Weslo | Cadence 935 | User`s manual | Weslo Cadence 935 User`s manual

Weslo Cadence 935 User`s manual
¨
Model No. WLTL26080
Serial No.
Write the serial number in the
space above for future reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are
committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satisfaction through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained technicians on our customer hot line
will provide immediate assistance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
Note: A PART LIST and an EXPLODED DRAWING are attached in the center of this manual. Remove the PART
LIST and EXPLODED DRAWING before beginning assembly.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons, read
the following important precautions and information before operating the treadmill.
clothing that could become caught in the
treadmill. Athletic support clothes are recommended for both men and women. Always
wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in
sandals.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described in this
manual.
10. When connecting the power cord (see HOW
TO PLUG IN THE POWER CORD on page 7),
plug the power cord into a surge protector
(not included) and plug the surge protector
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be
on the same circuit.
3. Place the treadmill on a level surface, with
eight feet of clearance behind it. Do not place
the treadmill on a surface that blocks any air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
11. Use only a UL-listed surge protector, rated at
15 amps, with a 14-gauge cord of five feet or
less in length. Do not use an extension cord.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
12. Keep the power cord and the surge protector
away from heated surfaces.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 4 if the treadmill is not working properly.)
7. The treadmill should not be used by persons
weighing more than 250 pounds.
8. Never allow more than one person on the
treadmill at a time.
14. Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.
9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose
2
THE TREADMILL on page 10.) You must be
able to safely lift 45 pounds (20 kg) in order
to raise, lower, or move the treadmill.
15. The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.
21. When storing the treadmill, make sure that
the storage latch is fully closed.
16. The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
22. Inspect and tighten all parts of the treadmill
every three months.
23. Never insert any object into any opening.
17. To reduce the possibility of the treadmill
overheating, do not operate the treadmill
continuously for longer than one hour.
24. Always unplug the power cord before performing the maintenance and adjustment
procedures described in this manual. Never
remove the motor hood unless instructed to
do so by an authorized service representative. Servicing other than the procedures in
this manual should be performed by an
authorized service representative only.
18. Never leave the treadmill unattended while it
is running. Always remove the key when the
treadmill is not in use.
19. Do not change the incline of the treadmill by
placing objects under the treadmill.
25. This treadmill is intended for in-home use
only. Do not use this treadmill in any commercial, rental, or institutional setting.
20. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO MOVE
WARNING:
Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decal shown at the right has been
placed on your treadmill. If the decal is
missing, or if it is not legible, please call
our Customer Service Department, tollfree, to order a free replacement decal
(see ORDERING REPLACEMENT PARTS
on the back cover of this manual). Apply
the decal in the location shown.
3
BEFORE YOU BEGIN
Thank you for selecting the WESLO¨ CADENCE 935
treadmill. The CADENCE 935 treadmill combines
advanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in
the convenience and privacy of your home. And when
youÕre not exercising, the unique CADENCE 935 can
be folded up, requiring less than half the floor space of
other treadmills.
at 1-800-999-3756, Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time (excluding holidays). To
help us assist you, please note the product model
number and serial number before calling. The model
number of the treadmill is WLTL26080. The serial
number can be found on a decal attached to the treadmill (see the front cover of this manual for the location).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
please call our Customer Service Department toll-free
Speed Control
Water Bottle Holder
(Bottle not included)
Accessory Tray
Console
Handrails
Key/Clip
Storage Latch
FRONT
Walking Belt
Foot Rails
Circuit Breaker
BACK
Power Cord
Rear Roller
Adjustment Bolts
Incline Leg
4
RIGHT SIDE
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. The following tools are required for assembly:
a phillips screwdriver
and two adjustable wrenches
(not included).
Console Screw/
Guide Screw (47)Ð6
Upright Bolt (48)Ð2
Base Leg Nut (73)Ð4
Base Leg Washer (70)Ð6
Base Leg Bolt (69)Ð4
Flange Nut (9)Ð2
Handrail Bolt (71)Ð2
Upright Washer (38)Ð2
1. Refer to drawing 2 below. Note that the Console
Base (52) and the Right Handrail (60) are connected
to the treadmill by the Wire Harness (76). During
assembly steps 1 through 3, be careful to avoid
pulling on or damaging the Wire Harness.
1
69
65
70
59
Refer to drawing 1. With the help of a second person, carefully lay the treadmill on its side. Position
one of the Base Legs (64) on the base of the
Upright (59) as shown. Make sure that the Base Leg
Pads (67) and the Front Wheel (65) are in the indicated positions. Attach the Base Leg with two Base
Leg Bolts (69), two Base Leg Washers (70), and two
Base Leg Nuts (73).
73
67
64
73
With the help of a second person, carefully turn the
treadmill onto its other side. Assemble the other
Base Leg (64) as described above.
2
With the help of a second person, carefully raise the
treadmill to the upright position so the Base Legs
(64) are resting flat on the floor.
76
2. Hold the treadmill firmly with both hands, and lower
the treadmill to the floor. To decrease the possibility of injury, bend your legs and keep your back
straight.
5
60
52
3. Insert the bracket on the Left Handrail (61) into the
left Upright (59). While a second person holds the
Console Base (52), carefully insert the Right
Handrail (60) into the right Upright (59). Make sure
that the lower ends of the Handrails (61, 60) are
on the inside of the Base Legs (64) (refer to the
inset drawing).
3
52
76
61
60
Bracket
Loosely thread an Upright Bolt (48) with an Upright
Washer (38) into each Upright (59).
48
38
59
59
Refer to the inset drawing. Insert a Handrail Bolt
(71) with a Base Leg Washer (70) into the right Base
Leg (64) and the Right Handrail (60). Loosely
thread a Flange Nut (9) onto the Handrail Bolt.
Repeat this step with the Left Handrail (not shown).
48
38
60
70
9
71
64
4. Place the Console Base (52) on the Left and Right
Handrails (61, 60). Insert the excess Wire Harness
(not shown) into the top of the right Upright (59), as
you pull the excess Wire Harness (76) out of the
bottom of the Upright (see drawing 6). Attach the
Console Base to the Handrails with four Console
Screws (47).
4
52
61
47
60
47
59
Tighten all parts used in assembly step 3.
5
5. Attach the Frame Guide (86) and the Frame Guide
Spacer (14) to the left side of the Frame (87) with
two Guide Screws (47) as shown. Note: Be careful
not to overtighten the Screws. Make sure that the
thick end of the Frame Guide is at the bottom.
86
47
14
87
Thick end
6. Remove the backing from the Adhesive Clip (78).
Press the Adhesive Clip onto the Upright (59) in the
indicated location. Press the Allen Wrench (68) into
the Adhesive Clip.
6
59
78
68
Insert the excess Wire Harness (76) into the right
Upright (59).
76
7. The console requires two "AA" batteries (not
included); alkaline batteries are recommended.
Open the Battery Cover (56) as shown. Insert two
batteries into the battery compartment, with the negative (Ð) ends of the batteries touching the springs.
Close the battery cover, push up on the battery cover
tab, and then push the tab forward as shown in the
inset drawing. Be sure that the tab locks into place.
8. Make sure that all parts are properly tightened
before you use the treadmill. To protect the floor or
carpet from damage, place a mat under the treadmill.
6
7
56
Batteries
Battery Cover Tab
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBETM WALKING BELT
risk of electric shock. This product is equipped with a
cord having an equipment-grounding conductor and a
grounding plug. Plug the power cord into a surge
protector, and plug the surge protector into an
appropriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
Your treadmill features a walking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking platform. They will deteriorate the walking belt and
cause excessive wear.
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illustrated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole receptacle as shown in drawing 2 if a properly grounded
outlet is not available.
HOW TO PLUG IN THE POWER CORD
DANGER:
Improper connection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the productÑif it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet
box covers are not grounded. Contact a qualified
electrician to determine if the outlet box cover is
grounded before using an adapter.
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your homeÕs power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances being turned on
or off. To decrease the
1
possibility of your
Grounded Outlet Box
treadmill being damTreadmill Power Cord
aged, always use a
Grounding Pin
surge protector (not
included) with your
Grounding Plug
Grounding Plug
treadmill.
Surge protectors are
sold at most hardware
stores and department
stores. Use only a ULlisted surge protector,
rated at 15 amps, with
a 14-gauge cord of five
feet or less in length.
This product must be
grounded. If it should
malfunction or break
down, grounding provides a path of least
resistance for electric
current to reduce the
Grounding Pin
Grounded Outlet
2
Grounded Outlet Box
Adapter
Grounding Pin
Grounding Plug
Lug
Metal Screw
7
Surge Protector
DIAGRAM OF THE CONSOLE
Monitor Display
Pulse Display
Pulse Sensor
Speed Control
Clip
Key
Follow the steps below to operate the console.
CAUTION:
Before operating the
console, read the following precautions.
1
Insert the key fully into the power switch.
Note: Inserting the key
will not turn on the displays. The displays will
turn on when the
DISPLAY button is
pressed or when the
walking belt is started.
If you just installed batteries, the displays will already be on.
¥ Do not stand on the walking belt when turning on the power.
¥ Always wear the clip (see the drawing
above) while operating the treadmill. When
the key is removed from the console, the
walking belt will stop.
¥ Adjust the speed in small increments.
¥ The training zones marked below the speed
control are general guidelines only. See
page 14 or more information.
2
Reset the console and start the walking belt.
Move the speed
control to the
RESET position.
Note: Each time
the walking belt
is stopped, the
speed control
must be moved to the RESET position before
the walking belt can be restarted.
¥ To reduce the possibility of electric shock,
keep the console dry. Avoid spilling liquids
on the console and use only a sealable
water bottle.
STEP BY STEP CONSOLE OPERATION
Before operating the console, make sure that the
power cord is properly plugged in. (See HOW TO
PLUG IN THE POWER CORD on page 7.) In addition,
make sure that batteries are installed in the console.
(See step 7 on page 6.) If there is a thin sheet of clear
plastic on the console, remove it.
Next, slowly move the speed control until the
walking belt begins to move at slow speed.
Carefully step onto the walking belt and begin
exercising. Change the speed of the walking belt
as desired by moving the speed control.
To stop the walking belt, step onto the foot rails
and move the speed control to the RESET position.
Step onto the foot rails of the treadmill. Next, find the
clip attached to the key (see the drawing above). Slide
the clip onto your waistband.
8
3
vatedÑfully press it down. Do not press too hard,
or the circulation in your thumb will be restricted, and your pulse will not be detected. Next,
raise your thumb slightly until the heart-shaped
indicator in the
pulse display
Indicator
flashes steadily.
Follow your progress with the monitor display.
The monitor display
offers six modes
that provide instant
exercise feedback:
¥ SpeedÑThis mode
shows your speed, in miles per hour.
Hold your thumb
at this level. After
a few seconds,
three dashes will
appear in the display and your pulse will be shown.
Hold your thumb on the sensor for another 15 seconds for the most accurate reading.
¥ TimeÑThis mode shows the length of time you
have exercised. Note: If you stop exercising for
ten seconds or longer, the time mode will pause.
¥ Distance (DIST)ÑThis mode shows the total
number of miles you have walked or run, up to
999. The display will then reset to zero and continue counting.
If the displayed pulse appears to be too high or too
low, or if your pulse is not displayed, lift your thumb
off the sensor and allow the display to reset. Press
down again on the sensor as described above.
¥ Fat Calories (FAT CALS)ÑThis mode shows the
approximate number of fat calories you have
burned. (See FAT BURNING on page 14.)
Make sure that your thumb is positioned as shown,
and that you are applying the proper amount of
pressure to the pulse sensor. Try the sensor several times until you become familiar with it.
Remember to stand still while measuring your
pulse.
¥ Calories (CALS)ÑThis mode shows the approximate number of calories you have burned.
¥ ScanÑThis mode displays the other five modes,
for five seconds each, in a repeating cycle.
5
When the power is
turned on, the Scan
mode will be selected. One mode indicator will appear by the
word Òscan,Ó and
Mode Indicators
another mode indicator will show which
mode is currently displayed.
To turn off the power, simply wait for about six
minutes. If the walking belt is stationary and the
console buttons are not pressed for six minutes,
the power will turn off automatically.
HOW TO CHANGE THE INCLINE OF THE
TREADMILL
To vary the intensity of your exercise, the incline of the
treadmill can be changed. There are three different
incline levels. Before changing the incline, remove
the key and unplug the power cord.
If desired, the Speed, Time, Distance, Fat Calories
or Calories mode can be individually selected.
Press the MODE button repeatedly until the
desired mode indicator appears. Make sure that
there is not a mode indicator by the word Òscan.Ó
To change the incline
of the treadmill, first
hold the rear roller
endcap with one hand
and raise the back of
the treadmill a few
inches. Using your
other hand, rotate the
incline leg to one of
the three incline posiIncline
tions. The inset drawLeg
ing at the right shows
the incline leg rotated
to the Òmax fat burnÓ
position. Lower the treadmill, making sure that the
incline leg is resting flat on the floor.
To reset the display, press the DISPLAY button.
4
Turn off the power.
Measure your pulse, if desired.
When you are not using the pulse sensor, a ÒPÓ will
appear in the pulse display. To measure your
pulse, stand on
the foot rails
Pulse
and place your
Sensor
thumb on the
pulse sensor as
shown. The
pulse sensor is
pressure acti-
9
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, unplug the power cord.
Caution: You must be able to safely lift 45 pounds (20
kg) in order to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rather
than your back. Raise the treadmill about halfway to the
vertical position.
2. Move your right hand to the position shown at the right,
and hold the treadmill firmly. Raise the treadmill until the
storage latch locks over the frame guide. If necessary,
turn the Incline leg as you raise the treadmill. Make sure
that the storage latch closes fully over the frame guide.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85¡ Fahrenheit.
Incline
Leg
Storage
Latch
Closed
Frame Guide
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the
storage position as described above. Make sure that the
storage latch is locked fully over the frame guide.
1. Hold the upper ends of the handrails. Place one foot on
one of the front wheels as shown.
2. Tilt the treadmill back until it rolls freely on the front
wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back,
or the base pads may come off. To reduce the risk of
injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an
uneven surface.
3. Place one foot on the base, and carefully lower the treadmill until it is resting in the storage position.
10
Base Leg
Front Wheels
HOW TO LOWER THE TREADMILL FOR USE
1. Hold the upper end of the treadmill with your right hand
as shown. Using your left hand, slide open the storage
latch. Pivot the treadmill until the frame guide and the
foot rail are past the storage latch. If necessary, turn the
incline leg as you raise the treadmill.
Incline
Leg
Storage
Latch
Frame
Guide
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. To decrease the possibility of
injury, bend your legs and keep your back straight.
11
Opened
MAINTENANCE AND TROUBLE-SHOOTING
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please call our Customer Service Department tollfree at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a surge protector, and that the surge protector is
plugged into a properly grounded outlet. (See HOW TO PLUG IN THE POWER CORD on page
7.) Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or
less in length.
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console. See step 1 on page 8.
c. Check the circuit breaker located on the treadmill
frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped.
To reset the circuit breaker, wait for five minutes
and then press the switch back in.
c
Reset
Tripped
Tripped
Reset
PROBLEM: The power turns off during use
SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see the drawing
above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Reinsert the key fully into the console. See step 1 on page 8.
d. If the treadmill still will not run, please call our Customer Service Department, toll-free.
PROBLEM: The displays of the console do not function properly
SOLUTION: a. Check the batteries in the console. If the batteries need to be replaced, see assembly step 8 on
page 6. Most problems are the result of drained batteries.
b. If the speed display does not show a correct reading, remove the key and UNPLUG THE POWER
CORD. Remove the screws from the sides and front
of the hood. Carefully remove the hood. Locate the
Reed Switch (19) and the Magnet (18) on the left
side of the Pulley (89). Turn the Pulley until the
Magnet is aligned with the Reed Switch. Make sure
that the gap between the Magnet and the Reed
Switch is about 1/8Ó. If necessary, loosen the
Screw (44) and move the Reed Switch slightly.
Retighten the Screw. Re-attach the hood and run
the treadmill for a few minutes to check for a correct
speed reading.
12
1/8Ó
19
89
18
44
Top
View
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a. If the walking belt has shifted to the left, first
remove the key and UNPLUG THE POWER CORD.
Using the allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each. Be careful not to overtighten
the walking belt. Plug in the power cord, insert the
key and run the treadmill for a few minutes. Repeat
until the walking belt is centered.
b. If the walking belt has shifted to the right, first
remove the key and UNPLUG THE POWER CORD.
Using the allen wrench, turn the left rear roller
adjustment bolt counterclockwise, and the right bolt
clockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord,
insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.
c. If the walking belt slips when walked on, first
remove the key and UNPLUG THE POWER CORD.
Using the allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking
belt is correctly tightened, you should be able to lift
each side of the walking belt 2 to 3 inches off the
walking platform. Be careful to keep the walking belt
centered. Plug in the power cord, insert the key and
run the treadmill for a few minutes. Repeat until the
walking belt is properly tightened.
a
b
c
PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less
in length.
b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may be
permanently damaged. Remove the key and
UNPLUG THE POWER CORD. Using the allen
wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is
properly tightened, you should be able to lift each
side of the walking belt 2 to 3 inches off the walking
platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run
the treadmill for a few minutes. Repeat until the
walking belt is properly tightened.
b
2ÓÐ3Ó
Rear Roller
Adjustment Bolts
c. If the walking belt still slows when walked on, please call our toll-free Customer Service
Department.
13
CONDITIONING GUIDELINES
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the speed and incline of the treadmill until your
heart rate is near the middle of your training zone. (See
pages 8 and 9.)
WARNING:
Before beginning
this or any exercise program, consult your
physician. This is especially important for
individuals over the age of 35 or individuals
with pre-existing health problems.
The pulse sensor is not a medical device.
Various factors, including your movement,
may affect the accuracy of heart rate readings.
The sensor is intended only as an exercise aid
in determining heart rate trends in general.
High Performance Athletic Conditioning
The following guidelines will help you to plan your exercise program. RememberÑthese are general guidelines only. For more detailed exercise information,
obtain a reputable book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the desired
results is to exercise with the proper intensity. The proper intensity level can be found by using your heart rate
as a guide. To find the proper heart rate for you, first
find your age at the top of the chart below (ages are
rounded off to the nearest ten years). Next, find the two
numbers below your age. The two numbers are your
Òtraining zone.Ó
If your goal is high performance athletic conditioning, set
the speed control on the console to PERFORMANCE to
help you maintain the proper intensity level. Note: During
the first few weeks of your exercise program, keep your
heart rate near the low end of your training zone.
To measure your heart rate during exercise, use the
pulse sensor on the console. If your heart rate is too
high or too low, adjust the speed of the treadmill as
needed.
WORKOUT GUIDELINES
Each workout should include the following three parts:
Warming Up
Start each workout with 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in preparation for exercise.
Training Zone Exercise
After warming up, increase the intensity of your exercise until your pulse is in your training zone for 20 to 60
minutes. (During the first few weeks of your exercise
program, do not keep your pulse in your training zone
for longer than 20 minutes.) Breathe regularly and
deeply as you exerciseÑnever hold your breath.
Fat Burning
To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time. During
the first few minutes of exercise, your body uses easily
accessible carbohydrate calories for energy. Only after
the first few minutes does your body begin to use stored
fat calories for energy. If your goal is to burn fat, adjust
the speed and incline of the treadmill until your heart
rate is near the low end of your training zone. (See
pages 8 and 9.)
Aerobic Exercise
If your goal is to strengthen your cardiovascular system, your exercise must be Òaerobic.Ó Aerobic exercise
14
Cool-down
Finish each workout with 5 to 10 minutes of stretching
to cool down. This will increase the flexibility of your
muscles and will help prevent post-exercise problems.
Exercise Frequency
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months, you may complete up to five workouts each week if desired. The key
to success is to make exercise a regular and enjoyable
part of your everyday life.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown in the
drawings at the right. Move slowly as you stretchÑnever
bounce.
1
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings,
back of knees and back.
2
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for both legs. Stretches:
Hamstrings, lower back and groin.
3
3. Calf/Achilles Stretch
4
With one leg in front of the other, reach forward and place
your hands against a wall. Keep your back leg straight and
your back foot flat on the floor. Bend your front leg, lean forward and move your hips toward the wall. Hold for 15 counts,
then relax. Repeat 3 times for both legs. To cause further
stretching of the achilles tendons, bend your back leg as well.
Stretches: Calves, achilles tendons and ankles.
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for both legs. Stretches: Quadriceps and hip
muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward. Pull your feet toward your groin area as far as possible.
Hold for 15 counts, then relax. Repeat 3 times. Stretches:
Quadriceps and hip muscles.
15
5
PART LISTÑModel No. WLTL26080
Key No.
Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16*
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
2
6
2
2
2
2
1
3
2
1
16
1
14
1
1
1
1
1
1
1
4
16
6
1
1
1
1
1
1
1
4
1
1
1
1
1
1
7
2
2
2
1
1
1
2
1
6
2
16
1
Description
Incline Leg Bolt
Incline Leg Pad
Incline Leg
Incline Leg Plate
Incline Leg Bushing
Incline Leg Bracket
Left Foot Rail
8Ó Cable Tie
Flange Nut
Tie Clamp
Screw
Releaseable Cable TIe
Small Screw
Frame Guide Spacer
Motor Hood
Motor/Pulley/Flywheel/Fan
Motor Belt
Magnet
Reed Switch
Reed Switch Clip
Hood Anchor
Anchor Screw/Base Pad Screw
Frame Pivot Nut
Motor
Pulley/Flywheel/Fan
Motor Tension Bolt
Motor Tension Washer
Motor Star Washer
Motor Tension Nut
Motor Pivot Bolt
Wire Clip
Controller
Electronics Bracket
Power Cord
Grommet
Circuit Breaker
Front Roller Adj. Bolt
Upright Washer/Adj. Washer
Upright Spacer
Choke Screw
Latch Spring
Storage Latch
Latch Bracket
Reed Switch Screw
Cage Nut
Latch Spacer
Console Screw/Guide Screw
Upright Bolt
Console Base Screw
Rear Endcap
R0798A
Key No.
Qty.
51
52*
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
#
#
1
1
1
1
1
1
2
1
1
1
1
2
2
2
2
2
4
1
4
6
2
8
4
2
1
1
2
1
10
1
1
1
1
8
1
2
1
1
1
1
1
2
1
1
2
2
2
1
1
1
Description
Choke
Console Base Assembly
Motor Pivot Nut
Speed Control Knob
Speed Potentiometer
Battery Cover
Belt Guide
Key/Clip
Upright Base
Right Handrail
Left Handrail
Frame Pivot Bolt
Wheel Nut
Base Leg
Front Wheel
Wheel Bolt
Base Leg Pad
Allen Wrench
Base Leg Bolt
Base Leg Washer
Handrail Bolt
Walking Platform Screw
Base Leg Nut
Base Leg Cap
Upright Grommet
Wire Harness
Ground Screw
Wrench Clip
Frame Pivot Washer
Upright Plug
Right Foot Rail
Interface Bracket
Belly Pan
Isolator
Rear Belly Pan
Frame Guide
Frame
Incline Rod
Front Roller/ Pulley
Walking Platform
Walking Belt
Rear Roller Adj. Nut
Rear Roller
Ground Wire
Rear Roller Guard
Endcap Bolt
Rear Roller Adj. Bolt
Latch Decal
14Ó White Wire, Male/Female
UserÕs Manual
Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of the userÕs manual for information about ordering replacement parts.
97
2
78
6
5
2
95 96
38
68
3
1
38
12
50
2
10
49
97
96
95
4
38
98
11
8
11
95
13
47
38
92
93
70
14
94
86
7
77
92
95
70
84
13
5
11
11
11
6
3
2
13
88
70
15
2
87
4
13
91
90
18
19
17
1
2
74
70
64
71
23
21
22
48
49
44
53
24
28
85
27
25
84
89
20
86
81
16*
26
67
22
70
69
13
82
29
11
83
31
22
67
66
21
57
22
38
37
63
65
13
34
22
21
32
35
36
11
30
EXPLODED DRAWINGÑModel No. WLTL26080
61
39
11
33
11
9
45
51
49
41
40
R0798A
43
46
79
73
80
62
42
47
52*
77
76
73
22
48
38
74
75
60
9
39
49
67
58
54
70
71
22
73
76
55
49
62
70
64
79
59
38
49
56
69
63
48
47
66
67
22
65
ORDERING REPLACEMENT PARTS
To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give the following information when calling:
¥ The MODEL NUMBER of the product (WLTL26080).
¥ The NAME of the product (WESLO CADENCE¨ 935 treadmill).
¥ The SERIAL NUMBER of the product (see the front cover of this manual).
¥ The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and the EXPLODED
DRAWING at the center of this manual).
WESLO is a registered trademark of ICON Health & Fitness, Inc.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not
extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,
improper or abnormal usage or repairs not provided by an ICON authorized service center, products used
for commercial or rental purposes, or products used as store display models. No other warranty beyond
that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 145451 H01309AC R0798A
Printed in USA © 1998 ICON Health & Fitness, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising