VISTA-250FBP/V250FBP-24 COMMERCIAL FIRE AND PARTITIONED BURGLARY ALARM PLATFORM Designed to integrate seamlessly with CCTV, access control RF receivers and relays are supported by this extremely and Honeywell’s full range of fire and burglary components, powerful control platform. The VISTA-250FBP has been the new VISTA-250FBP provides the ultimate protection of life designed to mount quickly and easily in an attack resistant and property. The UL listed Commercial Fire and Burglary cabinet, and is available in 12V and 24V models. A Control Platform controls up to eight partitions and supports revolutionary new feature called Panel Linking allows multiple up to 250 zones/points using hardwired, wireless and V-Plex partitions, panels and even buildings, to be armed, disarmed addressable technologies. A diverse line of Honeywell or have status checked…from one location! initiating devices, notification circuits, digital dialers, keypads, FEATURES • Comes standard with eight hardwired zones, expandable to 242 V-Plex addressable points/zones or 250 wireless points/zones • Can control eight separate areas independently (eight partitions) • Supports Panel-Linking: Allows up to eight systems or buildings to be controlled from one central location (using VA8200) • Supports Commercial UL Wireless Fire and Burglar • Two on-board notification (bell) circuits delivering 2.3A @ 12V or 3.4A @ 24V • Automatic smoke detector sensitivity maintenance testing • Four-wire smoke reset using onboard J2 output trigger • Supports Dynamic Signaling for long range radio backup • Supports remote control via the Internet** • Supports Internet Alarm Reporting** • Stores up to 1,000 events and can accommodate 250 user codes • Supports Graphical User Interface consoles • Supports V-Plex addressable VistaKey access control (up to 15 doors and 500 cards)* • Supports Alphanumeric Pager: up to eight different numbers using the VA8201 • Supports up to 16 doors of access control using Vista Gateway Module (VGM)* • Notification Appliance Circuits (two): – Programmable – Temporal code compliant – Individually silenceable • Supports CCTV applications with the new VistaView-100 CCTV Switcher Module • Identifies the point or zone of a fire or alarm using the new FSA-8/FSA-24 Fire System Annunciator • SIA false alarm reduction features: – Exit error logic – Exit delay reset – Cross zoning – Call waiting defeat – Recent close report • Supports commercial hardwired, addressable polling loop and wireless zones • Hardwired zones: – Provides eight style B hardwired zones – Supports N.O. or N.C. sensors – Individually assignable to any partition – Up to 32 two-wire smoke detectors each on zones one and two (64 total) – Up to 50 two-wire glassbreak detectors on zone eight – EOLR supervised for Fire and UL burglary installations * Connects to Honeywell Access’ PassPoint Access Control Systems. Maximum 32 doors. ** When used with AlarmNet-i. • Programmable on-board auxiliary relay VISTA-250FBP/ V250FBP-24 COMMERCIAL FIRE AND PARTITIONED BURGLARY ALARM PLATFORM ADDITIONAL FEATURES • Patented addressable polling loop technology – Supports 242 two-wire zone points – Global polling technology for faster processing – Increased current draw capacity (128mA) – Supervised by panel – Individually assignable to partitions, notification circuit (bell) output or auxiliary relay – 4,000 ft. capability without the use of shielded cable – Extender/Isolation bus module – Two-wire smoke detector zone/group expansion module adds two or four zones – Eight zone – Class A and B extender module – Eight zone – Class B extender module – One zone supervised contact monitor module • UL Listed wireless expansion – Supports up to 250 wireless zones/points using 5881ENHC Receiver – Supervised by control for check-in signals – Tamper protection for transmitters – Individually assignable up to eight partitions – Supports UL864/NFPA approved wireless smoke detectors • Access Control Integration – Full integration with PassPoint Access Control System • Up to 15 doors using VistaKey Access Control • Event reporting • Local printer of access or VISTA related event • Scheduled uploading of events to the central station • Stored events for one call retrieval – Panel operation during download – Uploading equipment list to the central station – Communication to PassPoint via VISTA Gateway Module • CCTV integration – Supports VistaView-100 ECP based CCTV switchers Applications Supported by a diverse line of Honeywell initiating devices, the powerful VISTA-250FBP is the ideal integrated fire and burglary control for applications where a higher level of security is necessary. Some examples of applications include: medical and professional buildings, supermarkets, churches, synagogues, schools, universities, strip malls, factories, warehouses, and larger residences. • Communication – Phone mapping by zone response type – Supports VIP Interactive Phone Voice Module 9500SN Glassbreak Sensor 5192 Series Smoke Detectors 4208U Eight-Zone Expansion Module 4293SN V-Plex Adapter V-Plex Loop 5192 Series Smoke Detectors 5881ENHC Wireless Commercial Receiver 4208SNF Eight-Zone Expansion Module With 2 Class A Zones 6160CR Red Alpha Keypad VistaView-100 CCTV Switcher VistaKey V-Plex Access Control Module Notification Appliances VISTA-250FBP 4204 Relay Module NAC (Bell) Circuit 4204CF Eight Class B Hardware Zones Parallel Printer 4146 Keyswitch Option Serial Printer 5140 LED Communicator Status Module 4100SM Printer Interface Module RS232 Notification Appliances 6220S Printer Phone Line to Central Station Alpha Paging Module 7720ULF Long Range Radio 7835CF Cellular Radio SPECIFICATIONS Installation • Fusing: Battery input, aux. and notification (bell) circuit outputs are protected using PTC circuit protectors. All outputs are power limited The VISTA-250FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations. • Optional 24-volt power supply, PS 24 supplies two 24 VFW, 1.7A full wave rectified, unfiltered outputs Electrical • UL609 Grade A Local Mercantile Premises and Mercantile Safe and Vault • Line seize: Double Pole • Control Panel quiescent current draw: 300mA • Ringer equiv.: 0.7B • Formats: ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics • Backup battery: – 12VDC, 12AH min to 34.4AH max – Lead acid battery (gel type) • Alarm power: 12VDC, 1.7A max for each notification (bell) circuit output Total 2.3A @ 12V • Dual phone line capability (using 5140DLM module) Cabinet Dimensions • Aux. standby pwr: 12VDC, 1A max • 18˝ H X 14.5˝ W X 4.3˝ D • Total power: 2.3A at 12VDC, 3.4A at 24VDC from all sources Environmental • Standby time: 24 hours with 1A standby load using 34.4AH battery • Storage temp: 14° F to 158° F (-10° C to 70° C) • EMI: Meets or exceeds the following requirements: – FCC Part 15, Class B Device – FCC Part 68 – IEC EMC Directive Agency Listings Burglary Main Dialer • Primary power: 18VAC @ 72VA ADEMCO No. 1451 • Humidity: 85% RH • UL611/1610 Grades A, AA, Central Station • UL365 Grades A, AA Police Connect Fire • UL864/NFPA72 Local, Central Station and Remote Station • Factory Mutual • California State Fire Marshal • MEA • UL985 • Operating temp: 32° F to 122° F (0° C to 50° C) Manual Pull Stations 5140MPS - 1* 5140MPS - 2* 4190SN V-Plex Two-Zone Expander 4193SN Serial Interface Module ECP-Bus 4944SN Addressable Recessed Mount Contact Q2260SN Multiplex DUAL TEC® Motion Detector Tamper Switch* Flow Switch* Low Temp Switch* 5881 Wireless Receiver (Max Two) 5808W3 Photoelectric Smoke/Heat Detectors 5800 Series Wireless Devices 5808W3 Photoelectric Smoke/Heat Detectors 5816 Door/Window Miniature Transmitter 4204CF Supervised NAC Module 4297 Isolation/ Extender Module 5890 Wireless PIR 4209U Group Zoning Module 4190SN Symphony Notification Appliance Supports Up To 64 Conventional Two-Wire Smoke Detectors 5869 Commercial Hold-Up Switch 5817CB Wireless Commercial Transmitter PassPoint Supports Up To 64 Conventional Two-Wire Smoke Detectors VGM (PTVGM) VISTA Gateway Module VISTA-250FBP Panel Linking Module VISTA-250FBP Panel Linking Module V-Plex Two-Zone Expander VISTA-250FBP/V250FBP-24 COMMERCIAL FIRE AND PARTITIONED BURGLARY ALARM PLATFORM SPECIFICATIONS Auxiliary Devices V-Plex (Addressable) Smoke Detectors • 5849 – Glassbreak Detector • 4204 – Relay Module, four form C contacts • 5192SD • 4192SD • 5890 – PIR • 4192CP • 192SDT Commercial Wireless Devices • 4192SDT • 4192CPM • 5808W3 – Photoelectric Smoke/Heat Detector • 4204CF – Two supervised output circuits • 5881 Series – RF receiver supporting 5800 wireless detectors • 4192SDTM • 6220S – System printer used with 4100SM serial module • 998MX • 6160CR – Red Alpha Keypad • FSA-8 & FSA-24 annunciator modules • VA8200 – (PLM) Panel Linking Module • VA8201 – (APM) Alpha Paging Module Two-Wire Smoke Detectors Conventional • System Sensor smoke detectors V-Plex Passive Infrared Detectors • 4275EX-SN • 4278EX-SN • 5817CB – Wireless Commercial Transmitter • 5869 – Hold up Transmitter V-Plex (Addressable) Contacts • 4939SN-WH • 4944SN-WH • 5881ENHC – Commercial Fire/Burg Receiver • 4959SN Access Control V-Plex Glassbreak Detectors • VistaKey V-Plex (addressable) Access Control • FG1625SN • VistaKey-SK Starter Kit VISTA Interactive Phone Module Horn/Strobes • 5809 – Wireless Heat Detector • 4286 Voice Module • VistaKey-EX Expansion Kit Optional 24V Power Supply • VGM Vista Gateway Module to PassPoint Access Control • PS24 – 24V power supply – 3.4A • Pro-Watch Long Range Radio • WIN-PAK (PE or SE) • 4101SN Single Relay/Zone Module • Long Range Radio 7720ULF-XX, 7835C, 7835CF, 7845C CCTV • 4190SN Remote Point Module – two zones Upgraded software • System Sensor Notification Appliances Manual Pull Stations • 5140MPS-1 • 5140MPS-2 V-Plex (Addressable) Devices • Upgraded Compass Downloader Windows compatible • 4193SN Two Zone Serial Interface Module • 4208SNF Class A/B Expander Module • 4208U Loop Expansion Module – eight zones • 4209U Group Zoning Module – two/four zones • 4293SN One Zone Serial Interface Module Wireless Devices Alarm Communications • Graphical user interface with Internet capability • 5804 – Wireless Key • Internet Remote ControlNetworking Module • 5804BD – Bidirectional Key • Internet Alarm Communicator (7845i) • 5804BDV – Bidirectional with voice • 7845GSM – Digital Cellular Communicator • 5816 – Door/Window Transmitter • 5819 – Shock Sensor • 4297 Isolation/Extender Module • VistaView-100-CCTV Switcher Module • 5827BD – Bidirectional Keypad • 7845i-GSM – Internet and Digital Cellular Communicator • GSMCF/iGSMCF – Commercial Fire Communication Kits • VSI Module ORDERING VISTA-250FBP V250FBP-24 Commercial Fire and Partitioned Burglary Alarm Platform 12V Model Commercial Fire and Partitioned Burglary Alarm Platform 24V Model Automation and Control Solutions Honeywell Security & Communications 2 Corporate Center Dr. Suite 100 P.O. Box 9040 Melville, NY 11747 www.honeywell.com L/V250FBP/D September 2008 © 2008 Honeywell International Inc.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project