- No category
advertisement
▼
Scroll to page 2
of 3
SC-414 Cinema Loudspeaker System SC-414 Features •4-way selectable, tri or quadamplified screen channel system •Unique HF/VHF diaphragm has less mass than traditional diaphragms resulting in exceptional dynamic range, extended high frequency response and lower distortion •LF-4115 is constructed of MDF and is heavily braced •Low-distortion waveguides provide highly articulate dialogue •Shallow depth (20”) facilitates installation •THX™ approved for professional cinema applications Developed specifically for the unique requirements of professional motion picture playback, the SC-414 extends QSC’s commitment to the cinema market. As a member of the DCS Digital Cinema Speaker Series, the SC-414 is a 4-way, selectable tri or quad-amplified screen channel loudspeaker system comprised of two main units — the MHV-1090 mid-high-very highfrequency system and the LF-4115 lowfrequency system. The MHV-1090 mid-high-very high system features a high output, horn loaded 10” midrange cone driver and a coaxial neodymium high-frequency/very highfrequency compression driver. The MHV1090 includes a driver protection network and a passive crossover for tri-amp operation. The protection circuitry prevents low-frequency signals from damaging the high-frequency and very high-frequency driver. A high power 10” cone driver allows operation as low as 250 Hz and the advanced phase plug coupling permits a crossover point of up to 1800 Hz to the high-frequency horn. This ensures that most of the dialog range is reproduced by a single element for unmatched intelligibility. The coaxial neodymium high-frequency/very high-frequency compression driver provides a dramatic improvement in dynamic response, clarity and transparency. The annular high-frequency diaphragm covers the frequency range between 1800 and 7000 Hz with a smooth, linear response. The large diaphragm excursion of +/-0.8 mm results in high output and increased power handling. The very high-frequency driver covers the frequency range from 7,000 to 22,000 Hz and eliminates the dome break up of conventional drivers that can cause resonance and harsh, metallic sound. The LF-4115 single 15” (381 mm) lowfrequency enclosure is designed specifically to address the extended low-frequency response required for cinema applications. The LF-4115 covers the frequency range from 35 Hz to 250 Hz. The SC-414 is designed for ease of installation. The MHV-1090 components come pre-assembled to reduce field assembly time. Three bolts are all that are required to secure the MHV-1090 to the top of the LF-4115 enclosure. SC-414 Details Specifications SC-414 Nominal Coverage 90° horizontal x +20 to -30° vertical Frequency Range (-6 dB) 33Hz – 20 kHz Active Crossover Frequencies 250, 1700 and 6000 Hz, 24 dB per octave LF-4115 MHV-1090 Impedance 4Ω MF: 8Ω HF: 8Ω VHF: 8Ω Sensitivity 1 watt /1 meter, half space 98.5 dB Tri-amp MF:105 dB HF/VHF: 110 dB Quad-amp MF: 105 dB HF: 110 dB VHF: 110 dB 8 hours of 6 dB crest factor 400 W RMS IEC 268 noise spectrum MF: 275 W RMS HF/VHF: 230 W RMS MF: 275 W RMS HF: 150 W RMS VHF: 80 W RMS 2 hours of 6 dB crest factor 500 W RMS pink noise, 50 Hz – 20 kHz, AES method MF: 800 W RMS HF/VHF: 500 W RMS maximum Recommended Amplifier Power 800 W RMS maximum MF: 800 W RMS HF: 500 W RMS VHF: 300 W RMS maximum Recommended Processing Subsonic filter below 30 Hz, >18 dB per octave 4th order LR crossover at 250, 1700 and 6000 Hz via QSC processor Connectors Barrier strip screw terminals accept up to #10 AWG stranded wire Transducers ne 15" (381mm) high efficiency, extended O bass woofer featuring a 4" copper voice coil MF: 10" high-efficiency, horn-loaded cone with phase plug HF/VHF: coaxial neodymium compression driver with 3.5" (90 mm) HF diaphragm and 1.75" (44 mm) VHF diaphragm Enclosure Quasi B4 alignment, ported enclosure with fully flared ports, symmetrical port design, tuned to 36 Hz, constructed of MDF and heavily braced. Features vandal resistant woofer mounting bolts Tilt/Pan Bracket ±10° vertical tilt ±10° horizontal pan Dimensions (HWD) 18.5" x 30" x 20.3" (470 mm x 762 mm x 516 mm) 39" x 30" x 20" (990 mm x 762 mm x 508 mm) Weight – Net 83 lb (38 kg) 84 lb (38.5 kg) Maximum Input Power1 System Weight 167 lb (76.5 kg) Baffle Cut-Out 58.75" x 32" 1) Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz – 20 kHz band limiting, 6 dB signal crest factor. SC-414 Technical Drawing Top 21.7" 551 mm 20.3" 516 mm 30" 762 mm 39" 990 mm 57.63" 1463.8 mm Side 4" 102 mm 10.45" 265 mm 18.63" 473.2 mm Front Specifications subject to change without notice. 1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174 © 2013 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. SC-414 Spec Sheet 02/06/2013 please recycle
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project