Yazoo/Kees | KKW36141 | ELECTRICAL / IGNITION BANTA SPARK PLUGS E E 24 - 01

ELECTRICAL / IGNITION BANTA SPARK PLUGS E E 24 - 01
BANTA
ELECTRICAL / IGNITION
SPARK PLUGS
Part#
Champion#
Bosch
NGK
Nippondenso Autolite
AC
Application
690-300
CJ7Y
WS8F
BPM7A
W22MP-U
2974
CS42S
690-301
J19LM
W9EO
B2-LM
W14LM-U
458
----
Newer Briggs & Tecumseh
690-302
CJ8 / CJ11
WS8E
BM6A
W20M-U
2995
CS41
Briggs, Echo, Poulan
690-303
RC12YC
FR8DC
BCPR5ES
Q16PR-U11
5224
FR2LSK
690-304
DJ8J
HS8E
BM6F
WA20M-U
2956
CS45T
Homelite, McCulloch & others
690-305
RJ19LM
W7AC
BR2-LM
W14LM-U
414
----
Briggs and Tecumseh
690-306
RCJ8
----
BMR6A
BMR4A
W20MR-U
245
----
690-307
RCJ6Y
WSR5F
BPMR7A
W22MP-U
----
----
690-308
CJ6 / CJ4
WS7E
BM7A
W22M-U
254
CS40
For Chain Saws & Trimmers
690-309
CJ8Y
WS7F
BPM6A
W20MP-U
2976
----
Echo, John Deere and others.
690-310
N11YC
W8DC
BP5ES
W16EP-U
54
----
Honda GVX120 and GSX270
690-311
CJ6Y
WS5F
BPM7A
W22MP-U
----
----
690-312
RN9YC
----
BPR6ES
W20ETR-S
3923
----
690-313
J17LM
W9ECO B4LM
W14LM-U
295
----
690-314
RN11YC4
WR8DS BPR5ES
W16EPR-U
W16EXR-U
54
----
690-315
N9YC
W6D
BP6ES
W20EX-U
4253
----
690-316
DJ6J
HS5E
BM7F
T22MU
2954
----
690-317
J8C
W8E
B6S
W16S-U
294
----
690-318
DJ7Y
HS8E
BPM6F
WA20M-U
2956
----
690-319
RCJ8Y
----
BPMR4A
W14PR-UID
----
----
690-320
RL95YC
W8B
BP4HS
W16FPU
516
----
690-321
L86C
W8A
B6HS
W22FSU
415
----
690-323
N2C
W2C
B8ES
W22ESL
2616 (NZC) - - -
690-324
NEW
RCJ7Y
WSR9E BPMR4A
W14MPR-410
----
E
24 - 01
----
Alpina, Caster, Dynamark,
Husqvarna, Jonsereds,
Lombard, Olympyk, Solo - saws
Briggs Vanguard
and Kohler Command
Fits most single cylinder
Briggs & Kawasaki 12.5 Hp
Resistor plug for
Tecumseh TC300
Kawasaki TEX54
and Tecumseh TCH300
Honda OHC Horiz. & vert.,
Robin 8.5 thru 25 Hp EH & EHV
Tecumseh HM70 thru HM100
AV520, AV600, TC300
Honda OHV GX120 - 670 and
GVX50 - 620, Kawasaki OHV FC150V, FC180V and others.
Honda OHV Horiz. & vert
Robin 8.5 thru 25 Hp EH & EHV
Homelite Mini models, Super
E-Z & EZ-AO, McCulloch
5-10A, MAC 10 series & others.
Tecumseh HH100, HH120,
HH60, HH70, HH80 and others.
Homelite 180, 192, 200 all
models, CS40, DM40, LX30,
McCulloch Eager
Tecumseh Horiz. 2-cycle,
Snow King up to 5 Hp & others.
Honda 10 Hp G400
Honda 4.0, 40, G40, G41,
G42, 6.5 Hp G65, GS65,
Wisconsin OHV,
Tecumseh OVM 120.
Snowmobile - Ski Doo, Yamaha
Alpina, Castor, Noma/Dynamark
Husqvarna, Jonsereds, Solo,
Lombard, Olympyk, Oleo-Mac
Chain Saws
E
BANTA
ELECTRICAL / IGNITION
UNIVERSAL
Part#
OEM#
Application
751-222
MTD# 725-0119
Noma# 39463
Universal Ammeter - 15 amp gauge that can be used
with 6, 12 or 24 volt equipment. Used on many Riders
and Lawn Tractors. OEM style with a quality chrome
bezel. Includes: mounting bracket and hardware.
Part#
Length
Colour Stud Size
425-041
8”
Black
5/16”, 3/8”
425-215
8”
Red
5/16”, 3/8”
425-058
12”
Black
5/16”, 3/8”
425-223
425-066
425-231
425-074
425-249
12”
Red
5/16”, 3/8”
16”
Black
5/16”, 3/8”
16”
Red
5/16”, 3/8”
20”
Black
5/16”, 3/8”
20”
Red
5/16”, 3/8”
425-033
10 ft
Black
6 gauge
425-264
10 ft
Red
6 gauge
Part#
Size
Application
425-124
1/4”
425-207
3/8”
Battery Terminal Ends - Lead dipped for corrosion resistance.
Open conductive brass lugs. For 6 - 2 gauge battery cable.
Use with our 425-033 and 425-264 6 gauge battery cable.
Application
Battery Cables - 300 volt, 6 gauge
“all copper conductor” cable.
Poly-vinyl insulation
Resistant to grease, oil and
gasoline. Heavy duty - corrosion
resistant terminal ends.
Battery Cable (10 FT) - 300 volt,
6 gauge “all copper conductor” cable.
Poly-vinyl insulation
Resistant to grease, oil, gasoline.
(Sold in multiples of 10)
425-116
425-039
Universal
Universal Battery Terminal - Fits 6 thru 2 gauge battery cable.
Universal lead terminal will fit all top post batteries.
Universal Battery Hold Downs - Includes: bolt, washer & wing nut.
Overall Length: 8”, threaded 4-1/2”.
Use with our 425-038 “Universal adjustable battery hold downs”.
(Priced and Sold in sets)
425-038
Universal Adjustable Battery Hold Downs - Use with our 425-039
“Battery hold down bolt”. (Priced and Sold in sets)
440-065
NOVA IGNITION MODULE - Already in use by O.E.M.’s as standard ignition
in their units. Maintenance free / easily installed / quick and easy starting.
Operates well in any weather conditions and completely waterproof. Highly
reliable / durable construction / high performance. Anti-kickback system
/ die cast aluminum housing. Widely used in 2 and 4 cycle gasoline
engines as in Lawnmowers, generators, pumps, cultivators, tillers, compact
garden tractors, chain saws, brushcutters, dusters, trimmers, go-carts, blowers
etc. The NOVA module is suitable for 2 leg and 3 leg ignition coils in single
cylinder engines. This module is not recommended for use on engines
equipped with battery ignition or flywheels with multiple magnets.
E
24 - 02
E
BANTA
ELECTRICAL / IGNITION
ATOM IGNITION MODULES / MINI-TRONS
Part#
OEM# Application
440-209
440-205
AM-205 Green Mini-tron - Fits all single cylinder Briggs and Stratton
engines as used in Lawnmowers, cultivators, pumps, generators,
snowblowers, Ride-on Mowers, compact garden tractors, etc. Also
replaces magnetron transistor ignition. (For twin cylinder Briggs
engines use our 440-209 module.
440-207
AM-207 Blue Mini-tron - Fits Outdoor Power Equipment engines as used in
Lawnmowers, cultivators, misting machines, pumps, generators,
snowblowers, shredders, compact garden tractors, etc.
(Exceptions: some Tecumseh engines fitted with cast iron flywheels,
some JLO engines, Honda GV150, GV200, G50). Fits all VICTA
engines (except twin - which uses our 440-209 module.)
440-209
AM-209 Brown Mini-tron - Fits Chain Saws, Brushcutters, String Trimmers,
Hedge Trimmers - All mechanical points equipped. Also replaces
transistor modules on String Trimmers (prevents excessive RPM).
Fits twin cylinder Briggs and Stratton, Victa Twin, Kawasaki
KF100 and KF200.
440-215
AM-215 Red Mini-tron - Fits Twin cylinder Outboard motors (using one
module per cylinder). Not for engines with battery generator
flywheels. Also fits single cylinder outboards with throttle connected
ignition timing. For outboards with fixed ignition timing refer to our
440-007 module.
440-214
AM-214 Yellow Mini-tron - Replaces Transistor ignition modules as
fitted to many Chain Saws.
440-007
AM-007 Purple Mini-tron - Fits Outboard motors with fixed ignition
timing. (One module per cylinder).
440-009
AM-009 Pink Mini-tron - Fits most Mopeds, trailbikes & motorcycles.
(Magnetic ignition - not battery ignitions).
Breaker Points
440-215
GENERAL FITTING PROCEDURE - Simply cut (A) and
join with (B) Connect (C) to module attaching screw to
engine (earth / ground)
(A)
Condenser
Rotating
Flywheel
(C)
(B)
Connector
(Supplied)
DETAILED INSTRUCTIONS IN PACK
HOW IT WORKS:
1. When starting the engine, the kick-back
prevention mode prevents spark occurring
until the required engine RPM is achieved
(safety feature)
E
Switch
(if fitted)
Spark Plug
2. When engine is operating, at speed or under
load, the timing adjustment mode produces the
ignition spark firing position at the same
efficiency gap position as the points and
condenser.
24 - 03
(Other types of modules cannot do this as they
are similar to those used for factory fitted
engines which to ensure correct ignition timing,
the factory alters their flywheel keyway position.
E
ELECTRICAL / IGNITION
BANTA
COILS / ELECTRONIC MODULES
Part#
OEM#
Application
460-014
B&S# 298502
B&S# 395488
Briggs Ignition Coil - Fits most 2 thru 4 Hp engines with
breaker point ignitions. Models 60100 thru 60497,
81500 thru 81997, 82500 thru 85902, 92500 thru
95500 and 110900 thru 113900.
John Deere# AM30950
(For electronic ignition module, use our 440-409)
460-030
B&S# 298316
Briggs Ignition Coil - Fits most 5 Hp engines with
breaker point ignitions. Models 100200, 100900
and 130200 thru 132900.
(For electronic ignition, use our 440-401)
460-006
B&S# 298968
B&S# 299366
John Deere# AM35759
Briggs Ignition Coil - Fits most 7 thru 16 Hp engines with
breaker point ignitions. Models 144200 thru
147707, 170400 thru 253400 and 300400 thru
326400.
(For electronic ignition, use our 440-417)
460-022
B&S# 290880
Briggs Ignition Coil - Fits models 9, 14, 19, 23, 23A and
191400 thru 231400.
440-409
B&S# 398593
B#S# 496914
Briggs Electronic Module - For most 2 thru 4 Hp
vertical and horizontal engines with electronic
ignitions.
B&S# 397358
B&S# 395491
Briggs Electronic Module - Fits 5 Hp vertical and
horizontal engines with electronic ignitions - except
for Quantum engines.
Fits models 133200, 133700, 135200 and 135700.
440-433
B&S# 802574
Briggs Electronic Module - Fits Quantum and
Europa engines. Models 96700 (2-cycle), 96900,
99700, 12A800 - 12W800 and 121600 - 129800.
440-417
B&S# 398811
B&S# 395492
B&S# 398265
Briggs Electronic Module - Fits 7 thru 16 Hp
vertical and horizontal single cylinder engines with
electronic ignitions. Fits models 176432, 192400,
196400, 197400, 19E400, 19G400, 226400 and 250400.
John Deere# PT11047
440-401
John Deere# PT10998
John Deere# PT15339
NOTE: Use our 440-441 after code# 80090600
440-441
B&S# 492341
B&S# 491312
B&S# 490586
Briggs Electronic Module - Fits 10 thru 13 Hp
L-head engine and Vanguard models 9 Hp,
12-1/2 Hp and 14 Hp. Fits models 286702, 286707,
28B702, 28B707 and 28C707.
NOTE: Use our 440-417 before code# 80090600
E
24 - 04
E
BANTA
ELECTRICAL / IGNITION
COILS / ELECTRONIC MODULES
continued
Part#
OEM#
Application
440-425
B&S# 394891
Briggs Electronic Module - Fits 16 thru 18 Hp
vertical and horizontal twin cylinder L-head engines
with electronic ignition.
Models from 400400 thru 422700.
460-052
NEW
B&S# 691060
Briggs Ignition Coil - For Intek V-Twin engines.
460-053
NEW
B&S# 695711
Briggs Ignition Coil - For 11 and 12 CID Intek engines.
440-216
B&S# 394970
B&S# 395025
B&S# 5025
Briggs Electronic - Fits all engines since 1983
with 2 leg coils except 9, 10 and 16 Hp cast iron
engines or twin cylinder engines. Fits our 460-006,
460-014 and 460-030 coils.
For Dolmar / Sachs / Makita - see our “CHAIN SAW ACCESSORIES- O.E.M.” section.
For Homelite & Husqvarna - see our “CHAIN SAW” and “TRIMMER” sections.
440-348
Honda#
30500-ZE1-033
Honda Ignition Coil - (Solid state module)
Fits models GX110, GX120, GX140 and GX160.
Code# 4589693
440-342
NEW
Honda#
30500-ZG9-M02
440-340
NEW
Honda#
30500-ZE7-043
30500-ZE7-033
30500-ZG9-801
Honda Ignition Coil
Fits most GXV120 series engines.
Code# 4581476
Honda Ignition Coil
Fits most GXV160 series engines.
Code# 7199227
440-349
Honda#
30500-ZE2-013
30500-ZF6-W02
Honda Ignition Coil - (Solid state module)
For magneto ignition. Fits models GX240, GX340
and GX390.
Code# 7032428
440-341
NEW
E
Honda#
30500-ZE2-023
30500-ZF6-W02
Honda Ignition Coil
Fit most GXV240, GXV270, GXV340 and GXV390
series engines.
Code# 7032428
24 - 05
E
BANTA
ELECTRICAL / IGNITION
COILS / ELECTRONIC MODULES
continued
Part#
OEM#
Application
440-517
NEW
Kawasaki#
21171-2092
21171-2193
Kaaz#
21130-2056
Kawasaki Magneto Coil - Fits Kawasaki model TD40,
TD43 and TD48, also fits Kaaz 32cc and 33cc engines.
460-071
Kohler# 220435
Phelon# FG-02145
Kohler Coil - Fits model K91 - 4 Hp engines).
460-048
Kohler# 231281
Tecumseh# 32080
Kohler Ignition Coil - Fits model K91, K141, K181,
K241, K301, K321, K341 and K361 engines.
For 4, 6, 8, 10, 12 and 14 Hp engines.
440-518
NEW
Kohler# 24-584-15-S
Kohler# 24-584-11-S
Kohler# 24-584-03
Kohler Ignition Coil - Fits Command series engine
models CH20, CH22, CH25, CV22, CV25, CH22S,
CH25S and CV22S.
20Hp thru 25 Hp model engines.
440-519
NEW
Kohler# 52-584-02-S
Kohler Ignition Coil - Fits models M18 thru M20,
18 Hp thru 20 Hp model engines.
460-055
Lawn Boy# 582396
Lawn Boy# 580184
Lawn Boy# 582463
Lawn Boy / OMC Coil - Fits Iron Horse and “C”
series Lawnmower models as well as many older
Outboard Motors.
OMC# 582995 / 582931
OMC# 582370 / 580416
OMC# 580197 / 580118
Note: High tension pin is threaded on this coil, green in colour.
(Made in Germany)
460-097
Lawn Boy# 678539
Lawn Boy Coil - Fits “D” series engines with
breaker point ignitions.
440-040
Lawn Boy# 682340
Lawn Boy# 681578
Lawn Boy Solid State Module - Fits models from
1978 thru 1982 (older “F” series)
- grounded to run, - white in colour.
Measures: 3-1/4” L X 2-1/2” W X 1-5/8” HT
440-073
Lawn Boy# 683080
Lawn Boy# 683215
Lawn Boy# 682702
Lawn Boy Solid State Module - Fits models from
1983 and newer (newer “F” series)
- open to run, - gray in colour.
Measures: 3-1/4” L X 2-1/2” W X 1-5/8” HT
Lawn Boy# 681542
Lawn Boy# 683321
Lawn Boy Solid State Module - Fits D-600 models
from 1972 thru 1977.
- open to run, - white in colour
Measures: 4-1/4” L X 2-1/2” W X 1-3/8” HT
John Deere# PT7176
440-057
E
24 - 06
E
ELECTRICAL / IGNITION
BANTA
COILS / ELECTRONIC MODULES
Part#
OEM#
Application
440-059
Lawn Boy# 684048
Lawn Boy# 684049
Lawn Boy Solid State Module - Fits Gold & Silver
series.
For other Lawn Boy - ELECTRICAL / IGNITION parts see our “TRIMMER” sections
For McCulloch, Oleo Mac, Pioneer, Poulan / Weedeater, Ryan, Stihl etc. - see our
“CHAIN SAW ACCESSORIES - O.E.M” and “TRIMMER” sections.
440-524
NEW
Robin# EY-15
Robin Ignition Coil - For EY-15 model engines.
440-525
NEW
Robin# EY-20
Robin Ignition Coil - For EY-20 model engines.
460-063
Tecumseh# 30560A
JD# AM30546
JD# 30950
Phelon# FG-6240
Tecumseh Coil - Fits most 3 thru 10 Hp models.
Found on LAV, V, H, HS and VM series.
- plug wire length: 17”
- no lamination
Fits most point ignition engines.
460-048
Tecumseh# 32080
J-Deere# AM38411
Kohler# 231281
Tecumseh Coil - Fits 6 thru 16 Hp engines.
Single cylinder engines with battery ignition.
440-092
Tecumseh# 35135
Tecumseh# 35135A
Tecumseh Electronic Module - Fits models
TVM, TVXL170 thru 220, OVXL170 thru 220,
OVXL120, HM70 thru HM100, OHM-OHSK120.
For 7 thru 12 Hp engines.
Medium frame engines.
440-093
Tecumseh# 34443A
Tecumseh# 34443B
Tecumseh# 34443C
John Deere# PT9567
Tecumseh Electronic Module - Fits models
TVS, 90, 100, 105, 115, 120, TNT, 100, 120, ECV
100, 120, H30 thru 70, AH600, HSK600, HXL840,
HSK840, HSK845, HSK850, LEV100, LEV115,
TVXL105 and TVXL840.
Small frame engines.
DIODES / HARNESSES
435-115
B&S# 393814
Briggs Diode Assembly - Fits 6 thru 20 Hp electric
start models.
435-116
B&S# 393422
B&S# 692306
Briggs Harness - Use with our 435-115 diode assy.
E
24 - 07
E
BANTA
ELECTRICAL / IGNITION
DIODES / HARNESSES continued
Part#
OEM#
Application
435-205
B&S# 392606
B&S# 691955
Briggs Diode Assembly - For 5 AMP tri-circuit
harness alternators.
Models 256400, 280700 and 351700 series.
Fits Briggs 6 AMP diodes instead of OEM 3 AMP.
435-206
B&S# 393456
Briggs Diode Assembly - For 2-4 AMP dual
circuit alternators. Fits models 196432, 196437, 196452,
197400, 197412, 197417, 280700, 28B700 and 28C700.
Fits Briggs 6 AMP diodes instead of OEM 3 AMP.
435-420
Tecumseh# 611161
Tecumseh Diode Assembly - Fits models HM80,
HM100, OHM920, OHV12, OHV125, OVM120 and
OVXL125. Measures: 3-1/2” overall length.
FLYWHEEL KEYS -
(Flywheel Keys are “Sold in multiples of 10)
445-064
B&S# 222698
B&S# 222698S
John Deere#
PT7211
Briggs Flywheel Keys - Used on engines with
electronic ignitions.
445-007
B&S# 61760
Briggs Flywheel Keys - Used on engines with
breaker point ignitions.
445-023
Clinton# 148-4
Clinton Flywheel Keys
445-072
Lawn Boy# 607199
John Deere# 26H10
Lawn Boy Flywheel Key - Fits all LB 2 cycle
Lawnmowers with breaker point ignitions. Indent in side
holes hold in place on crankshaft. Size: 5/8” L X 5/32” W
445-015
Tecumseh# 27902
Tecumseh Flywheel Key - Steel flywheel key
Size: 1” L X 3/16” W X 1/8” HT
445-049
Tecumseh# 610961 Tecumseh Flywheel Key - For points ignitions on
Tecumseh# 27247
older 3 and 3-1/2 Hp engines.
John Deere# M81575 Size: .703” L X .187” W X .125” HT, with a .088” notch depth.
445-056
Tecumseh# 610951
Tecumseh Flywheel Key - Same as above with
only one difference, the notch depth is .054”
445-052
Tecumseh# 610995
(Silver Key)
Tecumseh Flywheel Key - For points ignitions on
newer 3 and 3-1/2 Hp engines with external coils.
445-405
Tecumseh# 611154
Tecumseh Flywheel Key - Vector series engines.
Fits models ULT50, 55, 60, VLV126, 50, 55, 60, 65, 66,
VLT150 and VLX155. Size: 31/32” L X 1/8” W X 5/64” HT
445-403
Tecumseh# 611004
(Gold Key)
Tecumseh Flywheel Key - Offset key used on
engines with solid state ignitions. Fits models TVS,
TNT, ECV, H30 thru H70, Ah600, HSK600, HXL840,
SHK840, SHK845 and SHK850. (Gold Key)
E
24 - 08
E
ELECTRICAL / IGNITION
IGNITION SETS
BANTA
- POINTS and CONDENSERS continued
Part#
OEM#
Application
450-007
B&S# 294628
Briggs Ignition Set - Fits 2 thru 8 Hp engines.
Models 60100 thru 195400
450-015
B&S# 29667
B&S# 29861
Briggs Ignition Set - Fits models I, N, U, W, 5, 6, 6F, 6R,
6S, 8 and 140000.
450-114
B&S# 29667
Wico# X15022
Briggs Breaker Points - Fits models I, N, U, W, 5, 6, 6F,
6R, 6S, 8 and 140000.
(While Quantities Last)
450-148
B&S# 298185
Briggs Breaker Points - Fits 8 thru 16 Hp cast- iron
engines Models 19D, 23D, 193400, 200400, 233400,
243400, 300400, 301430, 302430, 320420, 325430
and 326430.
450-155
B&S# 391284
Briggs Breaker Points - Fits 10 and 11 Hp
engines. Models 220000 thru 222000 and 252400 thru
253400
(While Quantities Last)
455-006
B&S# 29861
Wico# X15023
(While Quantities Last)
455-014
B&S# 291369
Wico# X15032
Briggs Condenser - Fits 10 and 11 Hp engines.
Models I, N, U, W, 5, 6, 6F, 6R, 6S, 8, 146000 thru
171000, 200400 thru 222400, 251400 thru 253400.
(Use with our 450-114 breaker points)
Briggs Condenser - Fits models 9, 14, 19, 23, 23A and
191400 thru 231400.
(Use with our 450-122 breaker points)
(While Quantities Last)
455-022
B&S# 298060
Briggs Condenser - Fits 8 thru 16 Hp cast-iron engines.
Models 19D, 23D, 193400, 200400, 233400, 243400,
300400, 301430, 302430, 320420, 325430 and 326430.
(Use with our 450-148 breaker points)
450-130
B&S# 65704
Briggs Point Plungers - Fits 2 thru 11 Hp vertical
and horizontal engines. (Made of a fibre material).
(Sold in multiples of 10)
450-239
Clinton# 135-7-500 Clinton Breaker Points - Fits many makes
455-162
Clinton#
135-024-000
Clinton Condenser - Fits many makes
Fairbanks#
AXMR-2433
Gravely# 13909
Fairbanks Morse condenser.
Jacobsen# 107811
John Deere# AM30947
Lombard# 7-1120, McCulloch# 80433 / 88806,
Phelon# FG1835B / FG03560 / 02197-00B, 06230, Remington# 60623
John Deere# AM30949
Phelon# FG1316 / FG06225 / 071130
455-048
(While Quantities Last)
E
24 - 09
E
BANTA
IGNITION SETS
ELECTRICAL / IGNITION
- POINTS and CONDENSERS continued
Part#
OEM#
450-171
Kohler# 266240
Kohler Breaker Points - Fits 4 thru 16 Hp engines
Gravely# 12979
with magneto ignition.
Last)
tities
Wisconsin# W2437
Quan
e
il
h
(W
Wisconsin# A-2437A / 10412437
450-288
Kohler# 240611
Kohler Breaker Points
Gravely# 13996 (points)
Gravely# 34907 (only)
Wisconsin# X6942 / X5996
450-403
Application
(Whil
e Qua
ntities
Last)
Kohler# 47-150-01
Kohler# 47-150-03
Kohler# 220980
Gravely# 15435
Kohler Breaker Points - Models K91 thru K361.
For 6 thru 20 Hp engines with battery ignition.
450-029
Kohler# 47-150-03
Wico# WX13260
Wico# WX15241
JD# AM31026
Kohler Breaker Points - Fits models K91, 141,
161, 181, 241, 301, 321, 341, 361, Kt17, 482, 19,
532, 21 and 582 series.
455-147
Kohler# 230722
Gravely# 11824
Kohler Condenser - Fits models K91 thru K582
with battery ignition.
(Use our breaker points 450-029 or 450-403).
455-113
Kohler# 232526
Tecumseh# 29177
Kohler Condenser - Fits models K141 thru K341
with magneto ignition.
Phelon# FG-4082
Phelon# FG-06867
455-170
(For breaker points less bracket, order our 450-029 below).
Includes Bracket >
eQ
(Whil
uantiti
es La
Kohler# 235786
Kohler# 47-147-01
Gravely# 10845
Kohler Condenser - Fits models K141 thru K341
with magneto ignition.
450-197
Lawn Boy# 677254
Wico# X15046
Lawn Boy Breaker Points - Fits C and D series
engines.
450-023
Tecumseh# 30547A
Tecumseh# 30548B
Tecumseh Ignition Set - Fits 3 thru 10 Hp
engines.
Models H, HH40 thru 70, HM70 thru 100, HS,
LAV, TNT, V, VH and VM series.
450-239
Tecumseh# 27948
Tecumseh# 30547A
Tecumseh Breaker Points - Fits 3 thru 10 Hp
engines.
Models H, HH40 thru 70, HM70 thru 100, HS,
LAV, TNT, V, VH and VM series.
(Use with our 455-162 condenser)
Tecumseh# 27526
Tecumseh# 29625
Tecumseh Breaker Points
(Whil
Phelon# FG-07533
Lombard# 7-1120
McCulloch# 80433 / 88806
Remington# 60623
Phelon# FG1835B /
FG03560 / 02197-00B
450-270
e Qua
ntities
st)
Last)
Jacobsen# 107402
Poulan# 3943 / F366, Wico# X11030 / X11211
E
24 - 10
E
BANTA
ELECTRICAL / IGNITION
IGNITION SETS
- POINTS and CONDENSERS continued
Part#
OEM#
Application
450-213
Tecumseh# 610275
Tecumseh Breaker Points
455-162
Clinton# 135-128-500
Jacobsen# 104353
McCulloch# 75101A / 1340135
Phelon# FG00626 / 04205-00-D / Wico# X15011
Tecumseh# 30548B
Clinton# 135-24-000
Phelon# FG-1316
Phelon# FG-06225
t)
es Las
uantiti
Q
(While
Tecumseh Condenser - Fits 3 thru 10 Hp
engines. For models H, HH40 thru 70, HM70 thru 100,
HS, 638, 650, 670, LAV, TNT, TVS520 thru 600, V,
VH and VM series.
(Use with our 450-239 breaker points)
455-204
Tecumseh# 29164
Tecumseh# 27527
Tecumseh Condenser
Tecumseh# 610467
Jacobsen# 315804
Phelon# FG-2642B
Tecumseh Condenser
Tecumseh# 610588
Lombard# 7-1153
Phelon# FG-4016B
Wright# 603502
Tecumseh Condenser - Fits models 1401J,
1577, 15060, 1534D, 1581A, 1574B and 1576B.
Tecumseh# 610331
Tecumseh Condenser
(While
Jacobsen# 314457
Poulan# F356 / Wico# X11000
455-105
455-121
455-089
450-296
Clinton# 135-241-500
Phelon# FG-1355
Wisconsin# YQ-314A
Wico# 14508B
(While
(While
(While
Wisconsin# YQ-11
450-163
st)
ties La
Quanti
st)
ties La
Quanti
st)
ties La
Quanti
Wisconsin Breaker Points
(While
450-171
st)
ties La
Quanti
Wisconsin Breaker Points - Fits models S8.
(While
450-320
st)
ties La
Quanti
Wisconsin# W2437
Wisconsin Breaker Points
Wisconsin# A-2437A
Wisconsin# 10412437
Gravely# 12979, Kohler# 266240
(While
st)
ties La
Quanti
st)
ties La
Quanti
Wisconsin# 31B-2437A Wisconsin Breaker Points
(While
st)
ties La
Quanti
455-501
Wisconsin# YQ-11
Wisconsin Condenser - Fits model S-7
s Last)
Wico# X12944
antitie
ile Qu
h
(W
Wico# Wx15254 / FWM-2308
455-519
Wisconsin# YD-315
Wico# X14590
Wico# WX15250
E
Wisconsin Condenser - Fits models S8 and
TR10.
24 - 11
t)
es Las
uantiti
Q
(While
E
BANTA
ELECTRICAL / IGNITION
REGULATORS
Part#
OEM#
435-040
B&S# 295924
Briggs Voltage Regulator - For starter generators.
Delco# 1118988
Fits models 140201, 140202, 140232, 141202,
Jacobsen# 107927
141231, 141251, 141252, 243431 and 243432.
John Deere# Am30078,
Tecumseh# 32089
435-042
B&S# 691185
B&S# 394890
B&S# 393374
Briggs Voltage Regulator - For 18 - 20 Hp
engines with 10, 13, 14 and 16 AMP charging
systems.
Fits models 192400, 196400, 226400, 28M700,
280700 and 351700.
435-046
B&S# 397809
Briggs Voltage Regulator - For 8 amp quad
circuit charging system.
(Used on 422700 series engines).
435-047
B&S# 691188
B&S# 491546
Briggs Voltage Regulator - For 5 & 9 amp charging
systems.
Fits models 256400, 280700, 28B700, 28M700 thru
28Q700, 351400, 351447, 351700, 351777 and
42A700 series engines. (1) yellow & (1) red lead
435-048
B&S# 493219
Briggs Voltage Regulator - For 16 amp dual output
charging systems. (With no charge indicator light),
8 thru 20 Hp engines.
(Used on 303700 series engines).
435-010
Grasshopper# 185530
Kubota# 15531-64603
Grasshopper and Kubota Voltage Regulator
Fits Grasshopper models 1822D, 718D, 721D & 721G.
Used on lawn & garden, compact tractors and small
industrial equipment with permanent magnet alternators
with a “no charge” indicator light.
435-009
Honda# 31600-890-951 Honda Voltage Regulator - For Honda Lawn Tractors.
435-005
John Deere# AM101406 John Deere Voltage Regulator - Used on garden
tractor models 322, 330, 332 and commercial mower
model F915, also used on compact tractor models 670,
770, 870, 970 and 1070.
435-006
John Deere# M802471 John Deere Voltage Regulator - Used on models 650
and 750 - compact tractors.
435-013
Kawasaki# 21066-2056 Kawasaki & John Deere Voltage Regulator
John Deere# M70121 Fits Kawasaki models FB460, FC400, FC420 & FC540.
For 13, 15 and 17 amp charging system up to 18 Hp
engines. Also fits John Deere models 130, 160, 165,
170, 172, 175, 176, 180, 185, 186, 240, 242, 245, 265,
285, 320, 325, 345, F510, F525, F710 and F725. Fits
ATM models 600, 622 and 626. Fits Gator 4X2 & 6X4
models with 15 amp charging systems.
E
Application
24 - 12
E
ELECTRICAL / IGNITION
BANTA
REGULATORS continued
Part#
OEM#
Application
435-004
Kawasaki# 21066-2070
John Deere# M97348
Kawasaki & John Deere Voltage Regulator
For 20 and 22 Hp water cooled V-twins. Also fits the
following John Deere applications: models 425, 445
and F911, Gator 6X4 models with 20 amp charging
systems.
435-014
Kawasaki# 21066-2071 Kawasaki Voltage Regulator - Fits on
John Deere# AM109462 commercial walk behind mowers.
435-085
Kohler# 41-403-08
Kohler Voltage Regulator
John Deere# AM102596 Fits K series engines.
Tecumseh# 610749
8 thru 12 Hp single
cylinder engines.
For 10 amp charging systems.
A.C.
B+
Case must
be grounded
435-081
Kohler# 25-755-03
Kohler# 41-403-01
Kohler# 41-403-04
Kohler# 41-403-05
Kohler# 41-403-09
Kohler Voltage Regulator - Fits models KT-17 thru
19, M8 thru MV20 and quiet series.
For 15 amp charging systems.
435-084
NEW
Kohler# 41-403-06
Kohler Voltage Regulator - For 8 thru 24 Hp engines
with 15 amp alternators. Fits models K181, K241,
K301, K321, K482, K532 and K582. “L” pattern with
(2) terminals. Uses system “S” series K181 thru K582,
10 - 16 Hp single cylinder. Also fits John Deere.
A.C.
Terminals: (1) B+ at top with (2) AC terminals side by side.
Same “L” pattern as our 435-083 regulator below
435-083
Kohler# 41-403-06
Kohler# 237335
John Deere# AM37200
Kohler Voltage Regulator
Fits 8 thru 24 Hp engines
Models K181 thru K582,
15 amp style, 12 V neg.
Terminals 2 over, 1 under
A.C.
A.C.
B+
435-019
435-011
Kohler# 12-403-01
Onan# 191-1748
Onan# 191-2106
Onan# 191-2277
Kohler Voltage Regulator
Used on commercial walk
behind mowers with Kohler
engine with electric P.T.O.
clutch, rope starter and no
battery. Used on CV11, CV12.5,
CV13, CV14, CV15 & CV18
model engines.
A.C.
B+
A.C.
Onan Voltage Regulator
Used on engines 16 thru 20 Hp
Also used on John Deere models 318-420 with
Onan engines.
Please visit our web site for more information
and pictures @ www.bantasaw.com
E
24 - 13
E
BANTA
ELECTRICAL / IGNITION
RELAYS
Part#
OEM#
Application
435-369
AYP# 109748X
Husqvarna#
532 10 97-48
Relay Switch - Found on many Riders made by AYP.
ie: Poulan, Jonsereds and Husqvarna etc.
Also fits Great Dane, John Deere, Encore and
Grasshopper lawn & garden equipment.
435-370
NEW
AYP / Husqvarna
Relay Switch - Fits Husqvarna ZTR and Country
Clipper zero turn radius models.
Helga ID# 93180 01
435-371
NEW
AYP / Husqvarna
Relay Switch - Fits Husqvarna ZTR and John Deere
Z TRAK models.
Bosch# 0332 209-150
435-550
NEW
MTD# 925-1648
MTD# 725-1648
Relay Switch - Fits Autodrive riding mowers
and snowblowers.
- 12 Volt
- 20 amp
1
87
87a
86
4
5
SOLENOIDS
435-071
Replaces
Ariens# 03057700
Bolens# 1751569
Murray# 424285
Murray# 924285
Murray# 21261
Murray# 24285
MTD# 725-0771
MTD# 725-1426
MTD# 725-0530
MTD# 925-1426
MTD# 925-0771
Nama# 53716
Noma# 52323
Snapper# 1-8817
Toro# 111674
Troy Bilt# 1751569
Universal “3” Pole (chassis ground)
Terminal posts will accommodate both
5/16” and 1/4” terminal connectors.
Mounting bracket will accommodate both
chassis and wall mount configurations.
SOLENOIDS
435-016
E
- Universal Application
85
30
2
3
(These “2” solenoids replace over “50” solenoids).
435-072
Replaces
Universal “4” Pole (terminal ground)
Terminal posts will accommodate both
5/16” and 1/4” terminal connectors.
Mounting bracket will accommodate both
chassis and wall mount configurations.
Ariens# 03551000
AYP# 109081X
AYP# 109946
AYP# 146154
Bolens# 1752137
Bolens# 1753539
Case# C-266525
Case# C33025
Exmark# 1-513075
Gilson# 212655
Grasshopper# 184251
Gravely# 045071
Lawn Boy# 740207
Simplicity# 170051
16771993 / 16852980
1700751/ 1686981
Snapper# 1-8604
Toro# 47-1910
Toro# 110116
1101162 / 110167, Troy Bilt# 1752137 / 1753539 / 1752137P
- O.E.M. Applications
Universal Type
Cushman# 889673
Dixie Chopper# 20253
Universal Solenoid - Many applications. Fits
50” and 60” cut Dixie Chopper with 20 & 24 Hp
Kohler engines.
- 4 pole style
- 12 volt
- 5/16”-24 studs
- Grounded through base
24 - 14
E
ELECTRICAL / IGNITION
BANTA
SOLENOIDS continued
Part#
OEM#
Application
435-008
Gravely# 7277
Snapper# 1-9544
Solenoid - Many applications
- 3 pole style
- 12 volt
- 1/4”-20 studs
- Grounded through base
435-099
AYP# 146154 / 24285
Solenoid - Grounded through pole not base
AYP# 3367R / 44429
- 4 pole style
AYP# 138406X / 2008J
- 12 volt
AYP# 2161 / 677A880
- 1/4”-20 studs
Ariens# 35510
- Includes new spade converters
Bolens# 1752137
Bolens# 1753539
Case# C-26525 / C-33025, Gilson# 212655, Grasshopper# 184251, Gravely# 45071,
Lawn Boy# 740207, Simplicity# 1700751 / 1685290, Snapper# 1-8604,
Stiga# 1134-2946-02, Toro/Wheel# 28-4210, Toro/Wheel# 47-1910 / 110162
435-032
Ariens# 35770
Solenoid - Internal ground with screw terminal
Ariens# 35832
- 3 pole style
Bolens# 1751569
- 12 volt
Bunton# Pl4007
- 5/16”-24 studs
Encore# 363027
- Includes new spade converters
MTD# 725-0530
Noma# 53716 / 52323, Scag# 48106,
Simplicity# 1671994, Snapper# 1-8817, Stiga# 1134-2946-01, Toro/Wheel# 11674
435-065
AYP# 110832X
MTD# 725-1426
MTD# 725-0771
Murray# 21261
Snapper# 1-8817
Solenoid - 90 degree mount
- Grounded through base
- 3 pole style
- 12 volt
- 1/4”-20 studs
435-097
AYP# 109081X
AYP# 109946X
Murray# 24285
Snapper# 1-8817
Toro/Wheel# 111674
Solenoid - Grounded through base
- 3 pole style
- 12 volt
- 1/4”-20 studs
435-077
NEW
John Deere# AM132990
John Deere# AM133094
John Deere# AM130365
Solenoid - 90 degree mount
- 4 pole style
- 12 volt
- 5/16”-24 studs
- 2 spade terminals
SPARK PLUG ACCESSORIES
135-107
Universal
Spark Plug Boot - Used on Lawnmowers, ATV”s and
Mini-Bikes. Boot has a threaded screw for high
tension lead. For 7mm spark plug wire.
135-133
Stihl# 1108-405-1000
Spark Plug Boot - Found on Stihl Quik cut saws and
old 08 / 08S chain saws.
Using the smaller 5mm spark plug wire.
E
24 - 15
E
BANTA
ELECTRICAL / IGNITION
SPARK PLUG ACCESSORIES continued
Part#
OEM#
Application
135-053
Homelite# A55373-A
Spark Plug Boot - For many Chain Saws & Trimmers.
> 5mm spark plug wire.
135-095
Lawn Boy# 510231
Spark Plug Boot - For Lawn and Garden equipment.
> standard 7mm spark plug wire.
135-046
Tecumseh# 610118
Spark Plug Boot - Found on Lawn and Garden
equipment.
Using the standard 7mm spark plug wire.
Lawn Boy# 580339 / 684698
NOTE: Above are - (Sold in multiples of 10)
135-204
NEW
Husqvarna#
501-485-402
Spark Plug Boot - 90 degree for chain saw models
340, 345, 346, 350 and 351.
__mm spark plug wire.
135-213
NEW
Husqvarna#
501 48 54-02
Spark Plug Boot - 45 degree for trimmer models
232, 235, 322 and 325.
5mm spark plug wire.
135-065
NEW
Honda#
30700-ZE1-013
Spark Plug Boot - Fits models GX120, GX140,
GX160, GX200, GX240, GX270, GX340 and GX390.
135-516
NEW
Kawasaki# 21130-0256
Kawasaki# 20010-72221
Mitsubishi# Tr64961
Shindaiwa# 22102-72220
135-119
NGK# LB05EP
Spark Plug Boot - 90 degree - Made by NGK
Comes with wire end, water tight boot and has a
built-in resistor of 5000 OHMS.
135-121
NGK# LB05EP
NGK# VB05F
NGK# VBOF 8032 45
Spark Plug Boot - 45 degree - Made by NGK
Fits overhead valve engines.
135-012
B&S# 221798
Spark Plug Clip - Universal application.
Used in our 135-046 spark plug boots.
135-015
Universal
Spark Plug Clip - Universal application.
Used in our 135-053 & 135-095 spark plug boots.
135-017
B&S# 493880
Terminal Spark Plug - Universal application.
Fits 7mm spark plug wire, positive lock.
Code# 3526837
Above are (Sold in multiples of 10)
135-061
Sold in multiples of 10
Universal
Spark Plug Boot - Fits Kawasaki models TD26,
TDd40, TD43 and TD48.
Fits Shindaiwa models T25, T27 and C35.
Fits Mitsubishi models TL26, TL33, TL43 and T200.
Spark Plug Wire - 5mm, Quality black hypolon
outer, copper wire inner
(Priced and Sold in 10 meter rolls) i.e.: 30 plus feet
135-004
Universal
Spark Plug Wire - 7mm, Quality black hypolon
outer, copper wire inner
(Priced and Sold in 10 meter rolls) i.e.: 30 plus feet
135-020
Universal
Shorting Clip - Clamp on style, Length: 2-1/2”
Fits all 14mm spark plugs with 13/16” nut
135-038
Universal
Shorting Clip - Bolt on style, Length: 3”
Univ. application, pointed to penetrate plug boot
Above are (Sold in multiples of 10)
E
24 - 16
E
ELECTRICAL / IGNITION
BANTA
SWITCHES and ACCESSORIES - UNIVERSAL
Part#
OEM#
Application
430-017
Universal
Kill Switch - Used as an on / off switch
Found on many Chain saws and Trimmers using
a single wire, self grounding type switch.
430-066
Universal
Deluxe Kill Switch - Used as an on / off switch
Found on many Go-carts and ATV’s. Comes with
a 48” lead wire and two metal clamps with screw.
430-070
Universal
Kill Button - Comes complete with 42” wire lead.
Fits 7/8 - 1” tube handles. Used on Lawn and
Garden equip. as well as Mini-bikes, Go-carts etc.
430-009
Indak Key
Starter Key - Fits all Lawnmowers with Indak
switches. Found on MTD, Murray, Noma,
Toro/Wheel Horse and other types of equipment.
430-488
MTD# 725-0128
Troy Bilt# 9243
MTD and Troy Bilt Starter Key - Found on MTD,
Toro / Wheel Horse, John Deere & many others.
Also fits Troy Bilt electric start models.
(Sold individually)
430-493
NEW
MTD# 725-1341B
430-223
Universal
Universal Wiring Harness - Works with our
430-538, 430-013, 430-512 and most other 5
terminal type switches.
Length: 18” with (5) colour coded wires.
Wires are protected by a plastic cover.
430-206
Universal
Universal Switch Connector - Works with our
430-538, 430-013, 430-512 and most other 5
terminal type switches.
430-207
Universal
Universal Switch Terminals - Slide on terminal
ends. Works with our 430-207 connector.
Molded Ignition Key for MTD - Has ergonomic slip
resistant comfort grip.
(Sold individually)
(Sold in multiples of 10)
425-272
Universal
In Line Fuse Holder - 16 gauge wire, molded
plastic fuse holder.
Comes complete with 10” of wire & 20 amp fuse.
425-306
Universal
In Line Fuse Holder - For ATC / ATO style fuses
up to 30 amp, 10 AWG wire.
430-033
Universal
Starter Switch - 3 position, 4 terminal
1st - magneto ground
2nd - battery and light
3rd - off
Stem diameter: 3/4”
430-041
E
Universal
Starter Switch - 4 position, 5 terminal
1st - magneto ground
2nd - battery and light
3rd - battery and solenoid
4th - off
Stem diameter: 3/4”
24 - 17
Lite
Grd
Bat
Mag
Sol
Mag
Lite
Bat
Grd
E
BANTA
SWITCHES
ELECTRICAL / IGNITION
SWITCHES
- IGNITION
- IGNITION
Part#
Application
Part#
Application
430-029
5/8” mounting stem, on / off switch
(2) position, (2) terminal
Battery type switch found on many single
stage snowblowers.
430-542
5/8” mounting stem
(3) position, (4) spade terminals plus
(2) heavy screw in terminals - “BAT” & “SOL”.
O.E.M. Applications
O.E.M. Applications
Ariens# 11134 / 24656
Ariens# 524069 / 624097
Ariens# 52406900 / 02456500
AYP# 135944
Cub Cadet# 725-3232
Exmark# 403121
Ferris# 1521842
Grasshopper# 184-082
Great Dane# D18090
Homelite# JA13064-1
Lawn Boy# 700171 / 740015
Murray# 56419
Noma# 49907 / 56992
Scag# 48609
Simplicity# 1664804
Snapper# 1-7817
Troy Bilt# 175-8145
430-249
Also replaces the following switches: 74R, 2210R,
5797H, 7486H, 9541H, 21037, 71577, 72841 and 511404.
AYP# 365401R
430-543
5/8” mounting stem, magneto type switch
(3) position, (5) terminal
O.E.M. Applications
AYP# 158913
Exmark# 543070
5/8” mounting stem, battery type switch
(3) position, (5) terminal
O.E.M. Applications
Ariens# 31152
AYP# 2683 / 2683R
Gravely# 19223 / 019223
Jacobsen# 129846
John Deere# AM103286
John Deere# AM32686
John Deere# AM32318
Toro# 12-8140
Troy Bilt# 12-840
430-541
430-538
O.E.M. Applications
5/8” mounting stem, magneto type switch
(4) position, (5) terminal
O.E.M. Applications
AYP# 14615
AYP# 73232
Use our “Universal wiring harness”
Part# 430-223
on all 5 spade ignition switches.
See pg 24-16 “Switches & Accessories Universal”
E
5/8” mounting stem, magneto type switch
(3) position, (5) terminal
AYP# 3612R / 4406R / 365402
Bobcat# 480032B
Bunton# PAL0903
Cub Cadet# 725-3026
Dixon# 4197
Economy# 03-2018
Gilson# 36457
Honda# 35100-772-003
John Deere# AM102551
Lawn Boy# 741308
MTD# 725-0267 / 925-0267
Murray# 21064 / 21064PA
Noma# 44745 / 300295
Noma# 421064 / STD365402
Scag# 48017
Simplicity# 178280
Toro# 23-0660
430-538
This is our most popular
“Ignition Switch”
24 - 18
E
BANTA
ELECTRICAL / IGNITION
SWITCHES
SWITCHES
- IGNITION
- IGNITION
Part#
Application
Part#
Application
430-110
(3) position, (6) terminal
Fits models 235432, 235437, 245432,
245437, 28N707, 28N777, 28Q777, 350422.
430-250
13/16” mounting stem, magneto type switch
(3) position, (6) terminal
Fits models F910, F930 front mounts; 130,
165, 170, 175, 180, 185, F912, F915, F925,
RX73, RX75, RX95, SX75 and SX95.
O.E.M. Applications
Briggs & Stratton# 493625
Briggs & Stratton# 692318
Scag# 48798
O.E.M. Applications
John Deere# AM101561
430-251
430-013
5/8” mounting stem, magneto type switch
(4) position, (5) terminal
O.E.M. Applications
Gravely# 18272
Gravely# 018272
Murray# 91846
Noma# 300687
Noma# 305720
430-245
9/16” mounting stem, magneto type switch
(3) position, (6) terminal
Fits S910 and S930 front mount, 108, 111,
112, 116 lawn tractors, 316, 318, 420 garden
tractors, GS25, GS30, GS45, GS75, HD45 &
HD75. Also found on 300 & some 200 series.
O.E.M. Applications
John Deere# AM38227
Kohler# 25-099-03
9/16” mounting stem, magneto type switch
(3) position, (5) terminal
Fits 110, 112 and 140 tractors
430-128
O.E.M. Applications
John Deere# AM31995
John Deere# AM102544
9/16” mounting stem, magneto type switch
(3) position, (6) terminal
Fits models CH11, CH12.5, CH14, CH18,
CH20, CH22, CH25, CV12.5, M8, M10, M12,
M16, M18, M20, TH16 and TH18.
O.E.M. Applications
Kohler# 25-099-04
Kohler# 25-099-02
Toro# 103991
Toro# 111215
Waterproof Kit for INDAK Switches
430-000
Two piece kit:
> (1) plastic nut
> (1) rubber bezel
E
Need pitures
Rotary#’s 31-10792
and 31-10791
24 - 19
E
BANTA
SWITCHES
ELECTRICAL / IGNITION
SWITCHES
- IGNITION
- IGNITION
Part#
Application
Part#
Application
430-553
5/8” mounting stem
(3) position, (6) terminal
Fits all MTD lawn and garden tractors with
Briggs & Stratton OHV Vanguard engines.
430-161
5/8” mounting stem, magneto type switch
(4) position, (6) terminal
Fits front engine riders, 1992 and newer
O.E.M. Applications
O.E.M. Applications
Murray# 92377
MTD# 725-1396
MTD# 925-1396
430-156
430-488
Starter Key - Fits most MTD riders, also
found on some Troy Bilt equipment.
O.E.M. Applications
O.E.M. Applications
MTD# 725-0128
Troy Bilt# 9243
430-655
5/8” mounting stem
(4) position, (7) terminal
For engines equipped with fuel shut off
solenoid - built since 1994.
Fits model 461004X92A
Murray# 92556
MTD# 725-1717
AYP# 140301
Snap in mounted
(3) position, (5) terminal
(Uses our 430-667 key)
O.E.M. Applications
John Deere# AM122881
430-654
Thread mounted
(3) position, (5) terminal
(Uses our 430-668 nut & 430-667 key)
O.E.M. Applications
430-667
Ignition Switch Keys - fit our 430-658,
430-659, 430-660, 430-661, 430-662,
430-663, 430-664, 430-665 and 430-666
ignition switches.
430-009
Indak Ignition Switch Keys - fit most
INDAK switches.
(Sold in multiples of 10)
AYP# 140399
AYP# 144921
AYP# 154855
AYP# 163088
AYP# 178744
Murray# 327355
Simplicity# 1718306
Simplicity# 1713845
Simplicity# 1686734
430-668
Plastic Nut - Fits our
430-654 ignition switch.
(Sold in multiples of 10)
430-009
Is our most popular ignition key
E
24 - 20
E
BANTA
ELECTRICAL / IGNITION
SWITCHES
SWITCHES
- IGNITION
- IGNITION
Part#
Application
Part#
Application
430-015
Snap in mounted
(4) position, (7) terminal
430-512
5/8” mounting stem, battery type switch
(3) position, (5) terminal
Fits Husky models YTH1542XP / 1542TPG / 1848XP,
LTH1342 / 1342A & YTHP1542. John Deere models
L100, 105, 107, 110, 120, 130, G110, LY18 and some
Scotts / Sabre models. Fit MTD auto step thru frame
tractors 1999 and newer.
O.E.M. Applications
Toro# 103990
Kohler# 48-099-01
O.E.M. Applications
AYP# 163968 / 175442 / 175566
Husqvarna# 532 17 55-66
John Deere# GY20074
Murray# 94762
MTD# 725-1741 / 925-1741
430-504
5/8” mounting stem, magneto type switch
(2) position, (1) terminal
Single screw terminal, found on riders.
430-954
NEW
O.E.M. Applications
Snapper# 1-1853
9/16” mounting stem, battery type switch
(3) position, (6) terminal
Fits Toro Groundsmaster
3, 52, 62, 72, 172, 322, 325,
327, 400, 500, RM223D,
450D, 335D, 5100D.
O.E.M. Applications
Toro# 27-2360
430-520
5/8” mounting stem, magneto type switch
(3) position, (3) terminal
Fits all riders
1973 thru 1987
with screw terminals.
O.E.M. Applications
430-523
Snapper# 1-1155
(2) position, (2) terminal
For models S200 and S620 snowblowers.
Also fits 32”, 36”, 37”, 44” and 52”
mid sized commercial mowers with pull start.
O.E.M. Applications
Toro# 29-5560
Toro# 40-5940
430-144
5/8” mounting stem, magneto type switch
(3) position, (3) terminal
Fits rear engine riders. Series 6 thru 11,
1988 to present
O.E.M. Applications
Snapper# 1-8816
430-710
NEW
(__) position, (7) terminal
Fits models
Stiga Park 2000 and
Stiga Villa 2001
O.E.M. Applications
Stiga# 1134-4093-01
430-165
5/8” mounting stem, push button switch
(2) position, (2) terminal
O.E.M. Applications
Snapper# 1-2623
E
SWITCHES - Mullti Application start on
the next page listed in alphabetical
order by manufacturers name.
24 - 21
E
BANTA
SWITCHES
ELECTRICAL / IGNITION
- Multi Application
SWITCHES
- Multi Application
Part#
Application
Part#
Application
430-017
Universal Kill Switch - On / off switch found
on many chain saws and trimmers.
Using a single wire, self grounding type
switch.
430-657
PTO Switch - Middle terminal blank.
Push - pull / snap mount
O.E.M. Applications
Green Machine# 201030
Homelite# 63938
Homelite# 93653
John Deere# PT1008
Toro# 29-7660
Weedeater# 90824
Weedeater# 534-193001
430-066
Universal Deluxe Kill Switch - On / Off
switch found on Go-carts, ATV’s etc.
Comes complete with a 48” lead wire and
(2) metal clamps with screws.
O.E.M. Applications
O.E.M. Applications
Ariens# 5221 / 522100
Ariens# 1545600
Exmark# 633673
John Deere# AM118802
John Deere# AM119139
Kubota# K1211-62230
Kubota# K1211-62231
MTD# 725-3233
MTD# 725-1716 / 925-1716
MTD# 725-1752 / 925-1752
Scag# 481635
Snapper# 2-8542
Toro# 95-4108 / 95-7489
Toro# 93-9998 / 93-9999
430-777
Universal
PTO Switch Retaining Ring - Used with
our 430-656 and 430-657.
(Sold in multiples of 5)
O.E.M. Applications
AYP# 140405
430-070
Kill Button - Comes complete with
42” lead wire, fits 7/8” - 1” tube handles.
Used on lawn & garden equipment as well
as mini-bikes, Go-carts etc.
PTO Switch - Corner terminal blank.
Push - pull / snap mount
O.E.M. Applications
O.E.M. Applications
Universal
425-272
430-656
Universal In-Line Fuse Holder - 16 gauge
wire, molded plastic fuse holder. Comes
complete with 10” of wire and 20 amp fuse.
O.E.M. Applications
AYP# 140404 / 146283
AYP# 154959 / 154963
AYP# 169416 / 169417
Bunton# Pl7994
Dixon# 5961
Encore# 523030
Murray# 94927 / 6201-316
Scag# 481687
Snapper# 3-5658 / 35658
Yazoo# 101768
Universal
430-658
Plunger Interlock Switch - Single pole,
snap in mount. Normally open
O.E.M. Applications
425-306
Universal In-Line Fuse Holder - For ATC /
ATO style fuses, up to 30 amp, 10 AWG wire.
O.E.M. Applications
Universal
E
Ariens# 30957
AYP# 109869X
Bobcat# 38383
Exmark# 513152 / 1-513152
Ferris# 21769
John Deere# AM108483
Kees# 923408
Snapper# 2-7225 / 27225
24 - 22
E
BANTA
ELECTRICAL / IGNITION
SWITCHES
- Multi Application
SWITCHES
- Multi Application
Part#
Application
Part#
Application
430-660
Plunger Interlock Switch - Single pole,
snap in mount. Normally open
435-369
Relay for AYP - Fits several AYP riders.
Open to run
O.E.M. Applications
O.E.M. Applications
Ariens# 36571 / 03657100
Exmark# 513051
Ferris# 21451
John Deere# AM104884
MTD# 725-1657A / 925-1657A
Murray# 24273
Scag# 481637
Troy Bilt# 1748723
Yazoo# 1923-025
430-659
Ariens# 03042800
AYP# 109748X
Exmark# 1-643275
Gravely# 040216
430-664
Plunger Interlock Switch - Double pole,
Normally open / normally closed
O.E.M. Applications
Ariens# 088281 / 08828100
AYP# 109553X
Bobcat# 108208
Bush Hog# 99073
Dixon# 4242
Encore# 523034
Exmark# 633111 / 1-633111
Ferris# 22095
John Deere# AM128925
Kees# 101080
MTD# 725-3169A / 925-3169A
Snapper# 2-3355 / 23355
Troy Bilt# 1751328
Woods# 071148
430-665
O.E.M. Applications
AYP# 121305X
Exmark# 740275 / 1-740275
Husqvarna# 506 90 96-01
John Deere# AM104403
MTD# 725-3166
MTD# 925-3166
Murray# 94159
Scag# 48717
430-733
AYP# 110712X
AYP# 110721X
Plunger Interlock Switch - Double pole,
snap in mount.
Normally open / normally closed
430-742
Stop Switch for Briggs - Fits Briggs &
Stratton 4, 5.5 and 9 Hp Vanguard and 5 Hp
Industrial Plus engines.
O.E.M. Applications
AYP# 153664
AYP# 176138
Cub Cadet# 725-3164A
Cub Cadet# 925-3164A
Ferris# 22182
MTD# 725-3164A
MTD# 925-3164A
Snapper# 2-2886 / 22886
B&S# 495098
B&S# 495098S
430-666
Plunger Interlock Switch - Single pole,
right angle snap mounted, Normally open
O.E.M. Applications
Headlight Switch for AYP - Fits AYP riders.
O.E.M. Applications
O.E.M. Applications
430-663
Plunger Interlock Switch - Single pole,
right angle snap mounted, Normally closed
Twist Lock Seat Switch - Single pole,
twist lock mount. Normally closed
O.E.M. Applications
Bolens# 1768882
John Deere# AM119943
Snapper# 292112
Ariens# 27541
Ariens# 02754100
AYP# 160784
Cub Cadet# 725-3167
Cub Cadet# 925-3167
Great Dane# D38001
John Deere# Am103119
Kubota# K1122-62282
MTD# 725-3167 / 925-3167
Murray# 57211 / 024273
Scag# 48717 / 481638
Snapper# 1-5707 / 15707
Toro# 82-2190
E
24 - 23
E
BANTA
SWITCHES
ELECTRICAL / IGNITION
- Multi Application
SWITCHES
- Multi Application
Part#
Application
Part#
Application
430-508
PTO Switch - (2) position, (5) terminals.
Fits Gravely models Pro Master 200, 300 &
tractor models. John Deede models 318, 420
and 430
430-661
Plunger Interlock Switch - Double pole,
snap in mount.
Normally open / normally closed
O.E.M. Applications
MTD# 725-1657A
MTD# 925-1657A
Bobcat# 128009
Cub Cadet# 725-3022 / 925-3022
Cub Cadet# IH-107372-C1
Gravely# 45848 / 045848
John Deere# AM39489
Power King# 03-7301
Simplicity# 1675800
Snapper# 1-9545 / 19545
Toro# 37-2610 / 92-6328
Walker# 6950
430-510
PTO Switch - (2) position, (6) terminals.
Fits Ariens 936 series YT tractor models:
936002, 936003, 936004, 936005, 936006,
936008, 936009, 936010, 936011 & 936012.
430-116
Safety Switch - 15/32” mounting stem,
Open to run (black button), normally open
Fit electric start MTD riders.
O.E.M. Applications
MTD# 725-0268 / 925-0268
MTD# 725-0277 / 925-0277
Noma# 41204
O.E.M. Applications
Ariens# 36024 / 03602400
Grasshopper# 184082
Grasshopper# 604796
Scag# 48787
Woods# 70422
430-496
O.E.M. Applications
430-124
Safety Switch - 15/32” mounting stem,
Closed to run (red button), normally closed
Fit recoil start models.
O.E.M. Applications
Safety Switch - 9/16” mounting stem.
Normally closed, neutral safety
MTD# 725-0269
MTD# 925-0269
O.E.M. Applications
Gravely# 34640 / 034640
Scag# 48021
Simplicity# 1654634
Toro# 28-4250
430-494
430-382
PTO Switch - For MTD riders.
Fits models 698 and 699.
O.E.M. Applications
Safety Switch - 9/16” mounting stem.
Normally open, (2) terminal
MTD# 725-0803C / 925-0803C
O.E.M. Applications
430-662
Ariens# 29131
Encore# 363027 / 363207
Gravely# 20916 / 020916
John Deere# AM37643
Murray# 23479
Scag# 48231
Snapper# 1-6155 / 16155
430-613
Plunger Interlock Switch - Double pole,
snap in mount.
Normally open / normally closed
O.E.M. Applications
Murray# 94136
Stop Switch - Fit most Honda engines,
3/4” mounting stem, on/off indicator on plate,
Fits models GX110, GX120, GX140, GX160,
GX200, GX240, GX270, GX340 and GX390.
O.E.M. Applications
Honda# 36100-ZE1-015
Honda# 36100-883-005
430-027
Stop Switch - Fits on Stihl Chain Saws and
Cut Quik saws.
O.E.M. Applications
Stihl# 1121-430-0200
E
24 - 24
E
ELECTRICAL / IGNITION
BANTA
NEW PARTS / NOTES
E
24 - 25
E
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising