VPI product program for BHH/BHHF actuators

VPI product program for BHH/BHHF actuators
Data sheet
TCB-01
Sheet No.: TCB-01.01 RevA
Date: October 2010
VPI product program for BHH/BHHF actuators
TC-Block
Hydraulic symbol:
Pilot valve side/CETOP-3 connection
General Description:
Temperature Compensating Block for indication of end positions (VPI-V or VPI-E). The
TC-Block allows the expansion/contraction of the oil in the system caused by major
temperature and pressure variations without influencing the end stops and the switch
functions of the indicator. The Block is provided with Cetop-3 connection for mounting of
pilot valve.
The combination of the VPI indicator and the TC-Block can be used for all DKMS-actuators
and is used at on/off controls.
Note: The TC-Block is always to be used together with a 4/2-way control valve.
Functional description:
The function of the TC-Block is to allow the oil only to flow through the VPI in the
required direction (locks and acknowledges the el. on/off signal).
The undesired contra-flow is bypassing the VPI, thus avoiding an el. signal failure with
resulting “alarm signal”.
This undesired oil flow is caused by the temperature expansion/contraction of the oil
and also by a fluctuating pressure in the system at an on/off-operated actuator.
Main data:
Indicator side/VPI connection
Max. working pressure
Max. test pressure
Max. flow rate at 105 bar/1958 lbf/in2 (through any line)
Weight
Hydraulic media
Viscosity
Filtration requirements
Temperature range
Connection face
135 bar (1958 PSi)
205 bar (2973 PSi)
15 l/min.
1.2 kg. (2.65 lb)
Acid-free hydraulic oil
15-200 cSt
25 μm absolute or finer
-20° C to 80° C (-4° F to 176° F)
CETOP R 35H size 3, DIN
24340/VPI connection
Materials:
Housing
Sign plate
Screws
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
MS 58 (Brass)
AIS I 304 (Stainless)
AIS I 304 (Stainless)
Data sheet
TCB-01
Sheet No.: TCB-01.02 RevA
Date: October 2010
Main dimensions:
(Inches in parenthesis)
(1.93)
(2.38)
(1.77)
Application: Hydraulic diagram
Bettis System diagram:
Note: Not Certified dimensional drawings. Such drawings are available on request. Contact factory with correct model designation and serial number.
Important: Due to Emerson’s continuing commitment to engineered product advancement, data presented herin is subject to change.
The contents of the publication are presented for information purposes only, and while effort has been made to ensure their accuracy,
they are not to be construed as warranties or guarantees, expresses or implied, regarding the products or services described herein or their use or applicability.
All sales are governed by our terms and conditions, which are available on request.
We reserve the right to modify or improve the designs or specifications of our products at any time without notice.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement