C-more Micro 3in STN Non
C-more Micro-Graphic Panels Selection Guide
C-more Micro-Graphic Panels
Part Number
EA1-S3ML
NonTouch
EA1-S3ML-N
Description
Price
3.1-inch C-more Micro-Graphic Touch Panel with green and red LED backlights. Supports 5
selectable backlight colors (Green, Red, Amber, Yellow and Lime). STN LCD monochrome, 128
x 64 dot display. Has 5 user-defined function keys with LED indicators. Power is supplied to the
panel through the serial communication port connection when used with DirectLOGIC PLCs having an RJ12 communication port. EA-MG-SP1 (power supply with serial option module)
required when connecting to third party PLCs. NEMA 4/4X, IP65 (when mounted correctly; for
indoor use only).
<--->
3.1-inch C-more Micro-Graphic Non-Touch Panel with green and red LED backlights. Supports
5 selectable backlight colors (Green, Red, Amber, Yellow and Lime). STN LCD monochrome, 128
x 64 dot display. Has 5 user-defined function keys with LED indicators. Power is supplied to the
panel through the serial communication port connection when used with DirectLOGIC PLCs having an RJ12 communication port. EA-MG-SP1 (power supply with serial option module)
required when connecting to third party PLCs. NEMA 4/4X, IP65 (when mounted correctly; for
indoor use only).
<--->
EA1-S3MLW-N
<--->
EA1-S6ML
EA1-S6MLW
EA1-T6CL
5.7-inch C-more Micro-Graphic Touch Panel with STN LCD monochrome, 320x240 dot display.
The panel has white and red LED backlights. Supports 5 selectable backlight colors (White,
Pink1, Pink2, Pink3, and Red). Includes 5 user-defined function keys with LED indicators. 2 built
in serial Ports (RS-232 RJ12 port and 15 pin D-sub RS-232/422/485). NEMA 4/4X, IP65 (when
mounted correctly; for indoor use only).
5.7-inch C-more Micro-Graphic Touch Panel with TFT Color LCD, 320 x 240 dot, 32,768 color
display with LED backlight. 5 user-defined function keys with LED indicators. Two built-in ports
(USB Type-B port and 15-pin D-sub RS-232/422/485 port). Display supports Portrait and
Landscape modes. NEMA 4/4X, IP65 (when mounted correctly; for indoor use only).
EA1-xnxLx-x
Display Type:
S: STN
T: TFT
Backlight Color:
(STN Panels only)
blank: red, green, amber, lime, yellow
W: white, pink1, pink2, pink3, red
Proximity
Sensors
Photo
Sensors
Limit
Switches
<--->
Encoders
Current
Sensors
Pressure
Sensors
<--->
Temperature
Sensors
Pushbuttons/
Lights
Process
<--->
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
<--->
Power
Circuit
Protection
Enclosures
Tools
Display Color:
M: Monochrome
C: Color
Backlight Type:
L: LED
Pneumatics
Safety
Appendix
Product
Index
Features:
blank: Touch Screen
N: Non Touch Screen
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Steppers/
Servos
Motor
Controls
C-more Micro-Graphic Panel Part No. Key:
Display Size:
3: 3.1”
4: 4.1“
6: 5.7”
Series Name:
EA1: C-more Micro-Graphic
Drives
Motors &
Gearbox
3.1-inch C-more Micro-Graphic Non-Touch Panel with High Contrast white and red LED backlights. Supports 5 selectable backlight colors (White, Pink1, Pink2, Pink3 and Red). STN LCD
monochrome, 128 x 64 dot display. Has 5 user-defined function keys with LED indicators. Power
is supplied to the panel through the serial communication port connection when used with
DirectLOGIC PLCs having an RJ12 communication port. EA-MG-SP1 (power supply with serial
option module) required when connecting to third party PLCs. NEMA 4/4X, IP65 (when mounted correctly; for indoor use only).
5.7-inch C-more Micro-Graphic Touch Panel with STN LCD monochrome, 320x240 dot display.
The panel has red and green LED backlights. Supports 5 selectable backlight colors (Red, Green,
Amber, Lime, and Yellow). Includes 5 user-defined function keys with LED indicators. 2 built in
serial Ports (RS-232 RJ12 port and 15 pin D-sub RS-232/422/485). NEMA 4/4X, IP65 (when
mounted correctly; for indoor use only).
Field I/O
Soft
Starters
<--->
4-inch C-more Micro-Graphic Touch Panel with TFT Color LCD, 320 x 240 dot, 32,768 color
display with LED backlight. 5 user-defined function keys with LED indicators. Two built-in ports
(USB Type-B port and 15-pin D-sub RS-232/422/485 port). Display supports Portrait and
Landscape modes. NEMA 4/4X, IP65 (when mounted correctly; for indoor use only).
Programmable
Controllers
C-more &
other HMI
EA1-S3MLW
EA1-T4CL
Systems
Overview
Software
3.1-inch C-more Micro-Graphic Touch Panel with High Contrast white and red LED backlights.
Supports 5 selectable backlight colors (White, Pink1, Pink2, Pink3 and Red). STN LCD monochrome, 128 x 64 dot display. Has 5 user-defined function keys with LED indicators. Power is
supplied to the panel through the serial communication port connection when used with
DirectLOGIC PLCs having an RJ12 communication port. EA-MG-SP1 (power supply with serial
option module) required when connecting to third party PLCs. NEMA 4/4X, IP65 (when mounted correctly; for indoor use only).
NonTouch
Company
Information
Operator Interface
e11-11
Part #
Index
C-more Micro-Graphic Panels Selection Guide
C-more Micro-Graphic Panel Accessories
Part Number
Description
Price
EA-MG-BZ1
8-button keypad bezel for C-more 3” Micro-Graphic panels, with 4 arrow adjust keys, and
ESCAPE, MENU, CLEAR and ENTER buttons. Helps to reduce screen wear in heavy-duty applications where operators can use the keypad. Designed for easy drop-in of the Micro-Graphic
panels.
<--->
20-button keypad bezel with numeric keypad for C-more 3” Micro-Graphic panels, with 4 arrow
adjust keys, and ESCAPE, MENU, CLEAR and ENTER buttons. Helps to reduce screen wear in
heavy-duty applications where operators can use the keypad to enter numeric data. Designed for
easy drop-in of the Micro-Graphic panels.
<--->
EA-MG-P1
Optional DC Power Adapter for C-more 3” Micro-Graphic panels. Required when using third
party PLCs, or when using 24 VDC power instead of the 5 VDC supplied from the RJ12 connector of a Productivity Series, CLICK or Direct LOGIC PLC.
<--->
EA-MG-SP1
Optional Serial Port with DC Power Adapter for C-more 3” Micro-Graphic panels. Serial port is
a D-Sub 15-pin RS-232/RS-422/485 connector. Required when using RS422, RS485 or third
party PLCs.
<--->
EA-MG-COV-CL
Optional clear screen overlay used to protect C-more 3” Micro-Graphic displays from minor
scratches and wear. Package contains 5 clear screen overlays.
<--->
EA-4-COV2
Optional clear screen overlay used to protect C-more 4” Micro-Graphic displays from minor
scratches and wear. Package contains 3 clear screen overlays.
<--->
EA-MG6-BZ2
For Landscape (Horizontal) Mounted Panels. 20-button keypad bezel with numeric keypad for
C-more 6” Micro-Graphic panels, 4 arrow adjust keys, and ESCAPE, MENU, CLEAR and ENTER
buttons. Helps to reduce screen wear in heavy-duty applications where operators can use the
keypad to enter numeric data. Designed for easy drop-in of the Micro-Graphic panels.
<--->
EA-MG6-BZ2P
For Portrait (Vertical) Mounted Panels. 21-button keypad bezel with numeric keypad for
C-more 6” Micro-Graphic panels, 4 arrow adjust keys, and ESCAPE, MENU, CLEAR and
(2) ENTER buttons. Helps to reduce screen wear in heavy-duty applications where operators can use the keypad to enter numeric data. Designed for easy drop-in of the MicroGraphic panels.
<--->
EA-6-COV2
Optional clear screen overlay used to protect C-more 6” Micro-Graphic displays from minor
scratches and wear. Package contains 3 clear screen overlays.
<--->
EA-MG-BZ2
Volume 14
e11-12
Operator Interface
1 - 80 0 - 633 - 0405
C-more 3” Micro-Graphic STN Non-Touch
Model EA1-S3ML-N C-more 3” Micro-Graphic non-touch panel has a 3.1-inch STN LCD
monochrome display and five selectable LED-driven backlight colors: Green, Red, Amber,
Yellow and Lime. It features a 128 x 64 dot display, and five user-defined function keys
each with a user-defined red LED indicator. The panel can display up to 10 lines by 32
characters of static text and up to 10 lines by 21 characters of dynamic text with
embedded variables and phrases mixed with graphics. It is rated UL for use on a flat
surface of Type 1, 4X enclosure (for indoor use only). This Micro-Graphic panel can
receive power from the serial communications port of most AutomationDirect PLCs. An
EA-MG-SP1 Serial Port with DC Power Adapter option module (RS-232/422/485) is
required when using other controllers.
Part No. EA1-S3ML-N
Features
• Free downloadable programming software
• 128 x 64 Dot display with up to 10 lines
by 32 characters of text and graphics
• Up to 10 lines by 21 characters of dynamic
text with embedded variables and phrases
mixed with graphics
• 5 programmable function keys can change
with every screen. Can increment / decrement values, trigger recipes, view index of
screens.
• 5-Color LED backlight for longer lifetime;
Green, Red, Amber, Yellow and Lime
• 2 optional snap-on keypad bezels
• 768 KB memory
• Panel is powered from PLC comm port
when using select AutomationDirect PLCs.
Use optional DC power adapter and serial
port modules if needed for other
controllers (RS-232/422/485)
• Built-in Alarm Control setup that activates
beep, backlight flash, customized alarm
banner, and LED blinking
• 0 to 50 °C (32 to 122 °F) operating
temperature range (IEC 60068-2-14)
• NEMA 4/4X, IP65 compliant when
mounted correctly, indoor use only
• UL, cUL & CE agency approvals
• 2-year warranty from date of purchase
<--->
C
Dimensions
UL
R
US
Units: inches [mm]
NOTE: Don’t forget the optional
keypad bezels, DC power adapter
and serial port with DC power
adapter shown in the Accessories.
Panel Cutout
Panel Thickness
NOTE: The C-more 3” Micro-Graphic cutout dimensions
are not equivalent to previous AutomationDirect text
panels. The C-more Micro-Graphic panels will not fit in
cutouts for DV-1000, EZText or Optimate panels.
Volume 14
e11-18
Operator Interface
1 - 80 0 - 633 - 0405
C-more 3” Micro-Graphic STN Non-Touch
Model EA1-S3ML-N C-more 3” Micro-Graphic non-touch panel has a 3.1-inch STN LCD
monochrome display and five selectable LED-driven backlight colors including White,
PInk1, Pink2, Pink3 and Red. It features a 128 x 64 dot display, and five user-defined function keys each with a user-defined red LED indicator. The panel can display up to 10 lines
by 32 characters of static text and up to 10 lines by 21 characters of dynamic text with
embedded variables and phrases mixed with graphics. It is rated UL for use on a flat
surface of Type 1, 4X enclosure (for indoor use only). This Micro-Graphic panel can
receive power from the serial communications port of most AutomationDirect PLCs. An
EA-MG-SP1 Serial Port with DC Power Adapter option module (RS-232/422/485) is
required when using third-party PLCs.
Part No. EA1-S3MLW-N
Programmable
Controllers
Software
C-more &
other HMI
Drives
Soft
Starters
<--->
C
Dimensions
UL
R
Motors &
Gearbox
US
Steppers/
Servos
Motor
Controls
Units: inches [mm]
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
NOTE: Don’t forget the optional
keypad bezels, DC power adapter
and serial port with DC power
adapter shown in the Accessories.
Panel Cutout
Systems
Overview
Field I/O
Features
• Free downloadable programming software
• 128 x 64 Dot display with up to 10 lines
by 32 characters of text and graphics
• Up to 10 lines by 21 characters of dynamic
text with embedded variables and phrases
mixed with graphics
• 5 programmable function keys can change
with every screen. Can increment / decrement values, trigger recipes, view index of
screens.
• 5-Color LED backlight for longer lifetime;
White, Pink1, Pink2, Pink3 and Red
• 2 optional snap-on keypad bezels
• 768 KB memory
• Panel is powered from PLC comm port
when using select AutomationDirect PLCs.
Use optional DC power adapter and serial
port modules if needed for other
controllers (RS-232/422/485)
• Built-in Alarm Control setup that activates
beep, backlight flash, customized alarm
banner, and LED blinking
• 0 to 50 °C (32 to 122 °F) operating
temperature range (IEC 60068-2-14)
• NEMA 4/4X, IP65 compliant when
mounted correctly, indoor use only
• UL, cUL & CE agency approvals
• 2-year warranty from date of purchase
Company
Information
Comm.
Terminal
Blocks &
Wiring
Power
Panel Thickness
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
NOTE: The C-more 3” Micro-Graphic cutout dimensions
are not equivalent to previous AutomationDirect text
panels. The C-more Micro-Graphic panels will not fit in
cutouts for DV-1000, EZText or Optimate panels.
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Operator Interface
e11-19
Appendix
Product
Index
Part #
Index
C-more 3” Micro-Graphic Specifications
Model
3” STN Micro-Graphic Panel
Touch Screen
3” STN Micro-Graphic Panel
Non-Touch Screen
Part Number
EA1-S3ML, EA1-S3MLW
EA1-S3ML-N, EA1-S3MLW-N
Description
128 x 64 dots LCD display, five user defined keypad function buttons, and five user defined LED's
Specification
Display
• Type
3.1" STN monochrome LCD, graphical characters
• Resolution
128 (W) x 64 (H) dots
• Color
2 colors (normal / inverse)
• Viewing Area Size
2.789” (W) x 1.385” (H) [70.8 mm x 35.2 mm]
• Active Area Size
• Contrast
2.670” (W) x 1.259” (H) [67.8 mm x 32.0 mm]
Adjusted from the panel’s built-in configuration setup menu
3, 9 o’clock axis –> 45 degrees
6 o’clock axis –> 45 degrees
12 o’clock axis –> 30 degrees
• Viewing Angle
Backlight
• Type
• Color
LED
5 user defined colors: EA1-S3ML, EA1-S3ML-N - Red, Green, Amber, Lime, and Yellow
EA1-S3MLW, EA1-S3MLW-N - White, Pink1, Pink2, Pink3 and Red
• User Replaceable
No
Touch Screen
• Type
• Operation
• Life
Analog touch panel
N/A
51 gram force [0.5 N] maximum
N/A
Minimum of 1,000,000 cycles
N/A
Features
• User Memory
• Number of Screens
• Beep (Internal)
• Keypad Function
Buttons
• Keypad Function
Button LEDs
• Serial Communications
• Expansion Connection
768 KB
Up to 999 – limited by project memory usage
Yes
Five user defined function key buttons with the ability to customize the label.
Minimum of 500,000 cycles
Each function key button includes a red LED that can be user programmed.
Built-in RJ12 serial communications port (RS-232).
Optional serial communications port (RS-232, RS-485/422) when using the optional EA-MG-SP1 Serial Port with DC Power Adapter.
Yes – used with optional Keypad Bezels, EA-MG-BZ1 & BZ2, and EA-MG-P1 DC Power Adapter,
and EA-MG-SP1 Serial Port with DC Power Adapter.
Screen Objects
• Functional Devices
• Static Shapes
• Displayable Fonts
Push Button, Switch, Indicator Button, Indicator Light, Graphic Indicator Light, Numeric Display, Numeric Entry, Inc/Dec Value, Bar Graph,
Bitmap Button, Static Bitmap, Dynamic Bitmap, Recipe Button, Static Text, Lookup Text, Dynamic Text, Scroll Text,
Screen Change Push Button, Screen Selector, Adjust Contrast, Function, Key Configuration Object, Realtime Graph, Line Graph, Analog Meter
Lines, Rectangles, Circles and Frames
Fixed fonts: 4x6, 6x6, 6x6B, 6x8, 8x16, 8x32, 8x64, 16x16, 16x32, 16x64, 32x16, 32x32, 32x64, and Windows fonts
C-more 3” Micro-Graphic panel specifications continued on next page.
NOTE: Photo includes EA-MG-BZ2
Volume 14
e11-20
Operator Interface
1 - 80 0 - 633 - 0405
C-more 3” Micro-Graphic Specifications
Model
Specification
Part Number
Company
Information
3” STN Micro-Graphic Panel
Touch Screen
3” STN Micro-Graphic Panel
Non-Touch Screen
EA1-S3ML, EA1-S3MLW
EA1-S3ML-N, EA1-S3MLW-N
Electrical
• Input Voltage Range
Supplied through the panel’s RJ12 serial communications port connection when used with any AutomationDirect PLC having an RJ12
communication port. Can also be supplied from an external 12-24 VDC power source when using the optional EA-MG-P1 DC Power Adapter,
or the optional EA-MG-SP1 Serial Port with DC Power Adapter
• Power Consumption
1.05W (220mA @ 4.75 VDC)
• Recommended Fuse
Type AGC fast acting glass fuse, 250 mA, 250 VAC, ADC p/n AGC-25
No fuse required when directly connected to a PLC or PC with recommended cable.
• Maximum Inrush
Current
• Acceptable External
Power Drop Duration
Environmental
Motors &
Gearbox
Steppers/
Servos
0 to 50 °C (32 to 122 °F) Maximum surrounding air temperature rating: 50 °C
–20 to +60 °C (–4 to +140 °F)
• Humidity
5–95% RH (non-condensing)
• Environmental Air
Motor
Controls
Proximity
Sensors
For use in Pollution Degree 2 Environment
IEC60068-2-6 (Test Fc), 5-9 Hz: 3.5 mm amplitude, 9-150 Hz: 1.0G, sweeping, at a rate of 1 octave/min. (±10%),
10 sweep cycles per axis on each of 3 mutually perpendicular axes
• Vibration
IEC60068-2-27 (Test Ea), 15 G peak, 11 ms duration, three shocks in each direction per axis,
on 3 mutually perpendicular axes (total of 18 shocks)
• Shock
Encoders
CE (EN61131-2), UL508, CUL Canadian C22.2 No. 142-M95, UL File E157382, CSA File 234884
Current
Sensors
4.488” (W) x 3.228” (H) x 1.593” (D) [114.0 mm x 82.0 mm x 40.5 mm]
Pressure
Sensors
• Enclosure
For use on a flat surface of Type 1, 4X enclosure (Indoor use only)
• Agency Approvals
Photo
Sensors
Limit
Switches
NEMA ICS3-304
RFI, (145 MHz, 440 Mhz 10 W @ 10 cm)
Impulse 1000 V @ 1 µs pulse
• Noise Immunity
C-more &
other HMI
Soft
Starters
Maximum 1 ms
• Storage Temperature
Software
Drives
1 A for 500 µs
• Operating Temperature
Programmable
Controllers
Field I/O
5.0 VDC (4.75 – 5.25 VDC)
• Input Power
Systems
Overview
Physical
• Dimensions
• Enclosure Mounting
Thickness Range
• Mounting Clip Screw
Torque Range
• Depth from bezel rear
with options Module
• Weight
Temperature
Sensors
0.04” – 0.2” [1 – 5 mm]
Pushbuttons/
Lights
21 – 28 oz-in [0.15 – 0.2 Nm]
Process
2.295” [58.3 mm]
Relays/
Timers
5.82 oz. (165 g)
Comm.
NOTE: The environmental specifications for the panels shown
above are also applicable for the C-more Micro-Graphic
Accessories shown later in this section of the catalog.
Terminal
Blocks &
Wiring
Supported Protocols / Drivers
Serial - Panel port1 or port2*
Serial - Panel port2 only *
AutomationDirect Productivity Series
AutomationDirect CLICK
AutomationDirect K-sequence
AutomationDirect DirectNET
AutomationDirect Modbus
Modicon Modbus RTU
Entivity Modbus RTU
GS Drives
SOLO Temperature Controller
Allen-Bradley DF1 Full Duplex
Allen-Bradley DF1 Half Duplex
Allen-Bradley PLC5 DF1
Allen-Bradley DH485
GE SNPX (90/30, 90/70, Micro 90, VersaMax Micro)
Mitsubishi FX
Mitsubishi Q & QnA
Omron Host Link (C200 Adapter, C500)
Omron FINS Serial (CJ1, CS1)
Siemens PPI (S7-200 CPU)
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
*Note: Serial port 2 requires the use of EA-MG-SP1 adapter for C-more 3” Micro-Graphic panels
Product
Index
For a list of supported protocols and cabling options refer to
the 3” C-more Micro-Graphic Protocols and cabling chart
starting on page 11-24.
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Operator Interface
e11-21
Part #
Index
C-more 3” Micro-Graphic
Power Connection Wiring
Providing power to the touch panel
• Or install either the DC Power Adapter, EA-MG-P1, or the Serial
Port with DC Power Adapter, EA-MG SP1, to the rear of the
panel and supply the adapter from a 12-24 VDC power source.
• The C-more 3” Micro-Graphic panel is powered during
programming from the PC through the USB to RS-232
Programming Cable Assembly, EA-MG-PGM-CBL.
• During operation, the C-more Micro-Graphic panel is powered from an AutomationDirect CLICK, DirectLOGIC PLC or
Productivity PAC RJ12 serial communications port by using the
DV-1000CBL communications cable.
3” Panel powered from AutomationDirect CLICK or DirectLOGIC
PLC via communications cable
To PLC
RJ12 Port
Power Supplied to Panel through Cable from CLICK and Direct Logic PLC RJ12 port: To C-more
DL05, DL105, DL205, DL350, DL450, H2-WINPLC
Micro-Graphic
Serial Port1
RS-232C (p/n DV-1000CBL)
10 feet [3.0 m] Maximum
Wiring Diagram
RJ12 6-pin
Phone Plug
(6P6C)
1 = Sig GND
2 = +5 VDC
3 = RXD
4 = TXD
5 = not used
6 = Sig GND
GND
TXD
RXD
+5 V
GND
6
1
4
3
3
4
2
5
1
6
RJ12 6-pin
Phone Plug
(6P6C)
GND
RXD
1 = Sig GND
2 = not used
3 = RXD
4 = TXD
5 = +5 VDC
6 = Sig GND
TXD
+5 V
GND
123456
123456
3” panel powered from a DC power adapter – wiring diagram
Serial Port with
DC Power Adapter
EA-MG-SP1
DC Power Adapter
EA-MG-P1
Port 2
+
Recommended
DC Supply Fuse
750 mA fast acting,
ADC p/n AGC-75
Supply to adapter:
1 A @ 12 - 24 VDC
(10.8 - 26.4 VDC)
+
Recommended
DC Supply Fuse
750 mA fast acting,
ADC p/n AGC-75
–
Supply to adapter:
1 A @ 12 - 24 VDC
(10.8 - 26.4 VDC)
–
GND
GND
Equipment
Ground
Equipment
Ground
NOTE: Recommended DC power supply to power either DC Power Adapter,
AutomationDirect Part No. PSP24-024S or PSP24-024C.
Maximum communication cable length when 3” panel is powered from
an optional DC Power Adapter
To PLC
Port Connector
Cable wiring example when power is supplied to panel from either a DC
Power Adapter, EA-MG-P1, or a Serial Port w/ DC Power Adapter, EA-MG-SP1
To C-more
Micro-Graphic
Serial Port 1
50 feet [15.0 m] Maximum
Wiring Diagram
GND
RXD
TXD
GND
1
3
4
6
GND
RJ12 6-pin
Phone Plug
(6P6C)
RXD
TXD
GND
123456
1 = Sig GND
2 = do not use
3 = RXD
4 = TXD
5 = +5 VDC
6 = Sig GND
Volume 14
e11-22
Operator Interface
1 - 80 0 - 633 - 0405
C-more 3” Micro-Graphic PLC Connections
Cabling requirements
The following cables can be used when connecting the
C-more 3” Micro-Graphic panel’s built-in RJ12 serial port
(Port1) with the Productivity Series, CLICK, DL05, DL06,
DL105, DL205, D3-350 and DL405 CPUs.
• DV-1000CBL — connects to Productivity Series, CLICK, DL05,
DL06, DL105, DL205, D3-350 and D4-450 phone jack.
• D4-1000CBL — connects to all DL405 CPU 15-pin ports.
C-more 3” Micro-Graphic Port 1 to CLICK PLC Port 2
CLICK PLC
The Serial Port with DC Power Adapter module,
EA-MG-SP1, can be used with the C-more 3” MicroGraphic panels if the application requires the use of RS422 or RS-485. The serial port on the adapter,
designated as port 2, can also be wired for RS-232. The
use of the adapter permits greater cable length. See the
Communication Protocols & Cabling Charts in this catalog
section for details on the selection of various controllers,
protocols, and connectivity.
Drivers for your Controller
• AutomationDirect Productivity Series
• AutomationDirect CLICK (Modbus)
• DirectLOGIC K-sequence, DirectLOGIC DirectNET, DirectLOGIC
Modbus (Koyo Addressing)
• Modbus RTU
• Allen Bradley DF1 Full Duplex, Allen Bradley DF1 Half Duplex,
Allen Bradley PLC5 DF1, AB DH485
• Omron Host Link (C200 Adapter, C500)
Omron FINS serial (CJ1, CS1)
• GE SNPX (90/30, 90/70, Micro 90, VersaMax Micro)
• Mitsubishi Melsec FX
• Siemens PPI
• Entivity Modbus RTU
• GS Drives
• SOLO Temperature Controllers
• Mitsubishi Q/QnA
DV-1000CBL
serial cable
C-more 3”
Micro-Graphic
Panel
DL-205 PLC
Direct LOGIC
serial cable
p/n DV-1000CBL
Port 1
Port 1
Port
1
Port
1
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
C-more 3” Micro-Graphic Port 1 to DL06 PLC Port 1
C-more 3” Micro-Graphic Port 1 to DL205 PLC Port 1
Programmable
Controllers
Software
C-more 3”
Micro-Graphic
Panel
Port 2
DL-06
PLC
Systems
Overview
Field I/O
Port 1
A maximum cable length of 10 feet between the
C-more Micro-Graphic panel and the PLC is recommended
when powering the panel from the PLC.
Company
Information
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Direct LOGIC
serial cable
p/n DV-1000CBL
Pressure
Sensors
Temperature
Sensors
C-more 3” Micro-Graphic Port 2 to DL06 PLC Port 2
Serial Port w/
DC Power Adapter
EA-MG-SP1
DL-06
PLC
Port
2
Port
2
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
C-more to
Direct LOGIC
VGA 15-pin port
serial cable
p/n EA-2CBL-1
Enclosures
C-more 3”
Micro-Graphic
Panel
C-more 3”
Micro-Graphic
Panel
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Operator Interface
e11-23
Part #
Index
C-more 3” Micro-Graphic Communication
Protocols & Cabling Chart
Contoller Compatibility & Connection Chart
PLC
C-more Micro-Graphic Panel.
Panel to PLC Cabling Components Required for Specific Port and Protocol being used.
PLC Port Powered
Family
CPU
Port &
Type
Powered from an external 24 VDC
source using the DC Power
Adapter, EA-MG-P1.
Using panel’s RJ12 port 1
Using panel’s RJ12 port 1
Protocol(s)
Supported
all versions
CLICK
Analog
CPU’s
Port 1
RJ12 - 6 pin
Automation
Port 2
RJ12 - 6 pin Direct Modbus
(CLICK)
Port 3
Terminal
block - 3-pin
N/A
Term block
3-pin
Serial (P3-550)
N/A
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL
RS-232
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL
RS-232
Port 2
DB15HD
(female)
K-sequence,
Direct NET,
Modbus RTU
Port 1
RJ12 - 6 pin
Port 2
DB15HD
(female)
DV-1000CBL
+ FA-15HD
RS-232
DV-1000CBL
+ FA-15HD
RS-232
DV-1000CBL
RS-232
Using panel’s RJ12 port 1
Protocol(s)
Supported
Automation
Direct Modbus
(CLICK)
DV-1000CBL
RS-232
K-sequence,
Direct NET,
Modbus RTU
N/A
Automation
Direct
Productivity3000
Serial (P3-550)
DV-1000CBL
RS-232
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL
+ FA-15HD
RS-232
DV-1000CBL
+ FA-15HD
RS-232
DV-1000CBL
RS-232
Automation
Direct Modbus
(CLICK)
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL
RS-232
N/A
Automation
Direct
Productivity3000
Serial (P3-550)
DV-1000CBL
RS-232
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL
+ FA-15HD
RS-232
K-sequence
DV-1000CBL
RS-232
K-sequence
DV-1000CBL
RS-232
K-sequence
EA-2CBL
RS-232
EA-2CBL-1
RS-232
Modbus RTU
See Note
RS-422
See Note
RS-485
Modbus only
EA-2CBL
RS-232
K-sequence,
Direct NET,
Modbus RTU
EA-2CBL-1
RS-232
DV-1000CBL
+ FA-15HD
RS-232
DV-1000CBL
RS-232
See Note
RS-485
K-sequence,
Direct NET,
Modbus RTU
Modbus RTU
Direct LOGIC all versions Port 1
RJ12 - 6 pin
DL105
DV-1000CBL
RS-232
EA-2CBL
RS-232
DV-1000CBL
RS-232
K-sequence,
Direct NET,
Modbus RTU
EA-2CBL
RS-232
See Note
RS-485
DV-1000CBL
RS-232
DV-1000CBL
RS-232
K-sequence,
Direct NET,
Modbus RTU
Components &
Network Type
Using adapter’s serial Port 2
15-pin D-sub - female
Protocol(s)
Components &
Supported
Network Type
N/A
DV-1000CBL
RS-232
DV-1000CBL
RS-232
K-sequence,
Direct NET,
Modbus RTU
Components &
Network Type
Serial Port with DC Power Adapter
Powered from an external 24 VDC source using the Serial Port
with DC Power Adapter, EA-MG-SP1.
N/A
Automation
Direct
Productivity3000
Serial (P3-550)
Port 1
RJ12 - 6 pin
D0-DCM
Automation
Direct Modbus
(CLICK)
DV-1000CBL
Port 2
RJ12 - 6 pin
Direct LOGIC
DL06
DV-1000CBL
RS-232
Protocol(s)
Supported
Automation
Port 1
Direct LOGIC
RJ12 - 6 pin
DL05
all versions
all versions
Components &
Network Type
RS-232
RJ12 - 6 pin
Productivity all versions
Direct
RS-485 Port Productivity3000
Series
(see D0-DCM
under DL06)
DC Power Adapter
Powered with 5 VDC from the connected PLC’s comm. port.
K-sequence
See Note
RS-422
See Note
RS-485
Modbus only
EA-2CBL
RS-232
Note: See the C-more Micro-Graphic Hardware User Manual, Chapter 6: PLC Communications, for wiring diagrams that the user can use to construct
their own cables. Available for download at www.automationdirect.com. PLC Compatibility & Connection Chart continued on next page.
Volume 14
e11-24
Operator Interface
1 - 80 0 - 633 - 0405
C-more 3” Micro-Graphic Communication
Protocols & Cabling Chart (cont’d)
Company
Information
Systems
Overview
Programmable
Controllers
Controller Compatibility & Connection Chart
PLC
C-more Micro-Graphic Panel
Field I/O
Panel to PLC Cabling Components Required for Specific Port and Protocol being used.
PLC Port Powered
Family
CPU
Port &
Type
Powered with 5 VDC from the
connected PLC’s comm. port.
DC Power Adapter
Powered from an external 24 VDC
source using the DC Power
Adapter, EA-MG-P1.
Using panel’s RJ12 port 1
D2-230
D2-240
Components &
Network Type
Protocol(s)
Supported
Components &
Network Type
Protocol(s)
Supported
Components &
Network Type
Port 1
RJ12 - 6 pin
K-sequence
DV-1000CBL
RS-232
K-sequence
DV-1000CBL
RS-232
K-sequence
DV-1000CBL
RS-232
Port 1
RJ12 - 6 pin
K-sequence
Port 2
RJ12 - 6 pin
K-sequence,
Direct NET
D2-260
Direct LOGIC
DL305
Port 2
DB15HD
(female)
Port 2
DB15HD
(female)
K-sequence,
Direct NET,
Modbus RTU
K-sequence,
Direct NET,
Modbus RTU
D2-DCM
K-sequence,
Direct NET,
Modbus RTU
WINPLC
Port 1
RJ12 - 6 pin
Modbus RTU
D3-232-DCU
DB 25 pin
.(female)
D3-330 or
D3-340 D3-422-DCU
DB 25 pin
(female)
Port 1
RJ11 - 4 pin
D3-340
Port 2
RJ11 - 4 pin
D3-350
DV-1000CBL
+ FA-15HD
RS-232
DV-1000CBL
+ FA-15HD
RS-232
K-sequence,
Direct NET,
Modbus RTU
K-sequence,
Direct NET,
Modbus RTU
See Note
RS-232
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL
RS-232
K-sequence,
Direct NET
DV-1000CBL
+ FA-15HD
RS-232
DV-1000CBL
+ FA-15HD
RS-232
K-sequence
K-sequence
K-sequence,
Direct NET
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL
+ FA-15HD
RS-232
EA-2CBL
RS-232
EA-2CBL
RS-232
K-sequence,
Direct NET,
Modbus RTU
EA-2CBL-1
RS-232
See Note
RS-422
DV-1000CBL
RS-232
K-sequence,
Direct NET,
Modbus RTU
EA-2CBL
RS-232
EA-2CBL
RS-232
K-sequence,
Direct NET,
Modbus RTU
EA-2CBL-1
RS-232
Modbus RTU
See Note
RS-422
See Note
RS-485
Modbus only
EA-4CBL-2
RS-232
DV-1000CBL
+ FA-15HD
RS-232
See Note
RS-232
K-sequence,
Direct NET,
Modbus RTU
See Note
RS-232
Direct NET
Modbus RTU
DV-1000CBL
RS-232
Modbus RTU
DV-1000CBL
RS-232
Modbus RTU
EA-2CBL
RS-232
Direct NET
See Note
RS-232
Direct NET
See Note
RS-232
Direct NET
EA-4CBL-2
RS-232
Direct NET
See Note
RS-422
N/A
Direct NET
N/A
Direct NET,
Modbus RTU
DV-1000CBL
RS-232
See Note
RS-232
DV-1000CBL
RS-232
Using adapter’s serial Port 2
15-pin D-sub - female
Protocol(s)
Components &
Supported
Network Type
DV-1000CBL
RS-232
N/A
N/A
K-sequence,
Direct NET,
Modbus RTU
K-sequence
DV-1000CBL
RS-232
N/A
K-sequence,
Direct NET
DV-1000CBL
RS-232
DV-1000CBL
RS-232
N/A
Port 2
DB 25 pin
(female)
Port 1
D3-DCM
D3-350 only DB 25 pin
(female)
K-sequence,
Direct NET
DV-1000CBL
RS-232
Port 1
DB 25 pin
(female)
Port 1
RJ12 - 6 pin
K-sequence
DV-1000CBL
RS-232
DV-1000CBL
RS-232
Port 1
RJ12 - 6 pin
Direct LOGIC
DL205
Using panel’s RJ12 port 1
Protocol(s)
Supported
Port 1
RJ12 - 6 pin
D2-250-1
Using panel’s RJ12 port 1
Serial Port with DC Power Adapter
Powered from an external 24 VDC source using the Serial Port
with DC Power Adapter, EA-MG-SP1.
N/A
OP-3CBL-1
RS-232
Direct NET
Direct NET,
Modbus RTU
OP-3CBL-1
RS-232
Direct NET
Direct NET,
Modbus RTU
K-sequence,
Direct NET
DV-1000CBL
RS-232
K-sequence,
Direct NET
DV-1000CBL
RS-232
K-sequence,
Direct NET
K-sequence,
Direct NET,
Modbus RTU
See Note
RS-232
K-sequence,
Direct NET,
Modbus RTU
See Note
RS-232
K-sequence,
Direct NET,
Modbus RTU
K-sequence,
Direct NET,
Modbus RTU
See Note
RS-232
K-sequence,
Direct NET,
Modbus RTU
See Note
RS-232
Direct NET
See Note
RS-422
EA-3CBL
RS-232
EA-2CBL
RS-232
Software
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
EA-4CBL-2
RS-232
Circuit
Protection
See Note
RS-422
Enclosures
EA-4CBL-2
RS-232
See Note
RS-422
Note: See the C-more Micro-Graphic Hardware User Manual, Chapter 6: PLC Communications, for wiring diagrams that the user can use to construct
their own cables. Available for download at www.automationdirect.com. PLC Compatibility & Connection Chart continued on next page.
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Operator Interface
e11-25
Part #
Index
C-more 3” Micro-Graphic Communication
Protocols & Cabling Chart (cont’d)
Controller Compatibility & Connection Chart
PLC
C-more Micro-Graphic Panel
Panel to PLC Cabling Components Required for Specific Port and Protocol being used.
PLC Port Powered
Family
CPU
Port &
Type
Port 0
DB 15 pin
(female)
Powered from an external 24 VDC
source using the DC Power
Adapter, EA-MG-P1.
Using panel’s RJ12 port 1
Using panel’s RJ12 port 1
Protocol(s)
Supported
Components &
Network Type
K-sequence
D4-1000CBL
or DV-1000CBL
& FA-CABKIT
RS-232
D4-430
Port 1
DB 25 pin
(female)
Port 0
DB 15 pin
(female)
N/A
K-sequence
D4-440
Port 1
DB 25 pin
(female)
Direct LOGIC
DL405
Port 0
DB 15 pin
(female)
D4-450
DC Power Adapter
Powered with 5 VDC from the
connected PLC’s comm. port.
D4-1000CBL
or DV-1000CBL
& FA-CABKIT
RS-232
N/A
K-sequence
Port 1
DB 25 pin
(female)
D4-1000CBL
or DV-1000CBL
& FA-CABKIT
RS-232
N/A
DV-1000CBL
RS-232
Protocol(s)
Supported
Components &
Network Type
Serial Port with DC Power Adapter
Powered from an external 24 VDC source using the Serial Port
with DC Power Adapter, EA-MG-SP1.
Using panel’s RJ12 port 1
Protocol(s)
Supported
Components &
Network Type
K-sequence
D4-1000CBL
or DV-1000CBL
& FA-CABKIT
RS-232
K-sequence
D4-1000CBL
or DV-1000CBL
& FA-CABKIT
RS-232
K-sequence
EA-4CBL-1
RS-232
K-sequence,
Direct NET
DV-1000CBL
& FA-CABKIT
RS-232
K-sequence,
Direct NET
DV-1000CBL
& FA-CABKIT
RS-232
K-sequence,
Direct NET
EA-4CBL-2
RS-232
See Note
RS-422
K-sequence
D4-1000CBL
or DV-1000CBL
& FA-CABKIT
RS-232
K-sequence
D4-1000CBL
or DV-1000CBL
& FA-CABKIT
RS-232
K-sequence
EA-4CBL-1
RS-232
K-sequence,
Direct NET
DV-1000CBL
& FA-CABKIT
RS-232
K-sequence,
Direct NET
DV-1000CBL
& FA-CABKIT
RS-232
K-sequence,
Direct NET
EA-4CBL-2
RS-232
See Note
RS-422
K-sequence
D4-1000CBL
or DV-1000CBL
& FA-CABKIT
RS-232
K-sequence
D4-1000CBL
or DV-1000CBL
& FA-CABKIT
RS-232
K-sequence
EA-4CBL-1
RS-232
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL
& FA-CABKIT
RS-232
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL
& FA-CABKIT
RS-232
K-sequence,
Direct NET,
Modbus RTU
K-sequence,
Direct NET
DV-1000CBL
RS-232
K-sequence,
Direct NET
DV-1000CBL
RS-232
K-sequence,
Direct NET
K-sequence,
Direct NET,
Modbus RTU
Port 2
RJ12 - 6 pin
Port 3
DB 25 pin
(female)
K-sequence,
Direct NET
D4-DCM
Port 1
DB 25 pin
(female)
K-sequence,
Direct NET,
Modbus RTU
SOLO
N/A
Data +/terminals
N/A
N/A
N/A
GS Drives
N/A
RS-485
Interface
N/A
N/A
N/A
N/A
N/A
See Note
RS-232
Using adapter’s serial Port 2
15-pin D-sub - female
Protocol(s)
Components &
Supported
Network Type
K-sequence,
Direct NET,
Modbus RTU
N/A
See Note
RS-232
K-sequence,
Direct NET,
Modbus RTU
See Note
RS-232
Direct NET
SOLO
Temperature
Controller
GS Drives
Serial GS
Drives TCP/IP
(GS-EDRV)
EAA-4CBL-2
RS-232
See Note
RS-422
EA-2CBL
RS-232
See Note
RS-422
EA-4CBL-2
RS-232
See Note
RS-422
See Note
RS-485
See Note
RS-485
Note: See the C-more Micro-Graphic Hardware User Manual, Chapter 6: PLC Communications, for wiring diagrams that the user can use to construct
their own cables. Available for download at www.automationdirect.com. PLC Compatibility & Connection Chart continued on next page.
Volume 14
e11-26
Operator Interface
1 - 80 0 - 633 - 0405
C-more 3” Micro-Graphic Communication
Protocols & Cabling Chart (cont’d)
Company
Information
Systems
Overview
Programmable
Controllers
Controller Compatibility & Connection Chart
PLC
C-more Micro-Graphic Panel
Field I/O
Panel to PLC Cabling Components Required for Specific Port and Protocol being used.
PLC Port Powered
Family
CPU
Port &
Type
DC Power Adapter
Powered with 5 VDC from the
connected PLC’s comm. port.
Powered from an external 24 VDC
source using the DC Power
Adapter, EA-MG-P1.
Using panel’s RJ12 port 1
Using panel’s RJ12 port 1
Protocol(s)
Supported
Components &
Network Type
Protocol(s)
Supported
Components &
Network Type
Serial Port with DC Power Adapter
Powered from an external 24 VDC source using the Serial Port
with DC Power Adapter, EA-MG-SP1.
Using panel’s RJ12 port 1
Protocol(s)
Supported
Components &
Network Type
Using adapter’s serial Port 2
15-pin D-sub - female
Protocol(s)
Components &
Supported
Network Type
Software
C-more &
other HMI
Drives
Soft
Starters
8-pin
mini-din port
DF1 Full Duplex
DF1 Half Duplex
EA-MLOGIX-CBL
RS-232
phone plug
DH485/AIC/AIC+
EA-DH485-CBL
RS-232
5/03, 5/04,
5/05
9-pin
D-sub port
Allen-Bradley
SLC500
5/01, 5/02, RJ45 8-pin
DF1 Full Duplex EA-SLC-232-CBL
DF1 Half Duplex
RS-232
5/03
phone plug
DH485/AIC/AIC+
Allen-Bradley
ControlLogix
all
9-pin
D-sub port
DF1 Full Duplex EA-SLC-232-CBL
DF1 Half Duplex
RS-232
Proximity
Sensors
Allen-Bradley
CompactLogix
all
9-pin
D-sub port
DF1 Full Duplex EA-SLC-232-CBL
DF1 Half Duplex
RS-232
Photo
Sensors
Allen-Bradley
FlexLogix
all
9-pin
D-sub port
DF1 Full Duplex EA-SLC-232-CBL
DF1 Half Duplex
RS-232
Limit
Switches
25-pin
D-sub port
DF1 Full Duplex
EA-PLC5--232-CBL
RS-232
RJ45 8-pin
phone plug
DH485/AIC/AIC+
EA-DH485-CBL
RS-232
Allen-Bradley 1000, 1100,
MicroLogix 1200, 1500 RJ45 8-pin
Allen-Bradley
PLC5
GE
all
90/30
15-pin
D-sub port
Micro 90,
VersaMax
Micro
RJ45
Port 1
15-pin
D-sub port
Port 2
Melsec
FX Series
Mitsubishi
SNPX
N/A
N/A
CPU Direct
8-pin
mini-din port
9-pin
D-sub port
Q / QnA
6-pin
mini-din port
Omron
Modicon
Siemens
EA-90-30-CBL
RS-422
See Note
RS-232
EA-90-30-CBL
RS-422
N/A
25-pin
D-sub port
Q / QnA
EA-DH485-CBL
RS-232
EA-MITSU-CBL
RS-422
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
EA-MITSU-CBL-1
RS-422
Relays/
Timers
See Note
RS-232
Comm.
See Note
RS-232
Terminal
Blocks &
Wiring
C200
(Adapter),
C500
25-pin
D-sub port
Host Link
EA-OMRON-CBL
RS-232
CJ1, CS1,
CQM1,
CPM1,
CPM2,
C200
9-pin
D-sub port
FINS
See Note
RS-232
Modbus RTU
See Note
RS-232
Power
Circuit
Protection
Enclosures
Tools
984 CPU,
Quantum
113 CPU,
AEG
Modicon
Micro Series
110 CPU
varies
S7-200
CPU
9-pin
D-sub port
0 or 1
Pneumatics
Safety
PPI
See Note
RS-485
Note: See the C-more Micro-Graphic Hardware User Manual, Chapter 6: PLC Communications, for wiring diagrams that the user can use to construct
their own cables. Available for download at www.automationdirect.com. Available cables with descriptions shown on the next page.
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Operator Interface
e11-27
Appendix
Product
Index
Part #
Index
C-more 3” Micro-Graphic Communication
Cables and Cable Kits
Cable
Description
Cable
Part Number
Price
Cables for direct connect to panel’s serial Port1
(Panel powered from PLC’s serial port.)
AutomationDirect Productivity Series,
AutomationDirect CLICK, Direct LOGIC PLC
RJ-12 port, DL05, DL06, DL105, DL205,
D3-350, D4-450 & H2-WinPLC (RS-232C).
DV-1000CBL
<--->
Direct LOGIC DL405 PLC 15-pin D-sub port,
DL405 (RS-232C).
D4-1000CBL
<--->
FA-15HD
<--->
FA-CABKIT
<--->
OP-3CBL-1
<--->
Direct LOGIC (VGA Style) 15-pin port, DL06,
D2-250 (250-1), D2-260 (RS-232C).
Use with DV-1000CBL cable.
Direct LOGIC PLC 15-pin D-sub port,
DL405 (RS-232C).
Use with DV-1000CBL cable.
Direct LOGIC PLC RJ-11 port,
D3-340 (RS-232C).
DV-1000CBL
D4-1000CBL
OP-3CBL-1
FA-15HD
FA-CABKIT
Cables used with serial Port2
AutomationDirect Productivity Series,
AutomationDirect CLICK, Direct LOGIC PLC
RJ-12 port, DL05, DL06, DL105, DL205,
D3-350, D4-450 & H2-WinPLC (RS-232C).
EA-2CBL
<--->
Direct LOGIC (VGA Style) 15-pin port, DL06,
D2-250 (250-1), D2-260 (RS-232C).
EA-2CBL-1
<--->
Direct LOGIC PLC RJ-11 port,
D3-340 (RS-232C).
EA-3CBL
<--->
Direct LOGIC DL405 PLC 15-pin D-sub port,
DL405 (RS-232C).
EA-4CBL-1
<--->
Direct LOGIC PLC 25-pin D-sub port, DL405,
D3-350, DL305 DCU and all DCM’s (RS-232C).
EA-4CBL-2
<--->
Allen-Bradley MicroLogix 1000, 1100,
1200 & 1500 (RS-232C)
EA-MLOGIX-CBL
<--->
Allen-Bradley SLC 5-03/04/05, ControlLogix,
CompactLogix, FlexLogix
DF1 port (RS-232C)
EA-SLC-232-CBL
<--->
Allen-Bradley PLC-5 DF1 port
(RS-232C)
EA-PLC5-232-CBL
<--->
Allen-Bradley MicroLogix, SLC-5-01/02/03,
PLC5 DH485 port (RS-232C)
EA-DH485-CBL
<--->
GE 90/30 and 90/70, Micro 90,
VersaMax Micro (Port 2)
15-pin D-sub port (RS-422A)
EA-90-30-CBL
<--->
MITSUBISHI FX Series 25-pin port
(RS-422A)
EA-MITSU-CBL
<--->
MITSUBISHI FX Series 8-pin mini-DIN
(RS-422A)
EA-MITSU-CBL-1
<--->
OMRON Host Link
C200 Adapter, C500
(RS-232C)
EA-OMRON-CBL
<--->
EA-DH485-CBL
EA-90-30-CBL
EA-2CBL-1
EA-2CBL
EA-4CBL-1
EA-3CBL
EA-MLOGIX-CBL
EA-4CBL-2
EA-PLC5-232-CBL
EA-SLC-232-CBL
EA-MITSU-CBL
EA-MITSU-CBL-1
EA-OMRON-CBL
Volume 14
e11-28
Operator Interface
1 - 80 0 - 633 - 0405
C-more 3” Micro-Graphic Panel Accessories
8-button Keypad Bezel
The 8-button keypad bezel can be used with both the touch and
non-touch C-more 3” Micro-Graphic panels. The keypad includes
four directional arrow cursor buttons, and one each of an ESCAPE,
MENU, CLEAR and ENTER button. The keypad is intended to be
used with the numeric entry object (Style 3) to allow changing of a
Part No. EA-MG-BZ1
value, and can also be used to navigate & select objects when
using the non-touch panel version.The keypad bezel is designed
for easy drop-in of a C-more 3”Micro-Graphic panel. No panel
configuration required.
Dimensions
Company
Information
Systems
Overview
Programmable
Controllers
Field I/O
Software
C-more &
other HMI
Units: inches [mm]
Drives
Soft
Starters
Motors &
Gearbox
<--->
Steppers/
Servos
2
Motor
Controls
Four directional
cursor buttons, and
ESC, MENU, CLEAR
and ENTER buttons.
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Panel Cutout
Current
Sensors
Pressure
Sensors
Panel Thickness
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
8-Button Keypad Bezel Specifications
Part Number
General
• C-more Micro-Graphic
Panels Supported
• Connection
Terminal
Blocks &
Wiring
EA-MG-BZ1
Power
EA1-S3ML, EA1-S3MLW, EA1-S3ML-N, EA1-S3MLW-N
Connects with expansion connector on the rear of a C-more 3” Micro-Graphic panel.
An expansion connector is also located on the rear of the keypad bezel to allow the EA-MG-P1 DC Power Adapter,
or the EA-MG-SP1 Serial Port with DC Power Adapter to be attached.
• Power Consumption
• Keypad Button Life
None
Pneumatics
Note: The C-more 3” Micro-Graphic panel is installed into the keypad bezel using the
EA-MG-S3ML-BRK mounting clips that are supplied with the panel.
Safety
Appendix
Physical
7.126” (W) x 4.225” (H) x 2.180” (D)
[181.0 mm x 107.3 mm x 55.4 mm]
• Dimensions
• Weight
• Environmental
Product
Index
7.05 oz. [200 g]
See environmental specifications at the beginning of this catalog section.
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Enclosures
Tools
Minimum of 500,000 cycles
(2) mounting clips, EA-MG-BZ1-BRK, included.
• Enclosure Mounting
Circuit
Protection
Operator Interface
e11-29
Part #
Index
C-more 3” Micro-Graphic Panel Accessories
20-Button Keypad Bezel
The 20-button keypad bezel can be used with both the touch and
non-touch C-m ore 3” Micro-Graphic panels. The keypad
includes four directional arrow cursor buttons, a full numeric
keypad, and one each of an ESCAPE, MENU, CLEAR and ENTER
button. The keypad is intended to be used with the numeric entry
object (Style 3) to allow changing of a value, and can also be
Part No. EA-MG-BZ2
used to navigate & select objects when using the non-touch
panel version. The numeric buttons can be used to enter a new
value. The keypad bezel is designed for easy drop-in of a
C-more 3” Micro-Graphic panel. No panel configuration
required.
Dimensions
Units: inches [mm]
<--->
Four directional
cursor buttons,
numeric buttons,
and ESC, MENU,
CLEAR and ENTER
buttons.
F
7
8
9
E
4
5
6
G
1
2
3
H
+/ –
0
.
Esc
Menu
CLR
Enter
Panel Cutout
Panel Thickness
20-Button Keypad Bezel Specifications
Part Number
General
• C-more Micro-Graphic
Panels Supported
• Connection
• Power Consumption
• Keypad Button Life
EA-MG-BZ2
EA1-S3ML, EA1-S3MLW, EA1-S3ML-N, EA1-S3MLW-N
Connects with expansion connector on the rear of a 3” C-more Micro-Graphic panel.
An expansion connector is also located on the rear of the keypad bezel to allow the EA-MG-P1 DC Power Adapter,
or the EA-MG-SP1 Serial Port with DC Power Adapter to be attached.
None
Minimum of 500,000 cycles
(6) mounting clips, EA-MG-BZ2-BRK, included.
• Enclosure Mounting
Note: The C-more 3” Micro-Graphic panel is installed into the keypad bezel using the
EA-MG-S3ML-BRK mounting clips that are supplied with the panel.
Physical
• Dimensions
• Weight
Environmental
8.150” (W) x 4.225” (H) x 2.180” (D)
[207.0 mm x 107.3 mm x 55.4 mm]
7.40 oz. [210 g]
See environmental specifications at the beginning of this catalog section.
Volume 14
e11-30
Operator Interface
1 - 80 0 - 633 - 0405
C-more 3” Micro-Graphic Panel Accessories
DC Power Adapter
The C-more 3” Micro-Graphic panel is designed to use the 5
VDC power that is available from an RJ12 serial communications port found on some AutomationDirect PLC’s. However, for
other devices that do not supply power through their serial
commun cations port, the EA-MG-P1 DC power adapter or EAMG-SP1 serial port with DC power adapter must be used. Both
Part No. EA-MG-P1
adapters require power from a 12-24 VDC source. The EAMG-P1 DC Power Adapter for C-more 3” Micro-Graphic panels
is designed to easily snap on to the rear of a C-more 3” MicroGraphic panel or the rear of an optional Keypad Bezel being
used with a C-more 3” Micro-Graphic panel.
Dimensions
Company
Information
Systems
Overview
Programmable
Controllers
Field I/O
Software
C-more &
other HMI
Drives
Units: inches [mm]
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
<--->
Proximity
Sensors
Photo
Sensors
Limit
Switches
Panel overall depth
with adapter installed
Encoders
Current
Sensors
Pressure
Sensors
2.298
[58.4]
Temperature
Sensors
Pushbuttons/
Lights
Process
Units: inches [mm]
Relays/
Timers
DC Power Adapter Specifications
Part Number
Electrical
• Input Voltage
• Input Voltage Range
• Power Consumption
• Maximum Power
• Maximum Inrush Current
• Recommended Fuse
• Connector Type
Physical
EA-MG-P1
Comm.
Terminal
Blocks &
Wiring
12-24 VDC
10.8-26.4 VDC
Power
100 mA @ 24 VDC
2.90 Watts
Circuit
Protection
5 A @ 500 µs with 12 VDC applied, 10 A @ 500 µs with 24 VDC applied
Type AGC fast acting glass fuse, 750 mA, 250 VAC, ADC #AGC-75
• Dimensions
• Weight
Environmental
3-pin screw type terminal block
Enclosures
3.823” (W) x 3.284” (H) x 1.331” (D)
[97.1 mm x 83.4 mm x 33.8 mm]
Pneumatics
Tools
Safety
2.8 oz. [80 g]
See environmental specifications at the beginning of this catalog section.
Appendix
Product
Index
NOTE: Recommended DC power supply to power either DC Power Adapter,
AutomationDirect Part No. PSP24-024S or PSP24-024C.
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Operator Interface
e11-31
Part #
Index
C-more 3” Micro-Graphic Panel Accessories
Serial Port with DC Power Adapter
The C-more 3” Micro-Graphic panel is designed to use the
5 VDC power that is available from an RJ12 serial communications port of some AutomationDirect PLC’s. However, for other
devices that do not supply power through their serial communications port, the EA-MG-P1 DC power adapter or EA-MG-SP1
serial port with DC power adapter must be used. The EA-MG
SP1, with D-Sub 15-pin RS-232/RS-422/485 serial port, can be
used to connect to a PLC using RS-232 or RS-422/485. The
adapter requires power from a 12-24 VDC source. This optional
Serial Port with DC Power Adapter for C-more 3” Micro-Graphic
panels is designed to easily snap on to the rear of a C-more 3”
Micro-Graphic panel or the rear of an optional Keypad Bezel
being used with a C-more 3” Micro-Graphic panel.
Part No. EA-MG-SP1
Dimensions
Units: inches [mm]
Supports:
RS-232,
RS-485,
& RS-422
3.661
[93.0]
0.162
[4.1]
2.740
[69.6]
Port 2
1.689
[42.9]
0.902
[22.9]
TOP VIEW
Port 2
<--->
Panel overall depth
with adapter installed
2.716
[69.0]
2.031
[51.6]
0.406
[10.3]
Port 2
LEFT VIEW
2.833
[72.0]
REAR VIEW
Port 2
Units: inches [mm]
Serial Port w/ DC Power Adapter Specifications
EA-MG-SP1
Part Number
Serial PLC Interface
RS-232 & RS-485/422
• Interface Standard
Baud
rate:
9600, 19200 or 38400 bits/sec
• Adjustable Settings
Data bits: 7/8 bits
from Software
Parity: None, Odd/Even
(Dependent on PLC Protocol)
Stop bits: 2/1 bits
15-pin D-sub connector (female)
• Connector Type
Electrical
12-24 VDC
• Input Voltage
10.8-26.4 VDC
• Input Voltage Range
100 mA @ 24 VDC
• Power Consumption
2.90 Watts
• Maximum Power
5
A
@
500
µs
with
12
VDC
applied,
10 A @ 500 µs with 24 VDC applied
• Maximum Inrush Current
Type AGC fast acting glass fuse, 750 mA, 250 VAC, ADC #AGC-75
• Recommended Fuse
3-pin screw type terminal block
• Connector Type
Physical
• Dimensions
• Weight
• Environmental
FRONT VIEW
NOTE: Recommended DC power
supply to power either DC Power
Adapter, AutomationDirect Part
No. PSP24-024S or PSP24-024C.
PLC Serial
Communications Port 2
Pin
Signal
Pin
1
Frame GND
6
LE
Signal
Pin
11
Signal
2
TXD (232C)
7
CTS (232C)
12 TXD– (422/485)
3
RXD (232C)
8
RTS (232C)
13 Term. Resistor
4
Future
9
RXD+ (422/485)
14 do not use
5
Logic GND
10 RXD– (422/485)
15 do not use
TXD+ (422/485)
Serial Port 2
8
1
15
9
3.823” (W) x 3.284” (H) x 1.331” (D)
[97.1 mm x 83.4 mm x 33.8 mm]
2.8 oz. [80 g]
See environmental specifications at the beginning of this catalog section.
Volume 14
e11-32
Operator Interface
1 - 80 0 - 633 - 0405
C-more 3” Micro-Graphic Panel Accessories
Clear Screen Overlay
Optional clear screen overlay used to protect C-more 3” Micro-Graphic displays from minor scratches and
wear. Package contains 5 clear screen overlays.
Systems
Overview
Programmable
Controllers
Dimensions
Part No. EA-MG-COV-CL
Company
Information
Field I/O
Software
Units: inches [mm]
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
<--->
Motor
Controls
Proximity
Sensors
Clear screen overlay installation
Photo
Sensors
Step 2
Step 1
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Remove the overlay from the
package
Step 3
Pushbuttons/
Lights
Remove the paper backing
from the overlay
Process
Relays/
Timers
Comm.
Step 4
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Align the overlay with the screen
and press the adhesive firmly
into place
Tools
Remove the protective film*
Pneumatics
Safety
Appendix
Product
Index
*Note: The overlay cover ships with a thin protective film on the
face that should be carefully removed after installation.
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Operator Interface
e11-33
Part #
Index
C-more 3” Micro-Graphic Replacement Parts
The optional replacement parts can be used to replace damaged, worn or lost C-more 3” Micro-Graphic panel components.
Replacement parts at a glance:
Part Number
Description
Price
EA-MG-S3ML-BRK
Replacement mounting clip for C-more 3” Micro-Graphic panels (pk of 2)
<--->
EA-MG-BZ1-BRK
Replacement mounting clip for C-more 3” Micro-Graphic keypad bezel p/n EA-MG-BZ1 (pk of 2)
<--->
EA-MG-BZ2-BRK
Replacement mounting clip for C-more Micro-Graphic keypad bezel p/n EA-MG-BZ2 and C-more 6” Micro-Graphic panels
and bezels (pk of 8)
<--->
EA-MG-DC-CON
Replacement adapter DC power connector for optional p/n EA-MG-P1 and p/n EA-MG-SP1 power adapters used with C-more
3” Micro-Graphic panels and C-more 6” Micro-Graphic panels and bezels (pk of 5)
<--->
EA-MG-S3ML-GSK
Replacement mounting gasket for C-more 3” Micro-Graphic panels
<--->
EA-MG-BZ1-GSK
Replacement mounting gasket for C-more 3” Micro-Graphic keypad bezel p/n EA-MG-BZ1
<--->
EA-MG-BZ2-GSK
Replacement mounting gasket for C-more 3” Micro-Graphic keypad bezel p/n EA-MG-BZ2
<--->
EA-MG-S3ML-FKL
Replacement function key label insert for C-more 3”Micro-Graphic panels (pk of 10; 5 blank, 5 F1-F5)
<--->
Panel Mounting Clips
Part No. EA-MG-S3ML-BRK
(pk of 2)
DC Power Connector
Part No. EA-MG-DC-CON
Keypad Bezel 1 Mounting Clips
Part No. EA-MG-BZ1-BRK
(pk of 2)
Keypad Bezel 2 Mounting Clips
Part No. EA-MG-BZ2-BRK
(pk of 8)
3” Panel Gasket
Part No. EA-MG-S3ML-GSK
3” Keypad Bezel 1 Gasket
Part No. EA-MG-BZ1-GSK
(pk of 5)
3” Keypad Bezel 2 Gasket
Part No. EA-MG-BZ2-GSK
3” Panel Function Keys Label Inserts
Part No. EA-MG-S3ML-FKL
(pk of 10 - 5 blank, 5 F1-F5 )
Volume 14
e11-34
Operator Interface
1 - 80 0 - 633 - 0405
C-more Micro-Graphic Programming Software
FREE software!
C-m ore Micro-Graphic Programming Software can be downloaded at no
charge or a CD version may be purchased by ordering EA-MG-PGMSW. The
software requires a USB port on your PC to connect to the C-more MicroGraphic panel. Software Help Files are included in the download. This software programs all the C-more Micro-Graphic panels (does not program the
C-more 6” through 15” touch panels).
Note: This software is used to program C-more
Micro-Graphic panels only.
Part Numbers: EA1-S3ML, EA1-S3ML-N, EA1-S3MLW,
EA1-S3MLW-N, EA1-T4CL, EA1-S6ML, EA1-S6MLW,
EA1-T6CL
C- more Micro-Graphic Programming
Software is a spin-off of its powerful
sibling C-more Touch Panel. It offers
very high end features designed to
reduce your configuration time. Simply
drag and drop the objects from the
object list (right side of screen) onto the
the screen construction area. Then
configure your PLC tags and click on
the objects you wish to use. Use the
built-in simulator to review your work on
your PC before ever downloading your
project! The time saving benefits of the
C- more Micro-Graphic configuration
software could easily pay for the panel.
Check out www.C moreMicro.com to
download a free version.
Thumbnail
project
preview
pane
Helps keep track of
multi-screen projects.
PC requirements
NOTE: Software and Firmware Version 3.0 or later is required
with model EA1-T4CL.
Software and Firmware Version 2.50 or later is required with
model EA1-T6CL.
Software and Firmware Version 2.0 or later is required with
models EA1-S6ML and EA1-S6MLW.
Software and Firmware Version 1.5 or later is required with
models EA1-S3MLW and EA1-S3MLW-N.
Available for free download at www.automationdirect.com.
Built-in user
object/screen libraries
Built-in project simulator
• Runs your project on your PC
• Test all of your screens before downloading
• Time savings pays for the panel
• Version 2.5 or later - Simulate function keys
and keypad bezel.
Save time by re-using your custom
objects and screens.
Scrolling
object
selection
window
Lets you find the
object you want
fast. Just drag
and drop it on
the screen.
Scrolling help window
Following are the minimum system requirements for running C-more Micro-Graphic Gives you helpful information on each object
Programming Software, EA-MG-PGMSW, on a PC:
• Personal Computer with a 333 MHz or higher processor (CPU) clock speed recommended;
• Keyboard and Mouse or compatible pointing device
• Super VGA color video adapter and monitor with at least 800 x 600 pixels resolution
(1024 x 768 pixels recommended) 64K color minimum
• 150 MB free hard-disk space
• 128 MB free RAM (512 MB recommended); 512 MB free RAM (1GB recommended) for Vista
• CD-ROM or DVD drive for installing software from the CD, or internet access to download free
programming software
• USB port to use with an EA-MG-PGM-CBL, USB to RS232 Programming Cable Assembly for project transfer from the programming software to the STN, panels, or USB-CBL-AB6 for TFT panels
• Operating System - Windows® XP Home / Professional Edition Service Pack 2, Windows® 2000
with Service Pack 4, Windows® Vista or Windows® 7.
Volume 14
e11-66
Operator Interface
1 - 80 0 - 633 - 0405
C-more Micro-Graphic Programming Software
C-more Micro-Graphic Panel Objects
Object
The Line object, just like with drawing tools, allows the user to insert a straight line
drawing into a project. When a Line is inserted into a project, a window opens to
allow the user to setup all available parameters for the Line object. Some of the
uses for Line Objects include but are not limited to adding callouts, pointers, or
indicators.
Graphic
The Rectangle object, just like with drawing tools, allows the user to insert a
drawing of a Rectangle as well as other geometric shapes into a project. When
this object is inserted into a project, a window opens to allow the user to setup all
available parameters for the Rectangle object.
The Circle object, just like with drawing tools, allows the user to insert a drawing
of a Circle or ellipse shape into a project. When this object is inserted into a
project, a window opens to allow the user to setup all available parameters for
the Circle object.
The Frame object allows the user to insert a Frame to the project that can be used
to Frame other objects. Some of the uses for Frame object include but are not
limited to graphically separating objects for different operations that may appear
on one screen and emphasizing pushbuttons or other objects that may require
more attention by the operator.
The Pushbutton object is available from the Button Category of the Object List
window. The Pushbutton object is an electronic version of a typical Pushbutton
normally found on control panels. The Pushbutton object can be used to activate
or deactivate components assigned to a Discrete Tag Name.
The Switch object is an electronic version of a typical Switch that normally can be
found on control panels. The Switch object can be used to activate or deactivate
components assigned to a Discrete Tag Name.
The Indicator Button object is available from the Button Category of the Object List
window. The Indicator Button object is an electronic version of a typical Indicator
Button normally found on control panels. The Indicator Button is a combination of a
Pushbutton and an Indicator Light. The Indicator Button can be used to activate or
deactivate components assigned to a Discrete Tag Name.
The Indicator Light object is an electronic version of a typical Indicator Light
normally found on industrial control panels. The Indicator Light can be configured
to display the status of the assigned Discrete Tag Name.
The Graphic Indicator Light object is a more enhanced version of the “Indicator
Light Object” that allows the user to choose more detailed graphics to display the
status of a tag. This object is an electronic version of a typical Indicator Light
normally found on industrial control panels. The Indicator Light can be configured
to display the status of the assigned Discrete Tag Name.
The Numeric Dis play consists of a frame that displays a real-time numeric value
according to the value of data received from an assigned Tag Name. The
Numeric Display supports numeric Signed Decimal, Unsigned Decimal, BCD,
and Floating Point data types with up to 11 digits, including decimal point. User
Defined Alpha Numeric Prefix and Suffix values are also supported.
The Numeric Entry object is used to enter a value from your Panel to a PLC
Register. This object, when selected, opens a Numeric Keypad that allows the user
to enter a new value that will be written to the assigned Tag Name. The Numeric
Entry supports numeric Signed Decimal, Unsigned Decimal, BCD, and Floating
Point data types with up to 11 digits, including decimal points. User Defined
Alpha Numeric Prefix and Suffix values are also supported.
The Increment/Decrement V alue object is used to add or subtract a value by
pressing a button on the Panel. Basically the object uses two Tags, one to read a
value from and another to write a modified value to. The Increment/Decrement
Value supports numeric Signed Decimal, Unsigned Decimal, BCD, and Floating
Point data types with up to 11 digits, including decimal points. The Increment and
decrement values are also user selectable.
The Real Time Graph object displays the value stored in up to two PLC tags, over
a history of up to 24 points each. One point is added at each refresh.
The Line Graph object displays the values of up to 24 PLC address points. Up to
two address arrays can be displayed. The line is drawn in its entirety at each
refresh.
Object
Graphic
The Analog Meter object is used to display the current value of a Tag Name.
The Bar Meter object is used to monitor up to two assigned Tag Names continuously. This object has various appearances depending upon the relative value of
the tags. The Bar Meter can be used to create digital versions of level, current,
and flow meters to name a few samples, or gauges that measure speed and other
measurable data.
The Bitmap B utton object offers the ability to use a Bitmap graphic to perform the
functions of a Button. This allows users to create their own graphics and implement them within the software project. The Bitmap Button object can be used to
activate or deactivate components assigned to a Discrete Tag Name. The C-more
Micro-Graphic display only supports two colors, black and white.
The Static Bitmap offers the ability to display a Bitmap graphic on any screen. The
Static Bitmap does not change state. Refer to the Dynamic Bitmap Object if you
require the graphic object to change state based on a Tag Value in your PLC. The
dialog box for a "Static Bitmap" object allows you to "read from disk" and select
a graphic file for import. Graphics must be in one of the following formats: .BMP
.WMF .JPG .JPEG
Recipe objects make it easy to make a large number of tag changes with the push
of a single button. Create Recipes with up to 99 entries, and multiple sets of
values. Then just push a button to load an entire set of values into the group of
recipe tags.
The Dynamic Bitmap object offers the ability to make an object using two different
Bitmap graphics that will display one graphic when the Tag is On and a different
graphic when the Tag is Off. Use your own bitmap designs or use some of the
bitmaps provided with the software that are located in the User Graphic Library.
The Static Text object is used to display a Frame with a personalized Message.
This Frame and Message can be placed on any screen and any location within
the screen.
The Lookup Text object is used to display a Frame with a personalized Message.
This Frame and Message can be placed on any screen and any location within
the screen. The object is always displayed like a sign but is configured to display
only the message prompted by an assigned Tag Name. Messages are retrieved
from a Message Database which is configured by the user with text defined by the
user. The Lookup Text Object will scroll text up to 128 characters.
The Dynamic Text object is used to display text that is retrieved from data stored
in a Tag. The Tag Name is assigned to registers in the PLC that contain set character data. The data can be stored in the PLC in ASCII format and may include
information such as machine numbers, locations, part numbers, and such. The
Message can be configured to be visible (Trigger) when an associated Tag Name
is On or Off. This object can be placed on any screen and any location within the
screen. The Dynamic Text Object will scroll text up to 40 characters.
The Scroll Text object is available from the Text Category of the Object List
window. The Scroll Text object is an electronic version of a marquee. It is similar
to the Static Text Object. If the text in the object does not fit in the window, it will
scroll from right to left across the window. The Scroll Text object does not require
a Tag Name assignment. The Scroll Text Object has a maximum character limit
of 128 characters.
The Screen Change Pushbutton object is available from the Control Category of
the Object List window. The Screen Change Pushbutton object is a pushbutton
that can be configured to activate another screen in the project. This object may
be edited to various colors and sizes. Users can configure the button to activate
the Power-Up screen, Forward Screen, Previous Screen, or any one of the project
screens.
The Screen Selector object is available from the Control Category of the Object
List window. This object is an enhanced version of the Screen Change pushbutton
in that it offers many more features and defaults with data from screens in the
project. This helps to save time by not having to create Screen change buttons for
each screen. This object may be edited to various colors and sizes.
The Adjust Display Contrast object is used to allow the operator to adjust the
Panel Display Contrast. The default Display setting often works in most applications, however lighting may vary based on the location of each application. In
these cases the operator can use this object to make adjustments. The current
display setting value will appear on the top of the button and will change as the
arrow keys are pressed. This button can be modified to various sizes.
The Function object is used to assign the panels function key buttons to a particular action as well as assigning the control of the LED On/Off status. When a
button has been assigned as a shift button, the then F1 through F5 will become
F6 through F10. The Function Object buttons will activate when the hardware
button is pressed or when the object is pressed on the screen. The object size is
restricted so that the keys will line up with the hardware function keys on the
panel.
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Operator Interface
e11-67
Company
Information
Systems
Overview
Programmable
Controllers
Field I/O
Software
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Part #
Index
C-more Micro-Graphic Programming
Connections
C-more STN Micro-Graphic Programming Connection
Using the C-mo re Micro-Graphic Programming Software for project
development, STN C-more Micro-Graphic panels can be connected to a PC (personal
computer) by using EA-MG-PGM-CBL, the USB-to-RS-232 cable assembly.
• Connect the USB programming cable (included) from a USB port type A on the PC to the USB
type B port on the converter (included). Next connect the serial programming cable from the
converter’s RJ12 port to the panel’s RJ12 serial port. The panel receives power from the USB
port of the PC that it is connected to through the USB to RS-232 converter assembly.
USB Connectivity
USB
Cable
USB to RS-232 Programming Cable
Assembly
PC to Panel Programming
Cable Assembly
(Includes serial & USB cables)
p/n EA-MG-PGM-CBL
Serial
Cable
USB to RS232
Converter
Part No. EA-MG-PGM-CBL
C-more 3”
Micro-Graphic
Panel
User PC
NOTE: The TFT panels EA1-T4CL and EA1-T6CL do NOT use the EA-MG-PGM-CBL
assembly. The TFT panels use a standard USB A-to-B type cable such as USB-CBL-AB6.
See below.
<--->
USB to RS-232 Converter Specifications
Part Number
Hardware
EA-MG-PGM-CBL
USB Interface
USB Specification Rev. 1.1
Connector: USB Type B jack to accept USB Type B cable plug
RS-232 (EIA-232-E)
Connector: RJ12 phone jack 6p to accept RJ12 cable plug
115.2 kbps Maximum
Serial Interface
Baud Rate
Input Voltage
Power Consumption
Accessory Cables (included)
USB Cable
Serial Cable
Physical
5 VDC (Supplied thru serial interface cable.)
50 mA (Does not include power to panel and/or bezel.)
USB Type A plug to PC on one end, USB Type B plug to converter on other end, 0.30 m [1 foot] length (* Note)
RJ12 phone plug connectors on both ends, 2.0 m [6.56 feet] length (* Note)
2.559” (W) x 1.417” (H) x 0.886” (D)
[65.0 mm x 36.0 mm x 22.5 mm]
1.06 oz. [30 g]
Dimensions
Weight
Environmental
See Micro-Graphic panel specifications at the beginning of this catalog section.
* Note: Maximum cable length for either the USB or serial cable should not exceed 2.0 m [6.56 feet] in length.
C-more TFT Micro-Graphic Programming Connection
The C-more TFT Micro-Graphic panels EA1-T4CL and EA1-T6CL include an integral USB to serial converter. It is programmed via any
USB Type A to Type B cable.
When properly installed on your PC, the device driver will be assigned a communication port number and appear in Windows Device
Manager as a serial com port.
USB cable options for programming EA1-T4CL and EA1-T6CL
Part Number
Description
Price
USB-CBL-AB3
Standard 3-ft. (0.9 m) USB 2.0 cable, A-type connector to B-type connector, used to connect personal computer to any C-more touch
panel for setup and programming. (Note: Touch panels require a 24 VDC power source for configuration and operation.)
<--->
USB-CBL-AB6
Standard 6-ft. (1.8 m) USB 2.0 cable, A-type connector to B-type connector, used to connect personal computer to any C-more touch
panel for setup and programming. (Note: Touch panels require a 24 VDC power source for configuration and operation.)
<--->
USB-CBL-AB10
Standard 10-ft (3 meter) USB 2.0 cable, A-type connector to B-type connector, used to connect personal computer to any C-more touch
panel for setup and programming. (Note: Touch panels require a 24 VDC power source for configuration and operation.)
<--->
USB-CBL-AB15
Standard 15-ft. (4.6 m) USB 2.0 cable, A-type connector to B-type connector, used to connect personal computer to any C-more touch
panel for setup and programming. (Note: Touch panels require a 24 VDC power source for configuration and operation.)
<--->
Volume 14
e11-68
Operator Interface
1 - 80 0 - 633 - 0405
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement