seating - Caster Town
OFFICE
PRODUCTS
Seating & Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1589-1597
Computer Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1598-1602
Safes & Key Cabinets . . . . . . . . . . . . . . . . . . . . . . 1603, 1612-1613
Filing & Storage Systems . . . . . . . . . . . . . . . . . . . . . . . .1604-1611
Office, Task Lights & Magnifiers . . . . . . . . . . . . . . . . .1614-1615
General Office Supplies . . . . . . . . . . . . . . . . . . . . . . . . .1616-1619
Cafeteria Supplies, Water Coolers & HVAC. . . . . . .1620-1625
RG12_IntroPages_Eng.indd 1588
12-07-31 11:52 AM
SEATING
THE OFFICE CHAIR
ONE OF THE MOST IMPORTANT COMPONENTS OF A PROPER WORKSTATION IS THE OFFICE CHAIR!
The type of work being performed in the office often dictates what kind of chair is required. The size of the person doing the work might also
affect the proper choice. This guideline is intended for most users, but accomodating the extremes in a person's height, weight, physical disability,
etc., is a fact of life and must be part of the planning process.
• The chair should have a seat back with lumbar support capable of both up-and-down and
front-and-back adjustment. The seat back should provide support to both the lower back
and the shoulders and enable the person to sit comfortably upright without slouching
• To accomodate the height of the user, the chair height with respect to the floor should be adjustable
• The seat pan should be capable of tilting and it should have a contoured or waterfall front
• Hip angle: 90°-120°
• Knee angle: 90°-130°
• Ankle angle: 100°-120°
• The front edge of the seat should curve away and down from the back of the person's legs
to promote circulation in the lower legs. Tilting transfers weight from your hips to your legs,
encouraging normal back curve and reducing pressure on the discs in the lower spine
• The seat pan and backrest should be upholstered and cloth covered with a fabric that is breathable
. Seat padding should not compress more than one inch when an individual is seated
• The height of the armrests needs to be adjustable with respect to the seat pan. Adjustable
height arm rests relieve tension in the upper back, neck, and shoulders, by allowing the
user's arms and wrists to be in parallel position. They also provide resting planes
• To accomodate the breadth of the user's lower torso, the office chair armrests should be capable
of in and out adjustment and that adjustment needs to be independent of the seat pan
• The chair should be capable of swiveling at least 360°
• To prevent the possibility of tipping, the chair should have five casters. The type of
casters depends on the flooring material. Use hard casters for carpeted floors.
Use soft casters for hard wood vinyl or when used on chair mats
• Look for chairs with a built-in tilt tension mechanism that controls the rate and ease with
which the chair reclines to different weights and strengths of the user. This allows the user
freedom to rock/shift in the chair, while not disturbing the original ergonomic settings
1405 & 1410 PREMIUM SERIES CHAIRS
OE744
Offers all you require in a task and operator chair. From molded foam
cushions to "one touch" ergonomic chair controls.
Onyx
• Gas lift height adjustment
• Back height and depth adjustment
• Seat and back angle adjustment on 1410 Series
• Optional arms and stool kit available
• Dual wheel carpet casters
Model No.
Onyx
Charcoal
OE744
OE745
OE746
OE747
OE748
OE749
Charcoal
Seat Dimensions
W" x D" x
H"
17 1/2 x 18 x 17-22 1/2
17 1/2 x 18 x 22-27
17 1/2 x 18 1/2 x 18-23 1/4
Description
1405 Series chair
1405 Series w/stool kit
1410 Series multi functional
Back Dimensions
W" x H"
16 1/4 x 14
16 1/4 x 14
17 1/2 x 15
OE748
w/option
OC323
Price
/Each
192.17
256.53
254.75
TASK CHAIRS & ECONOMICAL STENO CHAIRS
•
•
•
•
•
•
•
Pneumatic height adjustments
Backrest height adjustments
Five prong poly on steel base
Dual wheel carpet casters
Stool kit available
Optional arms
Optional glides (recommended with stool kit)
Model No.
Onyx
Charcoal
Description
ECONOMICAL STENO CHAIRS
OC310
OC309
w/o arms
OC312
OC311
w/T-arms
OE093
OE092
w/stool kit
TASK CHAIRS
OE095
OE094
w/stool kit
Onyx
Charcoal
OE095
Seat Dimensions
W" x D" x
H"
Back Dimensions
W"
x
H"
Wt.
lbs.
Price
/Each
18 x
18 x
18 x
17
17
17
x
x
x
17-22
17-22
22-27
16 1/2
16 1/2
16 1/2
x
x
x
11 1/2
11 1/2
11 1/2
30
32
35
186.82
279.78
251.18
18
17
x
24-30
16 1/2
x
13 1/2
35
319.11
x
OC311
with stool
kit (OA269)
R33113E
OPTIONS FOR CHAIRS
Model No. OA271
Price/Each $74.18
Loop Arm Kit (width adjustable)
OFFICE
PRODUCTS
1589-1597_Eng.indd 1589
INSTRUMENTS,
SCALES &
ELECTRICAL
Model No. OC323
Price/Each $92.96
T-Arm Kit (width & height adjustable)
SHIPPING &
PACKAGING
TOOLS &
EQUIPMENT
Model No. OC822
Price/Each $102.79
Chrome Foot Ring
Model No. OA269
Price/Each $64.36
Stool Kit
WELDING &
METALWORKING
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1589
12-07-23 8:32 AM
SEATING
UBER™ BIG & TALL CHAIRS
•
•
•
•
•
•
•
Designed especially for the big and tall person
500-lb. capacity
360° swivel seat with pneumatic height adjustment
Tilt lock and tilt tension on a 5-star, over-sized base
Dual hooded 2" diameter casters for added stability
Seat dimensions: 22 1/4" W x 20 3/4" D
No tools required for assembly (except for the optional arms OJ995)
Model No.
Back Dimensions
Black
Grey
Description
Seat height"
W"
x
H"
OJ990
OJ991
High back
19 1/2 – 23 1/2
23
x
23
OJ992
OJ993
Mid back
18 1/2 – 22 1/2
23
x 19 3⁄4
REPLACEMENT PNEUMATIC CYLINDER FOR SHORTER SEAT HEIGHT
OJ994
Reduces overall seat height to 17 - 21"
OPTIONAL ARMS
OJ995
T-Pad, set of 2, black
Price
/Each
504.48
495.00
60.25
119.79
OJ990 shown w/OJ995
OJ993
PREMIUM SERIES MULTI-FUNCTION OPERATOR CHAIRS
•
•
•
•
•
•
•
•
•
•
•
New concept fabric design
Heavy-duty multi-tilt mechanism with tension adjustable infinite lock tilt
Forward tilt with lockout option
Independent back angle adjustment
Ratchet backrest height adjustment
Heavy-duty steel base with plastic cover
Injection molded foam cushions
Dual wheel carpet casters
Pneumatic gas lift height adjustment: 18"- 23"
Seat dimensions: 18" W x 18" D x 18-23" H
Back dimensions: 17" W x 21" H
Grey
OF194
OF190
OF182
Model No.
Black
Burgundy
OF195
OF193
OF191
OF189
OF183
OF181
Blue
OF192
OF188
OF180
Description
Operator chair
Operator chair w/T-arms
Operator chair w/loop-arms
w/adjustable T-arms
w/loop arms
Standard
ACTIV® SERIES A-95 MESH CHAIRS
SUPPORTECH
ERGONOMIC CHAIRS
• Flexibly adjusts to support your back as you move in your seat while working
• Allows airflow to your back to keep you cool and comfortable
• Feels soft and comfortable, not rigid, against your back
• Mesh contoured shaped back
• Black fabric on seat
• Pneumatic seat height adjustment between 18 1/2" and 21 1/2"
• Back is 19" high and 18 3/4" wide
• Seat is 20" wide and 20" deep
• Fixed armrests
• Tilt feature with lockout
• Tension adjustment
• Chrome base and gas cylinder
• Carpet casters
Model No. OK210
Price/Each 186.82
• Multi-tilt control for custom adjustment
• Gas lift height adjustment
• Tension adjustable swivel/
tilt with locking free float
• Height adjustable contoured backrest
• Height adjustable armrests
• Five prong plastic (glass reinforced) base
• Dual wheel carpet casters
• Seat dimensions:
20" W x 18 1/2" D x 19-24" H
• Back dimensions: 19" W x 21" H
Onyx
Price
/Each
341.46
434.42
415.64
ACTIV® SERIES LEATHER MANAGER'S CHAIRS
Charcoal
•
•
•
•
Model No.
Onyx
Charcoal`
OC359
OC360
Thick padded and contoured seat and back for superior comfort
Seat is 19 1/2" width and 20" depth
Back is 26" height and 20" width
Back features built-in lumbar support which allows
increased relaxation of the back
• Contoured armrests for increased support
• Pneumatic seat height adjustment from 18" to 22"
• A tilt mechanism with lockout and tension adjustment control knob
• Contoured backrest shaped to fit the contours of the body
• Soft-touch leather like fabric
• Fixed armrests
Model No. OK390
Price/Each 276.20
Price
/Each
551.40
LEATHER CHAIRS
• High back tilter with pneumatic seat
height adjustment from 16" to 20"
• Upright position tilt lock
with tension control knob
• Dual wheel carpet casters
for easy movement on carpet
• Black leather seat with
mock leather back and trim
• Ideal for home or office
• Dimensions:
25 1/2" W x 28" D x 43" H
Model No. OK049
Price/Each $187.96
MATERIAL
HANDLING &
STORAGE
1589-1597_Eng.indd 1590
JANITORIAL &
MAINTENANCE
• Tilt mechanism with lockout feature and tension adjustment
• Height and depth adjustable lumbar support
between 18 1/4" to 21 1/2"
• Optional height and tilt adjustable headrest
• Back is 23" height and 20" width
• Seat is 20" width and 19 1/2" depth
Model
• Height and width adjustable armrests
No.
Description
• Fabric options on seat and optional headrest
OK208
Mid Back Mesh-Chair
• Soft touch mesh on seat as standard fabric
ON573
Head rest
• Black base and gas cylinder
SAFETY
EQUIPMENT &
SUPPLIES
WELDING &
METALWORKING
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
Price
/Each
311.96
35.75
INSTRUMENTS,
SCALES &
ELECTRICAL
R33114E
1590
ACTIV® SERIES MID-BACK MESH-CHAIRS
OFFICE
PRODUCTS
12-07-23 8:33 AM
SEATING
STEEL BASE SWIVEL STOOLS
DELUXE SWIVEL STOOLS
•
•
•
•
•
•
• These padded stools will provide workers
with maximum comfort and support
• 360° swivel motion is ideal for workers who
have repetitive side to side movement
• Seat easily adjusts to your selected height, just raise or
lower the steel rod and lock securely in place
• 2" foam over a 1/2" plywood
base and 1/2" foamed backrest
• All-welded frame constructed
of 1" diameter 16-gauge steel
• 3/4" circular tube footrest
• Four leg cluster design has a 22"
spread giving them optimum stability
• Black vinyl upholstery with
a royal grey frame
• Optional casters available
5" pneumatic lift of 25" to 30", for easy height adjustment
Five legs and an all-welded steel base, gives optimum stability
16-gauge, 1" diameter steel legs
Full 360° rotation
Colour: Powder coated black Santex
Optional casters are available
OJ905
Model OJ905 has an ergonomic self-skinned
molded polyurethane foam seat and back,
features lumber support, waterfall seat and
4-leg frame for superior comfort and durability.
OJ975
OJ974
OJ973
FC670
Model
No.
OJ973
OJ974
OJ975
OJ976
Upholstery seat
Dimensions"
Vinyl & Foam-Padded
19 x 17
Seat & Back
Polyurethane Seat & Back
18 x 17
Premium Self Skinned
19 x 18
Polyurethane Seat & Back
Optional Set of 5 Tile Casters (Includes Leg Insert Socket)
Wt.
lbs.
33
Price
/Each
236.18
Model
No.
OJ905
FC670
FC675
33
35
300.50
396.98
SWIVEL STOOLS
40.15
INDUSTRIAL SEATING
• Features a full 8" of pneumatic lift while seated
• Exclusive extension tube provides an adjustable height range of 17" to 35"
• Seats and backs are microcellular self skinning polyurethane
foam which inhibits punctures, tears and moisture absorption
• Large 26" dia. five leg steel base with 2 1/2" diameter glides
ensure stability and safety even at the highest levels
• Large wide angle footrests make it easy to step up into seat
FC680
Features 22° back
angle and 10° seat tilt
adjustment w/double
paddle handles.
FC681
Features 3" back rest
height and 3" back
rest depth adjustment.
Assembly required.
Adjustable
Height"
25-31
25-31
Set of 4 casters
• Seats made of 19-gauge
embossed steel with 1/8"
tempered hardboard inlay
• 1" diameter, 16-gauge steel
frame all-welded tubing
• Circular 18-gauge
footrest guarantees
comfort and stability
• Heavy-duty rubber
cushioned steel
glides protect floors
• 1" x 14 1/2" long
steel adjustment
stem for easy height
selection on all units
• 9 1/2" x 15 3/4" backrest
is 4-way adjustable
• Optional casters available: FC675
• Models FC673 and FC674
come with a padded seat
Seat
Dimensions"
19 x 17
19 x 17
-
Wt.
lbs.
33
33
2
FC665
FC661
FC673
FC658
Model
No.
FC658
FC661
FC665
FC673
FC674
FC675
Step 2
Open Tapered Collet
Adjusts to any
position up to 10''
Dimensions"
Seat"
Backrest"
18 1/2 x 17
15 3/4 x 9
16 1/4 x 16 1/4
14 1/2 x 9
No. of
Footrests
3
1
Price
/Each
850.31
579.01
R33115E
Model
No.
FC680
FC681
OFFICE
PRODUCTS
1589-1597_Eng.indd 1591
INSTRUMENTS,
SCALES &
ELECTRICAL
Wt.
lbs.
19
28
27
19
22
2
Price
/Each
145.73
200.00
220.10
189.95
189.95
28.63
•
•
•
•
Step 3
Drop into
base
Lift
out
Seat
Dimensions"
14
14
14 1/2 x 15
14
14
-
POLYURETHANE SWIVEL STOOLS
HOW WAVE TUBE TECHNOLOGY WORKS
Step 1
Adjustable
Height"
22-28
22-28
17-23
20-26
25-31
Set of 4 casters
Price
/Each
435.99
250.25
28.63
SHIPPING &
PACKAGING
TOOLS &
EQUIPMENT
360º swivel
Constructed of 1" diameter 16-gauge tubular steel base
17" x 16 1/2" sturdy polyurethane seat
OA241 comes with a 4-leg base and
manual height control from 22" to 28" – simply raise
or lower the steel rod and lock securely into place
• ON563/ON564 comes with a 5-leg glass
reinforced nylon base and nylon foot ring
• ON563/ON564 features pneumatic height
control from 21" to 28"
Model
No.
OA241
ON563
ON564
WELDING &
METALWORKING
Description
4-leg base with glides
5-leg base with glides
5-leg base with casters
SAFETY
EQUIPMENT &
SUPPLIES
Price
/Each
270.35
270.35
270.35
ON564
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1591
12-07-23 8:33 AM
SEATING
STATIONARY & ADJUSTABLE
HEIGHT STOOLS
• Ruggedly built for long lasting service
in a warehouse factory or office
• All-welded frame is a 7/8" dia. steel tube
• Legs are braced with a 3/4" 18-gauge circular
footrest for increased strength and stability
• 14" diameter embossed steel seat
has a 1/8" tempered hardboard inlay
• Model FC656 has a 14 1/2" x 15" sq.
seat and is reinforced by steel bars
• All stools have four chrome floor
glides that won't damage floors
• On the adjustable models the
telescopic legs have screw locks
that adjust on 1" increments
• Contoured back rest
constructed of 19-gauge steel
• Colour: Royal grey
• Model OK067 is a premium shop
stool which is chrome-painted
STATIONARY HEIGHT
A.
B.
B.
C.
ADJUSTABLE HEIGHT
Seat
Dim."
14
14
14
13 1/2
Height"
24
24
30
25 1/2
POLYURETHANE SEAT
STOOLS
• Maximum comfort, durable
economical stools with selfskinned polyurethane
padded seat
• Easy to maintain in any
environment
• 14" dia. seats mount to
stationary, adjustable
or swivel stools of
various heights for
your convenience
• Sit/stand seat options
(OG389, OG390) offer
an ergonomic molded
polyurethane seat,
mounted on a sturdy
4-leg steel base
Model
No.
OG385
OG386
OG387
OG388
OG389
OG390
Seat
Dim."
14
14
14 1/2 x 15
Height"
25-33
25-33
18-26
Wt.
lbs.
12
20
18
Price
/Each
90.40
149.75
169.85
Pneumatic seat height control adjust from 23" to 33"
Manual back height and depth adjustment
Chrome-plated adjustable footring
Five star nylon-reinforce base
for strength and durability
• Back dimensions: 16" W x 9 1/2" H
• Seat dimensions: 18 3/4" W x 16 5/8" D
OG389
OG387
Adjustable
Height"
18 - 26
25 - 33
23 - 30
28 - 35
18 - 26
25 - 33
13 1/2
13 1/2
13 1/2
13 1/2
13
13
Seat
Dimensions"
x
x
x
x
x
9
x
x
9
x
Price
/Each
129.65
129.65
200.00
200.00
147.74
147.74
1 1/2
1 1/2
1 1/2
1 1/2
2
2
Model
No.
OA276
Model
No.
OA286
JANITORIAL &
MAINTENANCE
Colour
Black
SAFETY
EQUIPMENT &
SUPPLIES
Colour
Black
Wt.
lbs.
25
Price
/Each
246.64
MID BACK
DRAFTING/TASK CHAIRS
• Contoured foam seat 20" x 18 1/2"
• Back dimensions 18" x 19" with
integral ergo support
• Standard 100% polypropylene
black fabric upholstery
• 5-leg glass reinforced nylon base
• Height adjustment 16"-22"
• Multi function
type seat mechanism
• T-arms
Model No. ON565
Price Each 349.80
Price
/Each
300.50
WELDING &
METALWORKING
R33116E
Price
/Each
164.82
Model
No.
OE096
DRAFTING STOOLS
• Designed with a
contoured seat and back
• 3-way back adjustment
provides user comfort
• Seat and back are made
with a solid 3/4" plywood
frame and fastened
together with T-nuts
• Standard 100%
polypropylene
black fabric upholstery
• One piece durable plastic
base with nylon footrest
• Two pneumatic gas
levers simplifies height
adjustment from 24 1/2"
to 30" and ergonomic tilt
• With casters
1589-1597_Eng.indd 1592
Model
No.
D. FC653
E. FC655
F. FC656
•
•
•
•
STENO CHAIRS
MATERIAL
HANDLING &
STORAGE
Price
/Each
139.70
75.32
75.32
150.70
ECONOMY DRAFTING CHAIRS
• A heavy-duty industrial
chair at an
economical price
• Comfortable 2 1/2"
foam-upholstered seat
with a full 360° rotation
• Padded backrest with
a floating spring
action back hinge
• Standard black
vinyl upholstery
• A five prong base
for increased stability
• Height adjustment
from 17" to 22"
• Included: Five swivel
black nylon, twin
wheel casters
1592
Wt.
lbs.
20
12
14
12
OG385
Description
Fixed Seat
Fixed Seat
Swivel Seat
Swivel Seat
Shaped Sit/Stand Seat
Shaped Sit/Stand Seat
Colour
Black
E.
C.
A.
Model
No.
FC649
FC647
FC648
OK067
F.
D.
B.
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
INSTRUMENTS,
SCALES &
ELECTRICAL
OFFICE
PRODUCTS
12-07-23 8:33 AM
SEATING
ERGONOMIC INDUSTRIAL SHOP SEATING
ERGONOMIC SEATING
• Industrial chairs featuring comfortable and
supportive seating that is easy to clean
• Seats made of a soft molded polyurethane
material, backs formed to support the body
for greater comfort and less fatigue
• Pneumatic height adjustment of 15" to 20 1/2"
• Adjustable back rest
• 5-prong poly on steel base with dual wheel carpet casters
• Optional chrome foot ring adds 10" to height
• Glides recommended with foot ring
• Model OC816 and OC821 task chairs have
adjustable backrest height, depth and angle
• Optional stool kit model OC822
• Designed for the industrial work
place, food industry, or any application
• Provides workers with dynamic seating
necessary for the maintenance
of health and productivity
• Ergo stool offers a black self-skinned integral
molded polyurethane foam seat and back for
durability and ease of maintenance
• Stool features proper lumbar support,
swivel and water-fall seat and three
pneumatic height adjustments
Model
No.
Description
W/CASTERS
OC815
Operator's Chair
OC816
Task Chair
NH450
Operator's Chair w/stool kit
NH451
Task Chair w/stool kit
W/GLIDES
OC820
Operator's Chair
OC821
Task Chair
NH452
Operator's Chair w/stool kit
NH453
Task Chair w/stool kit
Wt.
lbs.
OC815
Model
Adjustable
No.
Description
Height"
2" SWIVEL CARPET CASTERS
FC677
No footring
16 - 22
FC678
Footring
20 - 29
FC679
Footring
23 - 33
W/GLIDES
OD513
No footring
16 - 22
OD514
Footring
20 - 29
OD515
Footring
23 - 33
Price
/Each
25
26.5
30
31.5
327.16
355.76
430.84
458.55
25
26.5
30
31.5
327.16
355.76
430.84
458.55
OC816
Model
No.
OE088
Description
Stool
Wt.
lbs.
20
OE088
HEAVY-DUTY STEEL
STEP STOOLS
R33117E
• Comes with a double platform
with non-slip rubber tread
• Spring-loaded casters retract under slight pressure,
forcing base to the floor
• 11" diameter upper platform and
13 1/2" diameter lower platform
• 17 1/4" diameter base has an
all-around protective bumper
• 16 1/2" overall height
• Wt. 10 lbs. • Colour: Black
Model No. ON528
Price/Each $99.85
1589-1597_Eng.indd 1593
OD515
351.40
412.99
417.99
Price
/Each
294.08
FC685
• 10" pneumatic seat height adjustment (20" to 30")
with a contoured, black polyurethane seat and back
• Articulating hinged back provides support
• Seat depth adjustment enables
proper back to front seat support
• Footing, back upright and cylinder
are chromed to provide a clean environment
• Ideal for electronic labs or defence industries who require
furniture designed to direct static electricity away from
delicate equipment, components, or chemicals
• Dimensions: 18" W x 20 1/2" D x 42" H
Model No. OK046 Price/Each $541.60
INSTRUMENTS,
SCALES &
ELECTRICAL
351.40
412.99
417.99
• Sit/stand stools dramatically reduce fatigue
for workers unable to sit down on the job
• Can be positioned for up close work
• Model FC683 heavy gauge triangular glides provide safety, features a built-in
footrest, a 15" wide x 13 7/8" high self skinning polyurethane seat mounted to an
adjustable spring suspension frame that automatically tilts forward up to 15° while
in use
• Removable seat attaches to frame with a double pin locking system
which easily adjusts to 12 positions from 21" to 35"
• Model FC685 features a sturdy, tip proof 5-leg base
with a padded comfortable "Bicycle style" seat
• Pneumatic height adjustment from 23 1/2" to 33 1/2"
ELECTROSTATIC DISCHARGE (ESD)
LOW BACK TASK CHAIR STOOLS
OFFICE
PRODUCTS
Price
/Each
SIT/STAND STOOLS
SHOPTECH ERGONOMIC
INDUSTRIAL STOOLS
• Industrial seating that brings ergonomic
comfort and productivity to the shop
floor, the laboratory or the shipping office
• Durable, easy-to-clean, molded
polyurethane seating is the perfect solution for clean
rooms or wipe down applications
• Overall height of 16" to 21" with
a 19" wide by 14" deep seat
FC677
SHIPPING &
PACKAGING
FC683
Model
No.
FC683
FC685
Description
Manual Adjustment
Pneumatic Adjustment
STEP STOOLS
• Tough one piece poly
construction with anti-skid bottom
• Threaded top and expanded step
• 16" diameter base provides added stability
• Glides easily on retractable
rubber casters
• 13" overall height
• Capacity: 300 lbs.
• Weight: 7 lbs.
Model
No.
OA299
OA300
TOOLS &
EQUIPMENT
Colour
Black
Beige
Price
/Each
135.69
135.69
WELDING &
METALWORKING
SAFETY
EQUIPMENT &
SUPPLIES
Price
/Each
480.35
201.40
FOLDABLE
STEP STOOLS
• Slip-resistant surfaces
on steps and foot pads
• Stands upright when
folded and requires
minimum space
for storage
• Easy to clean
and resistant
to dents and rust
• Capacity: 300 lbs.
Model No. MH866
Price/Each $58.81
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1593
12-07-23 8:33 AM
SEATING
SPECIALTY STOOLS
• Designed specifically for laboratories
and medical offices
• Available with 14" diameter,
3" high vinyl or fabric covered seat
• Pneumatic mechanism to adjust the height
• Full foot ring is standard on stools except for models
OC785, OC791 and OC788
• Optional footring for these models: OC819
• Optional casters or glides available
OC819 optional foot ring $49.19
OC790
OC786
Model No.
Vinyl
CASTERS
OC785
OC786
OC787
Fabric
Adjustable
Height"
Wt.
lbs.
Price
/Each
OC791
OC792
OC793
16 - 22
21 - 28
23 - 33
14
18
20
118.79
170.42
177.30
Model No.
Vinyl
Fabric
GLIDES
OC788
OC789
OC790
OC796
Adjustable
Height"
Wt.
lbs.
Price
/Each
16 - 22
21 - 28
23 - 33
14
18
20
118.79
170.42
177.30
PNEUMATIC SWIVEL STOOLS
SCOOTER STOOLS
• 5" gas lift
• Height adjustable
from 18" to 23"
• Black select fabric
• Weight: 10 lbs.
Model No. OD846
Price/Each $133.19
• All-steel construction and soft rubber
casters with ball bearing movement
allow the Scooter stool to give rugged
and versatile service
• Tray shelf for tools or papers
• Capacity: 300 lbs.
• Shipped knocked down
• Ten-year warranty
• 10" gas lift
• Height adjustable
from 23" to 33"
• Options ST-03
footring (OC822)
• Weight: 12 lbs.
Model No. OD847
Price/Each $175.19
Model
No.
OE848
•
•
•
•
•
•
•
Oversized 17" polyurethane seat
5" pneumatic lift of 25" to 30" for easy height adjustment
Five legs, all-welded steel base, gives optimum stability
16-gauge 1" diameter steel legs
Full 360º rotation
Colour: Powder coated black Santex
Optional casters are available
SET OF 5 OPTIONAL TILE CASTERS
SAFETY
EQUIPMENT &
SUPPLIES
Price
/Each
249.23
249.23
249.23
WELDING &
METALWORKING
Call us for
quantity
pricing!
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
R33118E
Description
Quilt Fabric, Black
No Pattern, Ebony
Luxhide Bonded Leather, Black
1589-1597_Eng.indd 1594
Price
/Each
109.95
Model No. OJ976
Price/Each $40.15
ON570
JANITORIAL &
MAINTENANCE
Wt.
Lbs.
10
SWIVEL STOOLS
HARVEST WOOD FRAME GUEST CHAIRS
MATERIAL
HANDLING &
STORAGE
Height"
14 1/2
Model No. ON566
Price/Each $216.98
• Fully upholstered cushions
• Waterfall seat edge reduces pressure at the back
of your knees contributing to good blood flow
• Contoured cushions support the body effectively
allowing you to sit longer without discomfort
• Dimensions: 22" W x 23" D x 35 1/2" H
• Shipped fully assembled
1594
Seat
Dia."
13
SWIVEL STOOLS WITH
OVERSIZED POLYURETHANE SEAT
FOOTRESTS
• Fixed at a comfortable 8° angle
to relieve muscle strain
• Removable 14-gauge platform has
nine elevation positions which lock
into place with a double locking pin
• Black powder coat paint finish and textured
anti-slip covering on the platform
• Dimensions: 20" W x 13" D x 21" H
Model No. FC684
Price/Each $204.36
Model
No.
ON568
ON569
ON570
Tray
Dia."
15
INSTRUMENTS,
SCALES &
ELECTRICAL
OFFICE
PRODUCTS
12-07-23 8:34 AM
SEATING
STACKING CHAIRS
HORIZON CHAIRS
BIRCH PLYWOOD
• Incredibly strong and durable thermoplastic shell which assures correct
posture and provides maximum comfort for sustained periods of sitting
• Arched back with sculptured cut-out
provides excellent ventilation
• Heavy-duty welded, unitized chassis
designed to enable stacking yet
avoids protruding legs
• Legs made of 16-gauge
tubular steel
• Heavy 14-gauge channel
cross braces provide anchor
points for the shell
• Frame is black
• Seat height: 18"
• Assembled to a beige enamel steel frame
• Seat and back are 1/4" thick overall
• Most economical chair available
Model No. OA282
Price/Each $60.25
OA282
POLYPROPYLENE
• Weighs only seven pounds
and is surprisingly strong
• 7/8" tubular steel frame is in the shape
of an X under the seat giving rigidity and
strength to the unit
• Moulded polypropylene seat and back
with a texture finish
• Glides are insert type and
will not mark floors
• Will stack with all plywood
stacking chairs
• 18" seat height
Model
No.
OD925
OD929
OD933
OD937
Price
/Each
59.55
59.55
59.55
59.55
Colour
Blue
Grey
Black
Green
ARMLESS STACKING CHAIRS
OD919
Model
No.
OD919
OD920
OD920
Frame
Colour
Beige
Beige
Back & Seat
Colour
Navy
Grey
Price
/Each
51.74
51.74
• Durable polypropylene shell with a
pebbled finish on 3/4" chromed frame
• Stacks up to 8 high for compact storage
• Ultra light and stain resistant
• For use in cafeteria, warehouse
or community halls
UPHOLSTERED
OK035
• Stacks up to 10 high for compact storage
• One piece, chromed tube side frame
with vinyl-upholstered seat and back
• Standard glide is a durable black
polypropylene angled foot
• Ideal for reception seating,
cafeteria, or community halls
Black
OK032
OJ970
Model No.
Black Midnight Blue
OJ970
OK029
WITH ARMS
Price
/Each
59.67
Model No.
Black Midnight Blue
OK024
OK025
Price
/Each
58.12
Royal
OK035
MAXX STAXX TM - STACKABLE CHAIRS
OK024
ARMLESS
Model No.
Grey
OK033
Price
/Each
65.05
• Ideal for lunch rooms, training rooms,
seminars or as guest seating
• Sturdy, elliptical steel frame
• Durable nylon armrests
• Non-marking nylon floor glides
• Polypropylene seat and backrest
• Replaceable seat and backrest components
• Polypropylene seat bottom shell
(protects chair surfaces when stacking)
• Black heavy-duty GRF nylon base
• Back is 13 1/2" high and 16 1/2" wide
• Seat 17" wide x 15 1/2" deep
OK391
NESTING CHAIRS WITH CASTERS
• Waterfall seat edge reduces pressure at the back
of your knees contributing to good blood flow
• Welded steel frame
• Black polypropylene seat and back
• Hinged flip-up seat
• Nest horizontally
• 23 1/2" W x 23" D X 33.4" H
• Durable tungsten paint finish
• Two chairs per package
Model No. ON571
Price/Each $185.37
OK392
R33119E
Model
No.
OK391
OK392
OFFICE
PRODUCTS
1589-1597_Eng.indd 1595
INSTRUMENTS,
SCALES &
ELECTRICAL
SHIPPING &
PACKAGING
TOOLS &
EQUIPMENT
WELDING &
METALWORKING
Price
/Each
111.74
120.66
Description
MaxX Armless
MaxX Armchair
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1595
12-07-23 8:34 AM
SEATING & TABLES
FOLDING CHAIRS
HANGING CHAIR CADDIES
• Double-reinforced steel
at all four pivot points and cross braces
• Legs have slip-resistant,
colour-matched polyethylene end caps
• Sturdy construction withstands
wear-and-tear of frequent use
• Seat size is 16 3/4" x 16 1/4"
• Light beige
Model No. OK070
Price/Each $44.54
• Space-saving solution, ideal in
applications where space is limited
• Holds up to 84 chairs
• Portable, easy mobility with 4" swivel casters
• Overall dimensions:
64 1/2" L x 33 1/2" W x 70 1/4" H
Model No. OK072
Price/Each $561.17
LITE-LIFT FOLDING CHAIRS
• Durable molded seat and back
• Steel folding legs are finished in a scuff
resistant textured charcoal epoxy coating
• Dimensions: 18.5" W x 22.5" D x 34.24"H
• Set of 4 chairs
• Oyster Grey finish
Model No OK361
Price/Set $199.00
RACETRACK CONFERENCE ROOM TABLES
PRECISION DRAFTING TABLES
• Features superior laminate and construction, contemporary
style, and a strong and durable 3 mm PVC "Super Edge"
• Available in 8' or 10'
• Slab base
• 8' table, top is standard one piece
• 10' table, top is standard two pieces
• Cherry finish
Model
No.
OK356
ON554
W"
95
120
Dimensions
D"
x
44
x
x
48
x
H"
29
29
Durable drafting table features a heavy gauge steel base and a 4 post design
with stabilizing bars on the bottom for maximum stability.
Table includes a 12 1/2" W x 29 3/4" D tool drawer with lock
and a 38 1/8" W x 28 3/4" D reference drawer under the board.
Boards are available in 60" or 72" sizes and have a non-glare green surface.
Angle of board is easily adjustable for
a comfortable working position
on any project.
Grey enamel finish on base.
Base measures 35 1/2" H.
Price
/Each
479.68
623.08
ROUND CONFERENCE
ROOM TABLES
Shown with base
which is sold separately
Model
No.
OA914
OA909
OA912
• Constructed of thermally
fused laminate
• Features X-style base
• Dimensions: 42" Dia. x 29" H
• Cherry finish
Model No. OK355
Price/Each $247.94
Description
Small Board
Large Board
4 Post Base
W"
60
72
56 3/8
Dimensions
x D"
x
x 37 1/2 x
x 37 1/2 x
x 30 1/2
H"
1
1
Wt.
lbs.
77
95
99
Price
/Each
417.47
559.47
947.79
R33413E
1596
LITE-LIFT FOLDING CHAIRS
MATERIAL
HANDLING &
STORAGE
1589-1597_Eng.indd 1596
JANITORIAL &
MAINTENANCE
SAFETY
EQUIPMENT &
SUPPLIES
WELDING &
METALWORKING
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
INSTRUMENTS,
SCALES &
ELECTRICAL
OFFICE
PRODUCTS
12-07-23 8:34 AM
TABLES
CAFETERIA TABLES
FOLDING TABLES
•
•
•
•
• 5/8" thick tops
• Durable walnut colour plastic laminate finish
• Folding legs and perimeter metal frame
constructed of 16-gauge brown enamel steel
• Table height: 29"
1 1/8" thermally fused walnut finish laminate
Self-edged top with a black metal skirt
Chromed legs have adjustable feet glides
Ideal for cafeteria or work table
OA304
Model
No.
OK050
OK051
OK052
OK053
OK054
Top Size
x
x
x
x
x
x
L"
60
72
72
84
96
W"
30
30
36
36
48
Price
/Each
312.00
376.40
386.20
517.60
563.20
OK050
Model
No.
OA948
OA946
OA304
Top Size
L"
x
W"
72
x
36
96
x
36
60" Diameter
Price
/Each
234.40
269.53
319.77
OA948
GLOBALTM FOLDING TABLES
EDGE STACKING CADDIES
• Made of 5/8" particleboard with protective plastic corners
except OK055 which is made of 3/4" plywood core
• Walnut top with brown Vinyl T-Mould edging
• Heavy duty brown metal legs with safety locking mechanism
• Height: 29"
• For rectangular or round tables
• Ideal for tables of all widths especially
wider than 30" that must fit through
a narrow doorway
• 14-gauge steel tubing with a black finish
• Shipping weight: 65 lbs.
Model
No.
OK057
OK056
OK058
OK055
L"
60
72
96
Top Size
x
W"
x
30
x
30
x
30
60" Diameter
OG340
Price
/Each
151.99
162.72
194.90
338.30
OK057
Model
No.
OG344
OG340
Used with
Rectangular
Round
L"
49
49
Dimensions
x W"
x H"
x 31 1/4
x 32 1/4
x 31 1/4
x 41 1/4
Table
Capacity
10
8
Price
/Each
706.28
695.42
FLAT STACKING CADDIES
POLYPROPYLENE FOLDING TABLES
• Speeds up set-up and storage of all sizes and types of folding tables
• 4" diameter swivel casters mounted to a heavy gauge welded frame
• Side rails are covered with neoprene rubber to protect tables
•
•
•
•
74" L x 31 1/4" W x 36 1/4" H. Wt.: 67 lbs.
Stacks 10-12 24" / 30" / 36" W x 60" / 72" L tables
or 20-24 18" W x 72" L tables
Model No. OG342
Price/Each $522.90
Multi purpose
Lightweight, durable and portable
Easy to clean
Folding legs automatically lock by use of
gravity activated mechanism when opened
• High strength 19-gauge, 1 1/8" diameter steel tubular
legs have welded crossbars for durability and stability
OG342
97 1/2" L x 31 1/4" W x 36 1/4" H. Wt.: 78 lbs.
Stacks 10-12 24" / 30" / 36" W x 96" L tables
or 20-24 18" W x 96" L tables
Model No. OG341
Price/Each $544.57
Model
No.
OK131
OK129
OK130
OK137
OK138
Description
Rectangular
Rectangular
Rectangular
Round
Round
L"
48
72
96
48
60
Dimensions
W"
x
30
x
30
x
30
x
48
x
60
x
x
x
x
x
Wt
lbs.
23
36
50
31
47
H"
29
29
29
29
60
Price
/Each
95.78
134.41
208.55
154.48
247.94
Chairs
not included
OG340
R26028E
OK129
OK137
OFFICE
PRODUCTS
1589-1597_Eng.indd 1597
INSTRUMENTS,
SCALES &
ELECTRICAL
SHIPPING &
PACKAGING
TOOLS &
EQUIPMENT
WELDING &
METALWORKING
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1597
12-07-23 8:34 AM
COMPUTER SUPPLIES
ALL-WELDED DESKTOP CABINETS
Equipment Not Included
• Locking slide-in pocket doors with inner
compartments for storage of files or manuals
• Pull out keyboard shelf
• Sliding tray may be used for mouse pad or as a writing surface
• Vented back for air circulation
• Finish baked enamel blue and grey
• Ships fully assembled
Model No. OC533
OC533
Desktop
cabinet with
enclosed stand/
printer stand
OPEN PEDESTAL STANDS
• 32" high, designed to support the desk top unit for stand up operation
• Blue baked enamel finish
• Includes: Convenient storage shelf and adjustable
leg levellers for uneven work surfaces
• Shipped knocked down
Model No. OC534
Desktop
cabinet
with open
pedestal stand
ENCLOSED PEDESTAL
STANDS/PRINTER STANDS
• Roll in/roll out hideaway printer stand which
locks inside the enclosure when not in use
• Printer stand has two adjustable, one bottom 28" W x 25" D
shelves for printers or peripherals and paper
• 30" high enclosure may be oriented for left or right hand access
• Blue and grey baked enamel finish
• Shipped knocked down
Model No. OC535
Model
No.
Description
OC533
Desktop Upper Computer Cabinet Only
OC534
Computer Cabinet Open Pedestal Base Only
OC535
Computer Cabinet Enclosed Base w/Printer Stand
OC535
OC534
W"
30
30
30
x
x
x
x
Dimensions
D"
27 3/4
27 3/4
27 3/4
x
x
x
x
Wt.
lbs.
122
66
142
H"
30
32
33
Price
/Each
710.90
387.25
881.40
MOBILE COMPUTER CABINETS
MOBILE SECURITY COMPUTER CABINETS
• All-steel welded construction
• Top monitor compartment is 22 1/2" W x 23" D
x 18 3/4" H with a slide-out keyboard shelf
• Locks independently of bottom section
which includes 2 adjustable shelves
• 5" polyolefin casters
(2 rigid, 2 swivel w/brake)
• Total dimensions: 26" W x 24" D x 64" H
• Wt.: 149 lbs.
• Finish durable baked
enamel blue and light grey
• Includes: Vented back for air
circulation and a 6-outlet power
strip with built-in surge suppression
• Shipped fully assembled
• Equipment not included
Model No. OC532
Price/Each $1241.20
• Secure locking cabinet with resistant
acrylic see-thru window for LCD monitor
• Slide out locking keyboard is
19 3/4" W x 17 1/2" D x 4" H
• Lower compartment is
20 1/2" W x 21" D x 23 1/2" H and has
a locking front and rear access doors
• Two convenient side wing shelves for additional
work space, fold down when not required
• 5" heavy-duty casters (2 rigid, 2 swivel w/brake)
• Overall dimensions:
24 1/2" W x 22 1/2" D x 62 1/4" H
• Powder coated finish provides a durable finish
• Equipment not included
MOBILE COMPUTER CABINETS
COMPUTER CABINETS
•
•
•
•
• A unique two-piece heavy-duty all-welded steel
construction that provides space efficient security
for your valuable electronic equipment
• Locking upper compartment with plexiglass window
provides viewable access for most 20" monitors
• Lower compartment features one
fixed bottom and one adjustable shelf
• Top level can be bolted onto a desk (bolts not included)
• Louvers in the rear provide equipment ventilation
• Heavy-duty all-welded steel
top and bottom sections bolt
together for easy assembly
• Includes: 5" casters
(2 rigid, 2 swivel w/brake)
• Equipment not included
Model No.
OG880
OG881
OG882
OG883
1598
MATERIAL
HANDLING &
STORAGE
1598-1602_Eng.indd 1598
JANITORIAL &
MAINTENANCE
Model
No.
OE824
OE825
OE826
OE827
SAFETY
EQUIPMENT &
SUPPLIES
WELDING &
METALWORKING
Description
Complete Computer Enclosure w/Casters
Complete Computer Enclosure w/Casters
Top Level (internal)
Top Level (internal)
TOOLS &
EQUIPMENT
Price/Each
695.00
695.00
695.00
695.00
W"
24 1/2
24 1/2
20 3/4
20 3/4
SHIPPING &
PACKAGING
Dimensions
x D" x
x 22 1/2 x
x 22 1/2 x
x 21 3/4 x
x 21 3/4 x
OE825
H"
59 1/2
59 1/2
19 1/4
19 1/4
INSTRUMENTS,
SCALES &
ELECTRICAL
Colour
Light Grey
Putty
Light Grey
Putty
Price
/Each
675.16
675.16
312.40
312.40
R27019E
All-steel construction
Slide-out keyboard tray
Lower lockable cabinet is 24 5/8" W x 22 7/8" D x 22 5/8" H
Two-position shelf can be located for desk
top style or up to 18" H tower style CPU's
• Fixed shelf is 24 5/8" W x 22 7/8" D x 11 1/2" H
and provides ample room for any sheet
fed style or continuous form style printer
• Rear cabinet access holes for paper feed,
cables and ventilation fan (not included)
• 5" polyolefin casters
(2 rigid, 2 swivel w/brake)
• Total dimensions: 27" W x 24" D x 49 1/4" H
• Weight: 125 lbs.
• Colour: Blue
• Shipped knocked down, assembly
required with simple hand tools
• Equipment not included
Model No. OC839
Price/Each $618.74
Colour
Blue
Putty
Light Grey
Black
OFFICE
PRODUCTS
12-07-24 12:21 PM
COMPUTER SUPPLIES
COMPUTER CABINETS FOR
HARSH ENVIRONMENTS
EXTRA WIDE COMPUTER CABINETS
• Heavy-duty all-welded construction
with vented back for air circulation
• Separate locking upper and lower compartments
allow access only to the equipment needed
• Slide out keyboard shelf facilitates ergonomic operation
• Two adjustable shelves in lower section
can be located for any style equipment
• Top compartment: 46 1/2' W x 23"D x 18 1/2"H
• Lower cabinet section: 46 1/2' W x 23"D x 30"H
• Overall size: 50"W x 24"D x 64"
• Tough powder coat finish
• Complete with five polypropylene casters
• Includes 6-outlet UL listed and CSA approved
power strip with built-in surge protection
Model No. ON576
Mfg. No. CSC6718
Price Each: $1599.00
• Heavy-duty all-welded construction with forklift channels for easy movement
• Built-in fan with guard and filter keeps equipment cool and
provides positive air pressure in the enclosure to keep out dust
• Locking upper compartments with plexi-glass
window provides viewable access to most 20" monitors
• Locking Pull-out drawer facilitates ergonomic operation of
keyboard and mouse while top and bottom compartments are locked
• Roll-out printer shelf in lower section provide full access and is height adjustable for any
style equipment
• Adjustable bottom shelf provides
space for desktop or tower style CPUs
• Rear access panel for easy
cable management
• Caster base includes 5" polypropylene
casters (two-rigid two-swivel with brake)
• Tough powder coat finish
• Includes 6-outlet UL listed and CSA approved
power strip with built in surge protection
• Optional caster base available
for even greater mobility
PLASTIC AV
HEIGHT-ADJUSTABLE CARTS
ON574
Model
No.
ON574
ON575
Mfg.
No.
CSC6850
CSC6852
Description
Computer Cabinet
Optional Caster Base
Dimensions
Weight
Price
W"
D"
H"
lbs.
Colour
/Each
28 1/2 28 1/2
60
255
Blue 1695.00
38
Blue
151.34
FLAT PANEL MULTIMEDIA CARTS
•
•
•
•
•
Move your flat-panel monitor and other equipment safely and securely
Holds up to 42" monitors
Steel construction cart, mobile on 4 casters (2 locking)
Dimensions: 39 1/2" W x 27" D x 68" H
Includes: UL approved electrical assembly
with surge protector and a detachable file pocket
• Easy assembly instructions included
• Equipment not included
• Push and position media equipment with ease
• Heavy-gauge plastic resists dents and scratches
• Holds up to a 20" monitor and has three outlet
UL approved mini-surge protector with power switch
• Mobile on 4 swivel casters (2 locking)
• Capacity: top shelf 50 lbs., middle shelf 15 lbs.,
bottom shelf 15 lbs.
• Dimensions: 27 3/4" W x 18 1/2" D x 42" H
• Equipment not included
Model No. OK004
Price/Each $263.19
OK002
OK003
DURACART TM
• Lightweight plastic multimedia cart is
excellent for use with monitors and
multimedia projector system
• Includes: UL listed 3-outlet electric assembly,
casters (2 locking), 15' cord and a cord
wrap management system
• Guaranteed against stains,
scratches, dents and rust
• Equipment not included
Model No. OK085
Price/Each $285.04
Model
No.
OK002
OK003
Description
Open
With a Locking, Steel, Ventilated Cabinet to Store Materials Securely
Price
/Each
671.67
806.20
ECONOMY
WORKSTATIONS
• Excellent for monitors and projectors
• All-steel construction, die-pressed
shelves and arc welding for maximum
strength and durability
• Top shelf can adjust to heights
of 26", 30", 38" and 42"
• Includes: UL listed 3-outlet electric
assembly with 25' cord
• 4" casters with 2 locking
• Equipment not included
Model No. OK086
Price/Each $307.31
R33809E
• Moulded shelf and legs
will not scratch, dent or rust
• Complete with surge electric and
4" casters (two with brakes)
• Assembly required
• Dimensions: 32" W x 24" D x 27" H
• Equipment not included
Model No.
Grey
OD273
OFFICE
PRODUCTS
1598-1602_Eng.indd 1599
Wt.
lbs.
34
Description
Economy Workstation
INSTRUMENTS,
SCALES &
ELECTRICAL
STEEL TABLE & CABINET CARTS
SHIPPING &
PACKAGING
Price
/Each
397.50
TOOLS &
EQUIPMENT
Model No. OK087
Includes: Lower locking
compartment for secure storage
Price/Each $512.16
WELDING &
METALWORKING
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1599
12-07-24 12:22 PM
COMPUTER SUPPLIES
HEAVY-DUTY
KEYBOARD DRAWERS
AVOID DEBILITATING
ERGONOMIC INJURIES
HEAVYDUTY SLIDE OUT TRAYS
KEYBOARD / MOUSE PLATFORMS
• The goal is to have the hands and wrists remain in a neutral position
during typing and prevent over-reaching when using the mouse.
An under-the-desk articulating keyboard / mouse platform is an
essential component of the concept of total adjustability.
• The platform should rotate 360 degrees. It should be adjustable up
to 6 inches in height, tilt from –10 degrees to + 15 degrees, and extend
2 inches out from the desk or return. The platform should have a non-skid
surface. The platform should have an adjustable wrist rest.
• Having the mouse in close proximity to the keyboard is very important. Repeated
or prolonged over-reaching or hyperextending for a mouse can place a stress on
the shoulder and ultimately result in tendonitis, inflammation, etc. This frequently
happens when a conventional keyboard tray is used without a mouse tray. The
keyboard tray requires that one sit farther back from the work surface; this requires
one to lift their arm up and out to use the mouse. Ideally, the mouse platform
should be an integral part of the keyboard platform.
KEYBOARD AND MOUSE PLACEMENT
• Place the keyboard and mouse directly in front of and close to you.
• Adjust the keyboard as low as possible, but with adequate leg room.
• Adjust the slope of the keyboard so that your wrists are straight. They
should not extend downward or upward while typing.
• Type with your hands and wrists floating above the keyboard, using the wrist pads
only to rest your wrists while typing. Studies have shown that office workers tend
to relax their arms against the wrist rest while using the computer. It is important
to avoid doing so, as using the wrist rests to support the arms often isolates
movements from your wrist down to your fingers, which can cause problems.
• Avoid resting your wrist on sharp objects (e.g., desk edge).
KL-28S ECONOMY
KEYBOARD DRAWERS
•
•
•
•
•
Laminate with 3-mil PVC edging (28" x 11.75")
Fixed height, 16" ball bearing slides
Keyboard and mouse on same level
Mouse-friendly surface
Suitable for right or
left handed users
• Low profile platform
maximizes knee clearance
• Meets or exceeds BIFMA standards
• Optional 27" gel filled wrist
support and anti-skid bottom
Description
Economy Keyboard Drawer
Gel-Filled Wrist Support
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Lever-activated height adjustment
Height adjustment range of 6" below worksurface
Trigger activated +/- 15˚ angle adjustment
23" durable ABS plastic tray in a black finish
Extendable mouse surface extends 7.5" outside tray
19" GelfoamTM removable, snap-in wrist rest
Comfort grip handle to extend or store keyboard
Forward indexing mouse surface with three positions
Built-in cable management and fence
Indexing mouse friendly surface
17" low profile ball bearing track
360˚ swivel mount
Adaptable for right or left handed users
Low profile mechanism and platform
maximizes knee clearance
• Meets or exceeds
BIFMA and ADA standards
KEYBOARD DRAWERS
• 26" tray with integrated mouse area
• Fits all keyboard sizes
• 3 position height adjustable
• Includes a full-length gel wrist pad
• Dimensions: 26" x 13 5/8" x 2 3/4"
Model No. OTG387
Price/Each $92.77
HEAVY-DUTY
ARTICULATING
KEYBOARD TRAYS
• Fully articulating swing arm is
height/depth adjustable
• Swivel mount with tilt tray feature
• Includes anti-skid surface
• Keyboard stores under work surface
• Tray size:
11" x 23" w/o mouse platform
11 1/2" x 21 1/2" w/mouse platform
Description
Heavy-Duty Articulating Keyboard Tray
Heavy-Duty Articulating Keyboard Tray w/Mouse Platform
Price/Each
220.51
261.01
• Lift n' lock "leverless" height adjustment
• Height adjustment range of 2.5" above and 6" below work-surface
• Innovative dial tilt makes angle adjustment quick
and easy - angle adjustment +10˚ to -15˚
• Tilt and height indicator displays present keyboard position
• 26" steel platform
• Mouse and keyboard on the same level
• 26" GelfoamTM palm/wrist support
• Mouse/cord management rails (right or left)
• Anti-skid / anti-static pads keep keyboard in place
• Mouse friendly surface
• 21" smooth glide storage track
• 360˚ swivel mount
• Suitable for right or left handed users
• Low profile mechanism and platform
maximizes knee clearance
• Meets or exceeds BIFMA and ADA standards
Model No. ON567
Price/Each $300.00
DUSTER - S02007
SAFETY
EQUIPMENT &
SUPPLIES
WELDING &
METALWORKING
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
INSTRUMENTS,
SCALES &
ELECTRICAL
R33811E
1598-1602_Eng.indd 1600
JANITORIAL &
MAINTENANCE
Price/Each
99.90
169.20
• Pressurized non-flammable gas that removes microscopic
particles of lint, dust, ferrous oxide and other contaminants
• Non-abrasive
• Ideal for electronic equipment, laboratory equipment,
precision mechanical parts, optical equipment and more
• Size: 8 oz.
Model No. AB934
Price/Each $11.56
Model No. OK382
Price/Each $229.14
MATERIAL
HANDLING &
STORAGE
Description
Keyboard Tray (Heavy-Duty)
Keyboard Tray (Heavy-Duty) w/Mouse Platform
JIVE ARTICULATING KEYBOARD SYSTEMS
Price/Each
68.34
49.76
TANGO ARTICULATING
KEYBOARD SYSTEMS
1600
Model No.
OB536
OB537
Model No.
OB538
OB539
OK383
Model No.
OK383
ON572
• Adjustable mounting brackets
• Smooth action ball bearing slides
• Available with or without
extendible mouse platform
• Tray size: 11" x 23" w/o mouse platform
OFFICE
PRODUCTS
12-07-24 12:22 PM
COMPUTER SUPPLIES
PERSONNEL GROUNDING PRODUCTS
ARSTAT 5000 SERIES
WRIST STRAPS
TABLE MAT KITS
• Vinyl static dissipative table mats drain
static charges to protect static sensitive
materials such as electronics,
computers and instruments
• A three-layer construction provides
excellent electrical properties
• Top layer is a tough dissipative vinyl,
the centre layer has a highly conductive
metal scrim and the bottom layer
is dissipative foam, which provides
a great cushion and will not slip
• Kit includes 15' common point ground,
which attaches to a wrist strap
• Surface resistivity: 107 – 108 ohms/sq.
• Premium performance wrist
straps uses a silver-plated
monofilament, continuous
thread throughout the nylon
band, which establishes
a 360˚ conductive path to
maintain reliable continuity
• Stainless steel back plate
ensures skin contact
• Available with a 6' or 10' cord,
complete with 1 megohm resistor
Model
No.
OE841
OE842
FLOOR MAT KITS
• Conductive rubber floor mats
are designed to drain static
charges to the ground,
using a path created from
a conductive surface
• Resists solder, fluxes and
most acids used in an
electronic production area
• Kit includes 10' mat ground
cord and heel grounder
• Surface resistivity:
10 6 – 108 ohms/sq.
Model
No.
OE834
OD992
HEEL & TOE GROUNDERS
Description
Table Mat Kits
Floor Mat Kits
Price
/Each
135.68
167.26
Dimensions"
24 x 48
24 x 48
ELASTIC ADJUSTABLE WRIST STRAPS
HEEL GROUNDER
NO. 793HG
Price
/Each
13.94
37.11
STATIC DISSIPATIVE ANTI-FATIGUE NO. 791
QUICKLY DRAINS STATIC ELECTRICITY FROM WORKERS
R33812E
• Frequently used in commercial areas where static
discharge can harm products or equipment
• Excellent resistivity: RTG 1 x 107 ohms
• Super resilient Nitricell® sponge base provides
long-term comfort and relieves employee fatigue
• Easy-to-clean vinyl surface and safety bevelled edges
• Each mat has a one mega ohm snap and must be grounded
• Workers must be wearing conductive shoes or heel
grounders (SAL252) to allow the mats to function
• 1/2" thick
• Colour: Grey
Price
/Each
110.78
276.10
3-YEAR
WARRANTY
1598-1602_Eng.indd 1601
INSTRUMENTS,
SCALES &
ELECTRICAL
62.27
82.15
15.70
SHIPPING &
PACKAGING
Model
No.
SAL252
TOOLS &
EQUIPMENT
Price
/Each
16.70
STAT-FREE WORK SURFACE MATS
• Very functional, effective solution in areas
where static control is imperative
• Designed for workbenches and desks,
underneath computers and at workstations
where sensitive components are
packaged or repaired
• Flexible, three-layer construction has a conductive
scrim sandwiched between two layers of vinyl
• Provides excellent electrical properties
• For maximum effectiveness, ground the mat using
SAR851 and ground the worker with SAR852
• Colour: Blue
Model
No.
SAR847
SAR848
SAR849
SAR850
ACCESSORIES
SAR851
SAR852
Grounding snap is attached to lower left hand corner of each mat
OFFICE
PRODUCTS
Price
/Each
20.05
13.01
Description
Toe Grounder with Resistor
Heel Grounder with Resistor
• The heel grounder allows static electricity to pass
from the worker to the ESD matting or flooring
• One size fits all and the velcro loop
allows for easy attachment
• Allow the fabric strip to touch the
workers skin for best performance
• One megohm resistor
• 0.060" thick
Description
Band Only
Band w/6' Coil Cord
Model
Dim.
No.
W' x
L'
NH534
2
x
3
NH535
3
x
5
CUTS UP TO 75' IN LENGTH
NB694
3
x lin.ft.
NB695
4
x lin.ft.
SAJ574 15' L Ground Wire (Sold Separately)
Model
No.
OE839
OE840
OE839
OE840
• Disposable heel grounder is
made from black polyethylene
with adhesive attachments
• Designed to discharge
static from a person
to a grounded
walking surface
• Reusable heel and
toe grounders feature
built-in resistor for safety
• Extra wide, soft elastic band for increased wearer comfort
• Has silver impregnated nylon knitted on inside for superior
conductivity that reliably removes generated static charges
• Adjustable, may be fitted to almost all people
• Locking clasp locks band so it will not slip
• Non-shedding, non-sloughing band
material that is cleanroom compatible;
safe for micro-electronics
• UL Listed
• Circumference - 2.5" - 13"
NOTE: All bands have a 4 mm snap stud.
Complete wrist strap kits include an alligator clip
Model
No.
OD974
OD975
Price
/Each
13.01
15.02
Description
With 6' Coil Cord
With 10' Coil Cord
WELDING &
METALWORKING
W'
2'
2'
2'
3'
Dim.
x
x
x
x
x
Price
/Each
69.45
92.62
24.31
35.48
L'
3'
4'
lin.ft.
lin.ft.
19.39
12.81
Common Point Ground Cord 15'
Wrist Strap w/6' Coil Cord
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1601
12-07-31 10:38 AM
COMPUTER SUPPLIES
ESD TRAYS
• Trays provide conductive and shielding
protection for use in electronics manufacturing
• Resistant to abrasion and chemicals
• Easy to clean with steam or water (temperature range: -60˚F to 250˚F)
• Trays are permanently dissipative and are unaffected by washing
Model
No.
CF261
CF262
Dimensions
L" x W" x H"
18 x 12 x 1
18 x 14 x 1
Weight
lbs.
1.6
1.8
Model
No.
CF263
CF264
Price
/Each
36.34
36.78
Dimensions
L" x W" x H"
20.36 x 15.13 x 1
25.75 x 17.88 x 1.1
Weight
lbs.
2
2
Price
/Each
41.19
41.91
ESD DIVIDER BOXES
Dividable, conveyable boxes are available in conductive material (black). All containers can be
divided into compartments by length and/or width. Dividers are on 1.25" centres.
CONDUCTIVE BINS
Black, carbon-filled, injection moulded polypropylene copolymer
resin. These containers provide conductive and shielding protection
for use in electronics manufacturing. Provides a Faraday cage for
parts when container is covered. Unaffected by humidity. Permanently
conductive. Static decay rate of <0.10 seconds at +5 kv applied charge.
105 ohms per square resistivity.
OUTSIDE DIMENSIONS
Model
Dim. Top
Dim. Botttom
No.
L" x W" x H"
L" x W"
CONDUCTIVE BINS
CB935
10.8 x 8.5 x 2.5
9.8 x 7.3
CB936
10.8 x 8.5 x 3.5
9.8 x 7.3
CB909
10.8 x 8.5 x 5
9.8 x 7.3
CB910
16.5 x 10.9 x 2.5
15.5 x 9.9
CB937
16.5 x 10.9 x 7.0
15.5 x 9.9
CB912
22.4 x 17.4 x 5
20.9 x 15.9
CB913
16.5 x 10.9 x 3.5
15.5 x 9.9
CB914
16.5 x 10.9 x 5
15.5 x 9.9
CB915
16.5 x 10.9 x 6
15.5 x 9.9
CB916
16.5 x 10.9 x 8
15.5 x 9.9
CB917
22.4 x 17.4 x 6
20.9 x 15.9
CB918
22.4 x 17.4 x 8
20.9 x 15.9
CB919
22.4 x 17.4 x 12
20.9 x 15.9
SHORT DIVIDERS
Vol.
Cu. ft.
Wt.
lbs.
Price
/Each
Model
No.
0.07
0.11
0.16
0.16
0.51
0.79
0.24
0.36
0.43
0.59
0.97
1.32
2
0.5
0.6
0.8
0.9
2
2.4
1.1
1.4
1.5
2
2.5
3.3
6
15.66
17.03
20.89
24.60
36.99
53.20
24.33
28.15
29.87
39.05
59.25
69.64
83.03
CB938
CB940
CB907
CB939
CB941
CB944
CB942
CB908
CB925
CB927
CB929
CB931
CB932
LONG DIVIDERS
Slots
Price
/Each
Model
No.
7
7
7
11
11
15
5
11
11
11
15
15
15
2.00
2.17
2.48
2.13
5.06
5.57
2.58
3.10
4.75
5.40
6.09
6.88
14.11
CB939
CB942
CB908
CB945
CB943
CB946
CB947
CB924
CB926
CB928
CB930
CB934
CB933
COVERS
Slots
Price
/Each
Model
No.
Price
/Each
5
5
5
7
7
11
7
7
7
7
11
11
11
2.13
2.58
3.10
2.65
6.57
6.09
4.06
5.37
5.61
7.33
6.95
8.67
14.83
CB911
CB911
CB911
CB923
CB923
CB921
CB923
CB923
CB923
CB923
CB921
CB921
CB921
7.40
7.40
7.40
14.76
14.76
25.26
14.76
14.76
14.76
14.76
25.26
25.26
25.26
OPTICO® PROFESSIONAL CLEANING WIPES
• Individually wrapped, pre-moistened, quick drying anti-static formula easily removes
fingerprints, dust, dirt, germs and other grime
• Ideal for cleaning of critical optical and electronic surfaces such as prescription,
performance and protective eyewear, specialty lenses, LCD, plasma and interactive touchscreens, smart phones, and other hand held devices
• Made with Dupont Sontara aerospace grade non-woven fabric
• Professional grade, Canadian made, quality guaranteed
AVAILABLE IN:
ON587 Small 5 1/4" x 3 1/2"
ON588 Medium 6" x 7 1/4"
ON589 Large 12" x 13". Ideal for multiple
or large optical and electronic surfaces:
LCD, plasma and interactive touch-screens,
smart phones, interactive whiteboards, etc.
(one wipe will clean an entire call center of screens)
Model
No
ON587
ON588
ON589
ON589
ON588
ON587
Wipes
/Box
40
50
10
Description
Desktop Dispenser
Desktop Dispenser
Reclosable Bag
Price
/Each
10.80
11.30
33.00
R33813E
1602
MATERIAL
HANDLING &
STORAGE
1598-1602_Eng.indd 1602
JANITORIAL &
MAINTENANCE
SAFETY
EQUIPMENT &
SUPPLIES
WELDING &
METALWORKING
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
INSTRUMENTS,
SCALES &
ELECTRICAL
OFFICE
PRODUCTS
12-07-24 12:23 PM
SAFES
DATA PROTECTION MEDIA SAFES
HIGH SECURITY COMPOSITE SAFES
• Protects valuable records from
vandalism, fire, dust and magnetism
• Paper records will withstands
temperatures up to 177˚C (350˚F)
• Computer media records will withstand
temperatures up to 52˚C (125˚F) and
humidity up to 80%
• Rating: UL Class 350 -1 hour for safe, and
data/media insert was furnace tested by
manufacturer to 125 F (52 C) for 1 hour
• Pull out media drawers and stationary shelves
accessories are also available
• Model OE770 must be inserted into a U.L.
Class 350, 1-hour filing cabinet
• Colour: Beige
F.O.B. Saint-Jérôme, Quebec.
• UL TL-30 certified
• Built to exceed all
industry standards
• Full composite construction
features 1 1/2" diameter steel bolts
• Heavy plate steel frame, 3-way bolt work
• High quality adjustable hinges
• Class 350˚F, 1-hour fire label
• Colour: Charcoal
F.O.B. Saint-Jérôme, Quebec.
Model
No.
OE769
OE768
OE770
Outside Dimensions
H" x
W"
x
D"
29 x 21 1/2 x
21 1/2
39 x 26 1/2 x
26 1/2
9 5/8 x
15
x
21 1/4
Wt.
lbs.
315
567
40
GRAND PRIX LINE
Model
No.
OE771
OE772
OE773
Price
/Each
1958.75
2653.20
880.38
H"
27
32
39
Outside Dimensions
x
W"
x
D"
x 21 1/2 x
24
x 24 1/2 x
24
x 26 1/2 x 25 1/2
Wt.
lbs.
1050
1450
1730
LEDGER SAFE
UL LISTED SAFES
Full size ledger safe ensures
document security despite
ambient temperatures reaching
1000°C (1850°F) for a full two hours.
F.O.B. Saint-Jérôme, Quebec.
Keep documents intact for one full
hour despite exterior temperatures
as high as 927°C (1700°F).
F.O.B. Saint-Jérôme, Quebec.
Features include:
• Heavy gauge satin coat steel
with anti-rust treatment
• Insulated with moisture pockets
between the walls
• Heavy-duty hinges
• 6" continuous fixed locking bar
• Key changing combination lock
• Adjustable shelves
• Heavy-duty caster base
Features include:
• Three heavy-duty hinges
• Three adjustable shelves
• Key changing
combination lock
• Caster base
Model No.
Outside Dimensions
Black
Beige
H" x
W"
x
D"
UL LISTED 177°C 350°F FOR 1 HOUR
OC750
OA690
24 x
18 1/2
x 18 1/2
OC751
OA691
29 x
21 1/2
x 21 1/2
OC752
OA692
39 x
26 1/2
x 26 1/2
OC753
OA686
50 x
26 1/2
x 26 1/2
LEDGER CABINET MANUFACTURER CERTIFIED 177°C 350°F FOR 2 HOURS CLASS B
OC749
OC736
60 x
26 1/2
x 26 1/2
H"
17 1/2
22 3/8
32 1/4
42 1/4
50
Inside Dimensions
x W"
x
D"
Cap.
Cu. in.
Shelves
Wt.
lbs.
Price
/Each
x 15 1/2
x 18 1/2
x 23 1/2
x 23 1/2
x
x
x
x
13 1/2
16 3/8
21 3/8
21 3/8
3662
6778
16 200
21 222
1
1
2
3
175
250
455
575
895.46
1051.23
1347.71
1653.23
x
x
20
20 000
3
910
2307.48
20
FIRE RESISTANT FILING CABINETS
Horizontal
R25888E
Filing cabinets are ULC listed. Cabinets maintain
interior temperatures below 177°C (350°F) in ambient
temperatures reaching 927°C (1700°F) for one hour.
The char point of paper is only 230°C (420°F).
Valuable documents, mailing lists and records are kept safe
from fire and theft. Each drawer is independently insulated to
protect documents even when another drawer is left open.
Key operated plunger lock secures all drawers.
F.O.B. Saint-Jérôme, Quebec.
Model No.
Outside Dimensions
Black
Beige
H" x
W"
x D"
VERTICAL FILING CABINETS
OC737
OC740
54 x 19 3/4 x 31
OC738
OC741
41 x 19 3/4 x 31
OC739
OC742
28 x 19 3/4 x 31
HORIZONTAL FILING CABINETS
OC743
OC746
55 x 38 3/4 x 23 1/2
OC744
OC747
42 x 38 3/4 x 23 1/2
OC745
OC748
29 x 38 3/4 x 23 1/2
OFFICE
PRODUCTS
1603_Eng.indd 1603
INSTRUMENTS,
SCALES &
ELECTRICAL
Price
/Each
3112.49
3435.09
3814.98
Vertical
H"
Inside Dimensions
x W" x D"
10 1/2
10 1/2
10 1/2
x
x
x
10 1/2
10 1/2
10 1/2
x 32 1/2 x 15 1/2
x 32 1/2 x 15 1/2
x 32 1/2 x 15 1/2
SHIPPING &
PACKAGING
15
15
15
x
x
x
26
26
26
TOOLS &
EQUIPMENT
Drawers
Wt.
lbs.
Price
/Each
4
3
2
640
490
360
2419.04
2193.92
1794.93
4
3
2
1020
720
505
3180.83
2770.79
2353.71
WELDING &
METALWORKING
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1603
12-07-19 8:36 AM
FILING & STORAGE SYSTEMS
WELDED STORAGE CABINETS
• All-welded steel storage cabinet
is still the best choice for your office,
plant, school and institutional
storage needs
• Standard features include:
fully adjustable shelves; recessed
handle; cylinder lock; and coat rods
(wardrobe and combination types)
• Choose from Hi-Boy, Lo-Boy, Wardrobe,
and Combination cabinets in grey,
beige or black enamel finish.
• Additional shelves are available.
FB036
Combination Type
FB038
Lo-Boy Type
Grey
FB039
FB040
FB041
FB038
FB037
Model No.
Beige
FB034
FB035
FB036
FB033
FB032
Black
FB029
FB030
FB031
FB028
FB027
Description
Hi-Boy
Wardrobe
Combination
Lo-Boy
Add'l Shelf
W"
36
36
36
36
36
x
x
x
x
x
x
Dimensions
D"
18
18
18
18
18
FB030
Wardrobe Type
FB039
Hi-Boy Type
x
x
x
x
x
x
CABINET MOVERS, SET OF 2
Wt.
lbs.
140
121
144
90
6.5
H"
72
72
72
40
1
Price
/Each
445.22
448.23
534.66
346.73
33.11
Cabinet not included
• Pair of tough steel dollies makes it easy to move cabinets,
files, furniture or other bulky and heavy objects
• Thick steel frame is supported by 2 1/2" swivel casters
that allow manoeuvrability in tight areas
• Platforms’ centre is recessed to secure furniture legs
• 1000-lbs. maximum load capacity per set
Model No. OK010
Price/Each Set $215.67
ALL-IN-ONE FILING SYSTEMS
THE MOST VERSATILE FILING AND STORAGE SYSTEM ON THE MARKET TODAY!
ALL THE STORAGE YOU WILL EVER NEED IN ONE COMPACT UNIT!
•
•
•
•
2 models
Full size filing cabinets
2 or 3 shelf storage cabinet
Box storage drawer
IDEAL FOR OFFICE OR INDUSTRIAL USE
SHIPPED FULLY
ASSEMBLED, READY
FOR USE
• Drawer slides are roll formed for strength and straightness
• Fully welded lockable cabinet pedestal includes adjustable shelf
• Putty baked-on enamel finish
OA040
CHOOSE FROM 4 MODELS
Models OC379 & OA040
Gives you two full size file drawers, a convenient box storage drawer
and a 35 5/8" high storage cabinet with one adjustable shelf.
Models OC380 & OA499
Comes with three full size drawers and 42" high storage
cabinet with two adjustable shelves.
Model No.
Black
Beige
OC379
OA040
OC380
OA499
1604
MATERIAL
HANDLING &
STORAGE
1604-1611_Eng.indd 1604
JANITORIAL &
MAINTENANCE
Drawer
Style
1 Box Drawer
Price
/Each
453.26
2 File Drawers
3 File Drawers
527.00
OA499
SAFETY
EQUIPMENT &
SUPPLIES
R33869E
Box Drawer:
File Drawer:
Description
Overall Size:
35 5/8" H x 18" D x 36" W
Cabinet size:
35 5/8" H x 18" D x 17 1/8" W
Overall Size:
42" H x 18" D x 36" W
Cabinet Size:
42" H x 18" D x 17 1/8" W
4" H x 18" D x 12 5/8" W
11 1/2" H x 18" D x 12 5/8" W
WELDING &
METALWORKING
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
INSTRUMENTS,
SCALES &
ELECTRICAL
OFFICE
PRODUCTS
12-07-18 3:46 PM
FILING & STORAGE SYSTEMS
VERTICAL FILES W/RECESSED
DRAWER HANDLES
LATERAL FILES
•
•
•
•
• High side walls accommodate hanging files and eliminate
the need for hanging file frames
• Removable cam lock included
• Full cradle suspension
• Easy-to-grab recessed
pulls on drawers
• Fully adjustable and
removable follower
block is standard
in every drawer
• Legal size:
18" W x 26 9/18" D
Black
OTE611
OTE618
OTE624
Model No.
Grey
OTE612
OTE619
OTE625
Putty
OTE613
OTE620
OTE626
No of
Drawers
2
3
4
•
•
•
•
Height"
29
40
52
Wt.
lbs
70
104
128
Price
/Each
265.89
400.52
445.96
Professional quality, all-welded construction
Patented heavy gauge all-metal anti-tip system
Reinforcing cross member on all 4 and 5 drawer files
Locking mechanism with "no
plastic parts" locks all drawers
Drawers rest on heavy gauge,
triple extension progressive
arms containing 80 steel ball
bearings per pair
Dimensions: 36" W x 18" D
(also available in 30")
Cabinets with receding
doors available
Other colours also available
Black
OE738
OE740
OE723
OE742
Model No.
Beige
OE739
OE741
OE724
OE743
Grey
OF205
OF208
OF206
OF207
Description
2 Drawers
3 Drawers
4 Drawers
5 Drawers
Height"
28
40
53 1/2
65 1/2
Wt.
lbs.
100
137
178
217
Price
/Each
390.95
493.46
662.30
932.64
LATERAL FILES WITH LOCK
2-DOOR STORAGE UNITS
•
•
•
•
2-drawer lateral file storage
Locking mechanism and security key
Full extension drawers
Drawers are supported by heavy-duty
ball bearing slides
• 36" W x 22" D x 29" H
• American Cherry finish
• Shipped completely assembled
Model No. ON558
Price/Each $469.80
•
•
•
•
•
Thermally fused, scratch and stain resistant laminate
1" thick top and end gables
All surfaces have a 3 mm PVC matching edge
Adjustable floor leveling glides
Ready to configure with a variety of work-surface
and other storage components
• 35.4"W x 22"D x 29.5"H
• Weight: 74.8 lbs/33.9 kg
• American cherry finish
• Lock and keys included
• Tested to meet ANSI & BIFMA
desking standards
• Shipped completely assembled
Model No. ON559
Price/Each $362.88
4-IN-1 LATERAL FILE CENTRES
• Fully assembled, all-welded -piece design, no assembly required
• Combines lockable storage and filing in one compact unit
• Lateral file drawer features 100% drawer extension on progressive telescoping
ball-bearing slides providing smooth trouble-free operation
• Single lock system secures all drawers with one key (two keys included)
• Door locks separately (two keys included)
• Extra deep lateral file drawer accommodates
letter or legal size files
• 30" W x 18" D x 26" H
• Available in a
tough black or
putty powder
coat finish
MULTI STORAGE UNITS
•
•
•
•
•
•
•
Thermally fused, scratch & stain resistant laminate
Designed for quick and easy assembly
Fits under a work-surface or as free standing
35.4" W x 21.9" D x 28.5" H
Weight: 162 lbs/73.5 kg
American cherry finish
Tested to meet ANSI & BIFMA
desking standards
Model No. ON560
Price/Each $460.08
ON561
R33868E
Model
No.
ON561
ON562
OFFICE
PRODUCTS
1604-1611_Eng.indd 1605
INSTRUMENTS,
SCALES &
ELECTRICAL
SHIPPING &
PACKAGING
TOOLS &
EQUIPMENT
WELDING &
METALWORKING
Price
/Each
506.78
506.78
Description
Putty
Black
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1605
12-07-18 3:46 PM
FILING & STORAGE SYSTEMS
ENVIRASTOR® STOR/DRAWER®
FILE FOLDERS
• Economical & environmental:
100% recycled material and a minimum
of 67% post-consumer waste
• Sturdy internal liner in the outer
shell provides long lasting strength
• Attractive green graphics are printed on
the kraft background with water-based ink
• Recommended stacking 2-high on metal shelving
Other colours available
Model
No.
OA077
OA086
OA078
Record
Size
Cheque
Letter
Legal
Priced per box of 100
Inside Drawer Dim.
W"
x
D"
x
H"
9
x
24
x
4 1/2
12 1/4 x
24
x 10 1/2
15 1/4 x
24
x 10 1/2
Price
/Each
30.11
32.75
36.44
Description
1/2 CUT REVERSIBLE
9 1/2 pt Manila
9 1/2 pt Ivory
10 1/2 pt Ivory
STRAIGHT CUT
9 1/2 pt Manila
10 1/2 pt Ivory
Model No.
Letter
Price
/Box
Model No.
Legal
Price
/Box
OB762
OB761
OB765
22.15
27.66
21.83
OB764
OB763
OB766
27.66
22.14
29.34
OTD040
OTD056
24.39
23.81
OTD243
OTD258
29.62
30.51
STOREX STORAGE FILE DRAWER SYSTEMS
ECONO/STOR® BOXES
• Durable plastic construction with plastic
rollers on drawers for smooth operation
• Convenient built-in label holder
• Accommodates file
folders or hanging files
• Stackable up to 10 units high
with secure interlocking system
• Ideal for dust and mildew
control in schools, hospitals
and other public buildings
• Perfect choice for economical storage
of semi-active or dead records
• Features smooth rolled edges provides
a clean finish and avoids paper cuts
• The versatile OA081 can be adapted
to your needs, holding up to one cubic
foot of legal or letter size files
Model
No.
OE785
OE786
OE812
Record
Size
Letter
Letter
Legal
Inside Drawer Dim.
W" x D"
x H"
15 x 24 1/4 x 11 1/2
15 x 24 1/4 x 11 1/2
17 7/8 x 24 3/8 x 11 1/4
STORAGE BOXES
• Fits letter or legal size
• Dimensions: 12" W x 15" D x 10" H
Colour
Grey/Granite (Front)
Black/Grey (Front)
Grey/Granite (Front)
Inside Drawer Dim.
x
D"
x
x
24
x
x
24
x
x
15
x
H"
10
10
10
Price
/Each
21.55
25.27
11.91
STOW-AWAY® CRATES
STORAGE FILES
Stack up to 5 boxes high
Hanging folder rails included
Recycled material: 80%
Post-consuming: 51%
OTD753
Model No. OTD752
• Letter size
• 12 1/2" W x 23 1/4" D x 10 3/8" H
Price/Each $29.67
JANITORIAL &
MAINTENANCE
SAFETY
EQUIPMENT &
SUPPLIES
• Efficiently transports files, binders, office
supplies and tools while keeping materials
inside, safe, secure and orderly
• Perfect for travellers, this lightweight, yet
extremely durable compact solution
features a telescoping handle
and two solid rubber wheels
• Provides 1.2 cubic feet
of enclosed space and offers
a 50 lbs. weight capacity
• Entire unit compacts, folding
down to the size of a small
briefcase, fitting easily
under your vehicle seat
or airplane overhead
compartment
• Extended dimensions:
16 1/4" W x 14 1/2" D x 39" H
• Collapsed dimensions:
16 1/2" W x 3 1/2" D x 18" H
Model No. OK017
Price/Each $51.78
WELDING &
METALWORKING
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
R33892E
Model No. OTD753
• Legal size
• 15 1/2" W x 23 1/4" D x 10 3/8"
Price/Each $32.67
1604-1611_Eng.indd 1606
W"
12
15
12
Model No. OL953
Mfg. No. 125005
Price/Each $4.53
OA075
MATERIAL
HANDLING &
STORAGE
Record
Size
Letter
Legal
Letter or Legal
• Recycled content: 80%,
post-consumer waste: 59%
• Letter or legal size
• 12" x 15" x 10"H
• Assembly required
Model No. OA075
• 100% recycled material
• Stackable up to 350 lbs.
• 67% post consuming
• Comes with attached lid
Price/Each $8.13
1606
Model
No.
OA082
OA079
OA081
NOVEX STORAGE BOXES
OA087
Model No. OA087
• Wood grain finish
• Stackable up to 850 lbs.
• 59% post consuming
Price/Each $12.71
•
•
•
•
Price
/Each
49.82
49.84
59.71
INSTRUMENTS,
SCALES &
ELECTRICAL
OFFICE
PRODUCTS
12-07-18 3:46 PM
FILING & STORAGE SYSTEMS
VERTICAL FILING SYSTEMS
Ideal for filing blueprints, charts, artwork and other oversized documents. Cuts filing and retrieving time; saves on floor space. Exclusive suspension
system allows clamps to slip easily in and out of storage racks. Clamps open to 1" to hold up to 100 individual sheets (20 lbs. maximum weight per clamp).
HEAVY-DUTY MOBILE STANDS
VERTICAL FILING CABINETS
• Steel construction with four 3" ball
bearing swivel casters (2 lock)
• Holds 12 hanging clamps in pivot brackets
that swing open for easy access to contents
• Height adjusts from 43 5/8" to 61 5/8"
for sheets up to 54" long
• Base extends 27 1/2" to 37 1/2"
• Easy assembly
• Tropic sand finish
• All steel construction provides secure, high density,
bulk storage of reproductions
• Holds up to 12 hanging clamps
(clamps not included)
• Doors can mount for left
or right hand operation
• Locking handle
• Small cabinet holds
18" to 24" clamps
• Large cabinet holds
up to 36" clamps
• Colour: Tropic Sand
• Shipped assembled
Model
No.
OE129
OA195
OA196
OA213
OA197
Wt.
lbs.
47
61
63
65
67
Description
Mobile Stand Only
Mobile Stand c/w 12-24" Clamps
Mobile Stand c/w 12-30" Clamps
Mobile Stand c/w 12-36" Clamps
Mobile Stand c/w 12-42" Clamps
Price
/Each
760.13
1159.73
1237.81
1347.56
1391.88
PRINT-LOCK® HANGING CLAMPS
Clamp
pkg.
6
6
6
6
6
Description
18" Long Hanging
24" Long Hanging
30" Long Hanging
36" Long Hanging
42" Long Hanging
Wt.
lbs.
6
7
8
9
10
WIRE ROLL FILES
UPRIGHT ROLL FILES
R33871E
OFFICE
PRODUCTS
1604-1611_Eng.indd 1607
Tube
Size"
3 7/8 sq.
2 3/4 sq.
INSTRUMENTS,
SCALES &
ELECTRICAL
Price
/Each
160.20
178.80
208.20
253.60
272.30
Model
No.
OE132
OE133
Size"
3 3/4 x 3 3/4
2 3/4 x 2 3/4
Wt.
lbs.
9
10
Price
/Each
148.76
151.00
• The ideal form of active filing for
engineers, draftsmen,
surveyors and designers
• Materials store upright in square
fibreboard tubes; grandstand
design allows
different size rolls to
be stored in one file
• Sturdy, wood-core
construction with
laminate beige
vinyl covering
• Swivel casters
• Shipped knocked down
Tube Size"
3 3/4 x 3 3/4
2 3/4 x 2 3/4
2 3/4 x 2 3/4
7 x
7
No. of
Tubes
21
20
50
8
Overall Dimensions
W" x D" x H"
30 1/8 x 15 3/4 x 29 1/8
15 1/4 x 13 1/4 x 23 1/2
30 1/8 x 15 3/4 x 29 1/8
30 1/8 x 15 3/4 x 29 1/8
Wt
lbs.
52
22
53
46
Price
/Each
416.40
251.97
449.50
404.65
Look for this symbol
for environmentally
friendly products!
Price
/Each
90.43
92.58
SHIPPING &
PACKAGING
Tube
Description
12-Tube Storage
20-Tube Storage
MOBILE ROLL FILES
Model
No.
OA677
OA673
OA207
OE131
• Economical files keep drawings, blueprints
and charts organized and within easy reach
• Constructed of heavy- duty corrugated
fibreboard with walnut wood grain finish
• Tubes reinforced by plastic moulding
• Slotted hand hole in back
• 4 rubber feet
• O.A.: 22" H (12" high in front) x 15" W x 12" D
• Weight: 4 lbs.
• Shipped knocked down
No. of
Tubes
12
20
Price
/Each
928.80
1173.48
TUBULAR STEEL WIRE ROLL FILES
• Organize, protect and keep oversize
documents within ready reach
• Exclusive dustguard bottom
keeps materials clean and protects
edges from tearing and bending
• 2 different compartment heights;
four 8" x 8" storage bins
• Heavy-gauge steel rod construction
with white plastic coating; select
documents at a glance
• Swivel casters
• Dim.: 30 1/2" H x 16 1/4" W x 16 1/2" D
• Wt. 12 lbs
Model No. OA209
Price/Each $166.77
Model
No.
OA206
OA672
Wt.
lbs.
78
127
Description
Small Vertical File Cabinet: 42" H x 16" W x 27" D
Large Vertical File Cabinet: 54 1/2" H x 16" W x 39" D
• Low price, high quality appearance
• Light grey tubular steel frame
with chrome plated grids
• Twin wheel casters (2 lock)
• Dim.: 23 3/8" H x 18 1/3" W x 14 3/8" D
• Shipped knocked down
• Clamps hold up to 100 sheets or 20 lbs.
• Green plastic label holders included
• Available in natural aluminum with polished chrome plated cast
alloy wing knobs and black end caps
Model
No.
OE135
OE136
OE137
OE138
OE139
Model
No.
OB142
OB143
TOOLS &
EQUIPMENT
WELDING &
METALWORKING
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1607
12-07-18 3:47 PM
FILING & STORAGE SYSTEMS
STEEL PLAN FILES
• Welded steel construction, wrap
around corners and sturdy inner frame
• Front supports add stacking strength
• Files are modular so they can be used
individually or in a space saving stack
• Stack up to five high on a closed base
• Reinforced top offers additional
work and storage space
• 5 and 10 drawer files can be
mixed or matched for customized
high volume storage
• Choice of 6" closed
base or 20" high base
• Baked enamel finish in Tropic
Sand or Grey
• All flat files have museum/archival
quality point finish
OPTIONAL BASES FOR STEEL PLAN FILES
Closed Bases
• Holds up to five files
• Raises files 6" off ground
• Recessed 2 3/4"
OB151
High Bases
• Raises files 20" off the floor
and raises top of file to a
36" level to provide work space
• Enclosed back and sides
and open front provide
extra bookshelf space
OB169
Base sold separately
Model No.
Grey
Tropic Sand
OB146
OA651
OB148
OA186
OB151
OA220
OB158
OA189
OB161
OB162
OB165
OB166
OB169
OB170
OB173
OA653
OB176
OA204
OB179
OA187
5 DRAWER
10 DRAWER
• Versatile file stores up to 500 sheets per unit
active filing, 750 sheets of semi-active, or
1000 sheets of inactive material
• Five large capacity 2" deep drawers in three cabinet sizes
• Ideal for high traffic project storage areas
• Ten 1" deep drawers allow the easiest retrieval of materials from
the file and minimize material damage
Description
5 Drawer
5 Drawer
5 Drawer
10 Drawer
High Base for OB146 and OA651 Cabinets
High Base for OB148, OA186 and 10 Drawer Cabinets
High Base for OB151 and OA220 Cabinets
Closed Base for OB146 and OA651 Cabinets
Closed Base for OB148, OA186 and 10 Drawer Cabinets
Closed Base for OB151 and OA220 Cabinets
W"
37
43
50
43
Inside Drawer
x
D"
x
x
26
x
x
32
x
x
38
x
x
32
x
H"
2 1/8
2 1/8
2 1/8
1 1/8
W"
40 3/8
46 3/8
53 3/8
46 3/8
x
x
x
x
x
Cabinet
D"
29 3/8
35 3/8
41 3/8
35 3/8
x
x
x
x
x
H"
16 1/2
16 1/2
16 1/2
16 1/2
Wt.
lbs.
177
222
267
307
37
42
47
22
26
30
Price
/Each
1303.43
1510.15
1787.74
2666.65
549.65
586.29
610.72
249.92
268.71
337.31
Optional locks: OG362 -5 Drawer Units Price/Each $105.70 OG363-10 Drawer Files Price/Each $105.70
FACILTM FLAT FILE CABINETS
•
•
•
•
•
A unique version of our existing 5-drawer flat steel plan files
Offers similar functions yet more manageable features such as non locking, non archival and thinner gauge steel
Unit capacity is stackable 2 high on closed base and one high on high base
Colour: Light grey
Assembly required
OJ920
OJ918
Model
No.
OJ918
Description
Flat File Medium
Dimensions
W" x D" x H"
46 x 32 x 16 3/8
Wt. Price
lbs. /Each
135 1098.65
Model
No.
Description
OJ919 Closed Base
Dimensions
W" x D" x H"
36 x 29 7/8 x 4
Wt.
lbs.
25
Price
/Each
140.93
Model
No.
OJ920
Description
High Base
Dimensions
W" x D" x H"
46 x 31 7/8 x 20 3/8
Wt. Price
lbs. /Each
30 396.97
R33870E
1608
MATERIAL
HANDLING &
STORAGE
1604-1611_Eng.indd 1608
JANITORIAL &
MAINTENANCE
SAFETY
EQUIPMENT &
SUPPLIES
WELDING &
METALWORKING
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
INSTRUMENTS,
SCALES &
ELECTRICAL
OFFICE
PRODUCTS
12-07-18 3:47 PM
FILING & STORAGE SYSTEMS
E-Z SORT® MAILROOM FURNITURE
Modular mailroom furniture was created with efficiency and flexibility in mind. Modular units can be used in a wide variety of combinations.
Durably constructed of heavy-gauge steel to withstand the everyday rigours of a busy mailroom. All components feature grey baked enamel finish. Assembly required.
SORTING TABLES WITH SHELF
•
•
•
•
•
Table top is sturdy 1 1/8" thick wood laminate with tough T-mold edges
Table surface adjusts from 28" to 36" high
Supports up to 500 lbs. on extra-thick 1 1/2" steel legs
Includes: Shelf with 14" clearance and 150 lb capacity for additional storage space
Table and top sold separately–order both
Model
No.
OD938
OD939
Description
Base Table w/Shelf
Table Top
Colour
Grey
Grey
W"
60
60
x
x
x
D"
30
30
x
x
x
H"
28 to 36
1 1/8
Price
/Each
763.40
328.85
OD940
Sorter module
RISERS
• Supports one or more modules or can be used on a table for additional workspace
to accommodate scales, postage meters and off surface computer storage
Model
No.
OD941
Description
Riser
Colour
Grey
W"
57 1/2
x
x
D"
13
x
x
H"
14
Price
/Each
299.49
SORTER MODULES
•
•
•
•
•
Can be used as stand-alone or stacked
Extra-wide 11" mail trays that form any combination of up to 25 compartments
Shelves adjust in 7/8" increments
Additional mail trays available in cartons of 5
Includes: 20 moulded compartment trays, each with finger cut-out and label holder
Model
No.
OD940
Description
Sorter Module
Colour
Grey
W"
57 1/2
x
x
D"
13
x
x
H"
14 1/4
OD940
Sorter module
OD941
Riser
OD939
Table Top
OD938
Base Table
with Shelf
Price
/Each
522.63
DATA ORGANIZERS
•
•
•
•
•
•
Horizontal literature rack
All racks easily bolt together with fasteners provided
Steel modular, horizontal racks that can be grouped for floor or table mounted storage
Capacity for literature or directories up to three inches thick
8" legs (model CA159) available to raise unit off the floor
Tan enamel finish • Includes: Mounting clips
Specifications
Height"
Width"
Depth"
Opening Width"
Opening Depth"
Opening Height"
No. of Openings
Paper Width"
Price/Each
Model OA157
10 3/4
33 3/4
11 5/8
11
11 1/2
3
9
8 1/2
$152.52
Model OA168
14 1/4
33 3/4
11 5/8
11
11 1/2
3
12
8 1/2
$182.74
Can be stacked for
personalized use!
Model CA159
33 7/8
3 1/8
12 1/8
$73.83
CA159
(Base only)
OA168
OA157
VALUE SORTERS®
R33872E
• Economical yet sturdy
steel/corrugated
construction
• All steel exterior
and support shelves
• Wide shelf fronts
have label holders
for easy identification
of contents
(labels included)
• Quick-lock design for easy
assembly without tools
• Letter Size Compartments:
9 3/4" W x 12 1/2" D x 2 1/2" H
Model No.
Black
Grey
OA135
OA132
OA129
OA126
OA139
OA141
OFFICE
PRODUCTS
1604-1611_Eng.indd 1609
No. of
Compartments
24
36
72
Can’t find
what you’re
looking for?
Overall Dimensions
W" x D" x H"
32 1/4 x 13 1/2 x 25 3/4
32 1/4 x 13 1/2 x 38
32 1/4 x 13 1/2 x 75
INSTRUMENTS,
SCALES &
ELECTRICAL
SHIPPING &
PACKAGING
Wt.
lbs.
26
36
61
TOOLS &
EQUIPMENT
Call us
today!
Price
/Each
231.37
271.30
462.74
WELDING &
METALWORKING
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1609
12-07-18 3:47 PM
FILING & STORAGE SYSTEMS
ALL STEEL
BOOKCASES
CLEAR LITERATURE DISPLAYS
• These wall mountable displays
are made of optically clear,
break-resistant plastic for ultimate durability
• High quality, single piece thermo-formed units
• Screws and anchors are included
• Pocket depth of 1 7/8" for magazines or pamphlets.
• Shipped assembled
and ready to use
• Heavy gauge shelves
are adjustable on 2"
increments allowing
numerous configurations
Pocket Dimensions
• Pamphlet: 4 1/4" W x 9 3/4" H x 1 7/8" D
• Magazine: 9 1/4" W x 12 1/2" H x 1 7/8" D
OD303
Black
OA487
OA490
OA484
OA492
OA036
Model No.
Grey
OA488
OA491
OA485
OA493
OA481
Dimensions
W" x
D"
x H"
36 x
13
x 29
36 x
13
x 40
36 x
13
x 52 1/2
36 x
13
x 66
36 x
13
x 78
Putty
OA489
OA486
OA037
OA034
OA483
No. of
Openings
2
3
4
5
6
Wt.
lbs.
46
58
76
89
102
Price
/Each
190.90
227.82
320.34
379.46
436.47
OD308
OD297
LAMINATE BOOKCASES
• Oak finish
• Fully assembled
OD307
OD298
OD309
OD306
Model
No.
OK365
OK366
OK367
OK368
W"
36
36
36
36
x
x
x
x
x
Dimensions
D"
x
12
x
12
x
12
x
12
x
No. of
Shelves
1
3
4
5
H"
30
48
60
72
Price
/Each
157.00
198.38
239.76
280.27
WOOD BOOKCASES
MATERIAL
HANDLING &
STORAGE
1604-1611_Eng.indd 1610
Shelves
4 (3 Adjustable, 1 Fixed)
5 (4 Adjustable, 1 Fixed)
JANITORIAL &
MAINTENANCE
Dimensions
W" x D" x H"
36 x 12 x 48
36 x 12 x 72
SAFETY
EQUIPMENT &
SUPPLIES
Dimensions
W" x
H"
30
x 36 7/8
21
x 22 5/8
30
x 34 3/4
30
x
45
30
x
49
30
x 20 3/8
30 3/4 x 10 1/4
Price
/Each
335.00
217.75
322.39
366.78
375.24
227.26
160.66
PORTABLE LITERATURE DISPLAYS
Carrying Case
Folded
Price
/Each
177.89
234.00
WELDING &
METALWORKING
R33873E
1610
Honey
OK061
OK064
Pamphlets
4
6
12
12
6
Model No. OG448
Price/Each $201.79
OK060
Model No.
Black
OK060
OK063
No. of pockets
Magazines
9
2
6
6
12
-
• Constructed of heavy
gauge steel
• Easy and ready to use,
this portable literature
rack is a breeze to set up
• Ideal for trade shows, stores,
offices and reception areas
• Double-sided display features
six literature pockets
• Dimensions:
9 7/8" W x 13 1/4" D x 59 1/4" H
• Folds down to 8" H;
and weighs only 19 lbs.
• Metallic grey powder
coat for style;
resists scratchiness
• Comes with convenient
carrying case with strap
• Gables and shelves are 11/16" thick
• Fully assembled
Mahogany
OK059
OK062
Model
No.
OD297
OD298
OD303
OD306
OD307
OD308
OD309
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
INSTRUMENTS,
SCALES &
ELECTRICAL
OFFICE
PRODUCTS
12-07-18 3:47 PM
FILING & STORAGE SYSTEMS
LITERATURE STORAGE RACKS
• Construction is of sturdy heavy gauge steel
• Provide a convenient and
compact way to store literature
• Most models accommodate 150 standard
8 1/2" x 11" sheets, while others are wider
to hold magazines and special forms
OA130
OA156
OA163
OA148
OC543
OA155
Rotating
Literature
Racks
Optional legs to
permit free standing as
illustrated are available for all
literature Racks.
Model No.
Putty
Grey
Tan
OC540
OA152
OA130
OC559
OA166
OA156
OC541
OA161
OA155
OC558
OA148
OA162
OC543
OA169
OA165
OC557
OA163
OA144
OC545
OA171
OA624
OC556
OA164
OA167
ROTATING LITERATURE RACKS
OC553
OA149
OA179
OC549
OA134
OA158
OC547
OA145
OA128
Black
OC536
OA607
OC537
OA125
OC539
OA609
OC544
OC555
W"
9 3/4
13 1/8
9 3/4
13 1/4
9 3/4
13 1/8
x
x
x
x
x
x
x
OC552
OC548
OC546
14 1/8
14 1/8
14 1/8
x
x
x
OC547
OC549
Overall
Openings
D"
x
H"
W"
x
D"
x
4 1/8
x 65 1/2
8 5/8 x
3/4
x
4 1/8
x 58 1/2
12 1/8 x
1
x
4 1/8
x
36
8 5/8 x
3/4
x
4 1/8
x
36
12 1/8 x
1
x
4 1/8
x
21
8 5/8 x
3/4
x
2
x 26 1/4
12 1/8 x
5/16
x
Optional Leg for 9 3/4" Wide Models (Sold Individually)
Optional Leg for 13 1/8" Wide Models (Sold Individually)
14 1/8
14 1/8
14 1/8
x
x
x
66
48 1/2
21 1/4
8 5/8
8 5/8
8 5/8
x
x
x
3/4
3/4
3/4
x
x
x
OC553
H"
8 1/2
8 3/4
8 1/2
8 3/4
8 1/2
5 5/8
Paper
Width"
8 1/2
12
8 1/2
12
8 1/2
12
No. of
Pockets
23
20
11
11
5
10
Wt.
lbs.
32
38
18
24
9
13
Price
/Each
143.90
208.59
83.84
147.65
60.30
91.18
26.41
32.00
8 1/2
8 1/2
8 1/2
8 1/2
8 1/2
8 1/2
92
46
20
136
92
47
660.95
485.64
326.52
WIRE LITERATURE DISPLAY RACKS
•
•
•
•
•
Welded wire construction
Open wire construction keeps material fresh, clean and easy to see
Full-view front displays literature, magazines or forms for fast selection
Generous 8 3/4" W x 1" D compartment size is ideal for 8 1/2" x 11" material
Charcoal powder coat finish
ROTARY FLOOR DISPLAYS
R26154E
• Each layer rotates independently for easy selection
• Five dual wheel casters (2 locking)
• Compact knock-down design, ideal for trade shows
Model No. OE632 Magazine Display
Model No. OE807 Brochure Display
Model
No.
OE632
OE807
Number of
Compartments
16
32
OFFICE
PRODUCTS
1604-1611_Eng.indd 1611
W"
15
15
INSTRUMENTS,
SCALES &
ELECTRICAL
x
x
x
Dimensions
D"
x
15
x
15
x
SHIPPING &
PACKAGING
H"
59
60
Wt.
lbs.
20
24
TOOLS &
EQUIPMENT
Price
/Each
225.82
248.40
WELDING &
METALWORKING
OE632
OE807
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1611
12-07-18 3:47 PM
KEY CABINETS & KEY CHAINS
KEY STORAGE CABINETS
DOUBLE KEY FILE/SECURITY SYSTEMS
• Organize and control your
office or warehouse with wall
mounted key cabinets
• Heavy gauge steel
construction with piano
hinged doors and
key panels – provide
a secure location for
key storage
• Industrial 19-gauge body with
18-gauge door on all models
except model OJ922, which
has a 20-gauge body
and 19-gauge door
• Durable beige powder
coated epoxy finish
• All models come with
numbered slots and
key tags
•
•
•
•
•
Sturdy, welded steel with piano-hinged door and key panels
Heavy-duty, 20-gauge steel body and 18-gauge steel door
Mount cabinet on wall (mounting screws included), or use on table or shelf
Cabinet includes a disc-tumbler lock with two keys
Includes: red octagon key tags (model OG894) and white
oval key tags (model OG895) same amount as key capacity,
cross reference key guide, key loan record sheet, key receipt
slip, brass key receipt holders and key collection envelopes
• The double key system insures proper security and avoids key loss
• How it works: the master key is fastened to the
red tag and filed permanently on a labelled hook;
duplicate keys are fastened to white tags
on the same hook; each key is indexed in
three ways: by hook number, alphabetically
by what the key opens and numerically
• When a key leaves the system, a receipt tag is filled
out and hung with the master key and all loans are
recorded in the key loan record sheet
OG893
OJ924
OG888
Model
No.
OJ922
OJ923
OJ924
OJ925
OJ927
OJ928
Description
30 Key Cabinet
60 Key Cabinet
120 Key Cabinet
240 Key Cabinet
500 Key Cabinet
Key Tags – 20/Pack
W"
8
10 3/4
13
16 1/2
18
Dimensions
D"
2 1/2
3
3 1/4
5
5 1/2
x
x
x
x
x
x
x
x
x
x
x
x
H"
12
12 1/4
17
20
25
Price
/Each
57.39
94.85
138.59
250.25
451.25
9.06
DESK DRAWER KEY TRAYS
Model
No.
OG884
OG886
OG887
OG888
OG889
OG890
OG891
OG892
OG893
W"
8
14
14
16 1/2
16 1/2
16 1/2
16 1/2
16 1/2
16 1/2
x
x
x
x
x
x
x
x
x
x
Dimensions
D"
2 1/2
3 1/8
3 1/8
5
5
5
5
5
5
x
x
x
x
x
x
x
x
x
x
H"
12 1/8
17 1/2
17 1/2
20 1/2
20 1/2
20 1/2
31 1 /8
31 1/8
31 1/8
Key
Capacity
30
60
90
120
180
240
300
390
460
Wt.
lbs.
6
14
15
20
26
28
42
46
49
Price
/Each
195.98
260.30
320.60
370.85
481.40
562.75
557.00
762.80
823.10
EXTRA KEY TAGS & ACCESSORIES
Model No.
OG894
OG895
OG896
OG898
OG899
OG897
OG903
OG904
Description
Key Tag, Red Octagon, Numbered, 20/Pack
Key Tag, White Oval, Numbered, 20/Pack
Key Collection Envelopes, 100/Pack
Brass Receipt Holders, 100/Pack
Key Loan Record Sheets, 24/Pack
Cross Reference Index Binder, 30 to 80 Keys
Cross Reference Index Binder, 90 to 240 Keys
Key Receipt Slips, 250/Pack
KEY RACKS
•
•
•
•
Sturdy, lightweight, welded-steel key rack
Mounts on walls and doors in offices or warehouses
Dimensions: 13 3/4" W x 2 1/4" H
Includes: Numbered key tags, "out key"
control tags and mounting screws
• 20-key capacity
Model No. OG902
Price/Each $20.05
Price/Each
10.54
10.54
22.06
50.20
8.53
25.07
30.10
4.97
• Compact and portable, fits easily
into most desk drawers and safes
• Convert your office desk drawer
into a key control system
• Constructed of molded plastic,
making it light and durable
• Accommodates 56 keys
– 8 panels with 7 hooks each
• Each hook includes two key tags,
a self-locking tag for master
keys and a standard snap hook
key tag for duplicate keys
• Dimensions:
12" W x 9 7/8" D x 4 3/4" H
• Colour: Putty
• Weight: 5 lbs.
Model No. OG900
Price/Each $153.25
OG900
FILE DRAWER KEY RACKS
• Ideal for secure out-ofthe-way key control
• Sturdy, molded plastic,
40-key rack that comes complete
with numbered key tags
• Clamps on back allows for easy
attachment to rear of standard
office file drawers and
deep desk drawers
• Dimensions: 12" W x 1 3/4" D x 10" H
• Includes: Numbered key tags,
"out key" control tags and
key control chart
Model No. OG901
Price/Each $38.14
R25921E
OG901
1612
MATERIAL
HANDLING &
STORAGE
1612-1613_Eng.indd 1612
JANITORIAL &
MAINTENANCE
SAFETY
EQUIPMENT &
SUPPLIES
WELDING &
METALWORKING
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
INSTRUMENTS,
SCALES &
ELECTRICAL
OFFICE
PRODUCTS
12-07-19 8:08 AM
KEY CABINETS & KEY CHAINS
SUPER48TM KEY-BAK® KEY CHAINS
MID6 SERIES MID SIZE RETRACTORS #6
• Exclusive quick-draw extension
• Choice of two cable types: Kevlar®
or stainless steel, both 48"
• Corrosion-proof polycarbonate casing
• 8 to 10-oz. retraction force
• Large split ring to hold many keys
• Belt clip on back
• Model ON541 has a leather belt loop
• Ideal for maintenance, janitorial,
safety and security personnel
•
•
•
•
•
•
•
•
Model
No.
VE525
TLZ008
ON541
Mfg.
No.
S48
S48K
S48-LEK
Cable
Type
Stainless Steel
Kevlar®
Kevlar®
Price
/Each
23.19
18.05
19.99
SECURIT TM KEY-BAK®
KEY CHAINS
•
•
•
•
•
•
Mfg.
No.
488B
Price
/Each
18.88
THE ORIGINAL KEY-BAK®
•
•
•
•
•
Mfg
No.
5
Price
/Each
15.08
R32775E
OFFICE
PRODUCTS
1612-1613_Eng.indd 1613
SHIPPING &
PACKAGING
Price
/Each
18.98
36" nylon cord
Vinyl strap for identification cards (ID)
Made of ABS plastic
Tested in excess of 180,000 pulls
2-oz. retraction force
Belt clip
Ideal for maintenance and janitorial,
safety and security personnel,
identification and communication
Model
No.
ON545
•
•
•
•
•
•
Mfg.
No.
0485-821
INSTRUMENTS,
SCALES &
ELECTRICAL
Mfg.
No.
0487-002
Mfg.
No.
0057-005
Price
/Each
5.74
RETRACTABLE MINI-BAK® KEY RINGS
48" retractable Kevlar® cord
Chrome front
8 to 10-oz. retraction force
1 1/8" split ring
Belt clip
Ideal for maintenance, janitorial,
safety and security personnel
Model
No.
ON542
Price
/Each
10.86
48" stainless steel cable
Textured chrome front
Stainless steel mounting bracket
8 to 10-oz. retraction force
1 1/8" diameter split ring
Ideal for safety and security personnel
Model
No.
ON544
•
•
•
•
•
•
•
ORIGINAL KEY-BAK® SELF
RETRACTING REELS #485-HDK
•
•
•
•
•
•
Mfg.
No.
0006-001
RETRACTABLE MINI-BAK®
ID BADGE HOLDERS
Stainless steel chain extends to 24"
Pocket watch size
Chrome texture finish
2 1/2 oz. weight
With regular belt clip
Model
No.
TLZ009
Model
No.
ON543
SELF RETRACTING KEYCHAINS #487-HD
• 48" Kevlar® cord
• Rugged carabineer makes securing
the unit to almost anything easy
• Corrosion-proof polycarbonate casing
Model
No.
TLZ010
36" polyester cord
Tough polycarbonate case
6-oz. retraction force
360° rotating clip
1" nickel plated split ring
Holds 10 keys
Belt clip
Ideal for maintenance, janitorial,
safety and security personnel
Price
/Each
16.72
TOOLS &
EQUIPMENT
36" nylon cord
Made of ABS plastic
3/4" split ring
Tested in excess of 180,000 pulls
2-oz. retraction force
Ideal for maintenance and janitorial,
safety and security personnel,
identification and communication
Model
No.
ON546
WELDING &
METALWORKING
Mfg.
No.
0050-005
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
Price
/Each
5.74
MATERIAL
HANDLING &
STORAGE
1613
12-07-19 8:08 AM
TASK & OFFICE LIGHTS
RHINOMAG ILLUMINATED
FLUORESCENT MAGNIFIERS
FLUORESCENT INDUSTRIALDUTY MAGNIFIERS
• 5" diameter, 3-diopter lens which magnifies 1.75x
(for increased magnification,
see auxiliary lenses below)
• Heavy-duty spring balanced
arms extend 42" (107 cm)
• Instant on/off switch
• Bulb cover for safety
• Comes with 22 W circline fluorescent bulb,
spring covers and an industrial duty
clamp-on bracket "AA"
Model No. XC510
Price/Each $163.75
KFM SERIES
• Patented internal 45" spring arm offers
perfect balance and full adjustability
• 5" diameter, distortion-free lens
• Reflector optimizes light output and distributes
illumination evenly across the work area
• Electronic ballast increases
light output by 15%
• Secondary lens allows for a wide
variety of magnification tasks
• 22 W bulb (included) is protected by a
non-yellowing acrylic, splash guard/diff user
• Colour: Light grey
• 5-year limited warranty
Model No. XB951 3-diopter (1.75x)
Price/Each $432.37
Model No. XC617 5-diopter (2.25x)
Price/Each $450.76
AUXILIARY LENSES
Model
No.
XC512
XC513
Price
/Each
38.75
71.33
Description
5-Diopter Lenses, Replaces Supplied 3D Lens
8-Diopter Clip-On Lens, to be Used in Conjunction with 3D or 5D Lens
REPLACEMENT LAMP
Model No. XB172
Price/Case of 12 $84.22
ILLUMINATED FLUORESCENT
MAGNIFIERS
• 3-diopter, optical quality glass,
stadium lens, 7.5" (19 cm) x 6" (15 cm)
• Heavy-duty metal spring
balanced arms extend 42" (107 cm)
• Shade made of ABS plastic
• Two 9 W compact fluorescent
bulbs included
• Each bulb is independently switched
• Includes: Industrial-duty clamp-on
bracket "AA" auxiliary lenses
Model No. XC511
Price/Each $361.09
MAGNIFIERS
IFM SERIES
• Ideal medium-duty illuminated magnifier
• 5" diameter distortion-free lens in either
3-diopter (1.75x) or 5-diopter (2.25x) models
• Choice of 45" or 30" arm lengths
• Clamp or base mounts
• Fluorescent tube which provides
shadow-free illumination
• Built-in starter, the switch
does not have to be held
down for several seconds
to illuminate the tube
• 115 V AC
• Colour: Light grey
• Certified for sale in
Canada by an
accredited certification body
• Includes: Lamp diff user
cover, 3-wire cord, 22 W
fluorescent tube
Model
No.
XB947
XC225
Mfg.
No.
16345LG
16346LG
Arm
Length"
45
45
XC225
Model
No.
XC514
XC515
Diopter
3D
5D
Mount
Type
Edge
Edge
REPLACEMENT LAMP
MATERIAL
HANDLING &
STORAGE
1614-1615_Eng.indd 1614
JANITORIAL &
MAINTENANCE
Price
/Each
218.94
218.94
SWING ARM CLAMP-ON DESK LAMPS
•
•
•
•
Spring arm adjusts to many positions
Clamp to any surface
Durable baked enamel finish
Uses standard 100 W bulb
(not included)
• Colour: Black
• Certified for sale in Canada
by an accredited certification body
Model
Frame
No.
Colour
XA982
Black
XA983
White
REPLACEMENT BULBS
Model No.
XB117
XB118
SAFETY
EQUIPMENT &
SUPPLIES
Price
/Each
45.03
64.19
Description
Increases Magnification by 4-Diopters
Increases Magnification by 8-Diopters
WELDING &
METALWORKING
TOOLS &
EQUIPMENT
XA982
Light
100 W
100 W
Colour
Frosted
Clear
SHIPPING &
PACKAGING
Type
Incandescent
Incandescent
Light
100 W
100 W
INSTRUMENTS,
SCALES &
ELECTRICAL
Price
/Each
48.29
48.29
Price/Each
1.56
1.56
R33397E
Call us for all
your Office
Product
requirements!
XC511
AUXILIARY LENSES: Distortion free optical quality clip-on glass lens.
XB947
Model No. XB172
Price/Case of 12 $84.22
1614
XC514
OFFICE
PRODUCTS
12-07-18 4:20 PM
TASK & OFFICE LIGHTS
18 W TABLE LAMPS
•
•
•
•
•
Model
No.
XC780
XC781
18 W FLOOR LAMPS
XC780
Metal construction
Base rotary switch
Height: 27"
Base diameter: 6.5"
Bulb Dainovision
18 W CFL, included
•
•
•
•
•
XC781
Mfg.
No.
DVN080-ASK
DVN080-OBB
Price
/Each
192.73
192.73
Colour
Antique Satin Chrome
Oil Brushed Bronze
50 W HALOGEN
DESK LAMPS
Mfg.
No.
DLHA111-SV
Model
No.
XC782
XC783
XC782
Mfg.
No.
DVN080F-ASC
DVN080F-OBB
Price
/Each
154.55
154.55
Colour
Silver
Price
/Each
74.55
• Desk lamp with heavy
base and table clamp
• Rocker style switch
• Height: 20"
• Base diameter: 8"
• Bulb max. 40 W,
G9, included
XC785
Price
/Each
87.27
Colour
Silver
Model
No.
XC786
Mfg.
No.
DLH5001-SV
60 W DESK LAMPS
200 W EXECUTIVE WORK LAMPS
•
•
•
•
•
•
•
•
•
•
Heavy base for good stability
Height: 16"
Base diameter: 8"
Bulb max. 60 W, type A,
not included
Free-standing incandescent desk lamp
Hi/Low switch to vary light intensity
KD pleated shade and opaque glass diff user
Height: 25"
Base diameter: 7"
Bulb max. 200 W,
type A, DL200,
included
XC789
Model
No.
XC787
Mfg.
No.
HIL900-BK
•
•
•
•
•
•
Model
No.
XC788
XC789
XC790
XC791
Gives equivalent light output to a 75 W incandescent
Complete with heavy base and table clamp
Arm extends approximately 36"
Height: 43"
Oval base: 7.5" x 9"
Bulb max. 13 W mini
fluorescent, included
Model
No.
XC793
Mfg.
No.
ULT260-BK
OFFICE
PRODUCTS
1614-1615_Eng.indd 1615
INSTRUMENTS,
SCALES &
ELECTRICAL
XC791
Mfg.
No.
DM980-BK
DM980-WH
DM980-AB
DM980-SC
Price
/Each
103.64
103.64
116.36
116.36
Colour
Black
White
Antique Brass
Satin Chrome
Can’t find what
you’re looking for?
Price
/Each
103.64
Colour
Black
SHIPPING &
PACKAGING
XC790
Price
/Each
50.91
Colour
Black
13 W ENERGY EFFICIENT &
FLEXIBLE DESK LAMPS
R33396E
Colour
Antique Satin Chrome
Oil Brushed Bronze
60 W DESK LAMPS
• All plastic construction
• Hi/Low switch allows two
levels of light intensity
• Height: 22"
• Base diameter: 5"
• Bulb max. 50 W, 12 V
halogen, included
Model
No.
XC785
XC783
Metal construction
On line foot switch
Height: 59"
Base diameter: 11"
Bulb Dainovision
18 W CFL, included
TOOLS &
EQUIPMENT
Call us today!
WELDING &
METALWORKING
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1615
12-07-18 4:20 PM
GENERAL OFFICE SUPPLIES
DRY ERASE MESSAGE SIGNS
CORKBOARDS
A. ARROW DIRECTIONAL SIGNS
ON593
Model
No.
ON593
ON594
ON595
ON596
ON597
OE765
• Attention getting signs are a practical
addition to any front office or reception area
• Durable porcelain on steel white
board is ideal for use with magnets
• Floor display models have an 18"
wide base that can be weighted
down with water or sand
• For indoor or outdoor use
• Ideal for office or
warehouse environments
• Sturdy aluminum frame
• Plastic-molded corners
protect the boards and
wall from damage
• Double-sided cork
for added durability
• Position sign up, down, left,
or right; adjusts + or – 45˚
Wt.
lbs.
3.5
6
10.5
18
30
Dimensions”
18 x 24
24 x 36
36 x 48
48 x 72
48 x 96
Price
/Each
21.50
33.55
55.15
146.00
179.00
CORKBOARD ACCESSORIES
Model
No.
OE765
Price
/Each
149.00
Size"
25 x 17 3/4 x 64 1/4
B. RECTANGULAR SIGNS
• Dry erase surface
Model
No.
OE766
18
Size"
x 18 x
65
Price
/Each
149.00
65
Price
/Each
149.00
OE766
C. OCTAGONAL SIGNS
PUSH PINS
• Dry erase surface
Plastic head, assorted colours. 100/pkg.
Price per package
Model
No.
OE767
Model No. OJ472
Price/Each $2.79
OE767
Size"
22 1/2 x 18 x
WHITE BOARDS
• White writing surface provides
clean, colourful display
• Effortless erasing, wipes
clean with cloth or felt brush
• Aluminum frame
• Plastic corners for board
and wall protection
CHALKBOARDS
Smooth surface guarantees clear,
legible writing and easy erasing. Natural
aluminum frame; square corners. Green
writing surface.
Model
No.
Dimensions"
OA478
18 x 24
OA479
24 x 36
OA031
36 x 48
OA477
48 x 72
Wt.
lbs.
3.5
7.0
12.5
23
Price
/Each
26.82
41.45
68.14
175.40
NONMAGNETIC
ACCESSORIES
Model
No.
OC381
OC383
Price
/Each
2.45
3.75
Description
Chalk, White (12/bx)
Chalk Eraser
VISUAL COMMUNICATION FRAMES
Dimensions"
18 x 24
24 x 36
36 x 48
48 x 72
48 x 96
MAGNETIC
Wt.
lbs.
3.25
6
10.5
18
30
Price
/Each
16.50
24.75
41.95
103.00
125.00
Model
No.
ON535
ON536
ON537
•
•
•
•
•
•
COVERED DIRECTORY BOARDS
• Temporary marks for measurement and cutting
• Colour-coding or to identify various shifts or operators
1616
Dimensions
H" x W"
36 x 24
MATERIAL
HANDLING &
STORAGE
1616-1619_Eng.indd 1616
Wt.
lbs.
34
JANITORIAL &
MAINTENANCE
Wt.
lbs.
6
10.5
18
Price
/Each
71.25
118.00
310.00
Industrial strength felt-tip ink markers for temporary marking applications
Mark can be removed quickly and easily with dry rag, towel, or eraser
No residue or ghosting after mark is removed on most industrial surfaces
Suitable for any non-porous surfaces
Will not scratch painted surfaces
Suitable for surfaces that require a low-chloride /low halogen
specification 1/8" bullet felt-tip makes solid, opaque, visible mark
Ideal for:
• White board marking in offices and factories
MANUFACTURING
• On production lines for temporary parts
identification, quality control and record keeping
• At workstations for job requirements and work schedules
Price
/Each
579.86
SAFETY
EQUIPMENT &
SUPPLIES
FABRICATION
Model
No.
PE773
PE774
PE775
PE776
WELDING &
METALWORKING
Price
/Each
1.98
1.98
1.98
1.98
Description
Red
Black
Blue
Green
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
INSTRUMENTS,
SCALES &
ELECTRICAL
R34853E
Model
No.
OA471
Dimensions"
24 x 36
36 x 48
48 x 72
DURA-INK® DRY ERASE INK MARKERS
• Standard or customized formats
• Completely waterproof;
no maintenance necessary
• Part of poster that is hidden: 1/8" (3 mm)
• Maximum thickness of poster: 1/4" (6 mm)
• Overall size: poster's size + 3 1/4" (8 mm)
• Our frame can also be
drilled for screw mounting
• All the frames are sold
with a strong 3M adhesive
for wall or window mounting
• Applications: indoor, outdoor, hanged,
double-sided (on window) and on light-box
• Size: 8 1/2" x 11"
• Colour: Silver
Model No. OG403
Price/Each $122.61
Locking glass door on hinges provides a professional appearance,
deters unauthorized access to messages. Felt grooved black
surface. 1/4" plexiglass in aluminum frame.
ON593
Model
No.
ON530
ON531
ON532
ON533
ON534
OFFICE
PRODUCTS
12-07-23 8:47 AM
GENERAL OFFICE SUPPLIES
HOOK & LOOP FASTENERS
SUGGESTION BOXES
Alternative to zippers, screws, snaps and bolts. One nylon strip consists of tiny hooks and
another consisting of soft pliable loops. Simply press together to fasten and pull apart to
open. Current applications include the apparel, furniture, packaging and printing industries.
Available in peel and stick adhesive backed models or regular style (sew-on) models.
• Locking suggestion box invites
confidential ideas and comments
• Comes with 25 suggestion cards, two keys
and front panel adhesive labels marked
"Suggestions", "Comments"
or "Key Drop"
• Set on tabletop or mount to
any wall (hardware included)
• Suggestion card refill pack – 25 cards/pack
sold separately (Model No. OE811)
• 7 1/8" W x 6" D x 8 1/2" H, with a 4 3/4" x 1/8" deposit slot
• Black powder coat finish
Model No. OE810 Price/Each $67.26
OC471
OE811
SUGGESTION CARDS, 25/PKG
OC439
Model No. OE811
Hook
Loop
White Black
White
Black
PEEL & STICK ADHESIVE BACKED
OC439 OC440
OC441
OC442
OC500 OC501
OC502
OC503
OC447 OC448
OC449 OC450
OC504 OC505
OC506 OC507
REGULAR  SEWON
OC455 OC456
OC458
OC508 OC509
OC510
OC511
OC463 OC464
OC465 OC466
OC512 OC513
OC514
OC515
ADHESIVE BACKED DOTS
OC471 OC472
OC473
OC474
OC475 OC476
OC477
OC478
OC483 OC484
OC485 OC486
Width"
Length
yds
Price
/Each
3/4
1
3/4
1
10
10
25
25
17.69
19.70
44.64
45.30
3/4
1"
3/4
1"
10
10
25
25
8.73
9.59
20.61
23.63
1/2
3/4
3/4
500
500
2110
22.94
45.00
169.85
COAT/HAT RACKS
Price/Each $8.48
MODETM WOOD WALL COAT RACKS
WITH HANGERS
• Organization for garments
• Wood side panels, in black or mahogany are
connected by three matte silver bars which
provide an additional storage shelf
Includes: 12 brushed chrome theft deterrent
hangers and mounting hardware
Model No.
Black
Mahogany
OJ997
OJ998
OJ999
OK066
Description
36" with hangers
48" with hangers
Finished Product
Dimensions
37 1/2" W x 17 1/2" D x 13" H
49 1/2" W x 17 1/2" D x 13" H
A.
A. SHELF RACKS WITH HANGERS
D.
Contemporary coat rack has 12 non-removable hangers;
prevents loss or misplacement. Chrome finish. Mounting
hardware included.
Model
No.
OE017
Description
49" W x 14" D x 19" H
Price
/Each
158.55
177.77
Wt.
lbs.
13
C.
Price
/Each
135.06
B.
B. & C. VALET COAT RACKS & HANGERS
• Available in plastic. Hangers are black
finish with a plastic coated cross bar
• Available in 12 coat capacities. Heavy
gauge steel construction. Hangers included
Model No.
Black
Description
B. HANGERS
OTJ331
Plastic, Black Finish, 12/Pack
C. VALET COAT HANGERS
OE831
12 Coat Valet
36" W x 15" D x 63" H
Wt.
lbs.
Price
/Each
D. STEEL COAT TREES
All steel black coat tree. 63" high.
49.85
658.85
45
Model
No.
OE843
OK065
Description
Black
Chrome
R33898E
OVER THE PANEL SINGLE HOOKS
OFFICE
PRODUCTS
1616-1619_Eng.indd 1617
INSTRUMENTS,
SCALES &
ELECTRICAL
SHIPPING &
PACKAGING
Price
Each
103.77
107.69
Call us for
quantity
pricing!
• Versatile fit accommodates panels 1 1/2" up to 3 1/4"
• Rounded knobs protect fabrics,
plastic coat hooks keep garments
looking clean and wrinkle free
• Six per package
• Includes mounting hardware
concealed within the hook
Model No. ON529
Mfg. No. 4224BL
Price/Each $110.00
D.
C.
Wt.
lbs.
12
12
TOOLS &
EQUIPMENT
WELDING &
METALWORKING
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1617
12-07-23 8:47 AM
GENERAL OFFICE SUPPLIES
TIME CLOCKS
WALL CLOCKS
•
•
•
•
•
Large, easy-to-read analog clock face
LED display of year, month and date
Automatic or manual printing
Print window with light
Automatically adjusts for Daylight
Savings Time, short months,
leap years and power outages
• Selectable for 4-digit imprint
• Built-in battery backup
12/24 H BATTERY OPERATED
• 12" diameter round
office wall clock
• 12/24 hour
• Glass face
• Black chrome frame
Model No. HT072
Price/Each $38.35
SPECIFICATIONS:
Power Supply:
Power Consumption:
Ambient Temp.:
Humidity:
Dimensions:
Weight:
Model
No.
HN140
HT072
110/120 AC ± 10% (50/60 Hz)
Normal 3 W, Max. 12 W
14 °F - 113 °F (-10 °C - 45 °C)
10 % - 90 % (no condensation)
6 3/4" W x 6 1/4" D x 8" H
(150 x 172 x 165 mm)
6 lbs. (2.7 kg)
BATTERY OPERATED
• 14" diameter quartz clock
• Silent quartz movement
with second hand
• Use 1 AA battery
• Plastic face
• Chrome frame
Model No. HT071
Price/Each $46.14
Price
/Each
419.00
Description
English
Note: Available in 220/240 V AC on special order only
TIME CLOCKS
HT071
• Manual or automatic print
• Selectable imprints: year (4 digit), month, date and time or notation
• Selectable print format: year, month and date or Julian date; day or date;
AM/PM or 0-23 hours; regular minutes or 100th of an hour
• Right or left side printing
• Desk or wall mount
• Fast, easy set-up of date,
time, print format, etc.
• Easy-to-replace ribbon cartridge
• Easy-to-read LCD display
• Automatic adjustment for
Daylight Saving Time
• Quartz clock accuracy
• Built-in lithium battery backup
protects clock and program data
in the event of power failure
• Fast, quiet dot matrix printing
• Selectable notations: RCV'D, SENT, FAX'D,
VOID, PAID, CFM'D APR'D, CMPL'D, ORIGN, FILE
Model
No.
HN164
120 AC ± 10 %, 60 Hz
Normal 3 W, Max. 6 W
14 °F-113 °F (-10 °C - 45°C)
10 % - 90 % (no condensation)
5.5" W x 6.5" D x 6" H (150 x 140 x 165 mm)
4.2 lbs. (1.8 kg)
Price
/Each
373.00
Description
English
TIME CLOCK
ACCESSORIES
HX019
TAKE-A-NUMBER SYSTEMS
•
•
•
•
SPECIFICATIONS:
Power Supply:
Power Consumption:
Ambient Temp.:
Humidity:
Dimensions:
Weight:
ELECTRIC CLOCKS
• 12" diameter round
office wall clock
• 12/24 hour
• Plastic face
• Black frame
Model No. HX019
Price/Each $67.27
Provides fair, organized, efficient customer service
Enhances the customer's perception of quality
Assures customers their turn for service
Used in supermarkets, retail stores, specialty shops, post offices, tourist
information centres, travel bureaus, banks, hair salons, insurance companies,
trade fairs, ticket sales offices, embassies, restaurants, and utility companies
• Kit includes: 2-number segment display
Power supply (12 V AC)
6 rolls of yellow tickets (4000/roll)
Dispenser (D900)
Counter stand with sign
Push buttons and wires (1+, 1-)
Model No. OG421
Price/Each $701.97
HA004
• Card rack is adjusted for
standard 8 1/4" long cards
• Fits 25 standard time cards
• Rack is adjustable to
accommodate cards
of different widths
HA001
1618
Description
Card Rack
1000 Time Cards, English
1000 Time Cards, French
Replacement Ribbon for Time Clock
MATERIAL
HANDLING &
STORAGE
1616-1619_Eng.indd 1618
JANITORIAL &
MAINTENANCE
Price
/Each
59.00
60.00
60.00
24.25
SAFETY
EQUIPMENT &
SUPPLIES
R20512E
Model
No.
HA004
HA001
HA020
HN141
WELDING &
METALWORKING
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
INSTRUMENTS,
SCALES &
ELECTRICAL
OFFICE
PRODUCTS
12-07-23 8:48 AM
GENERAL OFFICE SUPPLIES
P-TOUCH® LABELING SYSTEMS
P-Touch® electronic labeling system creates professional adhesive-backed labels for every business application.
PT2100 PCCONNECTABLE LABELING SYSTEMS
PT2730 PCCONNECTABLE
"SIMPLY PROFESSIONAL" LABELING SYSTEMS
•
•
•
•
"USB Ready" to easily connect to your PC
16 character x 3 lines LCD display for easy viewing and editing
Prints up to 5 lines in 4 fonts, 7 font sizes, 10 type styles and 92 different symbols
Built-in auto templates and bar codes and ability to add graphics, logos, pictures and
bar codes to easily create custom labels
• Print labels from Microsoft Word®, Excel® and Outlook®
• Built-in memory: save up to 9 of your most commonly used labels
• Automatic cutter
• Preview key allows you to check your text before printing
• Tape sizes: 9/64", 1/4", 3/8", 1/2", 3/4"
• Operates on the included AC adapter or
6 AA alkaline batteries (not included)
• Includes: AD-24 AC adapter,
1/2" TZ black on white laminated
starter tape, P-Touch Editor
software, user manual
and warranty
Model No. OJ938
Price/Each $115.00
• Use as stand-alone labeler, or connect to
PC or Mac via USB for added functionality
• Large, 16-character x 3 lines graphical display
with vivid backlit design for easy viewing
• Creates big, bold, durable, laminated labels
in a variety of colours and sizes - up to 24 mm wide
• New, built-in label collection feature offers pre-designed
labels for files, office signage, shipping labels and more
• New download feature allows access to additional label collection files
• New text reminder feature recalls frequently printed
words – making label creation quick and easy
• Prints up to 7 lines of text on each label
• Select from 8 fonts, 10 type styles, and 17 frames
• Save and print up to 99 of your favourite labels
• Sleek, modern design with
built-in automatic cutter
• Complete kit includes: AC adapter, P-touch
Editor software and drivers, USB cable,
0.94" (24 mm) starter "TZ" laminated tape,
user's manual
Model No. OK204
Price/Each $149.98
AA BATTERIES, PACK OF 24
Model No. XB872
Price/Each $18.08
AA BATTERIES, PACK OF 24
Model No. XB872
Price/Each $18.08
"TZ & TZE ECOFRIENDLY" SERIES TAPE CARTRIDGES FOR PTOUCH®. ALL "TZ & TZE" SERIES TAPES ARE 8 M 26.2' LONG.
Model No.
9 MM 3/8"
Series
Colour
Price/Each
OB648
OB650
OB651
OB655
OB667
12 MM 1/2"
TZe
TZe
TZe
TZe
TZe
Black on Clear
Black on White
Blue on White
White on Black
Red on White
17.07
19.59
20.09
23.10
20.09
OB649
ON443
OB653
OB656
OB657
OB668
TZe
TZe
TZe
TZe
TZe
TZe
Black on Clear
Black on White
Blue on White
White on Black
Black on Yellow
Red on White
20.09
22.06
21.09
25.11
21.05
21.09
Model No.
18 MM 3/4"
Series
Colour
Price/Each
OB661
OB654
OB663
OB662
OB666
OB669
24 MM 1"
TZe
TZe
TZe
TZe
TZe
TZe
Black on Clear
Black on White
Blue on White
White on Black
Black on Yellow
Red on White
23.10
25.07
25.11
33.15
25.11
25.11
OB658
OB659
OB664
OB665
OB660
OB670
TZe
TZe
TZe
TZ
TZe
TZe
Black on Clear
Black on White
Blue on White
White on Black
Black on Yellow
Red on White
26.12
29.09
29.13
32.15
29.09
29.13
PT1650 CUSTOMIZABLE INDUSTRIAL
HANDHELD LABELING SYSTEMS
Durable and rugged handheld labeler uses new flexible ID tape and rotated print for cable
wrapping and flagging, industrial strength laminated tapes for patch panel labeling and
standard laminated tapes for faceplate labeling.
Memory functions to store frequently used label designs, easy entry keyboard and large
display for quick editing. Auto sizing, sequential numbering, repeat printing, and vertical style
for quick labeling. Auto power off feature helps to save battery life.
FEATURES
IDEAL FOR:
•
•
•
•
•
Telecom/Cabling
Asset Management
Property Management
Manufacturing
General office
Model No. ON547
Price/Each $250.00
R33890E
• Portable and rugged design
• Download custom templates (with a database),
and graphics to internal, non-volatile memory
• Prints labels from 6 mm to 24 mm wide
• Built-in telecom/datacom templates - wire/cables,
patch panels, faceplates
• Makes rotated, vertical and horizontal labels
• Prints industry-standard bar codes
• Uses easy-swap interchangeable TZe tape cassettes
• Includes: Extra strength and flexible ID TZe tapes, tape
separator, batteries, rubber impact guards and carry case
OFFICE
PRODUCTS
1616-1619_Eng.indd 1619
INSTRUMENTS,
SCALES &
ELECTRICAL
SHIPPING &
PACKAGING
TOOLS &
EQUIPMENT
WELDING &
METALWORKING
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1619
12-07-23 8:48 AM
GENERAL OFFICE SUPPLIES
FOLDING OFFICE CARTS
MOBILE REFRESHMENT CENTRES
• Sturdy steel cart has two shelves,
folds away when not needed,
and quickly sets up for use
• Top shelf is 26" W x 15" D,
lower shelf is 22" W x 15" D
with a 1/4" rim
• Can be used
as a beverage cart
• For compact storage,
simply fold top and
bottom shelves up,
legs in, then fold top down
• Mobile on four 3" diameter
dual wheel casters (two locking)
• Capacity: 30 lbs. per shelf
Model No. OK023
Price/Each $223.15
• Ample storage capability for your
day-to-day break room supplies
• Easily move the cabinet wherever
it is needed in the office on four
2" swivel casters (2 locking)
• Wood laminate construction,
double-door design with a fixed
interior and storage shelf,
a large heat-resistant counter top
with a 1 1/4" raised lip to catch spills
• Work surface (top) dimensions:
21 1/2" W x 17" D
• Finished product dimensions:
23" W x 18" D x 31" H
• Shelf capacity: 60 lbs.
• Total capacity: 200 lbs.
• Easy assembly with cam-lock fasteners
COMPACT REFRIGERATORS
Model
No.
OK018
OK019
OK020
Danby's large capacity, classic compact fridges offer plenty of additional refrigeration
in a compact footprint. Suitable for offices, dens and workshops, this 4.3 cu. ft.
model includes Danby's patented Canstor® beverage dispenser, full width freezer
section and tall bottle storage.
• Large 4.3 cu. ft. capacity
compact fridge
• Mechanical thermostat
• Make ice or store frozen items
in the compact freezer section
• No hassle push button defrost
• Convenient Canstor® beverage
dispensing system
• 2.5 wire shelves for
maximum storage versatility
• Tall bottle storage - great
for large soda bottles
• Reversible door swing for convenient
left or right hand opening
• Integrated door handle
• Smooth back design
• 20 1/2" W x 21 1/16" D x 32 11/16" H
• Weight: 68.34 lbs.
• Available in White or
Black with Stainless Steel
Model
No.
OE400
OM293
Price
/Each
310.70
310.70
310.70
OK018
COMMERCIAL-DUTY MICROWAVES
MEDIUMDUTY VOLUME
Price
/Each
320.00
337.90
Description
White
Black w/stainless steel
Description
Grey w/grey top
Mahogany w/mahogany top
Medium Oak w/white top
• 1000 Watts of power for fast heating, 120 V
• 1.2 cubic foot capacity easily accommodates prepackaged foods,
single servings or up to a 14" platter
• Up to 10 programmable menu items
simplifies cooking and ensures consistent
results
• Five power levels
• User-friendly controls are easy to use
making it ideal for self-serve sites
• Time entry option for added flexibility
• Digital display with countdown timer for
simple operation and easy at-a-glance
monitoring
• See-through door and lighted interior for
easy monitoring of food without opening the door
• Removable air filter with automatic clean filter reminder
protects oven components from grease laden air
• Durable Stainless Steel exterior and interior for easy cleaning
• 22" W x 19" D x 13 3/4" H
• Shipping weight : 48 lbs.
• cUL us listed
• Limited 3-year warranty
Model No. OD879
Price/Each $652.25
MEDIUMDUTY VOLUME
COFFEE STIR STICKS
Model
No.
OD036
OD037
Description
Coffee stir sticks, 4 1/2" plastic, 1000/box
Coffee stir sticks, wood, 1000/box
OD036
Price
/Each
3.63
3.95
GLASS DECANTERS
1620
Description
Glass decanter
Filters 1000/pkg.
MATERIAL
HANDLING &
STORAGE
1620-1625_Eng.indd 1620
JANITORIAL &
MAINTENANCE
Price
/Each
15.50
14.77
SAFETY
EQUIPMENT &
SUPPLIES
R33900E
Model
No.
OB828
OK077
OB828
• 1000 Watts of power for fast heating, 120 V
• 1.2 cubic foot capacity easily accommodates prepackaged foods,
single servings or up to a 14" platter
• Up to 100 programmable menu items simplifies
cooking and ensures consistent results
• Five power levels
• X2 multiple quantity pad
calculates the proper cook
times for multiple portions
• User-friendly controls are easy to use
making it ideal for self-serve sites
• Time entry option for added flexibility
• Digital display with countdown timer
for simple operation and easy at-aglance monitoring
• Removable air filter with automatic clean filter reminder
protects oven components from grease laden air
• Durable stainless steel exterior and interior for easy cleaning
• 22" W x 19" D x 13 3/4" H
• Shipping weight : 48 lbs.
• cUL us listed
• Limited 3-year warranty
Model No. OD880
Price/Each $899.48
WELDING &
METALWORKING
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
INSTRUMENTS,
SCALES &
ELECTRICAL
OFFICE
PRODUCTS
12-07-26 2:36 PM
GENERAL OFFICE SUPPLIES
KITCHEN
SUPPLIES
OE809
OD034
OD030 - OD031
Model
No.
OD030
OD031
OD032
OD033
OD034
OK074
OK075
OE809
Price
/Each
23.81
27.98
50.69
32.96
3.36
90.40
120.64
56.90
Description
Styrofoam cups 7 oz capacity, 1000/pkg
Covers for 7 oz cups, 1000/pkg
Styrofoam cups 9 oz capacity, 1000/pkg
Covers for 9 oz cups, 1000/pkg
Paper cups, conical, 4 oz cap. 200/pkg
Plastic cups, clear, 7 oz cap. 2000/pkg
Plastic cups, clear, 10 oz cap. 1500/pkg
Paper cup, dispenser, stainless steel
STRAWS
PACKAGING FILM
• 8" standard
• 500/box
Model No. OD038
Price/Each $3.95
• Multipurpose,
comes in a practical
dispenser box
• 11" x 2500' roll
Model No. OD048
Price/Each $20.05
ALUMINUM FOIL
Model
No.
JC906
Folded Size
L" x W"
5 x 6.5
5 x 6.5
Napkins Dispenser Price
/Case
Options /Case
6000
JC015
91.84
6000
JC015
93.39
SERV-RITE LL NAPKIN DISPENSERS
R33899E
Mfg.
No.
2576
OFFICE
PRODUCTS
1620-1625_Eng.indd 1621
Colour
Smoke black
L"
8
Dimensions
L" x W"
10.8 x 8.7
Ply
2
Sheets
/Roll
90
Model
No.
JC027
JC028
Mfg.
No.
Colour
101756 Natural
1340
Ivory
JC029 1767
JC030 1769
JC031 1870
Natural
White
Mocha
JC030
Brand
Ply
Décor
1
North River 1
Dimensions
L' x W"
205 x 8
700 x 8
Décor
Décor
North River
425
425
700
1
1
1
x
x
x
8
8
8
UNIVERSAL
ROLL TOWEL
DISPENSERS
Rolls
/Case
24
Price
/Case
40.37
SHIPPING &
PACKAGING
Paper
Options
JC013, JC014
TOOLS &
EQUIPMENT
Price
/Each
56.49
Model Mfg.
No.
No. Colour
JC102 1137 Grey
WELDING &
METALWORKING
Description
Roll towel
dispenser
SAFETY
EQUIPMENT &
SUPPLIES
Rolls
/Case
24
6
12
12
6
JC031
Dispenser
Option
JC101, JC102
JC101, JC102,
JC103, JC104
JC101, JC102
JC101, JC102
JC101, JC102,
JC103, JC104
Price
/Case
32.57
52.28
39.07
40.46
48.31
SEE PAGE 343
FOR MORE
DISPENSERS
• See-through construction allows
quick and easy service checks
• High capacity reduces labour
and maintenance costs
• No touch models help to
control germs and reduce
risks of cross-contamination
Dimensions
x W" x H"
x 7.25 x 15.75
INSTRUMENTS,
SCALES &
ELECTRICAL
Colour
White
• Long-lasting rolls minimize maintenance
costs while maximizing service
• Embossing enhances hand feel
and maximizes absorbency;
fewer towels are used per hand dry
• Eco-LogoM certified,
Green Seal certified®,
and Chlorine Free®
• Constructed of ABS plastic,
will not scratch or dent
• Designed for controlled distribution,
therefore reducing waste
• The next napkin is pulled into
position as each napkin is dispensed
• Hygienic, you only touch
the napkin you use
• Allows up to 600 napkins
• Modern Smoke/Black
dispenser fits with any décor
Model
No.
JC015
Mfg.
No.
4133
UNIVERSAL ROLL TOWELS
JC013
Mfg.
Ply
Open Size
No. Colour Ply
Type
L" x W"
2733 Mocha 1 Full Emboss 13 x 12
2629 White 1 Full Emboss 13 x 12
Price
/Each
7.95
20.05
20.64
20.64
20.64
20.64
42.11
27.95
33.71
39.35
Description
Plastic plate 6", 125/pkg
Plastic plate 9", 125/pkg
Plastic forks, 1000/box
Plastic knives, 1000/box
Plastic spoons, 1000/box
Plastic teaspoons, 100/box
Cutlery Sets (incl. knife, fork, salt, pepper, napkin) 500/Case
Foam Plate 9", 500/Case
Paper Plate 9", 1200/Case
Sugar Packets, 3000/Case
• Double-ply sheets offer
strength and absorbency
• Made from 100% recycled fibres
• Contains up to 60%
post-consumer material
• North River® products are certified
Processed Chlorine-Free®
and EcoLogoM
SERV-RITE II NORTH RIVER®
Model
No.
JC013
JC014
Model
No.
OD039
OD040
OE063
OE064
OE065
OD045
OK076
OK078
OK079
OK080
OE065
CASCADES®
INDIVIDUAL TOWELS
• Practical Dispenser Box
• 18" x 328' roll
Model No. OD050
Price/Each $32.65
• Serv-Rite II dispenser napkins are a favourite
with fast-food establishments
• As each napkin is dispensed
the next one is pulled in to place
• No cross-contamination – you
only touch the napkin you use
• 100% recycled paper
• A strong, absorbent high quality napkin
• Certified Processed Chlorine Free® and
Eco-LogoM and Green Seal certified®
• Endorsed by the Green
Restaurant Association
OE064
OE063
OD039
Dimensions
L" x W" x H"
10.5 x 14.5 x 16
JANITORIAL &
MAINTENANCE
Paper
Options
JC027, JC028,
JC029, JC030, JC031
MATERIAL
HANDLING &
STORAGE
Price
/Each
83.03
1621
12-07-26 2:36 PM
WATER COOLERS
OASIS® WATER COOLERS
Oasis® water coolers are manufactured with a heavy gauge steel frame which provides durable and quiet operation.
They feature a 5-year limited warranty on the sealed refrigeration system and most component parts. All waterways
are constructed of lead free materials and HFC 134A is used as a refrigerant. No CFCs are used. All units are standard tan
sandstone finish. Drinking water temperature is 50˚F/10˚C. Certified for sale in Canada by an accredited certification body.
WALLMOUNTED COOLERS
These units come in standard or compact models. All units are shipped with complete instructions
and wall mounting brackets. Units should be installed with the nozzle 36 inches from the floor.
Model
No.
OJ952
OA061
OA536
Mfg.
No.
PLF4CM
P8M
P14M
Description
Compact
Standard
Standard
GPH
Capacity
4
8
14
W"
17
17
17
x
x
x
x
Dimensions
D"
x
13 3/16 x
29 7/8 x
29 7/8 x
H"
16
14
14
Wt.
lbs.
51
73
76
OA061
Price
/Each
943.28
1099.53
1454.47
FREESTANDING COOLERS
COMPACT FREE-STANDING
Attractive economical line suitable for applications in offices, shops or factories where space saving is critical.
Model
No.
OA063
OA064
OA548
Mfg.
No.
P3CP
P5CP
P10CP
Description
Compact
Compact
Compact
GPH
Capacity
3
5
10
W"
12
12
12
x
x
x
x
Dimensions
D"
x
12
x
12
x
12
x
H"
43 3/4
43 3/4
43 3/4
Wt.
lbs.
66
69
73
Price
/Each
868.05
916.28
935.57
AGAINSTAWALL OR FREESTANDING COOLERS
OA063
All plumbing connections are completely sealed within the cabinet, permitting flush-to-wall installation.
Model
No.
OC709
OA550
Mfg.
No.
P8FA
P14FA
Description
Standard
Standard
GPH
Capacity
8
14
W"
17
17
x
x
x
Dimensions
D"
x
14
x
14
x
H"
43 3/4
43 3/4
Wt.
lbs.
94
96
Price
/Each
1109.18
1451.57
OC709
BARRIER FREE WHEELCHAIR COOLERS
• Designed specifically for easy access
• Wheelchairs fit under edge of water basin
for comfort and convenience
• Instructions and wall mounting brackets included
• Drinking water temperature is 50°F/10°C
• 17 1/2 W" x 18 1/2 D" x 22 11/32 H"
Model
No.
OA059
Mfg.
No.
P8AC
OA059
Bubbler Valve
Type
3 Electric Push Bars
GPH
Cap.
7.8
Price
/Each
819.83
DRINKING WATER FILTERS FOR OASIS® COOLERS
•
•
•
•
•
•
Removes dirt, cloudiness, particles, unpleasant odours and taste
Reduces chlorine by 97 %, lead between 95.9 % and 99 % and cryptosporidium and giardia cysts by 99.99 %
Works with all the Oasis® water coolers listed on this page
Includes brackets, complete filter and colour coded waterline connections
Fast and easy-to-change refill cartridges with automatic shut-off valve inside the filter
Designed to last 1500 gallons or approximately six months
Model
No.
OG445
OG446
OG445
Price
/Each
214.00
149.00
Description
Filter
Refill Cartridge
R32768E
1622
MATERIAL
HANDLING &
STORAGE
1620-1625_Eng.indd 1622
JANITORIAL &
MAINTENANCE
SAFETY
EQUIPMENT &
SUPPLIES
WELDING &
METALWORKING
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
INSTRUMENTS,
SCALES &
ELECTRICAL
OFFICE
PRODUCTS
12-07-26 2:36 PM
WATER COOLERS
VERSAFILLERTM WATER FOUNTAIN & BOTTLE FILLERS
Enjoy the best of both water options; refreshing fountain water and a bottle filler unit for refillable bottles.
The VersaFillerTM accomplishes both tasks with ease and simplicity, and puts your location at the top of the
refillable bottle trend while making a bold statement about your concern for the environment.
The VersaFillerTM is also designed for the future. The alcove and activation button contain FreshieldTM ,
which utilizes a silver-based antimicrobial compound. This is ideal for work-place settings, schools,
university locations, and any public building.
The VersaFillerTM unit is available in two configurations. The ON557 (PWSBF) model can be retrofitted
to existing OA059 (P8AC) coolers as well as Elkay's EZ8 models (some installation is required to connect
this unit to existing P8AC models) providing an instant upgrade to those products already in the field.
The ON557 (PWSBF) is also designed for simplicity of installation, requiring only water tubing
connection to the host (P8), with no required electrical connections or separate drains.
The VersaFillerTM can be purchased as a complete top and bottom combination as well, ON555 or ON556.
ON556
STANDARD FEATURES:
•
•
•
•
•
•
•
Waterways are lead-free in materials and construction
Heavy-duty galvanized steel frame bolts directly to the wall
FreshieldTM antimicrobial compound
Gauges: Panels: 22, frame: 16
ADA compliant for adult or child when properly installed
Certified to NSF/ANSI Standard 61, Annex G (AB1953)
5-year limited warranty
Model
No.
ON555
ON556
ON557
Mfg.
No.
P8SBF
P8SBF
N/A
Description
VersaFillerTM Combo Complete w/OA059, Sandstone Finish
VersaFillerTM Combo Complete w/OA059, Stainless Finish
VersaFillerTM Retrofit Kit for OA059, Fountain Only (See page 1622 for OA059)
Capacity
GPH
8
8
N/A
W"
24
24
6
x
x
x
x
Dimensions
D"
x
36
x
36
x
18
x
H"
24
24
12
Weight
lbs.
74
74
10
Price
/Each
1563.23
1683.88
615.40
BRITA® HYDRATION STATIONTM
The Brita® Hydration StationTM offers a convenient, touch-free alternative to bottled water, filling up reusable containers with healthier*,
refreshing water. The unit conveniently mounts on to most wall surfaces and dispenses great-tasting, filtered water from standard tap lines.
Simple to use – Place a bottle beneath the nozzle and the Brita® Hydration StationTM does the rest. Simply move your bottle in and up to fill,
and down and out to turn off. The Brita® Hydration StationTM turns itself off for a drip-free, spill-free experience. Touch-free, sensor-operated
design allows the unit to be activated without physical contact by the user, assuring hygienic operation.
* Certified to reduce lead and cysts. Substances reduced may not be in all users' water.
FEATURES:
R32769E
• Beautiful Satin Finish - aesthetically pleasing and modern
design consisting of a 16-gauge type 304 brushed stainless
steel back panel with a #4 satin finish and ABS front panel
• Touch-Free, Sensor Operation - simply place a bottle beneath the
nozzle to dispense water; touch-free use assures hygienic operation
• Filter Replacement Indicator Light - the unit's front face features a
filter reminder light; green is good, yellow indicates filter needs
replacement soon, red indicates filter replacement is due
• Simple to Maintain - servicing the unit is simple with replacement
filters utilizing a simple twist-on, twist-off replacement
• 30-Second Timeout - 30-second timeout feature
prevents unauthorized use and malicious activation
• Lead-Free - the Brita® Hydration StationTM features
certified lead-free materials, components,
and construction meeting AB 1953 and NSF/ANSI 61
• Certifications - NSF/ANSI 61, NSF/ANSI 42, 53, AB1953, and CSA B483.1.
Certified under IAPMO under the Drinking Fountain category
• Advanced Filtration System - the unit is certified to NSF/ANSI 42 and
the only NSF/ANSI 53 drinking water system on the market, reducing
lead, chlorine (taste/odor), and removes 99.99% of cysts
• 24-Hour Purge - self-activated 24-hour purge guarantees
fresh water supply by regularly flushing out water line
• Chilled Water Option - add the optional chiller
to help reduce the water temperature
Model
No.
ON548
ON549
ON550
ON551
ON552
ON553
OFFICE
PRODUCTS
1620-1625_Eng.indd 1623
Mfg.
No.
2000
HCR8
MTGFR.HSC
2000SM
6470
6424
INSTRUMENTS,
SCALES &
ELECTRICAL
ON548
Description
Brita® Hydration StationTM Semi-Recessed
Remote Chiller for Model ON548
Mouting Frame for Chiller ON549
Brita® Hydration StationTM Surface Mount
Drain Kit for ON551 Hard Plum Unit to Waste Line
Replacement Brita® Filter for ON548, ON551
SHIPPING &
PACKAGING
TOOLS &
EQUIPMENT
WELDING &
METALWORKING
ON551
W"
15
Dimensions
x D"
x
x 3.94 x
H"
30.25
Weight
lbs.
33
15
x
30.25
37
6.94
SAFETY
EQUIPMENT &
SUPPLIES
x
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
Price
/ Each
2597.84
1141.84
380.61
2477.01
120.83
96.66
1623
12-07-26 2:36 PM
WATER COOLERS
REPLACEMENT FILTER CARTRIDGES
Single Action (Dirt/Rust) - hot and cold water filters
are made of pure white cellulose fibres. 1" centre hole.
Double Action (Taste/Odour, Dirt/Rust) - cold water only filter
made of pure white cellulose fibres with activated carbon granules.
For normal contamination. 1" centre hole.
Double Action (Scale, Dirt/Rust) - uses annular grooves
and the graded density cellulose of the Dirt/Rust cartridges
plus a compound to inhibit scale. Extends the life of pipes,
fixtures and appliances. Cold water only. 1" centre hole.
Model
No.
BA590
BA591
BA592
BA593
Filter
Type
Single (Dirt/Rust)
Single (Dirt/Rust)
Double (Taste/Odour, Dirt/Rust)
Double (Scale, Dirt/Rust)
Maximum
Temperature
210°F (99°C)
210°F (99°C)
100°F (38°C)
100°F (38°C)
Flow/Rate/
Cartridge (GPM)
6
6
3
8
BA590
BA591
BA592
BA593
Dimensions
H"
x
Dia"
9 3/4
x
2 5/8
9 3/4
x
2 5/8
9 3/4
x
3
9 3/4
x
2 15/16
Degree
of Filtration
Normal
Heavy
Normal
Normal
Rating
Microns
5
50
5
5
Price
/Each
9.92
8.38
17.38
67.28
ICE MAKER WATER FILTERS
• Triple action filtration provides sparkling clear ice
cubes, fresh tasting water, coffee and beverages
• Protects equipment from scale and corrosion,
reducing maintenance costs
• Effective taste, odor, chlorine removal
• Filters particulates as small as 5 microns
• 1/4" NPT connections, 1/2 GPM flow rate maximum
Model
No.
BA609
H"
8 3/8
BA609
Dimensions
x
Dia."
x
2 1/4
Max. Water
Capacity
1500 gal.
Max. Water
Temperature
100°F (38°C)
Pressure
125 PSI
Price
/Each
40.76
INDUSTRIAL WATER COOLERS
UNDER-SINK WATER FILTERS
•
•
•
•
•
•
•
•
•
•
•
Heavy-duty blow molded resin resists chips and dents in the toughest work area or job site
Injection grade insulated liner material keeps your water or beverage cold
Leak-resistant screw on lid
Drip-resistant spigot
Sturdy molded-in handles on the 10-gallon cooler
Universal cup dispenser is available for
3-gallons and up, holds 200 cups
Cups not included
Compact 2 GPM cold water filter
Filter included
Maximum water temperature 100°F (38°C)
125 PSI
Inlet/outlet size: 3/8" NPT
BA605
NI653
NI655
1624
Description
3 Gallons
5 Gallons
5 Gallons w/Dispenser
10 Gallons
Universal Cup Dispenser
MATERIAL
HANDLING &
STORAGE
1620-1625_Eng.indd 1624
JANITORIAL &
MAINTENANCE
Wt. lbs.
5.4
7.5
7.5
10.9
0.82
SAFETY
EQUIPMENT &
SUPPLIES
Price/Each
56.98
55.94
67.97
110.78
25.61
Model
No.
BA607
BA608
WELDING &
METALWORKING
Description
Taste/Odour, Dirt/Rust
Taste/Odour, Dirt/Rust
Filter
Type
Filter #
Wt.
lbs.
Price
/Each
Taste/Odour
Taste/Odour, Scale
BA607
BA608
2 3/4
4
164.73
227.26
For Use
with Housing
BA605
BA606
Price
/Each
30.38
81.47
R32770E
Model No.
NI653
NI654
NI655
NI656
NI657
Model
Dimensions
No.
H"
x
Dia."
DIRT/RUST
BA605
8 13/16 x
4 7/8
BA606
11 1/16 x
3 3/8
REPLACEMENT FILTER CARTRIDGES
TOOLS &
EQUIPMENT
SHIPPING &
PACKAGING
INSTRUMENTS,
SCALES &
ELECTRICAL
OFFICE
PRODUCTS
12-07-26 2:37 PM
HVAC
COOL MIST
HUMIDIFIER CONSOLE
6" CLIP-ON
& DESK FANS
•
•
•
•
•
• 2 speed, low and high settings
• Tilting head
• Fully assembled and ready for use
• Convertible clip and desk feature
• Weight: 2.21 lbs.
Model No. EA525
Price/Each $23.50
Humidifies up to 1700 sq.ft.
8-gal. output, 6-gal. capacity
Adjustable humidistat
Runs up to 48 hours
2 portable tanks and wheels
for easy mobility
Model No. BB302
Price/Each $116.29
Convertible
Clip Included
REPLACEMENT WICK FILTER
Model No. BB312
Price/Each $13.39
OSCILLATING DESK FANS
WITH PUSH BUTTONS
• 3-speed push buttons controls
• Rotating or fixed air direction
• Portable and easy to assemble
• Topple resistant base
• Weight: 6.83 lbs.
Model No. EA305 12" diameter
Price/Each $47.63
Model No. EA306 16" diameter
Price/Each $52.25
DEHUMIDIFIER
• Flat panel design
• Top discharge side continuous
drain hose connection
• Electronic controls with LED display
• Automatic defrost
• Low temperature operating to 39°F
• Water level indicator with LED
and sound when tank is full
• Clean filter reminder with LED indicator
• Portable unit on casters allows
for easy movement of the unit
Model
No.
EA481
EA482
EA483
EA484
Capacity
Pints
30
40
50
70
Coverage
sq.ft.
2000
2500
3000
4000
W"
13 1/4
13 1/4
15 3/8
15 3/8
18" OSCILLATING
PEDESTAL FANS
Dimensions
x
D"
x
x 9 5/8 x
x 9 5/8 x
x 10 1/2 x
x 10 1/2 x
Wt.
lbs.
32
33
37.5
44
H"
19 1/2
19 1/2
23 5/8
23 5/8
Price
/Each
289.99
299.99
319.99
389.99
• 3-speed push button front control
• Adjustable height
• Rotating or fixed air direction
• Easy to assemble
• Weight: 19.84 lbs.
Model No. EA307
Price/Each $91.79
ENVIROKLEANTM AIR PURIFIER
•
•
•
•
•
•
Reduces smoke, dust, pollen and other particles
Independent ioniser to assist with particle removal
Quiet 3-speed fan with high quality motor
Washable pre-filter
Filter change indicator
Electronic filter change
monitor on model EA124
• Filters included
MOBILE 3 IN 1 AIR CONDITIONER
•
•
•
•
•
•
EA124
EA122
Model
No.
Description
EA122
Tabletop
EA124
Tower
REPLACEMENT FILTERS
Model No.
EA127
3-speed fan
Can be used as and air conditioner, a dehumidifier or a fan
Programmable thermostat
24-hour programmable timer
Sleep and auto mode
Independent dehumidifying system
shut down when tank is full
Model No. EA402 10 000 BTU
Price/Each $569.99
Room
Size sq.ft.
120
180
Type
EnvirokleanTM filter cartridge, 2/pkg.
-
Price
/Each
60.77
88.15
Price/Each
23.38
R34460E
1500 W CERAMIC HEATERS
WITH ADJUSTABLE
THERMOSTAT
• 1500 W/5200 BTU ceramic heater
• Adjustable thermostat
• Thermal safety features
• Cool touch cabinet
• Built-in filter to collect dust
• 120 V
Model No. EA467
Price/Each $59.95
RADIANT PLUG–IN
UNDER DESK HEATERS
Pays for itself in
energy savings!
• Safe comfortable radiant heat
• Extremely economical to
operate - only draws 1.4 A
• Will not effect computer work stations
• Includes Velcro tabs and
wire support hardware
for easy installation
• Lighted on-off
kick switch
• Built-in safety
tip-over switch
Model No.
BA960
Volts
120
Watts
170
Amps
1.4
Size"
15 x 22 x 1
Price/Each
211.34
• 3-speed push button front control
OFFICE
PRODUCTS
1620-1625_Eng.indd 1625
INSTRUMENTS,
SCALES &
ELECTRICAL
SHIPPING &
PACKAGING
TOOLS &
EQUIPMENT
WELDING &
METALWORKING
SAFETY
EQUIPMENT &
SUPPLIES
JANITORIAL &
MAINTENANCE
MATERIAL
HANDLING &
STORAGE
1625
12-07-26 2:37 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising