Daewoo | SH-7500D | Instruction manual | Daewoo SH-7500D Instruction manual

Daewoo SH-7500D Instruction manual
DVD Player + Video Cassette Recorder
SH-7500D
STANDBY/ON
VIDEO
L AUDIO R
EJECT
REC
SELECT
STOP
AV INPUT
REW PLAY/PAUSE FF
OPEN/CLOSE
Please read this manual carefully before connecting your DVD+VCR and operating it
for the first time.
Keep the manual in a safe place for future reference.
INSTRUCTION MANUAL
P/N: 97P95600D0-6J
Downloaded From Disc-Player.com Daewoo Manuals
Product information
Contents
Product Information
DVD Operation
Important Safeguards ..................................................... 2
Advantages of This Product Are .... ............................ 5
Read Carefully before Using ......................................... 6
Identification of Controls ............................................... 7
Remote Control .............................................................. 11
Playing a desired scene ................................................ 37
Confirming the current PLAY mode on screen ....... 41
Selecting an AUDIO language, SUBTITLE language
and 3D AUDIO ............................................................... 43
Selecting ZOOM and Multi Angle.............................. 44
About MP3 ,CDDA, JPG and MPG discs .................. 45
Displaying menus in a disc, Progressive Scan Mode. .. 49
Installation
Connecting up your player with RF lead .................. 12
Connecting with Other VCR or Camcorder ............. 14
Connecting with Audio .................................................16
Connecting to a television with Component jack and a
Dolby Digital Amp. ....................................................... 17
Set-up
Language Setup .............................................................. 50
Video Setup ......................................................................52
Audio Setup..................................................................... 53
Others Setup ................................................................... 54
Basic Operation
Initial Installation ........................................................... 18
Setting time and date, OSD ON & OFF ..................... 20
Output Select .................................................................. 21
DVD Playback ................................................................ 22
VCR Playback ................................................................ 23
Recording ........................................................................ 24
The others
About DVD...................................................................... 56
Basic information about VCR and Videotape.......... 58
Trouble Shooting (VCR)................................................ 59
Trouble Shooting (DVD) .............................................. 61
Specifications .................................................................. 62
VCR Operation
Tuning in New Stations ................................................ 27
Timer Recording ............................................................ 30
More Functions .............................................................. 32
Connections and Copying ........................................... 35
1
Downloaded From Disc-Player.com Daewoo Manuals
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safeguards
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and servicing
instructions in the literature accompanying the
appliance.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
This set has been designed and manufactured to assure
personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in
this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit 9
is fully transistorized and does not contain any parts
that can be repaired by the user.
1
READ INSTRUCTIONS
All the safety and operating instructions should be
read before the unit is operated.
2
RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
3
HEED WARNINGS
All warnings on the unit and in the operating
instructions should be adhered to.
IMPORTANT FOR LASER PRODUCTS
• LASER :
This Digital Video Disc Player employs a Laser System. To ensure proper use of this product
please read this instruction manual carefully and retain for future reference. Should the unit
require maintenance, contact an authorized service location - see service procedure.
Use of control adjustments or the performance of procedures other than those specified
may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser
radiation when open and interlocks defeated.
DO NOT STARE INTO THE BEAM.
• DANGER : Visible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.
• CAUTION : Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to
qualified service personnel.
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
4
FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
5
CLEANING
Unplug this unit from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6
7
CAUTION: Any changes or modification in construction of this device which are not expressly approved by
the party responsible for compliance could void the user’s authority to operate the equipment.
8
• Make sure the unit should be placed at least 8cm apart from the other home appliances or the
obstacles to get sufficient ventilation.
• This unit shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on this unit.
• Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the
mains, you have to unplug it.
• The system is not completely disconnected from the mains when the / I button is set to
the position.
2
Downloaded From Disc-Player.com Daewoo Manuals
Product
Productinformation
information
Important Safeguards
with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart
combination to overturn.
VENTILATION
Slots and openings in the case are provided for
ventilation to ensure reliable operation of the unit
and to protect it from overheating. These openings
must not be blocked or covered. These openings
must not be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should
never be placed near or over a radiator or heat
radiator. This unit should not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
10 POWER SOURCES
This unit should be operated only from the type of
power source indicated on the marking label. If
you are not sure of the type of power supply to
your home, consult your dealer or local power
company. For units intended to operate from
battery power, or other sources, refer to the
operating instructions.
11 GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating current line plug (a plug having one blade wider
ATTACHMENTS
than the other). This plug will fit into the power
Do not use attachments unless recommended by
outlet only one way.
the unit’s manufacturer as they may cause
This is a safety feature. If you are unable to insert
hazards.
the plug fully into the outlet, try reversing the
plug. If the plug still fails to fit, contact your
WATER AND MOISTURE
electrician to replace your obsolete outlet.To
Do not use this unit near water- for example, near
prevent electric shock, do not use this polarized
a bath tub, wash bowl, kitchen sink or laundry tub,
plug with an extension cord, receptacle, or other
in a wet basement, or near a swimming pool.
outlet unless the blades can be fully inserted
without blade exposure. If you need an extension
PORTABLE CART WARNING
ACCESSORIES
cord, use a polarized cord.
(symbol provided by RETAC)
Do not place this unit on an
unstable cart, stand, tripod,
12 POWER-CORD PROTECTION
bracket, or table. The unit may
Power-supply cords should be routed so that they
fall, causing serious injury to
are not likely to be walked on or pinched by items
a child or adult as well as serious damage to the
placed upon or against them, paying particular
unit. Use this unit only with a cart, stand , tripod,
attention to cords at plugs, convenience
bracket, or table recommended by the
receptacles, and the point where they exit from the
manufacturer.
unit.
8A
A unit and cart combination should be moved
3
13 LIGHTNING
For added protection for this unit during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable
system. This will prevent damage to the unit due
to lightning and power line surges.
14 DISC TRAY
Keep your fingers well clear of the disc as it is
closing. It may cause serious personal injury.
15 OVERLOADING
Do not overload wall outlets of extension cords as
this can result in a risk of fire or electric shock.
16 OBJECT AND LIQUID ENTRY
Never push objects of any kind into this unit
through openings as they may touch dangerous
voltage points or “short-out” parts that could
result in a fire or electric shock. Never spill liquid
of any kind on the unit.
Product information
Important Safeguards
Advantages of This Product Are .....
only those controls that are covered by the
operating instructions. Improper adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the unit to its normal
operation.
E. If the unit has been dropped or the cabinet has
been damaged.
F. When the unit exhibits a distinct change in
performance-this indicates a need for service.
21 REPLACEMENT PARTS
When replacement parts are required, have the
service technician verify that the replacements he
uses have the same safety characteristics as the
original parts. Use of replacements specified by the
unit manufacturer can prevent fire, electric shock,
or other hazards.
22 SAFETY CHECK
Upon completion of any service or repairs to this
unit, ask the service technician to perform safety
checks recommended by the manufacturer to
determine that the unit is in safe operating
condition.
17 BURDEN
Do not place a heavy object on or step on the
product. The object may fall, causing serious
personal injury and serious damage to the product. 23 WALL OR CEILING MOUNTING
The product should be mounted to a wall or
18 DISC
ceiling only as recommended by the manufacturer.
Do not use a cracked, deformed or repaired disc.
These discs are easily broken and may cause
24 HEAT
serious personal injury and product malfunction.
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
19 SERVICING
other products (including amplifiers) that produce
Do not attempt to service this unit yourself as
heat.
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
25 To prevent battery electrolyte leakage, which may
servicing to qualified service personnel.
result in injury and damage to the unit or other
objects, observe the following precautions:
20 DAMAGE REQUIRING SERVICE
A. All batteries must be installed with the
Unplug this unit from the wall outlet and refer
proper polarity.
servicing to qualified service personnel under the
B. Do not mix new with old or used batteries.
following conditions.
C. Only use batteries of the same type and brand.
D. Remove the batteries when they are not to be
A. When the power-supply cord or plug is
used for a long period time.
damaged.
E. When the batteries have become discharged,
B. If liquid has been spilled, or objects have fallen
they must be disposed of in a safe manner
into the unit.
which complies with all applicable laws.
C. If the unit has been exposed to rain or water.
D. If the unit does not operate normally by
following the operating instructions. Adjust
4
Downloaded From Disc-Player.com Daewoo Manuals
•
•
•
•
•
•
•
•
DVD, VCD, CD, CD-R(MP3), CD-RW, VHS
Watching DVD for recording broadcast
Integrated remote control (VCR, DVD)
VISS function
Multiplex sound playback/record
High Sound Quality of 6 head Hi-Fi
Simple record function
MP3 file playback function (CD-R disc
having records of MP3 files)
• GUI (Graphical User Interface) through
OSD (On Screen Display)
By using the [DISPLAY] button on the remote
control, information on the DVD/VCD/CD
player and disc, can be displayed on the TV
screen.
• Screensaver function (DVD)
• 3D sound (3D sound effect using 2 speakers)
• High bit / High sampling with 27MHz /
10bit video encoder
• High bit / High sampling with 96MHz /
24bit Audio D/A Converter
• Coaxial, Optical digital Audio output (PCM,
Dolby Digital, dts)
You can enjoy high-level digital audio by
connecting with amp embedded with Dolby
Digital / dts decoder.
• Built-in Dolby Digital decoder (DVD)
• Analog audio 2-channels output for
DOWNMIX (x1)
• Composite video output (x1)
• Slow Forward / Reverse playback (DVD)
• Fast Forward / Reverse playback
• Search of title, chapter, and time in DVD
disc, and search of time and track time in
VCD.
• Various TV aspect (DVD)
• Selective Play (DVD/VCD/CD)
You can select and play the desired title / chapter
of DVD and track of Video CD/CD in STOP
mode.
• 4 languages OSD (On Screen Display)
function (DVD)
You can select and display OSD in 4 languages.
(English/ Russian/ Czech/ Hungarian)
• Parental Lock function (DVD)
This function can prevent playback of software
that may be unsuitable for children.
• Multi Audio function (DVD)
The audio soundtrack can be heard in up to 8
languages. In the case of SVCD or VCD, it
depends on the disc. (The number of audio
languages depends on the software.)
• Multi Subtitle function (DVD)
The subtitle can be seem in up to 32 languages.
In the case of SVCD or VCD, it depends on the
disc. (The number of subtitle languages depends
on the software.)
• Multi Angle function (DVD)
This function allows you to choose the viewing
angle of scenes which were shot from a number
of different angles. (The number of angles
depends on the software.)
• Screen zoom function (DVD/VCD)
4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9
for Wide
• Repeat playback (title, chapter, and part for
DVD/ track, disc, and part for VCD/CD)
5
Cautions in use of DVD-Video player are described
below.
Please read carefully before using a DVD-Video player.
and maintenance every 1,000 hours of use by
technical engineers.
• For checking, contact your dealer or your
nearest service center.
Product information
Read Carefully before Using
Identification of Controls
Main body (front panel)
!
@
#
✔ Installation place and handling
✔
✔
✔
✔
✔ Checking and Replacement of Antenna
• When you place this player near other devices,
• Antenna is subject to change in its direction or
they may affect poorly together.
damage by wind and rain. For clean screen,
• When you place DVD-Video player and TV in
contact and consult your nearest service center
the upper and lower sides, it may cause
about checking and replacement.
flickering of pictures or failure (tape is not
✔ In recording important screen
ejected).
• Be sure to record the screen and check whether
• When you place this player near strong
recording is performed properly. We beg you
magnetic materials, it may affect image or voice
to understand compensation of recording if
poorly or damage recording.
recording is not performed by badness of used
• Do not spill volatile liquids like insect spray
tape or video.
over the player. Do not leave rubber or plastic
products in contact with the player for a long
✔ Copyright
time. They will cause deterioration or paint
• Do not use your recordings without permission
peel-off.
of a copyrighter except personal usage.
Not in use
✔ Tape and Disc Handling
• When the unit is not in use, be sure to remove
• Do not use any tape and disc below. Damage
the disc or tape and turn off the power.
of video head or cut/coiling of tape may cause
• If you do not use the unit for a long period,
failure.
remove batteries in remote control to prevent
Tape
with mold
leakage.
Tape
or disc stained with juice or attachments
• In case you don’t use the unit for a long time,
- Tape having breakage connection
the unit may not function properly in the
- Disassembled tape
future. Turn on and use the player occasionally.
- Disc with severe scratch
• Moisture condensation may occur in tape.
Moving
Moisture condensation damages the tape.
• Repack the unit as it was originally packed at
Please use the tape after the moisture
the factory. Alternatively, pack this product
condensation is disappeared.
with towel not to be damaged.
• After use, store tape vertically in a case to
• Eject any videotape.
prevent loose.
Cleaning
• Do not store the following places.
• Dust off dirt in cabinet or control panel part
- High temperature and humidity
smoothly with a soft cloth.
- Subject generation of mold
• For heavy dirt, soak the cloth in a weak
- Subject to direct sunlight
detergent solution, wring it well and wipe. Use
- Much dirt or dust
a dry cloth to wipe it out.
- Near strong magnetic materials such as speaker
• Follow instructions in using chemical cleaners.
• Do not use any type of solvent such as gasoline ✔ Video head cleaning
• Video head cleaning is needed when the
or benzene, as they may cause deterioration or
playback picture becomes unclear. Use an
paint peel-off.
equivalent high quality chemical non-abreasive
Checking
head cleaning tape or have them cleaned
• Video is a high precision device. To obtain a
professionally.
clear screen, we recommend regular inspection
6
Downloaded From Disc-Player.com Daewoo Manuals
STANDBY/ON
VIDEO
L AUDIO R
EJECT
REC
SELECT
STOP
AV INPUT
$ %
^ & *
(
! POWER (STANDBY/ON) button
Use to power the device on/off if AC power supply
is connected.
@ Place to insert videotape
# Disc tray
$ VIDEO INPUT jack
% AUDIO INPUT jack
^ EJECT button
& RECORD button
* PR -/+ (Programme Down/Up) button
( Operation Display Window
Display operation of device. For more information,
see “Operation Display Window” as next page.
) SELECT button
Use to change DVD mode to VCR mode, and vice
versa.
REW PLAY/PAUSE FF
OPEN/CLOSE
) 1 234 5
1 STOP button
Use to stop playing.
2 REWIND button
Use to rewind currently being played videotape or
disc; or to playback back rapidly.
3 Playback/PAUSE button
Playback videotape or disc.
Press this button to pause a screen.
4 FAST FORWARD button
Use to wind currently being played videotape or
disc; or to playback rapidly.
5 OPEN/CLOSE Tray button
7
Identification of Controls
Main body (Rear Panel)
Operation Display Window
!
@
#
^ &
DVD
- RECORDING MODE -
- REPEAT MODE -
OUT
Repeat one chapter
Repeat track [VCD]
Timer Recording Error
Repeat title [DVD]
Repeat ALL [VCD]
Recording in Progress
Repeat a defined period
from A [DVD, VCD]
Timer Recording in
Progress
Repeat a defined period
from A to B [DVD, VCD]
- VCR OPERATION -
DVD playback
VCR playback
Fast playback
Fast forward
Fast reverse playback
Rewinding
Slow playback
Fast playback (CUE)
Pause picture
Fast reverse playback
(REVIEW)
Pb
DIGITAL
AUDIO OUT
VIDEO
ANT. OUT
%
(
% DIGITAL OUTPUT (OPTICAL) Jack
# COMPONENT OUTPUT Jack
To enjoy sound quality of theater level in home,
connect this jack with amp or unit embedded
with digital audio decoder.
^ A/V OUTPUT Jack
$ DIGITAL OUTPUT (COAXIAL) Jack
& A/V INPUT Jack
Connect to outlet in a wall.
@ AUDIO OUTPUT Jack
Recording Pause
L
COAXIAL
$
! POWER CORD
It is a jack for supplying power to the unit.
AUDIO
OPTICAL
L
DIGITAL
AUDIO OUT
ANT.IN
IN
R
Pr
[DVD]
*
DVD & VCR
AUDIO OUT COMPONENT OUT
Y
R
Timer Recording Standby
- DVD OPERATION -
Product information
Identification of Controls
To enjoy sound quality of theater level in home,
connect this jack with amp or unit embedded
with digital audio decoder.
* Connection to ANTENNA Cable
( Connection to TV
Slow playback
Still picture
Stop
Child Lock
8
Downloaded From Disc-Player.com Daewoo Manuals
9
Remote Control
!
[DVD] OPEN/CLOSE button, [VCR] EJECT button
@ VCR SELECT button
#
Accessories
Remote control
2 Batteries
Instruction
Manual
RF cable
9
0
“
!
@
• To purchase accessories or not supplied parts additionally, contact your nearest dealer or service center. But,
instruction manual is not sold additionally.
• Operate remote control within 7m from the unit.
• Do not press 2(two) buttons at the same time.
• Do not light up sending and receiving part of remote control.
• Do not keep in the place with much dust and humidity.
✔
Remote control battery installation
STANDBY/ON
VIDEO
L AUDIO R
REC
SELECT
STOP
REW PLAY/PAUSE FF
OPEN/CLOSE
AAA
AAA
AV INPUT
EJECT
#
#
$
‘
%
+
=
^
&
*
(
Instructions in using REMOTE
Two “AAA”
batteries
(supplied).
Detach the battery cover on the rear of the
remote control, and insert two AAA
batteries with the + and - ends aligned
correctly.
[DVD, VCR] NUMBER button, [VCR] TRACKING -/+ button
$ SYSTEM button [VCR] `This button is not available for this
set [DVD] Activates Progressive Scan button
)
1
2
3
4
5
6
7
8
% SETUP button
^
[DVD, VCR] MOVE/SELECT in OSD, [VCR] Channel
&
[DVD] TITLE /PBC button
*
[DVD] AUDIO LANGUAGE Select, [VCR] AUDIO Select
button
(
[DVD] SUBTITLE Select button
Up/Down button
) REVERSE SEARCH button
1 PLAY/PAUSE button
2
[DVD] PREVIOUS button (move into a previous chapter
or track)
3
[VCR] Record SPEED button
Q
q
W
4
[VCR] Record button
5
[VCR] TV/VCR button
6
[DVD] 3D button
w
E
e
R
r
T
t
Y
y
7
[VCR] CM SKIP
8
[VCR] Replay button
9 POWER button
0 DVD SELECT button
“
[VCR] INPUT Selection button
‘ CLEAR button
+
[DVD, VCR] OSD DISPLAY button
= OK/ENTER button
Child Lock !
Q
[DVD] MENU button
q
[DVD] Chapter/Title/Time SEARCH button
W
[DVD] ZOOM button
w FORWARD SEARCH button
E STOP button
Press the power [ ] button of the remote for about
5 seconds. No buttons of front panel can be operated
now and Lock indicator (“
”) will be
displayed on window display. To release child lock,
press any button of the remote control.
e
[DVD] NEXT button (Move into a next chapter or track) ,
[VCR] Frame Advance button in pause mode
R
[DVD] REPEAT Playback button
r
[DVD] REPEAT a defined period from A to B button
T
[DVD] ANGLE button
POWER ON
t
[DVD] MARK button
Player will be POWER ON if any button of the
remote control is pressed.
Y
[DVD, VCR] PROGRAM button
y
[VCR] LAST CHANNEL button (Return to the previous
TV channel which was being watched.)
10
Downloaded From Disc-Player.com Daewoo Manuals
11
Product information
Identification of Controls
Connecting up your player with RF lead
■ Before you start, unplug all the equipment from the mains supply.
■ Before you start, unplug all the equipment from the mains supply.
(Option 1) - How to connect with RF lead
(Option 2) - How to Connect with Audio/Video jack
Installation
REAR PANEL OF DVD-VIDEO
REAR PANEL OF TV
INPUT 1 INPUT 2
REAR PANEL OF DVD-VIDEO
OUTSIDE ANTENNA OR
WALL ANTENNA OUTLET
REAR PANEL OF TV
INPUT 1 INPUT 2
ANT IN
Aerial
The type of aerial you should use,
depends on local interference and
how far you are from the
transmitter. You should contact a
local retailer if you have any
questions about your aerial.
ANT IN
RF CABLE
AUDIO/VIDEO CABLE
¡
™
£
Remove circular cable (RF cable) (surplus cable) plugged in “ANT.IN” jack in rear panel of TV.
Connect the cable to “ANT” jack in rear panel of DVD-Video.
Connect TV to DVD-Video. Connect “TV” jack in DVD-Video with “ANT.IN” jack in TV with RF
cable.
In option (1) you need to tune your television to the player so you can see the picture from the player. When
it is on the player generates a signal on UHF transmission channel 52, but this might change after tuning in
the stations with 'AUTO-SEARCH' . See the 'Check it out' box on page 18. See your television manual for
how to tune in a new channel.
12
Downloaded From Disc-Player.com Daewoo Manuals
(If there is AUDIO/VIDEO INPUT jack in TV)
Connect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OUT jack in
DVD-Video to AUDIO IN jack in TV with connecting cable of Audio/Video jack.
Select VCR mode by pressing TV/INPUT button in TV, you can view more clear screen and sound
than connection with RF cable only.
• VHF: 2 ~13 channels of TV
• UHF: 14~69 channels of TV
• CATV: Broadcasting is transmitted with cable from broadcasting station by contract with the station
and consumers. It does not need any antenna.
• In/Out jack in Audio/Video terminal:
- In : A jack used to receive signal required in this unit from other units.
- Out : A jack used to send signal of this unit to other units.
• Connect with Audio/Video terminal, you can enjoy more clear video and audio.
(Use INPUT button in this REMOTE to select video mode.)
13
Connecting with Other VCR or Camcorder
How to Connect with Jack in Front Panel
REAR PANEL OF PLAYBACK VCR(CAMCORDER)
¡
FRONT PANEL OF DVD-VIDEO
VIDEO
OUT
™
£
(L) AUDIO (R)
VIDEO
L AUDIO R
EJECT
REC
AV INPUT
Connect AUDIO/VIDEO OUT jack in Camcorder(or playback video) to AUDIO/VIDEO IN jack
in rear panel (or front panel) of DVD-Video with connecting cable.
Installation
STANDBY/ON
Connect “ANT. IN” jack in TV to “TV” jack in DVD-Video with RF cable.
To record contents of camcorder or playback video with DVD-Video, insert recording tape attached
recording tab in DVD-Video.
How to Copy(Edit) Tape with Other VCR or Camcorder
REAR PANEL OF DVD-VIDEO
REAR PANEL OF TV
¡
™
INPUT 1 INPUT 2
ANT IN
£
¢
∞
RF CABLE
How to Connect with Jack in Rear Panel
REAR PANEL OF DVD-VIDEO
Turn on DVD-Video.
Press [INPUT] button of remote control and adjust DVD-Video to display “AV” or “AV.F” in TV
screen.
Press [PLAY] button in Camcorder or playback video.
Press [REC] button in DVD-Video if you want to record contents of camcorder or playback video.
Press [Pause] button in DVD-Video when unnecessary or undesired scene is displayed in
recording.
(Caution) Recording is released automatically after 5 minutes since pressing [PAUSE] button.
Press [REC] button if you want to record again.
REAR PANEL OF TV
How to Playback Chapter Photographed by Camcorder
INPUT 1 INPUT 2
VIDEO
(L) AUDIO (R)
OUT
ANT IN
¡
™
£
Turn DVD-Video on.
Press [INPUT] button of remote control and adjust DVD-Video to display “AV” or “AV.F” in TV
screen.
Insert tape in camcorder and playback it.
RF CABLE
14
Downloaded From Disc-Player.com Daewoo Manuals
15
Connecting with Audio
Connecting to a television with Component
jack and a Dolby Digital Amp.
How to Connect with Stereo Unit such as Audio
■ Use in COMPONENT In jack attached in TV or amp supporting Dolby Digital.
REAR PANEL OF DVD-VIDEO
Installation
REAR PANEL OF STEREO UNIT
How to Connect
(L) AUDIO (R)
DIGITAL AUDIO OUT
REAR PANEL OF DVD-VIDEO
CONNECTING CABLE
¡
™
£
(NOT SUPPLIED)
Connect Audio jack. Connect AUDIO OUT in rear panel of DVD-Video to IN jack of stereo sound
unit.
For Input Select in stereo unit, Select “External Input” connected with DVD-Video.
Playback DVD disc or Hi-Fi videotape, you can hear sound in speaker of stereo unit.
(L) AUDIO IN (R)
COMPONENT IN
DOLBY DIGITAL DECODER-AMPLIFIER
TV CONNECTIONS
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theatre Systems, Inc.
16
Downloaded From Disc-Player.com Daewoo Manuals
17
Initial Installation
■ Switch the TV on.
■ You can also start "AUTO SEARCH" in the SETUP "PR PRESET" ➝ "AUTO SEARCH".
■ To tune in new stations (manual tuning) and to enter station names see page 27-28.
Setting up the player
5
CHECK IT!
1
2
3
LANGUAGE SET
ENGLISH
PYCCKNZ
ÔESKY
MAGYAR
You should see this picture the first time you switch on the TV
and player.
PR+/-:SELECT
OK:CONFIRM
OK for "AUTO SEARCH!".
"AUTO SEARCH" tunes in all the stations you can receive in your
country.
SETUP:END
Should you wish the stations to have the same numbers as those
used on the TV, follow the instructions in "Sorting programme
locations" on page 28.
IMPORTANT!
PLEASE CHANGE THE TV
CH TO 54.
Else ...
exit the basic installation function and enjoy your player.
7
Should you wish the stations to have the same numbers as those
used on the TV, follow the instructions in "Sorting programme
locations" on page 28.
Else ...
Press the SETUP button to exit the set-up menu and enjoy your
player
MANUAL SET
PR01
PR02
PR03
PR04
PR05
PR06
PR07
P-01
P-02
P-03
P-04
P-05
P-06
P-07
PR+/-:SELECT
OK:CONFIRM
PR08
PR09
PR10
PR11
PR12
PR13
PR14
P-08
P-09
P-10
P-11
----------
SETUP:END
PLEASE WAIT...
If the clock has not been set, the clock setting screen will appear.
CLOCK SET
TIME - - : - -
Please see “Setting time and date” on page 20.
Press the [OK] button to confirm the recommended RF channel.
CH 25
SETUP:END
4
CH 52
CH 54
0-9:SELECT(21-69)
OK:CONFIRM
SETUP:END
• If the signal from the player is coming into the TV through
the RF lead, the picture will disappear when you press OK
at step 7. You will need to re-tune your television to the new
UHF transmission channel.
Press
on the remote control and RF52 will be displayed on
the front of your player.
Select a free channel on your TV and manual tune the channel
until the blue screen as shown in step 2 appears. Refer to the TV
manual for more details.
Select the wanted language with PR+ or PR- button. Press OK to
confirm.
6
The player recommends the optimal RF OUTPUT CH number
automatically.
RF OUTPUT SET
CURRENT
RECOMMENDED
Basic Operation
• If you don't see the menu picture below after you press the menu button it may be because you
don't use a RCA cable and you need to tune the television to the player (see 'Connecting your
player through RF lead' on page 12). Normally a new player outputs a signal via the RF lead on
transmission channel 52. Search for the menu picture with the channel tuning function of your TV
set (see its user manual). Some televisions allow you to key in the transmission channel number in
their tuning set-up menu.
• In case there will be interference problems with other transmission channels when the player
outputs a signal on transmission channel 52, the AUTO SEARCH process usually recommends an
alternative, as in step 4.
• There is a another way of setting RF output channel, if needed please see 'Connections and
Assembling on page 35'. It does not apply to models which do not generate the RF output signal.
If other stations are positioned on near the current RF OUTPUT
CH, the guide message appears automatically.
Up [PR+], down [PR-], OK and 'confirm'
• Notice the on-screen prompts which the video recorder generates to tell you which button to press. In general
the up and down 'navigation' buttons select or highlight something and the OK button confirms it .
• [PR+] and [PR-] are the same buttons as 'up' and 'down'.
• In the DVD section it is usually the left and right buttons which 'select'.
DATE - - / - - /- - - 0-9:SETUP (HOUR)
/➝:CORRECT SETUP:END
➝
18
Downloaded From Disc-Player.com Daewoo Manuals
19
Setting time and date
Output Select
Setting time and date
To Select DVD
■ Press [VCR] button on the remote control to change into VCR Mode and follow the procedure
below.
Press [DVD] button.
1
Call the player’s "SETUP",
choose "VCR SETUP", then "CLOCK SET".
CLOCK SET
TIME - - : - -
If DVD mode is correctly selected, DVD on the operation display
window is lit. Then, REMOTE button works as DVD function. Press the
[DVD] button, then the mode of DVD-Video Player becomes to the
OPERATION mode.
DATE - - / - - /- - - 0-9:SETUP (HOUR)
/➝:CORRECT SETUP:END
To Select VCR
➝
2
Move to the position you want to change and type in the
new values.
Wait a few seconds after typing a one-digit number.
CLOCK SET
TIME 06:05
DATE 08/08/2004(SUN)
Store with [OK] button and exit with [SETUP] button.
0-9:SETUP (HOUR)
/➝:CORRECT
OK:CONFIRM
SETUP:END
Basic Operation
Press [VCR] button.
If VCR mode is correctly selected, DVD on the operation display
window goes out. Then, REMOTE button works as VCR function. Press
the [VCR] button, then it becomes to the VCR OPERATION mode.
➝
To Select Watch Modes or External Input
Press [INPUT] button.
OSD ON & OFF
When you press [INPUT] button, BROADCASTING RECEPTION and EXTERNAL INPUT is selected. But, it
is not operated in PLAY, REC and DVD mode.
OSD (On Screen Display) ON & OFF
This player is set to “OSD (On Screen Display) ON” mode before shipping and you can change it
to OFF mode.
1
SETUP
Call the player’s "SETUP".
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM
2
Choose “VCR SETUP”.
And press the [OK] button.
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
OSD ON/OFF
PR+/-:SELECT
OK:CONFIRM
3
Select “OSD ON/OFF”.
If you want OSD OFF mode, select it and press [OK] button to
confirm.
Then OSD characters are not displayed in the normal picture.
Downloaded From Disc-Player.com Daewoo Manuals
SETUP:END
OSD ON/OFF
ON
OFF
PR+/-:SELECT
OK:CONFIRM
20
SETUP:END
SETUP:END
21
VCR Playback
DVD Playback
1
2
4
5
6
] button to power on.
Press [DVD] button of REMOTE to change into DVD mode.
Press [OPEN/CLOSE] button to open the disc tray.
Place a disc firmly on the disc tray, making its label look upward.
Insert the disc and press [OPEN/CLOSE] button to close the tray.
The disc tray is closed and after checking the disc’s condition, Playback or Stop
function starts to operate.
To playback it, press [PLAY/PAUSE] button.
• In the case of DVD,
DVD menus and titles are displayed on TV screen.
• In the case of S-VCD and VCD2.0
the menus are displayed on TV screen and it is converted into PBC(Playback
Control) mode.
• In the case of CD, VCD1.1 and MP3,
the disc plays.
To stop it, press [
1
2
3
Press [
4
To stop it, press [
5
Press [EJECT] button in the front part or [OPEN/CLOSE] button on remote
] button to power on.
Press [VCR] button of remote control to change into VCR mode.
Insert the desired tape.
If you want to playback it, press [PLAY/PAUSE] button.
When the operational status is flickering or poor, adjust it with [TRACKING
+/-] button.
] button.
For pause, press [PLAY/PAUSE] button in playback mode.
If you press this button once more, it starts playback again.
control to remove the tape.
Various Playback Methods
√√] or [œ
œœ ] button in
■ If you want fast forward (or reverse) playback, press [√
Playback mode. You can watch fast playing (rewinding) screen.
] button.
For pause, press [PLAY/PAUSE] button in playback mode.
If you press this button once more, it starts playback again.
* NOTE: You might see no color noise band when you fast forward (or reverse)
playback the tape which is recorded in LP mode.
■ If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watch
the desired screen in pause status.
Press [OPEN/CLOSE] button to remove the disc.
√√] button in Pause mode. You can
■ If you want slow-motion playback, press [√
watch the desired screen in the slow forward playback.
Various Playback Methods
√√] or [œ
œœ ]button in
■ If you want fast forward (or reverse) playback, press [√
Playback mode. You can watch fast playing (reverse ) screen.
* This reverse playback can be unavailable for certain DVD.
√√] or [œ
œœ ] button in Pause mode.
■ If you want slow (or reverse) playback, press [√
You can watch the desired screen in the slow forward (reverse) playback.
* For the case of Video CD, this reverse slow playback function is unavailable.
The
mark will appear.
■ If you want still picture, press [PAUSE] button in Playback mode. You can watch
the desired screen in Pause status.
22
Downloaded From Disc-Player.com Daewoo Manuals
Basic Operation
3
Press [
If the product, which
has a auto-detector,
detects a contaminated
head(s), it shows the
conditions to notice the
contamination on
screen.
* In case of the notice
on screen, please rub
the heads with a headcleaner followed by
“How to use a headcleaner”.
* NOTE: VCR doesn’t have Slow Reverse Playback function.
■ If you want to watch a series of screens one by one, (FRAME ADVANCE) press
[NEXT √√❚ ] button in Pause mode. Each time you press this button, the picture
advances one frame.
■ If you press [REPLAY] button in playback mode, the player quickly rewinds 15
seconds of the tape and plays it.
■ If you press [CM SKIP] button in playback mode, the player quickly skips 30
seconds of the tape and plays it.
To Adjust Display
This product includes automatic Tracking function and enables users to enjoy clear
picture without an additional operation. Provided that the following problems can be
solved by the manual adjustment, which improves display quality. (During automatic
display adjustment, “Adjusting Display” are displayed on TV screen.)
- If the screen is poor in Playback mode,
- If noises occur in the upper or lower part of screen in slow playback mode,
- If paused picture vibrates up and down.
Use [TRACKING +/-] buttons of remote control to adjust the display suitable for watching.
23
Recording
Recording
To Record With VCR
1
2
4
5
6
7
Insert a recordable tape.
Insert a tape with recording tab.
1
2
3
With [CHANNEL], [NUMBER] and [INPUT] buttons, select the desired
broadcasting channel or external input unit to record.
Select the desired speed (SP or LP) with [SPEED] button.
Press [REC] button.
Then, it starts recording.
Insert the desired DVD disc.
When it is a DVD disc with copy protect function, you can’t copy it.
Insert a recordable tape.
Press [REC] button during playing of DVD.
DVD plays and VCR starts recording.
If you press STOP [ ] button in DVD mode, DVD and VCR will stop at the
same time.
Basic Operation
3
Press [ ] button to power on.
• Press [VCR] button of remote control to change into VCR mode.
To Copy From DVD To Videotape
If you press STOP [ ] button in VCR mode, VCR stops to record and DVD
continues to play.
“This product incorporates copyright protection technology that is protected by
U.S patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Macrovision,
and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or disassembly is prohibited.”
If you want to pause recording, press [PAUSE] button.
After pressing [PAUSE] button, if the pause status continues for five minutes,
the recording is released automatically.
To exit recording, press [STOP] button.
To Enjoy a TV Channel or DVD during recording
1
If you want to playback DVD during recording with video, insert a DVD disc.
Place the desired DVD disc on DVD tray, press [DVD] button to convert OUTPUT
into DVD mode and press [PLAY] button. Then, you can watch DVD.
2
If you want to watch a TV channel during DVD recording with video, press
[VCR] button to convert OUTPUT into VCR mode and press [PR+/-] button.
Then , you can watch a TV channel.
24
Downloaded From Disc-Player.com Daewoo Manuals
25
Recording
Tuning in New Stations
One Touch timer Recording (OTR)
■ The TV and player are switched on.
■ To see the picture from your player, press the input or AV (Audio/Video) button on the TV.
■ When your urgent business happens suddenly in watching TV or you want to record the current TV
program for the desired time, follow the procedures below.
1
2
Tuning
First, follow the steps 1 to 4 in “Recording With VCR”.
Press [REC] button as much as you want. See the “Recording Times Table”
below.
Once
continuous recording until you press STOP button
Twice recording for 30 mins from current time
3 (times) recording for 1 hour
21
22
3
recording for 10 hours
returning to the status of Once Press
1
To complete the set-up of your video recorder when the
auto set has not stored all of the channels or when you wish
to store a new channel.
Call the video’s "SETUP", choose "PR PRESET".
PR PRESET
AUTO SEARCH
MANUAL SET
PR ERASE
PR ALIGN
PR+/-:SELECT
OK:CONFIRM
2
Select "MANUAL SET".
SETUP:END
MANUAL SET
To stop Recording mode, press [STOP] button more than 5 seconds.
P-01
P-02
P-03
P-04
P-05
P-06
P-07
PR08
PR09
PR10
PR11
PR12
PR13
PR14
PR+/-:SELECT
OK:CONFIRM
... and confirm.
4
5
26
Downloaded From Disc-Player.com Daewoo Manuals
Set the station you want:
• the programme location number;
• the proper broadcast system for your location (BG/DK)
• the broadcast system you want (Aerial(CH) or
Cable(CC)),
• You can directly enter the real channel number with the
œ /√
√],
[0 to 9] buttons, or search by pressing [œ
• The fine tuning you can adjust,
• Change or create the station name.
Once you see the station you want, store it.
Tune in further stations (from step 3 onwards) or exit
tuning mode.
SETUP:END
MANUAL SET
PR
STANDARD
RECEPTION
AUTOSEARCH
FINE TUNING
NAME
PR+/-: UP/DOWN
/➝ : SELECT
OK:CONFIRM
04
BG
AERIAL
CH_ _
____
SETUP:END
MANUAL SET
PR
STANDARD
RECEPTION
AUTOSEARCH
FINE TUNING
NAME
PR+/-: UP/DOWN
/➝ : SELECT
OK:CONFIRM
➝
It's simplest to use the same location number on both the
TV and video.
➝
3
Choose any unused location number "----" or "P-xx" ...
P-08
P-09
P-10
P-11
----------
VCR Operation
PR01
PR02
PR03
PR04
PR05
PR06
PR07
03
BG
AERIAL
CH 03
____
SETUP:END
MANUAL SET
PR
03
STANDARD
BG
RECEPTION
AERIAL
AUTOSEARCH CH_ _
FINE TUNING
____
NAME
PR+/-: UP/DOWN
0/1: CHANGE/CREATE
OK:CONFIRM
SETUP:END
27
Tuning in New Stations
Tuning in New Stations
Station names
Sorting programme locations
■ If your player is showing no station name or is showing a station name incorrectly, you can correct
this.
If the location numbers used for programmes stored in your TV and player are different, you can change them on
the player. To do this, move the stations to the right numbers, until they are arranged the way you want.
2
Select NAME position.
Press the [0] button to change the given name.
Or press the [1] button to create the station name.
Either select the name from the stored list or you
create the station name and enter a 4-digit name.
Change the letters with the [PR +/–] buttons,
œ /√
√] buttons.
move to the next letter with the [œ
MANUAL SET
PR
01
STANDARD
BG
RECEPTION
AERIAL
AUTOSEARCH CH01
FINE TUNING
____
NAME
PR+/-: UP/DOWN
0/1: CHANGE/CREATE
OK:CONFIRM
SETUP:END
1
2
Call the player’s "SETUP",
choose "PR PRESET" then "PR ALIGN".
Select the programme to swap.
Confirm by pressing OK button.
Move the station to the desired location number.
Confirm by pressing OK button.
PR01
PR02
PR03
PR04
PR05
PR06
PR07
PR ALIGN
P-01
P-02
P-03
P-04
P-05
P-06
P-07
PR+/-:ALIGN
:PR VIEW
OK:CONFIRM
➝
1
Call this menu (just see the previous page),
if it isn't displayed.
PR08
PR09
PR10
PR11
PR12
PR13
PR14
P-08
P-09
P-10
P-11
----------
SETUP:END
MANUAL SET
PR
01
STANDARD
BG
RECEPTION
AERIAL
AUTOSEARCH CH_ _
FINE TUNING
NAME
O_ _ _
PR+/-: SELECT CHARACTER
/➝ : SELECT POSITION
OK:CONFIRM
SETUP:END
Clearing programme locations
➝
Store and exit.
PR01 P-01
PR02 P-02
PR03 P-03
PR04 P-04
PR05 P-05
PR06 P-06
PR07 P-07
PR+/-:SELECT
OK:CONFIRM
28
Downloaded From Disc-Player.com Daewoo Manuals
PR08
PR09
PR10
PR11
PR12
PR13
PR14
P-08
P-09
P-10
P-11
----------
SETUP:END
2
PR01
PR02
PR03
PR04
PR05
PR06
PR07
Select the station (location number) you want to clear.
œ ] button.
Review the picture by pressing [œ
PR ERASE
P-01
P-02
P-03
P-04
P-05
P-06
P-07
PR+/-:SELECT
:PR VIEW
OK:ERASE
➝
3
Call the player’s "SETUP",
choose "PR PRESET" then "PR ERASE".
PR08
PR09
PR10
PR11
PR12
PR13
PR14
P-08
P-09
P-10
P-11
----------
VCR Operation
MANUAL SET
1
SETUP:END
Clear by pressing OK button.
29
Timer Recording
Timer Recording
■ For timer recordings, clock, date, and stations must be set correctly.
■ Load a cassette with its safety tab in place and with sufficient free space for the recording.
Normal timer recording
Please decide and confirm with OK.
HOW OFTEN DO YOU WANT
TO RECORD THIS PROGRAM?
ONCE
WEEKLY(ONCE A WEEK)
DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)
PR+/-:SELECT
OK:CONFIRM
SETUP:END
1
TIMER PROGRAM (ONCE)
PR
START TIME
END TIME
START DATE
TAPE SPEED
PR+/-:SELECT(AV)
0-9 : SETUP (PR)
/➝ :CORRECT
OK:CONFIRM
01
18:10
20:30
22/08(FRI)
LP
START END DATE
21:20 22:20 16/08
01
-------
18:10
-- : --- : --- : --- : --- : --- : --
2
Select the programming to change or erase, press
OK.
If you want to erase this programming press
button [0].
20:30
-- : --- : --- : --- : --- : --- : --
22/08
-- / --- / --- / --- / --- / --- / --
SETUP:END
TIMER PROGRAM (ONCE)
PR
START TIME
END TIME
START DATE
TAPE SPEED
03
21:20
22:20
16/08(SAT)
SP
0 :ERASE
/➝:CORRECT SETUP:END
If you wish to make changes, move to the position
œ or √] buttons.
you want to change using the [œ
Change the settings using the [PR +/–] buttons.
VCR Operation
➝
3
If you wish to make changes:
œ/√
√]
Move to the position you want to change using the [œ
buttons. Change the setting using the [PR+/- ] or [number]
buttons.
œ or √ ], till you see “OK :
If all setting are ok, press [œ
CONFIRM” in the bottom line.
Confirm.
TIMER PROGRAM (ONCE)
PR
-START TIME
--:-END TIME
--:-START DATE
--/-TAPE SPEED
SP
PR+/-:SELECT(AV)
0-9 :SETUP(PR)
/➝:CORRECT SETUP:END
➝
2
The programme location number;
the time the broadcast starts,
the time the broadcast ends,
the day of the broadcast, if it is not today.
Select LP if you wish to make a very long recording .
TIMER PROGRAM
PR
03
PR+/-:SELECT
OK:CONFIRM
Type in one after the other:
•
•
•
•
•
Call the player’s "SETUP",
choose "TIMER PROGRAM".
➝
1
Press "SETUP", choose "TIMER PROGRAM". Press OK.
Choose a free programme location. Press OK.
You will be asked if you want to record "ONCE", "WEEKLY"
or "DAILY".
Timer Review – changing and erasing
If all settings are correct, press OK to confirm the
changes. Exit the menu with SETUP.
SETUP:END
Switch your player off.
• Wait a few seconds after typing a one-digit-number.
œ/√
√] buttons
• If you have made a mistake, move to the position you want to change using the [œ
and change the setting.
• If programme timings overlap, the machine will give a warning message. If you don’t adjust
the times, the machine will record the first programme completely then continue with the
second one.
• If there is no sufficient free space for the recording on the cassette the video switches
automatically to “LP” for double recording capacity.
• The recorder will eject cassettes which have the safety tab removed.
• The player will be powered on and record the program at the set time.
• In case the player is powered on after setting of timer recording, the player cannot record in
VCR mode but can record in DVD mode.
30
Downloaded From Disc-Player.com Daewoo Manuals
31
More Functions
More Functions
■ The counter counts in real time from the point you load the cassette. This does not have to be its
beginning! The counter does not count unrecorded parts of the tape.
■ If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).
Resetting the counter to zero
Reset the counter.
COUNTER RESET
Clock / counter display
0:00:00
STOP SP
Each time you press [DISPLAY] button,
1x: Time and date+current status ➝ Time and date
2x: Counter+current status ➝ counter
3x: disappear.
PR01 ARD
STEREO ON
AUTO REPEAT
14:00 10/08
E180 00:48
• If didn’t wind tape (PLAY, FF, REW,...), it doesn’t appear the tape remain time.
If you press the [PLAY] button for 5secs during stop or still mode, it goes Auto repeat mode. This player plays
repeatedly the tape from the beginning to end parts.
To release this mode, press the [
Remaining time and cassette length
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM
SETUP:END
TAPE REMAIN
E-180
E-240
E-300
PR+/-:SELECT
OK:CONFIRM
SETUP:END
E-240 01:27
Call the player’s "SETUP",
choose "TAPE CONTROL"
• Remaining time display is
only possible when the
cassette is loaded.
When you want the player to show the time remaining from the current player tape position (to find out if
there is sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting
this function until you reach the correct length.
To search for an index mark
1. Press "SETUP", choose "TAPE CONTROL"
2. Choose INDEX + to search forward, or INDEX - to search backward.
The VCR will locate your index mark and will start playing the tape at
the previously set index mark.
Call the player’s "SETUP", choose
"VCR SETUP", then "LANGUAGE SET".
Select your language.
Confirm.
TAPE CONTROL
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEXPR+/- :SELECT
OK:CONFIRM
SETUP:END
REW SP
GO TO ZERO
0:02:13
32
Downloaded From Disc-Player.com Daewoo Manuals
PR+/-:SELECT
OK:CONFIRM
SETUP:END
Child lock
Cassettes
PAL
Accessing counter zero position
The player will wind to the position 0:00:00 and stop.
LANGUAGE SET
ENGLISH
PYCCKNZ
ÔESKY
MAGYAR
Press the [ ] button for about 5 seconds.
No buttons of front panel can be operated now and LOCK INDICATOR (“
”)
will be displayed on window display. Keep your remote control in a safe place.
To release child lock, press any button of the remote control.
Searching for a recorded program via index
When you record a program, the VCR places an index mark at the start of
the recording.
SETUP languages
VCR Operation
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
] button or mode operation button. (PLAY, FF, REW or STOP)
Use only good quality tape cassettes with the VHS logo.
•Keep cassettes away from excessive moisture or dust, magnetic and electrical fields
(loud speakers and computer monitors, for example).
•Always wind the tape to the beginning when you have finished. Store with the full
spool at the bottom and with the cassette in its cover.
You can protect your precious recordings from being wiped by breaking out the safety
tab on the side of the cassette (some cassettes have a slide). Should you wish to re-use
the tape after removing the tab, cover the hole with adhesive tape.
and ...
Dimmer : Your player dims its display when switched to stand-by mode.
Auto power off : Your player switches to stand-by when no tape is played and no station is received for more
than 5 minutes.
33
More Functions
Connections and Copying
■ The player machine records the complete sound signal transmitted by the TV station.
■ On the mono VCR, you will hear the normal mono sound.
■ If you are using a RCA cable, select the AV input on the TV to see the picture from the player.
■ If you are not using a RCA cable, select the button number on the TV reserved for video input to
see the picture from the player.
In addition to the normal mono sound track of VHS video recorders, your player machine is equipped with a
high-quality Hi-Fi sound system.
This means you can enjoy
• films with excellent stereo sound
• films of full-length concerts in high quality stereo
• films with impressive Surround Sound using additional Surround equipment
• films with two dialogue modes (dual, bilingual), usually the original sound track and dubbed sound track
• VHS cassettes with Hi-Fi stereo sound and VHS cassette with normal sound
To the TV via antenna cable (if you are not using a RCA cable)
If you are not using a RCA cable, your player can transmit pictures and sound to the TV via the coax aerial
cable. Just tune the TV to the player's transmitting channel (factory set to UHF CH52). Tune the TV carefully to
ensure the best pictures and sound.
1
What you can listen to
During Playback, the player displays what is recorded on
the cassette (if not, press AUDIO).
• “Hi-Fi” = stereo/bilingual
nothing = monaural sound
STOP SP
PLAY
PR10 EURO
STEREO ON
SP
Hi-Fi
L+R
2
• If the quality of the test picture transmitted to the TV is poor due
to interference caused by a station transmitting on channel 52,
you can tune the player to a different transmitting channel. Find
a free channel between 21 and 69 on your TV.
Call the player’s "SETUP" choose "VCR SETUP" then "RF
OUTPUT SET".
VCR Operation
During Stop, the player displays what the current station is broadcasting. When
you switch to another station or the current station changes the sound mode, your
player displays the programme and sound mode on screen (if not, press AUDIO).
• “STEREO” = stereo
“BIL I / BIL II ”=bilingual
nothing= monaural sound
Once you have carried out the steps in "Connecting up your player
with RF lead" , switch on your TV.
Press the [OK/ENTER] button of the player’s remote control longer
than 5 seconds to call the player´s test picture.
Tune the TV to the test picture using the channel pre-set functions of
your TV as described in its manual.
When you have found the test picture, store it under the button
number on your TV for player input.
Press the [OK/ENTER] button of the player’s remote control again
longer than 5 seconds to release the test picture.
RF OUTPUT SET
CH
SYSTEM
52
BG DK
0-9:SELECT (21-69)
/➝:SELECT (BG/DK)
OK:CONFIRM
SETUP:END
➝
The Hi-Fi system
Type in the free channel.
Store and exit.
Choice of sound output
During a stereo performance (playback-”Hi-Fi”/ broadcast
- “STEREO”):
Hi-Fi stereo ➝ left audio channel only ➝ right channel
only ➝ the normal mono sound track of a Hi-Fi cassette
• During broadcasting a bilingual performance : Main
language (original sound track) ➝ sub-language
(dubbed) ➝ both main language and sub-language.
• For mono performances , there is no choice available.
34
Downloaded From Disc-Player.com Daewoo Manuals
PLAY
SP
Hi-Fi
L+R
HI-Fi
LEFT
• If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TV
may help (refer to the TV manual).
• Without a RCA cable, you will not get stereo sound from a TV capable of stereo sound.
Hi-Fi
RIGHT
Hi-Fi
OFF
STOP SP
PR10 EURO
BIL
I
BIL
II
BIL
I+II
35
Connections and Copying
Playing a desired scene
To skip scenes in a disc
Assembling
Should you wish to assemble your own film, from camcorder footage for example, use the assembly technique
for smooth edit points:
• The symbol is lit in VCR mode and goes out in TV
mode.
To move to next chapter (or track), press [√√❚ NEXT] button.
The current chapter (or track) moves to the next chapter (or track).
Press [❚œœ PREV] button.
The current scene moves to the previous chapter (or track) or first scene of current
chapter (or track).
• This symbol means the cassette is in.
• This symbol means a timer recording is setting.
For the best results, the source cassette from which
you are recording should already be playing back
when you start recording.
Directly moving to a desired title
■ Some movie discs may contain multiple titles. If the disc has a movie title menu recorded on it, the [TITLE/PBC] or
[MENU] button can be used to select the movie title. Details of operation may differ depending on the disc used.
* Selecting a title may not be available on certain DVD discs.
2
Press the [TITLE/PBC] or [MENU] button.
A list of the titles on the disc is displayed.
DVD Operation
1
* For the case of VCD disc, menu screen will
appear only when the disc has PBC function
and PBC ON is activated.
Press the [ENTER] button or [PLAY] button
after pressing the [œ √…†] button to select
the desired title.
For the case of VCD disc, press the [Number]
button.
The selected title now starts playing.
36
Downloaded From Disc-Player.com Daewoo Manuals
37
Playing desired scene
Playing desired scene
Searching DVD with a title number, a chapter number or a time
Repeating a defined period
➝
➝
ALL
➝
OFF
Repeat all
Random
➝
OFF
3
If you want to search with a time, press
[SEARCH] button three times.
Please enter the new time to be searched using the
[NUMBER] buttons.
In completing entering, please press [ENTER]
button.
PLAY starts from the selected position.
current chapter
number
001/023
total chapter
number
01:03:20
➟
•
CHAPTER : Current chapter will play repeatedly.
•
TITLE : Current title will play repeatedly.
•
TRACK : Current track will play repeatedly.
•
ALL : Current disc will play repeatedly.
• Repeat one : Current file will play repeatedly.
• Repeat all : All files on the disc will play repeatedly.
• Random : Tracks on the disc will play in random order.
•
OFF : Repeat playback will be cancelled.
If you want to search with a chapter number,
press [SEARCH] button twice.
It shows current and total chapter numbers.
Please enter the new chapter number to be searched
using the [NUMBER] buttons.
➟
2
➝
➝
OFF
total title
number
➟
TRACK
Repeat one
➝
➝
TITLE
➝
CHAPTER
- CD/MP3 -
current title
number
001/003
➝
- VCD -
If you want to search with a title number, press
[SEARCH] button one time.
It shows current and total title numbers. Please enter
the new title number to be searched using the
[NUMBER] buttons.
➟
- DVD -
1
➟
Each time you press [REPEAT] button in playback mode, repeat playback starts as below.
current time
* For the case of VCD disc, repeat playback starts only in PBC OFF mode.
DVD Operation
Repeating a defined period from A to B
■ You may repeat a defined period from A to B.
A MP3 disc may
not be repeated
from A to B.
1
2
3
At the point where you want to start the repeat
playback, press [A-B] button.
The right figure appears and repeat playback start
position (A) is set.
At the point where you want to end the repeat
playback, press [A-B] button again.
A-
A-B
The repeat playback end position (B) is set and a
defined period from A to B is playback repeatedly.
To exit from repeat playback mode, press [A-B]
button.
It enters into Normal Playback mode.
38
Downloaded From Disc-Player.com Daewoo Manuals
OFF
39
Playing desired scene
Confirming the current PLAY mode on screen
Searching VCD with a track or track time
current track
number
001/013
➟
In case of PBC OFF, the screen like the right figure
appears. It shows current and total track
numbers. Please enter the new track number to
be searched using the [NUMBER] button.
Confirming the current DVD disc mode
➟
1
If you want to search with a track number, press
[SEARCH] button one time.
total track
number
While in playing, press [DISPLAY] button.
It shows the current disc mode.
If you want to change the mode, select the item with up/down (…†) cursor and enter
the new settings with [number], [œ] or [√] button. In completing entering, press
[ENTER] button.
To exit from Display mode, press [DISPLAY] button again.
* If it is PBC ON, pressing track number converts PBC
to OFF mode automatically.
If you want to search with a track time, press
[SEARCH] button twice.
In case of PBC OFF, the screen like the right figure
appears.
It shows total track time.
Please enter the new time to be searched using the
[NUMBER] button.
01:03:20
➟
2
current time
001/003
001/023
00:01:03
ENG 01/01
ENG 01/03
OFF
01/01
0-9
3
➟
➟
➟
➟
➟
➟
➟
current title / total title
current chapter / total chapter
time elapsed
subtitle selected / current subtitle / total subtitle
audio language selected / current / total audio language
repeat playback mode
current angle / total angle
ENTER
In completing entering, please press [ENTER].
PLAY starts from the selected position.
DVD Operation
Storing markers in memory to be viewed (listened to) again
■ Storing a MARKER in the DVD memory is similar to marking your page in a book. It allows you to
quickly return to any point on the disc.
1
Storing a marker in the memory.
2
Recalling/Clearing a marker
1--------
Press [MARK] during play and press [ENTER] at
the starting point to be viewed (listened to) again.
Press [MARK] during playback. Press [œ √] to select the marker to be
recalled/cleared.
Press [PLAY] to recall a marker. Or press [CLEAR] to clear a marker.
Play resumes from the point corresponding to the selected marker, or the
selected marker is cleared.
40
Downloaded From Disc-Player.com Daewoo Manuals
41
Confirming the current PLAY mode on screen
Confirming the current VCD disc mode
While in playing, press [DISPLAY] button.
It shows the current disc mode.
If you want to change the mode, select the item with up/down (…†) cursor and enter
the new settings with [number], [œ] or [√] button. In completing entering, press
[ENTER] button.
To exit from Display mode, press [DISPLAY] button again.
001/003
00:01:03
OFF
ON
0-9
➟
➟
➟
➟
current track / total track number
time elapsed
repeat playback mode
PBC mode
Selecting an AUDIO language,
SUBTITLE language and 3D AUDIO
Selecting an audio language
■ The user may select an audio language and subtitle language if a disc includes Multi-language.
A certain disc
may not support audio
select or subtitle select.
Keep pressing [AUDIO] button till the user’s preferred language appears in
playback mode.
If DVD disc includes audio information, every time the user presses [AUDIO] button,
English (ENG), French (FRE), Spanish (SPA) and others appear one by one.
ENG 01/03
ENTER
Selecting a subtitle language
Keep pressing [SUBTITLE] button till the user’s preferred language appears in
playback mode.
Confirming the current CD, MP3, JPG, MPG disc mode
If a DVD disc includes subtitle information, every time the user presses [SUBTITLE]
button, English (ENG), French (FRE), Spanish (SPA), ... and OFF appear one by one.
It shows the current disc mode.
If you want to change the mode, select the item with up/down (…†) cursor and enter
the new settings with [number], [œ] or [√] button. In completing entering, press
[ENTER] button.
➟
JPG file select
➟
MPG file select
MUSIC
■ 000/000 0:00:00 / 0:00:00
LIST
PROGRAM
➟ disc mode / current playback file name
➟ current track / total track number,
time elapsed / total time, repeat playback mode
max 6
SKY
winamp
____
___
_____
___
_____
➟
\
DVD Operation
MUSIC file select
ENG 01/01
Selecting 3D Audio
■ You can enjoy a virtual 3D sound effect from 2-channel sources.
Press [3D].
➟ current cursor file name
Every time you press [3D], the 3D sound toggles
between 3D ON › 3D OFF.
ON
OFF
* For more information, refer to 45-48p.
42
Downloaded From Disc-Player.com Daewoo Manuals
43
Selecting ZOOM and Multi Angle
About MP3, CDDA, JPG and MPG discs
Using a zoom function
Playing a disc containing MP3 or CDDA files
■ The user can enlarge the current screen about 2 or 4 times.
• During zoom mode,
subtitle language
can’t be seen.
This unit will play MP3 or CDDA files recorded on CD-R and CD-RW discs.
Keep pressing [ZOOM] button till the preferred zoom appears.
Every time the user presses [ZOOM] button, a zoom magnification changes 2 times (X2)
➝ 4 times (X4) ➝ OFF ➝ 2 times (X2) ➝ ... one by one.
A base point to be enlarged is centre and the point can be changed with the operation of
[œ √…†] button.
1
Turn on your television and select the channel assigned to this DVD player.
Press the DVD open [OPEN/CLOSE] button, the disc tray opens.
Put a MP3 or CDDA disc on the disc tray with the label side up.
Press the DVD open [OPEN/CLOSE] button, the disc tray closes.
The unit will take a short while to load the disc and display the directory structure.
x2
x4
2
The below figure appears.
MUSIC
■ 000/000 0:00:00 / 0:00:00
LIST
max 6
SKY
winamp
____
___
_____
___
_____
PROGRAM
\
Different Angle
■ If a disc includes multi angle information, the user can watch a screen in multi angles. The function is limited
to a DVD disc supporting multi angle information.
Select the folder.
Move the cursor to desired folder by
pressing [œ √…†] button and press
[ENTER] button to confirm.
MUSIC
■ 000/000 0:00:00 / 0:00:00
LIST
max 6
SKY
winamp
____
___
_____
___
_____
01/01
PROGRAM
DVD Operation
Keep pressing [ANGLE] button till the preferred
angle appears.
Every time the user presses [ANGLE] button, an angle
degrees changes in a consecutive order.
3
\
4
Select the file to listen to (or view).
Move the cursor to desired file which you
want to listen to (or view) by pressing [œ
√…†] button
Press [PLAY] or [ENTER] to start playback.
The selected file will play.
Press [■ ] to stop playback.
MUSIC > MP3
√ 001/018 0:00:34 / 0:03:59
LIST
__
mp3
mp3
mp3
mp3
mp3
mp3
mp3
PROGRAM
1. 01(musicfamily.i
2. 02(musicfamily.i
3. 03(musicfamily.i
4. 04(musicfamily.i
5. 05(musicfamily.i
6. 06(musicfamily.i
7. 07(musicfamily.i
\max 6\01(musicfamily.i.am) Smooth-
* Only MP3 or CDDA file is listed.
44
Downloaded From Disc-Player.com Daewoo Manuals
45
About MP3, JPG and MPG discs
5
6
Repeat playback mode.
Every time you press [REPEAT], repeat
playback mode changes as follows: Repeat
one ➝ Repeat all ➝ Random ➝ OFF ➝ ...
Or select
by pressing [√ †] and press
[ENTER].
The selected file or folder will be playback
repeatedly.
You can program playback.
Select the file to program. Then press
[PROGRAM].
The selected file will go into PROGRAM
folder.
Press [PLAY] or [ENTER] in PROGRAM
folder.
If you want to delete all the files in the
PROGRAM folder, select
by pressing [√
†] and press [ENTER].
If you want to delete one file, press
[CLEAR] button.
About MP3, JPG and MPG discs
Playing a disc containing JPG (PHOTO) files
MUSIC > MP3
√ 001/018 0:00:34 / 0:03:59
LIST
__
mp3
mp3
mp3
mp3
mp3
mp3
mp3
Repeat one
This unit will play JPG files recorded on CD-R and CD-RW discs.
PROGRAM
1. 01(musicfamily.i
2. 02(musicfamily.i
3. 03(musicfamily.i
4. 04(musicfamily.i
5. 05(musicfamily.i
6. 06(musicfamily.i
7. 07(musicfamily.i
1
\max 6\01(musicfamily.i.am) Smooth-
Select the desired folder.
Move the cursor to the desired
folder by pressing […†] and
press [ENTER] to confirm.
PICTURE > JPG
■ 000/000 0:00:00 / 0:00:00
LIST
PREVIEW
DESKTOP
PHOTO
TEMPORAR
TRASH
\
MUSIC > MP3
√ 001/018 0:00:34 / 0:03:59
LIST
__
mp3
mp3
mp3
mp3
mp3
mp3
mp3
1. 01(musicfamily.i
2. 02(musicfamily.i
3. 03(musicfamily.i
4. 04(musicfamily.i
5. 05(musicfamily.i
6. 06(musicfamily.i
7. 07(musicfamily.i
REPEAT FILE
PROGRAM
mp3 6. 06(musicfamily.i
mp3 2. 02(musicfamily.i
mp3 5. 05(musicfamily.i
2
\max 6\02(musicfamily.i.am) Lager T
3
PREVIEW
1. BAK001
2. BAK002
3. BAK003
4. BAK004
5. BAK005
6. BAK006
7. BAK007
jpg
jpg
jpg
jpg
jpg
jpg
jpg
• The maximum depth level of directories should not exceed 4.
• In case that the file is recorded with the variable bit rate (VBR) in one file (Example: 54-256kbps) the
sound breaking may occur during the playback.
Start the slideshow of file.
If you press [PLAY] or [ENTER]
when a JPG image is selected, a
slideshow will begin automatically
starting from the selected image.
• To stop the slideshow, press
[STOP].
To turn left, press [œ ].
To turn right, press [√].
■■■■■
12/134 œ 90°
√ 90°
DVD Operation
• The maximum number of directories should not exceed 32.
■œœ √√■ √/ ■ ■ ■ DISPLAY
To skip to next screen (or file), press [√√❚].
To skip to previous screen (or file), press [❚œœ ].
• File names should be named using 8 or fewer letters and/or numbers, and must incorporate the
“MP3” file extension. EXAMPLE: ********. MP3 where each * is a letter or number.
• The CD-R must be recorded with the standard format because it can not be played back according to
the recording format.
LIST
__
\PHOTO\320\BAK001.JPG
• The Bit Rate must be within 64-256 kbps.
Caution
• Try to avoid the use the CD-RW(Rewritable) disc if possible because it can not be played back
according to the recording format.
PICTURE > JPG
■ 000/000 0:00:00 / 0:00:00
* Only JPG file is listed.
The ability of this unit to read MP3 discs is dependent on the followings:
• Use only letters and/ or numbers in file names. If you use special characters, the file and/ or folder
names may not be displayed correctly on the on-screen display.
Slideshow Delay Time set.
Select “
Slideshow &Delay
Time” function. Then press
[ENTER] to adjust the slideshow
delay time from 0FF to 10 seconds.
4
Combination Play set.
Select “ Combination Play”
function.
Then press [ENTER] or [PLAY]
to enter into the playback of total
files.
A combination play will begin.
PICTURE > JPG
■ 000/000 0:00:00 / 0:00:00
LIST
__
jpg
jpg
jpg
jpg
jpg
jpg
jpg
PREVIEW
1. BAK001
2. BAK002
3. BAK003
4. BAK004
5. BAK005
6. BAK006
7. BAK007
\PHOTO\320\BAK001.JPG
• The CD-R should be written using the ‘disc at once’ method.
• The disc which is made with ISO 9660 format can be played back.
46
Downloaded From Disc-Player.com Daewoo Manuals
47
About MP3, JPG and MPG discs
Displaying menus in a disc
Playing a disc containing MPG (MOVIE) files
To display menus in a disc
This unit will play MPG files recorded on CD-R and CD-RW discs.
■ If a disc includes menus, the user may use them.
1
Select the desired folder.
Move the cursor to the desired
folder by pressing […†] and
press [ENTER] to confirm.
MOVIE
■ 0/00 0:00:00 / 0:00:00
LIST
1
PREVIEW
DESKTOP
MOVIE
TEMPORAR
TRASH
Press [MENU] button.
• In case of a DVD disc, it shows menus in the disc. Also they are different
according to discs.
• If it is a VCD2.0, select PBC ON mode by pressing [TITLE/PBC] button.
* CD and VCD1.1 do not support the function.
\
2
Select the desired MPG file.
Move the cursor to the desired
MPG file. Then press [ENTER] or
[PLAY] button to playback.
* Only MPG file is listed.
2
MOVIE
■ 0/00 0:00:00 / 0:00:00
LIST
__
mpg
mpg
mpg
mpg
mpg
mpg
mpg
PREVIEW
1. BAK001
2. BAK002
3. BAK003
4. BAK004
5. BAK005
6. BAK006
7. BAK007
Progressive Scan Mode
\MOVIE\320\BAK001.MPG
Start the playback of MPG file.
If you press [ENTER] or [PLAY]
button, selected MPG file starts
playback.
■■■■■
Selecting SCAN MODE
DVD Operation
3
If it is a DVD disc, move a cursor to a relative item with arrow buttons of [œ
√…†] button and select one with [ENTER] button or [PLAY] button.
While in DISC STOP mode, press the [SYSTEM] button .
If you press [DISPLAY] button, it
shows the current disc mode.
001/003
00:01:03
OFF
0-9
➟ current track / total track number
➟ time elapsed
➟ repeat playback mode
Each time you press [SYSTEM] button, the SCAN MODE changes as follows:
INTERLACED › PROGRESSIVE › INTERLACED › PROGRESSIVE.
* If SCAN MODE is set to “INTERLACED”, connect Y/Pb/Pr on the
DVD+VCR to the INTERLACED input on your TV.
If SCAN MODE is set to “PROGRESSIVE”, connect Y/Pb/Pr on the
DVD+VCR to the PROGRESSIVE SCAN input on your TV.
ENTER
• To stop the playback, press [STOP].
• To skip to next movie (or file), press [√√❚ ].
• To skip to previous movie (or file), press [❚œœ].
• To view fast forward playback, press [√√].
• To view fast reverse playback, press [œœ].
48
Downloaded From Disc-Player.com Daewoo Manuals
49
Language Setup
Language Setup
■ A user can set OSD language, Audio, Subtitle and Disc Menu.
“OSD” means
“On Screen Display”.
1
While STOP or RESUME STOP, press [SETUP]
button.
OSD
AUDIO
SUBTITLE
DISC MENU
ENGLISH
AUTO
OFF
AUTO
OSD
AUDIO
SUBTITLE
DISC MENU
ENGLISH
✓
RUSSIAN
CZECH
HUNGARIAN
OSD
AUDIO
SUBTITLE
DISC MENU
SPANISH
GERMAN
ITALIAN
DUTCH
RUSSIAN
CZECH
HUNGARIAN
AUTO
✓
5
Selecting Disc Menu language.
Set your preferred DISC MENU language with
[ENTER]. If the DISC MENU language is set and
recorded on the DISC, it is automatically played
in the set language every time it is played.
OTHERS - - - - : Another language can be
selected. You can input 4-digit language code.
2
3
In case a disc
does not include
setting languages
information, the
selected language does
not appear.
Selecting a OSD language.
Select a OSD language to be displayed on DVD
menus with [ENTER].
Selecting Audio language.
Set your preferred audio language with
[ENTER]. If the audio language is set and
recorded on the DISC, it is automatically played
in the set language every time it is played.
OTHERS - - - - : Another language can be
selected. You can input 4-digit language code.
Refer to the language codes on next page. Press [CLEAR] if an
incorrect language code is entered.
4
Selecting Subtitle language.
Set your preferred subtitle with [ENTER]. If the
subtitle language is set and recorded on the
DISC, it is automatically played in the set
language every time it is played.
GERMAN
ITALIAN
DUTCH
RUSSIAN
CZECH
HUNGARIAN
AUTO
✓
OTHERS - - - -
OSD
AUDIO
SUBTITLE
DISC MENU
SPANISH
GERMAN
ITALIAN
DUTCH
RUSSIAN
CZECH
HUNGARIAN
OFF
✓
OSD
AUDIO
SUBTITLE
DISC MENU
GERMAN
ITALIAN
DUTCH
RUSSIAN
CZECH
HUNGARIAN
OFF
✓
OTHERS - - - -
OTHERS - - - - : Another language can be
selected. You can input 4-digit language code.
Refer to the language codes on next page. Press [CLEAR]
if an incorrect language code is entered.
50
Downloaded From Disc-Player.com Daewoo Manuals
SPANISH
GERMAN
ITALIAN
DUTCH
RUSSIAN
CZECH
HUNGARIAN
AUTO
✓
OSD
AUDIO
SUBTITLE
DISC MENU
GERMAN
ITALIAN
DUTCH
RUSSIAN
CZECH
HUNGARIAN
AUTO
✓
OTHERS - - - -
Table of language and Their Abbreviations
Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE”
and/or “DISC MENU”.
Code
6565
6566
6570
6577
6582
6583
6588
6590
6665
6669
6671
6672
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
Language
Afar
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bengali;Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Code Language
6983 Spanish
6984 Estonian
6985 Basque
7065 Persian
7073 Finnish
7074 Fiji
7079 Faroese
7082 French
7089 Frisian
7165 Irish
7168 Scots Gaelic
7176 Galician
7178 Guarani
7185 Gujarati
7265 Hausa
7273 Hindi
7282 Croatian
7285 Hungarian
7289 Armenian
7365 Interlingua
7378 Indonesian
7383 Icelandic
7384 Italian
7387 Hebrew
7465 Japanese
Code
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
Language
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Code
7789
7865
7869
7876
7879
7982
8065
8076
8083
8084
8185
8277
8279
8285
8365
8368
8372
8373
8375
8376
8377
8378
8379
8381
8382
Language
Burmese
Nauru
Nepali
Dutch
Norwegian
Oriya
Panjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Romanian
Russian
Sansrit
Sindhi
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Code
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8479
8482
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
Language
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Tonga
Turkish
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Chinese
Zulu
Setup
OSD
AUDIO
SUBTITLE
DISC MENU
Refer to the language codes. Press [CLEAR] if an
incorrect language code is entered.
OSD
AUDIO
SUBTITLE
DISC MENU
51
Video Setup
Audio Setup
■ A user may select audio menu according to a user’s speaker set.
■ A user can set up a connected TV condition and screen.
1
2
While STOP or RESUME STOP, press
[SETUP] button.
Selecting TV Aspect.
Set your preferred TV ASPECT ratio with
[ENTER] button.
TV ASPECT
SCAN MODE
4:3 LB
INTERLACED
TV ASPECT
SCAN MODE
4:3 LB
4:3 PS
16:9 WIDE
1
✓
Selecting SCAN MODE.
You may set SCAN MODE to INTERLACED or
PROGRESSIVE.
DIGITAL OUT
DYNAMIC RANGE
BITSTREAM
OFF
Select a Digital Output.
Set audio output to coaxial or optical. You
can set the outgoing digital signal to
BITSTREAM or LPCM:
DIGITAL OUT
DYNAMIC RANGE
BITSTREAM
LPCM
✓
• BITSTREAM : The raw audio signal
recorded on the disc goes to the digital
audio output.
• LPCM : The decoded audio signal goes
to the digital audio output.
If a user selects “4:3 PS”, the user can watch
only a center of the original scene of “16:9”. If a
user selects “4:3 LB”, the user can watch the
original scene of “16:9”, but the top and bottom
of the screen look black color.
If a disc size is originally recorded in 4:3, a user
cannot watch it in a wide screen though a user
sets a size as “16:9 Wide”.
3
2
While STOP or Resume STOP, press
[SETUP] button.
3
TV ASPECT
SCAN MODE
INTERLACED ✓
PROGRESSIVE
Select a Dynamic Range.
You can set the Dynamic Range as follows:
• Off : You can hear the sound as it was
originally recorded on the disc.
• Full : You can hear loud sounds softer
and soft sounds louder.
DIGITAL OUT
DYNAMIC RANGE
FULL
OFF
✓
* If SCAN MODE is set to “INTERLACED”,
connect Y/Pb/Pr on the DVD+VCR to the
INTERLACED input on your TV.
If SCAN MODE is set to “PROGRESSIVE”,
connect Y/Pb/Pr on the DVD+VCR to the
PROGRESSIVE SCAN input on your TV.
Setup
52
Downloaded From Disc-Player.com Daewoo Manuals
53
Others Setup
Others Setup
1
While STOP or RESUME STOP, press [SETUP]
button.
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
PASSWORD
6
ON
ON
RESET
8 ADULT
Changing a password.
To change your password, move the cursor
to “PASSWORD” and press [√].
Enter a current password.
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
PASSWORD
INPUT PASSWORD
---OK
2
Select character display window.
Select "On" to make OSD (On Screen Display)
language displayed in screen.
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
PASSWORD
ON
OFF
✓
Then enter a new password and press
[ENTER].
Confirm a new password.
3
4
Select screensaver.
If bright scenes continue to be displayed in
screen, TV can be damaged. Set the screensaver
to "On", the screensaver functions automatically
and DVD logo moves continuously if the resume
stop, stop, open status is maintained for about 5
minutes.
Restoring DEFAULTS.
If you press [ENTER] when the cursor
highlights RESET, “Are you sure?” message
will appear. Confirm with [OK].
This feature resets every function to its
original Factory Defaults except the Parental
Control settings.
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
PASSWORD
ON
OFF
✓
Now your password is changed.
OSD
SCREEN SAVER
RESET
DEFAULTS
PARENTAL
Are you sure?
PASSWORD
OK
CANCEL
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
PASSWORD
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
PASSWORD
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
PASSWORD
INPUT PASSWORD
----
CONFIRM PASSWORD
----
CHANGE OK
CANCEL
The initial password is 3308. In case you forget newly-input password, you can use 3308 as a
password.
5
Select Parental.
Press [√] button when the cursor is located in
PARENTAL.
Change Parental Rating level.
Once you have entered the correct
password, you can change the PARENTAL
rating by pressing […†]. And confirm it
with [ENTER].
These 8 levels of parental control, protect
children from watching violence, sexual
scenes and other objectionable material.
54
Downloaded From Disc-Player.com Daewoo Manuals
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
PASSWORD
1 KIDS
2G
3 PG
4 PG-13
5 PG-R
6R
7 NC-17
8 ADULT
✓
1 KIDS
2G
3 PG
4 PG-13
5 PG-R
6R
7 NC-17
8 ADULT
✓
“Parental Lock” activates only if you set a password and the unit goes into Lock status. When the
disc has no parental function even if the disc for adult only, Parental Lock doesn’t activate.
Setup
When “INPUT PASSWORD” appears on the
screen, input the password.
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
PASSWORD
55
About DVD
About DVD
Playable Disc
PBC
This is recorded on a Video CD 2.0, Video CD 3.0 and SVCD. The scenes or information to be viewed (or
listened to) can be selected interactively with the TV monitor by looking at the menu shown on the TV
monitor. It stands for PlayBack Control.
CHAPTER
It means the information recorded in a DVD. A title in a DVD is divided into many tracks, of which a
track is called as a chapter. A certain scene of a screen can be quickly searched with the chapter
number.
TITLE
It means the information recorded in a DVD. A DVD can be divided into may titles.
TRACK
It means the information recorded in a video CD and audio CD. A disc consists of many a track, for
which a user can search a certain position.
dts
Digital Theatre System is a 5.1 -channel surround sound system, which is widely used in movie
theatres around the world. It enables the bit rate to be increased to provide good sound quality. “DTS”
and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
• DVD, Video CD(Version 1.1, 2.0), S-VCD and Audio CD
Disc type
DVD
Playable
Possible
Restriction
Region number 2 or Region number All
Video CD
CD
CD-ROM
Possible
Possible
Possible
Version 1.0/1.1/2.0, SVCD
PCM or dts
MP3 File
CD-R
CD-RW
Possible
Possible
Video-CD/CD/CD-ROM (MP3 File)
Video-CD/CD/CD-ROM (MP3 File)
DVD-R
DVD-RW
Possible
Possible
DVD Video
DVD Video
DVD+RW
DVD-ROM
Possible
Impossible
DVD Video
DVD-RAM
Photo CD
Impossible
Possible
Multi Angle Some DVD discs contain the various scenes that have been simultaneously shot from a number of
different angles.
• You should record the file with standard format.
• Playback of some discs such as CD-R, CD-RW, DVD-R, DVD-RW, or DVD+RW may be impossible according to its
record status.
REGION MANAGEMENT INFORMATION
This unit is designed and manufactured to respond to the Region Management information that is
recorded on a DVD disc. The region number of this player is “2”. If the region number described on the
DVD discs does not correspond to the Region number of this player, the player will not play this disc.
This player will play DVD discs made for “ALL” regions. Therefore, this player will play DVD discs
marked with labels containing the region number “2” or “ALL”.
2
ALL
(Region 2)
(Region ALL)
Terms related with DVD
DVD
Linear PCM is a signal-recording format used in a CD, while CD is recorded in 44.1kHz/16bit, a DVD
is recorded in 48KHz/16bit up to 96KHz/24bit.
PCM
except KODAC CD
A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include 135 minutes of video
information. And for audio, it can hold up to 8 kinds of languages and 32 kinds of subtitle languages. By
using MPEG-2 video compression and digital 3D surround sound, DVD realizes high-defined screen and
quality sound like a movie theater.
A CDDA (abbreviation of Compact disc digital audio) is a music disc that is currently used.
MP3
Audio compression format that enables audio files to be stored and transferred on a computer with a
relatively small file size. It enables you to enjoy CD quality music. (Short for MPEG-1 Layer 3)
56
Downloaded From Disc-Player.com Daewoo Manuals
Bitstream
Digital audio data that is decoded into an analog signal for subsequent output to speakers.
Lt/Rt
It indicates L/R of Dolby Digital 2CH Downmix output.
Downmix
DOWNMIX is reproducing the proper audio when audio format recorded on a disc differs from the
output audio channel configuration. For example, with just one stereo speaker system you can hear
full 5.1 channel audio.
Handling Disc
• To keep a disc clean condition, please do not touch a side containing play
information.
• Do not attach a bit of paper or sticky tape on it.
• Do not expose a disc to a direct sunlight or electric heating systems.
• After using it, please keep a disc in a case.
Cleaning Disc
• Before using it, please rub it from center toward outside with clean clothes.
• Do not use any type of solvent such as thinner, benzol (benzene), commercial cleaning
goods or antistatic sprays.
The others
CDDA
Dolby Digital Dolby Digital enables the delivery of mono through 5.1-channel audio at data rates from 32 kbps to 640
kbps, thus offering flexibility and economical performance as well as uncompromised sound quality.
57
Basic information about VCR and Videotape
Trouble Shooting (VCR)
Terms related with VCR
Symptom
AFT
Automatic fine tuning, a circuit that automatically adjusts TV reception to optimum condition.
CABLE
Cable television.
Index Search A feature of this VCR that automatically records an index each time recording begins. It helps you
locate a particular segment of the tape quickly and easily.
Checks
•
“Power On” does not work.
➤
Please check whether a power plug is inserted in an electric outlet.
•
It does not work even in “Power On”.
➤
➤
Please check whether a videotape is inserted in.
Try to insert a plug again.
•
A videotape is not inputted in.
➤
➤
➤
Please check whether a power plug is inserted in an electric outlet.
Please check whether a videotape is in.
Please check whether a videotape is inserted in a right direction (a
side of transparent window should be on the upside)
Have you inputted a videotape again just after the tape was ejected?
Please try it again after fully ejecting it.
When a videotape forces to be ejected, the tape may not be inputted. In
the case, please pull out an outlet, and then push the tape smoothly.
Long Play, an intermediate tape recording speed that combines most of the picture/audio quality
obtainable at the standard recording speed with some of the tape economy of Extended Play (EP).
OSD
On-screen display of information pertinent to the features of the VCR.
➤
OTR
One-touch recording, a feature that allows you to record the program you’re watching by
pressing the REC key. Each press of the key increases the recording time by 30 minutes, up to 10
hours.
➤
•
Radio frequency, the composite audio/video signal supplied to a TV receiver (or other video
component) by an antenna or cable system.
On inputting a videotape, the tape is
re-ejected.
➤
RF
That’s why a safe mode to protect a videotape is operated
automatically. Please pull out the tape and input it again.
•
A videotape is not ejected.
➤
Safety tab
The plastic tab at the back of a video tape cassette which, when removed, prevents accidental
erasure of a recording.
In case the product is used for a long time, a videotape may not be
ejected for a film inside may be stretched. In the case, please pull out
a power plug for about 10mins and then press “EJECT” button.
•
SP
Standard play, the recording speed to use when the best picture quality is of prime importance
(and when total recording time is not).
A channel on video and a play screen
does not appear.
➤
➤
➤
➤
Please check your antenna’s connection.
TV channel should be fixed on video channel.
Please check your antenna’s signal whether it may be weak. In case of its
weakness, please use a frequency amplifier connected with the device.
Press “TV/VCR” and then let “VCR” is displayed on the display panel.
•
Noise (screen noise) appears on
screen.
➤
➤
➤
While in no use of VCR, was it turned on?
While in recording a program, do you watch another channel?
Select TV by pressing [TV/VCR] button on remote control.
•
Noise appears on screen after
recording.
➤
While in playing a videotape, there may happen some noise or blot
in the part of the beginning of a videotape or resuming “PAUSE”,
which are not breakdown.
•
While in playing, noise appears.
➤
Please press “TRACKING” for better screen. Videotape may be
poor. Try to change it to another one.
•
•
Sound and screen are irregular.
Sound comes out but screen does not
appear.
Screen is irregular and stripes appears.
"Screen Error" message is displayed
in a screen.
➤
Please use a head-cleaner to clean VCR heads. VCR heads may be
contaminated.
•
While recording and playing, the top
of screen extremely waves.
➤
Since VCR Play signals are not stable like a TV signals, screen may
be unstable or curved while in playing. To fix the problem, please
horizontal adjustment.
•
A screen is not clear.
➤
➤
➤
In case videotape is the one recorded by other products or old one,
stripe may appear on the screen.
Try to adjust the screen by [TRACKING+/-] button
Try to use a head-cleaner.
➤
➤
Try to use a head-cleaner.
Try to adjust the screen by [TRACKING+/-] button.
What is dew condensation symptom?
• If a VCR is moved from a cool place to a warm and damp place or a place facing a direct cool wind from airconditioner...and others, temperature varies sharply, which makes dew on head drums of VCR.
If dew condensation occurs,
1
First, turn it on for one or two hours before using it.
2
Do not use it because it may develop troubles of a VCR or videotape.
How to use a head cleaner
• In case of a old or contaminated videotape, screen may not be clean from the contamination of VCR heads.
Please remove contaminants using a head-cleaner like below order.
1 Insert a head-cleaner into VCR
2 Press “PLAY” for 5 seconds, and then press “FF” for about 10 seconds.
PLAY (5secs)
3
FF (10secs)
Eject a head-cleaner from VCR
• If the screen is not clean yet, please repeat the above 2 or 3 times more.
• A head-cleaner is not for sale. Please ask it for the nearest agent.
• In case a user ask the removal of contaminants of us, the user should pay extra charges.
58
Downloaded From Disc-Player.com Daewoo Manuals
•
•
•
A screen at pause is trembling or
slow screen is not clear.
The others
LP
59
Trouble Shooting (VCR)
Trouble Shooting (DVD)
Symptom
•
Recording a TV program is
impossible.
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
•
Once pressing “REC”, a videotape is
ejected automatically.
Symptom
Checks
➤
➤
➤
➤
For recording, you should use videotape with a tab.
Please check whether a channel is fixed on video. If not, you have to
turn it into “TV” by pressing “INPUT” button.
Please check whether the timer recording info is right.
Are RF cables inputted antenna connection terminal correctly?
Does a CH number selected in display section appear?
Please check a tab on a tape whether it is broken or not. (If it was
broken, please scotch-tape it)
Check whether a tape attached with a recording tap is inserted.
Check whether the screen is displayed in VCR Only Channel. Press
[INPUT] button in this remote controller to adjust in "General
Broadcast" condition.
Is the rounded line (RF cable) connected in "ANT.IN" terminal?
Is the selected channel number shown in Display?
Is a tab of cassette tape broken? (Please cover a tab hole with
cellophane adhesive tape (Scotch tape).)
Please check whether the clock is right.
Does the display on your video show “ ” (Ready to timer
recording)? Please make it out.
Please check whether the timer recording info is right.
Please check a tab on a tape whether it is broke or not. (If it was
broken, please scotch-tape it)
•
The recorder does not play.
Checks
➤
➤
➤
•
No sound comes through.
➤
If a DVD is from overseas, it may not be played. Please check a
DVD’s region code whether it has the relative region code 2 or All.
Please check whether a DVD is inserted in a right direction.
If it is a CD-ROM for PC or DVD-ROM, it does not work.
➤
➤
➤
Play mode may be “SLOW” or “PAUSE”(In abnormal speed play,
no sound comes through)
Did you connect the parts in right way?
Please check the operative condition of TV or amplifier.
From SETUP, please check “AUDIO” items.
•
A disc is playing but screen does not
appear or poor screen appears.
➤
➤
➤
➤
➤
Did you turn on your TV sets?
Did you connect the parts in right way?
The play may be in “PAUSE”.
A disc may have some contaminants or be damaged.
A disc may be bad one.
•
Sound is irregular
➤
➤
➤
Please check the connection with Dolby Digital amplifier.
Please check the plugs are connected with one another tightly.
Some contaminants may be remained in connection terminal.
•
REMOTE does not work.
➤
➤
➤
Please check the degree of remote control, distance or any interruption.
Battery may be weak or exhausted.
When you operate DVD, use it by pressing [DVD] button.
•
Dolby Digital sound does not work
➤
➤
➤
Dolby Digital sound can be worked in the Dolby Digital amplifier only.
Please check “Dolby Digital ” mark on your DVD.
In case of playing it through digital output, while pressing “STOP”,
please check whether “Digital Output” is “Bitstream” by pressing
“SETUP”.
Please check the connection is correct.
•
“AUDIO” or “SUBTITLE” button
does not work.
➤
If a DVD does not include language information, it does not support
the function.
•
Timer recording of Cable TV does
not work.
➤
➤
➤
➤
Was a cable data output code connected correctly?
Were a converter manufacturer setup and output channel right?
Did you enter a password? (Please cancel it.)
Did you turn off your player? (Please turn it on.)
•
In spite of pressing “CHANNEL”, a
channel can not be set.
➤
➤
You may not memorize channels.
Please check your channel setting or press a number button.
•
While duplicating, screen is not
clean and distorted.
➤
Some tapes or discs distributed in the market for lending is set to
prevent copy in manufacturing. These tapes cannot be duplicated in
a good condition.
•
“ANGLE” button does not work
while a DVD is playing.
➤
“ANGLE” is supported only in a DVD contains multi angle scenes. Also
a user can confirm the support with the “ANGLE” mark on screen.
•
remote control does not work.
➤
➤
Battery may be weak or exhausted.
A receiver of remote control may be different with a sender.
•
“MENU” does not appear while a
DVD is playing.
•
Buttons on remote control do not
work.
➤
In case a videotape is positioned in the beginning, “VISS REW” and
“REW” do not work.
In case a videotape is positioned in the end, “FF”, “VISS FF”, “PLAY”
and “REC” do not work.
Please check whether another button is pressed.
➤
➤
➤
Please check the degree of remote control, distance or any interruption.
Please check a battery in remote control whether it is exhausted or not.
A DVD may not contain menu information.
• The file name of MP3 (CD-R) appears
with strange letters.
➤
The file name of MP3 recognize only the Alphabet (A~Z, a~z),
numbers (0~9) and a special symbol on keyboard (~, !, @, #, $ ....)
and 10 letters can be displayed in maximum.
The letters except above case will be displayed like “----”.
➤
➤
•
VISS index search does not work.
➤
➤
Cable broadcasting can not be
selected.
➤
➤
•
Any MP3 (CD-R) file isn’t displayed.
➤
If the surface of disk is injured, the file display and playback can be
impossible.
Please select “CABLE” not “NETWORK” from the “CHANNEL
SETTING”.
60
Downloaded From Disc-Player.com Daewoo Manuals
The others
•
Are you playing a tape that is not recorded in this recorder? (Try to
record it with the recorder.)
You may start recording it in “REC-PAUSE”. Please start recording it
from stop condition.
➤
61
Specifications
Power
200-240V~, 50/60Hz
Consumed electricity
22W
Weight
4.6kg
Dimension (W x H x D)
435mmx93mmx255mm(Without Foot), 435mmx98mmx255mm(With Foot)
Operative temperature
+5°C~40°C
Installation condition
Horizontal / Relative humidity under 80%
Laser output
5mW (continuous wave max.)
Wave length
635nm (DVD), 730nm (CD)
Signal type
PAL COLOR
Antenna Input/output
U/V-mixed: 75Ω unbalanced
VIDEO input
1.0Vp-p (unbalanced, RCA JACK)
AUDIO input
-8.8dBm, RCA JACK
VIDEO output (common use of DVD and VCR)
VIDEO output terminal, 1.0 Vp-p unbalanced, RCA JACK
VIDEO output (DVD only)
Component output (75Ω In load Y: 1.0Vp-p, Pb:0.7Vp-p, Pr:0.7Vp-p)
AUDIO output (common use of DVD and VCR)
Audio output terminal (2 kinds): -5.8dBm(VCR), 2Vrms(DVD), RCA JACK
AUDIO output (DVD only)
Analogue AUDIO output : 2.0Vrms
Playable tape
Very high dense tapes with VHS marks
Digital audio output (OPTICAL, COAXIAL)
Playable disc
DVD, VIDEO-CD, CD (12cm), CD (8cm), MP3, CD-R, CD-RW
Tape speed
SP: 23.39mm/s, LP: 11.70mm/s
Playtime
SP: 3hrs, LP: 6hrs (use of E180tape)
Clock display
24 hrs
Time Recording
8 programs a month
Persistence in power failure
1min
VIDEO S/N (VCR)
Over 43dB(Standard recording)
Resolution
VCR
DVD
Over 240 lines (Standard recording)
Over 400 lines (Playback DVD)
AUDIO (VCR)
Over 65dB
AUDIO (DVD)
90dB
AUDIO dynamic range
90dB
DVD Audio output standards
Output
Analogue Audio output
Digital Audio output
Optical digital audio output
DVD
48/96KHz sampling
48KHz sampling
48KHz sampling
Disc type
VIDEO-CD
44.1KHz sampling
44.1KHz sampling
44.1KHz sampling
62
Downloaded From Disc-Player.com Daewoo Manuals
CD
44.1KHz sampling
44.1KHz sampling
44.1KHz sampling
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising