Elation | ELED PAR RGB ZOOM | Operating instructions | Elation ELED PAR RGB ZOOM Operating instructions

Elation ELED PAR RGB ZOOM Operating instructions
ELED Par RGB Zoom
Introduction
Unpacking: Thank you for purchasing the ELED Par RGB Zoom by
ELED PAR RGB ZOOM
Elation Professional®. Every ELED Par RGB Zoom has been thoroughly
tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during
shipping. If the carton appears to be damaged, carefully inspect your
fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact. In the case damage has been found or
parts are missing, please contact our customer support number for
further instructions. Do not return this unit to your dealer without first
contacting customer support.
Introduction: The ELED Par RGB Zoom is part of Elation Professionals® continuing pursuit for creating high quality affordable intelligent
fixtures. The ELED Par RGB Zoom is a powerful, bright DMX intelligent
LED wash. This unit can be used as a stand alone unit or in a masterslave configuration. The unit has nine operating modes to choose from,
as well as a zoom adjustment feature. The zoom adjustment allows you
to control the range or size of the wash output.
Customer Support: ©Elation® provides a customer support line, to
provide set up help and to answer any question should you encounter
problems during your set up or initial operation. You may also visit us
on the web at www.elationlighting.com for any comments or suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m.
Pacific Standard Time.
Voice:
(323) 582-3322
Fax: (323) 832-9142
E-mail: support@elationlighting.com
Warning! To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
User Instructions
Elation Professional®
©
Rev. 7/10
6122 S. Eastern Ave.
Los Angeles CA. 90040
www.elationlighting.com
attempt any repairs yourself, doing so will void your manufactures warranty. In the unlikely event your unit may require service please contact
©Elation customer support.
PLEASE recycle the shipping carton when ever possible.
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 2
ELED Par RGB Zoom General Instructions
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
ELED Par RGB Zoom Features
•
•
•
•
•
•
Multi-Colors
Adjustable Zoom
Built in Microphone
Nine Operating Modes
DMX-512 protocol
4 DMX Channel Modes: 3 Channel Mode, 5 Channel Mode,
6 Channel Mode, & 7 Channel Mode
• Daisy Chain Units Together in DMX Mode
ELED Par RGB Zoom
Warranty Registration
The ELED Par RGB Zoom carries a two year limited warranty. Please
fill out the enclosed warranty card to validate your purchase. All
returned service items whether under warranty or not, must be freight
pre-paid and accompany a return authorization (R.A.) number. The
R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number
must also be written down on a piece of paper included in the shipping carton. If the unit is under warranty, you must provide a copy of
your proof of purchase invoice. You may obtain a R.A. number by contacting our customer support team on our customer support number.
All packages returned to the service department not displaying a R.A.
number on the outside of the package will be returned to the shipper.
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 3
ELED Par RGB Zoom
Safety Precautions
•To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture
•Do not spill water or other liquids into or on to your unit.
•Be sure that the local power outlet match that of the required volt-
age for your unit.
•Do not attempt to operate this unit if the power cord hasbeen
frayed or broken. Do not attempt to remove or break off the ground
prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short.
•Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user serviceable parts inside.
•Never operate this unit when it’s cover is removed.
•Never plug this unit in to a dimmer pack
•Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall.
•Do not attempt to operate this unit, if it becomes damaged.
•This unit is intended for indoor use only, use of this product out`
doors voids all warranties.
•During long periods of non-use, disconnect the unit’s main power.
•Always mount this unit in safe and stable matter.
•Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the point they exit from the unit.
• Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 17 for cleaning details.
•Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
•The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked change in performance.
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 4
SOUND
REMOTE
CONTROL
INPUT
INPUT
OUTPUT
ELED Par RGB Zoom
Set Up
Power Supply: The Elation ELED Par RGB Zoom contains an electronic ballast, which will auto sense the voltage when it is plugged into
the power source. With the electronic ballast you do not need to worry
about wall voltage, this unit can be plugged in anywhere.DMX512
Also be sure
DMX+,DMX-,COMMON
to only use the included I.E.C. power cable supplied with the unit.
POWER
DMX-512: DMX is short for Digital Multiplex. This is a universal pro-
tocol used as a form of communication between intelligent fixtures
and controllers. A DMX controller sends DMX data instructions from
the controller to the fixture. DMX data is sent as serial data that travCOMMON
els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR terDMX +
DMX512 OUT
XLR have a DATA
minals located on all DMX fixtures (most controllers3-PIN
only
DMX “OUT” terminal).
DMX Linking: DMX is a language allowing all makes and models of
different manufactures to be linked together and operate from a single
controller, as long as all fixtures and the controller are DMX compliant. To ensure proper DMX data transmission, when using several
DMX fixtures try to use the shortest cable path possible. The order
in which fixtures are connected in a DMX line does not influence the
DMX addressing. For example; a fixture assigned a DMX address of 1
may be placed anywhere in a DMX line, at the beginning, at the end,
or anywhere in the middle. When a fixture is assigned a DMX address
of 1, the DMX controller knows to send DATA assigned to address 1
to that unit, no matter where it is located in the DMX chain.
1
2
REMOTE
CONTROL
INPUT
SOUND
3
Data Cable (DMX Cable) Requirements (For DMX Operation):
INPUT
OUTPUT
REMOTE
CONTROL
INPUT
SOUND
INPUT
OUTPUT
ELED Par RGB Zoom
Set Up
Special Note: Line Termination. When longer runs of cable are
POWER
POWER
used, you may need to use a terminator on the last unit to avoid erratic
behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is connected between pins 2 and 3 of a male XLR connector (DATA + and
DATA -). This unit is inserted in the female XLR connector of the last
unit in your daisy chain to terminate the line. Using a cable terminator
(ADJ part number Z-DMX/T) will decrease the possibilities of erratic
behavior.
3
1
2
DMX512 IN
3-PIN XLR
3
1
2
Termination reduces signal errors and
avoids signal transmission problems
and interference. It is always advisable
to connect a DMX terminal, (Resistance
120 Ohm 1/4 W) between PIN 2 (DMX-)
and PIN 3 (DMX +) of the last fixture.
5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX-
512 data cables for DATA transmission in place of 3-pin. 5-pin DMX
fixtures may be implemented in a 3-pin DMX line. When inserting
standard 5-pin data cables in to a 3-pin line a cable adaptor must be
used, these adaptors are readily available at most electric stores. The
chart below details a proper cable conversion.
3-Pin XLR to 5-Pin XLR Conversion
Conductor
3-Pin XLR Female (Out)
5-Pin XLR Male (In)
Ground/Shield
Pin 1
Pin 1
Data Compliment (- signal)
Pin 2
Pin 2
Data True (+ signal)
Pin 3
Pin 3
Not Used
Do Not Use
Not Used
Do Not Use
The ELED Par RGB Zoom can be controlled via DMX-512 protocol. The
ELED Par RGB Zoom has 4 DMX channel modes. A 3 Channel Mode, 5
Channel Mode, 6 Channel Mode, & 7 Channel Mode. The DMX address
is set electronically using the controls on the rear panel of the unit. Your
unit and your DMX controller require a approved DMX-512 110 Ohm
Data cable for data input and data output. We recommend Accu-Cable
DMX cables. If you are making your own cables, be sure to use standard
110-120 Ohm shielded cable (This cable may be purchased at almost
all professional sound and lighting stores). Your cables should be made
with a male and female XLR connector on either end of the cable. Also
remember that DMX cable must be daisy chained and cannot be split.
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 5
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 6
ELED Par RGB Zoom
Operating Instructions
Operating Modes: The ELED Par RGB Zoom has nine modes of operation
with zoom control:
• Static Mode - Choose one of 32 colors to remain static.
• RGB Mode - Adjust the intesity of each RGB color.
• Three Color Change mode - In this mode the unit will scroll through RGB colors. The speed of the scroll is adjustable.
• Seven Color Change mode - In this mode the unit will scroll through the seven available colors. The speed of the scroll is adjustable.
• Three Color Fade mode - In this mode the unit will fade through RGB colors. The speed of the fade is adjustable.
• Seven Color Fade mode - In this mode the unit will fade through the seven available colors. The speed of the fade is adjustable.
• Auto Mode - In this mode the scroll mode and fade mode will both run. The amount of program cycles can be adjusted and set.
• Sound-Active mode - The unit will react to sound, chasing through the
available colors.
• DMX control mode - This function will allow you to control each individual fixtures traits with a standard DMX 512 controller such as the Elation® Show Designer™.
Zoom Adjustment:
With this feature you can adjust the wash output. The output is adjustable
between 10˚ - 60˚.
1. Plug the fixture in and press the MODE button for at least 3 seconds, until “O.T.O.r.” is displayed.
2. After “O.T.O.r.” is displayed the unit will display “C.X.X.X.”. Press the UP or DOWN buttons to adjust the wash output (zoom). The zoom can be adjusted between 000-190.
3. To exit this setting, press the MODE button for at least 3 seconds.
Master-Slave Operation:
This function will allows you to link units together to run in a Master-Slave
mode. In Master-Slave operation one unit will act as the controlling unit and
the others will react to the controlling units built-in programs. Any unit can
act as a Master or as a Slave however, only one unit can be programmed to
act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit. Use standard XLR microphone cables to link your units together. Remember that the Male XLR connector is the input and the Female XLR connec-
tor is the ouput. The first unit in the chain (master) will use the female XLR connector only. The last unit in the chain will use the male XLR con-
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 7
ELED Par RGB Zoom
Operating Instructions
nector only.
2. Set the “Master” unit to your desired operating mode.
3. For the “Slave” unit(s), press the UP or DOWN buttons until “SLAv.” is displayed.
4. Connect the “Slave” unit or units and they will automatically start to fol-
low the “Master.”
Auto Mode:
1. Plug the fixture in and press the MODE button until “AUTO” is displayed. The unit will now run its auto program.
2. Press the SET UP button and the display will show n.xxx. Press the UP or DOWN button to adjust the amount of program cycles.
Sound Active Mode:
1. Plug the fixture in and press the MODE button until “SU.XX” is displayed.
2. Use the UP or DOWN buttons to adjust the sound sensitivity. “00” being the least sensitive, “31” the most sensitive.
3. The fixture will now change via sound.
Static Mode:
1. Plug the fixture in and press the MODE button until “CL.XX” is displayed.
2. There are 32 color to choose from. Select your desired color by pressing the UP and DOWN buttons.
RGB Mode:
1. Plug the fixture in and press the MODE button until “r.XXX” is displayed. You are now in RGB mode. Press the SET UP button to scroll through the RGB mode. “r.XXX” is red, “G.XXX” is green, and “b.XXX” is blue.
2. Adjust the intensity of each individual color by pressing the UP and DOWN buttons.
Three Color Change Mode: Note:
1. Plug the fixture in and press the MODE button until “JPXX” is displayed.
2. Use the UP or DOWN buttons to adjust the scroll speed.
Seven Color Change Mode: Note:
1. Plug the fixture in and press the MODE button until “JPXX” is displayed. Press the SET UP button, and “JP.XX” will be displayed. Notice the
period between the letters and numbers, this lets you know you are in Seven Color Change Mode.
2. Use the UP or DOWN buttons to adjust the scroll speed.
Three Color Fade Mode: Note:
1. Plug the fixture in and press the MODE button until “FdXX” is displayed.
2. Use the UP or DOWN buttons to adjust the fade speed.
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 8
ELED Par RGB Zoom
Operating Instructions
Seven Color Fade Mode: Note:
1. Plug the fixture in and press the MODE button until “FdXX” is displayed. Press the SET UP button, and “Fd.XX” will be displayed. Notice the
period between the letters and numbers, this lets you know you are in Seven Color Fade Mode.
2. Use the UP or DOWN buttons to adjust the fade speed.
ELED Par RGB Zoom
Channel
Value
1
0
1-7
8 - 15
16 - 23
24 - 31
32 - 39
40 - 47
48 - 55
56 - 63
64 - 71
72 - 79
80 - 87
88 - 95
96 - 103
104 - 111
112 - 119
120 - 127
128 - 135
136 - 143
144 - 151
152 - 159
160 - 167
168 - 175
176 - 183
184 - 191
192 - 199
200 - 207
208 - 215
216 - 223
224 - 231
232 - 239
240 - 247
248 - 255
DMX Mode:
Operating through a DMX controller gives the user the freedom to create
their own programs tailored to their own individual needs. The ELED Par
RGB Zoom has 4 DMX channel modes. See pages 10-12 for the DMX channel modes traits and values.
1. This function will allow you to control each individual fixture’s traits with a standard DMX 512 controller such as the Elation® Show Designer™ or the Elation® DMX Operator™.
2. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any standard DMX controller.
3. Press the MODE button until “dP.-X” is displayed. “X” represents the number that is displayed.
4. Press the UP or DOWN buttons to find your desired DMX Mode. The DMX Modes are as follows: “dP.-1” is 3 Channel Mode, “dP.-2” is
5 Channel Mode, “dP.-3” is 6 Channel Mode, & “dP.-4” is 7 Channel Mode.
5. Once your have found your desired DMX mode press the SET UP but-
ton. The DMX addressing will now be displayed, press the UP or DOWN buttons to adjust the DMX address.
6. When you have set your desired DMX address connect XLR cable to the DMX In jack. Your are now ready to run in DMX mode.
7. Please see pages 10-12 for DMX values and traits
2
0 - 255
3
1 - 255
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 9
3 Channel - DMX Traits
Function
COLOR MACROS
OFF
BASTARD AMBER
MEDIUM AMBER
PALE AMBER GOLD
GALLO GOLD
GOLDEN AMBER
LIGHT RED
MEDIUM RED
MEDIUM PINK
BROADWAY PINK
FOLLIES PINK
LIGHT LAVENDER
SPECIAL LAVENDER
LAVENDER
INDIGO
HEMSLEY BLUE
TIPTON BLUE
LIGHT STEEL BLUE
LIGHT SKY BLUE
SKY BLUE
BRILLIANT BLUE
LIGHT GREEN BLUE
BRIGHT BLUE
PRIMARY BLUE
CONGO BLUE
PALE YELLOW GREEN
MOSS GREEN
PRIMARY GREEN
DOUBLE CTB
FULL CTB
HALF CTB
DARK BLUE
WHITE
ZOOM
10˚ - 60˚
MASTER DIMMER
0% - 100%
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 10
ELED Par RGB Zoom
Channel
Function
1 - 255
RED
0% - 100%
1
1 - 255
GREEN
0% - 100%
2
1 - 255
BLUE
0% - 100%
3
ZOOM
10° - 60°
MASTER DIMMER
0% - 100%
4
2
3
0 - 255
5
1 - 255
ELED Par RGB Zoom
Channel
ELED Par RGB Zoom
Value
1
4
5 Channel - DMX Traits
6 Channel - DMX Traits
Value
Function
1 - 255
RED
0% - 100%
1 - 255
GREEN
0% - 100%
1 - 255
BLUE
0% - 100%
1
2
3
4
1 - 255
5
0 - 255
6
1 - 255
Channel
Value
Function
1 - 255
RED
0% - 100%
1 - 255
GREEN
0% - 100%
1 - 255
BLUE
0% - 100%
1 - 255
5
1 - 255
6
7 Channel - DMX Traits
0 - 255
7
1 - 255
COLOR MACROS
PLEASE SEE CHANNEL 1 MODE
STROBING
SLOW - FAST
ZOOM
10° - 60°
MASTER DIMMER
0% - 100%
COLOR MACROS
PLEASE SEE CHANNEL 1 MODE
ZOOM
10° - 60°
MASTER DIMMER
0% - 100%
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 11
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 12
ELED Par RGB Zoom
10° Degree Photometric Charts
ELED Par RGB Zoom
Red
Blue
Green
RGB Full On
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 13
10° Degree Photometric Charts
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 14
ELED Par RGB Zoom
60° Degree Photometric Charts
ELED Par RGB Zoom
Red
Blue
Green
RGB Full On
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 15
60° Degree Photometric Charts
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 16
ELED Par RGB Zoom
Fuse Replacement
The fuse holder is located at the rear of the unit above the power
cord. Disconnect from the main power supply. Insert a standard flat
head screw driver in to the fuse holder housing, turn the screwdriver
in counter-clockwise direction to remove the fuse holder. Remove the
old fuse and discard it, replace the fuse with the same type. Insert the
fuse back into it’s housing.
ELED Par RGB Zoom
Cleaning
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
ELED Par RGB Zoom
Trouble Shooting
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on some other DMX devices pin 2 may be ‘hot’). Also, check that all cables are connected to the right connectors; it does matter which way the inputs and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
ELED Par RGB Zoom
2-YEAR LIMITED WARRANTY
Warranty
A. Elation Professionals® hereby warrants, to the original purchaser, Elation Professionals® products to be free of manufacturing defects in material and workmanship
for a period of two years (730 days) from the date of purchase. This warranty shall be
valid only if the product is purchased within the United States of America, including
possessions and territories. It is the owner’s responsibility to establish the date and
place of purchase by acceptable evidence, at the time service is sought.
B. For warranty service, send the product only to the Elation Professionals® factory.
All shipping charges must be pre-paid. If the requested repairs or service (including
parts replacement) are within the terms of this warranty, Elation Professionals® will
pay return shipping charges only to a designated point within the United States. If the
entire instrument is sent, it must be shipped in its original package. No accessories
should be shipped with the product. If any accessories are shipped with the product,
Elation Professionals® shall have no liability whatsoever for loss of or damage to any
such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which Elation Professionals® concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced
by anyone other than the Elation Professionals® factory unless prior written authorization was issued to purchaser by Elation Professionals®; if the product is damaged
because not properly maintained as set forth in the instruction manual.
D. This is not a service contract, and this warranty does not include maintenance,
cleaning or periodic check-up. During the period specified above, Elation Professionals® will replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The
sole responsibility of Elation Professionals® under this warranty shall be limited to the
repair of the product, or replacement thereof, including parts, at the sole discretion
of Elation Professionals®. All products covered by this warranty were manufactured
after January 1, 1990, and bear identifying marks to that effect.
E. Elation Professionals® reserves the right to make changes in design and/or
improvements upon its products without any obligation to include these changes in
any products theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any
accessory supplied with products described above. Except to the extent prohibited
by applicable law, all implied warranties made by Elation Professionals® in connection with this product, including warranties of merchantability or fitness, are limited in
duration to the warranty period set forth above. And no warranties, whether expressed
or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and or Dealer’s sole remedy shall
be such repair or replacement as is expressly provided above; and under no circumstances shall Elation Professionals® be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 17
G. This warranty is the only written warranty applicable to Elation Professionals®
Products and supersedes all prior warranties and written descriptions of warranty
terms and conditions heretofore published.
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 18
ELED Par RGB Zoom
Specifications
Model: ELED Par RGB Zoom
SPECIFICATIONS:
Working Position: Voltage: LED’s:
Power Consumption:
Fuse:
Beam Angle:
Weight: Dimensions: Colors:
DMX Channels:
Warranty:
Any safe working position
90V ~ 240V/50~60Hz
24 x 3 Watt LED’s (8 Red, 8 Green,
and 8 Blue)
80W
2 Amp
10-60 Degrees
12lbs./ 5.5Kgs.
15” (L) x 10.15” (W) x 8.15” (H)
370 x 270 x 220mm
RGB Color Mixing
4 DMX Channel Modes: 3 Channel Mode, 5 Channel Mode, 6 Channel Mode, & 7 Channel Mode.
2 Year (730 days)
Auto Sensing Voltage: This fixture contains a electronic bal-
last, which will auto sense the voltage when it is plugged into the
power source.
Please Note: Specifications and improvements in the design of
this unit and this manual are subject to change without any prior
written notice.
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 19
©Elation Professionals®
A Division of the AmericanDJ® Group of Companies
World Headquarters:
6122 S. Eastern Ave. Los Angeles, CA 90040 USA
Tel: 323-582-3322 Fax: 323-832-9142
Web: www.elationlighting.com E-mail: info@elationlighting.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising