McLean Cooling Technology | Genesis M52-0816-032 | Protective Cooling Catalog

Protective Cooling Catalog
Protective Cooling Catalog
Edition 10.1
Air Conditioners, Heat Exchangers
& Custom Solutions for Closed-Loop
Electronic Systems
Protecting Electronics.
Exceeding Expectations.™
Pages 132-147
CLIMAGUARD™
Pages 114-131
PROAIR™
Pages 104-113
Water-Cooled
Pages 34-67
Heat Exchangers
T-Series™
Pages 92-103
PROAIR™
Pages 68-91
GENESIS®
Pages 18-33
HOW TO SELECT 
Use this handy table to match your
electronic cooling requirements with
the most effective McLean protective
cooling solution.
Air Conditioners
New
SPECTRACOOL™
Quick Reference
SYSTEM APPLICATION
For indoor industrial
For harsh / corrosive environments
For wash-down applications
For data networking cabinets
For outdoor enclosures
For telecommunications shelters
TEMPERATURE OF THE ELECTRONICS
Cooler than outside the enclosure
Warmer than outside the enclosure
AIR CONDITIONER COOLING CAPACITY
1000-2000 BTU/Hr (300-700 Watts)
4000-6000 BTU/Hr (1200-1800 Watts)
8000-12000 BTU/Hr (2300-3500 Watts)
20000 BTU/Hr (5900 Watts)
2-ton 23500 BTU/Hr (6900 Watts)
3-ton 42000 BTU/Hr (12300 Watts)
5-ton 59000 BTU/Hr (17300 Watts)
HEAT EXCHANGER COOLING CAPACITY
Less than 20 Watts/°F (30 Watts/°C)
20-60 Watts/°F (30-100 Watts/°C)
More than 60 Watts/°F (100 Watts/°C)
POWER INPUT
115 & 230 AC Volt
400 / 460 AC Volt 3-phase
24 & 48 DC Volt
MOUNTING
Side
Top
Rack
CABINET PROTECTION
Type 12
Type 3R
Type 4
Type 4X Stainless Steel
CABINET DIMENSION
Fits 8” / 203 mm
Fits 12” / 305 mm
Fits 16” / 406 mm
Fits 20” / 508 mm or larger
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com
© 2010 Pentair Technical Products
GENESIS® Indoor Air Conditioners .....................................68
New Product Overview........................................................... 2
Why Use Pentair Technical Products.................................... 4
Why Use McLean Cooling Technology................................. 5
How To Select A Protective Cooling Solution
Protective Cooling Solution Overview
Why cool electronics in the first place? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Heat Ruins Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Sources of Heat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Trend Toward More Damaging Heat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
What are the consequences of damaging heat? . . . . . . . . . . . . . . . . . . . . 6
Options for Cooling Electronics
Conductive Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Fresh Air Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Protective Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Levels of Electronic Enclosure Protection
Protection Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
SCCR Requirements per UL (Condensed version) . . . . . . . . . . . . . . . . . . . 9
Selecting the Right Cooling Solution
Cooling Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Cooling Solution Choices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
How to Select the Right Cooling Capacity Air Conditioner
Air Conditioner Cooling Capacity Overview . . . . . . . . . . . . . . . . . . . . . . . 12
How to Determine Internal Heat Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
How to Determine Heat Transfer Load Overview . . . . . . . . . . . . . . . . . . 13
Simple Chart Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Equation Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
How to Determine Total Heat Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
How to Select the Right Cooling Capacity Heat Exchanger
Heat Exchanger Cooling Capacity Overview . . . . . . . . . . . . . . . . . . . . . . 15
How to Determine Internal Heat Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
How to Determine Heat Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
How to Determine Heat Exchanger Capacity . . . . . . . . . . . . . . . . . . . . . . 16
GENESIS® Top-Mount Air Conditioners .............................86
SPECTRACOOL™ Indoor and Outdoor Air Conditioners.18
Indoor and Outdoor Base Models..............................................................20
G52 Indoor Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
G57 Indoor Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Outdoor Heat Exchangers.........................................................................134
TX23 Indoor Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
TX33 Indoor Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
TX38 Outdoor Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
TX52 Outdoor Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
T-Series Indoor/Outdoor Air Conditioners........................34
Engineered Solutions..........................................................148
Indoor/Outdoor Air Conditioners..............................................................36
T15 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
T20 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
T29 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
T43 6000 BTU Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
T43 8000 BTU Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
T43 10000 BTU Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
T50 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
T53 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
T62 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
T70-36 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
T70-60 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Subject to change without notice
Top-Mount Air Conditioners.......................................................................88
MHB11 Models 2200 BTU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
MHB11 Models 4000 BTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
PROAIR™ Harsh Environment / Wash Down
Air Conditioners ..................................................................92
Harsh Environment / Wash Down Air Conditioners...............................94
CR23 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
CR29 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
CR43 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Water-Cooled Air Conditioners . .......................................104
Water-Cooled Air Conditioners............................................................... 106
33WC Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
CR43 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
LB11WC Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
PROAIR­™ Indoor Heat Exchangers ................................... 114
Indoor Heat Exchangers.............................................................................116
XR20 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
XR29-08 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
XR29-18 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
XR47-24 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
XR47-35 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
XR60-55 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
XR60-84 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
CLIMAGUARD™ Outdoor Heat Exchangers ....................132
Aftermarket Customer Support
Terms and Conditions - Warranty
Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Return and Repair Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Model Number Index...........................................................154
Aftermarket Services - Global Field Repair Network....156
800-896-2665 • McLeanCoolingTech.com ©
McLeanCoolingTech.com ©2010
2010Pentair
PentairTechnical
TechnicalProducts
Products
1
HOW TO SELECT
SPECTRACOOL™ Indoor & Outdoor Air Conditioner. . . . . . . . . . . . . . . . . 2
CLIMAGUARD™ Outdoor Heat Exchanger. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Indoor Air Conditioners...............................................................................70
M13 Models 1000 BTU/Hr.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
M17 Models 1800 BTU/Hr.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
M28 Models 2200 BTU/Hr.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
M28 Models 4000 BTU/Hr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
M28 Models 6000 BTU/Hr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
M33 Models 4000 BTU/Hr.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
M36 Models 6000 BTU/Hr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
M52-3 Phase Models 4100-10000 BTU/Hr.. . . . . . . . . . . . . . . . . . . . . . . . . . 83
Table of Contents
: 

: 
New Product Overview
➍
➊
➋
SPECTRACOOL™
Indoor & Outdoor Air Conditioner
Makes electronics cooling easier, so you can go about your business
HOW TO SELECT
Calm, cool and collected
EARTH-FRIENDLY
➎
➏
• Rotary compressor delivers up to 50%
greater energy efficiency
• R134a earth-friendly refrigerant
• Produces 68 dB, quieter than other
traditional air conditioners
• RoHS compliant
EASY INSTALLATION
➐
➌
➊
➋
SPECTRACOOL’s Key Advantages
UL Listed, saving customers time and
money by having agency approvals
Built-in flanges on back and 30 lb. (14 kg)
lighter for easy installation
R134a rotary
compressor for
greater energy
efficiency and
environmental
friendliness
➌
attractive design, adding value to the
➍ Clean
electronic system’s aesthetics
all-metal shroud for demanding
➎ Rugged
factory and outdoor environments
condenser➏ Dual
side impellers
• 30 pounds (14 kilograms) lighter than
the T50 Outdoor Air Conditioner
• UL Listed, saving customers time and
money by having agency approvals
• Built-in installation hooks on the back of
each unit
• Cut-out adapters for enclosures with
GENESIS® and T-Series Air Conditioners,
enabling users to easily transition to the
new models
CLEAN APPEARANCE
• Attractive industrial design
• Minimal use of visible fasteners
• RAL 7035 light gray powder-coat paint
in a semi-texture finish
• Other paint colors and textures available
VERSATILE COOLING
• Indoor and outdoor models
• 8000, 12,000 & 20,000 BTUs/Hr (2300,
3500 & 5900 Watts) of cooling with
other capacities available in 2010
• 115, 230 and 460 3-phase AC volt power
input with +/- 10% operating range
• Exterior and partially recessed 
mounting options
for performance
redundancy

Type 12/3R/4 Type 4X optional
metal filter and other
➐ Easy-to-access
components for fast service and less
system downtime
2
Subject to change without notice
US LISTED
RELIABLE PERFORMANCE
• Operating temperature range:
• -40 F/-40 C to 131 F/55 C outdoor
• 50 F/10 C to 131 F/55 C indoor
• UL Type 12/3R/4 rated and Telcordia 
GR-487 capable
• IP34 rated for incoming ambient air
• IP56 rated for air moving from the AC
into the enclosure
• Type 4X stainless steel option available
• All-metal shroud to better-withstand
rugged factory and outdoor
environments
• Dual condenser-side air movers for
performance redundancy
• Washable metal filter to keep coil clean
for maximum performance
• Made in an ISO 9001 certified facility
• Thoroughly tested during engineering
development to withstand vibration and
perform in virtually any environment
• Every unit functionally tested before
shipping
EASY TO SPECIFY
• Standard indoor air conditioner has:
• Condensate management heater strip
• Power-off relay for door switch
• Malfunction switch
• Standard outdoor air conditioner has:
• Telcordia GR-487 capability
• Corrosion-resistant components
• Malfunction switch
• Compressor heater
• Head pressure control
• 2000 watt enclosure heater
RESPONSIVE 
CUSTOMER SERVICE
• Popular models in-stock, ready for
immediate shipment
• Backed by a 1-year standard warranty
• Over 1,000 field repair technicians
worldwide
• Secure and easy-to-use online spare
parts store
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
CLIMAGUARD™
Outdoor Heat Exchanger
➊
➋
Lab- and field-tested to seal out harsh environments
EARTH-FRIENDLY
• Consumes less energy than traditional air conditioners
• RoHS compliant
VERSATILE COOLING
➎
➌
• Removes up to 3000 watts of enclosure heat
• Works with 24 VDC, 48 VDC, 115 VAC and 230 VAC power input
• Surface- and recess-mount options
• Up to 2000 watt heater selection on DC and AC volt models
HOW TO SELECT
➍
Stands tough against mother nature
➏
RUGGED DESIGN
• Engineered for extreme climate conditions
• -40 F/-40 C to 149 F/65 C operating temperature range
• UL Type 12/3R/4 rated and Telcordia GR-487 capable
• Powder-coated galvanized sheet metal shroud
• UL Type 4X stainless steel option available
• Corrosion–resistant aluminum core
RELIABLE PERFORMANCE
• Every core double-sealed for maximum weather protection
• Few moving parts
• Made in an ISO 9001 certified facility
• Every unit functionally tested
CLIMAGUARD’s Key Advantages
Listed, saving customers time and
➊ UL
money by having agency approvals
hooks to hang unit before fastening
➋ Built-in
to cabinet for easier installation
and AC-volt power input options to
➌ DCwork in a variety of systems without power
conversion
➍
Goes easy on human nature
QUIET
• Variable-speed blowers standard on DC-powered units for quieter operation
EASY TO USE
• UL Listed, saving customers time and money by having agency approvals
• Built-in installation hooks on the back of each unit
• Filterless capable for most operating environments
Doublesealed core
for maximum
protection
against extreme
weather
galvanized metal
➎ Powder-coated
construction with stainless steel option that
➏
stands up to harsh environments
DC-volt models operate at variable speeds,
producing less noise
RESPONSIVE CUSTOMER SERVICE
• Popular models in-stock, ready for immediate shipment
• Backed by a 1-year standard warranty
• Over 1,000 field repair technicians worldwide
• Secure and easy-to-use online spare parts store
Type 12/3R/4 Type 4X optional
Subject to change without notice
US LISTED
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
3
: 

New Product Overview

HOW TO SELECT
: 
Why Use Pentair Technical

Products
McLean Brand Cooling Technology
No company engineers and services cooling
solutions for vital electronics better than
Pentair Technical Products
With more than 30 years of experience producing everything from fan assemblies to
standard air conditioners and heat exchangers to engineered cooling applications for
one-of-a-kind systems, the Pentair Technical Products McLean brand has the people and
products to deliver the cool. The markets we serve include industrial automation, food
and beverage, telecommunications, petrochemical, transportation, data networking,
security and defense, and many others.
Pentair Technical Products
Awarded for Exceptional
Customer Service by Northrop
Grumman, A Premier U.S.
Defense Contractor
Pentair Technical Products understands your need for performance and does whatever it
takes to ensure that when you make a promise to a customer, you can keep it.
Pentair Technical Products received a 2008
Customer Service Award from Northrop
Grumman for exceptional performance on
critical Homeland Defense contracts. The
Northrop Grumman award recognized
select vendors who play a critical role in
helping the company successfully fulfill its
US government and other major contracts.
Northrop Grumman selected the McLean
brand to provide the cooling solution for
the Biohazard Detection System (BDS)
developed for the US Postal Service. Part of
the project’s challenge included managing
the heat load generated from the sensitive
electronics utilized in the system and from
varying environmental conditions.
“The Pentair Technical Products team
stepped up to the challenge with the
development of an air conditioner that had
the right level of cooling, service life and
other key features. They also provided the
post-deployment service support that was
needed,” said Ann Schofield, BDS programs
director at Northrop Grumman. “Our entire
supplier experience with Pentair Technical
Products proved to be exceptional, leading
us to select them for the service award.”
The Northrop Grumman award affirmed
the customer-focused culture at Pentair
Technical Products. Some companies put
customer service in their mission statements;
Pentair Technical Products actually lives by it. 4
Subject to change without notice
PRODUCT SELECTION
Indoors or out, McLean air conditioners, heat exchangers, air movers and controls get the
job done.
ENGINEERED COOLING
SOLUTIONS
An experienced staff with advanced
software, rapid prototyping and inhouse test facilities delivers engineered
cooling solutions quickly and to your
exact specifications.
TECHNICAL EXPERTISE
AND SUPPORT
With over 30 years of experience across
dozens of industries, our engineers are
able to assist your project design every
step of the way. We also put that same
cooling know-how into the standard
platform solutions that we develop for
the broader market.
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Speak with McLean customers, and you’ll
discover a strong market reputation for
product reliability. We are ISO 9001:2008
certified. Every unit is also functionally
tested before shipping.
EXPERIENCED SALES STAFF
Years of cooling systems expertise,
engineering knowledge and responsive
problem solving help our sales staff
“listen, learn, develop and deliver.”
Cool Customer Successes
Thomson and McLean Are
Shaken, But Not Stirred
Thomson Broadcasting is the world leader
in digital video technologies. That’s why top
media, entertainment and communications
companies turn to Thomson to get the right
images to the right place at the right time –
over time.
And that’s why Thomson turns to the
McLean brand to help keep its customers’
broadcast systems up and running 24/7. ONLINE PARTS ORDERING
FISCALLY STRONG
An easy-to-navigate online parts store
provides fast, secure replacement part
ordering 24/7.
The Pentair Technical Products McLean
brand is owned by Pentair, a $2.7 billion
diversified, publically held global operating
company. We handle single-unit in-stock
orders to $5 million+ global projects.
“We recently tested a new UHF base station
for one of our clients,” said Don Wike, Chief
Design Engineer. “We put our system,
including a McLean outdoor air conditioner,
through a pretty rigorous Telcordia GR-487
test protocol. We shook the UHF system,
dropped it from over 18 inches, and
simulated years of cold winters and hot
summers in a cycle chamber. After all this,
the McLean unit still performed beautifully.”
Don added, “Our customers count on
Thomson to design a rugged digital media
system. And we count on McLean to keep
the electronics cool. We had over 8,000
watts of heat to dissipate in the new UHF
base station system. The McLean 3-ton A/C
unit proved it can handle the load. Pentair
Technical Products also allowed us to use
their thermal cycle test chamber, saving us
R&D costs.” GLOBAL REACH
McLean’s growing worldwide network
of sales, distribution and manufacturing
delivers quality service for those who
need global infrastructure.
Subject to change without notice
SUPERIOR SERVICE AND REPAIR
Over 1,000 certified repair technicians
provide 24-hour emergency service
worldwide.
For electronics cooling that performs under
extreme conditions, take a serious look at
McLean. More cool customer stories are
available at McLeanCoolingTech.com
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
5
HOW TO SELECT
PRODUCT RELIABILITY
: 
Why Use Pentair Technical Products  
McLean Brand Cooling Technology
HOW TO SELECT
McLean Cooling Technology: How To Select A Protective Cooling Solution
Protective Cooling Solution Overview
McLean Cooling Technology
How To Select A Protective Cooling Solution
Protective Cooling Solution Overview
Why cool electronics in the first place?
Keeping your electronics cool is essential to extending their life and keeping your business running.
Heat Ruins Electronics
The life expectancy of electronics is cut in half every 10 C / 18 F
they operate above room temperature. Operating electronics above
certain temperatures can void manufacturers’ warranties, making
proper cooling essential. Cooling vital electronics increases service
life and reduces capital expenses over the long-term.
Electronics Life Expectancy with
Every 10° C Rise over Room Temperature
Sources of Heat
Damaging heat can come from a variety of sources. Inside the
cabinet, heat can stem from:
•• AC power supplies
•• Controllers, drives and servos
•• Transformers and rectifiers
•• Processors and server racks
•• Radio equipment
•• And other electronic components
Trend Toward More Damaging Heat
For the foreseeable future, the trend is toward increasing levels of
heat in electronics, not less. The reason is that the market’s thirst for
more information processing capacity and speed continues to grow.
This trend is known as “Moore’s Law.”
Heat also comes from outside the enclosure through sources such as:
•• Solar heat gain
•• Welding processes
•• Paint oven
•• Blast furnace
•• Foundry equipment
Moore’s Law
Named after the founder of Intel
The use of more powerful data-processing electroics generates
extra heat with virtually every new system that is designed. There is
no guarantee that an application that did not require much, if any,
cooling in the past will not need any in the future. Odds are the new
system has more functionality and consequently will likely require
some form of cooling.
What are the consequences of damaging heat?
Heat build-up can adversely affect industrial control and sensitive
electronic systems as follows:
•• De-rated drive performance
•• I/C-based devices experience intermittent fluctuations
•• MTBF decreases exponentially
•• Catastrophic failure
The costs when a factory line or electronic system fails can include:
•• Productivity losses
•• Component replacement costs
•• Late shipments
•• Customer dissatisfaction
•• Lost revenue
•• Cell phone tower outage
•• Breach in homeland security
Direct costs to a business can be as much as $50,000 per hour of
system downtime.
6
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Options for Cooling Electronics
Conductive Cooling
Options for Cooling Electronics
This is a passive way to cool electronics. It simply allows the heat to
radiate through the cabinet walls.
Conductive cooling works well with electronics systems that have
small heat loads (<50 Watts) and cool air around the enclosure
(<78 F/25 C).
Fresh Air Cooling
This is an active way to manage heat in electronics applications. This
type of cooling ventilates fresh air through the cabinet, exhausting
heat away from the hot components.
Fresh air cooling may be used when the electronics system is
deployed in a relatively clean and cool environment such as an office
building, data networking center or light-duty factory. Options for
cooling electronic enclosures with fresh air include filter fans, fan
trays, motorized impellers and packaged blowers.
Fresh air cooling is known as an “open-loop system” because no
significant seal is maintained to protect electronic components from
harmful elements such as dirt, water, metal filings and corrosive
fumes.
Protective Cooling
This is also another active way to cool electrical components. This
type of thermal management maintains the seal of the enclosure—
using an air conditioner or heat exchanger as examples—to remove
heat from inside the electronics cabinet.
Protective cooling is generally required when (1) the electronics
application is operating in high temperatures, typically over
95 F/35 C, (2) deployed in a harsh environment such as an outdoor
telecom base station, wastewater treatment plant, metal working
operation, oil rig platform, paper mill, foundry and/or (3) generating
a high heat load from its own components, usually more than 500
Watts.
Options for protective cooling include air conditioners, air-to-air heat
exchangers, air-to-water heat exchangers, thermo-electric coolers
and vortex coolers.
Protective cooling is known as a “closed-loop system” because the
seal of the electrical cabinet is maintained, allowing no elements
which can damage the electronics inside the enclosure.
Air Conditioner
Subject to change without notice
Heat Exchanger
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
7
HOW TO SELECT
If heat is an issue, one option within this type of cooling is to increase
cabinet size to create more surface area to speed the transfer of
heat. However, growing cabinet size is often not a practical solution
because of space limitations and the greater heat loads associated
with today’s high-power electronics.
McLean Cooling Technology: How To Select A Protective Cooling Solution
HOW TO SELECT
McLean Cooling Technology: How To Select A Protective Cooling Solution
Levels of Electronic Enclosure Protection
Levels of Electronic Enclosure Protection
Protection Levels
NEMA, UL and CSA Ratings Enclosure Type Descriptions for Non-Hazardous Locations
Indoor
Type
Type 1
Indoor
Type 12
Indoor
Type 12K
Enclosures with knockouts are intended
for indoor use primarily to provide a
degree of protection against dust, falling
dirt and dripping noncorrosive liquids.
Indoor
Type 13
Enclosures are intended for indoor
use primarily to provide a degree of
protection against dust, spraying of water,
oil and noncorrosive coolant.
Outdoor
Type 3
Outdoor
Outdoor
Outdoor
Outdoor
Outdoor
NEMA
Enclosures are intended for indoor
use primarily to provide a degree of
protection against contact with the
enclosed equipment or locations where
unusual service conditions do not exist.
Enclosures are intended for indoor use
primarily to provide a degree of
protection against dust, falling dirt and
dripping noncorrosive liquids.
Enclosures are intended for outdoor
use primarily to provide a degree of
protection against windblown dust, rain
and sleet; undamaged by the
formation of ice on the enclosure.
Type 3R Enclosures are intended for outdoor
use primarily to provide a degree of
protection against falling rain and sleet;
undamaged by the formation
of ice on the enclosure.
Type 3RX Enclosures are intended for outdoor
use primarily to provide a degree of
protection against corrosion, falling
rain and sleet; undamaged by the
formation of ice on the enclosure.
Type 4
Enclosures are intended for indoor or
outdoor use primarily to provide a
degree of protection against windblown
dust and rain, splashing water and hose
directed water; undamaged by the
formation of ice on the enclosure.
Type 4X Enclosures are intended for indoor
or outdoor use primarily to provide a
degree of protection against corrosion,
windblown dust and rain, splashing water
and hose-directed water; undamaged by
the formation of ice on the enclosure.
Type 6
Enclosures are intended for use indoors or
outdoors where occasional submersion is
encountered; limited depth; undamaged
by the formation of ice on the enclosure.
UL
Indoor use primarily to
provide protection against
contact with the enclosed
equipment and against
a limited amount of falling dirt.
Indoor use to provide a degree
of protection against dust, dirt, fiber
flyings, dripping water and external
condensation of noncorrosive liquids.
CSA
General purpose enclosure.
Protects against accidental
contact with live parts.
Either indoor or outdoor use to
provide a degree of protection
against falling rain, splashing
water and hose-directed water;
undamaged by the formation
of ice on the enclosure.
Either indoor or outdoor use to
provide a degree of protection
against falling rain, splashing
water and hose-directed water;
undamaged by the formation of ice
on the enclosure; resists corrosion.
Indoor or outdoor use to provide a
degree of protection against entry of
water during temporary submersion
at a limited depth; undamaged
by the external formation
of ice on the enclosure.
Indoor or outdoor use; provides a
degree of protection against
rain, snow, windblown dust,
splashing and hose-directed
water; undamaged by the external
formation of ice on the enclosure.
Indoor or outdoor use; provides a
degree of protection against rain,
snow, windblown dust, splashing and
hose-directed water; undamaged by
the external formation of ice on the
enclosure; resists corrosion.
Indoor or outdoor use; provides a
degree of protection against the
entry of water during temporary
submersion at a limited depth.
Undamaged by the external
formation of ice on the
enclosure; resists corrosion.
Indoor use; provides a degree of
protection against circulating dust,
lint, fibers and flyings; dripping and
light splashing of non-corrosive
liquids; not provided with knockouts.
Indoor use to provide a degree of
Indoor use; provides a degree of
protection against dust, dirt, fiber
protection against circulating
flyings, dripping water and external
dust, lint, fibers and flyings; dripping
condensation of noncorrosive liquids. and light splashing of noncorrosive
liquids; not provided with knockouts.
Indoor use to provide a degree
Indoor use; provides a degree of
of protection against lint, dust
protection against circulating dust,
seepage, external condensation
lint, fibers and flyings; seepage and
and spraying of water, oil and
spraying of non-corrosive liquids,
noncorrosive liquids.
including oils and coolants.
Outdoor use to provide a
Indoor or outdoor use; provides a
degree of protection against
degree of protection against
windblown dust and windblown
rain, snow and windblown dust;
rain; undamaged by the
undamaged by the external
formation of ice on the enclosure.
formation of ice on the enclosure.
Outdoor use to provide a
Indoor or outdoor use; provides
degree of protection against
a degree of protection against
falling rain; undamaged by the
rain and snow; undamaged by the
formation of ice on the enclosure.
external formation of ice
on the enclosure.
Not specifically defined.
Not specifically defined.
•• T his material is reproduced with permission from NEMA. The preceding descriptions, however, are not intended to be complete
representations of National Electrical Manufacturers Association standards for enclosures nor those of the Electrical and Electronic
Manufacturers Association of Canada.
•• This material is reproduced with permission from Underwriters Laboratories Inc. Enclosures for Electrical Equipment, UL 50, 50E and
Industrial Control Panels, UL 508A.
•• This material is reproduced with permission from the Canadian Standards Association.
•• Underwriters Laboratories Inc. (UL) shall not be responsible for the use of or reliance upon a UL Standard by anyone. UL shall not incur
any obligation or liability for damages, including consequential damages, arising out of or in connection with the use, interpretation of,
or reliance upon a UL Standard.
•• Some enclosures may have multiple ratings. For instance: 4, 12—Outdoor use; able to be used indoors with modifications; 4X, 3RX—
Outdoor use; able to be used indoors with modifications; 4, 9—Can be used in both hazardous and non-hazardous locations
8
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
IP Rating Descriptions Example Rating
If 1st IP number is...
2
(protection against solid objects)
and the 2nd ip number is...
3
(protection against liquids)
Then the IP rating is
IP23
An enclosure with this designation provides protection against touch with a
finger, penetration of solid objects greater than 12mm, and spraying water.
First Numeral (Solid Objects and Dust)
Protection of Persons
No Protection
Protected against contact with large areas of the body (back of hand)
Protected against contact with fingers
Protected against tools and wires over 2.5 mm in diameter
Protected against tools and wires over 1 mm in diameter
Protected against tools and wires over 1 mm in diameter
Protected against tools and wires over 1 mm in diameter
HOW TO SELECT
IP
0
1
2
3
4
5
6
Protection of Equipment
No Protection
Protected against objects over 50 mm in diameter
Protected against solid objects over 12 mm in diameter
Protected against solid objects over 2.5 mm in diameter
Protected against solid objects over 1 mm in diameter
Protected against dust (limited ingress, no harmful deposit)
Totally protected against dust
Second Numeral (Liquid)
IP
0
1
2
3
4
5
6
7
8
Protection of Equipment
No Protection
Protected against vertically falling drops of water, e.g. condensation
Protected against direct sprays of water up to 15 degrees from vertical
Protected against sprays to 60 degrees from vertical
Protected against water sprayed from all directions (limited ingress permitted)
Protected against low-pressure jets of water from all directions (limited ingress permitted)
Protected against strong jets of water
Protected against the effects of immersion between 15 cm and 1 m
Protected against long periods of immersion under pressure
SCCR Requirements per UL (Condensed version)
Article 409 of the 2008 National Electric Code (NFPA 70) requires industrial control panels to be marked with a short circuit current rating. As
specified in the National Electric Code, UL508A-2001 Supplement SB, the Standard of Safety for Industrial Control Equipment, provides an
accepted method for determining the short-circuit current rating of the control panel.
The SCCR rating for our air conditioners and heat exchangers has a default value of 5 kA.
You may use a 5 or 10 kVA isolation transformer between the customer’s panel and our air conditioner and not have an effect on the
customer’s 65 kA rating.
You may use a fuse or circuit breaker with a 5 kA short circuit rating on the line side of the ACU and its branch circuit protective device and
not have an effect on the customer’s 65 kA rating.
The current limiting fuse or circuit breaker used on the line side of the branch circuit protection for the ACU must have a SCCR => that of the
panel rating. Additionally for a current limiting fuse the customer would need to verify using table SB4.2 of UL 508A, that the let through
current (Ip * 10^3) of the fuse is <= 5KA. If a circuit breaker is used as feeder protection, it must be marked Current Limiting type from the
manufacturer, and the panel builder would need to verify based on the manufacturers published curves that it will let through <= 5kA.
Examples of these curves are included in UL 508A supplement SB.
You can run separate circuits for the panel and the air conditioner as long as each is labeled with their individual SCCR ratings.
(5 kA and 65 kA)
If the customer does not implement one of the options above, then the resulting SCCR rating would be the 5 kA rating of the ACU, if that is
the lowest rated component in the panel.
Testing represents another option; however, if the customer does not implement these options, then the resulting short circuit rating of the
panel is based on the lowest short circuit current rating of all power circuit components installed in the panel.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
9
McLean Cooling Technology: How To Select A Protective Cooling Solution
Levels of Electronic Enclosure Protection
HOW TO SELECT
McLean Cooling Technology: How To Select A Protective Cooling Solution
Selecting the Right Cooling Solution
Selecting the Right Cooling Solution
Cooling Solution
Since heat dissipation is often not a solution, we will limit our choices to protective vs. fresh air cooling.
Use the environmental and electronic system criteria in the table below to determine whether protective or fresh air cooling meets the needs
of your application.
Protective vs. Fresh Air Cooling
Specifying protective cooling that keeps your electronics components sealed from the outside environment versus using fresh
air cooling to remove damaging heat depends on the following profile of your system application (check one side or the
other for each of the six choices):
PROTECTIVE
Dirty / Wet / Metal Filings /
Outdoors / Corrosive Fumes
Hot
(typically over 95 F / 35 C)
Below to Somewhat Above
Ambient Temperature
High Relative Humidity
Narrow / Precise
Moderate to High
(typically over 3000 Watts)
FRESH
SYSTEM OPERATING
ENVIRONMENT
TEMPERATURE OUTSIDE
OF THE ENCLOSURE
TEMPERATURE RATING
OF THE ELECTRONICS
HUMIDITY OUTSIDE
OF THE ENCLOSURE
Clean Air / Some Dust /
Dripping Water
Moderate to Low
(typically under 95 F / 35 C)
Somewhat to Well-Above
Ambient Temperature
Moderate to Low
TEMPERATURE RANGE
FOR THE ELECTRONICS
Wide
SYSTEM POWER DRAW /
HEAT LOAD
Moderate to Low
(typically under 3000 Watts)
If most of your assessments were on the Protective side, then an air conditioner or heat exchanger found in this catalog is likely
the right cooling solution for your electronics system. However, if most of your conclusions fell on the fresh air side, then a
filter fan, fan tray, motorized impeller or blower is probably the correct cooling solution for your application. McLean in-stock
and engineered air movers can be found in our Fresh Air Cooling Catalog for open-loop electronic systems.
10
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Cooling Solution Choices
Assuming that protective cooling is needed for the application, there
are two basic choices—air conditioners or heat exchangers.
Subject to change without notice
A heat exchanger can be used to transfer heat from inside the
enclosure to the outside atmosphere when:
•• The electronic components can operate at a temperature above
the ambient air.
•• Humidity is not a factor.
•• A low to moderate heat load is being produced by the electronic
system.
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
11
HOW TO SELECT
An air conditioner should be specified when:
•• The temperature inside the enclosure must be maintained at or
below the ambient temperature.
•• Humidity must be removed.
•• A moderate to high heat load is being produced by the electronic
system.
McLean Cooling Technology: How To Select A Protective Cooling Solution
Selecting the Right Cooling Solution
HOW TO SELECT
McLean Cooling Technology: How To Select A Protective Cooling Solution
How to Select the Right Cooling Capacity Air Conditioner
How to Select the Right Cooling Capacity Air Conditioner
Air Conditioner Cooling Capacity Overview
The cooling capacity of an air conditioner needs to match or exceed the amount of total heat generated by the electronic system which is
known as “heat load.”
Total heat load comes from two sources:
(a) the electronic components themselves which is called “internal heat load” and (b) the ambient heat outside the enclosure which is known
as the “heat transfer load.” Most engineers and cooling suppliers determine internal heat load. However, the impact from the heat transfer
load is easily overlooked. Heat transfer load can significantly add to the total heat load of the system, especially if the outside air temperature
is high and/or the enclosure is located in the sun.
Thus, the total heat load to be removed from the electrical enclosure by the air conditioner is the sum of the internal heat load and the
heat transfer load.
TOTAL HEAT LOAD = INTERNAL HEAT LOAD + HEAT TRANSFER LOAD
How to Determine Internal Heat Load
Method 3. Incoming – Outgoing Power
There are several methods to determine internal heat load,
depending on data availability.
A third approach is to estimate the power going into the enclosure
and the power coming out of it. The difference becomes the
estimated amount of internal heat load. The amps and volts of each
electrical line going in are multiplied to determine watts, then they’re
added together. The same is done for the electrical line(s) coming out
of the application. The outgoing watts are subsequently subtracted
from the incoming watts.
Method 1. Heat Load Data from Each Electronics Component
Manufacturer
INTERNAL HEAT LOAD =
INCOMING POWER (Watts) – OUTGOING POWER (Watts)
One way to estimate internal load is gather heat load data from the
manufacturers of the electronics components inside the cabinet.
They may know the amount of heat their equipment is generating.
If more than one control or other electronics components are inside
the enclosure, it will be necessary to add together the multiple
estimates of heat load to determine total internal heat load.
Example—
The internal heat load stems from the amount of waste heat
generated inside the enclosure by the electronic components and is
expressed in terms of watts.
Method 2. Component Power – Component Efficiency
A second method is to establish the watts of power used by each
electronic component. Watts of power is derived by multiplying the
amp draw of each device with its voltage. Then one subtracts the
efficiency of each component from its estimated power use, adding
up the outcomes for total internal heat load.
INTERNAL HEAT LOAD =
COMPONENT POWER (Watts) - COMPONENT EFFICIENCY
(for each electrical device)
An electronic system uses two components that draw 115 VAC at
15 amps. Each has a rated efficiency of 90%. Put another way, 10%
of each device is inefficient. Unused portions of power become
generated heat. Thus the estimated internal heat load is:
12
Subject to change without notice
Incoming Power = (230 x 11) + (230 x 6) + (230 x 4) = 4830 Watts
Outgoing Power = 115 x 9 = 1035 Watts
Total Heat Load = 4830 – 1035 = 3795 Watts
Method 4. Automated Equipment Horsepower
This fourth method applies only to industrial automation equipment
that operates with horsepower such as variable frequency drives
(VFDs). 1 horsepower = 745.6 watts. Thus, the internal heat load from
a 3-horsepower VFD is 2237 watts, less its efficiency which is typically
93% - 95%.
Example—
Example—
Device Power = 115 x 15 = 1725 Watts
Total Power = 2 x 1725 = 3450
Less Efficiency = 3450 x (1 - .90)
Total Heat Load = 345 Watts
An enclosure has three input lines of 230 VAC at 11, 6 and 4 amps. It
has one output control line of 115 VAC at 9 amps.
A cabinet has three 5-Hp VFDs with 95% efficiency.
VFD Watts = 5 Hp x 745.6 x 3 = 11184
Adjusted Watts = 11184 x (1 - .95) = 559
Total Heat Load = 559 x 1.25 = 699 Watts
NOTE: 1.25 is an assumed “safety” margin for other minor heatproducing components.
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
How to Determine Heat Transfer Load Overview
Heat transfer load is the ambient heat outside the enclosure conducting itself through the cabinet walls toward the electronics because heat
energy travels from the hottest to coldest location.
When an air conditioner cools the enclosure temperature lower than the ambient air outside, additional heat load is drawn inside the cabinet
which the air conditioner needs to remove. The higher the ambient temperature and/or the presence of solar heat gain (the “greenhouse
effect”) on the enclosure, the more cooling capacity is required.
There are two methods for determining heat transfer load—the simple chart method and the equation method.
Simple Chart Method
This method is reasonably accurate for most indoor industrial
systems where there is no unusual air movement and insulation is
not typically used inside the enclosure. The process also provides
a ballpark result for outside plant and telecommunications
applications, taking into account solar heat gain. However, it does
not incorporate the impact of wind or cabinet insulation. If either is
desired, then the equation method is more precise.
Here are the steps:
a. Determine ΔT in °F or °C
b. Find the Heat Transfer per sq. ft. or meter on the chart
below, using ΔT and the proper cabinet material curve
c. Multiply the heat transfer per sq. ft. or meter by the total
surface area of the enclosure that will conduct heat.
(Remember to exclude surfaces such as a side mounted
to a wall).
Example —
A painted steel cabinet has 80 sq. ft. of surface area and will be
located in a maximum ambient temperature of 95 F. The rated
temperature of the electronics is 75 F.
ΔT = 95 - 75 = 20 F
Heat Transfer = 4 Watts/sq. ft. (from chart)
Total Heat Transfer Load = 80 x 4 = 320 Watts
The estimate for heat transfer load ends here, unless the electronic
system will be deployed outdoors. Then solar heat gain needs to be
added to the total heat transfer load calculated above. Solar heat gain
is determined much the same way as heat transfer per sq. ft. or meter,
using a similar chart.
SURFACE AREA (Sq. Ft.) = [2AB (in.) + 2BC (in.) + 2AC (in.)] ÷ 144
SURFACE AREA (Sq. Meters) =
[2AB (mm) + 2BC (mm) + 2AC (mm)] ÷ 1000000
Total Heat Transfer Load =
Heat Transfer per Sq. Ft. or Meter x Cabinet Surface Area
Example — The painted cabinet above is in ANSI 61 gray. Thus, 7
Watts/sq. ft. needs to be added to the heat transfer load which is 560
Watts (7 x 80 Sq. Ft.). Total heat transfer load consequently becomes
720 Watts.
Note: The result does not include insulation which can significantly
reduce heat transfer load.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
13
HOW TO SELECT
Determining heat transfer load requires that you know the total surface area of the cabinet, less any non-conductive surface area such as
the enclosure side mounted to a wall. It also requires that you determine ΔT, which is the difference between maximum ambient temperature
and the maximum temperature rating of the electronics components.
McLean Cooling Technology: How To Select A Protective Cooling Solution
How to Select the Right Cooling Capacity Air Conditioner
HOW TO SELECT
McLean Cooling Technology: How To Select A Protective Cooling Solution
How to Select the Right Cooling Capacity Air Conditioner
Equation Method
Heat transfer load may also be determined by equation. This method
should be used when at least one of the following criteria are found
in the electronic system:
a. Moderate to high airflow within the cabinet
b. Outdoor applications that involve breezes or gusty winds
c. Insulation used within the cabinet to offset the impact of
solar heat gain
The governing equation for Heat Transfer Load is as follows:
English System (°F, inches and feet) —
q = (Too - Tii) ÷ [(1/hoo) + (1/hii) + R]
Hii = Convective heat transfer coefficient inside the cabinet
Still air: h = 1.6
Moderate air movement: h = 2.0
Blower (approx. 8 ft./sec.): h = 3.0
R = Value of insulation lining the interior of the enclosure walls
No insulation: R = 0.0
1/2 in. or 12 mm: R = 2.0
1 in. or 25 mm: R = 4.0
1-1/2 in. or 38 mm: R = 6.0
2 in. or 51 mm: R = 8.0
q = (125 - 75) ÷ [(1/6) + (1/2) + 4]
q = (50) ÷ (.16 + .5 + 4.0)
q = 50 ÷ 4.66
q = 10.7 BTU/hr./sq. ft.
Metric System (°C, millimeters and meters) —
(q = (Too - Tii) ÷ [(1/hoo) + (1/hii) + R] x 5.67
Definition of Variables—
q = Heat transfer load per unit of surface area
Too = Maximum ambient temperature outside the enclosure
Tii = Maximum rated temperature of the electronics components
hoo = Convective heat transfer coefficient outside the cabinet
Still air: h = 1.6
Relatively calm day: h = 2.5
Windy day (approx. 15 mph): h = 6.0
Total Heat Transfer Load
10.7 x 72 = 770 BTU/hr. or 770 ÷ 3.413 = 226 Watts
Since the cabinet is outdoors, and assuming it is painted ANSI 61 gray
and located in the sun, extra solar load needs to be added to the
outcome above which is 504 Watts (7 Watts per sq. ft. x 72 sq. ft.).
Total Heat Transfer Load with Extra from Solar Heat Gain
226 + 504 = 730 Watts
How to Determine Total Heat Load
Total heat load to be removed from the electrical enclosure by the air conditioner is the sum of internal heat load plus heat transfer load.
TOTAL HEAT LOAD (C) = INTERNAL HEAT LOAD (A) + HEAT TRANSFER LOAD (B)
Thus, one adds together the result from Part A in the methodology with the outcome from Part B.
Example—
The internal heat load from one of the examples above was 3795 Watts. The heat transfer load from the other example above was 730 Watts.
Consequently, total heat load is 3795 + 730 = 4525 Watts.
To convert Watts into BTU/hr. to determine air conditioner capacity in the English system, multiply by 3.413.
4525 Watts is thereby 15444 BTU/hr.
Power input, protection level and dimensions of the air conditioner also need to fit system requirements.
Caution! Do not simply match the nominal cooling capacity of the air conditioner model with the total heat load result above. Be sure to
know the maximum ambient temperature outside the enclosure as well as the rated temperature of the electronic components. Apply these
temperatures to the performance curves provided by the cooling manufacturer to select an appropriately sized air conditioner. Failure to do
so may under-size your air conditioner as much as 20% - 25%, thereby under-cooling the electronics and making the application vulnerable
to potential over-heating issues.
14
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
How to Select the Right Cooling Capacity Heat Exchanger
Heat Exchanger Cooling Capacity Overview
Cooling with an air-to-air heat exchanger assumes that the electronic components in your system are able to operate above the ambient
temperature outside the enclosure. If this is not the case, then an air conditioner must be used.
Selecting a heat exchanger is similar to specifying an air conditioner in that the cooling capacity of the unit must remove the internal heat
load from the electrical enclosure.
HOW TO SELECT
However, since the conductive cooling nature of the cabinet itself removes some of the heat from the system, heat transfer should be
deducted from internal heat load (versus added in the case of air conditioners).
Because the cooling capacity of heat exchangers is expressed in terms of Watts/°F or Watts/°C, an extra step is necessary to convert net
heat load into a result used to select the appropriate heat exchanger. This step is simply dividing the net heat load by the ΔT which is the
difference between the maximum ambient temperature outside the enclosure and the maximum temperature rating of the electronic
components.
HEAT EXCHANGER CAPACITY (C) = [INTERNAL HEAT LOAD (A) – HEAT TRANSFER (B)] / ΔT
How to Determine Internal Heat Load
Internal heat load stems from the amount of waste heat generated inside the enclosure by the electronic components and is expressed in
terms of Watts.
To determine internal heat load, follow one of the four options outlined in the air conditioner “How to Determine Internal Heat Load” section
on page 12.
How to Determine Heat Transfer
In the case of air-to-air heat exchangers, heat transfer is actually cabinet heat loss because the heat inside the enclosure is conducting itself
through the cabinet walls toward the cooler temperature outside the enclosure. That is why heat transfer is deducted from internal heat load
to arrive at total net heat load.
Determining heat transfer requires that you know the total surface area of the cabinet, less any non-conductive surface area such as the
enclosure side mounted to a wall. It also requires that you determine ΔT which is the difference between maximum ambient temperature
and the maximum temperature rating of the electronic components.
There are two methods to determine heat transfer—the simple chart method and the equation method. The simple chart method may be
used for nearly all indoor heat exchanger applications. The equation method needs to be applied when air movement outside or inside the
electrical enclosure is high, or for outdoor applications.
Here are the steps for the simple chart method:
d. Determine ΔT in °F or °C.
e. Find the heat transfer per sq. ft. or meter from the Heat Transfer graph on page 13, using ΔT and the proper cabinet material curve.
f. Multiply the heat transfer per sq. ft. or meter by the total surface area of the enclosure that will conduct heat. (Remember to
exclude surfaces such as a side mounted to a wall.)
SURFACE AREA (Sq. Ft.) = [2AB (in.) + 2BC (in.) + 2AC (in.)] ÷ 144
SURFACE AREA (Sq. Meters) = [2AB (mm) + 2BC (mm) + 2AC (mm)] ÷ 1,000,000
Heat Transfer (Cabinet Heat Loss) = Heat Transfer per Sq. Ft. or Meter x Enclosure Surface Area
The estimate for heat transfer ends here, unless the electronic system will be deployed outdoors, or airflow inside or outside the enclosure is
high. Then the equation method needs to be used to determine heat transfer (cabinet heat loss).
For the equation method, follow the steps on page 13 in the air conditioner selection section. The result will be a negative number; the
negative sign should be ignored when deducting heat transfer from internal heat load.
Caution! If the result of the equation method is a positive number, this means you want the electronics temperature inside the cabinet to be
lower than the temperature outside the enclosure. In this case, an air conditioner should be specified for the electronics system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
15
McLean Cooling Technology: How To Select A Protective Cooling Solution
How to Select the Right Cooling Capacity Heat Exchanger
HOW TO SELECT
McLean Cooling Technology: How To Select A Protective Cooling Solution
How to Select the Right Cooling Capacity Heat Exchanger
How to Determine Heat Exchanger Capacity
Air-to-air heat exchanger capacities are not provided in terms of
Watts or BTUs/hr. of cooling like air conditioners. Instead, they are
expressed in terms of Watts/°F or Watts/°C. Thus, the final step in
determining heat exchanger capacity is to simply divide total net
heat load by ΔT. Then one selects the heat exchanger with the same
or higher Watts/°F or Watts/°C as the outcome of this process.
—Indoor Industrial Example—
An electronic system uses two components that draw 230 VAC at
7.5 amps. Each has a rated efficiency of 90%. They are protected in a
painted steel cabinet that is 60 in. (1524 mm) tall, 36 in. (914 mm) wide
and 18 in. (457 mm) deep. The system will be located in a maximum
ambient temperature of 80 F (27 C). The rated temperature of the
electronics is 95 F (35 C).
HEAT EXCHANGER CAPACITY (C) =
[INTERNAL HEAT LOAD (A) – HEAT TRANSFER (B)] ÷ ΔT
Internal heat load (A) may be determined using the “Component
Power – Component Efficiency” method on page 12, given the
available information. In this example, the estimated heat load is as
follows:
Device Power = 230 x 7.5 = 1725 Watts
Total Power = 2 x 1725 = 3450
Less Efficiency = 3450 x (1 - .90)
Internal Heat Load = 345 Watts
Heat transfer (B) is derived using the simple chart method, since
this is an indoor industrial application. Both cabinet surface area
and ΔT are needed to determine heat transfer. Cabinet surface area
is 54 sq. ft. or 5.02 sq. meters (for surface area formula on page 13). ΔT
is 15 F (8 C)—the difference between ambient temperature and the
rated temperature of the electronics.
Heat Transfer (Cabinet Heat Loss) =
Heat Transfer per Sq. Ft. or Meter x Enclosure Surface Area
Using the painted steel curve on the Heat Transfer chart on page 13,
heat transfer per sq. ft. or meter is 3 Watts/sq. ft. or 32.5 Watts/sq.
meter.
Heat Transfer: 3 Watts/Sq. Ft. x 54 Sq. Ft. = 162 Watts
—Outdoor Example—
A telecom system draws a total of 5,000 Watts; its efficiency is 85%.
It is protected in a painted steel cabinet that is 72 sq. ft. (6.69 sq.
meters) and painted in an RAL 7035 light gray color. The enclosure
walls are lined inside with 1 in. (25 mm) of insulation. The application
will be deployed in a maximum ambient outdoor temperature of
104 F (40 C) with occasional winds reaching 15+ mph. The rated
temperature of the electronics is 114 F (46 C). Air circulation inside the
cabinet is moderate.
HEAT EXCHANGER CAPACITY (C) =
[INTERNAL HEAT LOAD (A) – HEAT TRANSFER (B)] ÷ ΔT
Internal heat load (A) is determined using the “Component Power
– Component Efficiency” method on page 12. In this example, the
estimated heat load is as follows:
Total System Power = 5000 Watts
Less Efficiency = 5000 x (1 - .85)
Internal Heat Load = 750 Watts
Heat transfer (B) is derived using the equation method, since this
is an outdoor application. For brevity, we will assume the English
system (°F, inches and feet).
q = (Too - Tii) ÷ [(1/hoo) + (1/hii) + R]
“q” is heat transfer per surface area. For an explanation of the other
variables on page 14.
q = (104 - 114) ÷ [(1/6) + (1/2) + 4]
q = -2.14 Watts per sq. ft.
Total Heat Transfer: 2.14 x 72 Sq. Ft. = 154 Watt
(negative sign is ignored)
ΔT is 10 F — the difference between ambient temperature and the
rated temperature of the electronics.
HEAT EXCHANGER CAPACITY (C) =
[750 WATTS (A) – 154 WATTS (B)] ÷ 10 F
Now that we know internal heat load, heat transfer and ΔT, we can
determine heat exchanger capacity as follows:
HEAT EXCHANGER CAPACITY (C) = 60 Watts/°F
HEAT EXCHANGER CAPACITY (C) =
[345 WATTS (A) – 162 WATTS (B)] ÷ 15 F (or 8 C)
As in the Indoor Industrial example, the above result is minimum
heat exchanger capacity. If no heat exchanger model is similar to the
result, choose the next largest size to ensure adequate electronics
cooling.
HEAT EXCHANGER CAPACITY (C) = 12 Watts/°F or 22 Watts/°C
The result is minimum heat exchanger capacity. If no heat exchanger
model is similar to the result, choose the next largest size to ensure
adequate electronics cooling.
Power input, protection level and dimensions of the heat exchanger
also need to fit the system.
Power input, protection level and dimensions of the heat exchanger
also need to fit the system.
16
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Notes
HOW TO SELECT
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
17
McLean Cooling Technology: How To Select A Protective Cooling Solution
How to Select the Right Cooling Capacity Heat Exchanger


McLean Cooling Technology: Air Conditioners: 
Product Overview

SPECTRACOOL™
Indoor & Outdoor Air Conditioners
G52 Indoor Model
G57 Outdoor Model
18
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products

Makes electronics cooling easier,
so you can go about your business
SPECTRACOOL™ Indoor & Outdoor
Air Conditioners
Product Overview
SPECTRACOOL
Chapter Contents
Indoor and Outdoor Base Models . . . . . . 20
G52 Models 8000/12000 BTU/Hr.. . . . . . . . 21
G57 Models 20000 BTU/Hr.. . . . . . . . . . . . . . 28
An energy-efficient rotary compressor and new earth-friendly
refrigerant provide reliable cooling in rugged indoor and outdoor
environments. All models are built with corrosion-resistant
components and are Telcordia GR-487 capable.
Applications
• Industrial automation
• Telecommunications equipment
• Wastewater treatment systems
• Package handling equipment
• Security and defense systems
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
19

: 
Product Overview

SPECTRACOOL A/C
McLean Cooling Technology: Air Conditioners
SPECTRACOOL™
McLean Cooling Technology
Air Conditioners
SPECTRACOOL™
Indoor and Outdoor Base Models
G52 Indoor Model
8000 & 12000 BTU/Hr.
2300 & 3500 Watts
G57 Indoor Model
20000 BTU/Hr.
5900 Watts
G52 Outdoor Model
8000 & 12000 BTU/Hr.
2300 & 3500 Watts
Industry Standards
UL/cUL Listed Type 12, 3R, 4
CE
IP 56 Internal Loop
IP 34 on External Loop
Telcordia GR-487 capable (Outdoor)
Application
••
••
••
••
••
••
Industrial automation
T elecommunications equipment
Waste water treatment systems
Package handling equipment
Security and defense systems
And more
Features
••
••
••
••
••
••
••
••
••
••
••
Energy efficient rotary compressor
134a earth-friendly refrigerant and RoHS compliant
R
Models for 115, 230 and 400/460 3-phase AC volt power input
UL Listed to save customers time and money with agency
approvals
Outdoor model operating temperature range from -40 F/-40 C to
131 F/55 C
Exterior and partial recessed mounting options
Attractive industrial design with minimal use of visible fasteners
Reliable mechanical thermostat on enclosure side of the unit.
Indoor Air Conditioner models include digital display on ambient
side.
Dual condenser-side air movers for performance redundancy
Galvanized sheet-metal cover for rugged factory and outdoor
environments
Easy-mount flanges for simple installation
20
Subject to change without notice
G57 Outdoor Model
20000 BTU/Hr.
5900 Watts
Clean Air Flow
Ambient Air Flow
•• C
ut-out adapter options for enclosures with McLean GENESIS® and
T-Series air conditioners, enabling users to easily transition to the
new unit
•• Cleanable, reusable aluminum mesh filter to protect coils for
maximum cooling performance
•• Mounting hardware, gaskets and user manual furnished with the
unit
•• Every unit functionally tested before shipping
•• Standard Indoor Air Conditioner models also include:
- Active condensate management with heater strip
- Power-off relay for door switch and other system requirements
- Malfunction switch
•• Standard Outdoor Air Conditioner models also include:
- Telcordia GR-487 capable
- Corrosion-resistant components
- Malfunction switch
- Compressor heater
- Head pressure control
- 2000 Watt enclosure heater
Specifications
•• N
ominal cooling capacity 8000 & 12000 BTUs/Hr. (2300 and 3500
Watts)
•• R134a earth-friendly refrigerant and RoHS compliant
•• Outdoor model operating temperature range from -40 F/-40 C to
131 F/55 C
Finish
•• R
AL 7035 light-gray powder-coat paint in a semi-texture finish
•• Other colors and textures available
Notes
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD
drawings into the overall design of your electronic system.
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data G52 Models 8000/12000 BTU/Hr. (2300/3500 Watt)
Power Input Description
ENCLOSURE PROTECTION
UL Type
G52-0816-G050
G52-0816-G150
G52-0826-G050
G52-0826-G150
G52-0846-G050
G52-0846-G150
G52-1216-G050
G52-1216-G150
G52-1226-G050
G52-1226-G150
G52-1246-G050
G52-1246-G150
8000
2300
8000
2300
8000
2300
12000
3500
12000
3500
12000
3500
7300/8200
2139/2403
7300/8200
2139/2403
8800/9800
2578/2871
12000/12500
3516/3662
12000/12500
3516/3662
11100/12000
3252/3516
6000/6800
1758/1992
R134a
24/680
6000/6800
1758/1992
R134a
24/680
7400/8200
2168/2402
R134a
24/680
9900/10700
2900/3135
R134a
38/1077
9900/10700
2900/3135
R134a
38/1077
9900/10700
2900/3135
R134a
38/1077
131/55
50/10
-40/-40
131/55
50/10
-40/-40
131/55
50/10
-40/-40
131/55
50/10
-40/-40
131/55
50/10
-40/-40
131/55
50/10
-40/-40
285/484
650/1104
310/527
700/1189
2000
285/484
650/1104
310/527
700/1189
2000
285/484
650/1104
310/527
700/1189
NA
287/487
635/1078
305/518
650/1104
2000
287/487
635/1078
305/518
650/1104
2000
287/487
635/1078
305/518
650/1104
NA
115
50/60
+/- 10%
1250/1415
11.2/12.3
48
230/208-230
50/60
+/- 10%
1250/1415
5.6/7.0-6.2
27
230/208-230
50/60
+/- 10%
1830/2130
9.1/10.6-9.5
38
400/460 3~
50/60
+/- 10%
910/1106*
3.5/3.7
16
IEC plug with
10-ft./3-m cord
IEC plug with
10-ft./3-m cord
IEC plug with
10-ft./3-m cord
Terminal block
Type 12/3R/4 standard
4X stainless steel optional
IP56 Internal Loop
IP34 External Loop
International Rating
CONTROLLER
Description
Thermostat Location
Digital Display Location:
Indoor Models
Outdoor Models
Factory Thermostat Setting (F/C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Basic mechanical thermostat with digital display
Enclosure side on all base models
Ambient side
Enclosure side
80/27
68dBA
Galvanized sheet metal standard
Stainless steel optional
Powder coat RAL 7035 light gray semi-textured standard
Other colors available
Finish
ACCESSORIES
Cleanable Re-Usable Filter
Indoor Cut-Out Adapter
Outdoor Cut-Out Adapter
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
*Watts based on .65 power factor.
Subject to change without notice
400/460 3~
115
50/60
50/60
+/- 10%
+/- 10%
806/957*
2100/2427
3.1/3.2
16.1/21.0
16
57
cUL Listed
CE
Others available upon request
Terminal block
IEC plug with
10-ft./3-m cord
SPECTRACOOL A/C
MODEL NUMBER
Indoor
Outdoor
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
At 131 F / 131 F (55 C / 55 C):
BTUs/Hr.
Watts
At 95 F / 95 F (35 C / 35 C):
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Indoor Minimum (°F/°C)
Outdoor Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
Max. Heater Watts (Outdoor Models):
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts)
Max. Nominal Current (Amps)
Starting Current (Amps)
Agency Approvals
Aluminum mesh Part #10-1000-103
Enables SPECTRACOOL to be mounted to a GENESIS M52 air conditioner cut-out Part #52-6216-01
Enables SPECTRACOOL to be mounted to a T-Series T50 air conditioner cut-out Part #52-6216-03
128/58.1
128/58.1
52.69/1338
17.12/435
11.66/296
138/62.6
131/59.4
131/59.4
141/64.0
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
21
McLean Cooling Technology: Air Conditioners
SPECTRACOOL™
Capacity (BTU/Hr.)
Performance Curves for G52 Models 8000 BTU/Hr. (2300 Watt)
Capacity (BTU/Hr.)
SPECTRACOOL A/C
McLean Cooling Technology: Air Conditioners
SPECTRACOOL™
22
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Capacity (BTU/Hr.)
SPECTRACOOL A/C
Capacity (BTU/Hr.)
Performance Curves for G52 Models 8000 BTU/Hr. (2300 Watt)
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
23
McLean Cooling Technology: Air Conditioners
SPECTRACOOL™
Capacity (BTU/Hr.)
Performance Curves for G52 Models 12000 BTU/Hr. (3500 Watt)
Capacity (BTU/Hr.)
SPECTRACOOL A/C
McLean Cooling Technology: Air Conditioners
SPECTRACOOL™
24
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Capacity (BTU/Hr.)
SPECTRACOOL A/C
Capacity (BTU/Hr.)
Performance Curves for G52 Models 12000 BTU/Hr. (3500 Watt)
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
25
McLean Cooling Technology: Air Conditioners
SPECTRACOOL™
SPECTRACOOL A/C
McLean Cooling Technology: Air Conditioners
SPECTRACOOL™
G52 Models 8000/12000 BTU/Hr. (2300/3500 Watt)
89044798
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
26
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
G52 Models 8000/12000 BTU/Hr. (2300/3500 Watt) With Partial Recess
SPECTRACOOL A/C
87907809
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
27
McLean Cooling Technology: Air Conditioners
SPECTRACOOL™
SPECTRACOOL A/C
McLean Cooling Technology: Air Conditioners
SPECTRACOOL™
Performance Data G57 Models 20000 BTU/Hr. (5861 Watt)
MODEL NUMBER
Indoor
Outdoor
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
At 131 F/131 F (55 C/55 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
At 95 F/95 F (35 C/35 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Indoor Minimum (°F/°C)
Outdoor Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
Max. Heater Watts (Outdoor Models)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
G57-2026-G050
G57-2026-G150
G57-2046-G050
G57-2046-G150
20000
5861
20000
5861
17500/19600
5129/5744
21400/23400
6272/6857
16000/18000
4689/5275
R407c
50/1417
19300/21400
5656/6272
R407c
48/1361
131/55
50/10
-40/-40
131/55
50/10
-40/-40
513/872
919/1562
587/998
1055/1794
3000
513/872
919/1562
587/998
1055/1794
NA
230/230
50/60
+/- 10%
2900/3319
19.6/22.2
63
400/460 3~
50/60
+/- 10%
1560/2033*
6.0/6.8
27
cUL Listed
CE
Others available upon request
IEC plug with
Terminal Block
10-ft./3-m cord
Type 12, 3R, 4 Standard
4X Stainless Steel Optional
IP56 Internal Loop
IP34 External Loop
International Rating
CONTROLLER
Description
Thermostat Location
Digital Display Location:
Indoor Models
Outdoor Models
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 m
UNIT CONSTRUCTION
Material
Finish
ACCESSORIES
Cleanable Re-Usable Filter
Outdoor Model Cut-Out Adapter
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
* Watts based on .65 power factor
28
Subject to change without notice
Basic Mechanical Thermostat with Digital Display
Enclosure Side on All Base Models
Ambient Side
Enclosure Side
80/27
74.1
Galvanized Sheet Metal Standard
Stainless Steel Optional
Powder Coat RAL 7035 Light Gray Semi-Textured Standard
Aluminum Mesh Part #10-1000-103 BA
Enables SPECTRACOOL to be mounted to a T-Series
T53 air conditioner cut-out Part #57-7216-01
197/89
57.69/1465.4
20.78/527.8
15.29/388.3
197/89
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Curves for G57 Models 20000 BTU/Hr.
**;;;&DSDFLW\&XUYH+]
$PELHQW7HPSHUDWXUH
&)
&)
&
&
&
&
&
&)
5HWXUQ$LU7HPSƒ)
**;;;&DSDFLW\&XUYH+]
5HWXUQ$LU7HPSƒ&
$PELHQW7HPSHUDWXUH
&
&
&
&
&)
&)
&)
&
&DSDFLW\:DWWV
&DSDFLW\%78+U
5HWXUQ$LU7HPSƒ)
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
29
SPECTRACOOL A/C
&DSDFLW\%78+U
5HWXUQ$LU7HPSƒ&
&DSDFLW\:DWWV
McLean Cooling Technology: Air Conditioners
SPECTRACOOL™
Performance Curves for G57 Models 20000 BTU/Hr.
**;;;&DSDFLW\&XUYH+]
5HWXUQ$LU7HPSƒ&
$PELHQW7HPSHUDWXUH
&)
&)
&
&
&
&
&
&)
&DSDFLW\:DWWV
&DSDFLW\%78+U
5HWXUQ$LU7HPSƒ)
**;;;&DSDFLW\&XUYH+]
5HWXUQ$LU7HPSƒ&
&)
&
&
&)
&
&
&
&)
&DSDFLW\:DWWV
$PELHQW7HPSHUDWXUH
&DSDFLW\%78+U
SPECTRACOOL A/C
McLean Cooling Technology: Air Conditioners
SPECTRACOOL™
5HWXUQ$LU7HPSƒ)
30
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
G57 Models 20000 BTU/Hr. (5861 Watt)
SPECTRACOOL A/C
89048414
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
31
McLean Cooling Technology: Air Conditioners
SPECTRACOOL™
SPECTRACOOL A/C
McLean Cooling Technology: Air Conditioners
SPECTRACOOL™
G57 Models 20000 BTU/Hr. (5861 Watt) With Partial Recess
89048415
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
32
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Notes
SPECTRACOOL A/C
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
33
McLean Cooling Technology: Air Conditioners
SPECTRACOOL™

McLean Cooling Technology: Air Conditioners: 
Product Overview

T-Series
Indoor/Outdoor Air Conditioners
T70 Model
(3 ton)
T53 Model
T29 Model
34
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products

: 
Product Overview

Keeps its cool during
peak heat loads and hot weather
T-Series Indoor/Outdoor
Air Conditioners
PRODUCT OVERVIEW
The perfect cooling system where precise temperature control is
needed. Built rugged to perform in extremely hot and cold ambient
temperatures. Engineered to seal out virtually any bad weather. APPLICATIONS
• Telecommunications cabinets and shelters
T-Series Chapter Contents
Indoor/Outdoor Air Conditioners. . . . . . . .36
T15 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
T20 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
T29 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
T43 6000 BTU Model. . . . . . . . . . . . . . . . . . . . 46
T43 8000 BTU Model. . . . . . . . . . . . . . . . . . . . 48
T43 10000 BTU Model. . . . . . . . . . . . . . . . . . . 50
T50 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
T53 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
T62 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
T70-36 Model. . . . . . . . . . . . . . . . . . . . . . . . . . . 62
T70-60 Model . . . . . . . . . . . . . . . . . . . . . . . . . . 65
• Transportation controls
• Outdoor security systems
• Mobile communications systems
• Other outdoor electronics applications
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
35
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
McLean Cooling Technology
Air Conditioners
T-Series
Indoor/Outdoor Air Conditioners
T15
800 BTU/Hr.
234 Watts
T20
2000 BTU/Hr.
586 Watts
T29
4000 BTU/Hr.
1173 Watts
T62
20000 BTU/Hr.
5860 Watts
T43
6000, 8000, 10000 BTU/Hr.
1758, 2344, 2930 Watts
T70-36
36000 BTU/Hr.
10548 Watts
Industry Standards
UL/cUL Listed, CE, others available upon request
•• T ype 12/3R/4
•• Type 4X stainless steel option
•• Telcordia GR-487 capable
Application
••
••
••
••
••
Industrial automation
T elecommunications equipment
Package handling equipment
Security and defense systems
And more
T50
12000 BTU/Hr.
3516 Watts
T70-60
59000 BTU/Hr.
17287 Watts
•• C
leanable, reusable aluminum mesh filter to protect coils for
maximum cooling performance
•• Mounting hardware, gaskets and user manual furnished with the
unit
•• Every unit functionally tested before shipping
•• Standard Outdoor Air Conditioner models also include:
- Telcordia GR-487 capable
- Thermostat
- Corrosion-resistant components
- Malfunction switch
- Compressor heater
- Head pressure control
- Enclosure heater
Features
Finish
•• S tock models equipped with head pressure control for lowambient operation, compressor heater, coated condenser coil,
malfunction switch, thermostat and heater package
•• R134A or R-407C earth-friendly refrigerant and RoHS compliant
•• Models for 115, 230 and 460 Volt AC power input
•• UL Listed to save customers time and money with agency
approvals (some models UL recognized)
•• Outdoor model operating temperature range from -40 F/-40 C to
131 F/55 C
•• Exterior and fully recessed mounting options on many models
•• Compact footprint to minimize real estate and maximize capacity
•• Reliable mechanical thermostat on enclosure side of the unit
•• Dual condenser-side air movers for performance redundancy
•• Painted galvanized sheet-metal cover for rugged factory and
outdoor environments
•• Easy-mount flanges for simple installation
•• R
AL 7035 light-gray powder-coat paint finish
•• Other colors and textures available
36
Subject to change without notice
T53
19000 BTU/Hr.
5567 Watts
Options
••
••
••
••
••
••
T hermostat Malfunction Package
Special Voltage Package
Outdoor Package
Harsh Environment Package*
Stainless Steel Package*
Heater Package
* PROAIR A/C may be more appropriate. Refer to PROAIR A/C
chapter. Consult the factory for availability and catalog number.
Notes
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD
drawings into the overall design of your electronic system.
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data T15 Models 800 BTU/Hr. (234 Watt)
MODEL NUMBER
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (ºF/ºC)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
Subject to change without notice
T15-0116-G150
T15-0126-G150
800/800
235/235
800/900
235/264
819
240
920/960
270/281
948
278
R-134A
4/113
810/955
237/280
R-134A
3.8/107
131/55
-40/-40
125/131/52/55
-40/-40
25/42
48/82
30/51
53/90
150
25/42
48/82
30/51
53/90
150
100/115
50/60
+/- 10%
360/403
3.6/3.5
8.0/9.2
220/230
50/60
+/- 10%
330/345
1.5/1.5
3.3/3.1
T-Series A/C
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
At 131 F/131 F (55 C/55 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
At 95 F/95 F (35 C/35 C):
BTUs/Hr. (50 /60 Hz)
Watts (50/60 Hz)
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (ºF/ºC)
Minimum (ºF/ºC)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
Max. Heater Watts (Outdoor Models)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
cUL Listed
CE
Others available upon request
NEMA 5-15 plug on 6-ft. cord
NEMA 6-15 plug on 6-ft. cord
Type 12/3R/4 Standard
4X Stainless Steel Optional
Basic Mechanical Thermostat
Enclosure Behind Front Panel
80/27
63 dBA
Galvanized Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
15.75/400
7.5/191
6.3/160
27/12
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
37
McLean Cooling Technology: Air Conditioners
T-Series
Performance Curves for T15 Models 800 BTU/Hr. (234 Watt)
T15-01x6-Gxxx Capacity Curves 50 Hz
35 C Ambient
Capacity (BTU/Hr.)
45 C Ambient
52 C Ambient
Return Air Temp (°C)
T15-01x6-Gxxx Capacity Curves 60 Hz
35 C Ambient
Capacity (BTU/Hr.)
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
45 C Ambient
55 C Ambient
38
Subject to change without notice
Return Air Temp (°C)
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
T15 Models 800 BTU/Hr. (234 Watt)
723
)LHOGFKDQJHDEOH
SRZHUFRUGORFDWLRQ
RSSRVLWHVLGHRIXQLW
(QF
$LU
,Q
$PE
$LU
2XW
3RZHU
&RUG
([LW
(QF
$LU
2XW
T-Series A/C
$PE
$LU
,Q
5,*+7
)5217
'UDLQ6WXE
0RXQWLQJKDUGZDUHIRUIXOO\UHFHVVHG
PRXQWLQJLVEHKLQGUHPRYDEOHIURQWFRYHU
&OHDQDEOHUHXVDEOHDOXPLQXPLQOHWILOWHU
VOLGHVRXWVORWLQERWWRPRIIURQWFRYHU
%$&.
0RXQWLQJ+ROHV
RQEDFNIDFHEHKLQGIURQWFRYHU
2SWLRQDOFXWRXWV
IRUWKHUPRVWDW
DGMXVWPHQWDFFHVV
89043915
(;7(51$//<02817('
,17(51$//<02817('
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
39
McLean Cooling Technology: Air Conditioners
T-Series
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
Performance Data T20 Models 2000 BTU/Hr. (586 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
At 131 F/131 F (49 C/49 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
At 95 F/95 F (35 C/35 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
Max. Heater Watts (Outdoor Models)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
T20-0216-G150
T20-0226-G150
T20-0246-G400
1800/2000
528/586
1800/2000
528/586
1800/2000
528/586
2000/2175
586/637
2000/2175
586/637
2000/2175
586/637
1950/2200
571/645
R-134A
6.7/190
1950/2200
571/645
R-134A
6.7/190
1950/2200
571/645
R-134A
6.7/190
131/55
-40/-40
131/55
-40/-40
131/55
-40/-40
77/131
150/255
91/155
165/280
500
77/131
150/255
91/155
165/280
500
77/131
150/255
91/155
165/280
500
115
50/60
+/- 10%
805
7.0/7.0
28
230
50/60
+/- 10%
805
3.5/3.5
14.4
460V 1PH
50/60
+/- 10%
874
1.9
7.2
cUR
CE
cUL Listed
CE
Others available upon request
NEMA 5-15 plug on 6-ft. cord NEMA 6-15 plug on 6-ft. cord
Type 12/3R/4 Standard
4X Stainless Steel Optional
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
40
Subject to change without notice
6-ft. cord with wire terminations
Basic Mechanical Thermostat
Enclosure Side on All Base Models
80/27
66 dBA
Galvanized Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
20/508
10/254
9.9/251
56/25
20/508
10/254
9.9/251
56/25
24.25/615.95
10/254
9.9/251
66/30
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Curves for T20 Models 2000 BTU/Hr. (586 Watt)
T20-02x6-Gxxx Capacity Curves 50 Hz
Capacity (BTU/Hr.)
35 C Ambient
45 C Ambient
55 C Ambient
Return Air Temp (°C)
T20-02x6-Gxxx Capacity Curves 60 Hz
35 C Ambient
Capacity (BTU/Hr.)
T-Series A/C
45 C Ambient
55 C Ambient
Subject to change without notice
Return Air Temp (°C)
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
41
McLean Cooling Technology: Air Conditioners
T-Series
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
T20 Models 2000 BTU/Hr. (586 Watt)
(QF
$LU
,Q
$PE
$LU
2XW
7VWDW
$GMXVWPHQW
5HPRYDEOH
+DQJLQJ
7DEV
$PE
$LU
,Q
(QF
$LU
2XW
3RZHU
&RUG
(QWHUDQFH
6,'(
)5217
%$&.
0RXQWLQJKDUGZDUHIRUIXOO\UHFHVVHG
PRXQWLQJLVEHKLQGUHPRYDEOHIURQWFRYHU
&OHDQDEOHUHXVDEOHDOXPLQXPLQOHWILOWHU
VOLGHVRXWVORWLQERWWRPRIIURQWFRYHU
0RXQWLQJ+ROHV
RQEDFNIDFHEHKLQGIURQWFRYHU
%27720
'UDLQ6WXE
89043916
(;7(51$//<02817('
,17(51$//<02817('
&87287,16758&7,216
127(6
'DVKHGOLQHVUHSUHVHQWDLUFRQGLWLRQHU
$VYLHZHGIURPRXWVLGHRIHQFORVXUH
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
42
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data T29 Models 4000 BTU/Hr. (1173 Watt)
MODEL NUMBER
Power Input Description
ENCLOSURE PROTECTION
UL Type
T29-0416-G150
T29-0426-G150
T29-0446-G400
3600/4000
1055/1172
3600/4000
1055/1172
3600/4000
1055/1172
3950/4250
1157/1245
3950/4250
1157/1245
3950/4250
1157/1245
3500/3900
1025/1143
R-134A
14.3/404
3500/3900
1025/1143
R-134A
14.3/404
3500/3900
1025/1143
R-134A
14.3/404
131/55
-40/-40
131/55
-40/-40
131/55
-40/-40
172/292
195/331
205/348
235/399
1000
172/292
195/331
205/348
235/399
1000
172/292
195/331
205/348
235/399
115
50/60
+/- 10%
1587/1564
13.8/13.6
48
230
50/60
+/- 10%
1587/1564
6.9/6.8
23
460V 1PH
50/60
+/- 10%
1748
3.8
12
cUR Recognized
CE
cUL Listed
CE
Others available upon request
NEMA 5-20 plug on 6-ft. cord NEMA 6-15 plug on 6-ft. cord
Subject to change without notice
6-ft. cord with wire terminations
Type 12/3R/4 Standard
4X Stainless Steel Optional
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 M
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
T-Series A/C
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
At 131 F/131 F (55 C/55 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
At 95 F/95 F (35 C/35 C):
BTUs/Hr. (50 /60 Hz)
Watts (50/60 Hz)
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
Max. Heater Watts (Outdoor Models)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Basic Mechanical Thermostat
Enclosure Side on All Base Models
80/27
67 dBA
Galvanized Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
29/737
17/432
11.3/287
107/48.6
29/737
17/432
11.3/287
107/48.6
29/737
17/432
11.3/287
127/58
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
43
McLean Cooling Technology: Air Conditioners
T-Series
Performance Curves for T29 Models 4000 BTU/Hr. (1173 Watt)
T29-04x6-Gxxx Capacity Curves 50 Hz
Capacity (BTU/Hr.)
35 C Ambient
45 C Ambient
55 C Ambient
Enclosure Return Air Temp (°C)
T29-04x6-Gxx Capacity Curves 60 Hz
Capacity (BTU/Hr.)
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
35 C Ambient
45 C Ambient
55 C Ambient
44
Subject to change without notice
Enclosure Return Air Temp (°C)
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
T29 Models 4000 BTU/Hr. (1173 Watt)
(QF
$LU
,Q
$PE
$LU
2XW
3RZHU&RUG
(QWUDQFH
5HPRYDEOH
+DQJLQJ
7DEV
&RQWUROV
$FFHVV
3ODWH
$PE
$LU
,Q
(QF
$LU
2XW
6,'(
0RXQWLQJKDUGZDUHIRUIXOO\UHFHVVHG
PRXQWLQJLVEHKLQGUHPRYDEOHIURQWFRYHU
&OHDQDEOHUHXVDEOHDOXPLQXPLQOHWILOWHU
VOLGHVRXWVORWLQERWWRPRIIURQWFRYHU
)5217
%$&.
0RXQWLQJKROHV
RQEDFNIDFHEHKLQGIURQWFRYHU
T-Series A/C
'UDLQ
6WXE
%27720
R 2SWLRQDO&XWRXW
IRU&RQWUROV$FFHVV
R2SWLRQDOFXWRXW
IRU7VWDWDGMXVWPHQW
DFFHVVRQO\
1RWHV
'DVKHGOLQHVUHSUHVHQWDLUFRQGLWLRQHU
,QWHUQDOO\0RXQWHG
([WHUQDOO\0RXQWHG
89043917
&87287,16758&7,216
DVYLHZHGIURPRXWVLGHHQFORVXUH
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
45
McLean Cooling Technology: Air Conditioners
T-Series
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
Performance Data T43 Models 6000 BTU/Hr. (1758 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
At 131 F/131 F (55 C/55 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
At 95 F/95 F (35 C/35 C):
BTUs/Hr. (50 /60 Hz)
Watts (50/60 Hz)
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
Max. Heater Watts (Outdoor Models)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
International Rating
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 M
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
46
Subject to change without notice
T43-0616-G150
T43-0626-G150
T43-0646-G400
6310/6680
1848/1958
6520/6770
1910/1985
6520/6770
1910/1985
6400/6680
1875/1957
6520/6774
1910/1985
6520/6774
1910/1985
5500/5900
1611/1729
R-134A
30/850
5461/5846
1600/1713
R-134A
30/850
5461/5846
1600/1713
R-134A
30/850
131/55
-40/-40
131/55
-40/-40
131/55
-40/-40
310/527
345/586
320/544
355/603
1000
310/527
345/586
320/544
355/603
1000
310/527
345/586
320/544
355/603
N/A
115
50/60
+/- 10%
1058/989
9.2/8.6
57.2
230
50/60
+/- 10%
1012/874
4.4/3.8
27
460V 1PH
50/60
+/- 10%
1104/966
2.4/2.1
14
cUR Recognized
CE
cUL Listed
CE
Others available upon request
NEMA 5-20 plug on 6-ft. cord
NEMA 6-15 plug on 6-ft. cord
6-ft. cord with wire leads
Type 12/3R/4 Standard
4X Stainless Steel Optional
IP56 on the internal loop; IP34 on the external loop
Basic Mechanical Thermostat
Enclosure Side on All Base Models
80/27
65.7 dBA
Galvanized Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
43/1092
15.75/400
10.9/279
125/57
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Curves for T43 Models 6000 BTU/Hr. (1758 Watt)
T43-06X6-G150 Capacity Curves 50 Hz
8000
35 C Ambient
7500
45 C Ambient
Capacity (BTU/Hr.)
7000
6500
55 C Ambient
6000
5500
5000
4500
4000
3500
30
35
40
45
50
55
T43-06X6-G150 Capacity Curves 50 Hz
Capacity (BTU/Hr.)
60
T-Series A/C
Return Air Temp (°C)
35 C Ambient
45 C Ambient
55 C Ambient
Subject to change without notice
Return Air Temp (°C)
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
47
McLean Cooling Technology: Air Conditioners
T-Series
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
Performance Data T43 Models 8000 BTU/Hr. (2344 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
At 131 F/131 F (55 C/55 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
At 95 F/95 F (35 C/35 C):
BTUs/Hr. (50 /60 Hz)
Watts (50/60 Hz)
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
Max. Heater Watts (Outdoor Models)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
International Rating
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 M
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
48
Subject to change without notice
T43-0816-G150
T43-0826-G150
T43-0846-G150
7900/8600
2310/2500
7400/8200
2160/2400
7400/8200
2160/2400
7937/8629
2326/2528
7484/8215
2193/2407
7484/8215
2193/2407
6401/7100
1875/2080
R-134A
36/1022
5940/6705
1740/1965
R-134A
36/1022
5940/6705
1740/1965
R-134A
36/1022
131/55
-40/-40
131/55
-40/-40
131/55
-40/-40
273/464
310/527
290/493
315/535
1000
273/464
310/527
290/493
315/535
1000
273/464
310/527
290/493
315/535
N/A
115
50/60
+/- 10%
1196/1288
10.4/11.2
48.3
230
50/60
+/- 10%
1196/1242
5.2/5.4
27
460V 1PH
50/60
+/- 10%
1334/1380
2.9/3.0
14
cUR Recognized
CE
cUL Listed
CE
Others available upon request
NEMA 5-20 plug on 6-ft. cord
NEMA 6-15 plug on 6 ft. cord
6-ft. cord with wire leads
Type 12/3R/4 Standard
4X Stainless Steel Optional
IP56 on the internal loop; IP34 on the external loop
Basic Mechanical Thermostat
Enclosure Side on All Base Models
80/27
65.7 dBA
Galvanized Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
43/1092
15.75/400
10.9/279
125/57
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Curves for T43 Models 8000 BTU/Hr. (2344 Watt)
T43-08X6-G150 Capacity Curves 50 Hz
8000
35 C Ambient
7500
45 C Ambient
Capacity (BTU/Hr.)
7000
55 C Ambient
6500
6000
5500
5000
4500
4000
3500
30
35
40
45
50
55
Return Air Temp (°C)
60
T-Series A/C
T43-08X6-G150 Capacity Curves 60 Hz
35 C Ambient
45 C Ambient
Capacity (BTU/Hr.)
55 C Ambient
Subject to change without notice
Return Air Temp (°C)
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
49
McLean Cooling Technology: Air Conditioners
T-Series
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
Performance Data T43 Models 10000 BTU/Hr. (2930 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
At 131 F/131 F (55 C/55 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
At 95 F/95 F (35 C/35 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
Max. Heater Watts (Outdoor Models)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
International Rating
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 M
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
50
Subject to change without notice
T43-1016-G150
T43-1026-G150
T43-1046-G400
9670/10300
2831/3016
10100/10500
2957/3075
10100/10500
2957/3075
9667/10290
2832/3015
10039/10669
2941/3126
10039/10669
2941/3126
7663/8397
2245/2460
R-134A
32/907
8458/8837
2478/2589
R-134A
32/907
8458/8837
2478/2589
R-134A
32/907
131/55
-40/-40
131/55
-40/-40
131/55
-40/-40
272/462
510/866
290/493
565/960
1000
320/544
568/965
330/561
636/1081
1000
320/544
568/965
330/561
636/1081
N/A
115
50/60
+/- 10%
1828.5/2288.5
15.9/19.9
57
230
50/60
+/- 10%
2070
9
38
460V 1PH
50/60
+/- 10%
1334/1380
5
20
cUR Recognized
CE
cUL Listed
CE
Others available upon request
NEMA 5-30 plug on 6-ft. cord
NEMA 6-15 plug on 6-ft. cord
6-ft. cord with wire leads
Type 12/3R/4 Standard
4X Stainless Steel Optional
IP56 on the internal loop; IP34 on the external loop
Basic Mechanical Thermostat
Enclosure Side on All Base Models
80/27
73.3 dBA
Galvanized Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
43/1092
15.75/400
10.9/279
125/57
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Curves for T43 Models 10000 BTU/Hr. (2930 Watt)
T43-10X6-G150 Capacity Curves 50 Hz
35 C Ambient
Capacity (BTU/Hr.)
45 C Ambient
55 C Ambient
T-Series A/C
Return Air Temp (°C)
T43-10X6-G150 Capacity Curves 60 Hz
35 C Ambient
Capacity (BTU/Hr.)
45 C Ambient
55 C Ambient
Subject to change without notice
Return Air Temp (°C)
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
51
McLean Cooling Technology: Air Conditioners
T-Series
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
T43 6000 - 10000 Models BTU/Hr. (1758 - 2930 Watt)
FEF3F
36<GEF?7@F
89043918
7jfWd`S^^k?ag`fWV
;`fWd`S^^k?ag`fWV
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
52
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data T50 Models 12000 BTU/Hr. (3516 Watt)
MODEL NUMBER
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 M
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
Subject to change without notice
T50-1226-G150
T50-1246-G400
11000/12000
3223/3516
11000/12000
3223/3516
10030/12000
2939/3516
10030/12000
2939/3516
9300/10050
2725/2945
R-134A
46/1300
9300/10050
2725/2945
R-134A
46/1300
131/55
-40/-40
131/55
-40/-40
300/510
520/883
368/626
625/1062
1500
300/510
520/883
368/626
625/1062
1500
220/230
50/60
+/- 10%
1804/2139
8.2/9.3
38
cUL Listed
CE
NEMA 6-15 plug on 6-ft. cord
460V 1PH
50/60
+/- 10%
2070/2346
4.5/5.1
20
cUR Recognized
CE
6-ft. cord with wire terminations
T-Series A/C
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
At 131 F/131 F (55 C/55 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
At 95 F/95 F (35 C/35 C):
BTUs/Hr. (50 /60 Hz)
Watts (50/60 Hz)
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
Max. Heater Watts (Outdoor Models)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Type 12/3R/4 Standard
4X Stainless Steel Optional
Basic Mechanical Thermostat
Enclosure Side on All Base Models
80/27
68 dBA
68 dBA
Galvanized Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
50/1270
19/483
11.05/281
164/75
50/1270
19/483
11.05/281
164/75
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
53
McLean Cooling Technology: Air Conditioners
T-Series
Performance Curves for T50 Models 12000 BTU/Hr. (3516 Watt)
T50-12x6-GXXX Capacity Curves 50 Hz
Capacity (BTU/Hr.)
35 C Ambient
45 C Ambient
55 C Ambient
Return Air Temp (°C)
T50-12x6-GXXX Capacity Curves 60 Hz
35 C Ambient
Capacity (BTU/Hr.)
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
45 C Ambient
55 C Ambient
Return Air Temp (°C)
54
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
T50 Models 12000 BTU/Hr. (3516 Watt)
3RZHUFRUG
HQWUDQFH
$PE
$LU
2XW
(QF
$LU
,Q
76WDW
$GMXVWPHQW
(QF
$LU
2XW
$PE
$LU
,Q
5,*+7
)5217
%$&.
0RXQWLQJ+ROHV
T-Series A/C
'UDLQ+ROH
&OHDQDEOHUHXVDEOH
DOXPLQXPLQOHWILOWHU
EHKLQGUHPRYDEOHORXYHUV
%27720
R KROHVRQ
&& R KROHVRQ
&& 127(6
'DVKHGOLQHVUHSUHVHQW
DLUFRQGLWLRQHU
7jfWd`S^^k?ag`fWV
;`fWd`S^^k?ag`fWV
&87287,16758&7,21
89043919
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
55
McLean Cooling Technology: Air Conditioners
T-Series
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
Performance Data T53 Models 19000 BTU/Hr. (5567 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
At 131 F/131 F (55 C/55 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
At 95 F/95 F (35 C/35 C):
BTUs/Hr. (50 /60 Hz)
Watts (50/60 Hz)
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
Max. Heater Watts (Outdoor Models)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 M
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
56
Subject to change without notice
T53-1926-G150
T53-1946-G400
16800/19000
4922/5567
16800/19000
4922/5567
16854/19081
4939/5592
4939/5592
4939/5592
15240/19815
4466/5807
410A
40/1132
15240/19815
4466/5807
410A
40/1132
131/55
-40/-40
131/55
-40/-40
449/763
1204/2046
519/882
1300/2209
3000
449/763
1204/2046
519/882
1300/2209
230
50/60
+/- 10%
3979/4669
17.3/20.3
54
cUL Listed
CE
460V 1PH
50/60
+/- 10%
4370/5152
9.5/11.2
28
cUR Recognized
CE
Terminal Block
Type 12/3R/4 Standard
4X Stainless Steel Optional
Basic Mechanical Thermostat
Enclosure Side on All Base Models
80/27
76 dBA
Galvanized Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
197/90
53.0/1346.2
21.0/533.4
13.0/330.2
237/108
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Curves for T53 Models 19000 BTU/Hr. (5567 Watt)
T53-19x6-GXXX Capacity Curve 50 Hz
Return Air Temp (°C)
Ambient Temperature
Capacity (Watts)
Capacity (BTU/Hr.)
25C
20C/68F
55C/131F
50C
45C
40C
35C/95F
30C
Return Air Temp (°F)
T-Series A/C
T53-19x6-GXXX Capacity Curve 60 Hz
Return Air Temp (°C)
Ambient Temperature
Capacity (Watts)
Capacity (BTU/Hr.)
20C/68F
25C
30C
35C/95F
40C
45C
50C
55C/131F
Subject to change without notice
Return Air Temp (°F)
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
57
McLean Cooling Technology: Air Conditioners
T-Series
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
T53 Models 19000 BTU/Hr. (5567 Watt)
89043920
Externally Mounted
Cutout Instruction
Internally Mounted
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
58
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data T62 Models 20000 BTU/Hr. (5860 Watt)
MODEL NUMBER
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 M
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
Subject to change without notice
T62-2226-G150
T62-2246-G400
20500/23500
6007/6886
20500/23500
6007/6886
20860/23927
6113/7012
6113/7012
6113/7012
18258/20256
5351/5936
R-407C
42/1300
18258/20256
5351/5936
R-407C
42/1300
131/55
-40/-40
131/55
-40/-40
570/968
1443/2452
673/1143
1797/3053
2000
570/968
1443/2452
673/1143
1797/3053
Up to 3000 (Optional)
230
50/60
+/- 10%
4370/5060
19/22
60
cUL Listed
CE
Terminal Block
460V 1PH
50/60
+/- 10%
7000/9200
10.5/12
30
cUR Recognized
CE
Terminal Block
T-Series A/C
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
At 131 F/131 F (55 C/55 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
At 95 F/95 F (35 C/35 C):
BTUs/Hr. (50 /60 Hz)
Watts (50/60 Hz)
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
Max. Heater Watts (Outdoor Models)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Type 12/3R/4 Standard
4X Stainless Steel Optional
Basic Mechanical Thermostat
Enclosure Side on All Base Models
80/27
71 dBA
Galvanized Sheet Metal Standard
Powder Coat ANSI 70 Light Gray Standard
61.77/1568.96
19.91/505.71
17.36/440.94
218/99.1
61.77/1568.96
19.91/505.71
17.36/440.94
258/117
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
59
McLean Cooling Technology: Air Conditioners
T-Series
Performance Curves for T62 Models 20000 BTU/Hr. (5860 Watt)
T62-22x6-GXXX R-407c Capacity Curves 50 Hz
Return Air Temp (Enclosure Temp) °C
100 F/38 C Ambient
131 F/55 C Ambient
Capacity (Watts)
Capacity (BTU/Hr.)
70 F/21 C Ambient
Return Air Temp (Enclosure Temp) °F
T62-22x6-GXXX R-407c Capacity Curves 60 Hz
Return Air Temp (Enclosure Temp) °C
70 F/21 C Ambient
100 F/38 C Ambient
131 F/55 C Ambient
60
Capacity (Watts)
Capacity (BTU/Hr.)
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
Subject to change without notice
Return Air Temp (Enclosure Temp) °F
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
T62 Models 20000 BTU/Hr. (5860 Watt)
&OHDQDEOHUHXVHDEOH
DOXPLQXPLQOHWILOWHU
RSWLRQDO
*DVNHWIRUPRXQWLQJWRHQFORVXUHLQFOXGHG
0RXQWLQJ
(QFORVXUH
$LU,Q
(QFORVXUH
$LU2XW
-XQFWLRQ
%R[
/RZ9ROWDJH
(OHFWULFDO(QWUDQFH
/LQH9ROWDJH
(OHFWULFDO(QWUDQFH
$PELHQW
$LU,Q
/HIW6LGH
$PELHQW
$LU,Q
$PELHQW
$LU2XW
)URQW
5LJKW6LGH
$GMXVWDEOH
$LU'LYHUWHU
RSWLRQDO
T-Series A/C
%DFN
&RQGHQVDWH
'UDLQ
%RWWRP
&87287,16758&7,216
127(6
'DVKHGOLQHVUHSUHVHQWDLUFRQGLWLRQHU
89043921
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
61
McLean Cooling Technology: Air Conditioners
T-Series
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
Performance Data T70-36 Models 36000 BTU/Hr. (10548 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
At 131 F/131 F (55 C/55 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
At 95 F/95 F (35 C/35 C):
BTUs/Hr. (50 /60 Hz)
Watts (50/60 Hz)
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
Max. Heater Watts (Outdoor Models)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
International Rating
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 M
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
62
Subject to change without notice
T70-3626-G150
39000/43000
11430/12602
38613/42930
11316/12570
31364/36130
9192/10579
R-407C
110/3318
131/55
-40/-40
1085/1843
2176/3697
1171/1989
2347/3987
2000 Standard (5000 Optional)
230
50/60
+/- 10%
8280
36
104
cUL Listed
CE
Others available upon request
Terminal Block
Type 12/3R/4 Standard
4X Stainless Steel Optional
UL/cUL Listed
Basic Mechanical Thermostat
Enclosure Side on All Base Models
80/27
66 dBA
Galvanized Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
69.8/1772
22.8/578
20.94/532
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Curves for T70 Models 36000 BTU/Hr. (10548 Watt)
T70-3626-GXXX R-407c Capacity Curves 50 Hz
Return Air Temp (Enclosure Temp) °C
70 F/21 C Ambient
Capacity (BTU/Hr.)
100 F/38 C Ambient
131 F/55 C Ambient
Capacity (Watts)
Return Air Temp (Enclosure Temp) °F
T-Series A/C
T70-3626-GXXX R-407c Capacity Curves 60 Hz
Return Air Temp (Enclosure Temp) °C
70 F/21 C Ambient
100 F/38 C Ambient
Capacity (Watts)
Capacity (BTU/Hr.)
131 F/55 C Ambient
Subject to change without notice
Return Air Temp (Enclosure Temp) °F
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
63
McLean Cooling Technology: Air Conditioners
T-Series
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
T70 Models 36000 BTU/Hr. (10548 Watt)
0RXQWLQJ
&OHDQDEOH5HXVDEOH
$OXPLQXP,QOHW)LOWHU
(QFORVXUH
$LU,Q
-XQFWLRQ
%R[
(QFORVXUH
$LU2XW
/LQH
9ROWDJH
(OHFWULFDO
(QWUDQFH
$PELHQW
$LU,Q
$PELHQW
$LU2XW
$PELHQW
$LU,Q
$GMXVWDEOH
$LU'LYHUWHU
/HIW6LGH
%DFN
5LJKW6LGH
)URQW
*DVNHWIRUPRXQWLQJWR
HQFORVXUHLQFOXGHG
89043922
&RQGHQVDWH
'UDLQ
%RWWRP
&XW2XW,QVWUXFWLRQ
DVYLHZHGIURPRXWVLGHHQFORVXUH
1RWHV
'DVKHGOLQHVUHSUHVHQW
DLUFRQGLWLRQHU
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
64
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data T70-60 Models 59000 BTU/Hr. (17287 Watt)
MODEL NUMBER
Power Input Description
ENCLOSURE PROTECTION
UL Type
International Rating
Description
CONTROLLER
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 M
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
Subject to change without notice
T70-6026-G150
51900/60000
15210/17584
51900/60000
15210/17584
47122/54500
13810/15972
R-407C
150/4252
122/50
-40/-40
1510/2565
2716/4614
1629/2767
2931/4979
200/230
50/60
+/- 10%
7000/9200
35/40
144
cUL Listed
CE
Others available upon request
Terminal Block
T-Series A/C
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
At 122 F/122 F (50 C/50 C):
BTUs/Hr. (50/60 Hz)
Watts (50/60 Hz)
At 95 F/95 F (35 C/35 C):
BTUs/Hr. (50 /60 Hz)
Watts (50/60 Hz)
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
Max. Heater Watts (Outdoor Models)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Type 12/3R/4 Standard
4X Stainless Steel Optional
IP56 on the internal loop; IP34 on the external loop
Basic Mechanical Thermostat
Enclosure Side on All Base Models
80/27
66 dBA
Galvanized Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
69.77/1772
35.86/911
22.94/583
419/190.5
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
65
McLean Cooling Technology: Air Conditioners
T-Series
Performance Curves for T70 Models 59000 BTU/Hr. (17287 Watt)
T70-6026-GXXX R-407c Capacity Curves 50 Hz
Return Air Temp (Enclosure Temp) °C
70 F/21 C Ambient
100 F/38 C Ambient
120 F/49 C Ambient
Capacity (Watts)
Capacity (BTU/Hr.)
Return Air Temp (Enclosure Temp) °F
T70-6026-GXXX R-407c Capacity Curves 60 Hz
Return Air Temp (Enclosure Temp) °C
70 F/21 C Ambient
100 F/38 C Ambient
120 F/49 C Ambient
Capacity (Watts)
Capacity (BTU/Hr.)
T-Series A/C
McLean Cooling Technology: Air Conditioners
T-Series
66
Subject to change without notice
Return Air Temp (Enclosure Temp) °F
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
T70 Models 59000 BTU/Hr. (17287 Watt)
&/($1$%/(
5(86$%/(
$/80,180
,1/(7),/7(56
-81&7,21
%2;
(1&
$,5
,1
(1&
$,5
287
/2:
92/7$*(
(/(&75,&$/
(175$1&(
$0%
$,5
$0% 287
$,5
,1
$0%
$,5
,1
)5217
/()76,'(
$'-867$%/(
$,5',9(57(5
/,1(
92/7$*(
(/(&75,&$/
(175$1&(
5,*+76,'(
1RWHV
*DVNHWIRUPRXQW
WRHQFORVXUHLQFOXGHG
%$&.
89043923
0RXQWLQJ
%27720
T-Series A/C
&21'(16$7(
'5$,1
&XWRXW,QVWUXFWLRQ
DVYLHZHGIURPRXWVLGHHQFORVXUH
1RWHV
'DVKHGOLQHVUHSUHVHQW
DLUFRQGLWLRQHU
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
67
McLean Cooling Technology: Air Conditioners
T-Series

McLean Cooling Technology: Air Conditioners: 
Product Overview

GENESIS®
Indoor Air Conditioners
M52 460 Volt
3-Phase Model
M28 Model
M17 Model
68
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products

: 
Product Overview

The specifier’s choice for
cooling industrial process controls
GENESIS® Indoor Air Conditioners
PRODUCT OVERVIEW
The Type 12 air conditioner of choice for light-duty manufacturing
process control applications. Compact, narrow and 460 volt 3-phase
models available.
APPLICATIONS
• Industrial drive enclosures
GENESIS Chapter Contents
Indoor Air Conditioners . . . . . . . . . . . . . . . . 70
M13 Models 1000 BTU/Hr.. . . . . . . . . . . . . . . 71
M17 Models 1800 BTU/Hr.. . . . . . . . . . . . . . . 73
M28 Models 2200 BTU/Hr.. . . . . . . . . . . . . . . 75
M28 Models 4000 BTU/Hr.. . . . . . . . . . . . . . .76
M28 Models 6000 BTU/Hr.. . . . . . . . . . . . . . .77
M33 Models 4000 BTU/Hr.. . . . . . . . . . . . . . . 79
M36 Models 6000 BTU/Hr.. . . . . . . . . . . . . . .81
M52-3 Phase Models 
4100-10000 BTU/Hr.. . . . . . . . . . . . . . . . . . . 83
• Automotive assembly systems
• Material handling applications
• Other process control systems
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
69
GENESIS A/C
McLean Cooling Technology: Air Conditioners
GENESIS®
McLean Cooling Technology
Air Conditioners
GENESIS®
Indoor Air Conditioners
M17
1800 BTU/Hr.
527 Watt
M28
2200-6000 BTU/Hr.
645-1758 Watts
Industry Standards
UL/cUL Listed, CE, others available upon request
•• Type 12
Application
••
••
••
••
Industrial automation
ackage handling equipment
P
Security and defense systems
And more
••
••
••
••
••
••
Subject to change without notice
•• M
ounting hardware, gaskets and user manual furnished with the
unit
•• Every unit functionally tested before shipping
•• Standard Indoor Air Conditioner models also include:
- Electro-Mechanical Thermostat
- Surge Suppressor
- Condensate Management System
Finish
Robust reciprocating compressor
134a or R407c earth-friendly refrigerant and RoHS compliant
R
Models for 115, 230 and 460 single phase AC volt power input
UL Listed or Recognized to save customers time and money with
agency approvals
Operating temperature range from 50 F/10 C to 125 F/52 C
Attractive industrial design with minimal use of visible fasteners
Reliable mechanical thermostat located behind the filter of the
unit. Indoor Air Conditioner models include digital display on
ambient side.
Low-carbon mild-steel sheet-metal cover for rugged factory and
outdoor environments
Easy-mount flanges for simple installation
Cleanable, reusable aluminum mesh filter to protect coils for
maximum cooling performance
70
M52 3-Phase
4100-10000 BTU/Hr.
1201-2930 Watts
•• R
AL 7042 gray powder-coat paint in a semi-gloss finish
•• Other colors and textures available
Features
••
••
••
••
M36
6000 BTU/Hr.
1760 Watt
Options
••
••
••
••
••
••
••
T hermostat Malfunction Package
Special Voltage Package
Active Condensate Evaporator Package
Outdoor Package*
Harsh Environment Package*
Stainless Steel Package*
Heater Package*
* T-Series or PROAIR™ may be more appropriate. Refer to
T-Series A/C and PROAIR A/C chapters. Consult the factory for
availability and catalog number.
Notes
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD
drawings into the overall design of your electronic system.
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data M13 Models 1000 BTU/Hr. (293 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Subject to change without notice
M13-0126-G1008
M13-0116-G1400
800/1000
234/293
R-134A
5.5/156
800/1000
234/293
R-134A
5.5/156
800/1000
234/293
R-134A
5.5/156
125/52
50/10
125/52
50/10
125/52
50/10
71/121
75/127
74/126
78/132
75/127
71/121
78/132
74/126
75/127
71/121
78/132
74/126
115
50/60
+/- 10%
460
4
18
230
50/60
+/- 10%
483
2.2/2.1
8.5
460V 1PH
50/60
+/- 10%
552
1.2
5
cUR Recognized
CE
cUL Listed
CE
Others available upon request
NEMA 5-15 plug on 6- ft. cord NEMA 6-15 plug on 6-ft. cord
6-ft. cord with wire terminations
Type 12 Standard
Basic Mechanical Thermostat
Behind Filter
80/27
56 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat RAL 7042 Gray Standard
13.25/337
14.25/362
7.8/198
48/22
13.25/337
14.25/362
7.8/198
48/22
GENESIS A/C
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
M13-0116-G1014
17.75/450.9
14.25/362
7.8/198
58/26
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
71
McLean Cooling Technology: Air Conditioners
GENESIS®
GENESIS A/C
McLean Cooling Technology: Air Conditioners
GENESIS®
M13 Models 1000 BTU/Hr. (293 Watt)
89044973
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
72
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data M17 Models 1800 BTU/Hr. (527 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Subject to change without notice
M17-0226-G004
M17-0246-G400
1500/1800
440/527
R-134A
6/170
1500/1800
440/527
R-134A
6/170
1500/1800
440/527
R-134A
6/170
125/52
50/10
125/52
50/10
125/52
50/10
67/114
112/190
79/134
130/221
125/212
144/245
125/212
161/274
125/212
144/245
125/212
161/274
110/115
50/60
+/- 10%
726/770.5
6.6/6.7
28
220/230
50/60
+/- 10%
924/851
4.2/3.7
14.4
460V 1PH
50/60
+/- 10%
1058/920
2.3/2.0
7.4
cUR Recognized
CE
cUL Listed
CE
Others available upon request
NEMA 5-15 plug on 6-ft. cord NEMA 6-15 plug on 6-ft. cord
6-ft. cord with wire terminations
Type 12 Standard
Basic Mechanical Thermostat
Behind Filter
80/27
60 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat RAL 7042 Gray Standard
17.65/448
12/305
8.68/220
56/25
17.65/448
12/305
8.68/220
56/25
GENESIS A/C
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
M17-0216-G009
22.15/562.6
12/305
8.68/220
66/30
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
73
McLean Cooling Technology: Air Conditioners
GENESIS®
GENESIS A/C
McLean Cooling Technology: Air Conditioners
GENESIS®
M17 Models 1800 BTU/Hr. (527 Watt)
89044974
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
74
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data M28 Models 2200 BTU/Hr. (645 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Subject to change without notice
M28-0226-G004
M28-0246-G400
2200/2200
645/645
R-134A
11/312
2200/2200
645/645
R-134A
10/284
2200/2200
645/645
R-134A
10/284
125/52
50/10
125/52
50/10
125/52
50/10
146/248
230/391
170/289
260/442
175/297
225/382
210/357
255/433
175/297
225/382
210/357
255/433
115
50/60
+/- 10%
1127/1035
9.8/9.0
28
230
50/60
+/- 10%
1150/1035
5.0/4.5
14.4
460V 1PH
50/60
+/- 10%
1288/1150
2.8/2.5
7.4
cUR Recognized
CE
cUL Listed
CE
Others available upon request
NEMA 5-15 plug on 6-ft. cord NEMA 6-15 plug on 6-ft. cord
6-ft. cord with wire terminations
Type 12 Standard
Basic Mechanical Thermostat
Behind Filter
80/27
55 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat RAL 7042 Gray Standard
28.5/724
17/432
11.3/288
98/45
28.5/724
17/432
11.3/288
98/45
GENESIS A/C
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
M28-0216-G013
28.5/724
17/432
11.3/288
108/49
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
75
McLean Cooling Technology: Air Conditioners
GENESIS®
GENESIS A/C
McLean Cooling Technology: Air Conditioners
GENESIS®
Performance Data M28 Models 4000 BTU/Hr. (1172 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
76
Subject to change without notice
M28-0416-G007
M28-0426-G032
M28-0446-G400
3800/4000
1114/1172
R-134A
11/312
3800/4000
1114/1172
R-134A
11/312
3800/4000
1114/1172
R-134A
11/312
125/52
50/10
125/52
50/10
125/52
50/10
153/260
230/391
174/296
260/442
146/248
225/382
166/282
255/433
146/248
225/382
166/282
255/433
115
50/60
+/- 10%
1679/1610
14.6/14.0
48
230
50/60
+/- 10%
1702/1587
7.4/6.9
23
460V 1PH
50/60
+/- 10%
1886/1748
4.1/3.8
12
cUR Recognized
CE
cUL Listed
CE
Others available upon request
NEMA 5-20 plug on 6-ft. cord NEMA 6-15 plug on 6-ft. cord
6-ft. cord with wire terminations
Type 12 Standard
Basic Mechanical Thermostat
Behind Filter
80/27
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat RAL 7042 Gray Standard
28.5/724
17/432
11.3/288
116/53
28.5/724
17/432
11.3/288
116/53
28.5/724
17/432
11.3/288
136/62
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Technical Data M28 Models 6000 BTU/Hr. (1758 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Subject to change without notice
M28-0626-G005
M26-0646-G400
5400/6000
1582/1758
R-134A
15/425
5400/6000
1582/1758
R-134A
15/425
5400/6000
1582/1758
R-134A
15/425
125/52
50/10
125/52
50/10
125/52
50/10
153/260
325/552
174/296
373/634
146/248
325/552
166/282
373/634
146/248
325/552
166/282
373/634
115
50/60
+/- 10%
1886/1978
16.4/17.2
58.8
cUR Recognized
CE
6-ft. cord with wire terminations
230
50/60
+/- 10%
1840
8
27.4
cUL Listed
CE
NEMA 6-15 plug on 6-ft. cord
460V 1PH
50/60
+/- 10%
2024
4.4
14
cUR Recognized
CE
6-ft. cord with wire terminations
Type 12 Standard
Basic Mechanical Thermostat
Behind Filter
80/27
62 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat RAL 7042 Gray Standard
120/55
28.5/724
17/432
11.3/288
120/55
GENESIS A/C
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
M28-0616-G005
150/68
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
77
McLean Cooling Technology: Air Conditioners
GENESIS®
GENESIS A/C
McLean Cooling Technology: Air Conditioners
GENESIS®
M28 Models 2200-6000 BTU/Hr. (645-1758 Watt)
89044980
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
78
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data M33 Models 4000 BTU/Hr. (1172 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Subject to change without notice
M33-0426-G009
M33-0446-G400
3700/4000
1084/1172
R-134A
14/398
3700/4000
1084/1172
R-134A
14/398
3700/4000
1084/1172
R-134A
14/398
125/52
50/10
125/52
50/10
125/52
50/10
135/229
300/510
145/246
355/603
100/170
296/503
110/187
349/593
100/170
296/503
110/187
349/593
115
50/60
+/- 10%
1495/1518
13.0/13.2
48
230
50/60
+/- 10%
1656/1679
7.2/7.3
23
460V 1PH
50/60
+/- 10%
1840
4
12
cUR Recognized
CE
6-ft. cord with wire terminations
cUL Listed
CE
NEMA 5-20 plug on 6-ft. cord NEMA 6-15 plug on 6-ft. cord
Type 12 Standard
Basic Mechanical Thermostat
Behind Filter
80/27
61 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat RAL 7042 Gray Standard
34.37/873
12/305
9.88/251
105/48
34.37/873
12/305
9.88/251
105/48
GENESIS A/C
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
M33-0416-G010
34.37/873
12/305
9.88/251
125/57
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
79
McLean Cooling Technology: Air Conditioners
GENESIS®
GENESIS A/C
McLean Cooling Technology: Air Conditioners
GENESIS®
M33 Models 4000 BTU/Hr. (1172 Watt)
89044981
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
80
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data M36 Models 6000 BTU/Hr. (1760 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Subject to change without notice
M36-0626-G306
M36-0646-G400
5000/6000
1465/1760
R-407C
18/510
5000/6000
1465/1760
R-407C
18/510
5000/6000
1465/1760
R-407C
18/510
125/52
50/10
125/52
50/10
125/52
50/10
230/391
218/370
260/442
245/416
230/391
218/370
260/442
245/416
230/391
218/370
260/442
245/416
115
50/60
+/- 10%
1150
10
36.2
230
50/60
+/- 10%
1150
5
17.7
460V 1PH
50/60
+/- 10%
1288
2.8
9
cUR Recognized
CE
cUL Listed
CE
Others available upon request
NEMA 5-20 plug on 6-ft. cord NEMA 6-15 plug on 6-ft. cord
6-ft. cord with wire terminations
Type 12 Standard
Basic Mechanical Thermostat
Behind Filter
80/27
60 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat RAL 7042 Gray Standard
38.72/984
15/381
11.33/288
120/54
38.72/984
15/381
11.33/288
120/54
GENESIS A/C
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
M36-0616-G307
38.72/984
15/381
11.33/288
140/64
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
81
McLean Cooling Technology: Air Conditioners
GENESIS®
GENESIS A/C
McLean Cooling Technology: Air Conditioners
GENESIS®
M36 Models 6000 BTU/Hr. (1760 Watt)
89044982
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
82
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data M52-3 Phase Models 4100-10000 BTU/Hr. (1113-2930 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Subject to change without notice
M52-0646-G002
M52-0846-G002
M52-1046-G002
3800/4100
1113/1201
R-134A
14/397
5000/6000
1465/1760
R-134A
17/482
6500/7500
1905/2198
R-134A
13.5/382
8000/10000
2345/2930
R-134A
29/824
131/55
50/10
125/52
50/10
131/55
50/10
131/55
50/10
225/382
500/850
270/459
578/982
225/382
500/850
270/459
578/982
225/382
500/850
248/421
578/982
225/382
500/850
266/452
578/982
* 400/440/460 3~
* 400/440/460 3~
50/60
50/60
* Min./Max. +/- 10%
* Min./Max. +/- 10%
705.5/782
830/828
1.7
2.0/1.8
15.4
15.4
cUL Listed
CE
Others available upon request
Terminal Block
* 400/440/460 3~
* 400/440/460 3~
50/60
50/60
* Min./Max. +/- 10%
* Min./Max. +/- 10%
1453/1472
1536/1564
3.5/3.2
3.7/3.4
20
26
cUL Listed
CE
Others available upon request
Terminal Block
Type 12 Standard
Basic Mechanical Thermostat
Behind Filter
80/27
67dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat RAL 7042 Gray Standard
52.63/1337
17.13/435
11.33/288
162/74
52.63/1337
17.13/435
11.33/288
162/74
52.63/1337
17.13/435
11.33/288
162/74
GENESIS A/C
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
M52-0446-G002
52.63/1337
17.13/435
13.33/339
165/75
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
83
McLean Cooling Technology: Air Conditioners
GENESIS®
GENESIS A/C
McLean Cooling Technology: Air Conditioners
GENESIS®
M52-3 Phase Models 4100-10000 BTU/Hr. (1201-2930 Watt)
89044983
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
84
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Notes
GENESIS A/C
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
85
McLean Cooling Technology: Air Conditioners
GENESIS®
GENESIS A/C
McLean Cooling Technology: Air Conditioners
Product Overview GENESIS®
GENESIS®
Top-Mount Air Conditioner
MHB11 Model
86
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
The perfect cooling solution when
side-mount air conditioning is not an option
PRODUCT OVERVIEW
The perfect temperature control solution when you don’t have room to
hang a cooling unit on the side of your electrical enclosure.
GENESIS Chapter Contents
GENESIS® Top-Mount Air Conditioners . . 88
MHB11 Models 2200 BTU. . . . . . . . . . . . . . . . 89
MHB11 Models 4000 BTU . . . . . . . . . . . . . . . 90
APPLICATIONS
• Industrial drive enclosures
• Automotive assembly systems
• Material handling applications
• Other process control systems
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
87
GENESIS A/C
GENESIS® Top-Mount Air Conditioner
McLean Cooling Technology: Air Conditioners
ProductGENESIS®
Overview
GENESIS A/C
McLean Cooling Technology: Air Conditioners
GENESIS®
Top-Mount Air Conditioners
Industry Standards
UL/cUL Listed, CE, others available upon request
•• Type 12
Application
••
••
••
••
Industrial automation
ackage handling equipment
P
Security and defense systems
Ideal for use where there is little or no clearance around the
enclosure
Features
••
••
••
••
••
••
••
••
Robust reciprocating compressor
134a earth-friendly refrigerant and RoHS compliant
R
Models for 115, 230 and 460 single-phase AC volt power input
UL Listed or Recognized to save customers time and money with
agency approvals
Operating temperature range from 50 F/10 C to 125 F/52 C
Attractive industrial design with minimal use of visible fasteners
Reliable mechanical thermostat located behind the filter of the
unit. Indoor Air Conditioner models include digital display on
ambient side.
Low-carbon mild-steel sheet-metal cover for rugged factory
environments
88
Subject to change without notice
•• C
leanable, reusable aluminum mesh filter to protect coils for
maximum cooling performance
•• Mounting hardware, gaskets and user manual furnished with the
unit
•• Every unit functionally tested before shipping
•• Standard Indoor Air Conditioner models also include:
- Electro-Mechanical Thermostat
- Surge Suppressor
- Condensate Management System
Finish
•• R
AL 7042 gray powder-coat paint in a semi-gloss finish
•• Other colors and textures available
Options
•• T hermostat Malfunction Package
•• Special Voltage Package
* Consult the factory for availability and catalog number
Notes
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD
drawings into the overall design of your electronic system.
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data MHB11 Models 2200 BTU/Hr. (645 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
Subject to change without notice
MHB11-0226-G306
MHB11-0246-G400
2200/2200
645/645
R-134A
11/312
2200/2200
645/645
R-134A
11/312
2200/2200
645/645
R-134A
11/312
125/52
50/10
125/52
50/10
125/52
50/10
158/268
222/377
177/301
252/428
170/289
218/370
192/326
245/416
170/289
218/370
192/326
245/416
115
50/60
+/- 10%
1127/1035
9.8/9.0
28
220/230
50/60
+/- 10%
1210/1058
5.5/4.6
14.4
440/460V 1PH
50/60
+/- 10%
1320/1150
3.0/2.5
7.4
cUR Recognized
CE
cUL Listed
CE
Others available upon request
NEMA 5-15 plug
NEMA 6-15 plug
on 6-ft. cord
on 6-ft. cord
6-ft. cord with
wire terminations
Type 12 Standard
Basic Mechanical Thermostat
Behind Filter
80/27
62dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat RAL 7042 Gray Standard
10.25/260
17/432
21.08/535
90/41
10.25/260
17/432
21.08/535
90/41
GENESIS A/C
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
MHB11-0216-G306
10.25/260
17/432
21.08/535
110/50
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
89
McLean Cooling Technology: Air Conditioners
GENESIS®
GENESIS A/C
McLean Cooling Technology: Air Conditioners
GENESIS®
Performance Data MHB11 Models 4000 BTU/Hr. (1172 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
90
Subject to change without notice
MHB11-0416-G307
MHB11-0426-G306
MHB11-0446-G400
3300/4000
967/1172
R-134A
13/369
3300/4000
967/1172
R-134A
13/369
3300/4000
967/1172
R-134A
13/369
125/52
50/10
125/52
50/10
125/52
50/10
158/268
222/377
177/301
252/428
170/289
218/370
192/326
245/416
170/289
218/370
192/326
245/416
110/115
50/60
+/- 10%
1617/1564
14.7/13.6
48
220/230
50/60
+/- 10%
1760/1725
8.0/7.5
23
440/460V 1PH
50/60
+/- 10%
1936/1886
4.4/4.1
12
cUR Recognized
CE
cUL Listed
CE
Others available upon request
NEMA 5-20 plug
NEMA 6-15 plug
on 6-ft. cord
on 6-ft. cord
6-ft. cord with
wire terminations
Type 12 Standard
Basic Mechanical Thermostat
Behind Filter
80/27
62dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat RAL 7042 Gray Standard
10.25/260
17/432
21.08/535
108/49
10.25/260
17/432
21.08/535
108/49
10.25/260
17/432
21.08/535
128/58
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
MHB11 Models 2200-4000 BTU/Hr. (645-1172 Watt)
GENESIS A/C
89045044
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
91
McLean Cooling Technology: Air Conditioners
GENESIS®

McLean Cooling Technology: Air Conditioners: 
Product Overview

PROAIR™
Harsh Environment / Wash Down Air Conditioner
CR23
CR43st
CR23st
CR29
92
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products

: 
Product Overview

The ultimate in protective cooling for food
& beverage, wastewater & other applications
PROAIR™ Harsh Environment /
Wash Down Air Conditioner
PRODUCT OVERVIEW
Available in stainless steel and painted galvanized sheet metal options,
the PROAIR™ Air Conditioner is engineered tough to seal out highpressure hose water and withstand corrosive atmospheres.
PROAIR Harsh Environment/
Wash Down Chapter Contents
Harsh Environment / Wash Down 
Air Conditioners . . . . . . . . . . . . . . . . . . . . . . 94
CR23 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
CR29 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
CR43 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
APPLICATIONS
• Food and beverage process controls
• Wastewater treatment systems
• Other harsh environment applications
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
93
PROAIR A/C
McLean Cooling Technology: Air Conditioners
PROAIR™
McLean Cooling Technology
Air Conditioners
PROAIR™
Harsh Environment / Wash Down Air Conditioners
CR23
1600 BTU/Hr.
469 Watt
CR29
2200 and 4000 BTU/Hr.
645 and 1172 Watts
Industry Standards
UL/cUL Listed or UR/cUR Recognized, CE, others available
upon request
•• T ype 12/3R/4
•• Type 4X stainless steel option
Application
••
••
••
••
••
••
Industrial automation
ackage handling equipment
P
Food and beverage
Wastewater treatment
Security and defense systems
And more
•• R
obust reciprocating compressor
•• Maintenance made easy by front cover hinging open for quick
access to all components; condenser coil can be cleaned while unit
is still mounted to the cabinet
•• R134a or R407c earth-friendly refrigerant and RoHS compliant
•• Models for 115, 230 and 460 single phase AC volt power input
•• UL Listed or Recognized to save customers time and money with
agency approvals
•• Operating temperature range from -40 F/-40 C to 131 F/55 C (with
optional low-ambient package)
•• Attractive industrial design with minimal use of visible fasteners
•• Reliable mechanical thermostat located behind the filter of the
unit. Indoor Air Conditioner models include digital display on
ambient side.
•• Low-carbon mild-steel sheet-metal cover for rugged factory and
outdoor environments
Subject to change without notice
•• E asy-mount flanges for simple installation
•• Cleanable reusable aluminum mesh filter to protect coils for
maximum cooling performance
•• Mounting hardware, gaskets and user manual furnished with the
unit
•• Every unit functionally tested before shipping
•• High-performance fans and blowers designed for densely packed
enclosures
•• Standard Indoor Air Conditioner models also include:
- Electro-Mechanical Thermostat
- Surge Suppressor
Finish
Features
94
CR43
6000 & 8000 BTU/Hr.
1758 and 2344 Watts
•• A
NSI 70 gray powder-coat paint in a semi-gloss finish
•• Stainless Steel Type 304 or 316 finishes available on Type 4X models
•• Other colors and textures available
Options
••
••
••
••
••
••
T hermostat Malfunction Package
Special Voltage Package
Outdoor Package*
Harsh Environment Package*
Stainless Steel Package*
Heater Package*
* T-Series may be more appropriate. Refer to T-Series A/C chapter. Consult the factory for availability and catalog number.
Notes
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD
drawings into the overall design of your electronic system.
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data CR23 Models 1600 BTU/Hr. (469 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C) (Low Ambient Pkg)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption
(Watts at 50/60 Hz)
Max. Nominal Current
(Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CR23-0216-G002
CR23-0226-G002
CR23-0246-G400
1400/1600
410/469
R-134A
10/284
1400/1600
410/469
R-134A
10/284
1400/1600
410/469
R-134A
10/284
131/55
-40/-40
131/55
-40/-40
131/55
-40/-40
117/199
86/146
130/221
95/161
117/199
86/146
130/221
95/161
117/199
86/146
130/221
95/161
115
50/60
+/- 10%
471.5/517.5
230
50/60
+/- 10%
506
460V 1PH
50/60
+/- 10%
552
4.1/4.5
2.2
1.2
18
8.5
cUL Listed
CE
NEMA 5-15 plug on 6-ft. cord
NEMA 6-15 plug on 6-ft. cord
Type 12/3R Standard
4/4X Stainless Steel Optional
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
5
cUR Recognized
CE
6-ft. cord with wire terminations
Basic Mechanical Thermostat
Behind Cover
80/27
62 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Gray Standard
23/584
10/254
8.75/222
57/26
23/584
10/254
8.75/222
57/26
23/584
10/254
8.75/222
67/30
PROAIR A/C
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
95
McLean Cooling Technology: Air Conditioners
PROAIR™
PROAIR A/C
McLean Cooling Technology: Air Conditioners
PROAIR™
CR23 Models 1600 BTU/Hr. (469 Watt)
89045047
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
96
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
CR23 Models 1600 BTU/Hr. (469 Watt) With 4X Hood
89048648
PROAIR A/C
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
97
McLean Cooling Technology: Air Conditioners
PROAIR™
PROAIR A/C
McLean Cooling Technology: Air Conditioners
PROAIR™
Performance Data CR29 Models 2200-4000 BTU/Hr. (645-1172 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C) (Low Ambient
Pkg)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption
(Watts at 50/60 Hz)
Max. Nominal Current
(Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
CR29-0216-G002 CR29-0226-G002 CR29-0246-G400 CR29-0416-G002 CR29-0426-G002 CR29-0446-G400
2500/2700
732/791
R-134A
11/312
2500/2700
732/791
R-134A
11/312
3500/4000
1025/1172
R-134A
12/341
3500/4000
1025/1172
R-134A
12/341
3500/4000
1026/1172
R-134A
12/341
131/55
-40/-40
131/55
-40/-40
131/55
-40/-40
131/55
-40/-40
131/55
-40/-40
131/55
-40/-40
141/239
235/399
157/266
261/443
141/239
235/399
157/266
261/443
141/239
235/399
157/266
261/443
141/239
235/399
157/266
261/443
141/239
235/399
157/266
261/443
141/239
235/399
157/266
261/443
115
50/60
+/- 10%
851/517.5
230
50/60
+/- 10%
1058/877
460V 1PH
50/60
+/- 10%
1150/966
115
50/60
+/- 10%
1552.5
230
50/60
+/- 10%
1541/1518
460V 1PH
50/60
+/- 10%
1702/1656
7.4
4.6/3.9
2.5/2.1
13.5/13.5
6.7/6.6
3.7/3.6
7.4
cUR Recognized
CE
6-ft. cord
with wire
terminations
48
14.4
cUL Listed
CE
NEMA 5-15 plug NEMA 6-15 plug
on 6-ft. cord
on 6-ft. cord
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
98
2000/2200
586/645
R-134A
11/312
Subject to change without notice
28
23
cUL Listed
CE
NEMA 5-20 plug NEMA 6-15 plug
on 6-ft. cord
on 6-ft. cord
12
cUR Recognized
CE
6-ft. cord
with wire
terminations
Type 12/3R Standard
4/4X Stainless Steel Optional
Type 12/3R Standard
4/4X Stainless Steel Optional
Basic Mechanical Thermostat
Behind Cover
80/27
Basic Mechanical Thermostat
Behind Cover
80/27
68 dBA
68 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light-Gray Standard
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light-Gray Standard
29.5/749
15.75/400
8.63/219
98/44
29.5/749
15.75/400
8.63/219
98/44
29.5/749
15.75/400
8.63/219
108/49
29.5/749
15.75/400
8.63/219
118/54
29.5/749
15.75/400
8.63/219
118/54
29.5/749
15.75/400
8.63/219
128/58
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
CR29 Models 2200-4000 BTU/Hr. (645-1172 Watt)
89045048
PROAIR A/C
Cutout Instructions
@AF7,
# 63E:76>;@7ED7BD7E7@FAGFE;67A8
3;D5A@6;F;A@7D
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
99
McLean Cooling Technology: Air Conditioners
PROAIR™
PROAIR A/C
McLean Cooling Technology: Air Conditioners
PROAIR™
CR29 Models 2200-4000 BTU/Hr. (645-1172 Watt) With 4X Hood
89048649
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
100
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data CR43 Models 6000-8000 BTU/Hr. (1758-2344 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C) (Low Ambient
Pkg.)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption
(Watts at 50/60 Hz)
Max. Nominal Current
(Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Subject to change without notice
5500/6000
1611/1758
R-134A
19/538
5500/6000
1611/1758
R-134A
19/538
5500/6000
1611/1758
R-134A
19/538
7100/8000
2080/2344
R-134A
19/538
7100/8000
2080/2344
R-134A
19/538
7100/8000
2080/2344
R-134A
19/538
131/55
-40/-40
131/55
-40/-40
131/55
-40/-40
131/55
-40/-40
131/55
-40/-40
131/55
-40/-40
320/543
480/815
368/625
544/924
226/384
470/798
255/433
540/917
226/384
470/798
255/433
540/917
320/543
480/815
368/625
544/924
226/384
470/798
255/433
540/917
226/384
470/798
255/433
540/917
115
50/60
+/- 10%
1460
230
50/60
+/- 10%
1403/1518
460V 1PH
50/60
+/- 10%
1426/1564
115
50/60
+/- 10%
1460
230
50/60
+/- 10%
1403/1518
460V 1PH
50/60
+/- 10%
1426/1564
12.7
6.1/6.6
3.4/3.6
12.7
6.1/6.6
3.4/3.6
14
cUR Recognized
CE
48.3
48.3
27
cUL Listed
CE
Others available upon request
NEMA 5-20 plug NEMA 6-15 plug
on 6-ft. cord
on 6-ft. cord
6-ft. cord with
wire leads
27
cUL Listed
CE
Others available upon request
NEMA 5-20 plug NEMA 6-15 plug
on 6-ft. cord
on 6-ft. cord
14
cUR Recognized
CE
6-ft. cord with
wire leads
Type 12/3R Standard
4/4X Stainless Steel Optional
Type 12/3R Standard
4/4X Stainless Steel Optional
Basic Mechanical Thermostat
Enclosure Side on All Base Models
80/27
Basic Mechanical Thermostat
Enclosure Side on All Base Models
80/27
71 dBA
71 dBA
Galvanized Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
Galvanized Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
125/57
43.31/1100
15.75/400
10.25/260
125/57
155/70
125/57
43.31/1100
15.75/400
10.25/260
125/57
49.75/1263.62
15.75/400
10.25/260
155/70
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
101
PROAIR A/C
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
CR43-0616-G002 CR43-0626-G002 CR43-0646-G400 CR43-0816-G002 CR43-0826-G002 CR43-0846-G400
McLean Cooling Technology: Air Conditioners
PROAIR™
PROAIR A/C
McLean Cooling Technology: Air Conditioners
PROAIR™
CR43 Models 6000-8000 BTU/Hr. (1758-2344 Watt)
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
102
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
CR43 Models 6000-8000 BTU/Hr. (1758-2344 Watt) With 4X Hood
89048650
PROAIR A/C
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
103
McLean Cooling Technology: Air Conditioners
PROAIR™

McLean Cooling Technology: Air Conditioners: 
Product Overview

Water-Cooled
Air Conditioners
33WC Model
CR43WC Model
LB11WC Model
104
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products

: 
Product Overview

Effective electronics cooling for
hot, dirty and hostile environments
Water-Cooled Air Conditioners
Water-Cooled Chapter
Contents
PRODUCT OVERVIEW
Water-Cooled Air Conditioners . . . . . . . . 106
33WC Model. . . . . . . . . . . . . . . . . . . . . . . . . . . 107
CR43 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
LB11WC Model. . . . . . . . . . . . . . . . . . . . . . . . . 111
For highly effective temperature control when the electrical enclosure
is in a hot, dirty or hostile environment. Requires chilled water at the
enclosure.
APPLICATIONS
• High-temperature environments
• Extremely dusty and dirty conditions
• Other demanding applications
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
105
Water Cool A/C
McLean Cooling Technology: Air Conditioners
Water Cooled
McLean Cooling Technology
Air Conditioners
Water Cooled
Water-Cooled Air Conditioners
33WC
4000 BTU/Hr.
(1172 Watt) Models
Industry Standards
UL/cUL Listed or UR/cUR Recognized, CE, others available
upon request
•• T ype 12 on 33 water-cooled models
•• Type 4/4X stainless steel option on CR water cooled models
Application
••
••
••
••
••
••
••
Industrial automation
ackage handling equipment
P
Food and beverage
Wastewater treatment
Security and defense systems
Pulp and paper
And more
••
••
••
••
Finish
Robust reciprocating compressor
134a earth-friendly refrigerant and RoHS compliant
R
Models for 115 and 230 AC volt power input
UL Listed or Recognized to save customers time and money with
agency approvals
Operating temperature range from 50 F/10 C to 125 F/52 C
Attractive industrial design with minimal use of visible fasteners
Reliable mechanical thermostat located behind the front panel of
the unit
Low-carbon mild-steel sheet-metal cover for rugged factory and
outdoor environments
106
Subject to change without notice
•• E asy-mount flanges for simple installation
•• Mounting hardware, gaskets and user manual furnished with the
unit
•• Every unit functionally tested before shipping
•• Heat is removed from the system by means of the water cooling
the refrigerant. No external air movers or condenser coils to get
clogged.
•• Maximum water usage of 2 GPM at 90 F water intake temperature
•• Standard Indoor Air Conditioner models also include:
- Electro-Mechanical Thermostat
- Surge Suppressor
•• A
NSI 70 gray powder-coat paint in a semi-gloss finish
•• Stainless steel Type 304 or 316 finishes available on Type 4X models
•• Other colors and textures available
Features
••
••
••
••
LB11WC
4000 BTU/Hr.
(1172 Watt) Models
CR43WC
8000 BTU/Hr.
(2345 Watt) Models
Options
••
••
••
••
••
T hermostat Malfunction Package
Special Voltage Package
Active Condensate Evaporator Package
Harsh Environment Package*
Stainless Steel Package*
* Consult the factory for availability and catalog number.
Notes
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD
drawings into the overall design of your electronic system.
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data 33WC Models 4000 BTU/Hr. (1172 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
33-0416-GW010
33-0426-GW014
33-0426-GW012
3800/4000
1113/1172
R-134A
7/198
3800/4000
1113/1172
R-134A
7/198
3800/4000
1113/1172
R-134A
7/198
125/52
50/10
125/52
50/10
125/52
50/10
135/229
WATERFLOW: 0.5 GPM @ 90 F
145/246
WATERFLOW: 0.5 GPM @ 90 F
100/170
WATERFLOW: 0.5 GPM @ 90 F
110/187
WATERFLOW: 0.5 GPM @ 90 F
100/170
WATERFLOW: 0.5 GPM @ 90 F
110/187
WATERFLOW: 0.5 GPM @ 90 F
115
50/60
+/- 10%
600/667
6.0/5.8
28
cUL Listed
CE
NEMA 5-15 plug on 6-ft. cord
220/230
50/60
+/- 10%
726/736
3.3/3.2
14.4
cUL Listed
CE
NEMA 6-15 plug on 6-ft. cord
460V 1PH
50/60
+/- 10%
828/782
1.8/1.7
7.4
cUR Recognized
CE
6-ft. cord with wire terminations
Type 12 Standard
Basic Mechanical Thermostat
Behind Front cover
80/27
61 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat RAL 7042 Gray Standard
34.13/867
12.38/314
8.75/222
86/39
34.13/867
12.38/314
8.75/222
86/39
38.63/981.2
12.38/314
8.75/222
106/48
Water Cool A/C
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
107
McLean Cooling Technology: Air Conditioners
Water Cooled
Water Cool A/C
McLean Cooling Technology: Air Conditioners
Water Cooled
33WC Models 4000 BTU/Hr. (1172 Watt)
89045090
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
108
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data CR43WC Models 8000 BTU/Hr. (2345 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
CR43-0816-GW0XX
CR43-0826-GW0XX
8500
2490
R-134A
12/341
8500
2490
R-134A
12/341
131/55
50/10
131/55
50/10
135/229
WATERFLOW: 1.5 GPM @ 90 F
145/246
WATERFLOW: 1.5 GPM @ 90 F
100/170
WATERFLOW: 1.5 GPM @ 90 F
110/187
WATERFLOW: 1.5 GPM @ 90 F
115
50/60
+/- 10%
1518/1495
13.2/13
48.3
Not listed
230
50/60
+/- 10%
1518/1495
6.6/6.5
27
cUL Listed
CE
NEMA 6-15 plug on 6-ft. cord
NEMA 5-15 plug on 6-ft. cord
Type 4 Standard
Basic Mechanical Thermostat
Behind Front Cover
80/27
61 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat RAL 7042 Gray Standard
43/1092
15.75/400
10.9/279
86/39
Water Cool A/C
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
109
McLean Cooling Technology: Air Conditioners
Water Cooled
Water Cool A/C
McLean Cooling Technology: Air Conditioners
Water Cooled
CR43WC Models 8000 BTU/Hr. (2345 Watt)
89045091
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
110
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data LB11WC Models 4000 BTU/Hr. (1172 Watt)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
BTUs/Hr.
Watts
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Starting Current (Amps)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
CONTROLLER
Description
Thermostat Location
Factory Thermostat Setting (°F/°C)
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
LB11-0416-GW008
LB11-0426-GW010
3900/4000
1142/1172
R-134A
12/340
3900/4000
1142/1172
R-134A
12/340
125/52
50/10
125/52
50/10
135/229
WATERFLOW: 1.0 GPM @ 90 F
145/246
WATERFLOW: 1.0 GPM @ 90 F
100/170
WATERFLOW: 1.0 GPM @ 90 F
110/187
WATERFLOW: 1.0 GPM @ 90 F
115
50/60
+/- 10%
885.5/828
7.7/7.2
28
Not listed
230
50/60
+/- 10%
897/792
3.9/3.6
14.4
cUL Listed
CE
NEMA 6-15 plug on 6-ft. cord
NEMA 5-15 plug on 6-ft. cord
Type 12 Standard
Basic Mechanical Thermostat
Behind Front cover
80/27
61 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat RAL 7042 Gray Standard
10.47/266
19/483
19.63/499
110/50
10.47/266
19/483
19.63/499
110/50
Water Cool A/C
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
111
McLean Cooling Technology: Air Conditioners
Water Cooled
Water Cool A/C
McLean Cooling Technology: Air Conditioners
Water Cooled
LB11WC Models 4000 BTU/Hr. (1172 Watt)
89045092
Cutout Instructions
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
112
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Notes
Water Cool A/C
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
113
McLean Cooling Technology: Air Conditioners
Water Cooled

McLean Cooling Technology: Air-To-Air Heat Exchangers: 
Product Overview

PROAIR™
Indoor Heat Exchangers
ZR29-18 Model
XR20 Model
XR47-24 Model
XR60-84 Model
114
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products

: 
Product Overview

Time-proven reliability and
low-maintenance design for trouble-free cooling
PROAIR™ Indoor Heat Exchangers
PROAIR Indoor Heat
Exchanger Chapter Contents
PRODUCT OVERVIEW
Indoor Heat Exchangers . . . . . . . . . . . . . . . 116
XR20 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
XR29-08 Model. . . . . . . . . . . . . . . . . . . . . . . . 119
XR29-18 Model . . . . . . . . . . . . . . . . . . . . . . . . 121
XR47-24 Model. . . . . . . . . . . . . . . . . . . . . . . . . 123
XR47-35 Model . . . . . . . . . . . . . . . . . . . . . . . . 125
XR60-55 Model. . . . . . . . . . . . . . . . . . . . . . . . 127
XR60-84 Model. . . . . . . . . . . . . . . . . . . . . . . . 129
Keep your industrial process control equipment cool with this highly
reliable Type 12 heat exchanger built for low-maintenance operation.
Every unit is able to operate without a filter.
APPLICATIONS
• Industrial drive enclosures
• Automotive assembly systems
• Material handling applications
• Other process control systems
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
115
PROAIR HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
McLean Cooling Technology
Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
Indoor Heat Exchangers
XR20
Models
4 W/°F (7 W/°C)
XR29-08
Models
8 W/°F (14 W/°C)
XR29-18
Models
18 W/°F (32 W/°C)
XR47-24
Models
24 W/°F (43 W/°C)
Industry Standards
XR60-84
Models
84 W/°F (151 W/°C)
Options
UL/cUL Listed or UR/cUR Recognized, CE, others available
upon request
•• T ype 12 on XR20 and XR29-08 models
•• Type 3R on XR29-18 and larger models when surface mounted
vertically on an enclosure
Application
••
••
••
••
XR47-35
XR60-55
Models
Models
35 W/°F (63 W/°C) 55 W/°F (99 W/°C)
••
••
••
••
S pecial Voltage Package
Outdoor Package*
Harsh Environment Package*
Stainless Steel Package*
* CLIMAGUARD™ may be more appropriate. Refer to
CLIMAGUARD HEX chapter. Consult the factory for availability
and catalog number.
Notes
Industrial automation
ackage handling equipment
P
Security and defense systems
And more
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD
drawings into the overall design of your electronic system
Features
•• U
nique counterflow aluminum core for high-efficiency and highperformance heat transfer, except for the XR20 and XR29-08 which
use a modified heat pipe core
•• Models for 115 and 230 AC volt power input
•• UL Listed or Recognized to save customers time and money with
agency approvals
•• Operating temperature range from -20 F/-29 C to 140 F/60 C
•• Streamlined aesthetics with no visible mounting rails. Slim design
allows for mounting to narrow or shallow enclosures.
•• Reliable top-quality bearing fans and impellers make these units
run quietly and with increased reliability
•• Low-carbon mild-steel sheet-metal cover for rugged factory
environments
•• Easy-mount flanges for simple installation
•• Mounting hardware, gaskets and user manual furnished with the
unit
•• Every unit functionally tested before shipping
•• Filterless design for low maintenance and easy cleaning
•• Four fasteners allow simple removal of front cover for easy access
Finish
•• A
NSI 70 gray powder-coat paint in a semi-gloss finish
•• Stainless steel Type 304 or 316 finishes available on Type 4X models
•• Other colors and textures available
116
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data XR20 Models 4 W/°F (7 W/°C)
MODEL NUMBER
Power Input Description
ENCLOSURE PROTECTION
UL Type
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
Subject to change without notice
XR20-0216-012
XR20-0226-012
4
7
R-134A
4/113
4
7
R-134A
4/113
140/60
-20/-29
140/60
-20/-29
71/121
75/127
74/126
78/132
71/121
75/127
74/126
78/132
115
50/60
+/- 10%
69
0.6
230
50/60
+/- 10%
69
0.3
NEMA 5-15 plug on 6-ft. cord
cUL Listed
CE
PROAIR HEX
COOLING PERFORMANCE
Nominal:
Watts per °F
Watts per °C
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Agency Approvals
NEMA 6-15 plug on 6-ft. cord
Type 12 Standard
56 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
20/508
7.5/190.5
3/76.2
12/5.4
20/508
7.5/190.5
3/76.2
12/5.4
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
117
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
PROAIR HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
XR20 Models 4 W/°F (7 W/°C)
(QFORVXUH
$LU,Q
$PELHQW
$LU2XW
6HH'HWDLO$
$PELHQW
$LU,Q
(QFORVXUH
$LU2XW
)URQW9LHZ
6LGH9LHZ
%DFN9LHZ
89045123
81&
'HWDLO$
1RWH
6XSSOLHGZLWKPRXQWLQJJDVNHWNLW
6HUYLFHFRUGWHUPLQDWHGZLWKDSSURSULDWHSOXJ
1(0$3IRU9XQLWV
1(0$3IRU9XQLWV
'HWDFKDEOHDLUIORZSOHQXPPD\EHXVHGZKHQ
PRXQWLQJWKHKHDWH[FKDQJHULQVLGHRURXWVLGH
RIWKHHQFORVUH
R
&XWRXW,QVWUXFWLRQV
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
118
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data XR29 Models 8 W/°F (14 W/°C)
MODEL NUMBER
Power Input Description
ENCLOSURE PROTECTION
UL Type
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
Subject to change without notice
XR29-0816-012
XR29-0826-012
8
14
R-134A
5.5/156
8
14
R-134A
5.5/156
140/60
-20/-29
140/60
-20/-29
71/121
75/127
74/126
78/132
71/121
75/127
74/126
78/132
115
50/60
+/- 10%
69
0.6
230
50/60
+/- 10%
69
0.3
NEMA 5-15 plug on 6-ft. cord
cUL Listed
CE
PROAIR HEX
COOLING PERFORMANCE
Nominal:
Watts per °F
Watts per °C
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Agency Approvals
NEMA 6-15 plug on 6-ft. cord
Type 12 Standard
56 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
29.5/749.3
10/254
3.09/78.5
21/9.5
29.5/749.3
10/254
3.09/78.5
21/9.5
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
119
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
PROAIR HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
XR29 Models 8 W/°F (14 W/°C)
'HWDLO$
$PELHQW
$LU,Q
(QFORVXUH
$LU2XW
)URQW9LHZ
6HH'HWDLO$
(QFORVXUH
$LU,Q
$PELHQW
$LU2XW
6LGH9LHZ
1RWH
6XSSOLHGZLWKPRXQWLQJJDVNHWNLW
6HUYLFHFRUGWHUPLQDWHGZLWKDSSURSULDWHSOXJ
1(0$3IRU9XQLWV
1(0$3IRU9XQLWV
'HWDFKDEOHDLUIORZSOHQXPPD\EHXVHGZKHQ
PRXQWLQJWKHKHDWH[FKDQJHULQVLGHRURXWVLGH
RIWKHHQFORVUH
%DFN9LHZ
89045124
81&
R
&XWRXW,QVWUXFWLRQV
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
120
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data XR29 Models 18 W/°F (32 W/°C)
MODEL NUMBER
Power Input Description
ENCLOSURE PROTECTION
UL Type
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
Subject to change without notice
XR29-1816-012
XR29-1826-012
18
32
N/A
N/A
18
32
N/A
N/A
140/60
-20/-29
140/60
-20/-29
126/214
120/204
140/237
133/226
126/214
120/204
140/237
133/226
115
50/60
+/- 10%
207
1.8
230
50/60
+/- 10%
207
0.9
NEMA 5-15 plug on 6-ft. cord
cUL Listed
CE
PROAIR HEX
COOLING PERFORMANCE
Nominal:
Watts per °F
Watts per °C
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Agency Approvals
NEMA 6-15 plug on 6-ft. cord
Type 12 Standard
64 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
29.66/753.4
10.24/260.1
5.92/150.4
32/15
29.66/753.4
10.24/260.1
5.92/150.4
32/15
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
121
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
PROAIR HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
0RXQWLQJ+DUGZDUH
XR29 Models 18 W/°F (32 W/°C)
(QFORVXUH
$LU,Q
,(&&
3RZHU,QOHW
$PELHQW
$LU2XW
(QFORVXUH
$LU2XW
$PELHQW
$LU,Q
89045125
)URQW9LHZ
%DFN9LHZ
6LGH9LHZ
R
R
7<3
&XWRXW,QVWUXFWLRQV
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
122
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data XR47 Models 24 W/°F (43 W/°C)
MODEL NUMBER
Power Input Description
ENCLOSURE PROTECTION
UL Type
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
Subject to change without notice
XR47-2416-012
XR47-2426-012
24
43
N/A
N/A
24
43
N/A
N/A
140/60
-20/-29
140/60
-20/-29
140/238
118/200
156/265
131/222
140/238
118/200
156/265
131/222
115
50/60
+/- 10%
207
1.8
230
50/60
+/- 10%
207
0.9
NEMA 5-15 plug on 6-ft. cord
cUL Listed
CE
PROAIR HEX
COOLING PERFORMANCE
Nominal:
Watts per °F
Watts per °C
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Agency Approvals
NEMA 6-15 plug on 6-ft. cord
Type 12 Standard
68 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
47.16/1197.9
10.24/260.1
5.92/150.4
51/23
47.16/1197.9
10.24/260.1
5.92/150.4
51/23
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
123
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
PROAIR HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
0RXQWLQJ+DUGZDUH
XR47 Models 24 W/°F (43 W/°C)
(QFORVXUH
$LU,Q
,(&&
3RZHU,QOHW
$PELHQW
$LU2XW
(QFORVXUH
$LU2XW
$PELHQW
$LU,Q
89045126
)URQW9LHZ
%DFN9LHZ
6LGH9LHZ
2
&XWRXW,QVWUXFWLRQV
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
124
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data XR47 Models 35 W/°F (63 W/°C)
MODEL NUMBER
Power Input Description
ENCLOSURE PROTECTION
UL Type
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
Subject to change without notice
XR47-3516-012
XR47-3526-012
35
63
N/A
N/A
35
63
N/A
N/A
140/60
-20/-29
140/60
-20/-29
120/204
131/222
133/226
146/248
120/204
131/222
133/226
146/248
115
50/60
+/- 10%
207
1.8
230
50/60
+/- 10%
207
0.9
NEMA 5-15 plug on 6-ft. cord
cUL Listed
CE
PROAIR HEX
COOLING PERFORMANCE
Nominal:
Watts per °F
Watts per °C
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Agency Approvals
NEMA 6-15 plug on 6-ft. cord
Type 12 Standard
68 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
47.16/1197.9
15.24/387.1
5.92/150.4
59/27
47.16/1197.9
15.24/387.1
5.92/150.4
59/27
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
125
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
PROAIR HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
XR47 Models 35 W/°F (63 W/°C)
0RXQWLQJ+DUGZDUH
(QFORVXUH
$LU,Q
,(&
3RZHU,QOHW
$PELHQW
$LU2XW
(QFORVXUH
$LU2XW
$PELHQW
$LU,Q
89045127
)URQW9LHZ
6LGH9LHZ
%DFN9LHZ
1RWH
6XSSOLHGZLWKPRXQWLQJJDVNHWNLWQRWVKRZQ
PHWHUORQJVHUYLFHFRUGVXSSOLHGZLWK
DSSURSULDWHSOXJ
1(0$3IRU9XQLWV
1(0$3IRU9XQLWV
R
&XWRXW,QVWUXFWLRQV
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
126
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data XR60 Models 55 W/°F (99 W/°C)
MODEL NUMBER
Power Input Description
ENCLOSURE PROTECTION
UL Type
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
Subject to change without notice
XR60-5516-012
XR60-5526-012
55
99
N/A
N/A
55
99
N/A
N/A
140/60
-20/-29
140/60
-20/-29
398/676
429/729
442/751
477/810
398/676
429/729
442/751
477/810
115
50/60
+/- 10%
759
6.6
230
50/60
+/- 10%
759
3.3
NEMA 5-15 plug on 6-ft. cord
cUL Listed
CE
PROAIR HEX
COOLING PERFORMANCE
Nominal:
Watts per °F
Watts per °C
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Agency Approvals
NEMA 6-15 plug on 6-ft. cord
Type 12 Standard
73 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
59.66/1515.4
15.24/387.1
5.92/150.4
86/39
59.66/1515.4
15.24/387.1
5.92/150.4
86/39
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
127
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
PROAIR HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
0RXQWLQJ+DUGZDUH
XR60 Models 55 W/°F (99 W/°C)
(QFORVXUH
$LU,Q
,(&
3RZHU,QOHW
$PELHQW
$LU2XW
(QFORVXUH
$LU2XW
$PELHQW
$LU,Q
89045128
)URQW9LHZ
6LGH9LHZ
%DFN9LHZ
1RWH
6XSSOLHGZLWKPRXQWLQJJDVNHWNLWQRWVKRZQ
PHWHUORQJVHUYLFHFRUGVXSSOLHGZLWK
DSSURSULDWHSOXJ
1(0$3IRU9XQLWV
1(0$3IRU9XQLWV
2 &XWRXW,QVWUXFWLRQV
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
128
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data XR60 Models 84 W/°F (151 W/°C)
MODEL NUMBER
Power Input Description
ENCLOSURE PROTECTION
UL Type
SOUND LEVEL
At 1.5 Meters
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
Subject to change without notice
XR60-8416-012
XR60-8426-012
84
151
N/A
N/A
84
151
N/A
N/A
140/60
-20/-29
140/60
-20/-29
497/844
434/737
552/938
482/819
497/844
434/737
552/938
482/819
115
50/60
+/- 10%
759
6.6
230
50/60
+/- 10%
759
3.3
NEMA 5-15 plug on 6-ft. cord
cUL Listed
CE
PROAIR HEX
COOLING PERFORMANCE
Nominal:
Watts per °F
Watts per °C
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Agency Approvals
NEMA 6-15 plug on 6-ft. cord
Type 12 Standard
73 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
59.66/1515.4
15.24/387.1
9.92/252
106/48
59.66/1515.4
15.24/387.1
9.92/252
106/48
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
129
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
PROAIR HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers
XR60 Models 84 W/°F (151 W/°C)
0RXQWLQJ+DUGZDUH
(QFORVXUH
$LU,Q
,(&
3RZHU,QOHW
$PELHQW
$LU2XW
(QFORVXUH
$LU2XW
$PELHQW
$LU,Q
89045129
)URQW9LHZ
6LGH9LHZ
%DFN9LHZ
1RWH
6XSSOLHGZLWKPRXQWLQJJDVNHWNLWQRWVKRZQ
PHWHUORQJVHUYLFHFRUGVXSSOLHGZLWK
DSSURSULDWHSOXJ
1(0$3IRU9XQLWV
1(0$3IRU9XQLWV
2 &XWRXW,QVWUXFWLRQV
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
130
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Notes
PROAIR HEX
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
131
McLean Cooling Technology: Air-To-Air Heat Exchangers
PROAIR™ Indoor Heat Exchangers

McLean Cooling Technology: Air-To-Air Heat Exchangers: 
Product Overview

CLIMAGUARD™
Outdoor Heat Exchangers
TX23 Model
TX38 Model
TX52 Model
132
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products

: 
Product Overview

Lab- and field-tested
to seal out extreme weather
CLIMAGUARD™ Outdoor Heat
Exchangers
PRODUCT OVERVIEW
Put this Type 4 / Telcordia GR-487-capable heat exchanger to the test.
You’ll find that every unit keeps your outdoor enclosure sealed tight for
reliable closed-loop cooling. Works on AC or DC voltage power input.
CLIMAGUARD™ Outdoor Heat
Exchanger Chapter Contents
Outdoor Heat Exchangers . . . . . . . . . . . . . 134
TX23 Indoor Model. . . . . . . . . . . . . . . . . . . . 135
TX33 Indoor Model. . . . . . . . . . . . . . . . . . . . 138
TX38 Outdoor Model . . . . . . . . . . . . . . . . . . 141
TX52 Outdoor Model . . . . . . . . . . . . . . . . . . 144
APPLICATIONS
• Telecommunications cabinets
• Alternative energy
• Outside plant applications
• Other outdoor electronic systems
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
133
CLIMAGUARD HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger
McLean Cooling Technology
Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger
Outdoor Heat Exchangers
TX23
Models
14 W/°F (25 W/°C)
TX33
Models
28 W/°F (50 W/°C)
Industry Standards
UL/cUL Listed or UR/cUR Recognized, CE, others available
upon request
•• T elcordia GR-487 capable
•• Type 12/3R/4 Standard
•• Type 4X stainless steel option available
TX38
Models
56 W/°F (100 W/°C)
TX52
Models
83 W/°F (150 W/°C)
•• E asy-mount flanges for simple installation
•• Mounting hardware, gaskets and user manual furnished with the
unit
•• Every unit functionally tested before shipping
•• Filterless design for low maintenance and easy cleaning
•• Engineered for temperature extremes, corrosive environments and
wind driven rain
Application
Finish
••
••
••
••
••
•• A
NSI 70 gray powder-coat paint in a semi-gloss finish
•• Stainless steel Type 304 or 316 finishes available on Type 4X models
•• Other colors and textures available
T elecom shelters
Outdoor cabinets
Equipment buildings
Instrument enclosures
And more
Options
Features
•• U
nique counterflow aluminum core for high efficiency and high
performance heat transfer
•• Models for 24 VDC, 48 VDC, 115 VAC and 230 VAC power supplies
•• UL Listed or Recognized to save customers time and money with
agency approvals
•• Operating temperature range from -40 F/-40 C to 149 F/65 C
•• Variable speed blowers standard on DC powered units for quiet
running
•• Surface or recessed mount capable
•• Low-carbon mild-steel sheet-metal cover for rugged factory
environments
134
Subject to change without notice
••
••
••
••
••
••
T hermostat Package
Special Voltage Package
Outdoor Package
Harsh Environment Package*
Stainless Steel Package*
Heater Package*
* Consult the factory for availability and catalog number.
Notes
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD
drawings into the overall design of your electronic system
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data TX23 Models 14 W/°F (25 W/°C)
MODEL NUMBER
Power Input Description
ENCLOSURE PROTECTION
UL Type
SOUND LEVEL
At 1.5 M
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
Subject to change without notice
TX23-1416-100
TX23-1426-100
TX23-1424-100
TX23-1448-100
14
25
N/A
N/A
14
25
N/A
N/A
14
25
N/A
N/A
14
25
N/A
N/A
149/65
-40/-40
149/65
-40/-40
149/65
-40/-40
149/65
-40/-40
69/117
58/98
84/142
69/117
69/117
58/98
84/142
69/117
N/A
N/A
175/268
158/297
N/A
N/A
175/268
158/297
115 VAC
50/60
+/- 10%
69
0.6
230 VAC
50/60
+/- 10%
23
0.1
24 VDC
50/60
+/- 10%
82
3.4
48 VDC
50/60
+/- 10%
87
1.8
cUL Listed
CE
NEMA 5-15 plug
NEMA 6-15 plug
on 6-ft. cord
on 6-ft. cord
cUL Listed
CE
Terminal Block
Terminal Block
Type 12/3R/4 Standard
4X Optional
Type 12/3R/4 Standard
4X Optional
56 dBA
56 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
23/584.2
12/304.8
7.1/180.3
30/13.6
23/584.2
12/304.8
7.1/180.3
30/13.6
23/584.2
12/304.8
7.1/180.3
30/13.6
23/584.2
12/304.8
7.1/180.3
30/13.6
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
135
CLIMAGUARD HEX
COOLING PERFORMANCE
Nominal:
Watts per °F
Watts per °C
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Agency Approvals
McLean Cooling Technology: Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger
CLIMAGUARD HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger
TX23 DC Models 14 W/°F (25 W/°C)
89045164
MOUNTING HARDWARE FOR INTERNALLY MOUNTED.
MOUNTING IS BEHIND REMOVABLE FRONT COVER.
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
136
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
TX23 AC Models 14 W/°F (25 W/°C)
CLIMAGUARD HEX
89045165
MOUNTING HARDWARE FOR INTERNALLY MOUNTED.
MOUNTING IS BEHIND REMOVABLE FRONT COVER.
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
137
McLean Cooling Technology: Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger
CLIMAGUARD HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger
Performance Data TX33 Models 28 W/°F (50 W/°C)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
Watts per °F
Watts per °C
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
SOUND LEVEL
At 1.5 M
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
138
Subject to change without notice
TX33-2816-100
TX33-2826-100
TX33-2824-100
TX33-2848-100
28
50
N/A
N/A
28
50
N/A
N/A
28
50
N/A
N/A
28
50
N/A
N/A
149/65
-40/-40
149/65
-40/-40
149/65
-40/-40
149/65
-40/-40
212/360
238/404
228/387
263/447
212/360
238/404
228/387
263/447
N/A
N/A
228/387
166/282
N/A
N/A
228/387
166/282
115 VAC
50/60
+/- 10%
161
1.4
230 VAC
50/60
+/- 10%
92
0.4
24 VDC
50/60
+/- 10%
82
3.4
48 VDC
50/60
+/- 10%
87
1.8
cUL Listed
CE
NEMA 5-15 plug
NEMA 6-15 plug
on 6-ft. cord
on 6-ft. cord
cUL Listed
CE
Terminal Block
Terminal Block
Type 12/3R/4 Standard
4X Optional
Type 12/3R/4 Standard
4X Optional
56 dBA
56 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
33/838.2
15.7/398.8
8.1/205.7
45/20.4
33/838.2
15.7/398.8
8.1/205.7
45/20.4
33/838.2
15.7/398.8
8.1/205.7
45/20.4
33/838.2
15.7/398.8
8.1/205.7
45/20.4
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
TX33 DC Models 28 W/°F (50 W/°C)
CLIMAGUARD HEX
89045166
MOUNTING HARDWARE FOR INTERNALLY MOUNTED.
MOUNTING IS BEHIND REMOVABLE FRONT COVER.
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
139
McLean Cooling Technology: Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger
CLIMAGUARD HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger
TX33 AC Models 28 W/°F (50 W/°C)
89045167
MOUNTING HARDWARE FOR INTERNALLY MOUNTED.
MOUNTING IS BEHIND REMOVABLE FRONT COVER.
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
140
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Performance Data TX38 Models 56 W/°F (100 W/°C)
MODEL NUMBER
Power Input Description
ENCLOSURE PROTECTION
UL Type
SOUND LEVEL
At 1.5 M
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
Subject to change without notice
TX38-5616-100
TX38-5626-100
TX38-5624-100
TX38-5648-100
56
100
N/A
N/A
56
100
N/A
N/A
56
100
N/A
N/A
56
100
N/A
N/A
149/65
-40/-40
149/65
-40/-40
149/65
-40/-40
149/65
-40/-40
425/722
461/738
477/810
517/878
425/722
461/738
477/810
517/878
N/A
N/A
368/625
422/717
N/A
N/A
368/625
422/717
115 VAC
50/60
+/- 10%
368
2.3/3.2
230 VAC
50/60
+/- 10%
276
0.7/1.2
24 VDC
50/60
+/- 10%
207
8.6
48 VDC
50/60
+/- 10%
279
5.8
cUL Listed
CE
NEMA 5-15 plug
NEMA 6-15 plug
on 6-ft. cord
on 6-ft. cord
cUL Listed
CE
Terminal Block
Terminal Block
Type 12/3R/4 Standard
4X Optional
Type 12/3R/4 Standard
4X Optional
64 dBA
64 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
38/965.2
19.7/500.4
10.1/256.5
66/30
38/965.2
19.7/500.4
10.1/256.5
66/30
38/965.2
19.7/500.4
10.1/256.5
66/30
38/965.2
19.7/500.4
10.1/256.5
66/30
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
141
CLIMAGUARD HEX
COOLING PERFORMANCE
Nominal:
Watts per °F
Watts per °C
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Agency Approvals
McLean Cooling Technology: Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger
CLIMAGUARD HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger
TX38 DC Models 56 W/°F (100 W/°C)
MOUNTING HARDWARE FOR INTERNALLY MOUNTED.
MOUNTING IS BEHIND REMOVABLE FRONT COVER.
89045171
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
142
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
TX38 AC Models 56 W/°F (100 W/°C)
CLIMAGUARD HEX
89045172
MOUNTING HARDWARE FOR INTERNALLY MOUNTED.
MOUNTING IS BEHIND REMOVABLE FRONT COVER.
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
143
McLean Cooling Technology: Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger
CLIMAGUARD HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger
Performance Data TX52 Models 83 W/°F (150 W/°C)
MODEL NUMBER
COOLING PERFORMANCE
Nominal:
Watts per °F
Watts per °C
Refrigerant
Refrigerant Charge (ounces/grams)
Operating Temperature Range:
Maximum (°F/°C)
Minimum (°F/°C)
Air Flow at 0 Static Pressure:
Internal loop 50 Hz (CFM/M3/Hr.)
External loop 50 Hz (CFM/M3/Hr.)
Internal loop 60 Hz (CFM/M3/Hr.)
External loop 60 Hz (CFM/M3/Hr.)
ELECTRICAL DATA
Rated Voltage
Frequency (Hz)
Operating Range
Max. Power Consumption (Watts at 50/60 Hz)
Max. Nominal Current (Amps at 50/60 Hz)
Agency Approvals
Power Input Description
ENCLOSURE PROTECTION
UL Type
SOUND LEVEL
At 1.5 M
UNIT CONSTRUCTION
Material
Finish
UNIT DIMENSIONS
Height (in./mm)
Width (in./mm)
Depth (in./mm)
Weight (lb./kg)
144
Subject to change without notice
TX52-8316-100
TX52-8326-100
TX52-8324-100
TX52-8348-100
83
150
N/A
N/A
83
150
N/A
N/A
83
150
N/A
N/A
83
150
N/A
N/A
149/65
-40/-40
149/65
-40/-40
149/65
-40/-40
149/65
-40/-40
495/841
540/917
533/905
605/1028
495/841
540/917
533/905
605/1028
N/A
N/A
466/792
547/929
N/A
N/A
466/792
547/929
115 VAC
50/60
+/- 10%
782
4.3/6.7
230 VAC
50/60
+/- 10%
771
2.2/3.4
24 VDC
50/60
+/- 10%
507
21.1
48 VDC
50/60
+/- 10%
375
7.8
cUL Listed
CE
NEMA 5-15 plug
NEMA 6-15 plug
on 6-ft. cord
on 6-ft. cord
cUL Listed
CE
Terminal Block
Terminal Block
Type 12/3R/4 Standard
4X Optional
Type 12/3R/4 Standard
4X Optional
68 dBA
68 dBA
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
Mild Steel Sheet Metal Standard
Stainless Steel Optional
Powder Coat ANSI 70 Light Gray Standard
52/1320.8
19.7/500.4
10.1/256.5
100/45.3
52/1320.8
19.7/500.4
10.1/256.5
100/45.3
52/1320.8
19.7/500.4
10.1/256.5
100/45.3
52/1320.8
19.7/500.4
10.1/256.5
100/45.3
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
TX52 DC Models 83 W/°F (150 W/°C)
CLIMAGUARD HEX
89045173
MOUNTING HARDWARE FOR INTERNALLY MOUNTED.
MOUNTING IS BEHIND REMOVABLE FRONT COVER.
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
145
McLean Cooling Technology: Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger
CLIMAGUARD HEX
McLean Cooling Technology: Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger
TX52 AC Models 83 W/°F (150 W/°C)
MOUNTING HARDWARE FOR INTERNALLY MOUNTED.
MOUNTING IS BEHIND REMOVABLE FRONT COVER.
Visit www.McLeanCoolingTech.com to download 2D and 3D CAD drawings into the overall design of your electronic system.
146
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Notes
CLIMAGUARD HEX
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
147
McLean Cooling Technology: Air-To-Air Heat Exchangers
CLIMAGUARD™ Outdoor Heat Exchanger

McLean Cooling Technology: Custom Cooling Solutions: 
Engineered Solutions 
Engineered Protective Cooling Solutions
From simple blowers to packaged heat exchanger cores and sophisticated
water-cooling devices, Pentair Technical Products designs and manufactures
McLean engineered thermal management systems for virtually any
electronics cooling application. No one matches our flexibility, engineering experience and speed-to-market,
thanks to these custom solution capabilities:
• 100+ combined years of thermal management engineering experience
• Rapid component prototyping
• Extensive in-house test facilities—CFD modeling, thermal cycling, salt fog,
sound chamber and airflow
• UL client test data program for fast agency approvals
ENGINEERED SOLUTION PROCESS
Each design-to-spec cooling project is assigned a lead thermal engineer and
supported by a dedicated cross-functional team. We then follow a proven
development process from start to finish with every customer, ensuring
timely and successful delivery of the engineered thermal solution.
McLean ENGINEERED Solution Development Process
148
Subject to change without notice
Customer Needs
Assessment
Cooling Design
Co-Development
Rapid 
Prototyping
In-House
Performance
Testing
Manufacturing
Quality Control
Follow-Up
Field Service
Support
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products

: 
Engineered Solutions

Delivered with unparalleled flexibility,
engineering experience and speed-to-market
Engineered AIR CONDITIONER solutions
McLean engineered air conditioner solutions are designed and built by
some of the most knowledgeable engineers in the industry. Using proven,
environmentally friendly components, our experts can develop an energyefficient, low-noise, reliable cooling system that fits your unique cooling
requirements.
Pentair Technical Products also offers McLean custom electronic controls to
enhance performance and protect your electronics. These intelligent control
systems range from low-cost airflow sensors to complex configurations with
multiple sensors monitoring and reporting cooling status, faults and remote
communications.
Your engineered unit will undergo our in-house “severe conditions” test to
ensure it meets your exact performance parameters. We will ensure each air
conditioner meets UL, cUL, CSA, Bellcore, NEMA, IEC, European Safety and FCC
compliances and standards. On-site UL certification is also available.
engineered HEAT EXCHANGER solutions
Pentair Technical Products cooling experts work closely with your project
team to design, develop and manufacture engineered heat exchanger
solutions to your exact specifications. Engineered units are available with AC
and DC high-efficiency air movers or DC-only with a battery backup.
We offer corrosion-resistant designs and finishes such as conversion coating,
powder paint and chromate. Intelligent controls can be added with functions
you specify, including speed control, fault indication, diagnostics, power
conditioning, filtering and RS232 and I2C communications.
Using proprietary software to develop custom heat exchanger prototypes, we
can test several unit dimensions and predict performance prior to build. And
if your lead time is short, prototypes can often be manufactured in less than
two weeks.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
149
WARRANTY
McLean Cooling Technology: After-Market Customer Support
Terms and Conditions - Warranty
McLean Cooling Technology
After-Market Customer Support
Terms and Conditions - Warranty
Terms and Conditions
Order Acceptance and Payment Terms
All purchase orders must be in writing and are subject to Pentair Technical Products credit approval. Minimum order amount is $50 but
subject to minimum buys of purchased parts. Payment terms are net thirty (30) days from invoice date, with a 1.5% per month (eighteen
(18%) per annum) finance charge on overdue amounts. All freight will be prepaid and added to the invoice, unless otherwise specified by the
Buyer. If the price includes transportation or other shipping charges, any increase in transportation rates or other shipping charges from date
of quotation or purchase order shall be paid by Buyer.
Prices
Notwithstanding, Pentair Technical Products reserves the right to adjust prices at any time in order to reflect increases in the cost to Pentair
Technical Products of any of the raw materials, component parts, or freight or transportation expenses necessary to produce and deliver the
Products. In addition, Pentair Technical Products reserves the right to adjust the prices at any time in order to reflect fluctuations in currency
valuation or exchange rates.
Shipment
Shipment is F.O.B. Pentair Technical Products plant or other place of manufacture, unless otherwise specified. The risk of loss of the Goods
(including damage or destruction thereto) passes to customer upon shipment. Unless shipping arrangements are specified by customer,
Pentair Technical Products will make reasonable arrangements for shipment.
Shipment Damage And Claims
All shipping claims resulting from damage incurred during transit or loss of goods are the direct responsibility of the Buyer. Pentair Technical
Products will provide necessary documentation, to support Buyer’s direct claim with Carrier.
Buyer must notify Pentair Technical Products and the carrier within seven (7) days of the receipt of Goods of any damage to, or partial loss of,
the Goods during transit. Buyer must also notify Pentair Technical Products and the carrier within fourteen (14) days from shipment of any
non-delivery of the Goods. Failure to give such timely notice relieves Pentair Technical Products of the responsibility of supporting Buyer’s
claim.
Delivery
Pentair Technical Products will use reasonable commercial efforts to fill orders within the time stated, but the stated delivery date is
approximate only, and Pentair Technical Products reserves the right to re-adjust delivery dates. Under no circumstances will Pentair Technical
Products be responsible for or incur any liability for damages, costs or expenses of any nature (whether general, consequential, as a penalty
or as liquidated damages or otherwise) due to any delays in delivery, or failure to make delivery at an agreed or specified time due to
circumstances beyond Pentair Technical Products’ reasonable control. Acceptance by Buyer of the Goods when received waives any claim
for loss or damage resulting from a delay, regardless of the cause of the delay. If shipment is delayed or suspended by Buyer, Buyer shall pay
the invoice price for the Goods as per payment terms, together with Pentair Technical Products’ handling and storage charges in effect and
demurrage charges if loaded on rail cars.
Order Changes, Push Outs And Expedites
All change order requests must be submitted in writing. Requests will be reviewed for viability and approval is at the discretion of Pentair
Technical Products. Change orders are not valid until acknowledged by Pentair Technical Products. Orders may not be placed on indefinite
hold. Order push-out requests must be accompanied with firm rescheduled ship dates and may be subject to an additional Pentair Technical
Products carrying charge of 1.67% per month for handling and storage. Expedited delivery requests will be reviewed case by case. Expedite
fees are 20% of order premium plus all vendor expedite charges.
Specifications
Pentair Technical Products may, at its option, make changes in the design, construction, arrangement or components of the Goods if, in
Pentair Technical Products’ judgment, such changes will be beneficial to the operation of the Goods. Buyer may not make any changes in the
specifications for the Goods unless Pentair Technical Products approves of such changes by a signed writing, in which event Pentair Technical
Products may make additional charges for such changes.
Cancellation
Buyer may not cancel orders placed with Pentair Technical Products, except with Pentair Technical Products’ written consent and then
only if Buyer makes payment to Pentair Technical Products to indemnify it against loss, including but not limited to expenses incurred and
commitments made by Pentair Technical Products. In addition to such charges previously mentioned, any cancellations approved by Pentair
Technical Products shall be subject to a cancellation charge of fifteen percent (15%) of the net price. If modifications, specifically ordered by
the Buyer, are being made to the cancelled merchandise, the cancellation charge will also include the cost for such modifications made up to
the date of cancellation.
150
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Warranty
Pentair Technical Products warrants that the Goods manufactured by Pentair Technical Products will be free from defects in material and
workmanship for a period of one (1) year from the date of shipment by Pentair Technical Products, subject to the following conditions and
exclusions:
A. Conditions
All Goods must be installed and operated according to the following specifications:
1. Maximum voltage variation no greater than plus or minus 10% of nameplate nominal rating
2. Maximum frequency variation no greater than plus or minus 3 Hz. of nameplate nominal rating
3. Must not exceed minimum and maximum stated temperatures on the nameplate
4. Must not exceed (BTU/Hr) rating, including any heat sink as indicated on the nameplate
5. Refrigerant bearing Goods must not be restarted for a period of one (1) minute after intentional or accidental shut-off
6. The filters (if applicable) must be cleaned regularly
7. The Goods and any parts thereof must not be modified, unless prior written authorization is received from Pentair Technical Products
8. All Goods must be installed and grounded in accordance with all relevant electrical and safety codes, as well as the National Electric
Code and OSHA rules and regulations
9. All Goods must be installed in a stationery application, free of vibration
A violation of any one of these conditions shall render the warranty hereunder void and of no effect.
B. Exclusions
This warranty shall be void if product is misapplied in any way or:
1. Buyer specified product is inappropriate for system or environment it is operating in
2. Pentair Technical Products product modified in any way without prior written authorization from Pentair Technical Products
3. Removal or modification of Pentair Technical Products label affixed to product without written Pentair Technical Products approval
In the event of a warranty claim, Buyer is to return defective goods to Pentair Technical Products in accordance with Pentair Technical
Products Return Policy. Warranty period for repaired goods remains at 1 year from shipment of original goods. Pentair Technical Products’
sole obligation to Buyer under this warranty will be, at Pentair Technical Products’ option:
A. Repair or replace Pentair Technical Products McLean brand products or parts found to be defective in material or workmanship
B. Issue credit for the purchase price paid by Buyer relating to such defective Goods or part
THIS WARRANTY CONSTITUTES THE ENTIRE WARRANTY WITH RESPECT TO THE GOODS AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
151
WARRANTY
Pentair Technical Products must be notified of a claim in writing not later than fourteen (14) days from the date when Buyer has become
aware of such occurrence, or where the defect is such that it may cause damage, immediately, such notice containing a description of how
the defect manifests itself. Failure to provide such prompt notice to Pentair Technical Products shall result in forfeiture of Buyer’s rights under
this warranty.
McLean Cooling Technology: After-Market Customer Support
Terms and Conditions - Warranty
WARRANTY
McLean Cooling Technology: After-Market Customer Support
Terms and Conditions - Warranty
Return and Repair Policy
McLean brand products that: (i) are made to order, (ii) have been modified by Buyer, (iii) have special finishes, or (iv) are determined by Pentair
Technical Products to constitute “custom” products that cannot be returned to stock or resold to other Buyers, will not be accepted for return
by Pentair Technical Products.
All returns require a Return Material Authorization number (RMA #), regardless of reason for return, whether it be for warranty or out of
warranty repair. Returns without an RMA # will be refused by our Receiving Department. An RMA # is valid for 60 days.
A. An RMA # will be issued by our Repair Department in Anoka, MN at 763-422-2277 or 800-896-2665 (toll free in the US). After hours call
888-632-0092. Buyer should have the following information available at time of RMA request:
1. Complete Model Number, Serial Number and description of damaged unit being returned
2. Original Buyer Purchase Order number and date product was received by Buyer
3. Quantity to be returned and a brief description of failure for each unit, if different
4. Contact information of Buyer that must include: name of company, billing and shipping address, phone number, fax number, freight
carrier, and the name and phone number of a Buyer contact who can elaborate on the claimed defect in detail
5. Buyer must provide a Repair Purchase Order number for both warranty and out of warranty repairs. The PO will not exceed 50% of a
new unit. Buyer will be notified of repair charges that exceed approved PO amount.
B. All returns to Pentair Technical Products must be securely packed, using original cartons if possible. All returns must have the RMA
number visible on the outside of the carton. Pentair Technical Products is not responsible for material damaged in transit. Any
refrigerant-bearing Goods must be shipped upright for return.
C. Shipping cost for all non-warranty repairs is the responsibility of the sender and must be shipped prepaid. Shipping costs for all warranty
related repairs will be covered by Pentair Technical Products provided the goods are returned using a Pentair Technical Products
approved carrier. If after diagnosis the product is determined by Pentair Technical Products not be covered under warranty, Buyer will be
responsible for all shipping charges and will be billed accordingly.
D. Non-warranty repairs are subject to a $75 minimum analysis fee. Analysis fee will be waived if Buyer approves repair work. If approval is
not received within 30 days, material will be scrapped and all shipping expenses and corresponding analysis fees will be billed to Buyer.
E. At Buyer’s request, Failure Analysis can be provided by Pentair Technical Products for warrantable goods at no charge. Failure analysis for
non-warranty repairs are subject to a $100 per hour engineering charge plus any other incurred testing costs.
F. All returned merchandise must be sent to the following address: Pentair Technical Products, 2100 Hoffman Way, Anoka, MN 55303-1745
G. Credit for accepted returns shall be at the original selling price or the current selling price, whichever is lower, less the restocking charge
indicated as follows:
1. Within 60 days of invoice date - 20% of applicable selling price
2. Within 61-120 days of invoice date - 30% of applicable selling price
3. Within 121-180 days of invoice date - 40% of applicable selling price
4. Beyond 180 days - subject to individual review by Pentair Technical Products
If product being returned for credit requires repair or modification, the cost of any labor or material necessary to bring product into saleable
condition will be deducted from credit. Buyer may not take credit against returns without prior written Pentair Technical Products approval.
LIMITATION OF LIABILITY. PENTAIR TECHNICAL PRODUCTS WILL NOT BE LIABLE UNDER ANY CIRCUMSTANCES FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES, INCLUDING WITHOUT LIMITATION ANY LOST PROFITS OR LABOR COSTS, ARISING FROM THE
SALE, USE OR INSTALLATION OF THE GOODS, FROM THE GOODS BEING INCORPORATED INTO OR BECOMING A COMPONENT OF ANOTHER
PRODUCT, FROM ANY BREACH OF THIS AGREEMENT OR FROM ANY OTHER CAUSE WHATSOEVER, WHETHER BASED ON WARRANTY
(EXPRESSED OR IMPLIED) OR OTHERWISE BASED ON CONTRACT, OR ON TORT OR OTHER THEORY OF LIABILITY, AND REGARDLESS OF ANY
ADVICE OR REPRESENTATIONS THAT MAY HAVE BEEN RENDERED BY PENTAIR TECHNICAL PRODUCTS CONCERNING THE SALE, USE OR
INSTALLATION OF THE GOODS.
152
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products

Notes
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
153

Model Number Index
Model Number
Page
Model Number
Page
33-0416-GW010
107
LB11-0416-GW008
111
33-0426-GW012
107
LB11-0426-GW010
111
33-0426-GW014
107
M13-0116-G1014
71
CR23-0216-G002
95
M13-0116-G400
71
CR23-0226-G002
95
M13-0126-G1009
71
CR23-0246-G400
95
M17-0216-G009
73
CR29-0216-G002
98
M17-0226-G004
73
CR29-0226-G002
98
M17-0246-G1400
73
CR29-0246-G400
98
M26-0646-G400
77
CR29-0416-G002
98
M28-0216-G013
75
CR29-0426-G002
98
M28-0226-G004
75
CR29-0446-G400
98
M28-0246-G400
75
CR43-0616-G002
101
M28-0416-G007
76
CR43-0626-G002
101
M28-0426-G032
76
CR43-0646-G400
101
M28-0446-G400
76
CR43-0816-G002
101
M28-0616-G005
77
CR43-0816-GW0XX
109
M28-0626-G005
77
CR43-0826-G002
101
M33-0416-G010
79
CR43-0826-GW0XX
109
M33-0426-G009
79
CR43-0846-G400
101
M33-0446-G400
79
G52-0816-G050
21
M36-0616-G307
81
G52-0816-G150
21
M36-0626-G306
81
G52-0826-G050
21
M36-0646-G400
81
G52-0826-G150
21
M52-0446-G002
83
G52-0846-G050
21
M52-0646-G002
83
G52-0846-G150
21
M52-0846-G002
83
G52-1216-G050
21
M52-1046-G002
83
G52-1216-G150
21
MHB11-0216-G306
89
G52-1226-G050
21
MHB11-0226-G306
89
G52-1226-G150
21
MHB11-0246-G400
89
G52-1246-G050
21
MHB11-0416-G307
90
G52-1246-G150
21
MHB11-0426-G306
90
G57-2026-G050
28
MHB11-0446-G400
90
G57-2026-G150
28
T15-0116-G150
37
G57-2046-G050
28
T15-0126-G150
37
G57-2046-G150
28
T20-0216-G150
40
154
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products

Model Number Index
Model Number
Page
Model Number
Page
T20-0226-G150
40
TX52-8326-100
145
T20-0246-G400
40
TX52-8348-100
145
T29-0416-G150
43
XR20-0216-012
117
T29-0426-G150
43
XR20-0226-012
117
T29-0446-G400
43
XR29-0816-012
119
T43-0616-G150
46
XR29-0826-012
119
T43-0626-G150
46
XR29-1816-012
121
T43-0646-G400
46
XR29-1826-012
121
T43-0816-G150
48
XR47-2416-012
123
T43-0826-G150
48
XR47-2426-012
123
T43-0846-G150
48
XR47-3516-012
125
T43-1016-G150
50
XR47-3526-012
125
T43-1026-G150
50
XR60-5516-012
127
T43-1046-G400
50
XR60-5526-012
127
T50-1226-G150
53
XR60-8416-012
129
T50-1246-G400
53
XR60-8426-012
129
T53-1926-G150
56
T53-1946-G400
56
T62-2226-G150
59
T62-2246-G400
59
T70-3626-G150
62
T70-6026-G150
65
TX23-1416-100
135
TX23-1424-100
135
TX23-1426-100
135
TX23-1448-100
135
TX33-2816-100
139
TX33-2824-100
139
TX33-2826-100
139
TX33-2848-100
139
TX38-5616-100
141
TX38-5624-100
141
TX38-5626-100
141
TX38-5648-100
141
TX52-8316-100
145
TX52-8324-100
145
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
155

McLean Cooling Technology: Aftermarket Customer Support
Aftermarket Services - Repair
Global Field Repair Network
Over 1,000 field repair technicians worldwide
Unlike some electronics cooling companies, Pentair Technical Products
comes to you or wherever your system is deployed worldwide for repair
services, eliminating the hassle and wait of sending your cooling unit back to
headquarters. We have over 1,000 certified field repair technicians worldwide who have been
carefully screened to conduct warranty and non-warranty work on your McLean air
conditioner, heat exchanger or air mover. McLean Global Field Repair Network
Scheduling a McLean service repair technician is easy any day and time of 
the week.
24/7 emergency repair services,
extended warranties and
preventative maintenance
programs are also available.
Check with McLean aftermarket
services for details.
By Phone Monday-Friday from 7:00 a.m. to 5:30 p.m. US Central time
Call McLean aftermarket services at Pentair Technical Products
1-866-545-5252 (toll-free in the US)
+1 763-422-2171 (outside the US)
After business hours, call:
Johnson-Northwest (McLean Service Partner)
1-888-632-0092
OnLine
McLeanCoolingTech.com/Service---Repair/Repair-Service-Request.aspx
156
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com © 2010 Pentair Technical Products
Aftermarket Services - Parts
Spare Parts Store
Safe, secure and easy to use

If you wish to repair a McLean cooling unit yourself, we have two ways to
order spare parts—by phone and online.
BY PHONE
Call McLean customer service at Pentair Technical Products.
1-800-896-2665 (toll-free in the US)
+1 763-422-2277 (outside the US)
Monday-Friday from 7:00 a.m. to 5:30 p.m.
US Central time
ONLINE
The McLean online spare parts store is completely safe, secure and easy to
use. Simply visit McLeanCoolingTech.com then click on “Parts Store” in the
main menu.
McLean OnLine Spare Parts Store
You can search for your McLean spare parts by part number, model number
or part category. The entire online shopping experience is user friendly.
And at the end of the process, you may pay by credit card, or we can send
you an invoice.
Subject to change without notice
800-896-2665 • McLeanCoolingTech.com
© 2010 Pentair Technical Products
About Pentair Technical Products
Pentair Technical Products, a Pentair global business unit, is the leading provider of
worldwide product and service solutions for enclosing, protecting and cooling
electrical and electronic systems. Its industry-leading brands­—Hoffman®, Schroff®,
McLean® Cooling Technology, Calmark®, Birtcher®, Aspen Motion Technologies™ and
Taunus™ —provide a broad variety of standard, modified and engineered solutions to the
commercial, communications, energy, general electronics, industrial, infrastructure,
medical, and security and defense markets.
Manufacturing and Logistics Locations
11
9 10
1
5
7
6
2 3
4
13
14
15
12
16
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Anoka, MN
Mt. Sterling, KY
Radford, VA
Warwick, RI
San Diego, CA
Reynosa, Mexico
Pharr, Texas
Boituva, Brazil
Betschdorf, France
Straubenhardt, Germany
Dzierzoniow, Poland
Bangalore, India
Qingdao, China
Meiwa, Japan
Shanghai, China
Singapore
Melbourne, Australia
17
Regional Headquarters
North America
Pentair Technical Products
2100 Hoffman Way
Anoka, Minnesota 55303-1745
U.S.A.
Tel: +1-763-421-2240
Brazil
Pentair Technical Products
(Taunus Metalurgica LTDA)
Rua Joao Marcon, 165
18550.000 – Centro
Boituva – SP
Tel: +55 15 3363 9100
Europe
Pentair Technical Products
Langenalber Straße 96-100
75334 Straubenhardt, Germany
Tel: +49 (0) 7082 794-0
China
Pentair Technical Products
21st Floor of Cloud Nine Plaza
No. 1118 West Yan‘an Road
Changning District, Shanghai
P.R. China
Tel: +86 400 820 1133
Singapore
Pentair Technical Products
Hoffman Schroff Pte Ltd.
18 Boon Lay Way
TradeHub 21, #04-110/111
Singapore 609966
Tel: +65 6795 2213
For worldwide locations, see pentairtechnicalproducts.com
©2010 Pentair Technical Products
Cat-00024 A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising