Ricoh | 480W | Operating instructions | Ricoh 480W Operating instructions

Ricoh 480W Operating instructions
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=120 // Print scale=81%
Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.000000 mm
Spain
RICOH ESPAÑA S.A.
Avda. Litoral Mar, 12-14,
Blue Building, Marina Village,
08005 Barcelona
Phone: +34-(0)93-295-7600
The Netherlands
RICOH EUROPE B.V.
Prof.W.H. Keesomlaan 1,
NL-1183 DJ Amstelveen
P.O. Box 114, NL-1180 AC Amstelveen
Phone: +31-(0)20-5474111
Italy
RICOH ITALIA SpA
Via della Metallurgia 12,
37139 Verona
Phone: +39-045-8181500
United Kingdom
RICOH UK LTD.
Ricoh House,
1 Plane Tree Crescent, Feltham,
Middlesex, TW13 7HG
Phone: +44-(0)20-8261-4000
China
RICOH CHINA CO.,LTD.
17/F., Huamin Empire Plaza, No.728
Yan An West Road,
Shanghai P.C.:200050
Phone: +86-21-5238-0222
Germany
RICOH DEUTSCHLAND GmbH
Wilhelm-Fay-Strasse 51,
D-65936 Frankfurt am Main
Phone: +49-(0)69-7104250
Singapore
RICOH ASIA PACIFIC PTE.LTD.
260 Orchard Road,
#15-01/02 The Heeren,
Singapore 238855
Phone: +65-6830-5888
480W Operating Instructions Copy Reference
480W Operating Instructions Copy Reference
Overseas Affiliates
USA
RICOH CORPORATION
5 Dedrick Place
West Caldwell, New Jersey 07006
Phone: +1-973-882-2000
480W
Operating Instructions
Copy Reference
Basics
Copying
Troubleshooting
User Tools (Copier / Document Server Features)
Specifications
France
RICOH FRANCE S.A.
383, Avenue du Général de Gaulle
BP 307-92143 Clamart Cedex
Phone: +33-(0)-821-01-74-26
Printed in the Netherlands
GB
GB
B188-6700A
B1886700A
Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety
Information in the "General Settings Guide" before using the machine.
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=120 // Print scale=81%
Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.000000 mm
Introduction
This manual contains detailed instructions and notes on the operation and use of this machine. For your
safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
place for quick reference.
Declaration of Conformity
Important
Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine.
“The Product complies with the requirements of the EMC Directive 89/336/EEC and its amending directives and the Low Voltage Directive 73/23/EEC and its amending directives.”
In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
a means POWER ON.
c means STAND BY.
Notes:
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Operator Safety
This machine contains LED Array in scanner and writing units.
In accordance with IEC 60417, this machine uses the following symbols for the anti- humidity heater
switch:
a means POWER ON.
b means POWER OFF.
Trademark
Acrobat® is a registered trademark of Adobe Systems Incorporated.
The machine is considered a class 1 LED device, safe for both office and EDP use.
Notes:
Two kinds of size notation are employed in this manual. With this machine refer to the metric version.
For good copy quality, Ricoh recommends that you use genuine Ricoh toner.
Ricoh shall not be responsible for any damage or expense that might result from the use of parts other
than genuine Ricoh parts with your Ricoh office products.
Important
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its
completeness or accuracy. If you have any questions concerning the legality of copying or printing certain items, consult with your legal advisor.
Power Source
220 - 240V, 50Hz/60Hz, 10A or more
Please be sure to connect the power cord to a power source as above. For details about power source,
see “Power Connection” in General Settings Guide.
Copyright © 2005 Ricoh Co., Ltd.
DolphinC2_GBcopy_F_FM.book Page i Friday, February 4, 2005 3:32 PM
Manuals for This Machine
The following manuals describe the operational procedures of this machine. For
particular functions, see the relevant parts of the manual.
Note
❒ Manuals provided are specific to machine type.
❒ Adobe Acrobat Reader / Adobe Reader is necessary to view the manuals as
a PDF file.
❒ Two CD-ROMs are provided:
• CD-ROM 1 “Operating Instructions”
• CD-ROM 2 “Scanner Driver and Utilities”
❖ General Settings Guide
Provides an overview of the machine and describes System Settings (such as
Tray Paper Settings), Document Server functions, and troubleshooting.
Refer to this manual for Address Book procedures such as registering e-mail
address, and user codes.
❖ Security Reference
This manual is for administrators of this machine. It describes security functions that the administrators can use to protect data from being tampered, or
prevent the machine from unauthorized use.
Also refer to this manual for the procedures for registering administrators, as
well as setting user and administrator authentication.
❖ Network Guide (PDF file - CD-ROM1)
Provides information about configuring and operating the scanner (Type 480)
in a network environment.
For details about network settings of the scanner (RW480) and printer
(RW480), see the manual that comes with the related option.
❖ Copy Reference (this manual)
Describes operations, functions, and troubleshooting for the machine's copier
function.
❖ Scanner Reference(Scanner Unit Type 480) (PDF file - CD-ROM1)
Describes operations, functions, and troubleshooting for the machine's scanner function.
i
DolphinC2_GBcopy_F_FM.book Page ii Friday, February 4, 2005 3:32 PM
❖ Manuals for DeskTopBinder Lite
DeskTopBinder Lite is a utility included on the CD-ROM labeled “Scanner
Driver and Utilities”.
• DeskTopBinder Lite Setup Guide (PDF file - CD-ROM2)
Describes installation of, and the operating environment for DeskTopBinder Lite in detail. This guide can be displayed from the [Setup] display
when DeskTopBinder Lite is installed.
• DeskTopBinder Introduction Guide (PDF file - CD-ROM2)
Describes operations of DeskTopBinder Lite and provides an overview of
its functions. This guide is added to the [Start] menu when DeskTopBinder
Lite is installed.
• Auto Document Link Guide (PDF file - CD-ROM2)
Describes operations and functions of Auto Document Link installed with
DeskTopBinder Lite. This guide is added to the [Start] menu when DeskTopBinder Lite is installed.
❖ Other manuals
• Manuals for Printer (RW480) function.
• Manuals for Scanner (RW480) function.
ii
DolphinC2_GBcopy_F_FM.book Page iii Friday, February 4, 2005 3:32 PM
What You Can Do with This Machine
AHD001S
iii
DolphinC2_GBcopy_F_FM.book Page iv Friday, February 4, 2005 3:32 PM
AHD002S
iv
DolphinC2_GBcopy_F_FM.book Page v Friday, February 4, 2005 3:32 PM
AHD003S
v
DolphinC2_GBcopy_F_FM.book Page vi Friday, February 4, 2005 3:32 PM
TABLE OF CONTENTS
Manuals for This Machine ...................................................................................... i
What You Can Do with This Machine.................................................................. iii
How to Read this Manual ......................................................................................1
Names of Major Options ............................................................................................2
Terms .........................................................................................................................2
Control Panel..........................................................................................................3
Display Panel..........................................................................................................5
1. Basics
Before Copying ......................................................................................................7
Original Output Locations...........................................................................................8
Adjusting the Original Tray....................................................................................... 10
Copy Output Locations............................................................................................. 10
Originals ............................................................................................................... 12
Sizes and Weights of Recommended Originals....................................................... 12
Placing Originals.................................................................................................. 15
Original Orientation .................................................................................................. 16
Placing Custom Size Originals................................................................................. 17
Wide Scan................................................................................................................ 17
Setting the Carrier Sheet.......................................................................................... 18
2. Copying
Basic Procedure................................................................................................... 21
Original Counter/Reset............................................................................................. 22
Auto Start ................................................................................................................. 23
Job Preset ................................................................................................................ 23
Interrupt Copy .......................................................................................................... 24
Copying from the Paper Bypass .............................................................................. 25
Copier Functions ................................................................................................. 27
Selecting Original Type Setting................................................................................ 27
Adjusting Copy Image Density ................................................................................. 28
Selecting Copy Paper .............................................................................................. 29
Setting the Length of Copy Paper Cut ..................................................................... 30
Sort/Rotate Sort ....................................................................................................... 33
Auto Reduce/Enlarge ............................................................................................... 34
User Auto Reduce/Enlarge ...................................................................................... 34
Preset Reduce/Enlarge ............................................................................................ 35
Zoom ........................................................................................................................ 36
Size Magnification .................................................................................................... 37
Directional Magnification (%) ................................................................................... 38
Directional Size Magnification (mm)......................................................................... 39
Fine Magnification .................................................................................................... 40
Combine................................................................................................................... 41
Image Repeat........................................................................................................... 42
Double Copies.......................................................................................................... 43
Positive/Negative ..................................................................................................... 43
Partial Copy.............................................................................................................. 44
Mirror Image ............................................................................................................. 45
vi
DolphinC2_GBcopy_F_FM.book Page vii Friday, February 4, 2005 3:32 PM
Format Overlay ........................................................................................................ 45
Erase Border ............................................................................................................ 47
Erase Inside ............................................................................................................. 48
Erase Outside .......................................................................................................... 49
Margin Adjustment ................................................................................................... 50
Background Numbering ........................................................................................... 51
Preset Stamp ........................................................................................................... 51
User Stamp .............................................................................................................. 53
Date Stamp .............................................................................................................. 56
Page Numbering ...................................................................................................... 57
Adjust Print Position ................................................................................................. 61
Storing Data in the Document Server ................................................................ 62
Programs .............................................................................................................. 64
Storing a Program .................................................................................................... 64
Changing a Stored Program .................................................................................... 65
Changing a Stored Program Name.......................................................................... 65
Deleting a Program .................................................................................................. 65
Recalling a Program................................................................................................. 65
3. Troubleshooting
If Your Machine Does Not Operate As You Want.............................................. 67
When a Message Appears....................................................................................... 67
Screen...................................................................................................................... 70
If You Cannot Make Clear Copies....................................................................... 71
If You Cannot Make Copies As You Want ......................................................... 74
4. User Tools (Copier / Document Server Features)
User Tools Menu (Copier / Document Server Features) .................................. 77
Accessing User Tools (Copier Features)........................................................... 82
Changing Default Settings ....................................................................................... 82
Exiting User Tools .................................................................................................... 83
Settings You Can Change with User Tools ....................................................... 84
General Features ..................................................................................................... 84
Reproduction Ratio .................................................................................................. 86
Edit ........................................................................................................................... 87
Stamp ....................................................................................................................... 90
Input / Output ........................................................................................................... 96
Administrator Tools .................................................................................................. 96
5. Specifications
Combination Chart............................................................................................... 97
Supplementary Information ................................................................................ 98
Scan Size Limitations, by Function.................................................................. 104
Settings Record Sheet....................................................................................... 105
Magnification Ratio Chart.......................................................................................108
Measure Chart .......................................................................................................109
INDEX....................................................................................................... 110
vii
DolphinC2_GBcopy_F_FM.book Page viii Friday, February 4, 2005 3:32 PM
viii
DolphinC2_GBcopy_F_FM.book Page 1 Friday, February 4, 2005 3:32 PM
How to Read this Manual
Symbols
The following set of symbols is used in this manual.
R WARNING:
This symbol indicates a potentially hazardous situation that might result in
death or serious injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the Safety Information section in the General Settings Guide.
R CAUTION:
This symbol indicates a potentially hazardous situation that might result in minor or moderate injury or property damage that does not involve personal injury
when you misuse the machine without following the instructions under this
symbol. Be sure to read the instructions, all of which are described in the Safety
Information section in the General Settings Guide.
* The statements above are notes for your safety.
Important
If this instruction is not followed, paper might be misfed, originals might be
damaged, or data might be lost. Be sure to read this.
Preparation
This symbol indicates information or preparations required prior to operating.
Note
This symbol indicates precautions for operation, or actions to take after abnormal operation.
Limitation
This symbol indicates numerical limits, functions that cannot be used together,
or conditions in which a particular function cannot be used.
Reference
This symbol indicates where further relevant information can be found.
[
]
Keys that appear on the machine's display.
{
}
Keys built into the machine's control panel.
1
DolphinC2_GBcopy_F_FM.book Page 2 Friday, February 4, 2005 3:32 PM
Names of Major Options
Major options for this machine are referred to as follows:
• Roll Holder Unit Type A→ Roll holder
• Roll Feeder Type 480→ Lower tray
• Paper Cassette Type 480 → Cut paper tray
• Original Tray Type G → Original tray
Terms
• Long length original/paper
Original/paper length longer than 1189 mm, 46.8".
2
DolphinC2_GBcopy_F_FM.book Page 3 Friday, February 4, 2005 3:32 PM
Control Panel
This illustration shows the control panel of a machine that has all options fully
installed.
AHD004S
1. Screen contrast knob
6. {Check Modes}} key
Adjusts the brightness of the screen.
Press to check the entered copying settings.
2. Indicators
Show errors or machine status. For details, see “Control Panel”, General Settings
Guide.
m: Data In indicator
L: Service Call indicator
x: Misfeed indicator
M: Open Cover indicator
D: Add Toner indicator
7. {Program}} key
3. {User Tools/Counter}} key
9. {Energy Saver}} key
• User Tools
Press to change the default settings
and operation conditions to match
your requirements. See p.77 “User
Tools (Copier / Document Server Features)”.
• Counter
Press to check or print the counter value. For details, see “Counter”, General
Settings Guide.
Press to switch to and from the Energy
Saver mode. For details, see “Saving Energy”, General Settings Guide.
4. {Job List}} key
Shows the job list. See “Job List”, General
Settings Guide.
5. Display panel
Shows operation status, error messages,
and function menus.
Press to store or select the program
mode. See p.64 “Programs”.
8. {Clear Modes}} key
Press to clear a setting's contents. The
number of copies is cleared when you
press and hold down this key for three
seconds.
10. {Interrupt}} key
Press to make interrupt copies during a
copy run. See p.24 “Interrupt Copy”.
11. Main power indicator/On indicator
When the main power switch is turned
on, the main power indicator lights.
The On indicator lights when the operation switch is on.
Important
❒ Do not turn the main power off
while the On indicator is flashing.
The hard disk may malfunction.
3
DolphinC2_GBcopy_F_FM.book Page 4 Friday, February 4, 2005 3:32 PM
12. Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off). See ”Turning On the
Power”, General Settings Guide.
13. {Sample Copy}} key
Press to make a single sample copy before starting a long copy run. By checking
the sample copy and making any necessary changes to the image quality settings
before you make multiple copies, you can
save time and paper. See p.33 “Sample
Copy”.
14. {Start}} key
Press to start scanning originals or copying. Press to start scanning and printing
in Document Server mode.
15. {Clear/Stop}} key
• Clear
Press to clear numbers entered.
• Stop
Press to stop a copy job in progress.
Press to stop scanning and printing in
Document Server mode.
16. {#}} key
Press to confirm values entered.
17. Number keys
Press to enter a value, such as the number
of copies.
18. Function keys
Press to select the following functions:
• Copy:
• Document Server:
• Scanner:
19. Function Status indicator
These show the status of the above functions:
• Yellow: selected
• Green: active
• Red: interrupted
4
DolphinC2_GBcopy_F_FM.book Page 5 Friday, February 4, 2005 3:32 PM
Display Panel
The function items displayed serve as selector keys. You can select or specify an
item by lightly pressing them.
When you select or specify an item on the display panel, it is highlighted like
this:
. Keys appearing as
cannot be used.
❖ When the lower tray (paper roll tray) is installed
❖ When the cut paper trays are installed
5
DolphinC2_GBcopy_F_FM.book Page 6 Friday, February 4, 2005 3:32 PM
6
DolphinC2_GBcopy_F_FM.book Page 7 Friday, February 4, 2005 3:32 PM
1. Basics
Before Copying
Before you start copying, specify the original and copy paper locations.
❖ Paper Capacities For Each Original/Paper Output
Original output
Capacities
Original Exit : Top
A1 (D)L or smaller:
50 sheets (plain paper)
20 sheets (translucent paper)
• Use originals that are the same size, and of medium or high quality paper.
• Do not use paper that is long length paper, thick, curled, film,
folded, or translucent paper that is less than 80 g/m2 (21.3 lb) in
weight.
• Do not load more than 10 sheets during very hot or humid conditions.
• Output thick paper (104.7 g/m2 (27.9 lb) or more) to Rear (Straight).
• Translucent paper: 80 g/m2 (21.3 lb) or less, plain paper: 52.3
g/m2 (13.9 lb) or less, and originals that are not stiff should be
output to Rear (Straight).
Original Exit : Rear
(Straight)
A0 (E) K or smaller:
1 sheet (plain paper)
1 sheet (translucent paper)
1 sheet (film)
• When output originals of A1 (E)K or larger, the ejected originals
may interfere with the copy paper and impede its progress. If this
happens, use the copy output (rear) auxiliary guide.
• When copying A0 (E) Ksize originals, remove them one by one.
Original Exit : Rear
(document roller)
A1 (D)Lor larger:
1 sheet (up to 6 m (236")) (plain
paper)
1 sheet (up to 3.6 m (141")) (translucent paper)
1 sheet (up to 3.6 m (141")) (film)
• Use face-curl originals.
• For roll originals, use originals with a diameter of roll Φ40 mm –
Φ110 mm (Φ1.6" – Φ4.3").
• Do not use the document roller when copying on originals of size
longer than the maximum length for each paper type. Use both
hands to roll the original.
7
DolphinC2_GBcopy_F_FM.book Page 8 Friday, February 4, 2005 3:32 PM
Basics
Copy output
Capacities
Copy Output: Roll paper
Front
Plain paper (at normal temperature and humidity):
99 sheets
Plain paper (at high or low 10 sheets (A1L to A2)
temperature and humidity): 99 sheets (smaller than A2)
1
Translucent paper(vellum):
10 sheets
Film:
1 sheet
Cut sheet paper Plain paper, and translucent
paper (vellum):
Film:
10 sheets
1 sheet
• Same size copy paper
• Normal temperature = 23°C
Normal humidity = 65%
Copy Output: A1 (D)K, A0 (E):
Rear
10 sheets (plain paper)
1 sheet (translucent paper)
1 sheet (film)
• Same size copy paper
• When using A0 size copy paper, attach the copy output (rear) auxiliary
guide. See p.11 “Using the rear output to eject A0 (E) KPaper”.
Important
❒ The paper capacity indicated assumes the use of standard copier paper, and
should only be used as a guide. If the paper exceeds the upper limit, the copies may become folded or cause paper jams.
Original Output Locations
The following original output locations are available:
❖ Top Original Exit
This is the basic original output location. Originals are ejected onto
the upper output stacker.
❖ Rear Original Exit (straight)
Originals are ejected onto the original output supports. When copying thick or hard originals, select
this output location.
8
❖ Rear Original Exit (document roller)
When copying rolled originals
such as long length originals, select
this output location so that originals can be rolled and stacked by
the document roller.
Note
❒ Originals of 52.3 g/m2 – 104.7
g/m2 (13.9 lb – 27.9 lb) can be
used with the document roller.
❒ Do not use the document roller
when copying originals that are
longer than the maximum
length for each paper type. Use
both hands to roll the original.
DolphinC2_GBcopy_F_FM.book Page 9 Friday, February 4, 2005 3:32 PM
Before Copying
Important
❒ When using the optional carrier
sheet, set the original output location to rear original exit. If the original output location is set to top
original exit, the original may be
damaged.
C Press [Rear
], and then press [OK].
1
Top Original Exit
A Press [Original Exit].
Rear Original Exit (Document Roller)
A Lower the document roller.
B Press [Top], and then press [OK].
ZEDH140E
B Press [Original Exit].
Rear Original Exit (Straight)
A Check that the document roller is
raised.
B Press [Original Exit].
C Press [Rear
], and then press [OK].
9
DolphinC2_GBcopy_F_FM.book Page 10 Friday, February 4, 2005 3:32 PM
Basics
D After the original has been eject-
ed, pull the document roller forward and remove the original.
Front output
A Press [Front] under Copy Output
Location.
1
Adjusting the Original Tray
When using the optional original
tray, adjust the hook position to the
size of the original.
Rear output
A Press
[Rear] under Copy Output
Location.
ZEDP071E
Copy Output Locations
The following copy output locations
are available.
❖ Front Output
When [Front] is selected, copies are
sent to the copy output tray at the
front of the machine. When copying sizes up to A1 (D)L, select
front output.
If the output copies are badly
curled, turn the paper loaded in
the cut paper trays upside down,
or remove the copies during the
copy run.
❖ Rear Output
When [Rear] is selected, copies are
sent to the copy output tray at the
back of the machine.
When copying A1 (D)K or A0
(E)K, select rear output.
10
Note
❒ When copying onto thick paper,
the last sheet to be ejected may
remain in the exit area. If this
happens, remove it.
DolphinC2_GBcopy_F_FM.book Page 11 Friday, February 4, 2005 3:32 PM
Before Copying
Using the rear output to eject A0 (E)
KPaper
When ejecting A0 (E) Ksize paper to
the rear output, the leading edge of
the paper may become caught in the
back of the copy output tray. You can
prevent this by attaching the copy
output auxiliary guide.
1
A Lower the copy output auxiliary
guide and adjust the position.
ZEDH410E
Note
❒ You do not need to use the copy
output auxiliary guide when
copying on to A1 (D), or shorter
paper.
ZEDH420E
11
DolphinC2_GBcopy_F_FM.book Page 12 Friday, February 4, 2005 3:32 PM
Basics
Originals
Sizes and Weights of Recommended Originals
1
❖ Metric version
Where original
is placed
Original size
Original weight
Original table
Standard sizes: A0K, A1KL, A2KL, A3KL,
A4KL, B1K, B2KL, B3KL, B4KL
20.9 – 157 g/m2 and
0.03 – 1 mm thick originals
Custom sizes:
Length 210 – 15000 mm
Width 210 – 950 mm
❖ Inch version
Where original
is placed
Original size
Original table
Standard sizes
5.6 - 41.8 lb. and 1.1
Mil - 40 Mil thick orig• Engineering
E(34"×44")K, D(22"×34")K L, C(17"×22")K L inals
B(11"×17")K L, A(81/2"×11")K L
• Architecture
E(36"×48")K, D(24"×36")KL, C(18"×24")K L
B(12"×18")K L, A(9"×12")K L
• 30"×42"K
Custom sizes
Length: 8.3" - 590.5"
Width: 8.3" - 37.5"
12
Original weight
DolphinC2_GBcopy_F_FM.book Page 13 Friday, February 4, 2005 3:32 PM
Originals
Originals that should be scanned using the carrier sheet
The following type of originals should be mounted on the carrier sheet. You
should also use the carrier sheet for important originals and for originals you
will copy repeatedly.
• Cut and pasted originals
• Originals with fold lines
• Wrinkled or torn originals
• Waved originals
• Punched originals
• Originals with sticky tape or adhesive
• Pasted originals
• Originals with a damaged leading edge
• Originals with surfaces that attach to glass easily such as photographs
• Originals drawn in pencil
1
Reference
p.18 “Setting the Carrier Sheet”
Non-recommended original
The following original types can cause jams, or may itself be damaged.
• Originals other than those specified in p.12 “Sizes and Weights of Recommended Originals”
• Stapled or clipped originals
• Perforated or torn originals
• Bent, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, aluminum foil, carbon paper, or conductive paper
• Originals with indexes, tags, or other projecting parts
• Sticky originals such as translucent paper
• Bound originals such as books
• Damp originals
• Badly curled originals
• Originals that vary in thickness
• Originals with sticky tape or adhesive
• Originals with thick leading edges
• Originals with wet ink or correction fluid
• Carbon-backed originals
13
DolphinC2_GBcopy_F_FM.book Page 14 Friday, February 4, 2005 3:32 PM
Basics
• Originals not made of paper (such as glass, metal)
• Originals with a roll diameter smaller than φ35 mm (φ1.4")
• Originals with a roll diameter larger than φ110 mm (φ4.3")
Flatten curled originals so they fit within the range shown below.
• Front and back curl; R 60 mm (2.4") or more, height 10 mm (0.4") or less
1
ZEDX060E
Originals that use more than 20% of the image area, may be faint.
Missing Image Area
AHD046S
As shown above, part of the original may not be copied when using paper roll
or full-size copying.
*
1: Left and right, less than 5 mm (0.2")
14
DolphinC2_GBcopy_F_FM.book Page 15 Friday, February 4, 2005 3:32 PM
Placing Originals
Placing Originals
Note
❒ Place the original after any correction fluid or ink has completely
dried. Not taking this precaution
will result in a dirtied exposure
glass and blemished copies.
❒ Dust and residue from pencil-drawn
originals can result in a dirtied exposure glass and blemished copies. We recommend using the
carrier sheet for this type of original. See p.18 “Setting the Carrier
Sheet”.
❒ If the original's rear edge is badly
curled, smooth it out with both
hands before scanning. If the original is inserted as is, it may be damaged.
❒ When copying curled originals, use
the front copy output auxiliary tray.
Reference
For details about precautions for
originals, see p.12 “Originals”.
A Adjust the original guides to the
size and orientation of the original width.
ZEDH190E
Note
❒ Make sure the original guides
are flush against the original.
❒ Do not push the original guide
side fence with force.
B Using both hands, carefully insert
1
the original between the original
guides, copy side up.
ZEDH180E
Important
❒ Once originals start to feed in,
do not push or pull them. This
may damage them.
❒ Do not operate the document
roller while originals are being
fed through the machine. Originals may be damaged.
Note
❒ Do not release your hands until
the original is pulled in. Release
when it has gone slightly in.
❒ You can change the original feed
delay setting if originals are repeatedly feeding in slanted, or if
you need to adjust the delay for
the type of originals you are using. See “Original Feed Delay
1”, General Settings Guide.
❒ If the leading edge of the original is badly curled, smooth out
the curl, and then place the original in the insertion area.
❒ When inserting long length originals, there may be some movem ent to either side . I f this
happens, correct the movement
manually while feeding the
originals into the machine.
15
DolphinC2_GBcopy_F_FM.book Page 16 Friday, February 4, 2005 3:32 PM
Basics
C Press the {#}} key after all origi-
Original Orientation
- To stop originals feeding in
Place the original of the same orientation as the copy paper on the original
table.
nals have been scanned.
1
If the originals are feeding in slanted,
or jamming, etc., press the {Scanner
Stop}
} key to stop them feeding in.
AHD005S
1. Feeding direction
ZEDH150E
Note
❒ When you press the {Scanner Stop}
}
key, the original stops immediately, which can cause it to jam. If this
happens, see “xClearing Misfeeds”, General Settings Guide.
❒ When you have set rear original
exit as the original output location,
the rear edge of the originals are
held at the output exit. To cancel
this, press the {Scanner Stop}
} key.
See p.8 “Original Output Locations”.
When you cannot place the original
as the above, you may not make copies as you want with particular functions. If this happens, change the
orientation by selecting [ ] or [ ].
Note
❒ It is recommended that you use
this function together with the
Auto Paper Select or Preset Reduce/Enlarge function.
A Press [Orientation/Custom].
B Select the original orientation, and
then press [OK].
16
DolphinC2_GBcopy_F_FM.book Page 17 Friday, February 4, 2005 3:32 PM
Placing Originals
Placing Custom Size Originals
When placing custom size originals,
specify the size of the originals.
E Press [OK].
F Place the originals, and then press
the {Start}
} key.
1
Note
❒ Paper with a vertical size of 210–
15000 mm (8.3"–590.5") and a horizontal size of 210–914 mm (8.3"–
35.9") can be specified with this
function.
Wide Scan
❒ If you do not specify the size, parts
of the image may not be copied.
Note
❒ Scan size differs depending on the
size of the original. See the following table for available scan sizes:
A Press [Orientation/Custom].
The machine checks the original
width and then increases the scan size
to a slightly larger standard size.
❖ Metric version
B Press [Custm Size Orig.].
C Enter the horizontal size
of the
original using the number keys,
and then press [#].
Note
❒ If you make a mistake, press
[Clear] or the {Clear/Stop}
} key,
and then enter the value again.
Original width
Scanning
width
Over than A4K(210 mm)
and less than 257 mm
A3K(297 mm)
Over than A3K(297 mm)
and less than 364 mm
A2K(420 mm)
Over than A2 K(420 mm)
and less than 515 mm
A1K(594 mm)
Over than A1K(594 mm)
and less than 728 mm
A0K(841 mm)
Over than A0K(841 mm)
and less than 914 mm
914 mm
Over than B4K(257 mm)
and less than 297 mm
B3K(364 mm)
Over than B3K(364 mm)
and less than 420 mm
B2K(515 mm)
Over than B2K(515 mm)
and less than 594 mm
B1K(728 mm)
Over than B1K(728 mm)
and less than 841 mm
914 mm
D Enter the vertical size of the original using the number keys, and
then press [#].
17
DolphinC2_GBcopy_F_FM.book Page 18 Friday, February 4, 2005 3:32 PM
Basics
❒ The machine adjusts to a scan size
of the same paper series as the
original. If you want to mix the sizes of A and B series when scanning, contact your service
representative.
1
❖ Inch version (Engineering)
Original width
Scanning
width
Over than AK(81/2")
and less than 9"
BK(11")
Over than BK(11") and
less than 12"
CK(17")
Over than CK(17") and
less than 18"
DK(22")
Over than DK(22") and
less than 24"
EK(34")
Over than 30" and less
than 36"
36"
Over than EK(34") and
less than 36"
36"
❖ Inch version (Architecture)
Original width
Scanning
width
Over than AK(9") and
less than 11"
BK(12")
Over than BK(12") and
less than 17"
CK(18")
Over than CK(18") and
less than 22"
DK(24")
Over than DK(24") and
less than 34"
EK(36")
Over than 30" and less
than 36"
36"
❒ The machine adjusts to a scan size
of the same paper series as the
original. If you want to mix the sizes of Engineering and Architecture
series when scanning, contact your
service representative.
18
❒ When copying custom size originals, you can use this function with
Synchro Cut to specify the copy
paper to be cut to the size of the
original.
A Press [Orientation/Custom].
B Press [Wide Scan], and then press
[OK].
C Select the paper tray.
Note
❒ When using this function, the
Auto Paper Select function does
not work. If the paper size you
select is as the same as that of
the original, part of the image
may not be copied. Select a
slightly larger standard size.
D Place the originals, and then press
the {Start}
} key.
Setting the Carrier Sheet
Important
❒ When using the optional carrier
sheet, set the original output location to rear original exit (straight).
If the original output location is set
to top original exit, or rear original
exit (document roller), the original
may be damaged.
Note
❒ When using the carrier sheet with
Synchro Cut selected, the paper is
cut to the size of the carrier sheet.
DolphinC2_GBcopy_F_FM.book Page 19 Friday, February 4, 2005 3:32 PM
Placing Originals
Reference
For details about using the carrier
sheet to make copies, see p.13
“Originals that should be scanned
using the carrier sheet”.
1
A Open
the carrier sheet with the
transparent sheet face up, and
then insert the original also face
up.
ZEDP020E
Note
❒ Align the original with the fold
of the carrier sheet.
B Using both hands, hold the original copy side up, and carefully insert the folded edge of the carrier
sheet into the insertion area.
ZEDH180E
19
DolphinC2_GBcopy_F_FM.book Page 20 Friday, February 4, 2005 3:32 PM
Basics
1
20
DolphinC2_GBcopy_F_FM.book Page 21 Friday, February 4, 2005 3:32 PM
2. Copying
Basic Procedure
Preparation
When User Code Authentication is
set, the screen for entering a user
code will be displayed. Enter your
user code (up to eight digits) using
the number keys, and then press
the {#}
} key.
Reference
For user codes, see "Registering
User Codes", General Settings
Guide.
When Basic Authentication, Windows Authentication, or LDAP
Authentication is set, the authentication screen will be displayed.
Enter your login user name and
user password, and then press
[Login]. See "When the Authentication Screen is Displayed", General
Settings Guide.
B Make
sure no previous settings
remain.
Note
❒ To clear settings, press the
{Clear Modes}
} key.
C Select
the output locations for
originals and copies, and then
prepare to use them.
Reference
p.7 “Before Copying”
D Make the necessary settings.
Note
❒ You can press the {Check Modes}
}
key to view the settings you
have made.
Note
❒ Consult the User Administrator
about your login user name and
login password.
d Ready" is shown
A Make sure "d
on the display.
If any other function is displayed,
press the {Copy}
} key on the left of
the control panel.
❖ Initial copy display
Reference
For details, see explanations of
each function.
If you use the {Program}
} key to
access the program function,
you can store and easily recall
the settings. See p.64 “Programs”.
E Enter the number of copies using
the number keys.
Note
❒ The copy quantity is from 1 to 99.
21
DolphinC2_GBcopy_F_FM.book Page 22 Friday, February 4, 2005 3:32 PM
Copying
F Place the originals.
Originals feed into the machine,
which then starts copying.
Reference
p.15 “Placing Originals”
Note
❒ When [Press Start Key] is selected in the Feed Start Method,
copying starts when you press
the {Start}
} key. See “Feed Start
Method”, General Settings
Guide”.
❒ To stop originals feeding in,
press the {Scanner Stop}
} key. See
p.16 “To stop originals feeding
in”.
❒ Insert the original so that the
right edge is aligned with the
original guide.
❒ The continuous copy speed may
be slow down to ensure the toner fuses to paper in the following cases:
• When the machine is just
turned on
• When the temperature is low
• When making a lot of continues copies (more than 30
sheets/A0, E)
2
Important
❒ When Basic Authentication, Windows Authentication, or LDAP
Authentication is set, always
log off when you have finished
using the machine to prevent
unauthorized users from using
the machine.
-To stop the machine during a
multi-copy run
Press the {Clear/Stop}
} key after the
originals have fed in. The machine
stops when the current copy finishes.
Press [Stop] to cancel the copy job;
press [Continue] to resume the interrupted copy job.
Original Counter/Reset
The number of scanned originals is
displayed in the screen's top right corner. This allows you to check the
number of originals in a job, or if any
sheets have been fed together, and the
number of copies that will be stored
in the copy output tray.
Resetting the original counter
A Press [Orig.] and the counter number
in the screen's top right corner.
The number is reset to 0.
22
DolphinC2_GBcopy_F_FM.book Page 23 Friday, February 4, 2005 3:32 PM
Basic Procedure
Auto Start
Editing Job Preset
If you make settings and scan the
originals while the message “Scanning originals can be started.”
and “Select copy mode and press
[Start].” are displayed alternately,
your copies will be made once the
machine is ready.
You can check and change the contents of preset jobs. You also can delete preset jobs.
A Press [Reserved Job].
2
Job Preset
Use this function to set up the next
copy job and scan an original when a
copy job is in progress. When the current copy job is finished, your copy
job will start automatically.
Reference
“Job List”, General Settings Guide
A Press [New Job] while ”Copying..."
B Select the number of the job you
want to check or change.
C Press [Check / Change Job].
The contents of the job are displayed.
is displayed.
To check the job contents
A Check the contents of the job.
B Press [Confirmed].
The display returns to the Reserved Job screen.
B Make settings for the next copy job.
C Place the originals. The machine
scans them.
When the current copy job finishes,
the preset job starts automatically.
Note
❒ Each job stored is allocated a job
number that is displayed on the
Reserved Job screen.
To change the job contents after
checking
A Check the contents of the job.
B Change its contents, and then press
[Confirmed].
C Press [Change].
The display returns to the Reserved Job screen.
❒ To switch the display to the current copy job press [Reserved
Job], followed by [Printing], and
then [Exit].
23
DolphinC2_GBcopy_F_FM.book Page 24 Friday, February 4, 2005 3:32 PM
Copying
To delete a job after checking its
contents
A Check the contents of the job.
B Press [Delete Job].
C Press [Delete].
2
Interrupt Copy
Use this function to interrupt a long
copy job to make urgently needed
copies.
A Press the {Interrupt}} key.
The display returns to the Reserved Job screen.
Deleting a Preset Job
A Press [Reserved Job].
AHD040S
The Interrupt key indicator lights.
B Make
the settings for the Interrupt Copy job.
B Select the number of the job you
want to delete.
C Press [Delete Job].
D Press [Delete].
The display returns to the Reserved Job screen.
Limitation
❒ You cannot make settings of the
Job Preset function.
C Place your originals.
D When copying has finished,
remove the copies output for the Interrupt Copy job.
24
DolphinC2_GBcopy_F_FM.book Page 25 Friday, February 4, 2005 3:32 PM
Basic Procedure
E Press the {Interrupt}} key again.
A Press [Bypass].
The Interrupt key indicator goes off.
Resuming the previous copy job
A Place your originals, and then
press the {Start}
} key.
2
Exiting interrupt copy
A Press the {Clear Modes}
} key.
Copying from the Paper Bypass
Use the paper bypass to copy onto paper sizes that cannot be loaded on the
paper rolls, or cut sheet paper.
B Make the necessary settings.
Reference
See explanations of each function.
C Enter the number of copies using
the number keys.
Preparation
When copying from the paper bypass, you can make multiple copies for a single original. Specify the
number of copies using the
number keys.
Limitation
❒ The maximum length is 2000 mm
(78").
❒ The width for paper in the paper
bypass is 210 – 914 mm (81/2" – 36").
❒ Do not copy on both sides of the
paper.
❒ Do not use paper already copied or
printed on.
AHD041S
D Place your original and scan it.
Reference
p.15 “Placing Originals”
E Adjust the paper bypass's paper
guides to the size of the paper.
Reference
For details about paper type, orientation, and number of sheets
that can be placed in the paper bypass, see “Copy Paper”, General
Settings Guide.
You can specify the paper type for
the paper bypass in advance. See
“Paper Type: Bypass Tray”, General Settings Guide.
AGL058S
25
DolphinC2_GBcopy_F_FM.book Page 26 Friday, February 4, 2005 3:32 PM
Copying
F Insert the paper in the paper bypass, copy side up.
The paper feeds in automatically
and copying starts.
2
AGL059S
Important
❒ Insert the paper evenly on both
sides and support it with your
hands until it feeds in.
Note
❒ Insert the paper until you hear
the beep.
❒ To make multiple copies, insert
an additional sheet after each
feeds in.
26
DolphinC2_GBcopy_F_FM.book Page 27 Friday, February 4, 2005 3:32 PM
Copier Functions
Copier Functions
Selecting Original Type Setting
The following image quality modes
are available, select one to match your
originals:
❖ Drawing
For drawings that contain fine
lines. Faint lines are clearly reproduced.
❖ Text
For originals that contain mainly
text, or printed characters.
❖ Text/Photo
For originals that contain both text
and photographs or pictures.
❖ Others – Generation
For originals that are copied. This
will copy the image while stopping
the width of the characters expanding. It also eliminates any
specks on the image.
2
Reference
Related default settings:
p.84 “Original Type Priority”
p.85 “Auto Image Density Priority”
p.85 “Copy Quality”
p.86 “Image Density”
A Press the appropriate key to select
the original type.
❖ Others – Photo
For photographs or pictures.
❖ Others – Background Lines
For images drawn on section paper
(blue or green sectioned graph paper) without copying the lines on
the paper.
Sepia lines on originals cannot be
eliminated.
❖ Others – Patched Original
For originals made up of several
pieces of smaller originals which
differ in background density. Selecting this mode tones down the
dark background of originals.
Limitation
❒ Thick lines, text, or solid images
in the patched originals are recognized as dark background
that may not be copied.
Note
❒ Press [Others] first if you want to
select other special original
types.
❒ When you select [Photo], Auto
Image Density is automatically
canceled.
27
DolphinC2_GBcopy_F_FM.book Page 28 Friday, February 4, 2005 3:32 PM
Copying
Adjusting Copy Image Density
Preparation
You can adjust the copy density to
match your originals. There are
three types of density function:
2
❖ Auto Image Density
To automatically adjust the image density.
❖ Manual Image Density
You can adjust the density of
the overall original in seven increments.
Note
❒ If Auto Image Density is not
selected, press [Auto Image
Density].
Manual image density
A If Auto Image Density is selected, press [Auto Image Density]
to cancel it.
B Press [i
iLighter] or [Darkerj
j] to
adjust the image density.
❖ Combined Auto and Manual Density
To copy originals with a dirty
background (such as newspapers). You can adjust the foreground density while leaving
the background unchanged.
Reference
Related default settings:
Combined auto and manual
density
p.85 “Auto Image Density Priority”
p.86 “Image Density”
A Make sure that [Auto Image Density] is selected.
A Select the method of image density adjustment.
Auto image density
A Make sure that [Auto Image Density] is selected.
Auto Image Density is highlighted when selected.
28
Note
❒ If Auto Image Density is not
selected, press [Auto Image
Density].
B Press [i
iLighter] or [Darkerj
j] to
adjust the image density.
DolphinC2_GBcopy_F_FM.book Page 29 Friday, February 4, 2005 3:32 PM
Copier Functions
Selecting Copy Paper
Preparation
There are two ways to select copy
paper:
❖ Auto Paper Select
The machine detects the original's size, and then automatically selects a suitable copy paper
size based on the magnification.
Auto paper select
A Make sure [Auto Paper Select] is selected.
Note
❒ When Auto Paper Select is not
selected, press [Auto Paper Select].
2
❖ When the lower tray (paper roll
tray) is installed
❖ Manual Paper Select
Select the paper roll tray, cut paper tray, or paper bypass containing the paper you want to
copy onto.
Note
❒ In Auto Paper Select mode, insert
the proper size paper in the paper
bypass or select the magnification
ratio for the paper currently loaded in the paper tray, and then set
your original again.
❖ When the cut paper trays are
installed
Reference
p.25 “Copying from the Paper Bypass”
Related default settings:
p.84 “Auto Paper Select Priority”
Note
❒ Only the paper trays set to [No
Display] or [Recycled Paper] in Paper Type and also set to [Yes] in
Apply Auto Paper Select can be
selected for the Auto Paper Select function. See “Paper Type”
in “Tray Paper Settings”, General Settings Guide.
29
DolphinC2_GBcopy_F_FM.book Page 30 Friday, February 4, 2005 3:32 PM
Copying
Manual paper select
A Select the paper tray or paper by-
pass.
The selected tray key is highlighted.
❖ When the lower tray (paper roll
tray) is installed
2
Note
❒ This function works when Auto
Paper Select is selected. See p.29
“Selecting Copy Paper”.
❒ The default for Auto Tray Switching is With image rotation. You
cannot use Rotate Copy if this setting is changed to Without image
rotation or Off. See p.84 “Auto
Tray Switching”.
Setting the Length of Copy
Paper Cut
Preparation
The following paper cut methods
are available.
❖ When the cut paper trays are
installed
❖ Synchro Cut
Cuts the paper at the same
length as the original.
If the copy is enlarged or reduced, the machine calculates
the appropriate length for the
magnification ratio and cuts the
paper.
- Rotate Copy
If the original's width is different to
that of the paper set in the paper roll
tray, or the original's orientation ( K
or L ) is different to that of the paper
loaded in the cut paper trays, this
function rotates the original image by
90 degrees, to fit it onto the copy paper.
GCROTA0E
30
❖ Preset Cut
Cuts the paper at a preset size,
regardless of the size of the original. You can use this to copy
different sized originals to the
same size.
❖ Variable Cut
Cuts the paper to the size entered.
Important
❒ Except for Synchro Cut, the paper
is cut regardless of the size of the
original.
DolphinC2_GBcopy_F_FM.book Page 31 Friday, February 4, 2005 3:32 PM
Copier Functions
Note
❒ When copying onto long paper,
the maximum length for which image quality can be guaranteed differs according to paper type and
width.
❖ Metric version
Paper 728
width mm
or
Paper
above
type
727
–
515
mm
Plain
3600 2000 2000
mm mm mm
15000
mm
Translu- 3600
cent pa- mm
per
514
–
364
mm
363
–
210
mm
Synchro cut
Note
❒ When using Synchro Cut, the paper can be cut from 210 to 15000
mm (8.3" to 590.5").
2
Limitation
❒ Depending on the original length
and paper, copy paper length may
be different from the original.
A Press [Synchro Cut].
3600 2000 2000
mm mm mm
Film
❖ Inch version (Engineering)
Paper 34"
width
22"
17"
11"
590.
5"
142"
80"
80"
142"
Translucent paper
(vellum)
142"
80"
80"
Paper
type
Plain
B Select a paper tray.
Preset cut
A Select a paper tray.
B Select a preset cut size.
Film
❖ Inch version (Architecture)
Paper 36"
width
24"
18"
12"
590.
5"
142"
80"
80"
Translu142"
cent paper
(vellum)
142"
80"
80"
Paper
type
Plain
Note
❒ The preset cut size differs dep e n d in g o n t h e r o l l p a p e r
width. It is cut in the following
sizes or standard lengths:
Film
31
DolphinC2_GBcopy_F_FM.book Page 32 Friday, February 4, 2005 3:32 PM
Copying
❖ Metric version
2
Variable cut
Roll paper
width
Preset K
Preset L
841 mm
A0K
A1L
594 mm
A1K
A2L
420 mm
A2K
A3L
297 mm
A3K
—
210 mm
A4K
—
728 mm
B1K
B2L
515 mm
B2K
B3L
364 mm
B3K
—
257 mm
B4K
—
914 mm
1219 mm
610 mm
880 mm
1219 mm
610 mm
800 mm
1189 mm
594 mm
660 mm
1189 mm
594 mm
440 mm
594 mm
297 mm
Note
❒ When using Variable Cut, the paper can be cut from 210 to 15000
mm (from 8.3" to 590.5").
A Press [Variable Cut].
B Enter the length using the number
keys, and then press [OK] or the
{#}
} key.
❖ Inch version (Engineering)
Roll paper
width
Preset K
Preset L
34"
44"
22"
22"
34"
17"
17"
22"
11"
11"
17"
—
81/2"
11"
—
❖ Inch version (Architecture)
32
Roll paper
width
Preset K
Preset L
36"
48"
24"
30"
42"
21"
24"
36"
18"
18"
24"
12"
12"
18"
—
9"
12"
—
Note
❒ To change the value, press
[Clear], and then enter the new
one.
❒ If you do not want to use Variable Cut, press [Cancel].
The entered length size is displayed on the screen.
C Select a paper tray.
DolphinC2_GBcopy_F_FM.book Page 33 Friday, February 4, 2005 3:32 PM
Copier Functions
C Place your originals.
Sort/Rotate Sort
You can put copies into sequentially
ordered sets.
❖ Sort
Put copies into sequentially ordered sets.
Note
❒ Repeat the scanning procedure
until all your originals are
scanned.
❒ To cancel Sort or Rotate Sort,
press the {Clear/Stop}
} key.
2
D After the last original is scanned,
press the {#}
} key.
Copying starts.
1
2
3
1
2
3
1
2
3
1
2
3
Sample Copy
ZEDG030E
❖ Rotate sort
Alternate sets are rotated (KL)
and delivered to the output tray.
3
2
3
3
1
2
2
1
1
1
2
3
Use this function to check the copy
settings before making a long copy
run.
Preparation
Select [Press Start Key] under Feed
Start Method in System Settings.
You cannot make sample copy
when [Auto] is selected. See “Feed
Start Method”, General Settings
Guide.
ZEDG040E
Note
❒ When using Rotate Sort, make sure
original and paper image sizes are
the same.
Reference
Related default settings:
p.84 “Auto Tray Switching”
Note
❒ This function can be used only
when the Sort function is selected.
A Select [Sort] and make any other
necessary settings, and then place
the originals.
B Press the {Sample Copy}} key.
A Press [Sort] or [Rotate Sort].
AHD042S
B Make the necessary settings.
One copy set is delivered as a sample.
33
DolphinC2_GBcopy_F_FM.book Page 34 Friday, February 4, 2005 3:32 PM
Copying
C If the sample is acceptable, press
[Print].
The specified number of copies is
made, minus one for the sample
copy.
Note
❒ If you press [Suspend] after
checking the results, return to
step A to adjust the copy settings as necessary. Depending
on the combination of functions, you may not be able to
change certain settings.
2
Auto Reduce/Enlarge
The machine chooses an appropriate
magnification based on the paper and
original sizes you select. This is useful
to copy different size originals to
same size paper.
Changing the number of sets
CP2F0100
You can change the number of copy
sets during copying.
A Press [Auto Reduce/Enlarge].
Note
❒ This function can only be used
when the Sort function is selected.
A While "Copying..." is displayed,
press the {Clear/Stop}
} key.
B Press [Change Quantity].
C Enter the number of copy sets using the number keys, and then
press the {#}
} key.
Note
❒ The number of sets you can enter differs depending on when
the {Clear/Stop}
} key is pressed.
D Press [Continue].
Copying starts again.
B Select the paper tray.
User Auto Reduce/Enlarge
Use this function to copy to a selected
size for each original size.
When the original is set, the machine
automatically enlarges or reduces the
image to fit the size of the copy paper.
Preparation
You can select the following combinations:
34
DolphinC2_GBcopy_F_FM.book Page 35 Friday, February 4, 2005 3:32 PM
Copier Functions
❖ Metric version
A Press [User Auto R/E].
Original size
Copy size
A0K
A0, A1, A2, A3, A4,
B1 JIS, B2 JIS, B3
JIS, B4 JIS
A1KL
A2KL
A3KL
2
A4KL
B1KL
B Check
that the combination selected for User Auto Reduce/Enlarge is the one you want.
B2KL
B3KL
B4KL
JIS: Japanese Industrial Standard
❖ Inch version
Original size
Copy size
Engineering
E(34"×44")K
E(34"×44"),
D(22"×34"),
D(22"×34") KL
C(17"×22"),
C(17"×22") KL B(11"×17"),
A(81/2"×11")
B(11"×17") KL
A(81/2"×11")
KL
Architecture
E(36"×48")K
E(36"×48"),
D(26"×36"),
C(18"×24"),
C(18"×24") KL B(12"×18"),
A(9"×12")
B(12"×18") KL
D(26"×36") KL
Preset Reduce/Enlarge
You can select a preset copy ratio.
You can store up to three enlargement
or reduction ratios of your own.
A(9"×12") KL
Note
❒ The default setting is to copy at
same size (full size). To change the
combination, use User Auto R/E.
See p.87 “User Auto R/E”.
❖ Metric version
Enlargement ratios:
141.4%, 200.0%, 282.8%, 400.0%
Reduction ratios:
25.0%, 35.4%, 50.0%, 70.7%
35
DolphinC2_GBcopy_F_FM.book Page 36 Friday, February 4, 2005 3:32 PM
Copying
❖ Inch version
B Select a ratio, and then press [OK].
Engineering Enlargement ratios: 129.4%,
200.0%, 258.8%, 400.0%
Reduction ratios: 25.0%,
32.4%, 50.0%, 64.7%
Architecture Enlargement ratios: 133.3%,
200.0%, 266.7%, 400.0%
2
Reduction ratios: 25.0%,
33.3%, 50.0%, 66.7%
You can store up to three ratios of
your own for frequently used ratio,
but are not preset. The ratios can be
set in 0.1% increments. See p.86 “Custom Magnification Settings 1–3”.
Zoom
You can change the magnification in
0.1% (or 1%) increments.
Note
❒ Preset ratios are set by combining
original size and paper size.
Reference
For details about the relationship
between the original and paper
sizes for preset ratios, see p.108
“Magnification Ratio Chart”.
Related default settings:
p.86 “Enlarge 1–4”
p.87 “Reduce 1–4”
p.87 “Priority Setting : Reduce /
Enlarge”
A Press [Reduce / Enlarge]
ZEDG060E
Preparation
You can set the ratio in the following ways.
• Using the number keys
• Selecting a ratio close to the one
you want to set from Preset Reduce/Enlarge, and then using
[–1%], [–0.1%], [+0.1%]or [+1%] to
adjust it
Note
❒ To set the magnification ratio on
the screen, use [–1%], [+1%]. To
specify a decimal value, use [–
0.1%]or [+0.1%]
36
DolphinC2_GBcopy_F_FM.book Page 37 Friday, February 4, 2005 3:32 PM
Copier Functions
A Press [Reduce / Enlarge].
❒ If you make a mistake, press
[–1%], [–0.1%], [+0.1%] or
[+1%] to readjust the ratio.
B Press [OK].
C Select the paper tray.
2
Size Magnification
Using the number keys
A Press [Mag. Ratio].
This function calculates an enlargement or reduction ratio based on the
specified lengths of the original and
copy.
B Enter the ratio using the number
keys.
Note
❒ Use the {·}
} key to enter a decimal point.
❒ To change the value, press
[Clear], and then enter the
new one.
C Press the {#}
} key.
ZEDG070E
Note
❒ Measure and specify the lengths of
the original and copy by comparing "A" with "a".
A Press [Reduce / Enlarge].
Selecting a ratio from the preset
ratios, and then using [–1%], [–0.1%],
[+0.1%] or [+1%] to adjust it
A Select a ratio.
B Press [–1%], [–0.1%], [+0.1%]or
[+1%] to adjust the ratio.
Note
❒ Press [–0.1%] or [+0.1%] to adjust the ratio in 0.1% increments.
B Press [Specifd. Ratio].
Make sure [Size Magnificatn] is highlighted.
37
DolphinC2_GBcopy_F_FM.book Page 38 Friday, February 4, 2005 3:32 PM
Copying
C Enter
the length of the original
using the number keys, and then
press [#].
Directional Magnification (%)
Copies can be reduced or enlarged at
different magnifications, horizontally
and vertically. Use this function to alter the image.
2
Note
❒ To change the size, press [Clear],
and then enter the new one.
❒ You can enter sizes within the
following ranges:
Metric 1–9999 mm
version (increments of 1 mm)
0.1"–99.9"
Inch
version (increments of 0.1")
D Enter the length of the copy using
the number keys.
Note
❒ To change the size, press [Clear],
and then enter the new one.
E Press [#].
CP2P01EE
a: Horizontal ratio
b: Vertical ratio
Preparation
You can set the ratio in the following ways.
• Using the number keys
• Using [n
n] or [o
o]
A Select the paper tray.
B Press [Reduce / Enlarge].
Note
❒ To change the length after pressing [#], select “Original” or
“Copy”, and then enter the
length again.
F Press [OK].
G Select the paper tray.
38
C Press [Specifd. Ratio].
DolphinC2_GBcopy_F_FM.book Page 39 Friday, February 4, 2005 3:32 PM
Copier Functions
D Press [Direct. Mag.%]
To enter the ratio using the
number keys
A Press [Horizontal].
B Enter the ratio using the number
keys, and then press [#].
Note
❒ Use the {.}
} key to enter a decimal point.
❒ To change the size, press
[Clear], and then enter the
new one.
C Press [Vertical].
D Enter the ratio using the number
keys, and then press [#].
E Press [OK].
Note
❒ Pressing [n
n] or [o
o] changes
the ratio in increments of
0.1%. Pressing and holding
down [n
n] or [o
o] changes it
in increments of 1%.
❒ If you have incorrectly entered the ratio, readjust it
with [n
n] or [o
o].
D Press [Vertical].
E Adjust the ratio using [n
n] or
[o
o].
F Press [OK].
2
E Press [OK].
Directional Size Magnification
(mm)
A suitable reproduction ratio is automatically selected when you enter the
horizontal and vertical lengths of the
original and copy image you require.
Use this function to alter the image.
To specify a ratio with [n
n] and
[o
o]
A Press [With [+][-]].
B Press [Horizontal].
C Adjust the ratio using [n
n] or
[o
o].
CP2M01EE
1. Horizontal original size
2. Vertical original size
3. Horizontal copy size
4. Vertical copy size
Preparation
Measure and specify the lengths of
the original and copy by comparing “A” with “a”.
39
DolphinC2_GBcopy_F_FM.book Page 40 Friday, February 4, 2005 3:32 PM
Copying
Note
❒ You can enter sizes within the following ranges:
2
Metric
version
1–9999 mm (increments of 1 mm)
Inch
version
0.1"–99.9" (increments of 0.1")
A Press [Reduce / Enlarge].
G Enter the length for “Copy: Vertical” using the number keys, and
then press [#].
Note
❒ To change a length, press the
key you want to change, and
then enter the new value.
H Press [OK].
I Select paper tray.
Fine Magnification
B Press [Specifd. Ratio].
C Press [Dir. Size Mag mm].
D Enter the length for “Original:
Horiz.” using the number keys,
and then press [#].
For environment reasons such as humid conditions, paper may expand or
shrink. This can result in a mismatch
between the size of the original and
copy. This function uses the measurements of the original and the copy to
calculate a ratio to produce copies
that are close to the actual size.
Preparation
Measure the length and width of
the original and the copy, and then
calculate the correction ratio as follows:
Note
❒ To change the size, press [Clear],
and then enter the new one.
E Enter the length for “Copy: Horiz.”
using the number keys, and then
press [#].
F Enter
the length for “Original:
Vertical” using the number keys,
and then press [#].
40
ZEDG010E
DolphinC2_GBcopy_F_FM.book Page 41 Friday, February 4, 2005 3:32 PM
Copier Functions
Note
❒ Fine Magnification is used for origin a ls t h a t ha ve a lre ad y b e en
scanned. If you want to apply fine
magnification corrections to paper
that has stretched due to the paper
type or exposure to humid conditions, see "Fine Ratio Adjustment:
Copier", General Settings Guide.
A Press [Reduce / Enlarge].
Note
❒ You can also make these settings in "Fine Ratio Adjustment:
Copier" under System Settings.
If you specified the ratio in both
System Settings and this function menu, the resulting settings
will be the sum of the set value.
2
Combine
Combine several pages onto one side
of a sheet.
❖ Combine 2 Pages
Copies 2 one-sided originals onto
one side of a sheet.
B Press [Fine Magnificatn.].
C Adjust the horizontal ratio using
[o
o] and [n
n].
GCSHVY7E
❖ Combine 4 Pages
Copies 4 one-sided originals onto
one side of a sheet.
D Adjust
the vertical ratio using
[o
o] and [n
n].
Note
❒ To change the value, press [Clear],
and then enter the new one.
E Press [OK].
GCSHVY8E
41
DolphinC2_GBcopy_F_FM.book Page 42 Friday, February 4, 2005 3:32 PM
Copying
❖ Combine 8 Pages
Copies 8 one-sided originals onto
one side of a sheet.
B Press [Combine].
2
C Select the number of originals to
GCSHVY3E
❖ Orientation of the original and combine image position
• Open to leftK originals
combine.
D Press [OK].
Image Repeat
The original image is copied repeatedly.
GCSHUY1E
• Open to top L originals
HE2R0100
GCSHUY2E
Reference
Related default settings:
p.88 “Erase Original Shadow in
Combine”
p.88 “Separation Line in Combine”
p.89 “Copy Order in Combine”
A Select the paper tray.
Preparation
The number of repeated images
depends on original size, copy paper size, and reproduction ratio.
• For example, you can copy eight
A4 (A) images to one sheet of
A1 (D) size paper.
Reference
Related default settings:
p.88 “Image Repeat Separation
Line”
42
DolphinC2_GBcopy_F_FM.book Page 43 Friday, February 4, 2005 3:32 PM
Copier Functions
A Press [Edit / Stamp].
A Press [Edit / Stamp].
2
B Press [Edit Image].
C Press [Image Repeat].
D Press [OK] twice.
E Select the paper tray.
B Press [Edit Image].
C Press [Double Copies].
D Press [OK] twice.
E Select the paper tray.
Double Copies
Positive/Negative
Use this function to copy an original
image twice onto one copy, as shown.
Use this function to reverse black and
white areas of the original.
ZEDG170E
Note
❒ When using Double Copies, the
copy paper must be twice as large
as the original. When using Reduce/Enlarge, consider the magnification ratio when selecting the
paper size.
ZEDG150E
Note
❒ When making continuous copies,
image density may deteriorate. See
p.71 “If You Cannot Make Clear
Copies”.
Reference
Related default settings:
p.88 “Double Copies Separation
Line”
43
DolphinC2_GBcopy_F_FM.book Page 44 Friday, February 4, 2005 3:32 PM
Copying
A Press [Edit / Stamp].
B Press [Edit Image].
C Press [Partial Copy].
D Press [Y1], and then enter the scan
start position (the length from the
leading edge of the original) using the number keys.
2
B Press [Edit Image].
C Press [Positive / Negative].
D Press [OK] twice.
E Select the paper tray.
Note
❒ To change the value, press [Clear],
and then enter the new one.
Partial Copy
Use this function to copy only a specified portion of the original.
E Press [#].
F Press [Y2], and then enter the copy
size using the number keys.
AGL040S
Reference
Related default settings:
p.89 “Partial Copy Priority”
A Press [Edit / Stamp].
44
Note
❒ The copy size (Y2) should be at
least 210 mm (8.3").
❒ The maximum length of copy
sizes is Y1 + Y2 ≤ 15000 mm
(590.6").
❒ If the length specified by “Y1”
and “Y2” is larger than the maximum, the machine shortens it.
The value entered second is adjusted based on the value entered first.
G Press [OK] three times.
DolphinC2_GBcopy_F_FM.book Page 45 Friday, February 4, 2005 3:32 PM
Copier Functions
Mirror Image
Format Overlay
Copies by reversing the image from
left to right, as reflected in a mirror.
Use this function to combine two images (original + format) onto one
copy using the first original.
You can store frequently used format
original in the machine memory and
recall them for future use.
2
ZEDG160E
A Press [Edit / Stamp].
AHD006S
A Press [Edit / Stamp].
B Press [Edit Image].
C Press [Mirror Image].
D Press [OK] twice.
B Press [Edit Image].
C Press [Format Overlay].
Using the first original as the
background original
A Press [Format Overlay].
B Make the necessary settings,
and then place the first original.
C Place the second original.
The machine makes a composite copy of the first and second
originals.
45
DolphinC2_GBcopy_F_FM.book Page 46 Friday, February 4, 2005 3:32 PM
Copying
D Place the third original.
The machine makes a composite copy of the first and third
originals.
E Place any further originals, as
required.
2
Using the stored image as the
background original
Note
❒ To use this function, you need
to program the overlay format
in ad van ce . Se e p.46 “Pro gram/Delete Overlay Format”.
Program/Delete Overlay Format
Preparation
The maximum size of original size
to be stored is A0(E). You cannot
store long length originals.
A Make sure the machine is ready to
copy.
B Press the {User Tools/Counter}} key.
A Press [Prog. Format Overlay].
B Select a stored format number.
AHD026S
C Press [Copier / Document Server Features].
C Make the necessary settings,
and then place the original to
be overlaid on the format original.
The machine makes a copy
overlaying the first original
onto the stored format original.
D Place any further originals, as
required.
The machine makes a copy
overlaying the new original
onto the stored format original.
D Press [Edit], and
then press [Program / Delete Format].
Storing
A Select a format number (1 to 4).
Note
❒ Format numbers with m
against them have already
been stored.
46
DolphinC2_GBcopy_F_FM.book Page 47 Friday, February 4, 2005 3:32 PM
Copier Functions
B Select the original orientation.
C Place the original, and then
press [Start Scanning].
The original is scanned and
stored.
D Press [Exit] twice.
Returns to the initial User Tools /
Counter display.
Overwriting a stored format
A Select a format number you
want to overwrite.
B Press [Yes].
Important
❒ You cannot restore a format
that has been overwritten.
Note
❒ Press [Stop] if you do not
want to overwrite the existing format.
C Select the original orientation.
D Place the original, and then
press [Start Scanning].
The original is scanned and
stored.
E Press [Exit] twice.
Returns to the initial User Tools /
Counter display.
Deleting
Important
❒ You cannot restore a format
that has been deleted.
Note
❒ Press [Stop] if you do not
want to delete the existing
format.
C Press [Exit] twice.
Returns to the initial User Tools /
Counter display.
2
E Press the {User Tools/Counter}} key.
The overlay format is stored or deleted, and the display returns to
the initial copy display.
Erase Border
Use this function to erase the border
area around the original image.
ZEDX080E
Preparation
The default erase border setting is
10 mm (0.4").
Reference
Related default settings:
p.88 “Erase Border Width”
A Press [Delete], and then select
the format number you want to
delete.
B Press [Delete].
47
DolphinC2_GBcopy_F_FM.book Page 48 Friday, February 4, 2005 3:32 PM
Copying
A Press [Edit / Stamp].
D Press [OK] twice.
Limitation
❒ For details about the scan size
limitations when using the
Erase Border function together
with the other functions, see
p.104 “Scan Size Limitations, by
Function”.
2
B Press [Erase].
C Press [Erase Border].
Erase Inside
Use this function to copy the original
while erasing a specified area.
Selecting [Same Width]
A Press [Same Width].
B Set the erase border width using [n
n ] and [o
o ], and then
press [OK].
ABB524S
Selecting [Diff. Width]
Note
❒ To specify the area you want to
erase, you have to define the value
of X1, Y1, X2, and Y2. Measure the
area you want to specify before entering the area settings.
A Press [Diff. Width].
B Press the key for the border
you want to change, and then
set the erase border width using [n
n] and [o
o].
AHD047S
48
C Press [OK].
❒ When using this function with
magnification, the actual setting
will be the specified setting multiplied by the reproduction ratio.
❒ You can specify up to five areas.
DolphinC2_GBcopy_F_FM.book Page 49 Friday, February 4, 2005 3:32 PM
Copier Functions
A Press [Edit / Stamp].
Erase Outside
Use this function to copy the original
while erasing outside a specified area.
2
B Press [Erase].
C Select one of the areas from [Erase
Inside 1] to [Erase Inside 5].
D Enter the length of “X1” using the
number keys, and then press [#].
ABB526S
Note
❒ To specify the area you want to
erase, you have to define the value
of X1, Y1, X2, and Y2. Measure the
area you want to specify before entering the area settings.
E Enter
the length of “X2”, “Y1”,
and “Y2” in the same way, and
then press [OK].
F To specify multiple areas, specify
areas 1 to 5, and then repeat steps
D to E.
G Press [OK] twice.
AHD047S
❒ When using this function with
magnification, the actual setting
will be the specified setting multiplied by the reproduction ratio.
A Press [Edit / Stamp].
49
DolphinC2_GBcopy_F_FM.book Page 50 Friday, February 4, 2005 3:32 PM
Copying
B Press [Erase].
C Press [Erase Outside].
D Enter the length of “X1” using the
number keys, and then press [#].
2
Note
❒ To change the value, press [Clear],
and then enter the new one.
E Enter
the length of “X2”, “Y1”,
and “Y2” in the same way.
F Press [OK] three times.
Preparation
You can select the following types
of margin for this function:
• Top (+): margin at the leading
edge of the original (top of copy).
• Bottom (+): margin at the trailing edge of the original (bottom
of copy).
The default margin setting is 20
mm (0.8").
You can specified both the top and
the bottom margins at a time.
The copy length is the specified
length plus or minus the margin.
Reference
p.31 “Synchro cut”
Related default settings:
p.89 “Margin Adjustment Priority”
A Press [Edit / Stamp].
Margin Adjustment
When Synchro Cut is selected, you
can create a margin on the copy's
leading and trailing edge.
B Press [Margin Adjustment].
C Press [Top Margin] or [Bottom Margin].
D Use [-] or [+] to specify the margin,
and then press [OK].
AHD007S
50
[Synchro Cut] is automatically selected.
DolphinC2_GBcopy_F_FM.book Page 51 Friday, February 4, 2005 3:32 PM
Copier Functions
E Press [OK].
D Enter the start number using the
number keys, and then press [OK].
Background Numbering
Use this function to have numbers
printed on the background of copies.
It can help you to keep track of confidential documents.
2
Note
❒ To change the number, press
[Clear] or the {Clear/Stop}
} key,
and then enter the new one.
E Press [OK] twice.
ZEDG190E
Preset Stamp
Note
❒ You can set the number from 1 to
999.
Use this function to print a stamp that
already stored in the machine.
❒ You can combine this function
with up to four other stamping
functions.
Reference
Related default settings:
p.90 “Size”
p.90 “Density”
A Press [Edit / Stamp].
ABB527S
• Stamp types are as follows:
B Press [Stamp].
C Press [Background Numbering].
• You can change the position and
orientation of the stamp.
• You can use this function with up
to four other stamping functions.
51
DolphinC2_GBcopy_F_FM.book Page 52 Friday, February 4, 2005 3:32 PM
Copying
❖ Setting Originals and Stamp Position/Orientation
D Select the stamp type.
2
E Press [All Pages] or [1st Page Only] to
select the print page.
Changing the stamp position,
size and density
A Press [Change].
B Select the stamp position, size
and density, and then press
[OK].
AHD008S
Note
❒ You can use only one type of
stamp at a time.
Reference
Related default settings:
p.90 “Stamp Priority”
p.90 “Stamp Language”
p.90 “Stamp Position”
p.91 “Stamp Format”
A Press [Edit / Stamp].
B Press [Stamp].
C Press [Preset Stamp].
52
F When all settings are made, press
[OK].
G Press [OK] twice.
DolphinC2_GBcopy_F_FM.book Page 53 Friday, February 4, 2005 3:32 PM
Copier Functions
❖ Setting Originals and Stamp Position/Orientation
User Stamp
You can store frequently used characters or symbols, and then use them as
a stamp.
2
ZEDG220E
Preparation
You must have a user stamp alr e a d y s t o r e d . S e e p . 54 “ P ro gram/Delete User Stamp”.
You can store up to four types of
user stamp.
Reference
To delete a stored user stamp, see
p.55 “Deleting a user stamp”.
AHD043S
• You can change the stamp position
and orientation.
Note
❒ You can use only one type of
stamp at a time.
❒ You can use this function with up
to four other stamping functions.
❒ When User Stamp is selected, it
may take longer to print the first
copy.
Reference
Related default settings:
p.92 “Stamp Position 1 - 4”
p.93 “Stamp Format 1 - 4”
53
DolphinC2_GBcopy_F_FM.book Page 54 Friday, February 4, 2005 3:32 PM
Copying
A Press [Edit / Stamp].
Program/Delete User Stamp
Note
❒ The range of stamp images for
readability is 10–432 mm high
(0.4"–17") and 10–297 mm wide
(0.4"–11"). However, if the value
exceeds the maximum area (5,000
mm2, 7.75 inch2), it is automatically
adjusted to range.
❒ Up to four frequently used images
can be stored in memory.
2
B Press [Stamp].
C Press [User Stamp].
D Select the number
for the user
stamp.
A Make sure the machine is ready to
copy.
B Press the {User Tools/Counter}} key.
E Press [All Pages] or [1st Page Only] to
select the print page.
Changing the stamp position
A Press [Change].
B Select the stamp position, and
then press [OK].
AHD026S
C Press [Copier / Document Server Features].
D Press [Stamp].
E Press [User Stamp].
F [Program / Delete Stamp].
F When all settings are made, press
Storing/Overwriting a user stamp
G Press [OK] twice.
A Press [Program], and then press
the stamp number (1–4) you
want to program.
[OK].
54
DolphinC2_GBcopy_F_FM.book Page 55 Friday, February 4, 2005 3:32 PM
Copier Functions
Note
❒ Stamp numbers displayed with
m next to them already have
settings.
F Adjust the original guides to
A3 (B)K
K or A4 (A)L
L, and then
place the original for user
stamp on the original table.
❒ If the stamp number is already in use, the machine
will ask you if you want to
overwrite it. Press [Yes] or
[No].
Important
❒ You cannot restore the stamp
after it has been overwritten.
B Enter the user stamp name using the letter keys on the display panel. You can register up
to 10 characters.
2
AGL060S
Note
❒ The upper left corner is the
base point for scanning.
Reference
“Entering Text”, General Settings Guide
C Press [OK].
D Enter the horizontal size of the
stamp using the number keys,
and then press [#].
AHD009S
1. Base point
2. Feeding direction
E Press [Vertical], and then enter
the vertical size of the stamp
using the number keys, and
then press [#].
G Press [Start Scanning].
The original is scanned, and the
stamp is registered.
Deleting a user stamp
Important
❒ You cannot restore a deleted
user stamp.
A Press [Delete], and then press
the stamp number you want to
delete.
B Select [Delete], and then press
[Exit].
C Press [Exit].
55
DolphinC2_GBcopy_F_FM.book Page 56 Friday, February 4, 2005 3:32 PM
Copying
G Press the {User Tools/Counter}} key.
The default settings are changed,
and the machine is ready to make
copies.
❖ Setting Originals and Date Stamp Position/Orientation
Date Stamp
2
Use this function to print a date
stamp on copies.
AHD010S
• There are five formats of Date
Stamp:
• MM/DD/YYYY
• MM.DD.YYYY
• DD/MM/YYYY
• DD.MM.YYYY
• YYYY.MM.DD
AHD011S
Note
❒ You can use the date stamp with
up to four other stamping functions.
Reference
Related default settings:
p.93 “Format”
p.93 “Font”
p.93 “Stamp Position”
p.94 “Stamp Setting”
p.94 “Size”
p.94 “Superimpose”
“Set Date”, General Settings Guide
A Press [Edit / Stamp].
56
DolphinC2_GBcopy_F_FM.book Page 57 Friday, February 4, 2005 3:32 PM
Copier Functions
B Press [Stamp].
C Press [Date Stamp].
D Press [All Pages] or [1st Page Only] to
select the print page.
F Press [OK] twice.
Page Numbering
Use this function to print page numbers on your copies.
This function is effective when the
Sort function is selected.
2
Changing the date format
A Press [Change Format].
B Select the date format, and
then press [OK].
• There are six types of Page Numbering (“n” is the total number of
pages in your original):
• P1, P2,…Pn
• 1/n, 2/n,...n/n
• -1-, -2-,...-n• P.1, P.2,...P.n
• 1, 2…n
• 1-1, 1-2,..1-n
Changing the stamp position
A Press [Change].
B Select the date stamp position,
and then press [OK].
E When all settings are made, press
[OK].
57
DolphinC2_GBcopy_F_FM.book Page 58 Friday, February 4, 2005 3:32 PM
Copying
❖ Stamp position and orientation of
originals
C Press [Page Numbering].
D Select the page numbering format.
2
Note
❒ You can specify the pages to be
stamped, and numbering. See
p.59 “Specifying the first printing page and start number”.
AHD012S
You can use the page numbering
stamp with up to four other stamping
functions.
Setting the stamp position
A Press [Change] on the left side.
B Select the stamp position, and
then press [OK].
Reference
Related default settings:
p.94 “Stamp Format”
p.94 “Font”
p.95 “Size”
p.95 “Page Numbering in Combine”
p.95 “Stamp Position”
p.95 “Superimpose”
A Press [Edit / Stamp].
B Press [Stamp].
58
E After
all settings are complete,
press [OK].
F Press [OK] twice.
DolphinC2_GBcopy_F_FM.book Page 59 Friday, February 4, 2005 3:32 PM
Copier Functions
Specifying the first printing page and
start number
Note
❒ The example below shows the
first printing page as “2”and the
start number as “3”.
If you selected (P1, P2…, -1-,-2-…,
P.1, P.2…, 1, 2…, )
Note
❒ The following explanation uses P1,
P2... as an example. The steps are
the same for other selections.
A Press [Change] on the right side.
B Press [First Printing Page], then enter the original page number from
which to start printing using the
number keys, and then press the
{#}
} key.
2
GCANPE2-2E
D Press [Last Number], enter the number
of the page to stop numbering using the number keys, and then
press the {#}
} key.
Note
❒ If you want to number all pages
to the end, press [to the End].
Note
❒ To change the number entered,
press [Clear] or the {Clear/Stop}
}
k ey , an d th e n e n t er a n e w
number.
E When
page designation is complete, press [OK].
F Press [OK] three times.
C Press
[Numbering from / to], enter
the number of the page from
which to start numbering using
the number keys, and then press
the {#}
} key.
59
DolphinC2_GBcopy_F_FM.book Page 60 Friday, February 4, 2005 3:32 PM
Copying
If you selected (1/5, 2/5…)
A Press [Change] on the right side.
B Press [First Printing Page], then enter the original page number from
which to start printing using the
number keys, and then press the
{#}
} key.
2
E Press [Total Pages], enter the total
number of original pages using
the number keys, and then press
the {#}
} key.
F When
page designation is complete, press [OK].
Note
❒ To change the settings after
pressing [OK], press [Change],
and then enter the numbers
again.
G Press [OK] three times.
If you selected (1-1, 1-2,…)
Note
❒ To change the number entered,
press [Clear] or the {Clear/Stop}
}
k ey , an d th e n e n t er a n e w
number.
C Press [Numbering from / to], then en-
A Press [Change] on the right side.
B Press [First Printing Page], and then
enter the original page number
from which to start printing using
number keys, and then press the
{#}
} key.
ter the number of page from
which to start numbering using
the number keys, and then press
the {#}
} key.
D Press [Last Number], then enter the
number of page at which to stop
numbering using the number
keys, and then press the {#}
} key.
Proceed to step E when not changing.
60
Note
❒ To print on the last page, press
[to the End].
❒ The last number is the last page
number printed. For example, if
[Total Pages] is ten, and you
want to print seven pages up to
page 7, enter [7] as the [Last
Number].
❒ Normally, you do not need to
enter this number.
Note
❒ To change the number entered,
press [Clear] or the {Clear/Stop}
}
k ey , an d t he n e n t er a ne w
number.
C Press [First Chapter No.], enter the
chapter number from which to
start numbering using the
number keys, and then press the
{#}
} key.
DolphinC2_GBcopy_F_FM.book Page 61 Friday, February 4, 2005 3:32 PM
Copier Functions
D Press [Numbering from / to], and then
enter th e page n umb er fro m
which to start numbering using
the number keys, and then press
the {#}
} key.
E When
page designation is complete, press [OK].
F Press [OK] three times.
Adjust Print Position
Use this function to move (shift) the
copy image up, down, left, or right to
create a margin.
Preparation
You can select the following types
of margin for this function:
• [↑
↑] (Top): shift towards the
leading edge of the original (top
of copy).
• [↓
↓] (Bottom): shift towards the
trailing edge of the original
(bottom of copy).
• [←
←] (Left): shift towards the left
of the original.
• [→
→] (Right): shift towards the
right of the original.
You can also shift in a combination
of up/down and left/right.
2
Reference
Related default settings:
p.87 “Adjust Position”
A Press [Adjust Print Position].
B Press [Adjust Print Position].
←] or [→
→] to specify
C Use [←
the
length of shift.
ZEDG110E
D Use [↑↑] or [↓↓] to specify the length
of shift.
E Press [OK] twice.
61
DolphinC2_GBcopy_F_FM.book Page 62 Friday, February 4, 2005 3:32 PM
Copying
Storing Data in the Document Server
The Document Server enables you to
store documents in memory and print
them as you want.
For details, see General Settings Guide.
2
Important
❒ Machine failure can result in data
loss. Important data stored on the
hard disk should be backed up.
The manufacturer shall not be responsible for any damage that
might result from loss of data.
Note
❒ Data stored in the Document Server is deleted after three days by setting default. You can specify a
period after which stored data is
automatically deleted. For more
information about settings, see
“Auto Delete File” in “Administrator Tools”, General Settings Guide.
A Press [Store File].
B Enter a user name, file name, or
password if necessary.
62
Reference
For details about how to register the user name, file name, or
password, see “To register or
change a user name”, and “To
set or change a password”, General Settings Guide.
C Press [OK].
D Make the scanning
settings for
the originals.
E Place the originals.
F Press the {Start}} key.
Copies are delivered, and originals
scanned and stored in memory.
Note
❒ To stop scanning, press the
{ Clear/Stop}
} key. To resume a
paused scanning job, press [Continue] in the confirmation display. To delete saved images
and cancel the job, press [Stop].
❒ Press the {#}
} key after all the
originals have been scanned.
❒ To check that the document has
been stored, press the { Document Server}
} key to display the
document selection screen.
❒ When the machine is printing a
document stored using the copier function, wait until printing
has finished before you store
another copy document.
DolphinC2_GBcopy_F_FM.book Page 63 Friday, February 4, 2005 3:32 PM
Storing Data in the Document Server
- Use the Reduce/Enlarge
function to print the stored
documents
A
B
C
D
E
F
G
Press the {Document Server}
} key.
Select the document to be printed.
Press [Print Settings].
Press [Reduce / Enlarge].
Select a ratio, and then press [OK].
Enter the number of copies using
the number keys.
Press the {Start}
} key.
2
Reference
For details about how to print
stored documents, see "Printing
Stored Documents", General Settings Guide.
63
DolphinC2_GBcopy_F_FM.book Page 64 Friday, February 4, 2005 3:32 PM
Copying
Programs
You can store frequently used copy
job settings in machine memory and
recall them for future use.
Note
❒ You can store up to 10 programs.
❒ You can select the standard mode or
Program No.10 as the default mode
to be set when modes are cleared or
reset, or immediately after the operation switch is turned on. See p.86
“Change Initial Mode”.
❒ Paper settings are stored based on
paper size. However, if you have
more than one paper tray containing the same size paper, the tray
prioritized with User Tools (System
Settings) is selected first. See “Paper
Tray Priority” in “Tray Paper Settings”, General Settings Guide.
❒ Programs are not deleted by turning the power off or pressing the
{Clear Modes}
} key. They are canceled only when you delete or
overwrite them with another program.
2
Storing a Program
A Edit the copy settings so all func-
tions you want to store in this program are selected.
B Press the {Program}} key.
D Press
the program number you
want to store.
Note
❒ Program numbers displayed with
m next to them already have
settings.
Reference
p.65 “Changing a Stored Program”
E Enter the program name using the
letter keys on the display panel.
You can enter up to 40 characters.
Reference
For details about entering characters, see “Entering Text”, General Settings Guide.
Note
❒ If you do not want to enter a
program name, proceed to step
F.
F Press [OK].
When the settings are successfully
stored, the m indicator followed
by the program number and program name will be displayed. After a while, the screen reverts back
to the initial copy display.
AHD044S
64
C Press [Register].
DolphinC2_GBcopy_F_FM.book Page 65 Friday, February 4, 2005 3:32 PM
Programs
Changing a Stored Program
Deleting a Program
A Check the program settings.
A Press the {Program}} key.
B Press [Delete].
C Press the number of the program
Note
❒ To check the contents of a program, recall it. See p.65 “Recalling a Program”.
B Repeat steps A to D of “Storing a
Program”.
C Press [Register].
Repeat steps E and F of “Storing a
Program”.
Note
❒ When overwritten, the previous
program is deleted.
Changing a Stored Program
Name
A Press the {Program}} key.
B Press [Change Name].
C Press the program number whose
program name you want to
change.
D Press [Backspace] or [Delete All], and
2
you want to delete.
D Press [Yes].
The program is deleted, and the
screen returns to the initial copy
display.
Recalling a Program
A Press the {Program}} key.
B Press [Recall].
C Press the number of the program
you want to recall.
The stored settings are displayed.
Note
❒ Program numbers displayed with
m next to them already have
settings.
D Place the originals, and then press
the {Start}
} key.
th en en ter th e n ew pr og ra m
name.
E Press [OK].
65
DolphinC2_GBcopy_F_FM.book Page 66 Friday, February 4, 2005 3:32 PM
Copying
2
66
DolphinC2_GBcopy_F_FM.book Page 67 Friday, February 4, 2005 3:32 PM
3. Troubleshooting
If Your Machine Does Not Operate As You
Want
When a Message Appears
The following chart contains explanations of common messages. If other messages appear, follow the instructions displayed.
Message
Problem/Causes
Solutions
Please wait.
The main power has just been
turned on, paper type (plain
paper/translucent paper/film) was changed, or the
machine is otherwise getting
ready.
Wait for the machine to fully
warm-up.
Note
❒ When “Scanning
originals can be
started. ” and “Select copy mode and
Place original” are
displayed alternately, you
can make the settings for
your copies and scan your
originals. After the originals have been scanned,
the machine will automatically start copying after it
has warmed-up. See p.23
“Auto Start”.
Check paper size.
Check original orientation.
An improper paper size is set. Select paper manually, do not
use Auto Paper Select.
The size of the paper loaded is
different to the size of the
copy paper size.
Check the settings for Reduce/Enlarge, etc., and then
try again.
In User Auto Reduce/Enlarge, the original is set to L.
For User Auto Reduce/Enlarge, set the original to K.
In User Auto Reduce/Enlarge, the original is set to K.
For User Auto Reduce/Enlarge, set the original to L.
67
DolphinC2_GBcopy_F_FM.book Page 68 Friday, February 4, 2005 3:32 PM
Troubleshooting
3
Message
Problem/Causes
Solutions
Memory is full.
The machine's memory is full
due to scanning originals or
performing a function. The
number of originals that can
be stored in memory depends
on the size of originals and
function settings.
• When Sort is selected,
press [Exit] to copy
scanned originals, and
then copy remaining originals.
The scanned original is too big
to rotate.
You cannot use rotate sort
with A0 (E), A1(D) originals.
An unsuitable paper size for
rotate sort has been set.
Set paper of the following paper width:
Rotate Sort is not
available with this
image size.
Select another paper
or cancel Rotate
Sort mode.
• When the Job Preset function is selected, check the
number of preset jobs, and
then try scanning the originals again.
❖ Metric version:
• 594 mm and 420 mm
(A2)
• 420 mm and 297 mm
(A3)
• 297 mm and 210 mm
(A4)
❖ Inch version (Engineering)
• 81/2" and 11" (A)
• 11" and 17" (B)
• 17" and 22" (C)
❖ Inch version (Architecture)
• 9" and 12" (A)
• 12" and 18" (B)
• 18" and 24" (C)
Maximum number of
sets is NN
The number of copies exceeds
maximum.
Change the maximum copy
quantity you can make at a
time. See p.86 “Max. Copy
Quantity”.
Original was misfed
at following point.
Open the part as
shown, then remove
it.
The original has jammed
(original misfeed).
Follow the on-screen instructions to remove the jammed
original. See “xClearing Misfeeds”, General Settings Guide.
Paper was misfed at The copy paper has jammed.
following point.
Open the part as
shown and remove it.
68
Follow the on-screen instructions to remove the jammed
paper. See “xClearing Misfeeds”, General Settings Guide.
DolphinC2_GBcopy_F_FM.book Page 69 Friday, February 4, 2005 3:32 PM
If Your Machine Does Not Operate As You Want
Message
Problem/Causes
Solutions
Add Toner
The machine is running out of
toner.
Follow the on-screen instructions to change the toner cartridge. See “DAdding
Toner”, General Settings Guide.
Cover is open as
shown. Close it.
The cover shown on the display is open.
Close the cover as shown.
Used Toner Bottle is
full.
Used Toner Bottle is full.
Call your service representative.
You do not have the The use of this function is re- Contact the administrator.
stricted to authenticated users
privileges to use
the following func- only.
tion(s).
Authentication has
failed.
The entered login user name
or login password is not correct.
Inquire the user administrator
for the correct login user name
and login password.
The machine cannot perform
authentication.
Contact the administrator.
Selected files contain file(s) that
the user does not
have access privileges to. Please
note that only the
files with access
privileges will be
deleted.
You have tried to delete files Files can be deleted by the file
without the authority to do so. creator or file administrator.
To delete a file which you are
not authorized to delete, contact the file creator.
“Updating the destination list...Please
wait. Specified destination(s) or sender's name has been
cleared.” appears, and
The destination list is being
updated from the network using SmartDeviceMonitor for
Admin. Depending on the
number of destinations to be
updated, there may be some
delay before you can resume
operation. Operations are not
possible while this message is
displayed.
operations are not possible.
3
Wait until the message disappears. Do not switch off the
power while this message is
displayed.
69
DolphinC2_GBcopy_F_FM.book Page 70 Friday, February 4, 2005 3:32 PM
Troubleshooting
Screen
Problem
Cause
Action
The screen is off.
The screen contrast knob is
turned to the dark position.
Turn the screen contrast knob
until you can see the screen.
The machine is in Energy Sav- Press the {Clear Modes/Energy
er mode.
Saver}
} key to cancel Energy
Saver mode.
The operation switch is
turned off. (The Auto Off
function has turned the machine off.)
Turn on the operation switch.
You can change the Auto Off
time. See “Auto Off Timer”,
General Settings Guide.
Cannot select the functions on
the screen.
Selected functions cannot be
used together.
See p.97 “Combination
Chart”.
There is no paper roll displayed in the paper roll tray.
The paper volume setting is
not properly set.
Load paper into the tray properly. See General Settings
Guide.
The power does not come on.
The main power switch is
turned off.
Turn on the Main power
switch. See General Settings
Guide.
3
70
DolphinC2_GBcopy_F_FM.book Page 71 Friday, February 4, 2005 3:32 PM
If You Cannot Make Clear Copies
If You Cannot Make Clear Copies
Problem
Causes
Solutions
Black or white streaks appear
on copies.
Image density is too dark.
Adjust image density. See p.28
“Adjusting Copy Image Density”.
The exposure glass or feed
roller is dirty.
Clean the exposure glass or
feed roller. See “Maintaining
Your Machine”, General Settings Guide.
The original is dusty.
Clean the original and try copying again.
3
Be particularly careful when
using the following types of
original:
• Hand drawn or drawn on
with other forms of pencil
or pen, such as a plotter.
• Film, translucent paper, or
other originals that attract
static electricity.
• Very long originals.
A shadow of the reverse side
of an original image appears
on copies.
Image density is too dark.
Adjust the image density setting. See p.28 “Adjusting
Copy Image Density”.
The background is dirty.
Image density is too dark.
Adjust the image density setting. See p.28 “Adjusting
Copy Image Density”.
The edges of pasted sections
are shown.
Image density is too dark.
Adjust the image density setting. See p.28 “Adjusting
Copy Image Density”.
Change the orientation of the
original.
Put mending tape on the pasted part.
The same copy area is dirty
whenever making copies.
The exposure glass or feed
roller is dirty.
Clean the exposure glass or
feed roller. See “Maintaining
Your Machine”, General Settings Guide.
71
DolphinC2_GBcopy_F_FM.book Page 72 Friday, February 4, 2005 3:32 PM
Troubleshooting
Problem
Causes
Solutions
Copies are too light.
Image density is too light.
Adjust the image density setting. See p.28 “Adjusting
Copy Image Density”.
Damp or rough grain paper is
used.
For good copy quality, use
recommended paper.
Note
❒ If you use coated paper
(such as thermal fax paper,
art paper, carbon paper),
damp paper, or rough
grain paper, copy image
might be too light.
3
Toner fusing is poor.
The paper thickness is not
properly set.
The copy paper is too thick.
A moire pattern appears on
copies.
Your original has a dot pattern image or many lines.
Set the paper thickness again.
See “Paper Thickness: Paper
Tray” and “Paper Thickness:
Paper Bypass”, General Settings Guide.
Change the orientation of the
original. This may prevent the
moire pattern.
Copy using “Photo” mode.
Image density is uneven.
The original has areas of solid
colour, or Positive/Negative
is selected when copying multiple sheets.
When using Repeat Copy
with originals that have areas
of solid colour, set the number
of originals as follows:
A0 – A2 (E – C): 1 sheet, A3 (B)
or smaller: 3 sheets
72
Halftone originals can cause
this problem.
Try using “Text/Photo” or
“Photo”.
Images are blurred when using translucent paper.
Translucent paper is being
used when copying multiple
sheets.
Select a proper paper thickness for the copy paper. See
“Paper Thickness: Paper
Tray” and “Paper Thickness:
Paper Bypass”, General Settings Guide.
Wrinkles appear when using
translucent paper.
An improper paper thickness
is selected.
Select a proper paper thickness for the copy paper. See
“Paper Thickness: Paper
Tray” and “Paper Thickness:
Paper Bypass”, General Settings Guide.
The paper type has recently
been changed from plain paper to translucent paper.
Wait about one minute.
DolphinC2_GBcopy_F_FM.book Page 73 Friday, February 4, 2005 3:32 PM
If You Cannot Make Clear Copies
Problem
Causes
Solutions
The background on translucent paper is dirty.
More than 50 copies are being
made of originals longer than
1189 mm (46.9") with solid
blocks of colour (2 mm × 900
mm (0.08" × 35.4") or larger.)
Select a proper paper thickness for the copy paper. See
“Paper Thickness: Paper
Tray” and “Paper Thickness:
Paper Bypass”, General Settings Guide.
Streaks, scratches, or wrinkles Copy paper has been changed
appear in areas of solid black. from plain to translucent paper, or from translucent to
plain paper.
After switching from plain to
translucent paper, wait one
minute. After switching from
translucent to plain paper,
wait two minutes before making copies.
Shadows appear on the copies.
The original is two-sided, or
the image density setting is
too dark.
Adjust the image density setting. See p.28 “Adjusting
Copy Image Density”.
Copies are blurred.
Continuous copies have been
made on small sized paper.
Wait about two minutes, and
then try copying again.
When copying on patched
originals, parts of the image
are blurred.
This may happen when the
originals are curled, folded or
creased.
Straighten curls in the originals.
When making copies with
When making copies with
50% reduction ratio, the image 50% reduction ratio, the image
density becomes dark and im- density may become dark.
ages are blurred.
Select “Sharp” in “Drawing”
under “Copy Quality” with
User Tools, and select “Drawing”as the original type. See
p.85 “Copy Quality” and p.27
“Selecting Original Type Setting”.
When the temperature and
humidity is low (below 10°C
and 15%) , image density is
uneven in dot patterns.
Select “Sharp” in “Drawing”
under “Copy Quality” with
User Tools, and select “Drawing”as the original type. See
p.85 “Copy Quality” and p.27
“Selecting Original Type Setting”
Originals with wrinkles are
used and the image density is
set too dark.
3
73
DolphinC2_GBcopy_F_FM.book Page 74 Friday, February 4, 2005 3:32 PM
Troubleshooting
If You Cannot Make Copies As You Want
This section explains causes of, and solutions for, unexpected copy results.
Problem
Causes
Solutions
Misfeeds occur frequently.
The paper is folded or
creased.
Cut away the folded or
creased part from the roll paper.
Jammed or torn paper is inside the machine.
Remove the paper properly.
See “xClearing Misfeeds”,
General Settings Guide.
The paper is curled.
Smooth out the curl and try
again.
The Erase Border setting is too
wide.
Set the Erase Border setting
narrower. See p.47 “Erase Border”.
3
Images are cropped when using Erase Border.
The margin of the original is
too narrow.
Parts of the image are not cop- The original is not placed cor- Place the original correctly.
ied.
rectly.
See p.15 “Placing Originals”.
An improper size of paper is
selected.
Select the proper paper. See
“Copy Paper”, General Settings Guide.
Print Position Adjustment or
Margin Adjustment mode is
selected.
Cancel Print Position Adjustment or Margin Adjustment
mode. See p.50 “Margin Adjustment” and p.61 “Adjust
Print Position”.
You placed a custom size orig- Enter the size of the original,
inal.
or set the scanning area wider.
See p.17 “Placing Custom Size
Originals” and p.17 “Wide
Scan”.
74
Copies are blank.
The original is not set correct- Place the original with the surly.
face to be copied on face up.
The machine does not start
copying even though you
have inserted paper into the
paper bypass.
The number of copies has not
been entered.
Enter the number of copies using the number keys. See ⇒
p.25 “Copying from the Paper
Bypass”.
DolphinC2_GBcopy_F_FM.book Page 75 Friday, February 4, 2005 3:32 PM
If You Cannot Make Copies As You Want
Problem
Causes
Solutions
Copies shift sideways.
The paper roll is not set correctly.
Set the paper roll correctly,
making sure it is straight and
not loose. See “CLoading Paper Roll”, General Settings
Guide.
The original does not match
the size in the original table
setting.
Adjust the original guides to
the specified size, and then insert the original along the
guides. See p.15 “Placing
Originals”.
The paper is not set correctly
in the paper bypass.
Make sure the paper size
matches the paper bypass's
paper guides. See p.25 “Copying from the Paper Bypass”.
Print Position Adjustment or
Margin Adjustment mode is
selected.
Cancel Print Position Adjustment or Margin Adjustment
mode. See p.50 “Margin Adjustment” and p.61 “Adjust
Print Position”.
The paper is damp.
Replace the paper with new
paper.
Copies shift in the direction of
the original feed (or opposite)
direction.
Copies are shorter than the selected size, or cut off before
the end.
Wrinkles appear on the copy.
3
Cut the paper to 1000 mm
(40") just before copying.
The paper is damp. See “Anti- Turn on the anti-humidity
humidity Heater Switch”,
heater. See “Anti-humidity
General Settings Guide.
Heater Switch”, General Settings Guide.
Copies are slanted.
The original is not straight.
Insert the original along the
original guides, so it is
straight.
Original and copy size does
not match.
Dampness can cause paper to
stretch.
Adjust the Fine Magnification
setting for Additional Copy.
See p.40 “Fine Magnification”.
You cannot combine several
functions.
The selected functions cannot
be used together.
Check the combination of settings, and set again. See p.97
“Combination Chart”.
75
DolphinC2_GBcopy_F_FM.book Page 76 Friday, February 4, 2005 3:32 PM
Troubleshooting
3
76
DolphinC2_GBcopy_F_FM.book Page 77 Friday, February 4, 2005 3:32 PM
4. User Tools (Copier /
Document Server Features)
User Tools Menu (Copier / Document
Server Features)
Note
❒ Depending on the options installed, not all items listed below may be displayed.
❖ General Features (see p.84 “General Features”)
User Tools item menu
Default
Auto Paper Select Priority
On
Auto Tray Switching
With Image Rotation
Original Type Priority
Drawing
Auto Image Density Priority
Text: On
Drawing: On
Text/Photo: On
Photo: Off
Background Lines: On
Patched Original: On
Generation Copy: On
Copy Quality
Text: Normal
Drawing: Normal
Text/Photo: Normal
Photo: Print Photo
Background Lines: Normal
Patched Original: Pale
Image Density
Text: Normal
Drawing: Normal
Text/Photo: Normal
Photo: Normal
Background Lines: Normal
Patched Original:Normal
Generation Copy: Normal
Change Initial Mode
Standard
Max. Copy Quantity
99 sheets
Job End Call
On
77
DolphinC2_GBcopy_F_FM.book Page 78 Friday, February 4, 2005 3:32 PM
User Tools (Copier / Document Server Features)
❖ Reproduction Ratio (see p.86 “Reproduction Ratio”)
User Tools item menu
Custom Magnification Settings 1–3
Default
Metric version:
• Setting 1: 70.7%
• Setting 2: 100.0%
• Setting 3: 141.4%
Inch version (Engineering):
• Setting 1: 64.7%
• Setting 2: 100.0%
• Setting 3: 129.4%
Inch version (Architecture):
• Setting 1: 66.7%
4
• Setting 2: 100.0%
• Setting 3: 133.3%
Enlarge 1–4
Metric version:
• Enlarge 1: 141.4%
• Enlarge 2: 200.0%
• Enlarge 3: 282.8%
• Enlarge 4: 400.0%
Inch version (Engineering):
• Enlarge 1: 129.4%
• Enlarge 2: 200.0%
• Enlarge 3: 258.8%
• Enlarge 4: 400.0%
Inch version (Architecture):
• Enlarge 1: 133.3%
• Enlarge 2: 200.0%
• Enlarge 3: 266.7%
• Enlarge 4: 400.0%
78
DolphinC2_GBcopy_F_FM.book Page 79 Friday, February 4, 2005 3:32 PM
User Tools Menu (Copier / Document Server Features)
User Tools item menu
Default
Reduce 1–4
Metric version:
• Reduce 1: 25.0%
• Reduce 2: 35.4%
• Reduce 3: 50.0%
• Reduce 4: 70.7%
Inch version (Engineering):
• Reduce 1: 25.0%
• Reduce 2: 32.4%
• Reduce 3: 50.0%
• Reduce 4: 64.7%
Inch version (Architecture):
• Reduce 1: 25.0%
4
• Reduce 2: 33.3%
• Reduce 3: 50.0%
• Reduce 4: 66.7%
Priority Setting: Reduce/Enlarge
100.0%
User Auto R/E
Metric version
A0 : A0/ A1 : A1/ A2 : A2/ A3 : A3/A4 : A4/B1 JIS :
B1 JIS / B2 JIS : B2 JIS / B3 JIS : B3 JIS / B4 JIS : B4 JIS
Inch version (Engineering)
34×44 : 34×44/22×34 : 22×34/17×22 :
17×22/11×17 : 11×17/81/2×11 : 81/2×11
Inch version (Architecture)
36×48 : 36×48/24×36 : 24×36/18×24 :
18×24/12×18 : 12×18/9×12 : 9×12
❖ Edit (see p.87 “Edit”)
User Tools item menu
Default
Adjust Position
Erase Brdr. Width
—
Metric version
10 mm
Inch version
0.4"
Erase Original Shadow in Combine
Yes
Image Repeat Separation Line
None
Double Copies Separation Line
None
Separation Line in Combine
None
Copy Order in Combine
From Left to Right
Program / Delete Format
—
Margin Adjustment Priority
—
Partial Copy Priority
—
79
DolphinC2_GBcopy_F_FM.book Page 80 Friday, February 4, 2005 3:32 PM
User Tools (Copier / Document Server Features)
❖ Stamp (see p.90 “Stamp”)
Default
Size
Normal
Density
Normal
Stamp Priority
COPY
Stamp Language
English
Background Numbering
User Tools item menu
4
Stamp Position
Metric version
• Position: Top Right
Preset Stamp
• Top Margin: 24 mm
• Right Margin: 24 mm
Inch version
• Position: Top Right
• Top Margin: 1.0"
• Right Margin: 1.0"
Stamp Format
Size: 1X
Density: Normal
Page to Stamp: All Pages
Program / Delete Stamp
Stamp Position: 1–4
—
Metric version
• Position: Top Right
User Stamp
• Top Margin: 24 mm
• Right Margin: 24 mm
Inch version
• Position: Top Right
• Top Margin: 1.0"
• Right Margin: 1.0"
Stamp Format: 1–4
80
All Pages
DolphinC2_GBcopy_F_FM.book Page 81 Friday, February 4, 2005 3:32 PM
User Tools Menu (Copier / Document Server Features)
User Tools item menu
Format
Default
Metric version:
DD / MM / YYYY
Inch version:MM / DD / YYYY
Font
Stamp Position
Font 1
Metric version
Date Stamp
• Position: Top Left
• Top Margin: 8 mm
• Right Margin: 32 mm
Inch version
• Position: Top Left
• Top Margin: 0.3"
4
Page Numbering
• Right Margin: 0.8"
Stamp Setting
All Pages
Size
Auto
Superimpose
No
Stamp Format
P1, P2...
Font
Font 1
Size
Auto
Page Numbering in Combine
Per Original
Stamp Position
Metric version
• Position
P1, 1/5, P.1, 1: Top Right
-1-, 1-1: Bottom Centre
Inch version
• Position
P1, 1/5, P.1, 1: Top Right
-1-, 1-1: Bottom Centre
Superimpose
No
Page Numbering Initial Letter
P1, P2.../P.1, P.2...
❖ Input / Output (see p.96 “Input / Output”)
User Tools item menu
Default
Rotate Sort: Auto Paper Continue
No
❖ Administrator Tools (see “Menu Protect”, Security Reference)
User Tools item menu
Default
Menu Protect
Level 2
81
DolphinC2_GBcopy_F_FM.book Page 82 Friday, February 4, 2005 3:32 PM
User Tools (Copier / Document Server Features)
Accessing User Tools (Copier Features)
This section is for key operators in
charge of this machine. You can
change or set the machine's default
settings.
Note
❒ Be sure to exit User Tools and return to the initial copy display after all settings are made. This
section describes system settings
you can set for the copier function.
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the {Clear
Modes}
} key is pressed.
4
Reference
For details about System Settings,
see “User Tools Menu (System Settings)”, General Settings Guide.
Note
❒ When Basic Authentication, Windows Authentication, or LDAP
Authentication is set, the authentication screen will be displayed. Enter your login name
and login password, and then
press [Login].
B Press [Copier / Document Server Features].
The Copier / Document Server
Features menu is displayed.
C Select the menu you want to make
settings.
The setting display for each menu
is displayed.
Changing Default Settings
A Press the {User Tools/Counter}} key.
Reference
p.77 “User Tools Menu (Copier
/ Document Server Features)”
D Change settings by following the
instructions on the display panel,
and then press [OK].
AHD026S
The User Tools main menu appears.
82
DolphinC2_GBcopy_F_FM.book Page 83 Friday, February 4, 2005 3:32 PM
Accessing User Tools (Copier Features)
Exiting User Tools
A After
changing default settings,
press [Exit] on the User Tools main
menu.
Changes to User Tools are complete, and the machine is ready to
copy.
4
AHD026S
Note
❒ You can also exit User Tools by
pressing the { User Tools/Counter}
} key.
83
DolphinC2_GBcopy_F_FM.book Page 84 Friday, February 4, 2005 3:32 PM
User Tools (Copier / Document Server Features)
Settings You Can Change with User Tools
For details about displaying settings, see p.82 “Accessing User Tools (Copier
Features)”.
General Features
❖ Auto Paper Select Priority
Auto Paper Select is the default
setting. You can cancel this setting.
See p.29 “Selecting Copy Paper”.
Note
❒ Default: On
4
❖ Auto Tray Switching
If you load paper of the same size in
two or more trays, the machine automatically shifts to the other when the
first tray runs out of paper (when
Auto Paper Select is selected.) This
function is called “Auto Tray Switching”. This setting specifies whether
to use Auto Tray Switching or not.
Note
❒ Default: With Image Rotation
• [With Image Rotation] Use to copy
w he n usin g th e Au to T ray
Switching function.
Limitation
❒ Paper may not rotate for some
functions.
• [Without Image Rotation] Only
copies with Auto Tray Switching if you load paper of the
same size and in the same orientation in two or more trays. If
the paper is not the same size or
in the same orientation, copying
is interrupted and the message
“Load paper.” is displayed.
ZGVX030E
1. Original
2. Paper (Tray 1)
3. Paper (Other paper tray)
4. Paper (Other paper tray)
• [Off] When a paper tray runs out
of paper, copying is interrupted
and the message “ Load paper.” is displayed.
ZGVX020E
84
1. Original
2. Paper (Tray 1)
3. Paper (Other paper tray)
4. Paper (Other paper tray)
❖ Original Type Priority
You can select the type of originals
effective when the machine is
turned on or reset, or when modes
are cleared.
Note
❒ Default: Drawing
DolphinC2_GBcopy_F_FM.book Page 85 Friday, February 4, 2005 3:32 PM
Settings You Can Change with User Tools
❖ Auto Image Density Priority
You can set whether Auto Image
Density is “On” or “Off” when the
machine is turned on, reset, or
modes are cleared.
Note
❒ Default:
• Text: On
• Drawing: On
• Text/Photo: On
• Photo: Off
• Background Lines: On
• Patched Original: On
• Generation Copy: On
❖ Copy Quality
Adjusts the finish for each original
type (Text, Drawing, Text/Photo,
Photo, Background Lines, Patched
Original, Generation Copy).
Note
❒ [Custom Setting]: Your service
representative will set this to
meet your requirements. For
details, consult your service
representative.
• Text
Adjusts line and character outline quality in the copy image.
Note
❒ Default: Normal
❒ Character outline is less defined when [Soft] is selected;
more defined when [Sharp] is
selected.
• Drawing
Adjusts the line density and
lighter sections of image.
Note
❒ Default: Normal
❒ Originals that have light pencil lines can be reproduced
with greater clarity when
[Soft] is selected. When
[Sharp] is selected, pencil
l i ne s c a n be r ep r o d u c ed
clearly with improved clarity.
• Text / Photo
You can select to prioritize the
copy image of “Text” or “Photo” when copying originals contain photographs and the text.
4
Note
❒ Default: Normal
❒ When [Normal] is selected, an
original containing a mixture
of text and photographs can
be reproduced.
• Photo
You can configure the machine
to copy originals with photographs.
Note
❒ Default: Print Photo
❒ Select [Print Photo] when copying originals with photographs such as magazines or
catalogues. A smooth finish
image can be reproduced.
❒ Select [Glossy Photo] when
copying developed photographs. The text contained
within the photographs can
be reproduced appropriately.
• Background Lines
Note
❒ Default: Normal
• Patched Original
Note
❒ Default: Pale
85
DolphinC2_GBcopy_F_FM.book Page 86 Friday, February 4, 2005 3:32 PM
User Tools (Copier / Document Server Features)
❖ Image Density
Specifies the copy image density
for each original type (Text, Drawing, Text/Photo, Photo, Background Lines, Patched Original,
Generation Copy).
Note
❒ Default: Normal
❖ Change Initial Mode
You can select standard mode or
Program No.10 as the mode effective when power is turned on, or
modes are cleared.
4
Note
❒ Default: Standard
❖ Max. Copy Quantity
Specifies the maximum number of
copies that can be set.
Note
❒ Default: 99 sheets
❒ The number can be set from 1 to
99 sheets using the number
keys.
❖ Job End Call
You can choose to have the beeper
sound when copying is complete.
Note
❒ Default: On
❒ If Panel Tone of User Tools (System Settings) settings is [On], the
machine beeps to notify you
that it did not complete a job for
reasons such as: the paper tray
ran out of paper, or a paper misfeed occurred. See “Panel
Tone”, General Settings Guide.
86
Reproduction Ratio
❖ Custom Magnification Settings 1–3
You can store up to three reproduction ratios, and have them
shown on the initial display. You
can also change registered Reduce
/ Enlarge ratios.
Enter the reproduction ratio using
the number keys.
The value can be set from 25.0% to
400.0%.
Use the {·}
} key to enter a decimal
point.
Note
❒ Default:
• Metric version:
• Settings 1: 70.7%
• Settings 2: 100%
• Settings 3: 141.4%
• Inch version: (Engineering)
• Settings 1: 64.7%
• Settings 2: 100%
• Settings 3: 129.4%
• Inch version: (Architecture)
• Settings 1: 66.7%
• Settings 2: 100%
• Settings 3: 133.3%
❖ Enlarge 1–4
You can customize available enlargement ratios by pressing [Reduce / Enlarge].
Note
❒ Default:
• Metric version:
• Enlarge 1: 141.4%
• Enlarge 2: 200%
• Enlarge 3: 282.8%
• Enlarge 4: 400%
DolphinC2_GBcopy_F_FM.book Page 87 Friday, February 4, 2005 3:32 PM
Settings You Can Change with User Tools
• Inch version: (Engineering)
• Enlarge 1: 129.4%
• Enlarge 2: 200%
• Enlarge 3: 258.8%
• Enlarge 4: 400%
• Inch version: (Architecture)
• Enlarge 1: 133.3%
• Enlarge 2: 200%
• Enlarge 3: 266.7%
• Enlarge 4: 400%
❒ When selecting [User Enlrg. Ratio], enter a ratio using the
number keys (in the range of
101.0 to 400.0%).
❖ Reduce 1–4
You can customize available reduction ratios by pressing [Reduce /
Enlarge].
Note
❒ Default:
• Metric version:
• Reduce 1: 25.0%
• Reduce 2: 35.4%
• Reduce 3: 50.0%
• Reduce 4: 70.7%
• Inch version: (Engineering)
• Reduce 1: 25.0%
• Reduce 2: 32.4%
• Reduce 3: 50.0%
• Reduce 4: 64.7%
• Inch version: (Architecture)
• Reduce 1: 25.0%
• Reduce 2: 33.3%
• Reduce 3: 50.0%
• Reduce 4: 66.7%
❒ When selecting [User Redc.Ratio], enter a ratio using the
number keys (in the range of
25.0 to 99.9%).
❖ Priority Setting : Reduce / Enlarge
You can set the ratio with priority
when [Reduce / Enlarge] is pressed.
Note
❒ Default: 100%
❒ The values you set in Enlarge 1–
4 and Reduce 1–4 can be selected here.
❖ User Auto R/E
Specifies original and copy sizes
displayed when [User Auto R/E] is
pressed. See p.34 “User Auto Reduce/Enlarge”.
Select the copy size to use with the
original size.
4
Edit
❖ Adjust Position
Specifies the default setting for
Print Position Adjustment. See
p.61 “Adjust Print Position”.
Note
❒ Default:
• Metric version: Bottom: 20 mm/
Right: 20 mm
• Inch version: Bottom: 0.8"/
Right: 0.8"
❒ You can adjust the position within the following range:
• Metric version: 0– 200 mm
(1 mm increments)
• Inch version: 0– 7.8" (0.1" increments)
87
DolphinC2_GBcopy_F_FM.book Page 88 Friday, February 4, 2005 3:32 PM
User Tools (Copier / Document Server Features)
❖ Erase Border Width
Specifies the default setting for Erase
Border. See p.47 “Erase Border”.
Note
❒ Default:
• Metric version: 10 mm
• Inch version: 0.4"
❒ The width can be set as follows:
• Metric version: 2 mm - 99 mm
(1 mm increments)
• Inch version: 0.1" - 2.0" (0.1"
increments)
4
❖ Erase Original Shadow in Combine
In Combine Copy mode, you can
specify whether to erase a 3 mm,
0.1" bounding margin around all
four edges of each original.
Note
❒ Default: None
❖ Double Copies Separation Line
Specifies a separation line when
using the Double Copies function.
• None
• Solid
• Broken A
• Broken B
Note
❒ Default: Yes
❖ Image Repeat Separation Line
Specifies a separation line type when
using the Image Repeat function.
• None
• Crop Marks
Note
❒ Default: None
• Solid
• Broken A
• Broken B
• Crop Marks
88
❖ Separation Line in Combine
Specifies a separation line when
using the Combine function.
• None
• Solid
• Broken A
DolphinC2_GBcopy_F_FM.book Page 89 Friday, February 4, 2005 3:32 PM
Settings You Can Change with User Tools
❖ Margin Adjustment Priority
Specifies the default setting for the
margin size.
You can set the top and bottom
margin sizes. See p.50 “Margin
Adjustment”.
• Broken B
• Crop Marks
Note
❒ Default: None
❖ Copy Order in Combine
You can set the copy order to Left
to Right or Top to Bottom when using the Combine function .
Note
❒ Default:
• Metric version: Up 20 mm Down
20 mm
• Inch version: Up 0.8" Down 0.8"
❒ The size can be set as follows:
• Metric version: 0 to 200 mm
(1 mm increments)
• Inch version: 0 to 7.9" (0.1" increments)
4
❖ Partial Copy Priority
Specifies the default settings of the
start position (Y1) and the copy
size (Y2).
GCAH090E
Note
❒ Default: From Left to Right
❖ Program / Delete Format
Stores a format (background) image for use with Format Overlay.
You can store up to four formats.
See p.45 “Format Overlay” and
p.46 “Program/Delete Overlay
Format”.
Note
❒ Default:
• Metric version: Y1: 0 mm, Y2:
210 mm
Inch version: Y1: 0", Y2: 8.3"
❒ The size can be set as follows:
• Metric version: Y1: 0 to 14790
mm (1 mm increments), Y2:
210 mm to 15000 mm (1 mm
increments)
• Inch version: Y1: 0 to 582.3"
(0.1" increments), Y2: 8.3" to
590.6"
89
DolphinC2_GBcopy_F_FM.book Page 90 Friday, February 4, 2005 3:32 PM
User Tools (Copier / Document Server Features)
Stamp
Background Numbering
❖ Size
Make settings for the size of background numbers. See p.51 “Background
Numbering”.
Note
❒ Default: Normal
❖ Density
Make settings for the density of background numbers. See p.51 “Background
Numbering”.
4
Note
❒ Default: Normal
Preset Stamp
❖ Stamp Priority
You can select the stamp type given priority when [Preset Stamp] is pressed.
See p.51 “Preset Stamp”.
Note
❒ Default: COPY
❖ Stamp Language
You can select the language of the stamp.
Note
❒ Default: English
❖ Stamp Position
You can set the position where the stamp is printed.
Press the arrow keys to adjust the position.
Note
❒ Default:
• Metric version:
• Position: Top Right
• Top Margin: 24 mm
• Right Margin: 24 mm
90
DolphinC2_GBcopy_F_FM.book Page 91 Friday, February 4, 2005 3:32 PM
Settings You Can Change with User Tools
• Inch version:
• Position: Top Right
• Top Margin: 1.0"
• Right Margin: 1.0"
4
❖ Stamp Format
You can adjust the stamp's size, density, and print page.
• Size
You can set the size of the stamp.
Note
❒ Default: 1 X
• Density
You can set the pattern used to print the stamp.
Note
❒ Default: Normal
❒ Normal: The stamp is printed on the image. You cannot check which
parts will overlap.
❒ Lighter: The image can be seen through the stamp.
❒ Lightest: The image appears even clearer than in the Lighter setting.
• Print Page
You can have the stamp printed on the first page or all pages.
Note
❒ Default: All Pages
91
DolphinC2_GBcopy_F_FM.book Page 92 Friday, February 4, 2005 3:32 PM
User Tools (Copier / Document Server Features)
User Stamp
❖ Program / Delete Stamp
You can store, change, or delete a design of your choice as a user stamp.
Note
❒ You can store up to four user stamps. See p.53 “User Stamp”.
Reference
For details about deleting user stamps, see p.54 “Program/Delete User
Stamp”.
❖ Stamp Position 1 - 4
You can set the position where the stamp is printed.
Press the arrow keys to adjust the position.
4
Note
❒ Default:
• Metric version:
• Position: Top Right
• Top Margin: 24 mm
• Right Margin: 24 mm
• Inch version:
• Position: Top Right
• Top Margin: 1.0"
• Right Margin: 1.0"
92
DolphinC2_GBcopy_F_FM.book Page 93 Friday, February 4, 2005 3:32 PM
Settings You Can Change with User Tools
❖ Stamp Format 1 - 4
You can adjust the print page for User Stamps 1 to 4 already registered.
• Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
Note
❒ Default: All Pages
Date Stamp
❖ Format
You can specify the date stamp format.
Note
❒ Default:
• Metric version: DD / MM / YYYY
• Inch version: MM / DD / YYYY
4
❖ Font
You can select the Date Stamp font.
Note
❒ Default: Font 1
❒ This setting is linked to the Page Numbering function.
❖ Stamp Position
You can set the position where the stamp is printed.
Press the arrow keys to adjust the position.
Note
❒ Default:
• Metric version:
• Position: Top Left
• Top Margin: 8 mm
• Left Margin: 32 mm
• Inch version:
• Position: Top Left
• Top Margin: 0.3"
93
DolphinC2_GBcopy_F_FM.book Page 94 Friday, February 4, 2005 3:32 PM
User Tools (Copier / Document Server Features)
• Left Margin: 0.8"
❖ Stamp Setting
You can have the date printed on the first page or all pages.
4
Note
❒ Default: All Pages
❖ Size
You can set the Date Stamp size.
Note
❒ Default: Auto
❖ Superimpose
You can have the Date Stamp printed in white where it overlaps black parts
of the image.
Note
❒ Default: No
Page Numbering
❖ Stamp Format
You can select the page number format given priority when [Page Numbering]
is pressed.
Note
❒ Default: P1, P2...
❖ Font
You can select the page number font.
Note
❒ Default: Font 1
94
DolphinC2_GBcopy_F_FM.book Page 95 Friday, February 4, 2005 3:32 PM
Settings You Can Change with User Tools
❖ Size
You can set the size of the page number.
Note
❒ Default: Auto
❖ Page Numbering in Combine
You can set page numbering when using the Combine and Page Numbering
function together.
Note
❒ Default: Per Original
❖ Stamp Position
P1, P2... Stamp Position: 1/5, 2/5... Stamp Position: –1–, –2–... Stamp Position:
P.1, P.2. Stamp Position: 1, 2... Stamp Position: 1–1, 1–2...
You can set the position where the stamp is printed.
Press the arrow keys to adjust the position.
4
❖ Superimpose
You can have page numbers printed in white where they overlap black parts
of the image.
Note
❒ Default: No
95
DolphinC2_GBcopy_F_FM.book Page 96 Friday, February 4, 2005 3:32 PM
User Tools (Copier / Document Server Features)
Input / Output
❖ Rotate Sort: Auto Paper Continue
You can continue copying when
paper of the required orientation
has run out during rotate-sorting.
See p.33 “Sort/Rotate Sort”.
Note
❒ If you select [No] :
• When paper of the required
orientation runs out, the machine stops copying and
prompts you to supply copy
paper. When you load paper,
the machine will continue
copying.
❒ If you select [Yes] :
• Copying continues using copy
paper of a different orientation. The copy job will finish
even if the machine is left unattended.
❒ Default: No
4
Administrator Tools
❖ Menu Protect
You can prevent unauthenticated
users from changing User Tools
settings.
For details, consult the administrator.
96
DolphinC2_GBcopy_F_FM.book Page 97 Friday, February 4, 2005 3:32 PM
5. Specifications
Combination Chart
The combination chart below shows modes that can be used together. The following tables explains the symbols used in the chart.
means that these functions can be used together.
×
means that these functions cannot be used together. The second
function selected will be the function you are working in.
$
means that these functions cannot be used together. The first function selected will be the function you are working in.
AHD013S
*1: When there is no appropriate preset cut size paper in the selected tray, the
function selected first has priority.
97
DolphinC2_GBcopy_F_FM.book Page 98 Friday, February 4, 2005 3:32 PM
Specifications
Supplementary Information
❖ Auto Start
• The warm-up time is longer when scanning long length originals.
❖ Job Preset
• When the paper size in Job Preset is as the same as that of the copy job in
progress, the number of sheets that can be set is as follows:
❖ Metric version:
5
Paper size
Maximum number of sheets
A0
50 sheets *1
A1
100 sheets
A2
200 sheets
A3
400 sheets
A4
400 sheets
❖ Inch version:
Paper size
Maximum number of sheets
E
50 sheets *1
D
100 sheets
C
200 sheets
B
400 sheets
A
400 sheets
*1
Depending on the settings, you may be able to preset more sheets than the
maximum number.
• The maximum number of jobs that can be preset is 9.
• Depending on the size of original, you may not be able to preset more jobs
even if below the maximum.
❖ Selecting Copy Paper
• If you change the paper type, copying may take longer to start.
• When Auto Paper Select is selected, copying may take slightly longer since
the machine selects the copy paper after scanning the original.
98
DolphinC2_GBcopy_F_FM.book Page 99 Friday, February 4, 2005 3:32 PM
Supplementary Information
❖ Sort
• You can use Sort for copy sizes up to A0(E).
• The number of originals that can be scanned for Sort is as follows:
Paper size
Number of sheets
A0(E)
50 sheets
A1(D)
100 sheets
A2(C)
200 sheets
A3(B)
400 sheets
A4(A)
400 sheets
❖ Rotate Sort
• You can use the following paper sizes with Rotate Sort:
Metric version
420 mm × 297 mm (A3)KL
594 mm × 420 mm (A2)KL
5
841 mm × 594 mm (A1)KL
515 mm × 364 mm (B3 JIS)KL
728 mm × 515 mm (B2 JIS)KL
Inch version
11" × 17" (B)KL
(Engineering)
17" × 22" (C)KL
Inch version
12" × 18" (B)KL
(Architecture)
18" × 24" (C)KL
22" × 34" (D)KL
24" × 36" (D)KL
• The number of originals that can be scanned for Rotate Sort is as follows:
Paper size
Number of sheets
A2(C)
200 sheets
A3(B)
400 sheets
A4(A)
400 sheets
❖ Preset Reduce/Enlarge
• You can set the magnification ratio from 25.0 to 400.0%.
• You can select one of 8 preset ratios (4 enlargement ratios, 4 reduction ratios).
• The relationship between original size and paper size enlarged/reduced
by the preset ratios is as follows:
99
DolphinC2_GBcopy_F_FM.book Page 100 Friday, February 4, 2005 3:32 PM
Specifications
❖ Metric version
5
Ratio (%)
Original size → Paper size
400.0 (16 times in area ratio)
A4→A0
282.8 (8 times in area ratio)
A3→A0, A4→A1, B4→B1
200.0 (twice in area ratio)
A2→A0, A3→A1, A4→A2, B3→B1,
B4→B2
141.4 (1/2 in area ratio)
A1→A0, A2→A1, A3→A2, A4→A3,
B2→B1, B3→B2, B4→B3
70.7 (1/4 in area ratio)
A0→A1, A1→A2, A2→A3, A3→A4,
B1→B2, B2→B3, B3→B4
50.0
A0→A2, A1→A3, A2→A4, B1→B3,
B2→B4
35.4
A0→A3, A1→A4, B1→B4
25.0
A0→A4
❖ Inch version (Engineering)
Ratio(%)
Original size → Paper size
400.0
A→E
258.8
A → D, B → E
200.0
A → C, B → D, C → E
129.4
A → B, B → C, C → D, D → E
64.7
B → A, C → B, D → C, E → D
50.0
C → A, D → B, E → C
32.4
D → A, E → B
25.0
E→A
❖ Inch version (Architecture)
100
Ratio(%)
Original size → Paper size
400.0
A→E
266.7
A → D, B → E
200.0
A → C, B → D, C → E
133.3
A → B, B → C, C → D, D → E
66.7
B → A, C → B, D → C, E → D
50.0
C → A, D → B, E → C
33.3
D → A, E → B
25.0
E→A
• You can select a ratio regardless of original size, or paper roll cut method.
With certain ratios, parts of the image might not copy or margins will appear.
DolphinC2_GBcopy_F_FM.book Page 101 Friday, February 4, 2005 3:32 PM
Supplementary Information
❖ Zoom
• You can set the magnification ratio from 25.0 to 400.0%.
• You can select a ratio regardless of original size, or paper roll cut method.
With certain ratios, parts of the image might not copy or margins will appear.
❖ Size Magnification
• You can set the magnification ratio from 25.0 to 400.0%.
• If the calculated ratio is over the maximum or under the minimum ratio, it
is automatically adjusted within the available range. With certain ratios,
parts of the image might not copy or margins will appear.
• You cannot use Size Magnification if Auto Paper Select is selected.
❖ Directional Magnification (%)
• You can set the magnification ratio from 25.0 to 400.0%.
• You can enter a ratio (%) regardless of original and copy paper size. With
certain ratios, parts of the image might not copy or margins will appear.
5
❖ Directional Size Magnification
• You can set the magnification ratio from 25.0 to 400.0%.
• If the calculated ratio is over the maximum or under the minimum ratio, it
is automatically adjusted within the available range. With certain ratios,
parts of the image might not copy or margins will appear.
• You cannot use Directional Size Magnification if Auto Paper Select is selected.
❖ Fine Magnification
• When using Fine Magnification, moiré patterns may be noticeable, or the
image quality may deteriorate depending on the image patterns of the
originals.
❖ Image Repeat
• Depending on paper size and reproduction ratio, the repeated images may
be cropped.
• You can use Image Repeat for copy sizes up to A0(E).
• If you have used Image Repeat with the stamp function, you cannot delete
only the repeated image when using Additional Copy.
• When using Image Repeat with the Adjust Print Position function together, the repeated images will be shifted as a whole.
• When using Image Repeat with the Format Overlay function together, the
composite image will be repeated.
❖ Double Copies
• You can copy an image up to A2 (C) K size using Double Copies. You can
use paper sizes up to A0 (E) K.
101
DolphinC2_GBcopy_F_FM.book Page 102 Friday, February 4, 2005 3:32 PM
Specifications
❖ Format Overlay
• When the sizes of the format (background original) and original to be overlaid on the format are different, the image is created at the size of the overlaid original.
• The maximum paper size is A0 (E). However, if you create a copy using
A0(E) size paper, the composite image data is lost.
• When scanning the format (background original), the output image may
be blurred. If this happens, copy the format, and then use it as the background original.
• When using the Format Overlay function, image quality may deteriorate.
• You cannot change the image density of a format original. To achieve a desired image density, scan an original with the image density changed beforehand.
❖ Erase Border
• You can specify the width of the erased border margins from 2 to 99 mm
(0.1" to 3.9") in increments of 1 mm (0.1").
5
❖ Erase Inside
• By combining “Erase Inside 1”– ”Erase Inside 5”, you can erase up to 5 areas at the same time.
❖ Margin Adjustment
• You can specify margins from 0 to 200 mm (0 to 7.9") in increments of 1 mm
(0.1").
❖ Preset Stamp
• You can stamp onto paper sizes up to A0 (E) K.
• When you change the size of the stamp, it may be cropped depending on
the paper size.
❖ User Stamp
• You can stamp onto paper sizes up to A0 (E) K.
❖ Date Stamp
• You can stamp onto paper sizes up to A0 (E) K.
❖ Page Numbering
• When using page numbering with the paper bypass selected, the stamp
position is based on original size multiplied by the magnification ratio.
102
DolphinC2_GBcopy_F_FM.book Page 103 Friday, February 4, 2005 3:32 PM
Supplementary Information
❖ Adjust Print Position
• You can adjust the print position from 200 mm (7.9") left to 200 mm (7.9")
right, and from 200 mm (7.9") up to 200 mm (7.9") down in increments of 1
mm (0.1").
• If you set the margin too long for the original, parts of the image might not
copy.
• When using with the stamp functions, the stamp position moves according
to the orientation and length of the print position setting.
• You can use this function for copy sizes up to A0 (E) K.
5
103
DolphinC2_GBcopy_F_FM.book Page 104 Friday, February 4, 2005 3:32 PM
Specifications
Scan Size Limitations, by Function
The following chart shows scan size limitations for the Adjust Print Position,
Margin Adjustment, Edit, and Stamp functions.
Adjust Print Position
A0(E) or smaller
Margin Adjustment
15 m or smaller
Format Overlay
A0(E)
Erase
Erase Inside
A0(E) or smaller, 5 locations
Erase Outside
15 m or smaller
Erase Inside, Erase Border, and
Format Overlay Combinations
A0(E)
Erase Outside and Format Overlay Combinations
A0(E)
Positive/Negative
5
Mirror Image
15 m or smaller
Double Copies
A0(E)
Image
Repeat
with no other modes
A0(E)
with Erase Border
A0(E)
with Format Overlay
Stamp
104
15 m or smaller
A0(E)
A0(E)
DolphinC2_GBcopy_F_FM.book Page 105 Friday, February 4, 2005 3:32 PM
Settings Record Sheet
Settings Record Sheet
❖ Program Record Sheet
5
AHD014S
Make copies of this sheet to keep a record of your program settings.
105
DolphinC2_GBcopy_F_FM.book Page 106 Friday, February 4, 2005 3:32 PM
Specifications
❖ Stored Format Record Sheet
5
AHD015S
Make copies of this sheet to keep a record of your format settings.
106
DolphinC2_GBcopy_F_FM.book Page 107 Friday, February 4, 2005 3:32 PM
Settings Record Sheet
❖ User Stamp Record Sheet
5
Make copies of this sheet to keep a record of your user stamps.
107
DolphinC2_GBcopy_F_FM.book Page 108 Friday, February 4, 2005 3:32 PM
Specifications
Magnification Ratio Chart
❖ Metric version
Copy size (mm)
Original size
% A0
A1/B1
A2/B2
A3/B3
A4/B4
A0
100.0
70.7
50.0
35.4
25.0
A1/B1
141.4
100.0
70.7
50.0
35.4
A2/B2
200.0
141.4
100.0
70.7
50.0
A3/B3
282.8
200.0
141.4
100.0
70.7
A4/B4
400.0
282.8
200.0
141.4
100.0
D
C
B
A
❖ Inch version (Engineering)
Copy size (in)
5
Original size
% E
E
100.0
64.7
50.0
32.4
25.0
D
129.4
100.0
64.7
50.0
32.4
C
200.0
129.4
100.0
64.7
50.0
B
258.8
200.0
129.4
100.0
64.7
A
400.0
258.8
200.0
129.4
100.0
❖ Inch version (Architecture)
Copy size (in)
Original size
% E
108
D
C
B
A
E
100.0
66.7
50.0
33.3
25.0
D
133.3
100.0
66.7
50.0
33.3
C
200.0
133.3
100.0
66.7
50.0
B
266.7
200.0
133.3
100.0
66.7
A
400.0
266.7
200.0
133.3
100.0
DolphinC2_GBcopy_F_FM.book Page 109 Friday, February 4, 2005 3:32 PM
Settings Record Sheet
Measure Chart
❖ Metric version
Width × Length (mm)
A0
841 × 1189
A1
594 × 841
A2
420 × 594
A3
297 × 420
A4
210 × 297
B1
728 × 1030
B2
515 × 728
B3
364 × 515
B4
257 × 364
5
❖ Inch version (Engineering)
Width × Length (in)
E
34 × 44
D
22 × 34
C
17 × 22
B
11 × 17
A
81/2 × 11
❖ Inch version (Architecture)
Width × Length (in)
E
36 × 48
D
24 × 36
C
18 × 24
B
12 × 18
A
9 × 12
109
DolphinC2_GBcopy_F_FM.book Page 110 Friday, February 4, 2005 3:32 PM
INDEX
A
Accessing user tools (Copier Features), 82
Adjusting copy image density, 28
Adjust Position, 87
Adjust print position, 61, 103
Administrator Tools, 96
Auto image density, 28
Auto image density priority, 85
Auto paper select, 29
Auto paper select priority, 84
Auto reduce/enlarge, 34
Auto start, 23, 98
Auto tray switching, 84
B
Background Lines, 27
Background No.
density, 90
size, 90
Background numbering, 51, 90
Basic procedure, 21
Basics, 7
Before Copying, 7
C
Change initial mode, 86
Changing
number of sets, 34
stored program, 65
Check Modes key, 3
Clear Modes key, 3
Clear/Stop key, 4
Combination chart, 97
Combine, 41
Combined auto and manual density, 28
Control panel, 3
Copier functions, 27
Copying, 21
Copying from the paper bypass, 25
Copy order in combine, 89
Copy output locations, 10
Copy Quality, 85
Custom magnification Settings 1–3, 86
Custom size originals, 17
110
D
Date Stamp
format, 93
Date stamp, 56, 93, 102
font, 93
position, 93
size, 94
stamp setting, 94
superimpose, 94
Delete format, 89
Deleting
program, 65
Directional magnification (%), 38, 101
Directional size magnification, 101
Directional size magnification (mm), 39
Display panel, 3, 5
Document server, 62
Double copies, 43, 101
Double copies separation line, 88
Drawing, 27
E
Edit, 87
Energy Saver key, 3
Enlarge 1–4, 86
Erase border, 47, 102
Erase border width, 88
Erase inside, 48, 102
Erase original shadow in combine, 88
Erase outside, 49
Exiting User Tools, 83
F
Fine magnification, 40, 101
Format overlay, 45, 102
Function keys, 4
Function Status indicator, 4
G
General Features, 84
Generation, 27
DolphinC2_GBcopy_F_FM.book Page 111 Friday, February 4, 2005 3:32 PM
I
P
If you cannot make clear copies, 71
If you cannot make copies as you want, 74
If your machine
does not operate as you want, 67
Image density, 86
Image repeat, 42, 101
Image repeat separation line, 88
Indicators, 3
Input/Output, 96
rotate sort − auto paper continue, 96
Interrupt copy, 24
Interrupt key, 3
J
Job end call, 86
Job List key, 3
Job preset, 23, 98
L
Long length original/paper, 2
M
Magnification ratio chart, 108
Main power indicator, 3
Manual image density, 28
Manual paper select, 30
Margin adjustment, 50, 102
Margin adjustment priority, 89
Max. Copy Quantity, 86
Measure chart, 109
Menu protect, 96
Mirror image, 45
Missing image area, 14
N
Names of major options, 2
Number keys, 4
O
On indicator, 3
Operation switch, 4
Original
combine, 42
Original counter/reset, 22
Original orientation, 16
Original output locations, 8
Originals, 12
Original tray, 10
Original type priority, 84
Page Numbering
stamp format, 94
Page numbering, 57, 94, 102
font, 94
page numbering in combine, 95
size, 95
stamp position, 95
superimpose, 95
Partial copy, 44
Partial copy priority, 89
Patched Original, 27
Photo, 27
Placing custom size originals, 17
Placing originals, 15
Positive/negative, 43
Preset cut, 31
Preset reduce/enlarge, 35, 99
Preset Stamp
stamp position, 90
stamp priority, 90
Preset stamp, 51, 90, 102
stamp format, 91
stamp language, 90
Priority setting: reduce / enlarge, 87
Program / Delete format, 89
Program/Delete overlay format, 46
Program/Delete user stamp, 54
Program format, 89
Program key, 3
Programs, 64
R
Rear original exit (document roller), 9
Rear original exit (straight), 9
Recalling a program, 65
Reduce 1–4, 87
Reproduction Ratio, 86
Rotate copy, 30
Rotate sort, 33, 99
S
Sample copy, 33
Sample Copy key, 4
Scan size limitations, by function, 104
Selecting copy paper, 29, 98
Selecting original type setting, 27
Separation line in combine, 88
Setting Originals and Date Stamp
Position/Orientation, 56
Settings record sheet, 105
Settings you can change with user tools, 84
111
DolphinC2copyGB_Index Page 112 Tuesday, September 27, 2005 1:35 PM
Setting the carrier sheet, 18
Setting the length of copy paper cut, 30
Sharp (#) key, 4
Size magnification, 37, 101
Sizes and weights of recommended originals, 12
Sort, 33, 99
Specifications, 97
Stamp, 90
Start key, 4
Storing
data, 62
program, 64
Superimpose, 94, 95
Supplementary information, 98
Synchro cut, 31
T
Text, 27
Text/Photo, 27
Top original exit, 9
Troubleshooting, 67
screen, 70
U
User Auto R/E, 87
User auto reduce/enlarge, 34
User Stamp
program / delete user stamp, 92
User stamp, 53, 92, 102
format, 93
position, 92
User Tools
(Copier / Document Server Features), 77
User Tools/Counter key, 3
V
Variable cut, 32
W
What you can do with this machine, iii
When a message appears, 67
Wide scan, 17
Z
Zoom, 36, 101
112
GB
GB
B188-6700A
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=120 // Print scale=81%
Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.000000 mm
Introduction
This manual contains detailed instructions and notes on the operation and use of this machine. For your
safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
place for quick reference.
Declaration of Conformity
Important
Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine.
“The Product complies with the requirements of the EMC Directive 89/336/EEC and its amending directives and the Low Voltage Directive 73/23/EEC and its amending directives.”
In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
a means POWER ON.
c means STAND BY.
Notes:
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Operator Safety
This machine contains LED Array in scanner and writing units.
In accordance with IEC 60417, this machine uses the following symbols for the anti- humidity heater
switch:
a means POWER ON.
b means POWER OFF.
Trademark
Acrobat® is a registered trademark of Adobe Systems Incorporated.
The machine is considered a class 1 LED device, safe for both office and EDP use.
Notes:
Two kinds of size notation are employed in this manual. With this machine refer to the metric version.
For good copy quality, Ricoh recommends that you use genuine Ricoh toner.
Ricoh shall not be responsible for any damage or expense that might result from the use of parts other
than genuine Ricoh parts with your Ricoh office products.
Important
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its
completeness or accuracy. If you have any questions concerning the legality of copying or printing certain items, consult with your legal advisor.
Power Source
220 - 240V, 50Hz/60Hz, 10A or more
Please be sure to connect the power cord to a power source as above. For details about power source,
see “Power Connection” in General Settings Guide.
Copyright © 2005 Ricoh Co., Ltd.
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=120 // Print scale=81%
Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.000000 mm
Spain
RICOH ESPAÑA S.A.
Avda. Litoral Mar, 12-14,
Blue Building, Marina Village,
08005 Barcelona
Phone: +34-(0)93-295-7600
The Netherlands
RICOH EUROPE B.V.
Prof.W.H. Keesomlaan 1,
NL-1183 DJ Amstelveen
P.O. Box 114, NL-1180 AC Amstelveen
Phone: +31-(0)20-5474111
Italy
RICOH ITALIA SpA
Via della Metallurgia 12,
37139 Verona
Phone: +39-045-8181500
United Kingdom
RICOH UK LTD.
Ricoh House,
1 Plane Tree Crescent, Feltham,
Middlesex, TW13 7HG
Phone: +44-(0)20-8261-4000
China
RICOH CHINA CO.,LTD.
17/F., Huamin Empire Plaza, No.728
Yan An West Road,
Shanghai P.C.:200050
Phone: +86-21-5238-0222
Germany
RICOH DEUTSCHLAND GmbH
Wilhelm-Fay-Strasse 51,
D-65936 Frankfurt am Main
Phone: +49-(0)69-7104250
Singapore
RICOH ASIA PACIFIC PTE.LTD.
260 Orchard Road,
#15-01/02 The Heeren,
Singapore 238855
Phone: +65-6830-5888
480W Operating Instructions Copy Reference
480W Operating Instructions Copy Reference
Overseas Affiliates
USA
RICOH CORPORATION
5 Dedrick Place
West Caldwell, New Jersey 07006
Phone: +1-973-882-2000
480W
Operating Instructions
Copy Reference
Basics
Copying
Troubleshooting
User Tools (Copier / Document Server Features)
Specifications
France
RICOH FRANCE S.A.
383, Avenue du Général de Gaulle
BP 307-92143 Clamart Cedex
Phone: +33-(0)-821-01-74-26
Printed in the Netherlands
GB
GB
B188-6700A
B1886700A
Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety
Information in the "General Settings Guide" before using the machine.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising