Avermedia | AVerDiGi EB3004 NET+ | CMS Software User Manual

CMS Software User Manual
CMS Network Video
Surveillance Software
User Manual
1
Announcement
This manual may not accurately describe on some technical details or contain some printing error.
If you could not solve problems occurred in the application process by the user manual, please call
at our technology department for relevant operational methods. This manual is subject to change
without further notice.
2
Content
1 Introduction .............................................................................................................................................4
1.1 Operating Environment ....................................................................................................................4
1.2 Convention ........................................................................................................................................4
1.3 Installation Instructions....................................................................................................................4
2 Installation and Uninstall ........................................................................................................................5
2.1 Installation .........................................................................................................................................5
2.2 Uninstall.............................................................................................................................................6
2.3 Repair.................................................................................................................................................6
3 Operation and Use...................................................................................................................................7
3.1 User Login .........................................................................................................................................7
3.2 Software Interface Introduction .......................................................................................................7
4 Device Management ................................................................................................................................9
4.1 Device Configuration ........................................................................................................................9
4.1.1 NVR Addition ..............................................................................................................................9
4.1.2 Normal IP mode ........................................................................................................................10
4.2 Zone Configuration .........................................................................................................................10
5 Image Preview........................................................................................................................................11
5.1 Non-polling Preview ........................................................................................................................11
5.1.1 Node Play ..................................................................................................................................12
5.1.2 End Play ....................................................................................................................................12
5.2 Preview Control ...............................................................................................................................12
5.3 Recording and Capture ..................................................................................................................12
5.3.1 Real-time Recording .................................................................................................................12
5.3.2 Motion Detection Recording ....................................................................................................13
5.3.3 Other Functions ........................................................................................................................13
6 Local Playback.......................................................................................................................................14
6.1 Local Playback ................................................................................................................................14
6.1.1 Record Searching .....................................................................................................................14
6.1.2 Local File Playback...................................................................................................................15
6.1.3 Events Playback .......................................................................................................................15
6.1.4 Playback Control .....................................................................................................................15
6.2 Remote Playback ............................................................................................................................16
6.2.1 Record Searching .....................................................................................................................16
6.2.2 Remote File Playback...............................................................................................................17
6.2.3 Events Playback ......................................................................................................................17
6.2.4 Playback Control .....................................................................................................................17
6.3 Remote Configuration.....................................................................................................................18
6.3.1 IP Camera Remote Configuration............................................................................................18
6.3.2 NVR Remote Configuration......................................................................................................18
3
1 Introduction
1.1 Operating Environment
OS: Microsoft Windows 2000 or above version
CPU: Intel Pentium IV 3.0 GHz or above
RAM: 1G or above
Display: Support 1024×768 resolution or above
1.2 Convention
1.
2.
3.
4.
5.
6.
In this manual in order to simplify the description, making the following convention:
NVR, IP camera are named as device;
‘Click’ is ‘Single Click the left mouse button’;
‘Double Click’is ‘Double Click the left mouse button’;
‘Right Click’is ‘Single Click the right mouse button’;
Some pictures are schematic diagrams, please subject to the practical software interface;
1.3 Installation Instructions
CMS supports Windows 7 Home, Ultimate, Enterprise edition and Windows XP SP3 or above edition.
XP System Installation Steps:
1. Install net framework3.5
2. Install vcredist 2008(VC 2008)
3. Install client RVC9X
Win 7 System Installation Steps:
1. Install vcredist 2008(VC 2008)
2. Install client RVC9X
Note: This CMS software can be operated in the 32-bit system.
4
2 Installation and Uninstall
2.1 Installation
Double Click setup .exe file,
open CMS Setup Wizard, Click ‘Next’.
Choose Installation Path, click ‘Next’,
finish the installation according to the wizard.
Launch the software
5
2.2 Uninstall
Enter software uninstall interface, finish the uninstall according to the wizard.
2.3 Repair
Double click setup file, finish the repair according to the wizard. Please choose original data overwrite or not
at the last step.
6
3 Operation and Use
3.1 User Login
Login page will appear as follow. The original user name: admin; password: admin
3.2 Software Interface Introduction
Software interface is divided into six main parts, as below:
Software Interface Description:
Zone
Description
Zone
Description
System bar
Tab bar
Device list/groups
Real-time play panel
Control panel
Alarm information list
7
System bar:
Button
Description
User switching, click to switch the login user
Lock button, click again to unlock
Hide button, click to hide the software into system tray
Exit button
Tab bar: includes the software functions module
Menu
Description
Preview
Enter preview interface
Playback
Enter playback interface, user can choose remote playback, local playback, event
playback and motion detection
Configuration
Enter configuration interface
Help
Help button, it will show software manual and edition info
Device list/groups:
Display mode
Description
List mode
Show the devices according to user configuration level
Real-time play panel:
Real-time play panel descriptions as below:
Zone
Description
Zone
Description
Play window
Alarm lamp
Basic function button
Extended function button
8
4 Device Management
Please add the device first, click ‘Config’ to enter device management interface.
Interface descriptions as below:
Zone
Description
Description
Zone
Device list display area
Device info display area
Online NVR list
Online IP camera list
Navigation bar
4.1 Device Configuration
4.1.1 NVR Addition
Drag the Online list NVR into Device list.
Input the Device name and description in the
Device info area, then click ‘OK’ button.
Drag the Online list IP camera into the
corresponding channel of the Device list NVR,
then click the ‘OK’ button
Note: If the IPC is added into Device list as
IPC mode or other NVRs in the list add this
IPC, then the IPC can’t be added into this
NVR channel.
9
4.1.2 Normal IP mode
Drag the Online list IP camera into Device list, input the IP address,
User name/Password, Port, Device type, click ‘OK’ to finish the addition.
Note: If the IP camera is in the NVR channel, it can’t be added into
Device list.
Interface descriptions as below:
Item
Descriptions
Name
User-defined device name
Device Type
Device automatic acquisition type
IP Add
Device IP address
Port
Device port, default 554
User Name
Device name
Password
Device password
Discrible
Descriptions of NVR or IPC
DNS Name
Device domain name
4.2 Zone Configuration
Right Button Area name to add the sub zone. Input Area name and click ‘OK’
Note: The TAB character and spacing in the Area name will be automatically removed. Area name can’t
include ‘%’, It also can’t be Null.’
10
5 Image Preview
Click ‘Preview’ to enter preview interface. The default display window is 4CH. User can click ‘Split screen’
button to choose multi-images, maximum support 9CH.
Preview interface descriptions as below:
Button
Description
Button
Description
Play
Record
Capture
Stop
Split screen
5.1 Non-polling Preview
5.1.1 Node Play
1. Double click preview channel to play
Choose 1CH window of the play panel, double click the channel node of the device tree. The chosen play window
will display the real-time video.
11
2. Click ‘Play’ button to play
Choose 1CH window of the play panel, click the device of the device tree, then click the ‘Play’ button.
The chosen play window will display the real-time video.
3. Main Stream play
Choose 1CH window of the play panel, right click the device to choose main stream. Double click the
device to display main stream play.
4. Vice Stream play
Choose 1CH window of the play panel, right click the device to choose vice stream. Double click the device to
display vice stream play.
5.1.2 End Play
Click ‘Stop’ button to stop play
The icon of the real-time play channel is as
become
. If the device is offline, the icon is as
. User can click the ‘Stop’ button to stop the play. The icon will
.
Right click image to stop play
Right click the real-time play window, choose ‘Stop Play’ to stop the real-time play and the channel icon will
become
5.2 Preview Control
Click
to choose multi-image display.
5.3 Recording and Capture
Record and capture need the corresponding channel under real-time status.
12
5.3.1 Real-time Recording
Save Path Configuration
Click ‘Config’ to enter configuration management window, click ‘Video Configuration’ button to enter
saving configuration window. User can set the saving disk, video file size, minimum reserved space, minimum
cycle video space and default folder in the configuration window. Click ‘Save’ button to save the
settings(Video file and Image are saved in the default folder).
Real-time Recording
Choose 1CH real-time play window。
Click
to start record.
The icon will display on the screen.
Click
againto stop record.
5.3.2 Motion Detection Recording
Right click the play window, choose ‘Start Fortify’.
If the camera monitors a moving object, there will
be a motion detection record. The icon
and
words information of the current status will be
displayed on the screen.
5.3.3 Other Functions
There are 4 alarm types, choose the types you need
according to the practical application. There will be an
alarm after these conditions are triggered.
13
6 Local Playback
6.1 Local Playback
Click
to enter local play interface.
Local Playback descriptions as below:
Zone
Description
Zone
Description
System bar
Device list tree
Playback window
Search panel
Play control panel
Time axis panel
6.1.1 Record Searching
Step 1: Choose the searching type and time of the file.
Step 2: Click
to search the record file. It will display on the time axis panel if it
accords with the search criterias.
Note: Red shows record file and Blue shows motion detection information.
14
6.1.2 Local File Playback
Click
to play the record after the searching. User locate the record on the time axis. Choose the playback
channel and double click the channel device. If it exists record file, it will replay from the first record file. Note:
Single channel playback supports 2x-1/2x,4x-1/4x,8x-1/8x fast forward and backward, Two channels or above
only support 2x-1/2x.
6.1.3 Event Playback
After record searching, choose
, then click
to start the playback. User can locat the
file on the time axis.Choose the playback channel and double click the channel device. If it exists record file, it
will replay from the first record file. Note: Single channel playback supports 2x-1/2x,4x-1/4x,8x-1/8x fast
forward and backward, Two channels or above only support 2x-1/2x.
6.1.4
Playback Control
Playback control bar descriptions as below:
Button
Description
Button
Description
Pause
Volume control
Stop
Play
15
6.2 Remote Playback
Click
to enter remote play interface.
Remote playback interface descriptions as below:
Zone
Description
Zone
Description
System bar
Device list tree
Playback window
Searching panel
Play control panel
Time axis panel
6.2.1 Record Searching
Step 1: Choose the searching type and time of the file.
Step 2: Click
to search the record file. It will display on the time axis panel if it accords
with the search criterias.
Note: Red shows record file and Blue shows motion detection information.
16
6.2.2 Remote File Playback
Click
to play the record after the searching. User locate the record on the time axis. Choose the playback
channel and double click the channel device. If it exists record file, it will replay from the first record file.
Note: Single channel playback supports 2x-1/2x,4x-1/4x,8x-1/8x fast forward and backward, Two channels or
above only support 2x-1/2x.
6.2.3 Event Playback
After record searching, choose
, then click
to start the playback. User can locat the file
on the time axis. Choose the playback channel and double click the channel device. If it exists record file, it will
replay from the first record file.
Note: Single channel playback supports 2x-1/2x,4x-1/4x,8x-1/8x fast forward and backward, Two channels or
above only support 2x-1/2x.
6.2.4 Playback Control
Playback control bar descriptions as below:
Zone
Description
Zone
Description
Stop all
Play
Stop
17
6.3 Remote Configuration
Click ‘Device Configuration’ in the ‘Config’ interface.
6.3.1 IP Camera Remote Configuration
Double click the IP camera of the device list.
The configuration interface will be displayed.
User can set the IP address, DDNS and other
parameters of the camera.
6.3.2 NVR Remote Configuration
Double click the NVR of the device list.
The configuration interface will be displayed.
User can set the IP address, DDNS, time
settings, user management and other
functions of the NVR.
18
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising