FWA-6500 Multi-Core x86 Intel® Dual Xeon® processor Startup Manual

FWA-6500 Multi-Core x86 Intel® Dual Xeon® processor  Startup Manual
FWA-6500 Multi-Core x86 Intel® Dual Xeon® processor
5500 series 2U Network Application Platform
Startup Manual
Specifications
Packing List
Before you begin installing your card, please make sure that
the following items have been shipped:
• One FWA-6500 Internet Security Platform
• One box of accessories
• One warranty certificate
If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
Note 1: Acrobat Reader is required to view any PDF
file.Acrobat Reader can be downloaded at:
www.adobe.com/Products/acrobat/readstep2.
html (Acrobat is a trademark of Adobe)
Main Board Functions
• CPU: Intel® Xeon® 5500 series Dual/Quad core processor
• Chipset: Intel® 5520 (Tylersburg-EP) and ICH10R
• BIOS: AMI™
• QPI: up to 6.4 GT/s
• Memory: DDR3 1066/1333 ECC registered memory, up
to 96 GB memory capacity.
• PCIe Bus:
- 4 x Gen 2, PCIe x8 connected to express module
- 1 x Gen 1, PCIe x4 connected to management board
- 1 x Gen 1, PCIe x4 slot (for riser card)
- 1 x Gen 2, PCIe x4 slot (for riser card)
• CF Interface: JMicron (SATA to IDE bridge) 1 x CF socket
• Storage: 2 x 2.5” removable SATA HDD docks (2 x 3.5”
removable SATA HDD docks for option)
• Remote Management: Supportc Hitachi H8 BMC, compliant with IPMI 2.0
• Peripherals:
- USB
2 x USB 2.0 ports on front panel
- Serial
1 x front console port RJ45
- LCD module
1
•
•
•
•
Dimensions (W x H x D): 430 x 80 x 547.6 mm
Weight: 18Kg (40lb)
Environment:
Operating
Non-Operating
Temperature:
0° C ~ 40° C
-20° C ~ 75° C
(32° F ~ 104° F) (-4° F ~ 167° F)
• Humidity:
5~85%@40° C 5~95%
(104° F)
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com.tw/support
http://www.advantech.com
For technical support and service, please visit our
support website at:
http://www.advantech.com/support
This manual is for the FWA-6500 series Rev. B
Part No. 2002650001
Print in China
2nd Edition,
April 2010
FWA-6500 Startup Manual Specifications
Installation
Express Modules
Installing the CPUs
• Interface:
- GE Express Module:
1. Locate the CPU sockets on the board.
Supports 4 x 10/100/1000 Base-T ports via RJ45 or
SFP interface
- 10GE Express Module:
Supports 2 x 10GE ports by SFP+ interface
• Controller:
- GE Express Module:
2 x Intel 82576 Dual Ports GE controllers
- 10GE Express Module:
1 x Intel 82599ES Dual Ports 10GE controller
• LAN Bypass:
- GE Express Module:
Supports 2 segment LAN bypass by RJ45 interface
version only
2. Taking one CPU at a time, remove the protective shield,
if present, and press the load lever and move it until it is
clear of the retention tab, and raise it.
• Dimensions (W x D): 72 x 172 mm
3. Make sure that the alignment triangle on the CPU lines
up with correct corner on the socket, and ease the CPU
into place.
Figure 1A: NAEM-0101 4 ports RJ45 Module
4. Close the load plate and push the load lever back down
until it engages the retention tab.
Figure 2A: NAEM-0102 4 ports SFP Module
Figure 3A: NAEM-1001 2 ports SFP Module
FWA-6500 Startup Manual
Installation
Installation
Installing the Heat sinks
1. Taking one heat sink at one time, apply a small dab of
heat transfer compound to the top of the installed CPU, and
then align it and carefully lower the heat sink into place.
2. Insert and loosely engage each heat sink screw. Then
screw them in carefully to secure the heat sink.
4. Remove the dummy IO bracket and install the add-on
card.
Installing the Riser Cards
1. There are two screws on the base chassis.
5. Put the bracket back and screw it in firmly.
2. Please release the screw and remove the bracket.
3. Remove the bracket.
FWA-6500 Startup Manual Installation
Jumpers and Connectors
Installing the Memory
The FWA-6500 system provides 12 x DDR3 DIMMs which
can support up to DDR3 1333MHz 96GB.
1. To install the memory, please start to install the memory
from CPU0 with DIMMA1.
LR_COMS: CMOS clear function
Pins
Result
1-2
Keep CMOS data*
2-3
Clear CMOS data
*: Default
Keep CMOS data*
Clear CMOS data
SW-BMC: Update and Reset BMC firmware
Pins
Result
1-4
Update BMC
2-3
Reset BMC
*: Default
Jumpers and Connectors
The board has a number of jumpers that allow you to configure your system to suit your application. The table below
lists the function of each of the jumpers and connectors.
Default* Update BMC Reset BMC
Connector / Jumper List
JP-WDT: Watchdog Header
LR_CMOS
Clear COMS
Pins
Result
SW-BMC
Update and Reset BMC firmware
1-2
Ignore WDT for LAN bypass enable
CN1
System FAN
2-3
Normal WDT function*
CN2
System FAN
*: Default
CN3
System FAN
CN10
Compact Flash socket 50 PIN
CN12
Front Panel Header
CN13
GPIO Connector
CN15
PS2 Header
CN16
USB Pin Header
CN18
COM Header
HD_LED
Front Panel LED
CASE_OPEN
Case Open
SW-PCIE-IOH
PCIe Switch (From IOH)
CN-IPMB0
Power Supply ACPI function
FWA-6500 Startup Manual
Ignore WDT for LAN Bypass
Normal WDT function*
JP-WDT: System Reset Header
Pins
Result
1-2
Ignore WDT for LAN bypass enable
2-3
Normal WDT function*
*: Default
Jumpers and Connectors
Jumpers and Connectors
CN12 : Front Panel Header
CN13 : GPIO
Pins
Result
Pins
Result
1
VCC
1
VCC
2
GND
2
GND
3
JP_PWRBTN#
3
9554_GPIO_0
4
FP_SYS_RST#
4
9554_GPIO_1
5
SMB_PWRCLK
5
9554_GPIO_2
6
SMB_PWRDAT
6
9554_GPIO_3
7
VCC3
7
9554_GPIO_4
8
SATA_LED_C
8
9554_GPIO_5
9
9554_GPIO_6
10
9554_GPIO_7
11
GND
12
VCC3
HD_LED : Front Panel LED
Pins
Result
1
VCC
2
SATA_LED_C
CN-IPMB0 : Power Supply ACPI function
Pins
Result
CASE_OPEN : CASE OPEN
1
IPMB0_SMBCLK
Pins
Result
2
IPMB0_SMBDAT
1
BMC_CASEOP#
3
IPMB0_ALERT#
2
GND
4
GND
5
BMC_3VSB
FWA-6500 Startup Manual Jumpers and Connectors
Software Installation
Software tested list:
SW-PCIe-IOH : IOH PCIe Strapping
Pins
Result
1-12
PEWIDTH5
2-11
PEWIDTH4
3-10
PEWIDTH3
4-9
PEWIDTH2
5-8
PEWIDTH1
6-7
PEWIDTH0
1.
Linux Debian 2.6.18 kernel
2.
Linux Redhat 5.0
Recommend customer to use Linux kernel 2.6.18 to develop
their own S/W
Specifications
This device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received,
including interference that may cause undesired operation.
PCIe Switch from IOH (SW-PCIe-IOH)
PEWIDTH[5:0]
PCIe-A
PCIe-B
SW-1-12
SW-2-11
SW-3-10
SW-4-9
SW-5-8
ON*
ON*
ON*
ON*
ON*
ON*
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
ON
ON
OFF
x4
x4
x4
x4
ON
ON
ON
ON
OFF
ON
x4
x4
x4
x4
ON
ON
ON
ON
OFF
OFF
x4
x4
x4
x4
ON
ON
ON
OFF
ON
ON
x8
x4
x4
ON
ON
ON
OFF
ON
OFF
x8
x4
x4
ON
ON
ON
OFF
OFF
ON
x8
x4
x4
ON
ON
ON
OFF
OFF
OFF
ON
ON
OFF
ON
ON
ON
x4
x4
x8
ON
ON
OFF
ON
ON
OFF
x4
x4
x8
ON
ON
OFF
ON
OFF
ON
x4
x4
x8
ON
ON
OFF
ON
OFF
OFF
x4
x4
x8
ON
ON
OFF
OFF
ON
ON
x8
x8
ON
ON
OFF
OFF
ON
OFF
x8
x8
ON
ON
OFF
OFF
OFF
ON
x8
x8
FWA-6500 Startup Manual
PCIe-C
PCIe-D
SW-6-7
x4
x4
x4
x8
x4
x4
x8
x4
x4
x8
x4
x8
Wait on BIOS
x8
x4
x8
x4
x4
x4
x8
x4
x8
x4
x8
x4
x4
x4
x8
x4
x8
x4
x4
x8
x8
x8
x4
x8
x4
x4
x4
x4
x4
x4
x8
x8
x4
x4
x4
x4
x4
x4
x8
x4
x4
x4
x4
x4
x8
Board Placement
CN3
CN2
CN1
CN5
PWR 2X4
CN4
PWR 2X4
+
DIMMC1
DIMMF1
DIMMC2
CPU0
DIMMF2
CPU1
DIMMB1
DIMME1
DIMMB2
DIMME2
DIMMA1
DIMMD1
DIMMA2
DIMMD2
CLR-CMOS
CN12
HD_LED
SW-BMC
LPT1
SW-PCIE-IOH
FP_PWR
CN15
CN11
12 x 2 PWR
SATA4 SATA1
SATA3 SATA2
1
PCIE-A
PCIE-B
CN14
1
CN21
PCIE-C
PWR-SW RESET-SW
CN18
CN-IPMB0
36
1
PCIE-E
108
PCIE-G1
PCIE-G2
CASE_OPEN
PCIE-D
CN16
61
46
71
23
94
84
33
FWA-6500 Startup Manual Jumpers and Connectors
1.
Read these safety instructions carefully.
2.
Keep this user manual for later reference.
3.
Disconnect this equipment from AC outlet before cleaning. Do not use liquid or spray detergents for cleaning.
4.
For pluggable equipment, the power outlet shall be installed near the equipment and shall be easily accessible.
5.
Keep this equipment away from humidity.
6.
Put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause damage.
7.
Do not leave this equipment in an environment unconditioned where the storage temperature under 0C (32F) or above
40C (104F), it may damage the equipment.
8.
The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER
THE OPENINGS.
9.
Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.
10. Place the power cord such a way that people can not step on it. Do not place anything over the power cord. The voltage
and current rating of the cord should be greater than the voltage and current rating marked on the product.
11. All cautions and warnings on the equipment should be noted.
12. If the equipment is not used for long time, disconnect it from the power source to avoid being damaged by transient overvoltage.
13. Never pour any liquid into ventilation openings. This could cause fire or electrical shock.
14. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.
15. If any of the following situations arises, get the equipment checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well or you cannot get it to work according to user manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
16. CAUTION: The computer is provided with a battery-powered real-time clock circuit. There is a danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacture. Discard used
batteries according to the manufacturer’s instructions.
17. THE COMPUTER IS PROVIDED WITH CD DRIVES COMPLY WITH APPROPRIATE SAFETY STANDARDS INCLUDING
IEC 60825.
FWA-6500 Startup Manual
Jumpers and Connectors
18. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
19. CAUTION: Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges.
20. CAUTION: Always ground yourself to remove any static charge before touching the motherboard, backplane, or add-on
cards. Modern electronic devices are very sensitive to static electric charges. As a safety precaution, use a grounding
wrist strap at all times. Place all electronic components on a static-dissipative surface or in a static-shielded bag when they
are not in the chassis.
21. CAUTION: Any unverified component could cause unexpected damage. To ensure the correct installation, please always
use the components (ex. screws) provided with the accessory box.
22. Caution text concerning lithium batteries:
23. “Rack Mount Instructions - The following or similar rack-mount instructions are included with the installation instructions:
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature
of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the
equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe
operation of the equipment is not compromised.
C) Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved
due to uneven mechanical loading.
D) Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the
effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when addressing this concern.
E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be
given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).”
FWA-6500 Startup Manual 
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising