Shading Guide
|
Lutron shading solutions product guide
Serena®
Sivoia® QS Triathlon®
Sivoia QS
Sivoia QS Wireless
|
Lutron shading solutions product guide table of contents
Transforming daylight......................................... 01
Product line....................................................... 02
Innovations in daylight control............................ 03
Electronic drive unit........................................... 04
Shade Configuration Tool................................... 05
Sivoia® QS Triathlon®/Serena®
NEW Battery-powered roller shades
System overview............................................... 07
Dimensions........................................................ 11
Battery-powered insulating honeycomb
shades
System overview............................................... 15
Dimensions........................................................ 17
Sivoia QS/Sivoia QS Wireless
Kirbé® vertical drapery system
System overview............................................... 79
System components......................................... 81
Roller shades
System selection process.................................. 21
Overview........................................................... 23
roller 20™........................................................... 25
roller 64™........................................................... 27
roller 100™ / roller 150™ / roller 300™
with LIFT™......................................................... 29
Angled coupler.................................................. 35
WIDR tube option.............................................. 36
roller 225™......................................................... 37
Large pocket..................................................... 39
Custom pocket.................................................. 40
Cable-guided shades........................................ 41
Manual shades.................................................. 42
Applications....................................................... 43
Roman shades
System overview............................................... 83
Dimensions........................................................ 85
Hyperion® solar-adaptive shading
Commercial total light control............................ 45
System overview............................................... 46
System components......................................... 47
Example............................................................ 49
Controls
seeTouch® keypads......................................... 101
Engraving options............................................ 103
Technology overview....................................... 104
Sivoia QS controls
seeTouch QS keypads.................................. 105
GRAFIK Eye® QS.......................................... 106
Sivoia QS wireless controls
seeTouch QS wireless keypads..................... 107
RF remote controls.......................................... 109
RadioRA® 2 integration.................................... 111
Tensioned shades
System selection process.................................. 51
System overview............................................... 53
Mounting options............................................... 54
Measuring instructions....................................... 57
|
Drapery track
System selection process.................................. 61
System overview............................................... 63
Mounting options............................................... 66
System installation............................................. 67
Curved.............................................................. 68
Track splicing..................................................... 69
Manual override carrier...................................... 70
Pinch pleat drapery panels................................ 71
Ripplefold drapery panels.................................. 72
Finished drapery panels..................................... 73
Cornices............................................................ 74
System capacities (D105, D145, D175)............. 75
Venetian blinds
System overview............................................... 87
Dimensions........................................................ 89
NEW Horizontal sheer blinds
System overview............................................... 91
Dimensions........................................................ 92
NEW Pleated and Fashion Honeycomb shades
System overview............................................... 97
Dimensions........................................................ 99
Cover photo © Christopher Barrett: Johnson Controls, Inc., featuring Sivoia QS roller shades,
C Lutron
Quantum® total light control management, Hyperion solar-adaptive shading
IR remote controls........................................... 113
Lutron dimmers............................................... 115
Lutron accessories.......................................... 117
Wiring
Overview......................................................... 119
Power panel wiring diagram............................. 121
QS Link power supply..................................... 122
Power panel.................................................... 123
Lutron supplied cable...................................... 124
Power panel wiring diagram.................................125
Overview......................................................... 126
Power panel.................................................... 127
Lutron supplied cable...................................... 128
Integration for total light control
Single room..................................................... 131
Whole home.................................................... 132
Whole building................................................. 133
Third-party integration..................................... 134
The Lutron Design Collections
Overview......................................................... 136
Roller fabric rules............................................. 139
Bottom bars.................................................... 140
Sealed battens................................................ 141
Soft treatment fabric rules................................ 142
Customer’s own material................................. 143
Stocking categories......................................... 145
Specification
The Lutron difference....................................... 147
Selection guides
NEW Pleated and Honeycomb shades......... 149
Roller and tensioned shades......................... 151
Roman shades............................................. 153
Drapery system............................................ 155
Venetian blinds............................................. 157
NEW Sivoia QS Triathlon shades.................. 159
Horizontal sheer blinds................................. 162
Stacking guidelines
Pleated and Honeycomb shades.................. 165
Insulating honeycomb shades...................... 166
|
Lutron D
|
Lutron shading solutions transforming daylight
Lutron has been the world’s leading manufacturer of lighting control systems for more than 50 years,
seamlessly integrating electric and daylight control systems. We focus on innovation, world-class
engineering, and customer service to provide the ideal solution for any specification.
We offer shading solutions for residential and commercial spaces, in order to meet the needs of any
application.
Residential spaces
The right light is crucial for adding comfort, creating ambiance, or making a room more versatile.
Automated shading solutions, whether on their own or combined with electric light control, can provide
sophisticated daylight control.
Commercial spaces
Adding automated shades to a commercial application helps increase comfort and productivity.
Depending on the type of fabric chosen, shades can preserve views while cutting glare and thermal heat
gain, or block daylight for presentations and privacy.
|
01 Lutron
|
Lutron shading solutions product line
Choose from our extensive line of shading solutions.
Roller shades
Roller shades create the perfect light for any space or activity, and are available in
sheer, translucent, and blackout fabrics.
Drapery tracks
Drapery track systems electronically operate pinch pleat or ripplefold fabric panels
to elegantly provide quiet, convenient control of daylight.
Kirbé® vertical drapery system
The unique Kirbé vertical drapery system smoothly rolls fabric up and completely out
of the way like a roller shade, while still maintaining the pleats of a traditional drapery.
Roman shades
CERUS® (cord-eliminating Roman uptake system) Roman shades replace
traditional cord construction with sheer uptake bands, creating a more safe,
smooth, and reliable shade.
Venetian blinds
Venetian blinds ensure privacy while still allowing daylight to filter into a space,
with the attractive look of 2” wooden, aluminum, or leather slats.
Tensioned shades
Tensioned shades keep fabric panels taut and parallel to windows at a variety of
slopes, providing an ideal solution for skylights and angled windows.
Cable-guided shades
Cable-guided shades achieve precise shading control by keeping roller shades at the
exact angle of a window, as well as prevent shade motion in areas of high airflow.
Horizontal sheer blinds
Horizontal sheer blinds combine fabric vanes and sheer layers to provide the
perfect blend of filtered sunlight inside a space and view to the outside, while
maximizing control of both.
Pleated shades
Pleated shades lend a crisp, modern style to any space, and are available in a wide
array of fabric options for a signature look.
Honeycomb shades
Honeycomb shades add dimension to a space thanks to their cellular design,
while their air pockets trap heat, providing superior insulation.
|
Lutron 02
|
Lutron shading solutions innovations in daylight control
Quality and performance
The Lutron family of shading solutions offers
convenience at the touch of a button with quiet
electronic drives that operate shades smoothly
and in precise alignment.
Ultra-quiet electronic drive
Our quiet electronic drive operates roller shades
and draperies at a near-silent level rated at 38 dBA
at 3 ft (1 m) (roller 20™ operates at 44 dBA and
roller 300™ operates at 50 dBA).
Intelligent control
The Lutron electronic drive unit (EDU) optimizes
shade, blind, and drapery adjustments through
programmable presets that you save and recall
from an intuitive keypad.
|
03 Lutron
seeTouch® keypad
Simplified installation
Our shading systems can be configured and
reprogrammed at the point of control without any
rewiring, without access to the EDU, and without
the use of a group controller. The mounting
brackets allow an installer to adjust the shade’s
level, projection, and side-to-side position, all after
the shade has been installed.
Integration of daylight and electric light
Lutron lighting control systems work together with
our controllable shading systems to offer complete
control of all the light in any space. Adjust shades
and draperies in conjunction with electric light levels
to create the right light for any mood or activity.
|
Lutron shading solutions electronic drive unit
Electronic Drive Unit (Sivoia® QS shown)
(operates roller shades, Roman shades, Kirbé® vertical drapery systems, tensioned shades, and
Venetian blinds with independent lift and tilt)
Communications circuit
• Addresses, programs, and
reconfigures the system from
any system component: the EDU
mounted in the ceiling, keypad
installed in the wall, or a handheld
remote control
• Eliminates the need for external
“group controllers,” simplifying
programming and future changes
to the system
Protection against
electrostatic discharge
Provides safe, controlled
discharge of potentially
damaging static created by
shade fabric
Hall effect sensor
Measures motor position
to ensure shades move
in unison and in
precise alignment
• Digitally sets and
stores limits
•
Gear-motor
Features precision design to
ensure ultra-quiet operation
Electronic drive circuit
Variable-speed motor
drive ensures silent,
accurate control
Microprocessor
Provides smooth, consistent shade
movement. Shades align and track together.
• Eliminates audible starts and stops
• Stores precise, user-defined preset levels
for each keypad
•
Back of circuit board
10-year power failure memory
Records motor movements to ensure that
position is accurately saved even if the
EDU is active when power is interrupted
Drapery track EDU
Drapery track EDU internal components are similar to that of a roller
shade—reconfigured to fit into a slim profile drapery motor while
maintaining the quiet precision of Lutron controllable shades.
For additional drapery track information, see page 61.
|
Lutron 04
|
Lutron shading solutions Shade Configuration Tool
Shade Configuration Tool (SCT) software
This customer-acclaimed tool helps you
accurately and quickly lay out and price jobs,
create project details for sign-offs, and create
professional-looking proposals for customers.
SCT checks design rules as you go, ensuring
that the shading system you design can be built
to your specifications.
SCT features
• Addition of new products
Lutron continues to introduce new window
system product innovations. New products are
available within the SCT tool for easy quoting
and ordering.
|
05 Lutron
Submittal engine
Create job-specific submittals automatically within
the SCT. The submittal engine includes detailed
section views, elevations, wiring diagrams, and more.
Customizable reports ensure that all submittals
contain only the information that you need.
•
Smart Submit
Revised interface for electronic quotes and orders.
This system features greater emphasis on automated
quoting and ordering to minimize lead-times while
creating a more intuitive user experience.
•
Addition of various marketing materials
- Lineal samples
- Demo cases
- Fabric samples
-Literature
•
Sivioa QS Triathlon /Serena
®
®
®
| roller shades
|
Lutron 06
|
battery-powered roller shades system overview
Lutron battery-powered shades offer incredible value at an affordable price, backed by the quality of the
Lutron brand. These shades add convenience, enhance décor, and save energy—all at the touch of a
button. These shades are also available as a shade-only solution (Serena®) or as part of a whole-home
control system (Sivoia® QS Triathlon®).
Add convenience
Adjust shades with a wire-free handheld or wallmounted control from anywhere in the room
•
A single button press adjusts hard-to-reach
window treatments
•
•
•
Shades operate quietly to prevent disruption in
any space
•
Cord-free design makes this solution safe for
homes with young children or pets
•
Enhance your décor
• Choose from beautiful fabrics, colors, styles,
and textures
Give your room a crisp, clean look that
complements many decorating styles
•
•
•
Save energy
Lower shades in summer to insulate the space
and help reduce cooling costs
aise shades in winter to let sun in during the
R
day and lower them at night to trap the day’s
heat, reducing heating costs
Integrate seamlessly
Sivoia QS Triathlon shades are the only batterypowered shades available today that integrate
seamlessly with a whole-home control system
such as RadioRA® 2 or HomeWorks® QS
ontrol your shades in conjunction with your
C
lights—and transform your space for any activity
•
Shades are available as wide as 96” and as tall as 120”, depending on fabric
•
Shades use 6-8* store-bought D-cell batteries, depending on shade size
•
Wired power options are also available
|
07 Lutron
Control options
These shades are offered with the following control options:
The two raise/lower buttons on
the seeTouch® keypad let you
adjust shades to just the right
level (Siovoia® QS Triathlon® only).
This remote has four buttons. Each
button can be programmed to a single
shade or to a select group of shades that
you want to control at the same time.
seeTouch keypad
The Pico® wireless control is small
enough to leave on a side table
without taking up a lot of room.
4-group RF remote
control (Serena® only)
Pico wireless control
Long battery life
The shade drive uses Triathlon® power technology. This technology utilizes a hybrid drive design and
ultra-efficient standby power, which extends the battery life to 3-5 years*.
Simple
power options
Simple power
options—Makes
installing shades easy
and affordable—even
if you can’t pull wires.
Instant
digital response
Instant digital
response—Immediate
reliable response to RF
system commands,
even with batterypowered shades.
Shade returns to Eco
mode when not in use
to preserve power and
minimize vampire loads.
Precision
hybrid drive
Precision hybrid
drive—Combines low
power requirements
with stored energy
to move shade while
maintaining precision
alignment for
superior aesthetics.
*The batteries will last 3 – 5 years on a 3’ x 5’ light-filtering shade, assuming
the shade moves up and down twice a day, 365 days a year.
Synergistic
performance
Synergistic
performance—
Triathlon combines
these three elements
to deliver the most
reliable, powerefficient, shading
system available today.
|
Lutron 08
|
battery-powered roller shades system overview
Fabric options
Shades are available in a wide variety of fabric colors and textures. Choose from sheer, translucent,
and blackout fabrics.
Translucent
Sheer
•
•
Open weaves preserve views
to outside and filter sunlight
Ideal for rooms where you don’t
need complete privacy
•
•
Blackout
Tighter weaves transform harsh
daylight into a soft, filtered glow
Provides increased privacy
for spaces like bathrooms
•
•
Opaque fabrics block light
from entering the space
Ideal for bedrooms and media
rooms for complete privacy
Patent-pending headrail design
•
Innovative headrail simply tips
forward to reveal the battery tray—
without taking the shade down
Tip down the headrail.
With fascia — closed
With fascia — open
Headrail — closed
Headrail — open
|
09 Lutron
Change the batteries.
NEW Designer hembar
Manual options
Manual options are available to coordinate with all of your automated
window treatments. Contact your local Lutron shades provider or sales
representative for details.
Plug-in power supply
• CSPS-XX-1-6-WH available separately.
CSPS-P1-1-6-WH =
• Includes 15 ft (4572 mm) power wire.
CSPS-P2-1-6-WH =
• Wiring compartment can be located on either side.
CSPS-P3-1-6-WH =
CSPS-P1-1-6-WH =
CSPS-P2-1-6-WH =
CSPS-P3-1-6-WH =
Power panel*
CSPS-P1-10-6 available separately.
CSPS-P1-10-6
Line voltage
Up to 10
power
outputs
* Secondary wiring must be of type
CL2, CL2P, CL2R, CL2X or other cable
with equivalent or better electrical,
mechanical, and flammability ratings
in accordance with local and national
electric code.
|
Lutron 10
|
battery-powered roller shades dimensions
Shade back cover:
(all battery-powered
models; all models with
optional fascia)
0.40 in
(10 mm)
0.48 in
(12 mm)
1.00 in
(25 mm)
3.00 in
(76 mm)
SHADE WIDTH
1.28 in
(32 mm)
Optional fascia with end caps (not available with reverse roll):
4.94 in
(125 mm)
3.375 in
(86 mm)
SHADE WIDTH
Wired power and cordless manual models
1.80 in
(46 mm)
0.925 in
(23 mm)
3.00 in
(76 mm)
1.570 in
(40 mm)
Mounting bracket
|
11 Lutron
Shade bracket
With fascia
Fully recessed
Without fascia
Fully recessed
33/8”
31/8”
(86 mm)
(80 mm)
Please note: For partial recess, the location of the mounting screw is 0.5” (13 mm) in from the back of the
bracket for roller shades and .75” (19 mm) for honeycomb shades.
|
Lutron 12
|
13 Lutron
Sivoia QS Triathlon /Serena
®
®
®
| insulating honeycomb shades
|
Lutron 14
|
battery-powered insulating honeycomb shades system overview
Lutron battery-powered shades offer incredible value at an affordable price, backed by the quality of the
Lutron brand. These shades add convenience, enhance décor, and save energy—all at the touch of a
button. These shades are also available as a shade-only solution (Serena®) or as part of a whole-home
control system (Sivoia® QS Triathlon®).
Add convenience
Adjust shades with a wire-free handheld or wallmounted control from anywhere in the room
•
A single button press adjusts hard-to-reach
window treatments
•
Shades operate quietly to prevent disruption in
any space
•
•
•
•
Cord-free design makes this solution safe for
homes with young children or pets
•
Enhance your décor
• Choose from beautiful fabrics, colors, styles,
and textures
•
Give your room a crisp, clean look that
complements many decorating styles
•
•
Save energy
Lower shades in summer to insulate the space
and help reduce cooling costs
aise shades in winter to let sun in during the
R
day and lower them at night to trap the day’s
heat, reducing heating costs
Insulate your home effectively with the heattrapping air pockets of insulating honeycomb
shades, which enhance energy efficiency
Integrate seamlessly
ivoia QS Triathlon shades are the only batteryS
powered shades available today that integrate
seamlessly with a whole-home control system
such as RadioRA® 2 or HomeWorks® QS
ontrol your shades in conjunction with your
C
lights—and transform your space for any activity
Control options
These shades are offered with the following control options:
The two raise/lower buttons on
the seeTouch® keypad let you
adjust shades to just the right
level (Siovoia QS Triathlon only).
seeTouch keypad
The Pico® wireless control is small
enough to leave on a side table
without taking up a lot of room.
Pico wireless control
|
15 Lutron
4-group RF remote
control (Serena only)
This remote has four buttons. Each button can
be programmed to a single shade or to a select
group of shades that you want to control at the
same time.
ace
es
Long battery life
The insulating honeycomb shade drive uses Triathlon® power technology. This technology utilizes a
hybrid drive design and ultra-efficient standby power, which extends the battery life to 3 years*.
Simple
power options
Instant
digital response
Simple power
options—Makes
installing shades easy
and affordable—even
if you can’t pull wires.
Instant digital
response—Immediate
reliable response to RF
system commands,
even with batterypowered shades.
Shade returns to Eco
mode when not in use
to preserve power and
minimize vampire loads.
Precision
hybrid drive
Synergistic
performance
Synergistic
performance—
Triathlon combines
these three elements
to deliver the most
reliable, powerefficient, shading
system available today.
Precision hybrid
drive—Combines low
power requirements
with stored energy
to move shade while
maintaining precision
alignment for
superior aesthetics.
Fabric options
Shades are available in different light transmittance options, as well as a variety of colors and textures.
Sheer
Designer fabrics that allow
daylight to transmit through the
shade and also allow views
to the outside.
Light-Filtering
Fabrics that allow daylight to
transmit through the shade
but limit specific views to the
outside. Available in single-cell
or double-cell options.
Room-Darkening
Fabrics that utilize a room-darkening
lining to eliminate light transmission
through the shade and block
views to the outside. Available in
single-cell style.
Patent-pending headrail design
Our exclusive Tap n’ Tilt™ technology makes changing the batteries a breeze, without ever removing the shades.
1
To replace
Remove and replace all
batteries
batteries from each tray
buttons above
Press
buttons above Press
headrail to expose batteries headrail to expose batteries
1
2
2
Remove and replace all
batteries from each tray
Simply press the release buttons, Change the batteries...
allowing the headrail to tilt forward.
e
e
To view instructional video on ho
visit: www.lutron.com/cellularsha
call 800.523.9466 to speak to a
And snap the headrail back
in place.
*The batteries will last 3 – 5 years on a 3’ x 5’ light-filtering shade, assuming
the shade moves up and down twice a day, 365 days a year.
|
Lutron 16
|
battery-powered insulating honeycomb shades dimensions
Tap n’ TiltTM shade brackets
Top
Front
1.74 in
(43 mm)
Side
2.45 in
(62 mm)
1.12 in
(28,5 mm)
Spacer*
(side view)
0.74 in
(19 mm)
0.60 in
(15 mm)
2.62 in
(67,5 mm)
System side view
(headrail endcap and
other details omitted for
clear view of brackets)
System side view
(headrail endcap and
other details omitted for
clear view of brackets)
0.50 in
(13 mm)
1.12 in
(28,5 mm)
brackets
Top cable brackets
0.74 in
(19 mm)
0.74 in
(19 mm)
Shades that are not wide enough to include battery holders within the headrail have a battery holder
Top Side
Top Side
FrontFront
Front Side
Side
Spacer*
Spacer*
located
on the back ofTop
the 1.12
headrail.
MountingTop
bracket
spacers are included
(side2.00
view)
(side view)to provide additional
1.68
2.00 in
in
in
1.12 in
in
Shade
Shade
(43 mm)
(51 mm)
(51 mm)
(28,5
mm)
(28,5
mm)
rear clearance.
bracket
bracket
5.91 in (150 mm)
0.60 in
(15 mm)
0.60
in in
2.62
(15
mm)mm)
(67,5
1.12 in
(28,5 mm)
Front
1.45 in 0 79 in
(37 mm) (20 mm)
Spacer*
(side view)
Side
1.45 in
(37 mm)
0.50 in
(13 mm)
* Spacers are included when outside-mount above/below
trim is indicated on the original order, and/or the shade is
equipped with an external battery holder.
|
17 Lutron
Top
cable
bracket
2.62inin
0.877
(67,5 mm)
(22 mm)
0.50 in
(13 mm)
ble anchorsBottom cable anchors
Side
Top
cable
bracket
0.50 in
(13 mm)
Spacer*
Cable-guided
applications
(side view)
•
For vertical outsidemount applications
•
Prevent shades from
swaying
when mounted
0.50 in
(13
mm)
to doors or in areas of
heavy airflow
•
Same maximum size
(96” x 96”)
and fabric options as standard
honeycomb shades
•
Choose from Sienna, Biscuit, or Snow
for cable anchor colors to complement
paint or hardware colors
Manual options
Manual options are available to coordinate with all of your automated
window treatments. Contact your local Lutron shades provider or sales
representative for details.
Plug-in power supply
• CSPS-XX-1-6-WH available separately.
CSPS-P1-1-6-WH =
• Includes 15 ft (4572 mm) power wire.
CSPS-P2-1-6-WH =
• Wiring compartment can be located on either side.
CSPS-P3-1-6-WH =
CSPS-P1-1-6-WH =
CSPS-P2-1-6-WH =
Power panel*
CSPS-P1-10-6 available separately.
CSPS-P3-1-6-WH =
CSPS-P1-10-6
Line voltage
Up to 10
power
outputs Line voltage
CSPS-P1-10-6
Up to 10
power
outputs
* Secondary wiring must be of type
CL2, CL2P, CL2R, CL2X or other cable
with equivalent or better electrical,
mechanical, and flammability ratings
in accordance with local and national
electric code.
|
Lutron 18
|
battery-powered insulating honeycomb shades fabric stack
Use these stacking guidelines if you plan on installing your insulating honeycomb shade in a place where you
need to raise the entire shade above an obstacle (such as above doors that open). These guidelines will help
you determine how high to mount your shade, so that the shade will clear the obstacle when it’s fully raised.
A=Stack height: the total height of the fully raised
shade from the top of the bracket to the bottom
of the bottom rail
B=1 5/8 in. (42 mm)—headrail height
C= 5/8 in. (16 mm)—bottom rail height
D=2 5/8 in. (67 mm)—bracket height
Dimensions for A
Cyprus
Your
Shade
Height
1 ft.
2 ft.
3 ft.
4 ft.
5 ft.
6 ft.
7 ft.
8 ft.
LightFiltering
2 3/4 in.
(70 mm)
3 in.
(77 mm)
3 1/8 in.
(80 mm)
3 3/8 in.
(86 mm)
3 5/8 in.
(93 mm)
3 3/4 in.
(96 mm)
4 in.
(102 mm)
4 1/8 in.
(105 mm)
RoomDarkening
2 7/8 in.
(74 mm)
3 in.
(77 mm)
3 1/4 in.
(83 mm)
3 3/8 in.
(86 mm)
3 5/8 in.
(93 mm)
3 3/4 in.
(96 mm)
4 in.
(102 mm)
4 1/8 in.
(105 mm)
Monaco and Rio
LightRoomFiltering Darkening
2 7/8 in.
2 7/8 in.
(74 mm)
(74 mm)
1
3 /8 in.
3 1/8 in.
(80 mm)
(80 mm)
3 3/8 in.
3 3/8 in.
(86 mm)
(86 mm)
5
3 /8 in.
3 5/8 in.
(93 mm)
(93 mm)
7
3 /8 in.
3 7/8 in.
(99 mm)
(99 mm)
1
4 /8 in.
4 in.
(105 mm) (102 mm)
4 3/8 in.
4 1/4 in.
(112 mm) (108 mm)
4 5/8 in.
4 1/2 in.
(118 mm) (115 mm)
Note: For fire-rated fabrics, add 10% to stack height.
|
19 Lutron
DoubleCell
3 1/8 in.
(80 mm)
3 1/2 in.
(89 mm)
3 7/8 in.
(99 mm)
4 1/4 in.
(108 mm)
4 5/8 in.
(118 mm)
5 in.
(127 mm)
5 1/4 in.
(134 mm)
5 5/8 in.
(143 mm)
Designer Collections
Napa
3 in.
(77 mm)
3 3/8 in.
(86 mm)
3 3/4 in.
(96 mm)
4 1/8 in.
(105 mm)
4 1/2 in.
(115 mm)
3 3/4 in.
(96 mm)
5 1/8 in.
(131 mm)
5 1/2 in.
(140 mm)
Sedona
2 3/4 in.
(70 mm)
2 7/8 in.
(74 mm)
3 1/8 in.
(80 mm)
3 1/4 in.
(83 mm)
3 1/2 in.
(89 mm)
3 5/8 in.
(93 mm)
3 3/4 in.
(96 mm)
4 in.
(102 mm)
Prague
2 3/4 in.
(70 mm)
3 in.
(77 mm)
3 1/4 in.
(83 mm)
3 1/2 in.
(89 mm)
3 3/4 in.
(96 mm)
4 in.
(102 mm)
4 1/4 in.
(108 mm)
4 1/2 in.
(115 mm)
|
Sivoia QS/Sivoia QS wireless roller shades
®
|
Lutron 20
|
roller shades system selection process
Determine how
roller shade
will be installed
Choose one:
p Inside mount
p Outside mount
Determine which control
technology will be used*
p Sivoia® QS
- Best for whole home,
commercial spaces, and
lighting integration systems
p Sivoia QS Wireless
Choose one:
p Wall mount
p Ceiling mount
p Jamb mount
p Pocket mount
(Recessed)
p Fascia mount
- Best for single room and whole
home systems, integration
with RadioRA® 2 and
HomeWorks® QS systems
Take
system
measurements
Roller shade size =
system width ______ x
system height _______
(bracket to bracket)
Operator required:
p roller 20™
For shades up to
20 sq. ft. (1.86 sq. m)
p roller 64™
For shades up to
64 sq. ft. (5.95 sq. m)
p roller 100™
For shades up to
100 sq. ft. (9.29 sq. m)
p roller 150™
(QS and QS Wireless only)
For shades up to
150 sq. ft. (13.9 sq. m)
p roller 225™
For shades up to
225 sq. ft. (20.9 sq. m)
p roller 300™ with Lutron
Intelligent Façade
Technology ( LIFT™)
For shades up to
300 sq. ft. (27.87 sq. m)
|
21 Lutron
* See page 104 for control technology overview matrix.
Specify
drive location
for pre-wiring
p Left drive
p Right drive
Specify
fabric
roll detail
p Regular
(standard)
p TBD
p Reverse
Specify wiring topology
p Individual transformers
(recommended for
installations requiring
local wiring)
p Power panel
(recommended for
installations requiring
centralized wiring)
Specify
fabric
p Sheer
Fabrics feature open
glass
weaves, so sunlight is
filtered while preserving
the view
glass
(recommended for
applications where
objects such as
handles or levers
protrude from the
window and may
interfere with
shade travel)
p TBD
p Translucent
These fabrics permit
some light, but are
not open weaves, so
the view is limited to
shapes and shadows
p Blackout
These fabrics prevent
all light from passing
through the material
Bottom bar
p Architectural half wrap
p Architectural exposed
p Sealed
p 1" exposed
p Round
p Cable-guided
p Designer hembar
Some fabrics limit
bottom bar selection
Specify
lineal
requirements
pF
ascia and top
back cover
p Fascia only
pT
op back cover
only
pP
ocket with flap
pF
lap and
hanger only
p No top treatment
p TBD
Blackout options
p Side channels
p Sill angle
Metal color
p Bronze
p White
p Clear Anodized
p Black
p Light Ivory
p Taupe
p Slate Grey
p Custom
For control options,
see page 101.
|
Lutron 22
|
roller shades overview
Illustrations to
scale—not
actual size
|
roller 20™ — page 25
roller 64™ — page 27
roller 100™ — page 29
Application
A slim profile and narrow
width ideal for shallow
residential window frames
Ideal for small- to
medium-sized windows
Designed for windows
approximately 10 ft.
(3,048 mm) wide. Allows
coupling capability for up
to six fabric panels.
Sound level
44 dBA
38 dBA
38 dBA
Tube size
(diameter of
tube only - no
shade fabric)
1.25 in.
(32 mm)
1.625 in.
(41 mm)
2.56 in.
(65 mm)
or wider
Lutron-provided
pocket size
3.5 in. w x 3.5 in. h
(89 mm w x 89 mm h)
3.5 in. w x 3.5 in. h
(89 mm w x 89 mm h)
4.75 in. w x 5.0 in. h
(121 mm w x 127 mm h)
Dual pocket size 6 in. w x 9 in. h
(page 26)
(152 mm w x 229 mm h)
6 in. w x 9 in. h
(152 mm w x 229 mm h)
7 in. w x 11 in. h
(178 mm w x 279 mm h)
Typical
maximum
shade size*
20 sq. ft.
(1.86 sq. m)
64 sq. ft.
(5.95 sq. m)
100 sq. ft.
(9.29 sq. m)
Minimum
bracket-tobracket width
18.5 in.
(470 mm)
18.5 in.
(470 mm)
24 in.
(610 mm)
Maximum
bracket-tobracket width
79.5 in.
(2019 mm)
97.5 in.
(2476 mm)
125 in.**
(3175 mm)
23 Lutron
* Maximum allowable shade size may vary based on fabric selection. Contact
customer service or use SCT for actual shade dimensions based on fabric type.
roller 150™ — page 29
roller 225™ — page 37
(QS and QS Wireless only)
roller 300™ — page 29
(QS and QS Wireless only)
Designed for tall and
coupled shades, when
the reduced speed of a
200CW is undesirable.
Allows coupling
capability for up to
six fabric panels.
Provides a heavy-duty
bracket and higher
torque for much larger
applications such as
atriums or multi-story
windows
Coupled shades and
building facades, up to
six 5 ft. x 10 ft. panels,
approximately 300 sq ft.
38 dBA
38 dBA
50 dBA
2.56 in.
(65 mm)
or wider
3.75 in.
(95 mm)
2.56 in.
(65 mm)
or wider
4.75 in. w x 5.0 in. h
(121 mm w x 127 mm h)
7 in. w x 7 in. h
(178 mm w x 178 mm h)
4.75 in. w x 5.0 in. h
121 mm w x 127 mm h)
7 in. w x 11 in. h
(178 mm w x 279 mm h)
8 in. w x 14 in. h
7 in. w x 11 in. h
(203 mm w x 356 mm h) (178 mm w x 279 mm h)
150 sq. ft.
(14 sq. m)
225 sq. ft.
(20.9 sq. m)
300 sq. ft.
(27.87 sq. m) cumulative
between all coupled panels
24 in.
(610 mm)
31.75 in.
26.5 in.
(806 mm)
(673 mm) coupled with spring
Greater with spring assist assist: 53.625
(1,362 mm)
125 in.**
(3175 mm)
190 in.
(4826 mm)
125 in.**
(4572 mm)
**With Integrated Deflection Reduction (WIDR) tube option allows for extra wide shades.
Battens may be required on shades over 150" wide. See pg. 36
|
Lutron 24
|
roller shades roller 20
™
System dimensions
The roller 20TM system utilizes a 1.25 in. (32 mm)
roller tube to operate up to 20 sq. ft. (1.86 sq. m)
of fabric.*
Universal bracket design
One-piece bracket for simple installation
- Same bracket for left and right side of roller tube
- Same bracket for ceiling, wall, and jamb mount
•
Roller tube installs with simple,
spring-loaded design
•
A
B
Front view
E
Dual-mount roller system
Install two fabric panels over the same
window with this compact bracket.
F
J
H
D
C
G
K
Dimensions
glass side
0.75 in. (19 mm) symmetrical, minimum
18.5 in. (470 mm) minimum
2.5 in. (64 mm)
0.18 in. (5 mm) minimum
1.65 in. (42 mm)
1.25 in. (32 mm)
|
25 Lutron
I
Dimensions
5.15 in. (131 mm)
3.5 in. (89 mm)
9 in. (229 mm)
6 in. (152 mm)
1.0 in. (25 mm)
* Maximum allowable shade size may vary based on fabric selection. Contact
customer service or use SCT for actual shade dimensions based on fabric type.
Standard snap-on end cap
Provide a clean look for a system
installed without fascia or top box.
Available in White.
Blackout configuration
Lutron offers side channels in a width
of 2.5 in. or 3.5 in. (64 or 89 mm) to
facilitate blackout conditions.
M
M
Fascia
roller 20 can be installed with a top/back cover
and fascia for a clean, minimal look. Square and
curved fascia and pockets are available in White,
Black, Bronze, and Anodized Aluminum.
Side view
Square fascia
Round fascia
top back cover
O
N
Front view
O
Dimensions
2.75 in. (70 mm)
M 3.5 in. (89 mm)
glass side
Fascia end caps
1.0 in. (25 mm)
2.5 in. (64 mm)
3.5 in. (89 mm)
Install side
channels backto-back at wide
center mullions.
1 in.
(25 mm)
x2
Lutron-provided pocket dimensions
roller 20 will never require more than 3.5 in. height
x 3.5 in. (89 mm x 89 mm) depth for installation.
Optional side
channel
L
M
Fabric
Sill angle
L
M
The sill angle
completes
the blackout by
stopping light leaks
below the shade.
Sill
Side view
ceiling
glass
|
Lutron 26
|
roller shades roller 64
™
System dimensions
The roller 64TM system utilizes a 1.625 in.
(41 mm) roller tube to operate up to
64 sq. ft. (5.95 sq. m) of fabric.*
Universal bracket design
One-piece bracket for simple installation
- Same bracket for left and right side of roller tube
- Same bracket for ceiling, wall, and jamb mount
•
Roller tube installs with simple,
spring-loaded design
•
A
B
Front view
D
E
Top view
Dual-mount roller system
Install two fabric panels over the same window
with this compact bracket system.
F
J
G
D
C
I
H
Dimensions
0.75 in. (19 mm) symmetrical, minimum
18.5 in. (470 mm) minimum
3.0 in. (76 mm) maximum
0.26 in. (7 mm) minimum
2.17 in. (55 mm)
1.67 in. (42 mm)
|
27 Lutron
glass
Dimensions
6.0 in. (152 mm)
9.0 in. (229 mm)
6.25 in. (159 mm)
3.9 in. (99 mm)
* Maximum allowable shade size may vary based on fabric selection. Contact
customer service or use SCT for actual shade dimensions based on fabric type.
Standard end cap
Provide a clean look for a system
installed without fascia or top box.
Available in White.
Blackout configuration
Lutron offers side channels in a width
of 2.5 in. or 3.5 in. (64 or 89 mm) to
facilitate blackout conditions.
K
K
Fascia
roller 64 can be installed with a top/back cover
and fascia for a clean, minimal look. Square and
curved fascia and pockets are available in White,
Black, Bronze, and Anodized Aluminum.
Side view
Square fascia
Round fascia
top back cover
top back cover
M
L
Front view
M
Dimensions
3.5 in. (89 mm)
1 in. (25 mm)
M 2.5 in. (64 mm)
3.5 in. (89 mm)
glass
Fascia end caps
M
M
1 in.
(25 mm)
Mx2
Lutron-provided pocket dimensions
roller 64 will never require more than 3.5 in. height
x 3.5 in. depth (89 mm x 89 mm) for installation.
Optional side
channel
K
Install side
channels backto-back at wide
center mullions.
Fabric
Sill angle
The sill angle
completes the
blackout by
stopping light leaks
below the shade.
Sill
K
Side view
ceiling
glass
|
Lutron 28
|
roller shades roller 100 , roller 150 , roller 300 with LIFT
™
™
™
™
System dimensions
These four systems utilize a 2.5 in. or 3 in. (64 mm
or 76 mm) roller tube as well as identical brackets.
Bracket design benefits
Brackets employ a two-piece design to
maximize ease and flexibility of installation.
The roller 100TM operates up to 100 sq. ft.
(9.29 sq. m) of fabric.*
Proprietary bracket designs for various
applications include:
• Wall mount
• Ceiling mount
• Jamb mount
The roller 150TM operates up to 150 sq. ft.
(14 sq. m) of fabric.*
The roller 300TM with Lutron Intelligent Façade
TechnologyTM (LIFT) operates up to 300 sq. ft.
(27.9 sq. m) of fabric*, controlling as many as
six shade panels from one drive.
Wall mount
A
B
Front view
Ceiling mount
C
Top view
D
E
C
Jamb mount
Dimensions
0.75 in. (19 mm) symmetrical, minimum
24 in. (610 mm) (minimum bracket-to bracket)**
4 in. (102 mm) maximum
4.43 in. (112 mm)
0.62 in. (16 mm) maximum projection
|
29 Lutron
* Maximum allowable shade size may vary based on fabric selection. Contact
customer service or use SCT for actual shade dimensions based on fabric type.
** Maximum bracket to bracket may vary depending on drive selected
Wall mount
Dimensions
F
G
4.43 in. (112 mm)
5.1 in. (130 mm) maximum
Note: shown
as regular roll
Ceiling mount
Dimensions
H
I
J
L
4 in. (102 mm) maximum
3.29 in. (84 mm)
0.15 in. (4 mm)
5.2 in. (132 mm) maximum
4.4 in. (112 mm)
K
Jamb mount
M
Dimensions
M 5.12 in. (130 mm) maximum
O
4.44 in. (113 mm)
4.65 in. (118 mm) maximum
Note: Fabric projection adjustable
0.5 in. (13 mm)
|
Lutron 30
|
roller shades roller 100 , roller 150 , roller 300 with LIFT
™
Bracket features
Shade centering and leveling
A benefit of the two-piece bracket design is the
ability to laterally adjust the roller shade after
installation to ensure a centered mounting.
Roller shade can also be leveled easily without
re-mounting the bracket.
™
™
™
Dual-mount bracket
A common roller shade application is the
use of two fabrics on one window, typically
a sheer and a blackout. Fabric unrolls
closest to glass. The dual mount uses
a two-piece bracket.
T
P
Level
adjustment
S
Q
R
Lateral adjustment
Dimensions
Projection adjustment
The bracket allows for projection adjustment
of the roller tube during and after installation.
(wall mount shown)
P 6.5 in. (165 mm)
11 in. (279 mm)
1 in. (25 mm)
8.22 in. (209 mm)
T 7 in. (178 mm)
Projection
adjustment
screws
|
31 Lutron
Up to 0.5 in. (13 mm)
projection adjustment
glass
Fascia and top back covers
Lutron roller shades can be installed within fascia
and top back covers. This two-piece enclosure
conceals the product and provides accessibility for
adjustment and maintenance. Square fascia and
pockets are available in White, Black, Bronze, and
Anodized Aluminum.
Pocket dimensions
Pockets are available for roller 100™, roller 150™,
and roller 300™ with LIFT™ systems. The pocket
mount uses a two-piece bracket.
Add side channels and sill angles to achieve
blackout conditions with opaque fabrics.
Fascia
Top back cover
Optional
end cap
V
Fascia and top/back cover with
side channel and sill angle (page 28)
W
The fascia mount uses a two-piece bracket.
U
ceiling
X
U
glass
Lutron pocket dimensions
V 4.75 in. (121 mm)
W 5 in. (127 mm)
T 3 in. (76 mm)
Dimensions
U 4.2 in. (107 mm)
Note: Fascia and top back cover can be used
independently of each other.
|
Lutron 32
|
roller shades roller 100 , roller 150 , roller 300 with LIFT
™
™
Blackout configuration
Lutron offers side channels in a width of
2.5 in. or 3.5 in. (64 or 89 mm) to facilitate
blackout conditions.
™
™
In-line coupled roller system
Up to six shade panels can be coupled,
allowing for the entire assembly to be powered
by a single electronic drive unit (EDU).
S
H
T
Side view
V
U
Front view
V
Dimensions
•
4.75 in. (121 mm)
Pocket dimensions
shown including
side channels
T 5 in. (127 mm)
U 1 in. (25 mm)
V 2.5 in. (64 mm)
3.5 in. (89 mm)
V
V
V x2
Fabric
Sill angle
Sill
|
33 Lutron
Install side
channels backto-back at wide
center mullions
1 in.
(25 mm)
Optional side
channel
Side view
Simple installation—no pins needed
Increased efficiency by operating multiple shades
with one EDU
•
Offers 1.5 in. (38 mm) minimum light gap
between panels
•
Can be assembled with any bracket configuration
(see page 34)
•
Offers phase adjustment, which allows the
bottom bars to be aligned after installation
• Allows precise bottom bar alignment
•
The sill angle
completes the
blackout by
stopping light leaks
below the shade.
Note: Drive side minimum width per coupled
shade 26.5 in. (673 mm)
Coupling adjustment
Use an Allen wrench to align bottom bars
while shades are in place. Use set screws
to adjust alignment.
Coupling sub-brackets
Wall-mount coupling sub-bracket
Fascia-mount coupling sub-bracket
Dimensions
2.0 in. (51 mm)
Dimensions
3.0 in. (76 mm)
6.16 in. (156 mm)
4.04 in. (103 mm)
Ceiling-mount coupling sub-bracket
Pocket-mount coupling sub-bracket
(Top view)
Dimensions
2.0 in. (51 mm)
Dimensions
3.08 in. (78 mm)
8.48 in. (216 mm)
4.17 in. (106 mm)
Jamb-mount coupling sub-bracket
Universal dual narrow sub-bracket
Dimensions
Dimensions
3.75 in. (95 mm)
3.31 in. (84 mm)
8.25 in. (209 mm)
4.22 in. (107 mm)
|
Lutron 34
|
roller shades angled coupler
45˚
0˚– 45˚ Angled coupler
Allows up to 45˚ angle
Angled coupler
Removes need for multiple shade drives in angled
applications — resulting in significant cost reduction.
No commitment to shade angle when ordering;
one size fits all angles, 0˚–15˚ or 0˚– 45˚.
Angled coupler parameters:
• Ceiling- and pocket-mount capable
• Maximum angle: 45˚ (22.5˚ each side)
•
Maximum number of shades: three
(per roller 100™ or roller 150™)
• Minimum drive side panel width: 25.5 in. (648 mm)
• Minimum non-drive side panel width: 22.5 in. (572 mm)
Angled coupler template
New measuring template for angled shades
ensures precise and easy installation.*
Plastic angled coupler templates can be ordered
through Customer Service:
• 0˚–15˚ Narrow Angle Coupler Template (p/n 045-315)
• 0˚– 45˚ Wide Angle Coupler Template (p/n 045-318)
regular roll
|
35 Lutron
reverse roll
Shade
angle
(total)
Regular roll
light gap
Reverse roll
light gap
0˚
1 5/16 in. (33 mm)
1 5/16 in. (33 mm)
2˚
1 5/16 in. (33 mm)
1 1/4 in. (32 mm)
4˚
1 5/16 in. (33 mm)
1 1/4 in. (32 mm)
6˚
1 3/8 in. (35 mm)
1 1/4 in. (32 mm)
8˚
1 3/8 in. (35 mm)
1 3/16 in. (30 mm)
10˚
1 7/16 in. (35 mm)
1 3/16 in. (30 mm)
12˚
1 7/16 in. (35 mm)
1 3/16 in. (30 mm)
14˚
1 7/16 in. (35 mm)
1 1/8 in. (29 mm)
16˚
1 1/2 in. (38 mm)
1 1/8 in. (29 mm)
18˚
1 1/2 in. (38 mm)
1 1/8 in. (29 mm)
20˚
1 1/2 in. (38 mm)
1 1/16 in. (29 mm)
22˚
1 9/16 in. (40 mm)
1 1/16 in. (29 mm)
24˚
1 9/16 in. (40 mm)
1 1/16 in. (29 mm)
26˚
1 5/8 in. (41 mm)
1 in. (25 mm)
28˚
1 5/8 in. (41 mm)
1 in. (25 mm)
30˚
1 11/16 in. (43 mm) 1 in. (25 mm)
32˚
1 11/16 in. (43 mm) 1 in. (25 mm)
34˚
1 11/16 in. (43 mm) 15/16 in. (24 mm)
36˚
1 3/4 in. (44 mm)
15/16 in. (24 mm)
38˚
1 3/4 in. (44 mm)
15/16 in. (24 mm)
40˚
1 3/4 in. (44 mm)
7/8 in. (22 mm)
42˚
1 13/16 in. (46 mm) 7/8 in. (22 mm)
44˚
1 13/16 in. (46 mm) 7/8 in. (22 mm)
45˚
1 13/16 in. (46 mm) 13/16 in. (21 mm)
0˚–15˚ Angled coupler
(use where possible to minimize light gaps)
Shade
angle
(total)
Regular roll
light gap
Reverse roll
light gap
0˚
7/8 in. (22 mm)
7/8 in. (22 mm)
2˚
7/8 in. (22 mm)
13/16 in. (21 mm)
4˚
7/8 in. (22 mm)
13/16 in. (21 mm)
6˚
15/16 in. (24 mm)
13/16 in. (21 mm)
8˚
15/16 in. (24 mm)
3/4 in. (19 mm)
10˚
1 in. (25 mm)
3/4 in. (19 mm)
12˚
1 in. (25 mm)
3/4 in. (19 mm)
14˚
1 in. (25 mm)
11/16 in. (17 mm)
15˚
1 in. (25 mm)
11/16 in. (17 mm)
* Template must be used to provide final measurements for ordering.
|
roller shades WIDR tube option
With Integrated Deflection Reduction (WIDR)
Tube cross-section
(not actual size)
Longer window span for roller 100™, roller 150™,
and roller 300™ shades:
•
Allows for shades up to 180 in. (4572 mm) wide with
minimal deflection. Battens may be required.
• Reduced waves and Vs in fabrics
• Utilizes all existing roller 100 bracket and top-treatment options
• Utilizes coupling systems for extra wide coupled shades
•
Tube diameter = 3.0 in. (78 mm) vs. standard roller 100
= 2.5 in. (63.5 mm)
WIDR tube has a larger and stronger cross-section to prevent
deflection over standard tube options. It allows for wider shades
to be mounted in residential- and commercial-sized pockets,
while maintaining the quiet precision of Lutron electronic
drive technology.
Dimensions:
Tube diameter: 3.0 in. (78 mm)
•
Pocket size: 4.75 in. x 5.00 in.
(121 mm x 127 mm) standard pocket
• Typical max. size: 100 sq.ft. (9.29 sq. m)
• Min. bracket to bracket width: 24 in. (610 mm)
• Max. bracket to bracket width: 15 ft. (4572 mm)
standard tube
•
WIDR tube
•
•
WIDR tube parameters:
Widest shade: 15 ft. w (4572 mm)
Longest shade: 15 ft. h (4572 mm)
Typical shade: 12 ft. w x 8.33 ft. h
(3658 mm x 2539 mm)
• Minimum system width: 2 ft. w x 2 ft. h
(610 mm x 610 mm)
•
* Note: Some top treatments may be unavailable.
|
Lutron 36
|
roller shades roller 225
™
System dimensions
The roller 225™ provides a heavy-duty bracket
and higher torque for large applications such
as atriums or multi-story windows.
The roller 225 system:
• Utilizes a 3.75 in. (95 mm) diameter tube
•
Employs heavy duty brackets designed for
larger systems
A
B
Front view
roller 225
bracket assembly
C
Dual-mount bracket
A common roller shade application is the
use of two fabrics on one window, typically
a sheer and a blackout. Fabric unrolls
closest to glass. The dual mount uses
a two-piece bracket.
C
Top view
C
D
E
Dimensions
0.75 in. (19 mm) symmetrical, minimum*
31.62 in. (803 mm) typical minimum
6 in. (152 mm)
1.13 in. (29 mm) maximum
projection into room
5.25 in. (133 mm)
* May be smaller with spring assist.
|
37 Lutron
GLASS/ WALL SIDE
Dimensions
7.07 in. (180 mm)
7.61 in. (193 mm)
11.48 in. (192 mm)
Pocket installation*
Lutron recommends a 7 in. x 7 in.
(178 mm x 178 mm) pocket for
recessed installations.
Blackout configuration (pocket only)
Lutron offers side channels in a width of
2.5 in. or 3.5 in. (64 or 89 mm) to facilitate
blackout conditions.
I
J
JH
I
Side view
Front view
L
Dimensions
Dimensions
L
K
glass
7 in. (178 mm)
Dual pocket installation*
Lutron recommends an 8 in. x 14 in.
(203 mm x 356 mm) pocket for
recessed dual installations.
7 in. (178 mm)
1 in. (25 mm)
2.5 in. (64 mm)
3.5 in. (89 mm)
Pocket dimensions
shown including
side channels.
Install side
channels backto-back at wide
center mullions.
1 in.
(25 mm)
x2
Optional side
channel
Fabric
Sill angle
glass
The sill angle
completes the
blackout by
stopping light leaks
below the shade.
Sill
Side view
* Pocket available. See pages 39 – 40.
|
Lutron 38
|
roller shades large pocket
Large pocket is available in the following sizes for all dual applications (for use
with Lutron dual pocket brackets) and large single applications. Available with
splice bar, flap, hanger, air vents, and ceiling tile support.
6 in. w x 9 in. h
(152 mm x 228 mm)
for dual roller 20™
and dual roller 64™
applications
8 in. w x 14 in. h
(203 mm x 356 mm)
for dual roller 225™
applications
7 in. w x 11 in. h
(178 mm x 279 mm)
for dual roller 100™,
dual roller 150™, and
dual roller 300™ LIFT™
applications
7 in. w x 7 in. h
(178 mm x 178 mm)
for single roller 225
applications
12 in. w x 6 in. h
(305 mm x 152 mm) for horizontal dual roller
100, dual roller 150, and dual roller 300 LIFT
applications (dual flap available)
|
39 Lutron
|
roller shades custom pocket
Custom pockets are available in a wide variety of
user-specified sizes for any application.
T
All custom and dual pockets are available with splice bar
(allows for multiple pocket alignment), integrated air vents,
tile support (for ceiling tile integration), and flap and hanger
(three flap sizes available).
All custom and dual pockets are 0.06 in (1 mm) thick.
Note:
Pocket size (linear dimension) cannot exceed 46 in.
(1,168 mm) [2X+Y]. Maximum continuous length is 120 in.
Minimum dimension is 5.5 in. (X) by 5.5 in (Y)
T
T
Optional flap and hanger
flap sizes available:
2 in. (51 mm)
3 in. (76 mm)
5 in. (127 mm) (recommended only for pockets 8 in. deep or larger)
ceiling tile
tile support
Optional splice bar
for multiple pocket alignment
Optional air vents
24 sq. in. per linear foot
(154.8 sq. cm)
Optional tile support
for integration with ceiling tile
|
Lutron 40
|
roller shades cable-guided shades
Cable-guided shades allow shading with angled windows
and management of shade “sway” within areas of high
velocity airflow.
Allows for up to 20˚ angles (positive and negative)
•
Maximum shade height of 20 ft. (6096 mm)
•
F
or use with architectural bottom bars or
oval hembars
•
R
etrofit kit available for existing shades with
architectural bottom bar
•
Compatible with wall, ceiling, and jamb-recessed brackets
•
Cable thickness: two sizes available
•
Marine-grade stainless steel turnbuckle and stainless steel
cable mounting brackets
•
Cables are nylon-coated galvanized steel with stainless
steel threaded ends
•
20˚
|
41 Lutron
20˚
|
roller shades manual shades
Lutron is ready to address all of your commercial shading needs. Roller clutch
manual shades allow for one-name specification on projects that incorporate
motorized shading but also require manual solutions.
Each size refers to pounds of fabric weight. Clutch system allows for minimal effort
when lifting heavy fabric panels while maintaining shades at desired positions.
Multiple tube sizes are available to manage
deflection in wide shades:
• 1 in. (25 mm) steel tube: Available with V8
• 1.375 in. (35 mm) steel tube: Available with V16 and V24
• 1.75 in. (44 mm) steel tube: Available with V16 and V24
• 2 in. (51 mm) aluminum tube: Available with V16 and V24
•
2.5 in. (64 mm) aluminum tube: Available with V24
Compatible with fascia and pocket mount applications.
Chain tensioner device standard.
Clutch size
V8
V16
V24
V24 with spring assist
V8
Capacity
8 lbs. (3.6 kg)
16 lbs. (7.3 kg)
24 lbs. (10.8 kg)
30 lbs.(13.6 kg)
V16
V24
spring
assist
|
Lutron 42
|
roller shades applications
Small- to medium-sized windows —
pages 25 and 27
roller 20™ and roller 64™ have small tube
diameters that make them the perfect
solution for small- to medium-sized
windows. Control daylight and create
privacy in the office or at home.
Curtain walls — page 29
Couple up to six shades as a single group with
a single EDU with roller 150™.
Roller 300™ with LIFT™ allows for operation of
up to six 5 ft. x 10 ft. panels without the need
for coupling.
Wide windows — page 36
WIDR tube option designed to minimize
deflection for wide windows with average height.
Optional tube size for roller 100, roller 150, and
roller 300.
Floor-to-ceiling windows — page 29
roller 100™ is designed for larger windows,
such as those in floor-to-ceiling applications.
These windows are often found in offices
and condominiums. Preserve the view while
increasing productivity.
Multi-story windows — page 37
roller 225™ provides a heavy-duty bracket and
higher torque for much larger applications. Add
precision control of daylight in atriums, lobbies,
and in areas with multi-story windows.
Note: Roller tubes not shown actual size.
|
43 Lutron
|
Sivoia QS Hyperion
®
®
|
Lutron 44
Hyperion
®
| commercial total light control
Total light control solutions
Products*
Basic stand-alone
solutions
These solutions operate independent of one
Maestro® occupancy
another. They are the simplest and lowest-cost way sensor
to start saving energy today.
Single-space
solutions
These solutions—occupancy sensors, daylight
sensors, and infrared or radio-frequency remote
controls—add the ability to control several lights
together.
Maestro Wireless®
dimmer, Pico® wireless
control, Radio Powr
Savr™ daylight sensor,
Radio Powr Savr
occupancy sensor,
plug-in lamp dimmer,
Sivoia® QS shades
Small area solutions
For more advanced and scalable light and shade
control, use Lutron QS components to build wired
or wireless mini-systems.
GRAFIK Eye® QS,
EcoSystem® ballast,
Sivoia QS shades
These mini-systems can be easily expanded at
any time to control multiple rooms or larger spaces
and are suitable for both new construction and
retrofit applications.
Entire floor solutions QS devices can easily be linked across multiple
Energi Savr Node™ QS,
rooms—up to an entire floor—to provide significant seeTouch® QS keypad,
yearly savings from ongoing reduced energy costs, Sivoia QS shades
increased lamp life, and lower maintenance costs.
This highly scalable solution can be easily
reconfigured, with no need for rewiring.
Entire building
or campus solutions
|
45 Lutron
Quantum® manages both daylight and electric light
by integrating light and shade control devices. With
Quantum, facility managers can maximize energy
efficiency, comfort, and productivity, as well as
configure, monitor, analyze, and report on the light
in an entire building—all from a central location.
*F
or more information on Lutron lighting control and
total light control products, visit www.lutron.com.
Quantum hub, Quantum
GreenGlance®,
Hyperion® system,
Sivoia QS shades
Hyperion
®
| system overview
What is Hyperion®?
Hyperion is an automated shading system
that adjusts Sivoia® QS shades throughout the
day based on the sun’s position. It maximizes
functional daylight in a space while minimizing
glare and solar heat gain to create a comfortable
work environment.
Seasonal solar variation:
The position of the earth relative to the sun
changes throughout the year. Consequently,
the sun will be in a different position at noon on
June 21st than it is at noon on December 21st.
Hyperion effectively manages daylight entering
the space by incrementally changing the shade
adjustment schedule of each façade on a daily
basis, maximizing comfort and productivity.
Hyperion can function as a stand-alone system
or as a key feature of the Quantum® Total Light
Management™ system.
How does Hyperion work with Quantum?
Quantum is a lighting control system that has
the ability to manage total light levels in response
to available daylight. By combining Hyperion’s
effective daylight management with Quantum’s
daylight harvesting capabilities, electric light usage
can be lowered to conserve electricity every day.
What are the benefits?
Increase comfort and productivity
Preferred light levels and automated shade control
are conducive to a productive work environment.
Create a more flexible space
Shade groups easily re-configure to allow for flexible
use of a space without rewiring. Each group can be
tuned to meet specific daylight needs.
Save electricity and protect the environment
Reduce greenhouse emissions by eliminating
unnecessary energy use.
Save money
Lower operating costs with Hyperion’s minimal
maintenance requirements and through electricity
savings with daylight harvesting and reduced
HVAC costs.
Example:
A 50,000 sq. ft. commercial building
spends about $45,000 each year on
lighting energy. Much of that money is wasted due to ineffective
light control. Through the optimization of electric
light and daylight, Quantum and Hyperion can
cut lighting costs by 60% or more while greatly
improving the visual environment.
|
Lutron 46
Hyperion
®
| system components
Quantum components
®
Key components
Hyperion® solar-adaptive shading is powered by
the Quantum Total Light Management™ system.
Sivoia QS
daylight controls
Electronic drive unit (EDU)
Through Hyperion, Quantum uses Sivoia® QS
shades to create a dynamic shading system for
the entire building.
The Hyperion shading system is set up, tuned,
and controlled using Q-Admin™ software.
Quantum’s BACnet® capabilities also allow a building
automation system to control and monitor the shades.
Quantum works with Lutron dimming ballasts to
maximize usable daylight and minimize electric
lighting load.
Q-Admin software
• Used on PC to control
and monitor Quantum
Sivoia QS roller shades
Reduce glare and solar heat gain
for increased productivity, comfort,
and energy savings while preserving
views
• EDU quietly controls shades with
ultra-precise alignment
• QS Smart Panel
Power Supply
• Provides low voltage
power to shades
and accessories
Quantum hub
• Connects all Quantum system
components and powers Hyperion
NEW Hyperion Power Panel
• Combines a Hyperion processor
and a shade power panel into
one product, providing a simple
and low-cost solution for adding
Quantum to shade jobs
(Optional) Radio WindowTM sensor
• Enables an override to Hyperion
shade movement when a cloudy
day condition is present.
|
47 Lutron
Lutron fabrics
seeTouch QS
wall keypads
®
For reliable daylight control that enhances a
room’s décor, Lutron provides a superior
selection of roller shade fabrics.
Categories:
•
Sheer: daylight is filtered while preserving view
•
Translucent: permits some light, but view is
limited to shapes and shadows
• Blackout: prevents all light from passing
through the material. Combine with side
channels, top treatments, and other
components for a complete light seal,
when necessary.
Fabrics are available for any application and
every price range.
Wall keypads
•
Select a preferred light level
for every task, and adjust
shades quietly at the touch
of a button
Use of local keypads can
provide occupants with the
ability to override the Hyperion®
schedule and further reduce
glare as needed
•
|
Lutron 48
Hyperion
®
| example
June 21st | 11:00 a.m.
Hyperion® automatically positions
shades to let useful daylight into the
space. Lights near windows dim to
save energy.
December 21st | 11:00 a.m.
Shades remain partially closed to
block harsh low-angled winter sun.
Lights near windows remain bright
to maintain preferred light levels.
|
49 Lutron
|
Sivoia QS/Sivoia QS Wireless tensioned shades
®
|
Lutron 50
|
tensioned shades system selection process
Determine how
tensioned shade
will be installed
Take
system
measurements (page 57)
Specify
drive location
for pre-wiring
Mounting options (page 54)
Tensioned shade system size
pL
eft drive
p Inside mount
System width = ____________
p Recessed mount
pR
ight drive
System length = _____________
(System includes frame
and shade.)
p TBD
p Surface mount
Angle of installation (page 53) Typical maximum system size
is 70 sq. ft. (6.5 sq. m).*
= _________________ degrees
_________________
Specify wiring topology
p Individual transformers
(recommended for installations
requiring local wiring)
Meet-in-the-middle tensioned
(custom)
pP
ower panel
(recommended for installations
System width = ____________
requiring centralized wiring)
System height = _____________
Typical maximum system size
is 140 sq. ft. (13 sq. m).*
* Maximum system size
may vary based on
fabric selection. Contact
Customer Service for actual
system size dimensions
based on fabric type.
|
51 Lutron
Specify fabric
roll detail
Fabric drop
p Regular
glass
Roller location
p Top (shade closes
from top to bottom)
p Bottom (shade closes
from bottom to top)
Specify fabric
Specify lineal
requirements
p Sheer
These fabrics feature open
weaves, so sunlight is filtered
while preserving the view
Frame and fascia
metal color:
p Translucent
These fabrics permit some
light, but are not open
weaves, so the view is limited
to shapes and shadows
p Custom:
p Blackout
These fabrics prevent all light
from passing through the
material
Note: To ensure system stability,
only fiberglass-based fabrics
are available. Refer to the SCT,
Lutron website, or contact
Customer Service for details.
p Clear Anodized
p White
_________________
Assembly:
p Pre-assembled*
(ships as a complete
product)
p Customer
assembled (ships
as components)
See page 101 for
control options.
* Available for shade sizes
up to 30 sq. ft. (2.8 sq. m)
|
Lutron 52
|
tensioned shades system overview
Angles of installation
Lutron tensioned shades allow
for flexible installation at any angle
between -135º and 135º with
consistent aesthetic results. Shade
can close from top to bottom, or
from the bottom up, with fabric
unrolling closest to the window.
Angled shades
Angled shades
90°
Angled shades/
Tensioned shades
135°
45°
Tensioned
shades
0°
-135°
Bottom-up shades
-90°
Bottom-up shades
2 ft. (610 mm)
System parameters*
This chart illustrates dimensions of the
tensioned shade system. System contains
frame and shade.
-45°
Tensioned shades/
Bottom-up shades
Drive side (top)
3 ft.
(914 mm)
Minimum system size: 2 ft. wide x 3 ft. long (610 mm x 914 mm)
24 ft.
(7315 mm)
Maximum system size:
8 ft. wide x 24 ft. long†
(2438 mm x 7315 mm)
Frame thickness:
Drive side: 4.65 in. (118 mm)
Non-drive sides: 2.25 in. (57 mm)
†24 ft. is only achieved as a “Meet-in-the-middle”
custom configuration with two systems.
Contact Shading Quotes for details.
|
53 Lutron
8 ft. (2438 mm)
*Tensioned shade dimension limitations are a function of fabric selection and application
angle. Please consult the SCT or Customer Service for details.
|
tensioned shades mounting options
Mounting options
Lutron tensioned shades can be installed inside of, recessed into, or on
the surface* of the skylight or window opening.
Skylight cross-section
Inside mount
(standard)
Recessed inside mount
(new construction)
Surface mount (ceiling)*
(ideal for retrofit)
ceiling
Skylight and window room view
Inside mount
Recessed inside mount
Frame specifications
System is concealed within its frame.
Frame thickness and depth remain
the same regardless of system size.
Pre-assembled shipping available*.*
Available in White, Clear, Anodized
Aluminum, or custom colors.
Surface mount (ceiling)*
4.75
in.
4.75 in
(121
(XXmm)
mm)
Drive side
Side
Drive
Meet-in-the-middle
4.65
4.65 inin.
(XX mm)
(118
mm)
2.25
2.25 inin.
(XX mm)
(57
mm)
2.25
2.25 inin.
(XX mm)
(57
mm)
* Surface mount recommended for skylight applications only.
**For shade sizes up to 30 sq. ft. (2.8 sq. m).
|
Lutron 54
|
tensioned shades mounting options
Mounting options
Cross-section
Inside mount
glass
4.75 in.
(121 mm)
Recessed mount
glass
4.6 in.
(118 mm)
2.25 in.
(57 mm)
Surface mount (ceiling)*
glass
4.6 in.
(118 mm)
|
55 Lutron
4.6 in.
(118 mm)
* Surface mount is only applicable with skylight applications.
2.25 in.
(57 mm)
Bottom-up shades
Inside mount
glass
2.25 in.
(57 mm)
4.6 in.
(118 mm)
4.75 in. (121 mm)
Recessed mount
glass
2.25 in.
(57 mm)
4.6 in.
(118 mm)
4.75 in. (121 mm)
|
Lutron 56
|
tensioned shades measuring instructions
Measuring for inside mount tensioned shades
1 Measure the opening width at each end and the center ( 1 2 3 ), where the
frame will be mounted.
NOTE: For sloped ceilings, mount the roller at the top of the opening.
2 Measure the opening length at each end and the center ( 4 5 6 ), where the
frame will be mounted.
3 Measure each diagonal ( 7 8 ) dimension of the opening.
4 Order the shade using the following formula to make sure the frame fits
in the opening.
Frame Width = (Minimum measured width) - (Maximum diagonal-Minimum diagonal)
2
Frame Length = (Minimum measured length) - (Maximum diagonal-Minimum diagonal)
2
Example: Skylight well measuring
1
For this opening, order a tensioned shade
with the following dimensions:
28 in. (711 mm)
Width of skylight well
Frame Width =
28 in. - (47.75 in. - 47.25 in.) = 27.75 in.
2
5
38.2 in. (971 mm)
4
6
38.5 in. (978 mm)
Length of
skylight well
2
28 in. (714 mm)
8
7
47.25 in
(1200 mm)
47.75 in.
(1213 mm)
3
28 in. (714 mm)
|
57 Lutron
38.2 in.
(971 mm)
Frame Length =
38.2 in. - (47.75 in. - 47.25 in.) = 37.95 in.
2
Recessed mount measuring instructions
Section view of shade length
Section view of shade width
A
B
A
D
E
F
C
D
G
Dimensions
2.24 in. (57 mm)
Opening width
Dimensions
Frame width
(=
+ 4.5 in. [114 mm])
4.65 in. (118 mm)
2.24 in. (57 mm)
Opening length
Frame length
(=
+ 6.9 in. [175 mm])
Surface mount measuring instructions
Section view of shade length
Section view of shade width
A
B
A
D
F
C
G
Dimensions
Dimensions
2.24 in. (57 mm)
4.65 in. (118 mm)
Opening width
2.24 in. (57 mm)
Opening length
Frame length
Frame width
(=
+ 4.5 in. [114 mm])
E
(=
+ 6.9 in. [175 mm])
|
Lutron 58
|
tensioned shades measuring instructions
Inside mount measuring instructions
Section view of shade length
Dimensions
4.65 in. (118 mm)
2.24 in. (57 mm)
Opening length
Frame length
(
glass
for inside mount)
=
Pocket/recessed mount
measuring instructions
Section view of shade length
Dimensions
4.65 in. (118 mm)
2.24 in. (57 mm)
Opening length
Frame length
(=
|
59 Lutron
+ 6.9 in. [175 mm])
glass
|
Sivoia QS/Sivoia QS Wireless drapery track
®
|
Lutron 60
|
drapery track system selection process
Determine how
drapery track
will be installed
Mounting conditions
p Wall mount
Take
system
measurements
Determine
capacity
Track length*† (inches)
= __________________
p Ceiling mount
p Recessed mount
Track shape (page 68)
p Straight
* Estimated opening
size is approximately 2/3 of
length of track
left or right stack
†
p Bend
system width
stimated stack back is
E
approximately 1/3 of length
of track
each stack
= approx 1/6
(system width)
stack= approx 1/3
(system width)
left or right stack
Track type (page 67)
system width
Left or right
stack**
p Single
p Dual
stack =
approx.
1/3
stack= approx
1/3
(system width)
system
width
p Tandem
p Dual/Tandem
Draw type
left or right stack
p Center draw
p Right draw
system width
split-draw center stack
system width
Split-draw
center stack
p Left draw
Drive side
stack= approx 1/3
(system width)
each stack
= approx 1/6
(system width)
p Right
p Left
each stack = approx.
1/6 system width
** Refer to SCT for exact
opening size and stack back
|
61 Lutron
System measurements
will determine required
drapery capacity
split-draw center stack
system width
p Curve
Drapery weight (lbs.)
= __________________
System capacity (page 75)*
p D105 (105 lbs.)
p D145 (150 lbs.)
split-draw
center(175
stack lbs.)
p D175
system width
(QS and
QS Wireless only)
* Capacities
required depend
each stack
= approx 1/6
(system
width)
upon drape weight, track shape
(bend radius), and track length
Specify
track requirements
Specify
optional features
Pleat style
Track splicing (page 69)
p Pinch pleat
p One splice
p Ripplefold*
(ships in two sections)
Specify
fabric
p Avant Collection®
(see page 136 for
more information)
p Two splices
Fullness
(Ripplefold only)
(ships in three sections)
p 120%
p Manual override carrier*
(page 70)
Available in pinch pleat
or ripplefold
Track metal color
(bracket color to match)
* Manual override carrier
operates on drapery panels
weighing up to 70 lbs (31.7 kg).
p 80%
p 100%
p Bronze
p Clear Anodized
p Customer's Own Material
(COM)
(see page 143 for
more information)
See page 101 for
control options.
p White
p Custom __________________
* Ripplefold curved tracks require custom review.
|
Lutron 62
|
drapery track system overview
System overview
•
Provide privacy with elegant draperies of any
color and fabric (including customer-supplied)
•
One-touch control of individual or groups of
draperies to fully open, fully close, or move to
preset positions
•
Integrates seamlessly with other Lutron systems
•
Patented technology eliminates noise in tracks
•
Left draw, right draw, split draw and curved
systems available
Brackets
Drapery track systems can be mounted to the
wall or to the ceiling. The track is predrilled
with mounting holes for recessed mount
applications. Holes are spaced at 16 in.
(406 mm) intervals from the track center.
Ceiling mount bracket
1.2 in.
(31 mm)
1.25 in.
(32 mm)
2.06 in.
(52 mm)
3.3 in.
(84 mm)
8.88 in.
(226 mm)
|
63 Lutron
10.63 in.
(270 mm)
Ceiling mount bracket exploded view
Ceiling mount bracket — recessed with wood screw
2 in. (51 mm)
Pocket
1.5 in. wood screw
Structural member
Recessed mounting bracket
Recessed pocket
Drapery track
1.0625 in.* (27 mm)
pocket depth
2 in. (51 mm)
minimum pocket width
Ceiling mount bracket — recessed with drywall anchor
3 in. (76 mm) drywall anchor screw
Drywall anchor
0.5 in. (13 mm) hole
Drywall
Recessed mounting bracket
16 in (406 mm) pocket
Recessed
16 in (406 mm)
18 ¾8 in (467 mm)
Drapery track
7 ¾8 in (187 mm)
7 ¼ in (184 mm)
1.0625 in.* (27 mm)
pocket depth
2 in. (51 mm)
minimum pocket width
* 1.0625 in. (27 mm) depth provides complete concealment of the track
while maintaining proper clearance for the drapery.
|
Lutron 64
|
drapery track system overview
Wall mount bracket (side view)
4.25 to 6.75 in.
(108 to 172 mm)
1.625 in.
(41 mm)
1.2 in.
(31 mm)
wall
1.25 in.
(32 mm)
9.6 in. (244 mm)
Dual wall mount bracket (minimum extension)
9.6 in. (244 mm)
4.6 in.
(117 mm)
4.6 in.
(117 mm)
1.7 in.
(43 mm)
1.7 in.
(43 mm)
1.2 in.
(31 mm)
1.2 in.
(31 mm)
3.5 in. (89 mm)
3.5 in. (89 mm)
9 in. (229 mm)
wall
9 in. (229 mm)
Dual wall mount bracket (maximum extension)
12.1 in. (307 mm)
12.1 in. (307 mm)
4.6 in.
(117 mm)
4.6 in.
(117 mm)
wall
1.2 in.
(31 mm)
1.2 in.
(31 mm)
6 in. (152.4 mm)
6 in. (152.4 mm)
11.5 in. (292.1 mm)
11.5 in. (292.1 mm)
|
65 Lutron
1.7 in.
(43 mm)
1.7 in.
(43 mm)
|
drapery track mounting options
Straight track mounting options
Specify left draw, right draw, or center
draw drapery track options.
Track configuration
Track width (application dependent
18 ft. [5486 mm] maximum)*
Left draw/left-mounted EDU
10.6 in.
(270 mm)
8.89 in.
(226 mm)
3.3 in. (84 mm)
Right draw/right-mounted EDU
Track width (application dependent
18 ft. [5486 mm] maximum)*
Split draw, left- or right-mounted EDU
Track width (application dependent
18 ft. [5486 mm] maximum)*
Tandem draw, left- and right-mounted EDUs
Track width (application dependent
36 ft. [10.97 m] maximum, 60 ft. [18.3 m] with splice)
Note: Valance and drapery not included
* 30 ft. (9 m) maximum with splice
|
Lutron 66
|
drapery track system installation
Single drapery track system
Maintain enough clearance between the drapery track and the inside face of
the top treatment or ceiling recess to allow the fabric to move freely.
Dimensions*
11.25 in. (286 mm)
3.5 in. (89 mm)
2.5 in. (64 mm)
1 in. (25 mm)
(wall mount shown)
Dual drapery track system
Lutron drapery tracks can be used for a combination
sheer/blackout treatment.
Dimensions*
11.25 in. (286 mm)
3.5 in. (89 mm)
2.5 in. (64 mm)
1 in. (25 mm)
5.5 in. (140 mm)
(wall mount shown)
Single, tandem drapery track system
The accuracy of movement and speed control of the drapery track
system allows two independent systems to be used to create a
center draw drape.
(wall mount shown)
Corner application
Drapery tracks can be used in corner applications.
|
67 Lutron
* Measurements listed are minimums.
Note: Drapery tracks utilize an external Electronic drive unit.
Dimensions*
11.25 in. (286 mm)
3.5 in. (89 mm)
2.5 in. (64 mm)
1 in. (25 mm)
|
drapery track curved
Lutron curved drapery tracks
In addition to straight tracks, Lutron offers its
ultra-quiet drapery system for curved applications.
The system provides the same smooth movement,
all preset capabilities, and robust performance as it
does for straight tracks.
Curved tracks are available in a standard arc or by
custom specifications
- Standard arc: 90° bend with 20 in. (0.5 m) radius
- Custom: up to 90° bends are possible; curved
radius must be greater than 20 in. (0.5 m)
•
Center draw and single draw versions are available.
•
Order process:
1.Submit quote requistion through SCT or contact
trained dealer.
2.Your representative will provide you with detailed
instructions for laying out an exact template of
the track.
3.Upon order, ship the project template to
our factory along with your custom job number.
4.Your track order will be processed, and your
custom-curved track will ship after production.
Note: Standard 90°, single-bend curved tracks
are available in the SCT.
See charts on pages 75 –77 for weight capacities
of single-bend, drapery track systems. Please
contact Customer Service with specific requests.
Curve
D105, D145, or D175*
Bend
D105, D145, or D175*
Double-bend system can be created
with tandem single-bend systems.
Double curve**
D145 or D175*
Double curve tracks will typically incorporate a splice
along a middle straight section for ease of shipping.
Double bend**
D145 or D175*
splice
splice
Double-bend tracks will typically incorporate a
splice along the middle straight section for ease
of shipping.
* D175 is QS and QS Wireless only.
** Requires 16 in. (406 mm) straight section for splice.
|
Lutron 68
drapery track
| track splicing
Track splicing is available on finished systems and
is a convenient solution for shipping and installing
long drapery tracks.
Spliced drapery tracks are shipped from the factory
in multiple sections (two equal sections with one
track splice, or three equal sections with two
track splices) and are easily reconnected at the
installation site using a splice bar.
Benefits:
Track maintains quiet operation
•
Splice bar allows track to be easily reconnected
and ensures a virtually invisible seam
• Allows for:
- Longer standard track lengths — up to 30 ft.
(9,144 mm), up to 60 ft. (18,288 mm) for
spliced, tandem systems
- Shorter packaging and easier transportation of
the tracks into and within the installation site
•
1. Track arrives in equal sections with a splice bar and Allen wrench.
2. Sections slide together and are secured with splice bar.
3. T
ightening splice bar screws aligns and joins the two track pieces.
Track is spliced together and ready for installation.
|
69 Lutron
drapery track
| manual override carrier
The drapery track system is available with a
manual override carrier.* When manual force
is applied to the drapery, the master carrier
releases, allowing the drapery to open.
The patented Lutron spring release system is
field-adjustable to customize the amount of
force necessary to manually open the drapery.
Benefits:
Open draperies during a power loss for access
to daylight and the outside
•
Prevent damage to the system if a user attempts
to pull open the drapery, not realizing that the
track is motorized
• Available for pinch pleat or ripplefold
•
Pinch pleat carrier shown:
Engaged: Master carrier hanger bar is connected to master carrier latch plate.
Master carrier
latch plate
Master carrier
hanger bar
Drapery track
Disengaged: When the drapery is manually opened, master carrier hanger bar
releases from master carrier latch plate.
Master carrier
latch plate
Master carrier
hanger bar
To re-engage: Manually re-engage the drapery by pulling it back to the
closed position, or press the “Open” button on the drapery control for
automatic re-engagement.
* Manual override carrier operates on drapery fabric panels weighing up to 70 lbs. (31.7 kg).
|
Lutron 70
|
drapery track pinch pleat drapery panels
Pinch pleat drapery hook assembly
Pinch pleat style is named for the pleated look created by pinched
gatherings of the fabric at the top of the drapery. Pins on the back of the
drapery are simply looped through the carriers on the track when installed.
For the best system performance, a drapery hook setting of 0.5 in. (13 mm)
from the top of the drapery should be used. This allows the system to
operate with minimal noise.
Top of drapery panel
0.50 in.
(13 mm)
Drapery fabric return
(pinch pleat drapery shown)
drapery panel
4.5 in. (114 mm)
minimum for wall
mount bracket
9.5 in. (241 mm)
minimum for dual
mount bracket
wall
|
71 Lutron
|
drapery track ripplefold drapery panels
Ripplefold drapery tape assembly
Ripplefold pleat style is named for the soft, consistent ripples created by the
drapery as it hangs from the track. It offers an elegant, contemporary look —
ideal for both residential and commercial settings.
Drapery is constructed with snap tape (Graber® is required) that allows the
drapery to be snapped directly to auxiliary carriers on the track.
•
Fullness of the drapery is determined by the spacing of the carriers in the track.
The higher the fullness factor, the more full the draperies appear.
Lutron ripplefold tracks are available in three fullness factors: 80%, 100%, 120%.
•
80%
100%
120%
Center draw master carriers
(Center-draw tracks only)
Idler end snap
bracket
4 in
(101 mm)
Drive-end snap bracket
Top of snap tape and
drapery panel
Top of
window
Drapery panel
height +
3/4-1 1/4 in
(19-32 mm)
Floor
1/2-1 in
(13-25 mm) minimum
Bottom of
drapery panel
1/2 in
(13 mm)
3/4 in
(19 mm)
Snap tape
Drapery panel
|
Lutron 72
|
drapery track finished drapery panels
Lutron now offers finished drapery panels for use on our
electronically controlled drapery track.
Specifying a drapery solution just got easier now
that all components are available from Lutron – your
single source.
Drapery panels may be made with fabrics from the Avant
Collection® or with customer’s own material (COM).
Customer’s Own Material
COM may be used to create Roman shades, drapery
panels, and cornices. Contact Shading Quotes for
more information on submitting COM for testing
and approval.
Process for evaluating COM fabrics for
Lutron shading products
1.Build a quote in the SCT for the product you
require, selecting any standard fabric as
a placeholder.
2.In the SCT notes field, please include:
a. Fabric name
b. Color
c. Pattern vertical repeat (inches)
d. Roll width (inches)
e. The related line item number
3.Submit your quote using the Lutron eQuote™ feature.
Lutron will respond to your quote request within
24 hours and will provide you with further instructions,
the dimensions of the fabric that will be required for
evaluation, and shipping details. Please note that
pricing is provided only after COM fabrics are evaluated
and approved.
|
73 Lutron
|
drapery track cornices
Cornices may be used on Kirbé® vertical drapery
systems, traditional drapery systems, as well as Lutron
roller shades. They provide flexibility, as they permit
outside mounts for shading systems with no need for
constructing pockets.
The clean lines of a straight cornice lend themselves to
a contemporary or transitional space. Select a shaped
cornice for traditional décor.
12 in. (305 mm)
typical
Straight cornice
Shape A
Shape B
Shape C
Shape D
Cornices are composed of a .75 in. (19 mm) thick fabric
wrapped board with foam padding. All soft fabrics from
the Avant Collection® are compatible with cornices.
|
Lutron 74
|
drapery track D105 system capacities
Lutron | D105 pinch pleat system capacity
System width
Straight track
24 in. to 32 in. (610 mm to 813 mm)
20 lbs. (9.1 kg)
Curved track,
1 bend
N/A (track too short)
32 in. to 44 in. (813 mm to 1118 mm)
30 lbs. (13.6 kg)
30 lbs. (13.6 kg)
44 in. to 56 in. (1118 mm to 1422 mm)
40 lbs. (18.1 kg)
40 lbs. (18.1 kg)
56 in. to 68 in. (1422 mm to 1727 mm)
55 lbs. (24.9 kg)
50 lbs. (22.7 kg)
68 in. to 84 in. (1727 mm to 2133 mm)
65 lbs. (29.5 kg)
50 lbs. (22.7 kg)
84 in. to 108 in. (2133 mm to 2743 mm)
80 lbs. (36.3 kg)
55 lbs. (24.9 kg)
108 in. to 132 in. (2743 mm to 3353 mm)
105 lbs. (47.6 kg)
55 lbs. (24.9 kg)
132 in. to 156 in. (3353 mm to 3962 mm)
100 lbs. (45.3 kg)
60 lbs. (27.2 kg)
156 in. to 216 in. (3962 mm to 5486 mm)
80 lbs. (36.3 kg)
55 lbs. (24.9 kg)
216 in. to 252 in. (5486 mm to 6401 mm)
70 lbs. (31.7 kg)
50 lbs. (22.7 kg)
252 in. to 288 in. (6401 mm to 7315 mm)
60 lbs. (27.2 kg)
45 lbs. (20.4 kg)
288 in. to 324 in. (7315 mm to 8230 mm)
50 lbs. (22.7 kg)
45 lbs. (20.4 kg)
324 in. to 360 in. (8230 mm to 9144 mm)
40 lbs. (18.1 kg)
35 lbs. (15.9 kg)
Notes for all drive systems:
• A pinch pleat fullness ratio of 3:1 is allowable for sheer draperies only. All other draperies
can have a fullness ratio up to 2.5:1.
• Curved radius to be 20 in. (0.5 m) or greater.
Lutron | D105 ripplefold system capacity
System width
Straight track
24 in. to 32 in. (610 mm to 813 mm)
30 lbs. (13.6 kg)
32 in. to 44 in. (813 mm to 1118 mm)
40 lbs. (18.1 kg)
44 in. to 56 in. (1118 mm to 1422 mm)
55 lbs. (24.9 kg)
56 in. to 68 in. (1422 mm to 1727 mm)
70 lbs. (31.7 kg)
68 in. to 108 in. (1727 mm to 2743 mm)
85 lbs. (38.5 kg)
108 in. to 156 in. (2743 mm to 3962 mm)
65 lbs. (29.5 kg)
156 in. to 180 in. (3962 mm to 4572 mm)
40 lbs. (18.1 kg)
180 in. to 216 in. (4572 mm to 5486 mm)
10 lbs. (4.5 kg) for 80% fullness
10 lbs. (4.5 kg) for 100% fullness
n/a (capacity limit) for 120% fullness
For curved ripplefold systems, please contact the shading solutions service team at 1.888.LUTRON1
|
75 Lutron
|
drapery track D145 system capacities
Lutron | D145 pinch pleat system capacity
System width
Straight track
Curved track,
1 bend
Curved track,
2 bends
24 in. to 32 in. (610 mm to 813 mm)
20 lbs. (9.1 kg)
N/A
N/A
32 in. to 44 in. (813 mm to 1118 mm)
30 lbs. (13.6 kg)
30 lbs. (13.6 kg)
N/A
44 in. to 56 in. (1118 mm to 1422 mm)
40 lbs. (18.1 kg)
40 lbs. (18.1 kg)
N/A
56 in. to 68 in. (1422 mm to 1727 mm)
55 lbs. (24.9 kg)
55 lbs. (24.9 kg)
40 lbs. (18.1 kg)
68 in. to 84 in. (1727 mm to 2134 mm)
65 lbs. (29.5 kg)
65 lbs. (29.5 kg)
45 lbs. (20.4 kg)
84 in. to 108 in. (2134 mm to 2743 mm)
80 lbs. (36.3 kg)
80 lbs. (36.3 kg)
50 lbs. (22.7 kg)
108 in. to 144 in. (2743 mm to 3657 mm) 105 lbs. (47.6 kg)
85 lbs. (38.6 kg)
50 lbs. (22.7 kg)
144 in. to 180 in. (3657 mm to 4572 mm)
145 lbs. (65.8 kg)
90 lbs. (40.8 kg)
55 lbs. (24.9 kg)
180 in. to 216 in. (4572 mm to 5486 mm)
135 lbs. (61.2 kg)
95 lbs. (43 kg)
55 lbs. (24.9 kg)
216 in. to 252 in. (5486 mm to 6400 mm)
120 lbs. (54.4 kg)
95 lbs. (43 kg)
55 lbs. (24.9 kg)
252 in. to 288 in. (6400 mm to 7315 mm)
110 lbs. (49.9 kg)
95 lbs. (43 kg)
50 lbs. (22.7 kg)
288 in. to 324 in. (7315 mm to 8230 mm) 100 lbs. (45.4 kg)
90 lbs. (40.8 kg)
50 lbs. (22.7 kg)
324 in. to 360 in. (8230 mm to 9144 mm)
85 lbs. (38.6 kg)
45 lbs. (20.4 kg)
90 lbs. (40.8 kg)
Notes for all drive systems:
• A pinch pleat fullness ratio of 3:1 is allowable for sheer draperies only. All other draperies can have
a fullness ratio up to 2.5:1.
• Curved radius to be 20 in. (0.5 m) or greater.
Lutron | D145 ripplefold system capacity
System width
Straight track
24 in. to 32 in. (610 mm to 813 mm)
30 lbs. (13.6 kg)
32 in. to 44 in. (813 mm to 1118 mm)
40 lbs. (18.1 kg)
44 in. to 56 in. (1118 mm to 1422 mm)
55 lbs. (24.9 kg)
56 in. to 68 in. (1422 mm to 1727 mm)
70 lbs. (31.7 kg)
68 in. to 84 in. (1727 mm to 2133 mm)
85 lbs. (38.5 kg)
84 in. to 108 in. (2133 mm to 2743 mm)
105 lbs. (47.6 kg)
108 in. to 132 in. (2743 mm to 3353 mm)
140 lbs. (63.5 kg)
132 in. to 168 in. (3353 mm to 4267 mm)
125 lbs. (56.9 kg)
168 in. to 216 in. (4267 mm to 5486 mm)
90 lbs. (40.8 kg)
216 in. to 252 in. (5486 mm to 6400 mm)
50 lbs. (22.7 kg)
For curved ripplefold systems, please contact the shading solutions service team at 1.888.LUTRON1
|
Lutron 76
|
drapery track D175 system capacities
Lutron | D175 pinch pleat system capacity
20 lbs. (9.1 kg)
Curved track,
1 bend
N/A
Curved track,
2 bends
N/A
32 in. to 44 in. (813 mm to 1118 mm)
30 lbs. (13.6 kg)
30 lbs. (13.6 kg)
N/A
44 in. to 56 in. (1118 mm to 1422 mm)
40 lbs. (18.1 kg)
40 lbs. (18.1 kg)
N/A
56 in. to 68 in. (1422 mm to 1727 mm)
55 lbs. (24.9 kg)
55 lbs. (24.9 kg)
55 lbs. (24.9 kg)
68 in. to 84 in. (1727 mm to 2134 mm)
65 lbs. (29.5 kg)
65 lbs. (29.5 kg)
65 lbs. (29.5 kg)
84 in. to 108 in. (2134 mm to 2743 mm)
80 lbs. (36.3 kg)
80 lbs. (36.3 kg)
70 lbs. (31.8 kg
108 in. to 132 in. (2743 mm to 3353 mm)
105 lbs. (47.6 kg)
105 lbs. (47.6 kg)
80 lbs. (36.3 kg)
132 in. to 168 in. (3353 mm to 4267 mm)
130 lbs. (59.0 kg)
120 lbs. (54.4 kg)
85 lbs. (38.6 kg)
168 in. to 216 in. (4267 mm to 5486 mm)
165 lbs. (74.8 kg)
125 lbs. (56.7 kg)
90 lbs. (40.8 kg)
216 in. to 252 in. (5486 mm to 6401 mm)
175 lbs. (79.4 kg)
130 lbs. (59.0 kg)
95 lbs. (43.1 kg)
252 in. to 288 in. (6401 mm to 7315 mm)
165 lbs. (74.8 kg)
135 lbs. (61.2 kg)
95 lbs. (43.1 kg)
288 in. to 324 in. (7315 mm to 8230 mm)
155 lbs. (70.3 kg)
135 lbs. (61.2 kg)
90 lbs. (40.8 kg)
324 in. to 360 in. (8230 mm to 9144 mm)
145 lbs. (65.8 kg)
135 lbs. (61.2 kg)
90 lbs. (40.8 kg)
System width
Straight track
24 in. to 32 in. (610 mm to 813 mm)
Notes:
• A pinch pleat fullness ratio of 3:1 is allowable for sheer draperies only. All other
draperies can have a fullness ratio up to 2.5:1.
• Curved radius to be 20 in. (0.5 m) or greater.
Lutron | D175 ripplefold system capacity
System width
Straight track
24 in. to 32 in. (610 mm to 813 mm)
32 in. to 44 in. (813 mm to 1118 mm)
44 in. to 56 in. (1118 mm to 1422 mm)
56 in. to 68 in. (1422 mm to 1727 mm)
68 in. to 84 in. (1727 mm to 2134 mm)
84 in. to 108 in. (2134 mm to 2743 mm)
108 in. to 132 in. (2743 mm to 3353 mm)
132 in. to 168 in. (3353 to 4267 mm)
168 in. to 216 in. (4267 mm to 5486 mm)
216 in. to 252 in. (5486 mm to 6401 mm)
252 in. to 288 in. (6401 mm to 7315 mm)
288 in. to 324 in. (7315 mm to 8230 mm)
30 lbs. (13.6 kg)
40 lbs. (18.1 kg)
55 lbs. (24.9 kg)
70 lbs. (31.8 kg)
85 lbs. (38.6 kg)
105 lbs. (47.6 kg)
140 lbs. (63.5 kg)
165 lbs. (74.8 kg)
155 lbs. (70.3 kg)
130 lbs. (59.0 kg)
100 lbs. (45.4 kg)
55 lbs. (24.9 kg)
50 lbs. (22.7 kg) for 80%
50 lbs. (22.7 kg) for 100%
N/A (capacity limit) for 120%
324 in. to 360 in. (8230 mm to 9144 mm)
|
77 Lutron
For curved ripplefold systems, please contact the shading
solutions service team at 1.888.LUTRON1.
|
Sivoia QS/Sivoia QS Wireless Kirbé vertical drapery system
®
®
|
Lutron 78
|
Kirbé vertical drapery system system overview
®
An industry first – this entirely new type of
window treatment smoothly pulls the drapery
up and out of the way at the touch of a button.
Kirbé is currently offered with sheer fabrics from
the Avant Collection® that range from traditional
neutrals to bold shimmering patterns.
Optional roller 64™ or roller 100™ integrate
seamlessly with the standard Kirbé brackets to
allow for complete privacy and additional light
blocking capability.
Finish off the look of your Kirbé with a Lutron
cornice (see page 74).
Kirbé is also available with a manual clutch
uptake system.
|
79 Lutron
Kirbé® vertical drapery system example installation (roller 64™ shown)
A
Dimensions
8 in. (203 mm) minimum cornice depth
B
5.58 in. (142 mm)
12 in. (305 mm) recommended
cornice height
F
C
0.75 in. (19 mm)
0.27 in. (7 mm)
7.56 in. (192 mm) wood blocking
Max rollup = 3 in. (76 mm)
Hembar
E
G
H
36 in. (914 mm) minimum height
1.5 in. (38 mm) minimum light gap
24 in. (610 mm) minimum width
Cornices must be ordered 2 in.
(51 mm) larger than Kirbé width
glass (typical)
D
L
K
C
I
J
|
Lutron 80
|
Kirbé vertical drapery system system components
®
Kirbé eliminates stackback—the mass of fabric
left when a traditional drapery is opened—and
features a number of innovations that make rolling
pleated fabric in a window treatment possible.
Header mechanism
Reliably and delicately smooths and pleats fabric
as it is taken into and let out of the mechanism.
Perma-pleat™ bottom bar
Weights fabric and maintains a smooth and even
pleat to keep drape uniform.
Header mechanism
With optional
roller shade
Header mechanism
Perma-pleat bottom bar
Header mechanism with Kirbé fabric
|
81 Lutron
|
Sivoia QS/Sivoia QS Wireless Roman shades
®
|
Lutron 82
|
Roman shades system overview
Lutron Roman shades with CERUS® safety technology
A revolutionary design in Roman shades, the Cord Eliminating Roman Uptake System
(CERUS) eliminates lifting cords associated with normal Roman shade construction and
creates an industry first for safer shades with silent and smoother operation. The drives
used in Lutron Roman shades have specific hardware to ensure smooth motion on a
Roman shade, which has different loading than a roller shade (roller 64™ and roller 100™
drives available).
Lutron Roman shades are offered in four styles:
Flat
Hobbled
Knife
Casual
About CERUS safety technology.
Eliminating cords from the traditional construction of Roman shades has
four major advantages.
Improved reliability
With the elimination of cords, the Roman shade will never become
tangled, ensuring the shade will work perfectly every time.
Superior performance
CERUS also allows for a smoother, more even travel of the shade,
since a cord is not stacking and slipping as it rolls. Additionally, Lutron
electronic drive units (EDUs) for Roman shades have upgraded software
for enhanced precision movement.
Quiet operation
Lifting cords slip and stack as the shade rolls, creating a noticeable noise
that can be amplified if the cords become entangled. Replacing these
cords with CERUS bands eliminates those issues, allowing your nearsilent EDU (38 dBA at 3 ft.) to operate quietly and not disrupt occupants
in a space.
Advanced safety
CERUS safety technology allows for a safer Roman shade system by
utilizing uptake bands in place of exposed inner cords. Inner cords may
pose a strangulation hazard to small children.
|
83 Lutron
CERUS uptake band
|
Lutron 84
|
Roman shades dimensions
Roman shade dimensions
In order to expand Roman shades sizes, we developed a 2-on-1 and 3-on-1 headrail system. This
allows for multiple fabric/woven woods panels to be attached to one headrail with the ability to custom
place each panel, and takes into consideration window mullions and hardware. There is a minimum light
gap requirement of at least 0.5 in. between woven woods panels; there is no requirement for soft fabrics.
Maximum Dimensions*
Soft Fabrics
102 in. w x 120 in. h
(mm x mm)
144 in. w x 120 in. h
(mm x mm)
1-on-1 system
2-on-1 system
3-on-1 system
Woven Woods
Roll width x 120 in. h
(Roll width x mm)
144 in. w x 120 in. h
(mm x mm)
Headrail and Drive Configurations
Headrail depth
2.5 in. (64 mm)
3 in. (76 mm)
4.5 in. (114 mm)
5 in. (127 mm)
Front control
roller 64™
roller 100™
roller 150™
Manual clutch V8
Manual clutch V16
Manual clutch V24
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Back control
roller 64
roller 100
roller 150
Manual clutch V8
Manual clutch V16
Manual clutch V24
•
•
•
•
•
•
Fabric selection
Roman shades can be made using soft fabrics or woven woods from the Avant Collection®,
or with a customer’s own material (see page 143 for details on COM approval process).
Visit the Fabrics page (www.lutron.com/Fabrics) for the most up to date information on our
fabric selection.
|
85 Lutron
* Minimum dimensions for all panels and systems = 25 in. w x 24 in. h (mm x mm).
|
Sivoia QS/Sivoia QS Wireless Venetian blinds
®
|
Lutron 86
|
Venetian blinds system overview
Venetian blinds are an attractive and effective
way to ensure privacy, while still allowing daylight
to filter into a space.
|
87 Lutron
Lutron exclusive independent lift and tilt
technology maintains uniform tilt and lift positions
between blinds and combines smooth, quiet
motion with separate control of tilt and lift for the
ultimate in style and convenience.
Note: Venetian blinds are available in Sivoia® QS and
Sivoia QS Wireless systems only.
Lutron innovation
Independent control of tilt and lift
• Adjust position of blinds without affecting
the angle of slats
Precision control for groups of blinds
• Lutron technology maintains uniform tilt and
lift positions across multiple blinds
• Blinds maintain Intelligent Hembar
Alignment™, which has become the
hallmark of Lutron shades
Recall presets
Blinds adjust to a pre-determined height and
tilt angle when a preset is recalled
• Multiple presets can be defined for the same
blind or group of blinds
•
Fine-tune light and privacy levels
• Venetian blind controls offer tilt adjustment
buttons for precise positioning
• Range of tilt can be adjusted from full tilt in
either direction down to a fixed tilt angle
Style
Lutron Venetian blinds can be customized to your room’s design. Or choose exotic materials such
as leather and bamboo from the Impact line of the Euro Collection with Coulisse.
NEW Avant Venetian collection
Coming Fall 2014
Decorative tapes (optional)
Cover operational cords, adding a
colorful accent to Venetian blinds.
|
Lutron 88
|
Venetian blinds dimensions
Venetian blinds example dimensions
Dimensions
Wood blocking
B
A
3.55 in. (90 mm)
C
2.52 in. (64 mm)
3.75 in. (95 mm)
Finished ceiling
Wood slats shown
D
E
2 in. (50 mm)
Glazing (typical)
24 in. (610 mm)
minimum headrail width
12 in. (305 mm)
minimum blind height
F
1.63 in. (41 mm)
optional tape
G
H
I
D
J
|
89 Lutron
F
K
|
Sivoia QS/Sivoia QS Wireless Horizontal sheer blinds
®
|
Lutron 90
|
Horizontal Sheer Blinds system overview
Beautiful fabric meets industry-leading technology
in these window treatments, where the soft
elegance of a sheer is paired with the precise
control of a blind.
Sheer layers combined with fabric vanes provide
the perfect blend of filtered sunlight inside a space
and view to the outside, while maximizing the
control of both. Sheer layers also offer privacy,
even when vanes are open. Fabric-wrapped fascia
gives the option of matching the top treatment to
the blind, or a custom cornice can be installed to
finish the look.
2 inch vane (roller 64TM)
3 inch vane (roller 100TM)
Roller 64 can operate up to 64 ft2 of fabric.
Roller 100 can operate up to 100 ft2 of fabric.
Size
Size
Tube size: 1.625 in. diameter
•
•
Typical maximum size of fabric*: 64 ft2
•
Mounting options
Mounting options
•
wall or ceiling mount uses bracket that mounts to
metal top-back cover
•
Tube size: 2.56 in. diameter
Typical maximum size of fabric*: 100 ft2
Wall or ceiling mount uses bracket that mounts
to metal top-back cover
•
Minimum bracket-to-bracket width: 18.5 in.
•
•
Maximum bracket-to-bracket width*: 96 in.
•
Performance
Performance
•
Operates at less than 38 dBA at 3 ft.
•
2 inch vane
|
91 Lutron
Minimum bracket-to-bracket width: 24 in.
Maximum bracket-to-bracket width*: 114 in.
Operates at less than 38 dBA at 3 ft.
•
3 inch vane
* Larger shades may be available based on fabric selection. Contact Customer Service
or use the SCT for actual shade dimensions based on fabric type.
|
Horizontal Sheer Blinds dimensions
System component dimensions:
Top-back cover:
4.00 in
(102 mm)
2.89 in
(73 mm)
Blind width
(minus standard deduction determined in manufacturing)
2 inch blind brackets:
4.35 in
(110 mm)
2.97 in
(75 mm)
2.25 in
(57 mm)
2 inch optional fabric wrapped fascia with end caps:
5.00 in
(127 mm)
Blind width
3.80 in
(97 mm)
|
Lutron 92
|
Horizontal Sheer Blinds dimensions
3 inch blind brackets:
4.12 in
(105 mm)
3.62 in
(92 mm)
2.13 in
(54 mm)
3 inch optional fabric wrapped fascia with end caps:
5.00 in
(127 mm)
BLIND WIDTH
|
93 Lutron
4.45 in
(113 mm)
Mounting options
Pocket installation
Depending on the window dimensions, the shade
can be mounted inside the window frame or
outside the window frame.
Minimum pocket size: 2 inch blind
(Using standard roller 64TM mounting brackets.)
3.52 in
(89 mm)
3.53 in
(90 mm)
Inside mount
To use inside mount, the window depth must be at
least: 2 1/4 in (57 mm) for both 2 in and 3 in vanes
For fully recessed installation, the window depth
must be at least: 3 3/4 in (95 mm) for 2 in vanes,
4 1/2 in (114 mm) for 3 in vanes
Ceiling
Glass
1.70 in
(43 mm)
Fully lowered
Minimum pocket size: 3 inch blind
(Using standard roller 100TM pocket-mount brackets.)
4.76 in
(121 mm)
Outside mount on trim
5.00 in
(127 mm)
Ceiling
Glass
Outside mount above trim
2.60 in
(66 mm)
Fully lowered
|
Lutron 94
Horizontal sheer blinds are compatible with standard Pico® and seeTouch® controls. Special controls have
been specifically designed for this window treatment, enabling the View button to toggle between the View
and Closed positions. Note: toggle function on seeTouch control for horizontal sheer will only work when
integrated with a HomeWorks® QS or RadioRA®2 system. For a shade-only solution, the View button will
only go to the View position and will not return to Closed when pressed again.
Horizontal sheer blind
seeTouch keypad
|
95 Lutron
Horizontal sheer blind
Pico wireless control
Pleated and Fashion
Sivoia QS/Sivoia QS Wireless Honeycomb Shades
®
|
|
Lutron 96
|
Pleated and Fashion Honeycomb Shades system overview
XL Pleat shades, Fashion Pleated shades, and
Fashion Honeycomb shades are operated by ultraquiet, precision control drives. The shade drive is
housed in the headrail and provides smooth, quiet
movement. Shade position can be stored as a
preset, offering privacy and light control with the
touch of a button.
Aesthetics
• Aluminum headrail provides clean minimalist look.
Available in a wide variety of fabrics, colors, prints,
and patterns
•
Design
• Shades go to a pre-determined height when a
preset is recalled
Pleated shade
Multiple presets can be defined for the same shade
or group of shades
•
Compatible with Sivoia® QS and Sivoia QS
Wireless systems
•
Shade components designed for ultra-quiet
operation (will not exceed 44 dBa measured 3 ft
(1 m) from drive unit)
•
Simple installation for both inside mount and
outside mount applications
•
Provides maximum window coverage –
symmetrical light gaps on both sides for a
clearance of 1⁄8 in (3 mm) per side between
blind and window jamb
•
Fabric options
Provide added dimension to a room with crisp
Z-shaped pleats and textured weaves of pleated
shades from the Gallery Collection or the Impact
line of the Lutron Coulisse Collection.
Offer superior insulation with large, elegant cells of
Fashion Honeycomb shades from the
Gallery Collection.
See pg. 149-150 for selection guide and fabric
stack guide
•
|
97 Lutron
Fashion Honeycomb shade
|
Lutron 98
|
Pleated and Fashion Honeycomb Shades dimensions
Mounting options
Brackets can be inside mounted, or outside mounted on the trim or above the trim.
Inside mount
Outside mount on trim
Outside mount above trim
Bracket dimensions
0.600 in
(15 mm)
0.730 in
(18.5 mm)
5.530 in
(64 mm)
uncompressed
0.373 in
(9.5 mm)
9.880 in
(25 mm)
1.540 in
(64 mm)
0.600 in
(15 mm)
Headrail dimensions
2.330 in
(59 mm)
2.930 in
(74.4 mm)
|
99 Lutron
1.240 in
(31.5 mm)
|
Sivoia QS/Sivoia QS Wireless controls
®
|
Lutron 100
|
controls seeTouch keypads
®
Lutron seeTouch® keypads work with Sivoia® QS systems to control Lutron
shading solutions and lights. Keypads are available with standard or
custom engraving in a wide selection of colors and finishes.
seeTouch keypad operation:
Open button allows shade or drapery to move
to its open limit
•
Presets allow user to select preferred
settings for shading solutions
•
Close button allows shade or drapery to return
to its closed limit
•
Raise/lower buttons allow for fine-tuning shade
or drapery position
•
Not shown: Group buttons allow individually
selected groups of shades to move in concert
•
Lutron keypads are programmable and can be
customized for every installation.
seeTouch (QS shown)
|
101 Lutron
Lutron controls are available in three distinct wallplate styles,
as well as different button configurations:
Designer (insert)
2.94 in. w x 4.69 in. h
(75 mm x 119 mm)
Architectural (insert)
2.75 in. w x 4.625 in. h
(70 mm x 118 mm)
Insert style allows for a combination of lighting
and shading controls. Interchangeable
wallplates allow for flexible installations with
multiple ganged controls. Any Lutron 120 V
dimmer and low voltage keypad may be
mounted in a common backbox.
Architectural (non-insert)
Non-insert, architectural style offers an elegant
solution best suited for a stand-alone shade control.
Lutron controls are also available with custom engraving options (see page 103).
seeTouch® keypads are available in over 40 colors and finishes including metals.
See the “Colors of Lutron” brochure (P/N 367- 949) for more information.
|
Lutron 102
|
controls engraving options
All Lutron keypads can be
custom engraved
Engraving for tabletop keypads is now offered
within the SCT for quick and easy customization.
New procedure for engraving:*
Select a keypad in the SCT
• Within the customization, select
“Custom Engraving” option
• Select position of text and text case
• Click on the image of the keypad shown
and enter text on buttons as desired
• Add the customized keypad to your order
•
RadioRA® 2 tabletop keypad
seeTouch® designer keypad
|
103 Lutron
*Custom engraving within SCT available with limited selection of products.
|
controls technology overview
Sivoia® QS
RS232/Ethernet interface
l
Quantum® integration
l
RadioRA® 2 integration
Sivoia QS Wireless
l
l
GRAFIK Eye® QS integration
l
l
HomeWorks® QS integration
l
l
Contact closure interfaces
l
l
Low-voltage power
l
l
Individual power supplies
l
l
Multiple output power supplies
l
l
Lutron quiet electronic drive
l
l
Intelligent Hembar Alignment™
l
l
l = Available
Standard features of all control technologies
|
Lutron 104
|
controls Sivoia QS
®
seeTouch® QS keypads
seeTouch QS keypads control shading solutions and
lights. All keypads are available with standard or
custom engraving in a variety of colors and finishes.
Architectural style only (insert and non-insert).
Color and finish ordering sample:
QSWS2-3BRT-(I/N)-WH-E01
Include I for insert style OR
Include N for non-insert style
Include color code (WH) to specify color/finish.
QSWS2-2BRL-NWH-E01
Two button keypad
with raise/lower
QSWS2-3BRL-NWH-E01
Three button keypad
with raise/lower
QSWS2-5BRL-NWH-E01
Five button keypad
with raise/lower
QSWS2-1RLD-NWH-E01
Three-group,
two button keypad
with raise/lower, E01
QSWS2-1RLD-NWH-E02
Three-group,
two button keypad
with raise/lower, E02
QSWS2-2RLD-NWH-E02
Two button keypad
with raise/lower for
dual shades, E01
QSWS2-3BD-NWH-E01
Three button keypad
for dual shades
QSWS2-3BRLIR-NWH-E01
Three button keypad
with raise/lower and
infrared (IR) reception
Sivoia® QS components
Venetian Keypads
QSWKI-2TD-WH-E01
Dual two button
keypad with tilt adjust
|
105 Lutron
QSWS2-3BRLIR-I-XX-E01
Three button keypad with tilt
adjust and IR reception
QSE-IR-WH
Remote IR eye for Sivoia QS lights
and shades
• Receives remote IR signal from handheld
IR remote controls
• Allows simple integration to A/V
equipment with QS devices via QS Link
• Available in White (WH)
For a complete guide on keypad options with model numbers, please refer to the
seeTouch QS wallstation specification submittal at www.lutron.com/SivoiaQS.
GRAFIK Eye® QS keypads
GRAFIK Eye QS wall controls control shading solutions and lights. All keypads are available with
standard or custom engraving in a variety of colors and finishes.
A. Scene control
• 4 scenes and off
• Backlit, engravable buttons
• Easy to change in the field
B. Shade control
• Open, preset, close
•Raise/lower
•
Available with none, 1, 2, or 3
shade group keypad controls
E. Information display
• Energy savings
• Lighting levels
• Timeclock information
F. IR receiver
•
Allows wireless connectivity
to handheld IR remote
G. NEW RF tranceiver
•
Allows wireless connectivity
to other RF devices
C. Light control
•
3, 4, or 6 zones
(standard 120V model)
•
6, 8, or 16 zones
(EcoSystem® model)
D. Astronomic timeclock
•
Scheduling to meet
energy codes
• Includes “after-hours” mode
NEW Wireless RF
connections to:
•Sivoia® QS Wireless shades
• Radio Powr Savr
™ occupancy/
vacancy sensor
•Pico® wireless controls
Wired connections to:
• Sivoia QS shades
• Occupancy/vacancy sensors
•seeTouch® QS wall keypads
• RS-232/Ethernet interfaces
• Power modules
EcoSystem® low voltage
connections to:
• EcoSystem, Hi-lume® 3D
ballasts, and/or Hi-lume LED
drivers (64 maximum)
• Daylight sensors
• Occupancy/vacancy sensors
For more information on GRAFIK Eye QS, visit www.lutron.com/GRAFIKEyeQS.
|
Lutron 106
|
controls Sivoia QS Wireless
®
seeTouch® QS wireless keypads
seeTouch QS wireless keypads control shading
solutions and lights. All keypads are available with
standard or custom engraving in a variety of colors
and finishes. Designer insert style only.
Color and finish ordering sample:
QSW4-3BRLT-WH-E01
Include color code (WH) to specify color/finish.
Sivoia® QS Wireless keypads (P/N for 434 mHz only)
QSW4-2BR-WH-E01
Two button keypad
with raise/lower
QSW4-3RI-WH-E01
Three button keypad
with raise/lower and
infrared (IR) reception
QSW4-5BR-WH-E01
Five button keypad
with raise/lower
Sivoia® QS Wireless tabletop keypads*
QSW4-T5S-WH-E01
Five button
tabletop keypad
with raise/lower
QSW4-T10S-WH-E01
Ten button
tabletop keypad
with raise/lower
QSW4-T15S-WH-E01
Fifteen button
tabletop keypad
with raise/lower
Sivoia QS Wireless components
RF receiver
Remote RF receiver for Sivoia QS Wireless shades
• Receives remote RF signal from handheld remote controls
• Available in White (WH)
• 7.18 in. x 0.84 in. (182 mm x 21 mm)
|
107 Lutron
* Requires use of main repeater
Sivoia® QS Wireless and RadioRA® 2 compatible keypads
QSW4-3BR-WH-E01
Three button keypad
with raise/lower
QSW4-5RI-WH-E01
Five button keypad
with raise/lower
and IR reception
QSWK4-2RD-WH-E01
Two button keypad
for dual shades
with raise/lower
QSWK4-2RD-WH-EGN
Two button keypad
for lights and shades
with raise/lower
QSWK4-3BD-WH-E01
Three button keypad
for dual shades
QSWK4-3BD-WH-EGN
Three button keypad
for lights and shades
QSWK4-6BR-WH-NST
Six button keypad
with raise/lower
QSWK4-7B-WH-NST
Seven button keypad
Sivoia QS Wireless and RadioRA 2 compatible tabletop keypads*
QSW4-T5R-WH-NST
Five button
tabletop keypad
with raise/lower
QSW4-T10R-WH-NST
Ten button
tabletop keypad
with raise/lower
* Requires use of main repeater.
QSW4-T15R-WH-NST
Fifteen button
tabletop keypad
with raise/lower
|
Lutron 108
|
controls RF remote controls
RF remote controls
The Pico® wireless control is available in a
variety of colors to coordinate with any décor.
Note: The “Favorite” button is silver on the
White/Gray Pico only. All other offerings have
uniform button colors.
Pico controls are now available with QS sensor
module (QSM2-4W-C)* which provides control
of Sivoia® QS wired shades through Pico
wireless controls.
Pico model number:
PJ2- XXXX -G XX - XXX
PJ2-3BRL-GWH-S02
XXXX Button configuration code
XX
Color code
XXX
Button marking code
XXXX
Button configuration
Code
2-button........................................2B
2-button with raise/lower...............2BRL
3-button........................................3B
3-button with raise/lower...............3BRL
XX
Code
Gloss color
White.............................................WH
Black.............................................BL
Ivory..............................................IV
Light Almond.................................LA
White / Gray...................................WG
(Top and Raise buttons are White; Preset,
Lower, and Bottom buttons are Gray)
XXX
Button marking
Code
Light..............................................L01
Shade (icons) ................................S01
Shade (text) ..................................S02
Blackout .......................................S03
Sheer ...........................................S04
Blind .............................................S05
Skylight ........................................S06
Drapery ........................................S07
Screen ..........................................S08
Horizontal sheer blind ...................S09
Custom bases for Pico (L-PED1-XX)
Customize your Pico tabletop control with
White or Black gloss color bases.
(PEDX=number of pedestals; up to three)
For more information, see P/N 369-453.
|
109 Lutron
*P
ico controls are also compatible with QS wired shades using QS Link.
This allows for seamless reconfiguration of controls without rewiring.
2.6 in.
(66 mm)
0.31 in.
(8 mm)
Dimensions of Pico® control and tabletop pedestal
Easy reconfiguration for use as a handheld control, wall-mount control,
or tabletop control* using the optional pedestal or wall-mount kit.
1.30 in.
(33 mm)
1.46 in.
(37 mm)
2.6 in.
(66 mm)
0.31 in.
(8 mm)
2.95 in.
(75 mm)
1.77 in. (45 mm)
Wall-mount configuration:
Claro® wallplate, Pico control, and wallplate adapter for Pico
1.46 in. in wallplate; up to four)
Claro wallplate—CW-1-XX (CW-1=number of openings
(37 mm)
Wallplate adapter, surface-mount kit, and wallplate sold separately.
P/N PICO-FP-ADAPT
P/N PICO-SM-KIT
P/N CW-1/2/3/4-XX
2.95 in.
(75 mm)
1
2
3
4
1.77 in. (45 mm)
2.94 in. w x 4.69 in. h
(75 mm x 119 mm)
* Dual pedestal also available.
|
Lutron 110
|
controls RadioRA 2 integration
®
RadioRA® 2 integration
RadioRA 2 is a wireless light control system that provides convenient
and intuitive control of lights, shades, audio-visual devices, and
temperature in a in a single room or throughout the whole home.
It installs easily, programs quickly, and operates reliably with
Clear Connect® RF technology. All Sivoia® QS Wireless shades and
devices are compatible with RadioRA 2.
Start with any area and simply add components at any time to
grow the system from a single room to a whole home — scales from
2 to 100 devices
• Works directly with Sivoia QS Wireless shades and draperies,
GRAFIK Eye® QS Wireless and Radio Power Savr™
occupancy/vacancy sensors
• Control from remotes, home automation systems, mobile devices,
and more — all on one repeater
• Provides open integration with any device capable of sending
and/or receiving RS232 or IP commands to control lights and shades
• Intuitive and simple PC-based or button-press programming
•
Components
Main repeater (RR-MAIN-REP-WH)
Provides open integration with other systems
and devices with PC programming
• Included astronomic timeclock allows system
control based on time of day as well as
sunrise/sunset
•
|
111 Lutron
Auxiliary repeater (RR-AUX-REP-WH)
• Extends system RF range in larger applications,
outdoor spaces, and between buildings
• Can be used wirelessly within the home, or wired
to another repeater to span long distances
|
Lutron 112
|
controls IR remote controls
Lutron infrared (IR) transmitters control single or dual groups of window treatments, as well as light
and shade groups in rooms with integrated systems. The transmitters operate with Sivoia® QS and
Sivoia QS Wireless systems, and feature a clean and simple aesthetic. Labels shown are standard.
Classic style
SVIT-WH (as shown)
• Open, Close
•Dimensions:
Width: 1.5 in. (38 mm)
Length: 4.6 in. (117 mm)
Depth: 0.65 in. (17 mm)
Single shade group
Open, Close,
Favorite preset button
SVIT-SH-WH (as shown)
•Shade
SVIT-DR-WH
•Drapery
2 shade groups
Group 1: Open, Close,
Favorite preset button
• Group 2: Open, Close,
Favorite preset button
•
SVIT-SC-BL-WH (as shown)
•Screen
•Blackout
SVIT-SR-BL-WH
•Sheer
•Blackout
SVIT-SH-DR-WH
•Shade
•Drapery
SVIT-SH-SH-WH
• Shade 1
• Shade 2
|
113 Lutron
Shade and lighting control
• Shades: Open, Close,
Favorite preset button
• Light: On, Off,
Favorite preset button
SVIT-GRX-DR-WH
• Light (GRAFIK Eye® lighting)
• Drapery (Sivoia drapery)
SVIT-GRX-SH-WH (as shown)
• Light (GRAFIK Eye® lighting)
• Shades (Sivoia shades)
SVIT-MIR-SH-WH
• Light (Maestro® IR lighting)
• Shade (Sivoia shades)
SVIT-MIR-DR-WH
• Light (Maestro IR lighting)
• Drapery (Sivoia drapery)
Convenience
Choose from a variety of hand-held remotes. Lutron electronic drive units offer
built-in IR reception.
SVQ-3PIT-WH
Three preset hand-held
IR remote
• Offers open/close, three
programmable presets and
fine-tune raise/lower control
• Can control one shade or a
group of shades together
•Dimensions:
Width: 1.5 in. (38 mm)
Length: 5.69 in. (145 mm)
Depth: 0.88 in. (22 mm)
SVQ-4GD-OCIT-WH
Multi-function hand-held IR
remote — Sivoia QS*
• Designed specifically to control
both individual and groups
of shades
• Ideal for dual-mounted shades
(to control two shades on the
same window)
*Works with Sivoia QS with the
following conditions:
• All shades are wired together on
the same communications link
• Any one shade can be
programmed to be a part of up
to three shade groups max on the
SVQ-4GD-OCIT-WH remote
(per QS IR eye)
• The SVQ-4GD-OCIT-WH remote
only gives Open, Close, Raise,
Lower for each group; there are
no presets
|
Lutron 114
|
controls dimmers
Complement your design using the colors of Lutron for a coordinated look
throughout your space. Lutron dimmers and accessories come in a variety
of styles and finishes and add ambiance, convenience, and energy savings.
See the “Colors of Lutron” brochure (P/N 367-949) for more information.
Lutron dimmers
Available in Designer Gloss or Satin Colors® finishes:
Maestro®
Diva®
Skylark®
Ariadni®
Lyneo™ Lx
Architectural Matte and Architectural Metal finishes:
Vierti®
|
115 Lutron
Nova T*®
Nova®
Vareo®
Multiple devices with line and low-voltage can be mounted under
a common wallplate using a standard barrier backbox (see Lutron
Application Note #213 at www.lutron.com/applicationnotes).
Wallplate configurations
2-gang Satin Colors® wallplate with Maestro® and shade keypad
Wallplate configurations
2-gang gloss wallplate with Abella® and shade keypad
|
Lutron 116
|
controls accessories
Lutron accessories
Available in Designer Gloss, Satin Colors®, Architectural Matte, or Architectural Metal finishes:
GFCI
Dimmable
receptacle
Receptacle
6-port jack
Phone jack
Cable jack
1–6 gang designer
opening wallplates
1–6 gang traditional
opening wallplates
|
117 Lutron
|
Sivoia QS/Sivoia QS Wireless wiring
®
|
Lutron 118
|
wiring overview
System wiring overview: QS smart panel power supply
Sivoia® QS
roller shade
Sivoia QS
drapery track
Sivoia QS
tensioned shade
4-conductor wire length,
gauge and number of
shades or draperies
varies. Refer to QS
Power Supply Panel
Wiring Guide below.
QSPS-P1-10-60
10 output smart panel power supply
QS Link wiring
The following link rules must be observed for proper operation:
1. Use only cable with at least one twisted/shielded pair for communications (MUX and MUX).
2. Total length of wire in entire system must be less than 2,000 ft. (609 m).
Sivoia® QS Power Supply Panel Wiring Guidelines
Maximum devices per one output
Maximum distance per one output based on wire gauge
Shades + Controls
16 AWG (1.5 mm2)
12 AWG (4 mm2)
18 AWG (1 mm2)
QSH-CBL-L-500
QSH-CBL-M-500
GRX-CBL-346S-500
QSH-CBLP-L-500 QSH-CBLP-M-500
None
Up to 50 power
draw units
1250 ft. (375 m)
500 ft. (150 m)
250 ft. (75 m)
None
Up to 25 power
draw units
2000 ft. (600 m)
1000 ft. (300 m)
600 ft. (175 m)
500 ft. (150 m)
200 ft. (60 m)
125 ft. (35 m)
200 ft. (60 m)
75 ft. (20 m)
50 ft. (15 m)
100 ft. (30 m)
50 ft. (15 m)
1 Sivoia QS shade/
drapery* drive unit
2 Sivoia QS roller 64™, ≤
30 sq. ft. (2.75 sq. m) each
3 Sivoia QS roller 64, ≤
20 sq. ft. (1.80 sq. m) each
Up to 1 power
draw unit
2 Sivoia QS roller 100™, ≤
50 sq. ft. (4.6 sq. m) each
Sivoia QS Individual Power Supply Wiring Guidelines
1 Sivoia QS
shade/drapery*
Up to 1 power
draw unit
250 ft. (75 m)
None
Up to 8 power
draw units**
2000 ft. (600 m)
|
119 Lutron
1500 ft. (450 m)
* roller 20™, roller 64, roller 100, roller 150™, roller 225™, roller 300™, D105, D145, D175, tensioned shades,
Kirbé®, Roman shades, Venetian blinds, horizontal sheer blinds, Pleated and Fashion Honeycomb shades
** 2 seeTouch QS keypads may be exchanged for 1 control interface (QSE-CI-NWK-E)
One shade/drapery per output with individual power supply
Sivoia® QS shade/drapery
Com
MUX
+24 VDC
MUX
Com
MUX
MUX
Refer to wire length chart
on page 119 for wire gauge
and distance requirements
QSPS-P1-1-50
One shade/drapery per power panel output
Sivoia QS shade/drapery
Refer to wire length chart
on page 119 for wire gauge
and distance requirements
Sivoia QS shade/drapery
seeTouch® QS
keypad
120 V~
60 Hz
QSPS-P1-10-60
|
Lutron 120
|
wiring power panel wiring diagram
Sivoia® QS with GRAFIK Eye® QS system wiring
Smart panel power supply, single shade per output
Sivoia QS
shade/drapery
120 V~
60 Hz
120 V~
60 Hz
QSPS-P1-10-60
10 output smart
panel power supply
100 devices
per link max.
100 zones
Refer to wire length chart
on page 119 for wire gauge
and distance requirements
QSPS-P1-10-60
10 output smart
panel power supply
To other
QS controls
seeTouch® QS
keypads
|
121 Lutron
GRAFIK Eye QS
Occupancy
sensor
|
wiring QS Link power supply
Individual QS or QS Wireless power supply
QSPS-P1-1-50
The power supply may be surface mounted by using the mounting tabs.
Unplug the power supply’s line voltage cable before wiring low voltage
terminal blocks. Line voltage cable included.
Parts
3-pin connector: Communication
to additional power supplies
2.77 in.
(70 mm)
4-pin connector: Power and
communication to QS shade
or keypads
1.2 in.
(31 mm)
4.03 in.
(102 mm)
Line voltage input
Com
Com
24V ---
MUX
24V ---
MUX
MUX
MUX
Com
Com
MUX
MUX
MUX
MUX
Mounting tabs
JBOX transformer
QSPS-J-1-50
The transformer is designed to be mounted on a junction box in a remote location away from occupants.
1.4 in
(36 mm)
Maximum devices powered
from one QSPS-1-50
Total wire length of link (B)
based on wire gauge
2
AWG
Total wire length#18
of link
(B) (1 mm )
#12wire
AWG
connector #16 AWG
GRX-CBL2 wire gauge
based
(1.5
mmon
)
(4 mm2)
346S-500
#18 AWG (1 mm2)
#16
AWG
#12
AWG
250 ft.
100 ft.
50
ft.
Controls
GRX-CBL2
2
None
)
(1.5
(4m)
mm
Hot/Live(75
(120
V~ 50/60 Hz)
(30
m)mm )
(17
m)
346S-500
Maximum devices powered
Black
ShadesfromGreen
Controls White
one QSPS-1-50
1 Sivoia
QS
Shades
shade Ground/
Earth
24 V-
Parts
Neutral
Up to 8
250
1200
ft. ft.
500100
ft. ft.
30050
ft. ft.
None
® QS
seeTouch
(75
m)
(30
m)
(17
(350 m)
(150 m)
(75 m) m)
keypads*
Up to 8
1200 ft.
500 ft.
300 ft.
® QS
None QS keypads
seeTouch
* 2 seeTouch
may be
exchanged for 1 control interface (QSE-CI-NWK-E)
(350 m)
(150 m)
(75 m)
keypads*
1 Sivoia QS
None
shade
* 2 seeTouch QS keypads may be exchanged for 1 control interface (QSE-CI-NWK-E)
|
Lutron 122
A
A
|
wiring power panel
QSPS-P1-10-60
B B
D
C
with cover
Dimensions
without cover
120 V~
10.3 in. (262 mm)
9.5 in. (241 mm)
17.5 in. (445 mm)
3.9 in. (99 mm)
The Sivoia® QS power panel uses
8 A maximum of one power panel
per 15 A circuit, two panels per
20 A circuit.
Lutron recommends using high
magnetic circuit breakers for
power panels.
QSPS-P1-10-60
|
123 Lutron
C
D
.35 in (9 mm) (white)
|
wiring Lutron supplied cable
Sivoia® QS cable
Lutron offers two types of QS cable which incorporate
both power and communications into the same bundle.
16 AWG (1.5 mm²) (black)
16 AWG (1.5 mm²) (red)
22 AWG (0.50 mm²) (violet)
22 AWG (0.50 mm²) (gray)
22 AWG (0.50 mm²) Drain
.35 in (9 mm) (white)
12 AWG (4 mm²) (black)
12 AWG (4 mm²) (red)
22 AWG (0.50 mm²) (violet)
22 AWG (0.50 mm²) (gray)
22 AWG (0.50 mm²) Drain
.45 in (11.5 mm) (white)
QSH-CBL-M-500 Cable
QSH-CBL-L-500 Cable
•
Description
Non-plenum rated cable for use with Sivoia QS
(Plenum cable: QSH-CBLP-M-500)
Description
• Non-plenum rated cable for use with Sivoia QS
(Plenum cable: QSH-CBLP-L-500)
Specifications
• Listed as cable type CL3
• Available
ft. (150
m) spools
12 AWGin(4500
mm²)
(black)
• Five conductors:
AWG
mm²) (red)
- Common — 16 12
AWG
(1.5(4mm²)
- Power — 16 AWG (1.5 mm²)
- MUX Data — 22 AWG (0.50 mm²)
22 AWG
- MUX Data — 22 AWG
(0.50(0.50
mm²)mm²) (violet)
- Drain Wire — 22 AWG (0.50 mm²)
22 AWG (0.50 mm²) (gray)
• Total outer jacket diameter: 0.26 in. (6.6 mm)
• 300 V rated
22 AWG (0.50 mm²) Drain
• PVC sheath, 90° C rated
• UL/CSA listed
.45 in (11.5 mm) (white)
• ROHS compliant
Specifications
• Listed as cable type CL3
• Available in 500 ft. (150 m) spools
• Five conductors:
- Common — 12 AWG (4 mm²)
- Power — 12 AWG (4 mm²)
- MUX Data — 22 AWG (0.50 mm²)
- MUX Data — 22 AWG (0.50 mm²)
- Drain Wire — 22 AWG (0.50 mm²)
• Total outer jacket diameter: 0.45 in. (11.5 mm)
• 300 V rated
• PVC sheath, 90° C rated
• UL/CSA listed
• ROHS compliant
|
Lutron 124
|
wiring Lutron supplied cable
GRX-CBL-346S Cable
Description
• Non-Plenum rated cable for use with the
following Lutron systems:
- GRAFIK Eye ® 3000
- GRAFIK Eye ® QS
- Energi Savr Node TM
Specifications
• Listed as type CL3R or CMR cULus.
• Available in 500 ft (150 m) spool
• Five conductors:
- Common – 18 AWG (0.75 mm2)
- Power – 18 AWG (0.75 mm2)
- MUX Data – 22 AWG (0.25 mm2)
Twisted wire pair
- MUX Data – 22 AWG (0.25 mm2)
- Drain Wire – 24 AWG (0.2 mm2)
• Total Outer Jacket Diameter: 0.21 in (5.3 mm)
• 300 V rated
• PVC sheath, 75° C rated
• UL listed
• Rated FT4
• cULus or CSA Listed
• Capacitance of 22 AWG (0.25 mm2) Twisted
Wire Pair:
- Conductor to shield: 48 pf/ft max
- Conductor to Conductor: 25 pf/ft max
}
|
125 Lutron
|
wiring power panel wiring diagram
System wiring overview: QS Wireless power supply panel
Sivoia® QS Wireless
roller shade
Sivoia QS Wireless
tensioned shade
Sivoia QS Wireless
drapery track
2-conductor wire length,
gauge and number of
shades or draperies
varies. Refer to QS
Wireless Power Supply
Panel Wiring Guide below.
QSPSY-P1-10-60
QS Wireless power supply panel
Sivoia QS Wireless
Power Supply
PanelSupply
Wiring Guidelines
QS Wireless
Power
Panel Wiring
Maximum
devicesper
per
Maximum devices
one output
one output
Shades/Drapery
Shades/Drapery
1 Sivoia
QS
Wireless
1 Sivoia
QS
Wireless
shade/drapery*
drive unit
shade/drapery*
drive unit
2 Sivoia QS Wireless roller 64™,
2 Sivoia
QSsq. m) each
≤ 30 sq.
ft. (2.75
Wireless roller 64TM,
3 Sivoia≤QS
roller 64,
30 Wireless
sq ft
≤ 20(2.75
sq. ft.
(1.80
sq.
m)
sq m) each each
Guide
Maximum distance per one output
based on wire gauge
Maximum distance per one output based on wire gauge
12 AWG 12 AWG
(4 mm²) (4 mm2)
16 AWG
16 AWG
18 AWG
18 AWG
(1.5 mm2)
(1.5 mm²)
(1 mm²)2
(1 mm )
QSHY-CBLP-M-1000
QSHY-CBLP-M-1000
500 ft 500 ft. (150 m)
(150 m)
200 ft. (60 m)
200200
ft ft. (60 m)
(60 m)
75 ft. (20 m)
3 Sivoia QS
2 Sivoia QS Wireless roller 100™, 200 ft
75 ft
Wireless roller 64,
≤ 50 sq. ft. (4.6 sq. m) each
(60 m)
(20 m)
≤ 20 sq ft
(1.8
sq m)
each Individual Power Supply Wiring Guidelines
Sivoia QS
Wireless
2 Sivoia QS Wireless
1 Sivoia
QS TM ≤50 sq ft
roller 100
250 ft. (75 m)
100 ft. (30 m)
shade/drapery*
(4.6 sq m) each
125 ftft. (38 m)
100
(30 m)
50 ft. (15 m)
50 ft
(15 m)
50 ft. (15 m)
* roller 20TM, roller 64, roller 100, roller 150TM, roller 200CW, roller 225TM, D105, D145, D175,
tensioned shades, KirbéTM, Roman shades
* roller 20™, roller 64, roller 100, roller 150™, roller 225™, roller 300™, D105, D145, D175, tensioned shades,
Kirbé®, Roman shades, Venetian blinds, horizontal sheer blinds, Pleated and Fashion Honeycomb shades Lutron 126
** 2 seeTouch QS keypads may be exchanged for 1 control interface (QSE-CI-NWK-E)
|
|
wiring overview
One shade/drapery per output with individual power supply
Sivoia® QS Wireless shade/drapery
Refer to wire length chart
on page 125 for wire gauge
and distance requirements
Pico® wireless
control
Battery powered
(3 V battery included)
120 V~
60 Hz
Sivoia QS Wireless
seeTouch® keypad
SZ-PS-P1-1-50
One shade/drapery per power panel output
Sivoia QS Wireless shade/drapery
Refer to wire length chart
on page 125 for wire gauge
and distance requirements
Sivoia QS Wireless shade/drapery
Pico wireless
control
Battery powered
(3 V battery included)
|
127 Lutron
120 V~
60 Hz
120 V~
60 Hz
Sivoia QS Wireless
seeTouch keypad
QSPSY-P1-10-60
A
A
|
wiring power panel
Dimensions
QSPSY-P1-10-60
B B
QSPSY-P1-10-60
10.30 in (262 mm)
3.90 in
(99 mm)
9.50 in (241 mm)
18.30 in
(465 mm)
with cover
with cover
Dimensions
D
D
17.50 in
C
(444 C
mm)
without cover
without cover
120 V~
10.3 in. (262 mm)
9.5 in. (241 mm)
17.5 in. (445 mm)
3.9 in. (99 mm)
The Sivoia® QS power panel uses
8 A maximum of one power panel
per 15 A circuit, two panels per
20 A circuit.
Lutron recommends using high
magnetic circuit breakers for
power panels.
(See page 122 for individual
power supply options.)
QSPSY-P1-10-60
|
Lutron 128
|
wiring Lutron supplied cable
Sivoia® QS Wireless cable
Lutron offers power cable for Sivoia QS Wireless systems.
16 AWG (1.5 mm²) (black)
16 AWG (1.5 mm²) (red)
.206 in. (5 mm) (white)
QSHY-CBL-M-1000
Description
• Non-plenum rated cable for use with
Sivoia QS Wireless systems
(Plenum cable: QSHY-CBLP-M-1000)
Specifications
• Listed as cable type CL3
• Available in 1,000 ft. (300 m) spools
• Five conductors:
- Common — 16 AWG (1.5 mm²)
- Power — 16 AWG (1.5 mm²)
• Total outer jacket diameter: 0.206 in. (5 mm)
• 300 V rated
• PVC sheath, 90° C rated
• UL/CSA listed
• ROHS compliant
|
129 Lutron
Integration for total light control
|
Lutron 130
|
integration for total light control single room
Single room total light control
Integration
Sivoia® QS
Sivoia QS Wireless
GRAFIK Eye® QS
GRAFIK Eye QS wireless
Part number
QSG
Description
Sivoia QS and GRAFIK Eye QS
communicate seamlessly via the QS
communications link, allowing for scenes
including both lights and shades.
QSGRJ
Sivoia QS Wireless and GRAFIK Eye QS
Wireless communicate seamlessly via
the QS communications link, allowing for
scenes including both lights and shades.
For more product integration possibilities, visit www.lutron.com.
Note: contact closure interfaces are available for all systems.
|
131 Lutron
|
integration for total light control whole house
Whole home total light control
Integration
Sivoia® QS
Sivoia QS Wireless
HomeWorks® QS processor
RadioRA® 2 main repeater
Part number
HQP6-2
Description
The processor provides intelligence for
automating lights and Sivoia QS shades
at different times of day.
RR-MAIN-REP-WH
RadioRA 2 main repeater natively
supports Sivoia QS wireless shades,
keypads, and RadioRA 2 components
without additional interfaces. Allows for
up to 100 devices.
For more product integration possibilities, visit www.lutron.com.
|
Lutron 132
|
integration for total light control whole building
Whole building total light control
Sivoia® QS
Integration
Sivoia QS Wireless
Quantum®
n/a
n/a
Part number
QP2
Description
Provides a centralized connection point
for Lutron EcoSystem®, digital
ballast modules, Lutron power panels,
GRAFIK Eye® QS, and Sivoia QS shades.
For more product integration possibilities, visit www.lutron.com.
|
133 Lutron
n/a
|
integration for total light control third-party integration
Third-party integration
Integration
Sivoia® QS
Sivoia QS Wireless
RS232 and IP interface
BACnet® communication through
Quantum® processor and
HomeWorks® QS processor.
HomeWorks QS processor and hybrid
repeater.
Requires PC programming.
Part number
QSE-CI-NWK-E
Description
QSE-IO
Provides an access point for QS-based
systems through RS232 or TCP/IP over
Ethernet, allowing third-party devices to
control and/or monitor a QS system.
HQP6-2
HQR-REP-120
HomeWorks QS natively supports IP
integration with Sivoia QS wireless
shades, keypads, and HomeWorks QS
components with use of a hybrid repeater.
Allows for up to 100 devices per RF link.
For more product integration possibilities, visit www.lutron.com.
|
Lutron 134
The Lutron Design Collections
|
135 Lutron
|
fabric selection overview
Introducing the Lutron Design Collections
Curated from the finest materials from leading fabric manufacturers all over the world, our newly
refreshed and redesigned fabric offering brings Lutron window treatments to the forefront of fashion.
These design-focused collections unite the quality you expect with the variety you need, and expand
our product line to include new shade styles.
The Lutron Design Collections have solutions for every style and project—see how we can put
your individual style in motion.
The Gallery Collection
The Gallery Collection is an extensive line of fashion fabrics for roller
shades, horizontal sheer blinds, pleated shades, and honeycomb shades.
Choose from a variety of rich fabrics in warm neutrals, fresh whites, and
bright colors that pop, as well as five opacities: sheer, translucent,
black-out, light-filtering, and room-darkening.
Roller Shades
NEW Horizontal
Sheer Blinds
NEW Fashion
Pleated Shades
NEW Fashion
Honeycomb Shades
The Avant Collection®
Beautiful, sophisticated soft fabrics and natural woven woods define
this collection of Kirbé® vertical drapery, traditional drapery, and
Roman shades. Earth tones and crisp, clean whites anchor this
selection of timeless window treatments. The Avant Collection also
includes a full line of distinctive Venetian woods and aluminums
designed to complement any taste.
Kirbé® Vertical
Drapery
Drapery
Roman Shades
Venetian Blinds
|
Lutron 136
|
fabric selection overview
The ClassicoTM Collection
Look to the Classico Collection for performance fabrics designed to suit
any commercial or residential application. This functional collection is
available in sheer, dim-out, and blackout opacities, so you can choose
the amount of sunlight you want entering the space. Sheers, which have
open weaves, filter sunlight while preserving the view. Dim-outs permit
some light penetration, but limit the view to shapes and shadows.
Blackouts prevent all light from passing through, and when combined
with side channels and top treatments, ensure a complete light seal.
Roller Shades
Tensioned Roller
Shades
Cable-Guided
Roller Shades
The Euro Collection with Coulisse
Fashion meets technology when Coulisse—a premier European
brand in window fashion—and Lutron come together in this stylish
collection. Choose from four fabric lines: Elegance, Tranquil, Bold,
and Impact for roller shades, XL Pleats, and Venetian blinds. Colors
range from warm browns and rich indigoes to vibrant yellows, sweet
pinks, and powerful blacks.
Roller Shades
|
137 Lutron
XL Pleats
Venetian Blinds
Choosing the right fabric is critical to a successful
shading project. Fabric selection is determined by
evaluating the orientation of each elevation and
the designer’s objectives.
Before specifying fabric:
Consider the application
Commercial or residential?
• Multi-purpose or dedicated function rooms?
• Day, night, or all-hours use?
• What types of activities will occur in the space?
• Will an aesthetic match be important inside or
outside the building?
•
Consider sustainability
Often fabrics are manufactured with chemicals
to make them durable. Lutron sustainable
fabrics reduce or remove many of these
chemicals in order to improve indoor air quality.
Others are made from recycled content in order
to protect the environment. Refer to the Lutron
Fabric Collections app to find which fabrics are
either PVC-free, recycled, GREENGUARD®,
Cradle to Cradle, or Oeko-Tex® Standard 100
certified material.
Prioritize needs
• Control glare inside (reduce reflections on
computer monitors and TVs)
• Maintain view through shades
• Protect interiors from fading
• Reduce solar heat gain
• Achieve a particular aesthetic (inside or outside)
• Reduce environmental impact by selecting a
sustainable fabric
• Create privacy
• Create a darkened room
If a space is multi-purpose or several priorities
are equally important, consider a dual-mount
application with two fabrics on the same window
(typically a sheer coupled with a dim-out
or blackout).
|
Lutron 138
|
fabric selection roller fabric rules
Roller shade fabric rules
Railroading
Railroading fabric is an option for applications
requiring shades wider than the usable roll width.
Railroading rotates the fabric 90 degrees from its
typical orientation. If the fabric has a distinct pattern,
please note that this pattern will also be rotated
90 degrees, which will alter the final appearance
of the shade.
Standard shade
Railroaded shade
For applications
that are narrower
than the usable
roll width
For applications that are
wider than the usable
roll width
Seaming/Welding
Some fabrics can be seamed/welded together in
order to increase the size of a railroaded shade
beyond its fabric roll width. This technique is used
to achieve long, wide shades. If a fabric has a
distinct pattern, aligning the pattern during seaming
may alter the final appearance of the shade.
Railroaded and seamed shade
Seam/weld
For applications that require a
railroaded shade and a length that
exceeds the usable roll width
|
139 Lutron
|
fabric selection bottom bars
The Lutron bottom bar offers a clean aesthetic at the base of the shade. It is available in half-wrap or
exposed styles.
Light-blocking wool pile is available for blackout shades with a 1 inch exposed bottom bar. Optional side
channels are also available for a complete light seal in blackout applications.
The bottom bar is available in White, Anodized Aluminum, Black, Bronze, Light Ivory, Taupe, or Slate Grey.
The endcaps are White, Grey, Black, Bronze, Light Ivory, Taupe, or Slate Grey, and coordinate with the
exposed bottom bar color or with the fabric on half-wrap bars.
Facing room
Side view
Sealed (2 sizes available)
Facing room
Half wrap architectural
Side view
Facing room
Side view
Oval
(For use with cable-guided shades.)
Facing room
Exposed architectural
Side view
NEW Designer hembar
(style for battery-powered roller)
Facing room
1 inch exposed
Side view
|
Lutron 140
|
fabric selection sealed battens
Sealed battens
For shades that are very tall or very wide,
horizontal battens can be seamed into the
fabric to provide stability and help ensure the
best performance. (For use with Classico™
Collection fabrics only.)
Sealed batten
Examples:
Tall shade with battens
(Shown: approximately 16 ft. tall)
|
141 Lutron
Wide shade with batten
(Shown: approximately 15 ft. wide)
|
fabric selection soft treatment fabric rules
The following details can help when ordering and
installing The Avant Collection window treatments.
Privacy
Please note that some materials have open weaves.
Although they may block outside views during the
day, at night they may not provide sufficient privacy.
To achieve privacy for the Kirbé® vertical drapery
system, pair it with the optional roller shade feature.
For woven wood Roman shades, use a fabric lining.
Roman shades
Soft fabric Romans must be lined. Woven wood
Roman shades do not require lining.
Fabric relaxation
It’s natural for fabrics to “relax” and sometimes
lengthen over time. Soft fabrics, however, have been
stored on a roll until made into a drapery or Roman
shade. So when measuring for drapery length, please
allow proper clearances for sills and floors. Lining
drapery adds structure and can minimize relaxation.
Woven woods are a natural and sometimes heavy
shading material. These materials may relax over
time as well.
Consolidating orders
Fabric runs and woven wood dye lots are subject to
subtle variation. When ordering multiple shades for a
room or home, it is best to place the entire order at one
time, as opposed to breaking up the order. This will
ensure consistent color across all shades on a project.
Custom printing
Custom printing is available on select Avant Collection®
soft fabrics. Please contact Customer Service for
more information.
|
Lutron 142
|
fabric selection Customer’s Own Material (COM)
Customer’s own material (COM)
Drapery or Roman shade
We recognize the unique nature of your projects and
the need to match or coordinate window treatments
with existing furnishings. This service allows you to
select materials outside of our standard offering,
giving you the freedom to create your own design
while still providing the reliable motorization of
Lutron. Simply follow this easy 3-step process:
Choose your shade style and custom fabric for
preliminary qualification
Once you have selected your preferred fabric, simply
submit the following details to
[email protected] or 1-800-446-1503
to receive preliminary qualification: Fabric weight,
fabric thickness, intended application, useable
fabric width, and fabric manufacturer.
Send us your SCT quote and a sample of your
fabric for testing
If the fabric meets the preliminary qualifications,
you will need to send a material sample (width
of roll x 1 yard height), for engineering review. A
customer service representative will supply you
with a COM# and shipping address.
Send us the required fabric needed for production
Our shade manufacturing facility will evaluate your
material to confirm it is suitable for your desired
window treatment application. If so, a customer
service representative will provide a quotation,
COM#, amount of material needed, and shipping
address for the required material.
To find a Lutron Qualified Shade Provider, please
contact Customer Service at 1.888.588.7661,
contact your local Lutron representative, or
visit www.lutron.com for our “Where to Buy”
dealer locator.
|
143 Lutron
NEW Custom printing program
Traditional or Kirbé® vertical drapery
ive your space a personal touch by reproducing
G
a favorite painting or custom design on a Lutron
approved fabric. Follow the easy steps below to
supply your own design, or choose from one of our
pre-designed patterns. Simply follow this easy
3-step process:**
Custom printed standard patterns
Looking for a signature design but don’t have a
pattern in mind? These three popular palettes
add a fresh touch to any space. Available for
traditional and Kirbé vertical draperies, choose
one of the following prints and add a unique
shading style to any space.
Select your design
Choose from four standard prints in 12 color
combinations or supply your own print or
pattern and email your request to
[email protected]
Submit your order
Once you have submitted your custom printing
request, the Lutron Custom Printed Drapery Team
will provide you with a quote.
Approve your proof
The Lutron Custom Printed Drapery Team will email
a PDF proof of your drapery order, which must be
reviewed and approved in order for production to
begin. Once the artwork is approved, it will take 8
weeks for your order to be printed, assembled,
and shipped.
Billie—Bold
CP-BLLE-B
To find a Lutron Qualified Shade Provider, please
contact Customer Service at 1.888.588.7661,
contact your local Lutron representative, or visit
www.lutron.com for our ‘Where to Buy’ dealer
locator.
*
**
From approval of quote and receipt of materials.
Prior to submitting Custom Printing Files, it is important to align
with a Lutron qualified shade provider to assist with the quotation
process. Projects must be submitted with an RFQ file from the
Lutron shade configuration tool (SCT).
Aretha—Traditional
CP-ARTHA-T
|
Lutron 144
|
fabric selection stocking categories
Stocking categories
Please visit www.lutron.com/binders to
Lutron roller shade fabrics have been divided into
register your binder in order to receive
three stocking categories. This stocking program
binder update kits in the future.
allows us to offer a wider variety of fabrics for
Category 3 — Custom
your use. All Gallery Collection fabrics and
• Completed shades are available for shipping in
Lutron Coulisse Collection fabrics currently
a minimum of 30 business days from receipt
fall into Category 2 — Premium. Classico™
Collection fabrics fall into different categories.
of order — subject to availability.
• Memo samples are to be provided by the
To determine which are stocked, premium, or
fabric supplier. Contact your Lutron customer
custom, please refer to the matrices earlier in this
service representative to process these
chapter. Please review the categories below for
samples. Once an order has been placed
fabric availability information and product support.
fabric samples will be shipped directly to you
Category 1 — Stocked
from the fabric supplier.
•
• Fabric binder cards will NOT be available for
Completed shades are available for shipping
within 15 business days from receipt of order.
custom fabrics.
Category 2 — Premium
• Completed shades are available for shipping within
20 business days from receipt of order.
Please note that the following sampling
information applies to both Category 1
and Category 2 fabrics only:
• Memo samples will be processed within 48 to
72 hours. Refer to the SCT under “Marketing
Materials” for model numbers or call your
Lutron customer service representative
for assistance.
• Fabric binders are available for these fabrics.
Refer to the SCT under “Marketing Materials.”
|
145 Lutron
|
Lutron 146
|
specification the Lutron difference
Aesthetics
Flexibility and performance
Minimal, symmetrical light gaps
Lutron roller shade systems offer light gaps
of .75 inch per side.
Limits and presets never lost
Limits and preset shade positions are electronically
precision-set and locked, providing power failure
memory for up to 10 years. These limits and presets
will never slip regardless of age, electrostatic
discharge, or power failure.
Elegant control options
Lutron controls are designed to match high-end
working and living spaces and are available in a
wide variety of colors and finishes, including metals.
Wide array of fabrics
Lutron shading systems are available in sheer,
dim-out, and blackout fabrics to suit any function
or aesthetic need, including many PVC-free
fabric choices.
Intelligent Hembar Alignment™
All shades in a Lutron shading system will track
together and stop at programmable preset
positions to within .125 inch. By utilizing intelligent
hembar alignment, roller 20™, roller 64™, roller
100™, roller 150™ roller 225™, and roller 300™ shade
systems will move and track together, even though
they use different size roller tubes.
|
147 Lutron
Sustainable design and LEED®
Lutron solutions can contribute
to 40 or more of the 110 possible
points in LEED® NC, CS, or S.
System warranty and support
Lutron shading systems come with an 8-year
limited warranty, plus optional extended service.
Lutron has factory-employed field service
engineers throughout the world and is the only
lighting control or shade systems manufacturer
in the world with a 24-hour, 7 days a week
technical support center.
Control
Installation
Ultra-quiet electronic drive
Lutron systems are low-voltage and operate at
a near-silent level — rated at 38 dBA at 3 feet
(roller 20™ operates at 44 dBA and roller 300™
operates at 50 dBA). Shades move smoothly and
stop at preset positions with no audible clicks.
Simple reconfiguration
Lutron systems can easily be reconfigured, limits
can be changed, and presets can be reprogrammed
without rewiring by using the remote, keypad, or
electronic drive unit (EDU).
Total light control
Lutron lighting control systems integrate with
Lutron shading systems, offering intuitive control
of both electric light and daylight.
Simplified wiring
Lutron shading systems do not require any group
controllers, relays, or line-voltage wiring between
EDUs. Wiring can be simplified by using an optional
power panel, allowing all system wiring to be run to
one convenient location.
|
Lutron 148
specification
Shade and Fashion Honeycomb
| Pleated
Shade Selection Guide
Residence:_____________________ Room:_____________________ Window(s):_______________
Important: If you plan on installing the shade in a place where you need to raise the entire shade above an
obstacle (such as above doors that open), please refer to our stacking guidelines (P/N 368-2942) or contact
Customer Service to determine how high to mount your shade.
Step 1
Option A: Inside Mount Measurements
Inside Mount Measurements
of window must be at least 1½" (38 mm) to use inside mounting option (partial).
• Depth of window must be at least 2¾” (70 mm) to use inside mounting option (full).
• Do not make any deductions from the width! Lutron will deduct 1/8" (3 mm)
per side on inside mounted shades to allow room for proper operation.
• Lutron will make NO additions or deductions to the height measurement.
• Depth
Width:
A
B
C
(Circle one)
A
inches/mm
B
C
(Circle one)
inches/mm
E
inches/mm
inches/mm
F
inches/mm
inches/mm
Order height:
(Largest of the three measurements)
Option B: Outside Mount Measurements
Order width:
inches/mm
|
E F
inches/mm
Width: T
he width of your shades is up to you.
For example, if you’d like to completely
cover the window, measure from edge
to edge of the frame.
149 Lutron
D
D
inches/mm
Order width:
(Smallest of the three measurements)
Step 1
Height:
Side
view
Height: M
easure from the top of the
trim to the windowsill.
Order height:
inches/mm
Side
view
Step 2
XL Pleat
Select Pleat Style and Fabric
Fashion Pleat
Fashion Honeycomb
Fabric Color: ________________________________________
(see lutron.com/fabrics)
Fabric P/N: _________________________________________
(see Lutron Coulisse Collection Impact binder or Gallery Collection binder)
See Gallery Collection binder, Euro Collection Impact Binder, or lutron.com/fabrics for more information.
Please visit www.lutron.com/fabrics for more information or download the Lutron Design Collections
app from the App Store.
|
Lutron 150
|
Tensioned Shade Selection Guide
specification Roller
Sivoia QSand
and Sivoia QS Wireless only (not for battery-powered shades)
®
Residence:_____________________ Area:_______________________ Window(s):_______________
Step 1
Select Style
Roller Shade
Step 2
Skylight/Angled
Bottom-up
Select Mounting Option
Inside window
jamb or
window well
Step 3
Outside window
jamb or
window well
Pocket mount*
Recessed into window (Recessed into
well so frame is hidden*
ceiling)
*For skylight and bottom*Roller shades only
up applications only
Select Fabric Orientation
If specifying a skylight
or bottom-up shade,
skip to Step 4.
Window
Regular (with fabric
closest to the glass)
Step 4
Window
Reverse* (with fabric farthest from the glass)
*Recommended to clear door or
window hardware.
Measure Height and Width
Measure to the nearest 1/8 of an inch.
A
|
151 Lutron
B
C
A
inches
B
inches
C
inches
D
E
F
D
inches
E
inches
F
inches
Step 5
Select Fabric
Fabric and Color Name (Note: not all fabrics are compatible with skylights and bottom-up)
________________________________________________________________________________________
Fabric Model Number_____________________________________________________________________
Custom Printed Material—Digital file must be provided as a .tif file at 100 ppi or higher.
Customer’s Own Material (COM)—Please provide samples the size of the largest length and width
indicated in Step 4.
*Utilize the ClassicoTM Collection, Gallery Collection, or Euro Collection roller fabric binders or go to
www.lutron.com/fabrics to select the right fabric for your application.
Step 6a
Select Bottom Bar
If specifying a skylight or bottom-up shade, skip to Step 6b.
Exposed
Architectural
exposed
Architectural
half wrap
Sealed
Sealed
(without end cap) (with end cap)
Note: Fabric selected may not be compatible with all bottom bar options. Exposed bottom bar is not
available with fabrics from the Lutron Coulisse Collection.
Step 6b
Select Bottom Bar or Frame Color
Clear Anodized
Taupe*
White
Light Ivory*
Black*
Slate Gray*
Bronze*
Custom Color____________________________________________________________________________
*Black, Taupe, Light Ivory, Slate Grey, and Bronze have an added lead time and cost for skylights, angled,
and bottom-up shades.
Please note: Product options may vary depending on application and intended use. For more
technical information, reference the Lutron shading solutions product guide (P/N 367-1455) located at
www.lutron.com or work with your Lutron qualified installer. Product availability is subject to change.
Please contact your local Lutron sales representative for more information on ordering product.
Please visit www.lutron.com/fabrics for more information or download the Lutron Design Collections app
from the App Store.
|
Lutron 152
|
specification Roman Shade Selection Guide
Residence:_____________________ Area:_______________________ Window(s):_______________
Step 1
Select Style
Flat
Knife Pleat
Hobbled
Casual
Note: Woven woods are only available in flat style.
Step 2
Select Mounting Option
Inside window jamb*
Outside window jamb
*Not available with casual pleat style
Step 3
Select Control Option
Window
Window
Front Control*
(with fabric closest to the glass)
*Recommended when light gaps are
a concern.
Step 4
Back Control*
(with fabric farthest from the glass)
*Recommended to clear door or window hardware.
Measure Height and Width
Measure to the nearest 1/8 of an inch.
A
|
153 Lutron
B
C
A
inches
B
inches
C
inches
D
E
F
D
inches
E
inches
F
inches
Step 5
Select Fabric
Avant Collection® Fabric Name and Color (sheers cannot be used)________________________________
________________________________________________________________________________________
Fabric Model Number_____________________________________________________________________
Customer’s Own Material (COM)—Please provide a sample with this sheet. (Sample should be the roll
width x 18 inches.)
Step 6
Select Lining
Lining Name and Color* ___________________________________________________________________
________________________________________________________________________________________
Lining Model Number______________________________________________________________________
*Note: lining is required for soft fabric Roman shades
Step 7a
Select Edge Binding (optional)
Edge binding is fabric or twill material wrapped around the edges of a woven wood Roman shade to
provide a decorative frame that is visible on both sides of the shade.
Yes
Step 7b
No
Select Binding Location
2 edges (horizontal)
Step 7c
2 edges (vertical)
4 edges
Select Binding Width
1¼ inches
(⅝ inches of binding shows on front and
back of shade)
Step 7d
3 edges
3 inches
(1½ inches of binding shows on front and
back of shade)
Select Binding Color
Color Name______________________________________________________________________________
Please contact your local Lutron sales representative for more information on ordering product.
Please visit www.lutron.com/fabrics for more information or download the Lutron Design Collections app
from the App Store.
|
Lutron 154
|
specification Drapery System Selection Guide
Residence:_____________________ Area:_______________________ Window(s):_______________
This guide can be used to specify drapery systems with or without fabric, except Kirbé®, which must be
ordered with fabric.
Step 1
Select Style
Center draw
Step 2
Right draw
Left draw
Kirbé vertical drapery system
Select Mounting Option
If specifying Kirbé, skip to Step 4.
On the wall
Step 3a
On the ceiling
Step 4
Step 3b
Select Track Shape
Straight
Curved
Recessed into the ceiling to conceal track
Bend
Select Track Type
Single
Tandem
Dual
Dual Tandem
Measure Height and Width
For straight tracks:
Height
Width
inches
inches
Curved tracks require a template. Contact your qualified Lutron installer.
Please note: Product options may vary depending on application and intended use. For more
technical information, reference the Lutron shading solutions product guide (P/N 367-1455) located at
www.lutron.com or work with your Lutron qualified installer. Product availability is subject to change.
|
155 Lutron
Step 5
Select Pleat Style
If specifying Kirbé®, skip to Step 6a.
For Ripplefold only:
Select the fullness of drapery
80%
100%
Pinch Pleat
Step 6a
120%
80%
Ripplefold
Select Fabric
80%
100%
80%
100%
100%
120%
120%
120%
Avant Collection® Fabric Name and Color_____________________________________________________
Fabric Model Number_____________________________________________________________________
Custom Printed Material—Digital file must be provided as a .tif file at 100 ppi or higher.
Customer’s Own Material (COM)—Please provide a sample with this sheet.
Step 6b
None
Select Lining
Avant Collection Lining Name and Color______________________________________________________
None (Lining cannot be used with Kirbé)
Step 7
Bronze
Select Track Color
White Clear Anodized
Custom Color_________________________________ Cornice Selection Guide
Cornices may be used on the Kirbé and traditional drapery track systems, as well as Lutron roller shades.
They afford flexibility as they permit outside mounts for shading systems with no construction of pockets.
Step 1
Select Cornice
Shape A
Shape B
Shape C
Shape D
Straight
Step 2
Select Fabric
Avant Collection Fabric Name and Color
_______________________________________________
Fabric Model Number____________________________
Custom Printed Material (Please provide digital file)
Customer’s Own Material (Please provide a sample)
None
Step 3
White
Select Lining Color
Off-white
Please contact your local Lutron sales representative for more information on ordering product.
|
Lutron 156
|
specification Venetian Blind Selection Guide
Residence:_____________________ Area:_______________________ Window(s):_______________
Step 1
Select Mounting Option
Inside window jamb
Step 2
Outside window jamb
Measure Height and Width
Measure to the nearest 1/8 of an inch.
A
A
Step 3
B
C
inches
D
D
inches
E
inches
F
inches
E
B
inches
C
inches
F
Select Slat Finish
Color Name______________________________________________________________________________
Color Model Number______________________________________________________________________
Custom Color Matching—Sample of finish being requested must be submitted.
See Venetian binder, Euro Collection Impact binder, or lutron.com/fabrics for more information.
|
157 Lutron
Step 4
Select Valance Style
3½ in.
Camelot
None
Note: Euro Collection Venetians do
not have their own valance. They
can be paired with one of the styles
of Avant Collection® valances with
Avant finishes, and must be ordered
as separate line items.
4½ in.
Majesty
Step 5
Select Valance Finish (if applicable)
Color Name______________________________________________________________________________
Color Model Number______________________________________________________________________
Custom Color Matching—Sample of finish being requested must be submitted.
Step 6
Select Decorative Tape (optional)
Color Name______________________________________________________________________________
Color Model Number______________________________________________________________________
None
Please note: Product options may vary depending on application and intended use. For more
technical information, reference the Lutron shading solutions product guide (P/N 367-1455) located at
www.lutron.com or work with your Lutron qualified installer. Product availability is subject to change.
Please contact your local Lutron sales representative for more information on ordering product.
Please visit www.lutron.com/fabrics for more information or download the Lutron Design Collections
app from the App Store.
|
Lutron 158
|
specification Sivoia® QS Triathlon® Selection Guide
Residence:_____________________ Room:_____________________ Window(s):_______________
Step 1
❑
Select Shade Style
Honeycomb
❑
Roller Headrail without fascia
Fabric-wrapped fascia (regular roll only)
Roll orientation
Glass
Step 2
Regular –
fabric closest
to the glass
(standard)
Reverse –
fabric farthest
from the glass.
Glass
Recommended
to clear door or
window hardware.
Select Power
Battery powered
Step 3
Plug-in
Power
panel
Manual
shade
Select Control
❑ System
Keypad
Timeclock
Mobile
device
Third-party
integration
Pico® wireless
control
❑ Stand-alone
Pico® –
4-group RF –
for controlling a single
shade or multiple shades
with one button press.
for assigning a group
of shades to each of
the four group buttons
on the remote.
Please note: Product options may vary depending on application and intended use. For more technical information,
reference www.lutron.com or work with your qualified Lutron provider. Product availability is subject to change.
|
159 Lutron
Step 4
❑
Shade Mount and Measurements (choose one)
Inside mount
Roller shade
Honeycomb shade
With fascia
Fully recessed
Without fascia
Fully recessed
Fully recessed
33/8”
31/8”
21/2”
(86 mm)
(80 mm)
(64 mm)
Please note: For partial recess, the location of the mounting screw is 0.5” (13 mm) in from the back of the
bracket for roller shades and .75” (19 mm) for honeycomb shades.
Width:
Height:
D
inches/mm
inches/mm
E
inches/mm
C
inches/mm
F
inches/mm
Smallest width:
inches/mm
Largest height:
inches/mm
❑
A
A
inches/mm
B
B
C
Outside mount on trim
Width: The width of your shades can be as
wide as you want, depending on what
you want the fabric to cover.
Width:
inches/mm
D
❑
E
F
Outside mount above trim (includes spacers)
Height: Measure from the top of the
headrail to the windowsill.
Height:
inches/mm
Note: If mounting above the trim, we recommend allowing for at least 31/8" (80 mm) for honeycomb,
4.5" (114 mm) for roller, of space above the top edge of the window trim for the shade brackets.
|
Lutron 160
Step 5
Select Fabric
For more information, please download
The Lutron Fabric Collections app from
the App Store.
Utilize the Insulating Honeycomb or Roller Essentials fabric
binder or visit www.lutron.com/fabrics
Fabric P/N: __________________________________________
Step 6
Honeycomb Shade Enhancements
❑
Back cover
A back cover on the back of the
headrail eliminates any light that may
come through the mounting area
(usually only used on room darkening,
inside mount applications).
❑
Cable-guided
(outside mount only)
Select this if you are mounting
a shade to a door.
Choose anchor and matching
hardware color:
Snow Biscuit For more information, please visit www.lutron.com or call 1(800) 446-1503.
|
161 Lutron
Sienna
|
specification Horizontal Sheer Blind Selection Guide
Residence:_______________________ Area:________________________ Window(s):___________________
Step 1
Select Tube/Vane Size
2" vane / 15/8" tube
Step 2
Optional top treatment Fabric-wrapped fascia
3" vane / 21/2" tube
Select Mounting Option
IMPORTANT
Horizontal sheer blinds are built to a single, specific height. The blind
is tilted to the View position when fully extended. Please verify exact
shade height that is required for your application to the nearest 1/16
inch. The height measurement includes the top assembly and bottom
bar, so the dimension provided should reflect the height needed from
the top of the assembly in its mounted position to the fully lowered
bottom bar location (at the window sill, floor, etc). When in the Closed
position, the blind maintains a gap of 3/8” between the bottom of the
blind and the window sill, floor, etc.
Step 2
Option A: Inside Mount Measurements
• To
use inside mount, the window depth must be at least: 2 1/4” (57 mm) for both 2” and 3” vane
• To
be fully recessed, the window depth must be at least: 3 5/8” (92 mm) for 2” vane, 4 1/4” (108 mm) for 3” vane
• Do
not make any deductions from the width. Lutron will deduct 1/16” (2 mm) per side on inside mounted
shades to allow room for proper operation.
• Width
• Lutron
limitations: 2” vane (24”-96”); 3” vane (24”-114”)
will make NO additions or deductions to the height measurement.
Width:
Height:
A
A
inches/mm
D
inches/mm
B
B
inches/mm
E
inches/mm
C
C
inches/mm
F
inches/mm
Smallest width:
inches/mm
D
E
F
Smallest height:
inches/mm
|
Lutron 162
Step 2
Option B: Outside Mount On Trim Measurements
Width: T
he width of your shades is up to you. For example,
if you’d like to completely cover the window, measure
from edge to edge of the frame.
Order width:
inches/mm
Step 2
Height: Measure from the top of the
trim to the windowsill.
Order height:
inches/mm
Side
view
Option C: Outside Mount Above Trim Measurements
Width: T
he width of your shades is
up to you. For example, if
you’d like to completely cover
the window, measure from
edge to edge of the frame.
Order width:
inches/mm
Height: Determine where you’re going to mount the shade.
Then measure from where the top of the headrail
would fall, down to the windowsill.
Note: The motorized bracket is 2 5/8” (67 mm) high, however, it is
recommended to allow for at least 3 1/8” (80 mm) of space above the
top edge of the window trim (manual shade brackets require you to
allow for 1 5/8” (42 mm)).
Order height:
inches/mm
Side
view
Step 3
Select Fabric
Fabric and Color Name (Note: See Gallery Collection binder or www.lutron.com/fabrics)
________________________________________________________________________________________
Fabric Model Number_____________________________________________________________________
|
163 Lutron
Step 4
Select Top Back Cover Color
The selection here will determine the color of your top-back cover. Choosing any color other than White will
result in an increased charge.
White (default)
Bronze
Black
Light Ivory
Clear Anodized
Slate Grey
Taupe
Step 5
Select Hardware Color (for fabric-wrapped fascia only)
The selection here will determine the color of your fabric-wrapped fascia endcaps.
Lutron-recommended color
(pre-selected to coordinate with fabric color)
Clear Anodized
White
Bronze
Taupe
Light Ivory
Slate Grey
Black
Custom Color____________________________________
Please note: Product options may vary depending on application and intended use. For more
technical information, reference the Lutron shading solutions product guide (P/N 367-1455) located at
www.lutron.com or work with your Lutron qualified installer. Product availability is subject to change.
Please contact your local Lutron sales representative for more information on ordering product.
Please visit www.lutron.com/fabrics for more information or download the Lutron Design Collections
app from the App Store.
|
Lutron 164
|
specification Pleated and Fashion Honeycomb shades stack guide
Use these stacking guidelines if you plan on installing your Lutron XL Pleat, Fashion Pleat, or Fashion
Honeycomb shades in a place where you need to raise the entire shade above an obstacle (such as above
doors that open). These guidelines will help you determine how high to mount your shade, so that the shade
will clear the obstacle when it’s fully raised.
A=Stack height: the total height
of the fully raised shade from the
top of the bracket to the bottom
of the bottom rail
B=3.0 in (76 mm)—headrail height
C=0.5 in (14 mm)—bottom rail height
D = 1.5 in (39 mm)—bracket height
Note: Pleated fabric shown
Dimensions for A
Your Shade
Height
1 ft
2 ft
3 ft
4 ft
5 ft
6 ft
7 ft
8 ft
9 ft
10 ft
Barcelona
(Minimum)
3.625 in
(92 mm)
3.625 in
(92 mm)
3.75 in
(95 mm)
3.75 in
(95 mm)
3.875 in
(98 mm)
3.875 in
(98 mm)
4.00 in
(101 mm)
4.00 in
(101 mm)
4.125 in
(105 mm)
4.125 in
(105 mm)
Pleated
Amalfi
(Maximum)
3.75 in
(95 mm)
4.00 in
(101 mm)
4.25 in.
(108 mm)
4.50 in
(114 mm)
4.75 in
(121 mm)
5.00 in
(127 mm)
5.25 in
(133 mm)
5.50 in
(140 mm)
5.75 in
(146 mm)
6.00 in
(152 mm)
Banco
(Minimum)
3.625 in
(92 mm)
3.75 in
(95 mm)
3.875 in
(98 mm)
4.00 in
(101 mm)
4.125 in
(105 mm)
4.25 in
(108 mm)
4.25 in
(108 mm)
4.375 in
(111 mm)
4.50 in
(114 mm)
4.625 in
(117 mm)
Honeycomb
Studio
(Maximum)
3.75 in
(95 mm)
3.875 in
(98 mm)
4.00 in
(101 mm)
4.25 in
(108 mm)
4.375 in
(111 mm)
4.625 in
(117 mm)
4.75 in
(121 mm)
4.875 in
(124 mm)
5.125 in
(130 mm)
5.25 in
(133 mm)
Stack height varies by fabric. The maximum and minimum fabrics are shown for reference.
Please visit www.lutron.com/fabrics for more information or download
the Lutron Design Collections app from the App Store.
|
165 Lutron
|
specification Insulating honeycomb shades stack guide
Use these stacking guidelines if you plan on installing your Serena insulating honeycomb shades in a
place where you need to raise the entire shade above an obstacle (such as above doors that open).
These guidelines will help you determine how high to mount your shade, so that the shade will clear
the obstacle when it’s fully raised.
A=Stack height: the total height of the fully raised
shade from the top of the bracket to the bottom
of the bottom rail
B=1 5/8 in. (42 mm)—headrail height
C= 5/8 in. (16 mm)—bottom rail height
D=2 5/8 in. (67 mm)—bracket height
Dimensions for A
Cyprus
Your
Shade
Height
1 ft.
2 ft.
3 ft.
4 ft.
5 ft.
6 ft.
7 ft.
8 ft.
LightFiltering
2 3/4 in.
(70 mm)
3 in.
(77 mm)
3 1/8 in.
(80 mm)
3 3/8 in.
(86 mm)
3 5/8 in.
(93 mm)
3 3/4 in.
(96 mm)
4 in.
(102 mm)
4 1/8 in.
(105 mm)
RoomDarkening
2 7/8 in.
(74 mm)
3 in.
(77 mm)
3 1/4 in.
(83 mm)
3 3/8 in.
(86 mm)
3 5/8 in.
(93 mm)
3 3/4 in.
(96 mm)
4 in.
(102 mm)
4 1/8 in.
(105 mm)
Monaco and Rio
LightFiltering
2 7/8 in.
(74 mm)
3 1/8 in.
(80 mm)
3 3/8 in.
(86 mm)
3 5/8 in.
(93 mm)
3 7/8 in.
(99 mm)
4 1/8 in.
(105 mm)
4 3/8 in.
(112 mm)
4 5/8 in.
(118 mm)
RoomDarkening
2 7/8 in.
(74 mm)
3 1/8 in.
(80 mm)
3 3/8 in.
(86 mm)
3 5/8 in.
(93 mm)
3 7/8 in.
(99 mm)
4 in.
(102 mm)
4 1/4 in.
(108 mm)
4 1/2 in.
(115 mm)
DoubleCell
3 1/8 in.
(80 mm)
3 1/2 in.
(89 mm)
3 7/8 in.
(99 mm)
4 1/4 in.
(108 mm)
4 5/8 in.
(118 mm)
5 in.
(127 mm)
5 1/4 in.
(134 mm)
5 5/8 in.
(143 mm)
Designer Collections
Napa
3 in.
(77 mm)
3 3/8 in.
(86 mm)
3 3/4 in.
(96 mm)
4 1/8 in.
(105 mm)
4 1/2 in.
(115 mm)
4 3/4 in.
(96 mm)
5 1/8 in.
(131 mm)
5 1/2 in.
(140 mm)
Sedona
2 3/4 in.
(70 mm)
2 7/8 in.
(74 mm)
3 1/8 in.
(80 mm)
3 1/4 in.
(83 mm)
3 1/2 in.
(89 mm)
3 5/8 in.
(93 mm)
3 3/4 in.
(96 mm)
4 in.
(102 mm)
Prague
2 3/4 in.
(70 mm)
3 in.
(77 mm)
3 1/4 in.
(83 mm)
3 1/2 in.
(89 mm)
3 3/4 in.
(96 mm)
4 in.
(102 mm)
4 1/4 in.
(108 mm)
4 1/2 in.
(115 mm)
Note: For fire-rated fabrics, add 10% to stack height.
|
Lutron 166
Notes
|
167 Lutron
|
Lutron 168
Lutron proudly offers an extensive line of shading systems and corresponding
controls that are manufactured in the United States, enabling compliance with the
Buy American Act and the Buy American provision of the American Recovery and
Reinvestment Act (ARRA). Visit www.lutron.com/baa for the latest information.
www.lutron.com/shadingsolutions
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299
U.S.A.
World Headquarters +1.610.282.3800
Barcelona I Beijing I Berlin I Hong Kong I London I Madrid I Mexico City I
Milan I Paris I São Paulo I Shanghai I Singapore I Tokyo
Technical Support Center 1.800.523.9466
Shades Customer Service (and Quotes) 1.800.446.1503
Email: [email protected]
[email protected]
© 06/2014 Lutron Electronics Co., Inc.
P/N 367-1455 REV I
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement