SENSORS | Energy Management System | Sensor | Relay Panels | SLC560110R | Remote Controls | Low Power Amplifier | Remote Amplifier | Desktop Amplifier | Audio Distribution Unit | Lighting Control Panelboards | User manual | Schneider Electric Neo Keypad, Saturn Keypad, DLT Keypad, Decorator Keypad, Wiser Home Controller, Relays Panels, Dimmers Panels, System Units, Enclosures Panels, Area Lighting Panels, Mark II Touch Screen, Spectrum Touch Screen, Color Touch Screen, Unit Product details

C-Bus Controls, page 5-4

Dual Tech Ceiling Mount, page 5-21

Powerlink Lighting Control Panelboards, page 5-24

Table of Contents

Section 5

Lighting Control And Integrated Home Systems

Lighting Control Product Overview

One Line Overview

C-Bus™ Keypads, Touch Screens and Accessories

Neo Keypads

Saturn Keypads

DLT Keypads

Decorator Keypads

Touch Screens

Multi Room Audio

Hand Held Remote Controls

Thermostats

Sensors

Input Units

Relays

Dimmers

System Units

Enclosures

Area Lighting Panels

Software

Occupancy Sensors

Wall Switch Occupancy Sensors

Ceiling Mount Occupancy Sensors

Wall Mount Occupancy Sensors

Fixture Mounted Sensors and Controls

Powerlink Integrated Control Systems

Overview

Components

Device Power Supply

Device Router

Factory Assembled Panels

Powerlink Energy Management

Relay Panels

Cassia Energy Management System

5-2, 5-3

5-20

5-21

5-21

5-22

5-7

5-9

5-11

5-11

5-12

5-12

5-4

5-5

5-5

5-6

5-13

5-14

5-15

5-17

5-18

5-19

5-23

5-24

5-25

5-25

5-26

5-27

5-28

5-30

Relay Panel Family, page 5-28

© 2012 Schneider Electric

All Rights Reserved

This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com

5-1

Overview

Lighting Control

www.schneider-electric.us

Schneider Electric Occupancy Sensors, Powerlink and C-Bus™ control systems can be used independently or combined to provide the optimal lighting control solution for your home or business

5-2



All Rights Reserved


Overview



All Rights Reserved


5-3

C-Bus™


Class 1250 www.schneider-electric.us

Neo

™

Keypads

Neo Keypads offer localized finger-tip control of lighting and other electrical devices. With over 1,000 custom color combinations available, these elegant keypads compliment any decor. Requires plaster mud ring or single gang box with minimum internal width of 2.05”.

•

Button configurations include multi-point switching and dimming, master ON/OFF switching, and scene settings

•

Scene control includes up to forty group addresses per keypad. Larger scenes are possible by sharing memory among multiple keypads

•

Independent timers available for each button

•

Standard built-in infrared receiver permits keypad control at a distance with an optional infrared handheld remote

•

Dual-color LED windows on each button can glow in cool blue, orange, or combinations of both, indicating when a controlled device is ON or OFF

•

Auto “fallback” can dim button LEDs at a set time after the last key press

•

Locator LEDs can illuminate the top and bottom of the button area in cool blue, helping a user find the keypad in dim light or help the installer find the correct keypad when commissioning

•

Clean-lined low-profile keypads are wall mounted without external fittings

•

Optional button covers have ID windows, enabling quick identification of lighting scenes or controlled devices

•

Distinctively designed multi-layer cover plate consists of button covers, an outer surround, and an inner surround

•

Color schemes are easily customized and modified to suit personal taste or the décor

Standard Neo Keypads

Includes keypad, button covers, inner and outer surrounds.

White: SLC505( )NLWE

Cream: SLC505( )NLCM

Brushed Aluminum w/Slate: SLC505( )NLGB

( ) designates space for button configuration

Table 5.1: Standard Neo Keypad Assemblies

Catalog No.

SLC5052NLGB

SLC5052NLWE

SLC5052NLCM

SLC5054NLGB

SLC5054NLWE

SLC5054NLCM

SLC5058NLGB

SLC5058NLWE

SLC5058NLCM

Catalog Description

Neo, 2 button key input brushed aluminum

Neo, 2 button key input solid white

Neo, 2 button key input solid cream







$ Price

460.00

460.00

460.00

500.00

500.00

500.00

560.00

560.00

560.00

5-4

2 Button Keypad

Brushed Aluminum w/Slate: SLC505(2)NLGB

4 Button Keypad

Cream: SLC505(4)NLCM

8 Button Keypad

White: SLC505(8)NLWE

Custom Neo Keypad Assemblies

To order custom Neo Keypad assemblies indicate the number of buttons desired on the keypad and the color of each customizable component (inner surround, outer surround, and botton cover).

For example, in the diagram below, SLC505(8)NL(2)(8)(2) represents a Neo Keypad with eight buttons, a white (#2) outer surround, a brushed aluminum (#8) inner surround, and white (#2) button covers.

Table 5.2: Color Chart

Name Color Number

Slate

White

Cream

Soft Gray

Desert Sand

Black

1

2

3

4

5

6

Brown

Brushed Aluminuma

7

8

Golda 9 a Only the inner surround is available in Brushed Aluminum and Gold.

Table 5.3: Neo Keypad Accessories

Catalog No.

SLC5050IS( )

SLC5050OS( )


Neo, inner surround, (5pk)

Neo, outer surround, (5pk)

$ Price

152.00

46.00

SLC5052NRP( )

SLC5054NRP( )

SLC5058NRP( )

SLC5052NRI( )

Neo, button covers, 5052L, (5pk)



Neo, button covers, with ID window, (10pk)

60.00

60.00

60.00

82.00

Note: Accessories have unique catalog numbers. To specify colors for them,

(see Table 5.1) add the color number to the end of the catalog number

(Table 5.3). For example, SLC5052NR2 is the catalog number for a white button cover.

Neo button cover with

ID window

DE-8

Discount

Shedule



All Rights Reserved


Saturn 2 Button Keypad

C-Bus™

Keypads, Touchscreens and Accessories

Class 1250

Saturn

™

Keypads

Saturn Keypads incorporate a unique glass cover plate that creates a distinctive appearance. By virtue of the variety of button configurations available, one compact Saturn keypad can take the place of many single operation switches, ON/OFF toggles, dimmers, and timers. Available in two-, four-, or six-button keypads,

Saturn’s modern style is complemented by orange and blue LEDs that can instantly show the status of controlled devices. Requires plaster mud ring or single gang box with minimum internal width of 2.05”.

•


•

Scene control includes up to forty group addresses per keypad. Larger scenes are possible by sharing memory among multiple keypads

•


•

Dual-color LED windows on each button can glow in cool blue, orange, or combinations of both, indicating when a controlled device is ON or OFF

•

Auto “fallback” can dim button LEDs at a set time after the last button press

•

Locator LED can illuminate the keypad, helping a user find it in dim light

•

Clean-lined keypads are wall mounted without external fittings

•

Low-profile design extends only 0.5 in. out from the wall

•

Optional button covers with labels, enabling quick identification of lighting scenes or controlled devices


Saturn Keypads

Table 5.4: Complete Saturn Keypads

Catalog No.

SLC5082NL( )


Saturn Full Plate, 2 button

$ Price

634.00

SLC5084NL( ) Saturn Full Plate, 4 button 668.00

SLC5086NL( ) Saturn Full Plate, 6 button 700.00

Note: Color codes are: White (WE), Black (BK), Mocha (BR), Cream (CM). The catalog number for a two-button keypad in mocha would be SLC5082NLBR


Table 5.5: Saturn Keypad Accessories

Catalog No.


SLC5080LC8 Saturn Button Labels

SLC5082NLFSS Saturn Cover Plate Stainless Steel, 2 button



SLC5082FGF

SLC5084FGF

SLC5086FGF

SLC5082F30

SLC5084F30

SLC5086F30

Saturn Cover Plate White, 2 button



Saturn Cover Plate Cream, 2 button



SLC5082F60

SLC5084F60

SLC5086F60

SLC5082F70

Saturn Cover Plate Black, 2 button



Saturn Cover Plate Brown, 2 button

SLC5084F70 Saturn Cover Plate Brown, 4 button

SLC5086F70 Saturn Cover Plate Brown, 6 button

Note: Color options for faceplates: Pure White (PW).

$ Price

74.00

96.00

112.00

128.00

96.00

112.00

128.00

96.00

112.00

128.00

96.00

112.00

128.00

96.00

112.00

128.00

Saturn Style Keypad

DLT Keypads

Saturn™ Dynamic Labeling Technology™ (DLT) Keypads combine a programmable keypad button, and easily customized labels on a backlit LCD screen that eliminates the need for custom labels. By virtue of the variety of button configurations available, one compact DLT keypad can take the place of many single-operation switches,

ON/OFF toggles, dimmers, and timers. The five keypad buttons incorporate blue LEDs which complements the keypad’s sleek lines while showing the status of controlled devices.

•


•

Keypads have five physical buttons—four control buttons, and one scroll/page button—combined with two screens of labels, for a total of eight control buttons and two scroll/page buttons

•

Scene control includes up to forty addresses per keypad. Larger scenes are possible by sharing memory among multiple keypads.

•


•

Button LEDs can be used as locator lights in the dark

•

64 x 128 pixel LCD screen with a white backlight

•

Editable LCD labels, available for each button or control group, can display text, symbols, and graphics.

•

Dynamic graphic displays, such as bar graphs, can be enabled or disabled

•

Bitmaps can be downloaded for each group address or scene

•

Low-profile design, wall mounted without external fittings

Neo Style Keypad


All Rights Reserved

DE-8

Discount

Schedule


5-5

C-Bus™

5-6

Neo Decorator Keypad

Saturn Decorator Keypad



Table 5.6: Saturn and Neo Style DLT Keypads

Catalog No.


SLC5085DLWE Saturn DLT White

SLC5085DLBK Saturn DLT Black

SLC5085DLCM Saturn DLT Cream

SLC5085DLBR Saturn DLT Mocha

SLC5055DLGB Neo DLT Brushed Aluminum

SLC5055DLWE Neo DLT White

SLC5055DLBK Neo DLT Black

SLC5055DLSG Neo DLT Soft Grey

SLC5055DLCM Neo DLT Cream

SLC5055DLDS Neo DLT Desert Sand

Table 5.7: DLT Keypad Accessories

$ Price

966.00

966.00

966.00

966.00

898.00

898.00

898.00

898.00

898.00

898.00

Catalog No.


SLC5085DLFSS Saturn DLT cover plate, Stainless Steel

SLC5085DLFCM Saturn DLT cover plate, Cream

SLC5085DLFBK Saturn DLT cover plate, Black

SLC5085DLFBR Saturn DLT cover plate, Mocha

SLC5085DLFWE Saturn DLT cover plate, White

SLC5055DLFGB Neo DLT cover plate, Brushed Aluminum and Slate

SLC5055DLFBR Neo DLT cover plate, Brown

SLC5055DLFCM Neo DLT cover plate, Cream

SLC5055DLFBK Neo DLT cover plate, Black

SLC5055DLFSG Neo DLT cover plate, Soft Gray

SLC5055DLFDS Neo DLT cover plate, Desert Sand

SLC5055DLFWE Neo DLT cover plate, White

Note: Color options for faceplates: Pure White (PW).

$ Price

110.00

110.00

110.00

110.00

110.00

12.00

12.00

12.00

12.00

12.00

12.00

12.00

Neo™ Decorator Keypads

Neo Style Decorator Keypads provide the same features of a standard C-Bus keypad in a format designed to conserve horizontal wall space.

•

Button configurations include multi-point switching, dimming, and scene control

•

LED indicator reflects status of each button

•

Built-in infrared receiver to allow operation from C-Bus handheld remote control

•

Distinctive Neo styling designed to match standard Neo keypads and touchscreens

•

Custom color combinations available on request

•

Meets NEMA Standards WD-1, WD-6

Table 5.8: Neo Decorator Keypad Assembly (order face plates separately)

Catalog No.

Description $ Price

Neo Decorator 1 button keypad (XX) Designates Color. (order cover plate separately)

SLC5051NLM(XX) 1 button decorator keypad

Neo Decorator 2 button keypad (order cover plate separately)

SLC5052NLM(XX) 2 button decorator keypad brushed aluminum

386.00

408.00





430.00

452.00

Neo Decorator Blanking Plate (order cover plate separately)

SLC5850BP(XX) Neo blanking plate 14.00

Note: Designate colors (XX), when placing order for Neo style decorator keypads.

GB – Brushed, WE – White, CM – Cream, SG – Soft Grey, DS – Desert Sand, BK – Black, BR – Brown, LA – Light Almond, VY – Ivory.

Saturn™ Decorator Keypads

Saturn Style Decorator Keypads provide the same features of a standard C-Bus keypad in a format designed to conserve horizontal wall space.

•

Button configurations include multi-point switching, dimming, and scene control

•

LED indicator reflect status of each button

•

Built-in infrared receiver to allow operation from C-Bus remote controllers

•

Distinctive Saturn styling designed to match standard Saturn keypads and touchscreens

•


Table 5.9: Saturn Decorator Keypad Assembly (order face plates separately)

Catalog No.


Saturn Decorator 1 button keypad (XX) Designates Color. (order cover plate separately)

SLC5081NLM(XX) 1 button deco Saturn keypad, White 526.00






SLC5084NLM(XX) 4 button deco Saturn keypad, White

Blanking Plates

SLC5880BPPG(XX) Saturn Blanking Plate

Note: Designate colors (XX), when placing order for Saturn style decorator keypads.

WE – White, PW – Pure White, CM – Cream, BK – Black, BR – Brown.

556.00

24.00

DE-8

Discount

Schedule



All Rights Reserved


C-Bus™

Neo Decorator Style Cover Plate

2 Gang Saturn Decorator Style Cover Plate


Class 1250

Neo and Saturn Style Decorator Face Plates

C-Bus decorator style wall plates add a touch of flair to any décor. Available in either Neo or

Saturn styling.

•

Sleek, smooth contemporary architectural styling enhances fine decor

•

Screwless design for easy placement

•

Two piece kit allows easy retrofit

•


Table 5.10: Neo Decorator Style Cover Plates (order keypad assemblies separately)

Catalog No.


Neo Decorator Cover Plate 1 ganga

SLC5051GA(XX)


SLC5052GA(XX)


SLC5053GA(XX)

1 gang wallplate

2 gang wallplate

14.00

18.00

3 gang wallplate 22.00


SLC5054GA(XX) 4 gang wallplate 26.00

a Cover plate assembly includes inner and outer surrounds. Wall plate ordering (Order keypads separately). Order numbers for the Neo decorator style wall plates indicate the gang number desired on the wall plate and the color of the wall plate itself. Color codes are: Slate (1), White (2), Cream (3), Soft gray (4), Desert sand (5), Black (6),

Brown (7), Brushed aluminum (8), and Gold (9). For example, SLC505(1)GA(51) represents an order fo a Neo decorator style wall plate in one gang configuration, with a Desert sand outer surround and a slate inner surround.

Table 5.11: Saturn Decorator Style Cover Plates (order keypad assemblies separately)

Catalog No.

Description

Saturn Decorator Cover Plate 1 gangb

SLC5081GAPG(XX)


SLC5082GAPG(XX)

1 gang wallplate

2 gang wallplate


SLC5083GAPG(XX) 3 gang wallplate


SLC5084GAPG(XX) 4 gang wallplate b To specify color, add corresponding alpha codes. Black = BK, White = WE, Cream = CM, Mocha = BR.

Example SLC5081GAPG(WE) = Saturn Decorator 1 gang, White

$ Price

24.00

28.00

38.00

45.00

Touch screens

C-Bus Touch screens are unified wall-mounted panels for controlling lighting systems and accessories with the touch of a finger. They come in both monochromatic (Mark II) and color screen versions. Compact yet powerful, touch screens offer an attractive alternative to multiple single operation switches, ON/OFF toggles, dimmers, and timers which can clutter up even the nicest wall.

Mark II Black and White and Spectrum Color touch screen with Cream Saturn style cover plate

Mark II Black and White and Spectrum Color touch screen

•

Control screens support multi-point switching and dimming, master ON/OFF switching, scheduling, and scenes with multiple loads.

•

Preset scenes and functions automate the task of adjusting lighting levels to different lamps and fixtures.

•

RS-232 port for third party device integration through the built in Logic Engine

•

Standard real-time and astronomical clock permits time scheduling of lighting and other tasks

•

Variable dimming fade rates can be configured according to load or lighting zone

•

Locator option can be configured to help users find the screen in dim light

•

Clean-lined low-profile touch screen can be wall-mounted without external fittings

•

Infrared receiver for remote control

•

Stores up to 250 scenes with 100 group addresses each. Scenes can be triggered directly from the touch screen or any other device on C-Bus

Mark II Black and White and Spectrum Color touch screen (desktop model)

•

Screen swivels and pivots for optimal viewing

•

Control screens support multi-point switching and dimming, master ON/OFF switching, scheduling, and scenes wtih multiple loads.

•

Preset screens and functions automate the task of adjusting lighting levels to different lamps and fixtures.

•


•


•


•


Mark II Black and White and Spectrum Color touch screen desktop model


All Rights Reserved

DE-8

Discount

Schedule


5-7

C-Bus™

5-8

Color touchscreen in Neo style Brushed

Aluminum and Slate

Wiser Home Controller



Table 5.12:

Catalog No.

Catalog Description $ Price

Mark II B/W Touch Screen

SLC5050CTL2xx

SLC5080CTL2xx

SLC5000CTL2SS

Mark II w/Neo Style Cover Plate

Mark II w/Saturn Style Cover Plate

Mark II w/Stainless Steel Cover Plate

Mark II Touch Screen Desktop Model

SLC5000CTD2xx Mark II Desktop Touch Screen xx = color code / WE–White, BK–Black

2439.00

2499.00

2499.00

1920.00

Spectrum Touch Screen

SLC5000CTCL2

SLC5000CTCL2xx

SLC5050CTCL2xx

SLC5080CTCL2xx

SLCBS5000CTCL2

SLCBB5000CTCL2

Spectrum Base Unit Only

Spectrum w/non-stylized plastic Cover Plate

Spectrum w/Neo Style Cover Plate

Spectrum w/Saturn Style Cover Plate

Spectrum w/Stainless Steel Cover Plate

Spectrum w/Brass Cover Plate

2106.47

2374.45

2341.17

2386.69

2232.47

2265.22

xx = color code / GB – Brushed Aluminum and Slatea, WE – White, BK – Black, CM – Cream, BR – Mochab, PW – Pure Whiteb.

Spectrum Desktop Model

SLC5000CTCD2xx Spectrum Desktop Touch Screen xx = color code / WE–White, BK–Black

Accessories

2365.61

Mark II / Spectrum Accessories

SLC5000CT2WB

SLC5080CT2Fxx

SLC5000CT2FSS

SLC5050CT2Fxx

Wall box for Mark II / Spectrum Touch Screen

Replacement Cover Plate, Saturn style

Replacement Cover Plate, Stainless Steel

Replacement Cover Plate, Neo style

68.00

280.22

126.00

187.76

xx = color code / GB – Brushed Aluminum and Slatea, WE – White, BK – Black, CM – Cream, BR – Mochab, PW – Pure Whiteb.

a Neo only.

b Saturn only.

Color touch screen

•

Built-in RJ-45 Ethernet and C-Bus network, RS-232, and USB terminals

•

Touch sensitive 6.4 inch (640 x 480) color LCD panel

•

Control screens support multi-point switching

•


•


•


•

Clean-lined low-profile touch screen can be wall-mounted without external fittings

•


Table 5.13:

Catalog No.


Color Touch Screen

SLC5050CTCxx

SLC5080CTC2xx

Color touch screen w/Neo style Cover Plate

Color Touch Screen w/Saturn style Cover Plate

Color Touch Screen Accessories

SLC5000CTCRM

SLC5000CTCNA

SLC5000CTCWB

SLC5000CTCPS

SLC5080CTCFxx

SLC5050CTCFxx

Plasterboard Bracket for Color Touch Screen

Nail Bracket for Color Touch Screen

Wall box for Color Touch Screen

Power supply for Color Touch Screen

Replacement Cover Plate, Saturn style

Replacement Cover Plate, Neo style xx = color code / GB – Brushed Aluminum and Slatea, WE – White, BK – Black, CM – Cream, BR – Mochab.

a Neo only.

b Saturn only.

$ Price

8480.00

8480.00

90.00

60.00

68.00

263.00

356.00

29.00

Wiser™ Home Controller

The Wiser Home Controller is the missing piece of the smart home puzzle, enhancing the capabilities and connectivity of the C-Bus network. Its easy-to-use graphical user interface (GUI) provides access to the home C-Bus network and all of your electrical, multimedia, and telecommunication needs. This same GUI can be installed across multiple control devices, such as mobile phones, TVs with Microsoft

®

Windows

®

Media

®

Center, personal computers, and web tablets, in addition to the C-Bus range of touch screens and keypads. No matter where you are, the Wiser Home Controller allows you to monitor and control your home environment locally or remotely over the internet.

Features

•

Ethernet and Wi-Fi based controller for your C-Bus system

•

Built-in Ethernet router and Wi-Fi access point

•

Support for lighting, air-conditioning, multi-room audio, alarms, cameras, and other equipment

•

Built-in scene, scheduling, and logic programming modules

•

Allows remote reprogramming from outside the home/building by installers

•

Common, intuitive interface for all devices

•

Mobile phone and web-enabled device control

Table 5.14: Order Information

Description

Wiser Home Controller

Catalog Number

WHC-5918

$ Price

1505.00

DE-8

Discount

Schedule



All Rights Reserved


C-Bus™

Multi Room Audio

Class 1250

C-Bus Multi Room Audio

Extend the capabilities of a C-Bus system by incorporating award winning multi-room audio into your next project.

Multi-room audio augments a C-Bus lighting control system, providing high quality sound throughout a home or business.

C-Bus multi-room audio readily integrates with other C-Bus controls, providing a single source for audio and lighting from a single keypad or touch screen. Sound is distributed throughout the home through the Matrix Switcher and routed to local amplifiers.

A typical C-Bus Multi Room Audio system distributes up to four analog audio inputs, five if an Audio Distribution Unit is used, and one optical input. These inputs are distributed up to 8 zones, each consisting of one or more amplifier.

Additionally, each amplifier is capable of accepting a local analog audio input, providing up to six stereo audio channels for each amplifier.

Matrix Switcher

Low Power Amplifier

Matrix Switcher

The C-Bus™ Audio Matrix Switcher provides a revolutionary means for distributing audio throughout a home. This Matrix

Switcher provides up to eight zones of audio output from four source inputs. The C-Bus Matrix Switcher allows you to send streaming audio programs to the audio zones from a variety of sources, including a local area network (LAN), or a

USB memory stick (Model: SLC5608842E). In addition, it will also allow connection of a portable music player directly to the Matrix Switcher’s front audio panel. Audio sources can be selected from the front panel or by any C-Bus™ input device such as touch screens or keypads. The Matrix Switcher is ideally suited for multi-room audio and structured wiring systems. Keypads and other C-Bus™ devices connect to the Matrix Switcher via CAT-5 modular jacks. Outputs to remote and desktop amplifiers are made with low voltage wiring. In addition to the six source inputs, two mono broadcast annunciation inputs are provided for connection to intercoms or other systems. Broadcast annunciation input can be given priority over other source inputs and features fully adjustment volume and over-stepping mute features.

•

Suitable for 19” Rack Mount with rack mount ears provided.

•

Each Matrix Switcher can distribute digital audio to up to 8 MRA amplifiers. You can install up to 3 Matrix Switchers on a C-Bus network.

•

The Matrix Switcher can provide power for the attached amplifiers via the Digital Audio cables. You can connect an external power supply to an amplifier to increase its audio power output.

•

The choice of the audio program for an amplifier can be made at the Matrix Switcher or in the audio zone. You can use C-Bus input devices to choose the source and to adjust volume, tone and muting.

•

The Dual AM/FM tuners inside the Matrix Switcher can distribute preset station choices to any of the audio zones.

•

Distributes streaming audio from several sources using the C-Bus Ripple software application running on a networked PC.

•

You can connect up to 4 stereo analogue line-level inputs to the Matrix Switcher. If you need to add another source input, you can install an MRA Distribution Unit and power supply.

•

Compatible with C-Bus devices.


All Rights Reserved

DE-8

Discount

Schedule


5-9

C-Bus™

Desktop Amplifier

Audio Distribution Unit

Indoor Ceiling Mount

Speakers

Indoor Wall Mount

Speakers

Indoor/Outdoor Speakers

Multi Room Audio


Remote Amplifiers

C-Bus Multi Room Amplifiers provide efficient, high fidelity audio to individual rooms. Available in either desktop or remote mount versions, these amplifiers are specifically designed to operate on the C-Bus network as an extension of a lighting control system, without third party gateways or custom integration. This means the ability to control amplifiers with the same keypad or touch screen used to control lighting levels.

When combined with the C-Bus Matrix Switcher, these amplifiers deliver excellent stereo sound. Connections are provided for up to two sets of 8 ohm speakers. Both desktop and remote amplifiers provide a local input connection for attaching to CD or mp3 players, etc. In addition, the desktop amplifier will accept remote commands via its infrared receiver. Infrared remote included.

•

10 Watt digital efficient stereo amplifier, 25 Watts when connected to local power supply (optional)

•

Super quiet design

•

On board 8 ohm loudspeaker connections

•

Local source input — RCA jack

•

C-Bus connection (connects with CAT-5 cable)

•

Volume control (desktop model)

•

On-board IR receiver (desktop model)

•

Stereo headphone connection (desktop model)

•

Infrared remote included (desktop model only)

Audio Distribution Unit

The C-Bus Audio Distribution Unit is an optional device that can be used in conjunction with the C-Bus Multi Room

Audio System to further enhance C-Bus enabled audio product family.

The C-Bus Audio Distribution Unit distributes a single digitized stereo audio input source to multiple locations via amplifiers wired in a parallel format. Functions such as Volume, Bass, Treble and Balance can be adjusted from a

C-Bus input device at any of the audio output locations. The C-Bus Audio Distribution Unit converts a single analog stereo audio input to a digital audio output. That output can then be connected to the Matrix Switcher as an additional input or to the C-Bus Desktop or Remote Amplifier as a stand-alone configuration.

•

Distributes a single stereo audio source to C-Bus Audio Amplifiers via a digitized signal over Cat-5 cable

•

Does not require any C-Bus programming (hardware only)

•

One stereo analog audio source input (2 X RCA)

•

One digital audio output

•

Output can be looped between C-Bus Audio Amplifiers

•

IR emitter port

Table 5.15: C-Bus Multi Room Audio Components

Catalog No.

SLC560110R Low Power Amplifier, rack mountable

Catalog Description $ Price

TBD

SLC5608842

SLC5608842E

Matrix Switcher w/4 stereo analog inputs, 2 internal AM/FM tuners, IR input and target connections. Up to 8 MRA Zones.

Matrix Switcher w/4 stereo analog inputs, 2 internal AM/FM tuners, IR input and target connections. Audio streaming using a LAN or

USB source. Up to 8 MRA Zones.

4599.00

4274.10

SLC560125D

SLC560125R

Desktop Amplifier

Remote Amplifier

1908.15

1609.79

SLC560011 Audio Distribution Unit 790.41

SLC5600P24500S Amp External Power Supply (only needed if Audio distribution unit is used to provide an additional digital input for the Matrix Switcher) 53.22

Accessories

SLC5600P241250 Low Power Amplifier Power Supply

SLC560110E Low Power Amplifier Enclosure (used for linking up to 4 amplifiers/enclosures together for mounting in a 19” rack)

SLC560110MB Low Power Amplifier Wall Mounting Bracket

SLC5600P243750T Audio Amplifier Power Supply

SLC560125MB Remote Amplifier Mounting Bracket

TBD

TBD

TBD

445.93

42.24

Audio Speakers

C-Bus Audio Speakers are available as indoor or outdoor models and are designed to be used with home theater, multi-room, and outdoor audio applications.

The indoor speakers come in wall or ceiling mount versions that are installed with the front of the speaker flush with the mounting surface.

The indoor/outdoor speakers are available in black or white and can be placed on a shelf or hung on a surface by using the included bracket.

•

Flush-mount, shelf-mount, and surface-mount models

•

Indoor and outdoor models

•

High-impact plastic components and powder coated metal grills produce a long-lasting unit suitable for indoor and outdoor use

•

8 ohm impedance

•

Available with Kevlar™ (indoor units only) or polypropylene drivers (indoor and outdoor units) for high-quality sound in all applications

•

All models are off the floor, saving floor space

•

Indoor/Outdoor Speakers have a pre-installed, removable mounting bracket

•

Indoor/Outdoor Speakers can be placed on a shelf or hung from a surface by their bracket (included)

•

Tracing/painting template included

Table 5.16: Multi-Room Audio Speakers

Catalog No.


SLC5600IWP

SLC5600IWK

SLC5600ICP

SLC5600ICK

In-Wall Polypropylene speakers

In-Wall Kevlar speakers

In-Ceiling Polypropylene speakers

In-Ceiling Kevlar speakers

SLC5600ODPBK Outdoor Black speakers

SLC5600ODPWE Outdoor White speakers

$ Price

429.58

560.00

408.53

521.09

468.30

468.30

5-10

DE-8

Discount

Schedule



All Rights Reserved


C-Bus™

8 button remote control

Universal remote control

4 Zone Thermostat

Single Zone Thermostat

Multi Room Audio and Thermostats

Class 1250

Hand Held Remote Controls

C-Bus remote controls are designed for use with C-Bus keypads, multi-sensors, and touch screens. available in both four and eight button versions, these remotes have a range up to

50 feet (line of sight).

The universal remote control unit allows a single remote control unit to replace various other remotes including VCRs, CD players, DVRs, and TVs. Up to sixteen remote control codes are supported.

Table 5.17: Handheld Remote Controls

Catalog No.

SLC5084TX

SLC5088TX

SLC5030URC


Handheld infrared remote 4 button

Handheld infrared remote 8 button

Handheld universal remote control

$ Price

200.00

400.00

440.00

Single and 4 Zone Network Thermostats

C-Bus Thermostats are used to regulate the air temperature of zones by controlling heating-ventilation-air conditioning (HVAC) equipment. The air temperature is monitored by the unit’s temperature sensor or optionally via an external C-Bus temperature sensor.

C-Bus single and programmable 4 Zone Thermostats may operate as stand alone devices, or be controlled via other C-Bus devices such as wall switches or touch screens.

Programmable 4 Zone Thermostats can schedule up to four set points during a day, and unique schedules can be programmed for each day of the week.

Both models include setback mode, (saves power by using a wider acceptable temperature range within which heating or cooling is not performed) and temperature guard, (ensures the temperature is maintained within a specified temperature range).

•

Easy to read, large LCD display

•

Control by keypads and other devices on the C-Bus network

•

Available in black, white and stainless steel fascias

•

Setback mode

•

Temperature guard mode

•

Internal Timer

•

Daily schedule set points (4 Zone model)

•

Display temperature in Celsius or Fahrenheit

•

RWG interface (relay models only)

•

Easily configured by using the Clipsal Toolkit software program

Table 5.18: Single and 4 Zone Network Thermostats

Catalog No.

SLC5070THBWE

SLC5070THPWE

SLC5070THBBK

SLC5070THPBK

SLC5070THBSS

SLC5070THPSS

SLC5070THBRWE

SLC5070THPRWE

SLC5070THBRBK

SLC5070THPRBK

SLC5070THBRSS

SLC5070THPRSS

SLC5031RDTSL


Single Zone, White, no relay

4 Zone, White, no relay

Single Zone, Black, no relay

4 Zone, Black, no relay

Single Zone, Stainless, no relay

4 Zone, Stainless, no relay

Single Zone w/relay, White

4 Zone w/relay, White

Single Zone w/relay, Black

4 Zone w/relay, Black

Single Zone w/relay, Stainless

4 Zone w/relay, Stainless

Remote Temperature Sensor

$ Price

649.00

799.00

649.00

799.00

649.00

799.00

724.00

899.00

724.00

899.00

724.00

899.00

298.00


All Rights Reserved

DE-8

Discount

Schedule


5-11

C-Bus™

Light Level Sensor

Sensors


Light Level Sensor

The C-Bus Light-Level Sensor measures ambient light levels and automatically issues ON,

OFF, or ramp commands over a C-Bus network. The light-level sensor can control relays, dimmers, or remotely operated circuit breakers, changing their status according to pre-set ambient lighting targets. The C-Bus light-level sensor has a dynamic range between 5-150 foot candles, and compensates for noise and rapid light intensity fluctuations.

360 o

Indoor PIR Sensor

Outdoor Light Level Sensor

C-Bus Outdoor Light-Level Sensor measures ambient light levels and automatically issues

ON/OFF or ramp commands over a C-Bus network to maintain outdoor lighting levels.

Primarily designed for outdoor use, this light-level sensor is also suitable for indoor setting in which a water resistant casing is desirable.

The light-level sensor can control up to two C-Bus group addresses: one address controls

ON/OFF switching of a lamp circuit according to a pre-determined ambient light level, while the other is used to continuously regulate the light-level output of any number of lampsl

The target light level, the margin, and other sensor options are easily configured by using the C-Bus Toolkit software.

•

Outdoor use, wall- and ceiling-mounted low-profile unit

•

Can maintain a constant illumination level of 5-150 footcandles

•

Adjustable lumin setpoint

•

Control of up two C-Bus group addresses

•

Sensors receive data and power over a single C-Bus twisted-pair cable, so they do not require power packs or line-voltage connections

•

180° field of view

Table 5.19: C-Bus Light Level Sensor

Catalog No.

SLC5031PE

SLC5031PEWP


Light level sensor, 0–150 Foot-candles, Indoor

Light Level Sensor, 5–150 Foot-candles, Outdoor

$ Price

208.00

278.00

Outdoor PIR Sensor 90 o

Indoor PIR Sensor

360 o

PIR Multi Sensor


C-Bus occupancy sensors are available for both indoor and outdoor applications. All C-Bus sensors incorporate reliable passive infrared detection (PIR) circuits for occupancy detection along with integral light level sensors to prevent switching of lights if sufficient ambient light is present. Sensors feature programmable adjustments for sensitivity and time delay, walk test LED for commissioning and optical bandpass filtering with dual element detectors to minimize false triggering.

•

90° Indoor sensors are intended for wall or ceiling mounting. These sensors have a continuous detection field of 400 square feet and a 90° field of view.

•

360° Indoor sensors are intended for flush mounting in drop ceilings. They have a minor motion detection field of 800 square feet making them ideal for use in offices, copier rooms, closets, and restrooms where it can be mounted in the center of the detection area.

•

360° Multi-Sensors combine a passive infrared receiver (PIR) for occupancy sensing, a light-level sensor, and an infrared remote receiver into a small, highly versatile unit. The multi-sensor’s 2.8 inch face diameter makes it unobtrusive and ideally suited for flush mounting on the ceiling with effective

IR coverage up to 800 square feet. The built-in IR receiver accepts commands from an optional handheld remote controller, making the sensor ideal for classrooms and conference room areas.

•

Outdoor PIR Motion Sensor combines reliable thermal-radiation-based control of lighting with rugged construction suitable for outdoor requirements. The unit’s advanced circuits and flat multisegmented lens provide coverage of up to 3000 square feet in a 110° field of view.

Table 5.20: C-Bus Occupancy Sensors

Catalog No.

SLC5750WPL

SLC5751L

SLC5753L

SLC5753PEIRL


Occupancy sensor, multi, outdoor, 110 deg

Occupancy sensor, PIR, indoor, 90 deg

Occupancy sensor, PIR, indoor, 360 deg

Occupancy sensor, multi, indoor, 360 deg

$ Price

283.00

227.00

213.00

268.00

Auxiliary Input Unit

C-Bus Four-Channel Auxiliary Input Units increase the versatility of the C-Bus network by facilitating remote access with any dry-contact switch mechanism. DIN-rail mounted for quick installation, the auxiliary unit can be configured with standard C-Bus control functions such as remote scene triggering, ON/OFF, toggle, dimmer, or timer.

•

Provides four isolated inputs for external voltage-free mechanical switches

•

Control options include remote scene triggering, ON/OFF, toggle, dimmer, or timer operations

•

LEDs indicate operational status of each channel

•

Standard built-in C-Bus network connectors: (2) RJ-45

•

Non-volatile memory stores operating status for recovery from a power outage

•

DIN style construction 4M wide: 3.4”(L) x 2.8”(W) x 2.6”(H)

•

Compatible with all Clipsal devices and the Square D Powerlink™ NF3000G3C controller

5-12

Four-Channel Auxiliary Input unit

DE-8

Discount

Schedule



All Rights Reserved


C-Bus™

General Input unit

CLIPSAL

5104BCL

Bus Coupler

1 2 3 4

Four-Channel Bus Coupler

Changeover Relay

Input Units and Relays

Class 1250

General Input Unit

Four-Channel General Input Units measure TTL digital and real-world analog quantities and generate messages about the measurements to the C-Bus network. By acting as an interface with various external sensors, the general input unit enables integration of the

C-Bus network with a variety of system types, such as those for HVAC and for power monitoring. Configuration options include selectable input types, eight adjustable decision thresholds per channel, definable actions, selectable filtering, broadcast rates, and a separate hysteresis value per channel.

•

Measures TTL digital quantities including voltage, current, or resistance from external sensors such as light level, pressure, and temperature

•

Four channels of input, each with an adjustable hysteresis value, eight decision thresholds, and a software-selectable input value transformation in the form y =ax +b

•

Input channels are compatible with a range of third-party sensors

•

Control functions include load switching, dimming, trigger applications, enable control applications, and measurement applications

•

Includes 120 V/24 Vdc power pack

•

Dimensions: 5.67 in. (144mm) wide x 2.60 in. (66mm) deep x 3.35 in. (85mm) tall

•

Compatible with all Clipsal devices and the Square D Powerlink NF3000G3C controller

Bus Couplers

Bus Couplers provide an interface between dry-contact mechanical switches and the C-Bus network. Available in two-and four-channel models, the bus coupler is small enough to be used in restricted spaces such as wall boxes with existing switches. Configuration options include standard control functions such as ON/OFF, toggle, dimmers, and timers.

•

Provides two or four non-isolated inputs for external voltage-free mechanical switches. Two-channel units feature independent remote LED outputs

•

Two-way removable terminal block for the C-Bus connection

•

Receives data and power over a network, so it does not require power packs or line voltage connections

•

Scene capabilities

•

2.2”(L) x 1.9”(W) x 0.7”(H)

•

Compatible with all Clipsal devices and the Square D Powerlink NF3000G3C controller

Table 5.21: Input Units

Catalog No.

SLCLE5504AUX

SLCE5504TGI

SLC5102BCLEDL

SLC5104BCL


4 Channel auxiliary input unit

4 Channel general input unit

2 Channel bus coupler

4 Channel bus coupler

$ Price

544.00

1194.00

212.00

243.00

Relays

C-Bus Relay Units are intended for switching resistive, inductive, fluorescent and incandescent low-voltage loads. Relay units are designed to be mounted in suitable DIN style enclosures. Relay units feature:

•

Local toggle buttons to allow individual channels to be toggled

•

Remote ON and OFF facilities permitting all channels to be turned ON or OFF without C-Bus

Network communications

•

Two (2) Convenient built-in C-Bus network connectors (RJ-45)

•

LED Indicators to show the status of the network and the unit

•

Units available both with and without a 200ma power supply on-board.

•

Compatible with all Clipsal devices and the Square D Powerlink™ NF3000G3C controller

Changeover Relay

C-Bus 2A Changeover Relays are designed to operate three-speed motors and two-way motor control devices. Some of their most common applications include operating motorized blinds, shutters, curtains and skylights (open/closed) where they provide a much simpler alternative to traditional and obtrusive relay interlocking systems.

•

Four (4) isolated independently operating relay channels

•

120 Vac and 277 Vac units

•

2A motor rating

•


Table 5.22: Changeover Relays

Catalog No.

SLC5504TRVFC

SLC5504TRVFCP

SLC5504HRVFC

SLC5504HRVFCP


4 Channel Changeover Relay, 125 V, with power supply

4 Channel Changeover Relay, 125 V, without power supply

4 Channel Changeover Relay, 277 V, with power supply

4 Channel Changeover Relay, 277 V, without power supply

$ Price

1100.00

1010.00

1100.00

1010.00


All Rights Reserved

DE-8

Discount

Schedule


5-13

C-Bus™

4-Channel 10 A Relay

4-Channel 20 A Relay

8-Channel Low Voltage Relay

Phase Angle Dimmer with Power Supply

Relay Units and Dimmers


10 Amp Relay

C-Bus 10A Relays feature a zero crossing magnetically latching relay designed for switching the harsh electrical loads associated with today’s high efficiency lighting systems.

•

Four (4) or twelve (12) independently operating voltage free relay contacts

•


•

10 A rating

•

Dimensions: 5.67 in. (144 mm) wide x 2.60 in. (66 mm) deep x 3.35 in. (85 mm) tall

Table 5.23: 10 Amp Relay

Catalog No.

SLC5512TRVF

SLC5512TRVFP

SLC5504TRVF

SLC5504TRVFP

SLC5512HRVF

SLC5512HRVFP

SLC5504HRVF

SLC5504HRVFP


12 Channel Relay, 120 V, 10 A with power supply

12 Channel Relay, 120 V, 10 A without power supply

4 Channel Relay, 120 V,10 A with power supply




4 Channel Relay, 277 V,10 A with power supply


$ Price

2168.00

1973.00

1043.00

843.00

2168.00

1973.00

1043.00

843.00

20 Amp Relay

C-Bus 20 A Relays feature a zero crossing magnetically latching relay designed for switching the harsh electrical loads associated with today’s high efficiency lighting systems.

•

Four (4) independently operating voltage free relay contacts

•


•

20 A rating

•


Table 5.24: 20 Amp Relay

Catalog No.

SLC5504TRVF20

SLC5504TRVF20P

SLC5504HRVF20

SLC5504HRVF20P






$ Price

1320.00

1142.00

1320.00

1142.00

8-Channel Low Voltage Relay

The C-Bus 8-Channel Low Voltage Relay is a C-Bus output device that controls up to eight low voltage relay channels. The unit is powered from C-Bus and requires no other power source. The 8-Channel Low Voltage Relay can be used in many low voltage applications including controlling irrigation solenoids and low voltage damper solenoids for HVAC control. The unit can also be used in integrating 3rd party equipment through pulse signal controls.

•

8 channels of 2 A switched loads @ 30 Vac/dc

•

8 channels are all isolated change over relays

•

Control of 3rd party products

Table 5.25: 8-Channel Low Voltage Relay

Catalog No.

SLC5108RELVP


8-Channel Low Voltage Relay

$ Price

298.00

Phase Angle Dimmers

C-Bus Phase Angle Dimmers are intended for controlling incandescent and compatible lowvoltage and florescent lighting. Each of the unit’s channels can independently control loads to create dynamic lighting scenes. These dimmer units automatically compensate for voltage and frequency fluctuations and employ advanced phase-control techniques to reduce flicker and increase lamp life.

•

Four (4) independent channels supporting up to 4 A continuous load per channel, eight (8) independent channels supporting up to 2 A continuous load per channel

•

Units available both with and without a 200 mA power supply on-board.

•

120 Vac

•


5-14

DE-8

Discount

Schedule



All Rights Reserved


4 Channel

0–10 V Dimmer Unit

DALI Gateway

C-Bus™

Professional Dimmer

Dimmer Units and System Units

Class 1250

Professional Dimmer

C-Bus Professional Dimmers can control incandescent and compatible low-voltage and florescent lighting. These dimmers are ideal for larger heavily loaded circuits. Each channel provides independent dimming and incorporates thermal overload and over-current protection. These dimmer units automatically compensate for voltage and frequency fluctuations and employ advanced phase-control techniques to reduce flicker and increase lamp life.

An optional terminal box is available for conduit connections. Configuration options include network monitoring of the channel load and network voltages, adjustable delays for dimming levels, and master override.

•

Specialized dimming modes—soft turn on/off and linear brightness control

•

Built-in power supply sources 60 mA to the C-Bus network

•

Individual channels can be turned On/Off at the unit or via C-Bus commands

•

LEDs indicate the status of the network at the unit and the status of the unit’s load and power

•

Optional terminal box for connecting conduit

•

120 Vac

•


Table 5.26: C-Bus Dimmers

Catalog No.

SLC5504TD4A

SLC5504TD4AP

SLC5508TD2A

SLC5508TD2AP

SLC5104TD5

SLC5102TD10

SLC5101TD20

SLCU5100TB


4 x 4 A dimmer, incan/mag,125 V, 4 A, with power supply

4 x 4 A dimmer, incan/mag,125 V, 4 A, without power supply

8 x 2 A dimmer, incan/mag,125 V, 2 A, with power supply

8 x 2 A dimmer, incan/mag,125 V, 2 A, without power supply

4 x 5 A dimmer, incan/mag,125 V, with power supply



Termination box for SLCLU510X Series dimmer units

$ Price

1024.00

800.00

1024.00

800.00

1926.00

1926.00

1926.00

78.00

0–10 V Dimming Unit

The C-Bus Analog Output Unit provides four channels of analog 0–10 Vdc for controlling electronically dimmable fluorescent lighting ballasts.

•

Produces four independently controllable channels of 0–10 Vdc for controlling dimmable flourescent lighting ballasts, or other 0–10 V controllable loads

•

Individual channels can be turned ON/OFF at unit, via C-Bus commands, and through a remote override option

•

120 V or 277 Vac models available

•


Table 5.27:

Catalog No.

SLCLE5504TAMP

SLCLE5504HAMP


4 Channel 0–10 V Output, 120 V

4 Channel 0–10 V Output, 277 V

$ Price

624.00

624.00

DALI Gateway

The C-Bus Digital Addressable Lighting Interface (DALI) Gateway provides an isolated two-way communications path between a C-Bus network and two DALI networks, making it possible to use C-Bus devices to control DALI ballasts.

•

Provides two-way communications between C-Bus and DALI networks, routing selected messages from one to the other

•

Unit is transparent and invisible to DALI ballasts

•

Receives data and power over the network, so the unit does not require power packs or line-voltage connections

•


Table 5.28:

Catalog No.

SLC5502DAL


2 Channel DALI Gateway

$ Price

1014.00

DMX Gateway

The C-Bus DMX Gateway is a DIN rail mounted unit that maps C-Bus Group Addresses and levels to a DMX-

512 A interface.

The C-Bus DMX Gateway is a one way device. It permits C-Bus input devices such as keypads, DLTs and

PIRs to control lighting devices with DMX interface capabilities. These include many manufacturers of LED fixtures and theatrical lighting equipment.

•

Includes DMX interface (bootlace connnectors to 5-pin female XLR)

•

DMX Master device

•

Receives data and power over the C-Bus network, so the unit does not require a line voltage connection

•

DIN style construction 4M wide: 3.4” (L) x 2.8” (W) x 2.6” (H)

Table 5.29:

Catalog No.

SLC5500DMX


C-Bus to DMX Gateway

$ Price

936.00

Network Bridge

The C-Bus Network Bridge provides a communication channel between C-Bus units on separate networks, expanding the total number of units that can be configured, controlled, and monitored.

•

Increases transmission distances by acting as a repeater station for data transmission

•

Expands the total number of C-Bus devices that can operate on the system by isolating devices to individual networks

•

Indicates each network’s status level

•

Uses built-in connectors to connect to a C-Bus network

•

Compatible with Powerlink G3 3000C controller and all C-Bus components, including keypads, sensors, and dimmers

•


Network Bridge


All Rights Reserved

5-15


C-Bus™

Power Supply

PC Interface

System Units


Power Supply

The C-Bus Power Supply is specifically designed to operate with the C-Bus network as a power source for passive

C-Bus devices. Up to five power supplies can be connected to a single C-Bus network.

•

Available in 120 and 277 Vac models

•

Regulating power supply compensates for line voltage and frequency variations, so there is constant output

•

Sources up to 350 mA to the C-Bus network

•

UL listed to operate in parallel with other Clipsal power supplies, up to five on a single C-Bus network

•

Incorporates short circuit and reverse polarity protection

•


PC Interface

The C-Bus PC Interface (PCI) expands options for configuring, controlling, and monitoring C-Bus networks by providing an interface between the network and a personal computer (PC). The C-Bus PCI module easily mounts to a DIN rail and connects to the C-Bus network. Power to the unit is provided through the C-Bus network.

Serial

•

Unit/Comms LED shows the status of the unit’s power and of any data transmissions

•

Three RS-232 serial connectors for connecting to a PC or to external devices: (1) 9-pin D-type serial connector (female) and

(2) 8-pin RJ-45 connectors

•

Two C-Bus network connector ports: RJ-45 sockets

•

Data cable for connecting PCI and personal computer, including DB9 connectors

USB

•

Unit/Comms LED shows the status of the unit’s power and of any data transmissions

•

Two C-Bus network connector ports: RJ-45 sockets

•

USB PC connection

•

Data cable for connecting PCI and personal computer

Pascal Automation Controller

C-Bus Pascal Automation Controller (PAC) provides extended conditional and real-time event programming to C-Bus systems. The PAC supports a full range of programming commands including conditional logic, flow control variables and scheduling.

Systems integrators will appreciate the built-in scheduling tools, scene tools, and wizards for creating basic logic programs. Full programming capabilities can be achieved utilizing the free-form script editor based off the pascal programming language.

•

Connects directly to C-Bus network

•

Powered from the C-Bus network

•

USB port for connection to personal computer

•

(2) RS232 ports for third party device control

•

Real time, astronomical and C-Bus system clock included with 24 hour internal capacitor backup and external 12 Vdc battery terminals

Programming capabilities including: i.e. Conditional logic (if, then, and, or, not, etc.), Flow Control (for, repeat, while),

Variables (integer, real, Boolean, character, string), Control and monitoring of group addresses, Control and monitoring of scenes.

Ethernet Network Interface

Ethernet Network Interface

The C-Bus Ethernet Network Interface unit is a C-Bus system device designed to provide an isolated communications path between an Ethernet 10Base-T Network and a C-Bus Network. This allows high-speed control and monitoring of a

C-Bus installation via the TCP/IP protocols used in computer networks and by the Internet. System integrators and installers will also benefit from having remote access to the system. With the C-Bus Ethernet Network Interface unit, access to a single or multiple networks can be as close as the nearest Ethernet connection.

•

Remote access to Clipsal systems

•

Bridge multiple C-Bus networks together over LAN or WAN

•

Fully supports all Clipsal commands

•

Small size, mounts in standard DIN enclosure (4M wide)

•

Includes 12 Vdc power supply

Telephone Interface Unit

Telephone Interface Unit

C-Bus Telephone Interface Unit offers a dial-in and dial-out capability for control of a C-Bus system. Remote location override, monitoring, diagnostics and configuration of a C-Bus system is possible with this unit. The C-Bus Telephone

Interface Unit is programmed using a connection to a PC running TICA (Telephone Interface Commissioning

Application) configuration software. The interface can also act as a C-Bus PC Interface. The Telephone Interface Unit can be installed in a C-Bus 36 or 60M enclosure or as a wall mountable stand-alone item with connection to C-Bus.

•

Remote location override

•

Voice prompts and confirmation

•

Password protected

•

32 supported devices

•

Automatic dial out on present conditions

•

Local or remote site access to C-Bus system

•

Audio Out

5-16

DE-8

Discount

Schedule



All Rights Reserved


C-Bus™

System Units and Enclosures

Class 1250

Bar Code Reader

The C-Bus Bar Code Reader allows installers and integrators to quickly scan C-Bus devices with serial numbers and import them into C-Bus Toolkit software. Using a USB connection to a PC, users can easily identify and track C-Bus

Unit locations on a floorplan/network.

Network Analyzer

The C-Bus Analyzer is a C-Bus device designed to help an installer quickly analyze, detect, and troubleshoot potential problems on a C-Bus network. The device analyzes the network parameters and prompts the user for appropriate actions via its front LED (Light Emitting Diode) indicators.

Table 5.30: System Units

Catalog No.

SLC5500NB

SLC5500TPS

SLC5500HPS

SLC5500PC

SLC5500PCU

SLC5500PACA

SLC5500CN

SLC5100TUS

Accessories

SLC5100BCS

SLC5100NA


Network bridge

120 V Power supply, 350 mA

277 V Power supply, 350 mA

RS-232 PC Interface

USB PC Interface

Pascal Automation Controller

Ethernet Network Interface

Telephone Interface Unit

Bar Code Reader

C-Bus Network Analyzer

$ Price

663.00

500.00

500.00

488.00

488.00

586.00

664.00

898.00

604.00

328.00

8M Enclosure

12M Enclosure

24M Enclosure

8M Enclosure

The 8M enclosure is specifically designed for distributed applications. Suitable for surface mounting, the 8M enclosure consists of a box with a cover and a DIN rail for mounting one 8M or two 4M C-Bus units. The enclosure also has provisions for mounting neutral and ground bars.

•

Surface-mount NEMA 1 enclosure

•

Welded sheet steel with knockouts

•

Gray baked enamel, electrodeposited over cleaned, phosphatized steel

•

Triple-lead cover screws for fast installation of cover

•

DIN rail, suitable for mounting one 8M or two 4M C-Bus DIN modules

12M Enclosure

The 12M enclosure is specifically designed for distributed applications that require physical proximity between DIN units and keypads, sensors or controlled loads. Suitable for surface mounting, the 12M enclosure consists of a box with a cover and a DIN rail for mounting three 4M C-Bus units, one 8M unit plus one 4M unit or one 12M unit. The enclosure also has factory mounted neutral and ground bars.

•


•


•


•


•

DIN rail, suitable for mounting one 12M or three 4M C-Bus DIN modules

24M Enclosure

The 24M enclosure is specifically designed for distributed applications that require physical proximity between DIN units and keypads, sensors or controlled loads. Suitable for surface mounting, the 24M enclosure consists of a box with a cover and two rows for mounting C-Bus DIN-mounted C-Bus units. Each row can hold one 12M unit, one 8M unit plus one 4M unit, or three 4M untis. The enclosure also has provisions for additional neutral and ground bars.

•


•


•


•


•

DIN rail, suitable for mounting Clipsal DIN-mounted C-Bus units. Each row can hold one 12M unit, one 8M unit plus one 4M unit, or three 4M units

36M and 36MS Enclosure

The 36M and 36MS enclosures provide a multi-purpose means for housing various C-Bus DIN-mounted devices.

Suitable for flush or surface mounting, the enclosure consists of a mounting pan assembly, and a cover assembly. The box is to be ordered separately, allowing for its installation with the rough-in of field wiring. Enclosures feature:

•

NEMA 1 enclosure suitable for flush or surface mounting

•


•

Gray baked enamel paint, electrodeposited over cleaned, phosphatized steel

•


•

3 DIN mounting rails, each accommodating up to one 12M unit, one 8M unit with one 4M unit, or three 4M units

•

Complete with barriers for separation of Class 2 circuits from line voltage (36M only)

•

The 36MS offers a reduced footprint than the 36M

36M Enclosure


All Rights Reserved

DE-8

Discount

Schedule


5-17

C-Bus™

5-18

Area Lighting Panel

Enclosures and System Devices


60M Enclosure

The 60M enclosure provides a means for housing DIN style relays and dimmers. Suitable for flush or surface mounting, the enclosure consists of a mounting pan assembly, and a cover assembly. The box is to be ordered separately, allowing for its installation with the rough-in of field wiring. Enclosures feature:

•

NEMA 1 enclosure suitable for flush or surface mounting

•


•

Gray baked enamel paint, electrodeposited over cleaned, phosphatized steel

•


•

5 DIN mounting rails, each accommodating up to one 12M unit, one 8M unit with one 4M unit, or three 4M units

•

Complete with barriers for separation of Class 2 circuits from line voltage

Table 5.31: Enclosures and Accessories

Catalog No.

8M Enclosure

SLC8M

12M Enclosure

SLC12MSG

24M Enclosure

SLC24MSG

36MS Enclosure

SLC36SC

SLC36MSFG

SLC36MSFW

SLC36MSSG

36M Enclosure

SLC36C

SLC36MFG

SLC36MFW

SLC36MSG

60M Enclosure

SLC36C

SLC60MFG

SLC60MFW

SLC60MSG

Accessories

PK7GTA

PKGTAB

SLC4CSF8


C-Bus single row enclosure, surface mount

C-Bus single row enclosure, surface mount

C-Bus dual row enclosure, surface mount

C-Bus box for small three row interior

C-Bus small three row interior with flush gray cover

C-Bus small three row interior with flush white cover

C-Bus small three row interior surface mount gray cover

C-Bus box for three and five row interiors

C-Bus three row interior with gray cover, flush mount

C-Bus three row interior with white cover, flush mount

C-Bus three row interior surface gray

C-Bus box for three and five row interiors

C-Bus five row interior with gray cover, flush mount

C-Bus five row interior with white cover, flush mount

C-Bus five row interior surface gray

$ Price

110.00

120.00

240.00

120.00

690.00

690.00

690.00

136.00

740.00

740.00

740.00

136.00

1233.00

1233.00

1233.00

Ground/Neutral Bar

Neutral Insulator Kit

Filler Plate, 4M

7.80

29.20

18.00

Area Lighting Panels

C-Bus Area lighting Panels are ideally suited to meet lighting control energy code requirements in classrooms, offices and other small spaces. Area Lighting Panels are designed to be used with C-Bus input units, including: keypads, sensors (occupancy and light level detection) and touch screens. A simple CAT-5 cable is all that is required for connecting of these devices.

C-Bus Area Lighting Panels provide on/off switching, stepped dimming or continuous dimming. All relays feature rugged 20 A rated contacts for switching electronic ballast loads. Models with continuous dimming capabilities are available with phase angle or 0–10 V control. C-Bus Area Lighting Panels can operate independently or as part of an entire facility wide lighting control system. Enclosures can easily be mounted in electrical closets or in ceiling spaces. They include all necessary connections and are UL

®

Listed. Area

Lighting Panels can also be used in conjunction with Powerlink™ panels.

•

Relay models: Four (4) or Eight (8) channel relay outputs, rated 20 A

•

Phase Angle Dimmer Model: Four (4) channels of 4 A outputs for incandescent lighting loads.

•

0–10 V outputs available for control of compatible 0–10 V dimmable fluorescent ballasts, or LED drivers

•

Integral neutral and ground bar terminal strips

•

Meets NEC 300.22 requirements to be installed above ceilings and other spaces that handle environmental air

•

Bypass mode to facilitate quick start up

•

Meets NEC Article 409

•

UL Listed 508 A

Table 5.32: C-Bus Area Lighting Panels

Catalog No.


4 Channel 20 A Relay Models

SLCZ042000T 4 Channel 20 A Relay @ 120 V with power supplya

SLCZ042000H 4 Channel 20 A Relay @ 277 V with power supplya

SLCZ042000TP 4 Channel 20 A Relay @ 120 V without power supply

SLCZ042000HP 4 Channel 20 A Relay @ 277 V without power supply

8 Channel 20 A Relay Models

SLCZ082000T

SLCZ082000H

8 Channel 20 A Relay @ 120 V with power supplya

8 Channel 20 A Relay @ 277 V with power supplya

SLCZ082000TP 8 Channel 20 A Relay @ 120 V without power supply

SLCZ082000HP 8 Channel 20 A Relay @ 277 V without power supply

1769.00

1769.00

1675.00

1675.00

2646.00

2646.00

2462.00

2462.00

4 Channel 20 A Relay Models with 0-10 V Output Units

SLCZ04204AT 4 Channel 20 A Relay @ 120 V with power supply and 4 Channel 0–10 V Output Unita

SLCZ04204AH 4 Channel 20 A Relay @ 277 V with power supply and 4 Channel 0–10 V Output Unita

SLCZ04204ATP 4 Channel 20 A Relay @ 120 V without power supply and 4 Channel 0–10 V Output Unit

SLCZ04204AHP 4 Channel 20 A Relay @ 277 V without power supply and 4 Channel 0–10 V Output Unit

4 Channel 20 A Phase Angle Dimmer Models

SLCZ00004DT 4 Channel 20 A Phase Angle Dimmer @ 120 V with C-Bus power supplya

SLCZ00004DTP 4 Channel 20 A Phase Angle Dimmer @ 120 V without C-Bus power supply

4 Channel 20 A Relay Models with Phase Angle Dimmer Units

2492.00

2492.00

2308.00

2308.00

1144.00

920.00

SLCZ04204DT 4 Channel 20 A Relay @ 120 V with C-Bus power supply and 4 Ch. Phase Angle Dimmer Unita 2630.00

SLCZ04204DTP 4 Channel 20 A Relay @ 120 V without C-Bus power supply and 4 Ch. Phase Angle Dimmer Unit 2182.00

a For stand-alone applications order unit with power supply.

DE-8

Discount

Schedule



All Rights Reserved


C-Bus™

Schedule Plus Software Screen Captures

Software Packages

Class 1250

C-Bus Toolkit Software

The C-Bus Toolkit Software includes the C-Bus Installation and programming Software,

Project Manager, and C-Bus Calculator. The software works under Windows™ 98, ME,

2000 and XP and supports a unique barcode scanning feature. This allows the installer to scan the C-Bus packaging of each new unit to add the unit to the database. The software prints adhesive labels that can be affixed to building plans. These labels include the Unit

Address and the physical location that the unit is to be installed. Labels are duplicated so that one label can be affixed to the unit and one to the electrical plan for the installation. The labels have barcodes on them so that units can be easily re-identified if required.

NOTE: C-Bus Toolkit Software is a free download from http://www.schneider-electric.us/solutions/lighting-and-whole-home-control/

Schedule Plus Software V.4

C-Bus Schedule Plus Version 4 includes a number of major features, including enhanced scheduling features, support for monitoring load run times, load power and energy consumed, support for fully customizable multilevel, password protected, access level control, support for sunrise and sunset times, support for daylight saving times, support for

128 bit encrypted secure Internet connectivity allowing control and monitoring via any Web

Browser. The software also includes a graphic display as well as a fully featured programmable logic engine. The USB Code Key works under Windows XP Home, XP

Professional, Server 2003, Vista Ultimate, Vista Business and Vista Enterprise.

NOTE: An evaluation version of Schedule Plus is available for download by going to http://www.schneider-electric.us/solutions/lightingand-whole-home-control/ and clicking Software Downloads in the far-left column.

HomeGate Software V.4

Residential application PC control of a C-Bus Control System. C-Bus HomeGate Version 4 includes a number of major features, including support for 128 bit encrypted secure Internet connectivity allowing control and monitoring via any Web Browser, irrigation system control feature, enhanced scheduling features, support for sunrise and sunset times, support for daylight saving times. The software also includes a fully featured programmable logic engine. The C-Bus USB Key works under Windows XP Home, XP Professional, Server

2003, Vista Ultimate, Vista Business and Vista Enterprise.

NOTE: An evaluation version of HomeGate is available for download by going to http://www.schneider-electric.us/solutions/lightingand-whole-home-control/ and clicking Software Downloads in the far-left column.

Installer License Key

The C-Bus Software Installer License Key is a valuable tool for installers to create/commission projects using C-Bus Version 4 Schedule Plus & HomeGate software.

This code key is time restricted and allows the software to operate in ‘normal’ mode for anywhere between 48 to 72 hours per use (the software then returns to evaluation/demo mode).

NOTE: The installer code key will also be compatible with future software releases.

Table 5.33:

Catalog No.

Schedule PlusV. 4

SLC5000SDSP24

SLC5000SDSP104

SLC5000SDSPU4

HomeGate V. 4

SLC5000SDHG24

SLC5000SDHG104

SLC5000SDSP24


License Key for 2 Networks


License Key for Unlimited Networks



Installer key for Schedule Plus or Homegate (unlimited networks)

$ Price

792.00

1680.00

2665.00

352.00

680.00

389.00

HomeGate Software Screen Captures


All Rights Reserved

DE-8

Discount

Schedule


5-19


Wall Switch

Occupancy

Sensor

Commercial Grade

Wall Switch

Blank Cover Plate with decorator style opening

Toggle Cover Plate with decorator style opening

Basic Wall Switch Occupancy Sensors

Wall Switch Occupancy Sensors are ideally used in commercial buildings to save energy that would otherwise be wasted to light unoccupied rooms or spaces. These

Wall Switch Occupancy Sensors employ the latest in passive infrared (PIR) sensing technology to accurately sense when a room or space is occupied, then turn lights on. When the room is unoccupied, the sensor turns lights off after a time delay of up to 30 minutes as determined by the user. Auto-ON and Manual-ON models available with decorator wall plate in White, Ivory or Light Almond.

Simply mount the sensor in place of existing single gang switch — no neutral connection required. Special multisegmented lens creates a coverage pattern that accurately detects major motion in rooms up to 1000 sq. ft.

•

Input: 120/277 Vac 60 Hz

•

Output: 1000W Max. Load @ 120 V (1000 VA@120 V

1800 VA@277 V)

•

1/4 HP Max. Motor Load

•

UL and cUL Listed

•

For use with electronic and magnetic ballasts

•

CEC Title 24 Certified

Commercial Grade Wall Switch Occupancy

Sensors

Maximum energy savings in a format that will complement any decor. Low profile sensors are available in white, ivory, gray, light almond and black with color-matched segmented lens.

Light Level Sensor Mode: Each sensor includes an adjusatble light level sensor to hold off artificial lighting when adequate natural light is present.

Walk-Through Mode: To maximize energy savings, the sensor detects when areas are briefly occupied as a result of a person walking through and turns off lighting based on a shorter time delay. Walk-Through Mode is available on single and dual circuit units.

Lamp Saver Mode: When the lamp saver feature is enabled, the sensor automatically alternates which load responds to motion. The result is more predictable lamp life and reduced maintenance. (Dual circuit only)

Adaptive Technology: Commercial Grade dual technology and ultrasonic wall switch occupancy sensors feature a patented adaptive technology that significantly reduces the learning period typically associated with adaptive sensors. Adaptive Sensors from Schneider

Electric reduce the occurrence of nuisance on and nuisance off while at the same time extending lamp life and reducing maintenance.

•

Available in white, ivory, gray, light almond and black with matching cover plate (included)

•

Color matching multi-segmented lens

•

Audible alert

•

Selectable auto-on and manual-on modes

•

Red LED motion indicator

•

For use with electronic and magnetic ballasts

•

1000 VA@120 V, 1800 VA@277 V

•

User adjustable light level, time delay, and sensitivity

•

30 second grace period in the manual-on mode

Residential Wall Switch Vacancy Sensors

The Residential Vacancy Sensor directly replaces standard light switches in bathrooms, garages, laundry rooms and utility rooms in accordance with Title 24 2005 requirements for residential lighting (Sections 119(d) and 150 (k)).

Vacancy Sensors from Schneider Electric operate just like a standard light switch, requiring a button press to turn lights on. Lights may be turned off with a button press or the sensor will turn off lighting automatically when the area is unoccupied.

•

No user time delay and sensitivity adjustments necessary

•

Available in White, Ivory or Light Almond

•

Furnished with cover plate

•

Manual On/Manual Off or Automatic Off operation

•

No neutral or minimum load required



•

Rated for both 120 V incandescent and fluorescent lighting

•

Title 24 2005 Residential Lighting requirements, Sec. 150(k)

•

No override on

•

Manual-on only (no auto-on mode)

•

30 minute time delay

Table 5.34:

Catalog No.


Basic Wall Switch Occupancy Sensors

$ Price

Auto-ON/Auto-OFF

SLSPWS1277AL Light Almond Wall Switch Occupancy Sensor

SLSPWS1277AW White Wall Switch Occupancy Sensor

SLSPWS1277AI Ivory Wall Switch Occupancy Sensor

Manual-ON/Auto-OFF

SLSPWS1277ML Light Almond Wall Switch Occupancy Sensor

SLSPWS1277MW White Wall Switch Occupancy Sensor

SLSPWS1277MI Ivory Wall Switch Occupancy Sensor

Residential Vacancy Sensor

SLSPWS120VL Wall switch vacancy sensor, light almond

SLSPWS120VI Wall switch vacancy sensor, ivory

SLSPWS120VW Wall switch vacancy sensor, white

Commercial Grade Wall Switch Occupancy Sensors

81.00

81.00

81.00

62.00

62.00

62.00

42.00

42.00

42.00

Single Circuit PIR

SLSPWS1277UW White

SLSPWS1277UI Ivory

SLSPWS1277UG Gray

SLSPWS1277UL Light Almond

SLSPWS1277UB Black

Dual Circuit PIR

SLSPWD1277UW White

SLSPWD1277UI Ivory

SLSPWD1277UG Gray

SLSPWD1277UL Light Almond

SLSPWD1277UB Black

Single Circuit Ultrasonic

SLSUWS1277UW White

SLSUWS1277UI Ivory

SLSUWS1277UG Gray

SLSUWS1277UL Light Almond

SLSUWS1277UB Black

Dual Circuit Ultrasonic

SLSUWD1277UW White

SLSUWD1277UI Ivory

SLSUWD1277UG Gray

SLSUWD1277UL Light Almond

SLSUWD1277UB Black

Single Circuit Dual Technology

SLSDWS1277UW White

SLSDWS1277UI Ivory

SLSDWS1277UG Gray

SLSDWS1277UL Light Almond

SLSDWS1277UB Black

Dual Circuit Dual Technology

SLSDWD1277UW White

SLSDWD1277UI Ivory

SLSDWD1277UG Gray

SLSDWD1277UL Light Almond

SLSDWD1277UB Black

Blank Cover Plates

90.00

90.00

90.00

90.00

90.00

117.00

117.00

117.00

117.00

117.00

142.00

142.00

142.00

142.00

142.00

165.00

165.00

165.00

165.00

165.00

187.00

187.00

187.00

187.00

187.00

210.00

210.00

210.00

210.00

210.00

SLSWP2DBW White

SLSWP2DBI Ivory

SLSWP2DBG Gray

SLSWP2DBL Light Almond

SLSWP2DBB Black

Toggle Cover Plates

SLSWP2DTW White

SLSWP2DTI Ivory

SLSWP2DTG Gray

SLSWP2DTL Light Almond

SLSWP2DTB Black

Buttonless Cover Plates

SLSBCW

SLSBCI

SLSBCG

SLSBCL

SLSBCB

7.50

7.50

7.50

7.50

7.50

7.50

7.50

7.50

7.50

7.50

Buttonless Adjustment Access Covers, White

Buttonless Adjustment Access Covers, Ivory

Buttonless Adjustment Access Covers, Gray

15.00

15.00

15.00

Buttonless Adjustment Access Covers, Light Almond 15.00

Buttonless Adjustment Access Covers, Black 15.00

5-20



All Rights Reserved



All Rights Reserved


Dual Technology Wall Mount

Dual Technology Ceiling Mount

Power Pack


Class 1200

Wall Mount Occupancy Sensors

Wall Mount Occupancy Sensors from Schneider Electric accurately detect occupancy and automatically switch lighting on and off as needed. These sensors are wall or ceiling mounted for superior motion detection. Sensors employ Passive Infrared (PIR) and

Ultrasonic technology. Dual Technology model features combined PIR and Ultrasonic detection for the ultimate performance. The PIR Occupancy Sensor has 3 interchangeable lenses for custom coverage patterns. Wide Angle, Long Range and High Bay. Wall mount sensors also incorporate an integral light level sensor, and features an isolated relay for use with building automation, security and HVAC systems.

•

Adjustable Sensitivity

•

Adjustable time delay

•

UL and cUL Listed

•


•

FCC Part 15, Class B

•

ASHRAE/IES 90.1

Table 5.35: Wall Mount Occupancy Sensors

Catalog No.

SLSWPS1500

SLSWUS1500

SLSWDS1500


PIR occupancy sensor

Ultrasonic occupancy sensor

Dual Technology occupancy sensor

$ Price

161.00

191.00

221.00

Ceiling Mount Occupancy Sensors

Ceiling Mount Occupancy Sensors are ideal for offices, conference rooms, class rooms and other shared areas to automatically turn lights on and off based on occupancy. Sensors employ Passive Infrared (PIR) and Ultrasonic technology. Dual Technology model features combined PIR and Ultrasonic detection for the ultimate performance. Requires power pack.

Set of normally closed and normally opened auxiliary contacts for use with building automation and security systems.

•

Input: 24 Vdc

•

Output: +24 Vdc

•

Adjustable Sensitivity

•

Low Profile Housing

•

Adjustable Light Level Sensor

•

UL and cUL Listed

•


•

FCC Part 15, Class B

•

ASHRAE/IES 90.1

Table 5.36: Ceiling Mount Occupancy Sensors

Catalog No.

SLSCPS1000

SLSCUS2000

SLSCDS2000

SLSCUS800

SLSCDS800


PIR occupancy sensor

Ultrasonic occupancy sensor

Dual Technology occupancy sensor

180 Degree Ultrasonic sensor

180 Degree Dual Technology Sensor (PIR and Ultrasonic Sensors combined)

$ Price

134.00

197.00

231.00

129.54

141.76

Power Pack

For use with wall and ceiling mount sensors to supply power to sensor and switch the load when the sensor detects occupancy. May supply power to multiple sensors and auxiliary relays up to 100 mA nominal load.

•

Input: 120/277 Vac 50/60 Hz

•

Output: 24 Vdc/100 mA Nom.

•

Relay rating: 20 A Max. Ballast Load at 120 Vac (20 A Max. at 277 V)

•

UL cUL Listed

In Canada:

•

Input: 347 Vac60 Hz

•

Output: 24 Vdc/150 mA Nominal

•

Relay rating: 15 A Max. Ballast Load at 347 Vac (15 A Max. at 5200 watts)

•

UL cUL Listed

Auxiliary Relay

For use with wall and ceiling mount sensors to turn lights on when an area is occupied or off when it is not. Requires power pack to supply input power to operate relay.

•

Input: 24 Vdc/36 mA Nom.

•

Relay rating: 20 A Max. Ballast Load at 120 Vac (20 A Max. at 277 V)

•

UL cUL Listed

In Canada:

•

Input: 24 Vdc/2 mA Nominal

•

Relay rating: 15 A Max. Ballast Load at 347 Vac

Table 5.37: Power Pack and Auxiliary Relay

Catalog No.

SLSPP1277

SLSSP24

SLSPP1347

SLSSP24347


120–277 Vac Power Pack

120–277 Vac Auxiliary Relay

347 Vac Power Pack

347 Vac Auxiliary Relay

$ Price

46.50

36.00

47.50

36.00

5-21



UL 924 Emergency Control Device

5-22

Indoor Occupancy Sensor

Fluorescent High Bay Sensor



Fixture Mounted Sensors and Controls

Schneider Electric extends its occupancy-sensing capability with a range of line voltage sensors based on passive infrared (PIR) technology. These sensors feature rugged housings that resist moisture and dust typical of manufacturing and shipping dock areas. Sensors incorporate universal power supply, relay and PIR element in a single housing ready for direct attachment to popular high-bay and low-bay luminaires.

Sensors are available either as stand alone sensor-per-fixture devices or equipped with connectors for low-cost plastic optical fiber cable. Plastic optical fiber connectivity between sensors allows implementation of control zones within aisles and work areas without back-pulling signaling wire in conduit. Each sensor acts as a network repeater, allowing 200 foot spacing between sensors. Plastic fiber can be cut and terminated without special tools or installer training.

•

All sensors feature oversized Fresnel lenses and premium, low-noise pyroelectric elements for reliable PIR sensing at mounting heights up to 45 feet.

•

Both area- and aisle-sensing Fresnel lenses ship with each sensor. Color-coded snap-out lenses can be swapped in the field.

•

Switch packs open and close based on fiber optic commands from fiber sensors

•

Universal power supply design adapts to 120–480 Vac, 50/60 Hz without jumpers or taps.

•

Single-pole/close-on-motion relays sized for switching dry contact, magnetic HID or electronic ballast loads.

•

Mounts directly to reflector with included pinch bracket or to ballast housing with ” NPT threaded pipe nipple.

•

Built-in manual override test switch and diagnostic LED to assist in installation. Diagnostic LED can be seen at distance to assist in walk test.

•

Fifteen minute power ON warm-up timer assures rated lamp life even if the fiber network is broken.

•

User adjustable sensitivity and delay time settings (0–15 minutes)

Table 5.38: Table Line Voltage Occupancy Sensors

Catalog No.

SLSPIP210

SLSPIP210CT

SLSPIP210EB

SLSPIP210EBCT

SLSPIP211

SLSPIP212

SLSPSP101

SLSPSP102

SLSPCW001

SLSPIPBRACKET


Occupancy sensor, indoor PIR, no fiber connectivity

Occupancy sensor, indoor PIR, no fiber, cold temperature

Occupancy sensor, indoor PIR, no fiber, electronic ballast

Occupancy sensor, indoor PIR, no fiber, electronic ballast cold temperature

Occupancy sensor, indoor PIR, one fiber input, one fiber output

Occupancy sensor, indoor PIR, two fiber inputs

Fiber optic switch pack, indoor, one fiber in, one fiber output

Fiber optic switch pack, indoor, two fiber inputs

Fixture-mounted counterweight for HID

Bracket for off-fixture mounting

$ Price

141.00

174.00

141.00

174.00

166.00

166.00

141.00

141.00

13.00

11.00

Fluorescent High Bay Sensors

The SLSFPS1347 and SLSFPS1480 Occupancy Sensors are Class 1, fixture mounted, 360° high bay occupancy sensors. They are designed to operate directly with T5 and T8 fluorescent fixtures that use single or multiple electronic ballasts. Motion is detected using passive infrared technology (PIR). The operation voltage range for the SLSFPS1347 Sensor is 120–347 V. The SLSFPS1480 Sensor operates at

480 V.

Features

•

Includes a user-adjustable time dial to set the length of time the luminaires stay on from 15 seconds to 30 minutes.

•

Includes a user-adjustable range dial to customize PIR sensitivity.

•

Includes a user-adjustable time dial to set the length of time the luminaires stay on from 15 seconds to 30 minutes.

•

Includes a user-adjustable range dial to customize PIR sensitivity.

•

90 degree rotating lens for a variety of aisle-way applications.

•

High bay area, low bay area, and high bay aisle lenses provided.

•

18 minutes time-out preset for maximum energy to lamp life savings.

Table 5.39: Specificiations

Catalog No.

SLSFPS1347

SLSFPS1480


120–347 Vac High bay Occupancy Sensor

480 Vac High Bay Occupancy Sensor

$ Price

78.00

89.00

UL 924 Emergency Control Devices

Schneider Electric UL 924 Emergency Lighting Control Devices provide the ability to use and control standard fixtures for emergency and standard lighting. The use of UL 924 emergency lighting control device, under normal operating power the devices turn on and off emergency lighting along with standard lighting in an area.

In the event of normal power loss the UL 924 emergency lighting control devices detect the power loss, and will automatically transfer emergency power to the fixtures. This provides emergency lighting through standard fixtures. Schneider Electric provides a wide selection of UL 924 emergency lighting control devices that work with occupancy and dimming based lighting control.

Features

•

Saves energy by controlling Emergency Lighting

•

Multiple mounting methods

•

Convenient test switch

•

Works with occupancy or dimmer controls

•

Visible Power LED

•

Easy to install

Table 5.40: Specificiations

Catalog No.

SLSEDC120

SLSEDC277

SLSEPMC120

SLSEPMC277

SLSERC1277


UL 924 Emergency Lighting Dimmer Control 120 Vac

UL 924 Emergency Lighting Dimmer Control 277 Vac

UL 924 Emergency Lighting Control Relay Panel Mount 120 Vac

UL 924 Emergency Lighting Control Relay Panel Mount 277 Vac

UL 924 Emergency Lighting Control Relay 120/277 Vac

$ Price

700.00

700.00

300.00

300.00

300.00


All Rights Reserved



Powerlink available in column width design


All Rights Reserved

Powerlink™ Lighting

Control Systems

Gen 3 Products

Class 1210

Powerlink G3 systems are ideally suited for controlling lighting and other loads in commercial, institutional, and industrial facilities. Such systems are typically used to lower utility cost by switching branch circuits OFF during non-occupied periods when lighting is unnecessary or during peak demand periods when a partial reduction in load can save significant money.

These systems utilize remotely operated circuit breakers to switch branch circuits ON and

OFF via a time schedule or by an externally generated signal (typically a low voltage wall switch, photocell, access system, fire alarm or building management system). All Powerlink components mount inside a standard lighting panelboard to provide a compact, space saving installation.

Powerlink G3 systems feature a powerful microprocessor based controller that provides system intelligence for 168 remotely operated branch circuits. Master panelboards contain the control electronics, power supply, and control bus strips for up to 42 branch circuit breakers. Slave panels extend the capability of the system by allowing remotely operated branch circuit breakers to be operated from the master controller via a simple, 4-wire, sub-net connection.

All Powerlink G3 systems have the capability of being networked together and operated from a central workstation or via a remote modem connection. Powerlink software allows users to remotely configure the system, change time schedules, monitor circuit breaker or input status, and override zones and breakers.

Up to eight panels can be controlled from a single controller.

BACnet Capability

The Building Automation and Control network (BACnet) communication protocol is incorporated into the Powerlink™ G3 controller design. The addition of the BACnet protocol allows Powerlink panels to be easily integrated into a Building Automation System (BAS) employing this open communication standard without the need for communication bridges or gateways.

Controller Models

The following Powerlink G3 controller models support ‘native’ BACnet communications:

•

NF2000G3 — Ethernet communications, shared remote inputs, network time synchronization

•

NF3000G3 — Email upon alarm, onboard web pages for status/control/configuration

•

NF3000G3C — C-Bus communications (ability to interface with a Clipsal™ lighting control network)

Factory Assembled System

The following factory engineered pricing procedure may be used to price either 240 V or

480Y/277 V Powerlink G3 systems:

•

Select system type and interior size from Table 5.43 on 5-24. All Powerlink G3 panels are furnished with either 1 or 2 control bus strips.

•

Select panelboard base price from Table 5.44. All Powerlink G3 panels use NF type panelboard interiors, boxes, and trims and are suitable for either 240 V or 480Y/277 V systems.

•

Select branch circuit breaker requirements from Table 5.45. Powerlink G3 panels can accommodate both ECB-G3 remotely operated circuit breakers and EDB, EGB and EJB standard branch circuit breakers.

•

Refer to panelboard section for additional panelboard accessories.

•

For complete price, order by description.

•

Apply appropriate discount schedule.

240 V Factory Assembled System Example:

500 level system with 225 A MLO panelboard rated for 208Y/120 V, 3Ø4W, 10kAIR,

Type 1, surface mount with ground bar and (12) 20 A 1-pole bolt-on remote operated circuit breakers.

Table 5.41:

Item

System Type: 500 controller with 12 ckt bus

Panel type: 250 A MLO

Branch circuit breakers: (12) 20 A 1-pole

Ground bar

Total price

Table 5.42:

Page No.

5-24

5-26

5-26

5-26

$ Price

5074.00

864.00

2628.00

28.50

8594.50

Feature

500

System Level

1000 2000 3000

Inputs

2 - wire

2 - wire with status feedback

3 - wire

Time Scheduler

7 day, each configurable

Daily on/off periods

Holiday events

Automatic daylight savings

Sunrise/sunset tracking

Networking

Modbus™ ASCII/RTU

Modbus TCP

Johnson Controls N2

DMX

C-Bus

BACnet MSTP/IP a Specify N2 suffix b Specify C suffix

X

—

—

—

—

—

—

—

—

—

—

8

8

8

16

8

8

X

X

— a

X

—

—

16

24

32

X

X

16

8

8

X

X

—

X

—

X

16

24

32

X

X

16

8

8

X

X

—

X

Xb

X

16

24

32

X

X

5-23



Control Systems

5-24

ECB-G3 Circuit Breaker

Control Bus

Gen 3 Products


Table 5.43: ECB-G3 Circuit Breakers Bolt-On Remotely Operated

Ampere

Rating

15

20

30

One-Pole

27 7 Vac – 14,000 AIR

120 Vac – 65,000 AIR

Catalog

Number

ECB14015G3c

ECB14020G3c

ECB14030G3

$ Price

237.00

Two-Pole

480Y/277 Vac – 14,000 AIR

120/240 Vac – 65,000 AIR

240 Vac – 14,000 AIR Ground B Phase

Catalog

Number

ECB24015G3c

ECB24020G3c

ECB24030G3

$ Price

558.00

Three-Pole

480Y/277 Vac – 14,000 AIR

240 Vac – 42,000 AIR

Catalog

Number

ECB34015G3c

ECB34020G3c

ECB32030G3d

$ Price

890.00

Table 5.44: ECB-G3 Circuit Breakers for Emergency Lighting

(requires 2-pole spaces)

One-Pole 480 Y/277 – 14,000 AIR 240 V – 65,000 AIR

Ampere Rating

Catalog No.

$ Price

20 ECB142020G3EL 558.00

Note: All are listed as HACR type for use with air conditioning, heating and refrigeration equipment having motor group combinations and marked for use with HACR type circuit breakers. UL listed as HID rated for use with high intensity discharge lighting systems.

(1) #12–8 Al or (1) #10–8 Cu. Suitable for use with 75°C conductors.

c UL listed as SWD (switching duty) rated.

d Rated for 240 Vac only – 42,000 AIR

Table 5.45: Control Bus

Max. No. of Control

Circuits

12

12

18

18

21

21

Required

Interior Size

30

30

42

42

54

54

Table 5.46: Power Supply

Voltage

120 V

240 V

277 V

120 V

240 V

277 V

Primary Source

Panel Bus

Panel Bus

Panel Bus

External

External

External

Table 5.47: Controller

Description

500

1000

1000N2 (N2 protocol)

2000

3000

3000C (C-bus

Panel Orientation

Left

Right

Left

Right

Left

Right

Catalog No.

NF120PSG3

NF240PSG3

NF277PSG3

NF120PSG3L

NF240PSG3L

NF277PSG3L

Catalog No.

NF500G3

NF1000G3

NF1000G3N2

NF2000G3

NF3000G3

NF3000G3C

Catalog No.

NF12SBLG3

NF12SBRG3

NF18SBLG3

NF18SBRG3

NF21SBLG3

NF21SBRG3

$ Price

851.00

1065.00

1163.00

$ Price

791.00

899.00

$ Price

1946.00

3968.00

8288.00

7107.00

9741.00

9741.00

Power Supply

Table 5.48: Remote Source Controller (for additional inputs)—

Includes NEMA 1 enclosure, source controller and power supply

Voltage

120 V

240 V

277 V

Catalog No.

RSC16G3120

RSC16G3240

RSC16G3277

NF3000G3 Controller

Table 5.49: Cables & Accessories

Description

Control bus cables

Harness standard panel

Catalog No.

NF2HG3

Sub-net accessories & cables

Slave address selectore

6’ sub-net cable

10’ sub-net cable

25’ sub-net cable

50’ sub-net cable

Serial cables

NFSELG3

NFSN06

NFSN10

NFSN25

NFSN50

Controller front panel cable NFFPCG3 e One slave address selector required for each slave panel.

Powerlink Software

Table 5.50: Miscellaneous Hardware

Description

Circuit Breaker Handle Padlock (Lock On or Off)

Fixed Barrier

Remote Mounting Adapter f DE2 Discount

Catalog No.

HPAFD f

NFASBKG3

NFADAPTERG3

Table 5.51: Software

LCSAdvanced Software

Description Catalog No.

LCSADVANCED

LCSBasic Software

Powerlink Controller Softwareg g N2 supported controllers. All other controllers use LCSAdvanced or LCSBasic.

LCSBasic

PCS101

DE-8A DE2

Discount

Schedule


$ Price

$ Price

3045.00

3045.00

3045.00

$ Price

25.50

177.00

102.00

$ Price

4000.00

1500.00

1523.00


All Rights Reserved

89.00

173.00

75.00

105.00

234.00

405.00

102.00



Control Systems

Remote Mount Controller

Device Power Supply

Powerlink Device Router

Gen 3 Products

Class 1210

Table 5.52: Remote Mount Controller (for externally mounted electronics

Includes NEMA 1 enclosure, controller, and power supply

Voltage

120 V

240 V

277 V

120 V

240 V

277 V

120 V

240 V

277 V

120 V

240 V

277 V

120 V

240 V

277 V

120 V

240 V

277 V

Catalog No.

RMC500G3120

RMC500G3240

RMC500G3277

RMC1000N2G3120

RMC1000N2G3240

RMC1000N2G3277

RMC1000G3120

RMC1000G3240

RMC1000G3277

RMC2000G3120

RMC2000G3240

RMC2000G3277

RMC3000G3120

RMC3000G3240

RMC3000G3277

RMC3000G3C120

RMC3000G3C240

RMC3000G3C277

Controller Type

NF500G3

NF500G3

NF500G3

NF1000N2G3

NF1000N2G3

NF1000N2G3

NF1000G3

NF1000G3

NF1000G3

NF2000G3

NF2000G3

NF2000G3

NF3000G3

NF3000G3

NF3000G3

NF3000G3C

NF3000G3C

NF3000G3C

$ Price

4272.00

4272.00

4272.00

10615.00

10615.00

10615.00

6990.00

6990.00

6990.00

9860.00

9860.00

9860.00

12680.00

12680.00

12680.00

12680.00

12680.00

12680.00

Device Power Supply

The Powerlink Device Power Supply is used to distribute power on a C-Bus™ network.

Placed at critical points on the network, device power supplies will provide the current necessary for operating a variety of passive C-Bus devices. A Powerlink Device

Power Supply consists of an 8M enclosure containing one or two 4M Power Supplies

(120 or 277 Vac).

•

Surface-mount NEMA 1 enclosure, with cover

•

Unit and C-Bus LEDs indicate the status of the line voltage and the network

•

Sources up to 700 mA (dual power supplies) to the C-Bus network

•

120 V or 277 Vac models available

•

Dimensions: 8.9 in. (226mm) wide x 3.8 in. (97mm) deep x 12.57 (319mm) tall

Device Router

The Powerlink Device Router allows the exchange of data between a Powerlink

NF3000G3C controller and C-Bus devices. This device router receives data from C-Bus input devices such as keypads and touchscreens and sends data to the Powerlink system and isa versa. The device router consists of a C-Bus 8M enclosure containing a C-Bus PC

Interface and a C-Bus Power Supply (120 Vac or 277 Vac). Communication between the device router and the NF3000G3C controller is made with the included 50-foot serial cable.

•

Surface-mount NEMA 1 enclosure, with cover

•

Unit, Unit/Comms, and C-Bus LEDs indicate the status of data transmission and power to the unit and the network

•

System network clock for synchronizing communications data

•

Network power source, supplying up to 350 mA

•

120 Vac or 277 Vac models available

•


Table 5.53: Powerlink Device Routersa

Description

120 V Device Router

277 V Device Router a Required for interface to Clipsal units.

b DE-8 Discount.

Table 5.54: Powerlink Device Power Suppliesc

Catalog No.

NFDR120G3C b

NFDR277G3C b

Description

Single Supply 120 V

Dual Supply 120 V

Single Supply 277 V

Dual Supply 277 V

Filler Plate c Extends C-Bus power to Clipsal devices.

d DE-8 Discount.

Powerlink Network Accessories

Catalog No.

NFDP1120G3C d

NFDP2120G3C d

NFDP1277G3C d

NFDP2277G3C d

SLC4CSF8

$ Price

1632.00

1632.00

$ Price

900.00

1650.00

900.00

1650.00

27.00

Table 5.55: Powerlink Network Accessories

Description

RS232/485 Converter

Catalog No.

6382RS485G3KIT

$ Price

526.50

Table 5.56: Powerlink Remote Modem Supporte

Description Catalog No.

$ Price

Modem Kit (for G3 Controllers) 6382G3MODEM e Requires 2000 and 3000 controller and either Analog or Ethernet modem connection to each master panel.

876.00


All Rights Reserved

DE-8 DE-8A

Discount

Schedule


5-25


Control Systems


G3 NF Panelboards 240 V and 480 Y/277 V Factory

Assembled Systems

Maximum Voltage 480 Y/277 Vac

Table 5.57: Powerlink G3 System Price

30 ckt Interior 42 ckt Interior 54 ckt Interior

List

System Type 12 ckt bus

24 ckt bus

18 ckt bus

36 ckt bus

21 ckt bus

Slave Panel

NF500G3

NF1000G3d

NF2000G3

1650.00

6753.00

10728.00

17298.00

3450.00

8553.00

12528.00

19098.00

2025.00

7128.00

4200.00

9303.00

11103.00

13278.00

17673.00

19848.00

2370.00

7473.00

11448.00

18018.00

NF3000G3 21072.00

22872.00

21447.00

23622.00

21792.00

NOTE: Powerlink EM option BCPM list price adder.

Table 5.58: Panelboard Base Price (including solid neutral)

42 ckt bus

4890.00

10143.00

14118.00

20688.00

24462.00

Main Circuit Breaker (Circuit Breaker Interrupting Rating—6-2 through 6-8)ae

Mains

Rating

Main Lugs

Standard IC HIC

100 A

125 A

150 A

225 A

250 A

400 A

2-pole

—

1269.00

—

—

1503.00

1989.00

3-pole

—

1458.00

—

—

1728.00

2286.00

Circuit

Bkr.

EDb

2-pole

2454.00

5058.00

4905.00

6180.00

6750.00

7995.00

3-pole

2823.00

5643.00

5430.00

6570.00

7710.00

9189.00

Circuit

Bkr.

EGb

2-pole 3-pole

EDb

HD

JD

JD

LA

EGb

HG

JG

JG

LH

600 Ac 3549.00

3933.00

— — — —

800 Ac 5325.00

5850.00

— — — — a HL and JL frame circuit breakers are also available as main circuit breakers.

b Backfed Main Circuit Breaker—54 circuit only.

c Copper Bus Only. d For N2 protocol, add $3819. e Contact your nearest Square D/Schneider Electric sales office for MICROLOGIC™ trip main circuit breakers

Table 5.59: Branch Circuit Breaker – Price Per Circuit Breaker

3150.00

3624.00

6486.00

6072.00

7605.00

8985.00

7464.00

6597.00

8100.00

9270.00

11568.00

13296.00

—

—

—

—

Circuit

Bkr.

HJ

—

HJ

JJ

JJ

LC

LC

—

Extra HIC

2-pole 3-pole

4872.00

5397.00

—

6105.00

—

6630.00

9930.00

10995.00

10785.00

12675.00

12759.00

14664.00

14331.00

16326.00

— —

Circuit

Bkr.

FI

—

—

KI

KI

LI

LI

—

I-Limiter™

2-pole 3-pole

6375.00

7326.00

—

—

—

—

10899.00

12528.00

13731.00

15783.00

14025.00

16119.00

20460.00

23517.00

— —

Powerlink G3—ECB Bolt-On

65 kA AIR@240 Vac,

14 kA AIR@480 Y/277

Standard Breakers—EDB Bolt-On

18 kA AIR 1-pole,

25 kA AIR 2 & 3-pole @ 240 V,

18 kA AIR@480 Y/277

Standard Breakers HIC—EGB Bolt-On

65 kA AIR@240 Vac,

35 kA AIR@480 Y/277

Standard Breakers Extra HIC—EJB Bolt-On

100 kA AIR@240 Vac,

65 kA AIR@480 Y/277

Voltage

240

Vac

480Y/277

Vac

Ampere

Rating

15–20

30

15–20

30

1-pole 2-pole 3-pole

438.

438.

438.

438.

1215.

1215.

1215.

1215.

1929.

1929.

1929.

—

Voltage

480Y/

277

Vac

Ampere

Rating

15–60

70

80–100

110–125

1-pole 2-pole 3-pole Voltage

288.

513.

—

—

663.

1308.

1308.

3825.

Space Only 63.

126.

189.

Space Only 63.

Note: All EC, ED, EG and EJ branch circuit breakers are UL Listed as HACR type.

126.

1122.

1569.

1569.

4845.

189.

480Y/

277

Vac

Ampere

Rating

15–60

70

80–100

110–125

Space Only

1-pole 2-pole 3-pole Voltage

486.

1119.

1896.

867.

2211.

2565.

—

—

2211.

6171.

63.

126.

2655.

7131.

189.

480Y/

277

Vac

Ampere

Rating

15–60

70

80–100

110–125

Space Only

1-pole 2-pole 3-pole

777.

1767.

3036.

1386.

3540.

4245.

—

—

3540.

7950.

63.

126.

4245.

9450.

189.

Sub-Feed Circuit Breaker

•

Available on 1 Ø or 3 Ø , 125 – 800 A main lugs or 125 – 600 A main circuit breaker interiors

•

One sub-feed JD, JG, JJ or JL circuit breaker per 250 A panelboard

•

Two sub-feed JD, JG, JJ or JL circuit breakers per 400 A panelboardf f LC and JJ may not be combined.

Table 5.60: Sub-Feed Circuit Breaker (150

–

400 A)

No. of Poles

2

JD JG JJg JL LA LH LCg

2265.00 3165.00 3844.50 4230.00 2985.00 4150.50 6475.50

Space

619.50

3 2527.50 3825.00 4665.00 5296.50 3687.00 4882.50 7617.00

g JJ and LC sub-feed circuit breakers cannot be used together.

619.50

Table 5.61: Sub-Feed Breaker Cabinet Data

250 A

Box Height (20" W x 5.75" D)

400 A LA/LH 600 A 800 A Max. No. of

Branch Spaces (Does not include sub-feed breaker spaces) Main

Lugs

Main

Circuit

Breaker

Main

Lugs

Main

Circuit

Breaker

Main

Lugsj

30

42

56

62

68

74

68

74

80

86

68

74

54 68 80 80 92 80 h Dimensions also for 400 A LC/LI main circuit breaker panels.

i 600 A main lug panelboards require an 8" deep, 26” wide box.

j 600 A main lug panelboards require an 8.75" deep box.

k 800 A main lug panelboards require an 8.75” deep, 26” wide box.

Main

Circuit

Breaker i

80h

86h

92h

Main

Lugsk

68

74

80

5-26

•

•

•

•

•

•

•

•

•

•

•

•

To obtain pricing for the following Special Features please refer to the

Supplemental Digest.

•

PowerLogic™ metering

•

Customer equipment space

•

Increased box depth

•

Box extensions top, bottom and side

•

Drip hoods

Non-standard paint

NEMA 1 gasketed

NEMA 4 Stainless steel enclosure

NEMA 4X Fiberglass enclosure (NQOD and NF)

Stainless steel trim front (NQOD, NF and I-LINE)

Padlockable hasp

Special locks (Corbin, Yale, Best)

Equal height boxes

Common trip to cover two equal height boxes

Panelboard skirthides conduits feeding a panelboard

Panelboard wireway for terminating conduit in wireway endwall

Panelboard interiors and special fronts to fit existing boxes

PE-1

Discount

Schedule



All Rights Reserved


Powerlink™ Energy

Management (EM)

Powerlink Energy Management

(EM) Lighting Control System

Lighting Control System, Relay Panels, and Switches

Class 1210

The Powerlink Energy Management (EM) Lighting Control System incorporates the same features found in the

Powerlink G3 3000 level system, in addition to integral branch circuit and optional main metering for energy monitoring and verification of the lighting system. Integral metering is accomplished using the PowerLogic™

Branch Circuit Power Meter (BCPM), which is a highly accurate, full-featured multi-branch circuit power meter that provides unrivalled low-current monitoring.

The Powerlink G3 system reduces electrical energy consumption associated with lighting and other loads by automatically switching loads off during non-occupied periods. The Powerlink G3 system is often ideal for reducing th epeak demand by switching unnecessary lights off in response to an automated response signal or when high time-of-day energy tariffs occur.

Features

•

Integral individual and optional mains metering to provide utmost flexibility in assurng a sustainable metering and verification program

•

Monitors current, voltage, energy consumption, demand, and power factor for complete energy profiling

•

Accumulated metering information transmitted via Modbus communications interface

•

Data updates occurring within seconds to provide timely preventative maintenance information

•

Optional EGX web interface for storing and reporting data via standard web browser (suggested for applications without

Energy Management System [EMS] software)

•

Alarm indication when parameters approach user-configured thresholds

•

16 hard-wired inputs available for connection to devices with physical dry-contacts

•

64 communication inputs available for network connection

•

16 independent time schedules, each can be configured into 24 distinct periods

•

7-day repeating clock with changeable automatic daylight savings time

•

Automatic sunrise/sunset tracking with offsets

•

32 special event periods

•

32 remote sources for sharing input status, time schedules, or zone status between controllers

•

Full custom logic capabilities, including full Boolean functions and synchronization services

•

RS232 and RS485

•

Serial communications using Modbus ASCII/RTU, BACnet MS/TP and DMX512 protocols (metering Modbus only)

•

Ethernet 10BaseT communications using Modbus TCP and BACnet/IP protocols

Table 5.62:

Characteristics

Operating Temperature

Storage Temperature

-5° to 40°C (23° to 104°F) (95%RH, non-condensing)

-20° to 85°C (-4° to 185°F) (<95%RH, non-condensing)

Regulatory/Standards Compliance

• UL Listed 916, Energy Management Equip

• FCC Part 15, Class A

• NEC Class 1 and Class 2 Control Circuits

• ESD Immunity: IEC 1000, level 4

•

RF Susceptibility: IEC 1000, level 3

• Electrical Fast Transient Susceptibility: IEC 1000, level 3

• Electrical Surge Susceptibility: IEC 1000, level 4 (power line)

• Electrical Fast Transient Susceptibility: IEC 1000, level 3 (interconnection lines)

BCPM Specifications

General

Control Power

Frequency

Sampling Frequency

Update Rate

Overload Capability

Ribbon Cable Support

Operating Temperature

Storage Temperature

Accurancy

Current Monitoring

Auxiliary Inputs

Voltage Input

Power

90–277 Vac

50/60 Hz

2560 Hz

1.6 seconds per panelboard

10 kAIC

Up to 20 ft.

0° to 60°C (32°C to 122°F) (<95%RH, non-condensing)

-40° to 70°C (-40° to 158°F)

0.25 A to 100A: 3% of reading from 0.25 A to 2 A; 2% of reading from 2 A to 100 A

2% of reading from 1% to 10% of rated current; 1% of reading from 10% to 100% of rated current (0 to 0.333 Vac)

90–277 Vac; 1% of reading from 90–277 L-N (models BCPMA and BCPMB only)

4% of reading from 0.25 A to 2 A; 3% of reading 2 A to 100 Aa (models BCPMA and BCPM only)

Network Communications

Serial Modbus™ RTU

Ethernet TCP/IP a Recommended for application where EMS software monitoring is not provided.


All Rights Reserved


5-27

Relay Panels

5-28

Relay Panels Family

LPS, LPB, LPL


Schneider Electric LPS Lighting Control Relay Panels offer a practical design for meeting energy codes requirements in smaller commercial spaces. Panels are available preassembled with 8, 16, or 32 relays. They consist of relays, time scheduler, panel controller, power supply, and NEMA 1 cabinet and cover.

Schneider Electric LPS Lighting Control Relay Panels offer a practical design for meeting energy codes requirements in smaller commercial spaces. Panels are available preassembled with 8, 16, or 32 relays. They consist of relays, time scheduler, panel controller, power supply, and NEMA 1 cabinet and cover.

LPS-Standalone Relay Panel

LPS reduces energy use by automatically shutting off lights in response to a scheduled time event from its built-in time controller or in response to an external control device, such as a keypad switch, occupancy sensor, or photocell. These panels are ideal for use in smaller commercial applications, such as small strip retail and office spaces, where a centralized building management system is not practical.

Features

•

Stand-alone lighting control system meets ASHRAE90.1 and CA Title 24

•

Individual heavy duty, mechanically latching, 20A relays

•

Built-in time controller supports 8 independent zones

•

Time retained during power outages for up to 30 days; nonvolatile program memory

•

Two universal switch inputs

•

Individual relay overrides can directly control each relay

•

Easy to program interface

•

2-wire relay used for monitoring and control

•

Manual operation lever with ON/OFF indicator built-in for easy maintenance

•

Screw terminals on load and control sides

•

UL 916 listed

•

Full 365-day, 7-day repeating clock with event priorities

•

Multi-group relay assignment

•

Inegral power supply (120 / 277 / 347 Vac)

•

Standard sizes: (LPS) 8, 16, 32; (LPB/LPL) 8, 16, 32, 48, or 64

LPB Additional Features

•

Application controller with the BACnet protocol

•

Heavy duty plug-in relays and electronic cards

•

Movable protection plate between high and low voltage sections

LPL Additional Features

•

Application controller with the LonWorks protocol

Available options include:

•

Multi-voltage separator (120/277/347 VAC)

Software provides a graphic interface that is simple and intuitive, providing the following:

•

System configuration, programming, and operation: Scheduler and Data logger

LPB-Bacnet Protocol

The Schneider Electric LPB Lighting Control Relay Panel with Native BACnet Protocol offers cost effective and code compliant lighting control. Panels are pre-packaged for ease of ordering and installation. Standard configurations are available with 8, 16, 32, 48, or 64 relays.

Relays come in a heavy duty, high intensity discharge (HID) version that carries up to 20A full load and are rated for over 120,000 mechanical operations. Heavy duty relays are recommended for high inrush loads or where higher short circuit current ratings are required.

LPBs are designed to operate on a BACnet network where control intelligence is provided through a BACnet building automation system. These panels are ideal for smaller commercial or retail spaces where a low cost way to achieve automatic shut-off is required.

These simple to install and commission panels include full feature schedule control. Switch overrides and photocells are easily added for complete control.

LPL-LonWorks Protocol

The Schneider Electric LPL Lighting Control Relay Panel with LonWorks

®

Protocol offers cost effective and code compliant lighting control. The LPL is pre-packaged for ease of ordering and installation. Standard configurations are available with 8, 16, 32, or 64 relays.

Whether from a stand-alone system, a soft-wired networked panels system, or a fully programmable network system, the LPL offers engineers and facilities managers all the flexibility they need to meet their lighting control requirements. LPL software scheduling and event programming capabilities easily support all common sequences encountered in lighting control.

The LPL was developed using open LonWorks technology from the Echelon

®

Corporation. By adopting LonTalk

®

communication protocols and incorporating Neuron

®

microprocessors, the

LPL panel complies with LonMark(tm) Interoperability Guidelines and is ready to interoperate in highly functional, flexible, and open building systems.

The Schneider Electric Lighting Control Relay Switches provide manual ON/OFF operation of lighting in zones. The switches are equipped with a switch based device using reversible polarity pulse technology. The switches are fully compatible with Lighting Control Relay Panels by

Schneider Electric.



All Rights Reserved

Relay Panels

Switches


Key Switch (SERPKWS)

•

Wall mountable to any standard wall box

•

Key operated (ON—turn right; OFF—turn left)

•

Operates up to 4 relays per switch

•

6 switches per relay

•

3 Amp, 24 Vdc, Reversible polarity Impulse

Rocker Switch (SERPRWS)

•

Wall mountable to any standard wall box (1-gang requires mounting bracket

(SERPWSMB)

•

LED ON/OFF indication

•


•

6 LED switches per relay

•

Optional filler plate (SERPWSFP)

•

3 Amp, 24 Vdc, Reversible polarity Impulse

Push Button Switch (SERPWS) (Individual switch)

•

Wall mountable to any standard wall box (1-gang requires mounting bracket

SERPWSMB; 3-gang comes ready to mount)

•

Switch input from common terminal

•


•

Clear plastic labeling cap

•


•


•

Optional filler plate (SERPWSFP) may be required

•

1.5 Amp, 24 Vdc, Reversible polarity Impulse

Push Button Switch (SERPWS)

(Assembled switch)

•

Factory assembled

•

Includes mounting bracket, switch(es), cover plate

•


•

Clear plastic labeling cap

•


•


NOTE: Refer to 1290HO1101 Relay Switches handout for cover plate dimension

Relay Switches

SERPKWS, SERPWS, SERPRWS, SERPWS

Table 5.63: Relay Panels, Switches and Plates

Cat. No.

Description Price

SERP8NHS

SERP16NHS

SERP32NHS

SERP8HS

SERP16HS

SERP32HS

SERPB8HS

SERPB16HS

SERPB32HS

SERPB48HS

SERPB64HS

SERPL8HS

SERPL16HS

SERPL32HS

SERPL48HS

SERPL64HS

SERPFLC16

SERPFLC32

SERPFLC48

SERPR1

SERPR2

SERPTC411

SERPRC401

SERPBC601

SERPTC811

SERPLIC

SE SERIES RELAY PANEL 8 NON-HID RELAYS



SE SERIES RELAY PANEL 8 HID RELAYS



SE SERIES BACnet RELAY PANEL 8 HID RELAYS





SE SERIES LonWorks RELAY PANEL 8 HID RELAYS





SE SERIES FLUSH COVER FOR 16 RELAY PANELS

SE SERIES FLUSH COVER FOR 32 RELAY PANELS

SE SERIES FLUSH COVER FOR 48 AND 64 RELAY PANELS

SE SERIES 1 POLE 20A HID RELAY 120–347 V

SE SERIES 2 POLE 20A HID RELAY 208–480 V

SE SERIES RELAY PANEL TIME CLOCK CONTROLLER

MODULE

SE SERIES RELAY PANEL SEQUENCER MODULE

SE SERIES RELAY PANEL BACnet Controller

SE SERIES RELAY PANEL TIME CLOCK CONTROLLER

LonWorks MODULE

SE SERIES RELAY PANEL INPUT CONTROLLER LonWorks

MODULE

1037.42

1025.08

1051.16

730.00

645.00

SERPLOC

SERPLUSB

SERPLS

SERPPBWS

SERPKWS

SERPRWS

SERPWSMB

SERPWS1G1B

SERPWS1G2B

SERPWS1G3B

SERPWS2G4B

SERPWS2G6B

SE SERIES RELAY PANEL OUTPUT CONTROLLER LonWorks

MODULE

SE SERIES FT—10 NETWORK INTERFACE USB

SE SERIES Lon SOFTWARE

SE SERIES RELAY PANEL WALL SWITCH WITH BRACKET

SE SERIES RELAY PANEL LOW VOLTAGE KEY OPERATED

SWITCH

SE SERIES RELAY PANEL LOW VOLTAGE ROCKER WALL

SWITCH

SE SERIES RELAY PANEL WALL SWITCH MOUNTING

BRACKET

SE SERIES RELAY PANEL WALL SWITCH 1 GANG 1 BUTTON





957.00

950.00

1050.00

85.90

85.57

50.40

9.69

95.57

149.88

194.29

259.14

367.97

SERPWS3G9B SE SERIES RELAY PANEL WALL SWITCH 3 GANG 9 BUTTON

SERPWS3G12B SE SERIES RELAY PANEL WALL SWITCH 4 GANG 12 BUTTON

531.64

695.31

SERPWS5G15B SE SERIES RELAY PANEL WALL SWITCH 5 GANG 15 BUTTON 859.42

SERPWS6G18B SE SERIES RELAY PANEL WALL SWITCH 6 GANG 18 BUTTON 1003.53

SERPWSFP SE SERIES RELAY PANEL WALL SWITCH FILER PLATE

SERPWP1G1B SE SERIES RELAY PANEL WALL PLATE 1 GANG 1 BUTTON


8.07

30.00

30.00







SERPWP6G18B SE SERIES RELAY PANEL WALL GANG 6 GANG 18 BUTTON

30.00

45.00

45.00

60.00

70.00

80.00

90.00

1556.13

3334.58

6545.67

2726.58

4829.59

8385.48

4559.36

5322.60

9521.71

13078.59

16684.88

3555.23

4897.76

8785.62

11932.49

15800.60

239.00

325.00

415.00

255.95

389.00


All Rights Reserved


5-29

Cassia™

Cassia System Components

Energy Management System


The Cassia energy management system (EMS) from Schneider Electric is a revolutionary wireless in-room solution that can have a dramatic impact on all key aspects contributing to your bottom line, from delighting your guests and reducing your carbon footprint, to enjoying a rapid return on investment and helping to maximize energy savings.

Thermostat

The Cassia thermostat controls heating and cooling equipment in guest rooms. Each thermostat uses two independent Zigbee radios for the local Room Area Network (RAN) within the room and the Hotel Area

Network (HAN).

Motion Sensor (PIR)

The Cassia wireless motion sensor uses a Passive Infrared (PIR) sensor to detect heat patterns in the room.

Motion will be signaled to the thermostat if the heat pattern changes.

Door Sensor

The Cassia wireless door sensor consists of a base and magnet. It sends a signal to the RAN indicating when the door is opened or closed.


The Cassia Lighting Control System, including switches (1000 W), dimmers (800 W), and plug modules

(Leading Edge Dimmer and Relay types), uses ZigBee wireless technology that provides dimming and/or on/off functions.

Wall switches and dimmers are available in black, white, cream or light almond, with one and three button options.

Plug Modules

Leading Edge Dimmer and Relay Plug Modules are designed to work as part of a Cassia EMS network installation and can be controlled by other devices on a Cassia EMS network. The modules may be placed into any standard 120 V wall outlet.

Plug modules are available in white.

Group Coordinator (GC)

The Cassia EMS Group Coordinator is a Zigbee

®

wireless gateway that can support up to 75 thermostats and provides communication between a Room Area Network (RAN) Hotel Area Network (HAN) as well as a

Property Management System (PMS).

Server

The EMS Server receives temperature, door events, motion events, and other data from the rooms. Data flows across the Ethernet network between the Thermostats, Group Coordinators and the EMS server.

Contact your Schneider Electric representative for more information about the Cassia Energy

Management System.

5-30



All Rights Reserved

No results