Venmar V10 Specification

Venmar V10 Specification
Product Catalog
Direct Sales to:
n
Builders
n
Utilities
n
Contractors
n
Agencies
n
Trades
n
ESCOs
Energy Efficient Lighting
Ventilation Equipment
Air Sealing Products
Spray Foam Kits
Meters & Testing Equipment
Orders 800/876/0660 x1
|
Fax 888/440/4219
| efi.org/wholesale | [email protected]fi.org
V10
About Us
EFI is your trusted advisor for energy efficiency.
Products
Since 1982, EFI has been supplying energy efficient products to:
• Contractors
• Utilities
• Weatherization Programs
•P
roperty Managers
•E
nergy Service Providers
• Colleges and Universities
We work closely with manufacturers to purchase high quality materials
in quantities that allow us to sell at competitive prices and ship within
24 hours from in stock inventory.
At EFI we take pride in our:
• Product Knowledge
• Technical Expertise
• Warehousing and Logistics
Helping our clients choose the correct products for their needs along
with our fast service distinguishes EFI. We maintain an extensive assortment of inventory representing thousands of items, insuring that our
customers receive product when and where they need it.
Services
EFI works with dozens of utility companies and other providers of energy
efficiency programs across the country. We have consistently helped our
clients reach and often exceed their annual goals for KWh savings. We will
help you build customer loyalty and brand enhancement.
EFI provides expertise in the areas of:
• Rebate Processing
• Incentive Programs
arge Scale Product (“Kit”) Distribution Initiatives
•L
• Website Development
Our proprietary software captures all the information our clients need. We
are able to report on product usage, penetration rates and customer
satisfaction metrics in real time.
With over 30 years of experience EFI knows what types of programs,
products and services work well. We are always available to share best
practices and serve as a trusted advisor and partner to our clients.
|
2 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
What's Inside
Lighting.................................. 4
Air Sealing............................ 54
LED Lighting
Protective Gear
CFL Lighting
Low Expansion Foam
High Expansion Foam
Ventilation............................ 16
Air Sealing Accessories
Ventilation Information
Air Leakage Detectors
Venmar HRVs and ERVs
Attic Sealing
Panasonic ERV
Door and Window Weather Strip
Fantech HRVs and ERVs
Duct Sealing
Panasonic Whisper Fans
SIGA Professional Tapes
Measuring Devices............... 78
Delta Breez Fans
Electricity Monitors
Broan Ultra Fans
Advanced Power Strips
Fantech Dryer Boost Fan
Programmable Thermostats
Tamarack Manufactured Housing
Bath Fan
Health and Safety................. 86
Fantech Range Hoods
Carbon Monoxide Alarms
Fantech Remote Fans
Smoke and Fire Detectors
Radon Control Products
HEPA Filtered Lead Vacuums
Ventilation Accessories
Timers and Controls
Pressure Balancing
Testing Equipment............... 74
Water Conservation
Products............................... 88
TEC Blower Door
Water Saving Products
TEC Duct Blaster
FLIR IR Cameras
Exterior Rain Control .......... 90
Extech Borescopes
Rain Control Products
Bacharach Combustion
Testing Equipment
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 3
LED Lighting
EFI offers a wide array of Light Emitting Diode (LED) lighting. LEDs offer
better light quality than incandescent bulbs, last 25,000 or more hours, and
use even less energy than Compact Fluorescent Bulbs (CFL).
Most good quality LEDs are rated to last 20–40,000 hours. This usually
translates to a 6–10 year lifetime depending on usage. (One year is
8,760 hours.)
LEDs offer the following advantages over incandescent and compact
fluorescent lighting:
• LEDs do not contain mercury, lead or cadmium
• Very low energy use
• Directed, focused light
• Low “total cost of ownership” because of long lifetime
• Instant on, even in extremely low temperatures
• Durable with regard to impact and vibration
• No ultra-violet rays — will not fade fabrics or paintings
|
LED Wattage
Approx. Incandescent Equivalent
Lumens/output
6–8w
40w
~450
10w
60w
~800
12–14w
75w
~1,100
15–19w
100w
~1,600
4 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Lighting
LED Lighting
A Lamps
A Lamps are suitable replacements for
general use incandescent or compact
fluorescent light bulbs.
1100.296
1100.295
1100.4074
1100.0187
1100.0172
1100.0188
1100.157
1100.158
1100.1571
1100.1553
1100.1552
Lumens
Watt
Kelvin
Hours
Dimensions (L x W)
Case
4.4" x 2.4"
6
A Lamps
1100.296 Cree A19
450
6
2,700
25,000
1100.4074
TCP A19
450
7
2,700
25,000
4.5" x 2.4"
12
1100.157
Philips A19
470
8
2,700
25,000
4.0" x 2.25"
6
1100.295
Cree A19
800
9.5
2,700
25,000
4.4" x 2.4"
6
1100.0172
TCP A19
800
10
2,700
25,000
4.5" x 2.6"
8
1100.1571
Philips A19 Slim
800
10.5
2,700
25,000
4." x 2.7"
6
1100.158
Philips A21
830
11
2,700
25,000
4.0" x 2.25"
6
1100.1552
Philips A21
1,080
15
2,700
25,000
4.8" x 2.5"
6
1100.0187
TCP A21
1100
13
2,700
25,000
5.3 x 3.1
12
1100.0188
TCP A21
1600
18
2,700
25,000
5.3 x 3.1
12
1100.1553
Philips A21
1,680
19
2,700
25,000
4.8" x 2.5"
6
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 5
LED Lighting
Reflectors
Most recessed cans are 4, 5 or 6" openings.
Choose a reflector that will fit the can you
are working with.
• R-16 reflectors are 2.0" across the face
• R-20 reflectors are 2.5" across the face
• R-30 reflectors are 3.75" across the face
• R-38 reflectors are 4.75" across the face
• R-40 reflectors are 5" across the face
Lumens
Watt
Kelvin
Hours
Dimensions (L x W)
Case
LED Floods and Reflectors
R-16
|
1100.983 GE R-16 — Non-dimming
200
4.5
3,000
25,000
2.87" x 2.0"
6
1100.4073
R-20
TCP R-16
340
7
2,700
25,000
2.5" x 2"
12
1160.973 Philips R-20
470
8
3,000
45,000
3.25" x 2.5"
6
1160.534
TCP BR-20
500
8
2,700
25,000
3.25" x 2.5"
12
1160.7231
R-30
TCP R-20
500
8
2,700
25,000
3.5" x 2.5"
12
1160.538
TCP R-30
650
10
2,700
25,000
5.4" x 3.8"
12
1160.9823
Philips R-30
730
9.5
2,700
25,000
5.1" x 3.75"
12
1160.532
R-38
TCP R-30
850
12
2,700
25,000
5.4" x 3.8"
12
1160.9997 R-40
TCP R-38
850
14
2,700
25,000
5.3" x 4.8"
12
1440.913 Cree CR6 Module
625
9.5
2,700
50,000
Fits 6" Rec Can
10
1440.911 Cree CR6 Module
800
12
2,700
50,000
Fits 6" Rec Can
10
1160.9831 Philips BR-40
800
12
2,700
50,000
7.3" x 5."
6
1160.536
TCP BR-40
850
12
2,700
25,000
6.6" x 5"
12
1160.535
Retrofit
TCP BR-40
1200
17
2,700
25,000
6.6" x 5"
12
1440.414 TCP Rec Can Module 4"
650
10
3,000
35,000
Fits 4" Rec Can
6
1160.9994 TCP Rec Can Module 6"
650
12
2,700
35,000
Fits 5" or 6" Rec Can
6
1440.413 TCP Rec Can Module 6"
820
14
3,000
35,000
Fits 5" or 6" Rec Can
6
6 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Lighting
LED Lighting
Reflectors
R-16
R-20
1100.983
1100.4073
1160.973
R-30
1160.534
1160.7231
R-38
1160.538
1160.532
1160.9823
R-40
1160.9997
Retrofit
1160.9831
1160.536
1160.535
1440.913
1440.911
1440.414
1160.9994
1440.413
How a bulb is measured
Width
Width
Height
Height
Height
Width
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 7
LED Lighting
Decorative, MR-16s, and Globes
MR16
Decorative
1100.989
1100.0181
1100.0178
1100.9092
1100.0177
1100.0173
Globes
1100.987
1100.539
1100.8087
1100.695
Lumens
Watt
Kelvin
Hours
Dimensions (L x W)
Case
Decorative
1100.989
GE Candle Base – Clear Flame
75
2
3,000
15,000
4.1" x 1.38"
3
1100.0181
TCP Candle Base – Clear Torpedo
300
5
2,700
25,000
3.8" x 1.4"
12
1100.0178
TCP Medium Base – Clear Torpedo
300
5
2,700
25,000
3.8" x 1.4"
12
1100.9092
MaxLite MR16 (GU 5.3 base)
400
5
2,700
25,000
2.0" x 2.0"
12
1100.0177
TCP MR16 (GU 5.3 base)
500
7
2,700
25,000
2.0" x 2.0"
12
1100.0173
TCP MR16 (GU 10 base)
500
7
2,700
25,000
2.5" x 2.0"
12
1100.987
GE Globe
95
2.3
3,000
15,000
4.3" x 3.12
3
1100.539
TCP Globe
300
5
2,700
25,000
4.3" x 3.1"
6
1100.8087
TCP Globe
500
8
2,700
25,000
4.3" x 3.1"
6
1100.695
Feit Globe
510
8
3,000
25,000
4.35" x 3.15"
12
MR16
Globes
|
8 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Lighting
LED Light Fixtures
All MaxLite LED fixtures have the following features:
• Energy saving replacement for metal halide and high-pressure
sodium fixtures
• Replaces fixtures from 100 watt incandescent through 175 watt
metal halide fixtures
• Heavy-duty die cast aluminum one-piece housing is polyester TGIC
• 5 Year Limited Warranty
• 50,000 hour life at L70 standards
Ask us about other commercial lighting options!
MaxLite LED Wall Packs
• Lens: High quality shock-proof poly carbonate
• Can mount to recessed outlet box or direct to surface
• Driver: Self contained driver meets UL 1310 UL 48 Class2
• Occupancy / Dusk to dawn sensor compatible
30w MaxLite LED Wallpack
40w MaxLite LED Wallpack
37w MaxLite LED Garage Canopy
• 2,300 Lumens
• 2,000 Lumens
• 2,930 Lumens
• 5,000° Kelvin Temperature
• 5,000° Kelvin Temperature
• 5,000° Kelvin Temperature
• 14.25" x 9" x 7.5"
• 18.5" x 9.5" x 9"
• 12.25" x 12.25" x 9"
• 150w Metal Halide Equivalency
• 175w Metal Halide Equivalency
• 175w Metal Halide Equivalency
• Mounting: All models come with yoke arm
standard and NPT fitting adaptor included
• Full flood classification with ultra wide
80 degree flood beam angle
MaxLite LED Floods
• Lens: Black ceramic frit on tempered glass
for reduced glare and improved finish
14w MaxLite LED Flood
25w MaxLite LED Flood
45w MaxLite LED Flood
• 1,160 Lumens
• 1,670 Lumens
• 3,620 Lumens
• 5,000° Kelvin Temperature
• 5,000° Kelvin Temperature
• 5,000° Kelvin Temperature
• 3.4" x 4.5" x 4.0"
• 5.6" x 7.1" x 5.4"
• 7.6" x 8.9" x 6.3"
Ordering Information
MaxLite LED Wall Packs
MaxLite LED Floods
1300.552
30w MaxLite LED Wallpack
1300.609
14w MaxLite LED Flood
1300.570
40w MaxLite LED Wallpack
1300.6081
25w MaxLite LED Flood
1300.554
37w MaxLite LED Garage Canopy
1300.6071
45w MaxLite LED Flood
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 9
LED Light Fixtures
14.5w LED Replacement T-8
• Plug and play – no need to re-wire
• Reduce wattages from 32w to 14.5w
• 40,000 life
• Rugged plastic tube — unbreakable
• No phosphors
LED Exit Sign
• 25 Year lifetime
• Draws less than 2w
• Double sided, Universal mounting
• UL listed for use in damp locations
• 6 volt maintenance free nickel
cadmium battery
• 1.5 hours of operation in the case of a
power outage
• Dimensions: 12.75" x 8.5" x 1.75"
LED Exit Sign Screw In Lamps
• Retrofit most existing signs
• Red LEDs
• 4.7" x 1.25"
• 10 year life expectancy
• UL 924 specifications
• Set of 2 lamps includes candelabra, intermediate and bayonet base adapters
LED Night Light
• Direct plug-in
• Blue LEDs behind a plastic diffuser
• Soft light for a room or hall
• Photocell operated — no on/off switch
Ordering Information
Philips LED Insta-fit
LED Exit Sign Screw In Lamps
1000.691
1180.092
14w LED Replacement T8—4000k
LED Exit Sign
1180.1
|
Set of 2 Lamps Plus Adaptors
LED Night Light
LED Exit Sign
1600.222
10 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
LED Nightlight
Lighting
Compact Fluorescent Lighting
EFI offers a wide selection of compact fluorescent lights (CFLs). CFLs are
designed to produce a high-quality, incandescent-like warm light and use
about 70% less electricity than conventional incandescent lights.
Most good quality CFLs are rated to last between 8,000 and 12,000 hours.
This usually translates to a 2–4 year lifetime depending on usage. (One year
is 8,760 hours.)
Not all dimming switches are compatible with dimming CFLs. There are
times when flickering and/or buzzing may occur with certain switch and
lamp combinations. If you are looking for CFLs for a dimming application,
we suggest that you buy a small quantity of dimming CFLs and try them in
your application before re-lamping a large area.
Unless specified, CFLs are not rated for use in outdoor fixtures. If used
outdoors they should be in an enclosed fixture protected from the elements.
Enclosed post lights and porch ceiling fixtures are good places to install CFLs.
CFL Wattage
Approx. Incandescent Equivalent
Lumens/output
5w
25w
~250
7–10w
40w
~450
11w
40w
~600
13w
50–60w
~750
15w
60w
~900
20w
75w
~1,200
23w
90w
~1,400
26w
100w
~1,700
42w
150w
~2,600
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 11
Compact Fluorescent Lighting
Spirals and A Lamps
Spirals and "A" Lamps are commonly
used in table/floor lamps and weatherprotected exterior fixtures.
Wattage
Lumens
Kelvin
Hours
Dimensions
Case
Min Temp
Spirals
1100.128
TCP
13
800
2,700
10,000
4.4" x 1.7"
12
-20°F
1100.138
TCP
20
1,200
2,700
10,000
4.4" x 2.3"
12
-20°F
1100.053
Maxlite
20
1,200
5,000
10,000
4.9" x 2.4"
12
0°F
1100.139
TCP
23
1,600
2,700
10,000
4.8" x 2.3"
12
-20°F
1100.339
TCP
27
1,850
2,700
10,000
5.4" x 2.3"
48
-20°F
1100.198
Maxlite
30
1,900
2,700
8,000
5.6" x 2.8"
12
0°F
1100.924
Maxlite
42
2,600
2,700
8,000
6.2" x 2.8"
24
0°F
30-70-100
2,100
2,700
10,000
6.1" x 2.65"
12
-0°F
TCP
14
1,500
2,700
10,000
4.4" x 2.0"
12
-20°F
1100.910
Maxlite
13
800
2,700
10,000
4.2" x 2.4"
12
0°F
1100.794
TCP
14
700
2,700
8,000
4.58" x 2.4"
48
-20°F
1100.9271
Maxlite
18
1,100
2,700
8,000
5.1" x 2.6"
24
0°F
16
850
2,700
12,000
5.5" x 2.4"
48
0°F
Spirals — 3-way
1100.828
Maxlite
Spirals — Dimmable
1100.770
“A” Lamps
“A” Lamps Dimmable
1100.728
TCP
“A” Lamps — Dimmable — Cold Cathode
|
1100.010
TCP
5
200
2,700
25,000
4.0" x 2.0"
48
-20°F
1100.302
Litetronics
8
325
2,850
18,000
4.9" x 2.4"
15
0°F
12 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Lighting
Compact Fluorescent Lighting
Reflectors
Most recessed cans are 4, 5 or 6"
openings. Choose a reflector that will
fit the can you are working with.
• R-30 reflectors are 3.75" across the face
• R-38 reflectors are 4.75" across the face
• R-40 reflectors are 5" across the face
Wattage
Lumens
Kelvin
Hours
Dimensions
Case
Min Temp
16
-20°F
Reflectors
R-30
1160.659
TCP
14
645
2,700
8,000
5.4" x 3.7"
1160.471
Philips
15
750
2,700
10,000
5.7" x 3.7"
6
-22°F
1160.619
GE
16
750
2,700
10,000
5.5" x 3.7"
10
5°F
Feit
23
1,300
2,650
6,000
5.8" x 4.7"
12
-27°F
1160.6381 TCP
19
950
2,700
8,000
5.9" x 5.0"
12
-20°F
1160.613
26
1,300
2,700
10,000
6.5" x 5.0"
12
-15°F
R-38
1160.08
R-40
GE
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 13
Compact Fluorescent Lighting
Decorative and Globes
Decorative bulbs are commonly used
in decorative fixtures where you can see
the light bulb.
Globes are commonly used
in bathroom vanity bars.
Wattage
Lumens
Kelvin
Hours
Dimensions
Case
Min Temp
Base
8,000
4.4" x 1.75"
48
-20°F
Candelabra
Decorative
1100.758
TCP
9
425
2,700
1100.760
TCP
14
720
2,700
8,000
5.4" x 1.9"
48
-20°F
Candelabra
1100.102
Maxlite
7
340
2,700
10,000
4.8" x 1.4"
24
0°F
Medium
1100.753
TCP
9
425
2,700
8,000
4.8" x 1.6"
48
-20°F
Medium
1100.079
GE
9
430
2,700
6,000
5.4" x 1.75"
10
5°F
Medium
1100.754
TCP
14
720
2,700
8,000
5.4" x 2.4"
48
-20°F
Medium
Decorative — Dimmable — Cold Cathode
1100.020
TCP
5
190
2,700
25,000
4.8" x 1.4"
48
-20°F
Candelabra
1100.125
TCP
5
200
2,700
25,000
4.8" x 1.4"
48
-20°F
Medium
1100.122
TCP
8
300
2,700
25,000
6.4" x 2.0"
48
-20°F
Medium
Decorative — Dimmable
1100.709
Bulbrite
25
300
2,700
3,000
3.9" x 1.5"
10
0
Candelabra
1100.707
Bulbrite
25
300
2,700
3,000
3.9" x 1.5"
10
0
Medium
Globes
|
1100.755
TCP
9
490
2,700
8,000
4.2" x 3.1"
24
-20°F
1100.945
Feit
11
550
2,700
8,000
4.25" x 3.15"
48
-27°F
1100.905
Maxlite
14
800
2,700
10,000
4.7" x 3.1"
12
0°F
1100.784
TCP
14
800
2,700
8,000
4.9" x 3.25"
24
-20°F
1100.242
Feit
15
980
2,700
8,000
6.2" x 3.5"
12
-27°F
1100.767
TCP
19
950
2,700
8,000
4.9" x 3.7"
24
-20°F
14 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Lighting
CFL Residential Fixtures
All of our fixtures have the following features and benefits:
• ENERGY STAR Listed
• GU24 Self Balasted
• No hum or buzz
Lighting Fixtures
White Ceiling Dome
Brushed Nickel Ceiling Dome
• Textured White Finish with Alabaster Glass
Brushed Nickel Vanity
• Brushed Nickel Finish with Alabaster Glass
• Brushed Nickel Finish with Alabaster Glass
Ordering Information
Wattage
Incandescent Equivalent
Dimensions
Bulb Quantity
60
7.5" x 5"
1
White Ceiling Dome
1420.8018
SATCO 60-2636
7 ½"
13
1420.8016
SATCO 60-2628
11"
26
100
11.375" x 4.875"
2
1420.8015
SATCO 60-2631
15"
39
120–140
15.25" x 6"
3
Brushed Nickel Ceiling Dome
1420.8035
SATCO 60-2633
7 ½"
13
60
7.5" x 5"
1
1420.8014
SATCO 60-2621
11"
26
100
11.375" x 4.875"
2
1420.8013
SATCO 60-2623
15"
39
120–140
15.25" x 6"
3
Brushed Nickel Vanity
1400.504
SATCO 60-3209 24"
39
120–140
24" x 7.625"
3
1400.505
SATCO 60-3211
30"
52
200–220
30" x 7.625"
4
Replacement
Quantity Needed
1000.919 13w GU24 T2 Spiral
1420.8018
1
OR
1420.8016
2
1420.8015
3
1420.8035
1
1420.8014
2
1420.8013
3
1400.504
3
1400.505
4
Replacement Lamp Guide
1000.9195 11w GU24 LED
1000.919
1000.9195
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 15
Whole House Ventilation
Whole-house ventilation systems provide controlled, uniform
ventilation throughout a house. These systems use
one or more fans and duct systems to exhaust
stale air and/or supply fresh air to the house.
Heat and Energy Recovery Ventilators
(HRVs and ERVs) are whole house
ventilation systems that can provide
a continuous stream of fresh
outside air while exhausting
stale indoor air. These
machines are the best
ventilation solution
available for comfort,
health and safety when
constructing or remodeling a
tight home. HRVs and ERVs are
low flow systems that are usually run
continuously whenever the house is
closed up.
In typical installations, fresh outside air is supplied to
bedrooms and home offices while indoor air is exhausted
from bathrooms, exercise rooms and kitchens.
ERVs transfer heat and humidity.
HRVs transfer heat only.
What HRVs and ERVs look like
Duct connections on the sides or top
Heat is transferred in the core
Fresh outside
air goes in
Stale inside
stale air
goes out
Stale air
sent outside
Fresh air
distributed
in the house
Super Compact Model — only 22" x 11" x 18"
with easy to use 4" duct ports
Larger Whole House Models measure
approx. 28" x 20" x 17" and use 6" duct ports
INFORMATION: Ventilate the people, not the house. Supply fresh air to bedrooms, home offices, dining rooms: Places where
people spend a lot of time. Exhaust air from bathrooms, exercise rooms, laundry rooms and hobby rooms; places where
moisture and odors are generated. Don't worry about large open areas that see little activity.
|
16 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Ventilation
Whole House Ventilation
The following installation tips start from the outside of the house and work to the inside duct
system, machine, controls and exhaust/supply ports:
1. Exterior hoods for exhaust and supply should be installed
at least 6' apart. One hood brings in fresh air, the other
exhausts stale air. Combination hoods with separate
streams are now available.
8. Exhaust stale air from bath rooms, kitchens, hobby and
exercise rooms: places that generate moisture and odors.
9. Low voltage Central Control should be located in the
main body of the house but not the kitchen area.
Make it easy for the occupant to see and operate.
2. S
hort, round duct runs are installed from the HRV/ERV to
the outside hoods. Best to insulate these short runs to
avoid condensation.
10.Low voltage boost switches get located in rooms where
exhaust ports are installed — bath rooms, hobby and
exercise rooms.
RV/ERVs are typically suspended from the basement
3. H
ceiling. A hanging kit comes with the machine. Heat/
humidity transfer happens in the core of the HRV/ERV.
Call EFI Wholesale for further information and guidance.
We want you to ventilate right!
4. 6" or 8" round rigid ducts should be used for trunk lines.
Information: All duct runs should be as
straight as possible. Use rigid duct with few
elbows. It is important to insulate any duct
traveling through un-conditioned spaces.
5. 4" branch lines are often used to travel through inside walls
and other framing.
6. Exhaust and Supply ports should be located on ceilings
or high on walls, as far into rooms as possible.
7. D
eliver fresh, filtered air to bedrooms, home offices,
finished basements: places where people
spend time.
7
7
8
6
5
9
8
10
4
3
TIP: Even if you are installing exhaust ports from
your HRV or ERV in bathrooms, we recommend
also using an exhaust fan for duty exhaust. The
HRV/ERV runs slowly and steadily and does a great
job providing fresh air and exhausting stale air. To
evacuate a bathroom quickly, your customer will
want to have the option of additional exhaust.
2
1
1
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 17
Venmar HRVs and ERVs
All Venmar HRVs and ERVs have the following features and benefits:
• Includes pressure taps and balancing dampers
Simplified installation
• Tight back draft dampers
Positive close when machine is off — no leakage
• Defrost Sensors — Time and Temperature
Protects the core from freezing
• Removable terminal block
Quick wall control connections
• 5 year warranty
K Series Heat and Energy Recovery Ventilators
• Small Compact Size, installs easily in tight spaces
• 4" ports, simple duct connections
• Lightweight — only 30 lbs., easy to handle and mount
• Both top and side ports available
TIP: These units are a perfect choice for small homes, apartments, family
rooms, finished basements, hobby rooms, or master bedroom suites.
E Series Heat and Energy Recovery Ventilator
• ECM motors
• Homeshield™ defrost system
• Integrated balancing dampers
• 4 speed range settings
• 6" metal top ports to simplify installation
• Energy Star® Qualified
TIP: The E Series units are ideal for homes up to 2,000 square feet and feature
ECM motors for long life and higher energy efficiency at low speeds.
Ordering Information
CFM @ .4" w.g.
Venmar K Series Heat Recovery Ventilators
Venmar AVS K7 HRV — 4" Top Ports
5506.027
Venmar AVS K8 HRV — 4" Top Ports
5506.028
Venmar AVS K8 HRV — 4" Side Ports
5506.029
Venmar AVS K10 HRV — 4" Top Ports
5506.033
Venmar AVS K10 HRV — 4" Side Ports
5506.034
|
Power
Dimensions W x H x D
35–70
46
16" x 19" x 16"
37–77
37
16" x 19" x 16"
37–77
37
20" x 17" x 16"
45–90
39
16" x 19" x 16"
45–90
39
20" x 17" x 16"
Venmar K Series Energy Recovery Ventilators
Venmar AVS K7 ERV — 4" Top Ports
5506.031
Venmar AVS K7 ERV — 4" Side Ports
5506.032
35–70
34
16" x 19" x 16"
35–70
34
20" x 17" x 16"
Venmar E Series Heat Recovery Ventilators
Venmar E Series HRV — 6" Top Ports
5506.025
40–157
24–32
24" x 25" x 15"
Venmar E Series Energy Recovery Ventilators
Venmar E Series ERV — 6" Top Ports
5506.026
40–140
26–37
24" x 25" x 15"
18 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Ventilation
Venmar Wall Controls
Altitude Auto — Premium Central Control
• Automatic and programmable control (keeps in memory all ventilation settings even
after a power failure)
• Digital display with backlight (blue or green)
• Day, hour and periods of the day displayed
• Dynamic display showing ventilation status (air exchange or recirculation),
and also inside and outside temperature
• Maintenance indicator
Deco-Touch — Simplified Central Control
• Allows the user to choose either the manual modes or the automatic mode (dehumidistat)
• 1” x 1” LCD display
• Digital display with blue backlighting
• Dynamic exchange and recirculation indicators
• Interior relative humidity displayed
• Maintenance indicator
Lite-Touch — Basic Central Control
The light indicator of this wall control shows clearly in which operating
mode the unit is.
This push-button control has three functions:
• Intermittent (low speed air exchange for 20 minutes, then off for 40 minutes)
• Min (low speed air exchange)
• Max (high speed air exchange)
• Not compatible with the E Series Ventilator
20/40/60 Minute Push Button
This timer allows the unit to turn on high speed during 20, 40 or 60 minutes
to expel rapidly indoor stale air. Within 2 seconds, press once for 20 minutes,
twice for 40 minutes or three times for a 60-minute activation. Press another
time to deactivate.
Ordering Information
Wall Controls
5506.125
5506.123
5506.121
5506.112
Altitude Auto Wall Control
Deco-Touch Wall Control — Min/Max/Intermittent/Dehumidistat
Lite-Touch Wall Control — Min/Max/Intermittent
20/40/60 Min Push Button — Boost
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 19
Panasonic Whisper Comfort ERV
Whisper Comfort ERV — Energy Recovery Ventilator
Whisper Comfort uses two 4" round ducts to exhaust stale air while providing fresh air. Using a capillary core, both heat and
humidity are transferred during the process of bringing in fresh air and exhausting stale air.
• Balanced and quiet ventilation
• One motor running two blower wheels
• Two settings available:
– 10 CFM continuous low with 20 CFM boost
• Two filters — one for each air stream
• Low profile grille design
– 20 CFM continuous low with 40 CFM boost
• 0.8 Sones on high speed, less than 0.3 on low
• Use standard switches to operate off/on and high/low
(switches not included)
• Capillary Exchange Core transfers both heat and humidity
• Frost protection — outside damper closes at low temperature to
prevent freeze up
– Above 32°F — Exhaust and supply fully open
– From 32°F to 20°F — Supply closes for 30 minutes, opens
for 1 hour
– Below 20°F — Supply closes for one hour and opens for
10 minutes
62.2 Continuous Ventilation Rate Requirement
Floor Area
# of Bedrooms
0–1
2–3
4–5
<1500
30
45
60
1501–3000
45
60
75
3001–4500
60
75
90
4501–6000
75
90
105
Tip: Perfect for use in master bedrooms, home offices, hobby
rooms. Can be mounted vertically on side wall if necessary.
Whisper Comfort Exterior Wall Cap
• Dual chamber for exhaust/supply
• One penetration
8.75"
8.25"
4"
4.5"
Ordering Information
CFM
Panasonic Whisper Quiet ERV
ERV FV-04VE1
10/20 or 20/40
5505.12
Sones
Power
Duct
0.8
23w max
2 x 4"
Whisper Comfort Wall Cap
5505.181 FV-WC04VE1 Dual Chamber — Includes Outside Cap
|
20 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Ventilation
Ventilation Information
ASHRAE 62.2 Ventilation Guideline
Definitions of Terms
ASHRAE (American Society of Heating, Refrigeration and Air
Conditioning Engineers) is an organization that develops
standards for the HVAC industry.
Energy Recovery Ventilator (ERV)
62.2 is a standard that has been set for ventilation and indoor air
quality for residential low-rise buildings. This applies to single
family homes and up to three story multi-family homes. 62.2 allows
for supply systems, exhaust systems and balanced systems to
achieve the standard.
If you are being asked to comply with the ASHRAE 62.2 Standard
for ventilation, it is important that you talk to your favorite training
organization or work with organizations like the Home Performance
Coalition, BPI or RESNET to receive guidance. These standards
have changed over the years and it is important to get the latest
information and training. For instance, one of the more recent
innovations to the 62.2 standard is the allowance of some amount
of natural infiltration to be taken in to consideration when
calculating the necessary ventilation rate.
Go to ashrae.org for the most current information and more
specific detail.
An ERV transfer both heat and humidity. Use an ERV in humid
climates where air conditioning is used extensively. During the
cooling season this system will bring in fresh air cooling it down while
transferring the incoming humidity to the outgoing stream. During
the winter months, the ERV will transfer heat and humidity to the
incoming stream helping to keep the home environment comfortable.
Heat Recovery Ventilator (HRV)
An HRV transfers heat only from the outgoing air stream to the
incoming air stream while condensing moisture in the core which
is drained through a condensate tube. Use an HRV in the cold
Northeast, Midwest and also in the dry Southwest.
HVI
The Home Ventilating Institute (HVI) is an independent testing
organization that certifies various specifications and characteristics
of ventilation equipment. All of the ventilation equipment that EFI
carries has been HVI certified. For more information, test results
and definitions go to hvi.org.
Sone
A sone is a unit of measure for loudness. HVI uses sone measures
to compare noise levels for ventilation equipment. As a real world
comparison, 1 sone is approximately equivalent to the sound level
of a quiet refrigerator in a quiet room. 3 sones is three times as
loud as 1 sone.
The most common, inexpensive bath fans that we have used for
decades are typically 5 to 7 sones. The quality fans that EFI sells
are often 1.5 sones or less.
There are no sone level ratings or comparisons for remote
mounted fans as a testing method has not been established to
compare the various installation variances.
Whole House Exhaust Fan
Exhaust ventilation systems work by depressurizing the home.
Balanced fan motors draw outside air into your home through
doors and windows while blowing indoor air up into the attic
where it leaves the house through ridge, soffit or gable vents.
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 21
Fantech Whole House
Ventilation Systems
Fantech HRV Flex 100H
pecially designed for small and multi-family buildings, townhouses
S
and apartments, the Flex HRV fits into tight spaces, closets and
maintenance rooms.
• Compact design for tight spaces — fits in a 24” closet space
• Powerful and quiet — boost capability to 150 CFM
• Lightweight and quick to install — weighs only 39 lbs.
• Easy to balance — taps for balancing are on the HRV ports
• Wiring made simple — low voltage wiring tap snaps in and out for
easy installation and hook up
Super Compact Heat Recovery Ventilators
Perfect Solution for homes under 1,500 square feet.
• 4” ducts – easy to install
• Single Speed Continuous — 70 CFM
• Super Compact Size — 22" x 11" x 18" — only 25 lbs.
• 40w electrical use
• Electrostatic filters included — washable
• 3' Power Cord
• Fully lined with 1" aluminum foil faced polystyrene foam
• Two EBM motors, balanced sealed and permanently lubricated
24 Hour Mechanical
Timer (not included)
TIP: Use these units to provide fresh
air for small spaces like finished
basements, master bedroom suites,
hobby rooms, home offices, or small
homes less than 1,500 square feet.
Ordering Information
Fantech HRV Flex 100H
HRV Flex 100H
5504.158 Fantech Super Compact Heat Recovery Ventilators
Compact HRV — 4" Side Ports
5504.152 SH 704
Compact HRV — 4" Top Ports
5504.154 VH 704
Compact HRV — 4" Top Ports 3 speed
5504.155 VHR 704
Compact ERV — 4" Side Ports
5504.153 SE 704N
CFM
Dimensions W x H x D
100 (150 on boost)
15.625" x 14.5" x 21.5"
70
22" x 11" x 18
70
22" x 11" x 18
70
22" x 11" x 18
70
22" x 11" x 18
24 Hour Mechanical Timer
120v — 15 Amp plug-in 24 Hour Timer
5010.16
|
22 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Ventilation
Fantech Whole House
Ventilation Systems
Whole House Heat and Energy Recovery Ventilators
HRVS and ERVS for larger homes — greater than 1,500 square feet.
• 6" ports for quiet operation
• Cross flow heat recovery core provides continuous fresh air
• Electrostatic filters included — washable
• 150w electrical use
• Automatic defrost activates when outdoor air is below 23°F
• “R” Series features an extra port to re-circulate interior air
• Three operational speeds for enhanced performance
• Control box on the outside for easy wiring
Stale inside
stale air
goes out
Fresh outside
air goes in
information: See page 16 and 17
for further detail about how these
machines operate and installation tips.
Ordering Information
CFM @ .4ESP L-M-H
Dimensions W x H x D
Fantech Whole House Heat and Energy Recovery Ventilators
For Homes Smaller Than 2000 Square Feet
HRV with 6" Side Ports
5504.01 5504.05 SHR 1504
HRV
63 – 100 – 153
28" x 16" x 17"
SHR 1505 R
HRV
63 – 100 – 153
28" x 17" x 17"
ERV
50 – 100 – 153
28" x 16" x 17"
ERV with 6" Side Ports
5504.1 SER 1504
For Homes Smaller Than 3000 Square Feet
HRV with 6" Side Ports
5504.02 5504.06 SHR 2004
HRV
60 – 115 – 200
32" x 20" x 17"
SHR 2005 R
HRV
60 – 115 – 200
32" x 20" x 17"
HRV
60 – 115 – 200
28" x 21" x 17"
HRV
60 – 115 – 200
28" x 21" x 17"
ERV
50 – 90 – 190
32" x 20" x 17"
65 – 120 – 235
50" x 22" x 17"
HRV with 6" Top Ports
5504.146 VHR 2004
5504.148 VHR 2005 R
ERV with 6" Side Ports
5504.11 SER 2004
For Homes Larger Than 3000 Square Feet
HRV with 6" Side Ports
5504.07 SHR 3005 R
HRV
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 23
Fantech Whole House
Ventilation Systems
Controls For Fantech HRVs and ERVs
Eco-Touch Central Control
Basic Central Control —
Humidity Activated
• Clean modern style and look
• Boosts to high speed when
humidity rises above set point
• Compatible with all Fantech HRVs and ERVs
• Easy to program separate day and
night settings
• Accurate to +/–5%
• Automatic and manual modes
20 Minute Boost Timer
• Humidity level can be set for both high and low
• Typically used in bathrooms for duty cycling
• Boost to high speed with just a touch
• 2 wires, low voltage
• Displays indoor temperature and relative humidity
• All settings maintained during power outages
20, 40, or 60 Minutes Boost Timer
• 3 wires low wattage
Air Exchanger
• Simple, efficient and economical ventilation
• Provides approximately 50 CFM of outside air exchange
• Three operating speeds, continuous at low or medium
• Includes on/off control with dehumidistat
• Washable filter is easy to reach
• 81w electrical use
Whole House HEPA Filtration System
• Tie into an existing duct system or create
an independent re-circulation loop
• 99.97% effective down to 0.3 microns
• Collects airborne particles and allergens
• Cleans the air in an average house once
each hour
• Circulation rate = 240 cubic feet per minute
• Pre-wired with 5' cord, 3 prong plug, 115 vac
• Includes a pre-filter for large particles and
a carbon filter for odors.
• Two duct ports 8" round
Ordering Information
Central Controls For Fantech HRVs AND ERVS
Boost Controls For Fantech HRVs and ERVs
5504.66
Fantech Eco-Touch Wall Control
5504.64 20 Minute Boost Timer
5504.51 Basic Dehumidistat with on/off — 4 wires
5504.641 20-40-60 Minute Boost Timer
5504.55 Basic Dehumidistat with NO on/off — 2 wires
Fantech Air Exchanger
AEV 1000 with Timer
5504.20 Fantech Whole House HEPA Filtration System
HEPA Filtration System
5501.02 CFM
Dimensions W x H x D
42 – 60 – 104
22" x 19" x 13"
240
20" x 16" x 10.5"
Replacement Filters
5501.022 5501.023 |
Pre-Filter and Carbon Filter
HEPA Filter Set
24 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Ventilation
HRV / ERV Accessories
HRV/ERV Intake and Exhaust Vent
HRV/ERV Intake Exhaust Vent has the following features and benefits:
• Only one penetration
Simplifies Installation
• Almost no cross-contamination
Dependable Air flow in and out
• Unique tandem transition
fits both 5" and 6" insulated flex duct
Hood Connector
Stale air sent outside
Stale air sent outside
Exhaust
Fresh outside air goes in
Fresh outside
air goes in
Outside Hood
Recommended Accessories
Traditional Ceiling Grille — 4" or 6"
Elbow — Plastic — 4"
Designer Ceiling Grille — 4"
Elbow — Galvanized — 4" or 6"
Outdoor Wall Mounted —
White Metal Hood for
Intake and Exhaust — 6"
Galvanized Mounting Collar
for Designer Grilles
Ordering Information
Dual Hood Installation Kit
5506.211
Tandem Exhaust Hood — 6"
Recommended Accessories
Traditional Style Grilles
Elbows
4" Adjustable Supply/Exhaust Grille
5540.01
6" Adjustable Supply/Exhaust Grille
5540.02
Designer Style Grilles
90° Plastic Elbow — Fits in a 2"x 4" Wall
4530.37
4" Galvanized Elbow
4530.38
6" Galvanized Elbow
4530.39
Wall Mounted Hood — Pair
4" Designer Exhaust Grille
5540.001
6" Designer Exhaust Grille
5540.003
Galvanized Mounting Collars for Designer Grilles
5540.04
5540.06
5501.445
6" White Metal Hood with Screen, 8" Tail
4" Mounting Collar
6" Mounting Collar
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 25
Panasonic Whisper Fans
All Panasonic fans have the following features and benefits:
• Energy STAR® listed (except heater fan)
• Built-in back draft damper
• HVI certified
• UL listed for tub/shower enclosure when used with GFCI branch
circuit wire
• Rated for continuous use
• 3 Year warranty
• Low-sone — super quiet operation
• 6 Year warranty on DC motors (Whisper Green Models)
• Low power use
Whisper Ceiling Series
Use this series for general exhaust in bathrooms or other
rooms. These are the classic Panasonic exhaust fans.
Available CFM Rates:
• Fan only units — 50, 80, 110, 150, 190, 290 and 380 CFM
• Fan / Light / Nightlight units — 80, 110 and 150 CFM
— Light units use 2 x 13w electronic compact fluorescents and
includes a 4w night light
Ordering Information
CFM
.1" w.g. .25" w.g.
Whisper Ceiling Fans — Fan Only
50
5505.611 FV 05VQ5
FV
08VQ5
80
5505.621
110
5505.631 FV 11VQ5
150
5505.641 FV 15VQ5
FV 20VQ3
190
5505.05
FV
30VQ3
290
5505.055
380
5505.066 FV 40VQ4
Sones
.1" w.g.
.25" w.g.
Power
.1" w.g.
.25" w.g.
Duct
36
<0.3
0.5
11
11.5
Dual 4" or 6" Round
62
<0.3
0.4
14.7
14.5
Dual 4" or 6" Round
91
<0.3
0.5
21.1
20.7
Dual 4" or 6" Round
127
<0.3
0.5
28.4
27.3
6" Round
144
0.8
1.4
42
42
6" Round
257
2
N/A
64
62
6" Round
348
3
N/A
112
111
6" Round
Whisper Ceiling Fans — Fan / Light / Nightlight
|
5505.082
FV 08VQL6
80
62
<0.3
0.4
14.9
14.7
Dual 4" or 6" Round
5505.6811
FV 11VQL6
110
90
0.5
0.6
23.4
23
Dual 4" or 6" Round
5505.6911 FV 15VQL6
150
128
0.9
1
31.8
30.9
6" Round
26 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Ventilation
Panasonic Whisper Fans
Whisper Green Select Series
Panasonic’s WhisperGreen Select is a customizable, all-in-one fan and fan/LED light
combination for your IAQ solution. The new Pick-A-Flow technology gives you the ability
to select your required air flow with just the flip of a switch.
• Pick-A-Flow speed selector – one fan, you choose the CFM
• Plug ’N Play modules provide up to three value added features
• SmartFlow™ technology overcomes duct resistance and maintains CFM rate
• LED light engine provides long life – 40,000 hours, no maintenance
• Flex-Z Fast™ bracket provides flexible, fast and easy installation
Whisper Green Select Plug N' Play Modules
Multi-Speed
Motion Sensor
Condensation
Sensor
NiteGlo LED
night light
INFORMATION: For wiring help visit http://ow.ly/D1KUc or search “WhisperGreen Select” on youtube.com
Ordering Information
Continuous
Run CFM
CFM
.1" w.g.
.25" w.g.
Sones
.1" w.g.
.25" w.g.
Power
.1" w.g.
.25" w.g.
Duct
WhisperGreen Select with Built in Multi-Speed (Runs continuously at low speed)
Fan Only
5505.401
FV-05-11VKS1
30 – 110
50 – 80 – 110
53-82-113
<0.3
0.4
2.5 – 9.8
5.0 – 16.1
4"
FV-05-11VKSL1
30 – 110
50 – 80 – 110
53-86-114
<0.3 – 0.4
0.4
2.5 – 11.1
5.0 – 18
4"
Fan Light
5505.404 WhisperGreen Select Pick-A-Flow
Fan Only
5505.402
FV-05-11VK1
50 – 80 – 110
53-82-113
<0.3
0.4
3.5 –9.8
7 – 16.1
4"
5505.403
FV-11-15VK1
110 – 130 – 150
111-131-143
<0.3
0.5
7.0 – 13
13.5 – 22
6"
5505.405
FV-05-11VKL1
50 – 80 – 110
53-86-114
<0.3 – 0.4
0.6
4.0 – 11.1
7 – 18
4"
5505.406
FV-11-15VKL1
110 – 130 – 150
111-131-143
<0.3 – 0.4
0.8
8.5 – 16.5
16 – 24
6"
Fan Light
Plug N’ Play Modules
FV-VS15VK1
5505.407
FV-MSVK1
5505.408
FV-CSVK1
5505.409
FV-NLVK1
5505.501
Multi-Speed (Already built into Models .401 and .404)
Motion Sensor
Condensation Sensor
NiteGlo™ 1w LED Night Light
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 27
Panasonic Whisper Fans
Whisper Sense Series — Built in Motion + Humidity Sensors
Use this series for situations where dual sensing is desired —
both motion and humidity. Meets CalGreen standards.
• Built in motion sensor and humidity sensor. Factory set at 50% RH,
adjustable from 30–80% RH.
• Delay off timer up to 60 minutes after motion ceases or
humidity level is achieved
• In delay off mode, humidity sensor takes precedence assuring that
moisture will be taken care of
• No switches needed — motion and humidity sensors built in
Available CFM Rates:
• Fan only units and Fan / Light / Nightlight units — 80 and 110 CFM
Built-in
Motion Sensor
— Light units use 2 x 13w electronic compact fluorescents and
(Humidity sensor located under grille)
includes a 4w night light
Whisper Warm Series
Use this series for clients that desire a heater fan in their bathroom
• 1,400 watt heater element
• Recirculates and heats air while exhausting
Available CFM Rates:
• Fan only units and Fan / Light / Nightlight units — 110 CFM
Switch Suggestion:
• Wire heater unit on a separate 20 amp GCFI circuit
Ordering Information
CFM
.1" w.g. .25" w.g.
Sones
.1" w.g.
.25" w.g.
Whisper Sense Fans — Fan Only — Built in Motion + Humidity Sensors
FV 08VQC5
80
59
<0.3
<0.3
5505.674
FV 11VQC5
110
91
0.3
0.5
5505.675
Whisper Sense Fans — Fan / Light / Nightlight
80
62
5505.6761 FV 08VQCL6
110
89
5505.6771 FV 11VQCL6
Power
.1" w.g.
.25" w.g.
Duct
15.8
15.6
Dual 4" or 6" Round
24.3
24.2
Dual 4" or 6" Round
<0.3
0.4
17.5
17.6
Dual 4" or 6" Round
0.7
0.7
26
25.7
Dual 4" or 6" Round
0.6
1.1
30.7
30.5
4" Round
0.7
1.0
30.6
30.5
4" Round
Whisper Warm Fan — Fan Only
5505.111
FV 11VH2
110
89
Whisper Warm Fan — Fan / Light / Nightlight
5505.112
|
FV 11VHL2
110
89
28 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Ventilation
Panasonic Whisper Fans
Whisper Fit Series
Use this series for remodeling when installing a fan between floors
or when you need a shorter housing.
• 5 5/8" deep housing
• Fits in 2 x 6 framing
• Can be used with existing 3" duct or with 4" duct. Adaptor is included.
We recommend updating the duct whenever possible.
• 32w CFL — 100w equivalent
TIP: Use these fans when remodeling and installing a
fan between floors. These housings fit in 2 x 6 framing
and come with a 4" to 3" adaptor in case you need to
use the old ductwork. Replace or update the ductwork
if you can.
Available CFM Rates:
• Fan only units and Fan / Light / Nightlight units — 50, 80 and 110 CFM
— Light units use 2 x 13w electronic compact fluorescents and
includes a 4w night light
Whisper Value Series
Use this series in production situations where price may be a challenge
• 3 3/4" deep housing
• Fits in 2 x 4 framing
• Can be mounted vertically on side wall
Available CFM Rates:
• Fan only Units and Fan / Light / Nightlight units — 80 and 100 CFM
— Light units use 2 x 13w electronic compact fluorescents and
includes a 4w night light
Ordering Information
CFM
.1" w.g.
.25" w.g.
Sones
.1" w.g.
.25" w.g.
.1" w.g.
Power
.25" w.g.
Duct
Whisper Fit Fans — Fan Only
5505.82
FV 08VF2
80
60
0.8
1.0
24.5
24.3
4" Round (Includes 4" to 3" Reducer)
5505.83
FV 11VF2
110
94
1.5
1.5
33.6
33.2
4" Round (Includes 4" to 3" Reducer)
Whisper Fit Fans — Fan / Light / Nightlight
5505.8511
FV 05VFL3
50
35
<0.3
0.4
15.9
15.8
4" Round (Includes 4" to 3" Reducer)
5505.8611
FV 08VFL3
80
67
0.5
0.8
28.8
28.6
4" Round (Includes 4" to 3" Reducer)
5505.872
FV 11VFL3
110
96
1.3
1.5
33.6
32.6
4" Round (Includes 4" to 3" Reducer)
Whisper Value Fans — Fan Only
5505.1611
FV 05VS3
50
37
0.4
1.0
15.8
15.3
4" Oval
5505.1621
FV 08VS3
80
65
1.3
1.5
23.3
23.6
4" Oval
5505.1641
FV 10VS3
100
90
1.5
1.5
36.4
36.1
4" Oval
Whisper Value Fans — Fan / Light / Nightlight
5505.1631
FV 08VSL3
80
67
1.3
N/A
24.4
24.9
4" Oval
5505.1651
FV 10VSL3
100
67
1.5
N/A
36.6
36.3
4" Oval
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 29
Panasonic Whisper Fans
Whisper Wall Fan
Use this series for bathrooms with cathedral ceilings
• Can be adjusted for up to 10"
wall thickness
• 8" round through wall duct
• Includes white exterior metal hood
with flapper
Available CFM Rates:
• One model only — 70 CFM
Whisper Recessed Fan
Use this fan in rooms where recessed cans are being used and there is a
need for ventilation.
• Built-in back draft damper
• Adjustable trim ring and light socket to accommodate finish surface
• 7 1/2" deep housing
• Dual 4" or 6" duct adapter
• UL listed for tub/shower enclosure when used with a GFCI branch circuit
• IC rated
• LED and CFL versions are available
• LED version includes one 14w Energy Star LED bulb, 575 lumens, 3,000° K, 25,000 hour rated life
• CFL version includes one 18w Energy Star CFL bulb, 1380 lumens, 2,700° K, 10,000 hour rated life
Available CFM Rates:
14w GU24
FV-08VRE1
LED
• One model only — 80 CFM
18w GU24
FV-08VRL1
CFL
Ordering Information
CFM — .03" w.g.
Sones — .03" w.g.
Power — .03" w.g.
Duct
70
1.1
18
8" Diameter
CFM
.1" w.g. .25" w.g.
Sones
.1" w.g.
.25" w.g.
Power
.1" w.g.
.25" w.g.
Duct
Whisper Wall Fan
5505.25
FV 08WQ1
Whisper Recessed
CFL Light Source
5505.169
FV-08VRL1
80
66
0.8
0.7
20.5
19.5
Dual 4" or 6" Round
80
66
0.8
0.7
20.5
19.5
Dual 4" or 6" Round
LED Light Source
5505.1691 FV-08VRE1
|
30 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Ventilation
Ceiling Fan Installation Tips
Ceiling Surface Mounted Fans
• Use for single point or spot ventilation
Best Practice
Not ideal
• Use timers or speed controls for continuous
or intermittent whole house ventilation
• Only use rigid duct
• Avoid bends and elbows
• Keep it short
• Tilt duct to the outside for
condensation control
• Seal all seams
Exhaust through a wall to avoid bends
Ductwork Tips and Techniques
• Use rigid duct whenever possible for better air flow
• Avoid using flex duct, but if you do, support it with strapping
to avoid dips
• Use a short piece of flex duct at the fan or HRV connection to
break vibration noise in the duct
• Seal all joints, seams and connections with mastic.
See page 64 for our mastic products. Use duct tape
for anything except ducts.
• Run ducts in inside walls if possible. Make duct runs
continuous. Wall cavities are NOT ducts.
• Run duct all the way to the outside of the building. Attics,
basements and crawl spaces are NOT outside the building.
• Insulate any ducts in un-conditioned spaces to avoid
condensation and energy loss
• Think in straight lines —­ avoid as many elbows as possible
• Shorter runs perform better — locate ventilation equipment
to achieve short duct runs and good performance
• Two 45° elbows allow better airflow than one 90°
• Expanding the duct from 4" to 6" promotes better air flow
and reduces noise
Simple Fan Sizing Tip for a Single Room:
• With +/–8’ ceilings and less than 15 equivalent feet of duct, multiply the square footage of the room by 1.10 and install the
next size available.
Example:
80 square foot bathroom x 1.10 = 88 square feet, so look for a 90 or 100 CFM fan. If the ceiling is higher or vaulted, or the
ductwork is longer, increase your selection by one size.
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 31
Delta Breez Bath Fans
All Delta Breez fans have the following features and benefits:
• Energy STAR® listed
• DC motor — long life and efficient
• All light units use a 4w nightlight
• CFL models include a 26W bulb;
1650 lumens
• LED models include a 13w bulb;
800 lumens
• HVI certified
• cUL listed for tub/shower enclosure when
used with GFCI branch circuit wire
• Rated for continuous use
• 3 year warranty
• Low-sone — super quiet operation
Delta Breez Signature Series
Use this series for general exhaust in bathrooms or other rooms.
Sleek design, quiet exhaust.
Available CFM Rates:
• Fan only units — 80 and 110 CFM
• Fan / CFL Light / Nightlight units — 80 and 110 CFM
• Fan / LED Light — 110 CFM
Delta Breez Green Builder Series
Use this series for both retrofit and new construction. Smaller housing
and grille for easier installation. Lowest sone rating available.
Available CFM Rates:
• Fan only units — 50, 80, and 100 CFM
• Fan / Light unit— 50, 80, and 100 CFM
• Fan with LED light — 80 CFM
Delta Breez Slim Series
Use this Slim Series for installing between existing floors — the housing is
4" deep, with a 3" duct for easy retrofit. Also suitable for multifamily and
production homes.
Available CFM Rates:
• Fan only units — 50 and 70 CFM
|
• Low power use
32 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Ventilation
Delta Breez Bath Fans
Ordering Information
CFM
.1" w.g. .25" w.g.
Delta Breez Signature Series Fan Only
SIG80
80
65
5508.11
110
96
5508.321 SIG110
Sones
.1" w.g.
.25" w.g.
.1" w.g.
Power
.25" w.g.
Duct
<0.3
0.5
8.2
10.8
4" Round
<0.3
1.2
12.7
15.6
4" Round
Delta Breez Signature — Fan / Light / Nightlight
5508.311 SIG80L
80
49
0.6
1
9.6
10
4" Round
5508.322
110
89
1.1
1.4
15.4
17.2
4" Round
110
94
0.5
0.8
13.1
15.3
4" Round
SIG110L
Delta Breez Signature — Fan / LED
5508.323
SIG110LED
Delta Breez Green Builder
5508.45
GBR50
50
36
<0.3
1
4
5.2
4" Round
5508.46
GBR80
80
66
0.8
1.1
7.9
9.3
4" Round
5508.49
GBR100
100
81
1.4
1.3
12.6
11.6
4" Round
Delta Breez Green Builder — Fan Light
5508.47
GBR50L
50
38
<0.3
0.7
4.3
5.8
4" Round
5508.48
GBR80L
80
66
0.8
1
8.7
9.7
4" Round
5508.491
GBR100L
100
76
1.4
1.3
13.9
11.9
4" Round
Delta Breez Green Builder —Fan / LED
5508.441
GBR80LED
80
63
0.8
1.1
11.6
11.1
4" Round
Delta BreezSlim
5508.41
SLM50
50
36
1
1.2
6.4
6.3
3" Round
5508.42
SLM70
70
54
2
1.5
13.1
11.5
3" Round
Simple Fan Sizing Tip for a Single Room:
• With +/–8’ ceilings and less than 15 equivalent feet of duct, multiply the square footage of the room by 1.10 and install the
next size available.
Example:
80 square foot bathroom x 1.10 = 88 square feet, so look for a 90 or 100 CFM fan. If the ceiling is higher or vaulted, or the
ductwork is longer, increase your selection by one size.
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 33
Broan Quiet Exhaust Fans
All Broans fans have the following features and benefits:
• Energy STAR® listed
• Low-sone — Super quiet operation
• HVI certified
• Low power use
• Rated for continuous use
• Ultra Quick Mounting bracket
• UL listed for tub/shower enclosure when
used with GFCI branch circuit wire
Broan ULTRA Z Series
• DC motor — highly efficient
• Maintains CFM rate over duct runs
• Meet continuous ventilation requirements
• Includes a 6” to 4” reducer
• Continuous low speed run w/full speed boost
• Light provided by 2 —
18w GU24 CFLs, 3,500 K
• Set the low speed and set the delay off
for high speed
• 4w Nightlight
Broan ULTRA X Series
• DC motor — highly efficient
• Single speed — rated for continuous use
• Light provided by 2 —
18w GU24 CFLs, 3,500 K
• 4w Nightlight
• Maintains CFM rate over duct runs
• Includes a 6” to 4” reducer
(80 CFM fan only)
Ordering Information
CFM .1" w.g.
Sones
Power
Duct
Broan Ultra Z Series Dual Speed
Dual Speed — Fan Only
5507.312
Z Series
80
<0.3
5.8
6
5507.313
Z Series
110
<0.3
7.7
6
Dual Speed — Fan / Light
5507.314
Z Series
80
<0.3
6
6
5507.315
Z Series
110
<0.3
8.7
6
<0.3
7.7
6
<0.3
8.7
6
Dual Speed — Fan / Humidity Sensing
5507.333
Z Series
110
Dual Speed — Fan / Humidity Sensing / Light
5507.334
Z Series
110
Broan Ultra X Series Single Speed
Single Speed — Fan Only
5507.317
X Series
80
<0.3
5.8
6
5507.318
X Series
110
<0.3
7.7
6
Single Speed — Fan / Light
|
5507.321
X Series
80
<0.3
6
6
5507.322
X Series
110
<0.3
8.7
6
34 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Ventilation
Fantech and Tamarack
Dryer Boost Kit
• Use with dryers that have duct runs between 30' – 130' equivalent length
• Mount at least 15' from the dryer
• Senses pressure and runs in 10 minute cycles when the drier is on
• DBF-4XL — Galvanized housing, pressure switch attached,
3 prong plug attached, insert pressure tube in the duct
• DBF-110 — Thermoplastic housing, pressure switch attached
with tube installed in the fan collar, bring power to the fan
junction box — no plug
• 4" duct, 150 CFM, 83w
Manufactured Housing Drop in Bath Fan Replacement — 7"
• Designed specifically for manufactured homes
• Direct replacement for 7" roof mounted exhaust fan
• Easy installation from the interior
• Quiet and weather sealed
• Includes a new interior grille – uses existing roof cap
• Quiet — 3.0 sones
• Rated for continuous operation
• Durable back draft damper keeps cold air from
coming in when not in use
• Optional switch available for timed ventilation
• 5 year product warranty
Ordering Information
Dryer Boost Kit
5501.391
DBF-4XL
Fantech Galvanized Dryer Boost with Pressure Switch — 150 CFM
5501.39
DBF-110
Fantech Plastic Dryer Boost with Pressure Switch — 150 CFM
5501.71
DB-10
Pressure Switch Only
CFM
Power
Duct
16.5w
7"
Tamarack Mainstream Manufactured Housing Bath Fan Replacement
5502.10
65
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 35
Remote Fan Usage Ideas
In-line, Roof Mounted, Outdoor Wall Mounted Tips
• Can be used to ventilate single point or multiple points
• Can be used to circulate heat or AC for overall balance
• Can be used for range hoods — taking much of the noise
out of the kitchen
• Can be used for sub-slab or crawl space ventilation
• Can be used to boost dryers with long runs
• Use timers or speed controls for continuous or intermittent
whole house ventilation
Exhaust up and out with
an in-line fan
Exhaust down and
out with an
in-line fan
Dryer Boost
Single or Two-point Exhaust
|
36 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Range Hood Exhaust
Sub Slab or Crawl Space Ventilation
Ventilation
Fantech Range Hood Liners
Information: When installing the Fantech Custom Range Hood Liner, the typical application will include the liner, a duct
silencer and a remote mounted fan.
Range Hood Liners For Use With Custom Range Hoods
By using a remote exhaust fan with a hood liner, most
of the exhaust noise is removed from the kitchen.
Exhaust Hood
• Pre-wired for use with remote in-line or exterior fans
Steam and odors exhausted
through roof vent
• Dimmable halogen lights included
• Variable speed control included
• Removable and washable aluminum filters
In-Line Fan
Stainless Steel and Galvanized Range Hood Liners
Silencer
• Stainless steel face with galvanized steel housing
Duct
• Available in 30" and 36" widths
Hood Liner
INFORMATION: 42" and 48" liners are
available as special order.
Recommended Fans and Duct Silencers
RE — Roof Mounted
See Page 39
RVF — Wall Mounted
See Page 39
FG — In-line
See Page 38
Duct Silencer
See Page 46
Backdraft Damper
See Page 44
Ordering Information
WxHxD
Duct
# Filters
Replacement Filters
Range Hood Liners for Use with Custom Range Hoods — Stainless Steel and Galvanized
5501.752 30" SGHL
28.5" x 4" x 18"
6"
2
5501.755
5501.753 36" SGHL
34.5" x 4" x 18"
8"
2
5501.756
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 37
Fantech Ventilation Fans
TIP: Remote mounted fans can exhaust bathrooms, laundry rooms, basements and crawl spaces. One remote mounted fan can
exhaust from multiple points in large rooms or from separate rooms. They can be used for dryer boosting, kitchen range hoods
or for re-circulating heat or AC within a building.
FR and FG In-Line Fans
• Can be installed vertically or horizontally
• FR series has an airtight thermoplastic housing
• FG series has an airtight galvanize steel housing
• UL Listed for outdoor use and wet locations
• Backdraft damper sold separately
FG Series
Available CFM Rates:
• From 100 to 680
• Duct sizes from 4" to 12"
FR Series
Ordering Information
CFM
Power
Duct
FR 100
110
21.5
4"
5501.101 FR 110
150
80
4"
5501.11 FR 125
120
18
5"
5501.110 FR 140
190
61
6"
5501.12 FR 150
230
71
6"
5501.13 FR 160
260
129
6"
5501.15 FR 200
360
122
8"
5501.16 FR 225
400
137
8"
5501.17 FR 250
600
241
10"
5501.301 FG 4
110
20
4"
5501.302 FG 4XL
150
71
4"
5501.303 FG 5
130
20
5"
5501.304 FG 5XL
190
73
5"
5501.305 FG 6
270
72
6"
5501.306 FG 6XL
450
153
6"
5501.307 FG 8
410
119
8"
5501.308 FG 8XL
470
142
8"
5501.309 FG 10
480
138
10"
5501.312 FG 12
680
181
12"
FR Series In-line Fan
5501.10 FG Series In-line Fan
|
38 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Ventilation
Fantech Ventilation Fans
RE and REC Series Roof-Mounted Exhaust Fans
• Available to fit both pitched roofs and flat roofs
• Permanently lubricated sealed ball bearings
• 100% speed controllable
• RE fans have a flat base
• REC fans have a 1/2" depth box designed to be installed on
a roof curb
• REC fans are available as a special order only
• Backdraft damper sold separately
RVF Series Exterior Wall-Mounted Exhaust Fans
• Rugged construction for exterior use
• External rotor motor with built in thermal protection
• 100% speed controllable
• Can be painted to match exterior
• Backdraft damper sold separately
Ordering Information
CFM
Power
Duct
RE Series Roof-mounted Exhaust Fans
5501.47 RE 6
199
87
6"
5501.49 RE 8XL
356
148
8"
5501.50 RE 10XL
721
394
10"
RVF Series Exterior Wall-mounted Exhaust Fans
5501.60 RVF 4
98
19
4"
5501.61 RVF 4XL
172
92
4"
5501.62 RVF 6
204
92
6"
5501.63 RVF 6XL
346
149
6"
5501.64 RVF 8XL
392
151
8"
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 39
Fantech Premium Bath Fans
All Fantech fans have the following features and benefits:
• HVI certified
• Low power use
• Speed controllable
• UL “Wet Location” Rating
• Rated for continuous use
• IC “Insulation Contact” Rating
• Low-sone — super quiet operation
• 7 year warranty
Single Point Exhaust Fans
• Two versions — interior in-line or exterior wall mount
• Perfect for small baths and powder rooms
• Attractive low profile grille — light versions available
• Direct vent to the outside to save space in condos and apartments
• All fans Include fan motor with ceiling grille, housing, and back
draft damper
In-line Exhaust Fan
Exterior Wall Mount Fan
Ordering Information
CFM
Fan Duct
Housing Duct
Grille
Vent Only
Single Point Exhaust Fans — In-line Exhaust Fans
5501.914 PB-110-V
110
4"
4"
5501.915 PB-110-F
110
4"
4"
14w Fluorescent
5501.916 PB-110-H
110
4"
4"
50w Dimmable Halogen
5501.922 PB-190-V
190
6"
6"
Vent Only
Single Point Exhaust Fans — Exterior Wall Mount Fans
|
5501.917 PBW-110-V
110
4"
4"
Vent Only
5501.918 PBW-110-F
110
4"
4"
14w Fluorescent
5501.919 PBW-110-H
110
4"
4"
50w Dimmable Halogen
40 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Ventilation
Fantech Premium Bath Fans
2 Point Exhaust Fans — Includes “Y” Pipe
• Kits include 2 low profile grilles — light versions available
• Use for larger bathrooms
• Locate vents directly over moisture source
• Includes fan motor, 2 ceiling grilles, housings,
back draft dampers, and “Y” Pipe
Ceiling Grille Units With Housing and Back Draft Damper
Use this if you need more than two ventilation points in a large bath.
• Includes housing with lamps, hanger bars and back draft damper
• Three styles available
50w Dimmable
Halogen Light
Vent Only — No Light
14w Fluorescent Light
Ordering Information
CFM
Fan Duct
Housing Duct
Grille
2 Point Exhaust Fans — In-line Exhaust Fans
5501.931 PB-150-V2
150
4"
4"
Two Vent Only
5501.932 PB-150-F2
150
4"
4"
Two 14w Fluorescent
5501.933 PB-150-H2
150
4"
4"
Two 50 Dimmable Halogen
5501.936 PB-270-V2
270
6"
4"
Two Vent Only
5501.938 PB-270-F2
270
6"
4"
Two 14w Fluorescent
5501.939 PB-270-H2
270
6"
4"
Two 50w Dimmable Halogen
5501.935 PB-370-V2
370
6"
6"
Two Vent Only
5501.941 PB-270-F-V
270
6"
4"
One 14w Fluorescent One Vent Only
Description
Grille
Ceiling Grille Units with Housing and Back Draft Damper
5501.911 PB-V4
6" Ceiling Grille with 4" Discharge
5501.912 PB-F4
6" Ceiling Grille with 4" Discharge
14w Fluorescent
5501.913 PB-H4
6" Ceiling Grille with 4" Discharge
50w Dimmable Halogen
5501.921 PB-V6
6" Ceiling Grille with 6" Discharge
Vent Only
Vent Only
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 41
Radon Control Fans
Information: EFI makes no claim that using these products will solve a radon problem and as a result, EFI is not liable for
any damages or claims which may arise from the use of these products. It is incumbent on the installer to follow all applicable
federal, state and local codes associated with radon control. We recommend testing for radon both before and after installing
radon control products and consulting with the EPA and local health departments for guidance.
Fantech Low Profile Radon Fan
• Exterior mount — easy pipe connections
• Low Profile wall mount design
• Constructed from durable, UV resistant polycarbonate
• Factory sealed, no leak design
Low Profile Radon Fan
• Integral condensate bypass
5-1/16
(129)
13-7/16
(341)
• Direct wall-mount with integral vibration isolation
• High efficiency, continuous duty EBM-Papst motor
15-7/8
(404)
• Built-in thermal overload protection
17-3/4
(451)
• Use 4" schedule 20 or 40 PVC
• Unit is UL Listed for wet locations
• 5 year warranty
14-15/16
(380)
7-3/16
(182)
Fantech In-line Radon Fans
HP Series fans are designed for high pressure capability required for radon mitigation.
Fan Housing:
Fan Motor:
• UV resistant, UL listed for
commercial applications
• High efficiency EBM motorized impeller
• Automatic re-set thermal
overload protection
• Factory sealed to prevent leakage
• Average life expectancy of
7– 10 years continuous
• Watertight electrical box
• Approved for wet location mounting
D
E
• Five year full factory warranty
Ordering Information
CFM*
Watts
Duct
70 – 140
94
4"
Fantech Low Profile Radon Fan
5501.83 HP190SL
Fantech In-line Radon Fan
5501.81 HP 2190
15 – 80
60 – 85
4"
5501.82 HP 220
100 – 190
85 – 190
6"
*CFM measured approx. 1" to 1.75" of Static Pressure
|
42 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Ventilation
Radon Control Accessories
Radon Control Products
Couplings for attaching to PVC
Sump cover
• For HP2190 Radon Fan
• 21" Round cover
Radon Test Kit
Mini U-Tube
• Complete kit with instructions
• Used to measure differential pressures
• Accurately test a home or workplace
• Easy installation, accurate readout
• Run test for 2–3 days, then use the enclosed self addressed
envelope to send the sample to a lab. Results sent back by
the lab.
• Comes with 0.75 oz. red gauge oil, pair of carrying plugs, pair of
tube connectors and instructions
Air Sealing Foam
PVC Stack Pipe Tops
• Use to seal cracks and holes
• Fast and economical low air restriction through the
1/2" stainless steel mesh
Radon Test Kit
• One time use 12 oz. can
Coupling
Sump Cover
Exhaust Cap
Mini U-Tube
Varmint Guard
12 oz. Foam
Ordering Information
Radon Control Products
Radon Control Products
5020.3
Radon Test Kit
Caps for use with Schedule 40 PVC
5510.191
156-44 Coupling for HP 2190 with 4" PVC
5510.206
Varmint Guard — 3" Schd 40 PVC
5510.192
156-43 Coupling for HP 2190 with 3" PVC
5510.207
Varmint Guard — 4" Schd 40 PVC
5510.193
156-64 Coupling for HP 220 with 4" PVC
5510.205
Exhaust Cap — 4" Schd 40 PVC
5510.194
156-63 Coupling for HP 220 with 3" PVC
Caps for use with Schedule 20 PVC
5510.201
Varmint Guard — 3" Schd 20 PVC
5510.202
Varmint Guard — 4" Schd 20 PVC
5510.203
Exhaust Cap — 4" Schd 20 PVC
3040.9
Sump Pump Cover
5510.302
Dwyer Manometer U-Tube
3530.215
Todol 12 oz. Foam
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 43
Ventilation Accessories
Exhaust/Supply Grilles and Collars
Traditional Style
Designer Style
• Adjustable, use for both exhaust
and supply
• Diffuses air across ceiling or wall
Galvanized Mounting Collars
• Low profile, not adjustable
• Nailing flange attaches to ceiling joist
• Matches Fantech grille-light unit
• Serves as an anchor to attach duct work
and pressure fit grilles
• Use with glavanized mounting collar
• No need for metal mounting collars
• Can be use with both plaster/sheetrock
and drop ceilings
Traditional — 4"
Traditional — 6"
Designer — 4" or 6"
Galvanized Mounting Collar — 4" or 6"
Backdraft Dampers
Backdraft Dampers stop outside air from coming in the
building when the fan is turned off.
Low Resistance Model
• Use with Panasonic fans if running 2 fans to one outlet
• Cloth sleeve damper causes very little resistance to air flow
Spring Loaded Model
Low Resistance Model
ASTM E-84 Rated
4" or 6"
• Light duty spring with gasket seal
Spring Loaded Model
4" to 12"
Ordering Information
Exhaust/Supply Grilles and Collars
Backdraft Damper
Traditional Style
For Fantech Fans
5540.01
5540.02
Designer Style
4" Adjustable Supply/Exhaust Grille
6" Adjustable Supply/Exhaust Grille
4" Designer Exhaust Grille
5540.001
6" Designer Exhaust Grille
5540.003
Galvanized Mounting Collars
5540.04
5540.06
|
4" Mounting Collar
6" Mounting Collar
4" Backdraft Damper
5540.08
5" Backdraft Damper
5540.09
6" Backdraft Damper
5540.1
8" Backdraft Damper
5540.12
10" Backdraft Damper
5540.13
12" Backdraft Damper
5540.14
For Panasonic Fans
5540.075
5540.076
44 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
4" Cape Style Backdraft Damper
6" Cape Style Backdraft Damper
Ventilation
Ventilation Accessories
Flex Duct, Clamps, Straps
Insulated flex duct may be used in certain circumstances,
however we suggest using rigid ducts whenever possible.
Potential dangers include the possibility of dips, sags and
bends in the flex duct that can diminish performance of
the system.
• Use only in short runs
• Use 6–8" pieces to break vibration between fans
and rigid ducts
Insulated Flex Duct
• Insulated flex duct R-value = 4.2
Zip Ties
Clamps
Metal Flex Duct
In-Line Fan and Duct Mounting Clamps
• Used to attach metal ductwork to Fantech fans
• Rubber lining to break vibration
• 4" through 12" available
Ordering Information
Insulated Flex Duct
In-Line Fan and Duct Mounting Clamps
4" x 25' Insulated Flex Duct
4530.01
6" x 25' Insulated Flex Duct
4530.03
8" x 25' Insulated Flex Duct
4530.05
Semi-Rigid Metal Flex Duct
5510.40
5510.41
5510.42
5510.43
5510.44
5510.45
4" x 8' Semi-Rigid Metal Flex Duct
4531.1
4" x 10' Semi-Rigid Metal Flex Duct
4531.14
Duct Clamps and Ties
4530.50
4531.12
4" Mounting Clamps (Pair)
5" Mounting Clamps (Pair)
6" Mounting Clamps (Pair)
8" Mounting Clamps (Pair)
10" Mounting Clamps (Pair)
12" Mounting Clamps (Pair)
36" Zip Ties, bundle of 50
4" Clamp
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 45
Ventilation Accessories
Ductwork Components
“Y” Connectors
Elbows
• Used when air is drawn from two different locations in the same
or different rooms
Reducers/Increasers
• Allow round ductwork to be increased or decreased
• Plastic elbow can transition 4" oval to 4" round
• Galvanized elbow can be angled at 45° and 90°
Duct Silencers
• Used to reduce noise in rigid ducts — acts as a muffler
• Mount in any orientation
"Y" Connectors
Elbows
Reducers/Increasers
Duct Silencers
Ordering Information
|
Ductwork Components
Ductwork Components
“Y” Connectors
Reducers/Increasers
4530.30
4530.31
4530.33
4530.32
4530.321
Elbows
4" x 4" x 4" Y Duct
4530.37
4530.38
4530.39
90° Plastic Elbow
6" x 6" x 6" Y Duct
6" x 4" x 4" Y Duct
8" x 8" x 8" Y Duct
8" x 6" x 6" Y Duct
4" Galvanized Elbow
6" Galvanized Elbow
4530.36
4530.35
4530.34
4530.402
Duct Silencers
8" to 6" Metal Reducer/Increaser
4530.10
4530.11
4530.12
4530.13
4530.14
4530.15
4" Duct Silencer 8" x 23.5"
46 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
6" to 4" Metal Reducer/Increaser
4" to 3" Metal Reducer/Increaser
6" to 4" Plastic Reducer/Increaser
5" Duct Silencer 9" x 23.5"
6" Duct Silencer 10.25" x 23.5"
8" Duct Silencer 12.5" x 23.5"
10" Duct Silencer 14" x 35.5"
12" Duct Silencer 17.75" x 35.5"
Ventilation
Ventilation Accessories
Outdoor Exhaust Hoods and Louvers
Roof Mounted — Black Roof Cap
10.5" x 11" x 4.375"
Wall Mounted — White and Brown
Plastic Hood
5.8" x 5.5" x15"
Wall Mounted — Black Model 843/885
6.5" x 6.5" x 5"
Wall Mounted — White Metal Hood
7" x 7" x 3.5"
Soffit Mounted
6.75" x 6.75" x 5.75"
Wall Mounted — Aluminum Model 641/643/613
12.5" x 13" x 6"
Wall Mounted — White Plastic Louver
6" x 6" x 1.25"
Wall Mounted — Metal Wall Cap
Metal Range Hood Cap Model 639
12.75" x 5.625" x 4.875"
Wall Mounted — Plastic Intake Grille
6" x 6" x 1.25"
Wall Mounted — Dryer Vent Closure
6.5" x 7" x 13.312"
Ordering Information
Outdoor Exhaust Hoods and Louvers
Outdoor Exhaust Hoods and Louvers
Roof Mounted — Painted metal
Wall Mounted continued
4510.41
4510.411
4510.410
4510.40
Wall Mounted
4" Black Roof Cap with connector collar
4510.54
4510.461
4510.52
4510.521
4510.46
4510.55
4510.02
4510.03
5501.447
3" or 4" Aluminum Model 885-AL
5510.60
5510.61
5510.62
5540.30
5540.322
5540.32
5540.321
Soffit Mounted
4" Black Roof Cap only
4" Connector Collar only
6" Black Roof Cap includes collar
3" or 4" Black Model 885-BL
6" Black Model 843-BL
5" White Plastic Louver with 12" Tail
6" White Plastic Louver with 12" Tail
4" Plastic Intake Grille — White
4" Plastic Intake Grille — Brown
6" Plastic Intake Grille — White
6" Plastic Intake Grille — Brown
4" or 5" Duraflo Soffit Vent — White
4510.3
4" or 5" Duraflo Soffit Vent — Brown
4510.32
Wall Mounted Metal Range Hood Cap
6" Aluminum Model 641
8" Aluminum Model 643
12" Aluminum Model 613
4" White Plastic Hood with flap and with 6" Tail
4" Brown Plastic Hood with flap and with 6" Tail
6" White Metal Hood with Screen, 8" Tail
4" White Plastic Louver with 12" Tail
3.25" x 10" Metal Wall Cap with flap
4510.5
Wall Mounted Dryer Vent
4510.50
Dryer Vent Closure with Spring Assist
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 47
Timers and Controls
Information: All of our timers are compatible with standard residential wiring, 120 vac. Some require 120 vac power to operate the
timer itself. Most require grounding. It is best to have a licensed electrician install fans and timers to insure safety and code compliance.
Some of the timers are programmable, some have a speed control option and some have an override function so as to use the
fan on full speed for a period of time. Please call if we can help you with your selection.
SmartExhaust™ Delay Timer Switch
• Eliminate moisture build up
• One dial for fan delay off setting
— Fan and light come on, switch shuts off light, fan keeps running
— Set delay for up to 60 minutes
• Second dial for fan run time per hour – up to 60 minutes
• Perfect for public housing, guest baths, kid’s bath
• Toggle available in white or almond
• Decora available in white only
Minutes per hour
run setting
Delay off
setting
Decora Style Available
24 Hour Electro-Mechanical Timer
• 72 pins, 20 minutes each
– Push in pins for any pattern over 24 hours
• 3 Operating modes
– Off: switch is disengaged
– On: Continuous run
– Auto: timed on/off pattern
Often this timer is located out of sight and wired in parallel with an
on/off wall switch.
• 3 wires
• Fits in a single gang box
• Allows the homeowner to use an exhaust fan for background ventilation
• Faceplate included
Ordering Information
|
Smart Exhaust™ Delay Timer Switch
24 Hour Electro-Mechanical Timer
5010.754
Smart Exhaust Timer — White Toggle
5010.2
24 Hour Timer Single Gang
5010.7541
Smart Exhaust Timer — Almond Toggle
5010.22
24 Hour Timer 2 Gang — One Toggle
5010.756
Smart Exhaust Timer — White Decora
5010.24
24 Hour Timer 3 Gang — Two toggles
48 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Timers and Controls
Timers and Controls
30-15-10-5 or 60-30-20-10 Electronic Timer
• Choose the appropriate amount of run time
• Five button with LED indicators
• Use ‘off’ to cancel operation
• 4 wires
• Fits in a single gang box, can be installed in 2 or 3 gang boxes
• 3 push pads included — white, ivory, and almond
• Decora style faceplate not included
24 Hour Electronic Programmable Timer
• 7 on/off cycles within 24 hour period
• Set each cycle for one day or 7 days
• Push pad overrides program for “as needed” operation
• Date and time displayed on LCD screen
• 3 Wires
• Fits a single gang box
• Two operating modes — manual and auto
• Decora style faceplate not included
60 Minute Mechanical Timer
• Mechanical spring wound timer
• Up to 60 minutes of operation
• Requires 2 wires
• Fits into a single gang box, can be installed in 2 or 3 gang boxes
• Comes with white and ivory plates for both Toggle and Decora style
Ordering Information
30-15-10-5 OR 60-30-20-10 Electronic Timer
60 Minute Mechanical Timer
5010.723 30-15-10-5 Minute Timer — White / Ivory / Almond
5010.045
5010.724 60-30-20-10 Minute Timer — White / Ivory / Almond
60 Minute Timer — White / Ivory
24 Hour Electronic Programmable Timer
5010.81
Seven Day Electronic Timer — White
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 49
Timers and Controls
Line Voltage Dehumidistat
• 2 wires
• Ensures the fan will turn on if the
occupant did not turn on the switch
• Range = 20%–80% R.H.
• Responds to rapid rise – not ambient
• Locate high on the wall – out of reach
• Surface mounted control, requires its
own box
• Dial adjustable to the desired RH
• Available in white only
Variable Speed Control
• Line voltage control — run a fan at low speed continuous
• Use with an on/off switch to provide boost capability
• 4 wires
• Can be used with an over-ride switch
• Fits in a single gang box
• Faceplate included
Aircycler System
• Use to circulate air throughout the house, averaging out temperatures
• Operates only when the heating or AC fan has not come on for a long period
• Use Air control damper and Intake grille to introduce fresh air
Recommended Parts to Introduce Fresh Air:
Return
Air
control
damper
Supply
Supply
Air cycler
6" Air Control Damper NC
Low voltage (normally closed)
6" intake Grille
Furnace/air
handler
Installation Example
Ordering Information
Line Voltage Dehumidistat
Aircycler FR-V
5010.63
5010.751
Line Voltage Dehumidistat
Variable Speed Control
5510.32 |
Dial Speed Control — Brushed Steel
AirCycler Timer Model FR-V
Parts used with FR-V Model
5540.3
6" Air Control Damper NC
5540.32
6" Intake Grille — White
5540.321
6" Intake Grille — Brown
50 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Intake
grille
6" insulated
air inlet duct
Timers and Controls
Timers and Controls
Airetrak Advantage™
• Low/High speed control
• Choose the following:
— Low speed setting
— Minutes per hour (5, 10, 15…)
— to repeat for 12 hours or 24 hours
• Operate the fan at low speed, boost when using the bath
• Full Speed boost — set for 20 minutes, 40 minutes or continuous
• Two buttons — fan only or fan/light
• 4 wires plus ground
• Fits in a single gang box, can be installed in 2 or 3 gang boxes
• 24 hour clock display
• Programming is held during power outages
• Decora style faceplate not included
GarageVent™ Fan Controller
The GarageVent™ controller will turn on an exhaust fan when it detects a
door has opened. After the door closes the GarageVent™ controller will
continue to run the fan for the set delay time.
• Turns on a ventilation fan when a door is opened and/or
set temperature is reached
• Delay off time can be from 0 to two hours
• Unlimited number of doors can be hooked up
• Can control any fan or motor up to 400 watts
• Mounts in a standard single gang wall box
• Uses a standard toggle switch cover plate
Kit includes:
— GarageVent™ Controller
— 2 Switch covers
— Cover plate
— 50' of hook up wire
— 2 Pair of door switches with double
sided mounting tape
— Wire nuts and screws
Installation Example
— Instruction sheet
Ordering Information
Airetrack Advantage
GarageVent™ Fan Controller
5010.431
5010.755
Airetrak Advantage™ Timer — White
GarageVent™ Fan Controller
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 51
Pressure Balancing
Airflow for an undercut door:
• 30" Door with .5" gap — 25 CFM
• 30" Door with 1" gap — 50 CFM
Example: If 177 CFM is being delivered to a room, using a 1" gap under the door and
a 12 x 12 Return Air Pathway can relieve the pressure. (50 + 127 = 177 CFM).
Pressure Balancing Return Air Pathways
• Installed in the interior wall, over or beside a door
• Relieves pressure differences within a house helping to balance
a ventilation, heating or air conditioning system
• Baffle design limits the transfer of light and sound while
allowing air to move through the wall
• Flange extends 2" beyond opening
• Includes 2 white wall grilles
“Perfect Balance” In-Door Air Pressure Relief System
Inexpensive in-door air pressure relief unit facilitates room-to-room air flow.
• Installed on the bottom of an interior door
• Eliminates pressure imbalances
• Baffle design limits the transfer of light and
sound while allowing air to move through the wall
• Allows HVAC systems to run more efficiently
• Easy to install
• Durable, high impact ABS plastic
• Replaces crossover or jump ducts, return grilles
ducted to a furnace or air conditioner
• Rough opening: 24" x 4"
• Product dimensions: 25" x 4.75" x 1.625"
Ordering Information
R.A.P
[email protected] Pascals
Opening
Grille Size
Pressure Balancing Return Air Pathways
5510.684
Pressure Balancing Return Air Pathway
12.4
48 CFM
12" x 4"
13.75" x 5.75"
5510.686
Pressure Balancing Return Air Pathway
12.6
69 CFM
12" x 6"
13.75" x 7.75"
5510.687
Pressure Balancing Return Air Pathway
14.8
109 CFM
14" x 8"
15.75" x 9.75"
5510.683
Pressure Balancing Return Air Pathway
12.12
127 CFM
12" x 12"
13.75" x 13.75"
[email protected] Pascals
Perfect Balance In-Door Air Pressure Relief System
5502.18
|
Perfect Balance In-Door Air Pressure Relief System
52 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
250 CFM
Air Sealing
Protective Gear
Safety Gear
North Half Respirator
Rattler Glasses/goggles
• Contoured sealing flange eliminates pressure points
• Extended side flanges ensure the best possible seal during
talking or other facial motions
• Interchangeable 3-position ratcheting
bayonet temples and an adjustable head
band with each pair
Stryker Goggles
Replacement Vapor Filter
• Recommended for respiratory protection against organic vapors
• 99.97% efficient against solid or liquid particles, including
oil-based particles
• Clear Anti-fog with indirect vent
Personal CO Leak Detector
• Compact
• 2 per pack
Booties (Not Shown)
Organic Vapor Cartridge
Disposable Sleeves (Not Shown)
• Innovative, comfortable protection
Disposable Coveralls
• Suits are packaged 25 per case
• Durable, breathable material
Replacement Vapor Filter
Mask Respirator
Organic Vapor Cartridge
Rattler Glasses
Stryker Glasses
Ordering Information
Safety Gear
6020.22 Case Quantity
Disposable Coverall with Attached Hood and Boots — M
25
6020.221 Disposable Coverall with Attached Hood and Boots — L
25
6020.222 Disposable Coverall with Attached Hood and Boots — XL
25
6020.223
Disposable Coverall with Attached Hood and Boots — 2XL
25
6020.224 Disposable Coverall with Attached Hood and Boots — 3XL
25
6020.225 Disposable Coverall with Attached Hood and Boots — 4XL
25
6020.132 Disposable Booties — 5 pair
25
6020.02 White Cotton Gloves — 12 Pair
25
6020.21
Rattler Glasses
6020.2
Stryker Goggles
6020.15
TY500 Disposable Sleeves
6800.401
North Half Mask Respirator Large
6800.402
North Half Mask Respirator Medium
6800.403
North Half Mask Respirator Small
6800.404
7581P100 Replacement Vapor Filter 2 pack
6800.405
6001 Organic Vapor Cartridge 2 pack
200
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 53
Low Expansion Foam
Low expansion foam is an Air Sealing product that can be used to block air
leaks in buildings from inside to outside, from outside to inside, and from
room to room within the structure. Typically used for small holes, seams and
linear gaps, plumbing, electrical, and HVAC penetrations. Low expansion foam
is a quick and economical way to help make buildings more comfortable
and energy efficient.
Low expansion foam used
along floor wall intersection
Low expansion foam used to seal
the gap around windows and doors
Uses and Information for Low Expansion Foam
• Use for:
– Cracks and small openings around windows
and doors
|
• 20 minutes to full cure. Less than 10%
expansion when cured
– Plumbing, HVAC and electrical penetrations
• The can of foam remains attached to the gun
between uses eliminating waste
– Seams and small openings in framing
• The trigger can be set to control the bead size
• Single component — moisture cured. Moisture
from the air or surface of wood promotes
curing. Use a spritzer during very cold, dry
weather to induce curing.
• Cleaner should be used infrequently
54 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Air Sealing
62 for
e
g
a
p
See
arming
w
m
a
o
f
ts!
produc
Low Expansion Foam
Todol Gun and Foam Starter Kit
Gun and Foam Starter Kit is ideal for carrying and storing
foam/gun assembly. It also helps to avoid damage to the
gun connections.
Starter kit includes:
• Carrying case
• Pageris gun
• Two 33 oz. canisters of PUR FILL 1G
• 10 Disposable needle tips for Pageris gun
• Can spray cleaner
Todol Gun Foam
Pur-Fil Foam and Construction Adhesive
• Less than 10% expansion
• 20 minute cure time
• 12 cans per case all types
PUR FILL 1G Foam
• 1,525 linear feet @ 3/8" bead
PUR FILL 1G Foam
PUR FILL WF Window Foam
PUR FILL WF
Window Foam
• 1,250 linear feet @ 3/8" bead
PUR Black Foam
• 1,525 linear feet @ 3/8" bead
• UV Resistant —great for outdoor use
PUR Black Foam
PUR STICK
Construction Adhesive
PUR STICK Construction Adhesive
• One can is equivalent to 8–10 quart tubes
• Tested and approved
• ASTM: C-557, APA: AFG-01
Tip: Low expansion foam needs a small amount of moisture in order to cure
properly. Most of the year, there is enough moisture in the air and on surfaces
to accomplish the task. During extremely cold and dry weather, use a spray
bottle to put a little water in cavities around windows, doors and other cracks
so the foam will fully cure and create the seal you need.
Ordering Information
Todol Products Gun Foam Starter Kit
Todol Products Gun Foam
3530.10
Gun and Foam Complete Starter Kit
3530.04 PUR FILL 1G Foam — 33 oz./750 ml.
12
3530.11
Carrying Case Only
3530.044 PUR FILL WF Window Foam — 24 oz./500 ml.
12
3530.042 PUR Black Foam — 33 oz./750 ml.
12
3530.043 PUR STICK Construction Adhesive — 20 oz.
12
Case QTY
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 55
62 for
e
g
a
p
See
arming
w
m
a
o
f
ts!
produc
Low Expansion Foam
One Time Use System with Shut Off Valve
• Each Kit comes with a 10' hose and wand
• Meets ASTM E-84, E-814 and UL-1715
• Yields: 10 lb. kit = 6,800 linear feet @ 3/8" bead
16 lb. kit = 10,900 linear feet @ 3/8" bead
• Attach hose directly to a bottom load gun
for neater application
Bottom Load Gun
INFORMATION: 10 & 16 lb. tanks and 200 and 600 kits
shipped via UPS require a $27.50 Haz-Mat charge per unit.
Touch `n Seal Gun Foam
12 cans per case all types
Touch `n Seal All Season
Touch `n Seal Fireblock
• Can be dispensed down to 20°F
• ASTM 814 Tested
• 1000 linear feet @ 3/8" bead
• Type V Residential Fireblock with
orange pigment
Touch `n Seal No-Warp
• Exerts less curing pressure
• 900 linear feet @ 3/8" bead
• ICC certified ESR-1926
• 922 linear feet @ 3/8" bead
All Season
Fireblock
Touch `n Seal Gun Cleaner
• Can be attached directly to the foam
applicator gun
No-Warp
Foam Gun Cleaner
Ordering Information
One Time Use System Foam
|
Set per Pallet
Touch ‘n Seal Gun Foam
Case QTY
3530.02 10 lb. Polyurethane Foam System*
30
3530.20 3530.022 16 lb. Polyurethane Foam System*
50
3500.64 Touch `n Seal No-Warp — 20 oz.
12
3530.025 Extra 10' Gray Hose with Wand
3530.25 Touch `n Seal Fireblock — 24 oz.
12
6510.307 Bottom Load Gun for 10 and 16 lb. Tanks
6570.01 Foam Gun Cleaner
12
56 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Touch `n Seal All Season — 24 oz.
12
Air Sealing
Low Expansion Foam
Foam Guns and Accessories
Professional Grade
One month use
• Pageris foam gun
• Pur Shooter foam gun
• Pageris foam gun with 24" barrel
• Sharpshooter X
One time use — one job, one day
• Sharpshooter D
Extra Long Barrel
• Disposable needle tip (for Pageris only)
• Foam gun with 27" barrel
• Plastic syringe body (for Pageris only)
Pageris
• Foam gun with 40" barrel
PUR-Shooter
Sharpshooter X
27" Long Barrel
Sharpshooter D
40" Long Barrel
TIP: Put an electrical nut filled with petroleum jelly
on the tip of your foam gun in between uses.
This will protect the tip from damage and keep it
sealed from moisture penetration. Be sure to pull
the spring out of the wire nut to avoid scratching
and damaging the tip.
Ordering Information
Foam Gun and Accessories
Foam Gun and Accessories
Professional Grade
One Time Use
6510.03 Pageris Foam Gun — Professional Grade
6510.303 6510.04 2" Disposable Needle Tip (For Pageris Only)
Extra Long Barrel
6510.07 Plastic Syringe Body (For Pageris Only)
6510.035
Foam Gun with 27" Barrel; 32" Overall
6510.309 Foam Gun with 40" Barrel; 49" Overall
One Month Use
6510.038 Pur Shooter Foam Gun — One Month Use
6510.306 Sharpshooter X — One Month Use
Sharpshooter D — One Time Use
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 57
High Expansion Foam
High expansion foam is an Air Sealing product that can be used to block air
leaks in buildings from inside to outside, from outside to inside, and from
room to room within the structure. Typically used for large voids and openings,
high expansion foam is a quick and economical way to help make buildings
more comfortable and energy efficient.
High expansion foam
used along rim joist
High expansion foam around
boxes over leaky recessed lights
Uses and Information for High Expansion Foam
• Use for
– big voids — i.e. rim joists, roof/wall joints or
big gaps in framing — i.e. under crawl spaces
– blind corners
– under hot tubs and Jacuzzis
– wall/ceiling intersections
– around boxes over can lights
• Two components — A and B in
separate canisters
• A tank is red, B is white
• 1.75 lb. density
• Cures through a chemical reaction. Can’t stop
the process once it starts.
• Cures to 3 – 5 times its output size. 40 seconds
to 90% cure, 2 minutes to full cure
• Dispensed with a gun and double
hose assembly
• Components first meet in the nozzle of the
gun. Nozzles are replaceable.
• With larger kits, hoses can be transferred to
subsequent kits up to 5 times
• Kit should be used within 2 weeks once
factory seals are broken
• Sprays out with the consistency of oatmeal
|
58 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Air Sealing
High Expansion Foam
Dispensing System
62 for
e
g
a
p
See
arming
w
m
a
o
f
ts!
produc
Constant Pressure Dispensing System
• On-board compressor pushes foam out of the tanks
Save time
• Consistent mix and flow from beginning to end of each set of tanks
Save money
• Complete use of both components
Save your back
• Easily reach attics, basements and crawl spaces with
up to 120' of hose
• No need to keep moving heavy tanks
750 FR Board Foot Set — Closed Cell
• 750 board feet or 62.5 cubic feet
• R-value = 7 per inch, 85% closed cell
• Fire Retardant Formulae, class 1, ASTM E-84
• Kit weighs 136 lbs. 68 per tank
• 12 sets per pallet
1200 FR Board Foot Set — Open Cell
• 1200 board feet or 100 cubic feet
• R-value = 4.0 per inch, <10% closed cell
• Fire Retardant Formulae, class 1, ASTM E-84
Hose to hose shut off valve
• Kit weighs 136 lbs. 68 per tank
• 12 sets per pallet
The CPDS Series 2 Systems comes with the following:
• On board compressor
• 2 spray guns with 50 nozzles
• Heater and cover
• Tool box with wrenches
• 30' of hose
• Cleaner
• 6' Heavy duty cord
• Instructions with a demo DVD
• On/off valves for hoses and tanks
Purchase extra 30' hose sets and foam separately. Use up to 120' of hose
on the system.
Ordering Information
Constant Pressure Dispensing System
Sets per Pallet
Constant Pressure Dispensing System
Bag Quantity
3530.429 CPDS Series 2 System
3530.415
750 FR A & B tanks
12
6510.302 Clear Cone Spray Nozzle
3530.4151
1200 FR A & B Tanks
12
3530.418
Hose to Tank Shut-off Valve
3530.421 30' Hose Set
3530.419
Hose to Gun and Hose to Hose Shut off Valve
3530.417 Extra Gun with 12" Hose
6510.301 Yellow Fan Spray Nozzle
25
25
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 59
High Expansion Foam
Single kits — one time use
62 for
e
g
a
p
See
arming
w
m
a
o
f
ts!
produc
600 Board Foot Kit — 50 Cubic Feet
600 Board Foot Set — Closed Cell
1000 Board Foot Set — Open Cell
• 600 board feet or 50 cubic feet
• 1000 board feet or 83 cubic feet
• R-value = 7 per inch, 85% closed cell
• Kit includes a 30' gun hose assembly
• 1.75 lb. density
• R-value = 4.0 per inch, <10% closed cell
• Kit weighs 110 lbs., 55 lbs. per tank
• 1 lb. density
• 12 sets per pallet
• Kit weighs 110 lbs., 55 lbs. per tank
• Gun hose assembly NOT included
• 12 sets per pallet
• FR version is available
• Fire Retardant Formulae, Class 1, ASTM E-84
200 Board Foot Kit — 16.6 Cubic Feet
200 Board Foot Kit — Closed Cell
• 200 board feet or 16.6 cubic feet
• R-value = 7 per inch, 85% closed cell
• Includes 10' gun/hose assembly with nozzles
• Kit weighs 39 lbs.
• 36 sets per pallet
• FR version is available
• Fire Retardant Formulae, Class 1, ASTM E-84
Information: Slow Rise can be special ordered for
projects that require it.
15 Board Foot Kit — 1.25 Cubic Feet
• 15 board feet or 1.25 cubic feet
• R-value = 7 per inch, 90% closed cell
• Great for small fill-in work, fill cracks, gaps and holes
• Kit weighs 3.5 lbs.
Ordering Information
600 Board Foot Kit — 50 Cubic Feet
Pallet
Pallet
3530.406 600 A & B Tanks
12
3530.405 200 Kit
36
3530.407 600 A & B Tanks — FR
12
3530.404 200 Kit — FR
36
15 Board Foot Kit — 1.25 Cubic Feet
1000 Board Foot Kit — 83 Cubic Feet
3530.41 |
200 Board Foot Kit — 16.6 Cubic Feet
1000 A & B Tanks with hose
12
3530.19 60 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
15 Kit with hose and thumb nozzle
Air Sealing
High Expansion Foam Accessories
Information: Materials may be stored below 70°F. However, temperatures of A & B canister materials must be brought to a
minimum of 70°F prior to application. Canisters stored in low temperatures may require more than 24 hours to warm their
chemical contents.
For optimum performance and foam quality, the temperature of the spray environment and foam materials should be 70–80°F.
Application in temperatures below 70°F may increase set up time and reduce overall performance of polyurethane foam.
There are two types of spray foam: open-cell and closed cell. Closed cell foams have a higher R-value than open-cell foam, and
are less vapor permeable, and thus serve as a vapor barrier as well as an air-barrier.
Gun Hose Assembly Kit
• Gun/Hose assembly for 600 tanks.
• 15' and 30' lengths available
Kit includes:
— Gun hose assembly (15' or 30')
— Wrench
— 5 Yellow fan spray nozzles
— 1 pair gloves
— 5 Clear fan spray nozzles
— Lubricant
Nozzles
• Yellow fan spray nozzle (Bag Quantity: 25)
• Clear cone spray nozzle (Bag Quantity: 25)
Ignition Barrier Coating
Developed specifically for spray polyurethane foam (SPF) barrier
requirements. This product is a latex based coating that acts as a shield
protecting the substrate from the exposure to flames by covering the
treated material with a protective char-barrier.
• 5 Gallon bucket — 55 lbs.
• Brush or spray applied: 150 – 300 sq. ft. coverage per gallon
• Complies with IBC/IRC–2009 codes per AC377 Appendix X
• Latex based — soap and water clean up
• 24 hour cure, 36 month shelf life
Ordering Information
Gun Hose Assembly
Gun Hose Assembly
Bag Quantity
6510.316 15' Gun/Hose Assembly for 600 tanks
6510.301 Yellow Fan Spray Nozzle
25
6510.317
30' Gun/Hose Assembly for 600 tanks
6510.302 Clear Cone Spray Nozzle
25
Ignition Barrier
3530.431
Ignition Barrier Coating
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 61
Foam Accessories
Low and High Expansion Foam
Spray Foam Cylinder Wrap
• Outer material: nylon shell CPAI 84
— 2000 PSI
• Middle: heat retaining flexible barrier
• Heavy duty industrial cord
• Handy cord storage pocket
• Insulation: closed cell polypropylene
• Cylinder wraps maximum
heat 85°F
• Inner lining: nylon
• 11.5" High x 41" long
• Velcro closure & adjustable cinch straps
• 120 Vac — 50 watts
Information: Cylinder wrap fits around one 16 lb. tank, 600 or 750
tank OR both of the 200 tanks. Mini wrap fits around 10 and 16 lb. tanks.
Heated Foam Hose Sleeve Starter and Extensions
• Outer material: heavy duty nylon shell CPAI 84 — 2000 PSI
• 6' Heavy duty industrial cord
• Self regulating heat tape warming system — 5 watts per foot
• 25' Long — gangeable to
150' with extension pieces
• Polyethylene closed cell flame retardant foam insulated lining
• Slides on with easy pull string system
• 120 Vac — 5 watts per foot
• Nylon tie wraps secure heat tape to foam hose
Sealant Warmer
• 1" Nylon strap with quick disconnect, velcro closure on flap
• Heavy duty industrial cord
• Handy cord storage pocket
• 18" High x 15" wide x 3" deep
• 120 Vac — 50 watts
Holds:
• 12 standard tubes of sealant OR
• 6 quart size tubes of sealant OR
• 6 cans of foam OR
• 8 rolls sealing tape
• Maintains sealant at 80°F even when the outside temperature drops to –13°F
Ultra-compact DC/AC Inverter
• 12V AC/DC input; 120v output; 2 outlets
• 375 watts continuous output
• Convenient cigarette lighter plug
Ordering Information
Warming Wraps
|
Sealant Warmer
3530.801
Cylinder Wrap — for 16 lb. tank, 200 and 600 kits
3530.805
Mini Cylinder Wrap — for 10 lb. tank
3530.803 Foam Hose Wrap 25'
3530.804
Foam Hose Wrap 25' Extension
3530.802
Sealant Warming Bag
DC/AC Inverter
7300.901
62 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Tripp Lite PowerVerter
Air Sealing
62 for
e
g
a
p
See
arming
w
t
n
a
l
a
se
ts!
produc
Air Sealing Products
Caulks — Interior/Exterior
100% Silicone
Caulk Zero
• Flexible, waterproof; temperature range
–65°F to 400°F
• 100% Silicone is not paintable
• Zero VOCs and glycols
• Rated 50 years
• Paintable
• Indoor/outdoor use
• Indoor and outdoor use
• Rated 50 years
Caulk Gun
• 12 Tubes per case
• Heavy duty parallel frame
Siliconized Acrylic Latex
• 11 oz. cartridge size
• Paintable, indoor/outdoor use
• Rated 30 years
• 12 Tubes per case
Fire Break Caulk
Fire Break Caulk is a non-combustible filler compound used for fire stopping
applications around pipes, ducts, vents, electrical wiring, masonry and
other penetrations in the building envelope.
Two types available:
• ASTM E-136 Residential
code approved
• ASTM E- 814 Commercial
code approved
• 12 Tubes per case
Backer Rod Pro
Use Backer Rod in cracks and gaps around windows and doors as a
backer for low-expansion foam. Convenient Pro Packs come with an
easy to dispense hole in the top of the box and ready to go handles
making any large job a breeze.
• 3/8" x 350 ft. = Green Box
• 1/2" x 250 ft. = Yellow Box
• 5/8" x 150 ft. = Orange Box
Ordering Information
Caulks — Interior/Exterior
Case QTY
Fire Break Caulk
3500.065
Tower Caulk Zero — White
12
3500.65
Astm E-136, Residential, 4 Hr Rating
12
3500.063
Dupont 100% Silicone — White
12
3500.66
Astm E-814, Commercial, 8 Hr Rating
12
3500.064
Dupont 100% Silicone — Clear
12
Backer Rod Pro
3500.062
Dupont Siliconized Acrylic Latex — Clear
12
3530.201 71550
3/8" x 350 ft. Backer Rod Pro Pack
3500.061
Dupont Siliconized Acrylic Latex — White
12
3530.202 71551
1/2" x 250 ft. Backer Rod Pro Pack
3530.203 71552
5/8" x 150 ft. Backer Rod Pro Pack
Caulk Gun
6500.02
Deluxe Caulk Gun (Cartridge)
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 63
Duct Sealing Products
Duct Sealing Information
By properly installing and then sealing ducts, the contractor can diminish the
possibility of moisture and mold problems, the potential for back drafting
appliances, and introducing pollutants to the living environment. It’s water
based so it's easy to apply and clean up.
When sealing ducts we recommend:
• Seal all seams and joints by applying
with a brush
• Use Butyl Tape as an alternate to
seal seams
• Use mastic along with mesh tape to
bridge the gap and strengthen the seal
Duct Sealing Supplies
Mastic
RCD #6 is a non-toxic adhesive sealant used to seal joints and seams of
low to high velocity air ducts.
• Available in 2 gallon, 1 gallon, and 11 oz. tubes
• Use mesh tape as backer
• Water based, fiber reinforced
• 12 — 11 oz. tubes per case
• Elastomeric
• 80 Two Gallon buckets per pallet
• Off white in color
• 150 One Gallon buckets per pallet
Butyl Foil Tape
• Alternative to mastic
• Meets all SMACNA pressure and sealing classes
• UL 181 B-FX Listed
• 16 Rolls per case
• Backing: 2 mil soft alum, Adhesive: 15 mil butyl
FilterLock Duct Filter Seal
FilterLock is designed to cover and seal common 1" furnace filter slots.
• Accommodates slots up to 25" long
• Magnetic strips in the edges of each piece hold the
unit in place and seal most leakage
Ordering Information
|
Duct Sealing Supplies
Duct Sealing Supplies
Mastic
Butyl Tape
3520.02
RCD #6 Mastic 2 Gallon Bucket
6800.301
3520.04
RCD #6 Mastic 1 Gallon Bucket
Duct Filter Seal
3520.03
RCD #6 Mastic 11 oz. Tube
6800.302
3520.05
RCD #7 Mastic — 1 Gallon Bucket Grey
6800.061
Mesh Tape 3" X 150'
64 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Duct Sealant Butyl-Foil Tape 3"X100'
Filter Lock Duct Filter Seal
Air Sealing
Air Leakage Detectors
Smoke Pencil
• Used to detect leaks in buildings
• Uses non-toxic glycol, glycerin and water solution vapor
Kit includes:
— Smoke Pencil Pro
— Adapter Tip
— 7 AA Batteries
— Screwdriver
— 3oz. Smoke Fluid
— Instruction Sheet
— Black Case
Smoke Pen
• Easy to use
• 6 replacement wicks provides 3 hours of continuous
smoke or hundreds of 30 second tests
• Uses non-toxic smoke sticks
Retrotec Leakage Detector — Pick Up Only
• Used to detect leaks in buildings
• Uses titanium tetrachloride
• Good for over 1,000 puffs or l year, once activated
• Pick up only, cannot ship
Ordering Information
Smoke Pencil
Smoke Pen
3570.125 Smoke Pencil Field Kit
3570.12
Smoke Pen includes 6 Wicks
3570.124 Smoke Pencil Fluid Refill
3570.121
Smoke Pencil Refill — 6 Wicks
3570.123 Smoke Pencil Adapter Tip
Leakage Detector
3570.10
Retrotec Leakage Detector
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 65
Air Sealing Products
CanCoverIt Recessed Can Cover
CanCoverIt is made of durable FSK facing and FSK tape to ensure an air tight fit once sealed
to the attic floor. It is easy to cut and fit around the brackets, wires, and framing. Simply seal
the bottom edge with low expansion foam.
• Exterior Fire Resistance rating UL 723/ASTM E84 — 0 Smoke, 5 Flame Spread
• Fiberglass interior heat resistance 475 – 700°F
• Lightweight — approximate 1.5 lbs. per unit
• Fits typical 6" Can-Fixture and up to 7" max. can diameter
• Manufactured in the USA
Universal
Low Profile
External Dimensions: 14" x 14" x 22"
Internal Dimensions: 13" x 13" x 21.5" External Dimensions: 14" x 14" x 12"
Internal Dimensions: 13" x 13" x 11.5"
Insul-Bag
Insul-Bags™ are mesh-style bags intended to provide an effective, versatile,
economical, lightweight, low-tech, durable, and easy-to-use method of creating
bagged insulation (dense-packed cellulose or fiberglass) to seal and insulate key
junctures & attic bypasses, to create “plugs” in wall and/or floor cavities, and to
serve as insulation dams. Properly installed, packed Insul-Bags™ are an effective
product as part of a system to reduce/eliminate ice dams in cold climates.
Effective method for air sealing and insulating:
• floor and wall cavities of balloon-framed homes
• band joists
• cantilevered floors
• bases of knee walls
• sloped ceiling cavities
• 100 Bags per case
Sill box cavities
Exterior wall top plate in attic
Ordering Information
|
CanCoverIt Recessed Can Cover
Insul-Bag
5700.31
Universal — Non IC-rated Cans
3570.401
5700.32
Low Profile — IC-rated Cans
66 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Mesh Insul-bag — Bundle of 100
Air Sealing
Air Sealing Products
Therma-Dome
• Insulation cover for folding attic stairways
• Constructed of a durable, laminated foil urethane insulation
• Foam gaskets and tie-downs provide continuous draft seal
• R-value = 13.6, 1.5" rigid foam
• Inside dimensions 27" W x 60" L x 10.5" H
Attic Tent™
• Lightweight, easy to install
• Fully assembled, installs in 15 minutes
• Installs using a staple gun and caulking or tape
• Zipper allows safe and easy access
• Creates air barrier with 3.2 R-value
• 4 sizes available
Ordering Information
Thermadome
3570.011
Attic Stair Cover
Attic Tent
3570.3
At-1 22" X 54" X 7"
3570.31
At-2 25" X 54" X 7"
3570.32
At-3 22" X 54" X 13"
3570.33
At-4 25" X 54" X 13"
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 67
Air Sealing Products
Q-lon Door Weather-Stripping
Aluminum Carrier
Primed Wood Vinyl Carrier
• Q-lon vinyl faced foam mounted on painted aluminum, primed
wood or vinyl carrier
Loose Strip
Brush Sweep
Triple Door Sweep
• Seals up to 1" gaps, compensating for door bowing or warping
• Two 6'8" side strips, one 3' header piece
• Q-lon maintains flexibility to –4°F
DXL Low Profile
3/8"
Triple Door Sweep
DS050
5/8"
7/8"
5/8" Brush Sweep
7/8"
5/16"
5/16"
.375"
1 1/2"
1 1/4"
5/8"
1"
DS060 Wide
7/8"
5/8"
.100
.110± .010
Q-Lon C-Fold
Door Bottom
Door Bottom
.275"
REF.
.092
1"
.580"
1 3/8"
3/4"
5/8"
.100
5/16"
5/8"
DS060 Narrow
Q-Lon Loose Strip
.329"
1"
.650"
5/8"
.500"
.140"
.525"
Ordering Information
Carrier
Q-Lon
Case QTY
Q-Lon Weather-Stripping Kits
Q-Lon
Case QTY
DS060 Wide Vinyl Carrier with Q-Lon
DXL Low Profile Metal Carrier with Q-Lon
3540.512
White
White
12
3540.501
Mill
Black
30
3540.513
Brown
Brown
12
3540.502
White
White
30
Triple Door Sweep
3540.503
Brown
Brown
30
3540.514
Mill
Grey
100
DS050 Standard Metal Carrier with Q-Lon
3540.515
White
Grey
100
3540.504
Mill
Grey
20
3540.516
Brown
Grey
100
3540.505
White
White
20
5/8" Brush Sweep
3540.506
Brown
Brown
20
3540.517
Mill
Black
100
3540.518
Brown
Black
100
DS060 with Primed Wood Carrier with Q-Lon
3540.507
White — Primed
White
12
3540.508
White — Primed
Brown
12
DS060 Narrow Vinyl Carrier with Q-Lon
|
Carrier
3540.509
White
White
15
3540.511
Brown
Brown
15
Loose Q-Lon Strips
3540.17 QDS 650
86" Loose Strip — White
125
3540.16
86" Loose Strip — Brown
125
3540.21 QDS 375
86" C-Fold Loose Strip — White
150
3540.20 QDS 375
86" C-Fold Loose Strip — Brown
150
68 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
QDS 650
Air Sealing
Air Sealing Products
Door Sweeps
Spring Loaded Door Sweeps
Triple Flange Door Sweeps
• Spring loaded, turns up when door is
opened to clear carpets
• Seals up to 1/2" between threshold
and bottom
• Aluminum and Vinyl Triple Flange — 36"
Heavy Duty Door Sweeps
• Seals up to 3/4" between threshold
and bottom
Window Weather-Stripping
V-Seal Window Weather-Stripping
• Pre-formed V-Seal weather-stripping with adhesive backing
is used to block air leakage around double hung windows
• Use wide on bottom sill, top of window and sash sides
• Use narrow on meeting rails
Pulley Seals
• Includes gasket and screws for secure fit
Pulley Seals
• Reduces infiltration by covering pulley weight holes
Sash Locks
• Brass construction
V-Seal
• Tightens double hung windows reducing infiltration
Sash Locks
Ordering Information
Door Sweeps
Case Qty
Spring Loaded Door Sweeps
Window Weather-stripping
3560.022 Schlegel Best Quality Wide White — 1.25" X 7'
Case Qty
100
3550.13
Automatic Pop-Up Sweep Sgl Flange — 36" Wh
6
3560.025 Schlegel Best Quality Narrow White — 0.6" X 7'
100
3550.12
Automatic Pop-Up Sweep Sgl Flange — 36" Br
6
3560.03
Schlegel Best Quality Wide Tan — 1.25" X 7'
100
3560.05
Schlegel Best Quality Narrow Tan — 0.6" X 7'
100
Triple Flange Door Sweeps
3550.166 Aluminum and Vinyl Triple Flange — 36"
50
Heavy Duty Door Sweeps
3560.041 Polyflex Wide Clear — 1.25" X 7'
100
3560.07
250
Polyflex Narrow Clear — 0.375" X 7'
3550.1
Heavy Duty Aluminum/Vinyl Double Flange—36"
6
Pulley Seals
3550.11
Heavy Duty Aluminum/Vinyl Double Flange—48"
6
3560.021 Bag Of 25 Pair — White
Sash Locks
6520.02
Ives Clamshell Sash Lock
125
6520.04
Ives Side Fastener Lock
125
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 69
Air Sealing Products
Tu-Tuf Vapor Barrier
• White cross-laminated virgin poly sheeting; made from
high-density resins
• Use on warm side of outside walls; under concrete flooring;
around outside perimeter of foundations
• 6.4x more puncture resistant than low-density 4-mil poly
White
Information:
Vapor Permeance: Water Resistance: Tensile Strength:
Puncture Resistance:
Translucent
0.00741
100 dry indicator/hour
8,507 psi, 34 lbs. per inch width
275.8 beach units
Vapor Barrier Sealing Products
Tremco Seam Sealant — Quart
• Use for sealing drywall partitions and
party walls; vapor barrier seams
Delux Caulk Gun — Quart
Venture Construction Tape
• Ideal for latex, silicone, adhesive rubber
compound, and polyurethanes
• 12 Tubes per case
• Use for sealing seams and repairing cuts
in housewraps, foamboards, poly barriers
• Performance below freezing to –35°F
• 16 Rolls per case
Ordering Information
|
Tu-Tuf Vapor Barrier
Vapor Barrier Sealing Products
5520.211
9' X 100' #4 White
6800.021
Venture Construction Tape 2" X 216'
8
5520.23
12' X 100' #4 White
3500.4
Tremco Seam Sealant (Quart)
12
5520.210
9' X 100' Xf Translucent
6500.03
Deluxe Caulk Gun (Quart)
5520.230
12' X 100' Xf Translucent
70 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Case QTY
Air Sealing
Air Sealing Products
Air-Tite Cover Plates
• Heavy plastic plates in White or Ivory
Available in two colors
• Gasket pre-installed — no cutting
• Outlets have a snap in plastic plate for
sealing and safety when not in use
White
Ivory
• Fits standard wall switches and 3-prong plugs
Switch Plate
Back Side
Double Switch Plate
• Screws included
Quad Switch Plate
Triple Switch Plate
Double Outlet Plate
Outlet Plate
Telephone Plate
Cable Plate
Lessco Air and Vapor Tight Boxes
• Use behind standard electrical boxes
• Fits up to a 3-gang box
• Sturdy flange for air/vapor barrier attachment
• 60 Boxes per case
Airfoil Air and Vapor Tight Electrical Boxes
• Solid one piece construction
• Eliminates air and moisture movement
through electrical openings
• Provides visible airtight seal — easily
installed and inspected
Ordering Information
Airtite Cover Plates
Airtite Cover Plates continued
3530.381
Outlet — White
3530.383
Switch/Outlet — White
3530.371
Outlet — Ivory
3530.373
Switch/Outlet — Ivory
3530.382
Switch — White
3530.386
Telephone — White
3530.372
Switch — Ivory
3530.376
Telephone — Ivory
3530.384
Double Outlet — White
3530.387
Cable — White
3530.374
Double Outlet — Ivory
3530.377
Cable — Ivory
3530.385
Double Switch — White
Air and Vapor Tight Electrical Boxes
3530.375
Double Switch — Ivory
5700.01
LESSCO Box
60
3530.388
Triple Switch — White
5700.17
Airfoil Single Gang Box
40
3530.378
Triple Switch — Ivory
5700.171
Airfoil Two Gang Box
24
3530.389
Quad Switch — White
5700.172
Airfoil Round Outlet Box
36
3530.379
Quad Switch — Ivory
5700.173
Airfoil Fan Box Round
15
Case Quantity
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 71
SIGA Professional Tapes
All Siga High Performance Tapes have the following features and benefits:
• Acrylic based — will not dry out
No solvents or toxins
• Rainproof and weather resistant —
No worries on the job site
• Can be used to below freezing temperatures
— No heating of product or surfaces
is necessary
Corvum 12/48
Interior tape for door and window frames
• Seal the seam around windows and doors —
Quick and easy application
• Pre-folded — Allows application to inside corners
• Works in the cold on cold surfaces —
No need to heat the tape or the surface
[email protected]
Rissan 60
Interior tape for seams and penetrations
• Use around pipes and penetrations — Eliminate caulks
and sealants
• Use on vapor barriers/seams — Quick easy application, no roller necessary
• Flexible and elastic — Seal any odd shaped penetration
[email protected]
Ordering Information
SIGA Adhesives — Interior
|
6800.502
Corvum 12/48
6800.501
Rissan-60
Case Quantity
0.4/1.89" x 82'
10 Rolls
2.4" x 82'
10 Rolls
72 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Air Sealing
SIGA Professional Tapes
Wigluv
Exterior tape for seams and penetrations — plumbing, electrical, ventilation
• Seal all seams on exterior cladding, barriers or foam board — Save time on the details
• Seal all housewraps to concrete, window and door frames — Move quickly creating
the bond with hand pressure, no rollers needed
• Wigluv 20/40 — Use outside on windows and doors at inside corners to bond the
frame for windproof and water proof seals. Backing is slit in the middle to make
installation easy.
• Wigluv 60 — Use outside for wind tight sealing of breathable membranes and facade
membranes, for overlaps, and penetrations on the outside.
• Wigluv 100, 150 and 200 — Use outside for wind tight sealing of roof insulating and
facade boards. Combined with the high-performance primer Dockskin, Wigluv 100,
150 and 200 offer a unique solution for wood fiber boards and masonry, and for
foundation to wall joints.
20-40
60
100
150
200
Dockskin
High Performance Primer
• Ensures a strong bond to rough surfaces —
Worry free application
• Brush on primer — Easy to apply with a brush or roller
• Usable on cold surfaces down to –14°
— No need to warm product or surfaces
Ordering Information
SIGA Adhesives — Exterior
Case Quantity
SIGA Adhesives — Exterior
Case Quantity
6800.5041
Wigluv-20/40
2.4" x 131'
10 Rolls
6800.5043
Wigluv-150
5.9" x 82'
4 Rolls
6800.504
Wigluv-60
2.4" x 131'
10 Rolls
6800.5044
Wigluv-200
9" x 82'
2 Rolls
6800.5042
Wigluv-100
3.9" x 82'
6 Rolls
6800.503
Dockskin 2.2lb Can
2.2 lb.
6 Cans
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 73
Testing Equipment
Minneapolis Blower Door™
• Precision engineered, calibrated equipment
• DG 700 Digital pressure and flow gauge — highly accurate
• Lightweight and rugged injection molded fan housing
• Quick and accurate flow measurements from 300 to 6,300 CFM
• Powerful 3/4 hp motor provides continuous flow for testing and air sealing work
• Able to perform with both pressurization and depressurization testing
Minneapolis Duct Blaster™
• DG 700 Digital pressure and flow gauge
• Quick and accurate airtightness measurements from 10 to 1,500 CFM
• Ideal for new construction applications where a Blower Door can’t be used
• Able to perform with both pressurization and depressurization testing
Air Grille Masking Tape
• Designed specifically for duct diagnostics and leakage testing
• Use this tape to seal duct grilles and registers
• 8" x 200' Rolls
• 6 Rolls per case
• Perforated every 4"
• Easily dispensable wide rolls with adhesive backing that will not remove paint from
factory painted surfaces and grilles (test for removal of paint from hand painted grilles)
Ordering Information
Minneapolis Blower Door
Grille Seal
5200.953
3520.01
Blower Door
Minneapolis Duct Blaster
5200.954
|
Duct Blaster
74 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Case Quantity
Premium Grille Seal
6
Testing Equipment
Testing Equipment
Exhaust Fan Flow Meter
• Make quick and accurate measurements of air flow through residential exhaust fans
• Small, light and easy to use
• Measure airflows down to 10 CFM and up to 120 CFM
• 13" x 16" x 8" deep
• Accuracy to 10% when used with the DG-700 measuring gauge
• Includes a short handle that can be attached to a painter’s pole for high ceilings
FLIR Infrared Cameras
Use Infrared Cameras to help you identify problems that exist in buildings.
Thermal Imagers can help you find voids in insulation, air leaks and
moisture sources.
These cameras can be used to make powerful presentations to your
customers and prospects. They will help you understand how buildings
operate while helping you to save your customers energy and money.
Flir E4
Quickly locate heating and cooling duct leaks as well
as clogged plumbing to prevent energy waste and
potential damage.
Flir E6
• 80 x 60 Resolution
• 120 x 90 Resolution
• 0.015 °C sensitivity
• 0.06° C sensitivity
• -4 to 483°F temperature range
• -4 to 483°F
temperature range
• 4 hour battery
• 4 hour battery
Flir E5
Detect problems with air conditioners and heaters, and
troubleshoot radiant flooring components to maximize
energy efficiency.
• 120 x 90 Resolution
• 0.010 °C sensitivity
• -4 to 483°F temperature range
• 4 hour battery
Ordering Information
Exhaust Fan Flow Meter
5200.962
Camera Accessories
Exhaust Fan Flow Meter
FLIR Infrared Cameras
7000.5175
Spare Battery
7000.904
Battery Charger
7000.5161
Flir E4 Infrared Camera
7000.903
Tool belt
7000.5162
Flir E5 Infrared Camera
7000.901
Pouch Case
7000.5163
Flir E6 Infrared Camera
7000.902
Car Charger
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 75
Testing Equipment
Borescope
Use the Extech BR80 and BR300 Borescopes to inspect Heating and AC
systems, the interior of walls and floor systems and any other hard to see
places. Imaging and illumination are provided by a full color LCD screen.
Extech BR80
• 2.4" color LCD monitor
• 39" flexible cable
• LED lights illuminate image
• Batteries, mirror, hook and magnet included
Extech BR300
• Waterproof and lightweight
BR80
• 2x digital zoom for close up viewing
• 2.7" color LCD monitor
BR300
• 39" flexible cable
• LED lights illuminate image
• Batteries, mirror, hook and magnet included
Moisture, Temperature, and Humidity Testing
Extech MO210 Pocket Size
Moisture Meter
Extech 42509 Dual Laser
IR Thermometer
• Digital readout and bar graph
• Fast and accurate measurements at 12"
• Use on wood, wallboard, sheet rock,
planter, concrete and mortar
• Blue screen turns red when temperature
exceed set limits
• Comes with protective cap, replacement
pins and batteries
• Dual Lasers increase accuracy
Extech RT10 Humidity & Temperature
Log with USB
• Use to data log humidity and temperature
Ordering Information
|
Testing Equipment
Testing Equipment
Extech Borescope
Extech Moisture, Temperature, and Humidity Testing
7000.526
Extech BR80 Borescope
7000.914
Extech MO210
7000.522
Extech BR300 Borescope
7000.915
Extech 42509
7000.916
Extech RT10
76 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Testing Equipment
Testing Equipment
Fyrite™ Insight Plus Combustion Analyzer
• Residential use
• In-field calibration and sensor replacement
• Little or no down time
• Measures the following
– Combustion and Efficiency
– Room Air CO
– Flue Gas CO
– Dual Channel Digital Temperature
Reading (up to 999°F)
– Digital Manometer — pressure readings
• Includes probe, carrying case and protective rubber boot
Monoxor™ III Carbon Monoxide Analyzer
• Analyze ambient air and stack gases
• Battery powered (4 AA), hand held
• Measure levels between 0 and 2,000 ppm
• Includes probe and 5' of tubing
• Accuracy = +/–5% of reading
Dual Channel Thermometer
• –50°F to 2000°F (approx.)
• 2 K-type 39" thermocouples
• T1–T2 differential measurements
• Min-Max hold function
• Flip up stand
• Includes protective boot and battery
Humidity-Temperature Meter
• Humidity: 10% RH–95% RH
• Temperature: –4°F to 140°F
• Wet bulb and dew point temp readings
• Data-hold and relative function
• Dual LCD display with bar graph indication
• Includes soft carrying case and batteries
Ordering Information
Testing Equipment
Testing Equipment
Fyrite
Bacharach
5200.0172
24-8250
Fyrite Insight Plus
5200.057
19-8104
Bacharach Monoxor™ III
5200.0171
24-8251
Fyrite Printer
5200.09
TH3000
Bacharach Dual Channel Thermometer
5200.11
TH1800
Bacharach Humidity-Temperature Meter
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 77
Monitors
Electricity Monitors
E.E.D. Watts Up? Monitors
Product comparison
The Watts Up? Monitor will provide
the following information:
Kill-A-Watt
Watts Up?
Watts Up?
Pro
Direct
Corded
Corded
+/–0.2%
+/–3.0%
+/–3.0%
• Current watts, minimum watts,
and maximum watts
Plug
• Power factor
Accuracy
• Cumulative and average watt hours
PC Interface
No
No
Yes
• Cumulative and average cost
Cumulative Watt Hours
Yes
Yes
Yes
Monthly Watt Hours
No
Yes
Yes
Minimum Watts
No
Yes
Yes
Watts
Yes
Yes
Yes
Maximum Watts
No
Yes
Yes
Minimum Volts
No
Yes
Yes
Volts
Yes
Yes
Yes
Maximum Volts
No
Yes
Yes
Minimum Amps
No
Yes
Yes
Amps
Yes
Yes
Yes
Maximum Amps
No
Yes
Yes
Power Factor
Yes
Yes
Yes
Cumulative Cost
No
Yes
Yes
Monthly Cost
No
Yes
Yes
Elapsed Time
No
Yes
Yes
• Line volts, minimum volts, and maximum volts
• Current amps, minimum amps, and maximum amps
The Watts Up? PRO downloads data to a PC, includes
software for graphing, has a payback calculator and
stores power profiles of multiple devices. Includes a
USB cable and software.
Kill-A-Watt Monitor
Plug the Kill-A-Watt Monitor into a threeprong grounded electric outlet. Plug the
device to be evaluated into the top of
the monitor.
• Simple electricity measuring device
• Use on various items to get reading on
wattage, voltage and amperage
LCD Refrigerator /Freezer Thermometer
Get accurate temperature readings with this miniature digital thermometer.
Ideal for use in refrigerators, chillers and deep freezes the thermometer has a range of
-58°F ~ 158°F.
• Unit dimensions: 1.89 x 1.25 x 0.59
• Runs on two 1.5V LR44 batteries included
• Accuracy :±1.8°F
• Easy to read LCD display
Ordering Information
Monitors
Meters and Monitors
Watts Up? Monitors
LCD Refrigerator/Freezer Thermometer
5020.404
5200.701
E.E.D. Watts Up? Monitor
E.E.D. Watts Up? Pro Monitor
5020.403
Kill-A-Watt Monitor
5020.402
|
Kill A Watt Monitor P4400
78 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
LCD Refrigerator/Freezer Thermometer
Measuring Devices
Monitors
All Advanced Power Strips (APS) have the following features and benefits:
• Save energy on home entertainment systems and offices
• Essential devices with programming remain ‘hot’
• Automatically shuts down devices when not in use
• Switch on/off main device, the rest turn on/off Advanced Power Strips
• Eliminate ‘Phantom Loads’
Advanced Power Strips (APS)
TrickleStar Advance Power Strip
• 7 Outlets
• 1 Control Outlet
• 2 Always On Outlets (1 outlet transformer spaced)
• 4 Switched Outlets (1 outlet transformer spaced)
TrickleStar Advance Power Strip Plus
• Includes an InfraRed (IR) motion sensor
APS
• 7 Outlets
• 1 Control Outlet
• 2 Always On Outlets (1 outlet transformer spaced)
• 5 Switched Outlets (1 outlet transformer spaced)
APS Plus
Temperature and Relative Humidity Displays
Stand alone unit that can be wall mounted or used as a table display.
Indoor/Outdoor Thermometer
• Temp range: –58°F to 158°F
• Celsius and Fahrenheit settings
• Retains low and high reading in memory
• Outdoor sensor at the end of a 10' wire
• Runs on one AAA battery included
Indoor Thermometer with
Relative Humidity
• Temp range: –58°F to 158°F
• Relative Humidity range –5% to 95%
• Celsius and Fahrenheit settings
• Retains low and high reading in memory
• Runs on one AAA battery included
Ordering Information
Temperature and Relative Humidity Displays
Advanced Power Strips
7005.601 175SS-US-4CD
TrickleStar 4-Outlet Power Strip
5000.61
TE503
Aube Indoor/Outdoor Thermometer
7005.609
TrickleStar 7-Outlet Power Strip
5000.6
TE513
Aube Indoor Thermometer — Relative
Humidity Display
181SS-US-7XX
7005.613 188LV-US-7XX
TrickleStar 7-Outlet Plus + IR Sensor
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 79
Learning Thermostats
Nest Wi-Fi Learning Thermostat
Nest learns your schedule, programs itself,
and can be controlled from your phone. If you
forget to turn your Nest down when you
leave, Nest will notice and adjust your heating
and/or cooling system so you do not waste
energy. You can also use your phone or tablet
and make changes if you want. Nest lets you
know how you are doing by displaying a leaf
whenever you are saving energy.
• Keeps you comfortable
• Helps you save energy
• Learns your schedule and programs itself
• Will adjust the programming as your
schedule changes
• Can be controlled through your phone
from anywhere
Other Features and Benefits include:
• Self Programming — Makes it easy by eliminating
the need to figure out programming
• Learns Your Schedule — Adjusts to changes
automatically so if your schedule changes,
Nest will know and adjust the program
• Auto Away — Nest will turn your
heating / cooling system down
when no one is home. You can
also adjust the temperature
remotely from your phone
if you want or just check
to see the setting.
• Nest Leaf — A leaf will
appear on the screen
whenever you have
made an adjustment that
will save you energy
Information:
LCD Display:
4 bit color; 320 × 320 pixel display;
2
1.75" D
Warranty:
2 year limited warranty
Sensors:
emperature; Humidity; Far-field activity;
T
Near-field activity; Ambient light
Battery:
Built-in rechargeable lithium ion battery
Power consumption: Less than 0.03kWh per month
Ordering Information
Nest Thermostat
5000.731
|
Nest Wi-Fi Learning Thermostat
80 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Measuring Devices
Programmable Thermostats
Heating and Cooling Electronic Thermostat
• Programmable
• Use for heating only or heating/cooling
• 5–2 day programming, 4 settings per day
• Operates in automatic, manual, or
vacation modes
• Battery operated with low battery
indicator, holds program when changing
batteries
• Wall plate accepts 2, 3, 4, or 5 wires
• Dimensions: 4.8" x 3.25" x 1.125"
Line Voltage Thermostats for Electric Baseboard and Convectors
Programmable — 2 wire
Programmable — 4 wire
• 4,000w @ 240 volts; 2,000w @ 120 volts
16.7 Amp resistive
• 2 wires, SPST
• 7 Day Independent programming,
4 settings per day
• Operate in automatic, manual or
vacation modes
• No battery — protected memory
• 3,600w @ 240 volts. 15 Amp resistive load
• 4 wires, DPST
• 7 day independent programming,
4 settings per day
• Operate in automatic, manual, or
vacation modes
• No battery — protected memory
• Dimensions: 4.8" x 2.7" x 1.0"
• Dimensions: 4.9" x 5" x 1.5"
• Available for 277v systems-special order
Low Voltage Thermostats For Forced Air, Hot Water and Air Conditioning
Programmable
Non-Programmable
• Use for heating only or heating/cooling
• Use for heating only — 2 wire
• Auto change over
• Digital display — extremely accurate
• 7 day independent programming,
4 settings per day
• Replaces standard dial thermostat
• Operate in automatic, manual, or
vacation modes
• Battery operated with low battery
indicator keeps program for 30 seconds
when changing batteries
• Rated 1.5 amps @ 30 volts
• Manual thermostat, plug in a day setting
and a night setting
• Battery operated with low battery indicator
• Dimensions: 3.1" x 3.1" x .08"
• Wall plate accepts 2, 3, 4 or 5 wires
• Dimensions: 3.8" x 4.9" x 1"
Ordering Information
Thermostats
Heating and Cooling Electronic Thermostat
Low Voltage Thermostats For Forced Air, Hot Water and
Air Conditioning
5000.1 5000.59
TH-141-HC-28
Aube Programmable Thermostat
5000.501
TH-135-01
Aube Non-Programmable Thermostat
PSP511C
Lux Programmable Thermostat
Line Voltage Thermostats For Electric Baseboard & Convectors
5000.512 TH-106
Aube Programmable 2 – Wire Thermostat
5000.621 TH-115-A-240D
Aube Programmable 4 – Wire Thermostat
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 81
Alarms and Detectors
Carbon Monoxide Alarms
Hard Wired — New Con. AC-900-0121
• Digital display — continuous monitoring
Plug-In 900-0263
Battery Operated 9C05
• Interconnect with up to 24 units
• Electro-Chemical CO Sensor
• Electro-Chemical CO sensor
• Sealed cover protects sensor during
construction
• Direct plug in with battery back up
• LED indicators for normal and alarm mode
• LED indicators for normal and alarm mode
• Test and reset button
• Battery backup
• Test and reset button
• 85 db alarm
• 85 db alarm
• 85 db alarm
Plug-In 900-0076-01
10 Year Sealed Lithium Battery
• No battery replacement required over the
10 year life of the alarm — versus a typical
alarm battery that last only one year
Battery Operated 900-0146-04
• Direct plug in with battery back up
• Digital readout
• 6' Pull-out cord
• Test and reset button
• Digital display
• 85 db alarm
• Test and reset button
• Peak level memory
• 10x Longer life
• Easy installation and start-up
• 85 db alarm
• Peak level memory
5020.255
5020.993
5020.201A
5020.279
5020.991A
C3010
Ordering Information
Carbon Monoxide Alarms
Carbon Monoxide Alarms
Hard Wired — New Construction
Battery Operated
5020.255 5020.201A 900-0146-LP
Kidde CO Alarm
5020.991A 9C05-LP
Kidde CO Alarm
5000.701
Kidde CO Alarm Lithium — 10 Year
AC-900-0121
Kidde CO Alarm
5020.993
900-0076-01
Kidde Nighthawk
5020.279
900-0263
Kidde CO Alarm
Plug-In
|
82 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
C3010
Measuring Devices
Alarms and Detectors
Information: Carbon Monoxide is a colorless, odorless and tasteless poison gas that can be fatal when inhaled. It inhibits
the blood's capacity to carry oxygen.
CO is a by-product of any organic material that is burned such as oil, gas, propane and wood. Any atmospherically vented
appliance or fireplace in the home has the potential to back draft and introduce CO to the indoor air. Non-electric furnaces,
ranges, clothes driers, water heaters, fireplaces, wood or pellet stoves are all potential sources of CO. Ideally, all appliances
should be directly vented to the outside.
Properly equip your home with carbon monoxide alarms on every level and in sleeping areas. The only safe way to detect CO
in your home is with a CO alarm.
Combination CO and Smoke Alarm
Hard Wire — New Construction
Battery Operated
• Hard Wire 120 VAC Unit
• Ionization sensor for smoke
• Ionization sensor for smoke
• Test and reset button
• Battery backup in case of power failure
• LED indicator lights
• Interconnectable with up to 24 units
• Voice alarm states:
• LED indicator lights
— “Fire! Fire!” accompanied by 85 db alarm
• Voice alarm states:
— “Warning: Carbon Monoxide” accompanied by 85 db alarm
— “Fire! Fire!” accompanied by 85 db alarm
— “Low Battery”
— “Warning: Carbon Monoxide” accompanied by 85 db alarm
— “Low Battery”
5020.9951
5020.994
Strobe Light For Hearing Impaired
• Use with up to 24 hard wired Kidde CO and Smoke/Fire Alarms
• Provides a visual signal
• Meets UL 1971, NEMA and ADA standards
• Bright 177 Candela Strobe
5020.31
Ordering Information
Combination CO and Smoke Alarm
Strobe Light for Hearing Impaired
Hard Wire — New Construction
5020.31 5020.9951
900-0114-02
SL177i
Kidde Strobe
Kidde Combination CO and Smoke Alarm
Battery Operated
5020.994 900-0102
Kidde Combination CO and Smoke Alarm
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 83
Alarms and Detectors
Smoke and Fire Detectors
Wireless Smoke Detector 0919
Battery Operated Smoke Detectors 442-007-02
• Ionization sensor
• Ionization and photoelectric sensors
• Battery powered
• Detects both fast burning and slow smoldering fires
• Interconnects with up to 24 units
• Hush, test and reset button
• When one sounds they all sound
• 85 db alarm
• LED indicates stand-by and alarm condition
• Test and hush button
Battery Operated Smoke Detectors 0914E
• Ionization sensor
• 85 db alarm
• Low battery indicator
Battery Operated Smoke Detectors 900-0136
• 85 db alarm
• Test and hush button
• 10 Year lithium battery — sealed
• Great for multi family, rentals, colleges and public buildings
• Ionization sensor
Battery Operated Smoke Detectors 0915E
• Ionization Sensor
• LED power indicator lights
• Low battery indicator
• Tamper resistant
• Test Button
• Test and hush button
• 85 db alarm
• 85 db alarm
5020.32
5020.272
5020.27
5020.29
5020.271
Ordering Information
Smoke and Fire Detectors
Smoke and Fire Detectors
Wireless
Battery Operated
5020.32 |
0919
Kidde Wireless Smoke Alarm
5020.272 900-0136-003
Kidde Sealed Alarm
5020.29 442-007-02
Kidde Dual Smoke and Fire Alarm Model
5020.27 0914E
Kidde Smoke and Fire Alarm
5020.271 0915E
Kidde Smoke and Fire Alarm
84 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Measuring Devices
Alarms and Detectors
Smoke and Fire Detectors
Hard Wired Smoke Detectors New Construction P12010
Hard Wired Smoke Detectors New Construction 12040
• Ionization and photoelectric sensors
• Ionization sensor
• Interconnect with up to 24 units
• Interconnect with up to 24 units
• Battery backup
• Battery backup
• LED power indicator light
• LED power indicator light
• Hush feature and test/reset button
• Test and hush buttons
• 85 db alarm
• 85 db alarm
5020.291
5020.276
Hard Wired Smoke Detectors New Construction PE120
• Photoelectric sensor
• Interconnect with up to 24 units
• Battery backup
Information: There are two types of smoke sensors
available — Photoelectric and Ionization.
• LED power indicator light
• Test and hush buttons
Photoelectric Sensors detect smoldering, slow moving
fires while Ionization Sensors detect fast moving fires
with flames.
• 85 db alarm
Smoke Detectors that have both sensors are always a good
choice to ensure maximum safety. Installers should check
with local code officials to make sure you are in compliance
with local regulations.
5020.274
Ordering Information
Smoke and Fire Detectors
Hard Wired — New Construction
5020.291 P12010
Kidde Dual Sensor Hard Wire Smoke Alarm
5020.274 PE120
Kidde Photoelectric Smoke Alarm
5020.276 12040
Kidde Ionization Smoke Alarm
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 85
HEPA Filtered Lead Vacuums
HEPA Filtered Lead Vacuums
• Sizes available:
—2.5 gallon
—6 gallon
—10 gallon
—15 gallon
—55 gallon
• Can easily be converted for
dry or wet applications
• Final stage H.E.P.A. filter is
up to 99.99% effective at
0.3 microns which meet or
exceed O.S.H.A. and
E.P.A. standards
LV10
LV02
• 2 year quality assurance warranty
• All vacuums come with tool kits
and filters
LV15
LVW15
Tool Kits that are included with vacuums — see list
LVK100
LVK200
LVK300
Definitions of Terms
High Efficiency Particulate Air (HEPA)
True HEPA filters remove 99.97% of airborne particles down to 0.3 microns in diameter. This standard meets or exceeds both OSHA and
EPA standards for cleaning the air of lead dust.
|
86 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
Health and Safety
HEPA Filtered Lead Vacuums
Vacuum Accessories
Bit Buddie Dust Free Drill Accessories
Rotary Beater Brush
• Vacuums up dust and slurry as it is made
The Rotary Beater Brush is used to clean carpet and furniture
pulling up fine particles and dust.
• Vacuum pressure holds it in place — no clamps necessary
• Save time and money associated with clean up
Ordering Information
CFM
Tank Size
Gals.
Weight
lbs.
Dimensions
Volts/Amps
Tools
Included
Pick Up Type
Nikro HEPA Filtered Lead Vacuums
7000.321
LV02
2 Gallon HEPA Vac
114
2
13
12" x 10" x 21"
115/10.5
LVK100
Dry
7000.321B
LV02
BP00288DV
With Backpack
114
2
13
12" x 10" x 21"
115/10.5
LVK100
Dry
7000.322
LV10
10 Gallon HEPA Vac
112
10
25
16" x 15" x 24"
115/10.5
LVK200
Moist or Dry
7000.323
LV15
15 Gallon HEPA Vac
119
15
53
22" x 20" x 33"
115/13
LVK200
Moist or Dry
7000.324
LVW15
15 Gallon HEPA Wet/Dry
119
15
65
22" x 20" x 45"
115/13
LVK300
Liquid or Dry
Vacuum Accessories
Pack QTY
7000.341 520033P
Collection Bags LV02/10
6
7000.342 520037
Dacron Filter Bag – LV02/10
6
7000.343 862006P
Micro Impaction Filters LV02/10
7000.344 861969
HEPA Filter LV02/10
7000.351 520032P
Collection Bags LV15
7000.352 520210
Dacron Filter Bag — LV15
7000.353 520316P
Micro Imp Filters LV15
7000.354 520307
HEPA Filter LV15
7000.361
D1900
1 3/8" Bit Buddie — With Hose
7000.362
D1905
1" to 4" Bit Buddie — With Hose
861972
11" Rotary Beater Brush
6
10
Bit Buddie
Rotary Brush
7000.391
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 87
Water Conservation Products
INFORMATION: All flow rates measured at 80 PSI
Massaging Adjustable Showerheads
• 2.0 GPM or less
• High-impact plastic body; white or chrome finish
• Adjustable non-aerating spray and pulsating spray
Waterpik Showerhead
• 1.5 GPM
• Three spray settings
• Chrome finish
Hand-Held Showerhead
• 1.5 GPM
• High-impact plastic body
• Adjustable non-aerating spray and pulsating spray
• Chrome finish
• 6' flexible hose
Ordering Information
|
Massaging Adjustable Showerheads
Waterpik Showerhead
3000.163
1.5 GPM Showerhead White
3000.801
3000.164
1.5 GPM Showerhead Chrome
3000.162
1.75 GPM Showerhead White
3000.161
1.75 GPM Showerhead Chrome
3000.081
2.0 GPM Showerhead White
3000.16
2.0 GPM Showerhead Chrome
1.5 GPM Waterpik Showerhead
Hand-Held Showerhead
3000.18
88 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
1.5 GPM Hand-Held Showerhead Chrome
Water
Water Conservation Products
Faucet Aerators
Aerator
• Chrome-plated solid brass body
Swivel Aerator
• Swivel control to direct flow all around the sink in a solid
stream or a wide spray
• Features flow-control lever for temporary water interruption
Miscellaneous Water Saving Products
Teflon Tape
Water Temperature Card
• 0.5" wide x 30" long
• If your water temperature is too high, turning down the water
tank temperature setting will reduce your energy costs
5 Minute Shower Timer
• Large suction cup on the back to adhere the timer to the wall
Toilet bank
• Maintenance-free toilet displacement bag saves up to 0.8 gallons
with every flush
Pipe Insulation
• Flexible elastomeric foam pre-slit for easy installation
• Suitable for use on domestic hot water pipes only
• Tolerates temperatures from 90°F to 180°F
• Comes in a 4 pack of 3' (a total of 12')
• R-value = 2.2
Ordering Information
Faucet Aerators
Miscellaneous Water Saving Products
3010.025
0.5 GPM Standard Aerator — Needle
6800.011
Teflon Tape — Single Application
3010.024
1.0 GPM Standard Aerator — Needle
3030.31
5 Minute Shower Timer
3010.03
1.0 GPM Standard Aerator — Bubble
3040.99
Water Temperature Card
3010.02
1.5 GPM Standard Aerator — Bubble
3020.10
Toilet Tank Bank
3010.31
1.5 GPM Swivel Aerator with Shutoff — Chrome/Black
3010.424
1.5 GPM Swivel Aerator with Shutoff — White/Chrome
Hot Water Pipe Insulation
4000.032
5/8" x 3' Pipe Insulation 1/2" ID x 3/8" wall x 3' length
4000.033
7/8" x 3' Pipe Insulation 3/4" ID x 3/8" wall x 3' length
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 89
Rain Control
Exterior Rain Control
Quick Flash Rain Control Panels
• Effectively seal plumbing, electrical, and HVAC penetrations from rain
• Suitable for residential and commercial applications
• Designed to work under wood and vinyl siding, stucco, brick and stone veneers
• Easy and quick installation
• Eliminate the use of unreliable caulk
• Panels are made of high-grade polyethylene plastic and thermo plastic rubber
Plumbing/HVAC
Flashing Panels
• Non-conductive and impervious to rust and corrosion
Electrical Flashing Panels
Very Important: Quickflash electrical flashing panels are designed to be installed over the specified electrical boxes only
and to be used for vertical structure application only. Please call for a copy of the Electrical Box Cross Reference guide or get
a copy on efi.org/wholesale.
Typical Installations
1
2
3
4
Ordering Information
Plumbing and HVAC Penetration Panels — Case qty = 12 pieces
3570.611
P-50
Plumb Panel 0.5" – 0.75"
3570.612
P-100
Plumb Panel 1.0" – 1.25"
3570.613
P-150
Plumb Panel 1.5" – 1.75"
3570.614
P-200
Plumb Panel 2.0" – 2.50"
3570.615
P-300
HVAC Panel 3" ABS
Lap Siding
3570.616
P-400
HVAC Panel 4" ABS
3570.617
P-600
HVAC Panel 6" Sheet Met
3570.618
P-2PS
Plumb Panel 2 Piece 0.5" – 2"
3570.62
250C
AC Line Set Panel
1 Coat Stucco
3 Coat Stucco
EIFS
Electrical Box and Outlet Panels — Case qty = 12 pieces
|
3570.601
E-SGB
3570.602
E-SGB-A .875"
3570.603
E-SGB-A 1 .375"
3570.604
E-SGR
3570.605
E-3/0 B
3570.606
E-3/0 B-A .875"
3570.607
E-3/0 B-A 1 .375"
3570.608
E-4/0 B
✓
✓
3570.609
E-PC-3/0
✓
✓
3570.610
E-PC-4/0
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
90 Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org
✓
Policies and Procedures
The staff of EFI’s Wholesale Division looks forward to working with our customers to provide the highest quality, energy
efficient products available at competitive prices. We ship orders throughout the United States from two warehouse
locations: Southborough, Massachusetts and Kaukauna, Wisconsin.
Ordering Information
Our hours of operation are from 8:00 am to 5:00 pm (Eastern Standard Time in MA and Central Standard Time in WI),
Monday through Friday. Our customers are always welcome to visit us to get information or pick up orders.
Headquarters 40 Washington Street Westborough, MA 01581 Tel 800/876/0660 Fax 888/440/4219 East Coast Sales Office
1 Willow Street
Southborough, MA 01772
Tel 800/876/0660 X1
Fax 877/313/8808
Mid-West Sales Office
2031 Progress Way
Kaukauna, Wisconsin 54130
Tel 800/962/7015
You can find us on the Web at efi.org/wholesale or email us at [email protected]
Shipping
Every effort is made to ship all wholesale orders on the same day they are placed. Orders are generally shipped via
UPS ground service. US Mail service is also available. Large orders may be shipped via common carrier. Overnight and
second day air services are available for the convenience of our customers. The cost of overnight and second day
service is the responsibility of the customer. When applied, shipping charges are passed through to our customers at
the same rate we receive from our carriers — we do not charge for handling or mark up freight.
Pricing
EFI is committed to maintaining fair, competitive pricing and we welcome feedback from our customers. Prices are
subject to change without notice.
Payment Terms
EFI accepts cash, checks, money orders, MasterCard, Visa, American Express or Discover. We will be happy to set up a
net 30 account for qualifying customers who have filled out a credit application. If necessary, we can ship orders C.O.D.
Shipping charges will be added to the invoice — F.O.B. our dock. In most cases, we will not charge freight for orders
over $3,000 within the continental United States. The exceptions to this are foam canisters and oversized products
such as weatherstripping. Haz-mat fees for products that require them are passed on regardless of order size. In an
effort to help our customers, EFI continues to work with carriers to negotiate the best possible freight rates. These
freight policies are subject to change without notice. EFI reserves the right to charge freight or add fuel surcharges
when necessary as a result of rising transportation costs.
Returns
We want to make sure our customers are satisfied with our products. EFI will honor all manufacturers’ warranties for the
products we sell. If a product does not meet your expectations, please contact us to arrange for an exchange, credit or
refund. Returns are accepted within 30 days for full credit on unused products in original packaging. Please call to get
a Return Materials Authorization (RMA) number before returning product.
EFI cannot accept returns or issue credit on the following products: caulking, sealants, mastic, foams,
and tapes.
|
Orders: 800/876/0660 X1 | efi.org/wholesale | [email protected]fi.org 91
Your Trusted Advisor
Energy Federation, Inc believes it is essential to
encourage people to use our planet’s limited
energy and water resources wisely. We assist
people in these efforts by offering high quality
conservation products and services at affordable
prices while communicating practical, objective
information. We believe that by following this
mission, our work will lead to an improved quality
of life and economic condition.
What’s New Inside:
n
Dozens of LED bulbs and fixtures
n
SIGA Seam Sealing Tapes
n
Panasonic WhisperGreen Select Fans
n
Recessed Can Air Sealing Covers
n
Venmar HRVs and ERVs
n
NEST Thermostat
n
TEC Blower Door and Duct Blaster
n
Advanced Power Strips
n
Flir IR Cameras
n
n
Extech Measuring Devices
EFI is also carrying Commercial
Lighting — ask for details
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement