Motorola | i325is | User`s guide | Motorola i325is User`s guide

Motorola i325is User`s guide
Nextel
iDEN
Digital Multi-service Data-capable Phone
i325 Phone User’s Guide
@NNTN5838A@
NNTN5838A
Contents
Getting Started........................................... 1
Removing the Battery Door ...............................2
Locating Your SIM Card ....................................3
Battery ...............................................................3
Antenna .............................................................6
Maintaining Durability ........................................6
Powering On and Off.........................................6
Activating Service..............................................7
Enabling Security ..............................................7
Phone Programming .........................................7
Finding Your Phone Number and Direct
Connect® Number ........................................8
Nextel® Voice Mail ............................................9
Nextel Worldwide® Service ...............................9
Customizing Features .......................................9
Phone Basics ....................................................9
SIM Card Security ...........................................13
Locking the Keypad.........................................16
Accessories .....................................................17
Wireless Local Number Portability: Bringing
Your Phone Number From Another
Carrier.........................................................17
Nextel® Customer Care...................................18
Making Calls .............................................20
Phone Calls .....................................................20
Direct Connect® Calls .....................................20
Receiving Calls ...............................................21
Call Icons ........................................................21
Ways to Enter Calls.........................................21
Using Speakerphone.......................................24
Using Mute ......................................................24
Making Emergency Phone Calls .....................24
Call Alerts..................................................26
Sending Call Alerts..........................................26
Receiving Call Alerts .......................................26
Using the Call Alert Queue..............................26
Direct TalkSM .............................................28
Off-Network Walkie-Talkie ..............................28
Channels and Codes.......................................29
Private Direct TalkSM Calls..............................31
i
Making Emergency Calls in Direct TalkSM
Mode...........................................................32
Setup Options..................................................32
Memo .........................................................46
Call Forwarding ........................................47
Storing Recent Calls to Contacts ....................34
Deleting Recent Calls......................................35
Forwarding All Calls ........................................47
Turning Off Call Forwarding ............................48
Forwarding Missed Calls .................................48
Viewing Call Forwarding Settings ...................49
Entering Text............................................ 36
Advanced Calling Features .....................50
Recent Calls ............................................. 34
Using Alpha Mode ...........................................36
Using Word Mode............................................36
Special Function Keys.....................................37
Using Numeric Mode.......................................38
Using Symbols Mode ......................................38
Contacts ................................................... 39
Viewing Contacts.............................................40
Creating Entries...............................................41
Storing Numbers Faster ..................................43
Editing Entries .................................................43
Deleting Entries ...............................................43
Checking Capacity ..........................................44
Creating Pauses and Waits.............................44
International Numbers .....................................45
ii
Call Waiting .....................................................50
Call Hold..........................................................51
Making a 3-Way Call .......................................51
Creating Pauses and Waits While Dialing.......52
Making International Calls ...............................52
Setting One Touch Direct Connect® ...............52
Group ConnectTM Calls, Talkgroups, and
Scangroups.................................................53
Emergency Group ConnectSM Calls................56
Call Timers ......................................................57
Using Your Phone as a Modem ......................58
Making TTY Calls ............................................59
Special Dialing Codes .....................................60
Nextel® Phone Services .......................... 61
Caller ID ..........................................................61
Per-Call Blocking.............................................61
Per-Line Blocking ............................................61
Alternate Line Service .....................................61
Call Restrictions ..............................................62
Nextel® 411 .....................................................62
Ring Tones ............................................... 63
Setting Your Phone to Vibrate.........................63
Ring and Vibrate..............................................64
Assigning Ring Tones to Contacts ..................64
Viewing Ring Tone Assignments.....................64
Downloading More Ring Tones .......................65
Managing Memory...........................................65
Deleting Custom Ring Tones ..........................65
Message Center ....................................... 66
Accessing the Message Center.......................66
Message Center Options.................................66
Receiving Messages................................ 67
Message Notifications .....................................67
Message Center ..............................................68
Voice Mail Messages................................69
Receiving a Message ......................................69
Accessing Voice Mail from
the Message Center ...................................69
Sending Unanswered Calls to Voice Mail .......69
Nextel® Voice Mail ....................................70
Setting Up Your Voice Mail Box ......................70
Playing Messages ...........................................70
Changing Your Password ...............................71
Recording Your Name.....................................71
Recording Your Active Greeting......................72
Advanced Voice Mail Features .......................72
Nextel® Voice Mail Tree ..................................77
SMS and Two-Way Messages .................78
SMS Messages ...............................................78
Two-Way Messages and Net Alerts ................79
Nextel Online® Services...........................82
NOL Services ..................................................82
Accessing NOL Services From Your Phone ...82
iii
Voice Records.......................................... 84
Creating Voice Records ..................................84
Playing Voice Records ....................................84
Labeling Voice Records ..................................85
Deleting Voice Records...................................85
Locking Voice Records....................................85
Managing Memory...........................................85
Java Applications .................................... 87
Installing Applications......................................87
Running Applications.......................................87
Suspending Applications .................................88
Resuming Applications....................................88
Ending Applications.........................................88
Downloading Applications ...............................89
Deleting Applications.......................................89
Managing Memory...........................................89
Shortcuts on the Main Menu ...........................89
Java Applications and GPS Enabled...............90
GPS Enabled ............................................ 93
IMPORTANT: Things to Keep in Mind ............93
Making an Emergency Call .............................94
iv
Viewing Your Approximate Location ...............95
Enhancing GPS Performance .........................96
Updating Satellite Almanac Data ....................98
Setting Privacy Options ...................................98
Using GPS with Map Software ........................99
Customizing Your Phone.......................102
Setting the Volume ........................................102
Setting Your Phone to Not Ring ....................102
Seeing the Display Better..............................103
Using Settings ...............................................103
Profiles ....................................................107
Viewing Profiles.............................................107
Switching Profiles ..........................................107
Surveillance Profile .......................................108
How Changing Settings Affects Profiles........108
Temporary Profiles ........................................108
Creating Profiles............................................109
Editing Profiles ..............................................110
Deleting Profiles ............................................110
Setting Call Filtering ......................................110
Shortcuts ................................................ 112
Creating a Shortcut .......................................112
Using a Shortcut............................................112
Editing a Shortcut ..........................................113
Deleting Shortcuts .........................................113
Using a Headset..................................... 114
Operational Warnings ...................................145
Operational Cautions ....................................146
Intrinsically Safe Radio Information...............147
Accessory Safety Information .......................150
MOTOROLA LIMITED WARRANTY .......152
Attaching a Headset ......................................114
Using a Remote PTTTM Button .....................114
Limited Warranty
Motorola Communication Products
(International)......................................156
Nextel® Customer Care ......................... 115
Patent and Trademark Information .......160
Domestic Customer Care ..............................115
Nextel Worldwide® Customer Care ...............116
Index ........................................................161
Understanding Status Messages ......... 117
Nextel® Terms and
Conditions of Service ........................ 119
Safety and General Information ........... 141
RF Operational Characteristics .....................141
Portable Radio Product Operation and EME
Exposure...................................................141
Electro Magnetic Interference/Compatibility..144
Medical Devices ............................................144
v
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: i325
Model Number: H68XAH6RR1AN
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a),
15.107(d) and section 15.109(a)
Class B Digital Device
As a personal computer peripheral, this device
complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
vi
Note: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Getting Started
fixed
antenna
volume
controls
audio
jack
p
Power button.
Navigation key — press the arrows to
scroll through menus and lists.
TALKTM
PUSH TO
(PTTTM) button
power
button
m
A
option keys
space key
microphone
back key
EMERGENCY
GROUP CONNECTSM call
DIRECT CONNECT® / GROUP
CONNECTTM speaker on/off
Option key — selects the option
appearing above it on the display.
Note: Throughout this User Guide, the
option keys will be represented
by A.
send key
speaker
(in back)
Menu key — accesses context-sensitive
menus.
s
Send key — places phone calls.
e
End key — ends phone calls; returns to
idle screen; in browser mode, returns to
Net main menu.
accessory connector
1
Getting Started
To start using your i325 phone:
•
•
•
•
Note: If the release button does not slide
forward to release the battery door, rotate
the circular piece in the center of the
release button to unlock it.
Make sure your SIM card is in place.
Charge the battery.
Activate your service.
Enable security.
Removing the Battery Door
1 Make sure the phone is powered off. See
“Powering On and Off” on page 6.
2 Slide the release button forward until it releases
the battery door.
release
button
speaker
2
3 Remove the battery door from the back of your
phone.
Locating Your SIM Card
Locating Your SIM Card
Battery
Your SIM (Subscriber Identity Module) card is a
small piece of plastic located in the SIM card
holder in the back of your phone, underneath the
battery.
Inserting the Battery
SIM card
holder
Your phone comes with a High Capacity Lithium
Ion battery.
1 Remove the battery door.
2 Insert the top of the battery into the battery area.
Press the bottom of the battery to secure it.
SIM card
If there is no SIM card in your phone, contact
Nextel Customer Care at 1-800-639-6111.
3 Replace the battery door and press it gently until
you hear a click.
3
Getting Started
4 If you want to ensure the battery door does not
accidentally come off, rotate the circular piece in
the center of the release button to lock it.
3 Plug the other end of the charger into the
accessory connector.
Charging the Battery
Your phone comes with a rapid travel charger.
Charger Attached appears on the display.
1 Plug the charger into an electrical outlet.
2 Open the connector cover.
Tip: To remove the charger from the accessory
connector: Press the buttons on the sides
of the plug. Pull the plug straight out.
connector cover
4
4 If you have purchased optional batteries or
chargers, see “Charging Times” on page 5.
Note: While the phone is charging, the keypad
backlight will not illuminate.
Battery
Charging Times
Removing the Battery
Check your battery and charger type against the
below grid to determine appropriate charging
times.
1 With the phone powered off, remove the battery
door.
2 Remove the battery by pushing the battery
toward the antenna and lifting it out.
Recommended charging times:
Battery
Charger
Rapid
Standard
Standard
Lithium Ion
2 hours
4 hours
Extended
Capacity
Lithium Ion
2.5 hours
6 hours
High
Capacity
Lithium Ion
3.5 hours
7.5 hours
For best results, charge the batteries within the
temperature range of 50°F to 104°F (10°C to
40°C).
Prolonged charging is not recommended.
Battery Use and Maintenance
• The Motorola iDEN Approved Lithium Ion
chargers provide optimum performance. Other
chargers may not fully charge the iDEN Lithium
Ion battery or may yield a reduced number of
lifetime charge cycles.
• Extreme temperatures degrade battery
performance. Do not store the battery where
temperatures exceed 140°F (60°C) or fall below
4°F (-20°C).
• Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge
per day.
5
Getting Started
• The battery capacity is degraded if the battery is
stored for long periods while fully charged. If
long term storage is required, store at half
capacity.
Antenna
Attach the phone antenna before using your
phone. The antenna must be screwed in
completely for proper operation and water
resistance.
Attaching the Antenna
1 Place the antenna into the antenna socket.
Removing the Antenna
1 Grip the antenna firmly and turn it
counter-clockwise until it is loose.
2 Remove the antenna from the antenna socket.
Maintaining Durability
To maintain the water resistant nature of your
phone:
• Attach the phone antenna before using your
phone.
• Always reinsert the audio jack cover and bottom
connector cover.
Powering On and Off
antenna
To power your phone on:
socket
As your phone connects to the network, you will
see a connecting message. When the idle screen
appears, the phone is ready to use.
Press p.
2 Press and turn the antenna clockwise until it will
no longer turn.
6
Activating Service
Press A under Ok.
b
Note: If you press A under Later, the idle
screen will appear. The next time you
select Net from the main menu, you will
be prompted to enable security before you
can use Nextel Online services.
3 You are prompted to enable security. Press A
under Yes. A series of screens and then the
default homepage displays.
4 Press e to return to the idle screen.
To power your phone off:
Press and hold p.
Activating Service
The first time you power on your phone, your
service is activated.
A screen then appears prompting you to select Ok
to update your browser information. This screen
will only appear during initial activation. See
“Enabling Security”.
Enabling Security
You must enable security the first time you power
on your phone or within 20 days of first activation of
your phone.
Phone Programming
Within 24 hours of enabling security, you will
receive a Net alert containing your Personal
Telephone Number (PTN), Nextel Customer Care
number, Direct Connect® number, and Group lists
for Group ConnectTM calls.
1 When you receive a Net alert saying New
Browser Message - Receive Programming
Info, press A under Goto.
2 You are prompted to accept changes to your
lists. Press A under Ok.
3 You are prompted again to accept changes to
your lists. Press A under Ok.
4 A confirmation screen displays. Press A under
Ok.
5 Press e to return to the idle screen.
7
Getting Started
Finding Your Phone Number
and Direct Connect® Number
My Info lets you view your phone number, Direct
Connect number, and other phone information:
Press m to access the main menu.
Scroll to My Info.
Press A under Select.
Scroll to see your information:
• Name — Enter your name. See “Entering
Text” on page 36.
• Line 1 and Line 2 — your phone numbers for
phone lines 1 and 2. These are filled in when
you receive your first Net alert after enabling
security on your phone.
• Direct Connect — Your Direct Connect
number is the number that others use to
contact you using Direct Connect® service.It is
filled in when you receive your first Net alert
after enabling security on your phone. To view
your Direct Connect number, scroll to Direct
Connect and press A under View.
• Group ID — the number of the Scangroup
you have joined.
1
2
3
4
8
• Carrier IP — the IP address assigned to
Nextel. It is filled in when you register for
packet data services. To view your Carrier IP
address, scroll to Carrier IP and press A
under View.
• IP1 Address and IP2 Address — the IP
addresses assigned to you for using the
Internet with your phone. To view your IP
addresses, scroll to the IP address you want
to view and press A under View.
• Ckt — Your circuit data number is the number
you use if you want to use your phone to
transfer circuit data. See “Advanced Calling
Features” on page 50. You receive this
number from Nextel.
Note: If you request equipment related
transactions on your account, Nextel
Customer Care may require you to
provide specific information about your
phone. By pressing m anytime while in My
Info, a context-sensitive menu will appear
that includes your phone's service status,
unit information, and phone identification
numbers including IMEI, SIM ID, and
Serial Number (SN). Please be prepared
to supply the representative with this
information when requesting these types
of transactions.
Nextel® Voice Mail
Nextel® Voice Mail
Phone Basics
You must set up your voice mail box before you
can retrieve messages. See “Setting Up Your
Voice Mail Box” on page 70.
Any time your phone is powered on, the display
provides you with information and options.
status icons
Nextel Worldwide Service
®
b
You can use your phone to make calls
internationally in select cities using other iDEN ®
networks by calling Nextel Customer Care to
activate international dialing on your account.
Countries in which you can use your phone include
Argentina, Brazil, Canada, Philippines, Singapore,
Israel, Mexico and Peru*.
* Credit approval may be required. Other conditions may apply.
Customizing Features
You can control many features of your phone,
including the volume of incoming sound, rings, and
other tones. See “Customizing Your Phone” on
page 102.
text area
menu icon
display options
The screen shown above is the idle screen. The
idle screen appears when your phone is on, but not
engaged in any activity.
Text Area
This area displays menus, messages, names,
phone numbers, and other information.
Display Options
Two display options appear at the bottom of most
screens. You select a display option by pressing
the option key below it.
9
Getting Started
Menus and Lists
Main Menu
Your phone’s features are arranged in menus,
submenus, and lists.
All your phone’s features can be accessed through
the main menu. When you are using a feature, the
icon for that feature appears in the upper left
corner of the display.
To access the items in a menu or list, scroll using
the navigation key at the top of your keypad. This
key lets you scroll up, down, left, or right. Holding
down the appropriate part of the navigation key
speeds up scrolling.
In this guide, this symbol > tells you to select a
menu or list item. For example, Settings >
Security means:
1 Scroll to Settings on the main menu.
2 Press A under Select to see the Settings
screen.
3 Scroll to Security and press A under Select to
see the Security screen.
Menu Key
Many features provide context-sensitive menus
that let you access related features and actions.
The S icon appears any time a context-sensitive
menu is available. Press m to access the menu.
10
a Net
Access to Nextel Online
services. See page 82.
j Java Apps
Java applications on your
phone. See page 87.
s
Customize your phone.
See page 102.
Settings
m Ring Tones
Assign ring tones and turn
ringer off. See page 63.
v VoiceRecord
Record and play audio
messages. See page 84.
j My Info
View personal phone
information, including
phone number and Direct
Connect number. See
page 8.
Phone Basics
n Downloads
Provides a catalog of ring
tones and Java
applications that you can
download directly to your
phone. Items in this
catalog change frequently,
so check regularly for
fresh content. See
page 65.
g GPS
Find your approximate
geographical location.
See page 93.
C Contacts
Create, view, store, edit
contacts. See page 39.
e Messages
Access messages. See
page 66.
f Call Forward
Set call forwarding
options. See page 47.
g Memo
Store a number to access
later. See page 46.
h Call Timers
Phone usage information.
See page 57.
i Recent Calls
Lists recent calls. See
page 34.
c Shortcuts
Create shortcuts to
screens. See page 112.
P Profiles
Groups of settings you
apply together. See
page 107.
k Call Alert
Lists call alerts. See
page 26.
V Voice Recog
Used with voice-activated
dialing and shortcuts. See
page 23 and page 112.
m DirecTalk
Launch Direct TalkSM.
Access Setup and Help.
See page 28.
11
Getting Started
Status Icons
m
Status icons appear in the two rows at the top of
the display. Some appear at all times. Others
appear only when your phone is engaged in certain
activities or when you have activated certain
features.
Direct Talk — Your phone is off
network and set to Direct Talk
mode.
S
Scan — Your phone is set to
receive Group Connect calls from
all the Talkgroups in a Scangroup.
e
Emergency Group Connect Call
— Your phone is active on an
Emergency Group Connect call.
o p q r Signal Strength — More bars
s
next to the antenna indicate a
stronger signal.
GHI
J KL
Call Forward — Your phone is set
to forward calls. See “Call
Forwarding” on page 47.
A
Phone In Use — Your phone is
active on a phone call.
vMR
Ringer Off — Your phone is set
not to ring.
B
Direct Connect In Use — Your
phone is active on a Direct
Connect call.
u
H
Scangroup In Use — Your phone
is active on a Group Connect call.
Speaker Off — Sets Direct
Connect and Group Connect
sound to come through the
earpiece rather than through the
speaker.
12
Active Phone Line — 1 indicates
phone line 1 is ready to make
calls; 2 indicates phone line 2 is
ready to make calls.
wy
Messages — You have one or
more messages. See “Receiving
Messages” on page 67.
ljik
mn
T9 Text Input — You are using T9
Text Input to enter text. See
“Entering Text” on page 36.
a b c d Battery Strength — More bars on
e f g d the battery indicate a greater
charge.
12
SIM Card Security
DEF
Internet — You are ready to
browse the internet or are
browsing the internet using a
secure connection.
YZ
Packet Data — You are ready to
transfer packet data or are
transferring packet data. See
“Using Your Phone as a Modem”
on page 58.
NO
TTY — You are ready to use your
phone to make calls using a
teletypewriter device. See “Making
TTY Calls” on page 59.
SIM Card Security
Your SIM card stores all your Contacts and
protects your personal information. Since this
information is stored on your SIM card, not in your
phone, you can remove the information by
removing your SIM card.
Note: Except for making emergency phone
calls, your phone will not function without
the SIM card.
To prevent unauthorized use of your phone, your
SIM card is protected by a PIN that you enter each
time the phone is powered on. You can change the
PIN or turn off the requirement that it be entered.
Turning the PIN Requirement On and
Off
When the SIM PIN requirement is off, your phone
can be used without entering a PIN.
Important: When the SIM PIN requirement is off,
the personal data on your SIM card is
not protected. Anyone can use your
phone and access your personal data.
When the SIM PIN requirement is on, you are
prompted to enter your PIN each time you power
on your phone.
Note: If a SIM PIN is required, your phone will
not function until the SIM PIN is entered,
except for making emergency phone calls.
1 From the main menu, select Settings >
Security > SIM PIN.
2 Scroll to On or Off.
3 Press A under Select.
4 Enter the current SIM PIN.
Note: The default SIM PIN is 0000. Change your
PIN to prevent fraudulent use of the SIM
card (see “Changing the PIN” on page
14).
5 Press A under Ok.
13
Getting Started
Entering the PIN
Unblocking the PIN
1 When the Enter SIM PIN Code screen appears
after you power on your phone, enter your SIM
PIN.
2 Press A under Ok.
If you enter your PIN incorrectly 3 times, your SIM
card is blocked. To unblock your SIM card, you
must contact Nextel Customer Care to get a PIN
Unblock Code (PUK).
The message SIM Unlocked displays.
Important: If you enter your PIN incorrectly 3 times,
your SIM card is blocked. To unblock
your SIM card, you must contact Nextel
Customer Care.
Changing the PIN
Note: The SIM PIN requirement must be turned
on in order to access this feature.
1 From the main menu, select Settings >
Security > Change Password > SIM PIN.
2 At the Enter Old SIM PIN Code screen, enter
the current SIM PIN.
3 Press A under Ok.
4 At the Enter New SIM PIN Code screen, enter
the new 4 to 8-digit SIM PIN.
5 Press A under Ok.
6 At the Re-enter New SIM PIN Code screen,
re-enter the new SIM PIN to confirm.
7 Press A under Ok.
Important: If you unsuccessfully enter the PUK
code 10 times, your SIM card is
permanently blocked and must be
replaced. If this happens, all data is
lost. You will get a message to contact
Nextel Customer Care. Except for
making emergency phone calls, your
phone will not function with a blocked
SIM card.
To unblock the PIN:
1 Press * # m 1.
2 At your Nextel Customer Care representative’s
request, provide the information needed to give
you a PUK code.
3 Select Unblock PIN.
4 Enter the PUK code.
5 Enter a new 4 to 8-digit SIM PIN.
6 Re-enter your SIM PIN.
Note: These steps must be performed in quick
succession.
If you entered the codes properly, SIM Unlocked
appears on the display.
14
SIM Card Security
Inserting and Removing Your SIM
Card
Important: Do not touch the gold-colored areas of
your SIM card.
The SIM card is designed for optimal Contacts
storage and feature use. For Nextel SIM card
compatibility information, visit
www.nextel.com/sim.
If you remove your SIM card and use it with
another phone, or use another SIM card with your
phone, the following information is erased:
•
•
•
•
•
•
•
The recent calls list
Call forwarding settings
Net alerts
Information stored in Memo
3 most recent GPS Enabled locations
Voice records
Voice names
Note: In some cases, Contacts may not be
accessible if you move your SIM card to
another phone. Contacts entries created
with your i325 phone are not readable by
an older iDEN SIM-based phone.
Inserting Your SIM Card
1 With your phone powered off, remove the
battery door and battery.
2 Hold your SIM card as shown.
cut corner
3 Carefully slide your SIM card into your phone,
until it lies flat in the SIM card holder.
SIM card
holder
15
Getting Started
Removing Your SIM Card
Important: To avoid loss or damage, do not
remove your SIM card from your phone
unless absolutely necessary.
1 With your phone powered off, remove the
battery door and battery.
2 While holding the tab down, slide your SIM card
out of the SIM card holder.
SIM card
holder
tab
Note: Protect your SIM card as you would any
delicate object. Store it carefully.
Locking the Keypad
Locking the phone’s keypad prevents its buttons
from being pressed. When the keypad is locked,
you can only:
• Power the phone on and off
• Unlock the keypad
• Raise and lower the volume
16
• Respond to incoming calls, messages, and
alerts
• Use the PTT button to initiate a call using One
Touch Direct Connect®. (One Touch DC must
be set to Last Call or Assigned Number. See
“Setting One Touch Direct Connect®” on page
52)
Important: Emergency phone calls cannot be
placed while the keypad is locked.
To lock the keypad:
1 From the idle screen, press m.
2 Press *.
If you press a key while the keypad is locked,
instructions for unlocking the keypad display
briefly.
To unlock the keypad:
1 From the idle screen, press m.
2 Press *.
While the keypad is locked, you can respond to
incoming calls, messages, and alerts just as you
do when the keypad is not locked. When finished,
press e to return to the idle screen. The keypad
remains locked.
Accessories
You also have the option of setting your phone to
automatically lock the keypad if there has been no
activity for a specified time.
1 From the main menu, select Settings >
Security > Keypad Lock.
2 To lock the keypad immediately, select Lock
Now. You will be given the option to press m and
* to lock and unlock the keypad.
3 To set a specific time for the keypad to lock if
there has been no activity, scroll to Auto Lock
and press A under Change.
The keypad can be set to lock in 5, 10, 15 or 20
minutes if the keypad is not touched during the
specified time. To turn the auto lock off, repeat step
3 and select Off.
Accessories
Your phone comes with a High Capacity Lithium
Ion Battery, a rapid travel charger, and a holster.
Various accessories are available for use with your
i325 phone, including holsters, carry cases, vehicle
power charger, batteries, Hands-Free accessories
and more.
To order additional accessories, go to
www.nextel.com or call 1-800-Nextel6. You can
also contact your Nextel Authorized Sales
Representative or stop by any Nextel-owned Retail
Store. For information on Nextel retail store
locations, go to www.nextel.com.
Wireless Local Number
Portability: Bringing Your
Phone Number From Another
Carrier
If you are bringing your phone number from
another carrier, your new phone will be active as
soon as you receive it. Nextel will provide you with
a temporary phone number so that you can begin
using your phone immediately. Once the number
you have brought to Nextel is activated, your
temporary phone number will be deactivated and
service with your previous carrier will be cancelled
automatically. You will receive a text message on
your Nextel phone letting you know that activation
is complete. Simply turn your phone off and back
on again to complete activation.
Here is additional information you need to be
aware of until the number you have brought to
Nextel is active on the Nextel network:
17
Getting Started
Nextel® Voice Mail
Nextel® Customer Care
We suggest you set up your voice mail box after
the number you brought to Nextel is active on your
Nextel phone and your temporary phone number is
deactivated. If you set up your voice mail box prior
to this, all messages and all settings (including
your greeting and password) will be lost when the
number you have brought to Nextel becomes
active.
Nextel Customer Care: 1-800-639-6111 or dial 611
from your i325 phone.
Text Messaging
During the activation process, it is possible that text
messages may not be properly routed to your
Nextel phone.
911 Calls
Nextel continues to make efforts to ensure that all
911 calls are minimally impacted by this process. If
you make a call to 911 from your temporary phone
number and the call fails, the 911 emergency
response center will not be able to call you back on
your Nextel phone if in the meantime your Nextel
phone has been programmed with your permanent
phone number. As with any wireless 911 call, if
your call is disconnected before location and
details have been provided, be sure to call 911
again and advise that you were disconnected.
Go to www.nextel.com/wlnp for more details.
18
Nextel Worldwide Customer Care:
+1-360-662-5202 (toll-free from your i325 phone).
i325 Phone Menu Tree
Net
Java Apps
Java Applications (if any)
About
Deinstall
License Info
Privacy Settings
Java System
Reset System
Delete All
Settings
Display/Info
Phone Calls
DC/GC Options
Personalize
Volume
Security
Advanced
Ring Tones
Vibrate All On/Off
Available Ring Tones
Vibrate
Silent
Assign w/vibe
Overview
Memory Usage
Delete
VoiceRecord
Contacts
[New Contact]
New
Search
Capacity
Filter
Call Setup
Contacts (if any)
View
New
Search
Edit
Delete Contact
Delete Number
Capacity
Filter
Call Setup
[New VoiceRec]
VoiceRecords (if any)
New
Lock
Add To
Memory
Delete
Delete All
Label
My Info
Name
Line 1
Line 2
Direct Connect
Group ID
Carrier IP
IP1 Address
IP2 Address
CKT
Service Status
Unit Info
IMEI/SIM ID/SN
Registr Log
Downloads
GPS
Position
Privacy
Interface
Messages
Voice Mail
SMS
Net Alert
Call Forward
All Calls
- To
Retrieve Status
Detailed
- If Busy
- If No Answer
- If Unreachable
Retrieve Status
Memo
Store to Cntcs
Cancel
Delete
Call Timers
Last Call
Phone Reset
Phone Lifetime
DC/GC Reset
DC/GC Lifetime
Circuit Reset
Circuit Lifetime
Kbytes Reset
Recent Calls
Recent Calls (if any)
Store
View
Delete
Delete All
Call Alert Queue
Call Setup
Shortcuts
[New Entry]
Shortcuts (if any)
New
Edit
Reorder
Delete
Delete All
Profiles
[New Profile]
Profiles (if any)
View
Edit
New
Delete
Delete All
Setup
Call Alert
Call Alerts (if any)
View
Store
Delete
Delete All
Sort By
Recent Calls
Voice Recog
Main Menu Setup
DirecTalk
Go To DirecTalk
Setup
Help
19
Making Calls
Your i325 phone makes two types of calls: digital
cellular phone calls and Direct Connect calls. With
Direct Connect calls, you use your phone as a
long-range, digital walkie-talkie.
See www.nextel.com for more details on these
Direct Connect services. Pricing for each of these
services is based on your service contract.
1 Enter the number you want to call.
2 Press s to place the call.
3 Press e to end the call.
1 Enter the Direct Connect number you want to
call.
2 Press and hold the PTT button on the side of
your phone. Begin talking after your phone emits
a chirping sound.
3 Release the PTT button to listen.
Tip: To let someone know you want to talk to
him or her on a Direct Connect call, send a
call alert. See “Call Alerts” on page 26.
Direct Connect® Calls
Dialing Direct Connect® Numbers
Phone Calls
Nextel offers the following Direct Connect services:
• Direct Connect — allows walkie-talkie calling
within your local coverage area.
• Nationwide Direct Connect — allows
walkie-talkie calling to Nextel users from
anywhere on the Nextel National Network (U.S.)
to anywhere on the National Network.
• International Direct Connect — allows
walkie-talkie calling to and from select countries.
• Group Connect — allows walkie-talkie calling to
up to 25 Nextel customers simultaneously (see
“Group ConnectTM Calls, Talkgroups, and
Scangroups” on page 53).
20
Every Direct Connect number has 3 parts — an
area ID, a network ID, and a member ID — with an
asterisk between each of these parts. For example:
999*999*9999.
When you place a Direct Connect call, you must
enter the whole Direct Connect number including
the asterisks.
Tip: When you store a Direct Connect number in
Contacts it is good practice to include the
whole Direct Connect number including the
asterisks in case you travel with your
phone, or another Direct Connect user
whom you are trying to reach travels with
their phone, outside of your network.
Receiving Calls
Receiving Calls
Phone Calls
When you receive a phone call, your phone rings,
vibrates, or lights up its backlight.
Answering
Press s. -orPress A under Yes. -orPress any number key.
To answer a call by pressing any number key, you
must have the Any Key Ans feature turned on (see
“Phone Calls Features” on page 103).
Sending to Voice Mail
2 Press and hold the PTT button on the side of
your phone. Begin talking after your phone emits
a chirping sound.
3 Release the PTT button to listen.
Call Icons
When you make a call, call icons appear in the text
area of the phone’s display.
X Placing a phone call.
W Receiving a phone call.
Y Phone call is active.
Z Phone call is on hold.
Press e. -or-
U Phone call ended.
Press A under No.
When you miss a call, this icon appears in the text
area:
Ending
Press e.
Direct Connect® Calls
When you receive a Direct Connect call, your
phone emits a chirping sound or vibrates.
Answering
1 Wait for the caller to finish speaking.
V You missed a phone call.
Ways to Enter Calls
To enter the number you want to call, you can:
• Use the numbers on the keypad
• Select the number from the recent calls list
21
Making Calls
•
•
•
•
•
Select the number from Contacts
Redial the last phone number called
Say a voice name into your phone
Use Speed Dial or Turbo Dial®
Use One Touch Direct Connect to make a Direct
Connect call
• Use a TTY device — see “Making TTY Calls” on
page 59
From the Keypad
To enter the number you want to call, press the
numbers on the keypad.
If you make a mistake:
• To clear a digit, press A under Delete.
• To clear all digits, press and hold A under
Delete.
• To insert or delete a digit anywhere in the string
of digits you have entered, scroll left or right.
• To cancel, press e.
From the Recent Calls List
The recent calls list stores the last 20 calls you
made or received, except Emergency Group
Connect calls.
22
To select a number from the recent calls list as the
number you want to call:
1 From the idle screen, scroll down. -orFrom the main menu, select Recent Calls.
2 Scroll to the name or number you want to call.
From Contacts
If you have numbers stored in Contacts, you can
use these numbers to make calls. For information
on entering numbers into Contacts, see “Creating
Entries” on page 41.
Calling from the Contacts List
1 From the main menu, select Contacts.
2 Scroll to the name or number you want to call.
Tip: To find Contacts entries faster, use the
keypad to enter the first letter of the name.
3 Place the call now. -orScroll left or right to display the Contacts type for
the number you want to call.
If you are making a Direct Connect call, your phone
places the call to the Direct Connect number stored
in the Contacts entry, even if the Direct Connect
icon is not displayed.
Ways to Enter Calls
If you are making a phone call:
Using a Voice Name
• Your phone places the call to the phone number
assigned to the Contacts type displayed.
• If the Contacts type displayed is not a phone
number, your phone places the call to the phone
number stored in the Contacts entry.
• If the Contacts type displayed is not a phone
number and you have more than one phone
number stored in the Contacts entry, your phone
prompts you to select the phone number you
want to place the call to.
If you have created a voice name in Contacts for
the number you want to call, you can say the voice
name into your phone to enter the number. See
page 40 for more information about voice names.
Calling from a Contacts Entry
Your phone plays the name back to you.
1 From the main menu, select Contacts.
2 Scroll to the name or number you want to call.
3 Press A under View. -or-
If you are making a phone call, the call is placed
automatically.
If View is not one of your options: Press m.
Select View.
4 Place the call now. -orScroll to view more numbers. When you place
the call, it is made to the number displayed.
Redialing the Last Number
Press and hold s to place a call to the last phone
number you called.
To use a voice name:
1 Press m.
2 Select Voice Recog.
3 Speaking into the microphone, say the voice
name assigned to the number you want to call.
Tip: To stop a phone call from being completed,
press e.
If you are making a Direct Connect call, press and
hold the PTT button to place the call.
Using Speed Dial and Turbo Dial®
Each phone number stored in Contacts is assigned
a Speed Dial number which you can use to enter
that number.
23
Making Calls
Speed Dial
Using Mute
1 From the idle screen, use the keypad to enter
the Speed Dial number assigned to the phone
number you want to call.
2 Press #.
3 Press s.
Muting calls lets you listen to incoming sound
without transmitting sound. Mute is available
whenever you are on an active call.
Turbo Dial
From the idle screen, press and hold the Speed
Dial number (1 through 9) assigned to the phone
number you want to call.
Using One Touch Direct Connect
®
One Touch Direct Connect sets your phone to call
the most recent Direct Connect number on the
recent calls list, or a Direct Connect number you
choose, every time you press the PTT button. See
“Setting One Touch Direct Connect®” on page 52.
Using Speakerphone
Turning on speakerphone makes incoming sound
come out of the phone’s speaker instead of the
earpiece. Speakerphone is available whenever you
are on an active phone call.
To turn speakerphone on or off:
Press under A under Spkr. -orPress t.
24
To turn mute on:
Press A under Mute.
While mute is on, Unmute appears as a display
option.
To turn mute off:
Press A under Unmute.
Making Emergency Phone
Calls
Your phone supports emergency calling.
Emergency phone calls can be made even when
your SIM card is blocked or not in your phone.
Dial 911 to be connected to an emergency
response center. If you are on an active call, you
must end it before calling 911.
Making Emergency Phone Calls
When you make an emergency call, your phone’s
GPS Enabled feature can help emergency service
personnel find you, if you are in a location where
your phone's GPS antenna has established a clear
view of the open sky and your local emergency
response center has the equipment to process
location information. See “GPS Enabled” on page
93, and particularly “IMPORTANT: Things to Keep
in Mind” on page 93 and “Making an Emergency
Call” on page 94, for more information on the
limitations of this feature. Because of the
limitations of this feature, always provide your best
knowledge of your location to the emergency
response center when you make an emergency
call.
Important: Emergency phone calls cannot be
placed while the keypad is locked.
Important: If you are bringing your phone number
to Nextel from your previous carrier,
you may receive a temporary telephone
number while your Nextel phone is
being programmed with your
permanent phone number. If you make
a call to 911 and the call fails, the 911
emergency response center will not be
able to call you back on your Nextel
phone if in the meantime, your Nextel
phone has been programmed with your
permanent telephone number. If the call
is disconnected before location and
details have been provided, call 911
again and advise that you were
disconnected.
Important: If you have not registered on the
network, emergency calls cannot be
placed while your SIM card is in your
phone.
25
Call Alerts
Receiving Call Alerts
Sending a call alert lets the recipient know you
want to talk to him or her on a Direct Connect call.
When you receive a call alert, you must answer,
queue, or clear it. You cannot receive phone calls
or Direct Connect calls until you do.
When you send a call alert, the recipient’s phone
emits a series of beeps, or vibrates, and displays
your name or Direct Connect number.
To answer a call alert, press the PTT button to
make a Direct Connect call to the sender.
The recipient can:
To queue a call alert, press A under Queue.
• Answer — begin a Direct Connect call with the
sender
• Queue — store the call alert to the call alert
queue, which is a list of call alerts
• Clear — dismiss and delete the call alert
Note: The recent calls list also stores call alerts
you have received. They appear as Direct
Connect calls. Call alerts remain in your
recent calls list until you delete them or
until they reach the end of the list.
To clear a call alert, press A under Clear.
Sending Call Alerts
Using the Call Alert Queue
1 Enter the Direct Connect number you want to
send to, as you would when making a Direct
Connect call.
2 Press A under Alert. Ready to Alert appears
on the display.
3 Press the PTT button until Alert Successful
appears on the display.
Note: If the alert is not successful, this may
mean the person you are trying to reach is
on a call or has the phone turned off.
When you queue a call alert, it remains in the call
alert queue until you make a Direct Connect call to
the sender or delete it.
26
Viewing Call Alerts
1 From the main menu, select Call Alert.
2 Scroll through the list.
Using the Call Alert Queue
Viewing Date and Time
Deleting Call Alerts
To view the date and time a call alert was received:
To delete a call alert from the queue:
1
2
3
4
1 From the call alert queue, scroll to the call alert
you want to delete.
2 Press m.
3 Select Delete.
4 Press A under Yes to confirm.
From the main menu, select Call Alert.
Scroll to the call alert you want information on.
Press m.
Select View.
Responding to Call Alerts in the
Queue
To delete all call alerts from the queue:
After you queue a call alert, you can respond to it
by making a Direct Connect call to the sender or
sending a call alert to the sender.
1 From the call alert queue, press m.
2 From the call alert menu, select Delete All.
3 Press A under Yes to confirm.
Making a Direct Connect Call to the Sender
Sorting Call Alerts
1 From the main menu, select Call Alert.
2 Scroll to the call alert you want to respond to.
3 Press the PTT button to begin the call.
This removes the call alert from the queue.
Sending a Call Alert to the Sender
1 From the main menu, select Call Alert.
2 Scroll to the call alert you want to respond to.
3 Press A under Alert. Ready to Alert appears
on the display.
4 Press the PTT button until Alert Successful
appears on the display.
Tip: You must have at least one call alert in the
queue to access this feature.
To sort call alerts by the order they were received:
1
2
3
4
5
From the main menu, select Call Alert.
Press m.
Select Sort By.
Scroll to First on Top or Last on Top.
Press A under Select.
27
Direct TalkSM
Off-Network Walkie-Talkie
Direct Talk allows direct two-way phone-to-phone
communications between two or more phones
equipped with Direct Talk. You can make and
receive Direct Talk calls even when network
service is not available. You can talk to anyone on
your code and channel within your range.
Note: Range will vary based on terrain,
man-made structures and atmospheric
conditions.
Direct Talk allows you to:
• Use code or private mode operation
• Use up to 10 channels
Note: Direct Talk is not compatible with older
Family Radio Services products.
The following features and main menu items will
not be available while in Direct Talk mode:
• On-network phone calls
• On-network Direct Connect calls or Group
Connect Calls
• NOL Services
• Data transmission
28
•
•
•
•
•
•
•
Incoming message notification
Musical ring tones
Call forwarding
Messages
Call Timers
Call alerts
Voice records
Using Direct TalkSM
To set your phone to Direct Talk:
1 From the main menu, scroll to DirecTalk and
press A under Select.
2 Select Go To DirecTalk.
Switching to DirecTalk Please Wait displays.
After a few seconds, the Direct Talk idle screen
appears. DT Ready appears on the first line of the
display. The code you are set to appears on the
second line of the display. The channel you are set
to appears on the third line of the display.
Note: When switching from the network to Direct
Talk, the last channel and code that were
set appear on the idle screen.
While in Direct Talk, this icon m appears on the
display, indicating there is no network signal and
Direct Talk is active.
Channels and Codes
Exiting Direct TalkSM
To set your phone to network mode when Direct
Talk is active:
1 From the Direct Talk idle screen, press m.
2 Scroll to DT Options and press A under
Select.
3 Select Exit DirecTalk.
Switching to Network Please Wait displays. After
a few seconds, the network idle screen appears.
Talk Range
Phones used in Direct Talk mode should be a
minimum of 6 feet apart to maximize performance
and improve transmission range.
Channels and Codes
Your phone has 10 channels and 15 codes.
Channels are divided into sets of frequencies that
allow you to make and receive Direct Talk calls.
Other parties may also be talking on the same
channel.
Codes help minimize interference from unwanted
messages and other disturbances when you are on
the same channel as others.
To have a conversation, all parties must be on the
same channel and code. For private Direct Talk
calls, the person you are calling must be in Direct
Talk and set to the same channel to which you are
set in order to receive your call.
Note: When making a code call, all parties that
are on your code and channel can hear
your conversation.
To set a channel:
1 From the Direct Talk idle screen, press A under
Edit.
2 Scroll to Channel.
3 Press A under Edit.
4 Select a channel.
5 When you are finished, press A under Back to
return to the idle screen.
To set a code:
1 From the Direct Talk idle screen, press A under
Edit.
2 Scroll to Code.
3 Press A under Edit.
4 Select a code.
5 When you are finished, press A under Back to
return to the idle screen.
29
Direct TalkSM
Making and Receiving Code Calls in
Direct TalkSM Mode
To make a code call using Direct Talk:
1 Press and hold the PTT button. DT Transmit
appears on the first line of the display. Begin
speaking after your phone emits the Direct Talk
tone.
2 Release the PTT button to listen.
The tone emitted from your phone when making a
Direct Talk call is 4 beeps and sounds different
from the standard tone heard with on-network
Direct Connect and Group Connect calls.
Receive All
You can set your phone to receive Direct Talk
transmissions from any phone that is set to the
same channel, regardless of the code (1-15), by
setting the code to Receive All. When you receive
transmissions with the code set to Receive All,
the display changes from Receive All to the code
on which the transmission was received.
Note: You cannot initiate a code call when the
code is set to Receive All. If you press
the PTT button with the code set to
Receive All, you will receive an error
message.
If you receive an error message:
To set the code to Receive All:
• There may be no parties on your channel or
code.
• You are out of range.
1 From the Direct Talk idle screen, press A under
Edit.
2 Scroll to Code.
3 Press A under Edit.
4 Select Receive All.
5 When you are finished, press A under Back to
return to the idle screen.
When you receive a code call using Direct Talk, DT
Receive appears on the first line of the display.
30
Private Direct TalkSM Calls
Private Direct TalkSM Calls
You can have a private conversation with another
person using Direct Talk. When on a private Direct
Talk call, no other parties can hear your
conversation. In order to make a private Direct Talk
call, you must use the valid Nextel 10-digit
Personal Telephone Number (PTN) of the person
you are calling. The person you are calling must be
in Direct Talk mode and set to the same channel to
receive your call.
If you receive an error message:
To set the code to Private Only:
1 From the Direct Talk idle screen, press A under
Edit.
2 Scroll to Code.
3 Press A under Edit.
4 Select Private Only.
Making a Private Direct Talk SM Call
1 Enter the 10-digit PTN of the person you want to
call on your channel. -orScroll to a number or name in Contacts. -or-
• You may not be using a valid PTN.
• The person that you are trying to reach may not
be in Direct Talk mode.
• The person that you are trying to reach is set to
a different channel or is out of range.
2 Press and hold the PTT button. Begin speaking
after your phone emits the Direct Talk tone.
3 Release the PTT button to listen.
Private Only
The number or name of the person you are calling
will appear in the first line of the display.
To limit Direct Talk to private conversation only, set
your code to Private Only. In this mode, code calls
will be ignored and only private calls can be made
or received.
Note: You will be required to enter a valid PTN
before pressing the PTT button.
Scroll to a number in the recent calls list.
Receiving a Private Direct TalkSM Call
The number or name of the person who initiated
the call will appear in the first line of the display.
Ending a Private Direct TalkSM Call
A private Direct Talk call will end if there is no
communication for 6 seconds.
The display will return to the idle screen.
31
Direct TalkSM
Making Emergency Calls in
Direct TalkSM Mode
Emergency phone calls can still be made even
when you are not connected to network service.
Dial 911 to be connected to an emergency
response center. If you are on an active Direct Talk
call, you must end it before calling 911.
Setup Options
Direct Talk setup options are available in the DT
Options screen in both network and Direct Talk
modes.
To access Setup Options in network:
1 From the main menu, select DirecTalk.
2 Select Setup.
To access Setup Options in Direct Talk:
1 From the main menu, select DT Options.
2 Select Setup.
You can set your phone to:
• Launch directly into Direct Talk when you select
DirecTalk from the main menu.
• Notify you periodically with a tone that you are in
Direct Talk.
32
Using Direct Launch
To set your phone to launch into Direct Talk when
you select DirecTalk from the main menu:
1 From the setup screen, scroll to Direct Launch
and press A under Change.
2 Select On.
Note: If Direct Launch is set to On, you will not
see DT Options when you select
DirecTalk from the main menu. In order to
have access to your setup options, Direct
Launch must be set to Off. Or you can
access setup options while in Direct Talk
mode by pressing m and selecting DT
Options.
To turn off Direct Launch:
1 From the setup screen, scroll to Direct Launch
and press A under Change.
2 Select Off.
Your phone now displays DT Options when you
select DirecTalk from the main menu.
Using State Tone
To set your phone to notify you with a tone that you
are in Direct Talk:
1 From the setup screen, scroll to State Tone and
press A under Change.
Setup Options
2 Select the time frame during which you want to
be notified that you are in Direct Talk.
For example, if you select 1 hour, you will be
notified every hour that you are in Direct Talk.
To turn off State Tone:
1 From the setup screen, scroll to State Tone and
press A under Change.
2 Select Off.
33
Recent Calls
The recent calls list stores the numbers of the 20
most recent calls you have made and received.
To view the recent calls list:
1 From the idle screen, press the down arrow on
the navigation key. -orFrom the main menu, select Recent Calls.
2 Scroll through the list.
If the number of a recent call is stored in Contacts,
the name associated with the number appears on
the recent calls list.
An icon appears beside the name or number
indicating the Contacts type of the number used in
the call. See “Contacts” on page 39.
For phone calls, an icon appears to the left of the
name or number giving more information about the
call:
X A call you made.
W A call you received.
V A missed call. Missed calls appear on the
recent calls list only if you have Caller ID.
34
Note: The recent calls list also stores call alerts
you have received. They appear as Direct
Connect calls. Call alerts remain in your
recent calls list until you delete them or
until they reach the end of the list.
To get more information on a recent call:
1 From the recent calls list, scroll to the call you
want information on.
2 Press A under View. -orIf View is not one of your options: Press m.
Select View.
This displays information such as the name
associated with the call, the number, the date,
time, and duration of the call.
Storing Recent Calls to
Contacts
1 From the recent calls list, scroll to the number
you want to store.
2 Press A under Store. -orIf Store is not one of your options: Press m.
Select Store.
Tip: If Store is not on this menu, the number is
already stored in Contacts.
Deleting Recent Calls
3 To store the number as a new entry, select [New
Contact]. -orTo store the number to an existing entry, select
the entry.
4 With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign to the number. For information on
Contacts types, see page 39.
5 If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 41.
6 Press A under Done.
Deleting Recent Calls
To delete a call:
1 From the recent calls list, scroll to the call you
want to delete.
2 Press m.
3 Select Delete.
4 Press A under Yes to confirm.
To delete all calls:
1 From the recent calls list, press m.
2 Select Delete All.
3 Press A under Yes to confirm.
35
Entering Text
You can enter text into your phone using the
traditional method of pressing a key several times
for each character, or by pressing a key once for
each letter while words likely to be the one you
want are chosen from a database. You can also
enter symbols and numbers into a text field.
In screens that require you to enter text, you see
the following icons near the top right corner. These
icons tell you which text input mode you are using:
l Alpha — Press a key several times for each
character.
j Word — Press a key once for each letter
while words likely to be the one you want are
chosen from a database.
i Symbols — Enter punctuation and other
symbols.
k Numeric — Enter numbers.
When you access a screen that requires you to
enter text, you start in Alpha mode.
To choose a text input mode:
1 At a screen that requires you to enter text, press
m.
36
2 A checkmark appears next to the current text
input mode. Scroll to the text input mode you
want to use.
3 Press A under Select.
Using Alpha Mode
• Press any key on the keypad to enter the letters,
numbers, and symbols on that key. For example,
to enter the letter Y, press 9 three times.
• Type a letter then scroll up to make that letter
uppercase, or type a letter then scroll down to
make that letter lowercase.
• See “Special Function Keys” on page 37 for
more information on adding spaces,
capitalization, and punctuation.
Using Word Mode
In Word mode, T9 Text Input analyzes the letters
on the keypad button you press and arranges them
to create words. As you type, T9 Text Input
matches your keystrokes to words in its database
and displays the most commonly used matching
word. You can add you own words to this
database.
Special Function Keys
Entering a Word
Choosing a Language
1 Select Word as your text input mode.
2 Type a word by pressing one key for each letter.
To change the language of the database:
For example, to type “test” press 8 3 7
8.
The displayed word may change as you type it.
Do not try to correct the word as you go. Type to
the end of the word before editing.
3 If the word that appears is not the desired word,
press 0 to change the word on the display to
the next most likely word in the database.
Repeat until the desired word appears.
If the desired word does not appear, you can add it
to the database.
Adding Words to the Database
1
2
3
4
Select Alpha as your text input mode.
Type the word using Alpha mode.
Select Word as your text input mode.
Press #.
The word you typed in Alpha text entry mode is
now in the database.
1 At a screen that requires you to enter text, press
m.
2 Select Languages.
3 Scroll to the language you want for your
database.
4 Press A under Select.
Special Function Keys
Some of the phone’s keys assume different
functions while in Alpha or Word mode.
Spaces
Press # for a space.
Capitalization
When you press and hold #, it acts as a 3-way
toggle. Press and hold # to make the next letter
typed uppercase (shift), to make all subsequent
letters typed uppercase (caps lock), or to go back
to lowercase letters.
Note: You cannot store alphanumeric
combinations, such as Y2K.
37
Entering Text
These icons appear in the top row of your display:
Using Symbols Mode
m Shift is on.
1 Select Symbols as your text input mode.
n Caps lock is on.
When neither of these icons appear, letters typed
are lowercase.
Note: Your phone automatically makes the first
letter of a sentence uppercase.
Punctuation
Press 1 or 0 to insert punctuation. Continue to
press the key to view the list of symbols available
through that key. Pause to select the symbol you
want.
Note: Additional punctuation symbols are
available in Symbols mode.
Using Numeric Mode
1 Select Numeric as your text input mode.
2 Press the number buttons on your keypad to
enter numbers.
38
A row of symbols appears along the bottom of
your phone’s display. Scroll right to view the
complete row.
2 Scroll left or right to choose the symbol you want
to enter.
3 Press A under Select.
Contacts
• A Contacts type — Each number or address
stored must be assigned a Contacts type:
Contacts stores up to 600 numbers or addresses.
Each Contacts entry can store several numbers or
addresses.
A
Mobile
phone number
DC
Direct Connect number
Information stored in Contacts is saved on your
SIM card.
B
C
Work1
phone number
A Contacts entry contains:
D
Work2
phone number
• A name — A name is required if you are storing
more than one number or address to the entry;
otherwise, it is optional. Typically, this is the
name of the person whose contact information is
stored in the entry.
• A ring tone — You can assign a ring tone to
each entry. This is the sound your phone makes
when you receive phone calls or call alerts from
any of the numbers stored in the entry.
E
Home
phone number
F
Email
email address
G
Fax
phone number
H
Pager
phone number
T
Talkgroup
Talkgroup number
H
Scangroup Scangroup number
J
IP
IP address
K
Other
phone number
• A number or address — Each Contacts entry
must contain a number or address. This may be
any type of phone number, Direct Connect
number, Talkgroup number, Scangroup number,
email address, or IP address.
39
Contacts
Note: You can store numbers up to 64 digits
long, but every 20 digits must be
separated by a pause or wait. See
“Creating Pauses and Waits” on page 44.
• A Speed Dial number — When you store a
phone number, it is assigned a Speed Dial
number. You can accept the default Speed Dial
number or change it.
• A voice name — If you create a voice name for a
number, you can then dial that number by saying
the voice name into your phone. This icon
appears P to the left of the Contacts type icon if
a voice name is assigned.
Viewing Contacts
To access Contacts:
Press A under Contcs. -orFrom the main menu, select Contacts. -orIf you are on a call: Press m. Select Contacts.
To view entries:
1 From the Contacts list, scroll to the entry you
want to view.
2 If an entry has more than one number or
address stored, <> surrounds the Contacts type
icon. Scroll left or right to view the icon for each
number stored in the entry.
40
3 When the icon for the number or address you
want to view is displayed, press A under View.
-orIf View is not one of your options: Press m.
Select View.
4 Scroll to view the other numbers and addresses
stored for the entry.
Tip: To view more entries, continue scrolling.
Searching for a Name
To search for a name in Contacts:
1 From the Contacts list, press m.
2 Select Search.
3 Enter the name you want to see. See “Entering
Text” on page 36.
4 Press A under Ok.
Your phone finds the name you entered or the
nearest match.
Showing Only Direct Connect®
Numbers and Groups
To set Contacts to show only entries that contain
Direct Connect numbers and entries for Talkgroups
and Scangroups:
1 From the Contacts list, press m.
Creating Entries
2 Select Filter.
3 With DC/GC/Scngrp highlighted, press A
under Select.
To set Contacts to show all entries:
1 From the Contacts list, press m.
2 Select Filter.
3 With Show All highlighted, press A under
Select.
Creating Entries
A number or address and a Contacts type are
required for all Contacts entries. Other information
is optional. You may enter the information in any
order by scrolling through the entry details.
After you have entered the number or address,
Contacts type, and any other information you want,
you can press A under Done to save the entry to
Contacts.
To cancel a Contacts entry at any time press, e to
return to the idle screen.
Tip: In some fields that require you to enter
information, you can begin entering the
information from the keypad instead of
pressing A under Change.
To create a Contacts entry:
1 To access the entry details screen:
Select Contacts > [New Contact]. -orFrom the Contacts list, press m. Scroll to New.
Press A under Select.
2 If you want to assign a name to the entry:
With the Name field highlighted, press A under
Change.
Enter the name. See “Entering Text” on page
36. When you are finished, press A under Ok.
3 If you want to assign a ring tone to the name:
With the Ringer field highlighted, press A
under Change.
Scroll to the ring tone you want to assign. Press
A under Select.
4 To assign a Contacts type to the number or
address being stored:
With the Contacts type field highlighted, press
A under Change.
Scroll to the Contacts type you want to assign.
Press A under Select.
5 To store a number or address:
41
Contacts
With the # field highlighted (or ID for an email
address, or IP for an IP address), press A
under Change.
Enter the number or address. For phone
numbers, use the 10-digit format. For email
addresses, see “Entering Text” on page 36.
Tip: Press A under Browse to select a number
or address from Contacts, the recent calls
list, or Memo.
When you are finished, press A under Ok.
6 If you want to assign a Speed Dial number to the
number, press A under Change with the
[Options] field highlighted. See “Assigning
Options”.
7 If you want to add more numbers or addresses
to the entry:
Scroll past the information you already entered.
Enter the additional information for the entry
using step 2 through step 6. You must assign a
name to the entry, if you have not already.
8 Press A under Done.
Assigning Options
1 If you have not already, press A under Change
with the [Options] field highlighted.
42
2 The default Speed Dial number assigned to a
phone number is displayed in the Speed # field.
This is always the next available Speed Dial
location.
If you want to assign the phone number to a
different Speed Dial location:
With the Speed # field highlighted, press A
under Change.
Press and hold A under Delete to delete the
current Speed Dial number.
Enter the new Speed Dial number using the
keypad.
When you are finished, press A under Ok.
3 If you want to create a voice name for a phone
number, scroll to Voice Name and press A
under Record.
As directed by the screen prompts, say and
repeat the name you want to assign to the
number. Speak clearly into the microphone.
4 When you are finished, press A under Back.
Storing Numbers Faster
Storing Numbers Faster
Editing Entries
To store numbers to Contacts from the recent calls
list, see “Storing Recent Calls to Contacts” on page
34.
1 From the Contacts list, scroll to the entry you
want to edit.
2 Press m.
3 Select Edit. The entry details screen displays.
4 Follow the applicable instructions in “Creating
Entries” on page 41 to edit the various fields.
To store numbers to Contacts from Memo, see
“Memo” on page 46.
To store numbers to Contacts from the idle screen:
1 Use the keypad to enter the number you want to
store.
2 Press m.
3 Select Store Number.
4 To store the number as a new entry, select [New
Contact]. -orTo store the number to an existing entry, select
the entry.
5 With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign to the number.
6 If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 41.
7 Press A under Done.
Deleting Entries
Delete an Entry
1 From the Contacts list, scroll to the entry you
want to delete.
2 Press m.
3 To delete the entire entry, scroll to Delete
Contact.
4 Press A under Select.
5 Press A under Yes to confirm.
Delete a Number or Address
1 From the Contacts list, scroll to the entry that
contains the number or address you want to
delete.
2 Scroll left or right to display the Contacts type for
the number you want to delete.
3 Press m.
43
Contacts
4 Scroll to Delete Number.
5 Press A under Select.
6 Press A under Yes to confirm.
Note: If an entry contains only one number or
address, deleting the number or address
deletes the entry.
If you store 17035551235P1234, when you select
this number and make a call, your phone dials the
first 11 digits, pauses for 3 seconds, then dials the
last 4 digits.
Checking Capacity
To program a wait:
To see how many numbers are stored in Contacts:
1 From the Contacts list, press m.
2 Select Capacity.
Creating Pauses and Waits
When storing a number, you can program your
phone to pause or wait between digits while
dialing. A pause makes your phone pause for 3
seconds before dialing further. A wait makes your
phone wait for your response before dialing further.
This feature is useful when using voice mail or
other automated phone systems that require you to
dial a phone number and then enter an access
number.
To program a pause:
Press and hold * until the letter P appears.
The P represents a 3-second pause.
44
If you want a pause longer than 3 seconds, press
and hold * more than once. Each P represents a
3-second pause.
Press and hold * until the letter W appears.
The W means your phone waits before dialing
further.
If you store 17035551235W1234, when you select
this number and make a call, your phone dials the
first 11 digits and then waits. A message appears
asking if you want to send the rest of the digits.
Press A under Yes to dial the last 4 digits.
Tip: You can create pauses and waits while
dialing a number from the keypad. See
“Creating Pauses and Waits While Dialing”
on page 52.
International Numbers
International Numbers
When storing a number that you plan to use for
international calls, use Plus Dialing:
1 Press and hold 0 for two seconds. A “0”
appears, then changes to a “+”.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
2 Enter the country code, city code or area code,
and phone number.
For information about making international calls,
see “Making International Calls” on page 52.
45
Memo
Memo lets you store a number, make a call to that
number, and save it to Contacts.
To create a memo:
1 From the main menu, select Memo.
2 Enter the number using your keypad.
3 Press A under Store.
To view the memo later:
1 From the main menu, select Memo.
To delete the memo:
1 From the main menu, select Memo.
2 Press and hold A under Delete.
3 Press A under Store.
To edit the memo:
1 From the main menu, select Memo.
2 Enter the new number.
3 Press A under Store.
To make a call to the memo number:
1 From the main menu, select Memo.
2 To make a phone call, press s. -orTo make a Direct Connect call, press the PTT
button.
46
To store the memo number to Contacts:
1
2
3
4
From the main menu, select Memo.
Press m.
Press A under Select.
To store the number as a new entry, select [New
Contact]. -orTo store the number to an existing entry, select
the entry.
5 With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign to the number.
6 If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 41.
7 Press A under Done.
Call Forwarding
Call forwarding sends calls to the phone numbers
you specify. You can forward all calls to one
number or forward missed calls to different
numbers depending on the reason you missed the
call.
You can forward phone lines 1 and 2
independently.
To forward all calls:
1
2
3
4
5
6
From the main menu, select Call Forward.
Press A under Change.
Select All Calls.
Scroll to To.
Press A under Change.
If you specified a forwarding number for all calls
before, this number displays.
Forwarding All Calls
To forward calls to this number, press A under
Back. -or-
When you set your phone to forward all calls, an
icon appears in the top row of the display:
To delete this number, press A under Change,
then press and hold A under Delete.
G Phone line 1 is active; calls to phone line 1
are being forwarded.
H Phone line 1 is active; calls to phone line 2
are being forwarded.
I Phone line 1 is active; calls to phone lines 1
and 2 are being forwarded.
To enter the number you want to forward calls
to:
Enter the number using your keypad. -orPress A under Search. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
7 Press A under Ok.
J Phone line 2 is active; calls to phone line 1
are being forwarded.
All your calls are now forwarded to the number you
specified.
K Phone line 2 is active; calls to phone line 2
are being forwarded.
Tip: In some fields, you can select an option by
scrolling left or right instead of pressing A
under Change.
L Phone line 2 is active; calls to phone lines 1
and 2 are being forwarded.
47
Call Forwarding
Turning Off Call Forwarding
Note: If you want a type of missed call sent to
voice mail, the call forwarding number for
that type of missed call must be your
voice mail access number. In most cases,
your voice mail access number is your
area code + first 3 digits of your PTN +
MAIL (6245). To verify your voice mail
access number, contact Nextel Customer
Care.
If you don’t want all your calls forwarded, turn the
feature off:
1
2
3
4
5
6
7
From the main menu, select Call Forward.
Press A under Change.
Select All Calls.
Scroll to To.
Press A under Change.
Scroll to Off.
Press A under Select.
All your calls are now sent to your phone.
Calls you miss are forwarded according to the
options set for missed calls. By default, missed
calls are forwarded to voice mail.
Forwarding Missed Calls
To forward missed calls:
1
2
3
4
From the main menu, select Call Forward.
Press A under Change.
Select Detailed.
Scroll to If Busy to specify a forwarding number
for calls received when your phone is busy.
5 Press A under Change.
6 If you specified a forwarding number for this type
of call before, this number displays.
You can specify a forwarding number for each type
of missed call:
To forward calls to this number, press A under
Back and go to step 9. -or-
• If Busy — Your phone is on a call or transferring
data.
• If No Answer — You do not answer on the first
4 rings.
• If Unreachable — Your phone is out of
coverage or powered off.
To delete this number, press A under Change,
then press and hold A under Delete.
48
7 To enter the number you want to forward this
type of call to:
Enter the number using your keypad. -or-
Viewing Call Forwarding Settings
Press A under Search. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
8 Press A under Ok.
9 Repeat step 4 through step 8 for If No Answer
and If Unreachable.
When you are finished, press A under Back.
Viewing Call Forwarding
Settings
1
2
3
4
5
6
From the main menu, select Call Forward.
Press A under Change.
Select All Calls.
Scroll to To.
Press m.
Select Retrieve Status.
49
Advanced Calling
Features
Call Waiting
Call Waiting lets you receive a second call while on
an active call. Call Waiting is always available,
unless you turn it off for a specific call.
Switching Between Calls
When you accept a second call, the display shows
the name or number of each call, with an icon
indicating which call is active:
Y Phone call is active.
Z Phone call is on hold.
If you are on a call and receive a second call, your
phone emits a tone and displays a message saying
you are receiving a second call.
To make the call on hold active and put the active
call on hold:
To accept the second call and put the active call on
hold:
Turn Off Call Waiting
Press A under Yes.
To accept the second call and end the active call:
1 Press e.
Your phone rings with the second call.
2 Answer the second call.
To decline the second call:
Press A under No. If you subscribe to voice
mail, the call is forwarded to your voice mail box,
unless you set Call Forward for If Busy to a
different number.
50
Press A under Switch.
To turn off Call Waiting during a call:
1
2
3
4
Press m.
Select In Call Setup > Call Waiting.
Press A under Change.
Scroll to Off.
Tip: To turn Call Waiting back on while still on
the call: Scroll to On.
5 Press A under Select.
Call Hold
To turn off Call Waiting for the next call you make
or receive:
To end the second call and make the call on hold
active again:
1 From the main menu, select Settings > Phone
Calls > Call Waiting.
2 Press A under Change.
3 Scroll to Off.
4 Press A under Select.
To make the call on hold active and put the active
call on hold:
Call Waiting is turned back on when you end the
call.
Call Hold
Call Hold lets you put an active call on hold and
make a second call.
To put a call on hold:
1
2
3
4
While on an active call, press m.
Scroll to Hold.
Press A under Select.
If you want to make the call active again, press
A under Resume.
Press e.
Press A under Switch.
Making a 3-Way Call
1
2
3
4
Place or receive a phone call.
While the call is active, press m.
Select 3 Way. This puts the call on hold.
Enter the second phone number you want to
call.
Tip: For quick ways to enter the number, press
m.
5 Press s to place the call.
6 Press A under Join.
All 3 people in the call can speak to and hear each
other.
To make a second call while a call is on hold:
1 Enter the number you want to call.
Tip: To enter the number from Contacts: Press
m. Select Contacts.
2 Press s to place the call.
51
Advanced Calling Features
Creating Pauses and Waits
While Dialing
Calls placed between the United States and
Canada do not require an international access
code.
You can enter a pause or wait while dialing a
number. For more information on pauses and
waits, see “Creating Pauses and Waits” on page
44.
Plus Dialing lets you place an international call to
most countries without entering the local
international access code.
To create a pause while dialing a phone number:
1 From the keypad, enter the digits you want to
occur before the pause.
2 Press m.
3 Select Insert Pause.
4 Enter the digits you want to occur after the
pause.
To create a wait while dialing a phone number:
1 From the keypad, enter the digits you want to
occur before the wait.
2 Press m.
3 Select Insert Wait.
4 Enter the digits you want to occur after the wait.
Making International Calls
Your service default is “International Calls
Restricted.” Contact Nextel Customer Care to
obtain international dialing access.
52
1 Press and hold 0 for two seconds. A “0”
appears, then changes to a “+”.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
2 Enter the country code, city code or area code,
and phone number.
Setting One Touch Direct
Connect®
One Touch Direct Connect sets your phone to call
the most recent Direct Connect number on the
recent calls list, or a Direct Connect number you
choose, every time you press the PTT button.
To set your phone to call the most recent Direct
Connect number on the recent calls list:
1 From the main menu, select Settings > DC/GC
Options > One Touch DC.
2 Scroll to Last Call.
Group ConnectTM Calls, Talkgroups, and Scangroups
3 Press A under Select.
To set your phone to call a Direct Connect number
you choose:
1 From the main menu, select Settings > DC/GC
Options > One Touch DC > Assigned
Number.
2 To enter the Direct Connect number you want
your phone to call every time you press the PTT
button:
Enter the number using your keypad. -orPress A under Search. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
Tip: If you are entering a Talkgroup number,
enter # before the number.
3 Press A under Ok.
To turn off One Touch Direct Connect:
1 From the main menu, select Settings > DC/GC
Options > One Touch DC.
2 Scroll to Off.
3 Press A under Select.
Group ConnectTM Calls,
Talkgroups, and Scangroups
A Group Connect call is similar to a Direct Connect
call, but is made to all members of a Talkgroup at
once. A Talkgroup is a predetermined group of up
to 25 Nextel customers.
A Scangroup consists of 1 to 4 Talkgroups. You
can make and receive calls on one of these
Talkgroups, called the primary Talkgroup. You can
set your phone receive calls, but not make calls, on
the other Talkgroups.
You must join a Talkgroup to make or receive calls
on that Talkgroup. On your i325 phone, you join a
Talkgroup by joining the Scangroup it belongs to.
On your i325 phone, all Group Connect calls you
make are Scangroup calls. Group Connect calls
you receive are Scangroup calls or Talkgroup calls
to Talkgroups in the Scangroup you have joined.
Setting Up Talkgroups and
Scangroups
Contact your Nextel Sales Representative at the
time of activation to set up your Talkgroups and
Scangroups. When you enable security on your
phone, you receive a list of Groups that have been
set up for you. The lists are saved to Contacts.
53
Advanced Calling Features
You can set up more Groups in 2 ways:
• Using Group Connect Management* on
MyNextel at www.nextel.com.
* You must be an account administrator to use Group Connect
Management.
• Using Wireless Manager to create, manage, and
delete Groups.
When you create your Groups, you can select your
own Group numbers.
Talkgroups Not in Scangroups
If you have a Talkgroup saved to Contacts that is
not in a Scangroup, you cannot join that Talkgroup
from Contacts or the recent calls list unless you
create a Scangroup for it in Contacts.
To create a Scangroup for a Talkgroup:
1 Begin creating a new Contacts entry. See
“Creating Entries” on page 41.
2 Assign the Scangroup Contacts type to the
entry.
3 Assign the Talkgroup number as the number of
the Scangroup.
This creates a Scangroup with the same number
as the Talkgroup it contains.
54
You can also join a Talkgroup that is not in a
Scangroup by pressing # and then entering the
Talkgroup number using the keypad. Your phone
treats this as if you had joined a Scangroup
containing only that Talkgroup.
Joining a Scangroup
To make and receive Group Connect calls, you
must join a Scangroup.
When you join a Scangroup, you can make or
receive Group Connect calls only with Talkgroups
in that Scangroup. You can only belong to one
Scangroup at time.
To join a Scangroup:
1 Press #. Enter the Scangroup number using
the keypad. -orScroll to the Scangroup name in Contacts or
recent calls list.
2 Press A under Join.
Viewing Scangroup Details
While you belong to a Scangroup, you can see
which Talkgroups are in it.
1 From the recent calls list, scroll to the
Scangroup.
2 Press m.
Group ConnectTM Calls, Talkgroups, and Scangroups
3 Select Details.
The primary Talkgroup is shown first, after the
Scangroup number.
Tip: You can also view this information while in a
Scangroup call: Press m. Select Details.
Making Group Connect
TM
Calls
1 Press #. Enter the Scangroup number using
the keypad. -orScroll to the Scangroup name in Contacts or
recent calls list.
2 Proceed as if making a Direct Connect call.
Receiving Group ConnectTM Calls
To answer a Group Connect call:
Proceed as if answering a Direct Connect call.
Only one person at a time may speak on a
Group Connect call.
When you receive a Group Connect call, the
following appears on the screen:
• The name of the Scangroup
• The name or number of the primary Talkgroup in
the Scangroup
• The Direct Connect number of the person
speaking
You can set your phone to receive Group Connect
calls from all the Talkgroups in a Scangroup or only
from the primary Talkgroup. See “Setting
Talkgroup Scan”.
Setting Talkgroup Scan
To set your phone to receive Group Connect calls
from all the Talkgroups in a Scangroup:
1 From the main menu, select Settings > DC/GC
Options > Scan.
2 Press A under Change.
3 Scroll to On.
4 Press A under Select.
To set your phone to receive Group Connect calls
only from the primary Talkgroup in a Scangroup:
Scroll to Off in step 3.
Tip: You can also set this option from Contacts,
from the recent calls list, or after you begin
entering a number using the keypad: Press
m. Select Call Setup > Scan.
Turning off Group ConnectTM Calls
To control whether you hear Group Connect calls:
1 From the main menu, select Settings > DC/GC
Options > Tkgrp Silent.
2 Press A under Change.
55
Advanced Calling Features
3 Scroll to On if you don’t want to hear Group
Connect calls. -orScroll to Off if you want to hear Group Connect
calls.
Note: Setting Tkgrp Silent to On prevents you
from hearing Emergency Group Connect
calls.
Emergency Group Connect
Calls
SM
An Emergency Group Connect call is a Scangroup
call that takes priority over all other phone activities
in the phone making the call and sounds a special
emergency tone in the phones receiving the call.
When you make an Emergency Group Connect
call, a Group Connect call is made using a
designated emergency Scangroup or the
Scangroup you currently belong to.
A designated emergency Scangroup must be
created for you by Nextel Customer Care and is
stored on your SIM card.
If no designated emergency Scangroup has been
created for you, Emergency Group Connect calls
you make are made using the Scangroup you
currently belong to. If no designated emergency
Scangroup has been created for you and you have
not joined a Scangroup, you cannot make
Emergency Group Connect calls.
Note: Contact Nextel Customer Care for more
information about having your phone set
up to make Emergency Group Connect
calls.
Making an Emergency Group
ConnectSM Call
Important: Making an Emergency Group Connect
call ends all other activity on your
phone, including 911 emergency calls.
Unlike other Group Connect calls, pressing the
PTT button does not start an Emergency Group
Connect call. Pressing t starts the call. Pressing
the PTT button lets you begin talking.
To make an Emergency Group Connect call:
1 Press and hold t for 3 seconds to start the
Emergency Group Connect call.
2 Press and hold the PTT button on the side of
your phone to talk. Begin talking after your
phone emits a chirping sound.
56
Call Timers
3 Release the PTT button to listen.
To end an Emergency Group Connect call:
Press and hold t for 3 seconds.
An Emergency Group Connect call automatically
ends if there is no activity for 30 seconds.
Emergency Group Connect calls you make do not
appear in the recent calls list.
Receiving an Emergency Group
ConnectSM Call
When receive an Emergency Group Connect call,
your phone sounds a special emergency tone,
unless your phone is set to make no sounds.
To answer an Emergency Group Connect call:
Proceed as if answering a Direct Connect call.
Emergency Group Connect calls you receive do
not appear in the recent calls list.
Call Timers
Call timers measure the duration of your phone
calls, Direct Connect or Group Connect calls, and
circuit data use, as well as the number of Kilobytes
sent and received by your phone:
• Last Call — displays the duration of your most
recent phone call.
• Phone Reset — keeps a running total of your
phone call minutes, until you reset it.
• Phone Lifetime — displays the total minutes of
all your phone calls.
• DC/GC Reset — keeps a running total of all of
your Direct Connect and Group Connect call
minutes, until you reset it.
• DC/GC Lifetime — displays the total minutes of
all your Direct Connect and Group Connect
calls.
• Circuit Reset — keeps a running total of all of
your circuit data use, until you reset it.
• Circuit Lifetime — displays the total minutes of
all of your circuit data use.
• Kbytes Reset — keeps a running total of the
number of Kilobytes sent and received by your
phone, until you reset it.
To view or reset a timer:
1 From the main menu, select Call Timers.
2 Select the feature you want to view or reset.
3 To view a feature without resetting: Press A
under Done when you are finished viewing.
-orTo reset a feature: Press A under Reset. Press
A under Yes to confirm.
57
Advanced Calling Features
Note: The values displayed by Call Timers
should not be used for billing. Call timers
are estimates only.
2 With the phone’s display facing up, insert a data
cable’s connector into the accessory connector,
until you hear a click.
Using Your Phone as a Modem
To use your phone as a modem with a laptop,
handheld device, or desktop computer:
1 Open the connector cover.
connector
cover
3 Insert the data plug into the COM port of the
other device.
When used as a modem, your phone has these
data transfer modes:
• Circuit data — used for sending and receiving
faxes and for transferring large files
• Packet data — used for small file transfers such
as email
To use these services, you must install the iDEN
Wireless Data Services software (available
separately) and subscribe to a Nextel Wireless
Web access plan. For more information go to
www.nextel.com and click on Nextel Online/
Wireless Web Access under the Services tab.
Note: Remember to close the connector cover
after a data session.
58
Making TTY Calls
Making TTY Calls
From the main menu, select Settings > Phone
Calls > TTY. This field must say On.
To use your phone to make phone calls using a
teletypewriter (TTY) device:
Choosing a Mode
1 Connect one end of a 2.5mm cable into the
audio jack on your phone. Connect the other
end of the cable to your TTY device.
2 Make sure that your phone’s TTY feature is on
and select the TTY mode you want to use.
3 Use your phone to enter phone numbers and
make calls.
When you make a TTY call, these icons appear on
the phone’s display:
N Phone call is active.
O Phone call is on hold.
TTY device features such as Turbo-Code,
High-Speed, and Interruption are not supported by
your phone. These features must be turned off or
disabled to use your TTY device with your phone.
Your phone supports these TTY modes:
• TTY — You type and read text on your TTY
device.
• VCO (Voice-Carry-Over) — You speak into your
phone and read text replies on your TTY device.
• HCO (Hearing-Carry-Over) — You type text on
your TTY device and listen to voice replies on
your phone speaker.
To change mode while not in a call:
1 From the main menu, select Settings > Phone
Calls > TTY > Type.
2 Press A under Change.
3 Scroll to the TTY mode you want.
4 Press A under Select.
When you make a TTY call, the call begins in the
TTY mode you last selected.
Turning On the TTY Feature
To change mode during a call using your phone:
Your phone’s TTY feature must be on if you want
to make TTY calls, set the TTY mode, or change
the TTY baud rate. To make sure the TTY feature
is on:
1 Press m.
2 Select In Call Setup > TTY > Type.
3 Select the mode you want.
59
Advanced Calling Features
To change mode during a call using your TTY
device, issue one of the following commands:
Special Dialing Codes
• “VCO please” — to select VCO mode
• “HCO please” — to select HCO mode
• “HCO off please” — to turn off HCO mode
Non-Emergency Numbers
Important: When you are using HCO, the sound
coming from your phone speaker may
be uncomfortably loud. Use caution
when putting the phone to your ear.
(For information on setting the volume
of your phone speaker, see “Setting the
Volume” on page 102.)
Changing the TTY Baud Rate
By default, your phone’s TTY baud rate is set to
45.45, the baud rate required for TTY calls within
the U.S. To make calls outside the U.S., set your
TTY baud rate to 50.0.
To change the TTY baud rate:
1 From the main menu, select Settings > Phone
Calls > TTY > Baud.
2 Press A under Change
3 Scroll to the baud rate for your location.
4 Press A under Select.
60
Nextel supports many “non-emergency” numbers
(such as #77, 311,...) provided by local and state
governments. These numbers are used to report
non-emergency incidents. If the situation includes
imminent danger or loss of life, you should dial
911.
Telecommunications Relay Service
Nextel supports services for communicating with
speech and/or hearing impaired individuals. You
can dial 711 to reach a local Telecommunications
Relay Center. You will then be connected to your
destination number. Relay service works through a
Communications Assistant who reads messages
typed into a TDD/TTY device by a speech or
hearing impaired individual to you. The
Communications Assistant then types your spoken
messages to the hearing or speech impaired
individual. Telecommunications Relay Service is
available 24 hours a day, seven days a week, and
every call is strictly confidential.
Note: Using 711 to reach Telecommunications
Relay Service may not be available in all
areas.
Nextel® Phone Services
Per-Line Blocking
Contact Nextel Customer Care to obtain these
services or for additional information:
You can permanently block delivery of your phone
number on every call you make.
Note: Some services are not available outside
of the continental United States.
To show your number on a per-call basis:
Press * 8 2 before dialing the call.
Caller ID
Alternate Line Service
Your phone can automatically display the phone
number or name (if the 10-digit phone number is
stored in your Contacts) of the person calling
(unless blocked by the caller), enabling you to
decide whether to take the call or forward it to voice
mail.
You can have two different phone numbers on the
same phone. With Alternate Line Service, you can:
Caller ID information is not available on all calls.
Per-Call Blocking
You can block delivery of your phone number to
other Caller ID units for a single phone call:
Press * 6 7 before dialing the call.
Your Nextel phone number cannot be blocked from
calls made to 911, 800, 855, 866, 877, 888, or
other toll- free phone numbers.
• Set up different billing addresses for each phone
line.
• Use different ringer styles so that you can tell
which line is receiving the call.
• Forward incoming calls to the primary and
alternate line to different phone numbers.
To set the active line:
1 From the main menu, select Settings > Phone
Calls > Set Line.
2 Select the phone line you want to be the active
line.
When calls made to the line that is not active are
set to be forwarded to the active line, these calls
are sent to voice mail without ringing. See “Call
Forwarding” on page 47.
61
Nextel® Phone Services
Call Restrictions
You can prevent your phone from making or
receiving long distance, incoming, and outgoing
(except 911) calls.
Nextel® 411
You can call Nextel 411 within the continental
United States and Hawaii. Services include white
and yellow page listings, driving directions,
restaurant reservations, movie listings and
showtimes, and local event information.
62
Ring Tones
Setting Your Phone to Vibrate
To set the ring tone your phone makes when you
receive phone calls, message notifications, or call
alerts:
You can set your phone to vibrate instead of
making a sound when you receive all phone calls,
Direct Connect calls, Group Connect calls,
messages notifications, and call alerts.
1 From the main menu, select Ring Tones.
2 Make sure Vibrate All is set to Off.
3 Scroll through the list of ring tones and select the
one you want to assign. Vibrate sets your phone
to vibrate instead of making a sound; Silent sets
your phone to neither vibrate nor make a sound.
Tip: Highlighting a ring tone lets you hear it.
4 Press A under Assign.
5 Scroll to the feature you want to assign the ring
tone to.
6 Press A under Select.
Tip: A checkmark next to a feature means the
current ring tone has been assigned to it. To
remove the assignment: Scroll to the
feature. Press A under Select.
7 To assign the ring tone to other features, repeat
step 5 through step 6.
8 When you are finished, press A under Done.
Note: This icon M appears on the display if
you set your phone to neither vibrate nor
make a sound for phone calls.
1 From the main menu, select Ring Tones.
2 With Vibrate All highlighted, scroll left or right to
set Vibrate All to On.
Tip: Pressing the volume controls to turn down
the volume as far as possible sets Vibrate
All to On.
To set your phone to vibrate instead of making a
sound for some features but not others:
1
2
3
4
5
From the main menu, select Ring Tones.
Make sure Vibrate All is set to Off.
Scroll through the list of ring tones to Vibrate.
Press A under Assign.
Scroll to the feature you want to set to make no
sound.
Note: To set ring options for Direct Connect calls
and Group Connect calls, see “Setting
Your Phone to Not Ring” on page 102.
6 Press A under Select.
7 To assign Vibrate to another feature, repeat
step 5 through step 6.
63
Ring Tones
8 When you are finished, press A under Done.
These icons indicate how the ringer is set.
v The phone always vibrates instead of making
a sound.
R The phone vibrates instead of making a
sound for phone calls.
u DC/GC speaker set to off.
These icons may appear at the same time.
Ring and Vibrate
To set your phone to ring and vibrate when you
receive phone calls or call alerts:
1 From the main menu, select Ring Tones.
2 Make sure Vibrate All is set to Off.
3 Scroll through the list of ring tones and select the
one you want to assign.
4 Press m.
5 Select Assign w/Vibe.
6 Select the feature you want to set to ring and
vibrate.
7 When you are finished, press A under Done.
This icon S appears on the display.
64
Assigning Ring Tones to
Contacts
You can set the ring tone your phone makes when
you receive phone calls or call alerts from
someone you have stored in Contacts.
1 From the main menu, select Ring Tones.
2 Make sure Vibrate All is set to Off.
3 Scroll through the list of ring tones to the one
you want to assign. Highlighting a ring tone lets
you hear it.
4 Press A under Assign.
5 Select A Contact.
6 Scroll to the Contacts entry you want to assign
the ring tone to.
7 Press A under Select.
Viewing Ring Tone
Assignments
1
2
3
4
5
From the main menu, select Ring Tones.
Make sure Vibrate All is set to Off.
Highlight any ring tone.
Press m.
Select Overview.
Downloading More Ring Tones
6 Scroll to view ring tones assigned to features
and Contact entries.
5 Select Memory Usage.
Downloading More Ring
Tones
Deleting Custom Ring Tones
If you want to use other ring tones, you can
download them into your phone for a fee. Check
the Downloads menu option on your phone for a
catalog of items available for purchase and
download directly from your phone.
You can also go to www.nextel.com/downloads for
a wide selection of available ring tones and
downloading instructions.
Deleting custom ring tones frees memory.
To delete a custom ring tone:
1
2
3
4
5
6
From the main menu, select Ring Tones.
Make sure Vibrate All is set to Off.
Scroll to the ring tone you want to delete.
Press m.
Select Delete.
Press A under Yes to confirm.
Note: Ring tones may be downloaded only
once. If you delete a ring tone from your
phone, you must purchase it again to
download it again.
Managing Memory
To view the amount of memory available for
custom ring tones:
1
2
3
4
From the main menu, select Ring Tones.
Make sure Vibrate All is set to Off.
Highlight any ring tone.
Press m.
65
Message Center
The message center manages your messages.
When you receive the following types of
messages, you can access them through the
message center:
• Voice mail messages
• Short Message Service (SMS) messages
• Two-Way messages
You can listen to or view these messages, delete
them, or continue to store them in the message
center.
Accessing the Message
Center
From the main menu, select Messages.
Message Center Options
• Voice Mail — access voice mail messages you
have received.
• SMS — access SMS messages you have
received.
• Net Alert — access Two-Way messages you
have received.
66
Receiving Messages
When you receive a voice mail message, Short
Message Service (SMS) message, or Net alert,
you have 2 ways to access the message:
• Respond to the message notification that
appears when the message is received.
• Dismiss the message notification and access
the message later through the message center.
Message Notifications
When you receive a message, your phone notifies
you with text on the display and a notification tone
or vibration. You can access the message or
dismiss the notification.
If you dismiss the notification, the message is not
deleted. It can be accessed through the message
center.
If you are not on a phone call when you receive a
message, your phone sounds a notification tone
every 30 seconds until you access the message,
you dismiss the notification, or the alert time-out
expires.
Setting Notification Options
To control whether your phone sounds message
notification tones while you are on phone calls:
1 From the main menu, select Settings > Phone
Calls > Notifications.
2 Choose the option you want:
• Receive All — Tones sound during calls for
all types of messages.
• Msg Mail Only — Tones sound during calls
for SMS messages; tones for all other types
of messages are held until you end calls.
• Delay All — Tones for all types of messages
are held until you end calls.
Note: Delay All is the default setting.
3 Press A under Select.
Tip: To set notification options during a call:
Press m. Select In Call Setup >
Notifications.
67
Receiving Messages
Message Center
All your messages are stored in the message
center. The message center shows how many
messages you have of each type.
To access your messages through the message
center:
1 From the main menu, select Messages.
2 Scroll to the type of message you want to
access.
3 Press A under the display option on the left.
Note: In order for you to access voice mail for
the first time, you must access it by dialing
into your voice mail box using your PTN. If
there is already a message in your voice
mail box, then you can access your voice
mail through the message center.
68
Voice Mail Messages
Receiving a Message
When you receive a voice mail message, New
Voice Mail Message appears on the display.
To call Nextel’s voice mail system and listen to the
message:
Press A under Call.
To dismiss the message notification:
Sending Unanswered Calls to
Voice Mail
To send a phone call to voice mail instead of
answering it:
Press e. -orPress A under No.
If the caller leaves a message, this icon y
appears on the display, reminding you that you
have a new message.
Press A under Back. This icon y appears
on the display, reminding you that you have a
new message.
Accessing Voice Mail from
the Message Center
1 From the main menu, select Messages > Voice
Mail.
2 Press A under Call to call Nextel’s voice mail
system.
69
Nextel® Voice Mail
Note: To receive voice mail messages, you must
first set up your voice mail box.
Note: If you are bringing your phone number
from another carrier, we suggest you set
up your voice mail box after the number
you brought to Nextel is active on your
Nextel phone and your temporary phone
number is deactivated. If you set up your
voice mail box prior to this, all messages
and all settings (including your greeting
and password) will be lost when the
number you have brought to Nextel
becomes active.
Setting Up Your Voice Mail
Box
Using your i325 phone, dial your 10-digit Nextel
Personal Telephone Number (PTN). For example:
7035557777. Follow the system instructions to
create a new 4- to 7-digit password, record your
name, and record a greeting. When the system
says, “Thank you for using Nextel Voice Mail,” your
mail box is set up.
If you are calling from a phone other than your
i325, dial your 10-digit Nextel PTN. When you hear
the greeting, press the star key to access your
voice mail box. The system will prompt you to enter
your password. Enter the last seven digits of your
Nextel PTN. For example: 5557777. This is your
temporary password.
You are in the main voice mail menu when you
hear the options listed below.
• To play your messages, press 1. (This option
plays only if you have new or saved messages.)
• To record a message, press 2.
• To change your greeting, press 3.
• To access your personal options, press 4.
If you press * while you are in a sub-menu, you
will go to the previous menu. If you press **,
you will go to the main voice mail menu. From the
main voice mail menu, press # to exit voice mail.
At any time, you may end the call by pressing e.
Playing Messages
When you receive a new voice mail message, you
can either listen to it immediately by pressing A
under Call, or later by pressing A under Back.
These are options available while you are listening
to your messages:
70
Changing Your Password
• Backup — press 1.
• Rewind to beginning of message — press
11.
• Pause or continue the current message — press
2.
• Fast forward — press 3.
• Fast forward to end of message — press 33.
• Play the date and time stamp — press 55.
These options are available while a message is
playing or after it has played:
• Forward the message to another subscriber —
press 6.
• Delete the message — press 7.
• Reply to a message — press 8.
• Save the message — press 9.
• Skip to the next message — press #.
Messages that are not saved or deleted remain in
your mail box as new messages. All messages are
automatically deleted after 30 days.
To retrieve deleted messages, press * 3. This
option only applies to the current voice mail
session. If you end the call, the messages will be
permanently deleted.
Important: After exiting the voice mail session, you
cannot recover deleted messages.
Changing Your Password
1 From the main voice mail menu, press 4 to
access personal options.
2 Press 4 to access personal preferences.
3 Press 1 to modify password.
4 Enter your new password. It must be 4 to 7 digits
long.
Note: It is important that you choose a number
that is easy for you to remember, but hard
for someone else to guess. Passwords
using all the same digits, for example
4,4,4,4 or a sequential series of digits,
1,2,3,4, will not be accepted.
5 Press ** to return to the main menu.
Note: If you forget your password, contact
Nextel Customer Care.
Recording Your Name
When you send, reply to, or copy a message, your
name response precedes the message. To record
or re-record your name at any time:
1 From the main voice mail menu, press 4 to
access personal options.
71
Nextel® Voice Mail
2 Press 4 to access personal preferences.
3 Press 3 to access the record your name
option.
4 Press 2 to record your name.
5 Press ** to return to the main menu.
Recording Your Active Greeting
You may want to include one or all of the following
options in your greeting so that callers will know
they are available.
• Press 1 to send a numeric message.
• Press 2 to send an operator-assisted message.
(This option is available only if you are a
subscriber of Operator Assisted Messaging.
Contact Nextel Customer Care for more
information.)
• Press # to skip the greeting and record a
message immediately.
To record or alter your greeting at any time:
1 From the main voice mail menu, press 3 to
change your greeting.
2 Press 1 to play, press 2 to record or
re-record, or press 7 to delete your active
greeting.
3 Record your greeting and press # when you
have finished.
72
4 Press ** to return to the main menu.
Advanced Voice Mail Features
Multiple Greetings
You can create up to five different greetings and
designate which greeting will be your active
greeting at any given time. The greeting that was
recorded during your initial voice mail box setup is
greeting 1. This is your default active greeting.
To record additional greetings:
1 From the main voice mail menu, press 3 to
access the greetings menu.
2 Press 4 to modify greetings.
3 Enter the greeting number you wish to create or
modify.
4 Press 2 to record a greeting.
5 Record your greeting and press # when you
have finished.
6 Press ** to return to the main menu.
To select your active greeting:
1 From the main voice mail menu, press 3 to
access the greetings menu.
2 Press 3 to select another greeting to be active.
Advanced Voice Mail Features
3 Enter the number of the greeting that you would
like to be active. The system will confirm your
active greeting number.
4 Press 1 to play your active greeting.
5 Press ** to return to the main menu.
Greetings Schedule
You can choose to have your greetings
automatically activated based on a pre-determined
time schedule. By activating the Greeting
Schedule, Greetings 1, 2, and 3 will automatically
play according to the time schedule listed below.
Greeting 1 Evenings and 5:00 pm – 7:59 am,
Weekends
Monday – Friday
24-hours, Saturday
and Sunday
Greeting 2 Weekday
Mornings
8:00 am – 11:59 am
Monday – Friday
Greeting 3 Weekday
Afternoons
Noon – 4:59 pm
Monday – Friday
To activate the greeting schedule:
1 From the main voice mail menu, press 3 to
access the greetings menu.
2 Press 9 to activate your greeting schedule.
3 Press ** to return to the main menu.
Note: The greeting schedule, when on, will
override any other greeting that you may
set as active. If a greeting is not recorded,
a system standard greeting will be played.
Automatic Playback
By default, the playback mode of your voice mail
service is set to normal. This feature automatically
plays and saves new messages when you log in.
To activate automatic playback:
1 From the main voice mail menu, press 4 to
access personal options.
2 Press 4 to access personal preferences.
3 Press 2 to access playback preferences.
4 Press 2 to switch between automatic and
normal playback.
5 Press ** to return to the main menu.
Changing the Playback Order of Messages
You can select the order in which you want
unheard messages to be played. You may listen to
the last received message first, or you may listen to
the first received message first. To select the order
in which new messages should be played:
1 From the main voice mail menu, press 4 to
access personal options.
2 Press 4 to access personal preferences.
73
Nextel® Voice Mail
3 Press 2 to access playback preferences.
4 Press 1 to switch between the playback
orders.
5 Press ** to return to the main menu.
6 Press ** to return to the main menu.
Note: You can only send messages using this
method to Nextel customers in your home
market.
Recording, Forwarding, and Replying to
Messages
Delivery Options
These functions allow you to record and send,
reply to, or forward a message to an assigned
destination address or group list number. If you
record a complete or partial message, but do not
send it, Nextel Voice Mail service will refer to this
message as an “in preparation” message.
To record and send a message:
1 From the main voice mail menu, press 2 to
record a message.
2 Record your message and press # to end the
message.
3 Press 9 at the prompt to indicate that you want
to send the message or press 5 for delivery
options.
4 Enter the mail box number and/or group list
number(s). (A mail box number is the 10-digit
Nextel PTN of a Nextel customer. The Nextel
customer must be in your local calling area. The
name of the recipient plays if it is recorded.)
5 Press # to send.
74
After you have created a message, you can assign
the message to a category before you send it.
Below is a list of the options that can be applied to
a message:
• Urgent — Recipient will hear this message
before other messages.
• Private — Recipient cannot copy the message
to another mail box or phone number.
• Notification of Non-Delivery — You will be
notified if the recipient has not listened to your
message by a certain date and time.
• Future Delivery — You can specify a time and
date (up to three months in advance) for the
message to be delivered.
Note: All dates must have digits in the MM/DD
format (2 digits for the month and 2 digits
for the date). For example, January 2nd
would be 0102.
Important: Once a message has been sent for
future delivery, it cannot be retrieved or
deleted.
Advanced Voice Mail Features
To set a special delivery option:
Working With Group Lists
1 After recording your message, but before
sending it, press 5 for delivery options.
2 Press the number that corresponds with the
desired delivery option:
• Press 1 for urgent.
• Press 2 for private.
• Press 3 for notification of non-delivery. At
prompt, specify time and date.
• Press 4 for future delivery of messages. At
prompt, specify time and date.
• Press 9 to send the message immediately.
3 The list of options will be presented again.
Select an additional option or press 9 to send
the message.
4 Enter the destination mail box or group list
number of the recipient(s).
5 Press # to send.
6 Press ** to return to the main menu.
This feature enables you to create a list and assign
it a unique name. Then, you can add mail box
numbers, group lists, or individuals. Once you
create a list you can send a voice message to
everyone on the list by entering the group list
number. You can have up to 40 group lists. Each
list can hold up to 50 addresses.
To set up a group list:
1 From the main voice mail menu, press 4 to
access personal options.
2 Press 2 to access your Group Lists.
3 Press 2 to create a Group List.
4 Enter the 1- or 2-digit group list number and
press #.
5 Record a name for the list and press #.
6 Select group members by mail box number,
group list, or name.
7 Press # to save all entries added to the list.
8 Press ** to return to the main menu.
To modify a group list:
1 From the main voice mail menu, press 4 to
access personal options.
2 Press 2 to access group lists.
75
Nextel® Voice Mail
3 Press 4 to modify a group list. Enter the
number of the group list you want to modify.
4 Press 1 to add a new recipient.
5 Press # to save your changes.
6 Press ** to return to the main menu.
Deleting a group list:
1 From the main voice mail menu, press 4 to
access personal options.
2 Press 2 to access group lists.
3 Press 3 to delete a group list.
4 Enter the number of the group list you want to
delete. The system will play the name of the
group list.
5 Press # to delete the list.
6 Press ** to return to the main menu.
Message Forwarding
Note: You can only forward messages to Nextel
customers in your home market.
This feature allows you to program your phone to
automatically forward incoming messages to
another mail box. There are two types of
forwarding: notified and silent. Notified forwarding
prompts the caller that the message will be
forwarded. Silent forwarding does not prompt the
caller that the message will be forwarded.
76
To modify forwarding options:
1 From the main voice mail menu, press 4 to
access personal options.
2 Press 5 to modify forwarding options.
3 Select the applicable option below:
• To create a forwarding number, press 2.
• If you have already created a forwarding
number, press 2 to modify the number.
• To enable or disable message forwarding,
press 3.
• To change the forwarding type, press 2.
4 Press ** to return to the main menu.
Nextel® Voice Mail Tree
Nextel® Voice Mail Tree
Nextel® Voice Mail Tree
Main Menu
1
Play
Messages
2
Record
Messages
Change
Greetings
Personal
Options
Retrieve
Deleted Msgs
Unheard
Messages
3
4
*3
11
00
Play
Messages
Change
Greetings
Nextel
Customer
Care
*
**
*3
0
2
Record Active
Greeting
Select Active
Greeting
Edit
Greetings
3
Global
Commands
Previous
Menu
Main
Menu
Undelete
Messages
Additional
Info (Help)
1
Play Active
Greeting
Personal
Options
2
4
5
Access
Group Lists
Personal
Preferences
Forwarding
Options
Personal
Preferences
1
2
3
Change
Password
Playback
Preferences
Name
4
5
7
8
98
Skip Toggle
Delete Active
Greeting
Review
Schedule
Activate
Schedule
1
11
2
3
33
55
6
7
8
9
#
Backup
Replay
Message
Pause/
Continue
Fast Forward
Forward to
End
Play Date
and Time
Forward
Message
Delete
Message
Reply to
Message
Save
Message
New Message/
Keep as New
77
SMS and Two-Way
Messages
Receiving a Message
SMS Messages
To view the message:
When you receive a text and numeric message,
New Text Message appears on the display.
Short Message Service (SMS) messages are short
text messages, also called text and numeric
messages. You can send SMS messages through
any email account or on www.nextel.com.
1 Press A under Read.
2 If the message fills more than one screen, scroll
to read it.
3 To keep the message, press A under Save. -or-
Your phone receives SMS messages sent to its
SMS address, but does not send SMS messages.
To delete the message, scroll to the end of the
message and press A under Delete.
Your phone's SMS address is your
PTN@page.nextel.com.
If your phone is powered off when you receive a
message, your phone notifies you the next time
you power it on. If you are out of your coverage
area, your phone alerts you when you return to
your coverage area.
Your phone attempts to deliver these messages for
up to 7 days.
To dismiss the message notification:
Press A under Back. This icon w appears on
the display, reminding you that you have a new
message.
Reading from the Message Center
1
2
3
4
From the main menu, select Messages > SMS.
Scroll to the message you want to read.
Press A under Read.
If the message fills more than one screen, scroll
to read it.
5 To keep the message, press A under Save. -orTo delete the message, scroll to the end of the
message and press A under Delete.
78
Two-Way Messages and Net Alerts
Calling and Storing Numbers
If an SMS message you receive contains a phone
number, you can call that number by pressing s
while viewing the message.
If an SMS message you receive contains a phone
number, Direct Connect number, Talkgroup
number, or a Scangroup number, you can call or
send a call alert to that number, or store that
number to Contacts. Press m while viewing the
message to access these options.
To call the number, select Call Back.
To send a call alert, select Alert, then press the
PTT button.
To store the number to Contacts, select Store
Number.
Two-Way Messages and Net
Alerts
Two-Way messages can be sent and received
through any email account and on
www.nextel.com. Your phone sends and receives
Two-Way messages through Nextel Online
services.
Your phone's Two-Way Messaging address is your
PTN@messaging.nextel.com.
When you receive a Two-Way message, your
phone notifies you with a Net alert. Each Net alert
lets you view the Two-Way message associated
with it.
Net alerts appear in the message center. Two-Way
messages appear in the Nextel Online services
browser.
Receiving a Message
When you receive a Two-Way message, a Net
alert notification appears on the display.
To view the message:
Press A under Goto.
This lets you read the message through Nextel
Online services.
To dismiss the Net alert notification:
Press A under Back. This icon w appears on
the display, reminding you that you have a new
Net alert.
Accessing Two-Way Messages
From Nextel Online Services
1 From the main menu, select Net > Text
Messaging > Read Messages > Message
Inbox.
79
SMS and Two-Way Messages
2 Select the message you want to view.
Sending Two-Way Messages
From the Message Center
To send a Two-Way message from your phone:
1 From the main menu, select Messages > Net
Alert.
2 Press A under Goto.
1 From the main menu, select Net > Text
Messaging > Send Message.
2 If you are sending the message to a new
address, select New Address. -or-
This takes you to your Message Inbox and lets
you read messages through Nextel Online
services.
3 Select the message you want to view.
Deleting Net Alerts
When you delete a Net alert, the Two-Way
message is not deleted, but it is no longer
accessible through the message center. You can
still access the message through Nextel Online
services.
1 From the main menu, select Messages.
2 With Net Alert highlighted, press A under
Goto.
3 Press m.
4 Select Delete.
5 Press A under Yes to confirm.
80
If you are sending the message to an address
you already sent a message to, select Sent
Address.
To send a message to a new address:
1 Enter the phone number or email address of the
person you are sending the message to.
Note: Use the right option key to switch between
text entry modes.
2 Press A under Ok.
3 Select Compose New to compose and send a
new message. -orSelect Sent to send a previously sent message.
Scroll to the sent message you want to send and
press A under Ok.
4 Press A under Send.
Two-Way Messages and Net Alerts
To send a message to a sent address:
1 Scroll to the phone number or email address you
want to send the message to and press A
under Ok.
2 Select Compose New to compose and send a
new message. -orSelect Sent to send a previously sent message.
Scroll to the sent message you want to send and
press A under Ok.
3 Press A under Send.
81
Nextel Online® Services
You can use your phone’s Net feature to access a
suite of wireless data products known as Nextel
Online (NOL) services. Services include Two-Way
Messaging, Web and Premium Web, Address
Book, Mobile Email, and wireless access to AOL®
Instant Messenger TM.
With the exception of the Two-Way Messaging
Express service, Nextel Online* services require
the activation of a Nextel Online service plan. To
order, call 1-800-NEXTEL6 or contact your Nextel
sales representative.
* Nextel Online is available in the continental U.S., Canada,
Mexico, Brazil, Argentina, and Peru. Nextel Online usage outside
of the continental U.S. may incur additional charges. See
www.nextel.com for details.
NOL Services
• Two-Way Messaging — Discretely send and
receive text messages via your Nextel phone,
any email address, or www.nextel.com with
Two-Way Messaging. For customers who
purchased a Free Incoming plan, there is a
nominal charge for each message sent and
received. Or, customers have the option of
subscribing to a Two-Way Messaging Premier
package for enhanced functionality and
unlimited messaging.
82
• Web — access the wireless Internet from your
Nextel phone.
• Premium Web — access any site on the
wireless Internet, conduct topic and keyword
searches, bookmark sites and applications, and
customize your phone's browser menu.
• Address Book — program your Contacts from
the Internet.
• Mobile Email — access and send email from
your Nextel phone.
• AOL® Instant Messenger TM — send and receive
instant messages in real–time through a
handset-based interface.
Accessing NOL Services
From Your Phone
You must first enable security on your phone to
receive NOL services. See “Enabling Security” on
page 7.
1 Press m to access the main menu and select
Net.
Your NOL home page displays.
2 Choose the service you want to access.
To access your Two-Way Messaging Service:
Accessing NOL Services From Your Phone
Select the Text Messaging application from the
Net menu.
To access the Web:
Select Web Sites, Downloads, Marketplace, or
Search
To access Address Book:
Select Business Tools > Address Book
To access Mobile Email:
Select Email and More > Mobile Email
To access AOL® Instant MessengerTM:
Select Email and More > AIM
Note: Many screens will require you to enter
text. For information on entering text, see
“Entering Text” on page 36.
Navigation Keys
• Home — Press e to return to your home page.
Tip: Press e twice to return to your phone's idle
screen.
Tip: While navigating through Nextel Online
screens, a number may appear to the left of
the application or topic you want to access.
Press the corresponding number on the
keypad for quicker access to that
application or topic.
When transmitting highly personal or sensitive
data, such as a credit card number, this icon E
appears, indicating that the data is encrypted
during transmission.
Note: You may be asked to (re)enable security
as Nextel adds new services or upon your
return to the U.S. after traveling.
Quick Start Guides for NOL services can be
accessed on www.nextel.com under the Customer
Support tab by clicking on Guides &
Tutorials/Services. NOL Demos can be
accessed on www.nextel.com under the Services
tab by clicking on Nextel Online/Web Services
Demo.
• Back — Press * to return to a previous
screen.
83
Voice Records
A voice record is a recording you make with your
phone and can play back. You can record notes to
yourself or phone calls.
Your phone can store up to 20 voice records.
Creating Voice Records
To record a note to yourself:
1 From the main menu, select VoiceRecord.
2 With [New VoiceRec] highlighted, press A
under Record.
3 Say the message you want to record into the
microphone.
Tip: To stop recording before you are finished,
press m, then select Pause. To start
recording again, press A under Resume.
To stop recording and discard the voice
record at any time, press A under Cancel.
4 When you are finished recording, press A
under Stop.
To add to the end of voice record:
1 From the main menu, select VoiceRecord.
2 Scroll to the voice record you want to add to.
3 Press m.
84
4 Select Add To.
5 When you are finished recording, press A
under Stop.
To record a phone call:
1 While on an active call, press m.
2 Select Record.
3 When you are finished recording, press A
under Stop.
Note: Recording of phone calls is subject to
applicable laws regarding privacy and
recording of phone conversations.
Playing Voice Records
1
2
3
4
From the main menu, select VoiceRecord.
Scroll to the voice record you want to play.
Press A under Play.
To stop the voice record while it is playing, press
A under Back.
Tip: To fast forward, scroll right. To rewind, scroll
left. To pause or resume, press any number
key.
Labeling Voice Records
Labeling Voice Records
When you create a voice record, it is labeled with
the time and date it was recorded. You can then
rename it with a custom label.
1
2
3
4
From the main menu, select VoiceRecord.
Scroll to the voice record you want to label.
Press m. Select Label.
Enter the label you want to assign. See
“Entering Text” on page 36.
5 Press A under Ok.
Deleting Voice Records
To delete a voice record:
1 From the main menu, select VoiceRecord.
2 Scroll to the unlocked voice record you want to
delete.
3 Press m.
4 Select Delete.
5 Press A under Yes to confirm.
To delete all voice records:
1 From the main menu, select VoiceRecord.
2 Scroll to any voice record.
3 Press m.
4 Select Delete All.
5 Press A under Yes to confirm.
Locking Voice Records
When you lock a message, it cannot be deleted
until you unlock it.
1 From the main menu, select VoiceRecord.
2 Scroll to the message you want to lock or
unlock.
3 Press m.
4 Select Lock to lock the message. -orSelect Unlock to unlock the message.
When a voice record is locked, this icon l
appears next to it.
Managing Memory
To view the amount of memory available for voice
records:
1 From the main menu, select VoiceRecord.
2 With [New VoiceRec] highlighted, press m.
Select Memory. -orWith any voice record highlighted, press m.
Select Memory.
85
Voice Records
To free more memory by deleting all unlocked
voice records:
1 From the voice records memory screen, press
A under Delete.
2 Press A under Yes to confirm.
Note: Voice records are stored in your phone
using the same memory space used to
store messages, Java application data,
and ring tones. Deleting some of these
other items frees memory for voice
records.
86
Java Applications
Running Applications
Your phone arrives with Java applications loaded
and ready to install. You can download and install
more Java applications.
To run an application that has a shortcut on the
main menu:
To download and install more Java applications, go
to the Downloads menu option on your phone, or
visit www.nextel.com/downloads.
Note: Using Java applications may cause your
phone to use up more battery power than
other uses of your phone.
Installing Applications
1 From the main menu, select Java Apps.
2 Scroll to the application or suite of applications
you want to install.
3 Press A under Install.
Installation messages appear as the application
installs.
1 From the main menu, select the application or
suite of applications you want to run.
2 If you have selected a suite of applications,
select the application you want to run.
To run an application that does not have a shortcut
on the main menu:
1 From the main menu, select Java Apps.
2 Scroll to the application or suite of applications
you want to run and press A under Run.
3 If you have selected a suite of applications,
scroll to the application you want to run and
press A under Run.
Tip: If you don’t hear the sounds associated with
the Java application, select Settings >
Volume and check the volumes of Java
Speaker and Java Earpiece.
4 If you want to create a shortcut to the Java
application on the main menu: Press A under
Next. Press A under Yes. Press A under Add.
5 Press A under Done.
87
Java Applications
Suspending Applications
Ending Applications
When you suspend an application, it does not stop
running. It goes to the background so that you can
run another application in the foreground.
To end an application:
To suspend an application:
Press e.
To view your suspended applications:
From the Java menu, scroll to Suspended
Apps and press A under Open.
You can have up to 3 applications running at one
time — 1 running in the foreground and 2 in the
background.
Resuming Applications
You can resume a suspended application at any
time. This brings it to the foreground.
1 From the Java menu, scroll to Suspended
Apps and press A under Open.
2 Scroll to the application you want to resume and
press A under Open.
88
1 From the main menu, select Java Apps.
2 If the application you want to end is part of a
suite of applications, select the suite.
3 Scroll to the application you want to end.
4 Press m.
5 Select End.
Tip: You can also end applications from the
Suspended Apps screen.
To end all applications:
1
2
3
4
5
6
From the main menu, select Java Apps.
Scroll to Suspended Apps.
Press m.
Select End All.
Press A under Yes.
If you want to end all applications without letting
them exit, press A under EndNow.
Downloading Applications
Downloading Applications
Managing Memory
If you want to run more Java applications, you can
download them into your phone.
To view the amount of memory available for Java
applications:
Check the Downloads menu option on your phone
for a catalog of items available for purchase and
download.
1 From the main menu, select Java Apps > Java
System.
2 Press A under Next.
3 To see more memory information, press A
under Next again.
You can also go to www.nextel.com/downloads for
a selection of Java applications and downloading
instructions.
Deleting Applications
To delete an application:
1
2
3
4
5
6
From the main menu, select Java Apps.
Scroll to the application you want to delete.
Press m.
Select Deinstall.
Press A under Yes to confirm.
When your phone has finished deleting the
application, press A under Done.
To delete all Java applications:
1
2
3
4
5
From the main menu, select Java Apps.
Scroll to Java System.
Press m.
Select Delete All.
Press A under Yes to confirm.
Deleting Java applications frees memory.
Note: Java application data is stored in your
phone using the same memory used to
store voice records, and ring tones.
Deleting some of these other items frees
memory for Java applications.
Shortcuts on the Main Menu
When you install an application, you can create a
shortcut to the application on the main menu.
To create a shortcut to an application that is
already installed:
1 From the main menu, select Settings >
Personalize > Menu Options > Add/Remove
Apps. -orFrom the main menu: Press m. Select Main
Menu Setup > Add/Remove Apps.
89
Java Applications
2 Scroll to view the list of Java applications. Any
application that has a shortcut on the main menu
has a checkmark next to it.
3 Scroll to the application you want to create a
shortcut for.
4 Press A under Add.
5 Press A under Done.
To remove a shortcut:
1 From the main menu, select Settings >
Personalize > Menu Options > Add/Remove
Apps. -orFrom the main menu: Press m. Select Main
Menu Setup > Add/Remove Apps.
2 Scroll to view the list of Java applications. Any
application that has a shortcut on the main menu
has a checkmark next to it.
3 Scroll to the application you want to remove the
shortcut for.
4 Press A under Remov.
5 Press A under Done.
90
Java Applications and GPS
Enabled
Some Java applications can make use of your
phone’s GPS feature to determine the approximate
geographical location of your phone. (See “GPS
Enabled” on page 93 for more information on the
GPS feature.) However, for privacy reasons, you
may not always want Java applications to access
the location of your phone. Your phone protects
your privacy by giving you the option to block all or
some Java applications from accessing the
location of your phone.
Setting Privacy for All Java
Applications
These options control the privacy of all Java
applications on your phone:
• Restricted — No Java or similar software
applications may access the location of your
phone. However, location information may still
be available to the phone’s owner, fleet
manager, or account administrator.
• Unrestricted — All Java applications may
access the location of your phone, without
notifying you.
Java Applications and GPS Enabled
• By Permission — When a Java application
attempts to access the location of your phone,
you are prompted to give permission. However,
location information may still be available to the
phone’s owner, fleet manager, or account
administrator.
See “Setting Privacy Options” on page 98 for
information on choosing these options.
Granting or Denying Permission
If you choose By Permission, you must grant or
deny each Java application access to the location
of your phone when the application requests
access for the first time. You may be required to
grant or deny subsequent requests from the same
application, depending on the privacy setting you
choose for the individual Java application (see
“Setting Privacy for Each Java Application”).
When a Java application requests access to the
location of your phone, a screen appears informing
you.
To deny this request:
1 Press A under Deny. The application does not
access the location of your phone.
2 Select the denying option you want:
• Always — If the application requests access
to the location of your phone again, the
request is denied without notifying you.
• For this session — If the application
requests access to the location of your phone
again before you power off your phone, the
request is denied without notifying you.
• Only Once — If the application requests
access to the location of your phone again,
you are prompted to grant or deny
permission.
To grant this request:
1 Press A under Grant. The application accesses
your phone’s location.
2 Select the granting option you want:
• Always — If the application requests access
to the location of your phone again, the
request is granted without notifying you.
• For this session — If the application
requests access to the location of your phone
again before you power off your phone, the
request is granted without notifying you.
• Only Once — If the application requests
access to the location of your phone again,
you are prompted to grant or deny
permission.
91
Java Applications
Setting Privacy for Each Java
Application
After a given Java application requests access to
the location of your phone for the first time, you
have the opportunity to set the GPS privacy option
for that Java application.
1 From the main menu, select Java Apps.
2 Scroll to the application or suite of applications
you want to set the privacy option for.
If the application has requested access to the
location of your phone,S appears when you
highlight the application.
3
4
5
6
Press m.
Select Privacy Settings.
Scroll to Location and press A under Change.
Select the privacy option you want for this
application:
• Always — The application always has
permission to access the location of your
phone, without notifying you.
• Ask — When the application requests access
to the location of your phone, you are
prompted to grant or deny permission (see
“Granting or Denying Permission” on page
91).
92
• Never — When the application requests
access to the location of your phone, the
request is denied without notifying you.
GPS Enabled
Your phone’s GPS Enabled feature uses
information from Global Positioning System (GPS)
satellites orbiting the Earth to determine the
approximate geographical location of your phone,
expressed as latitude and longitude. The
availability and accuracy of this location
information (and the amount of time that it takes to
calculate it) will vary depending on the environment
in which you are using the GPS feature. For
example, GPS location fixes are often difficult to
obtain indoors, in covered locations, between high
buildings, or in other situations where you have not
established a clear broad view of the sky. SEE:
“IMPORTANT: Things to Keep in Mind”.
When you make a 911 emergency call, the GPS
feature of your phone can help emergency
personnel locate you if your phone has adequate
access to GPS satellite signals and your
emergency response center is equipped to process
such information.
You can also use the GPS feature to view your
approximate location. Location information
appears on the phone’s display.
If your phone is connected to a laptop computer or
similar device, software running on that device can
request your location. To protect your privacy, you
can control whether these requests are granted.
IMPORTANT: Things to Keep
in Mind
If you are using the GPS feature of your phone
while driving, please give full attention to driving
and to the road.
Where adequate signals from multiple satellites
are not available (usually because your GPS
antenna cannot establish a view of a wide area of
open sky), the GPS feature of your phone WILL
NOT WORK. Such situations include but are
not limited to:
• In underground locations
• Inside of buildings, trains, or other covered
vehicles
• Under any other metal or concrete roof or
structure
• Between tall buildings or under dense
tree-cover
• Near a powerful radio or television tower
93
GPS Enabled
• When your GPS antenna is covered (for
example, by your hand or other object) or
facing the ground
• In temperature extremes outside the
operating limits of your phone
Walking or driving very slowly may also
substantially reduce GPS performance.
Even where location information can be
calculated in such situations, it may take much
longer to do so, and your location estimate may
not be as accurate. Therefore, in any 911 call,
always report the location to the emergency
response center if you can and if you cannot,
remain on your phone for as long as the
emergency response center instructs you.
Even where adequate signals from multiple
satellites are available, your GPS feature will
only provide an approximate location, often
within 150 feet (45 meters) but sometimes
much further from your actual location. Advice
on how to improve GPS performance is
provided in “Enhancing GPS Performance” on
page 96.
While the GPS feature of your phone can be a
valuable navigational aid, it does not replace the
need for careful navigating and good judgment.
Never rely solely on one device for navigation.
Remember that the accuracy of the location
94
information and the time needed to obtain it will
vary depending on circumstances, particularly the
ability to receive signals from adequate numbers of
satellites.
On emergency calls, your phone uses assistance
information from the phone network to improve the
speed and accuracy of your phone’s location
calculation: if such assistance information
becomes unavailable, it may reduce the speed and
accuracy of the location calculation.
The satellites used by the GPS feature of your
phone are controlled by the U.S. government and
are subject to changes implemented in accordance
with the Department of Defense GPS user policy
and the Federal Radionavigation Plan. These
changes may affect the performance of the GPS
feature of your phone.
Making an Emergency Call
Dial 911 to be connected to an emergency
response center. If you are on an active call, you
must end it before calling 911.
When you make an emergency 911 call, the GPS
feature of your phone begins to seek information to
calculate your approximate location. It will take
the GPS feature of your phone some time to
determine your approximate location. Even
where your phone has good access to sufficient
Viewing Your Approximate Location
GPS satellite signals and network assist data, it
may take 30 seconds or more to determine the
approximate location. This time will increase where
there is reduced access to satellite signals. When
your approximate location is determined, it is made
available to the appropriate emergency response
center.
In some cases, your local 911 emergency
response center may not be equipped to
receive GPS location information. For this
reason, and because the GPS location information
reported is only approximate or may not be
available in your location (see “IMPORTANT:
Things to Keep in Mind” on page 93), always
report your location to the 911 operator you
speak to when making an emergency call, if able,
just as you would when using a phone without GPS
capabilities.
Note: If you are concerned about whether your
local 911 emergency response center is
equipped to receive GPS location
information, contact your local authorities.
In general, if your phone has access to signals
from more GPS satellites, your location will be
determined faster and more accurately than if your
phone has access to signals from fewer GPS
satellites.
If your phone does not have adequate access to
GPS satellites signals, the location of the nearest
cell tower in contact with your phone is
automatically made available to the emergency
response center, if the center has the capability to
receive such information.
See “Enhancing GPS Performance” on page 96 for
information on how to help your phone determine
your location.
Viewing Your Approximate
Location
1 From the main menu, select GPS > Position.
2 Scroll to view the entire screen.
This displays the following information about the
last time your location was calculated:
• The time (as Greenwich Mean Time) and date
that the location was last calculated.
• The approximate location, expressed as latitude
and longitude.
• The estimated accuracy of the calculated
location. This estimate of accuracy is only a very
rough estimate and may vary substantially from
the actual accuracy of the approximate location
information reported.
95
GPS Enabled
• The number of satellites used to calculate the
location. In general, more satellites make for
better accuracy.
To calculate your location again:
Press A under Rfrsh.
It may take your phone several minutes to
complete the process of determining your location.
During this time, a message usually appears on
your phone’s display saying your phone is
scanning for satellites. For tips on getting the best
location calculation, see “Enhancing GPS
Performance”.
The Position screen displays the updated
information.
To cancel a location calculation before it is
completed:
Press A under Cancel to return to the Position
screen. -orPress e to return to the idle screen.
Each time approximate location of your phone is
calculated, the latest location information is stored
in your phone and remains there even when your
phone is powered off. You will see this information
the next time you view the Position screen.
96
If you received a phone call or alert while
attempting to determine your location, the Position
screen will disappear, but your phone will continue
attempting to determine its location. If it is
successful, the new location information will be
displayed the next time you view the Position
screen.
Enhancing GPS Performance
Sometimes the GPS feature of your phone may be
unable to complete a location calculation
successfully. If this happens when you are making
an emergency call, the location of the nearest cell
tower in contact with your phone is made available
to the appropriate emergency response center if
the center has the capability to receive such
information. If this happens when you are trying to
view your location on the phone’s display, you will
see a message indicating that your phone cannot
access satellites.
Enhancing GPS Performance
To improve accuracy and increase your chances of
a successful calculation, do the following while
your phone is determining your approximate
location:
• Stay in the open. The GPS feature works best
where there is nothing between your phone and
a large amount of open sky. If possible, go
outside, away from tall buildings and foliage.
While performance in a building is improved by
moving closer to windows, glass with certain sun
shielding films may block satellite signals.
• Hold your phone to enhance reception. Signals
from GPS satellites are transmitted to your GPS
antenna, which is inside the back of your phone,
opposite the earpiece, above the label with your
service provider’s name on it. Hold your phone
away from your body, giving the antenna clear
access to satellite signals. Do not cover the
antenna area with your fingers or anything else.
• Stand still. If possible, stand still until your phone
is finished determining your location. Moving
your phone at a walking pace while your phone
is calculating your approximate location may
substantially decrease GPS performance.
• In a car. When using the GPS Enabled feature in
a car, position your phone so that the GPS
antenna has good access to GPS signals
through the car’s windows. Typically, the GPS
antenna has best access to GPS signals in a car
when placed near a window.
Note: Although moving your phone at a walking
pace decreases GPS performance,
moving it at the speed of a moving car
does not.
• Stay in network coverage. The network will
provide your phone with information that helps
determine your location more quickly and
accurately.
GPS antenna area
97
GPS Enabled
Updating Satellite Almanac
Data
Another way to keep the GPS feature of your
phone working well is to keep your satellite
almanac data up to date.
The United States government maintains an
almanac of data about where GPS satellites are as
they orbit the Earth. This information is available to
your phone. Keeping your satellite almanac up to
date helps your phone determine your location
more quickly.
The almanac contains information about the
location of satellites, their operational status, and
other satellite information. Keeping this information
updated enhances the performance of your GPS
feature. In most cases, your phone will be able to
get a fix in strong satellite signal conditions with
outdated almanac data, but it may take longer.
Note: When you make an emergency call, your
phone does not rely upon the almanac to
determine your location.
If your satellite almanac data is out of date, your
phone may prompt you to update it. Follow the
instructions that appear on the phone’s display.
You may be asked to go to a web site or call a
customer care number.
98
Setting Privacy Options
Your phone’s GPS privacy options control whether
software applications may view the location of your
phone.You may set your phone to one of these
GPS privacy options:
• Restricted — No software applications may
view the location of your phone. However,
location information may still be available to the
phone’s owner, fleet manager, or account
administrator.
• Unrestricted — All applications may view the
location of your phone, without notifying you.
• By Permission — When an application
attempts to view the location of your phone, you
will be prompted to give permission. However,
location information may still be available to the
phone’s owner, fleet manager, or account
administrator.
Note: Privacy options do not apply to the
transmission of location information
during emergency 911 calls.
To set your GPS privacy options:
1 From the main menu, select GPS > Privacy.
2 If your GPS PIN security feature is enabled,
enter your GPS PIN. (See “Setting the GPS PIN
Security Feature” for more information.)
Using GPS with Map Software
3 Scroll to the privacy setting you want.
4 Press A under Select.
Setting the GPS PIN Security Feature
To prevent your GPS privacy settings from being
altered without your knowledge, your GPS privacy
option can be protected by a PIN.
When you receive your phone, the GPS security
feature is turned off, so you do not have to enter a
GPS PIN to access your GPS privacy options. If
you turn this feature on, you will be required to
enter a GPS PIN to access your GPS privacy
options.
To turn the GPS Enabled security feature on or off:
1 From the main menu, select Settings >
Security > GPS PIN.
2 Scroll to On or Off.
3 Press A under Select.
4 Enter the current GPS PIN.
Note: When you receive your phone, your GPS
PIN is 0000.
5 Press A under Ok.
To change your GPS PIN:
1 From the main menu, select Settings >
Security > Change Password > GPS PIN.
2 Enter the current GPS PIN.
Note: When you receive your phone, your GPS
PIN is 0000.
3
4
5
6
7
Press A under Ok.
Enter the new 4- to 8-digit GPS PIN.
Press A under Ok.
Enter the new 4- to 8-digit GPS PIN to confirm.
Press A under Ok.
Using GPS with Map Software
You can use the GPS feature of your phone to
provide approximate location data to a laptop
computer or similar device that is running
interactive map software such as that made by
DeLorme or Microsoft. This way, if your phone has
good access to GPS signals, your approximate
position on a map can be made available as you
travel in a vehicle.
To do this, connect your phone to your laptop (or
other device) with a data cable and set your phone
to transmit data (see “Getting Started” on page
100). Your phone then provides your approximate
location to the device running the map software,
which displays your location on a map. Your phone
provides an updated location every second and the
map software displays your changing location on
its map.
99
GPS Enabled
See “Enhancing GPS Performance” on page 96 for
more details on obtaining good location
information.
connector
cover
Note: Because your phone is continuously
determining your location, using the GPS
feature of your phone with map software
uses the phone’s battery power quickly.
Software Compatibility
Your phone sends location information to your
laptop or other device using the standard National
Marine Electronics Association (NMEA) format.
Your phone supports output messages in
NMEA-0183 format and supports the following
NMEA-0183 sentences: GGA, GLL, GSA, GSV,
RMC, and VTG.
2 With the phone’s display facing up, insert the
data cable’s connector into the accessory
connector, until you hear a click.
The map software running on your laptop or other
device must support NMEA 3.0.
Getting Started
To connect your phone to your laptop or other
device:
1 Open the connector cover.
3 Insert the data plug into the COM port of your
laptop or other device.
Make sure no other application is using the COM
port selected.
100
Using GPS with Map Software
Make sure the COM port settings of your laptop or
other device are set to the following:
•
•
•
•
•
Bits per second: 4800
Data bits: 8
Parity: None
Stop bits: 1
Flow control: Hardware
To set your phone to send location information to
your laptop or other device:
1 From the main menu, select GPS > Interface.
2 With NMEA OUT highlighted, press A under
Change.
3 Scroll to On.
4 Press A under Select. Your phone is now
sending location data to your laptop or other
device.
To stop your phone from sending location data to
your laptop or other device:
Set NMEA OUT to Off.
Each time you power your phone on, NMEA OUT
is automatically set to Off.
101
Customizing Your Phone
volume of the phone’s ring when you get a call
on that line.
Setting the Volume
See “Volume Features” on page 104.
To set the volume of the sound coming from the
phone’s earpiece or speaker:
Setting Your Phone to Not
Ring
1 From the main menu, select Settings > Volume.
2 Scroll to Earpiece to set the earpiece volume.
-orScroll to Speaker to set the speaker volume.
3 Press A under Change.
4 To select the volume:
Scroll left or right. -orPress the volume controls.
5 Press A under Ok.
To set the volume of the phone’s ring:
Press the volume controls.
For another way to set the volume of the phone’s
ring, or the volume of many other sounds your
phone makes:
1 From the main menu, select Settings > Volume.
2 Scroll to the option you want and make the
change. Choose Line 1 or Line 2 to set the
102
To set your phone to make no sound when you
receive phone calls, Direct Connect calls, Group
Connect calls, message notifications, and call
alerts, see “Setting Your Phone to Vibrate” on page
63.
To set your phone to vibrate instead of making a
sound when you receive Direct Connect calls and
Group Connect calls, even if you want your phone
to ring for other features:
1 From the main menu, select Settings > DC/GC
Options > Alert Type.
Tip: If Alert Type does not appear: From the
main menu, select Ring Tones. Make sure
Vibrate All is set to Off. Repeat step 1.
2 Press A under Change.
3 Scroll to Vibrate.
4 Press A under Select.
Seeing the Display Better
Seeing the Display Better
To set the contrast of the display:
1 From the main menu, select Settings >
Display/Info > Contrast.
2 Press A under Change.
3 Scroll left or right to set the contrast.
4 Press A under Ok.
Using Settings
Settings contains many submenus that let you
customize your phone.
Display/Info Features
The Display/Info menu controls how the keypad
and display appear:
• Palette — changes the color scheme of the
display.
• Backlight — controls how long the backlight
stays on after you make or receive a call.
• Clock — controls whether the time and date
appears on the idle screen, sets the format of
the time and date, and sets the year.
• Contrast — sets the contrast on the display.
See “Seeing the Display Better”.
• Language — sets the language that your phone
displays.
Phone Calls Features
The Phone Calls menu controls how your phone
handles phone calls:
• Set Line — sets phone line 1 or phone line 2 as
the active line for outgoing calls.
• Any Key Ans — If this feature is on, you can
answer calls by pressing any number key on the
keypad.
• Auto Redial — sets your phone to automatically
redial calls you make when the system is busy.
• Call Waiting — See “Call Waiting” on page 50.
• Auto Ans — sets your phone to automatically
answer an incoming call after a specified
number of rings. When this feature is on, the
phone answers by connecting you to the caller;
it does not send the call to voice mail, unless
you are out of coverage or on the line.
• Minute Beep — causes a beep to sound every
minute of an active call.
• Call Duration — causes the duration of a call to
appear on the phone’s display when the call
ends.
• TTY — lets you use your phone with a TTY
device. See “Making TTY Calls” on page 59.
103
Customizing Your Phone
• Notifications — See “Message Notifications” on
page 67.
DC/GC Options Features
The DC/GC Options menu controls how your
phone handles Direct Connect calls and Group
Connect calls:
• Scan — controls whether your phone receives
Group Connect calls from all the Talkgroups in a
Scangroup. See “Setting Talkgroup Scan” on
page 55.
• Tkgrp Silent — controls whether you hear
Group Connect calls to your Talkgroup or
Scangroup. See “Turning off Group ConnectTM
Calls” on page 55.
• Tkgrp Area — lets you define your Talkgroup or
Scangroup area.
• One Touch DC — See “Setting One Touch
Direct Connect®” on page 52.
• Alert Type — controls how your phone notifies
you when you receive Direct Connect calls and
Group Connect calls. See “Setting Your Phone
to Not Ring” on page 102.
104
Personalize Features
The Personalize menu makes main menu items
easier to access.
• Menu Options — Reorder Menu lets you
change the order of the items on the main menu
by grabbing and moving them; Add/Remove
Apps lets you create a shortcut to a Java
application on the main menu.
• Left Sftkey — sets the main menu item you
access when you press the left option key from
the idle screen.
• Right Sftkey — sets the main menu item you
access when you press the right option key from
the idle screen.
• Power Up — sets the main menu item you see
when you power on your phone. To set the idle
screen to be the first thing you see when you
power on your phone, select Default Ready.
Volume Features
The Volume menu sets the volume of sounds your
phone makes:
• Line 1 — sets ring volume for phone line 1.
• Line 2 — sets ring volume for phone line 2.
• Messages — sets the volume of message
notifications.
Using Settings
• Earpiece — sets the volume of sound coming
out of the earpiece.
• Speaker — sets the volume of sound coming
out of the speaker.
• Keypad — sets the volume of sound associated
with pressing keys and buttons.
• Java Earpiece — sets the volume of sound
associated with Java applications coming out of
the earpiece.
• Java Speaker — sets the volume of sound
associated with Java applications coming out of
the speaker.
• Data — sets the volume of sounds that notify
you that you are receiving a circuit data call.
Security Features
The Security menu lets you turn security features
on and off and change passwords:
• Phone Lock — turns on a feature that locks
your phone, either immediately or automatically
after a set period of inactivity. An unlock code is
required to enable this feature, to unlock the
phone, and to set a new unlock code. Contact
Nextel Customer Care for your default unlock
code.
• Keypad Lock — locks the phone’s keypad,
either immediately or automatically after a set
period of inactivity. See “Locking the Keypad” on
page 16 for more information on locking and
unlocking the keypad.
• SIM PIN — enables and disables your phone’s
SIM PIN security feature. See “Turning the PIN
Requirement On and Off” on page 13.
• GPS PIN — enables and disables your phone’s
GPS PIN security feature. See “Setting the GPS
PIN Security Feature” on page 99.
• Change Passwords — changes your phone
unlock code, security code, SIM PIN, and GPS
PIN.
Advanced Features
The Advanced menu contains advanced and rarely
used Settings features.
• Alert Timeout — controls the amount of time a
tone continues to sound when you receive a
message notification or call alert.
• Headset/Spker — sets headset option. See
“Using a Headset” on page 114.
105
Customizing Your Phone
• Connectivity — Network ID sets the phone’s
network IDs and their roaming options under the
direction of Nextel Customer Care; Master
Reset lets Nextel Customer Care reset your
service in the event of a security or provisioning
problem.
• Reset Defaults — Reset Settings returns all
settings to their original defaults; Reset All
returns all settings to their original defaults and
erases all stored lists. Use only under the
direction of Nextel Customer Care.
• Return to Home — controls how long the recent
calls list displays after calls.
• Baud Rate — sets the baud rate at which your
phone communicates with a laptop computer,
PC, or similar device.
106
Profiles
Viewing Profiles
A profile is a group of settings saved together so
that you can apply them to your phone easily.
To view the profiles stored in your phone:
A profile contains these settings:
• Ring Tones — sets all options described in
“Ring Tones” on page 63, except assigning ring
tones to Contacts.
• Display/Info — sets Color Palette and
Backlight options. See “Display/Info Features”
on page 103.
• Phone Calls — sets Set Line and Auto Ans
options. See “Phone Calls Features” on page
103.
• Volume — sets all options described in “Volume
Features” on page 104.
• Call Filter — controls which calls, call alerts,
and message notifications your phone responds
to. See “Setting Call Filtering” on page 110.
• Advanced — sets headset option. See “Using a
Headset” on page 114.
1 From the main menu, select Profiles.
2 Scroll to the profile you want to view.
Tip: The profile that is currently in effect on your
phone has a checkmark next to it.
3 Press m.
4 Select View.
5 Scroll to view settings.
Switching Profiles
To apply a profile to your phone:
1 From the main menu, select Profiles.
2 Scroll to the profile you want to apply.
3 Press A under Select.
The profile you selected is now in effect.
Your phone arrives with pre-set profiles. You can
also create your own profiles.
107
Profiles
Surveillance Profile
• Creates a temporary profile that contains these
changes
During Surveillance profile the following features
will be disabled:
To set your phone to create a temporary profile
that contains changes you make to settings:
•
•
•
•
•
1
2
3
4
5
screen backlight
keypad backlight
speaker audio
ringtones
all vibration
This setting is designed for public safety use with
an earbud or headset only.
Note: Earbuds and headsets are sold
separately. See “Accessories” on page
17.
How Changing Settings
Affects Profiles
Many of the settings contained in profiles can be
set without switching or editing profiles — for
example, by selecting Settings or Ring Tones to
set options, or by setting the volume of the phone’s
ring using the volume controls.
When you do this, your phone either:
• Updates the profile in effect to reflect these
changes, without notifying you -or108
From the main menu, select Profiles.
Press m.
Select Setup > Temp Profile.
Press A under Change.
Set this option to On.
To set your phone to update the profile in effect to
reflect any changes you make to settings:
Set Temp Profile to Off in step 5.
Note: You cannot change any of the settings in
the Surveillance profile.
Temporary Profiles
If your phone is set to create temporary profiles, a
temporary profile is created when you make
changes to settings without switching or editing
profiles.
A temporary profile is based on the profile in effect
when you made the changes, but reflects the
changed settings. Making more changes further
updates the temporary profile, for as long as it is in
effect.
Creating Profiles
A temporary profile stays in effect until you switch
profiles, power off your phone, or delete it (or the
profile it is based on) from the list of profiles.
If you do not store a temporary profile, it is deleted
when you switch profiles or power off your phone.
A temporary profile is automatically given the same
name as the profile it is based on, but with an
asterisk (*) in front of it.
When you view a temporary profile’s settings, the
options that differ from the profile it is based on
have an asterisk in front of them.
Storing a Temporary Profile
To store a temporary profile as a new profile:
1
2
3
4
5
From the main menu, select Profiles.
Scroll to the temporary profile.
Press m.
Select Store As New.
Enter the name you want to give the profile. See
“Entering Text” on page 36.
When you are finished, press A under OK.
To overwrite the profile the temporary profile is
based on:
1 From the main menu, select Profiles.
2 Scroll to the temporary profile.
3 Press m.
4 Select Store Changes.
The temporary profile is stored with the name of
the profile it is based on. The profile it is based on,
as it existed before you made changes to settings,
is gone.
Creating Profiles
1 From the main menu, select Profiles.
2 Select [New Profile]. -orScroll to any profile. Press m. Select New.
3 Enter the name you want to give the profile. See
“Entering Text” on page 36.
Tip: You can begin entering text from the keypad
instead of pressing A under Change.
When you are finished, press A under OK.
4 If you want to base this profile on an existing
profile: With Copy From highlighted, press A
under Change. Select the profile you want to
base this profile on. If you do not choose a
profile to copy from, the new profile is based on
a default profile.
5 Press A under Create.
6 Scroll through the list of options and set their
values.
109
Profiles
7 Press A under Done.
Editing Profiles
1
2
3
4
5
From the main menu, select Profiles.
Scroll to the profile you want to edit.
Press m.
Select Edit.
Scroll through the list of options and set their
values.
Note: You cannot edit the Surveillance profile.
Deleting Profiles
To delete a profile:
1 From the main menu, select Profiles.
2 Select the profile you want to delete.
Note: A temporary profile is automatically
deleted when the profile it is based on is
deleted.
3 Press m.
4 Select Delete.
5 Press A under Yes to confirm.
To delete all profiles:
1 From the main menu, select Profiles.
2 Press m.
110
3 Select Delete All.
4 Press A under Yes to confirm.
Setting Call Filtering
The call filtering setting in each profile lets you
control which calls, call alerts, and message
notifications your phone notifies you of, and which
it ignores.
To set call filtering:
1 While setting options for a profile, select Call
Filter.
2 To set filtering options for phone calls, scroll to
Phone and press A under Change.
• Off sets your phone to notify you of all phone
calls.
• All sets your phone to ignore all phone calls.
• All Contacts sets your phone to notify you
only of phone calls from numbers stored in
Contacts.
• Some Cntcs sets your phone to notify you
only of phone calls from numbers you select
from Contacts.
3 If you set the Phone option to Some Cntcs,
select up to 5 Contacts entries that contain
phone numbers you want to be notified of calls
from.
Setting Call Filtering
When you are finished, press A under Done.
4 To set filtering options for Direct Connect calls
and Group Connect calls, scroll to DC/GC and
press A under Change.
• Off sets your phone to notify you of all Direct
Connect calls and Group Connect calls.
• On sets your phone to ignore all Direct
Connect calls and Group Connect calls.
5 To set filtering options for call alerts, scroll to
Alerts and press A under Change.
• Off sets your phone to notify you of all call
alerts.
• On sets your phone to ignore all call alerts.
6 To set filtering options for message notifications,
scroll to Notifications and press A under
Change.
• Off sets your phone to notify you of all
messages.
• Voice Messages sets your phone not to
sound a tone or vibrate when you receive
voice messages.
• Text Messages sets your phone not to sound
a tone or vibrate when you receive text
messages.
• All sets your phone not to sound a tone or
vibrate when you receive any message.
Note: When you receive a type of message you
have set not to sound a tone or vibrate,
the message notification screen appears
as usual.
7 Press A under Done.
111
Shortcuts
Shortcuts lets you access most menu options by
pressing a number on your keypad (1 through 9) or
saying the voice name of the shortcut. You create
the shortcut and then use it to take you to that
screen any time.
Creating a Shortcut
Note: When you receive your phone, all number
keys may already be assigned to
shortcuts. If this is the case, you can
create new shortcuts by deleting or
replacing existing shortcuts.
1 Go to the menu item you want to create a
shortcut for.
For example, if you want to create a shortcut to
the screen for creating a new Contacts entry:
From the main menu, select Contacts, then
highlight [New Contact].
2 Press and hold m until a confirmation screen
appears.
3 Press A under Yes.
4 With Key highlighted, press A under Change.
5 Press the number key you want to assign to the
shortcut.
112
6 Press A under Ok.
7 If you want to record a voice name for the
shortcut: With Voice highlighted, press A under
Record. As directed by the screen prompts, say
and repeat the name you want to assign to the
number. Speak clearly into the microphone.
8 Press A under Done.
9 If the number key you chose is already assigned
to a shortcut, a prompt appears asking if you
want to replace the existing shortcut.
Press A under Yes to replace the existing
shortcut. -orPress A under No if you want to keep the
existing shortcut and assign another number key
to the shortcut.
Using a Shortcut
If you know the shortcut number:
1 From the idle screen, press m.
2 On your keypad, press the number assigned to
the shortcut.
If you do not know the shortcut number:
1 From the main menu, select Shortcuts.
2 Scroll to the shortcut you want to use. -or-
Editing a Shortcut
If you assigned a voice name to the shortcut:
Select Voice Recog from the main menu. As
directed by the screen prompt, say the name of
the shortcut into the microphone. The name of
the shortcut will be repeated back to you and the
shortcut with that voice name will be highlighted.
3 Press A under Go to.
Editing a Shortcut
To change the number assigned to a shortcut:
1
2
3
4
5
6
From the main menu, select Shortcuts.
With any shortcut highlighted, press m.
Select Reorder.
Scroll to the shortcut you want to move.
Press A under Grab.
Scroll to the place where you want the shortcut
to appear.
7 Press A under Insert.
8 Repeat step 4 through step 7 for all the items
you want to move.
9 Press A under Done.
3 Press m. Select Edit.
4 With Key or Voice highlighted, press A under
the display option on the left to change
assignments.
Deleting Shortcuts
To delete a shortcut:
1
2
3
4
5
From the main menu, select Shortcuts.
Scroll to the shortcut you want to delete.
Press m.
Select Delete.
Press A under Yes to confirm.
To delete all shortcuts:
1
2
3
4
From the main menu, select Shortcuts.
With any shortcut highlighted, press m.
Select Delete All.
Press A under Yes to confirm.
To change the number or voice name assigned to
a shortcut:
1 From the main menu, select Shortcuts.
2 Highlight any shortcut.
113
Using a Headset
Using a Remote PTTTM Button
If you use a headset or similar device with your
phone, you can set your phone to send incoming
sound to the headset only, or to the headset and
the speaker at the same time:
If you are using a headset or other accessory with
a remote PTT button, you can use the remote PTT
button for phone calls and Direct Connect calls.
1 From the main menu, select Settings >
Advanced > Headset/Spkr.
2 Press A under Change.
3 Scroll to HdsetOnly to send incoming sound to
the headset only. -orSelect Hdset&Spkr to send incoming sound to
the headset and ring tones to the speaker.
4 Press A under Select.
Note: When using a headset, the PTT button on
your phone works the same way as when
you are not using a headset. Direct
Connect® and Group Connect sounds will
be heard through the headset.
Attaching a Headset
1 Lift the audio jack cover.
2 Insert the headset connector firmly into the
audio jack. You may have to rotate the headset
connector until it fits securely into the audio jack.
114
For phone calls, use the remote PTT button to
answer calls, switch between calls, and end calls.
Hold the remote PTT button for less than 2
seconds to answer calls and switch between calls.
Hold the remote PTT button for more than 2
seconds to end calls.
For Direct Connect calls, use the remote PTT
button as you would the PTT button on your phone.
Nextel® Customer Care
There are a number of features available with your
Nextel service and your new i325 phone, so you
may be overwhelmed at first. Relax! Nextel
Customer Care is here to help. If the feature
information and instructions in this guide don’t
answer all your questions, or if you would like to
inquire about other Nextel products and services,
please feel free to contact us. Should you need
assistance, please contact us from a landline
phone, so that we can troubleshoot any issues
associated with your mobile phone.
Please take a few steps to gather information
about your phone and account prior to contacting
us. In accordance with Nextel’s Authorized Contact
Policy, you will need to supply account specific
information to validate that you are authorized to
receive information about and make changes to
the account. At minimum, we ask that you have
your Personal Telephone Number (PTN) and
Account number ready when you call. This will
better able us to provide you with the highest level
of service possible.
• Browse for information on phones, coverage,
rates and other Nextel services. View and
download user's guides, try out our interactive
virtual product and service demos, find answers
to frequently asked questions, order
accessories, locate service and repair centers,
upgrade phone software, send a message and
more.
• For self-service on your Nextel account, click on
My Account to view your account, pay your bill,
add phones to your account, reset your voice
mail password and more.
• For online assistance, click on Contact Us to
send us an email request. Our representatives
are committed to assisting you. Every effort will
be made to address your questions or concerns
within 24 hours. Contact us to add Wireless Web
and other services, change rate plans, inquire
about your bill and more.
Or, call us at 1-800-639-6111 or dial 611 from your
Nextel phone.
Domestic Customer Care
Visit www.nextel.com for a variety of Customer
Care services:
115
Nextel® Customer Care
Nextel Worldwide® Customer
Care
When traveling outside of the U.S. and Canada,
call +1 (360) 662-5202 for your Customer Care
service needs. This customer care number is
toll-free from your Nextel phone.
International coverage, rates, and other
information is available on www.nextel.com.
116
Understanding Status
Messages
You may receive status messages under certain
conditions. Before contacting Nextel Customer
Care, note the message, numeric code, and the
conditions under which it appeared. The following
table lists and describes some status messages.
Status Messages Message Description
Number Not in
Service
The number that you entered is not
valid.
User Not Available
The phone that you called is either
busy, out of coverage, or turned
off. Please try again later.
User Not
Authorized
The person that you called has not
purchased this service.
Please Try Later
This service is temporarily not
available. Please try again later.
User Busy in Direct The phone that you called is busy
in a Direct Connect call.
Connect
User Busy in Data
The phone that you called is busy
using Nextel Wireless Web
services.
Status Messages Message Description
Service Restricted
This service was restricted by
Nextel, or this service was not
purchased.
Service Not
Available
You are either out of coverage or
having problems with provisioning.
System Busy
The system is experiencing heavy
traffic. Please try again later.
Server Not
Responding
Server is currently down or traffic is
too high. Please try again later.
Service Conflict
This service cannot be enabled
because an incompatible service
has already been turned on.
No Dispatch
Number Stored
You have attempted to reach a
Nextel customer using One Touch
Direct Connect, but there is no
Direct Connect number stored in
your recent calls list.
Please Try Again
An error occurred. Please try
again.
Self Check Error +
Number Code
A fault was detected with your
phone. If this error recurs, note the
error code and contact Nextel
Customer Care.
117
Understanding Status Messages
Status Messages Message Description
Self Check Fail +
Number Code
An operational fault was detected
with your phone. Note the numeric
code, turn your phone off, and
contact Nextel Customer Care.
PIN Blocked
Call Your Provider
The incorrect PIN was entered
three consecutive times. You will
be unable to place or receive calls
on your phone. Contact Nextel
Customer Care to have them
obtain the PIN Unblock Code
(PUK) code.
Insert SIM
Your SIM card is not being
detected. Please check to ensure
that you have inserted the SIM
card correctly into your phone.
Check SIM Card
Please check your SIM card to
make sure it has been inserted
properly.
SIM PIN incorrect.
Try again.
You have entered an incorrect PIN
number.
Please Enter
Special Code
You have inserted a SIM card that
will not work with a Nextel phone.
Contact Nextel Customer Care if
you believe this is a valid SIM card.
Enter SIM PIN
Please enter your 4 to 8-digit SIM
PIN code.
118
Status Messages Message Description
Enter Unlock Code
Auto Phone Lock is activated.
Enter your unlock code.
New Browser
Message Memory
Full!
Warns of low memory for Net
Alerts.
Scanning for
Satellites
Searching for GPS satellites.
Unable to Locate
Sats
Could not find GPS satellites.
For Update Visit:
Directs you to update GPS satellite
almanac data.
Technical Error
A problem occurred in your
phone’s GPS circuitry. If this error
occurs, contact Nextel Customer
Care
Nextel® Terms and
Conditions of Service
IT IS IMPORTANT THAT YOU READ THIS
ENTIRE AGREEMENT CAREFULLY. This
wireless service agreement (the "Agreement"),
consisting of these General Terms and Conditions
and the Plan Information is an agreement between
you individually or, if a business, your business
entity or corporation ("Customer"), and the Nextel
local operating affiliate authorized to provide
service in the geographic region in which
Customer's billing address is located ("Nextel").
Should there be any conflict between this
Agreement and the terms and conditions of the
current Service Agreement or Subscriber
Agreement or other agreement between Customer
and Nextel covering the Equipment (as defined
below) accompanying this User's Guide, the terms
and conditions of the current Service Agreement or
Subscriber Agreement or other agreement will
control. Customer represents that (1) he or she is
at least 18 years of age and is legally competent to
enter into this Agreement; (2) if acting on behalf of
an entity, he or she is fully authorized to bind the
entity; (3) if acting on behalf of a corporation, the
execution of this Agreement has been authorized
by all necessary corporate actions. These services
may include, but are not limited to, wireless calling,
Direct ConnectSM walkie-talkie services,
Nationwide Direct ConnectSM walkie-talkie
services, Group ConnectSM walkie-talkie services,
wireless web services including email services
("Nextel Online® Services"), mobile messaging
services including two-way messaging and SMS
services ("Mobile Messaging") and other related
services and features. Together, the services
selected by Customer make up Customer's
"Service Plan" and are collectively referred to in
this Agreement as the "Service" provided to
Customer. Service is accessible to Customer
through the telephone, data, email or messaging
code or number(s) or email address(es)
(collectively, the "Number(s)") assigned to
Customer's account. This Agreement also governs
the purchase and/or use of Customer's cellular
phone ("Phone"), BlackBerry®, radio equipment
and all other related equipment or devices used in
connection with the Service ("Equipment"). This
Agreement governs the entire relationship between
Customer and Nextel and supersedes all earlier
versions of any agreement between Customer and
Nextel. Customer acknowledges receipt of detailed
information ("Plan Information") for each Service
selected by Customer. ALL PLAN INFORMATION
IS MADE PART OF THIS AGREEMENT AND
SHOULD BE CAREFULLY REVIEWED BY
CUSTOMER. If Plan Information conflicts with this
Agreement, this Agreement shall govern. IN
119
Nextel® Terms and Conditions of Service
CONSIDERATION OF THE PAYMENTS AND
THE MUTUAL COVENANTS AND CONDITIONS
SET FORTH IN THIS AGREEMENT, NEXTEL
AND CUSTOMER AGREE AS FOLLOWS:
1. ACCEPTANCE OF THIS AGREEMENT Customer will have accepted and be bound by this
Agreement if Customer (1) provides Nextel with a
written or electronic signature; (2) otherwise
indicates electronically that Customer accepts; or
(3) activates Service through the Equipment.
Creditworthiness of Customer - Customer must
complete a credit application ("Credit Application")
before Service may be provided to Customer. THIS
AGREEMENT SHALL NOT BE EFFECTIVE
UNTIL NEXTEL APPROVES CUSTOMER'S
CREDIT APPLICATION AND OTHERWISE
ACCEPTS THE AGREEMENT. Customer
acknowledges that Nextel will rely on the credit
information furnished by Customer ("Credit
Information") and Customer's credit history to
determine whether to provide Service to Customer.
Customer consents to Nextel's requests for and
verification of Customer's bank references and
authorizes Nextel to assess Customer's
creditworthiness from time to time by contacting
standard commercial credit reference services.
Customer represents and warrants that all Credit
Information is current, complete and accurate.
Nextel may require Customer to update its Credit
120
Information from time to time, and Customer
agrees to notify Nextel immediately of any change
to its Credit Information. NEXTEL MAY, AT ANY
TIME, TERMINATE THE SERVICE OF ANY
CUSTOMER THAT DOES NOT PROVIDE
CURRENT, COMPLETE AND ACCURATE
CREDIT INFORMATION. Nextel may, at any time
in its sole discretion, place restrictions on
Customer's use of Service, including but not limited
to, a limitation on the amount of charges Customer
may incur with respect to any Number. In this
event, Nextel shall provide reasonable notice to
Customer. Customer acknowledges that Nextel
may provide Customer's payment history and other
billing/charge information regarding the Service or
Equipment to any credit reporting agency or
industry clearinghouse.
Deposits - Nextel may, at any time in its sole
discretion, require a deposit ("Deposit") from
Customer to be held as a guarantee of payment.
Customer grants to Nextel a security interest in any
Deposit to secure all current or future amounts
owed to Nextel. The Deposit may be mixed with
other funds and will not earn interest, except as
required by applicable law. Customer may not use
the Deposit to pay Customer's bills or to extend
payment. Nextel may, at any time, determine that
Customer's Deposit is insufficient and, upon notice
to Customer, require an increase in the Deposit to
the extent permitted by law. In this event,
Customer must either furnish the increased
Deposit to Nextel within a reasonable time of its
receipt of notice or terminate the Agreement during
this period without incurring any liability for early
termination. If Customer does not furnish Nextel
with the increased Deposit amount or terminate the
Agreement and pay to Nextel all amounts
Customer owes to Nextel in a timely manner,
Nextel may terminate the Agreement and
Customer shall be liable to Nextel for early
termination in accordance with Section 7 below.
Nextel will apply the Deposit against any amount
owed to Nextel at the end of the first billing cycle
following the date that is one year from when
Nextel received the deposit ("Application Date"),
or, if earlier, upon termination of the Agreement or
such other time as required by law. Nextel will
return the Deposit (or any remaining balance) to
Customer within ninety (90) days (or such shorter
period as may be required by law) after termination
of the Agreement. After the Application Date and
upon Customer's request, Nextel will return to
Customer within thirty (30) days of such request
any balance remaining on the Deposit. Deposits
will be returned to Customer, in whole or in part, at
Customer's last known address. If required by law,
Nextel will forward to appropriate state authorities
any remaining balance that the postal service is
unable to deliver to Customer.
2. AGREEMENT TERM - The term of this
Agreement for each Number has been provided to
the Customer and shall begin on the date
Customer accepts the Agreement in accordance
with Section 1 above. Customer may be required to
commit to a fixed one or two-year minimum term
("Minimum Term"), depending on the Service Plan
selected by Customer. Service Plans without a
Minimum Term may be terminated by Customer by
providing Nextel with thirty (30) days written notice.
IF CUSTOMER SELECTS A SERVICE PLAN OR
FEATURE OR PARTICIPATES IN A PROMOTION
THAT REQUIRES A MINIMUM TERM,
CUSTOMER SHALL PURCHASE SERVICE FOR
THE FULL TERM AND, UNLESS OTHERWISE
PROVIDED IN THIS AGREEMENT, PAY
DAMAGES TO NEXTEL (AS DISCUSSED IN
SECTION 7 BELOW) IF THE AGREEMENT IS
TERMINATED BEFORE COMPLETION OF THE
MINIMUM TERM. CUSTOMER MAY BE
REQUIRED TO COMMIT TO A NEW MINIMUM
TERM IF CUSTOMER CHANGES SERVICE
PLANS, PARTICIPATES IN A PROMOTION, OR
UPGRADES EQUIPMENT DURING ANY
EXISTING TERM OR MINIMUM TERM. Customer
will not be liable to Nextel for early termination if
service is terminated under the applicable return
policy. Information about Nextel's return policy, if
applicable, will be made available to customer at
the place of sale and will become a part of this
121
Nextel® Terms and Conditions of Service
Agreement. Nextel may extend the Minimum Term
by any period of time during which Service was
suspended to Customer or during time on a
seasonal Service Plan. Upon completion of the
term, this Agreement shall automatically renew on
a month to month basis until the Agreement is
terminated by either Nextel or Customer upon thirty
(30) days prior notice. Nextel may, in its sole
discretion, decide not to renew this Agreement at
any time before completion of the term or any
renewal period.
3. CHANGES TO AGREEMENT - SUBJECT TO
APPLICABLE LAW, NEXTEL MAY, AT ANY TIME
IN ITS SOLE DISCRETION, MODIFY ANY OF
THE TERMS AND CONDITIONS OF THIS
AGREEMENT, INCLUDING BUT NOT LIMITED
TO THE RATES IT CHARGES TO CUSTOMER.
NEXTEL WILL PROVIDE NOTICE TO
CUSTOMER OF ANY MATERIAL
MODIFICATION. If the modification is material and
adverse to Customer (e.g., the modification
increases the monthly Service Plan rates charged
to Customer or decreases the number of minutes
included in the Customer's monthly Service Plan)
and Customer does not agree to accept the
modification, Customer may terminate this
Agreement without incurring any liability to Nextel
for early termination by notifying Nextel within sixty
(60) calendar days (or such longer period as may
be authorized by Nextel) after the effective date of
122
the modification. The effective date of the
modification will be set forth in the written notice
provided to Customer. If Customer does not
terminate the Agreement during the sixty (60) day
period, Customer will have agreed to accept the
modification and the modification shall have
retroactive effect to its effective date.
4. USE OF SERVICE OR EQUIPMENT Customer shall not use the Service or the
Equipment in any unlawful manner (including, but
not limited to, use in any aircraft or motor vehicle
where prohibited by law, ordinance, or regulation),
or in a manner that may be abusive, harassing,
threatening or fraudulent. Customer is solely
responsible for all content transmitted using the
Service or the Equipment and shall not use the
Service or Equipment to communicate any (1)
harassing, threatening, defamatory, pornographic
or obscene messages; (2) unsolicited commercial
messages; or (3) unsolicited commercial and/or
bulk text or SMS messages. Customer shall not
use the Service or Equipment in a manner that
could result in damage or risk to the business,
reputation, properties, or services of Nextel or to
Nextel's subscribers, third parties or to the public
generally. Accordingly, by way of example,
Customer shall not attempt to gain unauthorized
access to the Service or any account on the
Service, use the Service to infringe the copyright of
another, or upload or transmit any "virus", "worm"
or other malicious code. Customer shall not
modify, disassemble, deinstall or alter the
Equipment in any manner, except in accordance
with the use instructions accompanying the
Equipment. Customer may not resell or lease the
Service or the Equipment to any other person or
party.
Change in Service/Number - Any change in the
Service or the Equipment may require additional
programming or Equipment or changes to
Numbers assigned to Customer. Customer may be
assessed a programming fee in connection with
any change requested by Customer. Nextel may,
at any time, change or remove any Number
assigned to Customer when such change is
reasonably necessary in the conduct of Nextel's
business. Customer acknowledges that Customer
has no proprietary or ownership rights or interest in
Customer's Number(s) and cannot acquire such
rights or interest through usage, publication or
otherwise. Customer may not assign its Number to
any other Equipment and shall not program any
other Number into its Equipment. In the event that
wireless number portability becomes available in
Customer's Service Area, Customer may request
that its Phone number(s) be ported to another
service provider. Upon such request, all amounts
then owed to Nextel (including damages for early
termination and any amounts that appear on the
final invoice) shall become immediately due and
payable, and Customer's failure to provide timely
payment to Nextel could delay Nextel's facilitation
of Customer's request.
Number GuardSM - If Customer selected Number
GuardSM, there may be a delay in porting of
Customer's telephone number(s) to another carrier
while Customer's permission for porting is sought
by Nextel. Number GuardSM is a free service that
can be removed at any time by contacting Nextel at
1-800-639-6111.
5. NEXTEL ONLINE® SERVICES - Nextel Online®
Services consist of applications such as email,
data, information and other wireless Internet
services ("Online Applications"). Customer
acknowledges that no guarantee or assurance
exists that the Online Applications will be
compatible, or, if currently compatible, will continue
to be compatible, with Nextel's network or with
Customer's Equipment or Service. Nextel does not
endorse any Online Application, even if currently
compatible with Nextel's network or with
Customer's Equipment or Service. Nextel may, at
any time in its sole discretion, disable or
discontinue any Online Application for any reason.
Use of Nextel Online® Services requires Internet
compatible Equipment, and is subject to applicable
storage, memory or other Equipment limitations.
123
Nextel® Terms and Conditions of Service
Only certain Internet sites may be accessed by
Customer, and certain Nextel Online® Services
may not be available in all areas where Service is
provided.
Content - Customer may, from time to time, access
through Nextel Online® Services statements,
opinions, graphics, photos, music, services and
other information ("Content"), including Content
provided by third parties. Customer acknowledges
that Nextel offers no guarantee or assurance
regarding the accuracy, completeness,
appropriateness or utility of the Content. Customer
also acknowledges that Nextel does not publish
and is in no way responsible for any Content that is
provided by third parties. Customer also may
establish contact with third parties through Nextel
Online® Services. Nextel is not responsible for the
actions of third parties contacted by Customer,
whether such contact was initiated by Customer or
was brought about through an embedded link on
the Equipment. Content providers and others have
proprietary interests in certain Content. Customer
shall not, and will not permit others, to reproduce,
broadcast, distribute, sell, publish, commercially
exploit or otherwise disseminate any Content in
any manner without the prior written consent of
Nextel, the Content providers, or others with
proprietary interests in such Content, as
applicable.
124
Network Security - Nextel may take any action that
it deems necessary to (1) protect its network, its
rights or the rights of its customers and third
parties; or (2) optimize or improve its network, its
Services and the Equipment. Customer
acknowledges that such action may include,
without limitation, employing methods,
technologies, or procedures to filter or block
messages sent through Nextel Online® Services.
Nextel may, in its sole and absolute discretion, at
any time, filter "spam" or prevent "hacking,"
"viruses" or other potential harms without regard to
any Customer preference.
Application Support - Nextel is often not the
developer of Online Applications that are
accessible through Nextel Online® Services.
Therefore, if Customer contacts Nextel's Customer
Care department regarding use of an Online
Application, Customer may be referred to the
customer care department of the developer of the
Online Application, and Nextel shall not be
obligated to support any such Online Application.
6. SERVICE AVAILABILITY - Service is generally
available to Customer when Customer is within the
operating range of the Nextel network or within the
range of a provider with which Nextel has a
reciprocal service arrangement ("Service Area").
Customer acknowledges that any map, diagram or
other illustration of Customer's Service Area is only
an estimate and actual service coverage may vary.
CUSTOMER'S SERVICE AREA IS SUBJECT TO
CHANGE AT ANY TIME IN NEXTEL'S SOLE
DISCRETION. Service quality and availability
within Customer's Service Area is also affected by
conditions Nextel does not control, including the
Equipment, problems associated with
interconnecting carriers, power failures, "viruses",
obstructions such as buildings or trees, tunnels,
atmospheric, geographic or topographical
conditions and other conditions. Service also may
be limited or temporarily unavailable due to system
capacity limitations or system repairs or
modifications. Nextel also may be required during
public safety emergencies or when system
capacity is otherwise limited to limit access to the
Nextel network for those customers that are not
then using the Service and connected to the
network in order to facilitate communications by
public safety organizations such as police and fire
departments. In this event, customers that have
priority access Service as part of their Service Plan
will be given access to the Nextel network before
Nextel's non-priority access customers. Nextel will
not complete calls to 900, 976 or similar numbers
for pay-per-call services. Caller identification
information may not be available for all incoming
calls. International calling may be blocked.
7. RATES AND CHARGES - Customer shall pay in
full all charges for Services provided under this
Agreement and any Service Plan that becomes
part of this Agreement, including monthly service
charges, usage charges, taxes, assessments and
any additional fees or charges imposed on
Customer or on Nextel and associated with the
Service or the Equipment. Customer is responsible
for all charges or purchases associated with
Customer's Number and Equipment whether or not
Customer was the user of the Service or
authorized its use. If Customer fails to pay any
amounts when due under this Agreement,
Customer shall be in default and Nextel shall be
entitled to exercise any remedies available to it
under this Agreement or at law or in equity.
Service Charges - Customer shall pay all charges
for Services selected by Customer as part of
Customer's Service Plan, and any additional
Services selected by Customer. Customer's
Service Plan will be offered at the rates and subject
to the conditions set forth in the Service Plan
Information provided to Customer at the time of
sale. CUSTOMER'S SERVICE PLAN
INFORMATION SHALL BE CONSIDERED PART
OF THIS AGREEMENT. Rates charged to
Customer include monthly access charges and
may include activation and other fees associated
125
Nextel® Terms and Conditions of Service
with features such as voicemail and caller
identification. Monthly access charges shall begin
once Customer's Service is activated, which may
occur before Customer receives the Equipment.
Usage Charges - Depending on the Service Plan
selected, Customer may incur usage charges for
Services such as: wireless calling, Direct
ConnectSM, Nationwide Direct ConnectSM, Group
ConnectSM, Mobile Messaging, Nextel Online®
Services and other Services that may be offered
from time to time. Usage charges may vary
depending on how, where and when Customer
uses the Service. Customer may be assessed long
distance charges (including international calling) or
other charges for "toll-free" calls to 800, 866, 877,
888 and other toll-free numbers. Customer also
may be charged for the use of special Services
such as 411 services or call-forwarding. Airtime
charges will be assessed for the entire period
during which a call or Direct ConnectSM
transmission is connected to the Nextel network. A
wireless call connection begins approximately
when Customer presses the button to initiate an
outgoing call or the phone starts ringing for an
incoming call and ends approximately when the
first party terminates the call. Customer shall be
responsible for all charges for incoming wireless
calls that are answered. A Direct ConnectSM or
Group ConnectSM transmission occurs
approximately when Customer presses the button
126
to initiate a transmission and ends approximately
six (6) seconds after completion of a
communication (i.e., when Customer or another
participant releases the button) to which no
participant responds. Customer initiates a new
Direct ConnectSM or Group ConnectSM transmission
if Customer responds more than six (6) seconds
after the other participant completes a
communication. Nationwide Direct ConnectSM calls
use the Direct ConnectSM minutes in Customer's
plan and incur an additional access charge. Airtime
charges for Direct ConnectSM or Group ConnectSM
transmissions or Nationwide Direct ConnectSM
access are charged to the customer that initiates
the transmission and, unless a rate plan includes
unlimited transmissions or access, are calculated
by multiplying the duration of the transmission
(including the six (6) second period referred to
above) by the applicable rate and the number of
participants. Customer will not be charged for
sending or receiving call alert transmissions ("Call
Alerts"), but will be deemed to have initiated a new
Direct ConnectSM transmission if Customer
responds to a Call Alert, even if Customer
responds within six (6) seconds of receiving the
Call Alert. Text and numeric messaging will be
charged on a per message basis; however,
Customer may elect to purchase a certain number
of messages for a fixed monthly price. Any
messages in excess of Customer's allotted
messages will be charged at the per message rate.
Depending on the plan, Customer may be charged
on a per kilobyte basis (one megabyte equals 1024
kilobytes and one kilobyte equals 1024 bytes), for
Customer's use of Nextel Online® Services.
Kilobytes may be used for, without limitation,
browsing the Internet, accessing Nextel Online®
Applications and for reading, sending and
responding to email. Airtime minutes allotted to
Customer under Customer's wireless calling plan
may be used in connection with certain Nextel
Online® Services. CUSTOMERS ARE CHARGED
AT LEAST ONE (1) MINUTE OF AIRTIME FOR
ALL WIRELESS CALLS AND AT LEAST SIX (6)
SECONDS OF AIRTIME FOR ALL DIRECT
CONNECTSM TRANSMISSIONS, REGARDLESS
OF LENGTH. AFTER THE INITIAL MINUTE,
AIRTIME CHARGES FOR WIRELESS CALLING
ARE ROUNDED-UP AND BILLED TO THE NEXT
SECOND OR TO THE NEXT MINUTE,
DEPENDING ON CUSTOMER'S SERVICE PLAN.
AFTER SIX (6) SECONDS, DIRECT CONNECTSM
TRANSMISSIONS ARE ROUNDED-UP AND
BILLED TO THE NEXT SECOND. DATA USAGE
FOR NEXTEL ONLINE® SERVICES IS ROUNDED
TO THE NEAREST ONE-TENTH (1/10) OF A
KILOBYTE.
Taxes, Fees and Assessments - Customer shall
pay all federal, state, and local taxes and fees that
are imposed on transactions subject to this
Agreement. Customer shall not be responsible for
taxes and fees imposed on Nextel's net income or
property. Customer shall be responsible for all
taxes and fees (whether imposed upon Customer
or Nextel) that are measured by gross receipts
from sales made to Customer or imposed as a
per-line or per-unit charge. Applicable taxes and
fees include, but are not limited to, the following:
federal, state, and local excise taxes, sales and
transaction taxes, gross receipts taxes, utility
taxes, and statutory 911 fees. Any Customer who
is eligible for an exemption from any tax or fee
must provide Nextel with a valid and properly
executed exemption certificate for the exemption to
be effective. Customer shall provide Nextel with
the Primary Place of Use (i.e., Customer's
residential street address or primary business
address) for each unit activated on Customer's
account, and notify Nextel of any changes in such
address. Additional fees and assessments apply to
Customer's monthly Service Plan. The charges
may change and may vary depending on where
customer is located. The charges include, but are
not limited to, a Universal Service Fund
assessment and a Telephone Relay Service fee.
Nextel also imposes a Federal Programs Cost
Recovery ("FPCR") fee that is not a tax or
127
Nextel® Terms and Conditions of Service
government mandated, but is collected to recover
Nextel's costs for complying with Federal
Communications Commission ("FCC") programs
and mandates. The FPCR fee is subject to
adjustment, and Nextel will provide advance notice
to Customer through the "Nextel News" section of
Customer's bill or a bill insert of any significant
increase in the FPCR fee. Please consult the
current Nextel pricing materials, a sales consultant
or visit http://www.Nextel.com for information
regarding the FPCR fee and the current amount of
the fee. Additional fees may be added to
Customer's bill to recover Nextel's costs for funding
government programs or initiatives.
Early Termination Component of Rate Structure Nextel incurs a significant cost in activating Service
to Customer, including a large up-front cost in
offering Equipment to Customer. These costs are
partially recouped over the length of Customer's
Agreement with Nextel through monthly service
rate charges to Customer, which have been
established in part for this purpose. If Customer
breaches this Agreement or terminates Service for
any reason (including by porting its Phone number
to another service provider), Customer
understands and acknowledges that Nextel will not
receive the full benefit of its Agreement with
Customer, in part, because Nextel will not continue
to receive monthly service charges from Customer.
As a result, Nextel shall incur damages that are
128
difficult, if not impossible, to determine.
THEREFORE, IN THE CASE OF BREACH OR
EARLY TERMINATION OF THE AGREEMENT BY
CUSTOMER, CUSTOMER SHALL PAY TO
NEXTEL, AS LIQUIDATED DAMAGES AND NOT
AS A PENALTY (IN ADDITION TO ALL
AMOUNTS THEN OWED TO NEXTEL), $200
FOR EACH NUMBER ASSIGNED TO
CUSTOMER'S ACCOUNT AS A REASONABLE
ESTIMATE OF THE DAMAGES INCURRED BY
NEXTEL. This is intended to maintain Nextel's
overall rate at an acceptable level despite
Customer's early termination and will be assessed
without exception unless otherwise provided in this
Agreement or by applicable law.
Failure to Pay - Customer acknowledges that time
is of the essence with respect to all amounts owed
to Nextel. IF CUSTOMER HAS NOT PAID ITS
MONTHLY INVOICE IN FULL BY THE DUE
DATE, A LATE PAYMENT CHARGE OF UP TO
1.5% PER MONTH (18% ANNUALLY), OR SUCH
LESSER AMOUNT PERMITTED BY LAW, MAY
BE APPLIED TO THE TOTAL UNPAID BALANCE
DUE AND OUTSTANDING. THIS LATE
PAYMENT CHARGE IS ASSESSED TO
RECOVER COSTS FOR CUSTOMER'S FAILURE
TO PAY AND SHALL NOT CONSTITUTE
INTEREST. Nextel's acceptance of late or partial
payments (even if marked "paid in full" or similar
notations) shall not waive Nextel's right to collect
the full amount due under this Agreement, plus any
additional amounts charged under this paragraph.
If Nextel obtains the services of a collection or
repossession agency or an attorney to assist in
remedying any breach of this Agreement by
Customer, including but not limited to, Customer's
nonpayment of charges, Customer shall be liable
for this expense.
Disputed Charges - Customer may dispute only
those charges that Customer believes are the
result of (1) a billing error; (2) a problem related to
Customer's Service; or (3) dropped calls. To
dispute any charge, Customer must pay all
undisputed amounts when due and submit a
written notice to Nextel within ninety (90) days of
the problem or before the end of the third billing
cycle after the date upon which the problem
occurred, whichever occurs later. CUSTOMER
WAIVES THE RIGHT TO DISPUTE ANY
CHARGES FOR WHICH TIMELY NOTICE IS NOT
PROVIDED TO NEXTEL. Nextel shall resolve all
disputed charges in its sole discretion. If Nextel
determines that an error was made on Customer's
invoice, Nextel will credit Customer's account in the
amount of the error. If Nextel determines that a
disputed charge was validly assessed upon
Customer, Nextel will notify Customer and
Customer must furnish the amount to Nextel within
a reasonable period of time; or, if authorized by
Customer, Nextel may instead charge Customer's
credit card or debit card by any amount that was
validly assessed. If Customer fails to pay any
undisputed amount or, after a reasonable period of
time, fails to pay any amount determined by Nextel
to have been validly assessed upon Customer,
Nextel may exercise any remedies available to
Nextel under this Agreement for non-payment,
including termination of the Agreement. Customer
hereby acknowledges that he or she has read the
explanation of rates and charges set forth in this
Section 7 and understands that these rates and
charges may be assessed upon Customer, to the
extent applicable.
8. BILLING - Nextel shall issue invoices for Service
and for purchases of Equipment. Nextel's invoicing
cycle is approximately thirty (30) days, but may
change from time to time. The day of the month on
which Customer receives an invoice may vary and
is subject to change. Service charges will be
invoiced to Customer in advance, and usage
charges will be invoiced in arrears. Customer may
be assessed a shipping charge for Equipment
delivered to Customer. Unless otherwise specified
in Customer's Service Plan, any unused minutes or
other allotted Services under Customer's Service
Plan will not be carried over to any other billing
cycle. If Customer's Service is terminated for any
reason (including if Customer's Number is ported)
before the end of any billing cycle, no credit or
refund will be provided for unused minutes or other
129
Nextel® Terms and Conditions of Service
allotted Services and any monthly service charge
will not be prorated to the date of termination. On
occasion, Customer may be billed for Services in a
month other than the month in which Customer
used the Service. The creation of new cell sites,
Nextel's implementation of new billing technology,
delays in the reporting of international or other
roaming charges between carriers, and other
similar events may result in such delayed billing.
Nextel may bill Customer on behalf of third party
providers of Online Applications that are accessed
by Customer through the Equipment. Nextel may
retain a percentage of these charges before
providing the balance to the third party provider of
such Online Application.
9. PAYMENTS - Recurring Credit/Debit Card
Payments
Customer may pay any amount owed to Nextel by
using a credit or debit card acceptable to Nextel. If
Customer wishes to pay all amounts in this manner
on a recurring basis, Customer must complete a
separate payment enrollment form ("Payment
Form"). Customer acknowledges that upon signing
the appropriate Payment Form, the Payment Form,
including its applicable terms and conditions, will
become a part of this Agreement. Customer shall
promptly notify Nextel of any changes to the credit
or debit card (e.g., if the card is terminated, lost,
stolen or the expiration date changes) or bank
130
account used for payment. Enrollment is for the
duration of this Agreement unless cancelled earlier
by either Customer or Nextel upon thirty (30) days
advance written notice to the other party.
Specific Form of Payment - Nextel may, at any
time and from time to time, as it deems appropriate
(e.g., following receipt of a dishonored check or
other instrument), demand that Customer make
payment by money order, cashier's check, or a
similarly secure form of payment. Nextel also may
require at any time in its sole discretion that the
Equipment be purchased for cash only. In this
case, title to the Equipment shall be transferred to
Customer only after receipt by Nextel of a cashier's
or certified check or other equally secure form of
payment in the amount required by Nextel.
Dishonored Checks - Nextel may charge Customer
up to the highest amount permitted by law for any
check or other instrument tendered by Customer
and returned unpaid by a financial institution for
any reason.
10. SUSPENSION, LIMITATION OR
TERMINATION OF SERVICE OR THIS
AGREEMENT - General - Nextel may limit,
suspend or terminate Customer's Service or this
Agreement at any time and without providing
notice to Customer if: (1) Customer fails to pay any
charges (including, without limitation, any charges
assessed on behalf of third parties) when due
under this Agreement; (2) Customer behaves in an
abusive, derogatory, or otherwise unreasonable
manner to any Nextel employee, representative or
agent; (3) Nextel has reason to believe that
Customer's Service is being used in a fraudulent
manner or for an illegal purpose (such as unusual
activity levels or calling patterns); (4) Customer's
Service is being used in a way that adversely
affects other Customers' Service or Nextel's
business operations; (5) Customer provides Credit
Information that is false, inaccurate, dated or
cannot be verified or Customer becomes insolvent
or subject to any proceeding under the Bankruptcy
Code or similar laws; (6) Nextel discovers that
Customer is underage or does not otherwise
possess the capacity or the authorization to enter
into this Agreement; (7) Customer's use of the
Service or Equipment exceeds limitations or
violates any restrictions placed on Customer's
account or otherwise breaches this Agreement; or
(8) Nextel, in its sole discretion, believes action is
required to protect its interests or the interests of
Customer or its other customers. NEXTEL SHALL
NOT BE LIABLE TO CUSTOMER OR TO ANY
OTHER PARTY FOR EXERCISING OR FAILING
TO EXERCISE ITS RIGHTS UNDER THIS
SECTION TO LIMIT, SUSPEND OR TERMINATE
SERVICE OR THE AGREEMENT. If Customer's
Service is subject to fraudulent use, Customer
shall immediately notify Nextel's Customer Care
department, provide Nextel with any
documentation and information that it requests and
otherwise cooperate with Nextel in the
investigation of such incident. If Nextel terminates
Service to Customer, and Service is not
reconnected within thirty (30) calendar days, all
amounts owed to Nextel (including any damages
for early termination) shall become immediately
due and payable.
Reactivation - Nextel may, but is not required to,
reactivate Service to Customer after Service has
been suspended or terminated in accordance with
the previous subsection. Before Service may be
reactivated, Customer must pay to Nextel all past
due amounts plus a reconnection charge equal to
$25.00 per Number, plus applicable taxes. Nextel
may modify the terms of Service before
reactivating Service to Customer and may require
Customer to provide Nextel with an initial Deposit
or an additional Deposit.
11. RELEASE OF CUSTOMER INFORMATION Privacy - Wireless systems use radio channels to
transmit communications that may be accidentally
or intentionally intercepted. Although federal and
state laws may make it illegal for third parties to
listen in on Customer's Service, privacy cannot be
guaranteed. NEXTEL SHALL NOT BE LIABLE TO
131
Nextel® Terms and Conditions of Service
CUSTOMER OR TO ANY THIRD PARTY FOR
EAVESDROPPING ON OR INTERCEPTION OF
COMMUNICATIONS MADE WHILE USING THE
SERVICE OR THE EQUIPMENT.
911 or Other Emergency Calls - The Service does
not interact with 911 and other emergency services
in the same manner as non-wireless or landline
telephone services. Depending on Customer's
location, the type of Equipment being used, the
type of equipment being utilized by any applicable
emergency services provider, and the
circumstances and conditions of a particular call,
Customer's phone number and/or location may not
be identifiable to emergency services providers
and Customer may not be connected to the
appropriate emergency services provider. In
certain circumstances, a 911 call may be routed to
a state patrol dispatcher. Nextel is deploying
wireless E911 compatible Equipment that meets
applicable FCC requirements and that is designed
to help public safety authorities locate users of the
Service who make 911 calls. However, E911
service that is compatible with the FCC technical
requirements is not available in all areas, and even
in those areas where it is available, it is not entirely
reliable. Moreover, if Customer's Equipment is not
GPS-enabled, emergency services personnel may
have much less precise location information about
the Customer, compared to the information
available to them if Customer's Equipment was
132
GPS-enabled. The information available to
emergency service providers may also be limited if
Customer's number or numbers are in the process
of being ported. Customer acknowledges that
E911 service is not available in all areas, is not
completely reliable and is further limited when
using non-GPS enabled Equipment or during the
number porting process. Customer consents to
Nextel's disclosure of Customer information to
governmental and public safety authorities in
response to emergencies. This information may
include, but is not limited to, Customer's name,
address, Number, and the location of the user of
the Service at the time of call.
Access, Use and Disclosure of Customer
Information and Communications - Customer
acknowledges and agrees that Nextel may access,
use, and disclose to third parties, any information
whether personally identifying information, or
"customer proprietary network information"
("CPNI") within the meaning of 47 U.S.C. § 222
and its implementing regulations ("CPNI
Regulations") that Nextel collects, possesses or
develops about Customer to: (1) provide Customer
with Equipment, Service, or customer support; (2)
conduct marketing activities in accordance with
applicable law (customer may opt out of any such
marketing by contacting Nextel); (3) enable
Customer to switch to a new service provider
(either Nextel or another service provider) while
retaining the same phone number; (4) list
Customer's contact information (e.g., name,
address, and Number) in a telephone or subscriber
directory, or include such information in a directory
assistance service; (5) provide handset-based or
network-based geographic information services via
Nextel-provided or third party software
Applications; (6) comply with applicable law; or (7)
respond to emergencies. Customer acknowledges
that any information that identifies Customer (e.g.,
Customer's name and Number) and calls made by
Customer may appear on the Equipment or bill of a
person or party that receives Customer's call.
Nextel may access, use, disclose, record or
monitor any communications to or from Customer
or any other person to protect Nextel's rights or
property or those of other customers, as permitted
by law.
information (i.e., the geographic coordinates of the
Equipment) may be accessed, used, or disclosed
in connection with the Service. For any geographic
information service that is governed by the CPNI
regulations or a similar law, Nextel will provide
Customer with a separate notice and opportunity to
consent to the access, use, and disclosure of
geographic information. CUSTOMER SHALL
HOLD HARMLESS AND INDEMNIFY NEXTEL
AGAINST ANY AND ALL CLAIMS, LOSSES,
EXPENSES, DEMANDS, ACTIONS, OR CAUSES
OF ACTION (INCLUDING ALL ACTIONS BY
THIRD PARTIES) ARISING OUT OF A BREACH
OF CUSTOMER'S OBLIGATION TO NOTIFY
USERS AS SET FORTH IN THIS SECTION OR
CUSTOMER'S USE OF ANY GEOGRPAHIC
INFORMATION SERVICE OR LOCATION
INFORMATION.
Geographic Information Services - Consistent with
the foregoing, Customer acknowledges and agrees
that Nextel or a third party application service
provider may access, use, and disclose to third
parties the geographic location of Customer's
Equipment to provide Customer with any
geographic information service which Customer
accesses through the Service or Equipment. If
Customer utilizes any such service and there are
additional users on Customer's account, Customer
shall clearly, conspicuously, and regularly notify all
individual users of the Service that location
12. EQUIPMENT - Customer shall provide Nextel
with an initial payment in the amount required by
Nextel, to be applied towards any amount owed to
Nextel one (1) year from the effective date of the
Agreement. Customer acknowledges that Nextel is
not responsible for the Equipment or its installation.
Nextel is not responsible for the operation, quality
of transmission, or, unless separate maintenance
arrangements have been made between Nextel
and Customer, for maintenance of the Equipment.
Customer further acknowledges that Equipment
purchased from Nextel is not compatible with and
133
Nextel® Terms and Conditions of Service
will not support services provided by other wireless
carriers, except for those services provided by an
entity operating compatible iDEN equipment or in
connection with roaming to certain countries
outside of the United States. NEXTEL SHALL NOT
BE LIABLE FOR ANY DAMAGES (INCLUDING
DAMAGE TO THE EQUIPMENT) RESULTING
FROM INSTALLATION OF THE EQUIPMENT BY
CUSTOMER OR ANY THIRD PARTY. UPON
CUSTOMER'S ACCEPTANCE OF DELIVERY OF
THE EQUIPMENT, ALL RISK OF LOSS,
DAMAGE, THEFT, OR DESTRUCTION TO THE
EQUIPMENT SHALL BE BORNE BY THE
CUSTOMER. NO LOSS, DAMAGE, THEFT, OR
DESTRUCTION OF THE EQUIPMENT, IN
WHOLE OR IN PART, SHALL IMPAIR
CUSTOMER'S OBLIGATIONS UNDER THIS
AGREEMENT, INCLUDING, WITHOUT
LIMITATION, CUSTOMER'S RESPONSIBILITY
FOR THE PAYMENT OF SERVICE CHARGES
DUE UNDER THE AGREEMENT.
Insurance - Customer may purchase Direct Protect
insurance ("Direct Protect") to protect Customer
against loss, theft, incidental damage or accidents
involving Customer's Equipment. However, Direct
Protect is not available for certain Equipment.
Customer acknowledges that Direct Protect
insurance is provided by The Signal
Telecommunications Insurance Services ("Signal")
and not by Nextel. If Customer selects Direct
134
Protect coverage, Customer will be assessed a
monthly charge, which Nextel will remit to Signal
on Customer's behalf. Any requests for information
or claims regarding Direct Protect shall be directed
to Signal. Customer acknowledges that a summary
of coverage is available at www.nextel.com, which
information is also available by calling Signal at
1-888-352-9182.
Lost or Stolen Equipment - If Customer's
Equipment is lost or stolen, Customer agrees to:
(1) notify Nextel within two calendar days by calling
Nextel's Customer Care department; (2) provide
Nextel with any documentation and information
that it requests; and (3) otherwise cooperate with
Nextel in the investigation of such incident.
13. DISCLAIMER OF WARRANTIES - NEXTEL
MAKES NO REPRESENTATIONS OR
WARRANTIES, STATUTORY, EXPRESS OR
IMPLIED, INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE
OR NON-INFRINGEMENT CONCERNING
CUSTOMER'S SERVICE OR THE EQUIPMENT.
NEXTEL DOES NOT AUTHORIZE ANYONE TO
MAKE ANY REPRESENTATION OR WARRANTY
ON ITS BEHALF, AND CUSTOMER SHOULD
NOT RELY ON ANY SUCH STATEMENT(S). ANY
STATEMENTS MADE IN PACKAGING,
MANUALS OR OTHER DOCUMENTS, OR BY
ANY NEXTEL EMPLOYEES, AGENTS OR
REPRESENTATIVES, ARE PROVIDED FOR
INFORMATIONAL PURPOSES ONLY AND NOT
AS WARRANTIES BY NEXTEL OF ANY KIND.
CUSTOMER ASSUMES ALL RESPONSIBILITY
FOR USE OF THE SERVICE AND THE QUALITY
AND PERFORMANCE OF THE EQUIPMENT.
CUSTOMER ACKNOWLEDGES THAT SERVICE
MAY NOT BE ERROR-FREE AND THAT
INTERRUPTIONS WILL LIKELY OCCUR FROM
TIME TO TIME. NEXTEL DOES NOT
MANUFACTURE THE EQUIPMENT AND ANY
STATEMENT REGARDING THE EQUIPMENT
SHOULD NOT BE INTERPRETED AS A
WARRANTY. THIS SECTION SHALL SURVIVE
TERMINATION OF THIS AGREEMENT.
14. LIMITATION OF LIABILITY AND REMEDIES
FOR BREACH - Nextel shall not be liable for: (1)
any deficiency in the Service, including, but not
limited to, mistakes, omissions, interruptions
(including, among others, interruptions caused by
Equipment or facilities failure or shortages), errors,
failures to transmit, delays or defects, network
problems, lack of coverage or network capacity,
dropped calls, inability to access the Service or
inability to place or receive calls or problems of
unauthorized access; (2) the unavailability or any
failure or delay in delivery of the Equipment or the
cancellation of any orders of Equipment by the
manufacturer; (3) any suspension or termination of
Service by Nextel or any other action taken by
Nextel in its sole discretion intended to protect the
Nextel wireless network, systems, and the rights or
property of Nextel, its Customers, or others from
"hacking," "spamming," "viruses" or other potential
harms that Nextel believes may adversely impact
its network or systems; (4) the availability or use of
Nextel Online® Services, including but not limited
to, the compatibility or use of Online Applications or
Content, whether or not supported by Nextel, or
any contact with third parties through the use of
Nextel Online® Services; (5) any damage or
personal injury allegedly caused by use of the
Equipment or Service; (6) any other damage due
directly or indirectly to causes beyond Nextel's
control, including, but not limited to, any act or
omission of any carrier or service provider other
than Nextel; or (7) acts of God, acts of public
enemies, acts of the government, acts or failure to
act of Customer, its agents, employees or
subcontractors, fires, floods, epidemics, quarantine
restrictions, corrosive substances in the air or other
hazardous environmental conditions, strikes,
freight embargoes, inability to obtain materials or
services, commotion, war, terrorism, unusually
severe weather conditions or default of Nextel's
subcontractors.
135
Nextel® Terms and Conditions of Service
WITHOUT LIMITING THE FOREGOING,
NEXTEL'S SOLE LIABILITY FOR SERVICE
DISRUPTION, WHETHER CAUSED BY THE
NEGLIGENCE OF NEXTEL OR OTHERWISE, IS
LIMITED TO A CREDIT ALLOWANCE OF NOT
MORE THAN THE PROPORTIONATE CHARGE
TO CUSTOMER FOR THE PERIOD OF SERVICE
DISRUPTION. EXCEPT AS OTHERWISE SET
FORTH IN THE PRECEDING SENTENCE, IN NO
EVENT SHALL NEXTEL BE LIABLE FOR
ACTUAL DAMAGES OR FOR CONSEQUENTIAL,
INCIDENTAL, SPECIAL OR OTHER INDIRECT
DAMAGES CAUSED BY ITS NEGLIGENCE OR
OTHERWISE, NOR FOR ECONOMIC LOSS,
PERSONAL INJURIES OR PROPERTY DAMAGE
SUSTAINED BY CUSTOMER OR ANY THIRD
PARTIES. IF CUSTOMER IS PROVIDED WITH A
CREDIT ALLOWANCE UNDER THIS SECTION,
NEXTEL SHALL BE SUBROGATED TO ANY AND
ALL RIGHTS THAT CUSTOMER MAY HAVE
AGAINST ANY THIRD PARTY AS A RESULT OF
CUSTOMER'S LOSS OR EXPENSE, INCLUDING
BUT NOT LIMITED TO, ANY RIGHT CUSTOMER
MAY HAVE UNDER THE TELEPHONE
CONSUMER PROTECTION ACT. THIS SECTION
14 SHALL SURVIVE TERMINATION OF THIS
AGREEMENT.
136
UNDER CERTAIN CIRCUMSTANCES, SOME
JURISDICTIONS MAY NOT RECOGNIZE OR
GIVE EFFECT, IN WHOLE OR IN PART, TO
WARRANTY DISCLAIMERS AND/OR
LIMITATIONS OF REMEDIES FOR BREACH;
AND THEREFORE, TO THE EXTENT THAT THE
DISCLAIMER SET FORTH IN SECTION 13 AND
THE LIMITATION OF REMEDIES IN SECTION 14
ARE NOT PERMITTED BY APPLICABLE LAW,
THEY WILL NOT APPLY TO CUSTOMER OR
SHALL ONLY APPLY TO THE EXTENT
PERMITTED BY SUCH APPLICABLE LAW.
15. INDEMNIFICATION - Customer shall
indemnify, defend, and hold Nextel harmless from
any violation by Customer of any applicable law or
regulation. Customer will further indemnify Nextel
for any claim or demand, including reasonable
attorneys' fees, made by any third party due to or
arising out of: (1) information or Content that
Customer submits, posts, transmits or makes
available through the Service; (2) Customer's use
of the Service or Equipment; (3) Customer's
connection to the Service or Equipment; (4)
Customer's violation of this Agreement; or (5)
Customer's violation of any rights of a third party.
16. DISPUTE RESOLUTION - THIS SECTION
PROVIDES FOR THE RESOLUTION OF MOST
DISPUTES OR CLAIMS THROUGH
ARBITRATION INSTEAD OF COURT TRIALS
AND CLASS ACTIONS. CUSTOMER SHOULD
READ THIS SECTION CAREFULLY;
ARBITRATION IS FINAL, BINDING AND
SUBJECT TO ONLY VERY LIMITED REVIEW BY
A COURT.THIS SECTION GOVERNING
DISPUTES SHALL SURVIVE TERMINATION OF
THIS AGREEMENT.
Mandatory Arbitration - CUSTOMER AND
NEXTEL AGREE TO ARBITRATE ANY CLAIM,
CONTROVERSY OR DISPUTE ARISING UNDER
OR RELATED TO THIS AGREEMENT OR ANY
EQUIPMENT USED IN CONNECTION WITH THE
SERVICE (OR ANY PRIOR ORAL OR WRITTEN
AGREEMENT FOR WIRELESS SERVICE WITH
NEXTEL) EXCEPT THAT CUSTOMER OR
NEXTEL MAY BRING AN INDIVIDUAL ACTION IN
SMALL CLAIMS COURT. CUSTOMER AND
NEXTEL ACKNOWLEDGE THAT THIS
AGREEMENT EVIDENCES A TRANSACTION IN
INTERSTATE COMMERCE AND THAT THE
FEDERAL ARBITRATION ACT SHALL GOVERN
THE INTERPREATION AND ENFORCEMENT OF
THIS ARBITRATION PROVISION. TO INITIATE
ARBITRATION, CUSTOMER OR NEXTEL MUST
FIRST SEND A WRITTEN NOTICE, VIA
CERTIFIED MAIL, TO THE OTHER PARTY
INDICATING ITS INTENT TO ARBITRATE,
WHICH NOTICE SHALL INCLUDE: (1) A
DESCRIPTION OF THE FACTS; (2) A
DESCRIPTION OF THE NATURE OF THE
CLAIM; AND (3) THE RELIEF SOUGHT ("NOTICE
TO ARBITRATE"). SEND NOTICE TO
ARBITRATE TO: NEXTEL GENERAL COUNSEL,
ARBITRATION OFFICE, 2001 EDMUND HALLEY
DRIVE, RESTON, VIRGINIA 20191. BOTH
PARTIES AGREE TO MAKE REASONABLE
ATTEMPTS TO RESOLVE ANY SUCH DISPUTE;
HOWEVER, IF THE PARTIES CANNOT
RESOLVE THE DISPUTE WITHIN FORTY-FIVE
(45) DAYS OF RECEIPT OF NOTICE TO
ARBITRATE, THEN AN ARBITRATION CLAIM
MAY COMMENCE. ANY ARBITRATION
INITIATED UNDER THIS AGREEMENT SHALL
BE ADMINISTERED BY THE AMERICAN
ARBITRATION ASSOCIATION ("AAA") IN
ACCORDANCE WITH ITS WIRELESS INDUSTRY
ARBITRATION RULES (AND THE AAA
SUPPLEMENTAL PROCEDURES FOR
CONSUMER RELATED DISPUTES AS THEY
MAY BE APPLICABLE), AS MODIFIED BY THIS
AGREEMENT. INFORMATION CONCERNING
THE AAA, ITS WIRELESS INDUSTRY
ARBITRATION RULES AND OTHER
INFORMATION CONCERNING ARBITRATION
PROCEDURES AND FEES CAN BE FOUND BY
CALLING THE AAA AT 1-800-778-7879 OR
VISITING ITS WEBSITE AT http://www.adr.org.
137
Nextel® Terms and Conditions of Service
ANY ARBITRATION SHALL BE CONDUCTED BY
A SINGLE NEUTRAL ARBITRATOR. CUSTOMER
AND NEXTEL SHALL COOPERATE IN GOOD
FAITH TO SELECT THE ARBITRATOR WITHIN
THIRTY (30) CALENDAR DAYS OF THE
COMMENCEMENT OF ANY ARBITRATION
PROCEEDING. IF CUSTOMER AND NEXTEL
CANNOT AGREE UPON A NEUTRAL
ARBITRATOR WITHIN THE THIRTY DAY
PERIOD, THEN EITHER PARTY MAY REQUEST
THAT THE AAA APPOINT, IN ITS SOLE
DISCRETION, A NEUTRAL ARBITRATOR.
CUSTOMER AND NEXTEL FURTHER AGREE
THAT NO ARBITRATOR SHALL HAVE THE
AUTHORITY TO AWARD ANY RELIEF OR
REMEDY IN EXCESS OF OR CONTRARY TO
WHAT IS PROVIDED IN THIS AGREEMENT,
EXCEPT WHERE SUCH PROVISION IS NOT
PERMITTED UNDER APPLICABLE LAW. THE
ARBITRATOR'S DECISION AND AWARD SHALL
BE FINAL AND BINDING, AND JUDGMENT ON
THE AWARD RENDERED BY THE ARBITRATOR
MAY BE ENTERED IN ANY COURT HAVING
JURISDICTION. THE LAW THAT IS APPLIED TO
THIS AGREEMENT ALSO SHALL BE APPLIED IN
ANY ARBITRATION PROCEEDING. UNLESS
THE CUSTOMER AND NEXTEL OTHERWISE
AGREE, ANY ARBITRATION SHALL BE
CONDUCTED IN THE COUNTY SEAT OF THE
COUNTY IN WHICH CUSTOMER'S BILLING
138
ADDRESS IS LOCATED. ALL ADMINISTRATIVE
COSTS AND FEES OF ARBITRATION SHALL BE
BORNE EQUALLY BY CUSTOMER AND
NEXTEL, EXCEPT IF THE CLAIM IS LESS THAN
$1000, CUSTOMER WILL BE OBLIGATED TO
PAY ONLY $25. FOR CLAIMS OVER $1,000 BUT
UNDER $75,000, CUSTOMER WILL BE
REQUIRED TO PAY ITS SHARE OF
ARBITRATION FEES, BUT NO MORE THAN THE
EQUIVALENT COURT FILING FEE FOR A
COURT ACTION FILED IN THE JURISDICTION
WHERE CUSTOMER'S BILLING ADDRESS IS
LOCATED. CUSTOMER AND NEXTEL SHALL
EACH BEAR THE EXPENSES OF THEIR OWN
COUNSEL, EXPERTS, WITNESSES AND THE
PREPARATION AND PRESENTATION OF
EVIDENCE IN CONNECTION WITH ANY
ARBITRATION.
Waiver of Jury Trial and Class Actions - BY
ENTERING INTO THIS AGREEMENT,
CUSTOMER AND NEXTEL ACKNOWLEDGE
AND AGREE TO WAIVE CERTAIN RIGHTS TO
LITIGATE DISPUTES IN COURT, TO RECEIVE A
JURY TRIAL OR TO PARTICIPATE AS A
PLAINTIFF OR AS A CLASS MEMBER IN ANY
CLAIM ON A CLASS OR CONSOLIDATED BASIS
OR IN A REPRESENTATIVE CAPACITY.
CUSTOMER AND NEXTEL BOTH AGREE THAT
ANY ARBITRATION WILL BE CONDUCTED ON
AN INDIVIDUAL AND NOT ON A
CONSOLIDATED, CLASS-WIDE OR
REPRESENTATIVE BASIS AND THAT IF
ARBITRATION IS NOT CONDUCTED ON AN
INDIVIDUAL BASIS, THIS SECTION 16 SHALL
BE DEEMED NULL AND VOID. THE
ARBITRATOR MAY AWARD INJUNCTIVE
RELIEF ONLY IN FAVOR OF THE INDIVIDUAL
PARTY SEEKING RELIEF AND ONLY TO THE
EXTENT NECESSARY TO PROVIDE RELIEF
WARRANTED BY THAT PARTY'S INDIVIDUAL
CLAIM. IF FOR ANY REASON THE
ARBITRATION CLAUSE SET FORTH IN THIS
AGREEMENT IS DEEMED INAPPLICABLE OR
INVALID, OR TO THE EXTENT THE
ARBITRATION CLAUSE ALLOWS FOR
LITIGATION OF DISPUTES IN COURT,
CUSTOMER AND NEXTEL BOTH WAIVE, TO
THE FULLEST EXTENT ALLOWED BY LAW,
ANY RIGHT TO PURSUE OR PARTICIPATE AS
A PLAINTIFF OR AS A CLASS MEMBER IN ANY
CLAIM ON A CLASS OR CONSOLIDATED BASIS
OR IN A REPRESENTATIVE CAPACITY.
17. MISCELLANEOUS - Assignment - Customer
may not assign all or any part of this Agreement
(including any of its rights and duties under the
Agreement) or sell or lease the Service to others
without Nextel's prior written consent. Nextel may
assign all or any part of this Agreement to any
successor or any other entity capable of
performing Nextel's obligations under this
Agreement without obtaining Customer's consent
or providing notice to Customer. Nextel shall be
released from all liability upon assignment of this
Agreement. Customer shall continue to be bound
by the terms of this Agreement following
assignment.
Nextel Associates - Nextel's subsidiaries, affiliates
and certain third party service providers (the
"Nextel Associates") may provide wireless
communication services in support of Nextel from
time to time. All rights and protections afforded to
Nextel by this Agreement are also afforded to the
Nextel Associates.
Notice - Notice to Customer shall be considered
delivered if sent by U.S. Mail addressed to the
most current address on file for Customer
(effective three (3) days following deposit in U.S.
Mail) or by electronic means such as email or text
messaging (effective immediately upon
transmission). Written notice to Nextel must be
sufficient to identify Customer and the Service and
shall be considered delivered when directed to
Nextel Customer Care department and received by
Nextel. Oral and electronic notice to Nextel shall be
considered delivered on the date reflected in
Nextel's records. To ensure receipt of notice,
Customer shall notify Nextel of any changes in
Customer's email or mailing address.
139
Nextel® Terms and Conditions of Service
Limitation on Third Party Beneficiaries - This
Agreement is not for the benefit of any third party
other than the Nextel Associates.
Governing Law - The laws of the state associated
with the area code assigned to Customer's Number
will govern this Agreement, without regard to the
conflicts of laws rules of that state. This Agreement
is also subject to applicable federal laws and
federal or state regulations or tariffs
Entire Agreement - This Agreement and the
policies to which it refers (e.g., Return Policy, Plan
Information, and Payment Forms, to the extent
such documentation may be applicable), form the
entire Agreement between Customer and Nextel.
There are no oral or written agreements between
Customer and Nextel other than as set forth in this
Agreement. If Customer is a business, Nextel shall
not be bound by the terms and conditions included
in Customer's purchase orders or elsewhere,
unless expressly agreed to in writing by a duly
authorized officer of Nextel. If any provision of this
Agreement is found to be illegal or otherwise
invalid, the remainder of this Agreement will remain
enforceable. If, at any time, Nextel fails to enforce
any right or remedy under this Agreement
(including, but not limited to, a waiver of Nextel's
right to written notice under the Agreement), Nextel
shall retain the right to enforce such right or
remedy at a later time.
140
Safety and General
Information
IMPORTANT INFORMATION ON SAFE AND
EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING
YOUR INTEGRATED MULTI-SERVICE
PORTABLE RADIO.
RF Operational
Characteristics
Your radio product contains a radio frequency
transmitter to convey the information you wish to
send as well as occasional automatic signals used
to sustain connection to the wireless network, and
a receiver which enables you to receive
communication and connection information from
the network.
Portable Radio Product
Operation and EME Exposure
Your Motorola radio product is designed to comply
with the following national and international
standards and guidelines regarding exposure of
human beings to radio frequency electromagnetic
energy (EME):
• United States Federal Communications
Commission, Code of Federal Regulations; 47
CFR part 2 sub-part J.
• American National Standards Institute (ANSI) /
Institute of Electrical and Electronics Engineers
(IEEE). C95. 1-1992.
• Institute of Electrical and Electronics Engineers
(IEEE). C95. 1-1999 Edition.
• International Commission on Non-Ionizing
Radiation Protection (ICNIRP) 1998.
• Ministry of Health (Canada). Safety Code 6.
Limits of Human Exposure to Radiofrequency
Electromagnetic Fields in the Frequency Range
from 3 kHz to 300 GHz, 1999.
• Australian Communications Authority
Radiocommunications (Electromagnetic
Radiation - Human Exposure) Standard 2003.
• ANATEL, Brasil Regulatory Authority,
Resolution 256 (April 11, 2001) “additional
requirements for SMR, cellular and PCS product
certification.”
To assure optimal radio product performance
and make sure human exposure to radio
frequency electromagnetic energy is within the
guidelines set forth in the above standards,
always adhere to the following procedures:
141
Safety and General Information
Phone Operation
When placing or receiving a phone call, hold your
radio product as you would a wireline telephone.
Speak directly into the microphone.
Two-way radio operation
When using your radio product as a
traditional two-way radio, hold the
radio product in a vertical position
with the microphone one to two
inches (2.5 to 5 cm) away from the lips.
Body-worn operation
To maintain compliance with FCC RF exposure
guidelines, if you wear a radio product on your
body when transmitting, always place the radio
product in a Motorola approved clip, holder,
holster, case or body harness for this product.
Use of non-Motorola-approved accessories may
exceed FCC RF exposure guidelines. If you do
not use a Motorola approved body-worn
accessory and are not using the radio product
in the intended use positions along side the
head in the phone mode or in front of the face
in the two-way radio mode, then ensure the
antenna and the radio product are kept the
following minimum distances from the body
when transmitting
142
• Phone or Two-way radio mode: one inch (2.5
cm)
• Data operation using any data feature with or
without an accessory cable: one inch (2.5
cm)
Antenna Care
Use only the supplied or an approved
replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the
radio product and may violate FCC regulations.
DO NOT hold the antenna when the radio
product is “IN USE”. Holding the antenna affects
call quality and may cause the radio product to
operate at a higher power level than needed.
Approved Accessories
For a list of approved Motorola accessories call
1-800-453-0920, or visit our website at
www.motorola.com/iden.
Portable Radio Product Operation and EME Exposure
ALL MODELS WITH FCC ID AZ489FT5830 MEET THE
GOVERNMENT’S REQUIREMENTS FOR EXPOSURE
TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radiofrequency (RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6W/kg.1 Tests for SAR are conducted using standard
operating positions reviewed by the FCC with the phone
transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum
value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that is does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the
body) as required by the FCC for each model. The highest
SAR value for this model phone when tested for use at the
ear is 1.06 W/kg and when tested on the body, as
described in this user guide, is 1.09 W/kg during packet
data transmission. (Body-worn measurements differ
among phone models, depending upon available
accessories and FCC requirements.)2
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
AZ489FT5830.
Additional information on Specific Absorption Rates (SAR)
can be found on the Cellular Telecommunications Industry
Association (CTIA) web-site at http://www.wow-com.com.
In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for any
variations in measurements.
2 The SAR information reported to the FCC includes the
FCC-accepted Motorola testing protocol, assessment
procedure, and measurement uncertainty range for this
product.
1
143
Safety and General Information
Electro Magnetic
Interference/Compatibility
Note: Nearly every electronic device is
susceptible to electromagnetic
interference (EMI) if inadequately
shielded, designed or otherwise
configured for electromagnetic
compatibility.
Facilities
To avoid electromagnetic interference and/or
compatibility conflicts, turn off your radio product in
any facility where posted notices instruct you to do
so. Hospitals or health care facilities may be using
equipment that is sensitive to external RF energy.
Aircraft
When instructed to do so, turn off your radio
product when on board an aircraft. Any use of a
radio product must be in accordance with
applicable regulations per airline crew instructions.
Medical Devices
Pacemakers
The Advanced Medical Technology Association
(AdvaMed) recommends that a minimum
separation of 6 inches (15 cm) be maintained
between a handheld wireless radio product and a
pacemaker. These recommendations are
consistent with those of the U.S. Food and Drug
Administration.
Persons with pacemakers should:
• ALWAYS keep the radio product more than 6
inches (15 cm) from their pacemaker when the
radio product is turned ON.
• Not carry the radio product in a breast pocket.
• Use the ear opposite the pacemaker to minimize
the potential for interference.
• Turn the radio product OFF immediately if you
have any reason to suspect that interference is
taking place.
Hearing Aids
Some digital wireless radio products may interfere
with some hearing aids. In the event of such
interference, you may want to consult your hearing
aid manufacturer to discuss alternatives.
144
Operational Warnings
Other Medical Devices
Potentially Explosive Atmospheres
If you use any other personal medical device,
consult the manufacturer of your device to
determine if it is adequately shielded from RF
energy. Your physician may be able to assist you
in obtaining this information.
Turn off your radio product prior to entering any
area with a potentially explosive atmosphere,
unless it is a radio product type especially qualified
for use in such areas as “Intrinsically Safe” (for
example, Factory Mutual, CSA, or UL approved).
Do not remove, install, or charge batteries in such
areas. Sparks in a potentially explosive
atmosphere can cause an explosion or fire
resulting in bodily injury or even death.
Operational Warnings
Use While Driving
!
Check the laws and regulations on the use of radio
products in the area where you drive. Always obey
them.
When using the radio product while driving, please:
• Give full attention to driving and to the road.
• Use hands-free operation, if available.
• Pull off the road and park before making or
answering a call if driving conditions so require.
For Vehicles with an Air Bag
Do not place a portable radio product in the area
over the air bag or in the air bag deployment area.
Air bags inflate with great force. If a portable radio
is placed in the air bag deployment area and the air
bag inflates, the radio product may be propelled
with great force and cause serious injury to
occupants of the vehicle.
Note: The areas with potentially explosive
atmospheres referred to above include
fueling areas such as below decks on
boats, fuel or chemical transfer or
storage facilities, areas where the air
contains chemicals or particles, such
as grain, dust or metal powders, and
any other area where you would
normally be advised to turn off your
vehicle engine. Areas with potentially
explosive atmospheres are often but
not always posted.
Blasting Caps and Areas
To avoid possible interference with blasting
operations, turn off your radio product when you
are near electrical blasting caps, in a blasting area,
or in areas posted: “Turn off two-way radio”. Obey
all signs and instructions.
145
Safety and General Information
Operational Cautions
Batteries
!
All batteries can cause property damage and/or
bodily injury, such as burns if a conductive material
such as jewelry, keys, or beaded chains touches
exposed terminals. The conductive material may
complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any
charged battery, particularly when placing it inside
a pocket, purse, or other container with metal
objects. To reduce the risk of injury, batteries
should not be exposed to fire, disassembled, or
crushed.
Cleaning and Drying Considerations
Using a leather carry case may help protect the
surfaces and help prevent liquids (e.g., rain) from
entering into the interior of the radio product. This
product is not water proof, and exposing the unit to
liquids may result in permanent damage to the unit.
If your radio product interior gets wet, then do not
try to accelerate drying with the use of an oven or a
dryer as this will damage the radio product and
void the warranty. Instead, do the following:
1 Immediately power off the radio product.
2 Remove Battery and SIM card (if so equipped)
from radio product.
146
3 Shake excess liquid from radio product.
4 Place the radio product and battery in an area
that is at room temperature and has good air
flow.
5 Let the radio product, battery, and SIM card dry
for 72 hours before reconnecting the battery
and/or powering on the radio product.
If the radio product does not work after following
the steps listed above, contact your dealer for
servicing information.
Clean the external surfaces of the radio product
with a damp cloth, using a mild solution of
dishwashing detergent and water. Some
household cleaners may contain chemicals that
could seriously damage the radio product. Avoid
the use of any petroleum-based solvent cleaners.
Also, avoid applying liquids directly on the radio
product.
Intrinsically Safe Radio Information
Intrinsically Safe Radio
Information
The Intrinsically Safe Approval unit refers to a
product that has been approved as intrinsically
safe by an approval agency (for example FM, CSA)
and certifies that a particular product meets the
Agency's applicable Intrinsic Safety standards for
specific types of hazardous classified locations. A
portable radio that has been approved for Intrinsic
Safety will have an Approval label attached to the
radio to identify the unit as being Approved for
specified hazardous atmospheres. This label
specifies the hazardous Class/Division/Group
along with the part number of the battery that must
be used. The Intrinsically Safe Approval Label will
be located on the portable radio unit.
Operational Cautions for Intrinsically
Safe Equipment
!
• Do not operate radio communications
equipment in hazardous environments
unless it is a type especially qualified
(e.g., FM/CSA Approved) for such use.
An explosion or fire may result.
• Do not operate an FM/CSA Approved
Product in a hazardous atmosphere if it
has been physically damaged (e.g.,
cracked housing). An explosion or fire
may result.
• Do not replace or charge batteries in a
hazardous atmosphere. Contact sparking
may occur while installing or removing
batteries and cause an explosion or fire.
Intrinsically Safe Approval Label
147
Safety and General Information
Warnings for Radios Approved as
Intrinsically Safe
Portable radio products must ship from the
Motorola manufacturing facility with the hazardous
atmosphere capability and the intrinsic safety
approval labeling (FM, CSA, CEPEL, etc). Portable
radio products will not be upgraded to this
capability and labeled once they have been
shipped to the field.
A modification changes the unit’s hardware from its
original design configuration. Modifications can
only be made by the original product manufacturer.
!
148
• Do not replace or change accessories in
a hazardous atmosphere. Contact
sparking may occur while installing or
removing accessories and may cause an
explosion or fire.
• Turn the radio communications
equipment off before removing or
installing a battery or accessory.
• Do not disassemble the FM/CSA
Approved Product unit in any way that
exposes the internal electrical circuits of
the unit.
!
• Failure to use an FM/CSA Approved
Portable Radio Product with the specific
approved battery or accessories may
result in a dangerously unsafe condition
when being used in a hazardous
environment.
• Unauthorized or incorrect modification of
an Intrinsically Safe approved portable
radio product can negate the FM or CSA
Approval for that radio unit.
• Incorrect repair or relabeling of any
intrinsically safe Agency-approved radio
could adversely affect the Approval rating
of the unit.
• Use of a radio that is not intrinsically safe
in a hazardous atmosphere could result in
serious injury or death.
Intrinsically Safe Radio Information
Repair
!
REPAIRS FOR MOTOROLA PRODUCTS
WITH INTRINSICALLY SAFE APPROVAL
ARE THE RESPONSIBILITY OF THE
USER.
Repairs to a Motorola FM approved radio
product should only be done at a
location that has been FM audited under
the FM 3605 repairs and service
standard.
Contact Motorola for assistance
regarding repairs and service of
Motorola intrinsically safe equipment.
A repair constitutes something done internally to
the unit that would bring it back to its original
condition.
Items not considered as repairs are those in which
an action is performed on a unit which does not
require the outer casing of the unit to be opened in
a manner that exposes the internal electrical
circuits of the unit.
Do Not Substitute Options or Accessories
The Motorola communications equipment certified
as intrinsically safe by the approving agency, (FM,
UL, CSA, CENELEC) is tested as a complete
system which consists of the listed agency
Approved portable, Approved battery, and
Approved accessories or options, or both. This
Approved portable and battery combination must
be strictly observed. There must be no substitution
of items, even if the substitute has been previously
Approved with a different Motorola
communications equipment unit. Approved
configurations are listed by the Approving Agency
(FM, UL, CSA, CENELEC).
The Intrinsically Safe Approval Label affixed to
radio refers to the intrinsically safe classification of
that radio product, and the approved batteries that
can be used with that system.
The manual PN referenced on the Intrinsically Safe
Approval Label identifies the approved
Accessories and or options that can be used with
that portable radio unit.
Using a non Motorola intrinsically safe battery and
or accessory with the Motorola approved radio unit
149
Safety and General Information
will void the intrinsically safe approval of that radio
unit.
Accessory Safety Information
Important: Save these accessory safety
instructions.
• Before using any battery or battery charger, read
all the instructions for and cautionary markings
on (1) the battery, (2) the battery charger, which
may include a separate wall-mounted power
supply or transformer, and (3) the radio product
using the battery.
• Do not expose any battery charger to water,
rain, or snow as they are designed for indoor or
in-vehicle use only.
!
150
Warning: To reduce the risk of injury,
charge only the rechargeable
batteries described in “Battery Use
and Maintenance” on page 5. Other
types of batteries may burst, causing
personal injury and damage.
• To reduce the risk of damage to the cord or plug,
pull by the plug rather than the cord when you
disconnect the battery charger from the power
source outlet.
• Do not operate any battery charger with a
damaged cord or plug — replace them
immediately.
• Battery chargers may become warm during
operation, but not hot. If it becomes hot to the
touch, unplug it from the power outlet
immediately and discontinue its use.
• Use of a non-recommended attachment to a
battery charger may result in a risk of fire,
electric shock, or injury to persons.
• Make sure the battery charger power cord is
located so that it will not be stepped on, tripped
over, or subjected to damage or stress.
• An extension cord should not be used with any
battery charger unless absolutely necessary.
Use of an improper extension cord could result
in a risk of fire and electric shock. If an extension
cord must be used, make sure that:
• The pins on the plug of the extension cord are
the same number, size, and shape as those
on the plug of the charger.
• The extension cord is properly wired and in
good electrical condition.
Accessory Safety Information
•
•
•
•
•
•
• The cord size is 18AWG for lengths up to 100
feet and 16AWG for lengths up to 150 feet.
Do not operate any battery charger if it has
received a sharp blow, has been dropped, or
has been damaged in any way; take it to a
qualified service technician.
Do not disassemble a battery charger; take it to
a qualified service technician when service or
repair is required. Incorrect reassembly may
result in a risk of electric shock or fire.
Maximum ambient temperature around the
power supply or transformer of any battery
charger should not exceed 40°C (104°F).
The output power from the power supply or
transformer must not exceed the rating given on
the Desktop Dual-Pocket Charger.
The disconnection from the line voltage is made
by unplugging the power supply from the AC
receptacle.
To reduce risk of electric shock, unplug any
battery charger from the outlet before attempting
any maintenance or cleaning.
For optimum charging performance, turn off the
radio product while charging it in any battery
charger.
151
MOTOROLA LIMITED
WARRANTY
Note: FOR IDEN SUBSCRIBER PRODUCTS,
ACCESSORIES AND SOFTWARE
PURCHASED IN THE UNITED STATES
OR CANADA
PRODUCTS
COVERED
LENGTH OF
COVERAGE
Products as defined
above.
One (1) year from the
date of purchase by the
first consumer
purchaser of the
product.
Accessories as
defined above.
One (1) year from the
date of purchase by the
first consumer
purchaser of the
product.
What Does this Warranty Cover?
Subject to the exclusions contained below,
Motorola, Inc. warrants its Motorola iDEN Digital
Mobile and Portable Handsets ("Products"),
Motorola-branded or certified accessories sold for
use with these Products ("Accessories") and
Motorola software contained on CD-Roms or other
tangible media and sold for use with these
Products ("Software") to be free from defects in
materials and workmanship under normal
consumer usage for the period(s) outlined below.
This limited warranty is a consumer's exclusive
remedy, and applies as follows to new
Products, Accessories and Software
purchased by consumers in the United States
or Canada, which are accompanied by this
written warranty:
152
Products or
The balance of the
Accessories that are original warranty or
Repaired or Replaced. for ninety (90) days
from the date returned
to the consumer,
whichever is longer.
Software as defined
Ninety (90) days from
above. Applies only to the date of purchase.
physical defects in the
media that embodies
the copy of the software
(e.g. CD-ROM, or
floppy disk).
What is not covered? (Exclusions)
Normal Wear and Tear. Periodic maintenance,
repair and replacement of parts due to normal wear
and tear are excluded from coverage.
Batteries. Only batteries whose fully charged
capacity falls below 80% of their rated capacity and
batteries that leak are covered by this limited
warranty.
Abuse & Misuse. Defects or damage that result
from: (a) improper operation, storage, misuse or
abuse, accident or neglect, such as physical
damage (cracks, scratches, etc.) to the surface of
the product resulting from misuse; (b) contact with
liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or
food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or
Accessory to abnormal usage or conditions; or (d)
other acts which are not the fault of Motorola, are
excluded from coverage.
Use of Non-Motorola Products and
Accessories. Defects or damage that result from
the use of Non-Motorola branded or certified
Products, Accessories, Software or other
peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects
or damages resulting from service, testing,
adjustment, installation, maintenance, alteration,
including without limitation, software changes, or
modification in any way by someone other than
Motorola, or its authorized service centers, are
excluded from coverage.
Altered Products. Products or Accessories with
(a) serial numbers or date tags that have been
removed, altered or obliterated; (b) broken seals or
that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or
non-Motorola housings, antennas, or parts, are
excluded from coverage.
Communication Services. Defects, damages, or
the failure of Products, Accessories or Software
due to any communication service or signal you
may subscribe to or use with the Products,
Accessories or Software is excluded from
coverage.
Software Embodied in Physical Media. No
warranty is made that the software will meet your
requirements or will work in combination with any
hardware or software applications provided by third
parties, that the operation of the software products
will be uninterrupted or error free, or that all defects
in the software products will be corrected.
153
MOTOROLA LIMITED WARRANTY
Software NOT Embodied in Physical Media.
Software that is not embodied in physical media
(e.g. software that is downloaded from the
internet), is provided "as is" and without warranty.
Who is covered? This warranty extends only to
the first consumer purchaser, and is not
transferable.
What will Motorola Do? Motorola, at its option,
will at no charge repair, replace or refund the
purchase price of any Products, Accessories or
Software that does not conform to this warranty.
We may use functionally equivalent
reconditioned/refurbished/pre-owned or new
Products, Accessories or parts. No data, software
or applications added to your Product, Accessory
or Software, including but not limited to personal
contacts, games and ringer tones, will be
reinstalled. To avoid losing such data, software
and applications please create a back up prior to
requesting service.
How to Obtain Warranty Service or Other
Information? To obtain service or information,
please call:
Motorola iDEN Customer Services
1-800-453-0920 or 954-723-4910
TTY-877-483-2840
154
Or visit us online at
http://www.motorola.com/iden/support
You will receive instructions on how to ship the
Products, Accessories or Software, at your
expense, to a Motorola Authorized Repair Center.
To obtain service, you must include: (a) a copy of
your receipt, bill of sale or other comparable proof
of purchase; (b) a written description of the
problem; (c) the name of your service provider, if
applicable; (d) the name and location of the
installation facility (if applicable) and, most
importantly; (e) your address and telephone
number.
What Other Limitations Are There? ANY
IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED
TO THE DURATION OF THIS LIMITED
WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED
UNDER THIS EXPRESS LIMITED WARRANTY IS
THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OF
IMPLIED. IN NO EVENT SHALL MOTOROLA BE
LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, ACCESSORY OR SOFTWARE, OR
FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR
LOSS OF REVENUE OR PROFITS, LOSS OF
BUSINESS, LOSS OF INFORMATION OR DATA,
SOFTWARE OR APPLICATIONS OR OTHER
FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE ABILITY OR INABILITY
TO USE THE PRODUCTS, ACCESSORIES OR
SOFTWARE TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
software. No other use, including without limitation
disassembly of such Motorola software or exercise
of the exclusive rights reserved for Motorola, is
permitted.
Some states and jurisdictions do not allow the
limitation or exclusion of incidental or
consequential damages, or limitation on the
length of an implied warranty, so the above
limitations or exclusions may not apply to you.
This warranty gives you specific legal rights,
and you may also have other rights that vary
from state to state or from one jurisdiction to
another.
Laws in the United States and other countries
preserve for Motorola certain exclusive rights for
copyrighted Motorola software such as the
exclusive rights to reproduce and distribute copies
of the Motorola software. Motorola software may
only be copied into, used in, and redistributed with,
the Products associated with such Motorola
155
Limited Warranty Motorola Communication Products (International)
Limited Warranty
Motorola
Communication
Products (International)
Note: This Warranty applies in Singapore and
the Philippines.
I. What This Warranty Covers
and For How Long:
MOTOROLA warrants the MOTOROLA
manufactured iDEN Communication Products
listed below (“Product”) against defects in material
and workmanship under normal use and service
for a period of time from the date of purchase as
scheduled below:
iDEN Subscriber Digital Mobile and One (1) Year
Portable Units
Product Accessories
One (1) Year
(manufactured by or under license
from MOTOROLA)
Batteries
156
One (1) Year
Rechargeable Batteries will be replaced during the
applicable warranty period if:
a. the battery capacity falls below 80% of rated
capacity, or
b. the battery develops leakage.
MOTOROLA, at its option, will at no charge either
repair the Product (with new or reconditioned
parts), replace it (with a new or reconditioned
Product), or refund the purchase price of the
Product during the warranty period provided it is
returned in accordance with the terms of this
warranty. Replaced parts or boards are warranted
for the balance of the original applicable warranty
period. All replaced parts of Product shall become
the property of MOTOROLA.
This express limited warranty is extended by
MOTOROLA to the original end user purchaser
only and is not assignable or transferable to any
other party. This is the complete warranty for the
Product manufactured by MOTOROLA.
MOTOROLA assumes no obligations or liability for
additions or modifications to this warranty unless
made in writing and signed by an officer of
MOTOROLA. Unless made in a separate
agreement between MOTOROLA and the original
end user purchaser, MOTOROLA does not warrant
the installation, maintenance or service of the
Product.
MOTOROLA cannot be responsible in any way for
any ancillary equipment not furnished by
MOTOROLA which is attached to or used in
connection with the Product, or for operation of the
Product with any ancillary equipment, and all such
equipment if expressly excluded from this
warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims
liability for range, coverage, or operation of the
system as a whole, or any portion of the system not
produced by MOTOROLA, under this warranty.
II. General Provisions:
This warranty sets forth the full extent of
MOTOROLA’S responsibilities regarding the
Product, Repair, replacement or refund of the
purchase price, at MOTOROLA’S options, is the
exclusive remedy. THIS WARRANTY IS GIVEN
IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. IMPLIED WARRANTIES,
INLCUDING WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY TO THE FULL EXTENT SUCH MAY
BE DISCLAIMED BY LAW. IN NO EVENT SHALL
MOTOROLA BE LIABLE FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL LOSS,
LOST PROFITS OR SAVINGS OR OTHER
INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE SUCH PRODUCT, TO THE
FULL EXTENT SUCH MAY BE DISCLAIMED BY
LAW.
III. How to Get Warranty
Service:
You must provide proof of purchase (bearing the
date of purchase and Product item serial number)
in order to receive warranty service and, also,
deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty
service location. Warranty service will be provided
by MOTOROLA through one of its authorized
warranty service locations. If you first contact the
company which sold you the Product (e.g., dealer
or communication service provider), it can facilitate
your obtaining warranty service.
IV. What This Warranty Does
Not Cover:
a. Defects or damage resulting from use of the
Product in other than its normal and customary
manner.
157
Limited Warranty Motorola Communication Products (International)
b. Defects or damage from misuse, accident,
water, or neglect.
c. Defects or damage from improper testing,
operation, maintenance, installation, alteration,
modification, or adjustment.
d. Breakage or damage to antennas unless
caused directly by defects in material
workmanship.
e. A Product subjected to unauthorized Product
modifications, disassemblies or repairs
(including, without limitation, the audition to the
Product of non-MOTOROLA supplied
equipment).
f. Product which has had the serial number
removed or made illegible.
g. Rechargeable batteries if:
1.Any of the seals on the battery enclosure of
cells are broken or show evidence of
tampering.
2.The damage or defect is caused by
charging or using the battery in equipment
or service other than the Product for which it
is specified.
h. Freight costs to the repair depot.
i. A Product which, due to illegal or unauthorized
alteration of the software/firmware in the
Product, does not function in accordance with
158
MOTOROLA’S published specifications or the
local type acceptance labeling in effect for the
Product at the time the Product was initially
distributed from MOTOROLA.
j. Scratches or other cosmetic damage to
Product surfaces that does not effect the
operation of the Product.
k. Normal and customary wear and tear.
l. Exclusion for defects or damage arising from
use of the products in connection with
non-MOTOROLA equipment.
VI. Patent and Software
Provisions:
MOTOROLA will defend, at its own expense, any
suit brought against the end user purchaser to the
extent that it is based on a claim that the Product or
parts infringe a patent, and Motorola will pay those
costs and damages finally awarded against the
end user purchaser in any such suit which are
attributable to any such claim, but such defense
and payments are conditioned on the following:
a. That MOTOROLA will be notified promptly in
writing by such purchaser of any notice of such
claim;
b. That MOTOROLA will have sole control of the
defense of such suit and all negotiations for its
settlement or compromise; and
c. Should the Product or parts become, or in
MOTOROLA’S opinion be likely to become, the
subject of a claim of infringement of a patent,
that such purchaser will permit MOTOROLA, at
its option and expense, either to procure for
such purchaser the right to continue using the
Product or parts or to replace or modify the
same so that it becomes non-infringing or to
grant such purchaser a credit for the Product or
parts as depreciated and accept its return. The
depreciation will be an equal amount per year
over the lifetime of the Product or parts as
established by MOTOROLA.
MOTOROLA will have no liability with respect to
any claim of patent infringement which is based
upon the combination of the Product or parts
furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will
MOTOROLA have any liability for the use of
ancillary equipment or software not furnished by
MOTOROLA which is attached to or sued in
connection with the Product or any parts thereof. In
no event shall MOTOROLA be liable for any
incidental, special or consequential damages
arising from any claim of patent infringement or
alleged infringement.
Laws in the United States and other countries
preserve for MOTOROLA certain exclusive rights
for copyrighted MOTOROLA software, such as the
exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software.
MOTOROLA software may be used in only the
Product in which the software was originally
embodied and such software in such Product may
not be replaced, copied, distributed, modified in
any way, or used to produce any derivative thereof.
No other use including, without limitation,
alteration, modification, reproduction, distribution,
or reverse engineering of such MOTOROLA
software or exercise or rights in such MOTOROLA
software is permitted. No license is granted by
implication, estoppel or otherwise under
MOTOROLA patent rights or copyrights.
159
Patent and Trademark
Information
© 2004 Nextel Communications, Inc. NEXTEL®,
the NEXTEL logo , NEXTEL ONLINE , NEXTEL.
Done.TM, PUSH TO TALKTM, PTTTM, DIRECT
CONNECT®, GROUP CONNECTTM and NEXTEL
WORLDWIDE® are service marks, trademarks,
and/or registered trademarks owned by Nextel
Communications, Inc.
®
®
MOTOROLA, the Stylized M Logo and all other
trademarks indicated as such herein are
trademarks of Motorola, Inc. ® Reg. U.S. Pat. &
Tm. Off. © 2004 Motorola, Inc. All rights reserved.
Microsoft and Microsoft Internet Explorer are
registered trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic
Communications.
T9® Text Input Patent and Trademark Information
This product is covered by U.S. Pat. 5,818,437,
U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other
patents pending.
Java and all other Java-based marks are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
160
All other product names or services mentioned in
this manual are the property of their respective
trademark owners.
Software Copyright Notice
The Motorola products described in this manual
may include copyrighted Motorola and third party
software stored in semiconductor memories or
other media. Laws in the United States and other
countries preserve for Motorola and third party
software providers certain exclusive rights for
copyrighted software, such as the exclusive rights
to distribute or reproduce the copyrighted software.
Accordingly, any copyrighted software contained in
the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in
any manner to the extent allowed by law.
Furthermore, the purchase of the Motorola
products shall not be deemed to grant either
directly or by implication, estoppel, or otherwise,
any license under the copyrights, patents, or patent
applications of Motorola or any third party software
provider, except for the normal, non-exclusive,
royalty-free license to use that arises by operation
of law in the sale of a product.
Index
A
Accessories 17
safety 150
Alpha mode 36
Antenna 6
attaching 6
removing 6
B
Backlight 103
Battery
care 5
charging 4
door 2
inserting 3
safety 146
Baud rate 106
C
Call alerts 26
deleting 27
queue 26
receiving 26
responding 26, 27
sending 26
sorting 27
viewing 26
Call filtering 110
Call forwarding
all calls 47
missed calls 48
off 48
Call Hold 51
Call Timers 57
Call Waiting 50
off 50
Calls
answering automatically 103
answering with any key 103
Direct Connect 20, 24, 104
emergency calls 24
ending 21
from contacts 22
from memo 46
from recent calls 22
from SMS messages 79
Group Connect, see Group
Connect calls
icons 21
international 52
making 20
on hold 51
phone calls 20
receiving 21
redialing 23, 103
remote PTT 114
speed dial 23
TTY, see TTY calls
turbo dial 23
voice name 23
Circuit data 58
Clock 103
Contacts 22
capacity 44
creating entries 41
deleting 43
editing entries 43
icons 39
international numbers 45
searching 40
showing all entries 41
showing only Direct Connect
40
SIM card 39
161
Index
storing fast 43
storing from idle screen 43
storing from memo 43, 46
storing from recent calls 34,
43
type 34, 39
viewing 40
Customer Care 115
D
DC/GC Options 104
see also Direct Connect calls,
Group Connect calls, and
call alerts
Dialing codes
non-emergency numbers 60
telecommunications relay
service 60
Direct Connect
see also calls
one touch 24
One Touch, setting 52
Direct Launch 32
Direct Talk 28
channels 29
codes 29
162
emergency calls 32
private Direct Talk calls 31
setup options 32
talk range 29
Display
backlight 103
colors 103
contrast 103
options 9
screen 9
E
Email 39, 42, 58
Emergency calls 24
Emergency Group Connect calls
56
ending 57
making 56
receiving 57
End key 1
F
Faxes
receiving 58
sending 58
G
GPS Enabled
emergency calls 25
GPS enabled 93
almanac data 98
best results 96
emergency calls 94
map software 99
privacy options 98
security 99
viewing location 95
GPS PIN 105
GPS, see GPS Enabled
Group Connect calls 104
see also Emergency Group
Connect calls
making 55
off 55
receiving 55
H
Handset, see phone
Headset 114
I
M
Icons
calls 21
contacts 39
main menu 10
recent calls 34
status 12
text entry 36
Idle screen 9
storing to contacts 43
International numbers 52
calling 52
storing 45
Memo 46
calling from 46
creating 46
editing 46
storing to contacts 43, 46
viewing 46
Memory
Java applications 89
ring tones 65
voice records 85, 86
Menu key 1, 10
Menus 10
context-sensitive 1, 10
main menu 10
Message center 67, 69
see also messages
net alerts 80
SMS messages 78
voice mail 69
Message notifications 67
setting options 67
Messages 66
J
Java applications
deleting 89
memory 89
K
Keypad 1
locking 16, 105
L
Language 103
Lists, see menus
see also voice mail, SMS
messages, Two-Way
messages, and Net alerts
receiving 67
Mute 24
N
Navigation key 1
Net alerts 79
deleting 80
message center 80
receiving 79
Nextel
Customer Care 115
Online services 82
Terms and conditions 119
Non-emergency numbers 60
Numeric mode 38
O
Off-Network Walkie-Talkie 28
P
Packet data 58
Password
voice mail 71
163
Index
Passwords 105
Patent information 160
Pauses
dialing 52
storing 44
Phone 1, 9
active line 103
care 6
locking 105
modem 58
off 7
on 6
setting up 2
Profiles 107
call filtering 110
changing settings 108
creating 109
deleting 110
editing 110
surveillance 108
switching 107
temporary 108
viewing 107
PUK code 14
164
R
Radio frequency 141
Recent calls 22, 34
deleting 35
display time 106
icons 34
storing to contacts 34, 43
viewing 34
Redialing 23, 103
Ring tones 39, 63
deleting 65
downloading 65
memory 65
off 63
setting 63
setting in contacts 41, 64
vibrate 63
viewing assigned 64
Ringer 102
see also Ring tones
off 102
S
Safety 141
accessory 150
battery 146
electromagnetic interference
144
intrinsically safe 147
medical devices 144
radio frequency 141
Scangroups 53
joining 54
setting up 53, 54
viewing 54
Security 105
Send key 1
Service, activating 7
Settings 103
resetting 106
Shortcuts
creating 112
deleting 113
editing 113
using 112
SIM card 3, 13, 15
contacts 39
inserting 15
removing 16
SIM PIN 13, 105
changing 14
requirement 13
unblocking 14
SMS messages 78
calling from 79
message center 78
receiving 78
Speakerphone 24
Speed Dial 23, 40, 42
State Tone 32
Status messages 117
Surveillance profile 108
Symbols mode 38
T
T9 Text Input, see text entry
Talkgroup Scan 55
Talkgroups 53, 104
setting up 53
TDD/TTY devices 60
Telecommunications relay
service 60
Terms and conditions 119
Text and numeric messages
see SMS messages
Text display area 9, 21
Text entry 36
alpha mode 36
database 36, 37
icons 36
mode 36
numeric mode 38
symbols mode 38
word mode 36
Text messages
reading 79
Trademark information 160
TTY calls 59
baud rate 60
making 59
mode 59
on 59
TTY devices 60
Turbo Dial 23
Two-Way messages 79
receiving 79
sending 80
V
changing password 71
greetings 72
group lists 75
message forwarding 76
playing messages 70
receiving 69
sending calls to 21
setting up 9, 70
Voice name 23, 40
Voice records 84
creating 84
deleting 85
labelling 85
locking 85
memory 85, 86
playing 84
Volume, setting 102, 104
W
Waits
dialing 52
storing 44
Warranty 156
Word mode 36
Voice mail 69
165
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising