Catalogue Sheet: HZ Series

Catalogue Sheet: HZ Series
Type:
new features
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
HZ SERIES
LED Exit Combo, Hazardous
Locations: Class I Div 2,
Class II Div 1&2 and Class III
n
FEATURES
•Includes the addition of Class II Div 1&2
Groups E, F and G as well as Class III
ratings
• Certified Class I Zone 2, Groups IIA, IIB
and IIC
• Certified Class I Division 2, Groups A, B,
C and D as per CSA C22.2
No.137-M1981
• Certified temperature Codes for several
types of emergency lamps
• Certified CSA C22.2 No141
• Certified CSA C860
• Polymeric frame, with built-in gasket
to prevent water infiltration
• Heavy-duty 1/8” thick aluminum back
plate with keyholes for secure
wall-mount installation
• Sealed polycarbonate faceplate
of heavy-duty, vandal-resistant
• Suited for areas with the risk of
flammable gases, vapors or liquids that
can create an explosive atmosphere
• Exit Sign module illuminated by longlife, energy-efficient ALINGAP red LEDs
• Two MR16 halogen lamps, shielded by
a cast aluminum housing and a
polycarbonate cover
• 5W LED emergency lights provide
60 ft of egress illumination on a 6-foot
wide path
n • 6W LED emergency lights provide
100 ft of egress illumination
on a 6-foot wide path
• Sealed, maintenance-free, Lead-Calcium
or Nickel-Cadmium batteries
n • Remote load capacity: covers with LED
lights 200 ft up to 800 ft of egress
illumination
• Comes standard with auto-diagnostic
functions
• ½” electrical conduit entry on both
sides and at the top
• NEXUS® compatible (for more
information on NEXUS®, contact your
sales representative)
Supply and install Ready-Lite® HZ Series combination emergency light battery unit and LED Exit Sign.
Designed specifically for hostile environments, the equipment frame shall be of industrial grade polymer
with gaskets around both sides of the frame contour. The back plate shall be made of 1/8” thick aluminum
sheet and shall include knockouts for installation on an electrical box and four keyholes for alternative installation on a wall surface. The faceplate shall be constructed of heavy-duty vandal-resistant
polycarbonate and feature a uniformly illuminated legend.
The light source shall be light emitting diodes (LED). Red LED technology shall be ALINGAP. An LED-sensitive diffuser shall be mounted behind the legend to provide the 6” high by 3/4” stroke letters with even
illumination. When specified, the equipment shall have attached a lower compartment containing
two emergency lights with adjustable swivels and long-life MR-16 halogen lamps of
V and
W. The lamps shall be shielded by cast aluminum housing and protected by a shock-absorbent,
transparent polycarbonate cover.
The equipment shall be certified for Hazardous Locations: Class I Division 2 Groups A, B, C and D, Class II
Divison 1&2 Groups E, F and G as well as Class III. The standard AC input voltage shall be 120/347VAC. The
equipment shall be equipped with a magnetic test switch located behind the face plate and two LED pilot
lights: AC-on and “Service required”.
The unit shall include self-testing/self-diagnostic functions monitored by a micro-controller and shall
automatically self test for one minute every 30 days, 10 minutes in the 6th month and 30 minutes annually.
The “Service required” LED shall light when a fault is detected. A four-LED diagnostic display located inside
the equipment shall identify the source of the failure (battery, charger circuitry, or lamp load).
The Exit Sign module shall be CSA-C860 approved.
The combination unit shall be Ready-Lite® Model:
.
H A Z A R D O U S L O C AT I O N FA M I LY C L A S S I , I I A N D I I I
RH P. 68
TUFHZ P. 69
RHC Combo P. 70-71
LDX-HZ Battery P. 130-131
NMHZ Remote P. 164
WIRE GUARDS
460.0078-RL
wall mount
TEMPERATURE CODES (CLASS I DIVISION 2)
LAMP RATING
TEMPERATURE CODE
MAX. TEMPERATURE
REPLACEMENT LAMP
6V-10W
T3C
160°C
580.0079-RL
12V-12W
T3A
180°C
580.0080-RL
12V-20WH
T2D
215°C
580.0068-RL
6V-4W LED
T4A
120°C
580.0097-RL
12V-4W LED
T4A
120°C
580.0093-RL
12V-5W LED
T4A
120°C
580.0104-RL
12V-6W LED
T4
135°C
580.0106-RL
POWER CONSUMPTION
MODEL
AC SPECS
HZ36N
H12Z60
120/347VAC
H12H10
74
WATTAGE CAPACITY
30MIN
1H00
1H30
2H00
0.15/0.06 A
36
30
20
15
4H00
-
0.30/0.10 A
60
40
30
20
10
0.30/0.10 A
100
72
40
36
18
Type:
new features
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
DIMENSIONS
Dimensions are approximate and subject to change.
14-1/2” [36.8 cm]
HZ SERIES
3-1/2” [8.7 cm]
LED Exit Combo, Hazardous
Locations: Class I Div 2,
Class II Div 1&2 and Class III
6-1/4” [15.9 cm]
12-5/8” [31.1 cm]
13-3/4” [34.9 cm]
ORDERING INFORMATION
CAPACITY
NUMBER OF
HEADS
HEAD STYLE/ WATTAGE
HZ36N= 6
V-36W, NiCad
Blank= no heads* LD1= MR16 LED, 6V-4W
H12Z60= 1
2V-60W, NiCad 2= two heads
LD7= MR16 LED, 12V-4W
H12H10= 1
2V-100W, NiMH
LD9= MR16 LED, 12V-5W
LD10= MR16 LED, 12V-6W
MJ= MR16 halogen,
6V-10W
MK= MR16 halogen,
12V-12W
MW= MR16-IR, 12V-20W,
high output
HOUSING
FACE COLOUR
GG= grey/grey
VOLTAGE
Blank= 120/347VAC
U2= 120/277VAC
LEGEND COLOUR
Blank= red legend
G= green legend
CHARGER TYPE
AD= auto-diagnostics, audible
ADN= auto-diagnostics, non-audible
NEX= NEXUS® system interface*
NEXRF= wireless NEXUS® system
interface*
*Not all options available with NEXUS®
System. Please consult your sales
representative.
*Remote load must
be connected.
EXAMPLE: HZ36N2MJGGAD
75
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement