EInstruction | Mobi View | System information | eInstruction Mobi View System information

eInstruction Mobi View System information
G E T T I N G STARTED
Interwrite Mobi™
Interwrite Mobi Learner™
for Windows and the Mac
We at eInstructionTM are proud of our family of Interwrite
products. We strive to continue to bring you the best the
technology has to offer. We urge you to visit our Web site,
where we will post the latest information regarding any
updates and changes we have made that would impact the
instructions in this Getting Started document.
www.eInstruction.com
Click on any of the Interwrite products to access product
information, software downloads, documentation, and training information.
Please recycle
Table of Contents
Interwrite Mobi 1
About This Guide
1
Product Overview
1
Know What I Know (KWIK) Screen
1
Interwrite Mobi Learner
1
Radio Frequency Technology
2
Workspace Pen
2
Workspace Software
2
Installation Overview
3
Setting Up Your Interwrite Mobi 4
Setting Up Your Interwrite Mobi Learner
5
Charging the Interwrite Mobi and Pen
6
The Electronic Interactive Pen
7
Installing the Software on Windows 8
Installing the Software on the Mac 9
Installing the USB Workspace RF Hub
10
Connect the Interwrite Mobi
11
Viewing Device Manager
11
Using the Device Manager Main Window
12
Table of Contents
Operating the Mobi
13
Replacing the Interwrite Mobi Battery Pack
14
Operating the Buttons
15
Mobi Status Indicators
15
Mobi Learner Status Indicators
16
Working with the Mobi KWIK Screen
17
Selecting KWIK Screen Reports
18
Accessing SRS Reports With the Mobi
18
Getting Started with Interwrite Workspace 19
The Interwrite Workspace Toolbars
21
Presentation Files
23
Distributing Presentation Files
24
Additional eInstruction Resources
24
Battery Handling and Precautions
25
Warranty
27
Getting Started
Interwrite Mobi™
1
Interwrite Mobi™
About This Guide
This Getting Started guide describes how to set up your Interwrite Mobi and
Interactive Pen, install the Interwrite Workspace software, and establish a
communication connection with the PC or the Mac. It ends with an overview of the Interwrite Workspace software.
Product Overview
The Interwrite Mobi is a tablet system featuring the patented digitizer and
pen-input technology. Used with the Interwrite Workspace software on a PC
or a Mac, Mobis allow you control the computer by running applications,
opening and editing files, and annotating screen images and presentation
files from anywhere in the room. When used with an Interwrite DualBoard,
Mobis provide the ultimate multi-input collaborative system for the interactive class room or the interactive meeting room.
Know What I Know (KWIK) Screen
The KWIK Screen allows for Student
Response System information to display
and be used by the instructor for evaluation purposes. It is a color backlit LCD
display that interacts with the computer
to display the assessment data. The type
of data is dependent on the Student Response System being used. If one is not
installed, the LCD screen will be blank
but show the Mobi Status.
Interwrite Mobi Learner
The Interwrite Mobi Learner screen
identifies the unit and displays various
status indicators. It informs the user of
battery life, if the pen is in prox, if the
Learner is in Mouse Mode, and when
the unit is charging.
2
Interwrite Mobi™
Getting Started
Radio Frequency Technology
The Interwrite Mobi system uses Radio Frequency (RF) wireless technology to establish communication between the Tablet and the computer. The
Mobis come with the RF module built into the Tablet, so the only installation required is the Workspace RF USB Adapter on the computer.
Interwrite Pen
The electronic Interwrite Pen,
when positioned just above (in prox
of) or touching the surface of a poweredon, connected Tablet, controls the movements of the mouse on the computer. The Pen
becomes a writing and drawing instrument when
one of the many Workspace Annotation Tools is
selected from the projected Toolbar. When in Annotation
Mode, a user can make notes on a PowerPoint Slide Show,
highlight areas of interest on a spreadsheet, or edit a document
using a wide range of pen attributes.
Workspace Software
The operation of your Mobi is facilitated by the Interwrite Workspace software. The software is installed as part of the process of establishing communication between the Mobi and the computer and is covered in this guide.
The Workspace software has two operational modes: Lesson Mode and
Office Mode (Windows only).
An Interwrite Mobi, acting as an input device to the computer, remotely
controls the computer from anywhere in the room. When the Interwrite
DualBoard and a video projector are added, the computer’s desktop image
projects onto the Interwrite DualBoard’s surface, and the board, communicates as an input device to the computer.
In this environment, both the person at the Interwrite DualBoard and users
with Tablets seated around the room can interact with the presentation.
Getting Started
Interwrite Mobi™
Installation Overview
This section describes what you will be
doing and the order in which you will
be doing it, to facilitate the setup
of your Interwrite Mobi and its
preparation for use.
1. Unpack Your
Interwrite Mobi
The package includes the
Interwrite Mobi and the rechargeable Interwrite Interactive
Pen, a Pen tether, a Mini USB
cord, and an eInstructionTM CD
and a Workspace RF USB Adapter.
2. Charge Your Interwrite Mobi and Interactive
Pen
Your Tablet and Pen must be charged before you can use them. First, place
the Interactive Pen in the Tablet’s Pen Slot. Next, plug the Mini USB cord
into the Mini USB Port located at the top of the Tablet and the other end
into a USB Jack at the computer.
3. Install the Interwrite Workspace Software
Install the Interwrite Workspace Software using the CD provided to you
in your Interwrite Mobi kit. The CD will launch automatically. Follow the
prompts to complete the installation.
4. Connect Your Interwrite Mobi
Your Interwrite Mobi must be able to communicate with the Interwrite
Workspace software on your computer. This communication link is established wirelessly between radio frequency communication modules—one
built into the Tablet and the other connected to the computer.
3
4
Interwrite Mobi™
Getting Started
Setting Up Your Interwrite Mobi
The Interwrite Mobi communicates with the computer using radio frequency
technology. The RF communications module is built into the Interwrite Mobi.
The Tablet communicates through its built-in RF module with another RF
module installed on the computer. The Interwrite Mobi runs on Li-ion batteries, which provide about 10 hours of wireless operation before they have to
be recharged.
KWIK Screen
Navigation
Buttons
Power Button
Softkeys
Active Area
Mobi Pen
Pen/ Pen Storage
Mobi Dock Charging Contacts
(Optional Accessory)
Mini USB port
Getting Started
Interwrite Mobi™
Setting Up the Interwrite Mobi Learner
The Interwrite Mobi Learner communicates with the computer using radio
frequency technology. The RF communications module is built into the Interwrite Mobi. The Tablet communicates through its built-in RF module with
another RF module installed on the computer. The Interwrite Mobi runs on
Li-ion batteries, which provide about 10 hours of wireless operation before
they have to be recharged.
Status Screen
Navigation
Buttons
Power Button
Softkeys
Active Area
Learner Pen
Top of Mobi Learner
Pen/ Pen Storage
Mobi Dock Charging Contacts Mini USB port for Charging
(Optional Accessory)
5
6
Interwrite Mobi™
Getting Started
The first thing you should do when you unpack your new Interwrite Mobi and Interactive Pen is charge them.
Charging the Interwrite Mobi and Pen
Before you use your Interwrite Mobi and Interactive Pen for the first time,
they should be charged for about 12 hours. Whenever the Tablet battery is
low and needs to be recharged, the Tablet Battery Status Icon will display as
an empty battery.
1 Place the Interactive Pen in the Pen Slot.
2 Connect the Mini USB Cable to the Mini USB Port at the top of the Tablet.
3 Plug the Cable into a USB port on your computer.
The Interwrite Mobi can be used while it is charging.
4 When the Tablet and Pen are charged and the Battery Status displays that
it is charged, unplug the Charger from the Interwrite Mobi.
5 Press the Power Button when the Interwrite Mobi is charged.
The buttons and status indicators are described in more detail in the Operating the Interwrite Mobi section.
The Pen can be charged only when it is placed in the Pen Slot in the
Tablet, and only when the Tablet is being charged. A Pen charge lasts
over 40 hours. You should always charge the Pen when the Tablet is
being charged.
Getting Started
Interwrite Mobi™
7
The Electronic Interactive Pen
The Interactive Pen is an input device to the computer. You will use it to
write and draw in Lesson Mode and to control mouse movements in Mouse
Mode by moving the tip of the Pen just above (in prox of) or touching the
Tablet’s workspace surface. When the Pen Tip is in prox or touching the
Tablet’s workspace, it simulates the same effects you would get using the left
mouse button both in Windows and on the Mac.
Using the Pen
When the Pen is in prox, press the bottom end of the Rocker Button to
simulate a left mouse button double-click in Windows and on the Mac. Press
the top end of the Rocker Button to simulate a right mouse button click in
Windows and a Ctrl-click on the Mac. In Windows, hold down the bottom
Rocker Button and touch the Pen Tip to the Tablet’s workspace to erase. On
the Mac, with the Pen Tip touching the Tablet’s surface, hold down the bottom Rocker Button to erase.
Sleep Mode
The Pen goes into Sleep Mode after about two minutes of inactivity to
conserve power. Touching the Pen to a surface, or clicking one of its Rocker
Buttons, wakes up the Pen.
Pen Tip – Up or Down
Same as using Mouse
Rocker
Button
Bottom Side – Double-Click Left Mouse Button
Top Side – Right Mouse Button
8
Interwrite Mobi™
Getting Started
Installing the Software on Windows
The Interwrite Workspace software must be installed on Windows by
a user with Administrator privileges. Interwrite Workspace is compatible with Windows 2000, XP, and Vista.
1 Log in as Administrator.
2 Insert the Interwrite Workspace CD into the CD drive on your PC.
The Installer will autoload. If it doesn’t, click on the Start button
on the Windows Task Bar and select Run from the menu.
Type X:\setup.exe (X represents the CD drive letter).
3 Select the Install Interwrite Workspace Software menu option.
4 Follow the onscreen instructions for the software installation.
You will know Interwrite Workspace has
installed successfully by the appearance
of the eInstruction icon
in the System
Tray on the Windows Task Bar. (If the icon
does not appear, restart your computer.)
When the Interwrite Workspace icon
appears, it indicates that the eInstruction Device Manager is now running
in the background on your PC. Click
on the Workspace icon to display the
Device Manager menu options. Device
Manager, in addition to managing the
eInstruction hardware devices, provides
direct access to the Interwrite Workspace software.
Click the eInstruction icon
in the System Tray of the Windows Task
Bar to display the Device Manager Menu. Select the Check for Updates
option. If a new version of Workspace is available, download it now. You
should periodically check for updates.
Getting Started
Interwrite Mobi™
Installing the Software on the Mac
The Interwrite Workspace software must be installed on the Mac by
a user with Admin privileges. Interwrite Workspace is compatible
with Mac OS X version 10.4 or higher.
1 Log in as Admin.
2 Insert the Interwrite Workspace CD into the CD-ROM drive on
your Mac. An Interwrite Workspace CD icon will appear on your
desktop.
3 Double-click on the Interwrite icon on the desktop to display the
CD’s contents. Double-click on the Install Interwrite icon.
4 Follow the onscreen instructions for the software installation.
The appearance of the Interwrite
Workspace icon
on the Menu bar
indicates that the eInstruction Device
Manager is now running on your Mac.
It will load and run in the background
every time you start up your Mac. Click
on the eInstruction icon to display the
options on the Device Manager Menu,
shown here. Device Manager, in addition to managing the eInstruction hardware devices, provides direct access to
the Interwrite Workspace software on
the Mac.
9
10
Interwrite Mobi™
Getting Started
Installing the USB Workspace RF Hub
Plug the USB RF Hub into one of the USB ports
on your computer.
The RF Hub performs the following functions:
• Supports up to a maximum of 10 devices communicating simultaneously
• Connect button to support quick connection and pairing of devices
without software interaction, the target responsiveness is to connect
within 5 seconds.
Activation Button
Keeping Track of the Workspace RF Hub
The RF Hub is made to fit into the back of your Mobi Tablet. Place the Hub
into the allotted space. When the Hub is secure it will click into place.
Activation Button
RF Hub Space
Getting Started
Interwrite Mobi™
11
Connect the Interwrite Mobi
Complete the following steps to connect the Mobi to the computer.
1 Insert the RF Workspace Hub into the USB port on your computer.
Your computer will automatically detect the USB devices.
The blue LED on the Workspace RF Hub will light up when it is
plugged in.
2 Press the lighted Activation button on the RF Hub. The blue light
will start blinking.
3 Turn on the Mobi.
4 Turn the Mobi over and press the blue button next to the battery
opening to activate the Mobi’s RF signal.
You have two minutes to press the Activation button on the Mobi.
When the two RF devices have successfully paired, the blue button on the
RF Hub will stop blinking and remain a solid blue until either the computer
or the Mobi is turned off. Pairing the RF devices is a one-time operation.
They will recognize each other when the computer and the Mobi are
turned on.
Viewing Device Manager
If changing the preferences are required for the Mobi, use the eInstruction
Device Manager. Make sure the Interwrite Mobi is powered on.
Complete the following steps to view the Device Manager.
1 Click the eInstruction icon
in the System Tray on the
Windows Task Bar to display the Device Manager menu.
2 Click Device Manager. The eInstruction Device Manager
window opens.
3 Use the icons or Options menu to view or change the
preferences on the Mobi.
12
Interwrite Mobi™
Getting Started
Using the Device Manager Main Window
Once Device Manager is selected from the menu, the Device Manager
main window opens. From this window, you can connect devices, view
properties, identify connected devices, lock or unlock pads, and perform
other management functions.
The following table identifies the icons associated with the Device Manager
main window.
Icon
Name
Used To
Add Bluetooth
Locate and connect Bluetooth devices to the
Workspace software.
Connect or
Disconnect Device
Disconnect the device or devices from communicating
with Workspace.
Remove Device
Deletes Device from Device Manager.
Beep
Identify a specific Interwrite Device. Click Beep to
make the device beep.
Calibrate Board
Align the Interwrite Pen position relative to the
projected image on the Interwrite Board’s surface. Use
the Interwrite Pen to tap each white calibration point
as it appears on the blue screen.
Recalibration is required when either the Interwrite
Board or the projector has been moved.
Lock or Unlock
Device
Prevents all connected devices from inputting to the
current session. Locked Pads remain connected unless
they are powered off.
Select or Deselect
Presenter
Allows for a specific device to control the interaction
of Workspace and has control over the other
connected Interwrite Devices in a session.
Autoconnect Device
Connects pre-selected devices when Device Manager
is activated.
Properties
Opens the Properties window for the selected
Interwrite Device.
Getting Started
Interwrite Mobi™
13
Operating the Mobi
The Interwrite Mobi provides the freedom to interact with a projected
presentation from anywhere in the room. You can write annotations and
run applications remotely, giving you the opportunity to engage others and
encourage participation.
You use the electronic Interactive Pen on the Interwrite Mobi’s active area,
the area defined by the Tablet Insert, to move the mouse cursor on the
projected image, to select and use Workspace tools, and to click on the
programmable SoftKeys indicated along the top of the Tablet Insert.
KWIK Screen
Navigation
Buttons
Power Button
Softkeys
Active Area
Top of Mobi
Pen/ Pen Storage
Mobi Dock Charging Contacts Mini USB port for Charging
(Optional Accessory)
14
Interwrite Mobi™
Getting Started
Replacing the Interwrite Mobi Battery
Pack
The Interwrite Mobi’s battery pack is accessed from the back of the
Tablet.
Battery
Connector
Battery Cover
Battery Connector
Complete the following steps to replace the battery:
1 Turn your Interwrite Mobi over and push down on the Tab and lift
the Battery Cover away from the back.
3 Lift the Battery Pack out of the compartment.
4 Discard the old Battery Pack, following the proper disposal
procedures.
5 Insert the battery so that the metal contacts on the battery align
with the metal contacts on the Mobi.
6 Gently push the battery inside until it snaps into place
7 Fit the Battery Cover into the grooves and slide it back into place
until it clicks into place.
Getting Started
Interwrite Mobi™
15
Operating the Buttons
To operate any of the three buttons, push down or use the Pen vertically above the
button and touch the Pen Tip to the button and hold for several seconds.
On/Off Button
Press the On/Off Button for three seconds to activate the Mobi. The Mobi will go
into Sleep Mode after X minutes of inactivity.
Navigation Buttons
The Navigation Buttons to the right of the KWIK screen allow for moving through
the KWIK Screen options.
Connect Button
The Connect button on bottom of the Mobi allows for it to communicate with the
Workspace RF Hub and is recessed to avoid accidental activation.
Mobi Status Indicators
The following table identifies the icons associated with the Mobi status within the
KWIK screen.
Icon
Indicates
Used To
Mouse Mode
Mobi is being used as a mouse
on the computer.
Paired with
computer
Mobi is paired with the
computer. This flashes when
paired with the computer.
It is blank when there is no
connection.
USB
Mobi is connected to the
computer via the USB port.
In Prox
Pen is within the proximity and
can be detected by the Mobi
In Menu
The KWIK menu is in use. This
icon is blank if it is out of prox.
Battery Life
Indicator
Indicates amount of battery life
left before charging. The battery
icon shows it is filling as it is
charging
Pen Charge
Pen is charging within the pen
slot.
16
Interwrite Mobi™
Getting Started
Mobi Learner Status Indicators
The following table identifies the icons associated with the Mobi Learner status
within the status screen.
Icon
Indicates
Used To
Mouse Mode
Mobi Learner is being used as a
mouse on the computer.
Paired with
computer
Mobi Learner is paired with the
computer. This flashes when
paired with the computer.
It is blank when there is no
connection.
In Prox
Pen is within the proximity and
can be detected by the Mobi
In Menu
The Mobi Learner is in use.
Battery Life
Indicator
Indicates amount of battery life
left before charging. The battery
icon shows it is filling as it is
charging
Pen Charge
Pen is charging within the pen
slot.
Getting Started
Interwrite Mobi™
Working with the Mobi KWIK Screen
Use the following screens to configure the KWIK screen within Interwrite
Response or the Classroom Performance System (CPS). While using the
Mobi, use the navigational buttons to scroll through the selected Student
Response System (SRS) reports.
KWIK Screen Settings within CPS
Select the checkbox to view the CPS report on the KWIK screen.
KWIK Screen Settings within Interwrite Response
Select the checkbox to view the Response report on the KWIK screen.
17
18
Interwrite Mobi™
Getting Started
Selecting KWIK Screen Reports
The following table describes the reports available for viewing from the KWIK
screen.
Report
Description
Session Overview
Displays general overview of SRS session being
conducted.
Response Per Student
Student response is displayed and a green check
mark is displayed for correct responses and red X for
incorrect responses. Total cumulative percentage is
displayed for all students on this question.
Response Grid
Displays all correct or incorrect is indicated with a
green check mark or red X. Option within SRS to
show only correct or incorrect responses.
Bar Graph Per Question
Displays a horizontal bar for each answer option. The
length of the bar is proportional to the percentage
of students who submitted that answer option. Total
responses are listed along the bottom of the screen.
Cumulative Session Score
Provides cumulative score by student for a group of
questions.
Summary Per Question
Total cumulative percentage is displayed for all
students, for all questions.
Accessing SRS Reports with the Mobi
While using the Mobi, and one of the SRS products, you can access the
Session Information via the KWIK screen. To access the reports:
1 Click the SRS Clicker icon
located on the Softkeys at the top of the
Active Area.
The KWIK Screen launches and displays the Session Overview report.
2 Click the SRS Clicker icon
to move between the reports. Each time
you click the icon, the next report displays in the KWIK Screen.
3 Use the Navigational Buttons to scroll through the information within
the reports that do not fit within the parameters of the KWIK Screen. For
example, you would use the buttons when you have a list of questions or
students that is larger than the KWIK Screen display.
Getting Started
Interwrite Mobi™
19
Getting Started with Interwrite Workspace
The purpose of this document is to give you a feel for the Interwrite system
by showing you how to select and use a tool in Lesson Mode. The Annotation Tools of Lesson Mode consist of freehand tools, text tools and drawing tools. Of the freehand tools, the Pen tool is the most frequently used
Interwrite Workspace Tool. The following pages describe how to select and
configure the Pen tool.
The Workspace system is at the heart of a successful interactive collaboration, whether it is in a classroom of fourth graders studying world geography,
or in a boardroom of corporate executives brainstorming a new product
launch. All the tools you will need to stimulate inspiration, connection and
participation can be found in the Interwrite Workspace software. Here’s a
quick look at the Workspace basics to get you started.
Workspace Modes
Interwrite Workspace is run in one of two operational modes, Lesson Mode
or Office Mode (Windows only).
Workspace Tools have been categorized as Annotation Tools, Editing Tools,
Page Tools, Presentation Tools, Multimedia Tools, Navigation Tools, File
Management Tools, and Setup Tools. The Interwrite Workspace Help file
describes all these tools in detail and can be accessed from the Workspace
Menu.
Office
Office Mode makes it possible to interact directly with the native files of the
Microsoft Office suite of products, PowerPoint, Word and Excel.
Lesson
Lesson Mode allows you to open and run applications while in Mouse
Mode, using the tip of your electronic Interwrite Pen on the Interwrite Panel
screen to move the cursor. In Lesson Mode, you use the Interwrite Pen to
select Interwrite Workspace Tools from the Toolbar.
20
Interwrite Mobi™
Getting Started
Begin an Interwrite Workspace Session
1 When you are ready to begin an Interwrite Workspace session, turn
on your Interwrite Mobi. The Mobi must be active and connected.
You can verify this in Device Manager.
2 You can start Workspace Lesson Mode in one of three ways:
• By using your electronic Interwrite Pen to click on the
Interwrite Workspace icon
• On the Windows Task Bar or the Mac’s Menubar to display the
Device Manager Menu. Select Interwrite Workspace from the
menu.
• By using Start>All Programs>eInstruction>Interwrite
Workspace in Windows.
The Workspace Toolbar displays on the screen.
By default, the Intermediate Toolbar is
shown here. A more advanced toolbar
can be selected in the Customize Toolbar
Preferences option.
When you start up Interwrite Workspace in Lesson
Mode, the Toolbar displays, along the right side of the
projected desktop image, At that time, Workspace is in
Mouse Mode.
Use your Interwrite Pen to select the Pen tool from the
Toolbar. Select a capture option from the Capture dialog, click on the window, or click and drag to capture a
portion of the screen.
Your capture is displayed in the Lesson Window. Or,
you can start up Annotation Mode by selecting one of
the Page Creation Tools.
The page type you select is displayed in the Annotation
Window and the Pen tool is automatically selected.
Once the Lesson Window is open, you can begin writing or drawing on the page.
Getting Started
Interwrite Mobi™
The Interwrite Workspace Toolbars
Lesson Mode
Office Mode
Minimize Toolbar
Minimize Toolbar
Workspace Menu
Workspace Menu
Mouse Mode tool
Mouse Mode tool
Lesson Mode
Annotate Over Desktop
Office Mode
Lesson Mode
Annotate Over Desktop
Office Mode
Selection tool
Selection tool
Pen tool
Previous Page
Highlighter tool
Eraser tool
Shape tool
Line tool
Type Text tool
Undo Previous Action
Clear
Create Blank Page
Create Grid Page
Gallery tool
Previous Page
Next Page
Page Sorter tool
Save
Next Page
Pen tool
Highlighter tool
Line tool
Eraser tool
Type Text tool
Freehand Text tool
Stamper
Launch Microsoft PowerPoint
Launch Microsoft Word
Launch Microsoft Excel
Insert Annotations
Insert Selected Annotations
Add Blank Slide
Insert Slide in PowerPoint
Toolbox
Clear
SRS tool
SRS tool
Exit
Exit
21
Interwrite Mobi™
Getting Started
Using the Pen Tool
The attributes of the Pen tool can be changed by selecting different options from the Properties Bar at the bottom of the Annotation Window.
Select the Pen tool’s Down Arrow to display its Tool Settings Menu.
Properties Bar
The Pen tool Properties Bar provides options to change line color,
width, transparency, and line ends and line styles. Each attribute change
is displayed in the Preview Box.
st
yl
r
ds
th cy
lo
co wid ren e en
e
a
lin Line nsp Lin
ne
e
Li
a
g
tr
an
ne
i
Ch
L
or
l
co
es
Properties Bar
ie
D
as
h
ev
Pr
w
x
bo
Change the Pen tool’s line color and width to determine how it will affect the look of your annotations. The best way to familiarize yourself
with all the different Interwrite Workspace tools and how they can be
used to enhance your presentations is to experiment with them.
Page Functions
Workspace also provides the ability to move within pages within the
window. Select the functions at the bottom of the screen to pan a page,
move between pages, use the Student Response System (SRS) tool
(optional), or discard annotations.
Cu
N
qu ext
es
tio
n
rt
se
tl
en
rr
n
io
at
oc
In
n
p
Pr age
ev
io
us
Trash
Pa
22
Getting Started
Interwrite Mobi™
Presentation Files
The presentation file is made up of your annotated pages. The Page Creation and Capture tools are used to create the pages in the presentation
file and the Annotation Tools are used to create the annotations. The presentation file is automatically saved as a .GWB file.
As soon as you select an Annotation Tool, an untitled presentation file is
created. Unless you give the file a name, it is automatically saved using
today’s date as the filename. (Multiple files created today have 01, 02,
03, etc., appended to the date name.)
An existing presentation file can be opened, its pages can be sorted,
annotations can be added to the existing pages, and new pages can be
added to the file. Your presentation will determine how each presentation file evolves. For example, you can prepare a presentation file with
blank maps for a geography lesson. Or, you can capture and annotate
each of the monthly earnings spreadsheets as you review the past fiscal
year during a budget meeting. Or, you can run a PowerPoint Slide Show
in Office Mode (Windows only), where annotations added to the slides
are saved in the native file.
Building the Presentation File
You can build your presentation file during your presentation, or you can
pre-build it, including the screen captures, images, graphs and text pages
you want to present. However you choose to do it, the process is the
same.
To capture a screen or window, click on the Mouse Mode tool with your
Interactive Pen and arrange the desktop for capture. Select an Annotation Tool, the Pen, for example, indicate your capture preference (by
clicking on either the Partial, Window, or Screen option in the dialog),
and annotate the captured image.
Use the Page Creation Tools to add a blank, gridded, or background image page. By default, Interwrite Workspace is in Autosave mode, so your
annotated pages are automatically saved as you build your presentation
file.
Click the Save tool to save the file using the default filename (today’s
date), or a name you type on the pop-up Onscreen Keyboard.
23
24
Interwrite Mobi™
Getting Started
Distributing Presentation Files
The Interwrite Workspace presentation files you create can be printed for
local distribution, or emailed to anyone, anywhere.
Use the Page Sorter tool to review the presentation file. The pages in the
presentation file can be sorted, moved, duplicated, merged, and deleted
using the Page Sorter tool. When the file pages have been arranged to your
satisfaction, you can use Page Sorter’s export option to export it to one of
a number of file formats, or you can close Page Sorter and select an option
from the Workspace File Menu.
The native file format of saved presentation files has the .GWB extension.
GWB files can be read on any computer on which Interwrite Workspace is
installed. For general distribution, we recommend exporting the presentation
file to the PDF format using the Export PDF File tool located in the Toolbox,
or by selecting the the Export PDF File option from the Workspace File
Menu.
Now everyone can stay in the information loop, whether they were able to
attend the presentation or not.
Additional eInstruction Resources
We invite you to visit the eInstruction Web site at
www.einstruction.com
where we have provided a variety of resources to help make your Interwrite
Workspace experience more rewarding. We especially encourage you to
visit
www.einstruction.com/support_interwrite.htm
and
www.einstruction.com/erc/index.htm.
What are Response and CPS?
Interwrite Response and the Classroom Performance System (CPS) are
Audience Response Systems, comprehensive response systems for electronically testing, polling, and surveying a group of people. They can be used
in conjunction with Interwrite Workspace to take a survey of the audience
response to the presentation, or to test the level of comprehension after a
lesson presentation, for example. Learn more about Response and CPS by
visiting our Web site.
Getting Started
Interwrite Mobi™
25
Battery Handling and Precautions
•
Always charge batteries prior to first use.
•
Never short-circuit batteries or reverse polarity.
•
Do not incinerate or dismantle batteries. Cell components are corrosive and may be harmful
to skin and eyes.
•
Do not pull on battery lead wires or connectors. Excessive force on the leads or connectors
can damage the welding joints and other connections.
•
Do not mix with other battery types. It could cause leaks, or an explosion, resulting in
personal injury.
•
Dispose of properly.
•
Replace only with the same or an equivalent battery type recommended by eInstruction,
Gb/t 18287-2000.
Manipulation de la batterie et précautions
•
Chargez toujours la batterie avant la première utilisation.
•
Ne court-circuitez jamais une batterie et n’en inversez jamais les polarités.
•
N’incinérez pas et ne démontez pas la batterie. Leurs cellules sont corrosives et présentent
un risque pour la peau et les yeux.
•
Ne tirez pas sur les fils métalliques de la batterie ni sur ses connecteurs. Une pression
excessive sur les fils ou les connecteurs risque d’endommager les joints et les autres
connexions.
•
N’utilisez pas en conjonction avec d’autres types de batterie. Vous risquez de provoquer des
fuites ou une explosion pouvant occasionner des blessures corporelles.
•
Mettez la batterie au rebut de manière adéquate.
•
Remplacez-la uniquement par une batterie identique ou de type équivalent recommendée
par eInstruction, Réf. Gb/t 18287-2000.
26
Interwrite Mobi™
Getting Started
Handhabung des Akku und Vorsichtsmaßnahmen
•
Laden Sie den Akku vor dem ersten Gebrauch stets auf.
•
Schließen Sie den Akku niemals kurz und verändern Sie niemals seine Polarität.
•
Verbrennen und demontieren Sie keine Akkus. Bestandteile des Akku sind ätzend und
können schädlich für
Haut und Augen sein.
•
Ziehen Sie nicht an Akkuanschlussdrähten oder Anschlussklemen. Übermäßige
Kraftanwendung an Anschlussdrähten oder -klemmen kann die Schweißpunkte und andere
Verbindungen beschädigen.
•
Benutzen Sie den Akku nicht zusammen mit anderen Batterien. Dies könnte ein Auslaufen
oder eine
Explosion verursachen, was Personenschäden zur Folge haben könnte.
•
Entsorgen Sie den Akku ordnungsgemäß.
•
Ersetzen Sie den Akku nur mit dem gleichen oder einem gleichwertigen Batterietypen, der
von eInstruction, Gb/t 18287-2000 empfohlen wird.
Gestione e precauzioni relativi alla batteria
•
Caricare le batterie sempre prima del primo utilizzo.
•
Non cortocircuitare mai le batterie o invertire la polarità.
•
Non incenerire o smontare le batterie. I componenti degli elementi sono corrosivi e
possono essere nocivi alla pelle ed agli occhi.
•
Non tirare i fili conduttori o i connettori della batteria. Una forza eccessiva sui conduttori
o connettori può danneggiare i giunti saldati ed altri collegamenti.
•
Non mescolare con altri tipi di batteria. Potrebbe causare perdite o un’esplosione, avendo
come conseguenza lesioni a persone.
•
Smaltire la batteria secondo le normative.
•
Sostituire solo con lo stesso tipo, o un tipo equivalente, di batteria consigliato da
eInstruction, Gb/t 18287-2000.
Precauciones y manipulación de baterías
•
Cargue siempre las baterías antes de utilizarlas por primera vez.
•
Nunca ponga en cortocircuito baterías o invierta la polaridad.
•
No incinere o desmonte las baterías.Los componentes de la celda son corrosivos y pueden
producir lesiones en la piel y los ojos.
•
No tire de los cables conductores de la batería ni de los conectores. Ejercer exceso de fuerza
en los cables conductores o en los conectores puede dañar las uniones soldadas u otras
conexiones.
•
No intercambie con otros tipos de baterías.Podría producir fugas, explosión o causar
heridas graves.
•
Desheche las baterías adecuadamente.
•
Sustituya sólo con baterías del mismo tipo o equivalentes recomendadas por eInstruction, Gb/t 18287-2000.
Getting Started
Interwrite Mobi™
27
Limited Warranty for the Interwrite Mobi
IeInstruction warrants these products to be free from defects in material and workmanship under the following terms. Complete
and return the enclosed warranty registration card to ensure that your products are covered by this warranty.
Coverage
Parts and labor are warranted for one (1) year from the date of the first consumer purchase for the Interwrite Mobi, electronic Pen, Tablet Charger,
and accessories. This warranty applies to the original consumer purchaser only.
Within the European Union, the warranty period is two (2) years, as mandated by the EU. Contact your local dealer or distributor for additional
warranty information.
Warranty is valid only if original consumer’s purchase or lease date is less than or equal to six months from the original eInstruction sale date. This
information will be captured by the system serial number and confirmed by the reseller’s purchase order.
A nominal Warranty Handling Fee will be charged after the first 90 days of use and calculated from the date of original consumer purchase. This
payment may be made by Visa, MasterCard, or American Express. A copy of the sales receipt or invoice will be required for warranty verification.
Conditions
Except as specified below, this warranty covers all defects in material or workmanship in the products. The following are not covered by the
warranty:
1. Any product on which the serial number has been defaced, modified, or removed (if applicable).
2. Damage, deterioration, or malfunction resulting from:
a. Accident, misuse, abuse, neglect, fire, water, lightening, or other acts of nature, unauthorized product modification for any purpose,
or failure to follow instructions supplied with the product.
b. Repair, or attempted repair, by anyone not authorized by eInstruction.
c. Any damage in shipment of the product (claims must be presented to the carrier).
d. Any other cause which does not relate to a manufacturing defect.
3. Any product not sold or leased to a consumer within six months of eInstruction’s original sale date.
4. Consumable parts, e.g., batteries, dry-erase markers, eraser felt.
eInstruction will pay all labor and material expenses for covered items, but will not pay for the following:
1. Removal or installation charges.
2. Costs for initial technical adjustments (set up), including adjustments of user controls.
3. Certain shipping charges. (Payment of shipping charges is discussed in the next section of this warranty.)
4. Packaging costs. (Customers should keep their boxes.)
Warranty Service Procedures
1.
2.
3.
4.
5.
To obtain service on your eInstruction product, contact the Technical Support Department to receive a Return Material Authorization
Number (RMA#) and shipping instructions by calling:
In United States:
(480) 443-2214 (MST)
In Europe:
+33 1.58.31.10.60 (CET)
Ship the product to eInstruction with the RMA# marked clearly on the outside of the box. eInstruction reserves the right to refuse the
shipment, if not properly marked.
Although the consumer must pay any shipping charges to ship the product to eInstruction for warranty service, eInstruction will pay the
return shipping charges for ground shipment. Other shipping options are available at an additional fee.
Whenever warranty service is required, the original dated sales invoice (or a copy) must be presented as proof of warranty coverage,
and should be included in shipment of the product. In addition, please include your name, address, telephone number, fax number,
email address, and a description of the problem.
If eInstruction determines that the unit is not defective within the terms of the warranty, the consumer shall pay the cost of all freight
charges, as well as any repair charges.
Technical Support
Web-based Technical Support is available free of charge at: www.einstruction.com, where current driver releases, as well as comprehensive
technical support, troubleshooting, Technical Bulletins and FAQs can be found.
Telephone Technical Support is available free of charge to the original consumer for a period of 90 days from the date of purchase of the product.
Please contact our Technical Support Department:
In United States:
(480) 443-2214 (MST)
In Europe:
+33 1.58.31.10.60 (CET)
You can also fax your request to:
In United States:
(480) 948-5508 (MST)
In Europe:
+33 1.58.31.10.69 (CET)
Our toll-free number in the U.S. is: 800-856-0732 (MST)
Disclaimer of Unstated Warranties
The warranty printed above is the only warranty applicable to this purchase. ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Assuming the warranty above stated is otherwise applicable, it is expressly understood and agreed that eInstruction’s sole liability, whether
in contract, tort, under any warranty, in negligence, or otherwise, shall be for the repair or replacement of the defective parts, and under no
circumstances shall eInstruction be liable for special, indirect, or consequential damages. The price stated and paid for the equipment is a
consideration in limiting eInstruction’s liability.
Notice
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply
to you. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state, or province to province.
To obtain service on your eInstruction product, call our Technical Support Department at
(480) 443-2214 (MST), or fax us at (480) 948-5508 (MST);
in Europe call +33 1.58.31.10.60 (CET), or fax us at +33 1.58.31.10.69 (CET).
We can also be contacted through our Web site at www.einstruction.com or www.interwritelearning.com (in US), at EUOffice@gtcocalcomp.com
(in Germany), or at infos@calcomp.fr (in France). Important! All products returned to eInstruction for service must have prior approval in the
form of a Return Merchandise Authorization Number (RMA#), which can be obtained by calling the Technical Support Department.
Corporate Headquarters
Western Office
308 N Carroll Blvd.
Denton, TX 76201
8224 East Evans Road
Scottsdale, Arizona 85260
Tel: 888.707.6819
Tel:
Fax: 940.565.0959
Support: 480.443.2214
Fax:
480.948.6540
480.948.5508
European Headquarters
Centre Education Europe
26/36 rue Alfred Nobel
93600 Aulnay Sous Bois
France
TEL: +33 1.58.31.10.60
FAX: +33 1.58.31.10.69
www.interwritelearning.fr
www.einstruction.com/support
Support: 480.443.2214
Copyright© 2008 eInstruction
Workspace is a trademark of eInstruction, Inc.
Interwrite is a registered trademark of eInstruction, Inc.
Bluetooth is a trademark of, and is owned by, Bluetooth SIG, Inc., U.S.A.,
and is licensed to eInstruction.
All other products and company names are the trademarks or registered
trademarks of their respective owners.
The information contained in this document is subject to change without notice. eInstruction assumes no responsibility
for technical, or editorial errors, or omissions that may appear in this document, or for the use of this material. Nor
does eInstruction make any commitment to update the information contained in this document. This document
contains proprietary information which is protected by copyright. All rights reserved. No part of this document can
be photocopied or reproduced in any form without the prior, written consent of eInstruction.
37-01283-01 Rev. B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising