Catalogue Sheet: C8SR10 Series
C8SR10 Series
All Metal “Sortie” Sign
Prepared by:
Typical specifications
• Metal legend panel with red letter panel
Supply and install the Emergi-Lite® C8SR10 Series LED “SORTIE’’ Exit
Signs. The equipment shall operate with universal two-wire AC input
voltage of 120VAC to 347VAC at less than 1.5W and universal two-wire
DC input voltage from 6VDC to 24VDC at less than 1.5W for single or
double face signs.
• Metal construction using Canadian cold-rolled steel with baked
enamel finish – will not yellow
• Universal mounting – end, wall or ceiling
• Easy access to wiring entry for all mounting options
The sign shall be suitable for wall, end or ceiling mount. The faceplates
shall be constructed of steel and shall come standard with knockout
chevrons. The frame shall be of a one-piece steel construction.
• Canopy mounting system designed specifically for ease of
• Standard field-selectable directional knockout chevrons
The light source shall be light emitting diodes (LED). The LED lamps
shall provide illumination in normal and emergency operation and
shall be mounted inside the exit housing, not on the face.
• Long life, energy efficient ALINGAP technology light source
• Energy efficient – consumes less than 3W
• Normal AC and emergency DC operation – 120V to 347Vac and
6V to 24Vdc input
• CSA certified, meets or exceeds CSA 22.2 No. 141. requirements
• Metal construction using Canadian cold-rolled steel
• Long-life, energy-efficient ALINGAP technology LED light
source completely enclosed in acrylic module
Red LED technology shall be ALINGAP. An LED-sensitive diffuser shall
be mounted behind the legend to provide the 6” high by 3/4” stroke
letters with even illumination.
The Exit Sign in a Self-Powered configuration shall stay illuminated
during emergency operation for at least 60 minutes upon AC failure.
The Exit Sign shall be CSA-C860 approved and meets CSA 22.2 No. 141.
The equipment shall be Emergi-Lite® Model:
• Also available with power pack; see SR catalogue sheet
Wire guards
Dimensions are approximate and subject to change.
Wall Mount
End Mount
Ceiling Mount
71/2” [19.1 cm]
83/4” [22.3 cm]
45/8” [11.7 cm]
71/2” [19.1 cm]
18” [45.7 cm]
21/8” [5.3 cm]
191/8” [48.5 cm]
POwer consumption and unit rating
AC Specs
DC Specs
AC/DC standard, red
120 to 347VAC
Less than 1.5W
6 to 24VDC
Less than 1.5W
AC/special DC, red
Less than 2.5W
36 or 48 or 120VDC
Less than 2.5W
Self-Powered red
120 to 347VAC
Less than 3W
Nickel-Cadmium battery
Minimum 60 minutes
ordering information
C8SR10= universal mounting LED
W= factory white
B= black
TG= textured grey
supply and voltage
-U= 120/347Vac, 6/12/24Vdc
-I= Self-Powered 120/347Vac
-EM120-2W= 120Vac, 120Vdc
2 wires
-U36= 120/277/347Vac, 36Vdc
-U48= 120/277/347Vac, 48Vdc
-U120= 120/347Vac, 120Vdc
Other colours available.
Consult your sales
-TP= tamper-proof screws
-VRTP= v andal resistant shield with tamper-proof
990.0119-E= tamper-proof bit*
*One bit needed per order.
** Indicate single or double face
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF