50281 3 ifs vtvr7200 series ds fin

50281 3 ifs vtvr7200 series ds fin
Laser Diode
calemitters
1
mberoffibers
nectors
cal:
er:
o:
IFS Line / Fiber Transmission
®
ST, SC or FC (see ordering information)
Terminal Block with Screw Clamps
BNC (Gold Plated Center-Pin)
trical&Mechanical
er:
ace Mount:
k:
mber of Rack Slots:
ent Protection:
uit Board:
(in./cm.) (LxWxH)
ace Mount:
k Mount:
ping Weight:
VT/VR7200
Series
12 VDC @ 500 mA (Surface Mount)
From Rack
2
Automatic Resettable Solid-State Current Limiters
Meets IPC Standard
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
< 2 lbs./0.9 kg
IFS 2-Channel Digital Video Multiplexer
ronmental
F:
rating Temp:
age Temp:
tive Humidity:
> 100,000 hours
-40° C to +74° C
-40° C to +85° C
0% to 95% (non-condensing)†
y be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
OVERVIEW
STANDARD FEATURES
The IFS VT/VR7200 Series multiplexers simultaneously transmit
• 8-Bit Digitally Encoded Video Transmission Transmits 2 Real-Time
Color Video Signals
two channels of video over one optical fiber utilizing 8-bit digital
encoding for high-quality video transmission. These products
• Exceeds RS-250C Medium-Haul Transmission Performance
exceed EIARS-250C for Medium-Haul Video Transmission
Standard Directly Compatible with All NTSC, PAL, or SECAM
performance requirement. The modules are universally compatible
CCTV Camera Systems
with major CCTV camera manufacturers. Plug-and-play design
• LED Status Indicators Provide Indication of Critical Operating
ensures ease of installation requiringFibersRequired
no electrical or optical
Parameters
OpticalPwr.Budget
Max.Distance*
adjustments. The modules incorporate Power, Receiver Locked
• Tested and Certified by an Independent Testing Laboratory for Full
and
Video
Presence Status indicating
Compliance with the Environmental Requirements (Ambient
Transmitter
(1310
nm)
7 dB
1 LED’s to monitor proper
1.2 miles
(2 km)*** Mechanical Shock, Vibration, Humidity
Receiver (1310
nm)
system
operation. The modules are available in either stand-alone
Operating
Temperature,
or rack mount versions.
with Condensation, High-Line/Low-Line Voltage Conditions and
Transmitter (1310 nm)
1
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
17 dB
31 miles (51 km)
Receiver (1550/1310 nm)
Specification for Traffic Signal Control Equipment.
• Solid-State Current Limiters on All Power Lines Provide Equipment
ded)
APPLICATION
EXAMPLES
Protection
30 VAC Input (Included if specified at time of order)
• Exceeds NEMA TS-1/TS-2 and Caltrans Traffic Signal Control
No Charge (Requires
•CCTVR3 Rack purchased separately)
Equipment
ctor - (For Single Mode Equipment and Rack Mount only)
ards (Extra charge, consult factory)
• Compatible with Major CCTV Camera Manufactures
or (Single Mode Equipment only)
• No In-field Electrical or Optical Adjustments Required
• bandwidth.
Hot-Swappable Rack Modules
dditional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber
• Automatic Resettable Fuses on all Power Lines
ng
• Comprehensive Lifetime Warranty
System Design
SYSTEM DESIGN
up to 1.2 miles
(2 km)
VT7220
2 Video
Inputs
ifs
203.426.1180
VR7220
International
ifs
Fiber
Systems
Incorporated
1 Fiber
62.5/125m MM
203.426.1180
International
Fiber
Systems
Incorporated
2 Video
Outputs
interlogix.com
VT/VR7200 Series
North America
T 855-286-8889
Latin America
T 561-998-6114
IFS 2-Channel Digital Video Multiplexer
Ordering Information
Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
Multimode 62.5/125µm**
VT7220
2-Channel Video Transmitter (1310 nm)
1
7 dB
1.2 miles (2 km)***
VR7220
2-Channel Video Receiver (1310 nm)
1
7 dB
1.2 miles (2 km)***
Single Mode 9/125µm
VT7230
2-Channel Video Transmitter (1310 nm)
1
17 dB
31 miles (51 km)
VR7230
2-Channel Video Receiver (1550/1310 nm)
1
17 dB
31 miles (51 km)
Accessories ♦
PS12VDC1.5A-U
12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
*** This product may be used with 62.5 µm graded index multimode fiber having a maximum run length of 2 km and/or a maximum optical loss budget of 10 dB.
*All accessories are third party manufactured.
GE
Security
Specifications
Video
Video Input:
1 Volt pk-pk (75 ohms)
Bandwidth:
10 Hz - 6.5 MHz
Differential Gain:
<2%
Differential Phase:
<0.7°
Tilt:
<1%
Signal-to-Noise Ratio (SNR):
>60 dB @ Maximum Optical Loss Budget
Wavelength
1310/1550 nm, Multimode
1310/1550 nm, Single Mode
Optical Emitters
Laser Diode
Number Of Fibers
1
Connectors
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [email protected]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
Optical:
ST
Power:
Terminal Block with Screw Clamps
gesecurity.com/ifs
Video:
BNC (Gold Plated Center-Pin)
Specifications subject to
change without notice
Electrical & Mechanical
Agency Compliance
Power:
Surface Mount:
12 VDC @ 500 mA (Surface Mount)
Rack:
From Rack
Number of Rack Slots:
2
Current Protection:
Automatic Resettable Solid-State Current Limiters
Circuit Board:
Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount:
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount:
7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
Shipping Weight:
< 2 lbs./0.9 kg
Environmental
MTBF:
> 100,000 hours
Operating Temp:
-40° C to +74° C
Storage Temp:
-40° C to +85° C
Relative Humidity:
0% to 95% (non-condensing)
© 2008 General Electric Company
Complies
with
FDA Performance
All Rights
Reserved
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Ordering Information
Part Number
D1010
interlogix.com
D1010WDMA✧
Multimode
D1010WDMB
62.5/125µm**
Specifications subject
to change without
notice.
D1020
© 2014 United Technologies Corporation
All rights
reserved.
D1030
Interlogix is part of UTC Building
& Industrial
Systems, ✧
Single Mode
D1030WDMA
a unit of United
Technologies Corporation.
9/125µm
D1030WDMB
De
RS
RS
RS
RS
RS
RS
RS
VT/VR7200 Series
Accessories♦
PS-12VDC 12 Volt DC Plu
PS-12VDC-230 12 Volt D
Options
Add ‘-R3’ to Model Num
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement