HP | Pavilion 6500 - Desktop PC | System information | HP Pavilion 6500 - Desktop PC System information

HP Pavilion 6500 - Desktop PC System information
HP Pavilion dv6500 Entertainment PC
Maintenance and Service Guide
© Copyright 2007 Hewlett-Packard
Development Company, L.P.
Bluetooth is a trademark owned by its
proprietor and used by Hewlett-Packard
Company under license. AMD, Athlon,
Turion, and combinations thereof, are
trademarks of Advanced Micro Devices, Inc.
Intel and Core are trademarks or registered
trademarks of Intel Corporation or its
subsidiaries in the United States and other
countries. Microsoft, Windows, and
Windows Vista are either trademarks or
registered trademarks of Microsoft
Corporation in the United States and/or other
countries. SD Logo is a trademark of its
proprietor.
The information contained herein is subject to
change without notice. The only warranties
for HP products and services are set forth in
the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
Third Edition: July 2007
First Edition: April 2007
Document Part Number: 443406-003
Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not
place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a
hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact
the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC
adapter comply with the user-accessible surface temperature limits defined by the International Standard
for Safety of Information Technology Equipment (IEC 60950).
iii
iv
Safety warning notice
Table of contents
1 Product description
2 External component identification
Display components ................................................................................................................. 7
Top components ...................................................................................................................... 8
Lights ....................................................................................................................... 8
Keys ........................................................................................................................ 9
Buttons, speakers, and fingerprint reader ................................................................... 10
TouchPad ............................................................................................................... 12
Front components ................................................................................................................... 13
Left-side components ............................................................................................................... 14
Right-side components ............................................................................................................ 15
Rear component ..................................................................................................................... 15
Bottom components ................................................................................................................ 16
3 Illustrated parts catalog
Serial number location ............................................................................................................ 17
Computer major components ................................................................................................... 18
Display assembly components ................................................................................................. 25
Plastics Kit ............................................................................................................................. 26
Cable Kit .............................................................................................................................. 28
Mass storage devices ............................................................................................................. 29
Miscellaneous parts ................................................................................................................ 30
Sequential part number listing .................................................................................................. 31
4 Removal and replacement procedures
Preliminary replacement requirements ....................................................................................... 39
Tools required ......................................................................................................... 39
Service considerations ............................................................................................. 39
Plastic parts ............................................................................................. 39
Cables and connectors ............................................................................. 40
Drive handling ......................................................................................... 40
Grounding guidelines .............................................................................................. 41
Electrostatic discharge damage .................................................................. 41
Packaging and transporting guidelines ........................................ 42
Workstation guidelines .............................................................. 42
Equipment guidelines ................................................................. 43
Unknown user password .......................................................................................... 44
v
Component replacement procedures ........................................................................................ 45
Serial number ......................................................................................................... 45
Battery ................................................................................................................... 46
Camera module ...................................................................................................... 47
Display inverter ....................................................................................................... 49
Hard drive ............................................................................................................. 51
Computer feet ......................................................................................................... 53
Memory module ...................................................................................................... 53
RTC battery ............................................................................................................ 55
WLAN module ........................................................................................................ 56
Optical drive .......................................................................................................... 59
Switch cover ........................................................................................................... 61
Speaker assembly ................................................................................................... 63
Power button board ................................................................................................. 64
Keyboard ............................................................................................................... 65
Display assembly .................................................................................................... 68
Top cover ............................................................................................................... 74
Bluetooth module .................................................................................................... 78
ExpressCard assembly ............................................................................................. 79
USB/power connector board .................................................................................... 81
System board ......................................................................................................... 82
Audio board ........................................................................................................... 86
Fan/heat sink assembly ........................................................................................... 87
Processor ............................................................................................................... 89
5 Setup Utility
Starting the Setup Utility .......................................................................................................... 92
Changing the language of the Setup Utility ............................................................................... 92
Navigating and selecting in the Setup Utility .............................................................................. 93
Displaying system information .................................................................................................. 93
Restoring default settings in the Setup Utility .............................................................................. 93
Using advanced Setup Utility features ....................................................................................... 94
Closing the Setup Utility .......................................................................................................... 94
Setup Utility menus ................................................................................................................. 94
6 Specifications
Computer specifications .......................................................................................................... 96
15.4-inch, WXGA, BrightView display specifications ................................................................. 97
Hard drive specifications ........................................................................................................ 98
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive specifications ................................ 99
System DMA specifications, Intel ............................................................................................ 100
System DMA specifications, AMD discrete and UMA graphics .................................................. 101
System interrupt specifications, Intel ........................................................................................ 102
System interrupt specifications, AMD discrete graphics ............................................................. 103
System interrupt specifications, AMD UMA graphics ................................................................ 104
System I/O address specifications, Intel .................................................................................. 105
System I/O address specifications, AMD discrete and UMA graphics ........................................ 107
System memory map specifications, Intel ................................................................................. 109
System memory map specifications, AMD discrete graphics ...................................................... 110
vi
System memory map specifications, AMD UMA graphics .......................................................... 111
7 Screw listing
Phillips PM2.0×5.0 captive screw ..........................................................................................
Phillips PM3.0×4.0 screw .....................................................................................................
Phillips PM2.0×3.0 screw .....................................................................................................
Phillips PM2.5×7.0 screw .....................................................................................................
Phillips PM2.5×5.0 screw .....................................................................................................
Phillips PM2.5×2.0 screw .....................................................................................................
Phillips PM2.5×4.0 screw .....................................................................................................
Hex HM5.0×9.0 standoff .....................................................................................................
Phillips PM2.0×2.0 screw .....................................................................................................
Phillips PM2.5×5.0 captive screw ..........................................................................................
Phillips 2.5×4.0 captive screw ...............................................................................................
113
114
115
117
120
122
123
125
126
127
128
8 Backup and Recovery
Recovering system information ............................................................................................... 129
Backing up your information ................................................................................... 129
When to back up ................................................................................... 129
Back up suggestions ............................................................................... 130
Using system restore points ..................................................................................... 130
When to create restore points .................................................................. 130
Create a system restore point ................................................................... 130
Restore to a previous date and time .......................................................... 131
Creating recovery discs ......................................................................................... 131
Reinstalling software programs and drivers ............................................................... 132
Reinstalling preinstalled programs and drivers ........................................... 132
Reinstalling programs from discs .............................................................. 132
Performing a recovery ........................................................................................... 133
Recovering from the recovery discs ........................................................... 133
Recovering from the partition on the hard drive .......................................... 133
Deleting the recovery partition on the hard drive ....................................................... 134
Updating reinstalled software ................................................................................. 134
9 Connector pin assignments
Audio-in (microphone) ..........................................................................................................
Audio-out (headphone) .........................................................................................................
External monitor ...................................................................................................................
RJ-11 (modem) .....................................................................................................................
RJ-45 (network) ....................................................................................................................
S-Video-out ..........................................................................................................................
Universal Serial Bus ..............................................................................................................
135
135
136
137
137
138
138
10 Power cord set requirements
Requirements for all countries or regions ................................................................................. 139
Requirements for specific countries or regions .......................................................................... 140
11 Recycling
vii
Battery ................................................................................................................................ 141
Display ............................................................................................................................... 141
Index ............................................................................................................................... 147
viii
1
Product description
Category
Description
Discrete
graphics,
AMD
UMA
graphics,
AMD
Fullfeatured,
Intel
Defeature
d Intel
Product
Name
HP Pavilion dv6500 Entertainment
PC
√
√
√
√
Processors
Intel® Core™ 2 Duo processors
2.20-GHz processor, 4-MB L2 cache, 800MHz front side bus (FSB)
√
√
2.00-GHz processor, 2-MB L2 cache, 800MHz FSB
√
√
1.86-GHz processor, 1-MB L2 cache, 533MHz FSB
√
√
1.50-GHz processor, 2-MB L2 cache, 667MHz FSB
√
√
T7300 2.0-GHz processor, 4-MB L2 cache,
800-MHz FSB
√
√
T7100 1.8-GHz processor 2-MB L2 cache,
800-MHz FSB
√
√
T5250 1.5-GHz processor 2-MB L2 cache,
667-MHz FSB
√
√
Intel Core Duo processors
AMD processors
Chipset
Turion™ MK-38 (2.2-GHz, 512-MB L2
cache)
√
√
Turion TL-66 (2.3 -GHz, 1-MB L2 cache)
√
√
Turion TL-60 (2.0 -GHz, 1-MB L2 cache)
√
√
Turion TL-58 (1.9 -GHz, 1-MB L2 cache)
√
√
Turion TL-56 (1.8 -GHz, 1-MB L2 cache)
√
√
Athlon™ TK-53 (1.7-GHz. 512-MB L2
cache)
√
√
Northbridge: Intel PM965
√
Northbridge: Intel GM965
Southbridge: Intel ICH8m
√
√
√
1
Category
Description
Discrete
graphics,
AMD
Northbridge/Southbridge: nVidia MCP67D
√
Northbridge/Southbridge: nVidia
MCP67M
Graphics
nVidia Discrete PCI Express x 16
Graphics
UMA
graphics,
AMD
Fullfeatured,
Intel
Defeature
d Intel
√
√
√
nVidia NB8M-SE -GS with 128-MB of
dedicated video memory (16M × 16 DDR2
× 4 PCs) with:
●
192 MB of video memory on computer
models with 512-MB system random
access memory (RAM) (128-MB + 64MB Turbo Cache)
●
383 MB of video memory on computer
models with 1-GB system RAM (128MB + 255-MB Turbo Cache)
●
895 MB of video memory on computer
models with 2-GB system RAM (128MB + 767-MB Turbo Cache)
●
1919 MB of video memory on
computer models with 4-GB system
RAM (128-MB + 1535-MB Turbo
Cache)
System design supports up to 55 W GPU
requirement.
Intel Extreme Graphics (Mobile Intel
Graphics Media Accelerator X3100) UMA
(integrated) with shared video memory,
and:
●
Up to 64 MB on computer models with
512 MB of system RAM
●
or, Up to 256 MB on computer models
with 1024 MB or more of system RAM
√
Memory size is a dynamic change.
UMA nVidia MCP67M with shared video
memory, and:
●
Up to 128 MB on computer models
with 512 MB of system RAM
●
Up to 287 MB on computer models
with 1024 MB of system RAM
●
Up to 559 MB on computer models
with 2048 MB of system RAM
●
Up to 559 MB on computer models
with 4096 MB of system RAM
Memory size is dynamically allocated.
2
Chapter 1 Product description
√
Category
Description
Discrete
graphics,
AMD
UMA
graphics,
AMD
Fullfeatured,
Intel
Defeature
d Intel
Panel
15.4-inch, WXGA BrightView
√
√
√
√
Memory
2 SODIMM slots
√
√
√
√
Customer-accessible/upgradable
√
√
√
√
Supports up to 4 GB of system RAM
√
√
√
√
PC2-5300, DDRII (667-MHz)
√
√
√
√
Supports the following configurations:
√
√
√
√
Supports 9.5-mm, 2.5-inch hard drives
√
√
√
√
Serial ATA
√
√
√
√
Supports the following drives:
√
√
√
√
Fixed (removal of 1 screw required)
√
√
√
√
Parallel ATA
√
√
√
√
12.7-mm tray load
√
√
√
√
√
√
√
√
√
√
√
√
√
Hard drives
Optical
drives
●
4096 (2048 × 2)
●
2048 (2048 × 1, 1024 × 2)
●
1536 (1024 + 512)
●
1024 (1024 × 1, 512 × 2)
●
512 (512 × 1)
●
250-GB, 5400-rpm
●
200-GB, 4200-rpm
●
160-GB, 5400-rpm
●
120-GB, 5400-rpm
●
80-GB, 5400-rpm
●
HD-ROM Drive
√
●
DVD±RW and CD-RW Super Multi
Double-Layer Combo Drive with
LightScribe
√
●
DVD±RW and CD-RW Super Multi
Double-Layer Combo Drive
√
●
DVD-CD/RW Combo Drive
√
Diskette
drive
Supports external USB drive only
√
√
√
√
Camera
1.3-megapixel, low-light, VGA camera fixed (no tilt)
√
√
√
√
3
Category
Description
Discrete
graphics,
AMD
UMA
graphics,
AMD
Fullfeatured,
Intel
Defeature
d Intel
Microphone
2 omnidirectional, dual-array microphones,
with beam-forming, echo-cancellation,
noise-suppression software
√
√
√
√
Audio
HD audio - Realtek ALC861-VD-GR
√
√
√
Modem
Ethernet
Wireless
External
media card
Ports
4
HD Audio - Conexant CX20549-12
√
Supports Windows Vista Premium Logo
requirements
√
√
√
√
Pavilion-branded Altec Lansing speakers
√
√
√
√
56K V.92 data/fax modem
√
√
√
√
Supports all world-wide certification
requirements
√
√
√
√
Modem cable not included
√
√
√
√
√
√
√
√
√
√
Intel PRO Wireless 3945 802.11a/b/g
and 802.11b/g with 2 antennae integrated
into the display assembly
√
√
Intel PRO Wireless 4965 802.11a/b/g/n
with 3 antennae integrated into the display
assembly @ 2.4 and 5.0 GHz
√
√
Intel WLAN + Bluetooth®
√
√
Integrated Realtek 10/100 network
interface card (NIC)
10/100/1000 (Gigabit Ethernet,
RTL8211B)
√
Ethernet cable not included
√
Integrated wireless local area
network (WLAN) options by way of
wireless module:
Broadcom 4321AGN Wi-Fi Adapter
(802.11 a/b/g/ draft-n) + Bluetooth w/2
antennas
√
√
Broadcom 4321AGN Wi-Fi Adapter
(802.11 a/b/g/ draft-n) w/2 antennas
√
√
One ExpressCard54 slot
√
√
√
√
Digital Media Slot, supports SD, MMC,
SDIO, MS, MSpro, xD
√
√
√
√
Audio-in (mono microphone)
√
√
√
√
Audio-out (stereo headphone)
√
√
√
√
Audio-out (stereo headphone with S/PDIF)
√
√
√
Consumer infrared
√
√
√
√
RJ-11 (modem)
√
√
√
√
Chapter 1 Product description
Category
Description
Discrete
graphics,
AMD
UMA
graphics,
AMD
Fullfeatured,
Intel
Defeature
d Intel
RJ-45 (Ethernet, includes link and activity
lights)
√
√
√
√
S-Video-out
√
√
√
√
HDMI v1.2 supporting 1080p with HDCP
key
√
USB (3)
√
√
√
USB (1)
√
VGA (Dsub 15-pin)
√
√
√
1394
√
√
√
2-pin AC power
√
√
√
√
Docking
Expansion port 3 supports HP xb3000
Notebook Expansion Base and
HP Notebook QuickDock
√
√
√
√
Keyboard/
pointing
devices
15.4-inch keyboard
√
√
√
√
TouchPad with 2 buttons and two-way scroll
(taps enabled as default)
√
√
√
√
12-cell 2.20-Ah Li-ion battery
√
√
√
√
6-cell 2.55-Ah Li-ion battery
√
√
√
√
6-cell 2.20-Ah Li-ion battery
√
√
√
√
65-W AC adapter with localized cable plug
support (2-wire plug with ground pin,
supports 2-pin DC connector)
√
√
√
√
90-W (PFC only)
√
Security cable slot
√
√
√
√
Fingerprint reader
√
√
√
√
√
√
√
√
√
√
√
Power
requirements
Security
Operating
system
Preinstalled:
Windows Vista™ Business (32-bit)
Windows Vista Ultimate (64-bit)
Serviceability
√
Windows Vista Premium (32- and 64-bit)
√
√
√
√
Windows Vista Home Basic (32-bit)
√
√
√
√
AC adapter
√
√
√
√
Battery (system)
√
√
√
√
Hard drive
√
√
√
√
End-user replaceable parts:
5
Category
6
Description
Discrete
graphics,
AMD
UMA
graphics,
AMD
Fullfeatured,
Intel
Defeature
d Intel
Memory module
√
√
√
√
Optical drive
√
√
√
√
WLAN module
√
√
√
√
Chapter 1 Product description
2
External component identification
Display components
Item
Component
Description
(1)
Internal display switch*
Turns off the display if the display is closed while the
computer is on.
(2)
Internal microphones (2) (select models only)
Record sound.
NOTE: If there is a microphone icon next to each
microphone opening, the computer has internal
microphones.
(3)
Integrated camera light (select models only)
On: The integrated camera is in use.
(4)
Integrated camera (select models only)
Records video and captures still photographs.
*The location of the internal display switch varies by computer model.
Display components
7
Top components
Lights
Item
Component
Description
(1)
Power lights (2)*
●
On: The computer is on.
●
Blinking: The computer is in the Sleep state.
●
Off: The computer is off or in Hibernation.
●
On: A battery is charging.
●
Blinking: A battery that is the only available power
source has reached a low battery level or a critical
battery level.
●
Off: If the computer is plugged into an external power
source, the light is turned off when all batteries in the
computer are fully charged. If the computer is not
plugged into an external power source, the light stays
off until the battery reaches a low battery level.
(2)
Battery light
(3)
Drive light
Blinking: The hard drive or optical drive is being accessed.
(4)
Caps lock light
On: Caps lock is on.
(5)
Volume mute light
●
Blue: Computer sound is turned on.
●
Amber: Computer sound is turned off.
(6)
Volume down light
Blinking: The volume scroll zone is being used to decrease
speaker volume.
(7)
Volume up light
Blinking: The volume scroll zone is being used to increase
speaker volume.
(8)
Num lock light
On: Num lock is on or the embedded numeric keypad is
enabled.
*The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The
power light on the front of the computer is visible whether the computer is open or closed.
8
Chapter 2 External component identification
Keys
Item
Component
Function
(1)
esc key
Displays system information when pressed in combination
with the fn key.
(2)
fn key
Executes frequently used system functions when pressed in
combination with a function key or the esc key.
(3)
Windows logo key
Displays the Windows® Start menu.
(4)
Windows applications key
Displays a shortcut menu for items beneath the pointer.
(5)
Embedded numeric keypad keys
Can be used like the keys on an external numeric keypad.
(6)
Function keys
Execute frequently used system functions when pressed in
combination with the fn key.
Top components
9
Buttons, speakers, and fingerprint reader
Item
Component
Description
(1)
Power button*
●
When the computer is off, press the button to turn on
the computer.
●
When the computer is on, press the button to shut down
the computer.
●
When the computer is in the Sleep state, press the
button briefly to exit Sleep.
●
When the computer is in Hibernation, press the button
briefly to exit Hibernation.
If the computer has stopped responding and Windows®
shutdown procedures are ineffective, press and hold the
power button for at least 5 seconds to turn off the computer.
To learn more about power settings, select Start > Control
Panel > System and Maintenance > Power
Options.
(2)
Speakers (2)
Produce sound.
(3)
Media button
Opens the QuickPlay program.
NOTE: If the computer has been set up to require a logon
password, you may be asked to log on to Windows.
QuickPlay opens after you log on. Refer to the QuickPlay
software Help for more information.
(4)
DVD button
Opens the DVD playback feature of the QuickPlay program.
NOTE: If the computer has been set up to require a logon
password, you may be asked to log on to Windows.
QuickPlay opens after you log on. Refer to the QuickPlay
software Help for more information.
(5)
10
Previous/rewind button
Chapter 2 External component identification
●
Plays the previous track or chapter when pressed once.
●
Rewinds media when pressed simultaneously with
the fn key.
Item
Component
Description
(6)
Play/pause button
Plays or pauses the disc.
(7)
Next/fast forward button
●
Plays the next track or chapter when pressed once.
●
Fast forwards media when pressed simultaneously with
the fn key.
(8)
Stop button
Stops the disc.
(9)
Volume mute button
Mutes and restores the speaker sound.
(10)
Volume scroll zone
Adjusts speaker volume. Slide your finger to the left to
decrease volume and to the right to increase volume. You
can also tap the minus sign on the scroll zone to decrease
volume, or tap the plus sign on the scroll zone to increase
volume.
(11)
Fingerprint reader (select models only)
Allows a fingerprint logon to Windows, instead of a
password logon.
*This table describes factory settings. For information about changing factory settings, refer to the user guides located in Help
and Support.
Top components
11
TouchPad
Item
Component
Function
(1)
TouchPad light
●
Blue: TouchPad is enabled.
●
Amber: TouchPad is disabled.
(2)
TouchPad*
Moves the pointer and selects or activates items on the
screen.
(3)
Left TouchPad button*
Functions like the left button on an external mouse.
(4)
TouchPad on/off button
Enables/disables the TouchPad.
(5)
TouchPad scroll zone
Scrolls up or down.
(6)
Right TouchPad button*
Functions like the right button on an external mouse.
*This table describes factory settings. To view or change pointing device preferences, select Start > Control Panel >
Hardware and Sound > Mouse.
12
Chapter 2 External component identification
Front components
Item
Component
Function
(1)
Power light
●
On: The computer is on.
●
Blinking: The computer is in the Sleep state.
●
Off: The computer is off or in Hibernation.
●
On: A battery is charging.
●
Blinking: A battery that is the only available power
source has reached a low battery level or a critical
battery level.
●
Off: If the computer is plugged into an external power
source, the light is turned off when all batteries in the
computer are fully charged. If the computer is not
plugged into an external power source, the light stays
off until the battery reaches a low battery level.
(2)
Battery light
(3)
Drive light
Blinking: The hard drive or optical drive is being accessed.
(4)
Wireless switch
Turns the wireless feature on or off, but does not create a
wireless connection.
NOTE: To establish a wireless connection, a wireless
network must already be set up.
(5)
Wireless light
●
Blue: An integrated wireless device, such as a WLAN
device and/or a Bluetooth® device, is turned on.
●
Amber: An integrated wireless device is turned off.
(6)
Consumer infrared lens
Receives a signal from a remote control device, such as the
HP Remote Control.
(7)
Audio-in (microphone) jack
Connects an optional computer headset microphone, stereo
array microphone, or monaural microphone.
(8)
Audio-out (headphone) jack
Produces sound when connected to optional powered stereo
speakers, headphones, ear buds, a headset, or television
audio.
(9)
Audio-out (headphone) S/PDIF jack (select models
only)
Produces sound when connected to optional powered stereo
speakers, headphones, ear buds, a headset, or television
audio.
Front components
13
Left-side components
Item
Component
Function
(1)
Security cable slot
Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a
deterrent, but it may not prevent the computer from being
mishandled or stolen.
(2)
S-Video-out jack
Connects an optional S-Video device such as a television,
VCR, camcorder, overhead projector, or video capture
card.
(3)
External monitor port
Connects an external VGA monitor or projector.
(4)
Expansion port 3
Connects the computer to an optional docking device or
expansion product.
NOTE: The computer has only one expansion port. The
term expansion port 3 describes the type of expansion port.
(5)
RJ-45 (network) jack
Connects a network cable.
NOTE: On select computer models, the network jack
provides Gigabit Ethernet functionality.
14
(6)
RJ-11 (modem) jack
Connects a modem cable.
(7)
HDMI port (select models only)
Connects an optional video or audio device such as a highdefinition television, set-top box, DVD player, or any
compatible digital or audio device.
(8)
USB ports (1 or 2, depending on computer model)
Connect optional USB devices.
(9)
1394 port (select models only)
Connects an optional IEEE 1394 or 1394a device, such as
a camcorder.
(10)
Digital Media Slot light (select models only)
On: A digital card is being accessed.
(11)
Digital Media Slot (select models only)
Supports the following optional digital card formats:
Chapter 2 External component identification
●
Memory Stick (MS)
●
Memory Stick Pro (MSP)
●
MultiMediaCard (MMC)
●
Secure Digital Input/Output (SD I/O)
●
Secure Digital (SD) Memory Card
●
xD-Picture Card (XD)
Item
Component
Function
●
xD-Picture Card (XD) Type H
●
xD-Picture Card (XD) Type M
Right-side components
Item
Component
Function
(1)
ExpressCard slot
Supports optional ExpressCard/54 cards.
(2)
Optical drive
Reads optical discs, and, on select models, also writes to
optical discs.
(3)
Optical drive light
Blinking: The optical drive is being accessed.
(4)
USB port (select models only)
Connects an optional USB device.
(5)
Power connector
Connects an AC adapter.
Rear component
Component
Description
Vent
Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
Right-side components
15
Bottom components
Item
Component
Function
(1)
Battery bay
Holds the battery.
(2)
Battery release latch
Releases the battery from the battery bay.
(3)
Vents (5)
Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
(4)
Memory/WLAN module compartment
Contains the memory module slots, the WLAN module slot,
and the RTC battery.
CAUTION: To prevent an unresponsive system, replace
the wireless module only with a wireless module authorized
for use in the computer by the governmental agency that
regulates wireless devices in your country or region. If you
replace the module and then receive a warning message,
remove the module to restore computer functionality, and
then contact technical support through Help and Support.
(5)
16
Hard drive bay
Chapter 2 External component identification
Holds the hard drive.
3
Illustrated parts catalog
Serial number location
When ordering parts or requesting information, provide the computer serial number and model number
located on the bottom of the computer.
Serial number location
17
Computer major components
18
Item
Description
(1)
Display assemblies
Chapter 3 Illustrated parts catalog
Spare part number
Item
Description
Spare part number
15.4-inch, WXGA, BrightView, display assembly for use only with computer models equipped
with a camera (includes camera, microphones, and WLAN transceivers and antenna cables)
446481-001
15.4-inch, WXGA, BrightView, display assembly for use only with computer models not
equipped with a camera (includes microphones and WLAN transceivers and antenna cables)
446482-001
15.4-inch, WXGA, BrightView, display assembly for use only with Best Buy computer models
equipped with a camera, microphones, and a fingerprint reader (includes camera,
microphones, and WLAN transceivers and antenna cables)
455311-001
15.4-inch, WXGA, BrightView, display assembly for use only with Best Buy computer models
equipped with a camera (includes camera, microphones, and WLAN transceivers and
antenna cables)
455312-001
15.4-inch, WXGA, BrightView, display assembly with plain painted top for use with computer
models with AMD processors
455197-001
NOTE:
See Display assembly components on page 25 for more information on display assembly spare part numbers.
(2)
Switch cover (includes LED board and cable)
446512-001
(3)
Power button board (includes power button board cable)
431437-001
(4)
Keyboards
For use with HP Pavilion dv6500 Entertainment PC computer models:
●
Belgium
441427-A41
●
The Czech Republic
441427-221
●
Denmark
441427-081
●
Finland, Norway, and Sweden
441427-DH1
●
France
441427-051
●
French Canada
441427-121
●
Germany
441427-041
●
Greece
441427-DJ1
●
Israel
441427-BB1
●
Italy
441427-061
●
Japan
441427-291
●
Latin America
441427-161
●
South Korea
441427-AD1
●
The Netherlands and Europe
441427-B31
●
Portugal
441427-131
●
Russia
441427-251
●
Saudi Arabia
441427-171
●
Spain
441427-071
●
Switzerland
441427-BG1
●
Taiwan
441427-AB1
Computer major components
19
Item
Description
Spare part number
●
Thailand
441427-281
●
Turkey
441427-141
●
The United Kingdom
441427-031
●
The United States
441427-001
For use only with Best Buy computer models:
(5)
●
Finland, Norway, and Sweden
443689-DH1 and
452636-DH1
●
French Canada
443689-121 and
452636-121
●
The Netherlands and Europe
443689-B31 and
452636-B31
●
Italy
443689-061 and
452636-061
●
Portugal
443689-131 and
452636-131
●
Saudi Arabia
443689-171 and
452636-171
●
Spain
443689-071 and
452636-071
●
Turkey
443689-141 and
452636-141
●
The United Kingdom
443689-031 and
452636-031
●
The United States
441426-001 and
452636-001
Top covers (include TouchPad and cable)
For use only in computer models with Intel processors:
●
Equipped with a fingerprint reader (includes fingerprint reader board and cable)
446509-001
●
Not equipped with a fingerprint reader
446508-001
●
Only with Best Buy computer models equipped with a fingerprint reader (includes
fingerprint reader board and cable)
452635-001
●
Only with Best Buy models not equipped with a fingerprint reader
452634-001
●
Fingerprint reader board (not illustrated; includes fingerprint reader board cable)
446511-001
For use only in computer models with AMD processors:
(6)
20
●
In full-featured models equipped with a fingerprint reader (includes TouchPad, TouchPad
cable, fingerprint reader board, and fingerprint reader board cable)
449942-001
●
In defeatured models equipped with a fingerprint reader (includes TouchPad, TouchPad
cable, fingerprint reader board, and fingerprint reader board cable)
451408-001
●
Fingerprint reader board (not illustrated; includes fingerprint reader board cable)
449944-001
Speaker assembly
Chapter 3 Illustrated parts catalog
431447-001
Item
Description
(7)
Top cover trim
(8)
Spare part number
For use only in full-featured models
431421-001
For use only in defeatured models
431420-001
Fan/heat sink assemblies (include thermal material)
For use only in computer models with Intel processors:
●
Equipped with discrete graphics subsystem memory
434986-001 and
450933-001
●
Equipped with UMA graphics subsystem memory
446521-001
For use only in computer models with AMD processors:
●
Equipped with discrete graphics subsystem memory
449960-001
●
Equipped with UMA graphics subsystem memory
451860-001
Plastics Kit (see Plastics Kit on page 26 for more Plastics Kit component information):
(9a)
ExpressCard slot bezel
(9b)
Hard drive cover (includes 2 captive screws, secured by C-clips)
(9c)
Memory/WLAN module compartment cover (includes 2 captive screws, secured by C-clips)
438368-001
HDMI port cover (not illustrated)
(10)
ExpressCard assembly
(11)
Processors
431439-001
Intel Core 2 Duo processors:
●
2.20-GHz processor (4-MB L2 cache, 800-MHz FSB)
453771-001
●
2.00-GHz processor (2-MB L2 cache, 800-MHz FSB)
455515-001
●
1.86-GHz processor (1-MB L2 cache, 533-MHz FSB)
453773-001
●
1.50-GHz processor (2-MB L2 cache, 667-MHz FSB)
453772-001
Intel Core Duo processors:
●
T7300 2.0-GHz processor (4-MB L2 cache, 800-MHz FSB)
446478-001
●
T7100 1.8-GHz processor (2-MB L2 cache, 800-MHz FSB)
446479-001
●
T5250 1.5-GHz processor (2-MB L2 cache, 667-MHz FSB)
453033-001
AMD processors:
●
Turion MK-38 (2.2-GHz, 512-MB L2 cache)
449904-001
●
Turion TL-66 (2.3 -GHz, 1-MB L2 cache)
450804-001
●
Turion TL-60 (2.0 -GHz, 1-MB L2 cache)
450803-001
●
Turion TL-58 (1.9 -GHz, 1-MB L2 cache)
450802-001
●
Turion TL-56 (1.8 -GHz, 1-MB L2 cache)
450801-001
●
Athlon TK-53 (1.7-GHz. 512-MB L2 cache)
451013-001
Computer major components
21
Item
Description
Spare part number
Processor bracket (not illustrated)
(12)
For use with 7.9 processors
450370-001
For use with 8.1 processors
450371-001
System boards (include modem cable and thermal material)
For use only with computer models with Intel processors:
●
Equipped with discrete graphics subsystem memory (includes 128 MB of discrete
graphics subsystem memory)
446476-001
●
In full-featured models equipped with UMA graphics subsystem memory
446477-001
●
In defeatured models equipped with UMA graphics subsystem memory
453769-001
For use only with computer models with AMD processors:
In full-featured models equipped with discrete graphics subsystem memory
449902-001
●
In full-featured models equipped with UMA graphics subsystem memory
449903-001
●
In defeatured models equipped with UMA graphics subsystem memory
454166-001
(13)
Bluetooth module (includes Bluetooth module cable)
(14)
USB/power connector boards (include USB/power connector board cable)
(15)
(16)
(17)
(18)
22
●
412766-002
For use only with computer models using 90-W AC adapters
446524-001
For use only with computer models using 65-W AC adapters
449454-001
Audio board (includes infrared lens and audio board cable)
For use with full-featured models
446523-001
For use with defeatured models
449967-001
Base enclosures (include wireless on/off switch)
For use only with full-featured computer models that use discrete graphics subsystem memory
446513-001
For use only with full-featured computer models with Intel processors that use UMA graphics
subsystem memory
448342-001
For use only with defeatured computer models with AMD processors
454172-001
Rubber Kit (not illustrated; includes base enclosure rubber feet and display bezel screw
covers)
431430-001
Batteries
12-cell, 8.80-Ah
451864-001
6-cell, 2.55-Ah
446507-001
6-cell, 2.20-Ah
446506-001
Hard drives (include hard drive bracket and hard drive connector)
250-GB, 5400-rpm
453775-001
200-GB, 4200-rpm
451863-001
160-GB, 5400-rpm
451462-001
Chapter 3 Illustrated parts catalog
Item
(19)
Description
Spare part number
120-GB, 5400-rpm
446498-001
80-GB, 5400-rpm
446497-001
60-GB, 5400-rpm
446496-001
WLAN modules
Intel 802.11a/b/g/n WLAN modules:
●
For use in Antigua & Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda,
Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican
Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India,
Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan,
Uruguay, the United States, Venezuela, and Vietnam
441086-001
●
For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the
Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece,
Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania,
Luxembourg, Malta, Monaco, the Netherlands, Norway, Oman, the Philippines, Poland,
Portugal, Qatar, Romania, Russia, Serbia and Montenegro, Singapore, Slovakia,
Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, Ukraine, the
United Kingdom, and Uzbekistan
441086-002 and
441087-002
●
For use in Australia, New Zealand, Pakistan, the People's Republic of China, and South
Korea
441086-003 and
441088-003
●
For use in Japan
441086-291 and
441089-291
●
For use in South Korea
441086-AD1
Intel 802.11a/b/g WLAN modules:
451861-001
●
For use in Antigua & Barbuda, Argentina, Australia, the Bahamas, Barbados, Brunei,
Canada, Chile, the Dominican Republic, Guam, Guatemala, Hong Kong, India,
Indonesia, Malaysia, Mexico, New Zealand, Panama, Paraguay, Saudi Arabia,
Taiwan, the United States, and Vietnam
●
For use in Aruba, Austria, Azerbaijan, Bahrain, Belgium, Bermuda, Brazil, Bulgaria, the 451861-002
Cayman Islands, Colombia, Croatia, Cyprus, the Czech Republic, Denmark, Egypt, El
Salvador, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Jordan, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta,
Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Romania,
Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri
Lanka, Sweden, Switzerland, Turkey, the United Kingdom, and Uzbekistan
●
For use in Ecuador, Haiti, Honduras, Pakistan, the People's Republic of China, Peru,
Qatar, South Korea, Uruguay, and Venezuela
451861-003
●
For use in Japan
451861-291
Broadcom 802.11b/g WLAN modules:
●
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and
the United States
441090-001
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia & Herzegovina Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African
Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus,
the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor,
Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland,
441090-002
Computer major components
23
Item
Description
Spare part number
France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar,
Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti,
Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the
Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos,
Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia,
Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands,
Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the
Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau,
Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the
Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia,
Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia
and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts & Nevis,
St. Lucia, St. Vincent & Grenada, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad & Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom,
Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and
Zimbabwe
●
For use in Japan
Intel 802.11b/g WLAN module for use in Thailand
441090-291
451861-004
Broadcom 4311AG 802.11a/b/g modules:
●
For use in the United States and Canada
441075-001
●
For use in France, Germany, Italy, the Netherlands, Spain, the United Kingdom, Nordic
region, and India
441075-002
Broadcom 4321AGN 802.11a/b/g/n modules:
●
For use in the United States and Canada
434661-001
●
For use in France, Germany, Italy, the Netherlands, Spain, the United Kingdom, Nordic
region, and India
434661-002
(20)
RTC battery (includes 2-sided tape)
(21)
Memory modules (667-MHz, PC2-5300, 1-DIMM)
(22)
446518-001 and
449729-001
2048-MB
453774-001
1024-MB
446495-001
512-MB
446494-001
Optical drives (include bezel)
For use in computers with Intel processors:
●
HD-ROM Drive
446502-001
●
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
446501-001
●
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
446500-001
●
DVD/CD-RW Combo Drive
446499-001
For use in computers with AMD processors:
24
●
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
448004-001
●
DVD±RW and DVD-ROM Super Multi Drive with LightScribe
449935-001
Chapter 3 Illustrated parts catalog
Item
Description
Spare part number
●
HD-ROM Super Multi Double-Layer Combo Drive with LightScribe
448006-001
●
CD-RW and DVD-ROM Combo Drive
449937-001
Cable Kit (not illustrated; see Cable Kit on page 28 for more Cable Kit component
information)
446519-001
Display assembly components
Item
Description
(1)
Display bezels
Spare part number
For use only with computer models equipped with a camera (includes openings for camera
and microphones)
446483-001
For use only with computer models not equipped with a camera (includes openings for
microphones)
436260-001
For use only with Best Buy computer models equipped with a camera (includes openings for
camera and microphones)
436260-001
For use only with Best Buy computer models not equipped with a camera (includes openings
for microphones)
455313-001
(2)
Display Hinge Kit (includes left and right display hinges)
431395-001
(3)
Display inverter (includes Mylar shield)
431391-001
(4)
Camera module (includes 2-sided tape)
446486-001
(5)
Display panel (15.4-inch, WXGA, BrightView; includes display panel cable and camera
cable)
446480-001
Display assembly components
25
Item
Description
(6)
Wireless Antenna Kits
Spare part number
For use only with computer models equipped with an 802.11a/b/g/n WLAN module
(includes 3 transceivers and cables)
449727-001
For use only with computer models equipped with an 802.11a/b/g or 802.11b/g WLAN
module (includes 2 transceivers and cables)
431398-001
(7)
Microphone
431393-001
(8)
Display Cable Kit (includes camera module cable)
431394-001
(9)
Display enclosures (include logo and WLAN wireless antenna transceivers and cables)
For use only with HP Pavilion dv6500 Entertainment PC computer models
446487-001
For use only with Best Buy computer models
436261-001
Display hinge covers (not illustrated)
For use only with full-featured computer models
431396-001
For use only with defeatured computer models
433289-001
Display Label Kit (not illustrated)
For use with computer models with Intel processors
446525-001
For use with computer models with AMD processors
449972-001
Display Screw Kit (not illustrated)
431399-001
Plastics Kit
26
Chapter 3 Illustrated parts catalog
Item
Description
Spare part number
Plastics Kit:
438368-001
(1)
ExpressCard slot bezel
(2)
Hard drive cover (includes 2 captive screws, secured by C-clips)
(3)
Memory/WLAN module compartment cover (includes 2 captive screws, secured by C-clips)
Plastics Kit
27
Cable Kit
Item
28
Description
Spare part number
Cable Kit:
446519-001
(1)
LED board cable
(2)
Power button board cable
(3)
USB/power connector board cable
(4)
Audio board cable
(5)
Bluetooth module cable
Chapter 3 Illustrated parts catalog
Mass storage devices
Item
Description
(1)
Hard drives (include hard drive bracket)
(2)
Spare part number
250-GB, 5400-rpm
453775-001
200-GB, 4200-rpm
451863-001
160-GB, 5400-rpm
451862-001
120-GB, 5400-rpm
446498-001
80-GB, 5400-rpm
446497-001
60-GB, 5400-rpm
446496-001
Optical drives (include bezel and bracket)
For use in computer models with Intel processors:
●
HD-ROM Drive
446502-001
●
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
446501-001
●
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
446500-001
●
DVD/CD-RW Combo Drive
446499-001
For use in computer models with AMD processors:
●
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
448004-001
●
CD-RW and DVD-ROM Combo Drive
449937-001
●
DVD±RW and DVD-ROM Super Multi Drive with LightScribe
449935-001
●
HD-ROM Super Multi Double-Layer Combo Drive with LightScribe
448006-001
Mass storage devices
29
Miscellaneous parts
Description
Spare part number
AC adapters:
90-W non-PFC AC adapter
432309-001
90-W PFC AC adapter
453198-001
65-W non-PFC AC adapter
402018-001
65-W PFC AC adapter
453199-001
ATSC/NTSC TV tuner antenna
439131-001
ATSC/NTSC/PAL TV tuner
439130-001
Composite video cable
407939-001
DVB-T tuner
412175-001
DVB-T antenna adapter
412176-001
ExpressCard Kit (includes software CD)
445170-001
HP backpack
405527-001
HP carrying case
418162-001
HP Remote Control
435743-001
Infrared emitter with cable
439129-001
Optical wired mouse
436238-001
RF input adapter cable (without ferrite)
407940-001
USB digital drive
364727-002
Windows Vista remote control (fits into ExpressCard slot)
439128-001
Windows Vista remote control (does not fit into ExpressCard slot)
439254-001
Wired headset
371693-001
Wireless laser mouse with cable adapter
430958-001
Power cords:
Australia and New Zealand
394279-011
Belgium, Europe, Finland, France, Germany, Greece, the Netherlands, Norway, Portugal, Spain, and 394279-021
Sweden
30
Canada, French Canada, Latin America, Thailand, and the United States
394279-001
Denmark
394279-081
India
394279-D61
Israel
394279-BB1
Italy
394279-061
Japan
394279-291
South Africa
394279-AR1
Chapter 3 Illustrated parts catalog
Description
Spare part number
South Korea
394279-AD1
The People's Republic of China
394279-AA1
Switzerland
394279-BG1
Taiwan
394279-AB1
The United Kingdom and Hong Kong
394279-031
Screw Kit
434747-001
●
Hex HM5.0×9.0 standoff
●
Phillips PM3.0×4.0 screw
●
Phillips PM2.5×7.0 screw
●
Phillips PM2.5×5.0 screw
●
Phillips PM2.5×5.0 captive screw
●
Phillips PM2.5×4.0 screw
●
Phillips PM2.5×4.0 captive screw
●
Phillips PM2.5×2.0 screw
●
Phillips PM2.0×5.0 captive screw
●
Phillips PM2.0×3.0 screw
●
Phillips PM2.0×2.0 screw
Sequential part number listing
Spare part
number
Description
364727-002
USB digital drive
371693-001
Wired headset with volume control
394279-001
Power cord for use in the United States
394279-011
Power cord for use in Australia
394279-021
Power cord for use in Europe
394279-031
Power cord for use in the United Kingdom
394279-061
Power cord for use in Italy
394279-081
Power cord for use in Denmark
394279-BG1
Power cord for use in Switzerland
394279-291
Power cord for use in Japan
394279-AA1
Power cord for use in the People's Republic of China
394279-AB1
Power cord for use in Taiwan
Sequential part number listing
31
32
Spare part
number
Description
394279-AD1
Power cord for use in South Korea
394279-AR1
Power cord for use in South Africa
394279-BB1
Power cord for use in Israel
394279-D61
Power cord for use in India
402018-001
65-watt non-PFC AC adapter
405527-001
HP backpack
407939-001
Composite video cable
407940-001
RF input adapter cable (without ferrite)
412175-001
DVB-T tuner
412176-001
DVB-T antenna adapter
412766-002
Bluetooth module (includes Bluetooth module cable)
418162-001
HP carrying case
430958-001
Wireless laser mouse (includes cable adapter)
431391-001
Display inverter
431393-001
Microphone (includes receiver and cable)
431394-001
Display Cable Kit
431395-001
Display Hinge Kit (includes left and right display hinges)
431396-001
Display Hinge Cover Kit for use with full-featured computer models
431398-001
Wireless Antenna Kit for use only with computer models equipped with an 802.11a/b/g or 802.11b/g
WLAN module (includes 2 transceivers and cables)
431399-001
Display Screw Kit
431420-001
Top cover trim for use with defeatured models
431421-001
Top cover trim for use with full-featured models
431430-001
Rubber Kit
431437-001
Power button board (includes power button board cable)
431439-001
ExpressCard assembly
431447-001
Speaker assembly
432309-001
90-watt non-PFC AC adapter
433281-001
Display bezel for use with computer models equipped with microphones
433289-001
Display hinge covers for use with defeatured computer models
434661-001
Broadcom 4321AGN 802.11a/b/g/n module for use in the MOW
434661-002
Broadcom 4321AGN 802.11a/b/g/n module for use in France, Germany, Italy, the Netherlands, Spain,
the United Kingdom, Nordic region, and India
434747-001
Screw Kit
Chapter 3 Illustrated parts catalog
Spare part
number
Description
434896-001
Fan/heat sink assembly for use only with computer models equipped with discrete graphics subsystem
memory (includes thermal material)
435743-001
HP Remote Control
436238-001
Optical wired mouse
436260-001
Display bezel for use with Best Buy computer models equipped with camera and microphones
436261-001
Display enclosure for use with Best Buy computer models
438368-001
Plastics Kit (see Plastics Kit on page 26 for more Plastics Kit component information)
439128-001
Windows Vista remote control (fits into ExpressCard slot)
439129-001
Infrared emitter with cable
439130-001
ATSC/NTSC/PAL TV tuner
439131-001
ATSC/NTSC TV tuner antenna
439254-001
Windows Vista remote control (does not fit into ExpressCard slot)
441075-001
Broadcom 4311AG 802.11a/b/g module for use in the United States and Canada
441075-002
Broadcom 4311AG 802.11a/b/g module for use in for use in France, Germany, Italy, the Netherlands,
Spain, the United Kingdom, Nordic region, India
441086-001
Intel 802.11a/b/g/n WLAN module for use in Antigua & Barbuda, Argentina, Aruba, the Bahamas,
Barbados, Bermuda, Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican
Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia,
Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay, the United States,
Venezuela, and Vietnam
441086-002
Intel 802.11a/b/g/n WLAN module for use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria,
Croatia, Cyprus, the Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany,
Greece, Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg,
Malta, Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar, Romania,
Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden,
Switzerland, Turkey, Ukraine, the United Kingdom, and Uzbekistan
441086-003
Intel 802.11a/b/g/n WLAN module for use in Australia, New Zealand, Pakistan, the People's Republic
of China, and South Korea
441086-291
Intel 802.11a/b/g/n WLAN module for use in Japan
441086-AD1
Intel 802.11a/b/g/n WLAN module for use in South Korea
441087-002
Intel 802.11a/b/g/n WLAN module for use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria,
Croatia, Cyprus, the Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany,
Greece, Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg,
Malta, Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar, Romania,
Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden,
Switzerland, Turkey, Ukraine, the United Kingdom, and Uzbekistan
441088-003
Intel 802.11a/b/g/n WLAN module for use in Australia, New Zealand, Pakistan, the People's Republic
of China, and South Korea
441089-291
Intel 802.11a/b/g/n WLAN module for use in Japan
441090-001
Broadcom 802.11b/g WLAN module for use in MOW
441090-002
Broadcom 802.11b/g WLAN module for use in ROW
441090-291
Broadcom 802.11b/g WLAN module for use in Japan
Sequential part number listing
33
34
Spare part
number
Description
441426-001
Keyboard for use in the United States with Best Buy computer models
441427-001
Keyboard for use in the United States
441427-031
Keyboard for use in the United Kingdom
441427-041
Keyboard for use in Germany
441427-051
Keyboard for use in France
441427-061
Keyboard for use in Italy
441427-071
Keyboard for use in Spain
441427-081
Keyboard for use in Denmark
441427-BG1
Keyboard for use in Switzerland
441427-121
Keyboard for use in French Canada
441427-131
Keyboard for use in Portugal
441427-141
Keyboard for use in Turkey
441427-DJ1
Keyboard for use in Greece
441427-161
Keyboard for use in Latin America
441427-171
Keyboard for use in Saudi Arabia
441427-221
Keyboard for use in the Czech Republic
441427-251
Keyboard for use in Russia
441427-281
Keyboard for use in Thailand
441427-291
Keyboard for use in Japan
441427-A41
Keyboard for use in Belgium
441427-AB1
Keyboard for use in Taiwan
441427-AD1
Keyboard for use in South Korea
441427-B31
Keyboard for use in the Netherlands and Europe
441427-BB1
Keyboard for use in Israel
441427-DH1
Keyboard for use in Finland, Norway, and Sweden
443689-031
Keyboard for use in the United Kingdom with Best Buy computer models
443689-051
Keyboard for use in France with Best Buy computer models
443689-061
Keyboard for use in Italy with Best Buy computer models
443689-071
Keyboard for use in Spain with Best Buy computer models
443689-131
Keyboard for use in Portugal with Best Buy computer models
443689-141
Keyboard for use in Turkey with Best Buy computer models
443689-171
Keyboard for use in Saudi Arabia with Best Buy computer models
443689-B31
Keyboard for use in the Netherlands and Europe with Best Buy computer models
443689-DH1
Keyboard for use in Finland, Norway, and Sweden with Best Buy computer models
Chapter 3 Illustrated parts catalog
Spare part
number
Description
445170-001
ExpressCard Kit (includes software CD)
446476-001
System board for use only with computer models with Intel processors equipped with discrete graphics
subsystem memory (includes 128 MB of graphics subsystem memory and thermal material)
446477-001
System board for use only with computer models with Intel processors equipped with UMA graphics
subsystem memory
446478-001
Intel Core Duo T7300 2.0-GHz processor (4-MB L2 cache; includes thermal material)
446479-001
Intel Core Duo T7100 1.8-GHz, processor (2-MB L2 cache; includes thermal material)
446480-001
15.4-inch, WXGA, BrightView display panel for use only with Best Buy computer models
446481-001
15.4-inch, WXGA, BrightView display assembly for use only with computer models equipped with a
camera and microphones
446482-001
15.4-inch, WXGA, BrightView display assembly for use only with computer models not equipped with a
camera
446483-001
Display bezel for use only with computer models equipped with a camera
446486-001
Camera module (includes 2-sided tape)
446487-001
Display enclosure
446494-001
512-MB memory module (667-MHz, PC2-5300, 1-DIMM)
446495-001
1024-MB memory module (667-MHz, PC2-5300, 1-DIMM)
446496-001
60-GB, 5400-rpm hard drive (includes hard drive bracket)
446497-001
80-GB, 5400-rpm hard drive (includes hard drive bracket)
446498-001
120-GB, 5400-rpm hard drive (includes hard drive bracket)
446499-001
DVD/CD-RW Combo Drive for use in computer models with Intel processors
446500-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive for use in computer models with Intel
processors
446501-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe for use in computer models
with Intel processors
446502-001
HD-ROM Drive for use in computer models with Intel processors
446506-001
6-cell, 2.20-Ah battery
446507-001
6-cell, 2.55-Ah battery
446508-001
Top cover for use only with computer models not equipped with a fingerprint reader (includes TouchPad
and cable)
446509-001
Top cover for use only with computer models equipped with a fingerprint reader (includes TouchPad and
cable and fingerprint reader board and cable)
446511-001
Fingerprint reader board for use in computer models with Intel processors (includes fingerprint reader
board cable)
446512-001
Switch cover (includes LED board and cable)
446513-001
Base enclosure for use only with full-featured models that use discrete graphics subsystem memory (includes
wireless switch actuator and infrared lens)
446518-001
RTC battery (includes 2-sided tape)
Sequential part number listing
35
36
Spare part
number
Description
446519-001
Cable Kit (see Cable Kit on page 28 for more Cable Kit component information)
446521-001
Fan/heat sink assembly for use only with computer models with Intel processor and equipped with UMA
graphics subsystem memory (includes thermal material)
446523-001
Audio board for use with full-featured models (includes audio connectors, audio board cable, and infrared
lens)
446524-001
USB/power connector board for use only with computer models that use a 90-watt AC adapter (includes
USB/power connector board cable)
446525-001
Display Label Kit for use with computer models with Intel processors
448004-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive for use in computer models with AMD
processors
448006-001
HD-ROM Super Multi Double-Layer Combo Drive with LightScribe for use in computer models with AMD
processors
448342-001
Base enclosure for use only with full-featured computer models with Intel processors that use UMA graphics
subsystem memory (includes wireless switch actuator and infrared lens)
449454-001
USB/power connector board for use only with computer models that use a 65-watt AC adapter (includes
USB/power connector board cable)
449727-001
Wireless Antenna Kit for use only with computer models equipped with an 802.11a/b/g/n WLAN module
(includes 3 transceivers and cables)
449729-001
RTC battery (includes 2-sided tape)
449902-001
System board (includes modem cable and thermal material) for use only in full-featured computer models
with AMD processors equipped with discrete graphics subsystem memory
449903-001
System board (includes modem cable and thermal material) for use only in full-featured computer models
with AMD processors equipped with UMA graphics subsystem memory
449904-001
AMD Turion MK-38 processor (2.2-GHz, 512-MB L2 cache)
449935-001
DVD±RW and DVD-ROM Super Multi Drive with LightScribe for use in computer models with AMD
processors
449937-001
CD-RW and DVD-ROM Combo Drive for use in computer models with AMD processors
449942-001
Top cover for use only in full-featured computer models with AMD processors equipped with a fingerprint
reader (includes TouchPad, TouchPad cable, fingerprint reader board, and fingerprint reader board
cable)
449944-001
Fingerprint reader board for use in computer models with AMD processors (includes fingerprint reader
board cable)
449955-001
Cable Kit (see Cable Kit on page 28 for more Cable Kit component information)
449960-001
Fan/heat sink assembly for use only with computer models with AMD processors and equipped with
discrete graphics subsystem memory (includes thermal material)
449967-001
Audio board for use with defeatured models (includes audio connectors, audio board cable, and infrared
lens)
449972-001
Display Label Kit for use with computer models with AMD processors
450370-001
Processor bracket for use with 7.9 processors
450371-001
Processor bracket for use with 8.1 processors
450801-001
AMD Turion TL-56 processor (1.8-GHz, 1-MB L2 cache)
Chapter 3 Illustrated parts catalog
Spare part
number
Description
450802-001
AMD Turion TL-58 processor (1.9-GHz, 1-MB L2 cache)
450803-001
AMD Turion TL-60 processor (2.0-GHz, 1-MB L2 cache)
450804-001
AMD Turion TL-66 processor (2.3-GHz, 1-MB L2 cache)
450933-001
Fan/heat sink assembly for use only with computer models with Intel processors and equipped with discrete
graphics subsystem memory (includes thermal material)
451013-001
AMD Athlon TK-53 processor (1.7-GHz. 512-MB L2 cache)
451408-001
Top cover for use only in defeatured computer models with AMD processors equipped with a fingerprint
reader (includes TouchPad, TouchPad cable, fingerprint reader board, and fingerprint reader board
cable)
451860-001
Fan/heat sink assembly for use only with computer models with AMD processors and equipped with UMA
graphics subsystem memory (includes thermal material)
451861-001
Intel 802.11a/b/g WLAN module for use in Antigua & Barbuda, Argentina, Australia, the Bahamas,
Barbados, Brunei, Canada, Chile, the Dominican Republic, Guam, Guatemala, Hong Kong, India,
Indonesia, Malaysia, Mexico, New Zealand, Panama, Paraguay, Saudi Arabia, Taiwan, the United
States, and Vietnam
451861-002
Intel 802.11a/b/g WLAN module for use in Aruba, Austria, Azerbaijan, Bahrain, Belgium, Bermuda,
Brazil, Bulgaria, the Cayman Islands, Colombia, Croatia, Cyprus, the Czech Republic, Denmark, Egypt,
El Salvador, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Jordan, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, the Netherlands, Norway,
Oman, the Philippines, Poland, Portugal, Romania, Russia, Serbia and Montenegro, Singapore, Slovakia,
Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, the United Kingdom, and
Uzbekistan
451861-003
Intel 802.11a/b/g WLAN module for use in Ecuador, Haiti, Honduras, Pakistan, the People's Republic
of China, Peru, Qatar, South Korea, Uruguay, and Venezuela
451861-004
Intel 802.11b/g WLAN module for use in Thailand
451861-291
Intel 802.11a/b/g WLAN module for use in Japan
451862-001
160-GB, 5400-rpm hard drive (includes hard drive bracket)
451863-001
200-GB, 4200-rpm hard drive (includes hard drive bracket)
451864-001
12-cell, 8.80-Ah battery
452634-001
Top cover for use only with Best Buy computer models not equipped with a fingerprint reader (includes
TouchPad and cable)
452635-001
Top cover for use only with Best Buy computer models equipped with a fingerprint reader (includes
TouchPad and cable and fingerprint reader board and cable)
452636-001
Keyboard for use in the United States with Best Buy computer models
452636-031
Keyboard for use in the United Kingdom with Best Buy computer models
452636-051
Keyboard for use in France with Best Buy computer models
452636-061
Keyboard for use in Italy with Best Buy computer models
452636-071
Keyboard for use in Spain with Best Buy computer models
452636-131
Keyboard for use in Portugal with Best Buy computer models
452636-141
Keyboard for use in Turkey with Best Buy computer models
452636-171
Keyboard for use in the United Kingdom with Best Buy computer models
Sequential part number listing
37
38
Spare part
number
Description
452636-B31
Keyboard for use in the Netherlands and Europe with Best Buy computer models
452636-DH1
Keyboard for use in Finland, Norway, and Sweden with Best Buy computer models
453033-001
Intel Core Duo T5250 1.5-GHz processor (2-MB L2 cache; includes thermal material)
453198-001
90-watt PFC AC adapter
453199-001
65-watt PFC AC adapter
453769-001
System board for use only with computer models with Intel processors equipped with UMA graphics
subsystem memory (includes thermal material)
453771-001
Intel Core 2 Duo 2.2-GHz processor (4-MB L2 cache, 800-MHz FSB; includes thermal material)
453772-001
Intel Core 2 Duo 1.5-GHz processor (2-MB L2 cache, 667-MHz FSB; includes thermal material)
453773-001
Intel Core 2 Duo 1.86-GHz processor (1-MB L2 cache, 553-MHz FSB; includes thermal material)
453774-001
2048-MB memory module (PC2-5300, DDR2, 667-MHz )
453775-001
250-GB, 5400-rpm hard drive (includes hard drive bracket)
454166-001
System board (includes modem cable and thermal material) for use only in defeatured computer models
with AMD processors equipped with UMA graphics subsystem memory
454172-001
Base enclosure for use only in defeatured models with AMD processors (includes wireless switch actuator
and infrared lens)
455197-001
15.4-inch, WXGA, BrightView, display assembly with plain painted top for use with computer models with
AMD processors
455311-001
15.4-inch, WXGA, BrightView display panel for use only with Best Buy computer models equipped with
a camera, microphones, and a fingerprint reader
455312-001
15.4-inch, WXGA, BrightView display panel for use only with Best Buy computer models equipped with
a camera and microphones
455313-001
Display bezel for use only with Best Buy computer models not equipped with a camera (includes openings
for microphones)
455515-001
Intel Core 2 Duo 2.0-GHz processor (2-MB L2 cache, 800-MHz FSB; includes thermal material)
Chapter 3 Illustrated parts catalog
4
Removal and replacement
procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Hex 5.0-mm nut driver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
Service considerations
The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.
Preliminary replacement requirements
39
Cables and connectors
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations
during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat
or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In
all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with extreme
care; these cables tear easily.
Drive handling
CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the
computer, damage to a drive, or loss of information, observe these precautions:
Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer
is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and be
sure that the optical drive tray is closed.
Handle drives on surfaces covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.
Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective
packaging and label the package “FRAGILE.”
40
Chapter 4 Removal and replacement procedures
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure
determine the degree of sensitivity. Networks built into many integrated circuits provide some protection,
but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.
An electronic device exposed to ESD may not be affected at all and can work perfectly throughout a
normal cycle. Or the device may function normally for a while, then degrade in the internal layers,
reducing its life expectancy.
CAUTION: To prevent damage to the computer when you are removing or installing internal
components, observe these precautions:
Keep components in their electrostatic-safe containers until you area ready to install them.
Use nonmagnetic tools.
Before touching an electronic component, discharge static electricity by using the guidelines described in
this section.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.
The following table shows how humidity affects the electrostatic voltage levels generated by different
activities.
CAUTION: A product can be degraded by as little as 700 V.
Typical electrostatic voltage levels
Relative humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
Preliminary replacement requirements
41
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
●
To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
●
Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.
●
Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
●
Place items on a grounded surface before removing items from their containers.
●
Always be properly grounded when touching a component or assembly.
●
Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive foam.
●
Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that mechanized
equipment used for moving materials is wired to ground and that proper materials are selected to
avoid static charging. When grounding is not possible, use an ionizer to dissipate electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
42
●
Cover the workstation with approved static-shielding material.
●
Use a wrist strap connected to a properly grounded work surface and use properly grounded tools
and equipment.
●
Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
●
When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe
materials.
●
Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and
Styrofoam.
●
Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these
items only at static-free workstations.
●
Avoid contact with pins, leads, or circuitry.
●
Turn off power and input signals before inserting or removing connectors or test equipment.
Chapter 4 Removal and replacement procedures
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
●
When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps
with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground,
wear a strap snugly against the skin at all times. On grounded mats with banana-plug connectors,
use alligator clips to connect a wrist strap.
●
When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can
be used at standing workstations and are compatible with most types of shoes or boots. On
conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one megohm
resistance between the operator and ground. To be effective, the conductive strips must be worn in
contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
●
Antistatic tape
●
Antistatic smocks, aprons, and sleeve protectors
●
Conductive bins and other assembly or soldering aids
●
Nonconductive foam
●
Conductive tabletop workstations with ground cords of one megohm resistance
●
Static-dissipative tables or floor mats with hard ties to the ground
●
Field service kits
●
Static awareness labels
●
Material-handling packages
●
Nonconductive plastic bags, tubes, or boxes
●
Metal tote boxes
●
Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
Material
Use
Voltage protection level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
Preliminary replacement requirements
43
Unknown user password
If the computer you are servicing has an unknown user password, follow these steps to clear the password.
NOTE: These steps also clear CMOS.
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the RTC battery (see RTC battery on page 55).
6.
Wait approximately 5 minutes.
7.
Replace the RTC battery and reassemble the computer.
8.
Connect AC power to the computer. Do not reinsert any batteries at this time.
9.
Turn on the computer.
All passwords and all CMOS settings have been cleared.
44
Chapter 4 Removal and replacement procedures
Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 83 screws and standoffs, in 12 different sizes, that must be removed, replaced, or
loosened when servicing the computer. Make special note of each screw and standoff size and location
during removal and replacement.
Serial number
Report the computer serial number to HP when requesting information or ordering spare parts. The serial
number is located on the bottom of the computer.
Component replacement procedures
45
Battery
Description
Spare part number
12-cell, 8.80-Ah Li-ion battery
451864-001
6-cell, 2.55-Ah Li-ion battery
446507-001
6-cell, 2.20-Ah Li-ion battery
446506-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
Remove the battery:
1.
Turn the computer upside down on a flat surface.
2.
Slide the battery release latch (1) to release the battery.
3.
Pivot the battery (2) upward and remove it from the computer.
To insert the battery, insert the rear edge of the battery into the battery bay and pivot the battery downward
until it is seated. The battery release latch automatically locks the battery into place.
46
Chapter 4 Removal and replacement procedures
Camera module
NOTE: If it has been determined that the camera module is the component that must be replaced to
complete the computer repair, the display assembly does not have to be removed. Follow the procedures
in this section to replace the camera module. For information on replacing the display assembly and other
display assembly internal components, see Display assembly on page 68.
Description
Spare part number
Camera module (includes 2-sided tape)
446486-001
Before removing the camera module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
Remove the camera module:
1.
Turn the computer display-side up, with the front toward you.
2.
Open the computer as far as possible.
3.
Remove the four rubber screw covers (1) on the display bezel top edge.
NOTE: The display rubber screw covers are included in the Display Screw Kit, spare part number
431399-001.
4.
Remove the four Phillips PM2.5×5.0 screws (2) on the display bezel top edge.
5.
Flex the inside edges of the left and right sides (1) and the top edge (2) of the display bezel until
the bezel disengages from the display enclosure.
Component replacement procedures
47
6.
Release the display bezel top edge (3).
7.
Release the camera module (1) from the display enclosure as far as the camera module cable allows.
8.
Disconnect the camera module cable (2) from the camera module.
9.
Remove the camera module.
Reverse this procedure to install the camera module.
48
Chapter 4 Removal and replacement procedures
Display inverter
NOTE: If it has been determined that the display inverter is the component that must be replaced to
complete the computer repair, the display assembly does not have to be removed. Follow the procedures
in this section to replace the display inverter. For information on replacing the display assembly and other
display assembly internal components, see Display assembly on page 68.
Description
Spare part number
Display inverter (includes 2-sided tape)
431391-001
Before removing the display inverter, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
Remove the display inverter:
1.
Turn the computer display-side up, with the front toward you.
2.
Open the computer as far as possible.
3.
Remove the two rubber screw covers (1) on the display bezel bottom edge. The display rubber screw
covers are included in the Display Screw Kit, spare part number 431399-001.
4.
Remove the two Phillips PM2.5×5.0 screws (2) that secure the display bezel bottom edge to the
display assembly.
5.
Flex the inside edges of the left and right sides (1) and the bottom edge (2) of the display bezel until
the bezel disengages from the display enclosure.
Component replacement procedures
49
6.
Release the display bezel bottom edge (3).
7.
Release the display inverter (1) as far as the display panel cable and the backlight cable allow.
8.
Disconnect the display panel cable (2) and the backlight cable (3) from the display inverter.
9.
Remove the display inverter.
Reverse this procedure to install the display inverter.
50
Chapter 4 Removal and replacement procedures
Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket.
Description
Spare part number
250-GB, 5400-rpm
453775-001
200-GB, 4200-rpm
451863-001
160-GB, 5400-rpm
451862-001
120-GB, 5400-rpm
446498-001
80-GB, 5400-rpm
446497-001
60-GB, 5400-rpm
446496-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.0×5.0 screws (1) that secure the hard drive cover to the computer.
3.
Lift the right side of the hard drive cover (2), swing it to left, and remove the cover. The hard drive
cover is included in the Plastics Kit, spare part number 438368-001.
Component replacement procedures
51
4.
Use the Mylar tab (1) to lift the hard drive (2) until it disconnects from the computer.
5.
Remove the hard drive from the hard drive bay.
6.
If it is necessary to remove the hard drive bracket, remove the four Phillips PM3.0×3.0 hard drive
bracket screws (1) that secure the hard drive bracket to the hard drive.
7.
Lift the bracket (2) straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
52
Chapter 4 Removal and replacement procedures
Computer feet
Description
Spare part number
Rubber Kit (includes base enclosure rubber feet and display bezel screw covers)
431430-001
The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the locations
illustrated below.
Memory module
Description
Spare part number
2048-MB (PC2-5300, 667-MHz, DDR2)
453774-001
1024-MB (PC2-5300, 667-MHz, DDR2)
446495-001
512-MB (PC2-5300, 667-MHz, DDR2)
446494-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
Remove the memory module:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.0×5.0 screws (1) that secure the memory/WLAN module compartment
cover to the computer.
Component replacement procedures
53
3.
Lift the left side of the cover (2), swing it to the right, and remove the cover. The memory/WLAN
module compartment cover is included in the Plastics Kit, spare part number 438368-001.
4.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The edge of the module opposite the slot rises away from the computer.)
5.
Remove the module (2) by pulling it away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the
memory module slot.
Reverse this procedure to install a memory module.
54
Chapter 4 Removal and replacement procedures
RTC battery
NOTE: Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all passwords
and CMOS settings to be cleared.
Description
Spare part number
RTC battery (includes 2-sided tape)
446518-001 and
449729-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the memory/WLAN module compartment cover (see Memory module on page 53).
Remove the RTC battery:
1.
Disconnect the RTC battery cable (1) from the system board.
2.
Remove the RTC battery (2).
Reverse this procedure to install the RTC battery.
Component replacement procedures
55
WLAN module
Description
Spare part number
Intel 802.11a/b/g/n WLAN modules:
●
For use in Antigua & Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda, Brunei,
Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic, Ecuador,
El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia,
Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay, the United States,
Venezuela, and Vietnam
441086-001
●
For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the Czech
Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece, Hungary,
Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta,
Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar, Romania,
Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka,
Sweden, Switzerland, Turkey, Ukraine, the United Kingdom, and Uzbekistan
441086-002 and
441087-002
●
For use in Australia, New Zealand, Pakistan, and the People's Republic of China
441086-003 and
441088-003
●
For use in Japan
441086-291 and
441089-291
●
For use in South Korea
441086-AD1
Intel 802.11a/b/g WLAN modules:
●
For use in Antigua & Barbuda, Argentina, Australia, the Bahamas, Barbados, Brunei, Canada,
Chile, the Dominican Republic, Guam, Guatemala, Hong Kong, India, Indonesia, Malaysia,
Mexico, New Zealand, Panama, Paraguay, Saudi Arabia, Taiwan, the United States, and
Vietnam
451861-001
●
For use in Aruba, Austria, Azerbaijan, Bahrain, Belgium, Bermuda, Brazil, Bulgaria, the Cayman
Islands, Colombia, Croatia, Cyprus, the Czech Republic, Denmark, Egypt, El Salvador, Estonia,
Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Italy, Jordan, Latvia,
Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, the Netherlands, Norway,
Oman, the Philippines, Poland, Portugal, Romania, Russia, Serbia and Montenegro, Singapore,
Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, the United
Kingdom, and Uzbekistan
451861-002
●
For use in Ecuador, Haiti, Honduras, Pakistan, the People's Republic of China, Peru, Qatar, South
Korea, Uruguay, and Venezuela
451861-003
●
For use in Japan
451861-291
Broadcom 802.11b/g WLAN modules:
56
●
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the
United States
441090-001
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados,
Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia & Herzegovina Botswana,
Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon,
Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa
Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican
Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia,
Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar,
Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras,
Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica,
Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the
Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru,
441090-002
Chapter 4 Removal and replacement procedures
Description
Spare part number
Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China,
Peru, the Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia,
Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia and
Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands,
Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent &
Grenada, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand,
Togo, Tonga, Trinidad & Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the
United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam,
Yemen, Zaire, Zambia, and Zimbabwe
●
441090-291
For use in Japan
Intel 802.11b/g WLAN module for use in Thailand
451861-004
Broadcom 4311AG 802.11a/b/g modules:
●
For use in the United States and Canada
441075-001
●
For use in France, Germany, Italy, the Netherlands, Spain, the United Kingdom, Nordic region,
and India
441075-002
Broadcom 4321AGN 802.11a/b/g/n modules:
●
For use in the United States and Canada
434661-001
●
For use in France, Germany, Italy, the Netherlands, Spain, the United Kingdom, Nordic region,
and India
434661-002
Before removing the WLAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the memory/WLAN module compartment cover (see Memory module on page 53).
Remove the WLAN module:
1.
Disconnect the two WLAN antenna cables (1) from the WLAN module.
NOTE: The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The
white WLAN antenna cable is connected to the WLAN module “Aux” terminal.
NOTE: Computer models equipped with an 802.11a/b/g/n WLAN module will have an
additional wireless antenna cable (2), yellow in color.
2.
Remove the two Phillips PM2.0×3.0 screws (3) that secure the WLAN module to the computer. (The
edge of the module opposite the slot rises away from the computer.)
Component replacement procedures
57
3.
Remove the WLAN module (4) by pulling it away from the slot at an angle.
NOTE: WLAN modules are designed with a notch (5) to prevent incorrect installation into the
WLAN module slot.
Reverse this procedure to install a WLAN module.
58
Chapter 4 Removal and replacement procedures
Optical drive
NOTE:
All optical drive spare part kits include an optical drive bezel.
Description
Spare part number
For use in computer models with Intel processors:
HD-ROM Drive
446502-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
446501-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
446500-001
DVD/CD-RW Combo Drive
446499-001
For use in computer models with AMD processors:
CD-RW and DVD-ROM Combo Drive
449937-001
DVD±RW and DVD-ROM Super Multi Drive with LightScribe
449935-001
HD-ROM Super Multi Double-Layer Combo Drive with LightScribe
448006-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
448004-001
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
Remove the optical drive:
1.
Position the computer with right side toward you.
2.
Remove the Phillips PM2.5×7.0 screw (1) that secures the optical drive to the computer.
3.
Insert a thin tool, such as a paper clip (2), into the release access. (The optical drive disc tray is
partially ejected from the optical drive.)
Component replacement procedures
59
4.
Use the disc tray frame to slide the optical drive (3) out of the computer.
5.
If it is necessary to replace the optical drive bracket, position the optical drive with the optical drive
bracket toward you.
6.
Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical
drive.
7.
Remove the optical drive bracket (2).
Reverse the above procedure to reassemble and install the optical drive.
60
Chapter 4 Removal and replacement procedures
Switch cover
Description
Spare part number
Switch cover (includes LED board and cable)
446512-001
Before removing the switch cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
Remove the switch cover:
1.
Remove the three Phillips PM2.5×5.0 screws that secure the switch cover to the computer.
2.
Turn the computer display-side up, with the front toward you.
3.
Open the computer as far as possible.
Component replacement procedures
61
4.
Lift the rear edge of the switch cover and swing it forward until it rests on the keyboard.
5.
Release the zero insertion force (ZIF) connector (1) to which the power button board is connected,
and disconnect the cable from the power button board.
6.
Disconnect the microphone cable (2) from the power button board.
7.
Release the ZIF connector (3) to which the LED board is connected and disconnect the cable from
the power button board.
8.
Remove the switch cover.
Reverse this procedure to install the switch cover.
62
Chapter 4 Removal and replacement procedures
Speaker assembly
Description
Spare part number
Speaker assembly
431447-001
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the switch cover (see Switch cover on page 61).
6.
Remove the keyboard (see Keyboard on page 65).
Remove the speaker assembly:
1.
Disconnect the speaker assembly cable (1) from the power button board.
2.
Remove the two Phillips PM2.5×2.0 screws (2) that secure the speaker assembly to the computer.
3.
Remove the speaker assembly (3).
Reverse this procedure to install the speaker assembly.
Component replacement procedures
63
Power button board
Description
Spare part number
Power button board (includes power button board cable)
431437-001
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the switch cover (see Switch cover on page 61).
6.
Remove the keyboard (see Keyboard on page 65).
Remove the power button board:
1.
Remove the Phillips PM2.0×3.0 screw (1) that secures the power button board to the fan/heat sink
assembly.
2.
Remove the power button board (2) from the switch cover.
3.
Remove the power button board.
Reverse this procedure to install the power button board.
64
Chapter 4 Removal and replacement procedures
Keyboard
For use only with computer models not sold at Best Buy:
Belgium
441427-A41
The Netherlands and Europe
441427-B3
The Czech Republic
441427-211
Portugal
441427-131
Denmark
441427-081
Russia
441427-251
Finland, Norway, and Sweden
441427-DH1
Saudi Arabia
441427-171
France
441427-051
South Korea
441427-AD1
French Canada
441427-121
Spain
441427-071
Germany
441427-041
Switzerland
441427-BG1
Greece
441427-DJ1
Taiwan
441427-AB1
Israel
441427-BB1
Thailand
441427-281
Italy
441427-061
Turkey
441427-141
Japan
441427-291
The United Kingdom
441427-031
Latin America
441427-161
The United States
441427-001
For use only with computer models sold at Best Buy:
Finland, Norway, and Sweden
443689-DH1
and 452636DH1
Saudi Arabia
443689-171 and
452636-171
France
443689-051
and
452636-051
Spain
443689-071 and
452636-071
Italy
443689-061
and
452636-061
Turkey
443689-141 and
452636-141
The Netherlands and Europe
443689-B31
and 452636B31
The United Kingdom
443689-031 and
452636-031
Portugal
443689-131
and
452636-131
The United States
441426-001 and
452636-001
Before removing the keyboard, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the switch cover (see Switch cover on page 61).
Component replacement procedures
65
Remove the keyboard:
66
1.
Turn the computer upside down, with the front toward you.
2.
Remove the four Phillips PM2.5×7.0 screws that secure the keyboard to the computer.
3.
Turn the computer display-side up, with the front toward you.
4.
Open the computer as far as possible.
5.
Lift the rear edge of the keyboard (1) until it rests at an angle.
6.
Release the keyboard (2) by sliding it back to disengage the tabs on the front edge of the keyboard
from the top cover.
7.
Swing the keyboard (3) up and forward until it rests on the palm rest.
Chapter 4 Removal and replacement procedures
8.
Release the ZIF connector (1) to which the keyboard cable is attached and disconnect the keyboard
cable (2) from the system board.
9.
Remove the keyboard.
Reverse this procedure to install the keyboard.
NOTE: The power button board cable and LED board cable are included in the Cable Kit, spare part
number 446519-001.
Component replacement procedures
67
Display assembly
Description
Spare part number
15.4-inch, WXGA, BrightView, display assembly for use only with computer models equipped with a
camera (includes camera, microphones, and WLAN transceivers and antenna cables)
446481-001
15.4-inch, WXGA, BrightView, display assembly for use only with computer models not equipped
with a camera (includes microphones and WLAN transceivers and antenna cables)
446482-001
15.4-inch, WXGA, BrightView, display assembly for use only with Best Buy computer models equipped
with a camera, microphones, and a fingerprint reader (includes camera, microphones, and WLAN
transceivers and antenna cables)
455311-001
15.4-inch, WXGA, BrightView, display assembly for use only with Best Buy computer models equipped
with a camera (includes camera, microphones, and WLAN transceivers and antenna cables)
455312-001
15.4-inch, WXGA, BrightView, display assembly with plain painted top for use with computer models
with AMD processors
455197-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the memory/WLAN module compartment cover (see Memory module on page 53).
6.
Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 56).
7.
Remove the following components:
a.
Keyboard (see Keyboard on page 65)
b.
Switch cover (see Switch cover on page 61)
c.
Speaker assembly (see Speaker assembly on page 63)
Remove the display assembly:
1.
68
Close the computer and turn it upside down, with the rear panel toward you.
Chapter 4 Removal and replacement procedures
2.
Remove the Phillips PM2.5×7.0 screws that secure the display assembly to the computer.
3.
Turn the computer display-side up, with the front toward you.
4.
Open the computer to an upright position.
5.
Disconnect the following cables:
(1) Display panel cable
(2) Microphone cable
(3) Camera cable
6.
Remove the wireless antenna cables (4) from the routing channels (5) built into the top cover.
CAUTION: Support the display assembly when removing the following screws. Failure to support
the display assembly can result in damage to the display assembly and other computer components.
7.
Remove the two Phillips PM2.5×7.0 screws (1) that secure the display assembly to the computer.
Component replacement procedures
69
8.
Remove the display assembly (2).
9.
If it is necessary to replace the display bezel or any of the display assembly internal components,
remove the following:
(1) Four rubber screw covers on the display bezel top edge
(2) Two rubber screw covers on the display bezel bottom edge
(3) Six Phillips PM2.5×5.0 screws
NOTE: The display rubber screw covers are included in the Display Screw Kit, spare part number
431399-001.
10. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
bezel until the bezel disengages from the display enclosure.
70
Chapter 4 Removal and replacement procedures
11. Remove the display bezel (3). Display bezels are available using spare part numbers 446483-001
(for use only with computer models equipped with a camera), 433281-001 (for use only with
computer models not equipped with a camera), 436260-001 (for use only with Best Buy computer
models equipped with a camera), and 455313-001 (for use only with Best Buy computer models
not equipped with a camera).
NOTE: See Camera module on page 47 for camera module replacement instructions. See Display
inverter on page 49 for display inverter replacement instructions.
12. If it is necessary to replace the display panel, remove the six Phillips PM2.5×4.0 screws (1) that
secure the display panel to the display enclosure.
13. Remove the display panel (2). The display panel is available using the spare part number
446480-001.
14. If it is necessary to replace the display hinges, remove the left and right hinge covers (1) by sliding
them off the display hinges. The display hinge covers are available using spare part number
431396-001 for full-featured models or 433289-001 for defeatured models.
15. Remove the two Phillips PM2.0×3.0 screws that secure each display hinge (2) to the display
panel.
Component replacement procedures
71
16. Remove the display hinges (3). The display hinges are available using spare part number
431395-001.
17. If it is necessary to replace the wireless antenna transceivers and cables, remove the Phillips
PM2.0×3.0 screw (1) that secures each transceiver to the display enclosure.
18. Remove the wireless antenna cables from the clips (2) built into the display enclosure.
19. Detach the wireless antenna transceivers (3) from the display enclosure and remove the transceivers
and cables (4). The wireless antenna transceivers and cables are available using the following spare
part numbers 449727-001 (for use only with computer models equipped with an 802.11a/b/g/n
WLAN module) and 431398-001 (for use only with computer models equipped with an 802.11a/
b/g or 802.11b/g WLAN module).
20. If it is necessary to replace the microphones and cables, release the retention tabs (1) built into the
display enclosure that secure the microphone cables to the display enclosure
21. Remove the microphone receivers (2) from the clips in the display enclosure.
72
Chapter 4 Removal and replacement procedures
22. Remove the microphone cables (3) from the display enclosure. The microphones and cables are
available using spare part number 431393-001.
23. If it is necessary to replace the camera cable, release the retention tabs (1) built into the display
enclosure that secure the camera cable to the display enclosure.
24. Remove the camera cable (2) from the display enclosure. The camera cable is included in the Display
Cable Kit, spare part number 431394-001.
Reverse this procedure to reassemble and install the display assembly.
Component replacement procedures
73
Top cover
Description
Spare part number
For use only in computer models with Intel processors:
●
Equipped with a fingerprint reader (includes TouchPad and cable and fingerprint reader board
and cable)
446509-001
●
Not equipped with a fingerprint reader (includes TouchPad and cable)
446508-001
●
Sold at Best Buy equipped with a fingerprint reader (includes TouchPad and cable and fingerprint
reader board and cable)
452635-001
●
Sold at Best Buy not equipped with a fingerprint reader (includes TouchPad and cable)
452634-001
●
Fingerprint reader board (includes fingerprint reader board cable)
446511-001
For use only in computer models with AMD processors:
●
In full-featured models equipped with a fingerprint reader (includes TouchPad, TouchPad cable,
fingerprint reader board, and fingerprint reader board cable)
449942-001
●
In defeatured models equipped with a fingerprint reader (includes TouchPad, TouchPad cable,
fingerprint reader board, and fingerprint reader board cable)
451408-001
●
Fingerprint reader board (includes fingerprint reader board cable)
449944-001
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Disconnect the power button board cable and the LED board cables from the system board (see
Keyboard on page 65).
6.
Remove the following components:
a.
Hard drive (see Hard drive on page 51)
b.
Optical drive (see Optical drive on page 59)
c.
Switch cover (see Switch cover on page 61)
d.
Keyboard (see Keyboard on page 65)
e.
Speaker assembly (see Speaker assembly on page 63)
f.
Display assembly (see Display assembly on page 68)
Remove the top cover:
1.
74
Remove the power button board cable and LED button board cable from the clips (1) built into the
top cover.
Chapter 4 Removal and replacement procedures
2.
Disconnect the power button board cable (2) and the LED button board cable (3) from the low
insertion force (LIF) connectors on the system board.
3.
Remove the power button board cable and LED board cable.
4.
Turn the computer upside down, with the front toward you.
5.
Remove the nine Phillips PM2.5×7.0 screws that secure the top cover to the computer.
Component replacement procedures
75
6.
Remove the following:
(1) Three Phillips PM2.5×2.0 screws in the optical drive bay
(2) One Phillips PM2.5×5.0 screw on the rear edge of the base enclosure
(3) Three Phillips PM2.5×7.0 screws on the rear edge of the base enclosure that secure the top cover
trim to the computer
(4) Two HM5.0×9.0 standoffs in the memory/WLAN module compartment
7.
Turn the computer right-side up, with the front toward you.
8.
Release and disconnect the TouchPad cable (1) from the ZIF connector on the system board.
9.
Remove the following screws:
(2) Two Phillips PM2.5×7.0 screws
(3) Two Phillips PM2.5×4.0 screws
(4) One Phillips PM2.5×5.0 screw that secures the top cover trim to the computer
76
Chapter 4 Removal and replacement procedures
10. Remove the top cover trim (1). The top cover trim is available using spare part number
431421-001.
11. Lift the rear edge of the top cover (2) until it disengages from the computer.
12. Remove the top cover.
Reverse this procedure to install the top cover and top cover trim.
Component replacement procedures
77
Bluetooth module
Description
Spare part number
Bluetooth module (includes Bluetooth module cable)
412766-002
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 51)
b.
Optical drive (see Optical drive on page 59)
c.
Switch cover (see Switch cover on page 61)
d.
Keyboard (see Keyboard on page 65)
e.
Speaker assembly (see Speaker assembly on page 63)
f.
Display assembly (see Display assembly on page 68)
g.
Top cover (see Top cover on page 74)
Remove the Bluetooth module:
78
1.
Disconnect the Bluetooth module cable (1) from the system board.
2.
Remove the two Phillips PM2.0×2.0 screws (2) that secure the Bluetooth module to the system board.
Chapter 4 Removal and replacement procedures
3.
Remove the Bluetooth module (3).
Reverse this procedure to install the Bluetooth module.
ExpressCard assembly
Description
Spare part number
ExpressCard assembly
431439-001
Before removing the ExpressCard assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 51)
b.
Optical drive (see Optical drive on page 59)
c.
Switch cover (see Switch cover on page 61)
d.
Keyboard (see Keyboard on page 65)
e.
Speaker assembly (see Speaker assembly on page 63)
f.
Display assembly (see Display assembly on page 68)
g.
Top cover (see Top cover on page 74)
Component replacement procedures
79
Remove the ExpressCard assembly:
1.
Press the ExpressCard slot bezel (1) to release the bezel from the ExpressCard slot.
2.
Remove the ExpressCard slot bezel (2). The ExpressCard slot bezel is included in the Plastics Kit,
spare part number 438368-001.
3.
Remove the four Phillips PM2.5×4.0 screws (1) that secure the ExpressCard assembly to the system
board.
4.
Disconnect the ExpressCard assembly (2) from the system board by sliding to the right.
5.
Remove the ExpressCard assembly (3).
Reverse this procedure to install the ExpressCard assembly.
80
Chapter 4 Removal and replacement procedures
USB/power connector board
Description
Spare part number
For use only with computer models using a 90-watt AC adapter
446524-001
For use only with computer models using a 65-watt AC adapter
449454-001
Before removing the USB/power connector board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 51)
b.
Optical drive (see Optical drive on page 59)
c.
Switch cover (see Switch cover on page 61)
d.
Keyboard (see Keyboard on page 65)
e.
Speaker assembly (see Speaker assembly on page 63)
f.
Display assembly (see Display assembly on page 68)
g.
Top cover (see Top cover on page 74)
Remove the USB/power connector board:
1.
Remove the two Phillips PM2.5×4.0 screws (1) that secure the USB/power connector board to the
computer.
2.
Release the USB/power connector board (2) as far as the USB/power connector board cable will
allow.
Component replacement procedures
81
3.
Disconnect the USB cable (3) and the power connector cable (4) from the USB/power connector
board.
4.
Remove the USB/power connector board.
Reverse this procedure to install the USB/power connector board.
System board
NOTE: All system board spare part kits include a modem cable and replacment thermal material.
Description
Spare part number
For use only in computer models with Intel processors:
●
Equipped with discrete graphics subsystem memory (includes 128 MB of discrete graphics
subsystem memory)
446476-001
●
In full-featured models equipped with UMA graphics subsystem memory
446477-001
●
In defeatured models equipped with UMA graphics subsystem memory
453769-001
For use only in computer models with AMD processors:
●
In full-featured models equipped with discrete graphics subsystem memory
449902-001
●
In full-featured models equipped with UMA graphics subsystem memory
449903-001
●
In defeatured models equipped with UMA graphics subsystem memory
454166-001
Before removing the system board, follow these steps:
82
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
Chapter 4 Removal and replacement procedures
4.
Remove the battery (see Battery on page 46).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 51)
b.
Optical drive (see Optical drive on page 59)
c.
Switch cover (see Switch cover on page 61)
d.
Keyboard (see Keyboard on page 65)
e.
Speaker assembly (see Speaker assembly on page 63)
f.
Display assembly (see Display assembly on page 68)
g.
Top cover (see Top cover on page 74)
h.
Audio board (see Audio board on page 86)
i.
USB/power connector board (see USB/power connector board on page 81)
When replacing the system board, be sure that the following components are removed from the defective
system board and installed on the replacement system board:
●
Memory modules (see Memory module on page 53)
●
RTC battery (see RTC battery on page 55)
●
WLAN module (see WLAN module on page 56)
●
Bluetooth module (see Bluetooth module on page 78)
●
ExpressCard assembly (see ExpressCard assembly on page 79)
●
Fan/heat sink assembly (see Fan/heat sink assembly on page 87)
●
Processor (see Processor on page 89)
Remove the system board:
1.
Remove the USB/power connector board cable (1) from the clips built into in the base enclosure.
Component replacement procedures
83
84
2.
Remove the two Phillips PM2.5×4.0 screws (2) that secure the system board to the base enclosure.
3.
Use the optical drive connector (1) to lift the right side of the system board (2) until it rests at an
angle.
4.
Disconnect the audio board cable (3) from the system board.
5.
Release the system board (4) by sliding it to the right until the connectors on the left side of the system
board disengage from the base enclosure.
6.
Remove the system board.
7.
If it is necessary to replace the USB/power connector board cable, turn the system board upside
down with the expansion port 3 toward you.
Chapter 4 Removal and replacement procedures
8.
Disconnect the power connector cable (1) and the USB board cable (2) from the system board. The
USB/power connector board cable is included in the Cable Kit, spare part number 446519-001.
Reverse the above procedure to install the system board and USB/power connector board cable.
Component replacement procedures
85
Audio board
Description
Spare part number
For use in full-featured models (includes audio connectors, audio board cable, and infrared lens)
446523-001
For use in defeatured models (includes audio connectors, audio board cable, and infrared lens)
449967-001
Before removing the audio board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 51)
b.
Optical drive (see Optical drive on page 59)
c.
Switch cover (see Switch cover on page 61)
d.
Keyboard (see Keyboard on page 65)
e.
Speaker assembly (see Speaker assembly on page 63)
f.
Display assembly (see Display assembly on page 68)
g.
Top cover (see Top cover on page 74)
h.
System board (see System board on page 82)
Remove the audio board:
86
1.
Remove the two Phillips PM2.5×4.0 screws (1) that secure the audio board to the computer.
2.
Release the audio board (2) by sliding it back to disengage the audio connectors from the openings
in the base enclosure.
Chapter 4 Removal and replacement procedures
3.
Remove the audio board (3) by lifting it straight up.
Reverse this procedure to install the audio board.
Fan/heat sink assembly
NOTE:
All fan/heat sink assembly spare part kits include replacement thermal material.
Description
Spare part number
For use only in computer models with Intel processors:
●
Equipped with discrete graphics subsystem memory and 8.1 processors
450933-001
●
Equipped with discrete graphics subsystem memory and 7.9 processors
434986-001
●
Equipped with UMA graphics subsystem memory
446521-001
For use only in computer models with AMD processors:
●
Equipped with discrete graphics subsystem memory
449960-001
●
Equipped with UMA graphics subsystem memory
451860-001
NOTE: When replacing the fan/heat sink assembly, be sure that the power button board is removed
from the defective fan/heat sink assembly and installed on the replacement fan/heat sink assembly.
See Power button board on page 64 for power button board removal information.
NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the right side
and rear panel of the computer. The computer uses an electric fan for ventilation. The fan is controlled by
a temperature sensor and is designed to turn on automatically when high temperature conditions exist.
These conditions are affected by high external temperatures, system power consumption, power
management/battery conservation configurations, battery fast charging, and software applications.
Exhaust air is displaced through the ventilation grill located on the left side of the computer.
Component replacement procedures
87
Before removing the fan/heat sink assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 51)
b.
Optical drive (see Optical drive on page 59)
c.
Switch cover (see Switch cover on page 61)
d.
Keyboard (see Keyboard on page 65)
e.
Speaker assembly (see Speaker assembly on page 63)
f.
Display assembly (see Display assembly on page 68)
g.
Top cover (see Top cover on page 74)
h.
Audio board (see Audio board on page 86)
i.
USB/power connector board (see USB/power connector board on page 81)
j.
System board (see System board on page 82)
Remove the fan/heat sink assembly:
88
1.
Turn the system board upside down with the expansion port 3 and external monitor port toward you.
2.
Disconnect the fan cable (1) from the system board.
3.
Loosen the three Phillips PM2.5×5.0 screws (2) and the Phillips PM2.5×4.0 screw (3) that secure
the fan/heat sink assembly to the system board.
Chapter 4 Removal and replacement procedures
4.
Remove the fan/heat sink assembly (4).
NOTE: Due to the adhesive quality of the thermal paste and thermal pads located between the
fan/heat sink assembly and system board components, it may be necessary to move the fan/heat
sink assembly from side to side to detach the assembly.
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink
assembly (1) and (2), the processor (3), and the system board component (4) each time the fan/heat
sink assembly is removed. Thermal material must be installed on all surfaces before the fan/heat sink
assembly is reinstalled. Thermal material is included with all fan/heat sink assembly, system board, and
processor spare part kits.
Reverse this procedure to install the fan/heat sink assembly.
Processor
NOTE:
All processor spare part kits include thermal paste.
Description
Spare part number
Intel Core 2 Duo processors:
2.20-GHz processor (4-MB L2 cache, 800-MHz FSB)
453771-001
Component replacement procedures
89
Description
Spare part number
2.00-GHz processor (2-MB L2 cache, 800-MHz FSB)
455515-001
1.86-GHz processor (1-MB L2 cache, 533-MHz FSB)
453773-001
1.50-GHz processor (2-MB L2 cache, 667-MHz FSB)
453772-001
Intel Core Duo processors:
T7300 2.00-GHz processor (2-MB L2 cache)
446478-001
T7100 1.80-GHz processor (2-MB L2 cache)
446479-001
T5250 1.50-GHz processor (2-MB L2 cache)
453033-001
AMD processors:
Turion MK-38 (2.2-GHz, 512-MB L2 cache)
449904-001
Turion TL-66 (2.3 -GHz, 1-MB L2 cache)
450804-001
Turion TL-60 (2.0 -GHz, 1-MB L2 cache)
450803-001
Turion TL-58 (1.9 -GHz, 1-MB L2 cache)
450802-001
Turion TL-56 (1.8 -GHz, 1-MB L2 cache)
450801-001
Athlon TK-53 (1.7-GHz. 512-MB L2 cache)
451013-001
Processor bracket
For use with 7.9 processors
450370-001
For use with 8.1 processors
450371-001
Before removing the processor, follow these steps:
90
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 51)
b.
Optical drive (see Optical drive on page 59)
c.
Switch cover (see Switch cover on page 61)
d.
Keyboard (see Keyboard on page 65)
e.
Speaker assembly (see Speaker assembly on page 63)
f.
Display assembly (see Display assembly on page 68)
g.
Top cover (see Top cover on page 74)
Chapter 4 Removal and replacement procedures
h.
Audio board (see Audio board on page 86)
i.
USB/power connector board (see USB/power connector board on page 81)
j.
System board (see System board on page 82)
k.
Fan/heat sink assembly (see Fan/heat sink assembly on page 87)
Remove the processor:
1.
Turn the processor locking screw (1) one-half turn counterclockwise until you hear a click.
2.
Lift the processor (2) straight up and remove it.
NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossed
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Component replacement procedures
91
5
Setup Utility
Starting the Setup Utility
The Setup Utility is a ROM-based information and customization utility that can be used even when your
Windows® operating system is not working or will not load.
NOTE: The fingerprint reader (select models only) does not work when accessing the Setup Utility.
The utility reports information about the computer and provides settings for startup, security, and other
preferences.
To start the Setup Utility:
1.
Turn on or restart the computer.
2.
Before Windows opens and while “Press <F10> to enter setup” is displayed in the lower-left corner
of the screen, press f10.
Changing the language of the Setup Utility
The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1.
To start the Setup Utility, turn on or restart the computer, and then press f10 while “Press <F10> to
enter setup” is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select System Configuration > Language, and then press enter.
3.
Press f5 or f6 (or use the arrow keys) to select a language, and then press enter to select a language.
4.
When a confirmation prompt with your preference selected is displayed, press enter to save your
preference.
5.
To set your preferences and exit the Setup Utility, press f10 and then follow the instructions on the
screen.
Your preferences go into effect when the computer restarts in Windows.
92
Chapter 5 Setup Utility
Navigating and selecting in the Setup Utility
Because the Setup Utility is not Windows-based, it does not support the TouchPad. Navigation and
selection are by keystroke.
●
To choose a menu or a menu item, use the arrow keys.
●
To choose an item in a drop-down list or to toggle a field, for example an Enable/Disable field, use
either the arrow keys or f5 or f6.
●
To select an item, press enter.
●
To close a text box or return to the menu display, press esc.
●
To display additional navigation and selection information while the Setup Utility is open, press f1.
Displaying system information
The following procedure explains how to display system information in the Setup Utility. If the Setup Utility
is not open, begin at step 1. If the Setup Utility is open, begin at step 2.
1.
To start the Setup Utility, turn on or restart the computer, and then press f10 while “Press <F10>to
enter setup” is displayed in the lower-left corner of the screen.
2.
Access the system information by using the Main menu.
3.
To exit the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press enter. (The computer restarts in Windows.)
Restoring default settings in the Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is not
already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1.
To start the Setup Utility, turn on or restart the computer, and then press f10 while “Press <F10>to
enter setup” is displayed in the lower-left corner of the screen.
2.
Select Exit > Load Setup Defaults, and then press enter.
3.
When the Setup Confirmation is displayed, press enter to save your preferences.
4.
To set your preferences and exit the Setup Utility, press f10, and then follow the instructions on the
screen.
The Setup Utility default settings are set when you exit the Setup Utility and go into effect when the computer
restarts.
NOTE: Your password, security, and language settings are not changed when you restore the factory
default settings.
Navigating and selecting in the Setup Utility
93
Using advanced Setup Utility features
This chapter describes the Setup Utility features recommended for all users. For more information about
the Setup Utility features recommended for advanced users only, refer to Help and Support, which is
accessible only when the computer is in Windows.
The Setup Utility features available for advanced users include a hard drive self-test, a Network Service
Boot, and settings for boot order preferences.
The “<F12> to boot from LAN” message that is displayed in the lower-left corner of the screen each time
the computer is started or restarted in Windows is the prompt for a Network Service Boot.
The “Press <ESC> to change boot order” message that is displayed in the lower-left corner of the screen
each time the computer is started or restarted in Windows is the prompt to change the boot order.
Closing the Setup Utility
You can close the Setup Utility with or without saving changes.
●
To close the Setup Utility and save your changes from the current session, use either of the following
procedures:
◦
Press f10, and then follow the instructions on the screen.
—or—
◦
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the
arrow keys to select Exit > Exit Saving Changes, and then press enter.
When you use the f10 procedure, you are offered an option to return to the Setup Utility. When
you use the Exit Saving Changes procedure, the Setup Utility closes when you press enter.
●
To close the Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow
keys to select Exit > Exit Discarding Changes, and then press enter.
After the Setup Utility closes, the computer restarts in Windows.
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
NOTE: Some of the Setup Utility menu items listed in this section may not be supported by your computer.
Main menu
94
Select
To do this
System information
●
View and change the system time and date.
●
View identification information about the computer.
●
View specification information about the processor, memory
size, system BIOS, and keyboard controller version (select
models only).
Chapter 5 Setup Utility
Security menu
Select
To do this
Administrator password
Enter, change, or delete an administrator password.
Power-On Password
Enter, change, or delete a power-on password.
System Configuration menu
Select
To do this
Language Support
Change the Setup Utility language.
Enhanced SATA support (select models only)
Enable/disable enhanced SATA mode.
Boot Options
Set the following boot options:
●
f10 and f12 Delay (sec.)―Set the delay for the f10 and f12
functions of the Setup Utility in intervals of 5 seconds each (0, 5,
10, 15, 20).
●
CD-ROM boot―Enable/disable boot from CD-ROM.
●
Floppy boot―Enable/disable boot from Floppy.
●
Internal Network Adapter boot―Enable/disable boot from
Internal Network Adapter.
●
Boot Order―Set the boot order for:
◦
USB Floppy
◦
ATAPI CD/DVD ROM Drive
◦
Hard drive
◦
USB Diskette on Key
◦
USB Hard drive
◦
Network adapter
Button Sound (select models only)
Enable/disable the Quick Launch Button tapping sound.
Video memory up to (select models only)
Select the amount of video memory.
Diagnostics menu
Select
To do this
Hard Disk Self Test
Run a comprehensive self-test on the hard drive.
NOTE: On models equipped with two hard drives, this menu option
is called the Primary Hard Disk Self Test.
Secondary Hard Disk Self Test (select models only)
Run a comprehensive self-test on a secondary hard drive.
Setup Utility menus
95
6
Specifications
Computer specifications
Metric
U.S.
Height (front to back)
4.09 cm
1.61 in
Width
35.71 cm
14.06 in
Depth
25.71 cm
10.12 in
Weight (with optical drive, hard drive, and battery)
2.86 kg
6.31 lbs
Dimensions
Input power
Operating voltage
18.5 V dc —19.0 V dc
Operating current
3.5 A or 4.74 A
Temperature
Operating (not writing to optical disc)
0°C to 35°C
32°F to 95°F
Operating (writing to optical disc)
5°C to 35°C
41°F to 95°F
Nonoperating
-20°C to 60°C
-4°F to 140°F
Relative humidity
Operating
10% to 90%
Nonoperating
5% to 95%
Maximum altitude (unpressurized)
Operating (14.7 to 10.1 psia)
-15 m to 3,048 m
-50 ft to 10,000 ft
Nonoperating (14.7 to 4.4 psia)
-15 m to 12,192 m
-50 ft to 40,000 ft
Shock
Operating
125 g, 2 ms, half-sine
Nonoperating
200 g, 2 ms, half-sine
Random vibration
Operating
96
Chapter 6 Specifications
0.75 g zero-to-peak, 10 Hz to 500 Hz, 0.25 oct/min sweep rate
Metric
Nonoperating
U.S.
1.50 g zero-to-peak, 10 Hz to 500 Hz, 0.5 oct/min sweep rate
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within this
range of temperatures.
15.4-inch, WXGA, BrightView display specifications
Metric
U.S.
Height
20.7 cm
8.15 in
Width
33.1 cm
13.03 in
Diagonal
39.1 cm
15.39 in
Number of colors
Up to 16.8 million
Contrast ratio
200:1 (typical)
Brightness
150 nits (typical)
Dimensions
Pixel resolution
Pitch
0.259 × 0.259 mm
Format
1280 × 800
Configuration
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power consumption
4W
Viewing angle
+/-65° horizontal, +/-50° vertical (typical)
15.4-inch, WXGA, BrightView display specifications
97
Hard drive specifications
250-GB*
200-GB*
160-GB*
120-GB*
80-GB*
Height
9.5 mm
9.5 mm
9.5 mm
9.5 mm
9.5 mm
Width
70 mm
70 mm
70 mm
70 mm
70 mm
Weight
102 g
102 g
102 g
102 g
102 g
Interface type
SATA
SATA
SATA
SATA
SATA
Synchronous (maximum)
100 MB/sec
100 MB/sec
100 MB/sec
100 MB/sec
100 MB/sec
Security
ATA security
ATA security
ATA security
ATA security
ATA security
Dimensions
Transfer rate
Seek times (typical read, including setting)
Single track
3 ms
3 ms
3 ms
3 ms
3 ms
Average
13 ms
13 ms
13 ms
13 ms
13 ms
Maximum
24 ms
24 ms
24 ms
24 ms
24 ms
Logical blocks
488,379,125
390,706,000
312,560,480
234,433,260
156,280,320
Disk rotational speed
5400 rpm
4200 rpm
5400 rpm
5400 rpm
5400 rpm
Operating temperature
NOTE:
5°C to 55°C (41°F to 131°F)
Certain restrictions and exclusions apply. Consult technical support for details.
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Accessible capacity is less. Actual drive specifications
may differ slightly.
98
Chapter 6 Specifications
DVD±RW and CD-RW Super Multi Double-Layer
Combo Drive specifications
Applicable disc
Center hole diameter
Read:
Write:
CD-DA, CD+(E)G, CD-MIDI, CD-TEXT,
CD-ROM, CD-ROM XA, MIXED MODE
CD, CD-I, CD-I Bridge (Photo-CD, Video
CD), Multisession CD (Photo-CD, CDEXTRA, Portfolio, CD-R, CD-RW), CD-R,
CD-RW, DVD-ROM (DVD-5, DVD-9,
DVD-10, DVD-18), DVD-R, DVD-RW,
DVD+R, DVD+RW, DVD-RAM
CD-R and CD-RW
DVD+R, DVD+RW, DVD-R, DVD-RW,
DVD-RAM
1.5 cm (0.59 in)
Disc diameter
Standard disc
12 cm (4.72 in)
Mini disc
8 cm (3.15 in)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 μm
Access time
CD
DVD
Random
< 175 ms
< 230 ms
Full stroke
< 285 ms
< 335 ms
Audio output level
Audio-out, 0.7 Vrms
Cache buffer
2 MB
Data transfer rate
24X CD-ROM
3,600 KB/sec
8X DVD
10,800 KB/sec
24X CD-R
3,600 KB/sec
16X CD-RW
2,400 KB/sec
8X DVD+R
10,800 KB/sec
4X DVD+RW
5,400 KB/sec
8X DVD-R
10,800 KB/sec
4X DVD-RW
5,400 KB/sec
2.4X DVD+R(9)
2,700 KB/sec
5X DVD-RAM
6,750 KB/sec
Transfer mode
Multiword DMA Mode
Startup time
< 15 seconds
Stop time
< 6 seconds
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive specifications
99
System DMA specifications, Intel
Hardware DMA
System function
DMA0
Not applicable
DMA1*
Not applicable
DMA2*
Not applicable
DMA3
Not applicable
DMA4
Direct memory access controller
DMA5*
Available for PC Card
DMA6
Not assigned
DMA7
Not assigned
*PC Card controller can use DMA 1, 2, or 5.
100 Chapter 6 Specifications
System DMA specifications, AMD discrete and UMA
graphics
Hardware DMA
System function
DMA4
Direct memory access controller
System DMA specifications, AMD discrete and UMA graphics 101
System interrupt specifications, Intel
Hardware IRQ
System function
IRQ0
System timer
IRQ1
Standard 101-/102-Key or Microsoft® Natural Keyboard
IRQ2
Cascaded
IRQ3
Intel 82801DB/DBM USB2 Enhanced Host Controller—24CD
IRQ4
COM1
IRQ5*
Conexant AC—Link Audio Intel 82801DB/DBM SMBus Controller—24C3 Data Fax
Modem with SmartCP
IRQ6
Diskette drive
IRQ7*
Parallel port
IRQ8
System CMOS/real-time clock
IRQ9*
Microsoft ACPI-compliant system
IRQ10*
Intel USB UHCI controller—24C2
Intel 82852/82855 GM/GME Graphic Controller
Realtek RTL8139 Family PCI Fast Ethernet Controller
IRQ11
Intel USB EHCI controller—24CD
Intel USB UHCI controller—24C4
Intel USB UHCI controller—24C7
Intel Pro/Wireless 2200BG
TI OHCI 1394 host controller
TI PCI1410 CardBus controller
IRQ12
Synaptics PS/2 TouchPad
IRQ13
Numeric data processor
IRQ14
Primary IDE channel
IRQ15
Secondary IDE channel
*Default configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none.
NOTE: PC Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either the infrared or the serial port
may assert IRQ3 or IRQ4.
102 Chapter 6 Specifications
System interrupt specifications, AMD discrete
graphics
Hardware
IRQ System function
IRQ0
High precision event timer
IRQ1
Standard 101-/102-Key or Microsoft® Natural PS/2 Keyboard
IRQ5
RICOH OHCI Compliant IEEE 1394 Host Controller
IRQ7
Ricoh Memory Stick Controller
Ricoh SD/MMC Host Controller
Ricoh XD-Picture Card Controller
SDA Standard Compliant SD Host Controller
IRQ8
High precision event timer
IRQ10
nVidia nForce PCI System Management
IRQ11
nVidia nForce System Management Controller
IRQ12
Synaptics PS/2 Port TouchPad
IRQ13
Numeric data processor
IRQ14
ATA Channel 0
IRQ15
ATA Channel 1
IRQ16
Broadcom WLAN adapter
IRQ17
Standard Enhanced PCI to USB Host Controller
IRQ18
Standard OpenHCD USB Host Controller
IRQ19
nVidia GeForce8400M GS
IRQ20
nVidia nForce Networking Controller
IRQ21
HDA Controller
IRQ23
Standard Dual Channel PCI IDE Controller
System interrupt specifications, AMD discrete graphics 103
System interrupt specifications, AMD UMA graphics
Hardware
IRQ System function
IRQ0
High precision event timer
IRQ1
Standard 101-/102-Key or Microsoft® Natural PS/2 Keyboard
IRQ5
RICOH OHCI Compliant IEEE 1394 Host Controller
IRQ7
Ricoh Memory Stick Controller
Ricoh SD/MMC Host Controller
Ricoh XD-Picture Card Controller
SDA Standard Compliant SD Host Controller
IRQ8
High precision event timer
IRQ10
nVidia nForce PCI System Management
IRQ11
nVidia nForce System Management Controller
IRQ12
Synaptics PS/2 Port TouchPad
IRQ13
Numeric data processor
IRQ14
ATA Channel 0
IRQ15
ATA Channel 1
IRQ16
nVidia MCP67M
IRQ18
Standard OpenHCD USB Host Controller
Standard OpenHCD USB Host Controller
IRQ19
Broadcom WLAN adapter
IRQ21
HDA Controller
IRQ22
Standard Enhanced PCI to USB Host Controller
Standard Enhanced PCI to USB Host Controller
IRQ23
104 Chapter 6 Specifications
Standard Dual Channel PCI IDE Controller
System I/O address specifications, Intel
I/O address (hex)
System function (shipping configuration)
000 - 00F
DMA controller no. 1
010 - 01F
Unused
020 - 021
Interrupt controller no. 1
022 - 024
Opti chipset configuration registers
025 - 03F
Unused
02E - 02F
87334 “Super I/O” configuration for CPU
040 - 05F
Counter/timer registers
044 - 05F
Unused
060
Keyboard controller
061
Port B
062 - 063
Unused
064
Keyboard controller
065 - 06F
Unused
070 - 071
NMI enable/RTC
072 - 07F
Unused
080 - 08F
DMA page registers
090 - 091
Unused
092
Port A
093 - 09F
Unused
0A0 - 0A1
Interrupt controller no. 2
I/O Address (hex)
System Function (shipping configuration)
0A2 - 0BF
Unused
0C0 - 0DF
DMA controller no. 2
0E0 - 0EF
Unused
0F0 - 0F1
Coprocessor busy clear/reset
0F2 - 0FF
Unused
100 - 16F
Unused
170 - 177
Secondary fixed disk controller
178 - 1EF
Unused
1F0 - 1F7
Primary fixed disk controller
1F8 - 200
Unused
201
JoyStick (decoded in ESS1688)
202 - 21F
Unused
System I/O address specifications, Intel 105
I/O address (hex)
System function (shipping configuration)
220 - 22F
Entertainment audio
230 - 26D
Unused
26E - 26
Unused
278 - 27F
Unused
280 - 2AB
Unused
2A0 - 2A7
Unused
2A8 - 2E7
Unused
2E8 - 2EF
Reserved serial port
2F0 - 2F7
Unused
2F8 - 2FF
Infrared port
300 - 31F
Unused
320 - 36F
Unused
370 - 377
Secondary diskette drive controller
378 - 37F
Parallel port (LPT1/default)
380 - 387
Unused
388 - 38B
FM synthesizer—OPL3
38C - 3AF
Unused
3B0 - 3BB
VGA
3BC - 3BF
Reserved (parallel port/no EPP support)
3C0 - 3DF
VGA
3E0 - 3E1
PC Card controller in CPU
3E2 - 3E3
Unused
3E8 - 3EF
Internal modem
3F0 - 3F7
“A” diskette controller
3F8 - 3FF
Serial port (COM1/default)
CF8 - CFB
PCI configuration index register (PCIDIVO-1)
CFC - CFF
PCI configuration data register (PCIDIVO-1)
106 Chapter 6 Specifications
System I/O address specifications, AMD discrete and
UMA graphics
I/O address (hex)
System function (shipping configuration)
0000 - 0008
DMA controller
000A - 000F
DMA controller
0020 - 0021
Programmable interrupt controller
0040 - 0043
System timer
0060 - 0060
Standard 101-/102-Key or Microsoft® Natural PS/2 Keyboard
0061 - 0061
System speaker
0062 - 0062
Microsoft ACPI-Compliant Embedded Controller
0064 - 0064
Standard 101-/102-Key or Microsoft® Natural PS/2 Keyboard
0066 - 0066
Microsoft ACPI-Compliant Embedded Controller
0070 - 0071
System CMOS/real time clock
0081 - 0083
DMA controller
0087 - 0087
DMA controller
0089 - 008B
DMA controller
008F - 008F (UMA only)
DMA controller
00A0 - 00A1
Programmable interrupt controller
00C0 - 00D1
DMA controller
00D4 - 00DF
DMA controller
00F0 - 00F1
Numeric data processor
0170 - 0177
ATA Channel 1
01F0 - 01F7
ATA Channel 0
0376 - 0376
ATA Channel 1
03B0 - 03BB
nVidia GeForce8400M GS (discrete)
nVidia MCP67M (UMA)
03B0 - 03BB (discrete only)
PCI standard PCI-to-PCI bridge
03C0 - 03DF
nVidia GeForce8400M GS (discrete)
nVidia MCP67M (UMA)
03C0 - 03DF (discrete only)
PCI standard PCI-to-PCI bridge
03F6 - 03F6
ATA Channel 0
3000 - 303F
nVidia nForce PCI System Management
3040 - 307F
nVidia nForce PCI System Management
3080 - 30BF
nVidia nForce PCI System Management
30C0 - 30CF
Standard Dual Channel PCI IDE Controller
System I/O address specifications, AMD discrete and UMA graphics 107
I/O address (hex)
System function (shipping configuration)
30D0 - 30DF
Standard Dual Channel PCI IDE Controller
30E0 - 30E3 (UMA only)
Standard Dual Channel PCI IDE Controller
30E8 - 30EB
Standard Dual Channel PCI IDE Controller
30EC - 30EF
Standard Dual Channel PCI IDE Controller
30F0 - 30F7
Standard Dual Channel PCI IDE Controller
30F8 - 30FF (discrete only)
Standard Dual Channel PCI IDE Controller
4000 - 407F (discrete only)
nVidia GeForce8400M GS
4000 - 4FFF
PCI standard PCI-to-PCI bridge
5000 - 5FFF (discrete only)
PCI standard PCI-to-PCI bridge
108 Chapter 6 Specifications
System memory map specifications, Intel
Size
Memory address
System function
640 KB
00000000-0009FFFF
Base memory
128 KB
000A0000-000BFFFF
Video memory
48 KB
000C0000-000CBFFF
Video BIOS
160 KB
000C8000-000E7FFF
Unused
64 KB
000E8000-000FFFFF
System BIOS
15 MB
00100000-00FFFFFF
Extended memory
58 MB
04800000-07FFFFFF
Super extended memory
58 MB
04800000-07FFFFFF
Unused
2 MB
08000000-080FFFFF
Video memory (direct access)
4 GB
08200000-FFFEFFFF
Unused
64 KB
FFFF0000-FFFFFFFF
System BIOS
System memory map specifications, Intel 109
System memory map specifications, AMD discrete
graphics
Size
Memory address
System function
128 KB
000A0000-000BFFFF
nVidia GeForce8400M GS
16 KB
B0000000-B0003FFF
HDA Controller
8 KB
B0004000-B0005FFF
Standard Dual Channel PCI IDE
Controller
4 KB
B0006000-B0006FFF
Standard OpenHCD USB Host Controller
256 B
B0007000-B00070FF
Standard Enhanced PCI to USB Host
Controller
4 KB
B0008000-B0008FFF
nVidia nForce Networking Controller
512 KB
B0080000-B00FFFFF
nVidia nForce System Management
Controller
2 KB
B0100000-B01007FF
RICOH OHCI Compliant IEEE 1394 Host
Controller
256 B
B0100800-B01008FF
SDA Standard Compliant SD Host
Controller
256 B
B0100C00-B0100CFF
Ricoh SD/MMC Host Controller
256 B
B0101000-B01010FF
Ricoh Memory Stick Controller
256 B
B0101400-B01014FF
Ricoh XD-Picture Card Controller
16 KB
B0200000-B0203FFF
Broadcom WLAN adapter
16 MB
B1000000-B1FFFFFF
nVidia GeForce8400M GS
32 MB
B2000000-B3FFFFFF
nVidia GeForce8400M GS
1 MB
B6000000-B60FFFFF
Broadcom WLAN adapter
256 MB
C0000000-CFFFFFFF
nVidia GeForce8400M GS
1 KB
FED00000-FED003FF
High precision event timer
110 Chapter 6 Specifications
System memory map specifications, AMD UMA
graphics
Size
Memory address
System function
128 KB
000A0000-000BFFFF
nVidia MCP67M
16 KB
B0000000-B0003FFF
HDA Controller
8 KB
B0004000-B0005FFF
Standard Dual Channel PCI IDE
Controller
4 KB
B0006000-B0006FFF
Standard OpenHCD USB Host Controller
256 B
B0007000-B00070FF
Standard Enhanced PCI to USB Host
Controller
256 B
B0007400-B00074FF
Standard Enhanced PCI to USB Host
Controller
16 B
B0007800-B000780F
nVidia nForce Networking Controller
256 B
B0007C00-B0007CFF
nVidia nForce Networking Controller
4 KB
B0008000-B0008FFF
Standard OpenHCD USB Host Controller
4 KB
B0009000-B0009FFF
nVidia nForce Networking Controller
512 KB
B0080000-B00FFFFF
nVidia nForce System Management
Controller
16 MB
B1000000-B1FFFFFF
nVidia MCP67M
16 MB
B2000000-B2FFFFFF
nVidia MCP67M
2 KB
B3000000-B30007FF
RICOH OHCI Compliant IEEE 1394 Host
Controller
256 B
B3000800-B30008FF
SDA Standard Compliant SD Host
Controller
256 B
B3000C00-B3000CFF
Ricoh SD/MMC Host Controller
256 B
B3001000-B30010FF
Ricoh Memory Stick Controller
256 B
B3001400-B30014FF
Ricoh XD-Picture Card Controller
16 KB
B6000000-B6003FFF
Broadcom WLAN adapter
256 KB
C0000000-CFFFFFFF
nVidia MCP67M
1 KB
FED00000-FED003FF
High precision event timer
System memory map specifications, AMD UMA graphics 111
7
Screw listing
This section provides specification and reference information for the screws and standoffs used in the
computer. All screws and standoffs listed in this section are available in the Screw Kit, spare part number
434747-001, and the Display Screw Kit, spare part number 431399-001.
112 Chapter 7 Screw listing
Phillips PM2.0×5.0 captive screw
Color
Quantity
Length
Thread
Head width
Black
4
5.0 mm
2.0 mm
5.0 mm
Where used:
(1) Two screws (secured by C-clips) that secure the hard drive cover to the computer
(2) Two screws (secured by C-clips) that secure the memory/WLAN module compartment cover to the
computer
Phillips PM2.0×5.0 captive screw 113
Phillips PM3.0×4.0 screw
Color
Quantity
Length
Thread
Head width
Silver
4
4.0 mm
3.0 mm
5.0 mm
Where used: 4 screws that secure the hard drive bracket to the hard drive
114 Chapter 7 Screw listing
Phillips PM2.0×3.0 screw
Color
Quantity
Length
Thread
Head width
Silver
11
3.0 mm
2.0 mm
4.5 mm
Where used: 2 screws that secure the WLAN module to the system board
Where used: 2 screws that secure the optical drive bracket to the optical drive
Phillips PM2.0×3.0 screw 115
Where used: One screw that secures the power button board to the fan/heat sink assembly
Where used: 4 screws that secure the display hinges to the display panel
Where used: 2 screws that secure the wireless antenna transceivers to the display enclosure
116 Chapter 7 Screw listing
Phillips PM2.5×7.0 screw
Color
Quantity
Length
Thread
Head width
Black
23
7.0 mm
2.5 mm
5.0 mm
Where used:
(1) One screw that secures the optical drive to the computer
(2) Four screws that secure the keyboard to the computer
(3) Two screws that secure the display assembly to the computer
Phillips PM2.5×7.0 screw 117
Where used: 2 screws that secure the display assembly to the computer
Where used: 9 screws that secure the top cover to the computer
Where used: 3 screws that secure the top cover trim to the computer
118 Chapter 7 Screw listing
Where used: 2 screws that secure the top cover to the computer
Phillips PM2.5×7.0 screw 119
Phillips PM2.5×5.0 screw
Color
Quantity
Length
Thread
Head width
Black
11
5.0 mm
2.5 mm
5.0 mm
Where used: 3 screws that secure the switch cover to the computer
120 Chapter 7 Screw listing
Where used: 6 screws that secure the display bezel to the display assembly
Where used: One screw that secures the top cover to the computer
Where used: One screw that secures the top cover to the computer
Phillips PM2.5×5.0 screw 121
Phillips PM2.5×2.0 screw
Color
Quantity
Length
Thread
Head width
Silver
5
2.0 mm
2.5 mm
7.0 mm
Where used: 2 screws that secure the speaker assembly to the computer
Where used: 3 screws that secure the top cover to the computer
122 Chapter 7 Screw listing
Phillips PM2.5×4.0 screw
Color
Quantity
Length
Thread
Head width
Silver
18
4.0 mm
2.5 mm
5.0 mm
Where used: 6 screws that secure the display panel to the display assembly
Where used: 2 screws that secure the top cover to the computer
Phillips PM2.5×4.0 screw 123
Where used:
(1) Four screws that secure the ExpressCard assembly to the computer
(2) Two screws that secure the USB/power connector board to the computer
(3) Two screws that secure the system board to the computer
Where used: 2 screws that secure the audio board to the computer
124 Chapter 7 Screw listing
Hex HM5.0×9.0 standoff
Color
Quantity
Length
Thread
Head width
Silver
2
9.0 mm
2.5 mm
5.0 mm
Where used: 2 standoffs that secure the top cover to the computer
Hex HM5.0×9.0 standoff 125
Phillips PM2.0×2.0 screw
Color
Quantity
Length
Thread
Head width
Silver
2
2.0 mm
2.0 mm
4.0 mm
Where used: 2 screws that secure the Bluetooth module to the system board
126 Chapter 7 Screw listing
Phillips PM2.5×5.0 captive screw
Color
Quantity
Length
Thread
Head width
Black
3
5.0 mm
2.5 mm
5.0 mm
Where used: 3 screws that secure the fan/heat sink to the computer
Phillips PM2.5×5.0 captive screw 127
Phillips 2.5×4.0 captive screw
Color
Quantity
Length
Thread
Head width
Silver
1
4.0 mm
2.5 mm
5.0 mm
Where used: One captive screw (secured by a C-clip) that secures the fan/heat sink assembly to the
system board
128 Chapter 7 Screw listing
8
Backup and Recovery
Recovering system information
Tools provided by the operating system and Recovery Manager software are designed to help you with
the following tasks for safeguarding your information and restoring it in case of a system failure:
●
Back up your information regularly to protect your important system files.
●
Make a set of recovery discs (Recovery Manager software feature). Recovery discs are used to start
up (boot) your computer and restore the operating system and software programs to factory settings
in case of system failure or instability.
●
Create system restore points (operating system feature). System restore points allow you to reverse
undesirable changes to your computer by restoring the computer to an earlier state.
●
Recover a program or driver (Recovery Manager software feature). This feature helps you reinstall
a program or driver without performing a full system recovery.
●
Perform a full system recovery (Recovery Manager software feature). With Recovery Manager, you
can recover your full factory image if you experience system failure or instability. Recovery Manager
works from a dedicated recovery partition on the hard drive or from recovery discs you create.
Backing up your information
When to back up
●
On a regularly scheduled basis.
NOTE: Set reminders to back up your information periodically.
●
Before the computer is repaired or restored.
●
Before you add or modify hardware or software.
Recovering system information 129
Back up suggestions
●
Create system restore points using the Windows System Restore feature.
●
Store personal files in the Documents folder and back up these folders periodically.
●
Back up templates stored in their associated programs.
●
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings.
The screen shot can be a time saver if you have to reset your preferences.
To copy the screen and paste it into a word-processing document:
a.
Display the screen.
b.
Copy the screen:
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
c.
Open a word-processing document, and then select Edit > Paste.
Using system restore points
When you back up your system, you are creating a system restore point. A system restore point allows
you to save and name a snapshot of your hard drive at a specific point in time. You can then recover
back to that point if you want to reverse subsequent changes made to your system.
NOTE: Recovering to an earlier restore point does not affect data files saved or e-mails created since
the last restore point.
You also can create additional restore points to provide increased protection for your system files and
settings.
When to create restore points
●
Before you add or extensively modify software or hardware.
●
Periodically, whenever the system is performing optimally.
NOTE: If you revert to a restore point and then change your mind, you can reverse the restoration.
Create a system restore point
1.
Select Start > Control Panel > System and Maintenance > System.
2.
In the left pane, click System protection.
3.
Click the System Protection tab.
4.
Under Automatic restore points, select the disk for which you want to create a restore point.
5.
Click Create.
The System Protection window opens.
6.
Follow the on-screen instructions.
130 Chapter 8 Backup and Recovery
Restore to a previous date and time
To revert to a restore point (created at a previous date and time), when the computer was functioning
optimally, follow these steps:
1.
Select Start > Control Panel > System and Maintenance > System.
2.
In the left pane, click System protection.
3.
Click the System Protection tab.
4.
Click the System Restore button, and then click Next.
The System Restore window opens.
5.
Follow the on-screen instructions.
Creating recovery discs
Recovery Manager creates a set of recovery CDs or DVDs for the computer. Use recovery discs to restore
the operating system and software programs to factory settings, in case of system failure or instability.
NOTE: Handle these discs carefully and keep them in a safe place. The software allows the creation of
only one set of recovery discs.
Note the following guidelines before creating recovery discs:
●
You will need high quality CD-R, DVD-R, or DVD+R discs (purchased separately).
NOTE: Formatted DVD±RW discs and DVD±RW double-layer discs are not compatible with the
Recovery Manager software.
●
The computer must be connected to AC power during this process.
●
Only one set of recovery discs can be created per computer.
●
Number each disc before inserting it into the computer optical drive.
●
If necessary, you can exit the program before you have finished creating the recovery discs. The next
time you open Recovery Manager, you will be prompted to continue the disc creation process.
To create a set of recovery discs:
1.
Select Start > All Programs > Recovery Manager > Recovery Manager.
Recovery Manager opens.
2.
Click Advanced Options.
NOTE: If you are operating the computer on battery power, you will be prompted to connect to
AC power before you can go to the next step.
3.
Click Recovery disc creation, and then click Next.
4.
Follow the on-screen instructions.
Recovering system information 131
Reinstalling software programs and drivers
If a program or driver preinstalled at the factory is accidentally erased or is damaged, Recovery Manager
allows you to reinstall it.
NOTE: Software not provided with this computer must be reinstalled from the disc provided by the
manufacturer or downloaded from the manufacturer's Web site.
NOTE: Before reinstalling the program, be sure it is fully uninstalled.
Recovery Manager replaces corrupted system files and reinstalls deleted system files within the program.
●
In most cases, if the program you are reinstalling is still on your computer, the reinstallation process
does not affect your personal settings.
●
In all cases, if a program has been deleted from your computer, the reinstallation process reinstalls
the program or utility to the factory image but cannot restore your personal settings.
Reinstalling preinstalled programs and drivers
1.
Remove the program or driver:
NOTE: In some cases, drivers are not listed in the Programs and Features list. If the driver is not
listed, it does not need to be removed.
2.
a.
Select Start > Control Panel > Programs > Uninstall a program.
b.
Right-click the program or driver you want to remove, and then click Uninstall.
Reinstall the program or driver:
a.
Select Start > All Programs > Recovery Manager > Recovery Manager.
Recovery Manager opens.
b.
Click Advanced Options.
c.
Click either Software program re-installation or Hardware driver re-installation,
and then click Next.
d.
Follow the on-screen instructions.
e.
Restart the computer if prompted.
Reinstalling programs from discs
1.
Insert the disc into the optical drive.
2.
When the installation wizard opens, follow the installation instructions on the screen.
3.
Restart the computer if prompted.
132 Chapter 8 Backup and Recovery
Performing a recovery
Recovery Manager software allows you to repair or restore the system if you experience system failure or
instability. Recovery Manager works from recovery discs that you create or from a dedicated recovery
partition on the hard drive.
NOTE: Windows has its own built-in repair features, such as System Restore and driver rollback
capabilities. If you have not already tried these features, try them before using Recovery Manager.
NOTE: Recovery Manager only recovers software that was preinstalled at the factory. Software not
provided with this computer must be reinstalled from the disc provided by the manufacturer or downloaded
from the manufacturer's Web site.
Recovering from the recovery discs
To restore the system from the recovery discs:
1.
Back up all personal files.
2.
Insert the first recovery disc into the optical drive and restart the computer.
3.
Follow the on-screen instructions.
Recovering from the partition on the hard drive
You can perform a recovery from the partition on the hard drive from either the Start button or f11.
To restore the system from the partition, follow these steps:
1.
Access Recovery Manager in either of the following ways:
●
Select Start > All Programs > Recovery Manager > Recovery Manager.
●
Restart the computer and press f11 while the “Press <F11> for recovery” message is displayed
on the screen. Then select Recovery Manager.
Recovery Manager opens.
2.
Click Advanced Options.
3.
Click System recovery, and then click Next.
4.
Follow the on-screen instructions.
Recovering system information 133
Deleting the recovery partition on the hard drive
The Recovery Manager Advanced Options menu provides the option of deleting the recovery partition,
which will increase space on the hard drive. Delete the recovery partition only if you have already created
recovery discs.
CAUTION: After you create the recovery discs, you can increase space on the hard drive by deleting
the recovery partition. However, doing this is not recommended. If you delete this partition, you will lose
any information that is on the partition, including Recovery Manager software. Thereafter, you must use
the recovery discs to access Recovery Manager software.
To delete the recovery partition:
1.
If you have not already created recovery discs, create them now.
2.
Select Start > All Programs > Recovery Manager > Recovery Manager.
Recovery Manager opens.
3.
Click Advanced Options.
4.
Click Remove recovery partition, and then click Next.
5.
Follow the on-screen instructions.
Updating reinstalled software
After you perform a system recovery, connect to the Internet to update all reinstalled software.
To access update links for the operating system and other software provided on your computer:
▲
Select Start > Help and Support.
To update optional software, follow the instructions provided by the software manufacturer. Some
programs include an update feature you can access from a Help button or menu within the program.
134 Chapter 8 Backup and Recovery
9
Connector pin assignments
Audio-in (microphone)
Pin
Signal
1
Audio signal in
2
Audio signal in
3
Ground
Audio-out (headphone)
Pin
Signal
1
Audio out, left channel
2
Audio out, right channel
3
Ground
Audio-in (microphone) 135
External monitor
Pin
Signal
1
Red analog
2
Green analog
3
Blue analog
4
Not connected
5
Ground
6
Ground analog
7
Ground analog
8
Ground analog
9
+5 VDC
10
Ground
11
Monitor detect
12
DDC 2B data
13
Horizontal sync
14
Vertical sync
15
DDC 2B clock
136 Chapter 9 Connector pin assignments
RJ-11 (modem)
Pin
Signal
1
Unused
2
Tip
3
Ring
4
Unused
5
Unused
6
Unused
RJ-45 (network)
Pin
Signal
1
Transmit +
2
Transmit -
3
Receive +
4
Unused
5
Unused
6
Receive -
7
Unused
8
Unused
RJ-11 (modem) 137
S-Video-out
Pin
Signal
1
S-VHS color (C) signal
2
Composite video signal
3
S-VHS intensity (Y) signal
4
S-VHS color ground
5
TV-CD
6
S-VHS intensity ground
7
Composite video ground
Universal Serial Bus
Pin
Signal
1
+5 VDC
2
Data -
3
Data +
4
Ground
138 Chapter 9 Connector pin assignments
10 Power cord set requirements
The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120
volts AC or from 220 to 240 volts AC.
The 3-conductor power cord set included with the computer meets the requirements for use in the country
or region where the equipment is purchased.
Power cord sets for use in other countries or regions must meet the requirements of the country or region
where the computer is used.
Requirements for all countries or regions
The requirements listed below are applicable to all countries or regions:
●
The length of the power cord set must be at least 1.5 m (5.0 ft) and no more than 2.0 m (6.5 ft).
●
All power cord sets must be approved by an acceptable accredited agency responsible for evaluation
in the country or region where the power cord set will be used.
●
The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage rating
of 125 or 250 V AC, as required by each country or region’s power system.
●
The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard
Sheet C13 connector for mating with the appliance inlet on the back of the computer.
Requirements for all countries or regions 139
Requirements for specific countries or regions
Country/region
Accredited agency
Applicable note number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
South Korea
EK
4
The Netherlands
KEMA
1
Norway
NEMKO
1
The People's Republic of China
CCC
5
Sweden
SEMKO
1
Switzerland
SEV
1
Taiwan
BSMI
4
The United Kingdom
BSI
1
The United States
UL
2
1.
The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
2.
The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole grounding
type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3.
The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00-mm² conductor size. The wall plug
must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
4.
The flexible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler and
wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be
used.
5.
The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler and
wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be
used.
140 Chapter 10 Power cord set requirements
11 Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general household
waste. Follow the local laws and regulations in your area for computer battery disposal.
Display
WARNING! The backlight contains mercury. Caution must be exercised when removing and handling
the backlight to avoid damaging this component and causing exposure to the mercury.
CAUTION: The procedures in this appendix can result in damage to display components. The only
components intended for recycling purposes are the liquid crystal display (LCD) panel and the backlight.
Careful handling must be exercised when removing these components.
NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly
that might require special handling at end-of-life. Disposal of mercury may be regulated because of
environmental considerations. For disposal or recycling information, contact your local authorities, or see
the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org.
This section provides disassembly instructions for the display assembly. The display assembly must be
disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2).
NOTE: The procedures provided in this appendix are general disassembly instructions. Specific details,
such as screw sizes, quantities, and locations, and component shapes and sizes, can vary from one
computer model to another.
Battery 141
Perform the following steps to disassemble the display assembly:
1.
Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly.
2.
Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the
display bezel until the bezel disengages from the display assembly.
3.
Remove the display bezel (3).
142 Chapter 11 Recycling
4.
Disconnect all display panel cables (1) from the display inverter and remove the inverter (2).
5.
Remove all screws (1) that secure the display panel assembly to the display enclosure.
6.
Remove the display panel assembly (2) from the display enclosure.
7.
Turn the display panel assembly upside down.
8.
Remove all screws that secure the display panel frame to the display panel.
9.
Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the display
panel frame.
Display 143
10. Remove the display panel frame (2) from the display panel.
11. Remove the screws (1) that secure the backlight cover to the display panel.
12. Lift the top edge of the backlight cover (2) and swing it outward.
13. Remove the backlight cover.
14. Turn the display panel right-side up.
144 Chapter 11 Recycling
15. Remove the backlight cables (1) from the clip (2) in the display panel.
16. Turn the display panel upside down.
17. Remove the backlight frame from the display panel.
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and causing exposure to the mercury.
Display 145
18. Remove the backlight from the backlight frame.
19. Disconnect the display cable (1) from the LCD panel.
20. Remove the screws (2) that secure the LCD panel to the display rear panel.
21. Release the LCD panel (3) from the display rear panel.
22. Release the tape (4) that secures the LCD panel to the display rear panel.
23. Remove the LCD panel.
24. Recycle the LCD panel and backlight.
146 Chapter 11 Recycling
Index
Symbols/Numerics
1394 port, location 14
A
AC adapter, spare part
numbers 30, 32, 38
administrator password 95
advanced Setup Utility
features 94
antenna
removal 72
spare part numbers 26, 32,
36, 72
applications key, Windows 9
audio board
removal 86
spare part number 22, 36,
86
audio board cable, illustrated 28
audio, product description 4
audio-in jack
location 13
pin assignments 135
audio-out jack
location 13
pin assignments 135
audio-out S/PDIF jack,
location 13
B
backpack, spare part
number 30, 32
backup 129
base enclosure, spare part
numbers 22, 35, 36, 38
battery
removal 46
spare part numbers 22, 35,
37, 46
battery bay 16
battery light 8, 13
battery release latch 16
bezel
illustrated 25
spare part numbers 25, 71
Bluetooth module
removal 78
spare part number 22, 32,
78
Bluetooth module cable,
illustrated 28
boot options 95
boot order 95
bottom components 16
button sound 95
buttons
DVD 10
media 10
next/fast forward 11
play/pause 11
power 10
previous/rewind 10
stop 11
volume mute 11
C
Cable Kit
contents 28
spare part number 25, 28,
36
cables, service considerations 40
camera
location 7
product description 3
camera cable
removal 73
spare part number 73
camera light 7
camera module
illustrated 25
removal 47
spare part number 25, 35,
47
caps lock light 8
carrying case, spare part
number 30, 32
changing the Setup Utility
language 92
chipset, product description 1
closing the Setup Utility 94
CMOS clearing 44
components
bottom 16
display 7
front 13
keyboard 9
left-side 14
lights 8
rear 15
right-side 15
top 8
TouchPad 12
composite video cable, spare part
number 30, 32
computer feet
locations 53
spare part number 22, 53
computer specifications 96
connector pin assignments
audio-in 135
audio-out 135
external monitor 136
headphone 135
microphone 135
modem 137
monitor 136
network 137
RJ-11 137
RJ-45 137
Index 147
S-Video-out 138
Universal Serial Bus (USB) 138
connectors, service
considerations 40
D
Diagnostics menu 95
Digital Media Slot 14
Digital Media Slot light 14
diskette drive
precautions 40
product description 3
display assembly
removal 68
spare part numbers 18, 35,
68
display bezel
illustrated 25
release 47, 49
spare part numbers 25, 32,
33, 35, 71
Display Cable Kit, spare part
number 26, 32
display components
illustrated 25
recycling 141
spare part numbers 25
display enclosure
illustrated 25
spare part numbers 26, 33,
35
display hinge
removal 71
spare part number 72
display hinge cover
removal 71
spare part number 71
Display Hinge Cover Kit, spare part
number 32
Display Hinge Kit, spare part
number 25, 32
display inverter
illustrated 25
removal 49, 50
spare part number 25, 32,
49
Display Label Kit, spare part
number 26, 36
display panel
illustrated 25
148 Index
product description 3
removal 71
spare part number 25, 71
spare part numbers 35, 38
Display Screw Kit, spare part
number 26, 32
display specifications 97
display switch 7
docking support, product
description 5
drive light 8, 13
drivers, reinstalling 132
drives
boot order 95
preventing damage 40
DVB-T antenna adapter, spare part
number 30, 32
DVB-T tuner, spare part
number 30, 32
DVD button 10
DVD/CD-RW Combo Drive
precautions 40
removal 59
spare part number 24, 29,
35, 59
specifications 99
DVD±RW and CD-RW Combo Drive
precautions 40
removal 59
spare part numbers 24, 29,
35, 36, 59
specifications 99
DVD±RW and DVD-ROM Super
Multi Drive with LightScribe
spare part number 59
E
electrostatic discharge 41
enhanced SATA support 95
esc key 9
Ethernet, product description 4
expansion port 3 14
ExpressCard assembly
removal 79
spare part number 21, 32,
79
ExpressCard Kit, spare part
number 30, 35
ExpressCard slot 15
ExpressCard slot bezel
illustrated 27
removal 80
external media cards, product
description 4
external monitor port
location 14
pin assignments 136
F
fan/heat sink assembly
removal 87
spare part numbers 21, 33,
36, 37, 87
feet
locations 53
spare part number 22, 53
fingerprint reader 11, 92
fingerprint reader board, spare part
number 20, 35, 36, 74
fn key 9
front components 13
function keys 9
G
graphics, product description 2
grounding equipment and
methods 43
H
hard drive
precautions 40
product description 3
removal 51
spare part numbers 22, 29,
35, 37, 38, 51
specifications 98
hard drive bay 16
hard drive cover
illustrated 27
removal 51
hard drive self test 95
HD-ROM Combo Drive
spare part number 25, 29,
36, 59
HD-ROM Drive
removal 59
spare part number 24, 29,
35, 59
HDMI port 14
headphone jack
location 13
pin assignments 135
headset, spare part number 30,
31
hinge
removal 71
spare part number 25, 32,
72
hinge cover
removal 71
spare part number 26, 71
I
I/O address specifications 105,
107
infrared emitter, spare part
number 30, 33
infrared lens 13
interrupt specifications 102,
103, 104
inverter
illustrated 25
removal 49, 50
spare part number 25, 32,
49
J
jacks
audio-in 13
audio-out 13
audio-out S/PDIF 13
headphone 13
microphone 13
modem 14
network 14
RJ-11 14
RJ-45 14
S-Video-out jack 14
K
keyboard
product description 5
removal 65
spare part numbers 19, 34,
37, 65
keyboard components 9
keypad keys 9
keys
embedded numeric keypad 9
esc 9
fn 9
function 9
Windows applications
Windows logo 9
9
L
language support 92, 95
LED board cable, illustrated 28
left-side components 14
light components 8
lights
battery 8, 13
caps lock 8
drive 8, 13
num lock 8
optical drive 15
power 8, 13
volume down 8
volume mute 8
volume up 8
wireless 13
M
main menu 94
mass storage devices, spare part
numbers 29
media button 10
memory map specifications, AMD
discrete 110
memory map specifications, AMD
UMA 111
memory map specifications,
Intel 109
memory module
product description 3
removal 53
spare part numbers 24, 35,
38, 53
memory/WLAN module
compartment 16
memory/WLAN module
compartment cover
illustrated 27
removal 54
microphone
location 7
product description 4
removal 72
spare part number 26, 32,
73
microphone jack
location 13
pin assignments 135
model name 1
modem jack
location 14
pin assignments 137
modem module
product description 4
monitor port
location 14
pin assignments 136
mouse, spare part numbers 30,
32, 33
N
navigating in the Setup Utility 93
network jack
location 14
pin assignments 137
next/fast forward button 11
num lock light 8
O
operating system, product
description 5
optical drive
location 15
precautions 40
product description 3
removal 59
spare part numbers 24, 29,
59
specifications 99
optical drive light 15
P
packing guidelines 42
password clearing 44
passwords 95
plastic parts 39
Plastics Kit
contents 27
spare part number 21, 27,
33
play/pause button 11
pointing device
components 12
product description 5
ports
1394 14
Index 149
external monitor port 14
HDMI 14
monitor port 14
product description 4
Universal Serial Bus (USB) 14,
15
power button 10
power button board
removal 64
spare part number 19, 32,
64
power button board cable,
illustrated 28
power connector 15
power cord
set requirements 139
spare part numbers 30
power cord, spare part
numbers 31
power light 8, 13
power requirements, product
description 5
power-on password 95
previous/rewind button 10
processor
product description 1
removal 89
spare part numbers 21, 35,
36, 37, 38, 89
processor bracket
spare part number 22
processor bracket, spare part
number 36, 90
product description
audio 4
camera 3
chipset 1
diskette drive 3
display panel 3
docking support 5
Ethernet 4
external media cards 4
graphics 2
hard drives 3
keyboard 5
memory module 3
microphone 4
modem module 4
operating system 5
optical drives 3
150 Index
pointing devices 5
ports 4
power requirements 5
processors 1
product name 1
security 5
serviceability 5
wireless 4
product name 1
R
rear component 15
recovery discs 131
recovery partition, deleting 134
recovery, system 133
remote control, spare part
numbers 30, 33
removal/replacement
preliminaries 39
procedures 45
restore points 130
RF input adapter cable, spare part
number 30, 32
right-side components 15
RJ-11 jack
location 14
pin assignments 137
RJ-45 jack
location 14
pin assignments 137
RTC battery
removal 55
spare part number 24, 35,
55
spare part numbers 36
Rubber Kit, spare part
number 22, 32, 53
S
S-Video-out jack
location 14
pin assignments 138
Screw Kit
contents 112
spare part number 31, 32
screw listing 112
secondary hard drive self test 95
security cable slot 14
Security menu 95
security, product description 5
selecting in the Setup Utility 93
serial number 17, 45
service considerations 39
serviceability, product
description 5
Setup Utility
changing the language 92
Diagnostics menu 95
displaying system
information 93
Main menu 94
navigating 93
overview 92
Security menu 95
selecting 93
starting 92
System Configuration menu 95
using advanced features 94
software
reinstalling 132
updating 134
speaker assembly
removal 63
spare part number 20, 32,
63
speakers 10
specifications
computer 96
display 97
DVD/CD-RW Combo Drive 99
DVD±RW and CD-RW Combo
Drive 99
hard drive 98
I/O addresses, AMD 107
I/O addresses, Intel 105
interrupts, AMD discrete 103
interrupts, AMD UMA 104
interrupts, Intel 102
memory map, AMD
discrete 110
memory map, AMD UMA 111
memory map, Intel 109
optical drive 99
system DMA, AMD 101
system DMA, Intel 100
static-shielding materials 43
stop button 11
switch cover
removal 61
spare part number 19, 35,
61
system board
removal 82
spare part numbers 22, 35,
36, 38, 82
System Configuration menu 95
system DMA 100, 101
system information 93, 94
system memory map, AMD
discrete 110
system memory map, AMD
UMA 111
system memory map, Intel 109
T
thermal material, replacement 89
tools required 39
top components 8
top cover
removal 74
spare part numbers 20, 35,
36, 37, 74
top cover trim
removal 77
spare part number 21, 32,
77
TouchPad 12
TouchPad buttons 12
TouchPad light 12
TouchPad on/off button 12
TouchPad scroll zone 12
transporting guidelines 42
TV tuner antenna, spare part
number 30, 33
TV tuner, spare part number 30,
33
spare part number 81
spare part numbers 22, 36
USB/power connector board cable
illustrated 28
removal 84
V
vents 15, 16
video memory 95
volume down light 8
volume mute button 11
volume mute light 8
volume scroll zone 11
volume up light 8
W
Windows applications key 9
Windows logo key 9
wireless antenna
removal 72
spare part numbers 26, 32,
36, 72
Wireless Antenna Kit, spare part
numbers 26, 32, 36, 72
wireless light 13
wireless switch 13
wireless, product description 4
WLAN module
removal 56
spare part numbers 23, 32,
33, 37, 56
workstation guidelines 42
U
Universal Serial Bus (USB) port
locations 14, 15
pin assignments 138
unknown password 44
USB digital drive, spare part
number 30, 31
USB/power connector board
removal 81
Index 151
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising