Blaupunkt | CALGARY MP36 | Operating instructions | Blaupunkt CALGARY MP36 Operating instructions

Blaupunkt CALGARY MP36 Operating instructions
Radio CD MP3
Calgary MP36
7 646 175 310
Operating instructions
http://www.blaupunkt.com
01CalgMP36_d
1
08.02.2006, 10:08 Uhr
1
2
3
4
13
12
6
5
11
10
7
9
8
2
01CalgMP36_d
2
08.02.2006, 10:08 Uhr
CONTROLS
1
2
3
4
5
6
7
8
9
:
Button to switch the device on/
off and operate the volume
mute function.
button for detaching the control panel (release panel).
button to eject a CD from the
device.
Volume control
CD compartment
AUDIO button to adjust the
bass, treble, balance and fader.
To select an equalizer preset.
MENU button
Short press: Open the settings
menu.
Long press: Start the scan function.
Arrow buttons
X-BASS button to activate/deactivate and adjust the XBASS.
TRAF•RDS button
Short press: Switch traffic-information standby on/off.
Long press: Switch the RDS
function on/off.
;
<
=
Keys 1 - 6
BND•TS button
Short press: Select the FM
memory banks and the MW
and LW wavebands.
Long press: Start the Travelstore function.
SRC
button
Short press: Switch sources between CD/MP3, CD changer (if
connected) and AUX.
Long press: Briefly display the
30
02CalgMP36_gb
30
08.02.2006, 9:38 Uhr
Switching to CD mode ................. 43
Selecting tracks ........................... 43
Fast track selection ...................... 43
Fast searching (audible) ............... 43
Random track play (MIX) .............. 44
Scanning tracks (SCAN) ............. 44
Repeating tracks (REPEAT) ......... 44
Pausing playback (PAUSE) .......... 44
Configuring the display ................ 44
Displaying CD text ....................... 45
CLOCK time .......................... 52
Sound .................................... 53
X-BASS ................................. 54
Configuring the level display 55
External audio sources ......... 55
Specifications ....................... 56
31
02CalgMP36_gb
31
ENGLISH
FRANÇAIS
ITALIANO
Switching to CD-changer mode ... 50
Selecting CDs ............................. 50
Selecting tracks ........................... 50
Fast searching (audible) ............... 50
Configuring the display ................ 50
Repeating individual tracks or
whole CDs (REPEAT) .................. 50
Random track play (MIX) .............. 51
Scanning all the tracks on all
the CDs (SCAN) .......................... 51
Pausing playback (PAUSE) .......... 51
NEDERLANDS
CD-changer mode ................ 50
SVENSKA
Preparing an MP3-CD ................. 46
Switching to MP3 mode ............... 47
Configuring the display ................ 47
Selecting a directory .................... 48
Selecting tracks/files .................... 48
Fast searching ............................. 48
Random track play (MIX) .............. 48
Scanning tracks (SCAN) ............. 49
Repeating individual tracks or
whole directories (REPEAT) ......... 49
Pausing playback (PAUSE) .......... 49
ESPAÑOL
Traffic information ................ 42
CD mode ............................... 43
MP3 mode ............................. 46
PORTUGUÊS
Adjusting the tuner settings .......... 37
Switching to radio mode .............. 37
RDS functions .............................. 37
Selecting the waveband /
memory bank ............................... 38
Tuning into a station ..................... 38
Setting the sensitivity of station
seek tuning .................................. 39
Storing stations ............................ 39
Storing stations automatically
(Travelstore) ................................. 39
Listening to stored stations .......... 39
Scanning receivable stations
(SCAN) ........................................ 39
Setting the scanning time ............. 40
Programme type (PTY) ................ 40
Optimising radio reception ........... 41
Configuring the display ................ 41
Traffic announcements in CD
mode ........................................... 45
Ejecting a CD .............................. 45
DANSK
Notes and accessories ......... 32
Removable control panel ...... 33
Switching on/off ................... 34
Adjusting the volume ............ 35
Radio mode ........................... 37
DEUTSCH
CONTENTS
08.02.2006, 9:38 Uhr
NOTES AND ACCESSORIES
Notes and accessories
Thank you for choosing a Blaupunkt
product. We hope you enjoy using this
new piece of equipment.
Please read these operating instructions before using the equipment for
the first time.
The Blaupunkt editors are constantly
working on making the operating instructions clearer and easier to understand. However, if you still have any
questions on how to operate the device, please contact your dealer or the
telephone hotline for your country. You
will find the telephone number printed
at the back of this booklet.
We provide a manufacturer guarantee
on our products bought within the European Union. You can view the guarantee conditions at www.blaupunkt.de
or ask for them directly at:
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
D-31139 Hildesheim
Gerrmany
Disposal of old unit
(EU countries only)
Do not dispose of your old device
in the household trash!
Use the return and collection systems
available to dispose of the old device.
Road safety
Road safety has absolute priority. Only operate your car sound
system if the road and traffic conditions allow you to do so. Familiarise yourself with the device before
setting off on your journey.
You must always be able to hear
police, fire service and ambulance
sirens in good time from inside your
vehicle. For this reason, listen to
your car sound system at a moderate volume level during your journey.
Installation
If you want to install your car sound
system yourself, please read the installation and connection instructions that
follow these operating instructions.
Optional equipment
(not part of the scope of delivery)
Use only accessories approved by
Blaupunkt.
Remote control
The steering wheel and/or handheld remote control allows you to access the
most important functions of your car
sound system safely and conveniently.
You cannot switch the device on/off using the remote control.
You can find out from your Blaupunkt
dealer or on the Internet at www.
blaupunkt.com which remote controls
can be used with your car sound system.
32
02CalgMP36_gb
32
08.02.2006, 9:38 Uhr
ACCESSORIES
Notes:
● Never drop the control panel.
● Never expose the control panel to
direct sunlight or other heat sources.
● Avoid making direct skin contact
with the control panel’s contacts. If
necessary, clean the contacts with
a lint-free cloth and some alcohol.
button 2.
The control panel locking mechanism
opens.
33
02CalgMP36_gb
33
ENGLISH
PORTUGUÊS
2
➮ Press the
FRANÇAIS
ESPAÑOL
Removing the control panel
ITALIANO
As a way of protecting your car radio
against theft, the unit is equipped with
a removable control panel (release panel). Without this control panel, the car
radio is worthless to a thief.
Protect you car radio against theft by
taking the control panel with you every
time you leave your vehicle. Do not leave the control panel in your vehicle not even in a hiding place.
The control panel has been designed
to be easy to use.
NEDERLANDS
You can connect the following Blaupunkt CD changers: CDC A 08, IDC A
09 and CDC A 03.
Theft protection
SVENSKA
CD changers
Removable control panel
08.02.2006, 9:38 Uhr
DANSK
Amplifiers
You can use all Blaupunkt and Velocity amplifiers.
DEUTSCH
CONTROL PANEL
CONTROL PANEL
SWITCHING ON/OFF
➮ First, pull the control panel straight
Switching on/off
off the unit and then out towards
the left.
The device switches off.
All the current settings are saved.
Any CD already inserted in the unit remains there.
You can switch the device on/off in the
following ways:
Attaching the control panel
➮ Slide the control panel from left to
right into the unit’s guide.
➮ Carefully press on the left edge of
the control panel until it clicks into
place.
Switching on/off using the vehicle
ignition
If the device is correctly connected to
the vehicle’s ignition and it was not
switched off using button 1, it will
switch on/off simultaneously with the
ignition.
Switching on/off using button 1
➮ To switch on the device, press
button 1.
➮ To switch off the device, press and
hold down button 1 for longer
than two seconds.
The device switches off.
Note:
● When attaching the control panel,
make sure you do not press the
display.
If the device was still switched on when
you removed the control panel, it will
automatically switch on again with the
last settings activated (i.e. radio, CD/
MP3, CD changer or AUX) when the
panel is replaced.
Note:
● To protect the vehicle battery, the
device will switch off automatically
after one hour if the ignition is off.
Switching on by inserting a CD
If the device is switched off and there
is no CD present in the drive,
➮ gently push the CD with its printed
side uppermost into the drive 5
until you feel some resistance.
The drive draws in the CD automatically.
You must not hinder or assist the drive
as it draws in the CD.
The device switches on and starts playing the CD.
34
02CalgMP36_gb
34
08.02.2006, 9:38 Uhr
The unit switches off.
➮ Attach the control panel again.
ENGLISH
button 4.
Setting the power-on volume
Note:
● The device is equipped with a
timeout function. If, for instance,
you press the MENU button 7
and select a menu item, the device will switch back approx. 8
seconds after the last button was
pressed. Any changes to the settings that you have made will be
saved.
You can set the power-on volume.
➮ Press the MENU button 7.
➮ Press the or button 8 repeatedly until “ON VOLUME” appears in the display.
➮ Adjust the power-on volume using
the
buttons 8.
To help you adjust the setting more
easily, the device will increase or decrease the volume as you make your
changes.
If you change the setting to “LAST
VOL”, the volume level that was set the
last time you switched off the device
will be activated again.
DANSK
The unit switches on. The settings (radio, CD/MP3, CD changer or AUX) that
were set before the unit was switched
off will be reactivated.
➮ press the
FRANÇAIS
➮ Remove the control panel.
button 4.
ITALIANO
To decrease the volume,
➮ press the
NEDERLANDS
Switching on/off using the
removable control panel
You can adjust the volume in steps
from 0 (off) to 66 (maximum).
To increase the volume,
SVENSKA
Adjusting the volume
ESPAÑOL
Note:
● If the vehicle ignition was switched
off before you inserted the CD,
you will first have to switch on the
device by pressing button 1 in
order to start playing the CD.
DEUTSCH
ADJUSTING THE VOLUME
PORTUGUÊS
SWITCHING ON/OFF
35
02CalgMP36_gb
35
08.02.2006, 9:38 Uhr
ADJUSTING THE VOLUME
Note:
● To protect your hearing, the power-on volume is limited to a value
of “38”. If the volume level was
higher than this when the device
was last switched off and the
“LAST VOL” setting is activated,
the system will reset the volume to
“38” when you switch the device
on again.
When you have finished adjusting the
setting,
Switching the confirmation
beep on/off
The system will play a confirmation
beep for some functions if you keep a
button pressed down for longer than
two seconds, for instance, when you
assign a radio station to a station button. You can switch the beep on/off.
➮ Press the MENU button 7.
➮ Press the or button 8 re-
➮ press the MENU button 7 twice.
peatedly until “BEEP ON” or
“BEEP OFF” appears in the display.
Quick volume reduction (mute)
➮ Activate/deactivate the beep using
You can quickly decrease the volume
(mute) to a level preset by you.
➮ Briefly press button 1.
“MUTE” appears in the display.
buttons 8. “OFF” means
the
the beep is switched off and “ON”
means the beep is switched on.
When you have finished adjusting the
setting,
Cancelling mute
To return to your previously set volume
level,
➮ press the MENU button 7.
➮ briefly press button 1 again.
If your device is connected to a mobile
telephone, the car radio’s volume will
be muted as soon as you “pick up” the
telephone. This requires that the mobile telephone be connected to the device as described in the installation instructions.
“PHONE” appears in the display.
Setting the mute level
You can adjust the mute level.
➮ Press the MENU button 7.
➮ Press the or button 8 repeatedly until “MUTE LVL” appears in the display.
Mute while telephoning
➮ Adjust the mute level using the
buttons 8.
When you have finished adjusting the
setting,
➮ press the MENU button 7 twice.
36
02CalgMP36_gb
36
08.02.2006, 9:38 Uhr
RADIO MODE
➮ press the SRC
Switching to radio mode
Note:
REGIONAL must be activated/deactivated separately in the menu.
●
➮ press the BND•TS button <
or
37
02CalgMP36_gb
37
ENGLISH
FRANÇAIS
DANSK
If you are in CD/MP3, CD-changer or
AUX mode,
ITALIANO
This device is equipped with an RDS
radio receiver (Radio Data System).
Many of the receivable FM stations
broadcast a signal that not only carries the programme but also additional information such as the station name
and programme type (PTY).
The station name appears in the display as soon as the tuner receives it.
The convenient RDS functions AF (Alternative Frequency) and REGIONAL
extend your radio’s range of functions.
● AF: If the RDS function is activated, the radio automatically tunes
into the best receivable frequency
for the station that is currently set.
● REGIONAL: At certain times,
some radio stations divide their
programme into regional programmes providing different content. You can use the REG function to prevent the car radio from
switching to alternative frequencies that are broadcasting different
programme content.
NEDERLANDS
RDS functions
SVENSKA
To ensure that the tuner works properly, the device must be configured for
the region in which it is being used. You
can choose between Europe (EUROPE), United States (USA), South
America (S-AMERICA) and Thailand
(THAI). By default, the tuner is set to
the region in which the device was sold.
If you encounter problems with radio
reception, please check this setting.
The radio functions described in these
operating instructions refer to the EUROPE tuner setting.
➮ Switch the device off using button
1.
➮ Press and hold down the 1 and 5
buttons ; simultaneously and
switch on the device again by
pressing button 1.
“TUNER” is displayed.
➮ Select your tuner region using the
or button 8.
To save the setting,
➮ switch the device off and on again
or wait approx. 8 seconds. The
car sound system switches on and
the mode that was selected last is
activated (radio, CD/MP3, CD
changer or AUX).
ESPAÑOL
Adjusting the tuner settings
DEUTSCH
button = repeatedly until the memory bank
(e.g. “FM1”) appears in the display.
PORTUGUÊS
Radio mode
08.02.2006, 9:38 Uhr
RADIO MODE
Switching the RDS function on/off
If you want to use the RDS functions
(AF and REGIONAL),
➮ press and hold down the TRAF
RDS button : for longer than two
seconds.
The RDS function is active when the
RDS symbol is shown in the display.
Tuning into a station
There are various ways of tuning into
a station.
Automatic station seek tuning
➮ Press the
or
button 8.
The radio tunes into the next receivable station.
Switching REGIONAL on/off
Tuning into stations manually
➮ Press the MENU button 7.
➮ Press the or button 8 re-
You can also tune into stations manually.
peatedly until “REG” appears in
the display. “OFF” or “ON” is displayed alongside “REG”.
➮ To switch REGIONAL on/off, press
the
or
button 8.
➮ Press the MENU button 7.
Selecting the waveband /
memory bank
You can use this device to receive programmes broadcast over the FM frequency range as well as the MW and
LW (AM) wavebands. There are three
memory banks available for the FM
waveband (FM1, FM2 and FMT) and
one for each of the MW and LW wavebands. Six stations can be stored in
each memory bank.
To switch between the FM memory
banks (FM1, FM2 and FMT) and the
MW and LW wavebands,
➮ briefly press the BND•TS button
<.
Note:
You can only tune into stations
manually if the RDS function is
deactivated.
●
➮ Press the
or
button 8.
Browsing through broadcasting
networks (only FM)
If radio stations provide several programmes, you have the option of
browsing through their “broadcasting
networks”.
Note:
● The RDS function must be activated before you can use this feature.
➮ Press the
or button 8 to
switch to the next station on the
broadcasting network.
Note:
● When using this feature, you will
only be able to switch to stations
that you have received once before already. To receive the stations, use the scan function or the
Travelstore function.
38
02CalgMP36_gb
38
08.02.2006, 9:38 Uhr
Storing stations
Storing stations manually
➮ Select the memory bank that you
want (FM1, FM2, FMT) or one of
the wavebands (MW or LW).
➮ Tune into the station that you
want.
➮ Press and hold down one of the
station buttons 1 - 6 ; for longer
than two seconds to assign the
station to that button.
Listening to stored stations
➮ Select the memory bank or waveband.
➮ Press the station button 1 - 6 ;
that corresponds to the station
that you want to listen to.
Scanning receivable stations
(SCAN)
You can use the scan function to listen
to all the receivable stations briefly. You
can set the scanning time in the menu
to between 5 and 30 seconds (in steps
of 5 seconds).
➮ Press and hold down the MENU
button 7 for longer than two seconds.
39
02CalgMP36_gb
39
ENGLISH
FRANÇAIS
ITALIANO
Starting SCAN
08.02.2006, 9:38 Uhr
DANSK
Note:
● You can set different sensitivity
levels for FM and MW or LW
(AM).
Note:
● Any stations previously stored in
this memory bank are deleted in
the process.
➮ Press and hold down the BND•TS
button < for longer than two seconds.
The storing procedure begins. “FM
TSTORE” appears in the display. After
the process has completed, the radio
will play the station that is stored in
memory location 1 of the FMT memory bank.
NEDERLANDS
You can automatically store the six stations providing the best reception in the
region (only FM). The stations are
stored in the FMT memory bank.
SVENSKA
You can choose whether the radio
should only tune into stations providing good reception or whether it can
also tune into those with a weak reception.
➮ Press the MENU button 7.
➮ Press the or button 8 repeatedly until “SENS” and the currently set value appear in the display.
“SENS HI6” means that the tuner is set
to the highest sensitivity setting. “SENS
LO1” means it is set to the lowest sensitivity setting.
➮ Set the desired sensitivity using
the
buttons 8.
When you have finished adjusting the
setting,
➮ press the MENU button 7.
ESPAÑOL
Storing stations automatically
(Travelstore)
PORTUGUÊS
Setting the sensitivity of station
seek tuning
DEUTSCH
RADIO MODE
RADIO MODE
Scanning begins. “SCAN” appears
briefly in the display followed by a flashing display of the current station name
or frequency.
Cancelling SCAN and continuing
listening to a station
➮ Press the MENU button 7.
Scanning stops and the radio continues playing the station that it tuned into
last.
Setting the scanning time
➮ Press the MENU button 7.
➮ Press the or button 8 repeatedly until “SCAN TIME” appears in the display.
➮ Set the desired scanning time using the
buttons 8.
When you have finished adjusting the
setting,
➮ press the MENU button 7 twice.
Note:
● The scanning time that you set is
also used when scanning in CD/
MP3 mode and in CD-changer
mode.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide information on the type of programme they
are broadcasting. Your car radio can
receive and display this information.
For example, the programme types
can be:
CULTURE
TRAVEL
JAZZ
SPORT
NEWS
POP
ROCK
CLASSICS
You can use the PTY function to select stations of a particular programme
type.
PTY-EON
If you specify the programme type and
start seek tuning, the radio will switch
from the current station to a station of
the selected programme type.
Notes:
● If the tuner does not find a station
that matches the selected programme type, you will hear a beep
and “NO PTY” appears briefly in
the display. The radio will then retune to the station that it received
last.
● If the tuned radio station or another station on the broadcasting network broadcasts your selected
programme type at a later point in
time, the radio will automatically
switch from the currently tuned
station or from CD mode or CDchanger mode to the station
whose programme type matches
the one you selected.
● If you do not want this PTY EON
switching, disable it in the menu
with “PTY OFF”. First, press one
of the SRC = or BND•TS buttons <.
Switching PTY on/off
➮ Press the MENU button 7.
➮ Press the or button 8 repeatedly until “PTY ON” or “PTY
OFF” appears in the display.
40
02CalgMP36_gb
40
08.02.2006, 9:38 Uhr
peatedly until “PTY LANG” appears in the display.
➮ Set your preferred language using
buttons 8.
the
When you have finished adjusting the
setting,
➮ press the MENU button 7 twice.
Selecting a programme type and
starting seek tuning
➮ Press the
or
button 8.
The current programme type appears
in the display.
➮ If you want to select another programme type, you can do so by
pressing the or button 8
whilst this display is visible.
The selected programme type appears
briefly in the display.
➮ Press the
or button 8 to
start seek tuning.
The radio will then tune into the next
station it finds that matches your selected programme type.
Configuring the display
In radio mode you have the option of
displaying the waveband together with
the memory bank / memory location
and the time or the station name / frequency of the current station.
Select “FREQUENCY” to display the
station name / frequency or select
“CLOCK” to display the waveband together with the memory bank / memory location and the clock time.
➮ Press the MENU button 7.
➮ Press the or button 8 repeatedly until “TUN DISP” appears in the display.
➮ Press the or button 8 to
switch between “CLOCK” and
“FREQUENCY”.
➮ Press the MENU button 7 twice.
41
02CalgMP36_gb
41
08.02.2006, 9:38 Uhr
ENGLISH
FRANÇAIS
ITALIANO
➮ Press the MENU button 7.
➮ Press the or button 8 re-
Switching HICUT on/off
➮ Press the MENU button 7.
➮ Press the or button 8 repeatedly until “HICUT” appears in
the display.
➮ Press the or button 8 to adjust the HICUT setting.
“HICUT 0” means that the interference
level will not be cut automatically. “HICUT 1” means that it will be cut automatically.
➮ Press the MENU button 7.
NEDERLANDS
You can select the language in which
the programme types are displayed.
The following are available:
“DEUTSCH”, “ENGLISH” and
“FRANÇAIS”.
SVENSKA
Selecting the PTY language
HICUT
The HICUT function improves reception during poor radio reception (only
FM). If interference occurs, the interference level is cut automatically.
ESPAÑOL
➮ Press the MENU button 7.
Optimising radio reception
PORTUGUÊS
or button 8 to
switch PTY ON or OFF.
DANSK
➮ Press the
DEUTSCH
RADIO MODE
TRAFFIC INFORMATION
Traffic information
if you retune the radio from a traffic information station to a station
that does not broadcast traffic information.
If you hear the warning beep, you can
either switch off traffic information priority or tune into a station that broadcasts traffic information.
●
Your device is equipped with an RDSEON receiver. EON stands for Enhanced Other Network.
Whenever a traffic announcement (TA)
is broadcast, the system switches automatically from a station that does not
provide traffic reports to the appropriate traffic information station within the
broadcasting network that does.
Once the traffic report has been played,
the system will switch back to the programme you were listening to before.
Switching traffic information
priority on/off
➮ Briefly press the TRAF•RDS but-
ton :.
Traffic announcement priority is active
when the traffic jam symbol is shown
in the display.
Notes:
You will hear a warning beep:
● if you leave the reception area of
a traffic information station that
you are currently listening to.
● if you are receiving a traffic information station and the volume is
set to minimum (0) or if, whilst listening to a CD/MP3, a CD in the
changer or an AUX source, you
leave the reception area of the
tuned traffic information station
and the subsequent automatic
search cannot find a new traffic
information station.
Setting the volume for traffic
announcements
➮ Press the MENU button 7.
➮ Press the or button 8 repeatedly until “TA VOLUME” appears in the display.
➮ Adjust the volume using the
buttons 8.
When you have finished adjusting the
setting,
➮ press the MENU button 7 twice.
Notes:
You can use the volume control
4 to adjust the volume during a
traffic announcement for the duration of that announcement.
● You can set the volume distribution for the traffic announcements.
For further details, please read the
“Sound” chapter.
●
42
02CalgMP36_gb
42
08.02.2006, 9:38 Uhr
Fast track selection
For fast track selection (backwards or
forwards),
➮ press and hold down one of the
Switching to CD mode
If there is no CD inserted in the drive,
➮ gently push the CD with the printed side uppermost into the CD
compartment 5 until you feel
some resistance.
The drive draws in the CD automatically.
You must not assist or hinder the drive
as it draws in the CD.
The CD starts playing.
buttons 8 until fast-reverse /
fast-forward track selection begins.
43
ENGLISH
FRANÇAIS
Fast searching (audible)
For fast searching (backwards or forwards),
➮ press and hold down one of the
buttons 8 until fast searching backwards / forwards begins.
43
02CalgMP36_gb
ITALIANO
to select the next or previous
track.
If you press the or button 8 once,
the current track will be played again
from the beginning.
NEDERLANDS
Selecting tracks
➮ Press one of the arrow buttons 8
SVENSKA
To ensure the system functions properly, only use CDs labelled with the
compact disc logo. Problems might be
experienced when playing copy-protected CDs. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!
Besides being able to play audio CDs
on this device, you can also play CDs
containing MP3 music files. For further
details, please read the “MP3 mode”
chapter.
ESPAÑOL
Risk of severe damage to the
CD drive!
Contoured CDs (shape CDs) are
not suitable for playback in this unit.
We do not accept responsibility for
any damage to the CD drive that
may occur as a result of the use of
unsuitable CDs.
08.02.2006, 9:38 Uhr
PORTUGUÊS
You can use this device to play standard audio CDs, CD-Rs and CD-RWs
with a diameter of 12 or 8 cm.
Note:
● If the vehicle ignition was switched
off before you inserted the CD,
you will first have to switch on the
device by pressing button 1 in
order to start playing the CD.
If there is already a CD inserted in the
drive,
➮ press the SRC button = repeatedly until “CD” appears in the
display.
Playback begins from the point at
which it was last interrupted.
DANSK
CD mode
DEUTSCH
CD MODE
CD MODE
Random track play (MIX)
➮ Press the 5 MIX button ;.
Repeating tracks (REPEAT)
“MIX CD” appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
➮ press the 4 RPT button ;.
Cancelling MIX
➮ Press the 5 MIX button ; again.
“MIX OFF” appears briefly in the display and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks
on the CD.
➮ Press and hold down the MENU
button 7 for longer than two seconds.
The next track will then be scanned.
Note:
● You can set the scanning time.
For further details, please read the
section entitled “Setting the scanning time” in the “Radio mode”
chapter.
Cancelling SCAN and continuing
listening to a track
➮ To cancel scanning, press the
MENU button 7.
The currently scanned track will then
continue to be played normally.
If you want to repeat a track,
“RPT TRCK” appears briefly in the display and the RPT symbol lights up. The
track is repeated continuously until you
deactivate RPT.
Cancelling REPEAT
If you want to cancel the repeat function,
➮ press the 4 RPT button ; again.
“RPT TRCK” appears briefly in the display and the RPT symbol is displayed.
Pausing playback (PAUSE)
➮ Press button 3 ;.
“PAUSE” appears in the display.
Cancelling pause
➮ Press button 3
; whilst pause
is activated.
Playback is resumed.
Configuring the display
You can choose between two display
types for CD mode:
● Track number and clock time
● Track number and playing time
➮ Press the MENU button 7.
➮ Press the or button 8 repeatedly until “CD DISP” appears
in the display.
➮ Press the or button 8 to
switch between “PLAY TIME” and
“CLOCK”.
➮ Press the MENU button 7 twice.
44
02CalgMP36_gb
44
08.02.2006, 9:38 Uhr
Switching CD text on/off
➮ Press the MENU button 7.
➮ Press the or button 8 re-
➮ Remove the CD.
Notes:
If a CD is ejected, the drive will
automatically draw it back in again
after approx. 10 seconds.
● You can also eject CDs whilst the
device is switched off or whilst another audio source is activated.
●
ENGLISH
CD compartment.
The CD is ejected.
FRANÇAIS
Some CDs include CD text. The CD
text might contain the names of the
artist, album and track.
You can allow the CD text to be displayed as scrolling text every time you
switch to another track. The default display will appear again after the whole
CD text has been shown once. For further details, please read the section
entitled “Configuring the display”.
Ejecting a CD
➮ Press the button 3 next to the
ITALIANO
Displaying CD text
DEUTSCH
CD MODE
peatedly until “CD TEXT” appears
in the display.
NEDERLANDS
➮ Switch the CD text function on
SVENSKA
(“TEXT ON”) or off (“TEXT OFF”)
using the or button 8.
When you have finished adjusting the
setting,
➮ press the MENU button 7 twice.
ESPAÑOL
Traffic announcements in CD
mode
If you wish to receive traffic announcements whilst CD mode is activated,
➮ press the TRAF•RDS button :.
DANSK
PORTUGUÊS
Traffic announcement priority is active
when the traffic jam symbol is shown
in the display. For further details, please
read the “Traffic information reception”
chapter.
45
02CalgMP36_gb
45
08.02.2006, 9:38 Uhr
MP3 MODE
MP3 mode
You can also use this car sound system to play CD-Rs and CD-RWs that
contain MP3 music files.
D01
D02
Preparing an MP3-CD
The various combinations of CD burners, CD burning software and CD
blanks may lead to problems arising
with the device’s ability to play certain
CDs. If problems occur with your own
burned CDs, you should try another
brand of CD blank or choose another
colour of CD blank.
The format of the CD must be ISO 9660
Level 1 / Level 2 or Joliet. Other formats cannot be played reliably.
You can create a maximum of 252 directories on a CD. You can use this
device to access each of the directories.
Regardless of the number of directories on the CD, the device can handle
up to 999 MP3 files on a single CD with
a maximum of 255 files in a directory.
D03
T001
T002
T003
T004
T005
T001
T002
T003
T004
T005
T006
D04
T001
T002
T003
T004
T005
T006
T007
T008
T009
T010
T011
D
i
r
e
c
t
o
r
i
e
s
T
r
a
c
k
s
•
F
i
l
e
s
Each directory can be given a name
using a PC. The device is capable of
displaying the directory name. You
should name the directories and tracks/
files using the method provided by your
CD burner software. The software’s instruction manual will provide details on
how to do this.
Note:
● When naming directories and
tracks/files you should not use accents and special characters.
If you like your files to be in the correct
order, you should use burner software
that places files in alphanumerical order. If your software does not provide
this feature you also have the option
of sorting the files manually. To do so,
you should place a number (e.g. “001”,
46
02CalgMP36_gb
46
08.02.2006, 9:38 Uhr
Switching to MP3 mode
MP3 mode is activated in the same
way as normal CD mode. For further
details, please read the section entitled “Switching to CD mode” in the “CD
mode” chapter.
Note:
● After you switch tracks, the device
first displays the MP3 scrolling text
once and then it displays the information continuously.
To switch between the different display
options,
➮ press the MENU button 7.
➮ Press the or button 8 repeatedly until “CD DISP” appears
in the display.
➮ Select the option that you want
using the or button 8.
When you have finished adjusting the
setting,
➮ press the MENU button 7 twice.
47
02CalgMP36_gb
47
08.02.2006, 9:38 Uhr
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
You can display various types of information on the current track:
● Track number and playing time
(“TRCK-TIME”)
● Track number and clock time
(“TRCK-CLK”)
● Directory number and track
number (“DIR-TRCK”)
● Directory number and clock time
(“DIR-CLK”)
● Directory number and playing time
(“DIR-TIME”)
SVENSKA
Configuring the default display
ESPAÑOL
An MP3-CD must already be inserted
in the device before you can change
the following settings.
PORTUGUÊS
Note:
To ensure uninterrupted playback,
● do not attempt to change the file
extension to “.MP3” of any files
other than MP3 files and then attempt to play them! The device will
ignore these invalid files during
playback.
● Do not use “mixed” CDs containing both non-MP3 data and MP3
tracks (the device only reads MP3
files during MP3 playback).
● Do not use mix-mode CDs containing both CD audio tracks and
MP3 tracks. If you try playing a
mix-mode CD, the device will only
play the CD audio tracks.
Configuring the display
DANSK
“002”, etc.) at the beginning of each
file name - you must include the leading zeros.
MP3 tracks can contain additional information such as the artist, album and
track names (ID3 tags). This device
can display ID3 tags (version 1).
When creating (encoding) MP3 files
from audio files, you should use bit
rates up to a maximum of 256 kbits/
sec.
This device can only play MP3 files that
have the “.MP3” file extension.
DEUTSCH
MP3 MODE
MP3 MODE
Configuring the MP3 scrolling text
One of the following scrolling texts is
displayed once every time the track is
changed. Afterwards, the configured
default display is shown.
The available scrolling texts are:
● Directory name (“DIR NAME”)
● Track name (“SONG NAME”)
● Album name (“ALBM NAME”)
● Artist name (“ARTIST”)
● File name (“FILE NAME”)
Note:
● The artist, track and album names
are part of the MP3-ID tag (version 1) and can only be displayed
if they have been saved with the
MP3 files (for further details,
please read the instructions that
came with your PC’s MP3 software or burner software).
To switch between the different display
options,
➮ press the MENU button 7.
➮ Press the or button 8 repeatedly until “MP3 DISP” appears in the display.
➮ Use the
or button 8 to select
the MP3 scrolling text that you
want.
When you have finished adjusting the
setting,
➮ press the MENU button 7 twice.
Selecting a directory
To move up or down to another directory,
➮ press the
or button 8 once
or several times.
Selecting tracks/files
To move up or down to another track/
file in the current directory,
➮ press the or button 8 once
or several times.
If you press the button 8 once, the
current track will be played again from
the beginning.
Fast searching
For fast searching (backwards or forwards),
➮ press and hold down the or
button 8 until fast searching
backwards / forwards begins.
Random track play (MIX)
To play the tracks in the current directory in random order,
➮ briefly press the 5 MIX button ;.
“MIX DIR” appears in the display and
the MIX symbol lights up.
To play all the tracks on the inserted
MP3-CD in random order,
➮ press and hold down the 5 MIX
button ; for longer than two seconds.
“MIX CD” appears in the display and
the MIX symbol lights up.
48
02CalgMP36_gb
48
08.02.2006, 9:38 Uhr
Note:
● You can set the scanning time.
For details on setting the scanning
time, please read the section entitled “Setting the scanning time” in
the “Radio mode” chapter.
Cancelling SCAN and continuing
listening to a track
➮ Briefly press the MENU button 7.
button ; for longer than two seconds.
“RPT DIR” appears in the display.
Cancelling REPEAT
To stop the current track or current directory from being repeated,
➮ briefly press the 4 RPT button ;.
“RPT OFF” appears briefly and RPT
disappears from the display.
Pausing playback (PAUSE)
➮ Press button 3 ;.
“PAUSE” appears in the display.
Cancelling pause
ENGLISH
➮ Press button 3
; whilst pause
is activated.
Playback is resumed.
DANSK
PORTUGUÊS
The currently scanned track will then
continue to be played normally.
➮ press and hold down the 4 RPT
FRANÇAIS
button 7 for longer than two seconds. The next track will then be
scanned.
“TRK SCAN” appears in the display
alongside the flashing track numbers.
The tracks on the CD are briefly played
in ascending order.
“RPT TRCK” appears briefly in the display and RPT lights up.
To play the whole directory repeatedly,
ITALIANO
➮ Press and hold down the MENU
➮ briefly press the 4 RPT button ;.
NEDERLANDS
You can scan (briefly play) all the tracks
on the CD.
To play the current track repeatedly,
SVENSKA
Scanning tracks (SCAN)
Repeating individual tracks or
whole directories (REPEAT)
ESPAÑOL
Cancelling MIX
To cancel MIX,
➮ briefly press the 5 MIX button ;.
“MIX OFF” appears in the display and
the MIX symbol disappears.
DEUTSCH
MP3 MODE
49
02CalgMP36_gb
49
08.02.2006, 9:38 Uhr
CD-CHANGER MODE
CD-changer mode
Configuring the display
Note:
● Information on handling CDs, inserting CDs and operating the CD
changer can be found in the operating instructions supplied with
your CD changer.
There are five display options available for CD-changer mode:
● Track number and playing time
(“TRCK-TIME”)
● Track number and clock time
(“TRCK-CLK”)
● CD number and track number
(“CD-TRCK”)
● CD number and clock time
(“CD-CLK”)
● CD number and playing time
(“CD-TIME”)
Switching to CD-changer mode
➮ Press the SRC button = repeatedly until “CHANGER” appears in the display.
The device starts playing the first CD
that the CD changer detects.
Selecting CDs
To move up or down to another CD,
➮ press the
or button 8 once
or several times.
Note:
● The device will ignore empty CD
slots in the changer and slots containing invalid CDs.
➮ Press the MENU button 7.
➮ Press the or button 8 repeatedly until “CDC DISP” appears in the display.
➮ Press the
or button 8 repeatedly until the option that you
want is displayed.
➮ Press the MENU button 7 twice.
Selecting tracks
Repeating individual tracks or
whole CDs (REPEAT)
To move up or down to another track
on the current CD,
To repeat the current track,
➮ press the
or button 8 once
or several times.
Fast searching (audible)
For fast searching (backwards or forwards),
➮ press and hold down one of the
buttons 8 until fast searching backwards / forwards begins.
➮ briefly press the 4 RPT button ;.
“RPT TRCK” appears briefly in the display and RPT is displayed.
To repeat the current CD,
➮ press and hold down the 4 RPT
button ; for longer than two seconds.
“RPT DISC” appears briefly in the display and RPT is displayed.
50
02CalgMP36_gb
50
08.02.2006, 9:38 Uhr
➮ briefly press the 5 MIX button ;.
“MIX CD” appears briefly in the display
and MIX is displayed.
To play the tracks on all the inserted
CDs in random order,
➮ press and hold down the 5 MIX
button ; for longer than two seconds.
“MIX ALL” appears briefly in the display and MIX is displayed.
Cancelling MIX
➮ Briefly press the 5 MIX button ;.
“MIX OFF” appears and MIX disappears from the display.
Cancelling SCAN
To stop scanning,
➮ briefly press the MENU button 7.
The currently scanned track will then
continue to be played normally.
Note:
You can set the scanning time.
For further details, please read the
section entitled “Setting the scanning time” in the “Radio mode”
chapter.
●
Pausing playback (PAUSE)
➮ Press button 3 ;.
ENGLISH
FRANÇAIS
To play the tracks on the current CD in
random order,
ITALIANO
Random track play (MIX)
NEDERLANDS
“RPT OFF” appears and RPT disappears from the display.
To scan (briefly play) all the tracks on
all the inserted CDs in ascending order,
➮ press and hold down the MENU
button 7 for longer than two seconds.
“TRK SCAN” appears in the display
and the number of the current track
flashes.
SVENSKA
➮ briefly press the 4 RPT button ;.
Scanning all the tracks on all
the CDs (SCAN)
ESPAÑOL
Cancelling REPEAT
To stop the current track or current CD
from being repeated,
DEUTSCH
CD-CHANGER MODE
“PAUSE” appears in the display.
Cancelling pause
DANSK
; whilst pause
is activated.
Playback is resumed.
PORTUGUÊS
➮ Press button 3
51
02CalgMP36_gb
51
08.02.2006, 9:38 Uhr
CLOCK TIME
CLOCK time
When you have finished adjusting the
setting,
Displaying the clock time
➮ press the MENU button 7.
To display the clock time briefly,
➮ press and hold down the SRC
button = until the clock time appears in the display.
Displaying the time
continuously when the device is
off and the ignition is on
Setting the clock time
To display the time when the device is
off and the vehicle ignition is on,
To set the clock time,
➮ press the MENU button 7.
➮ press the MENU button 7.
➮ Press the or button 8 repeatedly until “CLOCK SET” appears in the display.
➮ Press the
button 8.
“MENU” appears in the display.
➮ Press the
or button 8 repeatedly until “CLOCK OFF” or
“CLOCK ON” appears in the display.
➮ Press the
➮ Adjust the hours using the
or button 8 to
switch between the ON/OFF settings.
When you have finished adjusting the
setting,
➮ press the
➮ press the MENU button 7.
The clock time appears in the display.
The hours flash and can be adjusted.
buttons 8.
Once the hours are set,
button 8.
The minutes flash.
➮ Adjust the minutes using the
buttons 8.
➮ Press the MENU button 7 twice.
Selecting 12/24-hour clock
mode
➮ Press the MENU button 7.
Briefly displaying the time
when the device is switched off
To display the time briefly when the device is off,
➮ press the SRC
button =.
The time is displayed for approx. 8 seconds.
“MENU” appears in the display.
➮ Press the
or button 8 repeatedly until “24 H MODE” or “12
H MODE” appears in the display.
➮ Press the
or button 8 to
switch between the modes.
52
02CalgMP36_gb
52
08.02.2006, 9:38 Uhr
➮ Press the
or button 8 to adjust the bass.
When you have finished adjusting the
setting,
➮ press the AUDIO button 6.
Adjusting the treble
➮ Press the AUDIO button 6.
“BASS” appears in the display.
➮ Press the
button 8 repeatedly
until “TREBLE” appears in the display.
➮ Press the
or button 8 to adjust the treble.
When you have finished adjusting the
setting,
➮ Press the
or button 8 to adjust the balance (right/left).
When you have finished adjusting the
setting,
➮ press the AUDIO button 6.
Adjusting the front/rear volume
distribution (fader)
To adjust the front/rear volume distribution (fader),
➮ press the AUDIO button 6.
➮ Press the
button 8 repeatedly
until “FADER” appears in the display.
➮ Press the
or button 8 to adjust the fader (front/rear).
When you have finished adjusting the
setting,
➮ press the AUDIO button 6.
DANSK
53
53
ENGLISH
“BASS” appears in the display.
➮ press the AUDIO button 6.
02CalgMP36_gb
FRANÇAIS
button 8 repeatedly
until “BAL” appears in the display.
ITALIANO
➮ Press the
NEDERLANDS
“BASS” appears in the display.
➮ press the AUDIO button 6.
“BASS” appears in the display.
SVENSKA
Adjusting the bass
➮ Press the AUDIO button 6.
To adjust the left/right volume distribution (balance),
ESPAÑOL
You can adjust the sound settings
(bass and treble) separately for each
source (radio, CD/MP3, CD changer
or AUX).
The volume distribution settings (balance and fader) apply to all the audio
sources (except for traffic announcements).
You can only adjust the balance and
fader settings for traffic announcements whilst a traffic announcement
is actually being played.
Setting the left/right volume
distribution (balance)
PORTUGUÊS
Sound
DEUTSCH
SOUND
08.02.2006, 9:38 Uhr
SOUND
X-BASS
Equalizer presets
X-BASS
This device is equipped with an equalizer that has been preset with settings
for the “ROCK”, “POP” and “CLASSIC”
music styles.
To select an equalizer preset,
You can use the X-Bass feature to
boost the bass at low volume levels.
The selected X-Bass setting affects all
the audio sources (radio, CD/MP3, CD
changer or AUX).
You can set the X-BASS boost in steps
ranging from 1 to 3.
“XBASS OFF” means that the X-BASS
function is switched off.
➮ press the AUDIO button 6.
“BASS” appears in the display.
➮ Press the
button 8 repeatedly
until “POP”, “ROCK”, “CLASSIC”
or “EQ OFF” appears in the display.
➮ Press the
or button 8 to select one of the presets or select
“EQ OFF” to switch off the equalizer. If you select one of the presets, it is shown continuously in
the display.
When you have finished adjusting the
setting,
Adjusting the X-BASS boost
➮ Press the X-BASS button 9.
➮ Press the or button 8 repeatedly until the setting that you
want appears in the display.
When you have finished adjusting the
setting,
➮ press the X-BASS button 9.
➮ press the AUDIO button 6.
54
02CalgMP36_gb
54
08.02.2006, 9:38 Uhr
➮ Press the
or button 8 to
switch between “PEAK ON” and
“PEAK OFF”.
When you have finished adjusting the
setting,
➮ press the MENU button 7 twice.
Note:
● If no CD changer is connected,
the AUX input must be activated in
the menu.
Switching the AUX input on/off
➮ Press the MENU button 7.
“MENU” appears in the display.
➮ Press the
or button 8 repeatedly until “AUX OFF” or “AUX
ON” appears in the display.
➮ Press the
or button 8 to
switch AUX on/off.
When you have finished adjusting the
setting,
➮ press the MENU button 7.
Note:
If the AUX input is activated, you
can select it by pressing the SRC
button =. “AUX INPUT” then
appears in the display.
ENGLISH
FRANÇAIS
DANSK
●
ITALIANO
or button 8 repeatedly until “PEAK LVL” appears in the display.
NEDERLANDS
➮ Press the
SVENSKA
➮ Press the MENU button 7.
“MENU” appears in the display.
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output. Audio
sources can, for example, be portable
CD players, MiniDisc players or MP3
players.
If you want to connect an external audio source, you will need an adapter
cable. You can obtain this cable (Blaupunkt no.: 7 607 897 093) from your
authorised Blaupunkt dealer.
ESPAÑOL
The level display temporarily provides
you with a symbolic representation of
the volume and audio settings whilst
you are adjusting them.
When you are not changing any settings, the level display depicts the peak
music/speech output. You can switch
the level display on/off.
External audio sources
PORTUGUÊS
Configuring the level
display
DEUTSCH
EXTERNAL AUDIO SOURCES
LEVEL DISPLAY
55
02CalgMP36_gb
55
08.02.2006, 9:38 Uhr
SPECIFICATIONS
Specifications
Amplifier
Output power:
4 x 25 watts sine
in accordance with
DIN 45 324
at 14.4 V
4 x 45 watts max.
power
Tuner
Wavebands in Europe:
FM :
87.5 - 108 MHz
MW :
531 - 1 602 kHz
LW :
153 - 279 kHz
FM frequency response:
35 - 16,000 Hz
CD
Frequency response:
20 - 20,000 Hz
Pre-amp out
4 channels:
2V
Input sensitivity
AUX input:
2 V / 6 kΩ
Weight
1.33 kg
Subject to changes!
56
02CalgMP36_gb
56
08.02.2006, 9:38 Uhr
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
DANSK
PORTUGUÊS
ESPAÑOL
Bitte den ausgefüllten Gerätepass sicher aufbewahren!
Please keep the filled-in radio pass in a safe place!
Prière de conserver soigneusement la carte d’autoradio remplie !
Tenete per favore il libretto di apparecchio, debitamente riempito,
in un posto sicuro!
Bewaar de ingevulde apparaatpas op een veilige plaats!
Vänligen förvara ifyllt apparatpass på säker plats!
¡Favor guardar el documento del aparato debidamente llenado en
un lugar seguro!
Por favor, guardar o cartão preenchido do aparelho num lugar
seguro!
Det udfyldte apparatpas opbevares et sikkert sted!
255
EA_CalgMP36
255
08.02.2006, 9:35 Uhr
Country:
Germany
Austria
Belgium
Denmark
Finland
France
Great Britain
Greece
Ireland
Italy
Luxembourg
Netherlands
Norway
Portugal
Spain
Sweden
Switzerland
Czech. Rep.
Hungary
Poland
Turkey
USA
Brasil
(Mercosur)
Malaysia
(Asia Pacific)
Phone:
Fax:
WWW:
(D)
(A)
(B)
(DK)
(FIN)
(F)
(GB)
(GR)
(IRL)
(I)
(L)
(NL)
(N)
(P)
(E)
(S)
(CH)
(CZ)
(H)
(PL)
(TR)
(USA)
0180-5000225
01-610 39 0
02-525 5444
44 898 360
09-435 991
01-4010 7007
01-89583 8880
210 94 27 337
01-46 66 700
02-369 62331
40 4078
0800 400 1010
66-817 000
2185 00144
902 52 77 70
08-7501850
01-8471644
02-6130 0446
76 511 803
0800-118922
0212-335 06 71
800-950-2528
05121-49 4002
01-610 39 391
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
210 94 12 711
01-46 66 706
02-369 62464
40 2085
0800 400 1040
66-817 157
2185 00165
91 410 4078
08-7501810
01-8471650
02-6130 0514
76 511 809
022-8771260
0212-346 00 40
708-6817188
http://www.blaupunkt.com
(BR)
0800 7045446
+55-19 3745 2773
(MAL) +604-6382 474
+604-6413 640
Gerätepass
Calgary MP36
Name:
..................................................................
Typ:
7 646 175 310
..................................................................
Serien-Nr.:
BP .............................................................
Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim
02/06 - CM-AS/SCS
(dt, gb, fr, it, nl, sw, es, pt, dk)
EA_CalgMP36
8622404875
256
10.02.2006, 16:49 Uhr
*
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising