Vulcan V-70 [05000161] [11/2011]

Vulcan V-70 [05000161] [11/2011]
OWNER'S MANUAL
V-70
PARTS
NOTE: MANUAL including SPECIFICATIONS, subject to change without notice.
All ratings specified are based on structural factors only,
not vehicle capacities or capabilities.
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Phone (423) 238-4171 • FAX (423) 238-5371
FORM NO. 05000161
11 / 2011
PRICE $25.00
LIMITED WARRANTY
MILLER INDUSTRIES TOWING EQUIPMENT INC., hereinafter referred to as MILLER, warrants to the original
purchaser that each new MILLER wrecker or other MILLER products will be free from defects in material and
workmanship for a period of twelve (12) months from date placed in service, but in no event shall such warranty
period exceed twenty-four (24) months from date of manufacture by MILLER. The purchaser must promptly
notify MILLER in writing of any failure in material or workmanship. In no event shall MILLER accept such
notification later than twenty-four (24) months from date of delivery or twelve (12) months from date placed in
service, whichever is earlier.
MILLER's obligation under this warranty, statutory or otherwise, is limited to the repair or replacement at the
MILLER factory, or at a point designated by MILLER, of such part or parts as shall appear upon inspection
by MILLER to be defective in material or workmanship. New or remanufactured parts will be used for any
replacement at MILLER's option. This warranty is not transferable. This warranty does not obligate MILLER
to bear the cost of labor or transportation charges in connection with the repair or replacement of any parts
found to be defective, nor shall it apply to a product upon which repairs or alterations have been made unless
authorized by MILLER.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, MILLER MAKES NO OTHER WARRANTY,
EXPRESS OR IMPLIED, AND HEREBY DISCLAIMS ALL OTHER WARRANTIES INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. MILLER shall in no event be liable for claimed downtime, claimed loss of profits or goodwill, or
any other special, incidental, indirect, or consequential damages concerning or relating to any product or parts,
whether based on negligence, strict liability, breach of contract, breach of warranty, misrepresentation or any
other legal theory, regardless of whether the loss resulted from any general or particular requirement which
MILLER knew or had reason to know about at the time of sale.
MILLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE FINISHED PRODUCTS
MANUFACTURED OR SUPPLIED BY ANOTHER MANUFACTURER AND SUPPLIED BY MILLER TO
PURCHASER, including, but not limited to, any vehicle to which a MILLER product may be affixed or any accessories
or wire rope, and MILLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE AS TO SUCH EQUIPMENT OR PRODUCTS. This language
shall in no way affect or diminish the rights of the purchaser to rely on such warranties as are extended by
such manufacturers or suppliers. MILLER shall, to the extent permitted under applicable law, pass on to the
purchaser such manufacturer's or seller's warranty.
MILLER, whose policy is one of continuous improvement, reserves the right to improve its products through
changes in design or materials as it may deem desirable without being obligated to incorporate such changes
in products previously sold. This warranty is not intended to cover or include the following items, which are set
forth by way of example and not limitation:
A.Normal deterioration of trim, paint, lettering, and appearance items due to wear or exposure to weather,
road conditions, road treatments, etc.
B.Any damage or defect due to accident, misuse, abuse, improper or unauthorized repairs, failure to provide
reasonable and necessary maintenance, or uses for which the equipment was not designed or intended.
C.Alterations or modifications that affect performance, operation or reliability.
D.Normal maintenance parts including, but not limited to, wear pads, bushings, wire rope, mud flaps,
fenderettes, light bulbs, hydraulic oil, filters, and tow sling belts.
IT IS EXPRESSLY UNDERSTOOD THAT MILLER MAKES NO IMPLIED WARRANTY THAT MILLER
PRODUCTS SHALL BE FIT FOR THE PURPOSE OF LIFTING OR MOVING PEOPLE OR FOR ANY OTHER
IMPROPER USE.
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Telephone (423) 238-4171
SERIAL NUMBER
OWNER, USER AND OPERATOR:
We appreciate your choice of our towing and recovery unit for your application. Our number one priority is
user safety which is best achieved by our joint efforts. We feel that you can make a major contribution to
safety if you, as the equipment owner and operator:
1.Comply with Federal, State, and Local Regulations.
2.Read, Understand, and Follow the Instructions in this Manual.
3.Use Good, Safe Work Practices in a Common Sense Way.
4.Only have Authorized and Trained Personnel performing maintenance on the Towing and Recovery
Unit.
© 2011 MILLER INDUSTRIES TOWING EQUIPMENT INC. All rights reserved. Reproduction or use, without express permission, of editorial or
pictorial content, in any manner, is prohibited.
i
TABLE OF CONTENTS
It is assumed by the manufacturer that the Owner/Operator has a thorough knowledge of the accepted and lawful
retrieval and towing methods as dictated by his city, county or state. The manufacturer rejects any liability claim that
may result from the incorrect or unlawful application of its equipment.
Section I - PARTS
SUBFRAME ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-2 & I-3
LH BODY ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-4 & I-5
RH BODY ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-6 & I-7
OUTER BOOM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-8 & I-9
INNER BOOM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-10 & I-11
WINCH ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-12 & I-13
UNDERLIFT ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-14 & I-15
CROSSBAR ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-16 & I-17
BOOM LIFT HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-18 & I-19
BOOM EXTEND HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-20 & I-21
WINCH HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-22 & I-23
UNDERLIFT EXTEND HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-24 & I-25
UNDERLIFT TILT HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-26 & I-27
SUBFRAME HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-28 & I-29
HYDRAULIC TANK ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-30 & I-31
ii
TABLE OF CONTENTS (cont'd)
Section I - PARTS (cont'd)
STANDARD JACKLEG ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-32 & I-33
JACKLEG ASSEMBLY W/ FLIPPER FEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-34 & I-35
REAR OUTRIGGER OPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-36 & I-37
JACKLEG HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-38 & I-39
OUTRIGGER HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-40 & I-41
DUAL CONTROL ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-42 & I-43
LIFT ADAPTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-44 & I-45
5X5 BUS LIFT ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-46 & I-47
EURO BUS LIFT ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-48 & I-49
PINTLE HOOK ADAPTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-50 & I-49
5TH WHEEL ADAPTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-52 & I-53
KING PIN ADAPTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-54 & I-55
AIR SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-56 & I-57
Section II - PARTS LIST
PARTS LIST V-70 W/ STD STINGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-1 thru II-12
iii
NOTES
Section I - PARTS
This Section is provided by the manufacturer for the purpose of ordering any component part of the Vulcan V-100
that may be required when part replacement is necessary. Be certain to use only original equipment replacement
parts for warranty purposes as well as for keeping your unit in its original state and optimum operating capacities.
When ordering replacement or spare parts be sure to provide the following information to the manufacturer's Parts
Department.
1.
Manual Number & Date of Publication
2.
Manual Page Number
3.
Page Title
4.
Reference Number of Part Desired
5.
Part Number
6.
Part Description
7.
Quantity of Part Desired
Providing this information will help ensure that the correct parts will be delivered to you in an expedient manner
without delay. Should additional information be required for repair or replacement of certain components, contact
your Wrecker Manufacturer Authorized Representative.
The Manufacturer reserves the right, without notice or obligation, to improve or modify their products, which may
change the specifications, models and feature availability.
I-1
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY
I-2
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
PART NUMBER
0301895
0400066
0400114
0400126
0400128
0400306
0400392
0400437
0400452
0400480
0400482
0400491
0400492
0400508
0400776
0719585
0724349
0724476
0724499
0807731
9041202
9041402
9043950
9053041
9054150
915780000
930202500
930202504
930202505
930400009
9402970
945351500
946210500
946400600
946402501
946402600
946402700
GA0215
DESCRIPTION
GREASE FITTING, 1/8 NPT STRAIGHT
1/4-20 X 3/4 HHCS GR5 ZP
5/16-18 X 3 HHCS GR5 ZP
3/8-16 X 1 HHCS GR5 ZP
3/8-16X1.25 FLAT HD SOC
7/8-9 X 3 HHCS GR. 8 GOLD
3/8-16 NYLOCK HEX NUT ZP
7/8-9 NYLOCK HEX NUT GR8 ZP
1/4 HELICAL LOCK WASHER ZP
3/8 FLAT WASHER ZP
3/8 HELICAL LOCK WASHER ZP
1/2 HELICAL LOCK WASHER ZP
1/2 FLAT WASHER ZP
5/8 HELICAL LOCK WASHER ZP
5/16-18 HEX NUT JAM NYLOK
"D" RING - TOWING
PLATE - SPADE COVER
NYLATRON PAD
PIN, UPPER JACK LEG CYLINDER
SUBFRAME WELDMENT 3/8-16 X 5/8 PL GR8
1/2-13NC X 1 1/4 HHCS, ZP,GR.8
5/8-11X1-1/2
BEARING, SPHERICAL TORRIN
SNAP RING, 1-1/4" NOM INTERNAL
HYDRAULIC TANK ASSY
PIVOT BLOCK WELDMENT
TIE PLATE
WASHER PLATE
PLATE- BOTTOM
TOOLBOX MTG. PAD
PIN WELDMENT - LOWER LIFT CYL
FRONT MTG. TUBE WELDMENT
CHANNEL WELDMENT
TOP PANEL ~ D.C.V. COVER ASSY
REAR PANEL WELDMENT
FRONT PANEL WELDMENT
PIN, D RING
I-3
QTY
4
8
4
12
24
10
8
10
8
20
6
3
3
2
4
4
2
4
2
1
6
5
2
2
4
1
2
2
4
1
9
2
1
2
1
1
1
4
Section I - PARTS (cont'd)
LH BODY ASSEMBLY
I-4
Section I - PARTS (cont'd)
LH BODY ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
PART NUMBER
0300117
0301696
0302201
0302205
0302577
0303128
0303365
0306684
0306685
0307215
0307216
0307220
0307538
0311016
0400021
0400070
0400451
0402020
0402043
0402110
0402111
0402120
0402121
0402122
0909085
9010520
9024041
9025049
920400005
942480003
942480200
942480300
942487300
94320052
HA0131
HA0132
DESCRIPTION
GROMMET RUBBER
ELBOW, 6MJ-6FJX90
BACKUP LIGHT W/ GROMMET & PLUG
GAUGE, FLUSH MOUNT 6000 PSI
CONNECTOR, 6MJ-4FP
GROMMET, TAIL LIGHT
BRKT- MOUNTING
LIGHT, BACKUP
GROMMET, LED LIGHT 45 STT
LED LIGHT, RED 45 STT
LED LIGHT, AMBER 45 REAR TURN
LIGHT OVAL AMBER 60 LED
LIGHT, MRKR-RED LED 4.5 X 1.63
2010 VULCAN AL. BODY 180CB
#8-32 X .5 FLAT HEAD PHILLIPS S.S.
1/4-20 X 1 HHCS GR5 ZP
1/4 FLAT WASHER ZP
1/4-20 X 3/4 HHCS SS
3/8-16 X 1-1/4 HHCS SS
1/4 FLATWASHER 316 STAINLESS
1/4 LOCKWASHER 316 STAINLESS
3/8 FLATWASHER 316 SS
3/8 LOCKWASHER 316 STAINLESS
HEX NUT 316 STAINLESS
KIT,AIR FLR/REG/LUBE COMBO 1/4
FITTING - ELBOW,1/4T-1/4NPT MALE
MCGILL SWITCH
INT. COMPARTMENT LIGHT W/ SWITCH
MUD FLAP BRACE PLATE
D.C.V. UPPER PANEL
D.C.V. LOWER PANEL WELDMENT
LH MTG ANGLE WELDMENT
RH MTG ANGLE WELDMENT
MUDFLAP
AIR FILTER / REGULATOR COMBO
GAUGE- AIRFILTER/REGULATOR
I-5
QTY
2
2
1
2
2
3
1
1
4
2
1
3
2
1
4
3
3
8
4
8
8
8
4
4
1
2
4
2
1
1
1
1
1
1
1
1
Section I - PARTS (cont'd)
RH BODY ASSEMBLY
I-6
Section I - PARTS (cont'd)
RH BODY ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
PART NUMBER
0300117
0301696
0302201
0302205
0302577
0303128
0306684
0306685
0307215
0307216
0307220
0307538
0311017
0400070
0400451
0402020
0402043
0402110
0402111
0402120
0402121
0402122
9024041
9025049
920400005
942480003
942480200
942480300
942487300
94320052
DESCRIPTION
GROMMET RUBBER
ELBOW, 6MJ-6FJX90
BACKUP LIGHT W/ GROMMET & PLUG
GAUGE, FLUSH MOUNT 6000 PSI
CONNECTOR, 6MJ-4FP
GROMMET, TAIL LIGHT
LIGHT, BACKUP
GROMMET, LED LIGHT 45 STT
LED LIGHT, RED 45 STT
LED LIGHT, AMBER 45 REAR TURN
LIGHT OVAL AMBER 60 LED
LIGHT, MRKR-RED LED 4.5 X 1.63
2010 VULCAN AL. BODY 180CB
1/4-20 X 1 HHCS GR5 ZP
1/4 FLAT WASHER ZP
1/4-20 X 3/4 HHCS SS
3/8-16 X 1-1/4 HHCS SS
1/4 FLATWASHER 316 STAINLESS
1/4 LOCKWASHER 316 STAINLESS
3/8 FLATWASHER 316 SS
3/8 LOCKWASHER 316 STAINLESS
HEX NUT 316 STAINLESS
MCGILL SWITCH
INT. COMPARTMENT LIGHT W/ SWITCH
MUD FLAP BRACE PLATE
D.C.V. UPPER PANEL
D.C.V. LOWER PANEL WELDMENT
LH MTG ANGLE WELDMENT
RH MTG ANGLE WELDMENT
MUDFLAP
I-7
QTY
2
2
1
2
2
3
1
4
2
1
3
2
1
3
3
8
4
8
8
8
4
4
4
2
1
1
1
1
1
1
Section I - PARTS (cont'd)
OUTER BOOM ASSEMBLY
I-8
Section I - PARTS (cont'd)
OUTER BOOM ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
PART NUMBER
0301895
0400066
0400424
0400426
0400452
0400491
0400492
0715517
0719585
0810007
9018255
9041402
9041403
9043605
9043975
9048800
9056137
9056150
920255003
930100002
930290002
930350002
9400004
945020001
945030007
945040001
945350001
945350500
945351500
945700000
DESCRIPTION
GREASE FITTING, 1/8 NPT STRAIGHT
1/4-20 X 3/4 HHCS GR5 ZP
5/8-18 HEX NUT ZP
5/8-11 NYLOCK NUT GR8 ZP
1/4 HELICAL LOCK WASHER ZP
1/2 HELICAL LOCK WASHER ZP
1/2 FLAT WASHER ZP
PIN - "D" RING OUTER BOOM WELDMENT
"D" RING - TOWING
MAIN BOOM WELD'T
1/2 TUBE CLAMP FM2127-PP
1/2-13NC X 1 1/4 HHCS ZP GR8
1/2-13 x 1-1/2 HHCS GR8 ZP
SCREW, 5/8"-11 X 4-1/2" SKT HD CAP
5/8-11 x 3-1/2 UNC HHCS GR 8
5/8 WELDLESS CHAIN LINK
SNAP RING, 2-1/4"
RETAINING RING, 1-1/2"
SPACER - LOCK PIN WELDMENT
LOWER WEAR PAD - RECOVERY
COVER PLATE
PIN MAIN BOOM EXT CYL FRONT
BRONZE BUSHING
WASHER PLATE, LOWER LIFT CYLINDER
SPRING - HOSE TENSIONER
MAIN BOOM PIVOT
PIVOT PIN, MAIN BOOM TO SUBFRAME
PIN WELDMENT-TILT CLY UPPER
PIN WELDMENT - LOWER LIFT CYL
BOOM LIFT CYLINDER
I-9
QTY
1
8
2
2
8
3
3
1
1
1
12
2
1
2
2
2
2
2
1
1
2
1
2
2
2
2
1
1
2
2
Section I - PARTS (cont'd)
INNER BOOM ASSEMBLY
I-10
Section I - PARTS (cont'd)
INNER BOOM ASSEMBLY
ITEM
PART NUMBER
3012-793001
0300113
0300311
0301895
0400059
0400126
0400132
0400133
0400140
0400392
0400452
0400482
0400557
0700511
0700563
0802027
0806861
0806862
9012549
9012552
9012584
9044434
9056150
915040501
930105000
930350003
930720000
945030001
945030004
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
DESCRIPTION
PLATE - LUBE MTG
GREASE FITTING, 1/4-28 STRAIGHT
SHEAVE - 12-10-1BB 10
GREASE FITTING, 1/8 NPT STRAIGHT
1/4-20 x 5/8 HHCS GR5 ZP
3/8-16 X 1 HHCS GR5 ZP
3/8-16 X 1 1/2 HHCS GR5 ZP
3/8-16 X 3 HHCS GR5 ZP
3/8-16 X 4 HHCS GR5 ZP
3/8-16 NYLOCK HEX NUT ZP
1/4 HELICAL LOCKWASHER ZP
3/8 HELICAL LOCKWASHER ZP
1/2 X 1 1/4 ROLL PIN ZP
GUIDE - BOTTOM CABLE
SHAFT - SHEAVE
CABLE GUIDE WELDMENT
INNER BOOM WELDMENT
BOOM END SWIVEL WELDMENT
CONNECTOR, 3/8 TUBE X 1/8 NPT
BULKHEAD COUPLING, 1/8 ELBOW, 1/4 NPT X 3/8 TUBE 90
3/8-16X1 NC FLAT
RETAINING RING, 1-1/2"
BOTTOM CLAMP ANGLE - EXT CYL. ASSY
SPIDER CLAMP - TOP WELDMENT
PIN - MAIN BOOM EXT CYL REAR
CYLINDER - BOOM LIFT
PAD RETAINING PLATE - UPPER
UPPER WEAR PAD - RECOVERY
I-11
QTY
1
2
2
4
2
2
2
4
2
8
2
2
6
4
2
2
1
2
1
1
1
2
2
2
1
1
1
1
1
Section I - PARTS (cont'd)
STANDARD STINGER ASSEMBLY
I-12
Section I - PARTS (cont'd)
STANDARD STINGER ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
PART NUMBER
0300113
0301895
0400134
0400151
0400176
0400177
0400345
0400421
0400482
0400491
0400492
0400505
0400508
0400594
0723463
0723476
0724348
0807763
0807765
0810009
9040602
9044170
9044471
9046315
9054150
924902000
930150001
930150002
930150003
930150004
930150011
930152000
930770500
930901500
945300000
945351000
DESCRIPTION
GREASE FITTING, 1/4-28 STRAIGHT
GREASE FITTING, 1/8 NPT STRAIGHT
3/8-24 X 3/4 FLATHEAD SOCKET SCREW
3/8-24 X 3/4 HHCS GR5 ZP
1/2-13 X 1 HHCS GR5 ZP
1/2-13 X 1 1/4 HHCS GR5 ZP
SCREW - 1/4"-20 X 5/8" FL SKT HD
5/8-11 NYLOCK HEX NUT ZP
3/8 HELICAL LOCKWASHER ZP
1/2 HELICAL LOCKWASHER ZP
1/2 FLAT WASHER ZP
5/8 FLAT WASHER SAE
5/8 HELICAL LOCK WASHER ZP
SCREW - 1/4"-20 X 5/8" FL SKT HD
PLATE, PAD CAGE - 1ST STAGE STINGER
PLATE, PAD CAGE - FOLDING BOOM
PIN, PIN WELD'T - STINGER EXT. - REAR
1ST STAGE STINGER WELDMENT
FOLDING BOOM WELDMENT - 116" REACH
2ND STAGE STINGER WELDMENT
5/8-11 X 1-1/4 HHCS GR8 ZP
1-8X1-1/2 SOC SET SCREW
SCREW, 5/8"-18 X 1-1/4" HEX HD CAP
ROLL PIN, 3/16" X 1"
SNAP RING, 1-1/4" NOM INTERNAL
LOWER PIN WELDMENT TILT CYLINDER
STOP PAD (FOLDING BOOM)
SPACER (1ST STAGE STINGER)
TOP PAD
BOTTOM PAD
PIN CYLINDER 1ST STAGE STINGER
FRONT MTG. PIN WELDMENT STINGER
STINGER EXT. CYLINDER
SHAFT WELDMENT FOLDING BOOM PIVOT
PIVOT FOOT WELDMENT
SHAFT WELDMENT FOLDING BOOM PIVOT
I-13
QTY
6
2
4
6
1
1
4
1
6
2
2
2
6
8
1
1
1
1
1
1
1
1
4
2
1
1
4
1
4
4
1
1
1
1
1
1
Section I - PARTS (cont'd)
CROSSBAR ASSEMBLY
I-14
Section I - PARTS (cont'd)
CROSSBAR ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
PART NUMBER
0301895
9043800
9044170
915150004
915150005
945510006
945510007
946350005
946570500
946571000
946571100
DESCRIPTION
GREASE FITTING, 1/8 NPT STRAIGHT
1/2-13 X 1 FLAT HEAD SOCKET CAP SCR
1-8X1-1/2 SOC SET SCREW
LUG PLATE CROSSBAR ASSEMBLY
THURST WASHER (.25 THK) BEARING - ALUMINUM BRONZE
THURST WASHER (.19 THK) PIVOT PIN
5" CROSSBAR WELDMENT
TOP COVER PLATE WELDMENT
BOTTOM COVER PLATE WELDMENT
I-15
QTY
3
6
1
1
1
2
1
1
1
1
1
Section I - PARTS (cont'd)
WINCH ASSEMBLY
I-16
Section I - PARTS (cont'd)
WINCH ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
PART NUMBER
0307061
0400262
0400426
0400427
0400503
0400508
0810011
9044409
DESCRIPTION
WINCH DP35
5/8-11 X 2 1/2 HHCS GR8 ZP
5/8-11 NYLOCK NUT GR8 ZP
5/8-11 HEX JAM NUT ZP
5/8 FLAT WASHER GR8
5/8 HELICAL LOCK WASHER ZP
WINCH MTG BRACKET
5/8-11 X 2-1/4 HHCS GR8 ZP
I-17
QTY
2
32
32
16
64
16
8
16
Section I - PARTS (cont'd)
BOOM LIFT HYDRAULICS
I-18
Section I - PARTS (cont'd)
BOOM LIFT HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
PART NUMBER
0301376
0301522
0301620
0302275
0302276
0306700
0310840
0310841
9016021
9016022
915770002
945700000
946770001
DESCRIPTION
CONNECTOR 8MJX10MB
CONNECTOR 6MJ-6MB
FITTING, ELBOW, 6MJ-6MB90
CONNECTOR 8MJX6MB
ELBOW, 8MJ-6MB90
MANIFOLD BLOCK
HYD TUBE ASSY BOOM LIFT -"A" PORT
HYD TUBE ASSY BOOM LIFT (PORT B)
VALVE 6 SPOOL
VALVE 2 SPOOL
HOSE ASSEMBLY, 12" LG BOOM LIFT CYLINDER
HOSE ASSEMBLY MAIN LIFT CYLINDER
I-19
QTY
2
3
1
5
1
1
1
1
1
1
2
2
2
Section I - PARTS (cont'd)
BOOM EXTEND HYDRAULICS
I-20
Section I - PARTS (cont'd)
BOOM EXTEND HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
PART NUMBER
0302275
0302827
0307003
0307082
9016021
9016022
945770007
946760003
946760017
DESCRIPTION
CONNECTOR 8MJX6MB
CONNECTOR 10MJX10MB
INLINE ORIFICE
CYLINDER - BOOM EXTEND
VALVE 6 SPOOL
VALVE 2 SPOOL
8AT2(10MJ-8FJ) HCL 48
HYD TUBE ASSY. MAIN BOOM EXT.
HYD TUBE ASSY. 5/8" END SECTION
I-21
QTY
2
2
2
1
1
1
2
2
2
Section I - PARTS (cont'd)
UNDERLIFT EXTEND HYDRAULICS
I-22
Section I - PARTS (cont'd)
UNDERLIFT EXTEND HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
PART NUMBER
0300865
0301376
9012510
9016021
9016022
915760022
915760023
916720000
916760001
916770001
946760004
946760005
946760018
946760019
946770003
DESCRIPTION
ADAPTER, 8MJ-6MJ
CONNECTOR 8MJX10MB
CONNECTOR, 9/16" SAE X 3/8" TUBE
VALVE 6 SPOOL
VALVE 2 SPOOL
STINGER SUPPLY TUBE
STINGER SUPPLY TUBE
STINGER EXT. CYLINDER
HYDRAULIC TUBE ASSY
HOSE ASSEMBLY, 30" LG
HYD TUBE ASSY. STINGER EXT. A PORT
HYD TUBE ASSY. STINGER EXT. B PORT
HYD TUBE ASSY. 1/2" END SECTION
HYD TUBE ASSY
HOSE ASSEMBLY, 45" LG
I-23
QTY
4
2
2
1
1
1
1
1
2
2
1
1
2
2
2
Section I - PARTS (cont'd)
UNDERLIFT TILT HYDRAULICS
I-24
Section I - PARTS (cont'd)
UNDERLIFT TILT HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
PART NUMBER
0300865
0301376
0301522
0301696
9016021
9016022
915740000
915770008
916760001
946760006
946760007
946760018
946760019
946770003
DESCRIPTION
ADAPTER, 8MJ-6MJ
CONNECTOR 8MJX10MB
CONNECTOR 6MJ-6MB
ELBOW, 6MJ-6FJX90
VALVE 6 SPOOL
VALVE 2 SPOOL
TILT CYLINDER
6AT2(6T90S-8MJ) HCL 42
HYDRAULIC TUBE ASSY
HYD TUBE ASSY. STINGER TILT A PORT
HYD TUBE ASSY. STINGER TILT B PORT
HYD TUBE ASSY. 1/2" END SECTION
HYD TUBE ASSY
HOSE ASSEMBLY, 45" LG
I-25
QTY
4
2
2
2
1
1
1
2
2
1
1
2
2
2
Section I - PARTS (cont'd)
WINCH HYDRAULICS
I-26
Section I - PARTS (cont'd)
WINCH HYDRAULICS
ITEM
PART NUMBER
DESCRIPTION
1
0300041
CONNECTOR 8MJX8MB
2
0302827
CONNECTOR 10MJX10MB
3
0307003
INLINE ORIFICE
4
0307061
WINCH DP35 5
9016021
VALVE 6 SPOOL
6
9016022
VALVE 2 SPOOL
7
946760010
HYD TUBE ASSEMBLY
8
946760011
HYD TUBE ASSEMBLY
9
946760013
TUBE, HYD 5/8X48 3/8
10
946760014
TUBE, HYD 5/8X29 3/4
11
946760017
HYD TUBE ASSY. 5/8" END SECTION
12
946770007
HOSE ASSEMBLY, 89" LG
13
946770009
HOSE ASSEMBLY, 89" LG
14
GX263
FITTING, ELB 10MJ-10MB90
I-27
QTY
4
3
4
2
1
1
1
1
1
1
4
2
2
1
Section I - PARTS (cont'd)
SUBFRAME HYDRAULICS
I-28
Section I - PARTS (cont'd)
SUBFRAME HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
PART NUMBER
0300649
0301619
0302083
0302205
0302577
0302696
0302901
0303394
0306538
0306539
0306984
0310010
0310837
0310839
9012968
9015571
9016021
9016022
9016815
9018140
915770017
915780000
946760001
946760012
946760016
DESCRIPTION
CONNECTOR, 12MJ-12MJ
BRANCH TEE, 6MJ-6MJ-6MB
16MJ-12MB 90 ELBOW
GAUGE, FLUSH MOUNT 6000 PSI
CONNECTOR, 6MJ-4FP
CONNECTOR, 16MJ-20MP
HOSE ASSEMBLY, 120" LG
HOSE ASSEMBLY, 46" LG
HOSE BARB, 20HOSE-20MP
HOSE BARB, 20HOSE-16MB90
ELBOW, 12MJ-12MB90
SUCTION HOSE, 1-1/2" I.D. 100R4
HYD TUBE, RETURN REAR VALVE
HYD TUBE ASSY, PRESSURE
CONNECTOR 8MJX10MB
BALL VALVE 1-1/4"'
VALVE 6 SPOOL
VALVE 2 SPOOL
MUNCIE PUMP TSPKS17-17-2B
FILTER ASSEMBLY, SPIN-ON
HOSE ASSEMBLY
HYDRAULIC TANK ASSY
HYD TUBE ASSEMBLY
HYD TUBE ASSY, RETURN LINE
HYD TUBE ASSY
I-29
QTY
4
2
2
4
4
2
2
4
2
2
2
2
1
1
2
2
1
1
1
2
2
1
1
1
2
Section I - PARTS (cont'd)
HYDRAULIC TANK ASSEMBLY
I-30
Section I - PARTS (cont'd)
HYDRAULIC TANK ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
PART NUMBER
0301618
0302696
0302699
0303155
0305006
0400109
9015571
9018139
9018140
9401408
9401418
915780500
DESCRIPTION
FITTING, BRASS PLUG 1/4
CONNECTOR, 16MJ-20MP
PIPE NIPPLE - 1-1/4 X 2
PIPE PLUG - 3/4 NPT (MAGNETIC)
FILLER CAP
5/16-18 X 1 HHCS GR5 ZP
BALL VALVE 1-1/4"
SUCTION STRAINERS
FILTER ASSEMBLY, SPIN-ON
INSPECT COVER
DIPSTICK WELDMENT
HYDRAULIC TANK WELDMENT
I-31
QTY
1
2
4
1
1
6
2
2
2
1
1
1
Section I - PARTS (cont'd)
STANDARD JACKLEG ASSEMBLY
I-32
Section I - PARTS (cont'd)
STANDARD JACKLEG ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NUMBER
0301895
0400114
0400283
0400438
0400490
0400776
0719585
0807947
0807948
9054150
920900007
930350001
945550500
945557500
945720000
GA0215
DESCRIPTION
GREASE FITTING, 1/8 NPT STRAIGHT
5/16-18 X 3 HHCS GR 5 ZP
3/4-10 X 2 GR8 HHCS
3/4-10 HEX NUT ZP
3/4 FLAT WASHER GR.8
5/16-18 HEX NUT JAM NYLOK
"D" RING - TOWING
LH JACK LEG WELDMENT - STANDARD
RH JACK LEG WELDMENT - STANDARD
SNAP RING, 1-1/4" NOM INTERNAL
PIN, LOWER STIFFLEG CYLINDER
PIN, UPPER STIFFLEG
LH STABILIZER WELDMENT
RH STABILIZER WELDMENT
STIFF LEG CYLINDER - 45
PIN, D RING
I-33
QTY
6
2
4
4
4
2
2
1
1
8
2
2
1
1
2
2
Section I - PARTS (cont'd)
JACKLEG ASSEMBLY W/ FLIPPER FEET
I-34
Section I - PARTS (cont'd)
JACKLEG ASSEMBLY W/ FLIPPER FEET
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART NUMBER
0300113
0301895
0310121
0400416
0400497
0400568
0400774
0719585
0807725
0807726
9054150
920900007
930230101
930230103
930232000
930232005
930233000
930239000
930350001
945720000
HD1259
DESCRIPTION
GREASE FITTING, 1/4-28 STRAIGHT
GREASE FITTING, 1/8 NPT STRAIGHT
RETAINING RING, 1-1/2"
1/2-13 NYLOCK HEX NUT GR.8, ZP
1/2 FLAT WASHER GR 8 ZP
3/8 X 3 ROLL PIN ZP
1/2-13 X 1 FLAT HEAD SOCKET CAP SCR
"D" RING - TOWING
LH JACK LEG WELDMENT
RH JACK LEG WELDMENT
SNAP RING, 1-1/4" NOM INTERNAL
PIN, LOWER STIFFLEG CYLINDER
PIN - SWIVEL PADS
PIN - D RING - INNER LEG FLIPPER TYPE
FLIPPER PAD WELDMENT -INNER LEG (LH)
BLADE FLIPPER PAD WELDMENT
PIN ASSEMBLY, LOCK FLIPPER FEET
FLIPPER PAD WELDMENT -INNER LEG (RH)
PIN, UPPER STIFFLEG
STIFF LEG CYLINDER - 45
PIN, SAFETY SNAP
I-35
QTY
4
6
8
14
14
2
14
2
1
1
8
2
4
2
1
2
2
1
2
2
2
Section I - PARTS (cont'd)
REAR OUTRIGGER OPTION
I-36
Section I - PARTS (cont'd)
REAR OUTRIGGER OPTION
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
PART NUMBER
0300109
0300113
0301895
0310145
0400066
0400114
0400382
0400452
0719540
0719585
0724617
0724635
0810030
0810033
0810035
0810047
0906963
0911122
0911123
0911124
0911167
9054150
920900007
930350001
945720000
GA0215
DESCRIPTION
RETAINING RING, 1-1/2"
GREASE FITTING, 1/4-28 STRAIGHT
GREASE FITTING, 1/8 NPT STRAIGHT
CYLINDER ASSEMBLY
1/4-20 X 3/4 HHCS GR.5,ZP
5/16-18 X 3 HHCS GR 5 ZP
5/16-18 NYLOCK HEX NUT ZP
1/4 HELICAL LOCK WASHER ZP
PIN - EXTEND CYLINDER (BASE END)
"D" RING - TOWING
PLATE - OUTRIGGER COVER
PIN - EXTEND CYLINDER
LH REAR OUTER OUTRIGGER
REAR INNER OUTRIGGER WELD'T
REAR OUTRIGGER PAD WELDMT
RH REAR OUTER OUTRIGGER
PIN REAR OUTRIGGER PAD ASSY
RETAINER PIN ASSEMBLY
RETAINER PIN ASSEMBLY
RETAINER PIN ASSEMBLY
SPADE WELDMENT - REAR OUTRIGGER
SNAP RING, 1-1/4" NOM INTERNAL
PIN, LOWER STIFFLEG CYLINDER
PIN, UPPER STIFFLEG
STIFF LEG CYLINDER - 45
PIN, D RING
I-37
QTY
4
2
6
2
16
2
2
16
2
2
2
2
1
2
2
1
2
2
2
2
2
12
2
2
2
2
Section I - PARTS (cont'd)
JACKLEG HYDRAULICS
I-38
Section I - PARTS (cont'd)
JACKLEG HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
PART NUMBER
0300052
0301376
0301522
9015738
9016021
9016022
930760010
930760011
945720000
945770003
946760008
946760009
DESCRIPTION
ELBOW, 8MJ-10MB90
CONNECTOR 8MJX10MB
CONNECTOR 6MJ-6MB
HOLDING VALVE
VALVE 6 SPOOL
VALVE 2 SPOOL
HYDRAULIC TUBE ASSEMBLY
HYDRAULIC TUBE ASSEMBLY
STIFF LEG CYLINDER
HOSE ASSEMBLY - STIFFLEG CYLINDER HYDRAULIC TUBE ASSEMBLY
HYDRAULIC TUBE ASSEMBLY
I-39
QTY
1
3
4
2
1
1
1
1
2
4
1
1
Section I - PARTS (cont'd)
OUTRIGGER HYDRAULICS
I-40
Section I - PARTS (cont'd)
OUTRIGGER HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
PART NUMBER
0300052
0301376
0301470
0301522
0301620
0301998
0303017
0303170
0303185
0307525
0310145
0310881
9012594
9015738
9016021
9016022
930760010
930760011
945720000
945770003
946760008
946760009
DESCRIPTION
ELBOW, 8MJ-10MB90
CONNECTOR 8MJX10MB
FITTING - HYDRAULIC ELBOW 6MJ-8MB90
CONNECTOR 6MJ-6MB
FITTING, ELBOW, 6MJ-6MB90
HOSE HYD, 24” LG
CONNECTOR 8MBX6FB
HOSE ASSY - 75” LG.
HOSE ASSY - 66” LG.
HOSE ASSY - 120” LG
CYLINDER ASSEMBLY
6 WAY DIVERTER VALVE
FITTING, HYD RUN TEE, 6MJ-6MB-6MJ
HOLDING VALVE
VALVE 6 SPOOL
VALVE 2 SPOOL
HYDRAULIC TUBE ASSEMBLY
HYDRAULIC TUBE ASSEMBLY
STIFF LEG CYLINDER
HOSE ASSEMBLY - STIFFLEG CYLINDER HYDRAULIC TUBE ASSEMBLY
HYDRAULIC TUBE ASSEMBLY
I-41
QTY
1
3
5
12
4
4
5
1
1
4
2
2
1
2
1
1
1
1
2
4
1
1
Section I - PARTS (cont'd)
DUAL CONTROL ASSEMBLY
I-42
Section I - PARTS (cont'd)
DUAL CONTROL ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
PART NUMBER
0300341
0302726
0400126
0400382
0400387
0400392
0400393
0400463
0400480
0402043
0402120
0402121
0402122
0723377
0810080
0907441
0907442
9016021
9016022
9041108
9041212
9043371
9043713
9048513
930400001
930400009
930400012
930400013
930402600
942480300
942487300
946400600
DESCRIPTION
KNOB, BLACK (BLANK)
GREASE FITTING, 1/4"-28 X 45°
3/8-16 X 1 HHCS GR.5,ZP
5/16-18 NYLOCK HEX NUT ZP
3/8-24 HEX JAM NUT ZP
3/8-16 NYLOCK HEX NUT ZP
3/8"-16 HEX JAM NUT
5/16 FLAT WASHER ZP
3/8 FLAT WASHER ZP
3/8-16 X 1-1/4 HHCS SS
3/8 FLATWASHER 316 SS
3/8 LOCKWASHER 316 STAINLESS
HEX NUT 316 STAINLESS
D.C.V. MTG. PLATE
NV-50 SUBFRAME
CONTROL HANDLE ASSY
CONTROL HANDLE ASSY
VALVE 6 SPOOL
VALVE 2 SPOOL
5/16-18 X 1-3/4 HHCS GR 8 ZP
3/8-16 X 2-3/4 LG. HHCS GR.8
3/8-16 NYLOCK HEX NUT ZP
M8 X 20 SOCKET SHOULDER BOLT
SPHERICAL ROD END
PIVOT PIN
PLATE- BOTTOM
RH CONTROL ROD (SHORT)
LH CONTROL ROD (SHORT)
SHORT LUG WELDMENT
LH MTG ANGLE WELDMENT
RH MTG ANGLE WELDMENT
CHANNEL WELDMENT
I-43
QTY
16
16
11
4
16
17
16
12
22
8
16
8
8
1
1
8
8
1
1
4
6
8
8
16
2
1
8
8
8
2
2
2
Section I - PARTS (cont'd)
LIFT ADAPTERS
I-44
Section I - PARTS (cont'd)
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
LIFT ADAPTERS
PART NUMBER
0200018
0200019
0200020
0200021
0200023
0306564
0310230
0400886
0801186
0801187
0801459
0803591
0803592
0807023
0900900
0908672
DESCRIPTION
FORK, SHORT (3" OPENING)
FORK, SHORT (3" OPENING)
FORK, MEDIUM (3" OPENING)
FORK, MEDIUM (3" OPENING)
FORK, LONG (3" OPENING)
T HANDLE
CLEVIS PIN, 5/8 X 6 ZP
COTTER PIN, 1-1/4" HAIR PIN
CHAIN ADAPTER, RIGHT
CHAIN ADAPTER, LEFT
RISER BRACKET, HDU
LH OFFSET FORK RECIEVER
RH OFFSET FORK RECIEVER
PIVOT SPRING LIFT BRACKET, EXTRA WIDE
RETAINING PIN ASSEMBLY
RETAINING PIN, SPRING LIFT
I-45
QTY
2
2
2
2
2
4
2
2
1
1
2
1
1
2
2
2
Section I - PARTS (cont'd)
5X5 BUS LIFT ASSEMBLY
I-46
Section I - PARTS (cont'd)
5X5 BUS LIFT ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
PART NUMBER
0804491
0804492
0804495
0804496
0902947
0903089
0903480
945520100
945525000
DESCRIPTION
OUTER CROSSTUBE-WELDMENT-LH 5"
OUTER CROSSTUBE-WELDMENT-RH 5"
SUPPORT - TIRE WELDMENT-LH
SUPPORT - TIRE WELDMENT-RH
PIN- RETAINER ASSY
PIN-RETAINER ASSY
TUBE - ADJUSTMENT & DECAL
RATCHET HANDLE ASSY - BUS LIFT
BUS LIFT WHEEL STRAP ASSY (NS) I-47
QTY
1
1
1
1
2
4
2
1
1
Section I - PARTS (cont'd)
EURO BUS LIFT ASSEMBLY
I-48
Section I - PARTS (cont'd)
EURO BUS LIFT ASSEMBLY
ITEM
1
2
3
4
5
6
7
9
PART NUMBER
0804499
0804501
0804502
0805974
0902947
0903089
945520100
945525000
DESCRIPTION
TIRE SUPPORT TUBE WELDMENT
SUPPORT - TIRE WELDMENT-LH
TIRE SUPPORT PLATE ASSY (RH)
ARM WELDMENT
PIN- RETAINER ASSY
PIN-RETAINER ASSY
RATCHET HANDLE ASSY - BUS LIFT
BUS LIFT WHEEL STRAP ASSY (NS) I-49
QTY
2
1
1
2
2
2
1
1
Section I - PARTS (cont'd)
PINTLE HOOK ADAPTER
I-50
Section I - PARTS (cont'd)
PINTLE HOOK ADAPTER
ITEM
1
2
3
4
5
6
7
8
PART NUMBER
0302198
0306564
0400177
0400491
0803591
0803592
0803831
0902378
DESCRIPTION
PINTLE HOOK
T HANDLE
1/2-13 X 1 1/4 HHCS GR 5, ZP
1/2 HELICAL LOCK WASHER ZP
LH OFFSET FORK RECIEVER
RH OFFSET FORK RECIEVER
5TH WHEEL & KING PIN ADAPTER
RETAINER PIN ASSEMBLY, 3224
I-51
QTY
1
2
4
4
1
1
1
2
Section I - PARTS (cont'd)
5TH WHEEL ADAPTER
I-52
Section I - PARTS (cont'd)
5TH WHEEL ADAPTER
ITEM
1
2
3
4
5
6
7
8
9
10
PART NUMBER
0306564
0400555
0803591
0803592
0803831
0804053
0902378
HD1259
VA0661
VA0662
DESCRIPTION
T HANDLE
3/8 X 1-1/2 ROLL PIN ZP
LH OFFSET FORK RECIEVER
RH OFFSET FORK RECIEVER
5TH WHEEL & KING PIN ADAPTER
5TH WHEEL PIVOT PLATE WELDMENT
RETAINER PIN ASSEMBLY, 3224
PIN, SAFETY SNAP
PULL PIN WELDMENT
PIVOT PIN WELDMENT
I-53
QTY
2
1
1
1
1
1
2
2
1
1
Section I - PARTS (cont'd)
KING PIN ADAPTER
I-54
Section I - PARTS (cont'd)
KING PIN ADAPTER
ITEM
1
2
3
4
5
6
7
8
PART NUMBER
0306564
0803591
0803592
0803605
0803831
0902378
HD1259
VA0662
DESCRIPTION
T HANDLE
LH OFFSET FORK RECIEVER
RH OFFSET FORK RECIEVER
ADAPTER - KINGPIN WELDMENT
5TH WHEEL & KING PIN ADAPTER
RETAINER PIN ASSEMBLY, 3224
PIN, SAFETY SNAP
PIVOT PIN WELDMENT
I-55
QTY
2
1
1
1
1
2
1
1
Section I - PARTS (cont'd)
AIR SYSTEM
I-56
Section I - PARTS (cont'd)
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
AIR SYSTEM
PART NUMBER
0301577
0306983
0311365
0909085
0910536
9010520
9012537
9012575
9012623
HA0131
HA0132
9048248
DESCRIPTION
TUBING- PLASTIC 1/4 OD X 5" AIR LINE
MALE RUN TEE, 1/4T-1/4NPT MALE
BRACKET
KIT, AIR FLR/REG/LUBE COMBO 1/4
MNFLD PKG 16 VALVE 24VDC
ELBOW, 1/4T-1/4NPT MALE
ELBOW, 1/4 NPT X 3/8 TUBE 90
TEE FITTING AIR 1/4T-1/4T-1/8 MPX
ELBOW, 1/4 TUBE X 1/4 NPT 90
AIR FILTER / REGULATOR COMBO
GAUGE- AIR FILTER/REGULATOR
WINCH DP 2-SPD 25K NARROW DRUM
I-57
QTY
220 FT
1
2
1
1
3
1
3
2
1
2
2
NOTES
Section II - PARTS LIST
PARTS LIST V-70 W/STD STINGER
ITEM
PART NUMBER
125070200
0910994
0911029
0910994
0910786
0911006
0911010
0910786
0300113
0301895
0303193
0400134
0400176
0400177
0400248
0400491
0400492
0400505
0400508
0400594
0723463
0723476
0724348
0807763
0807765
0810009
9012510
9040602
9044170
9044471
9046315
9046625
9054150
915760022
915760023
916770001
924902000
930150001
930150002
930150003
930150004
930150011
930152000
930770500
930901500
945300000
945351000
946750000
DESCRIPTION
QTY
V-70, STANDARD STINGER
BUA, V-70, STD STINGER
SHIP KIT, V-70
1
1
BUA, V-70, STD STINGER
STINGER ASSY - STD - 114"
SUBFRAME ASSY - V70
RECOVERY BOOM INSTALL V-70
1
1
1
STINGER ASSY - STD - 114"
GREASE FITTING,1/4-28 STRAIGHT
GREASE FITTING,STR 1/8 PTF BLACK SKUFF JACKET SJ16 3/8-24X3/4 FLTHDSKTSCR 1/2-13X1 HHCS GR5 ZP 1/2-13X1.25 HHCS GR5 ZP 5/8-11X1HHCS GR 8 ZP 1/2" HCL LKWSHR ZP 1/2" FLATWASHER ZP 5/8" SAE WASHER 2
5/8" HELICAL LCKWSHR ZP 1/4-20X5/8 SOC FLT HD PLATE, PAD RETAINER PLATE, PAD RETAINER PIN, EXT CYL REAR MTG -STINGER
1ST STAGE STINGER WELD'T 116" FOLDING BOOM WELD'T 116" 2ND STAGE STINGER - 116" CONNECTOR 6SAE MALE-3/8 5/8NC X 1 1/4 HHCS GR 8 1-8X1-1/2 SOC SET SCREW 5/8-18 X 1 1/4 HHCS PL GR8 3/16 DIAX1 3/4LG ROLL PI 7/8X6 1/2 LG HITCH PIN 1 1/2 INT. RET. RING (C HYD.TUBE 3/8 STINGER EX HYD.TUBE 3/8 STINGER EX HOSE- HYD. 3/8 - 105" 8MJ-6MFA
LOWER PIN WELD'T STOP PAD (FOLDING BOOM) SPACER (1ST STAGE STINGE TOP PADS 4
BOTTOM PADS 4
PIN (CYL STIFFENER PLATE FRONT MTG. PIN WELD'T TWIN CYL. ARRANGEMENT WELD-ON SHAFT WELD'T - FOLD.BOOM PIVOT
PIVOT FOOT WELDMENT SHAFT WELDT-FOLDING BOOM PIVOT
TILT CYLINDER 6 DIA II-1
4
4
19
3
1
1
1
2
2
10
8
1
1
1
1
1
1
2
1
1
8
2
1
1
1
1
2
1
4
1
1
1
1
1
1
1
1
Section II - PARTS LIST (cont'd)
PARTS LIST V-70 W/STD STINGER (cont'd)
ITEM
PART NUMBER
0911006
0300649
0300865
0301522
0301577
0301620
0301895
0302275
0302276
0302726
0303193
0303394
0307003
0311189
0400066
0400109
0400114
0400126
0400128
0400149
0400176
0400205
0400306
0400393
0400437
0400452
0400463
0400482
0400491
0400492
0400508
0400776
0501420
0719585
0724349
0724499
0724500
0807731
0810005
0910705
0910757
9012515
9012525
9015738
9018241
9018254
9018255
9018256
9018271
9041011
DESCRIPTION
SUBFRAME ASSY - V70
UNION, STRAIGHT 12MJ - 12MJ FITTING, CONNECTOR 8MJ-8MJ FITTING, CONN. 6MJ-6MB 1/4 OD PLASTIC AIRLINE, BLACK FITTING, HYD. 6MJ - 6MB90 GREASE FITTING,STR 1/8 PTF FITTING, CONN 8MJ-6MB W/STEP FITTING, ELB 90 DEG GREASE FITTING, 1/4-28 X 45DEG
BLACK SKUFF JACKET SJ16 HOSE HYD, 46" FITT, HYD UNION 10MJ-10MJ HITCH PIN 1/4" DIA. 1/4-20X3/4 HHCS GR5 ZP 5/16-18X1 HHCS GR5 ZP 5/16-18X3 HHCS GR5 ZP 3/8-16X1 HHCS GR5 ZP. 3/8-16X1.25 FLAT HD SOC 3/8-16 X 5/8 HHCS GR5 ZP 1/2-13X1 HHCS GR5 ZP 1/2-13X3 HHCS GR5 ZP 7/8-9X3HHCS GR 8 GOLD 3/8-16 HEX NUT JAM ZP 7/8-9 NYLOK HEX GR 8 ZP 1/4" HELICAL LCKWASHR ZP 5/16" FLATWASHER ZP. 3/8" HELICAL LCKWSHR - ZP 1/2" HCL LKWSHR ZP 1/2" FLATWASHER ZP 5/8" HELICAL LCKWSHR ZP 5/16-18 HEX NUT JAM NYLOK ZP PLATE - SERIAL/DATA (V-70) D-RING, TOWING PLATE, JACK LEG COVER PIN - UPPER JACK LEG CYL PIN - LOWER JACK LEG CYL SUBFRAME WELD'T, V-70, V-100 PIN - FORK RETAINING CONTROL STATION ASSY HYD. TUBE KIT - VULCAN HD 1 1/16 -12 37 JIC PLUG 9/16 -18 37 JIC MALE PLUG HOLDING VALVE MHB-015-L SINGLE TUBE CLAMP-1 5/8 TUBE CLAMP SM2160-PP 1/2 TUBE CLAMP FM2127-PP 3/4 TUBE CLAMP SM3190-PP TRANSITION BLOCK 9E0001 1/4 NC X 2 1/2 HHCS PL GR8 II-2
QTY
2
4
7
222
1
6
5
1
16
75
4
6
2
6
4
2
22
12
3
14
1
18
16
18
16
8
3
10
6
2
2
1
4
2
2
2
1
2
1
1
2
4
2
2
12
12
4
1
8
Section II - PARTS LIST (cont'd)
PARTS LIST V-70 W/STD STINGER (cont'd)
ITEM
PART NUMBER
DESCRIPTION
0911006
9041402
9043950
9053041
9054150
915770002
915770017
915780000
930020001
930202500
930202504
930202505
930400009
9401418
9402970
945000001
945020001
945351500
945700000
945720000
945770003
946402500
946770001
DE1381
GA0215
SUBFRAME ASSY - V70 (cont'd)
1/2 NC X 1 1/4 HHCS PLT GR8 5/8 NC X 1 1/2 HHCS PL GR 8 BEARING-SPHERICAL TORRIN 1 1/2 INT. RET. RING (C 8AT2(8T90S-8T90S) HCL 16R4(16MJ-16FJ) HCL HYD TANK ASSY 3 POINT M SPACER PLATE STIFFLEG SU PIVOT BLOCK WELD'T TIE PLATE - BOOM PIVOT A WASHER PLATE - BOOM PIVO BOTTOM PLATE - DCV DUAL DIPSTICK WELDMENT HYDR TANK TOOLBOX MTG. PAD LOCK PLATE - SPHERICAL B WASHER PLATE-LOWER LIFT PIN WELD'T LOWER LIFT CY CYL,LIFT - 45/45 RECOVERY BOOM
STIFF LEG CYLINDER - 45/ 6AT2(6T90L-8MJ) 24 HYD COVER ASSEMBLY 1
6AT2(6T90S-6T90S) HCL 1/2 WASHER SAE 17/32 ID PIN-"D" RING 0910705
0300052
0301376
0301619
0302083
0302827
0306984
0400382
0400387
0400392
0400480
0723377
0907441
0907442
9010030
9016021
9016022
9041108
9041212
9043371
9043713
9048513
930400001
930400012
CONTROL STATION ASSY
FITTING, ELB 8MJ-10MB 90 CONNECTOR 8 MJ - 10 MB FITT, 6MJ-6MJ-6MB BRANCH TEE 16 MJ - 12 MB 90 ELBOW FITTING, CONNECTOR 10MJ-10MB FITT, HYD ELB 12MB-12MJ90 W/HO
5/16-18 NYLOK HEX NUT ZP 3/8-24 HEX JAM NUT ZP(DE1206) 3/8-16 NYLOK HEX NUT ZINC 3/8 FLATWASHER ZP PLATE, DCV MTG. - VULCAN HD CONTROL HANDLE ASSY - SHORT CONTROL HANDLE ASSY - LONG FITT, BRASS ELB 1/4T-1/8MPX VALVE 6 SPOOL 346-9206-018 VALVE 2 SPOOL 346-9202-018 5/16 NC X 1 3/4 HHCS PL GR8 3/8 NC X 2 3/4 HHCS PL GR8 6 MM LOCKNUT FOR 9043817 M8 X 20 SOC SHOULDER BOL SPERICAL ROD END REBPJH- PIN - CONTROL HANDLE PIV RH CONTROL ROD (LONG) - II-3
QTY
5
2
2
8
2
2
1
2
2
2
4
1
1
3
2
2
2
2
2
4
2
4
4
1
9
2
2
5
2
8
32
40
44
1
8
8
12
1
1
4
6
8
8
16
2
8
Section II - PARTS LIST (cont'd)
PARTS LIST V-70 W/STD STINGER (cont'd)
ITEM
PART NUMBER
0910705
930400013
930402600
930402700
946400600
GX263
DESCRIPTION
QTY
CONTROL STATION ASSY (cont'd)
LH CONTROL ROD (SHORT) - SHORT LUG WELD'T - DUAL LONG LUG WELD'T - DUAL C CHANNEL WELD'T FITTING, ELB 10MJ-10MB90 8
6
2
2
1
0907441
0806515
9053524
CONTROL HANDLE ASSY - SHORT
CONTROL HANDLE WELD'T BEARING BR. FLG.752 X .879X.75
1
2
0907442
0806531
9053524
CONTROL HANDLE ASSY - LONG
CONTROL HANDLE WELD'T BEARING BR. FLG.752 X .879X.75
1
2
0910757
0310837
0310838
0310839
0310840
0310841
0310842
930760010
930760011
946760001
946760003
946760004
946760005
946760006
946760007
946760008
946760009
946760010
946760011
946760012
946760016
946760017
946760018
HYD. TUBE KIT - VULCAN HD HYD TUBE ASSY, RETURN - REAR HYD TUBE ASSY, RH WINCH - B HYD TUBE ASSY, REAR PRESSURE HYD TUBE ASSY, BOOM LIFT - A HYD TUBE ASSY, BOOM LIFT - B HYD TUBE ASSY, RH WINCH - A TUBE, HYD 1/2 X 17 15/16 RH ST
TUBE, HYD 1/2 X 17 13/16 RH ST
TUBE, HYD 3/4 X 30 3/4 FR.VALV
TUBE, HYD 5/8 X 32 9/16 MAIN B
TUBE, HYD 1/2 X 34 7/16 ST.EXT
TUBE, HYD 1/2 X 34 7/16 ST.EXT
TUBE, HYD 1/2 X 36 1/16 ST.TIL
TUBE, HYD 1/2 X 36 1/16 ST.TIL
TUBE, HYD 1/2 LH STIFFLEG TUBE, HYD 1/2 LH STIFFLEG B PO
TUBE, HYD 5/8 X 40 11/16 FR.WI
TUBE, HYD 5/8 X 40 11/16 FR.WI
TUBE, HYD 1" RETURN LINE FR.VA
TUBE, HYD 3/4X77 1/4 END SECTI
TUBE, HYD 5/8X80 3/8 END SECTI
TUBE, HYD 1/2X77 3/8 END SECTI
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
2
6
4
915780000
0301611
0302696
0302699
0305006
9011014
9012913
9015571
9018139
9018140
9032122
HYD TANK ASSY 3 POINT M
PIPE, 1-1/4 SCH40 BLK FITTING, CONNECTOR PIPE NIPPLE - 1-1/4 X 2 FILLER CAP (GO205,FB194) 1/4NPT SOCKET STL PLUG * MAGNETIC PIPE PLUG 3/4NP BALL VALVE - 1 1/4 CV5 SUCT.STRAINER LHA SEH-2 OIL FILTER HEAD-LHA SP50NAHN- GASKET, HYD. TANK COVER 2
2
2
1
1
1
2
2
2
1
II-4
Section II - PARTS LIST (cont'd)
PARTS LIST V-70 W/STD STINGER (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
915780000
9043477
915780500
9401408
HYD TANK ASSY 3 POINT M (cont'd)
5/16-18X1 SOC HD CAP SCREW HYDRAULIC TANK WELD'T INSPECT COVER 6
1
1
946402500
0301851
9041202
9045057
946402501
946402600
946402700
COVER ASSEMBLY
TRIM-LOCK 150B2X1/8 3/8-16 X 5/8 HHCS PL GR8 0400482 3/8 BS LOCK WASHER TOP PANNEL - COVER REAR PANEL WELD'T FRONT PANEL WELD'T 5
6
6
1
1
1
0911010
0301577
0310194
0400066
0400126
0400132
0400392
0400424
0400426
0400452
0400482
0400505
0911033
9018255
9041058
9043605
9043975
9044409
9044434
9048800
930290001
9400004
945020001
945030007
945040001
945291500
945350001
945351500
945760021
946770003
946770007
946770009
RECOVERY BOOM INSTALL V-70
1/4 OD PLASTIC AIRLINE, BLACK HARNESS, WIRING 2-SPEED 1/4-20X3/4 HHCS GR5 ZP 3/8-16X1 HHCS GR5 ZP. 3/8-16X1.5 HHCS GR5 ZP 3/8-16 NYLOK HEX NUT ZINC 5/8-18 HEX NUT ZP 2
5/8-11 GR 8 NYLOK NUT YZ PLT 1/4" HELICAL LCKWASHR ZP 3/8" HELICAL LCKWSHR - ZP 5/8" SAE WASHER 2
RECOVERY BOOM ASSY V-70 1/2 TUBE CLAMP FM2127-PP 1/4 X 1 3/4 HHCS GR8 5/8-18 X 2 SOC HD CAP H.H.C.SCREW 5/8N.C.X3 1/ 5/8-11 X 2 1/4 HHCS PL GR8 3/8-16X1 NC FLAT SOCKET HD CAP
5/8 WELDLESS CHAIN LINK STOP BLOCK VERT BOOM WEL BRONZE BUSHING 2
WASHER PLATE-LOWER LIFT CABLE TIE BACK SPRING-1 SPACER, MAIN BOOM PIVOT LOWER GUIDE PAD WELD'T PIVOT PIN, MAIN BOOM PIN WELD'T LOWER LIFT CY HYD TUBE UNDER BOOM STIN HOSE ASSEMBLY - 8MJ-8MJ X 45 HOSE ASSEMBLY - 79 HOSE ASSEMBLY - 104 0911033
0300041
0301522
0301696
RECOVERY BOOM ASSY V-70
FITTING, CONNECTOR 8MJ-8MB FITTING, CONN. 6MJ-6MB FITTING, ELB 90 DEG 6MJ-6FJX90
II-5
105
1
8
4
6
12
4
8
4
1
12
2
2
2
2
2
2
2
2
2
2
2
1
2
4
4
2
2
4
2
2
Section II - PARTS LIST (cont'd)
PARTS LIST V-70 W/STD STINGER (cont'd)
ITEM
PART NUMBER
0911033
0301895
0301895
0301949
0302275
0307061
0400059
0400262
0400392
0400426
0400491
0400492
0400503
0715517
0719585
0724343
0724344
0806861
0810007
0810011
0908425
3012-793001
9010520
9010520
9012549
9012552
9012575
9012584
9041403
9054150
9056137
9056150
915040501
920110015
920255003
930100002
930105000
930250018
930290002
930350002
930350003
930720000
945030001
945030004
945350500
945770002
946770008
DESCRIPTION
RECOVERY BOOM ASSY V-70 (cont'd)
GREASE FITTING,STR 1/8 PTF GREASE FITTING,STR 1/8 PTF 3/8" OD AIRLINE,SYNFLEX HOSE FITTING, CONN 8MJ-6MB W/STEP WINCH-35K DP 2-SP N.DRUM W/TEN
1/4-20X5/8 HHCS GR5 ZP 5/8-11X2.5" HHCS GR 8 ZP 3/8-16 NYLOK HEX NUT ZINC 5/8-11 GR 8 NYLOK NUT YZ PLT 1/2" HCL LKWSHR ZP 1/2" FLATWASHER ZP 5/8" FLATWASHER GR8 YZ PLT PIN - "D"-RING OUT BOOM WELD'T
D-RING, TOWING BAR, CABLE SUPPORT CHANNEL, ROPE GUIDE INNER BOOM WELDMENT V-70 V-70 OUTER BOOM WELD'T WINCH MTG BRKT V-70 KIT - BOOM SWIVEL PLATE - LUBE MTG. FITT, BRASS ELB 1/4T-1/4MP FITT, BRASS ELB 1/4T-1/4MP CONNECTOR-MALE 3/8TUBEX1 BULKHEAD ADAPTER 1/8M-1/8F NPT
LEGRIS- 3108-56-11 1/8NP ELBOW-1/4NPT X 3/8TUBE 9 1/2 NC X 1 1/2 HHCS PL GR8 1 1/2 INT. RET. RING (C RETAINING RING - 1 3/8 RETAINING RING - 1 1/2 CLAMP PLATE ROPE CATCHER SPACER - LOCK PIN WELD'T LOWER WEAR PAD-RECOVERY SPIDER CLAMP - TOP WELD'T CABLE RETAINER OUTER BOOM COVER PLATE VERT BOOM MA PIN MAIN BOOM EXT CYL FR PIN MAIN BOOM EXT CYL RE EXTENSION CYLINDER BOOM PAD RETAINING PLATE-UPPE UPPER WEAR PAD-RECOVERY PIN WELD'T-TILT CYL UPPE 6AT2(6T90S-8MJ) HCL 48 HOSE ASSEMBLY - 116 II-6
QTY
5
5
14
2
2
2
32
2
32
1
1
64
1
1
1
1
1
1
8
1
1
2
2
1
1
3
1
1
2
2
2
2
1
1
1
1
1
2
1
1
1
1
1
1
2
2
Section II - PARTS LIST (cont'd)
PARTS LIST V-70 W/STD STINGER (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
0908425
0400557
0908424
KIT - BOOM SWIVEL 1/2X1-1/4 ROLL PIN ZP SWIVEL-BOOM ASSEMBLY 1
6
2
0908424
0300113
0300311
0400133
0400140
0400392
0700511
0700563
0802027
0806862
SWIVEL-BOOM ASSEMBLY
GREASE FITTING,1/4-28 STRAIGHT
SHEAVE, 12-10-1BB 10 3/8-16X3 HHCS GR5 ZP 3/8-16X4 HHCS GR5 ZP 3/8-16 NYLOK HEX NUT ZINC GUIDE, BOTTOM CABLE SHAFT,SHEAVE GUIDE-CABLE WELDMENT BOOM END SWIVEL WELDMENT V-70 1
1
2
1
3
2
1
1
1
0911029
0300341
0303056
0306818
0307604
0307626
0310599
0400128
0501129
0723437
0724476
0902333
0904183
0906068
0907043
0908202
0908203
0908204
0908205
0908206
0908207
0908208
0908209
0908550
9401902
SHIP KIT, V-70
KNOB, BLACK (BLANK) D GASKET- H2 ADHESIVE WIRE, ROPE 3/4X6X37 IWRC 200' KNOB, RED LONG - SK0700-07 SAFETY CHAIN ASY,1/2X14' GR100
CRC HD CORROSION INHIBIT SPRAY
3/8-16X1.25 FLAT HD SOC V-60/V-70 OWNERS MANUAL CHANNEL SUPPORT VULCAN PAD - NYLATORN - BBOM GUIDE KIT-GLAD HAND KIT-AIR TENSIONER V-70 SHIP KIT BOX-DUAL CONTR. KIT, HOLE PLUG TOOL BOX KIT, FORK - VULCAN LWRK KIT, HDU CHAIN ADPTR -VUL LWRK
KIT, HDU RISER BRKT -VUL LWRK KIT, SPRG LIFT BRKT -VUL LWRK KIT, FORK ADAPTER -VUL LWRK KIT, PUMP -VUL LWRK KIT, MOUNTING -VUL LWRK KIT, MUDFLAP -VUL LWRK KIT, SAFETY TREAD DECAL-VULCAN
TRAILER RECOVERY LOOP (EA) 12
8
2
4
2
1
12
1
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0902333
0301909
0301946
0301948
0304363
0400070
0400367
0400451
KIT-GLAD HAND
RECEPTACLE BOOT FITTING, BLKHD CONNECT HD 7 WAY TRAILER CONNECT QUICK DISCONNECT 1/2 FPT 1/4-20X1 HHCS GR5 ZP 1/4-20 NYLOK HEX NUT ZP 1/4 FLATWASHER ZP 1
2
1
2
2
2
2
II-7
Section II - PARTS LIST (cont'd)
PARTS LIST V-70 W/STD STINGER (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
0904183
0301577
0302495
0311193
0400062
0700188
0909085
HA0132
KIT-AIR TENSIONER
1/4 OD PLASTIC AIRLINE, BLACK CONVOLUTED LOOM 1/4 6" CABLE TIE 1/4-20X3/4 THRD CUT HEX BRKT,BULKHEAD KIT,AIR FLR/REG/LUBE COMBO 1/4
GAUGE 0-160 PSI 25
25
25
2
2
1
1
0909085
0302123
0303363
0306983
9010520
KIT,AIR FLR/REG/LUBE COMBO 1/4
HEX NIPPLE 4MP-4MP AIR FLTR/REGULATOR COMBO FITT, BRASS RUNTEE 1/4T-1/4MPX
FITT, BRASS ELB 1/4T-1/4MP 1
1
1
1
0906068
0906006
0906018
0906027
0906028
0906839
0907304
124002186
945990400
V-70 SHIP KIT BOX-DUAL CONTR.
V-70 DECALS H.D. LIGHTING PARTS BAG HEAVY DUTY BOLT BAG H.D. FITTINGS BAG GROUND KIT MTG.HARNESS VULCAN KIT - QUICK DISCONNECT AIR QUICK CONNECT AIR SUPPLY DUAL CONTROL COMMON DECA 1
1
1
1
1
1
1
1
0906006
0501021
0501022
0501023
0501024
0904217
0911148
V-70 DECALS
DECAL - V70 DECAL WARNING V-70 BOOM DECAL WARNING V-70 UNDERLIFT DECAL WARNING V-70 WINCH CABLE
HARDWARE-BODY MOUNTING VULCAN HD ADDTL BOLT KIT 2
2
2
2
1
1
0904217
0400286
0400301
0400431
0400436
HARDWARE-BODY MOUNTING
3/4-10X2.75" HHCSGR 8GOLD 7/8-9X3HHCS GR5 ZP 3/4-10 NYLOK HEX GR 8 ZP 7/8-9 NYLOK HEX NUT ZP 44
4
44
4
0911148
0400431
0400490
9044454
VULCAN HD ADDTL BOLT KIT
3/4-10 NYLOK HEX GR 8 ZP 3/4 FLATWASHER GR 8 3/4-10NC X 7 LG HHCS GRD 2
4
2
0906018
0303226
9032096
H.D. LIGHTING PARTS BAG
80 AMP CIRCUIT BREAKER DECORATIVE TRIM 7500036 2
25
II-8
Section II - PARTS LIST (cont'd)
PARTS LIST V-70 W/STD STINGER (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
0906027
0400070
0400122
0400367
0400392
0400421
0400431
0400451
0400480
0400490
0400491
0400505
0400511
0401021
0907043
9041402
9043132
9043842
9043944
9043968
9044454
9045359
9046527
9046572
HEAVY DUTY BOLT BAG
1/4-20X1 HHCS GR5 ZP 3/8-16X1.25 HHCS GR5 ZP 1/4-20 NYLOK HEX NUT ZP 3/8-16 NYLOK HEX NUT ZINC 5/8-11 NYLOK HEX NUT ZP 3/4-10 NYLOK HEX GR 8 ZP 1/4 FLATWASHER ZP 3/8 FLATWASHER ZP 3/4 FLATWASHER GR 8 1/2" HCL LKWSHR ZP 5/8" SAE WASHER 48
3/4" LOCKWASHER ZP 3/4-10NC X 2HHCS GR8 ZP KIT, HOLE PLUG TOOL BOX 1/2 NC X 1 1/4 HHCS PLT GR8 3/4NC HEX NUT PLATED 1/4NC-1 HWH SCREW TYPE D 3/4NCX2 1/2 H.H.C.SCREW HHCS 5/8-11 X 2 1/2 GR 8 3/4-10NC X 7 LG HHCS GRD 3/4 TYP SAE WASHER A SER POP RIVET 3/16 X7/16 AL POP RIVET-1/8 X.500 GRIP 0907043
0307052
0400201
0400407
0400491
0400492
0400506
KIT, HOLE PLUG TOOL BOX
WASHER, RUBBER 7/16X1 1/4X1/4 1/2-13X1.5 CRGBLT GR5 ZP 1/2-13 HEX NUT ZP 4
1/2" HCL LKWSHR ZP 1/2" FLATWASHER ZP 5/8 FLATWASHER ZP 0906028
0300364
0300649
0302698
0303290
0303948
0306539
0400122
0400392
0400480
H.D. FITTINGS BAG
CLAMP-HOSE,0.875"-2.75" 50"LBS
UNION, STRAIGHT 12MJ - 12MJ FITTING, HOSE BARB,1-1/4 INSULATED CLAMP 2 1/2 FTG-90DEG ELL 12MJ-16MB90 HOSE BARB 20HOSE16MB90 3/8-16X1.25 HHCS GR5 ZP 3/8-16 NYLOK HEX NUT ZINC 3/8 FLATWASHER ZP 4
4
2
10
2
2
5
5
5
0906839
0400126
0400382
0400481
0400495
0402122
GROUND KIT MTG.HARNESS VULCAN
3/8-16X1 HHCS GR5 ZP. 5/16-18 NYLOK HEX NUT ZP 3/8" EXT.TOOTH LOCKWASHER 5/8" EXT.TOOTH LOCKWASHER 3/8-16NC HEX NUT 316 SS 4
4
4
4
4
II-9
12
8
12
8
48
14
12
16
12
4
4
12
1
4
4
6
4
48
2
4
7
6
8
4
4
4
4
Section II - PARTS LIST (cont'd)
PARTS LIST V-70 W/STD STINGER (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
0906839
0716468
GROUND KIT MTG.HARNESS VUL (cont'd)
LUG - GROUNDING 4
0907304
0301621
0301946
0302123
0302125
0302534
0302740
0303538
0303539
KIT - QUICK DISCONNECT AIR
PRESSURE PROTECTION VLV. FITTING, BLKHD CONNECT HEX NIPPLE 4MP-4MP PIPE, BUSHING 1/2MPT X 1/4FPT FITTING, 45 DEG ELBOW AIR HOSE, 1/2" SYNFLEX DOT FITT, ADAPTER -BRASS 8FP-6MP QUICK DISCONNECT 3/8 FPT 1
1
1
1
2
20
1
1
124002186
0302740
0311037
0910488
QUICK CONNECT AIR SUPPLY
AIR HOSE, 1/2" SYNFLEX DOT 3/8" RED RUBER HOSE 50' PRECUT
FITTINGS BOX, QUICK CONN AIR 20
1
1
0910488
0301621
0301946
0302123
0302125
0302534
0303538
0303539
0303540
0303541
0303542
FITTINGS BOX, QUICK CONN AIR
PRESSURE PROTECTION VLV. FITTING, BLKHD CONNECT HEX NIPPLE 4MP-4MP PIPE, BUSHING 1/2MPT X 1/4FPT FITTING, 45 DEG ELBOW FITT, ADAPTER -BRASS 8FP-6MP QUICK DISCONNECT 3/8 FPT NIPPLE, QUICK DISCONNECT 3/8 NIPPLE, QUICK DISCONNECT QUICK DISCONNECT - BARB 1
1
1
1
2
1
1
1
1
1
945990400
0500554
0500686
0500773
0501101
0501157
9033194
9033196
9033197
9033198
9033212
9033575
9033576
9033577
9033578
9033579
9033580
9033581
9033586
9033587
DUAL CONTROL COMMON DECA
FLAG, AMERICAN LT DECAL - RETRACT CAUTION DECAL PLATE-THROTTLE DECAL-CTRL CABLE SPEED TAG-CAUTION WINCH CABLE DAMAGE
WARNING DECAL MOVING PAR WARN.DECAL,DONT WALK UND WARNING DECAL-CABLE TENS DECAL-SAFETY CHAINS NAME PLATE- VULCAN 4 X1 DECAL - REMOTE DECAL - FREE SPOOL LH WINCH DECAL - TENSIONER DECAL - FREE SPOOL RH WI DECAL - DUAL CONTROL UPP DECAL - DUAL CONTROL LOW DECAL - NEW VULCAN DECAL DUAL CONTROL UPPER DECAL DUAL CONTROL LOWER 2
2
2
2
2
2
2
2
2
4
2
2
2
2
1
1
2
1
1
II-10
Section II - PARTS LIST (cont'd)
PARTS LIST V-70 W/STD STINGER (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
945990400
920950009
DUAL CONTROL COMMON DECA (cont'd)
DECAL - WARNING FOR STIF 2
0908202
0200018
0200019
0200020
0200021
0200023
945539000
KIT, FORK - VULCAN LWRK
FORK-SHORT, 3IN OPNG FORK-SHORT, 4-1/2IN OPNG FORK-MED, 3IN OPNG FORK-MED, 4-1/2IN OPNG FORK-LONG, 4-1/2IN OPNG 6 3/4 CURVED FORK (EACH) 2
2
2
2
2
2
0908203
0310230
0400886
0801186
0801186
KIT, HDU CHAIN ADPTR -VUL LWRK
CLEVIS PIN, 5/8 X 6 ZINC PLT HITCH PIN CLIP,1/8 DIAX2.6 OAL
ADAPTER-HDU CHAIN (LH OR RH) ADAPTER-HDU CHAIN (LH OR RH) 2
2
1
1
0908204
0306564
0801459
KIT, HDU RISER BRKT -VUL LWRK
ALUM T HANDLE 5/8" X 1-1/4" BRKT-RISER-HDU 2
2
0908205
0807023
0908672
KIT, SPRG LIFT BRKT -VUL LWRK
BRKT-PIVOT SPRING LIFT PIN-RET.-SPRING LIFT 2
2
0908672
0302474
0311167
0311210
0400568
0400573
0402020
0718917
PIN-RET.-SPRING LIFT
PIN, LINCH 3/16 3/16 SWAGE FOR 1/8 COATED CABL
CABLE, PIN RETAINER ASSY .125 3/8X3" ROLL PIN ZP 3/16X1-1/4ROLL PIN ZP 1/4-20NC X 3/4 HEX HD SS PIN, RETAINER 1
1
1
1
1
1
1
0908206
0306564
0803591
0803592
0900900
KIT, FORK ADAPTER -VUL LWRK
ALUM T HANDLE 5/8" X 1-1/4" ADAPTER-LEFT FORK ADAPTER-RIGHT FORK PIN-ASSY, RETAINER 2
1
1
2
0900900
0302474
0311167
0311210
0400568
0400573
0402020
0703426
PIN-ASSY, RETAINER
PIN, LINCH 3/16 3/16 SWAGE FOR 1/8 COATED CABL
CABLE, PIN RETAINER ASSY .125 3/8X3" ROLL PIN ZP 3/16X1-1/4ROLL PIN ZP 1/4-20NC X 3/4 HEX HD SS PIN,RETAINER 1
1
1
1
1
1
1
II-11
Section II - PARTS LIST (cont'd)
PARTS LIST V-70 W/STD STINGER (cont'd)
ITEM
PART NUMBER
0908207
0302901
0307995
0310010
9016815
DESCRIPTION
QTY
KIT, PUMP -VUL LWRK
HOSE HYD, 120" 12C12 HOSE, HYD 103" LG SUCTION HOSE,1-1/4ID X50 100R4
MUNCIE PUMP TSPKS17-17-2BSSB 2
2
1
1
0908208
920000501
9401501
9401530
9401540
KIT, MOUNTING -VUL LWRK
REAR MOUNTING PLATE FRONT MTG. PLATE FRONT MTG. BRKT. LOWER FRONT MTG. BRKT. UPPER 2
2
2
2
0908209
920400005
94320052
KIT, MUDFLAP -VUL LWRK
MUD FLAP BRACE PLATE MUD FLAP 920-940 RUBBER 2
1
946570000
0301895
0400344
9044151
915150005
920220008
945510006
945510007
946350005
946570500
946571000
946571100
5X5 LIFT BAR ASSEMBLY V-60 GREASE FITTING,STR 1/8 PTF 1/2-13X3/4 LG FLAT HD SOCKET 8
3/4-10 X 3/4 SOCKET HEA THRUST WASHER - V-40, LOCKING TAB BEARING - ALUM. BRONZE THRUST WASHER - V-60, PIVOT PIN - 5 CROSSBAR 5" CROSSBAR WELD'T TOP COVER PLATE WELD'T BOTTOM COVER PLATE WELD. 1
3
6
4
1
1
2
1
1
1
1
1
II-12
NOTES
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive • Ooltewah, Tennessee 37363 • (423) 238-4171
www.millerind.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement