DSP322UA Specifications
DSP 322ua
QSControl.net Digital System
QSControl.net, QSC’s next generation network
audio system, achieves the seamless integration of
the company’s control, processing, and monitoring
technologies. QSControl.net brings together QSC’s digital,
power amplification and loudspeaker products into a
unified system that enables the user to administrate it
all via a fully integrated graphical user interface. The new
generation DSP devices are designed to operate under
the company’s QSControl.net platform.
Inputs
Analog DSP 322ua
The DSP 322ua meets the processing needs of today’s
demanding audio systems. Controlled over an Ethernet
network using QSC’s Venue Manager software, this
newest generation of DSP devices are fully configurable.
Storing up to 8 signal flow design configurations with
nearly unlimited snapshot parameter recall, the DSP
322ua can fit any application. And with all data stored in
the device memory, files can be uploaded from the unit
to multiple computers without complications.
• Configurable DSP functions and signal paths
Through QSControl.net, QSC’s BASIS and next-generation
RAVE and DSP products can be networked together and
controlled from a single software interface. In addition,
multiple networked computers can be set up to control
and monitor all of the units simultaneously.
• Matrix mixer – any size, up to 24 x 24
Fixed Latency DSP
Users of most other configurable DSP systems are
familiar with a variable latency inherent in the processing
configuration. Add more processing blocks and you
also add delay, whether you want it or not. QSC’s DSP
engine is unique in having a short and fixed processing
latency through the DSP subsystem. When the A/D and
D/A converters are included, the total analog-to-analog
latency of a single unit is a negligible 2.354 milliseconds.
QSC’s fixed latency DSP is configurable DSP that stays
fast and predictable from one configuration to the next.
For more information, visit www.qscontrol.net
QSC and the QSC logo are registered trademarks of QSC Audio Products Inc. in
the U.S. Patent and Trademark office and other countries. THX is a trademark of
THX Ltd. All other trademarks are the property of their respective owners.
8 universal mic/line
DSP 24 x 24
Outputs
Analog
8 line level
Features
• Universal inputs - mic/line with pre-amps and phantom power
• Fixed latency DSP engine
• Ethernet controllable
• Each unit can store eight design configurations that can be changed on the fly
• Snapshots can recall config or block and/or parameter settings
• THX™ approved for professional cinema applications
DSP functions include, but are not limited to:
• Automixers – gain sharing
• Routers – any size, up to 24 x 24
• Gain controls – any channel count, up to 24
• Graphic equalizers
• F ilters – high-pass, low-pass, all-pass, shelf, parametric, parametric shelf,
Butterworth high and low-pass, Linkwitz-Riley high and low-pass, BesselThomson high and low-pass
• C
rossovers – Linkwitz-Riley, Butterworth, Bessel-Thomson in-phase, BesselThomson symmetrical, 2-way, 3-way, and 4-way general purpose adjustable
• Compressors, peak limiters, AGC’s, gates, dynamics processor
• D
uckers – up to 8 channels, up to 60 seconds fade in and fade out times,
priority mix
• Pink noise, white noise, sine generators
• Delays
• Macros – user-definable custom blocks with password protection
DSP 322ua
Specifications
PERFORMANCE
Dynamic Range (AES-17, -60 dB method, all sensitivities)
In
Out
Thru
Unweighted > 110 dB > 112 dB 108 dB
A weighted > 113 dB > 115 dB 111 dB
Distortion (20 Hz – 20 kHz, all sensitivities)
Gain = 0 - 30 dB < 0.008% THD+N < 0.009% THD+N < 0.009% THD+N
Gain > 30 dB < 0.05% THD+N < 0.009% THD+N < 0.05% THD+N
Crosstalk (20 Hz – 20 kHz)
Inter-channel (maximum) > 75 dB
Inter-channel (typical) > 90 dB
Intra-channel (maximum) > 85 dB
Intra-channel (typical) > 100 dB
Frequency Response
20 Hz – 20 kHz (maximum) +/- 0.5 dB
20 Hz – 20 kHz (typical) +/- 0.2 dB
Audio Converters 24 bit, 48 kHz, in and out
Mute Infinite attenuation
Delay DSP 322ua in stand-alone mode
2.354 milliseconds (default group delay)
Analog input through full DSP chain to analog output INPUTS/OUTPUTS Program Inputs 8 inputs
Connector type 3-pin “phoenix style” (a.k.a. “euro style”) detachable terminal blocks
Type Electrically balanced
Grounding All shield terminals connected to chassis
Pinout 1:+ / 2:- / 3:CHASSIS GND
Input Impedance (nominal) Balanced: 6.8k ohms / Unbalanced: 13.6k ohms
Common-mode Rejection 20 Hz – 20 kHz (minimum): > 54 dB / 20 Hz – 20 kHz (typical): > 60 dB
E.I.N. (maximum)
150Ω, 30 dB: 124.5 dBu / 150Ω, 60 dB: 125.0 dBu
Input Sensitivities (variable) Vrms: 0.9mV to 15.46 V / dBu: -62.2 to +26 dBu / dBV: -64.4 to +23.7 dBV
Phantom Power (per IEC 1938 [1996])
+ 48 V (software selectable)
Program Outputs
8 outputs
Connector Type 3-pin “phoenix style” (a.k.a. “euro style”) detachable terminal blocks
Type Electrically balanced
Grounding All shield terminals connected to chassis
Pinout
1:+ / 2:- / 3:CHASSIS GND
Maximum Output Level 9 V (rms) / +21.2 dBu / +19 dBV
CONTROL INPUTS/OUTOUTS
Relay Outputs 2 discrete floating relay switch outputs
Connector Type 3-pin “phoenix style” (a.k.a. “euro style”) detachable terminal blocks
Configuration Electromechanical relay
Pinout 1:NC / 2:NO / 3:COM
Switching Capacity (nominal) 1A 30 VDC
Logic Outputs 4 discrete outputs
Connector Type 2-pin “phoenix style” (a.k.a. “euro style”) detachable terminal blocks
Configuration Single-ended, TTL compatible
Pinout 1:+(Signal) 2:-(CHASSIS GND)
Omni Inputs 6 discrete inputs for TTL logic, voltage control or passive resistance
Connector Type 2-pin “phoenix style” (a.k.a. “euro style”) detachable terminal blocks
Configuration Single-ended, ground referenced
Pinout 1:+(Signal) / 2:-(CHASSIS GND)
Normal Operating Range Reads signals between 0-5 V nominally
Potentiometer Operation Use 10k ohms for full range
Voltage Tolerance +/- 48 V
Current Output 0.5 mA with
RS-232 Port
Female DB9 connector (setup and diagnostics purposes only)
QSControl Port
Neutrik Ethercon RJ45 ruggedized data connector
Indicators
QSControl Status Yellow Link, Tx, Rx, front panel / Green Link, Tx, Rx, rear panel
Power Blue, front panel
Diagnostic Red, front panel
DataPort Status (port) Tri-state (red, green, yellow), front panel
LCD Data Display 2 line x 16 character, backlit, front panel
Signal Presence
Tri-State (red, green, yellow), front panel
Specifications subject to change without notice.
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
DSP 322ua - 09/18/07
qscaudio.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement