HP | LH4r - NetServer - 256 MB RAM | Technical information | HP LH4r - NetServer - 256 MB RAM Technical information

HP LH4r - NetServer - 256 MB RAM Technical information
United States
configuration and
options guide
xSer ies Ser ver s
Netfinity Ser vers
Storage Enclosures
Fibre Channel Solutions
Options
Ser vices
ibm.com/pc/us/eserver/xseries/library
April/May 2001
Information Sources .................................................. 2
IBM FAStT EXP500 (35601RU) .............................115
Server Product Positioning ........................................ 4
Fibre Array Solutions..............................................117
IBM xSeries and Netfinity® Selection Guide............. 6
High Availability and Scalable Cluster Solutions ...125
IBM xSeries 130/135 ............................................... 10
IBM Datacenter Solutions ......................................129
IBM xSeries 200
IBM Netfinity NetBAY3/NetBAY3E™ Stackable
Enclosures .............................................................135
................................................... 14
TABLE OF CONTENTS
Table of Contents
IBM xSeries 220 ..................................................... 22
Rack Cabinet and Options ....................................137
IBM xSeries 230 and Netfinity 5100 ........................ 30
Appendix A: Tape Drive Attributes ........................142
IBM xSeries 240 and Netfinity 5600 ....................... 38
Appendix B: Tape Library Attributes .....................143
IBM xSeries 250 ..................................................... 46
Appendix C: UPS Runtime Estimate (minutes)......146
IBM xSeries 330 ...................................................... 56
IBM xSeries 340 and Netfinity 4500R...................... 64
Appendix D: SCSI Cables - Storage Units Controllers..............................................................148
IBM xSeries 350 and Netfinity 6000R...................... 72
Appendix E: IBM Serial I/O ....................................149
IBM xSeries 370 and Netfinity 8500R ..................... 80
IBM ServicePac for Warranty and Maintenance
Options for IBM Servers and Server Peripherals...151
IBM Netfinity 7100 ................................................... 90
IBM ServicePac for SmoothStart Services for
IBM Netfinity Servers .............................................154
IBM Netfinity 7600 ................................................ 100
IBM ServicePac for Installation Services ...............155
IBM External Storage Expansion Unit Overview ... 109
FAStT200 Storage Server (3542xRU) ................... 110
Important Notes .....................................................156
IBM EXP300 (35311RU) ....................................... 112
1
Information Sources
Canada
Audience
Where to go
How to get
IBM xSeries Configuration and Options Guide
Customers
www.pc.ibm.com/ca/eserver/xseries/index.shtml
Business Partners
www.pc.ibm.com/partner/ca
Select “Sales Tools” and then “Marketing Essentials.” User ID and Password required.
IBM Employees
Marketing Essentials
By Brand category --> IBM Netfinity or By Brand category --> PC Configurator
Feedback
www.pc.ibm.com/partner/ca/feedback.html
IBM xSeries and Netfinity Rack Configurator
Customers
www.pc.ibm.com/ca/eserver/xseries/index.shtml
Business Partners
www.pc.ibm.com/partner/ca
Select “Sales Tools” and then “Marketing Essentials.” User ID and Password required.
IBM Employees
Marketing Essentials
By Brand category --> IBM Netfinity or By Brand category --> PC Configurator
Feedback
ibm_netfinity_rack_configurator@vnet.ibm.com
E-mail
PCSales Guide/Configurator and WorkPad Pricer (Updated weekly or biweekly)
Customers
www.can.ibm.com/config
Download PSC-NA1 and PSC-NA2
Business Partners
www.pc.ibm.com/partner/ca/
Download PSC-NA1 and PSC-NA2, 3 or 4
User ID and Password required
IBM Employees
PartnerNEWS
Configurator, PSC-NA1 and PSC-NA2, 3 or 4
Feedback
bburgess@ca.ibm.com
E-mail
Latest Product & Technical Information
Customers
www.pc.ibm.com/ca/eserver/xseries/index.shtml
Business Partners
www.pc.ibm.com/partner/ca or call the PSMT
User ID and Password required
IBM Employees
Marketing Essentials
By Brand category --> IBM Netfinity or By Brand category --> PC Configurator
Latin America
IBM xSeries Configuration and Options Guide
Customers
www.pc.ibm.com/us/eserver/xseries/library
Select “Configuration Tools”
Business Partners
Marketing Essentials in ePartner
See footnote 2
IBM Employees
Marketing Essentials in Lotus Notes PartnerInfo
By Brand category --> IBM Netfinity or By Brand category --> PC Configurator
Feedback
laconfig@us.ibm.com
E-mail
IBM xSeries and Netfinity Rack Configurator
Customers
www.pc.ibm.com/us/eserver/xseries/library
Select “Configuration Tools”
Business Partners
Marketing Essentials in ePartner
See footnote 2
IBM Employees
Marketing Essentials in PartnerInfo
By Brand category --> IBM Netfinity or By Brand category --> PC Configurator
Feedback
ibm_netfinity_rack_configurator@vnet.ibm.com
E-mail
OrderBUILDER1 (updated weekly)
Business Partners
Marketing Essentials in ePartner
IBM Employees
Marketing Essentials in PartnerInfo
See footnote 2
By Brand category --> IBM Netfinity or By Brand category --> PC Configurator
Feedback
laconfig@us.ibm.com
E-mail
Latest Product & Technical Information
Customers
www.pc.ibm.com/la
Business Partners
www.pc.ibm.com/la/ or www.pc.ibm.com/br
See footnote 2
IBM Employees
Marketing Essentials in PartnerInfo
By Brand category --> IBM Netfinity or By Brand category --> PC Configurator
1. OrderBUILDER has features that are unique to a geographical region and should be downloaded from a source intended for use in that region.
2. ID and Password required. Spanish==>www.pc.ibm.com/la. Select Partner World/VAR 2000. Then select either PartnerWorld or VAR2000 and request an ID and Password.
Brazil==> www.pc.com/br/. Select PartnerWorld and then Formulario de Cadastramento. If you have an ID/Password, Spanish==> www.pc.ibm.com/la/. Select PartnerWorld/VAR2000.
Then select Marketing Essentials, then PC Configurator. Brazil==> www.pc.ibm.com/br/. Select PartnerWorld and then Marketing Essentials.
***See Next Page for United States and Additional URLs***
2
United States
Audience
Where to go
How to get
IBM xSeries Configuration and Options Guide
Customers
www.pc.ibm.com/us/eserver/xseries/library
Select “Configuration Tools”
Business Partners
www.pc.ibm.com/partner/us/
Select Marketing Essentials > PC Configurator > Server Paper Configurator. User ID and
Password required.
IBM Employees
Marketing Essentials
By Brand category --> IBM Netfinity --> Configurators or
By Brand category --> PC Configurator
Feedback
www.pc.ibm.com/partner/us/feedback.html
IBM xSeries and Netfinity Rack Configurator
Customers
www.pc.ibm.com/us/eserver/xseries/library
Select “Configuration Tools”
Business Partners
www.pc.ibm.com/partner/us/
Select Sales Tools, then Marketing Essentials, then IBM PC Server--> Rack Configurator.
User ID and Password required.
IBM Employees
Marketing Essentials
By Brand category --> IBM Netfinity or By Brand category --> PC Configurator
Feedback
ibm_netfinity_rack_configurator@vnet.ibm.com
E-mail
Customers
www.pc.ibm.com/us/orderbuilder
Business Partners
www.pc.ibm.com/partner/us
IBM Employees
Marketing Essentials
By Brand category --> IBM Netfinity or By Brand category --> PC Configurator
Feedback
pcconfig@us.ibm.com
E-mail
INFORMATION SOURCES
OrderBUILDER1 (updated bi-weekly)
Select Sales Tools, then OrderBUILDER. User ID and Password required.
Latest Product & Technical Information
www.pc.ibm.com/us/eserver/xseries
or call 1-800-772-2227
Customers
Business Partners
www.pc.ibm.com/partner/us/ or call 1-800-426-7763
Select Products & Services; User ID and Password required
IBM Employees
Marketing Essentials
By Brand category --> IBM Netfinity or By Brand category --> PC Configurator
Additional URLs
Audience
Where to go
How to get
Technical spec sheets (PSREF)
www.ibm.com/us/eserver/xseries/library
Select “Technical spec sheets (PSREF)”
IBM Datacenter Solutions
www.developer.ibm.com/welcome/netfinity
Under “News” select “Solutions Library.” Under “Most Popular Solutions” select “Windows
2000 Datacenter Server”
Clustering (US, LA)
www.pc.ibm.com/ww/eserver/xseries/clustering/index.html Select desired category or Server
Clustering (CAN)
www.pc.ibm.com/ww/eserver/xseries/clustering/index.html Select desired category or Server
Benchmark Results
www.pc.ibm.com/ww/eserver/xseries/benchmarks/
Select desired category or Server
Options/NOS/Server compatibility
www.pc.ibm.com/us/compat
From pulldown select desired category
NOS - Hot-Plug/Failover Support
www.pc.ibm.com/us/compat
From pulldown select “Netfinity Hotplug PCI and Failover Info.”
IBM Storage Products
www.storage.ibm.com
Adobe® Acrobat® Reader V 3.0 or 4.0
www.adobe.com/products/acrobat/readstep.html
Follow instructions.
Adv. Sys. Mgmt. Adapter Firmware
www.pc.ibm.com/us/eserver/xseries/index.html
Select “Support,” “Family,” “Model,” “Downloadable files” and “Advanced Systems
Management”.
Flash BIOS Updates
www.pc.ibm.com/support
Enter machine “Type-Model” in Quick Path. Select “Downloadable files” then “BIOS.”
www.pc.ibm.com/support
Select “Server” in Brand pulldown, “ServeRAID” in Family pulldown and then
“Downloadable files.”
ServeRAID Updates
1. OrderBUILDER has features that are unique to a geographical region and should be downloaded from a source intended for use in that region.
The information contained in this document has not been submitted to any formal IBM test. The following paragraph does not apply to the
United Kingdom or any country where any such provisions are inconsistent with local law:
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. SOME STATES DO NOT ALLOW DISCLAIMER OF EXPRESS OR IMPLIED WARRANTIES IN CERTAIN TRANSACTIONS.
THEREFORE, THIS STATEMENT MAY NOT APPLY TO YOU. THERE IS NO GUARANTEE THAT IBM WILL MARKET ANY PARTICULAR PRODUCT
IN YOUR COUNTRY.
The use of this information or the implementation of any of these techniques is a customer responsibility and depends on the customer’s ability
to evaluate and integrate them into the customer’s operational environment. While each item may have been reviewed by IBM for accuracy in a
specific situation, there is no guarantee that the same or similar results will be obtained elsewhere. Customers attempting to adapt these
techniques to their own environments do so at their own risk.
The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM
Business Partner or IBM Marketing Representative for assistance with your specific configuration requirements.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
3
Server Product Positioning
IBM xSeries and Netfinity servers
Increased Capacity:
Application
Memory
Storage
Slots
Availability Features
x3
70
x3
50
x2
76
00
x2
4
x2
30
x3
40
x2
X
22
0
x3
30
/4
50
/6
/8
00
50
0R
0R
71
00
0
/5
60
0
/5
10
0
50
0R
00
File and
Print
Number of Clients
4
When in a competitive situation, this table suggests the appropriate IBM Netfinity server to bid against other vendors’ equipment. However, as an IBM business
partner, you may determine that customer specific requirements may make an alternative IBM solution a better choice
Value
Price Performance
2-way
IBM: xSeries 250, Netfinity 7100
Compaq: ProLiant ML570
Dell: PowerEdge 6400
HP: NetServer LH4
IBM: Netfinity 7600
Compaq: No Offering
Dell: No Offering
HP: NetServer LXr 8000
IBM: xSeries 350 / Netfinity 6000R
Compaq: ProLiant DL580
Dell: PowerEdge 6450
HP: NetServer LH4r
IBM: xSeries 230 / Netfinity 5100
Compaq: ProLiant ML370
Dell: PowerEdge 2400
HP: NetServer LC2000
IBM: xSeries 240 / Netfinity 5600
Compaq: ProLiant ML530
Dell: PowerEdge 4400
HP: NetServer LH 3000
IBM: xSeries 330, xSeries 340/
Netfinity 4500R
Compaq: ProLiant DL380, DL360
Dell: PowerEdge 2450
HP: NetServer LPr
IBM: xSeries 200
Compaq: ML330
Dell: No Offering
HP: No Offering
PRODUCT POSITIONING
Uni
IBM: xSeries 220
Compaq: ProLiant ML350
Dell: PowerEdge 1300
HP: NetServer E60
Rack Optimized
IBM: xSeries 370 / Netfinity 8500R
Compaq:ProLiant 8500
Dell: PowerEdge 8450
HP: NetServer LXr 8000
8-way
4-way
Mission Critical
IBM: xSeries 370 / Netfinity 8500R
Compaq: ProLiant 8000
Dell: No Offering
HP: NetServer LH 6000, LT6000R
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
5
IBM xSeries and Netfinity® Selection Guide
This graph represents general guidelines for selecting the appropriate server based on the number of users that can be supported in a
particular application environment. This chart is for general guidance since each customer environment is unique and is unlikely to be
precisely represented by any of the specific applications in the chart, but by using the chart, a reasonable approximation can be derived.
External Storage Units are utilized when internal capacities are exceeded. Utilize the chart by following the steps outlined on the following
page.
These are not published benchmark results. Access www.ibm.com/pc/us/techlink/srvperf.html to obtain benchmark data.
Application/
Expectation of
Maximum # of Users
DB Transaction Processing
Select, Update and Delete;
Does not include image or
Decision Support
File and Print
Application is stored locally.
(For server stored applications
- cut number of users in half).
Lotus Notes®
10% Power Users 40% Mail
50% Mail & DB
Microsoft® Exchange Server
5.5
100% Med Usersl
30MB Mailbox
SAP 3-Tier Distributed
Ver 4.0b
Processing
Sales and Distribution
Application (Minimum of 16-20
Servers)
SAP Central Version 4.0b
Processing
Sales and Distribution
Application
(One Server)
High Availability Features
Other Distinquishing
Features
6
1500
1
2GB
12 to 18
>1
1
1200
1
2GB
5 to 10
>1
xSeries 220
Dual Pentium
III 933MHz/
256KB
1970
2
768MB
40 to 50
>2
1
1000
2
768MB
4 to 8
1
>2
2
4
900
1
2GB
5 to 10
>1
>1
1980
2
1GB
9
1
>1
N/A
75
1
1GB
12
>1
1
Opt
2
2GB
145.6
1180
2
768MB
10 to15
1
>2
2200
2
1GB
10
>1
>1
N/A
80
1
1GB
12
>1
1
Opt
Opt
1
768MB
145.6
1950
2
2GB
20 to 30
1 to 2
>2
2310
2
2GB
10
1
>2
145.6
109.2
N/A
5
-
5
-
2
-
xSeries 200 UniPentium® III
866MHz1/256KB
# Users
# processors
Memory
# Hard Disk Drives
# RAID Adapters
# Network Connections
# Users
# Processors
Memory
# Hard Disk Drives
# RAID Adapters
# 100Mbps Ethernet
Connections
# Users
# Processors
Memory
# Hard Disk Drives
# RAID Adapters
# Network Connections
# Users
# Processors
Memory
# Hard Disk Drives
# RAID Adapters
# Network Connections
# Users
# Processors
Memory
# Hard Disk Drives
# RAID Adapters
# Network Connections
# Users
# Processors
Memory
# Hard Disk Drives
# RAID Adapters
# Network Connections
Hot-Swap HDD Bays
Hot-Plug PCI Slots
Hot-Swap Power
Hot-Swap Fans
RAID
Clustering Support
Sys Mgt Processor
Max # Processors
Max Memory
Max Int Storage (GB)2
Max Int Storage (GB)
with Int Tape drive
Available PCI Slots
19in Rack Models
NetBAY3x Support
xSeries 330
Dual Pentium
III 1GHz/256KB
2110
2
2GB
36 to 48
>2
1
2100
2
2GB
20 to 30
1 to 2
N/A
160
2
1GB
12 to 24
>1
1
Opt
2
2GB
72.8
IBM xSeries and Netfinity Selection Guide
DB Transaction
Processing
Select, Update and
Delete; Does not
include image or
Decision Support
File and Print
Application is stored
locally. (For server
stored applications cut
number of users in
half).
Lotus Notes
10% Power Users 40%
Mail
50% Mail & DB
Microsoft Exchange
Server 5.5
100% Med Users
30MB Mailbox
SAP 3-Tier
Distributed Ver 4.x
Processing
Sales and Distribution
Application (Minimum
of 16-20 Servers)
SAP Central Version
4.x
Processing
Sales and Distribution
Application
(One Server)
High Availability
Features
Other Distinquishing
Features
Updated 03/22/01
# Users
# processors
Memory
# Hard Disk Drives
# RAID Adapters
#Network Connections
# of Users
# of Processors
Memory
# Hard Disk Drives
# RAID Adapters
# 100Mbps Ethernet
Connections
# Users
# Processors
Memory
# Hard Disk Drives
# RAID Adapters
# Network Connections
# Users
# Processors
Memory
# Hard Disk Drives
# RAID Adapters
# Network Connections
# Users
# Processors
Memory
# Hard Disk Drives
# RAID Adapters
# Network Connections
# Users
# Processors
Memory
# Hard Disk Drives
# RAID Adapters
# Network Connections
Hot-Swap HDD Bays
Hot-Plug PCI Slots
Hot-Swap Power
Hot-Swap Fans
RAID
Clustering Support
Sys Mgt Processor
Max # Processors
Max Memory
Max Int Storage (GB)
Max Int Storage (GB)
with Int Tape drive
Available PCI Slots
19in Rack Models
NetBAY3x Support
xSeries
xSeries
xSeries
xSeries
350 /
340 /
xSeries 250
230 /
240 /
Netfinity
Netfinity
Quad
Netfinity
Netfinity
6000R
4500R
Pentium III
5100 Dual 5600 Dual
Quad
Dual
Xeon
Pentium Pentium III
Pentium III
Pentium
900MHz/
III 1GHz/
1GHz/
Xeon™
III 1GHz/
2MB
256KB
256KB
900MHz/
256KB
2MB
2530
2530
2530
7030
7030
2
2
2
4
4
4GB
4GB
4GB
4GB
4GB
30 to 50
30 to 50
30 to 50
80 to 140
80 to 140
>4
>4
>4
>4
>2
1 to 2
1 to 2
1 to 2
2 to 3
2 to 3
2100
2100
2100
5000
5000
2
2
2
2
2
2GB
2GB
2GB
2 to 4GB
2 to 4GB
20 to 30
20 to 30
20 to 30
50 to 90
50 to 90
>4
1 to 2
1 to 2
1 to 2
>4
xSeries
Netfinity Netfinity
370 /
7100
7600
Netfinity
Quad
Quad
8500R
Pentium Pentium Eight-Way
III Xeon III Xeon
Pentium
900MHz/ 900MHz/
III Xeon
2MB
2MB
900MHz/
2MB
7030
7030
11300
4
4
8
4GB
4GB
4GB
80 to 140
80 to 140
180 to 250
>4
>4
>5 or Fibre
2 to 3
2 to 3
2 to 3
5000
5000
6000
2
2
3 to 4
2 to 4GB
2 to 4GB
4GB
50 to 90
50 to 90
75 to 150
>4
>4
>4 or Fibre
4
4
4
8
8
8
8
10
2200
2
2 to 3GB
20 to 30
1 to 2
>2
2310
2
2GB
9
1
>1
160
2
1GB
12 to 24
>1
1
X
X
X
Opt
X
X
2
4GB
218.4
2200
2
2 to 3GB
20 to 30
1 to 2
>2
2310
2
2GB
12
1
>1
2790
2
1 to 2GB
24 to 36
>2
1
162
2
1 to 2GB
12 to 24
>1
1
X
Opt
Opt
X
X
2
4GB
218.4
2200
2
2 to 3GB
20 to 30
1 to 2
>2
2310
2
2GB
12
2
>1
2800
2
1 to 2GB
24 to 36
>2
1
180
2
1 to 2GB
12 to 24
>1
1
X
X
X
X
Opt
X
X
2
4GB
218.4
4615
4
3GB
20 to 30
2 to 3
>3
7800
4
>3GB
30 to 40
>2
>2
4000
4
>4GB
48 to 60
>3
1
300
4GB
>2GB
24 to 36
>2
1
X
Opt
X
X
Opt
X
X
4
16GB
364GB
4615
4
3GB
20 to 30
2 to 3
>3
7800
4
3GB
30
2
>2
4000
4
>4GB
48 to 60
>3
1
300
4
>2GB
24 to 36
>2
1
X
X
X
X
Opt
X
X
4
16GB
218.4
4615
4
3GB
20 to 30
2 to 3
>3
7800
4
>3GB
30 to 40
>2
>2
4000
4
>4GB
48 to 60
>3
1
300
4
>2GB
24 to 36
>2
1
X
Opt
X
X
Opt
X
X
4
16GB
364
4615
4
3GB
20 to 30
2 to 3
>3
7800
4
4GB
40 to 50
>3
>2
4000
4
>4GB
48 to 60
>3
1
300
4
>2GB
24 to 36
>2
1
X
X
X
X
X
X
X
4
16GB
364
7335
8
4GB
30 to 40
>3
>4
10000
8
4GB
40 to 50
>3
>2
6400
8
>4GB
48 to 60
>3
1
480
8
>4GB
24 to 36
>2
1
X
X
X
X
Opt
X
X
8
32GB
72.8
109.2
218.4
218.4
364GB
N/A
364
364
N/A
5
X
-
5
X
-
5
X
-
6
X
X
6
X
-
6
X
X
5
X
X
12
X
X3
N/A
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
SERVER SELECTION
GUIDANCE
Application/
Expectation of
Maximum # of
Users
7
1. MHz only measures microprocessor internal clock speed, not application performance. Many factors affect application performance.
2. When referring to hard disk drive capacity, GB equals one billion bytes. Total user accessible capacity may vary depending on operating environments.
3. With a Rack-to-Tower Conversion Kit installed.
Procedure for Server Selection Guidance Chart
File and Print numbers are Novell Netware-based with all others based on Microsoft Windows NT®. Other Network Operating System (NOS) results could vary.
Extensive SAP sizings are available from IBM/SAP Competency Centers. Contact your IBM Marketing Representative for additional information.
Step 1: Determine which application (row) most closely represents the customer’s environment.
Step 2: Move from left to right along the row (chosen in Step 1) noting which columns contain numbers that are equal to or greater than the maximum customer’s planned number of
users.
Step 3: Move up the columns (chosen in Step 2) to the top row to determine which IBM xSeries or Netfinity servers should be considered as possible solutions.
Step 4: Evaluate other features such as storage, memory capacity, high availability components, number of available expansion slots, etc., which are unique to each server, in order to
determine which is the most appropriate to recommend.
For your reference, configuration information corresponding to the number of users is also provided.
8
SERVER SELECTION
GUIDANCE
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
9
IBM xSeries 130/135
)
)
) ax
or
)
ns
)
ail d/M
)
ss
ID
d)
a
v
x
x
r
e
)
A
F
t
a
A
a
R
,
M
l/ S
da
oc
/M
/M
ta e (
a,
IM
DD
Pr
an
td
td
ltr
2
(ToDriv
St
(S
RD
,H
nt ps)
(S
U
,
s
e
s
)
y
l
=
,
s
t
z
y k
r
a
it
m
al
R
lo
Mb
nt
Ba is
MH esso B)
)(
ion age et (
,S
Du
)
il)
ua
ia r d D
pt
n
ax
er
d(
r(
n
c e (K
d
Q
3
a
r
e
O
va vail
e
w
o
M
e
a
(
l
/
e
y
e
r
A
M
l
o
)
r
l
/
h
H
d
M
h
p
y
r
l
P
o
e
P
t
p
E
/A
t
c
l
r
(
c
l
o
a
S
m
f
e
b
p
S
t
a
D
E
t
t
a
l
n
a
(
I
e
o
p
u
n
c
(
t
m
a
d
or
r CC
y
To Tot
ab r n
Fa
ys
Co
rS
wa
ar
nd
ss
(
Nu
or
be
s(
ov te
OM
m
SI
m 2 EC
t-S
du dv S nbo
ce
rt
we
m In
rm
-R
ay lots
e
u
o
e
C
o
a
o
e
o
B
D
r
R
P
N
S
O
P
F
L
H
M
A
R
S
P
C
xSeries 130 At-A-Glance
8654-1YX1, 4
800
1/2
256
256MB(R) / 2GB6
Rack (1U)
1/1
H
-
Y
2 x 10/
100
U160
-
9.1/45.5GB
24X-10X
4/1
2/2
2 x 10/
100
U160
-
9.1/45.5GB
24X-10X
4/1
2/2
xSeries 135 At-A-Glance
8654-1XX1, 5
800
1/2
256
256MB(R) / 2GB6
Rack (1U)
1/1
H
-
N
1. Housed in a 19in rack mountable drawer and ships standard without a keyboard or mouse. See Rack Cabinet and Options section for supported IBM racks.
2. Intel Pentium III processor with advanced transfer (full speed) L2 cache and 133MHz Front-Side Bus (FSB).
3. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
4. A superior Web hosting appliance delivering full X-architecture integration and system management capabilities. Powered by Windows 2000 technology, Microsoft Internet Information
Services, and Web Server Accelerator, the x130 offers the performance and reliability for the most demanding e-business companies.
5. A price/performance Web hosting solution based on Linux and IBM HTTP Server. The x135 is an ideal solution for customers who have chosen the open source architecture and are
seeking the lowest possible price for Web hosting. A key offering for ISPs.
6. Optimum performance occurs with 1GB total memory installed.
xSeries 130 / 135 Processors
Part
Number
10K3810
Processor Upgrades with 256KB Cache
(Full Speed)
SMP
Support1
800MHz Upgrade with 133MHz FSB and 256KB Advanced Transfer Cache Pentium III Processor
1YX, 1XX
1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed, and cache size.
RDIMM 1
Std. RDIMM
RDIMM 2
RDIMM 4
Part
Number
RDIMM 3
xSeries 130 / 135 Memory
Memory Description1
256MB
(1 x 256MB)
Quantity of RDIMMs Added
128MB
(33L3142)
256MB
(33L3144)
512MB
(33L3146)
1GB
(33L3152)
384MB
1
-
-
-
512MB
2 or
1
-
-
640MB
3
-
-
-
768MB
-
2 or
1
-
33L3142
128MB, 133MHz ECC SDRAM RDIMM II
1024MB
-
3
-
-
33L3144
256MB, 133MHz ECC SDRAM RDIMM II
1280MB
-
-
2 or
1
1792MB
-
-
3
-
2048MB2
-
-
4 or
2
33L3146
512MB, 133MHz ECC SDRAM RDIMM II
33L3152
1GB, 133MHz ECC SDRAM RDIMM II
1. Memory RDIMMs must be installed in sequence from RDIMM connector 1
through connector 4. RDIMM size is not relevant.
10
Total
System
Memory1
This table does not represent all possible memory configurations. Memory modules may vary in price
per MB. Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger
RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating
system specifications for further information. Optimum performance occurs with 1GB total memory.
2. Requires removal of standard memory.
Total Int
Storage1
7200RPM HDDs
9.1GB
(37L7201)
9.1GB
IBM XSERIES 130 / 135
xSeries 130 / 135 Hard Disk Drive (HDD) and External Storage
10,000RPM HDDs
18.2GB
36.4GB
9.1GB
18.2GB
36.4GB
(37L7202)
(37L7203)
(P/N 37L204)
(P/N 37L7205)
(P/N 37L7206)
Standard on base models
18.2GB
1
-
-
1
-
-
27.3GB
-
1
-
-
1
-
45.5GB
-
-
1
-
-
1
This table does not represent all possible HDD configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal Storage listed is within +/0.2GB unless otherwise noted.
Floppy / CD-ROM
Bay 1
Bay 2
Bay
Form
Factor
Height
Front
Access
Usage
11
HS
SL
Yes
HDD
2
HS
SL
Yes
Open
1. Boot drive should be located in bay 1.
Updated 03/22/01
Part
Number
Description
RPM
Height
Bays
Supported
Max
Qty
Ultra160 Hard Disk
Drives (HDD)
37L7201
9.1GB Ultra160 SCSI Hot-Swap SL
HDD
7200
SL
1 ... 2
2
37L7202
18.2GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
1 ... 2
2
37L7203
36.4GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
1 ... 2
2
37L7204
9.1GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10000
SL
1 ... 2
2
37L7205
18.2GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10000
SL
1 ... 2
2
37L7206
36.4GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10000
SL
1 ... 2
2
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
11
xSeries 130 / 135 Power, Monitor & Accessories
Part Number
Description
Power1
Uninterruptible Power Supply (UPS)2
94G6674
APC Smart-UPS 1400RMB3
94G6676
APC Smart-UPS 3000RMB3
37L6861
APC Smart-UPS 5000RMB4
06P4792
Cable Chain Technology Cable Kit6
633347N
E51 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black7
6331N2N
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black7
6332J1N
E74 Color Monitor 17in (403mm, 15.9in Viewable Image Size), stealth black7
Monitors5
66274AN
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black7
9511AG1
T54A TFT LCD Color Monitor (306mm x 230mm, 15in Viewable Image Size), stealth black8
37L6888
Netfinity Flat Panel Monitor Rack Mount Kit II
1. The xSeries 130 /135 includes a worldwide, voltage sensing 200W power supply and two 9ft line cords. One line cord contains a 110V
NEMA 5-15P connector while the other contains an IEC 320 C14 for attachment to a high voltage PDU or UPS.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. The xSeries 130 / 135 uses an SVGA controller (S-3 Savage4 chipset) with 8MB of video memory.
6. A Cable Chain Technology Cable Kit(P/N 06P4792) is required for the attachment of console devices to one or multiple chained
xSeries 130 / 135s. The kit contains a 2M (6.5 ft) breakout cable for attachment to a keyboard. mouse and monitor, as well as a 2M
(6.5ft) chaining cable for connecting two xSeries 130 / 135s together when the standard 245mm (9.6in) chaining cable is not long
enough. A maximum of 42 xSeries 130 / 135s are supported in a single chain. No more than one C2T Cable Kit may be used. If the last
server in the chain is connected to a console switch rather than directly to a monitor, a console cable is required
(P/N 09N4293 or 94G7447).
7. Installation within a rack requires optional Monitor Compartment (P/N94G7444).
8. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity Rack Keyboard
Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
Part Number
Description
Keyboard and Mouse1
06P4792
Cable Chain Technology Cable Kit
28L4707
Netfinity Rack Keyboard Tray
28L3644
Space Saver II Keyboard2
28L3621
Preferred Keyboard (stealth black)3
28L3673
Sleek 2-button Stealth Black Mouse
1. A Cable Chain Technology Cable Kit (P/N 06P4792) is required for the attachment of console devices to one or multiple chained
xSeries 130 / 135s. The kit contains a 2M (6.5ft) breakout cable for attachment to a keyboard. mouse and monitor, as well as a
2M (6.5ft) chaining cable for connecting two xSeries 130s or 135s together when the standard 245mm (9.6in) chaining cable is not long
enough. A maximum of 42 xSeries 130s or 135s are supported in a single chain. No more than one C2T cable kit may be used. If the
last server in the chain is connected to a console switch rather than directly to a monitor, a console cable is required
(P/N 09N4293 or 94G7447).
2. Installation within a rack requires optional keyboard tray P/N 28L4707 which stows in ready-to-use position).
3. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a keyboard tray with a flat panel
display.
12
IBM XSERIES 130 / 135
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
13
IBM xSeries 200
)
s)
)
or
)
ail ax)
ID
ss
an
d)
ax D, F
ce
ar
RA
/Av d/M
l
o
d
M
,
/
a
r
n
a
t
)
St
td , HD
ta nt P
ltr
Hz
)
(
D
(To e (
(S
s
,S
e
(M
ps al, U
rs
=R
ys Driv
al
ity Slot
m
b
o
d
R
t
a
n
e
(
s
u
)
B
g
(M (D
)
io
ee
an
)
r,
)
es (KB
ia isk
na
pt
et
r
ax
Sp
ail
ail
Qu owe
oc
ed rd D
(O
/M
)
Ma hern rolle
r
or
Av l/Av
ly
Pr che
d
P
/
M
y
E
r
s
l
e
(
t
p
f
a
o
t
b
p
S
p
le H
nc
ta ota
em
es
nt
(ID
ct
Ca
ro
y(
Su wa
st
d E Co
ab al
To
um
da
oc
(T
Fa
be C C
or
OM
I
ar
ov ern
er
s ( ts
un v Sy
Pr
tN
t-S
m
m
o
S
R
E
m
y
d
r
w
m
r
o
o
u
t
b
e
C
a
l
e In
D
n
H
N
S
B
S
Pa
Re
Ad
L2
M
Fo
Po
R
C
O
)
ax
d/M
t
S
M)
IM
xSeries 200 At-A-Glance
8478-10X
6671
8478-11X
1
667
1/1
128
64MB/1.5GB
Tower
1/1
-
-
-
10/100
IDE
8478-12X4
6671
1/1
128
64MB/1.5GB
Tower
1/1
-
-
-
10/100
IDE
5
1
667
1/1
128
128MB/1.5GB
Tower
1/1
-
-
-
10/100
8478-20X
7331
1/1
128
128MB/1.5GB
Tower
1/1
-
-
-
10/100
8478-21X
7331
1/1
128
64MB/1.5GB
Tower
1/1
-
-
-
8478-22X
1
1/1
128
64MB/1.5GB
Tower
1/1
-
-
-
8478-13X
5
1/1
733
128
128MB/1.5GB
Tower
1/1
-
-
-
10/100
U160
4/2
0/145.6GB
48X-20X
7/5
5/4
48X-20X
7/4
5/5
48X-20X
7/34
5/5
4/2
15/90GB
2, 3
4/1
15/90GB2, 3
U160
4/2
2
9.1/145.6GB
48X-20X
7/4
5/4
U160
4/2
0/145.6GB
48X-20X
7/5
5/4
10/100
IDE
4/2
20.4/145.6GB2, 3 48X-20X
7/4
5/5
10/100
IDE
4/1
20.4/145.6GB2, 3 48X-20X
7/34
5/5
8478-23X
1
733
1/1
128
128MB/1.5GB
Tower
1/1
-
-
-
10/100
U160
4/2
18.2/145.6GB
48X-20X
7/4
5/4
8478-40X
8006
1/1
256
128MB/1.5GB
Tower
1/1
-
-
-
10/100
U160
4/2
0/145.6GB
48X-20X
7/5
5/4
8478-41X
8006
1/1
256
64MB/1.5GB
Tower
1/1
-
-
-
10/100
IDE
4/2
15/90GB2, 3
48X-20X
7/4
5/5
6
1/1
256
128MB/1.5GB
Tower
1/1
-
-
-
10/100
U160
4/2
9.1/145.6GB2
48X-20X
7/4
5/4
8478-50X
6
866
1/1
256
128MB/1.5GB
Tower
1/1
-
-
-
10/100
U160
4/2
0/145.6GB
48X-20X
7/5
5/4
8478-51X
8666
1/1
256
64MB/1.5GB
Tower
1/1
-
-
-
10/100
IDE
4/2
15/90GB2, 3
48X-20X
7/4
5/5
2
8478-42X
5
5
800
2
8478-52X
6
866
1/1
256
128MB/1.5GB
Tower
1/1
-
-
-
10/100
U160
4/2
9.1/145.6GB
48X-20X
7/4
5/4
8478-60X
9336
1/1
256
128MB/1.5GB
Tower
1/1
-
-
-
10/100
U160
4/2
0/145.6GB
48X-20X
7/5
5/4
8478-61X
9336
1/1
256
64MB/1.5GB
Tower
1/1
-
-
-
10/100
IDE
4/2
20.4/145.6GB2, 3 48X-20X
6
1/1
256
128MB/1.5GB
Tower
1/1
-
-
-
10/100
U160
4/2
8478-62X
5
933
8478-70X
1GHz
6
1/1
256
128MB/1.5GB
Tower
1/1
-
-
-
10/100
U160
4/2
8478-71X
1GHz6
1/1
256
64MB/1.5GB
Tower
1/1
-
-
-
10/100
IDE
4/2
5
8478-72X
1GHz
6
1/1
256
64MB/1.5GB
Tower
1/1
-
-
-
10/100
U160
4/2
7/4
5/5
18.2/145.6GB2
48X-20X
7/4
5/4
0/145.6GB
48X-20X
7/5
5/4
20.4/145.6GB2, 3 48X-20X
7/4
5/5
7/4
5/4
2
18.2/145.6GB
48X-20X
1. Intel® Celeron™ processor.
2. Maximum capacity assumes replacement of standard hard disk drives and tape drives with the largest supported IBM hard disk drive.
3. Maximum capacity may be increased by converting IDE models to support SCSI devices and replacing IDE devices with the largest supported IBM hard disk drives.
4. This model is configured with an IBM 10/20GB TR5 Internal IDE Tape Drive (P/N 20L0549).
5. Not available in the United States.
6. Intel Pentium III processor with advanced transfer (full speed) L2 cache and 133MHz front-side bus (FSB).
xSeries 200 Processors
Part
Number
Processor Upgrades
Processor Speed
Upgrade1
21P9539
800MHz Upgrade with 133MHz FSB and 256KB Advanced Transfer Cache Pentium III
Processor
1xX
10K3818
866MHz Upgrade with 133MHz FSB and 256KB Advanced Transfer Cache Pentium III
Processor
1 ... 4xX
10K0051
xSeries 1GHz Upgrade with 133MHz FSB 256KB Advanced Transfer Cache Pentium III
Processor
4 ... 7xX
1.Requires removal of the standard processor. A maximum of one processor may be installed. Upgrades may require a BIOS update. To obtain the latest Flash BIOS,
access www.pc.ibm.com/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” then “BIOS.”
14
xSeries 200 Memory
Total System
Memory (Standard
Models)1
64MB
(1 x 64)
DIMM Socket
DIMM Socket
Part
Number
Memory Description
128MB
(1 x 128)
64MB
128MB
256MB
512MB
(33L3079) (33L3081) (33L3083) (33L3085)
128MB
192MB
1
192MB
256MB
2 or
1
320MB
384MB
-
2 or
384MB2
-
1
3
33L3079
64MB 133MHz ECC SDRAM DIMM Memory
576MB
640MB
2 or
33L3081
128MB 133MHz ECC SDRAM DIMM Memory
768MB2
768MB2
3
33L3083
256MB 133MHz ECC SDRAM DIMM Memory
1088MB
1152MB
33L3085
512MB 133MHz ECC SDRAM Unbuffered
DIMM Memory
1536MB
(max)2
1
2
2
1536MB
3
This table does not represent all possible memory configurations. Memory modules may vary in price per
MB. Selection of smaller DIMMs may provide a more cost-effective alternative to using larger DIMMs. Select
the desired total memory from the appropriate column (Standard Model 64MB or 128MB), then select a
quantity in that row from one of the DIMM columns.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating
system specifications for further information.
2. Requires removal of standard DIMMs.
xSeries 200 Hard Disk Drive (HDD)
Total
Internal
Storage1
7200RPM SCSI HDDs
10,000RPM SCSI HDDs
15,000RPM
SCSI HDDs
9.1GB
18.2GB
36.4GB
9.1GB
18.2GB
36.4GB
18.2GB
(00N8204)
(00N8205)
(00N8206)
(00N8207)
(00N8208)
(00N8209)
(19K0658)
0GB
Standard on some base models
9.1GB
1 (Std on some models)
-
-
1
-
-
-
18.2GB
2
1
-
2
1
-
1
27.3GB
3
-
-
3
-
-
-
36.4GB
4
2
1
4
2
1
2
54.6GB
-
3
-
-
3
-
3
72.8GB
-
4
2
-
4
2
4
109.2GB
-
-
3
-
-
3
-
145.6GB
(max)
-
-
4
-
-
4
-
This table does not represent all possible hard disk drive (HDD) configurations.
1. Select a total storage row and select the quantity of HDDs from a column corresponding
to the hard disk drive of choice. Total Internal Storage listed is within +/- 0.2GB unless
otherwise noted.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
15
IBM XSERIES 200
DIMM Socket
DIMMs
CD-ROM
Bay 2
Diskette
Bay 4
Bay 5
Bay 6
Bay 7
7200RPM IDE HDDs2
Total
Internal
Storage1
15GB
(P/N 19K4460)
20.4GB
(P/N 19K4461)
30GB
(P/N 00N8203)
15GB
(Std on EIDE models)
-
-
30GB
1
-
-
35.4GB
-
1
-
45GB
-
-
1
45GB3
2
-
-
50.4GB3
1
1
-
55.8GB3
-
2
-
60GB3
1
-
1
61.2GB3
-
34
-
65.4GB3
-
1
1
75GB3
-
-
2
90GB (max)
-
--
34
This table does not represent all possible HDD configurations.Total Internal Storage listed is within +/-0.2GB
unless otherwise noted.
1. Select a total storage row then select the quantity of HDDs from all columns. Example: Total storage =
50.4GB, order 1 x 19K4460 and 1 x 19K4461.
2. The xSeries 200 EIDE controllers support a maximum of four IDE devices per machine including cd-rom
drives, HDDs and IDE tape drives.
3. Not a supported configuration on model12X which includes an IBM 10/20GB TR5 Internal IDE Tape Drive (P/
N 20L0549).
4. Requires removal of the standard HDD.
Bay
Form
Factor
Height
Front
Access
Usage
Part
Number
Description
RPM Height
Bays
Max
Supported Qty
IDE HDDs1, 2
1
133mm
(5.25in)
HH
yes
IDE CDROM
2
133mm
(5.25in)
HH
yes
open1, 2
19K4460
15GB 7200rpm ATA-100 (EIDE) HDD
7200
SL
4 ... 7
33
3
89mm
(3.5in)
SL
yes
Diskette
19K4461
20.4GB 7200rpm ATA-100 (EIDE) HDD
7200
SL
4 ... 7
33
4
89mm
(3.5in)
SL
yes
open
00N8203
30GB 7200rpm ATA-100 (EIDE) HDD
7200
SL
4 ... 7
33
5...7
89mm
(3.5in)
SL
yes
open
4
1. Supports removable media devices only. Hard drives are not
supported.
2. Tape drive in model 8478-12X.
Ultra160 HDDs2
00N8204
9.1GB 7200rpm Ultra160 SCSI HDD
7200
SL
4 ... 7
00N8205
18.2GB 7200rpm Ultra160 SCSI HDD
7200
SL
4 ... 7
4
00N8206
36.4GB 7200rpm Ultra160 SCSI HDD
7200
SL
4 ... 7
4
00N8207
9.1GB 10,000rpm Ultra160 SCSI HDD
10,000
SL
4 ... 7
4
00N8208
18.2GB 10,000rpm Ultra160 SCSI HDD
10,000
SL
4 ... 7
4
00N8209
36.4GB 10,000rpm Ultra160 SCSI HDD
10,000
SL
4 ... 7
4
19K0658
18.2GB 15,000rpm Ultra160 SCSI HDD
15000
SL
4 ... 7
4
35311RU
EXP300 Storage Expansion Unit5
09N7296
EXP300 Rack-to-Tower Conversion Kit
External Storage Expansion Units4
Form Factor
Rack (3U)
-
1.The xSeries 200 EIDE controllers support a maximum of four IDE devices per machine including CD-ROM drives,
HDDs and IDE tape drives.
2. Mixing of IDE and SCSI HDDs is not supported.
3. Limited to two drives in model -12X due to installed tape drive option.
4. Not supported by the external SCSI port included in SCSI models. Select an optional SCSI controller then refer to
Appendix D: Cables - Storage Unit - Controllers to confirm the controller supports the desired External Storage
Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion
unit section.
5. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each with its
own power cord. To convert an EXP300 to a tower form factor, EXP300 Rack-to-Tower Conversion Kit (P/N 09N7296) is
required.
16
xSeries 200 Internal SCSI Cabling
EIDE Models
In xSeries 200 models using the EIDE interface for storage device attachment, a two-drop cable is used to attach the standard15GB EIDE HDD to one of the EIDE
connectors. A second EIDE controller provides the interface for the IDE CD-ROM drive. A two-drop cable connects the IDE controller to the IDE CD-ROM. Up to two
additional EIDE or IDE devices can be installed (one off of each controller).
SCSI Models
xSeries 200 models with a SCSI adapter are cabled internally with a five-drop, 16-bit wide LVD SCSI cable with a built-in multi-mode active terminator at one end of
the cable. The other end of the cable is attached to the internal 68-pin connector of the standard Ultra160 SCSI adapter. SCSI devices can be connected to any of
the five cable connectors. If 8-bit (narrow) devices are to be installed, a 68- to 50-pin converter (32G3925) is required for each narrow device.
Other Configuration Alternatives
In the case where a RAID controller is used to support internal drives in a xSeries 200, the standard cable is moved from the onboard controller to the RAID adapter.
To connect a tape drive to the onboard or other supported SCSI controller, use the 16-bit multi-mode terminated, two-drop SCSI cable included with optional Media
Bay Tray and LVD Cable Kit (P/N 10K2340).
IBM XSERIES 200
External SCSI support can be obtained by installing an optional SCSI adapter or RAID controller and using appropriate external SCSI cabling.
xSeries 200 I/O Options
Part
Number
Description
Adapter
Length
PCI
Support
Slots
Supported1
Full
32/64-bit
2 ... 5
Storage Controllers2, 3
37L6091
ServeRAID-4L Ultra160 SCSI Controller4
-
ServeRAID-4M Ultra160 SCSI Controller5
Full
32/64-bit
2 ... 5
PCI Wide Ultra160 SCSI Adapter6
Half
32-bit
2 ... 5
02K3454
PCI Fast/Wide Ultra SCSI Adapter
Half
32-bit
2 ... 5
1 ... 5
Token-Ring 16/4 PCI Adapter 2 with Wake on LAN
Half
32-bit
16/4 Token-Ring PCI Management Adapter
Half
32-bit
1 ... 5
34L5201
High-Speed 100/16/4 Token-Ring PCI Management Adapter
Half
32-bit
1 ... 5
External Connector Access
Networking7
Ethernet
09N9901
10/100 EtherLink Server Adapter by 3Com
Half
32-bit
19K4401
Netfinity Gigabit Ethernet Adapter (copper)
Half
32/64-bit
1 ... 5
34L4601
Netfinity 10/100 Ethernet Security Adapter
Half
32/64-bit
1 ... 5
06P3601
10/100 Ethernet Server Adapter
Half
32-bit
1 ... 5
06P3701
Gigabit Ethernet SX Server Adapter (fiber)
Half
32/64-bit
1 ... 5
1 ... 5
Token Ring8
Communications
All Slots-Full Length
34L0701
34L5001
Slot 1- 33MHz, 32-bit, 5V or Universal
Slot 2- 33MHz, 32-bit, 5V or Universal
Slot 3- 33MHz, 32-bit, 5V or Universal
Slot 4- 33MHz, 32-bit, 5V or Universal
Slot 5- 33MHz, 32-bit, 5V or Universal
37L6080
19K4646
9
33L4618
PCI V.90 56 Data/Fax Modem
Half
32-bit
2 ... 5
37L14xx
Serial I/O SST 8, 16 and 128 Port Adapters10
Half
32-bit
2 ... 5
1. The xSeries 200 has five full-length, 33MHz PCI expansion slots. The number of available slots is model specific.
2. Some models of the xSeries 200 include a single channel Ultra160 SCSI Adapter with a five-drop multi-mode terminated LVD SCSI Cable. All other models include dual-channel EIDE
controllers and require an optional SCSI adapter for SCSI functionality. See At-A-Glance for model attributes
3. Storage controllers are supported in slots two through five only. Slots two and four and slots three and five are paired so that they support only the same type of adapter, e.g., if a storage
controller is installed in slot two, only another storage controller can be installed in slot four. Thus, a networking adapter cannot be installed in slot four when a storage controller is installed in
slot two. (Slot one is next to the AGP video adapter, and slot five is the farthest from the processors.)
4. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides a single channel, 16MB of ECC cache and either one internal or one external Ultra160
connection. External connector is 0.8mm VHDCI.
5. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides two channels, 64MB of battery-backed ECC cache and two external 0.8mm VHDCI
Ultra160 connectors.
6. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector
with a 0.8mm VHDCI connector. Only one of the two connectors may be utilized.
7. xSeries 200 includes an integrated full-duplex, 10/100Mbps Ethernet controller. Networking adapters are supported in slots one through five; Slots two and four and slots three and five are
paired so that they support only the same type of adapter, e.g., if a networking adapter is installed in slot three, only another networking adapter can be installed in slot five. Thus, a storage
controller cannot be installed in slot five when a networking adapter is installed in slot three.
8. Wake on LAN™ is supported for networking adapters designed with this function when installed in slots one through five (refer to limitation explained in footnotes three and seven).
9. xSeries 200 includes two USB ports, two high-speed serial/asynchronous ports (NS16550A software compatible) and one high-speed parallel port supporting devices using
SSP/EPP/ECP protocols adhering to the IEEE 1284 Standard.7.
10. See Appendix E for details on Serial I/O options and configuration limitations.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
17
xSeries 200 Power, Monitor & Accessories
Part Number
Description
Power1
Free Standing Uninterruptible Power Supply (UPS)2
94G3134
APC Smart-UPS 700
94G3135
APC Smart-UPS 1000
94G3136
APC Smart-UPS 1400
94G6674
APC Smart-UPS 1400RMB3
94G6676
APC Smart-UPS 3000RMB3
37L6861
APC Smart-UPS 5000RMB4
633347N
E51 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6331N2N
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6332J1N
E74 Color Monitor 17in (403mm, 15.9in Viewable Image Size), stealth black6
66274AN
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black6
Rack Mount Uninterruptible Power Supply (UPS)2
Monitors5
9511AG1
T54A TFT LCD Color Monitor (306mm x 230mm, 15in Viewable Image Size), stealth black7
37L6888
Netfinity Flat Panel Monitor Rack Mount Kit II
1. The xSeries 200 includes a 330W voltage sensing power supply and a single line cord..
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. The xSeries 200 contains a S-3 Savage-4 LT video adapter with 8MB of video memory plugged into the standard AGP slot.
6. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity Rack Keyboard
Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
Part Number
Description
Conversion Kits
09N4300
4Ux20D Tower-to-Rack Kit
930842P
Netfinity Enterprise Rack
Rack and NetBAY1
930842X
Netfinity Enterprise Expansion Cabinet
9306900
Netfinity Rack
9306910
Netfinity Rack (Perforated Doors)
36L9703
Netfinity Rack Extension Kit
9306200
Netfinity NetBAY22
36L9702
NetBAY22 Rack Extension Kit
Keyboard and Mouse2
Keyboard3, 4
28L3644
Space Saver II
01K1260
TrackPoint IV 104-key Black Keyboard4, 5
28L3621
Preferred Keyboard (stealth black)5
28L3673
Sleek 2-button Stealth Black Mouse
1 Rack installation of an xSeries 200 requires 4Ux20D Tower-to-Rack Kit (P/N 09N4300) and one of the racks listed here. See Rack
Cabinet and Options section for IBM rack supported devices.
2. The xSeries 200 includes both a mouse and nonspace saver keyboard.
3. Installation within a rack requires optional keyboard tray (P/N 28L4707) (stows in “ready-to-use” position).
4. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
5. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat panel
display.
18
xSeries 200 Tape Options
Bays
SCSI
Supported Interface
(bit)
Tape Drives
20L0549
10/20GB TR5 Internal IDE Tape Drive2
09N4041
12/24GB DDS/3 4mm Internal SCSI
Tape Drive3, 4
09N4042
10/20GB NS Internal SCSI Tape Drive3, 4
00N7991
20/40 GB DDS/4 4mm Internal Tape
Drive4, 5
00N8016
100/200GB LTO Tape Drive
Form
Factor
Termination 68/50-pin
Ext Tape
Included
Converter Enclosures1
Incl
2, 4
-
89mm
(3.5in) SL or
133mm
(5.25in) HH
-
-
-
2
8
89mm
(3.5in) HH
or 133mm
(5.25in) HH
Y
Y
3510020, 3551001
2, 4
8
89mm
(3.5in) SL or
133mm
(5.25in) HH
Y
Y
3510020, 3551001
2
16 Ultra2 LVD
89mm
(3.5in) HH
or 133mm
(5.25in) HH
N
N/A
35100206,
35510017
N/A
16 Ultra2 LVD
133mm
(5.25in) FH
N
N/A
35510017
-
IBM XSERIES 200
Part
Number
External Tape Enclosures
3510020
External Half High SCSI Storage Enclosure8
-
8, 16
Desktop
N
N
3551001
NetMEDIA Storage Expansion Unit EL9
-
16
Rack
Y
N
-
10L7113
NetMEDIA Systems Management Adapter10
-
16 LVD
-
N
N
3551001
-
16 LVD/SE
External
Y
N
3510020
-
16 LVD
Internal
Y
N
3551001
Associated Options
00N7956
10K2340
68-pin External Multimode LVD/SE SCSI
Terminator
Media Bay Tray and LVD Cable Kit
4, 7
Note: SCSI models include an Ultra160 SCSI controller with a five-drop multi-mode terminated LVD SCSI cable. Single-ended devices attached to this cable will limit the entire SCSI bus to
single-ended performance. SCSI tape drives and external tape enclosures are supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which includes a five-drop multi-mode LVD
SCSI cable and an external 0.8-mm VHDCI connector.
1. To determine cable requirements, note the tape drive’s SCSI interface, the appropriate SCSI controller from the system configurator section, and the desired enclosure, then refer to
Appendix D: Cables - Storage Units - Controllers.
2. SCSI models include a two-drop EIDE cable for attachment to the CD-ROM and an IDE tape drive. Model 8478-12X and 22X include 10/20GB TR5 Internal IDE Tape Drive (P/N
20L0549).
3.This single-ended device will limit the SCSI bus to which it is attached to Ultra SCSI speeds. To provide a dedicated tape SCSI bus, install PCI Wide Ultra160 SCSI Adapter (P/N
19K4646) which includes a five-drop multi-mode LVD SCSI cable.
4. RAID configurations (SCSI models only) where the standard SCSI cable is attached to a RAID adapter require the two-drop multi-mode terminated LVD SCSI cable included with Media
Bay Tray and LVD Cable Kit (P/N 10K2340).
5. EIDE models require optional PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which includes a five-drop multi-mode LVD SCSI cable.
6. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956)
7. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) requires replacement of the standard single-ended internal cables with one or more
(depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340), which contains a single two-drop mult-mode terminated LVD cable. If the standard cables are
used for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
8. Provides a black desktop 133mm (5.25in) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination
or 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
9. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, 19in rack mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133mm
(5.25in) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two
power cords are also included. Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a 930842x rack.
10. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a 3551001 to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters when
attached to an LVD SCSI controller, and auto-termination when the 3551001 is powered off. External connector is 0.8mm VHDCI.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
19
xSeries 200 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or
IBM Marketing Representative for assistance with your specific configuration requirements.
Internet Server
Part Number
8478-12X
33L3081
19K4461
6331N2N
94G3134
Description
Quantity
x200 Celeron 667/128, 64MB, EIDE, 15GB, Tape, 48X
128MB 133Mhz ECC SDRAM DIMM Memory
20.4GB 7200rpm ATA/100 (EIDE) HDD
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
APC Smart-UPS 700
1
11
12
1
1
1. For a total of 192MB of system memory.
2. For a total of 35.4GB of internal storage.
An Internet server handles all requests from the Internet (Intranet or Extranet). Usually, this type of server has the same characteristics as a normal file server. The
main difference is that an Internet server talks a different language (TCP/IP vs NETBEUI or IPX/SPX) and often needs to do an extra security check (firewall). In the
case of an Internet server, the server itself talks mostly to one client, the Internet Service Provider (ISP), instead of many clients as a file server does.
With this is mind, the xSeries 200 was selected to provide an affordable price point for the growing Internet server market with two-way Pentium III processing, 192MB
of system memory (expandable to 1.5GB), and power protection with an APC Smart-UPS.
The network configuration depends on the method that will be used to connect the server to the Internet. Usually fast Ethernet routers are used, but if other methods
are used you can add the appropriate adapter. The configuration includes a tape backup unit for secure backup of critical data in the event of a system or storage
failure.
File and Print Server
Part Number
8478-50X
33L3081
00N8208
00N7991
6331N2N
94G3134
Description
x200 Pentium III 866/256, 128MB, Ultra160, Open, 48X
128MB 133MHz ECC SDRAM DIMM Memory
18.2GB 10,000RPM Ultra160 SCSI HDD
20/40GB DDS/4 4mm Internal Tape Drive
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth
black
APC Smart-UPS 700
Quantity
1
11
32
1
1
1
1. For a total of 256MB of system memory.
2. For a total of 54.6GB of internal storage.
A small business or departmental server is usually required to perform all typical server functions while servicing up to 100 users in a normal workgroup computing
environment, but doesn’t require the high-end performance and fault-tolerance properties of larger servers.
The sample configuration above consists of an xSeries 200 with 256MB of memory and 54.6GB of hard disk drive space. It has enough processor power and
memory to run most current network operating systems comfortably and enough hard disk drive space to store a significant amount of data with additional external
storage expansion still available. Demanding network traffic is effectively handled by the standard 100Mbps Ethernet connection.
This configuration also includes a tape backup unit, monitor, and a UPS to keep the system protected during power surges and outages.
Application Server
Part Number
8478-40X
33L3083
37L6091
00N8207
10K2340
09N4042
6331N2N
94G3134
Description
x200 Pentium III 800/256, 128MB, Ultra160, Open, 48X
256MB 133MHz ECC SDRAM DIMM Memory
ServeRAID-4L Ultra160 SCSI Controller
9.1GB 10,000rpm Ultra160 SCSI HDD
Media Bay Tray and LVD Cable Kit3
10/20GB NS Internal SCSI Tape Drive
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
APC Smart-UPS 700
Quantity
1
11
1
32
1
1
1
1
1. For a total of 384MB of system memory.
2. Three HDDs are used for RAID 5 protection. Effective capacity is two HDDs or 18.2GB.
3. Cable for dedicated attachment of tape to standard controller.
An application server differs from a file and print server in that it has a higher workload in providing application serving requirements for users. With this in mind, the
xSeries 200 was selected to provide an affordable price point for an application server with Pentium III processing, 384MB of system memory (expandable to 1.5GB),
and availability features such as RAID-protected internal storage and power protection with an APC Smart-UPS.
20
IBM XSERIES 200
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
21
IBM xSeries 220
)
s)
)
or
)
)
ail ax)
ID
an
ss
d)
ax
ax D, F
ce
ar
RA
/Av d/M
)
l
M
o
d
M
,
/
/
M
a
r
n
a
t
d
)
St
td , HD
IM
ta nt P
ltr
St
)
(To e (
(S
Hz
s
,S
RD
e
s(
ps
l, U ays riv
(M
al
ity Slot
m
b
a
or )
R=
t
n
D
e
d
(
s
u
B
g
(M
e
s
)
io
D
an
)
r,
)
ia isk
KB
pt
na
pe
ce
r(
et
ax
ail
ail
Qu owe
2
ed r d D
r o he (
(O
/M
rS
Ma hern rolle
r
Av l/Av
ly
)
P
d
P
/
M
y
r
o
l
e
(
t
p
c
E
f
a
o
t
t
b
p
S
p
le H
ss
nc
ta ota
em
ct
Ca
ro
(ID
on
y(
Su wa
st
dE
To
ab al
um
ce
da
(T
Fa
be C C
or
IC
ar
ro
ov ern
er
s ( ts
un v Sy
OM
tN
t-S
m
m
o
S
E
P
m
y
d
r
w
m
r
R
o
o
u
t
b
e
a
C
l
e In
n
H
N
S
B
S
D
Re
Pa
Ad
L2
M
Fo
Po
R
O
C
1
xSeries 220 At-A-Glance
8645-21X
800
1/2
256
128MB(R)/4GB
Tower
1/1
-
-
-
10/100
U160
4/2
0/145.6GB
48X-20X
7/5
5/5
8645-22X
800
1/2
256
128MB(R)/4GB
Tower
1/1
-
-
-
10/100
U160
4/2
18.2/145.6GB
48X-20X
7/4
5/5
8645-2AX
800
1/2
256
128MB(R)/4GB
Tower
1/1
H
-
-
10/100
U160
4/2
0/145.6GB
48X-20X
7/5
5/5
8645-31X
866
1/2
256
128MB(R)/4GB
Tower
1/1
-
-
-
10/100
U160
4/2
0/145.6GB
48X-20X
7/5
5/5
8645-32X
866
1/2
256
128MB(R)/4GB
Tower
1/1
-
-
-
10/100
U160
4/2
18.2/145.6GB
48X-20X
7/4
5/5
8645-3AX
866
1/2
256
128MB(R)/4GB
Tower
1/1
H
-
-
10/100
U160
4/2
0/145.6GB
48X-20X
7/5
5/5
8645-41X
933
1/2
256
128MB(R)/4GB
Tower
1/1
-
-
-
10/100
U160
4/2
0/145.6GB
48X-20X
7/5
5/5
8645-42X
933
1/2
256
128MB(R)/4GB
Tower
1/1
-
-
-
10/100
U160
4/2
18.2/145.6GB
48X-20X
7/4
5/5
8645-4AX
933
1/2
256
128MB(R)/4GB
Tower
1/1
H
-
-
10/100
U160
4/2
0/145.6GB
48X-20X
7/5
5/5
8645-51X
1GHz
1/2
256
128MB(R)/4GB
Tower
1/1
-
-
-
10/100
U160
4/2
0/145.6GB
48X-20X
7/5
5/5
8645-52X
1GHz
1/2
256
128MB(R)/4GB
Tower
1/1
-
-
-
10/100
U160
4/2
18.2/145.6GB
48X-20X
7/4
5/5
8645-5AX
1GHz
1/2
256
128MB(R)/4GB
Tower
1/1
H
-
-
10/100
U160
4/2
0/145.6GB
48X-20X
7/5
5/5
1. Intel Pentium III processor with advanced transfer (full speed) L2 cache and 133MHz Front-Side Bus.
2. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
xSeries 220 Processor Upgrades
Part
Number
Processor Upgrades
SMP Support1
Processor Speed
Upgrade2
21P9539
800MHz Upgrade with 133MHz FSB and 256KB Advanced Transfer Cache Pentium III
Processor
2xX
-
10K3818
Netfinity 866MHz with 133MHz FSB and 256KB Advanced Transfer Cache Pentium III
Upgrade Processor
3xX
2xX
10K3819
Netfinity 933MHz with 133MHz FSB and 256KB Advanced Transfer Cache Pentium III
Upgrade Processor
4xX
2 ... 3xX
10K0051
xSeries 1GHz Upgrade with 133MHz FSB 256KB Advanced Transfer Cache Pentium III
Processor
5xX
2 ... 4xX
1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of one processor may be installed. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access
www.pc.ibm.com/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
xSeries 220 Memory
DIMM Socket
DIMM Socket
Part
Number
22
Total
System
Memory1
Quantity of RDIMMs Added
128MB
(1 x 128)
128MB
256MB
512MB
1GB
(33L3142) (33L3144) (33L3146) (33L3152)
DIMM Socket
256MB
1
-
-
-
DIMM Socket
384MB
2 or
1
-
-
512MB
3
-
-
-
640MB
-
2 or
1
-
Memory Description
33L3142
128MB 133MHz SDRAM ECC RDIMM
Memory
896MB
-
3
-
-
33L3144
256MB 133MHz SDRAM ECC RDIMM
Memory
1024MB2
-
4
-
-
33L3146
512MB 133MHz SDRAM ECC RDIMM
Memory
33L3152
1GB 133MHz SDRAM ECC RDIMM
1152MB
-
2 or
1
1664MB
-
3
-
2048MB2
-
4
-
2176MB
-
-
2
3200MB
-
-
3
4096MB2
(max)
-
-
4
This table does not represent all possible memory configurations. Memory modules may
vary in price per MB. Selection of smaller DIMMs may provide a more cost-effective
alternative to using larger DIMMs. Select the desired total memory from the appropriate
column (Standard Model 64MB or 128MB), then select a quantity in that row from one of
the DIMM columns.
1. Network Operating Systems may limit the maximum amount of addressable memory.
See operating system specifications for further information.
2. Requires removal of standard memory.
xSeries 220 Hard Disk Drive (HDD) and External Storage
Total
Internal
Storage1
7200RPM HDDs
9.1GB
(00N8204
or
37L7201)2
18.2GB
(00N8205
or
37L7202)2
10,000RPM HDDs
36.4GB
(00N8206
or
37L7203)2
9.1GB
(00N8207
or
37L7204)2
18.2GB
(00N8208
or
37L7205)2
15,000RPM HDDs
36.4GB
(00N8209
or
37L7206)2
9.1GB
(19K0655)
18.2GB
(19K0658
or
19K0656)2
4
9.1GB
1
-
-
1
-
-
1
-
18.2GB
2
1
-
2
1
-
2
1
27.3GB
3
-
-
3
-
-
3
-
36.4GB
43
2
1
43
2
1
-
2
45.5GB
-
-
-
-
-
-
-
-
54.6GB
-
3
-
-
3
-
-
3
72.8GB
-
43
2
-
43
2
-
43
91GB
-
-
-
-
-
-
-
-
109.2GB
-
-
3
-
-
3
-
-
145.6GB
(max)
-
-
43
-
-
43
-
-
This table does not represent all possible HDD configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal Storage listed is within +/- 0.2 GB unless otherwise noted.
2. Both hot-swap and nonhot-swap HDDs are listed. Select the appropriate part number for the model of xSeries 220 being configured.
3. A maximum of three hot-swap drives may be installed in hot-swap models. This configuration requires installation of a nonhot-swap HDD in Bay 4.
4. Hot-Swap models only.
5. Models 8645-22X, 32X and 42X ship standard with an 18.2GB Ultra160 SCSI HDD.
Hot-Swap Models
Part
Number
Description
RPM Height
Bays
Supported
Maximum
Quantity
Non-Hot-Swap Models
Bays
Supported
Maximum
Quantity
Non-Hot-Swap Ultra160 Hard Disk
Drives (HDD)1
00N8204
9.1GB 7200rpm Ultra160 SCSI HDD
7200
SL
4
1
4 ... 7
4
00N8205
18.2GB 7200rpm Ultra160 SCSI HDD
7200
SL
4
1
4 ... 7
4
00N8206
36.4GB 7200rpm Ultra160 SCSI HDD
7200
SL
4
1
4 ... 7
4
00N8207
9.1GB 10,000rpm Ultra160 SCSI HDD
10,000
SL
4
1
4 ... 7
4
00N8208
18.2GB 10,000rpm Ultra160 SCSI HDD
10,000
SL
4
1
4 ... 7
4
00N8209
36.4GB 10,000rpm Ultra160 SCSI HDD
10,000
SL
4
1
4 ... 7
4
19K0658
18.2GB 15,000rpm Ulltra160 SCSI HDD
15000
SL
4
1
4 ... 7
4
Hot-Swap Ultra160 HDDs2
37L7201
9.1GB Ultra160 SCSI Hot-Swap SL HDD
7200
SL
5 ... 7
3
-
-
37L7202
18.2GB Ultra160 SCSI Hot-Swap SL HDD
7200
SL
5 ... 7
3
-
-
37L7203
36.4GB Ultra160 SCSI Hot-Swap SL HDD
37L7204
9.1GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
7200
SL
5 ... 7
3
-
-
10,000
SL
5 ... 7
3
-
-
37L7205
18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
10,000
SL
5 ... 7
3
-
37L7206
36.4GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
10,000
SL
5 ... 7
3
-
-
19K0655
9.1GB 15K-rpm Ultra160 SCSI Hot-Swap HDD
15000
SL
5 ... 7
3
-
-
19K0656
18.2GB 15K-rpm Ultra160 SCSI Hot-Swap HDD
15000
SL
5 ... 7
3
-
-
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
23
IBM XSERIES 220
Standard on base models5
0GB
External Storage Expansion Units3
35311RU
EXP300 Storage Expansion Unit4
09N7296
EXP300 Rack-to-Tower Conversion Kit
Form Factor
Rack (3U)
-
1. Nonhot-swap HDDs are supported in bays four through seven of nonhot swap models and in bay four of hot-swap
models.
2. Hot-swap HDDs are supported in bays five through seven of hot-swap models. Bay four supports nonhot-swap
HDDs only.
3. Not supported by the onboard SCSI controller. Select an optional SCSI controller then refer to Appendix D: Cables
- Storage Units - Controllers to confirm the controller supports the desired External Storage Expansion Unit and to
select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
4. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each with its
own power cord. To convert an EXP300 to a tower form factor, EXP300 Rack-to-Tower Conversion Kit (P/N 09N7296)
is required.
Bay
CD-ROM
Form
Factor
Height
Front
Access
Usage
1
133mm
(5.25in)
HH
yes
IDE CDROM
2
133mm
(5.25in)
HH
yes
open1
3
89mm
(3.5in)
SL
yes
Floppy
4
89mm
(3.5in)
SL
yes
open
Bay 6
5 ... 7
89mm
(3.5in)
SL2
yes
open
Bay 7
1. This bay does not support HDD options. It can be used for
removable media devices such as tape drives.
2. These bays will be configured as hot-swap bays on models -2AX,
-3AX, -4AX and -5AX.
Bay 2
Diskette
Bay 4
Bay 5
xSeries 220 Internal SCSI Cabling
Non-Hot-Swap Models
xSeries 220 nonhot-swap models are cabled internally with a five-drop, 16-bit wide LVD SCSI cable with a built-in multi-mode active terminator on one end of the
cable. The other end of the cable is attached to the internal 68-pin connector of the integrated Ultra160 SCSI controller. SCSI devices can be connected to any of the
five cable connectors. If 8-bit (narrow) devices are to be installed, a 68- to 50-pin converter (32G3925) is required for each narrow device.
Hot-Swap Models
xSeries 220 hot-swap models are cabled internally with a two-drop, 16-bit wide LVD SCSI cable. One end is connected to the internal 68-pin connector of the
integrated Ultra160 SCSI controller. The first drop is designed to support a SCSI device in the 3.5-inch non-hot-swap bay, while the second drop is connected to the
hot-swap SCSI backplane.The SCSI backplane provides termination for the SCSI bus.
Other Configuration Alternatives
In the case where a RAID controller is used to support internal drives in a xSeries 220, the standard cable is moved from the onboard controller to the RAID adapter.
To connect a tape drive to the onboard or other supported SCSI controller, the two-drop cable from Media Bay Tray and LVD Cable Kit (P/N 10K2340) must be used.
External SCSI support can be obtained by installing an optional SCSI adapter or RAID controller and using appropriate external SCSI cabling.
24
xSeries 220 I/O Options
Description
Adapter
Length
PCI
Support
Slots
Supported1
Full
32/64-bit
1, 2, 3, 5
Storage Controllers2
ServeRAID-4L Ultra160 SCSI Controller3
37L6080
ServeRAID-4M Ultra160 SCSI Controller4
Full
32/64-bit
1, 2, 3, 5
19K4646
PCI Wide Ultra160 SCSI Adapter5
Half
32-bit
1 ... 5
02K3454
PCI Fast/Wide Ultra SCSI Adapter
Half
32-bit
1 ... 5
1 ... 5
Networking6
Ethernet
09N9901
10/100 EtherLink Server Adapter by 3Com
Half
32-bit
19K4401
Netfinity Gigabit Ethernet Adapter (copper)
Half
32/64-bit
1 ... 5
34L4601
Netfinity 10/100 Ethernet Security Adapter
Half
32/64-bit
1 ... 5
06P3601
10/100 Ethernet Server Adapter
Half
32-bit
1 ... 5
06P3701
Gigabit Ethernet SX Server Adapter (fiber)
Half
32/64-bit
1 ... 5
1 ... 5
Token Ring
34L0701
Token-Ring 16/4 PCI Adapter 2 with Wake on LAN
Half
32-bit
34L5001
16/4 Token-Ring PCI Management Adapter
Half
32-bit
1 ... 5
34L5201
High-Speed 100/16/4 Token-Ring PCI Management Adapter
Half
32-bit
1 ... 5
Slot 1- 33MHz, 32-bit, 5V or Universal
Slot 2- 33MHz, 32-bit, 5V or Universal
Slot 3- 33MHz, 64-bit, 5V or Universal
Slot 4- 33MHz, 64-bit, 5V or Universal
Slot 5- 33MHz, 64-bit, 5V or Universal
-
37L6091
All Slots-Full Length
Part
Number
External Connector Access
Communications7
33L4618
PCI V.90 56 Data/Fax Modem
Half
32-bit
1 ... 5
37L14xx
Serial I/O SST 8, 16 and 128 Port Adapters8
Half
32-bit
1 ... 5
Half
32-bit
2
Systems Management
09N7585
Remote Supervisor Adapter
IBM XSERIES 220
1. The xSeries 220 has five full-length, 33MHz PCI expansion slots, three 64-bit and two 32-bit.
2. xSeries 220 has an integrated Ultra160 SCSI Controller with a single internal channel and includes a five-drop, multi-mode terminated LVD SCSI cable.
3. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides a single channel, 16MB of ECC cache and either one internal or one external Ultra160
connection. External connector is 0.8mm VHDCI.
4. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides two channels, 64MB of battery-backed ECC cache and two external 0.8mm VHDCI
Ultra160 connectors.
5. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector
with a 0.8mm VHDCI connector. Only one of the two connectors may be utilized.
6. The xSeries 220 includes an integrated full-duplex, 10/100Mbps Ethernet controller. “Wake on LAN™” support is provided for slot one only.
7. xSeries 220 includes two USB ports, two high-speed serial/asynchronous ports, (NS16550A software compatible) and one high-speed parallel port supporting devices using SSP/EPP/ECP
protocols adhering to the IEEE 1284 Standard.
8. See Appendix E for details on Serial I/O Options and configuration limitations.
xSeries 220 Power, Monitor & Accessories
Part Number
Description
Power1
Free Standing Uninterruptible Power Supply (UPS)2
94G3134
APC Smart-UPS 700
94G3135
APC Smart-UPS 1000
94G3136
APC Smart-UPS 1400
Rack Mount Uninterruptible Power Supply (UPS)2
94G6674
APC Smart-UPS 1400RMB3
94G6676
APC Smart-UPS 3000RMB3
37L6861
APC Smart-UPS 5000RMB4
Monitors5
633347N
E51 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6331N2N
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6332J1N
E74 Color Monitor 17in (403mm, 15.9in Viewable Image Size), stealth black6
66274AN
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black6
9511AG1
T54A TFT LCD Color Monitor (306mm x 230mm, 15in Viewable Image Size), stealth black7
37L6888
Netfinity Flat Panel Monitor Rack Mount Kit II
1. The xSeries 220 includes a 330W voltage sensing power supply and a single line cord.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. The xSeries 220 includes an integrated SVGA controller (S3 Savage4 Chipset) with 8MB of video memory.
6. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity Rack Keyboard
Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
25
Part Number
Description
Conversion Kits
09N4300
4Ux20D Tower-to-Rack Kit
930842P
Netfinity Enterprise Rack
Rack and NetBAY1
930842X
Netfinity Enterprise Expansion Cabinet
9306900
Netfinity Rack
9306910
Netfinity Rack (Perforated Doors)
36L9703
Netfinity Rack Extension Kit
9306200
Netfinity NetBAY22
36L9702
NetBAY22 Rack Extension Kit
28L3644
Space Saver II Keyboard3, 4
01K1260
TrackPoint IV 104-key Black Keyboard4, 5
28L3621
Preferred Keyboard (stealth black)5
28L3673
Sleek 2-button Stealth Black Mouse
Keyboard and Mouse2
1 Rack installation of an xSeries 220 requires 4Ux20D Tower-to-Rack Kit (P/N 09N4300) and one of the racks listed here. See IBM
Netfinity Rack Cabinet and Options section for IBM rack supported devices.
2. The xSeries 220 includes both a mouse and nonspace saver keyboard.
3. Installation within a rack requires optional keyboard tray(P/N 28L4707) (stows in “ready-to-use” position).
4. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
5. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat panel
display.
xSeries 220 Tape Options
Part
Number
Bays
SCSI
Supported Interface
(bit)
Tape Drives
09N4041
12/24GB DDS/3 4-mm Internal SCSI
Tape Drive2, 3
09N4042
10/20GB NS Internal SCSI Tape Drive2, 3
00N7991
20/40GB DDS/4 4-mm Internal Tape
Drive3
00N8016
100/200GB LTO Tape Drive
Form
Factor
Termination 68/50-pin
Ext Tape
Included
Converter Enclosures1
Incl
2
8
89mm
(3.5in) HH
or 133mm
(5.25in) HH
Y
Y
3510020, 3551001
2, 4
8
89mm
(3.5in) SL or
133mm
(5.25in) HH
Y
Y
3510020, 3551001
2
16 Ultra2 LVD
89mm
(3.5in) HH
or 133mm
(5.25in) HH
N
N/A
35100204,
35510015
N/A
16 Ultra2 LVD
133mm
(5.25in) FH
N
N/A
35510015
-
External Tape Enclosures
3510020
External Half High SCSI Storage Enclosure6
-
8, 16
Desktop
N
N
3551001
NetMEDIA Storage Expansion Unit EL7
-
16
Rack
Y
N
-
10L7113
NetMEDIA Systems Management Adapter8
-
16 LVD
-
N
N
3551001
-
16 LVD/SE
External
Y
N
3510020
-
16 LVD
Internal
Y
N
3551001
Associated Options
00N7956
10K2340
26
68-pin External Multimode LVD/SE SCSI
Terminator
Media Bay Tray and LVD Cable
Kit3, 5
Note: All models include an Ultra160 SCSI controller with a five-drop multi-mode terminated LVD SCSI cable. Single-ended devices attached to this cable will limit the entire SCSI bus to
single-ended performance. All tape drives and external tape enclosures are supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which includes a five-drop multi-mode
terminated LVD SCSI cable and an external 0.8-mm VHDCI connector.
1. To determine cable requirements, note the tape drive’s SCSI interface, the appropriate SCSI controller from the system configurator section, and the desired enclosure, then refer to
Appendix D: Cables - Storage Units - Controllers.
2.This single-ended device will limit the SCSI bus to which it is attached to Ultra SCSI speeds. To provide a dedicated tape SCSI bus, install PCI Wide ultra160 SCSI Adapter (P/N
19K4646) which includes a five-drop multi-mode LVD SCSI cable.
3. RAID configurations, where the standard SCSI cable is attached to a RAID adapter, require the two-drop multi-mode terminated LVD SCSI cable included with Media Bay Tray and LVD
Cable Kit (P/N 10K2340) for attachment of the tape drive to the standard SCSI controller.
4. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956)
5. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) requires replacement of the standard single-ended internal cables with one or more
(depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop mult-mode terminated cable. If the standard cables are
used for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
6. Provides a black desktop 133mm (5.25in) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self
termination or 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
7. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, 19in rack mountable tape enclosure which includes two full-high (FH) or four half-high (HH) extended length
133mm (5.25in) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies
and two power cords are also included. Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a 930842x rack.
8. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a 3551001 to provide repeater function, LVDS interface, aggregate cable lengths up to 12m when attached
to an LVD SCSI controller, and auto-termination when the 3551001 is powered off. External connector is 0.8mm VHDCI.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes
xSeries 220 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or
IBM Marketing Representative for assistance with your specific configuration requirements.
Internet Server
Part Number
8645-3AX
33L3142
37L7202
00N7991
6331N2N
94G3134
Description
Quantity
x220 866MHz/256KB, 128MB ECC, OPEN-HS, 48X, PCI
128MB 133MHz SDRAM ECC RDIMM
18.2GB Ultra160 SCSI Hot-Swap SL HDD
20/40GB DDS/4 4mm Internal Tape Drive
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
APC Smart-UPS 700
1
11
22
1
1
1
1. For a total of 256MB of system memory.
2. For a total of 36.4GB of internal storage.
With this is mind, the xSeries 200 was selected to provide an affordable price point for the growing Internet server market with two-way Pentium III processing,
256MB of system memory (expandable to 4GB), and power protection with an APC Smart-UPS.
The network configuration depends on the method that will be used to connect the server to the Internet. Usually fast Ethernet routers are used, but if other methods
are used you can add the appropriate adapter. The configuration includes a tape backup unit for secure backup of critical data in the event of a system or storage
failure.
File and Print Server
Part Number
8645-2AX
33L3142
37L7202
00N7991
6331N2N
94G3134
Description
Quantity
x220 800MHz/256KB, 128MB ECC, OPEN-HS, 48X, PCI
128MB 133MHz SDRAM ECC RDIMM
18.2GB Ultra160 SCSI Hot-Swap SL HDD
20/40GB DDS/4 4mm Internal Tape Drive
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
APC Smart-UPS 700
1
11
32
1
1
1
1. For a total of 256MB of system memory.
2. For a total of 54.6GB of internal storage.
A small business or departmental server is usually required to perform all typical server functions while servicing up to 100 users in a normal workgroup computing
environment, but doesn’t require the high-end performance and fault-tolerance properties of larger servers.
The sample configuration above consists of an xSeries 220 with 256MB of memory and 54.6GB of HDD space. It has enough processor power and memory to run
most current network operating systems comfortably and enough hard disk drive space to store a significant amount of data with additional external storage
expansion still available. Demanding network traffic is effectively handled by the standard 100Mbps Ethernet connection.
This configuration also includes a tape backup unit, monitor, and a UPS to keep the system protected during power surges and outages.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
27
IBM XSERIES 220
An Internet server handles all requests from the Internet (Intranet or Extranet). Usually, this type of server has the same characteristics as a normal file server. The
main difference is that an Internet server talks a different language (TCP/IP vs NETBEUI or IPX/SPX) and often needs to do an extra security check (firewall). In the
case of an Internet server, the server itself talks mostly to just one client, the Internet Service Provider (ISP), instead of many clients as a file server does.
Application Server
Part Number
8645-42X
10K3819
33L3144
37L6091
00N8205
10K2340
00N7991
6331N2N
94G3134
Description
x220 933MHz/256KB, 128MB ECC, 18.2GB, 48X, PCI
Netfinity 933MHz with 133MHz FSB and 256KB Advanced Transfer Cache
Pentium III Upgrade Processor
256MB 133MHz SDRAM ECC RDIMM
ServeRAID-4L Ultra160 SCSI Controller
18.2GB 7200rpm Ultra160 SCSI HDD
Media Bay Tray and LVD Cable Kit3
20/40GB DDS/4 4mm Internal Tape Drive NS Internal SCSI Tape Drive
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
APC Smart-UPS 700
Quantity
1
1
11
1
22
1
1
1
1
1. For a total of 384MB of system memory.
2. Three HDDs are used for RAID 5 protection. Effective capacity is two HDDs or 36.4GB
3. Cable for dedicated attachment of tape to standard controller.
An application server differs from a file and print server in that it has a higher workload in providing application serving requirements for users. With this in mind, the
xSeries 220 was selected to provide an affordable price point for an application server with two-way Pentium III processing, 384MB of system memory (expandable
to 4GB), and availability features such as RAID-protected internal storage and power protection with an APC Smart-UPS.
28
IBM XSERIES 220
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
29
IBM xSeries 230 and Netfinity 5100
)
)
) ax
or
3
)
ns
)
aidl /M
)
ss
ID
a
v
x
d
e
A
F
t
a
A
r
)
R
,
a
oc
/M
al/ (S
a,
MM
nd
DD
Pr
td
otive
ltr
ta
DI
5
(TD
r
(S
,H
nt ps)
(
U
S
R
s
e
s
)
y
,
,
s
t
b
z
y k
=
r
it
m
al
al
lo
nt
Ba is
(R
ge t (M (Du
MH sso B)
7
,S
ion
)
il)
ua
iard D
x)
na rne
er
d ( oce (K
r
pt
e
d
Q
a
4
a
e
t
va vail
e
w
e
a
e
O
l
e
y
e
r
a
M
A
M
l
(
o
)
r
l
/
/
h
H
M
h
p
r
l
P
D
o
P
e
p
E
d
/A
t
c
y
l
r
(
l
o
a
S
t
l
m
f
e
b
p
t
a
D
t
E
c
t
a
l
a
I
a
o
e
S
p
u
n
c
n
(
(
t
m
d
or er C C
w
To Tot
ab r n
Fa r S
ys
da
Co
wa
ar
ry
ss
(
Nu
ra
b
s(
ov te
OM
un
SI
t-S
ce um 2 EC emo
rt
v S nbo
hd
m In
rm owe
-R
ay lots
d
t
o
C
o
a
d
e
o
i
B
e
D
r
P
N
F P
S
H
L
O
A
R
S
R
P
W
M
C
)
ax
/M
d
St
2
xSeries 230 / Netfinity 5100 At-A-Glance
8658-21Y
27-Mar
733
1/2
256
128MB(R)/4GB
Tower
1/3
O - Power
S - HDD
O - Power
Y 10/100
D,U160
4/2
0/
218.4GB
40X-17X
10/8
5/5
8658-2RY1
-
733
1/2
256
128MB(R)/4GB
Rack
(5U)
1/3
O - Power
S - HDD
O - Power
Y 10/100
D,U160
4/2
0/
218.4GB
40X-17X
10/8
5/5
8658-41Y
-
866
1/2
256
128MB(R)/4GB
Tower
1/3
O - Power
S - HDD
O - Power
Y 10/100
D,U160
4/2
0/
218.4GB
40X-17X
10/8
5/5
8658-4RY1
-
866
1/2
256
128MB(R)/4GB
Rack
(5U)
1/3
O - Power
S - HDD
O - Power
Y 10/100
D,U160
4/2
0/
218.4GB
40X-17X
10/8
5/5
8658-51Y
-
933
1/2
256
128MB(R)/4GB
Tower
1/3
O - Power
S - HDD
O - Power
Y 10/100
D,U160
4/2
0/
218.4GB
40X-17X
10/8
5/5
8658-5RY1
-
933
1/2
256
128MB(R)/4GB
Rack
(5U)
1/3
O - Power
S - HDD
O - Power
Y 10/100
D,U160
4/2
0/
218.4GB
40X-17X
10/8
5/5
8658-61Y6
-
1GHz
1/2
256
128MB(R)/4GB
Tower
1/3
O - Power
S - HDD
O - Power
Y 10/100
D,U160
4/2
0/
218.4GB
40X-17X
10/8
5/5
8658-6RY1, 6
-
1GHz
1/2
256
128MB(R)/4GB
Rack
(5U)
1/3
O - Power
S - HDD
O - Power
Y 10/100
D,U160
4/2
0/
218.4GB
40X-17X
10/8
5/5
1. Housed in a 19in rack mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “Power, Monitor & Accessories” for supported IBM racks.
2. High-speed, 133MHz SDRAM.
3. Up to two additional 250W Hot-Swap Redundant Power Supplies (P/N 33L3760) and a single Hot-Swap Power Supply Expansion Kit (P/N 37L6881) are required for power supply redundancy.
See xSeries 230 / Netfinity 5100 Power, Monitor & Accessories for additional information.
4. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
5. Intel Pentium III processor with advanced transfer (full-speed) L2 cache and 133MHz Front-Side Bus.
6. This model is an IBM xSeries 230.
7. Not available from IBM after this date. Business Partner inventory may be available.
xSeries 230 / Netfinity 5100 Processors
Part
Number
Processor Upgrades with 256 KB Cache
(Full Speed)
SMP
Support1
Processor Speed Upgrade2
19K4630
Netfinity 866MHz 133 FSB/256KB Upgrade with Pentium III Processor
4xY
1 ... 3xY
19K4631
Netfinity 933MHz 133 FSB/256KB Upgrade with Pentium III Processor
5xY3
-
19K4640
1GHz Upgrade with 133MHz FSB and 256KB Advanced Transfer Cache
Pentium III Processor
6xY
5xY
1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of two processors may be installed. All processors must be identical in type, speed and cache size. Upgrades may require a
BIOS update. To obtain the latest Flash BIOS, access www.pc.ibm.com/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
3. Netfinity 933MHz Upgrade Processor (P/N 19K4631) is only supported on 8658-5xY models due to thermal restrictions.
30
xSeries 230 / Netfinity 5100 Memory
Total
Memory1
128MB
(1 x 128)
Models
RDIMM Socket 4
RDIMM Socket 3
RDIMM Socket 2
RDIMM Socket 1
Std (R)DIMM
The recommended order of installation:
Slot 1-2-3-4
Memory Description1
Part
Number
Quantity of RDIMMs Added
128MB
(33L3123)
256MB
(33L3125)
512MB
(33L3127)
1GB
(33L3129)
256MB
1
-
-
-
384MB
2 or
1
-
-
512MB
3
-
-
640MB
-
2 or
1
-
896MB
-
3
-
-
1024MB
-
42
-
-
1152MB
-
-
2 or
1
33L3123
128MB 133MHz SDRAM ECC RDIMM II
1664MB
-
-
3
-
33L3125
256MB 133MHz SDRAM ECC RDIMM II
2048MB
-
-
42
-
33L3127
512MB 133MHz SDRAM ECC RDIMM II
2176MB
-
-
-
2
33L3129
1GB 133MHz SDRAM ECC RDIMM II
3200MB
-
-
-
3
4096MB (max)
-
-
-
42
1. The recommended order of installation is in sequence from Socket 1 to Socket 4.
Memory size is not a factor.
This table does not represent all possible memory configurations. Memory modules may vary in price
per MB. Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger
RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating
system specifications for further information.
2. Requires removal of standard memory.
xSeries 230 / Netfinity 5100 Hard Disk Drive (HDD) and External Storage
Total Int
Storage1
7200RPM HDDs
10,000RPM HDDs
9.1GB
18.2GB
36.4GB
(37L7201)
(37L7202)
(37L7203)
0GB
9.1GB
18.2GB
(37L7204) (37L7205)
15,000RPM HDDs
36.4GB
9.1GB
18.2GB
(37L7206)
(19K0655)
(19K0656)
Standard on base models
9.1GB
1
-
-
1
-
-
1
-
18.2GB
2
1
-
2
1
-
2
1
27.3GB
3
-
-
3
-
-
3
-
36.4GB
4
2
1
4
2
1
4
2
45.5GB
5
-
-
5
-
-
5
-
54.6GB
6
3
-
6
3
-
6
3
72.8GB
-
4
2
-
4
2
-
4
91GB
-
5
-
-
5
-
-
5
109.2GB
-
6
3
-
6
3
-
6
145.6GB
-
-
4
-
-
4
-
-
182GB
-
-
5
-
-
5
-
-
218.4GB
(max)
-
-
6
-
-
6
-
-
IBM XSERIES 230 /
NETFINITY 5100
This table does not represent all possible HDD configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal Storage
listed is within +/- 0.2GB unless otherwise noted.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
31
Bay
Form
Factor
Height
Front
Access
Usage
A
133mm
(5.25in)
HH1
Yes
Open
B
133mm
(5.25in)
HH1
Yes
Open
37L7201
9.1GB Ultra160 SCSI Hot-Swap SL
HDD
7200
-
133mm
(5.25in)
SL
Yes
IDE CDROM
37L7202
18.2GB Ultra160 SCSI Hot-Swap
SL HDD
-
89mm
(3.5in)
SL
Yes
Diskette
37L7203
36.4GB Ultra160 SCSI Hot-Swap
SL HDD
C ... H
HS
SL2
Yes
Open
37L7204
1. Two half-high (HH) bays can be combined to support a single full-high (FH)
device. Installation of devices in Bays A or B may require Netfinity Hot-Swap
Power Supply Expansion Kit (P/N 37L6881) and at least one Netfinity 250W
Hot-Swap Redundant Power Supply (P/N 33L3760). Installation of HDDs in
Bays A and B also requires Media Bay Tray and LVD Cable Kit
(P/N 10K2340).
2. Two slim-line (SL) bays (C/D, E/F, G/H) can be combined to support a
single half-high (HH) device.
Part
Number
Description
RPM
Height
Bays
Supported
Max
Qty
SL
C ... H
6
7200
SL
C ... H
6
7200
SL
C ... H
6
9.1GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
C ... H
6
37L7205
18.2GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
C ... H
6
37L7206
36.4GB 10-K Ultra160 SCSI HotSwap SL HDD
10,000
SL
C ... H
6
19K0655
9.1GB 15Krpm Ultra160 SCSI HotSwap HDD
15000
SL
C ... H
6
19K0656
8.2GB 15Krpm Ultra160 SCSI HotSwap HDD
15000
SL
C ... H
6
10K2340
Media Bay Tray and LVD Cable
Kit1
-
-
A+B
1
33L3760
250W Hot-Swap Redundant Power
Supply
-
-
-
-
37L6881
Hot-Swap Power Supply Upgrade
Kit2
-
-
-
-
Hot-Swap Ultra160 HDDs
Associated Options
Tower Model View
Removable Media (RM)
Diskette
A
B
CD-ROM
For clarity purposes, bay labels in
these diagrams are for reference by
the accompanying tables and are not
the actual labels. Refer to the
documentation shipped with the
system for further details on actual
labels.
Rack Model View
Hot-Swap
(HS)
Hot-Swap (HS)
F
B
CD-ROM
G
H
H
EXP300 Storage Expansion Unit4
Rack
(3U)
09N7296
EXP300 Rack-to-Tower Conversion
Kit
-
35601RU
FAStT EXP500 Storage Expansion
Unit5
Rack
(3U)
35421RU
FAStT200 Storage Server6, 7
Rack
(3U)
35422RU
FAStT200 HA Storage Server6
Rack
(3U)
19K1121
FAStT200 Redundant RAID
Controller
A
D
G F E
D C
Form
Factor
35311RU
Removable Media (RM)
C
E
External Storage Expansion
Units3
Diskette
-
1. Media Bay Tray and LVD Cable Kit (P/N 10K2340) contains a two-drop terminated LVD SCSI cable and the
hardware required to convert two half-high 5.25in removable media bays into two nonhot-swap 7200RPM HDD
bays.
2. Hot-Swap Power Supply Upgrade Kit (37L6881) contains a hot-swap power backplane that supports
installation for up to three hot-swap power supplies.
3. To configure a SCSI storage device, select an optional SCSI controller then refer to Appendix D: Cables Storage Units - Controllers to confirm the controller supports the desired External Storage Expansion Unit and to
select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section. For
Fibre Channel storage devices, refer to the Fibre Array Solutions section.
4. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each
with its own power cord.
5. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each
with its own power cord.
6. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power
cord.
7. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID
Controller (P/N 19K1121).
xSeries 230 / Netfinity 5100 Internal SCSI Cabling
The xSeries 230 and Netfinity 5100 contain a DASD backplane supporting six hot-swap, SCA-2 compliant drive bays. The backplane is connected to channel A of the
integrated dual-channel, Ultra160 SCSI controller connector through a 16-bit LVD SCSI cable. If internal RAID support is required, this cable can be used to connect
to a supported RAID adapter rather than the integrated SCSI controller. No external SCSI port is included.
A two-drop, 16-bit LVD SCSI cable with integrated terminator is also included with the Netfinity Hot-Swap Power Supply Expansion Kit (P/N 37L6881).This cable is
included in the expansion kit because installation of SCSI devices in bays A and B requires additional power. The two-drop cable supports up to two internal devices
in these bays. This cable can be attached to channel B of the integrated dual-channel Ultra160 SCSI controller or to a supported SCSI adapter.
32
xSeries 230 / Netfinity 5100 I/O Options
Part
Number
Description
Adapter
Length
PCI
Support
Slots
Supported
Storage Controllers1
37L6091
ServeRAID-4L Ultra160 SCSI Controller2
Full
32/64-bit
1 ... 5
37L6080
ServeRAID-4M Ultra160 SCSI Controller3
Full
32/64-bit
1 ... 5
37L6889
ServeRAID-4H Ultra160 SCSI Controller4
Full
32/64-bit
1 ... 5
19K4646
PCI Wide Ultra160 SCSI Adapter5
Half
32/64-bit
1 ... 5
02K3454
PCI Fast/Wide Ultra SCSI Adapter
Half
32-bit
1 ... 5
-
35421RU
FAStT200 Storage Server
-
-
-
35422RU
FAStT200 HA Storage Server
-
-
-
35341RU
SAN Fibre Channel Managed Hub
-
-
-
2109S08
SAN Fibre Channel Switch, 8-Port
-
-
-
2109S16
SAN Fibre Channel Switch, 16-Port
-
-
-
2108R3L
SAN Data Gateway Router Ultra SCSI LVD Port7
-
-
-
1 ... 5
Networking8
Ethernet
19K4401
Netfinity Gigabit Ethernet Adapter (copper)
Half
32/64-bit
06P3601
10/100 Ethernet Server Adapter
Half
32-bit
1 ... 5
06P3701
Gigabit Ethernet SX Server Adapter (fiber)
Half
32/64-bit
1 ... 5
09N9901
10/100 EtherLink Server Adapter by 3Com
Half
32-bit
1 ... 5
Netfinity 10/100 Ethernet Security Adapter
Half
32/64-bit
1 ... 5
34L4601
All Slots - Full Length
1 ...5
-
Slot 4- Bus B, 33MHz, 64-bit, 5V or Universal
32/64-bit
-
Slot 5- Bus B, 33MHz, 64-bit, 5V or Universal
Half
Slot 3- Bus B, 33MHz, 64-bit, 5V or Universal
Netfinity FAStT Host Adapter
FAStT500 Storage Server
Slot 2- Bus A, 33MHz, 32-bit, 5V or Universal
00N6881
35521RU
Slot 1- Bus A, 33MHz, 32-bit, 5V or Universal
Fibre Storage Controllers and Options6
Exterior Connector Access
Token Ring
34L0701
Token-Ring 16/4 PCI Adapter 2 with Wake on LAN9
Half
32-bit
1 ... 5
34L5201
High-Speed 100/16/4 Token-Ring PCI Management
Adapter9
Half
32-bit
1 ... 5
Communications
10
33L4618
PCI V.90 56 Data/Fax Modem11
Half
32-bit
1 ... 5
37L14xx
Serial I/O SST 8, 16 and 128 port adapters12
Half
32-bit
1 ... 5
Systems Management13
01K7209
Netfinity Advanced System Management PCI Adapter14
Full
32-bit
1 ... 5 15
03K9309
Netfinity Advanced System Management Interconnect
Cable Kit16
-
-
-
36L9654
Netfinity Advanced System Management Token-Ring
Connection17
-
-
-
9086001
Netfinity ESCON Adapter18
Full
32-bit
1 ... 519
Host Attach
IBM XSERIES 230 /
NETFINITY 5100
1. xSeries 230 / Netfinity 5100 includes a dual-port, dual-channel Ultra160 SCSI controller for internal use only. No standard external port is available. See “Internal SCSI Cabling”
for cabling alternatives.
2. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides a single channel, 16MB of ECC cache and either one internal or one external
Ultra160 connection. External connector is 0.8mm VHDCI.
3. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides two channels, 64MB of battery-backed ECC cache and two internal and
two external Ultra160 connectors (only two connectors may be utilized). External connectors are 0.8mm VHDCI .
4. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266MHz PowerPC 750 processor and provides 128MB of battery-backed ECC cache with two internal and up to four
external Ultra160 connectors (only four connectors may be utilized). External connectors are 0.8mm VHDCI.
5. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external
connector with a 0.8mm VHDCI connector. Only one of the two connectors may be utilized.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
33
6. See Netfinity Fibre Array Solutions section for additional configuration information.
7. The 2108R3L SAN Data Gateway Router Ultra SCSI LVD port replaces both the Single-ended and Differential SAN Data Gateway Routers (P/N 2108R3D and 2108R3S).
8. xSeries 230 / Netfinity 5100 includes a full-duplex, 10/100Mbps Ethernet PCI controller.
9. The Wake on LAN function of this option is not supported by this server.
10. xSeries 230 / Netfinity 5100 includes two USB ports, two serial and one parallel port.
11. Due to homologation variances, modem availability may differ by country.
12 See Appendix E for details on Serial I/O Options and configuration limitations.
13. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into xSeries 230 / Netfinity 5100 works with Netfinity Director to provide significant
system management function. When used with optional Netfinity Advanced System Management PCI Adapter (P/N 01K7209) and Netfinity Advanced System Management
Interconnect Cable Kit (P/N 03K9309) additional management and control of up to 12 service processors from a remote console through a single modem or LAN connection is
possible.
14. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56W AC adapter, which requires a separate power source. Provides an
integrated 10/100 Ethernet port and a PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection (P/N 36L9654).
15. A maximum quantity of one is supported.
16. Required for all xSeries / Netfinity servers containing a standard Advanced System Management Processor that are to be interconnected for system management support
through a LAN or modem connection. Optional Netfinity Advanced System Management PCI Adapter (P/N 01K7209) includes the contents of this option. Up to 12 service
processors may be interconnected (including standard and optional processors) with an aggregate connection length of no more than 91.4m (300ft). A customer-supplied
Ethernet cable is required for each interconnection.
17 Contains an IBM Turbo 16/4 Token-Ring PCI card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter, and a PC Card to nine-pin DShell cable which is routed to a rear chassis cut-out. The Netfinity Advanced System Management PCI Adapter’s integrated Ethernet port and Netfinity Advanced System
Management Token-Ring Connection cannot be connected or used together. To download the latest firmware access www.pc.ibm.com/us/netfinity. Select “Server Support,”
“Family,” “Model,” “Downloadable files” and finally “Advanced Systems Management.”
18. Provides an ESCON MIC and a DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.
19. A maximum of two 9086001 adapters (installed in nonadjacent slots) are supported in a single server.
xSeries 230 / Netfinity 5100 Power, Monitor & Accessories
Part Number
Description
Power1
33L3760
250W Hot-Swap Redundant Power Supply2
37L6881
Hot-Swap Power Supply Expansion Kit3
94G3135
APC Smart-UPS 1000
Uninterruptible Power Supply (UPS)4
94G3136
APC Smart-UPS 1400
94G6674
APC Smart-UPS 1400RMB5
94G6676
APC Smart-UPS 3000RMB5
37L6861
APC Smart-UPS 5000RMB6
Monitors7
633347N
E51 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black8
6331N2N
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black8
6332J1N
E74 Color Monitor 17in (403mm, 15.9in Viewable Image Size), stealth black8
66274AN
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black8
9511AG1
T54A TFT LCD Color Monitor (306mm x 230mm, 15in Viewable), stealth black9
1. xSeries 230 / Netfinity 5100 include single 250W, hot-swap power supply and a single 9ft 110V power cord with an
IEC 320-C13 connector on the system end and NEMA 5-15P on the other end. Power supply redundancy may be
achieved with the addition of optional 250W Hot-Swap Redundant Supply (P/N 33L3760). Hot-Swap Power Supply
Upgrade Kit (P/N 37L6881) is required when optional power supplies are to be added. Redundancy for configurations
of greater than 250W requires installation of a second optional supply. Additional power may be required when
installing a SCSI device in bay A or B. Configurations exceeding four SL hot-swap hard disk drives and two PCI
adapters require both Hot-Swap Power Supply Expansion Kit (P/N 37L6881) and at least one optional 250W Hot-Swap
Redundant Power Supply (P/N 33L3760). An optional SCSI cable is required for attachment of media bay devices to
Ultra160 controller B. No external SCSI port is available. External tape enclosures are supported by PCI Wide Ultra160
SCSI Adapter (P/N 19K4646) which has an external 0.8mm VHDCI connector. To assist in determining when an
additional power supply is required to preserve redundancy, a “Non-Redundant LED” is a standard feature.
2. 250W Hot-Swap Redundant Power Supply (P/N 33L3760) includes a single 6ft power cord for connection to a low
voltage wall outlet. Hot-Swap Power Supply Expansion Kit (P/N 37L6881) must be installed prior to adding optional
power supplies.
3. Hot-Swap Power Supply Expansion Kit (P/N 37L6881) includes a hot-swap power backplane, terminated two-drop
LVD SCSI cable, and mounting brackets for DLT tape drives. Required when installing a second power supply or
devices in the 133mm (5.25in) HH bays.
4. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
5. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
6. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
7. Netfinity 5100 uses an SVGA controller (S3 Savage4 chipset) with 8MB of video memory.
8. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
9. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity
Rack Keyboard Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
34
Part Number
Description
Conversion Kits
37L6858
5Ux24D Tower-to-Rack Kit
Rack and NetBAY1
930842P
Netfinity Enterprise Rack
930842X
Netfinity Enterprise Expansion Cabinet
9306900
Netfinity Rack
9306910
Netfinity Rack (includes perforated front door)
9306200
Netfinity NetBAY22
Keyboard and Mouse2
28L3644
Space Saver II Keyboard3, 5
01K1260
TrackPoint IV 104-Key Black Keyboard4, 5
28L3621
Preferred Keyboard (stealth black)4
28L3673
Sleek 2-Button Stealth Black Mouse
1. xSeries 230 / Netfinity 5100 rack models are housed in a 19in rack mountable drawer and require
one of the racks listed here. See Rack Cabinet and Options section for IBM rack supported devices.
2. Tower models include both a keyboard and mouse. Rack models include neither.
3. Installation within a rack requires optional keyboard tray (P/N 28L4707) (stows in ready-to-use
position).
4. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot
share a keyboard tray with a flat panel display.
5. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
xSeries 230 / Netfinity 5100 Tape Options
Part
Number
Tape Drives
Bays
Supported
SCSI
Interface
(bit)
00N7991
20/40GB DDS/4 4mm Internal Tape Drive1
A, B
16 Ultra2 LVD
09N4040
20/40GB DLT Internal SCSI Tape Drive1
A+B
8
00N7990
40/80GB DLT Internal SCSI Tape Drive1
A+B
16 Ultra2 LVD
1
Form
Factor
89mm
(3.5in) HH
or 133mm
(5.25in) HH
133mm
(5.25in) FH
133mm
(5.25in) FH
133mm
(5.25in) HH
133mm
(5.25in) FH
Termination
Included
68/50-pin
Converter
Incl
Ext Tape
Enclosures
N
N/A
N
Y
N
N/A
N
N/A
N
N/A
35510012
Y
-
-
N
N
35510012
35100203,
35510012
3503B0X3,
3551001
3503B0X3,
35510012
35100203,
35510012
00N8017
60/120GB 8mm M2 SCSI Tape Drive
A, B
16 Ultra2 LVD
00N8016
100/200GB LTO Tape Drive1
A+B
16 Ultra2 LVD
3502108
DLT Tape Autoloader
N/A
16
00N7992
120/240GB DDS/4 Tape Autoloader1
A+B
16 Ultra2 LVD
-
16
Desktop or
Rack
Y
-
-
-
8/16
16
16
16 LVD
Desktop
Desktop
Rack
-
N
N
Y
N
N
N
N
N
3551001
-
16 LVD/SE
Ext
Y
N
-
16 LVD
Int
Y
N
-
16 LVD
Int
Y
N
-
-
-
-
-
-
-
Tape Autoloaders
Desktop
133mm
(5.25in) FH
External Tape Libraries4
3502x14
DLT Tape Library
3510020
3503B0X
3551001
10L7113
External Half High SCSI Storage Enclosure5
DLT External SCSI Enclosure6
NetMEDIA Storage Expansion Unit EL7
NetMEDIA Systems Management Adapter8
IBM XSERIES 230 /
NETFINITY 5100
External Tape Enclosures
Associated Options
00N7956
10K2340
37L6881
33L3760
68-pin External Multimode LVD/SE SCSI
Terminator
Media BayTray and LVD Cable Kit1, 2
Netfinity Hot-Swap Power Supply Expansion
Kit9
250W Hot-Swap Redundant Power Supply
Updated 03/22/01
3510020,
3503B0X
3551001
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
35
Note: Additional power may be required when installing a SCSI device in bay A or B. Configurations exceeding four SL hot-swap hard disk drives and two PCI adapters require both HotSwap Power Supply Expansion Kit (P/N 37L6881) and at least one optional 250W Hot-Swap Redundant Power Supply (P/N 33L3760). An optional SCSI cable is required for attachment of
media bay devices to Ultra160 controller B. No external SCSI port is available. External tape enclosures are supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which has an
external 0.8mm VHDCI connector.
1. Internal tape drives require the two-drop multi-mode terminated LVD SCSI cable included with either Media Bay Tray and LVD Cable Kit (P/N 10K2340) or Hot-Swap Power Supply
Expansion Kit (P/N 37L6881).
2. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) requires replacement of the standard single-ended internal cables with one or more
(depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop mult-mode terminated cable. If the standard cables are used
for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
3. Requires 68-pin External Multimode LVD/SE SCSI terminator (P/N 00N7956).
4. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
5. Provides a black desktop 133mm (5.25in) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self-termination or
68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
6. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI
terminator (P/N 00N7956).
7. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, 19in rack mountable tape enclosure which includes two full-high (FH) or four half-high (HH) extended length 133mm
(5.25in) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power
cords are also included. Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a 930842x rack.
8. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a 3551001 to provide repeater function, LVDS interface, aggregate cable lengths up to 12m when attached to
an LVD SCSI controller, and auto-termination when the 3551001 is powered off. External connector is 0.8mm VHDCI.
9. Hot-Swap Power Supply Expansion Kit (P/N 37L6881) includes a hot-swap power backplane and two-drop multi-mode terminated LVD SCSI cable. Required when installing a second
power supply.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
xSeries 230 / Netfinity 5100 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or
IBM Marketing Representative for assistance with your specific configuration requirements.
Internet Server
Part Number
8658-51Y
33L3123
37L6091
37L7201
00N8017
6331N2N
94G3135
37L6881
33L3760
Description
Netfinity 5100 933MHz/256KB, 128MB ECC, OPEN, 40X, PCI
128MB 133MHz SDRAM ECC RDIMM II
ServeRAID-4L Ultra160 SCSI Controller
9.1GB Ultra160 SCSI Hot-Swap SL HDD
60/120GB 8mm M2 SCSI Tape Drive
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
APC Smart-UPS 1000
Hot-Swap Power Supply Expansion Kit
250W Hot-Swap Redundant Power Supply
Quantity
1
11
1
42
1
1
1
1
1
1. For a total of 256MB of system memory.
2. Three HDDs are used for RAID 5 protection. One HDD is identified as a hot-spare. Effective capacity is two HDDs or 18.2GB.
An Internet server handles all requests from the Internet (Intranet or Extranet). Usually this type of server has the same characteristics as a file server. The main
difference is that an Internet server talks a different language (TCP/IP vs NETBEUI or IPX/SPX) and often needs to do an extra security check (firewall). In the case of
an Internet server, the server itself talks mostly to one client, the Internet Service Provider (ISP), instead of many clients as a file server does.
With this in mind, the Netfinity 5100 was selected to provide an affordable price point for the growing Internet server market, 256MB of system memory (expandable
to 4GB, and availability features such as RAID-protected internal hot-swap storage and power protection with an APC Smart-UPS.
The network configuration depends on the method that will be used to connect the server to the Internet. Usually fast Ethernet routers are used, but if other methods
are used, you can add the appropriate adapter. The configuration includes a tape backup unit for secure backup of critical data in the event of a system or storage
failure.
File and Print Server
Part Number
8658-61Y
33L3123
37L6091
37L7201
00N8017
6331N2N
94G3135
37L6881
33L3760
Description
xSeries 230 1GHz/256KB, 128MB ECC, OPEN, 40X, PCI
128MB 133MHz SDRAM ECC RDIMM II
ServeRAID-4L Ultra160 SCSI Controller
9.1GB Ultra160 SCSI Hot-Swap SL HDD
60/120GB 8mm M2 SCSI Tape Drive
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
APC Smart-UPS 1000
Hot-Swap Power Supply Expansion Kit
250W Hot-Swap Redundant Power Supply
Quantity
1
11
1
52
1
1
1
1
1
1. For a total of 256MB of system memory.
2. Four HDDs are used for RAID 5 protection. One HDD is identified as a hot-spare. Effective capacity is three HDDs or 27.3GB.
A small business or departmental server is usually required to perform all typical server functions while servicing up to 100 users in a normal workgroup computing
environment, but doesn’t require the high-end performance and fault-tolerance properties of larger servers.
The sample configuration above consists of an xSeries 230 with 256MB of memory (expandable to 4GB) and 27.3GB of RAID-protected HDD space. It has enough
processor power and memory to run most current network operating systems comfortably and enough HDD space to store a significant amount of data with
additional external storage expansion still available. Demanding network traffic is effectively handled by the standard 100Mbps Ethernet connection.
The configuration also includes a tape backup unit, monitor, and a UPS to keep the system protected during power surges and outages.
36
Rack Mounted Application Server
Part Number
8658-5RY
19K4631
33L3125
37L6080
37L7201
00N8017
6331N2N
94G6674
33L3760
37L6881
9306200
28L3644
94G6670
Description
Netfinity 5100 933MHz/256KB, 128MB ECC, OPEN, 40X, PCI (Rack 5U)
933MHz 133 FSB/256KB Upgrade with Pentium III Processor
256MB 133MHz SDRAM ECC RDIMM II
ServeRAID-4M Ultra160 SCSI Controller
9.1GB Ultra160 SCSI Hot-Swap SL HDD
60/120GB 8mm M2 SCSI Tape Drive
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
APC Smart-UPS 1400RMB
250W Hot-Swap Redundant Power Supply
Hot-Swap Power Supply Expansion Kit
Industry Standard 19in Rack, EIA-310D, min depth of 28in (711mm)
Netfinity NetBAY22
Space Saver II Keyboard
Blank Filler Panel Kit
Quantity
1
1
11
1
52
1
1
1
1
1
1
1
2
1. For a total of 384MB of system memory.
2. Five HDDs are used for RAID 5 protection. Effective capacity is four HDDs or 36.4GB.
An application server differs from a file and print server in that it has a higher workload in providing application serving requirements for users. With this in mind, the
Netfinity 5100 was selected to provide an affordable price point for an application server with two-way Pentium III processing, 384MB of system memory (expandable
to 4GB), and availability features such as battery-backed cache, RAID protected internal hot-swap storage and power protection with an APC Smart-UPS.
xSeries 230 High Availability Cluster (P/N 25P1821 and 25P1822)1
(Refer to High Availability and Scalable Cluster Solutions section)
IBM XSERIES 230 /
NETFINITY 5100
1. P/N 25P1821 includes Windows NT EE as the operating system for this integrated tower solution. P/N 25P1822 uses Windows 2000 Advanced Server.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
37
IBM xSeries 240 and Netfinity 5600
r
Pa
um
tN
r
be
x)
or
)
s)
il) a
ss
ID
d)
an
vatd/M
x)
x)
r
e
)
A
F
a
A
a
a
c
/
,
M
d
o
,R
/M
al (S
/M
IM
DD
Pr
an
td
ot ive
td
tra
2
(TD
r
St
(S
RD
,H
nt ps)
(S
Ul
,
s
e
s
)
y
l
=
,
s
t
b
t
z
l
y
m
a
a isk
ti
lo
H
or
na
(R
ge t (M (Du
io
)
an
,S
(M ess B)
aBD
x)
pt
na rne
er
il)
ail
r
d i ar d
Qu
a
ed roc e (K /Ma
O
e
w
e
(
l
)
e
y
e
Av /Ava
M th
l
o
l
/
h
H
d
M
E
p
y
r
l
P
o
P
t
p
c
l
r
(
c
l
o up
a
S
D
f
m
e
S
t
a
E
t
I
t
a
l
n
a
(
e
o
r
(
p
n
c
o
To Tot
st ard
ab r n
da
so ber CC C or y
Fa er S
wa
(
s(
ov nte
Sy
IC
OM
o
un
es
-S
m
-R
ay lots
ot
ed
CS Rem I
oc Num L2 E Mem
dv Onb
or Pow
B
D
r
R
S
F
H
A
S
C
P
xSeries 240 / Netfinity 5600 At-A-Glance
8664-61Y
866
1/2
256
256MB(R)/4GB3
Tower
2/3 P, S,H,F
S-Power4
S-Fans
Y 10/100 D,U2
4/2
0/218GB
40X-17X5
10/8
5/5
8664-6RY1
866
1/2
256
256MB(R)/4GB3
Rack
(5U)
2/3 P, S,H,F
S-Power4
S-Fans
Y 10/100 D,U2
4/2
0/218GB
40X-17X5
10/8
5/5
Y 10/100 D,U2
4/2
0/218GB
40X-17X5
10/8
5/5
Y 10/100 D,U2
4/2
0/218GB
40X-17X5
10/8
5/5
Y 10/100 D,U2
4/2
0/218GB
40X-17X5
10/8
5/5
Y 10/100 D,U2
4/2
0/218GB
40X-17X5
10/8
5/5
4
8664-71Y
933
1/2
256
256MB(R)/4GB3
Tower
2/3 P, S,H,F
S-Power
S-Fans
8664-7RY1
933
1/2
256
256MB(R)/4GB3
Rack
(5U)
2/3 P, S,H,F
S-Power4
S-Fans
4
8664-81Y6
1GHz
1/2
256
256MB(R)/4GB3
Tower
2/3 P, S,H,F
S-Power
S-Fans
8664-8RY1, 6
1GHz
1/2
256
256MB(R)/4GB3
Rack
(5U)
2/3 P, S,H,F
S-Power4
S-Fans
1. Housed in a 19in Rack mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “Power, Monitor & Accessories” for supported IBM
racks.
2. Intel Pentium III processor with advanced transfer (full speed) L2 cache and 133MHz Front-Side Bus.
3. High-speed 133MHz SDRAM.
4. Robust configurations may require optional 250W Hot-Swap Redundant Power Supply (P/N 33L3760) for redundancy. See “Power” under “Power, Monitor & Accessories” for
additional information.
5. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
6. This model is an IBM xSeries 240.
xSeries 240 / Netfinity 5600 Processors
Part
Number
Processor Upgrades with 256KB Cache
(Full Speed)
SMP
Support1
Processor Speed Upgrade2
19K4630
Netfinity 866MHz 133 FSB/256KB Upgrade with Pentium III Processor
6xY
1 ... 5xY
19K4631
Netfinity 933MHz 133 FSB/256KB Upgrade with Pentium III Processor
7xY
1 ... 6xY
19K4640
1GHz Upgrade with 133MHz FSB and 256KB Advanced Transfer Cache
Pentium III Processor
8xY
-
1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of two processors may be installed. All processors must be identical in type, speed and cache size. Upgrades may require a
BIOS update. To obtain the latest Flash BIOS, access www.pc.ibm.com/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
38
RDIMM Socket 1 (J4)
RDIMM Socket 2 (J3)
Quantity of RDIMMs Added
256MB
(1 x 256)
Models
Install largest RDIMM in
socket 4 (J1) with
subsequent RDIMMs in
the following order: J4,
J3, J2.
RDIMM Socket 3 (J2)
RDIMM Socket 4 (J1) Std RDIMM
Total
Memory1
128MB
(33L3058)
256MB
(33L3060)
512MB
(33L3062)
1GB
(33L3064)
-
384MB
1
-
-
512MB
2 or
1
-
-
640MB
3
-
-
-
768MB
-
2 or
1
-
1024MB
-
3
-
-
1280MB
-
-
2 or
1
1792MB
-
-
3
-
2048MB
-
-
42
-
2304MB
-
-
-
2
3328MB
-
-
-
3
4096MB (max)
-
-
-
42
This table does not represent all possible memory configurations.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating
system specifications for further information.
2. Requires removal of standard memory.
Memory Description1
Part
Number
33L3058
128MB, 133MHz SDRAM ECC RDIMM
33L3060
256MB, 133MHz SDRAM ECC RDIMM
33L3062
512MB, 133MHz SDRAM ECC RDIMM
33L3064
1GB, 133MHz SDRAM ECC RDIMM
1. Install largest RDIMM in socket 4 (J1) with subsequent RDIMMs in the
following order: J4, J3, J2.
xSeries 240 / Netfinity 5600 Hard Disk Drive (HDD) and External Storage
Total Int
Storage1
7200RPM HDDs
10,000RPM HDDs
15,000RPM HDDs
9.1GB
18.2GB
36.4GB
9.1GB
18.2GB
36.4GB
9.1GB
18.2GB
(37L7201)2
(37L7202)2
(37L7203)2
(37L7204)2
(37L7205)2
(37L7206)2
(19K0655)2
(19K0656)2
9.1GB
1
-
-
1
-
-
1
-
18.2GB
2
1
-
2
1
-
2
1
0GB
Standard on base models
27.3GB
3
-
-
3
-
-
3
-
36.4GB
4
2
1
4
2
1
4
2
45.5GB
5
-
-
5
-
-
5
-
54.6GB
6
3
-
6
3
-
6
3
72.8GB
-
4
2
-
4
2
-
4
91GB
-
5
-
-
5
-
-
5
109.2GB
-
6
3
-
6
3
-
6
145.6GB
-
-
4
-
-
4
-
-
182GB
-
-
5
-
-
5
-
-
218.4GB
(max)
-
-
6
-
-
6
-
-
This table does not represent all possible HDD configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal Storage listed is
within +/- 0.2GB unless otherwise noted.
2. Netfinity 5600 contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus speeds.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
39
IBM XSERIES 240 /
NETFINITY 5600
xSeries 240 / Netfinity 5600 Memory
Bay
Form
Factor
Height
Front
Access
Usage
A
133mm
(5.25in)
HH1
Yes
Open
B
133mm
(5.25in)
HH1
Yes
Open
-
133mm
(5.25in)
HH
Yes
-
89mm
(3.5in)
SL
C ... H
HS
SL2
Diskette
Hot-Swap
C ... H
6
IDE CDROM
37L7202 18.2GB Ultra160 SCSI Hot-Swap SL HDD
7200
SL
C ... H
6
Yes
Diskette
37L7203 36.4GB Ultra160 SCSI Hot-Swap SL HDD
7200
SL
C ... H
6
Yes
Open
For clarity purposes, bay labels in
these diagrams are for reference
by the accompanying tables and
are not the actual labels. Refer to
the documentation shipped with
the system for further details on
actual labels.
(HS)
D
Removable Media (RM)
Rack Model View
E
A
B
F
37L7204
9.1GB 10K-4 Ultra160 SCSI Hot-Swap SL
HDD
10,000
SL
C ... H
6
37L7205
18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL
HDD
10,000
SL
C ... H
6
37L7206
36.4GB 10-K Ultra160 SCSI Hot-Swap SL
HDD
10,000
SL
C ... H
6
15,000
SL
C ... H
6
15,000
SL
C ... H
6
-
A+B
1
19K0656
18.2GB 15K-rpm Ultra160 SCSI Hot-Swap
HDD
Associated Options
10K2340 Media Bay Tray and LVD Cable Kit2
-
Ext Storage Expansion Units3 Form Factor
35311RU EXP300 Storage Expansion Unit4
09N7296 EXP300 Rack-to-Tower Conversion Kit
Rack (3U)
-
35601RU FAStT EXP500 Storage Expansion Unit5
Rack (3U)
35421RU FAStT200 Storage Server6, 7
Rack (3U)
35422RU FAStT200 HA Storage Server6
Rack (3U)
19K1121 FAStT200 Redundant RAID Controller
-
CD-ROM
G
H
Ultra160 Hard Disk Drives (HDD)1
9.1GB 15K-rpm Ultra160 SCSI Hot-Swap
19K0655
HDD
C
Bays
Max
Supported Qty
SL
Removable Media (RM)
CD-ROM
RPM Height
7200
Tower Model
B
Description
37L7201 9.1GB Ultra160 SCSI Hot-Swap SL HDD
1. Two half-high (HH) bays can be combined to support a single fullhigh (FH) device
2. Two slim-line (SL) bays can be combined to support a single halfhigh (HH) device.
A
P/N
H G
F E
D
C
Diskette
1. xSeries 240 / Netfinity 5600 contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus
speeds.
2. Media Bay Tray and LVD Cable Kit (P/N 10K2340) contains a two-drop terminated LVD SCSI cable and the
hardware required to convert two half-high 5.25in removable media bays into two nonhot-swap 7200RPM HDD bays.
3. Not supported by the onboard external SCSI port. To configure a SCSI storage device, select an optional SCSI
controller then refer to Appendix D: Cables - Storage Units - Controllers to confirm the controller supports the
desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options,
see the specific expansion unit section. For Fibre Channel storage devices, refer to the Fibre Array Solutions section.
4. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each with its
own power cord. To convert an EXP300 to a tower form factor, Netfinity EXP300 Rack-to-Tower Conversion Kit (P/N
09N7296) is required.
5. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each with
its own power cord.
6. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power
cord.
7. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller
(P/N 19K1121).
xSeries 240 / Netfinity 5600 Internal SCSI Cabling
The xSeries 240 and Netfinity 5600 contain a backplane supporting six hot-swap drive bays. The backplane is connected to the integrated dual channel, wide Ultra2
SCSI controller connector through a 16-bit LVD SCSI cable. If internal RAID support is required, this cable can be used to connect to a supported RAID adapter rather
than the integrated SCSI controller. A two-drop, 16-bit SCSI cable with integrated terminator is also included with the server to support up to two internal removable
media devices. This cable can be attached to the integrated SCSI controller if a RAID adapter is used to support the internal hot-swap drive bays. It can also be used
to attach to a supported SCSI adapter if the integrated Ultra2 SCSI controller is utilized for the hot-swap bays. The second channel is available
through an industry-standard 0.8mm Very High Density Connector Interface (VHDCI) located on the rear panel for external use.
40
xSeries 240 / Netfinity 5600 I/O Options
Description
Adapter
Length
PCI
Support
Slots
HotSupported Plug2
IBM XSERIES 240 /
NETFINITY 5600
Part
Number
Storage Controllers1
37L6091
ServeRAID-4L Ultra160 SCSI Controller3
Full
32/64-bit
1 ... 5
X
37L6080
ServeRAID-4M Ultra160 SCSI Controller4
Full
32/64-bit
1 ... 5
X
37L6889
ServeRAID-4H Ultra160 SCSI Controller5
Full
32/64-bit
1 ... 5
X
19K4646
PCI Wide Ultra160 SCSI Adapter6
Half
32/64-bit
1 ... 5
-
02K3454
PCI Fast/Wide Ultra SCSI Adapter
Half
32-bit
1 ... 5
-
Fibre Storage Controllers and Options7
X
-
-
35421RU
FAStT200 Storage Server
-
-
-
-
35422RU
FAStT200 HA Storage Server
-
-
-
-
35341RU
SAN Fibre Channel Managed Hub
-
-
-
-
2109S08
SAN Fibre Channel Switch, 8-Port
-
-
-
-
2109S16
SAN Fibre Channel Switch, 16-Port
-
-
-
-
2108R3L
SAN Data Gateway Router UltraSCSI LVD Port8
-
-
-
-
Networking9
Ethernet
09N9901
10/100 EtherLink Server Adapter by 3Com
Half
32-bit
1 ... 5
X
34L4601
Netfinity 10/100 Ethernet Security Adapter
Half
32/64-bit
1 ... 5
X
X
19K4401
Netfinity Gigabit Ethernet Adapter (copper)
Half
32/64-bit
1 ... 5
06P3601
10/100 Ethernet Server Adapter
Half
32-bit
1 ... 5
X
06P3701
Gigabit Ethernet SX Server Adapter (fiber)
Half
32/64-bit
1 ... 5
X
X
Rack Model
Slot 1- PCI, 32-bit, Full Length
1 ... 5
-
Slot 2- PCI, 32-bit, Full Length
32/64-bit
-
Slot 3- PCI, Hot-Plug, 32/64-bit, Full Length
Half
Slot 4- PCI, Hot-Plug, 32/64-bit, Full Length
Netfinity FAStT Host Adapter
FAStT500 Storage Server
Slot 5- PCI, Hot-Plug, 32/64-bit, Full Length
00N6881
35521RU
Token Ring
34L5001
16/4 Token-Ring PCI Management Adapter10
Half
32-bit
1 ... 5
34L5201
High-Speed 100/16/4 Token-Ring PCI Management Adapter10
Half
32-bit
1 ... 5
X
34L0701
Token-Ring 16/4 PCI Adapter 2 with Wake on LAN10
Half
32-bit
1 ... 5
X
Communications11
33L4618
PCI V.90 56K Data/Fax Modem12
Half
32-bit
1 ... 5
-
37L14xx
Serial I/O SST 8, 16 and 128 Port Adapters13
Half
32-bit
1 ... 513
-
Systems Management14
01K7209
Netfinity Advanced System Management PCI Adapter15
Full
32-bit
1 ... 516
-
03K9309
Netfinity Advanced System Management Interconnect Cable Kit17
-
-
-
-
36L9654
Netfinity Advanced System Management Token-RIng Connection18
-
-
-
-
Full
32-bit
1 ... 520
-
Host Attach
9086001
Netfinity ESCON Adapter19
1. xSeries 240 / Netfinity 5600 has two integrated Wide Ultra2 SCSI channels. One is internal and the other is external with a 0.8mm Very High Density Connection
Interface (VHDCI).
2. Three of the five PCI slots are 32/64-bit Hot-Plug capable using IBM’s Active™ PCI technology. For Network Operating System support, access
www.pc.ibm.com/us/compat.
3. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides a single channel, 16MB of ECC cache and either one
internal or one external Ultra160 connection. External connectors are 0.8mm VHDCI.
4. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides two channels, 64MB of battery-backed ECC cache and two
internal and two external Ultra160 connectors (only two connectors may be utilized). External connectors are 0.8mm VHDCI.
5. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266MHz PowerPC 750 processor and provides 128MB of battery-backed ECC cache with two internal
and up to four external Ultra160 connectors (only four connectors may be utilized). External connectors are 0.8mm VHDCI.
6. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable
and one external connector with a 0.8mm VHDCI connector. Only one of the two connectors may be utilized.
7. See Netfinity Fibre Array Solutions section for additional configuration information.
8. The 2108R3L SAN Data Gateway Router UltraSCSI LVD port replaces both the Single-ended and Differential SAN Data Gateway Routers (P/N 2108R3D and
2108R3S).
9. xSeries 240 / Netfinity 5600 has an integrated 10/100 PCI Ethernet Controller.
10. The Wake on LAN function of this option is not supported by this server.
!1. xSeries 240 / Netfinity 5600 includes two USB ports, three high-speed serial/asynchronous ports (two NS16550A compatible, one for the Advanced System
Management Processor) and one high-speed (up to 2MB/sec data transfer speed) bidirectional parallel port supporting devices using ECP/EPP/SSP protocols
adhering to the IEEE1284 standard.
12. Due to homologation variances, modem availability may differ by country.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
41
13. See Appendix E for details on Serial I/O options and configuration limitations. A maximum of four Serial I/O adapters (any combination of P/Ns 37L1414,
37L1415, 37L1416, 37L1423) may be installed.
14. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into xSeries 240 / Netfinity 5600 works with Netfinity Director to
provide significant system management function. When used with optional Netfinity Advanced System Management PCI Adapter (P/N 01K7209) and Netfinity
Advanced System Management Interconnect Cable Kit (P/N 03K9309), additional management and control of up to 12 service processors from a remote console
through a single modem or LAN connection is possible.
15. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56W AC adapter that requires a separate power
source. Provides an integrated 10/100 Ethernet port and PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection (P/N
36L9654).
16. A maximum quantity of one is supported.
17. Required for all xSeries and Netfinity servers containing a standard Advanced System Management Processor that are to be interconnected for system
management support through a LAN or modem connection. Optional Netfinity Advanced System Management PCI Adapter (P/N 01K7209) includes the contents
of this option. Up to 12 service processors may be interconnected (including standard and optional processors) with an aggregate connection length of no more
than 91.4m (300ft). A customer-supplied Ethernet cable is required for each interconnection.
18. Contains an IBM Turbo 16/4 Token-Ring PCI Card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter (P/N
01K7209), and a PC Card to 9-pin D-Shell cable, which is routed to a rear chassis cut-out. The Netfinity Advanced System Management PCI Adapter integrated
Ethernet port and Netfinity Advanced System Management Token-Ring Connection cannot be connected or used together.
19. Provides an ESCON MIC and DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for
additional information.
20. A maximum of two 9086001 adapters (installed in nonadjacent slots) are supported in a single server.
xSeries 240 / Netfinity 5600 Power, Monitor & Accessories
Part Number
Description
Power1
33L3760
250W Hot-Swap Redundant Power Supply
94G3135
APC Smart-UPS 1000
Uninterruptible Power Supply (UPS)2
94G3136
APC Smart-UPS 1400
94G6674
APC Smart-UPS 1400RMB3
94G6676
APC Smart-UPS 3000RMB3
37L6861
APC Smart-UPS 5000RMB4
Monitors5
633347N
E51 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6331N2N
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6332J1N
E74 Color Monitor 17in (403mm, 15.9in Viewable Image Size), stealth black6
66274AN
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black6
9511AG1
T54A TFT LCD Color Monitor (306mm x 230mm, 15in Viewable), stealth black7
1. xSeries 240 / Netfinity 5600 include two 250W hot-swap power supplies, each with its own power cord. These standard
power supplies are sufficient to operate fully configured systems; however, optional 250W Hot-Swap Redundant Power
Supply (P/N 33L3760) is required to preserve redundancy if any of the following are exceeded:
Single Processor Configuration
- Six SL HDDs and two PCI adapters
(1 HH HDD = 2 SL, 1 tape = 2 SL, 1 PCI adapter = 2 SL)
E.g., to preserve power supply redundancy with three PCI adapters, only four SL HDDs can be installed before an
optional power supply is required.
Dual Processor Configuration
- Four SL HDDs and two PCI adapters
(1 HH HDD = 2 SL, 1 tape = 2 SL, 1 PCI adapter = 2 SL)
A “nonredundant” LED on the system unit will indicate when 250W has been exceeded. 250W Hot-Swap Redundant
Power Supply (P/N 33L3760) includes a power cord which requires an additional power source. An independent power
source such as a second UPS or second circuit is not required.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. xSeries 240 / Netfinity 5600 use an SVGA controller (S3 Trio 3D chipset) with 4MB of video memory.
6. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity
Rack Keyboard Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
42
Part Number
Description
37L6858
IBM XSERIES 240 /
NETFINITY 5600
Conversion Kits
5Ux24D Tower-to-Rack Kit
Rack and NetBAY1
930842P
Netfinity Enterprise Rack
930842X
Netfinity Enterprise Expansion Cabinet
9306900
Netfinity Rack
9306910
Netfinity Rack (includes perforated front door)
9306200
Netfinity NetBAY22
Keyboard and Mouse2
28L3644
Space Saver II Keyboard3, 5
01K1260
TrackPoint IV 104-Key Black Keyboard4,5
28L3621
Preferred Keyboard (stealth black)4
28L3673
Sleek 2-Button Stealth Black Mouse
1. xSeries 240 / Netfinity 5600 rack models are housed in a 19in rack mountable drawer and require one of the
racks listed here. See IBM Netfinity Rack Cabinet and Options section for IBM rack supported devices.
2. Tower models include both a mouse and a keyboard. Rack models include neither.
3. Installation within a rack requires optional keyboard tray( P/N 28L4707) (stows in ready-to-use position).
4. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a
keyboard tray with a flat panel display.
5. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
xSeries 240 / Netfinity 5600 Tape Options
Part
Number
Bays
Supported
Tape Drives
1
SCSI
Interface
(bit)
09N4042
10/20GB NS Internal SCSI Tape Drive
A, B
8
00N7991
20/40GB DDS/4 4mm Internal Tape Drive2
A, B
16 Ultra2 LVD
09N4040
20/40GB DLT Internal SCSI Tape Drive1
A+B
8
00N7990
40/80GB DLT Internal SCSI Tape Drive2
A+B
16 Ultra2 LVD
00N8017
60/120GB 8mm M2 SCSI Tape Drive2
A, B
16 Ultra2 LVD
00N8016
100/200GB LTO Tape Drive2
A+B
16 Ultra2 LVD
3502108
DLT Tape Autoloader
N/A
16
00N7992
120/240GB DDS/4 Tape Autoloader2
A+B
16 Ultra2 LVD
Form Termination
Factor
Included
89mm
(3.5in) SL
or 133mm
(5.25in)
HH
89mm
(3.5in) HH
or 133mm
(5.25in)
HH
133mm
(5.25in) FH
133mm
(5.25in) FH
133mm
(5.25in)
HH
133mm
(5.25in) FH
68/50-pin
Converter
Incl
Ext Tape
Enclosures
Y
Y
3510020
N
N/A
35100204,
35510013
N
Y
N
N/A
N
N/A
35100204,
35510013
N
N/A
35510013
Y
-
-
N
N/A
35510013
3503B0X4,
3551001
3503B0X4,
35510013
Tape Autoloaders
Desktop
133mm
(5.25in) FH
External Tape Libraries5
Y
-
-
Diff
Desktop or
Rack
6U Rack
Y
N/A
-
-
8/16
16
16
16 LVD
Desktop
Desktop
Rack
-
N
N
Y
N
N
N
N
N
3551001
-
16 LVD/SE
Ext
Y
N
-
16 LVD
Int
Y
N
3502x14
DLT Tape Library
-
16
3570C2X
Magstar MP 3570 Tape Subsystem
-
External Tape Enclosures
3510020
3503B0X
3551001
10L7113
External Half-High SCSI Storage Enclosure6
DLT External SCSI Enclosure7
NetMEDIA Storage Expansion Unit EL8
NetMEDIA Systems Management Adapter9
Associated Options
00N7956
10K2340
68-pin External Multimode LVD/SE SCSI
Terminator
Media BayTray and LVD Cable Kit2, 3
Updated 03/22/01
3510020,
3503B0X
3551001
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
43
Note: Netfinity 5600 includes a wide two-drop single-ended terminated cable which can be used for attachment of internal tape drives to the onboard Ultra2 controller when the hot-swap
backplane is attached to a RAID controller. If LVD support is required, an optional LVD cable must be ordered. An external Ultra2 SCSI port is available with a 0.8mm VHDCI connector.
External tape enclosures are supported by the standard external SCSI port or PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which has an external 0.8mm VHDCI connector.
1. Non-RAID Configurations: Requires PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which contains a five-drop multi-mode terminated LVD SCSI cable.
2. RAID configurations: Configurations where the hot-swap backplane is cabled to a RAID controller, require the two-drop multi-mode terminated LVD SCSI cable included with Media Bay Tray
and LVD Cable Kit (P/N 10K2340) for support of LVD devices in LVD mode. Use of the included single-ended terminated cable with an LVD device will be limited to single-ended SCSI rules.
3. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) requires replacement of the standard single-ended internal cables with one or more
(depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop mult-mode terminated cable. If the standard cables are used for
attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
4. Requires 68-pin External Multimode LVD/SE SCSI terminator (P/N 00N7956).
5. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
6. Provides a black desktop 133mm (5.25in) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination
or 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
7. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI
terminator (P/N 00N7956).
8. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, 19in rack mountable tape enclosure which includes two full-high (FH) or four half-high (HH) extended length 133mm
(5.25in) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power
cords are also included. Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a 930842x rack.
9. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a 3551001 to provide repeater function, LVDS interface, aggregate cable lengths up to 12m when attached to an
LVD SCSI controller, and auto-termination when the 3551001 is powered off. External connector is 0.8mm VHDCI.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
xSeries 240 / Netfinity 5600 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or
IBM Marketing Representative for assistance with your specific configuration requirements.
High Availability Application Server
Part Number
8664-71Y
33L3060
37L7201
37L7205
00N8017
10K2340
37L6091
33L3760
6331N2N
94G3135
Description
Quantity
Usage
1
1
2
41
1
1
1
1
1
1
512MB total system memory
9.1GB mirrored for NOS
RAID 5
Full power redundancy
Netfinity 5600 933MHz/256KB, 256MB ECC, Open, 40X, PCI
256MB, 133MHz SDRAM ECC RDIMM
9.1GB Ultra160 SCSI Hot-Swap SL HDD
18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
60/120GB 8mm M2 SCSI Tape Drive
Media Bay Tray and LVD Cable Kit
ServeRAID-4L Ultra160 SCSI Controller
250W Hot-Swap Redundant Power Supply
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
APC Smart-UPS 1000
UPS
1. Four HDDs are used for RAID 5 protection. Effective capacity is three HDDs or 54.6GB
This tower server is configured to act as the foundation for business critical applications your business cannot afford to be without. Configured with enough HDD
storage to mirror the operating system and provide a standard RAID 5 environment for data, optional hot-swap redundant power and UPS for power even during a
blackout, this server represents the leading edge in high availability. An internal tape drive is included to back up that all important asset--data. A modem could be
included to allow out-of-band (non-LAN) system management utilizing the integrated Netfinity Advanced System Management Processor.
High Availability File Server
Part Number
8664-81Y
37L7204
00N8017
10K2340
37L6889
33L3760
6331N2N
94G3135
Description
Quantity
Usage
1
61
1
1
1
1
RAID 5 array, with hot-spare
Full power redundancy
xSeries 240 1GHz/256KB, 256MB ECC, Open, 40X, PCI
9.1GB 10K-4 Ultra2 SCSI Hot-Swap SL HDD
60/120GB 8mm M2 SCSI Tape Drive
Media Bay Tray and LVD Cable Kit
ServeRAID-4H Ultra160 SCSI Controller
250W Hot-Swap Redundant Power Supply
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth
black
APC Smart-UPS 1000
1
-
1
-
1. Six HDDs are used for RAID 5 protection. One HDD is identified as a hot-spare. Effective capacity is four HDDs or 36.4GB
This tower model is configured to meet the need of server consolidation. Many businesses are trying to get their arms around the dispersed departmental servers
that have grown up around the enterprise. By moving multiple servers onto one platform there is only one system to manage both hardware and software. There is
potentially less expense for service, software licenses, etc., and there is less concern about single points of failure because the xSeries240 is designed for high
availability. This configuration includes RAID-protected internal storage, a third power supply which provides fully redundant power, a UPS to help protect the system
against a momentary electricity loss, and an internal tape drive that backs up as much as 40GB per tape in addition to all the standard features of the xSeries 240.
44
IBM XSERIES 240 /
NETFINITY 5600
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
45
IBM xSeries 250
x)
or
)
s)
il) a
ss
ID
d)
an
vatd/M
x)
r
e
A
F
a
A
a
c
/
,
d
o
,R
/M
al (S
DD
Pr
an
td
ot ive
tra
2
(TD
r
(S
, H l, St
nt ps)
Ul
RD
s
e
) rs (
s
y
,
t
b
t
z
l
y
=
m
a
ti
a isk
lo
na
R
g e t (M (D u
MH sso
io
an
,S
)(
aBD
)
pt
n a r ne
er
d ( oce
il)
r
d i ar d
Qu
ax
a
e
O
e
w
e
(
ail
e
l
)
e
y
e
va
r
M
M th
l
o
r
l
/
Ml H
ro
(P
/Av al/A
cy
or u p p
Sp of P ach
td
DE
m
e
be
l
t
t
E
I
a
l
n
e
S
r
(
p
a
n
c
(
m
a
t
o
ot
st ard
ab r n
so ber CC C
Fa er S
wa und
ry
Nu
(To s (T
ov nte
Sy
IC
OM
o
es
-S
m
rt
mo
-R
ot
ys
ed
CS
oc Num L2 E
dv Onb
ot
em I
or Pow
e
l
D
r
a
H
R
Pa
F
S
A
R
S
P
C
M
B
)
ax
d/M
t
S
3
M)
IM
8665-61Y
700
1/4
1MB
512MB(R)/16GB
Tower
2/4
P, S,
H, F
S-Fans
O-Power4
Y 10/100
D,U2
4/2
0/364GB
48X-205
14/12
6/6
8665-6RY1
700
1/4
1MB
512MB(R)/16GB
Rack
(8U)
2/4
P, S,
H, F
S-Fans
O-Power4
Y 10/100
D,U2
4/2
0/364GB
48X-205
14/12
6/6
8665-71Y
700
1/4
2MB
512MB(R)/16GB
Tower
2/4
P, S,
H, F
S-Fans
O-Power4
Y 10/100
D,U2
4/2
0/364GB
48X-205
14/12
6/6
8665-7RY1
700
1/4
2MB
512MB(R)/16GB
Rack
(8U)
2/4
P, S,
H, F
S-Fans
O-Power4
Y 10/100
D,U2
4/2
0/364GB
48X-205
14/12
6/6
8665-81Y
900
1/4
2MB
512MB(R)/16GB
Tower
2/4
P, S,
H, F
S-Fans
O-Power4
Y 10/100
D,U2
4/2
0/364GB
48X-205
14/12
6/6
8665-8RY1
900
1/4
2MB
512MB(R)/16GB
Rack
(8U)
2/4
P, S,
H, F
S-Fans
O-Power4
Y 10/100
D,U2
4/2
0/364GB
48X-205
14/12
6/6
1. Housed in a 19in rack-mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “xSeries 250 Power, Monitor & Accessories” for
supported IBM racks.
2. Intel Pentium III Xeon processor with advanced transfer (full speed) L2 cache and 100MHz access to memory and I/O buses.
3. Advanced Chipkill ECC memory corrects two-, three-, and four-bit memory errors.
4. Robust configurations may require optional 250W Hot-Swap Redundant Power Supply (P/N 33L3760) for redundancy. See “Power” under Netfinity 7600 Power, Monitor &
Accessories” for additional information.
5. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
Netfinity xSeries 250 Processor Upgrades
Part
Number
Processor Upgrades with Full Speed Cache
SMP
Support1
Processor
Speed Upgrade2
10K2331
Netfinity 700MHz/1MB Upgrade II with Pentium III Xeon Processor
61Y, 6RY
-
10K2332
Netfinity 700MHz/2MB Upgrade II with Pentium III Xeon Processor
71Y, 7RY
61Y, 6RY
19K4635
xSeries 250 900MHz/2MB Upgrade with Pentium III Xeon Processor
81Y, 8RY
6 ,,, 7xY
1. Three additional processors may be installed, providing a maximum of four. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of four processors may be installed. All processors must be identical in type, speed and cache size.
Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.pc.ibm.com/support and enter machine “Type-Model” in Quick Path. Select
“Downloadable files” and then “BIOS.”
46
Netfinity xSeries 250 Memory
Set 1-J1
Set 2-J2
Set 3-J3
Set 4-J4
Std RDIMM
Set 1-J5
Set 2-J6
Set 3-J7
Set 4-J8
Std RDIMM
Set 1-J9
Set 2-J10
Set 3-J11
Set 4-J12
Std RDIMM
Set 1-J13
Set 2-J14
Set 3-J15
Set 4-J16
Std RDIMM
128MB
(33L3113)
256MB
(33L3115)
512MB
(33L3117)4
1GB
(33L3119)
512MB
4 x 128
RDIMMs
standard
-
-
-
1GB
4
-
-
-
1.5GB
-
4
-
-
2GB
4
4
-
-
2.5GB
-
8
-
-
3GB
4
-
4
-
4GB
4
4
4
-
5GB
4
-
8
-
size, but all the sets do not have to contain RDIMMs
6GB3
-
8
8
-
of the same size. Install RDIMM sets in numerical
7GB3
-
4
12
-
sequence from one to four.
8GB3
-
-
16
-
All RDIMMs installed in each set must be the same
9GB
4
-
-
8
10GB3
-
-
12
4
12GB3
-
-
8
8
14GB3
-
-
4
12
16GB3 (max)
-
-
-
16
IBM XSERIES 250
Quantity of RDIMMs Added2
Total
Memory1
This table does not represent all possible memory configurations. Memory modules may vary in price per
MB. Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating
system specifications for further information.
2. To obtain the Quantity of memory identified in the “Total Memory” column, select the appropriate row
and order the quantity of RDIMMs identified in all columns for that row. Example: For 2GB, order 4 x
33L3113 plus 4 x 33l3115.
3. Requires removal of standard RDIMMs.
4. The 2GB memory option (P/N 33L3147), each of which includes four 512MB RDIMMs, can be
substituted for a quantity of four 512MB (P/N 33L3117) RDIMMs.
Part
Number
33L3113
Memory Description1
Netfinity 128MB, 100MHz ECC SDRAM RDIMM
33L3115
Netfinity 256MB, 100MHz ECC SDRAM RDIMM
33L3117
Netfinity 512MB, 100MHz ECC SDRAM RDIMM2
33L3119
Netfinity 1GB 100MHz ECC SDRAM RDIMM
33L3147
2GB 100MHz ECC SDRAM RDIMM Kit (4 x 512MB)2
1. Due to four-way interleaving all RDIMMs installed in each set must be the same size, but all the sets do
not have to contain RDIMMs of the same size. Memory must be installed in sets of four identical RDIMMs
(example: quantity four of 33L3113). Install RDIMM sets in numerical sequence from Set 1 to Set 4. Chipkill
support is provided on the memory card.
2. Due to the new technology used by the 512MB RDIMMs contained in P/N 33L3147, they should not be
mixed within a set with Netfinity 512MB 100MHz ECC SDRAM RDIMM (P/N 33L3117).
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
47
Netfinity xSeries 250 Hard Disk Drive (HDD) Storage
Total Int
Storage1
7200RPM HDDs
9.1GB
18.2GB
10,000RPM HDDs
36.4GB
9.1GB
18.2GB
15,000RPM HDDs
36.4GB
9.1GB
18.2GB
(37L7201)2 (37L7202)2 (37L7203)2 (37L7204)2 (37L7205)2 (37L7206)2 (19K0655)2 (19K0656)2
0GB
Standard on base models
9.1GB
1
-
-
1
-
-
1
-
18.2GB
2
1
-
2
1
-
2
1
27.3GB
3
-
-
3
-
-
3
-
36.4GB
4
2
1
4
2
1
4
2
45.5GB
5
-
-
5
-
-
5
-
54.6GB
6
3
-
6
3
-
6
3
63.7GB
7
-
-
7
-
-
7
-
72.8GB
8
4
2
8
4
2
8
4
81.9GB
9
-
-
9
-
-
9
-
91GB
10
5
-
10
5
-
10
5
109.2GB
-
6
3
-
6
3
-
6
127.4GB
-
7
-
-
7
-
-
7
145.6GB
-
8
4
-
8
4
-
8
163.8GB
-
9
-
-
9
-
-
9
182GB
-
10
5
-
10
5
-
10
218.4GB
-
-
6
-
-
6
-
-
254.8GB
-
-
7
-
-
7
-
-
291.2GB
-
-
8
-
-
8
-
-
327.6GB
-
-
9
-
-
9
-
-
364GB (max)
-
-
10
-
-
10
-
-
This table does not represent all possible HDD configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal Storage
listed is within +/- 0.2GB unless otherwise noted.
2. xSeries 250 ships standard with an Ultra2 SCSI storage controller. The standard backplane supports Ultra160 HDDs at Ultra2 speeds
(80Mbps) when connected to the standard integrated storage controller or at Ultra160 speeds (160Mbps) with the addition of an optional
Ultra160 storage controller.
48
Form
Factor
Height
Front
Access
Usage
Part
Number
Description
RPM
Height
Bays
Supported
Max
Qty
Ultra160 HDDs1
-
89mm
(3.5in)
SL
Yes
Diskette
-
133mm
(5.25in)
HH
Yes
IDE CDROM
37L7201
9.1GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
See diagram
10
RM 1
133mm
(5.25in)
HH1
Yes
Open
37L7202
18.2GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
See diagram
10
RM 2
133mm
(5.25in)
HH1
Yes
Open
37L7203
36.4GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
See diagram
10
1 ... 10
HS
SL
Yes
Open
37L7204
9.1GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
See diagram
10
NB32
19in Rack
3U
Yes
Open
37L7205
18.2GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
See diagram
10
37L7206
36.4GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
See diagram
10
19K0655
9.1GB 15Krpm Ultra160 SCSI HotSwap HDD
15,000
SL
See diagram
10
19K0656
18.2GB 15Krpm Ultra160 SCSI
Hot-Swap HDD
15,000
SL
See diagram
10
37L7086
xSeries Ultra160 SCSI Repeater
Card2
-
-
-
1
1. Two half-high (HH) bays can be combined to support a single fullhigh (FH) device
2. Tower configured systems support installation of up to three
NetBAY3s. See IBM Netfinity NetBAY3 Stackable Enclosure section for
supported devices.
Associated Options
SL
0
Removable
Media (RM)
Bays
1
3
4
5
Diskette
CD-ROM
11
12
Hot-Swap (HS)
Bays 10 x SL
(SCSI IDs
shown)
IBM XSERIES 250
Bay
External Storage
Expansion Units2, 3
Form Factor
35311RU
EXP300 Storage Expansion Unit4
Rack (3U)
09N7296
EXP300 Rack-to-Tower
Conversion Kit
35601RU
FAStT EXP500 Storage Expansion
Unit5
Rack (3U)
35421RU
FAStT200 Storage Server6, 7
Rack (3U)
35422RU FAStT200 HA Storage Server6
19K1121
FAStT200 Redundant RAID
Controller
-
Rack (3U)
-
13
1. xSeries 250 contains an Ultra2 hot-swap, split backplane which supports Ultra160 HDDs at Ultra2 bus speeds
Bay 1
when connected to the standard integrated storage controller. Ultra160 bus speeds are supported with the
14
addition of an optional Ultra160 storage controller.
2. xSeries Ultra160 SCSI Repeater Card kit includes a jumper cable and installation hardware. This option is
Bay 2
15
used to convert the standard split backplane into a single SCSI channel supporting up to 10 HDDs.
3. To configure a SCSI storage device, select an optional SCSI controller then refer to Appendix D: Cables Netfinity NetBAY3 (NB3)
Storage Units - Controllers to confirm the controller supports the desired External Storage Expansion Unit and to
select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section. For
(Optional on Tower Configurations)
Fibre Channel storage devices, refer to the Fibre Array Solutions section.
4. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W power supplies, each with its own
All bays are SL. Bus A includes the top five bays supported by the
standard integrated Ultra2 SCSI controller connected by a standard 16- power cord. To convert an EXP300 to a tower form factor, Netfinity EXP300 Rack-to-Tower Conversion Kit (P/N
bit LVDS cable. Bus B includes the lower five bays. For clarity, the SCSI 09N7296) is required.
5. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each
IDs are identified.
with its own power cord.
6.The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power
cord.
7. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID
Controller (P/N 19K1121).
xSeries 250 Internal SCSI Cabling
The xSeries 250 contains a hot-swap backplane architected into two backplanes, each containing five drives. This split backplane supports a total of 10 hot-swap
SCA-2 compliant drives. One of the backplanes is connected to one of the internal connectors of the standard Ultra2 SCSI controller through a 16-bit LVDS cable.
Another 16-bit LVDS cable is connected to the other backplane connector; however, this cable is left disconnected at the other end. The standard configuration
allows support of five drives from the standard SCSI controller. If additional drive bays are needed, an optional xSeries Ultra160 SCSI Repeater Card
(P/N 37L7086) must be installed to connect both backplanes into a single channel, 10-bay configuration. The repeater card is shipped with a jumper cable and
installation hardware. Channel A of the dual-channel, Wide Ultra2 SCSI controller only supports external SCSI attachment and is connected directly to an external
0.8mm VHDCI SCSI connector. To support SCSI devices in the internal 5.25in half-high bays, a two-drop, 16-bit LVD SCSI cable can be used to connect channel B of
the integrated Wide Ultra2 SCSI controller to SCSI devices in one or both of the removable media bays when an optional RAID controller is used to support the
internal hot-swap drive bays. If the standard SCSI controller is used to support the hot-swap drive bays, then an optional SCSI adapter is required to support
installation of devices in these 5.25/3.5in half-high bays. Most configurations for this class of server will generally incorporate an optional ServeRAID-4 Ultra160 SCSI
controller to support internal RAID protection. The split backplane of the xSeries 250 is optimized to support a two-channel ServeRAID controller to enhance
performance. Each backplane can be cabled to an internal connector of the RAID controller by removing the standard 16-bit LVDS cable from the Ultra2 SCSI
controller and attaching it to one of the RAID controller connections. The other standard 16-bit LVDS cable is attached to the remaining internal connector of the RAID
controller. In configurations where a single channel RAID array is required, an xSeries Ultra160 SCSI Repeater Card must be installed.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
49
xSeries 250 I/O Options
Part
Number
Description
Adapter
Length
PCI
Support
Slots
HotPCI
MHz
Supported1 Plug2 Voltage
Key
Storage Controllers3
37L6080
ServeRAID-4M Ultra160 SCSI Controller4
Full
32/64-bit
1 ... 67
X
Universal
37L6091
ServeRAID-4L Ultra160 SCSI
Controller5
Full
32/64-bit
1 ... 67
X
Universal
33
37L6889
ServeRAID-4H Ultra160 SCSI Controller6
Full
32/64-bit
1 ... 67
X
Universal
33
19K4646
PCI Wide Ultra160 SCSI Adapter8
Half
32/64-bit
1 ... 6
-
Universal
66
02K3454
PCI Fast/Wide Ultra SCSI Adapter
Half
32-bit
3 ... 6
-
5
33
33
Fiber Storage Controllers and Options9
00N6881
Netfinity FAStT Host Adapter
Half
32/64-bit
1 ... 6
X
Universal
66
35521RU
FAStT500 Storage Server
-
-
-
-
-
-
35421RU
FAStT200 Storage Server
-
-
-
-
-
-
35422RU
FAStT200 HA Storage Server
-
-
-
-
-
-
35341RU
SAN Fibre Channel Managed Hub
-
-
-
-
-
-
2109S08
SAN Fibre Channel Switch, 8-port
-
-
-
-
-
-
2109S16
SAN Fibre Channel Switch, 16-port
-
-
-
-
-
-
2108R3L
SAN Data Gateway Router Ultra SCSI LVD Port10
-
-
-
-
-
-
33
Networking11
Ethernet
09N9901
10/100 EtherLink Server Adapter by 3Com
Half
32-bit
1 ... 67
X
Universal
34L4601
Netfinity 10/100 Ethernet Security Adapter
Half
32/64-bit
1 ... 67
X
Universal
33
19K4401
Netfinity Gigabit Ethernet Adapter (copper)
Half
32/64-bit
1 ... 67
X
Universal
33
06P3601
10/100 Ethernet Server Adapter
Half
32-bit
1 ... 67
X
Universal
33
06P3701
Gigabit Ethernet SX Server Adapter (fiber)
Half
32/64-bit
1 ... 6
X
Universal
66
33
Token Ring
34L0701
Token-Ring 16/4 PCI Adapter 2 with Wake on LAN12
Half
32-bit
1 ... 67
X
Universal
34L5001
16/4 Token-Ring PCI Management Adapter12
Half
32-bit
1 ... 67
X
Universal
33
34L5201
High-Speed 100/16/4 Token-Ring PCI Management Adapter12
Half
32-bit
1 ... 67
X
Universal
33
Communications13
33L4618
PCI V.90 56 Data/Fax Modem14
Half
32-bit
3 ... 6
-
5
33
37L14xx
Serial I/O SST 8, 16, and 128 port adapters15
Half
32-bit
3 ... 6
-
5
33
Full
32-bit
3 ... 620
Systems Management16
01K7209
Netfinity Advanced System Management PCI Adapter17
-
5
33
03K9309
Netfinity Advanced System Management Interconnect Cable Kit
-
-
-
-
-
-
36L9654
Netfinity Advanced System Management Token-RIng Connection19
-
-
-
-
-
-
Full
32-bit
3 ... 622
-
5
33
18
Host Attach
9086001
Netfinity ESCON Adapter21
1. The 5V slots support Universal or 5V adapters. The 3.3V slots support universal or 3.3V adapters. A Universal keyed 66MHz adapter plugged into a 33MHz slot will operate at 33MHz. A
Universal keyed 33MHz adapter plugged into a 66MHz slot limits other adapters installed on the same bus to 33MHz.
2. Slots three through six include hot-plug capability using IBM’s Active PCI technology. For Network Operating System support access www.pc.ibm.com/us/compat.
3. All models include a dual-port, dual-channel, 64-bit Wide Ultra2 SCSI controller with one internal connector (connected to Channel A of the hot-swap split backplane) and one external
port with a 0.8mm Very High Density Connection Interface (VHDCI).
4. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides two channels, 64MB of battery-backed ECC cache and two internal and two external
Ultra160 connectors (only two connectors may be utilized). External connectors are 0.8mm VHDCI.
5. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides a single channel, 16MB of ECC cache and either one internal or one external Ultra160
connection. External connector is 0.8mm VHDCI.
6. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266MHz PowerPC 750 processor and provides 128MB of battery-backed ECC cache with two internal and up to four external
Ultra160 connectors (only four connectors may be utilized). External connectors are 0.8mm VHDCI.
7. Installation of a 33MHz adapter into a Bus A 66MHz slot will slow operation of all Bus A slots to 33MHz.
8. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector
with a 0.8mm VHDCI connector. Only one of the two connectors may be utilized.
9. See Netfinity Fibre Array Solutions section for additional configuration information.
10. The 2108R3L SAN Data Gateway Router Ultra SCSI LVD port replaces both the Single-ended and Differential SAN Data Gateway Routers (P/N 2108R3D and 2108R3S).
11. xSeries 250 includes a full-duplex, 10/100Mbps Ethernet PCI Controller.
12. The Wake-on LAN function of this option is not supported by this server.
50
13. xSeries 250 includes two USB ports, two high-speed serial/asynchronous ports (NS16550A compatible), and one high-speed (up to 2MB/sec data transfer speed) bidirectional parallel
port supporting devices using ECP/EPP/SSP protocols adhering to the IEEE 1284 standard.
14. Due to homologation variances, modem availability may differ by country.
15. See Appendix E for details on Serial I/O Options and configuration limitations.
16. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into xSeries 250 works with Netfinity Director to provide significant system management
function. When used with optional Netfinity Advanced System Management PCI Adapter (P/N 01K7209) and Netfinity Advanced System Management Interconnect Cable Kit (P/N 03K9309)
additional management and control of up to 12 service processors from a remote console through a single modem or LAN connection is possible.
17. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56W AC adapter which requires a separate power source. Provides an integrated
10/100 Ethernet port and PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection (P/N 36L9654).
18. Required for all Netfinity servers containing a standard Advanced System Management Processor that are to be interconnected for system management support through a LAN or
modem connection (Netfinity 5500 models 8660-1 ... 4xU are not supported). Up to 12 service processors may be interconnected (including standard and optional processors) with an
aggregate connection length of no more than 91.4m (300ft). A customer-supplied Ethernet cable is required for each interconnection.
19.Contains an IBM Turbo 16/4 Token-Ring PCI Card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter, and a PC Card to 9-pin D-Shell cable
which is routed to a rear chassis cut-out. The Netfinity Advanced System Management PCI Adapter’s integrated Ethernet port and Netfinity Advanced System Management Token-Ring
Connection cannot be connected or used together. To download the latest firmware, access www.pc.ibm.com/us/netfinity. Select “Server Support,” “Family,” “Model,” “Downloadable files,”
and finally “Advanced Systems Management.”
20. A maximum quantity of one is supported.
21. Provides an ESCON MIC and a DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.
22. A maximum of two 9086001 adapters (installed in nonadjacent slots) are supported in a single server.
Slot 1- Bus A- 66MHz- 3.3V or Universal
IBM XSERIES 250
Slot 2- Bus A- 66MHz- 3.3V or Universal
Slot 3- Bus B- 33MHz- 5V or Universal, Active PCI
Slot 4- Bus B- 33MHz- 5V or Universal, Active PCI
Slot 5- Bus B- 33MHz- 5V or Universal, Active PCI
Slot 6- Bus B- 33MHz- 5V or Universal, Active PCI
All Slots- Full Length, 64-bit
xSeries 250 Power, Monitor & Accessories
Part Number
Description
Power1
33L3760
250W Hot-Swap Redundant Power Supply
Uninterruptible Power Supply (UPS)2
94G3135
APC Smart-UPS 1000
94G3136
APC Smart-UPS 1400
94G6674
APC Smart-UPS 1400RMB3
94G6676
APC Smart-UPS 3000RMB3
37L6861
APC Smart-UPS 5000RMB4
Monitors5
633347N
E51 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6331N2N
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6332J1N
E74 Color Monitor 17in (403mm, 15.9in Viewable Image Size), stealth black6
66274AN
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black6
9511AG1
T54A TFT LCD Color Monitor (306mm x 230mm, 15in Viewable), stealth black7
1. xSeries 250 includes two 250W hot-swap redundant power supplies, with the ability to accept one additional 250W
Hot-Swap Redundant Power Supply (P/N 33L3760). Each power supply includes its own 9ft power cord for attachment to
a low voltage UPS, PDU or wall outlet. To assist in determining when an additional power supply is required to preserve
redundancy, a “Non-Redundant LED” is a standard feature of the Netfinity 7600. Predicting whether a particular
configuration will require an additional power supply for redundancy is very complex. However, once the system is
installed, the “Non-Redundant LED” will indicate when an additional power supply is required. The following sample
configuration is provided as a reference.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
51
Number of
Power Supplies
System Configuration Supported
Typical Redundant Configuration
4 x Processors
38
6 x PCI Adapters
10 x Slim-Line HDDs
16 x 512MB RDIMMs
4
Full Configuration with Redundancy
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. xSeries 250 uses an SVGA controller (S3 Trio 3D chipset) with 4MB of video memory.
6. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity
Rack Keyboard Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
8. The addition of a DLT tape drive may require a fourth power supply to preserve redundancy.
Part Number
Description
Conversion Kits
37L6860
8Ux24D Rack-to-Tower Kit1
37L6859
8Ux24D Tower-to-Rack Kit
Rack and NetBAY2
930842P
Netfinity Enterprise Rack
930842X
Netfinity Enterprise Expansion Cabinet
9306900
Netfinity Rack
9306910
Netfinity Rack (includes perforated front door)
9306200
Netfinity NetBAY22
10L6912
Netfinity NetBAY33
Keyboard and Mouse4
28L3644
Space Saver II Keyboard5, 7
01K1260
TrackPoint IV 104-Key Black Keyboard6,7
28L3621
Preferred Keyboard (stealth black)6
28L3673
Sleek 2-Button Stealth Black Mouse
1. Includes one Netfinity NetBAY3 with casters.
2. xSeries 250 rack models are housed in a 19in rack mountable drawer. See Rack Cabinet and Options section for
IBM rack supported devices.
3. xSeries 250 rack models require 8Ux24D Rack-to-Tower Kit (P/N 37L6860) for use with a NetBAY3. A maximum
of three NetBAY3 enclosures, including the one which ships with the conversion kit, may be stacked beneath a
supported Netfinity tower server. Optional NetBAY3s must be shipped separately and not while attached to the
base configuration. See IBM Netfinity NetBAY3 Stackable Enclosure section for supported devices.
4. xSeries 250 rack models ship without a keyboard or mouse.
5. Installation within a rack requires optional keyboard tray (P/N 28L4707) (stows in ready-to-use position).
6. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard
tray with a flat panel display.
7. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
52
xSeries 250 Tape Options
Part
Number
Tape Drives
Bays
Supported
SCSI
Interface
(bit)
00N7991
20/40GB DDS/4 4mm Internal Tape Drive
1, 2
16 Ultra2 LVD
00N7990
40/80GB DLT Internal SCSI Tape Drive
1+2
16 Ultra2 LVD
00N8017
60/120GB 8mm M2 SCSI Tape Drive
1, 2
16 Ultra2 LVD
09N4040
20/40GB DLT Internal SCSI Tape Drive
1+2
8
00N8016
100/200GB LTO Tape Drive
1+2
16 Ultra2 LVD
24P2396
100/200GB LTO Half-High Tape Drive
1, 2
16 Ultra2 LVD
3502108
DLT Tape Autoloader
N/A
16
00N7992
120/240GB DOS/4 Tape Autoloader
1+2
16 Ultra2 LVD
Form
Factor
89mm
(3.5in) HH
or 133mm
(5.25in) HH
133mm
(5.25in) FH
133mm
(5.25in) HH
133mm
(5.25in) FH
133mm
(5.25in) FH
133mm
(5.25in) HH
Termination
Included
68/50-pin
Converter
Incl
Ext Tape
Enclosures
N
N/A
N
N/A
N
N/A
N
Y
N
N/A
35510011
N
N/A
35510011
Y
N/A
-
N
N/A
35510011
35100202,
35510011
3503B0X2,
35510011
35100202,
35510011
3503B0X2
3551001
Desktop
133mm
(5.25in) FH
IBM XSERIES 250
Tape Autoloaders
External Tape Libraries3
Y
-
-
Diff
Desktop or
Rack
6U Rack
Y
N/A
-
-
8, 16
16
16
16 LVD
Desktop
Desktop
Rack
-
N
N
Y
N
N
N
N
N
3551001
-
16 LVD/SE
Ext
Y
N
-
16 LVD
Int
Y
N
3502x14
DLT Tape Library
-
16
3570C2X
Magstar MP 3570 Tape Subsystem
-
3510020
3503B0X
3551001
10L7113
External Half High SCSI Storage Enclosure4
DLT External SCSI Enclosure5
NetMEDIA Storage Expansion Unit EL6
NetMEDIA Systems Management Adapter7
-
External Tape Enclosures
Associated Options
00N7956
10K2340
68-pin External Multimode LVD/SE SCSI
Terminator
Media BayTray and LVD Cable Kit1
3510020,
3503B0X
3551001
Note: xSeries 250 includes a two-drop multimode terminated LVD SCSI cable, an available internal Ultra2 SCSI port and an external Ultra2 0.8mm VHDCI connector.
1. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) requires replacement of the standard single-ended internal cables with one or more
(depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop mult-mode terminated cable. If the standard cables are used for
attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
2. Requires 68-pin External Multimode LVD/SE SCSI terminator (P/N 00N7956).
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. Provides a black desktop 133mm (5.25in) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self-termination
or 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
5. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI
terminator (P/N 00N7956).
6. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, 19in rack or NetBAY3/3E mountable tape enclosure which includes two full-high (FH) or four half-high (HH) extended
length 133mm (5.25in) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies
and two power cords are also included. Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a 930842x rack.
7. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a 3551001 to provide repeater function, LVDS interface, aggregate cable lengths up to 12m when attached to an
LVD SCSI controller, and auto-termination when the 3551001 is powered off. External connector is 0.8mm VHDCI.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
53
xSeries 250 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or
IBM Marketing Representative for assistance with your specific configuration requirements.
High Availability Application Server
Part Number
Description
Quantity
Usage
1
4
4
4
3
1
2
61
1
1
1
1
1
4GB Total System Memory
Total of 4 SMP processors
Optional RAID adapter
9.1GB mirrored for NOS
72GB RAID 5 with Hot-Spare
Full Power Redundancy
EXP300 Storage Expansion Unit
1
37L7206
36.4GB 10K-4 Wide Ultra160 SCSI Hot-Swap SL HDD
14
Includes 2M Ultra2 cable
RAID 5 Data Storage with HotSpare
9306200
09N4290
94G6667
94G7447
94G6670
Netfinity NetBAY22
NetBAY 1x4 Console Switch
Power Cable - Type A14
NetBAY Console Cable Set-12ft
Blank Filler Panel Kit
8665-7RY
33L3113
33L3115
33L3117
10K2332
37L6080
37L7201
37L7202
00N7990
33L3760
66274AN
28L3644
94G6674
xSeries 250 Pentium III Xeon 700/2MB, 512MB(R) ECC, OPEN, 40X, PCI (Rack 8U)
Netfinity 128MB, 100MHz ECC SDRAM RDIMM
Netfinity 256MB, 100MHz ECC SDRAM RDIMM
Netfinity 512MB, 100MHz ECC SDRAM RDIMM
Netfinity 700MHz/2MB Upgrade II with Pentium III Xeon Processor
ServeRAID-4M Ultra160 SCSI Controller
9.1GB Ultra160 SCSI Hot-Swap SL HDD
18.2GB Ultra160 SCSI Hot-Swap SL HDD
40/80GB DLT Internal SCSI Tape Drive
250W Hot-Swap Redundant Power Supply
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black
Space Saver II Keyboard
APC Smart-UPS 1400RMB
35311RU
-
External Storage
Rack
1
1
1
1
1
1. Six HDDs are used for RAID 5 protection. One HDD is identified as a hot-spare. Effective capacity is four HDDs or 72.8GB
This rack server is configured to act as the foundation for business critical applications, applications your business cannot afford to be without. Configured with
enough HDDs to mirror the operating system and provide a standard RAID 5 environment for data, optional hot-swap redundant power and UPS for power even
during a blackout, this server represents the leading edge in high availability. An internal tape drive is included to back up that all important asset--data. A modem
could be included to allow out-of-band (non-LAN) system management utilizing the integrated Netfinity Advanced System Management Processor.
Server Consolidation
Part Number
Description
Quantity
Usage
8665-6RY
33L3113
10K2331
37L6080
37L7204
37L7205
06P3601
00N7990
66274AN
28L3644
94G6674
xSeries 250 Pentium III Xeon 700/1MB, 512MB(R) ECC, OPEN, 40X, PCI (Rack 8U)
Netfinity 128MB, 100MHz ECC SDRAM RDIMM
Netfinity 700MHz/1MB Upgrade II with Pentium III Xeon Processor
ServeRAID-4M Ultra160 SCSI Controller
9.1GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
10/100 Ethernet Server Adapter
40/80GB DLT Internal SCSI Tape Drive
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black
Space Saver II Keyboard
APC Smart-UPS 1400RMB
Rack
Netfinity NetBAY22
NetBAY 1x4 Console Switch
Power Cable - Type A14
NetBAYConsole Cable Set 12ft
Blank Filler Panel Kit
1
4
1
1
2
81
3
1
1
1
1
1GB Total System Memory
Total of 2 SMP processors
Optional RAID adapter
9.1GB mirrored for NOS
109GB RAID 5 with Hot-Spare
Total of 4 Ethernet connections
-
1
1
1
1
2
Attaches to monitor
-
9306200
09N4290
94G6667
94G7447
94G6670
-
1. Eight HDDs are used for RAID 5 protection. One HDD is identified as a hot-spare. Effective capacity is six HDDs or 109.2GB
This rack server is configured to meet the need of server consolidation. Many businesses are trying to achieve better control of the dispersed departmental servers
that have grown up around the enterprise. By moving multiple servers on to one platform, there is only one system to manage both hardware and software. There is
potentially less expense for service, software licenses, etc., and there is less concern about single points of failure because the xSeries 250 is designed for high
availability. This configuration includes 109GB of internal HDD storage, features three power supplies which provide fully redundant power, a UPS to help protect the
system against a momentary electricity loss, and an internal tape drive that backs up as much as 80GB per tape--in addition to all the standard features of the
Netfinity 7600.
54
High Availability File and Print Server
Part Number
Quantity
Usage
8665-61Y
33L3113
10K2331
37L6080
xSeries 250 Pentium III Xeon 700/1MB, 512MB(R) ECC, OPEN, 40X, PCI (Tower)
Netfinity 128MB, 100MHz ECC SDRAM RDIMM
Netfinity 700MHz/1MB Upgrade II with Pentium III Xeon Processor
ServeRAID-4M Ultra160 SCSI Controller
Description
1
4
1
1
37L7086
xSeries Ultra160 SCSI Repeater Card
1
37L7204
37L7205
06P3601
00N7990
66274AN
94G3136
9.1GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
10/100 Ethernet Server Adapter
40/80GB DLT Internal SCSI Tape Drive
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black
APC Smart-UPS 1400
2
81
3
1
1
1
1GB Total System Memory
Total of 2 SMP processors
Optional RAID adapter
Create single SCSI bus from split
backplane
9.1GB mirrored for NOS
109GB RAID 5 with Hot-Spare
Total of 4 Ethernet connections
-
1. Eight HDDs are used for RAID 5 protection. One HDD is identified as a hot-spare. Effective capacity is six HDDs or 109.2GB
IBM XSERIES 250
This file and print server is designed to handle a high workload with significant storage and availability requirements. With this in mind, the IBM xSeries 250 was
selected to provide an affordable price point for a high end file and print server with optional four-way Pentium III Xeon processing, 1GB of system memory
(expandable to 16GB), and availability such as battery-backed cache RAID-protected internal hot-swap storage and power protection with an APC Smart-UPS.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
55
IBM xSeries 330
)
) ax
or
)
s)
ail d/M
ss
ID
d)
an
v
x)
r
e
A
F
t
a
A
R
,
l/ S
da
oc
/M
ta e (
a,
DD
Pr
an
td
ltr
2
(ToDriv
St
(S
RD
,H
nt ps)
(
U
,
s
e
s
)
y
l
=
,
s
t
z
y k
r
a
it
m
al
R
lo
Mb
nt
Ba is
MH esso B)
)(
ion age et (
,S
Du
)
il)
ua
ia r d D
pt
n
ax
er
d(
r(
n
c e (K
d
Q
3
a
r
e
O
va vail
e
w
o
M
e
a
(
l
/
e
e
y
r
A
M
l
o
)
r
l
/
h
H
d
M
h
p
y
r
l
P
o
e
P
t
p
E
/A
t
c
l
r
(
c
l
o
a
S
m
f
e
b
p
S
t
a
D
E
t
t
a
l
n
a
(
I
e
o
p
u
n
c
(
t
m
a
d
or
r CC
y
To Tot
ab rn
Fa
ys
Co
rS
wa
ar
nd
ss
(
Nu
or
be
s(
ov te
OM
m
SI
m 2 EC
t-S
du dv S nbo
ce
rt
we
m In
rm
-R
ay lots
e
u
o
e
C
o
a
o
e
o
B
D
r
R
P
N
S
L
F
M
O
P
H
A
R
S
P
C
)
ax
/M
d
St
M)
IM
xSeries 330 At-A-Glance
8654-11Y1
800
1/2
256
256MB(R)/4GB
Rack (1U)
1/1
H
-
Y
2 x 10/
100
U160
-
0/72.8GB
24X-10X
4/2
2/2
8654-31Y1
866
1/2
256
256MB(R)/4GB
Rack (1U)
1/1
H
-
Y
2 x 10/
100
U160
-
0/72.8GB
24X-10X
4/2
2/2
8654-41Y1
933
1/2
256
256MB(R)/4GB
Rack (1U)
1/1
H
-
Y
2 x 10/
100
U160
-
0/72.8GB
24X-10X
4/2
2/2
8654-51Y1
1GHz
1/2
256
256MB(R)/4GB
Rack (1U)
1/1
H
-
Y
2 x 10/
100
U160
-
0/72.8GB
24X-10X
4/2
2/2
1. Housed in a 19in rack mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “xSeries 330 Power, Monitor & Accessories” for supported
IBM racks.
2. Intel Pentium III processor with advanced transfer (full speed) L2 cache and 133MHz Front-Side Bus (FSB).
3. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
xSeries 330 Processors
Part
Number
Processor Upgrades with 256KB Cache
(Full Speed)
SMP
Support1
Processor Speed
Upgrade2
10K3810
800MHz Upgrade with 133MHz FSB and 256KB Advanced Transfer Cache Pentium III Processor
11Y
-
10K3806
866MHz Upgrade with 133MHz FSB and 256KB Advanced Transfer Cache Pentium III Processor
31Y
1xY
10K0052
933MHz Upgrade with 133MHz FSB and 256KB Advanced Transfer Cache Pentium III Processor
41Y
1 ... 3xY
10K0053
1GHz Upgrade with 133MHz FSB and 256KB Advanced Transfer Cache Pentium III Processor
51Y
1 ... 4xY
1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of two processors may be installed. All processors must be identical in type, speed and cache size. Upgrades may require a
BIOS update. To obtain the latest Flash BIOS, access www.pc.ibm.com/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” then “BIOS.”
56
xSeries 330 Memory
Total
Memory1
RDIMM 1
RDIMM 2
RDIMM 4
Part
Number
RDIMM 3
256MB
(1 x 256)
Models
Memory
Description1
Quantity of RDIMMs Added
128MB
(33L3142)
256MB
(33L3144)
512MB
(33L3146)
1GB
(33L3152)
384MB
1
-
-
-
512MB
2 or
1
-
-
640MB
3
-
-
-
768MB
-
2 or
1
-
33L3142
128MB, 133MHz SDRAM ECC RDIMM II
1024MB
-
3
-
-
33L3144
256MB, 133MHz SDRAM ECC RDIMM II
1280MB
-
-
2 or
1
-
33L3146
512MB, 133MHz SDRAM ECC RDIMM II
1792MB
-
-
3
33L3152
1GB, 133MHz SDRAM ECC RDIMM II
2048MB
-
-
42
-
2304MB
-
-
-
2
3328MB
-
-
-
3
4096MB (max)
-
-
-
42
1. Memory RDIMMs must be installed in sequence from RDIMM connector 1
through connector 4. RDIMM size is not relevant.
This table does not represent all possible memory configurations. Memory modules may vary in price
per MB. Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger
RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating
system specifications for further information.
2. Requires removal of standard memory.
Total Int
Storage1
7200RPM HDDs
10,000RPM HDDs
9.1GB
18.2GB
36.4GB
(37L7201)
(37L7202)
(37L7203)
0GB
15,000RPM HDDs
9.1GB
18.2GB
36.4GB
9.1GB
18.2GB
(37L7204)
(37L7205)
(37L7206)
(19K0655)
(19K0656)
Standard on base models
9.1GB
1
-
-
1
-
-
1
-
18.2GB
2 or
1
-
2 or
1
-
2 or
1
36.4GB
-
2 or
1
-
2 or
1
-
2
72.8GB
-
-
2
-
-
2
-
-
This table does not represent all possible HDD configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal Storage listed is
within +/- 0.2GB unless otherwise noted.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
57
IBM XSERIES 330
xSeries 330 Hard Disk Drive (HDD) and External Storage
Floppy / CD-ROM
Bay 1
Bay 2
Bay
Form
Factor
Height
Front
Access
Usage
11
HS
SL
Yes
Open
2
HS
SL
Yes
Open
1. Boot drive should be located in bay 1.
Part
Number
Description
RPM
Height
Bays
Supported
Max
Qty
Ultra160 Hard Disk
Drives (HDD)
37L7201
9.1GB Ultra160 SCSI Hot-Swap SL
HDD
7200
SL
1 ... 2
2
37L7202
18.2GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
1 ... 2
2
37L7203
36.4GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
1 ... 2
2
37L7204
9.1GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
1 ... 2
2
37L7205
18.2GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
1 ... 2
2
37L7206
36.4GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
1 ... 2
2
19K0655
9.1GB 15K-rpm Ultra160 SCSI HotSwap HDD
15,000
SL
1 ... 2
2
19K0656
18.2GB 15K-rpm Ultra160 SCSI
Hot-Swap HDD
15,000
SL
1 ... 2
2
External Storage
Expansion Units1
Form Factor
35311RU
Netfinity EXP300 Storage
Expansion Unit2
Rack (3U)
35601RU
Netfinity FAStT EXP500 Storage
Expansion Unit3
Rack (3U)
Server4, 5
35421RU
FAStT200 Storage
35422RU
FAStT200 HA Storage Server4
19K1121
FAStT200 Redundant RAID
Controller
Rack (3U)
Rack (3U)
-
1. xSeries 330 does not include an external SCSI connector. To configure a SCSI storage device, select an
optional SCSI controller then refer to Appendix D: Cables - Storage Units - Controllers to confirm the controller
supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other
expansion unit options, see the specific expansion unit section. For Fibre Channel storage devices, refer to the
Fibre Array Solutions section.
2. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each
with its own power cord.
3. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each
with its own power cord.
4. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power
cord.
5. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID
Controller (P/N 19K1121).
xSeries 330 Internal SCSI Cabling
xSeries 330 contains a DASD backplane supporting two hot-swap, SCA-2 compliant drive bays. The backplane is connected to one of the internal connectors of the
integrated Ultra160 SCSI controller through a 16-bit LVD SCSI cable. If internal RAID is required, the cable can be attached to the internal connector of the optional
RAID adapter. The cable is of sufficient length to attach to adapters in slot one but not slot two.
In configurations where external SCSI device attachment is required, a supported SCSI adapter or ServeRAID controller must be installed.
58
xSeries 330 I/O Options
Part
Number
Description
Adapter
Length
PCI
Support
Slots
Supported
Storage Controllers1
37L6091
ServeRAID-4L Ultra160 SCSI Controller2
Full
32/64-bit
1
37L6080
ServeRAID-4M Ultra160 SCSI Controller3
Full
32/64-bit
1
37L6889
ServeRAID-4H Ultra160 SCSI Controller4
Full
32/64-bit
1
19K4646
PCI Wide Ultra160 SCSI Adapter5
Half
32/64-bit
1, 2
02K3454
PCI Fast/Wide Ultra SCSI Adapter6
Half
32-bit
1, 2
Netfinity FAStT Host Adapter
Half
32/64-bit
1, 2
FAStT500 Storage Server
-
-
-
35421RU
FAStT200 Storage Server
-
-
-
35422RU
FAStT200 HA Storage Server
-
-
-
35341RU
SAN Fibre Channel Managed Hub
-
-
-
2109S08
SAN Fibre Channel Switch, 8-Port
-
-
-
2109S16
SAN Fibre Channel Switch, 16-Port
-
-
-
2108R3L
SAN Data Gateway Router Ultra SCSI LVD Port8
-
-
-
Networking9
Ethernet
19K4401
Netfinity Gigabit Ethernet Adapter (copper)
Half
32/64-bit
1, 2
09N9901
10/100 EtherLink Server Adapter by 3Com
Half
32-bit
1, 2
34L4601
Netfinity 10/100 Ethernet Security Adapter
Half
32/64-bit
1, 2
06P3601
10/100 Ethernet Server Adapter
Half
32-bit
1, 2
06P3701
Gigabit Ethernet SX Server Adapter (fiber)
Half
32/64-bit
1, 2
Token Ring
34L0701
Token-Ring 16/4 PCI Adapter2 with Wake on LAN10
Half
32-bit
1, 2
34L5001
16/4 Token-Ring PCI Management Adapter10
Half
32-bit
1, 2
34L5201
High-Speed 100/16/4 Token-Ring PCI Management
Adapter10
Half
32-bit
1, 2
Slot 2- 33 MHz, 64-bit, 5 V or Universal, Half Length
00N6881
35521RU
Slot 1- 33 MHz, 64-bit, 5 V or Universal, Full Length
Fibre Storage Controllers and Options7
Exterior
Connector
Access
11
PCI V.90 56 Data/Fax Modem
Half
32-bit
1, 2
37L14xx
Serial I/O SST 8, 16 and 128 port adapters12
Half
32-bit
1, 2
IBM XSERIES 330
Communications
33L4618
Systems Management13
01K7209
Netfinity Advanced System Management PCI Adapter
Full
32-bit
1
03K9309
Netfinity Advanced System Management Interconnect
Cable Kit
-
-
-
36L9654
Netfinity Advanced System Management Token-Ring
Connection
-
-
-
1. xSeries 330 has an integrated single channel Ultra160 SCSI Controller.
2. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides a single channel, 16MB of ECC cache and either one internal or one external
Ultra160 connection. External connector is 0.8mm VHDCI.
3. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides two channels, 64MB of battery-backed ECC cache and two external 0.8mm
VHDCI Ultra160 connectors.
4. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266MHz Power PC 750 processor and provides 128MB of battery-backed ECC cache. The internal connectors are not
accessible due to a cabling interference. Four external Ultra160 0.8mm VHDCI connectors are available.
5. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and one external 0.8mm VHDCI Ultra160 connector. Support for external
SCSI devices only. A five-drop terminated LVD SCSI cable is included but not supported for use in this server.
6. For use in supporting external SCSI devices such as tape drives.
7. See the Fibre Array Solutions section for additional configuration information.
8. The 2108R3L SAN Data Gateway Router Ultra SCSI LVD port replaces both the Single-ended and Differential SAN Data Gateway Routers (P/N 2108R3D and 2108R3S).
9. xSeries 330 includes dual full-duplex, 10/100Mbps Ethernet controllers.
10. The Wake on LAN function of this option is not supported by this server.
11. xSeries 330 includes two USB ports and a high speed serial/asynchronous port (NS16550A compatible).
12. See Appendix E for details on Serial I/O Options and configuration limitations.
13. xSeries 330 has a single integrated system management port and a single RS485 port.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
59
xSeries 330 Power, Monitor & Accessories
Part Number
Description
Power1
Uninterruptible Power Supply (UPS)2
94G6674
APC Smart-UPS 1400RMB3
94G6676
APC Smart-UPS 3000RMB3
37L6861
APC Smart-UPS 5000RMB4
06P4792
Cable Chain Technology Cable Kit6
633347N
E51 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black7
6331N2N
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black7
6332J1N
E74 Color Monitor 17in (403mm, 15.9in Viewable Image Size), stealth black7
Monitors5
66274AN
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black7
9511AG1
T54A TFT LCD Color Monitor (306mm x 230mm, 15in Viewable Image Size), stealth black8
37L6888
Netfinity Flat Panel Monitor Rack Mount Kit II
1. The xSeries 330 includes a worldwide, voltage sensing 200W power supply and two 9ft line cords. One line cord contains a 110V
NEMA 5-15P connector while the other contains an IEC 320 C14 for attachment to a high voltage PDU or UPS.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. xSeries 330 uses an SVGA controller (S-3 Savage4 chipset) with 8MB of video memory.
6. A Cable Chain Technology Cable Kit (P/N 06P4792) is required for the attachment of console devices to one or multiple chained
xSeries 330s. The kit contains a 2M (6.5 ft) breakout cable for attachment to a keyboard. mouse and monitor, as well as a 2M (6.5ft)
chaining cable for connecting two xSeries 330s together when the standard 245mm (9.6in) chaining cable is not long enough, A
maximum of 42 xSeries 330s are supported in a single chain. No more than one C2T Cable kit may be used. If the last server in the
chain is connected to a console switch rather than directly to a monitor, a console cable is required (P/N 09N4293 or 94G7447).
7. Installation within a rack requires optional Monitor Compartment (P/N94G7444).
8. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity Rack Keyboard
Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
Part Number
Description
Rack and NetBAY1, 2
930842P
Netfinity Enterprise Rack3
930842X
Netfinity Enterprise Expansion Cabinet3
930842S
NetBAY 42 Enterprise Rack Cabinet (ER)
930842E
NetBAY 42 Enterprise Expansion Rack Cabinet (EX)
06P6048
NetBAY Enterprise Rack Perforated Door Kit
9306900
Netfinity Rack4
06P6010
Netfinity Rack Front Door Kit5
9306910
Netfinity Rack (includes perforated front door)
36L9703
Netfinity Rack Extension Kit6
9306200
Netfinity NetBAY227
36L9702
NetBAY22 Rack Extension Kit6
36L9701
Netfinity NetBAY3E8
06P4792
Cable Chain Technology Cable Kit
Keyboard and Mouse9
60
28L4707
Netfinity Rack Keyboard Tray
28L3644
Space Saver II Keyboard10
28L3621
Preferred Keyboard (stealth black)11
28L3673
Sleek 2-button Stealth Black Mouse
1. xSeries 330 is housed in a 19in rack mountable drawer and requires one of the racks listed here. See Rack Cabinet and Options
section for IBM rack supported devices.
2. To provide adequate cooling, Blank Filler Panel Kit (P/N 94G6670) should be placed on the front of any unused rack space. If
non-IBM racks are to be used, assure that both the front and rear doors offer a minimum of 48% open area uniformly distributed and in
line with installed servers. A clearance of 51 to 64mm (2 to 2.5in) must be maintained between the front door and the system unit’s front
bezel. The rear door must maintain the same or greater clearance. Clearance between the EIA mounting rails and rack side covers must
be less than 13mm (0.5in) to prevent air re-circulation from back to front. Nonrack installations are not supported.
3. To enable proper cooling, the front door must be removed, or a NetBAY42 Enterprise Rack Perforated Door Kit (P/N 06P6048) can
replace the standard glass door of either the Enterprise Rack or Enterprise Expansion Cabinet.
4. To enable proper cooling, optional Netfinity Rack Front Door Kit (P/N 06P6010) must be installed or the front door must be removed.
5. Provides a perforated front door replacement for the standard glass door of a Netfinity Rack (P/N 9306900).
6. Although not required, the use of an appropriate Extension Kit is recommended to improve cable management.
7. To enable proper cooling, the front door must be removed.
8. Up to three xSeries 330s are supported for installation in a NetBAY3E and up to three NetBAY3Es are supported while installed
beneath an xSeries 370 / Netfinity 8500R. An x370 / 8500R must be installed on top of the NetBAY3E. and the NetBAY3E bezel should
be removed.
9. A Cable Chain Technology Cable Kit (P/N 06P4792) is required for the attachment of console devices to one or multiple chained
xSeries 330s. The kit contains a 2M (6.5ft) breakout cable for attachment to a keyboard, mouse and monitor, as well as a
2M (6.5ft) chaining cable for connecting two xSeries 330s together when the standard 245mm (9.6in) chaining cable is not long
enough. A maximum of 42 xSeries 330s are supported in a single chain. No more than one kit may be used. If the last server in the
chain is connected to a console switch rather than directly to a monitor, a console cable is required (P/N 09N4293 or 94G7447).
10. Installation within a rack requires optional keyboard tray (P/N 28L4707) which stows in ready-to-use position.
11. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat panel
display.
xSeries 330 Tape Options
Tape Drives
Bays
Supported
SCSI
Interface
(bit)
09N4041
12/24GB DDS/4 4mm Internal SCSI Tape
Drive
N/A1
8
09N4042
10/20GB NS Internal SCSI Tape Drive
N/A1
8
00N7991
20/40GB DDS/4 4mm Internal Tape Drive
N/A1
16 Ultra2 LVD
09N4040
20/40GB DLT Internal SCSI Tape Drive
N/A1
8
00N7990
40/80GB DLT Internal SCSI Tape Drive
N/A
1
16 Ultra2 LVD
00N8017
60/120GB 8mm M2 SCSI Tape Drive
N/A1
16 Ultra2 LVD
00N8016
100/200GB LTO Tape Drive
N/A
16 Ultra2 LVD
00N7992
120/240GB DDS/4 Tape Autoloader
N/A1
16 Ultra2 LVD
-
Form
Factor
89mm (3.5in)
HH or
133mm
(5.25in) HH
89mm (3.5in)
SL or
133mm
(5.25in) HH
89mm (3.5in)
HH or
133mm
(5.25in) HH
133mm
(5.25in) FH
133mm
(5.25in) FH
133mm
(5.25in) FH
133mm
(5.25in) FH
Termination 68/50-pin
Ext Tape
Included
Converter Enclosures
Incl
Y
Y
3551001
Y
Y
3551001
N
N/A
35510012
N
Y
3551001
N
N/A
35510012
N
N/A
35510012
N
N/A
35510012
133mm
(5.25in) FH
N
N/A
35510012
16
Diff
Rack
6U Rack
Y
Y
N/A
N/A
-
-
16
16 LVD
Rack
-
Y
N
N
N
3551001
-
16 LVD
Int
Y
N
3551001
IBM XSERIES 330
Part
Number
Tape Autoloaders
External Tape
Libraries3
3502R14
3570C2X
DLT Tape Library
Magstar MP 3570 Tape Subsystem
3551001
10L7113
NetMEDIA Storage Expansion Unit EL4
NetMEDIA Systems Management Adapter5
10K2340
Media Bay Tray and LVD Cable Kit2
External Tape Enclosures
Associated Options
1. xSeries 330 does not support internal tape drives and does not include an external SCSI connector. An external tape or internal tape with a tape enclosure, supported SCSI adapter and
appropriate cable must be selected. All tape drives and enclosures are supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which has an external 0.8mm VHDCI connector.
Select tape drive, enclosure and supported adapter then use Appendix D: Cables - Storage Units - Controllers to select an appropriate external cable.
2. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) requires replacement of the standard single-ended internal cables with one or more
(depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop mult-mode terminated cable. If the standard cables are used
for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, 19in rack mountable tape enclosure which includes two full-high (FH) or four half-high (HH) extended length 133mm
(5.25in) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two
power cords are also included. Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a 930842x rack.
5. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a 3551001 to provide repeater function, LVDS interface, aggregate cable lengths up to 12m when attached
to an LVD SCSI controller, and auto-termination when the 3551001 is powered off. External connector is 0.8mm VHDCI.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
61
xSeries 330 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or
IBM Marketing Representative for assistance with your specific configuration requirements.
Internet Server1
Part Number
8654-41Y
37L7205
06P4792
6331N2N
28L3644
94G6674
Description
xSeries 330 (Pentium III 933/256MB/0GB)
18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
Cable Chain Technology Cable Kit
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
Space Saver II Keyboard
APC Smart-UPS 1400RMB
Quantity
1
22
13
1
1
1
1. This example shows a 19in rackable configuration. The rack components are not included.
2. For a total of 36.4GB of internal storage.
3. A single Cable Chain Technology Cable Kit (P/N 06P4792) is required for attachment of one or multiple (up to 42) chained xSeries 330s to a single
monitor, mouse and keyboard.
An Internet server handles all requests from the Internet (Intranet or Extranet). Usually, this type of server has the same characteristics as a normal file server. The
main difference is that an Internet server talks a different language (TCP/IP vs. NETBEUI or IPX/SPX) and often needs to do an extra security check (firewall). In the
case of an Internet server, the server itself talks mostly to just one client, the Internet Service Provider (ISP), instead of many clients as a file server does.
With this is mind, the xSeries 330 was selected to provide an affordable price point for the growing Internet server market with two-way Pentium III processing, 256MB
of system memory (expandable to 4GB), and power protection with an APC Smart-UPS.
The network configuration depends on the method that will be used to connect the server to the Internet. Usually fast Ethernet routers are used, but if other methods
are used you can add the appropriate adapter.
File and Print Server1
Part Number
8654-11Y
33L3142
37L7206
06P4792
6331N2N
28L3644
94G6674
Description
xSeries 330 800MHz/256KB, 256MB ECC, OPEN, 24X, PCI
xSeries 128MB 133MHz ECC SDRAM RDIMM
36.4GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
Cable Chain Technology Cable Kit
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
Space Saver II Keyboard
APC Smart-UPS 1400RMB
Quantity
1
12
23
14
1
1
1
1. This example shows a 19in rackable configuration. The rack components are not included.
2. For a total of 384MB of system memory.
3. For a total of 72.8GB of internal storage.
4. A single Cable Chain Technology Cable Kit (P/N 06P4792) is required for attachment of one or multiple (up to 42) chained xSeries 330s to a single
monitor, mouse and keyboard.
A small business or departmental server is usually required to perform all typical server functions while servicing up to 100 users in a normal workgroup computing
environment, but doesn’t require the high-end performance and fault-tolerance properties of larger servers.
The sample configuration above consists of an xSeries 330 with 384MB of memory and 72.8GB of HDD space. It has enough processor power and memory to run
most current network operating systems comfortably and enough HDD space to store a significant amount of data with additional external storage expansion still
available. Demanding network traffic is effectively handled by the standard 100Mbps Ethernet connection.
This configuration also includes a UPS to keep the system protected during power surges and outages.
Application Server1
Part Number
8654-51Y
10K0053
33L3144
37L7205
06P4792
6331N2N
28L3644
94G6674
Description
xSeries 330 1GHz/256KB, 256MB ECC, OPEN, 24X, PCI
1GHz Upgrade with 133MHz FSB and 256KB Advanced Transfer Cache Pentium III Processor
xSeries 256MB 133MHz ECC SDRAM RDIMM
18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
Cable Chain Technology Cable Kit
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
Space Saver II Keyboard
APC Smart-UPS 1400RMB
Quantity
1
1
12
23
14
1
1
1
1. This example shows a 19in rackable configuration. The rack components are not included.
2. For a total of 512MB of system memory.
3. For a total of 36.4GB of internal storage.
4. A single Cable Chain Technology Cable Kit (P/N 06P4792) is required for attachment of one or multiple (up to 42) chained xSeries 330s to a single monitor, mouse and
keyboard.
An application server differs from a file and print server in that it has a higher workload in providing application serving requirements for users. With this in mind, the
xSeries 330 was selected to provide an affordable price point for an application server with two-way Pentium III processing, 512MB of system memory (expandable to
4GB), and availability features such as RAID-protected internal storage and power protection with an APC Smart-UPS.
62
IBM XSERIES 330
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
63
IBM xSeries 340 and Netfinity 4500R
)
)
) ax
or
)
ns
)
ail d/M
)
ss
ID
d)
a
v
x
x
r
e
)
A
F
t
a
A
a
R
,
M
l/ S
da
oc
/M
/M
ta e (
a,
IM
DD
Pr
an
td
td
ltr
2
(ToDriv
St
(S
RD
,H
nt ps)
(S
U
,
s
e
s
)
y
l
=
,
s
t
b
z
y k
r
a
it
m
al
R
lo
nt
Ba is
g e t (M (D u
MH sso B)
)(
ion
8
,S
)
il)
ua
ia r d D
pt
n a r ne
ax
er
d ( oce (K
r
e
d
Q
6
a
e
O
t
va vail
e
w
M
e
a
(
e
l
/
e
y
e
r
a
A
M
l
o
r
)
l
/
h
H
d
M
h
p
y
r
l
P
D
o
P
e
t
p
E
/A
t
c
l
r
(
c
l
o
a
S
m
l
f
e
b
p
S
t
a
D
t
E
t
a
l
n
a
(
I
a
e
o
p
u
n
c
(
t
m
a
d
or er C C
y
w
To Tot
ab r n
Fa r S
ys
Co
wa
ar
nd
ss
(
Nu
ra
or
b
s(
ov te
OM
SI
t-S
du
ce um 2 EC em
rt
v S nb o
hd
m In
rm owe
-R
ay lots
t
o
e
C
o
a
d
e
o
i
B
D
r
R
P
P
N
S
H
F
M
L
O
A
R
S
P
W
C
xSeries 340 / Netfinity 4500R At-A-Glance
8656-1RY1
27-Mar
733
1/2
256
128MB(R)/4GB
Rack
(3U)
1/2
P, H, F
O - Power3
S - Fans
Y 10/100
D,U160
4/24
0/
218.4GB5
24X10X
8/65
5/5
8656-3RY1
27-Mar
800
1/2
256
128MB(R)/4GB
Rack
(3U)
1/2
P, H, F
O - Power3
S - Fans
Y 10/100
D,U160
4/24
0/
218.4GB5
24X10X
8/65
5/5
8656-4RY1
-
866
1/2
256
128MB(R)/4GB
Rack
(3U)
1/2
P, H, F
O - Power3
S - Fans
Y 10/100
D,U160
4/24
0/
218.4GB5
24X10X
8/65
5/5
8656-5RY1
-
933
1/2
256
128B(R)/4GB
Rack
(3U)
1/2
P, H, F
O - Power3
S - Fans
Y 10/100
D,U160
4/24
0/
218.4GB5
24X10X
8/65
5/5
8656-6RY1, 7
-
1GHz 1/2
256
128MB(R)/4GB
Rack
(3U)
1/2
P, H, F
O - Power3
S - Fans
Y 10/100
D,U160
4/24
0/
218.4GB5
24X10X
8/65
5/5
1. Housed in a 19in rack mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “Power, Monitor & Accessories” for supported IBM racks.
2. Intel Pentium III processor with 133MHz front-side bus.
3. Power supply redundancy requires installation of optional 270W Hot-Swap Redundant Power Supply (P/N 37L6880).
4. xSeries 340 / Netfinity 4500R includes two available removable media bays that can be converted to three slim-line (SL) hot-swap bays with the addition of optional 3-Pack Hot-Swap DASD
Upgrade (P/N 33L5050), doubling internal hard disk drive storage capacity.
5. Assumes installation of optional Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050) which converts the two available removable media bays into three slim-line (SL) hot-swap
bays.
6. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
7. This model is an IBM xSeries 340.
8. Not available from IBM after this date. Business Partner inventory may be available.
xSeries 340 / Netfinity 4500R Processors
Part
Number
Processor Upgrades with 256 KB Cache
(Full Speed)
SMP
Support1
Processor Speed Upgrade2
19K4630
Netfinity 866MHz 133 FSB/256KB Upgrade with Pentium III Processor
4RY
1 ... 3RY
19K4631
Netfinity 933MHz 133 FSB/256KB Upgrade with Pentium III Processor
5RY
1 ... 4RY
19K4640
1GHz Upgrade with 133MHz FSB and 256KB Advanced Transfer Cache
Pentium III Processor
6RY
l ... 5RY
1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of two processors may be installed. All processors must be identical in type, speed and cache size. Upgrades may require a
BIOS update. To obtain the latest Flash BIOS, access www.pc.ibm.com/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” then “BIOS.”
64
xSeries 340 / Netfinity 4500R Memory
Total
Memory1
RDIMM Socket 4
128MB
(1 x 128)
Models
RDIMM Socket 3
RDIMM Socket 2
RDIMM Socket 1
Std (R)DIMM
Recommended order of installation:
Slot 1-2-3-4
Part
Number
Quantity of RDIMMs Added
Memory
Description1
128MB
(33L3123)
256MB
(33L3125)
512MB
(33L3127)
1GB
(33L3129)
256MB
1
-
-
-
384MB
2 or
1
-
-
512MB
3
-
-
-
640MB
-
2 or
1
-
33L3123
128MB, 133MHz SDRAM ECC RDIMM II
896MB
-
3
-
33L3125
256MB, 133MHz SDRAM ECC RDIMM II
1024MB
-
42
-
-
33L3127
512MB, 133MHz SDRAM ECC RDIMM II
1152MB
-
-
2 or
1
33L3129
1GB, 133MHz SDRAM ECC RDIMM II
1. The recommended order of installation is in sequence from Socket 1 to Socket 4.
Memory size is not a factor.
1664MB
-
-
3
-
2048MB
-
-
42
2
2176MB
-
-
-
3200MB
-
-
-
3
4096MB (max)
-
-
-
42
This table does not represent all possible memory configurations. Memory modules may vary in price
per MB. Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger
RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating
system specifications for further information.
2. Requires removal of standard memory.
xSeries 340 / Netfinity 4500R Hard Disk Drive (HDD) and External Storage
7200RPM HDDs
10,000RPM HDDs
9.1GB
18.2GB
36.4GB
9.1GB
(37L7201)
(37L7202)
(37L7203)
(37L7204)
0GB
18.2GB
15,000RPM HDDs
36.4GB
(37L7205) (37L7206)
9.1GB
18.2GB
(19K0655)
(19K0656)
Standard on base models
9.1GB
1
-
-
1
-
-
1
-
18.2GB
2
1
-
2
1
-
2
1
27.3GB
3
-
-
3
-
-
3
-
36.4GB
42
2
1
42
2
1
42
2
45.5GB
52
-
-
52
-
-
52
-
54.6GB
2
6
3
-
2
6
3
-
62
3
72.8GB
-
42
2
-
42
2
-
42
91GB
-
52
-
-
52
-
-
52
-
2
-
2
6
3
-
62
2
109.2GB
6
3
2
145.6GB
-
-
4
-
-
4
-
-
182GB
-
-
52
-
-
52
-
-
-
62
-
62
-
-
218.4GB
(max)
-
-
IBM XSERIES 340
NETFINITY 4500R
Total Int
Storage1
This table does not represent all possible HDD configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal Storage
listed is within +/- 0.2GB unless otherwise noted.
2. Requires Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050).
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
65
Bay
Form
Factor
Height
Front
Access
Usage
Part
Number
Description
RPM
Height
Bays
Max
Supported1 Qty
Ultra160 HDDs
-
89mm
(3.5in)
-
Yes
Diskette
-
133mm (5.25in)
-
Yes
IDE CDROM
37L7201
9.1GB Ultra160 SCSI Hot-Swap SL
HDD
7200
SL
1 ... 6
61
1 ... 3
HS
SL1
Yes
Open
37L7202
18.2GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
1 ... 6
61
A, B
133mm
(5.25in)
HH2
Yes
Open
37L7203
36.4GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
1 ... 6
61
4 ... 63
HS
SL1
Yes
Open
37L7204
9.1GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
1 ... 6
61
37L7205
18.2GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
1 ... 6
61
37L7206
36.4GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
1 ... 6
61
19K0655
9.1GB 15Krpm Ultra160 SCSI HotSwap HDD
15000
SL
1 ... 6
61
19K0656
18.2GB 15Krpm Ultra160 SCSI
Hot-Swap HDD
15000
SL
1 ... 6
61
33L5050
Netfinity 3-Pack Ultra160 HotSwap Expansion Kit2
-
3 x SL
4 ... 6
-
1. Half-High devices are NOT supported.
2 Two half-high (HH) bays can be combined to support a single full-high (FH)
device. By installing Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N
33L5050), bays A and B are transformed into three SL hot-swap
bays 4 ... 6.
3. To enable bays 4 ... 6, optional Netfinity 3-Pack Ultra160 Hot-Swap
Expansion Kit (P/N 33L5050) is required.
Associated Options
Diskette
CD-ROM
RM A
RM B
HS 4
HS 5
HS 6
Removable Media
(RM)
Hot-Swap
(HS)
External Storage
Expansion Units3
1
2
3
Form Factor
35311RU
EXP300 Storage Expansion Unit4
Rack (3U)
35601RU
FAStT EXP500 Storage Expansion
Unit5
Rack (3U)
Server6, 7
35421RU
FAStT200 Storage
35422RU
FAStT200 HA Storage Server6
19K1121
FAStT200 Redundant RAID
Controller
Rack (3U)
Rack (3U)
-
1. xSeries 340 / Netfinity 4500R ships with Bays 1 ... 3 enabled. To enable installation of greater than three HDDs
requires Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050).
2. Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050) includes a hot-swap backplane and
associated components for two cabling options. The backplane may be cabled directly to the second integrated
SCSI channel or be supported by the same SCSI channel as the standard backplane through the use of an
included repeater card.
3. To configure a SCSI storage device, select an optional SCSI controller then refer to Appendix D: Cables Storage Units - Controllers to confirm the controller supports the desired External Storage Expansion Unit and to
select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section. For
Fibre Channel storage devices, refer to the Fibre Array Solutions section.
4. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each
with its own power cord.
5. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each
with its own power cord.
6. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power
cord.
7. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID
Controller (P/N 19K1121).
xSeries 340 / Netfinity 4500R Internal SCSI Cabling
The xSeries 340 and Netfinity 4500R contain a DASD backplane supporting three hot-swap, SCA-2 compliant drive bays. The backplane is connected to one of the
internal connectors of the integrated Ultra160 SCSI controller through a 16-bit LVD SCSI cable. A single-drop 16-bit SCSI cable is included with the server for
attachment from the second internal Ultra160 connector to a removable media bay device. If an LVD attachment is required or more than one media bay device is
required, a terminated two-drop 16-bit LVD SCSI cable available in the Netfinity Media Bay Conversion Kit (P/N 10K2340) must be ordered. No external SCSI port is
included.
If optional Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050) is installed in the removable media bays, four cabling options are possible. Included with
this option is a 16-bit LVD SCSI cable, identical to the one used for attachment of the standard hot-swap backplane, which can be used to attach the optional 3-Pack
Ultra160 Hot-Swap backplane directly to the second onboard SCSI connector or that of an optional RAID adapter. Alternatively, a repeater card and cable are
included which may be used to link the standard hot-swap backplane and optional hot-swap backplane together while utilizing the standard SCSI cable for
attachment of the repeater card to one of the onboard SCSI connectors or that of an optional RAID adapter.
66
xSeries 340 / Netfinity 4500R I/O Options
Part
Number
Description
Adapter
Length
PCI
Support
Slots
Supported
Storage Controllers1
37L6091
ServeRAID-4L Ultra160 SCSI Controller2
Full
32/64-bit
1 ... 5
37L6080
ServeRAID-4M Ultra160 SCSI Controller3
Full
32/64-bit
1 ... 5
37L6889
ServeRAID-4H Ultra160 SCSI Controller4
Full
32/64-bit
1 ... 5
19K4646
PCI Wide Ultra160 SCSI Adapter5
Half
32/64-bit
1 ... 5
02K3454
PCI Fast/Wide Ultra SCSI Adapter6
Half
32-bit
1 ... 5
-
35421RU
FAStT200 Storage Server
-
-
-
35422RU
FAStT200 HA Storage Server
-
-
-
35341RU
SAN Fibre Channel Managed Hub
-
-
-
2109S08
SAN Fibre Channel Switch, 8-Port
-
-
-
2109S16
SAN Fibre Channel Switch, 16-Port
-
-
-
2108R3L
SAN Data Gateway Router Ultra SCSI LVD Port8
-
-
-
Networking9
Ethernet
34L4601
Netfinity 10/100 Ethernet Security Adapter
Half
32/64-bit
1 ... 5
19K4401
Netfinity Gigabit Ethernet Adapter (copper)
Half
32/64-bit
1 ... 5
06P3601
10/100 Ethernet Server Adapter
Half
32-bit
1 ... 5
06P3701
Gigabit Ethernet SX Server Adapter (fiber)
Half
32/64-bit
1 ... 5
10/100 EtherLink Server Adapter by 3Com
Half
32-bit
1 ... 5
09N9901
All Slots - Full Length
1 ... 5
-
Slot 4- Bus B, 33MHz, 64-bit, 5V or Universal
32/64-bit
-
Slot 5- Bus B, 33MHz, 64-bit, 5V or Universal
Half
Slot 3- Bus B, 33MHz, 64-bit, 5V or Universal
Netfinity FAStT Host Adapter
FAStT500 Storage Server
Slot 2- Bus A, 33MHz, 32-bit, 5V or Universal
00N6881
35521RU
Slot 1- Bus A, 33MHz, 32-bit, 5V or Universal
Fibre Storage Controllers and Options7
Exterior Connector Access
Token Ring
34L0701
Token-Ring 16/4 PCIAdapter 2 with Wake on LAN10
Half
32-bit
1 ... 5
34L5001
16/4 Token-Ring PCI Management Adapter10
Half
32-bit
1 ... 5
34L5201
High-Speed 100/16/4 Token-Ring PCI Management Adapter10
Half
32-bit
1 ... 5
Communications11
33L4618
PCI V.90 56 Data/Fax Modem12
Half
32-bit
1 ... 5
37L14xx
Serial I/O SST 8, 16 and 128 Port Adapters13
Half
32-bit
1 ... 5
Full
32-bit
1 ... 516
Systems Management14
01K7209
Netfinity Advanced System Management PCI Adapter15
03K9309
Netfinity Advanced System Management Interconnect Cable
Kit17
-
-
-
36L9654
Netfinity Adv8nced System Management Token-Ring
Connection18
-
-
-
9086001
Netfinity ESCON™ Adapter19
Full
32-bit
1 ... 520
IBM XSERIES 340
NETFINITY 4500R
Host Attach
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
67
1. xSeries 340 / Netfinity 4500R include a dual-port, dual-channel Ultra160 SCSI controller for internal use only. No standard external port is available. See “Internal SCSI Cabling” for
cabling alternatives. Due to xSeries / Netfinity 4500R’s low profile, some adapters with connectors on the top edge may not have sufficient clearance to attach a cable. Cabling
interferences are identified in the footnotes.
2. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides a single channel, 16MB of ECC cache and either one internal or one external
Ultra160 connection. External connector is 0.8mm VHDCI.
3. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides two channels, 64MB of battery-backed ECC cache and two external
0.8mm VHDCI Ultra160 connectors.
4. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266MHz PowerPC 750 processor and provides 128MB of battery-backed ECC cache. The internal connectors are not
accessible due to cabling interference. Four external Ultra160 0.8mm VHDCI connectors are available.
5. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external
connector with a 0.8mm VHDCI connector. Only one of the two connectors may be utilized.
6. PCI Fast/Wide Ultra SCSI Adapter provides one external 68-pin high density connector. The internal connectors are not accessible due to a cabling interference.
7. See Fibre Array Solutions section for additional configuration information.
8. The 2108R3L SAN Data Gateway Router Ultra SCSI LVD port replaces both the Single-ended and Differential SAN Data Gateway Routers (P/N 2108R3D and 2108R3S).
9. xSeries 340 / Netfinity 4500R include a full-duplex, 10/100Mbps Ethernet PCI controller.
10. The Wake on LAN function of this option is not supported by this server.
11. xSeries 340 / Netfinity 4500R include two USB ports, two serial and one parallel port.
12. Due to homologation variances, modem availability may differ by country.
13. See Appendix E for details on Serial I/O Options and configuration limitations.
14. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into xSeries 340 / Netfinity 4500R works with Netfinity Director to provide significant
system management function. When used with optional Netfinity Advanced System Management PCI Adapter (P/n 01K7209) and Netfinity Advanced System Management
Interconnect Cable Kit (P/N 03K9309) additional management and control of up to 12 service processors from a remote console through a single modem or LAN connection is
possible.
15. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56-watt AC adapter, which requires a separate power source. Provides an
integrated 10/100 Ethernet port and a PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection (P/N 36L9654).
16. A maximum quantity of one is supported.
17. Required for all xSeries and Netfinity Servers containing a standard Advanced System Management Processor that are to be interconnected for system management support
through a LAN or modem connection. Optional Netfinity Advanced System Management PCI Adapter (P/N 01K7209) includes the contents of this option. Up to 12 service processors
may be interconnected (including standard and optional processors) with an aggregate connection length of no more than 91.4m (300ft). A customer-supplied Ethernet cable is
required for each interconnection.
18. Contains an IBM Turbo 16/4 Token-Ring PCI card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter (P/N 01K7209), and a PC Card to
nine-pin D-Shell cable which is routed to an available adapter slot opening (reduces available slots by one). The Netfinity Advanced System Management PCI Adapter’s integrated
Ethernet port and Netfinity Advanced System Management Token-Ring Connection cannot be connected or used together.
19. Provides an ESCON MIC and a DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.
20. A maximum of two 9086001 adapters (installed in nonadjacent slots) are supported in a single server.
xSeries 340 / Netfinity 4500R Power, Monitor & Accessories
Part Number
Description
Power1
37L6880
270W Hot-Swap Redundant Power Supply
Uninterruptible Power Supply (UPS)2
94G6674
APC Smart-UPS 1400RMB3
94G6676
APC Smart-UPS 3000RMB3
37L6861
APC Smart-UPS 5000RMB4
Monitors5
633347N
E51 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6331N2N
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6332J1N
E74 Color Monitor 17in (403mm, 15.9in Viewable Image Size), stealth black6
66274AN
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black6
9511AG1
T54A TFT LCD Color Monitor (306mm x 230mm, 15in Viewable), stealth black7
1. xSeries 340 / Netfinity 4500R include a single 270W, hot-swap power supply and a single 9ft, 110V power cord with an
IEC 320-C13 connector on the system end and NEMA 5-15P on the other end. Power supply redundancy can be achieved
with the addition of optional 270W Hot-Swap Redundant Supply (P/N 37L6880).
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. xSeries 340 / Netfinity 4500R use an SVGA controller (S3 Savage4 chipset) with 8MB of video memory.
6. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity Rack
Keyboard Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
68
Part Number
Description
Rack and NetBAY1
930842P
Netfinity Enterprise Rack
930842X
Netfinity Enterprise Expansion Cabinet
9306900
Netfinity Rack
9306910
Netfinity Rack (includes perforated front door)
9306200
Netfinity NetBAY22
Keyboard and Mouse2
28L3644
Space Saver II Keyboard3, 5
01K1260
TrackPoint IV 104-Key Black Keyboard4, 5
28L3621
Preferred Keyboard (stealth black)4
28L3673
Sleek 2-Button Stealth Black Mouse
1. xSeries 340 / Netfinity 4500R are housed in a 19in rack mountable drawer and requires one of the
racks listed here. See IBM Netfinity Rack Cabinet and Options section for IBM rack supported
devices.
2. xSeries 340 / Netfinity 4500R ship without a keyboard or mouse.
3. Installation within a rack requires optional keyboard tray (P/N 28L4707) (stows in ready-to-use
position).
4. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot
share a keyboard tray with a flat panel display.
5. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
xSeries 340 / Netfinity 4500R Tape Options
Part
Number
Tape Drives
Bays
Supported
SCSI
Interface
(bit)
00N7991
20/40GB DDS/4 4mm Internal Tape Drive2
A, B
16 Ultra2 LVD
09N4040
20/40GB DLT Internal SCSI Tape Drive
A+B
8
00N7990
40/80GB DLT Internal SCSI Tape Drive2
A+B
16 Ultra2 LVD
00N8017
60/120GB 8mm M2 SCSI Tape Drive2
A, B
16 Ultra2 LVD
00N8016
100/200GB LTO Tape Drive2
A+B
16 Ultra2 LVD
A+B
16 Ultra2 LVD
-
Form
Factor
89mm (3.5in)
HH or 133mm
(5.25in) HH
133mm
(5.25in) FH
133mm
(5.25in) FH
133mm
(5.25in) HH
133mm
(5.25in) FH
Termination 68/50-pin
Ext Tape
Included Converter Enclosures
Incl
N3
N/A
35510011
N3
Y
3551001
N3
N/A
35510011
N3
N/A
35510011
N3
N/A
35510011
133mm
(5.25in) FH
N3
N/A
35510011
16
Diff
Rack
6U Rack
Y
Y
N/A
N/A
-
-
16
16 LVD
Rack
-
Y
N
N
N
3551001
-
16 LVD
Int
Y
N
3551001
Tape Autoloaders
00N7992
120/240GB DDS/4 Tape Autoloader2
4
External Tape Libraries
3502R14
3570C2X
DLT Tape Library
Magstar MP 3570 Tape Subsystem
3551001
10L7113
NetMEDIA Storage Expansion Unit EL5
NetMEDIA Systems Management Adapter6
10K2340
Media Bay Tray and LVD Cable Kit1, 2
External Tape Enclosures
Note: xSeries 340 / 4500R includes a single drop, 16-bit, single-ended, nonterminated SCSI cable for attachment of a device in Bay A or B to the second integrated Ultra160 SCSI channel
or supported adapter. No external SCSI port is available. All tape drives and enclosures are supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which has an external 0.8mm
VHDCI connector.
1. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) requires replacement of the standard single-ended internal cables with one or more
(depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop multi-mode terminated cable. If the standard cables are used
for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
2. LVD support for LVD devices requires installation of the 16-bit multi-mode terminated, two-drop, LVD SCSI cable included with optional Media Bay Tray and LVD Cable Kit (P/N 10K2340).
3. Termination requires installation of the multi-mode terminated, two-drop, LVD SCSI cable included with optional Media Bay Tray and LVD Cable Kit (P/N 10K2340).
4. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
5. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, 19in rack mountable tape enclosure which includes two full- high (FH) or four- half high (HH) extended length 133mm
(5.25in) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power
cords are also included. Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a 930842x rack.
6. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a 3551001 to provide repeater function, LVDS interface, aggregate cable lengths up to 12m when attached to
an LVD SCSI controller, and auto-termination when the 3551001 is powered off. External connector is 0.8mm VHDCI.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
69
IBM XSERIES 340
NETFINITY 4500R
Associated Options
xSeries 340 / Netfinity 4500R Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or
IBM Marketing Representative for assistance with your specific configuration requirements.
Internet Server
Part Number
Description
8656-5RY
33L3123
37L6080
37L7201
00N8017
10K2340
6331N2N
94G6674
37L6880
Netfinity 4500R Pentium III 933MHz/256KB L2, 128MB ECC, OPEN, 24X, PCI (Rack 3U)
128MB SDRAM ECC RDIMM II
ServeRAID-4M Ultra160 SCSI Controller
9.1GB Ultra160 SCSI Hot-Swap SL HDD
60/120GB 8mm M2 SCSI Tape Drive
Media Bay Tray and LVD Cable Kit
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
APC Smart-UPS 1400RMB
270W Hot-Swap Redundant Power Supply
9306200
28L3644
94G6670
Netfinity NetBAY22
Space Saver II Keyboard
Blank Filler Panel Kit
Quantity
1
11
1
32
1
1
1
1
1
Industry Standard 19in Rack, EIA-310D, min depth of 28in (711mm)
1
1
2
1. For a total of 256MB of system memory.
2. Three HDDs are used for RAID 5 protection. Effective capacity is two HDDs or 18.2GB.
An Internet server handles all requests from the Internet (Intranet or Extranet). Usually this type of server has the same characteristics as a file server. The main
difference is that an Internet server talks a different language (TCP/IP vs NETBEUI or IPX/SPX) and often needs to do an extra security check (firewall). In the case of
an Internet server, the server itself talks mostly to one client, the Internet Service Provider (ISP), instead of many clients as a file server does.
With this in mind the Netfinity 4500R was selected to provide an affordable price point for the growing Internet server market, 256MB of system memory (expandable
to 4GB), and availability features such as RAID-protected internal hot-swap storage and power protection with an APC Smart-UPS.
The network configuration depends on the method that will be used to connect the server to the Internet. Usually fast Ethernet routers are used, but if other methods
are used, you can add the appropriate adapter. The configuration includes a tape backup unit for secure backup of critical data in the event of a system or storage
failure.
Application Server
Part Number
Description
8656-6RY
19K4630
33L3125
37L6080
37L7202
00N8017
10K2340
6331N2N
37L6880
94G6674
xSeries 340 Pentium III 1GHz/256KB L2, 128MB ECC, OPEN, 24X, PCI (Rack 3U)
xSeries1GHz Upgrade with 133 FSB and 256KB Advanced Transfer Cache Pentium III Processor
256MB 133MHz SDRAM ECC RDIMM II
ServeRAID-4M Ultra160 SCSI Controller
18.2GB Ultra160 SCSI Hot-Swap SL HDD
60/120GB 8mm M2 SCSI Tape Drive
Media Bay Tray and LVD Cable Kit
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
Netfinity 270W Hot-Swap Redundant Power Supply
APC Smart-UPS 1400RMB
9306200
28L3644
94G6670
Netfinity NetBAY22
Space Saver II Keyboard
Blank Filler Panel Kit
Quantity
1
1
11
1
32
1
1
1
1
1
Industry Standard 19in Rack, EIA-310D, min depth of 28in (711mm)
1
1
2
1. For a total of 384MB of system memory.
2. Three HDDs are used for RAID 5 protection. Effective capacity is two HDDs or 36.4GB.
An application server is designed to handle a high workload while providing application serving requirements for users. With this in mind, the xSeries 340 was
selected to provide an affordable price point for an application server with two-way Pentium III processing, 384MB of system memory (expandable to 4GB), and
availability features such as battery-backed cache, RAID-protected internal hot-swap storage and power protection with an APC Smart-UPS.
xSeries 340 High Availability Cluster (P/N 25P1823 and 25P1824)1
(Refer to High Availability and Scalable Cluster Solutions section)
1. P/N 25P1823 includes Windows NT EE as the operating system for this integrated rack solution. P/N 25P1824 uses Windows 2000 Advanced Server.
70
IBM XSERIES 340
NETFINITY 4500R
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
71
IBM xSeries 350 and Netfinity 6000R
)
)
or
l) Max
)
ns
)
aid
/
)
ss
ID
d)
a
v
x
x
r
e
)
A
F
t
a
A
a
R
,
M
da
oc
/M
al/ (S
/M
a,
IM
DD
Pr
an
td
ot ive
td
ltr
2
(TD
r
(S
RD
, H l, St
nt ps)
(S
U
s
e
s
)
y
=
,
s
t
b
z
y k
r
a
it
m
al
R
lo
nt
Ba is
g e t (M (D u
MH sso
)(
ion
8
,S
)
ua
ia r d D
l)
pt
n a r ne
ax
er
d ( oce
r
5
e
d
Q
a
e
O
t
e
ail vai
w
M
e
a
(
e
l
/
a
M the
r
Ml H
E)
pe f Pr ch
y
r
ol
Po
td
ply
/Av al/A
r
(
c
o
S
l
D
m
lD
e
be
p
S
t
a
t
E
I
a
l
n
(
a
a
e
o
(
p
u
n
c
t
t
m
a
d
or r C C
y
w
ot
ab r n
Fa
ys
Co
rS
wa und
ar
ss be
Nu
ra
or
(To (T
ov te
OM
SI
t-S
d
ce um 2 EC em
rt
v S nb o
we
hd
m In
rm
-R
ys lots
t
o
e
C
o
a
o
d
e
o
i
a
D
r
H
R
P
N
S
P
F
M
L
O
A
R
B
S
P
W
C
xSeries 350 / 6000R At-A-Glance
8682-1RY1
02-May
700
1/4
1MB 512MB(R)/16GB3 Rack (4U) 1/3
P, S,
H, F
S-Fans
O-Power4
Y 10/100 D,U160
2/0
0/218.4GB
40X-17X
8/66
6/6
8682-2RY1
02-May
700
1/4
2MB 512MB(R)/16GB3 Rack (4U) 1/3
P, S,
H, F
S-Fans
O-Power4
Y 10/100 D,U160
2/0
0/218.4GB
40X-17X
8/66
6/6
8682-4RY1, 7
-
700
1/4
1MB 512MB(R)/16GB3 Rack (4U) 1/3
P, S,
H, F
S-Fans
O-Power4
Y 10/100 D,U160
2/0
0/218.4GB
48X-20X
8/66
6/6
8682-5RY1, 7
-
700
1/4
2MB 512MB(R)/16GB3 Rack (4U) 1/3
P, S,
H, F
S-Fans
O-Power4
Y 10/100 D,U160
2/0
0/218.4GB
48X-20X
8/66
6/6
8682-6RY1, 7
-
900
1/4
2MB 512MB(R)/16GB3 Rack (4U) 1/3
P, S,
H, F
S-Fans
O-Power4
Y 10/100 D,U160
2/0
0/218.4GB
48X-20X
8/66
6/6
1. Housed in a 19in rack-mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “xSeries 350 and Netfinity 6000R Power, Monitor & Accessories”
for supported IBM racks.
2. Intel Pentium III Xeon processor with full speed ECC L2 cache and 100MHz access to memory and I/O buses. IBM intends to make available an xSeries 350 model containing an Intel
800MHz/2MB L2 Cache Pentium II Xeon processor when Intel makes this processor generally available to the marketplace.
3. Advanced Chipkill ECC memory corrects two-, three-, and four-bit memory errors.
4. N+1 power supply redundancy requires a minimum of one optional 270W Hot-Swap Redundant Power Supply (P/N 37L6880). Robust configurations may require two. See “Power” under
“Netfinity 6000R Power, Monitor & Accessories” for additional information.
5. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
6. xSeries 350 / Netfinity 6000R includes three hot-swap bays. Optional Netfinity 3-Pack Ultra 160 Hot-Swap Expansion Kit (P/N 33L5050) expands the total hot-swap bays to six.
7. This model is an IBM xSeries 350.
8. Not available from IBM after this date. Business Partner inventory may be available.
xSeries 350 and Netfinity 6000R Processor Upgrades
Part
Number
Processor Upgrades with Full Speed Cache
SMP
Support1
Processor
Speed Upgrade2
00N7946
Netfinity 700MHz/1MB Upgrade with Pentium III Xeon Processor
1RY, 4RY
-
00N7944
Netfinity 700MHz/2MB Upgrade with Pentium III Xeon Processor
2RY, 5RY
1RY, 4RY
19K4633
900MHz/2MB Upgrade with Pentium III Xeon Processor
6RY
1 ... 5RY
1. Three additional processors may be installed, providing a maximum of four. All processors must be identical in type, speed, and cache size.Processors must
be installed in numerical order from slot one to slot four.
2. Requires removal of the standard processor. A maximum of four processors may be installed. All processors must be identical in type, speed and cache size.
Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.pc.ibm.com/support and enter machine “Type-Model” in Quick Path.
Select “Downloadable files” then “BIOS.”
72
Total Memory1
Set 1- J9
Set 2- J10
Set 3- J11
Set 4- J12
Std RDIMM
Set 1- J13
Set 2- J14
Set 3- J15
Set 4- J16
Std RDIMM
Set 1- J1 Std RDIMM
Set 2- J2
Set 3- J3
Set 4- J4
Set 1- J5
Set 2- J6
Set 3- J7
Set 4- J8
Std RDIMM
Quantity of RDIMMs Added2
128MB
(33L3113)
256MB
(33L3115)
512MB
(33L3117)4
1GB
(33L3119)
512MB
4 x 128
RDIMMs
standard
-
-
-
1GB
4
-
-
-
1.5GB
-
4
-
-
2GB
4
4
-
2.5GB
-
8
-
-
3GB
4
-
4
-
4GB
4
4
4
-
5GB
4
-
8
-
All RDIMMs installed in each set must be the same
6GB3
-
8
8
-
size, but all the sets do not have to contain RDIMMs
7GB3
-
4
12
-
of the same size. Install RDIMM sets in numerical
8GB3
-
-
16
-
sequence from one to four.
IBM XSERIES 350
AND NETFINITY 6000R
xSeries 350 and Netfinity 6000R Memory
9GB
4
-
-
8
10GB3
-
-
12
4
12GB3
-
-
8
8
14GB3
-
-
4
12
16GB3 (max)
-
-
-
16
This table does not represent all possible memory configurations. Memory modules may vary in price per MB.
Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating system
specifications for further information.
2. To obtain the quantity of memory identified in the “Total Memory” column, select the appropriate row and order the
quantity of RDIMMs identified in all columns for that row. Example: For 2GB, order 4 x 33L3113 plus 4 x 33l3115.
3. Requires removal of standard RDIMMs.
4. The 2GB memory option (P/N 33L3147), each of which includes four 512MB RDIMMs, can be substituted for a
quantity of four 512MB (P/N 33L3117) RDIMMs.
Memory Description1
Part Number
33L3113
Netfinity 128MB, 100MHz ECC SDRAM RDIMM
33L3115
Netfinity 256MB, 100MHz ECC SDRAM RDIMM
33L3117
Netfinity 512MB, 100MHz ECC SDRAM RDIMM2
33L3119
Netfinity 1GB 100MHz ECC SDRAM RDIMM
33L3147
2GB 100MHz ECC SDRAM RDIMM Kit (4 x 512MB)2
1. Due to four-way interleaving all RDIMMs installed in each set must be the same size, but all the sets do not have to
contain RDIMMs of the same size. Install RDIMM sets in numerical sequence from one to four. Chipkill support is
provided on the memory card.
2.Due to the new technology used by the 512MB RDIMMs contained in P/N 33L3147, they should not be mixed within
a set with Netfinity 512MB 100MHz ECC SDRAM RDIMM (P/N 33L3117).
xSeries 350 and Netfinity 6000R Hard Disk Drive (HDD) Storage
Total Int
Storage1
7200RPM HDDs
10,000RPM HDDs
15,000RPM HDDs
9.1GB
18.2GB
36.4GB
9.1GB
18.2GB
36.4GB
(37L7201)
(37L7202)
(37L7203)
(37L7204)
(37L7205)
(37L7206)
0GB
9.1GB
18.2GB
(19K0655) (19K0656)
Standard on base models
9.1GB
1
-
-
1
-
-
1
-
18.2GB
2
1
-
2
1
-
2
1
27.3GB
3
-
-
3
-
-
3
-
36.4GB
42
2
1
42
2
1
42
2
45.5GB
52
-
-
52
-
-
52
-
54.6GB
62
3
-
62
3
-
62
3
72.8GB
-
42
2
-
42
2
-
42
2
2
91GB
-
5
-
-
5
-
-
52
109.2GB
-
62
3
-
62
3
-
62
145.6GB
-
-
42
-
-
42
-
-
-
2
-
-
52
-
-
182GB
Updated 03/22/01
-
5
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
73
218.4GB
(max)
-
62
-
-
62
-
-
-
This table does not represent all possible HDD configurations.
1. Select a total storage row and then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal
Storage listed is within +/- 0.2GB unless otherwise noted.
2. Requires Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050).
Bay
Form
Factor
Height
Front
Access
Usage
Part
Number
Description
RPM
Height
Bays
Max
Supported1 Qty
Ultra160 Hard Disk Drives (HDD)
-
89mm
(3.5in)
SL
Yes
Diskette
-
133mm (5.25in)
HH
Yes
IDE CDROM
37L7201
9.1GB Ultra160 SCSI Hot-Swap SL
HDD
7200
SL
1 ... 6
61
1 ... 3
HS
SL1
Yes
Open
37L7202
18.2GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
1 ... 6
61
4 ... 62
HS
SL1
Yes
Open
37L7203
36.4GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
1 ... 6
61
37L7204
9.1GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
1 ... 6
61
37L7205
8.2GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
1 ... 6
61
37L7206
36.4GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
1 ... 6
61
19K0655
9.1GB 15Krpm Ultra160 SCSI HotSwap HDD
15000
SL
1 ... 6
61
19K0656
18.2GB 15Krpm Ultra160 SCSI
Hot-Swap HDD
15000
SL
1 ... 6
61
1. Half-high (HH) devices are NOT supported.
2. To enable Bays 4 ... 6, optional Netfinity 3-Pack Utra160 Hot-Swap
Expansion Kit (P/N 33L5050) is required.
Diskette
CD-ROM
Bay 1
Bay 4
Bay 2
Bay 5
Bay 3
Bay 6
To enable Bays 4 ... 6, optional Netfinity 3-Pack Ultra160
Hot-Swap Expansion Kit (P/N 33L5050) is required.
External Storage
Expansion Units3
Form Factor
35311RU
EXP300 Storage Expansion Unit4
Rack (3U)
35601RU
FAStT EXP500 Storage Expansion
Unit5
Rack (3U)
Server6, 7
35421RU
FAStT200 Storage
35422RU
FAStT200 HA Storage Server6
19K1121
FAStT200 Redundant RAID
Controller
Rack (3U)
Rack (3U)
-
1. xSeries 350 / Netfinity 6000R ships with bays one to three enabled. To enable installation of greater than three
HDDs requires Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050).
2. Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050) includes a hot-swap backplane and
associated components for two cabling options. Within the option are two 16-bit LVD SCSI cables. One can be
attached from the 3-pack Ultra160 Hot-Swap backplane to the second connector of the dual-channel Ultra160
SCSI controller, the other, through the use of a repeater card included with the option, can be cabled directly to
the standard backplane. Utilizing the second channel will eliminate the possibility of attaching external devices to
that channel.
3. Not supported by the onboard external SCSI port. To configure a SCSI storage device, select an optional SCSI
controller then refer to Appendix D: Cables - Storage Units - Controllers to confirm the controller supports the
desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit
options, see the specific expansion unit section. For Fibre Channel storage devices, refer to the Fibre Array
Solutions section.
4. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each
with its own power cord.
5. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each
with its own power cord.
6. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power
cord.
7. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID
Controller (P/N 19K1121).
Netfinity 6000R Internal SCSI Cabling
The Netfinity 6000R contains a DASD backplane supporting three hot-swap, SCA-2 compliant drive bays. The backplane is connected to one of the internal
connectors of the integrated dual-channel Ultra160 SCSI controller through a 16-bit LVD SCSI cable. An optional Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit
(P/N 33L5050) can be installed to provide additional internal HDD storage capacity. Within this option are two 16-bit LVD SCSI cables. One can be attached from the
3-Pack Ultra Hot-Swap backplane to the second connector of the dual-channel Ultra160 SCSI controller, the other, through the use of a repeater card included with
the option, can be cabled directly to the standard backplane.
In configurations where external SCSI device attachment is required instead of additional internal HDD storage, a second 16-bit LVD SCSI cable is included with the
server. One end of the cable can be attached to the second Ultra160 connector and the other is attached to the external 0.8mm VHDCI connector on the back of the
chassis. This provides an external connection to support LVDS devices.
74
Part
Number
Description
Adapter
Length
PCI
Support
Slots
HotPCI
MHz
Supported1 Plug2 Voltage
Key
Storage Controllers3
37L6091
ServeRAID-4L Ultra160 SCSI Controller4
Full
32/64-bit
1 ... 67
X
Universal
37L6080
ServeRAID-4M Ultra160 SCSI
Controller5
Full
32/64-bit
1 ... 67
X
Universal
33
37L6889
ServeRAID-4H Ultra160 SCSI Controller6
Full
32/64-bit
1 ... 67
X
Universal
33
02K3454
PCI Fast/Wide Ultra SCSI Adapter
Half
32-bit
1, 5, 6
-
5
33
19K4646
PCI Wide Ultra160 SCSI Adapter8
Half
32/64-bit
1 ... 6
-
Universal
66
33
Fiber Storage Controllers and Options9
00N6881
Netfinity FAStT Host Adapter
Half
32/64-bit
1 ... 6
X
Universal
66
35521RU
FAStT500 Storage Server
-
-
-
-
-
-
35421RU
FAStT200 Storage Server
-
-
-
-
-
-
35422RU
FAStT200 HA Storage Server
-
-
-
-
-
-
35341RU
SAN Fibre Channel Managed Hub
-
-
-
-
-
-
2109S08
SAN Fibre Channel Switch, 8-Port
-
-
-
-
-
-
2109S16
SAN Fibre Channel Switch, 16-Port
-
-
-
-
-
-
2108R3L
SAN Data Gateway Router Ultra SCSI LVD Port10
-
-
-
-
-
-
Networking11
Ethernet
09N9901
Netfinity 10/100 EtherLink Server Adapter by 3Com
Half
32-bit
1 ... 67
X
Universal
33
34L4601
Netfinity 10/100 Ethernet Security Adapter
Half
32/64-bit
1 ... 67
X
Universal
33
19K4401
Netfinity Gigabit Ethernet Adapter (copper)
Half
32/64-bit
1 ... 67
X
Universal
33
06P3601
10/100 Ethernet Server Adapter
Half
32-bit
1 ... 67
X
Universal
33
06P3701
Gigabit Ethernet SX Server Adapter (fiber)
Half
32/64-bit
1 ... 6
X
Universal
66
Token Ring
34L0701
Token-Ring 16/4 PCI Adapter 2 with Wake on LAN12
Half
32-bit
1 ... 67
X
Universal
33
34L5201
High-Speed 100/16/4 Token-Ring PCI Management Adapter12
Half
32-bit
1 ... 67
X
Universal
33
Communications13
33L4618
PCI V.90 56 Data/Fax Modem14
Half
32-bit
1, 5, 6
-
5
33
37L14xx
Serial I/O SST 8, 16, and 128 port adapters15
Half
32-bit
1, 5, 615
-
5
33
Systems Management16
01K7209
Netfinity Advanced System Management PCI Adapter17
Full
32-bit
1, 5, 618
-
5
33
03K9309
Netfinity Advanced System Management Interconnect Cable Kit19
-
-
-
-
-
-
36L9654
Netfinity Advanced System Management Token-RIng Connection20
-
-
-
-
-
-
1.The 5V - 33MHz slots support Universal or 5V adapters. A universal voltage-66MHz adapter plugged into these slots will operate at 33MHz.The 3.3V slots support universal or 3.3V
adapters. A universal voltage-33MHz adapter plugged into these slots limits a 66MHz PCI adapter installed on the same bus to 33MHz.
2. All six slots are full-length hot-plug capable using IBM’s Active PCI technology. For Network Operating System support, access www.pc.ibm.com/us/compat
3. xSeries 350 / Netfinity 6000R includes a dual-port, dual-channel Ultra160 SCSI controller. See “Internal SCSI Cabling” for cabling alternatives.
4. ServeRAID-4L Ultra160 SCSI controller is powered by a 100MHz Intel i960 processor and provides a single channel, 16MB of ECC cache and either one internal or one external Ultra160
connection. External connector is 0.8mm VHDCI.
5. ServeRAID-4M Ultra160 SCSI controller is powered by a 100MHz Intel i960 processor and provides two channels, 64MB of battery-backed ECC cache and two internal and two external
Ultra160 connectors (only two connectors may be utilized). External connectors are 0.8mm VHDCI.
6. ServeRAID-4H Ultra160 SCSI controller is powered by a 266MHz PowerPC 750 processor and provides 128MB of battery-backed ECC cache with two internal and up to four external
Ultra160 connectors (only four connectors may be utilized). External connectors are 0.8mm VHDCI.
7. Installation of a 33MHz adapter into a Bus B 66MHz slot will slow operation of all Bus B slots to 33MHz.
8. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector
with a 0.8mm VHDCI connector. Only one of the two connectors may be utilized.
9. See Fibre Array Solutions section for additional configuration information.
10. The 2108R3L SAN Data Gateway Router Ultra SCSI LVD port replaces both the Single-ended and Differential SAN Data Gateway Routers (P/N 2108R3D and 2108R3S).
11. xSeries 350 / Netfinity 6000R has an integrated 10/100 PCI Ethernet Controller.
12. The Wake on LAN function of this option is not supported by this server.
13. xSeries 350 / Netfinity 6000R includes two USB ports, two serial and one parallel port.
14. Due to homologation variances, modem availability may differ by country.
15. See Appendix E for details on Serial I/O options and configuration limitations. A maximum of four Serial I/O adapters (any combination of P/Ns 37L1414, 37L1415, 37L1416, 37L1423) may
be installed.
16. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into xSeries 350 / Netfinity 6000R works with Netfinity Director to provide significant system
management function. When used with optional Netfinity Advanced System Management PCI Adapter (P/N 01K7209) and Netfinity Advanced System Management Interconnect Cable Kit
(P/N 03K9309) additional management and control of up to 12 service processors from a remote console through a single modem or LAN connection is possible.
17. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56W AC adapter which requires a separate power source. Provides an integrated
10/100 Ethernet port and PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection (P/N 36L9654).
18. A maximum quantity of one is supported.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
75
IBM XSERIES 350
AND NETFINITY 6000R
xSeries 350 and Netfinity 6000R I/O Options
All Slots- Full Length, Active PCI
Slot 6- Bus C- 33MHz, 64-bit, 5V or Universal
Slot 5- Bus C- 33MHz, 64-bit, 5V or Universal
Slot 4- Bus B- 66MHz, 64-bit, 3.3V or Universal
Slot 3- Bus B- 66MHz, 64-bit, 3.3V or Universal
Slot 2- Bus B- 66MHz, 64-bit, 3.3V or Universal
Slot 1- Bus A- 33MHz, 32-bit, 5V or Universal
19. Required for all xSeries and Netfinity servers containing a standard Advanced System Management Processor that are to be interconnected for system management support through a
LAN or modem connection. Optional Netfinity Advanced System Management PCI Adapter (P/N 01K7209) includes the contents of this option. Up to 12 service processors may be
interconnected (including standard and optional processors) with an aggregate connection length of no more than 91.4m (300ft). A customer-supplied Ethernet cable is required for each
interconnection.
20. Contains an IBM Turbo 16/4 Token-Ring PCI Card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter, and a PC Card to 9-pin D-Shell cable
which is routed to an available adapter slot opening (reduces available slots by one). The Netfinity Advanced System Management PCI Adapter’s integrated Ethernet port and Netfinity
Advanced System Management Token-Ring Connection cannot be connected or used together.
Exterior Connector Access
xSeries 350 and Netfinity 6000R Power, Monitor & Accessories
Part Number
Description
Power1
37L6880
270W Hot-Swap Redundant Power Supply2
Uninterruptible Power Supply (UPS)3
94G6674
APC Smart-UPS 1400RMB4
94G6676
APC Smart-UPS 3000RMB4
37L6861
APC Smart-UPS 5000RMB5
Monitors6
633347N
E51 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black7
6331N2N
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black7
6332J1N
E74 Color Monitor 17in (403mm, 15.9in Viewable Image Size), stealth black7
66274AN
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black7
9511AG1
T54A TFT LCD Color Monitor (306mm x 230mm, 15in Viewable), stealth black8
1. xSeries 350 / Netfinity 6000R systems include a single 270W, hot-swap power supply and two 9ft power cords, one high
voltage IEC 320-C13 and one low voltage IEC 320-C13 to NEMA 5-15P. N+1 power supply redundancy may be achieved with the
addition of optional 270W Hot-Swap Redundant Power Supply (P/N 37L6880). Redundancy for configurations of greater than
270W requires installation of a second optional supply. To assist in determining when an additional power supply is required to
preserve redundancy, a “Non-Redundant LED” is a standard feature of the Netfinity 6000R. The following table is provided as a
reference.
Number of
Power Supplies
System Configuration Supported
Non-Redundant
Up to two processors
1
Up to three PCI adapters
Up to three HDDs
Up to eight memory RDIMMs
76
Part Number
IBM XSERIES 350
AND NETFINITY 6000R
2. 270W Hot-Swap Redundant Power Supply (P/N 37L6880) includes a single low voltage 9ft power cord.
3. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
4. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
5. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
6. xSeries 350 / Netfinity 6000R uses an SVGA controller (S3 Savage4 chipset) with 8MB of video memory.
7. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
8. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity Rack
Keyboard Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
Description
Rack and NetBAY1
930842P
Netfinity Enterprise Rack
930842X
Netfinity Enterprise Expansion Cabinet
9306900
Netfinity Rack
9306910
Netfinity Rack (includes perforated front door)
36L9703
Netfinity Rack Extension Kit
9306200
Netfinity NetBAY22
36L9702
Netfinity NetBAY22 Rack Extension Kit
Keyboard and Mouse2
28L3644
Space Saver II Keyboard3, 4
01K1260
TrackPoint IV 104-Key Black Keyboard4, 5
28L3621
Preferred Keyboard (stealth black)5
28L3673
Sleek 2-Button Stealth Black Mouse
1. xSeries 350 / Netfinity 6000R is housed in a 19in rack mountable drawer and requires one of the
racks listed here. See “IBM Netfinity Rack Cabinet and Options” section for IBM rack supported
devices.
2. xSeries 350 / Netfinity 6000R ships without a keyboard or mouse.
3. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use”
position).
4. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
5. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share
a keyboard tray with a flat panel display.
xSeries 350 and Netfinity 6000R Tape Options
Part
Number
Tape Drives
Bays
Supported
SCSI
Interface
(bit)
00N7991
20/40GB DDS/4 4mm Internal Tape Drive
N/A1
16 Ultra2 LVD
09N4040
20/40GB DLT Internal SCSI Tape Drive
N/A1
8
00N7990
40/80GB DLT Internal SCSI Tape Drive
N/A1
16 Ultra2 LVD
00N8017
60/120GB 8mm M2 SCSI Tape Drive
N/A1
16 Ultra2 LVD
00N8016
100/200GB LTO Tape Drive
N/A1
16 Ultra2 LVD
24P2396
100/200GB LTO Half-High Tape Drive
N/A1
16 Ultra2 LVD
00N7992
120/240GB DDS/4 Tape Autoloader
N/A1
16 Ultra2 LVD
3502R14
3570C2X
DLT Tape Library
Magstar MP 3570 Tape Subsystem
-
3551001
10L7113
NetMEDIA Storage Expansion Unit EL4
NetMEDIA Systems Management Adapter5
10K2340
Media Bay Tray and LVD Cable Kit2
Form
Factor
89mm (3.5in)
HH or
133mm
(5.25in) HH
133mm
(5.25in) FH
133mm
(5.25in) FH
133mm
(5.25in) HH
133mm
(5.25in) FH
133mm
(5.25in) HH
Termination 68/50-pin
Included
Converter
Incl
Ext Tape
Enclosures
N
N/A
35510012
N
Y
3551001
N
N/A
35510012
N
N/A
35510012
N
N/A
35510012
N
N/A
35510012
133mm
(5.25in) FH
N
N/A
35510012
16
Diff
Rack
6U Rack
Y
Y
N/A
N/A
-
-
16
16 LVD
Rack
-
Y
N
N
N
3551001
-
16 LVD
Int.
Y
N
3551001
Tape Autoloaders
External Tape Libraries3
External Tape Enclosures
Associated Options
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
77
1. IBM xSeries 350 / Netfinity 6000R does not support internal tape drives. An external tape or tape enclosure must be used. If not used internally, the second integrated Ultra160 connector
may be routed to an external 0.8mm VHDCI connector with a cable included with the server. All tape drives and enclosures are supported by PCI Wide Ultra160 SCSI Adapter (P/N
19K4646) which has an external 0.8mm VHDCI connector. Select tape drive, enclosure and controller then use Appendix D: Cables-Storage Units-Controllers to select an appropriate
external cable.
2. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) requires replacement of the standard single-ended internal cables with one or more
(depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop mult-mode terminated cable. If the standard cables are used
for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, 19in rack mountable tape enclosure which includes two full-high (FH) or four half-high (HH) extended length 133mm
(5.25in) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power
cords are also included. Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a 930842x rack.
5. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a 3551001 to provide repeater function, LVDS interface, aggregate cable lengths up to 12M when attached to
an LVD SCSI controller, and auto-termination when the 3551001 is powered off. External connector is 0.8mm VHDCI.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or
IBM Marketing Representative for assistance with your specific configuration requirements.
Internet Server
Part Number
8682-1RY
37L6091
33L5050
37L7201
00N8017
10K2340
3551001
03K9310
6331N2N
94G6674
Description
Netfinity 6000R 700/1MB Xeon, 512MB(R) ECC, Open, 40X, PCI (Rack 4U)
ServeRAID-4L Ultra160 SCSI Controller
Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit
Netfinity 9.1GB Ultra160 SCSI Hot-Swap SL HDD
60/120GB 8mm M2 SCSI Tape Drive
Media Bay Tray and LVD Cable Kit
NetMEDIA Storage Expansion Unit EL
2M External Ultra2 SCSI Cable
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
APC Smart-UPS 1400RMB
Quantity
1
1
1
41
1
1
1
1
1
1
Industry Standard 19in Rack, EIA-310D, min depth of 28in (711mm)
9306200
28L3644
94G6670
Netfinity NetBAY22
Space Saver II Keyboard
Blank Filler Panel Kit
1
1
2
1. Four HDDs are used for RAID 5 protection. One HDD is identified as a hot-spare. Effective capacity is two HDDs or 18.2GB
An Internet server handles all requests from the Internet (Intranet or Extranet). Usually, this type of server has the same characteristics as a file server. The main
difference is that an internet server talks a different language (TCP/IP vs NETBEUI or IPX/SPX) and often needs to do an extra security check (firewall). In the case of
an Internet server, the server itself talks mostly to one client, the Internet Service Provider (ISP), instead of many clients as a file server does.
With this in mind, the IBM Netfinity 6000R was selected to provide an affordable price point for the growing Internet server market, 512MB of system memory
(expandable to 16GB), and availability features such as RAID protected internal hot-swap storage and power protection with an APC Smart-UPS.
The network configuration depends on the method that will be used to connect the server to the Internet. Usually fast ethernet routers are used, but if other methods
are used, you can add the appropriate adapter. The configuration includes a tape backup unit for secure backup of critical data in the event of a system or storage
failure.
Application Server
Part Number
8682-2RY
00N7944
33L3113
33L3115
33L5050
37L7203
37L6080
00N7990
10K2340
3551001
10L7113
03K9310
6331N2N
94G6674
37L6880
9306200
28L3644
94G6670
Description
Netfinity 6000R 700/2MB Xeon, 512MB(R) ECC, Open, 40X, PCI (Rack 4U)
Netfinity 700MHz/2MB Upgrade with Pentium III Xeon Processor
Netfinity 128MB, 100MHz ECC SDRAM RDIMM
Netfinity 256MB, 100MHz ECC SDRAM RDIMM
Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit
Netfinity 36.4GB Ultra160 SCSI Hot-Swap SL HDD
ServeRAID-4M Ultra160 SCSI Controller
40/80GB DLT Internal SCSI Tape Drive
Media Bay Tray and LVD Cable Kit
NetMEDIA Storage Expansion Unit EL
NetMEDIA Systems Management Adapter
Netfinity 2M Ultra2 SCSI Cable
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
APC Smart-UPS 1400RMB
Netfinity 270W Hot-Swap Redundant Power Supply
Industry Standard 19in Rack, EIA-310D, min depth of 28in (711mm)
Netfinity NetBAY22™
Space Saver II Keyboard
Blank Filler Panel Kit
1. For a total of 2GB of system memory.
2. Four HDDs are used for RAID 5 protection. Effective capacity is three HDDs or 109.2GB
78
Quantity
1
3
41
41
1
42
1
1
1
1
1
1
1
1
2
1
1
2
IBM XSERIES 350
AND NETFINITY 6000R
An application server is designed to handle a high workload while providing application serving requirements for users. With this in mind, the IBM Netfinity 6000R was
selected to provide an affordable price point for an application server with four-way Pentium III Xeon processing, 2GB of system memory (expandable to 16GB), and
availability features such as battery-backed cache RAID protected internal hot-swap storage and power protection with an APC Smart-UPS.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
79
IBM xSeries 370 and Netfinity 8500R
3
)
r
)
)
)
ns
so
ax
ail
x)
D)
rd
Fa
es
)
a
M
/
,
AI
c
d
/Av d/Ma
M
d
D
l
R
o
n
t
r
a
,
M
D
t
t
P )
2
a
ta
(S
H
DI
(S
ltr
nt ps
(To
s,
z) r
l, S
ity
=R
ive
nt
lot
ys
me (Mb al, U
na
(R
r
MH sso
a
a
e
S
6
o
(
)
D
i
t
g
B
u
t
r,
d
e
)
e
Qu
)
ax
(D
na rne
ia
isk
Op
ee oc
at
we
ail
ly
/M
ail
4
ed
Ma the ller
he
y(
td
Sp f P r
lD
Av
Po
pp
Av
r
dD
)
/
c
M
/
(
c
r
S
a
l
r
l
u
o
o
r
E
E
(
m
a
n
p
S
tr
e
le
ta
a
ta
ct
so er o C C
Ha
be
aw
(ID
ry
st rd on
er
To
wa
ab
To
nd
Fa
m
es
dr
b
al
Sy boa I C
mo
ov
s(
t-S
s(
EC
du
m Pow
OM
oc u m
rn
Nu
ith
e
t
v
r
y
r
n
o
e
S
e
m
R
2
o
t
d
o
t
a
M
W
P
N
O
R
H
r
L
F
A
B
Sl
SC
Re
In
CD
Pa
)
ax
/M
td
S
s(
8681-7RY1
02-May
700
1/8
1MB
512MBR/32GB
Rack
(8U)
3/3
P, S, H, F
S-Fans,
S-Power
Y
-
D, U2
2/0
0/72.8GB
40X-17X
4/2
12/12
8681-8RY1
02-May
700
1/8
2MB
512MBR/32GB
Rack
(8U)
3/3
P, S, H, F
S-Fans,
S-Power
Y
-
D, U2
2/0
0/72.8GB
40X-17X
4/2
12/12
8681-1RX1, 5
-
700
1/8
1MB
512MBR/32GB
Rack
(8U)
3/3
P, S, H, F
S-Fans,
S-Power
Y
-
D, U2
2/0
0/72.8GB
48X-20X
4/2
12/12
8681-2RX1, 5
-
700
1/8
2MB
512MBR/32GB
Rack
(8U)
3/3
P, S, H, F
S-Fans,
S-Power
Y
-
D, U2
2/0
0/72.8GB
48X-20X
4/2
12/12
8681-3RX1, 5
-
900
1/8
2MB
512MBR/32GB
Rack
(8U)
3/3
P, S, H, F
S-Fans,
S-Power
Y
-
D, U2
2/0
0/72.8GB
48X-20X
4/2
12/12
1. Housed in a 19in rack-mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “xSeries 370 / Netfinity 8500R Power, Monitor &
Accessories” for supported IBM racks.
2. Intel Pentium III Xeon processor.
3. xSeries 370 / Netfinity 8500R includes a systems management adapter equivalent to the one shipped with option 01K7209 (Netfinity Advanced System Management PCI Adapter).
4. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
5. This model is an IBM xSeries 370.
6. Not available from IBM after this date. Business Partner inventory may be available.
xSeries 370 / Netfinity 8500R Processor Upgrades
Part
Number
Processor Upgrades with 1MB or 2MB Full Speed
Cache1
SMP Support2
Processor Speed/Cache
Upgrade3
10K2330
Netfinity 8500R 700MHz/1MB Upgrade with Pentium III Xeon Processor
7RY, 1RX
4 ... 6RY5
10K2166
Netfinity 8500R 700MHz/2MB Upgrade with Pentium III Xeon Processor
8RY, 2RX
4 ... 7RY5
19K4637
xSeries 370 900MHz/2MB Upgrade with Pentium III Xeon Processor
3RX
4 ... 8RY,
1RX, 2RX5
10K2335
Netfinity 4X Accelerator Filter
7RY, 8RY,
1 ... 3RX4
4 ... 7RY
Netfinity Mezzanine Expansion Kit
7RY, 8RY,
1 ... 3RX4
4 ... 7RY
10K2337
1. xSeries 370 / Netfinity 8500R architecture optimizes memory and bus performance using a 100MHz, five-port crossbar core chipset. Up to eight Pentium III Xeon processors are
supported on two 100MHz P-6 CPU buses. The recommended order of processor installation is: Sockets A1, A3, A2, A4, B1, B3, B2, B4.
2. Up to seven additional processors may be installed, providing a maximum of eight. All processors must be identical in type, speed, and cache size. The fifth through eighth processors
require a Netfinity Mezzanine Expansion Kit (P/N 10K2337)
3. Requires removal of the standard processor(s). A maximum of eight processors may be installed. Installation of greater than four processors requires the addition of a mezzanine board
and two cache coherency filters. Required options which provide the board and filters vary by model. For more information refer to “Processor Upgrade Requirements.” All processors
must be identical in type, speed and cache size. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.pc.ibm.com/support and enter machine “TypeModel” in Quick Path. Select “Downloadable files” and then “BIOS.”
4. The fifth through eigth processors require this option. See “Processor Upgrade Requirements” for more information on when this option is required.
5. Replacement of the standard processor mezzanine board and the mezzanine board from any installed enablement kit of 550MHz models is required. See “Processor Upgrade
Requirements” to determine specific model upgrade requirements.
Processor Upgrade Requirements1, 2
Upgrade To
Upgrade From
< 4 x 550MHz processors
> 4 x 550MHz processors
< 4 x 700MHz processors
> 4 x 700MHz processors
< 4 x 550MHz processors
-
1 x 28L4730 or 1 x 28L4727
1 x 10K23373
1 x 10K2335, 2 x 10K23373
> 4 x 550MHzprocessors
n/a
-
1 x 10K23373, 4
2 x 10K23373, 5
< 4 x 700MHz processors
n/a
n/a
-
1 x 10K2335, 1 x 10K2337
1. This table does not address the processor part numbers required. It does address the optional Enablement Kit, Filters, and Mezzanine Board part numbers required.
2. All processors must be identical in type, speed, and cache size. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.pc.ibm.com/support and enter
machine “Type-Model” in Quick Path. Select “Downloadable files” then “BIOS.”
3. Remove the standard processor mezzanine board.
4. Remove all optional Enablement Kit components.
5. Remove Enablement Kit mezzanine board. The Enablement Kit 4X cache coherency filters are supported for use with Netfinity Mezzanine Expansion Kit (P/N 10K2337).
80
xSeries 370 / Netfinity 8500R ships with a single mezzanine board containing four Pentium III Xeon processor sockets with
terminators in the unoccupied sockets. An additional mezzanine board may be added, expanding the number of processor
sockets to eight. The two mezzanine boards are then linked through two cache coherency filter cards, one for each
mezzanine board.
Option Content
Standard Mezzanine Board
A1
A2
A3
Optional Mezzanine Board
A4
Optional Cache
Coherency Filter
Cards
B1
A B
B2
B3
B4
Netfinity 4X Accelerator Filter (P/N 10K2335)
• Two cache coherency filter modules
• Requires Mezzanine Kit (P/N 10K2337)
Netfinity Mezzanine Expansion Kit (P/N 10K2337)
• One Processor Mezzanine Board
• Supports cache coherency filters from
the following options:
• P/N 10K2335
• P/N 28L4730
• P/N 28L4727
• Supports 700MHz and above processors
only
• Required when upgrading models
8681-4RY ... 6RY to 700MHz or above
• Required when adding fifth through eighth
processors rated at 700MHZ or above
IBM XSERIES 370 /
NETFINITY 8500R
xSeries 370 / Netfinity 8500R > 4-Way Enablement Kits
(P/N 28L4730 and P/N 28L4727)
•Support for 550MHz models only
•Required for installation of processors 5 ... 8.
•One Processor Mezzanine Board
•Two cache coherency filter modules
•28L4730 economical 1X (256K entries)
•28L4727 high performance 4X (1M entries)
•Filters may be used with Mezzanine Expansion
Kit (P/N 10K2337)
All installed processors must be identical in type, speed and
cache size. Upgrades may require a BIOS update. To obtain the
latest Flash BIOS, access www.pc.ibm.com/support and enter
machine “Type-Model” in Quick Path. Select “Downloadable files”
then “BIOS.”
Recommended order of
processor installation is:
Sockets A1, A3, A2, A4,
B1, B3, B2, B4
xSeries 370 / Netfinity 8500R Memory
Total
System
Memory
Std Models
512MB
(4 x 128)
128MB
(20L0245)
256MB
(20L0247)
512MB
(20L0249,
33L31497)
1GB
(33L3056)
640
768
1024
1280
1536
1792
2048
2560
2816
3072
3328
3584
4096
4608
5120
5632
6144
6656
7680
8192
8704
9728
10752
11776
12800
1
2 or
4 or
6 or
8 or
10 or
12 or
162 or
182 or
202 or
222 or
242 or
282 or
302 or
-
1
2 or
3
4 or
5
6 or
8 or
9
10 or
11
12 or
144 or
163
162 or
182 or
202 or
222 or
242 or
282 or
322, 3 or
-
1
2 or
3
4 or
5
6 or
7
8 or
9
10 or
11
12 or
144 or
163 or
162 or
182 or
202 or
222 or
242 or
1
2
3
4
5
6
7
83
8
9
10
11
12
Updated 03/22/01
Quantity of RDIMMs Added
Memory Card A- Std
Memory Card B- Optional
B1 Socket
A1 Socket Std RDIMM
A2 Socket
A3 Socket
A4 Socket
B2 Socket
B3 Socket
B4 Socket
A5 Socket Std RDIMM
A6 Socket
A7 Socket
A8 Socket
B5 Socket
B6 Socket
B7 Socket
B8 Socket
A9 Socket
A10 Socket
A11 Socket
A12 Socket
A13 Socket
A14 Socket
A15 Socket
A16 Socket
(J1-J16)
Std RDIMM
B9 Socket
B10 Socket
B11 Socket
B12 Socket
Std RDIMM
B13 Socket
B14 Socket
B15 Socket
B16 Socket
(J1-J16)
Recommended order of RDIMM population for
optimum cooling: 1, 5, 9, 13, 3, 7, 11, 15, 2, 6, 10, 14, 4,
8, 12, 16.
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
81
13824
14848
15488
16384
16896
18944
20992
23040
25088
27136
29184
30720
32768
-
262 or
282 or
322, 3 or
-
-
13
144
156
163
162
182
202
222
242
262
282
305
323
This table does not represent all possible memory configurations. Memory modules may vary in price per MB. Selection of smaller RDIMMs may provide a more costeffective alternative to using larger RDIMMs.
NOTE: Cache line interleaving may be enabled by installing Netfinity 8500R Memory Expansion Card (P/N 28L4454) with as few as two RDIMMs. Matched pairs must be
installed if the memory expansion card is present.
1. Network Operating Systems may limit the maximum amount of addressable memory. See the operating system specifications for further information.
2. Netfinity 8500R Memory Expansion Card (P/N 28L4454) is required for installation of greater than 16 RDIMMs.
3. Requires removal of standard memory.
4. Models with 4 x 128 RDIMMs standard require Netfinity 8500R Memory Expansion Card (P/N 28L4454) for installation of greater than 16 RDIMMs.
5. Requires removal of all but two of the standard RDIMMs.
6. Requires removal of all but one of the standard RDIMMs.
7. When P/N 33L3149 is installed in servers that have been upgraded with an optional memory card, RDIMMs must match in slot pairs from one card to another (size,
capacity and type).
Memory Description1
Part Number
20L0245
Netfinity 128MB SDRAM ECC RDIMM II
20L0247
Netfinity 256MB SDRAM ECC RDIMM II
20L0249
Netfinity 512MB SDRAM ECC RDIMM II
28L4454
Netfinity 8500R Memory Expansion Card2
33L3056
Netfinity 1GB SDRAM ECC RDIMM II
33L3149
512MB 100MHZ ECC SDRAM RDIMM3
1. xSeries 370 / Netfinity 8500R includes a single memory card with the ability to support up to 16GB of memory. All models contain four standard
RDIMMs. For memory installation of greater than 16GB, xSeries 370 / Netfinity 8500R Memory Expansion Card (P/N 28L4454) is required. Installation
of memory on systems containing a single memory card (standard on all models) has no restrictions on size or placement. When xSeries 370 /
Netfinity 8500R Memory Expansion Card (P/N 28L4454) is installed, the memory RDIMM in each socket of Card A must match the RDIMM in the
same socket on Card B. To enable cache line interleaving, both memory cards must be installed and configured identically.
2. Required for enablement of cache line interleaving or installation of greater than 16 RDIMMs. Configuration of the standard memory card (Card A)
and optional 28L4454 (Card B) must be identical.
3. Due to the new technology used by 512MB 100MHz ECC SDRAM RDIMM (P/N 33L3149), it should not be matched with Netfinity 512MB SDRAM
ECC RDIMM II (P/N 20L0249) when populating Memory Card B.
xSeries 370 / Netfinity 8500R Hard Disk Drive (HDD) Storage
Total Internal
Storage1
7200RPM HDDs
9.1GB
18.2GB
10,000RPM HDDs
36.4GB
9.1GB
18.2GB
15,000RPM HDDs
36.4GB
9.1GB
18.2GB
(37L7201)2 (37L7202)2 (37L7203)2 (37L7204)2 (37L7205)2 (37L7206)2 (19K0655)2 (19K0656)2
0GB
Standard on base models
9.1GB
1
-
-
1
-
-
1
-
18.2GB
2
1
-
2
1
-
2
1
36.4GB
-
2
1
-
2
1
-
2
72.8GB (max)
-
-
2
-
-
2
-
-
This table does not represent all possible HDD configurations.
1. Select a total storage row and then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal Storage
listed is within +/- 0.2GB unless otherwise noted.
2. xSeries 370 / Netfinity 8500R contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus speeds.
82
Form
Factor
Height
Front
Access
Usage
Part
Number
Description
RPM
Height
Bays
Max
Supported Qty
-
133mm
(5.25in)
HH
Yes
IDE CD-ROM
-
89mm
(3.5in)
SL
Yes
Diskette
37L7201
9.1GB Ultra160 SCSI Hot-Swap SL
HDD
7200
SL
1, 2
2
1 ... 2
HS
HH
Yes
Open
37L7202
18.2GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
1, 2
2
37L7203
36.4GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
1, 2
2
37L7204
9.1GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
1, 2
2
37L7205
18.2GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
1, 2
2
37L7206
36.4GB 10-K Ultra160 SCSI HotSwap SL HDD
10,000
SL
1, 2
2
19K0655
9.1GB 15Krpm Ultra160 SCSI HotSwap HDD
15,000
SL
1, 2
2
19K0656
18.2GB 15Krpm Ultra160 SCSI HotSwap HDD
15,000
SL
1, 2
2
NB3E1
19in Rack
3U
Yes
Open
1. A total of three optional 3U NetBAY3Es can be stacked beneath a
xSeries 370 / Netfinity 8500R which has Netfinity 8Ux28D Rack-to-Tower
Kit (P/N 28L4705) installed. See IBM Netfinity NetBAY3x Stackable
Enclosure section for supported devices.
CD-ROM
Hot-Swap (HS)
Diskette
Bay 1
Ultra160 HDDs1
External Storage Expansion
Units2
Bay 2
Netfinity NetBAY3E (NB3E)
(Optional)
(Requires Rack to
Tower Kit)
Unit3
Form Factor
35311RU
EXP300 Storage Expansion
09N7296
EXP300 Rack-to-Tower Conversion
Kit
-
35601RU
FAStT EXP500 Storage Expansion
Unit4
Rack (3U)
5, 6
IBM XSERIES 370 /
NETFINITY 8500R
Bay
Rack (3U)
35421RU
FAStT200 Storage Server
Rack (3U)
35422RU
FAStT200 HA Storage Server5
Rack (3U)
19K1121
FAStT200 Redundant RAID
Controller
-
1. xSeries 370 / Netfinity 8500R contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2
bus speeds.
2. Not supported by the onboard external SCSI port. To configure a SCSI storage device, select an optional
SCSI controller then refer to Appendix D: Cables - Storage Units - Controllers to confirm the controller supports
the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit
options, see the specific expansion unit section. For Fibre Channel storage devices, refer to the Fibre Array
Solutions section.
3. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each
with its own power cord. To convert an EXP300 to a tower form factor, Netfinity EXP300 Rack-to-Tower
Conversion Kit (P/N 09N7296) is required.
4. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each
with its own power cord.
5. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own
power cord.
6. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID
Controller (P/N 19K1121).
Internal SCSI Cabling
xSeries 370 / Netfinity 8500R systems contains an LVDS backplane supporting two hot-swap drive bays that support installation of up to two 3.5in, slim-high or halfhigh HDDs. The backplane is connected to the internal Wide Ultra2 SCSI controller through a 16-bit LVD SCSI cable. RAID support for the internal hot-swap drive
bays is provided by adding a supported RAID adapter and moving the standard SCSI cable from the onboard controller to the optional RAID controller. The standard
external Wide Ultra2 SCSI port uses a 0.8mm Very High Density Connector Interface (VHDCI).
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
83
.
xSeries 370 / Netfinity 8500R I/O Options
Part
Number
Description
Adapter
Length
PCI
Support
Slots
Supported1
HotPlug2
PCI Voltage
Key
MHz
Storage Controllers3
37L6080
ServeRAID-4M Ultra160 SCSI Controller4
Full
32/64-bit
1 ... 127
X
Universal
33
37L6889
ServeRAID-4H Ultra160 SCSI Controller5
Full
32/64-bit
1 ... 127
X
Universal
33
19K4646
PCI Wide Ultra160 SCSI Adapter6
Half
32/64-bit
1 ... 12
-
Universal
66
02K3454
PCI Fast/Wide Ultra SCSI Adapter
Half
32-bit
1 ... 5, 10 ... 12
-
5
33
66
Fibre Storage Controllers and Options8
00N6881
Netfinity FAStT Host Adapter
Half
32/64-bit
1 ... 12
X
Universal
35521RU
FAStT500 Storage Server
-
-
-
-
-
-
35421RU
FAStT200 Storage Server
-
-
-
-
-
-
35422RU
FAStT200 HA Storage Server
-
-
-
-
-
-
35341RU
SAN Fibre Channel Managed Hub
-
-
-
-
-
-
2109S08
SAN Fibre Channel Switch, 8-Port
-
-
-
-
-
-
2109S16
SAN Fibre Channel Switch, 16-Port
-
-
-
-
-
-
2108R3L
SAN Data Gateway Router Ultra SCSI LVD Port9
-
-
-
-
-
-
Networking10
Ethernet
09N9901
10/100 EtherLink Server Adapter by 3Com
Half
32-bit
1 ... 127
X
Universal
33
34L4601
Netfinity 10/100 Ethernet Security Adapter
Half
32/64-bit
1 ... 127
X
Universal
33
19K4401
Netfinity Gigabit Ethernet Adapter (copper)
Half
32/64-bit
1 ... 127
X
Universal
33
06P3601
10/100 Ethernet Server Adapter
Half
32-bit
1 ... 127
X
Universal
33
Gigabit Ethernet SX Server Adapter (fiber)
Half
32/64-bit
1 ... 12
X
Universal
66
Half
32-bit
1 ... 127
06P3701
Token Ring
34L0701
Token-Ring 16/4 PCI Adapter 2 with Wake on LAN11
X
Universal
33
34L5001
16/4 Token-Ring PCI Management Adapter
Half
32-bit
1 ... 127
X
Universal
33
34L5201
High-Speed 100/16/4 Token-Ring PCI Management
Adapter11
Half
32-bit
1 ... 127
X
Universal
33
11
12
Communications
33L4618
PCI V.90 56 Data/Fax Modem13
Half
32-bit
1 ... 5, 10 ... 12
-
5
33
37L14xx
Serial I/O SST 8, 16 and 128 Port Adapters14
Half
32-bit
(1 ... 5, 10 ... 12)14
-
5
33
-
-
-
-
-
-
Systems Management15
03K9309
84
Netfinity Advanced Systems Management Interconnect
Cable Kit16
36L9654
02K6545
Netfinity Advanced System Management Token-Ring
Connection17
UltraSlim 56W AC
-
-
-
-
-
-
-
-
-
-
-
-
Full
32-bit
(1 ... 5, 10 ... 12)20
-
5
33
Adapter18
9086001
Netfinity ESCON Adapter19
1. The P-6 I/O bus supports four independent 64-bit PCI buses, two of which drive eight 33MHz, 5V slots (1-5, 10-12), while the other two buses drive four 66MHz, 3.3V slots (6-9).
The 5V slots support Universal or 5V adapters. A 66MHz adapter plugged into these slots will operate at 33MHz. The 3.3V slots support Universal or 3.3V adapters. A 33MHz adapter plugged
into these slots limits a 66MHz PCI adapter installed on the same bus to 33MHz.
2. All 12 slots are hot-plug capable using IBM’s Active PCI technology. For Network Operating System support, access www.pc.ibm.com/us/compat.
3. xSeries 370 / Netfinity 8500R includes a dual-port, dual-channel, 64-bit Wide Ultra2 SCSI controller which supports either Single Ended (SE) or Low Voltage Differential SCSI (LVDS) modes.
One internal connector and one external port with a 0.-mm Very High Density Connection Interface (VHDCI) are standard. The internal LVD SCSI cable has sufficient length to attach to an
adapter located in slots 10 ... 12. If a boot device (internal or external) is to be attached to an adapter, the adapter must reside in slots 10 ... 12 due to BIOS scanning sequences.6.
4. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides two channels, 64MB of battery-backed ECC cache and two internal and two external
Ultra160 connectors (only two connectors may be utilized). External connectors are 0.8mm VHDCI.
5. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266MHz PowerPC 750 processor and provides 128MB of battery-backed ECC cache with two internal and up to four external
Ultra160 connectors (only four connectors may be utilized). External connectors are 0.8mm VHDCI.
6. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector
with a 0.8mm VHDCI connector. Only one of the two connectors may be utilized.
7. Installation of a 33MHz adapter into a Bus A 66MHz slot will slow operation of all Bus A slots to 33MHz.
8. See Netfinity Fibre Array Solutions section for additional configuration information.
9. The 2108R3L SAN Data Gateway Router Ultra SCSI LVD port replaces both the Single-ended and Differential SAN Data Gateway Routers (P/N 2108R3D and 2108R3S).
10. xSeries 370 / Netfinity 8500R does not include an onboard network controller.
11. The Wake on LAN function of this option is not supported by this server.
12. xSeries 370 / Netfinity 8500R includes two USB ports, two high-speed serial/asynchronous ports, (NS 16550A compatible), and one high-speed (up to 2MBps data transfer speed)
bidirectional parallel port supporting devices using ECP/EPP/SSP protocols adhering to the IEEE 1284 standard.
13. Due to homologation variances, modem availability may differ by country.
14. See Appendix E for details on Serial I/O options and configuration limitations. A maximum of four Serial I/O adapters (any combination of P/N 37L1414, 37L1415, 37L1416, 37L1423) may be
installed.
15. xSeries 370 / Netfinity 8500R ships standard with a Netfinity Advanced System Management PCI Adapter.
16. Required for all xSeries and Netfinity servers containing a standard Advanced System Management Processor that are to be interconnected for system management support through a
LAN or modem connection. Up to 12 service processors may be interconnected (including standard and optional processors) with an aggregate connection length of no more than 91.4m
(300ft). A customer-supplied Ethernet cable is required for each interconnection.
17. Contains an IBM Turbo 16/4 Token-Ring PCI Card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter and a PC Card to 9-pin D-Shell cable
which is routed to a rear chassis cut-out. The Netfinity Advanced System Management PCI Adapter’s integrated Ethernet port and Netfinity Advanced System Management Token-Ring
Connection cannot be connected or used together. To download the latest firmware, access www.ibm.com/pc/us/netfinity. Select “Server Support.” “Family,” “Model,” “Downloadable Files”
and finally “Advanced System Management.”
18. Although the xSeries 370 / Netfinity 8500R integrated Netfinity System Management PCI Adapter is powered continuously through the redundant power supply subsystem, an even higher
level of availability is offered with the addition of UltraSlim 56W AC Adapter by allowing an independent power source or connection to a separate optional UPS.
19. Provides an ESCON MIC and DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.
20. A maximum of two 9086001 adapters (installed in nonadjacent slots) are supported in a single server. Where possible, install in a minimally loaded bus.
Updated 03/22/01
Slot 12- Bus A- 33MHz- 5V or Universal
Slot 11- Bus A- 33MHz- 5V or Universal
Slot 10- Bus A- 33MHz- 5V or Universal
Slot 9- Bus B- 66MHz- 3.3V or Universal
Slot 8- Bus B- 66MHz- 3.3V or Universal
Slot 7- Bus C- 66MHz- 3.3V or Universal
Slot 6- Bus C- 66MHz- 3.3V or Universal
Slot 5- Bus D- 33MHz- 5V or Universal
Slot 4- Bus D- 33MHz- 5V or Universal
Slot 3- Bus D- 33MHz- 5V or Universal
Slot 2- Bus D- 33MHz- 5V or Universal
Slot 1- Bus D- 33MHz- 5V or Universal
Full Length, 64-bit, Hot-Plug PCI Slots
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
85
IBM XSERIES 370 /
NETFINITY 8500R
Host Attach
xSeries 370 / Netfinity 8500R Power, Monitor & Accessories
Part
Number
Description
Power1
Uninterruptible Power Supply (UPS)2
94G6676
APC Smart-UPS 3000RMB3
37L6861
APC Smart-UPS 5000RMB4
Monitors5
633347N
E51 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6331N2N
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6332J1N
E74 Color Monitor 17in (403mm, 15.9in Viewable Image Size), stealth black6
66274AN
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black6
9511AG1
T54A TFT LCD Color Monitor (306mm x 230mm, 15in Viewable), stealth black7
1.xSeries 370 / Netfinity 8500R systems contain three 750W (at 220V), hot-swap power supplies which handle robust configurations
while providing full redundancy. When operating at 110V, redundancy is limited to configurations not exceeding six processors, 24
memory RDIMMs, or eight PCI adapters. Each system ships with nine power cords: 3 x 220V, 3 x 110V, 3 x intra-rack 220V. Even though
multiple UPSs may provide redundant power sources, systems management software does not currently take advantage of its power
outage alerts.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimates.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. xSeries 370 / Netfinity 8500R uses an SVGA controller (S3 Trio 3D chipset) with 4MB of video memory.
6. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity Rack Keyboard
Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
Part Number
Description
Conversion Kits
28L4705
8Ux28D Rack-to-Tower Kit1
930842P
Netfinity Enterprise Rack
Rack and NetBAY2
930842X
Netfinity Enterprise Expansion Cabinet
9306900
Netfinity Rack3
9306910
Netfinity Rack (includes perforated front door)
36L9703
Netfinity Rack Extension Kit
9306200
Netfinity NetBAY224
36L9702
NetBAY22 Rack Extension Kit
36L9701
Netfinity NetBAY3E5
28L3644
Space Saver II Keyboard7, 8
01K1260
TrackPoint IV 104-Key Black Keyboard8, 9
28L3621
Preferred Keyboard (stealth black)9
28L3673
Sleek 2-Button Stealth Black Mouse
Keyboard and Mouse6
1. Includes one Netfinity NetBAY3E with casters.
2. xSeries 370 / Netfinity 8500R is housed in a 19in rack mountable drawer and requires one of the
racks listed here. See “IBM Netfinity Rack Cabinet and Options” section for IBM rack supported
devices.
3. Netfinity Rack Extension Kit (P/N 36L9703) is required for proper rear door closure clearance.
4. NetBAY22 Rack Extension Kit (P/N 36L9702) is required for proper rear door closure clearance.
5. A maximum of three NetBAY3E enclosures may be stacked beneath a supported Netfinity tower
server (Rack-to-Tower Kit28L4705 required). Optional NetBAY3Es must be shipped separately and not
while attached to the base configuration. See IBM Netfinity NetBAY3X Stackable Enclosure section for
supported devices.
6. xSeries 370 / Netfinity 8500R ships without a keyboard or mouse.
7. Installation within a rack requires optional keyboard tray (P/N 28L4707) (stows in ready-to-use
position).
8. Advanced TrackPoint IV features are not available on IBM Netfinity sy.stems.
9. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a
keyboard tray with a flat panel display.
86
.
xSeries 370 / Netfinity 8500R Tape Options
Part
Number
Tape Drives
Bays
Supported
SCSI
Interface
(bit)
00N7991
20/40GB DDS/4 4mm Internal Tape Drive
N/A
16 Ultra2 LVD
09N4040
20/40GB DLT Internal SCSI Tape Drive
N/A
8
00N7990
40/80GB DLT Internal SCSI Tape Drive
N/A
16 Ultra2 LVD
00N8017
60/120GB 8mm M2 SCSI Tape Drive
N/A
16 Ultra2 LVD
00N8016
100/200GB LTO Tape Drive
N/A
16 Ultra2 LVD
24P2396
100/200GB LTO Half-High Tape Drive
N/A
16 Ultra2 LVD
3502108
DLT Tape Autoloader
N/A
16
00N7992
120/240GB DDS/4 Tape Autoloader
N/A
16 Ultra2 LVD
-
16
Form
Factor
89mm (3.5in)
HH or
133mm
(5.25in) HH
133mm
(5.25in) FH
133mm
(5.25in) FH
133mm
(5.25in) HH
133mm
(5.25in) FH
133mm
(5.25in) HH
Termination
Included
68/50-pin
Converter
Incl
Ext Tape
Enclosures
N
N/A
N
Y
N
N/A
N
N/A
N
N/A
35510011
N
N/A
35510011
Y
N/A
-
N
N/A
35510011
35100202,
35510011
3503B0X2,
3551001
3503B0X2,
35510011
35100202,
35510011
Desktop
133mm
(5.25in) FH
IBM XSERIES 370 /
NETFINITY 8500R
Tape Autoloaders
External Tape Libraries3
3502x14
DLT Tape Library
3570C2x
Magstar MP 3570 Tape Subsystem
Y
-
-
Diff
Desktop or
Rack
6U Rack
Y
N
-
-
8, 16
16
16
16 LVD
Desktop
Desktop
Rack
-
N
N
Y
N
N
N
N
N
3551001
-
16 LVD/SE
Ext
Y
N
-
16 LVD
Int
Y
N
External Tape Enclosures
3510020
3503B0X
3551001
10L7113
External Half High SCSI Storage Enclosure4
DLT External SCSI Enclosure5
NetMEDIA Storage Expansion Unit EL6
NetMEDIA Systems Management Adapter7
-
Associated Options
00N7956
10K2340
68-pin External Multimode LVD/SE SCSI
Terminator
Media BayTray and LVD Cable Kit1
3510020,
3503B0X
3551001
Note: xSeries 370 / Netfinity 8500R does not support internal tape drives but does include an external Ultra2 0.8mm VHDCI SCSI connector for attachment of an external tape or tape
enclosure. All tape drives and enclosures are also supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which has an external 0.8mm VHDCI connector. Select tape drive, enclosure
and controller then use Appendix D: Cables - Storage Units - Controllers to select an appropriate external cable
1. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) requires replacement of the standard single-ended internal cables with one or more
(depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop mult-mode terminated cable. If the standard cables are used for
attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
2. Requires 68-pin External Multimode LVD/SE SCSI terminator (P/N 00N7956).
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. Provides a black desktop 133mm (5.25in) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination
or 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
5. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI
terminator (P/N 00N7956).
6. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, 19in rack or NetBAY3/3E mountable tape enclosure which includes two full-high (FH) or four half-high (HH) extended
length 133mm (5.25in) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies
and two power cords are also included. Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a 930842x rack.
7. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a 3551001 to provide repeater function, LVDS interface, aggregate cable lengths up to 12m when attached to an
LVD SCSI controller, and auto-termination when the 3551001 is powered off. External connector is 0.8mm VHDCI.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
87
Sample Configurations
The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements.
High Availability - Rack
Part Number
8681-8RY
Description
Netfinity 8500R 700/2MB, 512MB ECC, Open, 40X, PCI (Rack 8U)
Quantity
Usage
1
Power Redundancy standard
10K2166
Netfinity 8500R 700MHz/2MB Upgrade with Pentium III Xeon Processor
5
Total of 6 SMP processors
10K2335
Netfinity 4X Accelerator Filter
1
Required for greater than 4 processors
Required for greater than 4 processors
10K2337
Netfinity Mezzanine Expansion Kit
1
20L0247
Netfinity 256MB SDRAM ECC RDIMM II
8
Total of over 2GB of memory
28L4454
Netfinity 8500R Memory Expansion Card
1
Enables cache line interleaving
37L7201
9.1GB Ultra160 SCSI Hot-Swap SL HDD
2
NOS mirroring
37L6889
ServeRAID-4H Ultra160 SCSI Controller
1
RAID Controller - NOS plus EXP300
-
06P3601
10/100 Ethernet Server Adapter
1
6331N2N
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
1
-
28L3644
Space Saver II Keyboard
1
-
37L6861
APC Smart-UPS 5000RMB (5U)
1
-
External Storage
3551001
NetMEDIA Storage Expansion Unit EL
1
External Tape Drive Enclosure
00N7990
40/80GB DLT Internal SCSI Tape Drive
2
Installs in 3551001
10K2340
Media Bay Tray and LVD Cable Kit
1
-
03K9310
2M External Ultra2 SCSI Cable
1
3551001 to onboard SCSI
35311RU
EXP300 Storage Expansion Unit
1
Provides additional 14 bays
37L7204
9.1GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
6
RAID 5 with Hot-Spare in EXP300
9306200
Netfinity NetBAY22
1
Monitor and keyboard mount on top
36L9702
NetBAY22 Rack Extension Kit
1
Required for rear door closure
94G6667
Power Cable - Type A14 (4)
2
-
94G6670
Blank Filler Panel Kit
1
-
Rack Options
This high availability server is configured to act as the foundation for business critical applications, applications your business cannot afford to be without. The
configuration includes enough disk drives to mirror the operating system and provide a RAID 5 data environment, power supply redundancy by the server and
EXP300 and a UPS for power even during a blackout. A rack mounted tape drive is included to back up that all important asset--data. This server represents the
leading edge in high availability.
Notes/Exchange - Stack
Part Number
8681-7RY
Description
Netfinity 8500R 700/1MB, 512MB ECC, OPEN, 40X, PCI (Rack 8U)
Quantity
Usage
1
Power redundancy standard
10K2330
Netfinity 8500R 700MHz/1MB Upgrade with Pentium III Xeon Processor
5
Total of 6 SMP processors
10K2335
Netfinity 4X Accelerator Filter
1
Required for greater than 4 processors
10K2337
Netfinity Mezzanine Expansion Kit
1
Required for greater than 4 processors
20L0249
Netfinity 512MB SDRAM ECC RDIMM II
3
Total of 2GB of memory
28L4454
Netfinity 8500R Memory Expansion Card
1
Enables cache line interleaving
NOS Mirroring
37L7201
9.1GB Ultra160 SCSI Hot-Swap SL HDD
2
06P3601
10/100 Ethernet Server Adapter
2
-
37L6889
ServeRAID-4H Ultra160 SCSI Controller
1
RAID Controller-NOS plus EXP300
6331N2N
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black
1
-
28L3644
Space Saver II Keyboard
1
-
37L6861
APC Smart-UPS 5000RMB (5U)
1
-
3551001
NetMEDIA Storage Expansion Unit EL
1
External Tape Enclosure - Install in NetBAY3E
00N7990
40/80GB DLT Internal SCSI Tape Drive
2
Installs in 3551001
10K2340
Media Bay Tray and LVD Cable Kit
1
-
03K9310
2M External Ultra2 SCSI Cable
1
3551001 to Onboard SCSI
External Storage
88
35311RU
EXP300 Storage Expansion Unit
1
Provides additional 14 Bays, 1 x 2M cable
37L7205
18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
14
RAID 5 with Hot-Spare in EXP300
Stack Options
28L4705
Netfinity 8Ux28D Rack-to-Tower Kit
1
-
36L9701
Netfinity NetBAY3E
3
3 x 3U enclosure for UPS, EXP300, Tape
IBM XSERIES 370 /
NETFINITY 8500R
Refer to the IBM Datacenter Solutions section for xSeries 370 / Netfinity 8500R cluster solutions configured with Fibre Channel storage components and
connections. Datacenter solutions are also certified for Windows 2000 and NT 4.0 operating systems.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
89
IBM Netfinity 7100
)
) ax
or
)
s)
ail d/M
ss
ID
d)
an
v
x)
r
e
A
F
t
a
A
R
,
l/ S
da
oc
/M
ta e (
a,
DD
Pr
an
td
ltr
2
(ToDriv
St
(S
RD
,H
nt ps)
(
U
,
s
e
s
)
y
l
=
,
s
t
b
z
y k
r
a
it
m
al
R
lo
nt
Ba is
g e t (M (D u
MH sso
)(
ion
,S
)
ua
)
ia r d D
pt
n a r ne
ax
er
d ( oce
r
d
Q
a
e
O
ail
e
w
M
ail
e
a
(
e
l
/
M the
r
M lH
E)
pe f Pr ch
y
r pply
ol
Av
Po
td
/Av
/
r
(
c
l
o
S
D
m
l
e
be
S
t
a
E
t
I
a
l
n
a
(
e
o
(
p
u
n
c
t
t
ta
m
a
d
or er C C
y
ab r n
Fa r S
ys
Co
To
wa
ar
nd
ss
(To
Nu
or
b
ov te
OM
s ( ots
SI
t-S
du
ce um 2 EC em
rt
v S nb o
m In
rm owe
-R
y
o
e
C
o
d
a
e
o
a
l
D
r
R
P
N
S
O
L
F
P
M
H
A
R
S
B
P
C
)
ax
/M
d
St
M)
IM
Netfinity 7100 At-A-Glance
8666-31Y
700
1/4
1MB
256MB(R)/16GB
Tower
2/4
P, H, F
S-Fans
S-Power
Y 10/100 D,U2
4/2
0/364GB
40X-17X3
14/12
6/6
8666-3RY1
700
1/4
1MB
256MB(R)/16GB
Rack
(8U)
2/4
P, H, F
S-Fans
S-Power
Y 10/100 D,U2
4/2
0/364GB
40X-17X3
14/12
6/6
8666-41Y
700
1/4
2MB
256MB(R)/16GB
Tower
2/4
P, H, F
S-Fans
S-Power
Y 10/100 D,U2
4/2
0/364GB
40X-17X3
14/12
6/6
8666-4RY1
700
1/4
2MB
256MB(R)/16GB
Rack
(8U)
2/4
P, H, F
S-Fans
S-Power
Y 10/100 D,U2
4/2
0/364GB
40X-17X3
14/12
6/6
1. Housed in a 19in rack mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “Netfinity 7100 Power, Monitor & Accessories” for
supported IBM racks.
2. Intel Pentium III processor with advanced transfer (full speed) L2 cache and 100MHz access to memory and I/O buses.
3. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
Netfinity 7100 Processor Upgrades
Part
Number
Processor Upgrades with Full Speed Cache
SMP
Support1
Processor
Speed Upgrade2
10K2331
Netfinity 700MHz/1MB Upgrade II with Pentium III Xeon Processor
3xY
1 ... 2xY
10K2332
Netfinity 700MHz/2MB Upgrade II with Pentium III Xeon Processor
4xY
1 ... 3xY
19K4635
xSeries 250 900MHz/2MB Upgrade with Pentium III Xeon Processor
-
1 ... 4xY
1. Three additional processors may be installed, providing a maximum of four. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of four processors may be installed. All processors must be identical in type, speed and cache size.
Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.pc.ibm.com/support and enter machine “Type-Model” in Quick Path. Select
“Downloadable files” then “BIOS.”
90
Netfinity 7100 Memory
Set 1- J1 Std RDIMM
Set 2- J2
Set 3- J3
Set 4- J4
Set 1- J9
Set 2- J10
Set 3- J11
Set 4- J12
Std RDIMM
Set 1- J13
Set 2- J14
Set 3- J15
Set 4- J16
Set 1- J5
Set 2- J6
Set 3- J7
Set 4- J8
Std RDIMM
Std RDIMM
All RDIMMs installed in each set must be the same
size, but all the sets do not have to contain RDIMMs
of the same size. Install RDIMM sets in numerical
sequence from one to four.
64MB
(33L3067)
128MB
(33L3113)
256MB
(33L3115)
512MB
(33L3117)4
1GB
(33L3119)
256MB
4 x 64 RDIMMs
Standard
-
-
-
-
512MB
4
-
-
-
-
768MB
-
4
-
-
-
1GB
4
4
-
-
-
1.2GB
-
-
4
-
-
1.7GB
-
4
4
-
-
2GB
4
4
4
-
-
2.7GB
-
4
-
4
-
3GB
4
4
-
4
-
3.2GB
-
-
4
4
-
3.7GB
-
4
4
4
-
4GB3
-
8
4
4
-
5GB3
-
-
12
4
-
6GB3
-
-
8
8
-
7GB3
-
-
4
12
-
8GB3
-
-
-
16
-
9GB3
-
-
4
8
4
10GB3
-
-
-
12
4
12GB3
-
-
-
8
8
14GB3
-
-
-
4
12
16GB3 (max)
-
-
-
-
16
This table does not represent all possible memory configurations. Memory modules may vary in price per MB. Selection of smaller
RDIMMs may provide a more cost-effective alternative to using larger RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating system specifications for
further information.
2. To obtain the quantity of memory identified in the “Total Memory” column, select the appropriate row and order the quantity of
RDIMMs identified in all columns for that row. Example: For 1GB, order 4 x 33L3067 and 4 x 33L3113.
3. Requires removal of standard memory DIMMs.
4.The 2GB memory option (P/N 33L3147), each of which includes four 512MB RDIMMs, can be substituted for a quantity of four
512MB (P/N 33L3117) RDIMMs.
Part
Number
Memory Description1
Upgrade
10K2169
Compatible2
33L3067
Netfinity 64MB, 100MHz ECC SDRAM RDIMM
-
33L3113
Netfinity 128MB, 100MHz ECC SDRAM RDIMM
X
33L3115
Netfinity 256MB, 100MHz ECC SDRAM RDIMM
X
33L3117
Netfinity 512MB, 100MHz ECC SDRAM RDIMM
X4
33L3119
Netfinity 1GB 100MHz ECC SDRAM RDIMM
X
33L3147
2GB 100MHz ECC SDRAM RDIMM Kit (4 x 512MB)
X4
10K2169
Netfinity Active PCI/Chipkill Upgrade Kit3
-
1. Due to four-way interleaving all RDIMMs installed in each set must be the same size, but all the sets do not have to contain
RDIMMs of the same size. Memory must be installed in sets of four identical RDIMMs (example: quantity four of 33L3113). Install
RDIMM sets in numerical sequence from Set one to Set four.
2. Memory designated by an “X” may be used with Netfinity Active PCI/Chipkill Upgrade Kit (P/N 10K2169).
3. Netfinity Active PCI/Chipkill™ Upgrade Kit (P/N 10K2169) provides an upgrade to active PCI slots and “Chipkill” ECC memory.
4. Due to the new technology used by the 512MB RDIMMs contained in P/N 33L3147, they should not be mixed within a set with
Netfinity 512MB 100MHz ECC SDRAM RDIMM (P/N 33L3117.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
91
IBM NETFINITY 7100
Quantity of RDIMMs Added2
Total
Memory1
Netfinity 7100 Hard Disk Drive (HDD) Storage
Total Int
Storage1
7200RPM HDDs
9.1GB
18.2GB
10,000RPM HDDs
36.4GB
9.1GB
18.2GB
15,000RPM HDDs
36.4GB
9.1GB
18.2GB
(37L7201)2 (37L7202)2 (37L7203)2 (37L7204)2 (37L7205)2 (37L7206)2 (19K0655)2 (19K0656)2
0GB
Standard on base models
9.1GB
1
-
-
1
-
-
1
-
18.2GB
2
1
-
2
1
-
2
1
27.3GB
3
-
-
3
-
-
3
-
36.4GB
4
2
1
4
2
1
4
2
45.5GB
5
-
-
5
-
-
5
-
54.6GB
6
3
-
6
3
-
6
3
63.7GB
7
-
-
7
-
-
7
-
72.8GB
8
4
2
8
4
2
8
4
81.9GB
9
-
-
9
-
-
9
-
91GB
10
5
-
10
5
-
10
5
109.2GB
-
6
3
-
6
3
-
6
127.4GB
-
7
-
-
7
-
-
7
145.6GB
-
8
4
-
8
4
-
8
163.8GB
-
9
-
-
9
-
-
9
182GB
-
10
5
-
10
5
-
10
218.4GB
-
-
6
-
-
6
-
-
254.8GB
-
-
7
-
-
7
-
-
291.2GB
-
-
8
-
-
8
-
-
327.6GB
-
-
9
-
-
9
-
-
364GB (max)
-
-
10
-
-
10
-
-
This table does not represent all possible HDD configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal Storage
listed is within +/- 0.2GB unless otherwise noted.
2. Netfinity 7100 contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus speeds.
92
Form
Factor
Height
Front
Access
Usage
Part
Number
Description
RPM
Height
Bays
Supported
Max
Qty
Ultra160 Hard Disk Drives (HDD)1
-
89mm
(3.5in)
SL
Yes
Diskette
-
133mm
(5.25in)
HH
Yes
IDE CDROM
37L7201
9.1GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
See diagram
10
RM 1
133mm
(5.25in)
HH1
Yes
Open
37L7202
18.2GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
See diagram
10
RM 2
133mm
(5.25in)
HH1
Yes
Open
37L7203
36.4GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
See diagram
10
1 ... 10
or
1 ... 7
HS
SL or HH2
Yes
Open
37L7204
9.1GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
See diagram
10
NB33
19in Rack
3U
Yes
Open
37L7205
18.2GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
See diagram
10
37L7206
36.4GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
See diagram
10
19K0655
9.1GB 15Krpm Ultra160 SCSI HotSwap HDD
15,000
SL
See diagram
10
19K0656
18.2GB 15Krpm Ultra160 SCSI
Hot-Swap HDD
15,000
SL
See diagram
10
1. Two half-high (HH) bays can be combined to support a single fullhigh (FH) device.
2. The top bay is HH; all others are configured in groups of three SL
bays. When a HH drive is installed in one of these groups, only another
HH or a single SL drive can be installed in the same group. For clarity,
the SCSI IDs are identified.
3. Tower configured systems support installation of up to three
NetBAY3s. See IBM Netfinity NetBAY3 Stackable Enclosure section for
supported devices.
External Storage
Expansion Units2
Form Factor
35311RU
EXP300 Storage Expansion Unit3
Rack (3U)
09N7296
EXP300 Rack-to-Tower
Conversion Kit
35601RU
FAStT EXP500 Storage Expansion
Unit4
35421RU
SL
0
HH
0
1
2
3
4
4
5
Diskette
9
CD-ROM
Bay 1
10
10
Hot-Swap (HS)
Bays 10 x SL
-or7 x HH
(SCSI IDs
shown)
11
13
Bay 2
8
14
5, 6
35422RU FAStT200 HA Storage Server5
19K1121
Removable
Media (RM)
Bays
FAStT200 Storage Server
-
12
14
Netfinity NetBAY3 (NB3)
(Optional on Tower Configurations)
FAStT200 Redundant RAID
Controller
Rack (3U)
Rack (3U)
Rack (3U)
-
1. Netfinity 7100 contains an Ultra2 hot-swap backplane which limits Ultra160
HDDs to Ultra2 bus speeds.
2. Not supported by the onboard external SCSI port. To configure a SCSI
storage device, select an optional SCSI controller then refer to Appendix D:
Cables - Storage Units - Controllers to confirm the controller supports the
desired External Storage Expansion Unit and to select a supported cable. For
HDD or other expansion unit options, see the specific expansion unit section.
For Fibre Channel storage devices, refer to the Fibre Array Solutions section.
3. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W
power supplies, each with its own power cord. To convert an EXP300 to a tower
form factor, Netfinity EXP300 Rack-to-Tower Conversion Kit (P/N 09N7296) is
required.
4. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hotswap 350W power supplies, each with its own power cord.
5. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power
supplies, each with its own power cord.
6. Can be upgraded to FAStT200 HA Storage Server through the addition of a
FAStT200 Redundant RAID Controller (P/N 19K1121).
IBM NETFINITY 7100
Bay
1. The top bay is HH; all others are configured in groups of three SL
bays. When a HH drive is installed in one of these groups, only another
HH or a single SL drive can be installed in the same group. For clarity,
the SCSI IDs are identified.
Netfinity 7100 Internal SCSI Cabling
The Netfinity 7100 contains a DASD backplane supporting 10 hot-swap, SCA-2 compliant drive bays. The backplane is connected to Channel B of the integrated
dual-channel, Wide Ultra2 SCSI controller through a 16-bit LVD SCSI cable. Channel A only supports external SCSI attachment and is cabled directly to the external
0.8mm VHDCI SCSI connector. To support devices in the internal 133/89mm (5.25/3.5in) half-high bays, a two-drop, 16-bit LVD SCSI cable with integrated terminator
is included with the server. This cable can be used to connect to an optional SCSI adapter or, in the case of RAID configurations where the backplane cable is
attached to an optional RAID adapter, it can be connected to the Channel B connector.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
93
Netfinity 7100 I/O Options
Part
Number
Description
Adapter
Length
PCI
Support
Slots
HotPCI
Supported1 Plug2 Voltage
Key
MHz
Storage Controllers3
37L6091
ServeRAID-4L Ultra160 SCSI Controller4
Full
32/64-bit
1 ... 67
X
Universal
37L6080
ServeRAID-4M Ultra160 SCSI
Controller5
Full
32/64-bit
1 ... 67
X
Universal
33
37L6889
ServeRAID-4H Ultra160 SCSI Controller6
Full
32/64-bit
1 ... 67
X
Universal
33
19K4646
PCI Wide Ultra160 SCSI Adapter8
Half
32/64-bit
1 ... 6
-
Universal
66
02K3454
PCI Fast/Wide Ultra SCSI Adapter
Half
32-bit
3 ... 6
-
5
33
Half
32/64-bit
1 ... 6
X2
Universal
66
33
Fiber Storage Controllers and Options9
00N6881
Netfinity FAStT Host Adapter
35521RU
FAStT500 Storage Server
-
-
-
-
-
-
35421RU
FAStT200 Storage Server
-
-
-
-
-
-
35422RU
FAStT200 HA Storage Server
-
-
-
-
-
-
35341RU
SAN Fibre Channel Managed Hub
-
-
-
-
-
-
2109S08
SAN Fibre Channel Switch, 8-Port
-
-
-
-
-
-
2109S16
SAN Fibre Channel Switch, 16-Port
-
-
-
-
-
-
2108R3L
SAN Data Gateway Router Ultra SCSI LVD Port10
-
-
-
-
-
-
33
Networking11
Ethernet
34L4601
Netfinity 10/100 Ethernet Security Adapter
Half
32/64-bit
1 ... 67
X2
Universal
19K4401
Netfinity Gigabit Ethernet Adapter (copper)
Half
32/64-bit
1 ... 67
X2
Universal
33
09N9901
Netfinity 10/100 EtherLink Server Adapter by 3Com
Half
32-bit
1 ... 67
X2
Universal
33
06P3601
10/100 Ethernet Server Adapter
Half
32-bit
1 ... 67
X2
Universal
33
06P3701
Gigabit Ethernet SX Server Adapter (fiber)
Half
32/64-bit
1 ... 6
X2
Universal
66
33
Token Ring
34L0701
Token-Ring 16/4 PCI Adapter 2 with Wake on LAN12
Half
32-bit
1 ... 67
X2
Universal
34L5001
16/4 Token-Ring PCI Management Adapter12
Half
32-bit
1 ... 67
X2
Universal
33
34L5201
High-Speed 100/16/4 Token-Ring PCI Management Adapter12
Half
32-bit
1 ... 67
X2
Universal
33
Communications13
33L4618
PCI V.90 56 Data/Fax Modem14
Half
32-bit
3 ... 6
-
5
33
37L14xx
Serial I/O SST 8, 16, and 128 port adapters15
Half
32-bit
3 ... 6
-
5
33
Full
32-bit
3 ... 618
-
5
33
-
-
-
-
-
-
-
-
-
-
-
-
Full
32-bit
3 ... 622
-
5
33
-
-
3 ... 6
X
-
-
Systems Management16
01K7209
Netfinity Advanced System Management PCI Adapter17
19
03K9309
Netfinity Advanced System Management Interconnect Cable Kit
36L9654
Netfinity Advanced System Management Token-RIng Connection20
Host Attach
9086001
Netfinity ESCON Adapter21
Other
10K2169
Netfinity Active PCI/Chipkill Upgrade Kit2
1.The 5V slots support Universal or 5V adapters. The 3.3V slots support 3.3V adapters. A Universal Keyed 66MHz adapter plugged into a 33MHz slot will operate at 33MHz. A Universal Keyed
33MHz adapter plugged into a 66MHz slot limits other adapters installed on the same bus to 33MHz.
2. Netfinity 7100 does not ship with hot-plug PCI slots. The addition of optional Netfinity Active PCI/Chipkill Upgrade Kit (P/N 10K2169) provides slots three through six with hot-plug capability
using IBM’s Active PCI technology. For Network Operating System support, access www.pc.ibm.com/us/compat.
3. Netfinity 7100 includes a dual-port, dual-channel, 64-bit Wide Ultra2 SCSI controller with one internal connector and one external port with a 0.8mm Very High Density Connection Interface
(VHDCI).
4. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides a single channel, 16MB of ECC cache and either one internal or one external Ultra160
connection. External connectors are 0.8mm VHDCI.
5. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides two channels, 64MB of battery-backed ECC cache and two internal and two external
Ultra160 connectors (only two connectors may be utilized). External connectors are 0.8mm VHDCI.
6. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266MHz PowerPC 750 processor and provides 128MB of battery-backed ECC cache with two internal and up to four external
Ultra160 connectors (only four connectors may be utilized). External connectors are 0.8mm VHDCI.
7. Installation of a 33MHz adapter into a Bus A 66MHz slot will slow operation of all Bus A slots to 33MHz.
8. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector with
a 0.8mm VHDCI connector. Only one of the two connectors may be utilized.
9. See Netfinity Fibre Array Solutions section for additional configuration information.
10. The 2108R3L SAN Data Gateway Router Ultra SCSI LVD port replaces both the Single-ended and Differential SAN Data Gateway Routers (P/N 2108R3D and 2108R3S).
11. Netfinity 7100 includes a full-duplex, 10/100Mbps Ethernet PCI Controller.
12. The Wake on LAN function of this option is not supported by this server.
13. Netfinity 7100 includes two USB ports, two high-speed serial/asynchronous ports, (NS16550A compatible), and one high-speed (up to 2MB/sec data transfer speed) bidirectional parallel
port supporting devices using ECP/EPP/SSP protocols adhering to the IEEE 1284 standard.
14. Due to homologation variances, modem availability may differ by country.
15. See Appendix E for details on Serial I/O Options and configuration limitations.
16. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into Netfinity 7100 works with Netfinity Director to provide significant system management function.
94
When used with optional Netfinity Advanced System Management PCI Adapter (P/N 01K7209) and Netfinity Advanced System Management Interconnect Cable Kit (P/N 03K9309) additional
management and control of up to 12 service processors from a remote console through a single modem or LAN connection is possible.
17. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56W AC adapter which requires a separate power source. Provides an integrated 10/
100 Ethernet port and PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection (P/N 36L9654).
18. A maximum quantity of one is supported.
19. Required for all xSeries and Netfinity servers containing a standard Advanced System Management Processor that are to be interconnected for system management support through a LAN
or modem connection (Netfinity 5500 models 8660-1 ... 4xU are not supported). Up to 12 service processors may be interconnected (including standard and optional processors) with an
aggregate connection length of no more than 91.4m (300ft). A customer-supplied Ethernet cable is required for each interconnection.
20. Contains an IBM Turbo 16/4 Token-Ring PCI Card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter), and a PC Card to 9-pin D-Shell cable
which is routed to a rear chassis cut-out. The Netfinity Advanced System Management PCI Adapter’s integrated Ethernet port and Netfinity Advanced System Management Token-Ring
Connection cannot be connected or used together. To download the latest firmware, access www.pc.ibm.com/us/netfinity. Select “Server Support,” “Family,” “Model,” “Downloadable files,” and
finally “Advanced Systems Management.”
21. Provides an ESCON MIC and a DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.
22. A maximum of two 9086001 adapters (installed in nonadjacent slots) are supported in a single server.
Slot 1- Bus A- 66MHz- 3.3V or Universal
Slot 2- Bus A- 66MHz- 3.3V or Universal
Slot 3- Bus B- 33MHz- 5V or Universal
Slot 4- Bus B- 33MHz- 5V or Universal
Slot 5- Bus B- 33MHz- 5V or Universal
Slot 6- Bus B- 33MHz- 5V or Universal
All Slots- Full Length, 64-bit
Netfinity 7100 Power, Monitor & Accessories
Part Number
Description
Power1
33L3760
250W Hot-Swap Redundant Power Supply
Uninterruptible Power Supply (UPS)2
94G3135
APC Smart-UPS 1000
94G3136
APC Smart-UPS 1400
94G6674
APC Smart-UPS 1400RMB3
94G6676
APC Smart-UPS 3000RMB3
37L6861
APC Smart-UPS 5000RMB4
633347N
E51 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6331N2N
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6332J1N
E74 Color Monitor 17in (403mm, 15.9in Viewable Image Size), stealth black6
66274AN
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black6
9511AG1
T54A TFT LCD Color Monitor (306mm x 230mm, 15in Viewable), stealth black7
IBM NETFINITY 7100
Monitors5
1. Netfinity 7100 includes two 250W hot-swap redundant power supplies with the ability to accept up to two additional 250W
Hot-Swap Redundant Power Supplies (P/N 33L3760). Each power supply includes its own 9ft power cord for attachment to a
low voltage UPS, PDU or wall outlet. To assist in determining when an additional power supply is required to preserve
redundancy, a “Non-Redundant LED” is a standard feature of the Netfinity 7100. Predicting whether a particular configuration
will require an additional power supply for redundancy is very complex. However, once the system is installed, the “NonRedundant LED” will indicate when an additional power supply is required. The following sample configuration is provided as a
reference.
Number of
Power Supplies
System Configuration Supported
Typical Non-Redundant Configuration
2 x Processors
2
3 x PCI Adapters
4 x Half-High or 5 Slim-Line HDDs
8 x 512MB RDIMMs
Typical Redundant Configuration
4 x Processors
38
6 x PCI Adapters
7 x Half-High or 10 Slim-Line HDDs
16 x 512MB RDIMMs
4
Updated 03/22/01
Full Configuration with Redundancy
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
95
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. Netfinity 7100 uses an SVGA controller (S3 Trio 3D chipset) with 4MB of video memory.
6. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity Rack
Keyboard Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
8. The addition of a DLT tape drive may require a fourth power supply to preserve redundancy.
Part Number
Description
Conversion Kits
37L6860
8Ux24D Rack-to-Tower Kit1
37L6859
8Ux24D Tower-to-Rack Kit
Rack and NetBAY2
930842P
Netfinity Enterprise Rack
930842X
Netfinity Enterprise Expansion Cabinet
9306900
Netfinity Rack
9306910
Netfinity Rack (includes perforated front door)
9306200
Netfinity NetBAY22
10L6912
Netfinity NetBAY33
10L6913
Netfinity Caster Set
Keyboard and Mouse4
28L3644
Space Saver II Keyboard5, 7
01K1260
TrackPoint IV 104-Key Black Keyboard6,7
28L3621
Preferred Keyboard (stealth black)6
28L3673
Sleek 2-Button Stealth Black Mouse
1. Includes one Netfinity NetBAY3 with casters.
2. Netfinity 7100 rack models are housed in a 19in rack mountable drawer and require one of the racks listed here.
Tower models require 8Ux24D Tower-to-Rack Kit (P/N 37L6859) for installation in a rack.
3. Netfinity 7100 tower models require 8Ux24D Rack-to-Tower Kit (P/N 37L6860) for use with a NetBAY3. A maximum
of three NetBAY3 enclosures, including the one which ships with the conversion kit, may be stacked beneath a
supported Netfinity tower server. Optional NetBAY3s must be shipped separately and not while attached to the base
configuration. See IBM Netfinity NetBAY3 Stackable Enclosure section for supported devices.
4. Tower models includes both a mouse and keyboard. Rack models include neither.
5. Installation within a rack requires optional keyboard tray (P/N 28L4707) (stows in ready-to-use position).
6. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray
with a flat panel display.
7. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
Netfinity 7100 Tape Options
Part
Number
Tape Drives
Bays
Supported
SCSI
Interface
(bit)
00N7991
20/40GB DDS/4 4mm Internal Tape Drive1
1, 2
16 Ultra2 LVD
00N7990
40/80GB DLT Internal SCSI Tape Drive1
1+2
16 Ultra2 LVD
00N8017
60/120GB 8mm M2 SCSI Tape Drive1
1, 2
16 Ultra2 LVD
1+2
16 Ultra2 LVD
1
00N8016
100/200GB LTO Tape Drive
24P2396
100/200GB LTO Half-High Tape Drive1
1, 2
16 Ultra2 LVD
09N4040
20/40GB DLT Internal SCSI Tape Drive1
1+2
8
3502108
DLT Tape Autoloader
N/A
16
Form
Factor
89mm (3.5in)
HH or
133mm
(5.25in) HH
133mm
(5.25in) FH
133mm
(5.25in) HH
133mm
(5.25in) FH
133mm
(5.25in) HH
133mm
(5.25in) FH
Termination 68/50-pin
Included
Converter
Incl
Ext Tape
Enclosures
35100202,
35510013
N
N/A
N
N/A
N
N/A
N
N/A
35510013
N
N/A
35510013
N
Y
3503B0X2
35510013
Y
N/A
-
3503B0X2,
35510013
35100202,
35510013
Tape Autoloaders
96
Desktop
00N7992
120/240GB DDS/4 Tape Autoloader1
1+2
16 Ultra2 LVD
133mm
(5.25in) FH
N
N/A
35510013
External Tape Libraries4
Y
-
-
Diff
Desktop or
Rack
6U Rack
Y
N/A
-
-
8, 16
16
16
16 LVD
Desktop
Desktop
Rack
-
N
N
Y
N
N
N
N
N
3551001
-
16 LVD/SE
Ext.
Y
N
-
16 LVD
Int.
Y
N
3502x14
DLT Tape Library
-
16
3570C2X
Magstar MP 3570 Tape Subsystem
-
External Tape Enclosures
3510020
3503B0X
3551001
10L7113
External Half High SCSI Storage Enclosure5
DLT External SCSI Enclosure6
NetMEDIA Storage Expansion Unit EL7
NetMEDIA Systems Management Adapter8
Associated Options
00N7956
10K2340
68-pin External Multimode LVD/SE SCSI
Terminator
Media BayTray and LVD Cable Kit3
3510020,
3503B0X
3551001
Note: Netfinity 7100 includes an external 0.8mm VHDCI connector.
1. Non-RAID Configurations require PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which contains a five-drop multi-mode terminated LVD SCSI cable. RAID configurations where the hotswap backplane is cabled to a RAID controller utilize the included two-drop multi-mode terminated LVD SCSI cable ito attach internal tapes to the onboard controller.
2. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
3. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) requires replacement of the standard single-ended internal cables with one or more
(depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop mult-mode terminated cable. If the standard cables are used
for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
4. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
5. Provides a black desktop 133mm (5.25in) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self- termination
or 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
6. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI
terminator (P/N 00N7956).
7. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, 19in rack or NetBAY3/3E mountable tape enclosure which includes two full-high (FH) or four half-high (HH) extended
length 133mm (5.25in) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies
and two power cords are also included. Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a 930842x rack.
8. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a 3551001 to provide repeater function, LVDS interface, aggregate cable lengths up to 12m when attached to
an LVD SCSI controller, and auto-termination when the 3551001 is powered off. External connector is 0.8mm VHDCI.
IBM NETFINITY 7100
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
Netfinity 7100 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or
IBM Marketing Representative for assistance with your specific configuration requirements.
High Availability Application Server
Part Number
Quantity
Usage
8666-41Y
33L3067
33L3113
33L3115
10K2332
37L7201
37L7202
00N7990
Netfinity 7100 700/2MB Xeon, 256MB(R) ECC, Open, 40X, PCI
Netfinity 64MB, 100MHz ECC SDRAM RDIMM
Netfinity 128MB, 100MHz ECC SDRAM RDIMM
Netfinity 256MB, 100MHz ECC SDRAM RDIMM
Netfinity 700MHz/2MB Upgrade II with Pentium III Xeon Processor
9.1GB Ultra160 SCSI Hot-Swap SL HDD
18.2GB Ultra160 SCSI Hot-Swap SL HDD
40/80GB DLT Internal SCSI Tape Drive
1
4
4
4
2
2
61
1
37L6080
ServeRAID-4M Ultra160 SCSI Controller
1
2GB Total System Memory
Total of 3 SMP processors
9.1GB mirrored for NOS
72GB RAID 5 with Hot-Spare
RAID 1 for NOS, RAID 5 for
data
Updated 03/22/01
Description
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
97
33L3760
66274AN
94G3136
250W Hot-Swap Redundant Power Supply
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black
APC Smart-UPS 1400
1
1
1
Full power redundancy
UPS
1. Six HDDs are used for RAID 5 protection. One HDD is identified as a hot-spare. Effective capacity is four HDDs or 72.8GB
This tower server is configured to act as the foundation for business critical applications, applications your business cannot afford to be without. Configured with
enough hard disk drives to mirror the operating system and provide a standard RAID 5 environment for data, optional hot-swap redundant power and UPS for power
even during a blackout, this server represents the leading edge in high availability. An internal tape drive is included to back up that all important asset--data. A
modem could be included to allow out-of-band (non-LAN) system management utilizing the integrated Netfinity Advanced System Management Processor.
Server Consolidation
Part Number
8666-31Y
33L3113
10K2331
37L7204
37L7205
37L6080
06P3601
00N7990
33L3760
66274AN
94G3136
Description
Netfinity 7100 700MHz/1MB Xeon, 256MB(R) ECC, Open, 40X, PCI
Netfinity 128MB, 100MHz ECC SDRAM RDIMM
Netfinity 700MHz/1MB Upgrade II with Pentium III Xeon Processor
9.1GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
ServeRAID-4M Ultra160 SCSI Controller
10/100 Ethernet Server Adapter
40/80GB DLT Internal SCSI Tape Drive
250W Hot-Swap Redundant Power Supply
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black
APC Smart-UPS 1400
Quantity
Usage
1
4
1
2
81
1
2
1
1
1
1
768MB Total System Memory
Total of 2 SMP processors
9.1GB mirrored for NOS
109GB RAID 5 with Hot-Spare
RAID 1 for NOS, RAID 5 for data
Total of 3 Ethernet connections
Full Power Redundancy
UPS
1. Eight HDDs are used for RAID 5 protection. One HDD is identified as a hot-spare. Effective capacity is six HDDs or 109.2GB
This tower model is configured to meet the need of server consolidation. Many businesses are trying to get their arms around the dispersed departmental servers
that have grown up around the enterprise. By moving multiple servers onto one platform there is only one system to manage both hardware and software. There is
potentially less expense for service, software licenses, etc., and there is less concern about single points of failure because the Netfinity 7100 is designed for high
availability. This configuration includes 109GB of internal HDD storage, features a third power supply which provides fully redundant power, a UPS to help protect the
system against a momentary electricity loss, and an internal tape drive that backs up as much as 80GB per tape--in addition to all the standard features of the
Netfinity 7100.
98
IBM NETFINITY 7100
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
99
IBM Netfinity 7600
x)
or
)
s)
il) a
ss
ID
d)
an
vatd/M
x)
r
e
A
F
a
A
a
c
/
,
d
o
,R
/M
al (S
DD
Pr
an
td
ot ive
tra
2
(TD
r
(S
, H l, St
nt ps)
Ul
RD
s
e
s
) rs (
y
,
t
b
t
z
l
y
=
m
a
a isk
ti
lo
na
R
g e t (M (D u
MH sso
io
an
,S
)(
aBD
)
pt
n a r ne
er
d ( oce
il)
r
d i ar d
Qu
ax
a
e
O
e
w
e
(
ail
e
l
)
e
y
e
r
va
M
M th
l
o
r
l
/
Ml H
ro
(P
cy
/Av al/A
or u p p
Sp of P ach
td
DE
m
e
be
l
t
t
E
I
a
l
n
e
S
r
(
p
a
n
c
(
m
a
t
o
ot
st ard
ab rn
so ber CC C
Fa er S
wa und
ry
Nu
(To s (T
ov nte
Sy
IC
OM
o
es
-S
m
rt
mo
-R
ys
ot
ed
CS
oc Num L2 E
dv Onb
em I
ot
or Pow
e
D
l
r
a
R
Pa
F
S
H
A
R
S
P
C
M
B
)
ax
d/M
t
S
3
M)
IM
8665-4RY1
700
1/4
1MB
512MB(R) / 16GB
Rack
(8U)
3/4
P, S,
H, F
S-Fans
S-Power4
Y 10/100
D,U2, R6
4/2
0 / 364GB
40X-175
14/12
6/5
8665-5RY1
700
1/4
2MB
512MB(R) / 16GB
Rack
(8U)
3/4
P, S,
H, F
S-Fans
S-Power4
Y 10/100
D,U2, R6
4/2
0 / 364GB
40X-175
14/12
6/5
1. Housed in a 19in rack-mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “Netfinity 7600 Power, Monitor & Accessories” for supported
IBM racks.
2. Intel Pentium III Xeon processor with advanced transfer (full speed) L2 cache and 100MHz access to memory and I/O buses.
3. Advanced Chipkill ECC memory corrects two-, three-, and four-bit memory errors.
4. Robust configurations may require optional 250W Hot-Swap Redundant Power Supply (P/N 33L3760) for redundancy. See “Power” under Netfinity 7600 Power, Monitor & Accessories”
for additional information.
5. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
6. RAID adapter is equivalent to ServeRAID-4M Ultra160 SCSI Controller (P/N 37L6080).
Netfinity 7600 Processor Upgrades
Part
Number
Processor Upgrades with Full Speed Cache
SMP
Support1
Processor
Speed Upgrade2
10K2331
Netfinity 700MHz/1MB Upgrade II with Pentium III Xeon Processor
4RY
1RY, 2RY
10K2332
Netfinity 700MHz/2MB Upgrade II with Pentium III Xeon Processor
3RY, 5RY
1RY, 2RY, 4RY
19K4635
xSeries 250 900MHz/2MB Upgrade with Pentium III Xeon Processor
-
1 ,,, 5RY
1. Three additional processors may be installed, providing a maximum of four. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of four processors may be installed. All processors must be identical in type, speed and cache size.
Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.pc.ibm.com/support and enter machine “Type-Model” in Quick Path. Select
“Downloadable files” then “BIOS.”
100
Netfinity 7600 Memory
Quantity of RDIMMs Added2
Total
Memory1
Set 1-J1
Set 2-J2
Set 3-J3
Set 4-J4
Std RDIMM
Set 1-J5
Set 2-J6
Set 3-J7
Set 4-J8
Std RDIMM
Set 1-J9
Set 2-J10
Set 3-J11
Set 4-J12
Std RDIMM
Set 1-J13
Set 2-J14
Set 3-J15
Set 4-J16
Std RDIMM
128MB
(33L3113)
256MB
(33L3115)
512MB
(33L3117)4
1GB
(33L3119)
512MB
4 x 128
RDIMMs
standard
-
-
-
1GB
4
-
-
-
1.5GB
-
4
-
-
2GB
4
4
-
-
2.5GB
-
8
-
-
3GB
4
-
4
-
4GB
4
4
4
-
5GB
4
-
8
-
size, but all the sets do not have to contain RDIMMs
6GB3
-
8
8
-
of the same size. Install RDIMM sets in numerical
7GB3
-
4
12
-
sequence from one to four.
8GB3
-
-
16
-
All RDIMMs installed in each set must be the same
9GB
4
-
-
8
10GB3
-
-
12
4
12GB3
-
-
8
8
14GB3
-
-
4
12
16GB3 (max)
-
-
-
16
This table does not represent all possible memory configurations. Memory modules may vary in price per
MB. Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating
system specifications for further information.
2. To obtain the Quantity of memory identified in the “Total Memory” column, select the appropriate row
and order the quantity of RDIMMs identified in all columns for that row. Example: For 2GB, order 4 x
33L3113 plus 4 x 33l3115.
3. Requires removal of standard RDIMMs.
4. The 2GB memory option (P/N 33L3147), each of which includes four 512MB RDIMMs, can be
substituted for a quantity of four 512MB (P/N 33L3117) RDIMMs.
Part
Number
33L3113
Memory Description1
Netfinity 128MB, 100MHz ECC SDRAM RDIMM
33L3115
Netfinity 256MB, 100MHz ECC SDRAM RDIMM
33L3117
Netfinity 512MB, 100MHz ECC SDRAM RDIMM2
33L3119
Netfinity 1GB 100MHz ECC SDRAM RDIMM
33L3147
2GB 100MHz ECC SDRAM RDIMM Kit (4 x 512MB)2
IBM NETFINITY 7600
1. Due to four-way interleaving all RDIMMs installed in each set must be the same size, but all the sets do
not have to contain RDIMMs of the same size. Memory must be installed in sets of four identical RDIMMs
(example: quantity four of 33L3113). Install RDIMM sets in numerical sequence from Set 1 to Set 4. Chipkill
support is provided on the memory card.
2. Due to the new technology used by the 512MB RDIMMs contained in P/N 33L3147, they should not be
mixed within a set with Netfinity 512MB 100MHz ECC SDRAM RDIMM (P/N 33L3117).
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
101
Netfinity 7600 Hard Disk Drive (HDD) Storage
Total Int
Storage1
7200RPM HDDs
9.1GB
18.2GB
10,000RPM HDDs
36.4GB
9.1GB
18.2GB
15,000RPM HDDs
36.4GB
9.1GB
18.2GB
(37L7201)2 (37L7202)2 (37L7203)2 (37L7204)2 (37L7205)2 (37L7206)2 (19K0655)2 (19K0656)2
0GB
Standard on base models
9.1GB
1
-
-
1
-
-
1
-
18.2GB
2
1
-
2
1
-
2
1
27.3GB
3
-
-
3
-
-
3
-
36.4GB
4
2
1
4
2
1
4
2
45.5GB
5
-
-
5
-
-
5
-
54.6GB
6
3
-
6
3
-
6
3
63.7GB
7
-
-
7
-
-
7
-
72.8GB
8
4
2
8
4
2
8
4
81.9GB
9
-
-
9
-
-
9
-
91GB
10
5
-
10
5
-
10
5
109.2GB
-
6
3
-
6
3
-
6
127.4GB
-
7
-
-
7
-
-
7
145.6GB
-
8
4
-
8
4
-
8
163.8GB
-
9
-
-
9
-
-
9
182GB
-
10
5
-
10
5
-
10
218.4GB
-
-
6
-
-
6
-
-
254.8GB
-
-
7
-
-
7
-
-
291.2GB
-
-
8
-
-
8
-
-
327.6GB
-
-
9
-
-
9
-
-
364GB (max)
-
-
10
-
-
10
-
-
This table does not represent all possible HDD configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal Storage
listed is within +/- 0.2GB unless otherwise noted.
2. Netfinity 7600 contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 speeds.
102
Bay
Form
Factor
Height
Front
Access
Usage
Part
Number
Description
RPM
Height
Bays
Supported
Max
Qty
Ultra160 HDDs1
-
89mm
(3.5in)
SL
Yes
Diskette
-
133mm
(5.25in)
HH
Yes
IDE CDROM
37L7201
9.1GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
See diagram
10
RM 1
133mm
(5.25in)
HH1
Yes
Open
37L7202
18.2GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
See diagram
10
RM 2
133mm
(5.25in)
HH1
Yes
Open
37L7203
36.4GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
See diagram
10
1 ... 10
HS
SL
Yes
Open
37L7204
9.1GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
See diagram
10
NB32
19in Rack
3U
Yes
Open
37L7205
18.2GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
See diagram
10
37L7206
36.4GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
See diagram
10
19K0655
9.1GB 15Krpm Ultra160 SCSI HotSwap HDD
15,000
SL
See diagram
10
19K0656
18.2GB 15Krpm Ultra160 SCSI
Hot-Swap HDD
15,000
SL
See diagram
10
1. Two half-high (HH) bays can be combined to support a single fullhigh (FH) device
2. Tower configured systems support installation of up to three
NetBAY3s. See IBM Netfinity NetBAY3 Stackable Enclosure section for
supported devices.
SL
0
Removable
Media (RM)
Bays
Form Factor
35311RU
EXP300 Storage Expansion Unit4
Rack (3U)
09N7296
EXP300 Rack-to-Tower
Conversion Kit
35601RU
FAStT EXP500 Storage Expansion
Unit5
1
3
4
5
Diskette
External Storage
Expansion Units2, 3
11
Hot-Swap (HS)
Bays 10 x SL
(SCSI IDs
shown)
35421RU
FAStT200 Storage Server
-
6, 7
35422RU FAStT200 HA Storage Server6
19K1121
FAStT200 Redundant RAID
Controller
Rack (3U)
Rack (3U)
Rack (3U)
-
1. Netfinity 7600 contains an Ultra2 hot-swap, split backplane which supports Ultra160 HDDs at Ultra2 bus
speeds when connected to the standard integrated storage controller. Ultra160 bus speeds are supported with
the addition of an optional Ultra160 storage controller.
13
2. Not supported by the onboard external SCSI connector. Includes a single ServeRAID-4M, one channel of
Bay 1
which is attached to the internal hot-swap backplane. Remaining channels are available for external usage
14
according to option specifications.
Bay 2
3. To configure a SCSI storage device, select an optional SCSI controller then refer to Appendix D: Cables 15
Storage Units - Controllers to confirm the controller supports the desired External Storage Expansion Unit and to
select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section. For
Netfinity NetBAY3 (NB3)
Fibre Channel storage devices, refer to the Fibre Array Solutions section.
(Optional on Tower Configurations)
4. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W power supplies, each with its own
power cord. To convert an EXP300 to a tower form factor, Netfinity EXP300 Rack-to-Tower Conversion Kit (P/N
All bays are SL. Bus A includes the top five bays supported by the
09N7296) is required.
standard integrated Ultra2 SCSI controller connected by a standard 16- 5. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each
bit LVDS cable. Bus B includes the lower five bays. For clarity, the SCSI with its own power cord.
IDs are identified.
6.The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power
cord.
7. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID
Controller (P/N 19K1121).
CD-ROM
12
Netfinity 7600 Internal SCSI Cabling
IBM NETFINITY 7600
The Netfinity 7600 contains a DASD backplane supporting 10 hot-swap, SCA-2 compliant drive bays. The backplane is connected to the internal connector of a
standard ServeRAID adapter through a 16-bit LVD SCSI cable. Models 8665-1 ... 3RY contain a ServeRAID-3HB. All other models contain a ServeRAID-4M. External
RAID support is provided through the two external 0.8mm VHDCI connectors on the back of the adapter. Models using ServeRAID-4M for internal RAID may only
utilize one of the external ports. To support SCSI devices in the internal 133/89mm (5.25/3.5in) half-high bays, a two-drop, 16-bit LVD SCSI cable with integrated
terminator is included with the server. This cable can be used to connect Channel B of the integrated Wide Ultra2 SCSI controller to SCSI devices in one or both of
the removable media bays. Channel A of the dual-channel, Wide Ultra2 SCSI controller only supports external SCSI attachment and is cabled directly to an external
0.8mm VHDCI SCSI connector.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
103
Netfinity 7600 I/O Options
Part
Number
Description
Adapter
Length
PCI
Support
Slots
HotPCI
MHz
Supported1 Plug2 Voltage
Key
Storage Controllers3
37L6080
ServeRAID-4M Ultra160 SCSI Controller4
Full
32/64-bit
1 ... 67
X
Universal
37L6091
ServeRAID-4L Ultra160 SCSI
Controller5
Full
32/64-bit
1 ... 67
X
Universal
33
37L6889
ServeRAID-4H Ultra160 SCSI Controller6
Full
32/64-bit
1 ... 67
X
Universal
33
19K4646
PCI Wide Ultra160 SCSI Adapter8
Half
32/64-bit
1 ... 6
-
Universal
66
02K3454
PCI Fast/Wide Ultra SCSI Adapter
Half
32-bit
3 ... 6
-
5
33
33
Fiber Storage Controllers and Options9
00N6881
Netfinity FAStT Host Adapter
Half
32/64-bit
1 ... 6
X
Universal
66
35521RU
FAStT500 Storage Server
-
-
-
-
-
-
35421RU
FAStT200 Storage Server
-
-
-
-
-
-
35422RU
FAStT200 HA Storage Server
-
-
-
-
-
-
35341RU
SAN Fibre Channel Managed Hub
-
-
-
-
-
-
2109S08
SAN Fibre Channel Switch, 8-port
-
-
-
-
-
-
2109S16
SAN Fibre Channel Switch, 16-port
-
-
-
-
-
-
2108R3L
SAN Data Gateway Router Ultra SCSI LVD Port10
-
-
-
-
-
-
33
Networking11
Ethernet
09N9901
10/100 EtherLink Server Adapter by 3Com
Half
32-bit
1 ... 67
X
Universal
34L4601
Netfinity 10/100 Ethernet Security Adapter
Half
32/64-bit
1 ... 67
X
Universal
33
19K4401
Netfinity Gigabit Ethernet Adapter (copper)
Half
32/64-bit
1 ... 67
X
Universal
33
06P3601
10/100 Ethernet Server Adapter
Half
32-bit
1 ... 67
X
Universal
33
06P3701
Gigabit Ethernet SX Server Adapter (fiber)
Half
32/64-bit
1 ... 6
X
Universal
66
33
Token Ring
34L0701
Token-Ring 16/4 PCI Adapter 2 with Wake on LAN12
Half
32-bit
1 ... 67
X
Universal
34L5001
16/4 Token-Ring PCI Management Adapter12
Half
32-bit
1 ... 67
X
Universal
33
34L5201
High-Speed 100/16/4 Token-Ring PCI Management Adapter12
Half
32-bit
1 ... 67
X
Universal
33
Communications13
33L4618
PCI V.90 56 Data/Fax Modem14
Half
32-bit
3 ... 6
-
5
33
37L14xx
Serial I/O SST 8, 16, and 128 port adapters15
Half
32-bit
3 ... 6
-
5
33
Full
32-bit
3 ... 620
Systems Management16
01K7209
Netfinity Advanced System Management PCI Adapter17
-
5
33
03K9309
Netfinity Advanced System Management Interconnect Cable Kit
-
-
-
-
-
-
36L9654
Netfinity Advanced System Management Token-RIng Connection19
-
-
-
-
-
-
Full
32-bit
3 ... 622
-
5
33
18
Host Attach
9086001
Netfinity ESCON Adapter21
1. The 5V slots support Universal or 5V adapters. The 3.3V slots support universal or 3.3V adapters. A Universal keyed 66MHz adapter plugged into a 33MHz slot will operate at 33MHz. A
Universal keyed 33MHz adapter plugged into a 66MHz slot limits other adapters installed on the same bus to 33MHz.
2. Slots three through six include hot-plug capability using IBM’s Active PCI technology. For Network Operating System support access www.pc.ibm.com/us/compat.
3. Models 8665-1 ... 3xY include a single ServeRAID-3HB. Models 4xY and above include a single ServeRAID-4M. One channel of these adapters is attached to the internal hot-swap
backplane. Remaining channels are available for external usage just as the option would be. All models include a dual-port, dual-channel, 64-bit Wide Ultra2 SCSI controller with one
internal connector and one external port with a 0.8mm Very High Density Connection Interface (VHDCI).
4. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides two channels, 64MB of battery-backed ECC cache and two internal and two external
Ultra160 connectors (only two connectors may be utilized). External connectors are 0.8mm VHDCI.
5. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides a single channel, 16MB of ECC cache and either one internal or one external Ultra160
connection. External connector is 0.8mm VHDCI.
6. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266MHz PowerPC 750 processor and provides 128MB of battery-backed ECC cache with two internal and up to four external
Ultra160 connectors (only four connectors may be utilized). External connectors are 0.8mm VHDCI.
7. Installation of a 33MHz adapter into a Bus A 66MHz slot will slow operation of all Bus A slots to 33MHz.
8. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector
with a 0.8mm VHDCI connector. Only one of the two connectors may be utilized.
9. See Netfinity Fibre Array Solutions section for additional configuration information.
10. The 2108R3L SAN Data Gateway Router Ultra SCSI LVD port replaces both the Single-ended and Differential SAN Data Gateway Routers (P/N 2108R3D and 2108R3S).
11. Netfinity 7600 includes a full-duplex, 10/100Mbps Ethernet PCI Controller.
12. The Wake-on LAN function of this option is not supported by this server.
104
13. Netfinity 7600 includes two USB ports, two high-speed serial/asynchronous ports (NS16550A compatible), and one high-speed (up to 2MB/sec. data transfer speed) bidirectional
parallel port supporting devices using ECP/EPP/SSP protocols adhering to the IEEE 1284 standard.
14. Due to homologation variances, modem availability may differ by country.
15. See Appendix E for details on Serial I/O Options and configuration limitations.
16. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into Netfinity 7600 works with Netfinity Director to provide significant system management
function. When used with optional Netfinity Advanced System Management PCI Adapter (P/N 01K7209) and Netfinity Advanced System Management Interconnect Cable Kit (P/N 03K9309)
additional management and control of up to 12 service processors from a remote console through a single modem or LAN connection is possible.
17. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56W AC adapter which requires a separate power source. Provides an integrated
10/100 Ethernet port and PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection (P/N 36L9654).
18. Required for all Netfinity servers containing a standard Advanced System Management Processor that are to be interconnected for system management support through a LAN or
modem connection (Netfinity 5500 models 8660-1 ... 4xU are not supported). Up to 12 service processors may be interconnected (including standard and optional processors) with an
aggregate connection length of no more than 91.4m (300ft). A customer-supplied Ethernet cable is required for each interconnection.
19.Contains an IBM Turbo 16/4 Token-Ring PCI Card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter, and a PC Card to 9-pin D-Shell cable
which is routed to a rear chassis cut-out. The Netfinity Advanced System Management PCI Adapter’s integrated Ethernet port and Netfinity Advanced System Management Token-Ring
Connection cannot be connected or used together. To download the latest firmware, access www.pc.ibm.com/us/netfinity. Select “Server Support,” “Family,” “Model,” “Downloadable files,”
and finally “Advanced Systems Management.”
20. A maximum quantity of one is supported.
21. Provides an ESCON MIC and a DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.
22. A maximum of two 9086001 adapters (installed in nonadjacent slots) are supported in a single server.
Slot 1- Bus A- 66MHz- 3.3V or Universal
Slot 2- Bus A- 66MHz- 3.3V or Universal
Slot 3- Bus B- 33MHz- 5V or Universal, Active PCI
Slot 4- Bus B- 33MHz- 5V or Universal, Active PCI
Slot 5- Bus B- 33MHz- 5V or Universal, Active PCI
Slot 6- Bus B- 33MHz- 5V or Universal, Active PCI
All Slots- Full Length, 64-bit
RAID Adapter
Netfinity 7600 Power, Monitor & Accessories
Part Number
Description
Power1
33L3760
250W Hot-Swap Redundant Power Supply
Uninterruptible Power Supply (UPS)2
94G3135
APC Smart-UPS 1000
94G3136
APC Smart-UPS 1400
94G6674
APC Smart-UPS 1400RMB3
94G6676
APC Smart-UPS 3000RMB3
37L6861
APC Smart-UPS 5000RMB4
Monitors5
633347N
E51 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6331N2N
E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black6
6332J1N
E74 Color Monitor 17in (403mm, 15.9in Viewable Image Size), stealth black6
66274AN
G78 Color Monitor 17in (454mm, 17.9in Viewable Image Size), stealth black6
9511AG1
T54A TFT LCD Color Monitor (306mm x 230mm, 15in Viewable), stealth black7
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
IBM NETFINITY 7600
1. Netfinity 7600 includes three 250W hot-swap redundant power supplies, with the ability to accept one additional 250W
Hot-Swap Redundant Power Supply (P/N 33L3760). Each power supply includes its own 9ft power cord for attachment to
a low voltage UPS, PDU or wall outlet. To assist in determining when an additional power supply is required to preserve
redundancy, a “Non-Redundant LED” is a standard feature of the Netfinity 7600. Predicting whether a particular
configuration will require an additional power supply for redundancy is very complex. However, once the system is
installed, the “Non-Redundant LED” will indicate when an additional power supply is required. The following sample
configuration is provided as a reference.
105
Number of
Power Supplies
System Configuration Supported
Typical Redundant Configuration
4 x Processors
38
6 x PCI Adapters
7 x Half-High or 10 x Slim-Line HDDs
16 x 512MB RDIMMs
4
Full Configuration with Redundancy
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. xSeries 250 uses an SVGA controller (S3 Trio 3D chipset) with 4MB of video memory.
6. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity
Rack Keyboard Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
8. The addition of a DLT tape drive may require a fourth power supply to preserve redundancy.
Part Number
Description
Conversion Kits
37L6860
8Ux24D Rack-to-Tower Kit1
Rack and NetBAY2
930842P
Netfinity Enterprise Rack
930842X
Netfinity Enterprise Expansion Cabinet
9306900
Netfinity Rack
9306910
Netfinity Rack (includes perforated front door)
9306200
Netfinity NetBAY22
10L6912
Netfinity NetBAY33
Keyboard and Mouse4
28L3644
Space Saver II Keyboard5, 7
01K1260
TrackPoint IV 104-Key Black Keyboard6,7
28L3621
Preferred Keyboard (stealth black)6
28L3673
Sleek 2-Button Stealth Black Mouse
1. Includes one Netfinity NetBAY3 with casters.
2. Netfinity 7600 rack models are housed in a 19in rack mountable drawer and require one of the racks listed here.
See Rack Cabinet and Options section for IBM rack supported devices.
3. Netfinity 7600 requires 8Ux24D Rack-to-Tower Kit (P/N 37L6860) for use with a NetBAY3. A maximum of three
NetBAY3 enclosures, including the one which ships with the conversion kit, may be stacked beneath a supported
Netfinity tower server. Optional NetBAY3s must be shipped separately and not while attached to the base
configuration. See IBM Netfinity NetBAY3 Stackable Enclosure section for supported devices.
4. Netfinity 7600 ships without a keyboard or mouse.
5. Installation within a rack requires optional keyboard tray (P/N 28L4707) (stows in ready-to-use position).
6. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard
tray with a flat panel display.
7. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
106
Netfinity 7600 Tape Options
Part
Number
Tape Drives
Bays
Supported
SCSI
Interface
(bit)
00N7991
20/40GB DDS/4 4mm Internal Tape Drive
1, 2
16 Ultra2 LVD
00N7990
40/80GB DLT Internal SCSI Tape Drive
1+2
16 Ultra2 LVD
00N8017
60/120GB 8mm M2 SCSI Tape Drive
1, 2
16 Ultra2 LVD
09N4040
20/40GB DLT Internal SCSI Tape Drive
1+2
8
00N8016
100/200GB LTO Tape Drive
1+2
16 Ultra2 LVD
24P2396
100/200GB LTO Half-High Tape Drive
1, 2
16 Ultra2 LVD
3502108
DLT Tape Autoloader
N/A
16
00N7992
120/240GB DOS/4 Tape Autoloader
1+2
16 Ultra2 LVD
Form
Factor
89mm
(3.5in) HH
or 133mm
(5.25in) HH
133mm
(5.25in) FH
133mm
(5.25in) HH
133mm
(5.25in) FH
133mm
(5.25in) FH
133mm
(5.25in) HH
Termination
Included
68/50-pin
Converter
Incl
Ext Tape
Enclosures
N
N/A
N
N/A
N
N/A
N
Y
N
N/A
35510011
N
N/A
35510011
Y
N/A
-
N
N/A
35510011
35100202,
35510011
3503B0X2,
35510011
35100202,
35510011
3503B0X2
3551001
Tape Autoloaders
Desktop
133mm
(5.25in) FH
External Tape Libraries3
Y
-
-
Diff
Desktop or
Rack
6U Rack
Y
N/A
-
-
8, 16
16
16
16 LVD
Desktop
Desktop
Rack
-
N
N
Y
N
N
N
N
N
3551001
-
16 LVD/SE
Ext
Y
N
-
16 LVD
Int
Y
N
3502x14
DLT Tape Library
-
16
3570C2X
Magstar MP 3570 Tape Subsystem
-
3510020
3503B0X
3551001
10L7113
External Half High SCSI Storage Enclosure4
DLT External SCSI Enclosure5
NetMEDIA Storage Expansion Unit EL6
NetMEDIA Systems Management Adapter7
-
External Tape Enclosures
Associated Options
00N7956
10K2340
68-pin External Multimode LVD/SE SCSI
Terminator
Media BayTray and LVD Cable Kit1
3510020,
3503B0X
3551001
Note: Netfinity 7600 includes a two-drop multimode terminated LVD SCSI cable, an available internal Ultra2 SCSI port and an external Ultra2 0.8mm VHDCI connector.
1. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) requires replacement of the standard single-ended internal cables with one or more
(depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop mult-mode terminated cable. If the standard cables are used for
attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
2. Requires 68-pin External Multimode LVD/SE SCSI terminator (P/N 00N7956).
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. Provides a black desktop 133mm (5.25in) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self-termination
or 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
5. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI
terminator (P/N 00N7956).
6. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, 19in rack or NetBAY3/3E mountable tape enclosure which includes two full-high (FH) or four half-high (HH) extended
length 133mm (5.25in) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies
and two power cords are also included. Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a 930842x rack.
7. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a 3551001 to provide repeater function, LVDS interface, aggregate cable lengths up to 12m when attached to an
LVD SCSI controller, and auto-termination when the 3551001 is powered off. External connector is 0.8mm VHDCI.
IBM NETFINITY 7600
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
107
Netfinity 7600 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or
IBM Marketing Representative for assistance with your specific configuration requirements.
High Availability Application Server
Part Number
Description
8665-5RY
33L3113
33L3115
33L3117
10K2332
37L7201
37L7202
00N7990
33L3760
66274AN
28L3644
94G6674
Netfinity 7600 700/2MB Xeon, 512MB(R) ECC, RAID, Open, 40X, PCI (Rack 8U)
Netfinity 128MB, 100MHz ECC SDRAM RDIMM
Netfinity 256MB, 100MHz ECC SDRAM RDIMM
Netfinity 512MB, 100MHz ECC SDRAM RDIMM
Netfinity 700MHz/2MB Upgrade II with Pentium III Xeon Processor
9.1GB Ultra160 SCSI Hot-Swap SL HDD
18.2GB Ultra160 SCSI Hot-Swap SL HDD
40/80GB DLT Internal SCSI Tape Drive
250W Hot-Swap Redundant Power Supply
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black
Space Saver II Keyboard
APC Smart-UPS 1400RMB
35311RU
EXP300 Storage Expansion Unit
37L7206
36.4GB 10K-4 Wide Ultra160 SCSI Hot-Swap SL HDD
Quantity
Usage
1
4
4
4
3
2
61
1
1
1
1
1
4GB Total System Memory
Total of 4 SMP processors
9.1GB mirrored for NOS
72GB RAID 5 with Hot-Spare
Full Power Redundancy
1
Includes 2M Ultra2 cable
RAID 5 Data Storage with HotSpare
-
External Storage
14
Rack
9306200
09N4290
94G6667
94G7447
94G6670
Netfinity NetBAY22
NetBAY 1x4 Console Switch
Power Cable - Type A14
NetBAY Console Cable Set-12ft
Blank Filler Panel Kit
1
1
1
1
1
1. Six HDDs are used for RAID 5 protection. One HDD is identified as a hot-spare. Effective capacity is four HDDs or 72.8GB
This rack server is configured to act as the foundation for business critical applications, applications your business cannot afford to be without. Configured with
enough HDDs to mirror the operating system and provide a standard RAID 5 environment for data, optional hot-swap redundant power and UPS for power even
during a blackout, this server represents the leading edge in high availability. An internal tape drive is included to back up that all important asset--data. A modem
could be included to allow out-of-band (non-LAN) system management utilizing the integrated Netfinity Advanced System Management Processor.
Server Consolidation
Part Number
8665-4RY
33L3113
10K2331
37L7204
37L7205
06P3601
00N7990
66274AN
28L3644
94G6674
9306200
09N4290
94G6667
94G7447
94G6670
Description
Netfinity 7600 700/1MB Xeon, 512MB(R) ECC, RAID, Open, 40X, PCI (Rack 8U)
Netfinity 128MB, 100MHz ECC SDRAM RDIMM
Netfinity 700MHz/1MB Upgrade II with Pentium III Xeon Processor
9.1GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
10/100 Ethernet Server Adapter
40/80GB DLT Internal SCSI Tape Drive
G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black
Space Saver II Keyboard
APC Smart-UPS 1400RMB
Rack
Netfinity NetBAY22
NetBAY 1x4 Console Switch
Power Cable - Type A14
NetBAYConsole Cable Set 12ft
Blank Filler Panel Kit
Quantity
Usage
1
4
1
2
81
3
1
1
1
1
1GB Total System Memory
Total of 2 SMP processors
9.1GB mirrored for NOS
109GB RAID 5 with Hot-Spare
Total of 4 Ethernet connections
-
1
1
1
1
2
Attaches to monitor
-
-
1. Eight HDDs are used for RAID 5 protection. One HDD is identified as a hot-spare. Effective capacity is six HDDs or 109.2GB
This rack server is configured to meet the need of server consolidation. Many businesses are trying to achieve better control of the dispersed departmental servers
that have grown up around the enterprise. By moving multiple servers on to one platform, there is only one system to manage both hardware and software. There is
potentially less expense for service, software licenses, etc., and there is less concern about single points of failure because the Netfinity 7600 is designed for high
availability. This configuration includes 109GB of internal HDD storage, features three power supplies which provide fully redundant power, a UPS to help protect the
system against a momentary electricity loss, and an internal tape drive that backs up as much as 80GB per tape--in addition to all the standard features of the
Netfinity 7600.
108
r
Pa
um
tN
r
be
IBM STORAGE
EXPANSION UNIT
IBM External Storage Expansion Unit Overview
B)
(G
)
ity
l
i
c
)
a
va
ap
l/a
xH
ta
D
e
eC
o
p
g
t
x
(
a
Ty
or
(W
ys
St
em
ns
Ba
s
o
st
m
i
p
y
y
u
s
a
bs
wa
en
lB
xim
m
Su
t-S
ta
Ma
Di
Ho
To
r
Fo
m
or
ct
Fa
ly
pp
Wt
Su
fg
r
C
x
we
Ma
Po
IBM External Storage Expansion At-A-Glance
35421RU
FAStT200
Fibre Channel
10
10/10
364
480mm x 575mm x 131.8mm
(18.9in x 22.63in x 5.2in)
Rack Drawer (3U)
42.3kg
(94.0lbs)
Redundant
350W
35422RU
FAStT200 HA5
Fibre Channel
10
10/10
364
480mm x 575mm x 131.8mm
(18.9in x 22.63in x 5.2in)
Rack Drawer (3U)
42.3kg
(94.0lbs)
Redundant
350W
35311RU
EXP300
Ultra160 LVDS
14
14/143
509.6
444mm x 519mm x 127.5mm
(17.5in x 20.4in x 5.0in)
Rack Drawer
(3U)1
34.5kg
(76.1lbs)
Redundant
500W
35601RU FAStT
EXP500
Fibre Channel4
10
10/10
364
447mm x 56mm x 128mm
(17.6in x 22.2in x 5.0in)
Rack Drawer (3U)
36.1kg
(79.6lbs)
Redundant
350W
To attach a Storage Enclosure to an IBM xSeries or Netfinity server, the following is required:
* Attachment to an appropriate SCSI controller.
* External Cable(s) - See Appendix D: Cables - Storage Units - Controllers.
1. A rack-to-tower conversion kit option is available.
2. Supports the use of slim-line drives only.
3. Attachment to a FAStT500 Storage Server (P/N 35521RU) is required for this device to function. See FAStT EXP500 Configurator section for more information.
4. Identical to FAStT200 (P/N 35421RU) with the addition of a second FAStT200 Failsafe RAID Controller.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
109
FAStT200 Storage Server (3542xRU)
FAStT200 (HA) Storage Expansion Unit
Total Internal
Storage1
10,000RPM HDDs
15,000RPM HDDs
18.2GB2
36.4GB
73.4GB
18.2GB
(19K0652)
(19K0653)
(19K0654)
(06P5707)
0GB
Standard on base models
18.2GB
1
-
-
1
36.4GB
2
1
-
2
54.6GB
3
-
-
3
72.8GB
4
2
-
4
73.4GB
-
-
1
-
91.0GB
5
-
-
5
109.2GB
6
3
-
6
145.6GB
8
4
-
8
146.8GB
-
-
2
-
182.0GB
10
5
-
10
218.4GB
-
6
-
-
220.2GB
-
-
3
-
254.8GB
-
7
-
-
291.2GB
-
8
-
-
293.6GB
-
-
4
-
327.6GB
-
9
-
-
364.0GB
-
10
-
-
367.0GB
-
-
5
-
440.4GB
-
-
6
-
513.8GB
-
-
7
-
587.2GB
-
-
8
-
660.6GB
-
-
9
-
734.0GB (max)
-
-
10
-
This table does not represent all valid HDD configurations.
1. Select a total storage row and then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal
Storage listed is within +/- 0.2GB unless otherwise noted.
2. When referring to hard disk drive capacity, GB equals one billion bytes. Total user accessible capacity may vary depending on
operating environments.
Part
Number
Description
RPM
Height
Bays
Supported
Max Qty Supported
19K0652
Netfinity 18.2GB 10K-4 FC Hot-Swap HDD
10,000
SL
1 ... 10
10
19K0653
Netfinity 36.4GB 10K-4 FC Hot-Swap HDD
10,000
SL
1 ... 10
10
19K0654
Netfinity 73.4GB 10K-4 FC Hot-Swap HDD
10,000
HH
1 ... 10
10
06P5707
Netfinity 18.2GB 15K-rpm FC Hot-Swap HDD
15,000
SL
1 ... 10
10
External Storage Expansion Units
35421RU
FAStT200 Storage Server1, 2
35422RU FAStT200 HA Storage Server1
19K1121
FAStT200 Redundant RAID Controller
Form Factor
Rack (3U)
Rack (3U)
-
1. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power cord.
2. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).
110
FAStT200 Storage Server1
35421RU2 / 35422RU
OUT
IN
OUT
IN
Loop A
Bay 1
Bay 2
Bay 3
Bay 4
Bay 5
Bay 6
Bay 7
Bay 8
Bay 9
Bay 10
External: Fibre Channel
Internal: Fibre Channel
Auto Termination
Fibre Channel
Connectors3
FASTT200 STORAGE SERVER
Loop B
1. Housed in a 19in rack-mountable drawer and ships standard with redundant power supplies
and two power cables requiring separate power sources.
Requires an IBM industry standard 19in rack, EIA-310D with a minimum depth of 24in
(711.2mm ) or NetBAY3/3E.
Select optional storage controllers and external cables, which are not included with the
FAStT storage server or external enclosure, using the Fibre Channel Device Ports Reference.
2. 35421RU includes a single loop only. The second loop is created with the addition of
FAStT200 Redundant RAID Controller (P/N 19K1121).
3. GBICs are not included. Either Fibre Channel long-wave GBICs (P/N 03K9307 or short-wave
(P/N 03K9308) GBICs may be used.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
111
IBM EXP300 (35311RU)
EXP300 Hard Disk Drive (HDD) Storage
Total Int.
Storage1
7200RPM HDDs
9.1GB
(37L7201)
18.2GB
10,000RPM HDDs
36.4GB
9.1GB
18.2GB
15,000RPM HDDs
36.4GB
9.1GB
18.2GB
(37L7202) (37L7203) (37L7204) (37L7205) (37L7206) (19K0655) (19K0656)
0GB
Standard on base models
18.2GB
2
1
-
2
1
-
2
36.4GB
4
2
1
4
2
1
4
1
2
54.6GB
6
3
-
6
3
-
6
3
72.8GB
8
4
2
8
4
2
8
4
91GB
10
5
-
10
5
-
10
5
109.2GB
12
6
3
12
6
3
12
6
127.4GB
14
7
-
14
7
-
14
7
145.6GB
-
8
4
-
8
4
-
8
182GB
-
10
5
-
10
5
-
10
218.4GB
-
12
6
-
12
6
-
12
254.8GB
-
14
7
-
14
7
-
14
291.2GB
-
-
8
-
-
8
-
-
364.0GB
-
-
10
-
-
10
-
-
436.8GB
-
-
12
-
-
12
-
-
509.6GB
(max)
-
-
14
-
-
14
-
-
This table does not represent all possible HDD configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal
Storage listed is within +/- 0.2GB unless otherwise noted.
SCSI ID
Form Height Front Usage
Factor
Access
0 ... 6
HS
SL
Yes
open
8 ... 14
HS
SL
Yes
open
Maximum MB/s
Cable
Length
Part
Number
Description
RPM
Height
Bays
Max
Supported1 Qty
Ultra 160 HDDs2
37L7201
9.1GB Wide Ultra2 SCSI HotSwap SL HDD
7200
SL
1 ... 14
143
37L7202
18.2GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
1 ... 14
143
37L7203
36.4GB Ultra160 SCSI Hot-Swap
SL HDD
7200
SL
1 ... 14
143
37L7204
9.1GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
1 ... 14
143
37L7205
18.2GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
1 ... 14
143
37L7206
36.4GB 10K-4 Ultra160 SCSI HotSwap SL HDD
10,000
SL
1 ... 14
143
(Meters)
Ultra2
Controller
Ultra160
Controller
2
80
160
19K0655
9.1GB 15Krpm Ultra160 SCSI HotSwap HDD
15000
SL
1 ... 14
143
4.2
80
160
19K0656
18.2GB 15Krpm Ultra160 SCSI
Hot-Swap HDD
15000
SL
1 ... 14
143
1. The EXP300 ships with a single Ultra2 SCSI cable similar to
Netfinity 2M Ultra2 SCSI Cable (P/N 03K9310).
External Storage
Expansion Units
Form
Factor
35311RU
EXP300 Storage Expansion Unit4
Rack
(3U)
09N7296
EXP300 Rack-to-Tower
Conversion Kit
-
1. EXP300 Storage Expansion Unit ships with 14 slim-line hot-swap bays which can be configured as a single
bus, two independent buses or a twintailed single bus.
2. When combined with a ServeRAID-4x controller, Ultra2 and Ultra160 HDDs may be mixed on the same bus
and operate at up to their maximum respective speeds.
3.Twintailing reduces the maximum number of HDDs on a single bus to 13.
4. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each
with its own power cord.
112
EXP3001
2 x 0.8mm VHDCI
Connectors
35311RU
Selectable Bus Configuration
2 x 7 bays
1 x 142 bays
Ultra2 and/or Ultra160 HDDs3
Auto Termination
SCSI IDs 0...6
SCSI IDs 8...14
1. Housed in a 19in rack mountable drawer and ships
standard with redundant 500W hot-swap power supplies,
two power cords and a single 2M Ultra2 SCSI cable capable
of supporting Ultra160 speeds.
2. Twintailing reduces the maximum number of HDDs on a
single bus to 13.
3. When combined with a ServeRAID-4x controller, Ultra2
and Ultra160 HDDs may be mixed on the same bus and
operate at up to their maximum respective speeds.
Requires IBM Netfinity Enterprise Rack (930842P) or
Expansion Cabinet (930842X), Rack (9306900), NetBAY22
(9306200), NetBAY3 (10L6912), NetBAY3E (36L9701) or
Rack-to-Tower Conversion Kit (09N7296).
IBM NETFINITY EXP300
External Storage Expansion Units require storage
controllers and external cables. Select a supported controller
from the system configurator and cables from Appendix D:
Cables - Storage Units - Controllers.
Cables and Controllers:
See Appendix D: Cables - Storage Units - Controllers
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
113
EXP300 Sample Configurations
EXP300 One Independent SCSI Bus
SERVER
EXP300 Two Independent SCSI
Buses
To configure as two independent seven-bay SCSI
buses, attach two external cables from two
ServeRAID adapters, in the same or separate
servers, to the two external ports of the EXP300.
The EXP300 must be set for 2 x 7 bays.
ServeRAID
3x or 4x
SERVER
Cable Group A1
SERVER
ServeRAID
3x or 4x
ServeRAID
3x or 4x
OR
OR
Selectable Bus Configuration
1 x 14 bays
ServeRAID
3x or 4x
Cable Group A1
Selectable Bus Configuration
2 x 7 bays
SCSI IDs 0 ... 14
Order:
• 1 x 35311RU
• 1 x External Cable from Group A1
• Up to 14 Ultra2 and/or Ultra160 HDDs
1. One 2M Ultra2 cable is included with each EXP300.
If a longer cable is desired, select one from cable
group A.
EXP300 One Independent Twintail
SCSI Bus High Availability
Configuration
To configure as one independent twintailed 13-bay
SCSI bus, attach two external cables from two
ServeRAID adapters, in the same or separate servers,
to the two external ports of the EXP300. The EXP300
must be set for 1 x 142 bays.
SERVER
SERVER
ServeRAID
3x or 4x
ServeRAID
3x or 4x
OR
ServeRAID
3x or 4x
Cable Group A1
Selectable Bus Configuration
1 x 142 bays
SCSI IDs 0 ... 5, 8 ... 14
Order:
• 1 x 35311RU
• 2 x External Cables from Group A1
• Up to 13 Ultra2 and/or Ultra160 HDDs
1. One 2M Ultra2 cable is included with each EXP300. If a
longer cable is desired, select one from cable group A.
2. Twintailing reduces the maximum number of HDDs on a
single bus to 13.
114
SCSI IDs 0...6
SCSI IDs 8...14
Order:
• 1 x 35311RU
• 2 x External Cables from Group A1
• Up to 14 Ultra2 and/or Ultra160 HDDs
1. One 2M Ultra2 cable is included with each EXP300.
If a longer cable is desired, select one from cable
group A.
IBM FAStT EXP500 (35601RU)
FAStT EXP500 Storage Expansion Unit
Total Internal
Storage1
10,000RPM HDDs
15,000RPM HDDs
18.2GB
36.4GB
73.4GB
18.2GB
(19K0652)
(19K0653)
(19K0654)
(06P5707)
0GB
Standard on base models
18.2GB
1
-
-
1
36.4GB
2
1
-
2
54.6GB
3
-
-
3
72.8GB
4
2
-
4
73.4GB
-
-
1
-
91.0GB
5
-
-
5
109.2GB
6
3
-
6
145.6GB
8
4
-
8
146.8GB
-
-
2
-
182.0GB
10
5
-
10
-
218.4GB
-
6
-
220.2GB
-
-
3
-
254.8GB
-
7
-
-
291.2GB
-
8
-
-
293.6GB
-
-
4
-
327.6GB
-
9
-
-
364.0 B
-
10
-
-
367.0GB
-
-
5
-
440.4GB
-
-
6
-
513.8GB
-
-
7
-
587.2GB
-
-
8
-
660.6GB
-
-
9
-
734.0GB (max)
-
-
10
-
This table does not represent all valid HDD configurations.
1. Select a total storage row and then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal
Storage listed is within +/- 0.2GB unless otherwise noted.
Part
Number
Description
RPM
Height
Bays
Supported
Max Qty Supported
10
19K0652
Netfinity 18.2GB 10K-4 FC Hot-Swap HDD
10,000
SL
1 ... 10
19K0653
Netfinity 36.4GB 10K-4 FC Hot-Swap HDD
10,000
SL
1 ... 10
10
19K0654
Netfinity 73.4GB 10K-4 FC Hot-Swap HDD
10,000
HH
1 ... 10
10
06P5707
Netfinity 18.2GB 15K-rpm FC Hot-Swap HDD
15,000
SL
1 ... 10
10
External Storage Expansion Units
35601RU
FAStT EXP500 Storage Expansion Unit1
Form Factor
Rack (3U)
IBM FASTT EXP500
1. The FAStT EXP500 ncludes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power cord.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
115
FAStT EXP5001
Fibre Channel
Connectors2
35521RU
OUT
IN
IN
Loop A
Bay 1
Bay 2
Bay 3
Bay 4
Bay 5
Bay 6
Bay 7
Bay 8
Bay 9
Bay 10
External: Fibre Channel
Internal: Fibre Channel
Auto Termination
OUT
Loop B
1. Housed in a 19in rack mountable drawer and ships standard with redundant power supplies
and two power cables requiring separate power sources.
Requires an IBM industry standard 19in rack, EIA-310D with a minimum depth of 24in
(711.2mm ) or NetBAY3/3E.
Select optional storage controllers and external cables, which are not included with the
FAStT storage server or external enclosure, using the Fibre Channel Device Ports Reference.
2. GBICs are not included. Either Fibre Channel long or short-wave GBICs (P/N 03K9307 or
03K9308 respectively) may be used.
116
r
be
tN
um
S
S
S
S
S
-
S
S
E
E
E
H
E
H
H
-
E
-
E
E
E
H
E
H
H
-
S
E
-
S
S
S
-
-
S
-
E
E
E
E
E
H
H
S
S
E
E
E
E
E
E
E
H
H
S
S
E
E
E
E
E
E
H
H
S
S
E
E
E
E
E
H
H
-
S
H
E
E
E
E
H
H
-
S
-
E
E
E
E
H
H
-
S
H
-
Short-wave connection only. See Fibre Device Ports Reference section for GBIC/Integrated port information.
Either short-wave or long-wave connections allowed via the appropriate GBIC. See Fibre Device Ports Reference section for GBIC/Integrated port information.
Hardware connection: One of these devices installs directly into the other, i.e., the FAStT500 Mini Hub (P/N 00N6882) installs directly into the FAStT500 Storage Server
(P/N 35521RU) to provide GBIC availability.
FAStT Host Adapter
FAStT500 Mini Hub
FAStT200 Redundant RAID Controller
SAN Data Gateway Router UltraSCSI
LVD Port
SAN FC Switch, 8-Port
SAN FC Switch, 16-Port
SAN FC Managed Hub
FAStT200 Storage Server
FAStT200 HA Storage Server
FAStT500 Storage Server
FAStT EXP500
FC Long-Wave GBIC
FC Short-Wave GBIC
Fibre Interconnection Guidelines
1. This device requires the use of GBICs. Purchase of GBICs may be needed in order to make connections to this device. See the Fibre Device Ports Reference section for
GBIC/Integrated port information.
S
E
H
2109S08
2109S16
35341RU
35421RU
35422RU
35521RU
35601RU
03K9307
03K9308
2108R3L
00N6881
00N6882
19K1121
Pa
r
tio
n
cr
ip
De
s
Fibre Array Solutions
NETFINITY FIBRE
ARRAY SOLUTIONS
E
E
E
E
E
E
H
H
-
E
-
00
N
Ho 68
st 81
A
da FAS
p t tT
er
00
N
Mi 688
ni
2
Hu FA
b 1 S tT
19
K
Re 112
1
d
u
n R Fas
aid tT2
00
C
o
21
nt
0
ro
Ga 8R3
lle
L
te
r1
wa SA
N
y
D
Ro
u t a ta
21
er
0
Sw 9S0
8
i
t
c
h, SAN
8-P
F
or 1 C
t
21
09
S
S
w
itc 16 S
h
, 1 AN
F
6Po C
rt 1
35
3
M 41R
a
U
n
a
ge SAN
dH
F
ub 1 C
35
4
St 21R
o
r
ag U F
A
e
S e S tT
2
rv
er 1 0 0
35
4
St 22R
or
ag U FA
eS
St
e
r v T20
35
er 1 0
5
HA
St 21R
or
U
a
g
e S FAS
er tT5
ve 1 00
35
r
6
EX 01R
P5
U
00 1 FA
St
T
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
117
Fibre Device Ports Reference
Part
Number
Description
00N6881
00N6882
03K9307
03K9308
19K1121
FAStT Host Adapter
FAStT500 Mini Hub1
FC Long-Wave GBIC
FC Short-Wave GBIC
FAStT200 Redundant RAID Controller
San Data Gateway Router UltraSCSI
LVD Port2
SAN FC Switch, 8-Port
SAN FC Switch, 16-Port
SAN FC Managed Hub
FAStT200 Storage Server
FAStT200 HA Storage Server
FAStT500 Storage Server
FAStT EXP500
2108R3L
2109S08
2109S16
35341RU
35421RU
35422RU
35521RU
35601RU
Total
Integrated
Mini
Mini
Connections
Ports3
Hubs
Hubs
Possible
Possible Installed
GBIC
Ports
GBICs
Included3
1
2
1
1
2
1
-
-
-
2
2
-
1
1
-
-
-
-
8
16
8
2
4
164
4
7
-
8
-
4
-
8
16
1
2
4
161
4
4
4
-
1. Each FAStT500 Mini Hub provides two GBIC ports.
2. One integrated short-wave optical port and two SCSI ports for tape storage connections (one LVD or HVD Differential and one Single-ended).
3. Standard GBICs and integrated optical ports support are short-wave.
4. FAStT500 Storage Server supports up to eight nonredundant or four redundant host connections and up to eight nonredundant or four redundant storage
connections.
Supported Cable Groups
Cable Group A (0.8mm to 0.8mm)
03K9310
Netfinity 2M Ultra2 SCSI Cable
03K9311
Netfinity 4.2M Ultra2 SCSI Cable
37L7101
Netfinity 20M Ultra2 SCSI Cable
Cable Group D (Short-Wave Fibre)
36L9973
Netfinity Fibre Channel 1M Cable
03K9306
Netfinity Fibre Channel 5M Cable
03K9305
Netfinity Fibre Channel 25M Cable
Customer supplied short-wave cable of up to 500M
(0.31 miles)
Cable Group E (Long-Wave Fibre)
Customer supplied long-wave cable of up to 10KM
(6.2 miles)
GBIC
03K9308
Netfinity Fibre Channel Short-Wave
GBIC1
03K9307
Netfinity Fibre Channel Long-Wave
GBIC
1. Four Netfinity Fibre Channel Short-Wave GBIC’s (P/N
03K9308) are included with SAN Fibre Channel Switches (P/Ns
2109S08 and 2109S16).
118
NETFINITY FIBRE
ARRAY SOLUTIONS
Netfinity FAStT500 Mini Hub
00N6882
Netfinity FAStT Host Adapter
00N6881
GBIC Ports
Netfinity FAStT Host
Adapter
• PCI to FCAL 64/32-bit host adapter.
• Supported Attachments (use cable group D):
FAStT500 Storage Server
• Integrated short-wave optical port. No GBICs required.
• Full Fibre Channel Fabric support.
GBIC
• Provides additional connections to the Netfinity FAStT500
Storage Server - supports complex clustering or advanced
storage applications.
• All connections to FAStT500 Mini Hubs require the use of
GBICs. GBICs are not included.
FAStT500 Storage Server
35521RU
Mini Hub
FAStT200 Storage Server 35421RU
Mini Hub
Expansion Bays for
Additional Mini Hubs
GBIC Port
10/100 Ethernet Port
RS-232
GBIC Ports
GBIC Ports
Hot-swap Fan
Hot-swap Power
GBIC Port
Hot-swap Fan
Supplies
Power Supplies
• Dual high-performance, RAID controller cards-supports up to
100MB/sec data transfer rate per controller.
• Two 175W auto-ranging, hot-swap, redundant power supplies.
• Attach directly to FAStT Host Adapter(s) (P/N 00N6881) with shortwave cables and GBICs or indirectly through SAN Fibre Channel
Managed Hub (P/N 35341RU) using cables from cable group D or E
with corresponding GBICs.
• Height is 4U (1U = 1.75in or 44.45mm)
• Requires Netfinity Enterprise Rack or Expansion Cabinet, Netfinity
Rack, Netfinity NetBAY22 or 19-inch EIA-D Industry-Standard Rack.
Mounting rails are included with the controller.
• For optimum performance no more than two FAStT500 Storage
Servers (P/N 35521RU) should be attached to a single hub (P/N
35341RU)
• Includes four FAStT500 Mini Hubs (P/N 00N6882), two for host and
two for storage.
• FAStT500 256MB Cache (P/N 00N6883) expansion is required in
installations where a large number of devices are supported.
• All connections to FAStT500 Mini Hubs require the use of GBICs.
GBICs not included.
• Contains a single hot-plug, RAID controller which provides a single
host Fibre Channel arbitrated loop and a single storage Fibre Channel
arbitrated loop.
• Can be upgraded to a FAStT200 HA Storage Server through the
addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).
• Integrated 10/100Mbps Ethernet connector and RS-232 service
support port.
• Performance optimized for 30 HDDs - supports optional FAStT
EXP500 Storage Expansion Units (P/N 35601RU).
• Two hot-swap 350W auto-ranging, redundant power supplies.
• Redundant fans - two hot-swap, dual-fan units.
• LED indicators on all critical components warn of faults,
over-temperature, and other abnormalities.
• Ten drive bays - supports slim-high or half-high Fibre Channel hotswap HDDs.
• Height is 3U (1U=1.75in or 44.45mm.
• Requires Netfinity Enterprise Rack or Expansion Cabinet, Netfinity
Rack, Netfinity NetBAY22 or 19in EIA-D industry standard rack.
Mounting rails are included with the controller.
• Supports long- and short-wave connections. Requires optional
GBICs for each connection. GBICs not included.
FAStT200 HA Storage Server 35422RU
GBIC Port
10/100 Ethernet Port
RS-232
Netfinity Fibre Channel RAID Controller
(35261RU)
Standard Fibre Channel
RAID Controller
Netfinity Fibre Channel
Failsafe RAID Controller Opt
(P/N 01K7296)
• Contains a single integrated short-wave optical port (use cable group D)
and six female 0.8mm Very High Density Connection Interface (VHDCI)
SCSI connectors.
• Hot-Swap Redundant Fans and Power Supplies.
• Optional Netfinity Fibre Channel Failsafe RAID Controller (P/N 01K7296)
provides a redundant RAID controller and second Short-Wave Fibre
Connection (use cable group D).
• Attach directly to FAStT Host Adapter(s) (P/N 00N6881) or indirectly
through SAN Fibre Channel Managed Hub (P/N 35341RU) using cables
from cable group D.
• Height is 4U (1U =1.75in or 44.45mm).
• Requires Netfinity Enterprise Rack or Expansion Cabinet, Netfinity Rack,
Netfinity NetBAY22 or 19in EIA-D Industry-Standard Rack. Mounting rails
are included with the controller.
• For optimum performance no more than two RAID controller units (P/N
35261RU) should be attached to a single hub.
Updated 03/22/01
Hot-swap Fan
Hot-swap Power
GBIC Port
Hot-swap Fan
• Contains two hot-plug, RAID controllers. Each controller provides a
single host Fibre Channel arbitrated loop and a single storage Fibre
Channel arbitrated loop.
• Integrated 10/100Mbps Ethernet connector and RS-232 service
support port.
• Performance optimized for 30 HDDs-- supports optional FAStT
EXP500 Storage Expansion Units (P/N 35601RU).
• Two hot-swap 350W auto-ranging, redundant power supplies.
• Redundant fans - two hot-swap, dual-fan units.
• LED indicators on all critical components warn of faults,
over-temperature, and other abnormalities.
• Ten drive bays - supports slim-high or half-high Fibre Channel hotswap HDDs.
• Height is 3U (1U=1.75in or 44.45mm).
• Requires Netfinity Enterprise Rack or Expansion Cabinet, Netfinity
Rack, Netfinity NetBAY22 or 19in EIA-D industry standard rack.
Mounting rails are included with the controller.
• Supports long- and short-wave connections. Requires optional
GBICs for each connection. GBICs not included.
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
119
SAN Fibre Channel Switch, 8 and 16 Ports
2109S08/S16
FAStT EXP500 Storage Expansion Unit
35601RU
GBIC Ports
GBIC Ports
with GBICs
GBIC Ports
8 -port
P/N 2019S08
GBIC Ports
with GBICs
GBIC Ports
16-port switch
Hot-swap
Fan
Hot-swap
Power Supplies
P/N 2019S16
Hot-swap
Fan
• Two hot-swap, 350W auto-ranging, redundant power supplies.
• Redundant fans - two hot-swap, dual-fan units.
• LED indicators on all critical components warn of faults,
over-temperature, and other abnormalities.
• Ten drive bays - supports slim-high or half-high Fibre Channel
hot-swap HDDs.
• Height is 3U (1U = 1.75in or 44.45mm).
• Requires Netfinity Enterprise Rack or Expansion Cabinet,
Netfinity Rack, Netfinity NetBAY22 or 19in EIA-D IndustryStandard Rack. Mounting rails are included with the controller.
• Requires optional GBICs for each connection. GBICs not
included.
EXP300 Storage Expansion Unit 35311RU
GBIC Ports
with GBICs
GBIC Ports
• Each port delivers up to 100MB/sec, full-duplex data transfer.
• Comes with four short-wave GBICs installed.
• Embedded Web browser configuration, management and
service.
• Support for Public Fibre Channel Arbitrated Loops.
• Optional power supply (P/N 09L5403) available.
• The 8-port switch is 1U (1U=1.75in or 44.45mm) high and
the 16-port switch is 2U (1U=1.75in or 44.45mm) high.
SAN Fibre Channel Managed Hub
35341RU
SCSI Connectors
10/100 Ethernet Port
Serial Port
Power
Hot-swap Power Supplies with
Integrated Fan
• Fourteen slim-high drive bays.
• Supports Ultra160 SCSI data transfer speeds - up to 160MB/s.
• Single or dual SCSI bus configurations.
• Dual hot-swap 500W redundant power supplies with integrated
fan assemblies.
• Height is 3U (1U=1.75in or 44.45mm).
• Tower capability through optional Rack-to-Tower Conversion Kit.
• Requires Netfinity Enterprise Rack or Expansion Cabinet,
Netfinity Rack, Netfinity NetBAY22 or 19in EIA-D
Industry-Standard Rack. Mounting rails are included with
the controller.
120
Integrated ShortWave Optical Ports
GBIC Port
• High-speed performance utilizing nonblocking switch-based
technology.
• Simultaneous 100MB/sec full duplex data transfers across all
ports.
• Eight ports total, one that is configurable with either an
optional short-wave or long-wave GBIC and seven integrated
short-wave optical ports.
• Support for industry standard MIBs enabling standard SNMP
management.
• Height is 1U (1U=1.75in or 44.45mm) high.
NETFINITY FIBRE
ARRAY SOLUTIONS
Fibre / Fibre Configuration Examples (FAStT200)
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your
IBM Business Partner or IBM Marketing Representative for assistance with your specific configuration requirements.
FAStT200 Storage Server
(P/N 35421RU)
FAStT Host
Adapter1
(D)
FAStT Host
Adapter1
(D)
FAStT Host
Adapter1
(D)
FAStT200 HA Storage Server
(P/N 35422RU)
FAStT EXP500
P
S
FAStT Host
Adapter1
(D)
FAStT Host
Adapter1
(D)
(D or E)
(D or E)
FAStT200 HA Storage Server
(P/N 35422RU)
FAStT EXP500
P
S
(D or E)
FAStT Host
Adapter1
(D or E)
(D)
FAStT Host
Adapter1
(D)
(E)
Switch/Hub
Switch/Hub2
FAStT200 HA Storage Server
(P/N 35422RU)
FAStT Host
Adapter1
P
P
(D or E)
FAStT EXP500
(D or E)
FAStT EXP500
S
(D or E)
(D)
(D or E)
S
(D or E)
FAStT Host
Adapter1
FAStT200 HA Storage Server
(P/N 35422RU)
Switch/Hub
FAStT EXP500
(D)
P
P
FAStT EXP500
(D or E)
FAStT Host
Adapter1
S
(D or E)
FAStT Host
Adapter1
(D)
Switch/Hub
(D or E)
1. FAStT Host Adapter (P/N 00N6881) supports short-wave connections only.
2. Buffering the long-wave optic cable expanse with a second switch or hub at the remote storage
location is required to requalify the signal. A managed hub supports only one long-wave GBIC.
• P = primary path, S = secondary (redundant) path
• Shaded boxes represent separate hosts.
• Cable groups are represented by letters in parenthesis.
• Maximum of 30 external storage HDDs are supported for optimum performance (up to 10 in the
storage server with the remainder in expansion units).
• The number of servers that can be used in configurations with managed hubs or Fibre Channel
switches are dependent on partitioning restrictions of the management system or cluster
software.
• An optional short- or long-wave GBIC is required for all FAStT200 storage server and
FAStT EXP500 storage connections. GBICs are not depicted in these diagrams.
• Other Fibre Channel devices may not require optional GBICs. For specific requirements, see
the Fibre Device Ports Reference.
Updated 03/22/01
S
(D or E)
(D or E)
Cable Group D (short-wave Fibre Channel)
03K9306 - Netfinity Fibre Channel 5M Cable
03K9305 - Netfinity Fibre Channel 25M Cable
Customer supplied short-wave cable of up to 500M (0.31 miles)
Cable Group E (long-wave Fibre Channel)
Customer supplied long-wave cable of up to 10KM 6.2 miles)
GBIC
03K9308 - Netfinity Fibre Channel Short-Wave GBIC
03K9307 - Netfinity Fibre Channel Long-Wave GBIC
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
121
Fibre / Fibre Configuration Examples (FAStT500)
Note: The following sample configurations are for illustration only and may not be suitable
for any specific customer installation. Contact your IBM Business Partner or IBM Marketing
Representative for assistance with your specific configuration requirements.
FAStT500 Storage Server
(P/N 35521RU)
(D)
FAStT Host
Adapter1
(D or E)
FAStT EXP500
P
S
(D or E)
(D)
FAStT Host
Adapter1
FAStT500 Storage Server
(P/N 35521RU)
(D or E)
FAStT EXP500
P
FAStT Host
Adapter1
S
(D)
(D or E)
(D)
FAStT Host
Adapter1
FAStT500 Storage Server
(P/N 35521RU)
(D or E)
FAStT EXP500
P
S
Switch/Hub
(D)
FAStT Host
Adapter1
(E)
(D or E)
(D or E)
FAStT500 Storage Server
(P/N 35521RU)
Switch/Hub
(D or E)
FAStT EXP500
P
S
P
FAStT EXP500
Switch/Hub2
(D or E)
(D or E)
S
FAStT Host
Adapter1
(D)
(D or E)
Switch/Hub
(D or E)
FAStT Host
Adapter1
(D or E)
FAStT EXP500
P
S
P
(D)
FAStT500 Storage Server
(P/N 35521RU)
FAStT EXP500
(D or E)
FAStT EXP500
(D or E)
S
P
FAStT Host
Adapter1
Switch/Hub
FAStT Host
Adapter1
(D)
(D or E)
(D or E)
1. FAStT Host Adapter (P/N 00N6881) supports shortwave connections only.
2. Buffering the long-wave optic cable expanse with a second switch or hub at the remote storage
location is required to requalify the signal.
• P = Primary path, S = Secondary/Redundant path
• Shaded boxes represent separate hosts.
• Cable groups are represented by letters in parenthesis.
• Maximum of 220 external storage HDDs are supported through 11 enclosures in each cable pair.
• The number of servers that can be used in configurations with managed hubs or Fibre Channel
switches are dependent on partitioning restrictions of the management system or cluster
software.
• An optional short- or long-wave GBIC is required for all FAStT500 storage server and
FAStT EXP500 storage connections. GBICs are not depicted in these diagrams.
• Other Fibre Channel devices may not require optional GBICs. For specific requirements, see
the Fibre Device Ports Reference.
122
S
(D or E)
Cable Group D (Short-Wave Fibre)
03K9306 - Netfinity Fibre Channel 5M Cable
03K9305 - Netfinity Fibre Channel 25M Cable
Customer supplied short-wave cable of up to 500M (0.31 miles)
Cable Group E (long-wave Fibre Channel)
Customer supplied long-wave cable of up to 10KM
(6.2 miles)
GBIC
03K9308 - Netfinity Fibre Channel Short-Wave GBIC
03K9307 - Netfinity Fibre Channel Long-Wave GBIC
NETFINITY FIBRE
ARRAY SOLUTIONS
IBM xSeries and Netfinity Fibre Array Solutions
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business
Partner or IBM Marketing Representative for assistance with your specific configuration requirements
High-speed, single-node xSeries and Netfinity Fibre Channel storage configuration offering
performance, bandwidth & capacity
Netfinity Rack (P/N 9306900)
Netfinity Rack (P/N 9306900)
Tape Library Support
3502R14
Monitor Compartment
(P/N 94G7444)
Short- Wave
Fibre Cable
(Cable Group D)
G74 Monitor
(P/N 65474AN) (10U)
Short Wave GBIC
(P/N 03K9308
Four Port Console Selector Switch
(P/N 09N4290)
Netfinity FAStT500 Storage
Server (P/N 35521RU)
- Height (4U)
- Includes 19in Rack
Installation
Hardware
Keyboard Tray (P/N 28L4707) (2U)
Keyboard with TrackPoint
(P/N 28L3644)
Cable Selection
EXP500 - Cable Group D
FAStT Host Adapter
(P/N 00N6881)
Other Components
(Quantities will vary based
on specific configurations)
EXP500 Storage Expansion Unit
(P/N 35601RU)
- Height (3U)
- Up to 10 HDDs
- Cable Group D
(Up to 22 per 35521RU
FAStT500 Storage Server,
above 11 requires additional
Mini Hubs to be installed in the
35521RU Controller)
Server Node A
Supported Servers
xSeries 370 / Netfinity 8500R (8U)
xSeries 350 / Netfinity 6000R (4U)
Netfinity 7600 (8U)
Netfinity 7100 (8U)
xSeries 250 (8U)
xSeries 340 / Netfinity 4500R (3U)
xSeries 330 (1U)
xSeries 240 / Netfinity 5600 (5U)
xSeries 230 / Netfinity 5100 (5U)
Short-Wave
Fibre Cable
(Cable Group D)
UPS SU-1400RMB
(P/N 94G6674) (3U)
UPS SU-3000RMB
(P/N 94G6676) (3U)
UPS SU-3000RMB
(P/N 94G6676) (3U)
Connector Types
68-pin - High Density Connector
0.8mm - Very High Density Connection Interface (VHDCI)
Cable Group A (0.8mm to 0.8mm)
03K9310 - Netfinity 2M Ultra2 SCSI Cable
03K9311 - Netfinity 4.2M Ultra2 SCSI Cable
37L7101 - Netfinity 20M Ultra2 SCSI Cable
Cable Group D (Short-Wave Fibre)
36L9973 - Netfinity Fibre Channel 1M Cable
03K9306 - Netfinity Fibre Channel 5M Cable
03K9305 - Netfinity Fibre Channel 25M Cable
Customer supplied short-wave cable of up to 500m (0.31 miles)
Cable Group E (Long-Wave Fibre)
Customer supplied long-wave cable of up to 10km (6.2 miles)
GBIC
03K9308 - Netfinity Fibre Channel Short-Wave GBIC
03K9307 - Netfinity Fibre Channel Long-Wave GBIC
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
123
IBM xSeries and Netfinity Fibre Array Solutions
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner
or IBM Marketing Representative for assistance with your specific configuration requirements
High-speed, single-node xSeries and Netfinity Fibre Channel storage configuration with Microsoft
NT failover support and RAID redundancy for availability, performance and capacity
Netfinity Rack (P/N 9306900)
Netfinity Rack (P/N 9306900)
Tape Library Support
3502R14
Monitor Compartment
(P/N 94G7444)
G74 Monitor
(P/N 65474AN) (10U)
Four Port Console Selector Switch
(P/N 09N4290)
Short - Wave
Fibre Cable
(Cable Group D)
Short Wave GBIC
(P/N 03K9308
Keyboard Tray (P/N 28L4707) (2U)
Keyboard with TrackPoint
(P/N 28L3644)
Netfinity FAStT500 Storage
Server (P/N 35521RU)
- Height (4U)
- Includes 19in Rack
Installation
Hardware
Cable Selection
EXP500 - Cable Group D
FAStT Host Adapter
(P/N 00N6881)
FAStT Host Adapter
(P/N 00N6881)
Other Components
(Quantities will vary based
on specific configurations)
Rack
- Blank Filler Kits (P/N 94G6670)
- Power Cable (P/N 94G6667)
- Console Cable (P/N 94G7447)
- Side Panel Kit (P/N 94G6669)
- Rack Attachment Kit
(P/N 94G7446)
Netfinity EXP500 Storage
Expansion Unit (P/N 35601RU)
- Height (3U)
- Up to 10 HDDs
- Cable Group D
(Up to 22 per 35521RU
FAStT500 Storage Server,
above 11 requires additional
Mini Hubs to be installed in the
35521RU Controller)
Server Node A
Supported Servers
xSeries 370 / Netfinity 8500R (8U)
xSeries 350 / Netfinity 6000R (4U)
Netfinity 7600 (8U)
Netfinity 7100 (8U)
xSeries 250 (8U)
xSeries 340 / Netfinity 4500R (3U)
xSeries 330 (1U)
xSeries 240 / Netfinity 5600 (5U)
xSeries 230 / Netfinity 5100 (5U)
UPS SU-1400RMB
(P/N 94G6674) (3U)
Short - Wave
Fibre Cable
(Cable Group D)
Connector Types
68-pin - High Density Connector
0.8mm - Very High Density Connection Interface (VHDCI)
Cable Group A (0.8mm to 0.8mm)
03K9310 - Netfinity 2M Ultra2 SCSI Cable
03K9311 - Netfinity 4.2M Ultra2 SCSI Cable
37L7101 - Netfinity 20M Ultra2 SCSI Cable
UPS SU-3000RMB
(P/N 94G6676) (3U)
UPS SU-3000RMB
(P/N 94G6676) (3U)
Cable Group D (Short-Wave Fibre)
36L9973 - Netfinity Fibre Channel 1M Cable
03K9306 - Netfinity Fibre Channel 5M Cable
03K9305 - Netfinity Fibre Channel 25M Cable
Customer supplied short-wave cable of up to 500m (0.31 miles)
Cable Group E (Long-Wave Fibre)
Customer supplied long-wave cable of up to 10km (6.2 miles)
GBIC
03K9308 - Netfinity Fibre Channel Short-Wave GBIC
03K9307 - Netfinity Fibre Channel Long-Wave GBIC
124
High Availability and Scalable Cluster Solutions
xSeries 230 High Availability Cluster
E54 color monitor
xSeries 230
Ethernet
Adapter
HIGH AVAILABILITY
CLUSTERING
4-port console
connector switch
xSeries 230
Cluster Interconnect
Ethernet
Adapter
ServeRAID
4M Adapter
ServeRAID
4M Adapter
EXP3001
shared storage
(with rack-to-tower
conversion kit)
1. Configured as a single independent twintail SCSI bus for high availability.
New xSeries 230 cluster solution starts up quick and smart with secure operation of business-critical applications. IBM gives you an easy transition with this
complete, test-proven, high availability (HA) hardware and software configuration--it’s ready-to-run right out of the box.
These tower solutions leverage the latest xSeries 230 server platform with choices of Windows® network operating system software and preloaded cluster
middleware. Features include the following:
• Prepackaged for single part number ordering and customer cost savings
• Scaled for business growth
• Ready-to-run with cluster middleware and either Windows 2000 Advanced Server or NT 4.0 EE operating systems preloaded
• Test-proven high availability hardware and software for business-critical applications
• Flexibility to handle unique computing environments
• Fully redundant with failover protection and RAID-protected internal and external storage
North America order numbers: x230 HA Cluster - NT (P/N 25P1821), x230 HA Cluster - Windows 2000 (P/N 25P1822)
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
125
xSeries 230 High Availability Cluster
(P/N 25P1821 and 25P1822)1
Part Number
Qty
Usage
865861Y
xSeries 230, 1GHz, 128MB RAM
Server Nodes
2
cluster nodes, onboard ethernet for public network access
37L7204
IBM 9.1GB 10K-4 Ultra160 SCSI Hot-swap SL HDD
4
2 per node attached to integrated Ultra160 SCSI Controller
37L6080
IBM ServeRAID-4M Ultra160 SCSI Controller
2
1 per node for shared storage controller
06P3601
10/100 Ethernet Server Adapter
2
Clustering Heartbeat
Storage Subsystem
35311RU
IBM EXP300 External Storage Enclosure
1
1 EXP300 per ServeRAID pair, max of 14 Ultra160 HDDs
09N7296
Netfinity EXP300 Rack-to-Tower Conversion Kit
1
convert standard rack-mount device to tower
37L7205
IBM 18.2GB 10K-4 Ultra160 SCSI Hot-swap HDD
5
RAID 5 shared storage in EXP300
03K9310
Netfinity 2M Ultra2 SCSI Cable
1
server to EXP300 (EXP300 ships with one 2M cable)
1
Ethernet Crossover for interconnection between clustered
nodes
Cluster Interconnect
19K5788
Ethernet Cluster Interconnect Cable
6331N2N
E54 Color Monitor - 15in (13.7in viewable image size)
1
09N4290
Netfinity Console Server Selector Switch (4-port)
1
Monitor / Console
09N4293
7ft Console Cable Set
2
2446177
Solution Integration Charge
2
Cluster Bundle Publications Pack for xSeries 230
1
06P4610
Preloaded Software (specify option)
1 console set per node
Select Windows NT 4.0EE or Windows 2000 Advanced
Server
01N0985
Microsoft Windows NT Server 4.0EE with MSCS
1
NOS and Cluster Middleware preloaded
01N0986
Windows 2000 Advanced Server
1
NOS and Cluster Middleware preloaded
Recommended Options
19K4640
xSeries 1GHz/256KB Upgrade with Pentium III Processor
2
SMP for nodes
33L3123
IBM 128MB 133MHz SDRAM ECC RDIMM II
2
Memory upgrade
37L7205
IBM 18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
9
RAID 5 shared storage in EXP300
01K7209
Netfinity Advanced Systems Management PCI Adapter
1
1 per cluster
03K9309
Netfinity Advanced Systems Management Interconnect
1
1 included with PCI adapter, 1 option required for second
system
33L4618
PCI V90 56 Data/Fax Modem
2
communications (1 per node)
00N7990
40/80GB Internal DLT Tape Drive
1
tape back-up
94G3136
APC Smart-UPS 1400
1
1. P/N 25P1821 includes Windows NT EE as the operating system for this integrated tower solution. P/N 25P1822 uses Windows 2000 Advanced Server.
126
xSeries 340 High Availability Cluster
(Refer to xSeries 230 HA
Cluster diagram for basic
external cabling and HDD
configuration.)
HIGH AVAILABILITY
CLUSTERING
Keyboard Tray,
Keyboard, Flat Panel
Monitor and 4-port Console
Connector Switch are all
installed in the same 3U
space above)
EXP300 (3U)
xSeries 340 (3U)
xSeries 340 (3U)
UPS 3000 (3U)1
NetBAY22 Rack
1. Either a UPS 3000 or PDU can be installed. Power options are not shipped standard with the cluster
bundle.
New xSeries 340 cluster solution starts up quick and smart with secure operation of business-critical applications. IBM gives you an easy transition with this
complete, test-proven, high availability (HA) hardware and software configuration--it’s ready-to-run right out of the box.
These rack solutions leverage the latest xSeries 340 server platform with choices of Windows network operating system software and preloaded cluster middleware.
Features include the following:
• Prepackaged for single part number ordering and customer cost savings
• Scaled for business growth
• Ready-to-run with cluster middleware and either Windows 2000 Advanced Server or NT 4.0 EE operating systems preloaded
• Test-proven high availability hardware and software for business-critical applications
• Flexibility to handle unique computing environments
• Fully redundant with failover protection and RAID-protected internal and external storage
North America order numbers: x340 HA Cluster - NT (P/N 25P1823), x340 HA Cluster - Windows 2000 (P/N 25P1824)
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
127
xSeries 340 High Availability Cluster
(P/N 25P1823 and 25P1824)1
Part Number
Qty
Usage
86566RY
xSeries 340, 1GHz, 128MB RAM
Server Nodes
2
cluster nodes, onboard ethernet for public network access
37L7204
IBM 9.1GB 10K-4 Ultra160 SCSI Hot-swap SL HDD
4
2 per node attached to integrated Ultra160 SCSI Controller
37L6080
IBM ServeRAID-4M Ultra160 SCSI Controller
2
1 per node for shared storage controller
06P3601
10/100 Ethernet Server Adapter
2
Clustering Heartbeat
Storage Subsystem
35311RU
IBM EXP300 External Storage Enclosure
1
1 EXP300 per ServeRAID pair, max of 14 Ultra160 HDDs
37L7205
IBM 18.2GB 10K-4 Ultra160 SCSI Hot-swap SL HDD
5
RAID 5 shared storage in EXP300
03K9310
Netfinity 2M Ultra2 SCSI Cable
1
server to EXP300 (EXP300 ships with one 2M cable)
22U rack cabinet
Rack, Monitor, Console
9306200
NetBAY22 Rack
1
9511AG1
T54A Flat Panel Monitor
1
37L6888
Flat Panel Monitor Rack Kit
1
28L4707
Netfinity Rack Keyboard Tray
1
28L3644
Space Saver Keyboard
1
09N4290
Netfinity Console Server Selector Switch (4-port)
1
09N4293
7ft Console Cable Set
2
94G6670
Blank Filler Panel Kit
1
2446177
Solution Integration Charge
2
06P4610
Cluster Bundle Publications Pack for xSeries 230
1
1 console set per node
Cluster Interconnect
19K5788
Ethernet Cluster Interconnect Cable
1
Preloaded Software (specify option)
Ethernet Crossover for interconnection between clustered
nodes
Select Windows NT 4.0EE or Windows 2000 Advanced
Server
01N0985
Microsoft Windows NT Server 4.0EE with MSCS
1
NOS and Cluster Middleware preloaded
01N0986
Windows 2000 Advanced Server
1
NOS and Cluster Middleware preloaded
Recommended Options
19K4640
xSeries 1GHz/256KB Upgrade with Pentium III Processor
2
SMP for nodes
33L3123
IBM 128MB 133MHz SDRAM ECC RDIMM II
2
Memory upgrade
37L7205
IBM 18.2GB 10K-4 Ultra160 SCSI Hot-swap SL HDD
9
RAID 5 shared storage in EXP300
01K7209
Netfinity Advanced Systems Management PCI Adapter
1
1 per cluster
03K9309
Netfinity Advanced Systems Management Interconnect
1
1 included with PCI adapter, 1 option required for second
system
33L4618
PCI V90 56 Data/Fax Modem
2
communications (1 per node)
00N7990
40/80GB Internal DLT Tape Drive
1
tape back-up
94G6676
APC Smart-UPS 3000RMB
1
37L6866
NetBAY Rack PDU
2
1. P/N 25P1823 includes Windows NT EE as the operating system for this integrated rack solution. P/N 25P1824 uses Windows 2000 Advanced Server.
128
IBM Datacenter Solutions
IBM's new Datacenter Solution Program is a comprehensive set of product and service offerings intended to
deliver true enterprise computing solutions based on the Microsoft Windows 2000 Datacenter Server operating
system. The Windows 2000 Datacenter Server product runs on the new xSeries 370 rack-mounted server, which
offers up to 8-way processing, up to 32GB of memory, Fibre Channel and SCSI storage, and 12 PCI slots. The
Datacenter Solution can be ordered in one- and two-node configurations from the bundles shown here, and in
three- and four-node configurations by ordering additional nodes. The bundles illustrated here are base
configurations that can be expanded to meet your needs. The IBM Datacenter Solution includes not only
Microsoft-certified hardware, but also the Windows Datacenter Server operating system preloaded and a set of
required services. In addition, a wide variety of optional services are available from IBM to meet your
specifications.
In addition to the information on the following pages, the IBM Datacenter Solution Program includes the following
software and required services. The services products must be ordered separately. A complete Solutions
Assurance review will be conducted by IBM to ensure that the configuration being ordered is complete.
Software
DATACENTER SOLUTIONS
Microsoft Windows 2000 Datacenter Server, licensed for up to 8 CPU's
(Client Access Licenses to be purchased separately)
IBM Director 2.2
IBM Director Universal Management Services
Norton AntiVirus Corporate Edition
APC UPS Software
Required IBM Services
Warranty service upgrade (24x7x4 hour response)
Factory installation and on-site setup
Advanced Support for Mission Critical Systems
Optional IBM Services
High Availability Services1 (including up to 99.99% availability guarantee in the US)
xSeries 99.9% High Availability Guarantee outside of the US
Warranty service upgrade (24x7x2 hour response)
Operational Support Services--electronic systems management, account advocate, and more
Testing services--proof of concept, assessment, design, and planning
Business Continuity and Recovery Services
Custom services for unique requirements
1. The High Availability Services for Business Critical Systems offering for an availability guarantee is an optional service and is only offered for eligible xSeries environments at this time. IBM
reserves the right to change the terms and conditions of the program at any time, without notice. For more details, refer to www-1.ibm.com/services/its/us/highavail2.html.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
129
Datacenter Solutions
The product content described here is consistent worldwide; however, there may be some variance
in IBM part numbers outside of the US and Canada. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements
Second Node Ethernet
Adapter
Short-Wave GBICs
(P/N 03K9308)
Quantity:
2 + (4 x (# EXP500’s-1))
Interconnect Link
(crossover cable included)
1 x Expansion
Card
(P/N 28L4454)
Additional 2GB
Required
FAStT EXP500 (P/N 3560-1RU)
- Height (3U)
- Ten HH Fibre HDD bays
- Requires a GBIC for each connection
- Includes 19in Rack Installation
Hardware
- Datacenter Solution bundles include a
quantity of two
10/100 Ethernet
(P/N 06P3601)2
FAStT Adapter
(P/N 00N6881)
Processors 3 x
(P/N 10K2166)
Short-Wave 5M Fibre Cable
(P/N 03K9305)
Quantity =
2 x( # EXP500 - 1)
Node 2
Short-Wave 5M Fibre Cable
(P/N 03K9305)
Quantity = 2
Four standard
mini hubs
FAStT500 Storage Server (P/N 3552-1RU)
- Height (4U)
- Includes 4 Mini Hubs
- Four optional Mini Hubs (P/N 00N6882)
may be added
- Requires a GBIC for each connection
- Includes 19in Rack Installation Hardware
FAStT Adapter
(P/N 00N6881)
Node 1
Mirrored
2 x Hot-Swap
HDDs
ServeRAID-4H
(P/N 37L6889)
Server Nodes 1 and 2
xSeries 370 (8681-3RX)
1. Not included in the bundled solutions.
2. Ethernet adapters are not included in the single
node bundle
Node 2
Short-Wave 5M Fibre Cable
(P/N 03K9305)
Quantity =
2 x # Nodes
Node 1
Rack A
FAStT500
Flat Panel Monitor
Keyboard
Console Switch
EXP500
EXP500
x370
x370
PDU (not included)
PDU (not included)
130
Short-Wave GBICs
(P/N 03K9308)
- Single Node - Qty 4
- Two Node - Qty 6
IBM Datacenter Solution - Single Node (P/N 21P9961)
Bundle
(P/N
21P9961)
Components
Part Number
IBM Datacenter Solution - Single Node (P/N 21P9961) includes the part numbers and quantities
identified in this table. Required options must be purchased separately and are identified in the table
labeled “Required Options.” Additional options for IBM Datacenter Solutions are listed in the table
labeled “Selectable Options.” All final customer configurations and solutions require IBM Solution
Assurance Approval.
Description
Qty
Usage
Warranty Warranty
Service Service
24x7x4
24x7x2
hrs
hrs1
Part
Number
Part
Number
41L2742
41L2743
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Server Node 1
8681-3RX
19K4637
xSeries 370 900MHz/2MB, 512MB ECC,
OPEN, 40X, PCI (Rack 8U)
xSeries 370 900MHz/2MB Upgrade with
Pentium III Xeon Processor
1
3
Total of 4 SMP processors per node
Enables cache line interleaving and requires
installation of matched RDIMM pairs
Provides NOS mirroring on internal HDDs
Redundant paths to external storage subsystems
28L4454
Netfinity 8500R Memory Expansion Card
1
37L6889
00N6881
ServeRAID-4H Ultra160 SCSI Controller
Netfinity FAStT Host Adapter
1
2
35521RU
FAStT500 Storage Server
1
Provides for redundant paths from the server to the storage
unit
41L2768
41L2769
35601RU
FAStT EXP500 Storage Expansion Unit
2
HDDs should be added in matched pairs
41L2766
41L2767
N/A
N/A
N/A
N/A
1
30L9183
N/A
1
N/A
N/A
41L2762
N/A
41L2763
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
1
1
4
N/A
N/A
N/A
N/A
N/A
N/A
Storage Subsystems
Storage Cables
Calculations assume no switches are installed
03K9306
Netfinity Fibre Channel 5M Cable
6
03K9308
Netfinity Fibre Channel Short-Wave GBIC
10
Redundant Paths: Nodes - Storage Server EXP500
Redundant Paths: (2 x # Nodes + 4)
+4 x (# EXP500’s - 1)
Other Non-Rack
9511AG1
28L3644
T54A TFT LCD Color Monitor
(306mm x 230mm, 15in Viewable Image
Size), Stealth black
Space Saver II Keyboard
930842P
94G6670
Netfinity Enterprise Rack
Blank Filler Panel Kit
1
3
28L4707
Netfinity Rack Keyboard Tray
1
37L6888
Netfinity Flat Panel Monitor Rack Mount Kit II
1
09N4290
NetBAY 1x4 Console Switch
1
94G7447
NetBAY Console Cable Set 12ft (3.66m)
1
94G7448
Power Cable Type C12 (3.7m, 12ft)
6
22P4745
OS Preload Kit / Ship Group
Fills empty front panel space to control air flow
Supports Flat Panel Monitor with Kit 37L6888 and
stowage of Keyboard 28L3644 in a ready-to-use
position.
Required for installing flat panel monitor in
keyboard tray 28L4707
Attaches up to 4 nodes to a single monitor,
keyboard and mouse.
Attaches each node to a Console Server Selector
Switch
Provides IEC 320-C13 (Device) to IEC 320-C14
(Power Unit) power cord
DATACENTER SOLUTIONS
Rack and Related Components
Publications and Software
Services
06P7505
06P7514
06P7515
Image Load Fee
Enterprise Rack Prep Fee
Enterprise Rack Installation Fee
1. This Service offering is not available in all countries and is limited to selected areas (see Fax #8146 on 1-800-IBM-4FAX).
All final customer configurations and solutions require IBM Solution Assurance Approval.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
131
IBM Datacenter Solution - Two Node (P/N 21P9962)
Bundle
Warranty Warranty
IBM Datacenter Solution - Two Node (P/N 21P9962) includes the part numbers and quantities identified in
(P/N
Service Service
this table. Required options must be purchased separately and are identified in the table labeled “Required
21P9962) Options.” Additional options for IBM Datacenter Solutions are listed in the table labeled “Selectable Options.” 24x7x4
24x7x2
Components All final customer configurations and solutions require IBM Solution Assurance Approval.
hrs
hrs1
Part Number
Description
Qty/ Total
Usage
Part
Part
Node Qty
Number Number
Server Nodes 1 and 2
8681-3RX
19K4637
xSeries 370 900MHz/2MB, 512MB ECC,
OPEN, 40X, PCI (Rack 8U)
xSeries 370 900MHz/2MB Upgrade with
Pentium III Xeon Processor
1
2
3
6
28L4454
Netfinity 8500R Memory Expansion Card
1
2
37L6889
ServeRAID-4H Ultra160 SCSI Controller
1
2
00N6881
Netfinity FAStT Host Adapter
2
4
-
1
2
41L2742
41L2743
Total of 4 SMP processors per node
N/A
N/A
Enables cache line interleaving and requires
installation of matched RDIMM pairs.
Provides NOS mirroring on internal HDDs.
Redundant paths to external storage
subsystems
N/A
N/A
N/A
N/A
N/A
N/A
41L2768
41L2766
41L2769
41L2767
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Storage Subsystems
35521RU
35601RU
FAStT500 Storage Server
FAStT EXP500 Storage Expansion Unit
Storage Cables
Calculations assume no switches are
installed
Redundant Paths: Nodes - Storage Server EXP500
Redundant Paths: (2 x # Nodes + 4)
+4 x (# EXP500’s - 1)
03K9306
Netfinity Fibre Channel 5M Cable
-
8
03K9308
Netfinity Fibre Channel Short-Wave GBIC
-
12
19K5788
25ft Ethernet Crossover Cable
-
1
06P3601
10/100 Ethernet Server Adapter
1
2
-
1
30L9183
N/A
-
1
N/A
N/A
41L2762
41L2763
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Interconnect Components
Interconnects 2 nodes without an Ethernet
switch
Node to node interconnect
Other Non-Rack
9511AG1
28L3644
T54A TFT LCD Color Monitor (306mm x
230mm, 15in Viewable Image Size), Stealth
black
Space Saver II Keyboard
Rack and Related Components
930842P
Netfinity Enterprise Rack
-
1
94G6670
Blank Filler Panel Kit
-
2
28L4707
Netfinity Rack Keyboard Tray
-
1
37L6888
Netfinity Flat Panel Monitor Rack Mount Kit II
-
1
09N4290
NetBAY 1x4 Console Switch
-
1
94G7447
NetBAY Console Cable Set 12ft (3.66m)
1
2
94G7448
Power Cable Type C12 (3.7m, 12ft)
-
7
1
2
Fills empty front panel space to control air
flow
Supports Flat Panel Monitor with Kit 37L6888
and stowage of Keyboard 28L3644 in a
ready-to-use position.
Required for installing flat panel monitor in
keyboard tray 28L4707
Attaches up to 4 nodes to a single monitor,
keyboard and mouse.
Attaches each node to a Console Server
Selector Switch
Provides IEC 320-C13 (Device) to IEC 320C14 (Power Unit) power cord
Publications and Software
22P4745
OS Preload Kit / Ship Group
Services
06P7505
06P7514
Image Load Fee
Enterprise Rack Prep Fee
1
-
2
1
06P7515
Enterprise Rack Installation Fee
-
5
Quantity equals the number of racks
Quantity equals the number of major rack
components installed
1. This Service offering is not available in all countries and is limited to selected areas (see Fax #8146 on 1-800-IBM-4FAX).
All final customer configurations and solutions require IBM Solution Assurance Approval.
132
IBM Datacenter Solution - Required Options
Required
Options
Part Number
Warranty Warranty
Required Options provide alternative methods of meeting minimum memory and storage requirements.
Service
Customer requirements will vary; therefore, these options are configured and purchased separate from the Service
base solution bundle. All final customer configurations and solutions require IBM Solution Assurance
24x7x4
24x7x2
Approval.
hrs
hrs1
Description
Qty/ Node
Select one of the three memory options per node.
33L3056
Netfinity 1GB SDRAM ECC RDIM II
20L0249
Netfinity 512MB SDRAM ECC RDIMM II
33L3149
512MB 100MHz ECC SDRAM RDIMM
Select one of the two internal HDD options per node
37L7203
36.4GB Ultra160 SCSI Hot-Swap SL HDD
36.4GB 10K-4 Ultra160 SCSI Hot-Swap SL
37L7206
HDD
Usage
RDIMMs must be added in matched pairs within each node.
A minimum of 2GB must be added to each bundled node.
2 + 2N
Minimum of 2
4 + 2N
Minimum of 4
4 + 2N
Minimum of 4
Two HDDs must be installed in each node
2
Internal HDDs for NOS installation
2
Internal HDDs for NOS installation
A minimum of 2 HDDs must be installed, one in each
FAStT500 Storage Expansion Unit. Additional HDDs must be
installed in multiples of 2.
06P5707
Netfinity 18.2GB 15Krpm FC Hot-Swap HDD
Install in EXP500s
19K0652
18.2GB 10K-4 FC Hot-Swap HDD
Install in EXP500s
19K0653
36.4GB 10K-4 FC Hot-Swap HDD
Install in EXP500s
19K0654
73.4GB 10K-4 FC Hot-Swap HDD
Install in EXP500s
Select one of the two Warrany Services per bundle
Use the above applicable P/Ns with the right
24X7X4 option
quantity
Use the above applicable P/Ns with the right
24X7X2 option
quantity
Part
Number
Part
Number
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Select F/C HDD options (multiple of 2) per bundle
1. This Service offering is not available in all countries and is limited to selected areas (see Fax #8146 on 1-800-IBM-4FAX).
IBM Datacenter Solution - Selectable
Options
Selectable Selectable options are not required but are compatible for use with IBM Datacenter bundles. A Warranty Warranty Enterprise
Options comprehensive list of supported options can be found at www.developer.ibm.com/welcome/
Service Service
Rack
netfinity, under ‘NEWS’ select ‘Solutions Library,’ perform a search for ‘Microsoft,’ click on
24x7x2 Assembly
‘Windows 2000 Datacenter Server.’ All final customer configurations and solutions require IBM 24x7x4
hrs
hrs1
Fee
Solution Assurance Approval.
Part
Number
Description
Usage
Part
Number
Part
Number
Part
Number
21P99602
Datacenter Server Bundle-Additional node
41L2743
21P3342
19K4637
N/A
N/A
N/A
10K2337
Netfinity Mezzanine Expansion Kit
10K2335
Netfinity 4X Accelerator Filter
Preloaded xSeries 370 for nodes 3 and 4.
xSeries 370 supports up to 8 SMP processors.
Installation of 5 or more requires Filter and
Expansion Kits (P/N 10K2335 and 10K2337)
Required for installation of processors
5 through 8. Requires Filter (P/N 10K2335)
Required when installing Mezzanine Expansion
Kit (P/N 10K2337)
41L2742
xSeries 370 900MHz/2MB Upgrade with
Pentium III Xeon Processor
00N6881
35521RU
35601RU
36L9973
03K9306
03K9308
2109S08
09L5403
N/A
41L2768
41L2766
N/A
N/A
N/A
Standard
N/A
N/A
41L2769
41L2767
N/A
N/A
N/A
N/A
N/A
N/A
21P3342
21P3342
N/A
N/A
N/A
21P3342
N/A
N/A
N/A
21P3342
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
06P3701
Netfinity FAStT Host Adapter
FAStT500 Storage Server
FAStT500 Storage Expansion Unit
Netfinity Fibre Channel 1M Cable
Netfinity Fibre Channel 5M Cable
Netfinity Fibre Channel Short-Wave GBIC
SAN Fibre Channel Switch, 8-port
SAN Switch Redundant Power Supply
SAN Data Gateway Router UltraSCSI LVD
Port
ServeRAID-4H Ultra160 SCSI Controller
10/100 Ethernet Server Adapter
Token-Ring 16/4 PCI Adapter 2 with Wake
on LAN
Gigabit Ethernet SX Server Adapter (fiber)
31L3820
Fast Ethernet on STP Adapter 2.5m Cable
N/A
N/A
N/A
2108R3L
37L6889
06P3601
34L0701
Updated 03/22/01
Attachment from ethernet adapter to ethernet
switch
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
133
DATACENTER SOLUTIONS
All final customer configurations and solutions require IBM Solution Assurance Approval.
34L0301
Netfinity Gigabit Ethernet SX Adapter
31L3820
Fast Ethernet on STP Adapter 2.5m Cable
930842P
930842X
Netfinity Enterprise Rack
Netfinity Enterprise Expansion Cabinet
94G7448
Power Cable Type C12 (3.7m, 12ft)
94G7450
37L6861
200-240V Power Distribution Unit
APC Smart-UPS 5000RMB
DLT Tape Library - Rack (includes SCSI
Adapter)
Cisco CAT2912 12-port Ethernet Switch/
Enterprise Edition
25ft Ethernet Crossover Cable
3502R14
06P38823
19K5788
3
N/A
Attachment from ethernet adapter to ethernet
switch
N/A
N/A
N/A
N/A
41L2762
41L2762
41L2763
41L2763
21P3341
21P3341
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
21P3342
41L2747
N/A
21P3342
Used for interconnect of heartbeat
N/A
N/A
21P3342
Interconnects 2 nodes without an ethernet switch
N/A
N/A
N/A
Provides IEC 320-C13 (Device) to IEC 320-C14
(Power Unit) power cord
1. This Service offering is not available in all countries and is limited to selected areas (see Fax #8146 on 1-800-IBM-4FAX).
All final customer configurations and solutions require IBM Solution Assurance Approval.
2. Memory from the Required Options table must be ordered. Additional hardware may also be required, such as an ethernet switch and cables.
3. There may be some variance in IBM part numbers outside of the US and Canada.
134
N/A
IBM Netfinity NetBAY3/NetBAY3E™
Stackable Enclosures
Sample
Configuration
Netfinity 7600
Communications
Installation Guidelines:
1) Locate power units with line cords in the bottom enclosure.
2) Install components starting from the bottom; start with the heaviest device.
3) If nothing is installed in the enclosure, attach the rear blank panel for stability.
36in
914mm
NetBAY3
36
in.
36in
36in
19in
UPS
6in
3.2 ft2
36in
914mm
19in x 24in
483mm x 610mm
26in
Front
6in
20in
152mm
508mm
Operational clearance
(1.7ft X 3ft = 5ft2)
(508mm x 914mm = 0.46m2)
(7.6ft X 8.2ft = 62.3ft2
(2316mm x 2499mm = 5.79m2)
Service clearance
Supported Devices
NetBAY3 NetBAY3E Size (U)
36in
914mm
Max/Enclosure
Max/Stack
1
Netfinity 7600
Netfinity 7100
xSeries 250
xSeries 370 / Netfinity 8500R2
Expansion3
Netfinity EXP300
FAStT200 Storage Server
FAStT200 HA Storage Server
FAStT EXP5004
Tape Units3
NetMEDIA 3551001
Power3
APC Smart-UPS 1400RMB
APC Smart-UPS 3000RMB
100-120V PDU
200-240V PDU
NetBAY Server Dual Cord PDU
NetBAY Rack PDU
Communications3
X
X
X
-
X
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1
1
1
1
X
X
X
X
X
X
X
X
3
3
3
3
1
1
1
1
3
1
1
2
X
X
3
1
3
X
X
X
X
X
X
X
X
X
X
X
X
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
IBM NETFINITY NETBAY3
STACKABLE ENCLOSURE
Servers
8230 T-R Controlled Access Unit
X
X
2
1
3
8235 Dial-in Access to LAN
X
X
1
3
9
8285 ATM Switch
X
X
3
1
3
1. Netfinity 7600 systems are rack mountable and ship without a keyboard. In order to be utilized with a NetBAY3 (or in any tower configuration), optional
8Ux28D Rack-to-Tower Kit (P/N 28L4705) must be installed.
2. xSeries 370 / Netfinity 8500R systems are rack mountable and ship without a keyboard. In order to be utilized with a NetBAY3 (or in any tower
configuration), optional Rack-to-Tower Kit (P/N 28L4705) must be installed.
3. NetBAY3 and NetBAY3E do not contain a top cover and require a supported server as the top component in a stack.
4. FAStT EXP500 requires a FAStT200 or FAStT200 HA Storage Server in a NetBAY3 or NetBAY3E configuration.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
135
IBM Netfinity NetBAY3/3E Stackable Enclosure
Tower Models
Single NetBay and Casters
Max Configurations
Monitor/
Keyboard1
Add Options
Add Options
xSeries 250,
Netfinity 71004
NetBAY3
NetBAY3
NetBAY3
Monitor/
Keyboard1
xSeries 250,
Netfinity 7100
NetBAY3
(P/N 10L6912)
- and Casters
(P/N 10L6913)
xSeries 250,
Netfinity 7100
Up to Two Additional
NetBAY3s
(P/N 10L6912)
NetBAY3
xSeries 250,
Netfinity 7100
Netfinity 7600
Glide Feet
Glide Feet
Rack Models
xSeries 250,
Netfinity 7100,
Netfinity 7600
Monitor/
Keyboard1
Monitor/
Keyboard1
IBM 8Ux24D
Rack-to-Tower Kit2
(P/N 37L6860)
xSeries 250
Netfinity 7100,
Netfinity 76004
NetBAY3
xSeries 250,
Netfinity 7100,
Netfinity 7600
Up to Two Additional
NetBAY3s
(P/N 10L6912)
NetBAY3
NetBAY3
NetBAY3
Caster Stabilizer
Caster Stabilizer
xSeries 370 /
Netfinity 8500R
IBM 8Ux28D
xSeries 370 /
Netfinity 8500R
Rack-to-Tower Kit3
P/N (28L4705)
Monitor/
Keyboard1
Up to Two Additional
NetBAY3Es
(P/N 36L9701)
xSeries 370 /
Netfinity 8500R4
NetBAY3E
NetBAY3E
Caster Stabilizer
1. xSeries / Netfinity rack models ship without a keyboard or mouse. Those supported for stacking on a NetBAY3 or NetBAY3E must have a rack-totower kit installed.
2. IBM 8Ux24D Rack-to-Tower Kit (P/N 37L6860) includes casters, caster stabilizer, glide feet and a single NetBAY3.
Either NetBAY3 or the glide feet may be utilized but not both.
3. IBM 8Ux28D Rack-to-Tower Kit (P/N 28L4705) includes casters, caster stabilizer, and a single NetBAY3E.
4. xSeries 250, Netfinity 7100, Netfinity 7600 and xSeries 370 / Netfinity 8500R are not supported for installation with three empty NetBAY enclosures
without a caster stabilizer.
136
NetBAY3E
NetBAY3E
Caster Stabilizer
IBM Enterprise Rack
930842P/X/S/E
IBM NetBAY22 Rack
9306200
IBM Netfinity Rack
9306900/910
IBM NETFINITY RACK CABINET
Rack Cabinet and Options
12in4
U
40
U
40
U
40
30
30
30
81.5in
79.5in
20
20
20
10
10
10
0
0
0
46.25in
IBM Netfinity Rack1
Machine Type / Model
EIA Capacity6
Sidewall Compartments
Front Stabilizers
IBM Netfinity
NetBAY225
IBM Netfinity Enterprise
Rack
IBM NetBAY Enterprise
Rack
9306900
9306910
9306200
930842P
930842X
930842S
930842E
42U
42U
22U
42U
42U
42U
42U
4
4
2
4
4
4
4
Std
Std
Std
Std
Std
Std
Std
Side Stabilizers
Std
Std
NR
NR
NR
NR
NR
Casters
Std
Std
Std
Std
Std
Std
Std
Leveling Feet
Std
Std
Std
Std
Std
Std
Std
Side Covers
94G6669
Std
Std
Std
NR
Std
NR
Std
No
Std
Std
Std
No
No
06P6010
Std
No
06P6048
06P6048
Std
Std
Glass Front Door
Perforated Front Door2, 7
Empty Weight
276lbs
276lbs
182lbs
575lbs
516lbs
575lbs
516lbs
Max Load (Moveable)
824lbs
824lbs
746lbs
1470lbs
1470lbs
1470lbs
1470lbs
Max Load (Stationary)
1424lbs
1424lbs
746lbs
1470lbs
1470lbs
1470lbs
1470lbs
1100
1100
928lbs
2045lbs
1986lbs
2045lbs
1986lbs
1986lbs
Total Weight (Moveable)
1700
1700
928lbs
2045lbs
1986lbs
2045lbs
Rack Extension Kit1
Total Weight (Stationary)
36L9703
36L9703
36L9702
NR
NR
NR
NR
Rack Attachment Kit
94G74463
94G74463
NA
NR
Std
NR
Std
NR - Not Required
NA - Not Available
1. Rack Extension Kit adds 8in to rear of cabinet for cable management, recommended for systems greater than 24in in depth.
2. Option kit for use with installed racks. Improves air flow, recommended for 1U servers.
3. Required to attach racks together to make a suite.
4. Minimum clearance to the ceiling.
5. Display and keyboard may be placed on top of the NetBAY22.
6. Conforms to EIA 310 - D Standard 19in rack specification for a Type A cabinet with universal hole spacing.
7. Netfinity Direct special bid models are available with perforated front door (P/N 93084SA, 93084SB)
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
137
IBM Rack Mounted Units
8478
4
42
245/350
1/1
x2201
8645
4
42
245/350
1/1
1
x230/5100
8658
5
79
250/357
1/1
1
x230/5100 w/Pwr
Upgrade5
8658
5
79
315/450
1/35
1
x240/5600
8664
5
80
315/450
2/3
2
x250
8665
8
123
350/475
2/4
2
7100
8666
8
123
350/475
2/4
2
7600
8665
8
123
350/475
3/4
3
x3302
8654
1
29
140/200
1/1
1
1
x340/4500R
8656
3
61
270/415
1/2
1
1
x350/6000R
8682
3
76
365/525
1/3
1
x370/8500R3
8681
8
160
1015/1450
3/3
3
EXP300
35311RU
3
90
285/360
2/2
2
FAStT200
35421RU
3
56
275/390
2/2
2
Machine
Type /
Model
Size
(U)4
Approx
Weight
(lbs)
9ft IEC 320-C14
P/N 36L8886
14ft IEC 320-C14
P/N 36L8861
Number of P/S
and Line Cords
(basic/max
x2001
Description
6ft NEMA 5-15P
P/N 6952301
9ft NEMA 5-15P
P/N 6952300
14ft NEMA 5-15P
P/N 13F9961
9ft NEMA 6-15P
P/N 1838574
Power (Watts)
Typical /Max
(All cords to same
source)
Standard Power Cords6
Server System Units
1
1
3
3
Storage Units
FAStT200HA
35422RU
3
56
275/390
2/2
2
FAStT500 RAID
Controller
35521RU
4
76
140/200
2/2
2
FAStT EXP500
Storage Unit
35601RU
3
61
245/350
2/2
2
FC Switch 8-port
2109S08
1
17
-/200
1/2
1
FC Switch 16-port
2109S16
2
28
-/200
1/2
1
Tape Units
NetMEDIA
3551001
3
37
130/185
2/2
2
DLT Library
3502R14
4
70
-/135
1/1
1
Magstar 1 drive
3570C21
6
64
140/200
1/1
1
1
Magstar 2 drives
3570C22
6
64
140/200
2/2
2
2
1. Requires 4Ux20D Tower-to-Rack Kit (P/N 09N4300) to mount server unit into an EIA rack cabinet.
2. To provide adequate cooling, blank filler panel kit (P/N 94G6670) should be placed on the front of any unused rack space. If non-IBM racks are to
be used, assure that both front and rear doors offer a minimum of 48% open area uniformly distributed and in line with installed servers. A clearance
of 51 to 64mm (2 to 2.5in) must be maintained between the front of the door and the system unit’s front bezel. The rear door must maintain the same
or greater clearance. Nonrack or NetBAY3 installations are not supported.
3. x370 / 8500R requires installation of extension kit (P/N 36L9703 or 36L9702) when installed in a 9306-900, 910 or 9306-200, respectively, for
proper rear door clearance.
4. 1U= 1.75in (44.45mm).
5. One power supply standard; the Hot-Swap Power Supply Upgrade Kit (P/N 37L6881) allows one to three hot swap power supplies.
6. Optional rack power cords: P/N 94G6667 - 14ft NEMA 5-15P; P/N 94G7448 - 14ft IEC 320-C147.
General rack placement rules and other information:
- Locate heaviest components at the bottom of the rack (i.e., UPS, then servers or storage, etc.).
- Do not extend more than one component on side rails at a time.
- Maximum of three UPSs (including no more than two APC 5000 UPSs) per rack.
- Utilize sidewall compartments for mounting PDUs and console switches prior to using EIA space.
- When mounting components in a rack, consider user and service requirements.
- When selecting length of power, console and storage cables, consider extension of cable management arms and overall cable routing.
- BTUs = Watts x 3.41.
138
IBM NETFINITY RACK CABINET
Power Supply Options
Part Number
Usable with
110W
09L5403
2109
250W
33L3760
x230, 5100, x240, 5600, 7100,
x250, 7600
270W
37L6880
x340, 4500R, x350, 6000R
9ft NEMA 5-15P
P/N 6952300
6ft NEMA 6-15P
P/N 1838576
9ft IEC 320-C14
P/N 36L8886
Power Supply
6ft NEMA 5-15P
P/N 6952301
Standard Power
Cords
1
1
1
1
Rack Options
Part Number
Description
28L4707
Netfinity Rack Keyboard Tray
Information
Supports Keyboards in racks, also used with Flat Panel Monitor Rack Mount Kit II
01K1260
TrackPoint IV 104-key Black Keyboard
1U, includes TrackPoint IV, requires Rack Keyboard Tray (P/N 28L4707)
28L3644
Space Saver II Keyboard
1U, includes TrackPoint IV, requires Rack Keyboard Tray (P/N 28L4707)
94G7444
Monitor Compartment
633347N
E51 Color Monitor
6331N2N
E54 Color Monitor
9U, requires Monitor Compartment (P/N 94G7444)
9U, requires Monitor Compartment (P/N 94G7444)
6332J1N
E74 Color Monitor
10U, requires Monitor Compartment (P/N 94G7444)
37L6888
Flat Panel Monitor Rack Mount Kit II
9511AG1
T54A Flat Panel Color Monitor
Requires Rack Keyboard Tray (P/N 28L4707)
3U, requires Flat Panel Monitor Rack Mount Kit II (P/N 37L6888)
09N4290
NetBAY 1 x 4 Console Switch
1U, mounts in sidewall compartments, EIA space or Monitor Compartment; supports one
to four servers, one console
09N4291
NetBAY 2 x 8 Console Switch
1U, mounts in sidewall compartments, EIA space or Monitor Compartment; supports one
to eight servers, two consoles (only one console when installed in the Monitor
Compartment)
09N4293
Console Cable Set - 7ft
Connects servers to console switch
94G7447
Console Cable Set - 12ft
Connects servers to console switch
94G6666
100-120V Power Distribution Unit
37L6866
NetBAY Rack PDU (US)
1U, 100-240V, 15A, mounts in sidewall compartment or EIA space, seven IEC 320-C13
outlets, requires one NEMA L5-20R or L6-20R wall receptacle
37L6865
NetBAY Server Dual-cord PDU (US)
1U, 100-240V, 15/10A, mounts in sidewall compartment or EIA space, four IEC 320-C13
outlets, requires two NEMA L5-20R or L6-20R wall receptacles
37L6883
NetBAY 100-127V Single-phase Front-end PDU (US)
1U, 100-127V, shared 30A, mounts in sidewall compartment, three IEC 320-C19 outlets,
requires one NEMA L5-30R wall receptacle
37L6884
NetBAY 200-240V Single-phase Front-end PDU(US)
1U, 200-240V, shared 20A, mounts in sidewall compartment, three IEC 320-C19 outlets,
requires one NEMA L6-30R wall receptacle
37L6886
NetBAY 3-phase Front-end PDU (US)
1U, 380-415V, shared 30A, mounts in sidewall compartment, three IEC 320-C19 outlets,
requires one NEMA L21-30R wall receptacle
1U, 100-120V, 12A, mounts in sidewall compartment or EIA space, eight NEMA 5-15R
outlets, requires one L5-15R wall receptacle
94G6674
APC Smart-UPS 1400RMB
3U, 120V, 10A, six NEMA 5-15R outlets, requires one NEMA L5-15R wall receptacle
94G6676
APC Smart-UPS 3000RMB
3U, 120V, 23A, eight NEMA 5-15R outlets, requires one NEMA L5-30R wall receptacle
37L6861
APC Smart-UPS 5000RMB
5U, 208V, 22A, eight IEC 320-C13 outlets, two IEC 320-C19 outlets, reqires one NEMA
L6-30R wall receptacle; ships standard with two IEC 320-C19 to C20 cables to support
PDUs.
94G7446
Rack Attachment Kit
94G6669
Side Panel Kit
Used with 9306-900 only
Used with 9306-900 only
Used to attach 9306-900, 910 racks to make a suite
06P6010
Netfinity Perforated Door Kit
06P6048
Netfinity Enterprise Perforated Door Kit
94G6670
Blank Filler Panel Kit
Used with 9308-42P, 42X only
Consists of one 5U, one 3U, and two 1U blank filler panels
94G7442
Fixed Shelf
94G6667
Rack Power Cord -Type A14
IEC 320-C13 to NEMA 5-15P (14ft)
94G7448
Rack Power Cord -Type C12
IEC 320-C13 to IEC 320-C14 (14ft)
Updated 03/22/01
Supports up to 100lbs
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
139
D
K
H
C
E
M
K
A
F
F
B
J
C
G
L
Device
Extension
Front
I
9306-xxx
(inches)
9308-xxx
(inches)
Description
Box Footprint
A
23.5
25.5
Width of rack
B
34.5
43.5
Depth of rack (not including front stabilizer)
C
24
26
D
27.5
29.5
Width of Operational Clearance area
E
88.5
110
Depth of Operational Clearance area
Front and rear door clearance
Operational Clearance
F
2
2
Left/Right sides of rack to Operational Clearance area
G
30
36
Front of rack to Operational Clearance area
H
24
26
Rear of rack to Operational Clearance area
Service Clearance
140
I
95.5
97.5
Width of Service Clearance area
J
130.5
133.5
Depth of Service Clearance area
K
36
36
L
60
60
Front of rack to Service Clearance area
M
30
30
Rear of rack to Service Clearance area
Left/Right sides of rack to Service Clearance area
IBM NETFINITY RACK CABINET
Switch Arrangements
Tiering
Single Switch
Console
Console
Primary Switch
console
cable set
Secondary
Switch
Switch
console
cable set
Secondary
Switch
Up to 4 or 8 Servers
(depending on switch type)
Up to 64 Servers
(depending on switch type)
Keyboard/Pointer/Monitor & Switch ... all in 3U
Console Switch
• Mounts to rear flanges
• Shares 3U space with display, keyboard and tray
Keyboard Tray Components
• 28L4707 Netfinity Rack Keyboard Tray
• 37L6888 Netfinity Flat Panel Monitor Rack Mount Kit II
• 28L3644 Space Saver Keyboard
• 9511AG1 T54A TFT Color Monitor
Front
Keyboard Tray
Mounting Flanges
Slide-Out and Flip-Up
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
141
pr 2
In
cl
on
ve
r
nC
tio
n
68
In
te
rn
/50
-p
i
mi
na
-
-
1/0
-
12/24
1.1/2.2
Y
Y
-
1/1
3510020,
3551001
20/40
2.75/5.5
N
N/A
-
1/1
35100204,
35510013
10/20
1/2
Y
Y
-
1/0
133mm (5.25in) FH
20/40
1.5/3
N
Y
-
1/1
00N7990 40/80GB DLT Internal SCSI Tape Drive
16 Ultra2 LVD 133mm (5.25in) FH
40/80
6/10
N
N/A
-
1/1
00N8017 60/120GB 8mm M2 SCSI Tape Drive
16 Ultra2 LVD 133mm (5.25in) HH
60/120
12/24
N
N/A
-
113
00N8016 100/200GB LTO Tape Drive
16 Ultra2 LVD
100/200
15/30
N
N/A
-
1/1
35510013
24P2396 100/200GB LTO Half-High Tape Drive
00N8015 110/220GB Super DLT Internal SCSI Tape Drive
16 Ultra2 LVD 133mm (5.25in) HH 100/200
16 Ultra2 LVD 133mm (5.25in) FH 110/220
8/16
11/22
N
N
N/A
N/A
-
1/1
1/1
35510013
35510013
-
-
3510020,
3503B0X
-
-
-
3551001
1/1
5/1
1/1
3551001
-
-
m
Fo
r
MB
/se
-
Ma
xG
1/2
Description
SC
10/20
Pa
r
Te
r
c-
tiv
e
BNa
to
r
Fa
c
m
pr 2
/C
o
Na
tiv
e/c
o
m
bi
t)
ce
(
fa
HH: Half-High - approx height of 1.6in
SL: Slim-Line - approx height of 1in
FH: Full-High
SI
In
te
r
tN
um
be
r
LEGEND:
te
al
rI
Ca
nc
ble
l
s
Da
t
In a/C
clu le
de an
ing
d
Ca
Ex
r tr
tT
id
ap
ge
eE
s
nc
los
ur
es 1
Appendix A: Tape Drive Attributes
Tape Drives
20L0549 10/20GB TR5 Internal IDE Tape Drive
09N4041 12/24GB DDS/3 4mm Internal SCSI Tape Drive
00N7991 20/40GB DDS/4 4mm Internal Tape Drive
09N4042 10/20GB NS Internal SCSI Tape Drive
09N4040 20/40GB DLT Internal SCSI Tape Drive
89mm (3.5in) SL or
133mm (5.25in) HH
89mm (3.5in) HH
or 133mm (5.25in)
8
HH
89mm (3.5in) HH
16 Ultra2 LVD or 133mm (5.25in)
HH
89mm (3.5in) SL or
8
133mm (5.25in) HH
-
8
133mm (5.25in) FH
3510020,
3551001
3503BOX4,
3551001
3503B0X4,
35510013
35510013,
35100204
Associated Options
00N7956 68-pin External Multimode LVD/SE SCSI Terminator
36L9636 Netfinity Two-Drop Internal SCSI Cable5
10K2340 Media Bay Tray and LVD Cable Kit6
16 LVD/SE
Ext
-
-
Y
N
16
Int
-
-
Y
N
16 LVD
Int
-
-
Y
N
5/10
3/6
15/30
Y
N
Y
N
N
16-bit,
2-drop
16-bit
2-drop
Tape Autoloaders
3502108 DLT Tape Autoloader
00N7992 120/240GB DDS/4 Tape Autoloader
3600109 3600 Series 900GB/1.8TB LTO Tape Autoloader7
16
Desktop
280/560
16 Ultra2 LVD 133mm (5.25in) FH 120/240
16 Ultra2 LVD Tower or 6U Rack 900/1.8TB
-
External Tape Enclosures
3510020 External Half High SCSI Storage Enclosure8
-
-
N
N
8-bit or
16-bit
2 x 16bit, 4drop
N
16-bit
-
3551001
-
Y
-
-
1/1
-
Y
-
-
1/1
-
-
1/1
-
8, 16
Desktop
-
-
N
N
3551001 NetMEDIA Storage Expansion Unit EL9
16
Rack
-
-
Y
N
10L7113 NetMEDIA Systems Management Adapter10
3503B0X DLT External SCSI Enclosure11
16
16
Desktop
-
-
N
N
3502x14 DLT Tape Library
16
Desktop or Rack
490/980
3570C2x Magstar MP 3570 Tape Subsystem
Diff
6U Rack
100/300
16 Ultra2 LVD
Tower or Rack
External Tape Libraries12
3600xxx 3600 Series LTO Tape Libraries and Expander Module
142
5/10
2.2/6.6 or
7.0/15.0
2TB/4TB
15/30
Y
1. To determine cable requirements, note the tape drive’s SCSI interface, the appropriate SCSI controller from the system configurator section and the desired enclosure then refer to
Appendix D: Cables - Storage Units - Controllers. For installation of an internal tape drive into a server, see the appropriate system section.
2. Data compression typically provides a 2X improvement in capacity and transfer rate, but since data compression is affected by many factors, actual improvements may be more or less
than 2X.
3. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 3551001) requires replacement of the standard single-ended internal cables with one or more
(depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop multi-mode terminated cable. If the standard cables are used
for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
4. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).5.
5. Netfinity Two-Drop Internal SCSI Cable (P/N 36L9636) is a single-ended wide two-drop terminated cable.
6. Media Bay Tray and LVD Cable Kit (P/N 10K2340) includes an internal two-drop multi-mode terminated LVD SCSI cable.
7. If installed in a rack, a fixed shelf is required.
8. Provides a black desktop 5.25in half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self-termination or 68-pin
External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
9. NetMEDIA Storage Expansion Unit EL (P/N 3551001) is a black 3U, 19in rack or NetBAY3/3E mountable tape enclosure which includes two full high (FH) or four half-high (HH) extended
length 5.25” bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two
power cords are also included. Tip: The front rail clips will need to be reversed and screwed in from behind to secure the unit in a 930842x rack.
10. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a 3551001 to provide repeater function, LVDS interface, aggregate cable lengths up to 12M when attached
to an LVD SCSI controller, and auto-termination when the 3551001 is powered off. External connector is 0.8mm VHDCI.
11. Provides a black desktop DLT tape enclosure, with a 68-pin high density external connector. Requires termination by the tape drive or by installation of 68-pin External Multimode LVD/
SE SCSI Terminator (P/N 00N7956).
12. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
13. A combination data/clean cartridge cleans the drive each time the data cartridge is used.
Internal SCSI Cables and Optional SCSI Adapters
Most systems support the following SCSI adapters for use with tape. Consult the I/O Options table in the system sections for specific system support. Where tapes are supported internal
to the system, the cables which ship with the adapters are supported for tape attachment. Some restrictions may apply based on cable and tape type which are explained in the note
above.
Part Number
Description
Cable Description
02K3454
PCI Fast/Wide Ultra SCSI Adapter
Four-drop, single-ended terminated, 16-bit
19K4646
PCI Wide Ultra160 SCSI Adapter
Five-drop, multi-mode terminated
36L9636
Netfinity Two-Drop Internal SCSI Cable
Two-drop, single-ended terminated, 16-bit
10K2340
Media Bay Tray and LVD Cable Kit
Two-drop, multi-mode terminated
m)
ar
gC
nin
id
g
idg
r tr
Ca
1/14
1/14
-
1 2/2
1 2/2
-
1/3
1/3
-
3600220 3600 Series 2/4TB LTO Tape Library (Tower)
3600R20 3600 Series 2/4TB LTO Tape Library (Rack)
3600LXU 3600 Series 2-Drive, 20-Cartridge Expander Module4
LVD
LVD
LVD
Y
Y
Y
-
N
N
N
1/20
1/60
0/20
1 4/4
1 4/4
1 4/4
1/2
1/67
0/2
2TB/4TB 15/30
6TB/12TB7 15/30
2TB/4TB 15/30
3600109 3600 Series 900GB/1.8TB LTO Tape Autoloader5
LVD
Y
-
N
1/9
1
1/1
1/1
900/1.8TB 15/30
09N4048 3600 Series LTO Drive Upgrade Option6
LVD
Tower
5U Rack
5U Rack
Tower or 6U
Rack
-
N
Jumper
N
-
-
-
-
HVD
HVD
HVD
HVD
6U Rack
6U Rack
-
Y
Y
Y
-
(4.5M)
(4.5M)
(4.5M)
-
Y
Y
Y
N
1/20
1/20
-
Ca
ea
Cl
SC
r tr
Da
Y
Y
N
ta
SC
M68-M68 (3M)
M68-M68 (3M)
Jumper
SI
Ex
te
r
na
Co
lC
nt
ro
lle
ab
les
rs
es
s
In
cl
In
cl
(
de
d
In
clu
to
r
mi
na
Y
Y
N
Description
Fo
rm
Desktop
4U Rack
-
SI
SE
SE
SE
Pa
r
Te
r
Fa
ct
or
ce
In
te
r fa
tN
um
be
r
SCSI Interface and Cable Legend
M: Male - External
68: 16-bit, 68-pin High Density connector
0.8: 16-bit, 68-pin Very High Density Connection
Interface (VHDCI) 0.8mm connector
SE: Single-ended SCSI
HVD: High Voltage Differential SCSI
LVD: Low Voltage Differential SCSI
td
/m
ax
tri
d
Qt
ge
yo eM
ss
a
fd
gs
td
r iv
st
es
d/m
-s
a
x
Ma
td
/m
xG
ax
BNa
tiv
e/C
om
pr
MB
es
/ se
se
d
cNa
tiv
e/c
om
pr 1
Appendix B: Tape Library Attributes
DLT Tape Libraries
3502314 DLT Tape Library - Tower
3502R14 DLT Tape Library - Rack2
33L4979 DLT Library Drive Upgrade3
490/980
490/980
-
5/10
5/10
5/10
3600 Series Tape Libraries
-
8/16
100/300
100/300
-
7.0/15.0
7.0/15.0
7.0/15.0
Magstar Tape Systems
3570C21
3570C22
08L6517
08L6480
Magstar MP 3570 Tape Subsystem8
Magstar MP 3570 Tape Subsystem8
3570 Adapter Card Kit9
Second “C” Drive for C2110
Updated 03/22/01
1 2/2 1/2
1 2/2 2/213
-
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
143
TAPE ATTRIBUTES
Note: Tape support varies by system depending on internal bay availability, SCSI cabling type, number of cable drops, existence of a RAID controller and availability of a suitable external
enclosure. The following general rules should be followed.
a) Tapes are not supported for attachment to RAID controllers.
b) Single-ended (non-LVD) devices may be attached to internal multi-mode terminated cables. The entire SCSI bus will be limited to single-ended operation with a maximum bus speed of
Ultra-SCSI.
c) LVD devices attached to single-ended terminated cables will operate in single-ended mode with a maximum bus speed of Ultra-SCSI.
ax
Qt
yo
Ma
ss
fd
gs
td
r iv
st
es
d/m
-s
a
x
Ma
td
/m
xG
ax
BNa
tiv
e/C
om
pr
MB
es
/se
se
cd
Na
tiv
e/c
om
pr 1
td
/m
id
ge
r tr
Ca
ing
Cl
e
Ca
r
an
Da
tri
d
In
cl
rs
es
s
idg
r tr
SC
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ta
Ex
te
r
SI
C
Ca
on
tro
lle
ab
les
lC
na
ge
m)
cl
(
In
de
d
In
clu
to
r
mi
na
Te
r
Fa
ct
or
ce
nt
er
fa
SI
I
-
Fo
rm
Description
SC
Pa
r
tN
um
be
r
SCSI Interface and Cable Legend
M: Male - External
68: 16-bit, 68-pin High Density connector
0.8: 16-bit, 68-pin Very High Density Connection
Interface (VHDCI) 0.8mm connector
SE: Single-ended SCSI
HVD: High Voltage Differential SCSI
LVD: Low Voltage Differential SCSI
Magstar MP Media11
Magstar MP Fast Access Linear Tape Cartridge,
05H2462 B-format12
05H2463 Magstar MP Cleaning Cartridge
Magstar MP Fast Access Linear Tape Cartridge,
08L6187 C-format
-
-
-
-
1. Transfer rates are for single SCSI channel configurations. Tape libraries utilizing split library or dual host configurations may obtain higher rates. Data compression typically provides a 2X
improvement in capacity and transfer rate, but since data compression is affected by many factors, actual improvements may be more or less than 2X.
2. Includes Fixed Shelf (P/N 94G7442) for installation in an IBM rack or NetBAY22.
3. Upgrade 33L4979 is an additional drive for 3502x14 DLT Tape Libraries. Up to two drive upgrades may be installed for a maximum of three drives per 3502x14.
4. Supported only with the 3600 Series LTO Tape Library (rack) (P/N3600R20). Allow one additional EIA space when installing either one or two units to accommodate a filler plate for cable
routing.
5. If installed in a rack, a fixed shelf is required.
6. Install in second drive bay of 3600 Series LTOTtape Libraries or in open bays of 3600 Series 2-drive, 20-cartridge Expander Module to increase performance. Includes an LTO (Ultrium)
drive and a one-meter external LVD SCSI cable. Minimum of one required to support basic tape function fo each Expander Module.
7. Maximum configuration includes two 3600 Series 2-Drive, 20-Cartridge Expander Modules (P/N 3600LXU).
8. Includes rack mounting hardware and two power cords (120V and 250V). Models B22 and C22 include an additional two power cords.
9. Required for Dual Host or Split Library configurations with 3570B2x or 3570C2x containing two drives.
10. Required for either dual host or split library operation. Should be installed by qualified service personnel.
11. Magstar MP Media can be ordered by calling 888-IBM-MEDIA or 888-426-6334 in the US, Canada, or Puerto Rico.
12. B-format tape cartridges can be used in either Magstar MP 3570 Model B or C tape drives.
13. The two tape drives are daisy-chained on the same SCSI bus with an included 0.5m SCSI cable. Dual Host and Split Library configurations require 3570 Adapter Card Kit
(P/N 08L6517).
144
TAPE ATTRIBUTES
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
145
Appendix C: UPS Runtime Estimate (minutes)
Servers
# Pwr Cords Std/Max
Watts Load Max/Typ1
1/1
1/1
1/1
1/1
1/1
1/1
1/3
2/3
1/1
1/2
1/4
2/4
3/4
3/3
225/160
225/160
430/300
150/105
350/245
350/245
450/315
450/315
200/140
390/270
525/365
475/330
475/330
1450/1015
2/2
2/2
2/2
2/2
2/2
1/2
2/2
1/2
1/2
1/1
1/1
1/1
1/1
2/2
160/105
200/140
350/245
390/275
390/275
350/280
360/285
200/n/a
200/n/a
90/n/a
90/n/a
135/n/a
200/140
185/130
2, 3
Netfinity 1000
Netfinity 30002
Netfinity 3500 M202
Netfinity 4000R2
xSeries 2002
xSeries 2202
xSeries 230 / Netfinity 51002
xSeries 240 / Netfinity56002
xSeries 3302
xSeries 340 / Netfinity4500R2
Netfinity 6000R2
Netfinity 71002
Netfinity 76002
Netfinity 8500R2
Other Devices
Netfinity Fibre Channel RAID Controller Unit (3526)2
FAStT500 Storage Server (3552)2
FAStT EXP500 Storage Expansion Unit (3560)
2
FAStT200 Storage Server (35421RU)2
FAStT200 HA Storage Server (35422RU)2
Netfinity EXP200 Storage Expansion Unit (3530)2
EXP300 Storage Expansion Unit (3531)2
SAN Fibre Channel Switch, 8-port (2109S08)
SAN Fibre Channel Switch, 16-port (2109S16)
SAN Data Gateway Router (Diff.) (2108R3D)
SAN Data Gateway Router (SE) (2108R3S)
DLT Tape Autoloader and Library (3502)
Magstar MP 3570 Tape Subsystem (C2x)
NetMEDIA Storage Expansion Unit EL (3551)
1. This table represents general guidelines for selecting the appropriate UPS based on minimum and typical runtime estimates. A ‘maximum
configuration’ load will result in ‘minimum’ UPS runtime. ‘Typical’ loads are based on a production system running at approximately 70% of maximum
capacity. The ‘typical’ loads represent a more likely configuration and is a more likely estimate of runtime. Customer environments are unique and are
unlikely to be precisely represented by any of the specific entries in the table.
2. Power-Factor Corrected (PFC) power supply.
3. Netfinity 1000 (all models) are not available in Canada or Latin America. Netfinity 1000 (IDE models only) are available in the United States.
Tower
Rack Mounted
INT’L
P/N
SU700iNET
94G4073
SU1000iNET
94G4074
SU1400iNET
94G4075
SU2200iNET
94G4076
SU1400RMiB
94G6675
SUSU3000RMiB 5000RMiB
94G6677
37L6862
US
P/N
SU700NET
94G3134
SU1000NET
94G3135
SU1400NET
94G3136
Not
Available
SU1400RMB
94G6674
SU3000RMB
94G6676
SU5000RMB
37L6861
UPS Attributes
Communications Links to Servers
1
1
1
1
1
3
3
black
black
black
white
black
black
black
-
-
-
-
3U
3U
5U
220-240
(208)2
220-240 (208)2
10-Amp, IEC 320-C13
(Device) receptacles
4
4
4
8
4
8
8
16-Amp, IEC 320-C19 (PDU
94G7450) receptacles
-
-
-
1
-
1
2
C14
C14
C20
C20
C14
C20
TB5
120 (120)2
120 (120)2
120 (120)2
-
120 (120)2
120 (120)2
200-220
(208)2
Receptacles (NEMA 5-15R)
4
6
6
-
6
8
-
10-Amp, IEC 320-C13
(Device) receptacles
-
-
-
-
-
-
8
16-Amp, IEC 320-C19 (PDU
94G7450) receptacles
-
-
-
-
-
-
24
6ft, 5-15P
6ft, 5-15P
6ft, 5-15P
-
6ft, L5-15P
6ft, L5-30P
8ft, L6-30P
Color
EIA Height
International Models
50 or 60Hz, single phase, VAC:
Line Cord Receptacle (IEC 320-)
220-240 (208)2 220-240 (208)2 220-240 (208)2 220-240 (208)2
220-240
(xxx)2, 3
US Models
50 or 60Hz, single phase, VAC:
Line Cord Length, NEMA Plug
146
1. Data provided by APC.
2. How-to-Read example for 220-240(208): Input VAC is 220-240 as is the UPS output when electric service is active. When electric service is interrupted and the UPS is on battery the UPS
output is 208 VAC.
3. Battery output may be set to 220, 225, 230, or 240 VAC.
4. Two PDU jumper cables ship with the UPS for attachment from the IEC 320-C19 receptacles to Power Distribution Units (PDU) (P/N 94G7450).
5. SU-5000RMiB (P/N 37L6862) contains a Terminal Block (TB) for direct attachment to an electrical source by qualified personnel.
Total Configuration Runtime Estimator (Time in minutes)1
Tower
Rack Mount
SU-700iNET SU-1000iNET SU-1400iNET SU-2200iNET SU-1400RMiB
94G4073
94G4074
94G4075
94G4076
94G6675
SU-3000RMiB
94G6677
SU5000RMiB
37L6862
United States
Part Number
SU-700NET
94G3134
SU-1000NET
94G3135
SU-1400RMB
94G6674
SU-3000RMB
94G6676
SU-5000RMB
37L6861
Total Load
(Watts)
Runtime
Minutes
Runtime
Minutes
Runtime
Minutes
Runtime
Minutes
Runtime
Minutes
Runtime
Minutes
SU-1400NET Not Available
94G3136
Runtime
Minutes
200
22
38
62
130
45
104
240
250
17
28
43
104
34
84
200
300
12
22
34
85
25
70
166
350
9
18
29
71
22
58
145
400
7
14
23
65
18
52
125
450
5
12
20
52
15
45
110
500
-
11
18
43
13
38
97
550
-
9
16
38
11
35
87
600
-
8
13
34
10
31
76
650
-
7
12
31
9
29
68
700
-
6
11
28
8
26
63
750
-
-
10
25
8
24
59
800
-
-
9
23
7
22
55
850
-
-
8
21
7
20
51
900
-
-
7
19
6
18
47
43
950
-
-
6
18
5
17
1000
-
-
-
17
-
16
39
1100
-
-
-
15
-
14
34
1200
-
-
-
13
-
12
31
1300
-
-
-
11
-
10
28
25
1400
-
-
-
9
-
9
1500
-
-
-
9
-
8
22
1600
-
-
-
8
-
8
20
1700
-
-
-
-
-
7
18
1800
-
-
-
-
-
-
17
1900
-
-
-
-
-
-
14
2000
-
-
-
-
-
-
12
-
2100
-
-
-
-
-
2200
-
-
-
-
-
2300
-
-
-
-
-
2400
-
-
-
-
-
2500
-
-
-
-
-
2600
-
-
-
-
-
UPS RUNTIME
International
Part Number
11
11
-
10
10
-
9
9
2700
-
-
-
-
-
-
8
2800
-
-
-
-
-
-
8
1. Data provided by APC.
Steps:
1. Identify the devices contained in the configuration.
2. Sum the load (watts) of all devices in the configuration. Use either Maximum Load for minimum runtime or Typical Load for typical runtime.
3. Find the Total Configuration Load in the table above.
4. Select the most appropriate UPS model to achieve the desired runtime.
NOTE: If the Total Configuration Load is greater than the entries above, split the load across two or more UPS units.
Updated 03/22/01
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
147
--
Appendix D: SCSI Cables —
Storage Units — Controllers
F:
M:
I:
68:
50:
0.8:
16:
8:
Instructions: Identify Desired Controller Row and Storage Unit Column. The intersection of
row and column contains the cable group letter which supports the connection. Go to the
cable group under the corresponding storage unit for specific support. Read all Notes for row,
column, and any cable group footnotes.
Storage Unit 35311RU 3510020 3503B0X 3551001 Adapter
10L7113
Female - External
Male - External
Internal
16-bit, 68-pin High Density connector
8-bit, 50-pin Centronix Connector
16-bit, 68-pin Very High Density Connection
Interface (VHDCI) 0.8mm connector
16-bit, 68-pin connector
8-bit, 50-pin connector
Description
Part
Number
Max MB/sec.1
LVDS
Connector Type
160
X
F0.8
F68 or F50
F68
F0.8
F0.8
Max/
Connector
Channel LVDS
Type/
Note #
1
(MB/sec)
Max
2, 3
4
4, 5
2, 4
2, 4, 6
A
A
A
-
-
-
-
RAID Storage Controllers
ServeRAID-4L Ultra160 SCSI Controller
ServeRAID-4M Ultra160 SCSI Controller
ServeRAID-4H Ultra160 SCSI Controller
37L6091
37L6080
37L6889
160
160
160
X
X
X
F0.8/1
F0.8/2
F0.8/4
8
8
8
19K4646
Onboard
160
160
X
X
F0.8/1
F0.8/1
-
-
B
-
A
A
A
A
xSeries 240 / Netfinity 5600
xSeries 250
Netfinity 7100
Netfinity 7600
Onboard
Onboard
Onboard
Onboard
80
80
80
80
X
X
X
X
F0.8/1
F0.8/1
F0.8/1
F0.8/1
-
B
B
B
B
B
B
A
A
A
A
A
A
xSeries 370 / Netfinity 8500R
Onboard
80
X
F0.8/1
9
-
-
B
B
B
B
A
A
A
A
02K3454
40
-
F68/1
-
-
C
C
B14
B14
Onboard
Onboard
Onboard
Onboard
Onboard
-
-
n/a
n/a
n/a
n/a
n/a
-
-
-
-
-
Netfinity 2M Ultra2 SCSI Cable
Netfinity 4.2M Ultra2 SCSI Cable
03K9310
03K9311
-
X
X
M0.8-M0.8
M0.8-M0.8
11
11
X12
X
-
-
X
X
X
X
Netfinity 20M Ultra2 SCSI Cable
37L7101
-
X
M0.8-M0.8
7
X
-
-
-
-
76H3589
01K8027
-
-
M68-M0.8
M68-M0.8
X
X
X
X
X
X
X14
X
X14
X
70G9857
-
-
M68-M68
-
X
X
-
-
Ultra160 SCSI Controllers
PCI Wide Ultra160 SCSI Adapter
xSeries 350 / Netfinity 6000R - Ultra160 SCSI
Ultra2 SCSI Controllers
Ultra SCSI Controllers
PCI Fast/Wide Ultra SCSI Adapter
No Onboard External Port24
xSeries 200
xSeries 220
xSeries 330
xSeries 340 / Netfinity 4500R
xSeries 230 / Netfinity 5100
Cable Group A (M0.8-M0.8)
Cable Group B (M68-M0.8)
1M External 0.8mm SCSI Cable
2M External.8mm SCSI Cable
Cable Group C (M68-M68)
PC Server F/W to F/W External SCSI Cable-1m
14
Cable Group G (Other)
68-pin External Multimode LVD/SE SCSI Terminator
00N7956
M68
X
X
1. Maximum supported speeds may be limited by installation of lower speed devices, controllers or cable lengths greater than two meters.
2. Rack installation cable management requires devices to have a minimum cable length of two meters. Cable length requirements will vary based on placement within a single
or multiple rack suite.
3. Maximum speeds may be limited by the installed devices or SCSI controller.
4. Daisy chaining tape enclosures is not supported at this time.
5. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
6. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a 3551001 to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters
when attached to an LVD SCSI controller, and auto-termination when the 3551001 is powered off. External connector is 0.8mm VHDCI.
7. Cable lengths exceeding 4.3 meters are NOT supported for attachment to non-Ultra2 or Ultra160 controllers.
8. Maximum speeds may be limited by the enclosure or its installed devices.
9. Netfinity 7600 also includes an onboard controller equivalent to a Netfinity ServeRAID-4M Ultra160 SCSI Adapter (P/N 37L6080). See ServeRAID-4M for connectivity
requirements.
10. Does not support external attachment of SCSI devices attached to optional controllers.
11. Supports attachment to Ultra2 or single-ended SCSI controllers with operational speeds of up to Ultra2. Controller, storage unit, cable length or storage device limitations may
apply (see Max MB/sec row and column above).
12. EXP300 (P/N 35311RU) includes a single 2M Ultra2 SCSI cable similar to Netfinity 2M Ultra2 SCSI Cable (P/N 03K9310).
13. No external SCSI port is available on these systems. A supported optional controller must be installed. See the systems section to determine which controllers and external
storage units are supported then refer back to this table for cable requirements using the controller row. The Netfinity 4000R does not support customer installation of adapters
that must be installed inside the server. Nonstandard features must be installed at the factory. Contact your IBM Marketing Representative for more information.
14. Not supported for use in a rack. Rack installations require a minimum cable length of two meters.
148
Appendix E: IBM Serial I/O
IBM Serial I/O Port Module
Serial I/O
PM16DB Port
Module
(P/N 37L1418)
Serial I/O
PM16RJ Port
Module
(P/N 37L1417)
IBM Serial I/O Multiplexer Sets
IBM SERIAL I/O
IBM Serial I/O Adapters
Serial I/O 16RJ Multiplexer Set
(P/N 37L1419)
•Multiplexer Interface Unit
•RJ Expansion Module
•Power Supply
•Test Cable
IBM Serial I/O SST8P
DB Adapter
(P/N 37L1414)
Customer Supplied
Unshielded
Two-Twisted Pair
Cable < 3500ft (1km)
IBM Serial I/O SST16P
RJ Adapter
(P/N 37L1415)
IBM Serial I/O Power Supply
Serial I/O 16DB Multiplexer Set
(P/N 37L1420)
•Multiplexer Interface Unit
•DB Expansion Module
•Power Supply
•Test Cable
Serial I/O PS4
Power Supply
(P/N 37L1421)
IBM Serial I/O SST16P
DB Adapter
(P/N 37L1423)
Customer Supplied
Unshielded
Two-Twisted Pair
Cable < 3500ft (1km)
Includes
IBM Serial I/O SST128P
two
Expandable Adapter 4ft (1.2m)
(P/N 37L1416)
Cables
Sample Configurations
PS4
(P/N 37L1421)
4ft (1.2m)
Cables
Four PM16DB
(P/N 37L1418)
SST128P
(P/N 37L1416)
PS4
(P/N 37L1421)
16DB
Multiplexer Set
(P/N 37L1420)
PM16RJ
(P/N 37L1417)
PM16DB
(P/N 37L1418)
Customer
Supplied
Unshielded
Two-Twisted Pair Cable
< 3500ft (1km)
Updated 03/22/01
16RJ
Multiplexer Set
(P/N 37L1419)
37L1414
Serial I/O SST8P DB Adapter1, 6
37L1415
Serial I/O SST16P RJ Adapter2, 6
37L1423
Serial I/O SST16P DB Adapter3, 6
37L1416
Serial I/O SST128P Expandable Adapter4, 6
37L1417
Serial I/O PM16RJ Port Module5
37L1418
Serial I/O PM16DB Port Module5
37L1419
Serial I/O 16RJ Multiplexer Set5, 7
37L1420
Serial I/O 16DB Multiplexer Set5, 7
37L1421
Serial I/O PS4 Power Supply5
(1) Intelligent serial I/O interface card providing eight DB-25 RS232 serial
connections using an octopus cable. Support for all ports at 921.6Kbps
simultaneously.
(2) Intelligent serial I/O interface card providing sixteen RJ-45 RS232 serial
connections in a breakout box. Support for all ports at 115.2Kbps simultaneously.
(3) Intelligent serial I/O interface card providing sixteen DB-25 RS232 serial
connections in a breakout box. Support for all ports at 115.2Kbps simultaneously.
(4) Intelligent interface card providing up to 128 RS232 serial connections (DB25 or
RJ45) configured in 16-port increments utilizing any combination of Port Modules
and Multiplexer Sets. Includes two 4ft (1.2m) bus cables. Each 4ft cable supports
attachment of one to four Port Modules and/or Multiplexer Interface Units for a total
of eight per adapter. The first Port Module or Multiplexer Set attached to a cable
requires a Serial I/O PS4 Power Supply (P/N 37L1421). Support for all ports at
115.2Kbps simultaneously.
(5) Port Modules and Multiplexer Sets attach directly to one of the two standard 4ft
(1.2m) bus cables of the Serial I/O SST128P Expandable Adapter (P/N 37L1416) or
directly to one or more Port Modules or Multiplexer Sets already attached to one of
the cables. A maximum of four Port Modules or Multiplexer Sets may be attached to
a single cable. The first Port Module or Multiplexer Set attached to a cable requires a
Serial I/O PS4 Power Supply (P/N 37L1421).
(6) Serial I/O Adapters are 32-bit PCI half length cards. A maximum of four Serial I/O
adapters (in any combination) may be installed in a single host system.
(7) Requires a customer supplied Unshielded Two-Twisted Pair (Category 3
minimum) cable with a maximum length of 3,500ft (1Km).
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.
149
150
IBM ServicePac for Warranty and Maintenance Options for
IBM Servers and Server Peripherals
With IBM ServicePac for Warranty and Maintenance Options, you can upgrade the service included with your
hardware’s original warranty. We offer a number of service options with coverage for parts and labor so that you can
choose the package with the service response time that fits your needs. The service period for all options begins with
the date of installation of the machine.
Machine Name
Machine
Type*
Service
Description*
IBM Part
Number —
Electronic
Estimated
Retail Price
Base Warranty
IBM Servers
8477
xSeries 130, xSeries 135, xSeries 330
8654
Netfinity 3000
8476
Netfinity 3500
8644
Netfinity 3500 M10
8655
Netfinity 3500 M20
8657
xSeries 200
8478
xSeries 220
8645
Netfinity 4500R, xSeries 340
8656
Netfinity 5000/5000 Rack Mounted
8659
Netfinity 5100, xSeries 150, xSeries 230
8658
Netfinity 5500/5500 Rack Mounted
Netfinity 5500 M10/5500 M10 Rack Mounted
Netfinity 5500 M20/5500 M20 Rack Mounted
8660
3 YR 24x7 4-hour service 21P2018
3 YR 9x5/next day
21P2017
service
$925
$500
3 YR 24x7 4-hour service 30L9185
3 YR 9x5 4-hour service 41L2736
$750
$460
1 year parts & labor
Next business day
service response
3 years parts & labor
Next business day
service response
3 YR 24x7 4-hour service 21P2022
3 YR 9x5 4-hour service 21P2023
21P2021
3 YR 9x5/next day
service
$748
$610
$203
3 YR 24x7 2-hour service 31L2722
3 YR 24x7 4-hour service 30L9186
3 YR 9x5 4-hour service 41L2737
$2250
$1495
$900
3 YR 24x7 2-hour service 31L2723
3 YR 24x7 4-hour service 30L9187
3 YR 9x5 4-hour service 41L2738
$2995
$1995
$1196
3 YR 24x7 2-hour service 41L2743
3 YR 24x7 4-hour service 41L2742
3 YR 9x5 4-hour service 41L2739
$3745
$2495
$1920
3 years parts,
1 year labor
Next business day
service response
3 years parts & labor
Next business day
service response
8661
8662
Netfinity 5600/5600 Rack Mounted, xSeries 240
8664
Netfinity 6000R
8682
Netfinity 7000/7000 M10 Rack Mounted
8651
8680
Netfinity 7100
8666
Netfinity 7600
8665
Netfinity 8500
8681
Updated 2/16/01
For the latest product & technical information, refer to the Information Sources on pages 1 and 2.
151
IBM SERVICEPAC
Netfinity 1000
Machine Name
Machine Service
Type*
Description*
IBM Part
Number –
Electronic
Estimated
Base Warranty
Retail Price
IBM Server Peripherals
Rack/Storage Expansion Unit
3519
3 YR 24x7 2-hour service 41L2745
3 YR 24x7 4-hour service 41L2744
$540
$360
3 years parts & labor
DLT Tape Autoloader
3502
(108)
3 YR 24x7 4-hour service 41L2746
$1000
Next business day
service response
DLT Tape Library
3502
(314/R14)
3 YR 24x7 4-hour service 41L2747
$1450
EXP15 Storage Expansion Unit
3520 (2RU) 3 YR 24x7 2-hour service 41L2749
3 YR 24x7 4-hour service 41L2748
$600
$400
EXP10/EXP200 Storage Expansion Unit
3520
(1RU)
3 YR 24x7 2-hour service 41L2751
3 YR 24x7 4-hour service 41L2750
$600
$400
3530
EXP 300 Storage Expansion Unit
3531
3 YR 24x7 2-hour service 21P2019
3 YR 24x7 4-hour service 21P2020
$300
$200
EXP 500 Storage Expansion Unit
3560
3 YR 24x7 2-hour service 41L2767
3 YR 24x7 4-hour service 41L2766
$225
$150
Fibre Channel Hub
3523
3 YR 24x7 2-hour service 41L2753
3 YR 24x7 4-hour service 41L2752
$90
$60
Fibre Channel Controller
3526
3 YR 24x7 2-hour service 41L2755
3 YR 24x7 4-hour service 41L2754
$1935
$1290
NetMEDIA Storage Expansion Unit
3551
3 YR 24x7 2-hour service 41L2757
3 YR 24x7 4-hour service 41L2756
$180
$120
Rack/Storage Expansion Unit
9306
(200)
3 YR 24x7 2-hour service 41L2759
3 YR 24x7 4-hour service 41L2758
$255
$168
9306
(900)
3 YR 24x7 2-hour service 41L2761
3 YR 24x7 4-hour service 41L2760
$450
$300
9308
(42X/42P)
3 YR 24x7 2-hour service 41L2763
3 YR 24x7 4-hour service 41L2762
$450
$300
3542
3 YR 24x7 2-hour service 41L2769
3 YR 24x7 4-hour service 41L2768
$1140
$760
3 YR 24x7 2-hour service 41L2765
3 YR 24x7 4-hour service 41L2764
$299
$199
Raid Controller
3552
SP Switch
152
3529
Offering a variety of service levels to meet your needs
After we work with you and determine that service must be performed onsite by an IBM specialist, we will schedule the
service call and set up a target arrival time based on the service level you purchased and activated. We offer national
onsite coverage* and a number of service level options to fit your needs and budget. These include:
24x7 2-hour
A service technician is scheduled to arrive at your location within two hours after remote problem determination is
completed. We provide service around the clock, every day, including IBM holidays.
24x7 4-hour
A service technician is scheduled to arrive at your location within four hours after remote problem determination is
completed. We provide service around the clock, every day, including IBM holidays.
9x5 4-hour
A service technician is scheduled to arrive at your location within four business hours after remote problem
determination is completed. We provide service from 8:00 a.m. to 5:00 p.m. in your local time zone, Monday through
Friday, excluding IBM holidays. If after 1:00 p.m. it is determined that onsite service is required, you can expect the
service technician to arrive the morning of the following business day. For non-critical service requests, a service
technician will arrive by the end of the following business day.
9x5/next business day
A service technician is scheduled to arrive at your location on the business day after remote problem determination is
completed. We provide service from 8:00 a.m. to 5:00 p.m. in your local time zone, Monday through Friday, excluding
IBM holidays.
* These services are available for machines normally used for business, professional, or trade purposes rather than personal, family or household purposes. Not all
machine types and models are covered. Service period begins with the equipment date of purchase. Service must be purchased during the original limited product
warranty period. Service levels are response time objectives and are not guarantees. A service technician is scheduled to arrive at your location within two or four
business hours or the next business day (depending on service) after remote problem determination is completed. For the 9x5x4 hour service, calls dispatched
after1:00 p.m. local time, you can expect the service technician to arrive by the morning on the following business day. For non-critical service requests, a service
technician will arrive by the end of the following business day. If the machine problem turns out to be a Customer Replaceable Unit (CRU), IBM will express ship the
part to you for quick replacement. Onsite 24x7x2 hour service is not available in all locations. External peripherals, such as racks, tape drives, and channel
controllers require their own separate service coverage; they are not covered under the attached Machine. Service activation is required immediately following
purchase. Visit ibm.com/services/its/us/source/wamomxeu.pdf for complete details. For warranty service upgrades for machines not listed above or maintenance
service options on out-of-warranty machines call IBM at 1-888-426-4343 or your IBM Business Partner.
Updated 2/16/01
For the latest product & technical information, refer to the Information Sources on pages 1 and 2.
153
IBM SERVICEPAC
For complete information on IBM ServicePac services, visit: ibm.com/services/its/us/servicepac.html
IBM ServicePac for SmoothStart Services
for IBM Netfinity Servers
IBM ServicePac for SmoothStart Services are installation services designed to help accelerate the productive use
of IBM solutions. Now you don't have to worry about pulling valuable in-house resources from essential daily
activities. An IBM services specialist gives you customized service and helps by instructing your technical staff on
the basics of each task.
SmoothStart Services for Netfinity Servers include:
• Remote project coordination of onsite resources to implement your Netfinity solutions
• Installation and configuration of the rack mount or mini-tower Netfinity server
• Installation and configuration of the network operating system and Netfinity software tools
• Analysis and operational readiness verification of the Netfinity server hardware and software
• Basic skills session to familiarize your staff with the installation and configuration process
• Completion of the IBM product registration on your behalf.
SmoothStart Services for PC Cluster Servers include:
• Remote project coordination of onsite resources to implement your Netfinity solution
• Installation and configuration of two Netfinity racks and two Netfinity servers
• Installation and configuration of the Microsoft cluster server software
• Analysis and operational readiness verification of the Netfinity cluster server hardware and software
• Basic skills session to familiarize your staff with the installation and configuration process
• Completion of the IBM product registration on your behalf
IBM ServicePac for SmoothStart Services for Netfinity Servers — 31L1497
IBM ServicePac for SmoothStart Services - PC Cluster Servers — 41L2770
For complete information on IBM ServicePac services, visit ibm.com/services/its/us/servicepac.html
154
IBM ServicePac for Installation Services
With IBM ServicePac for Installation Services we install your IBM client, server and attached server peripherals. You may
not have the time or resources available to install the new equipment you've just purchased. Our multiple levels of
installation services allow you to select the one you need based on your locations, products and quantity. IBM
specialists will work with you to coordinate a smooth, timely and affordable installation.
Server Installation
Options include Rack Installation, Server Hardware Installation and Server Hardware with Network Operating System
Installation.
• Rack Installation — 21P1999
(supported machine types include: 9306 and 9308)
• Server Hardware Installation for entry/mainstream — 21P1995
• Server Hardware and Network Operating System Installation for entry/mainstream — 21P1996
(supported machine types include: 8476, 8477, 8478, 8644, 8645, 8654, 8655, 8656, 8657, 8658,
8659, 8660, 8661, 8662, 8664 and 8682)
• Server Hardware Installation for enterprise/high end — 21P1997
• Server Hardware and Network Operating System Installation for enterprise/high end — 21P1998
(supported machine types include: 8651, 8665, 8666, 8680 and 8681)
Server Peripherals
Options include installation for Expanded Storage, Fibre Channel and Tape Subsystem.
Client Installations
Installation services for client systems cover mobile and desktop systems. Volume discounts are available based on the
number of machines to be installed at a single site location and have continuous daily activity until completion.
Visit ibm.com/services/its/us/ss-spinstl.html for complete details.
For complete information on IBM ServicePac services, visit ibm.com/services/its/us/servicepac.html
Updated 2/16/01
For the latest product & technical information, refer to the Information Sources on pages 1 and 2.
155
IBM SERVICEPAC
• Expanded Storage — 21P2010 (supported machine types include: 3520, 3530, 3551 and 3560)
• Fibre Channel — 21P2011 (supported machine types include: 3523, 3526, 3529 and 3552)
• Tape Subsystem — 21P2012 (supported machine types include: 3502 and 3510)
Important Notes
IBM reserves the right to change product specifications and to discontinue marketing products without notice.
*MHz only measures microprocessor internal clock speed, not application performance. Many factors affect application performance.
**When referring to storage capacity, GB stands for one billion bytes.Total user-accessible capacity may be less.
***The quotation function within OrderBUILDER allows reseller specific pricing to be included.
****Tape Drives which utilize data compression technology have storage capacity that will vary depending upon whether the drive is operating in
native mode (without compression) or compressed mode. Actual storage capacity will vary based upon many factors and may be less than the
maximum possible.
Maximum internal hard disk drive capacities assume the replacement of any hard disk drives and the population of all hard disk drive bays with
the largest currently supported drives available from IBM.
The information contained in this document has not been submitted to any formal IBM test and is distributed AS IS. The use of this information or
the implementation of any of these techniques is a customer responsibility and depends on the customer’s ability to evaluate and integrate them
into the customer’s operational environment. While each item may have been reviewed by IBM for accuracy in a specific situation, there is no
guarantee that the same or similar results will be obtained elsewhere. Customers attempting to adapt these techniques to their own
environments do so at their own risk.
For more information on IBM’s statement of Limited Warranty, please call 1-800-772-2227 in the United States, 1-800-426-2255 in Canada, or
contact your IBM representative or reseller. Copies are available upon request.
Energy Star compliance: The EPA, as a matter of policy, does not endorse any particular company or its products.
Unless otherwise stated, IBM makes no representations or warranties with respect to non-IBM products. Support (if any) for the non-IBM
products is provided by the third party, not IBM. IBM makes no warranties, express or implied, regarding non-IBM products and services that are
ServerProven, including but not limited to the implied warranties of merchantability and fitness for particular purpose. These products are offered
and warranted solely by third parties.
Unless otherwise noted, phone numbers and fax numbers are valid only in the United States. Outside the United States, please call your local
IBM for assistance.
Applications included in IBM products may vary from retail versions and may not include all documentation or functions. Not all products are sold
separately.
This publication was produced in the United States. IBM may not offer the products, services or features discussed in this document in other
countries, and the information is subject to change without notice. Consult your local IBM representative for more information on the products,
services and features available in your area.
©IBM Personal Computing Division
Department K0LA
3039 Cornwallis Rd.
Research Triangle Park, NC 27709
Printed in the United States of America
04-01
All the part numbers referenced in this publication are product part numbers and not service part numbers.
This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these
changes will be incorporated in new editions of this publication. IBM may make improvements and/or changes in the product(s) and/or
program(s) described in this publication at any time. IBM reserves the right to alter specifications and other product information without notice. It
is your responsibility to obtain the latest information.
Other part numbers in addition to those listed in this document may be required to support a specific device or function.
Data on competitive products is obtained from publicly obtained information and is subject to change without notice. Please contact the
manufacturer for the most recent information.
This IBM equipment is subject to applicable rules and regulations of the United States Federal Communication Commission (FCC).
The following items are trademarks or registered trademarks of IBM Corporation in the United States or other countries or both: IBM, Active PCI,
Alert on LAN, Chipkill memory, the e-business logo, ESCON, IntelliStation, LANStreamer, Light Path Diagnostics, NetBAY3, NetBAY3E, NetBAY22,
Netfinity, OS/2, Predictive Failure Analysis, ServeRAID, ServerGuide, ServerProven, SurePath, TechConnect, Wake on LAN, xSeries,
800-CALL-IBM.
TME 10 Netfinity is a trademark of Tivoli Systems, an IBM Company. Lotus, Lotus Notes and Lotus SmartSuite are trademarks of Lotus
Development Corporation.
Intel, Pentium, Celeron, MMX, and Pentium III Xeon are trademarks or registered trademarks of Intel Corporation. Microsoft, Windows and
Windows NT are trademarks or registered trademarks of the Microsoft Corporation. UNIX is a registered trademark in the United States and other
countries or registered trademarks licensed exclusively through X/Open Company Limited. Trinitron is a trademark of the Sony Corporation. Java
and HotJava are trademarks of Sun MicroSystems, Inc. Adobe and PostScript are trademarks of Adobe Systems, Inc. APC is a trademark of
American Power Conversion, Inc. All other registered trademarks and trademarks are properties of their respective owners.
156
򔻐򗗠򙳰
®
© C o p y r i g h t I B M C o r p o ra t i o n 2 0 01
IBM Personal Computing Division
Department K0LA
3039 Cornwallis Road
Research Triangle Park, NC 27709
Printed in the United States of America
4/01
All Rights Reserved
Printed on recycled paper containing
10% recovered post-consumer fiber.
G326-8034-23
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising