:
“Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜ “ZENHANCER 3” ➜ “Z-EHCR OFF” ➜ “ZENHANCER 1”...
• Z-ENHANCER 1 : bass emphasized
• Z-ENHANCER 2 : treble emphasized
• Z-ENHANCER 3 : bass and treble emphasized
• Z-EHCR OFF
: no sound effect
Adjusting the tone
10
Press A-M button 2 and select the item to adjust.
Each time you press A-M button 2, the item
changes in the following order:
BASS ➜ TREB ➜ BAL ➜ FAD ➜
Previous mode…
RMX465D
Basic Operations
Adjusting the bass
1. Press A-M button 2 and select “BASS”.
2. Turning the Rotary knob $ clockwise emphasizes the bass; turning it counterclockwise
attenuates the bass.
∗ The factory default setting is “0”. (Adjustment
range: −6 to +6)
3. When the adjustment is complete, press A-M
button 2 several times until the function mode
is reached.
ommended to use the loudness effect.
1. Press and hold LD button 2 for 1 second or
longer to turn on the loudness effect. When
the loudness effect is turned on, the display
will show “LOUD ON”.
2. Press and hold LD button 2 for 1 second or
longer to turn off the loudness effect. The
display will show “LOUD OFF”.
Adjusting the treble
1. Press A-M button 2 and select “TREB”.
2. Turning the Rotary knob $ clockwise emphasizes the treble; turning it counterclockwise
attenuates the treble.
∗ The factory default setting is “0”. (Adjustment
range: −6 to +6)
3. When the adjustment is complete, press A-M
button 2 several times until the function mode
is reached.
Adjusting the balance
1. Press A-M button 2 and select “BAL”.
2. Turning the Rotary knob $ clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound
from the left speaker.
∗ The factory default setting is “0”. (Adjustment
range: L9 to R9)
3. When the adjustment is complete, press A-M
button 2 several times until the function mode
is reached.
Adjusting the fader
1. Press A-M button 2 and select “FAD”.
2. Turning the Rotary knob $ clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound
from the rear speakers.
∗ The factory default setting is “0”. (Adjustment
range: F9 to R9)
3. When the adjustment is complete, press A-M
button 2 several times until the function mode
is reached.
Turning on/off the loudness
The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is rec-
RMX465D
11
Radio Operations
FM reception
For
enhanced FM performance the
®
tuner includes signal actuated
stereo control and Multipath noise reduction
circuits.
Changing the reception area
This unit is initially set to USA frequency intervals
of 10kHz for AM and 200kHz for FM. When using it
outside the USA, the frequency reception range
can be switched to the intervals below.
● Setting the reception area
1. Press BND button @ and select the desired
radio band (FM or AM).
2. While pressing BND button @, each time you
press and hold the SRCH left button # for 2
second or longer, the reception area switches
from inside the U.S.A. Also, while pressing
BND button @, press and hold the SRCH right
button # for 2 second or longer, the reception
area switches from outside U.S.A.
∗ Any station preset memories are lost when the
reception area is changed.
Listening to the radio
1. Press FNC button 3 and select the radio
mode.
2. Press BND button @ and select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3. Press the right or left side of SRCH Left or
Right button # to tune in the desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press BND button @ and select the desired
band (FM or AM).
∗ If “MANU” is lit in the display, press and hold
BND button @ for 1 second or longer. “MANU”
in the display goes off and seek tuning is now
available.
2. Press the right or left side of SRCH Left or
Right button # to automatically seek a station.
When the SRCH Left or Right button # is
pressed, the station is sought in the direction
of higher frequencies; if the left side of SRCH
12
RMX465D
button # is pressed, the station is sought in
the direction of lower frequencies.
Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In quick
tuning mode, you can quickly tune the desired
frequency.
1. Press BND button @ and select the desired
band (FM or AM).
∗ If “MANU” is not lit in the display, press and
hold BND button @ for 1 second or longer.
“MANU” lights in the display and manual tuning
is now available.
2. Tune into a station.
● Quick tuning:
Press and hold the right or left side of SRCH
button # for 1 second or longer to tune in a
station.
● Step tuning:
Press the right or left side of SRCH button #
to manually tune in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the corresponding
preset button recalls the stored radio frequency
automatically.
1. Press BND button @ and select the desired
band (FM or AM).
2. Press the corresponding Preset button 0 to
recall the stored station.
∗ Press and hold one of the Preset buttons 0
for 2 seconds or longer to store that station into
preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of Preset buttons 0 for 2
seconds or longer to store the current station
into preset memory.
Radio Operations
MD Operations
Auto store
Loading an MD
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially. If 6
stations cannot be received, a previously stored
station remains unoverwritten at the memory
position.
1. Press BND button @ and select the desired
band (FM or AM).
2. Press and hold AS button 9 for 2 seconds or
longer. The stations with good reception are
stored automatically to the preset buttons.
1. After confirming the orientation of an MD,
insert the MD into the insertion slot.
Notes:
• Never insert foreign objects into the MD insertion
slot.
• If an MD is not inserted easily, there may be
another MD in the mechanism or the unit may
require service.
Preset scan
Listening to an MD already inserted
• An MD that does not carry the
be used with this unit.
mark cannot
Press FNC button 3 to select the MD mode. Play
starts automatically. If no MD is loaded in the unit,
“NO DISC” appears in the display.
Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for a desired station in memory.
1. Press PS button 9.
2. When a desired station is tuned in, press PS
button 9 again to continue receiving that
station.
Note:
• Be careful not to press and hold PS button 9 for
2 seconds or longer, otherwise the auto store
function engages and the unit starts storing
stations.
Switching between a disc title and
a track title
Instant station recall (ISR)
On this unit, a disc title and a track title that have
been previously entered can be displayed.
Instant station recall is a special radio preset that
instantly accesses a favorite radio station at a
touch of a button. The ISR function even operates
with the unit in other modes.
● ISR memory
1. Select the station that you wish to store in ISR
memory.
2. Press and hold ISR button 6 for 2 seconds
or longer.
● Recalling a station with ISR
In any mode, press ISR button 6 to turn on the
radio function and tune the selected radio station.
“ISR” appears in the display. Press ISR button
6 again to return to the previous mode.
Pausing play
1. Press Play/pause button % to pause play.
“PAUSE” appears in the display.
2. To resume MD play, press Play/pause button
% again.
∗ Titles cannot be entered for MDs with this unit.
1. Press DISP button 5 to display the title.
2. Each time you press and hold DISP button
5 the track title and the disctitle are
alternately displayed.
● Scrolling a title
If an MD title has 11 characters or more, you can
scroll the title using the following operation.
1. Display the MD title (disc).
2. Press BND button @ for 1 second or longer.
The title will scroll.
Ejecting an MD
1. Press Eject button 4 to eject an MD. Take it
out from the ejected position.
∗ The radio mode is selected automatically 4
seconds after Eject button 4 is pressed.
RMX465D
13
MD Operations
Selecting a track
Random play
● Track-up
1. Press the right side of SRCH button # to
move ahead to the beginning of the next track.
2. Each time you press the right side of SRCH
button #, the track advances ahead to the
beginning of the next track.
● Track-down
1. Press the left side of SRCH button # to move
back to the beginning of the current track.
2. Press the left side of SRCH button # twice
to move to the beginning of the previous track.
The random play selects and plays individual tracks
on a disc in no particular order. This function
continues automatically until it is canceled.
1. Press RDM button 7. “RDM” lights in the
display, an individual track is selected
randomly and play begins.
2. To cancel the random play, press RDM button
7 again. “RDM” goes off and normal play
resumes.
Fast-forward/fast-backward
1. Press the DISP button 5 to toggle the display
to the clock mode.
2. Press and hold the DISP button 5 for 1
second or longer.
3. Select SRCH left or right to adjust the time
using the α-selector #.
● Adjusting minutes
Each time you use the SRCH right button #, the
minutes increment up by one digit (0 to 59).
● Adjusting hours
Each time you use the SRCH right button #, the
hours increment up by one digit (1 AM to 12 PM).
Repeat press left and hold the α-selector # to
increment the hours as they count up from AM to
PM, stopping on the correct hour.
● Fast-forward
Press and hold the right side of SRCH button #
for 1 second or longer.
● Fast-backward
Press and hold the left side of SRCH button #
for 1 second or longer.
Top function
The top function resets the MD player to the first
track of the disc. Press TOP button @ to play
the first track (track No. 1) on the disc.
Scan play
The scan play locates and plays the first 10
seconds of each track on a disc automatically. This
function continues on the disc until it is canceled.
∗ The scan play is useful when you want to select a
desired track.
1. Press SCN button 9 to start track scanning.
“SCN” lights in the display.
2. To cancel the scan play, press SCN button 9
again. “SCN” goes off from the display and
the current track continues to play.
Repeat play
The repeat play continuously plays the current
track. This function continues automatically until
it is canceled.
1. Press RPT button 8. “RPT” lights in the
display and the current track is repeated.
2. To cancel the repeat play, press RPT button
8 again. “RPT” goes off from the display and
normal play resumes.
14
RMX465D
Setting the clock
∗ The clock only displays time in a 12-hour format.
There is no way to toggle the clock to a 24-hour
format.
4. Press the DISP button 5 to set the clock into
memory. This also resets the seconds counter
to zero.
Note:
• The clock can only be set by turning power on to
the unit and switching to the clock display mode.
You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the car’s
battery, the clock must be reset. While setting the
clock, if another button or operation is selected,
the clock set mode is canceled.
8. OPERATIONS OF ACCESSORIES
CD Changer Operations
CD changer functions
When an optional CD changer is connected
through the C-BUS cable, this unit controls all
the CD changer functions. This unit can control
a total of 2 changers.
Press FNC button 3 and select the CD changer
mode to star t play. If 2 CD changers are
connected, press FNC button 3 to select the
CD changer for play.
∗ If “NO MAGA” appears in the display, insert the
magazine into the CD changer. “LOADING”
appears in the display while the player loads
(checks) the magazine.
∗ If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
CAUTION
CD-ROM discs cannot be played in the CD
changer.
Pausing play
1. Press Play/pause button % to pause play.
“PAUSE” appears in the display.
2. To resume play, press Play/pause button %
again.
2. Each time you press the right side of SRCH
button #, the track advances ahead to the
beginning of the next track.
● Track-down
1. Press the left side of SRCH button # to move
back to the beginning of the current track.
2. Press the left side of SRCH button # twice
to move to the beginning of the previous track.
Fast-forward/fast-backward
● Fast-forward
Press and hold the right side of SRCH button #
for 1 second or longer.
● Fast-backward
Press and hold the left side of SRCH button #
for 1 second or longer.
Top function
The top function plays from the first track (track
No. 1) of the disc.
Press the Direct button 0 with the same number
as the CD playing.
∗ If a CD is not loaded in a slot of the magazine,
pressing the Direct button 0 corresponding to its
disc number is invalid.
Selecting a CD
Scan play
Each of the Direct button 0 corresponds to a
disc loaded into the magazine.
● Selecting a disc from 1 to 6
Press the corresponding Direct button 0 to select
the desired disc.
The scan play locates and plays the first 10
seconds of each track on a disc automatically.
This function continues on the disc until it is
canceled.
Switching Magazine
This function can be used only when the connected
CD changer can store a multiple number of magazines.
Every time the MAG button @ is pressed, the next
magazine will be selected.
∗ If a CD is not loaded in a slot of the magazine,
pressing the Direct button 0 corresponding to its
disc number is invalid.
Selecting a track
● Track-up
1. Press the right side of SRCH button # to
move ahead to the beginning of the next track.
∗ The scan play is useful when you want to select a
desired track.
1. Press SCN button 9 to start track scanning.
“SCN” lights in the display.
2. To cancel the scan play, press SCN button 9
again. “SCN” goes off from the display and
the current track continues to play.
Disc scan play
The disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD changer. This function
continues automatically until it is canceled.
∗ The disc scan play is useful when you want to
select a desired CD.
RMX465D
15
CD Changer Operations
1. Press and hold SCN button 9 for 1 second
or longer. “DISC” and “SCN” light in the display
and the disc scan play starts.
2. To cancel the disc scan play, press SCN button
9 again. “DISC” and “SCN” go off from the
display and the current track continues to play.
Repeat play
The repeat play continuously plays the current
track. This function continues automatically until
it is canceled.
1. Press RPT button 8. “RPT” lights in the
display and the current track is repeated.
2. To cancel the repeat play, press RPT button
8 again. “RPT” goes off from the display and
normal play resumes.
Disc repeat play
After all the tracks on the current disc have been
played, the disc repeat play automatically replays
the current disc over from the first track. This
function continues automatically until it is
canceled.
1. Press and hold RPT button 8 for 1 second
or longer. “DISC” and “RPT” light in the display
and the disc repeat play starts.
2. To cancel the disc repeat play, press and hold
RPT button 8 again. “DISC” and “RPT” go
off from the display and normal play resumes
on the current track.
Random play
The random play selects and plays individual
tracks on the disc in no particular order. This
function continues automatically until it is
canceled.
1. Press RDM button 7. “RDM” lights in the
display and the random play begins.
2. To cancel the random play, press RDM button
7 again. “RDM” goes off from the display and
normal play resumes.
16
RMX465D
Disc random play
The disc random play selects and plays individual
tracks or discs automatically in no particular
order. This function continues automatically until
it is canceled.
1. Press and hold RDM button 7 for 1 second
or longer. “DISC” and “RDM” light in the display
and the disc random play starts.
2. To cancel the disc random play, press and
hold RDM button 7 again. “DISC” and “RDM”
go off from the display and normal play
resumes from the current track.
9. TROUBLESHOOTING
General
Problem
Cause
Measure
Power does not
turn on.
(No sound is
produced.)
Fuse is blown.
Replace with a fuse of the same amperage. If the
fuse blows again, consult your store of purchase.
Incorrect wiring.
Consult your store of purchase.
No sound output
when operating
the unit with
amplifiers or
power antenna
attached.
Power antenna lead is
shorted to ground or
excessive current is required
for remote-on the amplifiers
or power antenna.
1. Turn the unit off.
2. Remove all wires attached to the power antenna
lead. Check each wire for a possible short to
ground using an ohm meter.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to the
power antenna lead one by one. If the amplifiers
turn off before all wires are attached, use an
external relay to provide remote-on voltage
(excessive current required).
Nothing happens
when buttons are
pressed.
The microprocessor has
malfunctioned due to noise,
etc.
Turn off the power, then press Release button 1 and
remove the DCP.
Press the reset button for about 2 seconds with a thin
rod.
DCP or source unit
connectors are dirty.
Wipe the dirt off with a soft cloth moistened with
cleaning alcohol.
Another MD is already
loaded.
Eject the MD before loading the new one.
MD inserted wrongly.
Insert correctly.
Sound skips or is
noisy.
MD is heavily scratched or
warped.
Replace with an MD with no scratches.
Sound is bad
directly after
power is turned
on.
Water droplets may form on
the internal lens when the
car is parked in a humid
place.
Let dry for about 1 hour with the power on.
Display is not
accurate.
Reset button
MD
MD cannot be
loaded.
RMX465D
17
10. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
CD changer
MD
Error Display
Cause
Measure
ERROR 2
An MD is caught inside the MD deck and
is not ejected.
This is a failure of MD deck’s mechanism
and consult your store of purchase.
ERROR 3
An MD cannot be played due to scratches,
etc.
Replace with a non-scratched,
non-warped-disc.
ERROR 6
An MD is loaded upside-down inside the
MD deck and does not play.
Eject the disc then reload it properly.
Displayed when a non-recorded MD is
loaded in the MD deck.
Load a pre-recorded MD in the MD deck.
ERROR 2
A CD inside the CD changer is not loaded.
This is a failure of CD changer’s mechanism and consult your store of purchase.
ERROR 3
A CD inside the CD changer cannot be
played due to scratches, etc.
Replace with a non-scratched, non-warped
disc.
ERROR 6
A CD inside the CD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
18
RMX465D
11. SPECIFICATIONS
FM Tuner
Audio
Frequency Range:
87.9 MHz to 107.9 MHz
Usable Sensitivity:
11 dBf
50dB Quieting Sensitivity:
17 dBf
Alternate Channel Selectivity:
75 dB
Stereo Separation (1 kHz):
35 dB
Frequency Response (±3 dB):
30 Hz to 15 kHz
Maximum Power Output:
180 W (45 W × 4 ch) (EIAJ)
Continuous Average Power Output:
16 W × 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD
Bass Control Action (30 Hz):
±13 dB
Treble Control Action (10 kHz):
±10 dB
Line Output Level (MD 1 kHz):
1.8 V
AM Tuner
Frequency Range:
530 kHz to 1710 kHz
Usable Sensitivity:
25 µV
MD Player
Frequency Response (±2 dB):
20 Hz to 20 kHz
Signal to Noise Ratio (1 kHz):
90 dB
Dynamic Range (1 kHz):
85 dB
Harmonic Distortion:
0.01%
General
Power Supply Voltage:
14.4 V DC (10.8 to 15.6 V allowable),
negative ground
Current Consumption:
Less than 15 A
Speaker Impedance:
4 Ω (4 Ω to 8 Ω allowable)
Weight / Source unit:
3.3 lb. (1.5 kg)
Weight / Remote control unit:
1 oz. (30 g) (including battery)
Dimensions / Source unit:
7" (Width) × 2" (Height) × 6-1/8" (Depth)
[178 (W) × 50 (H) × 155 (D) mm]
Dimensions / Remote control unit:
1-3/4" (Width) × 4-5/16" (Height) × 1-1/8" (Depth)
[44 (W) × 110 (H) × 27 (D) mm]
Notes:
• Specifications comply with EIA Standards.
• U.S. and foreign patents licensed from Dolby Laboratories Licensing Corporation.
• Specifications and design are subject to change without notice for further improvement.
RMX465D
19
Memo
20
RMX465D
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising