TR-220 Multi-Function Test Set Datasheet Description Description The TR-220 provides test capability for Traffic and Collision Avoidance Systems (TCAS), Distance Measuring Equipment (DME), and Transponders (Modes A, C, and S). The TR-220 features state-of-the art design technology. Microprocessor control results in easy-to-use operation that requires minimum amounts of training. Setup menu allows storage of various test parameters to facilitate quick recall of test conditions. • • • • • • • • Tests TCAS, DME, and Transponder Transmits and receives ADS-B (1090 MHz squitter) Transmits Traffic Information System (TIS) intruder flight data Performs test requirements per FAR Part 43 Appendix F Meets European test requirements for Mode S Elementary and Enhanced Surveillance Compliant with European CE requirements 2 year limited warranty; Extended warranty available P/N 90 000 088 Transponder Features • Test Set automatically determines capability of transponder being tested (ATCRBS or Mode S) and selects appropriate tests • Testing can be done over-the-air, using directional antenna, or directly connected to transponder • Test Set can be configured for automatic sequencing or manual control of individual transponder tests TCAS • • • • Test set allows storage of 10 intruder scenarios, to simplify TCAS testing Allows simulation of ATCRBS or Mode S intruder User selection of velocity, starting distance, starting altitude, and vertical speed Measures UUT power and frequency DME • • • • Allows testing on all channels (108.00 to 117.95 MHz) Measures DME power, frequency, and PRF Transmits DME Morse-Code I.D. User selection of DME distance and velocity Specifications Subject to Change 11/4/04 Copyright © Tel-Instruments Electronics Corp. TR-220 Transponder Test Specifications * The TR-220 performs the following tests based on the capabilities of the transponder: Mode A - 4096 code, IDENT, percent reply, pulse spacing, pulse width Mode S Enhanced Surveillance parameters, including Selected Mode C - Altitude (feet and grey code), percent reply, pulse spacing, Altitude (BDS4); Roll Angle, True Track Angle, Ground Speed, Track pulse width Angle Rate, and True Airspeed (BDS5); Magnetic Heading, Indicated Side-lobe suppression (SLS) Airspeed, Mach #, Barometric Altitude Rate, and Inertial Vertical Mode A/S and C/S All Call - Mode S address, percent reply Velocity (BDS6) Mode A Only and Mode C Only Receives and decodes 1090 MHz ADS-B data, including squitter type Mode S Surveillance I.D. (DF5) – Mode S address, percent reply, flight (airborne position, surface position, aircraft identification/category, and status (Air, Ground, Alert, SPI), Mode S/Mode A 4096 code compare airborne velocity), latitude/longitude, N/S velocity, E/W velocity, Flight (automatic mode) I.D., Mode S address, altitude (GNSS or barometric), and airspeed Mode S Surveillance Altitude (DF4) – Mode S altitude, percent reply, Transmits 1090 MHz ADS-B data for four intruder aircraft (airborne or Mode S/Mode C altitude compare (automatic mode) surface position) Mode S Surveillance Short (DF0) – Mode S address, vertical status Transmits TIS data for four intruder aircraft (Air, ground), percent reply, decoded country code, decoded tail Transmitter Frequency 1030 MHz + 100 KHz number (if applicable) Power > 4 dBm Mode S Comm. I.D. (UF5/DF21) – Mode S ID code, percent reply Modes A, C, S Mode S Comm. Altitude (UF4DF20) – Mode S altitude, percent reply Undesired replies (UF11) – Checks for reply to incorrect Mode S Receiver Frequency Range 1086.5 to 1093.5 MHz interrogation Accuracy + 200 KHz Acquisition squitter – Pass/Fail indication of squitter duration, decoded Power Range 47 to 64 dBm Mode S address, interrogator code Accuracy + 2 dB (direct connect) Extended squitter – Pass/Fail indication of squitter duration, decoded + 3 dB (radiated) Mode S address Sensitivity Range -50 to -87 dBm Max Airspeed – Decodes and displays maximum airspeed Accuracy + 2 dB (direct connect) Diversity – Displays Pass/Fail indication and measured value of RF + 3 dB (radiated) leakage through Mode S transponder antenna ports Reply Percent Range 0 to 100% Sensitivity (MTL) – Measures and displays MTL for Modes A, C, and S Accuracy + 1% Measures and displays transponder power (dBm or watts), frequency, and receiver sensitivity (dBm) Decodes and displays Flight I.D. Decodes and displays Mode S address in Octal and Hex TCAS Test Specifications * The TR-220 allows testing of TCAS I, TCAS II, and Traffic Advisory Systems by simulating either ATCRBS or Mode S intruders. The Setup menu allows operator to configure and store 10 TCAS scenarios, including Distance (1 to 50 NMI), Altitude (-1000 to +99,900 ft.), Vertical Speed (-7,500 to +7,500 fpm) and Velocity (100 to 1200 KTS.). The TR-220 provides a relative measurement of TCAS power and frequency. Transmitter Frequency Power Modes 1090 MHz + 100 KHz > 4 dBm C, S Receiver Frequency Power 1026.5 to 1033.5 MHz 47 to 64 dBm Transmitter Frequency Power 962 to 1213 MHz + 100 KHz > 4 dBm Receiver Freq. Range Freq. Accuracy Sensitivity Range Channel Freq. + 3.5 MHz + 200 KHz < -35 dBm DME Test Specifications * The TR-220 provides test capability for DME by allowing operator to select test parameters, including Channel (108.00 to 117.95 MHz) and Velocity (120 to 1200 KTS.). The TR-220 measures and displays DME PRF (scan rate), power, and frequency. Also, the TR-220 transmits a Morse Code I.D. Accessories Directional antenna (hand-held or mounted on side of case) AC Power Cord Direct Connect Cable Directional Antenna Cable Operators Manual TAP-200 Anti-Radiation Coupler (Optional) Physical Packaging - MIL-PRF-28800, Style C Size: 14.5x9.4x6.5 in. (36.8x23.9x16.5 cm.) Weight: 20 lbs. (9.1 kg.) Operating Temperature: -28 to +55 C Battery Operation; 8 hours at 20% Duty Cycle AC Operation/Charging: 100-240 VAC, 50-400 Hz * Standard condition values 728 Garden St., Carlstadt, NJ USA Tel. +1 (201) 933-1600 Fax +1 (201) 933-7340 www.telinstrument.com Specifications Subject to Change 11/4/04 Copyright © Tel-Instruments Electronics Corp.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement