Qomo | Interactive Whiteboard | Owner`s manual | Qomo Interactive Whiteboard Owner`s manual

Qomo Interactive Whiteboard Owner`s manual
INTERACTIVE WHITEBOARD
Owner’s Manual
Table of Contents
What’s In The Box ............................................................................... 2
QOMO Whiteboard System Requirements........................................ 3
Introduction ......................................................................................... 4
Whiteboard Software Features........................................................... 5
How to Install Hardware...................................................................... 6
How to Install Software ..................................................................... 15
How to Use Whiteboard Annotation Software................................. 20
Troubleshooting Guide ..................................................................... 21
QOMO Interactive Whiteboard User Tips ........................................ 23
Specifications ..................................................................................... 24
Technical Support ............................................................................. 28
1
What’s In The Box
Thank you for your purchase of the QOMO Interactive Whiteboard. If any
items are missing or damaged, please contact your authorized reseller
immediately.
CONTENTS:
White Board * 1 pc
USB Cable 49 ft (7.5m) * 1 pc
Installation CD * 1 pc
Warranty Card * 1 pc
Pen Tray (Optional) * 1 pc
Writing Pen *3 pc
Erase * 1 pc
Floor Stand (Optional) *1 set
Castor (Optional) * 1 set
Wall-mounting Bracket (Optional) * 1 set
2
QOMO Whiteboard System Requirements
Lowest Environmental Requirements:
·
·
·
·
·
CPU: 300MHz×86
Memory: 128M
Display Card: Support 256 or above
Hard Disk: 100M
Screen Display Resolution: 800×600、1024×768 、
1280×1024
· USB1.1 port
Recommended:
·
·
·
·
·
CPU: 1GHz×86
Memory: 256M or above
Display Card: Support 256 or above
Hard Disk: 500M
Screen Display Resolution: 1024×768 、1280×1024
· USB port
Software Running Environment: Microsoft Windows 2000/XP/
32 bits vista
3
Introduction
QOMO’s Interactive Whiteboard uses infrared technology. Working
seamlessly with a projector and computer, the QOMO Interactive
Whiteboard provides more convenient, interactive and effective
presentations. Perfect for school auditoriums, conference rooms, trade
shows, symposiums and lecture halls. Users can write on the screen
using the included pens, wand or the user’s finger.
ƒ
Writing: Write, draw and perform mouse functions with your finger.
The Whiteboard displays your penmanship instantaneously.
ƒ
Annotating: The user can operate and annotate over any computer
applications, or save notes directly into Flow! Software, including
PowerPoint, Word, Excel, MEPG JPEG, AVI and etc.
ƒ
Interacting: In video conferencing, both parties can share data and
write in real time just like a standard conference room. Once
integrated with Polycom or other video conferencing systems, using
QOMO’s Interactive Whiteboard can improve video conference
results and efficiency. The system can support up to 40 writing
locations.
ƒ
Touch System: QOMO Interactive Whiteboard is sensitive to touch
speed and can be used as a high-resolution interactive white board.
ƒ
Touch Recognition: Can recognize touch of a single-finger, certain
gesture, right-click, left-click and double click.
ƒ
Hot Keys: Hot keys located on the side(s) of the boards providing
quick access to frequently used keys.
ƒ
Energy conservation: Controls energy consumption within 0.5W.
No need for additional power supply.
4
Whiteboard Software Features:
ƒ
Designed for teaching and conference systems.
ƒ
High gain and low glare screen.
ƒ
Saves images in Vector image format.
ƒ
storage space and makes file transferring easier and faster
ƒ
Users can customize pen type, line width, and color schemes to fit
ƒ
their individual preferences.
ƒ
Powerful screen functions supports real-time editing
ƒ
Graphic tools allow users to choose a background, input graphics and
Vector images take up less
images.
ƒ
ƒ
Paintbrush pen is speed sensitive
Writing file allows for easy conversion to many other formats such as:
PDF, JPG, GIF, PNG, TIFF, BMP, etc.
ƒ
Graphic tools and Hot Keys allow users to choose a pen to annotate,
or use as a mouse control. The 12 Hot Keys function as: Page Up
& Down, Insert White Background, Insert Black Background, Select
Pen Size, Eraser, Save and Cancel.
ƒ
Supports other application software.
Note: The projection area is outlined at the upper left and lower right corner of
the board using these icons(“
”). Please project onto this area for best
results.
5
How to Install Hardware
1. How to install QWB56/200/300/100WS hardware
Install Pen Tray: In the frame of the board, prior to securing the pen tray you
will find a slot that accommodates a Kensington lock. If you would like to use
a Kensington lock insert and loop the cable through the center hole on the
frame, position the pen tray in line with the four screws, and then screw the
pen tray in place. (Shown below)
6
Install Wall-mounting: Set desired height according to user’s preferences.
Using the wall-mounting brackets as a template, place the 8 stilettos on the
wall and screw bolts into each hole. Align the wall-mounting brackets onto the
bolts and tighten the bolts. Check that each location hole faces each
corresponding bolt and hang the white board to the wall. (As shown below)
7
8
Install White Board on a Floor Stand:
(1) Lock all four casters in the down position (as shown)
(2) With an assistant’s help, hang Interactive whiteboard on the floor stand by
lowering the two bolts onto the top hooks and securing the bottom bolts into
the bottom hooks. There are two heights for hanging according to user’s
preferences.(as shown below)
9
2. How to install QWB200 SLIM /300 SLIM Hardware
Install Securing Pen Tray:
White color frame with aluminum pen tray: Install aluminum pen tray at the
bottom of the interactive whiteboard (with the screws at the bottom of the
back of the interactive whiteboard) shown below:
10
Grey color frame with pen tray: In the frame of the board, prior to securing the
pen tray you will find a slot that accommodates a Kensington lock. If you
would like to use a Kensington lock insert and loop the cable through the
center hole on the frame, position the pen tray in line with the four screws,
and then screw the pen tray in place. (Shown below)
11
Install Wall-mounting:
(1) Install two wall-mounting brackets A at the back of the interactive
whiteboard (with the four screws at the top of the back of the interactive
whiteboard), shown below:
(2) Install two wall-mounting brackets C at the back of the whiteboard (with
the two screws at the bottom of the back of the whiteboard), shown below:
12
Set desired height according to user’s preference. Place the 4 stilettos on the
wall and screw bolts into each hole to fix the wall-mounting brackets B. Make
sure the distance between the two wall-mounting brackets B is fit for hanging
the interactive whiteboard. Shown below:
After hanging the whiteboard, place 2 stilettos on the wall according to the
actual position and screw bolts into each hole to fix the wall-mounting
brackets C. shown below:
13
Install White Board on a Floor Stand:
(1) Assemble the stand with screws, shown below:
(2) Lock all four casters in the down position (as shown)
(3)With an assistant’s help, hang Interactive whiteboard on the floor stand
by lowering the two bolts onto the top hooks and securing the bottom bolts into
the bottom hooks. There are five heights for hanging according to user’s
preferences.
14
How to Install Software
1. Install Software
Connect the Whiteboard to your computer or laptop using the provided USB
cable and insert the QOMO Interactive Whiteboard CD.
Once the USB
cable is connected the computer will notify that it has “found new hardware”
and the following window will appear:
Pease click “Cancel” and use the following method to install the application
software. Once the QOMO Interactive Whiteboard CD is placed in the
computer’s CD-ROM, the following window will appear:
15
Click Whiteboard Software to begin installation
Follow the prompts in the dialog box messages to complete the installation.
Double-click on the Microsoft DirectX9.0 to install Direct X9.0
Follow the prompts to install DirectX9.0. Once the installation of the DirectX
and Whiteboard Setup is complete, click ‘Yes” to restart your computer.
16
Once the software is installed an icon will appear in the computer’s windows
system tray.
indicates a connection has been made to the Whiteboard,
indicates no connection has been made, please check the hardware
connection and USB driver.
Note: Under Windows XP, the USB driver may need to be reinstalled if the
connection to another USB port. Please press “Next” to search USB driver
automatically.
Double-click on the
icon to populate the options
menu.
‘About’ Option
The dialog box displays application software copyright date, edition and
hardware information.
‘Setup’ Option
17
System setup is used to set the simulation of mouse’s right-click and
double-click based on user’s preferences.
To Simulate Right-click: The pen will function as a mouse right-click
when the pen tip stops on the screen more than 1500 milliseconds
(right-click time) and moves a distance less than 20 pixels (response
time).
To Simulate Double-click: The pen will function as a double-click on the
screen when two consecutive clicks occur in less than 200 milliseconds
(double-click time) and in position less than 20 pixels (response area)
from one another.
Calibrating Whiteboard
18
Users can calibrate image if the projected touch point is offset from actual
contact location. To calibrate, click ‘Calibrate’ on the options menu then click
‘Start’ Using the Interactive Whiteboard white dots will appear on the screen,
to orient the projected image on the board, follow the on screen instructions by
clicking
on the white dot each time it appears on the screen. The
orientation data saves in the Interactive Whiteboard software automatically
and remains unchanged until you the next time you calibrate.
Exit Driver Software
When the QOMO Interactive Whiteboard is no longer needed, click ”Exit” to
exit the program. The Whiteboard software can be reopened from the start
menu.
Note: There are three situations of Whiteboard connection errors
Shows the QWB56/200/300 White Board is not connected properly
Shows the QWB56/200/300 White Board is in the process of connecting
Shows the QWB56/200/300 White Board is connected properly
2. Hot Keys
There are twelve hot keys on the right and left hand sides of the board.
Note: Only available on 78-inch and 105-inch models, 56-inch and 88
inch model whiteboard only has hot keys on the left hand side. The
functions are listed below:
19
Writing pens and eraser
There are three colored writing pens and one eraser, red, black, and blue.
The writing pen can write with the same color or users can choose a different
color from the color palette in the software.
★
Writing with single-finger, moving with multi-finger.
How to Use Whiteboard Annotation Software
Please refer to the <Application Software Instruction> on the CD for details.
20
Troubleshooting Guide
Problem
Reason
Try the following
Install/reinstall the driver by run
The whiteboard driver is not
icon
appears
installed
in windows START menu
on the task bar at
the lower right of Connection Failure between the
screen
computer and the whiteboard
Restart computer and reinstall
Installation error
software
The stroke color is the same or
The writing content similar to the background
cannot be
Hands and/or some objects on
displayed on the
screen
screen
Retry the connection
White Board software does not
started
The blue indicator
Reset the stroke color
Remove all objects
Start the software
Reconnect USB cable or change
on whiteboard does USB error
cable
not light up
Install/reinstall the driver by run
The blue indicator
The whiteboard driver is not
on the whiteboard
installed
in windows START menu
does not light up or
is always flash
Retry connection using another
USB port error
USB port
USB cable failure
Change USB cable
21
Frequently Asked Questions
Why isn’t anything showing up on the screen?
1:The selected stroke color may be the same as or similar to the
background color. Please change the stroke color and try again. Otherwise, the
pen may not be working properly. Please contact your reseller immediately.
Do I have to run calibration after reinstalling the application software?
1:No. To keep it simple, the system records your last location adjustment
parameters.
Is the object covered by the page sorter window really covered?
1:The object is only covered by the page sorter window temporarily and it will
be shown after the page sorter window is closed.
Can I custom define a page background and color?
1:Yes, please refer to Setup Page Background.
How do I know if my QWB56/200/300 White Board is working properly?
1: If the red indicator is shining while writing on the screen, the
QWB56/200/300 White Board Pen works properly.
Why cannot the teaching page color be displayed?
1:The background color will be covered by the image if the background image
size is larger than the screen resolution size and the image is not transparent.
22
QOMO Interactive Whiteboard User Tips
When searching for a specific page among many pages enter the Page Index
mode and look up this page quickly on the Page Sorter window.
、
Press the Ctrl+ key combination (
accurately.
、
) to move/place objects
To improve the displaying speed, the size of the image in use should be no
larger than the size of the screen resolution.
If possible, convert the picture that will be inserted into WMF format first. This
operation can improve the displaying speed and reduce distortion when
magnifying or shrinking the image.
In order for the image to be displayed on the screen clearly, set the image
size to the same size as the screen being displayed. For example: If the
screen resolution is 1024×768, the image pixel should be set to1024×768.
23
Specifications
56" Interactive Whiteboard
QWB56
Technology
Infrared
Touch System
Pen, Wand or Finger
Touchable range
46" x 33" (1159mm x 831mm)
Resolution
1024 x 1024
Response Time
First dot:25ms,continuous dot:8ms
Cursor Speed
120 inches/second
Coordinate Accuracy
3mm
Consumer Current
Area Size (Diagonal)
Active
≤75mA
Port
USB
Dimensions
52" x 38" (1331mm x 971mm)
Packing Dimensions
55" x 43" x 8" (1400 x 1100 x 200mm)
Net Weight
31 lbs (14kg)
Gross Weight
48 lbs (22kg)
Software Drivers
Windows 2000/XP/32 bits vista
Accessories
Standard: 3 Interactive Pens (red, black,
blue), Eraser, Pen Tray
Optional: Floor Stand
Operating Temp
5°F to 122°F (-15°C to 50°C)
Operating Humidity
20~90%
Storage Temp
-40°F to 122°F (-40°C to 50°C)
Storage Humidity
10~95%
24
78" Interactive Whiteboard
QWB200
Technology
Infrared
Touch System
Pen, Wand or Finger
Touchable range
65" x 46" (1653mm x 1159mm)
Resolution
1024 x 1024
Response Time
First dot:25ms,continuous dot:8ms
Cursor Speed
120 inches/second
Coordinate Accuracy
3mm
Consumer Current
Area Size (Diagonal)
Active
≤80mA
Port
USB
Dimensions
72" x 51" (1824mm x 1301mm)
Packing Dimensions
80" x 60" x 8" (2040 x 1520 x 200mm)
Net Weight
57 lbs (26kg)
Gross Weight
75 lbs (34kg)
Software Drivers
Windows 2000/XP/32 bits vista
Accessories
Standard: 3 Interactive Pens (red, black,
blue), Eraser, Pen Tray
Optional: Floor Stand
Operating Temp
5°F to 122°F (-15°C to 50°C)
Operating Humidity
20~90%
Storage Temp
-40°F to 122°F (-40°C to 50°C)
Storage Humidity
10~95%
25
88" Interactive Whiteboard
QWB300
Technology
Infrared
Touch System
Pen, Wand or Finger
Touchable range
72" x 52" (1817mm x 1323mm)
Resolution
2048 x 2048
Response Time
First dot:25ms,continuous dot:8ms
Cursor Speed
120 inches/second
Coordinate Accuracy
3mm
Consumer Current
Area Size (Diagonal)
Active
≤85mA
Port
USB
Dimensions
78" x 58" (1988mm x 1465mm)
Packing Dimensions
80" x 66" x 8" (2204 x 1684 x 200mm)
Net Weight
66 lbs (30kg)
Gross Weight
88 lbs (40kg)
Software Drivers
Windows 2000/XP/32 bits vista
Accessories
Standard: 3 Interactive Pens (red, black,
blue), Eraser, Pen Tray
Optional: Floor Stand
Operating Temp
5°F to 122°F (-15°C to 50°C)
Operating Humidity
20~90%
Storage Temp
-40°F to 122°F (-40°C to 50°C)
Storage Humidity
10~95%
26
105" Interactive Whiteboard
QWB100WS
Technology
Infrared
Touch System
Pen, Wand or Finger
Touchable range
84" x 46" (2145mm x 1159mm)
Resolution
4096 x 4096
Response Time
First dot:25ms,continuous dot:8ms
Cursor Speed
120 inches/second
Coordinate Accuracy
3mm
Consumer Current
Area Size (Diagonal)
Active
≤100mA
Port
USB
Dimensions
91" x 51" (2317mm x 1301mm)
Packing Dimensions
99" x 59" x 7" (2522 x 1500 x 170mm)
Net Weight
66 lbs (30kg)
Gross Weight
88 lbs (40kg)
Software Drivers
Windows 2000/2003/XP
Accessories
Standard: 3 Interactive Pens (red, black,
blue), Eraser, Pen Tray
Optional: Floor Stand
Operating Temp
5°F to 122°F (-15°C to 50°C)
Operating Humidity
20~90%
Storage Temp
-40°F to 122°F (-40°C to 50°C)
Storage Humidity
10~95%
27
78" Interactive Whiteboard
QWB200 SLIM
Technology
Infrared
Touch System
Pen, Wand or Finger
Touchable range
65" x 46" (1653mm x 1159mm)
Resolution
4096 x 4096
Response Time
First dot:25ms,continuous dot:8ms
Cursor Speed
120 inches/second
Coordinate Accuracy
3mm
Consumer Current
Area Size (Diagonal)
Active
≤80mA
Port
USB
Dimensions
69" x 49" (1745mm x 1252mm)
Packing Dimensions
74" x 53" x 5" (1869 x 1357 x 120mm)
Net Weight
50 lbs (23kg)
Gross Weight
59 lbs (27kg)
Software Drivers
Windows 2000/XP/32 bits vista
White
Standard: 3 Interactive Pens (red,
black, blue), Eraser, Aluminum
Pen Tray
Optional: Floor Stand
Gray
Standard: 3 Interactive Pens (red,
black, blue), Eraser, Pen Tray
Optional: Floor Stand
Accessories
Operating Temp
5°F to 122°F (-15°C to 50°C)
Operating Humidity
20~90%
Storage Temp
-40°F to 122°F (-40°C to 50°C)
Storage Humidity
10~95%
28
88" Interactive Whiteboard
QWB300 SLIM
Technology
Infrared
Touch System
Pen, Wand or Finger
Touchable range
71" x 51" (1796mm x 1303mm)
Resolution
4096 x 4096
Response Time
First dot:25ms,continuous dot:8ms
Cursor Speed
120 inches/second
Coordinate Accuracy
3mm
Consumer Current
Area Size (Diagonal)
Active
≤85mA
Port
USB
Dimensions
75" x 56" (1909mm x 1414mm)
Packing Dimensions
80" x 60" x 5" (2033 x 1521 x 120mm)
Net Weight
57 lbs (26kg)
Gross Weight
68 lbs (31kg)
Software Drivers
Windows 2000/XP/32 bits vista
White
Standard: 3 Interactive Pens (red,
black, blue), Eraser, Aluminum
Pen Tray
Optional: Floor Stand
Gray
Standard: 3 Interactive Pens (red,
black, blue), Eraser, Pen Tray
Optional: Floor Stand
Accessories
Operating Temp
5°F to 122°F (-15°C to 50°C)
Operating Humidity
20~90%
Storage Temp
-40°F to 122°F (-40°C to 50°C)
Storage Humidity
10~95%
29
Technical Support
How to Reach QOMO:
By Phone
Call us at 1-866-990-QOMO. Our expert support staff is available
to provide technical assistance from 9:00AM through 5:00PM
Eastern Standard Time, Monday through Friday. Please gather the
following information before calling:
- Product model name(s) and numbers
- Product serial number(s)
- Date of purchase
- Detailed and specific questions
Online
Technical support is also available online at QOMO’s web site at
www.qomo.com. You can enter your questions and concerns
through our online form. Or you can email us at
support@qomo.com.
30
Copyrights © 2004 QOMO Hitevision, LLC. All Rights Reserved.
31
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising