Advantech	Computer Hardware	PCI-1710UL
Data Acquisition Boards
Data Acquisition and Control Tutorial & Software
ActiveDAQ Pro Introduction
Glossary
Selection Guide
16-2
16-4
16-6
16-8
Multifunction Cards
PCI-1710U/UL
PCI-1710HGU
PCI-1711U/UL
PCI-1712/L
PCI-1716/L
PCI-1718HDU
PCI-1741U
PCI-1742U
PCL-711B
PCL-812PG
PCL-818HD/HG
PCL-818L
100 kS/s, 12-bit, 16-ch Universal PCI Multifunction Card
100 kS/s, 12-bit, 16-ch Universal PCI Multifunction Card with High Gain
Entry-level 100 kS/s, 12-bit, 16-ch Universal PCI Multifunction Card
1 MS/s, 12-bit, 16-ch PCI Multifunction Card
250 kS/s, 16-bit, 16-ch PCI Multifunction Card
100 kS/s, 12-bit, 16-ch Universal PCI Multifunction Card
200 kS/s, 16-bit, 16-ch Universal PCI Multifunction Card
1 MS/s, 16-bit, 16-ch Universal PCI Multifunction Card
40 kS/s, 12-bit, 8-ch ISA Multifunction Card
30 kS/s, 12-bit, 16-ch ISA Multifunction Card
100 kS/s, 12-bit, 16-ch ISA Multifunction Card
40 kS/s, 12-bit, 16-ch ISA Multifunction Card
16-18
16-20
16-22
16-24
16-26
16-28
16-30
16-31
16-32
Analog I/O Cards
PCIE-1744 (New)
PCI-1714U
PCI-1714UL
PCI-1713U
PCI-1715U
PCI-1747U
PCL-813B
PCI-1720U
PCI-1721
PCI-1723
PCI-1724U
PCI-1727U
PCL-727
PCL-726
PCL-728
30 MS/s, 12-bit, Simultaneous 4-ch Analog Input PCI Express Card
30 MS/s, 12-bit, Simultaneous 4-ch Analog Input Universal PCI Card
10 MS/s, 12-bit, Simultaneous 4-ch Analog Input Universal PCI Card
100 kS/s, 12-bit, 32-ch Isolated Analog Input Universal PCI Card
500 kS/s, 12-bit, 32-ch Isolated Analog Input Universal PCI Card
250 kS/s, 16-bit, 64-ch Analog Input Universal PCI Card
25 kS/s, 12-bit, 32-ch Isolated Analog Input ISA Card
12-bit, 4-ch Isolated Analog Output Universal PCI Card
12-bit, 4-ch Analog Output PCI Card with 16-ch Digital I/O
16-bit, 8-ch Analog Output PCI Card with 16-ch Digital I/O
14-bit, 32-ch Isolated Analog Output Universal PCI Card
14-bit, 12-ch Analog Output Universal PCI Card with 32-ch Digital I/O
12-bit, 12-ch Analog Output ISA Card with 32-ch Digital I/O
12-bit, 6-ch Analog Output ISA Card with 32-ch Digital I/O
12-bit, 2-ch Isolated Analog Output ISA Card
16-34
16-35
16-36
16-37
16-38
16-39
16-40
16-41
16-42
16-43
16-44
16-45
16-46
Digital I/O & Counter Cards
PCI-1735U
PCI-1737U
PCI-1739U
PCI-1751
PCI-1753
PCI-1753E
PCI-1755
PCI-1757UP
PCL-720+
PCL-722
PCL-724
PCL-731
PCI-1730U
PCI-1733
PCI-1734
PCI-1750
PCI-1752U
PCI-1754
PCI-1756
PCI-1758UDI
PCI-1758UDO
PCI-1758UDIO
PCI-1760U
PCI-1761
PCI-1762
PCL-725
PCL-735
PCI-1780U
PCL-836
PCI-1671UP
64-ch Digital I/O and Counter Universal PCI Card
24-ch Digital I/O Universal PCI Card
48-ch Digital I/O Universal PCI Card
48-ch Digital I/O and 2-ch Counter PCI Card
96-ch Digital I/O PCI Card
96-ch Digital I/O Extension Card for PCI-1753
80 MB/s, 32-ch Digital I/O PCI Card
24-ch Digital I/O Low Profile Universal PCI Card
64-ch Digital I/O and Counter ISA Card
144-ch Digital I/O ISA Card
24-ch Digital I/O ISA Card
48-ch Digital I/O ISA Card
32-ch Isolated Digital I/O Universal PCI Card
32-ch Isolated Digital Input PCI Card
32-ch Isolated Digital Output PCI Card
32-ch Isolated Digital I/O and 3-ch Counter PCI Card
64-ch Isolated Digital Output Universal PCI Card
64-ch Isolated Digital Input PCI Card
64-ch Isolated Digital I/O PCI Card
128-ch Isolated Digital Input Universal PCI Card
128-ch Isolated Digital Output Universal PCI Card
128-ch Isolated Digital I/O Universal PCI Card
8-ch Relay and 8-ch Isolated Digital Input Universal PCI Card with 10-ch Counter/Timer
8-ch Relay and 8-ch Isolated Digital Input PCI Card
16-ch Relay and 16-ch Isolated Digital Input PCI Card
8-ch Relay and 8-ch Isolated Digital Input ISA Card
12-ch Relay ISA Card
8-ch, 16-bit Counter/Timer Universal PCI Card
6-ch, 16-bit Counter/Timer ISA Card GBIP Card
IEEE-488.2 Interface Low Profile Universal PCI Card
16-47
16-48
16-49
16-50
16-51
16-52
16-53
16-54
16-55
16-56
16-57
16-58
16-59
16-60
16-61
16-62
16-63
16-64
16-65
16-66
16-67
PC/104 & PCI-104 DAQ Modules
PCM-3810I (New)
PCM-3813I
PCM-3718H/HG/HO
PCM-3724
PCM-3725
PCM-3730
PCM-3780
PCM-3730I
PCM-3753I
PCM-3761I
250 kS/s, 12-bit, 16-ch Multifunction PCI-104 Module
100 kS/s, 12-bit, 32-ch Isolated Analog Input PCI-104 Module
100 kS/s, 12-bit, 16-ch Multifunction PC/104 Module
48-ch Digital I/O PC/104 Module
8-ch Relay and Isolated Digital Input PC/104 Module
16-ch Isolated Digital I/O PC/104 Module
2-ch Counter/Timer with 24-ch Digital I/O PC/104 Module
32-ch Isolated Digital I/O PCI-104 Module
96-ch Digital I/O PCI-104 Module
8-ch Relay and 8-ch Isolated Digital Input PCI-104 Module
16-68
16-69
16-70
16-71
Data Acquisition and Control
Tutorial & Software
PC-based Data Acquisition (DAQ)
System Overview
Because industrial PC I/O interface products have become increasingly reliable, accurate,
and affordable in the last few years, PC-based data acquisition and control systems are
nowadays widely used in industrial and laboratory applications such as monitoring,
control, data acquisition and automated testing.
It requires know-how of electrical and computer engineering to select and build a data
acquisition (DAQ) and control system that actually does what you want. This tutorial
gives a brief introduction to what data acquisition and control systems do and how to
configure them. Here, we cover:
Transducers and Actuators
Signal Conditioning
Data Acquisition and Control Hardware
Getting Started
Signal Conditioning
Signal conditioning circuits improve the quality of signals generated by transducers before
they are converted into digital signals by the PC's data-acquisition hardware. Examples
of signal conditioning are signal scaling, amplification, linearization, cold-junction
compensation, filtering, attenuation, excitation, common-mode rejection, and so on.
One of the most common signal conditioning functions is amplification. For maximum
resolution, the voltage range of the input signals should be approximately equal to the
maximum input range of the A/D converter. Amplification expands the range of the
transducer signals so that they match the input range of the A/D converter. For example,
a x10 amplifier maps transducer signals that range from 0 to 1 V into the range 0 to 10
V before they go into the A/D converter.
Transducers and Actuators
A transducer converts temperature, pressure, level, length, position, etc. into voltage,
current, frequency, pulses or other signals.
Thermocouples, thermistors and resistance temperature detectors (RTDs) are common
transducers for temperature measurements. Other types of transducers include flow
sensors, pressure sensors, strain gauges, load cells and LVDTs, which measure flow
rate, pressure variances, force or displacement.
An actuator is a device that activates process control equipment by using pneumatic,
hydraulic or electrical power. For example, a valve actuator can open and close a valve
to control fluid rates.
Using digital I/O and SSRs to open and close a valve
The layout of a typical PC-based data acquisition system
16-2
Data Acquisition Boards
DAQ Tutorial & Software
Data Acquisition & Control Hardware
Data acquisition and control hardware generally performs one or more of the following
functions: analog input, analog output, digital input, digital output and counter/timer
functions. This section will discuss each function and list some considerations that are
important when you select a data acquisition and control system.
Getting Started
Advantech: The Source For What You Need
Advantech manufactures data acquisition hardware and software for measurement,
monitoring and applications control. The following guide is provided to help you choose Fanless Panel PCs
components for your data acquisition system.
Analog Inputs (A/D)
Analog to digital (A/D) conversion changes analog voltage or current levels into digital
information. The conversion is necessary to enable a computer to process or store the
signals.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Step 1: Know Your Fundamental Goal
Panel Computers
Decide whether your DAQ system will be used primarily for measurement, monitoring,
control, or analysis. Know the data requirements of your process, and know the number
of data collection points in your system. Know the required data collection speed, the Display Solutions
sampling rate, the type of measurement, the voltage or current being produced, the desired
accuracy and the output resolution at each data collection point. Finally, know the timing
of events in your system, and any special environmental conditions that exist.
Ethernet Switches
Step 2: Hardware Selection
Select the hardware required to achieve your fundamental goal. Advantech provides plug-in
boards for Analog-to-Digital, Digital-to-Analog, Digital I/O needs. Both ISA and PCI bus Device Servers
products are available. Your hardware selection should be based on five major criteria:
1. Number and types of channels
The most significant criteria when selecting A/D hardware are:
2. Differential or single-ended inputs
1. Number of input channels
3. Resolution
2. Single-ended or differential input signals
4. Speed
3. Sampling rate (in samples per second)
5. Software compatibility with hardware
4. Resolution (usually measured in bits of resolution)
Step 3: Accessory Selection
5. Input range (specified in full-scale volts)
Most applications require additional accessories which are available as separate items.
These include:
6. Noise and nonlinearity
1. Expansion peripherals to add channels to your system
Analog Outputs (D/A)
The opposite of analog to digital conversion is digital to analog (D/A) conversion. This
operation converts digital information into analog voltage or current. D/A devices allow
a computer to control real-world events.
2. Cables, signal conditioners and external boxes such as screw terminals or BNC
accessories
Step 4: Software Selection
More than any other single factor, software will determine your system start-up time, as
well as its effectiveness, suitability for your application, and ease of modification.
Three major criteria should determine the choice of software:
1. Operating system used
2. User programming expertise
3. Software compatibility with hardware
Serial Comm. Cards
Video Surveillance
Pre-Configured Systems
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
Analog output signals may directly control process equipment. The process can give
feedback in the form of analog input signals. This is referred to as a closed loop control
system with PID control. Analog outputs can also be used to generate waveforms. In this
case, the device behaves as a function generator.
IPC Peripherals
Digital Inputs and Outputs
DAQ
Digital input/output functions are useful in applications such as contact closure and switch
status monitoring, industrial On/Off control and digital communications.
Signal Conditioning
Counter/Timer
A counter/timer can be used for event counting, flowmeter monitoring, frequency counting,
pulse width measurement, time period measurement, and so on.
Online Download www.advantech.com/products
USB DAQ
16-3
ActiveDAQ Pro Introduction
What is ActiveDAQ Pro ?
ActiveDAQ Pro is a collection of ActiveX controls for performing I/O operations within any
compatible ActiveX control container, such as Visual Basic, Delphi, etc. You can easily
perform the I/O operations through properties, events and methods. With ActiveDAQ Pro,
you can perform versatile I/O operations to control your Advantech devices.
Intensity Control: It offers two-dimensional display and simple interpolation
for scattered 3D data points so that the user can conveniently check the intensity
variation trend of scattered 3D data points.
The ActiveDAQ Pro package contains the following components:
Advantech ActiveDAQ Pro Device Control: Enumerate all Advantech devices, direct
I/O operation.
Advantech ActiveDAQ Pro AI Control: Retrieve data from Advantech AI device.
Advantech ActiveDAQ Pro AO Control: Export data to Advantech AO device.
Advantech ActiveDAQ Pro Digital I/O Control: Digital I/O operation.
Advantech ActiveDAQ Pro Thermo Control: Retrieve temperature by thermocouple
measurement.
Advantech ActiveDAQ Pro Counter Control: Counter input signal.
Advantech ActiveDAQ Pro Pulse Control: Pulse signal output.
You can use these ActiveX controls in any development tool that supports them, including
Microsoft Visual C++, Microsoft Visual Basic, Borland C++ Builder, Borland Delphi and
Microsoft Visual Studio .NET.
What's New in ActiveDAQ Pro ?
In the latest version of the ActiveDAQ series: ActiveDAQ Pro, efforts have been made
to improve on the technical aspects and to provide a clear-cut mode of operation, as
explained in the following summary:
Graphic User Interface Control Components
Advantech ActiveDAQ Pro GUI control collection consists of abundant of graphic user
interface (GUI) control components, which enable users to conveniently and quickly build
graph display modules for data acquisition so as to supervise the changing status of the
object. ActiveDAQ Pro GUI control collection also helps users easily develop prototype
vision applications in an interactive environment without programming. These control
components include:
Button Control: It offers various display styles (2D and 3D) and is a Boolean
control that displays an on or off state (True or False).
Graph Control: This control provides abundant graph display functions, which
enable the user to display data of various sources simultaneously.
16-4
Data Acquisition Boards
Knob Control: It is a circular data controlling control that provides various graph
styles and can be used to display one or more values on the same interface.
LED Control: This control provides data display and editing functions with the
seven-segment nixie tube mode.
NumEditor Control: This control provides the user with the functions of data
displaying and editing. After the Formatstring has been chosen or defined by
the user, the values of the control will be adjusted automatically according to the
FormatString and displayed in the text edit box.
Slider Control: It is a linear data controlling control that provides various graph
styles. A Slider control can be used to set or display one or more values.
ActiveDAQ Pro Introduction
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Supports All Advantech DAQ Devices with High Speed Functions
Uses Optional Lists Instead of Direct Input
ActiveDAQ Pro now fully supports all Advantech DAQ cards and functions with complete
high speed data acquisition, including AI (analog input), AO (analog output), DI/O (digital
input/output) and counter cards. These high speed functions are preformed by interrupt
and DMA data transfer.
Now lists are provided with values which remain limited over various processes. This Operator Panels
option is much more convenient to input and will eliminate a large portion of the direct
data input.
Fanless Panel PCs
Default Settings for Immediate Execution
Easy-to-use Property Sheet Interface for Configuring Controls
The property page will offer selections which will give easy access to all settings and
eliminate unnecessary programming. Programming will only be required in specialized
situations.
Independent Operation of Controls
ActiveDAQ Pro offers total independent control operation, needing no support from other
existing controls.
Proper default settings have now been added to all methods and properties. That means
quicker execution for the user, which will offer a prompt response.
Panel Computers
Properties and Parameters are Chosen Automatically
When the user opts for some specific methods in ActiveDAQ Pro it can result automatically
Display Solutions
in appropriate properties and parameters. For example, ActiveDAQ Pro control can
automatically determine an appropriate data transferring method to perform the data
acquisition. (Software, interrupt and DMA transfer)
Ethernet Switches
Parameter Check-up and Correction
Each input parameter has to be within a certain range. As a result it has to have check-up
to ensure legitimacy. In most cases the user will be notified and in others there will be Device Servers
an automatic correction.
Better Defined Error Messages and Diagnostic Guide
ActiveDAQ Pro offers clear error messages description and diagnostic guides for all
return errors.
Supports All Widely Known Development Platforms
ActiveDAQ Pro support Microsoft Windows 2000 and Windows XP operation system.
Serial Comm. Cards
Video Surveillance
As with the previous version, ActiveDAQ 1.6x, it continues to support all widely known
Pre-Configured Systems
development platforms based on ActiveX technolygy. These platforms include Microsoft
Visual Basic, Visual C++, Visual Basic.Net, Visual C#, Borland C++ Builder and Delphi.
System Requirements
Uses Known Physical Properties
Physical properties like voltage, current and frequency can now be directly applied by the
user and will automatically be reassigned to the data needed by GainCode and sampling
rate. Making these changes has ensured that ActiveDAQ Pro has become much more
user friendly.
PC with at least a 266 MHz or higher microprocessor
Microsoft Windows 2000/ XP/ Vista
VGA compatible graphics card, supporting at least 256 colors
Minimum 64 MB of RAM
74 MB of free local hard disk space
One CD-ROM driver
Ordering Information
PCLS-ADPSTD
ActiveX Control-based Software for DAQ
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
Straightforward User Interface
The new version has become less-hardware dependent and it has relied more on intuition
during the user interface. During the redesigned process, the target was to decrease the
development difficulties. It has become easier for both entry level and advanced level
users to manage.
Online Download www.advantech.com/products
USB DAQ
16-5
Glossary
Accuracy
DI - Digital Input
Accuracy is the deviation of a measurement from a known standard. Accuracy is normally
specified in percent.
ADC - Analog-to-Digital Converter
A digital input card is used to determine whether an external device is on or off by sensing
the presence or absence of a voltage. The DI can only report ON/OFF status and not the
value of the voltage on each channel (sometimes called a bit). The bit is considered to
be ON if the voltage exceeds a certain value.
ADC is used to convert DC voltage from transducers into digital words (data). The voltage
representing a temperature, pressure, flow, pH, or speed and must converted to a digital
word before it can be passed to an intelligent device like a computer.
Digital cards usually feature 8, 16, or 32 channels. They can monitor a number of devices
at the same time. For example, a digital card can be attached to a single operator panel
to sense the position of switches on that panel.
Amplifier
Digital Filter
Amplifiers are used to boost the analog level (voltage) of the signal.
The digital filter function is used to eliminate glitches on input data and reduce the
number of changes to examine and process. The filter blocks pulses that are shorter than
the specified timing interval and passes pulses that are twice as long as the specified
interval. Intermediate-length pulses that are longer than half of the interval, but less than
the interval, may or may not pass the filter depending on your settings.
AO - Analog Output
The D/A converter performs the opposite function of an A/D converter. It interprets
commands from the computer and outputs the proper DC voltage or current. The output
stays at this output level until the computer tells the D/A converter to output a new value.
Auto Calibration
The built-in auto-calibration circuitry corrects gain and offset errors in analog input and
analog output channels thereby eliminating the need for external equipment and user
adjustments.
Automatic Channel/Gain/SD*/BU* Scanning
Advantech’s DAQ cards with this function feature an automatic channel/gain/SD/BU
scanning circuit. This circuit controls multiplexer switching during sampling in a way
that is more efficient than software implementation. Onboard SRAM stores different gain,
SD and BU values for each channel. This combination lets users perform multi-channel
high-speed sampling with different gain, SD and BU values for each channel.
*Note: SD: Single-Ended/Differential; BU: Bipolar/Unipolar
BoardID Switch
BoardID DIP switch helps defines each card’s unique identity when multiple identical PCI
cards have been installed in the same computer. The BoardID switch is very useful when
you build your system with multiple identical PCI cards. With the correct BoardID switch
settings, you can easily identify and access each card during hardware configuration and
software programming.
A method of transferring data from or to memory at a high rate without involving the
CPU. DMA is the hardware/software technique that allows the highest speed transfer of
data, to or from random memory (RAM) . Given the potentially more expensive hardware,
DMA can provide the means to read or write data at precise times without restricting
the microprocessor' tasks. For example, one system under DMA control can read or
write any combination of analog, digital or counter/timer data to or from RAM at rates
up to 360KB/second. This is accomplished without taking time from the other tasks of
the microprocessor. The amount of time required to respond to a DMA request is much
smaller than the one required to service an interrupt. This makes the goal of foreground/
background operation, at high speed, possible.
DO - Digital Output
The digital output card interprets a command from the computer and outputs a high or
low voltage on each of its channels (bits). It is commonly used to turn on/off small lights
or to send digital words to machinery.
FSR - Full Scale Range
FSR stands for the difference between the largest positive and negative voltages which a
AI channel can measure or a AO channel can output.
Gain - Magnitude Ratio
C/T - Counter/Timer
The counter card can be used to sense the presence or absence of a voltage, much like
digital input card. The counter is used to count the number of electronic pulses (totalize),
the duration of the pulse (pulse width), or the rate of pulses (frequency) coming out of
an external device.
For a linear system or element, the ratio of the magnitude (amplitude) of a steady-state
sinusoidal output relative to the causal input; the length of a phasor form the origin to a
point of the transfer locus in a complex plane.
GPIB - General Purpose Interface/Instrument Bus
A standard for IEEE-488 communication interface.
Channel-freeze
The channel-freeze function can be enabled either in dry contact or wet contact mode
(selected by the onboard jumper). When the channel-freeze function is enabled, the last
status of each digital output channel will be safely kept for emergency use. Moreover,
you can enable this function through software as it is useful in software simulation and
testing program.
Common Mode Noise
Common mode noise most often results when the ground potential between the measuring
instrument and the device being measured are different. The difference in grounds results
in a ground loop, a current flowing through ground and the low lead. Once this current
appears in the low lead wire it will cause a voltage because the wire has some resistance.
The longer the lead, the more lead resistance and greater the voltage error.
TIP : To reduce common mode noise, use a guarded voltmeter. Tie the guard to the low
side of the device being measured. This will shunt any ground loop currents away from
the high and low measurement wires.
16-6
DMA - Direct Memory Access
Data Acquisition Boards
Interrupt Data Transfer
Interrupts provide a mean of tightly controlling the timing of events, while allowing the
processing of more than one task. Multitasking systems are also known as “foreground/
background” systems. One way of putting data acquisition in the background is to relegate
it to an interrupt routine. The clock or external timing signal, rather than being polled
continuously, is used to generate an interrupt to the computer. Whenever the interrupt
occurs, the computer suspends current activity, and executes an “interrupt service routine”.
The interrupt service routine in this case might be a short program which acquires one
frame of data, and stores it in memory. The computer can perform other operations in
the foreground while collecting data in the background. Whenever a clock tick or external
interrupt occurs, the computer will automatically stop the foreground processing, acquire
the data, and then resume where it left off.
The reaction speed of the interrupt system is much higher than that of a polling loop.
Speed, for a PC, is about 10 kHz ~ 30 kHz in the interrupt mode.
Glossary
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Isolation Protection
Programmable Power-Up States
Isolation circuits are used to protect sensitive measurement circuitry from interference
currents or voltages. These circuits are useful when the external voltage (from a transducer)
is separeted from the measurement hardware.
With this function, all output lines are user-configurable for logic high or logic low when Operator Panels
the system is powering up. User-configurable power-up states are useful for ensuring that
the data acquisition card powers up in a known state. Power-up states are programmed
in the EEPROM through the driver. The default settings are all set to 0.
Fanless Panel PCs
Keeping The Output Values After System Reset
When the system is hot reset (power is not shut off), the Advantech’s DAQ cards with this
function can either retain the last digital (or analog) output values, or return to its default
configuration, depending on jumper setting. This practical function eliminates danger
caused by misoperation during unexpected system reset.
PWM - Pulse Width Modulation
LSB - Least Significant Bit
Pulse width modulation (PWM) technology is widely used for industrial applications such Panel Computers
as measurement, motor control, power control and so on. It offers a simple way for digital
control logic to create an analog equivalence. By using Advantech’s high-resolution counter
cards, the duty cycle of a square wave could be modulated to encode some specific analog
Display Solutions
signal levels so they can be used to control many electronic devices.
Onboard FIFO Memory
Resolution
FIFO is the abbreviation of “First-In, First-Out”. It functions as a “buffer” memory, which
plays an important role in the data acquisition device. You can either enable or disable
the interrupt request of the FIFO buffer. While the interrupt request for FIFO is enabled,
you can further specify whether the interrupt request will be sent whenever one sampling
takes place or when the FIFO buffer is half saturated. Advantech’s data acquisition cards
with onboard FIFO memory enables a continuous high-speed data transfer with more
predictable performance on Windows systems.
Resolution is the smallest change that a measurement instrument can sense. Resolution Ethernet Switches
is normally specified in bits.
Onboard Programmable Counter
S.E. Input - Single Ended Input
Device Servers
A single-ended configuration is the best when you need analog measurements against
respect to a common external ground. This configuration is also appropriate when there
is no practical way to bring both a signal ground and an analog ground (AGND) back to
Serial Comm. Cards
the system‘s input terminals.
Advantech’s multifunction cards provide a programmable counter to generate a pacer
trigger for the A/D conversion. The counter chip is an 82C54 or equivalent, which includes
three 16-bit counters on a 10 MHz clock. One counter is used as an event counter for
counting events coming from the input channels. The other two are cascaded together to
make a 32-bit timer for a pacer trigger.
Shielding
Optical Isolators
SPST Relay - Single-Pole Single-Throw Relay
Optical isolators are used with digital circuitry to shield high voltage signals from affecting
digital circuitry.
TTL - Transistor Transistor Logic
PCI Mastering Data Transfer
Watchdog Timer
Advantech’s high-speed DA & C cards support PCI-Bus mastering DMA for high-speed
data transfer and gap-free analog input and analog output. By setting aside a block of
memory in the PC, the DA&C cards performs bus-mastering data transfers without CPU
intervention, setting the CPU free to perform other more urgent tasks such as data analysis
and graphic manipulation. The function allows users to run all I/O functions simultaneously
at full speed without losing data.
The watchdog timer is a software-configurable feature used to set critical outputs to safe SBCs and Backplanes
states in the event of a software failure. It will activate if there is a loss of communication
between the application and the data acquisition card. If the card does not receive a
watchdog clear software command within the interval time specified for the watchdog Industrial Motherboards
timer, the outputs go to a user-defined safe state and remain in that state until the watchdog
timer is disabled and new values are written by the software.
Plug & Play Function
Advantech DAQ cards fully comply with the PCI spectication Rev 2.2 and thus are Plug
& Play devices. During card installation, it is virtually unnecessary to set any jumpers
or DIP switches. Instead, all bus-related configurations such as base I/O address and
interrupts are conveniently taken care of by the Plug & Play function.
An extra layer of conductive material surrounding a wire to prevent external electrical
signals from interfering with the signal on the wire.
Video Surveillance
SPDT Relay - Single-Pole Dual-Throw Relay
Pre-Configured Systems
IPC Chassis
After the watchdog timer expires, the card ignores any writes until the watchdog timer Embedded IPCs
is disabled. Users can set the watchdog timer timeout period through WDT register to
specify the amount of time that must elapse before the watchdog timer expires. The
counter on the watchdog timer is configurable up to (232-1) x 100 ns (approximately
Mobile Computers
seven minutes) before it expires.
Polling
IPC Peripherals
Polling is the simplest method for detecting a unique condition and then taking action. This
involves a software loop that contains all the required measurement, analysis, decisionmaking algorithms and planned actions. The data acquisition program periodically tests the
system’s clock or external trigger input to sense a transition. Whenever a transition occurs,
the program then samples each of the inputs and stores their values in a “frame”. A frame
is simply a list that contains the values representing the specified inputs at a given time.
The frames can be stored in RAM, disk or other types of memory. Each time the program
senses a clock “tick”, the inputs are scanned and converted, and a new frame is added to
memory. In this mode, generic computers can support an acquisition rate of about 10 kHz.
In addition, the PC is continuously busy when the polling loop is under operation,
and hence no other tasks can be serviced. When an application cannot tolerate these
characteristics, interrupt techniques may be needed.
Online Download www.advantech.com/products
DAQ
Signal Conditioning
USB DAQ
16-7
Analog I/O & Multifunction
Card Selection Guide
Category
Multifunction
Bus
PCI
Model
General
Spec.
Input
Ranges
PCI-1710U/UL
PCi-1710HGU
PCI-1711U/UL
PCI-1712/L
Resolution
12 bits
12 bits
12 bits
12 bits
PCI-1716/L
16 bits
Channels
16 SE/8 Diff.
16 SE/8 Diff.
16 SE
16 SE/8 Diff.
16 SE/8 Diff.
1,024 samples
Onboard FIFO
4,096 samples
4,096 samples
1,024 samples
1,024 samples
Sampling Rate
100 kS/s
100 kS/s
100 kS/s
1 MS/s
250 kS/s
Unipolar Inputs (V)
0 ~ 10, 0 ~ 5,
0 ~ 2.5, 0 ~ 1.25
0 ~ 10, 0 ~ 1,
0 ~ 0.1, 0 ~ 0.01
-
0 ~ 10, 0 ~ 5,
0 ~ 2.5, 0 ~ 1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5, 0 ~ 1.25
Bipolar Inputs (V)
±10, 5, 2.5, 1.25,
0.625
±10, 5, 1, 0.5, 0.1,
0.05, 0.01, 0.005
±10, 5, 2.5, 1.25,
0.625
±10, 5, 2.5, 1.25,
0.625
±10, 5, 2.5, 1.25,
0.625
Configurable
Per-Channel
Pacer/Software/
External Pulse
Analog Slope
-
-
-
-
Advanced Trigger
-
-
-
-
Software
Analog Input
Trigger
Mode
Data
Transfer
Mode
DMA
-
-
-
Bus-mastering
Bus-mastering
12 bits
12 bits
12 bits
12 bits
16 bits
Channels
2 (PCI-1710U only)
2
(PCI-1710HGU only)
2 (PCI-1711U only)
2 (PCI-1712 only)
2 (PCI-1716 only)
Onboard FIFO
-
-
-
32,768 samples
0 ~ 5, 0 ~ 10, ±5,
±10
Static update
Resolution
Analog Output
Digital I/O
Output Range (V)
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10, ±5,
±10
Output Rate
Static update
Static update
Static update
1 MS/s
DMA transfer
-
-
-
-
Input Channels
16
16
16
16
Output Channels
16
16
16
16
(shared)
Channels
1
1
1
3
1
Resolution
16 bits
16 bits
16 bits
16 bits
16 bits
Max. Input Frequency
10 MHz
Timer/Counter
10 MHz
10 MHz
10 MHz
10 MHz
Isolation Voltage
-
-
-
-
-
Auto Calibration
-
-
-
BoardID Switch
-
Dimensions (mm)
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
Connector
68-pin SCSI
68-pin SCSI
68-pin SCSI
68-pin SCSI
68-pin SCSI
Windows 2000/XP DLL Driver
Windows Vista DLL Driver
Windows 2000/XP SDK
Win CE 5.0/6.0 Driver
-
-
-
Linux Driver
ActiveDAQ/ActiveDAQ Pro
Labview I/O Drivers
KW IPC-33 Driver
-
-
Page
16-18
16-18
16-20
16-22
16-24
* All channels should be set to the same range.
** SS: Single DMA channel, Single A/D channel scan; SM: Single DMA channel, Multiple A/D channel scan
16-8
16
Data Acquisition Boards
Selection Guide
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Fanless Panel PCs
Panel Computers
Multifunction
PCI
ISA
PCI-1718HDU
PCI-1741U
PCI-1742U
PCL-711B
PCL-812PG
PCL-818L
PCL-818HD
PCL-818HG
12 bits
16 bits
16 bits
12 bits
12 bits
12 bits
12 bits
12 bits
16 SE/8 Diff.
16 SE/8 Diff.
16 SE/8 Diff.
8 SE
16 SE
16 SE/8 Diff
16 SE/8 Diff
16 SE/8 Diff
1,024 samples
1,024 samples
1,024 samples
-
-
-
1,024 samples
1,024 samples
100 kS/s
200 kS/s
1 MS/s
40 kS/s
30 kS/s
40 kS/s
100 kS/s
100 kS/s
0 ~ 10, 0 ~ 5,
0 ~ 2.5, 0 ~ 1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5, 0 ~ 1.25*
0 ~ 10, 0 ~ 5
0 ~ 2.5, 0 ~ 1.25
-
-
-
0 ~ 10, 0 ~ 5,
0 ~ 2.5, 0 ~ 1.25
0 ~ 10, 0 ~ 1,
0 ~ 0.1, 0 ~ 0.01
±10, 5, 2.5, 1.25,
0.625
±10, 5, 2.5, 1.25,
0.625*
±10, 5, 2.5,
1.25,0.625
±5, 2.5, 1.25,
0.625, 0.3125
±10, 5, 2.5,
1.25, 0.625,
0.3125
±10, 5, 2.5,
1.25, 0.625
±10, 5, 2.5,
1.25, 0.625
±10, 5, 1, 0.5,
0.1, 0.05, 0.01,
0.005
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Bus-mastering
-
SS**
SM**
SM**
SM**
12 bits
16 bits
16 bits
12 bits
12 bits
12 bits
12 bits
12 bits
1
1
2
1
2
1
1
1
-
-
-
-
-
-
-
-
0 ~ 5, 0 ~ 10
±5, ±10
0 ~ 5, 0 ~ 10, ±5,
±10
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10, ±10
0 ~ 5, 0 ~ 10, ±10
Static update
Static update
Static update
Static update
Static update
Static update
Static update
Static update
-
-
-
-
-
-
-
-
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
1
1
1
-
1
1
1
1
16 bits
16 bits
16 bits
-
16 bits
16 bits
16 bits
16 bits
10 MHz
10 MHz
10 MHz
-
2 MHz
10 MHz
10 MHz
10 MHz
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
175 x 100
175 x 100
175 x 100
175 x 100
185 x 100
155 x 100
185 x 100
185 x 100
DB37
68-pin SCSI
68-pin SCSI
3 x 20-pin
5 x 20-pin
DB37
DB37
DB37
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
16-26
16-28
16-28
16-30
16-31
16-32
16-32
16-32
Display Solutions
Ethernet Switches
Device Servers
Serial Comm. Cards
Video Surveillance
Pre-Configured Systems
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-9
Analog I/O & Multifunction
Card Selection Guide
Category
Multifunction
Bus
Model
PCM-3718H
General
Spec.
Input
Ranges
PCIE-1744
PCI-1713U
12 bits
12 bits
12 bits
12 bits
12 bits
12 bits
16 SE/8 Diff.
16 SE/8 Diff.
16 SE/8 Diff.
16 SE/8 Diff.
4 SE
32 SE/16 Diff.
4,096 samples
Onboard FIFO
-
-
1,024 samples
4,096 samples
32,768 samples
100 kS/s
100 kS/s
100 kS/s*
250 kS/s
30 MS/s
100 kS/s
Unipolar Inputs (V)
0 ~ 10, 0 ~ 5
0 ~ 2.5, 0 ~ 1.25
0 ~ 10, 0 ~ 1
0 ~ 0.1, 0 ~ 0.01
0 ~ 10, 0 ~ 5
0 ~ 2.5, 0 ~ 1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5, 0 ~ 1.25
-
0 ~ 10, 0 ~ 5,
0 ~ 2.5, 0 ~ 1.25
Bipolar Inputs (V)
±10, 5, 2.5,
1.25, 0.625
±10, 5, 1, 0.5,
0.1, 0.05, 0.01,
0.005
±10, 5, 2.5,
1.25, 0.625
±10, 5, 2.5, 1.25,
0.625
±5, 2.5, 1, 0.5
±10, 5, 2.5,
1.25, 0.625
Configurable
Per-Channel
Pacer/Software/
External Pulse
Analog Slope
-
-
-
-
-
Advanced Trigger
-
-
-
Software
DMA
SS**
SS**
SS**
-
Bus-mastering
-
Resolution
-
-
12 bits
12 bits
-
-
Channels
-
-
1
2
-
-
Onboard FIFO
-
-
-
-
-
-
Output Range (V)
-
-
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10,
±5, ±10
-
-
Output Rate
-
-
Static update
250 kS/s
-
-
DMA transfer
-
-
-
-
-
-
Input Channels
16
(shared)
16
(shared)
16
(shared)
16
(shared)
-
-
-
-
Output Channels
Channels
1
1
1
3
-
-
Resolution
16 bits
16 bits
16 bits
16 bits
-
-
Max. Input Frequency
10 MHz
10 MHz
10 MHz
10 MHz
-
-
Isolation Voltage
-
-
-
-
-
2,500 VDC
Auto Calibration
-
-
-
-
-
BoardID Switch
-
-
-
-
-
-
Dimensions (mm)
96 x 90
96 x 90
96 x 90
96 x 90
175 x 100
175 x 100
Connector
2 x 20-pin
2 x 20-pin
2 x 20-pin
50-pin/26-pin box
header
4 x BNC
DB37
Windows 2000/XP DLL Driver
Windows Vista DLL Driver
-
-
-
-
Windows 2000/XP SDK
Win CE 5.0/6.0 Driver
-
-
Linux Driver
-
-
ActiveDAQ/ActiveDAQ Pro
Labview I/O Drivers
KW IPC-33 Driver
-
-
-
-
-
-
Page
16-69
16-69
16-69
16-68
16-34
16-36
* 80 kHz on Pentium 4-based (or upper) system
** SS: Single DMA channel, Single A/D channel scan
16-10
PCI
PCM-3810I
Channels
Data
Transfer
Mode
Timer/
Counter
PCM-3718HO
PCIe
Sampling Rate
Trigger
Mode
Digital I/O
PCM-3718HG
PCI-104
Resolution
Analog Input
Analog
Output
Analog Input
PC/104
Data Acquisition Boards
Selection Guide
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Fanless Panel PCs
Panel Computers
Analog Input
Analog Output
ISA
PCI-104
PCI-1714U
PCI-1714UL
PCI
PCI-1715U
PCI-1747U
PCL-813B
PCM-3813I
PCI-1720U
PCI
PCI-1721
12 bits
12 bits
12 bits
16 bits
12 bits
12 bits
-
-
4 SE
4 SE
32 SE/16 Diff.
64 SE/32 Diff.
32 SE
32 SE/16 Diff.
-
-
32,768 samples
8,192 samples
1,024 samples
1,024 samples
-
1,024 samples
-
-
30 MS/s
10 MS/s
500 kS/s
250 kS/s
25 kS/s
100 kS/s
-
-
-
-
0 ~10, 0 ~ 5
0 ~ 2.5, 0 ~1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5, 0 ~ 1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5, 0 ~ 1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5, 0 ~ 1.25
-
-
±5, 2.5, 1, 0.5
±5, 2.5, 1, 0.5
±10, 5, 2.5, 1.25,
0.625
±10, 5, 2.5, 1.25,
0.625
±5, 2.5, 1.25,
0.625
±5, 2.5, 1.25,
0.625
-
-
-
-
Pacer/Software
Software
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Display Solutions
Ethernet Switches
Device Servers
-
Bus-mastering
Bus-mastering
Bus-mastering
Bus-mastering
-
-
-
-
-
-
-
-
-
-
12 bits
12 bits
-
-
-
-
-
-
4
4
(Waveform
Output)
-
-
-
-
-
-
-
1,024 samples
-
-
-
-
-
-
0 ~ 5, 0 ~ 10,
±5, ±10,
0 ~ 20 mA,
4 ~ 20 mA
0 ~ 5, 0 ~ 10,
±5, ±10,
0 ~ 20 mA,
4 ~ 20 mA
-
-
-
-
-
-
Static update
10 MS/s
-
-
-
-
-
-
-
Bus-mastering
-
-
-
-
-
-
-
-
-
-
-
-
-
-
16
(shared)
-
-
-
-
-
-
-
1
-
-
-
-
-
-
-
16 bits
10 MHz
-
-
-
-
-
-
-
-
-
2,500 VDC
-
500 VDC
2,500 VDC
2,500 VDC
-
-
-
-
-
-
-
175 x 100
175 x 100
175 x 100
175 x 100
219 x 100
96 x 90
175 x 100
175 x 100
4 x BNC
4 x BNC
DB37
68-pin SCSI
DB37
40-pin
DB37
68-pin SCSI
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
16-35
16-35
16-37
16-38
16-39
16-68
16-40
16-41
Online Download www.advantech.com/products
Serial Comm. Cards
Video Surveillance
Pre-Configured Systems
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
16-11
Analog I/O & Multifunction
Card Selection Guide
Category
Analog Output
Bus
PCI
Model
General
Spec.
PCI-1724U
PCI-1727U
PCL-726
PCL-727
Resolution
-
-
-
-
-
-
Channels
-
-
-
-
-
-
Onboard FIFO
-
-
-
-
-
-
-
-
-
-
-
-
Unipolar Inputs
(V)
-
-
-
-
-
-
Bipolar Inputs
(V)
-
-
-
-
-
-
Configurable
Per-Channel
-
-
-
-
-
-
Pacer/Software/
External Pulse
-
-
-
-
-
-
Analog
Input
Trigger
Mode
Analog Slope
-
-
-
-
-
-
Advanced
Trigger
-
-
-
-
-
-
Data
Transfer
Mode
Digital I/O
Timer/
Counter
16-12
PCL-728
Sampling Rate
Input
Ranges
Analog
Output
ISA
PCI-1723
Software
-
-
-
-
-
DMA
-
-
-
-
-
-
Resolution
16 bits
14 bits
14 bits
12 bits
12 bits
12 bits
Channels
8
32
32
6
12
2
Onboard FIFO
-
-
-
-
-
-
Output Range (V)
±10, 0 ~ 20 mA,
4 ~ 20 mA
±10, 0 ~ 20 mA
±10, 0~20 mA
0 ~ 5, 0 ~ 10,
±5, ±10,
4 ~ 20 mA
0 ~ 5, 0 ~ 10, ±5,
4 ~ 20 mA
0 ~ 5, 0 ~ 10,
±5, ±10,
0 ~ 20 mA,
4 ~ 20 mA
Static update
Output Rate
Static update
Static update
Static update
Static update
Static update
DMA transfer
-
-
-
-
-
-
Input Channels
-
16
16
16
-
Output Channels
16
(shared)
-
16
16
16
-
Channels
-
-
-
-
-
-
Resolution
-
-
-
-
-
-
Max. Input Frequency
-
-
-
-
-
-
Isolation Voltage
-
1,500 VDC
-
-
-
500 VDC
Auto Calibration
-
-
-
-
-
BoardID Switch
-
-
-
Dimensions (mm)
175 x 100
175 x 100
175 x 100
337 x 112
337 x 112
185 x 120
Connector
68-pin
SCSI
DB62
2 x 2-pin, DB37
4 x 20-pin
2 x 20-pin, DB37
2 x DB9
Windows 2000/XP DLL Driver
Windows Vista DLL Driver
-
-
-
Windows 2000/XP SDK
Win CE 5.0/6.0 Driver
-
-
-
-
-
Linux Driver
-
ActiveDAQ/ActiveDAQ Pro
Labview I/O Drivers
KW IPC-33 Driver
-
-
-
-
-
-
Page
16-42
16-43
16-44
16-46
16-45
16-46
Data Acquisition Boards
Digital I/O & Counter Card
Selection Guide
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Fanless Panel PCs
Panel Computers
Category
Non-Isolated Digital I/O
Bus
PCI
Model
PCI-1735U
PCI-1737U
PCI-1739U
PCI-1751
PCI-1753
PCI-1755
PCI-1757UP
Input Channels
32
Output Channels
32
24
(shared)
48
(shared)
48
(shared)
96
(shared)
32
(shared)
24
(shared)
Sink
Current
24 mA @ 0.5V
24 mA @ 0.4 V
24 mA @ 0.4 V
24 mA @ 0.4 V
24 mA @ 0.44 V
24 mA @ 0.5V
24 mA @ 0.5 V
Source
Current
15 mA @ 2.0V
15 mA @ 2.4 V
15 mA @ 2.4 V
15 mA @ 2.4 V
24 mA @ 3.76 V
15 mA @ 2.0V
24 mA @ 3.7 V
Channels
-
-
-
-
-
-
-
Isolation
Voltage
-
-
-
-
-
-
-
Input Range
-
-
-
-
-
-
-
Channels
-
-
-
-
-
-
-
Isolation
Voltage
-
-
-
-
-
-
-
Output
Range
-
-
-
-
-
-
-
-
-
-
-
-
-
-
3
-
-
3
-
3
-
TTL DI/O
Output
Channel
Input
Isolated
DI/O
Output
Max. Sink
Current
Channels
Timer/
Counter
Advanced
Function
Display Solutions
Ethernet Switches
Device Servers
Serial Comm. Cards
Video Surveillance
Pre-Configured Systems
Resolution
16 bits
-
-
16 bits
-
16 bits
-
Max. Input Frequency
10 MHz
-
-
10 MHz
-
10 MHz
-
Pattern Match
-
-
-
-
-
Change of State
-
-
-
-
-
BoardID Switch
Channel-Freeze
Function
-
-
-
-
-
-
Output Status Read
Back
-
Dry/Wet Contact*
-
-
Dimensions (mm)
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
120 x 65
Connector
5 x 20-pin
1 x 50-pin
2 x 50-pin
68-pin SCSI
100-pin SCSI
100-pin SCSI-II
1 x DB25
Windows 2000/XP DLL Driver
Windows Vista DLL Driver
Windows 2000/XP SDK
Win CE 5.0/6.0 Driver
-
-
-
-
-
Linux Driver
-
-
-
ActiveDAQ/ActiveDAQ Pro
-
Labview I/O Drivers
-
KW Win33 Driver
-
-
-
-
-
-
-
Page
16-47
16-48
16-48
16-49
16-50
16-51
16-52
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
* Dry/wet contact can be mixed at the same time within one group.
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-13
Digital I/O & Counter Card
Selection Guide
Category
Non-Isolated Digital I/O
Bus
ISA
PC/104
PCI-104
PCL-720+
PCL-722
PCL-724
PCL-731
PCM-3724
PCM-3753I
Input Channels
32
Output Channels
32
144
(shared)
24 (shared)
48 (shared)
48 (shared)
96 (shared)
Model
TTL DI/O
Output
Channel
Sink Current
24 mA @ 0.5 V
24 mA @ 0.5 V
24 mA @ 0.4 V
24 mA @ 0.4 V
24 mA @ 0.5 V
24 mA @ 0.4 V
Source Current
15 mA @ 2.0 V
15 mA @ 2.4 V
15 mA @ 2.4 V
15 mA @ 2.4 V
15 mA @ 2.0 V
15 mA @ 2.4 V
Channels
-
-
-
-
-
-
Input
Isolation Voltage
-
-
-
-
-
-
Input Range
-
-
-
-
-
-
Channels
-
-
-
-
-
-
Isolation Voltage
-
-
-
-
-
-
Output Range
-
-
-
-
-
-
Isolated
DI/O
Output
Max. Sink
Current
Timer/
Counter
Advanced
Function
-
-
-
-
-
Channels
3
-
-
-
-
-
Resolution
16 bits
-
-
-
-
-
Max. Input Frequency
1 MHz
-
-
-
-
-
Pattern Match
-
-
-
-
-
Change of State
-
-
-
-
-
BoardID Switch
-
-
-
-
-
-
Channel-Freeze Function
-
-
-
-
-
-
Output Status Read Back
-
Dry/Wet Contact*
-
-
-
-
-
-
Dimensions (mm)
185 x 100
334 x 100
125 x 100
185 x 100
96 x 90
96 x 90
Connector
5 X 20-pin
6 x 50-pin
1 x 50-pin
2 x 50-pin
2 x 50-pin
4 x 50-pin
Windows 2000/XP DLL Driver
Windows Vista DLL Driver
-
-
-
-
-
-
Windows 2000/XP SDK
Win CE 5.0/6.0 Driver
-
-
-
-
Linux Driver
-
-
-
-
ActiveDAQ/ActiveDAQ Pro
Labview I/O Drivers
KW Win33 Driver
-
-
-
-
-
-
Page
16-53
16-54
16-55
16-55
16-69
16-71
* Dry/wet contact can be mixed at the same time within one group.
16-14
Data Acquisition Boards
Selection Guide
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Fanless Panel PCs
Panel Computers
Isolated Digital I/O
PCI
PCI-1730U
PCI-1733
PCI-1734
PCI-1750
PCI-1752U
PCI-1754
PCI-1756
16
-
-
-
-
-
-
16
-
-
-
-
-
-
24 mA @ 0.5 V
-
-
-
-
-
-
15 mA @ 2.4 V
-
-
-
-
16 (Sink)
32 (Sink)
-
16 (Sink)
-
64 (Sink)
32 (Sink)
2,500 VDC
2,500 VDC
-
2,500 VDC
-
2,500 VDC
2,500 VDC
5 ~ 30 VDC
5 ~ 30 VDC
-
5 ~ 50 VDC
-
10 ~ 50 VDC
10 ~ 50 VDC
16 (Sink)
-
32 (Sink)
16 (Sink)
64 (Sink)
-
32 (Sink)
2,500 VDC
-
2,500 VDC
2,500 VDC
2,500 VDC
-
2,500 VDC
5 ~ 40 VDC
-
5 ~ 40 VDC
5 ~ 40 VDC
5 ~ 40 VDC
-
5 ~ 40 VDC
200 mA
-
200 mA
200 mA
200 mA
-
200 mA
-
-
-
1
-
-
-
-
-
-
16 bits
-
-
-
-
-
-
1 MHz
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
1 x DB37
4 x 20-pin
1 x DB37
1 x DB37
1 x DB37
100-pin SCSI
100-pin SCSI
100-pin SCSI
-
-
-
-
16-56
16-56
16-56
16-57
16-58
16-58
16-58
Display Solutions
Ethernet Switches
Device Servers
Serial Comm. Cards
Video Surveillance
Pre-Configured Systems
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-15
Digital I/O & Counter Card
Selection Guide
Category
Isolated Digital I/O
Bus
PCI
Model
TTL DI/O
PCI-1758UDI
PCI-1758UDO
PCI-1758UDIO
PCI-1760U
PCI-1761
Input Channels
-
-
-
-
-
-
Output Channels
-
-
-
-
-
-
Output
Channel
Sink Current
-
-
-
-
-
-
Source Current
-
-
-
-
-
-
Channels
128
-
64
8 (Sink)
8 (Sink)
16 (Sink)
Input
Isolation Voltage
2,500 VRMS
-
2,500 VDC
2,500 VDC
3,750 VDC
2,500 VDC
Input Range
5 ~ 25 VDC
-
5 ~ 25 VDC
4.5 ~ 12 VDC
5 ~ 50 VDC
10 ~ 50 VDC
4 x Form A
4 x Form C
16**
Channels
-
128
64
6 x Form A
2 x Form C
Isolation Voltage
-
2,500 VRMS
2,500 VDC
2,500 VDC
2,500 VDC
2,500 VDC
Output Range
-
5 ~ 40 VDC
5 ~ 40 VDC
Max. Sink
Current
-
90 mA
90 mA
0.5A @ 120 VAC
1A @ 30 VDC
3A @ 250 VAC
3A @ 24 VDC
0.5A @ 120 VAC
1A @ 30 VDC
Channels
-
-
-
Up CTR for DI
2 x PWM
-
-
Resolution
-
-
-
16 bits
(2,500 Isolation)
-
-
-
500 Hz for Up
CTR
-
-
Isolated
DI/O
Output
Timer/
Counter
Max. Input Frequency
-
-
Pattern Match
-
-
-
-
-
Change of State
-
-
-
-
-
BoardID Switch
Channel-Freeze Function
-
-
-
-
-
Output Status Read Back
-
Dry/Wet Contact*
-
-
-
-
-
-
Dimensions (mm)
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
Connector
Dual 100-pin
mini-SCSI
Dual 100-pin
mini-SCSI
Dual 100-pin
mini-SCSI
1 x DB37
1 x DB37
1 x DB62
Windows 2000/XP DLL Driver
Windows Vista DLL Driver
Windows 2000/XP SDK
Win CE 5.0/6.0 Driver
-
-
Linux Driver
ActiveDAQ/ActiveDAQ Pro
Labview I/O Drivers
KW Win33 Driver
-
Page
16-59
16-59
16-59
16-60
16-61
16-62
Advanced
Function
* Dry/wet contact can be mixed at the same time within one group.
** Jumper selectable Form A/Form B-type relay output
16-16
PCI-1762
Data Acquisition Boards
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Fanless Panel PCs
Panel Computers
Isolated Digital I/O
ISA
Counter
PCI
ISA
PC/104
PCL-725
PCL-735
PCM-3725
PC/104
PCM-3730
PCM-3730I
PCI-104
PCM-3761I
PCI-1780U
PCL-836
PCM-3780
-
-
8
16
-
-
8
16
-
-
8
16
-
-
8
16
24
(shared)
-
-
-
0.5 V @ 8 mA
-
-
24 mA @ 0.5 V
8 mA @ 0.5 V
24 mA @ 0.5 V
-
-
-
0.4 mA @ 2.4 V
-
-
15 mA @ 2.4 V
0.4 mA @ 2.4 V
15 mA @ 2.0 V
8 (Sink)
-
8
8
16
8
-
-
-
1,500 VDC
-
2,500 VDC
2,500 VDC
2,500 VDC
2,500 VDC
-
-
-
5 ~ 24 VDC
-
10 ~ 50 VDC
5 ~ 24 VDC
5 ~ 30 VDC
5 ~ 30 VDC
-
-
-
4 x Form A
4 x Form C
12 x Form C
8 x Form C
8
16
8 x Form C
-
-
-
1,000 VDC
1,000 VDC
2,000 VDC
2,500 VDC
2,500 VDC
2,000 VDC
-
-
-
0.5A @ 120 VAC
1A @ 30 VDC
1A @ 125 VAC
2A @ 30 VDC
0.25A @ 240 VDC
1A @ 30 VDC
5 ~ 40 VDC
5 ~ 30 VDC
-
-
-
200 mA
350 mA
-
-
2
0.25 A @ 240 VAC
1 A @ 30 VDC
-
-
-
-
-
-
8 x CTR
6 x CTR
3 x PWM
-
-
-
-
-
-
16 bits
16 bits
16 bits
-
-
-
-
-
-
20 MHz
10 MHz
20 MHz
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
147 x 95
155 x 100
96 x 90
96 x 90
96 x 90
96 x 90
175 x 100
185 x 100
96 x 90
1 x DB37
1 x DB37
1 x 20-pin
1 x 50-pin
3 x 20-pin
2 x 20-pin
1 x 20-pin
1 x 50-pin
68-pin SCSI
1 x DB37
2 x 20-pin
1 x 50-pin
1 x 20-pin
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
16-63
16-64
16-70
16-70
16-71
16-71
16-65
16-66
16-70
Display Solutions
Ethernet Switches
Device Servers
Serial Comm. Cards
Video Surveillance
Pre-Configured Systems
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-17
PCI-1710U/UL
PCI-1710HGU
100 kS/s, 12-bit, 16-ch Universal PCI
Multifunction Card
100 kS/s, 12-bit, 16-ch Universal PCI
Multifunction Card with High Gain
Features
16-ch single-ended or 8-ch differential or a combination of analog input
12-bit A/D converter, with up to 100 kHz sampling rate
Programmable gain
Automatic channel/gain scanning
Onboard FIFO memory (4,096 samples)
Two 12-bit analog output channels (PCI-1710U/HGU only)
16-ch digital input and 16-ch digital output
Onboard programmable counter
BoardID™ switch
5R+6
COMPLIANT
Introduction
The PCI-1710U series are multifunction cards for the PCI bus. Their advanced circuit design provides higher quality and more functions, including the five most desired measurement
and control functions: 12-bit A/D conversion, D/A conversion, digital input, digital output, and counter/timer.
Specifications
Analog Input
Analog Output (PCI-1710U/HGU only)
Channels
Resolution
FIFO Size
Overvoltage Protection
Input Impedance
Sampling Modes
Input Range
PCI-1710U/UL
Gain
Bipolar
Unipolar
Accuracy
(% of FSR ±1LSB)
PCI-1710HGU
Gain
Bipolar
Unipolar
Accuracy
(% of FSR ±1LSB)
16 single-ended/ 8 differential (software programmable)
12 bits
4,096 samples
30Vp-p
1 GΩ
Software, onboard programmable pacer and external
(V, software programmable)
0.5
±10
N/A
1
±5
0 ~ 10
2
±2.5
0~5
4
±1.25
0 ~ 2.5
8
±0.625
0 ~ 1.25
0.1
0.1
0.2
0.2
0.4
PCI-1710HGU
Channels
Resolution
Output Rate
Output Range
Internal Reference
2
12 bits
Static update
(V, software programmable)
Unipolar
External Reference
Slew Rate
Driving Capability
Operation Mode
Accuracy
10 V/μs
3 mA
Software polling
INLE: ±1 LSB, DNLE: ±1 LSB
0.5
±10
N/A
1
±5
0 ~ 10
5
±1
N/A
10
±0.5
0~1
50
±0.1
N/A
100
±0.05
0 ~ 0.1
500
±0.01
N/A
1000
±0.005
0 ~ 0.01
0.1
0.1
0.2
0.2
0.4
0.4
0.8
0.8
(S/s, depending on PGIA setting time)
Gain
0.5, 1, 2, 4, 8
0.5, 1
5, 10
20, 100
500, 1000
Max. Sampling Rate
100 kS/s
100 kS/s
35 kS/s
7 kS/s
770 S/s
Channels
Compatibility
Input Voltage
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
Channels
Compatibility
Output Voltage
Output Capability
16
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 8.0 mA @ 0.8 V
Source: -0.4 mA @ 2.0 V
Pacer/Counter
16-18
0~5
0 ~ 10
0 ~ +x V @ -x V (-10 ≤ x ≤ 10)
Digital Input
Maximum Sampling Rate
Model
PCI-1710U/UL
Data Acquisition Boards
Channels
Resolution
Compatibility
Max. Input Frequency
1
16 bits
5 V/TTL
1 MHz
PCI-1710U/UL
PCI-1710HGU
Pin Assignments
Specifications Continued
General
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA
Max.: 5 V @ 1.0 A
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
Ordering Information
PCI-1710U
PCI-1710UL
PCI-1710HGU
PCLD-8710
PCL-10168-1
PCL-10168-2
ADAM-3968
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
100 kS/s, 12-bit Multifunction Card
100 kS/s, 12-bit Multifunction Card w/o AO
100 kS/s, 12-bit High-gain Multifunction Card
DIN-rail Wiring Board w/ CJC
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
Device Servers
Serial Comm. Cards
Video Surveillance
Pre-Configured Systems
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-19
PCI-1711U/UL
Entry-level 100 kS/s, 12-bit, 16-ch
Universal PCI Multifunction Card
Features
16-ch single-ended analog input
12-bit A/D converter, with up to 100 kHz sampling rate
Programmable gain
Automatic channel/gain scanning
Onboard FIFO memory (1,024 samples)
Two 12-bit analog output channels (PCI-1711U only)
16-ch digital input and 16-ch digital output
Onboard programmable counter
5R+6
COMPLIANT
Introduction
PCI-1711U and PCI-1711UL are powerful, but low-cost multifunction cards for the PCI bus. PCI-1711U comes with 2 analog output channels, while the PCI-1711UL doesn’t. Thus,
PCI-1711UL represents a cost saver for those that do not need analog output.
Specifications
Analog Input
Digital Output
Channels
Resolution
Max. Sampling Rate
FIFO Size
Overvoltage Protection
Input Impedance
Sampling Modes
Input Range
Bipolar
Accuracy (% of FSR ±1LSB)
16 single-ended
12 bits
100 kS/s
1,024 samples
30 Vp-p
2 MΩ/5 pF
Software, onboard programmable pacer, or external
(V, software programmable)
± 10
0.1
±5
0.1
± 2.5
0.2
± 1.25
0.2
± 0.625
0.4
Analog Output (PCI-1711U only)
Channels
Resolution
Output Rate
Output Range
Internal Reference
External Reference
Slew Rate
Driving Capability
Output Impedance
Operation Mode
Accuracy
2
12 bits
Static update
(V, software programmable)
Unipolar
0 ~ 5, 0 ~ 10
0 ~ +x V @ -x V (-10 ≤ x ≤ 10)
11 V/μs
3 mA
0.81 W
Software polling
INLE: ±1 LSB
DNLE: ±1 LSB
Digital Input
Channels
Compatibility
Input Voltage
16-20
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Data Acquisition Boards
Channels
Compatibility
Output Voltage
Output Capability
16
5 V/TTL
Logic 0: 0.8 V
Logic 1: 2.0 V
Sink: 8.0 mA @ 0.8 V
Source: -0.4 mA @ 2.0 V
Pacer/Counter
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
1
16 bits
5 V/TTL
10 MHz
Internal: 10 MHz
General
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
PCI-1711U
Universal PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA
Max.: 5 V @ 1.0 A
PCI-1711UL
Typical: 5 V @ 700 mA
Max.: 5 V @ 1.0 A
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
PCI-1711U/UL
Ordering Information
PCI-1711U
PCI-1711UL
PCLD-8710
PCL-10168-1
PCL-10168-2
ADAM-3968
Pin Assignments
Entry-level 100 kS/s, 12-bit Multifunction Card
Entry-level 100 kS/s, 12-bit Multi. Card w/o AO
DIN-rail Wiring Board w/ CJC
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
Serial Comm. Cards
Video Surveillance
Pre-Configured Systems
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-21
PCI-1712/L
1 MS/s, 12-bit, 16-ch PCI
Multifunction Card
Features
16 single-ended or 8 differential or a combination of analog inputs
12-bit A/D converter, with up to 1 MHz sampling rate
Programmable gain
Automatic channel/gain scanning
Onboard FIFO memory (AI: 1,024 samples AO: 32,768 samples)
Two 12-bit analog output channels with continuous waveform output function
(PCI-1712 only)
16-ch digital input and 16-ch digital output
Three 16-bit programmable multifunction counter/timers on 10 MHz
Auto-calibration (AI/AO)
PCI-Bus mastering data transfer
Pre-, post-, about- and delay-trigger data acquisition modes for analog input
channels
Flexible triggering and clocking capabilities
5R+6
COMPLIANT
Introduction
PCI-1712 and PCI-1712L are powerful high-speed multifunction cards for the PCI bus. They feature a 1 MHz 12-bit A/D converter, an onboard FIFO buffer (storing up to 1024 samples
for A/D, and up to 32,768 samples for D/A conversion). The PCI-1712 cards provide a total of up to 16 single-ended or 8 differential A/D input channels or a mixed combination,
two 12-bit D/A output channels, 16 digital input/output channels, and three 10 MHz 16-bit multifunction counter channels. PCI-1712L is a low-cost version without analog output.
Specifications
Analog Input
Digital Input
Channels
Resolution
Max. Sampling Rate
Channels
Compatibility
Input Voltage
Digital Output
16 single-ended/ 8 differential (software programmable)
12 bits
Multi-channel, single gain: 1 MS/s
Multi-channel, multi gain: 600 kS/s
Multi-channel, multi gain, unipolar/bipolar: 400 kS/s
FIFO Size
1,024 samples
Overvoltage Protection 30 Vp-p
Input Impedance
100 MW/10 pF (Off), 100 MW/100 pF (On)
Sampling Modes
Software, onboard programmable pacer and external
Trigger Modes
Pre-trigger, post-trigger, delay-trigger and about-trigger
Input Range
(V, software programmable)
Unipolar
Bipolar
Accuracy (% of FSR ±1LSB)
N/A
±10
0.1
0 ~ 10
±5
0.1
0~5
±2.5
0.2
0 ~ 2.5
±1.25
0.2
0 ~ 1.25
±0.625
0.4
Analog Output (PCI-1712 only)
Channels
Resolution
Output Rate
FIFO Size
Output Range
Internal Reference
External Reference
Slew Rate
Driving Capability
Output Impedance
Operation Mode
Accuracy
16-22
2
12 bits
1 MS/s
32,768 samples
(V, software programmable)
Bipolar
Unipolar
±5, ±10
0 ~ 5, 0 ~ 10
0 ~ +x V @ +x V (-10 ≤ x ≤ 10)
-x ~ +x V @ +x V (-10 ≤ x ≤ 10)
20 V/μs
10 mA
0.1 W max.
Software polling, continuous output and waveform
output
INLE: ±1 LSB
DNLE: ±1 LSB (monotonic)
Data Acquisition Boards
Channels
Compatibility
Output Voltage
Output Capability
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 8.0 mA @ 0.8 V
Source: -0.4 mA @ 2.0 V
Pacer/Counter
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
3
16 bits
5 V/TTL
10 MHz
Internal: 10 MHz, 1 MHz, 100 kHz, 10 kHz
External Frequency: 10 MHz max.
General
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
PCI V 2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1.0 A, 12 V @ 700 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storage Temperature -20 ~ 85° C (-4 ~ 185° F)
Storage Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
PCI-1712/L
Ordering Information
PCI-1712
PCI-1712L
PCLD-8712
PCL-10168-1
PCL-10168-2
ADAM-3968
Pin Assignments
1 MS/s, 12-bit High-speed Multifunction PCI Card
1 MS/s, 12-bit High-speed Multi. PCI Card w/o AO
DIN-rail Wiring Board for PCI-1712/L
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
Serial Comm. Cards
Video Surveillance
Pre-Configured Systems
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-23
PCI-1716/L
250 kS/s, 16-bit, 16-ch PCI
Multifunction Card
Features
16 single-ended or 8 differential or a combination of analog inputs
16-bit A/D converter, with up to 250 kHz sampling rate
Onboard FIFO memory (1,024 samples)
Auto-calibration
PCI-Bus mastering data transfer
2 analog output channels (PCI-1716 only)
16-ch digital input and 16-ch digital output
Onboard programmable counter
BoardID™ switch
5R+6
COMPLIANT
Introduction
PCI-1716 and PCI-1716L are powerful high-resolution multifunction cards for the PCI bus. They feature a 250 kS/s 16-bit A/D converter, and an onboard 1,024-sample FIFO buffer
for A/D. The cards have up to 16 single-ended or 8 differential A/D input channels or a combination of these; two 16-bit D/A output channels, 16 digital input/output channels, and
one 10 MHz 16-bit counter channel. PCI-1716 and PCI-1716L provide specific functions for different user requirements.
Specifications
Analog Input
Digital Input
Channels
Channels
Compatibility
Input Voltage
16 single-ended/ 8 differential (software
programmable)
Resolution
16 bits
Max. Sampling Rate
250 kS/s
FIFO Size
1,024 samples
Overvoltage Protection 30 Vp-p
Input Impedance
100 MΩ/10 pF (off), 100 MΩ/100 pF (on)
Sampling Modes
Software, onboard programmable pacer and external
Input Range
(V, software programmable)
Unipolar
Bipolar
Accuracy (% of FSR ±1LSB)
N/A
±10
0.05
0 ~ 10
±5
0.03
0~5
±2.5
0.03
0 ~ 2.5
±1.25
0.05
Channels
Resolution
Output Rate
Output Range
Internal Reference
External Reference
16-24
Slew Rate
Driving Capability
Output Impedance
Operation Mode
Accuracy
2
16 bits
Static update
(V, software programmable)
Unipolar
Bipolar
Digital Output
Channels
Compatibility
Output Voltage
Output Capability
16
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 0.8 mA @ 0.8 V
Source: -2.4 mA @ 2.0 V
Pacer/Counter
Analog Output (PCI-1716 only)
0 ~ 1.25
±0.625
0.1
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
0 ~ 5 , 0 ~ 10
±5, ±10
0 ~ +x V @ +x V (-10 ≤ x ≤ 10)
-x ~ +x V @ +x V (-10 ≤ x ≤ 10)
20 V/μs
20 mA
0.1 W max.
Software polling
INLE: ±1 LSB
Data Acquisition Boards
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
1
16 bits
5 V/TTL
1 MHz
Internal: 10 MHz
External Clock Frequency: 10 MHz max.
General
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1 A, 12 V @ 700 mA
Operating Temperature 0 ~ 70° C (32 ~ 158° F) (refer to IEC 68-2-1, 2)
Storage Temperature -20 ~ 85° C (-4 ~ 185° F)
Operating Humidity
5 ~ 85% RH non-condensing(refer to IEC 68-1, -2, -3)
Storage Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-1, -2, -3)
PCI-1716/L
Ordering Information
PCI-1716
PCI-1716L
PCLD-8710
PCL-10168-1
PCL-10168-2
ADAM-3968
Pin Assignments
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
250 kS/s, 16-bit High-resolution Multi. Card
250 kS/s, 16-bit High-res. Multi. Card w/o AO
DIN-rail Wiring Board w/ CJC
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
Serial Comm. Cards
Video Surveillance
Pre-Configured Systems
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
PCI-1716L
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-25
PCI-1718HDU
100 kS/s, 12-bit, 16-ch Universal PCI
Multifunction Card
Features
ISA-Compatible with PCL-818HD
16-ch single-ended or 8-ch differential analog input
12-bit A/D converter, with up to 100 kHz sampling rate
Programmable gain
Automatic channel/gain scanning
Onboard FIFO memory (1,024 samples)
One 12-bit analog output channel
16-ch digital input and 16-ch digital output
Universal PCI bus (support 3.3 V or 5 V PCI bus signal)
BoardID™ switch
5R+6
COMPLIANT
Introduction
The PCI-1718HDU and the PCL-818H series are 100 kS/s multifunction data acquisition cards that offer the five most desired measurement and control functions: 12-bit A/D conversion,
12-bit D/A conversion, digital input, digital output, and counter/timer. With 3-way compatibility, migration is possible from ISA bus to PCI bus.
Specifications
Analog Input
Digital Input
Channels
Resolution
Max. Sampling Rate
FIFO Size
Overvoltage Protection
Input Impedance
Sampling Modes
Input Range
PCI-1718HDU
16 single-ended/8 differential (software programmable)
12 bits
100 kS/s
1,024 samples
30 Vp-p
100 MΩ
Software, onboard or external programmable pacer
Unipolar
Bipolar
Accuracy
(% of FSR
±1LSB)
N/A
±10
0 ~ 10
±5
0~5
±2.5
0 ~ 2.5
±1.25
0 ~ 1.25
±0.625
0.1
0.1
0.2
0.2
0.4
Analog Output
Channels
Resolution
Output Rate
Output Range
Internal Reference
External Reference
16-26
Slew Rate
Driving Capability
Output Impedance
Operation Mode
Accuracy
1
12 bits
Static update
(V, software programmable)
Unipolar
0 ~ 5, 0 ~ 10
0 ~ x V @ x V (-10 ≤ x ≤ 10)
10 V/μs
10 mA
0.1 W max.
Software polling
INLE: ±1LSB
Data Acquisition Boards
Channels
Compatibility
Input Voltage
16
5 V/TTL
Logic 0: 0.8 V max., Logic 1: 2 V min.
Digital Output
Channels
Compatibility
Output Voltage
Output Capability
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 8.0 mA @ 0.8 V
Source: -0.4 mA @ 2.0 V
Counter/Timer
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
1
16 bits
5 V/TTL
10 MHz
Internal: 10 MHz
External Clock Frequency: 10 MHz
General
Bus Type
I/O Connector
Universal PCI V2.2
1 x DB37 female connector
2 x 20-pin box header
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 850 mA
Max.: 5 V @ 1 A
Operating Temperature 0 ~ 60 °C (32 ~ 140 °F)
Storage Temperature -20 ~ 70 °C (-4 ~ 158 °F)
Operating Humidity
5 ~ 85% RH non-condensing (refer to IEC 68-1, -2, -3)
Storage Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-1, -2, -3)
Certifications
CE
PCI-1718HDU
Ordering Information
PCI-1718HDU
PCL-10120-1
PCL-10120-2
PCL-10137-1
PCL-10137-2
PCL-10137-3
PCLD-8115
PCLD-880
Pin Assignments
100 kS/s, 12-bit, 16-ch Univ. PCI Multi. Card
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
Wiring Board w/ CJC Circuit & One DB37 Cable
Wiring Board w/ Two 20-pin Flat Cables & Adapter
A/D S0
A/D S1
A/D S2
A/D S3
A/D S4
A/D S5
A/D S6
A/D S7
A.GND
A.GND
V.REF
S0*
+12 V
S2*
D.GND
NC
Counter 0 CLK
Counter 0 OUT
+5V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
A/D S8
A/D S9
A/D S10
A/D S11
A/D S12
A/D S13
A/D S14
A/D S15
A.GND
A.GND
DA0.OUT
DA0.VREF
S1*
S3*
D.GND
EXT.TRIG
Counter 0 GATE
PACER
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
Serial Comm. Cards
Video Surveillance
Pre-Configured Systems
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-27
PCI-1741U
PCI-1742U
200 kS/s, 16-bit, 16-ch Universal PCI
Multifunction Card
1 MS/s, 16-bit, 16-ch Universal PCI
Multifunction Card
Features
16-ch single-ended or 8-ch differential analog input
PCI-1741U: 16-bit A/D converter, with up to 200 kHz sampling rate
PCI-1742U: 16-bit A/D converter, with up to 1 MHz sampling rate
Onboard FIFO memory (1,024 samples)
Auto calibration
PCI-1741U: 1 x 16-bit analog output channel
PCI-1742U: 2 x 16-bit analog output channels
16-ch digital input and 16-ch digital output
Universal PCI bus (support 3.3 V or 5 V PCI bus signal)
Onboard programmable counter
BoardID™ switch
PCI-1741U
PCI-1742U
5R+6
COMPLIANT
Introduction
PCI-1741U and PCI-1742U are powerful high-resolution multifunction data acquisition cards supporting universal PCI bus. The sampling rate is up to 1 MS/s (PCI-1742U) or
200 kS/s (PCI-1741U). Coupled with the 16-bit A/D converter, they are suitable for most data acquisition applications. PCI-1741U and PCI-1742U provides 16 single-ended or 8
differential analog input channels and 16 digital input/output channels. PCI-1741U provides one 16-bit D/A output channel, while PCI-1742U provides two 16-bit D/A output channels.
Specifications
Analog Input
Digital Input
Channels
Resolution
Max. Sampling Rate
Channels
Compatibility
Input Voltage
16 single-ended/8 differential (software programmable)
16 bits
PCI-1741U: 200 kS/s
PCI-1742U: single-channel - 1 MS/s
multi-channel - 800 kS/s
unipolar bipolar mixed - 250 kS/s
FIFO Size
1,024 samples
Overvoltage Protection 20 Vp-p
Input Impedance
100 MΩ/10pF (Off); 100 MΩ/100pF (On)
Sampling Mode
Software, onboard programmable pacer and external
Input Range*
(V, software programmable)
Unipolar
Bipolar
Accuracy (% of FSR ±1LSB)
N/A
±10
0.02
0 ~ 10
±5
0.02
0~5
±2.5
0.02
0 ~ 2.5
±1.25
0.03
0 ~ 1.25
±0.625
0.04
* Note: All channels should be set to the same range
Analog Output
Channels
PCI-1741U: 1
PCI-1742U: 2
16 bits
Static update
(V, software programmable)
Resolution
Output Rate
Output Range
Internal
Reference
Bipolar
Unipolar
External Reference
Slew Rate
16-28
Driving Capability
Output Impedance
Operation Mode
Accuracy
±5, ±10
0 ~ 5, 0 ~ 10
0 ~ +xV @ +xV (-10 ≤ x ≤ 10)
-x ~ +xV @ +xV (-10 ≤ x ≤ 10)
PCI-1741U: 20 V/us
PCI-1742U: 40 V/us
±20 mA
0.1 W max.
Software polling
INLE: ±2LSB
Data Acquisition Boards
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
Channels
Compatibility
Output Voltage
Output Capability
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 24 mA @ 0.8 V
Source: -15 mA @ 2.0 V
Counter/Timer
Channels
Compatibility
Resolution
Max. Input Frequency
Reference Clock
1
5 V/TTL
16 bits
10 MHz
Internal: 10 MHz
External Clock Frequency: 10 MHz
General
Bus Type
I/O Connector Type
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1 A, 12 V @ 700 m A
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Certifications
CE
PCI-1741U
PCI-1742U
Ordering Information
PCI-1741U
PCI-1742U
PCL-10168-1
PCL-10168-2
ADAM-3968
PCLD-8710
Fanless Panel PCs
Panel Computers
Pin Assignments
PCI-1741U
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
200 kS/s, 16-bit, 16-ch Univ. PCI Multi. Card
1 MS/s, 16-bit, 16-ch Univ. PCI Multi. Card
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
DIN-rail Wiring Board w/ CJC
Display Solutions
PCI-1742U
Ethernet Switches
Device Servers
Serial Comm. Cards
Video Surveillance
Pre-Configured Systems
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-29
PCL-711B
40 kS/s, 12-bit, 8-ch ISA
Multifunction Card
Features
8-ch single-ended analog input
12-bit A/D converter, with up to 40 kHz sampling rate
Programmable gain
One 12-bit analog output channel
16-ch digital input and 16-ch digital output
Screw-terminal board and cable included
5R+6
COMPLIANT
Introduction
PCL-711B offers four of the most popular I/O functions for PC and compatible systems: A/D conversion, D/A conversion, digital input and digital output. The inexpensive PCL-711B is
ideal for entry level applications. The features of this half-sized card include: eight 12-bit analog inputs, one 12-bit analog output, 16 digital inputs and 16 digital outputs. In addition, it
comes with a 20-point screw-terminal board and a flat cable connector. PCL-711B performs a variety of I/O jobs, and features solid software support and a large selection of available
daughterboards and accessories. It is an ideal and affordable performer for OEMs, schools and hobbyists who require a combination of analog and digital I/O.
Specifications
Analog Input
Channels
Resolution
Max. Sampling Rate
FIFO Size
Overvoltage Protection
Input Impedance
Sampling Modes
Input Range (V)
Accuracy
General
8 single-ended
12 bits
40 kS/s
0
30 Vp-p
>10 MΩ
Software, pacer or external trigger
±5, ±2.5, ±1.25, ±0.625, ±0.3125
±2 LSB
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
ISA
3 x 20-pin box header
155 x 100 mm (6.1" x 3.9")
5 V @ 500 mA typical, 1.0 A max.
12 V @ 50 mA typical, 100 mA max.
-12 V @ 14 mA typical, 20 mA max.
Operating Temperature 0 ~ 50° C (32 ~ 122° F)
Storage Temperature -20 ~ 65° C (-4 ~ 149° F)
Storage Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
Certifications
CE
Analog Output
Channels
Resolution
Output Rate
Output Range
Driving Capability
1 double-buffered
12 bits
Static update
0 ~ 5 V or 0 ~ 10 V
5 mA
Digital Input
Channels
Compatibility
Input Voltage
16
5 V/TTL
Logic 0: 0.8V max.
Logic 1: 2.0V min.
Digital Output
Channels
Compatibility
Output Voltage
Output Capability
16-30
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 8 mA
Source: 0.4 mA
Data Acquisition Boards
Ordering Information
PCL-711B
PCL-10120-1
PCL-10120-2
40 kS/s, 12-bit, 8-ch ISA Multifunction Card
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
PCL-812PG
30 kS/s, 12-bit, 16-ch ISA
Multifunction Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
16-ch single-ended analog input
12-bit A/D converter, with up to 30 kHz sampling rate
Programmable gain
Two 12-bit analog output channels
16-ch digital input and 16-ch digital output
Onboard programmable counter
A/D with DMA or interrupt
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
5R+6
COMPLIANT
Introduction
Serial Comm. Cards
PCL-812PG is a multifunction analog and digital I/O card that features the five most desired measurement and control functions for PC/AT and compatible systems: A/D conversion,
D/A conversion, digital input, digital output and counter/timer. This half-size card neatly packages 16 12-bit analog input channels, two 12-bit analog output channels, 16 digital
input channels, 16 digital output channels and a programmable counter/timer.
Video Surveillance
In addition to all the features listed above, PCL-812PG offers the convenience of programmable analog input ranges, where the analog input range can be switched by software
commands instead of DIP switches. PCL-812PG also delivers convenience and maximum resolution for applications that need different gains for different channels or different gains
for different stages of a process. Comprehensive software support, numerous I/O options and a wide range of available daughterboards make the PCL-812PG ideal for industrial
Pre-Configured Systems
applications that require a combination of analog and digital I/O.
Specifications
Digital Output
Analog Input
Channels
Resolution
Max. Sampling Rate
FIFO Size
Overvoltage Protection
Input Impedance
Sampling Modes
Input Range
Accuracy
16 single-ended
12 bits
30 kS/s
0
30 Vp-p
>10 MΩ
Software, pacer or external trigger
(V, software programmable)
±10, ±5, ±2.5, ±1.25, ±0.625, ±0.3125
0.4% of reading ±1 LSB
Analog Output
Channels
Resolution
Output Rate
Output Range
Channels
Compatibility
Output Voltage
Output Capacity
IPC Chassis
16
5 V/TTL
Logic 0: 0.5 V max., Logic 1: 2.4 V min.
Sink: 8.0 mA, Source: 0.4 mA
Counter/Timer
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
1
16 bits
5 V/TTL
500 kHz
Internal: 2 MHz
External Frequency: 10 MHz
External Voltage Range: 5V/TTL
General
2 double-buffered
12 bits
Software polling
(V, software programmable)
Internal Reference
External Reference
Unipolar
Driving Capability
5 mA
Digital Input
Channels
Compatibility
Input Voltage
16
5 V/TTL
Logic 0: 0.8 V
Logic 1: 2.0 V
0 ~ 5, 0 ~ 10
±10 max.
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
ISA
5 x 20-pin box header
185 x 100 mm (7.3" x 3.9")
5 V @ 500 mA typical, 1.0 A max.
12 V @ 50 mA typical, 100 mA max.
Operating Temperature 0 ~ 50° C (32 ~ 122° F)
Storage Temperature -20 ~ 65° C (-4 ~ 149° F)
Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Ordering Information
PCL-812PG
PCL-10120-1
PCL-10120-2
PCLD-780
30 kS/s, 12-bit, 16-ch ISA Multifunction Card
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
Screw Terminal Board w/ Two 20-pin Flat Cables
Online Download www.advantech.com/products
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
16-31
PCL-818HD/HG
PCL-818L
100 kS/s, 12-bit, 16-ch ISA
Multifunction Card
40 kS/s, 12-bit, 16-ch ISA
Multifunction Card
Features
16-ch single-ended or 8-ch differential analog input
12-bit A/D converter, with up to 100 kHz sampling rate
Programmable gain
Automatic channel/gain scanning
Onboard FIFO memory (1,024 samples, PCL-818HD/HG only)
One 12-bit analog output channel
16-ch digital input and 16-ch digital output
Onboard programmable counter
5R+6
COMPLIANT
Introduction
The PCL-818L series was designed for entry-level models to the PCL-818 series. The cards have been designed with the cost-sensitive customer in mind, but still offers the same
functions as the rest of the series, except that they have a 40 kHz sampling rate and only accepts bipolar inputs. They are fully software and connector compatible with the PCL-818HD
and PCL-818HG. This lets you upgrade your applications to these higher performance cards without hardware or software changes.
The PCL-818LS bundle consists of the PCL-818L card, the PCLD-8115 wiring terminal board and a DB37 cable assembly. The PCLD-8115 accommodates onboard passive signal
conditioning components (resistors and capacitors), allowing you to easily implement a low-pass filter, a voltage attenuator or a 4 ~ 20 mA voltage converter.
Specifications
Analog Input
Digital Input
Channels
Resolution
Max. Sampling Rate
Channels
Compatibility
Input Voltage
16 single-ended / 8 differential
12 bits
100 kS/s for all input ranges (PCL-818HD/HG only)
40 kS/s for all input ranges (PCL-818L only)
FIFO Size
1,024 samples
Overvoltage Protection 30 Vp-p
Input Impedance
10 MΩ
Sampling Modes
Software, pacer or external
Input Range
(V, software programmable)
PCL-818L/818HD
Bipolar
Unipolar*
Accuracy
(% of FSR ±1LSB)
±10
N/A
±5
0 ~ 10
±2.5
0~5
±1.25
0 ~ 2.5
±0.625
0 ~ 1.25
0.1
0.1
0.2
0.2
0.4
* Note: PCL-818L doesn’t support unipolar input range.
PCL-818HG
Bipolar
Unipolar
Accuracy
(% of FSR
±1LSB)
±10
N/A
±5
0 ~ 10
±1
N/A
±0.5
0~1
±0.1
N/A
±0.05
0 ~ 0.1
±0.01
N/A
±0.005
0 ~ 0.01
0.1
0.1
0.2
0.2
0.4
0.4
0.8
0.8
Digital Output
Channels
Compatibility
Output Voltage
Output Capability
Channels
Resolution
Output Rate
Output Range
Internal Reference
External Reference
16-32
Channels
A/D Pacer
Max. and Min. Rates
Counter
Unipolar
0 ~ 5, 0 ~ 10
0 ~ 10, 0 ~ -10
Data Acquisition Boards
1
32-bit with 10 MHz or 1 MHz time base
2.5 MHz and 0.00023 Hz
One 16-bit counter with 100 kHz time base
General
Power Consumption
1
12 bits
Static update
(V, software programmable)
16
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 8 mA
Source: -0.4 mA
Timer/Counter
Analog Output
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
5 V @ 210 mA typical, 500 mA max.
12 V @ 20 mA typical, 100 mA max.
-12 V @ 20 mA typical, 40 mA max.
I/O Connector
1 x DB37 female connector
2 x 20-pin box header
Dimensions (L x H)
155 x 100 mm (6.1" x 3.9")
Operating Temperature 0 ~ 50° C (32 ~ 122° F)
Storage Temperature -20 ~ 65° C (-4 ~ 149° F)
Operating Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
PCL-818HD/HG
PCL-818L
Ordering Information
PCL-818HD
PCL-818HG
PCL-818L
PCL-818LS
PCL-10137-1
PCL-10137-2
PCL-10137-3
PCLD-8115
PCLD-880
Pin Assignments
High-performance Half-size Multifunction Card
High-performance and High-gain Multi. Card
Low-cost High-perform. Half-size Multi. Card
PCL-818L w/ PCLD-8115 and DB37 Cable
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
Wiring Board w/ CJC Circuit & One DB37 Cable
Wiring Board w/ Two 20-pin Flat Cables & Adapter
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
Serial Comm. Cards
Video Surveillance
Pre-Configured Systems
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-33
PCIE-1744
30 MS/s, 12-bit, Simultaneous 4-ch
Analog Input PCI Express Card
Features
NEW
4 single-ended analog input channels
12-bit A/D converter, with up to 30 MHz sampling rate
Programmable gain
Onboard FIFO memory (32,768 samples, each channel)
4 A/D converters simultaneously sampling
Multiple A/D triggering modes
Programmable pacer/counter
BoardID™ switch
PCI Express V1.0
5R+6
COMPLIANT
Introduction
PCIE-1744 is an advanced high-performance data acquisition card based on the PCI Express bus. With a large FIFO of 32k for each channel, the maximum sampling rate can get up
to 30 MS/s, on each channel, with an emphasis on continuous, non-stop, high-speed, streaming data of samples to host memory.
Specifications
Ordering Information
Analog Input
Channels
Resolution
Max. Sampling Rate
FIFO Size
Overvoltage Protection
Input Impedance
Sampling Modes
Trigger Modes
Input Range (V)
4 single-ended
12 bits
30 MS/s
32,768 samples for each channel
14 Vp-p
50 Ω/1 MΩ/Hi Z jumper selectable/100 pF
Software polling, pacer
Post-trigger, pre-trigger, delay-trigger, about-trigger
±5, ±2.5, ±1, ±0.5
General
Bus Type
I/O Connectors
16-34
PCI Express V1.0
4 x BNC connector (for AI)
1 x PS/2 connector (for Ext. clock and trigger)
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 850 mA ; 12 V @ 600 mA
Max.: 5 V @ 1 A; 12 V @ 700m A
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storage Temperature -20 ~ 85° C (-4 ~ 185° F)
Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Certifications
CE
Data Acquisition Boards
PCIE-1744
ADAM-3909
PCL-1010B-1
PCL-10901-1
PCL-10901-3
30 MS/s, 12-bit, Simultaneous 4-ch AI PCIe Card
DB9 DIN-rail Wiring Board
BNC to BNC Wiring Cable, 1 m
PS/2 to DB9 Cable, 1 m
PS/2 to DB9 Cable, 3 m
Pin Assignments
PCI-1714U
PCI-1714UL
30 MS/s, 12-bit, Simultaneous 4-ch Analog
Input Universal PCI Card
10 MS/s, 12-bit, Simultaneous 4-ch Analog
Input Universal PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
4 single-ended analog input channels
12-bit A/D converter, with up to 30 MHz sampling rate
Programmable gain
Onboard FIFO memory
(PCI-1714U: 32,768 samples; PCI-1714UL: 8,192 samples, each channel)
4 A/D converters simultaneously sampling
Multiple A/D triggering modes
Programmable pacer/counter
Fanless Panel PCs
Panel Computers
Display Solutions
BoardID™ switch
Universal PCI Bus (support 3.3 V or 5 V PCI bus signal)
Ethernet Switches
Device Servers
5R+6
COMPLIANT
Introduction
Serial Comm. Cards
PCI-1714U is an advanced high-performance data acquisition card based on the PCI bus. With a large FIFO of 32,768 for each channel, the maximum sampling rate of PCI-1714U
can get up to 30 MS/s, on each channel, with an emphasis on continuous, non-stop, high-speed, streaming data of samples to host memory. The low-cost PCI-1714UL offers 10
MS/s on each channel at a stable rate, and has also been equipped with a universal PCI interface.
Specifications
Ordering Information
Analog Input
Channels
Resolution
Max. Sampling Rate
4 single-ended
12 bits
PCI-1741U: 30 MS/s
PCI-1741UL: 10 MS/s
FIFO Size
PCI-1714U: 32,768 samples for each channel
PCI-1714UL: 8,192 samples for each channel
Overvoltage Protection 30 Vp-p
Input Impedance
50 Ω/1 MΩ/Hi Z jumper selectable/100 pF
Sampling Modes
Software polling, pacer
Trigger Modes
Post-trigger, pre-trigger, delay-trigger, about-trigger
Input Range (V)
±5, ±2.5, ±1, ±0.5
PCI-1714U
PCI-1714UL
ADAM-3909
PCL-1010B-1
PCL-10901-1
PCL-10901-3
30 MS/s, 12-bit, Simultaneous 4-ch AI PCI Card
10 MS/s, 12-bit, Simultaneous 4-ch AI PCI Card
DB9 DIN-rail Wiring Board
BNC to BNC Wiring Cable, 1 m
PS/2 to DB9 Cable, 1 m
PS/2 to DB9 Cable, 3 m
Pin Assignments
Bus Type
I/O Connectors
Pre-Configured Systems
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
General
Video Surveillance
Universal PCI V2.2
4 x BNC connector (for AI)
1 x PS/2 connector (for Ext. clock and trigger)
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 850 mA ; 12 V @ 600 mA
Max.: 5 V @ 1 A; 12 V @ 700m A
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storage Temperature -20 ~ 85° C (-4 ~ 185° F)
Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Certifications
CE
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-35
PCI-1713U
100 kS/s, 12-bit, 32-ch Isolated Analog
Input Universal PCI Card
Features
2,500 VDC isolation protection
32-ch single-ended or 16-ch differential or a combination of analog input
12-bit A/D converter, with up to 100 kHz sampling rate
Programmable gain
Onboard FIFO memory (4,096 samples)
S/W, internal or external pacer sampling modes supported
5R+6
COMPLIANT
Introduction
The PCI-1713U is an isolated high-speed analog input card for the PCI bus. It provides 32 analog input channels with a sampling rate up to 100 kS/s, 12-bit resolution and isolation
protection of 2,500 VDC.
Ordering Information
Specifications
Analog Input
Channels
32 single-ended/16 differential
(software programmable)
Resolution
12 bits
Max. Sampling Rate
100 kS/s
FIFO Size
4,096 samples
Overvoltage Protection 30 Vp-p
Isolation Protection
2,500 VDC
Input Impedance
1 GΩ
Sampling Modes
Software, onboard programmable pacer and external
(TTL level)
Input Range
(V, software programmable)
Unipolar
Bipolar
Accuracy (% of FSR ±1LSB)
N/A
±10
0.1
0 ~10
±5
0.1
0~5
±2.5
0.2
0 ~ 2.5
±1.25
0.2
0 ~ 1.25
±0.625
0.4
General
Universal PCI V2.2
1 x DB37 female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA
Max.: 5 V @ 1.0 A
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
16-36
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
Data Acquisition Boards
PCI-1713U
PCLD-881B
ADAM-3937
PCL-10137-1
PCL-10137-2
PCL-10137-3
100 kS/s, 12-bit, 32-ch Isolated AI PCI Card
Wiring Board for PCI-1713U, PCI-1715U & PCL-813B
DB37 DIN-rail Wiring Board
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
Pin Assignments
PCI-1715U
500 kS/s, 12-bit, 32-ch Isolated Analog
Input Universal PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
2,500 VDC isolation protection
32-ch single-ended or 16-ch differential or a combination of analog input
12-bit resolution for A/D conversion
Up to 500 kS/s sampling rate for A/D conversion
Programmable gain for each input channel
Onboard 1,024 samples FIFO buffer
S/W, internal or external pacer sampling modes supported
Universal PCI Bus
Fanless Panel PCs
Panel Computers
Display Solutions
BoardID™ switch
Ethernet Switches
Device Servers
5R+6
COMPLIANT
Introduction
Serial Comm. Cards
The PCI-1715U is an isolated high-speed analog input card for the PCI bus. It provides 32 analog input channels with a sampling rate up to 500 kS/s, 12-bit resolution and isolation
protection of 2,500 VDC.
Specifications
Ordering Information
Analog Input
Channels
32 single-ended/16 differential
(software programmable)
Resolution
12 bits
Max. Sampling Rate
500 kS/s
FIFO Size
1,024 samples
Overvoltage Protection 30 Vp-p
Isolation Protection
2,500 VDC
Input Impedance
1 GΩ
Sampling Modes
Software, onboard programmable pacer and external
(TTL level)
Input Range
(V, software programmable)
Unipolar
Bipolar
Accuracy (% of FSR ±1LSB)
N/A
±10
0.1
0 ~10
±5
0.1
0~5
±2.5
0.2
0 ~ 2.5
±1.25
0.2
PCI-1715U
PCLD-881B
ADAM-3937
PCL-10137-1
PCL-10137-2
PCL-10137-3
500 kS/s, 12-bit, 32-ch Isolated AI PCI Card
Wiring Board for PCI-1713U, PCI-1715U & PCL-813B Pre-Configured Systems
DB37 DIN-rail Wiring Board
DB37 Cable, 1 m
IPC Chassis
DB37 Cable, 2 m
DB37 Cable, 3 m
Pin Assignments
0 ~ 1.25
±0.625
0.4
General
Video Surveillance
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
1 x DB37 female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA
Max.: 5 V @ 1.0 A
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-37
PCI-1747U
250 kS/s, 16-bit, 64-ch Analog Input
Universal PCI Card
Features
64-ch single-ended or 32-ch differential or a combination of analog input
16-bit A/D converter, with up to 250 kHz sampling rate
Auto calibration
Onboard FIFO memory (1,024 samples)
PCI-Bus mastering data transfer
Universal PCI Bus (support 3.3 V or 5 V PCI bus signal)
BoardID™ switch
5R+6
COMPLIANT
Introduction
PCI-1747U is a high-resolution, high-channel-count analog input card for the PCI bus. Its sampling rate is up to 250 kS/s and 16-bit resolution provides the resolution needed for
most data acquisition applications. PCI-1747U provides 64 single-ended, 32 differential analog input channels or a combination of these. It also has built in a 1,024 FIFO buffer for
analog input data.
Specifications
Ordering Information
Analog Input
Channels
Resolution
Max. Sampling Rate
FIFO Size
Overvoltage Protection
Input Impedance
Sampling Modes
Input Range
Unipolar
Bipolar
Accuracy (% of FSR ±1LSB)
64 single-ended, 32 differential, or combination
16 bits
250 kS/s
1,024 samples
20 Vp-p
100 MΩ/10 pF (Off); 100 MΩ/100 pF (On)
Software and onboard programmable pacer
(V, software programmable)
N/A
±10
0.03
0 ~ 10
±5
0.02
0~5
±2.5
0.02
0 ~ 2.5
±1.25
0.03
0 ~ 1.25
±0.625
0.04
General
16-38
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1 A, 12 V @ 700 m A
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Certifications
CE
Data Acquisition Boards
PCI-1747U
ADAM-3968
PCL-10168-1
PCL-10168-2
250 kS/s, 16-bit, 64-ch AI Universal PCI Card
68-pin DIN-rail SCSI Wiring Board
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
Pin Assignments
PCL-813B
25 kS/s, 12-bit, 32-ch Isolated
Analog Input ISA Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
32 single-ended analog input channels
12-bit A/D converter, with up to 25 kHz sampling rate
Isolation protection (500 VDC)
Program-controlled A/D trigger and data transfer
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
5R+6
COMPLIANT
Introduction
Serial Comm. Cards
PCL-813B is a 12-bit 32-channel analog input card that offers high-voltage isolation on each analog input. It is an extremely cost effective solution for applications in industrial
measurement and monitoring. The card offers 32 analog input channels with software programmable gain on each channel and two DC-to-DC converters on a 4-layer PCB with an
integral ground plane. Optically-isolated inputs provide over 500 VDC of isolation between the analog inputs and the PC, protecting the PC and peripherals from damage due to high
Video Surveillance
voltages on the input lines. PCL-813B is ideal for situations where the budget-conscious user requires flexibility, stability and a high level of isolation protection. PCL-813B comes
with the PCLD-881B wiring terminal board and a DB37 cable assembly.
Pre-Configured Systems
Specifications
Ordering Information
Analog Input
Channels
Resolution
Max. Sampling Rate
Overvoltage Protection
Isolation Protection
Input Impedance
Sampling Modes
Input Range
Unipolar (jumper selection)
Bipolar (software selection)
Accuracy (% of FSR ±1LSB)
32 single-ended
12 bits
25 kHz
30 Vp-p
500 VDC from analog input to PC
> 10 MΩ
software trigger
(V, software programmable)
0 ~ 10
±5
0.1
0~5
±2.5
0.2
PCL-813B
PCLD-881B
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
25 kS/s, 12-bit, 32-ch Isolated AI ISA Card
IPC Chassis
Wiring Board for PCI-1713U, PCI-1715U & PCL-813B
DB37 Cable, 1 m
DB37 Cable, 2 m
SBCs and Backplanes
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
Typical application for PCL-813B:
0 ~ 2.5
±1.25
0.2
Embedded IPCs
0 ~ 1.25
±0.625
0.4
Mobile Computers
General
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Industrial Motherboards
ISA
1 x DB37 female connector
219 x 100 mm (8.6" x 3.9")
5 V @ 660 mA max.
12 V @ 140 mA max.
Operating Temperature 0 ~ 50° C (32 ~ 122° F)
Storage Temperature -20 ~ 65° C (-4 ~ 149° F)
Storage Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
IPC Peripherals
Industrial 4 ~ 20 mA Output Device Monitoring
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-39
PCI-1720U
12-bit, 4-ch Isolated Analog
Output Universal PCI Card
Features
4 x 12-bit D/A output channels
Multiple output ranges
2,500 VDC isolation between the outputs and the PCI bus
Keeps the output settings and values after system reset
One DB37 connector for easy wiring
Universal PCI and BoardID™ switch
5R+6
COMPLIANT
Introduction
The PCI-1720U provides four 12-bit isolated digital-to-analog outputs for the Universal PCI bus. With isolation protection of 2500 VDC between the outputs and the PCI bus, the
PCI-1720U is ideal for industrial applications where high-voltage protection is required.
Specifications
Ordering Information
Analog Output
Channels
Resolution
Output Rate
Output Range
Internal Reference
Slew Rate
Isolation Protection
Driving Capability
Operation Modes
Accuracy
Excitation Voltage
4 isolated
12 bits
Static update
(Software programmable)
Unipolar (V)
Bipolar (V)
Current Loop (mA)
0 ~ 5, 0 ~ 10
±5, ±10
0~ 20, 4 ~ 20
2 V/μs
2,500 VDC
5 mA
Software polling
±0.024%
50 V (max.)
General
16-40
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
1 x DB37 female connector
175 x 100 mm (6.9" x 3.9")
5 V @ 350 mA (typical), 500 mA (max.)
12 V @ 200 mA (typical), 350 mA (max.)
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Certifications
CE
Data Acquisition Boards
PCI-1720U
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
PCLD-880
12-bit, 4-ch Isolated AO Universal PCI Card
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
Wiring Board w/ Two 20-pin Flat Cables & Adapter
Pin Assignments
PCI-1721
12-bit, 4-ch Analog Output PCI
Card with 16-ch Digital I/O
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
10 MHz maximum digital update rate
PCI-bus mastering for data transfer
Auto calibration function
Four analog output channels with 1,024 samples FIFO buffer
A 12-bit DAC is equipped for each of analog output channels
Real-time waveform output function with internal/external pacer
Synchronized output function
Flexible output types and range settings
Keeps the output settings and values after system hot reset
16-ch DI/O and one 10 MHz 16-bit resolution counter
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
BoardID™ switch
Device Servers
5R+6
COMPLIANT
Introduction
Serial Comm. Cards
PCI-1721 is an advanced high-speed analog output card for the PCI bus, and each of analog output channels are equipped with a 12-bit, double-buffered DAC. It features many
powerful and unique functions, like a waveform output function with 10 MHz maximum update rate, auto-calibration and a BoardID switch. PCI-1721 is an ideal solution for industrial
applications where high-speed continuous analog output or real-time waveform output functions are required.
Specifications
Video Surveillance
Pre-Configured Systems
Analog Output
Channels
Resolution
FIFO Size
Output Rate
Reference Clock
Output Range
Internal Reference
External Reference
Slew Rate
Driving Capability
Output Impedance
Operation Modes
Accuracy
Counter/Timer
Unipolar
Bipolar
Current Loop
0 ~ 5 V, 0 ~ 10 V,
±5 V, ±10 V
0 ~ 20 mA, 4 ~ 20 mA
0 ~ +x V @ +x V (-10 ≤ x ≤ 10)
-x ~ +x V @ +x V (-10 ≤ x ≤ 10)
10 V/μs
10 mA
0.1 Ω max.
Single/continuous/waveform/synchronized output
Relative: ±1 LSB
Differential Non-linearity: ±1 LSB (monotonic)
Output Capability
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
1
16 bits
5 V/TTL
10 MHz
Internal: 10 MHz
External Clock Frequency: 10 MHz max.
External Voltage Range: 0.8 V max, 2.0 V min.
16 (shared by input/output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 0.5 V @ 24 mA
Source: 2.0 V @ -15 mA
IPC Chassis
SBCs and Backplanes
General
Industrial Motherboards
Embedded IPCs
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1 A, 12 V @ 700 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storage Temperature -20 ~ 85° C (-4 ~ 185° F)
Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Certifications
FCC, CE
Ordering Information
Digital Input/Output
Channels
Compatibility
Input Voltage
4
12 bits
1,024 samples
10 MHz or static update
Internal: 10 MHz
External Clock Frequency: 10 MHz max.
External Voltage Range: 0.8 V max., 2 V min.
(Software programmable)
PCI-1721
PCL-10168-1
PCL-10168-2
ADAM-3968
12-bit, 4-ch Advanced PCI Analog Output Card
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-41
PCI-1723
16-bit, 8-ch Analog Output PCI Card
with 16-ch Digital I/O
Features
Auto calibration function
A 16-bit DAC is equipped for each analog output channel
Synchronized output function
Keeps the output settings and values after system hot reset
2-port (16-channel) user-defined digital input/output channels
BoardID™ switch
5R+6
COMPLIANT
Introduction
PCI-1723 is a non-isolated multiple channel analog output card for the PCI bus, and each analog output channel is equipped with a 16-bit, double-buffered DAC. It also features an
auto-calibration function and a BoardID™ switch. The PCI-1723 is an ideal solution for industrial applications where multiple analog output channels are required.
Specifications
Ordering Information
Analog Output
Channels
Resolution
Output Rate
Output Range
Internal Reference
Driving Capability
Output Impedance
Operation Modes
Accuracy
8
16 bits
Static update
(Software programmable)
Bipolar (V)
Current Loop (mA)
±10
0 ~ 20, 4 ~ 20
5 mA
0.1 Ω max.
Software polling, synchronized output
Relative: ±6 LSB
Differential Non-linearity: ±6 LSB (monotonic)
Digital Input/Output
Channels
Compatibility
Input Voltage
Output Capability
16 (shared by input/output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 0.5 V @ 24 mA
Source: 2.0 V @ -15 mA
General
16-42
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1 A, 12 V @ 700 mA
Operating Temperature 0 ~ 60° C (32 ~ 158° F) (IEC 68-2-1, 2)
Storage Temperature -20 ~ 85° C (-4 ~ 185° F)
Storage Humidity
5 ~ 95 % RH non-condensing (IEC 68-2-3)
Certifications
CE
Data Acquisition Boards
PCI-1723
PCL-10168-1
PCL-10168-2
ADAM-3968
16-bit, 8-ch Non-isolated Analog Output PCI Card
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
Pin Assignments
PCI-1724U
14-bit, 32-ch Isolated Analog Output
Universal PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
32 high-density analog output channels
Flexible Output Range: +/-10 V, 0 ~ 20 mA and 4 ~ 20 mA
Synchronized output function
Keeps the output settings and values after system hot reset
BoardID™ switch
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
5R+6
COMPLIANT
Introduction
Serial Comm. Cards
PCI-1724U is an isolated high-density multiple channel analog output card for the PCI bus, where each analog output channel is equipped with a 14-bit DAC. It feaures optional
voltages, current output and a BoardID™ switch. PCI-1724U is an ideal solution for industrial applications where multiple analog output channels are required.
Specifications
Video Surveillance
Pin Assignments
Analog Output
Internal Reference
Pre-Configured Systems
Channels
Resolution
Output Rate
Output Range
32 isolated
14 bits
Static update
(Software programmable)
Bipolar (V)
Current Loop (mA)
Isolation Protection
Output Impedance
Operation Modes
Accuracy
Driving Capacity
AGND
AO8
AGND
AO9
±10
0 ~ 20, 4 ~ 20
AGND
AO10
1,500 VDC system isolation
0.1 Ω max.
Software polling, synchronized output
Relative: ±4 LSB
Differential Non-linearity: ±2 LSB (monotonic)
10 mA
AGND
AO11
AGND
AO12
AGND
AO13
AGND
General
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Operating Temperature
Storage Temperature
Storage Humidity
Universal PCI V2.2
1 x DB62 female connector
175 x 100 mm (6.9" x 3.9")
5 V @ 400 mA, 12 V @ 270 mA max.
0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
-20 ~ 70° C (-4 ~ 158° F)
5 ~ 95 % RH, non-condensing (refer to IEC 68-2-3)
AO14
AGND
AO15
AGND
AGND
AGND
AGND
NC
AGND
AO0
AGND
AO1
AGND
AO2
AGND
AO3
AGND
AO4
AGND
AO5
AGND
AO6
AGND
AO7
AO24
AO25
AO26
AO27
NC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
Ordering Information
PCI-1724U
PCL-10162-1
PCL-10162-3
ADAM-3962
14-bit, 32-ch Isolated AO Universal PCI Card
DB62 Cable, 1 m
DB62 Cable, 3 m
DB62 DIN-rail Wiring Board
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
AGND
AO16
AGND
AO17
AGND
AO18
AGND
AO19
AGND
AO20
AGND
AO21
AGND
AO22
AGND
AO23
AO28
AO29
AO30
AO31
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-43
PCI-1727U
14-bit, 12-ch Analog Output Universal PCI
Card with 32-ch Digital I/O
Features
12 independent analog output channels
Fuse on each channel
Universal PCI for 5 V and 3.3 V support
BoardID™ switch
Synchronized output function
5R+6
COMPLIANT
Introduction
PCI-1727U provides twelve 14-bit analog output channels, and is pin-compatible with the ISA PCL-727 card for easy migration. It supports both ±10 V and 0 ~ 20 mA current loop
(sink). The card’s onboard DC-to-DC converter ensures the full 10 V D/A output is always available.
Each analog output channel has a built-in fuse to protect the circuit, PC and the external devices. PCI-1727U is an ideal, economical solution for the applications which require
multiple PID control loops. In addition to its analog outputs, PCI-1727U provides 16 TTL digital input and 16 TTL digital output channels that are easily applied with industrial on/
off control applications.
Specifications
General
Analog Output
Channels
Resolution
Output Rate
Output Range
Bipolar (V)
Unipolar (V)
Current Loop (mA)
Slew Rate
Driving Capability
Operation Modes
Current Loop
Excitation Voltage
12
14 bits
Static update
(Software programmable)
±5
0 ~ 5, 0 ~10
4 ~ 20
0.7 V/μs
15 mA
Software polling, synchronized output
8 ~ 36 V
Digital Input
Channels
Compatibility
Input Voltage
Input loading
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
0.5 V @ 0.4 mA max. (low)
2.7 V @ 50 μA max. (high)
Digital Output
16-44
Channels
Compatibility
Output Voltage
Output Capability
16
5 V/TTL
Logic 0: 0.5 V, Logic 1: 2.4 V
Sink: 0.8 mA @ 0.5 V
Source: 0.4 mA @ 2.4 V
Data Acquisition Boards
Bus Type
I/O Connectors
Universal PCI V2.2
1 x 37-pin D-type female connector
2 x 20-pin box header
Power Consumption
5 V @ 460 mA typical, 500 mA max
12 V @ 150 mA typical,100 mA max
Dimensions (L x H)
175 × 100 mm (6.9" ×3.9")
Operating Temperature 0 ~ 50° C (32 ~ 122° F)
Storing Temperature
-20 ~ 65° C (-4 ~ 149° F)
Storing Humidity
5 ~ 95% RH, non-condensing
Ordering Information
PCI-1727U
PCL-10120-1
PCL-10137-1
ADAM-3937
PCLD-780
PCLD-782
PCLD-785
14-bit, 12-ch Universal Analog Output Card
20-pin flat cable, 1 m
DB37 cable assembly, 1 m
DB37 wiring terminal for DIN-rail mounting
Two 20-pin screw terminal board
Opto-isolated D/I board
Relay output board
PCL-727
12-bit, 12-ch Analog Output ISA Card
with 32-ch Digital I/O
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
12 independent analog output channels
Fuse on each channel
Fanless Panel PCs
BoardID™ switch
Synchronized output function
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
5R+6
COMPLIANT
Introduction
Serial Comm. Cards
The PCL-727 provides 12 analog output channels on a full-size add-on card. In additional to its analog output, the PCL-727 provides 16 digital output channels and 16 digital output
channels. It is an ideal and economical solution for industrial applications that requires multiple analog and/or current output channels.
Video Surveillance
Specifications
General
Analog Output
Channels
Resolution
Output Rate
Output Range
Bipolar (V)
Unipolar (V)
Current Loop (mA)
Driving Capability
Operation Modes
Current Loop
Excitation Voltage
12
12 bits
Static update
(Software programmable)
±5
0 ~ 5, 0 ~10
4 ~ 20
15 mA
Software polling, synchronized output
8 ~ 36 V
Input loading
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
0.5 V @ 0.4 mA max. (low)
2.7 V @ 50 μA max. (high)
Digital Output
Channels
Compatibility
Output Voltage
Output Capability
ISA
1 x DB37 female connector
2 x 20-pin box header
Power Consumption
5 V @ 500 mA typical, 1A max.
12 V @50 mA typical, 110 mA max.
-12 V @ 14 mA typical, 90 mA max.
Dimensions (L x H)
340 x 100 mm (13.4" x 3.9")
Operating Temperature 0 ~ 50° C (32 ~ 122° F)
Storage Temperature 0 ~ 65° C (32 ~ 149° F)
Storage Humidity
5 ~ 95% RH, non-condensing
Ordering Information
Digital Input
Channels
Compatibility
Input Voltage
Pre-Configured Systems
Bus Type
I/O Connectors
16
5 V/TTL
Logic 0: 0.5 V, Logic 1: 2.4 V
Sink: 0.8 mA @ 0.5 V
Source: 0.4 mA @ 2.4 V
PCL-727
PCL-10120-1
PCL-10120-2
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
PCLD-780
PCLD-782
PCLD-785
12-bit, 12-ch AO ISA Card w/ Digital I/O
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
Screw Terminal Board w/ Two 20-pin Flat Cables
16-ch Isolated DI Board w/ 1m 20-pin Flat Cable
16-ch Relay Board w/ One 1m 20-pin Flat Cable
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-45
PCL-726
PCL-728
12-bit, 6-ch Analog Output ISA Card
with 32-ch Digital I/O
12-bit, 2-ch Isolated Analog Output
ISA Card
Features
Independent analog output channels
12-bit resolution double-buffered D/A converter
Multiple voltage ranges: ±10 V, ±5 V, 0 ~ 5 V, 0 ~ 10 V and 4 ~ 20 mA current
loop (sink)
16 digital input and 16 digital output channels (PCL-726)
Two DB9 connectors for easy wiring (PCL-728)
PCL-726
PCL-728
5R+6
COMPLIANT
Introduction
PCL-726, and PCL-728 are analog output cards with 12-bit analog output channels. You can individually configure each channel to any of the following ranges: 0 ~ 5 V, 0~10 V,
±5 V, ±10 V and 4~20 mA current loop (sink). Designed for use in industrial environments, these cards are ideal, economical solutions for applications that require multiple analog
outputs or current loops.
Specifications
Analog Output
General
Channels
Resolution
Output Rate
Reference Voltage
Output Range
Internal Reference
External Reference
Bipolar (V)
Unipolar (V)
Current Loop (mA)
Bipolar (V)
Isolation Protection
Driving Capability
Output Impedance
Operation Modes
Accuracy
Excitation Voltage
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output (PCL-726)
16-46
Channels
Compatibility
Output Voltage
Output Capability
Dimensions (L x H)
16
5 V/TTL
Logic 0: 0.5 V, Logic 1: 2.4 V
Sink: 0.5 V @ 0.4 mA max.
Source: 2.7 V @ 50 mA max.
Data Acquisition Boards
ISA
PCL-726: 4 x 20-pin box header
PCL-728: 2 x DB9 female connector
PCL-726: 340 x 100 mm (13.4" x 3.9")
PCL-728: 184 x 119 mm (7.25" x 4.7")
Power Consumption
PCI-726:
±5
0 ~ 5, 0 ~10
4 ~ 20
±10
500 VDC (PCL-728)
5 mA
0.1 Ω
Software polling
0.012%
8 ~ 36 V for 4 ~ 20 mA current loop
Digital Input (PCL-726)
Channels
Compatibility
Input Voltage
Bus Type
I/O Connectors
PCL-726: 6
PCL-728: 2 isolated
12 bits, double buffered
Static update
Internal: -5 V (±0.05 V)
-10 V (±0.05 V)
External: DC or AC, ±10V max.
(Software programmable)
5 V @ 500 mA typical, 1 A max.
12 V @ 80 mA typical, 110 mA max.
12 V @ 60 mA typical, 90 mA max.
PCL-728:
5V @ 800 mA max.
Operating Temperature 0 ~ 50° C (32 ~ 122° F)
Storage Temperature 0 ~ 65° C (32 ~ 149° F)
Operating Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Ordering Information
PCL-726
PCL-728
PCL-10120-1
PCL-10120-2
PCLD-780
PCLD-782
PCLD-785
PCLD-880
ADAM-3909
ADAM-3920
12-bit, 6-ch AO ISA Card w/ Digital I/O
12-bit, 2-ch Isolated AO ISA Card
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
Screw Terminal Board w/ Two 20-pin Flat Cables
16-ch Isolated DI Board w/ 1m 20-pin Flat Cable
16-ch Relay Board w/ One 1m 20-pin Flat Cable
Wiring Board w/ Two 20-pin Flat Cables & Adapter
DB9 DIN-rail Wiring Board
20-pin DIN-rail Flat Cable Wiring Board
PCI-1735U
64-ch Digital I/O and Counter Universal
PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
ISA-Compatible with PCL-720+
32 TTL-level digital input channels
32 TTL-level digital output channels
High-output driving capacity
Low-input loading
Fanless Panel PCs
Panel Computers
3 programmable counter/timer channels
User configurable clock source
Breadboard area for custom circuits
Display Solutions
Ethernet Switches
Device Servers
5R+6
COMPLIANT
Introduction
Serial Comm. Cards
The PCI-1735U digital I/O and counter card is PC-compatible add-on card with 32 digital input channels, 32 digital output channels and three programmable counter/timer channels.
Their digital I/O channels are TTL-compatible and use 74LS244 driver/buffer circuits to provide high output driving capacity. These buffered circuits also require lower input loading
current than regular TTL circuits. The cards' 8254 programmable counter/timer provides three flexible 16-bit counter/timer channels. You can generate waves and pulses by programming
Video Surveillance
the 8254. Jumper settings determine the clock crystal frequency. The card also includes a breadboard area perfect for customized circuits.
Specifications
Pre-Configured Systems
General
Digital Input
Channels
Compatibility
Input Voltage
32
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
Channels
Compatibility
Output Voltage
Output Capability
32
5 V/TTL
Logic 0: 0.5 V max.
Logic 1: 2.0 V min.
Sink: 0.5 V max @ 24 mA
Source: 2.0 V min. @ 15 mA
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
Internal:
External Clock Frequency:
Programmable Counter
Modes
3
16 bits
5 V/TTL
1 MHz
Selectable 1 MHz, 100 kHz, or 10 kHz base clock
Jumper selectable divider: x2, x1, x0.5, and x0.25
6
IPC Chassis
SBCs and Backplanes
540 (30 x 18) plated-through "donuts", each with a
.036" hole on 0.10" centers. Further, provide 5 V on the
left side, and provide GND on the right side
Bus Type
Universal PCI V2.2
I/O Connectors
5 x 20-pin box header
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Max.: 5 V @ 98.8 mA
Operating Temperature 0 ~ 65° C (32 ~ 149° F)
Storing Temperature
-25 ~ 80° C (-13 ~ 176° F)
Storing Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Ordering Information
Counter/Timer
Breadboard Area
PCI-1735U
PCL-10120-1
PCL-10120-2
PCLD-780
PCLD-782
PCLD-785
PCLD-786
PCLD-885
ADAM-3920
64-ch Digital I/O and Counter Card
IDC-20 Flat Cable, 1 m
IDC-20 Flat Cable, 2 m
2 x IDC-20 Wiring Terminal
Opto-Isolated D/I Board
16-ch Relay Output Terminal
SSR and Relay Driver Board
16-ch Power Relay Output Terminal
20-Pin Flat Cable Terminal, DIN-rail Mount
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-47
PCI-1737U
PCI-1739U
24-ch Digital I/O Universal PCI Card
48-ch Digital I/O Universal PCI Card
Features
ISA-Compatible with PCL-724(PCI-1737U) and PCL-731(PCI-1739U)
24 TTL digital I/O channels for PCI-1737U and 48 TTL digital I/O channels for
PCI-1739U
Emulates mode 0 of 8255 PPI
Interrupt handling capability
Opto-22 compatible 50-pin connectors
Output status readback
PCI universal card
PCI-1737U
PCI-1739U
5R+6
COMPLIANT
Specifications
Ordering Information
Digital Input
Channels
Compatibility
Input Voltage
Interrupt Capable Ch.
PCI-1737U: 24 (shared with output)
PCI-1739U: 48 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
PCI-1737U: 1
PCI-1739U: 2
Compatibility
Output Voltage
Output Capability
PCI-1737U
PCI-1739U
PCL-10150-1.2
PCLD-782B
PCLD-785B
PCLD-7216
PCLD-885
ADAM-3950
24-ch Digital I/O Universal PCI Card
48-ch Digital I/O Universal PCI Card
50-pin Flat Cable, 1.2 m
24-ch IDI Board w/ 20-pin & 50-pin Flat Cables
24-ch Relay Board w/ 20-pin & 50-pin Flat Cables
16-ch SSR I/O Module Carrier Board
16-ch Power Relay Board w/ 20p & 50p Flat Cables
50-pin DIN-rail Flat Cable Wiring Board
Pin Assignments
Digital Output
Channels
PCI-1737U: 24 (shared with input)
PCI-1739U: 48 (shared with input)
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 0.4 V max. @ 24 mA
Source: 2.4 V min. @ 15 mA
General
Bus Type
I/O Connectors
Universal PCI V2.2
PCI-1737U: 2 x 20-pin & 1 x 50-pin box header
PCI-1739U: 2 x 50-pin box header
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
PCI-1737U: 5 V @ 294.9 mA (max.)
PCI-1739U: 5 V @ 540.8 mA (max.)
Operating Temperature 0 ~ 65° C (32 ~ 149° F)
Storage Temperature -25 ~ 80° C (-13 ~ 176° F)
Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
*Note: CN2 is only for PCI-1739U
16-48
Data Acquisition Boards
PCI-1751
48-ch Digital I/O and 2-ch Counter PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
48 TTL digital I/O lines
Emulates mode 0 of 8255 PPI
Buffered circuits for higher driving capacity than the 8255
Interrupt handling capability
Timer/Counter interrupt capability
Supports both dry and wet contact
Keeps the I/O port setting and DO state after system reset
BoardID switch
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
5R+6
COMPLIANT
Introduction
Serial Comm. Cards
PCI-1751 is a 48-bit digital I/O card for the PCI bus. Its 48 bits are divided into six 8-bit I/O ports and users can configure each port as input or output via software. PCI-1751 also
provides one event counter and two 16-bit timers, which can be cascaded to become a 32-bit timer.
Specifications
Ordering Information
Digital Input
Channels
Compatibility
Input Voltage
Interrupt Capable Ch.
48 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2 V min.
4
Digital Output
Channels
Compatibility
Output Voltage
Output Capability
48 (shared with input)
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 0.4 V @ 24 mA
Source: 2.4 V @ 15 mA
PCI-1751
PCL-10168-1
PCL-10168-2
ADAM-3968
ADAM-3968/20
ADAM-3968/50
PCLD-8751
PCLD-8761
PCLD-8762
48-ch Digital I/O and Counter PCI Card
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
68-pin SCSI to 3 20-pin Box Header Board
68-pin SCSI to 2 50-pin Box Header Board
48-ch Isolated Digital Input Board
24-ch Replay/ Isolated Digital Input Board
48-ch Relay Board
Pin Assignments
Compatibility
Max. Input Frequency
Reference Clock
3
2 x 16-bit counters, or 1 x 32-bit counter
(jumper selectable)
1 x 16-bit event counter
5 V/TTL
10 MHz
Internal: 10 MHz
External Clock Frequency: 10 MHz
External Voltage Range: 5 V/TTL
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Mobile Computers
IPC Peripherals
DAQ
General
Pre-Configured Systems
Embedded IPCs
Counter/Timer
Channels
Resolution
Video Surveillance
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA
Max.: 5 V @ 1.0 A
Operating Temperature 0 ~ 70° C (32 ~ 158° F)
Storage Temperature -20 ~ 80° C (-4 ~ 176° F)
Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Online Download www.advantech.com/products
Signal Conditioning
USB DAQ
16-49
PCI-1753
PCI-1753E
96-ch Digital I/O PCI Card
96-ch Digital I/O Extension Card for PCI-1753
Features
Up to 96 TTL digital I/O lines
Emulates mode 0 of 8255 PPI
Buffered circuits for higher driving capacity than the 8255
Multiple-source interrupt handling capability
Interrupt output pin for simultaneously triggering external devices with the
interrupt
Output status read-back
“Pattern match” and “Change of state” interrupt functions for critical I/O
monitoring
Keeps the output settings and values after system hot reset
Supports both dry and wet contact
High-density 100-pin SCSI connector
PCI-1753
PCI-1753E
5R+6
COMPLIANT
Introduction
PCI-1753 is a 96-bit digital I/O card for the PCI bus, which can be extended to 192 digital I/O channels by connecting its extension board - PCI-1753E. The card emulates mode 0
of the 8255 PPI chip, but the buffered circuits offer a higher driving capability than the 8255. The 96 I/O lines are divided into twelve 8-bit I/O ports: A0, B0, C0, A1, B1, C1, A2, B2,
C2, A3, B3 and C3. You can configure each port as input or output via software.
Specifications
Pin Assignments
Digital Input/Output
Channels
Programming Mode
Compatibility
Input Voltage
Output Voltage
Output Capability
96 digital I/O lines for PCI-1753
192 digital I/O lines if extending with PCI-1753E
8255 PPI mode 0
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Logic 0: 0.44 V max.
Logic 1: 3.76 V min.
Sink: 0.44 V max. @ 24 mA
Source: 3.76 V min. @ 24 mA
General
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
PCI V2.2
1 x 100-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 400 mA
Max.: 5 V @ 2.7 A
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F) (refer to IEC 68-2-3)
Storage Humidity
5 ~ 95% RH, non-condensing
Ordering Information
16-50
PCI-1753
PCI-1753E
ADAM-3968
ADAM-3968/20
ADAM-3968/50
PCLD-8751
PCLD-8761
PCLD-8762
PCL-10268
96-ch Digital I/O PCI Card
Extension Board for PCI-1753
68-pin DIN-rail SCSI Wiring Board
68-pin SCSI to 3 20-pin Box Header Board
68-pin SCSI to 2 50-pin Box Header Board
48-ch Isolated Digital Input Board
24-ch Replay/ Isolated Digital Input Board
48-ch Relay Board
100-pin to Two 68-pin SCSI Cables, 1 m and 2 m
Data Acquisition Boards
PCI-1755
80 MB/s, 32-ch Digital I/O PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Bus-mastering DMA data transfer with scatter gather technology
32/16/8-bit pattern I/O with start and stop trigger function, 2 modes
handshaking I/O Interrupt handling capability
Onboard active terminators for high speed and long distance transfer
Pattern match and change state detection interrupt function
General-purpose 8-ch digital I/O
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
Introduction
Serial Comm. Cards
The PCI-1755 supports PCI-bus mastering DMA for high-speed data transfer. By setting aside a block of memory in the PC, the PCI-1755 performs bus-mastering data transfers
without CPU intervention, setting the CPU free to perform other more urgent tasks such as data analysis and graphic manipulation. The function allows users to run all I/O functions
simultaneously at full speed without losing data.
Specifications
Video Surveillance
Pre-Configured Systems
Digital Input
Channels
Compatibility
Input Voltage
Interrupt Capable Ch.
General
General: 8 (shared with output)
High speed: 32 (shared with output)
5V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
DIO0~DIO7
PCI V2.2
1 x 100-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 1 A
Max.: 5 V @ 1 A
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storage Temperature -20 ~ 85° C (-4 ~ 185° F)
Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Digital Output
Channels
Compatibility
Output Voltage
Output Capacity
General: 8 (shared with input)
High speed: 32 (shared with input)
5V/TTL
Logic 0: 0.5 V max.
Logic 1: 2.7 V min.
Sink: 0.5 V max. @ 48 A
Source: 2.4 V min. @ 15 A
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Ordering Information
PCI-1755
ADAM-39100
PCL-101100-1
Ultra-speed 32-ch Digital I/O Card
100-pin DIN-rail SCSI Wiring Board
SCSI Cable 100-pin Male 1m w/ Bolt Screw, 1m
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
Transfer Characteristics
Onboard FIFO
16 KB for DI & 16 KB DO channels
Data Transfer Mode
Bus Mastering DMA with Scatter-Gather
Data Transfer Bus Width 8/16/32 bits (programmable)
Max. Transfer Rate
DI: 80 M bytes/sec, 32-bit @ 20 MHz
120 M bytes/sec, 32-bit @ 40 MHz
external pacer when data length is less than FIFO size
DO: 80 MBytes/sec, 32-bit @ 20 MHz
Operation Mode
Handshaking
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-51
PCI-1757UP
24-ch Digital I/O Low Profile Universal
PCI Card
Features
Low profile PCI form factor
Universal PCI bus
24 TTL level digital I/O channels
Emulates mode 0 of 8255 PPI
Buffered circuits provide higher driving capability
Output status read-back
I/O configurable by software or on board DIP switch
Keeps the output settings and values after system hot reset
BoardID™ switch
Convenient DB25 connector
Supports both dry and wet contact
5R+6
COMPLIANT
Introduction
PCI-1757UP is a 24-channel digital I/O low profile PCI card that meets the PCI standard REV.2.2 (universal PCI expansion card). The card also works with 3.3 V and 5 V PCI slots,
and provides you with 24 parallel digital input/output channels that emulate mode 0 of the 8255 PPI chip. However, the buffered circuits offer a higher driving capability than the 8255.
Specifications
Ordering Information
Digital Input
Channels
Compatibility
Input Voltage
Interrupt Capable Ch.
24 (shared with output)
5 V/TTL
Logic 0: 0.8 V @ -0.2 mA
Logic 1: 2.0 V @ 20 mA
2
Output Capability
24 (shared with input)
5 V/TTL
Logic 0: 0.5 V max. @ -24 mA
Logic 1: 3.7 V max. @ 24 mA
Sink: 24 mA
Source: 15 mA
General
Universal PCI V2.2
1 x DB25 female connector
120 x 64 mm (4.7" x 2.5") Low profile MD1
Typical: 5 V @ 140 mA
Max.: 5 V @ 200 mA
Operating Temperature 0 ~ 70° C (32 ~ 158° F)
Storage Temperature -20 ~ 80° C(-4 ~ 176° F)
Storage Humidity
5 ~ 95% non-condensing
16-52
PCI-1757UP
ADAM-3925
PCL-10125-1
PCL-10125-3
PCLD-782B
PCLD-785B
24-ch Digital I/O Low Profile Universal PCI Card
DB25 DIN-rail Wiring Board
DB25 Cable, 1 m
DB25 Cable, 3 m
24-ch IDI Board w/ 20-pin & 50-pin Flat Cables
24-ch Relay Board w/ 20-pin & 50-pin Flat Cables
Pin Assignments
Digital Output
Channels
Compatibility
Output Voltage
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Data Acquisition Boards
PCL-720+
64-ch Digital I/O and Counter ISA Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
32 TTL-level digital input channels
32 TTL-level digital output channels
High-output driving capacity
Low-input loading
3 programmable counter/timer channels
User configurable clock source
Breadboard area for custom circuits
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
5R+6
COMPLIANT
Introduction
Serial Comm. Cards
The PCL-720+ digital I/O and counter card is PC-compatible add-on cards with 32 digital input channels, 32 digital output channels and three programmable counter/timer channels.
Their digital I/O channels are TTL-compatible and use 74LS244 driver/ buffer circuits to provide high output driving capacity. These buffered circuits also require lower input loading
current than regular TTL circuits. The cards' 8254 programmable counter/timer provides three flexible 16-bit counter/timer channels. You can generate waves and pulses by programming
Video Surveillance
the 8254. Jumper settings determine the clock crystal frequency. The cards also includes a breadboard area perfect for customized circuits.
Specifications
Pre-Configured Systems
General
Digital Input
Channels
Compatibility
Input Voltage
Breadboard Area
32
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
Channels
Compatibility
Output Voltage
Output Capability
32
5 V/TTL
Logic 0: 0.5 V max.
Logic 1: 2.0 V min.
Sink: 0.5 V max. @ 24 mA
Source: 2.0 V min. @ 15 mA
Embedded IPCs
Ordering Information
Counter/Timer
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
Internal:
External Clock Frequency:
Programmable Counter
Modes
540 (30 x 18) plated-through "donuts", each with a
IPC Chassis
.036" hole on 0.10" centers. Further, provide 5 V on the
left side, and provide GND on the right side
Bus Type
ISA
SBCs and Backplanes
I/O Connectors
5 x 20-pin box header
Dimensions (L x H)
185 x 100 mm (7.3" x 4")
Power Consumption
5 V @ 500 mA
Industrial Motherboards
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storage Temperature
-20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
3
16 bits
5 V/TTL
1 MHz
Selectable 1 MHz, 100 kHz, or 10 kHz base clock
Jumper selectable divider: x2, x1, x0.5, and x0.25
6
PCL-720+
PCL-10120-1
PCL-10120-2
PCLD-780
PCLD-782
PCLD-785
PCLD-786
PCLD-885
ADAM-3920
64-ch Digital I/O and Counter ISA Card
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
Screw Terminal Board w/ Two 20-pin Flat Cables
16-ch Isolated DI Board w/ 1 m 20-pin Flat Cable
16-ch Relay Board w/ One 1 m 20-pin Flat Cable
8-ch SSR I/O Module Board w/ 20-pin Flat Cable
16-ch Power Relay Board w/ 20p & 50p Flat Cables
20-pin DIN-rail Flat Cable Wiring Board
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-53
PCL-722
144-ch Digital I/O ISA Card
Features
Emulates 8255 PPI mode 0
Buffered circuits for higher driving capacity than the 8255
Interrupt handling capability
Output status readback
Pin compatible with Opto-22 I/O module racks
5R+6
COMPLIANT
Specifications
Ordering Information
Digital Input
Channels
Compatibility
Input Voltage
Interrupt Capable Ch.
144 (24 channels x 6 ports) shared with output
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Bits 0 and 3 of Port C can generate an interrupt to IRQ
2, 3, 4, 5, 6 or 7
Port C
Output Capability
Port A, B
Port C
144 (24 channels x 6 ports) shared with input
5 V/TTL
Logic 0: 0.5 V max.
Logic 1: 2.4 V min.
Logic 0: 0.4 V max.
Logic 1: 2.0 V min.
Sink: 12 mA
Source: 8 mA
Sink: 24 mA
Source: 15 mA
General
Bus Type
Power Consumption
ISA
Typical: 5 V @ 1.3 A
Max.: 5 V @ 1.8 A
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Operating Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
I/O Connectors
6 x 50-pin box header
Dimensions (L x H)
334 x 100 mm (13.2" x 3.9")
16-54
PCL-722
PCL-10150-1.2
PCLD-782B
PCLD-785B
PCLD-7216
PCLD-885
ADAM-3950
144-ch Digital I/O ISA Card
50-pin Flat Cable, 1.2 m
24-ch IDI Board w/ 20-pin & 50-pin Flat Cables
24-ch Relay Board w/ 20-pin & 50-pin Flat Cables
16-ch SSR I/O Module Carrier Board
16-ch Power Relay Board w/ 20p & 50p Flat Cables
50-pin DIN-rail Flat Cable Wiring Board
Pin Assignments
Digital Output
Channels
Compatibility
Output Voltage
Port A, B
Data Acquisition Boards
PCL-724
PCL-731
24-ch Digital I/O ISA Card
48-ch Digital I/O ISA Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
24 TTL digital I/O channels for PCL-724 and 48 TTL digital I/O channels for
PCL-731
Emulates mode 0 of 8255 PPI
Interrupt handling capability
Opto-22 compatible 50-pin connectors
Output status readback
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
PCL-724
PCL-731
Device Servers
5R+6
COMPLIANT
Specifications
Ordering Information
Digital Input
Channels
Compatibility
Input Voltage
Interrupt Capable Ch.
PCL-724: 24 (shared with output)
PCL-731: 48 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
PCL-724: 1
PCL-731: 2
Compatibility
Output Voltage
Output Capability
24-ch Digital I/O ISA Card
48-ch Digital I/O ISA Card
50-pin Flat Cable, 1.2 m
24-ch IDI Board w/ 20-pin & 50-pin Flat Cables
24-ch Relay Board w/ 20-pin & 50-pin Flat Cables
16-ch SSR I/O Module Carrier Board
16-ch Power Relay Board w/ 20p & 50p Flat Cables
50-pin DIN-rail Flat Cable Wiring Board
Pin Assignments
Digital Output
Channels
PCL-724
PCL-731
PCL-10150-1.2
PCLD-782B
PCLD-785B
PCLD-7216
PCLD-885
ADAM-3950
PCL-724: 24 (shared with input)
PCL-731: 48 (shared with input)
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 0.4 V max. @ 24 mA
Source: 2.4 V min. @ 15 mA
Pre-Configured Systems
IPC Chassis
Industrial Motherboards
Embedded IPCs
Bus Type
I/O Connectors
Video Surveillance
SBCs and Backplanes
General
Serial Comm. Cards
ISA
PCL-724: 1 x DB50 female connector
PCL-731: 2 x 50-pin box header
Dimensions (L x H)
PCL-724: 125 x 100 mm (4.9" x 3.9")
PCL-731: 185 x 100 mm (7.3" x 3.9")
Power Consumption
Typical: 5 V @ 0.5 A
Max.: 5 V @ 0.8 A
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
*Note: CN2 is only for PCL-731
Online Download www.advantech.com/products
16-55
32-ch Isolated Digital I/O
Universal PCI Card
PCI-1730U
PCI-1733
PCI-1734
32-ch Isolated Digital Input PCI Card
32-ch Isolated Digital Output PCI Card
Features
ISA-compatible with PCL-730/733/734
32-ch isolated DI/O (16-ch digital input, 16-ch digital output)
32-ch TTL DI/O (16-ch digital input,16-ch digital output) (PCI-1730U only)
High output driving capacity
Interrupt handling capability
2 x 20-pin connectors for isolated DI/O channels and 2 for TTL DI/O channels
D-type connector for isolated input and output channels
High-voltage isolation on output channels
PCI-1730U
PCI-1733
PCI-1734
5R+6
COMPLIANT
Introduction
PCI-1730U, PCI-1733, and PCI-1734 offer isolated digital input channels as well as isolated digital output channels with isolation protection up to 2,500 VDC, which makes them ideal
for industrial applications where high-voltage isolation is required. There are also 32 TTL digital I/O channels on PCI-1730U.
Specifications
Digital Input (PCI-1730U only)
General
Channels
Compatibility
Input Voltage
Bus Type
I/O Connectors
16 (16-ch/group)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
2 (DI0, DI1)
Interrupt Capable Ch.
Isolated Digital Input
Channels
Input Voltage
16 (16-ch/group)
Logic 0: 1 V max. (2 V max.)
Logic 1: 5V min. (30 V max.)
Interrupt Capable Ch. 2 (IDI0, IDI1)
Isolation Protection
2,500 VDC
Opto-Isolator Response 25 μs
Input Resistance
2.7 kΩ @ 1 W
Digital Output (PCI-1730U only)
Channels
Compatibility
Output Voltage
16 (16-ch/group)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 24 mA
Source: 15 mA
Output Capability
Isolated Digital Output
16-56
Channels
Output Type
Isolation Protection
Output Voltage
Sink Current
Opto-Isolator Response
16 (16-ch/group)
Sink type (NPN)
2,500 VDC
5 ~ 40 VDC
300 mA max./channel
25 μs
Data Acquisition Boards
PCI V2.2 (Universal PCI V2.2 for PCI-1730U)
1 x DB37 female connector
4 x 20-pin box header (1730U only)
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 250 mA, 12 V @ 35 mA
Max.: 5 V @ 400 mA, 12 V @ 60 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storage Temperature -25 ~ 85° C (-13 ~ 185° F)
Storage Humidity
5 ~ 95% RH, non-condensing (see IEC 68-2-3)
Ordering Information
PCI-1730U
PCI-1733
PCI-1734
PCL-10120-1
PCL-10120-2
PCLD-782
ADAM-3920
PCLD-885
PCLD-780
PCLD-785
PCLD-786
PCLD-880
ADAM-3937
PCL-10137-1
PCL-10137-2
PCL-10137-3
32-ch Isolated Digital I/O Univ. PCI Card
32-ch Isolated Digital Input PCI Card
32-ch Isolated Digital Output PCI Card
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
16-ch Isolated DI Board w/ 1m 20-pin Flat Cable
20-pin DIN-rail Flat Cable Wiring Board
16-ch Power Relay Board w/ 20p & 50p Flat Cables
Screw Terminal Board w/ Two 20-pin Flat Cables
16-ch Relay Board w/ One 1m 20-pin Flat Cable
8-ch SSR I/O Module Board w/ 20-pin Flat Cable
Wiring Board w/ Two 20-pin Flat Cables & Adapter
DB37 DIN-rail Wiring Board
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
PCI-1750
32-ch Isolated Digital I/O and
3-ch Counter PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
16 isolated DI and 16 isolated DO channels
High voltage isolation on all isolated channels (2,500 VDC)
High sink current on isolated output channels (200 mA/channel)
Supports dry contact or 5 ~ 50 VDC isolated inputs
Interrupt handling capability
Timer/counter interrupt capability
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
5R+6
COMPLIANT
Introduction
Serial Comm. Cards
PCI-1750 offers 16 isolated digital input channels, 16 isolated digital output channels, and one isolated counter/timer for the PCI bus. With isolation protection of 2,500 VDC, and dry
contact support, PCI-1750 is ideal for industrial applications where high-voltage protection is required. Each I/O channel of the PCI-1750 corresponds to a bit in a PC I/O port. This
makes PCI-1750 very easy to program. This card also offers a counter or timer interrupt and two digital input interrupt lines to a PC. So you can then easily do configurations by software.
Specifications
Video Surveillance
Pre-Configured Systems
Isolated Digital Input
Channels
Input Voltage
16
Logic 0: 2 V max.
Logic 1: 5 V min. (50 VDC max.) or dry contact
Interrupt Capable Ch. 2
Isolation Protection
2,500 VDC
Opto-Isolator Response 100 μs
Isolated Digital Output
Channels
Output Type
Isolation Protection
Output Voltage
Sink Current
Opto-Isolator Response
16
Sink (NPN)
2,500 VDC
5 ~ 40 VDC
200 mA max. per channel
100 μs
Storage Temperature
Storage Humidity
-20 ~ 80° C (-4 ~ 176° F)
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Ordering Information
PCI-1750
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
32-ch Isolated Digital I/O and Counter PCI Card
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
Pin Assignments
Compatibility
Max. Input Frequency
Isolation Protection
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
Counter/Timer
Channels
Resolution
IPC Chassis
1
1 x 32-bit timer
1 x 16-bit isolated counter
5 V/TTL
1 MHz
2,500 VDC
IPC Peripherals
DAQ
General
Signal Conditioning
Bus Type
I/O Connectors
PCI V2.2
1 x DB37 female connector
1 x 2-pin terminal block for extended ground
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 850 mA
Max.: 5 V @ 1.0 A
Operating Temperature 0 ~ 70° C (32 ~ 158° F)
USB DAQ
Online Download www.advantech.com/products
16-57
64-ch Isolated Digital Output
Universal PCI Card
PCI-1752U
PCI-1754
PCI-1756
64-ch Isolated Digital Input PCI Card
64-ch Isolated Digital I/O PCI Card
5R+6
PCI-1752U
5R+6
PCI-1756
COMPLIANT
COMPLIANT
Features
Features
Features
64 isolated digital input channels
Either ± voltage input for DI by group
Either ± voltage input for DI by group
Output status readback
High-voltage isolation on input channels (2,500 VDC)
Keeps the output settings and values after system
hot reset
64 isolated digital output channels
High-voltage isolation on output channels (2,500 VDC)
2,000 VDC ESD protection
Wide output range (5 ~ 40 VDC)
High-sink current on isolated output channels
(200 mA max./channel)
Output status readback
Keeps the output settings and values after system hot
reset
Channel-freeze function
High-density 100-pin SCSI connector
Support sink
High over-voltage protection (70 VDC)
Wide input range (10 ~ 50 VDC)
Interrupt handling capability
Specifications
Isolated Digital Output
Isolated Digital Input
Channels
Output Type
Isolation Protection
Output Voltage
Sink Current
Opto-isolator
Response
64 (16-ch/group)
Sink (NPN)
2,500 VDC
5 ~ 40 VDC
200 mA max./channel
Bus Type
I/O Connectors
Universal PCI V2.2
1 x 100-pin SCSI female
connector
Dimensions (L x H) 175 x 100mm (6.9" x 3.9")
Power Consumption Typical: 5 V @ 230 mA
Max.: 5 V @ 500 mA
Operating
0 ~ 60° C (32 ~ 140° F)
Temperature
(IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95% RH, (IEC 68-2-3)
non-condensing
Ordering Information
PCI-1752U
PCL-10250-1
ADAM-3951
64-ch Isolated Digital
Output Universal PCI Card
100-pin SCSI to Two 50pin SCSI Cable, 1 m
50-pin DIN-rail Wiring
Board w/ LED Indicators
64 (16-ch/group)
Logic 0: 3 V max.
Logic 1: 10 V min.
(50 V max.)
Input Current
10 VDC @ 1.7 mA,
(Typical)
12 VDC @ 2.1 mA
24 VDC @ 4.4 mA,
48 VDC @ 9.0 mA
50 VDC @ 9.4 mA
Interrupt Capable Ch. 4
Isolation Protection 2,500 VDC
Overvoltage
Protection
70 VDC
ESD
2,000 VDC
Opto-Isolator
25 μs
Response
General
Bus Type
I/O Connectors
PCI V2.2
1 x 100-pin SCSI female
connector
Dimensions (L x H) 175 x 100mm (6.9" x 3.9")
Power Consumption Typical: 5 V @ 340 mA
Max.: 5 V @ 450 mA
Operating
0 ~ 60° C (32 ~ 140° F)
Temperature
(IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95% RH (IEC 68-2-3)
non-condensing
Ordering Information
PCI-1754
PCL-10250-1
ADAM-3951
Data Acquisition Boards
High-density 100-pin SCSI connector
Specifications
Isolated Digital Input
Channels
Input Voltage
25 μs
General
Interrupt handling capability
High-density 100-pin SCSI connector
Specifications
16-58
5R+6
PCI-1754
COMPLIANT
64-ch Isolated Digital Input
PCI Card
100-pin SCSI to Two 50-pin
SCSI Cable, 1 m
50-pin DIN-rail Wiring
Board w/ LED Indicators
Channels
Input Voltage
32 (16-ch/group)
Logic 0: 3 V max.
Logic 1: 10 V min. (50 V max.)
Interrupt Capable Ch. 2 (IDI0, IDI16)
Isolation Protection
2,500 VDC
Overvoltage Protection 70 VDC
ESD
2,000 VDC
Opto-Isolator Response 25 μs
Input Current
10 VDC @ 1.7 mA,
12 VDC @ 2.1 mA
24 VDC @ 4.4 mA,
48 VDC @ 9.0 mA
50 VDC @ 9.4 mA
Isolated Digital Output
Channels
Output Type
Isolation Protection
Output Voltage
Sink Current
Opto-isolator Response
32 (16-ch/group)
Sink (NPN)
2,500 VDC
5 ~ 40 VDC
200 mA max./channel
25 μs
General
Bus Type
I/O Connectors
PCI V2.2
1 x 100-pin SCSI female
connector
Dimensions (L x H)
175 x 100mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 285 mA
Max.: 5 V @ 475 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
(IEC 68-2-1, 2)
Storage Temperature
-20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95 % (IEC 68-2-3)
non-condensing
Ordering Information
PCI-1756
PCL-10250-1
ADAM-3951
64-ch Isolated Digital I/O PCI
Card
100-pin SCSI to Two 50-pin
SCSI Cable, 1 m
50-pin DIN-rail Wiring Board
w/ LED Indicators
128-ch Isolated Digital Input
Universal PCI Card
128-ch Isolated Digital Output
Universal PCI Card
128-ch Isolated Digital I/O
Universal PCI Card
PCI-1758UDI
PCI-1758UDO
PCI-1758UDIO
Features
PCI-1758UDO and PCI-1758UDIO
128 isolated digital output channels (64 channels for PCI-1758UDIO)
High-voltage isolation on output channels (2,500 VDC)
Wide output range (5 ~ 40 VDC)
High-sink current for isolated output channels (90 mA max./channel)
Current protection for each port
BoardID™ switch
Output status read-back
Digital output value retained after hot system reset
Programmable Power-up States
Watchdog timer
PCI-1758UDI
PCI-1758UDO
PCI-1758UDI and PCI-1758UDIO
128 isolated digital input channels (64 channels for PCI-1758UDIO)
Wide input range (5 ~ 25 VDC)
High ESD protection (2,000 VDC)
Digital Filter function
BoardID™ switch
Interrupt handling capability for each channel
PCI-1758UDIO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
5R+6
COMPLIANT
Specifications
Feature Details
Isolated Digital Input
Interrupt Function (PCI-1758UDI/PCI-1758UDIO)
Channels
PCI-1758UDI and PCI-1758UDIO provide an interrupt function for every digital input
channel. You can disable/enable the interrupt functions, and select trigger type by setting Video Surveillance
the Rising Edge Interrupt Registers or Falling Edge Interrupt Registers of the card. When
the interrupt request signals occur, software will service these interrupt requests by ISR.
The multiple interrupt sources provide the card with more flexibility.
Pre-Configured Systems
PCI-1758UDI: 128
PCI-1758UDIO: 64
Input Voltage
Logic 0: 2.5 V max.
Logic 1: 5 V min. (25 V max.)
Interrupt Capable Ch. PCI-1758UDI: 128
PCI-1758UDIO: 64
Isolation Protection
2,500 VDC
Opto-Isolator Response 20 μs
Input Resistance
3 kΩ
Digital Filter Function (PCI-1758UDI/PCI-1758UDIO)
The digital filter function is used to eliminate glitches on input data and reduce the IPC Chassis
number of changes to examine and process. The filter blocks pulses that are shorter than
the specified timing interval and passes pulses that are twice as long as the specified
interval. Intermediate-length pulses that are longer than half of the interval, but less than
SBCs and Backplanes
the interval, may or may not pass the filter depending on your settings.
Isolated Digital Output
Channels
PCI-1758UDO: 128
PCI-1758UDIO: 64
Output Type
Sink (NPN)
Isolation Protection
2,500 VDC
Output Voltage
5 ~ 40 VDC
Sink Current
90 mA max./channel
Opto-isolator Response 20 μs
Pin Assignments
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Typical
Max.
Universal PCI V2.2
1 x mini-SCSI HDRA-E100 female connector
175 x 100 mm (6.9" x 3.9")
PCI-1758UDI
5 V @ 0.3 A
5 V @ 0.6 A
PCI-1758UDO
5 V @ 1.1 A
5 V @ 2.2 A
PCI-1758UDIO
5 V @ 1.2 A
5 V @ 1.8 A
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95 % (IEC 68-2-3) non-condensing
Ordering Information
PCI-1758UDI
PCI-1758UDO
PCI-1758UDIO
PCL-101100S-1
PCL-101100S-2
ADAM-39100
Industrial Motherboards
CNB
General
Serial Comm. Cards
128-ch Isolated DI Universal PCI Card
128-ch Isolated DO Universal PCI Card
128-ch Isolated Digital I/O Universal PCI Card
100-pin SCSI Cable, 1 m
100-pin SCSI Cable, 2 m
100-pin DIN-rail SCSI Wiring Board
PEF_COMM
PEF_COMM
PF_IDI07
PF_IDI06
PF_IDI05
PF_IDI04
PF_IDI03
PF_IDI02
PF_IDI01
PF_IDI00
PE_IDI07
PE_IDI06
PE_IDI05
PE_IDI04
PE_IDI03
PE_IDI02
PE_IDI01
PE_IDI00
NC
NC
NC
NC
NC
NC
NC
NC
PCD_COMM
PCD_COMM
PD_IDI07
PD_IDI06
PD_IDI05
PD_IDI04
PD_IDI03
PD_IDI02
PD_IDI01
PD_IDI00
PC_IDI07
PC_IDI06
PC_IDI05
PC_IDI04
PC_IDI03
PC_IDI02
PC_IDI01
PC_IDI00
NC
NC
NC
NC
NC
NC
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CNA
PAB_COMM
PAB_COMM
PB_IDI07
PB_IDI06
PB_IDI05
PB_IDI04
PB_IDI03
PB_IDI02
PB_IDI01
PB_IDI00
PA_IDI07
PA_IDI06
PA_IDI05
PA_IDI04
PA_IDI03
PA_IDI02
PA_IDI01
PA_IDI00
NC
NC
NC
NC
NC
NC
NC
NC
P89_COMM
P89_COMM
P9_IDI07
P9_IDI06
P9_IDI05
P9_IDI04
P9_IDI03
P9_IDI02
P9_IDI01
P9_IDI00
P8_IDI07
P8_IDI06
P8_IDI05
P8_IDI04
P8_IDI03
P8_IDI02
P8_IDI01
P8_IDI00
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
P0_IDI00
P0_IDI01
P0_IDI02
P0_IDI03
P0_IDI04
P0_IDI05
P0_IDI06
P0_IDI07
P1_IDI00
P1_IDI01
P1_IDI02
P1_IDI03
P1_IDI04
P1_IDI05
P1_IDI06
P1_IDI07
P01_COMM
P01_COMM
NC
NC
NC
NC
NC
NC
NC
NC
P2_IDI00
P2_IDI01
P2_IDI02
P2_IDI03
P2_IDI04
P2_IDI05
P2_IDI06
P2_IDI07
P3_IDI00
P3_IDI01
P3_IDI02
P3_IDI03
P3_IDI04
P3_IDI05
P3_IDI06
P3_IDI07
P23_COMM
P23_COMM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
NC
NC
NC
NC
NC
NC
P4_IDI00
P4_IDI01
P4_IDI02
P4_IDI03
P4_IDI04
P4_IDI05
P4_IDI06
P4_IDI07
P5_IDI00
P5_IDI01
P5_IDI02
P5_IDI03
P5_IDI04
P5_IDI05
P5_IDI06
P5_IDI07
P45_COMM
P45_COMM
NC
NC
NC
NC
NC
NC
NC
NC
P6_IDI00
P6_IDI01
P6_IDI02
P6_IDI03
P6_IDI04
P6_IDI05
P6_IDI06
P6_IDI07
P7_IDI00
P7_IDI01
P7_IDI02
P7_IDI03
P7_IDI04
P7_IDI05
P7_IDI06
P7_IDI07
P67_COMM
P67_COMM
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
PCI-1758UDI
Online Download www.advantech.com/products
16-59
PCI-1760U
8-ch Relay and 8-ch Isolated Digital Input
Universal PCI Card with 10-ch Counter/Timer
Features
Universal PCI card, for 3.3 V and 5 V PCI slot
8 opto-isolated digital input channels
8 relay actuator output channels
2 opto-isolated PWM outputs
LED indicators to show activated relays
Jumper selectable dry contact/wet contact input signals
Up event counters for DI
Programmable digital filter function for DI
Pattern match interrupt function for DI
"Change of state" interrupt function for DI
Universal PCI and BoardID switch
5R+6
COMPLIANT
Introduction
PCI-1760U relay actuator and isolated digital input card is a PC add-on card for the PCI bus. It meets the PCI standard Rev. 2.2 (Universal PCI expansion card), and works with both
3.3 V and 5 V PCI slots. It provides 8 opto-isolated digital inputs with isolation protection of 2,500 VDC for collecting digital inputs in noisy environments, 8 relay actuators that can
be used as a on/off control devices or small power switches, and 2 isolated PWM (Pulse Width Modulation) outputs for custom applications.
For easy monitoring, each relay is equipped with one red LED to show its on/off status. Each isolated input supports both dry contact and wet contact so that it can easily interface
with other devices when no voltage is present in the external circuit.
Specifications
Isolated Digital Input
General
Channels
Input Voltage
8 (Sink)
Logic 0: 1.0 V max.
Logic 1: 4.5 V min. (12 V max.)
Interrupt Capable Ch. 8 (IDI0 ~ IDI7)
Isolation Protection
2,500 VDC
Opto-Isolator Response 25 μs
Input Resistance
2 kΩ 1/4 W
Counter/Timer
Channels
Resolution
Compatibility
Max. Input Frequency
Isolation Protection
PWM Channels
Digital Noise Filter
8
16 bits
5 V/TTL
500 Hz
2,500 VDC
2
Min. effective high input period ≥ [(2 ~ 65535) x 5 ms]
+ 5 ms
Min. effective low input period ≥ [(2 ~ 65535) x 5 ms]
+ 5 ms
Relay Output
Channels
Relay Type
Contact Rating
Relay on Time
Relay off Time
Life Span
Resistance
16-60
8
2 x Form C, and 6 x Form A
120 VDC @ 0.5 A, or 30 VDC @ 1 A
5 ms max.
5 ms max.
200,000 operations @ 0.5 A 120 VAC
500,000 operations @ 1.0 A 30 VDC
Contact: < 100 mΩ
Insulation: 50 MΩ
Data Acquisition Boards
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
1 x DB37 female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 450 mA
Max.: 5 V @ 850 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (IEC 68 - 2 - 1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95 % RH, non-condensing (IEC 68-2-3)
Ordering Information
PCI-1760U
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
8-ch Relay/IDI PCI Card w/ 10-ch Counter/Timer
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
PCI-1761
8-ch Relay and 8-ch Isolated Digital
Input PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
ISA-Compatible with PCL-725
8 relay output channels and 8 isolated digital input channels
LED indicators to show activated relays
4 Form C and 4 Form A type relay output channels
Male DB37 matching connector included
Output status readback
Retained relay output values when hot system reset
High-voltage isolation on input channels (3,750 VDC)
High ESD protection (2,000 VDC)
High over-voltage protection (70 VDC)
Wide input range (10 ~ 50 VDC)
Interrupt handling capability
BoardID™ switch
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
5R+6
COMPLIANT
Introduction
Serial Comm. Cards
The PCI-1761 relay actuator and isolated DI card is an add-on card for the PCI bus. It provides 8 optically-isolated digital inputs with isolation protection of 3,750 VDC for collecting
digital inputs in noisy environments and 8 relay actuators for serving as on/off control devices or small power switches. For easy monitoring, each relay is equipped with one red LED
to show its on/off status. The PCI-1761’s eight optically-isolated digital input channels are ideal for digital input in noisy environments or with floating potentials.
The PCI-1761 digital input channels feature a rugged isolation protection for industrial, lab and machinery automation applications. It durably withstands voltage up to 3,750 VDC,
protecting your host system from any incidental harms. If connected to an external input source with surge-protection, the PCI-1761 can offer up to a maximum of 2,000 VDC ESD
(Electrostatic Discharge) protection. Even with an input voltage rising up to 70 VDC, the PCI-1761 can still manage to work properly, albeit for only a short period of time.
Video Surveillance
Pre-Configured Systems
Specifications
IPC Chassis
Isolated Digital Input
General
Channels
Input Voltage
8
Logic 0: 3 V max.
Logic 1: 5 V min. (50 V max.)
Interrupt Capable Ch. 8
Isolation Protection
3,750 VDC
Overvoltage Protection 70 VDC
Opto-Isolator Response 25 μs
Input Resistance
5,600 Ω
Input Current
1.6 mA @ 10 VDC, 8.9 mA @ 50 VDC
Channels
Relay Type
Contact Rating
Relay on Time
Relay off Time
Life Span
Resistance
PCI V2.2
1 x DB37 female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 220 mA
Max.: 5 V @ 750 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95 % RH, non-condensing (IEC 68-2-3)
Ordering Information
Relay Output
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
8
SPDT (4 x Form C and 4 x Form A)
250 VAC @ 3 A, or 24 VDC @ 3 A
15 ms max.
5 ms max.
2 x 107 operations
Contact: 50 mΩ
Insulation: 1 GΩ min.
PCI-1761
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
PCLD-880
8-ch Relay/Isolated Digital Input PCI Card
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
Wiring Board w/ Two 20-pin Flat Cables & Adapter
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-61
PCI-1762
16-ch Relay and 16-ch Isolated
Digital Input PCI Card
Features
16 relay output channels and 16 isolated digital input channels
LED indicators to show activated relays
Jumper selectable Form A/Form B-type relay output channel
Output status readback
Retain relay output values when hot system reset
High-voltage isolation on input channels (2,500 VDC)
High ESD protection (2,000 VDC)
High over-voltage protection (70 VDC)
Wide input range (10 ~ 50 VDC)
Interrupt handling capability
High-density DB62 connector
BoardID™ switch
5R+6
COMPLIANT
Introduction
The PCI-1762 relay actuator and isolated DI card is a PC add-on card for the PCI bus. It provides 16 opto-isolated digital inputs with isolation protection of 2,500 VDC for collecting
digital inputs in noisy environments, 16 relay actuators for serving as on/off control devices or small power switches. For easy monitoring, each relay is equipped with one red LED
to show its on/off status. The PCI-1762’s sixteen optically-isolated digital input channels are ideal for digital input in noisy environments or with floating potentials.
Ordering Information
Specifications
Isolated Digital Input
Channels
Input Voltage
16
Logic 0: 3 V max.
Logic 1: 10 V min. (50 V max.)
Interrupt Capable Ch. 2
Isolation Protection
2,500 VDC
Overvoltage Protection 70 VDC
Opto-Isolator Response 25 μs
Input Resistance
4.7 KΩ
Relay Output
Channels
Relay Type
Contact Rating
Relay on Time
Relay off Time
Life Span
Resistance
16
SPDT (Form A or Form B, jumper selectable)
0.5 A @ 125 VAC or 1 A @ 30 VDC
6 ms max.
4 ms max.
2 x 105 ops. min. (0.5 A @ 125 VAC),
5 x 105 ops. min. (1 A @ 30 VDC)
Contact: 50 mΩ
Insulation: 1,000 MΩ min. (at 500 VDC)
General
PCI V2.2
1 x DB62 female connector
175 x 100 mm (69" x 3.9")
Typical: 5 V @ 250 mA
Max.: 5 V @ 620 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 - 95 % non-condensing (IEC 68-2-3)
16-62
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Data Acquisition Boards
PCI-1762
PCL-10162-1
PCL-10162-3
ADAM-3962
16-ch Relay/Isolated Digital Input PCI Card
DB62 Cable, 1 m
DB62 Cable, 3 m
DB62 DIN-rail Wiring Board
Pin Assignments
PCL-725
8-ch Relay and 8-ch
Isolated Digital Input ISA Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
8 x relay output channels and 8 x isolated digital input channels
LED indicators to show activated relays
4 x Form C and 4 x Form A type relay output channels
Male DB37 matching connector included
Output status readback
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
5R+6
COMPLIANT
Introduction
Serial Comm. Cards
The PCL-725 relay actuator and isolated digital input card offers 8 relay actuators and 8 opto-isolated digital inputs on a single board.Typically, the onboard relays can serve as on/
off control devices or small power switches. The 8 x opto-isolated DI channels are ideal devices for collecting digital inputs under noisy environment or floating potential. Also, the
8 x isolated inputs provide the best method to prevent any ground loop problems.
For easy monitoring, each relay is equipped with one red LED to reflect its on/off status. Each input channel is jumper selectable to either isolated or non-isolated input. Access to
input and output channels is made possible through an onboard 37-pin D type connector.
Video Surveillance
Pre-Configured Systems
Specifications
Isolated Digital Input
Channels
Input Voltage
Isolation Protection
Input Resistance
Input Current
General
8
5 ~ 24 VDC
1,500 VDC
560 Ω
60 mA max.
Non-isolated Digiteal Input
Channels
Input Voltage
8 (Jumper-selectable)
Logic 0: 0.8 V max.
Logic 1: 2.0 V min. (5.25 V max.)
Relay Output
Channels
Relay Type
Contact Rating
Relay on Time
Relay off Time
Life Span
Resistance
8
SPDT (4 x Form C and 4 x Form A)
120 VAC @ 0.5 A, or 30 VDC @ 1 A
8 ms max.
8 ms max.
1 x 107 operations
Contact:
50 mΩ
Insulation:
100 MΩ min.
IPC Chassis
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
ISA
1 x DB37 female connector
147 x 100 mm (5.75" x 3.9")
5 V @ < 0.2 A; 12 V @ 33 mA for each relay
< 0.27 A if all eight relays are energized
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95 % RH, non-condensing (IEC 68-2-3)
Ordering Information
PCL-725
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
PCLD-880
8-ch Relay/Isolated Digital Input ISA Card
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
Wiring Board w/ Two 20-pin Flat Cables & Adapter
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-63
PCL-735
12-ch Relay ISA Card
Features
12 relay outputs
LED indicators to show activated relays
Male DB37 matching connector included
Output status readback
5R+6
COMPLIANT
Introduction
Ideal for applications such as on/off control or signal switching, the PCL-735 12-channel relay actuator provides 12 SPDT relays on a half-size card. The on/off status of each relay is
easy to monitor. A red LED next to each relay shows its on/off status, and the software can read each relay’s status. An onboard DB-37 connector provides access to all output channels.
Specifications
Ordering Information
Relay Output
Channels
Relay Type
Contact Rating
Relay on Time
Relay off Time
Life Span
Resistance
12
SPDT, Form C
2 A @ 30 VDC, 1 A @ 125 VAC
5 ms typical
5 ms typical
> 5 x 105 operations @ 30 VDC and 2 A
> 2 x 106 operations @ 30 VDC and 1 A
Contact: 50 mΩ
Insulation: 1 GΩ @ 500 VDC min.
General
ISA
1 x DB37 female connector
155 x 100 mm (6.1" x 3.9")
Typical: 5 V @ 280 mA
Max.: 12 V @ 200 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
16-64
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Data Acquisition Boards
PCL-735
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
PCLD-880
12-ch Relay ISA Card
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
Wiring Board w/ Two 20-pin Flat Cables & Adapter
Pin Assignments
PCI-1780U
8-ch, 16-bit Counter/Timer Universal
PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
8 independent 16-bit counters
8 programmable clock source
8 digital TTL outputs and 8 digital TTL inputs
Up to 20 MHz input frequency
Multiple counter clock source selectable
Counter output programmable
Counter gate function
Flexible interrupt source select
BoardID™ switch
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
5R+6
COMPLIANT
Introduction
Serial Comm. Cards
PCI-1780U is a general purpose multi-channel counter/timer card for the PCI bus. It targets the AM9513 to implement the counter/timer function by CPLD. It provides eight 16-bit
counter channels, 8 digital outputs and 8 digital inputs. Its powerful counter functions cater to a broad range of industrial and laboratory applications.
The card features 12 programmable counter modes, to provide one shot output, PWM output, periodic interrupt output, time-delay output, and to measure the frequency and the pulse Video Surveillance
width. The PCL-10168 shielded cable works well with PCI-1780U to reduce noise. Its wires are all twisted pairs, and the input signals and output signals are separately shielded,
providing minimal cross talk between signals and the best protection against EMI/EMC problems.
Pre-Configured Systems
Specifications
Digital Input
Channels
Compatibility
Input Voltage
Interrupt Capable Ch.
General
8
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Ch. 0
Digital Output
Channels
Compatibility
Output Voltage
Output Capability
8
5 V/TTL
Logic 0: 0.8 V
Logic 1: 2.0 V
Sink: 24 mA @ 0.8 V
Source: -15 mA @ 2.0 V
Counter/Timer
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
Counter Modes
Interrupt Capable Ch.
PWM Channels
8 (independent)
16 bits
5 V/TTL
20 MHz
Internal: 20 MHz
External clock: 20 MHz max.
12 (programmable)
8
8
IPC Chassis
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 900 mA
Max.: 5 V @ 1.2 A
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95 % RH, non-condensing (IEC 68-2-3)
Ordering Information
PCI-1780U
PCL-10168-1
PCL-10168-2
ADAM-3968
8-ch, 16-bit Counter/Timer Universal PCI Card
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-65
PCL-836
6-ch, 16-bit Counter/Timer ISA Card
Features
Periodic interrupt generation
6 independent 16-bit counters
Digital filter for noise reduction
Binary or BCD counting
Programmable frequency output
Complex duty-cycle output
Single-shot output
16-bit TTL input and 16-bit TTL output ports
Selectable interrupt input channel
Up to 10 MHz input frequency
Pulsewidth and period measurement
Time-delay generation
F/V conversion and accumulation
5R+6
COMPLIANT
Introduction
PCL-836 is a general purpose counter/timer and digital I/O card for PC/AT compatible computers. It provides six 16-bit counter channels. It also includes 16 digital outputs and 16
digital inputs. Two 8254 chips provide a variety of powerful counter/timer function modes to match your industrial and/or laboratory applications.
Unique Digital Filter
PCL-836 includes a unique digital filter to eliminate noise on the input signal. The frequency can be adjusted to provide more stable output readings.
Specifications
Ordering Information
Digital Input
Channels
Compatibility
Input Voltage
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
Channels
Compatibility
Output Voltage
Output Capability
16
5 V/TTL
Logic 0: 0.8 V
Logic 1: 2.0 V
Sink: 8 mA @ 0.8 V
Source: -0.4 mA @ 2.0 V
Counter/Timer
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
Counter Modes
Interrupt Capable Ch.
PWM Channels
Digital Noise Filter
6
16 bits
5 V/TTL
10 MHz
Internal: 10 MHz
External clock: 10 MHz
6 programmable counter modes
IRQ 2, 4, 5, 7, 10, 11, 12, 15 (jumper selectable)
3
1.6 ms to 52 ms (programmable)
General
Power Consumption
Typical: 5 V @ 360 mA
Max.: 5 V @ 400 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Operating Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
Connector
1 x DB37 female connector for counter
2 x 20-pin box header for digital I/O
Dimensions (L x H)
185 x 100 mm (7.3" x 3.9")
16-66
Data Acquisition Boards
PCL-836
PCL-10137-1
PCL-10137-2
PCL-10137-3
ADAM-3937
PCLD-880
6-ch, 16-bit Counter/Timer ISA Card
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
Wiring Board w/ Two 20-pin Flat Cables & Adapter
Pin Assignments
PCI-1671UP
IEEE-488.2 Interface Low
Profile Universal PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
IEEE 488.2 Standard interface
Complete Talker/Listener/Controller
Industry standard 32-bit PCI bus
Data transfer rates over 1.5 MB/s
1,024-word FIFO buffer
Fanless Panel PCs
Panel Computers
High-Speed State Machine Bus Manager
7 Interrupt lines, shared interrupt capability
Transparent interrupt enabling/disabling
Includes GPIB-Library software
Low profile MD1 size
Display Solutions
Ethernet Switches
Device Servers
Introduction
Serial Comm. Cards
The PCI-1671UP IEEE-488 interface converts any PCI bus personal computer into an instrumentation control and data acquisition system. Connect up to 14 instruments using standard
IEEE-488 cables such as the PCL-10488-2, 2 meter IEEE-488 interface cable. The PCI-1671UP transfers data over the GPIB at rates in excess of 1.5 million bytes per second using
the maximum IEEE-488 specification cable length (2 meters times the # of devices). A 1,024-word FIFO buffer and the advanced REP-INSW ISR data transfer method provide the
Video Surveillance
horsepower required to then transfer the data between the GPIB board and the host computer. The high-speed state machine also provides byte-to-word packing and unpacking, and
because words carry twice the information that bytes do, packed data requires fewer bus cycles to transfer the same GPIB information.
The PCI-1671UP adheres to ANSI/IEEE Standard 488-1978. Often referred to as the IEEE-488.2 bus, GPIB bus or HP-IB bus, the GPIB (General Purpose Interface Bus) is a standard
for instrumentation communication and control for instruments from manufacturers the world over. The GPIB provides handshaking and interface communications over an 8-bit data Pre-Configured Systems
bus employing 5 control and 3 handshake signals. Equipped with PCI-1671UP, a personal computer can control GPIB instruments, gather data from GPIB test equipment, or become
a data acquisition station in a GPIB system.
IPC Chassis
Specifications
Ordering Information
GPIB
PCI-1671UP
PCL-10488-2
Compatibility
GPIB Transfer Rate
OS Support
Library Support
IEEE 488.1, 488.2
1.5 MB/s
Windows® 2000/XP
Visual C++, Visual C#, Visual Basic, Visual Basic .NET,
Delphi, LabView
Max. GPIB Connections 15
High-perform. IEEE-488.2 Interface PCI Card
IEEE-488 Cable, 2 m
General
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Operating Temperature
Storage Temperature
Operating Humidity
SBCs and Backplanes
Industrial Motherboards
Embedded IPCs
Mobile Computers
Universal PCI V2.2
1 x 24-pin IEEE 488
120 x 64 mm (Low profile MD1)
5 VDC @ 375 mA
0 ~ 60° C (32 ~ 158° F) @ 0-90% RH
-40 ~ 100° C (-40 ~ 212° F) @ 5-90% RH
0 ~ 90% RH, non-condensing
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
Online Download www.advantech.com/products
16-67
PCM-3810I
PCM-3813I
250 kS/s, 12-bit, 16-ch
Multifunction PCI-104 Module
100 kS/s, 12-bit, 32-ch Isolated
Analog Input PCI-104 Module
NEW
PCM-3810I
PCM-3813I
5R+6
COMPLIANT
5R+6
COMPLIANT
Specifications
Features
Analog Input
Channels
16 single-ended or 8 differential or combination
Resolution
12 bits
Max. Sampling Rate
250 kS/s
Ring Buffer Size
4,096 samples
Input Range and Gain List
Gain
Unipolar
Bipolar
0.5
N/A
±10
Input Protection
Sampling Mode
Trigger Mode
1
0 ~ 10
±5
2
0~5
±2.5
4
0 ~ 2.5
±1.25
8
0 ~ 1.25
±0.625
30 Vp-p
Polling, pacer, double-clock, or external TTL trigger
Pre-trigger, post-trigger, delay-trigger, about-trigger
Analog Output
Channels
Output Range
Resolution
Output Rate
Ring Buffer Size
Slew Rate
Operation Mode
2
Internal Reference (V): 0 ~ 5, 0 ~ 10, ±5, ±10
External Reference: 0 ~ +x V @ +x V (-10 ≤ x ≤ 10)
-x ~ +x V @ +x V (-10 ≤ x ≤ 10
12 bits
250 kS/s
4,096 samples
20 V/μs
Software polling, continuous out
Digital Input/Output
Channels
Compatibility
16
5V/TTL
Counter/Timer
Channels
Resolution
Compatibility
Max. Input Frequency
Counter Modes
Interrupt Capable Ch.
PWM Channels
32 single-ended or 16 differential analog inputs
Programmable gain for each input channel
Automatic channel/ gain/ SD scanning
Onboard ring buffer (1,024 samples)
Isolation protection (2,500 VDC)
BoardID™ switch
Specifications
Analog Input
Channels
32 single-ended or 16 differential or combination
Resolution
12 bits
Max. Sampling Rate
100 kS/s
Ring Buffer Size
1,024 samples
Input Range and Gain List
Gain
0.5
1
2
4
8
Unipolar
N/A
0 ~ 10
0~5
0 ~ 2.5
0 ~ 1.25
Bipolar
±10
±5
±2.5
±1.25
±0.625
Input Protect
Input Impedance
Sampling Mode
30 Vp-p
100 MΩ/10pF (off); 100 MΩ/100pF (on)
Software polling, onboard programmable pacer, or
external TTL trigger
16
24 bits
5 V/TTL
10 MHz
12 (programmable)
3
3
General
PCI-104
1 x 26-pin, 1 x 50-pin box header
96 x 90 mm (3.8" x 3.5")
0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
-20 ~ 70° C (-4 ~158° F)
Ordering Information
Bus Type
I/O Connectors
Dimensions (L x H)
Operating Temperature
Storage Temperature
PCI-104
1 x 40-pin box header
96 x 90 mm (3.8" x 3.5")
0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
-20 ~ 70° C (-4 ~158° F)
General
Bus Type
I/O Connectors
Dimensions (L x H)
Operating Temperature
Storage Temperature
Ordering Information
PCM-3810I
ADAM-3950
16-68
250 kS/s, 12-bit Multi. PCI-104 Module
50-pin DIN-rail Flat Cable Wiring Board
Data Acquisition Boards
PCM-3813I
ADAM-3937
100 kS/s, 12-bit Isolated AI PCI-104 Module
DB37 DIN-rail Wiring Board
PCM-3718H/HG/HO
PCM-3724
100 kS/s, 12-bit, 16-ch
Multifunction PC/104
Module
48-ch Digital I/O
PC/104 Module
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Fanless Panel PCs
Panel Computers
Display Solutions
Ethernet Switches
PCM-3718H/HG/HO
PCM-3724
5R+6
COMPLIANT
5R+6
COMPLIANT
Specifications
Features
Analog Input
Channels
Resolution
Max. Sampling Rate
Input Impedance
Sampling Modes
Input Range
PCM-3718H and
PCM-3718HO
PCM-3718HG
Bipolar
Unipolar
Bipolar
Unipolar
16 single-ended / 8 differential
12 bits
100 KHz* (DMA transfer)
*80 kHz on P4-based (or upper) system
10 MΩ
Software, pacer or external
Channels
Compatibility
Input Voltage
Internal Reference
External Reference (V)
Slew Rate
Output Impedance
1 (12 bits)
Unipolar (V)
Interrupt Capable Ch.
0 ~ 5, 0 ~ 10
0 ~10, 0 ~ -10
Channels
Compatibility
Output Voltage
Digital Input/Output
Channels
Input Voltage
Output Voltage
16, 5V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Logic 0: 0.33 V max. @ 6 mA
Logic 1: 3.84 V min. @ 6 mA
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
PC/104
2 x 20-pin box header
96 x 90 mm (3.8" x 3.5")
Typical: 5 V @ 180 mA
Max.: 5 V @ 400 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storage Temperature -40 ~ 85° C (-40 ~ 185° F)
PCM-3718H
PCM-3718HG
PCM-3718HO
ADAM-3920
PCLD-780
PCL-10120-1
PCL-10120-2
48 (shared with input)
5 V/TTL
Logic 0: 0.5 V max. @ 6 mA
Logic 1: 2.0 V min. @ -6 mA
100 kS/s, 12-bit Multi. PC/104 Module
100 kS/s, 12-bit High-gain Multi. PC/104 Module
100 kS/s, 12-bit Multi. PC/104 Module w/AO
20-pin DIN-rail Flat Cable Wiring Board
Screw Terminal Board w/ Two 20-pin Flat Cables
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
PCM-3724
ADAM-3950
PCLD-782B
PCLD-785B
PCL-10150-1.2
SBCs and Backplanes
Embedded IPCs
Mobile Computers
PC/104
2 x 50-pin box header
96 x 90 mm (3.8" x 3.5")
5 V @ 90 mA
0 ~ 60° C (32 ~ 140° F)
-40 ~ 85° C (-40 ~ 185° F)
Ordering Information
Ordering Information
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Operating Temperature
Storage Temperature
Pre-Configured Systems
Industrial Motherboards
General
General
48 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
2
Digital Output
10 V/μs
0.1 W max.
Video Surveillance
IPC Chassis
Digital Input
Analog Output (PCM-3718HO only)
Channels
Output Range
Serial Comm. Cards
48 TTL digital I/O lines
Supports dry contact and wet contact
Keeps the I/O port setting and DO state after system reset
Output status read-back
Channels simulate 8255 PPI mode 0
Interrupt triggering, rising/falling edge
Specifications
±10, ±5, ±2.5, ±1.25, ±0.625
0 ~ 10, 0 ~ 5, 0 ~ 2.5, 0 ~ 1.25
±10, ±5, ±1, ±0.5, ±0.1, ±0.05, ±0.01, ±0.005
0 ~ 10, 0 ~ 1, 0 ~ 0.1, 0 ~ 0.01
Device Servers
48-ch Digital I/O PC/104 Module w/ 50-pin Cable
50-pin DIN-rail Flat Cable Wiring Board
24-ch IDI Board w/ 20-pin & 50-pin Flat Cables
24-ch Relay Board w/ 20-pin & 50-pin Flat Cables
50-pin Flat Cable, 1.2 m
Online Download www.advantech.com/products
IPC Peripherals
DAQ
Signal Conditioning
USB DAQ
16-69
PCM-3725
PCM-3730
PCM-3780
8-ch Relay and Isolated Digital Input PC/104 Module
16-ch Isolated Digital I/O PC/104 Module
2-ch Counter/Timer with 24-ch Digital I/O
PC/104 Module
PCM-3725
Specifications
Isolated Digital Input
Digital Input
Digital Input
Channels
Input Voltage
Channels
16, 5 V/TTL
Interrupt Capable Ch. 4
Channels
Compatibility
Input Voltage
8
Logic 0: 3 V
Logic 1: 10 V (50 V max.)
Isolation Protection 2,500 VDC
Overvoltage
Protection
70 VDC
Opto-Isolator
Response
25 μs
Input Resistance
4.7 KΩ
Relay Output
Channels
Relay Type
Contact Rating
Relay on Time
Relay off Time
Life Span
Resistance
Bus Type
I/O Connectors
PC/104
1 x 20-pin head for IDI
1 x 50-pin head for relay
Dimensions (L x H) 96 x 90 mm (3.8" x 3.5")
Power Consumption Typical: 5 V @ 100 mA
Max.: 5 V @ 280 mA
Operating
Temperature
0 ~ 60° C (32 ~ 140° F)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95% RH, non-cond.
Ordering Information
PCM-3725
PCL-10120-1
PCL-10120-2
PCL-10150-1.2
ADAM-3920
ADAM-3950
PCLD-780
Channels
Input Voltage
Isolation Protection
Opto-Isolator
8
Logic 0: 2 V max.
Logic 1: 5 V min. (24 V max.)
2,500 VDC
0.1 ms
Response
Input Resistance
2 kΩ @ 0.5 W
Digital Output
8
SPDT (Form C)
30 VDC@ 1.5 A
4 ms
4 ms
100,000 min @ 2 A/30 V
Contact: 100 mΩ
Insulation: 1 GΩ @ 500 VDC
General
Isolated Digital Input
Channels
Output Capability
Sink:
Source:
8 mA @ 0.5 V max.
-0.4 mA @ 2.4 V min.
Isolated Digital Output
Channels
Output Type
Isolation Protection
Output Voltage
Sink Current
Opto-Isolator
Response
8
Sink (NPN)
2,500 VDC
5 ~ 40 VDC
200 mA max./channel
100 μs
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
PC/104
3 x 20-pin box header
96 x 90 mm (3.8" x 3.5")
Typical: 5 V @ 330 mA
Max.: 5 V @ 500 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity
5 ~ 95% RH, non-cond.
Ordering Information
PCM-3730
Screw Terminal Board w/ Two
20-pin Flat Cables
PCLD-885
PCL-10120-1
PCL-10120-2
ADAM-3920
PCLD-780
PCLD-785
COMPLIANT
Specifications
24 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.4 V min.
Interrupt Capable Ch. 24
Digital Output
Channels
24 (shared with input)
Compatibility
5 V/TTL
Output Voltage
Logic 0: 0.5 V max. @ 24 mA (sink)
Logic 1: 2.4 V min. @ 15 mA (source)
Counter/Timer
Channels
2
Resolution
16 bits
Compatibility
5 V/TTL
Max. Input Frequency 20 MHz
Counter Modes
12 (programmable)
Interrupt Capable Ch. 2
General
Bus Type
I/O Connectors
General
8-ch Relay/Isolated Digital
Input PC/104 Module
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
50-pin Flat Cable, 1.2 m
20-pin DIN-rail Flat Cable
Wiring Board
50-pin DIN-rail Flat Cable
Wiring Board
Data Acquisition Boards
16, 5 V/TTL
5R+6
PCM-3780
COMPLIANT
Specifications
16-70
5R+6
PCM-3730
16-ch Isolated DI/O PC/104
Module w/ 20p Cable
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
20-pin DIN-rail Flat Cable
Wiring Board
Screw Terminal Board w/ Two
20-pin Flat Cables
16-ch Relay Board w/ One
1m 20-pin Flat Cable
16-ch Power Relay Board w/
20p & 50p Flat Cables
PC/104
1 x 50-pin box header
1 x 20-pin box header
Dimensions (L x H) 96 x 90 mm (3.8" x 3.5")
Power Consumption Typical: 5 V @ 300 mA
Max.: 5 V @ 0.8 mA
Operating
0 ~ 60° C (32 ~ 140° F)
Temperature
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Operating Humidity 5 ~ 85% RH non-cond.
Ordering Information
PCM-3780
PCL-10120-1
PCL-10150-1.2
ADAM-3920
ADAM-3950
2-ch Counter/Timer, DI/O,
PC/104 Module w/Cables
20-pin Flat Cable, 1 m
50-pin Flat Cable, 1.2 m
20-pin DIN-rail Flat Cable
Wiring Board
50-pin DIN-rail Flat Cable
Wiring Board
PCM-3730I
PCM-3753I
PCM-3761I
32-ch Isolated Digital I/O PCI-104 Module
96-ch Digital I/O PCI-104 Module
8-ch Relay and 8-ch Isolated Digital
Input PCI-104 Module
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Fanless Panel PCs
Panel Computers
Display Solutions
5R+6
PCM-3730I
5R+6
PCM-3753I
COMPLIANT
5R+6
PCM-3761I
COMPLIANT
COMPLIANT
Ethernet Switches
Features
Features
Features
High-voltage isolation on both input and output
channels (2,500 VDC)
High output driving capacity
Interrupt handling capability
Keep digital output values after system reset
Supports dry/wet contact
Keeps the last output value after system hot reset
Interrupt handling capacity
“Pattern match” and “change of state” interrupt
functions
Output status read-back
Interrupt output pin for simultaneously triggering
external devices
16
Logic 0: 3 V max.
Logic 1: 5 V min.
30 V max.
2.5 mA @ 5 V
15 mA @ 30 V
2 kΩ
2,500 VDC
Specifications
Channels
Input Voltage
70 VDC
Output Voltage
25 μs
All channels
Output Capability
Specifications
Isolated Digital Input
Channels
Input Voltage
Input Current
Input Resistance
Isolation Voltage
Over Voltage
Protection
Opto-isolator
Response Time
Interrupt Capable
Isolated Digital Output
Channels
Output Voltage
Open Collector
Output Sink Current
Isolation Voltage
Over Current
Protection
Opto-isolator
Response Time
16
5 ~ 30 VDC
200 mA max.
2,500 VDC
1.6 A per 8 channels
25 μs
General
Bus Type
PCI-104
I/O Connectors
2 x 20-pin box header
Dimensions (L x H) 96 x 90 mm (3.8" x 3.5")
Operating
Temperature
-20 ~ 70° C (-4 ~ 158° F)
Storage Temperature -50 ~ 120° C (-58~248° F)
Ordering Information
PCM-3730I
ADAM-3920
PCL-10120-1
PCL-10120-2
32-ch Isolated Digital I/O
PCI-104 Module
20-pin DIN-rail Wiring
Board
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
Specifications
Isolated Digital Input
Digital Input/Output
Channels
Compatibility
Input Voltage
96 (bi-directional)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 0.4 V @ 24 mA
Source: 2.4 V @ 15 mA
General
Bus Type
PCI-104
I/O Connectors
4 x 50-pin box header
Dimensions (L x H) 96 x 90 mm (3.8" x 3.5")
Operating
Temperature
-20 ~ 70° C (-4 ~ 158° F)
Storage Temperature -50 ~ 120° C (-58~248° F)
Ordering Information
PCM-3753I
PCL-10150-1.2
ADAM-3950
PCLD-782B
PCLD-785B
96-ch Digital I/O PCI-104
Module w/ 50p Cable
50-pin Flat Cable, 1.2 m
50-pin DIN-rail Flat Cable
Wiring Board
24-ch IDI Board w/ 20-pin
& 50-pin Flat Cables
24-ch Relay Board w/
20-pin & 50-pin Flat
Cables
8 Form C type relay output channels
Device Servers
Retained relay output values when hot system reset
High-voltage isolation on input channels (2,500 VDC)
Wide input range (5 ~ 30 VDC)
Serial Comm. Cards
Interrupt handling capability
8
Logic 0: 3 V max.
Logic 1: 5 V min.
30 V max.
Input Current
2.5 mA @ 5 V
15 mA @ 30 V
Input Resistance
2 kW 0.5 W
Isolation Protection 2,500 VDC
Overvoltage Protection 70 VDC
Interrupt Capable
All channels
Opto-isolator
Response Time
25 μs
Relay Output
Channels
Relay Type
Contact Rating
Relay on Time
Relay off Time
Life Span
Resistance
Video Surveillance
Pre-Configured Systems
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
8
DPDT, Form C
240 VAC @ 0.25 A,
or 30 VDC @ 1 A
5 ms max.
4 ms max.
1 x 107 @ 6 V/100 mA
Contact: < 50 mW
Insulation: 1 GW min.
(at 500 VDC)
General
Bus Type
I/O Connectors
Embedded IPCs
Mobile Computers
PCI-104
1 x 50-pin, 1 x 20-pin box
header
Dimensions (L x H)
96 x 90 mm (3.8" x 3.5" )
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
(refer to IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
IPC Peripherals
Ordering Information
Signal Conditioning
PCM-3761I
ADAM-3920
ADAM-3950
PCL-10150-1.2
PCL-10120-1
PCL-10120-2
Online Download www.advantech.com/products
8-ch Relay/Isolated Digital
Input PCI-104 Module
20-pin DIN-rail Flat Cable
Wiring Board
50-pin DIN-rail Flat Cable
Wiring Board
50-pin Flat Cable, 1.2 m
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
DAQ
USB DAQ
16-71
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising