Belkin | F1DV108Aea | ExpandView™ CAT5

ExpandView™ CAT5
ExpandView™ CAT5
En
� ���
���� ��
������ ����
��
�������
��
� ���
�
�����������
� ��
��� �������
���
Quick Installation Guide
F1DV108Aea
TABLE OF CONTENTS
INTRODUCTION
Intoduction
1. What is the ExpandView™ CAT5? ............................................................. 1
1. What is the ExpandView™ CAT5?
Overview
2. The multi-functional ExpandView™ CAT5 ................................................. 2
3. The ExpandView™ CAT5 ........................................................................... 3
Installation
4. Expanding the ExpandView™ CAT5 .......................................................... 5
5. Pre-installation instructions ..................................................................... 5
6. The ExpandView™ CAT5 cables................................................................ 5
The Remote Video cable .......................................................................... 6
Connecting the CAT5 cables .................................................................... 6
Power supply ............................................................................................ 6
Configuration
7. The ExpandView™ CAT5 configuration for a CBT application .................. 7
8. ExpandView™ CAT5 detailed connections ................................................ 8
9. The ExpandView™ CAT5 configuration without remote computers ......... 9
10. Operating the ExpandView™ CAT5 ....................................................... 10
The ExpandView™ CAT5 from Belkin broadcasts real-time high-resolution video
signals to hundreds of remote display monitors.
The ExpandView™ CAT5 consists of the following:
• Broadcaster + Control Unit
• Line Splitters to expand the system
• Remote module that connect to each remote monitor/computer
• Dual Remote module connects 2 monitors to the system
CAT5 UTP or FTP cables connect the ExpandView™ CAT5.
The Remote units can be up to 110m/360ft away from the Broadcaster.
This Quick Installation Guide illustrates the ExpandView™ CAT5
and explains how to install and operate it.
Technical Specifications
Technical Specifications ............................................................................. 11
1
OVERVIEW
OVERVIEW
2. The multi-functional ExpandView™ CAT5
3. The ExpandView™ CAT5
You can use the ExpandView™ CAT5 in the following ways:
The figures below illustrate the Broadcaster module, Line Splitter, Remote
module and Dual Remote module.
(A) Without the Control Unit
The ExpandView™ CAT5 constantly broadcasts a computer screen to all
remote monitors.
(B) With the Control Unit
• Broadcast a computer screen to all remote monitors
Broadcaster Module
Power
Connector
System
Cables
Monitor
• Darken all remote screens
• Release the remote screens to allow local monitor viewing (when remote
computers are connected).
The screen dark function is useful when carrying out maintenance, changing
the broadcast program or in a classroom environment to grab students’
attention.
With both applications broadcast the video up to resolutions
of 1600 x 1200 @ 75Hz depending on the cable length.
ExpandView CAT5
Control Unit
Video Cable
Linesplitter
Power
Connector
System
Cables
System cable from Broadcaster or
previus Line Splitter
2
3
OVERVIEW
INSTALLATION
Remote Module
Video
Cable
4. Expanding the ExpandView™ CAT5
System
Cables
Picture
adjuster
You can expand the ExpandView™ CAT5 to 512 Remote modules by having
2 levels of Line Splitters. Level 1 Line Splitters can have 8 Remote modules or
Line Splitters connected. Level 2 Line Splitters can have 8 Remote modules
connected. (See page 7).
5. Pre-installation instructions
SIDE A
SIDE B
Monitor
Note! In the ExpandView™ CAT5 the CAT5 UTP or FTP cables carry electrical
power. Therefore do NOT connect them to any other device. To avoid this we
recommend you attach the stickers provided to the ends of each cable.
Place cables away from fluorescent lights, air conditioners and machines
that are likely to generate electrical noise.
6. The ExpandView™ CAT5 VGA video cables
The Video cable is illustrated below. Connect the cable as explained.
Dual Remote Module
To monitors
Broadcaster & Remote Video cable
Dual Remote
Module
To Computer’s
Video Card
To Broadcaster’s
or Remote’s Video
In port
System
Cables
To monitors
4
5
INSTALLATION
CONFIGURATION
The Remote Video cable
The Remote Video cable is only used with the Remote module when the
Dongle is connected to a computer.
7. The ExpandView™ CAT5 configuration for a CBT application
Connecting the CAT5 cables
Please note! Connect the CAT5 cables to the Broadcaster and Line Splitter
modules when the modules are powered off. We recommend that you
connect the CAT5 cables BEFORE connecting the power supply.
Power supply
Connect the Broadcaster and Line Splitters to the power supply with the
12 VDC, 2A from the AC/DC adapter provided. The Remote modules and
the Dual Remote module receive 12 VDC, 160 mA via the CAT5 cables
from the Broadcaster or Line Splitter.
The figure below illustrates the ExpandView™ CAT5 configuration with the
ExpandView™ CAT5 Control Unit and the optional remote computers.
The Dual Remote module has no VGA input and is therefore not suitable
for CBT applications.
Control
Unit
Broadcaster Module
CAT5 cables
to Remotes or
Line Splitters
Video cable
Broadcaster
Computer
Video cable
CAT5 cables
to Remotes or
Line Splitters
Level 1
Remote
Computer
Remote
module
Line
Splitter
Video cable
Remote
Computer
Remote
module
CAT5 cables
to Remotes
Level 2
Line
Splitter
Video cable
CAT5 cables
to Remotes
Remote
Computer
Remote
module
6
7
CONFIGURATION
CONFIGURATION
8. ExpandView™ CAT5 detailed connections
9. The ExpandView™ CAT5 configuration without remote computers
The figure below illustrates the detailed connections of the ExpandView™ CAT5.
The figure below illustrates the ExpandView™ CAT5 configuration without
optional computers connected to the Remote modules and the Dual Remote
module. Connect the Broadcaster and Line Splitters as in figure 1.
Figure 2 illustrates the detailed connections of the Remote module.
Remote Module
Control
Unit
Control
Unit
CAT5 cables
to Remotes or
Line Splitters
CAT5 cables
to Remotes or
Line Splitters
CAT5 cables to Broadcaster
or Line Splitters
Remote
module
Broadcaster Module
Video cable
Broadcaster
Module
Broadcaster
Computer
Figure 2
Dual Remote Module
CAT5 cables
to Remotes or
Line Splitters
CAT5 cables
to Remotes or
Line Splitters
Video cable
Broadcaster
Computer
CAT5 cables
to Remotes or
Line Splitters
Line
Splitter
Remote
module
Line
Splitter
Video cable
CAT5 cables
to Remotes or
Line Splitters
Instead of the Remote module,
use the Dual Remote Module
to connect 2 screens to the
Broadcaster or Line Splitter
via CAT5 cable. The 2 screens
display the images broadcast
by the Broadcaster computer.
CAT5 cables to
Broadcaster or
Line Splitters
Remote
module
Remote
Computer
Dual
Remote
module
CAT5 cables
to Remotes
Dual
Remote
module
CAT5 cables
to Remotes
Line
Splitter
Line
Splitter
CAT5 cables
to Remotes
Figure 1
8
Remote
module
Figure 3
9
CONFIGURATION
TECHNICAL SPECIFICATIONS
10. Operating the ExpandView™ CAT5
SYSTEM
Once connected, the ExpandView CAT5 broadcasts to all remote monitors.
™
The Control Unit
The Control Unit is illustrated below
To Broadcaster’s
Control port
With the ExpandView™ CAT5 Control Unit carry out the following functions:
Master to all
Press the Master to all button to send the broadcaster’s screen
to all remote monitors. The LED above the button lights up.
Press the button again to release the remote monitors.
Dark all
Press the Dark all button to darken all remote screens.
The LED above the button lights up.
Press the button again to release the remote screens.
Resolution
Up to 1600x1200 @ 75 Hz
System cable
CAT5 UTP or FTP 2x4x24
AWG Solid Wire Conductor cable
Max distance
110m/360ft
Input/Output Video Signals
Analog signal red, green, blue 0.7v p-p 75 Ohm
Sync.
TTL compatible
Horizontal/Vertical Sync. Polarity
Positive/Negative
Operating temperature
0ºC to 40ºC/32ºF to 104ºF
Storage temperature
-40ºC to 70ºC/-40ºC to 158ºF
Humidity
80% non condensing relative humidity
Warranty
3 Years
Cables & Connectors
BROADCASTER
MODULE
LINE SPLITTER
REMOTE MODULE
VGA In - HDD15M
System In - RJ45
System In - RJ45
VGA Out - HDD15F
System Out - RJ45
CPU VGA - HDD15M
System Out - 8 Ports
RJ45
Screen - HDD15F
Control - MiniDin8F
Dimensions
175 x 96 x 42mm/
0.57 x 0.38 x 0.14ft
118 x 96 x 42mm/
0.39 x 0.38 x 0.14ft
78 x 62 x 23mm/ 0.31
x 0.26 x 0.07ft
Power supply
External Power
Adapter 12VDC 2A
External Power
Adapter 12VDC 2A
From previous unit
through CAT5 cable
DUAL REMOTE MODULE
11. Adjusting the picture quality
Cables
& Connectors
Use a small screwdriver to turn the Picture adjuster on the Remote module to
adjust the picture quality.
10
System In - RJ45
Screen x 2 - HDD15F
Power
supply
From previous unit
through CAT5 cable
11
ExpandView™ CAT5
Belkin Ltd.
Express Business Park
Shipton Way, Rushden
NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
Belkin SAS
130 rue de Silly
92100 Boulogne-Billancourt
France
+33 (0) 1 41 03 14 40
+33 (0) 1 41 31 01 72 fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk
The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin Nordic
Knarrarnäsgatan 7
164 40 Kista
Sweden
+46 (0) 8 5229 1870
+46 (0) 8 5229 1874 fax
Belkin GmbH
Hanebergstraße 2
80637 Munich
Germany
+49 (0) 89 143405 0
+49 (0) 89 143405 100 fax
Belkin Iberia
Avda. Cerro del Aguila 3
28700 San Sebastián de los Reyes
Spain
+34 (0) 9 16 25 80 00
+34 (0) 9 02 02 00 34 fax
Belkin Tech Support
Europe: 00 800 223 55 460
© 2005 Belkin Corporation. All rights reserved. All trade names
are registered trademarks of respective manufacturers listed.
P75110ea
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising