Extron electronics | System 7SC | im Vertrieb von CAMBOARD Electronics www.camboard.de Tel

im Vertrieb von CAMBOARD Electronics www.camboard.de Tel
im Vertrieb von
IR 701 Remote Control Instruction Guide
CAMBOARD Electronics
IR 701 Remote Control Instruction Guide
Install two AAA batteries as shown at right.
Install two AAA batteries as shown at right.
Operation
Operation
The buttons on the IR 701 duplicate the System 7SC‘s front panel controls for
normal operation. See the other side of this card for details. The switcher responds
to commands from the IR 701 as if that button or knob were pressed or rotated on the switcher. From
a distance of no more than 30 feet, the IR 701 sends infrared (IR) signals to the System 7SC via the
switcher’s front panel IR port or the IR port of an optional SCP 200 or SCP 250 control pad.
The buttons on the IR 701 duplicate the System 7SC‘s front panel controls for
normal operation. See the other side of this card for details. The switcher responds
to commands from the IR 701 as if that button or knob were pressed or rotated on the switcher. From
a distance of no more than 30 feet, the IR 701 sends infrared (IR) signals to the System 7SC via the
switcher’s front panel IR port or the IR port of an optional SCP 200 or SCP 250 control pad.
Setup operations cannot be performed from the IR 701.
Setup operations cannot be performed from the IR 701.
The three Display buttons (Power, Mute, and Mode) will not function until IR and/or RS-232 commands
have been stored in their memories. Each Display button can also have a Room command associated
with it. Each Room button and each input selection button can also have an IR command and/or an
RS-232 command associated with it. Refer to the System 7SC User’s Manual for details.
The three Display buttons (Power, Mute, and Mode) will not function until IR and/or RS-232 commands
have been stored in their memories. Each Display button can also have a Room command associated
with it. Each Room button and each input selection button can also have an IR command and/or an
RS-232 command associated with it. Refer to the System 7SC User’s Manual for details.
Commands are transmitted from the switcher’s RS-232 projector control port, IR Emitter, or optional
IR Broadcaster when the corresponding button is pressed on the IR 701, the SCP control pad, or the
switcher’s front panel.
Commands are transmitted from the switcher’s RS-232 projector control port, IR Emitter, or optional
IR Broadcaster when the corresponding button is pressed on the IR 701, the SCP control pad, or the
switcher’s front panel.
Control functions
Control functions
Display Power — After the System 7SC switcher is programmed (set up) with learned or downloaded commands, press this button to toggle the projector’s power on or off. The switcher’s LCD
shows DISPLAY POWER EXECUTING COMMAND during projector power up or down.
Display Mute — After setup, this button functions as the display’s video mute on/off switch.
Display Mode — After the switcher is set up, this button activates any RS-232 or IR command stored
in its memory.
Vol + and - — Press these buttons to adjust the volume of the variable audio output. (See other side.)
Display Power — After the System 7SC switcher is programmed (set up) with learned or downloaded commands, press this button to toggle the projector’s power on or off. The switcher’s LCD
shows DISPLAY POWER EXECUTING COMMAND during projector power up or down.
Display Mute — After setup, this button functions as the display’s video mute on/off switch.
Display Mode — After the switcher is set up, this button activates any RS-232 or IR command stored
in its memory.
Vol + and - — Press these buttons to adjust the volume of the variable audio output. (See other side.)
IR 701 Remote Control Instruction Guide
IR 701 Remote Control Instruction Guide
Install two AAA batteries as shown at right.
Install two AAA batteries as shown at right.
Operation
Operation
The buttons on the IR 701 duplicate the System 7SC‘s front panel controls for
normal operation. See the other side of this card for details. The switcher responds
to commands from the IR 701 as if that button or knob were pressed or rotated on the switcher. From
a distance of no more than 30 feet, the IR 701 sends infrared (IR) signals to the System 7SC via the
switcher’s front panel IR port or the IR port of an optional SCP 200 or SCP 250 control pad.
The buttons on the IR 701 duplicate the System 7SC‘s front panel controls for
normal operation. See the other side of this card for details. The switcher responds
to commands from the IR 701 as if that button or knob were pressed or rotated on the switcher. From
a distance of no more than 30 feet, the IR 701 sends infrared (IR) signals to the System 7SC via the
switcher’s front panel IR port or the IR port of an optional SCP 200 or SCP 250 control pad.
Setup operations cannot be performed from the IR 701.
Setup operations cannot be performed from the IR 701.
The three Display buttons (Power, Mute, and Mode) will not function until IR and/or RS-232 commands
have been stored in their memories. Each Display button can also have a Room command associated
with it. Each Room button and each input selection button can also have an IR command and/or an
RS-232 command associated with it. Refer to the System 7SC User’s Manual for details.
The three Display buttons (Power, Mute, and Mode) will not function until IR and/or RS-232 commands
have been stored in their memories. Each Display button can also have a Room command associated
with it. Each Room button and each input selection button can also have an IR command and/or an
RS-232 command associated with it. Refer to the System 7SC User’s Manual for details.
Commands are transmitted from the switcher’s RS-232 projector control port, IR Emitter, or optional
IR Broadcaster when the corresponding button is pressed on the IR 701, the SCP control pad, or the
switcher’s front panel.
Commands are transmitted from the switcher’s RS-232 projector control port, IR Emitter, or optional
IR Broadcaster when the corresponding button is pressed on the IR 701, the SCP control pad, or the
switcher’s front panel.
Control functions
Control functions
Display Power — After the System 7SC switcher is programmed (set up) with learned or downloaded commands, press this button to toggle the projector’s power on or off. The switcher’s LCD
shows DISPLAY POWER EXECUTING COMMAND during projector power up or down.
Display Mute — After setup, this button functions as the display’s video mute on/off switch.
Display Mode — After the switcher is set up, this button activates any RS-232 or IR command stored
in its memory.
Vol + and - — Press these buttons to adjust the volume of the variable audio output. (See other side.)
www.camboard.de
Display Power — After the System 7SC switcher is programmed (set up) with learned or downloaded commands, press this button to toggle the projector’s power on or off. The switcher’s LCD
shows DISPLAY POWER EXECUTING COMMAND during projector power up or down.
Display Mute — After setup, this button functions as the display’s video mute on/off switch.
Display Mode — After the switcher is set up, this button activates any RS-232 or IR command stored
in its memory.
Vol + and - — Press these buttons to adjust the volume of the variable audio output. (See other side.)
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
im Vertrieb von
CAMBOARD Electronics
IR 701 Remote Control Instruction Guide, continued
IR 701 Remote Control Instruction Guide, continued
CONTROL
DISP
PWR
DISP
MUTE
MODE
CONTROL
ROOM
1
ROOM
2
COLOR TINT
BRIGHT CONT
DETAIL
ADJUST
DISP
PWR
DISP
MUTE
MODE
ROOM
1
ROOM
2
1
2
3
4
5
COLOR TINT
BRIGHT CONT
DETAIL
ADJUST
VOLUME
MENU
Control Functions
Display
Power
Audio
Display
Mute
1
2
3
4
5
6
7
DISPLAY
INPUT 7
VIDEO
VIDEO
S-VIDEO
S-VIDEO
AUDIO
COMPUTER
Mute
LL
Volume
Mode
VOLUME
BRIGHT CONT
NEXT
IR
RX LEARN
MENU
ADJUST
Control Functions
VOLUME
TX
RX
RR
DETAIL
MENU
DISPLAY
DISPLAY
MUTE
6
7
S-VIDEO
S-VIDEO
IR
RX LEARN
TX
RX
AUDIO
MAX/
MODE
DISPLAY
AUDIO
COMPUTER
Mute
Volume
Mode
SYSTEM 7SC
IR
MIN
VOLUME
DISPLAY
POWER
er
Disp
Pow
Fun
ns
lay
DispMut
ctio
e
e
Mut
io
Aud e
Mod
me
Volu
4
7
8
ER
ENT
MODE
6
Mute
Mode
Volume
4
5
6
8
9
0
7
Image Adjustments
CONT
IR 701
System Remote
Room 2
SHIFT
Image Adjustments
TINT
BRIGHT
DETAIL
IR 701
System Remote
IR 701
68-543-01, Rev. B
03 02
Printed in the USA.
Input selection buttons — Press the button(s) for the number of
the desired input, then press the Enter button to select that input.
The corresponding button lights on the System 7SC’s front panel.
Audio
Display
Mute
1
2
3
ROOM
2
COLOR TINT
BRIGHT CONT
4
5
6
7
DETAIL
www.extron.com
Extron Electronics, USA
Extron Electronics, Europe
Extron Electronics, Asia
Extron Electronics, Japan
1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500
Fax 714.491.1517
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664
Daisan DMJ Building 6F
3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074 Japan
+81.3.3511.7655
Fax +81.3.3511.7656
S-VIDEO
S-VIDEO
AUDIO
LL
Mode
RR
DETAIL
IR
RX LEARN
TX
RX
DISP
PWR
DISP
MUTE
MODE
ROOM
1
ROOM
2
1
2
3
4
5
COLOR TINT
BRIGHT CONT
MENU
ADJUST
Control Functions
VOLUME
System 7SC
Front Panel
MENU
DISPLAY
MUTE
Audio
Display
Mute
6
7
DETAIL
S-VIDEO
S-VIDEO
IR
RX LEARN
TX
RX
AUDIO
MAX/
MODE
Volume
Mode
SYSTEM 7SC
IR
MIN
VOLUME
AUDIO
RR
System 7SC
Front Panel
DETAIL
IR 701
ADJUST
NEXT
IR
RX LEARN
TX
RX
AUDIO
MAX/
MODE
SYSTEM 7SC
ol
ntr
lay
er
Disp
Pow
Fun
ns
lay
DispMut
ctio
e
e
Mut
io
Aud e
Mod
me
Volu
Sele
n
ctio 3
6
4
7
4
5
6
7
8
ER
ENT
Mute
Mode
Volume
5
6
9
0
CONT
8
SHIFT
TINT
DETAIL
IR 701
System Remote
Room 2
CONT
Image Adjustments
BRIGHT
DETAIL
IR 701
System Remote
IR 701
68-543-01, Rev. B
03 02
Printed in the USA.
IR 701
Remote
SCP 250
SCP 250
System
7SC
40
40
Tel. 07131 911201
Fax 07131 911203
www.extron.com
30 feet
max.
Input selection
Input selection buttons — Press the button(s) for the number of
the desired input, then press the Enter button to select that input.
The corresponding button lights on the System 7SC’s front panel.
Control Functions
Display
Power
Audio
Display
Mute
Mute
Mode
Volume
BRIGHT
ENTER
Room 1
COLOR
Image Adjustments
4
7
mo
SHIFT
Audio
Display
Mute
Input Selection
2
3
701 te
Re
Control Functions
Display
Power
IR
Daisan DMJ Building 6F
3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074 Japan
+81.3.3511.7655
Fax +81.3.3511.7656
tem
Sys
Room 2
COLOR
1
AIL
DET
Extron Electronics, Japan
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664
2
T
Extron Electronics, Asia
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050
GH
The + and - centering (H-Shift, V-Shift) and picture adjustment
controls (Color, Tint, Brightness, Contrast, and Detail)
increment or decrement the adjustment settings.
While Executive Mode is active, adjustments cannot be
made; adjustment controls are locked in Executive Mode.
Extron Electronics, Europe
3
Room 1, Room 2 — These toggle the switcher’s relay contacts to
control items such as lights and display screens.
TINT
1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500
Fax 714.491.1517
2
ENTER
Room 1
30 feet
max.
ents
BRI
40
7
ustm
Adj
mo
701 te
Re
IR
tem
Input selection buttons — Press the button(s) for the number of
the desired input, then press the Enter button to select that input.
The corresponding button lights on the System 7SC’s front panel.
Extron Electronics, USA
ut
NT
Sys
0
ge
Ima
AIL
DET
9
CO
T
8
1
T
TIN
GH
ents
BRI
ustm
Adj
6
LOR
CO
ge
Ima
NT
CO
5
ROOM
2
FT
SHI
T
TIN
System
7SC
ROOM
1
2
ER
ENT
FT
SHI
SCP 250
SCP 250
40
www.camboard.de
MUTE
m
2
LOR
CO
4
Roo
8
m
IR 701
Remote
Adjustments
IR 701
System Remote
www.extron.com
Input Selection
2
3
Inp
7
1
6
m
5
0
4
Roo
3
9
4
2
BRIGHT
DETAIL
BRIGHT
IR 701
System Remote
IR
5
n
ctio 3
Roo
CONT
1
me
Volu
1
1
Input selection
Image Adjustments
Image Adjustments
TINT
CONT
VOLUME
1
Mut
7
m
TINT
SHIFT
COLOR
Co
e
io
Aud e
Mod
6
0
Roo
COLOR
8
Room 2
MIN
e
Sele
9
ROOM
2
Room 1, Room 2 — These toggle the switcher’s relay contacts to
control items such as lights and display screens.
SHIFT
MENU
DISPLAY
lay
2
5
ROOM
1
ENTER
Room 2
4
ENTER
VOLUME
SYSTEM 7SC
POWER
ns
DispMut
0
0
COMPUTER
ctio
9
Room 1
9
7
Room 1
DISPLAY
Fun
8
7
DETAIL
IR
RX LEARN
TX
RX
ol
ntr
lay
er
Disp
Pow
6
6
68-543-01, Rev. B
03 02
Printed in the USA.
BRIGHT CONT
COMPUTER
Co
5
ut
4
5
ADJUST
NEXT
DISPLAY
INPUT 7
VIDEO
VIDEO
Mute
NEXT
COMPUTER
POWER
Display
Power
LL
SYSTEM 7SC
DISPLAY
Inp
Input Selection
2
3
Volume
VOLUME
BRIGHT CONT
NEXT
COMPUTER
1
1
Mute
Mode
Input Selection
2
3
IR 701 Remote Control Instruction Guide, continued
ADJUST
DISPLAY
INPUT 7
VIDEO
VIDEO
Mute
Volume
Audio
Display
Mute
1
CONTROL
ROOM
1
MENU
Control Functions
Control Functions
Display
Power
The + and - centering (H-Shift, V-Shift) and picture adjustment
controls (Color, Tint, Brightness, Contrast, and Detail)
increment or decrement the adjustment settings.
While Executive Mode is active, adjustments cannot be
made; adjustment controls are locked in Executive Mode.
VOLUME
Display
Power
30 feet
max.
Adjustments
DETAIL
ENTER
CONT
40
BRIGHT
Room 1
COLOR
40
CONTROL
DISP
MUTE
n
ctio 3
Sele
SHIFT
IR 701 Remote Control Instruction Guide, continued
DISP
PWR
2
Daisan DMJ Building 6F
3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074 Japan
+81.3.3511.7655
Fax +81.3.3511.7656
ut
mo
Display
Mute
Input Selection
2
3
701 te
Re
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664
IR
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050
tem
Sys
Display
Power
SCP 250
System
7SC
Input selection
Room 2
Audio
1
AIL
DET
1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500
Fax 714.491.1517
Inp
T
Extron Electronics, Japan
GH
BRI
www.extron.com
Extron Electronics, Asia
7
Room 1, Room 2 — These toggle the switcher’s relay contacts to
control items such as lights and display screens.
COLOR
Control Functions
The + and - centering (H-Shift, V-Shift) and picture adjustment
controls (Color, Tint, Brightness, Contrast, and Detail)
increment or decrement the adjustment settings.
While Executive Mode is active, adjustments cannot be
made; adjustment controls are locked in Executive Mode.
Extron Electronics, Europe
6
SCP 250
IR 701
Remote
ents
30 feet
max.
Input selection buttons — Press the button(s) for the number of
the desired input, then press the Enter button to select that input.
The corresponding button lights on the System 7SC’s front panel.
Extron Electronics, USA
5
ENTER
Room 1
Adjustments
IR 701
System Remote
ustm
Adj
40
7
TINT
DETAIL
NT
mo
701 te
Re
IR
tem
Sys
40
BRIGHT
CONT
4
ge
Ima
AIL
DET
0
CO
T
GH
BRI
9
3
T
TIN
Adj
ents
8
LOR
CO
ge
Ima
ustm
6
2
FT
SHI
T
TIN
NT
CO
5
1
2
ER
ENT
FT
SHI
SCP 250
ROOM
2
m
2
LOR
CO
4
Roo
8
m
SCP 250
IR 701
Remote
System
7SC
1
7
ROOM
1
m
6
0
5
Roo
4
9
3
5
4
Roo
TINT
1
Input Selection
2
3
me
Volu
2
1
Mut
1
1
Input selection
Image Adjustments
SYSTEM 7SC
ol
ntr
Co lay
e
io
Aud e
Mod
m
COLOR
TX
RX
AUDIO
MAX/
MODE
IR
e
7
0
Roo
ROOM
2
Room 1, Room 2 — These toggle the switcher’s relay contacts to
control items such as lights and display screens.
SHIFT
MUTE
VOLUME
lay
6
n
ctio 3
Sele
9
ROOM
1
ENTER
Room 2
IR
RX LEARN
MIN
ns
DispMut
0
NEXT
DISPLAY
ctio
9
Room 1
MENU
COMPUTER
Fun
8
7
ADJUST
VOLUME
SYSTEM 7SC
System 7SC
Front Panel
er
Disp
Pow
6
ut
Inp
2
5
DETAIL
IR
RX LEARN
TX
RX
RR
ol
ntr
Co lay
1
4
5
1
Input Selection
2
3
BRIGHT CONT
NEXT
INPUT 7
VIDEO
VIDEO
NEXT
COMPUTER
POWER
Audio
Display
Mute
LL
SYSTEM 7SC
System 7SC
Front Panel
Display
Power
Adjustments
The + and - centering (H-Shift, V-Shift) and picture adjustment
controls (Color, Tint, Brightness, Contrast, and Detail)
increment or decrement the adjustment settings.
While Executive Mode is active, adjustments cannot be
made; adjustment controls are locked in Executive Mode.
Extron Electronics, USA
Extron Electronics, Europe
Extron Electronics, Asia
Extron Electronics, Japan
1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500
Fax 714.491.1517
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664
Daisan DMJ Building 6F
3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074 Japan
+81.3.3511.7655
Fax +81.3.3511.7656
1
Input Selection
2
3
5
6
9
0
4
7
8
ENTER
Room 1
Room 2
SHIFT
COLOR
TINT
CONT
Image Adjustments
BRIGHT
DETAIL
IR 701
System Remote
IR 701
68-543-01, Rev. B
03 02
Printed in the USA.
ce-info@camboard.de
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising