Catalog 744
March 2015 / CATALOG 744
CO2 Innovations
Energy Conscious Products & Solutions for Supermarkets
⚠WARNING – USER RESPONSIBILITY
Failure or improper selection or improper use of the products described herein or related items can cause death, personal injury and property damage.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further
investigation by users having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance,
endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable
industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its
subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the
user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the
components or systems.
For safety information see the Safety Guide at www.parker.com/safety or call 1-800-CParker.
OFFER OF SALE
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its
acceptance are governed by the provisions stated in the detailed “Offer of Sale” elsewhere in this document or available at www.parker.com.
FOR USE ON AIR CONDITIONING AND REFRIGERATION SYSTEMS ONLY
Catalog 744, March 2015 supersedes Catalog 744, January 2010 and all prior publications.
CATALOG 744 — Page 1
CO2 Innovations
ENERGY CONSCIOUS PRODUCTS and
SOLUTIONS FOR SUPERMARKETS
As a world leader in refrigerant flow controls, Sporlan Division of Parker
Hannifin continues to meet the challenges of the future. Our growing
line of products for CO2 set new standards for robust design and
advanced technology.
This condensed catalog contains product information specifically for CO2
applications. By including a minimum of engineering information we are
able to provide a concise reference to pertinent data and specifications
on Sporlan CO2 products.
For additional engineering information, a complete Sporlan Catalog or
CD, please contact your nearest Sporlan Sales Office, Authorized Sporlan
Wholesaler or log on to www.sporlanonline.com.
CONTENTS
Page
For further information on
the products featured in
this catalog, see Bulletin
number listed below.
Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2250-10
Catch-All® Liquid & Suction Line Filter-Drier . . . . . . . . . . . . . . . . . . . . . . . . . . . 1340-10
Distributors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
20-10
Electric Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
100-20, 100-40, 100-80
Electronic Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
100-50-2, 100-50-5
Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Form 40-382
Pressure-Temperature Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Form 10-135
Offer of Sale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Oil Level Control System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
110-10, 110-11
See•All® Moisture & Liquid Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
70-10
Solenoid Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
30-10
Suction Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
80-10
Terms of Sale With Warranty Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Page 2 — CATALOG 744
CO2
SUBCRITICAL CO2
R-744 CASCADE SYSTEM SCHEMATIC
Conventional System
Low Side Stage
Brazed Plate
Heat Exchange
CO2 Condenser
Oil Differential
Pressure Valve
Oil
Reservoir
Oil
Separator
Check
Valve
Replaceable
Catch-All
Receiver
Oil Filter
SASee•All
Liquid Header
Evaporators
SER-C
RSFReplaceable
Suction Filter
CDS-7
Step Motor Evaporator
Control Valve
Liquid Line
Solenoid Valve
Oil Level
Control
SERI
Suction Header
CDS-9
Step Motor Evaporator
Control Valve
Liquid Line
Solenoid Valve
R-744 SECONDARY SYSTEM SCHEMATIC*
Conventional
System
Low Side Stage
Brazed Plate
Heat Exchange
CO2 Condenser
Check
Valve
Receiver
Replaceable
Catch-All
Pump
SASee•All
Supply Header
Evaporators
Liquid
Solenoid Valve
Liquid
Solenoid Valve
Return Header
* For Solenoid Valves for Secondary Coolant CO2 Systems, please refer to Bulletin 30-10-10, or contact Sporlan Division of Parker.
Note: No pressure relief or ball valves are shown. Relief valves must be present where liquid CO2 can be trapped.
All components must be properly pressure rated and protected for safe installation.
CATALOG 744 — Page 3
CO2
DISTRIBUTORS
All Sporlan distributors are ready for service with CO2. The following tables are provided for making selections based on procedure
explained in Bulletin 20-10.
1126
1651
QUICK REFERENCE
CONNECTION SIZE
Inches
TYPICAL EEV
TYPES
1/2 ODM
SER-AA, A, B, C, DS
5/8 ODM
SER-AA, A, B, C, DS
SERI-F, G
7/8 ODM
SER-DS
SERI-F, G(S), J(S)
1-1/8 ODM
SER-DS
SERI-F, G(S), J(S), K(S), L(S)
1-3/8 ODM
SERI-G(S), J(S), K(S), L(S)
DISTRIBUTOR
TYPE
1613
1616
D260
D262
1620
1622
1651(R)
1112
1113
1653(R)
1115
1116
1655 (R)
1117
1126
1128
1657(R)
MAXIMUM NUMBER OF CIRCUITS
3/16
1/4
5/16
3/8
6
4
–
–
8
6
4
–
6
4
–
–
9
6
4
–
6
4
–
–
9
7
4
–
7
5
–
–
7
6
4
2
12
8
6
4
12
9
6
4
15
10
9
6
20
15
–
–
20
12
10
7
18
15
9
7
24
18
15
12
28
25
21
16
26
18
14
11
NOZZLE
TYPE
PERM.
PERM.
L
L
J
J
J (R)
G
G
G (R)
E
E
E (R)
C
C
C
C (R)
SIDE
MATERIAL
CONNECTION
–
–
–
–
–
–
3/8 or 1/2 ODF
#360 BRASS
–
–
3/8 or 1/2 ODF
–
–
1/2 or 5/8 ODF
–
–
#377 BRASS
–
5/8 or 7/8 ODF #360 BRASS
DIMENSIONS
A
A
D
C
B
B
C
D
SPECIFICATIONS
NUMBER OF
CIRCUITS &
TUBING SIZES
AVAILABLE
Type D260
2 to 6
2 to 4
Type D262
2 to 7
2 to 6
2 to 4
Inches
1/9 thru 8
L
mm
A
B
C
D
A
B
C
D
1/2 ODM
Solder
1.96
0.81
.497
.503
0.82
49.8
21
12.6
12.8
21
1/9 thru 8
L
1/2 ODM
Solder
2.44
1.00
.497
.503
0.81
62.0
25.4
12.6
12.8
21
1/2 thru 5
PERM.
1.17
0.81
.498
.500
0.50
29.7
21
12.6
12.7
13
1/2 ODM
Solder
1.55
1.00
.498
.500
0.50
39.4
25.4
12.6
12.7
13
5/8 ODM
Solder
1.14
0.81
.623
.625
0.69
29.0
21
15.8
15.9
18
1/2 ODM
Solder
Net Weight - Approximately - Approximately 3 oz. (80 g)
5/32”
3/16”
1/4”
5/16”
Type 1620
2 to 6
2 to 4
DIMENSIONS
DISTRIBUTOR
Net Weight - Approximately - Approximately 2 oz. (60 g)
5/32”
3/16”
1/4”
Type 1616
8 to 10
7 to 8
5 to 6
2 to 4
INLET
CONNECTION
Inches
Net Weight - Approximately 3 oz. (80 g)
3/16”
1/4”
5/16”
Type 1613
NOZZLE &
RETAINER
RING SIZE
Net Weight - Approximately 2 oz. (60 g)
3/16”
1/4”
7 to 9
5 to 6
2 to 4
NOZZLE
ORIFICE
NUMBERS
AVAILABLE
1/2 thru 5
PERM.
Net Weight - Approximately 2 oz. (60 g)
3/16”
1/4”
1/9 thru 8
J
Page 4 — CATALOG 744
CO2
DISTRIBUTORS
SPECIFICATIONS
NUMBER OF
CIRCUITS &
TUBING SIZES
AVAILABLE
Type 1622
7 to 9
5 to 7
2 to 4
Type 1112
5 to 7
4 to 6
2 to 4
2
Type 1113
8 to 12
7 to 8
5 to 6
3 to 4
Type 1115
11 to 15
9 to 10
7 to 9
5 to 6
Type 1116
16 to 20
NOZZLE
ORIFICE
NUMBERS
AVAILABLE
NOZZLE &
RETAINER
RING SIZE
1/9 thru 8
1/6 thru 20
Type 1128
B
C
D
A
B
C
D
5/8 ODM
Solder
1.63
1.00
.623
.625
0.63
41.4
25.4
15.8
15.9
16
7/8 ODM
Solder
1.72
0.91
.873
.875
1.00
43.7
23
22.2
+/–
0.03
25.4
7/8 ODM
Solder
1.78
1.16
.873
.875
0.88
45.2
29.5
22.2
+/–
0.03
22
1-1/8 ODM
Solder
2.44
1.50
1.123
1.125
1.12
62.0
38.1
28.52
28.58
28.4
1-1/8 ODM
Solder
2.44
1.75
1.123
1.125
1.12
62.0
44.4
28.52
28.58
28.4
1-3/8 ODM
Solder
2.56
1.75
1.373
1.375
1.31
65.0
44.4
34.87
34.92
33.3
2.81
2.38
1.373
1.375
1.12
71.4
60.5
34.87
34.92
28.4
3.12
3.00
1.373
1.375
1.38
79.2
76.2
34.87
34.92
35.1
G
Net Weight - Approximately 5 oz. (140 g)
3/16”
1/4”
5/16”
3/8”
1/6 thru 20
G
Net Weight - Approximately 9 oz. (250 g)
3/16”
1/4”
5/16”
3/8”
2 thru 30
E
Net Weight - Approximately 9 oz. (250 g)
3/16”
2 thru 30
E
1/4”
25 to 28
19 to 25
16 to 21
13 to 16
mm
Net Weight - Approximately 4 oz. (110 g)
3/16”
1/4”
5/16”
3/8”
Net Weight - Approximately 1 lb. (450 g)
19 to 24
15 to 18
10 to 15
8 to 12
Inches
A
J
11 to 15
Type 1126
DIMENSIONS
DISTRIBUTOR
Net Weight - Approximately 3 oz. (80 g)
3/16”
1/4”
5/16”
Type 1117
16 to 18
11 to 15
9
7
INLET
CONNECTION
Inches
3/16”
1/4”
5/16”
3/8”
3 thru 50
C
Net Weight - Approximately 1 lb., 6 oz. (620 g)
3/16”
1/4”
5/16”
3/8”
3 thru 50
C
1-3/8 ODM
Solder
Net Weight - Approximately 1 lb., 10 oz. (740 g)
3/16”
1/4”
5/16”
3/8”
3 thru 50
C
1-3/8 ODM
Solder
CATALOG 744 — Page 5
CO2
DISTRIBUTORS
CAPACITIES
0°
0.42
0.64
1.03
1.35
1.87
2.82
3.77
5.48
7.53
9.39
11.3
15.1
18.6
22.3
26.9
30.1
37.2
46.1
51.6
62.2
78.2
89.3
107
120
156
1/9
1/6
1/4
1/3
1/2
3/4
1
1-1/2
2
2-1/2
3
4
5
6
8
10
12
15
17
20
25
30
35
40
50
12
18
1.36
1.16
■
■
-20°
0.30
0.46
0.74
0.97
1.34
2.02
2.71
3.94
5.40
6.74
8.09
10.8
13.3
16.0
19.3
21.6
26.7
33.1
37.0
44.6
56.1
64.1
77.1
86.5
112
LIQUID TEMPERATURE °F
10 °
20 °
30 °
CORRECTION FACTOR FOR NOZZLE AND TUBES
1.25
1.00
0.83
TUBE LENGTH (Inches)
30
36
42
48
54
60
CORRECTION FACTOR, TUBE LENGTH
1.07 1.00 0.95 0.90 0.86 0.82 0.79
24
Nozzle ratings based on ∆P = 35 psi (2.4 bar)
Tube ratings based on ∆P = 10 psi (0.69 bar), 30 inches (760 mm) length
■
NOZZLE
NUMBER
-40°
0.23
0.35
0.56
0.73
1.01
1.53
2.05
2.98
4.09
5.09
6.11
8.18
10.1
12.1
14.6
16.3
20.2
25.0
28.0
33.7
42.4
48.5
58.3
65.4
84.8
-20°
1.27
1.96
3.15
4.13
5.71
8.62
11.5
16.8
23.0
28.7
34.5
46.2
56.9
68.3
82.2
92.2
114
141
158
190
239
273
329
369
478
1/9
1/6
1/4
1/3
1/2
3/4
1
1-1/2
2
2-1/2
3
4
5
6
8
10
12
15
17
20
25
30
35
40
50
DISTRIBUTOR CAPACITY PER TUBE (Tons)
EVAPORATOR TEMPERATURE °F
0°
-20°
-40°
1.31
0.84
0.60
3.80
2.44
1.73
7.73
4.97
3.54
14.0
8.99
6.40
TUBE
DIAMETER
Inches
3/16
1/4
5/16
3/8
1.60
■
DISTRIBUTOR NOZZLE CAPACITIES
EVAPORATOR TEMPERATURE °F
NOZZLE
NUMBER
0°
Tons psi °FkW bar °C
-20 °
0.71
1.87
-40°
0.76
1.17
1.88
2.46
3.41
5.14
6.88
10.0
13.7
17.1
20.6
27.5
34.0
40.7
49.1
55.0
67.9
84.2
94.2
113
143
163
196
220
285
DISTRIBUTOR CAPACITY PER TUBE (kW)
EVAPORATOR TEMPERATURE °C
-20°
-30°
-40°
3.86
2.71
2.02
11.2
7.86
5.86
22.8
16.0
11.9
41.2
29.0
21.6
TUBE
DIAMETER
Inches
3/16
1/4
5/16
3/8
40 °
DISTRIBUTOR NOZZLE CAPACITIES
EVAPORATOR TEMPERATURE °C
-30°
0.97
1.49
2.4
3.14
4.34
6.55
8.77
12.8
17.5
21.8
26.2
35.1
43.3
51.9
62.5
70.0
86.5
107
120
145
182
208
250
280
364
LIQUID TEMPERATURE °C
-15 °
-10 °
-5 °
0°
CORRECTION FACTOR FOR NOZZLE AND TUBES
1.48
1.19
1.00
0.86
66
72
300
450
0.76
0.73
1.36
1.16
TUBE LENGTH (mm)
760
900 1050 1200 1350 1500
CORRECTION FACTOR, TUBE LENGTH
1.07 1.00 0.95 0.90 0.86 0.82 0.79
600
5°
0.75
1650
1800
0.76
0.73
Page 6 — CATALOG 744
CO2
SOLENOID VALVES
SELECTION - CAPACITY RATING
■  Capacity, MOPD and Electrical specifications are required.
All solenoid valves are tested and rated in accordance with A.R.I. Standard No. 760-2001.
LIQUID CAPACITY SELECTION TABLE
Tons psi °F
■
■
TYPE NUMBER
“E” Series Extended Connections
Without Manual Lift Stem
With Manual Lift Stem
Normally Closed
Normally Closed
E2S120-HP
–
E5S130-HP
–
E6S130-HP
ME6S130-HP
E6S140-HP
ME6S140-HP
E8S140-HP
ME8S140-HP
E9S240-HP
ME9S240-HP
E9S250-HP
–
E10S140-HP
ME10S140-HP
E10S150-HP
ME10S150-HP
E14S250-HP
ME14S250-HP
E19S270-HP
ME19S270-HP
E25S270-HP
–
E25S290-HP
ME25S290-HP
–
ME35S190-HP
–
ME35S1110-HP
CONNECTIONS
ODF SOLDER
Inches
1/4
3/8
3/8
1/2
1/2
1/2
5/8
1/2
5/8
5/8
7/8
7/8
1-1/8
1-1/8
1-3/8
PORT
SIZE
Inches
Cv
TONS OF REFRIGERATION
0.15
0.53
0.075
0.150
1
0.66
2.34
0.93
3/16
4.20
PRESSURE DROP — psi*
2
3
4
0.95
1.16
1.34
3.33
4.09
4.73
5
1.51
5.30
5.90
7.21
8.30
9.26
1.20
1/4
5.38
7.60
9.31
10.75
12.02
1.53
9/32
6.84
9.64
11.8
13.6
15.2
2.06
5/16
9.11
12.9
15.9
18.4
20.6
2.98
4.57
7/16
19/32
13.3
20.3
18.8
28.8
23.0
35.3
26.5
40.8
29.6
45.6
7.81
25/32
34.7
49.1
60.2
69.6
77.9
13.3
1
56.3
82.2
103
120
136
Kv
PORT
SIZE
mm
Ratings based on 20°F liquid, -20°F evaporator temperature.
kW bar °C
■
■
TYPE NUMBER
“E” Series Extended Connections
Without Manual Lift Stem
With Manual Lift Stem
Normally Closed
Normally Closed
E2S120-HP
–
E5S130-HP
–
E6S130-HP
ME6S130-HP
E6S140-HP
ME6S140-HP
E8S140-HP
ME8S140-HP
E9S240-HP
ME9S240-HP
E9S250-HP
–
E10S140-HP
ME10S140-HP
E10S150-HP
ME10S150-HP
E14S250-HP
ME14S250-HP
E19S270-HP
ME19S270-HP
E25S270-HP
–
E25S290-HP
ME25S290-HP
E35S190-HP
ME35S190-HP
–
ME35S1110-HP
CONNECTIONS
ODF SOLDER
Inches
1/4
3/8
3/8
1/2
1/2
1/2
5/8
1/2
5/8
5/8
7/8
7/8
1-1/8
1-1/8
1-3/8
kW OF REFRIGERATION
PRESSURE DROP — bar*
0.1
0.2
0.3
2.76
3.93
4.84
9.73
13.9
17.0
0.4
5.60
19.7
0.13
0.46
1.9
3.8
0.07
2.31
8.12
0.81
4.8
14.6
17.4
24.4
29.8
34.3
1.02
6.4
18.9
22.7
32.2
39.2
45.5
1.32
7.1
23.7
28.3
39.9
48.8
56.3
1.76
7.9
32.0
38.6
54.6
67.0
77.0
2.57
3.95
11
15
46.1
70.4
55.1
84.3
77.8
119
95.2
147
110
169
6.75
20
120
144
204
250
289
11.5
26
196
238
347
433
506
Ratings based on -5°C liquid, -30°C evaporator temperature.
* Do not use below 1 psi (0.07 bar) pressure drop.
For other liquid line temperatures use liquid correction factors below. Maximum Operating Pressure Differential (MOPD) for the AC coil is 450 psi (31.0 bar). Maximum Rated
Pressure (MRP) = 700 psig (48.3 barg).
0°
1.13
LIQUID TEMPERATURE °F
10°
20°
30°
CORRECTION FACTOR, LIQUID CAPACITY RATING
1.07
1.00
0.93
40°
-20°
0.86
1.18
LIQUID TEMPERATURE °C
-15°
-10°
-5°
0°
CORRECTION FACTOR, LIQUID CAPACITY RATING
1.12
1.06
1.00
0.94
5°
0.87
These factors include corrections for liquid refrigerant density and net refrigerating effect and are based on an average evaporator temperature of 40°F (5°C). For each 10°F (10°C)
reduction in evaporating temperature, capacities are reduced by approximately 1-1/2%.
The capacity tables above are based on Subcritical CO2 DX systems.
For Secondary Coolant CO2 applications and capacities, please refer to Bulletin 30-10-10, or contact Sporlan Division of Parker.
Disclaimer: Some CO2 systems do not use oil or lubrication in their systems. If so, the lack of lubrication in the system may cause
the internal components of the valve to wear prematurely resulting in eventual failure of the valve. This disclaimer is for solenoid
valves only.
CATALOG 744 — Page 7
CO2
SOLENOID VALVES
SUCTION CAPACITY SELECTION TABLE
Tons psi °F
■
kW bar °C
■
TYPE NUMBER
“E” Series Extended Connections
Without Manual With Manual
Lift Stem
Lift Stem
Normally Closed Normally Closed
E2S120-HP
–
E5S130-HP
–
E6S130-HP
ME6S130-HP
E6S140-HP
ME6S140-HP
E8S140-HP
ME8S140-HP
E9S240-HP
ME9S240-HP
E9S250-HP
–
E10S140-HP
ME10S140-HP
E10S150-HP
ME10S150-HP
E14S250-HP
ME14S250-HP
E19S270-HP
ME19S270-HP
E25S270-HP
–
E25S290-HP
ME25S290-HP
–
ME35S190-HP
–
ME35S1110-HP
■
SUCTION CAPACITY
RATINGS – Tons
EVAPORATOR TEMPERATURE °F
0°
0.15
0.52
-10°
0.13
0.47
-20°
0.12
0.43
-30°
0.11
0.39
-40°
0.10
0.35
0.98
0.90
0.82
0.75
0.68
1.27
1.14
1.02
0.92
0.82
1.57
1.45
1.32
1.20
1.09
2.12
1.90
1.70
1.52
1.35
3.04
4.55
2.79
4.18
2.55
3.81
2.32
3.46
2.10
3.13
7.81
7.17
6.55
5.95
5.38
11.2
10.2
9.23
8.32
7.45
■
TYPE NUMBER
“E” Series Extended Connections
Without Manual With Manual
Lift Stem
Lift Stem
Normally Closed Normally Closed
E2S120-HP
–
E5S130-HP
–
E6S130-HP
ME6S130-HP
E6S140-HP
ME6S140-HP
E8S140-HP
ME8S140-HP
E9S240-HP
ME9S240-HP
E9S250-HP
–
E10S140-HP
ME10S140-HP
E10S150-HP
ME10S150-HP
E14S250-HP
ME14S250-HP
E19S270-HP
ME19S270-HP
E25S270-HP
–
E25S290-HP
ME25S290-HP
–
ME35S190-HP
–
ME35S1110-HP
SUCTION CAPACITY
RATINGS – kW
EVAPORATOR TEMPERATURE °C
-20°
0.52
1.83
-25°
0.46
1.65
-30°
0.42
1.51
-35°
0.38
1.37
-40°
0.35
1.23
3.45
3.16
2.88
2.64
2.39
4.46
4.00
3.59
3.23
2.88
5.52
5.10
4.64
4.22
3.83
7.46
6.68
5.98
5.34
4.75
10.7
16.0
9.81
14.7
8.97
13.4
8.16
12.2
7.39
11.0
27.5
25.2
23.0
20.9
18.9
39.4
35.9
32.5
29.3
26.2
Ratings based on 20°F (-5°C) liquid, 25°F (14°C) superheat, 1 psi (0.07 bar) ∆P.
DISCHARGE GAS CAPACITY SELECTION TABLE
Tons psi °F
■
kW bar °C
■
TYPE NUMBER
“E” Series Extended Connections
Without Manual With Manual
Lift Stem
Lift Stem
Normally Closed Normally Closed
E2S120-HP
–
E5S130-HP
–
E6S130-HP
ME6S130-HP
E6S140-HP
ME6S140-HP
E8S140-HP
ME8S140-HP
E9S240-HP
ME9S240-HP
E9S250-HP
–
E10S140-HP
ME10S140-HP
E10S150-HP
ME10S150-HP
E14S250-HP
ME14S250-HP
E19S270-HP
ME19S270-HP
E25S270-HP
–
E25S290-HP
ME25S290-HP
–
ME35S190-HP
–
ME35S1110-HP
■
DISCHARGE CAPACITY
RATINGS – Tons
∆P - psi
2
0.21
0.75
5
0.34
1.20
10
0.48
1.70
25
0.77
2.72
50
1.25
4.39
1.40
2.20
3.09
4.85
7.46
1.81
2.89
4.05
6.41
8.78
2.26
3.57
5.03
7.91
11.1
2.90
4.63
6.60
10.5
15.5
4.38
6.59
6.91
10.5
9.76
14.8
15.4
23.5
23.2
34.5
11.3
17.9
25.4
40.0
55.0
16.7
27.5
40.1
66.2
96.5
■
TYPE NUMBER
“E” Series Extended Connections
Without Manual With Manual
Lift Stem
Lift Stem
Normally Closed Normally Closed
E2S120-HP
–
E5S130-HP
–
E6S130-HP
ME6S130-HP
E6S140-HP
ME6S140-HP
E8S140-HP
ME8S140-HP
E9S240-HP
ME9S240-HP
E9S250-HP
–
E10S140-HP
ME10S140-HP
E10S150-HP
ME10S150-HP
E14S250-HP
ME14S250-HP
E19S270-HP
ME19S270-HP
E25S270-HP
–
E25S290-HP
ME25S290-HP
–
ME35S190-HP
–
ME35S1110-HP
DISCHARGE CAPACITY
RATINGS – kW
∆P - bar
0.15
0.78
2.75
0.3
1.11
3.91
0.7
1.71
6.02
1.5
2.52
8.87
4.0
4.67
16.45
5.11
7.19
10.9
15.9
27.9
6.61
9.36
14.2
20.9
32.8
8.27
11.7
17.7
25.9
41.6
10.6
15.2
23.4
34.5
58.1
16.0
24.1
22.6
34.2
34.5
52.4
50.3
76.9
87.2
129
41.3
58.5
89.6
131
206
61.3
89.4
142
215
363
Ratings based on 20°F (-5°C) condensing, isentropic compression plus 50°F (28°C), -20°F (-30°C) evaporator, 5°F (-15°C) suction gas at the compressor.
LIQUID TEMPERATURE °F
0°
10°
20°
30°
40°
CORRECTION FACTOR, SUCTION AND DISCHARGE RATING
1.07
1.04
1.00
0.96
0.92
-20°
1.10
LIQUID TEMPERATURE °C
-15°
-10°
-5°
0°
5°
CORRECTION FACTOR, SUCTION AND DISCHARGE RATING
1.07
1.03
1.00
0.97
0.93
Page 8 — CATALOG 744
CO2
SOLENOID VALVES
TYPE E2 and E5 SERIES
Ordering Instructions
The E2 and E5 Series are hermetic solenoid valves with pilot operated disc construction. These valves may be mounted horizontally,
on their side or in a vertical line.
When ordering complete valves,
specify Valve Type, Connections,
Voltage and Cycles. When ordering
Body Assembly, specify Valve Type
Type E5S130-HP
and Connections. When ordering Coil
Assembly ONLY, specify Coil Type, Voltage and Cycles. Example:
MKC-1 120/50-60.
The E2 and E5 series solenoid valves feature extended solder type
connections as standard. One important benefit to the user is that all
valves in the “E2 and E5” series can be installed using either low or
no silver content brazing alloy.
The MKC-l coil is Class “F” temperature rated and is provided as
standard, therefore a high temperature coil is not required for discharge service.
For Secondary Coolant CO2 applications, please refer to Bulletin
30-10-10, or contact Sporlan Division of Parker.
VALVE
SERIES
A
TYPE
B
C
D
E
FITTING
DEPTH
OFFSET
DIMENSIONS
ODF
1.56”
40 mm Coil Removal
2.92”
74 mm
Approved
Inches
E2
E2S120-HP
4.63
0.55
1.96
E5
E5S130-HP
4.56
0.53
2.48
E2
E2S120-HP
118
14
50
E5
E5S130-HP
116
13
63
0.31
C
0.29
E2 and E5
Series
0.23
mm
D
7.4
8
B
6
E
A
COIL RATINGS
STANDARD
VOLTS/CYCLES
24/50-60
120/50-60
208-240/50-60
120-208-240/50-60
WATTS
AC
DC
10
15
SPECIFICATIONS - MKC-1 COIL
■
E2S120-HP
1/4
0.15
0.075
E5
E5S130-HP
3/8
0.53
0.150
MOPD
psi
AC
DC
450 400
■
NOMINAL LIQUID
CAPACITIES
TONS of
REFRIGERATION
CONNECTIONS
ODF - Inches
E2
TYPE
PORT SIZE
Inches
Cv
VALVE
SERIES
■
kW bar °C
■
CONNECTIONS
ODF - Inches
■
Kv
E2
E2S120-HP
1/4
0.13
1.9
E5
E5S130-HP
3/8
0.46
3.8
VALVE
SERIES
TYPE
PRESSURE DROP
3 psi
1.16
4.09
Capacities based on 20°F (-6.7°C) liquid temperature, -20°F (-29°C) evapora-
tor temperature. For other liquid line temperatures use liquid correction factors
below. Maximum Operating Pressure Differential (MOPD) for the AC coil is 450
psi (31 bar). Maximum Rated Pressure (MRP) = 700 psig (48.3 barg).
■
PORT SIZE
mm
Tons psi °F
MOPD
bar
AC
DC
NOMINAL LIQUID
CAPACITIES
kW of
REFRIGERATION
PRESSURE DROP
0.2 bar
31.0 27.6
3.93
13.9
Dual voltage 4-wire coils, 120-208-240/50-60 are available at slight additional cost.
For other voltages and cycles, consult Sporlan Division of Parker, Washington, MO.
Available with conduit boss, junction box, or DIN at no extra charge.
For capacity at other pressure drops, see page 6 and 7.
■ See disclaimer on page 6.
■
■
CATALOG 744 — Page 9
CO2
SOLENOID VALVES
TYPE E6, E8 and E10 SERIES
The E6, E8 and E10 Series are compact solenoid valves with pilot
operated disc construction for refrigeration and air conditioning.
These valves may be mounted horizontally, on their side or in a
vertical line. They are suitable for suction line service because very
low pressure differential, 1 psi, is required for full operation.
The MKC-l coil is Class “F” temperature rated and is provided as
standard, therefore a high temperature coil is not required for discharge
service.
The Type E6, E8 and E10 series solenoid valves feature extended
solder type connections as standard. One important benefit to the user
is that all valves in the “E6, E8 and E10” series can be installed without disassembly using either low or no silver content brazing alloy.
Ordering Instructions
When ordering complete valves, specify Valve Type, Connections,
Voltage and Cycles. When ordering Body Assembly, specify Valve
Type and Connections. When ordering Coil Assembly ONLY, specify
Coil Type, Voltage and Cycles. Example: MKC-1 120/50-60.
DIMENSIONS
TYPE
A
B*
C
D
E
FITTING
DEPTH
ODF
Approved
C
E6 and E8
Series
Inches
E6S130-HP
E6S140-HP
E8S140-HP
E10S140-HP
E10S150-HP
E6
E8
E10
2.92”
74 mm
1.56”
40 mm Coil Removal
OFFSET
VALVE
SERIES
4.66
0.31
0.73
2.59
0.31
5.00
0.38
0.86
6.49
2.52
0.39
0.50
*B
E
mm
E6S130-HP
E6S140-HP
E8S140-HP
E10S140-HP
E10S150-HP
E6
E8
E10
Type E6S130-HP
118
7.9
19
66
7.9
127
1.56”
40 mm Coil Removal
9.7
22
165
64
D
A
10
13
Approved
* Add 1.12” (28 mm) for valves with Manual Lift Stem.
C
1.64”
42 mm
COIL RATINGS
E10 Series
D
WATTS
STANDARD
VOLTS/CYCLES
24/50-60
120/50-60
208-240/50-60
120-208-240/50-60
AC
DC
10
15
B
E
A
Optional 1/2”
Conduit Boss
0.53”
13 mm
1.06”
27 mm
SPECIFICATIONS - MKC-1 COIL
E6
E8
E10
■
E6S130-HP
ME6S130-HP
ME6S140-HP
E8S140-HP
ME8S140-HP
E10S140-HP
E10S150-HP
3/8
1/2
1/2
1/2
5/8
NOMINAL LIQUID
CAPACITIES
TONS of
REFRIGERATION
PRESSURE DROP
3 psi
VALVE
SERIES
0.93 3/16 450 400
7.21
E6
1.2
9.31
E8
Cv
1/4
MOPD
psi
AC
DC
450 450
2.06 5/16 450 450
15.9
Capacities based on 20°F (-6.7°C) liquid temperature, -20°F (-29°C) evapora-
tor temperature. For other liquid line temperatures use liquid correction factors
below. Maximum Operating Pressure Differential (MOPD) for the AC coil is 450
psi (31 bar). Maximum Rated Pressure (MRP) = 700 psig (48.3 barg).
■ Dual voltage 4-wire coils, 120-208-240/50-60 are available at slight additional cost.
For other voltages and cycles, consult Sporlan Division of Parker, Washington, MO.
E10
■
TYPE
E6S130-HP
ME6S130-HP
ME6S140-HP
E8S140-HP
ME8S140-HP
E10S140-HP
E10S150-HP
3/8
Kv
PORT SIZE
mm
TYPE
■
PORT SIZE
Inches
VALVE
SERIES
kW bar °C
■
CONNECTIONS
ODF - Inches
■
CONNECTIONS
ODF - Inches
Tons psi °F
MOPD
bar
AC
DC
NOMINAL LIQUID
CAPACITIES
kW of
REFRIGERATION
PRESSURE DROP
0.2 bar
0.81
4.8
31.0 27.6
24.4
1/2
1.02
6.34 31.0 31.0
32.2
1/2
5/8
1.76
7.9
54.6
1/2
31.0 31.0
Available with conduit boss, junction box, or DIN at no extra charge.
■ For mounting holes and/or bracket information, see Bulletin 30-11
■ E6, E8 and E10 series with mounting holes are NOT standard.
■ For capacity at other pressure drops, see page 6 and 7.
■ See disclaimer on page 6.
■
Page 10 — CATALOG 744
CO2
SOLENOID VALVES
TYPES E9, E14, E19 and E25 SERIES
Types E9, E14, E19 and E25 Series are compact solenoid valves with
pilot operated disc construction for refrigeration and air conditioning. These valves may be mounted horizontally, on their side or
in a vertical line. These valves are also suitable for suction line service because very low pressure differential, 1 psi, is required for full
operation.
The MKC-2 and OMKC-2 coils are
Class “F” temperature rated and are
provided as standard, therefore a
high temperature coil is not required
for discharge service.
Type E14S250-HP
Ordering Instructions
The E9, E14, E19 and E25 series solenoid valves feature extended
solder type connections as standard. One important benefit to the user
is that all valves in the “E9, E14, E19 and E25 series” series can be
installed without disassembly using either low or no silver content
brazing alloy.
When ordering complete valves, specify Valve Type, Connections,
Voltage and Cycles. When ordering Body Assembly, specify Valve
Type and Connections. When ordering Coil Assembly ONLY, specify Coil Type, Voltage and Cycles. Example: MKC-2 120/50-60;
OMKC-2 120/50-60.
A
*B
ODF
Approved
C
Inches
E9
E9S230-HP
E9S240-HP
E9S250-HP
4.63
5.00
6.50
0.69
0.75
0.69
2.65
2.70
2.74
0.31
0.38
0.50
0.39
0.33
0.31
E14
E14S250-HP
6.88
0.46
3.26
0.50
–
E19
E19S270-HP
7.13
0.81
3.41
0.75
–
E25
E25S270-HP
E25S290-HP
7.50
8.50
0.72
0.72
3.81
3.81
0.75
0.91
–
–
E9S230-HP
E9S240-HP
E9S250-HP
118
127
165
18.0
9.7
12.7
67
69
69
7.9
9.7
13.0
9.9
7.9
9.7
3.17”
81 mm
1.75”
44 mm Coil Removal
E
OFFSET
TYPE
D
FITTING
DEPTH
VALVE
SERIES
C
NORMALLY
CLOSED
DIMENSIONS
*B
E9 Series
E
D
A
mm
E9
E14
E14S250-HP
175
11.7
83
13.0
–
E19
E19S270-HP
181
21.0
87
19.0
–
E25
E25S270-HP
E25S290-HP
191
216
18.0
18.0
97
97
19.0
23.0
–
–
1.89”
48 mm
COIL RATINGS
STANDARD
VOLTS/CYCLES
24/50-60
120/50-60
208-240/50-60
120-208-240/50-60
WATTS
AC
DC
15
18
Optional 1/2”
Conduit Boss
* Add 1.12” (28 mm) for valves with Manual Lift Stem.
SPECIFICATIONS - MKC-2 AND OMKC-2 COIL
E9
■
Cv
E9S230-HP
E9S240-HP
E9S250-HP
3/8
1/2
5/8
1.53 9/32
MOPD
psi
AC
DC
7/16 450 400
E14
E14S250-HP
5/8
2.98
E19
E19S270-HP
7/8
4.57 19/32
E25
E25S270-HP
E25S290-HP
7/8
1-1/8
7.81 25/32
■
NOMINAL LIQUID
CAPACITIES
TONS of
REFRIGERATION
VALVE
SERIES
TYPE
PRESSURE DROP
3 psi
Kv
PORT SIZE
mm
TYPE
■
PORT SIZE
Inches
VALVE
SERIES
kW bar °C
■
CONNECTIONS
ODF - Inches
■
CONNECTIONS
ODF - Inches
Tons psi °F
MOPD
bar
AC
DC
NOMINAL LIQUID
CAPACITIES
kW of
REFRIGERATION
PRESSURE DROP
0.2 bar
E9
E9S230-HP
E9S240-HP
E9S250-HP
3/8
11.8
1/2
5/8
1.32
23.0
E14
E14S250-HP
5/8
2.57
11
25.3
E19
E19S270-HP
7/8
3.95
15
119
E25
E25S270-HP
E25S290-HP
7/8
1-1/8
6.75
20
204
60.2
Capacities based on 20°F (-6.7°C) liquid temperature, -20°F (-29°C) evapora-
tor temperature. For other liquid line temperatures use liquid correction factors
below. Maximum Operating Pressure Differential (MOPD) for the AC coil is 450
psi (31 bar). Maximum Rated Pressure (MRP) = 700 psig (48.3 barg).
■
7.1
39.9
31.0 27.6
77.8
Dual voltage 4-wire coils, 120-208-240/50-60 are available at slight additional cost.
For other voltages and cycles, consult Sporlan Division of Parker, Washington, MO.
Available with conduit boss, junction box, or DIN at no extra charge.
■ For capacity at other pressure drops, see page 6 and 7.
■ See disclaimer on page 6.
■
CATALOG 744 — Page 11
CO2
SOLENOID VALVES
TYPES E35 SERIES
Ordering Instructions
Types E35 Series solenoid valves are pilot operated for refrigeration
and air conditioning applications. They are suitable for suction service because very low pressure differential, 1 psi, is required for full
operation. The E35 Series may be mounted horizontally, on their
side or in a vertical line.
When ordering complete valves,
specify Valve Type, Connections,
Voltage and Cycles. When ordering
Body Assembly, specify Valve Type
and Connections.
The Type E35 series solenoid valves feature extended solder type
connections as standard. One important benefit to the user is that all
valves in the “E35” series can be installed without disassembly using
either low or no silver content brazing alloy.
Type ME35S1110-HP
Q1-5/8” ODM Type L tubing may be slipped over 1-3/8” fitting,
without the use of a coupling.
When ordering Coil Assembly ONLY, specify Coil Type, Voltage and
Cycles. Example: MKC-1 120/50-60; OMKC-1 120/50-60.
The MKC-1 and OMKC-1 coils are Class “F” temperature rated and
are provided as standard, therefore a high temperature coil is not
required for discharge service.
1.56”
40 mm Coil Removal
DIMENSIONS
4.81
5.94
Listed
OFFSET
B
Approved
*E
FITTING
DEPTH
A
TYPE
NORMALLY
OPEN
VALVE
SERIES
D
NORMALLY
CLOSED
C
ODF
ME35 Series
C
Inches
E35
E35S190-HP
E35S1110-HP
10.06
11.06
5.03
5.53
E35S190-HP
E35S1110-HP
256
281
128
140
0.91
0.97
0.84
0.84
23
25
21
21
E
mm
D
E35
122
151
B
* Add 1.12” (28 mm) for valves with Manual Lift Stem.
24/50-60
120/50-60
208-240/50-60
120-208-240/50-60
B
A
1.64”
42 mm
COIL RATINGS
STANDARD
VOLTS/CYCLES
D
WATTS
AC
DC
10
15
Optional 1/2”
Conduit Boss
SPECIFICATIONS - MKC-1 AND OMKC-1 COIL
E35
■
Cv
1-1/8
ME35S190-HP
13.3
ME35S1110-HP Q1-3/8
1
MOPD
psi
■
NOMINAL LIQUID
CAPACITIES
TONS of
REFRIGERATION
AC DC
PRESSURE DROP
3 psi
450 400
103
Capacities based on 20°F (-6.7°C) liquid temperature, -20°F (-29°C) evapora-
tor temperature. For other liquid line temperatures use liquid correction factors
below. Maximum Operating Pressure Differential (MOPD) for the AC coil is 450
psi (31 bar). Maximum Rated Pressure (MRP) = 700 psig (48.3 barg).
VALVE
SERIES
E35
■
TYPE
Kv
1-1/8
ME35S190-HP
11.5
ME35S1110-HP Q1-3/8
PORT SIZE
mm
TYPE
■
PORT SIZE
Inches
VALVE
SERIES
kW bar °C
■
CONNECTIONS
ODF - Inches
■
CONNECTIONS
ODF - Inches
Tons psi °F
MOPD
bar
AC DC
NOMINAL LIQUID
CAPACITIES
kW of
REFRIGERATION
PRESSURE DROP
0.2 bar
26 31.0 27.6
347
Dual voltage 4-wire coils, 120-208-240/50-60 are available at slight additional cost.
For other voltages and cycles, consult Sporlan Division of Parker, Washington, MO.
Available with conduit boss, junction box, or DIN at no extra charge.
For capacity at other pressure drops, see page 6 and 7.
■ See disclaimer on page 6.
■
■
Page 12 — CATALOG 744
CO2
SOLENOID VALVES
IDENTIFICATION
NOMENCLATURE - E SERIES
M
E
10
S
2
5
0
S
Connection
Size in 1/8”
0 - ODF X ODF
1 - ODF X ODM
2 - ODM X ODF
3 - ODM X ODM
*Connections
Manual
Lift Stem
Design
Series
Port Size
in 1/32”
Connections
Solder
Coil Size
Q, W
Type “E” series is identified by an expanded nomenclature. The system of valve identity based on port size. In addition, the “E” series
identifies the connection size and type. The advantage of the “E”
series nomenclature system is that it allows ease in valve identification of the standard line and can provide considerable information
about special valves supplied to manufacturers.
Coil Connection
S- Spade
E - DIN 43650A
Q The MKC-1, OMKC-1, MKC-2 and OMKC-2 are fungus proof and meet MIL-I-631C.
W The standard MKC-1 and MKC-2 are class “F” rated.
* Standard connections are ODF inlet x ODF outlet
on ‘’E” Series valves. Minimum quantities may be
required for other connections.
For connections and other special features consult Sporlan Division
of Parker, Washington, MO.
APPLICATION
COMPRESSOR CAPACITY REDUCTION SERVICE
TRANSFORMER SELECTION FOR LOW-VOLTAGE
CONTROL SYSTEMS
Sporlan Solenoid Valves may be used in conjunction with Sporlan
Discharge Bypass Valves for capacity reduction service. For capacity information and further details on the Discharge Bypass Valves,
consult Sporlan Division of Parker, Washington, MO.
Many systems utilize low voltage controls, requiring the use of a
transformer for voltage reduction, normally to 24 volts. The selection of a transformer is not accomplished by merely selecting one that
has the proper voltage requirements. The volt-ampere (VA) rating is
equally important. To determine the VA requirement for a specific
solenoid valve, refer to the chart below. It should be noted, that insufficient transformer capacity will result in reduced operating power or
lowering of the MOPD value.
FILTER-DRIERS ARE ESSENTIAL
Dirt and other system contaminants present a problem for refrigeration and air conditioning controls. Since pilot operated solenoid
valves operate with rather close tolerances, system cleanliness is
imperative. The Sporlan Catch-All® Filter-Drier filters out minute
particles of dirt and other foreign matter, thus protecting the valve.
If more than one solenoid valve and/or other accessories are operated
from the same transformer, then the transformer VA rating must be
determined by adding the individual accessories’ VA requirements.
Sporlan recommends using a Catch-All® Filter-Drier ahead of every
solenoid valve on all refrigeration and air conditioning applications.
Contact Sporlan before adding a Catch-All® Filter-Drier in the discharge line.
COIL
KIT
■
■
■
FUSING
Sporlan Solenoid Valves are not supplied with fuses. Fusing should
be according to local codes. We recommend fusing the hot leg of the
valve wiring with fast acting fuses and the valve should be grounded
either through the fluid piping or the electrical conduit.
24 VOLTS/
50-60 CYCLES
120 VOLTS/
50-60 CYCLES
240 VOLTS/
50-60 CYCLES
TRANSFORMER RATING
VOLTS-AMPERES
CURRENT-AMPERES
CURRENT-AMPERES
CURRENT-AMPERES
INRUSH
HOLDING
INRUSH
HOLDING
INRUSH
HOLDING
FOR 100% OF RATED
MOPD OF VALVE
MKC-1
OMKC-1
1.9
0.63
0.39
0.14
0.19
0.09
60
MKC-2
OMKC-2
3.1
1.4
0.60
0.26
0.31
0.13
100
All current values are based on 60 cycles.
Volt-ampere ratings are based on inrush currents.
Above values are based on the most severe conditions. — Consult Sporlan Division of Parker, Washington, MO for coil characteristics on specific valve types.
CATALOG 744 — Page 13
FILTER-DRIERS
CO2
The universal acceptance of the Catch-All®
Filter-Drier is due to its unique molded
porous core, consisting of a blend of highly
effective desiccants. The quality features
built into it assure years of service on any
refrigeration system.
Foreign Matter – The Catch-All Filter-Drier will filter out scale,
solder particles, carbon, sludge, dirt or any other foreign matter with
negligible pressure drop. Fine particles that would go through an
ordinary strainer are removed down to a minimum size in one pass
filtration. The large filtering area of the Catch-All Filter-Drier core
permits it to collect a large amount of dirt without plug up.
Moisture – The Catch-All Filter-Drier removes moisture from the
refrigerant by adsorbing and retaining it deep within the desiccant
granules. The blend of desiccants used in the Catch-All Filter-Drier
are specially formulated for exceptional water removal.
Acid – The Catch-All Filter-Drier is unexcelled in acid removal
ability. The various organic acids are adsorbed and held by the desiccant in a manner similar to the adsorption of moisture. Tests have
demonstrated that the Catch-All Filter-Drier has superior acid
SEALED TYPE – LIQUID LINE AND SUCTION LINE SPECIFICATIONS
C
■
“C” SERIES LIQUID LINE TYPE
SAE FLARE
SUCTION LINE
TYPE
VOLUME of
CONNECTION SIZE DESICCANT
Inches
Cubic Inches
OVERALL LENGTH
Inches
SOLDER
DIAMETER
SOCKET DEPTH of BODY
Inches
Inches
ODF SOLDER
ODF SOLDER
SAE FLARE
ODF SOLDER
C-032-S
C-032-CAP
C-032-CAP-T
—
1/4
4.19
3.81
0.38
—
Extended 1/4 Male
—
5.81
—
C-032-F
—
—
3.81
—
—
C-032-FM
—
—
3.81
—
—
4.69
4.75
—
3.88
4.19
4.38
0.44
0.38
0.44
4.19
—
—
4.19
—
—
5.19
4.31
0.44
5.62
—
6.06
6.31
6.25
—
6.75
6.94
7.25
—
—
9.69
9.88
10.19
—
—
—
9.56
9.94
10.25
—
—
5.12
5.31
5.25
5.44
5.75
5.94
5.88
6.00
6.31
6.75
6.93
8.88
9.00
9.25
9.65
9.80
9.75
—
9.05
9.35
9.81
9.75
16.00
16.00
0.38
0.44
0.44
0.50
0.38
0.44
0.44
0.50
0.62
0.62
0.75
0.44
0.50
0.62
0.62
0.75
0.96
—
0.50
0.62
0.75
0.96
0.75
0.96
C-032
—
C-033
C-052
—
C-033-S
C-052-S
C-0525-S
—
—
C-052-F
—
—
C-052-FM
—
—
C-053
C-053-S
—
C-082
C-082-S
C-0825-S
C-083-S
C-084-S
C-162-S
C-1625-S
C-163-S
C-164-S
C-165-S
—
C-167-S
C-303-S
C-304-S
C-305-S
C-306-S
C-307-S
C-309-S
—
C-414-S
C-415-S
C-417-S
C-419-S
C-607-S
C-609-S
C-083
C-084
C-162
C-163
C-164
C-165
C-303
C-304
C-305
C-413
C-414
C-415
—
—
—
—
—
—
—
—
—
—
—
—
C-083-S-T-HH
C-084-S-T-HH
—
—
—
C-164-S-T-HH
C-165-S-T-HH
C-166-S-T-HH
C-167-S-T-HH
—
—
C-305-S-T-HH
C-306-S-T-HH
C-307-S-T-HH
C-309-S-T-HH
—
—
—
C-417-S-T-HH
C-419-S-T-HH
C-607-S-T-HH
C-609-S-T-HH
1/4 Male - Inlet
1/4 Female - Outlet
1/4 Female - Inlet
1/4 Male - Outlet
3/8
1/4
5/16
1/4 Male - Inlet
1/4 Female - Outlet
1/4 Male - Inlet
1/4 Female - Outlet
3/8
1/4
5/16
3/8
1/2
1/4
5/16
3/8
1/2
5/8
3/4
7/8
3/8
1/2
5/8
3/4
7/8
1-1/8
3/8
1/2
5/8
7/8
1-1/8
7/8
1-1/8
UL and ULC Listed – Guide SMGT-File No. SA-1756. Maximum Rated Pressure of 650 psig.
No CE marking according to art. 3.3 PED 97/23/EC.
3
5
9
16
30
41
60
—
US
LISTED
Tons °F psi
■
1.75
2.44
2.62
3.00
3.00
3.50
3.00
Page 14 — CATALOG 744
FILTER-DRIERS
removal ability. This ability, along with its excellent ability to clean
up the oil, is responsible for the excellent field performance in cleaning up severely contaminated systems.
Oil, Sludge and Varnish – Even the best refrigeration oils break
down to produce varnish, sludge and organic acids. Only the CatchAll Filter-Drier is capable of efficiently removing these products
of oil decomposition.
CO2
Special Applications – A special “HH” core Catch-All FilterDrier is available to remove wax which frequently causes difficulty
on low temperature refrigeration systems. For cap tube systems, use
the C-032-CAP or C-032-CAP-T Catch-All which has fittings suitable for attaching to any size capillary tube.
Remember...It’s the CORE that counts!
SEALED TYPE – LIQUID LINE AND SUCTION LINE SPECIFICATIONS
C
■
“C” SERIES LIQUID LINE TYPE
SAE FLARE
SUCTION LINE
TYPE
CONNECTION SIZE
Inches
VOLUME of
DESICCANT
cm 3
OVERALL LENGTH
mm
SOLDER
DIAMETER
SOCKET DEPTH of BODY
mm
mm
ODF SOLDER
ODF SOLDER
SAE FLARE
ODF SOLDER
C-032-S
C-032-CAP
C-032-CAP-T
—
1/4
106
97
10
—
Extended 1/4 Male
—
148
—
C-032-F
—
—
97
—
—
C-032-FM
—
—
97
—
—
119
121
—
99
106
111
11
10
11
106
—
—
106
—
—
132
109
11
143
—
154
160
159
—
171
176
184
—
—
246
251
259
—
—
—
243
252
260
—
—
130
135
133
138
146
151
149
152
160
171
176
226
229
235
245
249
248
—
230
237
249
248
406
406
10
11
11
13
10
11
11
13
16
16
19
11
13
16
16
19
24
—
13
16
19
24
19
24
C-032
—
C-033
C-052
—
C-033-S
C-052-S
C-0525-S
—
—
C-052-F
—
—
C-052-FM
—
—
C-053-S
—
C-053
C-082
C-083
C-084
C-162
C-163
C-164
C-165
C-303
C-304
C-305
C-413
C-414
C-415
—
—
—
—
—
—
—
—
—
—
C-082-S
C-0825-S
C-083-S
C-084-S
C-162-S
C-1625-S
C-163-S
C-164-S
C-165-S
—
C-167-S
C-303-S
C-304-S
C-305-S
C-306-S
C-307-S
C-309-S
—
C-414-S
C-415-S
C-417-S
C-419-S
C-607-S
C-609-S
—
—
C-083-S-T-HH
C-084-S-T-HH
—
—
—
C-164-S-T-HH
C-165-S-T-HH
C-166-S-T-HH
C-167-S-T-HH
—
—
C-305-S-T-HH
C-306-S-T-HH
C-307-S-T-HH
C-309-S-T-HH
—
—
—
C-417-S-T-HH
C-419-S-T-HH
C-607-S-T-HH
C-609-S-T-HH
1/4 Male - Inlet
1/4 Female - Outlet
1/4 Female - Inlet
1/4 Male - Outlet
3/8
1/4
5/16
1/4 Male - Inlet
1/4 Female - Outlet
1/4 Male - Inlet
1/4 Female - Outlet
3/8
1/4
5/16
3/8
1/2
1/4
5/16
3/8
1/2
5/8
3/4
7/8
3/8
1/2
5/8
3/4
7/8
1-1/8
3/8
1/2
5/8
7/8
1-1/8
7/8
1-1/8
49
82
147
262
492
672
983
UL and ULC Listed – Guide SMGT-File No. SA-1756. Maximum Rated Pressure of 44.8 barg.
No CE marking according to art. 3.3 PED 97/23/EC.
—
US
LISTED
kW °C bar
■
44
62
67
76
76
89
76
CATALOG 744 — Page 15
CO2
FILTER-DRIERS
SEALED TYPE – LIQUID LINE RATINGS AND SELECTION RECOMMENDATIONS
kW °C bar
Tons °F psi
■
TYPE
■
■
WSURFACE
FILTERING AREA
Square Inches
QREFRIGERANT
FLOW CAPACITY
Tons at 1 psi ∆P
■
TYPE
SEALED TYPE
C-032
C-032-CAP
C-032-S
C-032-F
C-032-FM
C-033
C-033-S
C-052
C-052-S
C-052-F
C-052-FM
C-0525-S
C-053
C-053-S
C-082
C-082-S
C-0825-S
C-083
C-083-S
C-084
C-084-S
C-162
C-162-S
C-1625-S
C-163
C-163-S
C-164
C-164-S
C-165
C-165-S
C-303
C-303-S
C-304
C-304-S
C-305
C-305-S
C-307-S
C-414
C-414-S
C-415
C-415-S
C-417-S
C-419-S
C-607-S
C-609-S
2.02
4.90
5.37
2.89
4.76
5.77
6.52
2.89
21
5.06
6.36
7.22
12.2
13.5
2.89
33
5.06
6.36
7.22
14.2
15.4
19.4
22.4
6.37
53
67
106
QREFRIGERANT
FLOW CAPACITY
kW at 0.07 bar ∆P
SEALED TYPE
9
15
WSURFACE
FILTERING AREA
cm 2
14.2
15.4
20.9
23.8
30.4
16.1
17.4
22.3
24.8
31.1
34.3
41.1
47.0
C-032
C-032-CAP
C-032-S
C-032-F
C-032-FM
C-033
C-033-S
C-052
C-052-S
C-052-F
C-052-FM
C-0525-S
C-053
C-053-S
C-082
C-082-S
C-0825-S
C-083
C-083-S
C-084
C-084-S
C-162
C-162-S
C-1625-S
C-163
C-163-S
C-164
C-164-S
C-165
C-165-S
C-303
C-303-S
C-304
C-304-S
C-305
C-305-S
C-307-S
C-414
C-414-S
C-415
C-415-S
C-417-S
C-419-S
C-607-S
C-609-S
7.03
58
17.0
18.6
10.0
97
16.5
20.0
22.7
10.0
135
17.6
22.1
25.1
42.4
46.9
10.0
213
17.6
22.1
25.1
49.4
53.6
67.4
77.6
22.1
342
432
684
49.4
53.6
72.5
82.5
105
55.7
60.5
77.4
86.0
108
119
143
163
Q Ratings based on 20°F (-5°C) liquid, -20°F (-30°C) evaporator temperature.
WThe filtration area is equal to the core surface area plus the large internal surface available for depth filtration.
The variation in flow ratings of filter-driers having the same size core and shell is caused by the difference in connection sizes used.
Page 16 — CATALOG 744
FILTER-DRIERS
CO2
REPLACEABLE CORE TYPE
ODF SOLDER CONNECTIONS
The rugged construction of the Replaceable Core Catch-All has
proven itself in the field for many years. The design features include:
1. The famous molded porous core for maximum contaminant
removal. The core cannot swell, powder or pack – assuring ease
of installation and removal.
2. The bolt and nut attachment of the end plate provides simple
trouble-free installation.
3. The internal construction gives a one piece assembly and assures
proper core alignment.
RCW-48
C
C-969-G
US
LISTED
4. A complete line of fitting sizes – all with copper fittings.
5. No plastic parts are used – all internal parts are plated steel.
6. A corrosion resistant powder paint protects the exterior of the
shell.
SPECIFICATIONS
D
*P
Diameter
TYPE C-R424-G THROUGH C-R427-G
TYPE C-485-G THROUGH C-40033-G
TYPE C-484-P THROUGH C-40016-P
G
E
C
F
B
G
A
LIQUID LINE - Inches lb.
TYPE
C-R424-G
C-R425-G
C-R427-G
FILTER
CONNECTION
NO. OF
VOLUME
OPTIONAL
CORE
SIZE
CORES
OF
ELEMENT
SECONDARY
PART
Inches
OR FILTER
DESSICANT PART
FILTER **
NUMBER
ODF Solder
ELEMENTS
Cu. In.
NUMBER
1/2
5/8
7/8
—
1
RCW-42
42
—
MOUNTING
BRACKETS
■
SHELL DIMENSIONS
Inches
A
B
C
D
E
F
A-175-1
9.00
9.06
9.44
4.75
—
6.76
6.94
7.25
2.81
2.69
3.03
SHIPPING
WEIGHT
lb
G
*P
3.50
.50
.62
.75
6.50
6-1/2
3.50
3.72
3.78
3.94
3.97
4.75
.50
.75
.91
.97
1.09
7.50
12
C-R420 Series have a maximum rated pressure of 650 psi.
C-485-G
C-487-G
C-489-G
C-4811-G
C-4813-G
5/8
7/8
1-1/8
1-3/8
1-5/8
48
RPE-48-BD
A-685
9.15
9.30
9.50
9.60
9.60
6.00
5.00
5.92
6.07
6.37
6.37
6.37
FS-480
1
C-967-G
C-969-G
C-9611-G
C-9613-G
7/8
1-1/8
1-3/8
1-5/8
FS-960
2
96
RPE-48-BD
A-685
14.84
15.04
6.00
15.14
15.14
5.00
11.61
11.81
11.91
11.91
3.72
3.78
3.94
3.97
4.75
.75
.91
13.00
.97
1.09
16
C-1449-G
C-14411-G
C-14413-G
1-1/8
1-3/8
1-5/8
FS-1440
3
144
RPE-48-BD
A-685
20.58
20.68 6.00
20.68
17.45 3.94
5.00 17.45 3.94
17.45 3.97
4.75
.97
.97 18.62
1.09
20
C-19211-G
C-19213-G
C-19217-G
1-3/8
1-5/8
2-1/8
FS-19200
4
192
RPE-48-BD
A-685
26.22
26.22 6.00
26.22
22.99 3.94
5.00 22.99 3.97
22.43 4.65
4.75
.97
1.09 24.25
1.38
23
27.83
7.50
27.89
6.25
23.88 5.12
24.00 5.32
6.00
1.12
25.62
1.38
40
47
47
47
49
49
RCW-48,
RCW-4864,
or
RC-4864-HH
C-480 through C-19200 Series (including NPT pipe connections) have a maximum rated pressure of 650 psi.
C-30013-G
C-30017-G
1-5/8
2-1/8
C-40017-G
C-40021-G
C-40025-G
C-40029-G
C-40033-G
2-1/8
2-5/8
3-1/8
3-5/8
4-1/8
—
—
3
4
300
RCW-100,
RC-10098,
or
RC-10098-HH
400
RPE-100
A-175-2
RPE-100
34.42
35.15
A-175-2 34.92 7.50
34.92
34.98
30.50
30.56
6.25 29.81
30.06
29.81
5.31
5.75
5.69
5.75
5.81
6.00
1.38
1.50
1.75 32.12
1.53
1.53
5.85
11.44
17.19
22.62
3.41
3.48
3.66
3.76
4.75
—
7.50
13.00
18.62
24.25
12
16
20
23
6.25 30.38 4.38
6.00
—
32.12
51
C-30000 & C-40000 Series (including the C-40016-P) have a maximum rated pressure of 600 psi.
NPT PIPE CONNECTIONS
C-484-P
C-966-P
C-1448-P
C-19212-P
1/2
3/4
1
1-1/2
—
1
2
3
4
RCW-48,
RC-4864, or
RC-4864-HH
48
96
144
192
RPE-48-BD
C-40016-P
2
—
4
RCW-100
RC-10098, or
RC-10098-HH
400
RPE-100
A-685
9.08
14.67
6.00
20.42
25.85
A-175-2 34.44 7.50
5.00
ULUS Listed — Guide-SMGT-File No. SA-1756.
C
* “P” Dimension is the pull space required to change core.
**Optional Secondary Filter must be purchased separately. O-rings (p/n 621-025) are supplied with each secondary filter, but can be purchased separately. The secondary filter
cannot be used if the shell is installed in the suction line.
Type numbers with G suffix indicate that unit is supplied with 1/4” female pipe connection in the end plate and pipe plug. For liquid line service and angle charging valve for
system charging purposes can be installed in place of the pipe plug. Angle charging and Schrader type access valves are available from your Sporlan Wholesaler.
CATALOG 744 — Page 17
CO2
FILTER-DRIERS
SPECIFICATIONS
D
*P
Diameter
TYPE C-R424-G THROUGH C-R427-G
TYPE C-485-G THROUGH C-40033-G
TYPE C-484-P THROUGH C-40016-P
G
E
C
F
B
G
A
LIQUID LINE - mm kg
TYPE
C-R424-G
C-R425-G
C-R427-G
FILTER
CONNECTION
NO. OF
OPTIONAL
CORE
VOLUME OF ELEMENT
SIZE
CORES
SECONDARY
PART
DESSICANT PART
Inches
OR FILTER
cm 3
FILTER **
NUMBER
NUMBER
ODF Solder
ELEMENTS
1/2
5/8
7/8
—
1
RCW-42
688
—
MOUNTING
BRACKETS
■
SHELL DIMENSIONS
mm
SHIPPING
WEIGHT
kg
A
B
C
D
E
F
G
*P
A-175-1
229
230
240
121
—
172
176
184
71
68
77
71
13
16
19
13
3.0
152
127
150
154
162
162
162
89
94
96
100
101
121
13
19
23
25
28
191
5.5
C-R420 Series have a maximum rated pressure of 44.8 bar.
C-485-G
C-487-G
C-489-G
C-4811-G
C-4813-G
5/8
7/8
1-1/8
1-3/8
1-5/8
787
RPE-48-BD
A-685
232
236
241
244
244
FS-480
1
C-967-G
C-969-G
C-9611-G
C-9613-G
7/8
1-1/8
1-3/8
1-5/8
FS-960
2
1573
RPE-48-BD
A-685
377
382
385
385
152
127
295
300
303
303
94
96
100
101
121
19
23
25
28
330
7.3
C-1449-G
C-14411-G
C-14413-G
1-1/8
1-3/8
1-5/8
FS-1440
3
2360
RPE-48-BD
A-685
523
525
525
152
127
443
443
443
100
100
101
121
25
25
28
473
9.1
C-19211-G
C-19213-G
C-19217-G
1-3/8
1-5/8
2-1/8
FS-19200
4
3146
RPE-48-BD
A-685
666
666
666
152
127
584
584
570
100
101
118
121
25
28
35
616
10.5
A-175-2
707
708
191
159
607
610
130
135
152
28
35
651
18.2
A-175-2
874
893
887
887
888
191
159
775
776
757
764
757
135
146
145
146
148
152
35
38
44
39
39
816
21.4
21.4
21.4
22.3
22.3
RCW-48,
RCW-4864,
or
RC-4864-HH
C-480 through C-19200 Series (including NPT pipe connections) have a maximum rated pressure of 44.8 bar.
C-30013-G
C-30017-G
1-5/8
2-1/8
C-40017-G
C-40021-G
C-40025-G
C-40029-G
C-40033-G
2-1/8
2-5/8
3-1/8
3-5/8
4-1/8
—
—
3
4
4916
RCW-100,
RC-10098,
or
RC-10098-HH
6555
RPE-100
RPE-100
C-30000 & C-40000 Series (including the C-40016-P) have a maximum rated pressure of 41.4 bar.
NPT PIPE CONNECTIONS
C-484-P
C-966-P
C-1448-P
C-19212-P
1/2
3/4
1
1-1/2
—
1
2
3
4
RCW-48,
RC-4864, or
RC-4864-HH
787
1573
2360
3146
RPE-48-BD
A-685
231
373
519
657
152
127
149
291
437
575
87
88
93
96
121
—
191
330
473
616
5.5
7.3
9.1
10.5
C-40016-P
2
—
4
RCW-100
RC-10098, or
RC-10098-HH
6555
RPE-100
A-175-2
875
191
159
772
111
152
—
816
23.2
ULUS Listed — Guide-SMGT-File No. SA-1756.
C
* “P” Dimension is the pull space required to change core.
**Optional Secondary Filter must be purchased separately. O-rings (p/n 621-025) are supplied with each secondary filter, but can be purchased separately. The secondary filter
cannot be used if the shell is installed in the suction line.
Type numbers with G suffix indicate that unit is supplied with 1/4” female pipe connection in the end plate and pipe plug. For liquid line service and angle charging valve for
system charging purposes can be installed in place of the pipe plug. Angle charging and Schrader type access valves are available from your Sporlan Wholesaler.
Page 18 — CATALOG 744
FILTER-DRIERS
CO2
LIQUID LINE RATINGS and SELECTION RECOMMENDATIONS
kW bar °C
Tons psi °F
■
TYPE
■
■
WSURFACE
FILTERING AREA
Square Inches
QREFRIGERANT
FLOW CAPACITY
Tons at 1 psi ∆P
REPLACEABLE CORE TYPE WITH
HIGH WATER CAPACITY CORES (See page 20)
C-R424-G
C-R425-G
C-R427-G
C-485-G
C-487-G
C-489-G
C-967-G
C-969-G
C-1449-G
C-14411-G
C-19211-G
C-19213-G
C-19217-G
C-30013-G
C-40017-G
67
64
128
192
256
294
392
16.0
19.1
26.1
20.7
33.7
60.9
55.3
68.6
83.6
94.3
119
139
147
123
147
■
TYPE
WSURFACE
FILTERING AREA
cm 2
QREFRIGERANT
FLOW CAPACITY
kW at 0.07 bar ∆P
REPLACEABLE CORE TYPE WITH
HIGH WATER CAPACITY CORES (See page 20)
C-R424-G
C-R425-G
C-R427-G
C-485-G
C-487-G
C-489-G
C-967-G
C-969-G
C-1449-G
C-14411-G
C-19211-G
C-19213-G
C-19217-G
C-30013-G
C-40017-G
432
413
826
1239
1652
1897
2529
55.5
66.4
90.6
72.0
117
211
192
238
290
327
412
484
509
431
516
Q Ratings based on 20°F (-5°C) liquid, -20°F (-30°C) evaporator temperature.
WThe filtration area is equal to the core surface area plus the large internal surface available for depth filtration.
The variation in flow ratings of filter-driers having the same size core and shell is caused by the difference in connection sizes used.
CATALOG 744 — Page 19
CO2
FILTER-DRIERS
SUCTION LINE FILTER-DRIER RATINGS
FOR NEW SYSTEMS AND CLEAN-UP AFTER BURNOUT
SELECTION INSTRUCTIONS
To reduce the pressure drop through replaceable core shells, substitute cores with filter elements (see page 20) after the system has been
cleaned up. The 6171-5 screen should be discarded when cores are
replaced with RPE-48-BD elements in RSF shells.
The flow capacities are rated at the maximum recommended pressure
drop for permanent installation.
To ensure the suction line filter-drier has ample contaminant removal ability, selection must be based on flow capacity and the amount of desiccant required for system clean-up.
The suction line filter-drier must be large enough to adequately
remove acid, moisture and solid contaminants without causing
nuisance plug-ups. Sizing is especially important for sealed type
suction line filter-driers since they should be sized to clean a small
system with one service call.
For complete description of the suggested system clean-up procedure,
request Bulletin 40-10.
SUCTION LINE FLOW CAPACITY
Tons psi °F
kW bar °C
■
■
REPLACEABLE
CORE TYPE
PRESSURE DROP (psi)
C-083-S-T-HH
C-084-S-T-HH
C-144-S-T-HH
C-145-S-T-HH
C-146-S-T-HH
C-147-S-T-HH
C-149-S-T-HH
C-164-S-T-HH
C-165-S-T-HH
C-166-S-T-HH
C-167-S-T-HH
C-305-S-T-HH
C-306-S-T-HH
C-307-S-T-HH
C-309-S-T-HH
C-417-S-T-HH
C-419-S-T-HH
C-437-S-T-HH
C-439-S-T-HH
C-4311-S-T-HH
C-4313-S-T-HH
C-607-S-T-HH
C-609-S-T-HH
RSF-487-T
RSF-489-T
RSF-4811-T
RSF-4813-T
RSF-4817-T
RSF-4821-T
RSF-9611-T
RSF-9613-T
RSF-9617-T
RSF-9621-T
RSF-9625-T
-20°F
3.0
4.15
4.15
4.15
7.05
9.64
10.4
13.9
5.54
6.42
8.02
9.15
6.88
8.99
10.8
11.9
12.2
12.4
16.1
20.3
22.3
24.6
13.5
15.2
20.4
24.6
29.9
32.2
34.8
37.5
40.7
50.9
50.9
59.1
60.5
■
EVAPORATOR TEMPERATURE
8.0*
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
35.4
42.3
51.7
55.8
60.0
64.4
81.6
87.5
87.5
102
104
SEALED TYPE
SEALED TYPE
EVAPORATOR TEMPERATURE
REPLACEABLE
CORE TYPE
■
PRESSURE DROP (bar)
C-083-S-T-HH
C-084-S-T-HH
C-144-S-T-HH
C-145-S-T-HH
C-146-S-T-HH
C-147-S-T-HH
C-149-S-T-HH
C-164-S-T-HH
C-165-S-T-HH
C-166-S-T-HH
C-167-S-T-HH
C-305-S-T-HH
C-306-S-T-HH
C-307-S-T-HH
C-309-S-T-HH
C-417-S-T-HH
C-419-S-T-HH
C-437-S-T-HH
C-439-S-T-HH
C-4311-S-T-HH
C-4313-S-T-HH
C-607-S-T-HH
C-609-S-T-HH
RSF-487-T
RSF-489-T
RSF-4811-T
RSF-4813-T
RSF-4817-T
RSF-4821-T
RSF-9611-T
RSF-9613-T
RSF-9617-T
RSF-9621-T
RSF-9625-T
-30°C
0.20
13.8
13.8
13.8
23.4
32.1
34.8
46.5
18.4
21.4
26.7
30.4
22.9
29.9
36.0
39.8
40.7
41.3
53.6
67.4
74.3
81.8
45.0
50.5
68.0
81.8
99.6
107
116
125
135
169
169
197
201
*Denotes TEMPORARY INSTALLATION. Cores for system clean-up; RPE-48-BD Filter Elements should be installed after clean-up.
Ratings based on 20°F (-5°C) liquid, 25°F (14°C) superheat.
Rated in accordance with ARI Standard 730.
0.55*
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
120
143
175
189
203
218
237
296
296
344
353
Page 20 — CATALOG 744
CO2
FILTER-DRIERS
SIGNIFICANCE OF THE TYPE NUMBER
The letters and numerals in the Catch-All® type number each have
a significance. The “C” indicates Catch-All. The first two or three
digits indicate cubic inches of desiccant. The last one or two digits
indicate fitting size in eighths of an inch. For sealed models, a “-S”
following the last digit indicates solder fittings, and no letter indicates a flare fitting. Replaceable core models (C-420 and larger) only
have solder connections and the “-S” is omitted. Examples are: C-083
is 8 cu. in. and 3/8” flare, C-309-S is 30 cu. in. and 1-1/8” solder, C19213-G is 192 cu. in. and 1-5/8” solder.
Other suffix letters indicate special qualities. For example:
“-T”
indicates a pressure tap consisting of a Schrader type access
valve on the inlet end of the Catch-All.
“-HH” indicates a charcoal style core for wax removal and clean-up after a hermetic motor burnout.
“-F”
indicates a female flare outlet fitting with a male flare inlet
fitting.
“-FM” indicates a female flare inlet fitting with a male flare outlet fitting.
“-CAP” indicates a Catch-All particularly designed for installation
on capillary tube systems.
REPLACEABLE CORES AND PLEATED FILTER ELEMENTS – ORDER SEPARATELY
Cores for replaceable core type filter-driers are molded of exactly the
same desiccants that are used in the popular sealed filter-driers.
Cores are individually packed in metal cans, fully activated and hermetically sealed against moisture and dirt.
Filter Elements are dried and packed in individual sealed metal cans.
This method of packaging prevents the element from picking up
moisture from the atmosphere.
Detailed instructions are printed on each can. Each can contains a
“triple gasket” consisting of a new end plate gasket, an end plate
gasket for certain competitive filter-driers and a core gasket where
desired. See the specifications on pages 16 and 17 for the number of
cores required for each type drier.
RCW-42 – High Water Capacity Core – Order as separate item – Fits
ONLY shell type C-R424, C-R425 and C-R427. Designed specially
for use with POE oils. This core should be used on systems that have
a ruptured water cooled condenser, or that have been exposed to the
atmosphere, or for some reason have a high amount of moisture in
the system.
RC-4864 – Activated Core – Order as separate item – Fits types
C-480 thru C-19200 Series shells and Replaceable Suction Filter
(RSF) shells. This is the traditional core suitable for most installations in the liquid or suction line applications in mineral oil systems.
RCW-48 – High Water Capacity Core – Order as separate item –
Fits types C-480 thru C-19200 Series shells and Replaceable Suction
Filter (RSF) shells. Designed specially for use with POE oils. This
core should be used on systems that have a ruptured water cooled
condenser, or that have been exposed to the atmosphere, or for some
reason have a high amount of moisture in the system.
RC-4864-HH – Activated Charcoal Core – Order as separate item –
Fits types C-480 thru C-19200 Series shells and Replaceable Suction
Filter (RSF) shells. This core
should be used for wax removal on
low temperature systems, and for
clean-up of systems that have had
a hermetic motor burnout.
RPE-48-BD – Filter Element –
Order as separate item – Fits types
C-480 thru C-19200 Series shells and Replaceable Suction Filter
(RSF) shells. This element should be used in RSF shells installed in
the suction line to obtain the lowest possible pressure drop. In cleaning up a system after a hermetic motor burnout, cores should be used
first. Then after the system is thoroughly clean, this filter element can
be installed in the RSF shell.
RC-10098 – Activated Core — Order as separate item—Fits
types C-30000 and C-40000 Series shells. This is the traditional
core suitable for liquid and suction line applications in mineral oil
systems.
RCW-100 – High Water Capacity Core — Order as separate
item—Fits types C-30000 and C-40000 Series shells. Designed
specially for use with POE lubricants. This core should be used on
systems that have a ruptured water cooled condenser, or that have
been exposed to the atmosphere, or for some reason have a high
amount of moisture in the system.
RC-10098-HH – Activated Charcoal Core — Order as separate
item—Fits types C-30000 and C-40000 Series shells. This core
should be used for wax removal on low temperature systems, and
for clean-up of systems that have had a hermetic motor burnout.
RPE-100 – Filter Element — Order as a separate item—Fits types
C-30000 and C-40000 Series shells. This filter element should be
used in the suction line to obtain the lowest possible pressure drop
after cores were used for system clean-up.
HH STYLE CATCH-ALL FOR WAX REMOVAL
Small amounts of wax are often a problem on low temperature
systems. Even well engineered systems frequently contain minute quantities of wax which are sufficient to clog expansion valve
screens or cause sticking of the valve. Sporlan has developed a special blend of desiccants including activated charcoal which removes
small amounts of wax in the liquid line before this wax can cause
trouble at the expansion valve. These Catch-All Filter-Driers have
been very successful in correcting trouble jobs in the field.
Select an HH Style Catch-All Filter-Drier if wax problems occur on
low temperature systems. In addition to their wax removal ability,
these filter-driers will remove all of the other harmful contaminants
that the standard filter-driers remove. Listed in the table are various
Catch-All models that incorporate the HH style core.
TYPE
C-052-HH
C-082-HH
C-083-HH
C-162-HH
C-163-HH
C-163-S-HH
C-164-HH
C-164-S-HH
C-165-HH
C-165-S-HH
CONNECTIONS
Inches
1/4 SAE Flare
1/4 SAE Flare
3/8 SAE Flare
1/4 SAE Flare
3/8 SAE Flare
3/8 ODF Solder
1/2 SAE Flare
1/2 ODF Solder
5/8 SAE Flare
5/8 ODF Solder
TYPE
CONNECTIONS
Inches
C-303-HH
C-304-HH
C-304-S-HH
C-305-HH
C-305-S-HH
C-414-HH
C-415-HH
C-417-S-HH
3/8 SAE Flare
1/2 SAE Flare
1/2 ODF Solder
5/8 SAE Flare
5/8 ODF Solder
1/2 SAE Flare
5/8 SAE Flare
7/8 ODF Solder
RC-4864-HH
Replaceable
Core
CATALOG 744 — Page 21
CO2
FILTER-DRIERS
TYPE CO SERIES
FOR TRANSCRITICAL CO2
The CO Series product offering has
been designed to withstand the extreme
pressure of transcritical carbon dioxide
(R-744) systems while providing comType CO-022-S
plete system protection in a compact
design. A unique combination of moisture, acid, and solid debris
removal extends the life, reliability, and capacity of these systems that
operate under extreme conditions.
The smaller models are ideal for application in vending machine
and beverage dispensing equipment. The larger models are ideal for
applications up to 10 tons. Combining ideal capability in a compact
size, the CO Series enables system optimization while maximizing
protection and cost effectiveness. Other fitting sizes are available
upon request. Please contact your Sales Engineer for assistance.
DESIGN FEATURES
■ 
■ 
■ 
■ 
2,250 psi Maximum Rated Pressure (MRP) (155 bar)
6,750 psi Burst Pressure Rating (465 bar)
cURus Recognized Component in UL File SA1756
Solid copper connections for fast, easy system
connection
■  Desiccants optimized for use with R-744
DIMENSIONS
TYPE
CO-0115-S
CO-012-S
CO-022-S
CO-082-S
CO-085-S
CONNECTION
SIZE
ODF Solder - Inches
‘A’
OVERALL LENGTH
Inches (mm)
‘B’
SOCKET DEPTH
Inches (mm)
‘C’
TYPICAL SHELL
DIAMETER
Inches (mm)
DROPS OF R-744
WATER CAPACITY
@ 140°F (60°C)
R-744 FLOW
CAPACITY*
Tons (kW)
3/16
1/4
1/4
1/4
5/8
5.72 (145)
5.72 (145)
6.25 (159)
10.94 (278)
10.94 (278)
0.20 (5.0)
0.25 (6.4)
0.25 (6.4)
0.25 (6.4)
0.50 (12.7)
0.88 (22.4)
0.88 (22.4)
1.25 (31.8)
2.38 (61)
2.38 (61)
30
30
60
200
200
0.7 (2.5)
1.7 (6.0)
2.3 (8.0)
2.7 (8.4)
9.8 (34)
*Flow ratings based on 20°F (-5°C) liquid, -20°F (-29°C) evaporator, 1 psi (0.07 bar) differential pressure.
A
B
C
Page 22 — CATALOG 744
CO2
BALL VALVES
EBV and EBVT SERIES (WITH ACCESS FITTING)
■ Welded body joint. Factory tested to ensure positive, leak-
■ All EBV(T) ball valves are
■ Full size ports for unrestricted flow on most sizes 1/4” (6
■ Full
free performance. Forged brass body construction with extended
copper fittings and optional access fittings.
mm) through 2-1/8” (54 mm).
■ Dual Teflon seals surround the polished, brass ball
to prevent leakage. Stem seal and stem washer provide the
primary stem seal. Bottom load stem for safety.
■ Stainless steel stop plate ensures fully open to fully closed
with a 1/4 turn.
■ Ball internal relief port design ensures positive shut-off in
bi-directional and may be
installed in any position.
refrigeration service
temperature range: -40°F
to +325°F (-40°C to +149°C).
Type EBVT
■ Design working pressure: 700 psig (49 bar).
■ U.L. Listed File No. SA13413 (SFJQ)
■ Suitable for subcritical CO2 up to 700 psig (49 bar).
■ Date code stamped into valve body Yr/Mo/Day
either flow direction, even during system evacuation.
SPECIFICATIONS
Inches
VALVE
TYPE
EBV-1020**
EBV-1030
EBV-1040
EBV-1050
EBV-1060
EBV-1070
EBV-1090
EBV-1110
EBV-1130
EBV-1170
EBV-1210
EBV-1250
EBV-2210*
EBV-2250*
VALVE TYPE
WITH
ACCESS
FITTING
EBVT-1020**
EBVT-1030
EBVT-1040
EBVT-1050
EBVT-1060­­
EBVT-1070
EBVT-1090
EBVT-1110
EBVT-1130
EBVT-1170
EBVT-1210
EBVT-1250
EBVT-2210*
EBVT-2250*
OVERALL SOCKET
CONNECTION
LENGTH DEPTH
(ODF)
‘D’
‘B’
1/4
3/8
1/2
5/8
3/4
7/8
1-1/8
1-3/8
1-5/8
2-1/8
2-5/8
3-1/8
2-5/8
3-1/8
6.50
6.50
6.50
6.50
7.25
7.25
8.50
9.25
10.00
11.38
14.37
16.54
12.88
14.37
0.31
0.31
0.38
0.50
0.62
0.75
0.91
0.97
1.09
1.34
1.47
1.66
1.47
1.66
‘L’
0.63
0.63
0.63
0.63
0.83
0.83
1.00
1.22
1.53
1.87
2.36
2.81
1.87
2.36
OVERALL PORT MOUNTING MOUNTING
HEIGHT SIZE
HOLES
HOLE SIZE
‘M’
‘C’
‘E’
‘H’
2.14
2.14
2.14
2.14
2.63
2.63
2.98
3.70
4.29
5.18
6.06
7.01
5.18
6.06
0.50
0.50
0.50
0.50
0.75
0.75
1.00
1.25
1.50
2.00
2.50
3.15
2.00
2.50
0.79
0.79
0.79
0.79
1.26
1.26
1.57
1.89
2.36
2.95
2.95
4.10
2.95
2.95
#8-36 UNF
#8-36 UNF
#8-36 UNF
#8-36 UNF
#8-36 UNF
#8-36 UNF
#10-32 UNF
#10-32 UNF
1/4-28 UNF
1/4-28 UNF
1/4-28 UNF
5/16-24 UNF
1/4-28 UNF
1/4-28 UNF
Cv
WEIGHT
EBV &
EBVT
(lbs.)
2.1
4.3
7.0
13.9
21.0
30.3
61.3
85.2
212
285
301
420
238
324
0.725
0.725
0.725
0.725
1.375
1.405
2.10
3.36
5.39
10.09
19.25
40.13
11.11
19.25
Kv
WEIGHT
EBV &
EBVT
(lbs.)
1.80
3.67
5.97
11.86
17.93
25.86
52.29
72.68
181.18
242.85
256.16
256.16
202.59
276.71
0.725
0.725
0.725
0.725
1.375
1.405
2.10
3.36
5.39
10.09
19.25
19.25
11.11
19.25
* Reduced port and not a stock item. Minimum order quantity may be required.
** EBV-1020 and EBVT-1020 are not stock items. Minimum order quantity is required.
mm
VALVE
TYPE
VALVE TYPE
WITH
ACCESS
FITTING
EBV-6MM**
EBV-10MM
EBV-12MM
EBV-16MM
EBV-18MM
EBV-22MM
EBV-28MM
EBV-35MM
EBV-42MM
EBV-54MM
EBV-64MM
EBV-76MM
EBV-64MM*
EBV-76MM*
EBVT-6MM**
EBVT-10MM
EBVT-12MM
EBVT-16MM
EBVT-18MM­­
EBVT-22MM
EBVT-28MM
EBVT-35MM
EBVT-42MM
EBVT-54MM
EBVT-64MM
EBVT-76MM
EBVT-64MM*
EBVT-76MM*
OVERALL SOCKET
CONNECTION
LENGTH DEPTH
(ODF)
‘D’
‘B’
6
10
12
16
18
22
28
35
42
54
64
76
64
76
165.10
165.10
165.10
165.10
184.15
184.15
215.90
234.95
254.00
289.50
365.00
420.00
327.15
365.00
8.00
8.00
10.00
13.00
17.00
20.00
24.00
25.00
28.00
35.00
35.00
38.00
35.00
38.00
* Reduced port and not a stock item. Minimum order quantity may be required.
** EBV-6MM and EBVT-6MM are not stock items. Minimum order quantity is required.
‘L’
16.00
16.00
16.00
16.00
21.08
21.08
25.40
31.00
38.86
47.50
60.00
72.00
47.50
60.00
OVERALL PORT MOUNTING MOUNTING
HEIGHT SIZE
HOLES
HOLE SIZE
‘M’
‘C’
‘E’
‘H’
54.36
54.36
54.36
54.36
66.80
66.80
75.69
93.98
108.97
131.57
153.92
178.30
131.57
153.92
12.70
12.70
12.70
12.70
19.05
19.05
25.40
31.75
38.10
50.80
63.50
80.00
50.80
63.50
20.07
20.07
20.07
20.07
32.00
32.00
39.88
48.01
59.94
74.93
74.93
104.00
74.93
74.93
#8-36 UNF
#8-36 UNF
#8-36 UNF
#8-36 UNF
#8-36 UNF
#8-36 UNF
#10-32 UNF
#10-32 UNF
1/4-28 UNF
1/4-28 UNF
1/4-28 UNF
5/16-24 UNF
1/4-28 UNF
1/4-28 UNF
CATALOG 744 — Page 23
CO2
BALL VALVES
SPECIFICATIONS (CONTINUED)
M
ØC
L
B
D
H
E
IDENTIFICATION
NOMENCLATURE - mm
Example: EVBT-10mm
NOMENCLATURE - Inches
Example: EVBT-1030
EBV
T
Valve Access
Type Fitting
–
1
03
0
Series:
1 = Full Port
2 = Reduced
Port
Fitting Size:
(In eighths
of an inch)
ie: 03 = 3/8”
Fitting
Configuration:
0 = ODF x ODF
EBV
T
Valve Access
Type Fitting
For more information on Sporlan EBV Ball Valves, please refer to Bulletin 50-10.
–
10MM
R
Metric
Fitting Size
Reduced
Port
Fitting
Configuration:
ODF x ODF
Page 24 — CATALOG 744
CO2
MOISTURE AND LIQUID INDICATOR
8 OUTSTANDING BENEFITS
1. The See•All Moisture and Liquid Indicator provides
a true moisture indication for refrigerants. The dark
green indicates dry and a bright yellow indicates wet. The one
indicator avoids the confusion found in models with two elements.
You cannot pick the wrong element when checking the moisture
content of the system.
2. Reliable and accurately calibrated color change
points. The See•All Moisture and Liquid Indicator is
accurately calibrated in parts per million of moisture for each
refrigerant. All moisture indicators change color on the basis
of relative saturation of the refrigerant. Therefore, liquid line
temperature must be considered if an accurate calibration is to
be obtained. For easy comparison, a color chart is part of the
label.
3. Color changes are easily distinguished and reversible.
The indicator’s color differs so widely between WET and DRY
conditions that there is no possibility of confusion between the
two. Colors will reverse as often as moisture concentration in the
system changes.
SA-13FM
SA-14U
SA-14UU
4. Large full view sight glass. The See•All Moisture and
Liquid Indicator has an extra large crystal clear sight glass
for viewing the refrigerant. Bubbles indicate a shortage of
refrigerants or a restriction in the liquid line.
5. Indicator protected from discoloration and dirt. The
indicator is protected by a filter pad and screen. This prevents
washing of the indicator by the refrigerant and protects it from
system contamination and turbulence.
6. Replaceable indicator element. The color indicator paper
can be changed on the new fused glass models without removing
the See•All from the line. Replacement is through the bottom
(see SA-14SU below). Request the K-SA-4 kit.
7. Disassembly of the smaller sizes not required. The
extended fittings on solder models in the smaller sizes make it
unnecessary to disassemble for installation.
8. A double duty plastic cap is supplied to keep the glass free
from dust, dirt and grease. It also permits the service engineer to
use his own discretion concerning instructions to his customers
on observing the See•All Moisture and Liquid Indicator.
SA-13FU
SA-14SU
SA-13S
SA-213
SPECIFICATIONS
Inches
Listed by Underwriters’ Laboratories, Inc. – Guide SEYW – File No. SA3182
FEMALE & MALE
MALE FLARE
CONNECFLARE
TION
OVERALL
TYPE
TYPE OVERALL
SIZES
LENGTH
NO. LENGTH
NO.
Inches
Inches
Inches
1/4
SA-12
2.87
SA-12FM
2.56
3/8
SA-13
3.37
SA-13FM
2.97
1/2
SA-14
3.81
SA-14FM
3.44
5/8
SA-15
4.13
—
—
7/8
—
—
—
—
1-1/8
—
—
—
—
1-3/8
—
—
—
—
1-5/8
—
—
—
—
MALE FLARE x
SWIVEL NUT
TYPE OVERALL
LENGTH
NO.
Inches
—
SA-13U
SA-14U
SA-15U
—
—
—
—
—
3.64
4.13
4.44
—
—
—
—
SWIVEL NUT x
FEMALE FLARE x
SWIVEL NUT
SWIVEL NUT
OVERALL
TYPE LENGTH TYPE OVERALL
LENGTH
NO.
NO.
Inches
Inches
—
—
—
—
SA-13UU
3.95
SA-13FU
3.19
SA-14UU
4.50
SA-14FU
3.75
SA-15UU
4.75
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
SWIVEL NUT x ODF
SOLDER
TYPE OVERALL
LENGTH
NO.
Inches
SWIVEL NUT x
FEMALE FLARE x
SWIVEL NUT
SWIVEL NUT
OVERALL
TYPE OVERALL
TYPE
LENGTH
LENGTH
NO.
NO.
mm
mm
—
—
—
—
SA-13UU
100
SA-13FU
81
SA-14UU
114
SA-14FU
95.3
SA-15UU
121
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
SWIVEL NUT x ODF
SOLDER
TYPE OVERALL
LENGTH
NO.
mm
—
SA-13SU
SA-14SU
SA-15SU
—
—
—
—
—
4.19
4.62
4.89
—
—
—
—
ODF SOLDER
TYPE
NO.
SA-12S
SA-13S
SA-14S
SA-15S
SA-17S
SA-19S
QSA-211
QSA-213
OVERALL
LENGTH
Inches
4.62
4.87
6.31
7.97
mm
CONNECTION
SIZES
Inches
1/4
3/8
1/2
5/8
7/8
1-1/8
1-3/8
1-5/8
FEMALE & MALE
FLARE
OVERALL
TYPE OVERALL
TYPE NO. LENGTH
NO. LENGTH
mm
mm
SA-12
72.9
SA-12FM
65.0
SA-13
85.6
SA-13FM
75.4
SA-14
96.8
SA-14FM
87.4
SA-15
105
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
MALE FLARE
MALE FLARE x
SWIVEL NUT
TYPE OVERALL
LENGTH
NO.
mm
—
SA-13U
SA-14U
SA-15U
—
—
—
—
—
92.5
105
113
—
—
—
—
—
SA-13SU
SA-14SU
SA-15SU
—
—
—
—
—
106
117
124
—
—
—
—
ODF SOLDER
TYPE
NO.
SA-12S
SA-13S
SA-14S
SA-15S
SA-17S
SA-19S
QSA-211
QSA-213
OVERALL
LENGTH
mm
117
124
160
202
Maximum Rated Pressure for all models is 650 psig (44.8 barg). Overall width is: 1.31” (33.3 mm) for 1/4” and 3/8” sizes. 1.58” (40.1 mm) for 1/2” and 5/8 sizes, and 1.38” (35.1
mm) for 7/8” and 1-1/8” sizes. Most solder connections can be used as male fittings as well as female fittings. The 1/4” ODF is 3/8” ODM, the 3/8” ODF is 1/2” ODM, the 1/2” ODF
is 5/8” ODM, and the 5/8” ODF is 3/4” ODM. Models with female flare and/or swivel nut connections are supplied with a copper gasket in the fitting.
Q These models have copper connections and feature a removable element cartridge – for replacement cartridge specify AC-20.
CATALOG 744 — Page 25
CO2
REPLACEABLE
HOW IT’S USED
The Replaceable Suction Filter shell, used
with RPE-48-BD pleated filter element,
is designed to be installed in the suction
line of new systems to remove circulating
contaminants.
Sporlan Replaceable Suction Filters are installed in the suction line of
refrigeration or air conditioning systems to remove contaminants that
may be in the system at startup.
■ 
High flow capacity
■ 
Corrosion resistant coating on shell
■ 
Can be used with desiccant cores
for clean-up after burnout
■ 
Various fitting sizes up to 1-5/8” line size
■ 
Access valve supplied for pressure drop
measurement or charging
The Replaceable Suction Filter has large fittings permitting the use
of a small shell on a system with large line sizes, resulting in considerable economy. The angle construction is suitable of flow in either
direction, which results in easy installation even on compact racks.
RSF-4817-T
DESIGN BENEFITS
The Replaceable Suction Filters should be used with cores for cleaning up a system after a hermetic motor burnout. Select the RC-4864,
RC-4864-HH or RCW-48 replaceable cores. After cleanup, install
RPE-48-BD elements in the shells.
FLOW CAPACITY SELECTION
This table below gives information for choosing the proper model for a given system. The filter elements are supplied in hermetically sealed
metal cans. For flow capacity WITH CORES, see page 19.
kW bar °C
388
776
RSF-487-T
RSF-489-T
RSF-4811-T
RSF-4813-T
RSF-4817-T
RSF-4821-T
RSF-9611-T
RSF-9613-T
7/8
1-1/8
1-3/8
1-5/8
2-1/8
2-5/8
1-3/8
1-5/8
Ratings based on 20°F (-5°C) liquid, 25°F (14°C) superheat.
Listed by Underwriters’ Laboratories, Inc. Guide SMGT File No. SA-1756. RSF shells have a 500 psig (34.5 barg) M.R.P. rating.
Note: Ratings are in accordance with ARI Standards 730. Flow capacity (tons/kW) with cores is approximately 40% of the above values.
OVERALL LENGTH
mm
9.30
9.37
9.60
9.60
9.37
9.75
15.14
15.14
FLOW CAPACITY
EVAPORATOR
TEMPERATURE
5°C
PRESSURE DROP – bar
0.07
0.14
0.20
43.1
63.4
77.3
67.6
99.3
121
99.7
147
179
One
2503
124
183
223 RPE-48-BD
166
244
298
219
322
393
157
192
107
Two
5006
143
210
256 RPE-48-BD
FILTER AREA
cm 2
TYPE
CONNECTIONS
Inches
ODF SOLDER
7/8
1-1/8
1-3/8
1-5/8
2-1/8
2-5/8
1-3/8
1-5/8
■
OVERALL LENGTH
Inches
RSF-487-T
RSF-489-T
RSF-4811-T
RSF-4813-T
RSF-4817-T
RSF-4821-T
RSF-9611-T
RSF-9613-T
FLOW CAPACITY
EVAPORATOR
TEMPERATURE
-20°F
PRESSURE DROP – psi
1
2
3
12.6
18.5
23.2
19.8
29.0
36.4
29.2
42.9
53.8
One
36.3
53.4
67.0 RPE-48-BD
48.6
71.4
89.5
64.1
94.2
118
31.3
46.1
57.7
Two
41.8
61.4
76.9 RPE-48-BD
NUMBER OF
FILTER
ELEMENTS
TYPE
■
FILTER AREA
Square Inches
■
CONNECTIONS
Inches
ODF SOLDER
■
NUMBER OF
FILTER
ELEMENTS
Tons psi °F
236
238
244
244
238
248
385
385
Page 26 — CATALOG 744
ELECTRIC VALVES
CO2
ELECTRIC EXPANSION VALVES
TYPE SER
The Sporlan SER family of Electric Expansion Valves are electronically operated bipolar stepper motor valves. When paired with an
appropriate controller and sensors, the valves provide precise liquid
flow control in subcritical CO2 applications. With high resolution linear actuators and uniquely characterized pin and port combinations,
the valves can control down to 10% of rated (full stroke) capacity. The
entire valve family now features removable M12 cables, that can be
installed in any of four orientations, and are available in four lengths
between 10’ (3 m) and 40’ (12 m).
SPECIFICATIONS
CONNECTIONS*
Small SER valves (up to SER-C) are rated 1,015 psig (70 bar). SER-D
and larger valves are approved for a rated pressure of 700 psig (48
bar).
VALVE
TYPE
For more information on Sporlan SER valves, please reference
Bulletin 100-20.
SER-AA
CONFIGURATION
SER-A
FLOW CAPACITY (FULL STROKE)
VALVE
TYPE
SER-B
Tons
kW
Cv US
Kv
SER-AA
1.08
3.74
0.02
0.02
SER-A
2.32
8.08
0.05
0.04
SER-B
4.47
15.5
0.10
0.08
SER-C
12.1
42.1
0.33
0.28
SER-DS
24.7
85.7
0.59
0.50
SERI-F
36.4
127
0.66
0.57
SERI-G(S)
47.4
165
0.73
0.63
SERI-J(S)
85.3
296
1.31
1.13
SERI-K(S)
155
537
2.38
2.05
SERI-L(S)
210
730
5.79
4.99
SER-C
SER-DS
SERI-F
SERI-G(S)
SERI-J(S)
SERI-K(S)
SERI-L(S)
INLET
(ODF)
OUTLET
(ODF)
3/8
10 mm
3/8
10 mm
3/8
10 mm
3/8
1/2
10 mm
1/2
5/8
5/8
7/8
5/8
7/8
7/8
1-1/8
1-1/8
1-3/8
1-1/8
1-3/8
3/8, 1/2, 5/8
12 mm
3/8, 1/2, 5/8
12 mm
3/8, 1/2, 5/8
12 mm
3/8, 1/2, 5/8
1/2, 5/8
12 mm
1/2, 5/8, 7/8, 1-1/8
5/8, 7/8, 1-1/8
5/8, 7/8
7/8, 1-1/8
5/8, 7/8
7/8, 1-1/8, 1-3/8
7/8, 1-1/8, 1-3/8
1-1/8, 1-3/8
1-1/8, 1-3/8, 1-5/8
1-5/8
1-1/8,1-3/8, 1-5/8
1-3/8, 1-5/8
ANGLE
STRAIGHT
THROUGH
OFFSET
X
–
X
–
X
–
X
–
–
X
X
–
X
X
X
X
X
X
X
X
*Currently available, other combinations may be possible upon request.
CAPACITY CORRECTION FACTORS
Tons psi °F ■
0°
1.12
100
.82
kW bar °C
■
LIQUID TEMPERATURE (°F)
10°
20°
30°
CORRECTION FACTOR, LIQUID CAPACITY RATING
1.06
1.00
0.93
PRESSURE DROP ACROSS VALVE** – psi
150
200
250
300
350
1.00
1.15
1.29
1.41
1.53
**Excluding distributor and high side losses.
■
■
40°
-15°
LIQUID TEMPERATURE (°C)
-10°
-5°
0°
CORRECTION FACTOR, LIQUID CAPACITY RATING
0.86
1.12
400
1.63
1.06
1.00
0.93
5°
0.86
7.0
PRESSURE DROP ACROSS VALVE** – bar
10.5
14.0
17.5
21.0
24.5
28.0
0.82
1.00
1.63
1.15
1.29
1.41
1.53
CATALOG 744 — Page 27
CO2
ELECTRIC VALVES
ELECTRIC PRESSURE REGULATING VALVES
TYPE CDS
The Sporlan CDS family of Electric
Pressure Regulating Valves are electronically operated bipolar stepper
motor valves. When paired with an
appropriate controller and sensor, the
valves provide precise temperature or
pressure control in liquid or suction subcritical CO2 applications.
CONNECTIONS*
VALVE
TYPE
AVAILABLE FITTINGS
ODF – Inches
PRESSURE
TAP
CDS-2
–
CDST-2
X
CDS-4
–
With high resolution linear actuators and balanced pistons, the CDS
family can provide accuracy and repeatability across the entire operating range, down to 10% of full stroke capacity. Rated 48 bar (700
psig), the small CDS valves (CDS-2, -4 and -7) now feature removable
M12 cables that can be installed in any of four orientations. Rated
680 psig (47 bar), the large CDS valves (-9 and -17) feature hermetic
cables that are available in four lengths, from 10’ (3 m) to 40’ (12 m).
CDST-4
X
With 17 years of field proven reliability, Sporlan CDS valves can be
counted on to meet your performance expectations. For more information, please reference Bulletin 100-40.
CDS-7
–
CDST-7
X
CDS-9
–
CDST-9
X
CDS-17
–
CDST-17
X
1/2, 5/8, 7/8
1/2, 5/8, 7/8
5/8, 7/8, 1-1/8, 1-3/8
5/8, 7/8, 1-1/8, 1-3/8
1-1/8, 1-3/8, 2-1/8
*Currently available, other combinations may be possible upon request.
SUCTION CAPACITY (FULL STROKE)
Tons psi °F ■
kW bar °C
■
TYPE
Cv US
CDS(T)-2
CDS(T)-4
CDS(T)-7
CDS(T)-9
CDS(T)-17
1.37
2.97
8.11
11.5
20.9
■
ALLOWABLE PRESSURE DROP ACROSS VALVE – psi
0.5
1
3
5
10
0.87
1.22
2.07
2.64
3.69
1.83
2.57
4.39
5.64
7.92
5.14
7.11
11.9
15.1
20.9
7.68
10.7
18.0
22.9
31.8
13.7
19.1
32.3
41.2
57.4
■
TYPE
Kv
CDS(T)-2
CDS(T)-4
CDS(T)-7
CDS(T)-9
CDS(T)-17
1.17
2.53
6.91
9.81
17.8
ALLOWABLE PRESSURE DROP ACROSS VALVE – bar
0.03
0.06
0.20
0.40
0.70
2.99
4.18
7.46
10.4
13.7
6.27
8.81
15.9
22.3
29.3
17.7
24.4
42.9
59.4
77.1
26.4
36.6
64.9
90.1
118
47.2
65.7
117
162
212
SUCTION CAPACITY CORRECTION FACTORS
Tons psi °F ■
0°
1.09
kW bar °C
■
LIQUID TEMPERATURE (°F)
10°
20°
30°
CORRECTION FACTOR, LIQUID CAPACITY RATING
1.05
1.00
0.95
EVAPORATOR TEMPERATURE (°F)
-20
0
1.00
1.18
-40
0.83
■
■
40°
-15°
LIQUID TEMPERATURE (°C)
-10°
-5°
0°
CORRECTION FACTOR, LIQUID CAPACITY RATING
0.90
1.08
20
1.38
1.04
1.00
0.96
EVAPORATOR TEMPERATURE (°C)
-25
-15
-35
0.85
1.00
1.16
5°
0.91
-5
1.33
LIQUID CAPACITY (FULL STROKE)
Tons psi °F ■
kW bar °C
■
TYPE
Cv US
CDS(T)-2
CDS(T)-4
CDS(T)-7
CDS(T)-9
CDS(T)-17
1.37
2.97
8.11
11.5
20.9
■
ALLOWABLE PRESSURE DROP ACROSS VALVE – psi
0.5
1
3
5
10
4.03
5.63
10.1
14.1
18.4
8.65
12.1
21.9
30.7
40.4
22.8
31.5
55.3
76.5
99.4
34.7
48.2
85.3
119
155
62.6
87.1
155
215
281
■
TYPE
Kv
CDS(T)-2
CDS(T)-4
CDS(T)-7
CDS(T)-9
CDS(T)-17
1.17
2.53
6.91
9.81
17.8
ALLOWABLE PRESSURE DROP ACROSS VALVE – bar
0.03
0.06
0.20
0.40
0.70
13.9
19.4
34.6
48.4
63.3
29.8
41.8
75.4
106
139
78.3
108
190
263
342
119
166
294
408
532
215
300
532
741
968
LIQUID CAPACITY CORRECTION FACTORS
Tons psi °F ■
0°
1.12
kW bar °C
■
LIQUID TEMPERATURE (°F)
10°
20°
30°
CORRECTION FACTOR, LIQUID CAPACITY RATING
1.06
1.00
0.94
■
■
40°
-15°
LIQUID TEMPERATURE (°C)
-10°
-5°
0°
CORRECTION FACTOR, LIQUID CAPACITY RATING
0.88
1.11
1.05
1.00
0.94
5°
0.88
Page 28 — CATALOG 744
ELECTRIC VALVES
CO2
ELECTRIC PRESSURE REGULATING VALVES
TYPE GC AND FGB FOR TRANSCRITICAL CO2
The Sporlan GC and FGB
valve families are stepper
motor driven pressure regulating valves designed specifically for transcritical CO2
(R-744) refrigeration systems.
The GC family is designed for
application as a Gas Cooler
valve, but can also be applied
as a Flash Gas Bypass valve.
The FGB family is designed to extend the capacity range of the GC
valves when applied as Flash Gas Bypass valves. Both families are
rated for 2030 psi (140 bar) maximum working pressure. Offered with
a PSD4 Interface Board and PSS4B Backup Power Module, the GC/
FGB valves are easy to implement.
FEATURES
■
High resolution actuators with 2500 steps
■ Uniquely characterized pin and port combinations for
excellent low flow control
■ Cartridge valve designs with interchangeable bodies
■ Tight seating capability
■ Replaceable / serviceable screens
For more information on Sporlan Transcritical CO2 valves, including
sizing information for Flash Gas Bypass applications, please refer to
Bulletin 100-80.
GAS COOLER VALVE CAPACITIES
Tons psi °F ■
kW bar °C
■
TYPE
Cv US
GC-10
GC-20
GC-30
GC-40
GC-50
0.19
0.55
1.69
3.24
4.80
■
51°F
59°F
100°F
ALLOWABLE PRESSURE DROP ACROSS VALVE – psi(g)
650
725
1450
9.5
6.2
6.6
21.6
14.1
16.6
80.2
52.5
61.9
154
101
111
226
148
163
■
TYPE
Kv
GC-10
GC-20
GC-30
GC-40
GC-50
0.16
0.48
1.46
2.80
4.15
10°C
15°C
38°C
ALLOWABLE PRESSURE DROP ACROSS VALVE – bar(g)
44
50
100
35.5
21.9
23.3
75.8
49.6
58.4
282
185
218
542
355
390
795
520
572
CATALOG 744 — Page 29
ELECTRONIC CONTROLLERS
CO2
ELECTRIC VALVE INTERFACE BOARDS
TYPE IB
The Sporlan IB series Interface Boards are designed to translate a
0-10V or 4-20mA signal from an externally supplier controller into
a proportional valve position. This signal can correlate to pressure,
temperature, superheat or any other system variable that is being
controlled by an electric valve. This is the most straightforward
implementation of Sporlan SER or CDS valves using third party
controllers, without the setup and qualification required to ensure
reliable valve response. The 3” (76.2 mm)
square board can be mounted using nonmetallic standoffs, or with the supplied
snap-track.
For more information on Sporlan Interface
Boards, please refer to Bulletin 100-50-2.
ELECTRIC VALVE CONTROLS
TYPE KELVIN II
Sporlan offers a variety of standalone electric valve controls, each
targeted at precise control of a refrigeration or air conditioning system parameter. Utilizing unique control algorithms, the Kelvin II
Series of controls features flexibility for a variety of applications, and
can be paired with the proper Sporlan subcritical CO2 Electric Valve
to meet the system requirements. The controls also feature RS-485
communications to enable remote monitoring, or to tie into a higher
level system controller.
For more information on Sporlan Kelvin II Series of controls, please
refer to Bulletin 100-50-5, or the I/O Manuals in the 100-50-5 series.
ELECTRIC VALVE SERVICE TOOL
TYPE SMA-12
The Sporlan SMA-12 (Stepper Motor Actuator) is
a service tool designed to help diagnose systems
with Electric Valves by verifying proper operation of the stepper motor. The unit is powered
by two 9V alkaline batteries, and will power any
SER or CDS 12VDC bipolar stepper motor valve.
The step rate is selectable at 1, 50, 100 or 200
steps per second, and will stroke the valve in both
the opening and closing directions. Red LEDs
indicate continuity of the motor windings and
battery power, and binding posts are provided for quick connection
of valve cables. In the event of a controller failure, the SMA-12 can
be used to manually position a valve to maintain performance until
service can be completed. The SMA-12 is the basic troubleshooting
tool for Electric Valve operated systems.
ITEM NUMBER
DESCRIPTION
CONNECTOR
953276
SMA-12
Binding Post
953277
SMA-12 w/Pigtail
Delphi Packard Weather Pack,
12034342
953229
SMA-12 w/Pigtail
Phoenix Contact 1803442
REFRIGERATION CONTROLLERS
TYPE PSK
Sporlan PSK electronic controllers manage low and medium temperature self contained refrigeration
units by controlling compressors,
defrost, lights and fans. There are several models to choose from,
ranging from simple logic and wiring (for base compressor and
defrost control) to models with multiple I/O and evaporator fan management (for complex compressor, defrost and fan control).
For more information on Sporlan PSK Refrigeration Controllers,
please refer to Form 100-359, or the I/O Manuals in the 100-50-6
series.
Page 30 — CATALOG 744
OIL LEVEL CONTROL SYSTEM
Sporlan’s Oil Level Control System Components were developed to
offer the refrigeration industry an oil level control system of the highest quality. The heart of the system is the Oil Level Control which
when matched with the Oil Reservoir and Oil Differential Check
Valve maintains a minimum oil level in the compressor crankcase
during all phases of system operation.
OIL RESERVOIRS
Sporlan oil reservoirs are holding vessels for stand-by
oil necessary for the operation of a commercial refrigeration or air conditioning system. The oil reservoir is
shipped with service valves so the vessel can be isolated from the rest of the system.
FEATURES AND BENEFITS
■ 
■ 
■ 
■ 
for oil level monitoring
3/8” male flare rotalock valves shipped
with oil reservoir allow for easy adjustment when piping into system
3/8” male flare vent port – for connection
to the suction line
Type POR
Mounting studs and brackets
Powder coating passes 500 hour ASTM salt spray
UL Listed SORT/SORT7 for the USA and Canada with a
Maximum Rated Pressure (MRP) of 500 psi (34 bar)
MODEL
N0.
POR-2
POR-3
POR-4
OIL DIFFERENTIAL CHECK VALVE
TYPES OCV-5, -10, -20 and -30
The Sporlan Oil Level Differential Check Valve (OCV) is installed
on the 3/8” SAE fitting on top of the OR-1-1/2, and allows pressure to
be relieved from the reservoir to the suction as required to maintain a
pressure in the reservoir at a preset level above the suction pressure.
The pressure differential created by the OCV assures oil flow from
the reservoir to the Oil Level Control providing there is adequate oil
in the reservoir.
The OCV will only relieve pressure from the reservoir in excess of its
fixed set point. Systems with fluctuating suction pressure as a result of
compressor unloaders, staging or other suction line controls must be
fitted with an OCV with a differential greater than the suction pressure fluctuation to assure oil flow from the oil reservoir through the
oil level control to the compressor crankcase.
■  High flow capacity
■  Corrosion resistant coating on shell
■  Sightglass ports with float ball indicators
■ 
CO2
TOTAL
‘A’
‘B’
NUMBER
SHELL
CAPACITY CAPACITY CAPACITY of SIGHT- LENGTH
DIAMETER
Inches
Gallons
Gallons
Gallons GLASSES
Inches
2
3/4
3/4
2
18
6.0
3
3/4
1-1/2
3
23
6.0
4
3/4
2-3/4
3
36
6.0
‘A’ capacity is the capacity to the first sightglass.
‘B’ capacity is the capacity between the two sightglasses for the POR-2 and the top
and bottom sightglasses for the POR-3 and POR-4.
Sporlan offers OCVs with a 5, 10, 20 and 30 psi fixed differential setting. However, Sporlan recommends the use of an OCV-20 or OCV30 on all field built up applications.
OIL LEVEL CONTROLS
The purpose of the Sporlan Oil Level Control is to regulate the flow of oil to the compressor crankcase to maintain a minimum
oil level as specified by the compressor
manufacturer for any given application.
The Oil Level Control is adjustable between 1/2 sightglass and 1/4 sightglass at
any pressure differential between 5 and 90
psid. As the level of oil is lowered in the
compressor crankcase by being pumped
out, the float of the Oil Level Control is
lowered and opens a needle valve allowing oil to flow from the oil reservoir to the
compressor crankcase.
OL-60FH
UL Recognized under
SA5460-SFJQ2/SFJQ8
with a Maximum Rated
Pressure (MRP) of 650
psi (45 bar).
OIL LEVEL CONTROLS – SELECTION AND SPECIFICATIONS
MODEL NUMBER
PRODUCT TYPE
FLANGE TYPE
COMPRESSOR MANUFACTURER and MODEL
90 psi Max
Differential
7 bolt hole
universal
flange
See page 31 for compressor
adaptor requirements.
CONFIGURATION TOP VIEW
OL-60CH
OL-60XH
OL-60FH
OL-60HH-6
OL-60NH-2
S-OL
Sightglass
Included with adaptor kits on page 31 (except AOL-R)
or may be purchased separately.
UL Listed under SFJQ-SA5460 with a Maximum Rated Pressure (MRP) of 650 psi (44.8 barg).
For complete information see your Sporlan Wholesaler, our website at www.sporlanonline.com, or write Sporlan and request Bulletins 110-10 and 110-11.
CATALOG 744 — Page 31
OIL LEVEL CONTROL SYSTEM
CO2
COMPRESSOR ADAPTOR REQUIREMENTS
COMPRESSOR
MODEL
NUMBER
COMPRESSOR
MANUFACTURER
COMPRESSOR
ATTACHMENT
PATTERN
SPORLAN
ADAPTOR
KIT NUMBER
SEALING
METHOD
SIGHTGLASS
2KC, 2JC, 2HC, 2GC, 2
FC, 2EC, 2DC, 2CC, 4FC,
4EC, 4DC, 4CC
1-1/8” Thread
AOL-MA/TE
Use seal provided
Use sightglass provided
with adaptor
4VC, 4TC, 4PC, 4NC
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
None
Use seal provided
Use sightglass from
compressor
4J, 4H, 4G, 6J, 6H, 6G,
6F
4 Bolt, 50 mm B.C.
None
Use seal provided with
control
Use sightglass from
compressor
8GC, 8FC
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1
Use seal provided
Use sightglass from
compressor
F...
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1
Use seal provided
Use sightglass from
compressor
06EA, 06ER
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1
06DA, 06DR, 5F, 5H
1-1/2” – 18 Thread
AOL-C
Over 5 Ton
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1
Use seal provided
Use sightglass from
compressor
Under 5 HP Q
1-1/8” – 12 Thread
AOL-A
Use seal from
compressor
Use sightglass provided
with adaptor
8R, 3D Front,
2D, 4D, 6D
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1
Use seal provided
Use sightglass from
compressor
8D
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
Use control with standard length arms with AOL-R-1 adaptor.
Use sightglass from compressor
Dorin
4 cyc-15 HP
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
Dunham-Bush
Big 4
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1
Use seal provided
Use sightglass from
compressor
Frascold
All models
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1
Use seal provided
Use sightglass from
compressor
Maneurop
MT..., LT...
1-1/8” – 18 Thread
AOL-MA/TE
Use seal provided
Use sightglass provided
with adaptor
P, R, S, PA, RA, SA, CK,
CM, CH, CG
1-1/8” – 12 Thread
AOL-A
Use seal from
compressor
—
1-1/8” – 18 Thread
AOL-MA/TE
Use seal provided
VS
3/4” – 14 Thread
AOL-K-1
Use seal provided
M, R
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1
Use seal provided
Use sightglass from
compressor
K
3/4” NPT
AOL-K-1
Use Teflon tape
Use sightglass provided
with adaptor
GC, GS, JS
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1
Use seal provided
Use sightglass from
compressor
Bitzer
Bock
Carrier
Copeland
Tecumseh
Trane
York
Use seal provided
Use sightglass from
compressor
Use sightglass provided
with adaptor
Contact Sporlan
Use sightglass provided
with adaptor
NOTE: Shipping weight is 4 lbs. (1.8 Kg) for oil level controls and 1 lb. (0.45 Kg) for adaptors.
Q Some compressor models have a smaller diameter port than the arm diameter of the oil level control. This situation can mislead the control in the amount of oil that is actually in
the compressor. It is advisable the selection and adjustment of the control be reviewed in this situation.
For complete information see your Sporlan Wholesaler, our website at www.sporlanonline.com, or write Sporlan and request Bulletins 110-10 and 110-11.
Page 32 — CATALOG 744
OIL LEVEL CONTROL SYSTEM
CO2
SERIES OIL FILTERS
DESIGN BENEFITS
The Sporlan Catch-All or SF-283-F Suction Filter has been used for
many years as an oil filter in refrigeration rack systems with mineral
or alkylbenzene oil.
■  Virtually eliminates the need for
oil changes due to suspended
particulate in circulation
With the use of the new polyolester (POE) oils, system chemistry
changed. Unlike mineral and alkylbenzene oils, POE oil has solventlike tendencies. POE oil has the ability to suspend and recirculate
small, solid contaminants left from system installation or retrofit.
Analysis of POE oil samples taken from actual systems have shown
the oil to suspend and recirculate a high concentration of 2-20 micron
sized particles, with the largest percentage between 2-10 microns. Although some particles are smaller than bearing tolerances, studies
have shown bearing life can still be affected. Bearing wear depends
upon the size, hardness, and concentration of particles in circulation.
To effectively remove these small particles, Sporlan developed a new
type of oil filter.
■  Unsurpassed filtering efficiency
99% removal of 3 micron sized
particles
98% removal of 2 micron sized
particles
■  Element utilizes a pleated design
C
for maximum surface area
US
LISTED
■  Unsurpassed filtration capacities
■  High flow capacities with low pressure drop
■  Filter element utilizes an O-ring seal
■  Inert microglass filter material ensures lubricant
compatibility
■  Dimensions allow for easy replacement of current
filter
■  UL Listed under SA1756-SMGT/SMGT7 for the USA
and Canada with a Maximum Rated Pressure (MRP) of
650 psi (45 bar)
The OF Series Oil Filters are designed to be 99% efficient in removing 3 micron sized particles and yet have sufficient flow capacity at
a low pressure drop. The unsurpassed filtration ability of the oil filters will assure clean POE, mineral or alkylbenzene oil is returned to
the compressors. Clean oil ensures proper operation of the oil level
control and minimizes compressor wear. The Sporlan OF Series Oil
Filters were designed to virtually eliminate the need for oil changes
resulting from suspended solid contaminants in circulation.
SPECIFICATIONS
UNIT
OF-303
OF-303-BP
OF-303-T
ROF-413-T
DESCRIPTION
Oil Filter
Oil Filter with
Bypass Feature
Oil Filter with
Access Fitting
Replaceable
Oil Filter
CONNECTIONS
FILTERING AREA
Square Inches
(Square cm)
OVERALL
LENGTH
Inches (mm)
SHELL
DIAMETER
Inches (mm)
UL RATED
WORKING
PRESSURE
psi (bar)
9.69 (246)
3/8” SAE Flare
Field Support
325
(2100)
10.63 (270)
3.00 (76)
9.62 (244)
8.77 (223)
3.50 (89)
Note: The OF Series Oil Filters are not suitable for use on ammonia systems.
For complete information see your Sporlan Wholesaler, our website at www.sporlanonline.com, or write Sporlan and request Bulletin 110-10.
650
(45)
CATALOG 744 — Page 33
CO2
PRESSURE TEMPERATURE CHART
REFRIGERANT 744
At Sea Level
psig
barg
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
205
210
220
230
240
250
260
275
290
305
5.5
5.9
6.2
6.6
6.9
7.2
7.6
7.9
8.3
8.6
9.0
9.3
9.7
10.0
10.3
10.7
11.0
11.4
11.7
12.1
12.4
12.8
13.1
13.4
13.8
14.1
14.5
15.2
15.9
16.5
17.2
17.9
19.0
20.0
21.0
At Altitude – 5,000 ft. (1,524 m) Above Sea Level
Temperature
°F
°C
-59.9
-51.1
-57.7
-49.8
-55.5
-48.6
-53.4
-47.4
-51.3
-46.3
-49.4
-45.2
-47.5
-44.1
-45.6
-43.1
-43.8
-42.1
-42.0
-41.1
-40.3
-40.2
-38.7
-39.3
-37.0
-38.4
-35.5
-37.5
-33.9
-36.6
-32.4
-35.8
-30.9
-35.0
-29.5
-34.1
-28.0
-33.4
-26.6
-32.6
-25.3
-31.8
-23.9
-31.1
-22.6
-30.3
-21.3
-29.6
-20.1
-28.9
-18.8
-28.2
-17.6
-27.5
-15.2
-26.2
-12.9
-24.9
-10.6
-23.7
-8.4
-22.4
-6.3
-21.3
-3.2
-19.5
-0.2
-17.9
2.7
-16.3
psig
barg
320
335
350
365
380
400
420
440
460
480
500
525
550
575
600
625
650
675
700
725
750
775
800
825
850
875
900
925
950
975
1000
22.1
23.1
24.1
25.2
26.2
27.6
29.0
30.3
31.7
33.1
34.5
36.2
37.9
39.6
41.4
43.1
44.8
46.5
48.3
50.0
51.7
53.4
55.2
56.9
58.6
60.3
62.1
63.8
65.5
67.2
68.9
Temperature
°F
°C
5.4
-14.8
8.1
-13.3
10.7
-11.8
13.3
-10.4
15.7
-9.0
18.9
-7.3
21.9
-5.6
24.9
-3.9
27.8
-2.4
30.5
-0.8
33.2
0.7
36.5
2.5
39.6
4.2
42.7
5.9
45.6
7.6
48.5
9.2
51.3
10.7
54.0
12.2
56.6
13.7
59.2
15.1
61.7
16.5
64.1
17.8
66.5
19.2
68.8
20.4
71.1
21.7
73.3
22.9
75.4
24.1
77.5
25.3
79.6
26.4
81.6
27.6
83.6
28.7
psig
barg
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
205
210
220
230
240
250
260
275
290
305
5.5
5.9
6.2
6.6
6.9
7.2
7.6
7.9
8.3
8.6
9.0
9.3
9.7
10.0
10.3
10.7
11.0
11.4
11.7
12.1
12.4
12.8
13.1
13.4
13.8
14.1
14.5
15.2
15.9
16.5
17.2
17.9
19.0
20.0
21.0
Temperature
°F
°C
-61.1
-51.7
-58.8
-50.4
-56.6
-49.2
-54.4
-48.0
-52.3
-46.9
-50.3
-45.7
-48.4
-44.7
-46.5
-43.6
-44.7
-42.6
-42.9
-41.6
-41.2
-40.7
-39.5
-39.7
-37.8
-38.8
-36.2
-37.9
-34.7
-37.0
-33.1
-36.2
-31.6
-35.4
-30.2
-34.5
-28.7
-33.7
-27.3
-33.0
-25.9
-32.2
-24.6
-31.4
-23.3
-30.7
-22.0
-30.0
-20.7
-29.3
-19.4
-28.6
-18.2
-27.9
-15.8
-26.5
-13.4
-25.2
-11.1
-24.0
-8.9
-22.7
-6.8
-21.6
-3.7
-19.8
-0.7
-18.2
2.2
-16.6
psig
barg
320
335
350
365
380
400
420
440
460
480
500
525
550
575
600
625
650
675
700
725
750
775
800
825
850
875
900
925
950
975
1000
22.1
23.1
24.1
25.2
26.2
27.6
29.0
30.3
31.7
33.1
34.5
36.2
37.9
39.6
41.4
43.1
44.8
46.5
48.3
50.0
51.7
53.4
55.2
56.9
58.6
60.3
62.1
63.8
65.5
67.2
68.9
Temperature here reads
OBTAIN SUCTION PRESSURE
200 psig (13.8 barg) at bulb
-10°F (-23°C)
– -20°F (-29°C)
10°F (5.5°C)
SUPERHEAT
Example: Refrigerant 744 at Sea Level
Temperature
°F
°C
5.0
-15.0
7.7
-13.5
10.3
-12.0
12.9
-10.6
15.3
-9.3
18.5
-7.5
21.6
-5.8
24.5
-4.1
27.4
-2.5
30.2
-1.0
32.9
0.5
36.2
2.3
39.3
4.1
42.4
5.8
45.4
7.4
48.2
9.0
51.0
10.6
53.7
12.1
56.4
13.5
58.9
15.0
61.4
16.4
63.9
17.7
66.3
19.0
68.6
20.3
70.8
21.6
73.1
22.8
75.2
24.0
77.3
25.2
79.4
26.3
81.4
27.5
83.4
28.6
Page 34 — CATALOG 744
OFFER OF SALE
The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors
(“Seller”) are hereby offered for sale at prices to be established by Seller. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following
Terms and Conditions. Buyer’s order for any item described in its document, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer.
All goods, services or work described will be referred to as “Products”.
1. Terms and Conditions. Seller’s willingness to offer
Products, or accept an order for Products, to or from
Buyer is subject to these Terms and Conditions or
any newer version of the terms and conditions found
on-line at www.parker.com/saleterms/. Seller objects
to any contrary or additional terms or conditions of
Buyer’s order or any other document issued by Buyer.
2. Price Adjustments; Payments. Prices stated
on Seller’s quote or other documentation offered by
Seller are valid for 30 days, and do not include any
sales, use, or other taxes unless specifically stated.
Unless otherwise specified by Seller, all prices are
F.C.A. Seller’s facility (INCOTERMS 2010). Payment
is subject to credit approval and is due 30 days from
the date of invoice or such other term as required by
Seller’s Credit Department, after which Buyer shall
pay interest on any unpaid invoices at the rate of
1.5% per month or the maximum allowable rate under
applicable law.
3. Delivery Dates; Title and Risk; Shipment. All
delivery dates are approximate and Seller shall not
be responsible for any damages resulting from any
delay. Regardless of the manner of shipment, title to
any products and risk of loss or damage shall pass
to Buyer upon placement of the products with the
shipment carrier at Seller’s facility. Unless otherwise
stated, Seller may exercise its judgment in choosing
the carrier and means of delivery. No deferment of
shipment at Buyers’ request beyond the respective
dates indicated will be made except on terms that will
indemnify, defend and hold Seller harmless against all
loss and additional expense. Buyer shall be responsible for any additional shipping charges incurred by
Seller due to Buyer’s acts or omissions.
4. Warranty. Seller warrants that the Products sold
hereunder shall be free from defects in material or
workmanship for a period of twelve months from the
date of delivery to Buyer or 2,000 hours of normal
use, whichever occurs first. The prices charged
for Seller’s products are based upon the exclusive
limited warranty stated above, and upon the following
disclaimer: DISCLAIMER OF WARRANTY: THIS
WARRANTY COMPRISES THE SOLE AND ENTIRE
WARRANTY PERTAINING TO PRODUCTS PROVIDED HEREUNDER. SELLER DISCLAIMS ALL
OTHER WARRANTIES, EXPRESS AND IMPLIED,
INCLUDING DESIGN, MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
5. Claims; Commencement of Actions. Buyer
shall promptly inspect all Products upon delivery. No
claims for shortages will be allowed unless reported
to the Seller within 10 days of delivery. No other
claims against Seller will be allowed unless asserted
in writing within 30 days after delivery. Buyer shall
notify Seller of any alleged breach of warranty within
30 days after the date the defect is or should have
been discovered by Buyer. Any action based upon
breach of this agreement or upon any other claim
arising out of this sale (other than an action by Seller
for an amount due on any invoice) must be commenced within 12 months from the date of the breach
without regard to the date breach is discovered.
6. LIMITATION OF LIABILITY. UPON NOTIFICATION,
SELLER WILL, AT ITS OPTION, REPAIR OR REPLACE
A DEFECTIVE PRODUCT, OR REFUND THE PURCHASE PRICE. IN NO EVENT SHALL SELLER BE
LIABLE TO BUYER FOR ANY SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF, OR AS THE RESULT OF, THE
SALE, DELIVERY, NON-DELIVERY, SERVICING,
USE OR LOSS OF USE OF THE PRODUCTS OR
ANY PART THEREOF, OR FOR ANY CHARGES
OR EXPENSES OF ANY NATURE INCURRED
WITHOUT SELLER’S WRITTEN CONSENT, EVEN
IF SELLER HAS BEEN NEGLIGENT, WHETHER IN
CONTRACT, TORT OR OTHER LEGAL THEORY. IN
NO EVENT SHALL SELLER’S LIABILITY UNDER
ANY CLAIM MADE BY BUYER EXCEED THE PURCHASE PRICE OF THE PRODUCTS.
7. User Responsibility. The user, through its own
analysis and testing, is solely responsible for making
the final selection of the system and Product and
assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects
of the application and follow applicable industry
standards and Product information. If Seller provides
Product or system options, the user is responsible
for determining that such data and specifications are
suitable and sufficient for all applications and reasonably foreseeable uses of the Products or systems.
8. Loss to Buyer’s Property. Any designs, tools,
patterns, materials, drawings, confidential information
or equipment furnished by Buyer or any other items
which become Buyer’s property, will be considered
obsolete and may be destroyed by Seller after two
consecutive years have elapsed without Buyer ordering the items manufactured using such property.
Seller shall not be responsible for any loss or damage
to such property while it is in Seller’s possession or
control.
9. Special Tooling. A tooling charge may be imposed
for any special tooling, including without limitation,
dies, fixtures, molds and patterns, acquired to manufacture Products. Such special tooling shall be and
remain Seller’s property notwithstanding payment of
any charges by Buyer. In no event will Buyer acquire
any interest in apparatus belonging to Seller which
is utilized in the manufacture of the Products, even
if such apparatus has been specially converted or
adapted for such manufacture and notwithstanding
any charges paid by Buyer. Unless otherwise agreed,
Seller shall have the right to alter, discard or otherwise
dispose of any special tooling or other property in its
sole discretion at any time.
10. Buyer’s Obligation; Rights of Seller. To secure
payment of all sums due or otherwise, Seller shall
retain a security interest in the goods delivered and
this agreement shall be deemed a Security Agreement under the Uniform Commercial Code. Buyer
authorizes Seller as its attorney to execute and file on
Buyer’s behalf all documents Seller deems necessary
to perfect its security interest.
11. Improper use and Indemnity. Buyer shall indemnify, defend, and hold Seller harmless from any claim,
liability, damages, lawsuits, and costs (including
attorney fees), whether for personal injury, property
damage, patent, trademark or copyright infringement
or any other claim, brought by or incurred by Buyer,
Buyer’s employees, or any other person, arising out
of: (a) improper selection, improper application or
other misuse of Products purchased by Buyer from
Seller; (b) any act or omission, negligent or otherwise,
of Buyer; (c) Seller’s use of patterns, plans, drawings,
or specifications furnished by Buyer to manufacture
Product; or (d) Buyer’s failure to comply with these
terms and conditions. Seller shall not indemnify
Buyer under any circumstance except as otherwise
provided.
12. Cancellations and Changes. Orders shall not
be subject to cancellation or change by Buyer for
any reason, except with Seller’s written consent and
upon terms that will indemnify, defend and hold Seller
harmless against all direct, incidental and consequential loss or damage. Seller may change product
features, specifications, designs and availability with
notice to Buyer.
13. Limitation on Assignment. Buyer may not assign
its rights or obligations under this agreement without
the prior written consent of Seller.
14. Force Majeure. Seller does not assume the risk
and shall not be liable for delay or failure to perform
any of Seller’s obligations by reason of circumstances
beyond the reasonable control of Seller (hereinafter
“Events of Force Majeure”). Events of Force Majeure
shall include without limitation: accidents, strikes or
labor disputes, acts of any government or government
agency, acts of nature, delays or failures in delivery
from carriers or suppliers, shortages of materials, or
any other cause beyond Seller’s reasonable control.
15. Waiver and Severability. Failure to enforce any
provision of this agreement will not waive that provision nor will any such failure prejudice Seller’s right
to enforce that provision in the future. Invalidation of
any provision of this agreement by legislation or other
rule of law shall not invalidate any other provision
herein. The remaining provisions of this agreement
will remain in full force and effect.
16. Termination. Seller may terminate this agreement
for any reason and at any time by giving Buyer thirty
(30) days written notice of termination. Seller may
immediately terminate this agreement, in writing,
if Buyer: (a) commits a breach of any provision of
this agreement (b) appointments a trustee, receiver
or custodian for all or any part of Buyer’s property
(c) files a petition for relief in bankruptcy on its own
behalf, or by a third party (d) makes an assignment for
the benefit of creditors, or (e) dissolves or liquidates
all or a majority of its assets.
17. Governing Law. This agreement and the sale and
delivery of all Products hereunder shall be deemed
to have taken place in and shall be governed and
construed in accordance with the laws of the State of
Ohio, as applicable to contracts executed and wholly
performed therein and without regard to conflicts
of laws principles. Buyer irrevocably agrees and
consents to the exclusive jurisdiction and venue of the
courts of Cuyahoga County, Ohio with respect to any
dispute, controversy or claim arising out of or relating
to this agreement.
18. Indemnity for Infringement of Intellectual
Property Rights. Seller shall have no liability for
infringement of any patents, trademarks, copyrights,
trade dress, trade secrets or similar rights except as
provided in this Section. Seller will defend and indemnify Buyer against allegations of infringement of U.S.
patents, U.S. trademarks, copyrights, trade dress and
trade secrets (“Intellectual Property Rights”). Seller
will defend at its expense and will pay the cost of any
settlement or damages awarded in an action brought
against Buyer based on an allegation that a Product
sold pursuant to this Agreement infringes the Intellectual Property Rights of a third party. Seller’s obligation to defend and indemnify Buyer is contingent on
Buyer notifying Seller within ten (10) days after Buyer
becomes aware of such allegations of infringement,
and Seller having sole control over the defense of any
allegations or actions including all negotiations for
settlement or compromise. If a Product is subject to a
claim that it infringes the Intellectual Property Rights
of a third party, Seller may, at its sole expense and
option, procure for Buyer the right to continue using
the Product, replace or modify the Product so as to
make it noninfringing, or offer to accept return of the
Product and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the
foregoing, Seller shall have no liability for claims of
infringement based on information provided by Buyer,
or directed to Products delivered hereunder for which
the designs are specified in whole or part by Buyer,
or infringements resulting from the modification,
combination or use in a system of any Product sold
hereunder. The foregoing provisions of this Section
shall constitute Seller’s sole and exclusive liability and
Buyer’s sole and exclusive remedy for infringement of
Intellectual Property Rights.
19. Entire Agreement. This agreement contains the
entire agreement between the Buyer and Seller and
constitutes the final, complete and exclusive expression of the terms of sale. All prior or contemporaneous written or oral agreements or negotiations with
respect to the subject matter are herein merged.
20. Compliance with Law, U. K. Bribery Act and
U.S. Foreign Corrupt Practices Act. Buyer agrees
to comply with all applicable laws and regulations,
including both those of the United Kingdom and
the United States of America, and of the country or
countries of the Territory in which Buyer may operate,
including without limitation the U. K. Bribery Act, the
U.S. Foreign Corrupt Practices Act (“FCPA”) and the
U.S. Anti-Kickback Act (the “Anti-Kickback Act”), and
agrees to indemnify and hold harmless Seller from the
consequences of any violation of such provisions by
Buyer, its employees or agents. Buyer acknowledges
that they are familiar with the provisions of the U. K.
Bribery Act, the FCPA and the Anti-Kickback Act,
and certifies that Buyer will adhere to the requirements thereof. In particular, Buyer represents and
agrees that Buyer shall not make any payment or give
anything of value, directly or indirectly to any governmental official, any foreign political party or official
thereof, any candidate for foreign political office, or
any commercial entity or person, for the purpose
of influencing such person to purchase products or
otherwise benefit the business of Seller.
© 2015 Parker Hannifin Corporation
Catalog 744 / 32015
Parker Hannifin Corporation
Sporlan Division
206 Lange Drive • Washington, MO 63090 USA
phone 636 239 1111 • fax 636 239 9130
www.sporlanonline.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising